# Simplified Chinese translation for gcc.
# Copyright (C) 2005 Free Software Foundation, Inc.
# This file is distributed under the same license as the gcc package.
# Meng Jie <zuxyhere@eastday.com>, 2005.
#
msgid ""
msgstr ""
"Project-Id-Version: gcc 4.2.2\n"
"Report-Msgid-Bugs-To: http://gcc.gnu.org/bugs.html\n"
"POT-Creation-Date: 2007-10-07 14:11-0700\n"
"PO-Revision-Date: 2007-10-12 13:58+0800\n"
"Last-Translator: Meng Jie <zuxy.meng@gmail.com>\n"
"Language-Team: Chinese (simplified) <translation-team-zh-cn@lists.sourceforge.net>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=utf-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Poedit-Language: Chinese\n"
"X-Poedit-Country: CHINA\n"
"X-Poedit-Basepath: C:\\MSYS\\source\\gcc-4.2.1\\gcc\n"

#: c-decl.c:3782
msgid "<anonymous>"
msgstr "< 匿名>"

#: c-format.c:346 c-format.c:370
msgid "' ' flag"
msgstr "‘ ’标记"

#: c-format.c:346 c-format.c:370
msgid "the ' ' printf flag"
msgstr "‘ ’printf 标记"

#: c-format.c:347 c-format.c:371 c-format.c:405 c-format.c:417 c-format.c:474
msgid "'+' flag"
msgstr "‘+’标记"

#: c-format.c:347 c-format.c:371 c-format.c:405 c-format.c:417
msgid "the '+' printf flag"
msgstr "‘+’printf 标记"

#: c-format.c:348 c-format.c:372 c-format.c:418 c-format.c:450
msgid "'#' flag"
msgstr "‘#’标记"

#: c-format.c:348 c-format.c:372 c-format.c:418
msgid "the '#' printf flag"
msgstr "‘#’printf 标记"

#: c-format.c:349 c-format.c:373 c-format.c:448
msgid "'0' flag"
msgstr "‘0’标记"

#: c-format.c:349 c-format.c:373
msgid "the '0' printf flag"
msgstr "‘0’printf 标记"

#: c-format.c:350 c-format.c:374 c-format.c:447 c-format.c:477
msgid "'-' flag"
msgstr "‘-’标记"

#: c-format.c:350 c-format.c:374
msgid "the '-' printf flag"
msgstr "‘-’printf 标记"

#: c-format.c:351 c-format.c:431
msgid "''' flag"
msgstr "‘'’标记"

#: c-format.c:351
msgid "the ''' printf flag"
msgstr "‘'’printf 标记"

#: c-format.c:352 c-format.c:432
msgid "'I' flag"
msgstr "‘I’标记"

#: c-format.c:352
msgid "the 'I' printf flag"
msgstr "‘I’printf 标记"

#: c-format.c:353 c-format.c:375 c-format.c:429 c-format.c:451 c-format.c:478
#: c-format.c:1605 config/sol2-c.c:45
msgid "field width"
msgstr "域宽"

#: c-format.c:353 c-format.c:375 config/sol2-c.c:45
msgid "field width in printf format"
msgstr "printf 格式的字段宽度"

#: c-format.c:354 c-format.c:376 c-format.c:407 c-format.c:420
msgid "precision"
msgstr "精度"

#: c-format.c:354 c-format.c:376 c-format.c:407 c-format.c:420
msgid "precision in printf format"
msgstr "printf 格式的精度"

#: c-format.c:355 c-format.c:377 c-format.c:408 c-format.c:421 c-format.c:430
#: c-format.c:481 config/sol2-c.c:46
msgid "length modifier"
msgstr "长度修饰符"

#: c-format.c:355 c-format.c:377 c-format.c:408 c-format.c:421
#: config/sol2-c.c:46
msgid "length modifier in printf format"
msgstr "printf 格式的长度修饰符"

#: c-format.c:406 c-format.c:419
msgid "'q' flag"
msgstr "‘q’标记"

#: c-format.c:406 c-format.c:419
msgid "the 'q' diagnostic flag"
msgstr "‘q’诊断标记"

#: c-format.c:427
msgid "assignment suppression"
msgstr "取消赋值"

#: c-format.c:427
msgid "the assignment suppression scanf feature"
msgstr "scanf 的取消赋值特性"

#: c-format.c:428
msgid "'a' flag"
msgstr "‘a’标记"

#: c-format.c:428
msgid "the 'a' scanf flag"
msgstr "‘a’scanf 标记"

#: c-format.c:429
msgid "field width in scanf format"
msgstr "scanf 格式的字段宽"

#: c-format.c:430
msgid "length modifier in scanf format"
msgstr "scanf 格式的长度修饰符"

#: c-format.c:431
msgid "the ''' scanf flag"
msgstr "‘'’scanf 标记"

#: c-format.c:432
msgid "the 'I' scanf flag"
msgstr "‘I’scanf 标记"

#: c-format.c:446
msgid "'_' flag"
msgstr "‘_’标记"

#: c-format.c:446
msgid "the '_' strftime flag"
msgstr "‘_’strftime 标记"

#: c-format.c:447
msgid "the '-' strftime flag"
msgstr "‘-’strftime 标记"

#: c-format.c:448
msgid "the '0' strftime flag"
msgstr "‘0’strftime 标记"

#: c-format.c:449 c-format.c:473
msgid "'^' flag"
msgstr "‘^’标记"

#: c-format.c:449
msgid "the '^' strftime flag"
msgstr "‘^’strftime 标记"

#: c-format.c:450
msgid "the '#' strftime flag"
msgstr "‘#’strftime 标记"

#: c-format.c:451
msgid "field width in strftime format"
msgstr "strftime 格式的字段宽度"

#: c-format.c:452
msgid "'E' modifier"
msgstr "‘E’修饰符"

#: c-format.c:452
msgid "the 'E' strftime modifier"
msgstr "‘E’strftime 修饰符"

#: c-format.c:453
msgid "'O' modifier"
msgstr "‘O’修饰符"

#: c-format.c:453
msgid "the 'O' strftime modifier"
msgstr "‘O’strftime 修饰符"

#: c-format.c:454
msgid "the 'O' modifier"
msgstr "‘O’修饰符"

#: c-format.c:472
msgid "fill character"
msgstr "填充字符"

#: c-format.c:472
msgid "fill character in strfmon format"
msgstr "strfmon 格式的填充字符"

#: c-format.c:473
msgid "the '^' strfmon flag"
msgstr "‘^’strfmon 标记"

#: c-format.c:474
msgid "the '+' strfmon flag"
msgstr "‘+’strfmon 标记"

#: c-format.c:475
msgid "'(' flag"
msgstr "‘(’标记"

#: c-format.c:475
msgid "the '(' strfmon flag"
msgstr "‘(’strfmon 标记"

#: c-format.c:476
msgid "'!' flag"
msgstr "‘!’标记"

#: c-format.c:476
msgid "the '!' strfmon flag"
msgstr "‘!’strfmon 标记"

#: c-format.c:477
msgid "the '-' strfmon flag"
msgstr "‘-’strfmon 标记"

#: c-format.c:478
msgid "field width in strfmon format"
msgstr "strfmon 格式的字段宽度"

#: c-format.c:479
msgid "left precision"
msgstr "左精度"

#: c-format.c:479
msgid "left precision in strfmon format"
msgstr "strfmon 格式的左精度"

#: c-format.c:480
msgid "right precision"
msgstr "右精度"

#: c-format.c:480
msgid "right precision in strfmon format"
msgstr "strfmon 格式的右精度"

#: c-format.c:481
msgid "length modifier in strfmon format"
msgstr "strfmon 格式的长度修饰符"

#: c-format.c:1707
msgid "field precision"
msgstr "字段精度"

#: c-incpath.c:73
#, c-format
msgid "ignoring duplicate directory \"%s\"\n"
msgstr "忽略重复的目录“%s”\n"

#: c-incpath.c:76
#, c-format
msgid "  as it is a non-system directory that duplicates a system directory\n"
msgstr "  因为它是一个重复了系统目录的非系统目录\n"

#: c-incpath.c:80
#, c-format
msgid "ignoring nonexistent directory \"%s\"\n"
msgstr "忽略不存在的目录“%s”\n"

#: c-incpath.c:295
#, c-format
msgid "#include \"...\" search starts here:\n"
msgstr "#include \"...\" 搜索从这里开始：\n"

#: c-incpath.c:299
#, c-format
msgid "#include <...> search starts here:\n"
msgstr "#include <...> 搜索从这里开始：\n"

#: c-incpath.c:304
#, c-format
msgid "End of search list.\n"
msgstr "搜索列表结束。\n"

#: c-opts.c:1377
msgid "<built-in>"
msgstr "<built-in>"

#: c-opts.c:1395
msgid "<command-line>"
msgstr "<命令行>"

#: c-typeck.c:2327 c-typeck.c:4763 c-typeck.c:4765 c-typeck.c:4773
#: c-typeck.c:4803 c-typeck.c:6179
msgid "initializer element is not constant"
msgstr "初始值设定元素不是常量"

#: c-typeck.c:4566
msgid "array initialized from parenthesized string constant"
msgstr "用括号中的字符串常量初始化数组"

#: c-typeck.c:4627 cp/typeck2.c:685
#, gcc-internal-format
msgid "char-array initialized from wide string"
msgstr "用宽字符串初始化 char 数组"

#: c-typeck.c:4632
msgid "wchar_t-array initialized from non-wide string"
msgstr "用窄字符串初始化 wchar_t 数组"

#: c-typeck.c:4650 cp/typeck2.c:705
#, gcc-internal-format
msgid "initializer-string for array of chars is too long"
msgstr "用以初始化字符数组的字符串太长"

#: c-typeck.c:4656
msgid "array of inappropriate type initialized from string constant"
msgstr "用字符串常量初始化的数组类型不合适"

#. ??? This should not be an error when inlining calls to
#. unprototyped functions.
#: c-typeck.c:4720 c-typeck.c:4215 cp/typeck.c:1529
#, gcc-internal-format
msgid "invalid use of non-lvalue array"
msgstr "对非左值数组的无效使用"

#: c-typeck.c:4746
msgid "array initialized from non-constant array expression"
msgstr "用非常量的数组表达式初始化数组"

#: c-typeck.c:4810 c-typeck.c:6183
#, gcc-internal-format
msgid "initializer element is not computable at load time"
msgstr "初始值设定中的元素在载入时无法被计算出"

#. Although C99 is unclear about whether incomplete arrays
#. of VLAs themselves count as VLAs, it does not make
#. sense to permit them to be initialized given that
#. ordinary VLAs may not be initialized.
#: c-typeck.c:4821 c-decl.c:3216 c-decl.c:3231
#, gcc-internal-format
msgid "variable-sized object may not be initialized"
msgstr "可变大小的对象不能被初始化"

#: c-typeck.c:4825
msgid "invalid initializer"
msgstr "无效的初始值设定"

#: c-typeck.c:5299
msgid "extra brace group at end of initializer"
msgstr "初始值设定项末尾有多余的花括号组"

#: c-typeck.c:5319
msgid "missing braces around initializer"
msgstr "初始值设定周围缺少花括号"

#: c-typeck.c:5380
msgid "braces around scalar initializer"
msgstr "标量初始化带花括号"

#: c-typeck.c:5437
msgid "initialization of flexible array member in a nested context"
msgstr "在嵌套的上下文中初始化变长数组成员"

#: c-typeck.c:5439
msgid "initialization of a flexible array member"
msgstr "对变长数组成员的初始化"

#: c-typeck.c:5466
msgid "missing initializer"
msgstr "缺少初始值设定"

#: c-typeck.c:5488
msgid "empty scalar initializer"
msgstr "空的标量初始值设定项"

#: c-typeck.c:5493
msgid "extra elements in scalar initializer"
msgstr "标量初始化设定中有多余元素"

#: c-typeck.c:5590 c-typeck.c:5650
msgid "array index in non-array initializer"
msgstr "在非数组初始值设定项中出现数组索引"

#: c-typeck.c:5595 c-typeck.c:5703
msgid "field name not in record or union initializer"
msgstr "字段名不在记录或联合初始化设定中"

#: c-typeck.c:5641
msgid "array index in initializer not of integer type"
msgstr "初始值设定中数组索引不是整型"

#: c-typeck.c:5646 c-typeck.c:5648
msgid "nonconstant array index in initializer"
msgstr "初始值设定中数组索引不是常数"

#: c-typeck.c:5652 c-typeck.c:5655
msgid "array index in initializer exceeds array bounds"
msgstr "初始化时数组索引越界"

#: c-typeck.c:5666
msgid "empty index range in initializer"
msgstr "初始值设定项中索引范围为空"

#: c-typeck.c:5675
msgid "array index range in initializer exceeds array bounds"
msgstr "初始值设定中数据索引范围超出数组边界"

#: c-typeck.c:5750 c-typeck.c:5773 c-typeck.c:6247
msgid "initialized field with side-effects overwritten"
msgstr "带副作用的字段初始化设定被覆盖"

#: c-typeck.c:5752 c-typeck.c:5775 c-typeck.c:6249
msgid "initialized field overwritten"
msgstr "已初始化的字段被覆盖"

#: c-typeck.c:6457
msgid "excess elements in char array initializer"
msgstr "字符数组初始值设定项中有多余元素"

#: c-typeck.c:6464 c-typeck.c:6510
msgid "excess elements in struct initializer"
msgstr "结构初始值设定项中有多余元素"

#: c-typeck.c:6525
msgid "non-static initialization of a flexible array member"
msgstr "对变长数组成员非静态地初始化"

#: c-typeck.c:6593
msgid "excess elements in union initializer"
msgstr "联合初始值设定项中有多余元素"

#: c-typeck.c:6680
msgid "excess elements in array initializer"
msgstr "数组初始值设定项中有多余的元素"

#: c-typeck.c:6710
msgid "excess elements in vector initializer"
msgstr "矢量初始值设定项中有多余元素"

#: c-typeck.c:6734
msgid "excess elements in scalar initializer"
msgstr "标量初始值设定项中有多余元素"

#: cfgrtl.c:1969
msgid "flow control insn inside a basic block"
msgstr "基本块内有流程控制指令"

#: cfgrtl.c:2047
msgid "wrong insn in the fallthru edge"
msgstr "直通边上的错误指令"

#: cfgrtl.c:2089
msgid "insn outside basic block"
msgstr "基本块外出现指令"

#: cfgrtl.c:2096
msgid "return not followed by barrier"
msgstr "return 后没有屏障"

#: cgraph.c:390 ipa-inline.c:312
msgid "function body not available"
msgstr "函数体不可用"

#: cgraph.c:392 cgraphunit.c:632
msgid "redefined extern inline functions are not considered for inlining"
msgstr "不考虑内联重定义的外部内联函数"

#: cgraph.c:395 cgraphunit.c:637
msgid "function not considered for inlining"
msgstr "不考虑内联函数"

#: cgraph.c:397 cgraphunit.c:635 ipa-inline.c:305
msgid "function not inlinable"
msgstr "函数不能内联"

#: collect2.c:372 gcc.c:6832
#, c-format
msgid "internal gcc abort in %s, at %s:%d"
msgstr "gcc 内部放弃 %s，于 %s:%d"

#: collect2.c:871
#, c-format
msgid "no arguments"
msgstr "没有参数"

#: collect2.c:1245 collect2.c:1393 collect2.c:1428
#, c-format
msgid "fopen %s"
msgstr "fopen %s"

#: collect2.c:1248 collect2.c:1398 collect2.c:1431
#, c-format
msgid "fclose %s"
msgstr "fclose %s"

#: collect2.c:1257
#, c-format
msgid "collect2 version %s"
msgstr "collect2 版本 %s"

#: collect2.c:1347
#, c-format
msgid "%d constructor(s) found\n"
msgstr "找到 %d 个构造函数\n"

#: collect2.c:1348
#, c-format
msgid "%d destructor(s)  found\n"
msgstr "找到 %d 个析构函数\n"

#: collect2.c:1349
#, c-format
msgid "%d frame table(s) found\n"
msgstr "找到了 %d 个框架表\n"

#: collect2.c:1486
#, c-format
msgid "can't get program status"
msgstr "无法获取程序状态"

#: collect2.c:1536
#, c-format
msgid "[cannot find %s]"
msgstr "[找不到 %s]"

#: collect2.c:1551
#, c-format
msgid "cannot find '%s'"
msgstr "找不到‘%s’"

#: collect2.c:1555 collect2.c:2044 collect2.c:2199 gcc.c:2927
#, c-format
msgid "pex_init failed"
msgstr "pex_init 失败"

#: collect2.c:1590
#, c-format
msgid "[Leaving %s]\n"
msgstr "[离开 %s]\n"

#: collect2.c:1810
#, c-format
msgid ""
"\n"
"write_c_file - output name is %s, prefix is %s\n"
msgstr ""
"\n"
"write_c_file - 输出名为 %s，前缀为 %s\n"

#: collect2.c:2018
#, c-format
msgid "cannot find 'nm'"
msgstr "找不到 ‘nm’"

#: collect2.c:2065
#, c-format
msgid "can't open nm output"
msgstr "无法打开 nm 的输出"

#: collect2.c:2109
#, c-format
msgid "init function found in object %s"
msgstr "在对象 %s 中发现 init 函数"

#: collect2.c:2117
#, c-format
msgid "fini function found in object %s"
msgstr "在对象 %s 中发现 fini 函数"

#: collect2.c:2220
#, c-format
msgid "can't open ldd output"
msgstr "无法打开 ldd 输出"

#: collect2.c:2223
#, c-format
msgid ""
"\n"
"ldd output with constructors/destructors.\n"
msgstr ""
"\n"
"ldd 输出带有构造/析构函数。\n"

#: collect2.c:2238
#, c-format
msgid "dynamic dependency %s not found"
msgstr "找不到动态依赖项 %s"

#: collect2.c:2250
#, c-format
msgid "unable to open dynamic dependency '%s'"
msgstr "无法打开动态依赖项‘%s’"

#: collect2.c:2406
#, c-format
msgid "%s: not a COFF file"
msgstr "%s：不是一个 COFF 文件"

#: collect2.c:2526
#, c-format
msgid "%s: cannot open as COFF file"
msgstr "%s：不能打开 COFF 文件"

#: collect2.c:2584
#, c-format
msgid "library lib%s not found"
msgstr "找不到库 lib%s"

#: cppspec.c:105
#, c-format
msgid "\"%s\" is not a valid option to the preprocessor"
msgstr "“%s”不是预处理器的有效选项"

#: cppspec.c:127
#, c-format
msgid "too many input files"
msgstr "输入文件太多"

#: diagnostic.c:188
#, c-format
msgid "%s:%d: confused by earlier errors, bailing out\n"
msgstr "%s：%d：不能从先前的错误中恢复，退出\n"

#: diagnostic.c:253
#, c-format
msgid "compilation terminated due to -Wfatal-errors.\n"
msgstr "编译因为 -Wfatal-errors 而中止。\n"

#: diagnostic.c:262
#, c-format
msgid ""
"Please submit a full bug report,\n"
"with preprocessed source if appropriate.\n"
"See %s for instructions.\n"
msgstr ""
"请提交一份完整的错误报告，\n"
"如有可能请附上经预处理后的源文件。\n"
"具体步骤请参见 %s。\n"

#: diagnostic.c:271
#, c-format
msgid "compilation terminated.\n"
msgstr "编译中断。\n"

#: diagnostic.c:622
#, c-format
msgid "Internal compiler error: Error reporting routines re-entered.\n"
msgstr "内部编译器错误：重入错误报告程序。\n"

#: final.c:1103
msgid "negative insn length"
msgstr "指令长度为负"

#: final.c:2448
msgid "could not split insn"
msgstr "无法分离指令"

#: final.c:2797
msgid "invalid 'asm': "
msgstr "无效的‘asm’："

#: final.c:2980
#, c-format
msgid "nested assembly dialect alternatives"
msgstr "嵌套的汇编风格指示"

#: final.c:2997 final.c:3009
#, c-format
msgid "unterminated assembly dialect alternative"
msgstr "未结束的汇编风格指示"

#: final.c:3056
#, c-format
msgid "operand number missing after %%-letter"
msgstr "%% 字母后缺少操作数号"

#: final.c:3059 final.c:3100
#, c-format
msgid "operand number out of range"
msgstr "操作数号超出范围"

#: final.c:3119
#, c-format
msgid "invalid %%-code"
msgstr "无效的 %%-code"

#: final.c:3149
#, c-format
msgid "'%%l' operand isn't a label"
msgstr "‘%%l’操作数不是一个标号"

#. We can't handle floating point constants;
#. PRINT_OPERAND must handle them.
#. We can't handle floating point constants; PRINT_OPERAND must
#. handle them.
#. We can't handle floating point constants;
#. PRINT_OPERAND must handle them.
#: final.c:3250 vmsdbgout.c:487 config/i386/i386.c:7221
#: config/pdp11/pdp11.c:1699
#, c-format
msgid "floating constant misused"
msgstr "错误地使用了浮点常量"

#: final.c:3306 vmsdbgout.c:544 config/i386/i386.c:7297
#: config/pdp11/pdp11.c:1746
#, c-format
msgid "invalid expression as operand"
msgstr "无效的表达式用作操作数"

#: flow.c:1734
msgid "Attempt to delete prologue/epilogue insn:"
msgstr "试图删除前言/尾声指令："

#: gcc.c:1664
#, c-format
msgid "Using built-in specs.\n"
msgstr "使用内建 specs。\n"

#: gcc.c:1847
#, c-format
msgid ""
"Setting spec %s to '%s'\n"
"\n"
msgstr ""
"将 spec %s 设为‘%s’\n"
"\n"

#: gcc.c:1962
#, c-format
msgid "Reading specs from %s\n"
msgstr "从 %s 读取 specs\n"

#: gcc.c:2058 gcc.c:2077
#, c-format
msgid "specs %%include syntax malformed after %ld characters"
msgstr "specs %%include 在 %ld 字符后语法格式错误"

#: gcc.c:2085
#, c-format
msgid "could not find specs file %s\n"
msgstr "找不到 specs 文件 %s\n"

#: gcc.c:2102 gcc.c:2110 gcc.c:2119 gcc.c:2128
#, c-format
msgid "specs %%rename syntax malformed after %ld characters"
msgstr "specs %%rename 在 %ld 字符后语法格式错误"

#: gcc.c:2137
#, c-format
msgid "specs %s spec was not found to be renamed"
msgstr "specs 找不到 %s spec 或已被重命名"

#: gcc.c:2144
#, c-format
msgid "%s: attempt to rename spec '%s' to already defined spec '%s'"
msgstr "%s：试图将 spec‘%s’重命名为已定义的 spec‘%s’"

#: gcc.c:2149
#, c-format
msgid "rename spec %s to %s\n"
msgstr "将 spec %s 重命名为 %s\n"

#: gcc.c:2151
#, c-format
msgid ""
"spec is '%s'\n"
"\n"
msgstr ""
"spec 是‘%s’\n"
"\n"

#: gcc.c:2164
#, c-format
msgid "specs unknown %% command after %ld characters"
msgstr "specs 在 %ld 字符后出现未知的 %% 命令"

#: gcc.c:2175 gcc.c:2188
#, c-format
msgid "specs file malformed after %ld characters"
msgstr "specs 在 %ld 字符后文件格式错误"

#: gcc.c:2241
#, c-format
msgid "spec file has no spec for linking"
msgstr "spec 文件没有对链接的设定"

#: gcc.c:2758
#, c-format
msgid "system path '%s' is not absolute"
msgstr "系统路径‘%s’不是绝对路径"

#: gcc.c:2821
#, c-format
msgid "-pipe not supported"
msgstr "不支持 -pipe"

#: gcc.c:2883
#, c-format
msgid ""
"\n"
"Go ahead? (y or n) "
msgstr ""
"\n"
"继续？(y 或 n) "

#: gcc.c:2966
msgid "failed to get exit status"
msgstr "无法获取退出状态"

#: gcc.c:2972
msgid "failed to get process times"
msgstr "无法获取进程时间"

#: gcc.c:2998
#, c-format
msgid ""
"Internal error: %s (program %s)\n"
"Please submit a full bug report.\n"
"See %s for instructions."
msgstr ""
"内部错误：%s (程序 %s)\n"
"请提交一份完整的错误报告。\n"
"具体步骤请参见 %s。"

#: gcc.c:3024
#, c-format
msgid "# %s %.2f %.2f\n"
msgstr "# %s %.2f %.2f\n"

#: gcc.c:3160
#, c-format
msgid "Usage: %s [options] file...\n"
msgstr "用法：%s [选项] 文件...\n"

#: gcc.c:3161
msgid "Options:\n"
msgstr "选项：\n"

#: gcc.c:3163
msgid "  -pass-exit-codes         Exit with highest error code from a phase\n"
msgstr "  -pass-exit-codes         在某一阶段退出时返回最高的错误码\n"

#: gcc.c:3164
msgid "  --help                   Display this information\n"
msgstr "  --help                   显示此帮助说明\n"

#: gcc.c:3165
msgid "  --target-help            Display target specific command line options\n"
msgstr "  --target-help            显示目标机器特定的命令行选项\n"

#: gcc.c:3167
msgid "  (Use '-v --help' to display command line options of sub-processes)\n"
msgstr "  (使用‘-v --help’显示子进程的命令行参数)\n"

#: gcc.c:3168
msgid "  -dumpspecs               Display all of the built in spec strings\n"
msgstr "  -dumpspecs               显示所有内建 spec 字符串\n"

#: gcc.c:3169
msgid "  -dumpversion             Display the version of the compiler\n"
msgstr "  -dumpversion             显示编译器的版本号\n"

#: gcc.c:3170
msgid "  -dumpmachine             Display the compiler's target processor\n"
msgstr "  -dumpmachine             显示编译器的目标处理器\n"

#: gcc.c:3171
msgid "  -print-search-dirs       Display the directories in the compiler's search path\n"
msgstr "  -print-search-dirs       显示编译器的搜索路径\n"

#: gcc.c:3172
msgid "  -print-libgcc-file-name  Display the name of the compiler's companion library\n"
msgstr "  -print-libgcc-file-name  显示编译器伴随库的名称\n"

#: gcc.c:3173
msgid "  -print-file-name=<lib>   Display the full path to library <lib>\n"
msgstr "  -print-file-name=<库>    显示 <库> 的完整路径\n"

#: gcc.c:3174
msgid "  -print-prog-name=<prog>  Display the full path to compiler component <prog>\n"
msgstr "  -print-prog-name=<程序>  显示编译器组件 <程序> 的完整路径\n"

#: gcc.c:3175
msgid "  -print-multi-directory   Display the root directory for versions of libgcc\n"
msgstr "  -print-multi-directory   显示不同版本 libgcc 的根目录\n"

#: gcc.c:3176
msgid ""
"  -print-multi-lib         Display the mapping between command line options and\n"
"                           multiple library search directories\n"
msgstr "  -print-multi-lib         显示命令行选项和多个版本库搜索路径间的映射\n"

#: gcc.c:3179
msgid "  -print-multi-os-directory Display the relative path to OS libraries\n"
msgstr "  -print-multi-os-directory 显示操作系统库的相对路径\n"

#: gcc.c:3180
msgid "  -Wa,<options>            Pass comma-separated <options> on to the assembler\n"
msgstr "  -Wa,<选项>               将逗号分隔的 <选项> 传递给汇编器\n"

#: gcc.c:3181
msgid "  -Wp,<options>            Pass comma-separated <options> on to the preprocessor\n"
msgstr "  -Wp,<选项>               将逗号分隔的 <选项> 传递给预处理器\n"

#: gcc.c:3182
msgid "  -Wl,<options>            Pass comma-separated <options> on to the linker\n"
msgstr "  -Wl,<选项>               将逗号分隔的 <选项> 传递给链接器\n"

#: gcc.c:3183
msgid "  -Xassembler <arg>        Pass <arg> on to the assembler\n"
msgstr "  -Xassembler <参数>       将 <参数> 传递给汇编器\n"

#: gcc.c:3184
msgid "  -Xpreprocessor <arg>     Pass <arg> on to the preprocessor\n"
msgstr "  -Xpreprocessor <参数>    将 <参数> 传递给预处理器\n"

#: gcc.c:3185
msgid "  -Xlinker <arg>           Pass <arg> on to the linker\n"
msgstr "  -Xlinker <参数>          将 <参数> 传递给链接器\n"

#: gcc.c:3186
msgid "  -combine                 Pass multiple source files to compiler at once\n"
msgstr "  -combine                 将多个源文件一次性传递给汇编器\n"

#: gcc.c:3187
msgid "  -save-temps              Do not delete intermediate files\n"
msgstr "  -save-temps              不删除中间文件\n"

#: gcc.c:3188
msgid "  -pipe                    Use pipes rather than intermediate files\n"
msgstr "  -pipe                    使用管道代替临时文件\n"

#: gcc.c:3189
msgid "  -time                    Time the execution of each subprocess\n"
msgstr "  -time                    为每个子进程计时\n"

#: gcc.c:3190
msgid "  -specs=<file>            Override built-in specs with the contents of <file>\n"
msgstr "  -specs=<文件>            用 <文件> 的内容覆盖内建的 specs 文件\n"

#: gcc.c:3191
msgid "  -std=<standard>          Assume that the input sources are for <standard>\n"
msgstr "  -std=<标准>              指定输入源文件遵循的标准\n"

#: gcc.c:3192
msgid ""
"  --sysroot=<directory>    Use <directory> as the root directory for headers\n"
"                           and libraries\n"
msgstr "  --sysroot=<目录>         将 <目录> 作为头文件和库文件的根目录\n"

#: gcc.c:3195
msgid "  -B <directory>           Add <directory> to the compiler's search paths\n"
msgstr "  -B <目录>                将 <目录> 添加到编译器的搜索路径中\n"

#: gcc.c:3196
msgid "  -b <machine>             Run gcc for target <machine>, if installed\n"
msgstr "  -b <机器>                为 gcc 指定目标机器(如果有安装)\n"

#: gcc.c:3197
msgid "  -V <version>             Run gcc version number <version>, if installed\n"
msgstr "  -V <版本>                运行指定版本的 gcc(如果有安装)\n"

#: gcc.c:3198
msgid "  -v                       Display the programs invoked by the compiler\n"
msgstr "  -v                       显示编译器调用的程序\n"

#: gcc.c:3199
msgid "  -###                     Like -v but options quoted and commands not executed\n"
msgstr "  -###                     与 -v 类似，但选项被引号括住，并且不执行命令\n"

#: gcc.c:3200
msgid "  -E                       Preprocess only; do not compile, assemble or link\n"
msgstr "  -E                       仅作预处理，不进行编译、汇编和链接\n"

#: gcc.c:3201
msgid "  -S                       Compile only; do not assemble or link\n"
msgstr "  -S                       编译到汇编语言，不进行汇编和链接\n"

#: gcc.c:3202
msgid "  -c                       Compile and assemble, but do not link\n"
msgstr "  -c                       编译、汇编到目标代码，不进行链接\n"

#: gcc.c:3203
msgid "  -o <file>                Place the output into <file>\n"
msgstr "  -o <文件>                输出到 <文件>\n"

#: gcc.c:3204
msgid ""
"  -x <language>            Specify the language of the following input files\n"
"                           Permissible languages include: c c++ assembler none\n"
"                           'none' means revert to the default behavior of\n"
"                           guessing the language based on the file's extension\n"
msgstr ""
"  -x <语言>                指定其后输入文件的语言\n"
"                           允许的语言包括：c c++ assembler none\n"
"                           ‘none’意味着恢复默认行为，即根据文件的扩展名猜测\n"
"                           源文件的语言\n"

#: gcc.c:3211
#, c-format
msgid ""
"\n"
"Options starting with -g, -f, -m, -O, -W, or --param are automatically\n"
" passed on to the various sub-processes invoked by %s.  In order to pass\n"
" other options on to these processes the -W<letter> options must be used.\n"
msgstr ""
"\n"
"以 -g、-f、-m、-O、-W 或 --param 开头的选项将由 %s 自动传递给其调用的\n"
" 不同子进程。若要向这些进程传递其他选项，必须使用 -W<字母> 选项。\n"

#: gcc.c:3334
#, c-format
msgid "'-%c' option must have argument"
msgstr "‘-%c’选项必须有一个参数"

#: gcc.c:3356
#, c-format
msgid "couldn't run '%s': %s"
msgstr "无法运行‘%s’：%s"

#. translate_options () has turned --version into -fversion.
#: gcc.c:3549
#, c-format
msgid "%s (GCC) %s\n"
msgstr "%s (GCC) %s\n"

#: gcc.c:3551 gcov.c:418 fortran/gfortranspec.c:349 java/gjavah.c:2405
#: java/jcf-dump.c:935 java/jv-scan.c:128
msgid "(C)"
msgstr "(C)"

#: gcc.c:3552 java/gjavah.c:2406 java/jcf-dump.c:936 java/jv-scan.c:129
#, c-format
msgid ""
"This is free software; see the source for copying conditions.  There is NO\n"
"warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.\n"
"\n"
msgstr ""
"本程序是自由软件；请参看源代码的版权声明。本软件没有任何担保；\n"
"包括没有适销性和某一专用目的下的适用性担保。\n"

#: gcc.c:3653
#, c-format
msgid "argument to '-Xlinker' is missing"
msgstr "‘-Xlinker’缺少实参"

#: gcc.c:3661
#, c-format
msgid "argument to '-Xpreprocessor' is missing"
msgstr "‘-Xpreprocessor’缺少实参"

#: gcc.c:3668
#, c-format
msgid "argument to '-Xassembler' is missing"
msgstr "‘-Xassembler’缺少实参"

#: gcc.c:3675
#, c-format
msgid "argument to '-l' is missing"
msgstr "‘-l’缺少实参"

#: gcc.c:3696
#, c-format
msgid "argument to '-specs' is missing"
msgstr "‘-specs’缺少实参"

#: gcc.c:3710
#, c-format
msgid "argument to '-specs=' is missing"
msgstr "‘-Xlinker’缺少实参"

#: gcc.c:3751
#, c-format
msgid "'-%c' must come at the start of the command line"
msgstr "‘-%c’必须出现在命令行的开头"

#: gcc.c:3760
#, c-format
msgid "argument to '-B' is missing"
msgstr "‘-B’缺少实参"

#: gcc.c:4146
#, c-format
msgid "argument to '-x' is missing"
msgstr "‘-x’缺少实参"

#: gcc.c:4174
#, c-format
msgid "argument to '-%s' is missing"
msgstr "‘-%s’缺少实参"

#: gcc.c:4512
#, c-format
msgid "switch '%s' does not start with '-'"
msgstr "开关‘%s’未以‘-’开头"

#: gcc.c:4689
#, c-format
msgid "spec '%s' invalid"
msgstr "spec‘%s’无效"

#: gcc.c:4755
#, c-format
msgid "%s\n"
msgstr "%s\n"

#: gcc.c:4828
#, c-format
msgid "spec '%s' has invalid '%%0%c'"
msgstr "spec‘%s’有无效的‘%%0%c’"

#: gcc.c:5039
#, c-format
msgid "spec '%s' has invalid '%%W%c"
msgstr "spec‘%s’有无效的‘%%W%c’"

#: gcc.c:5070
#, c-format
msgid "spec '%s' has invalid '%%x%c'"
msgstr "spec‘%s’有无效的‘%%x%c’"

#: gcc.c:5292
#, c-format
msgid "Processing spec %c%s%c, which is '%s'\n"
msgstr "处理 spec %c%s%c，即‘%s’\n"

#: gcc.c:5425
#, c-format
msgid "unknown spec function '%s'"
msgstr "未知的 spec 函数‘%s’"

#: gcc.c:5444
#, c-format
msgid "error in args to spec function '%s'"
msgstr "给 spec 函数‘%s’的参数有错"

#: gcc.c:5492
#, c-format
msgid "malformed spec function name"
msgstr "spec 函数名格式错误"

#. )
#: gcc.c:5495
#, c-format
msgid "no arguments for spec function"
msgstr "spec 函数没有实参"

#: gcc.c:5514
#, c-format
msgid "malformed spec function arguments"
msgstr "spec 函数实参格式错误"

#: gcc.c:5753
#, c-format
msgid "braced spec '%s' is invalid at '%c'"
msgstr "花括号中的 spec‘%s’在‘%c’中无效"

#: gcc.c:5841
#, c-format
msgid "braced spec body '%s' is invalid"
msgstr "花括号中的 spec 体‘%s’无效"

#: gcc.c:6371
#, c-format
msgid "install: %s%s\n"
msgstr "安装：%s%s\n"

#: gcc.c:6372
#, c-format
msgid "programs: %s\n"
msgstr "程序：%s\n"

#: gcc.c:6374
#, c-format
msgid "libraries: %s\n"
msgstr "库：%s\n"

#: gcc.c:6432
#, c-format
msgid ""
"\n"
"For bug reporting instructions, please see:\n"
msgstr ""
"\n"
"报告程序缺陷的步骤请参见：\n"

#: gcc.c:6448
#, c-format
msgid "Target: %s\n"
msgstr "目标：%s\n"

#: gcc.c:6449
#, c-format
msgid "Configured with: %s\n"
msgstr "配置为：%s\n"

#: gcc.c:6463
#, c-format
msgid "Thread model: %s\n"
msgstr "线程模型：%s\n"

#: gcc.c:6474
#, c-format
msgid "gcc version %s\n"
msgstr "gcc 版本 %s\n"

#: gcc.c:6476
#, c-format
msgid "gcc driver version %s executing gcc version %s\n"
msgstr "版本为 %s 的 gcc 驱动程序，执行版本为 %s 的 gcc\n"

#: gcc.c:6484
#, c-format
msgid "no input files"
msgstr "没有输入文件"

#: gcc.c:6533
#, c-format
msgid "cannot specify -o with -c or -S with multiple files"
msgstr "当有多个文件时不能在已指定 -c 或 -S 的情况下指定 -o"

#: gcc.c:6567
#, c-format
msgid "spec '%s' is invalid"
msgstr "spec‘%s’是无效的"

#: gcc.c:7047
#, c-format
msgid "multilib spec '%s' is invalid"
msgstr "multilib spec‘%s’无效"

#: gcc.c:7238
#, c-format
msgid "multilib exclusions '%s' is invalid"
msgstr "multilib 排除‘%s’无效"

#: gcc.c:7296 gcc.c:7437
#, c-format
msgid "multilib select '%s' is invalid"
msgstr "multilib 选择‘%s’无效"

#: gcc.c:7475
#, c-format
msgid "multilib exclusion '%s' is invalid"
msgstr "multilib 排除‘%s’无效"

#: gcc.c:7734 gcc.c:7739
#, c-format
msgid "invalid version number `%s'"
msgstr "无效的版本号‘%s’"

#: gcc.c:7782
#, c-format
msgid "too few arguments to %%:version-compare"
msgstr "%%：version-compare 的实参太少"

#: gcc.c:7788
#, c-format
msgid "too many arguments to %%:version-compare"
msgstr "%%：version-compare 的实参太多"

#: gcc.c:7829
#, c-format
msgid "unknown operator '%s' in %%:version-compare"
msgstr "%%:version-compare 中有未知的运算符‘%s’"

#: gcov.c:391
#, c-format
msgid ""
"Usage: gcov [OPTION]... SOURCEFILE\n"
"\n"
msgstr ""
"用法：gconv [选项]... 源文件\n"
"\n"

#: gcov.c:392
#, c-format
msgid ""
"Print code coverage information.\n"
"\n"
msgstr ""
"显示代码覆盖信息。\n"
"\n"

#: gcov.c:393
#, c-format
msgid "  -h, --help                      Print this help, then exit\n"
msgstr "  -h, --help                      打印此帮助并退出\n"

#: gcov.c:394
#, c-format
msgid "  -v, --version                   Print version number, then exit\n"
msgstr "  -v, --version                    打印版本号并退出\n"

#: gcov.c:395
#, c-format
msgid "  -a, --all-blocks                Show information for every basic block\n"
msgstr "  -a, --all-blocks                显示每个基本块的信息\n"

#: gcov.c:396
#, c-format
msgid "  -b, --branch-probabilities      Include branch probabilities in output\n"
msgstr "  -b, --branch-probabilities      输出包含分支概率\n"

#: gcov.c:397
#, c-format
msgid ""
"  -c, --branch-counts             Given counts of branches taken\n"
"                                    rather than percentages\n"
msgstr "  -c, --branch-counts             给出跳转的分支数，而不是百分比\n"

#: gcov.c:399
#, c-format
msgid "  -n, --no-output                 Do not create an output file\n"
msgstr "  -n, --no-output                 不创建输出文件\n"

#: gcov.c:400
#, c-format
msgid ""
"  -l, --long-file-names           Use long output file names for included\n"
"                                    source files\n"
msgstr "  -l, --long-file-names           为包含进来的源文件使用长输出文件名\n"

#: gcov.c:402
#, c-format
msgid "  -f, --function-summaries        Output summaries for each function\n"
msgstr "  -f, --function-summaries        输出每个函数的小结信息\n"

#: gcov.c:403
#, c-format
msgid "  -o, --object-directory DIR|FILE Search for object files in DIR or called FILE\n"
msgstr "  -o, --object-directory DIR|FILE 在 DIR 中搜索目标文件，或搜索名为 FILE 的目标文件\n"

#: gcov.c:404
#, c-format
msgid "  -p, --preserve-paths            Preserve all pathname components\n"
msgstr "  -p, --preserve-paths            保留所有路径名\n"

#: gcov.c:405
#, c-format
msgid "  -u, --unconditional-branches    Show unconditional branch counts too\n"
msgstr "  -u, --unconditional-branches    同时显示无条件跳转数\n"

#: gcov.c:406
#, c-format
msgid ""
"\n"
"For bug reporting instructions, please see:\n"
"%s.\n"
msgstr ""
"\n"
"提交错误报告的具体步骤请参见：\n"
"%s。\n"

#: gcov.c:416
#, c-format
msgid "gcov (GCC) %s\n"
msgstr "gcov (GCC) %s\n"

#: gcov.c:420
#, c-format
msgid ""
"This is free software; see the source for copying conditions.\n"
"There is NO warranty; not even for MERCHANTABILITY or \n"
"FITNESS FOR A PARTICULAR PURPOSE.\n"
"\n"
msgstr ""
"本程序是自由软件；请参看源代码的版权声明。本软件没有任何担保；\n"
"包括没有适销性和某一专用目的下的适用性担保。\n"

#: gcov.c:510
#, c-format
msgid "%s:no functions found\n"
msgstr "%s：找不到函数\n"

#: gcov.c:531 gcov.c:559 fortran/dump-parse-tree.c:63
#, c-format
msgid "\n"
msgstr "\n"

#: gcov.c:546
#, c-format
msgid "%s:creating '%s'\n"
msgstr "%s：正在创建‘%s’\n"

#: gcov.c:550
#, c-format
msgid "%s:error writing output file '%s'\n"
msgstr "%s：写入输出文件‘%s’时出错\n"

#: gcov.c:555
#, c-format
msgid "%s:could not open output file '%s'\n"
msgstr "%s：不能打开输出文件‘%s’\n"

#: gcov.c:707
#, c-format
msgid "%s:cannot open graph file\n"
msgstr "%s：无法打开图文件\n"

#: gcov.c:713
#, c-format
msgid "%s:not a gcov graph file\n"
msgstr "%s：不是一个 gcov 图文件\n"

#: gcov.c:726
#, c-format
msgid "%s:version '%.4s', prefer '%.4s'\n"
msgstr "%s：版本‘%.4s’，首选‘%.4s’\n"

#: gcov.c:778
#, c-format
msgid "%s:already seen blocks for '%s'\n"
msgstr "%s：已经遇过‘%s’的块\n"

#: gcov.c:896 gcov.c:1054
#, c-format
msgid "%s:corrupted\n"
msgstr "%s：已损坏\n"

#: gcov.c:970
#, c-format
msgid "%s:cannot open data file, assuming not executed\n"
msgstr "%s：无法打开数据文件，假定未被执行过\n"

#: gcov.c:977
#, c-format
msgid "%s:not a gcov data file\n"
msgstr "%s：不是一个 gcov 数据文件\n"

#: gcov.c:990
#, c-format
msgid "%s:version '%.4s', prefer version '%.4s'\n"
msgstr "%s：版本‘%.4s’，首选版本‘%.4s’\n"

#: gcov.c:996
#, c-format
msgid "%s:stamp mismatch with graph file\n"
msgstr "%s：时间戳与图文件不匹配\n"

#: gcov.c:1022
#, c-format
msgid "%s:unknown function '%u'\n"
msgstr "%s：未知函数‘%u’\n"

#: gcov.c:1035
#, c-format
msgid "%s:profile mismatch for '%s'\n"
msgstr "%s：样本文件与‘%s’不匹配\n"

#: gcov.c:1054
#, c-format
msgid "%s:overflowed\n"
msgstr "%s：溢出\n"

#: gcov.c:1078
#, c-format
msgid "%s:'%s' lacks entry and/or exit blocks\n"
msgstr "%s：‘%s’缺少入口/出口块\n"

#: gcov.c:1083
#, c-format
msgid "%s:'%s' has arcs to entry block\n"
msgstr "%s：‘%s’有去往入口块的弧\n"

#: gcov.c:1091
#, c-format
msgid "%s:'%s' has arcs from exit block\n"
msgstr "%s：‘%s’有来自出口块的弧\n"

#: gcov.c:1299
#, c-format
msgid "%s:graph is unsolvable for '%s'\n"
msgstr "%s：图为‘%s’不可解\n"

#: gcov.c:1379
#, c-format
msgid "%s '%s'\n"
msgstr "%s‘%s’\n"

#: gcov.c:1382
#, c-format
msgid "Lines executed:%s of %d\n"
msgstr "已执行的行数：%s (共 %d 行)\n"

#: gcov.c:1386
#, c-format
msgid "No executable lines\n"
msgstr "没有可执行行\n"

#: gcov.c:1392
#, c-format
msgid "Branches executed:%s of %d\n"
msgstr "执行的分支：%s (共有 %d 个)\n"

#: gcov.c:1396
#, c-format
msgid "Taken at least once:%s of %d\n"
msgstr "至少执行一次的跳转：%s(总数为 %d)\n"

#: gcov.c:1402
#, c-format
msgid "No branches\n"
msgstr "没有跳转\n"

#: gcov.c:1404
#, c-format
msgid "Calls executed:%s of %d\n"
msgstr "执行的调用：%s(共 %d)\n"

#: gcov.c:1408
#, c-format
msgid "No calls\n"
msgstr "没有调用\n"

#: gcov.c:1549
#, c-format
msgid "%s:no lines for '%s'\n"
msgstr "%s：‘%s’没有行\n"

#: gcov.c:1744
#, c-format
msgid "call   %2d returned %s\n"
msgstr "call   %2d 返回了 %s\n"

#: gcov.c:1749
#, c-format
msgid "call   %2d never executed\n"
msgstr "call   %2d 从未被执行\n"

#: gcov.c:1754
#, c-format
msgid "branch %2d taken %s%s\n"
msgstr "branch %2d 被执行 %s%s\n"

#: gcov.c:1758
#, c-format
msgid "branch %2d never executed\n"
msgstr "branch %2d 从未被执行\n"

#: gcov.c:1763
#, c-format
msgid "unconditional %2d taken %s\n"
msgstr "unconditional %2d 被执行 %s\n"

#: gcov.c:1766
#, c-format
msgid "unconditional %2d never executed\n"
msgstr "无条件 %2d 从未执行\n"

#: gcov.c:1799
#, c-format
msgid "%s:cannot open source file\n"
msgstr "%s：无法打开源文件\n"

#: gcov.c:1809
#, c-format
msgid "%s:source file is newer than graph file '%s'\n"
msgstr "%s：源文件较图文件‘%s’新\n"

#: gcse.c:680
msgid "GCSE disabled"
msgstr "GCSE 被禁用"

#: gcse.c:6530
msgid "jump bypassing disabled"
msgstr "跳转旁路被禁用"

#: gengtype-yacc.c:560
#: /scratch/mitchell/gcc-releases/gcc-4.2.0-20070316/gcc-4.2.0-20070316/gcc/java/parse.c:2939
#: /scratch/mitchell/gcc-releases/gcc-4.2.0-20070316/gcc-4.2.0-20070316/gcc/java/parse.y:16547
msgid "syntax error: cannot back up"
msgstr "语法错误：不能备份"

#: gengtype-yacc.c:1596
#: /scratch/mitchell/gcc-releases/gcc-4.2.0-20070316/gcc-4.2.0-20070316/gcc/java/parse.c:6207
#: /scratch/mitchell/gcc-releases/gcc-4.2.0-20070316/gcc-4.2.0-20070316/gcc/java/parse.y:16545
msgid "syntax error; also virtual memory exhausted"
msgstr "语法错误；虚拟内存耗尽"

#. Depending on the version of Bison used to compile this grammar,
#. it may issue generic diagnostics spelled "syntax error" or
#. "parse error".  To prevent this from changing the translation
#. template randomly, we list all the variants of this particular
#. diagnostic here.  Translators: there is no fine distinction
#. between diagnostics with "syntax error" in them, and diagnostics
#. with "parse error" in them.  It's okay to give them both the same
#. translation.
#: gengtype-yacc.c:1600
#: /scratch/mitchell/gcc-releases/gcc-4.2.0-20070316/gcc-4.2.0-20070316/gcc/java/parse.c:6211
#: /scratch/mitchell/gcc-releases/gcc-4.2.0-20070316/gcc-4.2.0-20070316/gcc/java/parse.y:16543
msgid "syntax error"
msgstr "语法错误"

#: gengtype-yacc.c:1721
#: /scratch/mitchell/gcc-releases/gcc-4.2.0-20070316/gcc-4.2.0-20070316/gcc/java/parse.c:6332
msgid "parser stack overflow"
msgstr "词法分析栈溢出"

#. Opening quotation mark.
#: intl.c:57
msgid "`"
msgstr "‘"

#. Closing quotation mark.
#: intl.c:60
msgid "'"
msgstr "’"

#: ipa-inline.c:287
msgid "--param large-function-growth limit reached"
msgstr "到达 --param large-function-growth 给定的极限"

#: ipa-inline.c:321
msgid "--param max-inline-insns-single limit reached"
msgstr "到达 --param max-inline-insns-single 给定的极限"

#: ipa-inline.c:330
msgid "--param max-inline-insns-auto limit reached"
msgstr "到达 --param max-inline-insns-single 给定的极限"

#: ipa-inline.c:356 ipa-inline.c:802
msgid "recursive inlining"
msgstr "递归内联"

#: ipa-inline.c:815
msgid "call is unlikely"
msgstr "不太可能调用"

#: ipa-inline.c:886
msgid "--param inline-unit-growth limit reached"
msgstr "到达 --param inline-unit-growth 给定的极限"

#: langhooks.c:517
msgid "At top level:"
msgstr "在文件层："

#: langhooks.c:522
#, c-format
msgid "In member function %qs:"
msgstr "在成员函数%qs中："

#: langhooks.c:526
#, c-format
msgid "In function %qs:"
msgstr "在函数%qs中："

#: loop-iv.c:2699 tree-ssa-loop-niter.c:1153
msgid "assuming that the loop is not infinite"
msgstr "假定循环有穷"

#: loop-iv.c:2700 tree-ssa-loop-niter.c:1154
msgid "cannot optimize possibly infinite loops"
msgstr "无法优化可能无穷的循环"

#: loop-iv.c:2708 tree-ssa-loop-niter.c:1158
msgid "assuming that the loop counter does not overflow"
msgstr "假定循环计数不会溢出"

#: loop-iv.c:2709 tree-ssa-loop-niter.c:1159
msgid "cannot optimize loop, the loop counter may overflow"
msgstr "无法优化循环，循环变量可能溢出"

#. What to print when a switch has no documentation.
#: opts.c:99
msgid "This switch lacks documentation"
msgstr "此开关缺少可用文档"

#: opts.c:1187
#, c-format
msgid ""
"\n"
"Target specific options:\n"
msgstr ""
"\n"
"目标机特定的选项：\n"

#: opts.c:1208
msgid "The following options are language-independent:\n"
msgstr "下列选项是与具体语言无关的：\n"

#: opts.c:1215
#, c-format
msgid ""
"The %s front end recognizes the following options:\n"
"\n"
msgstr ""
"%s 前端可识别下列选项：\n"
"\n"

#: opts.c:1228
msgid "The --param option recognizes the following as parameters:\n"
msgstr "--param 选项可接受以下参数：\n"

#: protoize.c:582
#, c-format
msgid "%s: error writing file '%s': %s\n"
msgstr "%s：写入文件‘%s’时出错：%s\n"

#: protoize.c:626
#, c-format
msgid "%s: usage '%s [ -VqfnkN ] [ -i <istring> ] [ filename ... ]'\n"
msgstr "%s：用法‘%s [ -VqfnkN ] [ -i <字符串> ] [ 文件名 ... ]’\n"

#: protoize.c:629
#, c-format
msgid "%s: usage '%s [ -VqfnkNlgC ] [ -B <dirname> ] [ filename ... ]'\n"
msgstr "%s：用法‘%s [ -VqfnkNlgC ] [ -B <目录名> ] [ 文件名 ... ]'\n"

#: protoize.c:730
#, c-format
msgid "%s: warning: no read access for file '%s'\n"
msgstr "%s：警告：没有文件‘%s’的读权限\n"

#: protoize.c:738
#, c-format
msgid "%s: warning: no write access for file '%s'\n"
msgstr "%s：警告：没有文件‘%s’的写权限\n"

#: protoize.c:746
#, c-format
msgid "%s: warning: no write access for dir containing '%s'\n"
msgstr "%s：警告：没有对包含‘%s’的目录的写权限\n"

#. Catch cases like /.. where we try to backup to a
#. point above the absolute root of the logical file
#. system.
#: protoize.c:1133
#, c-format
msgid "%s: invalid file name: %s\n"
msgstr "%s：无效的文件名：%s\n"

#: protoize.c:1281
#, c-format
msgid "%s: %s: can't get status: %s\n"
msgstr "%s：%s：不能获取状态：%s\n"

#: protoize.c:1302
#, c-format
msgid ""
"\n"
"%s: fatal error: aux info file corrupted at line %d\n"
msgstr ""
"\n"
"%s：致命错误：辅助信息文件的第 %d 行已损坏\n"

#: protoize.c:1631
#, c-format
msgid "%s:%d: declaration of function '%s' takes different forms\n"
msgstr "%s：%d：函数‘%s’的声明形式不同\n"

#: protoize.c:1886
#, c-format
msgid "%s: compiling '%s'\n"
msgstr "%s：正在编译‘%s’\n"

#: protoize.c:1909
#, c-format
msgid "%s: wait: %s\n"
msgstr "%s：等待：%s\n"

#: protoize.c:1914
#, c-format
msgid "%s: subprocess got fatal signal %d\n"
msgstr "%s：子进程收到致命信号 %d\n"

#: protoize.c:1922
#, c-format
msgid "%s: %s exited with status %d\n"
msgstr "%s：%s 以状态码 %d 退出\n"

#: protoize.c:1971
#, c-format
msgid "%s: warning: missing SYSCALLS file '%s'\n"
msgstr "%s：警告：缺少 SYSCALLS 文件‘%s’\n"

#: protoize.c:1980 protoize.c:2009
#, c-format
msgid "%s: can't read aux info file '%s': %s\n"
msgstr "%s：无法读取输助信息文件‘%s’：%s\n"

#: protoize.c:2025 protoize.c:2053
#, c-format
msgid "%s: can't get status of aux info file '%s': %s\n"
msgstr "%s：不能获取辅助信息文件‘%s’的状态：%s\n"

#: protoize.c:2081
#, c-format
msgid "%s: can't open aux info file '%s' for reading: %s\n"
msgstr "%s：无法打开辅助信息文件‘%s’以供读出：%s\n"

#: protoize.c:2099
#, c-format
msgid "%s: error reading aux info file '%s': %s\n"
msgstr "%s：读取输助信息文件‘%s’时出错：%s\n"

#: protoize.c:2112
#, c-format
msgid "%s: error closing aux info file '%s': %s\n"
msgstr "%s：关闭输助信息文件‘%s’时出错：%s\n"

#: protoize.c:2128
#, c-format
msgid "%s: can't delete aux info file '%s': %s\n"
msgstr "%s：无法删除输助信息文件‘%s’：%s\n"

#: protoize.c:2210 protoize.c:4180
#, c-format
msgid "%s: can't delete file '%s': %s\n"
msgstr "%s：无法删除文件‘%s’：%s\n"

#: protoize.c:2288
#, c-format
msgid "%s: warning: can't rename file '%s' to '%s': %s\n"
msgstr "%s：警告：不能将文件‘%s’重命名为‘%s’：%s\n"

#: protoize.c:2410
#, c-format
msgid "%s: conflicting extern definitions of '%s'\n"
msgstr "%s：‘%s’有相互冲突的外部定义\n"

#: protoize.c:2414
#, c-format
msgid "%s: declarations of '%s' will not be converted\n"
msgstr "%s：‘%s’的声明不会被转化\n"

#: protoize.c:2416
#, c-format
msgid "%s: conflict list for '%s' follows:\n"
msgstr "%s：‘%s’的冲突列表如下：\n"

#: protoize.c:2449
#, c-format
msgid "%s: warning: using formals list from %s(%d) for function '%s'\n"
msgstr "%s：警告：使用来自 %s(%d)的形参列表，为函数‘%s’\n"

#: protoize.c:2489
#, c-format
msgid "%s: %d: '%s' used but missing from SYSCALLS\n"
msgstr "%s：%d：用到‘%s’但其并未出现在 SYSCALLS 中\n"

#: protoize.c:2495
#, c-format
msgid "%s: %d: warning: no extern definition for '%s'\n"
msgstr "%s：%d：警告：没有‘%s’的外部定义\n"

#: protoize.c:2525
#, c-format
msgid "%s: warning: no static definition for '%s' in file '%s'\n"
msgstr "%s：警告：没有‘%s’的静态定义，在文件‘%s’中\n"

#: protoize.c:2531
#, c-format
msgid "%s: multiple static defs of '%s' in file '%s'\n"
msgstr "%s：‘%s’在文件‘%s’中有多个静态定义\n"

#: protoize.c:2701 protoize.c:2704
#, c-format
msgid "%s: %d: warning: source too confusing\n"
msgstr "%s：%d：警告：源文件不可理解\n"

#: protoize.c:2899
#, c-format
msgid "%s: %d: warning: varargs function declaration not converted\n"
msgstr "%s：%d：警告：可变参数函数声明未被转化\n"

#: protoize.c:2914
#, c-format
msgid "%s: declaration of function '%s' not converted\n"
msgstr "%s：函数‘%s’的声明不会被转化\n"

#: protoize.c:3037
#, c-format
msgid "%s: warning: too many parameter lists in declaration of '%s'\n"
msgstr "%s：警告：‘%s’的声明中形参列表太多\n"

#: protoize.c:3058
#, c-format
msgid ""
"\n"
"%s: warning: too few parameter lists in declaration of '%s'\n"
msgstr ""
"\n"
"%s：警告：‘%s’的声明中形参列表太少\n"

#: protoize.c:3154
#, c-format
msgid "%s: %d: warning: found '%s' but expected '%s'\n"
msgstr "%s：%d：警告：发现‘%s’但需要‘%s’\n"

#: protoize.c:3329
#, c-format
msgid "%s: local declaration for function '%s' not inserted\n"
msgstr "%s：未插入函数‘%s’的局部声明\n"

#: protoize.c:3356
#, c-format
msgid ""
"\n"
"%s: %d: warning: can't add declaration of '%s' into macro call\n"
msgstr ""
"\n"
"%s：%d：警告：不能将‘%s’的声明添加至宏调用中\n"

#: protoize.c:3428
#, c-format
msgid "%s: global declarations for file '%s' not inserted\n"
msgstr "%s：文件‘%s’的全局声明未被插入\n"

#: protoize.c:3518 protoize.c:3548
#, c-format
msgid "%s: definition of function '%s' not converted\n"
msgstr "%s：函数‘%s’的定义不会被转化\n"

#: protoize.c:3537
#, c-format
msgid "%s: %d: warning: definition of %s not converted\n"
msgstr "%s：%d：警告：%s 的定义未被转化\n"

#: protoize.c:3863
#, c-format
msgid "%s: found definition of '%s' at %s(%d)\n"
msgstr "%s：找到‘%s’的定义，于 %s(%d)\n"

#. If we make it here, then we did not know about this
#. function definition.
#: protoize.c:3879
#, c-format
msgid "%s: %d: warning: '%s' excluded by preprocessing\n"
msgstr "%s：%d：警告：‘%s’被预处理所排除\n"

#: protoize.c:3882
#, c-format
msgid "%s: function definition not converted\n"
msgstr "%s：函数定义不会被转化\n"

#: protoize.c:3940
#, c-format
msgid "%s: '%s' not converted\n"
msgstr "%s：‘%s’未被转换\n"

#: protoize.c:3948
#, c-format
msgid "%s: would convert file '%s'\n"
msgstr "%s：将要转换文件‘%s’\n"

#: protoize.c:3951
#, c-format
msgid "%s: converting file '%s'\n"
msgstr "%s：转化文件‘%s’\n"

#: protoize.c:3961
#, c-format
msgid "%s: can't get status for file '%s': %s\n"
msgstr "%s：不能获取文件‘%s’的状态：%s\n"

#: protoize.c:4003
#, c-format
msgid "%s: can't open file '%s' for reading: %s\n"
msgstr "%s：无法打开文件‘%s’读入：%s\n"

#: protoize.c:4018
#, c-format
msgid ""
"\n"
"%s: error reading input file '%s': %s\n"
msgstr ""
"\n"
"%s：读取输入文件‘%s’时出错：%s\n"

#: protoize.c:4052
#, c-format
msgid "%s: can't create/open clean file '%s': %s\n"
msgstr "%s：无法创建/打开干净文件‘%s’：%s\n"

#: protoize.c:4157
#, c-format
msgid "%s: warning: file '%s' already saved in '%s'\n"
msgstr "%s：警告：文件‘%s’已被保存在‘%s’中\n"

#: protoize.c:4165
#, c-format
msgid "%s: can't link file '%s' to '%s': %s\n"
msgstr "%s：无法将文件‘%s’链接至文件‘%s’：%s\n"

#: protoize.c:4195
#, c-format
msgid "%s: can't create/open output file '%s': %s\n"
msgstr "%s：无法创建/打开输出文件‘%s’：%s\n"

#: protoize.c:4228
#, c-format
msgid "%s: can't change mode of file '%s': %s\n"
msgstr "%s：不能改变文件‘%s’的模式：%s\n"

#: protoize.c:4404
#, c-format
msgid "%s: cannot get working directory: %s\n"
msgstr "%s：无法得到工作目录：%s\n"

#: protoize.c:4502
#, c-format
msgid "%s: input file names must have .c suffixes: %s\n"
msgstr "%s：输入文件名必须有 .c 后缀：%s\n"

#: reload.c:3741
msgid "unable to generate reloads for:"
msgstr "无法生成重新载入，为："

#: reload1.c:1937
msgid "this is the insn:"
msgstr "这是指令："

#. It's the compiler's fault.
#: reload1.c:5178
msgid "could not find a spill register"
msgstr "找不到可舍出的寄存器"

#. It's the compiler's fault.
#: reload1.c:6841
msgid "VOIDmode on an output"
msgstr "输出有 VOIDmode"

#: reload1.c:7834
msgid "Failure trying to reload:"
msgstr "试图重新载入时失败："

#: rtl-error.c:127
msgid "unrecognizable insn:"
msgstr "无法识别的指令："

#: rtl-error.c:129
msgid "insn does not satisfy its constraints:"
msgstr "指令不满足其约束："

#: timevar.c:411
msgid ""
"\n"
"Execution times (seconds)\n"
msgstr ""
"\n"
"执行时间(以秒计)\n"

#. Print total time.
#: timevar.c:469
msgid " TOTAL                 :"
msgstr " 共计                  ："

#: timevar.c:498
#, c-format
msgid "time in %s: %ld.%06ld (%ld%%)\n"
msgstr "%s中耗时：%ld.%06ld (%ld%%)\n"

#: tlink.c:383
#, c-format
msgid "collect: reading %s\n"
msgstr "collect：读入 %s\n"

#: tlink.c:477
#, c-format
msgid "removing .rpo file"
msgstr "删除 .rpo 文件"

#: tlink.c:479
#, c-format
msgid "renaming .rpo file"
msgstr "重命名 .rpo 文件"

#: tlink.c:533
#, c-format
msgid "collect: recompiling %s\n"
msgstr "collect：重新编译 %s\n"

#: tlink.c:737
#, c-format
msgid "collect: tweaking %s in %s\n"
msgstr "collect：调整 %s，于 %s\n"

#: tlink.c:787
#, c-format
msgid "collect: relinking\n"
msgstr "collect：重新链接\n"

#: toplev.c:600
#, c-format
msgid "unrecoverable error"
msgstr "不可恢复错误"

#: toplev.c:1159
#, c-format
msgid ""
"%s%s%s version %s (%s)\n"
"%s\tcompiled by GNU C version %s.\n"
msgstr ""
"%s%s%s 版本 %s (%s)\n"
"%s\t由 GNU C 版本 %s 编译。\n"

#: toplev.c:1161
#, c-format
msgid "%s%s%s version %s (%s) compiled by CC.\n"
msgstr "由 CC 编译的 %s%s%s 版本 %s (%s)。\n"

#: toplev.c:1165
#, c-format
msgid "%s%sGGC heuristics: --param ggc-min-expand=%d --param ggc-min-heapsize=%d\n"
msgstr "%s%sGGC 准则：--param ggc-min-expand=%d --param ggc-min-heapsize=%d\n"

#: toplev.c:1227
msgid "options passed: "
msgstr "传递的选项："

#: toplev.c:1256
msgid "options enabled: "
msgstr "启用的选项："

#: toplev.c:1375
#, c-format
msgid "created and used with differing settings of '%s'"
msgstr "创建和使用时使用了不同的‘%s’设定"

#: toplev.c:1377
msgid "out of memory"
msgstr "内存不足"

#: toplev.c:1392
msgid "created and used with different settings of -fpic"
msgstr "创建和使用时使用了不同的 -fpic 设定"

#: toplev.c:1394
msgid "created and used with different settings of -fpie"
msgstr "创建和使用时使用了不同的 -fpie 设定"

#: tree-inline.c:1993
msgid "originally indirect function call not considered for inlining"
msgstr "原本间接的函数调用不被考虑内联"

#. The remainder are real diagnostic types.
#: diagnostic.def:15
msgid "fatal error: "
msgstr "致命错误："

#: diagnostic.def:16
msgid "internal compiler error: "
msgstr "编译器内部错误："

#: diagnostic.def:17
msgid "error: "
msgstr "错误："

#: diagnostic.def:18
msgid "sorry, unimplemented: "
msgstr "对不起，尚未实现："

#: diagnostic.def:19
msgid "warning: "
msgstr "警告："

#: diagnostic.def:20
msgid "anachronism: "
msgstr "时代错误："

#: diagnostic.def:21
msgid "note: "
msgstr "附注："

#: diagnostic.def:22
msgid "debug: "
msgstr "调试："

#: params.def:45
msgid "The maximum number of fields in a structure variable without direct structure accesses that GCC will attempt to track separately"
msgstr "GCC 试图分别跟踪的不存在直接结构访问的结构变量中的字段的最大数目"

#: params.def:52
#, fuzzy
msgid "The maximum number of elements in an array for wich we track its elements separately"
msgstr "一个完全剥离的单个循环最大的剥离数"

#: params.def:61
msgid "The maximum structure size (in bytes) for which GCC will use by-element copies"
msgstr "GCC 将为其考虑按元素复制的最大的结构大小(以字节表示)"

#: params.def:70
msgid "The maximum number of structure fields for which GCC will use by-element copies"
msgstr "GCC 将为其考虑按元素复制的结构字段最大数量"

#: params.def:82
msgid "The threshold ratio between instantiated fields and the total structure size"
msgstr "实例化的字段和结构总大小之比的阈值"

#: params.def:99
msgid "The maximum number of instructions in a single function eligible for inlining"
msgstr "单个可内联的函数体最多能包含的指令数"

#: params.def:111
msgid "The maximum number of instructions when automatically inlining"
msgstr "自动内联时指令的最大数量"

#: params.def:116
msgid "The maximum number of instructions inline function can grow to via recursive inlining"
msgstr "由于嵌套内联造成的内联函数代码膨胀的上限值(指令数)"

#: params.def:121
msgid "The maximum number of instructions non-inline function can grow to via recursive inlining"
msgstr "由于嵌套内联造成的非内联函数代码膨胀的上限值(指令数)"

#: params.def:126
msgid "The maximum depth of recursive inlining for inline functions"
msgstr "内联函数中嵌套内联的最大深度"

#: params.def:131
msgid "The maximum depth of recursive inlining for non-inline functions"
msgstr "非内联函数中嵌套内联的最大深度"

#: params.def:136
msgid "Inline recursively only when the probability of call being executed exceeds the parameter"
msgstr "仅当被执行的调用的概率超过此参数时方进行递归地内联"

#: params.def:143
msgid "If -fvariable-expansion-in-unroller is used, the maximum number of times that an individual variable will be expanded during loop unrolling"
msgstr "如果使用了 -fvariable-expansion-in-unroller，即指单个变量在循环展开时可以同时被展开的次数"

#: params.def:154
msgid "The maximum number of instructions to consider to fill a delay slot"
msgstr "考虑填充入延迟槽中的最大指令数"

#: params.def:165
msgid "The maximum number of instructions to consider to find accurate live register information"
msgstr "用以发现准确的活动寄存器信息的最大指令数量"

#: params.def:175
msgid "The maximum length of scheduling's pending operations list"
msgstr "调度候选操作列表的最大长度"

#: params.def:180
msgid "The size of function body to be considered large"
msgstr "超过这个大小的函数体被认为是大的"

#: params.def:184
msgid "Maximal growth due to inlining of large function (in percent)"
msgstr "内联大函数造成的代码膨胀的上限(以百分数的形式给出)"

#: params.def:188
msgid "The size of translation unit to be considered large"
msgstr "超过这个大小的翻译单元被认为是大的"

#: params.def:192
msgid "how much can given compilation unit grow because of the inlining (in percent)"
msgstr "给定的编译单元因内联造成的体积膨胀上限(以百分数表示)"

#: params.def:196
msgid "expense of call operation relative to ordinary arithmetic operations"
msgstr "调用操作相对于普通算术操作的代价"

#: params.def:203
msgid "The maximum amount of memory to be allocated by GCSE"
msgstr "GCSE 可分配的最大内存量"

#: params.def:208
msgid "The maximum number of passes to make when doing GCSE"
msgstr "进行 GCSE 的最多趟数"

#: params.def:218
msgid "The threshold ratio for performing partial redundancy elimination after reload"
msgstr "重新载入后进行部分冗余消除的比例阈值"

#: params.def:225
msgid "The threshold ratio of critical edges execution count that permit performing redundancy elimination after reload"
msgstr "重新载入后允许进行冗余消除的关键边执行次数的比例阈值"

#: params.def:236
msgid "The maximum number of instructions to consider to unroll in a loop"
msgstr "单个循环中考虑展开的最大指令数"

#: params.def:242
msgid "The maximum number of instructions to consider to unroll in a loop on average"
msgstr "单个循环中考虑展开的平均最大指令数"

#: params.def:247
msgid "The maximum number of unrollings of a single loop"
msgstr "单个循环最多可以被展开的次数"

#: params.def:252
msgid "The maximum number of insns of a peeled loop"
msgstr "剥离后的循环所能有的最大指令数"

#: params.def:257
msgid "The maximum number of peelings of a single loop"
msgstr "单个循环最大的剥离数"

#: params.def:262
msgid "The maximum number of insns of a completely peeled loop"
msgstr "一个完全剥离的循环所能有的最大指令数"

#: params.def:267
msgid "The maximum number of peelings of a single loop that is peeled completely"
msgstr "一个完全剥离的单个循环最大的剥离数"

#: params.def:272
msgid "The maximum number of insns of a peeled loop that rolls only once"
msgstr "被剥离后只卷绕一次的循环包含的最多指令数"

#: params.def:278
msgid "The maximum number of insns of an unswitched loop"
msgstr "去开关后的循环所能有的最大指令数"

#: params.def:283
msgid "The maximum number of unswitchings in a single loop"
msgstr "单个循环中考虑去开关的最大指令数"

#: params.def:290
msgid "Bound on the number of iterations the brute force # of iterations analysis algorithm evaluates"
msgstr ""

#: params.def:296
msgid "Bound on the cost of an expression to compute the number of iterations"
msgstr ""

#: params.def:301
msgid "Maximum number of loops to perform swing modulo scheduling on (mainly for debugging)"
msgstr ""

#: params.def:307
msgid "A factor for tuning the upper bound that swing modulo scheduler uses for scheduling a loop"
msgstr ""

#: params.def:311
msgid "The number of cycles the swing modulo scheduler considers when checking conflicts using DFA"
msgstr ""

#: params.def:315
msgid "A threshold on the average loop count considered by the swing modulo scheduler"
msgstr ""

#: params.def:320
msgid "Select fraction of the maximal count of repetitions of basic block in program given basic block needs to have to be considered hot"
msgstr ""

#: params.def:324
msgid "Select fraction of the maximal frequency of executions of basic block in function given basic block needs to have to be considered hot"
msgstr ""

#: params.def:340
msgid "The maximum number of loop iterations we predict statically"
msgstr "静态预测时的最多循环次数"

#: params.def:344
msgid "The percentage of function, weighted by execution frequency, that must be covered by trace formation. Used when profile feedback is available"
msgstr "必须被踪迹形成所覆盖的函数百分比，以执行频率加权。当取样反馈可用时使用"

#: params.def:348
msgid "The percentage of function, weighted by execution frequency, that must be covered by trace formation. Used when profile feedback is not available"
msgstr "必须被踪迹形成所覆盖的函数百分比，以执行频率加权。当取样反馈不可用时使用"

#: params.def:352
msgid "Maximal code growth caused by tail duplication (in percent)"
msgstr "以百分比表示的尾复制所引起的最大代码膨胀"

#: params.def:356
msgid "Stop reverse growth if the reverse probability of best edge is less than this threshold (in percent)"
msgstr "当最优边的反向概率小于此阈值(以百分数表示)时停止反向增长"

#: params.def:360
msgid "Stop forward growth if the probability of best edge is less than this threshold (in percent). Used when profile feedback is available"
msgstr "当最优边的概率小于此限值(以百分数表示)时，停止前向增长。当取样反馈可用时使用。"

#: params.def:364
msgid "Stop forward growth if the probability of best edge is less than this threshold (in percent). Used when profile feedback is not available"
msgstr "当最优边的概率小于此限值(以百分数表示)时，停止前向增长。当取样反馈不可用时使用。"

#: params.def:370
msgid "The maximum number of incoming edges to consider for crossjumping"
msgstr "考虑进行交叉跳转的最大入边数量"

#: params.def:376
msgid "The minimum number of matching instructions to consider for crossjumping"
msgstr "考虑进行交叉跳转的最小匹配指令数量"

#: params.def:382
msgid "The maximum expansion factor when copying basic blocks"
msgstr "复制基本块时最大的展开因子"

#: params.def:388
msgid "The maximum number of insns to duplicate when unfactoring computed gotos"
msgstr ""

#: params.def:394
msgid "The maximum length of path considered in cse"
msgstr "公因式消去时考虑的最大路径长度"

#: params.def:398
msgid "The maximum instructions CSE process before flushing"
msgstr "清空前公因式消去处理的最大指令数"

#: params.def:405
msgid "The minimum cost of an expensive expression in the loop invariant motion"
msgstr "循环不变量转移时一条昂贵的表达式的最小代价"

#: params.def:414
msgid "Bound on number of candidates below that all candidates are considered in iv optimizations"
msgstr ""

#: params.def:422
msgid "Bound on number of iv uses in loop optimized in iv optimizations"
msgstr ""

#: params.def:430
msgid "If number of candidates in the set is smaller, we always try to remove unused ivs during its optimization"
msgstr ""

#: params.def:435
msgid "Bound on size of expressions used in the scalar evolutions analyzer"
msgstr ""

#: params.def:440
msgid "Bound on number of runtime checks inserted by the vectorizer's loop versioning"
msgstr "矢量循环版本化插入的运行时检查次数的范围"

#: params.def:447
msgid "Given N calls and V call-clobbered vars in a function.  Use .GLOBAL_VAR if NxV is larger than this limit"
msgstr ""

#: params.def:452
msgid "The maximum memory locations recorded by cselib"
msgstr "cselib 最多记录的内存位置"

#: params.def:456
msgid "The maximum memory locations recorded by flow"
msgstr "数据流分析最多记录的内存位置"

#: params.def:469
msgid "Minimum heap expansion to trigger garbage collection, as a percentage of the total size of the heap"
msgstr "引发垃圾收集的堆展开的最小值，以占堆总大小的百分比给出"

#: params.def:474
msgid "Minimum heap size before we start collecting garbage, in kilobytes"
msgstr "开始垃圾回收时最小的堆大小，以千字节表示"

#: params.def:482
msgid "The maximum number of instructions to search backward when looking for equivalent reload"
msgstr "后向搜索以寻找等价重载入时要搜索的最大指令数量"

#: params.def:487
msgid "The maximum number of virtual operands allowed to represent aliases before triggering alias grouping"
msgstr ""

#: params.def:492
msgid "The maximum number of blocks in a region to be considered for interblock scheduling"
msgstr "一个区域中考虑进行块间调度的最大块数"

#: params.def:497
msgid "The maximum number of insns in a region to be considered for interblock scheduling"
msgstr "一个区域中考虑进行块间调度的最大指令数"

#: params.def:502
msgid "The minimum probability of reaching a source block for interblock speculative scheduling"
msgstr "块间投机调度时到达一个源块的最小概率"

#: params.def:507
#, fuzzy
msgid "The maximum number of iterations through CFG to extend regions"
msgstr "单个循环中考虑展开的最大指令数"

#: params.def:512
#, fuzzy
msgid "The maximum conflict delay for an insn to be considered for speculative motion"
msgstr "一个区域中考虑进行块间调度的最大指令数"

#: params.def:517
msgid "The minimal probability of speculation success (in percents), so that speculative insn will be scheduled."
msgstr "以百分比表示的投机成功的最小概率，影响对投机指令的调度"

#: params.def:522
msgid "The maximum number of RTL nodes that can be recorded as combiner's last value"
msgstr ""

#: params.def:530
msgid "The upper bound for sharing integer constants"
msgstr "共享整型常量的上界"

#: params.def:549
#, fuzzy
msgid "Minimum number of virtual mappings to consider switching to full virtual renames"
msgstr "考虑填充入延迟槽中的最大指令数"

#: params.def:554
msgid "Ratio between virtual mappings and virtual symbols to do full virtual renames"
msgstr ""

#: params.def:559
msgid "The lower bound for a buffer to be considered for stack smashing protection"
msgstr "考虑预防堆栈溢出的缓冲区的下限值"

#: params.def:577
msgid "Maximum number of statements allowed in a block that needs to be duplicated when threading jumps"
msgstr ""

#: params.def:586
#, fuzzy
msgid "Maximum number of fields in a structure before pointer analysis treats the structure as a single variable"
msgstr "GCC 试图分别跟踪的不存在直接结构访问的结构变量中的字段的最大数目"

#: params.def:591
msgid "The maximum number of instructions ready to be issued to be considered by the scheduler during the first scheduling pass"
msgstr "首趟调度考虑准备生成的指令的最大数量"

#: config/alpha/alpha.c:5120
#, c-format
msgid "invalid %%H value"
msgstr "无效 %%H 值"

#: config/alpha/alpha.c:5141 config/bfin/bfin.c:1236
#, c-format
msgid "invalid %%J value"
msgstr "无效 %%J 值"

#: config/alpha/alpha.c:5171 config/ia64/ia64.c:4655
#, c-format
msgid "invalid %%r value"
msgstr "无效 %%r 值"

#: config/alpha/alpha.c:5181 config/rs6000/rs6000.c:10634
#: config/xtensa/xtensa.c:1711
#, c-format
msgid "invalid %%R value"
msgstr "无效 %%R 值"

#: config/alpha/alpha.c:5187 config/rs6000/rs6000.c:10553
#: config/xtensa/xtensa.c:1678
#, c-format
msgid "invalid %%N value"
msgstr "无效 %%N 值"

#: config/alpha/alpha.c:5195 config/rs6000/rs6000.c:10581
#, c-format
msgid "invalid %%P value"
msgstr "无效 %%P 值"

#: config/alpha/alpha.c:5203
#, c-format
msgid "invalid %%h value"
msgstr "无效 %%h 值"

#: config/alpha/alpha.c:5211 config/xtensa/xtensa.c:1704
#, c-format
msgid "invalid %%L value"
msgstr "无效 %%L 值"

#: config/alpha/alpha.c:5250 config/rs6000/rs6000.c:10535
#, c-format
msgid "invalid %%m value"
msgstr "无效 %%m 值"

#: config/alpha/alpha.c:5258 config/rs6000/rs6000.c:10543
#, c-format
msgid "invalid %%M value"
msgstr "无效 %%M 值"

#: config/alpha/alpha.c:5302
#, c-format
msgid "invalid %%U value"
msgstr "无效 %%U 值"

#: config/alpha/alpha.c:5314 config/alpha/alpha.c:5328
#: config/rs6000/rs6000.c:10642
#, c-format
msgid "invalid %%s value"
msgstr "无效 %%s 值"

#: config/alpha/alpha.c:5351
#, c-format
msgid "invalid %%C value"
msgstr "无效 %%C 值"

#: config/alpha/alpha.c:5388 config/rs6000/rs6000.c:10373
#: config/rs6000/rs6000.c:10392
#, c-format
msgid "invalid %%E value"
msgstr "无效 %%E 值"

#: config/alpha/alpha.c:5413 config/alpha/alpha.c:5461
#, c-format
msgid "unknown relocation unspec"
msgstr "未指定未知的重定位方式"

#: config/alpha/alpha.c:5422 config/crx/crx.c:1081
#: config/rs6000/rs6000.c:10957
#, c-format
msgid "invalid %%xn code"
msgstr "无效的 %%xn 代码"

#: config/arc/arc.c:1725 config/m32r/m32r.c:1804
#, c-format
msgid "invalid operand to %%R code"
msgstr "%%R 代码的操作数无效"

#: config/arc/arc.c:1757 config/m32r/m32r.c:1827
#, c-format
msgid "invalid operand to %%H/%%L code"
msgstr "%%H/%%L 代码的操作数无效"

#: config/arc/arc.c:1779 config/m32r/m32r.c:1898
#, c-format
msgid "invalid operand to %%U code"
msgstr "%%U 代码的操作数无效"

#: config/arc/arc.c:1790
#, c-format
msgid "invalid operand to %%V code"
msgstr "%%V 代码的操作数无效"

#. Unknown flag.
#. Undocumented flag.
#: config/arc/arc.c:1797 config/m32r/m32r.c:1925 config/sparc/sparc.c:6906
#, c-format
msgid "invalid operand output code"
msgstr "无效的操作数输出代码"

#: config/arm/arm.c:11005 config/arm/arm.c:11023
#, c-format
msgid "predicated Thumb instruction"
msgstr "预测到的 Thumb 指令"

#: config/arm/arm.c:11011
#, c-format
msgid "predicated instruction in conditional sequence"
msgstr "在条件序列中预测到的指令"

#: config/arm/arm.c:11080
#, c-format
msgid "invalid shift operand"
msgstr "无效的移位操作数"

#: config/arm/arm.c:11127 config/arm/arm.c:11137 config/arm/arm.c:11147
#: config/arm/arm.c:11173 config/arm/arm.c:11191 config/arm/arm.c:11226
#: config/arm/arm.c:11245 config/arm/arm.c:11260 config/arm/arm.c:11286
#: config/arm/arm.c:11293 config/arm/arm.c:11300
#, c-format
msgid "invalid operand for code '%c'"
msgstr "代码‘%c’的操作数无效"

#: config/arm/arm.c:11186
#, c-format
msgid "instruction never exectued"
msgstr "指令从不被执行"

#: config/arm/arm.c:11311
#, c-format
msgid "missing operand"
msgstr "缺少操作数"

#: config/avr/avr.c:1046
#, c-format
msgid "address operand requires constraint for X, Y, or Z register"
msgstr "地址操作数需要 X、Y 或 Z 寄存器约束"

#: config/avr/avr.c:1153
msgid "bad address, not (reg+disp):"
msgstr "地址错误，不是(reg+disp)："

#: config/avr/avr.c:1160
msgid "bad address, not post_inc or pre_dec:"
msgstr "错误的地址，不是 post_inc 或 pre_dec:"

#: config/avr/avr.c:1171
msgid "internal compiler error.  Bad address:"
msgstr "编译器内部错误。错误的地址："

#: config/avr/avr.c:1184
msgid "internal compiler error.  Unknown mode:"
msgstr "编译器内部错误。未知的模式："

#: config/avr/avr.c:1807 config/avr/avr.c:2490
msgid "invalid insn:"
msgstr "无效指令："

#: config/avr/avr.c:1841 config/avr/avr.c:1927 config/avr/avr.c:1976
#: config/avr/avr.c:2004 config/avr/avr.c:2099 config/avr/avr.c:2268
#: config/avr/avr.c:2524 config/avr/avr.c:2636
msgid "incorrect insn:"
msgstr "错误指令："

#: config/avr/avr.c:2023 config/avr/avr.c:2184 config/avr/avr.c:2339
#: config/avr/avr.c:2702
msgid "unknown move insn:"
msgstr "无效的 move 指令："

#: config/avr/avr.c:2932
msgid "bad shift insn:"
msgstr "错误的 shift 指令"

#: config/avr/avr.c:3048 config/avr/avr.c:3496 config/avr/avr.c:3882
msgid "internal compiler error.  Incorrect shift:"
msgstr "编译器内部错误。不正确的移位量："

#: config/bfin/bfin.c:1198
#, c-format
msgid "invalid %%j value"
msgstr "无效的 %%j 值"

#: config/bfin/bfin.c:1366
#, c-format
msgid "invalid const_double operand"
msgstr "无效的双精度常量操作数"

#: config/c4x/c4x.c:1583
msgid "using CONST_DOUBLE for address"
msgstr "为地址使用 CONST_DOUBLE"

#: config/c4x/c4x.c:1721
msgid "c4x_address_cost: Invalid addressing mode"
msgstr "c4x_address_cost：无效的寻址模式"

#: config/c4x/c4x.c:1856
#, c-format
msgid "c4x_print_operand: %%L inconsistency"
msgstr "c4x_print_operand：%%L 不一致"

#: config/c4x/c4x.c:1862
#, c-format
msgid "c4x_print_operand: %%N inconsistency"
msgstr "c4x_print_operand：%%N 不一致"

#: config/c4x/c4x.c:1903
#, c-format
msgid "c4x_print_operand: %%O inconsistency"
msgstr "c4x_print_operand：%%O 不一致"

#: config/c4x/c4x.c:1998
msgid "c4x_print_operand: Bad operand case"
msgstr "c4x_print_operand：错误的操作数类型"

#: config/c4x/c4x.c:2039
msgid "c4x_print_operand_address: Bad post_modify"
msgstr "c4x_print_operand_address：错误的后更改"

#: config/c4x/c4x.c:2061
msgid "c4x_print_operand_address: Bad pre_modify"
msgstr "c4x_print_operand_address：错误的前更改"

#: config/c4x/c4x.c:2109 config/c4x/c4x.c:2121 config/c4x/c4x.c:2136
msgid "c4x_print_operand_address: Bad operand case"
msgstr "c4x_print_operand_address：错误的操作数类型"

#: config/c4x/c4x.c:2387
msgid "c4x_rptb_insert: Cannot find start label"
msgstr "c4x_rptb_insert：找不到起始标号"

#: config/c4x/c4x.c:2989
msgid "invalid indirect memory address"
msgstr "无效的间接内存地址"

#: config/c4x/c4x.c:3078
msgid "invalid indirect (S) memory address"
msgstr "无效的间接(S)内存地址"

#: config/c4x/c4x.c:3413
msgid "c4x_valid_operands: Internal error"
msgstr "c4x_valid_operands：内部错误"

#: config/c4x/c4x.c:3852
msgid "c4x_operand_subword: invalid mode"
msgstr "c4x_operand_subword：无效模式"

#: config/c4x/c4x.c:3855
msgid "c4x_operand_subword: invalid operand"
msgstr "c4x_operand_subword：无效操作数"

#. We could handle these with some difficulty.
#. e.g., *p-- => *(p-=2); *(p+1).
#: config/c4x/c4x.c:3881
msgid "c4x_operand_subword: invalid autoincrement"
msgstr "c4x_operand_subword：无效的自增量"

#: config/c4x/c4x.c:3887
msgid "c4x_operand_subword: invalid address"
msgstr "c4x_operand_subword：无效地址"

#: config/c4x/c4x.c:3898
msgid "c4x_operand_subword: address not offsettable"
msgstr "c4x_operand_subword：无法取偏移量的地址"

#: config/c4x/c4x.c:4100
msgid "c4x_rptb_rpts_p: Repeat block top label moved"
msgstr "c4x_rptb_rpts_p：重复块的顶层标号被移动"

#. Use `%s' to print the string in case there are any escape
#. characters in the message.
#: config/cris/cris.c:491 fortran/dump-parse-tree.c:79
#: fortran/dump-parse-tree.c:421 fortran/dump-parse-tree.c:754
#: fortran/dump-parse-tree.c:801 c-typeck.c:4519 c-typeck.c:4534
#: c-typeck.c:4549 final.c:2802 final.c:2804 gcc.c:4741 loop-iv.c:2701
#: loop-iv.c:2710 rtl-error.c:112 toplev.c:604 tree-ssa-loop-niter.c:1164
#: cp/parser.c:2086 cp/typeck.c:4465 java/expr.c:412
#: /scratch/mitchell/gcc-releases/gcc-4.2.0-20070316/gcc-4.2.0-20070316/gcc/java/parse.y:5005
#, gcc-internal-format
msgid "%s"
msgstr "%s"

#: config/cris/cris.c:543
msgid "unexpected index-type in cris_print_index"
msgstr "cris_print_index 中有非预期的索引类型"

#: config/cris/cris.c:557
msgid "unexpected base-type in cris_print_base"
msgstr "cris_print_base 中有非预期的基类型"

#: config/cris/cris.c:673
msgid "invalid operand for 'b' modifier"
msgstr "‘b’修饰符的操作数无效"

#: config/cris/cris.c:690
msgid "invalid operand for 'o' modifier"
msgstr "‘o’修饰符的操作数无效"

#: config/cris/cris.c:709
msgid "invalid operand for 'O' modifier"
msgstr "‘O’修饰符的操作数无效"

#: config/cris/cris.c:742
msgid "invalid operand for 'p' modifier"
msgstr "‘p’修饰符的操作数无效"

#: config/cris/cris.c:781
msgid "invalid operand for 'z' modifier"
msgstr "‘z’修饰符的操作数无效"

#: config/cris/cris.c:835 config/cris/cris.c:865
msgid "invalid operand for 'H' modifier"
msgstr "‘H’修饰符的操作数无效"

#: config/cris/cris.c:841
msgid "bad register"
msgstr "错误的寄存器名"

#: config/cris/cris.c:886
msgid "invalid operand for 'e' modifier"
msgstr "‘e’修饰符的操作数无效"

#: config/cris/cris.c:903
msgid "invalid operand for 'm' modifier"
msgstr "‘m’修饰符的操作数无效"

#: config/cris/cris.c:928
msgid "invalid operand for 'A' modifier"
msgstr "‘A’修饰符的操作数无效"

#: config/cris/cris.c:951
msgid "invalid operand for 'D' modifier"
msgstr "‘D’修饰符的操作数无效"

#: config/cris/cris.c:965
msgid "invalid operand for 'T' modifier"
msgstr "‘T’修饰符的操作数无效"

#: config/cris/cris.c:974
msgid "invalid operand modifier letter"
msgstr "无效的操作数修饰符字母"

#: config/cris/cris.c:1031
msgid "unexpected multiplicative operand"
msgstr "无效的乘性操作数"

#: config/cris/cris.c:1051
msgid "unexpected operand"
msgstr "非预期的操作数"

#: config/cris/cris.c:1084 config/cris/cris.c:1094
msgid "unrecognized address"
msgstr "无法识别的地址"

#: config/cris/cris.c:2020
msgid "unrecognized supposed constant"
msgstr "预期的常量无法识别"

#: config/cris/cris.c:2395 config/cris/cris.c:2459
msgid "unexpected side-effects in address"
msgstr "地址中有非预期的副作用"

#. Can't possibly get a GOT-needing-fixup for a function-call,
#. right?
#: config/cris/cris.c:3253
msgid "Unidentifiable call op"
msgstr "无法识别的 call 操作"

#: config/cris/cris.c:3304
#, c-format
msgid "PIC register isn't set up"
msgstr "尚未设定好 PIC 寄存器"

#: config/fr30/fr30.c:463
#, c-format
msgid "fr30_print_operand_address: unhandled address"
msgstr "fr30_print_operand：未处理的指针"

#: config/fr30/fr30.c:487
#, c-format
msgid "fr30_print_operand: unrecognized %%p code"
msgstr "fr30_print_operand：无法识别的 %%p 代码"

#: config/fr30/fr30.c:507
#, c-format
msgid "fr30_print_operand: unrecognized %%b code"
msgstr "fr30_print_operand：无法识别的 %%b 代码"

#: config/fr30/fr30.c:528
#, c-format
msgid "fr30_print_operand: unrecognized %%B code"
msgstr "fr30_print_operand：无法识别的 %%B 代码"

#: config/fr30/fr30.c:536
#, c-format
msgid "fr30_print_operand: invalid operand to %%A code"
msgstr "fr30_print_operand：%%A 代码操作数无效"

#: config/fr30/fr30.c:553
#, c-format
msgid "fr30_print_operand: invalid %%x code"
msgstr "fr30_print_operand：无效的 %%x 代码"

#: config/fr30/fr30.c:560
#, c-format
msgid "fr30_print_operand: invalid %%F code"
msgstr "fr30_print_operand：无效的 %%F 代码"

#: config/fr30/fr30.c:577
#, c-format
msgid "fr30_print_operand: unknown code"
msgstr "fr30_print_operand：未知代码"

#: config/fr30/fr30.c:605 config/fr30/fr30.c:614 config/fr30/fr30.c:625
#: config/fr30/fr30.c:638
#, c-format
msgid "fr30_print_operand: unhandled MEM"
msgstr "fr30_print_operand：未处理的 MEM"

#: config/frv/frv.c:2540
msgid "bad insn to frv_print_operand_address:"
msgstr "给 frv_print_operand_address 错误的指令："

#: config/frv/frv.c:2551
msgid "bad register to frv_print_operand_memory_reference_reg:"
msgstr "给 frv_print_operand_memory_reference_reg 错误的寄存器："

#: config/frv/frv.c:2590 config/frv/frv.c:2600 config/frv/frv.c:2609
#: config/frv/frv.c:2630 config/frv/frv.c:2635
msgid "bad insn to frv_print_operand_memory_reference:"
msgstr "给 frv_print_operand_memory_reference 错误的指令："

#: config/frv/frv.c:2721
#, c-format
msgid "bad condition code"
msgstr "错误的条件码"

#: config/frv/frv.c:2796
msgid "bad insn in frv_print_operand, bad const_double"
msgstr "frv_print_operand 中有错误指令，错误的 const_double"

#: config/frv/frv.c:2857
msgid "bad insn to frv_print_operand, 'e' modifier:"
msgstr "给 frv_print_operand 错误的指令，‘e’修饰符："

#: config/frv/frv.c:2865
msgid "bad insn to frv_print_operand, 'F' modifier:"
msgstr "给 frv_print_operand 错误的指令，‘F’修饰符："

#: config/frv/frv.c:2881
msgid "bad insn to frv_print_operand, 'f' modifier:"
msgstr "给 frv_print_operand 错误的指令，‘f’修饰符："

#: config/frv/frv.c:2895
msgid "bad insn to frv_print_operand, 'g' modifier:"
msgstr "给 frv_print_operand 错误的指令，‘g’修饰符："

#: config/frv/frv.c:2943
msgid "bad insn to frv_print_operand, 'L' modifier:"
msgstr "给 frv_print_operand 错误的指令，‘L’修饰符："

#: config/frv/frv.c:2956
msgid "bad insn to frv_print_operand, 'M/N' modifier:"
msgstr "给 frv_print_operand 错误的指令，‘M/N’修饰符："

#: config/frv/frv.c:2977
msgid "bad insn to frv_print_operand, 'O' modifier:"
msgstr "给 frv_print_operand 错误的指令，‘O’修饰符："

#: config/frv/frv.c:2995
msgid "bad insn to frv_print_operand, P modifier:"
msgstr "给 frv_print_operand 错误的指令，P 修饰符："

#: config/frv/frv.c:3015
msgid "bad insn in frv_print_operand, z case"
msgstr "frv_print_operand 中有错误指令，z case"

#: config/frv/frv.c:3046
msgid "bad insn in frv_print_operand, 0 case"
msgstr "frv_print_operand 中有错误指令，0 case"

#: config/frv/frv.c:3051
msgid "frv_print_operand: unknown code"
msgstr "frv_print_operand：未知代码"

#: config/frv/frv.c:4420
msgid "bad output_move_single operand"
msgstr "错误的 output_move_single 操作数"

#: config/frv/frv.c:4547
msgid "bad output_move_double operand"
msgstr "错误的 output_move_double 操作数"

#: config/frv/frv.c:4689
msgid "bad output_condmove_single operand"
msgstr "错误的 output_condmove_single 操作数"

#. This macro is a C statement to print on `stderr' a string describing the
#. particular machine description choice.  Every machine description should
#. define `TARGET_VERSION'.  For example:
#.
#. #ifdef MOTOROLA
#. #define TARGET_VERSION           fprintf (stderr, " (68k, Motorola syntax)");
#. #else
#. #define TARGET_VERSION           fprintf (stderr, " (68k, MIT syntax)");
#. #endif
#: config/frv/frv.h:328
#, c-format
msgid " (frv)"
msgstr " (frv)"

#: config/i386/i386.c:7291
#, c-format
msgid "invalid UNSPEC as operand"
msgstr "无效的 UNSPEC 用作操作数"

#: config/i386/i386.c:7886
#, c-format
msgid "operand is neither a constant nor a condition code, invalid operand code 'c'"
msgstr "操作数既不是一个常量也不是一个条件码，无效的操作数代码‘c’"

#: config/i386/i386.c:7939
#, c-format
msgid "invalid operand code '%c'"
msgstr "无效的操作数代码‘%c’"

#: config/i386/i386.c:7982
#, c-format
msgid "invalid constraints for operand"
msgstr "操作数的约束无效"

#: config/i386/i386.c:13643
msgid "unknown insn mode"
msgstr "未知的指令模式"

#. If the environment variable DJDIR is not defined, then DJGPP is not        installed correctly and GCC will quickly become confused with the        default prefix settings. Report the problem now so the user doesn't        receive deceptive "file not found" error messages later.
#. DJDIR is automatically defined by the DJGPP environment config            file pointed to by the environment variable DJGPP. Examine DJGPP            to try and figure out what's wrong.
#: config/i386/xm-djgpp.h:61
#, c-format
msgid "environment variable DJGPP not defined"
msgstr "没有定义 DJGPP 环境变量"

#: config/i386/xm-djgpp.h:63
#, c-format
msgid "environment variable DJGPP points to missing file '%s'"
msgstr "环境变量 DJGPP 指向的文件‘%s’不存在"

#: config/i386/xm-djgpp.h:66
#, c-format
msgid "environment variable DJGPP points to corrupt file '%s'"
msgstr "环境变量 DJGPP 指向的文件‘%s’已损坏"

#: config/ia64/ia64.c:4707
#, c-format
msgid "ia64_print_operand: unknown code"
msgstr "ia64_print_operand：未知代码"

#: config/ia64/ia64.c:9798
msgid "invalid conversion from %<__fpreg%>"
msgstr "从%<__fpreg%>的转换无效"

#: config/ia64/ia64.c:9801
msgid "invalid conversion to %<__fpreg%>"
msgstr "向%<__fpreg%>的转换无效"

#: config/ia64/ia64.c:9814 config/ia64/ia64.c:9825
msgid "invalid operation on %<__fpreg%>"
msgstr "对%<__fpreg%>的操作无效"

#: config/iq2000/iq2000.c:3128
#, c-format
msgid "invalid %%P operand"
msgstr "无效的 %%P 操作数"

#: config/iq2000/iq2000.c:3136 config/rs6000/rs6000.c:10571
#, c-format
msgid "invalid %%p value"
msgstr "无效的 %%p 值"

#: config/iq2000/iq2000.c:3192 config/mips/mips.c:5665
#, c-format
msgid "invalid use of %%d, %%x, or %%X"
msgstr "对 %%d、%%x 或 %%X 的无效使用"

#: config/m32r/m32r.c:1774
#, c-format
msgid "invalid operand to %%s code"
msgstr "%%s 代码的操作数无效"

#: config/m32r/m32r.c:1781
#, c-format
msgid "invalid operand to %%p code"
msgstr "%%p 代码的操作数无效"

#: config/m32r/m32r.c:1836
msgid "bad insn for 'A'"
msgstr "‘A’的指令错误"

#: config/m32r/m32r.c:1883
#, c-format
msgid "invalid operand to %%T/%%B code"
msgstr "%%T/%%B 代码的操作数无效"

#: config/m32r/m32r.c:1906
#, c-format
msgid "invalid operand to %%N code"
msgstr "%%N 代码的操作数无效"

#: config/m32r/m32r.c:1939
msgid "pre-increment address is not a register"
msgstr "前自增地址不是一个寄存器"

#: config/m32r/m32r.c:1946
msgid "pre-decrement address is not a register"
msgstr "前自减地址不是一个寄存器"

#: config/m32r/m32r.c:1953
msgid "post-increment address is not a register"
msgstr "后自增地址不是一个寄存器"

#: config/m32r/m32r.c:2029 config/m32r/m32r.c:2043
#: config/rs6000/rs6000.c:17940
msgid "bad address"
msgstr "错误地址"

#: config/m32r/m32r.c:2048
msgid "lo_sum not of register"
msgstr "lo_sum 不是寄存器"

#. !!!! SCz wrong here.
#: config/m68hc11/m68hc11.c:3188 config/m68hc11/m68hc11.c:3566
msgid "move insn not handled"
msgstr "未处理 move 指令"

#: config/m68hc11/m68hc11.c:3412 config/m68hc11/m68hc11.c:3496
#: config/m68hc11/m68hc11.c:3769
msgid "invalid register in the move instruction"
msgstr "move 指令中出现无效寄存器"

#: config/m68hc11/m68hc11.c:3446
msgid "invalid operand in the instruction"
msgstr "此指令中操作数无效"

#: config/m68hc11/m68hc11.c:3743
msgid "invalid register in the instruction"
msgstr "此指令中寄存器无效"

#: config/m68hc11/m68hc11.c:3776
msgid "operand 1 must be a hard register"
msgstr "操作数 1 必须是一个硬件寄存器"

#: config/m68hc11/m68hc11.c:3790
msgid "invalid rotate insn"
msgstr "无效的循环移位指令"

#: config/m68hc11/m68hc11.c:4214
msgid "registers IX, IY and Z used in the same INSN"
msgstr "在相同指令中使用寄存器 IX、IY 和 Z"

#: config/m68hc11/m68hc11.c:4551 config/m68hc11/m68hc11.c:4851
msgid "cannot do z-register replacement"
msgstr "无法完成 z 寄存器替换"

#: config/m68hc11/m68hc11.c:4914
msgid "invalid Z register replacement for insn"
msgstr "无效的 Z 寄存器替换"

#: config/mips/mips.c:5333
msgid "mips_debugger_offset called with non stack/frame/arg pointer"
msgstr "mips_debugger_offset 为非堆栈/框架/参数指针调用"

#: config/mips/mips.c:5543
#, c-format
msgid "PRINT_OPERAND, invalid insn for %%C"
msgstr "PRINT_OPERAND，%%C 的指令无效"

#: config/mips/mips.c:5560
#, c-format
msgid "PRINT_OPERAND, invalid insn for %%N"
msgstr "PRINT_OPERAND，%%N 的指令无效"

#: config/mips/mips.c:5569
#, c-format
msgid "PRINT_OPERAND, invalid insn for %%F"
msgstr "PRINT_OPERAND，%%F 的指令无效"

#: config/mips/mips.c:5578
#, c-format
msgid "PRINT_OPERAND, invalid insn for %%W"
msgstr "PRINT_OPERAND，%%W 的指令无效"

#: config/mips/mips.c:5599
#, c-format
msgid "invalid %%Y value"
msgstr "无效的 %%Y 值"

#: config/mips/mips.c:5616 config/mips/mips.c:5624
#, c-format
msgid "PRINT_OPERAND, invalid insn for %%q"
msgstr "PRINT_OPERAND，%%q 指令无效"

#: config/mips/mips.c:5694
msgid "PRINT_OPERAND, invalid operand for relocation"
msgstr "PRINT_OPERAND，重定位的操作数无效"

#: config/mmix/mmix.c:1467 config/mmix/mmix.c:1597
msgid "MMIX Internal: Expected a CONST_INT, not this"
msgstr "MMIX 内部错误：预期的是整常量，不是这个"

#: config/mmix/mmix.c:1546
msgid "MMIX Internal: Bad value for 'm', not a CONST_INT"
msgstr "MMIX 内部错误：‘m’值错误，不是一个整常量"

#: config/mmix/mmix.c:1565
msgid "MMIX Internal: Expected a register, not this"
msgstr "MMIX 内部错误：需要一个寄存器，不是这个"

#: config/mmix/mmix.c:1575
msgid "MMIX Internal: Expected a constant, not this"
msgstr "MMIX 内部错误：需要一个常量，不是这个"

#. We need the original here.
#: config/mmix/mmix.c:1659
msgid "MMIX Internal: Cannot decode this operand"
msgstr "MMIX 内部错误：无法解码此操作数"

#: config/mmix/mmix.c:1716
msgid "MMIX Internal: This is not a recognized address"
msgstr "MMIX 内部错误：这不是一个可识别的地址"

#: config/mmix/mmix.c:2649
msgid "MMIX Internal: Trying to output invalidly reversed condition:"
msgstr "MMIX 内部错误：试图输出无效地反转的条件："

#: config/mmix/mmix.c:2656
msgid "MMIX Internal: What's the CC of this?"
msgstr "MMIX 内部错误：它的比较条件是什么？"

#: config/mmix/mmix.c:2660
msgid "MMIX Internal: What is the CC of this?"
msgstr "MMIX 内部错误：它的比较条件是什么？"

#: config/mmix/mmix.c:2724
msgid "MMIX Internal: This is not a constant:"
msgstr "MMIX 内部错误：这不是一个常量："

#: config/mt/mt.c:299
msgid "mt_final_prescan_insn, invalid insn #1"
msgstr "mt_final_prescan_insn，无效指令 #1"

#: config/mt/mt.c:370
msgid "PRINT_OPERAND_ADDRESS, 2 regs"
msgstr "PRINT_OPERAND_ADDRESS，两个寄存器"

#: config/mt/mt.c:394
msgid "PRINT_OPERAND_ADDRESS, invalid insn #1"
msgstr "PRINT_OPERAND_ADDRESS，无效指令 #1"

#: config/rs6000/host-darwin.c:96
#, c-format
msgid "Out of stack space.\n"
msgstr "堆栈溢出。\n"

#: config/rs6000/host-darwin.c:117
#, c-format
msgid "Try running '%s' in the shell to raise its limit.\n"
msgstr "尝试在命令解释器中运行‘%s’以提升它的极限。\n"

#: config/rs6000/rs6000.c:10401
#, c-format
msgid "invalid %%f value"
msgstr "无效 %%f 值"

#: config/rs6000/rs6000.c:10410
#, c-format
msgid "invalid %%F value"
msgstr "无效 %%F 值"

#: config/rs6000/rs6000.c:10419
#, c-format
msgid "invalid %%G value"
msgstr "无效 %%G 值"

#: config/rs6000/rs6000.c:10454
#, c-format
msgid "invalid %%j code"
msgstr "无效 %%j 代码"

#: config/rs6000/rs6000.c:10464
#, c-format
msgid "invalid %%J code"
msgstr "无效 %%J 代码"

#: config/rs6000/rs6000.c:10474
#, c-format
msgid "invalid %%k value"
msgstr "无效 %%k 值"

#: config/rs6000/rs6000.c:10494 config/xtensa/xtensa.c:1697
#, c-format
msgid "invalid %%K value"
msgstr "无效 %%K 值"

#: config/rs6000/rs6000.c:10561
#, c-format
msgid "invalid %%O value"
msgstr "无效 %%O 值"

#: config/rs6000/rs6000.c:10608
#, c-format
msgid "invalid %%q value"
msgstr "无效 %%q 值"

#: config/rs6000/rs6000.c:10652
#, c-format
msgid "invalid %%S value"
msgstr "无效 %%S 值"

#: config/rs6000/rs6000.c:10692
#, c-format
msgid "invalid %%T value"
msgstr "无效 %%T 值"

#: config/rs6000/rs6000.c:10702
#, c-format
msgid "invalid %%u value"
msgstr "无效 %%u 值"

#: config/rs6000/rs6000.c:10711 config/xtensa/xtensa.c:1667
#, c-format
msgid "invalid %%v value"
msgstr "无效 %%v 值"

#: config/rs6000/rs6000.c:19557
msgid "AltiVec argument passed to unprototyped function"
msgstr "传递 AltiVec 实参给无原型的函数"

#: config/s390/s390.c:4533
#, c-format
msgid "cannot decompose address"
msgstr "无法分解地址"

#: config/s390/s390.c:4743
msgid "UNKNOWN in print_operand !?"
msgstr "UNKNOWN 出现在 print_operand 中？！"

#: config/score/score.c:1194
#, c-format
msgid "invalid operand for code: '%c'"
msgstr "代码‘%c’的操作数无效"

#: config/sh/sh.c:758
#, c-format
msgid "invalid operand to %%R"
msgstr "%%R 的操作数无效"

#: config/sh/sh.c:785
#, c-format
msgid "invalid operand to %%S"
msgstr "%%S 的操作数无效"

#: config/sh/sh.c:7828
msgid "created and used with different architectures / ABIs"
msgstr "创建和使用时使用了不同的架构/ABI"

#: config/sh/sh.c:7830
msgid "created and used with different ABIs"
msgstr "创建和使用时使用了不同的 ABI"

#: config/sh/sh.c:7832
msgid "created and used with different endianness"
msgstr "创建和使用时使用了不同的高/低位字节在前设定"

#: config/sparc/sparc.c:6714 config/sparc/sparc.c:6720
#, c-format
msgid "invalid %%Y operand"
msgstr "无效的 %%Y 操作数"

#: config/sparc/sparc.c:6790
#, c-format
msgid "invalid %%A operand"
msgstr "无效的 %%A 操作数"

#: config/sparc/sparc.c:6800
#, c-format
msgid "invalid %%B operand"
msgstr "无效的 %%B 操作数"

#: config/sparc/sparc.c:6839
#, c-format
msgid "invalid %%c operand"
msgstr "无效的 %%c 操作数"

#: config/sparc/sparc.c:6840
#, c-format
msgid "invalid %%C operand"
msgstr "无效的 %%C 操作数"

#: config/sparc/sparc.c:6861
#, c-format
msgid "invalid %%d operand"
msgstr "无效的 %%d 操作数"

#: config/sparc/sparc.c:6862
#, c-format
msgid "invalid %%D operand"
msgstr "无效的 %%D 操作数"

#: config/sparc/sparc.c:6878
#, c-format
msgid "invalid %%f operand"
msgstr "无效的 %%f 操作数"

#: config/sparc/sparc.c:6892
#, c-format
msgid "invalid %%s operand"
msgstr "无效的 %%s 操作数"

#: config/sparc/sparc.c:6946
#, c-format
msgid "long long constant not a valid immediate operand"
msgstr "long long 常量不是一个有效的立即数操作数"

#: config/sparc/sparc.c:6949
#, c-format
msgid "floating point constant not a valid immediate operand"
msgstr "浮点常量不是一个有效的立即数操作数"

#: config/stormy16/stormy16.c:1777 config/stormy16/stormy16.c:1848
#, c-format
msgid "'B' operand is not constant"
msgstr "‘B’操作数不是一个常量"

#: config/stormy16/stormy16.c:1804
#, c-format
msgid "'B' operand has multiple bits set"
msgstr "‘B’操作数设置了多个位"

#: config/stormy16/stormy16.c:1830
#, c-format
msgid "'o' operand is not constant"
msgstr "‘o’操作数不是一个常量"

#: config/stormy16/stormy16.c:1862
#, c-format
msgid "xstormy16_print_operand: unknown code"
msgstr "xstormy16_print_operand：未知代码"

#: config/v850/v850.c:371
msgid "const_double_split got a bad insn:"
msgstr "const_double_split 得到一个错误的指令："

#: config/v850/v850.c:935
msgid "output_move_single:"
msgstr "output_move_single："

#: config/xtensa/xtensa.c:751 config/xtensa/xtensa.c:783
#: config/xtensa/xtensa.c:792
msgid "bad test"
msgstr "错误的测试"

#: config/xtensa/xtensa.c:1655
#, c-format
msgid "invalid %%D value"
msgstr "无效的 %%D 值"

#: config/xtensa/xtensa.c:1692
msgid "invalid mask"
msgstr "无效掩码"

#: config/xtensa/xtensa.c:1718
#, c-format
msgid "invalid %%x value"
msgstr "无效的 %%x 值"

#: config/xtensa/xtensa.c:1725
#, c-format
msgid "invalid %%d value"
msgstr "无效的 %%d 值"

#: config/xtensa/xtensa.c:1746 config/xtensa/xtensa.c:1756
#, c-format
msgid "invalid %%t/%%b value"
msgstr "无效的 %%t/%%b 值"

#: config/xtensa/xtensa.c:1798
msgid "invalid address"
msgstr "无效地址"

#: config/xtensa/xtensa.c:1823
msgid "no register in address"
msgstr "地址中无寄存器"

#: config/xtensa/xtensa.c:1831
msgid "address offset not a constant"
msgstr "地址偏移量不是一个常量"

#: cp/call.c:2477
msgid "candidates are:"
msgstr "备选为："

#: cp/call.c:6344
msgid "candidate 1:"
msgstr "备选 1："

#: cp/call.c:6345
msgid "candidate 2:"
msgstr "备选 2："

#: cp/decl2.c:667
msgid "candidates are: %+#D"
msgstr "备选为：%+#D"

#: cp/decl2.c:669
msgid "candidate is: %+#D"
msgstr "备选为：%+#D"

#: cp/g++spec.c:237 java/jvspec.c:423
#, c-format
msgid "argument to '%s' missing\n"
msgstr "‘%s’缺少实参\n"

#: fortran/arith.c:140
msgid "Arithmetic OK at %L"
msgstr "%L 处算术正常"

#: fortran/arith.c:143
msgid "Arithmetic overflow at %L"
msgstr "%L 处算术上溢"

#: fortran/arith.c:146
msgid "Arithmetic underflow at %L"
msgstr "%L 处算术下溢"

#: fortran/arith.c:149
msgid "Arithmetic NaN at %L"
msgstr "%L 处算术 NaN"

#: fortran/arith.c:152
msgid "Division by zero at %L"
msgstr "%L 处被零除"

#: fortran/arith.c:155
msgid "Array operands are incommensurate at %L"
msgstr "%L 处数组操作数无法被使用"

#: fortran/arith.c:159
msgid "Integer outside symmetric range implied by Standard Fortran at %L"
msgstr "%L 处整数超出标准 Fortran 隐含的对称范围"

#: fortran/arith.c:1423
msgid "Elemental binary operation"
msgstr "基本的二元操作"

#: fortran/arith.c:1981
#, no-c-format
msgid "Arithmetic OK converting %s to %s at %L"
msgstr "从 %s 转换到 %s，在 %L 处：算术正常"

#: fortran/arith.c:1985
#, no-c-format
msgid "Arithmetic overflow converting %s to %s at %L"
msgstr "从 %s 转换到 %s，在 %L 处：算术上溢"

#: fortran/arith.c:1989
#, no-c-format
msgid "Arithmetic underflow converting %s to %s at %L"
msgstr "从 %s 转换到 %s，在 %L 处：算术下溢"

#: fortran/arith.c:1993
#, no-c-format
msgid "Arithmetic NaN converting %s to %s at %L"
msgstr "从 %s 转换到 %s，在 %L 处：算术 NaN"

#: fortran/arith.c:1997
#, no-c-format
msgid "Division by zero converting %s to %s at %L"
msgstr "从 %s 转换到 %s 时被零除，于 %L 处"

#: fortran/arith.c:2001
#, no-c-format
msgid "Array operands are incommensurate converting %s to %s at %L"
msgstr ""

#: fortran/arith.c:2005
#, no-c-format
msgid "Integer outside symmetric range implied by Standard Fortran converting %s to %s at %L"
msgstr ""

#: fortran/arith.c:2346 fortran/arith.c:2382 fortran/arith.c:2420
#: fortran/arith.c:2472
#, no-c-format
msgid "The Hollerith constant at %L is too long to convert to %s"
msgstr "%L 的荷勒瑞斯常数太长，无法被转换为 %s"

#: fortran/arith.c:2519
#, no-c-format
msgid "Enumerator exceeds the C integer type at %C"
msgstr "%C 处：枚举量超过 C 整数类型"

#: fortran/array.c:97
#, no-c-format
msgid "Expected array subscript at %C"
msgstr "%C 处需要数组下标"

#: fortran/array.c:124
#, no-c-format
msgid "Expected array subscript stride at %C"
msgstr "%C 需要数组下标间隔"

#: fortran/array.c:167
#, no-c-format
msgid "Invalid form of array reference at %C"
msgstr "%C 处数组引用形式无效"

#: fortran/array.c:172
#, no-c-format
msgid "Array reference at %C cannot have more than %d dimensions"
msgstr "%C 处的任何引用都不能多于 %d 维"

#: fortran/array.c:224
#, no-c-format
msgid "Variable '%s' at %L in this context must be constant"
msgstr "变量‘%s’在 %L 处上下文中必须是常量"

#: fortran/array.c:300
#, no-c-format
msgid "Expected expression in array specification at %C"
msgstr "%C 处指定数组时需要表达式"

#: fortran/array.c:388
#, no-c-format
msgid "Bad array specification for an explicitly shaped array at %C"
msgstr ""

#: fortran/array.c:399
#, no-c-format
msgid "Bad array specification for assumed shape array at %C"
msgstr ""

#: fortran/array.c:412
#, no-c-format
msgid "Bad specification for deferred shape array at %C"
msgstr ""

#: fortran/array.c:416
#, no-c-format
msgid "Bad specification for assumed size array at %C"
msgstr ""

#: fortran/array.c:425
#, no-c-format
msgid "Expected another dimension in array declaration at %C"
msgstr "%C 处数组声明需要另外一维"

#: fortran/array.c:431
#, no-c-format
msgid "Array specification at %C has more than %d dimensions"
msgstr "%C 处数组指定了多于 %d 的维数"

#: fortran/array.c:636
#, no-c-format
msgid "duplicated initializer"
msgstr "重复的初始值设定"

#: fortran/array.c:729
#, no-c-format
msgid "DO-iterator '%s' at %L is inside iterator of the same name"
msgstr "DO 游标‘%s’在 %L 处出现在另一个同名游标作用域内"

#: fortran/array.c:831 fortran/array.c:940
#, no-c-format
msgid "Syntax error in array constructor at %C"
msgstr "%C 数组构造语法错误"

#: fortran/array.c:886
#, no-c-format
msgid "New in Fortran 2003: [...] style array constructors at %C"
msgstr "Fortran 2003：%C 处 [...] 风格的数组构造"

#: fortran/array.c:900
#, no-c-format
msgid "Empty array constructor at %C is not allowed"
msgstr "%C 处的空数组构造不被允许"

#: fortran/array.c:985
#, no-c-format
msgid "Element in %s array constructor at %L is %s"
msgstr "%s 数组构造中的元素在 %L 处是 %s"

#: fortran/array.c:1314
#, no-c-format
msgid "Iterator step at %L cannot be zero"
msgstr "%L 处游标步进不能为零"

#: fortran/check.c:44
#, no-c-format
msgid "'%s' argument of '%s' intrinsic at %L must be %s"
msgstr "实参‘%s’(属于内建函数‘%s’，位于 %L)必须是 %s"

#: fortran/check.c:60
#, no-c-format
msgid "'%s' argument of '%s' intrinsic at %L must be a numeric type"
msgstr "实参‘%s’(属于内建函数‘%s’，位于 %L)必须具有数字类型"

#: fortran/check.c:75 fortran/check.c:767 fortran/check.c:777
#, no-c-format
msgid "'%s' argument of '%s' intrinsic at %L must be INTEGER or REAL"
msgstr "实参‘%s’(属于内建函数‘%s’，位于 %L)必须为整数型或实数型"

#: fortran/check.c:92
#, no-c-format
msgid "'%s' argument of '%s' intrinsic at %L must be REAL or COMPLEX"
msgstr "实参‘%s’(属于内建函数‘%s’，位于 %L)必须为实数型或复数型"

#: fortran/check.c:118
#, no-c-format
msgid "'%s' argument of '%s' intrinsic at %L must be a constant"
msgstr "实参‘%s’(属于内建函数‘%s’，位于 %L)必须是一个常量"

#: fortran/check.c:126
#, no-c-format
msgid "Invalid kind for %s at %L"
msgstr "%s 种别无效，于 %L 处"

#: fortran/check.c:146
#, no-c-format
msgid "'%s' argument of '%s' intrinsic at %L must be double precision"
msgstr "实参‘%s’(属于内建函数‘%s’，位于 %L)必须为双精度"

#: fortran/check.c:163
#, no-c-format
msgid "'%s' argument of '%s' intrinsic at %L must be a logical array"
msgstr "实参‘%s’(属于内建函数‘%s’，位于 %L)必须是一个逻辑数组"

#: fortran/check.c:180
#, no-c-format
msgid "'%s' argument of '%s' intrinsic at %L must be an array"
msgstr "实参‘%s’(属于内建函数‘%s’，位于 %L)必须是一个数组"

#: fortran/check.c:195
#, no-c-format
msgid "'%s' argument of '%s' intrinsic at %L must be a scalar"
msgstr "实参‘%s’(属于内建函数‘%s’，位于 %L)必须是一个标量"

#: fortran/check.c:210
#, no-c-format
msgid "'%s' argument of '%s' intrinsic at %L must be the same type and kind as '%s'"
msgstr "实参‘%s’(属于内建函数‘%s’，位于 %L)必须具有与‘%s’一样的类型和种别"

#: fortran/check.c:225
#, no-c-format
msgid "'%s' argument of '%s' intrinsic at %L must be of rank %d"
msgstr "实参‘%s’(属于内建函数‘%s’，位于 %L)的秩必须为 %d"

#: fortran/check.c:239
#, no-c-format
msgid "'%s' argument of '%s' intrinsic at %L must not be OPTIONAL"
msgstr "实参‘%s’(属于内建函数‘%s’，位于 %L)不能为可选的"

#: fortran/check.c:259
#, no-c-format
msgid "'%s' argument of '%s' intrinsic at %L must be of kind %d"
msgstr "实参‘%s’(属于内建函数‘%s’，位于 %L)必须具有种别 %d"

#: fortran/check.c:280
#, no-c-format
msgid "'%s' argument of '%s' intrinsic at %L cannot be INTENT(IN)"
msgstr "‘%s’实参(属于内建函数‘%s’)在 %L 处不能是 INTENT(IN)"

#: fortran/check.c:286
#, no-c-format
msgid "'%s' argument of '%s' intrinsic at %L must be a variable"
msgstr "实参‘%s’(属于内建函数‘%s’，位于 %L)必须是一个变量"

#: fortran/check.c:303
#, no-c-format
msgid "Missing DIM parameter in intrinsic '%s' at %L"
msgstr "内建函数‘%s’在 %L 处缺少 DIM 参数"

#: fortran/check.c:343
#, no-c-format
msgid "'dim' argument of '%s' intrinsic at %L is not a valid dimension index"
msgstr "‘%s’内建函数的‘dim’实参(于 %L 处)不是一个有效的维数索引"

#: fortran/check.c:387
#, fuzzy, no-c-format
msgid "transformational intrinsic '%s' at %L is not permitted in an initialization expression"
msgstr "KIND 参数 %s 在 %L 处必须是初始化表达式"

#: fortran/check.c:491 fortran/check.c:1840 fortran/check.c:1855
#, no-c-format
msgid "'%s' argument of '%s' intrinsic at %L must be ALLOCATABLE"
msgstr "实参‘%s’(属于内建函数‘%s’，位于 %L)必须为 ALLOCATABLE"

#: fortran/check.c:512 fortran/check.c:3484
#, no-c-format
msgid "'%s' and '%s' arguments of '%s' intrinsic at %L must have the same type"
msgstr "‘%s’和‘%s’实参(属于‘%s’内建函数)在 %L 处类型必须相同"

#: fortran/check.c:521 fortran/check.c:1069 fortran/check.c:1204
#: fortran/check.c:1277 fortran/check.c:1508
#, no-c-format
msgid "Extension: Different type kinds at %L"
msgstr "扩展：%L 处类型种别不同"

#: fortran/check.c:551 fortran/check.c:1921
#, no-c-format
msgid "'%s' argument of '%s' intrinsic at %L must be a POINTER"
msgstr "实参‘%s’(属于内建函数‘%s’，位于 %L)必须是一个 POINTER"

#: fortran/check.c:571
#, fuzzy, no-c-format
msgid "'%s' argument of '%s' intrinsic at %L must be a pointer or target VARIABLE or FUNCTION"
msgstr "‘%s’实参(属于内建函数‘%s’，于 %L 处)的类型必须为 REAL 或 COMPLEX"

#: fortran/check.c:579
#, no-c-format
msgid "'%s' argument of '%s' intrinsic at %L must be a POINTER or a TARGET"
msgstr "实参‘%s’(属于内建函数‘%s’，位于 %L)必须是一个 POINTER 或 TARGET"

#: fortran/check.c:595
#, no-c-format
msgid "Array section with a vector subscript at %L shall not be the target of a pointer"
msgstr "%L 处由矢量下标选择的部分数组不应是指针的目标"

#: fortran/check.c:606
#, no-c-format
msgid "NULL pointer at %L is not permitted as actual argument of '%s' intrinsic function"
msgstr "%L 的 NULL 指针不能用作内建函数‘%s’的实参"

#: fortran/check.c:747 fortran/check.c:855
#, no-c-format
msgid "'%s' argument of '%s' intrinsic at %L must not be present if 'x' is COMPLEX"
msgstr "当‘x’是 COMPLEX 时‘%s’实参(属于‘%s’内建函数，在 %L 处)不能存在"

#: fortran/check.c:904 fortran/check.c:1588 fortran/check.c:1596
#, no-c-format
msgid "'%s' argument of '%s' intrinsic at %L must be numeric or LOGICAL"
msgstr "实参‘%s’(属于内建函数‘%s’，位于 %L)必须为数字或 LOGICAL 型"

#: fortran/check.c:918
#, no-c-format
msgid "different shape for arguments '%s' and '%s' at %L for intrinsic 'dot_product'"
msgstr ""

#: fortran/check.c:1174
#, no-c-format
msgid "Argument of %s at %L must be of length one"
msgstr "%s 的参数(位于 %L)长度必须为 1"

#: fortran/check.c:1226
#, no-c-format
msgid "'%s' argument of '%s' intrinsic at %L must be the same kind as '%s'"
msgstr "实参‘%s’(属于内建函数‘%s’，位于 %L)必须具有与‘%s’一样的种别"

#: fortran/check.c:1357
#, no-c-format
msgid "'%s' argument of '%s' intrinsic at %L must be a non-derived type"
msgstr "实参‘%s’(属于内建函数‘%s’，位于 %L)不能是派生类型"

#: fortran/check.c:1480
#, no-c-format
msgid "Intrinsic '%s' at %L must have at least two arguments"
msgstr "内建函数‘%s’ 于 %L 处必须有至少两个实参"

#: fortran/check.c:1514
#, no-c-format
msgid "'a%d' argument of '%s' intrinsic at %L must be %s(%d)"
msgstr "实参‘%s’(属于内建函数‘%s’，位于 %L)必须是 %s(%d)"

#: fortran/check.c:1539
#, no-c-format
msgid "'a1' argument of '%s' intrinsic at %L must be INTEGER or REAL"
msgstr "‘%s’内建函数的‘a1’实参在 %L 处必须是 INTEGER 或 REAL"

#: fortran/check.c:1610
#, no-c-format
msgid "different shape on dimension 1 for arguments '%s' and '%s' at %L for intrinsic matmul"
msgstr ""

#: fortran/check.c:1630
#, no-c-format
msgid "different shape on dimension 2 for argument '%s' and dimension 1 for argument '%s' at %L for intrinsic matmul"
msgstr ""

#: fortran/check.c:1639
#, no-c-format
msgid "'%s' argument of '%s' intrinsic at %L must be of rank 1 or 2"
msgstr "实参‘%s’(属于内建函数‘%s’，位于 %L)的秩必须为 1 或 2"

#: fortran/check.c:1866
#, no-c-format
msgid "the '%s' and '%s' arguments of '%s' intrinsic at %L must have the same rank %d/%d"
msgstr "‘%s’和‘%s’实参(属于‘%s’内建函数)在 %L 处必须有相同的秩 %d/%d"

#: fortran/check.c:1875
#, no-c-format
msgid "the '%s' and '%s' arguments of '%s' intrinsic at %L must be of the same kind %d/%d"
msgstr "‘%s’和‘%s’实参(属于‘%s’内建函数)在 %L 处必须有相同的种别 %d/%d"

#: fortran/check.c:1971
#, no-c-format
msgid "'%s' argument of '%s' intrinsic at %L must be of type REAL or COMPLEX"
msgstr "‘%s’实参(属于内建函数‘%s’，于 %L 处)的类型必须为 REAL 或 COMPLEX"

#: fortran/check.c:1992
#, no-c-format
msgid "'%s' argument of '%s' intrinsic at %L must be of a dummy variable"
msgstr "实参‘%s’(属于内建函数‘%s’，位于 %L)必须是一个哑元变量"

#: fortran/check.c:2000
#, no-c-format
msgid "'%s' argument of '%s' intrinsic at %L must be of an OPTIONAL dummy variable"
msgstr "‘%s’实参(属于‘%s’内建函数，位于 %L)必须是一个 OPTIONAL 哑变量"

#: fortran/check.c:2016
#, fuzzy, no-c-format
msgid "'%s' argument of '%s' intrinsic at %L must not be a sub-object of '%s'"
msgstr "当‘x’是 COMPLEX 时‘%s’实参(属于‘%s’内建函数，在 %L 处)不能存在"

#: fortran/check.c:2133
#, no-c-format
msgid "'shape' argument of 'reshape' intrinsic at %L must be an array of constant size"
msgstr "‘reshape’内建函数的‘shape’实参在 %L 处必须是大小为常量的数组"

#: fortran/check.c:2143
#, no-c-format
msgid "'shape' argument of 'reshape' intrinsic at %L has more than %d elements"
msgstr "‘reshape’内建函数的‘shape’实参在 %L 处有多于 %d 个的元素"

#: fortran/check.c:2183
#, no-c-format
msgid "Without padding, there are not enough elements in the intrinsic RESHAPE source at %L to match the shape"
msgstr ""

#: fortran/check.c:2263
#, no-c-format
msgid "Missing arguments to %s intrinsic at %L"
msgstr "%s 内建函数缺少实参，于 %L 处"

#: fortran/check.c:2304
#, no-c-format
msgid "'source' argument of 'shape' intrinsic at %L must not be an assumed size array"
msgstr "‘shape’内建函数的‘source’实参在 %L 处不能是假定大小的数组"

#: fortran/check.c:2366
#, no-c-format
msgid "'%s' argument of '%s' intrinsic at %L must be less than rank %d"
msgstr "实参‘%s’(属于内建函数‘%s’，位于 %L)秩必须小于 %d"

#: fortran/check.c:2832 fortran/check.c:2852
#, no-c-format
msgid "Too many arguments to %s at %L"
msgstr "给予函数 %s 的参数太多，于 %L"

#: fortran/check.c:2980 fortran/check.c:3398 fortran/check.c:3422
#, no-c-format
msgid "'%s' argument of '%s' intrinsic at %L must be INTEGER or PROCEDURE"
msgstr "实参‘%s’(属于内建函数‘%s’，位于 %L)必须为 INTEGER 或 PROCEDURE"

#: fortran/check.c:3469 fortran/check.c:3477
#, no-c-format
msgid "'%s' argument of '%s' intrinsic at %L must be INTEGER or LOGICAL"
msgstr "实参‘%s’(属于内建函数‘%s’，位于 %L)必须为 INTEGER 或 LOGICAL"

#: fortran/data.c:63
#, no-c-format
msgid "non-constant array in DATA statement %L."
msgstr "%L DATA 语句中有非常量数组"

#: fortran/data.c:183
#, no-c-format
msgid "failure to simplify substring reference in DATAstatement at %L"
msgstr ""

#: fortran/data.c:204
#, no-c-format
msgid "initialization string truncated to match variable at %L"
msgstr "初始化字符串被截断，以匹配 %L 处的变量"

#: fortran/data.c:355
#, no-c-format
msgid "Extension: re-initialization of '%s' at %L"
msgstr "扩展：‘%s’重初始化于 %L"

#: fortran/decl.c:222
#, no-c-format
msgid "Host associated variable '%s' may not be in the DATA statement at %C."
msgstr ""

#: fortran/decl.c:229
#, no-c-format
msgid "Extension: initialization of common block variable '%s' in DATA statement at %C"
msgstr "扩展：DATA 语句中对公共块变量‘%s’在 %C 处初始化"

#: fortran/decl.c:315
#, no-c-format
msgid "Symbol '%s' must be a PARAMETER in DATA statement at %C"
msgstr "DATA 语句中符号‘%s’必须是一个 PARAMETER，在 %C 处"

#: fortran/decl.c:425
#, no-c-format
msgid "Initialization at %C is not allowed in a PURE procedure"
msgstr "初始化不允许出现在 %C 处的 PURE 过程中"

#: fortran/decl.c:483
#, no-c-format
msgid "DATA statement at %C is not allowed in a PURE procedure"
msgstr "DATA 语句不允许出现在 %C 处的 PURE 过程中"

#: fortran/decl.c:512
#, no-c-format
msgid "Bad INTENT specification at %C"
msgstr "%C 处错误地指定 INTENT"

#: fortran/decl.c:576
#, no-c-format
msgid "Syntax error in character length specification at %C"
msgstr "%C 处指定字符长度时语法错误"

#: fortran/decl.c:659
#, no-c-format
msgid "Procedure '%s' at %C is already defined at %L"
msgstr "进程‘%s’在 %C 处已经在 %L 处被定义"

#: fortran/decl.c:671
#, fuzzy, no-c-format
msgid "Procedure '%s' at %C has an explicit interface and must not have attributes declared at %L"
msgstr "调用过程‘%s’带隐式接口，位于 %L"

#: fortran/decl.c:764
#, no-c-format
msgid "CHARACTER expression at %L is being truncated (%d/%d)"
msgstr "CHARACTER 表达式在 %L 处被截断(%d/%d)"

#: fortran/decl.c:770
#, no-c-format
msgid "The CHARACTER elements of the array constructor at %L must have the same length (%d/%d)"
msgstr ""

#: fortran/decl.c:861
#, no-c-format
msgid "Initializer not allowed for PARAMETER '%s' at %C"
msgstr "PARAMETER‘%s’在 %C 处不允许有初始值设定"

#: fortran/decl.c:870
#, no-c-format
msgid "Initializer not allowed for COMMON variable '%s' at %C"
msgstr "COMMON 变量‘%s’在 %C 处不允许有初始值设定"

#: fortran/decl.c:880
#, no-c-format
msgid "PARAMETER at %L is missing an initializer"
msgstr "%L 处 PARAMETER 缺少初始值设定"

#: fortran/decl.c:891
#, no-c-format
msgid "Variable '%s' at %C with an initializer already appears in a DATA statement"
msgstr ""

#: fortran/decl.c:968
#, no-c-format
msgid "Component at %C must have the POINTER attribute"
msgstr "%C 处的组件必须有 POINTER 属性"

#: fortran/decl.c:977
#, no-c-format
msgid "Array component of structure at %C must have explicit or deferred shape"
msgstr ""

#: fortran/decl.c:1003
#, no-c-format
msgid "Allocatable component at %C must be an array"
msgstr "%C 处可分配的组件必须是一个数组"

#: fortran/decl.c:1014
#, no-c-format
msgid "Pointer array component of structure at %C must have a deferred shape"
msgstr ""

#: fortran/decl.c:1023
#, no-c-format
msgid "Allocatable component of structure at %C must have a deferred shape"
msgstr "%C 处可分配的组件必须有延迟的外形"

#: fortran/decl.c:1033
#, no-c-format
msgid "Array component of structure at %C must have an explicit shape"
msgstr ""

#: fortran/decl.c:1059
#, no-c-format
msgid "NULL() initialization at %C is ambiguous"
msgstr "%C 处的 NULL() 初始化有歧义"

#: fortran/decl.c:1179 fortran/decl.c:3448
#, no-c-format
msgid "Duplicate array spec for Cray pointee at %C."
msgstr ""

#: fortran/decl.c:1232
#, fuzzy, no-c-format
msgid "the type of '%s' at %C has not been declared within the interface"
msgstr "%qD不能在命名空间声明"

#: fortran/decl.c:1247
#, no-c-format
msgid "Function name '%s' not allowed at %C"
msgstr "函数名‘%s’不允许出现在 %C 处"

#: fortran/decl.c:1263
#, no-c-format
msgid "Extension: Old-style initialization at %C"
msgstr "扩展：%C 处旧式的初始化"

#: fortran/decl.c:1279
#, no-c-format
msgid "Initialization at %C isn't for a pointer variable"
msgstr "%C 的初始化不是为指针变量准备的"

#: fortran/decl.c:1287
#, no-c-format
msgid "Pointer initialization requires a NULL() at %C"
msgstr "%C 处的指针初始化需要 NULL()"

#: fortran/decl.c:1294
#, no-c-format
msgid "Initialization of pointer at %C is not allowed in a PURE procedure"
msgstr "%C 处对指针的初始化不允许出现在 PURE 过程中"

#: fortran/decl.c:1308
#, no-c-format
msgid "Pointer initialization at %C requires '=>', not '='"
msgstr "在 %C 处的指针初始化需要‘=>’，而不是‘=’"

#: fortran/decl.c:1316 fortran/decl.c:4164
#, no-c-format
msgid "Expected an initialization expression at %C"
msgstr "%C 处需要一个初始化表达式"

#: fortran/decl.c:1323
#, no-c-format
msgid "Initialization of variable at %C is not allowed in a PURE procedure"
msgstr "%C 处对变量的初始化不允许出现在 PURE 过程中"

#: fortran/decl.c:1336
#, fuzzy, no-c-format
msgid "Initialization of allocatable component at %C is not allowed"
msgstr "初始化不允许出现在 %C 处的 PURE 过程中"

#: fortran/decl.c:1390 fortran/decl.c:1399
#, no-c-format
msgid "Old-style type declaration %s*%d not supported at %C"
msgstr "旧式的类型声明 %s*%d 于 %C 处不受支持"

#: fortran/decl.c:1404
#, no-c-format
msgid "Nonstandard type declaration %s*%d at %C"
msgstr "不符合标准的 %s*%d 类型声明，于 %C 处"

#: fortran/decl.c:1438
#, no-c-format
msgid "Expected initialization expression at %C"
msgstr "%C 处需要初始化表达式"

#: fortran/decl.c:1444
#, no-c-format
msgid "Expected scalar initialization expression at %C"
msgstr "%C 处需要标量初始化表达式"

#: fortran/decl.c:1462
#, no-c-format
msgid "Kind %d not supported for type %s at %C"
msgstr "种别 %d 在 %C 处 不为类型 %s 所支持"

#: fortran/decl.c:1471
#, no-c-format
msgid "Missing right paren at %C"
msgstr "%C 处缺少右括号"

#: fortran/decl.c:1560 fortran/decl.c:1603
#, no-c-format
msgid "Kind %d is not a CHARACTER kind at %C"
msgstr "种别 %d 在 %C 处不是 CHARACTER 种别"

#: fortran/decl.c:1597
#, no-c-format
msgid "Syntax error in CHARACTER declaration at %C"
msgstr "%C 的 CHARACTER 声明语法错误"

#: fortran/decl.c:1658
#, no-c-format
msgid "Extension: BYTE type at %C"
msgstr "扩展：%C 处的 BYTE 类型"

#: fortran/decl.c:1664
#, no-c-format
msgid "BYTE type used at %C is not available on the target machine"
msgstr "%C 使用到的 BYTE 类型在目标机上不可"

#: fortran/decl.c:1713
#, no-c-format
msgid "DOUBLE COMPLEX at %C does not conform to the Fortran 95 standard"
msgstr "%C 处的 DOUBLE COMPLEX 不遵循 Fortran 95 标准"

#: fortran/decl.c:1736
#, no-c-format
msgid "Type name '%s' at %C is ambiguous"
msgstr "类型名‘%s’(于 %C 处)有歧义"

#: fortran/decl.c:1802
#, no-c-format
msgid "Missing character range in IMPLICIT at %C"
msgstr "%C 处 IMPLICIT 缺少字符范围"

#: fortran/decl.c:1848
#, no-c-format
msgid "Letters must be in alphabetic order in IMPLICIT statement at %C"
msgstr "%C 处 IMPLICIT 语句中的字母必须按序排列"

#: fortran/decl.c:1902
#, no-c-format
msgid "Empty IMPLICIT statement at %C"
msgstr "%C IMPLICIT 语句为空"

#: fortran/decl.c:2073
#, no-c-format
msgid "Missing dimension specification at %C"
msgstr "%C 处没有指定维数"

#: fortran/decl.c:2143
#, no-c-format
msgid "Duplicate %s attribute at %L"
msgstr "重复的 %s 属性，位于 %L"

#: fortran/decl.c:2162
#, no-c-format
msgid "In the selected standard, the ALLOCATABLE attribute at %C is not allowed in a TYPE definition"
msgstr ""

#: fortran/decl.c:2172
#, no-c-format
msgid "Attribute at %L is not allowed in a TYPE definition"
msgstr "%L 处的属性不允许出现在 TYPE 定义中"

#: fortran/decl.c:2187
#, no-c-format
msgid "%s attribute at %L is not allowed outside of a MODULE"
msgstr "%s 属性(位于 %L)不允许出现在 MODULE 以外"

#. Now we have an error, which we signal, and then fix up
#. because the knock-on is plain and simple confusing.
#: fortran/decl.c:2325
#, no-c-format
msgid "Derived type at %C has not been previously defined and so cannot appear in a derived type definition."
msgstr "%C 处的派生类型尚未被定义，因此不能出现在派生类型定义中"

#: fortran/decl.c:2356
#, no-c-format
msgid "Syntax error in data declaration at %C"
msgstr "%C 处数据声明语法错误"

#: fortran/decl.c:2502
#, no-c-format
msgid "Name '%s' at %C is the name of the procedure"
msgstr "名字‘%s’(位于 %C)是一个过程的名字"

#: fortran/decl.c:2514
#, no-c-format
msgid "Unexpected junk in formal argument list at %C"
msgstr "%C 处形参列表中有非预期的垃圾字符"

#: fortran/decl.c:2532
#, no-c-format
msgid "Duplicate symbol '%s' in formal argument list at %C"
msgstr "符号‘%s’在 %C 处的形参列表中重复出现"

#: fortran/decl.c:2575
#, no-c-format
msgid "Unexpected junk following RESULT variable at %C"
msgstr "%C 处的 RESULT 变量后有非预期的垃圾字符"

#: fortran/decl.c:2582
#, no-c-format
msgid "RESULT variable at %C must be different than function name"
msgstr "%C 处 RESULT 变量不能与函数重名"

#: fortran/decl.c:2638
#, no-c-format
msgid "Expected formal argument list in function definition at %C"
msgstr ""

#: fortran/decl.c:2653
#, no-c-format
msgid "Unexpected junk after function declaration at %C"
msgstr "%C 处的函数声明后有非预期的垃圾字符"

#: fortran/decl.c:2676
#, no-c-format
msgid "Function '%s' at %C already has a type of %s"
msgstr "函数‘%s’(位于 %C)已经具有类型 %s"

#: fortran/decl.c:2748
#, no-c-format
msgid "ENTRY statement at %C cannot appear within a PROGRAM"
msgstr "%C 处的 ENTRY 语句不能出现在 PROGRAM 中"

#: fortran/decl.c:2751
#, no-c-format
msgid "ENTRY statement at %C cannot appear within a MODULE"
msgstr "%C 处的 ENTRY 语句不能出现在 MODULE 中"

#: fortran/decl.c:2755
#, no-c-format
msgid "ENTRY statement at %C cannot appear within a BLOCK DATA"
msgstr "%C 处的 ENTRY 语句不能出现在 BLOCK DATA 中"

#: fortran/decl.c:2759
#, no-c-format
msgid "ENTRY statement at %C cannot appear within an INTERFACE"
msgstr "%C 处的 ENTRY 语句不能出现在 INTERFACE 中"

#: fortran/decl.c:2763
#, no-c-format
msgid "ENTRY statement at %C cannot appear within a DERIVED TYPE block"
msgstr "%C 处的 ENTRY 语句不能出现在 DERIVED TYPE 块中"

#: fortran/decl.c:2768
#, no-c-format
msgid "ENTRY statement at %C cannot appear within an IF-THEN block"
msgstr "%C 处的 ENTRY 语句不能出现在 IF-THEN 块中"

#: fortran/decl.c:2772
#, no-c-format
msgid "ENTRY statement at %C cannot appear within a DO block"
msgstr "%C 处的 ENTRY 语句不能出现在 DO 中"

#: fortran/decl.c:2776
#, no-c-format
msgid "ENTRY statement at %C cannot appear within a SELECT block"
msgstr "%C 处的 ENTRY 语句不能出现在 SELECT 块中"

#: fortran/decl.c:2780
#, no-c-format
msgid "ENTRY statement at %C cannot appear within a FORALL block"
msgstr "%C 处的 ENTRY 语句不能出现在 FORALL 块中"

#: fortran/decl.c:2784
#, no-c-format
msgid "ENTRY statement at %C cannot appear within a WHERE block"
msgstr "%C 处的 ENTRY 语句不能出现在 WHERE 块中"

#: fortran/decl.c:2788
#, no-c-format
msgid "ENTRY statement at %C cannot appear within a contained subprogram"
msgstr "%C 处的 ENTRY 语句不能出现在嵌套的子程序中"

#: fortran/decl.c:2805
#, no-c-format
msgid "ENTRY statement at %C cannot appear in a contained procedure"
msgstr "%C 处 ENTRY 语句不能出现在被包含的过程中"

#: fortran/decl.c:3127
#, no-c-format
msgid "Unexpected END statement at %C"
msgstr "%C 处非预期的 END 语句"

#. We would have required END [something]
#: fortran/decl.c:3136
#, no-c-format
msgid "%s statement expected at %L"
msgstr "需要 %s 语句在 %L 处"

#: fortran/decl.c:3147
#, no-c-format
msgid "Expecting %s statement at %C"
msgstr "需要 %s 语句，于 %C"

#: fortran/decl.c:3161
#, no-c-format
msgid "Expected block name of '%s' in %s statement at %C"
msgstr "需要块名‘%s’在‘%s’表达式中，于 %C"

#: fortran/decl.c:3177
#, no-c-format
msgid "Expected terminating name at %C"
msgstr "%C 处需要结束名"

#: fortran/decl.c:3186
#, no-c-format
msgid "Expected label '%s' for %s statement at %C"
msgstr "需要标号‘%s’，为 %s 语句，于 %C"

#: fortran/decl.c:3241
#, no-c-format
msgid "Missing array specification at %L in DIMENSION statement"
msgstr ""

#: fortran/decl.c:3250
#, no-c-format
msgid "Array specification must be deferred at %L"
msgstr "%L 处数组指定必须延迟"

#: fortran/decl.c:3327
#, no-c-format
msgid "Unexpected character in variable list at %C"
msgstr "%C 处变量列表中有非预期的垃圾字符"

#: fortran/decl.c:3364
#, no-c-format
msgid "Expected '(' at %C"
msgstr "在 %C 处需要‘(’"

#: fortran/decl.c:3378 fortran/decl.c:3419
#, no-c-format
msgid "Expected variable name at %C"
msgstr "在 %C 处需要变量名"

#: fortran/decl.c:3394
#, no-c-format
msgid "Cray pointer at %C must be an integer."
msgstr "%C 处 Cray 指针必须是一个整数。"

#: fortran/decl.c:3398
#, no-c-format
msgid "Cray pointer at %C has %d bytes of precision; memory addresses require %d bytes."
msgstr "%C 处的 Cray 指针精度为 %d；内存地址需要 %d 字节"

#: fortran/decl.c:3405
#, no-c-format
msgid "Expected \",\" at %C"
msgstr "在 %C 处需要“,”"

#: fortran/decl.c:3468
#, no-c-format
msgid "Expected \")\" at %C"
msgstr "在 %C 处需要“)”"

#: fortran/decl.c:3480
#, no-c-format
msgid "Expected \",\" or end of statement at %C"
msgstr "在 %C 处需要“,”或语句尾"

#: fortran/decl.c:3545
#, no-c-format
msgid "Cray pointer declaration at %C requires -fcray-pointer flag."
msgstr "%C 处的 Cray 指针声明需要 -fcray-pointer 标记。"

#: fortran/decl.c:3643
#, no-c-format
msgid "Access specification of the %s operator at %C has already been specified"
msgstr ""

#: fortran/decl.c:3661
#, no-c-format
msgid "Access specification of the .%s. operator at %C has already been specified"
msgstr ""

#: fortran/decl.c:3748
#, no-c-format
msgid "Expected variable name at %C in PARAMETER statement"
msgstr "%C 处的 PARAMETER 语句需要变量名"

#: fortran/decl.c:3755
#, no-c-format
msgid "Expected = sign in PARAMETER statement at %C"
msgstr "%C 在 PARAMETER 语句中需要 = 符号"

#: fortran/decl.c:3761
#, no-c-format
msgid "Expected expression at %C in PARAMETER statement"
msgstr "%C 在 PARAMETER 语句中需要表达式"

#: fortran/decl.c:3819
#, no-c-format
msgid "Unexpected characters in PARAMETER statement at %C"
msgstr "%C 处 PARAMETER 语句中有非预期的字符"

#: fortran/decl.c:3844
#, no-c-format
msgid "Blanket SAVE statement at %C follows previous SAVE statement"
msgstr ""

#: fortran/decl.c:3857
#, no-c-format
msgid "SAVE statement at %C follows blanket SAVE statement"
msgstr "%C 处 SAVE 语句跟随空白 SAVE 语句"

#: fortran/decl.c:3903
#, no-c-format
msgid "Syntax error in SAVE statement at %C"
msgstr "%C SAVE 语句语法错误"

#: fortran/decl.c:3924
#, no-c-format
msgid "MODULE PROCEDURE at