# Messages français de procps-ng
# Copyright (C) 2014 Free Software Foundation, Inc.
# This file is distributed under the same license as the procps-ng package.
# Frédéric Marchal <fmarchal@perso.be>, 2014.
#
# La qualité de cette traduction est vraiment très mauvaise car:
# 1) la mise en forme des messages impose des contraintes insensées: traduire
#    en deux lettres les mots wait, idle, swap, running, sleeping ou en cinq
#    lettres le mot « disk » (liste non exhaustive);
# 2) les messages utilisent un jargon technique qui n'a pas d'équivalent suffisament
#    explicite en français pour être abrégé: le concis « swap size » devient
#    « taille de la partition d'échange », « renice » devient l'horible « change la
#    courtoisie » ou « pages paged in » devient « pages lues depuis le disque »;
# 3) certains messages contiennent des mots de une ou deux lettres dont je n'ai
#    pas su trouver la signification, même avec le code source.
# Bref, j'abandonne la traduction après six mois de recherches et j'attends que les
# utilisateurs hurlent et me proposent des correcions.
msgid ""
msgstr ""
"Project-Id-Version: procps-ng 3.3.9.23\n"
"Report-Msgid-Bugs-To: procps@freelists.org\n"
"POT-Creation-Date: 2014-02-22 11:18+1100\n"
"PO-Revision-Date: 2014-08-29 14:08+0200\n"
"Last-Translator: Frédéric Marchal <fmarchal@perso.be>\n"
"Language-Team: French <traduc@traduc.org>\n"
"Language: fr\n"
"X-Bugs: Report translation errors to the Language-Team address.\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=2; plural=(n > 1);\n"

#: free.c:74 slabtop.c:189 uptime.c:59 w.c:443
#, c-format
msgid " %s [options]\n"
msgstr " %s [options]\n"

#: free.c:76
msgid " -b, --bytes         show output in bytes\n"
msgstr " -b, --bytes         afficher la sortie en octets\n"

#: free.c:77
msgid " -k, --kilo          show output in kilobytes\n"
msgstr " -k, --kilo          afficher la sortie en kilo-octets\n"

#: free.c:78
msgid " -m, --mega          show output in megabytes\n"
msgstr " -m, --mega          afficher la sortie en méga-octets\n"

#: free.c:79
msgid " -g, --giga          show output in gigabytes\n"
msgstr " -g, --giga          afficher la sortie en giga-octets\n"

#: free.c:80
msgid "     --tera          show output in terabytes\n"
msgstr "     --tera          afficher la sortie en téra-octets\n"

#: free.c:81
msgid " -h, --human         show human-readable output\n"
msgstr " -h, --human         afficher la sortie sous forme lisible par un humain\n"

#: free.c:82
msgid "     --si            use powers of 1000 not 1024\n"
msgstr "     --si            utiliser des puissances de 1000 au lieu de 1024\n"

#: free.c:83
msgid " -l, --lohi          show detailed low and high memory statistics\n"
msgstr " -l, --lohi          afficher des statistiques détaillées pour les mémoires basse et haute\n"

#: free.c:84
msgid " -o, --old           use old format (without -/+buffers/cache line)\n"
msgstr " -o, --old           utiliser l'ancien format (sans la ligne -/+tampon/cache)\n"

#: free.c:85
msgid " -t, --total         show total for RAM + swap\n"
msgstr " -t, --total         afficher le total de la RAM + swap\n"

#: free.c:86
msgid " -s N, --seconds N   repeat printing every N seconds\n"
msgstr " -s N, --seconds N   répéter l'affichage toutes les N secondes\n"

#: free.c:87
msgid " -c N, --count N     repeat printing N times, then exit\n"
msgstr " -c N, --count N     répéter l'affichage N fois puis termine\n"

#: free.c:89 w.c:452
msgid "     --help     display this help and exit\n"
msgstr "     --help     afficher cette aide et termine\n"

#: free.c:270
#, c-format
msgid "seconds argument `%s' failed"
msgstr "l'argument des secondes « %s » n'est pas valable"

#: free.c:273
#, c-format
msgid "seconds argument `%s' is not positive number"
msgstr "l'argument des secondes « %s » n'est pas un nombre positif"

#: free.c:279
msgid "failed to parse count argument"
msgstr "l'argument du nombre de répétitions ne peut pas être décodé"

#: free.c:282
#, c-format
msgid "failed to parse count argument: '%s'"
msgstr "échec du décodage de l'argument du nombre de répétitions: « %s »"

#. Translation Hint: You can use 9 character words in
#. * the header, and the words need to be right align to
#. * beginning of a number.
#: free.c:299
msgid "             total       used       free     shared    buffers     cached"
msgstr "             total       utilisé    libre    partagé   tampons     cache"

#: free.c:300
msgid "Mem:"
msgstr "Mem:"

#: free.c:315
msgid "Low:"
msgstr "Basse:"

#: free.c:321
msgid "High:"
msgstr "Haute:"

#: free.c:330
#, c-format
msgid "-/+ buffers/cache:"
msgstr "-/+ tampons/cache:"

#: free.c:337
msgid "Swap:"
msgstr "Partition d'échange:"

#: free.c:344
msgid "Total:"
msgstr "Total:"

#: lib/fileutils.c:38
msgid "write error"
msgstr "erreur d'écriture"

#: pgrep.c:104
#, c-format
msgid " %s [options] <pattern>\n"
msgstr "%s [options] <motif>\n"

#: pgrep.c:107
msgid " -d, --delimiter <string>  specify output delimiter\n"
msgstr " -d, --delimiter <chaîne> désigne le délimiteur de sortie\n"

#: pgrep.c:108
msgid " -l, --list-name           list PID and process name\n"
msgstr " -l, --list-name           liste le PID et le nom du processus\n"

#: pgrep.c:109
msgid " -v, --inverse             negates the matching\n"
msgstr " -v, --inverse             inverse le sens de la correspondance\n"

#: pgrep.c:110
msgid " -w, --lightweight         list all TID\n"
msgstr " -w, --lightweight         liste tous les TID\n"

#: pgrep.c:113
msgid " -<sig>, --signal <sig>    signal to send (either number or name)\n"
msgstr " -<sig>, --signal <sig>    signal à envoyer (<sig> est le numéro ou le nom du signal)\n"

#: pgrep.c:114
msgid " -e, --echo                display what is killed\n"
msgstr " -e, --echo                affiche ce qui est tué\n"

#: pgrep.c:116
msgid " -c, --count               count of matching processes\n"
msgstr " -c, --count               compte les processus correspondants\n"

#: pgrep.c:117
msgid " -f, --full                use full process name to match\n"
msgstr " -f, --full                correspondance sur le nom complet du processus\n"

#: pgrep.c:118
msgid " -g, --pgroup <PGID,...>   match listed process group IDs\n"
msgstr " -g, --pgroup <PGID,…>     affiche les ID de groupe des processus listés\n"

#: pgrep.c:119
msgid " -G, --group <GID,...>     match real group IDs\n"
msgstr " -G, --group <GID,…>       correspondance sur le ID de groupe réel\n"

#: pgrep.c:120
msgid " -n, --newest              select most recently started\n"
msgstr " -n, --newest              sélectionne le plus récemment démarré\n"

#: pgrep.c:121
msgid " -o, --oldest              select least recently started\n"
msgstr " -o, --oldest              sélectionne le moins récemment démarré\n"

#: pgrep.c:122
msgid " -P, --parent <PPID,...>   match only child processes of the given parent\n"
msgstr " -P, --parent <PPID,…>     correspondance parmi les processus enfants du parent donné\n"

#: pgrep.c:123
msgid " -s, --session <SID,...>   match session IDs\n"
msgstr " -s, --session <SID,…>     correspondance sur le ID de session\n"

#: pgrep.c:124
msgid " -t, --terminal <tty,...>  match by controlling terminal\n"
msgstr " -t, --terminal <tty,…>    correspondance sur le terminal contrôlant\n"

#: pgrep.c:125
msgid " -u, --euid <ID,...>       match by effective IDs\n"
msgstr " -u, --euid <ID,…>         correspondance sur le ID effectif\n"

#: pgrep.c:126
msgid " -U, --uid <ID,...>        match by real IDs\n"
msgstr " -U, --uid <ID,…>          correspondance sur le ID réel\n"

#: pgrep.c:127
msgid " -x, --exact               match exactly with the command name\n"
msgstr " -x, --exact               correspondance exacte avec le nom de la commande\n"

#: pgrep.c:128
msgid " -F, --pidfile <file>      read PIDs from file\n"
msgstr " -F, --pidfile <fichier>   lire les PID depuis le fichier\n"

#: pgrep.c:129
msgid " -L, --logpidfile          fail if PID file is not locked\n"
msgstr " -L, --logpidfile          échoue si le fichier PID n'est pas verrouillé\n"

#: pgrep.c:130
msgid ""
" --ns <PID>                match the processes that belong to the same\n"
"                           namespace as <pid>\n"
msgstr ""
" --ns <PID>                trouve les processus qui appartiennent au même\n"
"                           espace de nom que <PID>\n"

#: pgrep.c:132
msgid ""
" --nslist <ns,...>         list which namespaces will be considered for\n"
"                           the --ns option.\n"
"                           Available namespaces: ipc, mnt, net, pid, user, uts\n"
msgstr ""
" --nslist <ns,…>           liste les espaces de noms qui seront acceptés par\n"
"                           l'option --ns.\n"
"                           Espaces de noms disponibles: ipc, mnt, net, pid, user, uts\n"

#: pgrep.c:273
#, c-format
msgid "invalid user name: %s"
msgstr "nom d'utilisateur invalide: %s"

#: pgrep.c:290
#, c-format
msgid "invalid group name: %s"
msgstr "nom de groupe invalide: %s"

#: pgrep.c:301
#, c-format
msgid "invalid process group: %s"
msgstr "groupe de processus invalide: %s"

#: pgrep.c:313
#, c-format
msgid "invalid session id: %s"
msgstr "ID de session invalide: %s"

#: pgrep.c:325
#, c-format
msgid "not a number: %s"
msgstr "pas un nombre: %s"

#: pgrep.c:506
msgid "Error reading reference namespace information\n"
msgstr "Erreur lors de la lecture des informations de l'espace de nom de référence\n"

#: pgrep.c:609 pidof.c:226 pidof.c:267 sysctl.c:628
msgid "internal error"
msgstr "erreur interne"

#: pgrep.c:878
#, c-format
msgid ""
"-L without -F makes no sense\n"
"Try `%s --help' for more information."
msgstr ""
"-L sans -F n'a pas de sens\n"
"Essayez « %s --help » pour plus d'informations."

#: pgrep.c:885
#, c-format
msgid ""
"pidfile not valid\n"
"Try `%s --help' for more information."
msgstr ""
"fichier pid pas valable\n"
"Essayez « %s --help » pour plus d'informations."

#: pgrep.c:893
#, c-format
msgid ""
"only one pattern can be provided\n"
"Try `%s --help' for more information."
msgstr ""
"fournissez un seul motif à la fois\n"
"Essayez « %s --help » pour plus d'informations."

#: pgrep.c:897
#, c-format
msgid ""
"no matching criteria specified\n"
"Try `%s --help' for more information."
msgstr ""
"aucun critère correspondant spécifié\n"
"Essayez « %s --help » pour plus d'informations."

#: pgrep.c:924
#, c-format
msgid "%s killed (pid %lu)\n"
msgstr "%s tué (pid %lu)\n"

#: pgrep.c:930
#, c-format
msgid "killing pid %ld failed"
msgstr "le pid %ld n'a pu être tué"

#: pidof.c:61
#, c-format
msgid " %s [options] [program [...]]\n"
msgstr " %s [options] [programme […]]\n"

#: pidof.c:63
msgid " -s, --single-shot         return one PID only\n"
msgstr " -s, --single-shot         retourne un seul PID\n"

#: pidof.c:64
msgid " -c, --check-root          omit processes with different root\n"
msgstr " -c, --check-root          omet les processus avec des racines différentes\n"

#: pidof.c:65
msgid " -x                        also find shells running the named scripts\n"
msgstr " -x                        trouve aussi les shells exécutant les scripts nommés\n"

#: pidof.c:66
msgid " -o, --omit-pid <PID,...>  omit processes with PID\n"
msgstr " -o, --omit-pid <PID,…>    omet les processus avec ce PID\n"

#: pidof.c:270
#, c-format
msgid "illegal omit pid value (%s)!\n"
msgstr "valeur de pid à omettre invalide (%s) !\n"

#: pmap.c:61
msgid "Address"
msgstr "Adresse"

#: pmap.c:62
msgid "Offset"
msgstr "Décalage"

#: pmap.c:63
msgid "Device"
msgstr "Périphérique"

#: pmap.c:64
msgid "Mapping"
msgstr "Carte"

#: pmap.c:68
msgid "Perm"
msgstr "Perm"

#: pmap.c:69
msgid "Inode"
msgstr "Inode"

#: pmap.c:72
msgid "Kbytes"
msgstr "kilo-octets"

#: pmap.c:73
msgid "Mode"
msgstr "Mode"

#: pmap.c:74
msgid "RSS"
msgstr "RSS"

#: pmap.c:75
msgid "Dirty"
msgstr "Modifié"

#: pmap.c:109
#, c-format
msgid " %s [options] PID [PID ...]\n"
msgstr " %s [options] PID [PID …]\n"

#: pmap.c:111
msgid " -x, --extended              show details\n"
msgstr " -x, --extended              montre les détails\n"

#: pmap.c:112
msgid " -X                          show even more details\n"
msgstr " -X                          montre plus de détails\n"

#: pmap.c:113
msgid "            WARNING: format changes according to /proc/PID/smaps\n"
msgstr "            ATTENTION: le format change selon /proc/PID/smaps\n"

#: pmap.c:114
msgid " -XX                         show everything the kernel provides\n"
msgstr " -XX                         montre tout ce que le kernel fournis\n"

#: pmap.c:115
msgid " -c, --read-rc               read the default rc\n"
msgstr " -c, --read-rc               lit le rc par défaut\n"

#: pmap.c:116
msgid " -C, --read-rc-from=<file>   read the rc from file\n"
msgstr " -C, --read-rc-from=<fichier> lit le rc dans le fichier\n"

#: pmap.c:117
msgid " -n, --create-rc             create new default rc\n"
msgstr " -n, --create-rc             crée un nouveau rc par défaut\n"

#: pmap.c:118
msgid " -N, --create-rc-to=<file>   create new rc to file\n"
msgstr " -N, --create-rc-to=<fichier> crée un nouveau rc dans le fichier\n"

#: pmap.c:119
msgid "            NOTE: pid arguments are not allowed with -n, -N\n"
msgstr "            NOTE: un pid n'est pas accepté comme argument avec -n, -N\n"

#: pmap.c:120
msgid " -d, --device                show the device format\n"
msgstr " -d, --device                montre le format du périphérique\n"

#: pmap.c:121
msgid " -q, --quiet                 do not display header and footer\n"
msgstr " -q, --quiet                 n'affiche pas l'en-tête ni le pied de page\n"

#: pmap.c:122
msgid " -p, --show-path             show path in the mapping\n"
msgstr " -p, --show-path             montre le chemin dans la carte\n"

#: pmap.c:123
msgid " -A, --range=<low>[,<high>]  limit results to the given range\n"
msgstr " -A, --range=<min>[,<max>]   limite les résultats à l'intervalle donné\n"

#: pmap.c:201
msgid "shared memory detach"
msgstr "détacher mémoire partagée"

#: pmap.c:205
msgid "shared memory remove"
msgstr "retirer mémoire partagée"

#: pmap.c:238
msgid "  [ anon ]"
msgstr "  [ anon ]"

#: pmap.c:240
msgid "  [ stack ]"
msgstr "  [ pile  ]"

#: pmap.c:325
msgid "Unknown format in smaps file!"
msgstr "Format inconnu dans le fichier smaps !"

#: pmap.c:367
msgid "inconsistent detail field in smaps file, line:\n"
msgstr "champ de détail inconsistant dans le fichier smaps à la ligne:\n"

#: pmap.c:713
msgid "total kB"
msgstr "ko total"

#: pmap.c:724
#, c-format
msgid "mapped: %ldK    writeable/private: %ldK    shared: %ldK\n"
msgstr "mappé: %ldK     inscriptible/privé: %ldK   partagé: %ldK\n"

#. Translation Hint: keep total string length
#. * as 24 characters. Adjust %16 if needed
#: pmap.c:733
#, c-format
msgid " total %16ldK\n"
msgstr " total %16ldK\n"

#. Translation Hint: keep total string length
#. * as 16 characters. Adjust %8 if needed
#: pmap.c:739
#, c-format
msgid " total %8ldK\n"
msgstr " total %8ldK\n"

#: pmap.c:766 skill.c:502 skill.c:535 skill.c:622 tload.c:128 tload.c:133
#: vmstat.c:960 vmstat.c:969 watch.c:627
msgid "failed to parse argument"
msgstr "échec de l'analyse de l'argument"

#: pmap.c:810
#, c-format
msgid "config line too long - line %d"
msgstr "ligne de configuration trop longue – ligne %d"

#: pmap.c:835
#, c-format
msgid "unsupported section found in the config - line %d"
msgstr "section non supportée dans la config – ligne %d"

#: pmap.c:838 pmap.c:849 pmap.c:860 pmap.c:879 pmap.c:891
#, c-format
msgid "syntax error found in the config - line %d"
msgstr "erreur de syntaxe dans la config – ligne %d"

#: pmap.c:910
msgid "the file already exists - delete or rename it first"
msgstr "le fichier existe déjà – effacez ou renommez-le d'abord"

#: pmap.c:973
msgid "HOME variable undefined"
msgstr "variable HOME non définie"

#: pmap.c:981
msgid "memory allocation failed"
msgstr "l'allocation de mémoire a échoué"

#: pmap.c:1033
msgid "option -r is ignored as SunOS compatibility"
msgstr "l'option -r est ignorée par compatibilité avec SunOS"

#: pmap.c:1080
msgid "options -c, -C, -d, -n, -N, -x, -X are mutually exclusive"
msgstr "les options -c, -C, -d, -n, -N, -x, -X sont mutuellement exclusives"

#: pmap.c:1083
msgid "options -p, -q are mutually exclusive with -n, -N"
msgstr "les options -p et -q sont exclues avec -n et -N"

#: pmap.c:1086
msgid "too many arguments"
msgstr "trop d'arguments"

#: pmap.c:1090
msgid "rc file successfully created, feel free to edit the content"
msgstr "fichier rc créé avec succès, vous pouvez éditer son contenu"

#: pmap.c:1093
msgid "couldn't create the rc file"
msgstr "le fichier rc n'a pu être créé"

#: pmap.c:1105
#, c-format
msgid "~/.%src file successfully created, feel free to edit the content"
msgstr "fichier ~/.%src créé, vous pouvez éditer son contenu"

#: pmap.c:1108
#, c-format
msgid "couldn't create ~/.%src"
msgstr "n'a pu créer ~/.%src"

#: pmap.c:1113
msgid "argument missing"
msgstr "argument manquant"

#: pmap.c:1127
msgid "couldn't read the rc file"
msgstr "le fichier rc n'a pu être lu"

#: pmap.c:1129
#, c-format
msgid "couldn't read ~/.%src"
msgstr "n'a pu lire ~/.%src"

#: ps/display.c:54
#, c-format
msgid "Signal %d (%s) caught by %s (%s).\n"
msgstr "Signal %d (%s) intercepté par %s (%s).\n"

#: ps/display.c:66 ps/display.c:270 ps/parser.c:502 ps/parser.c:747
#: ps/select.c:95 ps/sortformat.c:550
msgid "please report this bug"
msgstr "merci de rapporter ce bug"

#: ps/display.c:349 ps/display.c:522
#, c-format
msgid "error: can not access /proc\n"
msgstr "erreur: pas d'accès à /proc\n"

#: ps/display.c:397
#, c-format
msgid "could not find start_time\n"
msgstr "n'a pu trouver start_time\n"

#: ps/display.c:408
#, c-format
msgid "could not find ppid\n"
msgstr "n'a pu trouver le ppid\n"

#: ps/global.c:170
#, c-format
msgid "your %dx%d screen size is bogus. expect trouble\n"
msgstr "votre taille d'écran %dx%d est fausse. Attendez-vous à des problèmes\n"

#: ps/global.c:243 ps/global.c:255
msgid "environment specified an unknown personality"
msgstr "l'environnement a spécifié une personnalité inconnue"

#: ps/global.c:247
#, c-format
msgid "cannot strdup() personality text\n"
msgstr "le texte de la personnalité ne peut être dupliqué avec strdup()\n"

#. Translation Note:
#. . The following translatable word will be used to recognize the
#. . user's request for help text.  In other words, the translation
#. . you provide will alter program behavior.
#. .
#. . It must be limited to 15 characters or less.
#.
#: ps/global.c:410
msgid "help"
msgstr "aide"

#. Translation Notes for ps Help #1 ---------------------------------
#. .  This next group of lines represents 6 pairs of words + abbreviations
#. .  which are the basis of the 'ps' program help text.
#. .
#. .  The words and abbreviations you provide will alter program behavior.
#. .  They will also appear in the help usage summary associated with the
#. .  "Notes for ps Help #2" below.
#. .
#. .  In their English form, help text would look like this:
#. .      Try 'ps --help <simple|list|output|threads|misc|all>'
#. .       or 'ps --help <s|l|o|t|m|a>'
#. .      for additional help text.
#. .
#. .  When translating these 6 pairs you may choose any appropriate
#. .  language equivalents and the only requirement is the abbreviated
#. .  representations must be unique.
#. .
#. .  By default, those abbreviations are single characters.  However,
#. .  they are not limited to only one character after translation.
#. .
#. Translation Hint, Pair #1
#: ps/help.c:63
msgid "simple"
msgstr "simple"

#: ps/help.c:63
msgid "s"
msgstr "s"

#. Translation Hint, Pair #2
#: ps/help.c:65
msgid "list"
msgstr "liste"

#: ps/help.c:65
msgid "l"
msgstr "l"

#. Translation Hint, Pair #3
#: ps/help.c:67
msgid "output"
msgstr "sortie"

#: ps/help.c:67
msgid "o"
msgstr "o"

#. Translation Hint, Pair #4
#: ps/help.c:69
msgid "threads"
msgstr "threads"

#: ps/help.c:69
msgid "t"
msgstr "h"

#. Translation Hint, Pair #5
#: ps/help.c:71
msgid "misc"
msgstr "divers"

#: ps/help.c:71
msgid "m"
msgstr "d"

#. Translation Hint, Pair #6
#: ps/help.c:73
msgid "all"
msgstr "tous"

#: ps/help.c:73
msgid "a"
msgstr "t"

#: ps/help.c:94
#, c-format
msgid ""
"\n"
"Usage:\n"
" %s [options]\n"
msgstr ""
"\n"
"Usage:\n"
" %s [options]\n"

#: ps/help.c:99
msgid ""
"\n"
"Basic options:\n"
msgstr ""
"\n"
"Options de base:\n"

#: ps/help.c:100
msgid " -A, -e               all processes\n"
msgstr " -A, -e               tous les processus\n"

#: ps/help.c:101
msgid " -a                   all with tty, except session leaders\n"
msgstr " -a                   tous avec un tty sauf les têtes de sessions\n"

#: ps/help.c:102
msgid "  a                   all with tty, including other users\n"
msgstr "  a                   tous avec un tty y compris les autres utilisateurs\n"

#: ps/help.c:103
msgid " -d                   all except session leaders\n"
msgstr " -d                   tous sauf les têtes de sessions\n"

#: ps/help.c:104
msgid " -N, --deselect       negate selection\n"
msgstr " -N, --deselect       inverse la sélection\n"

#: ps/help.c:105
msgid "  r                   only running processes\n"
msgstr "  r                   seuls les processus s'exécutant\n"

#: ps/help.c:106
msgid "  T                   all processes on this terminal\n"
msgstr "  T                   tous les processus sur ce terminal\n"

#: ps/help.c:107
msgid "  x                   processes without controlling ttys\n"
msgstr "  x                   processus sans ttys contrôlant\n"

#: ps/help.c:110
msgid ""
"\n"
"Selection by list:\n"
msgstr ""
"\n"
"Sélection par liste:\n"

#: ps/help.c:111
msgid " -C <command>         command name\n"
msgstr " -C <commande>        nom de la commande\n"

#: ps/help.c:112
msgid " -G, --Group <GID>    real group id or name\n"
msgstr " -G, --Group <GID>    ID ou nom réel du groupe\n"

#: ps/help.c:113
msgid " -g, --group <group>  session or effective group name\n"
msgstr " -g, --group <groupe> session ou nom de group effectif\n"

#: ps/help.c:114
msgid " -p, --pid <PID>      process id\n"
msgstr " -p, --pid <PID>      ID du processus\n"

#: ps/help.c:115
msgid "     --ppid <PID>     select by parent process id\n"
msgstr "     --ppid <PID>     sélection par ID du processus parent\n"

#: ps/help.c:116
msgid " -s, --sid <session>  session id\n"
msgstr " -s, --sid <session>  ID de session\n"

#: ps/help.c:117
msgid " -t, t, --tty <tty>   terminal\n"
msgstr " -t, t, --tty <tty>   terminal\n"

#: ps/help.c:118
msgid " -u, U, --user <UID>  effective user id or name\n"
msgstr " -u, U, --user <UID>  nom ou ID de l'utilisateur effectif\n"

#: ps/help.c:119
msgid " -U, --User <UID>     real user id or name\n"
msgstr " -U, --User <UID>     nom ou ID de l'utilisateur réel\n"

#: ps/help.c:120
msgid ""
"\n"
"  The selection options take as their argument either:\n"
"    a comma-separated list e.g. '-u root,nobody' or\n"
"    or a blank-separated list e.g. '-p 123 4567'\n"
msgstr ""
"\n"
"  Les options de sélection prennent comme argument\n"
"    une liste séparée par des virgules (par exemple,\n"
"    « -u root,nobody ») ou une liste séparée par des\n"
"    espaces (par exemple, « -p 123 4567 »)\n"

#: ps/help.c:126
msgid ""
"\n"
"Output formats:\n"
msgstr ""
"\n"
"Formats de sortie:\n"

#: ps/help.c:127
msgid " -F                   extra full\n"
msgstr " -F                   vraiment complet\n"

#: ps/help.c:128
msgid " -f                   full-format, including command lines\n"
msgstr " -f                   format complet y compris les lignes de commande\n"

#: ps/help.c:129
msgid "  f, --forest         ascii art process tree\n"
msgstr " f, --forest          arbre des processus en art ascii\n"

#: ps/help.c:130
msgid " -H                   show process hierarchy\n"
msgstr " -H                   montre la hiérarchie des processus\n"

#: ps/help.c:131
msgid " -j                   jobs format\n"
msgstr " -j                   format de la tâche\n"

#: ps/help.c:132
msgid "  j                   BSD job control format\n"
msgstr "  j                   format de contrôle de la tâche BSD\n"

#: ps/help.c:133
msgid " -l                   long format\n"
msgstr " -l                   format long\n"

#: ps/help.c:134
msgid "  l                   BSD long format\n"
msgstr "  l                   format long BSD\n"

#: ps/help.c:135
msgid " -M, Z                add security data (for SELinux)\n"
msgstr " -M, Z                ajoute les données de sécurité (pour SELinux)\n"

#: ps/help.c:136
msgid " -O <format>          preloaded with default columns\n"
msgstr " -O <format>          pré-remplir avec les colonnes par défaut\n"

#: ps/help.c:137
msgid "  O <format>          as -O, with BSD personality\n"
msgstr "  O <format>          comme -O avec la personnalité BSD\n"

#: ps/help.c:138
msgid ""
" -o, o, --format <format>\n"
"                      user-defined format\n"
msgstr ""
" -o, o, --format <format>\n"
"                      format défini par l'utilisateur\n"

#: ps/help.c:140
msgid "  s                   signal format\n"
msgstr "  s                   format de signal\n"

#: ps/help.c:141
msgid "  u                   user-oriented format\n"
msgstr "  u                   format orienté utilisateur\n"

#: ps/help.c:142
msgid "  v                   virtual memory format\n"
msgstr "  v                   format de mémoire virtuelle\n"

#: ps/help.c:143
msgid "  X                   register format\n"
msgstr "  X                   format de registre\n"

#: ps/help.c:144
msgid " -y                   do not show flags, show rrs vs. addr (used with -l)\n"
msgstr " -y                   ne montre pas les fanions, montre rrs/adr (utilisé avec -l)\n"

#: ps/help.c:145
msgid "     --context        display security context (for SELinux)\n"
msgstr "     --context        affiche le contexte de sécurité (pour SELinux)\n"

#: ps/help.c:146
msgid "     --headers        repeat header lines, one per page\n"
msgstr "     --headers        répète les lignes d'en-tête, une par page\n"

#: ps/help.c:147
msgid "     --no-headers     do not print header at all\n"
msgstr "     --no-headers     ne pas afficher du tout d'en-tête\n"

#: ps/help.c:148
msgid ""
"     --cols, --columns, --width <num>\n"
"                      set screen width\n"
msgstr ""
"     --cols, --columns, --width <num>\n"
"                      change la largeur de l'écran\n"

#: ps/help.c:150
msgid ""
"     --rows, --lines <num>\n"
"                      set screen height\n"
msgstr ""
"     --rows, --lines <num>\n"
"                      change la hauteur de l'écran\n"

#: ps/help.c:154
msgid ""
"\n"
"Show threads:\n"
msgstr ""
"\n"
"Montre les threads:\n"

#: ps/help.c:155
msgid "  H                   as if they were processes\n"
msgstr "  H                   comme si ils étaient des processus\n"

#: ps/help.c:156
msgid " -L                   possibly with LWP and NLWP columns\n"
msgstr " -L                   éventuellement avec les colonnes LWP et NLWP\n"

#: ps/help.c:157
msgid " -m, m                after processes\n"
msgstr " -m, m                après les processus\n"

#: ps/help.c:158
msgid " -T                   possibly with SPID column\n"
msgstr " -T                   éventuellement avec la colonne SPID\n"

#: ps/help.c:161
msgid ""
"\n"
"Miscellaneous options:\n"
msgstr ""
"\n"
"Options diverses:\n"

#: ps/help.c:162
msgid " -c                   show scheduling class with -l option\n"
msgstr " -c                   montre la classe d'ordonnancement avec l'option -l\n"

#: ps/help.c:163
msgid "  c                   show true command name\n"
msgstr "  c                   montre le vrai nom de commande\n"

#: ps/help.c:164
msgid "  e                   show the environment after command\n"
msgstr "  e                   montre l'environnement après la commande\n"

#: ps/help.c:165
msgid "  k,    --sort        specify sort order as: [+|-]key[,[+|-]key[,...]]\n"
msgstr "  k,    --sort        indique l'ordre de tri: [+|-]clé[,[+|-]clé[,…]]\n"

#: ps/help.c:166
msgid "  L                   show format specifiers\n"
msgstr "  L                   montre le spécificateur de format\n"

#: ps/help.c:167
msgid "  n                   display numeric uid and wchan\n"
msgstr "  n                   affiche les uid et wchan sous forme numérique\n"

#: ps/help.c:168
msgid "  S,    --cumulative  include some dead child process data\n"
msgstr "  S,    --cumulative  inclus quelques données sur les processus enfants terminés\n"

#: ps/help.c:169
msgid " -y                   do not show flags, show rss (only with -l)\n"
msgstr " -y                   ne montre pas les fanions, montre rss (uniquement avec -l)\n"

#: ps/help.c:170
msgid " -V, V, --version     display version information and exit\n"
msgstr " -V, V, --version     affiche les informations de version et arrête\n"

#: ps/help.c:171
msgid " -w, w                unlimited output width\n"
msgstr " -w, w                sortie sur largeur illimitée\n"

#: ps/help.c:172
#, c-format
msgid ""
"\n"
"        --%s <%s|%s|%s|%s|%s|%s>\n"
"                      display help and exit\n"
msgstr ""
"\n"
"        --%s <%s|%s|%s|%s|%s|%s>\n"
"                      affiche l'aide et arrête\n"

#. Translation Notes for ps Help #2 ---------------------------------
#. .  Most of the following c-format string is derived from the 6
#. .  pairs of words + chars mentioned above in "Notes for ps Help #1".
#. .
#. .  In its full English form, help text would look like this:
#. .      Try 'ps --help <simple|list|output|threads|misc|all>'
#. .       or 'ps --help <s|l|o|t|m|a>'
#. .      for additional help text.
#. .
#. .  The word for "help" will be translated elsewhere.  Thus, the only
#. .  translations below will be: "Try", "or" and "for additional...".
#. .
#: ps/help.c:193
#, c-format
msgid ""
"\n"
" Try '%s --%s <%s|%s|%s|%s|%s|%s>'\n"
"  or '%s --%s <%s|%s|%s|%s|%s|%s>'\n"
" for additional help text.\n"
msgstr ""
"\n"
" Essayez '%s --%s <%s|%s|%s|%s|%s|%s>'\n"
"  ou '%s --%s <%s|%s|%s|%s|%s|%s>'\n"
" pour plus d'aide.\n"

#: ps/help.c:206
#, c-format
msgid ""
"\n"
"For more details see ps(1).\n"
msgstr ""
"\n"
"Pour plus de détails, consultez ps(1).\n"

#: ps/output.c:2058
#, c-format
msgid "fix bigness error\n"
msgstr "corriger l'erreur d'ordre des octets\n"

#: ps/output.c:2133
#, c-format
msgid "bad alignment code\n"
msgstr "mauvais code d'alignement\n"

#: ps/output.c:2195
#, c-format
msgid "unknown page size (assume 4096)\n"
msgstr "taille de page inconnue (4096 supposé)\n"

#: ps/parser.c:58
msgid "the option is exclusive: "
msgstr "l'option est exclusive: "

#: ps/parser.c:84
msgid "process ID list syntax error"
msgstr "erreur de syntaxe dans la liste des ID de processus"

#: ps/parser.c:85 ps/parser.c:86
msgid "process ID out of range"
msgstr "ID de processus hors limites"

#: ps/parser.c:99
msgid "user name does not exist"
msgstr "le nom d'utilisateur n'existe pas"

#: ps/parser.c:105
msgid "user ID out of range"
msgstr "ID utilisateur hors limites"

#: ps/parser.c:118
msgid "group name does not exist"
msgstr "le nom du groupe n'existe pas"

#: ps/parser.c:124
msgid "group ID out of range"
msgstr "ID du groupe hors limites"

#: ps/parser.c:140 ps/parser.c:164
msgid "TTY could not be found"
msgstr "le TTY n'a pu être trouvé"

#: ps/parser.c:166
msgid "list member was not a TTY"
msgstr "l'élément de la liste n'était pas un TTY"

#: ps/parser.c:191
msgid "improper list"
msgstr "liste incorrecte"

#: ps/parser.c:251
msgid "list of command names must follow -C"
msgstr "la liste des noms de commandes doit suivre -C"

#: ps/parser.c:265
msgid "list of real groups must follow -G"
msgstr "la liste des groupes réels doit suivre -G"

#: ps/parser.c:278
msgid "list of jobs must follow -J"
msgstr "la liste des tâches doit suivre -J"

#: ps/parser.c:306
msgid "format or sort specification must follow -O"
msgstr "la spécification de format ou de tri doit suivre -O"

#: ps/parser.c:317
msgid "list of PRM groups must follow -R"
msgstr "la liste des groupes PRM doit suivre -R"

#: ps/parser.c:336
msgid "list of real users must follow -U"
msgstr "la liste des utilisateurs réels doit suivre -U"

#: ps/parser.c:377
msgid "list of session leaders OR effective group names must follow -g"
msgstr "la liste des têtes de sessions OU des noms de groupes effectifs doit suivre -g"

#: ps/parser.c:388
msgid "list of session leaders OR effective group IDs was invalid"
msgstr "la liste des têtes de sessions OU des ID de groupes effectifs était invalide"

#: ps/parser.c:407
msgid "alternate System.map file must follow -n"
msgstr "le fichier System.map alternatif doit suivre -n"

#: ps/parser.c:418
msgid "format specification must follow -o"
msgstr "le spécificateur de format doit suivre -o"

#: ps/parser.c:424
msgid "list of process IDs must follow -p"
msgstr "la liste des ID des processus doit suivre -p"

#: ps/parser.c:433
msgid "the -r option is reserved"
msgstr "l'option -r est réservée"

#: ps/parser.c:439
msgid "list of session IDs must follow -s"
msgstr "la liste des ID de sessions doit suivre -s"

#: ps/parser.c:447
msgid "list of terminals (pty, tty...) must follow -t"
msgstr "la liste des terminaux (pty, tty…) doit suivre -t"

#: ps/parser.c:455
msgid "list of users must follow -u"
msgstr "la liste des utilisateurs doit suivre -u"

#: ps/parser.c:477
msgid "must set personality to get -x option"
msgstr "la personnalité doit être définie pour avoir l'option -x"

#: ps/parser.c:492
msgid "list of zones (contexts, labels, whatever?) must follow -z"
msgstr "la liste des zones (contextes, étiquettes, quoi d'autre ?) doit suivre -z"

#: ps/parser.c:499
msgid "embedded '-' among SysV options makes no sense"
msgstr "un « - » incrusté dans les options SysV n'a pas de sens"

#: ps/parser.c:505
msgid "unsupported SysV option"
msgstr "option SysV non supportée"

#: ps/parser.c:518
msgid "cannot happen - problem #1"
msgstr "ne peut se produire – problème #1"

#: ps/parser.c:522
msgid "cannot happen - problem #2"
msgstr "ne peut se produire – problème #2"

#: ps/parser.c:524
msgid "second chance parse failed, not BSD or SysV"
msgstr "l'analyse de la seconde chance a échoué: pas BSD ni SysV"

#: ps/parser.c:541
msgid "option A is reserved"
msgstr "l'option A est réservée"

#: ps/parser.c:546
msgid "option C is reserved"
msgstr "l'option C est réservée"

#: ps/parser.c:566
msgid "alternate System.map file must follow N"
msgstr "le fichier System.map alternatif doit suivre N"

#: ps/parser.c:572
msgid "format or sort specification must follow O"
msgstr "la spécification de format ou de tri doit suivre O"

#: ps/parser.c:597
msgid "list of users must follow U"
msgstr "la liste des utilisateurs doit suivre U"

#: ps/parser.c:609
msgid "obsolete W option not supported (you have a /dev/drum?)"
msgstr "l'option obsolète W n'est pas supportée (avez-vous un /dev/drum ?)"

#: ps/parser.c:645 ps/parser.c:903 ps/parser.c:912
msgid "only one heading option may be specified"
msgstr "une seule option d'en-tête peut être spécifiée"

#: ps/parser.c:660
msgid "long sort specification must follow 'k'"
msgstr "la spécification de tri long doit suivre « k »"

#: ps/parser.c:688
msgid "format specification must follow o"
msgstr "la spécification de format doit suivre o"

#: ps/parser.c:694
msgid "list of process IDs must follow p"
msgstr "la liste des ID de processus doit suivre p"

#: ps/parser.c:744
msgid "embedded '-' among BSD options makes no sense"
msgstr "un « - » incrusté dans les options BSD n'a pas de sens"

#: ps/parser.c:750
msgid "unsupported option (BSD syntax)"
msgstr "option non supportée (syntaxe BSD)"

#: ps/parser.c:835 ps/parser.c:847
msgid "unknown gnu long option"
msgstr "option longue gnu inconnue"

#: ps/parser.c:855
msgid "list of real groups must follow --Group"
msgstr "la liste des groupes réels doit suivre --Group"

#: ps/parser.c:863
msgid "list of real users must follow --User"
msgstr "la liste des utilisateurs réels doit suivre --User"

#: ps/parser.c:882
msgid "number of columns must follow --cols, --width, or --columns"
msgstr "le nombre de colonnes doit suivre --cols, --width ou --columns"

#: ps/parser.c:885
msgid "option --cumulative does not take an argument"
msgstr "l'option --cumulative ne prend pas d'argument"

#: ps/parser.c:890
msgid "option --deselect does not take an argument"
msgstr "l'option --deselect ne prend pas d'argument"

#: ps/parser.c:902
msgid "option --no-heading does not take an argument"
msgstr "l'option --no-heading ne prend pas d'argument"

#: ps/parser.c:911
msgid "option --heading does not take an argument"
msgstr "l'option --heading ne prend pas d'argument"

#: ps/parser.c:917
msgid "option --forest does not take an argument"
msgstr "l'option --forest ne prend pas d'argument"

#: ps/parser.c:923
msgid "format specification must follow --format"
msgstr "la spécification de format doit suivre --format"

#: ps/parser.c:929
msgid "list of effective groups must follow --group"
msgstr "la liste des groupes effectifs doit suivre --group"

#: ps/parser.c:947
msgid "list of process IDs must follow --pid"
msgstr "la liste des ID de processus doit suivre --pid"

#: ps/parser.c:955
msgid "list of process IDs must follow --ppid"
msgstr "la liste des ID de processus doit suivre --ppid"

#: ps/parser.c:973
msgid "number of rows must follow --rows or --lines"
msgstr "le nombre de lignes doit suivre --rows ou --lines"

#: ps/parser.c:977
msgid "some sid thing(s) must follow --sid"
msgstr "quelques choses sid doivent suivre --sid"

#: ps/parser.c:985
msgid "long sort specification must follow --sort"
msgstr "la spécification de tri longue doit suivre --sort"

#: ps/parser.c:991
msgid "list of ttys must follow --tty"
msgstr "la liste des tty doit suivre --tty"

#: ps/parser.c:999
msgid "list of effective users must follow --user"
msgstr "la liste des utilisateurs effectifs doit suivre --user"

#: ps/parser.c:1116
msgid "way bad"
msgstr "très mauvais"

#: ps/parser.c:1130
msgid "garbage option"
msgstr "option crasse"

#: ps/parser.c:1134
msgid "something broke"
msgstr "quelque chose de cassé"

#: ps/parser.c:1154
msgid "thread display conflicts with forest display"
msgstr "l'affichage par threads est en conflit avec l'affichage de type forêt"

#: ps/parser.c:1159
msgid "thread flags conflict; can't use H with m or -m"
msgstr "conflit dans les fanions de threads: H ne peut être utilisé avec m ou -m"

#: ps/parser.c:1161
msgid "thread flags conflict; can't use both m and -m"
msgstr "conflit dans les fanions de threads: m et -m ne peuvent être utilisés ensemble"

#: ps/parser.c:1163
msgid "thread flags conflict; can't use both -L and -T"
msgstr "conflit dans les fanions de threads: -L et -T ne peuvent être utilisés ensemble"

#: ps/parser.c:1237 ps/parser.c:1238
#, c-format
msgid "error: %s\n"
msgstr "erreur: %s\n"

#: ps/select.c:71
msgid "process selection options conflict"
msgstr "conflit dans les options de sélection des processus"

#: ps/sortformat.c:107 ps/sortformat.c:112
msgid "seriously crashing: goodbye cruel world"
msgstr "plantage sérieux: adieu monde cruel"

#: ps/sortformat.c:147
msgid "improper AIX field descriptor"
msgstr "descripteur de champ AIX incorrect"

#: ps/sortformat.c:168
msgid "unknown AIX field descriptor"
msgstr "descripteur de champ AIX inconnu"

#: ps/sortformat.c:173
msgid "AIX field descriptor processing bug"
msgstr "bug dans le traitement du descripteur de champ AIX"

#: ps/sortformat.c:290
#, c-format
msgid "unknown user-defined format specifier \"%s\""
msgstr "spécificateur de format défini par l'utilisateur « %s » inconnu"

#: ps/sortformat.c:316
msgid "empty format list"
msgstr "liste de format vide"

#: ps/sortformat.c:317
msgid "improper format list"
msgstr "liste de format incorrecte"

#: ps/sortformat.c:318
msgid "column widths must be unsigned decimal numbers"
msgstr "les largeurs de colonnes doivent être des nombres décimaux non signés"

#: ps/sortformat.c:319
msgid "can not set width for a macro (multi-column) format specifier"
msgstr "la largeur ne peut pas être définie pour une macro (multi colonne) de spécificateur de format"

#: ps/sortformat.c:372 ps/sortformat.c:388
msgid "improper sort list"
msgstr "liste de tri incorrecte"

#: ps/sortformat.c:383
msgid "empty sort list"
msgstr "liste de tri vide"

#: ps/sortformat.c:404 ps/sortformat.c:482 ps/sortformat.c:484
msgid "unknown sort specifier"
msgstr "spécificateur de tri inconnu"

#: ps/sortformat.c:431 ps/sortformat.c:442 ps/sortformat.c:448
msgid "bad sorting code"
msgstr "mauvais code de tri"

#: ps/sortformat.c:445
msgid "PPID sort and forest output conflict"
msgstr "conflit entre le tri de PPID et l'affichage de type forêt"

#: ps/sortformat.c:520
msgid "option -O can not follow other format options"
msgstr "l'option -O ne peut pas suivre d'autres options de format"

#: ps/sortformat.c:527 ps/sortformat.c:545
msgid "multiple sort options"
msgstr "options de tri multiples"

#: ps/sortformat.c:535
msgid "option O is neither first format nor sort order"
msgstr "l'option O n'est ni le premier format ni un ordre de tri"

#: ps/sortformat.c:662
msgid "modifier -y without format -l makes no sense"
msgstr "le modificateur -y sans le format -l n'a pas de sens"

#: ps/sortformat.c:765
msgid "bug: must reset the list first"
msgstr "bug: la liste doit être réinitialisée d'abord"

#: ps/sortformat.c:803
msgid "tell <procps@freelists.org> what you expected"
msgstr "dites à <procps@freelists.org> ce que vous attendiez"

#: ps/sortformat.c:813
msgid "tell <procps@freelists.org> what you want (-L/-T, -m/m/H, and $PS_FORMAT)"
msgstr "dites à <procps@freelists.org> ce que vous voulez (-L/-T, -m/m/H et $PS_FORMAT)"

#: ps/sortformat.c:830
#, c-format
msgid "warning: $PS_FORMAT ignored. (%s)\n"
msgstr "attention: $PS_FORMAT est ignoré. (%s)\n"

#: ps/sortformat.c:835 ps/sortformat.c:845
msgid "conflicting format options"
msgstr "options de format en conflit"

#: ps/sortformat.c:836
msgid "can not use output modifiers with user-defined output"
msgstr "un modificateur de sortie ne peut pas être utilisé avec une sortie définie par l'utilisateur"

#: ps/sortformat.c:837
msgid "-L/-T with H/m/-m and -o/-O/o/O is nonsense"
msgstr "-L/-T avec H/m/-m et -o/-O/o/O n'a pas de sens"

#: ps/sortformat.c:895
msgid "internal error: no PID or PPID for -j option"
msgstr "erreur interne: pas de PID ou de PPID pour l'option -j"

#: ps/sortformat.c:897
msgid "lost my PGID"
msgstr "j'ai perdu mon PGID"

#: ps/sortformat.c:910
msgid "internal error: no PRI for -c option"
msgstr "erreur interne: pas de PRI pour l'option -c"

#: ps/sortformat.c:913
msgid "lost my CLS"
msgstr "j'ai perdu mon CLS"

#: ps/sortformat.c:918
msgid "-T with H/-m/m but no PID for SPID to follow"
msgstr "-T avec H/-m/m mais aucun PID à suivre pour SPID"

#: ps/sortformat.c:929
msgid "-L with H/-m/m but no PID/PGID/SID/SESS for NLWP to follow"
msgstr "-L comme H/-m/m mais sans PID/PGID/SID/SESS à suivre pour NLWP"

#: pwdx.c:38
#, c-format
msgid " %s [options] pid...\n"
msgstr " %s [options] pid…\n"

#: pwdx.c:114
#, c-format
msgid "invalid process id: %s"
msgstr "ID de processus invalide: %s"

#: skill.c:185
#, c-format
msgid "cannot open file %s"
msgstr "impossible d'ouvrir le fichier %s"

#: skill.c:326
#, c-format
msgid " %s [options] <pid> [...]\n"
msgstr " %s [options] <pid> […]\n"

#: skill.c:328
msgid " <pid> [...]            send signal to every <pid> listed\n"
msgstr " <pid> […]              envoie le signal à chaque <pid> listé\n"

#: skill.c:329
msgid ""
" -<signal>, -s, --signal <signal>\n"
"                        specify the <signal> to be sent\n"
msgstr ""
" -<signal>, -s, --signal <signal>\n"
"                        spécifier le <signal> à envoyer\n"

#: skill.c:331
msgid " -l, --list=[<signal>]  list all signal names, or convert one to a name\n"
msgstr " -l, --list=[<signal>]  liste tous les noms de signaux ou en converti un en son nom\n"

#: skill.c:332
msgid " -L, --table            list all signal names in a nice table\n"
msgstr " -L, --table            liste tous les noms de signaux dans une belle table\n"

#: skill.c:347
#, c-format
msgid " %s [signal] [options] <expression>\n"
msgstr " %s [signal] [options] <expression>\n"

#: skill.c:351
#, c-format
msgid " %s [new priority] [options] <expression>\n"
msgstr " %s [nouvelle priorité] [options] <expression>\n"

#: skill.c:355
msgid " -f, --fast         fast mode (not implemented)\n"
msgstr " -f, --fast         mode rapide (pas encore disponible)\n"

#: skill.c:356
msgid " -i, --interactive  interactive\n"
msgstr " -i, --interactive  interactif\n"

#: skill.c:357
msgid " -l, --list         list all signal names\n"
msgstr " -l, --list         liste tous les noms de signaux\n"

#: skill.c:358
msgid " -L, --table        list all signal names in a nice table\n"
msgstr " -L, --table        liste tous les noms de signaux dans une belle table\n"

#: skill.c:359
msgid " -n, --no-action    do not actually kill processes; just print what would happen\n"
msgstr " -n, --no-action    ne tue pas réellement le processus. Affiche simplement ce qui va se passer\n"

#: skill.c:360
msgid " -v, --verbose      explain what is being done\n"
msgstr " -v, --verbose      explique ce qui est en train de se produire\n"

#: skill.c:361
msgid " -w, --warnings     enable warnings (not implemented)\n"
msgstr " -w, --warnings     active les avertissements (pas disponible)\n"

#: skill.c:363
msgid ""
"Expression can be: terminal, user, pid, command.\n"
"The options below may be used to ensure correct interpretation.\n"
msgstr ""
"L'expression peut être: terminal, user, pid, command.\n"
"Les options ci-dessous peuvent être utilisées pour assurer une interprétation correcte.\n"

#: skill.c:365
msgid " -c, --command <command>  expression is a command name\n"
msgstr " -c, --command <commande> l'expression est un nom de commande\n"

#: skill.c:366
msgid " -p, --pid <pid>          expression is a process id number\n"
msgstr " -p, --pid <pid>          l'expression est un numéro d'identification de processus\n"

#: skill.c:367
msgid " -t, --tty <tty>          expression is a terminal\n"
msgstr " -t, --tty <tty>          l'expression est un terminal\n"

#: skill.c:368
msgid " -u, --user <username>    expression is a username\n"
msgstr " -u, --user <nom_utilisateur> l'expression est un nom d'utilisateur\n"

#: skill.c:370
msgid "Alternatively, expression can be:\n"
msgstr "L'expression peut aussi être:\n"

#: skill.c:371
msgid ""
" --ns <pid>               match the processes that belong to the same\n"
"                          namespace as <pid>\n"
msgstr ""
" --ns <pid>               fait correspondre les processus qui appartiennent\n"
"                          au même espace de nom que <pid>\n"

#: skill.c:373
msgid ""
" --nslist <ns,...>        list which namespaces will be considered for\n"
"                          the --ns option; available namespaces are\n"
":                          ipc, mnt, net, pid, user, uts\n"
msgstr ""
" --nslist <en,…>          liste quels espaces de noms vont être pris en\n"
"                          considération par l'option --ns. Les espaces de noms\n"
"                          disponibles sont: ipc, mnt, net, pid, user, uts\n"

#: skill.c:383
#, c-format
msgid ""
"\n"
"The default signal is TERM. Use -l or -L to list available signals.\n"
"Particularly useful signals include HUP, INT, KILL, STOP, CONT, and 0.\n"
"Alternate signals may be specified in three ways: -SIGKILL -KILL -9\n"
msgstr ""
"\n"
"Le signal par défaut est TERM. Utilisez -l ou -L pour afficher les signaux\n"
"disponibles. Les signaux particulièrement utiles comprennent HUP, INT, KILL,\n"
"STOP, CONT et 0. Les signaux peuvent aussi être spécifiés de trois manières:\n"
"-SIGKILL -KILL -9\n"

#: skill.c:390
#, c-format
msgid ""
"\n"
"The default priority is +4. (snice +4 ...)\n"
"Priority numbers range from +20 (slowest) to -20 (fastest).\n"
"Negative priority numbers are restricted to administrative users.\n"
msgstr ""
"\n"
"La priorité par défaut est +4. (snice +4 …)\n"
"La priorité prend une valeur entre +20 (le plus bas) à -20 (le plus rapide).\n"
"Les priorités négatives sont accessibles aux seuls administrateurs.\n"

#: skill.c:462
#, c-format
msgid "unknown signal name %s"
msgstr "nom de signal %s inconnu"

#: skill.c:482
#, c-format
msgid "invalid argument %c"
msgstr "argument %c invalide"

#: skill.c:515
#, c-format
msgid "something at line %d\n"
msgstr "quelque chose à la ligne %d\n"

#: skill.c:538
#, c-format
msgid "priority %lu out of range"
msgstr "priorité %lu hors limites"

#: skill.c:651
#, c-format
msgid "invalid pid number %s"
msgstr "numéro de pid %s invalide"

#: skill.c:655
msgid "error reading reference namespace information"
msgstr "erreur lors de la lecture de l'information de l'espace de nom de référence"

#: skill.c:663
msgid "invalid namespace list"
msgstr "liste d'espace de noms invalide"

#: skill.c:701
msgid "no process selection criteria"
msgstr "aucun critère de sélection de processus"

#: skill.c:704
msgid "general flags may not be repeated"
msgstr "les fanions généraux ne peuvent pas être répétés"

#: skill.c:707
msgid "-i makes no sense with -v, -f, and -n"
msgstr "-i n'a pas de sens avec -v, -f et -n"

#: skill.c:709
msgid "-v makes no sense with -i and -f"
msgstr "-v n'a pas de sens avec -i et -f"

#: skill.c:754
#, c-format
msgid "skill: \"%s\" is not support\n"
msgstr "compétence: « %s » n'est pas supporté\n"

#: slabtop.c:191
msgid " -d, --delay <secs>  delay updates\n"
msgstr " -d, --delay <secs>  délai des mises à jour\n"

#: slabtop.c:192
msgid " -o, --once          only display once, then exit\n"
msgstr " -o, --once          n'affiche qu'une seule fois puis arrête\n"

#: slabtop.c:193
msgid " -s, --sort <char>   specify sort criteria by character (see below)\n"
msgstr " -s, --sort <car>    spécifie le critère de tri par caractère (voir plus bas)\n"

#: slabtop.c:198
msgid ""
"\n"
"The following are valid sort criteria:\n"
msgstr ""
"\n"
"Voici les critères de tri acceptés:\n"

#: slabtop.c:199
msgid " a: sort by number of active objects\n"
msgstr " a: trie selon le nombre d'objets actifs\n"

#: slabtop.c:200
msgid " b: sort by objects per slab\n"
msgstr " b: trie selon les objets dans le slab\n"

#: slabtop.c:201
msgid " c: sort by cache size\n"
msgstr " c: trie selon la taille de la cache\n"

#: slabtop.c:202
msgid " l: sort by number of slabs\n"
msgstr " l: trie selon le nombre de slabs\n"

#: slabtop.c:203
msgid " v: sort by number of active slabs\n"
msgstr " v: trie selon le nombre de slabs actives\n"

#: slabtop.c:204
msgid " n: sort by name\n"
msgstr " n: trie par nom\n"

#: slabtop.c:205
msgid " o: sort by number of objects (the default)\n"
msgstr " o: tri selon le nombre d'objets (choix par défaut)\n"

#: slabtop.c:206
msgid " p: sort by pages per slab\n"
msgstr " p: trie selon les pages par slab\n"

#: slabtop.c:207
msgid " s: sort by object size\n"
msgstr " s: trie par taille d'objet\n"

#: slabtop.c:208
msgid " u: sort by cache utilization\n"
msgstr " u: trie selon l'utilisation de la cache\n"

#: slabtop.c:317
msgid "illegal delay"
msgstr "délai illégal"

#: slabtop.c:320 tload.c:135 vmstat.c:962
msgid "delay must be positive integer"
msgstr "le délai doit être un nombre entier positif"

#: slabtop.c:341
msgid "terminal setting retrieval"
msgstr "récupération des paramètres du terminal"

#. Translation Hint: Next five strings must not
#. * exceed 35 length in characters.
#: slabtop.c:379
#, c-format
msgid "Active / Total Objects (% used)"
msgstr "Actif / Total Objets (% utilisé)"

#: slabtop.c:382
#, c-format
msgid "Active / Total Slabs (% used)"
msgstr "Actif / Total Slabs (% utilisé)"

#: slabtop.c:385
#, c-format
msgid "Active / Total Caches (% used)"
msgstr "Actif / Total Caches (% utilisé)"

#: slabtop.c:388
#, c-format
msgid "Active / Total Size (% used)"
msgstr "Actif / Taille Totale (% utilisé)"

#: slabtop.c:391
msgid "Minimum / Average / Maximum Object"
msgstr "Minimum / Moyenne / Maximum (Objet)"

#. Translation Hint: Please keep alignment of the
#. * following intact.
#: slabtop.c:400
msgid "  OBJS ACTIVE  USE OBJ SIZE  SLABS OBJ/SLAB CACHE SIZE NAME"
msgstr "  OBJS ACTIF  UTIL OBJ DIM   SLABS OBJ/SLAB CACHE DIM  NOM"

#: sysctl.c:86
#, c-format
msgid "separators should not be repeated: %s"
msgstr "les séparateurs ne devraient pas être répétés: %s"

#: sysctl.c:105
#, c-format
msgid " %s [options] [variable[=value] ...]\n"
msgstr " %s [options] [variable[=valeur] …]\n"

#: sysctl.c:108
msgid "  -a, --all            display all variables\n"
msgstr "  -a, --all            affiche toutes les variables\n"

#: sysctl.c:109
msgid "  -A                   alias of -a\n"
msgstr "  -A                   synonyme de -a\n"

#: sysctl.c:110
msgid "  -X                   alias of -a\n"
msgstr "  -X                   synonyme de -a\n"

#: sysctl.c:111
msgid "      --deprecated     include deprecated parameters to listing\n"
msgstr "      --deprecated     inclus les paramètres dépréciés dans la liste\n"

#: sysctl.c:112
msgid "  -b, --binary         print value without new line\n"
msgstr "  -b, --binary         affiche la valeur sans retour à la ligne\n"

#: sysctl.c:113
msgid "  -e, --ignore         ignore unknown variables errors\n"
msgstr "  -e, --ignore         ignore les erreurs des variables inconnues\n"

#: sysctl.c:114
msgid "  -N, --names          print variable names without values\n"
msgstr "  -N, --names          affiche les noms des variables sans les valeurs\n"

#: sysctl.c:115
msgid "  -n, --values         print only values of a variables\n"
msgstr "  -n, --values         affiche uniquement les valeurs des variables\n"

#: sysctl.c:116
msgid "  -p, --load[=<file>]  read values from file\n"
msgstr ""
"  -p, --load[=<fichier>]\n"
"                       lis les valeurs dans le fichier\n"

#: sysctl.c:117
msgid "  -f                   alias of -p\n"
msgstr "  -f                   synonyme de -p\n"

#: sysctl.c:118
msgid "      --system         read values from all system directories\n"
msgstr "      --system         lis les valeurs depuis tous les répertoires systèmes\n"

#: sysctl.c:119
msgid ""
"  -r, --pattern <expression>\n"
"                       select setting that match expression\n"
msgstr ""
"  -r, --pattern <expression>\n"
"                       sélectionne les paramètres qui correspondent à l'expression\n"

#: sysctl.c:121
msgid "  -q, --quiet          do not echo variable set\n"
msgstr "  -q, --quiet          ne répète pas la variable changée\n"

#: sysctl.c:122
msgid "  -w, --write          enable writing a value to variable\n"
msgstr "  -w, --write          active l'écriture d'une valeur dans la variable\n"

#: sysctl.c:123
msgid "  -o                   does nothing\n"
msgstr "  -o                   ne fait rien\n"

#: sysctl.c:124
msgid "  -x                   does nothing\n"
msgstr "  -x                   ne fait rien\n"

#: sysctl.c:125
msgid "  -d                   alias of -h\n"
msgstr "  -d                   synonyme de -h\n"

#: sysctl.c:171 sysctl.c:222 sysctl.c:431
#, c-format
msgid "\"%s\" is an unknown key"
msgstr "« %s » est une clé inconnue"

#: sysctl.c:194 sysctl.c:333 sysctl.c:409
#, c-format
msgid "cannot stat %s"
msgstr "impossible d'obtenir les stat de %s"

#: sysctl.c:227 sysctl.c:265 sysctl.c:436
#, c-format
msgid "permission denied on key '%s'"
msgstr "permission refusée sur la clé « %s »"

#: sysctl.c:231 sysctl.c:279
#, c-format
msgid "reading key \"%s\""
msgstr "lecture de la clé « %s »"

#: sysctl.c:317
#, c-format
msgid "unable to open directory \"%s\""
msgstr "impossible d'ouvrir le répertoire « %s »"

#: sysctl.c:374
#, c-format
msgid "\"%s\" must be of the form name=value"
msgstr "« %s » doit être au format nom=valeur"

#: sysctl.c:383
#, c-format
msgid "malformed setting \"%s\""
msgstr "paramètre malformé « %s »"

#: sysctl.c:403
#, c-format
msgid "%s is deprecated, value not set"
msgstr "%s est déprécié, valeur pas changée"

#: sysctl.c:416 sysctl.c:421 sysctl.c:440 sysctl.c:449
#, c-format
msgid "setting key \"%s\""
msgstr "change la clé « %s »"

#: sysctl.c:505
msgid "glob failed"
msgstr "glob a échoué"

#: sysctl.c:511
#, c-format
msgid "cannot open \"%s\""
msgstr "impossible d'ouvrir « %s »"

#: sysctl.c:527 sysctl.c:539
#, c-format
msgid "%s(%d): invalid syntax, continuing..."
msgstr "%s(%d): erreur de syntaxe, je continue…"

#: sysctl.c:638 sysctl.c:645
#, c-format
msgid "* Applying %s ...\n"
msgstr "* Applique %s …\n"

#: sysctl.c:795
#, c-format
msgid ""
"no variables specified\n"
"Try `%s --help' for more information."
msgstr ""
"pas de variable spécifiée\n"
"Essayez « %s --help » pour plus d'informations."

#: sysctl.c:799
#, c-format
msgid ""
"options -N and -q cannot coexist\n"
"Try `%s --help' for more information."
msgstr ""
"les options -N et -q ne peuvent pas coexister\n"
"Essayez « %s --help » pour plus d'informations."

#: tload.c:89
#, c-format
msgid " %s [options] [tty]\n"
msgstr " %s [options] [tty]\n"

#: tload.c:91
msgid " -d, --delay <secs>  update delay in seconds\n"
msgstr " -d, --delay <secs>  délai de mise à jour en secondes\n"

#: tload.c:92
msgid " -s, --scale <num>   vertical scale\n"
msgstr " -s, --scale <num>   échelle verticale\n"

#: tload.c:130
msgid "scale cannot be negative"
msgstr "l'échelle ne peut pas être négative"

#: tload.c:137 vmstat.c:964
msgid "too large delay value"
msgstr "valeur de délai trop grande"

#: tload.c:152
msgid "can not open tty"
msgstr "le tty ne peut être ouvert"

#: tload.c:213 tload.c:215
msgid "writing to tty failed"
msgstr "l'écriture dans le tty a échoué"

#. Translation Notes ------------------------------------------------
#. .  It is strongly recommend that the --no-wrap command line option
#. .  be used with all supporting translation tools, when available.
#. .
#. .  The following line pairs contain only plain text and consist of:
#. .     1) a field name/column header - mostly upper case
#. .     2) the related description    - both upper and lower case
#. .
#. .  To avoid truncation at runtime, each column header is noted with
#. .  its maximum size and the following description must not exceed
#. .  20 characters.  Fewer characters are ok.
#. .
#. .
#. Translation Hint: maximum 'PID' = 5
#: top/top_nls.c:124
msgid "PID"
msgstr "PID"

#: top/top_nls.c:125
msgid "Process Id"
msgstr "ID processus"

#. Translation Hint: maximum 'PPID' = 5
#: top/top_nls.c:127
msgid "PPID"
msgstr "PPID"

#: top/top_nls.c:128
msgid "Parent Process pid"
msgstr "ID processus parent"

#. Translation Hint: maximum 'UID' = 5
#: top/top_nls.c:130
msgid "UID"
msgstr "UID"

#: top/top_nls.c:131
msgid "Effective User Id"
msgstr "ID util. effectif"

#. Translation Hint: maximum 'USER' = 8
#: top/top_nls.c:133 w.c:586
msgid "USER"
msgstr "UTIL."

#: top/top_nls.c:134
msgid "Effective User Name"
msgstr "Nom util. effectif"

#. Translation Hint: maximum 'RUID' = 5
#: top/top_nls.c:136
msgid "RUID"
msgstr "RUID"

#: top/top_nls.c:137
msgid "Real User Id"
msgstr "ID util. réel"

#. Translation Hint: maximum 'RUSER' = 8
#: top/top_nls.c:139
msgid "RUSER"
msgstr "RUSER"

#: top/top_nls.c:140
msgid "Real User Name"
msgstr "Nom util. réel"

#. Translation Hint: maximum 'SUID' = 5
#: top/top_nls.c:142
msgid "SUID"
msgstr "SUID"

#: top/top_nls.c:143
msgid "Saved User Id"
msgstr "ID util. sauvé"

#. Translation Hint: maximum 'SUSER' = 8
#: top/top_nls.c:145
msgid "SUSER"
msgstr "SUSER"

#: top/top_nls.c:146
msgid "Saved User Name"
msgstr "Nom util. sauvé"

#. Translation Hint: maximum 'GID' = 5
#: top/top_nls.c:148
msgid "GID"
msgstr "GID"

#: top/top_nls.c:149
msgid "Group Id"
msgstr "ID groupe"

#. Translation Hint: maximum 'GROUP' = 8
#: top/top_nls.c:151
msgid "GROUP"
msgstr "GROUPE"

#: top/top_nls.c:152
msgid "Group Name"
msgstr "Nom groupe"

#. Translation Hint: maximum 'PGRP' = 5
#: top/top_nls.c:154
msgid "PGRP"
msgstr "PGRP"

#: top/top_nls.c:155
msgid "Process Group Id"
msgstr "ID groupe proc."

#. Translation Hint: maximum 'TTY' = 8
#: top/top_nls.c:157
msgid "TTY"
msgstr "TTY"

#: top/top_nls.c:158
msgid "Controlling Tty"
msgstr "TTY contrôlant"

#. Translation Hint: maximum 'TPGID' = 5
#: top/top_nls.c:160
msgid "TPGID"
msgstr "TPGID"

#: top/top_nls.c:161
msgid "Tty Process Grp Id"
msgstr "ID grp tty proc."

#. Translation Hint: maximum 'SID' = 5
#: top/top_nls.c:163
msgid "SID"
msgstr "SID"

#: top/top_nls.c:164
msgid "Session Id"
msgstr "ID session"

#. Translation Hint: maximum 'PR' = 3
#: top/top_nls.c:166
msgid "PR"
msgstr "PR"

#: top/top_nls.c:167
msgid "Priority"
msgstr "Priorité"

#. Translation Hint: maximum 'NI' = 3
#: top/top_nls.c:169
msgid "NI"
msgstr "NI"

#: top/top_nls.c:170
msgid "Nice Value"
msgstr "Politesse"

#. Translation Hint: maximum 'nTH' = 3
#: top/top_nls.c:172
msgid "nTH"
msgstr "nTH"

#: top/top_nls.c:173
msgid "Number of Threads"
msgstr "Nombre de threads"

#. Translation Hint: maximum 'P' = 1
#: top/top_nls.c:175
msgid "P"
msgstr "P"

#: top/top_nls.c:176
msgid "Last Used Cpu (SMP)"
msgstr "Dernier CPU utilisé"

#. Translation Hint: maximum '%CPU' = 4
#: top/top_nls.c:178
#, c-format
msgid "%CPU"
msgstr "%CPU"

#: top/top_nls.c:179
msgid "CPU Usage"
msgstr "Util. CPU"

#. Translation Hint: maximum '' = 6
#: top/top_nls.c:181
msgid "TIME"
msgstr "TEMPS"

#: top/top_nls.c:182
msgid "CPU Time"
msgstr "Temps CPU"

#. Translation Hint: maximum 'TIME+' = 9
#: top/top_nls.c:184
msgid "TIME+"
msgstr "TEMPS+"

#: top/top_nls.c:185
msgid "CPU Time, hundredths"
msgstr "Temps CPU (centièmes)"

#. Translation Hint: maximum '%MEM' = 4
#: top/top_nls.c:187
msgid "%MEM"
msgstr "%MEM"

#: top/top_nls.c:188
msgid "Memory Usage (RES)"
msgstr "Util. mémoire (RES)"

#. Translation Hint: maximum 'VIRT' = 5
#: top/top_nls.c:190
msgid "VIRT"
msgstr "VIRT"

#: top/top_nls.c:191
msgid "Virtual Image (KiB)"
msgstr "Image virtuelle (Kio)"

#. Translation Hint: maximum 'SWAP' = 4
#: top/top_nls.c:193
msgid "SWAP"
msgstr "ÉCH."

#: top/top_nls.c:194
msgid "Swapped Size (KiB)"
msgstr "Taille écrite dans la partition d'échange (Kio)"

#. Translation Hint: maximum 'RES' = 4
#: top/top_nls.c:196
msgid "RES"
msgstr "RES"

#: top/top_nls.c:197
msgid "Resident Size (KiB)"
msgstr "Taille résid. (Kio)"

#. Translation Hint: maximum 'CODE' = 4
#: top/top_nls.c:199
msgid "CODE"
msgstr "CODE"

#: top/top_nls.c:200
msgid "Code Size (KiB)"
msgstr "Taille code (Kio)"

#. Translation Hint: maximum 'DATA' = 4
#: top/top_nls.c:202
msgid "DATA"
msgstr "DATA"

#: top/top_nls.c:203
msgid "Data+Stack (KiB)"
msgstr "Data+pile (Kio)"

#. Translation Hint: maximum 'SHR' = 4
#: top/top_nls.c:205
msgid "SHR"
msgstr "SHR"

#: top/top_nls.c:206
msgid "Shared Memory (KiB)"
msgstr "Mem partagée (Kio)"

#. Translation Hint: maximum 'nMaj' = 4
#: top/top_nls.c:208
msgid "nMaj"
msgstr "nMaj"

#: top/top_nls.c:209
msgid "Major Page Faults"
msgstr "Fautes page majeurs"

#. Translation Hint: maximum 'nMin' = 4
#: top/top_nls.c:211
msgid "nMin"
msgstr "nMin"

#: top/top_nls.c:212
msgid "Minor Page Faults"
msgstr "Fautes page mineurs"

#. Translation Hint: maximum 'nDRT' = 4
#: top/top_nls.c:214
msgid "nDRT"
msgstr "nDRT"

#: top/top_nls.c:215
msgid "Dirty Pages Count"
msgstr "Pages modifiées"

#. Translation Hint: maximum 'S' = 1
#: top/top_nls.c:217
msgid "S"
msgstr "S"

#: top/top_nls.c:218
msgid "Process Status"
msgstr "Statut processus"

#. Translation Hint: maximum 'COMMAND' = 7
#: top/top_nls.c:220
msgid "COMMAND"
msgstr "COM."

#: top/top_nls.c:221
msgid "Command Name/Line"
msgstr "Nom/ligne commande"

#. Translation Hint: maximum 'WCHAN' = 7
#: top/top_nls.c:223
msgid "WCHAN"
msgstr "WCHAN"

#: top/top_nls.c:224
msgid "Sleeping in Function"
msgstr "Dors dans fonction"

#. Translation Hint: maximum 'Flags' = 8
#: top/top_nls.c:226
msgid "Flags"
msgstr "Fanions"

#: top/top_nls.c:227
msgid "Task Flags <sched.h>"
msgstr "Fanions tâche <sched.h>"

#. Translation Hint: maximum 'CGROUPS' = 7
#: top/top_nls.c:229
msgid "CGROUPS"
msgstr "CGROUPS"

#: top/top_nls.c:230
msgid "Control Groups"
msgstr "Groups contrôle"

#. Translation Hint: maximum 'SUPGIDS' = 7
#: top/top_nls.c:232
msgid "SUPGIDS"
msgstr "SUPGIDS"

#: top/top_nls.c:233
msgid "Supp Groups IDs"
msgstr "ID groups sup"

#. Translation Hint: maximum 'SUPGRPS' = 7
#: top/top_nls.c:235
msgid "SUPGRPS"
msgstr "SUPGRPS"

#: top/top_nls.c:236
msgid "Supp Groups Names"
msgstr "Noms groups sup"

#. Translation Hint: maximum 'TGID' = 5
#: top/top_nls.c:238
msgid "TGID"
msgstr "TGID"

#: top/top_nls.c:239
msgid "Thread Group Id"
msgstr "ID group thread"

#. Translation Hint: maximum 'Adj' = 3
#: top/top_nls.c:242
msgid "Adj"
msgstr "Adj"

#: top/top_nls.c:243
msgid "oom_adjustment (2^X)"
msgstr "oom_adjustment (2^X)"

# Quel terme utiliser pour désigner la probabilité que le process soit éliminé par le OOM killer ?
#. Translation Hint: maximum 'Badness' = 8
#: top/top_nls.c:245
msgid "Badness"
msgstr ""

#: top/top_nls.c:246
msgid "oom_score (badness)"
msgstr "oom_score (badness)"

#. Translation Hint: maximum 'ENVIRON' = 7
#: top/top_nls.c:249
msgid "ENVIRON"
msgstr "ENVIRON"

#. Translation Hint: the abbreviation 'vars' below is shorthand for
#. 'variables'
#: top/top_nls.c:252
msgid "Environment vars"
msgstr "Var. d'environnement"

#. Translation Hint: maximum 'vMj' = 3
#: top/top_nls.c:254
msgid "vMj"
msgstr "vMj"

#: top/top_nls.c:255
msgid "Major Faults delta"
msgstr "Delta fautes maj"

#. Translation Hint: maximum 'vMn' = 3
#: top/top_nls.c:257
msgid "vMn"
msgstr "vMn"

#: top/top_nls.c:258
msgid "Minor Faults delta"
msgstr "Delta fautes min"

#. Translation Hint: maximum 'USED' = 4
#: top/top_nls.c:260
msgid "USED"
msgstr "UTIL"

#: top/top_nls.c:261
msgid "Res+Swap Size (KiB)"
msgstr "Taille res+éch (Kio)"

#. Translation Hint: maximum 'nsIPC' = 10
#: top/top_nls.c:263
msgid "nsIPC"
msgstr "nsIPC"

#: top/top_nls.c:264
msgid "IPC namespace Inode"
msgstr "Inode esp nom IPC"

#. Translation Hint: maximum 'nsMNT' = 10
#: top/top_nls.c:266
msgid "nsMNT"
msgstr "nsMNT"

#: top/top_nls.c:267
msgid "MNT namespace Inode"
msgstr "Inode esp nom MNT"

#. Translation Hint: maximum 'nsNET' = 10
#: top/top_nls.c:269
msgid "nsNET"
msgstr "nsNET"

#: top/top_nls.c:270
msgid "NET namespace Inode"
msgstr "Inode esp nom NET"

#. Translation Hint: maximum 'nsPID' = 10
#: top/top_nls.c:272
msgid "nsPID"
msgstr "nsPID"

#: top/top_nls.c:273
msgid "PID namespace Inode"
msgstr "Inode esp nom PID"

#. Translation Hint: maximum 'nsUSER' = 10
#: top/top_nls.c:275
msgid "nsUSER"
msgstr "nsUSER"

#: top/top_nls.c:276
msgid "USER namespace Inode"
msgstr "Inode esp nom USER"

#. Translation Hint: maximum 'nsUTS' = 10
#: top/top_nls.c:278
msgid "nsUTS"
msgstr "nsUTS"

#: top/top_nls.c:279
msgid "UTS namespace Inode"
msgstr "Inode esp nom UTS"

#. Translation Notes ------------------------------------------------
#. .  It is strongly recommend that the --no-wrap command line option
#. .  be used with all supporting translation tools, when available.
#. .
#. .  This group of lines contains both plain text and c-format strings.
#. .
#. .  Some strings reflect switches used to affect the running program
#. .  and should not be translated without also making corresponding
#. .  c-code logic changes.
#. .
#: top/top_nls.c:299
#, c-format
msgid ""
"\tsignal %d (%s) was caught by %s, please\n"
"\tsee http://www.debian.org/Bugs/Reporting\n"
msgstr ""
"\tle signal %d (%s) a été intercepté par %s, veuillez\n"
"\tconsulter http://www.debian.org/Bugs/Reporting\n"

#: top/top_nls.c:302
#, c-format
msgid ""
"inappropriate '%s'\n"
"Usage:\n"
"  %s%s"
msgstr ""
"« %s » inapproprié\n"
"Usage:\n"
"  %s%s"

#: top/top_nls.c:305
#, c-format
msgid ""
"  %s\n"
"Usage:\n"
"  %s%s"
msgstr ""
"  %s\n"
"Usage:\n"
"  %s%s"

#: top/top_nls.c:308
#, c-format
msgid "failed /proc/stat open: %s"
msgstr "échec à l'ouverture de /proc/stat: %s"

#: top/top_nls.c:309
#, c-format
msgid "failed openproc: %s"
msgstr "échec de openproc: %s"

#: top/top_nls.c:310
#, c-format
msgid "bad delay interval '%s'"
msgstr "mauvais intervalle de délai « %s »"

#: top/top_nls.c:311
#, c-format
msgid "bad iterations argument '%s'"
msgstr "mauvais argument d'interactions « %s »"

#: top/top_nls.c:312
#, c-format
msgid "pid limit (%d) exceeded"
msgstr "limite de pid (%d) dépassée"

#: top/top_nls.c:313
#, c-format
msgid "bad pid '%s'"
msgstr "mauvais pid « %s »"

#: top/top_nls.c:314
#, c-format
msgid "-%c requires argument"
msgstr "-%c exige un paramètre"

#: top/top_nls.c:315
#, c-format
msgid "bad width arg '%s', must > %d"
msgstr "mauvais param de largeur « %s » (doit être > à %d)"

#: top/top_nls.c:316
#, c-format
msgid ""
"unknown option '%c'\n"
"Usage:\n"
"  %s%s"
msgstr ""
"option « %c » inconnue\n"
"Usage:\n"
"  %s%s"

#: top/top_nls.c:319
msgid "-d disallowed in \"secure\" mode"
msgstr "-d interdit en mode « sure »"

#: top/top_nls.c:320
msgid "-d requires positive argument"
msgstr "-d requiert un paramètre positif"

#: top/top_nls.c:321
msgid "On"
msgstr "On"

#: top/top_nls.c:322
msgid "Off"
msgstr "Off"

#. Translation Hint: Only the following words should be translated
#. .                 secs (seconds), max (maximum), user, field, cols (columns)
#: top/top_nls.c:325
msgid " -hv | -bcHiOSs -d secs -n max -u|U user -p pid(s) -o field -w [cols]"
msgstr " -hv | -bcHiOSs -d sec -n max -u|U util -p pid(s) -o champ -w [col]"

#: top/top_nls.c:326
msgid "failed /proc/stat read"
msgstr "échec lors de la lecture de /proc/stat"

#: top/top_nls.c:327
#, c-format
msgid "Forest mode %s"
msgstr "Mode forêt %s"

#: top/top_nls.c:328
msgid "failed tty get"
msgstr "échec de get sur le tty"

#: top/top_nls.c:329
#, c-format
msgid "failed tty set: %s"
msgstr "échec de set sur le tty: %s"

#: top/top_nls.c:330
msgid "Choose field group (1 - 4)"
msgstr "Choisissez le groupe du champ (1 à 4)"

#: top/top_nls.c:331
msgid "Command disabled, 'A' mode required"
msgstr "Commande désactivée, mode « A » requis"

#: top/top_nls.c:332
#, c-format
msgid "Command disabled, activate %s with '-' or '_'"
msgstr "Commande désactivée, activez %s avec « - » ou « _ »"

#: top/top_nls.c:333
msgid "No colors to map!"
msgstr "Pas de couleur dans la correspondance !"

#: top/top_nls.c:334
#, c-format
msgid "Failed '%s' open: %s"
msgstr "Échec à l'ouverture de « %s »: %s"

#: top/top_nls.c:335
#, c-format
msgid "Wrote configuration to '%s'"
msgstr "Configuration écrite dans  « %s »"

#: top/top_nls.c:336
#, c-format
msgid "Change delay from %.1f to"
msgstr "Change le délai de %.1f à"

#: top/top_nls.c:337
#, c-format
msgid "Show threads %s"
msgstr "Montre les threads %s"

#: top/top_nls.c:338
#, c-format
msgid "Irix mode %s"
msgstr "Mode Irix %s"

#: top/top_nls.c:339
#, c-format
msgid "PID to signal/kill [default pid = %d]"
msgstr "PID à signaler/tuer [pid par défaut = %d]"

#: top/top_nls.c:340
#, c-format
msgid "Send pid %d signal [%d/sigterm]"
msgstr "Envoyer au pid %d le signal [%d/sigterm]"

#: top/top_nls.c:341
#, c-format
msgid "Failed signal pid '%d' with '%d': %s"
msgstr "Échec à l'envoi du signal « %2$d » au pid « %1$d »: %3$s"

#: top/top_nls.c:342
msgid "Invalid signal"
msgstr "Signal invalide"

#: top/top_nls.c:343
#, c-format
msgid "PID to renice [default pid = %d]"
msgstr "PID dont la courtoisie va changer [pid par défaut = %d]"

#: top/top_nls.c:344
#, c-format
msgid "Renice PID %d to value"
msgstr "Change la courtoisie du PID %d à la valeur"

#: top/top_nls.c:345
#, c-format
msgid "Failed renice of PID %d to %d: %s"
msgstr "La courtoisie du PID %d n'a pas pu être mise à %d: %s"

#: top/top_nls.c:346
#, c-format
msgid "Rename window '%s' to (1-3 chars)"
msgstr "Renomme la fenêtre « %s » en (1-3 caractères)"

#: top/top_nls.c:347
#, c-format
msgid "Cumulative time %s"
msgstr "Temps cumulé %s"

#: top/top_nls.c:348
#, c-format
msgid "Maximum tasks = %d, change to (0 is unlimited)"
msgstr "Tâches maximum = %d, change en (0 pour illimité)"

#: top/top_nls.c:349
msgid "Invalid maximum"
msgstr "Maximum invalide"

#: top/top_nls.c:350
msgid "Nothing to highlight!"
msgstr "Rien à mettre en évidence !"

#: top/top_nls.c:351
msgid "Which user (blank for all)"
msgstr "Quel utilisateur (vide pour tous)"

#: top/top_nls.c:352
msgid "Unknown command - try 'h' for help"
msgstr "Commande inconnue – essayez « h » pour l'aide"

#: top/top_nls.c:353
#, c-format
msgid "scroll coordinates: y = %d/%%d (tasks), x = %d/%d (fields)"
msgstr "coordonnées de défilement: y= %d/%%d (tâches), x = %d/%d (champs)"

#: top/top_nls.c:354
msgid "failed memory allocate"
msgstr "échec de l'allocation de mémoire"

#: top/top_nls.c:355
msgid "failed memory re-allocate"
msgstr "échec de la ré-allocation de mémoire"

#: top/top_nls.c:356
msgid "Unacceptable floating point"
msgstr "Nombre décimal inacceptable"

#: top/top_nls.c:357
msgid "Invalid user"
msgstr "Utilisateur invalide"

#: top/top_nls.c:358
msgid "forest view"
msgstr "vue forêt"

#: top/top_nls.c:359
msgid "failed pid maximum size test"
msgstr "le test du pid maximum a échoué"

#: top/top_nls.c:360
msgid "failed number of cpus test"
msgstr "le test du nombre de CPU a échoué"

#: top/top_nls.c:361
#, c-format
msgid "incompatible rcfile, you should delete '%s'"
msgstr "fichier rcfile incompatible, vous devriez effacer « %s »"

#: top/top_nls.c:362
#, c-format
msgid "window entry #%d corrupt, please delete '%s'"
msgstr "l'entrée de fenêtre #%d est corrompue, veuillez effacer « %s »"

#: top/top_nls.c:363
msgid "Unavailable in secure mode"
msgstr "Non disponible en mode sécurisé"

#: top/top_nls.c:364
msgid "Only 1 cpu detected"
msgstr "Seulement 1 CPU détecté"

#: top/top_nls.c:365
msgid "Unacceptable integer"
msgstr "Nombre entier inacceptable"

#: top/top_nls.c:366
msgid "conflicting process selections (U/p/u)"
msgstr "sélections de processus conflictuelles (U/p/u)"

#. Translation Hint: This is an abbreviation (limit 3 characters) for:
#. .                 kibibytes (1024 bytes)
#: top/top_nls.c:369
msgid "KiB"
msgstr "KiB"

#. Translation Hint: This is an abbreviation (limit 3 characters) for:
#. .                 mebibytes (1,048,576 bytes)
#: top/top_nls.c:372
msgid "MiB"
msgstr "MiB"

#. Translation Hint: This is an abbreviation (limit 3 characters) for:
#. .                 gibibytes (1,073,741,824 bytes)
#: top/top_nls.c:375
msgid "GiB"
msgstr "GiB"

#. Translation Hint: This is an abbreviation (limit 3 characters) for:
#. .                 tebibytes (1,099,511,627,776 bytes)
#: top/top_nls.c:378
msgid "TiB"
msgstr "TiB"

#. Translation Hint: This is an abbreviation (limit 3 characters) for:
#. .                 pebibytes (1,024 tebibytes)
#: top/top_nls.c:381
msgid "PiB"
msgstr "PiB"

#. Translation Hint: This is an abbreviation (limit 3 characters) for:
#. .                 exbibytes (1,024 pebibytes)
#: top/top_nls.c:384
msgid "EiB"
msgstr "EiB"

#: top/top_nls.c:385
msgid "Threads"
msgstr "Threads"

#: top/top_nls.c:386
msgid "Tasks"
msgstr "Tâches"

#. Translation Hint: The following "word" is meant to represent either a single
#. .                 cpu or all of the processors in a multi-processor computer
#. .                 (should be exactly 6 characters, not counting the colon)
#: top/top_nls.c:390
msgid "Cpu(s):"
msgstr "Cpu(s):"

#. Translation Hint: The following "word" is meant to represent a single processor
#. .                 (should be exactly 3 characters)
#: top/top_nls.c:393
#, c-format
msgid "Cpu%-3d:"
msgstr "Cpu%-3d:"

#. Translation Hint: The following word "another" must have 1 trailing space
#: top/top_nls.c:395
msgid "another "
msgstr "autre "

#: top/top_nls.c:396
msgid "Locate next inactive, use \"L\""
msgstr "Trouve le suivant inactif, utilisez « L »"

#: top/top_nls.c:397
msgid "Locate string"
msgstr "Trouve chaîne"

#: top/top_nls.c:398
#, c-format
msgid "%s\"%s\" not found"
msgstr "%s« %s » pas trouvé"

#: top/top_nls.c:399
#, c-format
msgid "width incr is %d, change to (0 default, -1 auto)"
msgstr "largeur incr est %d, change à (0 défaut, -1 auto)"

#: top/top_nls.c:400
msgid "Overwrite existing obsolete/corrupted rcfile?"
msgstr "Écraser le fichier rcfile existant qui est obsolète ou corrompu ?"

#: top/top_nls.c:401
#, c-format
msgid "unrecognized field name '%s'"
msgstr "nom de champ « %s » non reconnu"

#: top/top_nls.c:402
msgid "even using field names only, window is now too small"
msgstr "même en n'utilisant que les noms de champs, la fenêtre est maintenant trop petite"

#: top/top_nls.c:404
msgid "Open Files"
msgstr "Ouvrir fichiers"

#: top/top_nls.c:405
msgid "NUMA Info"
msgstr "Info NUMA"

#: top/top_nls.c:406
msgid "Log"
msgstr "Journal"

#: top/top_nls.c:407
msgid "the '=' key will eventually show the actual file read or command(s) excuted ..."
msgstr "la touche « = » montera le fichier réellement lu ou la/les commande(s) exécutée(s)…"

#: top/top_nls.c:408
msgid "demo"
msgstr "démo"

#: top/top_nls.c:409
#, c-format
msgid ""
"This is simulated output representing the contents of some file or the output\n"
"from some command.  Exactly which commands and/or files are solely up to you.\n"
"\n"
"Although this text is for information purposes only, it can still be scrolled\n"
"and searched like real output will be.  You are encouraged to experiment with\n"
"those features as explained in the prologue above.\n"
"\n"
"To enable real Inspect functionality, entries must be added to the end of the\n"
"top personal personal configuration file.  You could use your favorite editor\n"
"to accomplish this, taking care not to disturb existing entries.\n"
"\n"
"Another way to add entries is illustrated below, but it risks overwriting the\n"
"rcfile.  Redirected echoes must not replace (>) but append (>>) to that file.\n"
"\n"
"  /bin/echo -e \"pipe\\tOpen Files\\tlsof -P -p %d 2>&1\" >> ~/.toprc\n"
"  /bin/echo -e \"file\\tNUMA Info\\t/proc/%d/numa_maps\" >> ~/.toprc\n"
"  /bin/echo -e \"pipe\\tLog\\ttail -n200 /var/log/syslog | sort -Mr\" >> ~/.toprc\n"
"\n"
"If you don't know the location or name of the top rcfile, use the 'W' command\n"
"and note those details.  After backing up the current rcfile, try issuing the\n"
"above echoes exactly as shown, replacing '.toprc' as appropriate.  The safest\n"
"approach would be to use copy then paste to avoid any typing mistakes.\n"
"\n"
"Finally, restart top to reveal what actual Inspect entries combined with this\n"
"new command can offer.  The possibilities are endless, especially considering\n"
"that 'pipe' type entries can include shell scripts too!\n"
"\n"
"For additional important information, please consult the top documentation.\n"
"Then enhance top with your very own customized 'file' and 'pipe' entries.\n"
"\n"
"Enjoy!\n"
msgstr ""
"Ceci est une sortie simulée représentant le contenu d'un fichier ou la sortie\n"
"d'une commande. Quelle commande ou quel fichier dépend uniquement de vous.\n"
"\n"
"Bien que ce texte soit purement informatif, vous pouvez le faire défiler ou\n"
"lancer une recherche comme une sortie réelle. Vous êtes encouragé à\n"
"expérimenter ces fonctionnalités comme expliqué dans le prologue ci-dessus.\n"
"\n"
"Pour activer les fonctionnalités réelles d'Inspect, des entrées doivent être\n"
"ajoutées à la fin du fichier personnel de configuration de top. Vous pouvez\n"
"utiliser votre éditeur de texte pour accomplir ceci en prenant soin de ne\n"
"pas démettre les entrées existantes.\n"
"\n"
"Une autre manière d'ajouter les entrées est illustrée ci-dessous mais il y\n"
"a un risque qu'elle écrase le fichier rcfile. Les sorties echo redirigées\n"
"ne doivent pas remplacer le contenu (>) mais bien ajouter (>>) à la fin\n"
"du fichier.\n"
"\n"
"  /bin/echo -e \"pipe\\tOpen Files\\tlsof -P -p %d 2>&1\" >> ~/.toprc\n"
"  /bin/echo -e \"file\\tNUMA Info\\t/proc/%d/numa_maps\" >> ~/.toprc\n"
"  /bin/echo -e \"pipe\\tLog\\ttail -n200 /var/log/syslog | sort -Mr\" >> ~/.toprc\n"
"\n"
"Si vous ignorez l'emplacement ou le nom du fichier rcfiled de top, utilisez\n"
"la commande « W » et notez ces détails. Après avoir fait une copie de\n"
"sauvegarde du fichier rcfile actuel, essayez les commandes echo ci-dessus\n"
"exactement tel que montré. Remplacez « .toprc » par le bon nom de fichier.\n"
"La manière la plus sûre est d'utiliser un copier/coller pour éviter les\n"
"fautes de frappe.\n"
"\n"
"Finalement, redémarrez top pour révéler ce que les entrées Inspect combinées\n"
"avec cette nouvelle commande peuvent offrir. Les possibilités sont illimitées,\n"
"surtout en considérant que les entrées de type « pipe » peuvent inclure des\n"
"scripts shell aussi !\n"
"\n"
"Pour obtenir plus d'informations importantes, veuillez vous référer à la\n"
"documentation de top. Ensuite, améliorez top avec vos propres entrées\n"
"« file » et « pipe ».\n"
"\n"
"Amusez-vous !\n"

#: top/top_nls.c:441
msgid "to enable 'Y' press <Enter> then type 'W' and restart top"
msgstr "pour activer « Y », appuyez sur <Entrée> puis tapez « W » et redémarrez top"

#: top/top_nls.c:443
msgid "to enable 'Y' please consult the top man page (press Enter)"
msgstr "pour activer « Y », consultez la page man de top (pressez Entrée)"

#: top/top_nls.c:445
#, c-format
msgid "Selection failed with: %s\n"
msgstr "La sélection a échoué avec: %s\n"

#: top/top_nls.c:446
#, c-format
msgid "unable to inspect, pid %d not found"
msgstr "impossible d'inspecter, pid %d pas trouvé"

#: top/top_nls.c:447
#, c-format
msgid "inspect at PID [default pid = %d]"
msgstr "inspection du PID [pid par défaut = %d]"

#: top/top_nls.c:448
#, c-format
msgid "could not parse rcfile inspect entry %d"
msgstr "l'entrée inspect %d du fichier rcfile n'a pu être analysée"

#: top/top_nls.c:449
#, c-format
msgid "%s: %*d-%-*d lines, %*d-%*d columns, %lu bytes read"
msgstr "%s: %*d-%-*d lignes, %*d-%*d colonnes, %lu octets lus"

#: top/top_nls.c:450
msgid "patience please, working..."
msgstr "merci de patienter, travail en cours…"

#. Translation Hint: Below are 2 abbreviations which can be as long as needed:
#. .                 FLD = FIELD, VAL = VALUE
#: top/top_nls.c:453
#, c-format
msgid "add filter #%d (%s) as: [!]FLD?VAL"
msgstr "ajouter le filtre #%d (%s) comme: [!]FLD?VAL"

#: top/top_nls.c:454
msgid "ignoring case"
msgstr "ignore les majuscules/minuscules"

#: top/top_nls.c:455
msgid "case sensitive"
msgstr "sensible à la casse"

#: top/top_nls.c:456
msgid "duplicate filter was ignored"
msgstr "le doublon dans les filtres a été ignoré"

#: top/top_nls.c:457
#, c-format
msgid "'%s' filter delimiter is missing"
msgstr "délimiteur manquant dans le filtre « %s »"

#: top/top_nls.c:458
#, c-format
msgid "'%s' filter value is missing"
msgstr "valeur manquante dans le filtre « %s »"

#: top/top_nls.c:459
msgid "include"
msgstr "inclure"

#: top/top_nls.c:460
msgid "exclude"
msgstr "exclure"

#: top/top_nls.c:461
#, c-format
msgid "<Enter> to resume, filters: %s"
msgstr "<Enter> pour continuer, filtres: %s"

#: top/top_nls.c:462
msgid "none"
msgstr "aucun"

#: top/top_nls.c:463
#, c-format
msgid "Node%-2d:"
msgstr "Nœud%-2d:"

#: top/top_nls.c:464
#, c-format
msgid "expand which node (0-%d)"
msgstr "Développer quel nœud (0-%d)"

#: top/top_nls.c:465
msgid "invalid node"
msgstr "nœud invalide"

#: top/top_nls.c:466
msgid "sorry, NUMA extensions unavailable"
msgstr "désolé, les extensions NUMA ne sont pas disponibles"

#. Translation Notes ------------------------------------------------
#. .  It is strongly recommend that the --no-wrap command line option
#. .  be used with all supporting translation tools, when available.
#. .
#. .  The next several text groups contain special escape sequences
#. .  representing values used to index a table at run-time.
#. .
#. .  Each such sequence consists of a tilde (~) followed by an ascii
#. .  number in the range of '1' - '8'.  Examples are '~2', '~8', etc.
#. .  These escape sequences must never themselves be translated but
#. .  could be deleted.
#. .
#. .  If you remove these escape sequences (both tilde and number) it
#. .  would make translation easier.  However, the ability to display
#. .  colors and bold text at run-time will have been lost.
#. .
#. .  Additionally, each of these text groups was designed to display
#. .  in a 80x24 terminal window.  Hopefully, any translations will
#. .  adhere to that goal lest the translated text be truncated.
#. .
#. .  If you would like additional information regarding these strings,
#. .  please see the prologue to the show_special function in the top.c
#. .  source file.
#. .
#: top/top_nls.c:500
#, c-format
msgid ""
"Help for Interactive Commands~2 - %s\n"
"Window ~1%s~6: ~1Cumulative mode ~3%s~2.  ~1System~6: ~1Delay ~3%.1f secs~2; ~1Secure mode ~3%s~2.\n"
"\n"
"  Z~5,~1B~5,E,e   Global: '~1Z~2' colors; '~1B~2' bold; '~1E~2'/'~1e~2' summary/task memory scale\n"
"  l,t,m     Toggle Summary: '~1l~2' load avg; '~1t~2' task/cpu stats; '~1m~2' memory info\n"
"  0,1,2,3,I Toggle: '~10~2' zeros; '~11~2/~12~2/~13~2' cpus or numa node views; '~1I~2' Irix mode\n"
"  f,F,X     Fields: '~1f~2'/'~1F~2' add/remove/order/sort; '~1X~2' increase fixed-width\n"
"\n"
"  L,&,<,> . Locate: '~1L~2'/'~1&~2' find/again; Move sort column: '~1<~2'/'~1>~2' left/right\n"
"  R,H,V,J . Toggle: '~1R~2' Sort; '~1H~2' Threads; '~1V~2' Forest view; '~1J~2' Num justify\n"
"  c,i,S,j . Toggle: '~1c~2' Cmd name/line; '~1i~2' Idle; '~1S~2' Time; '~1j~2' Str justify\n"
"  x~5,~1y~5     . Toggle highlights: '~1x~2' sort field; '~1y~2' running tasks\n"
"  z~5,~1b~5     . Toggle: '~1z~2' color/mono; '~1b~2' bold/reverse (only if 'x' or 'y')\n"
"  u,U,o,O . Filter by: '~1u~2'/'~1U~2' effective/any user; '~1o~2'/'~1O~2' other criteria\n"
"  n,#,^O  . Set: '~1n~2'/'~1#~2' max tasks displayed; Show: ~1Ctrl~2+'~1O~2' other filter(s)\n"
"  C,...   . Toggle scroll coordinates msg for: ~1up~2,~1down~2,~1left~2,~1right~2,~1home~2,~1end~2\n"
"\n"
"%s  W,Y       Write configuration file '~1W~2'; Inspect other output '~1Y~2'\n"
"  q         Quit\n"
"          ( commands shown with '.' require a ~1visible~2 task display ~1window~2 ) \n"
"Press '~1h~2' or '~1?~2' for help with ~1Windows~2,\n"
"Type 'q' or <Esc> to continue "
msgstr ""
"Aide pour les commandes interactives~2 - %s\n"
"Fenêtre ~1%s~6: ~1Mode cumulatif ~3%s~2.  ~1Système~6: ~1Délai ~3%.1lf secs~2; ~1Mode sûr ~3%s~2.\n"
"\n"
"  Z~5,~1B~5,E,e   Global: «~1Z~2» couleurs; «~1B~2» gras; «~1E~2»/«~1e~2» résumé/échelle mem tâches\n"
"  l,t,m     Commuter résumé: «~1l~2» charge moy; «~1t~2» stats tâche/cpu; «~1m~2» info mem\n"
"  0,1,2,3,I Commuter: «~10~2» zéros; «~11~2/~12~2/~13~2» vues nœuds cpus ou numa; «~1I~2» Mode Irix\n"
"  f,F,X     Champs: «~1f~2»/«~1F~2» ajouter/supprimer/ordre/tri; «~1X~2» augmenter largeur fixe\n"
"\n"
"  L,&,<,> . Identifier: «~1L~2»/«~1&~2» chercher/encore; Déplacer colonne tri: «~1<~2»/«~1>~2» gauche/droite\n"
"  R,H,V,J . Commuter: «~1R~2» Tri; «~1H~2» Threads; «~1V~2» Vue forêt; «~1J~2» Justifier nombre\n"
"  c,i,S,j . Commuter: «~1c~2» Nom/ligne com; «~1i~2» Repos; «~1S~2» Temps; «~1j~2» Justifier chaîne\n"
"  x~5,~1y~5     . Commuter mise en évidence: «~1x~2» champ de tri; «~1y~2» tâches en cours\n"
"  z~5,~1b~5     . Commuter: «~1z~2» couleur/mono; «~1b~2» gras/inverse (uniquement avec « x » ou « y »)\n"
"  u,U,o,O . Filtrer par: «~1u~2»/«~1U~2» utilisateur eff/tous; «~1o~2»/«~1O~2» autre critère\n"
"  n,#,^O  . Changer: «~1n~2»/«~1#~2» tâches max affichées; Montrer: ~1Ctrl~2+«~1O~2» autre(s) filtre(s)\n"
"  C,...   . Commuter msg coord défil pour: ~1haut~2,~1bas~2,~1gauche~2,~1droite~2,~1début~2,~1fin~2\n"
"\n"
"%s  W,Y       Écrire le fichier de config «~1W~2»; Inspecter autre sortie «~1Y~2»\n"
"  q         Quitter\n"
"         ( commandes montrée avec « . » exigent une ~1fenêtre~2 ~1visible~2 d'affichage des tâches ) \n"
"Appuyez sur «~1h̃2» ou «~1?~2» pour l'aide sur les ~1Fenêtres~2,\n"
"Appuyez sur « q » ou « ESC » pour continuer "

#. Translation Hint: As is true for the text above, the "keys" shown to the left and
#. .                 also imbedded in the translatable text (along with escape seqs)
#. .                 should never themselves be translated.
#: top/top_nls.c:528
msgid ""
"  k,r       Manipulate tasks: '~1k~2' kill; '~1r~2' renice\n"
"  d or s    Set update interval\n"
msgstr ""
"  k,r       Manipuler les tâches: «~1k̃~2» tuer; «~1r~2» courtoisie\n"
"  d ou s    Changer l'intervalle de mise à jour\n"

#: top/top_nls.c:532
#, c-format
msgid ""
"Help for Windows / Field Groups~2 - \"Current Window\" = ~1 %s ~6\n"
"\n"
". Use multiple ~1windows~2, each with separate config opts (color,fields,sort,etc)\n"
". The 'current' window controls the ~1Summary Area~2 and responds to your ~1Commands~2\n"
"  . that window's ~1task display~2 can be turned ~1Off~2 & ~1On~2, growing/shrinking others\n"
"  . with ~1NO~2 task display, some commands will be ~1disabled~2 ('i','R','n','c', etc)\n"
"    until a ~1different window~2 has been activated, making it the 'current' window\n"
". You ~1change~2 the 'current' window by: ~1 1~2) cycling forward/backward;~1 2~2) choosing\n"
"  a specific field group; or~1 3~2) exiting the color mapping or fields screens\n"
". Commands ~1available anytime   -------------~2\n"
"    A       . Alternate display mode toggle, show ~1Single~2 / ~1Multiple~2 windows\n"
"    g       . Choose another field group and make it 'current', or change now\n"
"              by selecting a number from: ~1 1~2 =%s;~1 2~2 =%s;~1 3~2 =%s; or~1 4~2 =%s\n"
". Commands ~1requiring~2 '~1A~2' mode~1  -------------~2\n"
"    G       . Change the ~1Name~5 of the 'current' window/field group\n"
" ~1*~4  a , w   . Cycle through all four windows:  '~1a~5' Forward; '~1w~5' Backward\n"
" ~1*~4  - , _   . Show/Hide:  '~1-~5' ~1Current~2 window; '~1_~5' all ~1Visible~2/~1Invisible~2\n"
"  The screen will be divided evenly between task displays.  But you can make\n"
"  some ~1larger~2 or ~1smaller~2, using '~1n~2' and '~1i~2' commands.  Then later you could:\n"
" ~1*~4  = , +   . Rebalance tasks:  '~1=~5' ~1Current~2 window; '~1+~5' ~1Every~2 window\n"
"              (this also forces the ~1current~2 or ~1every~2 window to become visible)\n"
"\n"
"In '~1A~2' mode, '~1*~4' keys are your ~1essential~2 commands.  Please try the '~1a~2' and '~1w~2'\n"
"commands plus the 'g' sub-commands NOW.  Press <Enter> to make 'Current' "
msgstr ""
"Aide pour les fenêtres / Groupes de champs~2 – « Fenêtre courante » = ~1 %s ~6\n"
"\n"
". Utiliser plusieurs ~1fenêtres~2, chacune avec des options de configuration (couleur,champs,tri,etc)\n"
". La fenêtre « courante » contrôle la ~1zone de résumé~2 et répond à vos ~1Commandes~2\n"
"  . l'~1affichage de tâches~2 de cette fenêtre peut être ~1éteint~2 ou ~1allumé~2, agrandir/réduire les autres\n"
"  . ~1SANS~2 affichage de tâches, certaines commandes seront ~1désactivées~2 («i»,«R»,«n»,«c», etc)\n"
"    jusqu'à ce qu'une ~1fenêtre différente~2 soit activée et devienne la fenêtre « courante »\n"
". Vous ~1changez~2 la fenêtre « courante » en: ~1 1~2) rotation avant/arrière;~1 2~2) choisissant\n"
"  un group de champ spécifique; ou~1 3~2) sortant des écrans de correspondance des couleurs ou des champs\n"
". Commandes ~1disponibles tout le temps   -------------~2\n"
"    A        . Basculer vers le mode d'affichage alternatif, montrer ~1Une~2 / ~1Plusieurs~2 fenêtres\n"
"    g        . Choisir un autre groupe de champs et le rendre « courant », ou changer maintenant\n"
"               en choisissant un nombre:  ~1 1~2 =%s;~1 2~2 =%s;~1 3~2 =%s; ou~1 4~2 =%s\n"
". Commandes ~1exigeant~2 le mode «~1A~2»~1  -------------~2\n"
"    G        . Changer le ~1Nom~2 de la fenêtre/groupe de champs « courant »\n"
" ~1*~4  a , w   . Rotation par toutes les quatre fenêtres: «~1a~5» avant, «~1w~5» arrière\n"
" ~1*~4  - , _   . Montrer/cacher: «~1-~5» fenêtre « courante »; «~1_~5» toutes ~1Visibles~2/~1Invisibles~2\n"
" L'écran sera divisé de manière équitable entre les affichages de tâches. Mais vous pouvez en rendre\n"
" certaines plus ~1larges~2 ou plus ~1petites~2 en utilisant les commandes  «~1n~2» et «~1i~2».\n"
" Vous pouvez ensuite:\n"
" ~1*~4  = , +   . Ré-équilibrer les tâches: «~1=~5» fenêtre ~1courante~2; «~1+̃5» ~1toutes~2 fenêtres\n"
"              (ceci force aussi la fenêtre ~1courante~2 ou ~1toutes~2 les fenêtres à devenir visibles)\n"
"\n"
"En mode «~1A~2», les touches «~1*~4» sont vos commandes ~1essentielles~2. Essayez les commandes «~1a~2»\n"
"et «~1w~2» ainsi que les sous-commandes «g» MAINTENANT. Appuyez sur « Entrée » pour rendre « courant » "

#. Translation Notes ------------------------------------------------
#. .  The following 'Help for color mapping' simulated screen should
#. .  probably NOT be translated.  It is terribly hard to follow in
#. .  this form and any translation could produce unpleasing results
#. .  that are unlikely to parallel the running top program.
#. .
#. .  If you decide to proceed with translation, do the following
#. .  lines only, taking care not to disturbe the tilde + number.
#. .
#. .  Simulated screen excerpt:
#. .     --> "   Tasks:~3  64 ~2total,~3   2 ~3running,~3  62
#. .     --> "   %%Cpu(s):~3  76.5 ~2user,~3  11.2 ~2system,~
#. .     --> "   ~1 Nasty Message! ~4  -or-  ~1Input Prompt~5
#. .
#. .     --> "   available toggles: ~1B~2 =disable bold globa
#. .     --> "       ~1z~2 =color/mono (~1%s~2), ~1b~2 =tasks
#. .
#. .     --> "Select ~1target~2 as upper case letter:\n"
#. .     --> "   S~2 = Summary Data,~1  M~2 = Messages/Prompt
#. .     --> "   H~2 = Column Heads,~1  T~2 = Task Informatio
#. .     --> "Select ~1color~2 as number:\n"
#. .     --> "   0~2 = black,~1  1~2 = red,    ~1  2~2 = gree
#. .     --> "   4~2 = blue, ~1  5~2 = magenta,~1  6~2 = cyan
#. .
#: top/top_nls.c:582
#, c-format
msgid ""
"Help for color mapping~2 - %s\n"
"current window: ~1%s~6\n"
"\n"
"   color - 04:25:44 up 8 days, 50 min,  7 users,  load average:\n"
"   Tasks:~3  64 ~2total,~3   2 ~3running,~3  62 ~2sleeping,~3   0 ~2stopped,~3\n"
"   %%Cpu(s):~3  76.5 ~2user,~3  11.2 ~2system,~3   0.0 ~2nice,~3  12.3 ~2idle~3\n"
"   ~1 Nasty Message! ~4  -or-  ~1Input Prompt~5\n"
"   ~1  PID TTY     PR  NI %%CPU    TIME+   VIRT SWAP S COMMAND    ~6\n"
"   17284 ~8pts/2  ~7  8   0  0.0   0:00.75  1380    0 S /bin/bash   ~8\n"
"   ~1 8601 pts/1    7 -10  0.4   0:00.03   916    0 R color -b -z~7\n"
"   11005 ~8?      ~7  9   0  0.0   0:02.50  2852 1008 S amor -sessi~8\n"
"   available toggles: ~1B~2 =disable bold globally (~1%s~2),\n"
"       ~1z~2 =color/mono (~1%s~2), ~1b~2 =tasks \"bold\"/reverse (~1%s~2)\n"
"\n"
"1) Select a ~1target~2 as an upper case letter, ~1current target~2 is ~1 %c ~4:\n"
"   S~2 = Summary Data,~1  M~2 = Messages/Prompts,\n"
"   H~2 = Column Heads,~1  T~2 = Task Information\n"
"2) Select a ~1color~2 as a number, ~1current color~2 is ~1 %d ~4:\n"
"   0~2 = black,~1  1~2 = red,    ~1  2~2 = green,~1  3~2 = yellow,\n"
"   4~2 = blue, ~1  5~2 = magenta,~1  6~2 = cyan, ~1  7~2 = white\n"
"\n"
"3) Then use these keys when finished:\n"
"   'q' to abort changes to window '~1%s~2'\n"
"   'a' or 'w' to commit & change another, <Enter> to commit and end "
msgstr ""
"Aide pour la correspondance des couleurs~2 - %s\n"
"fenêtre actuelle: ~1%s~6\n"
"\n"
"   couleur - 04:25:44 up 8 jours, 50 min,  7 utilisateurs,  charge moyenne:\n"
"   Tâches:~3  64 ~2total,~3   2 ~3exécutée,~3  62 ~2endormie,~3   0 ~2arrêtée,~3\n"
"   %%Cpu(s):~3  76.5 ~2util.,~3  11.2 ~2système,~3   0.0 ~2nice,~3  12.3 ~2inactif~3\n"
"   ~1 Message méchant! ~4  -or-  ~1Invite d'entrée~5\n"
"   ~1  PID TTY     PR  NI %%CPU    TEMPS+   VIRT SWAP S COMMANDE    ~6\n"
"   17284 ~8pts/2  ~7  8   0  0.0   0:00.75  1380    0 S /bin/bash   ~8\n"
"   ~1 8601 pts/1    7 -10  0.4   0:00.03   916    0 R couleur -b -z~7\n"
"   11005 ~8?      ~7  9   0  0.0   0:02.50  2852 1008 S amor -sessi~8\n"
"   commutateurs disponibles: ~1B~2 =désactive gras globalement (~1%s~2),\n"
"       ~1z~2 =couleur/mono (~1%s~2), ~1b~2 =tâches \"gras\"/inversé (~1%s~2)\n"
"\n"
"1) Choisissez une ~1cible~2 en lettre majuscule, la ~1cible actuelle~2 est ~1 %c ~4:\n"
"   S~2 = Données résumées,~1  M~2 = Messages/Invites,\n"
"   H~2 = En-têtes de colonnes,~1  T~2 = Informations tâches\n"
"2) Choisissez une ~1couleur~2 par un nombre, la ~1couleur actuelle~2 est ~1 %d ~4:\n"
"   0~2 = noir,~1   1~2 = rouge,  ~1  2~2 = vert ,~1  3~2 = jaune,\n"
"   4~2 = bleu, ~1  5~2 = magenta,~1  6~2 = cyan, ~1  7~2 = blanc\n"
"\n"
"3) Utilisez ensuite ces touches pour terminer:\n"
"   'q' pour annuler les changements à la fenêtre '~1%s~2'\n"
"   'a' ou 'w' pour valider et changer une autre, <Entrée> pour valider et terminer "

#: top/top_nls.c:608
#, c-format
msgid ""
"Fields Management~2 for window ~1%s~6, whose current sort field is ~1%s~2\n"
"   Navigate with Up/Dn, Right selects for move then <Enter> or Left commits,\n"
"   'd' or <Space> toggles display, 's' sets sort.  Use 'q' or <Esc> to end!\n"
msgstr ""
"Gestion des champs~2 pour la fenêtre ~1%s~6 qui trie selon le champ ~1%s~2\n"
"   Naviguer avec Haut/Bas, Droit sélectionne pour le déplacement puis <Entrée> ou Gauche applique le changement,\n"
"   'd' ou <Espace> bascule l'affichage, 's' change le tri. Utiliser 'q' ou <Echap> pour terminer !\n"

#: top/top_nls.c:613
#, c-format
msgid "%s:~3 %3u ~2total,~3 %3u ~2running,~3 %3u ~2sleeping,~3 %3u ~2stopped,~3 %3u ~2zombie~3\n"
msgstr "%s:~3 %3u ~2total,~3 %3u ~2en cours,~3 %3u ~2en veille,~3 %3u ~2arrêté,~3 %3u ~2zombie~3\n"

#: top/top_nls.c:616
#, c-format
msgid "%%%s~3 %#5.1f  ~2user,~3 %#5.1f  ~2system,~3 %#5.1f  ~2nice,~3 %#5.1f  ~2idle~3\n"
msgstr "%%%s~3 %#5.1f ~2util.,~3 %#5.1f ~2système,~3 %#5.1f ~2courtoisie,~3 %#5.1f ~2inactif~3\n"

#: top/top_nls.c:619
#, c-format
msgid "%%%s~3 %#5.1f  ~2user,~3 %#5.1f  ~2system,~3 %#5.1f  ~2nice,~3 %#5.1f  ~2idle,~3 %#5.1f  ~2IO-wait~3\n"
msgstr "%%%s~3 %#5.1f  ~2util.,~3 %#5.1f  ~2système,~3 %#5.1f  ~2courtoisie,~3 %#5.1f  ~2inactif,~3 %#5.1f  ~2attente E/S~3\n"

#. Translation Hint: Only the following abbreviations need be translated
#. .                 us = user, sy = system, ni = nice, id = idle, wa = wait,
#. .                 hi hardware interrupt, si = software interrupt
#: top/top_nls.c:625
#, c-format
msgid "%%%s~3 %#5.1f ~2us,~3 %#5.1f ~2sy,~3 %#5.1f ~2ni,~3 %#5.1f ~2id,~3 %#5.1f ~2wa,~3 %#5.1f ~2hi,~3 %#5.1f ~2si~3\n"
msgstr "%%%s~3 %#5.1f ~2ut,~3 %#5.1f ~2sy,~3 %#5.1f ~2ni,~3 %#5.1f ~2id,~3 %#5.1f ~2wa,~3 %#5.1f ~2hi,~3 %#5.1f ~2si~3\n"

#. Translation Hint: Only the following abbreviations need be translated
#. .                 us = user, sy = system, ni = nice, id = idle, wa = wait,
#. .                 hi hardware interrupt, si = software interrupt, st = steal time
#: top/top_nls.c:631
#, c-format
msgid "%%%s~3%#5.1f ~2us,~3%#5.1f ~2sy,~3%#5.1f ~2ni,~3%#5.1f ~2id,~3%#5.1f ~2wa,~3%#5.1f ~2hi,~3%#5.1f ~2si,~3%#5.1f ~2st~3\n"
msgstr "%%%s~3%#5.1f ~2ut,~3%#5.1f ~2sy,~3%#5.1f ~2ni,~3%#5.1f ~2id,~3%#5.1f ~2wa,~3%#5.1f ~2hi,~3%#5.1f ~2si,~3%#5.1f ~2st~3\n"

#. Translation Hint: Only the following need be translated
#. .                 abbreviations: Mem = physical memory/ram, Swap = the linux swap file
#. .                 words:         total, used, free, buffers, cached
#: top/top_nls.c:637
#, c-format
msgid ""
"%s Mem: ~3 %9.9s~2total,~3 %9.9s~2used,~3 %9.9s~2free,~3 %9.9s~2buffers~3\n"
"%s Swap:~3 %9.9s~2total,~3 %9.9s~2used,~3 %9.9s~2free.~3 %9.9s~2cached Mem~3\n"
msgstr ""
"%s Mém: ~3 %9.9s~2total,~3 %9.9s~2util,~3 %9.9s~2libr,~3 %9.9s~2tampons~3\n"
"%s Éch: ~3 %9.9s~2total,~3 %9.9s~2util,~3 %9.9s~2libr.~3 %9.9s~2Mém cache~3\n"

#: top/top_nls.c:641
#, c-format
msgid ""
"Inspection~2 Pause at: pid ~1%d~6 running ~1%s~6 as user ~1%s~6\n"
"Use~2:  left/right then <Enter> to ~1select~5 an option; 'q' or <Esc> to ~1end~5 !\n"
"Options~2: ~1%s\n"
msgstr ""
"Inspection~2 Pause at: pid ~1%d~6 en cours ~1%s~6 comme utilisateur ~1%s~6\n"
"Utilisez~2:  gauche/droite puis <Entrée> pour ~1sélectionner~5 une option; 'q' ou <Éch> pour ~1terminer~5 !\n"
"Options~2: ~1%s\n"

#: top/top_nls.c:646
#, c-format
msgid ""
"Inspection~2 View at: ~1%s~3, ~1%s~3, ~1%s~3.  Locating: ~1%s~6\n"
"Use~2:  left/right/up/down/etc to ~1navigate~5 the output; 'L'/'&' to ~1locate~5/~1next~5.\n"
"Or~2:   <Enter> to ~1select another~5; 'q' or <Esc> to ~1end~5 !\n"
msgstr ""
"Inspection~2 Vue à: ~1%s~3, ~1%s~3, ~1%s~3.  Position: ~1%s~6\n"
"Utilisez~2:  gauche/droite/haut/bas/etc pour ~1naviguer~5 dans la sortie; 'L'/'&' pour ~1trouver~5/~1suivant~5.\n"
"Ou~2:   <Entrée> pour ~1sélectionner une autre~5; 'q' or <Éch> pour ~1terminer~5 !\n"

#: uptime.c:61
msgid " -p, --pretty   show uptime in pretty format\n"
msgstr " -p, --pretty   montre le temps de fonctionnement dans un joli format\n"

#: uptime.c:63
msgid " -s, --since    system up since\n"
msgstr " -s, --since    système en route depuis\n"

#: vmstat.c:94
#, c-format
msgid " %s [options] [delay [count]]\n"
msgstr " %s [options] [délai [décompte]]\n"

#: vmstat.c:97
msgid " -a, --active           active/inactive memory\n"
msgstr " -a, --active           active/désactive la mémoire\n"

#: vmstat.c:98
msgid " -f, --forks            number of forks since boot\n"
msgstr " -f, --forks            nombre de forks depuis l'amorçage\n"

#: vmstat.c:99
msgid " -m, --slabs            slabinfo\n"
msgstr " -m, --slabs            slabinfo\n"

#: vmstat.c:100
msgid " -n, --one-header       do not redisplay header\n"
msgstr " -n, --one-header       ne réaffiche pas l'en-tête\n"

#: vmstat.c:101
msgid " -s, --stats            event counter statistics\n"
msgstr " -s, --stats            statistiques du compteur d'événements\n"

#: vmstat.c:102
msgid " -d, --disk             disk statistics\n"
msgstr " -d, --disk             statistiques du disque\n"

#: vmstat.c:103
msgid " -D, --disk-sum         summarize disk statistics\n"
msgstr " -D, --disks-sum        résume les statistiques du disque\n"

#: vmstat.c:104
msgid " -p, --partition <dev>  partition specific statistics\n"
msgstr " -p, --partition <dev>  statistiques spécifiques à la partition\n"

#: vmstat.c:105
msgid " -S, --unit <char>      define display unit\n"
msgstr " -S, --unit <char>      défini les unités d'affichage\n"

#: vmstat.c:106
msgid " -w, --wide             wide output\n"
msgstr " -w, --wide             sortie large\n"

#: vmstat.c:107
msgid " -t, --timestamp        show timestamp\n"
msgstr " -t, --timestamp        affiche l'horodatage\n"

#: vmstat.c:196
msgid "procs -----------memory---------- ---swap-- -----io---- -system-- ------cpu-----"
msgstr "procs ----------mémoire---------- -échange- -----io---- -système- ------cpu-----"

#: vmstat.c:198
msgid "procs -----------------------memory---------------------- ---swap-- -----io---- -system-- --------cpu--------"
msgstr "procs -----------------------mémoire--------------------- -échange- -----io---- -système- --------cpu--------"

#: vmstat.c:199 vmstat.c:524
msgid " -----timestamp-----"
msgstr " -----horodatage----"

#. Translation Hint: max 2 chars
#: vmstat.c:218
msgid "r"
msgstr "r"

#. Translation Hint: max 2 chars
#: vmstat.c:220
msgid "b"
msgstr "b"

#. Translation Hint: max 6 chars
#: vmstat.c:222
msgid "swpd"
msgstr "swpd"

#. Translation Hint: max 6 chars
#: vmstat.c:224
msgid "free"
msgstr "libre"

#. Translation Hint: max 6 chars
#: vmstat.c:226
msgid "inact"
msgstr "inact"

#. Translation Hint: max 6 chars
#: vmstat.c:228
msgid "buff"
msgstr "tampon"

#. Translation Hint: max 6 chars
#: vmstat.c:230
msgid "active"
msgstr "actif"

#. Translation Hint: max 6 chars
#: vmstat.c:232
msgid "cache"
msgstr "cache"

#. Translation Hint: max 4 chars
#: vmstat.c:234
msgid "si"
msgstr "si"

#. Translation Hint: max 4 chars
#: vmstat.c:236
msgid "so"
msgstr "so"

#. Translation Hint: max 5 chars
#: vmstat.c:238
msgid "bi"
msgstr "bi"

#. Translation Hint: max 5 chars
#: vmstat.c:240
msgid "bo"
msgstr "bo"

#. Translation Hint: max 4 chars
#: vmstat.c:242
msgid "in"
msgstr "in"

#. Translation Hint: max 4 chars
#: vmstat.c:244
msgid "cs"
msgstr "cs"

#. Translation Hint: max 2 chars
#: vmstat.c:246
msgid "us"
msgstr "us"

#. Translation Hint: max 2 chars
#: vmstat.c:248
msgid "sy"
msgstr "sy"

#. Translation Hint: max 2 chars
#: vmstat.c:250
msgid "id"
msgstr "id"

#. Translation Hint: max 2 chars
#: vmstat.c:252
msgid "wa"
msgstr "wa"

#. Translation Hint: max 2 chars
#: vmstat.c:254
msgid "st"
msgstr "st"

#. Translation Hint: Translating folloging disk partition
#. * header fields that follow (marked with max x chars) might
#. * not work, unless manual page is translated as well.
#. Translation Hint: max 10 chars. The word is
#. * expected to be centralized, use spaces at the end
#. * to do that.
#: vmstat.c:437
msgid "reads  "
msgstr "lectures"

#. Translation Hint: max 10 chars
#: vmstat.c:439
msgid "read sectors"
msgstr "secteurs lus"

#. Translation Hint: max 10 chars. The word is
#. * expected to be centralized, use spaces at the end
#. * to do that.
#: vmstat.c:443
msgid "writes   "
msgstr "écritures"

#. Translation Hint: max 10 chars
#: vmstat.c:445
msgid "requested writes"
msgstr "écritures dem"

#: vmstat.c:459
msgid "your kernel does not support diskstat. (2.5.70 or above required)"
msgstr "votre kernel ne supporte pas diskstat. (2.5.70 ou plus requis)"

#: vmstat.c:521
msgid "disk- ------------reads------------ ------------writes----------- -----IO------"
msgstr "disq- -----------lectures--------- -----------écritures--------- -----ES------"

#: vmstat.c:523
msgid "disk- -------------------reads------------------- -------------------writes------------------ ------IO-------"
msgstr "disq- ------------------lectures----------------- ------------------écritures---------------- ------ES-------"

#. Translation Hint: max 6 chars
#: vmstat.c:542 vmstat.c:550
msgid "total"
msgstr "total"

#. Translation Hint: max 6 chars
#: vmstat.c:544 vmstat.c:552
msgid "merged"
msgstr "fusion"

#. Translation Hint: max 7 chars
#: vmstat.c:546 vmstat.c:554
msgid "sectors"
msgstr "secteurs"

#. Translation Hint: max 7 chars
#: vmstat.c:548 vmstat.c:556
msgid "ms"
msgstr "ms"

#. Translation Hint: max 6 chars
#: vmstat.c:558
msgid "cur"
msgstr "cur"

#. Translation Hint: max 6 chars
#: vmstat.c:560
msgid "sec"
msgstr "sec"

#: vmstat.c:670
msgid "your kernel does not support diskstat (2.5.70 or above required)"
msgstr "votre kernel ne supporte pas diskstat (2.5.70 ou plus requis)"

#. Translation Hint: Translating folloging slab fields that
#. * follow (marked with max x chars) might not work, unless
#. * manual page is translated as well.
#. Translation Hint: max 24 chars
#: vmstat.c:680
msgid "Cache"
msgstr "Cache"

#. Translation Hint: max 6 chars
#: vmstat.c:682
msgid "Num"
msgstr "#"

#. Translation Hint: max 6 chars
#: vmstat.c:684
msgid "Total"
msgstr "Total"

#. Translation Hint: max 6 chars
#: vmstat.c:686
msgid "Size"
msgstr "Taille"

#. Translation Hint: max 6 chars
#: vmstat.c:688
msgid "Pages"
msgstr "Pages"

#: vmstat.c:700
msgid "your kernel does not support slabinfo or your permissions are insufficient"
msgstr "votre kernel ne supporte pas slabinfo ou vos permissions sont insuffisantes"

#: vmstat.c:752
#, c-format
msgid "%13d disks \n"
msgstr "%13d disques \n"

#: vmstat.c:753
#, c-format
msgid "%13d partitions \n"
msgstr "%13d partitions \n"

#: vmstat.c:769
#, c-format
msgid "%13lu total reads\n"
msgstr "%13lu lectures totales\n"

#: vmstat.c:770
#, c-format
msgid "%13lu merged reads\n"
msgstr "%13lu lectures fusionnées\n"

#: vmstat.c:771
#, c-format
msgid "%13lu read sectors\n"
msgstr "%13lu secteurs lus\n"

#: vmstat.c:772
#, c-format
msgid "%13lu milli reading\n"
msgstr "%13lu temps lectures (ms)\n"

#: vmstat.c:773
#, c-format
msgid "%13lu writes\n"
msgstr "%13lu écritures\n"

#: vmstat.c:774
#, c-format
msgid "%13lu merged writes\n"
msgstr "%13lu écritures fusionnées\n"

#: vmstat.c:775
#, c-format
msgid "%13lu written sectors\n"
msgstr "%13lu secteurs écrits\n"

#: vmstat.c:776
#, c-format
msgid "%13lu milli writing\n"
msgstr "%13lu temps écritures (ms)\n"

#: vmstat.c:777
#, c-format
msgid "%13lu inprogress IO\n"
msgstr "%13lu E/S en cours\n"

#: vmstat.c:778
#, c-format
msgid "%13lu milli spent IO\n"
msgstr "%13lu temps E/S consommés (ms)\n"

#: vmstat.c:799
#, c-format
msgid "%13lu %s total memory\n"
msgstr "%13lu %s mémoire totale\n"

#: vmstat.c:800
#, c-format
msgid "%13lu %s used memory\n"
msgstr "%13lu %s mémoire utilisée\n"

#: vmstat.c:801
#, c-format
msgid "%13lu %s active memory\n"
msgstr "%13lu %s mémoire active\n"

#: vmstat.c:802
#, c-format
msgid "%13lu %s inactive memory\n"
msgstr "%13lu %s mémoire inactive\n"

#: vmstat.c:803
#, c-format
msgid "%13lu %s free memory\n"
msgstr "%13lu %s mémoire libre\n"

#: vmstat.c:804
#, c-format
msgid "%13lu %s buffer memory\n"
msgstr "%13lu %s mémoire tampon\n"

#: vmstat.c:805
#, c-format
msgid "%13lu %s swap cache\n"
msgstr "%13lu %s mémoire échange\n"

#: vmstat.c:806
#, c-format
msgid "%13lu %s total swap\n"
msgstr "%13lu %s échange total\n"

#: vmstat.c:807
#, c-format
msgid "%13lu %s used swap\n"
msgstr "%13lu %s échange utilisé\n"

#: vmstat.c:808
#, c-format
msgid "%13lu %s free swap\n"
msgstr "%13lu %s partition d'échange libre\n"

#: vmstat.c:809
#, c-format
msgid "%13lld non-nice user cpu ticks\n"
msgstr "%13lld tics du cpu utilisateur non-courtois\n"

#: vmstat.c:810
#, c-format
msgid "%13lld nice user cpu ticks\n"
msgstr "%13lld tics cpu utilisateur courtois\n"

#: vmstat.c:811
#, c-format
msgid "%13lld system cpu ticks\n"
msgstr "%13lld tics cpu système\n"

#: vmstat.c:812
#, c-format
msgid "%13lld idle cpu ticks\n"
msgstr "%13lld tics cpu inactif\n"

#: vmstat.c:813
#, c-format
msgid "%13lld IO-wait cpu ticks\n"
msgstr "%13lld tics cpu attente E/S\n"

#: vmstat.c:814
#, c-format
msgid "%13lld IRQ cpu ticks\n"
msgstr "%13lld tics cpu IRQ\n"

#: vmstat.c:815
#, c-format
msgid "%13lld softirq cpu ticks\n"
msgstr "%13lld tics cpu IRQ soft\n"

#: vmstat.c:816
#, c-format
msgid "%13lld stolen cpu ticks\n"
msgstr "%13lld tics cpu volés\n"

#: vmstat.c:817
#, c-format
msgid "%13lu pages paged in\n"
msgstr "%13lu pages lues depuis le disque\n"

#: vmstat.c:818
#, c-format
msgid "%13lu pages paged out\n"
msgstr "%13lu pages écrites sur le disque\n"

#: vmstat.c:819
#, c-format
msgid "%13lu pages swapped in\n"
msgstr "%13lu pages mises en mémoire d'échange\n"

#: vmstat.c:820
#, c-format
msgid "%13lu pages swapped out\n"
msgstr "%13lu pages sorties de la mémoire d'échange\n"

#: vmstat.c:821
#, c-format
msgid "%13u interrupts\n"
msgstr "%13u interruptions\n"

#: vmstat.c:822
#, c-format
msgid "%13u CPU context switches\n"
msgstr "%13u changements de contexte CPU\n"

#: vmstat.c:823
#, c-format
msgid "%13u boot time\n"
msgstr "%13u heure d'amorçage\n"

#: vmstat.c:824 vmstat.c:839
#, c-format
msgid "%13u forks\n"
msgstr "%13u clonages\n"

#. Translation Hint: do not change argument characters
#: vmstat.c:941
msgid "-S requires k, K, m or M (default is KiB)"
msgstr "-S requiert k, K, m ou M (KiB par défaut)"

#: vmstat.c:992
#, c-format
msgid "partition was not found\n"
msgstr "la partition n'a pas été trouvée\n"

#: watch.c:89
#, c-format
msgid " %s [options] command\n"
msgstr " %s [options] commande\n"

#: watch.c:91
msgid "  -b, --beep             beep if command has a non-zero exit\n"
msgstr "  -b, --beep             émet un bip si la commande sort avec un code non nul\n"

#: watch.c:92
msgid "  -c, --color            interpret ANSI color sequences\n"
msgstr "  -c, --color            interprète les séquences de couleurs ANSI\n"

#: watch.c:93
msgid ""
"  -d, --differences[=<permanent>]\n"
"                         highlight changes between updates\n"
msgstr ""
"  -d, --differences[=<permanent>]\n"
"                         met en évidence les changements entre mises à jours\n"

#: watch.c:95
msgid "  -e, --errexit          exit if command has a non-zero exit\n"
msgstr "  -e, --errexit          termine si la commande sort avec un code non nul\n"

#: watch.c:96
msgid "  -g, --chgexit          exit when output from command changes\n"
msgstr "  -g, --chgexit          termine quand la sortie de la commande change\n"

#: watch.c:97
msgid "  -n, --interval <secs>  seconds to wait between updates\n"
msgstr "  -n, --interval <sec>   secondes de délai entre mises à jours\n"

#: watch.c:98
msgid "  -p, --precise          attempt run command in precise intervals\n"
msgstr "  -p, --precise          essaie d'exécuter la commande à intervalles réguliers\n"

#: watch.c:99
msgid "  -t, --no-title         turn off header\n"
msgstr "  -t, --no-title         masque l'en-tête\n"

#: watch.c:100
msgid "  -x, --exec             pass command to exec instead of \"sh -c\"\n"
msgstr "  -x, --exec             passe la commande à exec au lieu de « sh -c »\n"

#: watch.c:103
msgid " -v, --version  output version information and exit\n"
msgstr " -v, --version  affiche les informations de version et sort\n"

#: watch.c:312
#, c-format
msgid "Every %.1fs: "
msgstr "Toutes les %.1lfs: "

#: watch.c:373
msgid "unable to create IPC pipes"
msgstr "impossible de créer les tubes IPC"

#: watch.c:383
msgid "unable to fork process"
msgstr "impossible de clôner le processus"

#: watch.c:388
msgid "dup2 failed"
msgstr "dup2 a échoué"

#: watch.c:395
#, c-format
msgid "unable to execute '%s'"
msgstr "impossible d'exécuter « %s »"

#: watch.c:412
msgid "fdopen"
msgstr "fdopen"

#: watch.c:541
msgid "waitpid"
msgstr "waitpid"

#: watch.c:549
msgid "command exit with a non-zero status, press a key to exit"
msgstr "la commande s'est terminée avec un statut non nul, pressez une touche pour terminer"

#: watch.c:674
#, c-format
msgid "unicode handling error\n"
msgstr "erreur de gestion de unicode\n"

#: watch.c:680
#, c-format
msgid "unicode handling error (malloc)\n"
msgstr "erreur de gestion de unicode (malloc)\n"

#: w.c:236 w.c:251
#, c-format
msgid " %2ludays"
msgstr "%2lujours"

#. Translation Hint: Minutes:Seconds
#. Translation Hint: Hours:Minutes
#: w.c:245 w.c:255
#, c-format
msgid " %2lu:%02um"
msgstr " %2lu:%02um"

#. Translation Hint: Seconds:Centiseconds
#: w.c:263
#, c-format
msgid " %2lu.%02us"
msgstr " %2lu.%02us"

#: w.c:445
msgid " -h, --no-header     do not print header\n"
msgstr " -h, --no-header     n'affiche pas l'en-tête\n"

#: w.c:446
msgid " -u, --no-current    ignore current process username\n"
msgstr " -u, --no-current    ignore le nom d'utilisateur du processus courant\n"

#: w.c:447
msgid " -s, --short         short format\n"
msgstr " -s, --short         format court\n"

#: w.c:448
msgid " -f, --from          show remote hostname field\n"
msgstr " -f, --from          montre le champ du nom d'hôte distant\n"

#: w.c:449
msgid " -o, --old-style     old style output\n"
msgstr " -o, --old-style     sortie dans l'ancien style\n"

#: w.c:450
msgid " -i, --ip-addr       display IP address instead of hostname (if possible)\n"
msgstr " -i, --ip-addr       affiche l'adresse IP au lieu du nom d'hôte (si possible)\n"

#: w.c:547
#, c-format
msgid "User length environment PROCPS_USERLEN must be between 8 and %i, ignoring.\n"
msgstr "la longueur « utilisateur » dans l'environnement PROCPS_USERLEN doit être entre 8 et %i, ignoré.\n"

#: w.c:557
#, c-format
msgid "from length environment PROCPS_FROMLEN must be between 8 and %d, ignoring\n"
msgstr "la longueur « de » dans l'environnement PROCPS_FROMLEN doit être entre 8 et %d, ignoré.\n"

#: w.c:569
#, c-format
msgid "%d column window is too narrow"
msgstr "la fenêtre avec %d colonnes est trop étroite"

#: w.c:571
#, c-format
msgid "%d column width exceeds command buffer size, truncating to %d"
msgstr "la largeur de colonne %d dépasse la taille du tampon de commande, tronqué à %d"

#: w.c:577
#, c-format
msgid "warning: screen width %d suboptimal"
msgstr "attention: la largeur %d de l'écran n'est pas optimale"

#. Translation Hint: Following five uppercase messages are
#. * headers. Try to keep alignment intact.
#: w.c:586
#, c-format
msgid "%-*s TTY      "
msgstr "%-*s TTY      "

#: w.c:588
msgid "FROM"
msgstr "DE  "

#: w.c:590
#, c-format
msgid "  LOGIN@   IDLE   JCPU   PCPU WHAT\n"
msgstr "  LOGIN@   IDLE   JCPU   PCPU QUOI\n"

#: w.c:592
#, c-format
msgid "   IDLE WHAT\n"
msgstr "   IDLE QUOI\n"