# Vietnamese translation for CryptSetup. # Bản dịch tiếng Việt dành cho cryptsetup. # Copyright © 2016 Free Software Foundation, Inc. # This file is distributed under the same license as the cryptsetup package. # Clytie Siddall , 2010. # Trần Ngọc Quân , 2012-2014, 2015, 2016, 2017. # msgid "" msgstr "" "Project-Id-Version: cryptsetup 1.7.4\n" "Report-Msgid-Bugs-To: dm-crypt@saout.de\n" "POT-Creation-Date: 2021-05-21 17:33+0200\n" "PO-Revision-Date: 2017-03-05 15:08+0700\n" "Last-Translator: Trần Ngọc Quân \n" "Language-Team: Vietnamese \n" "Language: vi\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Bugs: Report translation errors to the Language-Team address.\n" "Plural-Forms: nplurals=1; plural=0;\n" "X-Generator: Gtranslator 2.91.7\n" #: lib/libdevmapper.c:408 #, fuzzy #| msgid "Cannot initialize device-mapper, running as non-root user.\n" msgid "Cannot initialize device-mapper, running as non-root user." msgstr "Không thể khởi tạo ánh-xạ-thiết-bị (device-mapper), do không chạy dưới quyền siêu người dùng.\n" #: lib/libdevmapper.c:411 #, fuzzy #| msgid "Cannot initialize device-mapper. Is dm_mod kernel module loaded?\n" msgid "Cannot initialize device-mapper. Is dm_mod kernel module loaded?" msgstr "" "Không thể khởi tạo tiến trình ánh xạ thiết bị.\n" "Mô-đun hạt nhân “dm_mod” được nạp chưa?\n" #: lib/libdevmapper.c:1180 #, fuzzy #| msgid "Requested LUKS hash %s is not supported.\n" msgid "Requested deferred flag is not supported." msgstr "Không hỗ trợ chuỗi duy nhất LUKS %s được yêu cầu.\n" #: lib/libdevmapper.c:1249 #, fuzzy, c-format #| msgid "DM-UUID for device %s was truncated.\n" msgid "DM-UUID for device %s was truncated." msgstr "Mã số DM-UUID cho thiết bị %s bị cắt ngắn.\n" #: lib/libdevmapper.c:1580 msgid "Unknown dm target type." msgstr "" #: lib/libdevmapper.c:1701 lib/libdevmapper.c:1706 lib/libdevmapper.c:1766 #: lib/libdevmapper.c:1769 #, fuzzy #| msgid "Requested dm-crypt performance options are not supported.\n" msgid "Requested dm-crypt performance options are not supported." msgstr "Không hỗ trợ tùy chọn hiệu năng dm-crypt đã yêu cầu.\n" #: lib/libdevmapper.c:1713 lib/libdevmapper.c:1717 #, fuzzy #| msgid "Requested dm-verity data corruption handling options are not supported.\n" msgid "Requested dm-verity data corruption handling options are not supported." msgstr "Không hỗ trợ tùy chọn xử lý dữ liệu sai hỏng dm-verity đã yêu cầu.\n" #: lib/libdevmapper.c:1721 #, fuzzy #| msgid "Requested dm-crypt performance options are not supported.\n" msgid "Requested dm-verity FEC options are not supported." msgstr "Không hỗ trợ tùy chọn hiệu năng dm-crypt đã yêu cầu.\n" #: lib/libdevmapper.c:1725 #, fuzzy #| msgid "Requested dm-crypt performance options are not supported.\n" msgid "Requested data integrity options are not supported." msgstr "Không hỗ trợ tùy chọn hiệu năng dm-crypt đã yêu cầu.\n" #: lib/libdevmapper.c:1727 #, fuzzy #| msgid "Requested dm-crypt performance options are not supported.\n" msgid "Requested sector_size option is not supported." msgstr "Không hỗ trợ tùy chọn hiệu năng dm-crypt đã yêu cầu.\n" #: lib/libdevmapper.c:1732 #, fuzzy #| msgid "Requested dm-verity data corruption handling options are not supported.\n" msgid "Requested automatic recalculation of integrity tags is not supported." msgstr "Không hỗ trợ tùy chọn xử lý dữ liệu sai hỏng dm-verity đã yêu cầu.\n" #: lib/libdevmapper.c:1736 lib/libdevmapper.c:1772 lib/libdevmapper.c:1775 #: lib/luks2/luks2_json_metadata.c:2170 #, fuzzy #| msgid "Hash algorithm %s not supported.\n" msgid "Discard/TRIM is not supported." msgstr "Thuật toán băm %s không được hỗ trợ.\n" #: lib/libdevmapper.c:1740 #, fuzzy #| msgid "Requested dm-verity data corruption handling options are not supported.\n" msgid "Requested dm-integrity bitmap mode is not supported." msgstr "Không hỗ trợ tùy chọn xử lý dữ liệu sai hỏng dm-verity đã yêu cầu.\n" #: lib/libdevmapper.c:2713 #, c-format msgid "Failed to query dm-%s segment." msgstr "" #: lib/random.c:75 msgid "" "System is out of entropy while generating volume key.\n" "Please move mouse or type some text in another window to gather some random events.\n" msgstr "" "Hệ thống bị nằm ngoài en-trô-pi trong khi tạo khóa vùng chứa.\n" "Xin hãy di chuyển con chuột hay gõ vài chữ trong cửa sổ khác để thu thập sự kiện ngẫu nhiên.\n" #: lib/random.c:79 #, c-format msgid "Generating key (%d%% done).\n" msgstr "Đang tạo khóa (xong %d%%).\n" #: lib/random.c:165 #, fuzzy #| msgid "Running in FIPS mode.\n" msgid "Running in FIPS mode." msgstr "Đang chạy trong chế độ FIPS.\n" #: lib/random.c:171 #, fuzzy #| msgid "Fatal error during RNG initialisation.\n" msgid "Fatal error during RNG initialisation." msgstr "Gặp lỗi nghiêm trọng trong quá trình khởi tạo RNG.\n" #: lib/random.c:208 #, fuzzy #| msgid "Unknown RNG quality requested.\n" msgid "Unknown RNG quality requested." msgstr "Không hiểu chất lượng RNG đã yêu cầu.\n" #: lib/random.c:213 #, fuzzy #| msgid "Error %d reading from RNG: %s\n" msgid "Error reading from RNG." msgstr "Lỗi %d khi đọc từ RNG: %s\n" #: lib/setup.c:229 #, fuzzy #| msgid "Cannot initialize crypto RNG backend.\n" msgid "Cannot initialize crypto RNG backend." msgstr "Không thể khởi tạo ứng dụng chạy ở phía sau (backend) mã hóa RNG.\n" #: lib/setup.c:235 #, fuzzy #| msgid "Cannot initialize crypto backend.\n" msgid "Cannot initialize crypto backend." msgstr "Không thể khởi ứng dụng mã hóa chạy ở phía sau (backend).\n" #: lib/setup.c:266 lib/setup.c:2046 lib/verity/verity.c:120 #, fuzzy, c-format #| msgid "Hash algorithm %s not supported.\n" msgid "Hash algorithm %s not supported." msgstr "Thuật toán băm %s không được hỗ trợ.\n" #: lib/setup.c:269 lib/loopaes/loopaes.c:90 #, fuzzy, c-format #| msgid "Key processing error (using hash %s).\n" msgid "Key processing error (using hash %s)." msgstr "Lỗi xử lý khóa (dùng mã băm %s).\n" #: lib/setup.c:335 lib/setup.c:362 #, fuzzy #| msgid "Cannot determine device type. Incompatible activation of device?\n" msgid "Cannot determine device type. Incompatible activation of device?" msgstr "Không thể dò tìm kiểu thiết bị. Phần hoạt hóa của thiết bị không tương thích à?\n" #: lib/setup.c:341 lib/setup.c:3058 #, fuzzy #| msgid "This operation is supported only for LUKS device.\n" msgid "This operation is supported only for LUKS device." msgstr "Thao tác này được hỗ trợ chỉ cho thiết bị LUKS.\n" #: lib/setup.c:368 #, fuzzy #| msgid "This operation is supported only for LUKS device.\n" msgid "This operation is supported only for LUKS2 device." msgstr "Thao tác này được hỗ trợ chỉ cho thiết bị LUKS.\n" #: lib/setup.c:423 lib/luks2/luks2_reencrypt.c:2347 #, fuzzy #| msgid "All key slots full.\n" msgid "All key slots full." msgstr "Mọi khe khóa đều đã đầy.\n" #: lib/setup.c:434 #, fuzzy, c-format #| msgid "Key slot %d is invalid, please select between 0 and %d.\n" msgid "Key slot %d is invalid, please select between 0 and %d." msgstr "Khe khóa %d không đúng, hãy chọn một giá trị trong phạm vi từ 0 đến %d.\n" #: lib/setup.c:440 #, fuzzy, c-format #| msgid "Key slot %d is full, please select another one.\n" msgid "Key slot %d is full, please select another one." msgstr "Khe khóa %d bị đầy, hãy chọn một khe khác.\n" #: lib/setup.c:525 lib/setup.c:2832 #, fuzzy #| msgid "Device %s is not a valid LUKS device.\n" msgid "Device size is not aligned to device logical block size." msgstr "Thiết bị %s không phải là một thiết bị kiểu LUKS đúng.\n" #: lib/setup.c:624 #, fuzzy, c-format #| msgid "Header detected but device %s is too small.\n" msgid "Header detected but device %s is too small." msgstr "Phát hiện được phần đầu nhưng mà thiết bị %s quá nhỏ.\n" #: lib/setup.c:661 lib/setup.c:2777 #, fuzzy #| msgid "This operation is not supported for this device type.\n" msgid "This operation is not supported for this device type." msgstr "Thao tác này không được hỗ trợ cho kiểu thiết bị này.\n" #: lib/setup.c:666 msgid "Illegal operation with reencryption in-progress." msgstr "" #: lib/setup.c:832 lib/luks1/keymanage.c:482 #, fuzzy, c-format #| msgid "Unsupported LUKS version %d.\n" msgid "Unsupported LUKS version %d." msgstr "Phiên bản LUKS không được hỗ trợ %d.\n" #: lib/setup.c:1427 lib/setup.c:2547 lib/setup.c:2619 lib/setup.c:2631 #: lib/setup.c:2785 lib/setup.c:4532 #, fuzzy, c-format #| msgid "Device %s is not active.\n" msgid "Device %s is not active." msgstr "Thiết bị %s không hoạt động.\n" #: lib/setup.c:1444 #, fuzzy, c-format #| msgid "Underlying device for crypt device %s disappeared.\n" msgid "Underlying device for crypt device %s disappeared." msgstr "Thiết bị nằm dưới cho thiết bị crypt %s đã bị biến mất.\n" #: lib/setup.c:1524 #, fuzzy #| msgid "Invalid plain crypt parameters.\n" msgid "Invalid plain crypt parameters." msgstr "Đặt sai tham số mã hóa bình thường.\n" #: lib/setup.c:1529 lib/setup.c:1949 #, fuzzy #| msgid "Invalid key size.\n" msgid "Invalid key size." msgstr "Kích cỡ khóa không đúng.\n" #: lib/setup.c:1534 lib/setup.c:1954 lib/setup.c:2157 #, fuzzy #| msgid "UUID is not supported for this crypt type.\n" msgid "UUID is not supported for this crypt type." msgstr "UUID không hỗ trợ kiểu mã hóa này.\n" #: lib/setup.c:1539 lib/setup.c:1959 #, fuzzy #| msgid "UUID is not supported for this crypt type.\n" msgid "Detached metadata device is not supported for this crypt type." msgstr "UUID không hỗ trợ kiểu mã hóa này.\n" #: lib/setup.c:1549 lib/setup.c:1739 lib/luks2/luks2_reencrypt.c:2308 #: src/cryptsetup.c:1296 src/cryptsetup.c:4037 #, fuzzy #| msgid "Cannot read reencryption log file.\n" msgid "Unsupported encryption sector size." msgstr "Không đọc được tập tin nhật ký reencryption.\n" #: lib/setup.c:1557 lib/setup.c:1864 lib/setup.c:2826 #, fuzzy #| msgid "Device %s is not a valid LUKS device.\n" msgid "Device size is not aligned to requested sector size." msgstr "Thiết bị %s không phải là một thiết bị kiểu LUKS đúng.\n" #: lib/setup.c:1608 lib/setup.c:1727 #, fuzzy #| msgid "Can't format LUKS without device.\n" msgid "Can't format LUKS without device." msgstr "Không thể định dạng “LUKS” mà không có thiết bị.\n" #: lib/setup.c:1614 lib/setup.c:1733 msgid "Requested data alignment is not compatible with data offset." msgstr "" #: lib/setup.c:1682 lib/setup.c:1851 msgid "WARNING: Data offset is outside of currently available data device.\n" msgstr "" #: lib/setup.c:1692 lib/setup.c:1879 lib/setup.c:1900 lib/setup.c:2169 #, fuzzy, c-format #| msgid "Cannot wipe header on device %s.\n" msgid "Cannot wipe header on device %s." msgstr "Không thể tẩy xóa phần đầu trên thiết bị %s.\n" #: lib/setup.c:1744 msgid "WARNING: The device activation will fail, dm-crypt is missing support for requested encryption sector size.\n" msgstr "" #: lib/setup.c:1766 msgid "Volume key is too small for encryption with integrity extensions." msgstr "" #: lib/setup.c:1821 #, fuzzy, c-format #| msgid "Cipher %s is not available.\n" msgid "Cipher %s-%s (key size %zd bits) is not available." msgstr "Mã hóa kiểu %s không sẵn có.\n" #: lib/setup.c:1854 #, c-format msgid "WARNING: LUKS2 metadata size changed to % bytes.\n" msgstr "" #: lib/setup.c:1858 #, c-format msgid "WARNING: LUKS2 keyslots area size changed to % bytes.\n" msgstr "" #: lib/setup.c:1882 lib/utils_device.c:852 lib/luks1/keyencryption.c:255 #: lib/luks2/luks2_reencrypt.c:2358 lib/luks2/luks2_reencrypt.c:3383 #, fuzzy, c-format #| msgid "Device %s is too small.\n" msgid "Device %s is too small." msgstr "Thiết bị %s có kích cỡ quá nhỏ.\n" #: lib/setup.c:1893 lib/setup.c:1919 #, fuzzy, c-format #| msgid "Cannot format device %s which is still in use.\n" msgid "Cannot format device %s in use." msgstr "Không thể định dạng thiết bị %s mà nó lại vẫn đang được sử dụng.\n" #: lib/setup.c:1896 lib/setup.c:1922 #, fuzzy, c-format #| msgid "Cannot format device %s, permission denied.\n" msgid "Cannot format device %s, permission denied." msgstr "Không thể định dạng thiết bị %s, không đủ thẩm quyền.\n" #: lib/setup.c:1908 lib/setup.c:2229 #, fuzzy, c-format #| msgid "Cannot write device %s.\n" msgid "Cannot format integrity for device %s." msgstr "Không thể ghi thiết bị %s.\n" #: lib/setup.c:1926 #, fuzzy, c-format #| msgid "Cannot read device %s.\n" msgid "Cannot format device %s." msgstr "Không thể đọc thiết bị %s.\n" #: lib/setup.c:1944 #, fuzzy #| msgid "Can't format LOOPAES without device.\n" msgid "Can't format LOOPAES without device." msgstr "Không thể định dạng “LOOPAES” bên ngoài thiết bị.\n" #: lib/setup.c:1989 #, fuzzy #| msgid "Can't format VERITY without device.\n" msgid "Can't format VERITY without device." msgstr "Không thể định dạng “VERITY” mà không có thiết bị.\n" #: lib/setup.c:2000 lib/verity/verity.c:103 #, fuzzy, c-format #| msgid "Unsupported VERITY hash type %d.\n" msgid "Unsupported VERITY hash type %d." msgstr "Kiểu băm “VERITY” %d không được hỗ trợ.\n" #: lib/setup.c:2006 lib/verity/verity.c:111 #, fuzzy #| msgid "Unsupported VERITY block size.\n" msgid "Unsupported VERITY block size." msgstr "Kích thước khối “VERITY” không được hỗ trợ.\n" #: lib/setup.c:2011 lib/verity/verity.c:75 #, fuzzy #| msgid "Unsupported VERITY hash offset.\n" msgid "Unsupported VERITY hash offset." msgstr "Khoảng bù (offset) mã băm “VERITY” không được hỗ trợ.\n" #: lib/setup.c:2016 #, fuzzy #| msgid "Unsupported VERITY hash offset.\n" msgid "Unsupported VERITY FEC offset." msgstr "Khoảng bù (offset) mã băm “VERITY” không được hỗ trợ.\n" #: lib/setup.c:2040 #, fuzzy #| msgid "Data area overlaps with hash area.\n" msgid "Data area overlaps with hash area." msgstr "Vùng dữ liệu chồng lấn với vùng mã băm.\n" #: lib/setup.c:2065 #, fuzzy #| msgid "Data area overlaps with hash area.\n" msgid "Hash area overlaps with FEC area." msgstr "Vùng dữ liệu chồng lấn với vùng mã băm.\n" #: lib/setup.c:2072 #, fuzzy #| msgid "Data area overlaps with hash area.\n" msgid "Data area overlaps with FEC area." msgstr "Vùng dữ liệu chồng lấn với vùng mã băm.\n" #: lib/setup.c:2208 #, c-format msgid "WARNING: Requested tag size %d bytes differs from %s size output (%d bytes).\n" msgstr "" #: lib/setup.c:2286 #, fuzzy, c-format #| msgid "Unknown crypt device type %s requested.\n" msgid "Unknown crypt device type %s requested." msgstr "Không rõ kiểu thiết bị mã hóa %s được yêu cầu.\n" #: lib/setup.c:2553 lib/setup.c:2625 lib/setup.c:2638 #, fuzzy, c-format #| msgid "Cannot wipe header on device %s.\n" msgid "Unsupported parameters on device %s." msgstr "Không thể tẩy xóa phần đầu trên thiết bị %s.\n" #: lib/setup.c:2559 lib/setup.c:2644 lib/luks2/luks2_reencrypt.c:2410 #: lib/luks2/luks2_reencrypt.c:2753 #, fuzzy, c-format #| msgid "Cannot wipe header on device %s.\n" msgid "Mismatching parameters on device %s." msgstr "Không thể tẩy xóa phần đầu trên thiết bị %s.\n" #: lib/setup.c:2664 msgid "Crypt devices mismatch." msgstr "" #: lib/setup.c:2701 lib/setup.c:2706 lib/luks2/luks2_reencrypt.c:2054 #: lib/luks2/luks2_reencrypt.c:3161 #, fuzzy, c-format #| msgid "Cannot read device %s.\n" msgid "Failed to reload device %s." msgstr "Không thể đọc thiết bị %s.\n" #: lib/setup.c:2711 lib/setup.c:2716 lib/luks2/luks2_reencrypt.c:2025 #: lib/luks2/luks2_reencrypt.c:2032 #, fuzzy, c-format #| msgid "Failed to open key file.\n" msgid "Failed to suspend device %s." msgstr "Gặp lỗi khi mở tập tin khóa.\n" #: lib/setup.c:2721 lib/luks2/luks2_reencrypt.c:2039 #: lib/luks2/luks2_reencrypt.c:3096 lib/luks2/luks2_reencrypt.c:3165 #, fuzzy, c-format #| msgid "Cannot read device %s.\n" msgid "Failed to resume device %s." msgstr "Không thể đọc thiết bị %s.\n" #: lib/setup.c:2735 #, c-format msgid "Fatal error while reloading device %s (on top of device %s)." msgstr "" #: lib/setup.c:2738 lib/setup.c:2740 #, fuzzy, c-format #| msgid "Failed to obtain device mapper directory." msgid "Failed to switch device %s to dm-error." msgstr "Lỗi lấy thư mục trình ánh xạ thiết bị." #: lib/setup.c:2817 #, fuzzy #| msgid "Cannot resize loop device.\n" msgid "Cannot resize loop device." msgstr "Không thể đổi cỡ thiết bị vòng ngược (loopback).\n" #: lib/setup.c:2890 msgid "Do you really want to change UUID of device?" msgstr "Bạn có thực sự muốn thay đổi UUID cho thiết bị?" #: lib/setup.c:2966 #, fuzzy #| msgid "Backup file doesn't contain valid LUKS header.\n" msgid "Header backup file does not contain compatible LUKS header." msgstr "Tập tin sao lưu không chứa phần đầu LUKS hợp lệ.\n" #: lib/setup.c:3066 #, fuzzy, c-format #| msgid "Volume %s is not active.\n" msgid "Volume %s is not active." msgstr "Khối tin %s không hoạt động.\n" #: lib/setup.c:3077 #, fuzzy, c-format #| msgid "Volume %s is already suspended.\n" msgid "Volume %s is already suspended." msgstr "Khối %s đã bị ngưng.\n" #: lib/setup.c:3090 #, fuzzy, c-format #| msgid "Suspend is not supported for device %s.\n" msgid "Suspend is not supported for device %s." msgstr "Tạm dừng không được hỗ trợ cho kiểu thiết bị %s.\n" #: lib/setup.c:3092 #, fuzzy, c-format #| msgid "Error during suspending device %s.\n" msgid "Error during suspending device %s." msgstr "Gặp lỗi khi tạm dừng thiết bị %s.\n" #: lib/setup.c:3128 #, fuzzy, c-format #| msgid "Resume is not supported for device %s.\n" msgid "Resume is not supported for device %s." msgstr "Thao tác phục hồi không được hỗ trợ cho kiểu thiết bị %s.\n" #: lib/setup.c:3130 #, fuzzy, c-format #| msgid "Error during resuming device %s.\n" msgid "Error during resuming device %s." msgstr "Gặp lỗi khi cho hoạt động trở lại thiết bị %s.\n" #: lib/setup.c:3164 lib/setup.c:3212 lib/setup.c:3282 #, fuzzy, c-format #| msgid "Volume %s is not suspended.\n" msgid "Volume %s is not suspended." msgstr "Vùng %s không bị treo.\n" #: lib/setup.c:3297 lib/setup.c:3652 lib/setup.c:4325 lib/setup.c:4338 #: lib/setup.c:4346 lib/setup.c:4359 lib/setup.c:4713 lib/setup.c:5862 #, fuzzy #| msgid "Volume key does not match the volume.\n" msgid "Volume key does not match the volume." msgstr "Khóa khối tin không tương ứng với khối tin đó.\n" #: lib/setup.c:3344 lib/setup.c:3535 #, fuzzy #| msgid "Cannot add key slot, all slots disabled and no volume key provided.\n" msgid "Cannot add key slot, all slots disabled and no volume key provided." msgstr "Không thể thêm khe khóa vì mọi khe đều bị tắt và không cung cấp khóa khối tin.\n" #: lib/setup.c:3487 #, fuzzy #| msgid "Failed to swap new key slot.\n" msgid "Failed to swap new key slot." msgstr "Gặp lỗi khi hoán đổi khe khóa mới.\n" #: lib/setup.c:3673 #, fuzzy, c-format #| msgid "Key slot %d is invalid.\n" msgid "Key slot %d is invalid." msgstr "Khe khóa %d không đúng.\n" #: lib/setup.c:3679 src/cryptsetup.c:1634 src/cryptsetup.c:1979 #, fuzzy, c-format #| msgid "Key slot %d is not used.\n" msgid "Keyslot %d is not active." msgstr "Khe khóa %d không được dùng.\n" #: lib/setup.c:3698 #, fuzzy #| msgid "Data area overlaps with hash area.\n" msgid "Device header overlaps with data area." msgstr "Vùng dữ liệu chồng lấn với vùng mã băm.\n" #: lib/setup.c:3991 msgid "Reencryption in-progress. Cannot activate device." msgstr "" #: lib/setup.c:3993 lib/luks2/luks2_json_metadata.c:2253 #: lib/luks2/luks2_reencrypt.c:2852 #, fuzzy #| msgid "Cannot read reencryption log file.\n" msgid "Failed to get reencryption lock." msgstr "Không đọc được tập tin nhật ký reencryption.\n" #: lib/setup.c:4006 lib/luks2/luks2_reencrypt.c:2871 #, fuzzy #| msgid "Cannot open reencryption log file.\n" msgid "LUKS2 reencryption recovery failed." msgstr "Không mở được tập tin nhật ký reencryption.\n" #: lib/setup.c:4137 lib/setup.c:4399 #, fuzzy #| msgid "Device type is not properly initialised.\n" msgid "Device type is not properly initialized." msgstr "Kiểu thiết bị gần như chắc chắn là chưa được thiết lập.\n" #: lib/setup.c:4185 #, fuzzy, c-format #| msgid "Device %s already exists.\n" msgid "Device %s already exists." msgstr "Thiết bị %s đã sẵn có.\n" #: lib/setup.c:4192 #, fuzzy, c-format #| msgid "Cannot format device %s which is still in use.\n" msgid "Cannot use device %s, name is invalid or still in use." msgstr "Không thể định dạng thiết bị %s mà nó lại vẫn đang được sử dụng.\n" #: lib/setup.c:4312 #, fuzzy #| msgid "Incorrect volume key specified for plain device.\n" msgid "Incorrect volume key specified for plain device." msgstr "Khóa vùng chứa đã chỉ định không đúng cho thiết bị thường.\n" #: lib/setup.c:4425 #, fuzzy #| msgid "Incorrect root hash specified for verity device.\n" msgid "Incorrect root hash specified for verity device." msgstr "Mã băm gốc đã chỉ định không đúng cho thiết bị chứng thực (verity).\n" #: lib/setup.c:4432 msgid "Root hash signature required." msgstr "" #: lib/setup.c:4441 msgid "Kernel keyring missing: required for passing signature to kernel." msgstr "" #: lib/setup.c:4458 lib/setup.c:5938 #, fuzzy #| msgid "Failed to open key file.\n" msgid "Failed to load key in kernel keyring." msgstr "Gặp lỗi khi mở tập tin khóa.\n" #: lib/setup.c:4511 lib/setup.c:4527 lib/luks2/luks2_json_metadata.c:2306 #: src/cryptsetup.c:2744 #, fuzzy, c-format #| msgid "Device %s is still in use.\n" msgid "Device %s is still in use." msgstr "Thiết bị %s vẫn đang được sử dụng.\n" #: lib/setup.c:4536 #, fuzzy, c-format #| msgid "Invalid device %s.\n" msgid "Invalid device %s." msgstr "Thiết bị không đúng %s.\n" #: lib/setup.c:4652 #, fuzzy #| msgid "Volume key buffer too small.\n" msgid "Volume key buffer too small." msgstr "Vùng đệm khóa khối tin quá nhỏ.\n" #: lib/setup.c:4660 #, fuzzy #| msgid "Cannot retrieve volume key for plain device.\n" msgid "Cannot retrieve volume key for plain device." msgstr "Không thể lấy khóa khối tin cho thiết bị bình thường.\n" #: lib/setup.c:4677 #, fuzzy #| msgid "Incorrect root hash specified for verity device.\n" msgid "Cannot retrieve root hash for verity device." msgstr "Mã băm gốc đã chỉ định không đúng cho thiết bị chứng thực (verity).\n" #: lib/setup.c:4679 #, fuzzy, c-format #| msgid "This operation is not supported for %s crypt device.\n" msgid "This operation is not supported for %s crypt device." msgstr "Thao tác này không được hỗ trợ cho thiết bị mã hóa %s.\n" #: lib/setup.c:4885 #, fuzzy #| msgid "Dump operation is not supported for this device type.\n" msgid "Dump operation is not supported for this device type." msgstr "Thao tác đổ đống (dump) không được hỗ trợ cho kiểu thiết bị này.\n" #: lib/setup.c:5213 #, c-format msgid "Data offset is not multiple of %u bytes." msgstr "" #: lib/setup.c:5498 #, fuzzy, c-format #| msgid "Cannot format device %s which is still in use.\n" msgid "Cannot convert device %s which is still in use." msgstr "Không thể định dạng thiết bị %s mà nó lại vẫn đang được sử dụng.\n" #: lib/setup.c:5795 #, c-format msgid "Failed to assign keyslot %u as the new volume key." msgstr "" #: lib/setup.c:5868 msgid "Failed to initialize default LUKS2 keyslot parameters." msgstr "" #: lib/setup.c:5874 #, fuzzy, c-format #| msgid "Failed to swap new key slot.\n" msgid "Failed to assign keyslot %d to digest." msgstr "Gặp lỗi khi hoán đổi khe khóa mới.\n" #: lib/setup.c:6005 #, fuzzy #| msgid "This operation is not supported for this device type.\n" msgid "Kernel keyring is not supported by the kernel." msgstr "Thao tác này không được hỗ trợ cho kiểu thiết bị này.\n" #: lib/setup.c:6015 lib/luks2/luks2_reencrypt.c:2968 #, fuzzy, c-format #| msgid "Failed to read from key storage.\n" msgid "Failed to read passphrase from keyring (error %d)." msgstr "Lỗi đọc từ kho lưu khóa.\n" #: lib/setup.c:6039 msgid "Failed to acquire global memory-hard access serialization lock." msgstr "" #: lib/utils.c:80 #, fuzzy #| msgid "Cannot get process priority.\n" msgid "Cannot get process priority." msgstr "Không thể lấy mức ưu tiên của tiến trình.\n" #: lib/utils.c:94 #, fuzzy #| msgid "Cannot unlock memory.\n" msgid "Cannot unlock memory." msgstr "Không thể mở khóa bộ nhớ.\n" #: lib/utils.c:168 lib/tcrypt/tcrypt.c:497 #, fuzzy #| msgid "Failed to open key file.\n" msgid "Failed to open key file." msgstr "Gặp lỗi khi mở tập tin khóa.\n" #: lib/utils.c:173 #, fuzzy #| msgid "Cannot read keyfile %s.\n" msgid "Cannot read keyfile from a terminal." msgstr "Không thể đọc tập-tin khóa %s.\n" #: lib/utils.c:190 #, fuzzy #| msgid "Failed to stat key file.\n" msgid "Failed to stat key file." msgstr "Gặp lỗi khi lấy thông tin tập tin khóa.\n" #: lib/utils.c:198 lib/utils.c:219 #, fuzzy #| msgid "Cannot seek to requested keyfile offset.\n" msgid "Cannot seek to requested keyfile offset." msgstr "Không thể di chuyển vị trí đầu đọc tới vị trí tương đối (offset) tập tin khóa đã yêu cầu.\n" #: lib/utils.c:213 lib/utils.c:228 src/utils_password.c:223 #: src/utils_password.c:235 #, fuzzy #| msgid "Out of memory while reading passphrase.\n" msgid "Out of memory while reading passphrase." msgstr "Tràn bộ nhớ trong khi đọc cụm từ mật khẩu.\n" #: lib/utils.c:248 #, fuzzy #| msgid "Error reading passphrase.\n" msgid "Error reading passphrase." msgstr "Lỗi đọc cụm từ mật khẩu.\n" #: lib/utils.c:265 msgid "Nothing to read on input." msgstr "" #: lib/utils.c:272 #, fuzzy #| msgid "Maximum keyfile size exceeded.\n" msgid "Maximum keyfile size exceeded." msgstr "Đã vượt quá kích thước tập tin khóa tối đa.\n" #: lib/utils.c:277 #, fuzzy #| msgid "Cannot read requested amount of data.\n" msgid "Cannot read requested amount of data." msgstr "Không thể đọc đống dữ liệu đã yêu cầu.\n" #: lib/utils_device.c:190 lib/utils_storage_wrappers.c:110 #: lib/luks1/keyencryption.c:91 #, fuzzy, c-format #| msgid "Device %s doesn't exist or access denied.\n" msgid "Device %s does not exist or access denied." msgstr "Thiết bị %s không tồn tại hoặc không đủ quyền truy cập.\n" #: lib/utils_device.c:200 #, fuzzy, c-format #| msgid "Device %s is not active.\n" msgid "Device %s is not compatible." msgstr "Thiết bị %s không hoạt động.\n" #: lib/utils_device.c:544 #, c-format msgid "Ignoring bogus optimal-io size for data device (%u bytes)." msgstr "" #: lib/utils_device.c:666 #, fuzzy, c-format #| msgid "Device %s is too small. (LUKS requires at least % bytes.)\n" msgid "Device %s is too small. Need at least % bytes." msgstr "Thiết bị %s quá nhỏ. (LUKS cần ít nhất % byte.)\n" #: lib/utils_device.c:747 #, fuzzy, c-format #| msgid "Cannot use device %s which is in use (already mapped or mounted).\n" msgid "Cannot use device %s which is in use (already mapped or mounted)." msgstr "Không thể sử dụng thiết bị %s mà nó lại đang được sử dụng (đang được ánh xạ hoặc gắn).\n" #: lib/utils_device.c:751 #, fuzzy, c-format #| msgid "Cannot write to device %s, permission denied.\n" msgid "Cannot use device %s, permission denied." msgstr "Không thể ghi thiết bị %s, không đủ thẩm quyền.\n" #: lib/utils_device.c:754 #, fuzzy, c-format #| msgid "Cannot get info about device %s.\n" msgid "Cannot get info about device %s." msgstr "Không thể lấy thông tin về thiết bị %s.\n" #: lib/utils_device.c:777 #, fuzzy #| msgid "Cannot use a loopback device, running as non-root user.\n" msgid "Cannot use a loopback device, running as non-root user." msgstr "Không thể sử dụng thiết-bị vòng ngược (loopback), do không chạy dưới quyền siêu người dùng.\n" #: lib/utils_device.c:787 #, fuzzy #| msgid "Attaching loopback device failed (loop device with autoclear flag is required).\n" msgid "Attaching loopback device failed (loop device with autoclear flag is required)." msgstr "Gặp lỗi khi gắn thiết bị vòng ngược (loopback) (thiết bị lặp với cờ autoclear là bắt buộc).\n" #: lib/utils_device.c:833 #, fuzzy, c-format #| msgid "Requested offset is beyond real size of device %s.\n" msgid "Requested offset is beyond real size of device %s." msgstr "Khoảng bù (offset) đã yêu cầu nằm ngoài kích thước thật của thiết bị %s.\n" #: lib/utils_device.c:841 #, fuzzy, c-format #| msgid "Device %s has zero size.\n" msgid "Device %s has zero size." msgstr "Thiết bị %s có kích cỡ là không.\n" #: lib/utils_pbkdf.c:100 msgid "Requested PBKDF target time cannot be zero." msgstr "" #: lib/utils_pbkdf.c:106 #, c-format msgid "Unknown PBKDF type %s." msgstr "" #: lib/utils_pbkdf.c:111 #, fuzzy, c-format #| msgid "Requested LUKS hash %s is not supported.\n" msgid "Requested hash %s is not supported." msgstr "Không hỗ trợ chuỗi duy nhất LUKS %s được yêu cầu.\n" #: lib/utils_pbkdf.c:122 #, fuzzy #| msgid "Requested LUKS hash %s is not supported.\n" msgid "Requested PBKDF type is not supported for LUKS1." msgstr "Không hỗ trợ chuỗi duy nhất LUKS %s được yêu cầu.\n" #: lib/utils_pbkdf.c:128 msgid "PBKDF max memory or parallel threads must not be set with pbkdf2." msgstr "" #: lib/utils_pbkdf.c:133 lib/utils_pbkdf.c:143 #, c-format msgid "Forced iteration count is too low for %s (minimum is %u)." msgstr "" #: lib/utils_pbkdf.c:148 #, c-format msgid "Forced memory cost is too low for %s (minimum is %u kilobytes)." msgstr "" #: lib/utils_pbkdf.c:155 #, c-format msgid "Requested maximum PBKDF memory cost is too high (maximum is %d kilobytes)." msgstr "" #: lib/utils_pbkdf.c:160 msgid "Requested maximum PBKDF memory cannot be zero." msgstr "" #: lib/utils_pbkdf.c:164 msgid "Requested PBKDF parallel threads cannot be zero." msgstr "" #: lib/utils_pbkdf.c:184 msgid "Only PBKDF2 is supported in FIPS mode." msgstr "" #: lib/utils_benchmark.c:172 msgid "PBKDF benchmark disabled but iterations not set." msgstr "" #: lib/utils_benchmark.c:191 #, fuzzy, c-format #| msgid "Not compatible PBKDF2 options (using hash algorithm %s).\n" msgid "Not compatible PBKDF2 options (using hash algorithm %s)." msgstr "Gặp các tùy chọn PBKDF2 không tương thích (dùng thuật toán chuỗi duy nhất %s).\n" #: lib/utils_benchmark.c:211 #, fuzzy #| msgid "Not compatible PBKDF2 options (using hash algorithm %s).\n" msgid "Not compatible PBKDF options." msgstr "Gặp các tùy chọn PBKDF2 không tương thích (dùng thuật toán chuỗi duy nhất %s).\n" #: lib/utils_device_locking.c:102 #, c-format msgid "Locking aborted. The locking path %s/%s is unusable (not a directory or missing)." msgstr "" #: lib/utils_device_locking.c:109 #, c-format msgid "Locking directory %s/%s will be created with default compiled-in permissions." msgstr "" #: lib/utils_device_locking.c:119 #, c-format msgid "Locking aborted. The locking path %s/%s is unusable (%s is not a directory)." msgstr "" #: lib/utils_wipe.c:184 src/cryptsetup_reencrypt.c:959 #: src/cryptsetup_reencrypt.c:1043 #, fuzzy #| msgid "Cannot seek to device offset.\n" msgid "Cannot seek to device offset." msgstr "Không thể di chuyển vị trí tới vị trí tương đối thiết bị.\n" #: lib/utils_wipe.c:208 #, c-format msgid "Device wipe error, offset %." msgstr "" #: lib/luks1/keyencryption.c:39 #, fuzzy, c-format #| msgid "" #| "Failed to setup dm-crypt key mapping for device %s.\n" #| "Check that kernel supports %s cipher (check syslog for more info).\n" msgid "" "Failed to setup dm-crypt key mapping for device %s.\n" "Check that kernel supports %s cipher (check syslog for more info)." msgstr "" "Gặp lỗi khi cài đặt ánh xạ khóa dm-crypt cho thiết bị %s.\n" "Kiểm tra lại hạt nhân hỗ trợ mật mã %s (kiểu tra sổ theo dõi hệ thống để tìm thêm thông tin.)\n" #: lib/luks1/keyencryption.c:44 #, fuzzy #| msgid "Key size in XTS mode must be 256 or 512 bits.\n" msgid "Key size in XTS mode must be 256 or 512 bits." msgstr "Kích thước khóa trong chế độ “XTS” phải là 256 hay 512 bit.\n" #: lib/luks1/keyencryption.c:46 msgid "Cipher specification should be in [cipher]-[mode]-[iv] format." msgstr "" #: lib/luks1/keyencryption.c:97 lib/luks1/keymanage.c:344 #: lib/luks1/keymanage.c:642 lib/luks1/keymanage.c:1094 #: lib/luks2/luks2_json_metadata.c:1260 lib/luks2/luks2_keyslot.c:734 #, fuzzy, c-format #| msgid "Cannot write to device %s, permission denied.\n" msgid "Cannot write to device %s, permission denied." msgstr "Không thể ghi thiết bị %s, không đủ thẩm quyền.\n" #: lib/luks1/keyencryption.c:120 #, fuzzy #| msgid "Failed to open temporary keystore device.\n" msgid "Failed to open temporary keystore device." msgstr "Gặp lỗi khi mở thiết bị lưu trữ khóa tạm thời.\n" #: lib/luks1/keyencryption.c:127 #, fuzzy #| msgid "Failed to access temporary keystore device.\n" msgid "Failed to access temporary keystore device." msgstr "Gl khi truy cập đến thiết bị lưu trữ khóa tạm thời.\n" #: lib/luks1/keyencryption.c:200 lib/luks2/luks2_keyslot_luks2.c:60 #: lib/luks2/luks2_keyslot_luks2.c:78 lib/luks2/luks2_keyslot_reenc.c:134 #, fuzzy #| msgid "IO error while encrypting keyslot.\n" msgid "IO error while encrypting keyslot." msgstr "Lỗi IO (vào/ra) trong quá trình mã hóa khe khóa.\n" #: lib/luks1/keyencryption.c:246 lib/luks1/keymanage.c:347 #: lib/luks1/keymanage.c:595 lib/luks1/keymanage.c:645 lib/tcrypt/tcrypt.c:670 #: lib/verity/verity.c:81 lib/verity/verity.c:194 lib/verity/verity_hash.c:286 #: lib/verity/verity_hash.c:295 lib/verity/verity_hash.c:315 #: lib/verity/verity_fec.c:250 lib/verity/verity_fec.c:262 #: lib/verity/verity_fec.c:267 lib/luks2/luks2_json_metadata.c:1263 #: src/cryptsetup_reencrypt.c:218 src/cryptsetup_reencrypt.c:230 #, fuzzy, c-format #| msgid "Cannot open device %s.\n" msgid "Cannot open device %s." msgstr "Không thể mở thiết bị %s.\n" #: lib/luks1/keyencryption.c:257 lib/luks2/luks2_keyslot_luks2.c:137 #, fuzzy #| msgid "IO error while decrypting keyslot.\n" msgid "IO error while decrypting keyslot." msgstr "Lỗi IO (vào/ra) trong quá trình giải mã khe khóa.\n" #: lib/luks1/keymanage.c:110 #, fuzzy, c-format #| msgid "Device %s is too small. (LUKS requires at least % bytes.)\n" msgid "Device %s is too small. (LUKS1 requires at least % bytes.)" msgstr "Thiết bị %s quá nhỏ. (LUKS cần ít nhất % byte.)\n" #: lib/luks1/keymanage.c:131 lib/luks1/keymanage.c:139 #: lib/luks1/keymanage.c:151 lib/luks1/keymanage.c:162 #: lib/luks1/keymanage.c:174 #, fuzzy, c-format #| msgid "LUKS keyslot %u is invalid.\n" msgid "LUKS keyslot %u is invalid." msgstr "khe-khóa LUKS %u là không hợp lệ.\n" #: lib/luks1/keymanage.c:228 lib/luks1/keymanage.c:479 #: lib/luks2/luks2_json_metadata.c:1091 src/cryptsetup.c:1495 #: src/cryptsetup.c:1621 src/cryptsetup.c:1678 src/cryptsetup.c:1734 #: src/cryptsetup.c:1801 src/cryptsetup.c:1904 src/cryptsetup.c:1968 #: src/cryptsetup.c:2198 src/cryptsetup.c:2409 src/cryptsetup.c:2471 #: src/cryptsetup.c:2537 src/cryptsetup.c:2701 src/cryptsetup.c:3377 #: src/cryptsetup.c:3386 src/cryptsetup_reencrypt.c:1406 #, fuzzy, c-format #| msgid "Device %s is not a valid LUKS device.\n" msgid "Device %s is not a valid LUKS device." msgstr "Thiết bị %s không phải là một thiết bị kiểu LUKS đúng.\n" #: lib/luks1/keymanage.c:246 lib/luks2/luks2_json_metadata.c:1108 #, fuzzy, c-format #| msgid "Requested header backup file %s already exists.\n" msgid "Requested header backup file %s already exists." msgstr "Phần đầu tập tin sao lưu dự phòng đã yêu cầu %s đã sẵn có.\n" #: lib/luks1/keymanage.c:248 lib/luks2/luks2_json_metadata.c:1110 #, fuzzy, c-format #| msgid "Cannot create header backup file %s.\n" msgid "Cannot create header backup file %s." msgstr "Không thể tạo phần đầu của tập tin sao lưu dự phòng %s.\n" #: lib/luks1/keymanage.c:255 lib/luks2/luks2_json_metadata.c:1117 #, fuzzy, c-format #| msgid "Cannot write header backup file %s.\n" msgid "Cannot write header backup file %s." msgstr "Không thể ghi tập tin sao lưu phần đầu %s.\n" #: lib/luks1/keymanage.c:286 lib/luks2/luks2_json_metadata.c:1169 #, fuzzy #| msgid "Backup file doesn't contain valid LUKS header.\n" msgid "Backup file does not contain valid LUKS header." msgstr "Tập tin sao lưu không chứa phần đầu LUKS hợp lệ.\n" #: lib/luks1/keymanage.c:299 lib/luks1/keymanage.c:556 #: lib/luks2/luks2_json_metadata.c:1190 #, fuzzy, c-format #| msgid "Cannot open header backup file %s.\n" msgid "Cannot open header backup file %s." msgstr "Không mở được tập tin sao lưu phần đầu %s.\n" #: lib/luks1/keymanage.c:307 lib/luks2/luks2_json_metadata.c:1198 #, fuzzy, c-format #| msgid "Cannot read header backup file %s.\n" msgid "Cannot read header backup file %s." msgstr "Không đọc được tập tin sao lưu phần đầu %s.\n" #: lib/luks1/keymanage.c:317 #, fuzzy #| msgid "Data offset or key size differs on device and backup, restore failed.\n" msgid "Data offset or key size differs on device and backup, restore failed." msgstr "Khoảng bù dữ liệu hoặc kích cỡ khóa vẫn khác nhau trên thiết bị và bản sao lưu thì chức năng phục hồi bị lỗi.\n" #: lib/luks1/keymanage.c:325 #, c-format msgid "Device %s %s%s" msgstr "Thiết bị %s %s%s" #: lib/luks1/keymanage.c:326 msgid "does not contain LUKS header. Replacing header can destroy data on that device." msgstr "không chứa phần đầu LUKS. Thay thế phần đầu thì cũng có thể hủy dữ liệu trên thiết bị đó." #: lib/luks1/keymanage.c:327 msgid "already contains LUKS header. Replacing header will destroy existing keyslots." msgstr "đã chứa phần đầu LUKS. Thay thế phần đầu thì cũng hủy các khe khóa đã có." #: lib/luks1/keymanage.c:328 lib/luks2/luks2_json_metadata.c:1232 msgid "" "\n" "WARNING: real device header has different UUID than backup!" msgstr "" "\n" "CẢNH BÁO: phần đầu thiết bị thật có mã số “UUID” khác với bản sao lưu!" #: lib/luks1/keymanage.c:375 #, fuzzy #| msgid "Non standard key size, manual repair required.\n" msgid "Non standard key size, manual repair required." msgstr "Kích thước khóa không tiêu chuẩn, yêu cầu sửa chữa bằng tay.\n" #: lib/luks1/keymanage.c:385 #, fuzzy #| msgid "Non standard keyslots alignment, manual repair required.\n" msgid "Non standard keyslots alignment, manual repair required." msgstr "Không thể đồng chỉnh các khe khóa (keyslot) tiêu chuẩn, yêu cầu sửa chữa bằng tay.\n" #: lib/luks1/keymanage.c:397 #, fuzzy #| msgid "Repairing keyslots.\n" msgid "Repairing keyslots." msgstr "Đang chuẩn bị các khe khóa (keyslots).\n" #: lib/luks1/keymanage.c:416 #, fuzzy, c-format #| msgid "Keyslot %i: offset repaired (%u -> %u).\n" msgid "Keyslot %i: offset repaired (%u -> %u)." msgstr "Khe-khóa (keyslot) %i: khoảng bù (offset) được sửa chữa (%u -> %u).\n" #: lib/luks1/keymanage.c:424 #, fuzzy, c-format #| msgid "Keyslot %i: stripes repaired (%u -> %u).\n" msgid "Keyslot %i: stripes repaired (%u -> %u)." msgstr "Khe-khóa (keyslot) %i: stripes được sửa chữa (%u -> %u).\n" #: lib/luks1/keymanage.c:433 #, fuzzy, c-format #| msgid "Keyslot %i: bogus partition signature.\n" msgid "Keyslot %i: bogus partition signature." msgstr "Khe-khóa (keyslot) %i: chữ ký phân vùng không có thật.\n" #: lib/luks1/keymanage.c:438 #, fuzzy, c-format #| msgid "Keyslot %i: salt wiped.\n" msgid "Keyslot %i: salt wiped." msgstr "Khe-khóa (keyslot) %i: muối bị tẩy xóa.\n" #: lib/luks1/keymanage.c:455 #, fuzzy #| msgid "Writing LUKS header to disk.\n" msgid "Writing LUKS header to disk." msgstr "Đang ghi phần đầu của LUKS lên đĩa.\n" #: lib/luks1/keymanage.c:460 msgid "Repair failed." msgstr "Gặp lỗi khi sửa chữa." #: lib/luks1/keymanage.c:488 lib/luks1/keymanage.c:757 #, fuzzy, c-format #| msgid "Requested LUKS hash %s is not supported.\n" msgid "Requested LUKS hash %s is not supported." msgstr "Không hỗ trợ chuỗi duy nhất LUKS %s được yêu cầu.\n" #: lib/luks1/keymanage.c:516 src/cryptsetup.c:1188 #, fuzzy #| msgid "No known problems detected for LUKS header.\n" msgid "No known problems detected for LUKS header." msgstr "Không phát hiện thấy vấn đề với phần đầu LUKS.\n" #: lib/luks1/keymanage.c:667 #, fuzzy, c-format #| msgid "Error during update of LUKS header on device %s.\n" msgid "Error during update of LUKS header on device %s." msgstr "Gặp lỗi trong khi cập nhật phần đầu LUKS trên thiết bị %s.\n" #: lib/luks1/keymanage.c:675 #, fuzzy, c-format #| msgid "Error re-reading LUKS header after update on device %s.\n" msgid "Error re-reading LUKS header after update on device %s." msgstr "Gặp lỗi trong khi đọc lại phần đầu LUKS sau khi cập nhật trên thiết bị %s.\n" #: lib/luks1/keymanage.c:751 #, fuzzy #| msgid "Data offset for detached LUKS header must be either 0 or higher than header size (%d sectors).\n" msgid "Data offset for LUKS header must be either 0 or higher than header size." msgstr "Khoảng bù dữ liệu cho phần đầu LUKS tách rời phải hoặc là 0 hoặc là lớn hơn kích thước phần đầu (%d cung từ).\n" #: lib/luks1/keymanage.c:762 lib/luks1/keymanage.c:832 #: lib/luks2/luks2_json_format.c:284 lib/luks2/luks2_json_metadata.c:1009 #: src/cryptsetup.c:2864 #, fuzzy #| msgid "Wrong LUKS UUID format provided.\n" msgid "Wrong LUKS UUID format provided." msgstr "Đưa ra định dạng mã số UUID LUKS không đúng.\n" #: lib/luks1/keymanage.c:785 #, fuzzy #| msgid "Cannot create LUKS header: reading random salt failed.\n" msgid "Cannot create LUKS header: reading random salt failed." msgstr "Không thể tạo phần đầu LUKS: lỗi đọc salt ngẫu nhiên.\n" #: lib/luks1/keymanage.c:811 #, fuzzy, c-format #| msgid "Cannot create LUKS header: header digest failed (using hash %s).\n" msgid "Cannot create LUKS header: header digest failed (using hash %s)." msgstr "Không thể tạo phần đầu LUKS: lỗi tạo bản tóm tắt (dùng chuỗi duy nhất %s).\n" #: lib/luks1/keymanage.c:855 #, fuzzy, c-format #| msgid "Key slot %d active, purge first.\n" msgid "Key slot %d active, purge first." msgstr "Khe khóa %d vẫn hoạt động: cần tẩy trước.\n" #: lib/luks1/keymanage.c:861 #, fuzzy, c-format #| msgid "Key slot %d material includes too few stripes. Header manipulation?\n" msgid "Key slot %d material includes too few stripes. Header manipulation?" msgstr "Nguyên liệu khe khóa %d gồm có quá ít sọc. Có nên thao tác phần đầu không?\n" #: lib/luks1/keymanage.c:1002 #, fuzzy, c-format #| msgid "Key processing error (using hash %s).\n" msgid "Cannot open keyslot (using hash %s)." msgstr "Lỗi xử lý khóa (dùng mã băm %s).\n" #: lib/luks1/keymanage.c:1080 #, fuzzy, c-format #| msgid "Key slot %d is invalid, please select keyslot between 0 and %d.\n" msgid "Key slot %d is invalid, please select keyslot between 0 and %d." msgstr "Khe khóa %d không đúng: hãy chọn khe khóa trong phạm vi 0 đến %d.\n" #: lib/luks1/keymanage.c:1098 lib/luks2/luks2_keyslot.c:738 #, fuzzy, c-format #| msgid "Cannot wipe device %s.\n" msgid "Cannot wipe device %s." msgstr "Không thể tẩy thiết bị %s.\n" #: lib/loopaes/loopaes.c:146 #, fuzzy #| msgid "Detected not yet supported GPG encrypted keyfile.\n" msgid "Detected not yet supported GPG encrypted keyfile." msgstr "Tìm thấy tập tin khóa mã hóa GPG vẫn chưa được hỗ trợ.\n" #: lib/loopaes/loopaes.c:147 msgid "Please use gpg --decrypt | cryptsetup --keyfile=- ...\n" msgstr "Hãy dùng gpg --decrypt | cryptsetup --keyfile=- …\n" #: lib/loopaes/loopaes.c:168 lib/loopaes/loopaes.c:188 #, fuzzy #| msgid "Incompatible loop-AES keyfile detected.\n" msgid "Incompatible loop-AES keyfile detected." msgstr "Tập tin khóa (keyfile) loop-AES không tương thích được tìm thấy.\n" #: lib/loopaes/loopaes.c:245 #, fuzzy #| msgid "Kernel doesn't support loop-AES compatible mapping.\n" msgid "Kernel does not support loop-AES compatible mapping." msgstr "Nhân không hỗ trợ ánh xạ tương thích loop-AES.\n" #: lib/tcrypt/tcrypt.c:504 #, fuzzy, c-format #| msgid "Error reading keyfile %s.\n" msgid "Error reading keyfile %s." msgstr "Gặp lỗi khi đọc tập-tin khóa %s.\n" #: lib/tcrypt/tcrypt.c:554 #, fuzzy, c-format #| msgid "Maximum TCRYPT passphrase length (%d) exceeded.\n" msgid "Maximum TCRYPT passphrase length (%zu) exceeded." msgstr "Độ dài cụm từ mật khẩu TCRYPT tối đa (%d) đã bị vượt quá.\n" #: lib/tcrypt/tcrypt.c:595 #, fuzzy, c-format #| msgid "PBKDF2 hash algorithm %s not available, skipping.\n" msgid "PBKDF2 hash algorithm %s not available, skipping." msgstr "Thuật toán băm PBKDF2 không khả dụng %s, bỏ qua.\n" #: lib/tcrypt/tcrypt.c:611 src/cryptsetup.c:1059 #, fuzzy #| msgid "Required kernel crypto interface not available.\n" msgid "Required kernel crypto interface not available." msgstr "Giao diện mã hóa từ nhân đã yêu cầu không khả dụng.\n" #: lib/tcrypt/tcrypt.c:613 src/cryptsetup.c:1061 #, fuzzy #| msgid "Ensure you have algif_skcipher kernel module loaded.\n" msgid "Ensure you have algif_skcipher kernel module loaded." msgstr "Bạn cần chắc chắn là mô-đun nhân algif_skcipher đã được tải.\n" #: lib/tcrypt/tcrypt.c:753 #, fuzzy, c-format #| msgid "Activation is not supported for %d sector size.\n" msgid "Activation is not supported for %d sector size." msgstr "Hoạt hóa không được hỗ trợ cho kích thước cung %d.\n" #: lib/tcrypt/tcrypt.c:759 #, fuzzy #| msgid "Kernel doesn't support activation for this TCRYPT legacy mode.\n" msgid "Kernel does not support activation for this TCRYPT legacy mode." msgstr "Nhân không hỗ trợ hoạt hóa cho chế độ cũ của TCRYPT.\n" #: lib/tcrypt/tcrypt.c:790 #, fuzzy, c-format #| msgid "Activating TCRYPT system encryption for partition %s.\n" msgid "Activating TCRYPT system encryption for partition %s." msgstr "Đang kích hoạt mã hóa hệ thống TCRYPT cho phân vùng %s.\n" #: lib/tcrypt/tcrypt.c:868 #, fuzzy #| msgid "Kernel doesn't support TCRYPT compatible mapping.\n" msgid "Kernel does not support TCRYPT compatible mapping." msgstr "Nhân không hỗ trợ ánh xạ tương thích TCRYPT.\n" #: lib/tcrypt/tcrypt.c:1090 msgid "This function is not supported without TCRYPT header load." msgstr "Chức năng này không được hỗ trợ mà không có phần tải đầu TCRYPT." #: lib/bitlk/bitlk.c:350 #, c-format msgid "Unexpected metadata entry type '%u' found when parsing supported Volume Master Key." msgstr "" #: lib/bitlk/bitlk.c:397 msgid "Invalid string found when parsing Volume Master Key." msgstr "" #: lib/bitlk/bitlk.c:402 #, c-format msgid "Unexpected string ('%s') found when parsing supported Volume Master Key." msgstr "" #: lib/bitlk/bitlk.c:419 #, c-format msgid "Unexpected metadata entry value '%u' found when parsing supported Volume Master Key." msgstr "" #: lib/bitlk/bitlk.c:502 #, fuzzy, c-format #| msgid "Failed to read from key storage.\n" msgid "Failed to read BITLK signature from %s." msgstr "Lỗi đọc từ kho lưu khóa.\n" #: lib/bitlk/bitlk.c:514 msgid "Invalid or unknown signature for BITLK device." msgstr "" #: lib/bitlk/bitlk.c:520 msgid "BITLK version 1 is currently not supported." msgstr "" #: lib/bitlk/bitlk.c:526 msgid "Invalid or unknown boot signature for BITLK device." msgstr "" #: lib/bitlk/bitlk.c:538 #, fuzzy, c-format #| msgid "Unsupported LUKS version %d.\n" msgid "Unsupported sector size %." msgstr "Phiên bản LUKS không được hỗ trợ %d.\n" #: lib/bitlk/bitlk.c:546 #, fuzzy, c-format #| msgid "Failed to read from key storage.\n" msgid "Failed to read BITLK header from %s." msgstr "Lỗi đọc từ kho lưu khóa.\n" #: lib/bitlk/bitlk.c:571 #, c-format msgid "Failed to read BITLK FVE metadata from %s." msgstr "" #: lib/bitlk/bitlk.c:622 #, fuzzy #| msgid "UUID is not supported for this crypt type.\n" msgid "Unknown or unsupported encryption type." msgstr "UUID không hỗ trợ kiểu mã hóa này.\n" #: lib/bitlk/bitlk.c:655 #, c-format msgid "Failed to read BITLK metadata entries from %s." msgstr "" #: lib/bitlk/bitlk.c:897 #, c-format msgid "Unexpected metadata entry type '%u' found when parsing external key." msgstr "" #: lib/bitlk/bitlk.c:912 #, c-format msgid "Unexpected metadata entry value '%u' found when parsing external key." msgstr "" #: lib/bitlk/bitlk.c:980 msgid "Unexpected metadata entry found when parsing startup key." msgstr "" #: lib/bitlk/bitlk.c:1071 #, fuzzy #| msgid "This operation is not supported for %s crypt device.\n" msgid "This operation is not supported." msgstr "Thao tác này không được hỗ trợ cho thiết bị mã hóa %s.\n" #: lib/bitlk/bitlk.c:1079 msgid "Unexpected key data size." msgstr "" #: lib/bitlk/bitlk.c:1133 msgid "This BITLK device is in an unsupported state and cannot be activated." msgstr "" #: lib/bitlk/bitlk.c:1139 #, c-format msgid "BITLK devices with type '%s' cannot be activated." msgstr "" #: lib/bitlk/bitlk.c:1234 msgid "Activation of partially decrypted BITLK device is not supported." msgstr "" #: lib/bitlk/bitlk.c:1370 msgid "Cannot activate device, kernel dm-crypt is missing support for BITLK IV." msgstr "" #: lib/bitlk/bitlk.c:1374 msgid "Cannot activate device, kernel dm-crypt is missing support for BITLK Elephant diffuser." msgstr "" #: lib/verity/verity.c:69 lib/verity/verity.c:180 #, fuzzy, c-format #| msgid "Verity device %s doesn't use on-disk header.\n" msgid "Verity device %s does not use on-disk header." msgstr "Thiết bị xác thực %s không sử dụng phần đầu on-disk.\n" #: lib/verity/verity.c:91 #, fuzzy, c-format #| msgid "Device %s is not a valid VERITY device.\n" msgid "Device %s is not a valid VERITY device." msgstr "Thiết bị %s không phải là thiết bị VERITY thích hợp.\n" #: lib/verity/verity.c:98 #, fuzzy, c-format #| msgid "Unsupported VERITY version %d.\n" msgid "Unsupported VERITY version %d." msgstr "Không hỗ trợ phiên bản VERITY %d.\n" #: lib/verity/verity.c:129 #, fuzzy #| msgid "VERITY header corrupted.\n" msgid "VERITY header corrupted." msgstr "phần đầu VERITY sai hỏng.\n" #: lib/verity/verity.c:174 #, fuzzy, c-format #| msgid "Wrong VERITY UUID format provided on device %s.\n" msgid "Wrong VERITY UUID format provided on device %s." msgstr "Đưa ra định dạng mã số VERITY không đúng trên thiết bị %s.\n" #: lib/verity/verity.c:218 #, fuzzy, c-format #| msgid "Error during update of verity header on device %s.\n" msgid "Error during update of verity header on device %s." msgstr "Gặp lỗi trong khi cập nhật phần đầu xác thực trên thiết bị %s.\n" #: lib/verity/verity.c:276 #, fuzzy #| msgid "Hash algorithm %s not supported.\n" msgid "Root hash signature verification is not supported." msgstr "Thuật toán băm %s không được hỗ trợ.\n" #: lib/verity/verity.c:288 msgid "Errors cannot be repaired with FEC device." msgstr "" #: lib/verity/verity.c:290 #, c-format msgid "Found %u repairable errors with FEC device." msgstr "" #: lib/verity/verity.c:333 #, fuzzy #| msgid "Kernel doesn't support dm-verity mapping.\n" msgid "Kernel does not support dm-verity mapping." msgstr "Nhân không hỗ trợ ánh xạ dm-verity.\n" #: lib/verity/verity.c:337 #, fuzzy #| msgid "Kernel doesn't support dm-verity mapping.\n" msgid "Kernel does not support dm-verity signature option." msgstr "Nhân không hỗ trợ ánh xạ dm-verity.\n" #: lib/verity/verity.c:348 #, fuzzy #| msgid "Verity device detected corruption after activation.\n" msgid "Verity device detected corruption after activation." msgstr "Thiết bị xác thực đã được phát hiện sai hỏng sau khi hoạt hóa.\n" #: lib/verity/verity_hash.c:59 #, fuzzy, c-format #| msgid "Spare area is not zeroed at position %.\n" msgid "Spare area is not zeroed at position %." msgstr "Vùng để dành không được điền đầy bằng số không tại vị trí %.\n" #: lib/verity/verity_hash.c:154 lib/verity/verity_hash.c:266 #: lib/verity/verity_hash.c:277 #, fuzzy #| msgid "Device offset overflow.\n" msgid "Device offset overflow." msgstr "Khoảng bù (offset) thiết bị bị tràn.\n" #: lib/verity/verity_hash.c:194 #, fuzzy, c-format #| msgid "Verification failed at position %.\n" msgid "Verification failed at position %." msgstr "Thẩm tra gặp lỗi tại vị trí %.\n" #: lib/verity/verity_hash.c:273 msgid "Hash area overflow." msgstr "" #: lib/verity/verity_hash.c:346 #, fuzzy #| msgid "Verification of data area failed.\n" msgid "Verification of data area failed." msgstr "Việc thẩm tra vùng dữ liệu gặp lỗi.\n" #: lib/verity/verity_hash.c:351 #, fuzzy #| msgid "Verification of root hash failed.\n" msgid "Verification of root hash failed." msgstr "Việc thẩm tra mã băm gốc gặp lỗi.\n" #: lib/verity/verity_hash.c:357 #, fuzzy #| msgid "Input/output error while creating hash area.\n" msgid "Input/output error while creating hash area." msgstr "Lỗi Vào/Ra trong khi đang tạo vùng băm.\n" #: lib/verity/verity_hash.c:359 #, fuzzy #| msgid "Creation of hash area failed.\n" msgid "Creation of hash area failed." msgstr "Việc tạo vùng dữ liệu băm gặp lỗi.\n" #: lib/verity/verity_hash.c:394 #, fuzzy, c-format #| msgid "WARNING: Kernel cannot activate device if data block size exceeds page size (%u).\n" msgid "WARNING: Kernel cannot activate device if data block size exceeds page size (%u)." msgstr "CẢNH BÁO: Nhân (kernel) không thể kích hoạt thiết bị nếu kích thước khối dữ liệu vượt quá kích cỡ trang (%u).\n" #: lib/verity/verity_fec.c:131 msgid "Failed to allocate RS context." msgstr "" #: lib/verity/verity_fec.c:149 #, fuzzy #| msgid "Failed to stat key file.\n" msgid "Failed to allocate buffer." msgstr "Gặp lỗi khi lấy thông tin tập tin khóa.\n" #: lib/verity/verity_fec.c:159 #, c-format msgid "Failed to read RS block % byte %d." msgstr "" #: lib/verity/verity_fec.c:172 #, c-format msgid "Failed to read parity for RS block %." msgstr "" #: lib/verity/verity_fec.c:180 #, c-format msgid "Failed to repair parity for block %." msgstr "" #: lib/verity/verity_fec.c:191 #, c-format msgid "Failed to write parity for RS block %." msgstr "" #: lib/verity/verity_fec.c:227 msgid "Block sizes must match for FEC." msgstr "" #: lib/verity/verity_fec.c:233 msgid "Invalid number of parity bytes." msgstr "" #: lib/verity/verity_fec.c:238 msgid "Invalid FEC segment length." msgstr "" #: lib/verity/verity_fec.c:302 #, fuzzy, c-format #| msgid "Failed to open temporary keystore device.\n" msgid "Failed to determine size for device %s." msgstr "Gặp lỗi khi mở thiết bị lưu trữ khóa tạm thời.\n" #: lib/integrity/integrity.c:272 lib/integrity/integrity.c:355 #, fuzzy #| msgid "Kernel doesn't support dm-verity mapping.\n" msgid "Kernel does not support dm-integrity mapping." msgstr "Nhân không hỗ trợ ánh xạ dm-verity.\n" #: lib/integrity/integrity.c:278 #, fuzzy #| msgid "Kernel doesn't support dm-verity mapping.\n" msgid "Kernel does not support dm-integrity fixed metadata alignment." msgstr "Nhân không hỗ trợ ánh xạ dm-verity.\n" #: lib/integrity/integrity.c:287 msgid "Kernel refuses to activate insecure recalculate option (see legacy activation options to override)." msgstr "" #: lib/luks2/luks2_disk_metadata.c:383 lib/luks2/luks2_json_metadata.c:967 #: lib/luks2/luks2_json_metadata.c:1252 #, fuzzy, c-format #| msgid "Failed to access temporary keystore device.\n" msgid "Failed to acquire write lock on device %s." msgstr "Gl khi truy cập đến thiết bị lưu trữ khóa tạm thời.\n" #: lib/luks2/luks2_disk_metadata.c:392 msgid "Detected attempt for concurrent LUKS2 metadata update. Aborting operation." msgstr "" #: lib/luks2/luks2_disk_metadata.c:691 lib/luks2/luks2_disk_metadata.c:712 msgid "" "Device contains ambiguous signatures, cannot auto-recover LUKS2.\n" "Please run \"cryptsetup repair\" for recovery." msgstr "" #: lib/luks2/luks2_json_format.c:227 #, fuzzy #| msgid "Device %s is too small.\n" msgid "Requested data offset is too small." msgstr "Thiết bị %s có kích cỡ quá nhỏ.\n" #: lib/luks2/luks2_json_format.c:272 #, c-format msgid "WARNING: keyslots area (% bytes) is very small, available LUKS2 keyslot count is very limited.\n" msgstr "" #: lib/luks2/luks2_json_metadata.c:954 lib/luks2/luks2_json_metadata.c:1082 #: lib/luks2/luks2_json_metadata.c:1158 lib/luks2/luks2_keyslot_luks2.c:92 #: lib/luks2/luks2_keyslot_luks2.c:114 #, fuzzy, c-format #| msgid "Failed to access temporary keystore device.\n" msgid "Failed to acquire read lock on device %s." msgstr "Gl khi truy cập đến thiết bị lưu trữ khóa tạm thời.\n" #: lib/luks2/luks2_json_metadata.c:1175 #, c-format msgid "Forbidden LUKS2 requirements detected in backup %s." msgstr "" #: lib/luks2/luks2_json_metadata.c:1216 #, fuzzy #| msgid "Data offset or key size differs on device and backup, restore failed.\n" msgid "Data offset differ on device and backup, restore failed." msgstr "Khoảng bù dữ liệu hoặc kích cỡ khóa vẫn khác nhau trên thiết bị và bản sao lưu thì chức năng phục hồi bị lỗi.\n" #: lib/luks2/luks2_json_metadata.c:1222 #, fuzzy #| msgid "Data offset or key size differs on device and backup, restore failed.\n" msgid "Binary header with keyslot areas size differ on device and backup, restore failed." msgstr "Khoảng bù dữ liệu hoặc kích cỡ khóa vẫn khác nhau trên thiết bị và bản sao lưu thì chức năng phục hồi bị lỗi.\n" #: lib/luks2/luks2_json_metadata.c:1229 #, fuzzy, c-format #| msgid "Device %s %s%s" msgid "Device %s %s%s%s%s" msgstr "Thiết bị %s %s%s" #: lib/luks2/luks2_json_metadata.c:1230 #, fuzzy #| msgid "does not contain LUKS header. Replacing header can destroy data on that device." msgid "does not contain LUKS2 header. Replacing header can destroy data on that device." msgstr "không chứa phần đầu LUKS. Thay thế phần đầu thì cũng có thể hủy dữ liệu trên thiết bị đó." #: lib/luks2/luks2_json_metadata.c:1231 #, fuzzy #| msgid "already contains LUKS header. Replacing header will destroy existing keyslots." msgid "already contains LUKS2 header. Replacing header will destroy existing keyslots." msgstr "đã chứa phần đầu LUKS. Thay thế phần đầu thì cũng hủy các khe khóa đã có." #: lib/luks2/luks2_json_metadata.c:1233 msgid "" "\n" "WARNING: unknown LUKS2 requirements detected in real device header!\n" "Replacing header with backup may corrupt the data on that device!" msgstr "" #: lib/luks2/luks2_json_metadata.c:1235 msgid "" "\n" "WARNING: Unfinished offline reencryption detected on the device!\n" "Replacing header with backup may corrupt data." msgstr "" #: lib/luks2/luks2_json_metadata.c:1333 #, c-format msgid "Ignored unknown flag %s." msgstr "" #: lib/luks2/luks2_json_metadata.c:2020 lib/luks2/luks2_reencrypt.c:1746 #, c-format msgid "Missing key for dm-crypt segment %u" msgstr "" #: lib/luks2/luks2_json_metadata.c:2032 lib/luks2/luks2_reencrypt.c:1764 #, fuzzy #| msgid "Failed to stat key file.\n" msgid "Failed to set dm-crypt segment." msgstr "Gặp lỗi khi lấy thông tin tập tin khóa.\n" #: lib/luks2/luks2_json_metadata.c:2038 lib/luks2/luks2_reencrypt.c:1770 msgid "Failed to set dm-linear segment." msgstr "" #: lib/luks2/luks2_json_metadata.c:2165 msgid "Unsupported device integrity configuration." msgstr "" #: lib/luks2/luks2_json_metadata.c:2251 msgid "Reencryption in-progress. Cannot deactivate device." msgstr "" #: lib/luks2/luks2_json_metadata.c:2262 lib/luks2/luks2_reencrypt.c:3206 #, c-format msgid "Failed to replace suspended device %s with dm-error target." msgstr "" #: lib/luks2/luks2_json_metadata.c:2342 msgid "Failed to read LUKS2 requirements." msgstr "" #: lib/luks2/luks2_json_metadata.c:2349 msgid "Unmet LUKS2 requirements detected." msgstr "" #: lib/luks2/luks2_json_metadata.c:2357 msgid "Operation incompatible with device marked for legacy reencryption. Aborting." msgstr "" #: lib/luks2/luks2_json_metadata.c:2359 msgid "Operation incompatible with device marked for LUKS2 reencryption. Aborting." msgstr "" #: lib/luks2/luks2_keyslot.c:547 lib/luks2/luks2_keyslot.c:584 msgid "Not enough available memory to open a keyslot." msgstr "" #: lib/luks2/luks2_keyslot.c:549 lib/luks2/luks2_keyslot.c:586 #, fuzzy #| msgid "Key slot %d verified.\n" msgid "Keyslot open failed." msgstr "Khe khóa %d được thẩm định.\n" #: lib/luks2/luks2_keyslot_luks2.c:53 lib/luks2/luks2_keyslot_luks2.c:108 #, c-format msgid "Cannot use %s-%s cipher for keyslot encryption." msgstr "" #: lib/luks2/luks2_keyslot_luks2.c:480 #, fuzzy #| msgid "Failed to swap new key slot.\n" msgid "No space for new keyslot." msgstr "Gặp lỗi khi hoán đổi khe khóa mới.\n" #: lib/luks2/luks2_luks1_convert.c:482 #, fuzzy, c-format #| msgid "Cannot check password quality: %s\n" msgid "Cannot check status of device with uuid: %s." msgstr "Không thể kiểm tra chất lượng mật khẩu: %s\n" #: lib/luks2/luks2_luks1_convert.c:508 msgid "Unable to convert header with LUKSMETA additional metadata." msgstr "" #: lib/luks2/luks2_luks1_convert.c:548 msgid "Unable to move keyslot area. Not enough space." msgstr "" #: lib/luks2/luks2_luks1_convert.c:599 msgid "Unable to move keyslot area. LUKS2 keyslots area too small." msgstr "" #: lib/luks2/luks2_luks1_convert.c:605 lib/luks2/luks2_luks1_convert.c:889 #, fuzzy #| msgid "Failed to open key file.\n" msgid "Unable to move keyslot area." msgstr "Gặp lỗi khi mở tập tin khóa.\n" #: lib/luks2/luks2_luks1_convert.c:697 msgid "Cannot convert to LUKS1 format - default segment encryption sector size is not 512 bytes." msgstr "" #: lib/luks2/luks2_luks1_convert.c:705 msgid "Cannot convert to LUKS1 format - key slot digests are not LUKS1 compatible." msgstr "" #: lib/luks2/luks2_luks1_convert.c:717 #, c-format msgid "Cannot convert to LUKS1 format - device uses wrapped key cipher %s." msgstr "" #: lib/luks2/luks2_luks1_convert.c:725 #, c-format msgid "Cannot convert to LUKS1 format - LUKS2 header contains %u token(s)." msgstr "" #: lib/luks2/luks2_luks1_convert.c:739 #, c-format msgid "Cannot convert to LUKS1 format - keyslot %u is in invalid state." msgstr "" #: lib/luks2/luks2_luks1_convert.c:744 #, c-format msgid "Cannot convert to LUKS1 format - slot %u (over maximum slots) is still active." msgstr "" #: lib/luks2/luks2_luks1_convert.c:749 #, c-format msgid "Cannot convert to LUKS1 format - keyslot %u is not LUKS1 compatible." msgstr "" #: lib/luks2/luks2_reencrypt.c:892 #, c-format msgid "Hotzone size must be multiple of calculated zone alignment (%zu bytes)." msgstr "" #: lib/luks2/luks2_reencrypt.c:897 #, fuzzy, c-format #| msgid "Reduce size must be multiple of 512 bytes sector." msgid "Device size must be multiple of calculated zone alignment (%zu bytes)." msgstr "Kích cỡ giảm phải là bội số cung từ (sector) 512 byte" #: lib/luks2/luks2_reencrypt.c:941 #, fuzzy, c-format #| msgid "Unsupported LUKS version %d.\n" msgid "Unsupported resilience mode %s" msgstr "Phiên bản LUKS không được hỗ trợ %d.\n" #: lib/luks2/luks2_reencrypt.c:1158 lib/luks2/luks2_reencrypt.c:1313 #: lib/luks2/luks2_reencrypt.c:1396 lib/luks2/luks2_reencrypt.c:1430 #: lib/luks2/luks2_reencrypt.c:3046 #, fuzzy #| msgid "Failed to write to key storage.\n" msgid "Failed to initialize old segment storage wrapper." msgstr "Lỗi ghi khóa vào kho lưu khóa.\n" #: lib/luks2/luks2_reencrypt.c:1172 lib/luks2/luks2_reencrypt.c:1291 #, fuzzy #| msgid "Failed to write to key storage.\n" msgid "Failed to initialize new segment storage wrapper." msgstr "Lỗi ghi khóa vào kho lưu khóa.\n" #: lib/luks2/luks2_reencrypt.c:1340 #, fuzzy #| msgid "Failed to read from key storage.\n" msgid "Failed to read checksums for current hotzone." msgstr "Lỗi đọc từ kho lưu khóa.\n" #: lib/luks2/luks2_reencrypt.c:1347 lib/luks2/luks2_reencrypt.c:3054 #, fuzzy, c-format #| msgid "Spare area is not zeroed at position %.\n" msgid "Failed to read hotzone area starting at %." msgstr "Vùng để dành không được điền đầy bằng số không tại vị trí %.\n" #: lib/luks2/luks2_reencrypt.c:1366 #, fuzzy, c-format #| msgid "Failed to read from key storage.\n" msgid "Failed to decrypt sector %zu." msgstr "Lỗi đọc từ kho lưu khóa.\n" #: lib/luks2/luks2_reencrypt.c:1372 #, fuzzy, c-format #| msgid "Failed to write to key storage.\n" msgid "Failed to recover sector %zu." msgstr "Lỗi ghi khóa vào kho lưu khóa.\n" #: lib/luks2/luks2_reencrypt.c:1867 #, c-format msgid "Source and target device sizes don't match. Source %, target: %." msgstr "" #: lib/luks2/luks2_reencrypt.c:1965 #, fuzzy, c-format #| msgid "Failed to access temporary keystore device.\n" msgid "Failed to activate hotzone device %s." msgstr "Gl khi truy cập đến thiết bị lưu trữ khóa tạm thời.\n" #: lib/luks2/luks2_reencrypt.c:1982 #, c-format msgid "Failed to activate overlay device %s with actual origin table." msgstr "" #: lib/luks2/luks2_reencrypt.c:1989 #, fuzzy, c-format #| msgid "Failed to open temporary keystore device.\n" msgid "Failed to load new mapping for device %s." msgstr "Gặp lỗi khi mở thiết bị lưu trữ khóa tạm thời.\n" #: lib/luks2/luks2_reencrypt.c:2060 msgid "Failed to refresh reencryption devices stack." msgstr "" #: lib/luks2/luks2_reencrypt.c:2216 #, fuzzy #| msgid "Failed to swap new key slot.\n" msgid "Failed to set new keyslots area size." msgstr "Gặp lỗi khi hoán đổi khe khóa mới.\n" #: lib/luks2/luks2_reencrypt.c:2320 #, c-format msgid "Data shift is not aligned to requested encryption sector size (% bytes)." msgstr "" #: lib/luks2/luks2_reencrypt.c:2341 #, c-format msgid "Data device is not aligned to requested encryption sector size (% bytes)." msgstr "" #: lib/luks2/luks2_reencrypt.c:2362 #, c-format msgid "Data shift (% sectors) is less than future data offset (% sectors)." msgstr "" #: lib/luks2/luks2_reencrypt.c:2368 lib/luks2/luks2_reencrypt.c:2795 #: lib/luks2/luks2_reencrypt.c:2816 #, fuzzy, c-format #| msgid "Cannot use device %s which is in use (already mapped or mounted).\n" msgid "Failed to open %s in exclusive mode (already mapped or mounted)." msgstr "Không thể sử dụng thiết bị %s mà nó lại đang được sử dụng (đang được ánh xạ hoặc gắn).\n" #: lib/luks2/luks2_reencrypt.c:2536 #, fuzzy #| msgid "Do not change key, no data area reencryption." msgid "Device not marked for LUKS2 reencryption." msgstr "Khôngười thay đổi khóa, không có mã hóa lại vùng dữ liệu." #: lib/luks2/luks2_reencrypt.c:2542 lib/luks2/luks2_reencrypt.c:3311 msgid "Failed to load LUKS2 reencryption context." msgstr "" #: lib/luks2/luks2_reencrypt.c:2621 #, fuzzy #| msgid "Failed to write to key storage.\n" msgid "Failed to get reencryption state." msgstr "Lỗi ghi khóa vào kho lưu khóa.\n" #: lib/luks2/luks2_reencrypt.c:2625 #, fuzzy #| msgid "Device %s is not active.\n" msgid "Device is not in reencryption." msgstr "Thiết bị %s không hoạt động.\n" #: lib/luks2/luks2_reencrypt.c:2632 msgid "Reencryption process is already running." msgstr "" #: lib/luks2/luks2_reencrypt.c:2634 #, fuzzy #| msgid "Cannot read reencryption log file.\n" msgid "Failed to acquire reencryption lock." msgstr "Không đọc được tập tin nhật ký reencryption.\n" #: lib/luks2/luks2_reencrypt.c:2652 msgid "Cannot proceed with reencryption. Run reencryption recovery first." msgstr "" #: lib/luks2/luks2_reencrypt.c:2766 msgid "Active device size and requested reencryption size don't match." msgstr "" #: lib/luks2/luks2_reencrypt.c:2780 msgid "Illegal device size requested in reencryption parameters." msgstr "" #: lib/luks2/luks2_reencrypt.c:2850 msgid "Reencryption in-progress. Cannot perform recovery." msgstr "" #: lib/luks2/luks2_reencrypt.c:2922 msgid "LUKS2 reencryption already initialized in metadata." msgstr "" #: lib/luks2/luks2_reencrypt.c:2929 msgid "Failed to initialize LUKS2 reencryption in metadata." msgstr "" #: lib/luks2/luks2_reencrypt.c:3020 msgid "Failed to set device segments for next reencryption hotzone." msgstr "" #: lib/luks2/luks2_reencrypt.c:3062 #, fuzzy #| msgid "Cannot write reencryption log file.\n" msgid "Failed to write reencryption resilience metadata." msgstr "Không thể ghi tập tin nhật ký reencryption (mã hóa lại).\n" #: lib/luks2/luks2_reencrypt.c:3069 #, fuzzy #| msgid "Repair failed." msgid "Decryption failed." msgstr "Gặp lỗi khi sửa chữa." #: lib/luks2/luks2_reencrypt.c:3074 #, fuzzy, c-format #| msgid "Failed to write to key storage.\n" msgid "Failed to write hotzone area starting at %." msgstr "Lỗi ghi khóa vào kho lưu khóa.\n" #: lib/luks2/luks2_reencrypt.c:3079 #, fuzzy #| msgid "Failed to stat key file.\n" msgid "Failed to sync data." msgstr "Gặp lỗi khi lấy thông tin tập tin khóa.\n" #: lib/luks2/luks2_reencrypt.c:3087 msgid "Failed to update metadata after current reencryption hotzone completed." msgstr "" #: lib/luks2/luks2_reencrypt.c:3154 #, fuzzy #| msgid "Failed to write to key storage.\n" msgid "Failed to write LUKS2 metadata." msgstr "Lỗi ghi khóa vào kho lưu khóa.\n" #: lib/luks2/luks2_reencrypt.c:3177 msgid "Failed to wipe backup segment data." msgstr "" #: lib/luks2/luks2_reencrypt.c:3190 msgid "Failed to disable reencryption requirement flag." msgstr "" #: lib/luks2/luks2_reencrypt.c:3198 #, c-format msgid "Fatal error while reencrypting chunk starting at %, % sectors long." msgstr "" #: lib/luks2/luks2_reencrypt.c:3207 msgid "Do not resume the device unless replaced with error target manually." msgstr "" #: lib/luks2/luks2_reencrypt.c:3256 msgid "Cannot proceed with reencryption. Unexpected reencryption status." msgstr "" #: lib/luks2/luks2_reencrypt.c:3262 msgid "Missing or invalid reencrypt context." msgstr "" #: lib/luks2/luks2_reencrypt.c:3269 #, fuzzy #| msgid "Cannot initialize crypto backend.\n" msgid "Failed to initialize reencryption device stack." msgstr "Không thể khởi ứng dụng mã hóa chạy ở phía sau (backend).\n" #: lib/luks2/luks2_reencrypt.c:3288 lib/luks2/luks2_reencrypt.c:3324 #, fuzzy #| msgid "Cannot open reencryption log file.\n" msgid "Failed to update reencryption context." msgstr "Không mở được tập tin nhật ký reencryption.\n" #: lib/luks2/luks2_token.c:263 msgid "No free token slot." msgstr "" #: lib/luks2/luks2_token.c:270 #, fuzzy, c-format #| msgid "Failed to write to key storage.\n" msgid "Failed to create builtin token %s." msgstr "Lỗi ghi khóa vào kho lưu khóa.\n" #: src/cryptsetup.c:198 #, fuzzy #| msgid "Can't do passphrase verification on non-tty inputs.\n" msgid "Can't do passphrase verification on non-tty inputs." msgstr "Không thể thẩm tra cụm từ mật khẩu trên đầu vào khác TTY.\n" #: src/cryptsetup.c:261 #, fuzzy #| msgid "This operation is supported only for LUKS device.\n" msgid "Keyslot encryption parameters can be set only for LUKS2 device." msgstr "Thao tác này được hỗ trợ chỉ cho thiết bị LUKS.\n" #: src/cryptsetup.c:291 src/cryptsetup.c:1006 src/cryptsetup.c:1339 #: src/cryptsetup.c:3245 src/cryptsetup_reencrypt.c:741 #: src/cryptsetup_reencrypt.c:811 #, fuzzy #| msgid "No known cipher specification pattern detected.\n" msgid "No known cipher specification pattern detected." msgstr "Không phát hiện mẫu đặc tả mã hóa đã biết.\n" #: src/cryptsetup.c:299 msgid "WARNING: The --hash parameter is being ignored in plain mode with keyfile specified.\n" msgstr "CẢNH BÁO: Tham số --hash bị bỏ qua trong chế độ thường với tập tin khóa đã cho.\n" #: src/cryptsetup.c:307 msgid "WARNING: The --keyfile-size option is being ignored, the read size is the same as the encryption key size.\n" msgstr "CẢNH BÁO: Đang bỏ qua các tùy chọn kích thước tập-tin-khóa --keyfile-size --, kích thước đọc giống với kích thước khóa mã hóa.\n" #: src/cryptsetup.c:347 #, c-format msgid "Detected device signature(s) on %s. Proceeding further may damage existing data." msgstr "" #: src/cryptsetup.c:353 src/cryptsetup.c:1145 src/cryptsetup.c:1197 #: src/cryptsetup.c:1316 src/cryptsetup.c:1389 src/cryptsetup.c:2036 #: src/cryptsetup.c:2762 src/cryptsetup.c:2886 src/integritysetup.c:242 msgid "Operation aborted.\n" msgstr "" #: src/cryptsetup.c:421 #, fuzzy #| msgid "Option --key-file is required.\n" msgid "Option --key-file is required." msgstr "Cần tùy chọn “--key-file”.\n" #: src/cryptsetup.c:474 msgid "Enter VeraCrypt PIM: " msgstr "" #: src/cryptsetup.c:483 msgid "Invalid PIM value: parse error." msgstr "" #: src/cryptsetup.c:486 #, fuzzy #| msgid "Invalid device %s.\n" msgid "Invalid PIM value: 0." msgstr "Thiết bị không đúng %s.\n" #: src/cryptsetup.c:489 msgid "Invalid PIM value: outside of range." msgstr "" #: src/cryptsetup.c:512 #, fuzzy #| msgid "No device header detected with this passphrase.\n" msgid "No device header detected with this passphrase." msgstr "Không có phần đầu thiết bị cho cụm từ mật khẩu này.\n" #: src/cryptsetup.c:582 #, fuzzy, c-format #| msgid "Device %s is not a valid LUKS device.\n" msgid "Device %s is not a valid BITLK device." msgstr "Thiết bị %s không phải là một thiết bị kiểu LUKS đúng.\n" #: src/cryptsetup.c:617 msgid "" "Header dump with volume key is sensitive information\n" "which allows access to encrypted partition without passphrase.\n" "This dump should be always stored encrypted on safe place." msgstr "" "Đổ đống phần đầu với khóa vùng chứa là thông tin phân biệt hoa thường\n" "cái mà cho phép truy cập phân vùng được mã hóa mà không cần mật khẩu.\n" "Việc đổ đống này nên luôn được lưu trữ mã hóa tại một nơi an toàn." #: src/cryptsetup.c:714 #, c-format msgid "Device %s is still active and scheduled for deferred removal.\n" msgstr "" #: src/cryptsetup.c:742 msgid "Resize of active device requires volume key in keyring but --disable-keyring option is set." msgstr "" #: src/cryptsetup.c:885 #, fuzzy #| msgid "benchmark cipher" msgid "Benchmark interrupted." msgstr "đo kiểm tốc độ mã hóa" #: src/cryptsetup.c:906 #, c-format msgid "PBKDF2-%-9s N/A\n" msgstr "" #: src/cryptsetup.c:908 #, c-format msgid "PBKDF2-%-9s %7u iterations per second for %zu-bit key\n" msgstr "" #: src/cryptsetup.c:922 #, c-format msgid "%-10s N/A\n" msgstr "" #: src/cryptsetup.c:924 #, c-format msgid "%-10s %4u iterations, %5u memory, %1u parallel threads (CPUs) for %zu-bit key (requested %u ms time)\n" msgstr "" #: src/cryptsetup.c:948 #, fuzzy #| msgid "Result of benchmark is not reliable.\n" msgid "Result of benchmark is not reliable." msgstr "Kết quả đo kiểm không đáng tin cậy.\n" #: src/cryptsetup.c:998 msgid "# Tests are approximate using memory only (no storage IO).\n" msgstr "# Các kiểm tra là chỉ ước lượng việc sử dụng bộ nhớ (không tính IO ổ đĩa).\n" #. TRANSLATORS: The string is header of a table and must be exactly (right side) aligned. #: src/cryptsetup.c:1018 #, fuzzy, c-format #| msgid "# Algorithm | Key | Encryption | Decryption\n" msgid "#%*s Algorithm | Key | Encryption | Decryption\n" msgstr "# Thuật toán| Khóa| Mã hóa | Giải mã\n" #: src/cryptsetup.c:1022 #, fuzzy, c-format #| msgid "Cipher %s is not available.\n" msgid "Cipher %s (with %i bits key) is not available." msgstr "Mã hóa kiểu %s không sẵn có.\n" #. TRANSLATORS: The string is header of a table and must be exactly (right side) aligned. #: src/cryptsetup.c:1041 #, fuzzy #| msgid "# Algorithm | Key | Encryption | Decryption\n" msgid "# Algorithm | Key | Encryption | Decryption\n" msgstr "# Thuật toán| Khóa| Mã hóa | Giải mã\n" #: src/cryptsetup.c:1052 msgid "N/A" msgstr "N/A" #: src/cryptsetup.c:1138 msgid "" "Seems device does not require reencryption recovery.\n" "Do you want to proceed anyway?" msgstr "" #: src/cryptsetup.c:1144 msgid "Really proceed with LUKS2 reencryption recovery?" msgstr "" #: src/cryptsetup.c:1153 #, fuzzy #| msgid "Enter passphrase for key slot %u: " msgid "Enter passphrase for reencryption recovery: " msgstr "Gõ cụm từ mật khẩu cho khe khóa %u: " #: src/cryptsetup.c:1196 msgid "Really try to repair LUKS device header?" msgstr "Bạn có thực sự muốn thử sửa chữa phần đầu thiết bị LUKS không?" #: src/cryptsetup.c:1215 src/integritysetup.c:157 msgid "" "Wiping device to initialize integrity checksum.\n" "You can interrupt this by pressing CTRL+c (rest of not wiped device will contain invalid checksum).\n" msgstr "" #: src/cryptsetup.c:1237 src/integritysetup.c:179 #, fuzzy, c-format #| msgid "Cannot open temporary LUKS device.\n" msgid "Cannot deactivate temporary device %s." msgstr "Không thể r thiết bị LUKS tạm thời.\n" #: src/cryptsetup.c:1301 msgid "Integrity option can be used only for LUKS2 format." msgstr "" #: src/cryptsetup.c:1306 src/cryptsetup.c:1366 #, fuzzy #| msgid "Unsupported LUKS version %d.\n" msgid "Unsupported LUKS2 metadata size options." msgstr "Phiên bản LUKS không được hỗ trợ %d.\n" #: src/cryptsetup.c:1315 msgid "Header file does not exist, do you want to create it?" msgstr "" #: src/cryptsetup.c:1323 #, fuzzy, c-format #| msgid "Cannot create header backup file %s.\n" msgid "Cannot create header file %s." msgstr "Không thể tạo phần đầu của tập tin sao lưu dự phòng %s.\n" #: src/cryptsetup.c:1346 src/integritysetup.c:205 src/integritysetup.c:213 #: src/integritysetup.c:222 src/integritysetup.c:295 src/integritysetup.c:303 #: src/integritysetup.c:313 #, fuzzy #| msgid "No known cipher specification pattern detected.\n" msgid "No known integrity specification pattern detected." msgstr "Không phát hiện mẫu đặc tả mã hóa đã biết.\n" #: src/cryptsetup.c:1359 #, fuzzy, c-format #| msgid "Cannot use %s as on-disk header.\n" msgid "Cannot use %s as on-disk header." msgstr "Không thể sử dụng %s như là phần đầu on-disk.\n" #: src/cryptsetup.c:1383 src/integritysetup.c:236 #, c-format msgid "This will overwrite data on %s irrevocably." msgstr "Thao tác này sẽ ghi đè lên dữ liệu trên thiết bị %s một cách không phục hồi được." #: src/cryptsetup.c:1416 src/cryptsetup.c:1750 src/cryptsetup.c:1817 #: src/cryptsetup.c:1919 src/cryptsetup.c:1985 src/cryptsetup_reencrypt.c:571 #, fuzzy #| msgid "Failed to stat key file.\n" msgid "Failed to set pbkdf parameters." msgstr "Gặp lỗi khi lấy thông tin tập tin khóa.\n" #: src/cryptsetup.c:1501 #, fuzzy #| msgid "Reduced data offset is allowed only for detached LUKS header.\n" msgid "Reduced data offset is allowed only for detached LUKS header." msgstr "Giảm khoảng bù (offset) dữ liệu chỉ cho phép khi phần đầu LUKS được tách rời.\n" #: src/cryptsetup.c:1512 src/cryptsetup.c:1823 msgid "Cannot determine volume key size for LUKS without keyslots, please use --key-size option." msgstr "" #: src/cryptsetup.c:1550 msgid "Device activated but cannot make flags persistent." msgstr "" #: src/cryptsetup.c:1631 src/cryptsetup.c:1701 #, fuzzy, c-format #| msgid "Key slot %d selected for deletion.\n" msgid "Keyslot %d is selected for deletion." msgstr "Khe khóa %d đã được chọn để xóa.\n" #: src/cryptsetup.c:1643 src/cryptsetup.c:1704 msgid "This is the last keyslot. Device will become unusable after purging this key." msgstr "Đây là khe khóa cuối cùng. Sau khi tẩy khóa này thì thiết bị không dùng được." #: src/cryptsetup.c:1644 msgid "Enter any remaining passphrase: " msgstr "Gõ cụm từ mật khẩu bất kỳ còn lại: " #: src/cryptsetup.c:1645 src/cryptsetup.c:1706 msgid "Operation aborted, the keyslot was NOT wiped.\n" msgstr "" #: src/cryptsetup.c:1683 msgid "Enter passphrase to be deleted: " msgstr "Gõ cụm từ mật khẩu cần xóa: " #: src/cryptsetup.c:1764 src/cryptsetup.c:1838 src/cryptsetup.c:1872 msgid "Enter new passphrase for key slot: " msgstr "Gõ cụm từ mật khẩu mới cho khe khóa: " #: src/cryptsetup.c:1855 src/cryptsetup_reencrypt.c:1361 #, c-format msgid "Enter any existing passphrase: " msgstr "Hãy nhập mật khẩu bất kỳ sẵn có: " #: src/cryptsetup.c:1923 msgid "Enter passphrase to be changed: " msgstr "Gõ cụm từ mật khẩu cần được thay đổi: " #: src/cryptsetup.c:1939 src/cryptsetup_reencrypt.c:1347 msgid "Enter new passphrase: " msgstr "Gõ cụm từ mật khẩu mới: " #: src/cryptsetup.c:1989 #, fuzzy #| msgid "Enter passphrase for key slot %u: " msgid "Enter passphrase for keyslot to be converted: " msgstr "Gõ cụm từ mật khẩu cho khe khóa %u: " #: src/cryptsetup.c:2013 #, fuzzy #| msgid "Only one device argument for isLuks operation is supported.\n" msgid "Only one device argument for isLuks operation is supported." msgstr "Chỉ hỗ trợ một đối số thiết-bị dành cho thao tác isLuks.\n" #: src/cryptsetup.c:2063 #, fuzzy #| msgid "" #| "Header dump with volume key is sensitive information\n" #| "which allows access to encrypted partition without passphrase.\n" #| "This dump should be always stored encrypted on safe place." msgid "" "The header dump with volume key is sensitive information\n" "that allows access to encrypted partition without a passphrase.\n" "This dump should be stored encrypted in a safe place." msgstr "" "Đổ đống phần đầu với khóa vùng chứa là thông tin phân biệt hoa thường\n" "cái mà cho phép truy cập phân vùng được mã hóa mà không cần mật khẩu.\n" "Việc đổ đống này nên luôn được lưu trữ mã hóa tại một nơi an toàn." #: src/cryptsetup.c:2128 #, fuzzy, c-format #| msgid "Key slot %d is not used.\n" msgid "Keyslot %d does not contain unbound key." msgstr "Khe khóa %d không được dùng.\n" #: src/cryptsetup.c:2134 #, fuzzy #| msgid "" #| "Header dump with volume key is sensitive information\n" #| "which allows access to encrypted partition without passphrase.\n" #| "This dump should be always stored encrypted on safe place." msgid "" "The header dump with unbound key is sensitive information.\n" "This dump should be stored encrypted in a safe place." msgstr "" "Đổ đống phần đầu với khóa vùng chứa là thông tin phân biệt hoa thường\n" "cái mà cho phép truy cập phân vùng được mã hóa mà không cần mật khẩu.\n" "Việc đổ đống này nên luôn được lưu trữ mã hóa tại một nơi an toàn." #: src/cryptsetup.c:2223 src/cryptsetup.c:2252 #, fuzzy, c-format #| msgid "show active device status" msgid "%s is not active %s device name." msgstr "hiển thị trạng thái các thiết bị đang hoạt động" #: src/cryptsetup.c:2247 #, c-format msgid "%s is not active LUKS device name or header is missing." msgstr "" #: src/cryptsetup.c:2285 src/cryptsetup.c:2306 #, fuzzy #| msgid "Option --header-backup-file is required.\n" msgid "Option --header-backup-file is required." msgstr "Cần tùy chọn“--header-backup-file”.\n" #: src/cryptsetup.c:2336 #, c-format msgid "%s is not cryptsetup managed device." msgstr "" #: src/cryptsetup.c:2347 #, fuzzy, c-format #| msgid "Resume is not supported for device %s.\n" msgid "Refresh is not supported for device type %s" msgstr "Thao tác phục hồi không được hỗ trợ cho kiểu thiết bị %s.\n" #: src/cryptsetup.c:2389 #, fuzzy, c-format #| msgid "Unrecognized metadata device type %s.\n" msgid "Unrecognized metadata device type %s." msgstr "Không nhận ra siêu dữ liệu của kiểu thiết bị %s.\n" #: src/cryptsetup.c:2392 #, fuzzy #| msgid "Command requires device and mapped name as arguments.\n" msgid "Command requires device and mapped name as arguments." msgstr "Lệnh cần thiết bị và tên ánh xạ như là các tham số.\n" #: src/cryptsetup.c:2414 #, c-format msgid "" "This operation will erase all keyslots on device %s.\n" "Device will become unusable after this operation." msgstr "" "Thao tác này sẽ tẩy mọi khe khóa trên thiết bị %s.\n" "Thiết bị sẽ không dùng được sau thao tác này." #: src/cryptsetup.c:2421 msgid "Operation aborted, keyslots were NOT wiped.\n" msgstr "" #: src/cryptsetup.c:2460 msgid "Invalid LUKS type, only luks1 and luks2 are supported." msgstr "" #: src/cryptsetup.c:2478 #, fuzzy, c-format #| msgid "Device %s already exists.\n" msgid "Device is already %s type." msgstr "Thiết bị %s đã sẵn có.\n" #: src/cryptsetup.c:2483 #, fuzzy, c-format #| msgid "This operation is not supported for %s crypt device.\n" msgid "This operation will convert %s to %s format.\n" msgstr "Thao tác này không được hỗ trợ cho thiết bị mã hóa %s.\n" #: src/cryptsetup.c:2489 msgid "Operation aborted, device was NOT converted.\n" msgstr "" #: src/cryptsetup.c:2529 msgid "Option --priority, --label or --subsystem is missing." msgstr "" #: src/cryptsetup.c:2563 src/cryptsetup.c:2596 src/cryptsetup.c:2619 #, fuzzy, c-format #| msgid "Key slot %d is invalid.\n" msgid "Token %d is invalid." msgstr "Khe khóa %d không đúng.\n" #: src/cryptsetup.c:2566 src/cryptsetup.c:2622 #, c-format msgid "Token %d in use." msgstr "" #: src/cryptsetup.c:2573 #, fuzzy, c-format #| msgid "Failed to read from key storage.\n" msgid "Failed to add luks2-keyring token %d." msgstr "Lỗi đọc từ kho lưu khóa.\n" #: src/cryptsetup.c:2582 src/cryptsetup.c:2644 #, fuzzy, c-format #| msgid "Failed to write to key storage.\n" msgid "Failed to assign token %d to keyslot %d." msgstr "Lỗi ghi khóa vào kho lưu khóa.\n" #: src/cryptsetup.c:2599 #, fuzzy, c-format #| msgid "Key slot %d is not used.\n" msgid "Token %d is not in use." msgstr "Khe khóa %d không được dùng.\n" #: src/cryptsetup.c:2634 #, fuzzy #| msgid "Failed to open key file.\n" msgid "Failed to import token from file." msgstr "Gặp lỗi khi mở tập tin khóa.\n" #: src/cryptsetup.c:2659 #, fuzzy, c-format #| msgid "Failed to write to key storage.\n" msgid "Failed to get token %d for export." msgstr "Lỗi ghi khóa vào kho lưu khóa.\n" #: src/cryptsetup.c:2674 msgid "--key-description parameter is mandatory for token add action." msgstr "" #: src/cryptsetup.c:2680 src/cryptsetup.c:2688 msgid "Action requires specific token. Use --token-id parameter." msgstr "" #: src/cryptsetup.c:2693 #, fuzzy, c-format #| msgid "Invalid key size %d.\n" msgid "Invalid token operation %s." msgstr "Kích cỡ khóa không đúng %d.\n" #: src/cryptsetup.c:2748 #, c-format msgid "Auto-detected active dm device '%s' for data device %s.\n" msgstr "" #: src/cryptsetup.c:2752 #, fuzzy, c-format #| msgid "Device %s is not a valid LUKS device.\n" msgid "Device %s is not a block device.\n" msgstr "Thiết bị %s không phải là một thiết bị kiểu LUKS đúng.\n" #: src/cryptsetup.c:2754 #, fuzzy, c-format #| msgid "Failed to obtain device mapper directory." msgid "Failed to auto-detect device %s holders." msgstr "Lỗi lấy thư mục trình ánh xạ thiết bị." #: src/cryptsetup.c:2756 #, c-format msgid "" "Unable to decide if device %s is activated or not.\n" "Are you sure you want to proceed with reencryption in offline mode?\n" "It may lead to data corruption if the device is actually activated.\n" "To run reencryption in online mode, use --active-name parameter instead.\n" msgstr "" #: src/cryptsetup.c:2836 #, fuzzy #| msgid "Invalid device %s.\n" msgid "Invalid LUKS device type." msgstr "Thiết bị không đúng %s.\n" #: src/cryptsetup.c:2841 msgid "Encryption without detached header (--header) is not possible without data device size reduction (--reduce-device-size)." msgstr "" #: src/cryptsetup.c:2846 msgid "Requested data offset must be less than or equal to half of --reduce-device-size parameter." msgstr "" #: src/cryptsetup.c:2855 #, c-format msgid "Adjusting --reduce-device-size value to twice the --offset % (sectors).\n" msgstr "" #: src/cryptsetup.c:2859 #, fuzzy #| msgid "This operation is supported only for LUKS device.\n" msgid "Encryption is supported only for LUKS2 format." msgstr "Thao tác này được hỗ trợ chỉ cho thiết bị LUKS.\n" #: src/cryptsetup.c:2882 #, c-format msgid "Detected LUKS device on %s. Do you want to encrypt that LUKS device again?" msgstr "" #: src/cryptsetup.c:2900 #, fuzzy, c-format #| msgid "Requested header backup file %s already exists.\n" msgid "Temporary header file %s already exists. Aborting." msgstr "Phần đầu tập tin sao lưu dự phòng đã yêu cầu %s đã sẵn có.\n" #: src/cryptsetup.c:2902 src/cryptsetup.c:2909 #, fuzzy, c-format #| msgid "Cannot create header backup file %s.\n" msgid "Cannot create temporary header file %s." msgstr "Không thể tạo phần đầu của tập tin sao lưu dự phòng %s.\n" #: src/cryptsetup.c:2976 #, c-format msgid "%s/%s is now active and ready for online encryption.\n" msgstr "" #: src/cryptsetup.c:3013 msgid "LUKS2 decryption is supported with detached header device only." msgstr "" #: src/cryptsetup.c:3146 src/cryptsetup.c:3152 #, fuzzy #| msgid "Do not change key, no data area reencryption." msgid "Not enough free keyslots for reencryption." msgstr "Khôngười thay đổi khóa, không có mã hóa lại vùng dữ liệu." #: src/cryptsetup.c:3172 src/cryptsetup_reencrypt.c:1312 #, fuzzy #| msgid "Key file can be used only with --key-slot or with exactly one key slot active.\n" msgid "Key file can be used only with --key-slot or with exactly one key slot active." msgstr "Tập tin khóa có thể sử dụng với tùy chọn --key-slot hoặc với chính xác một khe khóa hoạt động.\n" #: src/cryptsetup.c:3181 src/cryptsetup_reencrypt.c:1359 #: src/cryptsetup_reencrypt.c:1370 #, fuzzy, c-format #| msgid "Enter passphrase for key slot %u: " msgid "Enter passphrase for key slot %d: " msgstr "Gõ cụm từ mật khẩu cho khe khóa %u: " #: src/cryptsetup.c:3190 #, c-format msgid "Enter passphrase for key slot %u: " msgstr "Gõ cụm từ mật khẩu cho khe khóa %u: " #: src/cryptsetup.c:3236 #, c-format msgid "Switching data encryption cipher to %s.\n" msgstr "" #: src/cryptsetup.c:3369 #, fuzzy #| msgid "Command requires device and mapped name as arguments.\n" msgid "Command requires device as argument." msgstr "Lệnh cần thiết bị và tên ánh xạ như là các tham số.\n" #: src/cryptsetup.c:3391 msgid "Only LUKS2 format is currently supported. Please use cryptsetup-reencrypt tool for LUKS1." msgstr "" #: src/cryptsetup.c:3403 msgid "Legacy offline reencryption already in-progress. Use cryptsetup-reencrypt utility." msgstr "" #: src/cryptsetup.c:3413 src/cryptsetup_reencrypt.c:196 msgid "Reencryption of device with integrity profile is not supported." msgstr "" #: src/cryptsetup.c:3421 msgid "LUKS2 reencryption already initialized. Aborting operation." msgstr "" #: src/cryptsetup.c:3425 #, fuzzy #| msgid "Log file %s exists, resuming reencryption.\n" msgid "LUKS2 device is not in reencryption." msgstr "Tập tin nhật ký %s đã có sẵn rồi, giả định là reencryption (mã hóa lại).\n" #: src/cryptsetup.c:3452 msgid " [--type ] []" msgstr " [--type ] []" #: src/cryptsetup.c:3452 src/veritysetup.c:408 src/integritysetup.c:493 #, fuzzy #| msgid "open device as mapping " msgid "open device as " msgstr "mở thiết bị như là ánh xạ " #: src/cryptsetup.c:3453 src/cryptsetup.c:3454 src/cryptsetup.c:3455 #: src/veritysetup.c:409 src/veritysetup.c:410 src/integritysetup.c:494 #: src/integritysetup.c:495 msgid "" msgstr "" #: src/cryptsetup.c:3453 src/veritysetup.c:409 src/integritysetup.c:494 msgid "close device (remove mapping)" msgstr "đóng thiết bị (gỡ bỏ ánh xạ)" #: src/cryptsetup.c:3454 msgid "resize active device" msgstr "thay đổi kích cỡ của thiết bị hoạt động" #: src/cryptsetup.c:3455 msgid "show device status" msgstr "hiển thị trạng thái về thiết bị" #: src/cryptsetup.c:3456 msgid "[--cipher ]" msgstr "[--cipher ]" #: src/cryptsetup.c:3456 msgid "benchmark cipher" msgstr "đo kiểm tốc độ mã hóa" #: src/cryptsetup.c:3457 src/cryptsetup.c:3458 src/cryptsetup.c:3459 #: src/cryptsetup.c:3460 src/cryptsetup.c:3461 src/cryptsetup.c:3468 #: src/cryptsetup.c:3469 src/cryptsetup.c:3470 src/cryptsetup.c:3471 #: src/cryptsetup.c:3472 src/cryptsetup.c:3473 src/cryptsetup.c:3474 #: src/cryptsetup.c:3475 src/cryptsetup.c:3476 msgid "" msgstr "" #: src/cryptsetup.c:3457 msgid "try to repair on-disk metadata" msgstr "thử sửa chữa siêu dữ liệu (metadata) on-disk" #: src/cryptsetup.c:3458 #, fuzzy #| msgid "add key to LUKS device" msgid "reencrypt LUKS2 device" msgstr "thêm khóa vào thiết bị LUKS" #: src/cryptsetup.c:3459 msgid "erase all keyslots (remove encryption key)" msgstr "tẩy mọi khe khóa (gỡ bỏ khóa mã hóa)" #: src/cryptsetup.c:3460 msgid "convert LUKS from/to LUKS2 format" msgstr "" #: src/cryptsetup.c:3461 msgid "set permanent configuration options for LUKS2" msgstr "" #: src/cryptsetup.c:3462 src/cryptsetup.c:3463 msgid " []" msgstr " []" #: src/cryptsetup.c:3462 msgid "formats a LUKS device" msgstr "định dạng một thiết bị kiểu LUKS" #: src/cryptsetup.c:3463 msgid "add key to LUKS device" msgstr "thêm khóa vào thiết bị LUKS" #: src/cryptsetup.c:3464 src/cryptsetup.c:3465 src/cryptsetup.c:3466 msgid " []" msgstr " []" #: src/cryptsetup.c:3464 msgid "removes supplied key or key file from LUKS device" msgstr "gỡ bỏ khỏi thiết bị LUKS khóa hoặc tập tin khóa đưa ra" #: src/cryptsetup.c:3465 msgid "changes supplied key or key file of LUKS device" msgstr "thay đổi khóa hay tập tin khóa đã áp dụng của thiết bị LUKS" #: src/cryptsetup.c:3466 msgid "converts a key to new pbkdf parameters" msgstr "" #: src/cryptsetup.c:3467 msgid " " msgstr " " #: src/cryptsetup.c:3467 msgid "wipes key with number from LUKS device" msgstr "xóa khỏi thiết bị LUKS khóa có số " #: src/cryptsetup.c:3468 msgid "print UUID of LUKS device" msgstr "in ra mã số UUID của thiết bị LUKS" #: src/cryptsetup.c:3469 msgid "tests for LUKS partition header" msgstr "thử có phần đầu phân vùng LUKS không" #: src/cryptsetup.c:3470 msgid "dump LUKS partition information" msgstr "đổ thông tin về phân vùng LUKS" #: src/cryptsetup.c:3471 msgid "dump TCRYPT device information" msgstr "dump thông tin thiết bị TCRYPT" #: src/cryptsetup.c:3472 #, fuzzy #| msgid "dump TCRYPT device information" msgid "dump BITLK device information" msgstr "dump thông tin thiết bị TCRYPT" #: src/cryptsetup.c:3473 #, fuzzy #| msgid "Suspend LUKS device and wipe key (all IOs are frozen)." msgid "Suspend LUKS device and wipe key (all IOs are frozen)" msgstr "Ngưng thiết bị LUKS và tẩy khóa (thì mọi việc V/R đều đông cứng)." #: src/cryptsetup.c:3474 #, fuzzy #| msgid "Resume suspended LUKS device." msgid "Resume suspended LUKS device" msgstr "Tiếp tục lại sử dụng thiết bị LUKS bị ngưng." #: src/cryptsetup.c:3475 msgid "Backup LUKS device header and keyslots" msgstr "Sao lưu phần đầu và các khe khóa của thiết bị LUKS" #: src/cryptsetup.c:3476 msgid "Restore LUKS device header and keyslots" msgstr "Phục hồi phần đầu và các khe khóa của thiết bị LUKS" #: src/cryptsetup.c:3477 msgid " " msgstr "" #: src/cryptsetup.c:3477 msgid "Manipulate LUKS2 tokens" msgstr "" #: src/cryptsetup.c:3495 src/veritysetup.c:426 src/integritysetup.c:511 msgid "" "\n" " is one of:\n" msgstr "" "\n" " là một trong:\n" #: src/cryptsetup.c:3501 #, fuzzy #| msgid "" #| "\n" #| "You can also use old syntax aliases:\n" #| "\topen: create (plainOpen), luksOpen, loopaesOpen, tcryptOpen\n" #| "\tclose: remove (plainClose), luksClose, loopaesClose, tcryptClose\n" msgid "" "\n" "You can also use old syntax aliases:\n" "\topen: create (plainOpen), luksOpen, loopaesOpen, tcryptOpen, bitlkOpen\n" "\tclose: remove (plainClose), luksClose, loopaesClose, tcryptClose, bitlkClose\n" msgstr "" "\n" "Bạn còn có thể sử dụng cú pháp bí danh kiểu cũ:\n" "\topen: create (plainOpen), luksOpen, loopaesOpen, tcryptOpen\n" "\tclose: remove (plainClose), luksClose, loopaesClose, tcryptClose\n" #: src/cryptsetup.c:3505 #, c-format msgid "" "\n" " is the device to create under %s\n" " is the encrypted device\n" " is the LUKS key slot number to modify\n" " optional key file for the new key for luksAddKey action\n" msgstr "" "\n" " là thiết bị cần tạo dưới %s\n" " là thiết bị đã mã hóa\n" " là số thứ tự khe khóa LUKS cần sửa đổi\n" " là tập tin khóa tùy chọn cho khóa mới trong thao tác luksAddKey\n" #: src/cryptsetup.c:3512 #, c-format msgid "" "\n" "Default compiled-in metadata format is %s (for luksFormat action).\n" msgstr "" #: src/cryptsetup.c:3517 #, fuzzy, c-format #| msgid "" #| "\n" #| "Default compiled-in key and passphrase parameters:\n" #| "\tMaximum keyfile size: %dkB, Maximum interactive passphrase length %d (characters)\n" #| "Default PBKDF2 iteration time for LUKS: %d (ms)\n" msgid "" "\n" "Default compiled-in key and passphrase parameters:\n" "\tMaximum keyfile size: %dkB, Maximum interactive passphrase length %d (characters)\n" "Default PBKDF for LUKS1: %s, iteration time: %d (ms)\n" "Default PBKDF for LUKS2: %s\n" "\tIteration time: %d, Memory required: %dkB, Parallel threads: %d\n" msgstr "" "\n" "Các tham số mặc định liên quan đến khóa và mật khẩu được biên dịch sẵn:\n" "\tĐộ dài tập tin khóa tối đa: %dkB, Độ dài mật khẩu tương tác tối đa %d (ký tự)\n" "Thời gian tương tác PBKDF2 mặc định cho LUKS: %d (ms)\n" #: src/cryptsetup.c:3528 #, fuzzy, c-format #| msgid "" #| "\n" #| "Default compiled-in device cipher parameters:\n" #| "\tloop-AES: %s, Key %d bits\n" #| "\tplain: %s, Key: %d bits, Password hashing: %s\n" #| "\tLUKS1: %s, Key: %d bits, LUKS header hashing: %s, RNG: %s\n" msgid "" "\n" "Default compiled-in device cipher parameters:\n" "\tloop-AES: %s, Key %d bits\n" "\tplain: %s, Key: %d bits, Password hashing: %s\n" "\tLUKS: %s, Key: %d bits, LUKS header hashing: %s, RNG: %s\n" msgstr "" "\n" "Các tham số mặc định liên quan đến việc mã hóa được đặt sẵn:\n" "\tloop-AES: %s, Khóa %d bit\n" "\tdữ liệu thô: %s, Khóa: %d bit, Kiểu băm mật khẩu: %s\n" "\tLUKS1: %s, Khóa: %d bit, Kiểu băm cho phần đầu LUKS: %s, RNG: %s\n" #: src/cryptsetup.c:3537 msgid "\tLUKS: Default keysize with XTS mode (two internal keys) will be doubled.\n" msgstr "" #: src/cryptsetup.c:3555 src/veritysetup.c:587 src/integritysetup.c:665 #, c-format msgid "%s: requires %s as arguments" msgstr "%s: cần thiết %s làm đối số" #: src/cryptsetup.c:3587 src/veritysetup.c:472 src/integritysetup.c:553 #: src/cryptsetup_reencrypt.c:1627 msgid "Show this help message" msgstr "Hiển thị trợ giúp này" #: src/cryptsetup.c:3588 src/veritysetup.c:473 src/integritysetup.c:554 #: src/cryptsetup_reencrypt.c:1628 msgid "Display brief usage" msgstr "Hiển thị thông tin ngắn về cách sử dụng" #: src/cryptsetup.c:3589 src/veritysetup.c:474 src/integritysetup.c:555 #: src/cryptsetup_reencrypt.c:1629 msgid "Print package version" msgstr "Hiển thị phiên bản của gói" #: src/cryptsetup.c:3593 src/veritysetup.c:478 src/integritysetup.c:559 #: src/cryptsetup_reencrypt.c:1633 msgid "Help options:" msgstr "Tùy chọn trợ giúp:" #: src/cryptsetup.c:3594 src/veritysetup.c:479 src/integritysetup.c:560 #: src/cryptsetup_reencrypt.c:1634 msgid "Shows more detailed error messages" msgstr "Hiển thị các thông điệp lỗi chi tiết hơn" #: src/cryptsetup.c:3595 src/veritysetup.c:480 src/integritysetup.c:561 #: src/cryptsetup_reencrypt.c:1635 msgid "Show debug messages" msgstr "Hiển thị thông điệp gỡ lỗi" #: src/cryptsetup.c:3596 #, fuzzy #| msgid "Show debug messages" msgid "Show debug messages including JSON metadata" msgstr "Hiển thị thông điệp gỡ lỗi" #: src/cryptsetup.c:3597 src/cryptsetup_reencrypt.c:1637 msgid "The cipher used to encrypt the disk (see /proc/crypto)" msgstr "Mật mã dùng để bảo vệ đĩa (xem “/proc/crypto”)" #: src/cryptsetup.c:3598 src/cryptsetup_reencrypt.c:1639 msgid "The hash used to create the encryption key from the passphrase" msgstr "Chuỗi duy nhất dùng để tạo khóa mã hóa từ cụm từ mật khẩu" #: src/cryptsetup.c:3599 msgid "Verifies the passphrase by asking for it twice" msgstr "Thẩm tra cụm từ mật khẩu bằng cách yêu cầu nó hai lần" #: src/cryptsetup.c:3600 src/cryptsetup_reencrypt.c:1641 #, fuzzy #| msgid "Read the key from a file." msgid "Read the key from a file" msgstr "Đọc khóa từ một tập tin." #: src/cryptsetup.c:3601 msgid "Read the volume (master) key from file." msgstr "Đọc khóa khối tin (chủ) từ tập tin." #: src/cryptsetup.c:3602 #, fuzzy #| msgid "Dump volume (master) key instead of keyslots info." msgid "Dump volume (master) key instead of keyslots info" msgstr "Dump (đổ thành đống) khóa vùng chứa (master) thay vì thông tin khe-khóa." #: src/cryptsetup.c:3603 src/cryptsetup_reencrypt.c:1638 msgid "The size of the encryption key" msgstr "Kích cỡ của khóa mã hóa" #: src/cryptsetup.c:3603 src/cryptsetup.c:3666 src/integritysetup.c:579 #: src/integritysetup.c:583 src/integritysetup.c:587 #: src/cryptsetup_reencrypt.c:1638 msgid "BITS" msgstr "BIT" #: src/cryptsetup.c:3604 src/cryptsetup_reencrypt.c:1654 msgid "Limits the read from keyfile" msgstr "Giới hạn việc đọc từ tập-tin-khóa" #: src/cryptsetup.c:3604 src/cryptsetup.c:3605 src/cryptsetup.c:3606 #: src/cryptsetup.c:3607 src/cryptsetup.c:3610 src/cryptsetup.c:3663 #: src/cryptsetup.c:3664 src/cryptsetup.c:3672 src/cryptsetup.c:3673 #: src/veritysetup.c:483 src/veritysetup.c:484 src/veritysetup.c:485 #: src/veritysetup.c:488 src/veritysetup.c:489 src/integritysetup.c:568 #: src/integritysetup.c:574 src/integritysetup.c:575 #: src/cryptsetup_reencrypt.c:1653 src/cryptsetup_reencrypt.c:1654 #: src/cryptsetup_reencrypt.c:1655 src/cryptsetup_reencrypt.c:1656 msgid "bytes" msgstr "byte" #: src/cryptsetup.c:3605 src/cryptsetup_reencrypt.c:1653 msgid "Number of bytes to skip in keyfile" msgstr "Số lượng byte nhảy qua trong tập tin khóa" #: src/cryptsetup.c:3606 msgid "Limits the read from newly added keyfile" msgstr "Giới hạn đọc từ tập tin khóa mới thêm vào" #: src/cryptsetup.c:3607 msgid "Number of bytes to skip in newly added keyfile" msgstr "Số lượng byte để nhảy qua trong tập tin khóa mới thêm" #: src/cryptsetup.c:3608 msgid "Slot number for new key (default is first free)" msgstr "Số thứ tự khe cho khóa mới (mặc định là khe trống thứ nhất)" #: src/cryptsetup.c:3609 msgid "The size of the device" msgstr "Kích cỡ của thiết bị" #: src/cryptsetup.c:3609 src/cryptsetup.c:3611 src/cryptsetup.c:3612 #: src/cryptsetup.c:3618 src/integritysetup.c:569 src/integritysetup.c:576 msgid "SECTORS" msgstr "CUNG-TỪ" #: src/cryptsetup.c:3610 src/cryptsetup_reencrypt.c:1656 msgid "Use only specified device size (ignore rest of device). DANGEROUS!" msgstr "Chỉ sử dụng kích thước dữ liệu thiết bị (bỏ qua phần còn lại của thiết bị). NGUY HIỂM!" #: src/cryptsetup.c:3611 msgid "The start offset in the backend device" msgstr "Khoảng bù đầu tiên trong thiết bị thật chạy ở phía sau" #: src/cryptsetup.c:3612 msgid "How many sectors of the encrypted data to skip at the beginning" msgstr "Bao nhiêu cung từ dữ liệu mã hóa cần bỏ qua ở đầu" #: src/cryptsetup.c:3613 msgid "Create a readonly mapping" msgstr "Tạo một sự ánh xạ chỉ cho đọc" #: src/cryptsetup.c:3614 src/integritysetup.c:562 #: src/cryptsetup_reencrypt.c:1644 msgid "Do not ask for confirmation" msgstr "Không cần xác nhận" #: src/cryptsetup.c:3615 msgid "Timeout for interactive passphrase prompt (in seconds)" msgstr "Thời gian chờ gõ cụm từ mật khẩu tối đa (theo giây)" #: src/cryptsetup.c:3615 src/cryptsetup.c:3616 src/integritysetup.c:563 #: src/cryptsetup_reencrypt.c:1645 msgid "secs" msgstr "giây" #: src/cryptsetup.c:3616 src/integritysetup.c:563 #: src/cryptsetup_reencrypt.c:1645 msgid "Progress line update (in seconds)" msgstr "" #: src/cryptsetup.c:3617 src/cryptsetup_reencrypt.c:1646 msgid "How often the input of the passphrase can be retried" msgstr "Số các lần có cho phép thử gõ lại cụm từ mật khẩu" #: src/cryptsetup.c:3618 msgid "Align payload at sector boundaries - for luksFormat" msgstr "Căn chỉnh trọng tải ở biên giới cung từ — cho định dạng “luksFormat”" #: src/cryptsetup.c:3619 #, fuzzy #| msgid "File with LUKS header and keyslots backup." msgid "File with LUKS header and keyslots backup" msgstr "Tập tin chứa bản sao lưu phần đầu và các khe khóa của thiết bị LUKS." #: src/cryptsetup.c:3620 src/cryptsetup_reencrypt.c:1647 #, fuzzy #| msgid "Use /dev/random for generating volume key." msgid "Use /dev/random for generating volume key" msgstr "Dùng /dev/random để tạo khóa volume." #: src/cryptsetup.c:3621 src/cryptsetup_reencrypt.c:1648 #, fuzzy #| msgid "Use /dev/urandom for generating volume key." msgid "Use /dev/urandom for generating volume key" msgstr "Dùng /dev/urandom để tạo khóa vùng." #: src/cryptsetup.c:3622 #, fuzzy #| msgid "Share device with another non-overlapping crypt segment." msgid "Share device with another non-overlapping crypt segment" msgstr "Thiết bị chia sẻ với đoạn crypt không-chồng-lên-nhau khác." #: src/cryptsetup.c:3623 src/veritysetup.c:492 #, fuzzy #| msgid "UUID for device to use." msgid "UUID for device to use" msgstr "UUID dành cho tập tin sử dụng." #: src/cryptsetup.c:3624 src/integritysetup.c:599 #, fuzzy #| msgid "Allow discards (aka TRIM) requests for device." msgid "Allow discards (aka TRIM) requests for device" msgstr "Cho phép hủy bỏ (được biết đến như là TRIM) các yêu cầu cho thiết bị." #: src/cryptsetup.c:3625 src/cryptsetup_reencrypt.c:1665 #, fuzzy #| msgid "Device or file with separated LUKS header." msgid "Device or file with separated LUKS header" msgstr "Thiết bị hay tập tin với phần đầu LUKS tách nhau." #: src/cryptsetup.c:3626 #, fuzzy #| msgid "Do not activate device, just check passphrase." msgid "Do not activate device, just check passphrase" msgstr "Không kích hoạt thiết bị, chỉ cần kiểm tra mật khẩu." #: src/cryptsetup.c:3627 #, fuzzy #| msgid "Use hidden header (hidden TCRYPT device)." msgid "Use hidden header (hidden TCRYPT device)" msgstr "Dùng phần đầu ẩn (thiết bị TCRYPT ẩn)." #: src/cryptsetup.c:3628 #, fuzzy #| msgid "Device is system TCRYPT drive (with bootloader)." msgid "Device is system TCRYPT drive (with bootloader)" msgstr "Thiết bị là ổ đĩa TCRYPT hệ thống (có bootloader)." #: src/cryptsetup.c:3629 #, fuzzy #| msgid "Use backup (secondary) TCRYPT header." msgid "Use backup (secondary) TCRYPT header" msgstr "Dùng phần đầu (thứ cấp) TCRYPT." #: src/cryptsetup.c:3630 #, fuzzy #| msgid "Scan also for VeraCrypt compatible device." msgid "Scan also for VeraCrypt compatible device" msgstr "Cũng quét cho thiết bị tương thích VeraCrypt." #: src/cryptsetup.c:3631 #, fuzzy #| msgid "Scan also for VeraCrypt compatible device." msgid "Personal Iteration Multiplier for VeraCrypt compatible device" msgstr "Cũng quét cho thiết bị tương thích VeraCrypt." #: src/cryptsetup.c:3632 #, fuzzy #| msgid "Scan also for VeraCrypt compatible device." msgid "Query Personal Iteration Multiplier for VeraCrypt compatible device" msgstr "Cũng quét cho thiết bị tương thích VeraCrypt." #: src/cryptsetup.c:3633 #, fuzzy #| msgid "Type of device metadata: luks, plain, loopaes, tcrypt." msgid "Type of device metadata: luks, luks1, luks2, plain, loopaes, tcrypt, bitlk" msgstr "Kiểu của siêu dữ liệu thiết bị: luks, plain, loopaes, tcrypt." #: src/cryptsetup.c:3634 #, fuzzy #| msgid "Disable password quality check (if enabled)." msgid "Disable password quality check (if enabled)" msgstr "Tắt chức năng kiểm tra chất lượng mật khẩu (nếu nó đang bật)." #: src/cryptsetup.c:3635 #, fuzzy #| msgid "Use dm-crypt same_cpu_crypt performance compatibility option." msgid "Use dm-crypt same_cpu_crypt performance compatibility option" msgstr "Dùng tùy chọn tương thích hiệu năng same_cpu_crypt dm-crypt." #: src/cryptsetup.c:3636 #, fuzzy #| msgid "Use dm-crypt submit_from_crypt_cpus performance compatibility option." msgid "Use dm-crypt submit_from_crypt_cpus performance compatibility option" msgstr "Dùng tùy chọn tương thích hiệu năng submit_from_crypt_cpus dm-crypt." #: src/cryptsetup.c:3637 msgid "Bypass dm-crypt workqueue and process read requests synchronously" msgstr "" #: src/cryptsetup.c:3638 msgid "Bypass dm-crypt workqueue and process write requests synchronously" msgstr "" #: src/cryptsetup.c:3639 msgid "Device removal is deferred until the last user closes it" msgstr "" #: src/cryptsetup.c:3640 msgid "Use global lock to serialize memory hard PBKDF (OOM workaround)" msgstr "" #: src/cryptsetup.c:3641 #, fuzzy #| msgid "PBKDF2 iteration time for LUKS (in ms)" msgid "PBKDF iteration time for LUKS (in ms)" msgstr "Thời gian lặp lại PBKDF2 cho LUKS (theo mili-giây)" #: src/cryptsetup.c:3641 src/cryptsetup_reencrypt.c:1643 msgid "msecs" msgstr "mili-giây" #: src/cryptsetup.c:3642 src/cryptsetup_reencrypt.c:1661 msgid "PBKDF algorithm (for LUKS2): argon2i, argon2id, pbkdf2" msgstr "" #: src/cryptsetup.c:3643 src/cryptsetup_reencrypt.c:1662 msgid "PBKDF memory cost limit" msgstr "" #: src/cryptsetup.c:3643 src/cryptsetup_reencrypt.c:1662 #, fuzzy #| msgid "bytes" msgid "kilobytes" msgstr "byte" #: src/cryptsetup.c:3644 src/cryptsetup_reencrypt.c:1663 msgid "PBKDF parallel cost" msgstr "" #: src/cryptsetup.c:3644 src/cryptsetup_reencrypt.c:1663 msgid "threads" msgstr "" #: src/cryptsetup.c:3645 src/cryptsetup_reencrypt.c:1664 msgid "PBKDF iterations cost (forced, disables benchmark)" msgstr "" #: src/cryptsetup.c:3646 msgid "Keyslot priority: ignore, normal, prefer" msgstr "" #: src/cryptsetup.c:3647 #, fuzzy #| msgid "try to repair on-disk metadata" msgid "Disable locking of on-disk metadata" msgstr "thử sửa chữa siêu dữ liệu (metadata) on-disk" #: src/cryptsetup.c:3648 msgid "Disable loading volume keys via kernel keyring" msgstr "" #: src/cryptsetup.c:3649 msgid "Data integrity algorithm (LUKS2 only)" msgstr "" #: src/cryptsetup.c:3650 src/integritysetup.c:590 msgid "Disable journal for integrity device" msgstr "" #: src/cryptsetup.c:3651 src/integritysetup.c:564 msgid "Do not wipe device after format" msgstr "" #: src/cryptsetup.c:3652 src/integritysetup.c:594 msgid "Use inefficient legacy padding (old kernels)" msgstr "" #: src/cryptsetup.c:3653 msgid "Do not ask for passphrase if activation by token fails" msgstr "" #: src/cryptsetup.c:3654 msgid "Token number (default: any)" msgstr "" #: src/cryptsetup.c:3655 msgid "Key description" msgstr "" #: src/cryptsetup.c:3656 msgid "Encryption sector size (default: 512 bytes)" msgstr "" #: src/cryptsetup.c:3657 msgid "Use IV counted in sector size (not in 512 bytes)" msgstr "" #: src/cryptsetup.c:3658 msgid "Set activation flags persistent for device" msgstr "" #: src/cryptsetup.c:3659 #, fuzzy #| msgid "formats a LUKS device" msgid "Set label for the LUKS2 device" msgstr "định dạng một thiết bị kiểu LUKS" #: src/cryptsetup.c:3660 msgid "Set subsystem label for the LUKS2 device" msgstr "" #: src/cryptsetup.c:3661 msgid "Create or dump unbound (no assigned data segment) LUKS2 keyslot" msgstr "" #: src/cryptsetup.c:3662 #, fuzzy #| msgid "Read the key from a file." msgid "Read or write the json from or to a file" msgstr "Đọc khóa từ một tập tin." #: src/cryptsetup.c:3663 msgid "LUKS2 header metadata area size" msgstr "" #: src/cryptsetup.c:3664 #, fuzzy #| msgid "File with LUKS header and keyslots backup." msgid "LUKS2 header keyslots area size" msgstr "Tập tin chứa bản sao lưu phần đầu và các khe khóa của thiết bị LUKS." #: src/cryptsetup.c:3665 msgid "Refresh (reactivate) device with new parameters" msgstr "" #: src/cryptsetup.c:3666 #, fuzzy #| msgid "The size of the encryption key" msgid "LUKS2 keyslot: The size of the encryption key" msgstr "Kích cỡ của khóa mã hóa" #: src/cryptsetup.c:3667 msgid "LUKS2 keyslot: The cipher used for keyslot encryption" msgstr "" #: src/cryptsetup.c:3668 #, fuzzy #| msgid "Permanently decrypt device (remove encryption)." msgid "Encrypt LUKS2 device (in-place encryption)." msgstr "Thiết bị mã hóa cố định (gỡ bỏ mã hóa)." #: src/cryptsetup.c:3669 #, fuzzy #| msgid "Permanently decrypt device (remove encryption)." msgid "Decrypt LUKS2 device (remove encryption)." msgstr "Thiết bị mã hóa cố định (gỡ bỏ mã hóa)." #: src/cryptsetup.c:3670 msgid "Initialize LUKS2 reencryption in metadata only." msgstr "" #: src/cryptsetup.c:3671 msgid "Resume initialized LUKS2 reencryption only." msgstr "" #: src/cryptsetup.c:3672 src/cryptsetup_reencrypt.c:1655 msgid "Reduce data device size (move data offset). DANGEROUS!" msgstr "Giảm kích thước dữ liệu thiết bị (di chuyển offset dữ liệu). NGUY HIỂM!" #: src/cryptsetup.c:3673 #, fuzzy #| msgid "Reencryption block size" msgid "Maximal reencryption hotzone size." msgstr "Kích thước khối mã hóa lại" #: src/cryptsetup.c:3674 msgid "Reencryption hotzone resilience type (checksum,journal,none)" msgstr "" #: src/cryptsetup.c:3675 #, fuzzy #| msgid "Reencryption block size" msgid "Reencryption hotzone checksums hash" msgstr "Kích thước khối mã hóa lại" #: src/cryptsetup.c:3676 msgid "Override device autodetection of dm device to be reencrypted" msgstr "" #: src/cryptsetup.c:3692 src/veritysetup.c:515 src/integritysetup.c:615 msgid "[OPTION...] " msgstr "[TÙY CHỌN…] <đặc-tả-thao-tác>" #: src/cryptsetup.c:3747 src/veritysetup.c:551 src/integritysetup.c:626 msgid "Argument missing." msgstr "Còn thiếu đối số ." #: src/cryptsetup.c:3817 src/veritysetup.c:582 src/integritysetup.c:660 msgid "Unknown action." msgstr "Không hiểu thao-tác." #: src/cryptsetup.c:3827 msgid "Options --refresh and --test-passphrase are mutually exclusive." msgstr "" #: src/cryptsetup.c:3832 #, fuzzy #| msgid "Option --shared is allowed only for open of plain device.\n" msgid "Option --deferred is allowed only for close command." msgstr "Tùy chọn “--shared” chỉ cho phép với thao tác tạo mở của thiết bị thường.\n" #: src/cryptsetup.c:3837 #, fuzzy #| msgid "Option --shared is allowed only for open of plain device.\n" msgid "Option --shared is allowed only for open of plain device." msgstr "Tùy chọn “--shared” chỉ cho phép với thao tác tạo mở của thiết bị thường.\n" #: src/cryptsetup.c:3842 src/integritysetup.c:677 #, fuzzy #| msgid "Option --allow-discards is allowed only for open operation.\n" msgid "Option --allow-discards is allowed only for open operation." msgstr "Tùy chọn “--allow-discards” chỉ cho phép với thao tác mở.\n" #: src/cryptsetup.c:3847 #, fuzzy #| msgid "Option --allow-discards is allowed only for open operation.\n" msgid "Option --persistent is allowed only for open operation." msgstr "Tùy chọn “--allow-discards” chỉ cho phép với thao tác mở.\n" #: src/cryptsetup.c:3852 #, fuzzy #| msgid "Option --allow-discards is allowed only for open operation.\n" msgid "Option --serialize-memory-hard-pbkdf is allowed only for open operation." msgstr "Tùy chọn “--allow-discards” chỉ cho phép với thao tác mở.\n" #: src/cryptsetup.c:3857 msgid "Option --persistent is not allowed with --test-passphrase." msgstr "" #: src/cryptsetup.c:3867 #, fuzzy #| msgid "" #| "Option --key-size is allowed only for luksFormat, open and benchmark.\n" #| "To limit read from keyfile use --keyfile-size=(bytes)." msgid "" "Option --key-size is allowed only for luksFormat, luksAddKey,\n" "open and benchmark actions. To limit read from keyfile use --keyfile-size=(bytes)." msgstr "" "Tùy chọn --key-size thì chỉ cho phép với các thao tác luksFormat, mở và đo kiểm.\n" "Để giới hạn đọc từ tập-tin-khóa, hãy sử dụng tùy chọn --keyfile-size=(bytes)." #: src/cryptsetup.c:3873 #, fuzzy #| msgid "Option --align-payload is allowed only for luksFormat." msgid "Option --integrity is allowed only for luksFormat (LUKS2)." msgstr "Tùy chọn “--align-payload” chỉ được phép cho “luksFormat”." #: src/cryptsetup.c:3878 msgid "Option --integrity-no-wipe can be used only for format action with integrity extension." msgstr "" #: src/cryptsetup.c:3884 #, fuzzy #| msgid "Option --uuid is allowed only for luksFormat and luksUUID." msgid "Options --label and --subsystem are allowed only for luksFormat and config LUKS2 operations." msgstr "Tùy chọn “--uuid” thì chỉ cho phép với “luksFormat” và “luksUUID”." #: src/cryptsetup.c:3890 #, fuzzy #| msgid "Option --test-passphrase is allowed only for open of LUKS and TCRYPT devices.\n" msgid "Option --test-passphrase is allowed only for open of LUKS, TCRYPT and BITLK devices." msgstr "Tùy chọn “--test-passphrase” chỉ được phép cho lệnh mở thiết bị LUKS và TCRYPT.\n" #: src/cryptsetup.c:3895 src/cryptsetup_reencrypt.c:1728 msgid "Key size must be a multiple of 8 bits" msgstr "Kích cỡ khóa phải là bội số của 8 bít" #: src/cryptsetup.c:3901 src/cryptsetup_reencrypt.c:1412 #: src/cryptsetup_reencrypt.c:1733 msgid "Key slot is invalid." msgstr "Khe khóa không đúng." #: src/cryptsetup.c:3908 #, fuzzy #| msgid "Option --key-file takes precedence over specified key file argument.\n" msgid "Option --key-file takes precedence over specified key file argument." msgstr "Tùy chọn --key-file giữ quyền ưu tiên cao hơn tham số tập tin khóa đã chỉ định.\n" #: src/cryptsetup.c:3915 src/veritysetup.c:594 src/integritysetup.c:686 #: src/cryptsetup_reencrypt.c:1707 msgid "Negative number for option not permitted." msgstr "Tùy chọn không chấp nhận giá trị là số âm." #: src/cryptsetup.c:3919 msgid "Only one --key-file argument is allowed." msgstr "Chỉ cho phép một tùy chọn --key-file." #: src/cryptsetup.c:3923 src/cryptsetup_reencrypt.c:1699 #: src/cryptsetup_reencrypt.c:1737 msgid "Only one of --use-[u]random options is allowed." msgstr "Chỉ cho phép một tùy chọn “--use-[u]random”." #: src/cryptsetup.c:3927 msgid "Option --use-[u]random is allowed only for luksFormat." msgstr "Tùy chọn “--use-[u]random” chỉ được phép cho “luksFormat”." #: src/cryptsetup.c:3931 msgid "Option --uuid is allowed only for luksFormat and luksUUID." msgstr "Tùy chọn “--uuid” thì chỉ cho phép với “luksFormat” và “luksUUID”." #: src/cryptsetup.c:3935 msgid "Option --align-payload is allowed only for luksFormat." msgstr "Tùy chọn “--align-payload” chỉ được phép cho “luksFormat”." #: src/cryptsetup.c:3939 msgid "Options --luks2-metadata-size and --opt-luks2-keyslots-size are allowed only for luksFormat with LUKS2." msgstr "" #: src/cryptsetup.c:3944 #, fuzzy #| msgid "Invalid device size specification." msgid "Invalid LUKS2 metadata size specification." msgstr "Đặc tả kích thước thiết bị không đúng." #: src/cryptsetup.c:3948 #, fuzzy #| msgid "Invalid device size specification." msgid "Invalid LUKS2 keyslots size specification." msgstr "Đặc tả kích thước thiết bị không đúng." #: src/cryptsetup.c:3952 #, fuzzy #| msgid "Option --align-payload is allowed only for luksFormat." msgid "Options --align-payload and --offset cannot be combined." msgstr "Tùy chọn “--align-payload” chỉ được phép cho “luksFormat”." #: src/cryptsetup.c:3958 #, fuzzy #| msgid "Option --skip is supported only for open of plain and loopaes devices.\n" msgid "Option --skip is supported only for open of plain and loopaes devices." msgstr "Tùy chọn “--skip” chỉ hỗ trợ cho lệnh mở (open) của thiết bị thường và “loopaes”.\n" #: src/cryptsetup.c:3965 #, fuzzy #| msgid "Option --offset is supported only for open of plain and loopaes devices.\n" msgid "Option --offset is supported only for open of plain and loopaes devices, luksFormat and device reencryption." msgstr "Tùy chọn “--offset” chỉ hỗ trợ cho lệnh mở (open) của thiết bị thường và “loopaes”.\n" #: src/cryptsetup.c:3971 #, fuzzy #| msgid "Option --tcrypt-hidden, --tcrypt-system or --tcrypt-backup is supported only for TCRYPT device.\n" msgid "Option --tcrypt-hidden, --tcrypt-system or --tcrypt-backup is supported only for TCRYPT device." msgstr "Tùy chọn --tcrypt-hidden, --tcrypt-system hay --tcrypt-backup chỉ được hỗ trợ trên thiết bị TCRYPT.\n" #: src/cryptsetup.c:3976 #, fuzzy #| msgid "Option --tcrypt-hidden cannot be combined with --allow-discards.\n" msgid "Option --tcrypt-hidden cannot be combined with --allow-discards." msgstr "Tùy chọn --tcrypt-hidden không thể được tổ hợp cùng với --allow-discards.\n" #: src/cryptsetup.c:3981 #, fuzzy #| msgid "Option --veracrypt is supported only for TCRYPT device type.\n" msgid "Option --veracrypt is supported only for TCRYPT device type." msgstr "Tùy chọn --veracrypt chỉ được hỗ trợ trên thiết bị TCRYPT.\n" #: src/cryptsetup.c:3987 msgid "Invalid argument for parameter --veracrypt-pim supplied." msgstr "" #: src/cryptsetup.c:3991 #, fuzzy #| msgid "Option --veracrypt is supported only for TCRYPT device type.\n" msgid "Option --veracrypt-pim is supported only for VeraCrypt compatible devices." msgstr "Tùy chọn --veracrypt chỉ được hỗ trợ trên thiết bị TCRYPT.\n" #: src/cryptsetup.c:3999 #, fuzzy #| msgid "Option --veracrypt is supported only for TCRYPT device type.\n" msgid "Option --veracrypt-query-pim is supported only for VeraCrypt compatible devices." msgstr "Tùy chọn --veracrypt chỉ được hỗ trợ trên thiết bị TCRYPT.\n" #: src/cryptsetup.c:4003 msgid "The options --veracrypt-pim and --veracrypt-query-pim are mutually exclusive." msgstr "" #: src/cryptsetup.c:4010 msgid "Option --priority can be only ignore/normal/prefer." msgstr "" #: src/cryptsetup.c:4015 src/cryptsetup.c:4053 msgid "Keyslot specification is required." msgstr "" #: src/cryptsetup.c:4020 src/cryptsetup_reencrypt.c:1713 msgid "Password-based key derivation function (PBKDF) can be only pbkdf2 or argon2i/argon2id." msgstr "" #: src/cryptsetup.c:4025 src/cryptsetup_reencrypt.c:1718 msgid "PBKDF forced iterations cannot be combined with iteration time option." msgstr "" #: src/cryptsetup.c:4031 #, fuzzy #| msgid "This operation is not supported for this device type.\n" msgid "Sector size option is not supported for this command." msgstr "Thao tác này không được hỗ trợ cho kiểu thiết bị này.\n" #: src/cryptsetup.c:4043 msgid "Large IV sectors option is supported only for opening plain type device with sector size larger than 512 bytes." msgstr "" #: src/cryptsetup.c:4048 msgid "Key size is required with --unbound option." msgstr "" #: src/cryptsetup.c:4058 msgid "Option --unbound may be used only with luksAddKey and luksDump actions." msgstr "" #: src/cryptsetup.c:4063 #, fuzzy #| msgid "Option --keep-key can be used only with --hash or --iter-time." msgid "Option --refresh may be used only with open action." msgstr "Tùy chọn “--keep-key” có thể dùng với “--hash” hoặc “--iter-time”." #: src/cryptsetup.c:4074 msgid "Cannot disable metadata locking." msgstr "" #: src/cryptsetup.c:4085 #, fuzzy #| msgid "Invalid device size specification." msgid "Invalid max reencryption hotzone size specification." msgstr "Đặc tả kích thước thiết bị không đúng." #: src/cryptsetup.c:4093 src/cryptsetup_reencrypt.c:1742 #: src/cryptsetup_reencrypt.c:1747 msgid "Invalid device size specification." msgstr "Đặc tả kích thước thiết bị không đúng." #: src/cryptsetup.c:4096 #, fuzzy #| msgid "Maximum device reduce size is 64 MiB." msgid "Maximum device reduce size is 1 GiB." msgstr "Kích thước thu nhỏ thiết bị tối đa là 64 MiB." #: src/cryptsetup.c:4099 src/cryptsetup_reencrypt.c:1753 msgid "Reduce size must be multiple of 512 bytes sector." msgstr "Kích cỡ giảm phải là bội số cung từ (sector) 512 byte" #: src/cryptsetup.c:4104 #, fuzzy #| msgid "Invalid device size specification." msgid "Invalid data size specification." msgstr "Đặc tả kích thước thiết bị không đúng." #: src/cryptsetup.c:4109 #, fuzzy #| msgid "Device offset overflow.\n" msgid "Reduce size overflow." msgstr "Khoảng bù (offset) thiết bị bị tràn.\n" #: src/cryptsetup.c:4113 msgid "LUKS2 decryption requires option --header." msgstr "" #: src/cryptsetup.c:4117 #, fuzzy #| msgid "Reduce size must be multiple of 512 bytes sector." msgid "Device size must be multiple of 512 bytes sector." msgstr "Kích cỡ giảm phải là bội số cung từ (sector) 512 byte" #: src/cryptsetup.c:4121 msgid "Options --reduce-device-size and --data-size cannot be combined." msgstr "" #: src/cryptsetup.c:4125 msgid "Options --device-size and --size cannot be combined." msgstr "" #: src/cryptsetup.c:4129 #, fuzzy #| msgid "Option --ignore-corruption and --restart-on-corruption cannot be used together.\n" msgid "Options --keyslot-cipher and --keyslot-key-size must be used together." msgstr "Không được dùng các tùy chọn --ignore-corruption và --restart-on-corruption cùng một lúc.\n" #: src/veritysetup.c:76 #, fuzzy #| msgid "Invalid salt string specified.\n" msgid "Invalid salt string specified." msgstr "Chuỗi salt (muối) đã cho không hợp lệ.\n" #: src/veritysetup.c:107 #, fuzzy, c-format #| msgid "Cannot create hash image %s for writing.\n" msgid "Cannot create hash image %s for writing." msgstr "Không thể tạo ảnh băm %s để ghi.\n" #: src/veritysetup.c:117 #, fuzzy, c-format #| msgid "Cannot create hash image %s for writing.\n" msgid "Cannot create FEC image %s for writing." msgstr "Không thể tạo ảnh băm %s để ghi.\n" #: src/veritysetup.c:191 #, fuzzy #| msgid "Invalid root hash string specified.\n" msgid "Invalid root hash string specified." msgstr "Chuỗi mã băm gốc (thư mục root) đã chỉ ra không hợp lệ.\n" #: src/veritysetup.c:199 #, fuzzy, c-format #| msgid "Invalid device %s.\n" msgid "Invalid signature file %s." msgstr "Thiết bị không đúng %s.\n" #: src/veritysetup.c:206 #, fuzzy, c-format #| msgid "Cannot read keyfile %s.\n" msgid "Cannot read signature file %s." msgstr "Không thể đọc tập-tin khóa %s.\n" #: src/veritysetup.c:406 msgid " " msgstr " " #: src/veritysetup.c:406 src/integritysetup.c:492 msgid "format device" msgstr "định dạng thiết bị" #: src/veritysetup.c:407 msgid " " msgstr " " #: src/veritysetup.c:407 msgid "verify device" msgstr "thẩm tra thiết bị" #: src/veritysetup.c:408 #, fuzzy #| msgid " " msgid " " msgstr " " #: src/veritysetup.c:410 src/integritysetup.c:495 msgid "show active device status" msgstr "hiển thị trạng thái các thiết bị đang hoạt động" #: src/veritysetup.c:411 msgid "" msgstr "" #: src/veritysetup.c:411 src/integritysetup.c:496 msgid "show on-disk information" msgstr "hiển thị thông tin trên-đĩa" #: src/veritysetup.c:430 #, c-format msgid "" "\n" " is the device to create under %s\n" " is the data device\n" " is the device containing verification data\n" " hash of the root node on \n" msgstr "" "\n" " là thiết bị để tạo dưới %s\n" " là thiết bị dữ liệu\n" " là thiết bị chứa dữ liệu xác thực\n" " mã băm của nút root (gốc) trên \n" #: src/veritysetup.c:437 #, c-format msgid "" "\n" "Default compiled-in dm-verity parameters:\n" "\tHash: %s, Data block (bytes): %u, Hash block (bytes): %u, Salt size: %u, Hash format: %u\n" msgstr "" "\n" "Các tham số dm-verity dựng sẵn mặc định:\n" "\tBăm: %s, Khối dữ liệu (bytes): %u, Khối băm (bytes): %u, Kích thước muối: %u, Định dạng băm: %u\n" #: src/veritysetup.c:481 msgid "Do not use verity superblock" msgstr "Không sử dụng siêu khối thẩm định" #: src/veritysetup.c:482 msgid "Format type (1 - normal, 0 - original Chrome OS)" msgstr "Kiểu định dạng (1 - thông thường, 0 - Chrome OS)" #: src/veritysetup.c:482 msgid "number" msgstr "số" #: src/veritysetup.c:483 msgid "Block size on the data device" msgstr "Kích cỡ khối trên thiết bị dữ liệu" #: src/veritysetup.c:484 msgid "Block size on the hash device" msgstr "Kích cỡ của khối trên thiết bị băm" #: src/veritysetup.c:485 msgid "FEC parity bytes" msgstr "" #: src/veritysetup.c:486 msgid "The number of blocks in the data file" msgstr "Số lượng khối trong tập tin dữ liệu" #: src/veritysetup.c:486 msgid "blocks" msgstr "khối" #: src/veritysetup.c:487 msgid "Path to device with error correction data" msgstr "" #: src/veritysetup.c:487 src/integritysetup.c:566 msgid "path" msgstr "" #: src/veritysetup.c:488 msgid "Starting offset on the hash device" msgstr "Khoảng bù (offset) khởi đầu của thiết bị băm" #: src/veritysetup.c:489 #, fuzzy #| msgid "Starting offset on the hash device" msgid "Starting offset on the FEC device" msgstr "Khoảng bù (offset) khởi đầu của thiết bị băm" #: src/veritysetup.c:490 msgid "Hash algorithm" msgstr "Thuật toán băm" #: src/veritysetup.c:490 msgid "string" msgstr "chuỗi" #: src/veritysetup.c:491 msgid "Salt" msgstr "Muối" #: src/veritysetup.c:491 msgid "hex string" msgstr "chuỗi hex (thập lục phân)" #: src/veritysetup.c:493 #, fuzzy #| msgid "Creation of hash area failed.\n" msgid "Path to root hash signature file" msgstr "Việc tạo vùng dữ liệu băm gặp lỗi.\n" #: src/veritysetup.c:494 msgid "Restart kernel if corruption is detected" msgstr "Khởi động lại nhân nếu thấy có sai hỏng" #: src/veritysetup.c:495 #, fuzzy #| msgid "Restart kernel if corruption is detected" msgid "Panic kernel if corruption is detected" msgstr "Khởi động lại nhân nếu thấy có sai hỏng" #: src/veritysetup.c:496 msgid "Ignore corruption, log it only" msgstr "Bỏ qua sai hỏng, chỉ ghi nhật ký lại" #: src/veritysetup.c:497 msgid "Do not verify zeroed blocks" msgstr "Không thẩm tra các khối không" #: src/veritysetup.c:498 msgid "Verify data block only the first time it is read" msgstr "" #: src/veritysetup.c:600 #, fuzzy #| msgid "Option --ignore-corruption, --restart-on-corruption or --ignore-zero-blocks is allowed only for create operation.\n" msgid "Option --ignore-corruption, --restart-on-corruption or --ignore-zero-blocks is allowed only for open operation." msgstr "Tùy chọn --ignore-corruption, --restart-on-corruption hay --ignore-zero-blocks chỉ được phép dùng cho thao tác tạo.\n" #: src/veritysetup.c:605 #, fuzzy #| msgid "Option --allow-discards is allowed only for open operation.\n" msgid "Option --root-hash-signature can be used only for open operation." msgstr "Tùy chọn “--allow-discards” chỉ cho phép với thao tác mở.\n" #: src/veritysetup.c:610 #, fuzzy #| msgid "Option --ignore-corruption and --restart-on-corruption cannot be used together.\n" msgid "Option --ignore-corruption and --restart-on-corruption cannot be used together." msgstr "Không được dùng các tùy chọn --ignore-corruption và --restart-on-corruption cùng một lúc.\n" #: src/veritysetup.c:615 #, fuzzy #| msgid "Option --ignore-corruption and --restart-on-corruption cannot be used together.\n" msgid "Option --panic-on-corruption and --restart-on-corruption cannot be used together." msgstr "Không được dùng các tùy chọn --ignore-corruption và --restart-on-corruption cùng một lúc.\n" #: src/integritysetup.c:85 #, fuzzy, c-format #| msgid "Invalid key size %d.\n" msgid "Invalid key size. Maximum is %u bytes." msgstr "Kích cỡ khóa không đúng %d.\n" #: src/integritysetup.c:95 src/utils_password.c:339 #, fuzzy, c-format #| msgid "Cannot read keyfile %s.\n" msgid "Cannot read keyfile %s." msgstr "Không thể đọc tập-tin khóa %s.\n" #: src/integritysetup.c:99 src/utils_password.c:344 #, fuzzy, c-format #| msgid "Cannot read %d bytes from keyfile %s.\n" msgid "Cannot read %d bytes from keyfile %s." msgstr "Không thể đọc %d byte từ tập tin khóa %s.\n" #: src/integritysetup.c:266 #, c-format msgid "Formatted with tag size %u, internal integrity %s.\n" msgstr "" #: src/integritysetup.c:492 src/integritysetup.c:496 #, fuzzy #| msgid "verify device" msgid "" msgstr "thẩm tra thiết bị" #: src/integritysetup.c:493 msgid " " msgstr "" #: src/integritysetup.c:515 #, fuzzy, c-format #| msgid "" #| "\n" #| " is the device to create under %s\n" #| " is the data device\n" #| " is the device containing verification data\n" #| " hash of the root node on \n" msgid "" "\n" " is the device to create under %s\n" " is the device containing data with integrity tags\n" msgstr "" "\n" " là thiết bị để tạo dưới %s\n" " là thiết bị dữ liệu\n" " là thiết bị chứa dữ liệu xác thực\n" " mã băm của nút root (gốc) trên \n" #: src/integritysetup.c:520 #, c-format msgid "" "\n" "Default compiled-in dm-integrity parameters:\n" "\tChecksum algorithm: %s\n" "\tMaximum keyfile size: %dkB\n" msgstr "" #: src/integritysetup.c:566 msgid "Path to data device (if separated)" msgstr "" #: src/integritysetup.c:568 msgid "Journal size" msgstr "" #: src/integritysetup.c:569 msgid "Interleave sectors" msgstr "" #: src/integritysetup.c:570 msgid "Journal watermark" msgstr "" #: src/integritysetup.c:570 msgid "percent" msgstr "" #: src/integritysetup.c:571 msgid "Journal commit time" msgstr "" #: src/integritysetup.c:571 src/integritysetup.c:573 msgid "ms" msgstr "" #: src/integritysetup.c:572 msgid "Number of 512-byte sectors per bit (bitmap mode)." msgstr "" #: src/integritysetup.c:573 msgid "Bitmap mode flush time" msgstr "" #: src/integritysetup.c:574 msgid "Tag size (per-sector)" msgstr "" #: src/integritysetup.c:575 msgid "Sector size" msgstr "" #: src/integritysetup.c:576 msgid "Buffers size" msgstr "" #: src/integritysetup.c:578 msgid "Data integrity algorithm" msgstr "" #: src/integritysetup.c:579 #, fuzzy #| msgid "The size of the encryption key" msgid "The size of the data integrity key" msgstr "Kích cỡ của khóa mã hóa" #: src/integritysetup.c:580 #, fuzzy #| msgid "Read the key from a file." msgid "Read the integrity key from a file" msgstr "Đọc khóa từ một tập tin." #: src/integritysetup.c:582 msgid "Journal integrity algorithm" msgstr "" #: src/integritysetup.c:583 #, fuzzy #| msgid "The size of the encryption key" msgid "The size of the journal integrity key" msgstr "Kích cỡ của khóa mã hóa" #: src/integritysetup.c:584 #, fuzzy #| msgid "Read the key from a file." msgid "Read the journal integrity key from a file" msgstr "Đọc khóa từ một tập tin." #: src/integritysetup.c:586 msgid "Journal encryption algorithm" msgstr "" #: src/integritysetup.c:587 #, fuzzy #| msgid "The size of the encryption key" msgid "The size of the journal encryption key" msgstr "Kích cỡ của khóa mã hóa" #: src/integritysetup.c:588 #, fuzzy #| msgid "Read the key from a file." msgid "Read the journal encryption key from a file" msgstr "Đọc khóa từ một tập tin." #: src/integritysetup.c:591 msgid "Recovery mode (no journal, no tag checking)" msgstr "" #: src/integritysetup.c:592 msgid "Use bitmap to track changes and disable journal for integrity device" msgstr "" #: src/integritysetup.c:593 msgid "Recalculate initial tags automatically." msgstr "" #: src/integritysetup.c:596 msgid "Do not protect superblock with HMAC (old kernels)" msgstr "" #: src/integritysetup.c:597 msgid "Allow recalculating of volumes with HMAC keys (old kernels)" msgstr "" #: src/integritysetup.c:672 #, fuzzy #| msgid "Option --allow-discards is allowed only for open operation.\n" msgid "Option --integrity-recalculate can be used only for open action." msgstr "Tùy chọn “--allow-discards” chỉ cho phép với thao tác mở.\n" #: src/integritysetup.c:692 msgid "Options --journal-size, --interleave-sectors, --sector-size, --tag-size and --no-wipe can be used only for format action." msgstr "" #: src/integritysetup.c:698 #, fuzzy #| msgid "Invalid device size specification." msgid "Invalid journal size specification." msgstr "Đặc tả kích thước thiết bị không đúng." #: src/integritysetup.c:703 msgid "Both key file and key size options must be specified." msgstr "" #: src/integritysetup.c:708 msgid "Both journal integrity key file and key size options must be specified." msgstr "" #: src/integritysetup.c:711 msgid "Journal integrity algorithm must be specified if journal integrity key is used." msgstr "" #: src/integritysetup.c:716 msgid "Both journal encryption key file and key size options must be specified." msgstr "" #: src/integritysetup.c:719 msgid "Journal encryption algorithm must be specified if journal encryption key is used." msgstr "" #: src/integritysetup.c:723 msgid "Recovery and bitmap mode options are mutually exclusive." msgstr "" #: src/integritysetup.c:727 msgid "Journal options cannot be used in bitmap mode." msgstr "" #: src/integritysetup.c:731 msgid "Bitmap options can be used only in bitmap mode." msgstr "" #: src/cryptsetup_reencrypt.c:190 #, fuzzy #| msgid "Reencryption block size" msgid "Reencryption already in-progress." msgstr "Kích thước khối mã hóa lại" #: src/cryptsetup_reencrypt.c:226 #, fuzzy, c-format #| msgid "Cannot exclusively open %s, device in use.\n" msgid "Cannot exclusively open %s, device in use." msgstr "Không thể mở %s một cách đệ qui, thiết bị vẫn đang được sử dụng.\n" #: src/cryptsetup_reencrypt.c:240 src/cryptsetup_reencrypt.c:1153 #, fuzzy #| msgid "Allocation of aligned memory failed.\n" msgid "Allocation of aligned memory failed." msgstr "Phân bổ bộ nhớ điều chỉnh gặp lỗi.\n" #: src/cryptsetup_reencrypt.c:247 #, fuzzy, c-format #| msgid "Cannot read device %s.\n" msgid "Cannot read device %s." msgstr "Không thể đọc thiết bị %s.\n" #: src/cryptsetup_reencrypt.c:258 #, fuzzy, c-format #| msgid "Marking LUKS device %s unusable.\n" msgid "Marking LUKS1 device %s unusable." msgstr "Đánh dấu thiết bị LUKS %s là không thể dùng.\n" #: src/cryptsetup_reencrypt.c:262 #, c-format msgid "Setting LUKS2 offline reencrypt flag on device %s." msgstr "" #: src/cryptsetup_reencrypt.c:279 #, fuzzy, c-format #| msgid "Cannot write device %s.\n" msgid "Cannot write device %s." msgstr "Không thể ghi thiết bị %s.\n" #: src/cryptsetup_reencrypt.c:327 #, fuzzy #| msgid "Cannot write reencryption log file.\n" msgid "Cannot write reencryption log file." msgstr "Không thể ghi tập tin nhật ký reencryption (mã hóa lại).\n" #: src/cryptsetup_reencrypt.c:383 #, fuzzy #| msgid "Cannot read reencryption log file.\n" msgid "Cannot read reencryption log file." msgstr "Không đọc được tập tin nhật ký reencryption.\n" #: src/cryptsetup_reencrypt.c:421 #, c-format msgid "Log file %s exists, resuming reencryption.\n" msgstr "Tập tin nhật ký %s đã có sẵn rồi, giả định là reencryption (mã hóa lại).\n" #: src/cryptsetup_reencrypt.c:470 #, fuzzy #| msgid "Activating temporary device using old LUKS header.\n" msgid "Activating temporary device using old LUKS header." msgstr "Hoạt hóa thiết bị tạm thời sử dụng phần đầu LUKS kiểu cũ.\n" #: src/cryptsetup_reencrypt.c:480 #, fuzzy #| msgid "Activating temporary device using new LUKS header.\n" msgid "Activating temporary device using new LUKS header." msgstr "Hoạt hóa thiết bị tạm thời sử dụng phần đầu LUKS kiểu mới.\n" #: src/cryptsetup_reencrypt.c:490 #, fuzzy #| msgid "Activation of temporary devices failed.\n" msgid "Activation of temporary devices failed." msgstr "Việc hoạt hóa các thiết bị tạm thời gặp lỗi.\n" #: src/cryptsetup_reencrypt.c:577 #, fuzzy #| msgid "Failed to stat key file.\n" msgid "Failed to set data offset." msgstr "Gặp lỗi khi lấy thông tin tập tin khóa.\n" #: src/cryptsetup_reencrypt.c:583 #, fuzzy #| msgid "Failed to stat key file.\n" msgid "Failed to set metadata size." msgstr "Gặp lỗi khi lấy thông tin tập tin khóa.\n" #: src/cryptsetup_reencrypt.c:591 #, fuzzy, c-format #| msgid "New LUKS header for device %s created.\n" msgid "New LUKS header for device %s created." msgstr "Phần đầu LUKS mới cho thiết bị %s được tạo.\n" #: src/cryptsetup_reencrypt.c:651 #, c-format msgid "This version of cryptsetup-reencrypt can't handle new internal token type %s." msgstr "" #: src/cryptsetup_reencrypt.c:673 msgid "Failed to read activation flags from backup header." msgstr "" #: src/cryptsetup_reencrypt.c:677 #, fuzzy #| msgid "Failed to write to key storage.\n" msgid "Failed to write activation flags to new header." msgstr "Lỗi ghi khóa vào kho lưu khóa.\n" #: src/cryptsetup_reencrypt.c:681 src/cryptsetup_reencrypt.c:685 #, fuzzy #| msgid "Failed to read from key storage.\n" msgid "Failed to read requirements from backup header." msgstr "Lỗi đọc từ kho lưu khóa.\n" #: src/cryptsetup_reencrypt.c:723 #, fuzzy, c-format #| msgid "LUKS header backup of device %s created.\n" msgid "%s header backup of device %s created." msgstr "Phần đầu sao lưu LUKS của thiết bị %s được tạo.\n" #: src/cryptsetup_reencrypt.c:786 #, fuzzy #| msgid "Creation of LUKS backup headers failed.\n" msgid "Creation of LUKS backup headers failed." msgstr "Việc tạo phần đầu LUKS sao lưu dự phòng gặp lỗi.\n" #: src/cryptsetup_reencrypt.c:919 #, fuzzy, c-format #| msgid "Cannot restore LUKS header on device %s.\n" msgid "Cannot restore %s header on device %s." msgstr "Không thể phục hồi phần đầu LUKS trên thiết bị %s.\n" #: src/cryptsetup_reencrypt.c:921 #, fuzzy, c-format #| msgid "LUKS header on device %s restored.\n" msgid "%s header on device %s restored." msgstr "Phần đầu LUKS trên thiết bị %s đã được phục hồi.\n" #: src/cryptsetup_reencrypt.c:1125 src/cryptsetup_reencrypt.c:1131 #, fuzzy #| msgid "Cannot open temporary LUKS device.\n" msgid "Cannot open temporary LUKS device." msgstr "Không thể r thiết bị LUKS tạm thời.\n" #: src/cryptsetup_reencrypt.c:1136 src/cryptsetup_reencrypt.c:1141 #, fuzzy #| msgid "Cannot get device size.\n" msgid "Cannot get device size." msgstr "Không thể lấy kích cỡ thiết bị.\n" #: src/cryptsetup_reencrypt.c:1176 #, fuzzy #| msgid "IO error during reencryption.\n" msgid "IO error during reencryption." msgstr "Lỗi IO (vào/ra) trong quá trình mã hóa lại.\n" #: src/cryptsetup_reencrypt.c:1207 #, fuzzy #| msgid "Provided UUID is invalid.\n" msgid "Provided UUID is invalid." msgstr "UUID đã cung cấp không hợp lệ.\n" #: src/cryptsetup_reencrypt.c:1441 #, fuzzy #| msgid "Cannot open reencryption log file.\n" msgid "Cannot open reencryption log file." msgstr "Không mở được tập tin nhật ký reencryption.\n" #: src/cryptsetup_reencrypt.c:1447 #, fuzzy #| msgid "No decryption in progress, provided UUID can be used only to resume suspended decryption process.\n" msgid "No decryption in progress, provided UUID can be used only to resume suspended decryption process." msgstr "Không có quá trình giải mã nào đang xử lý, UUID đã cung cấp có thể chỉ được dùng để phục hồi lại tiến trình giải mã đã tạm dừng.\n" #: src/cryptsetup_reencrypt.c:1522 #, c-format msgid "Changed pbkdf parameters in keyslot %i." msgstr "" #: src/cryptsetup_reencrypt.c:1636 msgid "Reencryption block size" msgstr "Kích thước khối mã hóa lại" #: src/cryptsetup_reencrypt.c:1636 msgid "MiB" msgstr "MiB" #: src/cryptsetup_reencrypt.c:1640 #, fuzzy #| msgid "Do not change key, no data area reencryption." msgid "Do not change key, no data area reencryption" msgstr "Khôngười thay đổi khóa, không có mã hóa lại vùng dữ liệu." #: src/cryptsetup_reencrypt.c:1642 #, fuzzy #| msgid "Read the volume (master) key from file." msgid "Read new volume (master) key from file" msgstr "Đọc khóa khối tin (chủ) từ tập tin." #: src/cryptsetup_reencrypt.c:1643 msgid "PBKDF2 iteration time for LUKS (in ms)" msgstr "Thời gian lặp lại PBKDF2 cho LUKS (theo mili-giây)" #: src/cryptsetup_reencrypt.c:1649 #, fuzzy #| msgid "Use direct-io when accessing devices." msgid "Use direct-io when accessing devices" msgstr "Sử dụng vào ra trực tiếp khi truy cập các thiết bị." #: src/cryptsetup_reencrypt.c:1650 #, fuzzy #| msgid "Use fsync after each block." msgid "Use fsync after each block" msgstr "Sử dụng fsync sau mỗi khối." #: src/cryptsetup_reencrypt.c:1651 #, fuzzy #| msgid "Update log file after every block." msgid "Update log file after every block" msgstr "Cập nhật tập tin nhật ký sau mỗi khối." #: src/cryptsetup_reencrypt.c:1652 #, fuzzy #| msgid "Use only this slot (others will be disabled)." msgid "Use only this slot (others will be disabled)" msgstr "Chỉ sử dụng khe này (những cái khác sẽ bị tắt đi)." #: src/cryptsetup_reencrypt.c:1657 #, fuzzy #| msgid "Create new header on not encrypted device." msgid "Create new header on not encrypted device" msgstr "Tạo phần đầu mới không trên thiết bị được mã hóa." #: src/cryptsetup_reencrypt.c:1658 #, fuzzy #| msgid "Permanently decrypt device (remove encryption)." msgid "Permanently decrypt device (remove encryption)" msgstr "Thiết bị mã hóa cố định (gỡ bỏ mã hóa)." #: src/cryptsetup_reencrypt.c:1659 #, fuzzy #| msgid "The uuid used to resume decryption." msgid "The UUID used to resume decryption" msgstr "uuid được dùng để khôi phục việc giải mã." #: src/cryptsetup_reencrypt.c:1660 #, fuzzy #| msgid "Type of device metadata: luks, plain, loopaes, tcrypt." msgid "Type of LUKS metadata: luks1, luks2" msgstr "Kiểu của siêu dữ liệu thiết bị: luks, plain, loopaes, tcrypt." #: src/cryptsetup_reencrypt.c:1679 msgid "[OPTION...] " msgstr "[TÙY_CHỌN…] " #: src/cryptsetup_reencrypt.c:1687 #, fuzzy, c-format #| msgid "Reencryption will change: volume key%s%s%s%s.\n" msgid "Reencryption will change: %s%s%s%s%s%s." msgstr "Reencryption sẽ thay đổi: khóa dung lượng%s%s%s%s.\n" #: src/cryptsetup_reencrypt.c:1688 msgid "volume key" msgstr "" #: src/cryptsetup_reencrypt.c:1690 #, fuzzy #| msgid ", set hash to " msgid "set hash to " msgstr ", đặt kiểu băm thành " #: src/cryptsetup_reencrypt.c:1691 msgid ", set cipher to " msgstr ", đặt kiểu mã hóa thành " #: src/cryptsetup_reencrypt.c:1695 msgid "Argument required." msgstr "Cần đối số." #: src/cryptsetup_reencrypt.c:1723 msgid "Only values between 1 MiB and 64 MiB allowed for reencryption block size." msgstr "Chỉ những giá trị nằm giữa 1MiB và 64 MiB là cho phép đối với kích thước khối reencryption (mã hóa lại)." #: src/cryptsetup_reencrypt.c:1750 msgid "Maximum device reduce size is 64 MiB." msgstr "Kích thước thu nhỏ thiết bị tối đa là 64 MiB." #: src/cryptsetup_reencrypt.c:1757 #, fuzzy #| msgid "Option --new must be used together with --reduce-device-size." msgid "Option --new must be used together with --reduce-device-size or --header." msgstr "Tùy chọn “--new” phải được sử dụng cùng với “--reduce-device-size”." #: src/cryptsetup_reencrypt.c:1761 #, fuzzy #| msgid "Option --keep-key can be used only with --hash or --iter-time." msgid "Option --keep-key can be used only with --hash, --iter-time or --pbkdf-force-iterations." msgstr "Tùy chọn “--keep-key” có thể dùng với “--hash” hoặc “--iter-time”." #: src/cryptsetup_reencrypt.c:1765 msgid "Option --new cannot be used together with --decrypt." msgstr "Tùy chọn “--new” không được sử dụng cùng với “ --decrypt”." #: src/cryptsetup_reencrypt.c:1769 msgid "Option --decrypt is incompatible with specified parameters." msgstr "Tùy chọn --decrypt không tương thích với các đối số đã cho." #: src/cryptsetup_reencrypt.c:1773 msgid "Option --uuid is allowed only together with --decrypt." msgstr "Tùy chọn “--uuid” chỉ được sử dụng cùng với “ --decrypt”." #: src/cryptsetup_reencrypt.c:1777 msgid "Invalid luks type. Use one of these: 'luks', 'luks1' or 'luks2'." msgstr "" #: src/utils_tools.c:151 #, fuzzy #| msgid "Error reading response from terminal.\n" msgid "Error reading response from terminal." msgstr "Gặp lỗi khi đọc phản hồi từ thiết bị cuối.\n" #: src/utils_tools.c:186 msgid "Command successful.\n" msgstr "Câu lệnh đã chạy thành công.\n" #: src/utils_tools.c:194 msgid "wrong or missing parameters" msgstr "" #: src/utils_tools.c:196 #, fuzzy #| msgid "Enter any passphrase: " msgid "no permission or bad passphrase" msgstr "Nhập bất cứ cụm từ mật khẩu nào: " #: src/utils_tools.c:198 #, fuzzy #| msgid "Cannot unlock memory.\n" msgid "out of memory" msgstr "Không thể mở khóa bộ nhớ.\n" #: src/utils_tools.c:200 msgid "wrong device or file specified" msgstr "" #: src/utils_tools.c:202 #, fuzzy #| msgid "Device %s already exists.\n" msgid "device already exists or device is busy" msgstr "Thiết bị %s đã sẵn có.\n" #: src/utils_tools.c:204 msgid "unknown error" msgstr "" #: src/utils_tools.c:206 #, fuzzy, c-format #| msgid "Command failed with code %i" msgid "Command failed with code %i (%s).\n" msgstr "Câu lệnh đã thất bại với mã %i" #: src/utils_tools.c:284 #, fuzzy, c-format #| msgid "Key slot %d changed.\n" msgid "Key slot %i created." msgstr "Khe khóa %d đã thay đổi.\n" #: src/utils_tools.c:286 #, fuzzy, c-format #| msgid "Key slot %d unlocked.\n" msgid "Key slot %i unlocked." msgstr "Khe khóa %d được mở khóa.\n" #: src/utils_tools.c:288 #, fuzzy, c-format #| msgid "Key slot %d unlocked.\n" msgid "Key slot %i removed." msgstr "Khe khóa %d được mở khóa.\n" #: src/utils_tools.c:297 #, c-format msgid "Token %i created." msgstr "" #: src/utils_tools.c:299 #, c-format msgid "Token %i removed." msgstr "" #: src/utils_tools.c:465 msgid "" "\n" "Wipe interrupted." msgstr "" #: src/utils_tools.c:476 #, c-format msgid "WARNING: Device %s already contains a '%s' partition signature.\n" msgstr "" #: src/utils_tools.c:484 #, c-format msgid "WARNING: Device %s already contains a '%s' superblock signature.\n" msgstr "" #: src/utils_tools.c:505 src/utils_tools.c:569 #, fuzzy #| msgid "Failed to obtain device mapper directory." msgid "Failed to initialize device signature probes." msgstr "Lỗi lấy thư mục trình ánh xạ thiết bị." #: src/utils_tools.c:549 #, fuzzy, c-format #| msgid "Failed to stat key file.\n" msgid "Failed to stat device %s." msgstr "Gặp lỗi khi lấy thông tin tập tin khóa.\n" #: src/utils_tools.c:562 #, c-format msgid "Device %s is in use. Can not proceed with format operation." msgstr "" #: src/utils_tools.c:564 #, c-format msgid "Failed to open file %s in read/write mode." msgstr "" #: src/utils_tools.c:578 #, c-format msgid "Existing '%s' partition signature (offset: % bytes) on device %s will be wiped." msgstr "" #: src/utils_tools.c:581 #, c-format msgid "Existing '%s' superblock signature (offset: % bytes) on device %s will be wiped." msgstr "" #: src/utils_tools.c:584 #, fuzzy #| msgid "Failed to write to key storage.\n" msgid "Failed to wipe device signature." msgstr "Lỗi ghi khóa vào kho lưu khóa.\n" #: src/utils_tools.c:591 #, fuzzy, c-format #| msgid "Failed to obtain device mapper directory." msgid "Failed to probe device %s for a signature." msgstr "Lỗi lấy thư mục trình ánh xạ thiết bị." #: src/utils_tools.c:622 #, fuzzy #| msgid "Reencryption block size" msgid "" "\n" "Reencryption interrupted." msgstr "Kích thước khối mã hóa lại" #: src/utils_password.c:43 src/utils_password.c:76 #, fuzzy, c-format #| msgid "Cannot check password quality: %s\n" msgid "Cannot check password quality: %s" msgstr "Không thể kiểm tra chất lượng mật khẩu: %s\n" #: src/utils_password.c:51 #, fuzzy, c-format #| msgid "" #| "Password quality check failed:\n" #| " %s\n" msgid "" "Password quality check failed:\n" " %s" msgstr "" "Chất lượng mật khẩu không đạt:\n" " %s\n" #: src/utils_password.c:83 #, fuzzy, c-format #| msgid "Password quality check failed: Bad passphrase (%s)\n" msgid "Password quality check failed: Bad passphrase (%s)" msgstr "Gặp lỗi khi kiểm tra chất lượng mật khẩu: mật khẩu sai (%s)\n" #: src/utils_password.c:228 src/utils_password.c:242 #, fuzzy #| msgid "Error reading passphrase from terminal.\n" msgid "Error reading passphrase from terminal." msgstr "Gặp lỗi khi đọc cụm từ mật khẩu từ thiết bị cuối.\n" #: src/utils_password.c:240 msgid "Verify passphrase: " msgstr "Nhập lại mật khẩu: " #: src/utils_password.c:247 #, fuzzy #| msgid "Passphrases do not match.\n" msgid "Passphrases do not match." msgstr "Hai cụm từ mật khẩu không trùng nhau.\n" #: src/utils_password.c:284 #, fuzzy #| msgid "Cannot use offset with terminal input.\n" msgid "Cannot use offset with terminal input." msgstr "Không thể sử dụng khoảng bù (offset) với đầu vào là thiết bị cuối.\n" #: src/utils_password.c:287 #, c-format msgid "Enter passphrase: " msgstr "Gõ cụm từ mật khẩu: " #: src/utils_password.c:290 #, c-format msgid "Enter passphrase for %s: " msgstr "Nhập cụm từ mật khẩu cho %s: " #: src/utils_password.c:321 #, fuzzy #| msgid "No key available with this passphrase.\n" msgid "No key available with this passphrase." msgstr "Không có khóa sẵn sàng dùng với cụm từ mật khẩu này.\n" #: src/utils_password.c:323 msgid "No usable keyslot is available." msgstr "" #: src/utils_password.c:365 #, fuzzy, c-format #| msgid "Cannot open file %s.\n" msgid "Cannot open keyfile %s for write." msgstr "Không thể mở tập tin %s.\n" #: src/utils_password.c:372 #, fuzzy, c-format #| msgid "Cannot read keyfile %s.\n" msgid "Cannot write to keyfile %s." msgstr "Không thể đọc tập-tin khóa %s.\n" #: src/utils_luks2.c:47 #, fuzzy, c-format #| msgid "Failed to open key file.\n" msgid "Failed to open file %s in read-only mode." msgstr "Gặp lỗi khi mở tập tin khóa.\n" #: src/utils_luks2.c:60 msgid "Provide valid LUKS2 token JSON:\n" msgstr "" #: src/utils_luks2.c:67 #, fuzzy #| msgid "Failed to open key file.\n" msgid "Failed to read JSON file." msgstr "Gặp lỗi khi mở tập tin khóa.\n" #: src/utils_luks2.c:72 #, fuzzy #| msgid "VERITY header corrupted.\n" msgid "" "\n" "Read interrupted." msgstr "phần đầu VERITY sai hỏng.\n" #: src/utils_luks2.c:113 #, fuzzy, c-format #| msgid "Failed to open key file.\n" msgid "Failed to open file %s in write mode." msgstr "Gặp lỗi khi mở tập tin khóa.\n" #: src/utils_luks2.c:122 msgid "" "\n" "Write interrupted." msgstr "" #: src/utils_luks2.c:126 #, fuzzy #| msgid "Failed to open key file.\n" msgid "Failed to write JSON file." msgstr "Gặp lỗi khi mở tập tin khóa.\n" #~ msgid "Replaced with key slot %d.\n" #~ msgstr "Đã thay thế với khe khóa %d.\n" #~ msgid "Function not available in FIPS mode.\n" #~ msgstr "Chức năng không khả dụng trong chế độ “FIPS”.\n" #~ msgid "Invalid size parameters for verity device.\n" #~ msgstr "Các tham số kích thước cho thiết bị xác thực không hợp lệ.\n" #~ msgid "Too many tree levels for verity volume.\n" #~ msgstr "Có quá nhiều mức cây cho mỗi vùng xác thực.\n" #~ msgid "memory allocation error in action_luksFormat" #~ msgstr "gặp lỗi phân cấp vùng nhớ trong“action_luksFormat”" #~ msgid "Key %d not active. Can't wipe.\n" #~ msgstr "Khóa %d không hoạt động thì không xóa được.\n" #~ msgid " " #~ msgstr " " #~ msgid "create active device" #~ msgstr "tạo thiết bị hoạt động" #~ msgid "remove (deactivate) device" #~ msgstr "gỡ bỏ (dừng hoạt động) thiết bị" #~ msgid "Activated keyslot %i.\n" #~ msgstr "Khe-khóa (keyslot) đã được kích hoạt %i.\n" #~ msgid "Progress: %5.1f%%, ETA %02llu:%02llu, %4llu MiB written, speed %5.1f MiB/s%s" #~ msgstr "Diễn biến: %5.1f%%, ETA %02llu:%02llu, đã ghi %4llu MiB, tốc độ %5.1f MiB/s%s" #~ msgid "Interrupted by a signal.\n" #~ msgstr "Bị ngắt bởi tín hiệu signal.\n" #~ msgid "Cannot find a free loopback device.\n" #~ msgstr "Không tìm thấy thiết bị vòng ngược (loopback) nào còn rảnh.\n" #~ msgid "Cannot open device %s\n" #~ msgstr "Không thể mở thiết bị %s\n" #~ msgid "Cannot use passed UUID unless decryption in progress.\n" #~ msgstr "Không thể dùng UUID chuyển qua trừ khi việc giải mã đang được thực hiện.\n" #~ msgid "Marking LUKS device %s usable.\n" #~ msgstr "Đánh dấu thiết bị LUKS %s là có thể dùng.\n" #~ msgid "WARNING: this is experimental code, it can completely break your data.\n" #~ msgstr "CẢNH BÁO: đây chỉ là mã thử nghiệm, nó có thể phá hoại dữ liệu của bạn.\n" #~ msgid "FIPS checksum verification failed.\n" #~ msgstr "Thẩm tra mã băm FIPS không đạt.\n" #~ msgid "WARNING: device %s is a partition, for TCRYPT system encryption you usually need to use whole block device path.\n" #~ msgstr "CẢNH BÁO: thiết-bị %s là một phân vùng, với mã hóa hệ thống TCRYPT bạn thường cần phải sử dụng toàn bộ đường dẫn thiết-bị khối.\n" #~ msgid "Kernel doesn't support plain64 IV.\n" #~ msgstr "Nhân không hỗ trợ plain64 IV.\n" #~ msgid "Enter LUKS passphrase: " #~ msgstr "Gõ cụm từ mật khẩu LUKS: " #~ msgid "Enter new LUKS passphrase: " #~ msgstr "Gõ cụm từ mật khẩu LUKS: " #~ msgid "Enter any LUKS passphrase: " #~ msgstr "Nhập mật khẩu LUKS vào: " #~ msgid "Backup file %s doesn't exist.\n" #~ msgstr "Tập tin sao lưu %s không tồn tại.\n" #~ msgid " " #~ msgstr " " #~ msgid "create device" #~ msgstr "tạo thiết bị" #~ msgid "remove device" #~ msgstr "gỡ bỏ thiết bị" #~ msgid "remove LUKS mapping" #~ msgstr "gỡ bỏ sự ánh xạ LUKS" #~ msgid "open loop-AES device as mapping " #~ msgstr "mở thiết bị loop-AES như là ánh xạ " #~ msgid "remove loop-AES mapping" #~ msgstr "gỡ bỏ ánh xạ loop-AES" #~ msgid "Option --allow-discards is allowed only for luksOpen, loopaesOpen and create operation.\n" #~ msgstr "Tùy chọn “--allow-discards” thì chỉ cho phép với thao tác “luksOpen”, “loopaesOpen” và tạo (create).\n" #~ msgid "Cannot open device %s for %s%s access.\n" #~ msgstr "Không thể mở thiết bị %s cho truy cập %s%s.\n" #~ msgid "exclusive " #~ msgstr "dành riêng " #~ msgid "writable" #~ msgstr "ghi được" #~ msgid "read-only" #~ msgstr "chỉ đọc" #~ msgid "WARNING!!! Possibly insecure memory. Are you root?\n" #~ msgstr "CẢNH BÁO!!! Có thể là vùng nhớ không an toàn. Bạn có đang chạy dưới quyền siêu người dùng (root) không?\n" #~ msgid "Unable to obtain sector size for %s" #~ msgstr "Không thể lấy kích cỡ cung từ cho %s" #~ msgid "Cannot use device %s (crypt segments overlaps or in use by another device).\n" #~ msgstr "Không thể sử dụng thiết bị %s (các đoạn crypt chồng lên nhau hay đang sử dụng bởi thiết bị khác).\n" #~ msgid "Cannot find compatible device-mapper kernel modules.\n" #~ msgstr "Không tìm thấy mô-đun hạt nhân ánh xạ thiết bị tương thích.\n" #~ msgid "Warning: exhausting read requested, but key file %s is not a regular file, function might never return.\n" #~ msgstr "Cảnh báo: yêu cầu một hàm đọc vét kiệt mà tập tin khóa %s không phải là một tập tin thông thường thì có thể là hàm chưa bao giờ trả lại.\n" #~ msgid "Cannot open device: %s\n" #~ msgstr "Không thể mở thiết bị: %s\n" #~ msgid "BLKROGET failed on device %s.\n" #~ msgstr "BLKROGET bị lỗi trên thiết bị %s.\n" #~ msgid "BLKGETSIZE failed on device %s.\n" #~ msgstr "BLKGETSIZE bị lỗi trên thiết bị %s.\n" #~ msgid "identical to luksKillSlot - DEPRECATED - see man page" #~ msgstr "trùng với luksKillSlot - BỊ PHẢN ĐỐI - xem trang hướng dẫn" #~ msgid "modify active device - DEPRECATED - see man page" #~ msgstr "sửa đổi thiết bị hoạt động - BỊ PHẢN ĐỐI - xem trang hướng dẫn" #~ msgid "" #~ "The reload action is deprecated. Please use`dmsetup reload' in case you really need this functionality.\n" #~ "WARNING: do not use reload to touch LUKS devices. If that is the case, hit Ctrl-C now.\n" #~ msgstr "" #~ "Thao tác nạp lại bị phản đối. Hãy sử dụng“dmsetup reload” trong trường hợp bạn thực sự yêu cầu chức năng này.\n" #~ "CẢNH BÁO: đừng sử dụng chức năng nạp lại để thao tác thiết bị kiểu LUKS. Trong trường hợp đó, bấm tổ hợp phím Ctrl-C ngay bây giờ.\n" #~ msgid "Obsolete option --non-exclusive is ignored.\n" #~ msgstr "Tùy chọn cũ“--non-exclusive” bị bỏ qua.\n" #~ msgid "Read the key from a file (can be /dev/random)" #~ msgstr "Đọc khóa từ một tập tin nào đó (có thể là“/dev/random”)" #~ msgid "(Obsoleted, see man page.)" #~ msgstr "(Bị phản đối, xem trang hướng dẫn.)"