# Chinese translations for fetchmail package # fetchmail 软件包的简体中文翻译. # Copyright (C) 2008 Eric S. Raymond (msgids) # This file is distributed under the same license as the fetchmail package. # Ji ZhengYu , 2008, 2009, 2010, 2011, 2012, 2013 # Boyuan Yang <073plan@gmail.com>, 2020. # msgid "" msgstr "" "Project-Id-Version: fetchmail 6.4.13-rc1\n" "Report-Msgid-Bugs-To: fetchmail-devel@lists.sourceforge.net\n" "POT-Creation-Date: 2024-11-05 23:01+0100\n" "PO-Revision-Date: 2020-10-15 09:14-0400\n" "Last-Translator: Boyuan Yang <073plan@gmail.com>\n" "Language-Team: Chinese (simplified) \n" "Language: zh_CN\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Bugs: Report translation errors to the Language-Team address.\n" "Plural-Forms: nplurals=1; plural=0;\n" "X-Generator: Poedit 2.4.1\n" #: checkalias.c:176 #, c-format msgid "Checking if %s is really the same node as %s\n" msgstr "正在检查 %s 是否与节点 %s 一致\n" #: checkalias.c:180 msgid "Yes, their IP addresses match\n" msgstr "正确，它们的 IP 地址相同\n" #: checkalias.c:184 msgid "No, their IP addresses don't match\n" msgstr "错误，它们的 IP 地址不同\n" #: checkalias.c:209 #, c-format msgid "nameserver failure while looking for '%s' during poll of %s: %s\n" msgstr "收取 %2$s 中邮件并查找 ‘%1$s’ 时 nameserver 出错: %3$s\n" #: checkalias.c:232 #, c-format msgid "nameserver failure while looking for `%s' during poll of %s.\n" msgstr "收取 %2$s 中邮件并查找 ‘%1$s’ 时 nameserver 出错。\n" #: cram.c:94 ntlmsubr.c:65 msgid "could not decode BASE64 challenge\n" msgstr "无法解析 BASE64 编码请求\n" #: cram.c:102 #, c-format msgid "decoded as %s\n" msgstr "以 %s 解码\n" #: driver.c:183 #, c-format msgid "kerberos error %s\n" msgstr "kerberos 认证系统出错 %s\n" #: driver.c:243 driver.c:249 #, c-format msgid "krb5_sendauth: %s [server says '%s']\n" msgstr "krb5_sendauth: %s [ 服务器响应 \"%s\"]\n" #: driver.c:329 msgid "Fetchmail oversized-messages warning" msgstr "Fetchmail 超大邮件警告" #: driver.c:333 #, c-format msgid "The following oversized messages were deleted on server %s account %s:" msgstr "以下超大邮件从服务器 %s 上删除，帐号为 %s:" #: driver.c:337 #, c-format msgid "The following oversized messages remain on server %s account %s:" msgstr "以下超大邮件留在了服务器 %s 上，帐号为 %s:" #: driver.c:356 #, c-format msgid " %d message %d octets long deleted by fetchmail." msgid_plural " %d messages %d octets long deleted by fetchmail." msgstr[0] "fetchmail 删除 %d 封邮件， %d 字节。" #: driver.c:361 #, c-format msgid " %d message %d octets long skipped by fetchmail." msgid_plural " %d messages %d octets long skipped by fetchmail." msgstr[0] "fetchmail 跳过 %d 封邮件，%d octets。" #: driver.c:506 #, c-format msgid "skipping message %s@%s:%d" msgstr "忽略 %s@%s:%d 封邮件" #: driver.c:561 #, c-format msgid "skipping message %s@%s:%d (%d octets)" msgstr "跳过 %s@%s:%d 封邮件(%d 字节)" #: driver.c:577 msgid " (length -1)" msgstr " (长度 -1)" #: driver.c:580 msgid " (oversized)" msgstr "(超大)" #: driver.c:598 #, c-format msgid "couldn't fetch headers, message %s@%s:%d (%d octets)\n" msgstr "无法获取邮件头，邮件 %s@%s:%d (%d 字节)\n" #: driver.c:616 #, c-format msgid "reading message %s@%s:%d of %d" msgstr "读取 %1$s@%2$s:%4$d 封中的 %3$d 封邮件" #: driver.c:621 #, c-format msgid " (%d octets)" msgstr " (%d 字节)" #: driver.c:622 #, c-format msgid " (%d header octets)" msgstr "(邮件头 %d 字节)" #: driver.c:692 #, c-format msgid " (%d body octets)" msgstr "(邮件内容 %d 字节)" #: driver.c:754 #, c-format msgid "message %s@%s:%d was not the expected length (%d actual != %d expected)\n" msgstr "%s@%s:%d 邮件非所需大小 (实际 %d 字节!= 所要求的 %d 字节)\n" #: driver.c:786 msgid " retained\n" msgstr "已保留\n" #: driver.c:796 msgid " flushed\n" msgstr "已删除\n" #: driver.c:808 msgid " not flushed\n" msgstr "未删除\n" #: driver.c:826 #, c-format msgid "fetchlimit %d reached; %d message left on server %s account %s\n" msgid_plural "fetchlimit %d reached; %d messages left on server %s account %s\n" msgstr[0] "到达收件上限 %d；%d 封邮件留在服务器 %s 帐号为 %s\n" #: driver.c:887 #, c-format msgid "timeout after %d seconds waiting to connect to server %s.\n" msgstr "等待连接服务器 %2$s %1$d 秒后超时。\n" #: driver.c:891 #, c-format msgid "timeout after %d seconds waiting for server %s.\n" msgstr "等待服务器 %2$s %1$d 秒后超时。\n" #: driver.c:895 #, c-format msgid "timeout after %d seconds waiting for %s.\n" msgstr "等待 %2$s %1$d 秒后超时。\n" #: driver.c:900 #, c-format msgid "timeout after %d seconds waiting for listener to respond.\n" msgstr "等待接收端 %d 秒无响应超时。\n" #: driver.c:903 #, c-format msgid "timeout after %d seconds.\n" msgstr "等待 %d 秒后超时。\n" #: driver.c:915 msgid "fetchmail sees repeated timeouts" msgstr "fetchmail 发现反复超时" #: driver.c:918 #, c-format msgid "Fetchmail saw more than %d timeouts while attempting to get mail from %s@%s.\n" msgstr "Fetchmail 尝试从 %2$s@%3$s 收取邮件时发现多于 %1$d 次超时。\n" #: driver.c:922 msgid "" "This could mean that your mailserver is stuck, or that your SMTP\n" "server is wedged, or that your mailbox file on the server has been\n" "corrupted by a server error. You can run `fetchmail -v -v' to\n" "diagnose the problem.\n" "\n" "Fetchmail won't poll this mailbox again until you restart it.\n" msgstr "" "这可能意味着您的邮件服务器正忙，或者您的 SMTP 服务器拥挤，\n" "或者您位于服务器上的邮箱已经被服务器中的错误破坏了。您可以\n" "运行 ‘fetchmail -v -v’ 来分析这个问题\n" "\n" "Fetchmail 不会再查寻此邮箱中的邮件，除非您重启\n" #: driver.c:948 #, c-format msgid "pre-connection command terminated with signal %d\n" msgstr "预连接命令终止，返回信号 %d\n" #: driver.c:951 #, c-format msgid "pre-connection command failed with status %d\n" msgstr "预连接命令失败，状态码 %d\n" #: driver.c:981 #, c-format msgid "couldn't find HESIOD pobox for %s\n" msgstr "HESIOD pobox 中找不到 %s\n" #: driver.c:1002 msgid "Lead server has no name.\n" msgstr "主服务器无名字。\n" #: driver.c:1029 #, c-format msgid "couldn't find canonical DNS name of %s (%s): %s\n" msgstr "无法找到规范的 %s (%s) 的 DNS 名称： %s\n" #: driver.c:1076 #, c-format msgid "%s connection to %s failed" msgstr "%s 连接至 %s 时失败" #: driver.c:1105 msgid "SSL connection failed.\n" msgstr "SSL 连接失败。\n" #: driver.c:1159 #, c-format msgid "Lock-busy error on %s@%s\n" msgstr "%s@%s 出现死锁错误\n" #: driver.c:1163 #, c-format msgid "Server busy error on %s@%s\n" msgstr "%s@%s 出现服务器繁忙错误\n" #: driver.c:1168 #, c-format msgid "Authorization failure on %s@%s%s\n" msgstr "%s@%s%s 出现授权失败错误\n" #: driver.c:1171 msgid " (previously authorized)" msgstr "（先前已授权）" #: driver.c:1174 msgid "For help, see http://www.fetchmail.info/fetchmail-FAQ.html#R15\n" msgstr "寻求帮助请访问 http://www.fetchmail.info/fetchmail-FAQ.html#R15\n" #: driver.c:1195 #, c-format msgid "fetchmail authentication failed on %s@%s" msgstr "fetchmail 在 %s@%s 上验证失败" #: driver.c:1199 #, c-format msgid "Fetchmail could not get mail from %s@%s.\n" msgstr "Fetchmail 无法从 %s@%s 中获取邮件。\n" #: driver.c:1203 msgid "" "The attempt to get authorization failed.\n" "Since we have already succeeded in getting authorization for this\n" "connection, this is probably another failure mode (such as busy server)\n" "that fetchmail cannot distinguish because the server didn't send a useful\n" "error message." msgstr "" "尝试获取授权时失败。\n" "由于我们已经成功获得本次连接的授权，但因为服务器无法给出有用的错误\n" "提示信息，因此这可能是另一种错误情况(比如服务器忙)，从而导致\n" " fetchmail 无法区分这些错误。" #: driver.c:1209 msgid "" "\n" "However, if you HAVE changed your account details since starting the\n" "fetchmail daemon, you need to stop the daemon, change your configuration\n" "of fetchmail, and then restart the daemon.\n" "\n" "The fetchmail daemon will continue running and attempt to connect\n" "at each cycle. No future notifications will be sent until service\n" "is restored." msgstr "" "\n" "但是，如果您在开启 fetchmail 后台服务后确实改过帐户信息，那您必须\n" "先停止后台服务，然后修改您的 fetchmail 配置，最后再重启服务。\n" "\n" "fetchmail 后台服务会继续运行并在每次被唤醒时尝试进行连接。除非\n" "服务重置，否则它不会再发送任何提示信息了。" #: driver.c:1219 msgid "" "The attempt to get authorization failed.\n" "This probably means your password is invalid, but some servers have\n" "other failure modes that fetchmail cannot distinguish from this\n" "because they don't send useful error messages on login failure.\n" "\n" "The fetchmail daemon will continue running and attempt to connect\n" "at each cycle. No future notifications will be sent until service\n" "is restored." msgstr "" "尝试获取授权时失败。\n" "这通常表明您的密码无效。但由于某些服务器在登录失败时不给出有用的\n" "错误信息，因此这就导致了 fetchmail 无法与其它的错误情况进行区分。\n" "\n" "fetchmail 后台服务会继续运行并在每次被唤醒时尝试进行连接。除非服务\n" "重置，否则它不会再发送任何提示信息了。" #: driver.c:1235 #, c-format msgid "Repoll immediately on %s@%s\n" msgstr "立即从 %s@%s 中重新收件\n" #: driver.c:1241 #, fuzzy, c-format #| msgid "Server busy error on %s@%s\n" msgid "Socket or TLS error on %s@%s\n" msgstr "%s@%s 出现服务器繁忙错误\n" #: driver.c:1247 #, c-format msgid "Unknown login or authentication error on %s@%s\n" msgstr "%s@%s 有未知的登录或验证错误\n" #: driver.c:1272 #, c-format msgid "Authorization OK on %s@%s\n" msgstr "验证正确 %s@%s\n" #: driver.c:1278 #, c-format msgid "fetchmail authentication OK on %s@%s" msgstr "fetchmail 在 %s@%s 上验证正确" #: driver.c:1282 #, c-format msgid "Fetchmail was able to log into %s@%s.\n" msgstr "Fetchmail 可登录 %s@%s。\n" #: driver.c:1286 msgid "Service has been restored.\n" msgstr "服务已经被重置。\n" #: driver.c:1319 #, c-format msgid "selecting or re-polling folder %s\n" msgstr "正在选择或重新检索邮箱 %s\n" #: driver.c:1321 msgid "selecting or re-polling default folder\n" msgstr "正在选择或重检默认邮箱\n" #: driver.c:1334 #, c-format msgid "%s at %s (folder %s)" msgstr "%s 在 %s (邮箱 %s)" #: driver.c:1337 rcfile_y.y:49 #, c-format msgid "%s at %s" msgstr "%s 在 %s" #: driver.c:1342 #, c-format msgid "Polling %s\n" msgstr "正在检取 %s\n" #: driver.c:1346 #, c-format msgid "%d message (%d %s) for %s" msgid_plural "%d messages (%d %s) for %s" msgstr[0] "%4$s 有 %1$d 封邮件 (%2$d %3$s)" #: driver.c:1349 msgid "seen" msgid_plural "seen" msgstr[0] "已读" #: driver.c:1352 #, c-format msgid "%d message for %s" msgid_plural "%d messages for %s" msgstr[0] "%2$s 有 %1$d 封邮件" #: driver.c:1359 #, fuzzy, c-format #| msgid " (%d octets).\n" msgid " (%llu octets).\n" msgstr "(%d 字节)。\n" #: driver.c:1365 #, c-format msgid "No mail for %s\n" msgstr "%s 无邮件\n" #: driver.c:1398 msgid "bogus message count!" msgstr "发现无效邮件！" #: driver.c:1450 #, c-format msgid "Too many mails skipped (%d > %d) due to transient errors for %s\n" msgstr "跳过了太多的邮件( %d > %d)，%s 传送错误\n" #: driver.c:1556 msgid "socket" msgstr "套接口" #: driver.c:1559 msgid "missing or bad RFC822 header" msgstr "未找到或错误的 RFC822 协议头" #: driver.c:1565 msgid "client/server synchronization" msgstr "客户端/服务器同步" #: driver.c:1568 msgid "client/server protocol" msgstr "客户端/服务器协议" #: driver.c:1571 msgid "lock busy on server" msgstr "服务器死锁" #: driver.c:1574 msgid "SMTP transaction" msgstr "处理 SMTP" #: driver.c:1577 msgid "DNS lookup" msgstr "查询 DNS" #: driver.c:1580 msgid "undefined" msgstr "未定义" #: driver.c:1586 #, fuzzy, c-format #| msgid "%s error while fetching from %s@%s and delivering to SMTP host %s\n" msgid "%s error while fetching from %s@%s and delivering to %s host %s\n" msgstr "从 %2$s@%3$s 收邮件并投递至 SMTP 主机 %4$s 时出现错误 %1$s\n" #: driver.c:1589 msgid "unknown" msgstr "未知" #: driver.c:1591 #, c-format msgid "%s error while fetching from %s@%s\n" msgstr "从 %2$s@%3$s 收件时产生错误 %1$s\n" #: driver.c:1603 #, c-format msgid "post-connection command terminated with signal %d\n" msgstr "执行后续程序失败，返回信号 %d\n" #: driver.c:1605 #, c-format msgid "post-connection command failed with status %d\n" msgstr "执行后续程序失败，状态码 %d\n" #: driver.c:1624 msgid "Kerberos V4 support not linked.\n" msgstr "未连接 Kerberos V4 支持\n" #: driver.c:1632 msgid "Kerberos V5 support not linked.\n" msgstr "未连接 Kerberos V5 支持\n" #: driver.c:1643 #, c-format msgid "Option --flush is not supported with %s\n" msgstr "%s 不支持 --flush 选项\n" #: driver.c:1649 #, c-format msgid "Option --all is not supported with %s\n" msgstr "%s 不支持 --all 选项\n" #: driver.c:1658 #, c-format msgid "Option --limit is not supported with %s\n" msgstr "%s 不支持 --limit 选项\n" #: env.c:52 #, c-format msgid "" "%s: The QMAILINJECT environment variable is set.\n" "This is dangerous as it can make qmail-inject or qmail's sendmail wrapper\n" "tamper with your From: or Message-ID: headers.\n" "Try \"env QMAILINJECT= %s YOUR ARGUMENTS HERE\"\n" "%s: Abort.\n" msgstr "" "%s: 设置了 QMAILINJECT 环境变量。\n" "这很危险，由于它会引起 qmail-inject 或是 qmail 调用 sendmail，\n" "由此窜改您邮件头中的 From: 或是 Message-ID 字段。\n" "尝试用 “env QMAILINJECT= %s 您的参数”\n" "%s: 退出\n" #: env.c:64 #, c-format msgid "" "%s: The NULLMAILER_FLAGS environment variable is set.\n" "This is dangerous as it can make nullmailer-inject or nullmailer's\n" "sendmail wrapper tamper with your From:, Message-ID: or Return-Path: headers.\n" "Try \"env NULLMAILER_FLAGS= %s YOUR ARGUMENTS HERE\"\n" "%s: Abort.\n" msgstr "" "%s: 设置了 NULLMAILER_FLAGS 环境变量。\n" "这很危险，由于它会引起 nullmailer-inject 或是 nullmailer 调用\n" "sendmail，由此窜改您邮件头中的 From: ，Message-ID 或是\n" "Return-Path:字段。尝试用 “env NULLMAILER_FLAGS= %s 您的参数”\n" "%s: 退出\n" #: env.c:76 #, c-format msgid "%s: You don't exist. Go away.\n" msgstr "%s: 不存在您的用户名，退出\n" #: env.c:137 msgid "Cannot find absolute path for user's home directory.\n" msgstr "无法找到用户家目录的绝对路径。\n" #: env.c:161 msgid "Cannot find absolute path for fetchmail's home directory.\n" msgstr "无法找到 fetchmail 的家目录的绝对路径。\n" #: env.c:194 #, c-format msgid "%s: can't determine your host!" msgstr "%s: 无法确认您的主机!" #: env.c:217 #, fuzzy, c-format #| msgid "getaddrinfo failed for %s\n" msgid "getaddrinfo failed for \"%s\": %s\n" msgstr "%s 主机上 getaddrinfo 出错\n" #: env.c:218 msgid "Cannot find my own host in hosts database to qualify it!\n" msgstr "无法在主机数据库中找到自己的主机来验证它！\n" #: env.c:222 msgid "" "Trying to continue with unqualified hostname.\n" "DO NOT report broken Received: headers, HELO/EHLO lines or similar problems!\n" "DO repair your /etc/hosts, DNS, NIS or LDAP instead.\n" msgstr "" "正在尝试用未验证的主机名继续操作。\n" "不要报告类似于 Received:，HELO/EHLO 邮件头损坏等问题！\n" "确保您已修正了 /etc/hosts，DNS，NIS 或者 LDAP。\n" #: etrn.c:46 odmr.c:52 #, c-format msgid "%s's SMTP listener does not support ESMTP\n" msgstr "%s 的 SMTP 端不支持 ESMTP\n" #: etrn.c:52 #, c-format msgid "%s's SMTP listener does not support ETRN\n" msgstr "%s 的 SMTP 端不支持 ETRN\n" #: etrn.c:76 #, c-format msgid "Queuing for %s started\n" msgstr "开始对 %s 进行排队处理\n" #: etrn.c:81 #, c-format msgid "No messages waiting for %s\n" msgstr "不存在等待 %s 的邮件\n" #: etrn.c:87 #, c-format msgid "Pending messages for %s started\n" msgstr "对 %s 进行挂起邮件处理\n" #: etrn.c:91 #, c-format msgid "Unable to queue messages for node %s\n" msgstr "无法对 %s 节点进行邮件排队\n" #: etrn.c:95 #, c-format msgid "Node %s not allowed: %s\n" msgstr "不允许节点 %s: %s\n" #: etrn.c:99 msgid "ETRN syntax error\n" msgstr "ETRN 语法错误\n" #: etrn.c:103 msgid "ETRN syntax error in parameters\n" msgstr "ETRN 的参数中有语法错误\n" #: etrn.c:107 #, c-format msgid "Unknown ETRN error %d\n" msgstr "未知的 ETRN 错误 %d\n" #: etrn.c:153 msgid "Option --keep is not supported with ETRN\n" msgstr "ETRN 不支持 --keep 选项\n" #: etrn.c:157 msgid "Option --flush is not supported with ETRN\n" msgstr "ETRN 不支持 --flush 选项\n" #: etrn.c:161 msgid "Option --folder is not supported with ETRN\n" msgstr "ETRN 不支持 --folder 选项\n" #: etrn.c:165 msgid "Option --check is not supported with ETRN\n" msgstr "ETRN 不支持 --check 选项\n" #: fetchmail.c:136 #, c-format msgid "" "Copyright (C) 2002, 2003 Eric S. Raymond\n" "Copyright (C) 2004 Matthias Andree, Eric S. Raymond,\n" " Robert M. Funk, Graham Wilson\n" "Copyright (C) 2005 - 2012 Sunil Shetye\n" "Copyright (C) 2005 - %d Matthias Andree\n" msgstr "" "Copyright (C) 2002, 2003 Eric S. Raymond\n" "Copyright (C) 2004 Matthias Andree, Eric S. Raymond,\n" " Robert M. Funk, Graham Wilson\n" "Copyright (C) 2005 - 2012 Sunil Shetye\n" "Copyright (C) 2005 - %d Matthias Andree\n" #: fetchmail.c:142 msgid "" "Fetchmail comes with ABSOLUTELY NO WARRANTY. This is free software, and you\n" "are welcome to redistribute it under certain conditions. For details,\n" "please see the file COPYING in the source or documentation directory.\n" msgstr "" "Fetchmail 绝对不含任何保证。这是自由软件，而您被鼓励在一定条件下\n" "重新分发它。\n" "详情请看源文件或是文档目录中的 COPYING 部分。\n" #: fetchmail.c:188 #, fuzzy, c-format #| msgid "Query status=%d\n" msgid "Query status=%d (%s)\n" msgstr "查询状态=%d\n" #: fetchmail.c:190 #, c-format msgid "Query status=%d\n" msgstr "查询状态=%d\n" #: fetchmail.c:225 msgid "WARNING: Running as root is discouraged.\n" msgstr "警告: 不提倡以 root 身份运行\n" #: fetchmail.c:237 msgid "fetchmail: invoked with" msgstr "fetchmail: 调用参数" #: fetchmail.c:260 msgid "could not get current working directory\n" msgstr "无法得到当前工作目录\n" #: fetchmail.c:339 #, c-format msgid "This is fetchmail release %s" msgstr "这是 fetchmail 发行版 %s" #: fetchmail.c:342 #, c-format msgid "" "Compiled with SSL library %#lx \"%s\"\n" "Run-time uses SSL library %#lx \"%s\"\n" msgstr "" #: fetchmail.c:346 #, fuzzy, c-format #| msgid "OpenSSL reported: %s\n" msgid "" "OpenSSL: %s\n" "Engines: %s\n" msgstr "OpenSSL 报告了：%s\n" #: fetchmail.c:355 msgid "ERROR: Compiled against LibreSSL, which is a copyright violation for lack of GPL clause 2b exception. See COPYING. Aborting.\n" msgstr "" #: fetchmail.c:359 msgid "WARNING: Compiled without SSL/TLS.\n" msgstr "警告：编译时未启用 SSL/TLS。\n" #: fetchmail.c:378 msgid "The nodetach option is in effect, ignoring logfile option.\n" msgstr "nodetach 选项在起作用，忽略 logfile 选项。\n" #: fetchmail.c:385 msgid "Not running in daemon mode, ignoring logfile option.\n" msgstr "未以 daemon 模式运行，忽略 logfile 选项。\n" #: fetchmail.c:392 #, c-format msgid "Logfile \"%s\" does not exist, ignoring logfile option.\n" msgstr "日志文件 \"%s\" 不存在，忽略 logfile 选项。\n" #: fetchmail.c:398 #, c-format msgid "Logfile \"%s\" is not writable, aborting.\n" msgstr "日志文件 \"%s\" 不可写，退出。\n" #: fetchmail.c:410 #, c-format msgid "syslog and logfile options are both set, ignoring syslog, and logging to %s" msgstr "同时指定了 syslog 和 logfile 选项，忽略 syslog 并登录至 %s" #: fetchmail.c:499 #, fuzzy #| msgid "fetchmail: %s configuration invalid, specify positive port number for service or port\n" msgid "fetchmail: configuration invalid, --moveto is only valid for IMAP servers\n" msgstr "fetchmail: %s 配置无效，为服务或端口指定大于零的端口\n" #: fetchmail.c:512 #, c-format msgid "Taking options from command line%s%s\n" msgstr "正从命令行获得选项 %s%s\n" #: fetchmail.c:513 msgid " and " msgstr "和" #: fetchmail.c:518 #, c-format msgid "No mailservers set up -- perhaps %s is missing?\n" msgstr "未设置邮件服务器 -- 可能未找到 %s？\n" #: fetchmail.c:539 msgid "fetchmail: no mailservers have been specified.\n" msgstr "fetchmail: 未指定邮件服务器\n" #: fetchmail.c:551 msgid "fetchmail: no other fetchmail is running\n" msgstr "fetchmail: 无其它 fetchmail 正在运行\n" #: fetchmail.c:557 #, c-format msgid "fetchmail: error killing %s fetchmail at %ld; bailing out.\n" msgstr "fetchmail: 终止 %s fetchmail 进程号 %ld 时出错；退出。\n" #: fetchmail.c:558 fetchmail.c:567 msgid "background" msgstr "后台" #: fetchmail.c:558 fetchmail.c:567 msgid "foreground" msgstr "前台" #: fetchmail.c:566 #, c-format msgid "fetchmail: %s fetchmail at %ld killed.\n" msgstr "fetchmail: %s fetchmail 进程号 %ld 终止。\n" #: fetchmail.c:594 msgid "fetchmail: can't check mail while another fetchmail to same host is running.\n" msgstr "fetchmail: 有另一个 fetchmail 在同一主机上运行时无法检查邮件。\n" #: fetchmail.c:600 #, c-format msgid "fetchmail: can't poll specified hosts with another fetchmail running at %ld.\n" msgstr "fetchmail: 有另一个 fetchmail 进程号 %ld 在指定主机上运行时无法收邮件。\n" #: fetchmail.c:607 #, c-format msgid "fetchmail: another foreground fetchmail is running at %ld.\n" msgstr "fetchmail: 另一个前台 fetchmail 进程号 %ld 正在运行。\n" #: fetchmail.c:614 msgid "fetchmail: can't accept options while a background fetchmail is running.\n" msgstr "fetchmail: 有后台 fetchmail 正在运行时无法接受选项\n" #: fetchmail.c:627 #, c-format msgid "fetchmail: background fetchmail at %ld awakened.\n" msgstr "fetchmail: 后台 fetchmail 进程号 %ld 被唤醒\n" #: fetchmail.c:639 #, c-format msgid "fetchmail: elder sibling at %ld died mysteriously.\n" msgstr "fetchmail: 上次 fetchmail 进程号 %ld 不明原因的终止\n" #: fetchmail.c:655 #, c-format msgid "fetchmail: can't find a password for %s@%s.\n" msgstr "fetchmail: 无法找到 %s@%s 的密码\n" #: fetchmail.c:660 #, c-format msgid "Enter password for %s@%s: " msgstr "输入 %s@%s 的密码：" #: fetchmail.c:702 msgid "fetchmail: Cannot detach into background. Aborting.\n" msgstr "fetchmail: 无法转入后台。退出\n" #: fetchmail.c:706 #, c-format msgid "starting fetchmail %s daemon\n" msgstr "开启 fetchmail %s 后台服务\n" #: fetchmail.c:722 fetchmail.c:724 #, c-format msgid "could not open %s to append logs to\n" msgstr "无法打开 %s 添加记录\n" #: fetchmail.c:743 msgid "--check mode enabled, not fetching mail\n" msgstr "开启 --check 模式, 而非真正取回邮件\n" #: fetchmail.c:768 fetchmail.c:773 #, c-format msgid "couldn't time-check %s (error %d)\n" msgstr "无法时限检测 %s (错误号 %d)\n" #: fetchmail.c:778 #, c-format msgid "restarting fetchmail (%s changed)\n" msgstr "正在重启 fetchmail (%s 改变了)\n" #: fetchmail.c:782 msgid "attempt to re-exec may fail as directory has not been restored\n" msgstr "由于目录尚未重置，因此重新执行的尝试可能失败\n" #: fetchmail.c:809 msgid "attempt to re-exec fetchmail failed\n" msgstr "重新执行 fetchmail 的尝试失败了\n" #: fetchmail.c:839 #, c-format msgid "poll of %s skipped (failed authentication or too many timeouts)\n" msgstr "忽略收取 %s 的邮件 (验证失败或多次超时)\n" #: fetchmail.c:851 #, c-format msgid "interval not reached, not querying %s\n" msgstr "时间间隔未到，不查寻 %s \n" #: fetchmail.c:926 msgid "All connections are wedged. Exiting.\n" msgstr "所有连接堵塞。退出\n" #: fetchmail.c:934 #, c-format msgid "sleeping at %s for %d seconds\n" msgstr "在 %s 休眠 %d 秒\n" #: fetchmail.c:957 fetchmail.c:959 #, c-format msgid "awakened by %s\n" msgstr "通过信号 %s 唤醒\n" #: fetchmail.c:961 #, c-format msgid "awakened by signal %d\n" msgstr "通过信号 %d 唤醒\n" #: fetchmail.c:969 #, c-format msgid "awakened at %s\n" msgstr "在 %s 被唤醒\n" #: fetchmail.c:974 #, c-format msgid "normal termination, status %d\n" msgstr "正常结束，返回值 %d\n" #: fetchmail.c:1144 msgid "couldn't time-check the run-control file\n" msgstr "无法对 run-control 文件进行时限检测\n" #: fetchmail.c:1179 #, c-format msgid "Warning: multiple mentions of host %s in config file\n" msgstr "警告: 在配置文件中多次提及主机 %s\n" #: fetchmail.c:1218 msgid "fetchmail: Error: multiple \"defaults\" records in config file, or \"defaults\" is not the first record.\n" msgstr "fetchmail: 错误: 在配置文件中有多个 “defaults” 记录，或者“defaults”不是第一个记录。\n" #: fetchmail.c:1349 msgid "SSL support is not compiled in.\n" msgstr "SSL 支持未编译在内。\n" #: fetchmail.c:1356 msgid "KERBEROS v4 support is configured, but not compiled in.\n" msgstr "配置了 KERBEROS v4 支持，但该功能未编译在内。\n" #: fetchmail.c:1362 msgid "KERBEROS v5 support is configured, but not compiled in.\n" msgstr "配置了 KERBEROS v5 支持，但该功能未编译在内。\n" #: fetchmail.c:1368 msgid "GSSAPI support is configured, but not compiled in.\n" msgstr "配置了 GSSAPI 支持，但该功能未编译在内。\n" #: fetchmail.c:1398 #, c-format msgid "fetchmail: warning: no DNS available to check multidrop fetches from %s\n" msgstr "fetchmail: 警告: 无可用的 DNS 来检查取自 %s 的多投邮件\n" #: fetchmail.c:1409 #, c-format msgid "warning: multidrop for %s requires envelope option!\n" msgstr "警告: %s 设置了多投邮件，需设置 envelope 选项！\n" #: fetchmail.c:1410 msgid "warning: Do not ask for support if all mail goes to postmaster!\n" msgstr "警告: 如果所有邮件均被邮件管理员收取，不要寻求支持！\n" #: fetchmail.c:1427 #, c-format msgid "fetchmail: %s configuration invalid, specify positive port number for service or port\n" msgstr "fetchmail: %s 配置无效，为服务或端口指定大于零的端口\n" #: fetchmail.c:1434 #, c-format msgid "fetchmail: %s configuration invalid, RPOP requires a privileged port\n" msgstr "fetchmail: %s 配置无效，RPOP 要求开放一个特许端口\n" #: fetchmail.c:1441 #, fuzzy, c-format #| msgid "fetchmail: %s configuration invalid, specify positive port number for service or port\n" msgid "WARNING: %s configuration invalid, you normally need --ssl for port 995/service pop3s.\n" msgstr "fetchmail: %s 配置无效，为服务或端口指定大于零的端口\n" #: fetchmail.c:1442 #, fuzzy, c-format #| msgid "fetchmail: %s configuration invalid, specify positive port number for service or port\n" msgid "WARNING: %s configuration invalid, you normally need port 995/service pop3s for --ssl.\n" msgstr "fetchmail: %s 配置无效，为服务或端口指定大于零的端口\n" #: fetchmail.c:1445 #, c-format msgid "WARNING: %s configuration invalid, you normally need --ssl for port 993/service imaps.\n" msgstr "" #: fetchmail.c:1446 #, fuzzy, c-format #| msgid "fetchmail: %s configuration invalid, specify positive port number for service or port\n" msgid "WARNING: %s configuration invalid, you normally need port 993/service imaps for --ssl.\n" msgstr "fetchmail: %s 配置无效，为服务或端口指定大于零的端口\n" #: fetchmail.c:1465 #, c-format msgid "%s configuration invalid, LMTP can't use default SMTP port\n" msgstr "%s 配置无效，LMTP 不能用默认的 SMTP 端口\n" #: fetchmail.c:1479 msgid "Both fetchall and keep on in daemon or idle mode is a mistake!\n" msgstr "收取所有邮件并保留服务器上的备份或使用 idle 模式是错误的！\n" #: fetchmail.c:1489 msgid "fetchmail: Error: idle mode does not work for multiple folders or accounts!\n" msgstr "fetchmail: 错误：idle 模式对多个文件夹或账号不可用！\n" #: fetchmail.c:1507 msgid "cannot parse rcfile, debug mode: dumping obtained configuration as Python:\n" msgstr "" #: fetchmail.c:1522 #, c-format msgid "terminated with signal %d\n" msgstr "以信号 %d 终止\n" #: fetchmail.c:1591 #, c-format msgid "%s querying %s (protocol %s) at %s: poll started\n" msgstr "%1$s 在 %4$s 查寻 %2$s (协议 %3$s): 收件开始\n" #: fetchmail.c:1616 msgid "POP2 support is not configured.\n" msgstr "未设置 POP2 支持\n" #: fetchmail.c:1628 msgid "POP3 support is not configured.\n" msgstr "未设置 POP3 支持\n" #: fetchmail.c:1638 msgid "IMAP support is not configured.\n" msgstr "未设置 IMAP 支持\n" #: fetchmail.c:1644 msgid "ETRN support is not configured.\n" msgstr "未设置 ETRN 支持\n" #: fetchmail.c:1652 msgid "ODMR support is not configured.\n" msgstr "未设置 ODMR 支持\n" #: fetchmail.c:1659 msgid "unsupported protocol selected.\n" msgstr "选中了不支持的协议\n" #: fetchmail.c:1670 #, c-format msgid "%s querying %s (protocol %s) at %s: poll completed\n" msgstr "%1$s 在 %4$s 查询 %2$s (协议 %3$s): 收件完成\n" #: fetchmail.c:1695 #, c-format msgid "Poll interval is %d seconds\n" msgstr "收件间隔 %d 秒\n" #: fetchmail.c:1697 #, c-format msgid "Logfile is %s\n" msgstr "日志文件为 %s\n" #: fetchmail.c:1699 #, c-format msgid "Idfile is %s\n" msgstr "Idfile 文件为 %s\n" #: fetchmail.c:1701 msgid "Progress messages will be logged via syslog\n" msgstr "邮件情况将通过 syslog 来记录\n" #: fetchmail.c:1703 msgid "Fetchmail will masquerade and will not generate Received\n" msgstr "Fetchmail 将进行伪装且不会生成 Receiverd 部分\n" #: fetchmail.c:1705 msgid "Fetchmail will show progress dots even in logfiles.\n" msgstr "Fetchmail 将在日志文件中显示进度条(以点的形式)\n" #: fetchmail.c:1707 #, c-format msgid "Fetchmail will forward misaddressed multidrop messages to %s.\n" msgstr "Fetchmail 将转发地址错误的多投邮件给 %s。\n" #: fetchmail.c:1711 msgid "Fetchmail will direct error mail to the postmaster.\n" msgstr "Fetchmail 将把错误邮件转给邮件管理员\n" #: fetchmail.c:1713 msgid "Fetchmail will direct error mail to the sender.\n" msgstr "Fetchmail 将把错误邮件退给发送者\n" #: fetchmail.c:1716 msgid "Fetchmail will treat permanent errors as permanent (drop messages).\n" msgstr "Fetchmail 将把长期错误当成不可恢复的错误(删除邮件)。\n" #: fetchmail.c:1718 msgid "Fetchmail will treat permanent errors as temporary (keep messages).\n" msgstr "Fetchmail 将把惯性错误当成临时问题(保留邮件)。\n" #: fetchmail.c:1725 #, c-format msgid "Options for retrieving from %s@%s:\n" msgstr "从 %s@%s 收件时的选项:\n" #: fetchmail.c:1729 #, c-format msgid " Mail will be retrieved via %s\n" msgstr " 邮件将通过 %s 收取\n" #: fetchmail.c:1732 #, c-format msgid " Poll of this server will occur every %d interval.\n" msgid_plural " Poll of this server will occur every %d intervals.\n" msgstr[0] "每隔 %d 秒将收取此服务器中的邮件\n" #: fetchmail.c:1736 #, c-format msgid " True name of server is %s.\n" msgstr " 服务器的实名为 %s。\n" #: fetchmail.c:1739 msgid " This host will not be queried when no host is specified.\n" msgstr " 若不指明主机将不查询此主机\n" #: fetchmail.c:1740 msgid " This host will be queried when no host is specified.\n" msgstr " 若不指明主机将查询此主机\n" #: fetchmail.c:1744 msgid " Password will be prompted for.\n" msgstr "密码会被提示\n" #: fetchmail.c:1748 #, c-format msgid " APOP secret = \"%s\".\n" msgstr " APOP 密码 = “%s”\n" #: fetchmail.c:1751 #, c-format msgid " RPOP id = \"%s\".\n" msgstr " RPOP 密码 = “%s”\n" #: fetchmail.c:1754 #, c-format msgid " Password = \"%s\".\n" msgstr " 密码 = “%s”\n" #: fetchmail.c:1763 #, c-format msgid " Protocol is KPOP with Kerberos %s authentication" msgstr " 协议是带有 Kerberos %s 认证协议的 KPOP" #: fetchmail.c:1766 #, c-format msgid " Protocol is %s" msgstr " 协议是 %s" #: fetchmail.c:1768 #, c-format msgid " (using service %s)" msgstr " (正在使用服务 %s)" #: fetchmail.c:1770 msgid " (using default port)" msgstr " (正在使用默认端口)" #: fetchmail.c:1772 msgid " (forcing UIDL use)" msgstr " (正在强制使用 UIDL)" #: fetchmail.c:1778 msgid " All available authentication methods will be tried.\n" msgstr " 将尝试所有有效的验证方式\n" #: fetchmail.c:1781 msgid " Password authentication will be forced.\n" msgstr " 强制密码验证\n" #: fetchmail.c:1784 msgid " MSN authentication will be forced.\n" msgstr " 强制 MSN 验证\n" #: fetchmail.c:1787 msgid " NTLM authentication will be forced.\n" msgstr " 强制 NTLM 验证\n" #: fetchmail.c:1790 msgid " OTP authentication will be forced.\n" msgstr " 强制 OTP 验证\n" #: fetchmail.c:1793 msgid " CRAM-MD5 authentication will be forced.\n" msgstr " 强制 CRAM-MD5 验证\n" #: fetchmail.c:1796 msgid " GSSAPI authentication will be forced.\n" msgstr " 强制 GSSAPI 验证\n" #: fetchmail.c:1799 msgid " Kerberos V4 authentication will be forced.\n" msgstr " 强制 Kerberos V4 验证\n" #: fetchmail.c:1802 msgid " Kerberos V5 authentication will be forced.\n" msgstr " 强制 Kerberos V5 验证\n" #: fetchmail.c:1805 msgid " End-to-end encryption assumed.\n" msgstr " 假设为终端到终端加密\n" #: fetchmail.c:1809 #, c-format msgid " Mail service principal is: %s\n" msgstr " 邮件服务协议验证方为: %s\n" #: fetchmail.c:1812 msgid " SSL encrypted sessions enabled.\n" msgstr "启用 SSL 加密会话\n" #: fetchmail.c:1814 #, c-format msgid " SSL protocol: %s.\n" msgstr " SSL 协议: %s\n" #: fetchmail.c:1816 msgid " SSL server certificate checking enabled.\n" msgstr " 已启用 SSL 服务器证书检查。\n" #: fetchmail.c:1818 msgid " SSL server certificate checking disabled.\n" msgstr " 已禁用 SSL 服务器证书检查\n" #: fetchmail.c:1820 #, fuzzy, c-format #| msgid " SSL trusted certificate file: %s\n" msgid " SSL default trusted certificate file: %s\n" msgstr " SSL 受信证书文件: %s\n" #: fetchmail.c:1822 #, c-format msgid " SSL trusted certificate file: %s\n" msgstr " SSL 受信证书文件: %s\n" #: fetchmail.c:1823 #, fuzzy, c-format #| msgid " SSL trusted certificate directory: %s\n" msgid " SSL default trusted certificate directory: %s\n" msgstr " SSL 受信证书目录: %s\n" #: fetchmail.c:1825 #, c-format msgid " SSL trusted certificate directory: %s\n" msgstr " SSL 受信证书目录: %s\n" #: fetchmail.c:1827 #, c-format msgid " SSL server CommonName: %s\n" msgstr " SSL 服务器名: %s\n" #: fetchmail.c:1829 #, c-format msgid " SSL key fingerprint (checked against the server key): %s\n" msgstr " SSL 密钥指纹 (与服务器密钥对比过): %s\n" #: fetchmail.c:1832 #, c-format msgid " Server nonresponse timeout is %d seconds" msgstr " 服务器未响应，超时 %d 秒" #: fetchmail.c:1834 fetchmail.c:1840 fetchmail.c:1952 fetchmail.c:1972 msgid " (default)" msgstr " (默认)" #: fetchmail.c:1838 #, fuzzy, c-format #| msgid " Server nonresponse timeout is %d seconds" msgid " Server IDLE timeout is %d seconds" msgstr " 服务器未响应，超时 %d 秒" #: fetchmail.c:1846 msgid " Default mailbox selected.\n" msgstr " 已选中默认邮箱。\n" #: fetchmail.c:1851 msgid " Selected mailboxes are:" msgstr " 选中的邮箱是:" #: fetchmail.c:1857 msgid " All messages will be retrieved (--all on).\n" msgstr " 收取所有邮件( --all 选项开启).\n" #: fetchmail.c:1858 msgid " Only new messages will be retrieved (--all off).\n" msgstr " 只收取新邮件( --all 选项关闭).\n" #: fetchmail.c:1860 msgid " Fetched messages will be kept on the server (--keep on).\n" msgstr " 收取的邮件会在服务器上保留副本( --keep 开启).\n" #: fetchmail.c:1861 msgid " Fetched messages will not be kept on the server (--keep off).\n" msgstr " 收取的邮件不会保留在服务器上( --keep 关闭).\n" #: fetchmail.c:1863 #, fuzzy, c-format #| msgid " Messages with bad headers will be rejected.\n" msgid " Message will be moved to %s folder and won't be deleted.\n" msgstr " 邮件头错误的邮件将被拒收。\n" #: fetchmail.c:1865 #, fuzzy #| msgid " Messages will be delivered with \"%s\".\n" msgid " Message will be deleted (no --moveto).\n" msgstr " 邮件通过 “%s” 投递。\n" #: fetchmail.c:1867 msgid " Old messages will be flushed before message retrieval (--flush on).\n" msgstr " 在收取新邮件前删除旧邮件(--flush 开启).\n" #: fetchmail.c:1868 msgid " Old messages will not be flushed before message retrieval (--flush off).\n" msgstr " 在收取新邮件前不删除旧邮件(--flush 关闭).\n" #: fetchmail.c:1870 msgid " Oversized messages will be flushed before message retrieval (--limitflush on).\n" msgstr " 收件前将删除超大的邮件(--limitflush 开启).\n" #: fetchmail.c:1871 msgid " Oversized messages will not be flushed before message retrieval (--limitflush off).\n" msgstr " 收件前将不删除超大的邮件(--limitflush 关闭).\n" #: fetchmail.c:1873 msgid " Rewrite of server-local addresses is enabled (--norewrite off).\n" msgstr " 本地收件人地址重写(--norewrite 关闭).\n" #: fetchmail.c:1874 msgid " Rewrite of server-local addresses is disabled (--norewrite on).\n" msgstr " 不重写本地收件人地址(--norewrite 开启).\n" #: fetchmail.c:1876 msgid " Carriage-return stripping is enabled (stripcr on).\n" msgstr " 回车符清除(stripcr 开启).\n" #: fetchmail.c:1877 msgid " Carriage-return stripping is disabled (stripcr off).\n" msgstr " 不清除回车符(stripcr 关闭).\n" #: fetchmail.c:1879 msgid " Carriage-return forcing is enabled (forcecr on).\n" msgstr " 强行在换行前插入回车符(forcecr 开启).\n" #: fetchmail.c:1880 msgid " Carriage-return forcing is disabled (forcecr off).\n" msgstr " 不在换行前强行插入回车符(forcecr 关闭).\n" #: fetchmail.c:1882 msgid " Interpretation of Content-Transfer-Encoding is disabled (pass8bits on).\n" msgstr " 忽略 Content-Transfer-Encoding (pass8bits 开启).\n" #: fetchmail.c:1883 msgid " Interpretation of Content-Transfer-Encoding is enabled (pass8bits off).\n" msgstr " 不忽略 Content-Transfer-Encoding (pass8bits 关闭).\n" #: fetchmail.c:1885 msgid " MIME decoding is enabled (mimedecode on).\n" msgstr " 解开 MIME 编码 (mimedecode 开启).\n" #: fetchmail.c:1886 msgid " MIME decoding is disabled (mimedecode off).\n" msgstr " 不解开 MIME 编码 (mimedecode 关闭).\n" #: fetchmail.c:1888 msgid " Idle after poll is enabled (idle on).\n" msgstr " 收件后回到 idle 模式 (idle 开启).\n" #: fetchmail.c:1889 msgid " Idle after poll is disabled (idle off).\n" msgstr " 收件后不回到 idle 模式 (idle 关闭).\n" #: fetchmail.c:1891 #, fuzzy #| msgid " Idle after poll is enabled (idle on).\n" msgid " Idle after poll is forced (forceidle on).\n" msgstr " 收件后回到 idle 模式 (idle 开启).\n" #: fetchmail.c:1892 #, fuzzy #| msgid " Idle after poll is disabled (idle off).\n" msgid " Idle after poll is not forced (forceidle off).\n" msgstr " 收件后不回到 idle 模式 (idle 关闭).\n" #: fetchmail.c:1894 msgid " Nonempty Status lines will be discarded (dropstatus on)\n" msgstr " 删除带有 Status 字样的行 (dropstatus 开启)\n" #: fetchmail.c:1895 msgid " Nonempty Status lines will be kept (dropstatus off)\n" msgstr " 保留带有 Status 字样的 行 (dropstatus 关闭)\n" #: fetchmail.c:1897 msgid " Delivered-To lines will be discarded (dropdelivered on)\n" msgstr " 删除带有 Delivered-to 的行 (dropdelivered 开启)\n" #: fetchmail.c:1898 msgid " Delivered-To lines will be kept (dropdelivered off)\n" msgstr " 保留带有 Delivered-to 的行 (dropdelivered 关闭)\n" #: fetchmail.c:1902 #, c-format msgid " Message size limit is %d octets (--limit %d).\n" msgstr " 邮件大小被限制为 %d 字节 (--limit %d).\n" #: fetchmail.c:1905 msgid " No message size limit (--limit 0).\n" msgstr " 邮件大小无限制 (--limit 0).\n" #: fetchmail.c:1907 #, c-format msgid " Message size warning interval is %d seconds (--warnings %d).\n" msgstr " 每隔 %d 秒发出邮件大小警告 (--warnings %d).\n" #: fetchmail.c:1910 msgid " Size warnings on every poll (--warnings 0).\n" msgstr " 每次收件都给出邮件大小警告 (--warnings 0).\n" #: fetchmail.c:1913 #, c-format msgid " Received-message limit is %d (--fetchlimit %d).\n" msgstr " 单次收件限制为 %d 封(--fetchlimit %d).\n" #: fetchmail.c:1916 msgid " No received-message limit (--fetchlimit 0).\n" msgstr " 无收件限制 (--fetchlimit 0).\n" #: fetchmail.c:1918 #, c-format msgid " Fetch message size limit is %d (--fetchsizelimit %d).\n" msgstr " 限制所收邮件大小为 %d 字节(--fetchsizelimit %d).\n" #: fetchmail.c:1921 msgid " No fetch message size limit (--fetchsizelimit 0).\n" msgstr " 所收邮件大小无限制 (--fetchsizelimit 0).\n" #: fetchmail.c:1925 msgid " Do binary search of UIDs during each poll (--fastuidl 1).\n" msgstr " 每次收件期间对 UIDs 进行折半查找 (--fastuidl 1).\n" #: fetchmail.c:1927 #, c-format msgid " Do binary search of UIDs during %d out of %d polls (--fastuidl %d).\n" msgstr " 每 %2$d 次收件中有 %1$d 次对 UIDs 进行折半查找 (--fastuidl %3$d).\n" #: fetchmail.c:1930 msgid " Do linear search of UIDs during each poll (--fastuidl 0).\n" msgstr " 每次收件期间对 UIDs 进行线性查找 (--fastuidl 0).\n" #: fetchmail.c:1932 #, c-format msgid " SMTP message batch limit is %d.\n" msgstr " 单次 SMTP 会话中最多传送 %d 封邮件。\n" #: fetchmail.c:1934 msgid " No SMTP message batch limit (--batchlimit 0).\n" msgstr " 单次 SMTP 会话中无传送邮件限制 (--batchlimit 0)。\n" #: fetchmail.c:1938 #, c-format msgid " Deletion interval between expunges forced to %d (--expunge %d).\n" msgstr " 两次删除操作之间最多传送 %d 封邮件(--expunge %d)。\n" #: fetchmail.c:1940 msgid " No forced expunges (--expunge 0).\n" msgstr " 两次删除操作之间无传送邮件限制(--expunge 0)。\n" #: fetchmail.c:1947 msgid " Domains for which mail will be fetched are:" msgstr " 要收取的邮件位于服务器:" #: fetchmail.c:1957 #, c-format msgid " Messages will be appended to %s as BSMTP\n" msgstr " 邮件作为 BSMTP 附加至 %s\n" #: fetchmail.c:1959 #, c-format msgid " Messages will be delivered with \"%s\".\n" msgstr " 邮件通过 “%s” 投递。\n" #: fetchmail.c:1966 #, c-format msgid " Messages will be %cMTP-forwarded to:" msgstr " 邮件将被 %cMPT 转发到:" #: fetchmail.c:1977 #, c-format msgid " Host part of MAIL FROM line will be %s\n" msgstr " MAIL FROM 这一行的 Host 部分是 %s\n" #: fetchmail.c:1980 #, c-format msgid " Address to be put in RCPT TO lines shipped to SMTP will be %s\n" msgstr " RCPT TO 这一行中将要被送往 SMTP 的地址是　%s\n" #: fetchmail.c:1989 msgid " Recognized listener spam block responses are:" msgstr " 识别出的监听端垃圾邮件拒收响应为:" # fetchmail.c:1809 #: fetchmail.c:1995 msgid " Spam-blocking disabled\n" msgstr " 关闭垃圾邮件拒收\n" #: fetchmail.c:1998 #, c-format msgid " Server connection will be brought up with \"%s\".\n" msgstr " 服务器连接将被 “%s” 唤起\n" #: fetchmail.c:2001 msgid " No pre-connection command.\n" msgstr " 无连接前要执行的程序。\n" #: fetchmail.c:2003 #, c-format msgid " Server connection will be taken down with \"%s\".\n" msgstr " 服务器连接将被 “%s” 关闭。\n" #: fetchmail.c:2006 msgid " No post-connection command.\n" msgstr " 无连接后要执行的程序。\n" #: fetchmail.c:2009 msgid " No localnames declared for this host.\n" msgstr " 此服务器没有要关联的本地用户名。\n" #: fetchmail.c:2019 msgid " Multi-drop mode: " msgstr " 多投模式: " #: fetchmail.c:2021 msgid " Single-drop mode: " msgstr " 单投模式: " #: fetchmail.c:2023 #, c-format msgid "%d local name recognized.\n" msgid_plural "%d local names recognized.\n" msgstr[0] "识别出 %d 个本地用户名。\n" #: fetchmail.c:2038 msgid " DNS lookup for multidrop addresses is enabled.\n" msgstr " 启用 DNS 搜寻多投地址。\n" #: fetchmail.c:2039 msgid " DNS lookup for multidrop addresses is disabled.\n" msgstr " 关闭 DNS 搜寻多投地址。\n" #: fetchmail.c:2043 msgid " Server aliases will be compared with multidrop addresses by IP address.\n" msgstr " 服务器昵称将以 IP 地址与多投地址进行比较\n" #: fetchmail.c:2045 msgid " Server aliases will be compared with multidrop addresses by name.\n" msgstr " 服务器昵称将以名字与多投地址进行比较\n" #: fetchmail.c:2048 msgid " Envelope-address routing is disabled\n" msgstr " 禁用 Envelope-address 路由\n" #: fetchmail.c:2051 #, c-format msgid " Envelope header is assumed to be: %s\n" msgstr " 邮件头假定为: %s\n" #: fetchmail.c:2054 #, c-format msgid " Number of envelope headers to be skipped over: %d\n" msgstr " 跳过的邮件头数目为: %d\n" #: fetchmail.c:2057 #, c-format msgid " Prefix %s will be removed from user id\n" msgstr " 将从用户 id 中移除前缀 %s\n" #: fetchmail.c:2060 msgid " No prefix stripping\n" msgstr " 没有要从用户 id 中清除的前缀\n" #: fetchmail.c:2065 msgid " Predeclared mailserver aliases:" msgstr " 预先声明的邮件服务器昵称: " #: fetchmail.c:2073 msgid " Local domains:" msgstr " 本地域:" #: fetchmail.c:2083 #, c-format msgid " Connection must be through interface %s.\n" msgstr " 必须通过地址 %s 连接\n" #: fetchmail.c:2085 msgid " No interface requirement specified.\n" msgstr " 未指定地址要求。\n" #: fetchmail.c:2087 #, c-format msgid " Polling loop will monitor %s.\n" msgstr " 收件轮循将监听 %s。\n" #: fetchmail.c:2089 msgid " No monitor interface specified.\n" msgstr " 未指定监听地址。\n" #: fetchmail.c:2093 #, c-format msgid " Server connections will be made via plugin %s (--plugin %s).\n" msgstr " 通过外部程序 %s 进行服务器连接 (--plugin %s)。\n" #: fetchmail.c:2095 msgid " No plugin command specified.\n" msgstr " 未指定外部程序。\n" #: fetchmail.c:2097 #, c-format msgid " Listener connections will be made via plugout %s (--plugout %s).\n" msgstr " 通过外部程序 %s 进行 SMTP 连接(--plugout %s)。\n" #: fetchmail.c:2099 msgid " No plugout command specified.\n" msgstr " 未指定外部程序。\n" #: fetchmail.c:2106 msgid " No UIDs saved from this host.\n" msgstr " 未从此主机上保存 UIDs。\n" #: fetchmail.c:2109 #, c-format msgid " %d UIDs saved.\n" msgstr " 保存了 %d 个UIDs。\n" #: fetchmail.c:2115 msgid " Poll trace information will be added to the Received header.\n" msgstr " 收件跟踪信息将被加入 Received 邮件头。\n" #: fetchmail.c:2117 msgid " No poll trace information will be added to the Received header.\n" msgstr "" " 无收件跟踪信息要被加入 Received 邮件头。\n" "。\n" #: fetchmail.c:2122 msgid " Messages with bad headers will be rejected.\n" msgstr " 邮件头错误的邮件将被拒收。\n" #: fetchmail.c:2125 msgid " Messages with bad headers will be passed on.\n" msgstr " 邮件头错误的邮件可以接收。\n" #: fetchmail.c:2130 #, c-format msgid " Pass-through properties \"%s\".\n" msgstr " 传送的 properties 选项为 “%s” 。\n" #: fm_getaddrinfo.c:23 fm_getaddrinfo.c:30 #, c-format msgid "Cannot modify signal mask: %s" msgstr "无法修改信号 mask：%s" #: fm_realpath.c:35 msgid "Your operating system neither defines PATH_MAX nor will it accept realpath(f, NULL). Aborting.\n" msgstr "您的操作系统既未定义 PATH_MAX 也不接受 realpath(f, NULL)。中止操作。\n" #: getpass.c:128 msgid "" "\n" "Caught SIGINT... bailing out.\n" msgstr "" "\n" "遇到信号 SIGINT... 正在退出\n" #: gssapi.c:51 #, c-format msgid "GSSAPI error in gss_display_status called from <%s>\n" msgstr "来自 <%s> 的 gss_display_status 调用中有 GSSAPI 错误\n" #: gssapi.c:54 #, c-format msgid "GSSAPI error %s: %.*s\n" msgstr "GSSAPI 错误 %s: %.*s\n" #: gssapi.c:89 #, c-format msgid "Couldn't get service name for [%s]\n" msgstr "无法获得服务 [%s]\n" #: gssapi.c:94 #, c-format msgid "Using service name [%s]\n" msgstr "正在使用服务 [%s]\n" #: gssapi.c:121 msgid "No suitable GSSAPI credentials found. Skipping GSSAPI authentication.\n" msgstr "未找到合适的 GSSAPI 证书。忽略 GSSAPI 认证。\n" #: gssapi.c:122 msgid "If you want to use GSSAPI, you need credentials first, possibly from kinit.\n" msgstr "如您想使用 GSSAPI，您首先需要证书，也许来自 kinit。\n" #: gssapi.c:158 #, c-format msgid "Received malformed challenge to \"%s GSSAPI\"!\n" msgstr "接收到怪异的请求 \"%s GSSAPI\"！\n" #: gssapi.c:168 msgid "Sending credentials\n" msgstr "正在发送证书\n" #: gssapi.c:199 msgid "Error exchanging credentials\n" msgstr "交换证书时出错\n" #: gssapi.c:241 msgid "Couldn't unwrap security level data\n" msgstr "无法解开加密数据\n" #: gssapi.c:246 msgid "Credential exchange complete\n" msgstr "证书交换完成\n" #: gssapi.c:250 msgid "Server requires integrity and/or privacy\n" msgstr "服务器要求完整性和(或)隐私检查\n" #: gssapi.c:259 #, c-format msgid "Unwrapped security level flags: %s%s%s\n" msgstr "解开的加密标识: %s%s%s\n" #: gssapi.c:263 #, c-format msgid "Maximum GSS token size is %ld\n" msgstr "最大 GSS 标识大小为 %ld\n" #: gssapi.c:272 msgid "GSSAPI username too long for static buffer.\n" msgstr "GSSAPI 用户名对静态缓冲区过长。\n" #: gssapi.c:281 msgid "Error creating security level request\n" msgstr "创建加密请求时出错\n" #: gssapi.c:285 #, c-format msgid "GSSAPI send_token too large (%lu) while sending username.\n" msgstr "发送用户名时 GSSAPI 的 send_token 过大（%lu）。\n" #: gssapi.c:296 msgid "Releasing GSS credentials\n" msgstr "正在清空 GSS 证书\n" #: gssapi.c:300 msgid "Error releasing credentials\n" msgstr "清空证书时出错\n" #: imap.c:89 msgid "Protocol identified as IMAP4 rev 1\n" msgstr "协议被识别为 IMAP4 版本 1\n" #: imap.c:93 msgid "Protocol identified as IMAP4 rev 0\n" msgstr "协议被识别为 IMAP4 版本 0\n" #: imap.c:97 msgid "Protocol identified as IMAP2 or IMAP2BIS\n" msgstr "协议被识别为 IMAP2 或 IMAP2BIS\n" #: imap.c:107 msgid "will idle after poll\n" msgstr "收件后恢复至 idle 模式\n" #: imap.c:134 #, c-format msgid "Received BYE response from IMAP server: %s\n" msgstr "从 IMAP 服务器收到 BYE 指令: %s\n" #: imap.c:156 #, c-format msgid "bogus message count in \"%s\"!" msgstr "发现伪造邮件\"%s\"！" #: imap.c:203 #, fuzzy, c-format #| msgid "bogus EXPUNGE count in \"%s\"!" msgid "bogus EXPUNGE message number in untagged response \"%s\"!" msgstr "发现伪造的EXPUNGE \"%s\"！" #: imap.c:301 msgid "found updated capabilities list\n" msgstr "" #: imap.c:441 msgid "server did not advertise SASL-IR extension but fetchmail's implementation requires it for AUTHENTICATE EXTERNAL\n" msgstr "" #: imap.c:495 #, c-format msgid "%s: configuration requires TLS, but STARTTLS is not permitted because of authenticated state (PREAUTH). Aborting connection. If your plugin is secure, you can defeat STARTTLS with --sslproto '' (see manual).\n" msgstr "" #: imap.c:498 #, c-format msgid "%s: configuration requires TLS, but STARTTLS is not permitted because of authenticated state (PREAUTH). Aborting connection. Server permitting, try --ssl instead (see manual).\n" msgstr "" #: imap.c:518 pop3.c:444 #, c-format msgid "%s: upgrade to TLS succeeded.\n" msgstr "%s: 成功升级至 TLS 协议。\n" #: imap.c:543 pop3.c:455 #, c-format msgid "%s: upgrade to TLS failed.\n" msgstr "%s: 升级至 TLS 协议失败。\n" #: imap.c:548 #, c-format msgid "%s: opportunistic upgrade to TLS failed, trying to continue\n" msgstr "%s: 即时升级至 TLS 协议失败，继续尝试\n" #: imap.c:563 #, c-format msgid "%s: WARNING: server offered STARTTLS but sslproto '' given.\n" msgstr "%s：警告：服务器提供了 STARTTLS 但给出了 sslproto ''。\n" #: imap.c:601 #, c-format msgid "%s: --auth external requested but server does not advertise it.\n" msgstr "" #: imap.c:685 msgid "Required OTP capability not compiled into fetchmail\n" msgstr "需要的 OTP 功能未被编译进 fetchmail\n" #: imap.c:705 pop3.c:577 msgid "Required NTLM capability not compiled into fetchmail\n" msgstr "需要的 NTLM 功能未被编译进 fetchmail\n" #: imap.c:718 #, c-format msgid "%s: --auth password requested but server forbids it (LOGINDISABLED).\n" msgstr "" #: imap.c:747 #, fuzzy, c-format #| msgid "We've run out of allowed authenticators and cannot continue.\n" msgid "%s: we've run out of authentication methods and cannot log in.\n" msgstr "我们已经用完了可用的验证方式，无法继续\n" #: imap.c:771 #, c-format msgid "mail expunge mismatch (%d actual != %d expected)\n" msgstr "邮件删除数不相等 (实际删除 %d 封!= 已删除 %d 封)\n" #: imap.c:898 #, c-format msgid "%lu is unseen\n" msgstr "%lu 封未读\n" #: imap.c:948 pop3.c:849 pop3.c:861 pop3.c:1109 pop3.c:1116 #, c-format msgid "%u is unseen\n" msgstr "%u 未读\n" #: imap.c:983 imap.c:1042 msgid "re-poll failed\n" msgstr "重新收件失败\n" #: imap.c:991 imap.c:1047 #, c-format msgid "%d message waiting after re-poll\n" msgid_plural "%d messages waiting after re-poll\n" msgstr[0] "重新收件后又有 %d 封邮件等待收取\n" #: imap.c:1008 msgid "mailbox selection failed\n" msgstr "邮箱选择失败\n" #: imap.c:1012 #, c-format msgid "%d message waiting after first poll\n" msgid_plural "%d messages waiting after first poll\n" msgstr[0] "首次收件后又有 %d 封邮件等待收取\n" #: imap.c:1026 msgid "expunge failed\n" msgstr "删除操作失败\n" #: imap.c:1030 #, c-format msgid "%d message waiting after expunge\n" msgid_plural "%d messages waiting after expunge\n" msgstr[0] "删除操作后有 %d 封邮件等待收取\n" #: imap.c:1069 msgid "search for unseen messages failed\n" msgstr "查找未读邮件失败\n" #: imap.c:1074 pop3.c:870 #, c-format msgid "%u is first unseen\n" msgstr "%u 是首个未读邮件\n" #: imap.c:1158 msgid "Warning: ignoring bogus data for message sizes returned by the server.\n" msgstr "警告: 忽略服务器返回的邮件大小的无效数据。\n" #: imap.c:1257 imap.c:1264 #, c-format msgid "Incorrect FETCH response: %s.\n" msgstr "FETCH 响应不正确: %s。\n" #: interface.c:248 msgid "Unable to open kvm interface. Make sure fetchmail is SGID kmem." msgstr "无法打开 kvm 接口。确保 fetchmail 是 SGID kmem" #: interface.c:372 #, c-format msgid "Unable to parse interface name from %s" msgstr "无法从 %s 分析得出地址名" #: interface.c:394 msgid "get_ifinfo: sysctl (iflist estimate) failed" msgstr "get_ifinfo: sysctl (iflist 测试) 失败" #: interface.c:400 msgid "get_ifinfo: malloc failed" msgstr "get_ifinfo: malloc 失败" #: interface.c:406 msgid "get_ifinfo: sysctl (iflist) failed" msgstr "get_ifinfo: sysctl (iflist) 失败" #: interface.c:424 #, c-format msgid "Routing message version %d not understood." msgstr "未知的路径信息版本 %d。" #: interface.c:456 #, c-format msgid "No interface found with name %s" msgstr "未找到以 %s 命名的网卡" #: interface.c:514 #, c-format msgid "No IP address found for %s" msgstr "未找到 %s 的 IP 地址" #: interface.c:566 msgid "missing IP interface address\n" msgstr "未找到 IP 地址\n" #: interface.c:582 msgid "invalid IP interface address\n" msgstr "无效的 IP 地址\n" #: interface.c:588 msgid "invalid IP interface mask\n" msgstr "无效的 IP 地址掩码\n" #: interface.c:627 #, c-format msgid "activity on %s -noted- as %d\n" msgstr "%s 的活跃度为 %d\n" #: interface.c:642 #, c-format msgid "skipping poll of %s, %s down\n" msgstr "跳过 %s 收件，%s 关闭了\n" #: interface.c:661 #, c-format msgid "skipping poll of %s, %s IP address excluded\n" msgstr "跳过 %s 收件，拒绝接受 %s 的 IP 地址\n" #: interface.c:673 #, c-format msgid "activity on %s checked as %d\n" msgstr "%s 的活跃度查为 %d\n" #: interface.c:699 #, c-format msgid "skipping poll of %s, %s inactive\n" msgstr "跳过 %s 收件，%s 未开启\n" #: interface.c:706 #, c-format msgid "activity on %s was %d, is %d\n" msgstr "%s 的活跃度以前是 %d，现在是 %d\n" #: kerberos.c:72 msgid "could not decode initial BASE64 challenge\n" msgstr "无法解码起始部分的 BASE64 编码请求\n" #: kerberos.c:135 #, c-format msgid "principal %s in ticket does not match -u %s\n" msgstr "证书中的验证方 %s 与 -u 选项中的 %s 不匹配\n" #: kerberos.c:143 #, c-format msgid "non-null instance (%s) might cause strange behavior\n" msgstr "非空情况 (%s) 可能导致奇怪的行为\n" #: kerberos.c:209 msgid "could not decode BASE64 ready response\n" msgstr "无法解码 BASE64 ready 响应\n" #: kerberos.c:216 msgid "challenge mismatch\n" msgstr "请求不匹配\n" #: lock.c:83 #, c-format msgid "fetchmail: error reading lockfile \"%s\": %s\n" msgstr "fetchmail: 读取锁文件“%s”时发生错误: %s\n" #: lock.c:94 #, c-format msgid "fetchmail: removing stale lockfile \"%s\"\n" msgstr "fetchmail: 正在移除过时的锁文件“%s”\n" #: lock.c:98 #, c-format msgid "fetchmail: cannot unlink lockfile \"%s\" (%s), trying to write to it\n" msgstr "fetchmail: 无法删除锁文件“%s”（%s），尝试对其进行写入\n" #: lock.c:112 #, fuzzy, c-format #| msgid "fetchmail: cannot write to lockfile \"%s\" (%s), exiting\n" msgid "fetchmail: cannot write to lockfile \"%s\" either (%s), exiting\n" msgstr "fetchmail: 无法写入锁文件“%s”（%s），正在退出\n" #: lock.c:122 #, c-format msgid "fetchmail: error opening lockfile \"%s\": %s\n" msgstr "fetchmail: 打开锁文件“%s”时发生错误：%s\n" #: lock.c:172 #, c-format msgid "fetchmail: lock creation failed, pidfile \"%s\": %s\n" msgstr "fetchmail: 锁文件创建失败，pidfile“%s”：%s\n" #: lock.c:183 #, c-format msgid "fetchmail: cannot remove or truncate pidfile \"%s\": %s\n" msgstr "fetchmail: 无法删除或截断 pidfile“%s”：%s\n" #: netrc.c:105 #, fuzzy, c-format #| msgid "Cannot open fetchids file %s for writing: %s\n" msgid "%s: cannot open file for reading: %s\n" msgstr "无法打开 fetchids 文件 %s 写入: %s\n" #: netrc.c:113 #, c-format msgid "%s: rejecting file, cannot get file descriptor number for fstat: %s\n" msgstr "" #: netrc.c:118 #, c-format msgid "%s: rejecting file, cannot fstat(%d): %s\n" msgstr "" #: netrc.c:216 #, c-format msgid "%s: rejecting file because it is group or other accessible (mode %#o) and contains passwords.\n" msgstr "" #: netrc.c:247 #, c-format msgid "%s:%d: warning: found \"%s\" before any host names\n" msgstr "%s:%d: 警告: 在任意主机名前发现 “%s”\n" #: netrc.c:276 #, c-format msgid "%s:%d: machine entry not permitted after default, rejecting file.\n" msgstr "" #: netrc.c:291 #, c-format msgid "%s:%d: warning: unknown token \"%s\"\n" msgstr "%s:%d: 警告: 未知标识“%s”\n" #: netrc.c:299 netrc.c:305 #, fuzzy, c-format #| msgid "fetchmail: error reading lockfile \"%s\": %s\n" msgid "%s: error reading file (%s).\n" msgstr "fetchmail: 读取锁文件“%s”时发生错误: %s\n" #: ntlmsubr.c:35 msgid "Warning: received malformed challenge to \"AUTH(ENTICATE) NTLM\"!\n" msgstr "警告：接收到格式错误的请求至 \"AUTH(ENTICATE) NTLM\"！\n" #: ntlmsubr.c:84 msgid "NTLM challenge contains invalid data.\n" msgstr "NTLM challenge 包含了无效的数据。\n" #: odmr.c:58 #, c-format msgid "%s's SMTP listener does not support ATRN\n" msgstr "%s 的 SMTP 端不支持 ATRN\n" #: odmr.c:96 msgid "Turnaround now...\n" msgstr "正在转向 ...\n" #: odmr.c:101 msgid "ATRN request refused.\n" msgstr "拒绝 ATRN 请求\n" #: odmr.c:105 msgid "Unable to process ATRN request now\n" msgstr "现在无法处理 ATRN 请求\n" #: odmr.c:110 msgid "You have no mail.\n" msgstr "您没有邮件\n" #: odmr.c:114 msgid "Command not implemented\n" msgstr "指令未执行\n" #: odmr.c:118 msgid "Authentication required.\n" msgstr "要求验证\n" #: odmr.c:123 #, c-format msgid "Unknown ODMR error \"%s\"\n" msgstr "未知的 ODMR 错误 \"%s\"\n" #: odmr.c:183 msgid "receiving message data\n" msgstr "正在接收邮件数据\n" #: odmr.c:238 msgid "Option --keep is not supported with ODMR\n" msgstr "ODMR 不支持 --keep 选项\n" #: odmr.c:242 msgid "Option --flush is not supported with ODMR\n" msgstr "ODMR 不支持 --flush 选项\n" #: odmr.c:246 msgid "Option --folder is not supported with ODMR\n" msgstr "ODMR 不支持 --folder 选项\n" #: odmr.c:250 msgid "Option --check is not supported with ODMR\n" msgstr "ODMR 不支持 --check 选项\n" #: opie.c:41 msgid "server recv fatal\n" msgstr "服务器 recv 错\n" #: opie.c:55 msgid "Could not decode OTP challenge\n" msgstr "无法解码 OTP 请求\n" #: opie.c:63 pop3.c:605 msgid "Secret pass phrase: " msgstr "密码短语:" #: options.c:184 #, c-format msgid "String '%s' is not a valid number string.\n" msgstr "字符串 ‘%s’不是一个有效的数字串。\n" #: options.c:193 #, c-format msgid "Value of string '%s' is %s than %d.\n" msgstr "字符串 ‘%1$s’ 的值比 %3$d %2$s\n" #: options.c:194 msgid "smaller" msgstr "小" #: options.c:194 msgid "larger" msgstr "大" #: options.c:308 #, c-format msgid "Invalid bad-header policy `%s' specified.\n" msgstr "设定的错误邮件头处理方式‘%s’无效。\n" #: options.c:349 #, c-format msgid "Invalid protocol `%s' specified.\n" msgstr "指定了无效的协议 ‘%s’\n" #: options.c:399 #, c-format msgid "Invalid authentication `%s' specified.\n" msgstr "指定了无效的认证方式 ‘%s’\n" #: options.c:629 msgid "usage: fetchmail [options] [server ...]\n" msgstr "用法: fetchmail [选项] [服务器...]\n" #: options.c:630 msgid " Options are as follows:\n" msgstr "选项如下:\n" #: options.c:631 msgid " -?, --help display this option help\n" msgstr " -?, --help\t显示此选项帮助\n" #: options.c:632 msgid " -V, --version display version info\n" msgstr " -V, --version\t显示版本信息\n" #: options.c:634 msgid " -c, --check check for messages without fetching\n" msgstr " -c, --check\t只检查邮件而不收取\n" #: options.c:635 msgid " -s, --silent work silently\n" msgstr " -s, --silent\t运行时不要显示多余信息\n" #: options.c:636 msgid " -v, --verbose work noisily (diagnostic output)\n" msgstr " -v, --verbose\t运行时给出信息 (诊断型的输出)\n" #: options.c:637 msgid " -d, --daemon run as a daemon once per n seconds\n" msgstr " -d, --daemon\t每 n 秒运行后台服务一次\n" #: options.c:638 msgid " -N, --nodetach don't detach daemon process\n" msgstr " -N, --nodetach\t不分离后台进程\n" #: options.c:639 msgid " -q, --quit kill daemon process\n" msgstr " -q, --quit\t终止后台进程\n" #: options.c:640 msgid " -L, --logfile specify logfile name\n" msgstr " -L, --logfile\t指定日志文件名\n" #: options.c:641 msgid " --syslog use syslog(3) for most messages when running as a daemon\n" msgstr " --syslog\t以后台服务运行时用 syslog(3) 得到更多的信息\n" #: options.c:642 msgid " --nosyslog turns off use of syslog(3)\n" msgstr " --nosyslog 不要使用 syslog(3)\n" #: options.c:643 msgid " --invisible don't write Received & enable host spoofing\n" msgstr " --invisible\t不写 Received 邮件头并允许伪装主机\n" #: options.c:644 msgid " -f, --fetchmailrc specify alternate run control file\n" msgstr " -f, --fetchmailrc\t指定可选的配置文件\n" #: options.c:645 msgid " -i, --idfile specify alternate UIDs file\n" msgstr " -i, --idfile\t指定可选的 UIDs 文件\n" #: options.c:646 msgid " --pidfile specify alternate PID (lock) file\n" msgstr " --pidfile\t指定可选的进程(锁)文件\n" #: options.c:647 msgid " --postmaster specify recipient of last resort\n" msgstr " --postmaster\t指定邮件管理员\n" #: options.c:648 msgid " --nobounce redirect bounces from user to postmaster.\n" msgstr " --nobounce\t将回送邮件从用户重定向至邮件管理员\n" #: options.c:649 msgid " --nosoftbounce fetchmail deletes permanently undeliverable messages.\n" msgstr " --nosoftbounce\t让 fetchmail 永久删除无法投递的邮件。\n" #: options.c:650 msgid " --softbounce keep permanently undeliverable messages on server (default).\n" msgstr " --softbounce\t将无法投递的邮件长期保留在服务器上(默认)。\n" #: options.c:652 msgid " -I, --interface interface required specification\n" msgstr " -I, --interface\t指定网络地址\n" #: options.c:653 msgid " -M, --monitor monitor interface for activity\n" msgstr " -M, --moniter\t监控指定网络地址的活跃度\n" #: options.c:656 #, fuzzy #| msgid " --ssl enable ssl encrypted session\n" msgid " --ssl enable SSL/TLS-wrapped encrypted session\n" msgstr " --ssl\t启用 ssl 加密会话\n" #: options.c:657 #, fuzzy #| msgid " --ssl enable ssl encrypted session\n" msgid " --nossl disable SSL/TLS-wrapped encrypted session\n" msgstr " --ssl\t启用 ssl 加密会话\n" #: options.c:658 msgid " --sslkey ssl private key file\n" msgstr " --sslkey\tssl 私钥文件\n" #: options.c:659 msgid " --sslcert ssl client certificate\n" msgstr " --sslcert\tssl 客户端证书\n" #: options.c:660 msgid " --sslcertck do strict server certificate check (recommended)\n" msgstr " --sslcertck\t进行严格的服务器证书检查(推荐)\n" #: options.c:661 msgid " --nosslcertck skip strict server certificate check (insecure)\n" msgstr " --nosslcertck 跳过严格的服务器证书检查（不安全）\n" #: options.c:662 msgid " --sslcertfile path to trusted-CA ssl certificate file\n" msgstr " --sslcertfile 受信 CA ssl 证书文件名\n" #: options.c:663 msgid " --sslcertpath path to trusted-CA ssl certificate directory\n" msgstr " --sslcertpath 受信 CA ssl 证书文件的目录\n" #: options.c:664 msgid " --sslcommonname expect this CommonName from server (discouraged)\n" msgstr " --sslcommonname\t期望返回服务器名 (不鼓励)\n" #: options.c:665 msgid " --sslfingerprint fingerprint that must match that of the server's cert.\n" msgstr " --sslfingerprint\t指定一个指纹，它必须与服务器证书的指纹匹配\n" #: options.c:666 #, fuzzy #| msgid " --sslproto force ssl protocol (see manual)\n" msgid " --sslproto force ssl protocol (see manual) and/or STLS/STARTTLS\n" msgstr " --sslproto 指定强制使用的 ssl 协议（请参见使用手册）\n" #: options.c:668 msgid " --plugin specify external command to open connection\n" msgstr " --plugin\t指定外部程序打开连接\n" #: options.c:669 msgid " --plugout specify external command to open smtp connection\n" msgstr " --plugout\t指定外部程序打开 smtp 连接\n" #: options.c:670 msgid "" " --bad-header {reject|accept}\n" " specify policy for handling messages with bad headers\n" msgstr "" " --bad-header {reject|accept}\n" " 设定对邮件头错误的邮件的处理方式\n" #: options.c:673 msgid " -p, --proto[col] specify retrieval protocol (see man page)\n" msgstr " -p, --proto[col] 指定收件协议（请参见 man 手册页）\n" #: options.c:674 msgid " -U, --uidl force the use of UIDLs (pop3 only)\n" msgstr " -U, --uidl\t强制使用 UIDLs(仅适用于 pop3)\n" #: options.c:675 msgid " --idle tells the IMAP server to send notice of new messages\n" msgstr " --idle 告知 IMAP 服务器为新邮件发送通知\n" #: options.c:676 msgid " --forceidle Force idle mode, even if server does not advertise the capability\n" msgstr "" #: options.c:677 #, c-format msgid " --idletimeout specify timeout before refreshing --idle (%d s)\n" msgstr "" #: options.c:678 msgid " --port TCP port to connect to (obsolete, use --service)\n" msgstr " --port\t要连接的 TCP 端口(过时了，用 --service)\n" #: options.c:679 msgid " -P, --service TCP service to connect to (can be numeric TCP port)\n" msgstr " -P, --service\t要连接的 TCP 服务(允许用 TCP 端口的数值来表示)\n" #: options.c:680 msgid " --auth authentication type (see manual)\n" msgstr " --auth 指定验证方式（请参见使用手册）\n" #: options.c:681 msgid " -t, --timeout server nonresponse timeout\n" msgstr " -t, --timeout\t指定服务器超时无响应的时间\n" #: options.c:682 msgid " -E, --envelope envelope address header\n" msgstr " -E, --envelope\t指定邮件地址头\n" #: options.c:683 msgid " -Q, --qvirtual prefix to remove from local user id\n" msgstr " -Q, --qvirtual\t从当前用户移除前缀\n" #: options.c:684 msgid " --principal mail service principal\n" msgstr " --principal\t邮件服务验证方\n" #: options.c:685 msgid " --tracepolls add poll-tracing information to Received header\n" msgstr " --tracepolls\tReceived 邮件头中添加收件跟踪信息\n" #: options.c:687 msgid " -u, --user[name] specify users's login on server\n" msgstr " -u, --user[name] 指定登录服务器的用户名\n" #: options.c:688 msgid " -a, --[fetch]all retrieve old and new messages\n" msgstr " -a, --[fetch]all\t收取所有新旧邮件\n" #: options.c:689 msgid " -K, --nokeep delete new messages after retrieval\n" msgstr " -K, --nokeep\t收件后删除服务器上新邮件\n" #: options.c:690 msgid " -k, --keep save new messages after retrieval\n" msgstr " -k, --keep\t收件后保留服务器上新邮件\n" #: options.c:691 msgid " --moveto move message to the given IMAP folder instead of deleting it\n" msgstr "" #: options.c:692 msgid " -F, --flush delete old messages from server\n" msgstr " -F, --flush\t从服务器上删除旧邮件\n" #: options.c:693 msgid " --limitflush delete oversized messages\n" msgstr " --limitflush\t删除过大的邮件\n" #: options.c:694 msgid " -n, --norewrite don't rewrite header addresses\n" msgstr " -n, --norewrite\t不要重写地址头\n" #: options.c:695 msgid " -l, --limit don't fetch messages over given size\n" msgstr " -l, --limit\t不收超过指定大小的邮件\n" #: options.c:696 msgid " -w, --warnings interval between warning mail notification\n" msgstr " -w, --warnings\t邮件通知警告的间隔\n" #: options.c:698 msgid " -S, --smtphost set SMTP forwarding host\n" msgstr " -S, --smtphost\t设置 SMTP 转发主机\n" #: options.c:699 msgid " --fetchdomains fetch mail for specified domains\n" msgstr " --fetchdomains\t收取指定域的邮件\n" #: options.c:700 msgid " -D, --smtpaddress set SMTP delivery domain to use\n" msgstr " -D, --smtpaddress\t设置 SMTP 投递域\n" #: options.c:701 msgid " --smtpname set SMTP full name username@domain\n" msgstr " --smtpname\t设置 SMTP 全名，用户名@域\n" #: options.c:702 #, fuzzy #| msgid " -Z, --antispam, set antispam response values\n" msgid " -Z, --antispam set antispam response values\n" msgstr " -Z, --antispam,\t设置 antispam 响应值\n" #: options.c:703 msgid " -b, --batchlimit set batch limit for SMTP connections\n" msgstr " -b, --bathlimit\t为 SMTP 连接设置批量处理限制\n" #: options.c:704 msgid " -B, --fetchlimit set fetch limit for server connections\n" msgstr " -B, --fetchlimit\t为服务器连接设置收取限制\n" #: options.c:705 msgid " --fetchsizelimit set fetch message size limit\n" msgstr " --fetchsizelimit\t设置收件大小限制\n" #: options.c:706 msgid " --fastuidl do a binary search for UIDLs\n" msgstr " --fastuidl\t对 UIDLs 进行折半查找\n" #: options.c:707 msgid " -e, --expunge set max deletions between expunges\n" msgstr " -e, --expunge\t设置删除操作发生在多少封邮件之后\n" #: options.c:708 msgid " -m, --mda set MDA to use for forwarding\n" msgstr " -m, --mda\t设置用于转发的 MDA\n" #: options.c:709 msgid " --bsmtp set output BSMTP file\n" msgstr " --bsmtp\t设置 BSMTP 文件输出\n" #: options.c:710 msgid " --lmtp use LMTP (RFC2033) for delivery\n" msgstr " --lmtp\t用 LMTP 协议(RFC2033) 投递邮件\n" #: options.c:711 msgid " -r, --folder specify remote folder name\n" msgstr " -r, --folder\t指定远程邮箱名\n" #: options.c:712 msgid " --showdots show progress dots even in logfiles\n" msgstr " --showdots\t即使在日志文件中也要显示进度条(以点的形式)\n" #: pop2.c:63 msgid "POP2 does not support STLS. Giving up.\n" msgstr "POP2 不支持 STLS。放弃操作。\n" #: pop2.c:69 msgid "POP2 only supports password authentication. Giving up.\n" msgstr "POP2 只支持密码验证。放弃操作。\n" #: pop3.c:335 msgid "Warning: \"Maillennium POP3\" found, using RETR command instead of TOP.\n" msgstr "警告: 发现\"Maillennium POP3\"，用 RETR 命令代替 TOP。\n" #: pop3.c:389 #, fuzzy #| msgid "TLS is mandatory for this session, but server refused CAPA command.\n" msgid "STLS is mandatory for this session, but server refused CAPA command.\n" msgstr "强制使用 TLS 会话，但服务器拒绝 CAPA 命令。\n" #: pop3.c:390 #, fuzzy #| msgid "The CAPA command is however necessary for TLS.\n" msgid "CAPA command support is, however, necessary for STLS.\n" msgstr "而 CPAC 命令对于 TLS 协议来说是必须要有的。\n" #: pop3.c:467 #, c-format msgid "%s: opportunistic upgrade to TLS failed, trying to continue.\n" msgstr "%s: 升级到 TLS 协议失败了，继续尝试。\n" #: pop3.c:473 #, c-format msgid "%s: WARNING: server offered STLS, but sslproto '' given.\n" msgstr "%s: 警告：服务器提供了 STLS，但给出了 sslproto ''。\n" #: pop3.c:641 msgid "We've run out of allowed authenticators and cannot continue.\n" msgstr "我们已经用完了可用的验证方式，无法继续\n" #: pop3.c:655 msgid "Required APOP timestamp not found in greeting\n" msgstr "在 greeting 中未发现所需的 APOP 时间戳\n" #: pop3.c:664 msgid "Timestamp syntax error in greeting\n" msgstr "greeting 中时间戳语法错误\n" #: pop3.c:680 msgid "Invalid APOP timestamp.\n" msgstr "无效的 APOP 时间戳\n" #: pop3.c:704 msgid "Undefined protocol request in POP3_auth\n" msgstr "POP3_auth 中有未定义的协议请求\n" #: pop3.c:725 msgid "lock busy! Is another session active?\n" msgstr "死锁！是否有另一个会话在运行？\n" #: pop3.c:788 msgid "Cannot handle UIDL response from upstream server.\n" msgstr "无法操作来自上游服务器的 UIDL 响应。\n" #: pop3.c:811 msgid "Server responded with UID for wrong message.\n" msgstr "响应的服务器带有错误消息的 UID。\n" #: pop3.c:840 #, c-format msgid "id=%s (num=%u) was deleted, but is still present!\n" msgstr "id=%s (数量=%u 封)已被删除，但仍然存在！\n" #: pop3.c:952 msgid "Messages inserted into list on server. Cannot handle this.\n" msgstr "邮件被插入服务器列表。无法处理。\n" #: pop3.c:1043 msgid "LAST is an obsolete command that many servers will not support. We will try modern means to find what messages are new.\n" msgstr "" #: pop3.c:1053 msgid "protocol error\n" msgstr "协议错\n" #: pop3.c:1069 msgid "protocol error while fetching UIDLs\n" msgstr "正在读取 UIDLs 时协议出错\n" #: pop3.c:1100 #, c-format msgid "id=%s (num=%d) was deleted, but is still present!\n" msgstr "id = %s (数量 = %d 封) 已被删除，但仍然存在！\n" #: pop3.c:1412 msgid "Option --folder is not supported with POP3\n" msgstr "POP3 不支持 --folder 选项\n" #: rcfile_y.y:50 msgid "end of input" msgstr "输入结束" #: rcfile_y.y:135 msgid "server option after user options" msgstr "服务器选项在用户选项后" #: rcfile_y.y:178 msgid "SDPS not enabled." msgstr "SDPS 不可用" #: rcfile_y.y:224 msgid "fetchmail: interface option is only supported under Linux (without IPv6) and FreeBSD\n" msgstr "fetchmail: interface 选项只有 Linux(无 IPv6)和 FreeBSD 支持\n" #: rcfile_y.y:232 msgid "fetchmail: monitor option is only supported under Linux (without IPv6) and FreeBSD\n" msgstr "fetchmail: monitor 选项只有 Linux(无 IPv6)和 FreeBSD 支持\n" #: rcfile_y.y:348 msgid "SSL is not enabled" msgstr "SSL 不可用" #: rcfile_y.y:424 #, c-format msgid "File %s must be a regular file.\n" msgstr "文件 %s 必须是个普通文件。\n" #: rcfile_y.y:430 #, c-format msgid "File %s must have no more than -rwx------ (0700) permissions.\n" msgstr "文件 %s 不允许拥有高于 -rwx------ (0700) 的权限。\n" #: rcfile_y.y:437 #, c-format msgid "File %s must be owned by you.\n" msgstr "文件 %s 必须归您所有。\n" #: rcfile_y.y:479 #, c-format msgid "%s: parsing rcfile %s: memory exhausted\n" msgstr "" #: regex_helper.c:16 #, c-format msgid "Internal error: match_regex could not compile pattern %s: %s\n" msgstr "" #: regex_helper.c:16 #, fuzzy #| msgid "Unknown system error" msgid "(unknown regcomp error)" msgstr "未知的系统错误" #: report.c:60 #, c-format msgid "%s (log message incomplete)\n" msgstr "%s (日志信息不完整)\n" #: rfc822.c:83 #, c-format msgid "About to rewrite %s...\n" msgstr "正要重写 %s...\n" #: rfc822.c:221 #, c-format msgid "...rewritten version is %s.\n" msgstr "...重写版本为 %s。\n" #: rpa.c:116 msgid "Success" msgstr "成功" #: rpa.c:117 msgid "Restricted user (something wrong with account)" msgstr "受限用户 (帐号有点问题)" #: rpa.c:118 msgid "Invalid userid or passphrase" msgstr "无效的用户 id 或是密码短语" #: rpa.c:119 msgid "Deity error" msgstr "Deity error" #: rpa.c:172 msgid "RPA token 2: Base64 decode error\n" msgstr "RPA 标识 2: BASE64 解码错误\n" #: rpa.c:183 #, c-format msgid "Service chose RPA version %d.%d\n" msgstr "服务选择了 RPA 版本 %d.%d\n" #: rpa.c:189 #, c-format msgid "Service challenge (l=%d):\n" msgstr "服务请求 (l=%d):\n" #: rpa.c:198 #, c-format msgid "Service timestamp %s\n" msgstr "服务时间戳 %s\n" #: rpa.c:203 msgid "RPA token 2 length error\n" msgstr "RPA 标识 2 长度错误\n" #: rpa.c:207 #, c-format msgid "Realm list: %s\n" msgstr "域列表: %s\n" #: rpa.c:211 msgid "RPA error in service@realm string\n" msgstr "在“服务@域”字符串中有 RPA 错误\n" #: rpa.c:248 msgid "RPA token 4: Base64 decode error\n" msgstr "RPA 标识 4: Base64 解码错误\n" #: rpa.c:259 #, c-format msgid "User authentication (l=%d):\n" msgstr "用户验证 (l=%d):\n" #: rpa.c:273 #, c-format msgid "RPA status: %02X\n" msgstr "RPA 状态: %02X\n" #: rpa.c:279 msgid "RPA token 4 length error\n" msgstr "RPA 标识 4 长度错误\n" #: rpa.c:286 #, c-format msgid "RPA rejects you: %s\n" msgstr "RPA 拒绝您: %s\n" #: rpa.c:288 msgid "RPA rejects you, reason unknown\n" msgstr "RPA 拒绝您: 原因不明\n" #: rpa.c:296 #, c-format msgid "RPA User Authentication length error: %d\n" msgstr "RPA 用户验证长度错误: %d\n" #: rpa.c:301 #, c-format msgid "RPA Session key length error: %d\n" msgstr "RPA 会话密钥长度错误: %d\n" #: rpa.c:307 msgid "RPA _service_ auth fail. Spoof server?\n" msgstr "RPA _service_auth 错误。要伪装服务器吗 ？\n" #: rpa.c:312 msgid "Session key established:\n" msgstr "创建会话密钥:\n" #: rpa.c:343 msgid "RPA authorisation complete\n" msgstr "RPA 授权完成\n" #: rpa.c:370 msgid "Get response\n" msgstr "得到响应\n" #: rpa.c:400 #, c-format msgid "Get response return %d [%s]\n" msgstr "得到响应返回 %d [%s]\n" #: rpa.c:461 msgid "Hdr not 60\n" msgstr "Hdr 非 60\n" #: rpa.c:482 msgid "Token length error\n" msgstr "标识长度错误\n" #: rpa.c:487 #, c-format msgid "Token Length %d disagrees with rxlen %d\n" msgstr "标识长度 %d 不同于 rxlen %d\n" #: rpa.c:493 msgid "Mechanism field incorrect\n" msgstr "机制域错误\n" #: rpa.c:529 #, c-format msgid "dec64 error at char %d: %x\n" msgstr "字符 %d 处有 deb64 错误: %x\n" #: rpa.c:544 msgid "Inbound binary data:\n" msgstr "收到的二进制数据:\n" #: rpa.c:580 msgid "Outbound data:\n" msgstr "送出数据:\n" #: rpa.c:643 msgid "RPA String too long\n" msgstr "RPA 字串太长\n" #: rpa.c:648 msgid "Unicode:\n" msgstr "Unicode:\n" #: rpa.c:707 msgid "RPA Failed open of /dev/urandom. This shouldn't\n" msgstr "打开 /dev/urandom 时 RPA 失败。这应该不\n" #: rpa.c:708 msgid " prevent you logging in, but means you\n" msgstr "影响您登入，但意味着您\n" #: rpa.c:709 msgid " cannot be sure you are talking to the\n" msgstr "无法确认您正在与\n" #: rpa.c:710 msgid " service that you think you are (replay\n" msgstr "您想要的服务对话。可能您正被一个虚假的服务\n" #: rpa.c:711 msgid " attacks by a dishonest service are possible.)\n" msgstr "进行回放操作，即受到攻击\n" #: rpa.c:722 msgid "User challenge:\n" msgstr "用户请求:\n" #: rpa.c:872 msgid "MD5 being applied to data block:\n" msgstr "数据块使用了 MD5:\n" #: rpa.c:885 msgid "MD5 result is:\n" msgstr "MD5 值:\n" #: servport.c:48 #, c-format msgid "getaddrinfo(NULL, \"%s\") error: %s\n" msgstr "getaddrinfo(NULL, “%s”) 错误: %s\n" #: servport.c:75 #, c-format msgid "Cannot resolve service %s to port number.\n" msgstr "无法将服务 %s 解析为端口号\n" #: servport.c:76 msgid "Please specify the service as decimal port number.\n" msgstr "请把服务指定为十进制的端口号\n" #: sink.c:221 #, c-format msgid "forwarding to %s\n" msgstr "正在转发至 %s\n" #: sink.c:309 msgid "SMTP: (bounce-message body)\n" msgstr "SMTP: (回送邮件内容)\n" #: sink.c:312 #, c-format msgid "mail from %s bounced to %s\n" msgstr "邮件从 %s 回送至 %s\n" #: sink.c:487 sink.c:580 #, c-format msgid "%cMTP error: %s\n" msgstr "%cMTP 出错: %s\n" #: sink.c:525 msgid "SMTP server requires STARTTLS, keeping message.\n" msgstr "SMTP 服务器需要 STARTTLS 认证，正在保存邮件。\n" #: sink.c:704 #, c-format msgid "BSMTP file open failed: %s\n" msgstr "打开 BSMTP 文件失败: %s\n" #: sink.c:750 #, c-format msgid "BSMTP preamble write failed: %s.\n" msgstr "写入 BSMTP 报头失败: %s。\n" #: sink.c:964 #, c-format msgid "%cMTP listener doesn't like recipient address `%s'\n" msgstr "%cMTP 端不认可收件人地址 “%s”\n" #: sink.c:971 #, c-format msgid "%cMTP listener doesn't really like recipient address `%s'\n" msgstr "%cMTP 端不是真的认可收件人地址 “%s”\n" #: sink.c:1017 msgid "no address matches; no postmaster set.\n" msgstr "无匹配的地址；也无 postmaster 设置\n" #: sink.c:1029 #, c-format msgid "can't even send to %s!\n" msgstr "无法稳定发送至 %s！\n" #: sink.c:1035 #, c-format msgid "no address matches; forwarding to %s.\n" msgstr "无匹配的地址；转发至 %s。\n" #: sink.c:1155 #, c-format msgid "MDA option contains single-quoted %%%c expansion.\n" msgstr "MDA 选项包含了单引号引用的 %%%c 展开。\n" #: sink.c:1156 msgid "Refusing to deliver. Check the manual and fix your mda option.\n" msgstr "拒绝递送。请检查使用手册并修复您的 mda 选项。\n" #: sink.c:1199 #, c-format msgid "about to deliver with: %s\n" msgstr "即将用 %s 投递\n" #: sink.c:1209 #, c-format msgid "Cannot switch effective user id to %ld: %s\n" msgstr "无法将当前用户名切换为 %ld: %s\n" #: sink.c:1219 #, c-format msgid "Cannot switch effective user id back to original %ld: %s\n" msgstr "无法将当前用户名切换回之前的用户名 %ld: %s\n" #: sink.c:1225 msgid "MDA open failed\n" msgstr "打开 MDA 失败\n" #: sink.c:1242 msgid "BSMTP" msgstr "" #: sink.c:1243 msgid "MDA" msgstr "MDA" #: sink.c:1245 msgid "LMTP" msgstr "" #: sink.c:1247 msgid "SMTP" msgstr "" #: sink.c:1248 msgid "sink" msgstr "" #: sink.c:1276 #, c-format msgid "%cMTP connect to %s failed\n" msgstr "%cMTP 连接至 %s 失败\n" #: sink.c:1336 #, c-format msgid "Message termination or close of BSMTP file failed: %s\n" msgstr "邮件终止或 BSMTP 文件关闭失败: %s\n" #: sink.c:1361 #, c-format msgid "Error writing to MDA: %s\n" msgstr "写入 MDA 时出错: %s\n" #: sink.c:1364 #, c-format msgid "MDA died of signal %d\n" msgstr "MDA 被信号 %d 终止\n" #: sink.c:1367 #, c-format msgid "MDA returned nonzero status %d\n" msgstr "MDA 返回非零值 %d\n" #: sink.c:1370 #, c-format msgid "Strange: MDA pclose returned %d and errno %d/%s, cannot handle at %s:%d\n" msgstr "奇怪: MDA pclose 返回 %d 且 errno 为 %d/%s，在 %s:%d 无法处理\n" #: sink.c:1395 msgid "SMTP listener refused delivery\n" msgstr "SMTP 端拒绝投递\n" #: sink.c:1425 msgid "LMTP delivery error on EOM\n" msgstr "邮件结尾时用 LTMP 协议投递错误\n" #: sink.c:1428 #, c-format msgid "Unexpected non-503 response to LMTP EOM: %s\n" msgstr "邮件结尾时 LMTP 协议的未知的非 503 响应: %s\n" #: sink.c:1581 msgid "The Fetchmail Daemon" msgstr "Fetchmail 后台服务" #: smtp.c:85 msgid "ESMTP CRAM-MD5 Authentication...\n" msgstr "ESMTP CRAM-MD5 验证...\n" #: smtp.c:91 smtp.c:144 msgid "Server rejected the AUTH command.\n" msgstr "服务器拒绝 AUTH 命令。\n" #: smtp.c:99 smtp.c:151 smtp.c:160 smtp.c:166 msgid "Bad base64 reply from server.\n" msgstr "来自服务器的错误的 base64 响应。\n" #: smtp.c:103 #, c-format msgid "Challenge decoded: %s\n" msgstr "请求解码: %s\n" #: smtp.c:120 msgid "ESMTP PLAIN Authentication...\n" msgstr "ESMTP PLAIN 验证...\n" #: smtp.c:138 msgid "ESMTP LOGIN Authentication...\n" msgstr "ESMTP LOGIN 验证...\n" #: smtp.c:355 smtp.c:383 msgid "smtp listener protocol error\n" msgstr "smtp 端协议错误\n" #: socket.c:115 msgid "fetchmail: malloc failed\n" msgstr "fetchmail: malloc 失败\n" #: socket.c:149 #, c-format msgid "fetchmail: plugin for host %s service %s is empty, cannot run!\n" msgstr "" #: socket.c:154 msgid "fetchmail: socketpair failed\n" msgstr "fetchmail: socketpair 失败\n" #: socket.c:162 msgid "fetchmail: fork failed\n" msgstr "fetchmail: fork 失败\n" #: socket.c:169 msgid "dup2 failed\n" msgstr "dup2 失败\n" #: socket.c:175 #, c-format msgid "running %s (host %s service %s)\n" msgstr "正在运行 %s (主机 %s 服务 %s)\n" #: socket.c:177 #, c-format msgid "execvp(%s) failed\n" msgstr "execvp(%s) 失败\n" #: socket.c:247 #, c-format msgid "getaddrinfo(\"%s\",\"%s\") error: %s\n" msgstr "getaddrinfo(“%s”，“%s”) 错误: %s\n" #: socket.c:250 msgid "Try adding the --service option (see also FAQ item R12).\n" msgstr "试着加入 --service 选项(参见 FAQ 条目 R12)。\n" #: socket.c:264 socket.c:267 #, c-format msgid "unknown (%s)" msgstr "未知 (%s)" #: socket.c:270 #, c-format msgid "Trying to connect to %s/%s..." msgstr "正在尝试连接至 %s/%s..." #: socket.c:279 #, c-format msgid "cannot create socket: %s\n" msgstr "无法创建套接字: %s\n" #: socket.c:281 #, c-format msgid "name %d: cannot create socket family %d type %d: %s\n" msgstr "名称 %d: 无法创建套接字 %d 类型 %d: %s\n" #: socket.c:299 msgid "connection failed.\n" msgstr "连接失败。\n" #: socket.c:300 #, c-format msgid "connection to %s:%s [%s/%s] failed: %s.\n" msgstr "连接至 %s:%s [%s/%s] 失败: %s。\n" #: socket.c:302 #, c-format msgid "name %d: connection to %s:%s [%s/%s] failed: %s.\n" msgstr "名称 %d: 连接至 %s:%s [%s/%s] 失败: %s。\n" #: socket.c:308 msgid "connected.\n" msgstr "已连接。\n" #: socket.c:321 #, c-format msgid "" "Connection errors for this poll:\n" "%s" msgstr "" "此服务器连接错误:\n" "%s" #: socket.c:421 #, fuzzy, c-format #| msgid "OpenSSL reported: %s\n" msgid "%s reported: %s\n" msgstr "OpenSSL 报告了：%s\n" #: socket.c:660 msgid "SSL verify callback error: current certificate NULL!\n" msgstr "" #: socket.c:671 #, fuzzy, c-format #| msgid "SSL verify callback depth %d: preverify_ok == %d, err = %d, %s\n" msgid "SSL verify callback depth %d: verify_ok == %d, err = %d, %s\n" msgstr "SSL 验证回调深度 %d: preverify_ok == %d, err = %d, %s\n" #: socket.c:677 msgid "Server certificate:\n" msgstr "服务器认证:\n" #: socket.c:682 #, c-format msgid "Certificate chain, from root to peer, starting at depth %d:\n" msgstr "验证链从根到节点，在 %d 开始:\n" #: socket.c:685 #, c-format msgid "Certificate at depth %d:\n" msgstr "验证处于 %d 层:\n" #: socket.c:691 #, c-format msgid "Issuer Organization: %s\n" msgstr "发行组织: %s\n" #: socket.c:694 msgid "Warning: Issuer Organization Name too long (possibly truncated).\n" msgstr "警告: 发行组织名字太长 (可能截短)。\n" #: socket.c:696 msgid "Unknown Organization\n" msgstr "未知的组织\n" #: socket.c:698 #, c-format msgid "Issuer CommonName: %s\n" msgstr "发行者: %s\n" #: socket.c:701 msgid "Warning: Issuer CommonName too long (possibly truncated).\n" msgstr "警告: 发行者名称太长 (可能截短)。\n" #: socket.c:703 msgid "Unknown Issuer CommonName\n" msgstr "未知的发行者名称\n" #: socket.c:709 #, c-format msgid "Subject CommonName: %s\n" msgstr "邮件标题: %s\n" #: socket.c:715 msgid "Bad certificate: Subject CommonName too long!\n" msgstr "证书错误: 邮件标题太长!\n" #: socket.c:721 msgid "Bad certificate: Subject CommonName contains NUL, aborting!\n" msgstr "证书错误: 邮件标题名中带有 NUL 字符，退出！\n" #: socket.c:749 #, c-format msgid "Subject Alternative Name: %s\n" msgstr "邮件标题别名: %s\n" #: socket.c:755 msgid "Bad certificate: Subject Alternative Name contains NUL, aborting!\n" msgstr "证书错误: 邮件标题别名带有 NUL 字符，退出！\n" #: socket.c:772 #, c-format msgid "Server CommonName mismatch: %s != %s\n" msgstr "服务器名不匹配: %s != %s\n" #: socket.c:779 msgid "Server name not set, could not verify certificate!\n" msgstr "未设置服务器名称，无法验证证书！\n" #: socket.c:784 msgid "Unknown Server CommonName\n" msgstr "未知的服务器名\n" #: socket.c:786 msgid "Server name not specified in certificate!\n" msgstr "服务器名称未在证书中指定！\n" #: socket.c:806 #, c-format msgid "Server certificate verification error: %s\n" msgstr "服务器证书验证错误：%s\n" #: socket.c:821 #, c-format msgid "Broken certification chain at: %s\n" msgstr "证书链错误，位于: %s\n" #: socket.c:823 msgid "This could mean that the server did not provide the intermediate CA's certificate(s), which is nothing fetchmail could do anything about. For details, please see the README.SSL-SERVER document that ships with fetchmail.\n" msgstr "这可能意味着服务器未提供中间 CA 证书，fetchmain 对此无能为力。详细信息请查看随同 fetchmail 发行的 README.SSL-SERVER 文档。\n" #: socket.c:833 #, c-format msgid "Missing trust anchor certificate: %s\n" msgstr "缺失信任锚（trust anchor）证书：%s\n" #: socket.c:836 msgid "This could mean that the root CA's signing certificate is not in the trusted CA certificate location, or that c_rehash needs to be run on the certificate directory. For details, please see the documentation of --sslcertpath and --sslcertfile in the manual page. See README.SSL for details.\n" msgstr "这意味着根证书不在 CA 证书受信路径处，或是需要在证书目录下运行 c_rehash。详细信息请查看手册页中的 --sslcertpath 和 --sslcertfile 部分。\n" #: socket.c:875 socket.c:892 #, c-format msgid "Cannot fetch digest implementation %s for sslfingerprint!\n" msgstr "" #: socket.c:905 #, fuzzy #| msgid "Out of memory!\n" msgid "X509_digest(): Out of memory!\n" msgstr "超出内存！\n" #: socket.c:917 msgid "Digest text buffer too small!\n" msgstr "Digest 文本缓冲区太小！\n" #: socket.c:923 socket.c:930 #, fuzzy, c-format #| msgid "%s key fingerprint: %s\n" msgid "%s fingerprint is: {%s}%s\n" msgstr "%s 密钥指纹: %s\n" #: socket.c:937 #, fuzzy, c-format #| msgid "%s fingerprints match.\n" msgid "%s fingerprint (%s) matches: %s\n" msgstr "%s 指纹匹配。\n" #: socket.c:941 #, fuzzy, c-format #| msgid "%s fingerprints do not match!\n" msgid "%s fingerprint ({%s}%s) does not match expected %s!\n" msgstr "%s 指纹不匹配！\n" #: socket.c:1046 #, c-format msgid "Invalid SSL protocol '%s' specified, using default autoselect (auto).\n" msgstr "指定了无效的 SSL 协议“%s”，将用默认的自动选择（auto）代替。\n" #: socket.c:1119 #, fuzzy, c-format #| msgid "Loaded OpenSSL library %#lx older than headers %#lx, refusing to work.\n" msgid "Loaded wolfSSL library %#lx older than headers %#lx, refusing to work.\n" msgstr "已加载的 OpenSSL 库 %#lx 比头文件 %#lx 更旧，拒绝工作。\n" #: socket.c:1125 #, c-format msgid "Loaded OpenSSL library %#lx older than headers %#lx, refusing to work.\n" msgstr "已加载的 OpenSSL 库 %#lx 比头文件 %#lx 更旧，拒绝工作。\n" #: socket.c:1130 #, c-format msgid "Loaded OpenSSL library %#lx newer than headers %#lx, trying to continue.\n" msgstr "已加载的 OpenSSL 库 %#lx 比头文件 %#lx 更新，尝试继续工作。\n" #: socket.c:1150 msgid "File descriptor out of range for SSL" msgstr "文件描述符超出 SSL 的范围" #: socket.c:1171 msgid "Note that some distributions disable older protocol versions in weird non-standard ways. Try a newer protocol version.\n" msgstr "请注意，某些发行版以非标准的方式禁用了较旧的协议版本。请尝试更新的协议版本。\n" #: socket.c:1184 #, c-format msgid "SSL/TLS <= 1.2: environment variable %s unset, using fetchmail built-in ciphers.\n" msgstr "" #: socket.c:1187 msgid "built-in defaults" msgstr "" #: socket.c:1192 #, c-format msgid "SSL/TLS <= 1.2: ciphers set from %s to \"%s\"\n" msgstr "" #: socket.c:1195 #, c-format msgid "SSL/TLS: <= 1.2 failed to set ciphers from %s to \"%s\"\n" msgstr "" #: socket.c:1208 #, c-format msgid "TLS >= 1.3: ciphersuite set from %s to \"%s\"\n" msgstr "" #: socket.c:1211 #, c-format msgid "TLS >= 1.3: failed to set ciphersuite from %s to \"%s\"\n" msgstr "" #: socket.c:1215 #, c-format msgid "TLS >= 1.3: environment variable %s unset, using OpenSSL built-in ciphersuites.\n" msgstr "" #: socket.c:1236 #, c-format msgid "The %s environment variable must contain a non-negative integer - parsing failed, using default level %d.\n" msgstr "" #: socket.c:1238 #, fuzzy, c-format #| msgid "Couldn't unwrap security level data\n" msgid "Parsed %s to set new security level %d\n" msgstr "无法解开加密数据\n" #: socket.c:1249 #, c-format msgid "DEBUG: SSL security level is %d\n" msgstr "" #: socket.c:1302 #, c-format msgid "Cannot load verify locations (file=\"%s\", dir=\"%s\"), error %d:\n" msgstr "" #: socket.c:1338 #, c-format msgid "Warning: SSL_set_tlsext_host_name(%p, \"%s\") failed (code %#lx), trying to continue.\n" msgstr "警告：SSL_set_tlsext_host_name(%p, \"%s\") 失败（代码 %#lx），尝试继续操作。\n" #: socket.c:1352 #, fuzzy, c-format #| msgid "Warning: SSL_set_tlsext_host_name(%p, \"%s\") failed (code %#lx), trying to continue.\n" msgid "fetchmail: sock %d: wolfSSL_check_domain_name(%p, \"%s\") returned %d, trying to continue\n" msgstr "警告：SSL_set_tlsext_host_name(%p, \"%s\") 失败（代码 %#lx），尝试继续操作。\n" #: socket.c:1367 #, c-format msgid "Warning: X509_VERIFY_PARAM_set1_host(%p, \"%s\") failed (code %#x), trying to continue.\n" msgstr "警告：X509_VERIFY_PARAM_set1_host(%p, \"%s\") 失败（代码 %#x），尝试继续操作。\n" #: socket.c:1422 msgid "Server shut down connection prematurely during SSL_connect().\n" msgstr "SSL_connect() 中服务器过早地关闭了链接。\n" #: socket.c:1453 socket.c:1459 #, c-format msgid "System error during SSL_connect(): %s\n" msgstr "SSL_connect() 中出现系统错误：%s\n" #: socket.c:1476 msgid "Cannot obtain current SSL/TLS cipher - no session established?\n" msgstr "无法获取当前的 SSL/TLS 加密算法——尚未建立会话？\n" #: socket.c:1486 msgid "Certificate/fingerprint verification was somehow skipped!\n" msgstr "证书/指纹验证被不明原因地跳过！\n" #: socket.c:1497 msgid "Warning: the connection is insecure, continuing anyways. (Better use --sslcertck!)\n" msgstr "警告:此连接不安全，但会继续运行。(最好使用 --sslcertck！)\n" #: transact.c:66 #, c-format msgid "mapped address %s to local %s\n" msgstr "地址 %s 被映射至本地 %s\n" #: transact.c:88 #, c-format msgid "mapped %s to local %s\n" msgstr "映射 %s 至本地 %s\n" #: transact.c:155 #, c-format msgid "passed through %s matching %s\n" msgstr "传送过来的 %s 正与 %s 进行比较\n" #: transact.c:227 #, c-format msgid "" "analyzing Received line:\n" "%s" msgstr "" "正在分析 Received 行:\n" "%s" #: transact.c:266 #, c-format msgid "line accepted, %s is an alias of the mailserver\n" msgstr "收到的行中 %s 是邮件服务器的一个昵称\n" #: transact.c:272 #, c-format msgid "line rejected, %s is not an alias of the mailserver\n" msgstr "拒收的行中 %s 非邮件服务器的昵称\n" #: transact.c:346 msgid "no Received address found\n" msgstr "找不到 Received 地址\n" #: transact.c:355 #, c-format msgid "found Received address `%s'\n" msgstr "找到 Received 地址 ‘%s’\n" #: transact.c:600 msgid "incorrect header line found - see manpage for bad-header option\n" msgstr "发现不正确的 header 行，查看手册页中的 bad-header 选项\n" #: transact.c:602 #, c-format msgid "line: %s" msgstr "行: %s" #: transact.c:1074 transact.c:1084 #, c-format msgid "Parsing envelope \"%s\" names \"%-.*s\"\n" msgstr "正在解析邮件\"%s\"，名称\"%-.*s\"\n" #: transact.c:1099 #, c-format msgid "Parsing Received names \"%-.*s\"\n" msgstr "正在解析 Received 信息\"%-.*s\"\n" #: transact.c:1111 msgid "No envelope recipient found, resorting to header guessing.\n" msgstr "未发现邮件接收人，采用猜测邮件头的方式。\n" #: transact.c:1129 #, c-format msgid "Guessing from header \"%-.*s\".\n" msgstr "正在从邮件头\"%-.*s\"猜测。\n" #: transact.c:1144 #, c-format msgid "no local matches, forwarding to %s\n" msgstr "无本地匹配的收件人，正在转发至 %s\n" #: transact.c:1159 msgid "forwarding and deletion suppressed due to DNS errors\n" msgstr "正在转发且由于 DNS 错误，删除被取消了\n" #: transact.c:1270 msgid "writing RFC822 msgblk.headers\n" msgstr "正在重写 RFC822 协议中定义的邮件信息块的头部\n" #: transact.c:1289 msgid "no recipient addresses matched declared local names" msgstr "收件人地址与本地已知的用户名不匹配" #: transact.c:1296 #, c-format msgid "recipient address %s didn't match any local name" msgstr "收到人地址 %s 与本地任何一个用户名均不匹配" #: transact.c:1305 msgid "message has embedded NULs" msgstr "邮件嵌入了 NULs" #: transact.c:1313 msgid "SMTP listener rejected local recipient addresses: " msgstr "SMTP 端拒绝本地收件人地址:" #: transact.c:1363 msgid "error writing message text\n" msgstr "在写邮件文本时出错\n" #: transact.c:1630 #, c-format msgid "Buffer too small. This is a bug in the caller of %s:%lu.\n" msgstr "" "缓冲区太小。这是 %s:%lu 调用的一个错误。\n" "\n" #: uid.c:259 #, c-format msgid "Open or read error while reading idfile %s: %s\n" msgstr "读取 idfile %s 时出现打开或读取错误：%s\n" #: uid.c:270 #, c-format msgid "Old UID list from %s:\n" msgstr "来自 %s 的旧 UID 列表:\n" #: uid.c:274 uid.c:283 uid.c:352 msgid " " msgstr " <空>" #: uid.c:281 msgid "Scratch list of UIDs:\n" msgstr "" #: uid.c:366 uid.c:410 #, c-format msgid "Merged UID list from %s:\n" msgstr "来自 %s 的已合并 UID 列表：\n" #: uid.c:369 #, c-format msgid "New UID list from %s:\n" msgstr "来自 %s 的新 UID 列表:\n" #: uid.c:399 msgid "not swapping UID lists, no UIDs seen this query\n" msgstr "不转储 UID 列表，本次查询无 UIDs 读取\n" #: uid.c:419 msgid "discarding new UID list\n" msgstr "正在撤消新的 UID 列表\n" #: uid.c:476 msgid "Deleting fetchids file.\n" msgstr "正在删除 fetchids 文件。\n" #: uid.c:479 #, c-format msgid "Error deleting %s: %s\n" msgstr "删除 %s 时出错: %s\n" #: uid.c:486 msgid "Writing fetchids file.\n" msgstr "正在写入 fetchids 文件。\n" #: uid.c:500 uid.c:509 #, c-format msgid "Write error on fetchids file %s: %s\n" msgstr "将错误写入 fetchids 文件 %s: %s\n" #: uid.c:521 #, c-format msgid "Error writing to fetchids file %s, old file left in place.\n" msgstr "写入 fetchids 文件 %s 时出错，存在旧文件。\n" #: uid.c:525 #, c-format msgid "Cannot rename fetchids file %s to %s: %s\n" msgstr "无法将 fetchids 文件 %s 重命名为 %s: %s\n" #: uid.c:529 #, c-format msgid "Cannot open fetchids file %s for writing: %s\n" msgstr "无法打开 fetchids 文件 %s 写入: %s\n" #: xmalloc.c:26 msgid "malloc failed\n" msgstr "malloc 失败\n" #: xmalloc.c:39 msgid "realloc failed\n" msgstr "realloc 失败\n" #~ msgid "WARNING: Your SSL/TLS library does not support TLS v1.3.\n" #~ msgstr "警告：您的 SSL/TLS 库不支持 TLS v1.3。\n" #~ msgid "WARNING: Compiled against LibreSSL, which is not a supported configuration.\n" #~ msgstr "警告：使用 LibreSSL 编译，该配置不受支持。\n" #~ msgid "Query status=0 (SUCCESS)\n" #~ msgstr "查询状态=0 (成功)\n" #~ msgid "Query status=1 (NOMAIL)\n" #~ msgstr "查询状态=1 (无邮件)\n" #~ msgid "Query status=2 (SOCKET)\n" #~ msgstr "查询状态=2 (套接字输入输出错误)\n" #~ msgid "Query status=3 (AUTHFAIL)\n" #~ msgstr "查询状态=3 (用户验证失败)\n" #~ msgid "Query status=4 (PROTOCOL)\n" #~ msgstr "查询状态=4 (协议无效)\n" #~ msgid "Query status=5 (SYNTAX)\n" #~ msgstr "查询状态=5 (命令行语法错误)\n" #~ msgid "Query status=6 (IOERR)\n" #~ msgstr "查询状态=6 (配置文件权限错误)\n" #~ msgid "Query status=7 (ERROR)\n" #~ msgstr "查询状态=7 (协议错误)\n" #~ msgid "Query status=8 (EXCLUDE)\n" #~ msgstr "查询状态=8 (客户端受到排斥)\n" #~ msgid "Query status=9 (LOCKBUSY)\n" #~ msgstr "查询状态=9 (服务器死锁)\n" #~ msgid "Query status=10 (SMTP)\n" #~ msgstr "查询状态=10 (SMTP 错误)\n" #~ msgid "Query status=11 (DNS)\n" #~ msgstr "查询状态=11 (DNS 错误)\n" #~ msgid "Query status=12 (BSMTP)\n" #~ msgstr "查询状态=12 (无法打开批量输出)\n" #~ msgid "Query status=13 (MAXFETCH)\n" #~ msgstr "查询状态=13 (到达收件上限)\n" #~ msgid " (default).\n" #~ msgstr " (默认)。\n" #~ msgid "ERROR: no support for getpassword() routine\n" #~ msgstr "错误: 不支持 getpassword() 例程\n" #, c-format #~ msgid "fetchmail: thread sleeping for %d sec.\n" #~ msgstr "fetchmail: 线程休眠 %d 秒。\n" #, c-format #~ msgid "can't raise the listener; falling back to %s" #~ msgstr "无法启动 MDA 代理；正在转到 MDA 代理 %s" #~ msgid "EVP_md5() failed!\n" #~ msgstr "EVP_md5() 失败！\n" #~ msgid "Your OpenSSL version does not support SSLv3.\n" #~ msgstr "您的 OpenSSL 版本不支持 SSLv3。\n" #~ msgid "Your OpenSSL version does not support TLS v1.1.\n" #~ msgstr "您的 OpenSSL 版本不支持 TLS v1.1。\n" #~ msgid "Your OpenSSL version does not support TLS v1.2.\n" #~ msgstr "您的 OpenSSL 版本不支持 TLS v1.2。\n" #~ msgid "Your OpenSSL version does not support TLS v1.3.\n" #~ msgstr "您的 OpenSSL 版本不支持 TLS v1.3。\n" #~ msgid "handshake failed at protocol or connection level." #~ msgstr "在协议层或连接层中握手失败。" #, c-format #~ msgid "SSL/TLS: using protocol %s, cipher %s, %d/%d secret/processed bits\n" #~ msgstr "SSL/TLS：使用协议 %s，算法 %s，%d/%d 加密/已处理比特\n" #~ msgid "Cygwin socket read retry\n" #~ msgstr "重试读取 Cygwin 接口\n" #~ msgid "Cygwin socket read retry failed!\n" #~ msgstr "重试读取 Cygwin 接口失败！\n" #~ msgid "Required LOGIN capability not supported by server\n" #~ msgstr "需要的 LOGIN 功能未被编译进 fetchmail\n" #~ msgid "Saved error is still %d\n" #~ msgstr "保留的错误仍然为 %d\n" #~ msgid "unknown issuer (first %d characters): %s\n" #~ msgstr "未知的发行者　(前 %d 个字符): %s\n" #~ msgid "swapping UID lists\n" #~ msgstr "正在转储 UID 列表\n" #~ msgid "fetchmail: Warning: syslog and logfile are set. Check both for logs!\n" #~ msgstr "fetchmail: 警告: 设置了 syslog 和 logfile。通过两者查看记录！\n" #~ msgid "Subject: Fetchmail unreachable-server warning." #~ msgstr "主题: Fetchmail 警告，找不到服务器。" #~ msgid "Fetchmail could not reach the mail server %s:" #~ msgstr "Fetchmail 不能找到邮件服务器 %s:" #~ msgid "(null)" #~ msgstr "(null)" #~ msgid "krb5_sendauth: %s [server says '%*s']\n" #~ msgstr "krb5_sendauth: %s [ 服务器响应 \"%*s\"]\n" #~ msgid "Server CommonName: %s\n" #~ msgstr "服务器名: %s\n"