# Chinese (simplified) translation about gst-plugins-good.
# This file is put in the public domain.
# Funda Wang <fundawang@linux.net.cn>, 2005.
# Ji ZhengYu <zhengyuji@gmail.com>, 2008
#
msgid ""
msgstr ""
"Project-Id-Version: gst-plugins-good 0.10.9.2\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2008-08-11 23:36+0100\n"
"PO-Revision-Date: 2008-08-13 21:55中国标准时间\n"
"Last-Translator: Ji ZhengYu <zhengyuji@gmail.com>\n"
"Language-Team: Chinese (simplified) <i18n-zh@googlegroups.com>\n"
"X-Bugs: Report translation errors to the Language-Team address.\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=utf-8\n"
"Content-Transfer-Encoding: 8bit\n"

#: ext/esd/esdsink.c:262 ext/esd/esdsink.c:367
msgid "Could not establish connection to sound server"
msgstr "无法建立与音频服务器的连接"

#: ext/esd/esdsink.c:269
msgid "Failed to query sound server capabilities"
msgstr "查寻音频服务器的服务失败"

#: ext/flac/gstflacdec.c:1254 ext/libpng/gstpngdec.c:329
#: ext/libpng/gstpngdec.c:517 ext/wavpack/gstwavpackparse.c:1167
#: gst/avi/gstavidemux.c:4114 gst/avi/gstavidemux.c:4122
msgid "Internal data stream error."
msgstr "内部数据流错误。"

#: ext/jpeg/gstjpegdec.c:1041
msgid "Failed to decode JPEG image"
msgstr "解码 JPEG 图像出错"

#: ext/shout2/gstshout2.c:558
msgid "Could not connect to server"
msgstr "无法连接至服务器"

#: gst/avi/gstavimux.c:1605
msgid "No or invalid input audio, AVI stream will be corrupt."
msgstr "没有或无效的输入音频，AVI 流将损坏。"

#: gst/qtdemux/qtdemux.c:1113
msgid "This file is incomplete and cannot be played."
msgstr "此文件不完整且无法播放。"

#: gst/qtdemux/qtdemux.c:1935
msgid "This file contains no playable streams."
msgstr "此文件不包含可播放的流。"

#: gst/qtdemux/qtdemux.c:2780
msgid "The video in this file might not play correctly."
msgstr "此文件中的视频可能无法正确播放。"

#: gst/qtdemux/qtdemux.c:2855
#, c-format
msgid "This file contains too many streams. Only playing first %d"
msgstr "此文件包含了太多的流。只播放前面 %d 个"

#: gst/qtdemux/qtdemux.c:3117 gst/qtdemux/qtdemux.c:3714
msgid "This file is corrupt and cannot be played."
msgstr "此文件已损坏，无法播放。"

#: gst/wavparse/gstwavparse.c:1777
msgid "Internal data flow error."
msgstr "内部数据流错误。"

#: sys/oss/gstossmixertrack.c:98 sys/sunaudio/gstsunaudiomixertrack.c:65
msgid "Volume"
msgstr "音量"

#: sys/oss/gstossmixertrack.c:99
msgid "Bass"
msgstr "低音(Bass)"

#: sys/oss/gstossmixertrack.c:100
msgid "Treble"
msgstr "高音(Treble)"

#: sys/oss/gstossmixertrack.c:101
msgid "Synth"
msgstr "合成器"

#: sys/oss/gstossmixertrack.c:102
msgid "PCM"
msgstr "波形(PCM)"

#: sys/oss/gstossmixertrack.c:103
msgid "Speaker"
msgstr "扬声器(Speaker)"

#: sys/oss/gstossmixertrack.c:104
msgid "Line-in"
msgstr "线路输入(Line-in)"

#: sys/oss/gstossmixertrack.c:105
msgid "Microphone"
msgstr "话筒"

#: sys/oss/gstossmixertrack.c:106
msgid "CD"
msgstr "CD 音频"

#: sys/oss/gstossmixertrack.c:107
msgid "Mixer"
msgstr "混音器"

#: sys/oss/gstossmixertrack.c:108
msgid "PCM-2"
msgstr "PCM-2"

#: sys/oss/gstossmixertrack.c:109
msgid "Record"
msgstr "录音"

#: sys/oss/gstossmixertrack.c:110
msgid "In-gain"
msgstr "输入增益"

#: sys/oss/gstossmixertrack.c:111
msgid "Out-gain"
msgstr "输出增益"

#: sys/oss/gstossmixertrack.c:112
msgid "Line-1"
msgstr "线路1"

#: sys/oss/gstossmixertrack.c:113
msgid "Line-2"
msgstr "线路2"

#: sys/oss/gstossmixertrack.c:114
msgid "Line-3"
msgstr "线路3"

#: sys/oss/gstossmixertrack.c:115
msgid "Digital-1"
msgstr "数字线路1"

#: sys/oss/gstossmixertrack.c:116
msgid "Digital-2"
msgstr "数字线路2"

#: sys/oss/gstossmixertrack.c:117
msgid "Digital-3"
msgstr "数字线路3"

#: sys/oss/gstossmixertrack.c:118
msgid "Phone-in"
msgstr "话筒输入"

#: sys/oss/gstossmixertrack.c:119
msgid "Phone-out"
msgstr "话筒输出"

#: sys/oss/gstossmixertrack.c:120
msgid "Video"
msgstr "视频"

#: sys/oss/gstossmixertrack.c:121
msgid "Radio"
msgstr "广播"

#: sys/oss/gstossmixertrack.c:122 sys/sunaudio/gstsunaudiomixertrack.c:65
msgid "Monitor"
msgstr "监控器"

#: sys/sunaudio/gstsunaudiomixertrack.c:65
msgid "Gain"
msgstr "增益"

#: sys/v4l2/gstv4l2src.c:1226 sys/v4l2/gstv4l2src.c:1275
#, c-format
msgid "Error read()ing %d bytes on device '%s'."
msgstr "读取设备‘%2$s’中的 %1$d 字节时出错。"

#: sys/v4l2/gstv4l2src.c:1257
#, c-format
msgid "Got unexpected frame size of %u instead of %u."
msgstr "取得了 %u 的不需要的帧大小，而不是 %u。"

#: sys/v4l2/v4l2_calls.c:93
#, c-format
msgid "Error getting capabilities for device '%s': It isn't a v4l2 driver. Check if it is a v4l1 driver."
msgstr "获取设备‘%s’的信息时出错:它不是一个 v4l2 驱动器，请检查是否为 v4l1。"

#: sys/v4l2/v4l2_calls.c:132
#, c-format
msgid "Failed to query attributes of input %d in device %s"
msgstr "查寻设备 %2$s 中的输入 %1$d 的属性时出错"

#: sys/v4l2/v4l2_calls.c:162
#, c-format
msgid "Failed to get setting of tuner %d on device '%s'."
msgstr "获取设备 %2$s 上的微调钮 %1$d 的设置时出错"

#: sys/v4l2/v4l2_calls.c:205
#, fuzzy, c-format
msgid "Failed to query norm on device '%s'."
msgstr "查寻设备 ‘%s’上的基准时出错"

#: sys/v4l2/v4l2_calls.c:254
#, c-format
msgid "Failed getting controls attributes on device '%s.'"
msgstr "获取设备‘%s’上的控制属性时出错。"

#: sys/v4l2/v4l2_calls.c:331
#, c-format
msgid "Failed getting controls attributes on device '%s'."
msgstr "获取设备‘%s’上的控制属性时出错。"

#: sys/v4l2/v4l2_calls.c:449
#, c-format
msgid "Cannot identify device '%s'."
msgstr "无法确认设备‘%s’。"

#: sys/v4l2/v4l2_calls.c:456
#, c-format
msgid "This isn't a device '%s'."
msgstr "不是设备‘%s’。"

#: sys/v4l2/v4l2_calls.c:463
#, c-format
msgid "Could not open device '%s' for reading and writing."
msgstr "无法打开设备‘%s’读写。"

#: sys/v4l2/v4l2_calls.c:470
#, c-format
msgid "Device '%s' is not a capture device."
msgstr "‘%s’不是一个捕获设备。"

#: sys/v4l2/v4l2_calls.c:565
#, fuzzy, c-format
msgid "Failed to set norm for device '%s'."
msgstr "设置设备‘%s’的基准时出错。"

#: sys/v4l2/v4l2_calls.c:603
#, c-format
msgid "Failed to get current tuner frequency for device '%s'."
msgstr "获取设备‘%s’的当前微调钮频率时出错。"

#: sys/v4l2/v4l2_calls.c:645
#, c-format
msgid "Failed to set current tuner frequency for device '%s' to %lu Hz."
msgstr "设置设备‘%s’的当前微调钮频率为 %lu Hz 时出错。"

#: sys/v4l2/v4l2_calls.c:679
#, c-format
msgid "Failed to get signal strength for device '%s'."
msgstr "获取设备‘%s’的信号长度时出错。"

#: sys/v4l2/v4l2_calls.c:715
#, c-format
msgid "Failed to get value for control %d on device '%s'."
msgstr "获取设备‘%2$s’的控制器 %1$d 的值出错。"

#: sys/v4l2/v4l2_calls.c:750
#, c-format
msgid "Failed to set value %d for control %d on device '%s'."
msgstr "设置设备‘%3$s’的控制器 %2$d 的值为 %1$d 时出错。"

#: sys/v4l2/v4l2_calls.c:779
#, c-format
msgid "Failed to get current input on device '%s'. May be it is a radio device"
msgstr "获取设备‘%s’上的当前输入出错。也许它是一个广播设备"

#: sys/v4l2/v4l2_calls.c:801
#, c-format
msgid "Failed to set input %d on device %s."
msgstr "设置设备 %2$s 上的输入 %1$d 时出错。"

#: sys/v4l2/v4l2src_calls.c:364
#, c-format
msgid "Could not enqueue buffers in device '%s'."
msgstr "无法对设备‘%s’中的缓冲区进行排序。"

#: sys/v4l2/v4l2src_calls.c:543
#, c-format
msgid "Failed to enumerate possible video formats device '%s' can work with"
msgstr "枚举设备‘%s’可能支持的视频格式时出错"

#: sys/v4l2/v4l2src_calls.c:1089 sys/v4l2/v4l2src_calls.c:1106
#: sys/v4l2/v4l2src_calls.c:1115
#, c-format
msgid "Failed trying to get video frames from device '%s'."
msgstr "从设备‘%s’上获取视频的尝试失败了。"

#: sys/v4l2/v4l2src_calls.c:1091
#, c-format
msgid "The buffer type is not supported, or the index is out of bounds, or no buffers have been allocated yet, or the userptr or length are invalid. device %s"
msgstr "不支持的缓冲区类型，或者索引超出范围了，或是还未分配缓冲区，或非法的用户指针或长度。设备 %s"

#: sys/v4l2/v4l2src_calls.c:1100
#, c-format
msgid "Failed trying to get video frames from device '%s'. Not enough memory."
msgstr "从设备‘%s’上获取视频的尝试失败了。没有足够的内存。"

#: sys/v4l2/v4l2src_calls.c:1100
#, c-format
msgid "insufficient memory to enqueue a user pointer buffer. device %s."
msgstr "内存不足无法对用户指针缓冲区进行排序。设备 %s。"

#: sys/v4l2/v4l2src_calls.c:1108
#, c-format
msgid "Failed after %d tries. device %s. system error: %s"
msgstr "在 %d 次尝试后失败。设备 %s。系统错误: %s"

#: sys/v4l2/v4l2src_calls.c:1117
#, c-format
msgid "No free buffers found in the pool at index %d."
msgstr "在内存池中 %d 处没有可分配的缓冲区。"

#: sys/v4l2/v4l2src_calls.c:1208
#, c-format
msgid "Could not get parameters on device '%s'"
msgstr "无法获取设备‘%s’的参数"

#: sys/v4l2/v4l2src_calls.c:1236
msgid "Video input device did not accept new frame rate setting."
msgstr "视频输入设备不接受新的帧率设置。"

#: sys/v4l2/v4l2src_calls.c:1253
#, c-format
msgid "Device '%s' does not support video capture"
msgstr "设备‘%s’不支持视频捕获"

#: sys/v4l2/v4l2src_calls.c:1261 sys/v4l2/v4l2src_calls.c:1270
#, c-format
msgid "Device '%s' cannot capture at %dx%d"
msgstr "设备‘%s’不能在 %dx%d 处捕获"

#: sys/v4l2/v4l2src_calls.c:1279
#, c-format
msgid "Device '%s' cannot capture in the specified format"
msgstr "设备‘%s’无法以指定格式捕获"

#: sys/v4l2/v4l2src_calls.c:1357
#, c-format
msgid "Could not get buffers from device '%s'."
msgstr "无法从设备‘%s’中获取缓冲区。"

#: sys/v4l2/v4l2src_calls.c:1366
#, c-format
msgid "Could not get enough buffers from device '%s'."
msgstr "无法从设备‘%s’中获取足够的缓冲区。"

#: sys/v4l2/v4l2src_calls.c:1375
#, c-format
msgid "Could not map buffers from device '%s'"
msgstr "无法从设备‘%s’中映射出缓冲区"

#: sys/v4l2/v4l2src_calls.c:1383
#, c-format
msgid "The driver of device '%s' does not support any known capture method."
msgstr "设备‘%s’的驱动不支持任何已知的捕获方式。"

#: sys/v4l2/v4l2src_calls.c:1428
#, c-format
msgid "Error starting streaming capture from device '%s'."
msgstr "从设备‘%s’中启用流捕获时出错。"

#: sys/v4l2/v4l2src_calls.c:1472
#, c-format
msgid "Error stopping streaming capture from device '%s'."
msgstr "从设备‘%s’中停止流捕获时出错。"

#: sys/ximage/gstximagesrc.c:711
msgid "Changing resolution at runtime is not yet supported."
msgstr "尚不支持在运行时更改分辨率。"

#: sys/ximage/gstximagesrc.c:725
msgid "Cannot operate without a clock"
msgstr "没有时钟的话无法操作"

#~ msgid "Could not read from CD."
#~ msgstr "无法从 CD 中读取。"

#~ msgid "Could not open CD device for reading."
#~ msgstr "无法打开 CD 设备读取。"

#~ msgid "Disc is not an Audio CD."
#~ msgstr "非音频 CD 盘。"

#~ msgid "This file is encrypted and cannot be played."
#~ msgstr "此文件已加密，无法播放。"