# Esperanto translations for GNU coreutils. # Copyright (C) 2014 Free Software Foundation, Inc. # This file is distributed under the same license as the coreutils package. # # Eta klarigo pri la stilo de la tradukoj: # La mesaĝo kiu priskribas komandon uzas prezenton (-as); # la priskriboj de opcioj uzas infinitivon (-i); # ordonoj al la uzanto uzas imperativon (-u). # # To get myself started, in September 2010 I downloaded the coreutils_eo.po # file from Launchpad. Since then the messages have been edited so much, # that only a few of the original phrases remain unmodified. To note: # just a handful from Aisano, Goren, and Kristjan Schmidt. -- Benno # # Ekde septembro 2012 mi ofte bazigis miajn aldonajn tradukojn # sur la tradukojn de Sian Mountbatten. Mi dankas. -- Benno # # "Blauwbloemen greuit veural op akkers, tussen 't groan." # # Benno Schulenberg , 2011, 2012, 2013, 2014, 2017. msgid "" msgstr "" "Project-Id-Version: coreutils-8.27-pre1\n" "Report-Msgid-Bugs-To: bug-coreutils@gnu.org\n" "POT-Creation-Date: 2021-09-20 22:04+0100\n" "PO-Revision-Date: 2017-04-23 13:57+0200\n" "Last-Translator: Benno Schulenberg \n" "Language-Team: Esperanto \n" "Language: eo\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Bugs: Report translation errors to the Language-Team address.\n" "Plural-Forms: nplurals=2; plural=n != 1;\n" "X-Generator: Lokalize 1.0\n" #: lib/argmatch.c:132 #, c-format msgid "invalid argument %s for %s" msgstr "nevalida argumento %s por %s" #: lib/argmatch.c:133 #, c-format msgid "ambiguous argument %s for %s" msgstr "plursenca argumento %s por %s" #: lib/argmatch.c:152 lib/argmatch.h:223 msgid "Valid arguments are:" msgstr "Validaj argumentoj estas:" #: lib/closein.c:100 msgid "error closing file" msgstr "eraro dum fermado de dosiero" #: lib/closeout.c:122 src/basenc.c:929 src/basenc.c:939 src/basenc.c:945 #: src/basenc.c:988 src/basenc.c:1052 src/cat.c:190 src/cat.c:206 #: src/cat.c:290 src/cat.c:795 src/expand.c:149 src/expand.c:174 #: src/factor.c:2356 src/mktemp.c:339 src/od.c:969 src/paste.c:163 #: src/seq.c:295 src/shuf.c:596 src/split.c:939 src/split.c:1193 #: src/split.c:1198 src/tail.c:1271 src/tail.c:1425 src/tail.c:2487 #: src/tr.c:1587 src/tr.c:1813 src/tr.c:1905 src/unexpand.c:233 #: src/unexpand.c:249 #, c-format msgid "write error" msgstr "skrib-eraro" #: lib/copy-acl.c:54 src/copy.c:1485 src/copy.c:3026 #, c-format msgid "preserving permissions for %s" msgstr "konserviĝas permesoj pri %s" #: lib/error.c:195 msgid "Unknown system error" msgstr "Nekonata sistemeraro" #: lib/file-type.c:40 msgid "regular empty file" msgstr "normala malplena dosiero" #: lib/file-type.c:40 msgid "regular file" msgstr "normala dosiero" #: lib/file-type.c:43 msgid "directory" msgstr "dosierujo" #: lib/file-type.c:46 msgid "symbolic link" msgstr "simbola ligo" #: lib/file-type.c:52 msgid "message queue" msgstr "mesaĝovico" #: lib/file-type.c:55 msgid "semaphore" msgstr "semaforo" #: lib/file-type.c:58 msgid "shared memory object" msgstr "komuna memorobjekto" #: lib/file-type.c:61 msgid "typed memory object" msgstr "tipita memorobjekto" #: lib/file-type.c:66 msgid "block special file" msgstr "blokaparatdosiero" #: lib/file-type.c:69 msgid "character special file" msgstr "signoaparatdosiero" #: lib/file-type.c:72 msgid "contiguous data" msgstr "koneksaj datumoj" #: lib/file-type.c:75 msgid "fifo" msgstr "vicmemoro" #: lib/file-type.c:78 msgid "door" msgstr "door-o" #: lib/file-type.c:81 msgid "multiplexed block special file" msgstr "multipleksorata blokaparatdosiero" #: lib/file-type.c:84 msgid "multiplexed character special file" msgstr "multipleksorata signoaparatdosiero" #: lib/file-type.c:87 msgid "multiplexed file" msgstr "multipleksorata dosiero" #: lib/file-type.c:90 msgid "named file" msgstr "nomata dosiero" #: lib/file-type.c:93 msgid "network special file" msgstr "retaparatdosiero" #: lib/file-type.c:96 msgid "migrated file with data" msgstr "migrita dosiero kun datumoj" #: lib/file-type.c:99 msgid "migrated file without data" msgstr "migrita dosiero sen datumoj" #: lib/file-type.c:102 msgid "port" msgstr "pordo" #: lib/file-type.c:105 msgid "socket" msgstr "konektilo" #: lib/file-type.c:108 msgid "whiteout" msgstr "" #: lib/file-type.c:110 msgid "weird file" msgstr "stranga dosiero" #: lib/gai_strerror.c:57 msgid "Address family for hostname not supported" msgstr "Ne subteniĝas adresfamilio por komputilretnomo" #: lib/gai_strerror.c:58 msgid "Temporary failure in name resolution" msgstr "Dumtempa malsukceso ĉe nom-eltrovo" #: lib/gai_strerror.c:59 msgid "Bad value for ai_flags" msgstr "Misa valoro por 'ai_flags'" #: lib/gai_strerror.c:60 msgid "Non-recoverable failure in name resolution" msgstr "Neriparebla malsukceso ĉe nom-eltrovo" #: lib/gai_strerror.c:61 msgid "ai_family not supported" msgstr "'ai_family' ne subtenatas" #: lib/gai_strerror.c:62 msgid "Memory allocation failure" msgstr "Mankas sufiĉa memoro" #: lib/gai_strerror.c:63 msgid "No address associated with hostname" msgstr "Neniu adreso estas asociata kun nomo de gastiga komputilo" #: lib/gai_strerror.c:64 msgid "Name or service not known" msgstr "Nomo aŭ servo ne konatas" #: lib/gai_strerror.c:65 msgid "Servname not supported for ai_socktype" msgstr "'servname' ne subtenatas por 'ai_socktype'" #: lib/gai_strerror.c:66 msgid "ai_socktype not supported" msgstr "'ai_socktype' ne subtenatas" #: lib/gai_strerror.c:67 msgid "System error" msgstr "Sistemeraro" #: lib/gai_strerror.c:68 msgid "Argument buffer too small" msgstr "Bufro por argumentoj tro malgrandas" #: lib/gai_strerror.c:70 msgid "Processing request in progress" msgstr "Traktado de peto daŭras" #: lib/gai_strerror.c:71 msgid "Request canceled" msgstr "Peto nuligitas" #: lib/gai_strerror.c:72 msgid "Request not canceled" msgstr "Peto ne nuligitas" #: lib/gai_strerror.c:73 msgid "All requests done" msgstr "Ĉiuj petoj estas plenumitaj" #: lib/gai_strerror.c:74 msgid "Interrupted by a signal" msgstr "Interrompita per signalo" #: lib/gai_strerror.c:75 msgid "Parameter string not correctly encoded" msgstr "Parametra ĉeno ne estas ĝuste kodita" #: lib/gai_strerror.c:87 msgid "Unknown error" msgstr "Nekonata eraro" #: lib/getopt.c:278 #, fuzzy, c-format #| msgid "%s: option '%s' is ambiguous\n" msgid "%s: option '%s%s' is ambiguous\n" msgstr "%s: opcio «%s» estas plursenca\n" #: lib/getopt.c:284 #, fuzzy, c-format #| msgid "%s: option '%s' is ambiguous; possibilities:" msgid "%s: option '%s%s' is ambiguous; possibilities:" msgstr "%s: opcio «%s» estas plursenca; eblaĵoj estas:" #: lib/getopt.c:319 #, fuzzy, c-format #| msgid "%s: unrecognized option '%c%s'\n" msgid "%s: unrecognized option '%s%s'\n" msgstr "%s: nekonata opcio «%c%s»\n" #: lib/getopt.c:345 #, fuzzy, c-format #| msgid "%s: option '%c%s' doesn't allow an argument\n" msgid "%s: option '%s%s' doesn't allow an argument\n" msgstr "%s: opcio «%c%s» ne toleras argumenton\n" #: lib/getopt.c:360 #, fuzzy, c-format #| msgid "%s: option '--%s' requires an argument\n" msgid "%s: option '%s%s' requires an argument\n" msgstr "--%s: opcio «%s» bezonas argumenton\n" #: lib/getopt.c:621 #, c-format msgid "%s: invalid option -- '%c'\n" msgstr "%s: nevalida opcio -- «%c»\n" #: lib/getopt.c:636 lib/getopt.c:682 #, c-format msgid "%s: option requires an argument -- '%c'\n" msgstr "%s: opcio bezonas argumenton -- «%c»\n" #: lib/mkdir-p.c:162 src/copy.c:2009 src/copy.c:2081 src/copy.c:2654 #: src/copy.c:3013 src/find-mount-point.c:84 src/install.c:667 #: src/realpath.c:145 src/stat.c:1466 src/truncate.c:327 #, c-format msgid "cannot stat %s" msgstr "malsukcesis eltrovi statinformon pri %s" #: lib/mkdir-p.c:190 src/install.c:477 #, c-format msgid "cannot change permissions of %s" msgstr "ne eblas ŝanĝi permesojn de %s" #: lib/mkdir-p.c:200 src/copy.c:2643 src/install.c:705 src/install.c:718 #, c-format msgid "cannot create directory %s" msgstr "ne eblas krei dosierujon %s" #: lib/obstack.c:337 lib/obstack.c:339 lib/xalloc-die.c:34 src/csplit.c:234 #: src/tac.c:442 #, c-format msgid "memory exhausted" msgstr "mankas sufiĉa memoro" #: lib/openat-die.c:38 #, c-format msgid "unable to record current working directory" msgstr "ne eblas registri aktualan labordosierujon" #: lib/openat-die.c:57 src/find-mount-point.c:107 #, c-format msgid "failed to return to initial working directory" msgstr "malsukcesis reveni al komenca labordosierujo" #. TRANSLATORS: #. Get translations for open and closing quotation marks. #. The message catalog should translate "`" to a left #. quotation mark suitable for the locale, and similarly for #. "'". For example, a French Unicode local should translate #. these to U+00AB (LEFT-POINTING DOUBLE ANGLE #. QUOTATION MARK), and U+00BB (RIGHT-POINTING DOUBLE ANGLE #. QUOTATION MARK), respectively. #. #. If the catalog has no translation, we will try to #. use Unicode U+2018 (LEFT SINGLE QUOTATION MARK) and #. Unicode U+2019 (RIGHT SINGLE QUOTATION MARK). If the #. current locale is not Unicode, locale_quoting_style #. will quote 'like this', and clocale_quoting_style will #. quote "like this". You should always include translations #. for "`" and "'" even if U+2018 and U+2019 are appropriate #. for your locale. #. #. If you don't know what to put here, please see #. #. and use glyphs suitable for your language. #: lib/quotearg.c:355 msgid "`" msgstr "«" #: lib/quotearg.c:356 msgid "'" msgstr "»" #: lib/randread.c:123 #, c-format msgid "%s: end of file" msgstr "%s: fino de dosiero" #: lib/randread.c:123 src/du.c:1074 src/digest.c:1187 src/tac.c:251 #: src/tac.c:357 src/tac.c:515 src/tac.c:596 src/wc.c:929 #, c-format msgid "%s: read error" msgstr "%s: leg-eraro" #: lib/regcomp.c:135 msgid "Success" msgstr "Sukceso" #: lib/regcomp.c:138 msgid "No match" msgstr "Neniu trafo" #: lib/regcomp.c:141 msgid "Invalid regular expression" msgstr "Nevalida regulesprimo" #: lib/regcomp.c:144 msgid "Invalid collation character" msgstr "Nevalida kunmetita signo" #: lib/regcomp.c:147 msgid "Invalid character class name" msgstr "Nevalida nomo de signoklaso" #: lib/regcomp.c:150 msgid "Trailing backslash" msgstr "Malsuprenstreko '\\' ĉe la fino" #: lib/regcomp.c:153 msgid "Invalid back reference" msgstr "Nevalida retroreferenco" #: lib/regcomp.c:156 msgid "Unmatched [, [^, [:, [., or [=" msgstr "Senpara [, [^, [:, [., aŭ [=" #: lib/regcomp.c:159 msgid "Unmatched ( or \\(" msgstr "Senpara ( aŭ \\(" #: lib/regcomp.c:162 msgid "Unmatched \\{" msgstr "Senpara \\{" #: lib/regcomp.c:165 msgid "Invalid content of \\{\\}" msgstr "Nevalida enhavo de \\{\\}" #: lib/regcomp.c:168 msgid "Invalid range end" msgstr "Nevalida fino de gamo" #: lib/regcomp.c:171 msgid "Memory exhausted" msgstr "Mankas sufiĉa memoro" #: lib/regcomp.c:174 msgid "Invalid preceding regular expression" msgstr "Nevalida antaŭa regulesprimo" #: lib/regcomp.c:177 msgid "Premature end of regular expression" msgstr "Neatendita fino de regulesprimo" #: lib/regcomp.c:180 msgid "Regular expression too big" msgstr "Regulesprimo tro grandas" #: lib/regcomp.c:183 msgid "Unmatched ) or \\)" msgstr "Senpara ) aŭ \\)" #: lib/regcomp.c:676 msgid "No previous regular expression" msgstr "Mankas antaŭa regulesprimo" #: lib/root-dev-ino.h:37 #, c-format msgid "it is dangerous to operate recursively on %s" msgstr "estas danĝere operacii rikure al %s" #: lib/root-dev-ino.h:41 #, c-format msgid "it is dangerous to operate recursively on %s (same as %s)" msgstr "estas danĝere operacii rikure al %s (samkiel %s)" #: lib/root-dev-ino.h:43 #, c-format msgid "use --no-preserve-root to override this failsafe" msgstr "uzu «--no-preserve-root» por malŝalti ĉi tiun sekurilon" #. TRANSLATORS: A regular expression testing for an affirmative answer #. (english: "yes"). Testing the first character may be sufficient. #. Take care to consider upper and lower case. #. To enquire the regular expression that your system uses for this #. purpose, you can use the command #. locale -k LC_MESSAGES | grep '^yesexpr=' #: lib/rpmatch.c:150 msgid "^[yY]" msgstr "^[jJyY]" #. TRANSLATORS: A regular expression testing for a negative answer #. (english: "no"). Testing the first character may be sufficient. #. Take care to consider upper and lower case. #. To enquire the regular expression that your system uses for this #. purpose, you can use the command #. locale -k LC_MESSAGES | grep '^noexpr=' #: lib/rpmatch.c:163 msgid "^[nN]" msgstr "^[nN]" #: lib/set-acl.c:46 src/copy.c:2666 src/cp.c:514 #, c-format msgid "setting permissions for %s" msgstr "agordiĝas permesoj pri %s" # Hangup detected on controlling terminal or death of controlling process. #: lib/siglist.h:31 msgid "Hangup" msgstr "Malkonekto" # Interrupt from keyboard. #: lib/siglist.h:34 msgid "Interrupt" msgstr "Interrompo" # Quit from keyboard. #: lib/siglist.h:37 msgid "Quit" msgstr "Forlasigo" #: lib/siglist.h:40 msgid "Illegal instruction" msgstr "Miskomando" #: lib/siglist.h:43 msgid "Trace/breakpoint trap" msgstr "Spurumo-/romppunkto-komando" #: lib/siglist.h:46 msgid "Aborted" msgstr "Abortita" #: lib/siglist.h:49 msgid "Floating point exception" msgstr "Glitkomkalkul-eraro" # SIGKILL 9 Term Kill signal # Nek kaptebla nek ignorebla (malkiel ABORT) #: lib/siglist.h:52 msgid "Killed" msgstr "Buĉita" #: lib/siglist.h:55 msgid "Bus error" msgstr "Bus-eraro" # SIGSEGV 11 Core Invalid memory reference #: lib/siglist.h:58 msgid "Segmentation fault" msgstr "Adres-eraro" # SIGPIPE 13 Term Broken pipe: write to pipe with no readers #: lib/siglist.h:61 msgid "Broken pipe" msgstr "Rompita dukto" # SIGALRM 14 Term Timer signal from alarm(2) #: lib/siglist.h:64 msgid "Alarm clock" msgstr "Vekhorloĝo" # SIGTERM 15 Term Termination signal #: lib/siglist.h:67 msgid "Terminated" msgstr "Ĉesigita" #: lib/siglist.h:70 msgid "Urgent I/O condition" msgstr "Urĝa enig-/elig-stato" # SIGSTOP 17,19,23 Stop Stop process # Nek kaptebla nek ignorebla (samkiel SIGKILL) # Haltu (poste eblos plu iri, vd SIGCONT) #: lib/siglist.h:73 msgid "Stopped (signal)" msgstr "Paŭzigita (signale)" #: lib/siglist.h:76 msgid "Stopped" msgstr "Paŭzigita (uzule)" #: lib/siglist.h:79 msgid "Continued" msgstr "Daŭrigita" #: lib/siglist.h:82 msgid "Child exited" msgstr "Ido finis" # SIGTTIN 21,21,26 Stop tty input for background process #: lib/siglist.h:85 msgid "Stopped (tty input)" msgstr "Paŭzigita (pro terminalenigo)" # SIGTTOU 22,22,27 Stop tty output for background process #: lib/siglist.h:88 msgid "Stopped (tty output)" msgstr "Paŭzigita (pro terminaleligo)" #: lib/siglist.h:91 msgid "I/O possible" msgstr "Enigo/eligo eblas" #: lib/siglist.h:94 msgid "CPU time limit exceeded" msgstr "Limo de procesortempo transpasiĝis" #: lib/siglist.h:97 msgid "File size limit exceeded" msgstr "Limo de dosiergrando transpasiĝis" #: lib/siglist.h:100 msgid "Virtual timer expired" msgstr "Virtuala horloĝo transpasis limtempon" #: lib/siglist.h:103 msgid "Profiling timer expired" msgstr "Profilanta horloĝo transpasis limtempon" # SIGWINCH 28,28,20 Ign Window resize signal (4.3 BSD, Sun) #: lib/siglist.h:106 msgid "Window changed" msgstr "Fenestro ŝanĝiĝis" #: lib/siglist.h:109 msgid "User defined signal 1" msgstr "Uzula signalo 1" #: lib/siglist.h:112 msgid "User defined signal 2" msgstr "Uzula signalo 2" #: lib/siglist.h:117 msgid "EMT trap" msgstr "EMT-komando" # SIGSYS 12,-,12 Core Bad argument to routine (SVID) #: lib/siglist.h:120 msgid "Bad system call" msgstr "Misa sistemvoko" #: lib/siglist.h:123 msgid "Stack fault" msgstr "Stak-eraro" # SIGINFO 29,-,- A synonym for SIGPWR #: lib/siglist.h:126 msgid "Information request" msgstr "Informmendo" #: lib/siglist.h:128 msgid "Power failure" msgstr "Elektra provizo perdiĝis" #: lib/siglist.h:131 msgid "Resource lost" msgstr "Risurco perdiĝis" #: lib/strsignal.c:114 #, c-format msgid "Real-time signal %d" msgstr "Realtempa signalo %d" #: lib/strsignal.c:118 #, c-format msgid "Unknown signal %d" msgstr "Nekonata signalo %d" #: lib/unicodeio.c:102 msgid "iconv function not usable" msgstr "funkcio 'iconv()' ne uzeblas" #: lib/unicodeio.c:104 msgid "iconv function not available" msgstr "funkcio 'iconv()' ne disponeblas" #: lib/unicodeio.c:111 msgid "character out of range" msgstr "signo estas ekster gamo" #: lib/unicodeio.c:198 #, c-format msgid "cannot convert U+%04X to local character set" msgstr "ne eblas konverti U+%04X al loka signaro" #: lib/unicodeio.c:200 #, c-format msgid "cannot convert U+%04X to local character set: %s" msgstr "ne eblas konverti U+%04X al loka signaro: %s" #: lib/userspec.c:106 msgid "invalid user" msgstr "nevalida uzanto" #: lib/userspec.c:107 msgid "invalid group" msgstr "nevalida grupo" #: lib/userspec.c:108 msgid "invalid spec" msgstr "nevalida indiko" #: lib/verror.c:76 #, c-format msgid "unable to display error message" msgstr "ne eblas montri erarmesaĝon" #: lib/version-etc.c:73 #, c-format msgid "Packaged by %s (%s)\n" msgstr "Pakigita far %s (%s)\n" #: lib/version-etc.c:76 #, c-format msgid "Packaged by %s\n" msgstr "Pakigita far %s\n" #. TRANSLATORS: Translate "(C)" to the copyright symbol #. (C-in-a-circle), if this symbol is available in the user's #. locale. Otherwise, do not translate "(C)"; leave it as-is. #: lib/version-etc.c:83 msgid "(C)" msgstr "©" #. TRANSLATORS: The %s placeholder is the web address of the GPL license. #: lib/version-etc.c:88 #, fuzzy, c-format #| msgid "" #| "\n" #| "License GPLv3+: GNU GPL version 3 or later .\n" #| "This is free software: you are free to change and redistribute it.\n" #| "There is NO WARRANTY, to the extent permitted by law.\n" #| "\n" msgid "" "License GPLv3+: GNU GPL version 3 or later <%s>.\n" "This is free software: you are free to change and redistribute it.\n" "There is NO WARRANTY, to the extent permitted by law.\n" msgstr "" "\n" "Ĉi tiu estas libera programaro: vi rajtas ĝin ŝanĝi kaj redistribui.\n" "La ĝusta permesilo estas GPLv3+: GNU GPL versio 3 aŭ sekva;\n" "por la kompleta (angla) teksto vidu .\n" "Ĉi tiu programaro ne garantiatas, ene de la limoj de la leĝo.\n" "\n" #. TRANSLATORS: %s denotes an author name. #: lib/version-etc.c:105 #, c-format msgid "Written by %s.\n" msgstr "Verkita de %s.\n" #. TRANSLATORS: Each %s denotes an author name. #: lib/version-etc.c:109 #, c-format msgid "Written by %s and %s.\n" msgstr "Verkita de %s kaj %s.\n" #. TRANSLATORS: Each %s denotes an author name. #: lib/version-etc.c:113 #, c-format msgid "Written by %s, %s, and %s.\n" msgstr "Verkita de %s, %s kaj %s.\n" #. TRANSLATORS: Each %s denotes an author name. #. You can use line breaks, estimating that each author name occupies #. ca. 16 screen columns and that a screen line has ca. 80 columns. #: lib/version-etc.c:120 #, c-format msgid "" "Written by %s, %s, %s,\n" "and %s.\n" msgstr "" "Verkita de %s, %s, %s\n" "kaj %s.\n" #. TRANSLATORS: Each %s denotes an author name. #. You can use line breaks, estimating that each author name occupies #. ca. 16 screen columns and that a screen line has ca. 80 columns. #: lib/version-etc.c:127 #, c-format msgid "" "Written by %s, %s, %s,\n" "%s, and %s.\n" msgstr "" "Verkita de %s, %s, %s,\n" "%s kaj %s.\n" #. TRANSLATORS: Each %s denotes an author name. #. You can use line breaks, estimating that each author name occupies #. ca. 16 screen columns and that a screen line has ca. 80 columns. #: lib/version-etc.c:134 #, c-format msgid "" "Written by %s, %s, %s,\n" "%s, %s, and %s.\n" msgstr "" "Verkita de %s, %s, %s,\n" "%s, %s kaj %s.\n" #. TRANSLATORS: Each %s denotes an author name. #. You can use line breaks, estimating that each author name occupies #. ca. 16 screen columns and that a screen line has ca. 80 columns. #: lib/version-etc.c:142 #, c-format msgid "" "Written by %s, %s, %s,\n" "%s, %s, %s, and %s.\n" msgstr "" "Verkita de %s, %s, %s,\n" "%s, %s, %s kaj %s.\n" #. TRANSLATORS: Each %s denotes an author name. #. You can use line breaks, estimating that each author name occupies #. ca. 16 screen columns and that a screen line has ca. 80 columns. #: lib/version-etc.c:150 #, c-format msgid "" "Written by %s, %s, %s,\n" "%s, %s, %s, %s,\n" "and %s.\n" msgstr "" "Verkita de %s, %s, %s,\n" "%s, %s, %s, %s\n" "kaj %s.\n" #. TRANSLATORS: Each %s denotes an author name. #. You can use line breaks, estimating that each author name occupies #. ca. 16 screen columns and that a screen line has ca. 80 columns. #: lib/version-etc.c:159 #, c-format msgid "" "Written by %s, %s, %s,\n" "%s, %s, %s, %s,\n" "%s, and %s.\n" msgstr "" "Verkita de %s, %s, %s,\n" "%s, %s, %s, %s,\n" "%s kaj %s.\n" #. TRANSLATORS: Each %s denotes an author name. #. You can use line breaks, estimating that each author name occupies #. ca. 16 screen columns and that a screen line has ca. 80 columns. #: lib/version-etc.c:170 #, c-format msgid "" "Written by %s, %s, %s,\n" "%s, %s, %s, %s,\n" "%s, %s, and others.\n" msgstr "" "Verkita de %s, %s, %s,\n" "%s, %s, %s, %s,\n" "%s, %s kaj aliaj.\n" #. TRANSLATORS: The placeholder indicates the bug-reporting address #. for this package. Please add _another line_ saying #. "Report translation bugs to <...>\n" with the address for translation #. bugs (typically your translation team's web or email address). #: lib/version-etc.c:249 #, fuzzy, c-format #| msgid "" #| "\n" #| "Report bugs to: %s\n" msgid "Report bugs to: %s\n" msgstr "" "\n" "Raportu programmisojn al %s;\n" "sciigu tradukerarojn al .\n" #: lib/version-etc.c:251 #, c-format msgid "Report %s bugs to: %s\n" msgstr "Raportu programmisojn en «%s» al: %s\n" #: lib/version-etc.c:255 lib/version-etc.c:257 #, c-format msgid "%s home page: <%s>\n" msgstr "Hejmpaĝo de «%s»: <%s>\n" #: lib/version-etc.c:260 #, fuzzy, c-format #| msgid "General help using GNU software: \n" msgid "General help using GNU software: <%s>\n" msgstr "Ĝenerala helpo por uzi GNU-programojn: \n" #: lib/xbinary-io.c:37 #, fuzzy, c-format msgid "failed to set file descriptor text/binary mode" msgstr "malsukcesis agordi sekurecan kuntekston de %s" #: lib/xmemcoll.c:39 src/expr.c:924 #, c-format msgid "string comparison failed" msgstr "ĉena komparo malsukcesis" #: lib/xmemcoll.c:40 #, c-format msgid "Set LC_ALL='C' to work around the problem." msgstr "Agordu LC_ALL='C' por eviti la problemon." #: lib/xmemcoll.c:42 #, c-format msgid "The strings compared were %s and %s." msgstr "La komparitaj ĉenoj estis %s kaj %s." #: lib/xprintf.c:50 lib/xprintf.c:76 #, c-format msgid "cannot perform formatted output" msgstr "ne eblas efektivigi formatitan eligon" #: lib/xstrtol-error.c:63 #, c-format msgid "invalid %s%s argument '%s'" msgstr "nevalida argumento de %s%s: «%s»" #: lib/xstrtol-error.c:68 #, c-format msgid "invalid suffix in %s%s argument '%s'" msgstr "nevalida sufikso en argumento de %s%s: «%s»" #: lib/xstrtol-error.c:72 #, c-format msgid "%s%s argument '%s' too large" msgstr "argumento de %s%s tro grandas: «%s»" #. This is a proper name. See the gettext manual, section Names. #: src/basename.c:29 src/chgrp.c:38 src/chmod.c:39 src/chown.c:37 #: src/comm.c:39 src/cp.c:48 src/csplit.c:46 src/cut.c:45 src/date.c:40 #: src/dd.c:45 src/df.c:49 src/dirname.c:32 src/du.c:55 src/env.c:40 #: src/expand.c:48 src/fold.c:36 src/groups.c:36 src/head.c:47 src/id.c:42 #: src/install.c:51 src/ln.c:52 src/ls.c:133 src/digest.c:136 src/mkdir.c:39 #: src/mkfifo.c:36 src/mknod.c:37 src/mv.c:43 src/nice.c:40 src/nl.c:42 #: src/paste.c:53 src/pathchk.c:32 src/pinky.c:38 src/printenv.c:44 #: src/printf.c:68 src/rm.c:41 src/rmdir.c:37 src/stty.c:68 src/tac.c:58 #: src/tail.c:74 src/tee.c:38 src/touch.c:45 src/tty.c:44 src/uname.c:61 #: src/unexpand.c:49 src/uniq.c:41 src/uptime.c:46 src/users.c:36 src/wc.c:54 #: src/who.c:51 src/yes.c:32 msgid "David MacKenzie" msgstr "David MEKENZI (David MacKenzie)" #: src/basename.c:48 #, c-format msgid "" "Usage: %s NAME [SUFFIX]\n" " or: %s OPTION... NAME...\n" msgstr "" "Uzmaniero: %s NOMO [SUFIKSO]\n" " aŭ: %s OPCIO... NOMO...\n" #: src/basename.c:53 msgid "" "Print NAME with any leading directory components removed.\n" "If specified, also remove a trailing SUFFIX.\n" msgstr "" "Eligas NOMOn sen ĉiuj antaŭaj elementoj dosierujaj.\n" "Se indikata, ankaŭ forigas postan SUFIKSOn.\n" "\n" #: src/basename.c:60 msgid "" " -a, --multiple support multiple arguments and treat each as a NAME\n" " -s, --suffix=SUFFIX remove a trailing SUFFIX; implies -a\n" " -z, --zero end each output line with NUL, not newline\n" msgstr "" " -a, --multiple permesi plurajn argumentojn kaj trakti ĉiun kiel NOMOn\n" " -s, --suffix=SUFIKSO forlasi ĉi tiun SUFIKSOn kiam ĝi okazas\n" " -z, --zero disigi eligon per nulbajtoj anstataŭ per novlinioj\n" #: src/basename.c:67 #, c-format msgid "" "\n" "Examples:\n" " %s /usr/bin/sort -> \"sort\"\n" " %s include/stdio.h .h -> \"stdio\"\n" " %s -s .h include/stdio.h -> \"stdio\"\n" " %s -a any/str1 any/str2 -> \"str1\" followed by \"str2\"\n" msgstr "" "\n" "Ekzemploj:\n" " %s /usr/bin/sort -> «sort»\n" " %s include/stdio.h .h -> «stdio»\n" " %s -s .h include/stdio.h -> «stdio»\n" " %s -a ia/ĉeno1 ia/ĉeno2 -> «ĉeno1» kaj poste «ĉeno2»\n" #: src/basename.c:170 src/chcon.c:537 src/chgrp.c:279 src/chmod.c:530 #: src/chown.c:280 src/chroot.c:279 src/comm.c:481 src/csplit.c:1403 #: src/dirname.c:116 src/expr.c:347 src/join.c:1159 src/link.c:76 #: src/mkdir.c:261 src/mkfifo.c:135 src/mknod.c:176 src/nohup.c:107 #: src/pathchk.c:147 src/printf.c:693 src/readlink.c:145 src/realpath.c:236 #: src/rm.c:338 src/rmdir.c:233 src/seq.c:633 src/sleep.c:116 src/stat.c:1933 #: src/stdbuf.c:371 src/tr.c:1753 src/unlink.c:74 #, c-format msgid "missing operand" msgstr "mankas argumento" #: src/basename.c:176 src/basenc.c:1212 src/comm.c:489 src/cp.c:620 #: src/date.c:471 src/dircolors.c:448 src/du.c:1019 src/hostid.c:72 #: src/hostname.c:112 src/install.c:950 src/join.c:969 src/link.c:84 #: src/ln.c:600 src/logname.c:70 src/mknod.c:187 src/mv.c:453 src/nproc.c:115 #: src/od.c:1870 src/ptx.c:1981 src/seq.c:639 src/shuf.c:491 src/sort.c:4595 #: src/split.c:1557 src/tr.c:1768 src/tsort.c:560 src/tty.c:113 #: src/uname.c:252 src/uniq.c:520 src/uniq.c:537 src/unlink.c:80 #: src/uptime.c:252 src/users.c:145 src/wc.c:863 src/who.c:831 src/whoami.c:78 #, c-format msgid "extra operand %s" msgstr "superflua argumento: %s" #. This is a proper name. See the gettext manual, section Names. #: src/basenc.c:38 src/basenc.c:41 msgid "Simon Josefsson" msgstr "Simon ĜOSEFSON (Simon Josefsson)" #. This is a proper name. See the gettext manual, section Names. #: src/basenc.c:39 src/env.c:41 src/numfmt.c:42 msgid "Assaf Gordon" msgstr "Asaf GORDON (Assaf Gordon)" #: src/basenc.c:102 src/dircolors.c:98 src/uptime.c:199 src/users.c:105 #, c-format msgid "Usage: %s [OPTION]... [FILE]\n" msgstr "Uzmaniero: %s [OPCIO...] [DOSIERO]\n" #: src/basenc.c:107 #, fuzzy #| msgid "" #| "Usage: %s [OPTION]... [FILE]\n" #| "Base%d encode or decode FILE, or standard input, to standard output.\n" msgid "basenc encode or decode FILE, or standard input, to standard output.\n" msgstr "" "Uzmaniero: %s [OPCIO...] [DOSIERO]\n" "\n" "Kodas aŭ malkodas %d-ume DOSIEROn (aŭ ĉefenigujon) al ĉefeligujo.\n" "\n" #: src/basenc.c:111 #, fuzzy, c-format #| msgid "" #| "Usage: %s [OPTION]... [FILE]\n" #| "Base%d encode or decode FILE, or standard input, to standard output.\n" msgid "Base%d encode or decode FILE, or standard input, to standard output.\n" msgstr "" "Uzmaniero: %s [OPCIO...] [DOSIERO]\n" "\n" "Kodas aŭ malkodas %d-ume DOSIEROn (aŭ ĉefenigujon) al ĉefeligujo.\n" "\n" #: src/basenc.c:119 msgid " --base64 same as 'base64' program (RFC4648 section 4)\n" msgstr "" #: src/basenc.c:122 msgid " --base64url file- and url-safe base64 (RFC4648 section 5)\n" msgstr "" #: src/basenc.c:125 msgid " --base32 same as 'base32' program (RFC4648 section 6)\n" msgstr "" #: src/basenc.c:128 msgid " --base32hex extended hex alphabet base32 (RFC4648 section 7)\n" msgstr "" #: src/basenc.c:131 msgid " --base16 hex encoding (RFC4648 section 8)\n" msgstr "" #: src/basenc.c:134 msgid " --base2msbf bit string with most significant bit (msb) first\n" msgstr "" #: src/basenc.c:137 msgid " --base2lsbf bit string with least significant bit (lsb) first\n" msgstr "" # XXX -- Please don't use periods; use semicolons. #: src/basenc.c:141 #, fuzzy #| msgid "" #| " -d, --decode decode data\n" #| " -i, --ignore-garbage when decoding, ignore non-alphabet characters\n" #| " -w, --wrap=COLS wrap encoded lines after COLS character (default 76).\n" #| " Use 0 to disable line wrapping\n" #| "\n" msgid "" " -d, --decode decode data\n" " -i, --ignore-garbage when decoding, ignore non-alphabet characters\n" " -w, --wrap=COLS wrap encoded lines after COLS character (default 76).\n" " Use 0 to disable line wrapping\n" msgstr "" " -d, --decode malkodi la datenojn\n" " -i, --ignore-garbage ignori nealfabetajn signojn dum malkodado\n" " -w, --wrap=NOMBRO faldi koditajn liniojn post NOMBRO (defaŭlte 76)\n" " da signoj; uzu 0 por malŝalti linifaldadon\n" #: src/basenc.c:148 msgid "" " --z85 ascii85-like encoding (ZeroMQ spec:32/Z85);\n" " when encoding, input length must be a multiple of 4;\n" " when decoding, input length must be a multiple of 5\n" msgstr "" #: src/basenc.c:157 #, fuzzy msgid "" "\n" "When decoding, the input may contain newlines in addition to the bytes of\n" "the formal alphabet. Use --ignore-garbage to attempt to recover\n" "from any other non-alphabet bytes in the encoded stream.\n" msgstr "" "\n" "La datenoj estas koditaj kiel priskribas RFC 3548 por la alfabeto 'base64'.\n" "Por malkodado eblas ke krom la bajtoj de la formala base64-alfabeto estu\n" "iuj liniavancoj en la enigaĵo. Uzu «--ignore-garbage» por provi toleri\n" "aliajn ne-alfabetajn signojn en la kodita fluo.\n" #: src/basenc.c:164 #, fuzzy, c-format msgid "" "\n" "The data are encoded as described for the %s alphabet in RFC 4648.\n" "When decoding, the input may contain newlines in addition to the bytes of\n" "the formal %s alphabet. Use --ignore-garbage to attempt to recover\n" "from any other non-alphabet bytes in the encoded stream.\n" msgstr "" "\n" "La datenoj estas koditaj kiel priskribas RFC 3548 por la alfabeto 'base64'.\n" "Por malkodado eblas ke krom la bajtoj de la formala base64-alfabeto estu\n" "iuj liniavancoj en la enigaĵo. Uzu «--ignore-garbage» por provi toleri\n" "aliajn ne-alfabetajn signojn en la kodita fluo.\n" #: src/basenc.c:618 msgid "invalid input (length must be multiple of 4 characters)" msgstr "" #: src/basenc.c:991 src/basenc.c:1036 src/csplit.c:278 src/csplit.c:1469 #: src/fmt.c:502 src/join.c:465 src/shuf.c:233 src/shuf.c:279 src/shuf.c:560 #: src/tac-pipe.c:76 src/tee.c:263 src/tr.c:1611 #, c-format msgid "read error" msgstr "leg-eraro" #: src/basenc.c:1055 msgid "invalid input" msgstr "nevalida enigaĵo" #: src/basenc.c:1106 msgid "invalid wrap size" msgstr "nevalida faldiga grando" #: src/basenc.c:1205 #, fuzzy, c-format #| msgid "missing operand after %s" msgid "missing encoding type" msgstr "mankas argumento post %s" #: src/basenc.c:1243 src/cat.c:799 src/fmt.c:450 msgid "closing standard input" msgstr "fermiĝas ĉefenigujo" #. This is a proper name. See the gettext manual, section Names. #: src/cat.c:48 src/cp.c:47 src/df.c:48 src/du.c:54 src/factor.c:123 #: src/split.c:49 msgid "Torbjorn Granlund" msgstr "Torbjern GRANLUND (Torbjörn Granlund)" #. This is a proper name. See the gettext manual, section Names. #: src/cat.c:49 src/comm.c:38 src/ls.c:132 src/rm.c:42 src/split.c:50 #: src/tee.c:37 src/uniq.c:40 msgid "Richard M. Stallman" msgstr "Riĉard STOLMEN (Richard M. Stallman)" #: src/cat.c:91 src/df.c:1544 src/expand.c:68 src/fold.c:66 src/head.c:110 #: src/ls.c:5396 src/digest.c:403 src/nl.c:179 src/paste.c:434 src/pr.c:2745 #: src/rm.c:133 src/tac.c:132 src/tail.c:262 src/tee.c:87 src/unexpand.c:77 #, c-format msgid "Usage: %s [OPTION]... [FILE]...\n" msgstr "Uzmaniero: %s [OPCIO...] [DOSIERO...]\n" #: src/cat.c:95 #, fuzzy msgid "Concatenate FILE(s) to standard output.\n" msgstr "" "Eligas ordigitan kunmeton de ĉiuj DOSIEROj al ĉefeligujo.\n" "\n" #: src/cat.c:101 #, fuzzy msgid "" "\n" " -A, --show-all equivalent to -vET\n" " -b, --number-nonblank number nonempty output lines, overrides -n\n" " -e equivalent to -vE\n" " -E, --show-ends display $ at end of each line\n" " -n, --number number all output lines\n" " -s, --squeeze-blank suppress repeated empty output lines\n" msgstr "" "Ĉenigas DOSIERO(j)n, aŭ ĉefenigujon, al ĉefeligujo.\n" "\n" " -A, --show-all egalas al opcioj «-vET»\n" " -b, --number-nonblank numerigi nevakajn eligliniojn (nuligas opcion «-n»)\n" " -e egalas al opcioj «-vE»\n" " -E, --show-ends montri «$» je la fino de ĉiu linio\n" " -n, --number numerigi ĉiujn eligliniojn\n" " -s, --squeeze-blank forlasi ripetitajn vakajn eligliniojn\n" #: src/cat.c:110 msgid "" " -t equivalent to -vT\n" " -T, --show-tabs display TAB characters as ^I\n" " -u (ignored)\n" " -v, --show-nonprinting use ^ and M- notation, except for LFD and TAB\n" msgstr "" " -t egalas al opcioj «-vT»\n" " -T, --show-tabs montri ĉiun TAB-signon kiel «^I»\n" " -u (ignorata)\n" " -v, --show-nonprinting uzi «^» kaj «M-» notigon, escepte por LFD kaj TAB\n" #: src/cat.c:118 #, c-format msgid "" "\n" "Examples:\n" " %s f - g Output f's contents, then standard input, then g's contents.\n" " %s Copy standard input to standard output.\n" msgstr "" "\n" "Ekzemploj: \n" " %s f - g Eligas enhavon de f, poste ĉefenigujon, poste enhavon de g.\n" " %s Kopias ĉefenigujon al ĉefeligujo.\n" #: src/cat.c:330 #, c-format msgid "cannot do ioctl on %s" msgstr "ne eblas fari 'ioctl' al %s" #: src/cat.c:667 src/dd.c:2453 src/sort.c:405 src/tail.c:2428 src/tee.c:207 #: src/yes.c:128 #, c-format msgid "standard output" msgstr "ĉefeligujo" #: src/cat.c:728 #, c-format msgid "%s: input file is output file" msgstr "eniga dosiero %s estas la eliga dosiero; ĝi ignoriĝas" #. This is a proper name. See the gettext manual, section Names. #: src/chcon.c:37 src/runcon.c:57 msgid "Russell Coker" msgstr "Rosel KUKER (Russell Coker)" #. This is a proper name. See the gettext manual, section Names. #: src/chcon.c:38 src/chgrp.c:39 src/chmod.c:40 src/chown.c:38 src/cp.c:49 #: src/cut.c:46 src/dirname.c:33 src/du.c:57 src/head.c:48 src/hostid.c:32 #: src/hostname.c:33 src/mktemp.c:36 src/mv.c:44 src/nohup.c:34 src/od.c:40 #: src/pathchk.c:33 src/pwd.c:32 src/rm.c:43 src/sleep.c:34 src/sync.c:33 #: src/tail.c:76 src/tr.c:38 src/true.c:33 msgid "Jim Meyering" msgstr "Ĝim MEJERING (Jim Meyering)" #: src/chcon.c:101 src/runcon.c:201 src/runcon.c:232 #, c-format msgid "failed to create security context: %s" msgstr "malsukcesis krei sekurecan kuntekston: %s" #: src/chcon.c:113 #, c-format msgid "failed to set %s security context component to %s" msgstr "malsukcesis agordi elementon %s de sekureca kunteksto al %s" #: src/chcon.c:157 src/chcon.c:548 src/copy.c:996 src/runcon.c:215 #: src/stat.c:843 #, c-format msgid "failed to get security context of %s" msgstr "malsukcesis eltrovi sekurecan kuntekston de %s" #: src/chcon.c:167 #, c-format msgid "can't apply partial context to unlabeled file %s" msgstr "ne eblas apliki partan kuntekston al sen-etikeda dosiero %s" #: src/chcon.c:191 #, c-format msgid "failed to change context of %s to %s" msgstr "malsukcesis ŝanĝi kuntekston de %s al %s" #: src/chcon.c:256 src/chmod.c:232 src/chown-core.c:324 src/copy.c:797 #: src/du.c:533 src/ls.c:3458 #, c-format msgid "cannot access %s" msgstr "ne eblas atingi %s" #: src/chcon.c:267 src/chmod.c:243 src/chown-core.c:337 src/du.c:513 #, c-format msgid "cannot read directory %s" msgstr "ne eblas legi dosierujon %s" #: src/chcon.c:294 #, c-format msgid "changing security context of %s\n" msgstr "ŝanĝiĝas sekureca kunteksto de %s\n" #: src/chcon.c:328 src/chmod.c:350 src/chown-core.c:538 src/remove.c:602 #, c-format msgid "fts_read failed" msgstr "malsukcesis 'fts_read()'" #: src/chcon.c:339 src/chmod.c:361 src/chown-core.c:550 src/du.c:714 #: src/remove.c:616 #, c-format msgid "fts_close failed" msgstr "malsukcesis 'fts_close()'" #: src/chcon.c:353 #, c-format msgid "" "Usage: %s [OPTION]... CONTEXT FILE...\n" " or: %s [OPTION]... [-u USER] [-r ROLE] [-l RANGE] [-t TYPE] FILE...\n" " or: %s [OPTION]... --reference=RFILE FILE...\n" msgstr "" "Uzmaniero: %s [OPCIO...] KUNTEKSTO DOSIERO...\n" " aŭ: %s [OPCIO...] [-u UZANTO] [-r ROLO] [-l GAMO] [-t TIPO] DOSIERO...\n" " aŭ: %s [OPCIO...] --reference=REFERENCDOSIERO DOSIERO...\n" #: src/chcon.c:359 msgid "" "Change the SELinux security context of each FILE to CONTEXT.\n" "With --reference, change the security context of each FILE to that of RFILE.\n" msgstr "" "Ŝanĝas la SELinuksan sekurecan kuntekston de ĉiu DOSIERO al KUNTEKSTO.\n" "Kun «--reference», ĝi ŝanĝas la sekurecan kuntekston de ĉiu DOSIERO\n" "al tiu de REFERENCDOSIERO.\n" #: src/chcon.c:366 src/chgrp.c:125 src/chown.c:95 msgid "" " --dereference affect the referent of each symbolic link (this is\n" " the default), rather than the symbolic link itself\n" " -h, --no-dereference affect symbolic links instead of any referenced file\n" msgstr "" " --dereference (defaŭlte) efiki la referencatan de ĉiu simbola ligo\n" " -h, --no-dereference efiki simbolan ligon mem anstataŭ kion ĝi indikas\n" #: src/chcon.c:371 msgid "" " -u, --user=USER set user USER in the target security context\n" " -r, --role=ROLE set role ROLE in the target security context\n" " -t, --type=TYPE set type TYPE in the target security context\n" " -l, --range=RANGE set range RANGE in the target security context\n" msgstr "" " -u, --user=UZANTO difini uzanton UZANTO en la cela sekureca kunteksto\n" " -r, --role=ROLO difini rolon ROLO en la cela sekureca kunteksto\n" " -t, --type=TIPO difini tipon TIPO en la cela sekureca kunteksto\n" " -l, --range=GAMO difini gamon GAMO en la cela sekureca kunteksto\n" #: src/chcon.c:377 src/chgrp.c:134 src/chmod.c:391 src/chown.c:111 msgid "" " --no-preserve-root do not treat '/' specially (the default)\n" " --preserve-root fail to operate recursively on '/'\n" msgstr "" " --no-preserve-root ne trakti '/' aparte (la defaŭlto)\n" " --preserve-root rifuzi operacii rikure sur '/'\n" #: src/chcon.c:381 msgid "" " --reference=RFILE use RFILE's security context rather than specifying\n" " a CONTEXT value\n" msgstr "" " --reference=REFERENCDOSIERO\n" " uzi sekurecan kuntekston de REFERENCDOSIERO\n" " anstataŭ la valoron KUNTEKSTO\n" #: src/chcon.c:385 src/chgrp.c:142 src/chown.c:119 msgid " -R, --recursive operate on files and directories recursively\n" msgstr " -R, --recursive operacii rikure pri dosieroj kaj dosierujoj\n" #: src/chcon.c:388 msgid " -v, --verbose output a diagnostic for every file processed\n" msgstr " -v, --verbose eligi mesaĝon por ĉiu dosiero kiu proceziĝis\n" #: src/chcon.c:391 src/chgrp.c:145 src/chown.c:122 msgid "" "\n" "The following options modify how a hierarchy is traversed when the -R\n" "option is also specified. If more than one is specified, only the final\n" "one takes effect.\n" "\n" " -H if a command line argument is a symbolic link\n" " to a directory, traverse it\n" " -L traverse every symbolic link to a directory\n" " encountered\n" " -P do not traverse any symbolic links (default)\n" "\n" msgstr "" "\n" "La sekvaj opcioj modifas la trapason de la hierarkio kiam la opcio «-R»\n" "indikatas. Se pli ol unu el ili indikatas, nur la lasta efikas.\n" "\n" " -H se komandlinia argumento estas simbola ligo al\n" " dosierujo, trapasi ĝin\n" " -L trapasi ĉiun renkontatan simbolan ligon al dosierujo\n" " -P ne trapasi iujn ajn simbolajn ligojn (defaŭlte)\n" "\n" #: src/chcon.c:518 src/chgrp.c:266 src/chown.c:267 msgid "-R --dereference requires either -H or -L" msgstr "'-R --dereference' bezonas aŭ '-H' aŭ '-L'" #: src/chcon.c:524 msgid "-R -h requires -P" msgstr "'-R -h' bezonas '-P'" #: src/chcon.c:539 src/chgrp.c:281 src/chmod.c:532 src/chown.c:282 #: src/comm.c:483 src/csplit.c:1405 src/join.c:1161 src/link.c:78 #: src/mknod.c:178 src/tr.c:1756 #, c-format msgid "missing operand after %s" msgstr "mankas argumento post %s" #: src/chcon.c:563 src/runcon.c:249 #, c-format msgid "invalid context: %s" msgstr "nevalida kunteksto: %s" #: src/chcon.c:569 #, c-format msgid "conflicting security context specifiers given" msgstr "konfliktas la indikoj de sekureca kunteksto" #: src/chcon.c:578 src/chgrp.c:289 src/chgrp.c:307 src/chmod.c:540 #: src/chmod.c:559 src/chown.c:290 src/chown.c:319 src/cp.c:422 src/cp.c:489 #: src/mv.c:99 src/pwd.c:276 src/rm.c:348 src/touch.c:352 #, c-format msgid "failed to get attributes of %s" msgstr "malsukcesis eltrovi atributojn de %s" #: src/chgrp.c:93 #, c-format msgid "invalid group: %s" msgstr "nevalida grupo: %s" #: src/chgrp.c:110 #, c-format msgid "" "Usage: %s [OPTION]... GROUP FILE...\n" " or: %s [OPTION]... --reference=RFILE FILE...\n" msgstr "" "Uzmaniero: %s [OPCIO...] GRUPO DOSIERO...\n" " aŭ: %s [OPCIO...] --reference=REFERENCDOSIERO DOSIERO...\n" #: src/chgrp.c:115 msgid "" "Change the group of each FILE to GROUP.\n" "With --reference, change the group of each FILE to that of RFILE.\n" "\n" msgstr "" "Ŝanĝas la grupon de ĉiu DOSIERO al GRUPO.\n" "Kun «--reference», ŝanĝas la grupon de ĉiu DOSIERO al tiu de REFERENCDOSIERO.\n" "\n" #: src/chgrp.c:120 src/chmod.c:386 src/chown.c:90 msgid "" " -c, --changes like verbose but report only when a change is made\n" " -f, --silent, --quiet suppress most error messages\n" " -v, --verbose output a diagnostic for every file processed\n" msgstr "" " -c, --changes kiel '--verbose', sed nur kiam ŝanĝo okazis\n" " -f, --silent, --quiet forlasi la plejmulton de erarmesaĝoj\n" " -v, --verbose eligi mesaĝon por ĉiu dosiero kiu proceziĝis\n" #: src/chgrp.c:130 src/chown.c:100 msgid "" " (useful only on systems that can change the\n" " ownership of a symlink)\n" msgstr "" " (utilas nur en sistemoj kie eblas ŝanĝi posedanton\n" " de simbola ligo)\n" #: src/chgrp.c:138 msgid "" " --reference=RFILE use RFILE's group rather than specifying a\n" " GROUP value\n" msgstr "" " --reference=REFERENCDOSIERO\n" " uzi la grupon de REFERENCDOSIERO anstataŭ valoron\n" #: src/chgrp.c:160 #, c-format msgid "" "\n" "Examples:\n" " %s staff /u Change the group of /u to \"staff\".\n" " %s -hR staff /u Change the group of /u and subfiles to \"staff\".\n" msgstr "" "\n" "Ekzemploj:\n" " %s teamo /u Ŝanĝas la grupon de /u al \"teamo\".\n" " %s -hR teamo /u Ŝanĝas la grupon de /u kaj ĝiaj subdosieroj al \"teamo\".\n" #: src/chmod.c:134 #, c-format msgid "getting new attributes of %s" msgstr "eltroviĝas novaj atributoj de %s" #: src/chmod.c:159 src/chown-core.c:146 #, c-format msgid "neither symbolic link %s nor referent has been changed\n" msgstr "nek simbola ligo %s nek ĝia referanto estas ŝanĝita\n" #: src/chmod.c:164 #, c-format msgid "%s could not be accessed\n" msgstr "" #: src/chmod.c:184 #, c-format msgid "mode of %s changed from %04lo (%s) to %04lo (%s)\n" msgstr "moduso de %s ŝanĝiĝis de %04lo (%s) al %04lo (%s)\n" #: src/chmod.c:187 #, c-format msgid "failed to change mode of %s from %04lo (%s) to %04lo (%s)\n" msgstr "malsukcesis ŝanĝi moduson de %s de %04lo (%s) al %04lo (%s)\n" #: src/chmod.c:190 #, c-format msgid "mode of %s retained as %04lo (%s)\n" msgstr "moduso de %s restas %04lo (%s)\n" #: src/chmod.c:249 #, c-format msgid "cannot operate on dangling symlink %s" msgstr "ne eblas trakti sencelan simbolan ligon %s" #: src/chmod.c:286 #, c-format msgid "changing permissions of %s" msgstr "ŝanĝiĝas permesoj pri %s" #: src/chmod.c:315 #, c-format msgid "%s: new permissions are %s, not %s" msgstr "%s: novaj permesoj estas %s, ne %s" #: src/chmod.c:375 #, c-format msgid "" "Usage: %s [OPTION]... MODE[,MODE]... FILE...\n" " or: %s [OPTION]... OCTAL-MODE FILE...\n" " or: %s [OPTION]... --reference=RFILE FILE...\n" msgstr "" "Uzmaniero: %s [OPCIO...] MODUSO[,MODUSO...] DOSIERO...\n" " aŭ: %s [OPCIO...] OKUMA_MODUSO DOSIERO...\n" " aŭ: %s [OPCIO...] --reference=REFERENCDOSIERO DOSIERO...\n" #: src/chmod.c:381 msgid "" "Change the mode of each FILE to MODE.\n" "With --reference, change the mode of each FILE to that of RFILE.\n" "\n" msgstr "" "Ŝangas la moduson de ĉiu DOSIERO al MODUSO. Kun opcio «--reference»,\n" "ĝi ŝangas la moduson de ĉiu DOSIERO al tiu de REFERENCDOSIERO.\n" "\n" #: src/chmod.c:395 msgid " --reference=RFILE use RFILE's mode instead of MODE values\n" msgstr " --reference=REFDOS uzi la moduson de REFDOS anstataŭ de MODUSOn\n" #: src/chmod.c:398 msgid " -R, --recursive change files and directories recursively\n" msgstr " -R, --recursive ŝanĝas dosierojn kaj dosierujojn rikure\n" #: src/chmod.c:403 msgid "" "\n" "Each MODE is of the form '[ugoa]*([-+=]([rwxXst]*|[ugo]))+|[-+=][0-7]+'.\n" msgstr "" "\n" "Ĉiu MODUSO estas laŭ la formo «[ugoa]*([-+=]([rwxXst]*|[ugo]))+|[-+=][0-7]+».\n" #: src/chmod.c:517 #, c-format msgid "cannot combine mode and --reference options" msgstr "nekombineblas modusaj argumentoj kaj opcio «--reference»" #: src/chmod.c:548 #, c-format msgid "invalid mode: %s" msgstr "nevalida moduso: %s" #: src/chown-core.c:157 #, c-format msgid "changed ownership of %s from %s to %s\n" msgstr "ŝanĝiĝis posedanto de %s -- de %s al %s\n" #: src/chown-core.c:158 #, c-format msgid "changed group of %s from %s to %s\n" msgstr "ŝanĝiĝis grupo de %s -- de %s al %s\n" #: src/chown-core.c:159 #, c-format msgid "no change to ownership of %s\n" msgstr "ne ŝanĝiĝis posedanto de %s\n" #: src/chown-core.c:164 #, c-format msgid "failed to change ownership of %s from %s to %s\n" msgstr "malsukcesis ŝanĝi posedanton de %s de %s al %s\n" #: src/chown-core.c:165 #, c-format msgid "failed to change group of %s from %s to %s\n" msgstr "malsukcesis ŝanĝi grupon de %s de %s al %s\n" #: src/chown-core.c:166 src/chown-core.c:172 #, c-format msgid "failed to change ownership of %s\n" msgstr "malsukcesis ŝanĝi posedanton de %s\n" #: src/chown-core.c:170 #, c-format msgid "failed to change ownership of %s to %s\n" msgstr "malsukcesis ŝanĝi posedanton de %s al %s\n" #: src/chown-core.c:171 #, c-format msgid "failed to change group of %s to %s\n" msgstr "malsukcesis ŝanĝi grupon de %s al %s\n" #: src/chown-core.c:179 #, c-format msgid "ownership of %s retained as %s\n" msgstr "posedanto de %s restas %s\n" #: src/chown-core.c:180 #, c-format msgid "group of %s retained as %s\n" msgstr "grupo de %s restas %s\n" #: src/chown-core.c:181 #, c-format msgid "ownership of %s retained\n" msgstr "posedanto de %s reteniĝas\n" #: src/chown-core.c:378 #, c-format msgid "cannot dereference %s" msgstr "ne eblas malreferenci %s" #: src/chown-core.c:466 #, c-format msgid "changing ownership of %s" msgstr "ŝanĝiĝas posedanto de %s" #: src/chown-core.c:467 #, c-format msgid "changing group of %s" msgstr "ŝanĝiĝas grupo de %s" #: src/chown.c:80 #, c-format msgid "" "Usage: %s [OPTION]... [OWNER][:[GROUP]] FILE...\n" " or: %s [OPTION]... --reference=RFILE FILE...\n" msgstr "" "Uzmaniero: %s [OPCIO...] [POSEDANTO][:[GRUPO]] DOSIERO...\n" " aŭ: %s [OPCIO...] --reference=REFERENCDOSIERO DOSIERO...\n" #: src/chown.c:85 msgid "" "Change the owner and/or group of each FILE to OWNER and/or GROUP.\n" "With --reference, change the owner and group of each FILE to those of RFILE.\n" "\n" msgstr "" "Ŝanĝas la posedanton kaj/aŭ grupon de ĉiu DOSIERO al POSEDANTO kaj/aŭ GRUPO.\n" "Kun «--reference», ŝanĝas la posedanton kaj grupon de ĉiu DOSIERO al tiuj de\n" "REFERENCDOSIERO.\n" "\n" #: src/chown.c:104 msgid "" " --from=CURRENT_OWNER:CURRENT_GROUP\n" " change the owner and/or group of each file only if\n" " its current owner and/or group match those specified\n" " here. Either may be omitted, in which case a match\n" " is not required for the omitted attribute\n" msgstr "" " --from=NUNA_POSEDANTO:NUNA_GRUPO\n" " ŝanĝi la posedanton kaj/aŭ grupon de ĉiu dosiero nur\n" " se ĝia nuna posedanto kaj/aŭ grupo kongruas kun la ĉi\n" " tie indikataj; la unua aŭ la dua povas esti forlasata,\n" " en kiu kazo kongruo ne bezonas por tiu\n" #: src/chown.c:115 msgid "" " --reference=RFILE use RFILE's owner and group rather than\n" " specifying OWNER:GROUP values\n" msgstr "" " --reference=REFERENCDOSIERO\n" " uzi posedanton kaj grupon de REFERENCDOSIERO\n" #: src/chown.c:137 msgid "" "\n" "Owner is unchanged if missing. Group is unchanged if missing, but changed\n" "to login group if implied by a ':' following a symbolic OWNER.\n" "OWNER and GROUP may be numeric as well as symbolic.\n" msgstr "" "\n" "Posedanto ne ŝanĝiĝas se mankas. Ankaŭ grupo ne ŝanĝiĝas se mankas, sed\n" "ĝi ŝanĝiĝas al la ensaluta grupo se ':' sekvas simbolan POSEDANTOn.\n" "POSEDANTO kaj GRUPO povas esti numerecaj aŭ simbolaj.\n" #: src/chown.c:143 #, c-format msgid "" "\n" "Examples:\n" " %s root /u Change the owner of /u to \"root\".\n" " %s root:staff /u Likewise, but also change its group to \"staff\".\n" " %s -hR root /u Change the owner of /u and subfiles to \"root\".\n" msgstr "" "\n" "Ekzemploj:\n" " %s root /u Ŝanĝas la posedanton de /u al \"root\".\n" " %s root:teamo /u Egale, sed ankaŭ ŝanĝas la grupon al \"teamo\".\n" " %s -hR root /u Ŝanĝas la posedanton de /u kaj subdosieroj al \"root\".\n" #. This is a proper name. See the gettext manual, section Names. #: src/chroot.c:39 msgid "Roland McGrath" msgstr "Roland MEKGRAF (Roland McGrath)" #: src/chroot.c:139 src/install.c:573 #, c-format msgid "invalid group %s" msgstr "nevalida grupo: %s" #: src/chroot.c:154 #, c-format msgid "invalid group list %s" msgstr "nevalida gruplisto: %s" #: src/chroot.c:187 #, c-format msgid "" "Usage: %s [OPTION] NEWROOT [COMMAND [ARG]...]\n" " or: %s OPTION\n" msgstr "" "Uzmaniero: %s [OPCIO] CELDOSIERUJO [KOMANDO [ARGUMENTO...]]\n" " aŭ: %s OPCIO\n" #: src/chroot.c:192 msgid "" "Run COMMAND with root directory set to NEWROOT.\n" "\n" msgstr "" "Rulas KOMANDOn kun CELDOSIERUJO kiel radika dosierujo.\n" "\n" #: src/chroot.c:197 #, fuzzy msgid " --groups=G_LIST specify supplementary groups as g1,g2,..,gN\n" msgstr "" " --userspec=UZANTO:GRUPO uzendaj uzanto kaj grupo (ID aŭ nomo)\n" " --groups=GRUPLISTO agordendaj aldonaj grupoj (indiki kiel «g1,g2,..,gN»)\n" #: src/chroot.c:200 #, fuzzy msgid " --userspec=USER:GROUP specify user and group (ID or name) to use\n" msgstr "" " --userspec=UZANTO:GRUPO uzendaj uzanto kaj grupo (ID aŭ nomo)\n" " --groups=GRUPLISTO agordendaj aldonaj grupoj (indiki kiel «g1,g2,..,gN»)\n" #: src/chroot.c:203 #, c-format msgid " --skip-chdir do not change working directory to %s\n" msgstr "" #: src/chroot.c:209 #, fuzzy #| msgid "" #| "\n" #| "If no command is given, run '${SHELL} -i' (default: '/bin/sh -i').\n" msgid "" "\n" "If no command is given, run '\"$SHELL\" -i' (default: '/bin/sh -i').\n" msgstr "" "\n" "Sen KOMANDO, lanĉiĝas '${SHELL} -i' (defaŭlte: '/bin/sh -i').\n" #: src/chroot.c:288 #, c-format msgid "option --skip-chdir only permitted if NEWROOT is old %s" msgstr "" #: src/chroot.c:331 #, c-format msgid "cannot change root directory to %s" msgstr "ne eblas ŝanĝi radikan dosierujon al %s" #: src/chroot.c:335 msgid "cannot chdir to root directory" msgstr "ne eblas iri al radika dosierujo" #: src/chroot.c:377 #, c-format msgid "no group specified for unknown uid: %d" msgstr "neniu grupo indikitas por nekonata UID-o: %d" #: src/chroot.c:402 msgid "failed to get supplemental groups" msgstr "malsukcesis obteni la aldonajn grupojn" #: src/chroot.c:414 msgid "failed to set supplemental groups" msgstr "malsukcesis agordi aldonajn grupojn" #: src/chroot.c:420 msgid "failed to set group-ID" msgstr "malsukcesis agordi grupnumeron" #: src/chroot.c:423 msgid "failed to set user-ID" msgstr "malsukcesis agordi uzantnumeron" #: src/chroot.c:429 src/nohup.c:222 src/stdbuf.c:392 src/timeout.c:552 #, c-format msgid "failed to run command %s" msgstr "malsukcesis ruli komandon %s" #: src/cksum.c:170 src/wc.c:166 #, fuzzy #| msgid "failed to create pipe" msgid "failed to get cpuid" msgstr "malsukcesis krei dukton" #: src/cksum.c:177 msgid "pclmul support not detected" msgstr "" #: src/cksum.c:182 msgid "using pclmul hardware support" msgstr "" #: src/cksum.c:187 msgid "using generic hardware support" msgstr "" #: src/comm.c:112 src/join.c:192 #, c-format msgid "Usage: %s [OPTION]... FILE1 FILE2\n" msgstr "Uzmaniero: %s [OPCIO...] DOSIERO1 DOSIERO2\n" #: src/comm.c:116 msgid "Compare sorted files FILE1 and FILE2 line by line.\n" msgstr "Komparas ordigitajn dosierojn DOSIERO1 kaj DOSIERO2 po-linie.\n" #: src/comm.c:119 src/join.c:201 msgid "" "\n" "When FILE1 or FILE2 (not both) is -, read standard input.\n" msgstr "" "\n" "Se DOSIERO1 aŭ DOSIERO2 (ne ambaŭ) estas «-», ĉefenigujo legiĝas.\n" #: src/comm.c:123 msgid "" "\n" "With no options, produce three-column output. Column one contains\n" "lines unique to FILE1, column two contains lines unique to FILE2,\n" "and column three contains lines common to both files.\n" msgstr "" "\n" "Kiam sen opcioj, produktas trikolumnan eligon. La unua kolumno entenas\n" "liniojn unikajn al DOSIERO1, la dua kolumno liniojn unikajn al DOSIERO2,\n" "kaj la tria kolumno liniojn komunajn al ambaŭ dosierojn.\n" #: src/comm.c:129 #, fuzzy #| msgid "" #| "\n" #| " -1 suppress column 1 (lines unique to FILE1)\n" #| " -2 suppress column 2 (lines unique to FILE2)\n" #| " -3 suppress column 3 (lines that appear in both files)\n" msgid "" "\n" " -1 suppress column 1 (lines unique to FILE1)\n" " -2 suppress column 2 (lines unique to FILE2)\n" " -3 suppress column 3 (lines that appear in both files)\n" msgstr "" "\n" " -1 forlasi kolumnon 1 (liniojn unikajn al DOSIERO1)\n" " -2 forlasi kolumnon 2 (liniojn unikajn al DOSIERO2)\n" " -3 forlasi kolumnon 3 (liniojn kiuj aperas en ambaŭ dosieroj)\n" #: src/comm.c:135 #, fuzzy #| msgid "" #| "\n" #| " --check-order check that the input is correctly sorted, even\n" #| " if all input lines are pairable\n" #| " --nocheck-order do not check that the input is correctly sorted\n" msgid "" "\n" " --check-order check that the input is correctly sorted, even\n" " if all input lines are pairable\n" " --nocheck-order do not check that the input is correctly sorted\n" msgstr "" "\n" " --check-order kontroli ke la enigo estas ĝuste ordigita, eĉ\n" " se ĉiuj enigaj linioj estas pareblaj\n" " --nocheck-order ne kontroli ke la enigo estas ĝuste ordigita\n" #: src/comm.c:141 #, fuzzy #| msgid " --output-delimiter=STR separate columns with STR\n" msgid " --output-delimiter=STR separate columns with STR\n" msgstr " --output-delimiter=ĈENO disigi kolumnojn kun ĈENO\n" #: src/comm.c:144 #, fuzzy #| msgid " --tag create a BSD-style checksum\n" msgid " --total output a summary\n" msgstr " --tag krei kontrolsumon en BSD-stilo\n" #: src/comm.c:147 #, fuzzy msgid " -z, --zero-terminated line delimiter is NUL, not newline\n" msgstr " -z, --zero-terminated disigi eligon per nulbajtoj anstataŭ per novlinioj\n" #: src/comm.c:152 msgid "" "\n" "Note, comparisons honor the rules specified by 'LC_COLLATE'.\n" msgstr "" "\n" "Notu ke komparoj honoras la regulojn indikatajn de 'LC_COLLATE'.\n" #: src/comm.c:156 #, c-format msgid "" "\n" "Examples:\n" " %s -12 file1 file2 Print only lines present in both file1 and file2.\n" " %s -3 file1 file2 Print lines in file1 not in file2, and vice versa.\n" msgstr "" "\n" "Ekzemploj:\n" " %s -12 dosiero1 dosiero2 Montras nur liniojn kiuj ĉeestas en ambaŭ dosieroj.\n" " %s -3 dosiero1 dosiero2 Montras liniojn kiuj ĉeestas en unu dosiero sed ne\n" " en la alia.\n" #: src/comm.c:238 #, c-format msgid "file %d is not in sorted order" msgstr "dosiero %d ne estas en ordigita sekvo" #: src/comm.c:402 src/du.c:1137 src/ls.c:3094 src/wc.c:990 msgid "total" msgstr "totalo" #: src/comm.c:458 #, fuzzy msgid "multiple output delimiters specified" msgstr "pluraj limigiloj indikatas" #: src/comm.c:496 src/join.c:1195 #, fuzzy #| msgid "file %d is not in sorted order" msgid "input is not in sorted order" msgstr "dosiero %d ne estas en ordigita sekvo" #: src/copy.c:230 src/copy.c:645 src/copy.c:1338 #, c-format msgid "cannot lseek %s" msgstr "ne eblas 'lseek' sur %s" #: src/copy.c:240 src/copy.c:638 #, fuzzy, c-format msgid "error deallocating %s" msgstr "eraro dum legado de %s" #: src/copy.c:351 #, fuzzy, c-format msgid "error copying %s to %s" msgstr "eraro dum legado de %s" #: src/copy.c:370 src/dd.c:1889 src/dd.c:2225 src/du.c:1134 src/head.c:157 #: src/head.c:308 src/head.c:390 src/head.c:587 src/head.c:669 src/head.c:738 #: src/head.c:788 src/head.c:811 src/tail.c:446 src/tail.c:539 src/tail.c:587 #: src/tail.c:680 src/tail.c:807 src/tail.c:855 src/tail.c:892 src/tail.c:2022 #: src/tail.c:2055 src/uniq.c:461 #, c-format msgid "error reading %s" msgstr "eraro dum legado de %s" #: src/copy.c:403 src/dd.c:2288 src/dd.c:2350 src/head.c:185 src/tail.c:420 #, c-format msgid "error writing %s" msgstr "eraro dum skribado de %s" #: src/copy.c:432 #, c-format msgid "overflow reading %s" msgstr "troo dum legado de %s" #: src/copy.c:577 #, c-format msgid "%s: write failed" msgstr "%s: malsukcesis skribo" #: src/copy.c:631 src/copy.c:1401 #, c-format msgid "failed to extend %s" msgstr "malsukcesis etendi %s" #: src/copy.c:878 #, c-format msgid "clearing permissions for %s" msgstr "vakigiĝas permesoj pri %s" #: src/copy.c:913 src/copy.c:2873 src/cp.c:318 #, c-format msgid "failed to preserve ownership for %s" msgstr "malsukcesis konservi posedanton pri %s" #: src/copy.c:939 #, c-format msgid "failed to lookup file %s" msgstr "malsukcesis trovi dosieron %s" #: src/copy.c:944 #, c-format msgid "failed to preserve authorship for %s" msgstr "malsukcesis konservi aŭtorecon pri %s" #: src/copy.c:981 src/cp.c:1214 src/install.c:926 src/mkdir.c:278 #: src/mkfifo.c:149 src/mknod.c:205 #, c-format msgid "failed to set default file creation context to %s" msgstr "malsukcesis agordi defaŭltan dosierkrean kuntekston al %s" #: src/copy.c:1011 #, c-format msgid "failed to set default file creation context for %s" msgstr "malsukcesis agordi defaŭltan dosierkrean kuntekston por %s" #: src/copy.c:1037 #, c-format msgid "failed to set the security context of %s" msgstr "malsukcesis agordi sekurecan kuntekston de %s" #: src/copy.c:1146 src/csplit.c:656 src/du.c:1026 src/fmt.c:441 src/head.c:890 #: src/split.c:1573 src/tail.c:1996 src/wc.c:875 #, c-format msgid "cannot open %s for reading" msgstr "ne eblas malfermi %s por legi" #: src/copy.c:1152 src/copy.c:1304 src/dd.c:1814 src/dd.c:2362 src/dd.c:2497 #: src/head.c:849 src/tail.c:1836 src/tail.c:1899 src/truncate.c:114 #, c-format msgid "cannot fstat %s" msgstr "malsukcesis eltrovi statinformon pri malferma %s" #: src/copy.c:1162 #, c-format msgid "skipping file %s, as it was replaced while being copied" msgstr "ignoratas dosiero %s, ĉar ĝi estis substituata dum kopiado" #: src/copy.c:1201 src/copy.c:2304 src/remove.c:263 src/remove.c:280 #: src/remove.c:406 src/remove.c:432 #, c-format msgid "cannot remove %s" msgstr "ne eblas forigi %s" #: src/copy.c:1206 src/copy.c:1912 src/copy.c:2309 src/remove.c:376 #, c-format msgid "removed %s\n" msgstr "forigiĝis %s\n" #: src/copy.c:1258 #, c-format msgid "not writing through dangling symlink %s" msgstr "ne skribiĝos tra sencela simbola ligo %s" #: src/copy.c:1296 #, c-format msgid "cannot create regular file %s" msgstr "ne eblas krei regulan dosieron %s" #: src/copy.c:1317 #, c-format msgid "failed to clone %s from %s" msgstr "malsukcesis kloni %s el %s" #: src/copy.c:1415 src/copy.c:2947 #, c-format msgid "preserving times for %s" msgstr "konserviĝas tempoj pri %s" #: src/copy.c:1495 src/copy.c:1501 src/head.c:898 src/sync.c:164 #: src/touch.c:168 src/truncate.c:381 #, c-format msgid "failed to close %s" msgstr "malsukcesis malfermi %s" #: src/copy.c:1777 #, c-format msgid "%s: replace %s, overriding mode %04lo (%s)? " msgstr "%s: ĉu anstataŭigi %s, ignorante moduson %04lo (%s)? " #: src/copy.c:1778 #, c-format msgid "%s: unwritable %s (mode %04lo, %s); try anyway? " msgstr "%s: %s ne estas skribebla (moduso %04lo, %s); ĉu provi tamen? " #: src/copy.c:1785 #, c-format msgid "%s: overwrite %s? " msgstr "%s: ĉu anstataŭigi %s? " #: src/copy.c:1879 #, c-format msgid " (backup: %s)" msgstr " (savkopio: %s)" #: src/copy.c:1889 msgid "failed to restore the default file creation context" msgstr "malsukcesis restaŭri defaŭltan dosierkrean kuntekston" #: src/copy.c:1907 #, c-format msgid "cannot create hard link %s to %s" msgstr "ne eblas krei senperan ligon %s al %s" #: src/copy.c:2018 #, c-format msgid "-r not specified; omitting directory %s" msgstr "opcio «-r» ne indikatas; preterpasiĝas dosierujo %s" #: src/copy.c:2019 #, c-format msgid "omitting directory %s" msgstr "preterpasiĝas dosierujo %s" #: src/copy.c:2042 #, c-format msgid "warning: source file %s specified more than once" msgstr "averto: fontdosiero %s indikatas plurfoje" #: src/copy.c:2097 src/ln.c:275 #, c-format msgid "%s and %s are the same file" msgstr "%s kaj %s estas la sama dosiero" #: src/copy.c:2187 #, c-format msgid "cannot overwrite non-directory %s with directory %s" msgstr "ne eblas anstataŭigi nedosierujon %s per dosierujo %s" #: src/copy.c:2205 src/ln.c:246 #, c-format msgid "will not overwrite just-created %s with %s" msgstr "ne anstataŭiĝos ĵuskreita %s per %s" #: src/copy.c:2223 #, c-format msgid "cannot overwrite directory %s with non-directory" msgstr "ne eblas anstataŭigi dosierujon %s per nedosierujo" #: src/copy.c:2237 #, c-format msgid "cannot move directory onto non-directory: %s -> %s" msgstr "ne eblas movi dosierujon al nedosierujo: %s -> %s" #: src/copy.c:2264 #, fuzzy, c-format #| msgid "backing up %s would destroy source; %s not moved" msgid "backing up %s might destroy source; %s not moved" msgstr "fari savkopion de %s detruus fontdosieron; %s ne moviĝis" #: src/copy.c:2265 #, fuzzy, c-format #| msgid "backing up %s would destroy source; %s not copied" msgid "backing up %s might destroy source; %s not copied" msgstr "fari savkopion de %s detruus fontdosieron; %s ne kopiiĝis" #: src/copy.c:2287 src/ln.c:308 #, c-format msgid "cannot backup %s" msgstr "ne eblas krei savkopion de %s" #: src/copy.c:2343 #, c-format msgid "will not copy %s through just-created symlink %s" msgstr "ne kopiiĝos %s tra ĵuskreita simbola ligo %s" #: src/copy.c:2423 #, c-format msgid "cannot copy a directory, %s, into itself, %s" msgstr "ne eblas kopii dosierujon %s al ene de si mem (%s)" #: src/copy.c:2431 #, c-format msgid "warning: source directory %s specified more than once" msgstr "averto: fontdosiero %s indikatas plurfoje" #: src/copy.c:2457 #, c-format msgid "will not create hard link %s to directory %s" msgstr "ne kreiĝos senpera ligo %s al dosierujo %s" #: src/copy.c:2481 #, fuzzy, c-format #| msgid "named file" msgid "renamed " msgstr "nomata dosiero" #: src/copy.c:2519 #, c-format msgid "cannot move %s to a subdirectory of itself, %s" msgstr "ne eblas movi %s al subdosiero de si mem (%s)" #: src/copy.c:2562 #, c-format msgid "cannot move %s to %s" msgstr "ne eblas movi %s al %s" #: src/copy.c:2578 #, c-format msgid "inter-device move failed: %s to %s; unable to remove target" msgstr "malsukcesis movo inter aparatoj: %s al %s; ne eblas forigi celon" #: src/copy.c:2586 #, c-format msgid "copied " msgstr "" #: src/copy.c:2623 #, c-format msgid "cannot copy cyclic symbolic link %s" msgstr "ne eblas kopii ciklan simbolan ligon %s" #: src/copy.c:2685 #, fuzzy, c-format #| msgid "created directory %s" msgid "created directory %s\n" msgstr "kreiĝas dosierujo %s" #: src/copy.c:2747 #, c-format msgid "%s: can make relative symbolic links only in current directory" msgstr "%s: krei relativajn simbolajn ligojn eblas nur en aktuala dosierujo" #: src/copy.c:2757 #, c-format msgid "cannot create symbolic link %s to %s" msgstr "ne eblas krei simbolan ligon %s al %s" #: src/copy.c:2811 src/mkfifo.c:175 #, c-format msgid "cannot create fifo %s" msgstr "ne eblas krei vicmemoron %s" #: src/copy.c:2820 #, c-format msgid "cannot create special file %s" msgstr "ne eblas krei specialan dosieron %s" #: src/copy.c:2831 src/ls.c:3673 src/stat.c:1503 #, c-format msgid "cannot read symbolic link %s" msgstr "ne eblas legi simbolan ligon %s" #: src/copy.c:2857 #, c-format msgid "cannot create symbolic link %s" msgstr "ne eblas krei simbolan ligon %s" #: src/copy.c:2889 #, c-format msgid "%s has unknown file type" msgstr "%s havas nekonatan dosiertipon" #: src/copy.c:3053 src/ln.c:396 #, c-format msgid "cannot un-backup %s" msgstr "ne eblas restaŭri savkopion %s" #: src/copy.c:3057 #, c-format msgid "%s -> %s (unbackup)\n" msgstr "%s -> %s (restaŭro)\n" #. This is a proper name. See the gettext manual, section Names. #: src/coreutils.c:48 msgid "Alex Deymo" msgstr "Aleks DEJMO (Alex Deymo)" #: src/coreutils.c:65 #, c-format msgid "Usage: %s --coreutils-prog=PROGRAM_NAME [PARAMETERS]... \n" msgstr "Uzmaniero: %s --coreutils-prog=PROGRAMO [ARGUMENTOJ] \n" #: src/coreutils.c:68 msgid "" "Execute the PROGRAM_NAME built-in program with the given PARAMETERS.\n" "\n" msgstr "" "Rulas la internan PROGRAMOn kun la indikataj ARGUMENTOJ.\n" "\n" #: src/coreutils.c:86 #, c-format msgid "" "\n" "Use: '%s --coreutils-prog=PROGRAM_NAME --help' for individual program help.\n" msgstr "" "\n" "Uzu '%s --coreutils-prog=PROGRAMNOMO --help' por helpo pri iu programo.\n" #: src/coreutils.c:178 src/coreutils.c:203 #, c-format msgid "unknown program %s" msgstr "nekonata programo %s" #: src/cp.c:148 src/mv.c:292 #, c-format msgid "" "Usage: %s [OPTION]... [-T] SOURCE DEST\n" " or: %s [OPTION]... SOURCE... DIRECTORY\n" " or: %s [OPTION]... -t DIRECTORY SOURCE...\n" msgstr "" "Uzmaniero: %s [OPCIO...] [-T] ORIGINO CELO\n" " aŭ: %s [OPCIO...] ORIGINO... DOSIERUJO\n" " aŭ: %s [OPCIO...] -t DOSIERUJO ORIGINO...\n" #: src/cp.c:154 msgid "Copy SOURCE to DEST, or multiple SOURCE(s) to DIRECTORY.\n" msgstr "" "Kopias ORIGINOn al CELO, aŭ plurajn ORIGINOjn al DOSIERUJO.\n" "\n" #: src/cp.c:160 msgid "" " -a, --archive same as -dR --preserve=all\n" " --attributes-only don't copy the file data, just the attributes\n" " --backup[=CONTROL] make a backup of each existing destination file\n" " -b like --backup but does not accept an argument\n" " --copy-contents copy contents of special files when recursive\n" " -d same as --no-dereference --preserve=links\n" msgstr "" " -a, --archive egalas al «-dR --preserve=all»\n" " --attributes-only ne kopii la dosierdatumojn, nur la atributojn\n" " --backup[=METODO] fari savkopion de ĉiu ekzistanta celdosiero\n" " -b kiel «--backup», sed ne akceptas argumenton\n" " --copy-contents kopii enhavon de specialaj dosieroj kiam rikure\n" " -d egalas al «--no-dereference --preserve=links»\n" #: src/cp.c:169 msgid "" " -f, --force if an existing destination file cannot be\n" " opened, remove it and try again (this option\n" " is ignored when the -n option is also used)\n" " -i, --interactive prompt before overwrite (overrides a previous -n\n" " option)\n" " -H follow command-line symbolic links in SOURCE\n" msgstr "" " -f, --force se ekzistanta celdosiero ne malfermeblas, forigi\n" " ĝin kaj provi denove (ignoriĝas kun opcio «-n»)\n" " -i, --interactive averti antaŭ fari anstataŭigon\n" " (transpasas antaŭan opcion «-n»)\n" " -H sekvi komandliniajn simbolajn ligojn en ORIGINO\n" #: src/cp.c:178 msgid "" " -l, --link hard link files instead of copying\n" " -L, --dereference always follow symbolic links in SOURCE\n" msgstr "" " -l, --link senpere ligi dosierojn anstataŭ kopii ilin\n" " -L, --dereference ĉiam sekvi simbolajn ligojn en ORIGINO\n" #: src/cp.c:182 msgid "" " -n, --no-clobber do not overwrite an existing file (overrides\n" " a previous -i option)\n" " -P, --no-dereference never follow symbolic links in SOURCE\n" msgstr "" " -n, --no-clobber ne anstataŭigi ekzistantan dosieron\n" " (transpasas antaŭan opcion «-i»)\n" " -P, --no-dereference neniam sekvi simbolajn ligojn en ORIGINO\n" #: src/cp.c:187 msgid "" " -p same as --preserve=mode,ownership,timestamps\n" " --preserve[=ATTR_LIST] preserve the specified attributes (default:\n" " mode,ownership,timestamps), if possible\n" " additional attributes: context, links, xattr,\n" " all\n" msgstr "" " -p egalas al «--preserve=mode,ownership,timestamps»\n" " --preserve[=ATRIBUTLISTO] konservi la indikatajn atributojn\n" " (defaŭlte: «mode,ownership,timestamps»),\n" " eblas ankaŭ: «context, links, xattr, all»\n" #: src/cp.c:195 msgid "" " --no-preserve=ATTR_LIST don't preserve the specified attributes\n" " --parents use full source file name under DIRECTORY\n" msgstr "" " --no-preserve=ATRIBUTLISTO ne konservi la indikatajn atributojn\n" " --parents uzi plenan ORIGINOdosieran nomon sub DOSIERUJO\n" #: src/cp.c:199 msgid "" " -R, -r, --recursive copy directories recursively\n" " --reflink[=WHEN] control clone/CoW copies. See below\n" " --remove-destination remove each existing destination file before\n" " attempting to open it (contrast with --force)\n" msgstr "" " -R, --recursive, -r kopii dosierujojn rikure\n" " --reflink[=KIAM] kopii nur skribotajn blokojn (vidu sube)\n" " --remove-destination forigi ĉiun ekzistantan celdosieron antaŭ ol\n" " provi malfermi ĝin (kontraste kun «--force»)\n" #: src/cp.c:205 msgid "" " --sparse=WHEN control creation of sparse files. See below\n" " --strip-trailing-slashes remove any trailing slashes from each SOURCE\n" " argument\n" msgstr "" " --sparse=KIAM stiri kreon de maldensaj dosieroj (vidu sube)\n" " --strip-trailing-slashes forigi ajn vostajn suprenstrekojn de ĉiu ORIGINO\n" #: src/cp.c:210 msgid "" " -s, --symbolic-link make symbolic links instead of copying\n" " -S, --suffix=SUFFIX override the usual backup suffix\n" " -t, --target-directory=DIRECTORY copy all SOURCE arguments into DIRECTORY\n" " -T, --no-target-directory treat DEST as a normal file\n" msgstr "" " -s, --symbolic-link krei simbolajn ligojn anstataŭ kopii la enhavon\n" " -S, --suffix=SUFIKSO uzi ĉi tiun anstataŭ kutiman savkopian sufikson\n" " -t, --target-directory=DOSIERUJO kopii ĉiujn ORIGINOjn al DOSIERUJO\n" " -T, --no-target-directory trakti CELO kiel normala dosiero\n" #: src/cp.c:216 msgid "" " -u, --update copy only when the SOURCE file is newer\n" " than the destination file or when the\n" " destination file is missing\n" " -v, --verbose explain what is being done\n" " -x, --one-file-system stay on this file system\n" msgstr "" " -u, --update kopii nur kiam la ORIGINO estas pli nova ol la\n" " celdosiero aŭ kiam la celdosiero mankas\n" " -v, --verbose montri nomon de ĉiu dosiero antaŭ ol kopii ĝin\n" " -x, --one-file-system resti sur dosiersistemo sur kiu kopiado komencis\n" #: src/cp.c:223 #, fuzzy msgid "" " -Z set SELinux security context of destination\n" " file to default type\n" " --context[=CTX] like -Z, or if CTX is specified then set the\n" " SELinux or SMACK security context to CTX\n" msgstr "" " -Z, --context[=KUNTEKSTO] agordi sekurecan kuntekston de celdosiero al\n" " defaŭlta tipo, aŭ al KUNTEKSTO se ĝi indikatas\n" #: src/cp.c:231 #, fuzzy #| msgid "" #| "\n" #| "By default, sparse SOURCE files are detected by a crude heuristic and the\n" #| "corresponding DEST file is made sparse as well. That is the behavior\n" #| "selected by --sparse=auto. Specify --sparse=always to create a sparse DEST\n" #| "file whenever the SOURCE file contains a long enough sequence of zero bytes.\n" #| "Use --sparse=never to inhibit creation of sparse files.\n" #| "\n" #| "When --reflink[=always] is specified, perform a lightweight copy, where the\n" #| "data blocks are copied only when modified. If this is not possible the copy\n" #| "fails, or if --reflink=auto is specified, fall back to a standard copy.\n" msgid "" "\n" "By default, sparse SOURCE files are detected by a crude heuristic and the\n" "corresponding DEST file is made sparse as well. That is the behavior\n" "selected by --sparse=auto. Specify --sparse=always to create a sparse DEST\n" "file whenever the SOURCE file contains a long enough sequence of zero bytes.\n" "Use --sparse=never to inhibit creation of sparse files.\n" msgstr "" "\n" "Defaŭlte, maldensaj ORIGINOj detektiĝas per kruda heŭristiko kaj la koresponda\n" "CELO-dosiero fariĝas maldensa ankaŭ. Tiu konduto elektiĝas de «--sparse=aŭto».\n" "Indiku «--sparse=always» por ĉiam krei maldensan CELO-dosieron kiam ajn la\n" "ORIGINO enhavas sufiĉe longan sekvencon de nulbajtoj. Uzu «--sparse=never»\n" "por malebligi kreon de maldensaj dosieroj.\n" "\n" "Kiam indikatas «--reflink[=always]», mola kopio fariĝas, en kiu la datumblokoj\n" "estos kopiataj nur kiam ili modifotas. Se mola kopio ne eblas, malsukcesas la\n" "kopio, aŭ (se «--reflink=aŭto» indikatas) normala kopio fariĝas anstataŭe.\n" #: src/cp.c:239 msgid "" "\n" "When --reflink[=always] is specified, perform a lightweight copy, where the\n" "data blocks are copied only when modified. If this is not possible the copy\n" "fails, or if --reflink=auto is specified, fall back to a standard copy.\n" "Use --reflink=never to ensure a standard copy is performed.\n" msgstr "" #: src/cp.c:247 msgid "" "\n" "As a special case, cp makes a backup of SOURCE when the force and backup\n" "options are given and SOURCE and DEST are the same name for an existing,\n" "regular file.\n" msgstr "" "\n" "Specialkaze, «cp» faras savkopion de ORIGINO kiam opcioj «--force» kaj «--backup»\n" "indikatas, kaj ORIGINO kaj CELO estas la sama nomo de ekzistanta normala dosiero.\n" #: src/cp.c:306 #, c-format msgid "failed to preserve times for %s" msgstr "malsukcesis konservi tempojn pri %s" #: src/cp.c:337 #, c-format msgid "failed to preserve permissions for %s" msgstr "malsukcesis konservi permesojn pri %s" #: src/cp.c:473 #, c-format msgid "cannot make directory %s" msgstr "ne eblas krei dosierujon %s" #: src/cp.c:522 src/cp.c:552 #, c-format msgid "%s exists but is not a directory" msgstr "%s ekzistas sed ne estas dosierujo" #: src/cp.c:584 src/cp.c:1091 src/install.c:371 src/install.c:907 src/ln.c:204 #: src/ln.c:231 src/ln.c:543 src/mv.c:160 src/mv.c:393 #, c-format msgid "failed to access %s" msgstr "malsukcesis atingi %s" #: src/cp.c:605 src/install.c:935 src/ln.c:574 src/mv.c:438 src/shred.c:1251 #: src/touch.c:434 src/truncate.c:318 #, c-format msgid "missing file operand" msgstr "mankas dosiera argumento" #: src/cp.c:607 src/install.c:937 src/ln.c:597 src/mv.c:440 #, c-format msgid "missing destination file operand after %s" msgstr "mankas celdosiera argumento post %s" #: src/cp.c:616 src/install.c:946 src/mv.c:449 msgid "cannot combine --target-directory (-t) and --no-target-directory (-T)" msgstr "nekombineblas la opcioj «--target-directory» (-t) kaj «--no-target-directory» (-T)" #: src/cp.c:634 src/cp.c:1094 src/install.c:373 src/install.c:910 #: src/install.c:959 src/ln.c:546 src/mv.c:396 src/mv.c:470 #, c-format msgid "target %s is not a directory" msgstr "cela %s ne estas dosierujo" #: src/cp.c:749 #, c-format msgid "with --parents, the destination must be a directory" msgstr "kun opcio «--parents» la celo devas esti dosierujo" #: src/cp.c:1086 src/install.c:847 src/ln.c:538 src/mv.c:388 msgid "multiple target directories specified" msgstr "pluraj celaj dosierujoj indikatas" #: src/cp.c:1127 src/mkdir.c:242 src/mkfifo.c:116 src/mknod.c:133 src/mv.c:422 #, fuzzy, c-format #| msgid "warning: %s: failed to change context to %s" msgid "warning: ignoring --context" msgstr "averto: %s: malsukcesis ŝanĝi kuntekston al %s" #: src/cp.c:1133 src/install.c:883 #, c-format msgid "warning: ignoring --context; it requires an SELinux-enabled kernel" msgstr "averto: ignoriĝas '--context' (-Z); ĝi bezonas kernon kun SELinux" #: src/cp.c:1154 #, c-format msgid "cannot make both hard and symbolic links" msgstr "ne eblas krei samtempe senperan kaj simbolan ligon" #: src/cp.c:1164 src/mv.c:480 #, c-format msgid "options --backup and --no-clobber are mutually exclusive" msgstr "nekombineblas opcioj '--backup' kaj '--no-clobber'" #: src/cp.c:1170 #, c-format msgid "--reflink can be used only with --sparse=auto" msgstr "eblas uzi opcion '--reflink' nur kune kun '--sparse=auto'" #: src/cp.c:1175 src/install.c:915 src/ln.c:644 src/mv.c:485 msgid "backup type" msgstr "tipo de savkopio" #: src/cp.c:1199 src/install.c:922 msgid "cannot set target context and preserve it" msgstr "maleblas kaj agordi celkuntekston kaj reteni ĝin" #: src/cp.c:1203 msgid "cannot preserve security context without an SELinux-enabled kernel" msgstr "ne eblas konservi sekurecan kuntekston sen SE-Linuksa kerno" #: src/cp.c:1219 msgid "cannot preserve extended attributes, cp is built without xattr support" msgstr "maleblas konservi etenditajn atributojn; 'cp' kompilitis sen subteno por 'xattr'" #. This is a proper name. See the gettext manual, section Names. #: src/csplit.c:45 src/dd.c:46 msgid "Stuart Kemp" msgstr "Stjuŭart KEMP (Stuart Kemp)" #: src/csplit.c:546 msgid "input disappeared" msgstr "enigo malaperis" #: src/csplit.c:677 src/csplit.c:689 #, c-format msgid "%s: line number out of range" msgstr "%s: lininumero estas ekster gamo" #: src/csplit.c:719 #, c-format msgid "%s: %s: line number out of range" msgstr "%s: %s: lininumero estas ekster gamo" #: src/csplit.c:722 src/csplit.c:778 #, c-format msgid " on repetition %s\n" msgstr " ĉe ripeto %s\n" #: src/csplit.c:772 #, c-format msgid "%s: %s: match not found" msgstr "%s: %s: paron ne trovatas" #: src/csplit.c:836 src/csplit.c:876 src/nl.c:372 src/tac.c:286 #, c-format msgid "error in regular expression search" msgstr "eraro en regulesprima serĉo" #: src/csplit.c:1008 src/csplit.c:1055 #, c-format msgid "write error for %s" msgstr "skrib-eraro por %s" #: src/csplit.c:1090 #, c-format msgid "%s: integer expected after delimiter" msgstr "%s: post disigilo atendiĝas entjero" #: src/csplit.c:1107 #, c-format msgid "%s: '}' is required in repeat count" msgstr "%s: '}' nepras en ripeta nombro" # La '}' endas, ĉar %s komencas per '{'. #: src/csplit.c:1118 #, c-format msgid "%s}: integer required between '{' and '}'" msgstr "%s}: entjero nepras inter '{' kaj '}'" #: src/csplit.c:1145 #, c-format msgid "%s: closing delimiter '%c' missing" msgstr "%s: mankas ferma disigilo '%c'" #: src/csplit.c:1162 #, c-format msgid "%s: invalid regular expression: %s" msgstr "%s: nevalida regulesprimo: %s" #: src/csplit.c:1194 #, c-format msgid "%s: invalid pattern" msgstr "%s: nevalida serĉa ŝablono" #: src/csplit.c:1197 #, c-format msgid "%s: line number must be greater than zero" msgstr "%s: lininumero devas esti pli ol nulo" #: src/csplit.c:1202 #, c-format msgid "line number %s is smaller than preceding line number, %s" msgstr "lininumero %s estas pli malgranda ol antaŭa lininumero %s" #: src/csplit.c:1208 #, c-format msgid "warning: line number %s is the same as preceding line number" msgstr "averto: lininumero %s egalas al ĵusantaŭa lininumero" #: src/csplit.c:1286 msgid "missing conversion specifier in suffix" msgstr "mankas konvertindiko en sufikso" #: src/csplit.c:1291 #, c-format msgid "invalid conversion specifier in suffix: %c" msgstr "nevalida konvertindiko en sufikso: %c" #: src/csplit.c:1294 #, c-format msgid "invalid conversion specifier in suffix: \\%.3o" msgstr "nevalida konvertindiko en sufikso: \\%.3o" #: src/csplit.c:1299 #, c-format msgid "invalid flags in conversion specification: %%%c%c" msgstr "nevalidaj flagoj en konvertindiko:: %%%c%c" #: src/csplit.c:1316 #, c-format msgid "too many %% conversion specifications in suffix" msgstr "tro multaj konvertindikoj %% en sufikso" #: src/csplit.c:1330 #, c-format msgid "missing %% conversion specification in suffix" msgstr "mankas konvertindiko %% en sufikso" #: src/csplit.c:1376 src/dd.c:1577 src/nproc.c:105 src/tail.c:2149 msgid "invalid number" msgstr "nevalida numero" #: src/csplit.c:1483 #, c-format msgid "Usage: %s [OPTION]... FILE PATTERN...\n" msgstr "Uzmaniero: %s [OPCIO...] DOSIERO ŜABLONO...\n" #: src/csplit.c:1487 msgid "" "Output pieces of FILE separated by PATTERN(s) to files 'xx00', 'xx01', ...,\n" "and output byte counts of each piece to standard output.\n" msgstr "" "Eligas la pecojn de DOSIERO kiuj disigatas per ŜABLONO(j) al la dosieroj\n" "'xx00', 'xx01', ...; kaj eligas la bajtnombron de ĉiu peco al ĉefeligujo.\n" "\n" #: src/csplit.c:1491 msgid "" "\n" "Read standard input if FILE is -\n" msgstr "" "\n" "Kiam DOSIERO estas «-», ĉefenigujo legiĝas.\n" #: src/csplit.c:1498 #, c-format msgid "" " -b, --suffix-format=FORMAT use sprintf FORMAT instead of %02d\n" " -f, --prefix=PREFIX use PREFIX instead of 'xx'\n" " -k, --keep-files do not remove output files on errors\n" msgstr "" " -b, --suffix-format=ARANĜO uzi ĉi tiun ARANĜOn (de 'sprintf') anstataŭ %02d\n" " -f, --prefix=PREFIKSO uzi ĉi tiun PREFIKSOn anstataŭ 'xx'\n" " -k, --keep-files ne forigi eligajn dosierojn kiam eraro okazas\n" #: src/csplit.c:1503 msgid " --suppress-matched suppress the lines matching PATTERN\n" msgstr " --suppress-matched subpremi la liniojn kiuj kongruas kun ŜABLONO\n" #: src/csplit.c:1506 msgid "" " -n, --digits=DIGITS use specified number of digits instead of 2\n" " -s, --quiet, --silent do not print counts of output file sizes\n" " -z, --elide-empty-files remove empty output files\n" msgstr "" " -n, --digits=NOMBRO uzi ĉi tiun nombron de ciferoj anstataŭ 2\n" " -s, --quiet, --silent ne montri la bajtnombrojn de la eligaj dosieroj\n" " -z, --elide-empty-files forigi vakajn eligajn dosierojn\n" #: src/csplit.c:1513 msgid "" "\n" "Each PATTERN may be:\n" " INTEGER copy up to but not including specified line number\n" " /REGEXP/[OFFSET] copy up to but not including a matching line\n" " %REGEXP%[OFFSET] skip to, but not including a matching line\n" " {INTEGER} repeat the previous pattern specified number of times\n" " {*} repeat the previous pattern as many times as possible\n" "\n" "A line OFFSET is a required '+' or '-' followed by a positive integer.\n" msgstr "" "\n" "Ĉiu ŜABLONO povas esti:\n" " ENTJERO kopii ĝis sed ne inkluzive indikata lininumero\n" " /REGESP/[DEŜOVO] kopii ĝis sed ne inkluzive kongrua linio\n" " %REGESP%[DEŜOVO] transpasi ĝis sed ne inkluzive kongrua linio\n" " {ENTJERO} ripeti la antaŭan ŝablonon je ĉi tiu nombro de fojoj\n" " {*} ripeti la antaŭan ŝablonon kiel eble plej multe\n" "\n" "Linia DEŜOVO estas necesa '+' aŭ '-' kun posta pozitiva entjero.\n" #. This is a proper name. See the gettext manual, section Names. #: src/cut.c:44 src/paste.c:52 msgid "David M. Ihnat" msgstr "David IĤNAT (David M. Ihnat)" #: src/cut.c:146 #, c-format msgid "Usage: %s OPTION... [FILE]...\n" msgstr "Uzmaniero: %s OPCIO... [DOSIERO...]\n" #: src/cut.c:150 msgid "Print selected parts of lines from each FILE to standard output.\n" msgstr "" "Eligas al ĉefeligujo elektitajn partojn de linioj de ĉiu DOSIERO.\n" "\n" #: src/cut.c:157 msgid "" " -b, --bytes=LIST select only these bytes\n" " -c, --characters=LIST select only these characters\n" " -d, --delimiter=DELIM use DELIM instead of TAB for field delimiter\n" msgstr "" " -b, --bytes=LISTO elekti nur ĉi tiujn bajtojn\n" " -c, --characters=LISTO elekti nur ĉi tiujn signojn\n" " -d, --delimiter=SIGNO uzi SIGNOn anstataŭ TAB-on por kampdisigilo\n" #: src/cut.c:162 msgid "" " -f, --fields=LIST select only these fields; also print any line\n" " that contains no delimiter character, unless\n" " the -s option is specified\n" " -n (ignored)\n" msgstr "" " -f, --fields=LISTO elekti nur ĉi tiujn kampojn;\n" " ankaŭ eligi ĉiun linion kiu ne enhavas disigilon,\n" " krom se la opcio «-s» indikatas\n" " -n (ignoriĝas)\n" #: src/cut.c:168 msgid "" " --complement complement the set of selected bytes, characters\n" " or fields\n" msgstr "" " --complement komplementi la aron de elektitaj bajtoj, signoj,\n" " aŭ kampoj\n" #: src/cut.c:172 msgid "" " -s, --only-delimited do not print lines not containing delimiters\n" " --output-delimiter=STRING use STRING as the output delimiter\n" " the default is to use the input delimiter\n" msgstr "" " -s, --only-delimited ne eligi liniojn kiuj ne enhavas disigilojn\n" " --output-delimter=ĈENO uzi tiun ĉi ĈENOn kiel eligan disigilon;\n" " defaŭlte uziĝas la eniga disigilo\n" #: src/cut.c:177 src/head.c:134 src/numfmt.c:944 src/paste.c:450 #: src/tail.c:309 #, fuzzy msgid " -z, --zero-terminated line delimiter is NUL, not newline\n" msgstr " -z, --zero-terminated disigi eligon per nulbajtoj anstataŭ per novlinioj\n" #: src/cut.c:182 msgid "" "\n" "Use one, and only one of -b, -c or -f. Each LIST is made up of one\n" "range, or many ranges separated by commas. Selected input is written\n" "in the same order that it is read, and is written exactly once.\n" msgstr "" "\n" "Uzu unu, kaj nur unu, de «-b», «-c», aŭ «-f». Ĉiu LISTO konsistendas el\n" "unu gamo, aŭ multaj gamoj disigitaj per komoj. Elektita enigo skribiĝas\n" "en la sama ordo en kiu ĝi legiĝas, kaj skribiĝas ekzakte unufoje.\n" #: src/cut.c:188 #, fuzzy msgid "" "Each range is one of:\n" "\n" " N N'th byte, character or field, counted from 1\n" " N- from N'th byte, character or field, to end of line\n" " N-M from N'th to M'th (included) byte, character or field\n" " -M from first to M'th (included) byte, character or field\n" msgstr "" "Ĉiu gamo povas esti unu el:\n" "\n" " N la N-a bajto, signo aŭ kampo, numerata ekde 1\n" " N- de la N-a bajto, signo aŭ kampo, ĝis la fino de la linio\n" " N-M de la N-a al la M-a (inkluzive) bajto, signo aŭ kampo\n" " -M de la unua ĝis la M-a (inkluzive) bajto, signo aŭ kampo\n" "\n" "Sen DOSIERO, aŭ kiam DOSIERO estas «-», ĉefenigujo legiĝas.\n" #: src/cut.c:510 src/cut.c:518 msgid "only one type of list may be specified" msgstr "eblas indiki nur unu tipon de listo" #: src/cut.c:527 src/numfmt.c:1520 msgid "the delimiter must be a single character" msgstr "la disigilo devas esti ununura signo" #: src/cut.c:566 msgid "you must specify a list of bytes, characters, or fields" msgstr "nepras indiki liston de bajtoj, signoj, aŭ kampoj" #: src/cut.c:569 msgid "an input delimiter may be specified only when operating on fields" msgstr "eblas indiki enigan disigilon nur kiam traktante kampojn" #: src/cut.c:573 msgid "" "suppressing non-delimited lines makes sense\n" "\tonly when operating on fields" msgstr "subpremi liniojn sen disigilo eblas nur kiam traktante kampojn" #: src/date.c:130 #, fuzzy, c-format msgid "" "Usage: %s [OPTION]... [+FORMAT]\n" " or: %s [-u|--utc|--universal] [MMDDhhmm[[CC]YY][.ss]]\n" msgstr "" "Uzmaniero: %s [OPCIO...] [+ARANĜO]\n" " aŭ: %s [-u|--utc|--universal] [MMTThhmm[[CC]JJ][.ss]]\n" #: src/date.c:135 msgid "Display the current time in the given FORMAT, or set the system date.\n" msgstr "" #: src/date.c:141 msgid " -d, --date=STRING display time described by STRING, not 'now'\n" msgstr "" #: src/date.c:144 msgid "" " --debug annotate the parsed date,\n" " and warn about questionable usage to stderr\n" msgstr "" #: src/date.c:148 msgid " -f, --file=DATEFILE like --date; once for each line of DATEFILE\n" msgstr "" #: src/date.c:151 msgid "" " -I[FMT], --iso-8601[=FMT] output date/time in ISO 8601 format.\n" " FMT='date' for date only (the default),\n" " 'hours', 'minutes', 'seconds', or 'ns'\n" " for date and time to the indicated precision.\n" " Example: 2006-08-14T02:34:56-06:00\n" msgstr "" #: src/date.c:158 msgid "" " -R, --rfc-email output date and time in RFC 5322 format.\n" " Example: Mon, 14 Aug 2006 02:34:56 -0600\n" msgstr "" #: src/date.c:162 msgid "" " --rfc-3339=FMT output date/time in RFC 3339 format.\n" " FMT='date', 'seconds', or 'ns'\n" " for date and time to the indicated precision.\n" " Example: 2006-08-14 02:34:56-06:00\n" msgstr "" #: src/date.c:168 msgid " -r, --reference=FILE display the last modification time of FILE\n" msgstr "" #: src/date.c:171 msgid "" " -s, --set=STRING set time described by STRING\n" " -u, --utc, --universal print or set Coordinated Universal Time (UTC)\n" msgstr "" #: src/date.c:177 msgid "" "\n" "FORMAT controls the output. Interpreted sequences are:\n" "\n" " %% a literal %\n" " %a locale's abbreviated weekday name (e.g., Sun)\n" msgstr "" #: src/date.c:184 msgid "" " %A locale's full weekday name (e.g., Sunday)\n" " %b locale's abbreviated month name (e.g., Jan)\n" " %B locale's full month name (e.g., January)\n" " %c locale's date and time (e.g., Thu Mar 3 23:05:25 2005)\n" msgstr "" #: src/date.c:190 msgid "" " %C century; like %Y, except omit last two digits (e.g., 20)\n" " %d day of month (e.g., 01)\n" " %D date; same as %m/%d/%y\n" " %e day of month, space padded; same as %_d\n" msgstr "" #: src/date.c:196 msgid "" " %F full date; like %+4Y-%m-%d\n" " %g last two digits of year of ISO week number (see %G)\n" " %G year of ISO week number (see %V); normally useful only with %V\n" msgstr "" #: src/date.c:201 msgid "" " %h same as %b\n" " %H hour (00..23)\n" " %I hour (01..12)\n" " %j day of year (001..366)\n" msgstr "" #: src/date.c:207 msgid "" " %k hour, space padded ( 0..23); same as %_H\n" " %l hour, space padded ( 1..12); same as %_I\n" " %m month (01..12)\n" " %M minute (00..59)\n" msgstr "" #: src/date.c:213 msgid "" " %n a newline\n" " %N nanoseconds (000000000..999999999)\n" " %p locale's equivalent of either AM or PM; blank if not known\n" " %P like %p, but lower case\n" " %q quarter of year (1..4)\n" " %r locale's 12-hour clock time (e.g., 11:11:04 PM)\n" " %R 24-hour hour and minute; same as %H:%M\n" " %s seconds since the Epoch (1970-01-01 00:00 UTC)\n" msgstr "" #: src/date.c:223 msgid "" " %S second (00..60)\n" " %t a tab\n" " %T time; same as %H:%M:%S\n" " %u day of week (1..7); 1 is Monday\n" msgstr "" #: src/date.c:229 msgid "" " %U week number of year, with Sunday as first day of week (00..53)\n" " %V ISO week number, with Monday as first day of week (01..53)\n" " %w day of week (0..6); 0 is Sunday\n" " %W week number of year, with Monday as first day of week (00..53)\n" msgstr "" #: src/date.c:235 msgid "" " %x locale's date representation (e.g., 12/31/99)\n" " %X locale's time representation (e.g., 23:13:48)\n" " %y last two digits of year (00..99)\n" " %Y year\n" msgstr "" #: src/date.c:241 msgid "" " %z +hhmm numeric time zone (e.g., -0400)\n" " %:z +hh:mm numeric time zone (e.g., -04:00)\n" " %::z +hh:mm:ss numeric time zone (e.g., -04:00:00)\n" " %:::z numeric time zone with : to necessary precision (e.g., -04, +05:30)\n" " %Z alphabetic time zone abbreviation (e.g., EDT)\n" "\n" "By default, date pads numeric fields with zeroes.\n" msgstr "" #: src/date.c:250 msgid "" "The following optional flags may follow '%':\n" "\n" " - (hyphen) do not pad the field\n" " _ (underscore) pad with spaces\n" " 0 (zero) pad with zeros\n" " + pad with zeros, and put '+' before future years with >4 digits\n" " ^ use upper case if possible\n" " # use opposite case if possible\n" msgstr "" #: src/date.c:260 msgid "" "\n" "After any flags comes an optional field width, as a decimal number;\n" "then an optional modifier, which is either\n" "E to use the locale's alternate representations if available, or\n" "O to use the locale's alternate numeric symbols if available.\n" msgstr "" #: src/date.c:267 msgid "" "\n" "Examples:\n" "Convert seconds since the Epoch (1970-01-01 UTC) to a date\n" " $ date --date='@2147483647'\n" "\n" "Show the time on the west coast of the US (use tzselect(1) to find TZ)\n" " $ TZ='America/Los_Angeles' date\n" "\n" "Show the local time for 9AM next Friday on the west coast of the US\n" " $ date --date='TZ=\"America/Los_Angeles\" 09:00 next Fri'\n" msgstr "" #: src/date.c:301 src/dd.c:2436 src/head.c:882 src/digest.c:1042 #: src/digest.c:1512 src/od.c:915 src/od.c:1983 src/pr.c:1149 src/pr.c:1350 #: src/pr.c:1473 src/stty.c:1368 src/tac.c:574 src/tail.c:369 src/tee.c:174 #: src/tr.c:1911 src/tsort.c:536 src/wc.c:361 msgid "standard input" msgstr "ĉefenigujo" #: src/date.c:330 src/date.c:558 #, c-format msgid "invalid date %s" msgstr "nevalida dato %s" #: src/date.c:444 src/date.c:478 msgid "multiple output formats specified" msgstr "pluraj eligaj aranĝoj indikatas" #: src/date.c:456 #, c-format msgid "the options to specify dates for printing are mutually exclusive" msgstr "nekombineblas la diversaj opcioj por indiki eligotaj datoj" #: src/date.c:463 #, c-format msgid "the options to print and set the time may not be used together" msgstr "nekombineblas la opcioj por eligi kaj por agordi tempon" #: src/date.c:484 #, c-format msgid "" "the argument %s lacks a leading '+';\n" "when using an option to specify date(s), any non-option\n" "argument must be a format string beginning with '+'" msgstr "" "argumento %s ne havas komencan '+';\n" "kiam opcio por indiki dato(j)n uzatas, iu ajn neopcia\n" "argumento devas esti aranĝa ĉeno kiu komencas per '+'" #: src/date.c:566 #, c-format msgid "cannot set date" msgstr "ne eblas agordi daton" #: src/date.c:588 #, fuzzy, c-format #| msgid "no input from %s" msgid "output format: %s" msgstr "neniu enigo el %s" #: src/date.c:603 src/du.c:389 #, c-format msgid "time %s is out of range" msgstr "tempo %s estas ekster gamo" #. This is a proper name. See the gettext manual, section Names. #: src/dd.c:44 src/factor.c:122 src/rm.c:40 src/tail.c:73 src/touch.c:42 #: src/wc.c:53 msgid "Paul Rubin" msgstr "Paŭl RUBIN (Paul Rubin)" #: src/dd.c:562 #, fuzzy, c-format msgid "" "Usage: %s [OPERAND]...\n" " or: %s OPTION\n" msgstr "" "Uzmaniero: %s [ARGUMENTO...]\n" " aŭ: %s OPCIO\n" #: src/dd.c:567 msgid "" "Copy a file, converting and formatting according to the operands.\n" "\n" " bs=BYTES read and write up to BYTES bytes at a time (default: 512);\n" " overrides ibs and obs\n" " cbs=BYTES convert BYTES bytes at a time\n" " conv=CONVS convert the file as per the comma separated symbol list\n" " count=N copy only N input blocks\n" " ibs=BYTES read up to BYTES bytes at a time (default: 512)\n" msgstr "" #: src/dd.c:577 msgid "" " if=FILE read from FILE instead of stdin\n" " iflag=FLAGS read as per the comma separated symbol list\n" " obs=BYTES write BYTES bytes at a time (default: 512)\n" " of=FILE write to FILE instead of stdout\n" " oflag=FLAGS write as per the comma separated symbol list\n" " seek=N skip N obs-sized blocks at start of output\n" " skip=N skip N ibs-sized blocks at start of input\n" " status=LEVEL The LEVEL of information to print to stderr;\n" " 'none' suppresses everything but error messages,\n" " 'noxfer' suppresses the final transfer statistics,\n" " 'progress' shows periodic transfer statistics\n" msgstr "" #: src/dd.c:590 #, fuzzy msgid "" "\n" "N and BYTES may be followed by the following multiplicative suffixes:\n" "c=1, w=2, b=512, kB=1000, K=1024, MB=1000*1000, M=1024*1024, xM=M,\n" "GB=1000*1000*1000, G=1024*1024*1024, and so on for T, P, E, Z, Y.\n" "Binary prefixes can be used, too: KiB=K, MiB=M, and so on.\n" "\n" "Each CONV symbol may be:\n" "\n" msgstr "" "\n" "NOMBRO povas havi obligilan sufikson:\n" "b = 512, kB = 1000, K = 1024, MB = 1000*1000, M = 1024*1024,\n" "GB = 1000*1000*1000, G = 1024*1024*1024, ktp por T, P, E, Z, Y.\n" #: src/dd.c:600 msgid "" " ascii from EBCDIC to ASCII\n" " ebcdic from ASCII to EBCDIC\n" " ibm from ASCII to alternate EBCDIC\n" " block pad newline-terminated records with spaces to cbs-size\n" " unblock replace trailing spaces in cbs-size records with newline\n" " lcase change upper case to lower case\n" " ucase change lower case to upper case\n" " sparse try to seek rather than write all-NUL output blocks\n" " swab swap every pair of input bytes\n" " sync pad every input block with NULs to ibs-size; when used\n" " with block or unblock, pad with spaces rather than NULs\n" msgstr "" #: src/dd.c:613 msgid "" " excl fail if the output file already exists\n" " nocreat do not create the output file\n" " notrunc do not truncate the output file\n" " noerror continue after read errors\n" " fdatasync physically write output file data before finishing\n" " fsync likewise, but also write metadata\n" msgstr "" #: src/dd.c:621 msgid "" "\n" "Each FLAG symbol may be:\n" "\n" " append append mode (makes sense only for output; conv=notrunc suggested)\n" msgstr "" #: src/dd.c:628 msgid " cio use concurrent I/O for data\n" msgstr "" #: src/dd.c:630 msgid " direct use direct I/O for data\n" msgstr "" #: src/dd.c:632 msgid " directory fail unless a directory\n" msgstr "" #: src/dd.c:634 msgid " dsync use synchronized I/O for data\n" msgstr "" #: src/dd.c:636 msgid " sync likewise, but also for metadata\n" msgstr "" #: src/dd.c:637 msgid " fullblock accumulate full blocks of input (iflag only)\n" msgstr "" #: src/dd.c:640 msgid " nonblock use non-blocking I/O\n" msgstr "" #: src/dd.c:642 msgid " noatime do not update access time\n" msgstr "" #: src/dd.c:645 msgid " nocache Request to drop cache. See also oflag=sync\n" msgstr "" #: src/dd.c:649 msgid " noctty do not assign controlling terminal from file\n" msgstr "" #: src/dd.c:652 msgid " nofollow do not follow symlinks\n" msgstr "" #: src/dd.c:654 msgid " nolinks fail if multiply-linked\n" msgstr "" #: src/dd.c:656 msgid " binary use binary I/O for data\n" msgstr "" #: src/dd.c:658 msgid " text use text I/O for data\n" msgstr "" #: src/dd.c:660 msgid " count_bytes treat 'count=N' as a byte count (iflag only)\n" msgstr "" #: src/dd.c:663 msgid " skip_bytes treat 'skip=N' as a byte count (iflag only)\n" msgstr "" #: src/dd.c:666 msgid " seek_bytes treat 'seek=N' as a byte count (oflag only)\n" msgstr "" #: src/dd.c:670 #, c-format msgid "" "\n" "Sending a %s signal to a running 'dd' process makes it\n" "print I/O statistics to standard error and then resume copying.\n" "\n" "Options are:\n" "\n" msgstr "" #: src/dd.c:706 #, c-format msgid "memory exhausted by input buffer of size % bytes (%s)" msgstr "mankas sufiĉa memoro por eniga bufro de % bajtoj (%s)" #: src/dd.c:734 #, c-format msgid "memory exhausted by output buffer of size % bytes (%s)" msgstr "mankas sufiĉa memoro por eliga bufro de % bajtoj (%s)" #: src/dd.c:805 src/du.c:401 msgid "Infinity" msgstr "senfino" #: src/dd.c:824 #, fuzzy, c-format #| msgid "% byte copied, %g s, %s/s" #| msgid_plural "% bytes copied, %g s, %s/s" msgid "% byte copied, %s, %s" msgid_plural "% bytes copied, %s, %s" msgstr[0] "% bajto kopiiĝis en %.1f sekundoj -- %s/s" msgstr[1] "% bajtoj kopiiĝis en %.1f sekundoj -- %s/s" #: src/dd.c:830 #, fuzzy, c-format #| msgid "% bytes (%s) copied, %g s, %s/s" msgid "% bytes (%s) copied, %s, %s" msgstr "% bajtoj kopiiĝis (%s) en %.1f sekundoj -- %s/s" #: src/dd.c:833 #, fuzzy, c-format #| msgid "% bytes (%s, %s) copied, %g s, %s/s" msgid "% bytes (%s, %s) copied, %s, %s" msgstr "% bajtoj kopiiĝis (%s = %s) en %.1f sekundoj -- %s/s" #: src/dd.c:865 #, c-format msgid "" "%+% records in\n" "%+% records out\n" msgstr "" "%+% rikordoj eniĝis\n" "%+% rikordoj eliĝis\n" #: src/dd.c:871 #, c-format msgid "% truncated record\n" msgid_plural "% truncated records\n" msgstr[0] "% trunkita rikordo\n" msgstr[1] "% trunkitaj rikordoj\n" #: src/dd.c:980 #, c-format msgid "closing input file %s" msgstr "fermiĝas eniga dosiero %s" #: src/dd.c:987 #, c-format msgid "closing output file %s" msgstr "fermiĝas eliga dosiero %s" #: src/dd.c:1221 #, c-format msgid "failed to turn off O_DIRECT: %s" msgstr "malsukcesis malŝalti O_DIRECT: %s" #: src/dd.c:1296 src/dd.c:2163 #, c-format msgid "writing to %s" msgstr "skribiĝas al %s" #: src/dd.c:1466 #, c-format msgid "warning: %s is a zero multiplier; use %s if that is intended" msgstr "" #: src/dd.c:1504 src/dd.c:1565 #, c-format msgid "unrecognized operand %s" msgstr "ne rekonatas argumento %s" #: src/dd.c:1516 msgid "invalid conversion" msgstr "nevalida konverto" #: src/dd.c:1519 src/dd.c:1608 msgid "invalid input flag" msgstr "nevalida enigflago" #: src/dd.c:1522 src/dd.c:1602 src/dd.c:1614 msgid "invalid output flag" msgstr "nevalida eligflago" #: src/dd.c:1525 msgid "invalid status level" msgstr "nevalida argumento de 'status'" #: src/dd.c:1660 msgid "cannot combine any two of {ascii,ebcdic,ibm}" msgstr "ne eblas kombini iujn ajn el {ascii,ebcdic,ibm}" #: src/dd.c:1662 msgid "cannot combine block and unblock" msgstr "ne eblas kombini 'block' kaj 'unblock'" #: src/dd.c:1664 msgid "cannot combine lcase and ucase" msgstr "ne eblas kombini 'lcase' kaj 'ucase'" #: src/dd.c:1666 msgid "cannot combine excl and nocreat" msgstr "ne eblas kombini 'excl' kaj 'nocreat'" #: src/dd.c:1669 msgid "cannot combine direct and nocache" msgstr "ne eblas kombini 'direct' kaj 'nocache'" #: src/dd.c:1861 #, c-format msgid "%s: cannot skip" msgstr "%s: ne eblas transsalti" #: src/dd.c:1863 src/dd.c:1894 src/dd.c:1955 #, c-format msgid "%s: cannot seek" msgstr "%s: 'seek' ne eblas" #: src/dd.c:1935 #, c-format msgid "offset overflow while reading file %s" msgstr "pozicio trograndiĝis dum legado de dosiero %s" #: src/dd.c:1947 #, c-format msgid "warning: invalid file offset after failed read" msgstr "averto: nevalida dosiera pozicio post malsukcesa lego" #: src/dd.c:1951 #, c-format msgid "cannot work around kernel bug after all" msgstr "tamen rezultas ke maleblas preterpasi kern-eraron" #: src/dd.c:2090 #, c-format msgid "setting flags for %s" msgstr "agordiĝas flagoj pri %s" #: src/dd.c:2144 #, c-format msgid "%s: cannot skip to specified offset" msgstr "%s: ne eblas salti al indikata pozicio" #: src/dd.c:2373 #, c-format msgid "failed to truncate to % bytes in output file %s" msgstr "malsukcesis trunki al % bajtoj en eliga dosiero %s" #: src/dd.c:2386 #, c-format msgid "fdatasync failed for %s" msgstr "malsukcesis 'fdatasync' por %s" #: src/dd.c:2394 #, c-format msgid "fsync failed for %s" msgstr "malsukcesis 'fsync' por %s" #: src/dd.c:2442 src/dd.c:2472 src/nohup.c:157 src/nohup.c:159 #, c-format msgid "failed to open %s" msgstr "malsukcesis malfermi %s" #: src/dd.c:2482 #, c-format msgid "offset too large: cannot truncate to a length of seek=% (%lu-byte) blocks" msgstr "pozicio estas tro granda: ne eblas trunki al longeco de seek=% (%lu-bajtaj) blokoj" #: src/dd.c:2503 #, c-format msgid "failed to truncate to % bytes in output file %s" msgstr "malsukcesis trunki al % bajtoj en eliga dosiero %s" #: src/dd.c:2520 src/dd.c:2526 #, c-format msgid "failed to discard cache for: %s" msgstr "malsukcesis forĵeti kaŝmemoron por %s" #. This is a proper name. See the gettext manual, section Names. #: src/df.c:50 src/du.c:56 src/expr.c:55 src/kill.c:34 src/pathchk.c:31 #: src/shuf.c:41 src/sleep.c:35 src/sort.c:68 msgid "Paul Eggert" msgstr "Paŭl EGERT (Paul Eggert)" #: src/df.c:183 msgid "Filesystem" msgstr "Dosiersistemo" #: src/df.c:186 msgid "Type" msgstr "Tipo" #: src/df.c:189 src/df.c:625 msgid "blocks" msgstr "blokoj" #: src/df.c:192 msgid "Used" msgstr "Uzata" #: src/df.c:195 msgid "Available" msgstr "Liberaj" #: src/df.c:198 msgid "Use%" msgstr "Uza%" #: src/df.c:201 msgid "Inodes" msgstr "I-nodoj" #: src/df.c:204 msgid "IUsed" msgstr "I-uzata" #: src/df.c:207 msgid "IFree" msgstr "I-lbr" #: src/df.c:210 msgid "IUse%" msgstr "Iuza%" #: src/df.c:213 msgid "Mounted on" msgstr "Metita sur" # SIGKILL 9 Term Kill signal # Nek kaptebla nek ignorebla (malkiel ABORT) #: src/df.c:216 msgid "File" msgstr "Dosiero" #: src/df.c:465 #, c-format msgid "option --output: field %s unknown" msgstr "je opcio «--output»: kampo %s nekonatas" #: src/df.c:472 #, c-format msgid "option --output: field %s used more than once" msgstr "je opcio «--output»: kampo %s indikatas plurfoje" #: src/df.c:493 src/df.c:532 msgid "Size" msgstr "Grando" #: src/df.c:497 src/df.c:534 msgid "Avail" msgstr "Liber" #: src/df.c:557 msgid "Capacity" msgstr "Kapacito" #. TRANSLATORS: this is the "1K-blocks" header in "df" output. #. TRANSLATORS: this is the "1024-blocks" header in "df -P". #: src/df.c:628 src/df.c:637 #, c-format msgid "%s-%s" msgstr "" #: src/df.c:1376 #, c-format msgid "cannot access %s: over-mounted by another device" msgstr "ne eblas atingi %s: ĝi supermetiĝis per alia aparato" #: src/df.c:1545 msgid "" "Show information about the file system on which each FILE resides,\n" "or all file systems by default.\n" msgstr "" "Montras informon pri dosiersistemo en kiu loĝas ĉiu indikata DOSIERO,\n" "aŭ defaŭlte pri ĉiuj dosiersistemoj.\n" "\n" #. TRANSLATORS: The thousands and decimal separators are best #. adjusted to an appropriate default for your locale. #: src/df.c:1554 #, fuzzy msgid "" " -a, --all include pseudo, duplicate, inaccessible file systems\n" " -B, --block-size=SIZE scale sizes by SIZE before printing them; e.g.,\n" " '-BM' prints sizes in units of 1,048,576 bytes;\n" " see SIZE format below\n" " -h, --human-readable print sizes in powers of 1024 (e.g., 1023M)\n" " -H, --si print sizes in powers of 1000 (e.g., 1.1G)\n" msgstr "" " -a, --all inkluzivi virtualajn dosiersistemojn\n" " -B, --block-size=NOMBRO skali grandojn per NOMBRO antaŭ eligi ilin;\n" " '-BM' ekzemple elmetas grandojn en unuoj de\n" " 1048576 bajtoj; vidu ankaŭ sube\n" " --total eligi grandan totalon\n" " -h, --human-readable eligi grandojn en potencoj de 1024 (ekzemple: 234M)\n" " -H, --si eligi grandojn en potencoj de 1000 (ekzemple: 245M)\n" #: src/df.c:1562 msgid "" " -i, --inodes list inode information instead of block usage\n" " -k like --block-size=1K\n" " -l, --local limit listing to local file systems\n" " --no-sync do not invoke sync before getting usage info (default)\n" msgstr "" " -i, --inodes listigi informon pri indeksnodoj anstataŭ pri blokuzado\n" " -k kiel '--block-size=1K'\n" " -l, --local limigi listadon al lokaj dosiersistemoj\n" " --no-sync ne voki 'sync' antaŭ kapti diskuzad-informojn (defaŭlto)\n" #: src/df.c:1569 #, fuzzy msgid "" " --output[=FIELD_LIST] use the output format defined by FIELD_LIST,\n" " or print all fields if FIELD_LIST is omitted.\n" " -P, --portability use the POSIX output format\n" " --sync invoke sync before getting usage info\n" msgstr "" " --output[=KAMPLISTO] uzi elig-aranĝon difinita per KAMPLISTO,\n" " aŭ montri ĉiujn kampojn se KAMPLISTO mankas\n" " -P, --portability uzi la POSIX-an eligan aranĝon\n" " --sync voki 'sync' antaŭ kapti diskuzad-informojn\n" " -t, --type=TIPO nur listigi dosiersistemojn de ĉi tiu TIPO\n" " -T, --print-type eligi tipo de dosiersistemo\n" " -x, --exclude-type=TIPO ne listigi dosiersistemojn de ĉi tiu TIPO\n" " -v (ignoriĝas)\n" #: src/df.c:1575 msgid "" " --total elide all entries insignificant to available space,\n" " and produce a grand total\n" msgstr "" #: src/df.c:1579 #, fuzzy msgid "" " -t, --type=TYPE limit listing to file systems of type TYPE\n" " -T, --print-type print file system type\n" " -x, --exclude-type=TYPE limit listing to file systems not of type TYPE\n" " -v (ignored)\n" msgstr "" " --output[=KAMPLISTO] uzi elig-aranĝon difinita per KAMPLISTO,\n" " aŭ montri ĉiujn kampojn se KAMPLISTO mankas\n" " -P, --portability uzi la POSIX-an eligan aranĝon\n" " --sync voki 'sync' antaŭ kapti diskuzad-informojn\n" " -t, --type=TIPO nur listigi dosiersistemojn de ĉi tiu TIPO\n" " -T, --print-type eligi tipo de dosiersistemo\n" " -x, --exclude-type=TIPO ne listigi dosiersistemojn de ĉi tiu TIPO\n" " -v (ignoriĝas)\n" #: src/df.c:1589 msgid "" "\n" "FIELD_LIST is a comma-separated list of columns to be included. Valid\n" "field names are: 'source', 'fstype', 'itotal', 'iused', 'iavail', 'ipcent',\n" "'size', 'used', 'avail', 'pcent', 'file' and 'target' (see info page).\n" msgstr "" "\n" "KAMPLISTO estas komodisigita listo de montrendaj kolumnoj. Validaj kampnomoj\n" "estas: 'source', 'fstype', 'itotal', 'iused', 'iavail', 'ipcent', 'size',\n" "'used', 'avail', 'pcent', 'file' kaj 'target' (vidu manlibron kun «info df»).\n" #: src/df.c:1626 #, c-format msgid "options %s and %s are mutually exclusive" msgstr "nekombineblas opcioj '%s' kaj '%s'" #: src/df.c:1776 #, c-format msgid "file system type %s both selected and excluded" msgstr "dosiersistema tipo %s estas ambaŭ elektita kaj ekskluzivita" #: src/df.c:1829 msgid "Warning: " msgstr "Averto: " #: src/df.c:1831 src/stat.c:954 msgid "cannot read table of mounted file systems" msgstr "ne eblas legi tabelon de surmetitaj dosiersistemoj" #: src/df.c:1868 msgid "no file systems processed" msgstr "neniu dosiersistemo pritraktatas" #. This is a proper name. See the gettext manual, section Names. #: src/dircolors.c:36 msgid "H. Peter Anvin" msgstr "Piter ANVIN (H. Peter Anvin)" #: src/dircolors.c:99 msgid "" "Output commands to set the LS_COLORS environment variable.\n" "\n" "Determine format of output:\n" " -b, --sh, --bourne-shell output Bourne shell code to set LS_COLORS\n" " -c, --csh, --c-shell output C shell code to set LS_COLORS\n" " -p, --print-database output defaults\n" msgstr "" "Eligas komandojn por agordi la ĉirkaŭaĵan variablon 'LS_COLORS'.\n" "\n" " -b, --sh, --bourne-shell eligi Bourne-ŝelan kodon por starigi 'LS_COLORS'\n" " -c, --csh, --c-shell eligi C-ŝelan kodon por starigi 'LS_COLORS'\n" " -p, --print-database eligi la defaŭltojn\n" #: src/dircolors.c:109 msgid "" "\n" "If FILE is specified, read it to determine which colors to use for which\n" "file types and extensions. Otherwise, a precompiled database is used.\n" "For details on the format of these files, run 'dircolors --print-database'.\n" msgstr "" "\n" "Se DOSIERO indikatas, ĝi legiĝas por decidi kiujn kolorojn uzi por kiuj\n" "dosiertipoj kaj dosierfinaĵoj. Alie, antaŭkompilita datumbazo uzatas.\n" "Por detaloj pri la aranĝo de tiuj dosieroj, lanĉu 'dircolors --print-database'.\n" #: src/dircolors.c:287 #, c-format msgid "%s:%lu: invalid line; missing second token" msgstr "%s:%lu: nevalida linio; mankas dua simbolo" #: src/dircolors.c:359 #, c-format msgid "%s:%lu: unrecognized keyword %s" msgstr "%s:%lu: nerekoniĝas ŝlosilvorto %s" #: src/dircolors.c:360 msgid "" msgstr "" #: src/dircolors.c:441 #, c-format msgid "" "the options to output dircolors' internal database and\n" "to select a shell syntax are mutually exclusive" msgstr "" "nekombineblas la opcio por eligi la internan datumbazon kun\n" "iu opcio kiu elektas ŝelan sintakson" #: src/dircolors.c:451 msgid "file operands cannot be combined with --print-database (-p)" msgstr "nekombineblas dosieraj argumentoj kun opcio '--print-database' (-p)" #: src/dircolors.c:474 msgid "no SHELL environment variable, and no shell type option given" msgstr "ĉirkaŭaĵa variablo SHELL ne ekzistas, kaj neniu ŝelsintaksa opcio indikatas" #: src/dirname.c:50 #, c-format msgid "Usage: %s [OPTION] NAME...\n" msgstr "Uzmaniero: %s [OPCIO] NOMO...\n" #: src/dirname.c:54 msgid "" "Output each NAME with its last non-slash component and trailing slashes\n" "removed; if NAME contains no /'s, output '.' (meaning the current directory).\n" "\n" msgstr "" "Montras ĉiun NOMOn sen sia lasta nestreka ero kaj sen finaj suprenstrekoj;\n" "se NOMO ne enhavas suprenstreko, eligiĝas «.» (indikanta la nuna dosierujo).\n" #: src/dirname.c:59 msgid " -z, --zero end each output line with NUL, not newline\n" msgstr " -z, --zero disigi eligon per nulbajtoj anstataŭ per novlinioj\n" #: src/dirname.c:64 #, c-format msgid "" "\n" "Examples:\n" " %s /usr/bin/ -> \"/usr\"\n" " %s dir1/str dir2/str -> \"dir1\" followed by \"dir2\"\n" " %s stdio.h -> \".\"\n" msgstr "" "\n" "Ekzemploj:\n" " %s /usr/bin/ -> «/usr»\n" " %s ujo1/ĉeno ujo2/ĉeno -> «ujo1» kaj poste «ujo2»\n" " %s stdio.h -> «.».\n" #: src/du.c:285 src/sort.c:415 src/wc.c:191 #, c-format msgid "" "Usage: %s [OPTION]... [FILE]...\n" " or: %s [OPTION]... --files0-from=F\n" msgstr "" "Uzmaniero: %s [OPCIO...] [DOSIERO...]\n" " aŭ: %s [OPCIO...] --files0-from=LISTDOSIERO\n" #: src/du.c:289 #, fuzzy msgid "Summarize device usage of the set of FILEs, recursively for directories.\n" msgstr "" "Resumas uzon de disko por ĉiu indikata DOSIERO; rikure por dosierujoj.\n" "\n" #: src/du.c:295 msgid "" " -0, --null end each output line with NUL, not newline\n" " -a, --all write counts for all files, not just directories\n" " --apparent-size print apparent sizes rather than device usage; although\n" " the apparent size is usually smaller, it may be\n" " larger due to holes in ('sparse') files, internal\n" " fragmentation, indirect blocks, and the like\n" msgstr "" #: src/du.c:304 msgid "" " -B, --block-size=SIZE scale sizes by SIZE before printing them; e.g.,\n" " '-BM' prints sizes in units of 1,048,576 bytes;\n" " see SIZE format below\n" " -b, --bytes equivalent to '--apparent-size --block-size=1'\n" " -c, --total produce a grand total\n" " -D, --dereference-args dereference only symlinks that are listed on the\n" " command line\n" " -d, --max-depth=N print the total for a directory (or file, with --all)\n" " only if it is N or fewer levels below the command\n" " line argument; --max-depth=0 is the same as\n" " --summarize\n" msgstr "" #: src/du.c:317 #, fuzzy msgid "" " --files0-from=F summarize device usage of the\n" " NUL-terminated file names specified in file F;\n" " if F is -, then read names from standard input\n" " -H equivalent to --dereference-args (-D)\n" " -h, --human-readable print sizes in human readable format (e.g., 1K 234M 2G)\n" " --inodes list inode usage information instead of block usage\n" msgstr "" " --files0-from=DOS legi la enigon el la dosieroj kiuj indikatas en la\n" " dosiero DOS per NUL-finitaj nomoj; se DOS estas «-»,\n" " la nomoj legiĝas el ĉefenigujo\n" #: src/du.c:326 msgid "" " -k like --block-size=1K\n" " -L, --dereference dereference all symbolic links\n" " -l, --count-links count sizes many times if hard linked\n" " -m like --block-size=1M\n" msgstr "" #: src/du.c:332 msgid "" " -P, --no-dereference don't follow any symbolic links (this is the default)\n" " -S, --separate-dirs for directories do not include size of subdirectories\n" " --si like -h, but use powers of 1000 not 1024\n" " -s, --summarize display only a total for each argument\n" msgstr "" #: src/du.c:338 msgid "" " -t, --threshold=SIZE exclude entries smaller than SIZE if positive,\n" " or entries greater than SIZE if negative\n" " --time show time of the last modification of any file in the\n" " directory, or any of its subdirectories\n" " --time=WORD show time as WORD instead of modification time:\n" " atime, access, use, ctime or status\n" " --time-style=STYLE show times using STYLE, which can be:\n" " full-iso, long-iso, iso, or +FORMAT;\n" " FORMAT is interpreted like in 'date'\n" msgstr "" #: src/du.c:349 msgid "" " -X, --exclude-from=FILE exclude files that match any pattern in FILE\n" " --exclude=PATTERN exclude files that match PATTERN\n" " -x, --one-file-system skip directories on different file systems\n" msgstr "" #: src/du.c:696 #, c-format msgid "fts_read failed: %s" msgstr "malsukcesis 'fts_read()': %s" #: src/du.c:820 #, c-format msgid "invalid maximum depth %s" msgstr "nevalida maksimuma profundo %s" #: src/du.c:849 msgid "invalid --threshold argument '-0'" msgstr "nevalida argumento por opcio «--threshold»: '-0'" #: src/du.c:932 #, c-format msgid "cannot both summarize and show all entries" msgstr "ne eblas ambaŭ resumi kaj montri ĉiujn elementojn" #: src/du.c:939 #, c-format msgid "warning: summarizing is the same as using --max-depth=0" msgstr "averto: resumi egalas al opcio «--max-depth=0»" #: src/du.c:945 #, c-format msgid "warning: summarizing conflicts with --max-depth=%lu" msgstr "averto: resumi konfliktas kun opcio «--max-depth=%lu»" #: src/du.c:956 #, c-format msgid "warning: options --apparent-size and -b are ineffective with --inodes" msgstr "averto: opcioj '--apparent-size' kaj '-b' ne efikas kune kun '--inodes'" #: src/du.c:1021 src/sort.c:4597 src/wc.c:865 msgid "file operands cannot be combined with --files0-from" msgstr "nekombineblas dosieraj argumentoj kun opcio «--files0-from»" #: src/du.c:1088 src/sort.c:4618 src/wc.c:943 #, c-format msgid "when reading file names from stdin, no file name of %s allowed" msgstr "kiam dosiernomoj legatas de ĉefenigujo, ne permesatas dosiernomo %s" #: src/du.c:1105 src/du.c:1113 src/wc.c:956 src/wc.c:964 msgid "invalid zero-length file name" msgstr "nevalida dosiernomo (longo nulas)" #. This is a proper name. See the gettext manual, section Names. #: src/echo.c:27 msgid "Brian Fox" msgstr "Brajen FOKS (Brian Fox)" #. This is a proper name. See the gettext manual, section Names. #: src/echo.c:28 msgid "Chet Ramey" msgstr "Ĉet REMI (Chet Ramey)" #: src/echo.c:42 #, c-format msgid "" "Usage: %s [SHORT-OPTION]... [STRING]...\n" " or: %s LONG-OPTION\n" msgstr "" "Uzmaniero: %s [MALLONGA_OPCIO...] [ĈENO...]\n" " aŭ: %s LONGA_OPCIO\n" #: src/echo.c:46 msgid "" "Echo the STRING(s) to standard output.\n" "\n" " -n do not output the trailing newline\n" msgstr "" "Eligi la indikata(j)n ĈENO(j)n al ĉefeligujo.\n" "\n" " -n ne eligi la finan linifinon\n" #: src/echo.c:52 msgid "" " -e enable interpretation of backslash escapes (default)\n" " -E disable interpretation of backslash escapes\n" msgstr "" " -e ebligi interpretadon de malsuprenstrekaj eskapoj (defaŭlto)\n" " -E malebligi interpretadon de malsuprenstrekaj eskapoj\n" #: src/echo.c:55 msgid "" " -e enable interpretation of backslash escapes\n" " -E disable interpretation of backslash escapes (default)\n" msgstr "" " -e ebligi interpretadon de malsuprenstrekaj eskapoj\n" " -E malebligi interpretadon de malsuprenstrekaj eskapoj (defaŭlto)\n" #: src/echo.c:61 msgid "" "\n" "If -e is in effect, the following sequences are recognized:\n" "\n" msgstr "" "\n" "Se opcio '-e' efikas, la subaj eskapsekvencoj rekoniĝas:\n" "\n" #: src/echo.c:66 src/printf.c:110 msgid "" " \\\\ backslash\n" " \\a alert (BEL)\n" " \\b backspace\n" " \\c produce no further output\n" " \\e escape\n" " \\f form feed\n" " \\n new line\n" " \\r carriage return\n" " \\t horizontal tab\n" " \\v vertical tab\n" msgstr "" " \\\\ malsuprenstreko\n" " \\a pepo (BEL)\n" " \\b retropaŝo\n" " \\c produkti nenian plian eligon\n" " \\e eskapo\n" " \\f paĝavanco\n" " \\n liniavanco\n" " \\r ĉaretreiro\n" " \\t horizontala tabo\n" " \\v vertikala tabo\n" #: src/echo.c:78 msgid "" " \\0NNN byte with octal value NNN (1 to 3 digits)\n" " \\xHH byte with hexadecimal value HH (1 to 2 digits)\n" msgstr "" " \\0NNN bajto kun okuma valoro NNN (1 ĝis 3 ciferoj)\n" " \\xHH bajto kun deksesuma valoro HH (1 aŭ 2 ciferoj)\n" #. This is a proper name. See the gettext manual, section Names. #: src/env.c:39 src/printenv.c:45 src/whoami.c:35 msgid "Richard Mlynarik" msgstr "Riĉard MLINARIK (Richard Mlynarik)" #: src/env.c:116 #, c-format msgid "Usage: %s [OPTION]... [-] [NAME=VALUE]... [COMMAND [ARG]...]\n" msgstr "Uzmaniero: %s [OPCIO...] [-] [NOMO=VALORO]... [KOMANDO [ARGUMENTO...]]\n" #: src/env.c:119 msgid "Set each NAME to VALUE in the environment and run COMMAND.\n" msgstr "" "Agordas en la ĉirkaŭaĵo ĉiun NOMOn al VALORO kaj lanĉas KOMANDOn.\n" "\n" #: src/env.c:125 msgid "" " -i, --ignore-environment start with an empty environment\n" " -0, --null end each output line with NUL, not newline\n" " -u, --unset=NAME remove variable from the environment\n" msgstr "" " -i, --ignore-environment komenci kun vaka ĉirkaŭaĵo\n" " -0, --null disigi eligon per nulbajtoj anstataŭ per novlinioj\n" " -u, --unset=NOMO forigi variablon de la ĉirkaŭaĵo\n" #: src/env.c:130 msgid " -C, --chdir=DIR change working directory to DIR\n" msgstr "" #: src/env.c:133 msgid "" " -S, --split-string=S process and split S into separate arguments;\n" " used to pass multiple arguments on shebang lines\n" msgstr "" #: src/env.c:137 msgid " --block-signal[=SIG] block delivery of SIG signal(s) to COMMAND\n" msgstr "" #: src/env.c:140 msgid " --default-signal[=SIG] reset handling of SIG signal(s) to the default\n" msgstr "" #: src/env.c:143 msgid " --ignore-signal[=SIG] set handling of SIG signal(s) to do nothing\n" msgstr "" #: src/env.c:146 msgid " --list-signal-handling list non default signal handling to stderr\n" msgstr "" #: src/env.c:149 #, fuzzy #| msgid " -v, --verbose output a diagnostic for every file processed\n" msgid " -v, --debug print verbose information for each processing step\n" msgstr " -v, --verbose eligi mesaĝon por ĉiu dosiero kiu proceziĝis\n" #: src/env.c:154 msgid "" "\n" "A mere - implies -i. If no COMMAND, print the resulting environment.\n" msgstr "" "\n" "Nura «-» signifas «-i». Sen iu KOMANDO, eligi la rezultan ĉirkaŭaĵon.\n" #: src/env.c:158 #, fuzzy #| msgid "" #| "\n" #| "SIGNAL may be a signal name like 'HUP', or a signal number like '1',\n" #| "or the exit status of a process terminated by a signal.\n" #| "PID is an integer; if negative it identifies a process group.\n" msgid "" "\n" "SIG may be a signal name like 'PIPE', or a signal number like '13'.\n" "Without SIG, all known signals are included. Multiple signals can be\n" "comma-separated.\n" msgstr "" "\n" "SIGNALO povas esti signalnomo kiel 'HUP', signalnumero kiel '1',\n" "aŭ la elirstato de procezo kiu terminiĝis per signalo.\n" "PROCEZNUMERO estas entjero; se negativa, ĝi indikas procezgrupon.\n" #: src/env.c:185 #, c-format msgid "cannot unset %s" msgstr "ne eblas malestigi %s" #: src/env.c:432 msgid "'\\c' must not appear in double-quoted -S string" msgstr "" #: src/env.c:443 #, fuzzy #| msgid "warning: an unescaped backslash at end of string is not portable" msgid "invalid backslash at end of string in -S" msgstr "averto: necitata malsuprenstreko ĉe la fino de signoĉeno ne transporteblas" #: src/env.c:446 #, c-format msgid "invalid sequence '\\%c' in -S" msgstr "" #: src/env.c:460 #, c-format msgid "only ${VARNAME} expansion is supported, error at: %s" msgstr "" #: src/env.c:485 msgid "no terminating quote in -S string" msgstr "" #: src/env.c:570 src/env.c:659 src/operand2sig.c:88 #, c-format msgid "%s: invalid signal" msgstr "%s: nevalida signalo" #: src/env.c:602 #, fuzzy, c-format #| msgid "failed to get groups for user %s" msgid "failed to get signal action for signal %d" msgstr "malsukcesis eltrovi grupojn por uzanto %s" #: src/env.c:610 #, fuzzy, c-format #| msgid "failed to set default creation context for %s" msgid "failed to set signal action for signal %d" msgstr "malsukcesis agordi defaŭltan krean kuntekston por %s" #: src/env.c:682 src/env.c:722 #, fuzzy msgid "failed to get signal process mask" msgstr "malsukcesis agordi novan rolon %s" #: src/env.c:711 #, fuzzy msgid "failed to set signal process mask" msgstr "malsukcesis agordi novan rolon %s" #: src/env.c:813 #, fuzzy, c-format #| msgid "invalid option -- %c" msgid "invalid option -- '%c'" msgstr "nevalida opcio -- %c" #: src/env.c:814 src/env.c:905 #, c-format msgid "use -[v]S to pass options in shebang lines" msgstr "" #: src/env.c:847 #, c-format msgid "cannot set %s" msgstr "ne eblas estigi %s" #: src/env.c:857 #, c-format msgid "cannot specify --null (-0) with command" msgstr "ne eblas indiki opcio '--null' (-0) kune kun komando" #: src/env.c:863 #, c-format msgid "must specify command with --chdir (-C)" msgstr "" #: src/env.c:888 #, fuzzy, c-format #| msgid "cannot change root directory to %s" msgid "cannot change directory to %s" msgstr "ne eblas ŝanĝi radikan dosierujon al %s" #: src/expand-common.c:89 msgid "tabs are too far apart" msgstr "tabaj pozicioj tro malproksimas" #: src/expand-common.c:102 #, c-format msgid "'/' specifier only allowed with the last value" msgstr "" #: src/expand-common.c:119 #, c-format msgid "'+' specifier only allowed with the last value" msgstr "" #: src/expand-common.c:171 #, c-format msgid "'/' specifier not at start of number: %s" msgstr "" #: src/expand-common.c:182 #, c-format msgid "'+' specifier not at start of number: %s" msgstr "" #: src/expand-common.c:203 #, c-format msgid "tab stop is too large %s" msgstr "taba pozicio %s estas tro granda" #: src/expand-common.c:211 #, c-format msgid "tab size contains invalid character(s): %s" msgstr "taba pozicio enhavas nevalida(j)n signo(j)n: %s" #: src/expand-common.c:243 msgid "tab size cannot be 0" msgstr "taba pozicio ne povas esti nulo" #: src/expand-common.c:245 msgid "tab sizes must be ascending" msgstr "tabaj pozicioj devas kreski" #: src/expand-common.c:250 #, fuzzy #| msgid "--group is mutually exclusive with -c/-d/-D/-u" msgid "'/' specifier is mutually exclusive with '+'" msgstr "nekombineblas opcio «--group» kun «-c», «-d», «-D», kaj «-u»" #: src/expand-common.c:389 #, fuzzy #| msgid " -t, --tabs=LIST use comma separated list of explicit tab positions\n" msgid " -t, --tabs=LIST use comma separated list of tab positions.\n" msgstr " -t, --tabs=LISTO uzi komadisigatan LISTOn de tabpozicioj\n" #: src/expand-common.c:392 msgid "" " The last specified position can be prefixed with '/'\n" " to specify a tab size to use after the last\n" " explicitly specified tab stop. Also a prefix of '+'\n" " can be used to align remaining tab stops relative to\n" " the last specified tab stop instead of the first column\n" msgstr "" #: src/expand.c:72 #, fuzzy msgid "Convert tabs in each FILE to spaces, writing to standard output.\n" msgstr "" "Konvertas tabojn en ĉiu DOSIERO al spacetoj, skribante al ĉefeligujo.\n" "Sen DOSIERO, aŭ kiam DOSIERO estas «-», ĉefenigujo legiĝas.\n" #: src/expand.c:79 #, fuzzy #| msgid "" #| " -i, --initial do not convert tabs after non blanks\n" #| " -t, --tabs=NUMBER have tabs NUMBER characters apart, not 8\n" msgid "" " -i, --initial do not convert tabs after non blanks\n" " -t, --tabs=N have tabs N characters apart, not 8\n" msgstr "" " -i, --initial ne konverti tabojn post ne-blankspacoj\n" " -t, --tabs=NOMBRO meti tabojn dise je NOMBRO anstataŭ 8 pozicioj\n" #: src/expand.c:145 src/expand.c:164 src/unexpand.c:180 src/unexpand.c:225 msgid "input line is too long" msgstr "eniga linio tro longas" #. This is a proper name. See the gettext manual, section Names. #: src/expr.c:53 src/ln.c:51 src/mv.c:42 src/tee.c:36 msgid "Mike Parker" msgstr "Majk PARKER (Mike Parker)" #. This is a proper name. See the gettext manual, section Names. #: src/expr.c:54 src/groups.c:37 msgid "James Youngman" msgstr "Ĝejmz JONGMAN (James Youngman)" #: src/expr.c:247 #, c-format msgid "" "Usage: %s EXPRESSION\n" " or: %s OPTION\n" msgstr "" "Uzmaniero: %s ESPRIMO\n" " aŭ: %s OPCIO\n" #: src/expr.c:255 msgid "" "\n" "Print the value of EXPRESSION to standard output. A blank line below\n" "separates increasing precedence groups. EXPRESSION may be:\n" "\n" " ARG1 | ARG2 ARG1 if it is neither null nor 0, otherwise ARG2\n" "\n" " ARG1 & ARG2 ARG1 if neither argument is null or 0, otherwise 0\n" msgstr "" "\n" "Eligas la valoron de ESPRIMO al ĉefeligujo.\n" "\n" "(Sube vaka linio disigas kreskantajn antaŭecajn grupojn.)\n" "ESPRIMO povas esti:\n" "\n" " ARG1 | ARG2 ARG1 se ĝi estas nek vaka nek nulo, alie ARG2\n" "\n" " ARG1 & ARG2 ARG1 se nek ARG1 kaj ARG2 estas vaka aŭ nulo, alie nulo\n" #: src/expr.c:264 msgid "" "\n" " ARG1 < ARG2 ARG1 is less than ARG2\n" " ARG1 <= ARG2 ARG1 is less than or equal to ARG2\n" " ARG1 = ARG2 ARG1 is equal to ARG2\n" " ARG1 != ARG2 ARG1 is unequal to ARG2\n" " ARG1 >= ARG2 ARG1 is greater than or equal to ARG2\n" " ARG1 > ARG2 ARG1 is greater than ARG2\n" msgstr "" "\n" " ARG1 < ARG2 ARG1 estas malpli ol ARG2\n" " ARG1 <= ARG2 ARG1 estas malpli aŭ egalas al ARG2\n" " ARG1 = ARG2 ARG1 egalas al ARG2\n" " ARG1 != ARG2 ARG1 ne egalas al ARG2\n" " ARG1 >= ARG2 ARG1 estas pli ol aŭ egalas al ARG2\n" " ARG1 > ARG2 ARG1 estas pli ol ARG2\n" #: src/expr.c:273 msgid "" "\n" " ARG1 + ARG2 arithmetic sum of ARG1 and ARG2\n" " ARG1 - ARG2 arithmetic difference of ARG1 and ARG2\n" msgstr "" "\n" " ARG1 + ARG2 aritmetika sumo de ARG1 kaj ARG2\n" " ARG1 - ARG2 aritmetika diferenco de ARG1 kaj ARG2\n" #: src/expr.c:280 #, no-c-format msgid "" "\n" " ARG1 * ARG2 arithmetic product of ARG1 and ARG2\n" " ARG1 / ARG2 arithmetic quotient of ARG1 divided by ARG2\n" " ARG1 % ARG2 arithmetic remainder of ARG1 divided by ARG2\n" msgstr "" "\n" " ARG1 * ARG2 aritmetika produkto de ARG1 kaj ARG2\n" " ARG1 / ARG2 aritmetika kvociento de ARG1 dividita per ARG2\n" " ARG1 % ARG2 aritmetika resto de ARG1 dividita per ARG2\n" #: src/expr.c:286 msgid "" "\n" " STRING : REGEXP anchored pattern match of REGEXP in STRING\n" "\n" " match STRING REGEXP same as STRING : REGEXP\n" " substr STRING POS LENGTH substring of STRING, POS counted from 1\n" " index STRING CHARS index in STRING where any CHARS is found, or 0\n" " length STRING length of STRING\n" msgstr "" "\n" " ĈENO : REGULESPRIMO ankrita ŝablona kongruo de REGULESPRIMO en ĈENO\n" "\n" " match ĈENO REGULESPRIMO same kiel 'ĈENO : REGULESPRIMO'\n" " substr ĈENO POZICIO LONGO subĉeno de ĈENO (POZICIO nombriĝas ekde 1)\n" " index ĈENO SIGNOJ pozicio en ĈENO kie ĉi tiuj SIGNOJ troviĝas, alie 0\n" " length ĈENO longo de ĈENO\n" #: src/expr.c:295 msgid "" " + TOKEN interpret TOKEN as a string, even if it is a\n" " keyword like 'match' or an operator like '/'\n" "\n" " ( EXPRESSION ) value of EXPRESSION\n" msgstr "" " + ĴETONO interpreti ĴETONOn kiel ĉeno, eĉ se ĝi estas\n" " ŝlosilvorto kiel 'match' aŭ operacio kiel '/'\n" "\n" " ( ESPRIMO ) valoro de ESPRIMO\n" #: src/expr.c:301 msgid "" "\n" "Beware that many operators need to be escaped or quoted for shells.\n" "Comparisons are arithmetic if both ARGs are numbers, else lexicographical.\n" "Pattern matches return the string matched between \\( and \\) or null; if\n" "\\( and \\) are not used, they return the number of characters matched or 0.\n" msgstr "" "\n" "Notu ke ŝeloj ofte bezonas citilojn aŭ eskapsignon por iuj operacisimboloj.\n" "Se kaj ARG1 kaj ARG2 estas nombroj, oni komparas nombre, alie leksikografie.\n" "Ŝablona rekono liveras la ĉenon kongruan al parentezo inter \\( kaj \\), aŭ\n" "malplenan ĉenon. Se oni ne indikas \\( kaj \\), ŝablona rekono liveras la\n" "nombron de kongruaj signoj, aŭ 0.\n" #: src/expr.c:308 msgid "" "\n" "Exit status is 0 if EXPRESSION is neither null nor 0, 1 if EXPRESSION is null\n" "or 0, 2 if EXPRESSION is syntactically invalid, and 3 if an error occurred.\n" msgstr "" "\n" "Elirstato estas 0 se ESPRIMO estas nek vaka nek nulo, 1 se ESPRIMO estas\n" "vaka aŭ nulo, 2 se ESPRIMO estas sintakse nevalida, kaj 3 se eraro okazis.\n" #: src/expr.c:355 #, c-format msgid "syntax error: unexpected argument %s" msgstr "" #: src/expr.c:558 #, fuzzy, c-format #| msgid "missing argument after %s" msgid "syntax error: missing argument after %s" msgstr "mankas argumento post %s" #: src/expr.c:646 src/ptx.c:288 msgid "error in regular expression matcher" msgstr "eraro en regulesprima serĉo" #: src/expr.c:674 #, c-format msgid "syntax error: expecting ')' after %s" msgstr "" #: src/expr.c:677 #, c-format msgid "syntax error: expecting ')' instead of %s" msgstr "" #: src/expr.c:683 #, fuzzy #| msgid "%s: unary operator expected" msgid "syntax error: unexpected ')'" msgstr "unuloka operacisigno atendatas, %s trovitas" #: src/expr.c:829 src/expr.c:866 msgid "non-integer argument" msgstr "argumento estas ne-entjera" #: src/expr.c:831 src/truncate.c:278 msgid "division by zero" msgstr "divido per nulo" #: src/expr.c:925 src/sort.c:2118 #, c-format msgid "set LC_ALL='C' to work around the problem" msgstr "Agordu LC_ALL='C' por eviti la problemon." #: src/expr.c:927 #, c-format msgid "the strings compared were %s and %s" msgstr "la komparitaj ĉenoj estis %s kaj %s" #. This is a proper name. See the gettext manual, section Names. #: src/factor.c:124 msgid "Niels Moller" msgstr "Nils MOLER (Niels Moller)" #: src/factor.c:1263 src/factor.c:1363 src/factor.c:1438 #, fuzzy, c-format msgid "Lucas prime test failure. This should not happen" msgstr "Malsukcesis ... Ĉi tiu ne devus okazi." #: src/factor.c:2089 msgid "squfof queue overflow" msgstr "troo en atendovico de «SQUFOF»" #: src/factor.c:2500 #, c-format msgid "%s is not a valid positive integer" msgstr "%s ne estas valida pozitiva entjero" #: src/factor.c:2535 #, c-format msgid "" "Usage: %s [NUMBER]...\n" " or: %s OPTION\n" msgstr "" "Uzmaniero: %s [ENTJERO...]\n" " aŭ: %s OPCIO\n" #: src/factor.c:2540 msgid "" "Print the prime factors of each specified integer NUMBER. If none\n" "are specified on the command line, read them from standard input.\n" "\n" msgstr "" "Eligas la primajn faktorojn de ĉiu indikata ENTJERO. Se neniu\n" "indikatas sur la komandlinio, ili legiĝas de ĉefenigujo.\n" #: src/find-mount-point.c:40 #, c-format msgid "cannot get current directory" msgstr "ne eblas eltrovi aktualan dosierujon" #: src/find-mount-point.c:50 src/find-mount-point.c:64 #: src/find-mount-point.c:92 #, c-format msgid "cannot change to directory %s" msgstr "ne eblas ŝanĝi al dosierujo %s" #: src/find-mount-point.c:70 #, c-format msgid "cannot stat current directory (now %s)" msgstr "malsukcesis eltrovi statinformon pri aktuala dosierujo (nun %s)" #. This is a proper name. See the gettext manual, section Names. #: src/fmt.c:38 msgid "Ross Paterson" msgstr "Ros PETERSON (Ross Paterson)" #: src/fmt.c:270 #, c-format msgid "Usage: %s [-WIDTH] [OPTION]... [FILE]...\n" msgstr "Uzmaniero: %s [-LARĜO] [OPCIO...] [DOSIERO...]\n" #: src/fmt.c:271 msgid "" "Reformat each paragraph in the FILE(s), writing to standard output.\n" "The option -WIDTH is an abbreviated form of --width=DIGITS.\n" msgstr "" "Rearanĝas ĉiun paragrafon el la DOSIERO(j), skribante al ĉefeligujo.\n" "La opcio '-CIFEROJ' estas mallongigo de '--width=CIFEROJ'.\n" "\n" #: src/fmt.c:279 msgid "" " -c, --crown-margin preserve indentation of first two lines\n" " -p, --prefix=STRING reformat only lines beginning with STRING,\n" " reattaching the prefix to reformatted lines\n" " -s, --split-only split long lines, but do not refill\n" msgstr "" " -c, --crown-margin konservi krommarĝenon de la unuaj du linioj\n" " -p, --prefix=ĈENO rearanĝi nur liniojn kiuj komencas per ĈENO,\n" " realdonante tiun prefikson al rearanĝitaj linioj\n" " -s, --split-only fendi longajn liniojn, sed ne rerektigi ilin\n" #: src/fmt.c:288 #, no-c-format msgid "" " -t, --tagged-paragraph indentation of first line different from second\n" " -u, --uniform-spacing one space between words, two after sentences\n" " -w, --width=WIDTH maximum line width (default of 75 columns)\n" " -g, --goal=WIDTH goal width (default of 93% of width)\n" msgstr "" " -t, --tagged-paragraph krommarĝeno de unua linio malsamas al tiu de dua\n" " -u, --uniform-spacing unu spaceto inter vortoj, du post frazoj\n" " -w, --width=LARĜO maksimuma larĝo de linio (defaŭlto: 75 kolumnoj)\n" " -g, --goal=LARĜO cela larĝo (defaŭlto: 93% de maksimuma larĝo)\n" #: src/fmt.c:356 #, c-format msgid "" "invalid option -- %c; -WIDTH is recognized only when it is the first\n" "option; use -w N instead" msgstr "" "nevalida opcio %c;\n" "opcio '-LARĜO' nur rekoniĝas kiam ĝi esta la unua;\n" "alie uzu '-w LARĜO' anstataŭe" #: src/fmt.c:400 src/fmt.c:407 #, fuzzy msgid "invalid width" msgstr "nevalida larĝo: %s" #: src/fold.c:70 #, fuzzy msgid "Wrap input lines in each FILE, writing to standard output.\n" msgstr "" "Faldas enigliniojn el ĉiu DOSIERO, skribante al ĉefeligujo.\n" "Sen DOSIERO, aŭ kiam DOSIERO estas «-», ĉefenigujo legiĝas.\n" #: src/fold.c:77 msgid "" " -b, --bytes count bytes rather than columns\n" " -s, --spaces break at spaces\n" " -w, --width=WIDTH use WIDTH columns instead of 80\n" msgstr "" " -b, --bytes kalkuli bajtojn anstataŭ de kolumnojn\n" " -s, --spaces faldi nur je spacetoj (kiam eblas)\n" " -w, --width=NOMBRO uzi ĉi tiun larĝon anstataŭ de 80\n" #: src/fold.c:284 src/pr.c:841 #, fuzzy msgid "invalid number of columns" msgstr "nevalida nombro da kolumnoj: %s" #. This is a proper name. See the gettext manual, section Names. #: src/getlimits.c:30 src/digest.c:141 src/realpath.c:33 src/stdbuf.c:38 #: src/timeout.c:78 src/truncate.c:38 msgid "Padraig Brady" msgstr "Porig BREDI (Pádraig Brady)" #: src/getlimits.c:66 #, c-format msgid "Usage: %s\n" msgstr "Uzmaniero: %s\n" #: src/getlimits.c:70 msgid "" "Output platform dependent limits in a format useful for shell scripts.\n" "\n" msgstr "" "Eligas platformdependajn limojn en aranĝo kiu utilas por ŝelskriptoj.\n" "\n" #: src/group-list.c:68 src/id.c:401 #, c-format msgid "failed to get groups for user %s" msgstr "malsukcesis eltrovi grupojn por uzanto %s" #: src/group-list.c:73 src/id.c:404 #, c-format msgid "failed to get groups for the current process" msgstr "malsukcesis eltrovi grupojn por aktuala procezo" #: src/group-list.c:113 #, c-format msgid "cannot find name for group ID %lu" msgstr "ne eblas eltrovi nomon por grupa ID-o %lu" #: src/groups.c:54 #, c-format msgid "Usage: %s [OPTION]... [USERNAME]...\n" msgstr "Uzmaniero: %s [OPCIO...] [UZANTNOMO...]\n" #: src/groups.c:55 msgid "" "Print group memberships for each USERNAME or, if no USERNAME is specified, for\n" "the current process (which may differ if the groups database has changed).\n" msgstr "" "Montras grupajn anecojn por ĉiu indikata UZANTNOMO aŭ, sen iu UZANTNOMO, por\n" "la aktuala procezo. (Tiuj povas malsami se la grupa datumbazo ŝanĝiĝis.)\n" #: src/groups.c:106 src/id.c:289 msgid "cannot get real UID" msgstr "malsukcesis eltrovi realan UID-on" #: src/groups.c:111 src/id.c:297 msgid "cannot get effective GID" msgstr "malsukcesis eltrovi efektivan GID-on" #: src/groups.c:116 src/id.c:302 msgid "cannot get real GID" msgstr "malsukcesis eltrovi realan GID-on" #: src/groups.c:130 src/id.c:255 #, c-format msgid "%s: no such user" msgstr "%s: tiu uzanto ne ekzistas" #: src/head.c:114 #, fuzzy, c-format msgid "" "Print the first %d lines of each FILE to standard output.\n" "With more than one FILE, precede each with a header giving the file name.\n" msgstr "" "Eligas la unuajn dek liniojn de ĉiu DOSIERO al ĉefeligujo.\n" "\n" "Kun pli ol unu DOSIERO, antaŭ ĉiu meti ĉapon kiu montras la dosiernomon.\n" "Sen DOSIERO, aŭ kiam DOSIERO estas «-», ĉefenigujo legiĝas.\n" "\n" #: src/head.c:122 #, fuzzy, c-format msgid "" " -c, --bytes=[-]NUM print the first NUM bytes of each file;\n" " with the leading '-', print all but the last\n" " NUM bytes of each file\n" " -n, --lines=[-]NUM print the first NUM lines instead of the first %d;\n" " with the leading '-', print all but the last\n" " NUM lines of each file\n" msgstr "" " -c, --bytes=[-]NOMBRO eligi la unuajn NOMBRO bajtojn de ĉiu dosiero;\n" " kun komenca «-», eligi ĉiujn bajtojn krom la\n" " NOMBRO lastaj\n" " -n, --lines=[-]NOMBRO eligi la unuajn NOMBRO liniojn anstataŭ unuajn dek;\n" " kun komenca «-», eligi ĉiujn liniojn krom la\n" " NOMBRO lastaj\n" #: src/head.c:130 msgid "" " -q, --quiet, --silent never print headers giving file names\n" " -v, --verbose always print headers giving file names\n" msgstr "" " -q, --quiet, --silent neniam eligi ĉapojn kun dosiernomoj\n" " -v, --verbose ĉiam eligi ĉapojn kun dosiernomoj\n" #: src/head.c:139 #, fuzzy msgid "" "\n" "NUM may have a multiplier suffix:\n" "b 512, kB 1000, K 1024, MB 1000*1000, M 1024*1024,\n" "GB 1000*1000*1000, G 1024*1024*1024, and so on for T, P, E, Z, Y.\n" "Binary prefixes can be used, too: KiB=K, MiB=M, and so on.\n" msgstr "" "\n" "NOMBRO povas havi obligilan sufikson:\n" "b = 512, kB = 1000, K = 1024, MB = 1000*1000, M = 1024*1024,\n" "GB = 1000*1000*1000, G = 1024*1024*1024, ktp por T, P, E, Z, Y.\n" #: src/head.c:160 #, c-format msgid "%s: file has shrunk too much" msgstr "%s: dosiero ŝrumpis troe" #: src/head.c:232 src/tail.c:489 #, c-format msgid "%s: cannot seek to offset %s" msgstr "%s: ne eblas fari 'seek' al pozicio %s" #: src/head.c:233 src/tail.c:493 #, c-format msgid "%s: cannot seek to relative offset %s" msgstr "%s: ne eblas fari 'seek' al relativa pozicio %s" #: src/head.c:275 #, c-format msgid "%s: number of bytes is too large" msgstr "%s: nombro de bajtoj tro grandas" #: src/head.c:914 src/split.c:1371 src/split.c:1538 src/tail.c:2190 msgid "invalid number of lines" msgstr "nevalida nombro da linioj" #: src/head.c:915 src/head.c:1079 src/split.c:1363 src/split.c:1379 #: src/tail.c:2191 msgid "invalid number of bytes" msgstr "nevalida nombro da bajtoj" #: src/head.c:1005 src/head.c:1067 #, c-format msgid "invalid trailing option -- %c" msgstr "nevalida opcio je la fino -- %c" #: src/hostid.c:41 #, c-format msgid "" "Usage: %s [OPTION]\n" "Print the numeric identifier (in hexadecimal) for the current host.\n" "\n" msgstr "" "Uzmaniero: %s [OPCIO]\n" "\n" "Montras la numeran (deksesuman) identigilon de la aktuala komputilo.\n" "\n" #: src/hostname.c:56 #, c-format msgid "" "Usage: %s [NAME]\n" " or: %s OPTION\n" "Print or set the hostname of the current system.\n" "\n" msgstr "" "Uzmaniero: %s [NOMO]\n" " aŭ: %s OPCIO\n" "\n" "Montras aŭ agordas la retnomon de la aktuala komputilo.\n" "\n" #: src/hostname.c:93 #, c-format msgid "cannot set name to %s" msgstr "ne eblas agordi nomon al %s" #: src/hostname.c:97 msgid "cannot set hostname; this system lacks the functionality" msgstr "maleblas agordi retnomon; ĉi tiu sistemo ne povas fari tion" #: src/hostname.c:105 msgid "cannot determine hostname" msgstr "ne eblas eltrovi la retnomon" #. This is a proper name. See the gettext manual, section Names. #: src/id.c:41 src/touch.c:43 msgid "Arnold Robbins" msgstr "Arnold ROBINS (Arnold Robbins)" #: src/id.c:96 src/pinky.c:489 #, c-format msgid "Usage: %s [OPTION]... [USER]...\n" msgstr "Uzmaniero: %s [OPCIO...] [UZANTO...]\n" #: src/id.c:97 #, fuzzy #| msgid "" #| "Print user and group information for the specified USER,\n" #| "or (when USER omitted) for the current user.\n" #| "\n" msgid "" "Print user and group information for each specified USER,\n" "or (when USER omitted) for the current user.\n" "\n" msgstr "" "Montras uzantan kaj grupan informon por la indikata UZANTNOMO,\n" "aŭ (kiam UZANTNOMO ne indikatas) por la aktuala uzanto.\n" "\n" # XXX 0 byte anstataŭ NUL char #: src/id.c:102 msgid "" " -a ignore, for compatibility with other versions\n" " -Z, --context print only the security context of the process\n" " -g, --group print only the effective group ID\n" " -G, --groups print all group IDs\n" " -n, --name print a name instead of a number, for -ugG\n" " -r, --real print the real ID instead of the effective ID, with -ugG\n" " -u, --user print only the effective user ID\n" " -z, --zero delimit entries with NUL characters, not whitespace;\n" " not permitted in default format\n" msgstr "" " -a ignoriĝas (rekoniĝas nur por kongrui kun aliaj versioj)\n" " -Z, --context eligi nur la sekurecan kuntekston de la procezo\n" " -g, --group eligi nur la efektivan grupan ID-on\n" " -G, --groups eligi ĉiujn grupajn ID-ojn\n" " -n, --name eligi nomon anstataŭ nombron (kun '-ugG')\n" " -r, --real eligi la veran ID anstataŭ la efektivan ID-on (kun '-ugG')\n" " -u, --user eligi nur la efektivan uzantan ID-on\n" " -z, --zero disigi erojn per nulbajto anstataŭ per blankspaco;\n" " opcio ne permasatas en defaŭlta aranĝo\n" #: src/id.c:115 msgid "" "\n" "Without any OPTION, print some useful set of identified information.\n" msgstr "" "\n" "Sen iu ajn OPCIO, eligi iun utilan aron de uzanta kaj grupa informo.\n" #: src/id.c:153 msgid "--context (-Z) works only on an SELinux/SMACK-enabled kernel" msgstr "opcio '--context' (-Z) nur funkcias kun SELinuksa aŭ SMACKa kerno" #: src/id.c:158 msgid "--context (-Z) works only on an SELinux-enabled kernel" msgstr "opcio '--context' (-Z) nur funkcias kun SELinuksa kerno" #: src/id.c:192 msgid "cannot print security context when user specified" msgstr "maleblas eligi sekurecan kuntekston kiam uzanto indikatas" #: src/id.c:195 msgid "cannot print \"only\" of more than one choice" msgstr "maleblas eligi ion kun pliaj \"nuraj\" opcioj" #: src/id.c:204 msgid "cannot print only names or real IDs in default format" msgstr "maleblas eligi nur nomojn aŭ realajn numerojn en la defaŭlta aranĝo" #: src/id.c:208 msgid "option --zero not permitted in default format" msgstr "opcio «--zero» ne permesatas en la defaŭlta aranĝo" #: src/id.c:224 msgid "can't get process context" msgstr "ne eblas eltrovi kuntekston de procezo" #: src/id.c:280 msgid "cannot get effective UID" msgstr "malsukcesis eltrovi efektivan UID-on" #: src/id.c:344 #, c-format msgid "cannot find name for user ID %s" msgstr "ne eblas eltrovi nomon por uzantnumero %s" #: src/id.c:362 #, c-format msgid "uid=%s" msgstr "UID=%s" #: src/id.c:367 #, c-format msgid " gid=%s" msgstr " GID=%s" #: src/id.c:374 #, c-format msgid " euid=%s" msgstr " EUID=%s" #: src/id.c:382 #, c-format msgid " egid=%s" msgstr " EGID=%s" #: src/id.c:410 msgid " groups=" msgstr " grupoj=" #: src/id.c:426 #, c-format msgid " context=%s" msgstr " kunteksto=%s" #: src/install.c:314 #, fuzzy, c-format #| msgid "warning: disabling core dumps failed" msgid "warning: security labeling handle failed" msgstr "averto: malsukcesis malŝalti nekropsiojn" #: src/install.c:343 #, fuzzy, c-format #| msgid "warning: disabling core dumps failed" msgid "warning: %s: context lookup failed" msgstr "averto: malsukcesis malŝalti nekropsiojn" #: src/install.c:350 #, c-format msgid "warning: %s: failed to change context to %s" msgstr "averto: %s: malsukcesis ŝanĝi kuntekston al %s" #: src/install.c:384 #, c-format msgid "creating directory %s" msgstr "kreiĝas dosierujo %s" #: src/install.c:397 src/mkdir.c:133 src/mkdir.c:165 #, c-format msgid "failed to set default creation context for %s" msgstr "malsukcesis agordi defaŭltan krean kuntekston por %s" #: src/install.c:427 src/mkdir.c:185 #, c-format msgid "failed to restore context for %s" msgstr "malsukcesis restaŭri kuntekston por %s" #: src/install.c:475 #, c-format msgid "cannot change ownership of %s" msgstr "ne eblas ŝanĝi posedanton de %s" #: src/install.c:499 #, fuzzy, c-format msgid "cannot set timestamps for %s" msgstr "ne eblas agordi tempojn pri %s" #: src/install.c:521 src/split.c:523 src/timeout.c:539 #, c-format msgid "fork system call failed" msgstr "ne eblas krei novan procezon" #: src/install.c:525 #, c-format msgid "cannot run %s" msgstr "ne eblas ruli %s" #: src/install.c:528 #, c-format msgid "waiting for strip" msgstr "atendiĝas fino de 'strip'" #: src/install.c:530 #, c-format msgid "strip process terminated abnormally" msgstr "procezo 'strip' finiĝis nenormale" #: src/install.c:554 #, c-format msgid "invalid user %s" msgstr "nevalida uzanto: %s" #: src/install.c:592 #, c-format msgid "" "Usage: %s [OPTION]... [-T] SOURCE DEST\n" " or: %s [OPTION]... SOURCE... DIRECTORY\n" " or: %s [OPTION]... -t DIRECTORY SOURCE...\n" " or: %s [OPTION]... -d DIRECTORY...\n" msgstr "" "Uzmaniero: %s [OPCIO...] [-T] ORIGINO CELO\n" " aŭ: %s [OPCIO...] ORIGINO... DOSIERUJO\n" " aŭ: %s [OPCIO...] -t DOSIERUJO ORIGINO...\n" " aŭ: %s [OPCIO...] -d DOSIERUJO...\n" #: src/install.c:599 msgid "" "\n" "This install program copies files (often just compiled) into destination\n" "locations you choose. If you want to download and install a ready-to-use\n" "package on a GNU/Linux system, you should instead be using a package manager\n" "like yum(1) or apt-get(1).\n" "\n" "In the first three forms, copy SOURCE to DEST or multiple SOURCE(s) to\n" "the existing DIRECTORY, while setting permission modes and owner/group.\n" "In the 4th form, create all components of the given DIRECTORY(ies).\n" msgstr "" "\n" "Ĉi tiu instalprogramo kopias dosierojn (ofte ĵuse kompilitaj) en celajn\n" "lokojn kiujn vi elektas. Se vi volas elŝuti kaj instali uzpretan pakon\n" "sur GNU/Linuksa sistemo, vi devus uzi anstataŭe pakaĵmastrumilon kiel\n" "yum(1) aŭ apt-get(1).\n" "\n" "En la tri unuaj aranĝoj, ĝi kopias ORIGINOn al CELO, aŭ (pluraj) ORIGINO(j)n\n" "al ekzistanta DOSIERUJO, kaj starigas la permesojn kaj posedanton/grupon.\n" "En la kvara aranĝo, ĝi kreas ĉiujn elementojn de la indikata(j) DOSIERUJO(j).\n" "\n" #: src/install.c:613 msgid "" " --backup[=CONTROL] make a backup of each existing destination file\n" " -b like --backup but does not accept an argument\n" " -c (ignored)\n" " -C, --compare compare each pair of source and destination files, and\n" " in some cases, do not modify the destination at all\n" " -d, --directory treat all arguments as directory names; create all\n" " components of the specified directories\n" msgstr "" " --backup[=METODO] fari savkopion de ĉiu ekzistanta celdosiero\n" " -b kiel «--backup», sed ne akceptas argumenton\n" " -c (ignoriĝas)\n" " -C, --compare kompari ĉiun duopon de origina kaj cela dosieroj,\n" " kaj en kelkaj kazoj ne modifi la celon iel ajn\n" " -d, --directory trakti ĉiujn argumentojn kiel dosierujnomojn; krei\n" " ĉiujn elementojn de la indikataj dosierujoj\n" #: src/install.c:622 #, fuzzy msgid "" " -D create all leading components of DEST except the last,\n" " or all components of --target-directory,\n" " then copy SOURCE to DEST\n" " -g, --group=GROUP set group ownership, instead of process' current group\n" " -m, --mode=MODE set permission mode (as in chmod), instead of rwxr-xr-x\n" " -o, --owner=OWNER set ownership (super-user only)\n" msgstr "" " -D krei ĉiujn komencajn elementojn de CELO krom la lastan,\n" " kaj poste kopii ORIGINOn al CELO\n" " -g, --group=GRUPO starigi grupan anecon, anstataŭ grupo de aktuala procezo\n" " -m, --mode=MODUSO starigi permesojn (kiel en 'chmod') anstataŭ «rwxr-xr-x»\n" " -o, --owner=UZANTO starigi dosierposedanton (uzeblas nur per sistemestro)\n" #: src/install.c:630 msgid "" " -p, --preserve-timestamps apply access/modification times of SOURCE files\n" " to corresponding destination files\n" " -s, --strip strip symbol tables\n" " --strip-program=PROGRAM program used to strip binaries\n" " -S, --suffix=SUFFIX override the usual backup suffix\n" " -t, --target-directory=DIRECTORY copy all SOURCE arguments into DIRECTORY\n" " -T, --no-target-directory treat DEST as a normal file\n" " -v, --verbose print the name of each directory as it is created\n" msgstr "" " -p, --preserve-timestamps apliki la atingajn/modifajn tempojn de ORIGINOj\n" " al la korespondaj celdosieroj\n" " -s, --strip forigi el programoj la tabelojn de simboloj\n" " --strip-program=PROGRAMO uzenda programo por forigi simboltabelojn\n" " -S, --suffix=SUFIKSO uzenda savkopia sufikso\n" " -t, --target-directory=DOSIERUJO kopii ĉiujn ORIGINOjn al DOSIERUJO\n" " -T, --no-target-directory trakti CELOn kiel normalan dosieron\n" " -v, --verbose eligi la nomon de ĉiu dosierujo kiam ĝi kreiĝas\n" #: src/install.c:640 #, fuzzy msgid "" " --preserve-context preserve SELinux security context\n" " -Z set SELinux security context of destination\n" " file and each created directory to default type\n" " --context[=CTX] like -Z, or if CTX is specified then set the\n" " SELinux or SMACK security context to CTX\n" msgstr "" " --preserve-context konservi SELinuksan sekurecan kuntekston\n" " -Z, --context[=KUNTEKSTO] agordi sekurecan kuntekston de celdosiero al\n" " defaŭlta tipo, aŭ al KUNTEKSTO se ĝi indikatas\n" #: src/install.c:676 src/unlink.c:85 #, c-format msgid "cannot unlink %s" msgstr "malsukcesis forigi %s" #: src/install.c:857 #, c-format msgid "WARNING: ignoring --preserve-context; this kernel is not SELinux-enabled" msgstr "AVERTO: ignoriĝas '--preserve-context'; tiu ĉi kerno ne subtenas SELinux" #: src/install.c:897 msgid "the strip option may not be used when installing a directory" msgstr "opcio '--strip' malpermesatas dum instalado al dosierujo" #: src/install.c:900 msgid "target directory not allowed when installing a directory" msgstr "celdosierujo malpermesatas dum instalado al dosierujo" #: src/install.c:967 src/mkdir.c:292 src/stdbuf.c:352 #, c-format msgid "invalid mode %s" msgstr "nevalida moduso %s" #: src/install.c:974 #, c-format msgid "WARNING: ignoring --strip-program option as -s option was not specified" msgstr "AVERTO: ignoriĝas '--strip-program' ĉar opcio '-s' ne indikatas" #: src/install.c:979 #, c-format msgid "options --compare (-C) and --preserve-timestamps are mutually exclusive" msgstr "nekombineblas opcioj '--compare' (-C) kaj '--preserve-timestamps'" #: src/install.c:986 #, c-format msgid "options --compare (-C) and --strip are mutually exclusive" msgstr "nekombineblas opcioj '--compare' (-C) kaj '--strip'" #: src/install.c:992 #, c-format msgid "the --compare (-C) option is ignored when you specify a mode with non-permission bits" msgstr "opcio '--compare' (-C) ignoriĝas kiam indikatas moduso kiu enhavas nepermesajn bitojn" #. This is a proper name. See the gettext manual, section Names. #: src/join.c:41 src/sort.c:67 msgid "Mike Haertel" msgstr "Majk HERTEL (Mike Haertel)" #: src/join.c:196 msgid "" "For each pair of input lines with identical join fields, write a line to\n" "standard output. The default join field is the first, delimited by blanks.\n" msgstr "" #: src/join.c:205 #, fuzzy msgid "" "\n" " -a FILENUM also print unpairable lines from file FILENUM, where\n" " FILENUM is 1 or 2, corresponding to FILE1 or FILE2\n" " -e EMPTY replace missing input fields with EMPTY\n" msgstr "" " \n" "Skribas linion al ĉefeligujo por ĉiu duopo de eniglinioj kiu havas identajn\n" "kuniĝkampojn. Defaŭlta kuniĝkampo estas la unua, disigite per blankspaco.\n" "Kiam DOSIERO1 aŭ DOSIERO2 (sed ne ambaŭ) estas «-», ĉefenigujo legiĝas.\n" "\n" " -a NUMERO ankaŭ eligi nepareblajn liniojn de dosiero NUMERO; NUMERO\n" " estas 1 aŭ 2, kiuj korespondas al DOSIERO1 kaj DOSIERO2\n" " -e SIGNOĈENO anstataŭigi mankantajn enigajn kampojn per SIGNOĈENO\n" #: src/join.c:211 #, fuzzy #| msgid "" #| " -i, --ignore-case ignore differences in case when comparing fields\n" #| " -j FIELD equivalent to '-1 FIELD -2 FIELD'\n" #| " -o FORMAT obey FORMAT while constructing output line\n" #| " -t CHAR use CHAR as input and output field separator\n" msgid "" " -i, --ignore-case ignore differences in case when comparing fields\n" " -j FIELD equivalent to '-1 FIELD -2 FIELD'\n" " -o FORMAT obey FORMAT while constructing output line\n" " -t CHAR use CHAR as input and output field separator\n" msgstr "" " -i, --ignore-case ignori malsamecojn en uskleco dum komparo de kampoj\n" " -j KAMPO egalas al '-1 KAMPO -2 KAMPO'\n" " -o ARANĜO obei ARANĜOn dum konstruo de eliglinio\n" " -t SIGNO uzi SIGNOn kiel eniga kaj eliga kampdisigilo\n" #: src/join.c:217 #, fuzzy #| msgid "" #| " -v FILENUM like -a FILENUM, but suppress joined output lines\n" #| " -1 FIELD join on this FIELD of file 1\n" #| " -2 FIELD join on this FIELD of file 2\n" #| " --check-order check that the input is correctly sorted, even\n" #| " if all input lines are pairable\n" #| " --nocheck-order do not check that the input is correctly sorted\n" #| " --header treat the first line in each file as field headers,\n" #| " print them without trying to pair them\n" msgid "" " -v FILENUM like -a FILENUM, but suppress joined output lines\n" " -1 FIELD join on this FIELD of file 1\n" " -2 FIELD join on this FIELD of file 2\n" " --check-order check that the input is correctly sorted, even\n" " if all input lines are pairable\n" " --nocheck-order do not check that the input is correctly sorted\n" " --header treat the first line in each file as field headers,\n" " print them without trying to pair them\n" msgstr "" " -v NUMERO kiel '-a NUMERO' sed forlasi la kunigitajn eligliniojn\n" " -1 KAMPO kunigi je ĉi tiu KAMPO (positiva entjero) de dosiero 1\n" " -2 KAMPO kunigi je ĉi tiu KAMPO (positiva entjero) de dosiero 2\n" " --check-order kontroli ke la enigo estas ĝuste ordigita,\n" " eĉ se ĉiuj eniglinioj estas pareblaj\n" " --nocheck-order ne kontroli ke la enigo estas ĝuste ordigita\n" " --header trakti la unuan linion en ĉiu dosiero kiel kampĉapojn,\n" " kaj eligi ilin sen provi ilin parigi\n" #: src/join.c:227 #, fuzzy msgid " -z, --zero-terminated line delimiter is NUL, not newline\n" msgstr " -z, --zero-terminated disigi eligon per nulbajtoj anstataŭ per novlinioj\n" #: src/join.c:232 msgid "" "\n" "Unless -t CHAR is given, leading blanks separate fields and are ignored,\n" "else fields are separated by CHAR. Any FIELD is a field number counted\n" "from 1. FORMAT is one or more comma or blank separated specifications,\n" "each being 'FILENUM.FIELD' or '0'. Default FORMAT outputs the join field,\n" "the remaining fields from FILE1, the remaining fields from FILE2, all\n" "separated by CHAR. If FORMAT is the keyword 'auto', then the first\n" "line of each file determines the number of fields output for each line.\n" "\n" "Important: FILE1 and FILE2 must be sorted on the join fields.\n" "E.g., use \"sort -k 1b,1\" if 'join' has no options,\n" "or use \"join -t ''\" if 'sort' has no options.\n" "Note, comparisons honor the rules specified by 'LC_COLLATE'.\n" "If the input is not sorted and some lines cannot be joined, a\n" "warning message will be given.\n" msgstr "" "\n" "Krom se '-t SIGNO' indikatas, komencaj spacetoj disigas kampojn kaj ignoriĝas,\n" "alie kampoj disigiĝas per SIGNO. Ĉiu KAMPO estas numero de kampo, kiu komencas\n" "nombri ekde 1. ARANĜO estas unu aŭ pluraj kome aŭ spacete disigitaj indikoj,\n" "ĉiu de formo 'DOSIERNUMERO.KAMPO' aŭ '0'. La defaŭlta ARANĜO eligas la kunigan\n" "kampon, la restantajn kampojn de DOSIERO1, la restantajn kampojn de DOSIERO2,\n" "kaj ĉiuj disigiĝas per SIGNO. Se ARANĜO estas la ŝlosilvorto 'auto', la unua\n" "linio de ĉiu dosiero determinas la nombron de kampoj kiuj eligas por ĉiu linio.\n" "\n" "Gravas: DOSIERO1 kaj DOSIERO2 devas esti ordigitaj je la kunigaj kampoj.\n" "Ekzemple: uzu «sort -k 1b,1» se 'join' uziĝas sen opcioj,\n" "aŭ uzu «join -t ''» se 'sort' uziĝis sen iu ajn opcio.\n" "Notu ke komparoj honoras la regulojn indikatajn de 'LC_COLLATE'.\n" "Se la enigo ne estas ordigita kaj kelkaj linioj ne povas esti kunigitaj,\n" "averta mesaĝo montriĝos.\n" #: src/join.c:417 #, c-format msgid "%s:%: is not sorted: %.*s" msgstr "%s:%: ne estas ordigita: %.*s" #: src/join.c:848 src/join.c:1046 #, c-format msgid "invalid field number: %s" msgstr "nevalida kampnumero: %s" #: src/join.c:869 src/join.c:878 #, c-format msgid "invalid field specifier: %s" msgstr "nevalida kampindiko: %s" #: src/join.c:885 #, c-format msgid "invalid file number in field spec: %s" msgstr "nevalida dosiernumero en kampindiko: %s" #: src/join.c:929 #, c-format msgid "incompatible join fields %lu, %lu" msgstr "nekongruaj kunigkampoj %lu, %lu" #: src/join.c:1057 msgid "conflicting empty-field replacement strings" msgstr "konfliktas la anstataŭigaj ĉenoj por vakaj kampoj" #: src/join.c:1109 src/sort.c:4534 #, c-format msgid "multi-character tab %s" msgstr "plursigna tabo %s" #: src/join.c:1113 src/sort.c:4539 msgid "incompatible tabs" msgstr "nekongruaj taboj" #: src/join.c:1186 msgid "both files cannot be standard input" msgstr "ne ambaŭ dosieroj povas esti ĉefenigujo" #: src/kill.c:77 #, c-format msgid "" "Usage: %s [-s SIGNAL | -SIGNAL] PID...\n" " or: %s -l [SIGNAL]...\n" " or: %s -t [SIGNAL]...\n" msgstr "" "Uzmaniero: %s [-s SIGNALO | -SIGNALO] PROCEZNUMERO...\n" " aŭ: %s -l [SIGNALO...]\n" " aŭ: %s -t [SIGNALO...]\n" #: src/kill.c:83 msgid "Send signals to processes, or list signals.\n" msgstr "" "Sendas signalojn al procezoj, aŭ eligas signalnomojn kaj -numerojn.\n" "\n" #: src/kill.c:89 msgid "" " -s, --signal=SIGNAL, -SIGNAL\n" " specify the name or number of the signal to be sent\n" " -l, --list list signal names, or convert signal names to/from numbers\n" " -t, --table print a table of signal information\n" msgstr "" " -s, --signal=SIGNALO, -SIGNALO\n" " la nomo aŭ la numero de la sendenda signalo\n" " -l, --list [IO] montri signalnomojn (aŭ konverti inter nomoj kaj numeroj)\n" " -t, --table montri tabelon de informoj pri signaloj\n" #: src/kill.c:97 msgid "" "\n" "SIGNAL may be a signal name like 'HUP', or a signal number like '1',\n" "or the exit status of a process terminated by a signal.\n" "PID is an integer; if negative it identifies a process group.\n" msgstr "" "\n" "SIGNALO povas esti signalnomo kiel 'HUP', signalnumero kiel '1',\n" "aŭ la elirstato de procezo kiu terminiĝis per signalo.\n" "PROCEZNUMERO estas entjero; se negativa, ĝi indikas procezgrupon.\n" #: src/kill.c:206 #, c-format msgid "%s: invalid process id" msgstr "%s: nevalida indiko de procezo" #: src/kill.c:260 #, c-format msgid "invalid option -- %c" msgstr "nevalida opcio -- %c" #: src/kill.c:269 #, c-format msgid "%s: multiple signals specified" msgstr "%s: pluraj signaloj indikatas" #: src/kill.c:284 #, c-format msgid "multiple -l or -t options specified" msgstr "pluraj opcioj '-l' aŭ '-t' indikatas" #: src/kill.c:301 #, c-format msgid "cannot combine signal with -l or -t" msgstr "maleblas kombini signalon kun opcio '-l' aŭ '-t'" #: src/kill.c:307 #, c-format msgid "no process ID specified" msgstr "neniu proceznumero indikatas" #: src/libstdbuf.c:110 #, c-format msgid "invalid buffering mode %s for %s\n" msgstr "nevalida bufra moduso %s por %s\n" #: src/libstdbuf.c:122 #, c-format msgid "failed to allocate a % byte stdio buffer\n" msgstr "malsukcesis disponigi enigan/eligan bufron de % bajtoj\n" #: src/libstdbuf.c:132 #, c-format msgid "could not set buffering of %s to mode %s\n" msgstr "malsukcesis agordi bufran moduson de %s al %s\n" #. This is a proper name. See the gettext manual, section Names. #: src/link.c:36 src/unlink.c:36 src/who.c:52 msgid "Michael Stone" msgstr "Majkel STON (Michael Stone)" #: src/link.c:45 #, c-format msgid "" "Usage: %s FILE1 FILE2\n" " or: %s OPTION\n" msgstr "" "Uzmaniero: %s DOSIERO1 DOSIERO2\n" " aŭ: %s OPCIO\n" #: src/link.c:48 msgid "" "Call the link function to create a link named FILE2 to an existing FILE1.\n" "\n" msgstr "Kreas ligon de nomo DOSIERO2 al ekzistanta DOSIERO1.\n" #: src/link.c:89 #, c-format msgid "cannot create link %s to %s" msgstr "ne eblas krei ligon %s al %s" #: src/ln.c:213 #, c-format msgid "%s: hard link not allowed for directory" msgstr "%s: senpera ligo malpermesatas por dosierujo" #: src/ln.c:238 #, c-format msgid "%s: cannot overwrite directory" msgstr "%s: ne eblas anstataŭigi dosierujon" #: src/ln.c:285 #, c-format msgid "%s: replace %s? " msgstr "%s: ĉu anstataŭigi %s? " #: src/ln.c:383 #, c-format msgid "failed to create symbolic link %s" msgstr "malsukcesis krei simbolan ligon %s" #: src/ln.c:384 #, c-format msgid "failed to create symbolic link %s -> %s" msgstr "malsukcesis krei simbolan ligon %s al %s" #: src/ln.c:386 #, c-format msgid "failed to create hard link to %.0s%s" msgstr "malsukcesis krei senperan ligon al %.0s%s" #: src/ln.c:389 #, c-format msgid "failed to create hard link %s" msgstr "malsukcesis krei senperan ligon %s" #: src/ln.c:390 #, c-format msgid "failed to create hard link %s => %s" msgstr "malsukcesis krei senperan ligon %s al %s" #: src/ln.c:416 #, fuzzy, c-format #| msgid "" #| "Usage: %s [OPTION]... [-T] TARGET LINK_NAME (1st form)\n" #| " or: %s [OPTION]... TARGET (2nd form)\n" #| " or: %s [OPTION]... TARGET... DIRECTORY (3rd form)\n" #| " or: %s [OPTION]... -t DIRECTORY TARGET... (4th form)\n" msgid "" "Usage: %s [OPTION]... [-T] TARGET LINK_NAME\n" " or: %s [OPTION]... TARGET\n" " or: %s [OPTION]... TARGET... DIRECTORY\n" " or: %s [OPTION]... -t DIRECTORY TARGET...\n" msgstr "" "Uzmaniero: %s [OPCIO...] [-T] CELO LIGNOMO (unua formo)\n" " aŭ: %s [OPCIO...] CELO (dua formo)\n" " aŭ: %s [OPCIO...] CELO... DOSIERUJO (tria formo)\n" " aŭ: %s [OPCIO...] -t DOSIERUJO CELO... (kvara formo)\n" #: src/ln.c:423 msgid "" "In the 1st form, create a link to TARGET with the name LINK_NAME.\n" "In the 2nd form, create a link to TARGET in the current directory.\n" "In the 3rd and 4th forms, create links to each TARGET in DIRECTORY.\n" "Create hard links by default, symbolic links with --symbolic.\n" "By default, each destination (name of new link) should not already exist.\n" "When creating hard links, each TARGET must exist. Symbolic links\n" "can hold arbitrary text; if later resolved, a relative link is\n" "interpreted in relation to its parent directory.\n" msgstr "" "En la unua formo, kreiĝas ligo al CELO kun nomo LIGNOMO.\n" "En la dua formo, kreiĝas ligo en la nuna dosierujo al CELO.\n" "En la tria kaj kvara formoj, kreiĝas ligoj en DOSIERUJO al ĉiu CELO.\n" "\n" "Defaŭlte kreiĝas rektaj ligoj, simbolaj ligoj nur kun «--symbolic».\n" "Defaŭlte ĉiu nomo de nova ligo devus ne jam ekzisti.\n" "Dum kreado de rektaj ligoj, ĉiu CELO devas ekzisti.\n" "Simbolaj ligoj povas enhavi iun ajn tekston; dum posta sekvado,\n" "relativa ligo interpretiĝas baze de sia patra dosierujo.\n" #: src/ln.c:436 msgid "" " --backup[=CONTROL] make a backup of each existing destination file\n" " -b like --backup but does not accept an argument\n" " -d, -F, --directory allow the superuser to attempt to hard link\n" " directories (note: will probably fail due to\n" " system restrictions, even for the superuser)\n" " -f, --force remove existing destination files\n" msgstr "" " --backup[=METODO] fari savkopion de ĉiu ekzistanta celdosiero\n" " -b kiel «--backup», sed ne akceptas argumenton\n" " -d, -F, --directory permesi al ĉefuzanto provi krei rektajn ligojn al\n" " dosierujoj (rimarko: probable malsukcesos pro\n" " sistemaj limoj, eĉ por la ĉefuzanto)\n" " -f, --force forigi ekzistantajn celdosierojn\n" #: src/ln.c:444 #, fuzzy #| msgid "" #| " -i, --interactive prompt whether to remove destinations\n" #| " -L, --logical dereference TARGETs that are symbolic links\n" #| " -n, --no-dereference treat LINK_NAME as a normal file if\n" #| " it is a symbolic link to a directory\n" #| " -P, --physical make hard links directly to symbolic links\n" #| " -r, --relative create symbolic links relative to link location\n" #| " -s, --symbolic make symbolic links instead of hard links\n" msgid "" " -i, --interactive prompt whether to remove destinations\n" " -L, --logical dereference TARGETs that are symbolic links\n" " -n, --no-dereference treat LINK_NAME as a normal file if\n" " it is a symbolic link to a directory\n" " -P, --physical make hard links directly to symbolic links\n" " -r, --relative with -s, create links relative to link location\n" " -s, --symbolic make symbolic links instead of hard links\n" msgstr "" " -i, --interactive demandi ĉu forigi jam ekzistantajn nomojn\n" " -L, --logical sekvi CELOjn kiuj estas simbolaj ligoj\n" " -n, --no-dereference trakti LIGNOMOn kiel normalan dosieron se ĝi\n" " estas simbola ligo al dosierujo\n" " -P, --physical krei rektajn ligojn rekte al simbolaj ligoj\n" " -r, --relative krei simbolajn ligojn relative al ligloko\n" " -s, --symbolic krei simbolajn ligojn anstataŭ rektajn\n" #: src/ln.c:453 msgid "" " -S, --suffix=SUFFIX override the usual backup suffix\n" " -t, --target-directory=DIRECTORY specify the DIRECTORY in which to create\n" " the links\n" " -T, --no-target-directory treat LINK_NAME as a normal file always\n" " -v, --verbose print name of each linked file\n" msgstr "" " -S, --suffix=SUFIKSO uzi ĉi tiun anstataŭ kutiman savkopian sufikson\n" " -t, --target-directory=UJO krei la ligojn en ĉi tiu dosierujo\n" " -T, --no-target-directory ĉiam trakti LIGNOMOn kiel normalan dosieron\n" " -v, --verbose montri nomon de ĉiu ligata dosiero\n" #: src/ln.c:463 #, c-format msgid "" "\n" "Using -s ignores -L and -P. Otherwise, the last option specified controls\n" "behavior when a TARGET is a symbolic link, defaulting to %s.\n" msgstr "" "\n" "Uzo de opcio '-s' ignoras '-L' kaj '-P'. Alie, la laste indikata opcio\n" "difinas la konduton kiam iu CELO estas simbola ligo -- defaŭlte %s.\n" "\n" #: src/ln.c:579 msgid "cannot do --relative without --symbolic" msgstr "maleblas '--relative' sen '--symbolic'" #: src/ln.c:591 msgid "cannot combine --target-directory and --no-target-directory" msgstr "nekombineblas la opcioj '--target-directory' (-t) kaj '--no-target-directory' (-T)" #: src/ln.c:639 #, fuzzy, c-format #| msgid "extra argument %s" msgid "target %s" msgstr "superflua argumento: %s" #. This is a proper name. See the gettext manual, section Names. #: src/logname.c:30 msgid "FIXME: unknown" msgstr "(nekonato)" #: src/logname.c:39 #, c-format msgid "Usage: %s [OPTION]\n" msgstr "Uzmaniero: %s [OPCIO]\n" #: src/logname.c:40 msgid "" "Print the user's login name.\n" "\n" msgstr "" #: src/logname.c:78 msgid "no login name" msgstr "neniu ensaluta nomo" #. TRANSLATORS: ls output needs to be aligned for ease of reading, #. so be wary of using variable width fields from the locale. #. Note %b is handled specially by ls and aligned correctly. #. Note also that specifying a width as in %5b is erroneous as strftime #. will count bytes rather than characters in multibyte locales. #: src/ls.c:780 msgid "%b %e %Y" msgstr "%b %e %Y" #. TRANSLATORS: ls output needs to be aligned for ease of reading, #. so be wary of using variable width fields from the locale. #. Note %b is handled specially by ls and aligned correctly. #. Note also that specifying a width as in %5b is erroneous as strftime #. will count bytes rather than characters in multibyte locales. #: src/ls.c:793 msgid "%b %e %H:%M" msgstr "%b %e %H:%M" #: src/ls.c:2024 #, fuzzy msgid "invalid line width" msgstr "nevalida linia larĝo: %s" #: src/ls.c:2102 #, fuzzy msgid "invalid tab size" msgstr "nevalida taba grando: %s" #: src/ls.c:2298 #, c-format msgid "ignoring invalid width in environment variable COLUMNS: %s" msgstr "ignoriĝas nevalida larĝo (%s) en ĉirkaŭaĵa variablo COLUMNS" #: src/ls.c:2329 #, c-format msgid "ignoring invalid tab size in environment variable TABSIZE: %s" msgstr "ignoriĝas nevalida grando de tabo (%s) en ĉirkaŭaĵa variablo TABSIZE" #: src/ls.c:2375 #, fuzzy #| msgid "options '-%s' are incompatible" msgid "--dired and --zero are incompatible" msgstr "nekombineblas opcioj «-%s»" #: src/ls.c:2416 #, c-format msgid "invalid time style format %s" msgstr "nevalida temparanĝo: %s" #: src/ls.c:2440 msgid "Valid arguments are:\n" msgstr "Validaj argumentoj estas:\n" #: src/ls.c:2444 msgid " - +FORMAT (e.g., +%H:%M) for a 'date'-style format\n" msgstr "" #: src/ls.c:2818 #, c-format msgid "unrecognized prefix: %s" msgstr "nerekonata prefikso: %s" #: src/ls.c:2848 #, c-format msgid "unparsable value for LS_COLORS environment variable" msgstr "valoro de ĉirkaŭaĵa variablo LS_COLORS ne analizeblas " #: src/ls.c:2877 src/stat.c:1056 #, c-format msgid "ignoring invalid value of environment variable QUOTING_STYLE: %s" msgstr "ignoriĝas nevalida valoro (%s) de ĉirkaŭaĵa variablo QUOTING_STYLE" #: src/ls.c:2946 src/pwd.c:164 #, c-format msgid "cannot open directory %s" msgstr "ne eblas malfermi dosierujon %s" #: src/ls.c:2961 #, c-format msgid "cannot determine device and inode of %s" msgstr "ne eblas eltrovi aparaton kaj indeksnodon de %s" #: src/ls.c:2970 #, c-format msgid "%s: not listing already-listed directory" msgstr "%s: ne listiĝas jam listita dosierujo" #: src/ls.c:2995 src/ls.c:3412 #, c-format msgid "error canonicalizing %s" msgstr "eraro dum normaligo de %s" #: src/ls.c:3057 src/pwd.c:232 #, c-format msgid "reading directory %s" msgstr "legiĝas dosierujo %s" #: src/ls.c:3072 #, c-format msgid "closing directory %s" msgstr "fermiĝas dosierujo %s" #: src/ls.c:3790 #, c-format msgid "cannot compare file names %s and %s" msgstr "ne eblas kompari dosiernomojn %s kaj %s" #: src/ls.c:5397 msgid "" "List information about the FILEs (the current directory by default).\n" "Sort entries alphabetically if none of -cftuvSUX nor --sort is specified.\n" msgstr "" "Listigas informon pri DOSIERUJOj (defaŭlte pri la aktuala).\n" "Alfabetigas la termojn se neniu de '-cftuvSUX' nek '--sort' indikatas.\n" "\n" #: src/ls.c:5404 msgid "" " -a, --all do not ignore entries starting with .\n" " -A, --almost-all do not list implied . and ..\n" " --author with -l, print the author of each file\n" " -b, --escape print C-style escapes for nongraphic characters\n" msgstr "" #: src/ls.c:5410 msgid "" " --block-size=SIZE with -l, scale sizes by SIZE when printing them;\n" " e.g., '--block-size=M'; see SIZE format below\n" msgstr "" #: src/ls.c:5414 msgid "" " -B, --ignore-backups do not list implied entries ending with ~\n" " -c with -lt: sort by, and show, ctime (time of last\n" " modification of file status information);\n" " with -l: show ctime and sort by name;\n" " otherwise: sort by ctime, newest first\n" msgstr "" #: src/ls.c:5421 msgid "" " -C list entries by columns\n" " --color[=WHEN] colorize the output; WHEN can be 'always' (default\n" " if omitted), 'auto', or 'never'; more info below\n" " -d, --directory list directories themselves, not their contents\n" " -D, --dired generate output designed for Emacs' dired mode\n" msgstr "" #: src/ls.c:5430 msgid "" " -f list all entries in directory order\n" " -F, --classify[=WHEN] append indicator (one of */=>@|) to entries;\n" " WHEN can be 'always' (default if omitted),\n" " 'auto', or 'never'\n" " --file-type likewise, except do not append '*'\n" " --format=WORD across -x, commas -m, horizontal -x, long -l,\n" " single-column -1, verbose -l, vertical -C\n" " --full-time like -l --time-style=full-iso\n" msgstr "" #: src/ls.c:5440 msgid " -g like -l, but do not list owner\n" msgstr "" #: src/ls.c:5443 msgid "" " --group-directories-first\n" " group directories before files;\n" " can be augmented with a --sort option, but any\n" " use of --sort=none (-U) disables grouping\n" msgstr "" #: src/ls.c:5449 msgid " -G, --no-group in a long listing, don't print group names\n" msgstr "" #: src/ls.c:5452 msgid "" " -h, --human-readable with -l and -s, print sizes like 1K 234M 2G etc.\n" " --si likewise, but use powers of 1000 not 1024\n" msgstr "" #: src/ls.c:5456 msgid "" " -H, --dereference-command-line\n" " follow symbolic links listed on the command line\n" " --dereference-command-line-symlink-to-dir\n" " follow each command line symbolic link\n" " that points to a directory\n" " --hide=PATTERN do not list implied entries matching shell PATTERN\n" " (overridden by -a or -A)\n" msgstr "" #: src/ls.c:5466 msgid "" " --hyperlink[=WHEN] hyperlink file names; WHEN can be 'always'\n" " (default if omitted), 'auto', or 'never'\n" msgstr "" #: src/ls.c:5470 msgid "" " --indicator-style=WORD append indicator with style WORD to entry names:\n" " none (default), slash (-p),\n" " file-type (--file-type), classify (-F)\n" " -i, --inode print the index number of each file\n" " -I, --ignore=PATTERN do not list implied entries matching shell PATTERN\n" msgstr "" #: src/ls.c:5479 msgid "" " -k, --kibibytes default to 1024-byte blocks for file system usage;\n" " used only with -s and per directory totals\n" msgstr "" #: src/ls.c:5484 msgid "" " -l use a long listing format\n" " -L, --dereference when showing file information for a symbolic\n" " link, show information for the file the link\n" " references rather than for the link itself\n" " -m fill width with a comma separated list of entries\n" msgstr "" #: src/ls.c:5492 msgid "" " -n, --numeric-uid-gid like -l, but list numeric user and group IDs\n" " -N, --literal print entry names without quoting\n" " -o like -l, but do not list group information\n" " -p, --indicator-style=slash\n" " append / indicator to directories\n" msgstr "" #: src/ls.c:5499 msgid "" " -q, --hide-control-chars print ? instead of nongraphic characters\n" " --show-control-chars show nongraphic characters as-is (the default,\n" " unless program is 'ls' and output is a terminal)\n" " -Q, --quote-name enclose entry names in double quotes\n" " --quoting-style=WORD use quoting style WORD for entry names:\n" " literal, locale, shell, shell-always,\n" " shell-escape, shell-escape-always, c, escape\n" " (overrides QUOTING_STYLE environment variable)\n" msgstr "" #: src/ls.c:5510 msgid "" " -r, --reverse reverse order while sorting\n" " -R, --recursive list subdirectories recursively\n" " -s, --size print the allocated size of each file, in blocks\n" msgstr "" #: src/ls.c:5515 msgid "" " -S sort by file size, largest first\n" " --sort=WORD sort by WORD instead of name: none (-U), size (-S),\n" " time (-t), version (-v), extension (-X), width\n" " --time=WORD change the default of using modification times;\n" " access time (-u): atime, access, use;\n" " change time (-c): ctime, status;\n" " birth time: birth, creation;\n" " with -l, WORD determines which time to show;\n" " with --sort=time, sort by WORD (newest first)\n" msgstr "" #: src/ls.c:5527 msgid " --time-style=TIME_STYLE time/date format with -l; see TIME_STYLE below\n" msgstr "" #: src/ls.c:5530 msgid "" " -t sort by time, newest first; see --time\n" " -T, --tabsize=COLS assume tab stops at each COLS instead of 8\n" msgstr "" #: src/ls.c:5534 msgid "" " -u with -lt: sort by, and show, access time;\n" " with -l: show access time and sort by name;\n" " otherwise: sort by access time, newest first\n" " -U do not sort; list entries in directory order\n" " -v natural sort of (version) numbers within text\n" msgstr "" #: src/ls.c:5541 msgid "" " -w, --width=COLS set output width to COLS. 0 means no limit\n" " -x list entries by lines instead of by columns\n" " -X sort alphabetically by entry extension\n" " -Z, --context print any security context of each file\n" " --zero end each output line with NUL, not newline\n" " -1 list one file per line\n" msgstr "" #: src/ls.c:5552 msgid "" "\n" "The TIME_STYLE argument can be full-iso, long-iso, iso, locale, or +FORMAT.\n" "FORMAT is interpreted like in date(1). If FORMAT is FORMAT1FORMAT2,\n" "then FORMAT1 applies to non-recent files and FORMAT2 to recent files.\n" "TIME_STYLE prefixed with 'posix-' takes effect only outside the POSIX locale.\n" "Also the TIME_STYLE environment variable sets the default style to use.\n" msgstr "" #: src/ls.c:5560 msgid "" "\n" "Using color to distinguish file types is disabled both by default and\n" "with --color=never. With --color=auto, ls emits color codes only when\n" "standard output is connected to a terminal. The LS_COLORS environment\n" "variable can change the settings. Use the dircolors command to set it.\n" msgstr "" #: src/ls.c:5567 msgid "" "\n" "Exit status:\n" " 0 if OK,\n" " 1 if minor problems (e.g., cannot access subdirectory),\n" " 2 if serious trouble (e.g., cannot access command-line argument).\n" msgstr "" #. This is a proper name. See the gettext manual, section Names. #: src/digest.c:135 msgid "Kayvan Aghaiepour" msgstr "Kejven AGEJPUR (Kayvan Aghaiepour)" #. This is a proper name. See the gettext manual, section Names. #: src/digest.c:138 msgid "Q. Frank Xia" msgstr "Frenk KSIA (Q. Frank Xia)" #. This is a proper name. See the gettext manual, section Names. #: src/digest.c:142 msgid "Samuel Neves" msgstr "" #. This is a proper name. See the gettext manual, section Names. #: src/digest.c:145 src/seq.c:48 msgid "Ulrich Drepper" msgstr "Ulriĥ DREPER (Ulrich Drepper)" #. This is a proper name. See the gettext manual, section Names. #: src/digest.c:146 msgid "Scott Miller" msgstr "Skot MILER (Scott Miller)" #. This is a proper name. See the gettext manual, section Names. #: src/digest.c:147 msgid "David Madore" msgstr "David MADOR (David Madore)" #: src/digest.c:407 msgid "" "Print or verify checksums.\n" "By default use the 32 bit CRC algorithm.\n" msgstr "" #: src/digest.c:412 #, fuzzy, c-format msgid "Print or check %s (%d-bit) checksums.\n" msgstr "" "Uzmaniero: %s [OPCIO...] [DOSIERO...]\n" "\n" "Montras aŭ kontrolas %s-kontrolsumojn (%d-bitajn).\n" "\n" "Sen DOSIERO, aŭ kiam DOSIERO estas «-», ĉefenigujo legiĝas.\n" "\n" #: src/digest.c:421 #, fuzzy msgid "" "\n" " -r use BSD sum algorithm (the default), use 1K blocks\n" " -s, --sysv use System V sum algorithm, use 512 bytes blocks\n" msgstr "" "Eligas kontrolsumon kaj nombron de blokoj por ĉiu DOSIERO.\n" "\n" " -r uzi BSD-sumalgoritmon, uzi blokojn de 1K\n" " -s, --sysv uzi Sistemo V-sumalgoritmon, uzi blokojn de 512 bajtoj\n" #: src/digest.c:431 msgid " -a, --algorithm=TYPE select the digest type to use. See DIGEST below.\n" msgstr "" #: src/digest.c:439 #, fuzzy msgid " -b, --binary read in binary mode (default unless reading tty stdin)\n" msgstr "" " -b, --binary legi en duuma moduso\n" " (defaŭlte kiam ne legiĝas terminala ĉefenigujo)\n" #: src/digest.c:444 #, fuzzy msgid " -b, --binary read in binary mode\n" msgstr " -b, --binary legi en duuma moduso\n" #: src/digest.c:448 #, fuzzy #| msgid " -c, --check read %s sums from the FILEs and check them\n" msgid " -c, --check read checksums from the FILEs and check them\n" msgstr " -c, --check legi %s-kontrolsumojn el la DOSIEROj kaj kontroli ilin\n" #: src/digest.c:452 msgid "" " -l, --length=BITS digest length in bits; must not exceed the max for\n" " the blake2 algorithm and must be a multiple of 8\n" msgstr "" #: src/digest.c:458 #, fuzzy #| msgid " --tag create a BSD-style checksum\n" msgid " --tag create a BSD-style checksum (the default)\n" msgstr " --tag krei kontrolsumon en BSD-stilo\n" #: src/digest.c:461 #, fuzzy #| msgid " --tag create a BSD-style checksum\n" msgid " --untagged create a reversed style checksum, without digest type\n" msgstr " --tag krei kontrolsumon en BSD-stilo\n" #: src/digest.c:465 #, fuzzy #| msgid " --tag create a BSD-style checksum\n" msgid " --tag create a BSD-style checksum\n" msgstr " --tag krei kontrolsumon en BSD-stilo\n" #: src/digest.c:471 #, fuzzy #| msgid " -t, --text read in text mode (default if reading tty stdin)\n" msgid " -t, --text read in text mode (default if reading tty stdin)\n" msgstr "" " -t, --text legi en teksta moduso\n" " (defaŭlte kiam legiĝas terminala ĉefenigujo)\n" #: src/digest.c:475 #, fuzzy #| msgid " -t, --text read in text mode (default)\n" msgid " -t, --text read in text mode (default)\n" msgstr " -t, --text legi en teksta moduso (defaŭlte)\n" #: src/digest.c:479 #, fuzzy #| msgid " -z, --zero end each output line with NUL, not newline\n" msgid "" " -z, --zero end each output line with NUL, not newline,\n" " and disable file name escaping\n" msgstr " -z, --zero disigi eligon per nulbajtoj anstataŭ per novlinioj\n" #: src/digest.c:483 #, fuzzy msgid "" "\n" "The following five options are useful only when verifying checksums:\n" " --ignore-missing don't fail or report status for missing files\n" " --quiet don't print OK for each successfully verified file\n" " --status don't output anything, status code shows success\n" " --strict exit non-zero for improperly formatted checksum lines\n" " -w, --warn warn about improperly formatted checksum lines\n" "\n" msgstr "" "\n" "La sekvaj kvar opcioj nur utilas dum kontrolo de kontrolsumoj:\n" " --quiet ne eligi «bone» por ĉiu sukcese kontrolita dosiero\n" " --status ne eligi ion ajn; la elirstato montras (mal)sukceson\n" " --strict eliri nenule por malĝuste formitaj kontrolsumaj linioj\n" " -w, --warn averti pri malĝuste formitaj kontrolsumaj linioj\n" "\n" #: src/digest.c:495 #, fuzzy #| msgid " --debug print warnings about invalid input\n" msgid " --debug indicate which implementation used\n" msgstr " --debug montri avertojn je nevalida enigo\n" #: src/digest.c:502 msgid "" "\n" "DIGEST determines the digest algorithm and default output format:\n" " 'sysv' (equivalent to sum -s)\n" " 'bsd' (equivalent to sum -r)\n" " 'crc' (equivalent to cksum)\n" " 'md5' (equivalent to md5sum)\n" " 'sha1' (equivalent to sha1sum)\n" " 'sha224' (equivalent to sha224sum)\n" " 'sha256' (equivalent to sha256sum)\n" " 'sha384' (equivalent to sha384sum)\n" " 'sha512' (equivalent to sha512sum)\n" " 'blake2b' (equivalent to b2sum)\n" " 'sm3' (only available through cksum)\n" "\n" msgstr "" #: src/digest.c:519 #, c-format msgid "" "\n" "The sums are computed as described in %s.\n" msgstr "" #: src/digest.c:522 #, fuzzy msgid "" "When checking, the input should be a former output of this program.\n" "The default mode is to print a line with: checksum, a space,\n" "a character indicating input mode ('*' for binary, ' ' for text\n" "or where binary is insignificant), and name for each FILE.\n" "\n" "Note: There is no difference between binary mode and text mode on GNU systems.\n" msgstr "" "\n" "La kontrolsumoj kalkuliĝas kiel estas priskribita en %s. Dum kontrolo,\n" "la enigo devas esti antaŭa eligo de ĉi tiu programo. La defaŭlta reĝimo\n" "estas eligi por ĉiu DOSIERO linion kiu konsistas de: kontrolsumo, signo kiu\n" "indikas la enigan moduson («*» por duuma, spaceto por teksta), kaj la nomo.\n" #: src/digest.c:532 msgid "" "When checking, the input should be a former output of this program,\n" "or equivalent standalone program.\n" msgstr "" #: src/digest.c:1067 #, c-format msgid "%s: too many checksum lines" msgstr "%s: tro multaj linioj de kontrolsumoj" #: src/digest.c:1097 #, c-format msgid "%s: %: improperly formatted %s checksum line" msgstr "%s: linio %: nevalida %s-kontrolsumo" #: src/digest.c:1130 #, fuzzy msgid "FAILED open or read" msgstr "%s: malsukcesis malfermo aŭ lego\n" # Ĉi tiu priskribas malsaman kontrolsumon. #: src/digest.c:1168 msgid "FAILED" msgstr "MALSAMAS" # Ĉi tiu priskribas kongruan kontrolsumon. #: src/digest.c:1170 msgid "OK" msgstr "bonas" #: src/digest.c:1195 #, fuzzy, c-format #| msgid "%s: no properly formatted %s checksum lines found" msgid "%s: no properly formatted checksum lines found" msgstr "%s: neniu valida %s-kontrolsumo troviĝas" #: src/digest.c:1205 #, c-format msgid "WARNING: % line is improperly formatted" msgid_plural "WARNING: % lines are improperly formatted" msgstr[0] "AVERTO: % linio malbone aranĝatas" msgstr[1] "AVERTO: % linioj malbone aranĝatas" #: src/digest.c:1213 #, c-format msgid "WARNING: % listed file could not be read" msgid_plural "WARNING: % listed files could not be read" msgstr[0] "AVERTO: % listita dosiero ne legeblas" msgstr[1] "AVERTO: % listitaj dosieroj ne legeblas" #: src/digest.c:1221 #, c-format msgid "WARNING: % computed checksum did NOT match" msgid_plural "WARNING: % computed checksums did NOT match" msgstr[0] "AVERTO: % kalkulita kontrolsumo NE kongruas" msgstr[1] "AVERTO: % kalkulitaj kontrolsumoj NE kongruas" #: src/digest.c:1227 #, fuzzy, c-format msgid "%s: no file was verified" msgstr "%s: dosiero havas negativan grandon" #: src/digest.c:1298 #, fuzzy msgid "invalid length" msgstr "nevalida enigaĵo" #: src/digest.c:1302 src/digest.c:1377 #, fuzzy, c-format msgid "invalid length: %s" msgstr "nevalida linia larĝo: %s" #: src/digest.c:1303 msgid "length is not a multiple of 8" msgstr "" #: src/digest.c:1373 msgid "--length is only supported with --algorithm=blake2b" msgstr "" #: src/digest.c:1379 #, c-format msgid "maximum digest length for %s is %d bits" msgstr "" #: src/digest.c:1404 msgid "--check is not supported with --algorithm={bsd,sysv,crc}" msgstr "" #: src/digest.c:1419 #, c-format msgid "--tag does not support --text mode" msgstr "opcioj '--tag' kaj '--text' ne kombineblas" #: src/digest.c:1425 #, fuzzy, c-format #| msgid "the --warn option is meaningful only when verifying checksums" msgid "the --zero option is not supported when verifying checksums" msgstr "opcio '--warn' nur havas sencon dum sumkontrolo" #: src/digest.c:1432 #, c-format msgid "the --tag option is meaningless when verifying checksums" msgstr "opcio '--tag' ne havas sencon dum sumkontrolo" #: src/digest.c:1441 #, c-format msgid "the --binary and --text options are meaningless when verifying checksums" msgstr "opcioj '--binary' kaj '--text' ne havas sencon dum sumkontrolo" #: src/digest.c:1450 #, fuzzy, c-format msgid "the --ignore-missing option is meaningful only when verifying checksums" msgstr "opcio '--warn' nur havas sencon dum sumkontrolo" #: src/digest.c:1458 #, c-format msgid "the --status option is meaningful only when verifying checksums" msgstr "opcio '--status' nur havas sencon dum sumkontrolo" #: src/digest.c:1465 #, c-format msgid "the --warn option is meaningful only when verifying checksums" msgstr "opcio '--warn' nur havas sencon dum sumkontrolo" #: src/digest.c:1472 #, c-format msgid "the --quiet option is meaningful only when verifying checksums" msgstr "opcio '--quiet' nur havas sencon dum sumkontrolo" #: src/digest.c:1479 #, c-format msgid "the --strict option is meaningful only when verifying checksums" msgstr "opcio '--strict' nur havas sencon dum sumkontrolo" #: src/mkdir.c:59 src/rmdir.c:174 #, c-format msgid "Usage: %s [OPTION]... DIRECTORY...\n" msgstr "Uzmaniero: %s [OPCIO...] DOSIERUJO...\n" #: src/mkdir.c:60 msgid "Create the DIRECTORY(ies), if they do not already exist.\n" msgstr "" "Kreas la DOSIERUJO(j)n, se ĝi aŭ ili ne jam ekzistas.\n" "\n" #: src/mkdir.c:66 #, fuzzy #| msgid "" #| " -m, --mode=MODE set file mode (as in chmod), not a=rwx - umask\n" #| " -p, --parents no error if existing, make parent directories as needed\n" #| " -v, --verbose print a message for each created directory\n" msgid "" " -m, --mode=MODE set file mode (as in chmod), not a=rwx - umask\n" " -p, --parents no error if existing, make parent directories as needed,\n" " with their file modes unaffected by any -m option.\n" " -v, --verbose print a message for each created directory\n" msgstr "" " -m, --mode=MODUSO uzendaj permesoj (vidu 'chmod') anstataŭ de 'a=rwx - umask'\n" " -p, --parents ne estas eraro se jam ekzistas, kaj\n" " krei patrajn dosierujojn laŭbezone\n" " -v, --verbose eligi mesaĝon por ĉiu kreita dosierujo\n" #: src/mkdir.c:72 #, fuzzy msgid "" " -Z set SELinux security context of each created directory\n" " to the default type\n" " --context[=CTX] like -Z, or if CTX is specified then set the SELinux\n" " or SMACK security context to CTX\n" msgstr "" " -Z, --context[=KUNTEKSTO] agordi sekurecan kuntekston de ĉiu kreita dosierujo\n" " al defaŭlta tipo, aŭ al KUNTEKSTO se ĝi indikatas\n" #: src/mkdir.c:225 #, c-format msgid "created directory %s" msgstr "kreiĝas dosierujo %s" #: src/mkdir.c:248 src/mkfifo.c:122 src/mknod.c:139 #, c-format msgid "warning: ignoring --context; it requires an SELinux/SMACK-enabled kernel" msgstr "averto: ignoriĝas '--context' (-Z); ĝi bezonas kernon kun SELinux aŭ SMACK" #: src/mkfifo.c:54 src/pathchk.c:88 #, c-format msgid "Usage: %s [OPTION]... NAME...\n" msgstr "Uzmaniero: %s [OPCIO...] NOMO...\n" #: src/mkfifo.c:55 msgid "Create named pipes (FIFOs) with the given NAMEs.\n" msgstr "" "Kreas nomhavajn duktojn (vicmemorojn) kun la indikataj NOMOj.\n" "\n" #: src/mkfifo.c:61 src/mknod.c:63 msgid " -m, --mode=MODE set file permission bits to MODE, not a=rw - umask\n" msgstr " -m, --mode=MODUSO uzendaj permesoj (vidu 'chmod') anstataŭ de 'a=rw - umask'\n" #: src/mkfifo.c:64 src/mknod.c:66 #, fuzzy msgid "" " -Z set the SELinux security context to default type\n" " --context[=CTX] like -Z, or if CTX is specified then set the SELinux\n" " or SMACK security context to CTX\n" msgstr "" " -Z, --context[=KUNTEKSTO] agordi sekurecan kuntekston de ĉiu kreita dosierujo\n" " al defaŭlta tipo, aŭ al KUNTEKSTO se ĝi indikatas\n" #: src/mkfifo.c:159 src/mknod.c:156 msgid "invalid mode" msgstr "nevalida moduso" #: src/mkfifo.c:166 src/mknod.c:163 msgid "mode must specify only file permission bits" msgstr "moduso povas indiki nur permesajn bitojn" #: src/mkfifo.c:180 src/mknod.c:276 #, c-format msgid "cannot set permissions of %s" msgstr "ne eblas agordi permesojn de %s" #: src/mknod.c:55 #, c-format msgid "Usage: %s [OPTION]... NAME TYPE [MAJOR MINOR]\n" msgstr "Uzmaniero: %s [OPCIO...] NOMO TIPO [ĈEFNUMERO KROMNUMERO]\n" #: src/mknod.c:57 msgid "Create the special file NAME of the given TYPE.\n" msgstr "" "Kreas specialan dosieron kun indikata NOMO kaj de indikata TIPO.\n" "\n" #: src/mknod.c:73 msgid "" "\n" "Both MAJOR and MINOR must be specified when TYPE is b, c, or u, and they\n" "must be omitted when TYPE is p. If MAJOR or MINOR begins with 0x or 0X,\n" "it is interpreted as hexadecimal; otherwise, if it begins with 0, as octal;\n" "otherwise, as decimal. TYPE may be:\n" msgstr "" "\n" "ĈEFNUMERO kaj KROMNUMERO ambaŭ indikendas kiam TIPO estas 'b' aŭ 'c' aŭ 'u',\n" "kaj ili forlasendas kiam TIPO estas 'p'. Kiam ĈEFNUMERO aŭ KROMNUMERO komencas\n" "per '0x' aŭ '0X', ĝi interpretiĝas kiel deksesuma; alie, se ĝi komencas per '0',\n" "kiel okuma; alie, kiel dekuma. TIPO povas esti:\n" #: src/mknod.c:80 msgid "" "\n" " b create a block (buffered) special file\n" " c, u create a character (unbuffered) special file\n" " p create a FIFO\n" msgstr "" "\n" " b krei blokan specialan dosieron (bufritan)\n" " c, u krei signan specialan dosieron (nebufritan)\n" " p krei vicmemoron ('FIFO'-n)\n" #: src/mknod.c:181 msgid "Special files require major and minor device numbers." msgstr "Specialaj dosieroj postulas ĉefajn kaj kromajn aparatnumerojn." #: src/mknod.c:191 msgid "Fifos do not have major and minor device numbers." msgstr "Vicmemoro ('FIFO') ne havas ĉefan kaj kroman aparatnumeron." #: src/mknod.c:216 msgid "block special files not supported" msgstr "blokaparatdosieroj ne subtenatas" #: src/mknod.c:225 msgid "character special files not supported" msgstr "signoaparatdosieroj ne subtenatas" #: src/mknod.c:241 #, c-format msgid "invalid major device number %s" msgstr "nevalida ĉefa aparatnumero %s" #: src/mknod.c:246 #, c-format msgid "invalid minor device number %s" msgstr "nevalida kroma aparatnumero %s" #: src/mknod.c:251 #, c-format msgid "invalid device %s %s" msgstr "nevalida aparato %s %s" #: src/mknod.c:271 #, c-format msgid "invalid device type %s" msgstr "nevalida aparattipo %s" #. This is a proper name. See the gettext manual, section Names. #: src/mktemp.c:37 msgid "Eric Blake" msgstr "Erik BLEJK (Eric Blake)" #: src/mktemp.c:67 #, c-format msgid "Usage: %s [OPTION]... [TEMPLATE]\n" msgstr "Uzmaniero: %s [OPCIO...] [ŜABLONO]\n" #: src/mktemp.c:68 msgid "" "Create a temporary file or directory, safely, and print its name.\n" "TEMPLATE must contain at least 3 consecutive 'X's in last component.\n" "If TEMPLATE is not specified, use tmp.XXXXXXXXXX, and --tmpdir is implied.\n" msgstr "" #: src/mktemp.c:73 msgid "Files are created u+rw, and directories u+rwx, minus umask restrictions.\n" msgstr "" #: src/mktemp.c:77 msgid "" " -d, --directory create a directory, not a file\n" " -u, --dry-run do not create anything; merely print a name (unsafe)\n" " -q, --quiet suppress diagnostics about file/dir-creation failure\n" msgstr "" #: src/mktemp.c:82 msgid "" " --suffix=SUFF append SUFF to TEMPLATE; SUFF must not contain a slash.\n" " This option is implied if TEMPLATE does not end in X\n" msgstr "" #: src/mktemp.c:86 msgid "" " -p DIR, --tmpdir[=DIR] interpret TEMPLATE relative to DIR; if DIR is not\n" " specified, use $TMPDIR if set, else /tmp. With\n" " this option, TEMPLATE must not be an absolute name;\n" " unlike with -t, TEMPLATE may contain slashes, but\n" " mktemp creates only the final component\n" msgstr "" #: src/mktemp.c:93 msgid "" " -t interpret TEMPLATE as a single file name component,\n" " relative to a directory: $TMPDIR, if set; else the\n" " directory specified via -p; else /tmp [deprecated]\n" msgstr "" #: src/mktemp.c:211 #, c-format msgid "too many templates" msgstr "tro multaj ŝablonoj" #: src/mktemp.c:231 #, c-format msgid "with --suffix, template %s must end in X" msgstr "kun opcio '--suffix', ŝablono %s devas fini per X" #: src/mktemp.c:256 src/split.c:1348 #, c-format msgid "invalid suffix %s, contains directory separator" msgstr "nevalida sufikso %s; ĝi enhavas apartigilon de dosierujoj" #: src/mktemp.c:261 #, c-format msgid "too few X's in template %s" msgstr "tro malmultaj X en ŝablono %s" #: src/mktemp.c:277 #, c-format msgid "invalid template, %s, contains directory separator" msgstr "nevalida ŝablono %s; ĝi enhavas apartigilon de dosierujoj" #: src/mktemp.c:291 #, c-format msgid "invalid template, %s; with --tmpdir, it may not be absolute" msgstr "nevalida ŝablono %s; kun opcio '--tmpdir' ĝi ne rajtas esti absoluta" #: src/mktemp.c:312 #, c-format msgid "failed to create directory via template %s" msgstr "malsukcesis krei dosierujon tra ŝablono %s" #: src/mktemp.c:323 #, c-format msgid "failed to create file via template %s" msgstr "malsukcesis krei dosieron tra ŝablono %s" #: src/mv.c:298 msgid "Rename SOURCE to DEST, or move SOURCE(s) to DIRECTORY.\n" msgstr "" "Alinomas ORIGINOn al CELO, aŭ translokas ORIGINO(j)n al DOSIERUJO.\n" "\n" #: src/mv.c:304 #, fuzzy msgid "" " --backup[=CONTROL] make a backup of each existing destination file\n" " -b like --backup but does not accept an argument\n" " -f, --force do not prompt before overwriting\n" " -i, --interactive prompt before overwrite\n" " -n, --no-clobber do not overwrite an existing file\n" "If you specify more than one of -i, -f, -n, only the final one takes effect.\n" msgstr "" " --backup[=METODO] fari savkopion de ĉiu ekzistanta celdosiero\n" " -b kiel «--backup», sed ne akceptas argumenton\n" #: src/mv.c:313 msgid "" " --strip-trailing-slashes remove any trailing slashes from each SOURCE\n" " argument\n" " -S, --suffix=SUFFIX override the usual backup suffix\n" msgstr "" #: src/mv.c:318 msgid "" " -t, --target-directory=DIRECTORY move all SOURCE arguments into DIRECTORY\n" " -T, --no-target-directory treat DEST as a normal file\n" " -u, --update move only when the SOURCE file is newer\n" " than the destination file or when the\n" " destination file is missing\n" " -v, --verbose explain what is being done\n" " -Z, --context set SELinux security context of destination\n" " file to default type\n" msgstr "" " -t, --target-directory=DOSIERUJO movi ĉiujn ORIGINOjn ene al DOSIERUJO\n" " -T, --no-target-directory trakti CELOn kiel normalan dosieron\n" " -u, --update movi nur kiam la ORIGINO estas pli nova ol\n" " la celdosiero aŭ kiam la celdosiero mankas\n" " -v, --verbose montri nomon de ĉiu dosiero antaŭ ol movi ĝin\n" " -Z, --context agordi sekurecan kuntekston de celdosiero al\n" " defaŭlta tipo\n" #: src/nice.c:73 #, c-format msgid "Usage: %s [OPTION] [COMMAND [ARG]...]\n" msgstr "Uzmaniero: %s [OPCIO] [KOMANDO [ARGUMENTO...]]\n" #: src/nice.c:74 #, c-format msgid "" "Run COMMAND with an adjusted niceness, which affects process scheduling.\n" "With no COMMAND, print the current niceness. Niceness values range from\n" "%d (most favorable to the process) to %d (least favorable to the process).\n" msgstr "" "Rulas KOMANDOn kun ŝanĝita afableco, kiu afektas procezan planadon.\n" "Sen iu KOMANDO, la nuna afableco eligiĝas. Afablecoj etendiĝas de\n" "%d (plej favora planado) al %d (malplej favora).\n" "\n" #: src/nice.c:83 msgid " -n, --adjustment=N add integer N to the niceness (default 10)\n" msgstr " -n, --adjustment=N aldoni entjeron N al la afableco (defaŭlte 10)\n" #: src/nice.c:173 #, c-format msgid "invalid adjustment %s" msgstr "nevalida alĝustigo %s" #: src/nice.c:182 #, c-format msgid "a command must be given with an adjustment" msgstr "kune kun ĝustigo endas indiki komandon" #: src/nice.c:189 src/nice.c:200 msgid "cannot get niceness" msgstr "ne eblas eltrovi afablecon" #: src/nice.c:206 #, c-format msgid "cannot set niceness" msgstr "ne eblas agordi afablecon" #. This is a proper name. See the gettext manual, section Names. #: src/nl.c:41 msgid "Scott Bartram" msgstr "Skot BARTREM (Scott Bartram)" #: src/nl.c:183 #, fuzzy msgid "Write each FILE to standard output, with line numbers added.\n" msgstr "" "Skribas kun inversa liniordo ĉiun indikatan DOSIEROn al ĉefeligujo.\n" "Sen DOSIERO, aŭ kiam DOSIERO estas «-», ĉefenigujo legiĝas.\n" #: src/nl.c:190 msgid "" " -b, --body-numbering=STYLE use STYLE for numbering body lines\n" " -d, --section-delimiter=CC use CC for logical page delimiters\n" " -f, --footer-numbering=STYLE use STYLE for numbering footer lines\n" msgstr "" #: src/nl.c:195 msgid "" " -h, --header-numbering=STYLE use STYLE for numbering header lines\n" " -i, --line-increment=NUMBER line number increment at each line\n" " -l, --join-blank-lines=NUMBER group of NUMBER empty lines counted as one\n" " -n, --number-format=FORMAT insert line numbers according to FORMAT\n" " -p, --no-renumber do not reset line numbers for each section\n" " -s, --number-separator=STRING add STRING after (possible) line number\n" msgstr "" #: src/nl.c:203 msgid "" " -v, --starting-line-number=NUMBER first line number for each section\n" " -w, --number-width=NUMBER use NUMBER columns for line numbers\n" msgstr "" #: src/nl.c:209 msgid "" "\n" "Default options are: -bt -d'\\:' -fn -hn -i1 -l1 -n'rn' -s -v1 -w6\n" "\n" "CC are two delimiter characters used to construct logical page delimiters;\n" "a missing second character implies ':'. As a GNU extension one can specify\n" "more than two characters, and also specifying the empty string (-d '')\n" "disables section matching.\n" msgstr "" #: src/nl.c:218 msgid "" "\n" "STYLE is one of:\n" "\n" " a number all lines\n" " t number only nonempty lines\n" " n number no lines\n" " pBRE number only lines that contain a match for the basic regular\n" " expression, BRE\n" msgstr "" #: src/nl.c:228 msgid "" "\n" "FORMAT is one of:\n" "\n" " ln left justified, no leading zeros\n" " rn right justified, no leading zeros\n" " rz right justified, leading zeros\n" "\n" msgstr "" #: src/nl.c:284 msgid "line number overflow" msgstr "troo de lininumero" #: src/nl.c:500 #, c-format msgid "invalid header numbering style: %s" msgstr "nevalida stilo por numeri kapliniojn: %s" #: src/nl.c:508 #, c-format msgid "invalid body numbering style: %s" msgstr "nevalida stilo por numeri korpliniojn: %s" #: src/nl.c:516 #, c-format msgid "invalid footer numbering style: %s" msgstr "nevalida stilo por numeri piedliniojn: %s" #: src/nl.c:523 #, fuzzy msgid "invalid starting line number" msgstr "nevalida komenca lininumero: %s" #: src/nl.c:528 #, fuzzy msgid "invalid line number increment" msgstr "nevalida lininumera alkremento: %s" #: src/nl.c:535 #, fuzzy msgid "invalid line number of blank lines" msgstr "nevalida nombro da malplenaj linioj: %s" #: src/nl.c:542 #, fuzzy msgid "invalid line number field width" msgstr "nevalida lininumera kampgrando: %s" #: src/nl.c:553 #, c-format msgid "invalid line numbering format: %s" msgstr "nevalida lininumera aranĝo: %s" #: src/nohup.c:50 #, c-format msgid "" "Usage: %s COMMAND [ARG]...\n" " or: %s OPTION\n" msgstr "" "Uzmaniero: %s KOMANDO [ARGUMENTO...]\n" " aŭ: %s OPCIO\n" #: src/nohup.c:56 msgid "" "Run COMMAND, ignoring hangup signals.\n" "\n" msgstr "" "Rulas KOMANDOn, ignorante ajnajn 'hangup'-signalojn.\n" "\n" #: src/nohup.c:62 #, fuzzy, c-format msgid "" "\n" "If standard input is a terminal, redirect it from an unreadable file.\n" "If standard output is a terminal, append output to 'nohup.out' if possible,\n" "'$HOME/nohup.out' otherwise.\n" "If standard error is a terminal, redirect it to standard output.\n" "To save output to FILE, use '%s COMMAND > FILE'.\n" msgstr "" "\n" "Se ĉefenigujo estas terminalo, alidirekti ĝin de «/dev/null».\n" "Se ĉefeligujo estas terminalo, aldoni eligon al dosiero «nohup.out», se eblas,\n" "alie al «$HOME/nohup.out»\n" "Se ĉeferar-eliguo estas terminalo, alidirekti ĝin al ĉefeligujo.\n" "Por savi la eligon al DOSIERO, uzu «%s KOMANDO > DOSIERO».\n" #: src/nohup.c:123 #, c-format msgid "failed to render standard input unusable" msgstr "malsukcesis fari ĉefenigujon neuzebla" #: src/nohup.c:125 #, c-format msgid "ignoring input" msgstr "enigo ignoratas" #: src/nohup.c:169 #, c-format msgid "ignoring input and appending output to %s" msgstr "enigo ignoratas, kaj eligo aldoniĝas al %s" #: src/nohup.c:170 #, c-format msgid "appending output to %s" msgstr "eligo aldoniĝas al %s" #: src/nohup.c:188 #, c-format msgid "ignoring input and redirecting stderr to stdout" msgstr "enigo ignoratas, kaj ĉeferar-eligujo alidirektiĝas al ĉefeligujo" #: src/nohup.c:189 #, c-format msgid "redirecting stderr to stdout" msgstr "ĉeferar-eligujo alidirektiĝas al ĉefeligujo" #: src/nohup.c:193 #, c-format msgid "failed to redirect standard error" msgstr "malsukcesis alidirektigi ĉeferar-eligujon" #. This is a proper name. See the gettext manual, section Names. #: src/nproc.c:33 src/sync.c:34 msgid "Giuseppe Scrivano" msgstr "Ĝusepe SKRIVANO (Giuseppe Scrivano)" #: src/nproc.c:57 src/pwd.c:57 src/tty.c:65 src/uname.c:121 src/whoami.c:44 #, c-format msgid "Usage: %s [OPTION]...\n" msgstr "Uzmaniero: %s [OPCIO...]\n" #: src/nproc.c:58 msgid "" "Print the number of processing units available to the current process,\n" "which may be less than the number of online processors\n" "\n" msgstr "" "Eligi nombron de procesoraj unuoj kiuj disponeblas al la nuna procezo,\n" "kiu povas esti malpli ol la nombro de aktivaj procesoroj.\n" "\n" #: src/nproc.c:63 #, fuzzy #| msgid "" #| " --all print the number of installed processors\n" #| " --ignore=N if possible, exclude N processing units\n" msgid "" " --all print the number of installed processors\n" " --ignore=N if possible, exclude N processing units\n" msgstr "" " --all eligi la nombron de instalitaj procesoroj\n" " --ignore=NOMBRO se eblas, ekskluzivi NOMBROn de procesoraj unuoj\n" #: src/numfmt.c:693 #, c-format msgid "value too large to be converted: %s" msgstr "valoro tro grandas por konverti: %s" #: src/numfmt.c:697 #, c-format msgid "invalid number: %s" msgstr "nevalida nombro: %s" #: src/numfmt.c:701 #, c-format msgid "rejecting suffix in input: %s (consider using --from)" msgstr "sufikso en enigo rifuziĝis: %s (konsideru uzon de «--from»)" #: src/numfmt.c:705 #, c-format msgid "invalid suffix in input: %s" msgstr "nevalida sufikso en enigo: %s" # FIXME: mankas punkto post e.g #: src/numfmt.c:709 #, c-format msgid "missing 'i' suffix in input: %s (e.g Ki/Mi/Gi)" msgstr "mankas sufikso «i» en enigo: %s (ekzemple Ki/Mi/Gi)" #: src/numfmt.c:756 src/numfmt.c:808 #, c-format msgid "failed to prepare value '%Lf' for printing" msgstr "malsukcesis prepari valoron '%Lf' por montrado" #: src/numfmt.c:857 #, c-format msgid "invalid unit size: %s" msgstr "nevalida unueca grando: %s" #: src/numfmt.c:883 #, fuzzy, c-format msgid "Usage: %s [OPTION]... [NUMBER]...\n" msgstr "Uzmaniero: %s [OPCIO...] [NOMBRO...]\n" #: src/numfmt.c:886 msgid "Reformat NUMBER(s), or the numbers from standard input if none are specified.\n" msgstr "" #: src/numfmt.c:890 msgid " --debug print warnings about invalid input\n" msgstr " --debug montri avertojn je nevalida enigo\n" #: src/numfmt.c:893 msgid " -d, --delimiter=X use X instead of whitespace for field delimiter\n" msgstr "" #: src/numfmt.c:896 msgid "" " --field=FIELDS replace the numbers in these input fields (default=1);\n" " see FIELDS below\n" msgstr "" #: src/numfmt.c:900 msgid "" " --format=FORMAT use printf style floating-point FORMAT;\n" " see FORMAT below for details\n" msgstr "" #: src/numfmt.c:904 msgid "" " --from=UNIT auto-scale input numbers to UNITs; default is 'none';\n" " see UNIT below\n" msgstr "" #: src/numfmt.c:908 msgid " --from-unit=N specify the input unit size (instead of the default 1)\n" msgstr "" #: src/numfmt.c:911 msgid "" " --grouping use locale-defined grouping of digits, e.g. 1,000,000\n" " (which means it has no effect in the C/POSIX locale)\n" msgstr "" #: src/numfmt.c:915 msgid "" " --header[=N] print (without converting) the first N header lines;\n" " N defaults to 1 if not specified\n" msgstr "" #: src/numfmt.c:919 msgid "" " --invalid=MODE failure mode for invalid numbers: MODE can be:\n" " abort (default), fail, warn, ignore\n" msgstr "" #: src/numfmt.c:923 msgid "" " --padding=N pad the output to N characters; positive N will\n" " right-align; negative N will left-align;\n" " padding is ignored if the output is wider than N;\n" " the default is to automatically pad if a whitespace\n" " is found\n" msgstr "" #: src/numfmt.c:930 msgid "" " --round=METHOD use METHOD for rounding when scaling; METHOD can be:\n" " up, down, from-zero (default), towards-zero, nearest\n" msgstr "" #: src/numfmt.c:934 msgid "" " --suffix=SUFFIX add SUFFIX to output numbers, and accept optional\n" " SUFFIX in input numbers\n" msgstr "" #: src/numfmt.c:938 msgid " --to=UNIT auto-scale output numbers to UNITs; see UNIT below\n" msgstr "" #: src/numfmt.c:941 msgid " --to-unit=N the output unit size (instead of the default 1)\n" msgstr "" #: src/numfmt.c:950 #, fuzzy msgid "" "\n" "UNIT options:\n" msgstr "" "Aliaj opcioj:\n" "\n" #: src/numfmt.c:953 msgid " none no auto-scaling is done; suffixes will trigger an error\n" msgstr "" #: src/numfmt.c:956 msgid "" " auto accept optional single/two letter suffix:\n" " 1K = 1000,\n" " 1Ki = 1024,\n" " 1M = 1000000,\n" " 1Mi = 1048576,\n" msgstr "" #: src/numfmt.c:962 msgid "" " si accept optional single letter suffix:\n" " 1K = 1000,\n" " 1M = 1000000,\n" " ...\n" msgstr "" #: src/numfmt.c:967 msgid "" " iec accept optional single letter suffix:\n" " 1K = 1024,\n" " 1M = 1048576,\n" " ...\n" msgstr "" #: src/numfmt.c:972 msgid "" " iec-i accept optional two-letter suffix:\n" " 1Ki = 1024,\n" " 1Mi = 1048576,\n" " ...\n" msgstr "" #: src/numfmt.c:978 #, fuzzy msgid "" "\n" "FIELDS supports cut(1) style field ranges:\n" " N N'th field, counted from 1\n" " N- from N'th field, to end of line\n" " N-M from N'th to M'th field (inclusive)\n" " -M from first to M'th field (inclusive)\n" " - all fields\n" "Multiple fields/ranges can be separated with commas\n" msgstr "" "Ĉiu gamo povas esti unu el:\n" "\n" " N la N-a bajto, signo aŭ kampo, numerata ekde 1\n" " N- de la N-a bajto, signo aŭ kampo, ĝis la fino de la linio\n" " N-M de la N-a al la M-a (inkluzive) bajto, signo aŭ kampo\n" " -M de la unua ĝis la M-a (inkluzive) bajto, signo aŭ kampo\n" "\n" "Sen DOSIERO, aŭ kiam DOSIERO estas «-», ĉefenigujo legiĝas.\n" #: src/numfmt.c:988 #, c-format msgid "" "\n" "FORMAT must be suitable for printing one floating-point argument '%f'.\n" "Optional quote (%'f) will enable --grouping (if supported by current locale).\n" "Optional width value (%10f) will pad output. Optional zero (%010f) width\n" "will zero pad the number. Optional negative values (%-10f) will left align.\n" "Optional precision (%.1f) will override the input determined precision.\n" msgstr "" #: src/numfmt.c:996 #, c-format msgid "" "\n" "Exit status is 0 if all input numbers were successfully converted.\n" "By default, %s will stop at the first conversion error with exit status 2.\n" "With --invalid='fail' a warning is printed for each conversion error\n" "and the exit status is 2. With --invalid='warn' each conversion error is\n" "diagnosed, but the exit status is 0. With --invalid='ignore' conversion\n" "errors are not diagnosed and the exit status is 0.\n" msgstr "" #: src/numfmt.c:1005 #, c-format msgid "" "\n" "Examples:\n" " $ %s --to=si 1000\n" " -> \"1.0K\"\n" " $ %s --to=iec 2048\n" " -> \"2.0K\"\n" " $ %s --to=iec-i 4096\n" " -> \"4.0Ki\"\n" " $ echo 1K | %s --from=si\n" " -> \"1000\"\n" " $ echo 1K | %s --from=iec\n" " -> \"1024\"\n" " $ df -B1 | %s --header --field 2-4 --to=si\n" " $ ls -l | %s --header --field 5 --to=iec\n" " $ ls -lh | %s --header --field 5 --from=iec --padding=10\n" " $ ls -lh | %s --header --field 5 --from=iec --format %%10f\n" msgstr "" #: src/numfmt.c:1058 src/seq.c:248 #, c-format msgid "format %s has no %% directive" msgstr "aranĝo %s ne enhavas %%-indikon" #: src/numfmt.c:1085 #, c-format msgid "invalid format %s (width overflow)" msgstr "nevalida aranĝo %s (troo de larĝo)" #: src/numfmt.c:1090 #, fuzzy, c-format msgid "--format padding overriding --padding" msgstr "ŝtopado de «--format» transpasas «--padding»" #: src/numfmt.c:1109 src/seq.c:265 #, c-format msgid "format %s ends in %%" msgstr "aranĝo %s finiĝas per %%" #: src/numfmt.c:1125 #, fuzzy, c-format msgid "invalid precision in format %s" msgstr "nevalida precizo: %s" #: src/numfmt.c:1131 #, fuzzy, c-format msgid "invalid format %s, directive must be %%[0]['][-][N][.][N]f" msgstr "nevalida aranĝo %s; indiko devas esti «%%[0]['][-][N]f»" #: src/numfmt.c:1139 src/seq.c:272 #, c-format msgid "format %s has too many %% directives" msgstr "aranĝo %s enhavas tro multajn %%-indikojn" #: src/numfmt.c:1182 #, c-format msgid "invalid suffix in input %s: %s" msgstr "nevalida sufikso en enigo %s: %s" #: src/numfmt.c:1211 #, fuzzy, c-format msgid "value/precision too large to be printed: '%Lg/%' (consider using --to)" msgstr "valoro tro grandas por montri: '%Lg' (pripensu uzi «--to»)" #: src/numfmt.c:1215 #, c-format msgid "value too large to be printed: '%Lg' (consider using --to)" msgstr "valoro tro grandas por montri: '%Lg' (pripensu uzi «--to»)" #: src/numfmt.c:1224 #, c-format msgid "value too large to be printed: '%Lg' (cannot handle values > 999Y)" msgstr "valoro tro grandas por montri: '%Lg' (valoroj > 999Y ne trakteblas)" #: src/numfmt.c:1310 #, c-format msgid "large input value %s: possible precision loss" msgstr "granda eniga valoro %s: eblas perdo de precizeco" #: src/numfmt.c:1499 #, c-format msgid "invalid padding value %s" msgstr "nevalida ŝtopvaloro %s" #: src/numfmt.c:1512 #, fuzzy msgid "multiple field specifications" msgstr "%s: nevalida kampindiko %s" #: src/numfmt.c:1546 #, c-format msgid "invalid header value %s" msgstr "nevalida ĉapvaloro %s" #: src/numfmt.c:1573 msgid "--grouping cannot be combined with --format" msgstr "nekombineblas opcioj «--grouping» kaj «--format»" #: src/numfmt.c:1576 src/sort.c:4685 #, fuzzy, c-format msgid "failed to set locale" msgstr "malsukcesis agordi novan rolon %s" #: src/numfmt.c:1581 #, c-format msgid "no conversion option specified" msgstr "neniu konverta opcio indikatas" #: src/numfmt.c:1589 msgid "grouping cannot be combined with --to" msgstr "nekombineblas opcioj «--grouping» kaj «--to»" #: src/numfmt.c:1591 #, c-format msgid "grouping has no effect in this locale" msgstr "grupado ne havas efekton en tiu ĉi lokaĵo" #: src/numfmt.c:1604 #, c-format msgid "--header ignored with command-line input" msgstr "opcio «--header» ignoratas sen komandlinia enigo" #: src/numfmt.c:1631 #, c-format msgid "error reading input" msgstr "eraro dum legado de enigo" #: src/numfmt.c:1642 #, c-format msgid "failed to convert some of the input numbers" msgstr "malsukcesis konverti kelkajn enigajn nombrojn" #: src/od.c:323 #, c-format msgid "" "Usage: %s [OPTION]... [FILE]...\n" " or: %s [-abcdfilosx]... [FILE] [[+]OFFSET[.][b]]\n" " or: %s --traditional [OPTION]... [FILE] [[+]OFFSET[.][b] [+][LABEL][.][b]]\n" msgstr "" "Uzmaniero: %s [OPCIO...] [DOSIERO...]\n" " aŭ: %s [-abcdfilosx] [DOSIERO... [[+]DEŜOVO[.][b]]\n" " aŭ: %s --traditional [OPCIO...] [DOSIERO] [[+]DEŜOVO[.][b]] [[+]ETIKEDO[.][b]]\n" #: src/od.c:329 #, fuzzy msgid "" "\n" "Write an unambiguous representation, octal bytes by default,\n" "of FILE to standard output. With more than one FILE argument,\n" "concatenate them in the listed order to form the input.\n" msgstr "" "\n" "Eligas neambiguan reprezenton (per okumaj bajtoj defaŭlte)\n" "de DOSIERO al ĉefeligujo. Kun pli ol unu DOSIERO,\n" "ili kunmetiĝas en la indikata ordo por formi la enigon.\n" "Sen DOSIERO, aŭ kiam DOSIERO estas «-», ĉefenigujo legiĝas.\n" #: src/od.c:337 msgid "" "\n" "If first and second call formats both apply, the second format is assumed\n" "if the last operand begins with + or (if there are 2 operands) a digit.\n" "An OFFSET operand means -j OFFSET. LABEL is the pseudo-address\n" "at first byte printed, incremented when dump is progressing.\n" "For OFFSET and LABEL, a 0x or 0X prefix indicates hexadecimal;\n" "suffixes may be . for octal and b for multiply by 512.\n" msgstr "" #: src/od.c:349 msgid "" " -A, --address-radix=RADIX output format for file offsets; RADIX is one\n" " of [doxn], for Decimal, Octal, Hex or None\n" " --endian={big|little} swap input bytes according the specified order\n" " -j, --skip-bytes=BYTES skip BYTES input bytes first\n" msgstr "" #: src/od.c:355 msgid "" " -N, --read-bytes=BYTES limit dump to BYTES input bytes\n" " -S BYTES, --strings[=BYTES] output strings of at least BYTES graphic chars;\n" " 3 is implied when BYTES is not specified\n" " -t, --format=TYPE select output format or formats\n" " -v, --output-duplicates do not use * to mark line suppression\n" " -w[BYTES], --width[=BYTES] output BYTES bytes per output line;\n" " 32 is implied when BYTES is not specified\n" " --traditional accept arguments in third form above\n" msgstr "" #: src/od.c:368 msgid "" "\n" "\n" "Traditional format specifications may be intermixed; they accumulate:\n" " -a same as -t a, select named characters, ignoring high-order bit\n" " -b same as -t o1, select octal bytes\n" " -c same as -t c, select printable characters or backslash escapes\n" " -d same as -t u2, select unsigned decimal 2-byte units\n" msgstr "" #: src/od.c:377 msgid "" " -f same as -t fF, select floats\n" " -i same as -t dI, select decimal ints\n" " -l same as -t dL, select decimal longs\n" " -o same as -t o2, select octal 2-byte units\n" " -s same as -t d2, select decimal 2-byte units\n" " -x same as -t x2, select hexadecimal 2-byte units\n" msgstr "" #: src/od.c:385 msgid "" "\n" "\n" "TYPE is made up of one or more of these specifications:\n" " a named character, ignoring high-order bit\n" " c printable character or backslash escape\n" msgstr "" #: src/od.c:392 msgid "" " d[SIZE] signed decimal, SIZE bytes per integer\n" " f[SIZE] floating point, SIZE bytes per float\n" " o[SIZE] octal, SIZE bytes per integer\n" " u[SIZE] unsigned decimal, SIZE bytes per integer\n" " x[SIZE] hexadecimal, SIZE bytes per integer\n" msgstr "" #: src/od.c:399 msgid "" "\n" "SIZE is a number. For TYPE in [doux], SIZE may also be C for\n" "sizeof(char), S for sizeof(short), I for sizeof(int) or L for\n" "sizeof(long). If TYPE is f, SIZE may also be F for sizeof(float), D\n" "for sizeof(double) or L for sizeof(long double).\n" msgstr "" #: src/od.c:406 msgid "" "\n" "Adding a z suffix to any type displays printable characters at the end of\n" "each output line.\n" msgstr "" #: src/od.c:411 #, fuzzy #| msgid "" #| "\n" #| "\n" #| "BYTES is hex with 0x or 0X prefix, and may have a multiplier suffix:\n" #| " b 512\n" #| " KB 1000\n" #| " K 1024\n" #| " MB 1000*1000\n" #| " M 1024*1024\n" #| "and so on for G, T, P, E, Z, Y.\n" msgid "" "\n" "\n" "BYTES is hex with 0x or 0X prefix, and may have a multiplier suffix:\n" " b 512\n" " KB 1000\n" " K 1024\n" " MB 1000*1000\n" " M 1024*1024\n" "and so on for G, T, P, E, Z, Y.\n" "Binary prefixes can be used, too: KiB=K, MiB=M, and so on.\n" msgstr "" "\n" "NOMBRO estas deksesuma kiam ĝi havas prefikson «0x» aŭ «0X»,\n" "kaj ĝi povas havi obligilan sufikson:\n" " b = 512, kB = 1000, K = 1024, MB = 1000*1000, M = 1024*1024,\n" " GB = 1000*1000*1000, G = 1024*1024*1024, ktp por T, P, E, Z, Y.\n" #: src/od.c:685 src/od.c:805 #, c-format msgid "invalid type string %s" msgstr "nevalida tipa ĉeno: %s" #: src/od.c:695 #, c-format msgid "" "invalid type string %s;\n" "this system doesn't provide a %lu-byte integral type" msgstr "" "nevalida tipa ĉeno: %s\n" "ĉi tiu sistemo ne provizas entjertipon de %lu bajtoj" #: src/od.c:816 #, c-format msgid "" "invalid type string %s;\n" "this system doesn't provide a %lu-byte floating point type" msgstr "" "nevalida tipa ĉeno: %s\n" "ĉi tiu sistemo ne provizas glitkomtipon de %lu bajtoj" #: src/od.c:874 #, c-format msgid "invalid character '%c' in type string %s" msgstr "nevalida signo '%c' en tipa ĉeno %s" #: src/od.c:1109 msgid "cannot skip past end of combined input" msgstr "maleblas transsalti la finon de kombinata enigo" #: src/od.c:1659 #, c-format msgid "invalid output address radix '%c'; it must be one character from [doxn]" msgstr "nevalida eligadresa bazo '%c'; ĝi devas esti unu signo el [doxn]" #: src/od.c:1696 src/od.c:1777 #, c-format msgid "%s is too large" msgstr "%s estas tro granda" #: src/od.c:1797 msgid "no type may be specified when dumping strings" msgstr "ne eblas indiki tipon kiam ŝutendas ĉenoj" #: src/od.c:1872 msgid "compatibility mode supports at most one file" msgstr "kongrua moduso permesas maksimume unu dosieron" #: src/od.c:1893 msgid "skip-bytes + read-bytes is too large" msgstr "la sumo de la argumentoj de '-j' kaj '-N' tro grandas" #: src/od.c:1936 #, c-format msgid "warning: invalid width %lu; using %d instead" msgstr "averto: nevalida larĝo %lu; uzatas %d anstataŭe" #: src/paste.c:222 msgid "standard input is closed" msgstr "ĉefenigujo fermitas" #: src/paste.c:438 #, fuzzy msgid "" "Write lines consisting of the sequentially corresponding lines from\n" "each FILE, separated by TABs, to standard output.\n" msgstr "" "Skribas liniojn kiuj konsistas de la kungluo de la sekve korespondaj linioj\n" "de ĉiu indikata DOSIERO, disigitaj per TABOJ, al ĉefeligujo.\n" "\n" "Sen DOSIERO, aŭ kiam DOSIERO estas «-», ĉefenigujo legiĝas.\n" #: src/paste.c:446 msgid "" " -d, --delimiters=LIST reuse characters from LIST instead of TABs\n" " -s, --serial paste one file at a time instead of in parallel\n" msgstr "" " -d, --delimiters=LISTO uzi la signojn el tiu LISTO anstataŭ tabojn\n" " -s, --serial alglui unu dosieron pofoje anstataŭ ĉiujn paralele\n" #: src/paste.c:516 #, c-format msgid "delimiter list ends with an unescaped backslash: %s" msgstr "listo de disigiloj finas per nuda malsuprenstreko: %s" #: src/pathchk.c:89 msgid "" "Diagnose invalid or unportable file names.\n" "\n" " -p check for most POSIX systems\n" " -P check for empty names and leading \"-\"\n" " --portability check for all POSIX systems (equivalent to -p -P)\n" msgstr "" "Diagnozas nevalidajn aŭ neporteblajn dosiernomojn.\n" "\n" " -p fari kontrolon por la plejmulto de POSIX-sistemoj\n" " -P kontroli ankaŭ je vakaj nomoj kaj komencaj «-»\n" " --portability fari kontrolon por ĉiuj POSIX-sistemoj (egalas al '-p -P')\n" #: src/pathchk.c:169 #, c-format msgid "leading '-' in a component of file name %s" msgstr "komenca '-' en ero de dosiernomo %s" #: src/pathchk.c:195 #, c-format msgid "nonportable character %s in file name %s" msgstr "neportebla signo %s en dosiernomo %s" #: src/pathchk.c:271 #, c-format msgid "empty file name" msgstr "vaka dosiernomo" #: src/pathchk.c:313 #, c-format msgid "%s: unable to determine maximum file name length" msgstr "%s: ne eblas eltrovi maksimuman longecon de dosiernomo" #: src/pathchk.c:324 #, c-format msgid "limit %lu exceeded by length %lu of file name %s" msgstr "limon %lu transpasas longeco %lu de dosiernomo %s" #: src/pathchk.c:410 #, c-format msgid "limit %lu exceeded by length %lu of file name component %s" msgstr "limon %lu transpasas longeco %lu de dosiernomero %s" #. This is a proper name. See the gettext manual, section Names. #: src/pinky.c:37 src/uptime.c:45 src/users.c:35 src/who.c:50 msgid "Joseph Arceneaux" msgstr "Ĝosef ARSENO (Joseph Arceneaux)" #. This is a proper name. See the gettext manual, section Names. #: src/pinky.c:39 src/uptime.c:47 msgid "Kaveh Ghazi" msgstr "Kave GAZI (Kaveh Ghazi)" #. TRANSLATORS: Real name is unknown; at most 19 characters. #: src/pinky.c:241 msgid " ???" msgstr " (nekonata)" #. TRANSLATORS: Idle time is unknown; at most 5 characters. #: src/pinky.c:265 msgid "?????" msgstr "-----" #: src/pinky.c:313 #, c-format msgid "Login name: " msgstr "Ensaluta nomo: " #: src/pinky.c:316 #, c-format msgid "In real life: " msgstr "Vera nomo: " #. TRANSLATORS: Real name is unknown; no hard limit. #: src/pinky.c:320 msgid "???\n" msgstr "(nekonata)\n" #: src/pinky.c:340 #, c-format msgid "Directory: " msgstr "Dosierujo: " #: src/pinky.c:342 #, c-format msgid "Shell: " msgstr "Ŝelo: " #: src/pinky.c:361 #, c-format msgid "Project: " msgstr "Projekto: " #: src/pinky.c:385 #, c-format msgid "Plan:\n" msgstr "Plano:\n" #: src/pinky.c:404 msgid "Login" msgstr "Saluto" #: src/pinky.c:406 msgid "Name" msgstr "Nomo" #: src/pinky.c:407 msgid " TTY" msgstr " TTY" #: src/pinky.c:409 msgid "Idle" msgstr "Vakas" #: src/pinky.c:410 msgid "When" msgstr "Ensalutis" #: src/pinky.c:413 msgid "Where" msgstr "Kie" #: src/pinky.c:490 msgid "" "\n" " -l produce long format output for the specified USERs\n" " -b omit the user's home directory and shell in long format\n" " -h omit the user's project file in long format\n" " -p omit the user's plan file in long format\n" " -s do short format output, this is the default\n" msgstr "" "\n" " -l produkti eligon en longa aranĝo por la indikata(j) UZANTO(j)\n" " -b forlasi hejman dosierujon kaj ŝelon de uzanto en longa aranĝo\n" " -h forlasi projektan dosieron de uzanto en longa aranĝo\n" " -p forlasi la 'plan'-dosieron de uzanto en longa aranĝo\n" " -s produkti eligon en mallonga aranĝo (ĉi tio estas la defaŭlto)\n" #: src/pinky.c:498 msgid "" " -f omit the line of column headings in short format\n" " -w omit the user's full name in short format\n" " -i omit the user's full name and remote host in short format\n" " -q omit the user's full name, remote host and idle time\n" " in short format\n" msgstr "" " -f forlasi la linion de kolumnaj ĉapoj en mallonga aranĝo\n" " -w forlasi plenan uzantnomon en mallonga aranĝo\n" " -i kiel '-w' sed ankaŭ forlasi foran gastiganton\n" " -q kiel '-i' sed ankaŭ forlasi vakan tempon\n" #: src/pinky.c:507 #, c-format msgid "" "\n" "A lightweight 'finger' program; print user information.\n" "The utmp file will be %s.\n" msgstr "" "\n" "Malpeza 'finger'-programo; eligas informon pri uzantoj.\n" "La uzita 'utmp'-dosiero estos %s.\n" #: src/pinky.c:591 #, c-format msgid "no username specified; at least one must be specified when using -l" msgstr "neniu uzantnomo indikatas; endas indiki almenaŭ unu nomo kiam '-l' uzatas" #. This is a proper name. See the gettext manual, section Names. #: src/pr.c:332 msgid "Pete TerMaat" msgstr "Pit TERMAT (Pete TerMaat)" #. This is a proper name. See the gettext manual, section Names. #: src/pr.c:333 msgid "Roland Huebner" msgstr "Roland HIBNER (Roland Huebner)" #: src/pr.c:778 msgid "integer overflow" msgstr "troo de entjero" #: src/pr.c:917 msgid "'--pages=FIRST_PAGE[:LAST_PAGE]' missing argument" msgstr "mankas argumento en '--page=UNUA_PAĜO[:LASTA_PAĜO]'" #: src/pr.c:919 #, c-format msgid "invalid page range %s" msgstr "nevalida gamo de paĝoj: %s" #: src/pr.c:979 #, fuzzy msgid "'-l PAGE_LENGTH' invalid number of lines" msgstr "nevalida nombro da linioj je opcio '-l': %s" #: src/pr.c:994 #, fuzzy msgid "'-N NUMBER' invalid starting line number" msgstr "nevalida komenca lininumero je opcio '-N': %s" #: src/pr.c:998 #, fuzzy msgid "'-o MARGIN' invalid line offset" msgstr "nevalida marĝeno je opcio '-o': %s" #: src/pr.c:1035 #, fuzzy msgid "'-w PAGE_WIDTH' invalid number of characters" msgstr "nevalida nombro da signoj je opcio '-w': %s" #: src/pr.c:1044 #, fuzzy msgid "'-W PAGE_WIDTH' invalid number of characters" msgstr "nevalida nombro da signoj je opcio '-W': %s" #: src/pr.c:1073 msgid "cannot specify number of columns when printing in parallel" msgstr "ne eblas indiki nombro da kolumnoj kiam printiĝas horizontale" #: src/pr.c:1077 msgid "cannot specify both printing across and printing in parallel" msgstr "ne eblas printi ambaŭ vertikale kaj horizontale" #: src/pr.c:1180 #, c-format msgid "'-%c' extra characters or invalid number in the argument: %s" msgstr "troaj signoj aŭ nevalida nombro je opcio '-%c': %s" #: src/pr.c:1284 msgid "page width too narrow" msgstr "tro malgrandas paĝa larĝo" #: src/pr.c:2346 #, c-format msgid "starting page number % exceeds page count %" msgstr "komenca paĝnumero % pligrandas ol nombro da paĝoj %" #: src/pr.c:2373 msgid "page number overflow" msgstr "troo de paĝnumero" #: src/pr.c:2378 #, c-format msgid "Page %" msgstr "Paĝo %" #: src/pr.c:2750 msgid "Paginate or columnate FILE(s) for printing.\n" msgstr "" #: src/pr.c:2757 msgid "" " +FIRST_PAGE[:LAST_PAGE], --pages=FIRST_PAGE[:LAST_PAGE]\n" " begin [stop] printing with page FIRST_[LAST_]PAGE\n" " -COLUMN, --columns=COLUMN\n" " output COLUMN columns and print columns down,\n" " unless -a is used. Balance number of lines in the\n" " columns on each page\n" msgstr "" #: src/pr.c:2765 msgid "" " -a, --across print columns across rather than down, used together\n" " with -COLUMN\n" " -c, --show-control-chars\n" " use hat notation (^G) and octal backslash notation\n" " -d, --double-space\n" " double space the output\n" msgstr "" #: src/pr.c:2773 msgid "" " -D, --date-format=FORMAT\n" " use FORMAT for the header date\n" " -e[CHAR[WIDTH]], --expand-tabs[=CHAR[WIDTH]]\n" " expand input CHARs (TABs) to tab WIDTH (8)\n" " -F, -f, --form-feed\n" " use form feeds instead of newlines to separate pages\n" " (by a 3-line page header with -F or a 5-line header\n" " and trailer without -F)\n" msgstr "" #: src/pr.c:2783 msgid "" " -h, --header=HEADER\n" " use a centered HEADER instead of filename in page header,\n" " -h \"\" prints a blank line, don't use -h\"\"\n" " -i[CHAR[WIDTH]], --output-tabs[=CHAR[WIDTH]]\n" " replace spaces with CHARs (TABs) to tab WIDTH (8)\n" " -J, --join-lines merge full lines, turns off -W line truncation, no column\n" " alignment, --sep-string[=STRING] sets separators\n" msgstr "" #: src/pr.c:2792 msgid "" " -l, --length=PAGE_LENGTH\n" " set the page length to PAGE_LENGTH (66) lines\n" " (default number of lines of text 56, and with -F 63).\n" " implies -t if PAGE_LENGTH <= 10\n" msgstr "" #: src/pr.c:2798 msgid "" " -m, --merge print all files in parallel, one in each column,\n" " truncate lines, but join lines of full length with -J\n" msgstr "" #: src/pr.c:2802 msgid "" " -n[SEP[DIGITS]], --number-lines[=SEP[DIGITS]]\n" " number lines, use DIGITS (5) digits, then SEP (TAB),\n" " default counting starts with 1st line of input file\n" " -N, --first-line-number=NUMBER\n" " start counting with NUMBER at 1st line of first\n" " page printed (see +FIRST_PAGE)\n" msgstr "" #: src/pr.c:2810 msgid "" " -o, --indent=MARGIN\n" " offset each line with MARGIN (zero) spaces, do not\n" " affect -w or -W, MARGIN will be added to PAGE_WIDTH\n" " -r, --no-file-warnings\n" " omit warning when a file cannot be opened\n" msgstr "" #: src/pr.c:2817 msgid "" " -s[CHAR], --separator[=CHAR]\n" " separate columns by a single character, default for CHAR\n" " is the character without -w and 'no char' with -w.\n" " -s[CHAR] turns off line truncation of all 3 column\n" " options (-COLUMN|-a -COLUMN|-m) except -w is set\n" msgstr "" #: src/pr.c:2825 msgid "" " -S[STRING], --sep-string[=STRING]\n" " separate columns by STRING,\n" " without -S: Default separator with -J and \n" " otherwise (same as -S\" \"), no effect on column options\n" msgstr "" #: src/pr.c:2831 msgid "" " -t, --omit-header omit page headers and trailers;\n" " implied if PAGE_LENGTH <= 10\n" msgstr "" #: src/pr.c:2835 msgid "" " -T, --omit-pagination\n" " omit page headers and trailers, eliminate any pagination\n" " by form feeds set in input files\n" " -v, --show-nonprinting\n" " use octal backslash notation\n" " -w, --width=PAGE_WIDTH\n" " set page width to PAGE_WIDTH (72) characters for\n" " multiple text-column output only, -s[char] turns off (72)\n" msgstr "" #: src/pr.c:2845 msgid "" " -W, --page-width=PAGE_WIDTH\n" " set page width to PAGE_WIDTH (72) characters always,\n" " truncate lines, except -J option is set, no interference\n" " with -S or -s\n" msgstr "" #: src/printenv.c:62 #, c-format msgid "" "Usage: %s [OPTION]... [VARIABLE]...\n" "Print the values of the specified environment VARIABLE(s).\n" "If no VARIABLE is specified, print name and value pairs for them all.\n" "\n" msgstr "" "Uzmaniero: %s [OPCIO...] [VARIABLO...]\n" "\n" "Eligas la valorojn de la indikata(j) ĉirkaŭaĵa(j) variablo(j).\n" "Sen iu VARIABLO, paroj de nomo kaj valoro por ĉiuj ekzistantaj eligiĝas.\n" "\n" #: src/printenv.c:69 msgid " -0, --null end each output line with NUL, not newline\n" msgstr " -0, --null disigi eligon per nulbajtoj anstataŭ per novlinioj\n" #: src/printf.c:84 #, c-format msgid "warning: %s: character(s) following character constant have been ignored" msgstr "averto: %s: signo(j) post signokonstanto ignoriĝas" #: src/printf.c:93 #, c-format msgid "" "Usage: %s FORMAT [ARGUMENT]...\n" " or: %s OPTION\n" msgstr "" "Uzmaniero: %s ARANĜO [ARGUMENTO...]\n" " aŭ: %s OPCIO\n" #: src/printf.c:98 msgid "" "Print ARGUMENT(s) according to FORMAT, or execute according to OPTION:\n" "\n" msgstr "" " \n" "Eligas ARGUMENTO(j)n laŭ ARANĜO, aŭ montras informon laŭ OPCIO:\n" "\n" #: src/printf.c:104 msgid "" "\n" "FORMAT controls the output as in C printf. Interpreted sequences are:\n" "\n" " \\\" double quote\n" msgstr "" "\n" "ARANĜO stiras la eligon kiel je 'printf()' de C. Interpretitaj sekvencoj estas:\n" "\n" " \\\" duobla citigilo\n" #: src/printf.c:122 msgid "" " \\NNN byte with octal value NNN (1 to 3 digits)\n" " \\xHH byte with hexadecimal value HH (1 to 2 digits)\n" " \\uHHHH Unicode (ISO/IEC 10646) character with hex value HHHH (4 digits)\n" " \\UHHHHHHHH Unicode character with hex value HHHHHHHH (8 digits)\n" msgstr "" " \\NNN bajto kun okuma valoro NNN (1 ĝis 3 ciferoj)\n" " \\xHH bajto kun deksesuma valoro HH (1 aŭ 2 ciferoj)\n" " \\uHHHH Unikoda (ISO/IEC 10646) signo kun deksesuma valoro HHHH (4 ciferoj)\n" " \\UHHHHHHHH Unikoda signo kun deksesuma valoro HHHHHHHH (8 ciferoj)\n" #: src/printf.c:128 #, fuzzy msgid "" " %% a single %\n" " %b ARGUMENT as a string with '\\' escapes interpreted,\n" " except that octal escapes are of the form \\0 or \\0NNN\n" " %q ARGUMENT is printed in a format that can be reused as shell input,\n" " escaping non-printable characters with the proposed POSIX $'' syntax.\n" "\n" "and all C format specifications ending with one of diouxXfeEgGcs, with\n" "ARGUMENTs converted to proper type first. Variable widths are handled.\n" msgstr "" " %% ununura '%'\n" " %b ARGUMENTO kiel signoĉeno kun '\\'-eskapoj interpretitaj,\n" " escepte ke okumaj eskapoj havas la formon '\\0' aŭ '\\0NNN'\n" "\n" "Ankaŭ interpretiĝas ĉiuj C-aranĝindikoj kiuj finas kun unu el «diouxXfeEgGcs»\n" "kun ARGUMENTOj konvertitaj al ĝusta tipo unue. Variablaj larĝoj traktiĝas.\n" #: src/printf.c:155 #, c-format msgid "%s: expected a numeric value" msgstr "%s: numera valoro atendatas" #: src/printf.c:157 #, c-format msgid "%s: value not completely converted" msgstr "%s: valoro ne komplete konvertiĝis" #: src/printf.c:254 src/printf.c:281 msgid "missing hexadecimal number in escape" msgstr "mankas deksesuma nombro" #: src/printf.c:293 #, c-format msgid "invalid universal character name \\%c%0*x" msgstr "nevalida universala signonomo \\%c%0*x" #: src/printf.c:566 #, c-format msgid "invalid field width: %s" msgstr "nevalida kampgrando: %s" #: src/printf.c:601 #, c-format msgid "invalid precision: %s" msgstr "nevalida precizo: %s" #: src/printf.c:628 #, c-format msgid "%.*s: invalid conversion specification" msgstr "nevalida konvertindiko: %.*s" #: src/printf.c:711 #, c-format msgid "warning: ignoring excess arguments, starting with %s" msgstr "averto: troaj argumentoj ignoratas, komence de %s" #. TRANSLATORS: Please translate "F. Pinard" to "François Pinard" #. if "ç" (c-with-cedilla) is available in the translation's character #. set and encoding. #. This is a proper name. See the gettext manual, section Names. #: src/ptx.c:41 msgid "F. Pinard" msgstr "Fransŭa PINAR (François Pinard)" #: src/ptx.c:423 #, c-format msgid "%s (for regexp %s)" msgstr "%s (por regulesprimo %s)" #: src/ptx.c:825 #, fuzzy, c-format #| msgid "error in regular expression matcher" msgid "error: regular expression has a match of length zero: %s" msgstr "eraro en regulesprima serĉo" #: src/ptx.c:1713 #, c-format msgid "" "Usage: %s [OPTION]... [INPUT]... (without -G)\n" " or: %s -G [OPTION]... [INPUT [OUTPUT]]\n" msgstr "" "Uzmaniero: %s [OPCIO...] [ENIGO...] (sen '-G')\n" " aŭ: %s -G [OPCIO...] [ENIGO [ELIGO]]\n" #: src/ptx.c:1717 msgid "Output a permuted index, including context, of the words in the input files.\n" msgstr "" "Eligas ordigitan liston de la vortoj en la enigdosieroj,\n" "inkluzivante la kuntekston de tiuj vortoj.\n" #: src/ptx.c:1724 #, fuzzy msgid "" " -A, --auto-reference output automatically generated references\n" " -G, --traditional behave more like System V 'ptx'\n" msgstr "" " -A, --auto-reference aldoni linireferencojn\n" " -G, --traditional konduti pli kiel Sistema V 'ptx'\n" " -F, --flag-truncation=ĈENO uzi ĈENOn por montri linidistranĉojn\n" #: src/ptx.c:1728 msgid "" " -F, --flag-truncation=STRING use STRING for flagging line truncations.\n" " The default is '/'\n" msgstr "" #: src/ptx.c:1732 msgid "" " -M, --macro-name=STRING macro name to use instead of 'xx'\n" " -O, --format=roff generate output as roff directives\n" " -R, --right-side-refs put references at right, not counted in -w\n" " -S, --sentence-regexp=REGEXP for end of lines or end of sentences\n" " -T, --format=tex generate output as TeX directives\n" msgstr "" " -M, --macro-name=NOMO uzenda makronomo anstataŭ «xx»\n" " -O, --format=roff generi eligon en formo de 'roff'-direktivoj\n" " -R, --right-side-refs meti linireferencojn dekstre, ekster larĝo\n" " -S, --sentence-regexp=REGESP por linifinoj aŭ fino de frazoj\n" " -T, --format=tex generi eligon en formo de 'TeX'-direktivoj\n" #: src/ptx.c:1739 msgid "" " -W, --word-regexp=REGEXP use REGEXP to match each keyword\n" " -b, --break-file=FILE word break characters in this FILE\n" " -f, --ignore-case fold lower case to upper case for sorting\n" " -g, --gap-size=NUMBER gap size in columns between output fields\n" " -i, --ignore-file=FILE read ignore word list from FILE\n" " -o, --only-file=FILE read only word list from this FILE\n" msgstr "" " -W, --word-regexp=REGESP uzi REGESP por kongrui ĉiun ŝlosilvorton\n" " -b, --break-file=DOSIERO vortrompigaj signoj estas en ĉi tiu DOSIERO\n" " -f, --ignore-case trakti minusklojn kiel majusklojn por ordigo\n" " -g, --gap-size=NOMBRO breĉa grando en kolumnoj inter eligaj kampoj\n" " -i, --ignore-file=DOSIERO legi liston de ignorendaj vortoj el DOSIERO\n" " -o, --only-file=DOSIERO legi nuran vortliston el ĉi tiu DOSIERO\n" #: src/ptx.c:1747 msgid "" " -r, --references first field of each line is a reference\n" " -t, --typeset-mode - not implemented -\n" " -w, --width=NUMBER output width in columns, reference excluded\n" msgstr "" " -r, --references unua kampo de ĉiu linio estas referenco\n" " -t, --typeset-mode (ignoriĝas, ne funkcias)\n" " -w, --width=NOMBRO eliglarĝo en kolumnoj (ekskluzive referenco)\n" #: src/ptx.c:1844 #, c-format msgid "invalid gap width: %s" msgstr "nevalida larĝo de fendo: %s" #: src/ptx.c:1871 #, c-format msgid "invalid line width: %s" msgstr "nevalida linia larĝo: %s" #: src/pwd.c:58 msgid "" "Print the full filename of the current working directory.\n" "\n" msgstr "" "Eligas la kompletan dosiernomon de la aktuala labordosierujo.\n" "\n" #: src/pwd.c:62 msgid "" " -L, --logical use PWD from environment, even if it contains symlinks\n" " -P, --physical avoid all symlinks\n" msgstr "" " -L, --logical uzi PWD de la ĉirkaŭaĵo, eĉ se ĝi enhavas simbolajn ligojn\n" " -P, --physical eviti ĉiujn simbolajn ligojn\n" #: src/pwd.c:68 msgid "" "\n" "If no option is specified, -P is assumed.\n" msgstr "" "\n" "Sen iu opcio, '-P' supozatas.\n" #: src/pwd.c:169 #, c-format msgid "failed to chdir to %s" msgstr "malsukcesis ŝanĝi aktualan dosierujon al %s" #: src/pwd.c:173 src/pwd.c:280 src/split.c:469 #, c-format msgid "failed to stat %s" msgstr "malsukcesis eltrovi statinformon pri %s" #: src/pwd.c:238 #, c-format msgid "couldn't find directory entry in %s with matching i-node" msgstr "malsukcesis trovi en %s dosierujan elementon kies indeksnodo kongruas" #: src/pwd.c:367 #, c-format msgid "ignoring non-option arguments" msgstr "ignoratas ne-opciaj argumentoj" #. This is a proper name. See the gettext manual, section Names. #: src/readlink.c:32 msgid "Dmitry V. Levin" msgstr "Dmitri LEVIN (Dmitry V. Levin)" #: src/readlink.c:62 src/realpath.c:71 src/shred.c:170 src/stat.c:1733 #: src/touch.c:217 #, c-format msgid "Usage: %s [OPTION]... FILE...\n" msgstr "Uzmaniero: %s [OPCIO...] DOSIERO...\n" #: src/readlink.c:63 msgid "" "Print value of a symbolic link or canonical file name\n" "\n" msgstr "" "Montras la valoron de simbola ligo aŭ ĝian norman dosiernomon.\n" "\n" #: src/readlink.c:65 msgid "" " -f, --canonicalize canonicalize by following every symlink in\n" " every component of the given name recursively;\n" " all but the last component must exist\n" " -e, --canonicalize-existing canonicalize by following every symlink in\n" " every component of the given name recursively,\n" " all components must exist\n" msgstr "" #: src/readlink.c:75 msgid "" " -m, --canonicalize-missing canonicalize by following every symlink in\n" " every component of the given name recursively,\n" " without requirements on components existence\n" " -n, --no-newline do not output the trailing delimiter\n" " -q, --quiet\n" " -s, --silent suppress most error messages (on by default)\n" " -v, --verbose report error messages\n" " -z, --zero end each output line with NUL, not newline\n" msgstr "" #: src/readlink.c:152 #, c-format msgid "ignoring --no-newline with multiple arguments" msgstr "ignoratas «--no-newline» kun pluraj argumentoj" #: src/realpath.c:72 msgid "" "Print the resolved absolute file name;\n" "all but the last component must exist\n" "\n" msgstr "" #: src/realpath.c:77 msgid "" " -e, --canonicalize-existing all components of the path must exist\n" " -m, --canonicalize-missing no path components need exist or be a directory\n" " -L, --logical resolve '..' components before symlinks\n" " -P, --physical resolve symlinks as encountered (default)\n" " -q, --quiet suppress most error messages\n" " --relative-to=DIR print the resolved path relative to DIR\n" " --relative-base=DIR print absolute paths unless paths below DIR\n" " -s, --strip, --no-symlinks don't expand symlinks\n" " -z, --zero end each output line with NUL, not newline\n" msgstr "" #: src/relpath.c:130 msgid "generating relative path" msgstr "relativa pado generiĝas" #: src/remove.c:273 #, c-format msgid "%s: descend into write-protected directory %s? " msgstr "%s: ĉu eniri en kontraŭskribe protektatan dosierujon %s? " #: src/remove.c:274 #, c-format msgid "%s: descend into directory %s? " msgstr "%s: ĉu eniri en dosierujon %s? " #. TRANSLATORS: In the next two strings the second %s is #. replaced by the type of the file. To avoid grammatical #. problems, it may be more convenient to translate these #. strings instead as: "%1$s: %3$s is write-protected and #. is of type '%2$s' -- remove it? ". #: src/remove.c:291 #, c-format msgid "%s: remove write-protected %s %s? " msgstr "%1$s: ĉu forigi %3$s? (ĝi estas kontraŭskribe protektata %2$s) " #: src/remove.c:292 #, c-format msgid "%s: remove %s %s? " msgstr "%1$s: ĉu forigi %3$s? (ĝi estas %2$s) " #: src/remove.c:375 #, fuzzy, c-format msgid "removed directory %s\n" msgstr "forigiĝis dosierujo %s\n" # Temas pri «.» kaj «..» (mema kaj patra ujo). #: src/remove.c:447 #, c-format msgid "refusing to remove %s or %s directory: skipping %s" msgstr "ne forigiĝas dosierujojn %s kaj %s; transsaltatas %s" #: src/remove.c:476 #, fuzzy, c-format #| msgid "failed to stat %s" msgid "failed to stat %s: skipping %s" msgstr "malsukcesis eltrovi statinformon pri %s" #: src/remove.c:489 src/remove.c:540 #, c-format msgid "skipping %s, since it's on a different device" msgstr "transsaltatas %s, ĉar ĝi estas en alia aparato" #: src/remove.c:491 #, c-format msgid "and --preserve-root=all is in effect" msgstr "" #: src/remove.c:560 #, c-format msgid "traversal failed: %s" msgstr "malsukcesis transiro: %s" #: src/remove.c:566 #, c-format msgid "" "unexpected failure: fts_info=%d: %s\n" "please report to %s" msgstr "" "neatendita malsukceso: fts_info()=%d: %s\n" "bonvolu raporti ĉi tion al %s" #: src/rm.c:117 #, c-format msgid "Try '%s ./%s' to remove the file %s.\n" msgstr "Tajpu '%s ./%s' por forigi dosieron %s.\n" #: src/rm.c:134 msgid "" "Remove (unlink) the FILE(s).\n" "\n" " -f, --force ignore nonexistent files and arguments, never prompt\n" " -i prompt before every removal\n" msgstr "" #: src/rm.c:140 msgid "" " -I prompt once before removing more than three files, or\n" " when removing recursively; less intrusive than -i,\n" " while still giving protection against most mistakes\n" " --interactive[=WHEN] prompt according to WHEN: never, once (-I), or\n" " always (-i); without WHEN, prompt always\n" msgstr "" #: src/rm.c:147 msgid "" " --one-file-system when removing a hierarchy recursively, skip any\n" " directory that is on a file system different from\n" " that of the corresponding command line argument\n" msgstr "" #: src/rm.c:152 msgid "" " --no-preserve-root do not treat '/' specially\n" " --preserve-root[=all] do not remove '/' (default);\n" " with 'all', reject any command line argument\n" " on a separate device from its parent\n" msgstr "" #: src/rm.c:158 msgid "" " -r, -R, --recursive remove directories and their contents recursively\n" " -d, --dir remove empty directories\n" " -v, --verbose explain what is being done\n" msgstr "" #: src/rm.c:165 msgid "" "\n" "By default, rm does not remove directories. Use the --recursive (-r or -R)\n" "option to remove each listed directory, too, along with all of its contents.\n" msgstr "" "\n" "Defaŭlte, 'rm' ne forigas dosierujojn. Uzu opcion '--recursive' (-r aŭ -R)\n" "por ankaŭ forigi ĉiun indikatan dosierujon kaj ĝian tutan enhavon.\n" #: src/rm.c:170 #, c-format msgid "" "\n" "To remove a file whose name starts with a '-', for example '-foo',\n" "use one of these commands:\n" " %s -- -foo\n" "\n" " %s ./-foo\n" msgstr "" #: src/rm.c:179 msgid "" "\n" "Note that if you use rm to remove a file, it might be possible to recover\n" "some of its contents, given sufficient expertise and/or time. For greater\n" "assurance that the contents are truly unrecoverable, consider using shred(1).\n" msgstr "" #: src/rm.c:297 msgid "you may not abbreviate the --no-preserve-root option" msgstr "" #: src/rm.c:309 #, fuzzy, c-format #| msgid "unrecognized operand %s" msgid "unrecognized --preserve-root argument: %s" msgstr "ne rekonatas argumento %s" #: src/rm.c:359 #, fuzzy, c-format msgid "%s: remove % argument recursively? " msgid_plural "%s: remove % arguments recursively? " msgstr[0] "%s: ĉu forigi %zu argumenton rikure? " msgstr[1] "%s: ĉu forigi %zu argumentojn rikure? " #: src/rm.c:362 #, fuzzy, c-format msgid "%s: remove % argument? " msgid_plural "%s: remove % arguments? " msgstr[0] "%s: ĉu forigi %zu argumenton? " msgstr[1] "%s: ĉu forigi %zu argumentojn? " #: src/rmdir.c:133 src/rmdir.c:243 #, c-format msgid "removing directory, %s" msgstr "forigiĝas dosierujo %s" #: src/rmdir.c:152 #, c-format msgid "failed to remove directory %s" msgstr "malsukcesis forigi dosierujon %s" #: src/rmdir.c:157 src/rmdir.c:286 #, c-format msgid "failed to remove %s" msgstr "malsukcesis forigi %s" #: src/rmdir.c:175 msgid "" "Remove the DIRECTORY(ies), if they are empty.\n" "\n" " --ignore-fail-on-non-empty\n" " ignore each failure that is solely because a directory\n" " is non-empty\n" msgstr "" "Forigas ĉiun DOSIERUJOn, se ĝi vakas.\n" "\n" " --ignore-fail-on-non-empty\n" " ignori ĉiun malsukceson kiu kaŭziĝas nur per nevaka dosierujo\n" #: src/rmdir.c:182 msgid "" " -p, --parents remove DIRECTORY and its ancestors; e.g., 'rmdir -p a/b/c' is\n" " similar to 'rmdir a/b/c a/b a'\n" " -v, --verbose output a diagnostic for every directory processed\n" msgstr "" " -p, --parents forigi la DOSIERUJOn kaj ĝiajn patrajn; ekzemple\n" " «rmdir -p a/b/c» similas al «rmdir a/b/c a/b a»\n" " -v, --verbose eligi mesaĝon por ĉiu dosierujo kiu proceziĝis\n" #: src/rmdir.c:275 #, fuzzy, c-format #| msgid "failed to create symbolic link %s" msgid "failed to remove %s: Symbolic link not followed" msgstr "malsukcesis krei simbolan ligon %s" #: src/runcon.c:78 #, c-format msgid "" "Usage: %s CONTEXT COMMAND [args]\n" " or: %s [ -c ] [-u USER] [-r ROLE] [-t TYPE] [-l RANGE] COMMAND [args]\n" msgstr "" #: src/runcon.c:82 msgid "" "Run a program in a different SELinux security context.\n" "With neither CONTEXT nor COMMAND, print the current security context.\n" msgstr "" #: src/runcon.c:89 msgid "" " CONTEXT Complete security context\n" " -c, --compute compute process transition context before modifying\n" " -t, --type=TYPE type (for same role as parent)\n" " -u, --user=USER user identity\n" " -r, --role=ROLE role\n" " -l, --range=RANGE levelrange\n" msgstr "" #: src/runcon.c:138 msgid "multiple roles" msgstr "pluraj roloj" #: src/runcon.c:143 msgid "multiple types" msgstr "pluraj tipoj" #: src/runcon.c:148 msgid "multiple users" msgstr "pluraj uzantoj" #: src/runcon.c:153 msgid "multiple levelranges" msgstr "pluraj gamoj de niveloj" #: src/runcon.c:171 src/runcon.c:207 msgid "failed to get current context" msgstr "malsukcesis eltrovi aktualan kuntekston" #: src/runcon.c:181 #, c-format msgid "you must specify -c, -t, -u, -l, -r, or context" msgstr "nepras indiki '-c', '-l', '-r', '-t', '-u' aŭ kuntekston" #: src/runcon.c:189 #, c-format msgid "no command specified" msgstr "neniu komando indikatas" #: src/runcon.c:194 #, c-format msgid "%s may be used only on a SELinux kernel" msgstr "eblas uzi %s nur je SE-Linuksa kerno" #: src/runcon.c:221 msgid "failed to compute a new context" msgstr "malsukcesis kalkuli novan kuntekston" #: src/runcon.c:235 #, fuzzy, c-format msgid "failed to set new user: %s" msgstr "malsukcesis agordi novan uzanton %s" #: src/runcon.c:238 #, fuzzy, c-format msgid "failed to set new type: %s" msgstr "malsukcesis agordi novan tipon %s" #: src/runcon.c:241 #, fuzzy, c-format msgid "failed to set new range: %s" msgstr "malsukcesis agordi novan gamon %s" #: src/runcon.c:244 #, fuzzy, c-format msgid "failed to set new role: %s" msgstr "malsukcesis agordi novan rolon %s" #: src/runcon.c:253 #, c-format msgid "unable to set security context %s" msgstr "malsukcesis agordi sekurecan kuntekston %s" #: src/seq.c:80 #, c-format msgid "" "Usage: %s [OPTION]... LAST\n" " or: %s [OPTION]... FIRST LAST\n" " or: %s [OPTION]... FIRST INCREMENT LAST\n" msgstr "" "Uzmaniero: %s [OPCIO...] LASTA\n" " aŭ: %s [OPCIO...] UNUA LASTA\n" " aŭ: %s [OPCIO...] UNUA PAŜO LASTA\n" #: src/seq.c:85 msgid "Print numbers from FIRST to LAST, in steps of INCREMENT.\n" msgstr "" #: src/seq.c:91 msgid "" " -f, --format=FORMAT use printf style floating-point FORMAT\n" " -s, --separator=STRING use STRING to separate numbers (default: \\n)\n" " -w, --equal-width equalize width by padding with leading zeroes\n" msgstr "" #: src/seq.c:98 msgid "" "\n" "If FIRST or INCREMENT is omitted, it defaults to 1. That is, an\n" "omitted INCREMENT defaults to 1 even when LAST is smaller than FIRST.\n" "The sequence of numbers ends when the sum of the current number and\n" "INCREMENT would become greater than LAST.\n" "FIRST, INCREMENT, and LAST are interpreted as floating point values.\n" "INCREMENT is usually positive if FIRST is smaller than LAST, and\n" "INCREMENT is usually negative if FIRST is greater than LAST.\n" "INCREMENT must not be 0; none of FIRST, INCREMENT and LAST may be NaN.\n" msgstr "" #: src/seq.c:109 msgid "" "FORMAT must be suitable for printing one argument of type 'double';\n" "it defaults to %.PRECf if FIRST, INCREMENT, and LAST are all fixed point\n" "decimal numbers with maximum precision PREC, and to %g otherwise.\n" msgstr "" #: src/seq.c:155 #, c-format msgid "invalid floating point argument: %s" msgstr "nevalida glitkoma argumento: %s" #: src/seq.c:161 #, fuzzy, c-format msgid "invalid %s argument: %s" msgstr "nevalida argumento por opcio '--%s': %s" #: src/seq.c:268 #, c-format msgid "format %s has unknown %%%c directive" msgstr "aranĝo %s enhavas nekonatan %%%c-indikon" #: src/seq.c:648 #, c-format msgid "format string may not be specified when printing equal width strings" msgstr "ne permesatas indiki aranĝon kiam eligiĝas egallarĝajn ĉenojn" #: src/seq.c:693 #, fuzzy, c-format msgid "invalid Zero increment value: %s" msgstr "nevalida lininumera alkremento: %s" #: src/set-fields.c:166 #, fuzzy msgid "invalid byte or character range" msgstr "nevalida listo de bajtoj, signoj, aŭ kampoj" #: src/set-fields.c:167 #, fuzzy msgid "invalid field range" msgstr "nevalida kampvaloro %s" #: src/set-fields.c:174 src/set-fields.c:220 #, fuzzy msgid "byte/character positions are numbered from 1" msgstr "kampoj kaj pozicioj komencas ekde 1" #: src/set-fields.c:175 src/set-fields.c:221 #, fuzzy msgid "fields are numbered from 1" msgstr "kampoj kaj pozicioj komencas ekde 1" # La originalo malklaras, la traduko ĝustas. #: src/set-fields.c:195 msgid "invalid range with no endpoint: -" msgstr "nevalida gamo, sen finpunktoj: «-»" #: src/set-fields.c:209 msgid "invalid decreasing range" msgstr "nevalida gamo, ĝi malkreskas" #: src/set-fields.c:258 #, fuzzy, c-format msgid "byte/character offset %s is too large" msgstr "bajtpozicio %s estas tro granda" #: src/set-fields.c:259 #, c-format msgid "field number %s is too large" msgstr "kampnumero %s estas tro granda" #: src/set-fields.c:270 #, fuzzy, c-format msgid "invalid byte/character position %s" msgstr "nevalida signoklaso %s" #: src/set-fields.c:271 #, c-format msgid "invalid field value %s" msgstr "nevalida kampvaloro %s" #: src/set-fields.c:279 #, fuzzy msgid "missing list of byte/character positions" msgstr "mankas listo de pozicioj" #: src/set-fields.c:280 msgid "missing list of fields" msgstr "mankas listo de kampoj" #. This is a proper name. See the gettext manual, section Names. #: src/shred.c:74 msgid "Colin Plumb" msgstr "Kolin PLOM (Colin Plumb)" #: src/shred.c:171 msgid "" "Overwrite the specified FILE(s) repeatedly, in order to make it harder\n" "for even very expensive hardware probing to recover the data.\n" msgstr "" #: src/shred.c:175 #, fuzzy msgid "" "\n" "If FILE is -, shred standard output.\n" msgstr "" "\n" "Kiam DOSIERO estas «-», kopii denove al ĉefeligujo.\n" #: src/shred.c:182 #, c-format msgid "" " -f, --force change permissions to allow writing if necessary\n" " -n, --iterations=N overwrite N times instead of the default (%d)\n" " --random-source=FILE get random bytes from FILE\n" " -s, --size=N shred this many bytes (suffixes like K, M, G accepted)\n" msgstr "" #: src/shred.c:188 msgid "" " -u deallocate and remove file after overwriting\n" " --remove[=HOW] like -u but give control on HOW to delete; See below\n" " -v, --verbose show progress\n" " -x, --exact do not round file sizes up to the next full block;\n" " this is the default for non-regular files\n" " -z, --zero add a final overwrite with zeros to hide shredding\n" msgstr "" #: src/shred.c:198 msgid "" "\n" "Delete FILE(s) if --remove (-u) is specified. The default is not to remove\n" "the files because it is common to operate on device files like /dev/hda,\n" "and those files usually should not be removed.\n" "The optional HOW parameter indicates how to remove a directory entry:\n" "'unlink' => use a standard unlink call.\n" "'wipe' => also first obfuscate bytes in the name.\n" "'wipesync' => also sync each obfuscated byte to the device.\n" "The default mode is 'wipesync', but note it can be expensive.\n" "\n" msgstr "" #: src/shred.c:210 msgid "" "CAUTION: shred assumes the file system and hardware overwrite data in place.\n" "Although this is common, many platforms operate otherwise. Also, backups\n" "and mirrors may contain unremovable copies that will let a shredded file\n" "be recovered later. See the GNU coreutils manual for details.\n" msgstr "" #: src/shred.c:310 #, c-format msgid "%s: fdatasync failed" msgstr "malsukcesis 'fdatasync' por %s" #: src/shred.c:321 #, c-format msgid "%s: fsync failed" msgstr "malsukcesis 'fsync' por %s" #: src/shred.c:438 #, c-format msgid "%s: cannot rewind" msgstr "malsukcesis 'lseek' ĝis komenco sur %s" #: src/shred.c:458 #, c-format msgid "%s: pass %lu/%lu (%s)..." msgstr "%s: paŝo %lu/%lu (%s)..." #: src/shred.c:509 #, c-format msgid "%s: error writing at offset %s" msgstr "%s: skrib-eraro je pozicio %s" #: src/shred.c:530 #, c-format msgid "%s: lseek failed" msgstr "malsukcesis 'lseek' sur %s" #: src/shred.c:542 #, c-format msgid "%s: file too large" msgstr "%s: dosiero tro grandas" #: src/shred.c:566 #, c-format msgid "%s: pass %lu/%lu (%s)...%s" msgstr "%s: paŝo %lu/%lu (%s)...%s" #: src/shred.c:582 #, c-format msgid "%s: pass %lu/%lu (%s)...%s/%s %d%%" msgstr "%s: paŝo %lu/%lu (%s)...%s/%s %d%%" #: src/shred.c:840 #, c-format msgid "%s: fstat failed" msgstr "malsukcesis eltrovi statinformon pri malferma %s" #: src/shred.c:851 #, c-format msgid "%s: invalid file type" msgstr "%s: nevalida dosiertipo" #: src/shred.c:856 #, c-format msgid "%s: file has negative size" msgstr "%s: dosiero havas negativan grandon" #: src/shred.c:952 src/sort.c:972 src/split.c:475 #, c-format msgid "%s: error truncating" msgstr "%s: eraro dum trunkado" #: src/shred.c:971 #, c-format msgid "%s: fcntl failed" msgstr "malsukcesis fcntl() sur %s" #: src/shred.c:976 #, c-format msgid "%s: cannot shred append-only file descriptor" msgstr "maleblas tutviŝi nur-aldonan dosieron %s" #: src/shred.c:1059 #, c-format msgid "%s: removing" msgstr "forigiĝas %s" #: src/shred.c:1084 #, c-format msgid "%s: renamed to %s" msgstr "%s renomiĝis al %s" #: src/shred.c:1093 #, c-format msgid "%s: failed to remove" msgstr "malsukcesis forigi %s" #: src/shred.c:1097 #, c-format msgid "%s: removed" msgstr "forigiĝis %s" #: src/shred.c:1104 src/shred.c:1147 #, c-format msgid "%s: failed to close" msgstr "malsukcesis fermi %s" #: src/shred.c:1140 #, c-format msgid "%s: failed to open for writing" msgstr "malsukcesis malfermi %s por skribado" #: src/shred.c:1203 #, fuzzy msgid "invalid number of passes" msgstr "nevalida nombro de paŝoj: %s" #: src/shred.c:1208 src/shuf.c:462 src/sort.c:4507 msgid "multiple random sources specified" msgstr "pluraj aleatoraj fontoj indikatas" #: src/shred.c:1222 #, fuzzy msgid "invalid file size" msgstr "%s: nevalida dosiergrando" #: src/shuf.c:62 #, c-format msgid "" "Usage: %s [OPTION]... [FILE]\n" " or: %s -e [OPTION]... [ARG]...\n" " or: %s -i LO-HI [OPTION]...\n" msgstr "" "Uzmaniero: %s [OPCIO...] [DOSIERO]\n" " aŭ: %s -e [OPCIO...] [ARGUMENTO...]\n" " aŭ: %s -i DE-ĜIS [OPCIO...]\n" #: src/shuf.c:68 msgid "Write a random permutation of the input lines to standard output.\n" msgstr "" "Skribas hazardan permuton de la enigaj linioj al ĉefeligujo.\n" "\n" #: src/shuf.c:75 msgid "" " -e, --echo treat each ARG as an input line\n" " -i, --input-range=LO-HI treat each number LO through HI as an input line\n" " -n, --head-count=COUNT output at most COUNT lines\n" " -o, --output=FILE write result to FILE instead of standard output\n" " --random-source=FILE get random bytes from FILE\n" " -r, --repeat output lines can be repeated\n" msgstr "" " -e, --echo trakti ĉiun ARGUMENTOn kiel enigan linion\n" " -i, --input-range=DE-ĜIS trakti ĉiun numeron ekde DE tra ĜIS kiel enigan linion\n" " -n, --head-count=NOMBRO eligi maksimume NOMBRO liniojn\n" " -o, --output=DOSIERO eligi rezulton al DOSIERO anstataŭ al ĉefeligujo\n" " --random-source=DOSIERO preni hazardajn bajtojn el DOSIERO\n" " -r, --repeat permesi ke la eniglinioj uziĝas plurfoje\n" #: src/shuf.c:83 src/sort.c:500 src/uniq.c:201 msgid " -z, --zero-terminated line delimiter is NUL, not newline\n" msgstr " -z, --zero-terminated disigi eligon per nulbajtoj anstataŭ per novlinioj\n" #: src/shuf.c:226 msgid "too many input lines" msgstr "tro multaj eniglinioj" #: src/shuf.c:418 msgid "multiple -i options specified" msgstr "pluraj opcioj '-i' indikatas" #: src/shuf.c:425 src/shuf.c:431 src/shuf.c:436 #, fuzzy msgid "invalid input range" msgstr "nevalida gamo: %s" #: src/shuf.c:449 #, fuzzy, c-format msgid "invalid line count: %s" msgstr "nevalida nombro de linioj: %s" #: src/shuf.c:456 src/sort.c:4501 msgid "multiple output files specified" msgstr "pluraj eligaj dosieroj indikatas" #: src/shuf.c:486 #, c-format msgid "cannot combine -e and -i options" msgstr "nekombineblas opcioj '-e' kaj '-i'" #: src/shuf.c:576 msgid "no lines to repeat" msgstr "neniu linio por ripeti" #: src/sleep.c:44 #, c-format msgid "" "Usage: %s NUMBER[SUFFIX]...\n" " or: %s OPTION\n" "Pause for NUMBER seconds. SUFFIX may be 's' for seconds (the default),\n" "'m' for minutes, 'h' for hours or 'd' for days. NUMBER need not be an\n" "integer. Given two or more arguments, pause for the amount of time\n" "specified by the sum of their values.\n" "\n" msgstr "" #: src/sleep.c:132 src/timeout.c:365 #, c-format msgid "invalid time interval %s" msgstr "nevalida tempintervalo: %s" #: src/sleep.c:143 src/tail.c:1291 msgid "cannot read realtime clock" msgstr "malsukcesis legi realtempan horloĝon" #: src/sort.c:420 msgid "Write sorted concatenation of all FILE(s) to standard output.\n" msgstr "" "Eligas ordigitan kunmeton de ĉiuj DOSIEROj al ĉefeligujo.\n" "\n" #: src/sort.c:427 msgid "" "Ordering options:\n" "\n" msgstr "" "Ordigantaj opcioj:\n" "\n" #: src/sort.c:431 msgid "" " -b, --ignore-leading-blanks ignore leading blanks\n" " -d, --dictionary-order consider only blanks and alphanumeric characters\n" " -f, --ignore-case fold lower case to upper case characters\n" msgstr "" #: src/sort.c:437 msgid "" " -g, --general-numeric-sort compare according to general numerical value\n" " -i, --ignore-nonprinting consider only printable characters\n" " -M, --month-sort compare (unknown) < 'JAN' < ... < 'DEC'\n" msgstr "" #: src/sort.c:442 msgid " -h, --human-numeric-sort compare human readable numbers (e.g., 2K 1G)\n" msgstr "" #: src/sort.c:445 msgid "" " -n, --numeric-sort compare according to string numerical value\n" " -R, --random-sort shuffle, but group identical keys. See shuf(1)\n" " --random-source=FILE get random bytes from FILE\n" " -r, --reverse reverse the result of comparisons\n" msgstr "" #: src/sort.c:451 msgid "" " --sort=WORD sort according to WORD:\n" " general-numeric -g, human-numeric -h, month -M,\n" " numeric -n, random -R, version -V\n" " -V, --version-sort natural sort of (version) numbers within text\n" "\n" msgstr "" #: src/sort.c:459 msgid "" "Other options:\n" "\n" msgstr "" "Aliaj opcioj:\n" "\n" #: src/sort.c:463 msgid "" " --batch-size=NMERGE merge at most NMERGE inputs at once;\n" " for more use temp files\n" msgstr "" #: src/sort.c:467 msgid "" " -c, --check, --check=diagnose-first check for sorted input; do not sort\n" " -C, --check=quiet, --check=silent like -c, but do not report first bad line\n" " --compress-program=PROG compress temporaries with PROG;\n" " decompress them with PROG -d\n" msgstr "" #: src/sort.c:474 msgid "" " --debug annotate the part of the line used to sort,\n" " and warn about questionable usage to stderr\n" " --files0-from=F read input from the files specified by\n" " NUL-terminated names in file F;\n" " If F is - then read names from standard input\n" msgstr "" #: src/sort.c:481 msgid "" " -k, --key=KEYDEF sort via a key; KEYDEF gives location and type\n" " -m, --merge merge already sorted files; do not sort\n" msgstr "" #: src/sort.c:485 msgid "" " -o, --output=FILE write result to FILE instead of standard output\n" " -s, --stable stabilize sort by disabling last-resort comparison\n" " -S, --buffer-size=SIZE use SIZE for main memory buffer\n" msgstr "" #: src/sort.c:491 #, c-format msgid "" " -t, --field-separator=SEP use SEP instead of non-blank to blank transition\n" " -T, --temporary-directory=DIR use DIR for temporaries, not $TMPDIR or %s;\n" " multiple options specify multiple directories\n" " --parallel=N change the number of sorts run concurrently to N\n" " -u, --unique with -c, check for strict ordering;\n" " without -c, output only the first of an equal run\n" msgstr "" #: src/sort.c:505 msgid "" "\n" "KEYDEF is F[.C][OPTS][,F[.C][OPTS]] for start and stop position, where F is a\n" "field number and C a character position in the field; both are origin 1, and\n" "the stop position defaults to the line's end. If neither -t nor -b is in\n" "effect, characters in a field are counted from the beginning of the preceding\n" "whitespace. OPTS is one or more single-letter ordering options [bdfgiMhnRrV],\n" "which override global ordering options for that key. If no key is given, use\n" "the entire line as the key. Use --debug to diagnose incorrect key usage.\n" "\n" "SIZE may be followed by the following multiplicative suffixes:\n" msgstr "" #: src/sort.c:518 msgid "" "% 1% of memory, b 1, K 1024 (default), and so on for M, G, T, P, E, Z, Y.\n" "\n" "*** WARNING ***\n" "The locale specified by the environment affects sort order.\n" "Set LC_ALL=C to get the traditional sort order that uses\n" "native byte values.\n" msgstr "" #: src/sort.c:716 #, c-format msgid "waiting for %s [-d]" msgstr "atendado pri '%s [-d]'" #: src/sort.c:721 #, c-format msgid "%s [-d] terminated abnormally" msgstr "'%s [-d]' finiĝis nenormale" #: src/sort.c:876 #, c-format msgid "cannot create temporary file in %s" msgstr "malsukcesis krei provizoran dosieron en %s" #: src/sort.c:991 src/sort.c:2099 src/sort.c:3136 src/sort.c:3779 #: src/sort.c:3870 src/sort.c:3873 msgid "open failed" msgstr "malsukcesis malfermo" #: src/sort.c:1010 msgid "fflush failed" msgstr "malsukcesis fflush()" #: src/sort.c:1015 src/sort.c:2102 src/sort.c:4777 msgid "close failed" msgstr "malsukcesis fermo" #: src/sort.c:1154 msgid "couldn't create temporary file" msgstr "malsukcesis krei provizoran dosieron" #: src/sort.c:1193 #, c-format msgid "couldn't create process for %s -d" msgstr "malsukcesis krei novan procezon por '%s -d'" #: src/sort.c:1266 #, c-format msgid "warning: cannot remove: %s" msgstr "averto: malsukcesis forigi %s" #: src/sort.c:1352 #, c-format msgid "invalid --%s argument %s" msgstr "nevalida argumento por opcio '--%s': %s" #: src/sort.c:1355 #, c-format msgid "minimum --%s argument is %s" msgstr "minimuma argumento por opcio '--%s' estas %s" #: src/sort.c:1370 #, c-format msgid "--%s argument %s too large" msgstr "argumento por opcio '--%s' tro grandas: %s" #: src/sort.c:1373 #, c-format msgid "maximum --%s argument with current rlimit is %s" msgstr "maksimuma argumento por opcio '--%s' je aktuala 'rlimit' estas %s" #: src/sort.c:1455 msgid "number in parallel must be nonzero" msgstr "paralelnombro devas esti pli ol nulo" #: src/sort.c:1538 msgid "stat failed" msgstr "malsukcesis eltrovi statinformon" #: src/sort.c:1800 msgid "read failed" msgstr "malsukcesis lego" #: src/sort.c:2117 #, c-format msgid "string transformation failed" msgstr "malsukcesis transformi signoĉenon" #: src/sort.c:2120 #, c-format msgid "the untransformed string was %s" msgstr "la neŝanĝita ĉeno estas %s" #: src/sort.c:2283 #, c-format msgid "^ no match for key\n" msgstr "^ neniu kongruo por klavo\n" #: src/sort.c:2455 #, c-format msgid "obsolescent key %s used; consider %s instead" msgstr "uziĝis olda klavo %s; pripensu uzi %s anstataŭe" #: src/sort.c:2462 #, c-format msgid "key %lu has zero width and will be ignored" msgstr "klavo %lu havas nulan larĝon kaj ignoriĝos" #: src/sort.c:2471 #, c-format msgid "leading blanks are significant in key %lu; consider also specifying 'b'" msgstr "antaŭiraj spacetoj havas signifon en klavo %lu; pripensu indiki ankaŭ 'b'" #: src/sort.c:2484 #, c-format msgid "key %lu is numeric and spans multiple fields" msgstr "klavo %lu estas numera kaj ampleksas plurajn kampojn" #: src/sort.c:2516 #, c-format msgid "option '-%s' is ignored" msgid_plural "options '-%s' are ignored" msgstr[0] "opcio «-%s» ignoratas" msgstr[1] "opcioj «-%s» ignoratas" #: src/sort.c:2522 #, c-format msgid "option '-r' only applies to last-resort comparison" msgstr "opcio «-r» aplikas nur al lastebla komparo" #: src/sort.c:2796 src/sort.c:2805 msgid "write failed" msgstr "malsukcesis skribo" #: src/sort.c:2848 #, c-format msgid "%s: %s:%s: disorder: " msgstr "%s: %s:%s: malordo: " #: src/sort.c:2851 msgid "standard error" msgstr "ĉeferar-eligujo" #: src/sort.c:3763 msgid "cannot read" msgstr "ne eblas legi" #: src/sort.c:4042 #, c-format msgid "%s: invalid field specification %s" msgstr "%s: nevalida kampindiko %s" #: src/sort.c:4052 #, c-format msgid "options '-%s' are incompatible" msgstr "nekombineblas opcioj «-%s»" #: src/sort.c:4102 #, c-format msgid "%s: invalid count at start of %s" msgstr "%s: nevalida nombro je komenco de %s" #: src/sort.c:4361 msgid "invalid number after '-'" msgstr "nevalida numero post '-'" #: src/sort.c:4368 src/sort.c:4454 src/sort.c:4482 msgid "invalid number after '.'" msgstr "nevalida numero post '.'" #: src/sort.c:4381 src/sort.c:4487 msgid "stray character in field spec" msgstr "hazarda signo en kampindiko" #: src/sort.c:4428 msgid "multiple compress programs specified" msgstr "pluraj kunpremaj programoj indikatas" #: src/sort.c:4445 msgid "invalid number at field start" msgstr "nevalida numero je kampkomenco" #: src/sort.c:4449 src/sort.c:4477 msgid "field number is zero" msgstr "kampnumero estas nulo" #: src/sort.c:4458 msgid "character offset is zero" msgstr "signopozicio estas nulo" #: src/sort.c:4473 msgid "invalid number after ','" msgstr "nevalida numero post ','" #: src/sort.c:4523 msgid "empty tab" msgstr "vaka tabo" #: src/sort.c:4606 src/wc.c:889 #, c-format msgid "cannot read file names from %s" msgstr "malsukcesis legi dosiernomojn el %s" #: src/sort.c:4628 #, c-format msgid "%s:%lu: invalid zero-length file name" msgstr "%s:%lu: nevalida dosiernomo (longo nulas)" #: src/sort.c:4634 #, c-format msgid "no input from %s" msgstr "neniu enigo el %s" #: src/sort.c:4687 #, fuzzy, c-format #| msgid "using %s sorting rules" msgid "text ordering performed using %s sorting rules" msgstr "uzatas %s ordigaj reguloj" #: src/sort.c:4691 #, fuzzy #| msgid "using simple byte comparison" msgid "text ordering performed using simple byte comparison" msgstr "uzatas simpla bajtkomparo" #: src/sort.c:4723 #, c-format msgid "extra operand %s not allowed with -%c" msgstr "aldona argumento %s ne permesatas por '-%c'" #: src/split.c:209 #, fuzzy, c-format msgid "the suffix length needs to be at least %" msgstr "longo de sufikso nepras esti almenaŭ %zu" #: src/split.c:226 #, fuzzy, c-format msgid "Usage: %s [OPTION]... [FILE [PREFIX]]\n" msgstr "Uzmaniero: %s [OPCIO...] [ENIGO [PREFIKSO]]\n" #: src/split.c:230 msgid "" "Output pieces of FILE to PREFIXaa, PREFIXab, ...;\n" "default size is 1000 lines, and default PREFIX is 'x'.\n" msgstr "" #: src/split.c:238 #, c-format msgid "" " -a, --suffix-length=N generate suffixes of length N (default %d)\n" " --additional-suffix=SUFFIX append an additional SUFFIX to file names\n" " -b, --bytes=SIZE put SIZE bytes per output file\n" " -C, --line-bytes=SIZE put at most SIZE bytes of records per output file\n" " -d use numeric suffixes starting at 0, not alphabetic\n" " --numeric-suffixes[=FROM] same as -d, but allow setting the start value\n" " -x use hex suffixes starting at 0, not alphabetic\n" " --hex-suffixes[=FROM] same as -x, but allow setting the start value\n" " -e, --elide-empty-files do not generate empty output files with '-n'\n" " --filter=COMMAND write to shell COMMAND; file name is $FILE\n" " -l, --lines=NUMBER put NUMBER lines/records per output file\n" " -n, --number=CHUNKS generate CHUNKS output files; see explanation below\n" " -t, --separator=SEP use SEP instead of newline as the record separator;\n" " '\\0' (zero) specifies the NUL character\n" " -u, --unbuffered immediately copy input to output with '-n r/...'\n" msgstr "" #: src/split.c:256 msgid "" " --verbose print a diagnostic just before each\n" " output file is opened\n" msgstr "" #: src/split.c:263 msgid "" "\n" "CHUNKS may be:\n" " N split into N files based on size of input\n" " K/N output Kth of N to stdout\n" " l/N split into N files without splitting lines/records\n" " l/K/N output Kth of N to stdout without splitting lines/records\n" " r/N like 'l' but use round robin distribution\n" " r/K/N likewise but only output Kth of N to stdout\n" msgstr "" #: src/split.c:450 msgid "output file suffixes exhausted" msgstr "elirdosieraj sufiksoj elĉerpiĝis" #: src/split.c:462 #, c-format msgid "creating file %s\n" msgstr "kreiĝas dosiero %s\n" #: src/split.c:471 #, c-format msgid "%s would overwrite input; aborting" msgstr "%s anstataŭigus la enigon -- abortiĝas" #: src/split.c:488 msgid "failed to set FILE environment variable" msgstr "malsukcesis agordi ĉirkaŭaĵan variablon FILE" #: src/split.c:490 #, c-format msgid "executing with FILE=%s\n" msgstr "plenumiĝas kun FILE=%s\n" #: src/split.c:492 msgid "failed to create pipe" msgstr "malsukcesis krei dukton" #: src/split.c:506 msgid "closing prior pipe" msgstr "fermiĝas antaŭa dukto" #: src/split.c:508 msgid "closing output pipe" msgstr "fermiĝas eliga dukto" #: src/split.c:512 msgid "moving input pipe" msgstr "moviĝas eniga dukto" #: src/split.c:514 msgid "closing input pipe" msgstr "fermiĝas eniga dukto" #: src/split.c:519 #, c-format msgid "failed to run command: \"%s -c %s\"" msgstr "malsukcesis ruli komandon \"%s -c %s\"" #: src/split.c:525 msgid "failed to close input pipe" msgstr "malsukcesis fermi enigan dukton" #: src/split.c:561 msgid "waiting for child process" msgstr "atendado pri ida procezo" #: src/split.c:571 #, c-format msgid "with FILE=%s, signal %s from command: %s" msgstr "kun FILE=%s, signalo %s el komando %s" #: src/split.c:579 #, c-format msgid "with FILE=%s, exit %d from command: %s" msgstr "kun FILE=%s, eliro %d el komando %s" #: src/split.c:586 #, c-format msgid "unknown status from command (0x%X)" msgstr "nekonata rezulto (0x%X) el komando" #: src/split.c:1277 #, c-format msgid "cannot split in more than one way" msgstr "maleblas dividi en pluraj manieroj" #: src/split.c:1289 src/split.c:1404 src/split.c:1605 #, fuzzy msgid "invalid number of chunks" msgstr "nevalida nombro da pecoj: %s" #: src/split.c:1294 #, fuzzy msgid "invalid chunk number" msgstr "nevalida pecnumero: %s" #: src/split.c:1341 #, fuzzy msgid "invalid suffix length" msgstr "nevalida sufikslongo: %s" #: src/split.c:1415 msgid "empty record separator" msgstr "" #: src/split.c:1426 #, fuzzy, c-format msgid "multi-character separator %s" msgstr "plursigna tabo %s" #: src/split.c:1434 #, fuzzy msgid "multiple separator characters specified" msgstr "multipleksorata signoaparatdosiero" #: src/split.c:1465 #, c-format msgid "line count option -%s%c... is too large" msgstr "lininombro '-%s%c...' tro grandas" #: src/split.c:1482 #, c-format msgid "%s: invalid start value for numerical suffix" msgstr "%s: nevalida komenca valoro por numera sufikso" #: src/split.c:1483 #, fuzzy, c-format #| msgid "%s: invalid start value for numerical suffix" msgid "%s: invalid start value for hexadecimal suffix" msgstr "%s: nevalida komenca valoro por numera sufikso" #: src/split.c:1507 #, fuzzy msgid "invalid IO block size" msgstr "nevalida grando por IO-bloko: %s" #: src/split.c:1525 #, c-format msgid "--filter does not process a chunk extracted to stdout" msgstr "opcio «--filter» ne pritraktas pecon eligatan al ĉefeligujo" #: src/split.c:1565 #, c-format msgid "numerical suffix start value is too large for the suffix length" msgstr "komenca valoro de numereca sufikso tro grandas por sufikslongo" #: src/split.c:1597 #, c-format msgid "%s: cannot determine file size" msgstr "%s: ne eblas eltrovi dosiergrandon" #. This is a proper name. See the gettext manual, section Names. #: src/stat.c:197 msgid "Michael Meskes" msgstr "Majkel MESKES (Michael Meskes)" #: src/stat.c:999 #, c-format msgid "failed to canonicalize %s" msgstr "malsukcesis normaligi %s" #: src/stat.c:1102 #, c-format msgid "warning: unrecognized escape '\\%c'" msgstr "averto: nerekonata eskapsigno '\\%c'" #: src/stat.c:1164 #, c-format msgid "%s: invalid directive" msgstr "nevalida indiko: %s" #: src/stat.c:1226 #, c-format msgid "warning: backslash at end of format" msgstr "averto: malsuprenstreko je aranĝofino" #: src/stat.c:1257 #, c-format msgid "using %s to denote standard input does not work in file system mode" msgstr "uzi %s por indiki ĉefenigujo ne funkcias en dosiersistema moduso" #: src/stat.c:1264 #, c-format msgid "cannot read file system information for %s" msgstr "malsukcesis legi en dosiersistemo informon pri %s" #: src/stat.c:1388 src/stat.c:1455 #, c-format msgid "cannot stat standard input" msgstr "malsukcesis eltrovi statinformon pri ĉefenigujo" #: src/stat.c:1390 #, fuzzy, c-format #| msgid "cannot stat %s" msgid "cannot statx %s" msgstr "malsukcesis eltrovi statinformon pri %s" #. TRANSLATORS: This string uses format specifiers from #. 'stat --help' with --file-system, and NOT from printf. #: src/stat.c:1650 msgid "" " File: \"%n\"\n" " ID: %-8i Namelen: %-7l Type: %T\n" "Block size: %-10s Fundamental block size: %S\n" "Blocks: Total: %-10b Free: %-10f Available: %a\n" "Inodes: Total: %-10c Free: %d\n" msgstr "" " Dosiero: \"%n\"\n" " ID: %-8i Nomlongo: %-7l Tipo: %T\n" "Blokgrando: %-10s Baza blokgrando: %S\n" "Blokoj -- Tutaj: %-10b Liberaj: %-10f Disponeblaj: %a\n" "I-nodoj -- Tutaj: %-10c Liberaj: %d\n" #. TRANSLATORS: This string uses format specifiers from #. 'stat --help' without --file-system, and NOT from printf. #: src/stat.c:1671 msgid "" " File: %N\n" " Size: %-10s\tBlocks: %-10b IO Block: %-6o %F\n" msgstr "" " Dosiero: %N\n" " Grando: %-10s Blokoj: %-10b IO-bloko: %-6o %F\n" #. TRANSLATORS: This string uses format specifiers from #. 'stat --help' without --file-system, and NOT from printf. #: src/stat.c:1681 #, fuzzy #| msgid "Device: %Dh/%dd\tInode: %-10i Links: %-5h Device type: %t,%T\n" msgid "Device: %Hd,%Ld\tInode: %-10i Links: %-5h Device type: %Hr,%Lr\n" msgstr "Aparato: %Dh/%dd I-nodo: %-10i Ligoj: %-5h Aparattipo: %t,%T\n" #. TRANSLATORS: This string uses format specifiers from #. 'stat --help' without --file-system, and NOT from printf. #: src/stat.c:1689 #, fuzzy #| msgid "Device: %Dh/%dd\tInode: %-10i Links: %h\n" msgid "Device: %Hd,%Ld\tInode: %-10i Links: %h\n" msgstr "Aparato: %Dh/%dd I-nodo: %-10i Ligoj: %h\n" #. TRANSLATORS: This string uses format specifiers from #. 'stat --help' without --file-system, and NOT from printf. #: src/stat.c:1698 msgid "Access: (%04a/%10.10A) Uid: (%5u/%8U) Gid: (%5g/%8G)\n" msgstr "Atingo: (%04a/%10.10A) UID: (%5u/%8U) GID: (%5g/%8G)\n" #. TRANSLATORS: This string uses format specifiers from #. 'stat --help' without --file-system, and NOT from printf. #: src/stat.c:1708 #, c-format msgid "Context: %C\n" msgstr "Kunteksto: %C\n" #: src/stat.c:1716 msgid "" "Access: %x\n" "Modify: %y\n" "Change: %z\n" " Birth: %w\n" msgstr "" "Atingo: %x\n" "Modifo: %y\n" "Ŝanĝo: %z\n" "Kreo: %w\n" #: src/stat.c:1734 msgid "Display file or file system status.\n" msgstr "" #: src/stat.c:1740 msgid "" " -L, --dereference follow links\n" " -f, --file-system display file system status instead of file status\n" msgstr "" #: src/stat.c:1744 msgid "" " --cached=MODE specify how to use cached attributes;\n" " useful on remote file systems. See MODE below\n" msgstr "" #: src/stat.c:1748 msgid "" " -c --format=FORMAT use the specified FORMAT instead of the default;\n" " output a newline after each use of FORMAT\n" " --printf=FORMAT like --format, but interpret backslash escapes,\n" " and do not output a mandatory trailing newline;\n" " if you want a newline, include \\n in FORMAT\n" " -t, --terse print the information in terse form\n" msgstr "" #: src/stat.c:1759 msgid "" "\n" "The MODE argument of --cached can be: always, never, or default.\n" "'always' will use cached attributes if available, while\n" "'never' will try to synchronize with the latest attributes, and\n" "'default' will leave it up to the underlying file system.\n" msgstr "" #: src/stat.c:1766 msgid "" "\n" "The valid format sequences for files (without --file-system):\n" "\n" " %a permission bits in octal (note '#' and '0' printf flags)\n" " %A permission bits and file type in human readable form\n" " %b number of blocks allocated (see %B)\n" " %B the size in bytes of each block reported by %b\n" " %C SELinux security context string\n" msgstr "" #: src/stat.c:1775 msgid "" " %d device number in decimal (st_dev)\n" " %D device number in hex (st_dev)\n" " %Hd major device number in decimal\n" " %Ld minor device number in decimal\n" " %f raw mode in hex\n" " %F file type\n" " %g group ID of owner\n" " %G group name of owner\n" msgstr "" #: src/stat.c:1785 msgid "" " %h number of hard links\n" " %i inode number\n" " %m mount point\n" " %n file name\n" " %N quoted file name with dereference if symbolic link\n" " %o optimal I/O transfer size hint\n" " %s total size, in bytes\n" " %r device type in decimal (st_rdev)\n" " %R device type in hex (st_rdev)\n" " %Hr major device type in decimal, for character/block device special files\n" " %Lr minor device type in decimal, for character/block device special files\n" " %t major device type in hex, for character/block device special files\n" " %T minor device type in hex, for character/block device special files\n" msgstr "" #: src/stat.c:1800 msgid "" " %u user ID of owner\n" " %U user name of owner\n" " %w time of file birth, human-readable; - if unknown\n" " %W time of file birth, seconds since Epoch; 0 if unknown\n" " %x time of last access, human-readable\n" " %X time of last access, seconds since Epoch\n" " %y time of last data modification, human-readable\n" " %Y time of last data modification, seconds since Epoch\n" " %z time of last status change, human-readable\n" " %Z time of last status change, seconds since Epoch\n" "\n" msgstr "" #: src/stat.c:1814 msgid "" "Valid format sequences for file systems:\n" "\n" " %a free blocks available to non-superuser\n" " %b total data blocks in file system\n" " %c total file nodes in file system\n" " %d free file nodes in file system\n" " %f free blocks in file system\n" msgstr "" #: src/stat.c:1823 msgid "" " %i file system ID in hex\n" " %l maximum length of filenames\n" " %n file name\n" " %s block size (for faster transfers)\n" " %S fundamental block size (for block counts)\n" " %t file system type in hex\n" " %T file system type in human readable form\n" msgstr "" #: src/stat.c:1833 #, c-format msgid "" "\n" "--terse is equivalent to the following FORMAT:\n" " %s" msgstr "" #: src/stat.c:1844 #, c-format msgid "" "--terse --file-system is equivalent to the following FORMAT:\n" " %s" msgstr "" #: src/stdbuf.c:91 #, c-format msgid "Usage: %s OPTION... COMMAND\n" msgstr "Uzmaniero: %s OPCIO... KOMANDO\n" #: src/stdbuf.c:92 msgid "Run COMMAND, with modified buffering operations for its standard streams.\n" msgstr "" #: src/stdbuf.c:98 msgid "" " -i, --input=MODE adjust standard input stream buffering\n" " -o, --output=MODE adjust standard output stream buffering\n" " -e, --error=MODE adjust standard error stream buffering\n" msgstr "" #: src/stdbuf.c:105 msgid "" "\n" "If MODE is 'L' the corresponding stream will be line buffered.\n" "This option is invalid with standard input.\n" msgstr "" #: src/stdbuf.c:108 msgid "" "\n" "If MODE is '0' the corresponding stream will be unbuffered.\n" msgstr "" #: src/stdbuf.c:111 msgid "" "\n" "Otherwise MODE is a number which may be followed by one of the following:\n" "KB 1000, K 1024, MB 1000*1000, M 1024*1024, and so on for G, T, P, E, Z, Y.\n" "Binary prefixes can be used, too: KiB=K, MiB=M, and so on.\n" "In this case the corresponding stream will be fully buffered with the buffer\n" "size set to MODE bytes.\n" msgstr "" #: src/stdbuf.c:118 msgid "" "\n" "NOTE: If COMMAND adjusts the buffering of its standard streams ('tee' does\n" "for example) then that will override corresponding changes by 'stdbuf'.\n" "Also some filters (like 'dd' and 'cat' etc.) don't use streams for I/O,\n" "and are thus unaffected by 'stdbuf' settings.\n" msgstr "" #: src/stdbuf.c:243 #, c-format msgid "failed to find %s" msgstr "malsukcesis trovi %s" #: src/stdbuf.c:267 src/stdbuf.c:300 #, c-format msgid "failed to update the environment with %s" msgstr "malsukcesis ĝisdatigi la ĉirkaŭaĵon kun %s" #: src/stdbuf.c:346 #, c-format msgid "line buffering stdin is meaningless" msgstr "sensencas linibufrado de ĉefenigujo" #: src/stdbuf.c:377 #, c-format msgid "you must specify a buffering mode option" msgstr "nepras indiki opcion por bufra moduso" #: src/stty.c:531 #, c-format msgid "" "Usage: %s [-F DEVICE | --file=DEVICE] [SETTING]...\n" " or: %s [-F DEVICE | --file=DEVICE] [-a|--all]\n" " or: %s [-F DEVICE | --file=DEVICE] [-g|--save]\n" msgstr "" "Uzamniero: %s [-F APARATO | --file=APARATO] [AGORDO...]\n" " aŭ: %s [-F APARATO | --file=APARATO] [-a|--all]\n" " aŭ: %s [-F APARATO | --file=APARATO] [-g|--save]\n" #: src/stty.c:537 msgid "Print or change terminal characteristics.\n" msgstr "" #: src/stty.c:543 msgid "" " -a, --all print all current settings in human-readable form\n" " -g, --save print all current settings in a stty-readable form\n" " -F, --file=DEVICE open and use the specified DEVICE instead of stdin\n" msgstr "" #: src/stty.c:550 msgid "" "\n" "Optional - before SETTING indicates negation. An * marks non-POSIX\n" "settings. The underlying system defines which settings are available.\n" msgstr "" #: src/stty.c:555 msgid "" "\n" "Special characters:\n" msgstr "" #: src/stty.c:559 msgid " * discard CHAR CHAR will toggle discarding of output\n" msgstr "" #: src/stty.c:564 msgid " * dsusp CHAR CHAR will send a terminal stop signal once input flushed\n" msgstr "" #: src/stty.c:568 msgid "" " eof CHAR CHAR will send an end of file (terminate the input)\n" " eol CHAR CHAR will end the line\n" msgstr "" #: src/stty.c:573 msgid " * eol2 CHAR alternate CHAR for ending the line\n" msgstr "" #: src/stty.c:577 msgid "" " erase CHAR CHAR will erase the last character typed\n" " intr CHAR CHAR will send an interrupt signal\n" " kill CHAR CHAR will erase the current line\n" msgstr "" #: src/stty.c:583 msgid " * lnext CHAR CHAR will enter the next character quoted\n" msgstr "" #: src/stty.c:588 msgid " * status CHAR CHAR will send an info signal\n" msgstr "" #: src/stty.c:592 msgid " quit CHAR CHAR will send a quit signal\n" msgstr "" #: src/stty.c:596 msgid " * rprnt CHAR CHAR will redraw the current line\n" msgstr "" #: src/stty.c:600 msgid "" " start CHAR CHAR will restart the output after stopping it\n" " stop CHAR CHAR will stop the output\n" " susp CHAR CHAR will send a terminal stop signal\n" msgstr "" #: src/stty.c:606 msgid " * swtch CHAR CHAR will switch to a different shell layer\n" msgstr "" #: src/stty.c:611 msgid " * werase CHAR CHAR will erase the last word typed\n" msgstr "" #: src/stty.c:615 msgid "" "\n" "Special settings:\n" " N set the input and output speeds to N bauds\n" msgstr "" #: src/stty.c:621 msgid "" " * cols N tell the kernel that the terminal has N columns\n" " * columns N same as cols N\n" msgstr "" #: src/stty.c:626 #, c-format msgid " * [-]drain wait for transmission before applying settings (%s by default)\n" msgstr "" #: src/stty.c:628 msgid "on" msgstr "" #: src/stty.c:628 msgid "off" msgstr "" #: src/stty.c:629 msgid " ispeed N set the input speed to N\n" msgstr "" #: src/stty.c:633 msgid " * line N use line discipline N\n" msgstr "" #: src/stty.c:637 msgid "" " min N with -icanon, set N characters minimum for a completed read\n" " ospeed N set the output speed to N\n" msgstr "" #: src/stty.c:642 msgid "" " * rows N tell the kernel that the terminal has N rows\n" " * size print the number of rows and columns according to the kernel\n" msgstr "" #: src/stty.c:647 msgid "" " speed print the terminal speed\n" " time N with -icanon, set read timeout of N tenths of a second\n" msgstr "" #: src/stty.c:651 msgid "" "\n" "Control settings:\n" " [-]clocal disable modem control signals\n" " [-]cread allow input to be received\n" msgstr "" #: src/stty.c:658 msgid " * [-]crtscts enable RTS/CTS handshaking\n" msgstr "" #: src/stty.c:663 msgid " * [-]cdtrdsr enable DTR/DSR handshaking\n" msgstr "" #: src/stty.c:667 msgid " csN set character size to N bits, N in [5..8]\n" msgstr "" #: src/stty.c:670 msgid "" " [-]cstopb use two stop bits per character (one with '-')\n" " [-]hup send a hangup signal when the last process closes the tty\n" " [-]hupcl same as [-]hup\n" " [-]parenb generate parity bit in output and expect parity bit in input\n" " [-]parodd set odd parity (or even parity with '-')\n" msgstr "" #: src/stty.c:678 msgid " * [-]cmspar use \"stick\" (mark/space) parity\n" msgstr "" #: src/stty.c:682 msgid "" "\n" "Input settings:\n" " [-]brkint breaks cause an interrupt signal\n" " [-]icrnl translate carriage return to newline\n" " [-]ignbrk ignore break characters\n" " [-]igncr ignore carriage return\n" " [-]ignpar ignore characters with parity errors\n" msgstr "" #: src/stty.c:692 msgid " * [-]imaxbel beep and do not flush a full input buffer on a character\n" msgstr "" #: src/stty.c:696 msgid "" " [-]inlcr translate newline to carriage return\n" " [-]inpck enable input parity checking\n" " [-]istrip clear high (8th) bit of input characters\n" msgstr "" #: src/stty.c:702 msgid " * [-]iutf8 assume input characters are UTF-8 encoded\n" msgstr "" #: src/stty.c:707 msgid " * [-]iuclc translate uppercase characters to lowercase\n" msgstr "" #: src/stty.c:712 msgid " * [-]ixany let any character restart output, not only start character\n" msgstr "" #: src/stty.c:716 msgid "" " [-]ixoff enable sending of start/stop characters\n" " [-]ixon enable XON/XOFF flow control\n" " [-]parmrk mark parity errors (with a 255-0-character sequence)\n" " [-]tandem same as [-]ixoff\n" msgstr "" #: src/stty.c:722 msgid "" "\n" "Output settings:\n" msgstr "" #: src/stty.c:727 msgid " * bsN backspace delay style, N in [0..1]\n" msgstr "" #: src/stty.c:732 msgid " * crN carriage return delay style, N in [0..3]\n" msgstr "" #: src/stty.c:737 msgid " * ffN form feed delay style, N in [0..1]\n" msgstr "" #: src/stty.c:742 msgid " * nlN newline delay style, N in [0..1]\n" msgstr "" #: src/stty.c:747 msgid " * [-]ocrnl translate carriage return to newline\n" msgstr "" #: src/stty.c:752 msgid " * [-]ofdel use delete characters for fill instead of NUL characters\n" msgstr "" #: src/stty.c:757 msgid " * [-]ofill use fill (padding) characters instead of timing for delays\n" msgstr "" #: src/stty.c:762 msgid " * [-]olcuc translate lowercase characters to uppercase\n" msgstr "" #: src/stty.c:767 msgid " * [-]onlcr translate newline to carriage return-newline\n" msgstr "" #: src/stty.c:772 msgid " * [-]onlret newline performs a carriage return\n" msgstr "" #: src/stty.c:777 msgid " * [-]onocr do not print carriage returns in the first column\n" msgstr "" #: src/stty.c:781 msgid " [-]opost postprocess output\n" msgstr "" #: src/stty.c:785 msgid "" " * tabN horizontal tab delay style, N in [0..3]\n" " * tabs same as tab0\n" " * -tabs same as tab3\n" msgstr "" #: src/stty.c:792 msgid " * vtN vertical tab delay style, N in [0..1]\n" msgstr "" #: src/stty.c:796 msgid "" "\n" "Local settings:\n" " [-]crterase echo erase characters as backspace-space-backspace\n" msgstr "" #: src/stty.c:802 msgid "" " * crtkill kill all line by obeying the echoprt and echoe settings\n" " * -crtkill kill all line by obeying the echoctl and echok settings\n" msgstr "" #: src/stty.c:808 msgid " * [-]ctlecho echo control characters in hat notation ('^c')\n" msgstr "" #: src/stty.c:812 msgid " [-]echo echo input characters\n" msgstr "" #: src/stty.c:816 msgid " * [-]echoctl same as [-]ctlecho\n" msgstr "" #: src/stty.c:820 msgid "" " [-]echoe same as [-]crterase\n" " [-]echok echo a newline after a kill character\n" msgstr "" #: src/stty.c:825 msgid " * [-]echoke same as [-]crtkill\n" msgstr "" #: src/stty.c:829 msgid " [-]echonl echo newline even if not echoing other characters\n" msgstr "" #: src/stty.c:833 msgid " * [-]echoprt echo erased characters backward, between '\\' and '/'\n" msgstr "" #: src/stty.c:838 msgid " * [-]extproc enable \"LINEMODE\"; useful with high latency links\n" msgstr "" #: src/stty.c:843 msgid " * [-]flusho discard output\n" msgstr "" #: src/stty.c:847 #, c-format msgid "" " [-]icanon enable special characters: %s\n" " [-]iexten enable non-POSIX special characters\n" msgstr "" #: src/stty.c:858 msgid "" " [-]isig enable interrupt, quit, and suspend special characters\n" " [-]noflsh disable flushing after interrupt and quit special characters\n" msgstr "" #: src/stty.c:863 msgid " * [-]prterase same as [-]echoprt\n" msgstr "" #: src/stty.c:868 msgid " * [-]tostop stop background jobs that try to write to the terminal\n" msgstr "" #: src/stty.c:873 msgid " * [-]xcase with icanon, escape with '\\' for uppercase characters\n" msgstr "" #: src/stty.c:877 msgid "" "\n" "Combination settings:\n" msgstr "" #: src/stty.c:882 msgid " * [-]LCASE same as [-]lcase\n" msgstr "" #: src/stty.c:886 msgid "" " cbreak same as -icanon\n" " -cbreak same as icanon\n" msgstr "" #: src/stty.c:890 msgid "" " cooked same as brkint ignpar istrip icrnl ixon opost isig\n" " icanon, eof and eol characters to their default values\n" " -cooked same as raw\n" msgstr "" #: src/stty.c:895 #, c-format msgid " crt same as %s\n" msgstr "" #: src/stty.c:905 #, c-format msgid "" " dec same as %s intr ^c erase 0177\n" " kill ^u\n" msgstr "" #: src/stty.c:920 msgid " * [-]decctlq same as [-]ixany\n" msgstr "" #: src/stty.c:924 msgid "" " ek erase and kill characters to their default values\n" " evenp same as parenb -parodd cs7\n" " -evenp same as -parenb cs8\n" msgstr "" #: src/stty.c:930 msgid " * [-]lcase same as xcase iuclc olcuc\n" msgstr "" #: src/stty.c:934 msgid "" " litout same as -parenb -istrip -opost cs8\n" " -litout same as parenb istrip opost cs7\n" msgstr "" #: src/stty.c:938 #, c-format msgid "" " nl same as %s\n" " -nl same as %s\n" msgstr "" #: src/stty.c:956 msgid "" " oddp same as parenb parodd cs7\n" " -oddp same as -parenb cs8\n" " [-]parity same as [-]evenp\n" " pass8 same as -parenb -istrip cs8\n" " -pass8 same as parenb istrip cs7\n" msgstr "" #: src/stty.c:963 #, c-format msgid "" " raw same as -ignbrk -brkint -ignpar -parmrk -inpck -istrip\n" " -inlcr -igncr -icrnl -ixon -ixoff -icanon -opost\n" " -isig%s min 1 time 0\n" " -raw same as cooked\n" msgstr "" #: src/stty.c:982 #, c-format msgid "" " sane same as cread -ignbrk brkint -inlcr -igncr icrnl\n" " icanon iexten echo echoe echok -echonl -noflsh\n" " %s\n" " %s\n" " %s,\n" " all special characters to their default values\n" msgstr "" #: src/stty.c:1068 msgid "" "\n" "Handle the tty line connected to standard input. Without arguments,\n" "prints baud rate, line discipline, and deviations from stty sane. In\n" "settings, CHAR is taken literally, or coded as in ^c, 0x37, 0177 or\n" "127; special values ^- or undef used to disable special characters.\n" msgstr "" "\n" "Regas la tty-lineon konektatan al ĉefenigujo. Sen argumentoj, eligas\n" "rapidecon, linean protokolon, kaj diferencojn disde '/stty sane'. En ecoj,\n" "SIGNO prezentas sin mem, aŭ estas kodita (ekzemple ^c, 0x37, 0177, aŭ 127);\n" "la specialaj valoroj '^-' aŭ 'undef' malebligas specialajn signojn.\n" #: src/stty.c:1097 #, c-format msgid "missing argument to %s" msgstr "mankas argumento al %s" #: src/stty.c:1140 src/stty.c:1258 #, c-format msgid "invalid argument %s" msgstr "nevalida argumento %s" #: src/stty.c:1192 #, fuzzy, c-format msgid "%s: error setting %s" msgstr "%s: eraro dum trunkado" #: src/stty.c:1234 #, c-format msgid "invalid line discipline %s" msgstr "nevalida protokolo %s por lineo" #: src/stty.c:1326 msgid "only one device may be specified" msgstr "eblas indiki nur unu aparaton" #: src/stty.c:1360 msgid "" "the options for verbose and stty-readable output styles are\n" "mutually exclusive" msgstr "nekombineblas opcioj '-a' kaj '-g' (por hom-legebla kaj stty-legebla eligo)" #: src/stty.c:1366 msgid "when specifying an output style, modes may not be set" msgstr "ne permesatas indiki reĝimon kune kun indiko de eligostilo" #: src/stty.c:1384 #, c-format msgid "%s: couldn't reset non-blocking mode" msgstr "%s: malsukcesis reagordi nebarantan moduson" #: src/stty.c:1447 #, c-format msgid "%s: unable to perform all requested operations" msgstr "%s: ne eblas efiki ĉiujn petatajn operaciojn" #: src/stty.c:1792 #, c-format msgid "%s: no size information for this device" msgstr "%s: mankas informo pri grando de ĉi tiu aparato" #: src/stty.c:2321 #, fuzzy msgid "invalid integer argument" msgstr "nevalida entjerargumento %s" #: src/sync.c:64 #, fuzzy, c-format msgid "Usage: %s [OPTION] [FILE]...\n" msgstr "Uzmaniero: %s [OPCIO...] [DOSIERO...]\n" #: src/sync.c:65 msgid "" "Synchronize cached writes to persistent storage\n" "\n" "If one or more files are specified, sync only them,\n" "or their containing file systems.\n" "\n" msgstr "" #: src/sync.c:73 msgid " -d, --data sync only file data, no unneeded metadata\n" msgstr "" #: src/sync.c:76 msgid " -f, --file-system sync the file systems that contain the files\n" msgstr "" #: src/sync.c:115 #, fuzzy, c-format msgid "error opening %s" msgstr "eraro dum legado de %s" #: src/sync.c:126 #, fuzzy, c-format msgid "couldn't reset non-blocking mode %s" msgstr "%s: malsukcesis reagordi nebarantan moduson" #: src/sync.c:157 #, fuzzy, c-format msgid "error syncing %s" msgstr "eraro dum legado de %s" #: src/sync.c:215 msgid "cannot specify both --data and --file-system" msgstr "" #: src/sync.c:219 msgid "--data needs at least one argument" msgstr "" #: src/system.h:347 #, c-format msgid "" "\n" "NOTE: your shell may have its own version of %s, which usually supersedes\n" "the version described here. Please refer to your shell's documentation\n" "for details about the options it supports.\n" msgstr "" #: src/system.h:353 msgid " --help display this help and exit\n" msgstr " --help montri ĉi tiun helpon kaj eliri\n" #: src/system.h:355 msgid " --version output version information and exit\n" msgstr " --version montri programversion kaj eliri\n" #: src/system.h:583 msgid "" "\n" "With no FILE, or when FILE is -, read standard input.\n" msgstr "" "\n" "Sen DOSIERO, aŭ kiam DOSIERO estas «-», ĉefenigujo legiĝas.\n" #: src/system.h:590 msgid "" "\n" "Mandatory arguments to long options are mandatory for short options too.\n" msgstr "" "\n" "(Endaj argumentoj por longaj opcioj ankaŭ endas por la mallongaj.)\n" #: src/system.h:598 msgid "" "\n" "The SIZE argument is an integer and optional unit (example: 10K is 10*1024).\n" "Units are K,M,G,T,P,E,Z,Y (powers of 1024) or KB,MB,... (powers of 1000).\n" "Binary prefixes can be used, too: KiB=K, MiB=M, and so on.\n" msgstr "" #: src/system.h:608 #, c-format msgid "" "\n" "Display values are in units of the first available SIZE from --block-size,\n" "and the %s_BLOCK_SIZE, BLOCK_SIZE and BLOCKSIZE environment variables.\n" "Otherwise, units default to 1024 bytes (or 512 if POSIXLY_CORRECT is set).\n" msgstr "" #: src/system.h:618 msgid "" "\n" "The backup suffix is '~', unless set with --suffix or SIMPLE_BACKUP_SUFFIX.\n" "The version control method may be selected via the --backup option or through\n" "the VERSION_CONTROL environment variable. Here are the values:\n" "\n" msgstr "" "\n" "La savkopia sufikso estas «~», krom se agordita per «--suffix» aŭ per ĉirkaŭaĵa\n" "variablo «SIMPLE_BACKUP_SUFFIX». La versirega metodo elekteblas per «--backup»\n" "aŭ per ĉirkaŭaĵa variablo «VERSION_CONTROL». Jen la eblaj metodoj:\n" "\n" #: src/system.h:625 msgid "" " none, off never make backups (even if --backup is given)\n" " numbered, t make numbered backups\n" " existing, nil numbered if numbered backups exist, simple otherwise\n" " simple, never always make simple backups\n" msgstr "" " none, off neniam fari savkopiojn (eĉ se nuran «--backup» indikatas)\n" " numbered, t fari numeratajn savkopiojn\n" " existing, nil numeratajn se numeratajn savkopiojn ekzistas, alie simplajn\n" " simple, never ĉiam fari simplajn savkopiojn\n" #: src/system.h:655 #, c-format msgid "" "\n" "%s online help: <%s>\n" msgstr "" "\n" "Helpo pri «%s» en la reto: <%s>\n" #. TRANSLATORS: Replace LANG_CODE in this URL with your language code #. to form one of #. the URLs at https://translationproject.org/team/. Otherwise, replace #. the entire URL with your translation team's email address. #: src/system.h:666 #, fuzzy #| msgid "Report %s translation bugs to \n" msgid "Report any translation bugs to \n" msgstr "Sciigu tradukerarojn en «%s» al .\n" #: src/system.h:669 #, c-format msgid "Full documentation <%s%s>\n" msgstr "" #: src/system.h:671 #, c-format msgid "or available locally via: info '(coreutils) %s%s'\n" msgstr "" #: src/system.h:682 #, c-format msgid "Try '%s --help' for more information.\n" msgstr "Tajpu '%s --help' por pli da informoj.\n" #: src/system.h:726 #, c-format msgid "" "WARNING: Circular directory structure.\n" "This almost certainly means that you have a corrupted file system.\n" "NOTIFY YOUR SYSTEM MANAGER.\n" "The following directory is part of the cycle:\n" " %s\n" msgstr "" #. This is a proper name. See the gettext manual, section Names. #: src/tac.c:57 msgid "Jay Lepreau" msgstr "Ĝej LEPRO (Jay Lepreau)" #: src/tac.c:136 #, fuzzy msgid "Write each FILE to standard output, last line first.\n" msgstr "" "Skribas kun inversa liniordo ĉiun indikatan DOSIEROn al ĉefeligujo.\n" "Sen DOSIERO, aŭ kiam DOSIERO estas «-», ĉefenigujo legiĝas.\n" #: src/tac.c:143 msgid "" " -b, --before attach the separator before instead of after\n" " -r, --regex interpret the separator as a regular expression\n" " -s, --separator=STRING use STRING as the separator instead of newline\n" msgstr "" #: src/tac.c:223 src/tac.c:233 src/tac.c:343 #, c-format msgid "%s: seek failed" msgstr "malsukcesis 'seek' sur %s" #: src/tac.c:276 msgid "record too large" msgstr "rikordo tro grandas" #: src/tac.c:458 #, c-format msgid "failed to create temporary file in %s" msgstr "malsukcesis krei provizoran dosieron en %s" #: src/tac.c:466 #, c-format msgid "failed to open %s for writing" msgstr "malsukcesis malfermi %s por skribado" #: src/tac.c:484 #, c-format msgid "failed to rewind stream for %s" msgstr "malsukcesis revolvi fluon por %s" #: src/tac.c:521 src/tac.c:533 #, c-format msgid "%s: write error" msgstr "%s: skrib-eraro" #: src/tac.c:582 #, c-format msgid "failed to open %s for reading" msgstr "malsukcesis malfermi %s por legi" #: src/tac.c:650 msgid "separator cannot be empty" msgstr "disigilo ne povas esti vaka" #. This is a proper name. See the gettext manual, section Names. #: src/tail.c:75 msgid "Ian Lance Taylor" msgstr "Ien Lans TEJLOR (Ian Lance Taylor)" #: src/tail.c:266 #, fuzzy, c-format msgid "" "Print the last %d lines of each FILE to standard output.\n" "With more than one FILE, precede each with a header giving the file name.\n" msgstr "" "Eligas la %d lastajn liniojn de ĉiu indikata DOSIERO al ĉefeligujo.\n" "Kun pli ol unu DOSIERO, eligas la dosiernomon antaŭ la liniojn.\n" "Sen DOSIERO, aŭ kiam DOSIERO estas «-», ĉefenigujo legiĝas.\n" #: src/tail.c:274 msgid "" " -c, --bytes=[+]NUM output the last NUM bytes; or use -c +NUM to\n" " output starting with byte NUM of each file\n" msgstr "" #: src/tail.c:278 msgid "" " -f, --follow[={name|descriptor}]\n" " output appended data as the file grows;\n" " an absent option argument means 'descriptor'\n" " -F same as --follow=name --retry\n" msgstr "" #: src/tail.c:284 #, c-format msgid "" " -n, --lines=[+]NUM output the last NUM lines, instead of the last %d;\n" " or use -n +NUM to output starting with line NUM\n" " --max-unchanged-stats=N\n" " with --follow=name, reopen a FILE which has not\n" " changed size after N (default %d) iterations\n" " to see if it has been unlinked or renamed\n" " (this is the usual case of rotated log files);\n" " with inotify, this option is rarely useful\n" msgstr "" #: src/tail.c:297 msgid "" " --pid=PID with -f, terminate after process ID, PID dies\n" " -q, --quiet, --silent never output headers giving file names\n" " --retry keep trying to open a file if it is inaccessible\n" msgstr "" #: src/tail.c:302 msgid "" " -s, --sleep-interval=N with -f, sleep for approximately N seconds\n" " (default 1.0) between iterations;\n" " with inotify and --pid=P, check process P at\n" " least once every N seconds\n" " -v, --verbose always output headers giving file names\n" msgstr "" #: src/tail.c:314 #, fuzzy msgid "" "\n" "NUM may have a multiplier suffix:\n" "b 512, kB 1000, K 1024, MB 1000*1000, M 1024*1024,\n" "GB 1000*1000*1000, G 1024*1024*1024, and so on for T, P, E, Z, Y.\n" "Binary prefixes can be used, too: KiB=K, MiB=M, and so on.\n" "\n" msgstr "" "\n" "NOMBRO povas havi obligilan sufikson:\n" "b = 512, kB = 1000, K = 1024, MB = 1000*1000, M = 1024*1024,\n" "GB = 1000*1000*1000, G = 1024*1024*1024, ktp por T, P, E, Z, Y.\n" #: src/tail.c:322 msgid "" "With --follow (-f), tail defaults to following the file descriptor, which\n" "means that even if a tail'ed file is renamed, tail will continue to track\n" "its end. This default behavior is not desirable when you really want to\n" "track the actual name of the file, not the file descriptor (e.g., log\n" "rotation). Use --follow=name in that case. That causes tail to track the\n" "named file in a way that accommodates renaming, removal and creation.\n" msgstr "" #: src/tail.c:398 #, c-format msgid "closing %s (fd=%d)" msgstr "fermiĝas %s (dosiernumero=%d)" #: src/tail.c:497 #, c-format msgid "%s: cannot seek to end-relative offset %s" msgstr "%s: ne eblas fari 'seek' al finrelativa pozicio %s" #: src/tail.c:931 #, c-format msgid "cannot determine location of %s. reverting to polling" msgstr "ne eblas eltrovi lokon de %s; uzatas nun skrutinio" #: src/tail.c:987 #, fuzzy, c-format msgid "%s has been replaced with an untailable symbolic link" msgstr "%s anstataŭiĝis per nesekvebla dosiero; rezignatas pri ĉi tiu nomo" #: src/tail.c:1002 #, c-format msgid "%s has become inaccessible" msgstr "%s iĝis neatingebla" #: src/tail.c:1020 #, fuzzy, c-format msgid "%s has been replaced with an untailable file%s" msgstr "%s anstataŭiĝis per nesekvebla dosiero; rezignatas pri ĉi tiu nomo" #: src/tail.c:1022 src/tail.c:2033 msgid "; giving up on this name" msgstr "" #: src/tail.c:1028 #, fuzzy, c-format msgid "%s has been replaced with an untailable remote file" msgstr "%s anstataŭiĝis per nesekvebla dosiero; rezignatas pri ĉi tiu nomo" #: src/tail.c:1049 #, c-format msgid "%s has become accessible" msgstr "%s iĝis atingebla" #: src/tail.c:1061 #, fuzzy, c-format msgid "%s has appeared; following new file" msgstr "%s aperis; sekvatas fino de nova dosiero" #: src/tail.c:1071 #, fuzzy, c-format msgid "%s has been replaced; following new file" msgstr "%s anstataŭiĝis; sekvatas fino de nova dosiero" #: src/tail.c:1186 #, c-format msgid "%s: cannot change nonblocking mode" msgstr "%s: ne eblas ŝanĝi nebarantan moduson" #: src/tail.c:1232 src/tail.c:1407 #, c-format msgid "%s: file truncated" msgstr "%s: dosiero trunkitas" #: src/tail.c:1266 src/tail.c:1613 #, c-format msgid "no files remaining" msgstr "ne restas dosieroj" #: src/tail.c:1502 #, c-format msgid "cannot watch parent directory of %s" msgstr "ne eblas rigardadi patran dosierujon de %s" #: src/tail.c:1505 src/tail.c:1522 src/tail.c:1737 #, c-format msgid "inotify resources exhausted" msgstr "mankas sufiĉaj risurcoj por 'inotify'" #: src/tail.c:1526 src/tail.c:1745 #, c-format msgid "cannot watch %s" msgstr "ne eblas rigardadi %s" #: src/tail.c:1580 #, c-format msgid "%s was replaced" msgstr "%s anstataŭiĝis" #: src/tail.c:1661 #, fuzzy #| msgid "error reading inotify event" msgid "error waiting for inotify and output events" msgstr "eraro dum legado de 'inotify'-evento" #: src/tail.c:1680 msgid "error reading inotify event" msgstr "eraro dum legado de 'inotify'-evento" #: src/tail.c:1699 #, c-format msgid "directory containing watched file was removed" msgstr "" #: src/tail.c:2031 #, fuzzy, c-format msgid "%s: cannot follow end of this type of file%s" msgstr "%s anstataŭiĝis per fora dosiero; rezignatas pri ĉi tiu nomo" #: src/tail.c:2212 msgid "invalid maximum number of unchanged stats between opens" msgstr "nevalida nombro da senŝanĝaj statinformoj inter malfermoj" #: src/tail.c:2220 msgid "invalid PID" msgstr "nevalida PID" #: src/tail.c:2236 #, c-format msgid "invalid number of seconds: %s" msgstr "nevalida nombro da sekundoj: %s" #: src/tail.c:2255 #, c-format msgid "option used in invalid context -- %c" msgstr "opcio uzatas en nevalida kunteksto -- %c" #: src/tail.c:2267 #, c-format msgid "warning: --retry ignored; --retry is useful only when following" msgstr "averto: opcio '--retry' ignoriĝas; ĝi utilas nur dum sekvado" #: src/tail.c:2271 #, c-format msgid "warning: --retry only effective for the initial open" msgstr "averto: opcio '--retry' efikas nur dum unua malfermo" #: src/tail.c:2276 #, c-format msgid "warning: PID ignored; --pid=PID is useful only when following" msgstr "averto: PID ignoriĝas; opcio '--pid=PID' utilas nur dum sekvado" #: src/tail.c:2279 #, c-format msgid "warning: --pid=PID is not supported on this system" msgstr "averto: opcio '--pid=PID' ne subtenatas en ĉi tiu sistemo" #: src/tail.c:2385 #, c-format msgid "cannot follow %s by name" msgstr "ne eblas sekvi %s je nomo" #: src/tail.c:2400 #, c-format msgid "warning: following standard input indefinitely is ineffective" msgstr "averto: sekvi senĉese ĉefenigujon ne efikas" #: src/tail.c:2492 #, c-format msgid "inotify cannot be used, reverting to polling" msgstr "ne eblas uzi 'inotify'; uzatas nun skrutinio" #: src/tee.c:88 msgid "" "Copy standard input to each FILE, and also to standard output.\n" "\n" " -a, --append append to the given FILEs, do not overwrite\n" " -i, --ignore-interrupts ignore interrupt signals\n" msgstr "" "Kopias ĉefenigujon al ĉiu indikata DOSIERO, kaj ankaŭ al ĉefeligujo.\n" "\n" " -a, --append postglui al la indikataj DOSIEROj, ne anstataŭigi\n" " -i, --ignore-interrrupts ignori interrompsignalojn\n" #: src/tee.c:94 msgid "" " -p diagnose errors writing to non pipes\n" " --output-error[=MODE] set behavior on write error. See MODE below\n" msgstr "" #: src/tee.c:100 msgid "" "\n" "MODE determines behavior with write errors on the outputs:\n" " 'warn' diagnose errors writing to any output\n" " 'warn-nopipe' diagnose errors writing to any output not a pipe\n" " 'exit' exit on error writing to any output\n" " 'exit-nopipe' exit on error writing to any output not a pipe\n" "The default MODE for the -p option is 'warn-nopipe'.\n" "The default operation when --output-error is not specified, is to\n" "exit immediately on error writing to a pipe, and diagnose errors\n" "writing to non pipe outputs.\n" msgstr "" #: src/test.c:126 #, c-format msgid "missing argument after %s" msgstr "mankas argumento post %s" #: src/test.c:162 #, c-format msgid "invalid integer %s" msgstr "nevalida entjero %s" #: src/test.c:244 #, c-format msgid "%s expected" msgstr "%s atendatas" #: src/test.c:247 #, c-format msgid "%s expected, found %s" msgstr "%s atendatas, %s trovitas" #: src/test.c:328 msgid "-nt does not accept -l" msgstr "'-nt' ne akceptas '-l'" #: src/test.c:341 msgid "-ef does not accept -l" msgstr "'-ef' ne akceptas '-l'" #: src/test.c:357 msgid "-ot does not accept -l" msgstr "'-ot' ne akceptas '-l'" #: src/test.c:366 #, c-format msgid "%s: unknown binary operator" msgstr "%s: nekonata duloka operacisigno" #: src/test.c:396 #, c-format msgid "%s: unary operator expected" msgstr "unuloka operacisigno atendatas, %s trovitas" #: src/test.c:632 #, c-format msgid "%s: binary operator expected" msgstr "duloka operacisigno atendatas, %s trovitas" #: src/test.c:690 msgid "" "Usage: test EXPRESSION\n" " or: test\n" " or: [ EXPRESSION ]\n" " or: [ ]\n" " or: [ OPTION\n" msgstr "" "Uzamaniero: test ESPRIMO\n" " aŭ: test\n" " aŭ: [ ESPRIMO ]\n" " aŭ: [ ]\n" " aŭ: [ OPCIO\n" #: src/test.c:697 msgid "" "Exit with the status determined by EXPRESSION.\n" "\n" msgstr "" #: src/test.c:703 msgid "" "\n" "An omitted EXPRESSION defaults to false. Otherwise,\n" "EXPRESSION is true or false and sets exit status. It is one of:\n" msgstr "" #: src/test.c:708 msgid "" "\n" " ( EXPRESSION ) EXPRESSION is true\n" " ! EXPRESSION EXPRESSION is false\n" " EXPRESSION1 -a EXPRESSION2 both EXPRESSION1 and EXPRESSION2 are true\n" " EXPRESSION1 -o EXPRESSION2 either EXPRESSION1 or EXPRESSION2 is true\n" msgstr "" #: src/test.c:715 msgid "" "\n" " -n STRING the length of STRING is nonzero\n" " STRING equivalent to -n STRING\n" " -z STRING the length of STRING is zero\n" " STRING1 = STRING2 the strings are equal\n" " STRING1 != STRING2 the strings are not equal\n" msgstr "" #: src/test.c:723 msgid "" "\n" " INTEGER1 -eq INTEGER2 INTEGER1 is equal to INTEGER2\n" " INTEGER1 -ge INTEGER2 INTEGER1 is greater than or equal to INTEGER2\n" " INTEGER1 -gt INTEGER2 INTEGER1 is greater than INTEGER2\n" " INTEGER1 -le INTEGER2 INTEGER1 is less than or equal to INTEGER2\n" " INTEGER1 -lt INTEGER2 INTEGER1 is less than INTEGER2\n" " INTEGER1 -ne INTEGER2 INTEGER1 is not equal to INTEGER2\n" msgstr "" #: src/test.c:732 msgid "" "\n" " FILE1 -ef FILE2 FILE1 and FILE2 have the same device and inode numbers\n" " FILE1 -nt FILE2 FILE1 is newer (modification date) than FILE2\n" " FILE1 -ot FILE2 FILE1 is older than FILE2\n" msgstr "" #: src/test.c:738 msgid "" "\n" " -b FILE FILE exists and is block special\n" " -c FILE FILE exists and is character special\n" " -d FILE FILE exists and is a directory\n" " -e FILE FILE exists\n" msgstr "" #: src/test.c:745 msgid "" " -f FILE FILE exists and is a regular file\n" " -g FILE FILE exists and is set-group-ID\n" " -G FILE FILE exists and is owned by the effective group ID\n" " -h FILE FILE exists and is a symbolic link (same as -L)\n" " -k FILE FILE exists and has its sticky bit set\n" msgstr "" #: src/test.c:752 msgid "" " -L FILE FILE exists and is a symbolic link (same as -h)\n" " -N FILE FILE exists and has been modified since it was last read\n" " -O FILE FILE exists and is owned by the effective user ID\n" " -p FILE FILE exists and is a named pipe\n" " -r FILE FILE exists and read permission is granted\n" " -s FILE FILE exists and has a size greater than zero\n" msgstr "" #: src/test.c:760 msgid "" " -S FILE FILE exists and is a socket\n" " -t FD file descriptor FD is opened on a terminal\n" " -u FILE FILE exists and its set-user-ID bit is set\n" " -w FILE FILE exists and write permission is granted\n" " -x FILE FILE exists and execute (or search) permission is granted\n" msgstr "" #: src/test.c:767 msgid "" "\n" "Except for -h and -L, all FILE-related tests dereference symbolic links.\n" "Beware that parentheses need to be escaped (e.g., by backslashes) for shells.\n" "INTEGER may also be -l STRING, which evaluates to the length of STRING.\n" msgstr "" #: src/test.c:773 msgid "" "\n" "NOTE: Binary -a and -o are inherently ambiguous. Use 'test EXPR1 && test\n" "EXPR2' or 'test EXPR1 || test EXPR2' instead.\n" msgstr "" #: src/test.c:778 msgid "" "\n" "NOTE: [ honors the --help and --version options, but test does not.\n" "test treats each of those as it treats any other nonempty STRING.\n" msgstr "" #: src/test.c:783 msgid "test and/or [" msgstr "'test' kajaŭ '['" #. This is a proper name. See the gettext manual, section Names. #: src/test.c:795 msgid "Kevin Braunsdorf" msgstr "Kevin BRAŬNSDORF (Kevin Braunsdorf)" #. This is a proper name. See the gettext manual, section Names. #: src/test.c:796 msgid "Matthew Bradburn" msgstr "Mefju BREDBORN (Matthew Bradburn)" #: src/test.c:850 #, c-format msgid "missing %s" msgstr "mankas %s" #: src/test.c:864 #, c-format msgid "extra argument %s" msgstr "superflua argumento: %s" #: src/timeout.c:130 #, c-format msgid "warning: timer_settime" msgstr "averto: malsukcesis agordi horloĝtempon" #: src/timeout.c:135 #, c-format msgid "warning: timer_create" msgstr "averto: malsukcesis krei horloĝon" #: src/timeout.c:161 #, fuzzy, c-format #| msgid "warning: timer_settime" msgid "warning: setitimer" msgstr "averto: malsukcesis agordi horloĝtempon" #: src/timeout.c:231 #, fuzzy, c-format #| msgid "with FILE=%s, signal %s from command: %s" msgid "sending signal %s to command %s" msgstr "kun FILE=%s, signalo %s el komando %s" #: src/timeout.c:259 #, c-format msgid "" "Usage: %s [OPTION] DURATION COMMAND [ARG]...\n" " or: %s [OPTION]\n" msgstr "" "Uzmaniero: %s [OPCIO] DAŬRO KOMANDO [ARGUMENTO...]\n" " aŭ: %s [OPCIO]\n" #: src/timeout.c:263 msgid "Start COMMAND, and kill it if still running after DURATION.\n" msgstr "Startas KOMANDOn, kaj ĉesigas ĝin kiam ĝi ankoraŭ rulas post DAŬRO.\n" #: src/timeout.c:269 msgid "" " --preserve-status\n" " exit with the same status as COMMAND, even when the\n" " command times out\n" " --foreground\n" " when not running timeout directly from a shell prompt,\n" " allow COMMAND to read from the TTY and get TTY signals;\n" " in this mode, children of COMMAND will not be timed out\n" " -k, --kill-after=DURATION\n" " also send a KILL signal if COMMAND is still running\n" " this long after the initial signal was sent\n" " -s, --signal=SIGNAL\n" " specify the signal to be sent on timeout;\n" " SIGNAL may be a name like 'HUP' or a number;\n" " see 'kill -l' for a list of signals\n" msgstr "" #: src/timeout.c:284 msgid " -v, --verbose diagnose to stderr any signal sent upon timeout\n" msgstr "" #: src/timeout.c:290 msgid "" "\n" "DURATION is a floating point number with an optional suffix:\n" "'s' for seconds (the default), 'm' for minutes, 'h' for hours or 'd' for days.\n" "A duration of 0 disables the associated timeout.\n" msgstr "" #: src/timeout.c:295 msgid "" "\n" "Upon timeout, send the TERM signal to COMMAND, if no other SIGNAL specified.\n" "The TERM signal kills any process that does not block or catch that signal.\n" "It may be necessary to use the KILL signal, since this signal can't be caught.\n" msgstr "" #: src/timeout.c:301 msgid "" "\n" "EXIT status:\n" " 124 if COMMAND times out, and --preserve-status is not specified\n" " 125 if the timeout command itself fails\n" " 126 if COMMAND is found but cannot be invoked\n" " 127 if COMMAND cannot be found\n" " 137 if COMMAND (or timeout itself) is sent the KILL (9) signal (128+9)\n" " - the exit status of COMMAND otherwise\n" msgstr "" #: src/timeout.c:379 src/timeout.c:436 #, c-format msgid "warning: sigprocmask" msgstr "averto: malsukcesis malbloki signalon" #: src/timeout.c:458 #, c-format msgid "warning: disabling core dumps failed" msgstr "averto: malsukcesis malŝalti nekropsiojn" #: src/timeout.c:577 #, c-format msgid "error waiting for command" msgstr "eraro dum atendado je komando" #: src/timeout.c:588 #, c-format msgid "the monitored command dumped core" msgstr "" #: src/timeout.c:601 #, c-format msgid "unknown status from command (%d)" msgstr "nekonata rezulto (%d) el komando" #. This is a proper name. See the gettext manual, section Names. #: src/touch.c:44 msgid "Jim Kingdon" msgstr "Ĝim KINGDON (Jim Kingdon)" #. This is a proper name. See the gettext manual, section Names. #: src/touch.c:46 msgid "Randy Smith" msgstr "Rendi SMIF (Randy Smith)" #: src/touch.c:116 src/touch.c:314 #, c-format msgid "invalid date format %s" msgstr "nevalida dataranĝo: %s" #: src/touch.c:196 #, c-format msgid "cannot touch %s" msgstr "ne eblas tuŝi %s" #: src/touch.c:202 #, c-format msgid "setting times of %s" msgstr "agordiĝas tempoj de %s" #: src/touch.c:218 msgid "" "Update the access and modification times of each FILE to the current time.\n" "\n" "A FILE argument that does not exist is created empty, unless -c or -h\n" "is supplied.\n" "\n" "A FILE argument string of - is handled specially and causes touch to\n" "change the times of the file associated with standard output.\n" msgstr "" #: src/touch.c:230 msgid "" " -a change only the access time\n" " -c, --no-create do not create any files\n" " -d, --date=STRING parse STRING and use it instead of current time\n" " -f (ignored)\n" msgstr "" #: src/touch.c:236 msgid "" " -h, --no-dereference affect each symbolic link instead of any referenced\n" " file (useful only on systems that can change the\n" " timestamps of a symlink)\n" " -m change only the modification time\n" msgstr "" #: src/touch.c:242 msgid "" " -r, --reference=FILE use this file's times instead of current time\n" " -t STAMP use [[CC]YY]MMDDhhmm[.ss] instead of current time\n" " --time=WORD change the specified time:\n" " WORD is access, atime, or use: equivalent to -a\n" " WORD is modify or mtime: equivalent to -m\n" msgstr "" #: src/touch.c:251 msgid "" "\n" "Note that the -d and -t options accept different time-date formats.\n" msgstr "" #: src/touch.c:340 #, c-format msgid "cannot specify times from more than one source" msgstr "nekombineblas opcio '-t' kun '-d' aŭ '-r'" #: src/touch.c:414 #, c-format msgid "warning: 'touch %s' is obsolete; use 'touch -t %04ld%02d%02d%02d%02d.%02d'" msgstr "" "averto: 'touch %s' arkaikas;\n" "uzu 'touch -t %04ld%02d%02d%02d%02d.%02d'" #: src/tr.c:287 #, c-format msgid "Usage: %s [OPTION]... SET1 [SET2]\n" msgstr "Uzmaniero: %s [OPCIO...] ARO1 [ARO2]\n" #: src/tr.c:291 msgid "" "Translate, squeeze, and/or delete characters from standard input,\n" "writing to standard output.\n" "\n" " -c, -C, --complement use the complement of SET1\n" " -d, --delete delete characters in SET1, do not translate\n" " -s, --squeeze-repeats replace each sequence of a repeated character\n" " that is listed in the last specified SET,\n" " with a single occurrence of that character\n" " -t, --truncate-set1 first truncate SET1 to length of SET2\n" msgstr "" #: src/tr.c:304 msgid "" "\n" "SETs are specified as strings of characters. Most represent themselves.\n" "Interpreted sequences are:\n" "\n" " \\NNN character with octal value NNN (1 to 3 octal digits)\n" " \\\\ backslash\n" " \\a audible BEL\n" " \\b backspace\n" " \\f form feed\n" " \\n new line\n" " \\r return\n" " \\t horizontal tab\n" msgstr "" #: src/tr.c:318 msgid "" " \\v vertical tab\n" " CHAR1-CHAR2 all characters from CHAR1 to CHAR2 in ascending order\n" " [CHAR*] in SET2, copies of CHAR until length of SET1\n" " [CHAR*REPEAT] REPEAT copies of CHAR, REPEAT octal if starting with 0\n" " [:alnum:] all letters and digits\n" " [:alpha:] all letters\n" " [:blank:] all horizontal whitespace\n" " [:cntrl:] all control characters\n" " [:digit:] all digits\n" msgstr "" #: src/tr.c:329 msgid "" " [:graph:] all printable characters, not including space\n" " [:lower:] all lower case letters\n" " [:print:] all printable characters, including space\n" " [:punct:] all punctuation characters\n" " [:space:] all horizontal or vertical whitespace\n" " [:upper:] all upper case letters\n" " [:xdigit:] all hexadecimal digits\n" " [=CHAR=] all characters which are equivalent to CHAR\n" msgstr "" #: src/tr.c:339 msgid "" "\n" "Translation occurs if -d is not given and both SET1 and SET2 appear.\n" "-t may be used only when translating. SET2 is extended to length of\n" "SET1 by repeating its last character as necessary. Excess characters\n" "of SET2 are ignored. Only [:lower:] and [:upper:] are guaranteed to\n" "expand in ascending order; used in SET2 while translating, they may\n" "only be used in pairs to specify case conversion. -s uses the last\n" "specified SET, and occurs after translation or deletion.\n" msgstr "" #: src/tr.c:507 #, c-format msgid "" "warning: the ambiguous octal escape \\%c%c%c is being\n" "\tinterpreted as the 2-byte sequence \\0%c%c, %c" msgstr "" "averto: plursenca okuma eskapsigno \\%c%c%c\n" " kompreniĝas kiel du-bitoka sekvo: \\0%c%c, %c" #: src/tr.c:516 #, c-format msgid "warning: an unescaped backslash at end of string is not portable" msgstr "averto: necitata malsuprenstreko ĉe la fino de signoĉeno ne transporteblas" #: src/tr.c:666 #, c-format msgid "range-endpoints of '%s-%s' are in reverse collating sequence order" msgstr "la gamekstremoj en '%s-%s' estas en inversa ordo" #: src/tr.c:812 #, c-format msgid "invalid repeat count %s in [c*n] construct" msgstr "nevalida ripeta nombro %s en konstruo «[s*n]»" #: src/tr.c:888 #, c-format msgid "missing character class name '[::]'" msgstr "mankas signoklasa nomo en '[::]'" #: src/tr.c:891 #, c-format msgid "missing equivalence class character '[==]'" msgstr "mankas ekvivalentklasa signo en '[::]'" #: src/tr.c:906 #, c-format msgid "invalid character class %s" msgstr "nevalida signoklaso %s" #: src/tr.c:925 #, c-format msgid "%s: equivalence class operand must be a single character" msgstr "%s: ekvivalentklasa argumento nepras esti ununura signo" #: src/tr.c:1205 msgid "misaligned [:upper:] and/or [:lower:] construct" msgstr "misorda konstruo kun '[:upper:]' kajaŭ '[:lower:]'" #: src/tr.c:1309 msgid "too many characters in set" msgstr "tro multaj signoj en aro" #: src/tr.c:1393 msgid "" "when translating with string1 longer than string2,\n" "the latter string must not end with a character class" msgstr "" "kiam dum traduko ARO1 pli longas ol ARO2,\n" "la lasta ĉeno ne rajtas fini per signoklaso" #: src/tr.c:1449 msgid "the [c*] repeat construct may not appear in string1" msgstr "ripeta konstruo «[s*]» ne permesatas en ARO1" #: src/tr.c:1459 msgid "only one [c*] repeat construct may appear in string2" msgstr "nur unu ripeta konstruo «[s*]» permesatas en ARO2" #: src/tr.c:1467 msgid "[=c=] expressions may not appear in string2 when translating" msgstr "dum traduko esprimoj «[=s=]» ne permesatas en ARO2" #: src/tr.c:1474 msgid "" "when translating, the only character classes that may appear in\n" "string2 are 'upper' and 'lower'" msgstr "dum traduko nur la signoklasoj 'upper' kaj 'lower' permesatas en ARO2" #: src/tr.c:1489 msgid "when not truncating set1, string2 must be non-empty" msgstr "kiam ARO1 ne trunkiĝas, ARO2 devas esti nevaka" #: src/tr.c:1498 msgid "" "when translating with complemented character classes,\n" "string2 must map all characters in the domain to one" msgstr "" "dum traduko kun komplementaj signoklasoj,\n" "ARO2 devas bildigi ĉiujn signojn en la domajno al unu" #: src/tr.c:1507 msgid "the [c*] construct may appear in string2 only when translating" msgstr "ripeta konstruo «[s*]» permesatas en ARO2 nur dum traduko" #: src/tr.c:1759 msgid "Two strings must be given when both deleting and squeezing repeats." msgstr "Endas indiki du signoĉenojn kiam kaj forigiĝas kaj kunpremiĝas ripetoj." #: src/tr.c:1761 msgid "Two strings must be given when translating." msgstr "Endas indiki du signoĉenojn kiam tradukiĝas." #: src/tr.c:1771 msgid "Only one string may be given when deleting without squeezing repeats." msgstr "Nur unu signoĉeno permesatas kiam forigiĝas sen kunpremi ripetojn." #: src/true.c:38 #, c-format msgid "" "Usage: %s [ignored command line arguments]\n" " or: %s OPTION\n" msgstr "" "Uzmaniero: %s [ignorataj argumentoj]\n" " aŭ: %s OPCIO\n" #: src/true.c:45 msgid "Exit with a status code indicating success." msgstr "Eliras kun rezultkodo kiu indikas sukceson." #: src/true.c:46 msgid "Exit with a status code indicating failure." msgstr "Eliras kun rezultkodo kiu indikas malsukceson." #: src/truncate.c:70 #, c-format msgid "Usage: %s OPTION... FILE...\n" msgstr "Uzmaniero: %s OPCIO... DOSIERO...\n" # XXX -- Please add period. #: src/truncate.c:71 #, fuzzy #| msgid "" #| "Shrink or extend the size of each FILE to the specified size\n" #| "\n" #| "A FILE argument that does not exist is created.\n" #| "\n" #| "If a FILE is larger than the specified size, the extra data is lost.\n" #| "If a FILE is shorter, it is extended and the extended part (hole)\n" #| "reads as zero bytes.\n" msgid "" "Shrink or extend the size of each FILE to the specified size\n" "\n" "A FILE argument that does not exist is created.\n" "\n" "If a FILE is larger than the specified size, the extra data is lost.\n" "If a FILE is shorter, it is extended and the sparse extended part (hole)\n" "reads as zero bytes.\n" msgstr "" "Ŝrumpigas aŭ etendas ĉiun indikatan DOSIEROn al la indikata grando.\n" "\n" "Se DOSIERO estas pli longa ol la indikata grando, la pluaj datumoj perdiĝos.\n" "Se DOSIERO estas malpli longa, ĝi etendiĝas, kaj la parto etendata (truo)\n" "legiĝas kiel nulbajtoj. Se iu argumenta DOSIERO ne ekzistas, ĝi kreiĝas.\n" #: src/truncate.c:83 msgid " -c, --no-create do not create any files\n" msgstr " -c, --no-create ne krei iun ajn dosieron\n" #: src/truncate.c:86 msgid " -o, --io-blocks treat SIZE as number of IO blocks instead of bytes\n" msgstr "" " -o, --io-blocks trakti GRANDOn kiel nombro de en-eligaj blokoj\n" " anstataŭ kiel bajtoj\n" #: src/truncate.c:89 msgid "" " -r, --reference=RFILE base size on RFILE\n" " -s, --size=SIZE set or adjust the file size by SIZE bytes\n" msgstr "" " -r, --reference=REFDOS uzi la grandon de ĉi tiu referenca dosiero\n" " -s. --size=GRANDO agordi aŭ adapti la dosiergrandon laŭ ĉi tiu GRANDO\n" #: src/truncate.c:95 msgid "" "\n" "SIZE may also be prefixed by one of the following modifying characters:\n" "'+' extend by, '-' reduce by, '<' at most, '>' at least,\n" "'/' round down to multiple of, '%' round up to multiple of.\n" msgstr "" "\n" "Eblas prefiksi GRANDOn per unu el la sekvaj modifaj signoj:\n" "'+' etendi kun, '-' ŝrumpigi kun, '<' maksimume, '>' minimume,\n" "'/' subrondigi al multoblo de, '%' superrondigi al multoblo de.\n" #: src/truncate.c:124 #, fuzzy, c-format #| msgid "overflow in % * % byte blocks for file %s" msgid "overflow in % * % byte blocks for file %s" msgstr "troo en % * %-bajtaj blokoj por dosiero %s" #: src/truncate.c:145 #, c-format msgid "%s has unusable, apparently negative size" msgstr "%s havas neuzeblan, ŝajne negativan grandon" #: src/truncate.c:155 src/truncate.c:348 #, c-format msgid "cannot get the size of %s" msgstr "ne eblas eltrovi grandon de %s" #: src/truncate.c:179 #, c-format msgid "overflow extending size of file %s" msgstr "troo dum etendo de grando de dosiero %s" #: src/truncate.c:193 #, c-format msgid "failed to truncate %s at % bytes" msgstr "malsukcesis trunki %s al % bajtoj" #: src/truncate.c:266 #, c-format msgid "multiple relative modifiers specified" msgstr "pluraj relativaj modifiloj indikatas" #: src/truncate.c:275 msgid "Invalid number" msgstr "nevalida numero" #: src/truncate.c:297 #, c-format msgid "you must specify either %s or %s" msgstr "nepras indiki aŭ %s aŭ %s" #: src/truncate.c:304 #, c-format msgid "you must specify a relative %s with %s" msgstr "nepras indiki relativan %s kun %s" #: src/truncate.c:311 #, c-format msgid "%s was specified but %s was not" msgstr "indikatas %s sen %s" #: src/truncate.c:368 #, c-format msgid "cannot open %s for writing" msgstr "malsukcesis malfermi %s por skribi" #. This is a proper name. See the gettext manual, section Names. #: src/tsort.c:40 msgid "Mark Kettenis" msgstr "Mark KETENIS (Mark Kettenis)" #: src/tsort.c:82 #, fuzzy, c-format msgid "" "Usage: %s [OPTION] [FILE]\n" "Write totally ordered list consistent with the partial ordering in FILE.\n" msgstr "" "Uzmaniero: %s [OPCIO] [DOSIERO]\n" "\n" "Eligas tute ordigitan liston kiu koheras kun la parta ordo en DOSIERO.\n" "\n" "Sen DOSIERO, aŭ kiam DOSIERO estas «-», ĉefenigujo legiĝas.\n" #: src/tsort.c:89 src/uptime.c:213 #, c-format msgid "\n" msgstr "\n" #: src/tsort.c:476 #, c-format msgid "%s: input contains an odd number of tokens" msgstr "%s: enigo enhavas malparecan nombron de simboloj" #: src/tsort.c:522 #, c-format msgid "%s: input contains a loop:" msgstr "%s: enigo enhavas iteracion:" #: src/tty.c:66 msgid "" "Print the file name of the terminal connected to standard input.\n" "\n" " -s, --silent, --quiet print nothing, only return an exit status\n" msgstr "" "Montras la dosiernomon de la terminalo kiu estas konektata al ĉefenigujo.\n" "\n" " -s, --silent, --quiet eligi nenion, nur produkti elirstaton\n" #: src/tty.c:127 msgid "not a tty" msgstr "ne estas 'tty'" #: src/uname.c:125 msgid "" "Print certain system information. With no OPTION, same as -s.\n" "\n" " -a, --all print all information, in the following order,\n" " except omit -p and -i if unknown:\n" " -s, --kernel-name print the kernel name\n" " -n, --nodename print the network node hostname\n" " -r, --kernel-release print the kernel release\n" msgstr "" "Montras certan informon pri la komputilo. Sen iu OPCIO, opcio «-s» kompreniĝas.\n" "\n" " -a, --all montri ĉiujn informojn en la ordo de la sekvantaj\n" " opcioj, forlasante «-p» kaj «-i» se ili nekonatas\n" " -s, --kernel-name montri la nomon de la kerno\n" " -n, --nodename montri la retnomon de la komputilo\n" " -r, --kernel-release montri la eldonon de la kerno\n" #: src/uname.c:134 #, fuzzy msgid "" " -v, --kernel-version print the kernel version\n" " -m, --machine print the machine hardware name\n" " -p, --processor print the processor type (non-portable)\n" " -i, --hardware-platform print the hardware platform (non-portable)\n" " -o, --operating-system print the operating system\n" msgstr "" " -v, --kernel-version montri la version de la kerno\n" " -m, --machine montri la klason de la procesoro\n" " -p, --processor montri la tipon de la procesoro aŭ «unknown»\n" " -i, --hardware-platform montri la klason de la komputilo aŭ «unknown»\n" " -o, --operating-system montri la nomon de la mastruma sistemo\n" #: src/uname.c:144 msgid "" "Print machine architecture.\n" "\n" msgstr "" "Montras la arkitekturon de la komputilo.\n" "\n" #: src/uname.c:287 msgid "cannot get system name" msgstr "malsukcesis eltrovi la nomon de la sistemo" #: src/unexpand.c:81 #, fuzzy msgid "Convert blanks in each FILE to tabs, writing to standard output.\n" msgstr "" "Konvertas spacetojn en ĉiu DOSIERO al taboj, skribante al ĉefeligujo.\n" "Sen DOSIERO, aŭ kiam DOSIERO estas «-», ĉefenigujo legiĝas.\n" "\n" #: src/unexpand.c:88 #, fuzzy #| msgid "" #| " -a, --all convert all blanks, instead of just initial blanks\n" #| " --first-only convert only leading sequences of blanks (overrides -a)\n" #| " -t, --tabs=N have tabs N characters apart instead of 8 (enables -a)\n" #| " -t, --tabs=LIST use comma separated LIST of tab positions (enables -a)\n" msgid "" " -a, --all convert all blanks, instead of just initial blanks\n" " --first-only convert only leading sequences of blanks (overrides -a)\n" " -t, --tabs=N have tabs N characters apart instead of 8 (enables -a)\n" msgstr "" " -a, --all konverti ĉiujn blankspacojn anstataŭ nur la komencajn\n" " --first-only konverti nur komencan sinsekvon de blankspacoj (nuligas '-a')\n" " -t, --tabs=NMBRO meti tabojn dise je NMBRO anstataŭ 8 pozicioj (ebligas '-a')\n" " -t, --tabs=LISTO uzi komadisigatan LISTOn de tabpozicioj (ebligas '-a')\n" #: src/unexpand.c:305 msgid "tab stop value is too large" msgstr "taba pozicio estas tro granda" #: src/uniq.c:166 #, c-format msgid "Usage: %s [OPTION]... [INPUT [OUTPUT]]\n" msgstr "Uzmaniero: %s [OPCIO...] [ENIGDOSIERO [ELIGDOSIERO]]\n" #: src/uniq.c:170 msgid "" "Filter adjacent matching lines from INPUT (or standard input),\n" "writing to OUTPUT (or standard output).\n" "\n" "With no options, matching lines are merged to the first occurrence.\n" msgstr "" "Filtras apudajn kongruajn linioj elde ENIGDOSIERO (aŭ ĉefenigujo),\n" "kaj skribas la restaĵon al ELIGDOSIERO (aŭ ĉefeligujo).\n" "\n" "Sen opcioj, kongruaj linioj estas kunfandataj al la unua okazo.\n" "\n" #: src/uniq.c:179 msgid "" " -c, --count prefix lines by the number of occurrences\n" " -d, --repeated only print duplicate lines, one for each group\n" msgstr "" " -c, --count prefiksi liniojn per la nombro de okazoj\n" " -d, --repeated montri nur la ripetitajn liniojn, unu por ĉiu grupo\n" #: src/uniq.c:183 #, fuzzy msgid "" " -D print all duplicate lines\n" " --all-repeated[=METHOD] like -D, but allow separating groups\n" " with an empty line;\n" " METHOD={none(default),prepend,separate}\n" msgstr "" " -D, --all-repeated[=DISIGMETODO] montri ĉiujn ripetitajn liniojn;\n" " DISIGMETODO povas esti 'none' (defaŭlte), 'prepend',\n" " aŭ 'separate'; disigo fariĝas per vakaj linioj\n" #: src/uniq.c:189 msgid " -f, --skip-fields=N avoid comparing the first N fields\n" msgstr " -f, --skip-fields=N eviti kompari la unuajn N kampojn\n" #: src/uniq.c:192 #, fuzzy msgid "" " --group[=METHOD] show all items, separating groups with an empty line;\n" " METHOD={separate(default),prepend,append,both}\n" msgstr "" " --group[=DISIGMETODO] montri ĉiujn erojn, disigante grupojn per vaklinio;\n" " DISIGMETODO povas esti 'separate' (disige, defaŭlte),\n" " 'prepend' (antaŭmeto), 'append' (postmeto),\n" " aŭ 'both' (ambaŭ)\n" #: src/uniq.c:196 msgid "" " -i, --ignore-case ignore differences in case when comparing\n" " -s, --skip-chars=N avoid comparing the first N characters\n" " -u, --unique only print unique lines\n" msgstr "" " -i, --ignore-case ignori usklecajn malsamecojn je komparo\n" " -s, --skip-chars=N eviti kompari la unuajn N signojn\n" " -u, --unique montri nur unikajn liniojn\n" #: src/uniq.c:204 msgid " -w, --check-chars=N compare no more than N characters in lines\n" msgstr " -w, --check-chars=N kompari en ĉiu linio ne pli ol N signoj\n" #: src/uniq.c:209 msgid "" "\n" "A field is a run of blanks (usually spaces and/or TABs), then non-blank\n" "characters. Fields are skipped before chars.\n" msgstr "" "\n" "Kampo estas vico de blankspacoj (kutime spacetoj kaj/aŭ taboj) kaj poste\n" "neblankaj signoj. Kampoj transsaltiĝas antaŭ signoj.\n" #: src/uniq.c:214 #, fuzzy #| msgid "" #| "\n" #| "Note: 'uniq' does not detect repeated lines unless they are adjacent.\n" #| "You may want to sort the input first, or use 'sort -u' without 'uniq'.\n" #| "Also, comparisons honor the rules specified by 'LC_COLLATE'.\n" msgid "" "\n" "Note: 'uniq' does not detect repeated lines unless they are adjacent.\n" "You may want to sort the input first, or use 'sort -u' without 'uniq'.\n" msgstr "" "\n" "Notu: 'uniq' nur rimarkas ripetitajn liniojn kiam ili estas apudaj.\n" "Vi eble volas unue ordigi la enigon, aŭ uzi 'sort -u' sen 'uniq'.\n" "Ankaŭ, komparoj honoras la regulojn indikatajn de 'LC_COLLATE'.\n" #: src/uniq.c:425 msgid "too many repeated lines" msgstr "tro da ripetitaj linioj" #: src/uniq.c:600 msgid "invalid number of fields to skip" msgstr "nevalida nombro de saltendaj kampoj" #: src/uniq.c:609 msgid "invalid number of bytes to skip" msgstr "nevalida nombro de saltendaj bajtoj" #: src/uniq.c:619 msgid "invalid number of bytes to compare" msgstr "nevalida nombro de komparendaj bajtoj" #: src/uniq.c:641 #, c-format msgid "--group is mutually exclusive with -c/-d/-D/-u" msgstr "nekombineblas opcio «--group» kun «-c», «-d», «-D», kaj «-u»" #: src/uniq.c:648 #, c-format msgid "grouping and printing repeat counts is meaningless" msgstr "sensencas kaj grupigi kaj montri ripetnombrojn" #: src/uniq.c:655 #, c-format msgid "printing all duplicated lines and repeat counts is meaningless" msgstr "sensencas montri kaj ĉiujn ripetitajn liniojn kaj la ripetnombrojn" #: src/unlink.c:45 #, c-format msgid "" "Usage: %s FILE\n" " or: %s OPTION\n" msgstr "" "Uzmaniero: %s DOSIERO\n" " aŭ: %s OPCIO\n" #: src/unlink.c:48 msgid "" "Call the unlink function to remove the specified FILE.\n" "\n" msgstr "" "Forigas la indikatan DOSIEROn per alvoko al funkcio 'unlink()'.\n" "\n" #: src/uptime.c:126 msgid "couldn't get boot time" msgstr "ne eblas eltrovi la tempon de praŝargo" #. TRANSLATORS: This prints the current clock time. #: src/uptime.c:137 #, fuzzy #| msgid " %H:%M%P " msgid " %H:%M:%S " msgstr " %H:%M " #: src/uptime.c:139 #, c-format msgid " ??:???? " msgstr " ??:?? " #: src/uptime.c:141 #, c-format msgid "up ???? days ??:??, " msgstr "rulas ??? tagoj ??:??, " #: src/uptime.c:145 #, c-format msgid "up %ld day %2d:%02d, " msgid_plural "up %ld days %2d:%02d, " msgstr[0] "rulas %ld tago %2d:%02d, " msgstr[1] "rulas %ld tagoj %2d:%02d, " #: src/uptime.c:150 #, c-format msgid "up %2d:%02d, " msgstr "rulas %2d:%02d, " #: src/uptime.c:152 #, c-format msgid "%lu user" msgid_plural "%lu users" msgstr[0] "%lu uzanto" msgstr[1] "%lu uzantoj" #: src/uptime.c:162 #, c-format msgid ", load average: %.2f" msgstr ", meznombra ŝarĝo: %.2f" #: src/uptime.c:200 #, c-format msgid "" "Print the current time, the length of time the system has been up,\n" "the number of users on the system, and the average number of jobs\n" "in the run queue over the last 1, 5 and 15 minutes." msgstr "" "Montras la nunan tempon, la daŭron kiu la sistemo jam rulas, la nombro\n" "de uzantoj, kaj la meznombro de taskoj en la rulvico dum la lastaj 1, 5\n" "kaj 15 minutoj." #: src/uptime.c:209 #, c-format msgid "" " Processes in\n" "an uninterruptible sleep state also contribute to the load average.\n" msgstr "" " Procezoj en ne-interrompebla dormstato ankaŭ kontribuas\n" "al la meznombra ŝarĝo.\n" #: src/uptime.c:215 #, c-format msgid "" "If FILE is not specified, use %s. %s as FILE is common.\n" "\n" msgstr "" "Se DOSIERO ne indikatas, %s uzatas. Kiel DOSIERO kutimas %s.\n" "\n" #: src/users.c:106 #, c-format msgid "" "Output who is currently logged in according to FILE.\n" "If FILE is not specified, use %s. %s as FILE is common.\n" "\n" msgstr "" "Montras kiuj estas aktuale ensalutitaj laŭ DOSIERO.\n" "Se DOSIERO ne indikatas, %s uzatas. Kiel DOSIERO kutimas %s.\n" "\n" #: src/wc.c:172 msgid "avx2 support not detected" msgstr "" #: src/wc.c:178 msgid "using avx2 hardware support" msgstr "" #: src/wc.c:196 msgid "" "Print newline, word, and byte counts for each FILE, and a total line if\n" "more than one FILE is specified. A word is a non-zero-length sequence of\n" "printable characters delimited by white space.\n" msgstr "" #: src/wc.c:204 #, fuzzy msgid "" "\n" "The options below may be used to select which counts are printed, always in\n" "the following order: newline, word, character, byte, maximum line length.\n" " -c, --bytes print the byte counts\n" " -m, --chars print the character counts\n" " -l, --lines print the newline counts\n" msgstr "" "Montras la nombrojn de novlinioj, vortoj kaj bajtoj por ĉiu DOSIERO,\n" "kaj plue linion de totaloj se pli ol unu DOSIERO indikatas.\n" "Sen DOSIERO, aŭ kiam DOSIERO estas «-», ĉefenigujo legiĝas.\n" "Vorto estas nenullonga vico de signoj limigita de blankspaco.\n" "\n" "La subaj opcioj uzeblas por elekti kiuj nombroj montriĝos, sed ĉiam en la\n" "sekvanta ordo: novlinioj, vortoj, signoj, bajtoj, kaj maksimuma linilongo.\n" "\n" " -c, --bytes montri la nombron de bajtoj\n" " -m, --chars montri la nombron de signoj\n" " -l, --lines montri la nombron de novlinioj\n" #: src/wc.c:212 #, fuzzy msgid "" " --files0-from=F read input from the files specified by\n" " NUL-terminated names in file F;\n" " If F is - then read names from standard input\n" " -L, --max-line-length print the maximum display width\n" " -w, --words print the word counts\n" msgstr "" " --files0-from=DOS legi la enigon el la dosieroj kiuj indikatas en la\n" " dosiero DOS per NUL-finitaj nomoj; se DOS estas «-»,\n" " la nomoj legiĝas el ĉefenigujo\n" " -L, --max-line-length montri la longon de la plej longa linio\n" " -w, --words montri la nombron de vortoj\n" # Kiam uzanto jam tre longe ne faras ion ajn. #: src/who.c:213 msgid " old " msgstr "longe" #: src/who.c:443 msgid "system boot" msgstr "(starto)" #: src/who.c:451 src/who.c:453 msgid "id=" msgstr "id=" #: src/who.c:466 src/who.c:471 msgid "term=" msgstr "term=" #: src/who.c:468 src/who.c:472 msgid "exit=" msgstr "eliro=" #: src/who.c:489 msgid "LOGIN" msgstr "LOGIN" #: src/who.c:509 msgid "clock change" msgstr "horloĝŝanĝo" #: src/who.c:521 src/who.c:522 msgid "run-level" msgstr "rulnivelo" #: src/who.c:525 src/who.c:526 msgid "last=" msgstr "antaŭa=" #: src/who.c:557 #, c-format msgid "" "\n" "# users=%lu\n" msgstr "" "\n" "nombro da uzantoj=%lu\n" #: src/who.c:563 msgid "NAME" msgstr "Nomo" #: src/who.c:563 msgid "LINE" msgstr "Terminalo" #: src/who.c:563 msgid "TIME" msgstr "Ensalutis" #: src/who.c:563 msgid "IDLE" msgstr "Vakas" #: src/who.c:564 msgid "PID" msgstr "PID" #: src/who.c:564 msgid "COMMENT" msgstr "Komento" #: src/who.c:564 msgid "EXIT" msgstr "Eliro" #: src/who.c:644 #, c-format msgid "Usage: %s [OPTION]... [ FILE | ARG1 ARG2 ]\n" msgstr "Uzmaniero: %s [OPCIO...] [ DOSIERO | ARGUMENTO1 ARGUMENTO2 ]\n" #: src/who.c:645 msgid "Print information about users who are currently logged in.\n" msgstr "Montras informon pri la aktuale ensalutitaj uzantoj.\n" #: src/who.c:648 msgid "" "\n" " -a, --all same as -b -d --login -p -r -t -T -u\n" " -b, --boot time of last system boot\n" " -d, --dead print dead processes\n" " -H, --heading print line of column headings\n" msgstr "" "\n" " -a, --all egalas al «-b -d --login -p -r -t -T -u»\n" " -b, --boot montri tempon de lasta sistemstarto\n" " -d, --dead montri ankaŭ mortajn procezojn\n" " -H, --heading montri linion de kolumno-kapoj\n" #: src/who.c:655 msgid " -l, --login print system login processes\n" msgstr " -l, --login montri ensalutajn procezojn de la sistemo\n" #: src/who.c:658 msgid "" " --lookup attempt to canonicalize hostnames via DNS\n" " -m only hostname and user associated with stdin\n" " -p, --process print active processes spawned by init\n" msgstr "" " --lookup provi normaligi gastnomojn per DNS\n" " -m montri nur gastnomon kaj uzanton kiu uzas ĉefenigujon\n" " -p, --process montri aktivajn procezojn kiuj kreiĝis far 'init'\n" #: src/who.c:663 msgid "" " -q, --count all login names and number of users logged on\n" " -r, --runlevel print current runlevel\n" " -s, --short print only name, line, and time (default)\n" " -t, --time print last system clock change\n" msgstr "" " -q, --count montri nur nomojn kaj nombron de ensalutitaj uzantoj\n" " -r, --runlevel montri nunan rulnivelon\n" " -s, --short montri nur nomon, terminalon kaj tempon (defaŭlte)\n" " -t, --time montri la lastan sistemhorloĝan ŝanĝon\n" #: src/who.c:669 msgid "" " -T, -w, --mesg add user's message status as +, - or ?\n" " -u, --users list users logged in\n" " --message same as -T\n" " --writable same as -T\n" msgstr "" " -T, -w, --mesg aldoni mesaĝan staton de la uzanto kiel «+», «-» aŭ «?»\n" " -u, --users montri ensalutitajn uzantojn\n" " --message egalas al «-T»\n" " --writable egalas al «-T»\n" #: src/who.c:677 #, c-format msgid "" "\n" "If FILE is not specified, use %s. %s as FILE is common.\n" "If ARG1 ARG2 given, -m presumed: 'am i' or 'mom likes' are usual.\n" msgstr "" "\n" "Se DOSIERO ne indikatas, %s uzatas. Kutimas %s kiel DOSIERO.\n" "Kiam du ARGUMENTOj indikatas («estas mi» eblas), opcio «-m» kompreniĝas.\n" #: src/whoami.c:45 msgid "" "Print the user name associated with the current effective user ID.\n" "Same as id -un.\n" "\n" msgstr "" "Montras la uzantnomon de la aktuala uzanta ID-o.\n" "Samas al 'id -un'.\n" "\n" #: src/whoami.c:86 #, c-format msgid "cannot find name for user ID %lu" msgstr "ne eblas eltrovi nomon por uzantnumero %lu" #: src/yes.c:41 #, c-format msgid "" "Usage: %s [STRING]...\n" " or: %s OPTION\n" msgstr "" "Uzmaniero: %s [ĈENO...]\n" " aŭ: %s OPCIO\n" #: src/yes.c:47 msgid "" "Repeatedly output a line with all specified STRING(s), or 'y'.\n" "\n" msgstr "" "Daŭre eligas linion kun (ĉiuj) indikata(j) ĈENO(j), aŭ 'y'.\n" "\n" #~ msgid "%s: option '--%s' doesn't allow an argument\n" #~ msgstr "%s: opcio «--%s» ne toleras argumenton\n" #~ msgid "%s: unrecognized option '--%s'\n" #~ msgstr "%s: nekonata opcio «--%s»\n" #~ msgid "%s: option '-W %s' is ambiguous\n" #~ msgstr "%s: opcio «-W %s» estas plursenca\n" #~ msgid "%s: option '-W %s' doesn't allow an argument\n" #~ msgstr "%s: opcio «-W %s» ne toleras argumenton\n" #~ msgid "%s: option '-W %s' requires an argument\n" #~ msgstr "%s: opcio «-W %s» bezonas argumenton\n" #~ msgid "%s home page: \n" #~ msgstr "Hejmpaĝo de «%s»: \n" #~ msgid "%s: file too long" #~ msgstr "%s: dosiero tro longas" #~ msgid "" #~ "Usage: %s [FILE]...\n" #~ " or: %s [OPTION]\n" #~ msgstr "" #~ "Uzmaniero: %s [DOSIERO...]\n" #~ " aŭ: %s [OPCIO]\n" #~ msgid "" #~ "Print CRC checksum and byte counts of each FILE.\n" #~ "\n" #~ msgstr "" #~ "Montras la CRC-kontrolsumon kaj bajtnombrojn de ĉiu DOSIERO.\n" #~ "\n" #~ msgid "%s: failed to get extents info" #~ msgstr "%s: malsukcesis eltrovi informon pri 'extents'" #~ msgid "Infinity B" #~ msgstr "senfino" #~ msgid "syntax error" #~ msgstr "sintakseraro" #, fuzzy #~ msgid "" #~ "\n" #~ "NUM may have a multiplier suffix:\n" #~ "b 512, kB 1000, K 1024, MB 1000*1000, M 1024*1024,\n" #~ "GB 1000*1000*1000, G 1024*1024*1024, and so on for T, P, E, Z, Y.\n" #~ msgstr "" #~ "\n" #~ "NOMBRO povas havi obligilan sufikson:\n" #~ "b = 512, kB = 1000, K = 1024, MB = 1000*1000, M = 1024*1024,\n" #~ "GB = 1000*1000*1000, G = 1024*1024*1024, ktp por T, P, E, Z, Y.\n" #~ msgid "Usage: %s [OPTION]... [USER]\n" #~ msgstr "Uzmaniero: %s [OPCIO...] [UZANTO]\n" #~ msgid "" #~ "Print the name of the current user.\n" #~ "\n" #~ msgstr "" #~ "Eligas nomon de aktuala uzanto.\n" #~ "\n" #~ msgid "failed to set the copy of stderr to close on exec" #~ msgstr "malsukcesis agordi kopion de ĉeferar-eligujo fermiĝi je rulo" #, fuzzy #~ msgid "failed to set locale; " #~ msgstr "malsukcesis agordi novan rolon %s" #, fuzzy #~ msgid "Print checksum and block counts for each FILE.\n" #~ msgstr "" #~ "Montras la CRC-kontrolsumon kaj bajtnombrojn de ĉiu DOSIERO.\n" #~ "\n" #~ msgid "error monitoring inotify event" #~ msgstr "eraro dum rigardado de 'inotify'-evento" #~ msgid "overflow rounding up size of file %s" #~ msgstr "troo dum rondigo de grando de dosiero %s" #~ msgid "stdin" #~ msgstr "ĉefenigujo" #~ msgid "stdout" #~ msgstr "ĉefeligujo" #~ msgid "stderr" #~ msgstr "ĉeferar-eligujo" #~ msgid "unknown stream" #~ msgstr "nekonata fluaĵo" #~ msgid "failed to reopen %s with mode %s" #~ msgstr "malsukcesis remalfermi %s kun moduso %s" #~ msgid "failed to %s supplemental groups" #~ msgstr "malsukcesis «%s» la pluajn grupojn" #~ msgid "empty %s not allowed" #~ msgstr "vaka %s ne permesatas" #~ msgid "%s: invalid number" #~ msgstr "%s: nevalida numero" #~ msgid ", %g s, %s/s\n" #~ msgstr ", %g s, %s/s\n" #~ msgid "%s: %s is so large that it is not representable" #~ msgstr "%s: %s estas tiel granda ke ĝi ne prezentiĝeblas" #~ msgid "number of lines" #~ msgstr "nombro da linioj" #~ msgid "number of bytes" #~ msgstr "nombro da bajtoj" #~ msgid "error initializing month strings" #~ msgstr "eraro dum estigo de monataj signoĉenoj" #~ msgid "%s: invalid number to ignore" #~ msgstr "%s: nevalida ignorenda nombro" #~ msgid "input line is too short, no numbers found to convert in field %ld" #~ msgstr "eniga linio tro mallongas; ne troviĝis konvertendaj nombroj en kampo %ld" #~ msgid "" #~ "\n" #~ "With no FILE, or when FILE is -, read standard input. Default is '-F /'.\n" #~ msgstr "" #~ "\n" #~ "Sen DOSIERO, aŭ kiam DOSIERO estas «-», ĉefenigujo legiĝas.\n" #~ "Defaŭlte uziĝas opcio «-F /».\n" #~ msgid "%s: invalid number of bytes" #~ msgstr "nevalida nombro da bajtoj: %s" #~ msgid "%s: invalid number of lines" #~ msgstr "nevalida nombro da linioj: %s" #~ msgid "" #~ "Force changed blocks to disk, update the super block.\n" #~ "\n" #~ msgstr "" #~ "Devigas skribon de ŝanĝitaj blokoj al disko, kaj ĝisdatigas la ĉefblokon.\n" #~ "\n" #~ msgid "ignoring all arguments" #~ msgstr "ignoriĝas ĉiuj argumentoj" #~ msgid "For complete documentation, run: info coreutils '%s invocation'\n" #~ msgstr "Por kompleta dokumentado rulu: info coreutils '%s invocation'\n" #~ msgid "%s has been replaced with a symbolic link. giving up on this name" #~ msgstr "%s anstataŭiĝis per simbola ligo; rezignatas pri ĉi tiu nomo" #~ msgid "%s has been replaced with a remote file. giving up on this name" #~ msgstr "%s anstataŭiĝis per fora dosiero; rezignatas pri ĉi tiu nomo" #~ msgid "number in %s is too large" #~ msgstr "nombro en %s tro grandas" #~ msgid "%s: invalid number of seconds" #~ msgstr "%s: nevalida nombro da sekundoj" #~ msgid "%s: cannot find name for user ID %lu\n" #~ msgstr "%s: ne eblas eltrovi nomon por uzanta ID-o %lu\n" #~ msgid "cannot create pipe" #~ msgstr "ne eblas krei dukton" #~ msgid "%s subprocess failed" #~ msgstr "subprocezo %s malsukcesis" #~ msgid "_open_osfhandle failed" #~ msgstr "'_open_osfhandle()' malsukcesis " #~ msgid "cannot restore fd %d: dup2 failed" #~ msgstr "ne eblas restaŭri dosiernumeron %d: 'dup2()' malsukcesis" #~ msgid "%s subprocess" #~ msgstr "subprocezo %s" #~ msgid "%s subprocess got fatal signal %d" #~ msgstr "subprocezo %s ricevis pereigan signalon %d" #~ msgid "failed to set additional groups" #~ msgstr "malsukcesis agordi la pluajn grupojn" #~ msgid "mount point %s already traversed" #~ msgstr "muntloko %s jam traktiĝis" #~ msgid "%s: cannot lseek back to original position" #~ msgstr "%s: ne eblas fari 'lseek' reen al unua pozicio" #~ msgid "%s: failed to reset file pointer" #~ msgstr "%s: malsukcesis reagordi dosierpozician indikilon" #~ msgid "cannot reposition file pointer for %s" #~ msgstr "ne eblas ŝanĝi dosierpozician indikilon pri %s" #~ msgid "" #~ " -Z, --context[=CTX] set the SELinux security context of each NAME to\n" #~ " default type, or CTX if specified\n" #~ msgstr "" #~ " -Z, --context[=KUNTEKSTO] agordi sekurecan kuntekston de ĉiu NOMO al\n" #~ " defaŭlta tipo, aŭ al KUNTEKSTO se ĝi indikatas\n" #~ msgid "" #~ " -Z, --context[=CTX] set the SELinux security context of NAME to\n" #~ " default type, or to CTX if specified\n" #~ msgstr "" #~ " -Z, --context[=KUNTEKSTO] agordi sekurecan kuntekston de NOMO al\n" #~ " defaŭlta tipo, aŭ al KUNTEKSTO se ĝi indikatas\n" #~ msgid "out of memory (requested %zu bytes)" #~ msgstr "mankas sufiĉa memoro (%zu bajtoj petiĝis)" #~ msgid "--padding cannot be combined with --format" #~ msgstr "nekombineblas opcioj «--padding» kaj «--format»" #~ msgid "" #~ "Usage: %s [SHORT-OPTION]... USER COMMAND [ARGUMENT]...\n" #~ " or: %s LONG-OPTION\n" #~ msgstr "" #~ "Uzmaniero: %s [MALLONGA_OPCIO...] UZANTO KOMANDO [ARGUMENTO...]\n" #~ " aŭ: %s LONGA_OPCIO\n" #~ msgid "unknown user-ID: %s" #~ msgstr "nekonata uzant-ID: %s" #~ msgid "to use user-ID %s you need to use -g too" #~ msgstr "por uzi uzant-ID %s nepras uzi ankaŭ opcion '-g'" #~ msgid "cannot set group-ID to %lu" #~ msgstr "ne eblas agordi grupan ID-on al %lu" #~ msgid "cannot set user-ID to %lu" #~ msgstr "ne eblas agordi uzantan ID-on al %lu" #~ msgid "failed to get file system create context" #~ msgstr "malsukcesis eltrovi dosiersisteman krean kuntekston" #~ msgid "warning: " #~ msgstr "averto: " #~ msgid "Usage: %s [OPTION]... [USERNAME]\n" #~ msgstr "Uzmaniero: %s [OPCIO...] [UZANTNOMO]\n" #~ msgid " --strict with --check, exit non-zero for any invalid input\n" #~ msgstr " --strict kun «--check»: eliri nenule por iu ajn nevalida enigo\n" #~ msgid "failed to redirect stderr to /dev/null" #~ msgstr "malsukcesis alidirektigi ĉeferar-eligujon al /dev/null" #~ msgid "invalid number: '%s'" #~ msgstr "nevalida numero: '%s'" #~ msgid "" #~ "\n" #~ "With no FILE or if FILE is -, read Standard Input. '-F /' by default.\n" #~ msgstr "" #~ "\n" #~ "Sen DOSIERO, aŭ kiam DOSIERO estas «-», ĉefenigujo legiĝas.\n" #~ "Defaŭlte uziĝas opcio «-F /».\n" #~ msgid "cannot remove directory: %s" #~ msgstr "ne eblas forigi dosierujon %s" #~ msgid "dup2 failed" #~ msgstr "malsukcesis dup2()" #~ msgid "couldn't execute %s" #~ msgstr "malsukcesis ruli %s" #~ msgid "couldn't execute %s -d" #~ msgstr "malsukcesis ruli '%s -d'" #~ msgid "" #~ "\n" #~ "Report %s bugs to %s\n" #~ msgstr "" #~ "\n" #~ "Raportu programmisojn en «%s» al <%s>.\n" #~ msgid "warning: --retry is useful mainly when following by name" #~ msgstr "averto: opcio '--retry' ĉefe utilas dum sekvado je nomo" #~ msgid "reading %s" #~ msgstr "legiĝas %s" #~ msgid "writing %s" #~ msgstr "skribiĝas %s" #~ msgid "closing %s" #~ msgstr "fermiĝas %s" #~ msgid "accessing %s" #~ msgstr "atingiĝas %s" #~ msgid "opening %s" #~ msgstr "malfermiĝas %s" #~ msgid "using single-precision arithmetic" #~ msgstr "uziĝas aritmetiko de simpla precizeco" #~ msgid "using arbitrary-precision arithmetic" #~ msgstr "uziĝas aritmetiko de arbitra precizeco" #~ msgid "WARNING: --page-increment is deprecated; use --line-increment instead" #~ msgstr "AVERTO: malrekomendatas '--page-increment'; uzu '--line-increment' anstataŭe" #~ msgid "All arguments to long options are mandatory for short options.\n" #~ msgstr "(Endaj argumentoj por longaj opcioj ankaŭ endas por la mallongaj.)\n" #~ msgid "" #~ "Option --string without a number implies 3; option --width without a number\n" #~ "implies 32. By default, od uses -A o -t oS -w16.\n" #~ msgstr "" #~ "Opcio '--string' sen nombro implikas 3; opcio '--width' sen nombro implikas 32.\n" #~ "Defaŭlte 'od' uzas '-A o -t oS -w16'.\n" #~ msgid "Usage: %s [OPTION]... FILE\n" #~ msgstr "Uzmaniero: %s [OPCIO...] DOSIERO\n" #~ msgid "Password:" #~ msgstr "Pasvorto:" #~ msgid "getpass: cannot open /dev/tty" #~ msgstr "getpass: ne eblas malfermi /dev/tty" #~ msgid "cannot set groups" #~ msgstr "malsukcesis agordi grupojn" #~ msgid "cannot set group id" #~ msgstr "malsukcesis agordi grupan ID-on" #~ msgid "cannot set user id" #~ msgstr "malsukcesis agordi uzantan ID-on" #~ msgid "Usage: %s [OPTION]... [-] [USER [ARG]...]\n" #~ msgstr "Uzmaniero: %s [OPCIO...] [-] [UZANTO [ARGUMENTO...]]\n" #~ msgid "" #~ "Change the effective user id and group id to that of USER.\n" #~ "\n" #~ " -, -l, --login make the shell a login shell\n" #~ " -c, --command=COMMAND pass a single COMMAND to the shell with -c\n" #~ " -f, --fast pass -f to the shell (for csh or tcsh)\n" #~ " -m, --preserve-environment do not reset environment variables\n" #~ " -p same as -m\n" #~ " -s, --shell=SHELL run SHELL if /etc/shells allows it\n" #~ msgstr "" #~ "Ŝanĝas la efektivan uzant-ID-on kaj grup-ID-on al tiu de UZANTO.\n" #~ "\n" #~ " -, -l, --login fari la ŝelon ensaluta ŝelo\n" #~ " -c. --command=KOMANDO pasi ununuran KOMANDOn al la ŝelo kun opcio '-c'\n" #~ " -f, --fast pasi opcion '-f' al la ŝelo (por 'csh' aŭ 'tcsh')\n" #~ " -m, --preserve-environment ne reagordi ĉirkaŭaĵajn variablojn\n" #~ " -p egalas al '-m'\n" #~ " -s, --shell=ŜELO lanĉi ŜELOn (se /etc/shells permesas ĝin)\n" #~ msgid "" #~ "\n" #~ "A mere - implies -l. If USER not given, assume root.\n" #~ msgstr "" #~ "\n" #~ "Nura «-» implikas «-l». Kiam UZANTO ne indikatas, \"root\" supoziĝas.\n" #~ msgid "user %s does not exist" #~ msgstr "uzanto %s ne ekzistas" #~ msgid "incorrect password" #~ msgstr "malĝusta pasvorto" #~ msgid "using restricted shell %s" #~ msgstr "uzatas limigita ŝelo %s" #~ msgid "warning: cannot change directory to %s" #~ msgstr "averto: malsukcesis ŝanĝi dosierujon al %s" #~ msgid "" #~ "\n" #~ "Examples:\n" #~ " %s /usr/bin/sort Output \"sort\".\n" #~ " %s include/stdio.h .h Output \"stdio\".\n" #~ msgstr "" #~ "\n" #~ "Ekzemploj:\n" #~ " %s /usr/bin/sort Eligaĵo estas \"sort\".\n" #~ " %s include/stdio.h .h Eligaĵo estas \"stdio\".\n" #~ msgid "" #~ "Usage: %s NAME\n" #~ " or: %s OPTION\n" #~ msgstr "" #~ "Uzmaniero: %s NOMO\n" #~ " aŭ: %s OPCIO\n" #~ msgid "cannot create link %s" #~ msgstr "ne eblas krei ligon %s" #~ msgid "Filesystem " #~ msgstr "Dosiersistemo " #~ msgid " Inodes IUsed IFree IUse%" #~ msgstr " I-nodoj I-uzata Ilibr Iuza%" #~ msgid " Size Used Avail Use%" #~ msgstr " Grand Uzat Liber Uza%" #~ msgid " Size Used Avail Use%" #~ msgstr " Grando Uzata Liber Uza%" #~ msgid " %s-blocks Used Available Capacity" #~ msgstr " %s-blokoj Uzataj Liberaj Kapacito" #~ msgid " %4s-blocks Used Available Use%%" #~ msgstr " %4s-blokoj Uzataj Liberaj Uza%%" #~ msgid "WARNING: --preserve_context is deprecated; use --preserve-context instead" #~ msgstr "AVERTO: malrekomendatas '--preserve_context'; uzu '--preserve-context' anstataŭe" #~ msgid "invalid number of lines: 0" #~ msgstr "nevalida nombro da linioj: 0" #~ msgid "invalid argument: %s" #~ msgstr "nevalida argumento: %s" #~ msgid "cannot remove directory %s" #~ msgstr "ne eblas forigi dosierujon %s" #~ msgid "non-numeric argument" #~ msgstr "nenumera argumento" #~ msgid "cannot run command %s" #~ msgstr "ne eblas ruli komandon %s"