# SOME DESCRIPTIVE TITLE. # Copyright (C) 2002, 2007 Free Software Foundation, Inc. # LI Daobing , 2007. # Wang Li , 2002. # msgid "" msgstr "" "Project-Id-Version: libc 2.7\n" "POT-Creation-Date: 2015-01-20 22:14-0500\n" "PO-Revision-Date: 2007-11-18 12:34+0800\n" "Last-Translator: LI Daobing \n" "Language-Team: Chinese (simplified) \n" "Language: zh_CN\n" "X-Bugs: Report translation errors to the Language-Team address.\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" #: argp/argp-help.c:227 #, c-format msgid "%.*s: ARGP_HELP_FMT parameter requires a value" msgstr "%.*s：参数 ARGP_HELP_FMT 需要一个值" #: argp/argp-help.c:237 #, c-format msgid "%.*s: Unknown ARGP_HELP_FMT parameter" msgstr "%.*s：未知的 ARGP_HELP_FMT 参数" #: argp/argp-help.c:250 #, c-format msgid "Garbage in ARGP_HELP_FMT: %s" msgstr "ARGP_HELP_FMT 中有垃圾: %s" #: argp/argp-help.c:1214 msgid "Mandatory or optional arguments to long options are also mandatory or optional for any corresponding short options." msgstr "长选项的强制或可选参数对对应的短选项也是强制或可选的。" #: argp/argp-help.c:1600 msgid "Usage:" msgstr "用法：" #: argp/argp-help.c:1604 msgid " or: " msgstr " 或：" #: argp/argp-help.c:1616 msgid " [OPTION...]" msgstr " [选项...]" #: argp/argp-help.c:1643 #, c-format msgid "Try `%s --help' or `%s --usage' for more information.\n" msgstr "试用“%s --help”或“%s --usage”以获取更多信息。\n" #: argp/argp-help.c:1671 #, c-format msgid "Report bugs to %s.\n" msgstr "将错误报告给 %s。\n" #: argp/argp-parse.c:101 msgid "Give this help list" msgstr "给出该系统求助列表" #: argp/argp-parse.c:102 msgid "Give a short usage message" msgstr "给出简要的用法信息" #: argp/argp-parse.c:103 catgets/gencat.c:109 catgets/gencat.c:113 #: iconv/iconv_prog.c:60 iconv/iconv_prog.c:61 nscd/nscd.c:105 #: nss/makedb.c:120 msgid "NAME" msgstr "名称" #: argp/argp-parse.c:104 msgid "Set the program name" msgstr "设定程序名" #: argp/argp-parse.c:105 msgid "SECS" msgstr "" #: argp/argp-parse.c:106 msgid "Hang for SECS seconds (default 3600)" msgstr "挂起 SECS 秒 (默认 3600)" #: argp/argp-parse.c:167 msgid "Print program version" msgstr "打印程序版本号" #: argp/argp-parse.c:183 msgid "(PROGRAM ERROR) No version known!?" msgstr "(程序错误) 不知道版本号！？" #: argp/argp-parse.c:623 #, c-format msgid "%s: Too many arguments\n" msgstr "%s：过多的选项\n" #: argp/argp-parse.c:766 msgid "(PROGRAM ERROR) Option should have been recognized!?" msgstr "(程序错误) 选项应该可识别！？" #: assert/assert-perr.c:35 #, c-format msgid "%s%s%s:%u: %s%sUnexpected error: %s.\n" msgstr "%s%s%s：%u：%s%s意外的错误：%s。\n" #: assert/assert.c:101 #, fuzzy, c-format #| msgid "%s%s%s:%u: %s%sAssertion `%s' failed.\n" msgid "" "%s%s%s:%u: %s%sAssertion `%s' failed.\n" "%n" msgstr "%s%s%s：%u：%s%s断言“%s”失败。\n" #: catgets/gencat.c:110 msgid "Create C header file NAME containing symbol definitions" msgstr "创建含有符号定义的给定名称的 C 头文件" #: catgets/gencat.c:112 msgid "Do not use existing catalog, force new output file" msgstr "不使用现有的分类，强制创建新输出文件" #: catgets/gencat.c:113 nss/makedb.c:120 msgid "Write output to file NAME" msgstr "将输出写入到指定文件中" #: catgets/gencat.c:118 msgid "" "Generate message catalog.\vIf INPUT-FILE is -, input is read from standard input. If OUTPUT-FILE\n" "is -, output is written to standard output.\n" msgstr "" #: catgets/gencat.c:123 msgid "" "-o OUTPUT-FILE [INPUT-FILE]...\n" "[OUTPUT-FILE [INPUT-FILE]...]" msgstr "" "-o 输出文件 [输入文件]...\n" "[输出文件 [输入文件]...]" #: catgets/gencat.c:229 debug/pcprofiledump.c:209 elf/ldconfig.c:307 #: elf/pldd.c:244 elf/sln.c:85 elf/sprof.c:372 iconv/iconv_prog.c:408 #: iconv/iconvconfig.c:379 locale/programs/locale.c:277 #: locale/programs/localedef.c:376 login/programs/pt_chown.c:88 #: malloc/memusagestat.c:563 nss/getent.c:969 nss/makedb.c:369 #: posix/getconf.c:486 sunrpc/rpcinfo.c:691 #: sysdeps/unix/sysv/linux/lddlibc4.c:61 #, c-format msgid "" "For bug reporting instructions, please see:\n" "%s.\n" msgstr "" #: catgets/gencat.c:245 debug/pcprofiledump.c:225 debug/xtrace.sh:64 #: elf/ldconfig.c:323 elf/ldd.bash.in:38 elf/pldd.c:260 elf/sotruss.sh:75 #: elf/sprof.c:389 iconv/iconv_prog.c:425 iconv/iconvconfig.c:396 #: locale/programs/locale.c:294 locale/programs/localedef.c:402 #: login/programs/pt_chown.c:62 malloc/memusage.sh:71 #: malloc/memusagestat.c:581 nscd/nscd.c:509 nss/getent.c:86 nss/makedb.c:385 #: posix/getconf.c:468 sysdeps/unix/sysv/linux/lddlibc4.c:68 #, c-format msgid "" "Copyright (C) %s Free Software Foundation, Inc.\n" "This is free software; see the source for copying conditions. There is NO\n" "warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.\n" msgstr "" #: catgets/gencat.c:250 debug/pcprofiledump.c:230 debug/xtrace.sh:68 #: elf/ldconfig.c:328 elf/pldd.c:265 elf/sprof.c:395 iconv/iconv_prog.c:430 #: iconv/iconvconfig.c:401 locale/programs/locale.c:299 #: locale/programs/localedef.c:407 malloc/memusage.sh:75 #: malloc/memusagestat.c:586 nscd/nscd.c:514 nss/getent.c:91 nss/makedb.c:390 #: posix/getconf.c:473 #, c-format msgid "Written by %s.\n" msgstr "由 %s 编写。\n" #: catgets/gencat.c:281 msgid "*standard input*" msgstr "*标准输入*" #: catgets/gencat.c:287 iconv/iconv_charmap.c:167 iconv/iconv_prog.c:293 #: nss/makedb.c:246 #, c-format msgid "cannot open input file `%s'" msgstr "无法打开输入文件“%s”" #: catgets/gencat.c:416 catgets/gencat.c:491 msgid "illegal set number" msgstr "非法的集合编号" #: catgets/gencat.c:443 msgid "duplicate set definition" msgstr "重复的集合定义" #: catgets/gencat.c:445 catgets/gencat.c:617 catgets/gencat.c:669 msgid "this is the first definition" msgstr "这是第一个定义" #: catgets/gencat.c:516 #, c-format msgid "unknown set `%s'" msgstr "未知集合“%s”" #: catgets/gencat.c:557 msgid "invalid quote character" msgstr "无效的引用字符" #: catgets/gencat.c:570 #, c-format msgid "unknown directive `%s': line ignored" msgstr "未知的指令“%s”：忽略此行" #: catgets/gencat.c:615 msgid "duplicated message number" msgstr "重复的消息编号" #: catgets/gencat.c:666 msgid "duplicated message identifier" msgstr "重复的消息标识符" #: catgets/gencat.c:723 msgid "invalid character: message ignored" msgstr "无效的字符：忽略消息" #: catgets/gencat.c:766 msgid "invalid line" msgstr "无效的行" #: catgets/gencat.c:820 msgid "malformed line ignored" msgstr "" #: catgets/gencat.c:984 catgets/gencat.c:1025 #, c-format msgid "cannot open output file `%s'" msgstr "无法打开输出文件“%s”" #: catgets/gencat.c:1187 locale/programs/linereader.c:560 msgid "invalid escape sequence" msgstr "无效的转义序列" #: catgets/gencat.c:1209 msgid "unterminated message" msgstr "未终止的消息" #: catgets/gencat.c:1233 #, c-format msgid "while opening old catalog file" msgstr "在打开旧分类文件时" #: catgets/gencat.c:1324 #, c-format msgid "conversion modules not available" msgstr "转换模块不可用" #: catgets/gencat.c:1350 #, c-format msgid "cannot determine escape character" msgstr "无法确定转义字符" #: debug/pcprofiledump.c:53 msgid "Don't buffer output" msgstr "不要对输出进行缓冲" #: debug/pcprofiledump.c:58 msgid "Dump information generated by PC profiling." msgstr "" #: debug/pcprofiledump.c:61 msgid "[FILE]" msgstr "[文件]" #: debug/pcprofiledump.c:108 #, c-format msgid "cannot open input file" msgstr "无法打开输入文件" #: debug/pcprofiledump.c:115 #, c-format msgid "cannot read header" msgstr "无法读入头" #: debug/pcprofiledump.c:179 #, c-format msgid "invalid pointer size" msgstr "无效的指针大小" #: debug/xtrace.sh:26 debug/xtrace.sh:44 msgid "Usage: xtrace [OPTION]... PROGRAM [PROGRAMOPTION]...\\n" msgstr "" #: debug/xtrace.sh:32 elf/sotruss.sh:56 elf/sotruss.sh:67 elf/sotruss.sh:135 #: malloc/memusage.sh:26 #, fuzzy #| msgid "Try `%s --help' or `%s --usage' for more information.\n" msgid "Try \\`%s --help' or \\`%s --usage' for more information.\\n" msgstr "试用“%s --help”或“%s --usage”以获取更多信息。\n" #: debug/xtrace.sh:38 #, fuzzy #| msgid "%s: option `%s' requires an argument\n" msgid "%s: option '%s' requires an argument.\\n" msgstr "%s：选项“%s”需要一个参数\n" #: debug/xtrace.sh:45 msgid "" "Trace execution of program by printing currently executed function.\n" "\n" " --data=FILE Don't run the program, just print the data from FILE.\n" "\n" " -?,--help Print this help and exit\n" " --usage Give a short usage message\n" " -V,--version Print version information and exit\n" "\n" "Mandatory arguments to long options are also mandatory for any corresponding\n" "short options.\n" "\n" msgstr "" #: debug/xtrace.sh:57 elf/ldd.bash.in:55 elf/sotruss.sh:49 #: malloc/memusage.sh:64 msgid "For bug reporting instructions, please see:\\\\n%s.\\\\n" msgstr "" #: debug/xtrace.sh:125 msgid "xtrace: unrecognized option \\`$1'\\n" msgstr "xtrace：无法识别的选项“$1”\\n" #: debug/xtrace.sh:138 msgid "No program name given\\n" msgstr "未指定程序名" #: debug/xtrace.sh:146 #, sh-format msgid "executable \\`$program' not found\\n" msgstr "" #: debug/xtrace.sh:150 #, sh-format msgid "\\`$program' is no executable\\n" msgstr "“$program”不可执行\\n" #: dlfcn/dlinfo.c:63 msgid "RTLD_SELF used in code not dynamically loaded" msgstr "" #: dlfcn/dlinfo.c:72 msgid "unsupported dlinfo request" msgstr "不支持的 dlinfo 请求" #: dlfcn/dlmopen.c:63 msgid "invalid namespace" msgstr "无效的名字空间" #: dlfcn/dlmopen.c:68 msgid "invalid mode" msgstr "无效的模式" #: dlfcn/dlopen.c:64 msgid "invalid mode parameter" msgstr "无效的模式参数" #: elf/cache.c:69 msgid "unknown" msgstr "未知" #: elf/cache.c:135 msgid "Unknown OS" msgstr "未知的操作系统" #: elf/cache.c:140 #, c-format msgid ", OS ABI: %s %d.%d.%d" msgstr ", OS ABI: %s %d.%d.%d" #: elf/cache.c:157 elf/ldconfig.c:1340 #, c-format msgid "Can't open cache file %s\n" msgstr "无法打开缓冲文件 %s\n" #: elf/cache.c:171 #, c-format msgid "mmap of cache file failed.\n" msgstr "缓冲文件的 mmap 失败。\n" #: elf/cache.c:175 elf/cache.c:189 #, c-format msgid "File is not a cache file.\n" msgstr "文件不是缓冲区文件。\n" #: elf/cache.c:222 elf/cache.c:232 #, c-format msgid "%d libs found in cache `%s'\n" msgstr "在缓冲区“%2$s”中找到 %1$d 个库\n" #: elf/cache.c:426 #, c-format msgid "Can't create temporary cache file %s" msgstr "无法创建临时缓冲文件 %s" #: elf/cache.c:434 elf/cache.c:444 elf/cache.c:448 elf/cache.c:453 #, c-format msgid "Writing of cache data failed" msgstr "写缓冲数据失败" #: elf/cache.c:458 #, c-format msgid "Changing access rights of %s to %#o failed" msgstr "将 %s 的访问权限改变为 %#o 失败" #: elf/cache.c:463 #, c-format msgid "Renaming of %s to %s failed" msgstr "将 %s 改名为 %s 失败" #: elf/dl-close.c:385 elf/dl-open.c:470 msgid "cannot create scope list" msgstr "无法创建范围列表" #: elf/dl-close.c:770 msgid "shared object not open" msgstr "共享库未打开" #: elf/dl-deps.c:112 msgid "DST not allowed in SUID/SGID programs" msgstr "在 SUID/SGID 程序中不允许 DST" #: elf/dl-deps.c:125 msgid "empty dynamic string token substitution" msgstr "空动态字符串替换" #: elf/dl-deps.c:131 #, c-format msgid "cannot load auxiliary `%s' because of empty dynamic string token substitution\n" msgstr "" #: elf/dl-deps.c:467 msgid "cannot allocate dependency list" msgstr "无法分配倚赖列表" #: elf/dl-deps.c:504 elf/dl-deps.c:564 msgid "cannot allocate symbol search list" msgstr "无法分配符号搜索列表" #: elf/dl-deps.c:544 msgid "Filters not supported with LD_TRACE_PRELINKING" msgstr "" #: elf/dl-error.c:77 msgid "DYNAMIC LINKER BUG!!!" msgstr "动态链接器 BUG!!!" #: elf/dl-error.c:127 msgid "error while loading shared libraries" msgstr "装入共享库时出错" #: elf/dl-fptr.c:88 sysdeps/hppa/dl-fptr.c:94 msgid "cannot map pages for fdesc table" msgstr "无法为 fdesc 表映射页" #: elf/dl-fptr.c:192 sysdeps/hppa/dl-fptr.c:207 msgid "cannot map pages for fptr table" msgstr "无法为 fptr 表映射页" #: elf/dl-fptr.c:221 sysdeps/hppa/dl-fptr.c:236 msgid "internal error: symidx out of range of fptr table" msgstr "内部错误: symidx 超出 fptr 表的范围" #: elf/dl-hwcaps.c:184 elf/dl-hwcaps.c:196 msgid "cannot create capability list" msgstr "无法创建功能列表" #: elf/dl-load.c:410 msgid "cannot allocate name record" msgstr "无法分配名记录" #: elf/dl-load.c:495 elf/dl-load.c:611 elf/dl-load.c:694 elf/dl-load.c:813 msgid "cannot create cache for search path" msgstr "无法创建搜索路径缓冲器" #: elf/dl-load.c:586 msgid "cannot create RUNPATH/RPATH copy" msgstr "无法创建 RUNPATH/RPATH 的副本" #: elf/dl-load.c:680 msgid "cannot create search path array" msgstr "无法创建搜索路径数组" #: elf/dl-load.c:885 msgid "cannot stat shared object" msgstr "无法对共享目标进行 stat 操作" #: elf/dl-load.c:963 msgid "cannot open zero fill device" msgstr "无法打开零填充设备" #: elf/dl-load.c:1010 elf/dl-load.c:2165 msgid "cannot create shared object descriptor" msgstr "无法创建共享对象描述符" #: elf/dl-load.c:1029 elf/dl-load.c:1570 elf/dl-load.c:1682 msgid "cannot read file data" msgstr "无法读入文件数据" #: elf/dl-load.c:1069 msgid "ELF load command alignment not page-aligned" msgstr "ELF 加载命令对齐不是按页对齐的" #: elf/dl-load.c:1076 msgid "ELF load command address/offset not properly aligned" msgstr "ELF 装入命令的地址/偏移量没有正确地对齐" #: elf/dl-load.c:1160 msgid "cannot allocate TLS data structures for initial thread" msgstr "" #: elf/dl-load.c:1183 msgid "cannot handle TLS data" msgstr "无法处理 TLS 数据" #: elf/dl-load.c:1202 msgid "object file has no loadable segments" msgstr "目标文件没有可加载段" #: elf/dl-load.c:1211 elf/dl-load.c:1662 msgid "cannot dynamically load executable" msgstr "无法动态装入可执行文件" #: elf/dl-load.c:1232 msgid "object file has no dynamic section" msgstr "目标文件没有动态节" #: elf/dl-load.c:1255 msgid "shared object cannot be dlopen()ed" msgstr "无法用 dlopen() 打开共享库" #: elf/dl-load.c:1268 msgid "cannot allocate memory for program header" msgstr "无法为程序头分配内存" #: elf/dl-load.c:1284 elf/dl-open.c:195 msgid "invalid caller" msgstr "无效的调用者" #: elf/dl-load.c:1307 elf/dl-load.h:130 msgid "cannot change memory protections" msgstr "无法改变内存保护" #: elf/dl-load.c:1327 msgid "cannot enable executable stack as shared object requires" msgstr "无法启用共享目标需要的执行栈" #: elf/dl-load.c:1340 msgid "cannot close file descriptor" msgstr "无法关闭文件描述符" #: elf/dl-load.c:1570 msgid "file too short" msgstr "文件过短" #: elf/dl-load.c:1605 msgid "invalid ELF header" msgstr "无效的 ELF 头" #: elf/dl-load.c:1617 msgid "ELF file data encoding not big-endian" msgstr "ELF 文件数据编码不是 big-endian" #: elf/dl-load.c:1619 msgid "ELF file data encoding not little-endian" msgstr "ELF 文件数据编码不是 little-endian" #: elf/dl-load.c:1623 msgid "ELF file version ident does not match current one" msgstr "" #: elf/dl-load.c:1627 msgid "ELF file OS ABI invalid" msgstr "ELF 文件 OS ABI 无效" #: elf/dl-load.c:1630 msgid "ELF file ABI version invalid" msgstr "ELF 文件 ABI 版本无效" #: elf/dl-load.c:1633 msgid "nonzero padding in e_ident" msgstr "" #: elf/dl-load.c:1636 msgid "internal error" msgstr "内部错误" #: elf/dl-load.c:1643 msgid "ELF file version does not match current one" msgstr "ELF 文件版本与当前版本不匹配" #: elf/dl-load.c:1651 msgid "only ET_DYN and ET_EXEC can be loaded" msgstr "" #: elf/dl-load.c:1667 msgid "ELF file's phentsize not the expected size" msgstr "" #: elf/dl-load.c:2184 msgid "wrong ELF class: ELFCLASS64" msgstr "错误 ELF 类: ELFCLASS64" #: elf/dl-load.c:2185 msgid "wrong ELF class: ELFCLASS32" msgstr "错误 ELF 类: ELFCLASS32" #: elf/dl-load.c:2188 msgid "cannot open shared object file" msgstr "无法打开共享对象文件" #: elf/dl-load.h:128 msgid "failed to map segment from shared object" msgstr "无法从共享目标中映射段" #: elf/dl-load.h:132 msgid "cannot map zero-fill pages" msgstr "无法映射用零填充的页" #: elf/dl-lookup.c:791 msgid "relocation error" msgstr "重定位错误" #: elf/dl-lookup.c:818 msgid "symbol lookup error" msgstr "符号查询错误" #: elf/dl-open.c:102 msgid "cannot extend global scope" msgstr "无法扩展全局范围" #: elf/dl-open.c:520 msgid "TLS generation counter wrapped! Please report this." msgstr "" #: elf/dl-open.c:542 #, fuzzy #| msgid "cannot allocate memory in static TLS block" msgid "cannot load any more object with static TLS" msgstr "无法在静态 TLS 块中分配内存" #: elf/dl-open.c:599 msgid "invalid mode for dlopen()" msgstr "无效的 dlopen() 模式" #: elf/dl-open.c:616 msgid "no more namespaces available for dlmopen()" msgstr "" #: elf/dl-open.c:634 msgid "invalid target namespace in dlmopen()" msgstr "dlmopen() 中无效的目标名字空间" #: elf/dl-reloc.c:120 msgid "cannot allocate memory in static TLS block" msgstr "无法在静态 TLS 块中分配内存" #: elf/dl-reloc.c:212 msgid "cannot make segment writable for relocation" msgstr "" #: elf/dl-reloc.c:275 #, c-format msgid "%s: no PLTREL found in object %s\n" msgstr "" #: elf/dl-reloc.c:290 #, c-format msgid "%s: out of memory to store relocation results for %s\n" msgstr "" #: elf/dl-reloc.c:306 msgid "cannot restore segment prot after reloc" msgstr "重定位后无法恢复段 prot" #: elf/dl-reloc.c:335 msgid "cannot apply additional memory protection after relocation" msgstr "无法在重定位后应用额外的内存保护" #: elf/dl-sym.c:153 msgid "RTLD_NEXT used in code not dynamically loaded" msgstr "" #: elf/dl-tls.c:933 msgid "cannot create TLS data structures" msgstr "无法创建 TLS 数据结构" #: elf/dl-version.c:166 #, fuzzy #| msgid "symbol lookup error" msgid "version lookup error" msgstr "符号查询错误" #: elf/dl-version.c:296 msgid "cannot allocate version reference table" msgstr "无法分配版本引用表格" #: elf/ldconfig.c:141 msgid "Print cache" msgstr "打印缓冲区" #: elf/ldconfig.c:142 msgid "Generate verbose messages" msgstr "生成详细消息" #: elf/ldconfig.c:143 msgid "Don't build cache" msgstr "不要创建缓冲区" #: elf/ldconfig.c:144 msgid "Don't generate links" msgstr "不要生成连接" #: elf/ldconfig.c:145 msgid "Change to and use ROOT as root directory" msgstr "进入 ROOT 目录并将其作为根目录" #: elf/ldconfig.c:145 msgid "ROOT" msgstr "ROOT" #: elf/ldconfig.c:146 msgid "CACHE" msgstr "CACHE" #: elf/ldconfig.c:146 msgid "Use CACHE as cache file" msgstr "将 CACHE 用作缓冲区文件" #: elf/ldconfig.c:147 msgid "CONF" msgstr "CONF" #: elf/ldconfig.c:147 msgid "Use CONF as configuration file" msgstr "将 CONF 用作配置文件" #: elf/ldconfig.c:148 msgid "Only process directories specified on the command line. Don't build cache." msgstr "只在命令行中给出了进程目录。未创建缓冲区。" #: elf/ldconfig.c:149 msgid "Manually link individual libraries." msgstr "手工连接独立的库。" #: elf/ldconfig.c:150 msgid "FORMAT" msgstr "FORMAT" #: elf/ldconfig.c:150 msgid "Format to use: new, old or compat (default)" msgstr "采用的格式：新、旧或兼容(默认)" #: elf/ldconfig.c:151 msgid "Ignore auxiliary cache file" msgstr "忽略辅助缓存文件" #: elf/ldconfig.c:159 msgid "Configure Dynamic Linker Run Time Bindings." msgstr "" #: elf/ldconfig.c:346 #, c-format msgid "Path `%s' given more than once" msgstr "多次给出路径“%s”" #: elf/ldconfig.c:386 #, c-format msgid "%s is not a known library type" msgstr "%s 不是已知类型的库" #: elf/ldconfig.c:414 #, c-format msgid "Can't stat %s" msgstr "无法对 %s 进行 stat 操作" #: elf/ldconfig.c:488 #, c-format msgid "Can't stat %s\n" msgstr "无法对 %s 进行 stat 操作\n" #: elf/ldconfig.c:498 #, c-format msgid "%s is not a symbolic link\n" msgstr "%s 不是符号连接\n" #: elf/ldconfig.c:517 #, c-format msgid "Can't unlink %s" msgstr "" #: elf/ldconfig.c:523 #, c-format msgid "Can't link %s to %s" msgstr "无法将 %s 连接到 %s" #: elf/ldconfig.c:529 msgid " (changed)\n" msgstr " (改变)\n" #: elf/ldconfig.c:531 msgid " (SKIPPED)\n" msgstr " (跳过)\n" #: elf/ldconfig.c:586 #, c-format msgid "Can't find %s" msgstr "无法找到 %s" #: elf/ldconfig.c:602 elf/ldconfig.c:775 elf/ldconfig.c:834 elf/ldconfig.c:868 #, c-format msgid "Cannot lstat %s" msgstr "无法对 %s 进行 lstat 操作" #: elf/ldconfig.c:609 #, c-format msgid "Ignored file %s since it is not a regular file." msgstr "由于不是一个普通文件，忽略文件 %s" #: elf/ldconfig.c:618 #, c-format msgid "No link created since soname could not be found for %s" msgstr "未创建链接，因为 %s 无法找到 soname" #: elf/ldconfig.c:701 #, c-format msgid "Can't open directory %s" msgstr "无法打开目录 %s" #: elf/ldconfig.c:793 elf/ldconfig.c:855 elf/readlib.c:90 #, c-format msgid "Input file %s not found.\n" msgstr "未找到输入文件 %s。\n" #: elf/ldconfig.c:800 #, c-format msgid "Cannot stat %s" msgstr "无法对 %s 进行 stat 操作" #: elf/ldconfig.c:951 #, c-format msgid "libc5 library %s in wrong directory" msgstr "libc5 的库 %s 处于错误的目录中" #: elf/ldconfig.c:954 #, c-format msgid "libc6 library %s in wrong directory" msgstr "libc5 的库 %s 处于错误的目录中" #: elf/ldconfig.c:957 #, c-format msgid "libc4 library %s in wrong directory" msgstr "libc4 的库 %s 处于错误的目录中" #: elf/ldconfig.c:985 #, c-format msgid "libraries %s and %s in directory %s have same soname but different type." msgstr "目录 %3$s 中的 %1$s 和 %2$s 的 so 名称相同但类型不同。" #: elf/ldconfig.c:1094 #, c-format msgid "Warning: ignoring configuration file that cannot be opened: %s" msgstr "" #: elf/ldconfig.c:1160 #, c-format msgid "%s:%u: bad syntax in hwcap line" msgstr "" #: elf/ldconfig.c:1166 #, c-format msgid "%s:%u: hwcap index %lu above maximum %u" msgstr "" #: elf/ldconfig.c:1173 elf/ldconfig.c:1181 #, c-format msgid "%s:%u: hwcap index %lu already defined as %s" msgstr "" #: elf/ldconfig.c:1184 #, c-format msgid "%s:%u: duplicate hwcap %lu %s" msgstr "" #: elf/ldconfig.c:1206 #, c-format msgid "need absolute file name for configuration file when using -r" msgstr "" #: elf/ldconfig.c:1213 locale/programs/xmalloc.c:64 malloc/obstack.c:416 #: malloc/obstack.c:418 posix/getconf.c:441 posix/getconf.c:661 #, c-format msgid "memory exhausted" msgstr "内存耗尽" #: elf/ldconfig.c:1245 #, c-format msgid "%s:%u: cannot read directory %s" msgstr "%s：%u: 无法读取目录 %s" #: elf/ldconfig.c:1289 #, c-format msgid "relative path `%s' used to build cache" msgstr "" #: elf/ldconfig.c:1319 #, c-format msgid "Can't chdir to /" msgstr "无法改变目录到 /" #: elf/ldconfig.c:1360 #, c-format msgid "Can't open cache file directory %s\n" msgstr "无法打开缓冲文件目录 %s\n" #: elf/ldd.bash.in:42 msgid "Written by %s and %s.\n" msgstr "由 %s 和 %s 编写。\n" #: elf/ldd.bash.in:47 msgid "" "Usage: ldd [OPTION]... FILE...\n" " --help print this help and exit\n" " --version print version information and exit\n" " -d, --data-relocs process data relocations\n" " -r, --function-relocs process data and function relocations\n" " -u, --unused print unused direct dependencies\n" " -v, --verbose print all information\n" msgstr "" #: elf/ldd.bash.in:80 msgid "ldd: option \\`$1' is ambiguous" msgstr "ldd: 选项“$1”具有二义性" #: elf/ldd.bash.in:87 msgid "unrecognized option" msgstr "无法识别的选项" #: elf/ldd.bash.in:88 elf/ldd.bash.in:125 msgid "Try \\`ldd --help' for more information." msgstr "试用“ldd --help”以获取更多信息。" #: elf/ldd.bash.in:124 msgid "missing file arguments" msgstr "缺少文件参数" #. TRANS No such file or directory. This is a ``file doesn't exist'' error #. TRANS for ordinary files that are referenced in contexts where they are #. TRANS expected to already exist. #: elf/ldd.bash.in:147 sysdeps/gnu/errlist.c:37 msgid "No such file or directory" msgstr "没有那个文件或目录" #: elf/ldd.bash.in:150 inet/rcmd.c:488 msgid "not regular file" msgstr "不是普通文件" #: elf/ldd.bash.in:153 msgid "warning: you do not have execution permission for" msgstr "警告: 你没有执行权限 " #: elf/ldd.bash.in:182 msgid "\tnot a dynamic executable" msgstr "\t不是动态可执行文件" #: elf/ldd.bash.in:190 msgid "exited with unknown exit code" msgstr "以未知的退出码退出" #: elf/ldd.bash.in:195 msgid "error: you do not have read permission for" msgstr "错误: 你没有读权限 " #: elf/pldd-xx.c:105 #, fuzzy, c-format #| msgid "cannot read header from `%s'" msgid "cannot find program header of process" msgstr "无法从“%s”中读入头" #: elf/pldd-xx.c:110 #, fuzzy, c-format #| msgid "cannot read header" msgid "cannot read program header" msgstr "无法读入头" #: elf/pldd-xx.c:135 #, fuzzy, c-format #| msgid "object file has no dynamic section" msgid "cannot read dynamic section" msgstr "目标文件没有动态节" #: elf/pldd-xx.c:147 #, fuzzy, c-format #| msgid "cannot read header" msgid "cannot read r_debug" msgstr "无法读入头" #: elf/pldd-xx.c:167 #, fuzzy, c-format #| msgid "cannot read archive header" msgid "cannot read program interpreter" msgstr "无法读入归档文件头" #: elf/pldd-xx.c:196 #, fuzzy, c-format #| msgid "cannot read file data" msgid "cannot read link map" msgstr "无法读入文件数据" #: elf/pldd-xx.c:207 #, fuzzy, c-format #| msgid "cannot read header" msgid "cannot read object name" msgstr "无法读入头" #: elf/pldd.c:63 msgid "List dynamic shared objects loaded into process." msgstr "" #: elf/pldd.c:67 msgid "PID" msgstr "" #: elf/pldd.c:99 #, c-format msgid "Exactly one parameter with process ID required.\n" msgstr "" #: elf/pldd.c:111 #, fuzzy, c-format #| msgid "invalid pointer size" msgid "invalid process ID '%s'" msgstr "无效的指针大小" #: elf/pldd.c:119 #, fuzzy, c-format #| msgid "cannot open `%s'" msgid "cannot open %s" msgstr "无法打开“%s”" #: elf/pldd.c:144 #, fuzzy, c-format #| msgid "cannot open `%s'" msgid "cannot open %s/task" msgstr "无法打开“%s”" #: elf/pldd.c:147 #, fuzzy, c-format #| msgid "cannot create searchlist" msgid "cannot prepare reading %s/task" msgstr "无法创建搜索列表" #: elf/pldd.c:160 #, fuzzy, c-format #| msgid "invalid ELF header" msgid "invalid thread ID '%s'" msgstr "无效的 ELF 头" #: elf/pldd.c:171 #, fuzzy, c-format #| msgid "cannot find C preprocessor: %s \n" msgid "cannot attach to process %lu" msgstr "无法找到 C 预处理器：%s\n" #: elf/pldd.c:286 #, c-format msgid "cannot get information about process %lu" msgstr "" #: elf/pldd.c:299 #, c-format msgid "process %lu is no ELF program" msgstr "" #: elf/readelflib.c:34 #, c-format msgid "file %s is truncated\n" msgstr "文件 %s 己被截断\n" #: elf/readelflib.c:66 #, c-format msgid "%s is a 32 bit ELF file.\n" msgstr "%s 是一个 32 位 ELF 文件。\n" #: elf/readelflib.c:68 #, c-format msgid "%s is a 64 bit ELF file.\n" msgstr "%s 是一个 64 位 ELF 文件。\n" #: elf/readelflib.c:70 #, c-format msgid "Unknown ELFCLASS in file %s.\n" msgstr "文件 %s 中未知的 ELFCLASS。\n" #: elf/readelflib.c:77 #, c-format msgid "%s is not a shared object file (Type: %d).\n" msgstr "%s 不是共享目标文件 (类型：%d)。\n" #: elf/readelflib.c:108 #, c-format msgid "more than one dynamic segment\n" msgstr "多于一个动态段\n" #: elf/readlib.c:96 #, c-format msgid "Cannot fstat file %s.\n" msgstr "无法对文件 %s 进行 fstat 操作。\n" #: elf/readlib.c:107 #, c-format msgid "File %s is empty, not checked." msgstr "文件 %s 为空，未检查。" #: elf/readlib.c:113 #, c-format msgid "File %s is too small, not checked." msgstr "文件 %s 过小，未检查。" #: elf/readlib.c:123 #, c-format msgid "Cannot mmap file %s.\n" msgstr "无法对文件 %s 进行 mmap 操作。\n" #: elf/readlib.c:161 #, c-format msgid "%s is not an ELF file - it has the wrong magic bytes at the start.\n" msgstr "%s 不是 ELF 文件 - 它起始的魔数错误。\n" #: elf/sln.c:84 #, fuzzy, c-format #| msgid "usage: %s infile\n" msgid "" "Usage: sln src dest|file\n" "\n" msgstr "用法：%s 输入文件\n" #: elf/sln.c:109 #, fuzzy, c-format #| msgid "%s: unable to open %s: %m\n" msgid "%s: file open error: %m\n" msgstr "%s：无法打开 %s：%m\n" #: elf/sln.c:146 #, c-format msgid "No target in line %d\n" msgstr "" #: elf/sln.c:178 #, fuzzy, c-format #| msgid "%s:%u: cannot read directory %s" msgid "%s: destination must not be a directory\n" msgstr "%s：%u: 无法读取目录 %s" #: elf/sln.c:184 #, c-format msgid "%s: failed to remove the old destination\n" msgstr "" #: elf/sln.c:192 #, fuzzy, c-format #| msgid "%s: invalid option -- %c\n" msgid "%s: invalid destination: %s\n" msgstr "%s：无效选项 -- %c\n" #: elf/sln.c:207 elf/sln.c:216 #, fuzzy, c-format #| msgid "%s: Can't link from %s to %s: %s\n" msgid "Invalid link from \"%s\" to \"%s\": %s\n" msgstr "%s：无法从 %s 连接到 %s：%s\n" #: elf/sotruss.sh:32 #, sh-format msgid "" "Usage: sotruss [OPTION...] [--] EXECUTABLE [EXECUTABLE-OPTION...]\n" " -F, --from FROMLIST Trace calls from objects on FROMLIST\n" " -T, --to TOLIST Trace calls to objects on TOLIST\n" "\n" " -e, --exit Also show exits from the function calls\n" " -f, --follow Trace child processes\n" " -o, --output FILENAME Write output to FILENAME (or FILENAME.$PID in case\n" "\t\t\t -f is also used) instead of standard error\n" "\n" " -?, --help Give this help list\n" " --usage Give a short usage message\n" " --version Print program version" msgstr "" #: elf/sotruss.sh:46 #, fuzzy #| msgid "Mandatory or optional arguments to long options are also mandatory or optional for any corresponding short options." msgid "Mandatory arguments to long options are also mandatory for any corresponding\\nshort options.\\n" msgstr "长选项的强制或可选参数对对应的短选项也是强制或可选的。" #: elf/sotruss.sh:55 #, fuzzy #| msgid "%s: option requires an argument -- %c\n" msgid "%s: option requires an argument -- '%s'\\n" msgstr "%s：选项需要一个参数 -- %c\n" #: elf/sotruss.sh:61 #, fuzzy #| msgid "%s: option `%s' is ambiguous\n" msgid "%s: option is ambiguous; possibilities:" msgstr "%s：选项“%s”具有二义性\n" #: elf/sotruss.sh:79 #, fuzzy #| msgid "Written by %s.\n" msgid "Written by %s.\\n" msgstr "由 %s 编写。\n" #: elf/sotruss.sh:86 msgid "" "Usage: %s [-ef] [-F FROMLIST] [-o FILENAME] [-T TOLIST] [--exit]\n" "\t [--follow] [--from FROMLIST] [--output FILENAME] [--to TOLIST]\n" "\t [--help] [--usage] [--version] [--]\n" "\t EXECUTABLE [EXECUTABLE-OPTION...]\\n" msgstr "" #: elf/sotruss.sh:134 #, fuzzy #| msgid "%s: unrecognized option `%c%s'\n" msgid "%s: unrecognized option '%c%s'\\n" msgstr "%s：无法识别的选项“%c%s”\n" #: elf/sprof.c:77 msgid "Output selection:" msgstr "输出选择：" #: elf/sprof.c:79 msgid "print list of count paths and their number of use" msgstr "打印当前路径的列表和他们的使用次数" #: elf/sprof.c:81 msgid "generate flat profile with counts and ticks" msgstr "" #: elf/sprof.c:82 msgid "generate call graph" msgstr "生成调用图" #: elf/sprof.c:89 msgid "Read and display shared object profiling data." msgstr "" #: elf/sprof.c:94 msgid "SHOBJ [PROFDATA]" msgstr "SHOBJ [PROFDATA]" #: elf/sprof.c:433 #, c-format msgid "failed to load shared object `%s'" msgstr "装入共享目标文件“%s”失败" #: elf/sprof.c:442 #, c-format msgid "cannot create internal descriptors" msgstr "无法创建内部描述符" #: elf/sprof.c:554 #, c-format msgid "Reopening shared object `%s' failed" msgstr "重现打开共享对象“%s”失败" #: elf/sprof.c:561 elf/sprof.c:656 #, c-format msgid "reading of section headers failed" msgstr "读取节头部失败" #: elf/sprof.c:569 elf/sprof.c:664 #, c-format msgid "reading of section header string table failed" msgstr "读取节头部字符串表失败" #: elf/sprof.c:595 #, c-format msgid "*** Cannot read debuginfo file name: %m\n" msgstr "*** 无法读取调试信息文件名: %m\n" #: elf/sprof.c:616 #, c-format msgid "cannot determine file name" msgstr "无法确定文件名" #: elf/sprof.c:649 #, c-format msgid "reading of ELF header failed" msgstr "读取 ELF 头部失败" #: elf/sprof.c:685 #, c-format msgid "*** The file `%s' is stripped: no detailed analysis possible\n" msgstr "*** 文件“%s”已剥离：不可能进行细节分析\n" #: elf/sprof.c:715 #, c-format msgid "failed to load symbol data" msgstr "装入符号数据失败" #: elf/sprof.c:780 #, c-format msgid "cannot load profiling data" msgstr "无法加载 profile 数据" #: elf/sprof.c:789 #, c-format msgid "while stat'ing profiling data file" msgstr "当分析 profile 数据文件" #: elf/sprof.c:797 #, c-format msgid "profiling data file `%s' does not match shared object `%s'" msgstr "" #: elf/sprof.c:808 #, c-format msgid "failed to mmap the profiling data file" msgstr "" #: elf/sprof.c:816 #, c-format msgid "error while closing the profiling data file" msgstr "" #: elf/sprof.c:825 elf/sprof.c:923 #, c-format msgid "cannot create internal descriptor" msgstr "无法创建内部描述符" #: elf/sprof.c:899 #, c-format msgid "`%s' is no correct profile data file for `%s'" msgstr "" #: elf/sprof.c:1080 elf/sprof.c:1138 #, c-format msgid "cannot allocate symbol data" msgstr "无法分配符号数据" #: iconv/iconv_charmap.c:141 iconv/iconv_prog.c:448 #, c-format msgid "cannot open output file" msgstr "无法打开输出文件" #: iconv/iconv_charmap.c:187 iconv/iconv_prog.c:311 #, c-format msgid "error while closing input `%s'" msgstr "关闭输入“%s”时出错" #: iconv/iconv_charmap.c:435 #, c-format msgid "illegal input sequence at position %Zd" msgstr "位于 %Zd 的非法输入序列" #: iconv/iconv_charmap.c:454 iconv/iconv_prog.c:539 #, c-format msgid "incomplete character or shift sequence at end of buffer" msgstr "位于缓冲区末尾的不完整字符或转义序列" #: iconv/iconv_charmap.c:499 iconv/iconv_charmap.c:535 iconv/iconv_prog.c:582 #: iconv/iconv_prog.c:618 #, c-format msgid "error while reading the input" msgstr "读取输入时出错" #: iconv/iconv_charmap.c:517 iconv/iconv_prog.c:600 #, c-format msgid "unable to allocate buffer for input" msgstr "无法为输入分配缓冲区" #: iconv/iconv_prog.c:59 msgid "Input/Output format specification:" msgstr "输入/输出格式规范：" #: iconv/iconv_prog.c:60 msgid "encoding of original text" msgstr "原始文本编码" #: iconv/iconv_prog.c:61 msgid "encoding for output" msgstr "输出编码" #: iconv/iconv_prog.c:62 msgid "Information:" msgstr "信息：" #: iconv/iconv_prog.c:63 msgid "list all known coded character sets" msgstr "列举所有已知的字符集" #: iconv/iconv_prog.c:64 locale/programs/localedef.c:129 msgid "Output control:" msgstr "输出控制：" #: iconv/iconv_prog.c:65 msgid "omit invalid characters from output" msgstr "从输出中忽略无效的字符" #: iconv/iconv_prog.c:66 iconv/iconvconfig.c:128 #: locale/programs/localedef.c:122 locale/programs/localedef.c:124 #: locale/programs/localedef.c:126 locale/programs/localedef.c:147 #: malloc/memusagestat.c:56 #, fuzzy #| msgid "[FILE]" msgid "FILE" msgstr "[文件]" #: iconv/iconv_prog.c:66 msgid "output file" msgstr "输出文件" #: iconv/iconv_prog.c:67 msgid "suppress warnings" msgstr "关闭警告" #: iconv/iconv_prog.c:68 msgid "print progress information" msgstr "打印进度信息" #: iconv/iconv_prog.c:73 msgid "Convert encoding of given files from one encoding to another." msgstr "转换给定文件的编码。" #: iconv/iconv_prog.c:77 msgid "[FILE...]" msgstr "[文件...]" #: iconv/iconv_prog.c:233 #, c-format msgid "conversions from `%s' and to `%s' are not supported" msgstr "不支持从“%s”到“%s”的转换" #: iconv/iconv_prog.c:238 #, c-format msgid "conversion from `%s' is not supported" msgstr "不支持以“%s”为源头的转换" #: iconv/iconv_prog.c:245 #, c-format msgid "conversion to `%s' is not supported" msgstr "不支持以“%s”为目标的转换" #: iconv/iconv_prog.c:249 #, c-format msgid "conversion from `%s' to `%s' is not supported" msgstr "不支持从“%s”到“%s”的转换" #: iconv/iconv_prog.c:259 #, c-format msgid "failed to start conversion processing" msgstr "启动转换处理失败" #: iconv/iconv_prog.c:357 #, c-format msgid "error while closing output file" msgstr "关闭输出文件时出错" #: iconv/iconv_prog.c:458 #, c-format msgid "conversion stopped due to problem in writing the output" msgstr "由于写入输出时出现的问题转换停止" #: iconv/iconv_prog.c:535 #, c-format msgid "illegal input sequence at position %ld" msgstr "未知 %ld 处的非法输入序列" #: iconv/iconv_prog.c:543 #, c-format msgid "internal error (illegal descriptor)" msgstr "内部错误 (非法的描述符)" #: iconv/iconv_prog.c:546 #, c-format msgid "unknown iconv() error %d" msgstr "未知的 iconv() 错误 %d" #: iconv/iconv_prog.c:791 msgid "" "The following list contains all the coded character sets known. This does\n" "not necessarily mean that all combinations of these names can be used for\n" "the FROM and TO command line parameters. One coded character set can be\n" "listed with several different names (aliases).\n" "\n" " " msgstr "" #: iconv/iconvconfig.c:109 msgid "Create fastloading iconv module configuration file." msgstr "创建快速装入 iconv 模块配置文件。" #: iconv/iconvconfig.c:113 msgid "[DIR...]" msgstr "[目录...]" #: iconv/iconvconfig.c:126 locale/programs/localedef.c:133 msgid "PATH" msgstr "" #: iconv/iconvconfig.c:127 msgid "Prefix used for all file accesses" msgstr "用于所有文件访问的前缀" #: iconv/iconvconfig.c:128 msgid "Put output in FILE instead of installed location (--prefix does not apply to FILE)" msgstr "" #: iconv/iconvconfig.c:132 msgid "Do not search standard directories, only those on the command line" msgstr "" #: iconv/iconvconfig.c:299 #, c-format msgid "Directory arguments required when using --nostdlib" msgstr "" #: iconv/iconvconfig.c:341 locale/programs/localedef.c:294 #, c-format msgid "no output file produced because warnings were issued" msgstr "由于出现警告而未生成输出文件" #: iconv/iconvconfig.c:430 #, c-format msgid "while inserting in search tree" msgstr "插入搜索树时" #: iconv/iconvconfig.c:1239 #, c-format msgid "cannot generate output file" msgstr "无法生成输出文件" #: inet/rcmd.c:163 msgid "rcmd: Cannot allocate memory\n" msgstr "rcmd：无法分配内存\n" #: inet/rcmd.c:178 msgid "rcmd: socket: All ports in use\n" msgstr "rcmd：socket：所有端口都已在使用了\n" #: inet/rcmd.c:206 #, c-format msgid "connect to address %s: " msgstr "连接到地址 %s：" #: inet/rcmd.c:219 #, c-format msgid "Trying %s...\n" msgstr "正在尝试 %s...\n" #: inet/rcmd.c:255 #, c-format msgid "rcmd: write (setting up stderr): %m\n" msgstr "" #: inet/rcmd.c:271 #, c-format msgid "rcmd: poll (setting up stderr): %m\n" msgstr "" #: inet/rcmd.c:274 msgid "poll: protocol failure in circuit setup\n" msgstr "" #: inet/rcmd.c:306 msgid "socket: protocol failure in circuit setup\n" msgstr "" #: inet/rcmd.c:330 #, c-format msgid "rcmd: %s: short read" msgstr "" #: inet/rcmd.c:486 msgid "lstat failed" msgstr "lstat 操作失败" #: inet/rcmd.c:493 msgid "cannot open" msgstr "无法打开" #: inet/rcmd.c:495 msgid "fstat failed" msgstr "fstat 失败" #: inet/rcmd.c:497 msgid "bad owner" msgstr "错误的拥有者" #: inet/rcmd.c:499 msgid "writeable by other than owner" msgstr "可由除所有者之外的人写入" #: inet/rcmd.c:501 msgid "hard linked somewhere" msgstr "某处的硬连接" #: inet/ruserpass.c:170 inet/ruserpass.c:193 msgid "out of memory" msgstr "内存不足" #: inet/ruserpass.c:184 msgid "Error: .netrc file is readable by others." msgstr "错误：.netrc 对其它人是可读的。" #: inet/ruserpass.c:185 msgid "Remove password or make file unreadable by others." msgstr "删除不能由其它人读入的口令或 make 文件" #: inet/ruserpass.c:277 #, c-format msgid "Unknown .netrc keyword %s" msgstr "未知的 .netrc 关键字 %s" #: libidn/nfkc.c:463 msgid "Character out of range for UTF-8" msgstr "字符超出 UTF-8 的范围" #: locale/programs/charmap-dir.c:57 #, c-format msgid "cannot read character map directory `%s'" msgstr "无法读入字母映射目录“%s”" #: locale/programs/charmap.c:138 #, c-format msgid "character map file `%s' not found" msgstr "找不到字符映射文件“%s”" #: locale/programs/charmap.c:195 #, c-format msgid "default character map file `%s' not found" msgstr "找不到默认字符映射文件“%s”" #: locale/programs/charmap.c:258 #, c-format msgid "character map `%s' is not ASCII compatible, locale not ISO C compliant\n" msgstr "" #: locale/programs/charmap.c:337 #, c-format msgid "%s: must be greater than \n" msgstr "%s： 必须大于 \n" #: locale/programs/charmap.c:357 locale/programs/charmap.c:374 #: locale/programs/repertoire.c:174 #, c-format msgid "syntax error in prolog: %s" msgstr "序言中语法错误：%s" #: locale/programs/charmap.c:358 msgid "invalid definition" msgstr "无效的定义" #: locale/programs/charmap.c:375 locale/programs/locfile.c:131 #: locale/programs/locfile.c:158 locale/programs/repertoire.c:175 msgid "bad argument" msgstr "错误的参数" #: locale/programs/charmap.c:403 #, c-format msgid "duplicate definition of <%s>" msgstr "重复定义 <%s>" #: locale/programs/charmap.c:410 #, c-format msgid "value for <%s> must be 1 or greater" msgstr "<%s>的值必须是 1 或更大" #: locale/programs/charmap.c:422 #, c-format msgid "value of <%s> must be greater or equal than the value of <%s>" msgstr "<%s> 的值必须大于等于 <%s> 的值" #: locale/programs/charmap.c:445 locale/programs/repertoire.c:183 #, c-format msgid "argument to <%s> must be a single character" msgstr "<%s>的参数必须是单个字符" #: locale/programs/charmap.c:471 msgid "character sets with locking states are not supported" msgstr "不支持带有锁定状态的字符集" #: locale/programs/charmap.c:498 locale/programs/charmap.c:552 #: locale/programs/charmap.c:584 locale/programs/charmap.c:678 #: locale/programs/charmap.c:733 locale/programs/charmap.c:774 #: locale/programs/charmap.c:815 #, c-format msgid "syntax error in %s definition: %s" msgstr "%s 的定义中的语法错误：%s" #: locale/programs/charmap.c:499 locale/programs/charmap.c:679 #: locale/programs/charmap.c:775 locale/programs/repertoire.c:230 msgid "no symbolic name given" msgstr "没有给出符号名" #: locale/programs/charmap.c:553 msgid "invalid encoding given" msgstr "给出无效的编码" #: locale/programs/charmap.c:562 msgid "too few bytes in character encoding" msgstr "字符编码中字节数过少" #: locale/programs/charmap.c:564 msgid "too many bytes in character encoding" msgstr "字符编码中字节数过多" #: locale/programs/charmap.c:586 locale/programs/charmap.c:734 #: locale/programs/charmap.c:817 locale/programs/repertoire.c:296 msgid "no symbolic name given for end of range" msgstr "没有为范围的结束给出符号化的名称" #: locale/programs/charmap.c:610 locale/programs/ld-address.c:528 #: locale/programs/ld-collate.c:2626 locale/programs/ld-collate.c:3784 #: locale/programs/ld-ctype.c:2162 locale/programs/ld-ctype.c:2913 #: locale/programs/ld-identification.c:368 #: locale/programs/ld-measurement.c:215 locale/programs/ld-messages.c:298 #: locale/programs/ld-monetary.c:740 locale/programs/ld-name.c:264 #: locale/programs/ld-numeric.c:326 locale/programs/ld-paper.c:214 #: locale/programs/ld-telephone.c:278 locale/programs/ld-time.c:943 #: locale/programs/repertoire.c:313 #, c-format msgid "%1$s: definition does not end with `END %1$s'" msgstr "%1$s：定义不以“END %1$s”结尾" #: locale/programs/charmap.c:643 msgid "only WIDTH definitions are allowed to follow the CHARMAP definition" msgstr "" #: locale/programs/charmap.c:651 locale/programs/charmap.c:714 #, c-format msgid "value for %s must be an integer" msgstr "%s 的值必须为整数" #: locale/programs/charmap.c:842 #, c-format msgid "%s: error in state machine" msgstr "%s：状态机出错" #: locale/programs/charmap.c:850 locale/programs/ld-address.c:544 #: locale/programs/ld-collate.c:2623 locale/programs/ld-collate.c:3977 #: locale/programs/ld-ctype.c:2159 locale/programs/ld-ctype.c:2930 #: locale/programs/ld-identification.c:384 #: locale/programs/ld-measurement.c:231 locale/programs/ld-messages.c:314 #: locale/programs/ld-monetary.c:756 locale/programs/ld-name.c:280 #: locale/programs/ld-numeric.c:342 locale/programs/ld-paper.c:230 #: locale/programs/ld-telephone.c:294 locale/programs/ld-time.c:959 #: locale/programs/locfile.c:1000 locale/programs/repertoire.c:324 #, c-format msgid "%s: premature end of file" msgstr "%s：文件不完整" #: locale/programs/charmap.c:869 locale/programs/charmap.c:880 #, c-format msgid "unknown character `%s'" msgstr "未知的字符“%s”" #: locale/programs/charmap.c:888 #, c-format msgid "number of bytes for byte sequence of beginning and end of range not the same: %d vs %d" msgstr "" #: locale/programs/charmap.c:993 locale/programs/ld-collate.c:2903 #: locale/programs/repertoire.c:419 msgid "invalid names for character range" msgstr "" #: locale/programs/charmap.c:1005 locale/programs/repertoire.c:431 msgid "hexadecimal range format should use only capital characters" msgstr "" #: locale/programs/charmap.c:1023 locale/programs/repertoire.c:449 #, c-format msgid "<%s> and <%s> are invalid names for range" msgstr "<%s> 和 <%s> 是无效的范围名" #: locale/programs/charmap.c:1029 locale/programs/repertoire.c:456 msgid "upper limit in range is smaller than lower limit" msgstr "范围的上限小于下限" #: locale/programs/charmap.c:1087 msgid "resulting bytes for range not representable." msgstr "" #: locale/programs/ld-address.c:135 locale/programs/ld-collate.c:1565 #: locale/programs/ld-ctype.c:465 locale/programs/ld-identification.c:133 #: locale/programs/ld-measurement.c:94 locale/programs/ld-messages.c:97 #: locale/programs/ld-monetary.c:193 locale/programs/ld-name.c:94 #: locale/programs/ld-numeric.c:98 locale/programs/ld-paper.c:91 #: locale/programs/ld-telephone.c:94 locale/programs/ld-time.c:159 #, c-format msgid "No definition for %s category found" msgstr "" #: locale/programs/ld-address.c:146 locale/programs/ld-address.c:184 #: locale/programs/ld-address.c:202 locale/programs/ld-address.c:231 #: locale/programs/ld-address.c:303 locale/programs/ld-address.c:322 #: locale/programs/ld-address.c:335 locale/programs/ld-identification.c:146 #: locale/programs/ld-measurement.c:105 locale/programs/ld-monetary.c:205 #: locale/programs/ld-monetary.c:249 locale/programs/ld-monetary.c:265 #: locale/programs/ld-monetary.c:277 locale/programs/ld-name.c:105 #: locale/programs/ld-name.c:142 locale/programs/ld-numeric.c:112 #: locale/programs/ld-numeric.c:126 locale/programs/ld-paper.c:102 #: locale/programs/ld-paper.c:111 locale/programs/ld-telephone.c:105 #: locale/programs/ld-telephone.c:162 locale/programs/ld-time.c:175 #: locale/programs/ld-time.c:196 #, c-format msgid "%s: field `%s' not defined" msgstr "%s：域“%s”未定义" #: locale/programs/ld-address.c:158 locale/programs/ld-address.c:210 #: locale/programs/ld-address.c:240 locale/programs/ld-address.c:278 #: locale/programs/ld-name.c:117 locale/programs/ld-telephone.c:117 #, c-format msgid "%s: field `%s' must not be empty" msgstr "%s：域“%s”不能为空" #: locale/programs/ld-address.c:170 #, c-format msgid "%s: invalid escape `%%%c' sequence in field `%s'" msgstr "%1$s：域“%3$s”中无效的转义“%%%2$c”序列" #: locale/programs/ld-address.c:221 #, c-format msgid "%s: terminology language code `%s' not defined" msgstr "" #: locale/programs/ld-address.c:246 #, c-format msgid "%s: field `%s' must not be defined" msgstr "%s：域“%s”必须未定义" #: locale/programs/ld-address.c:260 locale/programs/ld-address.c:289 #, c-format msgid "%s: language abbreviation `%s' not defined" msgstr "%s：未定义的语言缩写“%s”" #: locale/programs/ld-address.c:267 locale/programs/ld-address.c:295 #: locale/programs/ld-address.c:329 locale/programs/ld-address.c:341 #, c-format msgid "%s: `%s' value does not match `%s' value" msgstr "%s：“%s”的值不能匹配“%s”的值" #: locale/programs/ld-address.c:314 #, c-format msgid "%s: numeric country code `%d' not valid" msgstr "%s：数值国家编码“%d”无效" #: locale/programs/ld-address.c:436 locale/programs/ld-address.c:473 #: locale/programs/ld-address.c:511 locale/programs/ld-ctype.c:2537 #: locale/programs/ld-identification.c:280 #: locale/programs/ld-measurement.c:198 locale/programs/ld-messages.c:267 #: locale/programs/ld-monetary.c:495 locale/programs/ld-monetary.c:530 #: locale/programs/ld-monetary.c:571 locale/programs/ld-name.c:237 #: locale/programs/ld-numeric.c:218 locale/programs/ld-paper.c:197 #: locale/programs/ld-telephone.c:253 locale/programs/ld-time.c:848 #: locale/programs/ld-time.c:890 #, c-format msgid "%s: field `%s' declared more than once" msgstr "%s：多次声明域“%s”" #: locale/programs/ld-address.c:440 locale/programs/ld-address.c:478 #: locale/programs/ld-identification.c:284 locale/programs/ld-messages.c:277 #: locale/programs/ld-monetary.c:499 locale/programs/ld-monetary.c:534 #: locale/programs/ld-name.c:241 locale/programs/ld-numeric.c:222 #: locale/programs/ld-telephone.c:257 locale/programs/ld-time.c:742 #: locale/programs/ld-time.c:811 locale/programs/ld-time.c:853 #, c-format msgid "%s: unknown character in field `%s'" msgstr "%s：域“%s”中含有未知字符" #: locale/programs/ld-address.c:525 locale/programs/ld-collate.c:3782 #: locale/programs/ld-ctype.c:2910 locale/programs/ld-identification.c:365 #: locale/programs/ld-measurement.c:212 locale/programs/ld-messages.c:296 #: locale/programs/ld-monetary.c:738 locale/programs/ld-name.c:262 #: locale/programs/ld-numeric.c:324 locale/programs/ld-paper.c:212 #: locale/programs/ld-telephone.c:276 locale/programs/ld-time.c:941 #, c-format msgid "%s: incomplete `END' line" msgstr "%s：不完整的“END”行" #: locale/programs/ld-address.c:535 locale/programs/ld-collate.c:551 #: locale/programs/ld-collate.c:603 locale/programs/ld-collate.c:899 #: locale/programs/ld-collate.c:912 locale/programs/ld-collate.c:2592 #: locale/programs/ld-collate.c:2613 locale/programs/ld-collate.c:3967 #: locale/programs/ld-ctype.c:1891 locale/programs/ld-ctype.c:2149 #: locale/programs/ld-ctype.c:2735 locale/programs/ld-ctype.c:2921 #: locale/programs/ld-identification.c:375 #: locale/programs/ld-measurement.c:222 locale/programs/ld-messages.c:305 #: locale/programs/ld-monetary.c:747 locale/programs/ld-name.c:271 #: locale/programs/ld-numeric.c:333 locale/programs/ld-paper.c:221 #: locale/programs/ld-telephone.c:285 locale/programs/ld-time.c:950 #, c-format msgid "%s: syntax error" msgstr "%s：语法错误" #: locale/programs/ld-collate.c:426 #, c-format msgid "`%.*s' already defined in charmap" msgstr "已经在字符映射表中定义了“%.*s”" #: locale/programs/ld-collate.c:435 #, c-format msgid "`%.*s' already defined in repertoire" msgstr "已经在指令表中定义了“%.*s”" #: locale/programs/ld-collate.c:442 #, c-format msgid "`%.*s' already defined as collating symbol" msgstr "" #: locale/programs/ld-collate.c:449 #, c-format msgid "`%.*s' already defined as collating element" msgstr "" #: locale/programs/ld-collate.c:480 locale/programs/ld-collate.c:506 #, c-format msgid "%s: `forward' and `backward' are mutually excluding each other" msgstr "%s：“forward”和“backward”是互斥的" #: locale/programs/ld-collate.c:490 locale/programs/ld-collate.c:516 #: locale/programs/ld-collate.c:532 #, c-format msgid "%s: `%s' mentioned more than once in definition of weight %d" msgstr "" #: locale/programs/ld-collate.c:588 #, c-format msgid "%s: too many rules; first entry only had %d" msgstr "%s：规则过多；第一个条目只含有 %d" #: locale/programs/ld-collate.c:624 #, c-format msgid "%s: not enough sorting rules" msgstr "%s：排序规则不足" #: locale/programs/ld-collate.c:789 #, c-format msgid "%s: empty weight string not allowed" msgstr "%s：不允许空权字符串" #: locale/programs/ld-collate.c:884 #, c-format msgid "%s: weights must use the same ellipsis symbol as the name" msgstr "" #: locale/programs/ld-collate.c:940 #, c-format msgid "%s: too many values" msgstr "%s：值过多" #: locale/programs/ld-collate.c:1060 locale/programs/ld-collate.c:1235 #, c-format msgid "order for `%.*s' already defined at %s:%Zu" msgstr "" #: locale/programs/ld-collate.c:1110 #, c-format msgid "%s: the start and the end symbol of a range must stand for characters" msgstr "" #: locale/programs/ld-collate.c:1137 #, c-format msgid "%s: byte sequences of first and last character must have the same length" msgstr "%s：字节序列的第一个和最后一个字符的长度必须相同" #: locale/programs/ld-collate.c:1179 #, c-format msgid "%s: byte sequence of first character of range is not lower than that of the last character" msgstr "%s：范围的字节序列的第一个字符不小于最后一个字符" #: locale/programs/ld-collate.c:1304 #, c-format msgid "%s: symbolic range ellipsis must not directly follow `order_start'" msgstr "" #: locale/programs/ld-collate.c:1308 #, c-format msgid "%s: symbolic range ellipsis must not be directly followed by `order_end'" msgstr "" #: locale/programs/ld-collate.c:1328 locale/programs/ld-ctype.c:1408 #, c-format msgid "`%s' and `%.*s' are not valid names for symbolic range" msgstr "“%s”和“%.*s”是无效的符号范围名" #: locale/programs/ld-collate.c:1378 locale/programs/ld-collate.c:3718 #, c-format msgid "%s: order for `%.*s' already defined at %s:%Zu" msgstr "" #: locale/programs/ld-collate.c:1387 #, c-format msgid "%s: `%s' must be a character" msgstr "%s：“%s”必须是一个字符" #: locale/programs/ld-collate.c:1582 #, c-format msgid "%s: `position' must be used for a specific level in all sections or none" msgstr "" #: locale/programs/ld-collate.c:1607 #, c-format msgid "symbol `%s' not defined" msgstr "符号“%s”未定义" #: locale/programs/ld-collate.c:1683 locale/programs/ld-collate.c:1789 #, c-format msgid "symbol `%s' has the same encoding as" msgstr "" #: locale/programs/ld-collate.c:1687 locale/programs/ld-collate.c:1793 #, c-format msgid "symbol `%s'" msgstr "符号“%s”" #: locale/programs/ld-collate.c:1833 #, c-format msgid "no definition of `UNDEFINED'" msgstr "没有关于“UNDEFINIED”的定义" #: locale/programs/ld-collate.c:1862 #, c-format msgid "too many errors; giving up" msgstr "错误过多；放弃" #: locale/programs/ld-collate.c:2518 locale/programs/ld-collate.c:3906 #, c-format msgid "%s: nested conditionals not supported" msgstr "%s: 不支持嵌套条件" #: locale/programs/ld-collate.c:2536 #, fuzzy, c-format #| msgid "%s: more then one 'else'" msgid "%s: more than one 'else'" msgstr "%s: 多于一个'else'" #: locale/programs/ld-collate.c:2711 #, c-format msgid "%s: duplicate definition of `%s'" msgstr "%s：重复定义“%s”" #: locale/programs/ld-collate.c:2747 #, c-format msgid "%s: duplicate declaration of section `%s'" msgstr "%s：重复声明节“%s”" #: locale/programs/ld-collate.c:2883 #, c-format msgid "%s: unknown character in collating symbol name" msgstr "" #: locale/programs/ld-collate.c:3012 #, c-format msgid "%s: unknown character in equivalent definition name" msgstr "%s：等价定义名中未知的字符" #: locale/programs/ld-collate.c:3023 #, c-format msgid "%s: unknown character in equivalent definition value" msgstr "%s：等价定义值中未知的字符" #: locale/programs/ld-collate.c:3033 #, c-format msgid "%s: unknown symbol `%s' in equivalent definition" msgstr "%s：等价定义中未知的符号“%s”" #: locale/programs/ld-collate.c:3042 msgid "error while adding equivalent collating symbol" msgstr "" #: locale/programs/ld-collate.c:3080 #, c-format msgid "duplicate definition of script `%s'" msgstr "重复定义脚本“%s”" #: locale/programs/ld-collate.c:3128 #, c-format msgid "%s: unknown section name `%.*s'" msgstr "%s：未知的节名“%.*s”" #: locale/programs/ld-collate.c:3157 #, c-format msgid "%s: multiple order definitions for section `%s'" msgstr "%s：关于“%s”节出现多个顺序定义" #: locale/programs/ld-collate.c:3185 #, c-format msgid "%s: invalid number of sorting rules" msgstr "%s：排序规则的数量无效" #: locale/programs/ld-collate.c:3212 #, c-format msgid "%s: multiple order definitions for unnamed section" msgstr "%s：关于未命名节出现多个顺序定义" #: locale/programs/ld-collate.c:3267 locale/programs/ld-collate.c:3397 #: locale/programs/ld-collate.c:3760 #, c-format msgid "%s: missing `order_end' keyword" msgstr "%s：遗漏关键字“order_end”" #: locale/programs/ld-collate.c:3330 #, c-format msgid "%s: order for collating symbol %.*s not yet defined" msgstr "" #: locale/programs/ld-collate.c:3348 #, c-format msgid "%s: order for collating element %.*s not yet defined" msgstr "" #: locale/programs/ld-collate.c:3359 #, c-format msgid "%s: cannot reorder after %.*s: symbol not known" msgstr "" #: locale/programs/ld-collate.c:3411 locale/programs/ld-collate.c:3772 #, c-format msgid "%s: missing `reorder-end' keyword" msgstr "%s：以后关键字“reorder-end”" #: locale/programs/ld-collate.c:3445 locale/programs/ld-collate.c:3643 #, c-format msgid "%s: section `%.*s' not known" msgstr "%s：未知的节“%.*s”" #: locale/programs/ld-collate.c:3510 #, c-format msgid "%s: bad symbol <%.*s>" msgstr "" #: locale/programs/ld-collate.c:3706 #, c-format msgid "%s: cannot have `%s' as end of ellipsis range" msgstr "" #: locale/programs/ld-collate.c:3756 #, c-format msgid "%s: empty category description not allowed" msgstr "%s：不允许空范畴描述" #: locale/programs/ld-collate.c:3775 #, c-format msgid "%s: missing `reorder-sections-end' keyword" msgstr "%s：遗漏关键字“reorder-sections-end”" #: locale/programs/ld-collate.c:3939 #, c-format msgid "%s: '%s' without matching 'ifdef' or 'ifndef'" msgstr "" #: locale/programs/ld-collate.c:3957 #, c-format msgid "%s: 'endif' without matching 'ifdef' or 'ifndef'" msgstr "" #: locale/programs/ld-ctype.c:484 #, c-format msgid "No character set name specified in charmap" msgstr "字符映射表中未给出字符集名称" #: locale/programs/ld-ctype.c:513 #, c-format msgid "character L'\\u%0*x' in class `%s' must be in class `%s'" msgstr "" # msgstr "类“%2$s”中的字符 L'\\u%0*x' 必须属于类“%3$s”" #: locale/programs/ld-ctype.c:528 #, c-format msgid "character L'\\u%0*x' in class `%s' must not be in class `%s'" msgstr "" #: locale/programs/ld-ctype.c:542 locale/programs/ld-ctype.c:600 #, c-format msgid "internal error in %s, line %u" msgstr "在 %s 的第 %u 行出现内部错误" #: locale/programs/ld-ctype.c:571 #, c-format msgid "character '%s' in class `%s' must be in class `%s'" msgstr "类“%2$s”中的字符“%1$s”必须属于类“%3$s”" #: locale/programs/ld-ctype.c:587 #, c-format msgid "character '%s' in class `%s' must not be in class `%s'" msgstr "类“%2$s”中的字符“%1$s”不得属于类“%3$s”" #: locale/programs/ld-ctype.c:617 locale/programs/ld-ctype.c:655 #, c-format msgid " character not in class `%s'" msgstr "字符 不在类“%s”中" #: locale/programs/ld-ctype.c:629 locale/programs/ld-ctype.c:666 #, c-format msgid " character must not be in class `%s'" msgstr "字符 不能属于类“%s”" #: locale/programs/ld-ctype.c:644 #, c-format msgid "character not defined in character map" msgstr "字符映射中未定义字符 " #: locale/programs/ld-ctype.c:780 #, c-format msgid "`digit' category has not entries in groups of ten" msgstr "" #: locale/programs/ld-ctype.c:829 #, c-format msgid "no input digits defined and none of the standard names in the charmap" msgstr "" #: locale/programs/ld-ctype.c:894 #, c-format msgid "not all characters used in `outdigit' are available in the charmap" msgstr "" #: locale/programs/ld-ctype.c:911 #, c-format msgid "not all characters used in `outdigit' are available in the repertoire" msgstr "" #: locale/programs/ld-ctype.c:1176 #, c-format msgid "character class `%s' already defined" msgstr "字符类“%s”已定义" #: locale/programs/ld-ctype.c:1182 #, c-format msgid "implementation limit: no more than %Zd character classes allowed" msgstr "" #: locale/programs/ld-ctype.c:1208 #, c-format msgid "character map `%s' already defined" msgstr "" #: locale/programs/ld-ctype.c:1214 #, c-format msgid "implementation limit: no more than %d character maps allowed" msgstr "实现限制：不得多于 %d 个字符映射表" #: locale/programs/ld-ctype.c:1479 locale/programs/ld-ctype.c:1604 #: locale/programs/ld-ctype.c:1710 locale/programs/ld-ctype.c:2400 #: locale/programs/ld-ctype.c:3397 #, c-format msgid "%s: field `%s' does not contain exactly ten entries" msgstr "%s：域“%s”含有条目的个数不是十个" #: locale/programs/ld-ctype.c:1507 locale/programs/ld-ctype.c:2081 #, c-format msgid "to-value of range is smaller than from-value " msgstr "" #: locale/programs/ld-ctype.c:1634 msgid "start and end character sequence of range must have the same length" msgstr "范围的起始和终止字符序列必须具有相同的长度" #: locale/programs/ld-ctype.c:1641 msgid "to-value character sequence is smaller than from-value sequence" msgstr "" #: locale/programs/ld-ctype.c:2001 locale/programs/ld-ctype.c:2052 msgid "premature end of `translit_ignore' definition" msgstr "" #: locale/programs/ld-ctype.c:2007 locale/programs/ld-ctype.c:2058 #: locale/programs/ld-ctype.c:2100 msgid "syntax error" msgstr "语法错误" #: locale/programs/ld-ctype.c:2233 #, c-format msgid "%s: syntax error in definition of new character class" msgstr "%s：在定义新字符集合中出现语法错误" #: locale/programs/ld-ctype.c:2248 #, c-format msgid "%s: syntax error in definition of new character map" msgstr "%s：在新字符映射中出现语法错误" #: locale/programs/ld-ctype.c:2422 msgid "ellipsis range must be marked by two operands of same type" msgstr "" #: locale/programs/ld-ctype.c:2431 msgid "with symbolic name range values the absolute ellipsis `...' must not be used" msgstr "" #: locale/programs/ld-ctype.c:2446 msgid "with UCS range values one must use the hexadecimal symbolic ellipsis `..'" msgstr "" #: locale/programs/ld-ctype.c:2460 msgid "with character code range values one must use the absolute ellipsis `...'" msgstr "" #: locale/programs/ld-ctype.c:2611 #, c-format msgid "duplicated definition for mapping `%s'" msgstr "重复定义映射“%s”" #: locale/programs/ld-ctype.c:2697 locale/programs/ld-ctype.c:2841 #, c-format msgid "%s: `translit_start' section does not end with `translit_end'" msgstr "%s：“translit_start”节不以“translit_end”结束" #: locale/programs/ld-ctype.c:2792 #, c-format msgid "%s: duplicate `default_missing' definition" msgstr "%s：重复定义“default_missing”" #: locale/programs/ld-ctype.c:2797 msgid "previous definition was here" msgstr "前一个定义在这里" #: locale/programs/ld-ctype.c:2819 #, c-format msgid "%s: no representable `default_missing' definition found" msgstr "" #: locale/programs/ld-ctype.c:2962 locale/programs/ld-ctype.c:3059 #: locale/programs/ld-ctype.c:3079 locale/programs/ld-ctype.c:3100 #: locale/programs/ld-ctype.c:3121 locale/programs/ld-ctype.c:3142 #: locale/programs/ld-ctype.c:3163 locale/programs/ld-ctype.c:3203 #: locale/programs/ld-ctype.c:3224 locale/programs/ld-ctype.c:3289 #: locale/programs/ld-ctype.c:3331 locale/programs/ld-ctype.c:3356 #, c-format msgid "%s: character `%s' not defined while needed as default value" msgstr "" #: locale/programs/ld-ctype.c:2967 locale/programs/ld-ctype.c:3064 #: locale/programs/ld-ctype.c:3084 locale/programs/ld-ctype.c:3105 #: locale/programs/ld-ctype.c:3126 locale/programs/ld-ctype.c:3147 #: locale/programs/ld-ctype.c:3168 locale/programs/ld-ctype.c:3208 #: locale/programs/ld-ctype.c:3229 locale/programs/ld-ctype.c:3294 #, c-format msgid "%s: character `%s' in charmap not representable with one byte" msgstr "" #: locale/programs/ld-ctype.c:3338 locale/programs/ld-ctype.c:3363 #, c-format msgid "%s: character `%s' needed as default value not representable with one byte" msgstr "%s：需要作为默认值的字符“%s”无法以单个字节来表示" #: locale/programs/ld-ctype.c:3419 #, c-format msgid "no output digits defined and none of the standard names in the charmap" msgstr "" #: locale/programs/ld-ctype.c:3668 #, c-format msgid "%s: transliteration data from locale `%s' not available" msgstr "" #: locale/programs/ld-ctype.c:3768 #, c-format msgid "%s: table for class \"%s\": %lu bytes\n" msgstr "" #: locale/programs/ld-ctype.c:3833 #, c-format msgid "%s: table for map \"%s\": %lu bytes\n" msgstr "" #: locale/programs/ld-ctype.c:3958 #, c-format msgid "%s: table for width: %lu bytes\n" msgstr "" #: locale/programs/ld-identification.c:170 #, c-format msgid "%s: no identification for category `%s'" msgstr "" #: locale/programs/ld-identification.c:351 #, c-format msgid "%s: duplicate category version definition" msgstr "" #: locale/programs/ld-measurement.c:113 #, c-format msgid "%s: invalid value for field `%s'" msgstr "%s：域“%s”中的值无效" #: locale/programs/ld-messages.c:114 locale/programs/ld-messages.c:148 #, c-format msgid "%s: field `%s' undefined" msgstr "%s：解除域“%s”的定义" #: locale/programs/ld-messages.c:121 locale/programs/ld-messages.c:155 #: locale/programs/ld-monetary.c:255 locale/programs/ld-numeric.c:118 #, c-format msgid "%s: value for field `%s' must not be an empty string" msgstr "%s：域“%s”的值不能是空字符串" #: locale/programs/ld-messages.c:137 locale/programs/ld-messages.c:171 #, c-format msgid "%s: no correct regular expression for field `%s': %s" msgstr "%s：域“%s”中没有正确的常规表达式：%s" #: locale/programs/ld-monetary.c:223 #, c-format msgid "%s: value of field `int_curr_symbol' has wrong length" msgstr "%s：域“int_curr_symbol”的值的长度错误" #: locale/programs/ld-monetary.c:236 #, c-format msgid "%s: value of field `int_curr_symbol' does not correspond to a valid name in ISO 4217" msgstr "%s：域“int_curr_symbol”的值于 ISO 4217 中任何一个合法的名称都不对应" #: locale/programs/ld-monetary.c:284 locale/programs/ld-monetary.c:314 #, c-format msgid "%s: value for field `%s' must be in range %d...%d" msgstr "%s：“%s”域的值必须在 %d...%d 的范围内" #: locale/programs/ld-monetary.c:541 locale/programs/ld-numeric.c:229 #, c-format msgid "%s: value for field `%s' must be a single character" msgstr "%s：“%s”域的值必须是单个字符" #: locale/programs/ld-monetary.c:638 locale/programs/ld-numeric.c:273 #, c-format msgid "%s: `-1' must be last entry in `%s' field" msgstr "%s：“-1”必须是“%s”域中的最后一个条目" #: locale/programs/ld-monetary.c:660 locale/programs/ld-numeric.c:290 #, c-format msgid "%s: values for field `%s' must be smaller than 127" msgstr "%s：域“%s”的值必须小于 127" #: locale/programs/ld-monetary.c:706 msgid "conversion rate value cannot be zero" msgstr "转换率的值不能为 0" #: locale/programs/ld-name.c:129 locale/programs/ld-telephone.c:126 #: locale/programs/ld-telephone.c:149 #, c-format msgid "%s: invalid escape sequence in field `%s'" msgstr "%s：域“%s”中含有无效转义序列" #: locale/programs/ld-time.c:247 #, c-format msgid "%s: direction flag in string %Zd in `era' field is not '+' nor '-'" msgstr "" #: locale/programs/ld-time.c:258 #, c-format msgid "%s: direction flag in string %Zd in `era' field is not a single character" msgstr "" #: locale/programs/ld-time.c:271 #, c-format msgid "%s: invalid number for offset in string %Zd in `era' field" msgstr "" #: locale/programs/ld-time.c:279 #, c-format msgid "%s: garbage at end of offset value in string %Zd in `era' field" msgstr "" #: locale/programs/ld-time.c:330 #, c-format msgid "%s: invalid starting date in string %Zd in `era' field" msgstr "" #: locale/programs/ld-time.c:339 #, c-format msgid "%s: garbage at end of starting date in string %Zd in `era' field " msgstr "" #: locale/programs/ld-time.c:358 #, c-format msgid "%s: starting date is invalid in string %Zd in `era' field" msgstr "" #: locale/programs/ld-time.c:407 locale/programs/ld-time.c:435 #, c-format msgid "%s: invalid stopping date in string %Zd in `era' field" msgstr "" #: locale/programs/ld-time.c:416 #, c-format msgid "%s: garbage at end of stopping date in string %Zd in `era' field" msgstr "" #: locale/programs/ld-time.c:444 #, c-format msgid "%s: missing era name in string %Zd in `era' field" msgstr "" #: locale/programs/ld-time.c:456 #, c-format msgid "%s: missing era format in string %Zd in `era' field" msgstr "" #: locale/programs/ld-time.c:497 #, c-format msgid "%s: third operand for value of field `%s' must not be larger than %d" msgstr "" #: locale/programs/ld-time.c:505 locale/programs/ld-time.c:513 #: locale/programs/ld-time.c:521 #, c-format msgid "%s: values for field `%s' must not be larger than %d" msgstr "%s：域“%s”的值不能大于 %d" #: locale/programs/ld-time.c:726 #, c-format msgid "%s: too few values for field `%s'" msgstr "%s：域“%s”的值过少" #: locale/programs/ld-time.c:771 msgid "extra trailing semicolon" msgstr "多余的终止分号" #: locale/programs/ld-time.c:774 #, c-format msgid "%s: too many values for field `%s'" msgstr "%s：域“%s”的值过多" #: locale/programs/linereader.c:130 msgid "trailing garbage at end of line" msgstr "" #: locale/programs/linereader.c:298 msgid "garbage at end of number" msgstr "数字末尾有垃圾" #: locale/programs/linereader.c:410 msgid "garbage at end of character code specification" msgstr "" #: locale/programs/linereader.c:496 msgid "unterminated symbolic name" msgstr "未终止的符号名" #: locale/programs/linereader.c:623 msgid "illegal escape sequence at end of string" msgstr "字符串末尾的非法转义序列" #: locale/programs/linereader.c:627 locale/programs/linereader.c:855 msgid "unterminated string" msgstr "未终止的字符串" #: locale/programs/linereader.c:669 msgid "non-symbolic character value should not be used" msgstr "不应该使用非符号字符的值" #: locale/programs/linereader.c:816 #, c-format msgid "symbol `%.*s' not in charmap" msgstr "" #: locale/programs/linereader.c:837 #, c-format msgid "symbol `%.*s' not in repertoire map" msgstr "" #: locale/programs/locale-spec.c:130 #, fuzzy, c-format #| msgid "unknown set `%s'" msgid "unknown name \"%s\"" msgstr "未知集合“%s”" #: locale/programs/locale.c:72 msgid "System information:" msgstr "系统信息：" #: locale/programs/locale.c:74 msgid "Write names of available locales" msgstr "写出可用区域的名称" #: locale/programs/locale.c:76 msgid "Write names of available charmaps" msgstr "写出可用字符映射的名称" #: locale/programs/locale.c:77 msgid "Modify output format:" msgstr "修改输出格式：" #: locale/programs/locale.c:78 msgid "Write names of selected categories" msgstr "写出选中范畴的名称" #: locale/programs/locale.c:79 msgid "Write names of selected keywords" msgstr "写出选中关键字的名称" #: locale/programs/locale.c:80 msgid "Print more information" msgstr "打印更多信息" #: locale/programs/locale.c:85 msgid "Get locale-specific information." msgstr "给出区域特定的信息。" #: locale/programs/locale.c:88 msgid "" "NAME\n" "[-a|-m]" msgstr "" #: locale/programs/locale.c:192 #, c-format msgid "Cannot set LC_CTYPE to default locale" msgstr "" #: locale/programs/locale.c:194 #, c-format msgid "Cannot set LC_MESSAGES to default locale" msgstr "" #: locale/programs/locale.c:207 #, c-format msgid "Cannot set LC_COLLATE to default locale" msgstr "" #: locale/programs/locale.c:223 #, c-format msgid "Cannot set LC_ALL to default locale" msgstr "" #: locale/programs/locale.c:519 #, c-format msgid "while preparing output" msgstr "准备输出时" #: locale/programs/localedef.c:121 msgid "Input Files:" msgstr "输入文件：" #: locale/programs/localedef.c:123 msgid "Symbolic character names defined in FILE" msgstr "" #: locale/programs/localedef.c:125 msgid "Source definitions are found in FILE" msgstr "在 FILE 中找到源定义" #: locale/programs/localedef.c:127 msgid "FILE contains mapping from symbolic names to UCS4 values" msgstr "" #: locale/programs/localedef.c:131 msgid "Create output even if warning messages were issued" msgstr "即使出现警告消息也创建输出" #: locale/programs/localedef.c:132 msgid "Create old-style tables" msgstr "创建旧风格表格" #: locale/programs/localedef.c:133 msgid "Optional output file prefix" msgstr "可选的输出文件前缀" #: locale/programs/localedef.c:134 #, fuzzy #| msgid "Be strictly POSIX conform" msgid "Strictly conform to POSIX" msgstr "严格遵循 POSIX" #: locale/programs/localedef.c:136 msgid "Suppress warnings and information messages" msgstr "关闭警告和信息消息" #: locale/programs/localedef.c:137 msgid "Print more messages" msgstr "打印更多消息" #: locale/programs/localedef.c:138 msgid "Archive control:" msgstr "归档控制：" #: locale/programs/localedef.c:140 msgid "Don't add new data to archive" msgstr "不要将新数据添加到归档文件中" #: locale/programs/localedef.c:142 msgid "Add locales named by parameters to archive" msgstr "将由参数命名的区域添加到归档文件中" #: locale/programs/localedef.c:143 msgid "Replace existing archive content" msgstr "替换现有的归档文件内容" #: locale/programs/localedef.c:145 msgid "Remove locales named by parameters from archive" msgstr "从归档文件中删除由参数命名的区域" #: locale/programs/localedef.c:146 msgid "List content of archive" msgstr "列出归档文件的内容" #: locale/programs/localedef.c:148 msgid "locale.alias file to consult when making archive" msgstr "在制作归档文件时参考 locale.alias 文件" #: locale/programs/localedef.c:150 msgid "Generate little-endian output" msgstr "" #: locale/programs/localedef.c:152 msgid "Generate big-endian output" msgstr "" #: locale/programs/localedef.c:157 msgid "Compile locale specification" msgstr "编译区域规范" #: locale/programs/localedef.c:160 msgid "" "NAME\n" "[--add-to-archive|--delete-from-archive] FILE...\n" "--list-archive [FILE]" msgstr "" "名称\n" "[--add-to-archive|--delete-from-archive] 文件...\n" "--list-archive [文件]" #: locale/programs/localedef.c:235 #, c-format msgid "cannot create directory for output files" msgstr "无法为输出文件创建目录" #: locale/programs/localedef.c:246 #, c-format msgid "FATAL: system does not define `_POSIX2_LOCALEDEF'" msgstr "致命错误：系统未定义“_POSIX2_LOCALEDEF”" #: locale/programs/localedef.c:260 locale/programs/localedef.c:276 #: locale/programs/localedef.c:614 locale/programs/localedef.c:634 #, c-format msgid "cannot open locale definition file `%s'" msgstr "无法打开区域定义文件“%s”" #: locale/programs/localedef.c:288 #, c-format msgid "cannot write output files to `%s'" msgstr "无法将输出文件写入“%s”" #: locale/programs/localedef.c:380 #, c-format msgid "" "System's directory for character maps : %s\n" "\t\t repertoire maps: %s\n" "\t\t locale path : %s\n" "%s" msgstr "" #: locale/programs/localedef.c:582 #, c-format msgid "circular dependencies between locale definitions" msgstr "区域定义中的循环倚赖" #: locale/programs/localedef.c:588 #, c-format msgid "cannot add already read locale `%s' a second time" msgstr "无法再次添加已经读入的“%s”" #: locale/programs/locarchive.c:133 locale/programs/locarchive.c:380 #, fuzzy, c-format #| msgid "cannot create temporary file" msgid "cannot create temporary file: %s" msgstr "无法创建临时文件" #: locale/programs/locarchive.c:167 locale/programs/locarchive.c:430 #, c-format msgid "cannot initialize archive file" msgstr "无法初始化归档文件" #: locale/programs/locarchive.c:174 locale/programs/locarchive.c:437 #, c-format msgid "cannot resize archive file" msgstr "无法改变归档文件的大小" #: locale/programs/locarchive.c:189 locale/programs/locarchive.c:452 #: locale/programs/locarchive.c:674 #, c-format msgid "cannot map archive header" msgstr "无法映射归档文件头" #: locale/programs/locarchive.c:211 #, c-format msgid "failed to create new locale archive" msgstr "无法创建新区域归档文件" #: locale/programs/locarchive.c:223 #, c-format msgid "cannot change mode of new locale archive" msgstr "无法改变新归档文件的模式" #: locale/programs/locarchive.c:324 #, fuzzy, c-format #| msgid "cannot add to locale archive" msgid "cannot read data from locale archive" msgstr "无法添加到区域归档文件" #: locale/programs/locarchive.c:355 #, c-format msgid "cannot map locale archive file" msgstr "无法映射区域归档文件" #: locale/programs/locarchive.c:460 #, c-format msgid "cannot lock new archive" msgstr "无法锁定新归档文件" #: locale/programs/locarchive.c:529 #, c-format msgid "cannot extend locale archive file" msgstr "无法扩展区域归档文件" #: locale/programs/locarchive.c:538 #, c-format msgid "cannot change mode of resized locale archive" msgstr "无法改变过大小的区域归档文件的模式" #: locale/programs/locarchive.c:546 #, c-format msgid "cannot rename new archive" msgstr "无法改变新归档文件的名称" #: locale/programs/locarchive.c:608 #, c-format msgid "cannot open locale archive \"%s\"" msgstr "无法打开区域归档文件“%s”" #: locale/programs/locarchive.c:613 #, c-format msgid "cannot stat locale archive \"%s\"" msgstr "无法对区域归档文件“%s”进行 stat() 操作" #: locale/programs/locarchive.c:632 #, c-format msgid "cannot lock locale archive \"%s\"" msgstr "无法锁定区域归档文件“%s”" #: locale/programs/locarchive.c:655 #, c-format msgid "cannot read archive header" msgstr "无法读入归档文件头" #: locale/programs/locarchive.c:728 #, c-format msgid "locale '%s' already exists" msgstr "区域“%s”已存在" #: locale/programs/locarchive.c:1003 locale/programs/locarchive.c:1018 #: locale/programs/locarchive.c:1030 locale/programs/locarchive.c:1042 #: locale/programs/locfile.c:350 #, c-format msgid "cannot add to locale archive" msgstr "无法添加到区域归档文件" #: locale/programs/locarchive.c:1206 #, c-format msgid "locale alias file `%s' not found" msgstr "找不到区域别名文件“%s”" #: locale/programs/locarchive.c:1357 #, c-format msgid "Adding %s\n" msgstr "正在添加 %s\n" #: locale/programs/locarchive.c:1363 #, c-format msgid "stat of \"%s\" failed: %s: ignored" msgstr "无法对“%s”运行 stat：%s：忽略" #: locale/programs/locarchive.c:1369 #, c-format msgid "\"%s\" is no directory; ignored" msgstr "“%s”不是目录；忽略" #: locale/programs/locarchive.c:1376 #, c-format msgid "cannot open directory \"%s\": %s: ignored" msgstr "无法打开目录“%s”：%s：忽略" #: locale/programs/locarchive.c:1448 #, c-format msgid "incomplete set of locale files in \"%s\"" msgstr "“%s”中的区域文件不完整" #: locale/programs/locarchive.c:1512 #, c-format msgid "cannot read all files in \"%s\": ignored" msgstr "无法读入“%s”中的所有文件：忽略" #: locale/programs/locarchive.c:1584 #, c-format msgid "locale \"%s\" not in archive" msgstr "区域“%s”在归档文件中" #: locale/programs/locfile.c:137 #, c-format msgid "argument to `%s' must be a single character" msgstr "“%s”的参数必须是单个字符" #: locale/programs/locfile.c:257 msgid "syntax error: not inside a locale definition section" msgstr "语法错误：不在区域定义节之中" #: locale/programs/locfile.c:800 #, c-format msgid "cannot open output file `%s' for category `%s'" msgstr "无法为范畴“%2$s”打开输出文件“%1$s”" #: locale/programs/locfile.c:824 #, c-format msgid "failure while writing data for category `%s'" msgstr "为范畴“%s”写入数据失败" #: locale/programs/locfile.c:920 #, c-format msgid "cannot create output file `%s' for category `%s'" msgstr "无法为范畴“%2$s”创建输出文件“%1$s”" #: locale/programs/locfile.c:956 #, fuzzy #| msgid "expect string argument for `copy'" msgid "expecting string argument for `copy'" msgstr "“copy”需要字符串参数" #: locale/programs/locfile.c:960 msgid "locale name should consist only of portable characters" msgstr "区域名称应该仅由可移植的字符组成" #: locale/programs/locfile.c:979 msgid "no other keyword shall be specified when `copy' is used" msgstr "使用“copy”时不应再使用其它关键字" #: locale/programs/locfile.c:993 #, c-format msgid "`%1$s' definition does not end with `END %1$s'" msgstr "对“%1$s”的定义并不以“END %1%s”结束" #: locale/programs/repertoire.c:229 locale/programs/repertoire.c:270 #: locale/programs/repertoire.c:295 #, c-format msgid "syntax error in repertoire map definition: %s" msgstr "" #: locale/programs/repertoire.c:271 msgid "no or value given" msgstr "即未给出 也未给出 " #: locale/programs/repertoire.c:331 #, c-format msgid "cannot save new repertoire map" msgstr "无法保存新的指令表" #: locale/programs/repertoire.c:342 #, c-format msgid "repertoire map file `%s' not found" msgstr "" #: login/programs/pt_chown.c:78 #, c-format msgid "Set the owner, group and access permission of the slave pseudo terminal corresponding to the master pseudo terminal passed on file descriptor `%d'. This is the helper program for the `grantpt' function. It is not intended to be run directly from the command line.\n" msgstr "" #: login/programs/pt_chown.c:92 #, c-format msgid "" "The owner is set to the current user, the group is set to `%s', and the access permission is set to `%o'.\n" "\n" "%s" msgstr "" #: login/programs/pt_chown.c:198 #, c-format msgid "too many arguments" msgstr "选项过多" #: login/programs/pt_chown.c:206 #, c-format msgid "needs to be installed setuid `root'" msgstr "" #: malloc/mcheck.c:346 msgid "memory is consistent, library is buggy\n" msgstr "内存不一致，库有错误\n" #: malloc/mcheck.c:349 msgid "memory clobbered before allocated block\n" msgstr "" #: malloc/mcheck.c:352 msgid "memory clobbered past end of allocated block\n" msgstr "" #: malloc/mcheck.c:355 msgid "block freed twice\n" msgstr "块释放了两次\n" #: malloc/mcheck.c:358 msgid "bogus mcheck_status, library is buggy\n" msgstr "" #: malloc/memusage.sh:32 #, fuzzy #| msgid "%s: option `%s' requires an argument\n" msgid "%s: option '%s' requires an argument\\n" msgstr "%s：选项“%s”需要一个参数\n" #: malloc/memusage.sh:38 msgid "" "Usage: memusage [OPTION]... PROGRAM [PROGRAMOPTION]...\n" "Profile memory usage of PROGRAM.\n" "\n" " -n,--progname=NAME Name of the program file to profile\n" " -p,--png=FILE Generate PNG graphic and store it in FILE\n" " -d,--data=FILE Generate binary data file and store it in FILE\n" " -u,--unbuffered Don't buffer output\n" " -b,--buffer=SIZE Collect SIZE entries before writing them out\n" " --no-timer Don't collect additional information through timer\n" " -m,--mmap Also trace mmap & friends\n" "\n" " -?,--help Print this help and exit\n" " --usage Give a short usage message\n" " -V,--version Print version information and exit\n" "\n" " The following options only apply when generating graphical output:\n" " -t,--time-based Make graph linear in time\n" " -T,--total Also draw graph of total memory use\n" " --title=STRING Use STRING as title of the graph\n" " -x,--x-size=SIZE Make graphic SIZE pixels wide\n" " -y,--y-size=SIZE Make graphic SIZE pixels high\n" "\n" "Mandatory arguments to long options are also mandatory for any corresponding\n" "short options.\n" "\n" msgstr "" #: malloc/memusage.sh:99 msgid "" "Syntax: memusage [--data=FILE] [--progname=NAME] [--png=FILE] [--unbuffered]\n" "\t [--buffer=SIZE] [--no-timer] [--time-based] [--total]\n" "\t [--title=STRING] [--x-size=SIZE] [--y-size=SIZE]\n" "\t PROGRAM [PROGRAMOPTION]..." msgstr "" #: malloc/memusage.sh:191 msgid "memusage: option \\`${1##*=}' is ambiguous" msgstr "memusage：选项“${1##*=}”具有二义性" #: malloc/memusage.sh:200 msgid "memusage: unrecognized option \\`$1'" msgstr "memusage：无法识别的选项“$1”" #: malloc/memusage.sh:213 msgid "No program name given" msgstr "未指定程序名" #: malloc/memusagestat.c:56 msgid "Name output file" msgstr "名输出文件" #: malloc/memusagestat.c:57 msgid "STRING" msgstr "" #: malloc/memusagestat.c:57 msgid "Title string used in output graphic" msgstr "用于输出图形的标题字符串" #: malloc/memusagestat.c:58 msgid "Generate output linear to time (default is linear to number of function calls)" msgstr "" #: malloc/memusagestat.c:62 msgid "Also draw graph for total memory consumption" msgstr "" #: malloc/memusagestat.c:63 msgid "VALUE" msgstr "" #: malloc/memusagestat.c:64 msgid "Make output graphic VALUE pixels wide" msgstr "" #: malloc/memusagestat.c:65 msgid "Make output graphic VALUE pixels high" msgstr "" #: malloc/memusagestat.c:70 msgid "Generate graphic from memory profiling data" msgstr "" #: malloc/memusagestat.c:73 msgid "DATAFILE [OUTFILE]" msgstr "数据文件 [输出文件]" #: misc/error.c:192 msgid "Unknown system error" msgstr "未知的系统错误" #: nis/nis_callback.c:188 msgid "unable to free arguments" msgstr "无法释放参数" #: nis/nis_error.h:1 nis/ypclnt.c:831 nis/ypclnt.c:919 posix/regcomp.c:137 #: sysdeps/gnu/errlist.c:21 msgid "Success" msgstr "成功" #: nis/nis_error.h:2 msgid "Probable success" msgstr "" #: nis/nis_error.h:3 msgid "Not found" msgstr "找不到" #: nis/nis_error.h:4 msgid "Probably not found" msgstr "" #: nis/nis_error.h:5 msgid "Cache expired" msgstr "缓冲器过期" #: nis/nis_error.h:6 msgid "NIS+ servers unreachable" msgstr "NIS+ 服务器不可达" #: nis/nis_error.h:7 msgid "Unknown object" msgstr "未知的对象" #: nis/nis_error.h:8 msgid "Server busy, try again" msgstr "服务器忙，重试" #: nis/nis_error.h:9 msgid "Generic system error" msgstr "通用系统错误" #: nis/nis_error.h:10 msgid "First/next chain broken" msgstr "" #. TRANS Permission denied; the file permissions do not allow the attempted operation. #: nis/nis_error.h:11 nis/ypclnt.c:876 sysdeps/gnu/errlist.c:158 msgid "Permission denied" msgstr "权限不够" #: nis/nis_error.h:12 msgid "Not owner" msgstr "不是所有者" #: nis/nis_error.h:13 msgid "Name not served by this server" msgstr "" #: nis/nis_error.h:14 msgid "Server out of memory" msgstr "服务器内存不足" #: nis/nis_error.h:15 msgid "Object with same name exists" msgstr "同名对象已存在" #: nis/nis_error.h:16 msgid "Not master server for this domain" msgstr "该域没有主服务器" #: nis/nis_error.h:17 msgid "Invalid object for operation" msgstr "操作无效的对象" #: nis/nis_error.h:18 msgid "Malformed name, or illegal name" msgstr "" #: nis/nis_error.h:19 msgid "Unable to create callback" msgstr "无法创建回调函数" #: nis/nis_error.h:20 msgid "Results sent to callback proc" msgstr "" #: nis/nis_error.h:21 msgid "Not found, no such name" msgstr "找不到，没有那个名字" #: nis/nis_error.h:22 msgid "Name/entry isn't unique" msgstr "名称/条目不唯一" #: nis/nis_error.h:23 msgid "Modification failed" msgstr "修改失败" #: nis/nis_error.h:24 msgid "Database for table does not exist" msgstr "表格数据库不存在" #: nis/nis_error.h:25 msgid "Entry/table type mismatch" msgstr "条目/表格类型不匹配" #: nis/nis_error.h:26 msgid "Link points to illegal name" msgstr "连接指向非法名称" #: nis/nis_error.h:27 msgid "Partial success" msgstr "部分成功" #: nis/nis_error.h:28 msgid "Too many attributes" msgstr "属性过多" #: nis/nis_error.h:29 msgid "Error in RPC subsystem" msgstr "RPC 子系统中出错" #: nis/nis_error.h:30 msgid "Missing or malformed attribute" msgstr "遗漏或畸形的属性" #: nis/nis_error.h:31 msgid "Named object is not searchable" msgstr "不能搜索命名对象" #: nis/nis_error.h:32 msgid "Error while talking to callback proc" msgstr "与回调函数交互时出错" #: nis/nis_error.h:33 msgid "Non NIS+ namespace encountered" msgstr "" #: nis/nis_error.h:34 msgid "Illegal object type for operation" msgstr "操作的非法对象类型" #: nis/nis_error.h:35 msgid "Passed object is not the same object on server" msgstr "" #: nis/nis_error.h:36 msgid "Modify operation failed" msgstr "修改操作失败" #: nis/nis_error.h:37 msgid "Query illegal for named table" msgstr "对命名表来说查询非法" #: nis/nis_error.h:38 msgid "Attempt to remove a non-empty table" msgstr "试图删除非空的表" #: nis/nis_error.h:39 msgid "Error in accessing NIS+ cold start file. Is NIS+ installed?" msgstr "访问 NIS+ 冷启动文件出错。NIS+ 安装了吗？" #: nis/nis_error.h:40 msgid "Full resync required for directory" msgstr "需要对目录进行完全的重新同步" #: nis/nis_error.h:41 msgid "NIS+ operation failed" msgstr "NIS+ 操作失败" #: nis/nis_error.h:42 msgid "NIS+ service is unavailable or not installed" msgstr "NIS+ 服务器不可用或未安装" #: nis/nis_error.h:43 msgid "Yes, 42 is the meaning of life" msgstr "" #: nis/nis_error.h:44 msgid "Unable to authenticate NIS+ server" msgstr "无法认证 NIS+ 服务器" #: nis/nis_error.h:45 msgid "Unable to authenticate NIS+ client" msgstr "无法认证 NIS+ 客户端" #: nis/nis_error.h:46 msgid "No file space on server" msgstr "服务器上没有文件空间" #: nis/nis_error.h:47 msgid "Unable to create process on server" msgstr "无法在服务器上创建进程" #: nis/nis_error.h:48 msgid "Master server busy, full dump rescheduled." msgstr "" #: nis/nis_local_names.c:121 #, c-format msgid "LOCAL entry for UID %d in directory %s not unique\n" msgstr "" #: nis/nis_print.c:51 msgid "UNKNOWN" msgstr "未知" #: nis/nis_print.c:109 msgid "BOGUS OBJECT\n" msgstr "" #: nis/nis_print.c:112 msgid "NO OBJECT\n" msgstr "无对象\n" #: nis/nis_print.c:115 msgid "DIRECTORY\n" msgstr "目录\n" #: nis/nis_print.c:118 msgid "GROUP\n" msgstr "组\n" #: nis/nis_print.c:121 msgid "TABLE\n" msgstr "表\n" #: nis/nis_print.c:124 msgid "ENTRY\n" msgstr "条目\n" #: nis/nis_print.c:127 msgid "LINK\n" msgstr "连接\n" #: nis/nis_print.c:130 msgid "PRIVATE\n" msgstr "私有\n" #: nis/nis_print.c:133 msgid "(Unknown object)\n" msgstr "(未知对象)\n" #: nis/nis_print.c:167 #, c-format msgid "Name : `%s'\n" msgstr "名称 ：“%s”\n" #: nis/nis_print.c:168 #, c-format msgid "Type : %s\n" msgstr "类型 ： %s\n" #: nis/nis_print.c:173 msgid "Master Server :\n" msgstr "主服务器 ：\n" #: nis/nis_print.c:175 msgid "Replicate :\n" msgstr "" #: nis/nis_print.c:176 #, c-format msgid "\tName : %s\n" msgstr "\t名称 ：%s\n" #: nis/nis_print.c:177 msgid "\tPublic Key : " msgstr "\t公钥 ：" #: nis/nis_print.c:181 msgid "None.\n" msgstr "无。\n" #: nis/nis_print.c:184 #, c-format msgid "Diffie-Hellmann (%d bits)\n" msgstr "" #: nis/nis_print.c:189 #, c-format msgid "RSA (%d bits)\n" msgstr "RSA (%d 位)\n" #: nis/nis_print.c:192 msgid "Kerberos.\n" msgstr "" #: nis/nis_print.c:195 #, c-format msgid "Unknown (type = %d, bits = %d)\n" msgstr "未知 (类型 = %d，位 = %d)\n" #: nis/nis_print.c:206 #, c-format msgid "\tUniversal addresses (%u)\n" msgstr "" #: nis/nis_print.c:228 msgid "Time to live : " msgstr "存在的时间 ：" #: nis/nis_print.c:230 msgid "Default Access rights :\n" msgstr "默认访问权限 ：\n" #: nis/nis_print.c:239 #, c-format msgid "\tType : %s\n" msgstr "\t类型 ：%s\n" #: nis/nis_print.c:240 msgid "\tAccess rights: " msgstr "\t访问权限 ：" #: nis/nis_print.c:254 msgid "Group Flags :" msgstr "组标志 ：" #: nis/nis_print.c:257 msgid "" "\n" "Group Members :\n" msgstr "" "\n" "组成员 ：\n" #: nis/nis_print.c:269 #, c-format msgid "Table Type : %s\n" msgstr "表格类型 ：%s\n" #: nis/nis_print.c:270 #, c-format msgid "Number of Columns : %d\n" msgstr "列的数量 ：%d\n" #: nis/nis_print.c:271 #, c-format msgid "Character Separator : %c\n" msgstr "字符分隔符：%c\n" #: nis/nis_print.c:272 #, c-format msgid "Search Path : %s\n" msgstr "搜索路径 ：%s\n" #: nis/nis_print.c:273 msgid "Columns :\n" msgstr "" #: nis/nis_print.c:276 #, c-format msgid "\t[%d]\tName : %s\n" msgstr "\t[%d]\t名称 ：%s\n" #: nis/nis_print.c:278 msgid "\t\tAttributes : " msgstr "\t\t属性 ：" #: nis/nis_print.c:280 msgid "\t\tAccess Rights : " msgstr "\t\t访问权限 ：" #: nis/nis_print.c:290 msgid "Linked Object Type : " msgstr "连接到对象类型 ：" #: nis/nis_print.c:292 #, c-format msgid "Linked to : %s\n" msgstr "连接到 ：%s\n" #: nis/nis_print.c:302 #, c-format msgid "\tEntry data of type %s\n" msgstr "" #: nis/nis_print.c:305 #, c-format msgid "\t[%u] - [%u bytes] " msgstr "\t[%u] - [%u 字节] " #: nis/nis_print.c:308 msgid "Encrypted data\n" msgstr "已加密的数据\n" #: nis/nis_print.c:310 msgid "Binary data\n" msgstr "二进制数据\n" #: nis/nis_print.c:326 #, c-format msgid "Object Name : %s\n" msgstr "对象名称 ：%s\n" #: nis/nis_print.c:327 #, c-format msgid "Directory : %s\n" msgstr "目录 ：%s\n" #: nis/nis_print.c:328 #, c-format msgid "Owner : %s\n" msgstr "所有者 ：%s\n" #: nis/nis_print.c:329 #, c-format msgid "Group : %s\n" msgstr "组 ：%s\n" #: nis/nis_print.c:330 msgid "Access Rights : " msgstr "访问权限：" #: nis/nis_print.c:332 #, c-format msgid "" "\n" "Time to Live : " msgstr "" "\n" "存在的时间 ：" #: nis/nis_print.c:335 #, c-format msgid "Creation Time : %s" msgstr "创建时间：%s" #: nis/nis_print.c:337 #, c-format msgid "Mod. Time : %s" msgstr "修改时间 ：%s" #: nis/nis_print.c:338 msgid "Object Type : " msgstr "对象类型 ：%s" #: nis/nis_print.c:358 #, c-format msgid " Data Length = %u\n" msgstr " 数据长度 = %u\n" #: nis/nis_print.c:372 #, c-format msgid "Status : %s\n" msgstr "状态 ：%s\n" #: nis/nis_print.c:373 #, c-format msgid "Number of objects : %u\n" msgstr "对象的数量 ：%u\n" #: nis/nis_print.c:377 #, c-format msgid "Object #%d:\n" msgstr "对象 #%d：\n" #: nis/nis_print_group_entry.c:116 #, c-format msgid "Group entry for \"%s.%s\" group:\n" msgstr "" #: nis/nis_print_group_entry.c:124 msgid " Explicit members:\n" msgstr " 显式成员：\n" #: nis/nis_print_group_entry.c:129 msgid " No explicit members\n" msgstr " 无显式成员\n" #: nis/nis_print_group_entry.c:132 msgid " Implicit members:\n" msgstr " 隐含成员：\n" #: nis/nis_print_group_entry.c:137 msgid " No implicit members\n" msgstr " 无隐含成员\n" #: nis/nis_print_group_entry.c:140 msgid " Recursive members:\n" msgstr " 递归成员：\n" #: nis/nis_print_group_entry.c:145 msgid " No recursive members\n" msgstr " 无递归成员\n" #: nis/nis_print_group_entry.c:148 msgid " Explicit nonmembers:\n" msgstr "" #: nis/nis_print_group_entry.c:153 msgid " No explicit nonmembers\n" msgstr "" #: nis/nis_print_group_entry.c:156 msgid " Implicit nonmembers:\n" msgstr "" #: nis/nis_print_group_entry.c:161 msgid " No implicit nonmembers\n" msgstr "" #: nis/nis_print_group_entry.c:164 msgid " Recursive nonmembers:\n" msgstr " 递归非成员：\n" #: nis/nis_print_group_entry.c:169 msgid " No recursive nonmembers\n" msgstr "" #: nis/nss_nisplus/nisplus-publickey.c:100 #: nis/nss_nisplus/nisplus-publickey.c:182 #, c-format msgid "DES entry for netname %s not unique\n" msgstr "" #: nis/nss_nisplus/nisplus-publickey.c:219 #, c-format msgid "netname2user: missing group id list in `%s'" msgstr "" #: nis/nss_nisplus/nisplus-publickey.c:301 #: nis/nss_nisplus/nisplus-publickey.c:307 #: nis/nss_nisplus/nisplus-publickey.c:372 #: nis/nss_nisplus/nisplus-publickey.c:381 #, c-format msgid "netname2user: (nis+ lookup): %s\n" msgstr "" #: nis/nss_nisplus/nisplus-publickey.c:320 #, c-format msgid "netname2user: DES entry for %s in directory %s not unique" msgstr "" #: nis/nss_nisplus/nisplus-publickey.c:338 #, c-format msgid "netname2user: principal name `%s' too long" msgstr "netname2user：基本名称“%s”过长" #: nis/nss_nisplus/nisplus-publickey.c:394 #, c-format msgid "netname2user: LOCAL entry for %s in directory %s not unique" msgstr "" #: nis/nss_nisplus/nisplus-publickey.c:401 msgid "netname2user: should not have uid 0" msgstr "netname2user：uid 不应为 0" #: nis/ypclnt.c:834 msgid "Request arguments bad" msgstr "请求参数错误" #: nis/ypclnt.c:837 msgid "RPC failure on NIS operation" msgstr "" #: nis/ypclnt.c:840 msgid "Can't bind to server which serves this domain" msgstr "无法于为此域服务的服务器绑定" #: nis/ypclnt.c:843 msgid "No such map in server's domain" msgstr "" #: nis/ypclnt.c:846 msgid "No such key in map" msgstr "" #: nis/ypclnt.c:849 msgid "Internal NIS error" msgstr "内部 NIS 错误" #: nis/ypclnt.c:852 msgid "Local resource allocation failure" msgstr "本地资源分配失败" #: nis/ypclnt.c:855 msgid "No more records in map database" msgstr "" #: nis/ypclnt.c:858 msgid "Can't communicate with portmapper" msgstr "无法与 portmapper 通讯" #: nis/ypclnt.c:861 msgid "Can't communicate with ypbind" msgstr "无法与 ypbind 通讯" #: nis/ypclnt.c:864 msgid "Can't communicate with ypserv" msgstr "无法与 ypserv 通讯" #: nis/ypclnt.c:867 msgid "Local domain name not set" msgstr "未设置本地域名" #: nis/ypclnt.c:870 msgid "NIS map database is bad" msgstr "NIS 映射数据库错误" #: nis/ypclnt.c:873 msgid "NIS client/server version mismatch - can't supply service" msgstr "NIS 客户端/服务器版本不匹配 - 无法支持服务" #: nis/ypclnt.c:879 msgid "Database is busy" msgstr "数据库忙" #: nis/ypclnt.c:882 msgid "Unknown NIS error code" msgstr "未知的 NIS 错误码" #: nis/ypclnt.c:922 msgid "Internal ypbind error" msgstr "内部 ypbind 错误" #: nis/ypclnt.c:925 msgid "Domain not bound" msgstr "未绑定域" #: nis/ypclnt.c:928 msgid "System resource allocation failure" msgstr "系统资源分配失败" #: nis/ypclnt.c:931 msgid "Unknown ypbind error" msgstr "未知的 ypbind 错误" #: nis/ypclnt.c:972 msgid "yp_update: cannot convert host to netname\n" msgstr "yp_update：无法将主机名转换为网名\n" #: nis/ypclnt.c:990 msgid "yp_update: cannot get server address\n" msgstr "yp_update：无法获取服务器地址\n" #: nscd/aicache.c:83 nscd/hstcache.c:485 #, c-format msgid "Haven't found \"%s\" in hosts cache!" msgstr "无法在主机缓冲区中找到“%s”！" #: nscd/aicache.c:85 nscd/hstcache.c:487 #, c-format msgid "Reloading \"%s\" in hosts cache!" msgstr "在主机缓冲区中重新加载“%s”！" #: nscd/cache.c:151 #, c-format msgid "add new entry \"%s\" of type %s for %s to cache%s" msgstr "" #: nscd/cache.c:153 msgid " (first)" msgstr "" #: nscd/cache.c:285 nscd/connections.c:1000 #, c-format msgid "cannot stat() file `%s': %s" msgstr "无法对文件“%s”进行 stat() 操作：%s" #: nscd/cache.c:331 #, c-format msgid "pruning %s cache; time %ld" msgstr "" #: nscd/cache.c:360 #, c-format msgid "considering %s entry \"%s\", timeout %" msgstr "" #: nscd/connections.c:553 #, c-format msgid "invalid persistent database file \"%s\": %s" msgstr "" #: nscd/connections.c:561 #, fuzzy #| msgid "invalid ELF header" msgid "uninitialized header" msgstr "无效的 ELF 头" #: nscd/connections.c:566 msgid "header size does not match" msgstr "" #: nscd/connections.c:576 msgid "file size does not match" msgstr "文件大小不匹配" #: nscd/connections.c:593 msgid "verification failed" msgstr "验证失败" #: nscd/connections.c:607 #, c-format msgid "suggested size of table for database %s larger than the persistent database's table" msgstr "" #: nscd/connections.c:618 nscd/connections.c:702 #, c-format msgid "cannot create read-only descriptor for \"%s\"; no mmap" msgstr "无法为“%s”创建只读描述符；没有 mmap" #: nscd/connections.c:634 #, fuzzy, c-format #| msgid "cannot open `%s'" msgid "cannot access '%s'" msgstr "无法打开“%s”" #: nscd/connections.c:682 #, c-format msgid "database for %s corrupted or simultaneously used; remove %s manually if necessary and restart" msgstr "" #: nscd/connections.c:688 #, c-format msgid "cannot create %s; no persistent database used" msgstr "无法创建 %s; 不使用持久数据库" #: nscd/connections.c:691 #, c-format msgid "cannot create %s; no sharing possible" msgstr "无法创建 %s; 无法共享" #: nscd/connections.c:762 #, c-format msgid "cannot write to database file %s: %s" msgstr "无法写入数据库文件 %s: %s" #: nscd/connections.c:801 #, c-format msgid "cannot set socket to close on exec: %s; disabling paranoia mode" msgstr "" #: nscd/connections.c:850 #, c-format msgid "cannot open socket: %s" msgstr "无法打开套接字：%s" #: nscd/connections.c:870 nscd/connections.c:934 #, c-format msgid "cannot change socket to nonblocking mode: %s" msgstr "无法转换套接字到非堵塞模式: %s" #: nscd/connections.c:878 nscd/connections.c:944 #, c-format msgid "cannot set socket to close on exec: %s" msgstr "无法设定套接字为 exec 时关闭: %s" #: nscd/connections.c:891 #, c-format msgid "cannot enable socket to accept connections: %s" msgstr "无法启用套接字以接受连接：%s" #: nscd/connections.c:984 #, c-format msgid "register trace file %s for database %s" msgstr "" #: nscd/connections.c:1114 #, c-format msgid "provide access to FD %d, for %s" msgstr "" #: nscd/connections.c:1126 #, c-format msgid "cannot handle old request version %d; current version is %d" msgstr "无法处理旧请求版本 %d；当前版本为 %d" #: nscd/connections.c:1148 #, c-format msgid "request from %ld not handled due to missing permission" msgstr "" #: nscd/connections.c:1153 #, c-format msgid "request from '%s' [%ld] not handled due to missing permission" msgstr "" #: nscd/connections.c:1158 msgid "request not handled due to missing permission" msgstr "" #: nscd/connections.c:1196 nscd/connections.c:1249 #, c-format msgid "cannot write result: %s" msgstr "无法写入结果：“%s”" #: nscd/connections.c:1340 #, c-format msgid "error getting caller's id: %s" msgstr "" #: nscd/connections.c:1400 #, c-format msgid "cannot open /proc/self/cmdline: %s; disabling paranoia mode" msgstr "" #: nscd/connections.c:1414 #, c-format msgid "cannot read /proc/self/cmdline: %s; disabling paranoia mode" msgstr "" #: nscd/connections.c:1454 #, c-format msgid "cannot change to old UID: %s; disabling paranoia mode" msgstr "" #: nscd/connections.c:1464 #, c-format msgid "cannot change to old GID: %s; disabling paranoia mode" msgstr "" #: nscd/connections.c:1477 #, c-format msgid "cannot change to old working directory: %s; disabling paranoia mode" msgstr "" #: nscd/connections.c:1523 #, c-format msgid "re-exec failed: %s; disabling paranoia mode" msgstr "" #: nscd/connections.c:1532 #, c-format msgid "cannot change current working directory to \"/\": %s" msgstr "" #: nscd/connections.c:1725 #, c-format msgid "short read while reading request: %s" msgstr "读取请求时没有读入足够的数据：%s" #: nscd/connections.c:1758 #, c-format msgid "key length in request too long: %d" msgstr "请求中的键过长：%d" #: nscd/connections.c:1771 #, c-format msgid "short read while reading request key: %s" msgstr "读入请求键的时候没有读入足够的数据：%s" #: nscd/connections.c:1781 #, c-format msgid "handle_request: request received (Version = %d) from PID %ld" msgstr "处理请求：已从进程ID %2$ld 收到请求 (版本 = %1$d)" #: nscd/connections.c:1786 #, c-format msgid "handle_request: request received (Version = %d)" msgstr "处理请求：已收到请求 (版本 = %d)" #: nscd/connections.c:2050 nscd/connections.c:2252 #, c-format msgid "disabled inotify after read error %d" msgstr "" #: nscd/connections.c:2375 #, fuzzy #| msgid "cannot initialize archive file" msgid "could not initialize conditional variable" msgstr "无法初始化归档文件" #: nscd/connections.c:2383 msgid "could not start clean-up thread; terminating" msgstr "" #: nscd/connections.c:2397 msgid "could not start any worker thread; terminating" msgstr "" #: nscd/connections.c:2452 nscd/connections.c:2454 nscd/connections.c:2470 #: nscd/connections.c:2480 nscd/connections.c:2498 nscd/connections.c:2509 #: nscd/connections.c:2519 #, c-format msgid "Failed to run nscd as user '%s'" msgstr "" #: nscd/connections.c:2472 msgid "initial getgrouplist failed" msgstr "初始化 getgrouplist 失败" #: nscd/connections.c:2481 msgid "getgrouplist failed" msgstr "getgrouplist 失败" #: nscd/connections.c:2499 msgid "setgroups failed" msgstr "setgroups 失败" #: nscd/grpcache.c:405 nscd/hstcache.c:432 nscd/initgrcache.c:410 #: nscd/pwdcache.c:383 nscd/servicescache.c:338 #, c-format msgid "short write in %s: %s" msgstr "" #: nscd/grpcache.c:450 nscd/initgrcache.c:77 #, c-format msgid "Haven't found \"%s\" in group cache!" msgstr "无法在组缓冲区中找到“%s”！" #: nscd/grpcache.c:452 nscd/initgrcache.c:79 #, c-format msgid "Reloading \"%s\" in group cache!" msgstr "在组缓冲区中重新加载“%s”！" #: nscd/grpcache.c:531 #, c-format msgid "Invalid numeric gid \"%s\"!" msgstr "" #: nscd/mem.c:425 #, c-format msgid "freed %zu bytes in %s cache" msgstr "" #: nscd/mem.c:568 #, c-format msgid "no more memory for database '%s'" msgstr "" #: nscd/netgroupcache.c:121 #, fuzzy, c-format #| msgid "Haven't found \"%s\" in group cache!" msgid "Haven't found \"%s\" in netgroup cache!" msgstr "无法在组缓冲区中找到“%s”！" #: nscd/netgroupcache.c:123 #, fuzzy, c-format #| msgid "Reloading \"%s\" in group cache!" msgid "Reloading \"%s\" in netgroup cache!" msgstr "在组缓冲区中重新加载“%s”！" #: nscd/netgroupcache.c:495 #, fuzzy, c-format #| msgid "Haven't found \"%s\" in group cache!" msgid "Haven't found \"%s (%s,%s,%s)\" in netgroup cache!" msgstr "无法在组缓冲区中找到“%s”！" #: nscd/netgroupcache.c:498 #, fuzzy, c-format #| msgid "Reloading \"%s\" in group cache!" msgid "Reloading \"%s (%s,%s,%s)\" in netgroup cache!" msgstr "在组缓冲区中重新加载“%s”！" #: nscd/nscd.c:106 msgid "Read configuration data from NAME" msgstr "从 NAME 中读取配置数据" #: nscd/nscd.c:108 msgid "Do not fork and display messages on the current tty" msgstr "" #: nscd/nscd.c:110 msgid "Do not fork, but otherwise behave like a daemon" msgstr "" #: nscd/nscd.c:111 msgid "NUMBER" msgstr "" #: nscd/nscd.c:111 msgid "Start NUMBER threads" msgstr "启动 NUMBER 个线程" #: nscd/nscd.c:112 msgid "Shut the server down" msgstr "关闭服务器" #: nscd/nscd.c:113 #, fuzzy #| msgid "Print current configuration statistic" msgid "Print current configuration statistics" msgstr "打印当前配置统计" #: nscd/nscd.c:114 msgid "TABLE" msgstr "" #: nscd/nscd.c:115 msgid "Invalidate the specified cache" msgstr "" #: nscd/nscd.c:116 msgid "TABLE,yes" msgstr "" #: nscd/nscd.c:117 msgid "Use separate cache for each user" msgstr "为每个用户使用分离的缓冲区" #: nscd/nscd.c:122 msgid "Name Service Cache Daemon." msgstr "" #: nscd/nscd.c:155 nss/getent.c:1003 nss/makedb.c:206 #, c-format msgid "wrong number of arguments" msgstr "参数个数错误" #: nscd/nscd.c:165 #, c-format msgid "failure while reading configuration file; this is fatal" msgstr "无法读入配置文件；这是致命的" #: nscd/nscd.c:174 #, c-format msgid "already running" msgstr "已经在运行" #: nscd/nscd.c:194 #, fuzzy, c-format #| msgid "cannot create directory for output files" msgid "cannot create a pipe to talk to the child" msgstr "无法为输出文件创建目录" #: nscd/nscd.c:198 #, c-format msgid "cannot fork" msgstr "无法 fork" #: nscd/nscd.c:268 msgid "cannot change current working directory to \"/\"" msgstr "" #: nscd/nscd.c:276 msgid "Could not create log file" msgstr "无法创建日志文件" #: nscd/nscd.c:355 nscd/nscd_stat.c:192 #, c-format msgid "write incomplete" msgstr "写入不完整" #: nscd/nscd.c:366 #, c-format msgid "cannot read invalidate ACK" msgstr "无法读入 invalidate ACK" #: nscd/nscd.c:372 #, c-format msgid "invalidation failed" msgstr "无效化失败" #: nscd/nscd.c:417 nscd/nscd.c:442 nscd/nscd_stat.c:173 #, c-format msgid "Only root is allowed to use this option!" msgstr "只有根用户允许使用本选项！" #: nscd/nscd.c:437 #, fuzzy, c-format #| msgid "%s is not a known library type" msgid "'%s' is not a known database" msgstr "%s 不是已知类型的库" #: nscd/nscd.c:452 #, c-format msgid "secure services not implemented anymore" msgstr "" #: nscd/nscd.c:485 #, c-format msgid "" "Supported tables:\n" "%s\n" "\n" "For bug reporting instructions, please see:\n" "%s.\n" msgstr "" #: nscd/nscd.c:635 #, fuzzy, c-format #| msgid "lstat failed" msgid "'wait' failed\n" msgstr "lstat 操作失败" #: nscd/nscd.c:642 #, c-format msgid "child exited with status %d\n" msgstr "" #: nscd/nscd.c:647 #, fuzzy, c-format #| msgid "Interrupted by a signal" msgid "child terminated by signal %d\n" msgstr "被信号中断" #: nscd/nscd_conf.c:54 #, c-format msgid "database %s is not supported" msgstr "不支持数据库“%s”" #: nscd/nscd_conf.c:105 #, c-format msgid "Parse error: %s" msgstr "解析错误：%s" #: nscd/nscd_conf.c:191 #, c-format msgid "Must specify user name for server-user option" msgstr "" #: nscd/nscd_conf.c:198 #, c-format msgid "Must specify user name for stat-user option" msgstr "" #: nscd/nscd_conf.c:255 #, c-format msgid "Must specify value for restart-interval option" msgstr "" #: nscd/nscd_conf.c:269 #, c-format msgid "Unknown option: %s %s %s" msgstr "未知的选项：%s %s %s" #: nscd/nscd_conf.c:282 #, c-format msgid "cannot get current working directory: %s; disabling paranoia mode" msgstr "" #: nscd/nscd_conf.c:302 #, c-format msgid "maximum file size for %s database too small" msgstr "" #: nscd/nscd_stat.c:142 #, c-format msgid "cannot write statistics: %s" msgstr "无法写入统计：%s" #: nscd/nscd_stat.c:157 msgid "yes" msgstr "" #: nscd/nscd_stat.c:158 msgid "no" msgstr "" #: nscd/nscd_stat.c:169 #, c-format msgid "Only root or %s is allowed to use this option!" msgstr "只有根用户或 %s 允许使用本选项！" #: nscd/nscd_stat.c:180 #, c-format msgid "nscd not running!\n" msgstr "nscd 未运行！\n" #: nscd/nscd_stat.c:204 #, c-format msgid "cannot read statistics data" msgstr "无法读入统计数据" #: nscd/nscd_stat.c:207 #, c-format msgid "" "nscd configuration:\n" "\n" "%15d server debug level\n" msgstr "" "nscd 配置：\n" "\n" "%15d 服务器调试级别\n" #: nscd/nscd_stat.c:231 #, c-format msgid "%3ud %2uh %2um %2lus server runtime\n" msgstr "" #: nscd/nscd_stat.c:234 #, c-format msgid " %2uh %2um %2lus server runtime\n" msgstr "" #: nscd/nscd_stat.c:236 #, c-format msgid " %2um %2lus server runtime\n" msgstr "" #: nscd/nscd_stat.c:238 #, c-format msgid " %2lus server runtime\n" msgstr "" #: nscd/nscd_stat.c:240 #, c-format msgid "" "%15d current number of threads\n" "%15d maximum number of threads\n" "%15lu number of times clients had to wait\n" "%15s paranoia mode enabled\n" "%15lu restart internal\n" "%15u reload count\n" msgstr "" #: nscd/nscd_stat.c:275 #, c-format msgid "" "\n" "%s cache:\n" "\n" "%15s cache is enabled\n" "%15s cache is persistent\n" "%15s cache is shared\n" "%15zu suggested size\n" "%15zu total data pool size\n" "%15zu used data pool size\n" "%15lu seconds time to live for positive entries\n" "%15lu seconds time to live for negative entries\n" "%15 cache hits on positive entries\n" "%15 cache hits on negative entries\n" "%15 cache misses on positive entries\n" "%15 cache misses on negative entries\n" "%15lu%% cache hit rate\n" "%15zu current number of cached values\n" "%15zu maximum number of cached values\n" "%15zu maximum chain length searched\n" "%15 number of delays on rdlock\n" "%15 number of delays on wrlock\n" "%15 memory allocations failed\n" "%15s check /etc/%s for changes\n" msgstr "" #: nscd/pwdcache.c:428 #, c-format msgid "Haven't found \"%s\" in password cache!" msgstr "无法在口令缓冲区中找到“%s”！" #: nscd/pwdcache.c:430 #, c-format msgid "Reloading \"%s\" in password cache!" msgstr "在口令缓冲区中重新加载“%s”！" #: nscd/pwdcache.c:511 #, c-format msgid "Invalid numeric uid \"%s\"!" msgstr "" #: nscd/selinux.c:155 #, c-format msgid "Failed opening connection to the audit subsystem: %m" msgstr "" #: nscd/selinux.c:176 msgid "Failed to set keep-capabilities" msgstr "" #: nscd/selinux.c:177 nscd/selinux.c:240 msgid "prctl(KEEPCAPS) failed" msgstr "" #: nscd/selinux.c:191 msgid "Failed to initialize drop of capabilities" msgstr "" #: nscd/selinux.c:192 msgid "cap_init failed" msgstr "cap_init 失败" #: nscd/selinux.c:213 nscd/selinux.c:230 msgid "Failed to drop capabilities" msgstr "" #: nscd/selinux.c:214 nscd/selinux.c:231 msgid "cap_set_proc failed" msgstr "cap_set_proc 失败" #: nscd/selinux.c:239 msgid "Failed to unset keep-capabilities" msgstr "" #: nscd/selinux.c:255 msgid "Failed to determine if kernel supports SELinux" msgstr "" #: nscd/selinux.c:270 msgid "Failed to start AVC thread" msgstr "" #: nscd/selinux.c:292 msgid "Failed to create AVC lock" msgstr "无法创建 AVC 锁" #: nscd/selinux.c:332 msgid "Failed to start AVC" msgstr "无法启动 AVC" #: nscd/selinux.c:334 msgid "Access Vector Cache (AVC) started" msgstr "" #: nscd/selinux.c:369 msgid "Error querying policy for undefined object classes or permissions." msgstr "" #: nscd/selinux.c:376 #, fuzzy #| msgid "Error getting sid from context" msgid "Error getting security class for nscd." msgstr "无法从上下文中获取 sid" #: nscd/selinux.c:381 #, c-format msgid "Error translating permission name \"%s\" to access vector bit." msgstr "" #: nscd/selinux.c:391 msgid "Error getting context of socket peer" msgstr "" #: nscd/selinux.c:396 msgid "Error getting context of nscd" msgstr "" #: nscd/selinux.c:402 msgid "Error getting sid from context" msgstr "无法从上下文中获取 sid" #: nscd/selinux.c:440 #, c-format msgid "" "\n" "SELinux AVC Statistics:\n" "\n" "%15u entry lookups\n" "%15u entry hits\n" "%15u entry misses\n" "%15u entry discards\n" "%15u CAV lookups\n" "%15u CAV hits\n" "%15u CAV probes\n" "%15u CAV misses\n" msgstr "" #: nscd/servicescache.c:387 #, c-format msgid "Haven't found \"%s\" in services cache!" msgstr "无法在服务缓冲区中找到“%s”！" #: nscd/servicescache.c:389 #, c-format msgid "Reloading \"%s\" in services cache!" msgstr "在服务缓冲区中重新加载“%s”！" #: nss/getent.c:53 msgid "database [key ...]" msgstr "数据库 [键 ...]" #: nss/getent.c:58 #, fuzzy #| msgid "CONF" msgid "CONFIG" msgstr "CONF" #: nss/getent.c:58 msgid "Service configuration to be used" msgstr "要使用的服务配置" #: nss/getent.c:59 msgid "disable IDN encoding" msgstr "" #: nss/getent.c:64 #, fuzzy #| msgid "getent - get entries from administrative database." msgid "Get entries from administrative database." msgstr "getent - 重管理数据库获取条目。" #: nss/getent.c:148 nss/getent.c:477 nss/getent.c:522 #, c-format msgid "Enumeration not supported on %s\n" msgstr "%s 不支持枚举\n" #: nss/getent.c:917 #, c-format msgid "Unknown database name" msgstr "未知的数据库名" #: nss/getent.c:947 msgid "Supported databases:\n" msgstr "支持的数据库：\n" #: nss/getent.c:1013 #, c-format msgid "Unknown database: %s\n" msgstr "未知的数据库：%s\n" #: nss/makedb.c:119 msgid "Convert key to lower case" msgstr "" #: nss/makedb.c:122 msgid "Do not print messages while building database" msgstr "" #: nss/makedb.c:124 msgid "Print content of database file, one entry a line" msgstr "" #: nss/makedb.c:125 msgid "CHAR" msgstr "" #: nss/makedb.c:126 msgid "Generated line not part of iteration" msgstr "" #: nss/makedb.c:131 msgid "Create simple database from textual input." msgstr "" #: nss/makedb.c:134 msgid "" "INPUT-FILE OUTPUT-FILE\n" "-o OUTPUT-FILE INPUT-FILE\n" "-u INPUT-FILE" msgstr "" "输入文件 输出文件\n" "-o 输出文件 输入文件\n" "-u 输入文件" #: nss/makedb.c:227 #, fuzzy, c-format #| msgid "cannot open database file `%s': %s" msgid "cannot open database file `%s'" msgstr "无法打开数据库文件“%s”: %s" #: nss/makedb.c:272 #, c-format msgid "no entries to be processed" msgstr "" #: nss/makedb.c:282 #, fuzzy, c-format #| msgid "cannot create temporary file" msgid "cannot create temporary file name" msgstr "无法创建临时文件" #: nss/makedb.c:288 #, c-format msgid "cannot create temporary file" msgstr "无法创建临时文件" #: nss/makedb.c:304 #, fuzzy, c-format #| msgid "cannot map locale archive file" msgid "cannot stat newly created file" msgstr "无法映射区域归档文件" #: nss/makedb.c:315 #, fuzzy, c-format #| msgid "cannot create temporary file" msgid "cannot rename temporary file" msgstr "无法创建临时文件" #: nss/makedb.c:531 nss/makedb.c:554 #, fuzzy, c-format #| msgid "cannot create searchlist" msgid "cannot create search tree" msgstr "无法创建搜索列表" #: nss/makedb.c:560 msgid "duplicate key" msgstr "" #: nss/makedb.c:572 #, c-format msgid "problems while reading `%s'" msgstr "读取“%s”时出错" #: nss/makedb.c:799 #, fuzzy, c-format #| msgid "while writing database file" msgid "failed to write new database file" msgstr "当写数据库文件" #: nss/makedb.c:812 #, fuzzy, c-format #| msgid "cannot write to database file %s: %s" msgid "cannot stat database file" msgstr "无法写入数据库文件 %s: %s" #: nss/makedb.c:817 #, fuzzy, c-format #| msgid "cannot open database file `%s': %s" msgid "cannot map database file" msgstr "无法打开数据库文件“%s”: %s" #: nss/makedb.c:820 #, fuzzy, c-format #| msgid "while writing database file" msgid "file not a database file" msgstr "当写数据库文件" #: nss/makedb.c:871 #, fuzzy, c-format #| msgid "cannot open output file `%s' for category `%s'" msgid "cannot set file creation context for `%s'" msgstr "无法为范畴“%2$s”打开输出文件“%1$s”" #: posix/getconf.c:400 #, c-format msgid "Usage: %s [-v specification] variable_name [pathname]\n" msgstr "用法：%s [-v 规范] 变量名 [路径名]\n" #: posix/getconf.c:403 #, c-format msgid " %s -a [pathname]\n" msgstr "" #: posix/getconf.c:479 #, c-format msgid "" "Usage: getconf [-v SPEC] VAR\n" " or: getconf [-v SPEC] PATH_VAR PATH\n" "\n" "Get the configuration value for variable VAR, or for variable PATH_VAR\n" "for path PATH. If SPEC is given, give values for compilation\n" "environment SPEC.\n" "\n" msgstr "" #: posix/getconf.c:537 #, c-format msgid "unknown specification \"%s\"" msgstr "未知的规范“%s”" #: posix/getconf.c:589 #, c-format msgid "Couldn't execute %s" msgstr "" #: posix/getconf.c:633 posix/getconf.c:649 msgid "undefined" msgstr "未定义" #: posix/getconf.c:671 #, c-format msgid "Unrecognized variable `%s'" msgstr "不可识别的变量“%s”" #: posix/getopt.c:592 posix/getopt.c:621 #, fuzzy, c-format #| msgid "%s: option `%s' is ambiguous\n" msgid "%s: option '%s' is ambiguous; possibilities:" msgstr "%s：选项“%s”具有二义性\n" #: posix/getopt.c:662 posix/getopt.c:666 #, fuzzy, c-format #| msgid "%s: option `--%s' doesn't allow an argument\n" msgid "%s: option '--%s' doesn't allow an argument\n" msgstr "%s：选项“--%s”不接受任何参数\n" #: posix/getopt.c:675 posix/getopt.c:680 #, fuzzy, c-format #| msgid "%s: option `%c%s' doesn't allow an argument\n" msgid "%s: option '%c%s' doesn't allow an argument\n" msgstr "%s：选项“%c%s”不接受参数\n" #: posix/getopt.c:723 posix/getopt.c:742 #, fuzzy, c-format #| msgid "%s: option `%s' requires an argument\n" msgid "%s: option '--%s' requires an argument\n" msgstr "%s：选项“%s”需要一个参数\n" #: posix/getopt.c:780 posix/getopt.c:783 #, fuzzy, c-format #| msgid "%s: unrecognized option `--%s'\n" msgid "%s: unrecognized option '--%s'\n" msgstr "%s：无法识别的选项“--%s”\n" #: posix/getopt.c:791 posix/getopt.c:794 #, fuzzy, c-format #| msgid "%s: unrecognized option `%c%s'\n" msgid "%s: unrecognized option '%c%s'\n" msgstr "%s：无法识别的选项“%c%s”\n" #: posix/getopt.c:843 posix/getopt.c:846 #, fuzzy, c-format #| msgid "%s: invalid option -- %c\n" msgid "%s: invalid option -- '%c'\n" msgstr "%s：无效选项 -- %c\n" #: posix/getopt.c:899 posix/getopt.c:916 posix/getopt.c:1126 #: posix/getopt.c:1144 #, fuzzy, c-format #| msgid "%s: option requires an argument -- %c\n" msgid "%s: option requires an argument -- '%c'\n" msgstr "%s：选项需要一个参数 -- %c\n" #: posix/getopt.c:972 posix/getopt.c:988 #, fuzzy, c-format #| msgid "%s: option `-W %s' is ambiguous\n" msgid "%s: option '-W %s' is ambiguous\n" msgstr "%s：选项“-W %s”具有二义性\n" #: posix/getopt.c:1012 posix/getopt.c:1030 #, fuzzy, c-format #| msgid "%s: option `-W %s' doesn't allow an argument\n" msgid "%s: option '-W %s' doesn't allow an argument\n" msgstr "%s：选项“-W %s”不接受参数\n" #: posix/getopt.c:1051 posix/getopt.c:1069 #, fuzzy, c-format #| msgid "%s: option `%s' requires an argument\n" msgid "%s: option '-W %s' requires an argument\n" msgstr "%s：选项“%s”需要一个参数\n" #: posix/regcomp.c:140 msgid "No match" msgstr "没有匹配" #: posix/regcomp.c:143 msgid "Invalid regular expression" msgstr "无效的常规表达式" #: posix/regcomp.c:146 msgid "Invalid collation character" msgstr "" #: posix/regcomp.c:149 msgid "Invalid character class name" msgstr "无效的字符类名" #: posix/regcomp.c:152 msgid "Trailing backslash" msgstr "" #: posix/regcomp.c:155 msgid "Invalid back reference" msgstr "无效的向后引用" #: posix/regcomp.c:158 msgid "Unmatched [ or [^" msgstr " 不匹配的 [ 或 [^" #: posix/regcomp.c:161 msgid "Unmatched ( or \\(" msgstr "不匹配的 ( 或 \\(" #: posix/regcomp.c:164 msgid "Unmatched \\{" msgstr "不匹配的 \\{" #: posix/regcomp.c:167 msgid "Invalid content of \\{\\}" msgstr "无效的 \\{\\} 的内容" #: posix/regcomp.c:170 msgid "Invalid range end" msgstr "" #: posix/regcomp.c:173 msgid "Memory exhausted" msgstr "内存耗尽" #: posix/regcomp.c:176 msgid "Invalid preceding regular expression" msgstr "无效的前导常规表达式" #: posix/regcomp.c:179 msgid "Premature end of regular expression" msgstr "常规表达式非正常结束" #: posix/regcomp.c:182 msgid "Regular expression too big" msgstr "常规表达式过大" #: posix/regcomp.c:185 msgid "Unmatched ) or \\)" msgstr "不匹配的 ) 或 \\)" #: posix/regcomp.c:685 msgid "No previous regular expression" msgstr "没有前一个常规表达式" #: posix/wordexp.c:1844 msgid "parameter null or not set" msgstr "参数为 null 或未设置" #: resolv/herror.c:68 msgid "Resolver Error 0 (no error)" msgstr "解析器错误 0 (无错误)" #: resolv/herror.c:69 msgid "Unknown host" msgstr "未知的主机" #: resolv/herror.c:70 msgid "Host name lookup failure" msgstr "主机名搜索失败" #: resolv/herror.c:71 msgid "Unknown server error" msgstr "未知的服务器错误" #: resolv/herror.c:72 msgid "No address associated with name" msgstr "没有与名字关联的地址" #: resolv/herror.c:107 msgid "Resolver internal error" msgstr "解析器内部错误" #: resolv/herror.c:110 msgid "Unknown resolver error" msgstr "未知的解析器错误" #: resolv/res_hconf.c:125 #, c-format msgid "%s: line %d: cannot specify more than %d trim domains" msgstr "%s：行 %d：无法指定多于 %d 个规整域" #: resolv/res_hconf.c:146 #, c-format msgid "%s: line %d: list delimiter not followed by domain" msgstr "%s：行 %d：列表分隔符没有出现在域之后" #: resolv/res_hconf.c:205 #, c-format msgid "%s: line %d: expected `on' or `off', found `%s'\n" msgstr "%s：行 %d：应为“on”或“off”，得到“%s”\n" #: resolv/res_hconf.c:248 #, c-format msgid "%s: line %d: bad command `%s'\n" msgstr "%s：行 %d：错误命令“%s”\n" #: resolv/res_hconf.c:283 #, c-format msgid "%s: line %d: ignoring trailing garbage `%s'\n" msgstr "" #: stdio-common/psiginfo-data.h:2 #, fuzzy #| msgid "Illegal seek" msgid "Illegal opcode" msgstr "非法 seek 操作" #: stdio-common/psiginfo-data.h:3 #, fuzzy #| msgid "Illegal seek" msgid "Illegal operand" msgstr "非法 seek 操作" #: stdio-common/psiginfo-data.h:4 msgid "Illegal addressing mode" msgstr "" #: stdio-common/psiginfo-data.h:5 #, fuzzy #| msgid "Illegal seek" msgid "Illegal trap" msgstr "非法 seek 操作" #: stdio-common/psiginfo-data.h:6 msgid "Privileged opcode" msgstr "" #: stdio-common/psiginfo-data.h:7 msgid "Privileged register" msgstr "" #: stdio-common/psiginfo-data.h:8 #, fuzzy #| msgid "preprocessor error" msgid "Coprocessor error" msgstr "预处理错误" #: stdio-common/psiginfo-data.h:9 #, fuzzy #| msgid "Internal NIS error" msgid "Internal stack error" msgstr "内部 NIS 错误" #: stdio-common/psiginfo-data.h:12 msgid "Integer divide by zero" msgstr "" #: stdio-common/psiginfo-data.h:13 #, fuzzy #| msgid "time overflow" msgid "Integer overflow" msgstr "时间溢出" #: stdio-common/psiginfo-data.h:14 #, fuzzy #| msgid "Floating point exception" msgid "Floating-point divide by zero" msgstr "浮点数例外" #: stdio-common/psiginfo-data.h:15 #, fuzzy #| msgid "Floating point exception" msgid "Floating-point overflow" msgstr "浮点数例外" #: stdio-common/psiginfo-data.h:16 #, fuzzy #| msgid "Floating point exception" msgid "Floating-point underflow" msgstr "浮点数例外" #: stdio-common/psiginfo-data.h:17 #, fuzzy #| msgid "Floating point exception" msgid "Floating-poing inexact result" msgstr "浮点数例外" #: stdio-common/psiginfo-data.h:18 #, fuzzy #| msgid "Invalid object for operation" msgid "Invalid floating-point operation" msgstr "操作无效的对象" #: stdio-common/psiginfo-data.h:19 #, fuzzy #| msgid "Link number out of range" msgid "Subscript out of range" msgstr "连接数超出范围" #: stdio-common/psiginfo-data.h:22 msgid "Address not mapped to object" msgstr "" #: stdio-common/psiginfo-data.h:23 msgid "Invalid permissions for mapped object" msgstr "" #: stdio-common/psiginfo-data.h:26 #, fuzzy #| msgid "Invalid argument" msgid "Invalid address alignment" msgstr "无效的参数" #: stdio-common/psiginfo-data.h:27 msgid "Nonexisting physical address" msgstr "" #: stdio-common/psiginfo-data.h:28 msgid "Object-specific hardware error" msgstr "" #: stdio-common/psiginfo-data.h:31 msgid "Process breakpoint" msgstr "" #: stdio-common/psiginfo-data.h:32 msgid "Process trace trap" msgstr "" #: stdio-common/psiginfo-data.h:35 #, fuzzy #| msgid "Child exited" msgid "Child has exited" msgstr "子进程已退出" #: stdio-common/psiginfo-data.h:36 msgid "Child has terminated abnormally and did not create a core file" msgstr "" #: stdio-common/psiginfo-data.h:37 msgid "Child has terminated abnormally and created a core file" msgstr "" #: stdio-common/psiginfo-data.h:38 msgid "Traced child has trapped" msgstr "" #: stdio-common/psiginfo-data.h:39 #, fuzzy #| msgid "Child exited" msgid "Child has stopped" msgstr "子进程已退出" #: stdio-common/psiginfo-data.h:40 msgid "Stopped child has continued" msgstr "" #: stdio-common/psiginfo-data.h:43 #, fuzzy #| msgid "No data available" msgid "Data input available" msgstr "没有可用的数据" #: stdio-common/psiginfo-data.h:44 #, fuzzy #| msgid "No buffer space available" msgid "Output buffers available" msgstr "没有可用的缓冲区空间" #: stdio-common/psiginfo-data.h:45 #, fuzzy #| msgid "No buffer space available" msgid "Input message available" msgstr "没有可用的缓冲区空间" #: stdio-common/psiginfo-data.h:46 msgid "I/O error" msgstr "I/O 错误" #: stdio-common/psiginfo-data.h:47 #, fuzzy #| msgid "RPC program not available" msgid "High priority input available" msgstr "RPC 程序不可用" #: stdio-common/psiginfo-data.h:48 msgid "Device disconnected" msgstr "" #: stdio-common/psiginfo.c:139 msgid "Signal sent by kill()" msgstr "" #: stdio-common/psiginfo.c:142 msgid "Signal sent by sigqueue()" msgstr "" #: stdio-common/psiginfo.c:145 msgid "Signal generated by the expiration of a timer" msgstr "" #: stdio-common/psiginfo.c:148 msgid "Signal generated by the completion of an asynchronous I/O request" msgstr "" #: stdio-common/psiginfo.c:152 msgid "Signal generated by the arrival of a message on an empty message queue" msgstr "" #: stdio-common/psiginfo.c:157 msgid "Signal sent by tkill()" msgstr "" #: stdio-common/psiginfo.c:162 msgid "Signal generated by the completion of an asynchronous name lookup request" msgstr "" #: stdio-common/psiginfo.c:168 msgid "Signal generated by the completion of an I/O request" msgstr "" #: stdio-common/psiginfo.c:174 msgid "Signal sent by the kernel" msgstr "" #: stdio-common/psiginfo.c:198 #, fuzzy, c-format #| msgid "Unknown signal %d" msgid "Unknown signal %d\n" msgstr "未知信号 %d" #: stdio-common/psignal.c:43 #, c-format msgid "%s%sUnknown signal %d\n" msgstr "%s%s未知的信号 %d\n" #: stdio-common/psignal.c:44 msgid "Unknown signal" msgstr "未知信号" #: string/_strerror.c:45 sysdeps/mach/_strerror.c:86 msgid "Unknown error " msgstr "未知的错误 " #: string/strerror.c:42 msgid "Unknown error" msgstr "未知的错误" #: string/strsignal.c:60 #, c-format msgid "Real-time signal %d" msgstr "实时信号 %d" #: string/strsignal.c:64 #, c-format msgid "Unknown signal %d" msgstr "未知信号 %d" #: sunrpc/auth_unix.c:111 sunrpc/clnt_tcp.c:123 sunrpc/clnt_udp.c:135 #: sunrpc/clnt_unix.c:124 sunrpc/svc_tcp.c:188 sunrpc/svc_tcp.c:233 #: sunrpc/svc_udp.c:162 sunrpc/svc_unix.c:188 sunrpc/svc_unix.c:229 #: sunrpc/xdr.c:631 sunrpc/xdr.c:793 sunrpc/xdr_array.c:97 #: sunrpc/xdr_rec.c:152 sunrpc/xdr_ref.c:76 #, fuzzy #| msgid "out of memory" msgid "out of memory\n" msgstr "内存不足" #: sunrpc/auth_unix.c:349 msgid "auth_unix.c: Fatal marshalling problem" msgstr "" #: sunrpc/clnt_perr.c:95 sunrpc/clnt_perr.c:111 #, c-format msgid "%s: %s; low version = %lu, high version = %lu" msgstr "" #: sunrpc/clnt_perr.c:102 #, c-format msgid "%s: %s; why = %s\n" msgstr "" #: sunrpc/clnt_perr.c:104 #, fuzzy, c-format #| msgid "(unknown authentication error - %d)" msgid "%s: %s; why = (unknown authentication error - %d)\n" msgstr "(未知的认证错误 - %d)" #: sunrpc/clnt_perr.c:153 msgid "RPC: Success" msgstr "RPC：成功" #: sunrpc/clnt_perr.c:156 msgid "RPC: Can't encode arguments" msgstr "RPC：无法对参数进行编码" #: sunrpc/clnt_perr.c:160 msgid "RPC: Can't decode result" msgstr "RPC：无法对结果进行解码" #: sunrpc/clnt_perr.c:164 msgid "RPC: Unable to send" msgstr "RPC：无法发送" #: sunrpc/clnt_perr.c:168 msgid "RPC: Unable to receive" msgstr "RPC：无法接收" #: sunrpc/clnt_perr.c:172 msgid "RPC: Timed out" msgstr "RPC：超时" #: sunrpc/clnt_perr.c:176 msgid "RPC: Incompatible versions of RPC" msgstr "RPC：RPC 版本不兼容" #: sunrpc/clnt_perr.c:180 msgid "RPC: Authentication error" msgstr "RPC：认证错误" #: sunrpc/clnt_perr.c:184 msgid "RPC: Program unavailable" msgstr "RPC：程序不可用" #: sunrpc/clnt_perr.c:188 msgid "RPC: Program/version mismatch" msgstr "RPC：程序/版本不匹配" #: sunrpc/clnt_perr.c:192 msgid "RPC: Procedure unavailable" msgstr "" #: sunrpc/clnt_perr.c:196 msgid "RPC: Server can't decode arguments" msgstr "RPC：服务器无法对参数进行解码" #: sunrpc/clnt_perr.c:200 msgid "RPC: Remote system error" msgstr "RPC：远程系统错误" #: sunrpc/clnt_perr.c:204 msgid "RPC: Unknown host" msgstr "RPC：未知主机" #: sunrpc/clnt_perr.c:208 msgid "RPC: Unknown protocol" msgstr "RPC：未知协议" #: sunrpc/clnt_perr.c:212 msgid "RPC: Port mapper failure" msgstr "" #: sunrpc/clnt_perr.c:216 msgid "RPC: Program not registered" msgstr "RPC：程序未注册" #: sunrpc/clnt_perr.c:220 msgid "RPC: Failed (unspecified error)" msgstr "RPC：失败 (未指明的错误)" #: sunrpc/clnt_perr.c:261 msgid "RPC: (unknown error code)" msgstr "RPC：(未知的错误码)" #: sunrpc/clnt_perr.c:333 msgid "Authentication OK" msgstr "认证成功" #: sunrpc/clnt_perr.c:336 msgid "Invalid client credential" msgstr "无效的客户证书" #: sunrpc/clnt_perr.c:340 msgid "Server rejected credential" msgstr "服务器拒绝证书" #: sunrpc/clnt_perr.c:344 msgid "Invalid client verifier" msgstr "无效的客户校验" #: sunrpc/clnt_perr.c:348 msgid "Server rejected verifier" msgstr "服务器拒绝校验" #: sunrpc/clnt_perr.c:352 msgid "Client credential too weak" msgstr "客户证书太弱" #: sunrpc/clnt_perr.c:356 msgid "Invalid server verifier" msgstr "无效的服务器校验" #: sunrpc/clnt_perr.c:360 msgid "Failed (unspecified error)" msgstr "失败 (未指明的错误)" #: sunrpc/clnt_raw.c:115 msgid "clnt_raw.c: fatal header serialization error" msgstr "clnt_raw.c: 致命的头编序错误。" #: sunrpc/pm_getmaps.c:77 msgid "pmap_getmaps.c: rpc problem" msgstr "" #: sunrpc/pmap_clnt.c:127 msgid "Cannot register service" msgstr "无法注册服务" #: sunrpc/pmap_rmt.c:243 msgid "Cannot create socket for broadcast rpc" msgstr "无法为广播 rpc 创建套接字" #: sunrpc/pmap_rmt.c:250 msgid "Cannot set socket option SO_BROADCAST" msgstr "无法设置套接字选项 SO_BROADCAST" #: sunrpc/pmap_rmt.c:302 msgid "Cannot send broadcast packet" msgstr "无法发送广播包" #: sunrpc/pmap_rmt.c:327 msgid "Broadcast poll problem" msgstr "" #: sunrpc/pmap_rmt.c:340 msgid "Cannot receive reply to broadcast" msgstr "无法接收对广播的应答" #: sunrpc/rpc_main.c:281 #, c-format msgid "%s: output would overwrite %s\n" msgstr "%s：输出将覆盖 %s\n" #: sunrpc/rpc_main.c:288 #, c-format msgid "%s: unable to open %s: %m\n" msgstr "%s：无法打开 %s：%m\n" #: sunrpc/rpc_main.c:300 #, c-format msgid "%s: while writing output %s: %m" msgstr "%s：写入输出 %s 时：%m" #: sunrpc/rpc_main.c:336 sunrpc/rpc_main.c:375 #, fuzzy, c-format #| msgid "cannot find C preprocessor: %s \n" msgid "cannot find C preprocessor: %s\n" msgstr "无法找到 C 预处理器：%s\n" #: sunrpc/rpc_main.c:411 #, c-format msgid "%s: C preprocessor failed with signal %d\n" msgstr "%s：C 预处理器因信号 %d 而失败\n" #: sunrpc/rpc_main.c:414 #, c-format msgid "%s: C preprocessor failed with exit code %d\n" msgstr "%s：C 预处理器失败，返回 %d\n" #: sunrpc/rpc_main.c:454 #, c-format msgid "illegal nettype: `%s'\n" msgstr "非法网络类型：“%s”\n" #: sunrpc/rpc_main.c:1089 #, c-format msgid "rpcgen: too many defines\n" msgstr "rpcgen：定义过多\n" #: sunrpc/rpc_main.c:1101 #, c-format msgid "rpcgen: arglist coding error\n" msgstr "" #. TRANS: the file will not be removed; this is an #. TRANS: informative message. #: sunrpc/rpc_main.c:1134 #, c-format msgid "file `%s' already exists and may be overwritten\n" msgstr "文件“%s”已存在并可能被覆盖\n" #: sunrpc/rpc_main.c:1179 #, c-format msgid "Cannot specify more than one input file!\n" msgstr "无法指定多个输入文件！\n" #: sunrpc/rpc_main.c:1349 #, c-format msgid "This implementation doesn't support newstyle or MT-safe code!\n" msgstr "" #: sunrpc/rpc_main.c:1358 #, c-format msgid "Cannot use netid flag with inetd flag!\n" msgstr "无法在使用 inetd 标志的同时使用 netid 标志！\n" #: sunrpc/rpc_main.c:1367 #, c-format msgid "Cannot use netid flag without TIRPC!\n" msgstr "无法在未使用 TIRPC 的时候使用 netid 标志！\n" #: sunrpc/rpc_main.c:1374 #, c-format msgid "Cannot use table flags with newstyle!\n" msgstr "无法以新风格使用表格标志！\n" #: sunrpc/rpc_main.c:1393 #, c-format msgid "\"infile\" is required for template generation flags.\n" msgstr "“输入文件”对模板生成标志来说是必须的。\n" #: sunrpc/rpc_main.c:1398 #, c-format msgid "Cannot have more than one file generation flag!\n" msgstr "无法使用多于一个的文件生成标志！\n" #: sunrpc/rpc_main.c:1407 #, c-format msgid "usage: %s infile\n" msgstr "用法：%s 输入文件\n" #: sunrpc/rpc_main.c:1408 #, c-format msgid "\t%s [-abkCLNTM][-Dname[=value]] [-i size] [-I [-K seconds]] [-Y path] infile\n" msgstr "\t%s [-abkCLNTM][-D名字[=值]] [-i 大小] [-I [-K 秒数]] [-Y 路径] 输入文件\n" #: sunrpc/rpc_main.c:1410 #, c-format msgid "\t%s [-c | -h | -l | -m | -t | -Sc | -Ss | -Sm] [-o outfile] [infile]\n" msgstr "\t%s [-c | -h | -l | -m | -t | -Sc | -Ss | -Sm] [-o 输出文件] [输入文件]\n" #: sunrpc/rpc_main.c:1412 #, c-format msgid "\t%s [-s nettype]* [-o outfile] [infile]\n" msgstr "\t%s [-s 网络类型]* [-o 输出文件] [输入文件]\n" #: sunrpc/rpc_main.c:1413 #, c-format msgid "\t%s [-n netid]* [-o outfile] [infile]\n" msgstr "\t%s [-n 网络 id]* [-o 输出文件] [输入文件]\n" #: sunrpc/rpc_main.c:1421 #, c-format msgid "options:\n" msgstr "" #: sunrpc/rpc_main.c:1422 #, c-format msgid "-a\t\tgenerate all files, including samples\n" msgstr "" #: sunrpc/rpc_main.c:1423 #, c-format msgid "-b\t\tbackward compatibility mode (generates code for SunOS 4.1)\n" msgstr "" #: sunrpc/rpc_main.c:1424 #, c-format msgid "-c\t\tgenerate XDR routines\n" msgstr "" #: sunrpc/rpc_main.c:1425 #, c-format msgid "-C\t\tANSI C mode\n" msgstr "" #: sunrpc/rpc_main.c:1426 #, c-format msgid "-Dname[=value]\tdefine a symbol (same as #define)\n" msgstr "" #: sunrpc/rpc_main.c:1427 #, c-format msgid "-h\t\tgenerate header file\n" msgstr "" #: sunrpc/rpc_main.c:1428 #, c-format msgid "-i size\t\tsize at which to start generating inline code\n" msgstr "" #: sunrpc/rpc_main.c:1429 #, c-format msgid "-I\t\tgenerate code for inetd support in server (for SunOS 4.1)\n" msgstr "" #: sunrpc/rpc_main.c:1430 #, c-format msgid "-K seconds\tserver exits after K seconds of inactivity\n" msgstr "" #: sunrpc/rpc_main.c:1431 #, c-format msgid "-l\t\tgenerate client side stubs\n" msgstr "" #: sunrpc/rpc_main.c:1432 #, c-format msgid "-L\t\tserver errors will be printed to syslog\n" msgstr "" #: sunrpc/rpc_main.c:1433 #, c-format msgid "-m\t\tgenerate server side stubs\n" msgstr "" #: sunrpc/rpc_main.c:1434 #, c-format msgid "-M\t\tgenerate MT-safe code\n" msgstr "" #: sunrpc/rpc_main.c:1435 #, c-format msgid "-n netid\tgenerate server code that supports named netid\n" msgstr "" #: sunrpc/rpc_main.c:1436 #, c-format msgid "-N\t\tsupports multiple arguments and call-by-value\n" msgstr "" #: sunrpc/rpc_main.c:1437 #, fuzzy, c-format #| msgid "cannot generate output file" msgid "-o outfile\tname of the output file\n" msgstr "无法生成输出文件" #: sunrpc/rpc_main.c:1438 #, c-format msgid "-s nettype\tgenerate server code that supports named nettype\n" msgstr "" #: sunrpc/rpc_main.c:1439 #, c-format msgid "-Sc\t\tgenerate sample client code that uses remote procedures\n" msgstr "" #: sunrpc/rpc_main.c:1440 #, c-format msgid "-Ss\t\tgenerate sample server code that defines remote procedures\n" msgstr "" #: sunrpc/rpc_main.c:1441 #, c-format msgid "-Sm \t\tgenerate makefile template \n" msgstr "" #: sunrpc/rpc_main.c:1442 #, c-format msgid "-t\t\tgenerate RPC dispatch table\n" msgstr "" #: sunrpc/rpc_main.c:1443 #, c-format msgid "-T\t\tgenerate code to support RPC dispatch tables\n" msgstr "" #: sunrpc/rpc_main.c:1444 #, fuzzy, c-format #| msgid "cannot find any C preprocessor (cpp)\n" msgid "-Y path\t\tdirectory name to find C preprocessor (cpp)\n" msgstr "无法找到任何 C 预处理器 (cpp)\n" #: sunrpc/rpc_main.c:1445 #, c-format msgid "-5\t\tSysVr4 compatibility mode\n" msgstr "" #: sunrpc/rpc_main.c:1446 #, fuzzy, c-format #| msgid "Give this help list" msgid "--help\t\tgive this help list\n" msgstr "给出该系统求助列表" #: sunrpc/rpc_main.c:1447 #, fuzzy, c-format #| msgid "Print program version" msgid "--version\tprint program version\n" msgstr "打印程序版本号" #: sunrpc/rpc_main.c:1449 #, c-format msgid "" "\n" "For bug reporting instructions, please see:\n" "%s.\n" msgstr "" #: sunrpc/rpc_scan.c:112 msgid "constant or identifier expected" msgstr "应为常量或标识符" #: sunrpc/rpc_scan.c:308 msgid "illegal character in file: " msgstr "文件中的非法字符：" #: sunrpc/rpc_scan.c:347 sunrpc/rpc_scan.c:373 msgid "unterminated string constant" msgstr "未终止的字符串常量" #: sunrpc/rpc_scan.c:379 msgid "empty char string" msgstr "" #: sunrpc/rpc_scan.c:521 sunrpc/rpc_scan.c:531 msgid "preprocessor error" msgstr "预处理错误" #: sunrpc/rpcinfo.c:246 sunrpc/rpcinfo.c:392 #, c-format msgid "program %lu is not available\n" msgstr "程序 %lu 不可用\n" #: sunrpc/rpcinfo.c:273 sunrpc/rpcinfo.c:319 sunrpc/rpcinfo.c:342 #: sunrpc/rpcinfo.c:416 sunrpc/rpcinfo.c:462 sunrpc/rpcinfo.c:485 #: sunrpc/rpcinfo.c:519 #, c-format msgid "program %lu version %lu is not available\n" msgstr "程序 %lu 版本 %lu 不可用\n" #: sunrpc/rpcinfo.c:524 #, c-format msgid "program %lu version %lu ready and waiting\n" msgstr "程序 %lu 版本 %lu 就绪并等待\n" #: sunrpc/rpcinfo.c:565 sunrpc/rpcinfo.c:572 msgid "rpcinfo: can't contact portmapper" msgstr "rpcinfo：无法同 portmapper 交互" #: sunrpc/rpcinfo.c:579 msgid "No remote programs registered.\n" msgstr "没有注册的远程程序。\n" #: sunrpc/rpcinfo.c:583 msgid " program vers proto port\n" msgstr " 程序 版本 协议 端口\n" #: sunrpc/rpcinfo.c:622 msgid "(unknown)" msgstr "(未知)" #: sunrpc/rpcinfo.c:646 #, c-format msgid "rpcinfo: broadcast failed: %s\n" msgstr "rpcinfo：广播失败：%s\n" #: sunrpc/rpcinfo.c:667 msgid "Sorry. You are not root\n" msgstr "抱歉。您不是根用户\n" #: sunrpc/rpcinfo.c:674 #, c-format msgid "rpcinfo: Could not delete registration for prog %s version %s\n" msgstr "rpcinfo：无法删除程序 %s 版本 %s 的注册\n" #: sunrpc/rpcinfo.c:683 msgid "Usage: rpcinfo [ -n portnum ] -u host prognum [ versnum ]\n" msgstr "用法：rpcinfo [ -n 端口号 ] -u 主机名 程序号 [ 版本号 ]\n" #: sunrpc/rpcinfo.c:685 msgid " rpcinfo [ -n portnum ] -t host prognum [ versnum ]\n" msgstr " rpcinfo [ -n 端口号 ] -t 主机 程序号 [ 版本号 ]\n" #: sunrpc/rpcinfo.c:687 msgid " rpcinfo -p [ host ]\n" msgstr " rpcinfo -p [ 主机 ]\n" #: sunrpc/rpcinfo.c:688 msgid " rpcinfo -b prognum versnum\n" msgstr " rpcinfo -b 程序号 版本号\n" #: sunrpc/rpcinfo.c:689 msgid " rpcinfo -d prognum versnum\n" msgstr " rpcinfo -d 程序号 版本号\n" #: sunrpc/rpcinfo.c:714 #, c-format msgid "rpcinfo: %s is unknown service\n" msgstr "rpcinfo：%s 是未知的服务\n" #: sunrpc/rpcinfo.c:751 #, c-format msgid "rpcinfo: %s is unknown host\n" msgstr "rpcinfo：%s 是未知的主机\n" #: sunrpc/svc_run.c:71 msgid "svc_run: - out of memory" msgstr "svc_run： - 内存不足" #: sunrpc/svc_run.c:91 msgid "svc_run: - poll failed" msgstr "" #: sunrpc/svc_simple.c:80 #, c-format msgid "can't reassign procedure number %ld\n" msgstr "无法重新指定进程编号 %ld\n" #: sunrpc/svc_simple.c:90 msgid "couldn't create an rpc server\n" msgstr "无法创建 rpc 服务器\n" #: sunrpc/svc_simple.c:98 #, c-format msgid "couldn't register prog %ld vers %ld\n" msgstr "无法注册程序 %ld 版本 %ld\n" #: sunrpc/svc_simple.c:106 msgid "registerrpc: out of memory\n" msgstr "registerrpc：内存不足\n" #: sunrpc/svc_simple.c:169 #, c-format msgid "trouble replying to prog %d\n" msgstr "" #: sunrpc/svc_simple.c:178 #, c-format msgid "never registered prog %d\n" msgstr "从未注册的程序 %d\n" #: sunrpc/svc_tcp.c:164 msgid "svc_tcp.c - tcp socket creation problem" msgstr "svc_tcp.c - tcp 套接字创建问题" #: sunrpc/svc_tcp.c:179 msgid "svc_tcp.c - cannot getsockname or listen" msgstr "svc_tcp.c - 无法进行 getsockname 或 listen 操作" #: sunrpc/svc_udp.c:137 msgid "svcudp_create: socket creation problem" msgstr "svcudp_create: 套接字创建问题" #: sunrpc/svc_udp.c:151 msgid "svcudp_create - cannot getsockname" msgstr "svcudp_create - 无法调用 getsockname" #: sunrpc/svc_udp.c:183 msgid "svcudp_create: xp_pad is too small for IP_PKTINFO\n" msgstr "svcudp_create：xp_pad 对 IP_PKTINFO 来说太小\n" #: sunrpc/svc_udp.c:495 msgid "enablecache: cache already enabled" msgstr "enablecache：缓冲区已经启用" #: sunrpc/svc_udp.c:501 msgid "enablecache: could not allocate cache" msgstr "enablecache：无法分配缓冲区" #: sunrpc/svc_udp.c:510 msgid "enablecache: could not allocate cache data" msgstr "enablecache：无法分配缓冲区数据" #: sunrpc/svc_udp.c:518 msgid "enablecache: could not allocate cache fifo" msgstr "" #: sunrpc/svc_udp.c:554 msgid "cache_set: victim not found" msgstr "cache_set：找不到 victim" #: sunrpc/svc_udp.c:565 msgid "cache_set: victim alloc failed" msgstr "cache_set：分配 victim 失败" #: sunrpc/svc_udp.c:572 msgid "cache_set: could not allocate new rpc_buffer" msgstr "cache_set：无法分配新的 rpc_buffer" #: sunrpc/svc_unix.c:162 msgid "svc_unix.c - AF_UNIX socket creation problem" msgstr "svc_unix.c - AF_UNIX 套接字创建问题" #: sunrpc/svc_unix.c:178 msgid "svc_unix.c - cannot getsockname or listen" msgstr "svc_unix.c - 无法进行 getsockname 或 listen 操作" #: sysdeps/generic/siglist.h:28 msgid "Hangup" msgstr "挂起" #: sysdeps/generic/siglist.h:29 msgid "Interrupt" msgstr "中断" #: sysdeps/generic/siglist.h:30 msgid "Quit" msgstr "退出" #: sysdeps/generic/siglist.h:31 msgid "Illegal instruction" msgstr "非法指令" #: sysdeps/generic/siglist.h:32 msgid "Trace/breakpoint trap" msgstr "" #: sysdeps/generic/siglist.h:33 msgid "Aborted" msgstr "已放弃" #: sysdeps/generic/siglist.h:34 msgid "Floating point exception" msgstr "浮点数例外" #: sysdeps/generic/siglist.h:35 msgid "Killed" msgstr "已杀死" #: sysdeps/generic/siglist.h:36 msgid "Bus error" msgstr "总线错误" #: sysdeps/generic/siglist.h:37 msgid "Segmentation fault" msgstr "段错误" #. TRANS Broken pipe; there is no process reading from the other end of a pipe. #. TRANS Every library function that returns this error code also generates a #. TRANS @code{SIGPIPE} signal; this signal terminates the program if not handled #. TRANS or blocked. Thus, your program will never actually see @code{EPIPE} #. TRANS unless it has handled or blocked @code{SIGPIPE}. #: sysdeps/generic/siglist.h:38 sysdeps/gnu/errlist.c:360 msgid "Broken pipe" msgstr "断开的管道" #: sysdeps/generic/siglist.h:39 msgid "Alarm clock" msgstr "闹钟" #: sysdeps/generic/siglist.h:40 msgid "Terminated" msgstr "已终止" #: sysdeps/generic/siglist.h:41 msgid "Urgent I/O condition" msgstr "" #: sysdeps/generic/siglist.h:42 msgid "Stopped (signal)" msgstr "停止 (信号)" #: sysdeps/generic/siglist.h:43 msgid "Stopped" msgstr "停止" #: sysdeps/generic/siglist.h:44 msgid "Continued" msgstr "继续" #: sysdeps/generic/siglist.h:45 msgid "Child exited" msgstr "子进程已退出" #: sysdeps/generic/siglist.h:46 msgid "Stopped (tty input)" msgstr "停止 (tty 输入)" #: sysdeps/generic/siglist.h:47 msgid "Stopped (tty output)" msgstr "停止 (tty 输出)" #: sysdeps/generic/siglist.h:48 msgid "I/O possible" msgstr "" #: sysdeps/generic/siglist.h:49 msgid "CPU time limit exceeded" msgstr "超出 CPU 时限" #: sysdeps/generic/siglist.h:50 msgid "File size limit exceeded" msgstr "文件大小超出限制" #: sysdeps/generic/siglist.h:51 msgid "Virtual timer expired" msgstr "虚拟计时器超时" #: sysdeps/generic/siglist.h:52 msgid "Profiling timer expired" msgstr "" #: sysdeps/generic/siglist.h:53 msgid "User defined signal 1" msgstr "用户定义信号 1" #: sysdeps/generic/siglist.h:54 msgid "User defined signal 2" msgstr "用户定义信号 2" #: sysdeps/generic/siglist.h:58 msgid "EMT trap" msgstr "" #: sysdeps/generic/siglist.h:61 msgid "Bad system call" msgstr "错误的系统调用" #: sysdeps/generic/siglist.h:64 msgid "Stack fault" msgstr "栈失效" #: sysdeps/generic/siglist.h:67 msgid "Information request" msgstr "信息请求" #: sysdeps/generic/siglist.h:69 msgid "Power failure" msgstr "电源失效" #: sysdeps/generic/siglist.h:72 msgid "Resource lost" msgstr "资源丢失" #: sysdeps/generic/siglist.h:75 msgid "Window changed" msgstr "" #. TRANS Operation not permitted; only the owner of the file (or other resource) #. TRANS or processes with special privileges can perform the operation. #: sysdeps/gnu/errlist.c:26 msgid "Operation not permitted" msgstr "不允许的操作" #. TRANS No process matches the specified process ID. #: sysdeps/gnu/errlist.c:46 msgid "No such process" msgstr "没有那个进程" #. TRANS Interrupted function call; an asynchronous signal occurred and prevented #. TRANS completion of the call. When this happens, you should try the call #. TRANS again. #. TRANS #. TRANS You can choose to have functions resume after a signal that is handled, #. TRANS rather than failing with @code{EINTR}; see @ref{Interrupted #. TRANS Primitives}. #: sysdeps/gnu/errlist.c:61 msgid "Interrupted system call" msgstr "被中断的系统调用" #. TRANS Input/output error; usually used for physical read or write errors. #: sysdeps/gnu/errlist.c:70 msgid "Input/output error" msgstr "输入/输出错误" #. TRANS No such device or address. The system tried to use the device #. TRANS represented by a file you specified, and it couldn't find the device. #. TRANS This can mean that the device file was installed incorrectly, or that #. TRANS the physical device is missing or not correctly attached to the #. TRANS computer. #: sysdeps/gnu/errlist.c:83 msgid "No such device or address" msgstr "没有那个设备或地址" #. TRANS Argument list too long; used when the arguments passed to a new program #. TRANS being executed with one of the @code{exec} functions (@pxref{Executing a #. TRANS File}) occupy too much memory space. This condition never arises on #. TRANS @gnuhurdsystems{}. #: sysdeps/gnu/errlist.c:95 msgid "Argument list too long" msgstr "参数列表过长" #. TRANS Invalid executable file format. This condition is detected by the #. TRANS @code{exec} functions; see @ref{Executing a File}. #: sysdeps/gnu/errlist.c:105 msgid "Exec format error" msgstr "可执行文件格式错误" #. TRANS Bad file descriptor; for example, I/O on a descriptor that has been #. TRANS closed or reading from a descriptor open only for writing (or vice #. TRANS versa). #: sysdeps/gnu/errlist.c:116 msgid "Bad file descriptor" msgstr "错误的文件描述符" #. TRANS There are no child processes. This error happens on operations that are #. TRANS supposed to manipulate child processes, when there aren't any processes #. TRANS to manipulate. #: sysdeps/gnu/errlist.c:127 msgid "No child processes" msgstr "没有子进程" #. TRANS Deadlock avoided; allocating a system resource would have resulted in a #. TRANS deadlock situation. The system does not guarantee that it will notice #. TRANS all such situations. This error means you got lucky and the system #. TRANS noticed; it might just hang. @xref{File Locks}, for an example. #: sysdeps/gnu/errlist.c:139 msgid "Resource deadlock avoided" msgstr "已避免资源死锁" #. TRANS No memory available. The system cannot allocate more virtual memory #. TRANS because its capacity is full. #: sysdeps/gnu/errlist.c:149 msgid "Cannot allocate memory" msgstr "无法分配内存" #. TRANS Bad address; an invalid pointer was detected. #. TRANS On @gnuhurdsystems{}, this error never happens; you get a signal instead. #: sysdeps/gnu/errlist.c:168 msgid "Bad address" msgstr "错误的地址" #. TRANS A file that isn't a block special file was given in a situation that #. TRANS requires one. For example, trying to mount an ordinary file as a file #. TRANS system in Unix gives this error. #: sysdeps/gnu/errlist.c:179 msgid "Block device required" msgstr "需要块设备" #. TRANS Resource busy; a system resource that can't be shared is already in use. #. TRANS For example, if you try to delete a file that is the root of a currently #. TRANS mounted filesystem, you get this error. #: sysdeps/gnu/errlist.c:190 msgid "Device or resource busy" msgstr "设备或资源忙" #. TRANS File exists; an existing file was specified in a context where it only #. TRANS makes sense to specify a new file. #: sysdeps/gnu/errlist.c:200 msgid "File exists" msgstr "文件已存在" #. TRANS An attempt to make an improper link across file systems was detected. #. TRANS This happens not only when you use @code{link} (@pxref{Hard Links}) but #. TRANS also when you rename a file with @code{rename} (@pxref{Renaming Files}). #: sysdeps/gnu/errlist.c:211 msgid "Invalid cross-device link" msgstr "无效的跨设备连接" #. TRANS The wrong type of device was given to a function that expects a #. TRANS particular sort of device. #: sysdeps/gnu/errlist.c:221 msgid "No such device" msgstr "没有那个设备" #. TRANS A file that isn't a directory was specified when a directory is required. #: sysdeps/gnu/errlist.c:230 msgid "Not a directory" msgstr "不是目录" #. TRANS File is a directory; you cannot open a directory for writing, #. TRANS or create or remove hard links to it. #: sysdeps/gnu/errlist.c:240 msgid "Is a directory" msgstr "是一个目录" #. TRANS Invalid argument. This is used to indicate various kinds of problems #. TRANS with passing the wrong argument to a library function. #: sysdeps/gnu/errlist.c:250 msgid "Invalid argument" msgstr "无效的参数" #. TRANS The current process has too many files open and can't open any more. #. TRANS Duplicate descriptors do count toward this limit. #. TRANS #. TRANS In BSD and GNU, the number of open files is controlled by a resource #. TRANS limit that can usually be increased. If you get this error, you might #. TRANS want to increase the @code{RLIMIT_NOFILE} limit or make it unlimited; #. TRANS @pxref{Limits on Resources}. #: sysdeps/gnu/errlist.c:265 msgid "Too many open files" msgstr "打开的文件过多" #. TRANS There are too many distinct file openings in the entire system. Note #. TRANS that any number of linked channels count as just one file opening; see #. TRANS @ref{Linked Channels}. This error never occurs on @gnuhurdsystems{}. #: sysdeps/gnu/errlist.c:276 msgid "Too many open files in system" msgstr "系统中打开的文件过多" #. TRANS Inappropriate I/O control operation, such as trying to set terminal #. TRANS modes on an ordinary file. #: sysdeps/gnu/errlist.c:286 msgid "Inappropriate ioctl for device" msgstr "对设备不适当的 ioctl 操作" #. TRANS An attempt to execute a file that is currently open for writing, or #. TRANS write to a file that is currently being executed. Often using a #. TRANS debugger to run a program is considered having it open for writing and #. TRANS will cause this error. (The name stands for ``text file busy''.) This #. TRANS is not an error on @gnuhurdsystems{}; the text is copied as necessary. #: sysdeps/gnu/errlist.c:299 msgid "Text file busy" msgstr "文本文件忙" #. TRANS File too big; the size of a file would be larger than allowed by the system. #: sysdeps/gnu/errlist.c:308 msgid "File too large" msgstr "文件过大" #. TRANS No space left on device; write operation on a file failed because the #. TRANS disk is full. #: sysdeps/gnu/errlist.c:318 msgid "No space left on device" msgstr "设备上没有空间" #. TRANS Invalid seek operation (such as on a pipe). #: sysdeps/gnu/errlist.c:327 msgid "Illegal seek" msgstr "非法 seek 操作" #. TRANS An attempt was made to modify something on a read-only file system. #: sysdeps/gnu/errlist.c:336 msgid "Read-only file system" msgstr "只读文件系统" #. TRANS Too many links; the link count of a single file would become too large. #. TRANS @code{rename} can cause this error if the file being renamed already has #. TRANS as many links as it can take (@pxref{Renaming Files}). #: sysdeps/gnu/errlist.c:347 msgid "Too many links" msgstr "过多的连接" #. TRANS Domain error; used by mathematical functions when an argument value does #. TRANS not fall into the domain over which the function is defined. #: sysdeps/gnu/errlist.c:370 msgid "Numerical argument out of domain" msgstr "数值参数超出域" #. TRANS Range error; used by mathematical functions when the result value is #. TRANS not representable because of overflow or underflow. #: sysdeps/gnu/errlist.c:380 msgid "Numerical result out of range" msgstr "数值结果超出范围" #. TRANS Resource temporarily unavailable; the call might work if you try again #. TRANS later. The macro @code{EWOULDBLOCK} is another name for @code{EAGAIN}; #. TRANS they are always the same in @theglibc{}. #. TRANS #. TRANS This error can happen in a few different situations: #. TRANS #. TRANS @itemize @bullet #. TRANS @item #. TRANS An operation that would block was attempted on an object that has #. TRANS non-blocking mode selected. Trying the same operation again will block #. TRANS until some external condition makes it possible to read, write, or #. TRANS connect (whatever the operation). You can use @code{select} to find out #. TRANS when the operation will be possible; @pxref{Waiting for I/O}. #. TRANS #. TRANS @strong{Portability Note:} In many older Unix systems, this condition #. TRANS was indicated by @code{EWOULDBLOCK}, which was a distinct error code #. TRANS different from @code{EAGAIN}. To make your program portable, you should #. TRANS check for both codes and treat them the same. #. TRANS #. TRANS @item #. TRANS A temporary resource shortage made an operation impossible. @code{fork} #. TRANS can return this error. It indicates that the shortage is expected to #. TRANS pass, so your program can try the call again later and it may succeed. #. TRANS It is probably a good idea to delay for a few seconds before trying it #. TRANS again, to allow time for other processes to release scarce resources. #. TRANS Such shortages are usually fairly serious and affect the whole system, #. TRANS so usually an interactive program should report the error to the user #. TRANS and return to its command loop. #. TRANS @end itemize #: sysdeps/gnu/errlist.c:417 msgid "Resource temporarily unavailable" msgstr "资源暂时不可用" #. TRANS In @theglibc{}, this is another name for @code{EAGAIN} (above). #. TRANS The values are always the same, on every operating system. #. TRANS #. TRANS C libraries in many older Unix systems have @code{EWOULDBLOCK} as a #. TRANS separate error code. #: sysdeps/gnu/errlist.c:430 msgid "Operation would block" msgstr "操作将阻塞" #. TRANS An operation that cannot complete immediately was initiated on an object #. TRANS that has non-blocking mode selected. Some functions that must always #. TRANS block (such as @code{connect}; @pxref{Connecting}) never return #. TRANS @code{EAGAIN}. Instead, they return @code{EINPROGRESS} to indicate that #. TRANS the operation has begun and will take some time. Attempts to manipulate #. TRANS the object before the call completes return @code{EALREADY}. You can #. TRANS use the @code{select} function to find out when the pending operation #. TRANS has completed; @pxref{Waiting for I/O}. #: sysdeps/gnu/errlist.c:446 msgid "Operation now in progress" msgstr "操作现在正在进行" #. TRANS An operation is already in progress on an object that has non-blocking #. TRANS mode selected. #: sysdeps/gnu/errlist.c:456 msgid "Operation already in progress" msgstr "操作已经在进行" #. TRANS A file that isn't a socket was specified when a socket is required. #: sysdeps/gnu/errlist.c:465 msgid "Socket operation on non-socket" msgstr "对非套接字进行套接字操作" #. TRANS The size of a message sent on a socket was larger than the supported #. TRANS maximum size. #: sysdeps/gnu/errlist.c:475 msgid "Message too long" msgstr "消息过长" #. TRANS The socket type does not support the requested communications protocol. #: sysdeps/gnu/errlist.c:484 msgid "Protocol wrong type for socket" msgstr "错误的 socket 协议类型" #. TRANS You specified a socket option that doesn't make sense for the #. TRANS particular protocol being used by the socket. @xref{Socket Options}. #: sysdeps/gnu/errlist.c:494 msgid "Protocol not available" msgstr "不可用的协议" #. TRANS The socket domain does not support the requested communications protocol #. TRANS (perhaps because the requested protocol is completely invalid). #. TRANS @xref{Creating a Socket}. #: sysdeps/gnu/errlist.c:505 msgid "Protocol not supported" msgstr "不支持的协议" #. TRANS The socket type is not supported. #: sysdeps/gnu/errlist.c:514 msgid "Socket type not supported" msgstr "不支持的套接字类型" #. TRANS The operation you requested is not supported. Some socket functions #. TRANS don't make sense for all types of sockets, and others may not be #. TRANS implemented for all communications protocols. On @gnuhurdsystems{}, this #. TRANS error can happen for many calls when the object does not support the #. TRANS particular operation; it is a generic indication that the server knows #. TRANS nothing to do for that call. #: sysdeps/gnu/errlist.c:528 msgid "Operation not supported" msgstr "不支持的操作" #. TRANS The socket communications protocol family you requested is not supported. #: sysdeps/gnu/errlist.c:537 msgid "Protocol family not supported" msgstr "不支持的协议族" #. TRANS The address family specified for a socket is not supported; it is #. TRANS inconsistent with the protocol being used on the socket. @xref{Sockets}. #: sysdeps/gnu/errlist.c:547 msgid "Address family not supported by protocol" msgstr "协议不支持的地址族" #. TRANS The requested socket address is already in use. @xref{Socket Addresses}. #: sysdeps/gnu/errlist.c:556 msgid "Address already in use" msgstr "地址已在使用" #. TRANS The requested socket address is not available; for example, you tried #. TRANS to give a socket a name that doesn't match the local host name. #. TRANS @xref{Socket Addresses}. #: sysdeps/gnu/errlist.c:567 msgid "Cannot assign requested address" msgstr "无法指定被请求的地址" #. TRANS A socket operation failed because the network was down. #: sysdeps/gnu/errlist.c:576 msgid "Network is down" msgstr "网络已关闭" #. TRANS A socket operation failed because the subnet containing the remote host #. TRANS was unreachable. #: sysdeps/gnu/errlist.c:586 msgid "Network is unreachable" msgstr "网络不可达" #. TRANS A network connection was reset because the remote host crashed. #: sysdeps/gnu/errlist.c:595 msgid "Network dropped connection on reset" msgstr "重置时断开网络连接" #. TRANS A network connection was aborted locally. #: sysdeps/gnu/errlist.c:604 msgid "Software caused connection abort" msgstr "由软件导致的连接断开" #. TRANS A network connection was closed for reasons outside the control of the #. TRANS local host, such as by the remote machine rebooting or an unrecoverable #. TRANS protocol violation. #: sysdeps/gnu/errlist.c:615 msgid "Connection reset by peer" msgstr "" #. TRANS The kernel's buffers for I/O operations are all in use. In GNU, this #. TRANS error is always synonymous with @code{ENOMEM}; you may get one or the #. TRANS other from network operations. #: sysdeps/gnu/errlist.c:626 msgid "No buffer space available" msgstr "没有可用的缓冲区空间" #. TRANS You tried to connect a socket that is already connected. #. TRANS @xref{Connecting}. #: sysdeps/gnu/errlist.c:636 msgid "Transport endpoint is already connected" msgstr "传输端点已连接" #. TRANS The socket is not connected to anything. You get this error when you #. TRANS try to transmit data over a socket, without first specifying a #. TRANS destination for the data. For a connectionless socket (for datagram #. TRANS protocols, such as UDP), you get @code{EDESTADDRREQ} instead. #: sysdeps/gnu/errlist.c:648 msgid "Transport endpoint is not connected" msgstr "传输端点尚未连接" #. TRANS No default destination address was set for the socket. You get this #. TRANS error when you try to transmit data over a connectionless socket, #. TRANS without first specifying a destination for the data with @code{connect}. #: sysdeps/gnu/errlist.c:659 msgid "Destination address required" msgstr "需要目标地址" #. TRANS The socket has already been shut down. #: sysdeps/gnu/errlist.c:668 msgid "Cannot send after transport endpoint shutdown" msgstr "无法在传输端点关闭以后发送" #. TRANS ??? #: sysdeps/gnu/errlist.c:677 msgid "Too many references: cannot splice" msgstr "过多的引用：无法接合" #. TRANS A socket operation with a specified timeout received no response during #. TRANS the timeout period. #: sysdeps/gnu/errlist.c:687 msgid "Connection timed out" msgstr "连接超时" #. TRANS A remote host refused to allow the network connection (typically because #. TRANS it is not running the requested service). #: sysdeps/gnu/errlist.c:697 msgid "Connection refused" msgstr "拒绝连接" #. TRANS Too many levels of symbolic links were encountered in looking up a file name. #. TRANS This often indicates a cycle of symbolic links. #: sysdeps/gnu/errlist.c:707 msgid "Too many levels of symbolic links" msgstr "符号连接的层数过多" #. TRANS Filename too long (longer than @code{PATH_MAX}; @pxref{Limits for #. TRANS Files}) or host name too long (in @code{gethostname} or #. TRANS @code{sethostname}; @pxref{Host Identification}). #: sysdeps/gnu/errlist.c:718 msgid "File name too long" msgstr "文件名过长" #. TRANS The remote host for a requested network connection is down. #: sysdeps/gnu/errlist.c:727 msgid "Host is down" msgstr "主机关闭" #. TRANS The remote host for a requested network connection is not reachable. #: sysdeps/gnu/errlist.c:736 msgid "No route to host" msgstr "没有到主机的路由" #. TRANS Directory not empty, where an empty directory was expected. Typically, #. TRANS this error occurs when you are trying to delete a directory. #: sysdeps/gnu/errlist.c:746 msgid "Directory not empty" msgstr "目录非空" #. TRANS This means that the per-user limit on new process would be exceeded by #. TRANS an attempted @code{fork}. @xref{Limits on Resources}, for details on #. TRANS the @code{RLIMIT_NPROC} limit. #: sysdeps/gnu/errlist.c:757 msgid "Too many processes" msgstr "进程过多" #. TRANS The file quota system is confused because there are too many users. #. TRANS @c This can probably happen in a GNU system when using NFS. #: sysdeps/gnu/errlist.c:767 msgid "Too many users" msgstr "用户过多" #. TRANS The user's disk quota was exceeded. #: sysdeps/gnu/errlist.c:776 msgid "Disk quota exceeded" msgstr "超出磁盘限额" #. TRANS Stale file handle. This indicates an internal confusion in the #. TRANS file system which is due to file system rearrangements on the server host #. TRANS for NFS file systems or corruption in other file systems. #. TRANS Repairing this condition usually requires unmounting, possibly repairing #. TRANS and remounting the file system. #: sysdeps/gnu/errlist.c:789 msgid "Stale file handle" msgstr "" #. TRANS An attempt was made to NFS-mount a remote file system with a file name that #. TRANS already specifies an NFS-mounted file. #. TRANS (This is an error on some operating systems, but we expect it to work #. TRANS properly on @gnuhurdsystems{}, making this error code impossible.) #: sysdeps/gnu/errlist.c:801 msgid "Object is remote" msgstr "对象是远程的" #. TRANS ??? #: sysdeps/gnu/errlist.c:810 msgid "RPC struct is bad" msgstr "RPC 结构错误" #. TRANS ??? #: sysdeps/gnu/errlist.c:819 msgid "RPC version wrong" msgstr "RPC 版本错误" #. TRANS ??? #: sysdeps/gnu/errlist.c:828 msgid "RPC program not available" msgstr "RPC 程序不可用" #. TRANS ??? #: sysdeps/gnu/errlist.c:837 msgid "RPC program version wrong" msgstr "RPC 程序版本错误" #. TRANS ??? #: sysdeps/gnu/errlist.c:846 msgid "RPC bad procedure for program" msgstr "" #. TRANS No locks available. This is used by the file locking facilities; see #. TRANS @ref{File Locks}. This error is never generated by @gnuhurdsystems{}, but #. TRANS it can result from an operation to an NFS server running another #. TRANS operating system. #: sysdeps/gnu/errlist.c:858 msgid "No locks available" msgstr "没有可用的锁" #. TRANS Inappropriate file type or format. The file was the wrong type for the #. TRANS operation, or a data file had the wrong format. #. TRANS #. TRANS On some systems @code{chmod} returns this error if you try to set the #. TRANS sticky bit on a non-directory file; @pxref{Setting Permissions}. #: sysdeps/gnu/errlist.c:871 msgid "Inappropriate file type or format" msgstr "不适当的文件类型或格式" #. TRANS ??? #: sysdeps/gnu/errlist.c:880 msgid "Authentication error" msgstr "认证错误" #. TRANS ??? #: sysdeps/gnu/errlist.c:889 msgid "Need authenticator" msgstr "需要认证器" #. TRANS Function not implemented. This indicates that the function called is #. TRANS not implemented at all, either in the C library itself or in the #. TRANS operating system. When you get this error, you can be sure that this #. TRANS particular function will always fail with @code{ENOSYS} unless you #. TRANS install a new version of the C library or the operating system. #: sysdeps/gnu/errlist.c:902 msgid "Function not implemented" msgstr "函数未实现" #. TRANS Not supported. A function returns this error when certain parameter #. TRANS values are valid, but the functionality they request is not available. #. TRANS This can mean that the function does not implement a particular command #. TRANS or option value or flag bit at all. For functions that operate on some #. TRANS object given in a parameter, such as a file descriptor or a port, it #. TRANS might instead mean that only @emph{that specific object} (file #. TRANS descriptor, port, etc.) is unable to support the other parameters given; #. TRANS different file descriptors might support different ranges of parameter #. TRANS values. #. TRANS #. TRANS If the entire function is not available at all in the implementation, #. TRANS it returns @code{ENOSYS} instead. #: sysdeps/gnu/errlist.c:922 msgid "Not supported" msgstr "不支持" #. TRANS While decoding a multibyte character the function came along an invalid #. TRANS or an incomplete sequence of bytes or the given wide character is invalid. #: sysdeps/gnu/errlist.c:932 msgid "Invalid or incomplete multibyte or wide character" msgstr "无效或不完整的多字节字符或宽字符" #. TRANS On @gnuhurdsystems{}, servers supporting the @code{term} protocol return #. TRANS this error for certain operations when the caller is not in the #. TRANS foreground process group of the terminal. Users do not usually see this #. TRANS error because functions such as @code{read} and @code{write} translate #. TRANS it into a @code{SIGTTIN} or @code{SIGTTOU} signal. @xref{Job Control}, #. TRANS for information on process groups and these signals. #: sysdeps/gnu/errlist.c:946 msgid "Inappropriate operation for background process" msgstr "对后台进程的不适当操作" #. TRANS On @gnuhurdsystems{}, opening a file returns this error when the file is #. TRANS translated by a program and the translator program dies while starting #. TRANS up, before it has connected to the file. #: sysdeps/gnu/errlist.c:957 msgid "Translator died" msgstr "" #. TRANS The experienced user will know what is wrong. #. TRANS @c This error code is a joke. Its perror text is part of the joke. #. TRANS @c Don't change it. #: sysdeps/gnu/errlist.c:968 msgid "?" msgstr "？" #. TRANS You did @strong{what}? #: sysdeps/gnu/errlist.c:977 msgid "You really blew it this time" msgstr "" #. TRANS Go home and have a glass of warm, dairy-fresh milk. #: sysdeps/gnu/errlist.c:986 msgid "Computer bought the farm" msgstr "" #. TRANS This error code has no purpose. #: sysdeps/gnu/errlist.c:995 msgid "Gratuitous error" msgstr "" #: sysdeps/gnu/errlist.c:1003 msgid "Bad message" msgstr "错误的消息" #: sysdeps/gnu/errlist.c:1011 msgid "Identifier removed" msgstr "标识符已删除" #: sysdeps/gnu/errlist.c:1019 msgid "Multihop attempted" msgstr "" #: sysdeps/gnu/errlist.c:1027 msgid "No data available" msgstr "没有可用的数据" #: sysdeps/gnu/errlist.c:1035 msgid "Link has been severed" msgstr "" #: sysdeps/gnu/errlist.c:1043 msgid "No message of desired type" msgstr "" #: sysdeps/gnu/errlist.c:1051 msgid "Out of streams resources" msgstr "流资源不足" #: sysdeps/gnu/errlist.c:1059 msgid "Device not a stream" msgstr "设备不是流" #: sysdeps/gnu/errlist.c:1067 msgid "Value too large for defined data type" msgstr "对已定义的数据类型来说值过大" #: sysdeps/gnu/errlist.c:1075 msgid "Protocol error" msgstr "协议错误" #: sysdeps/gnu/errlist.c:1083 msgid "Timer expired" msgstr "计时器超时" #. TRANS Operation canceled; an asynchronous operation was canceled before it #. TRANS completed. @xref{Asynchronous I/O}. When you call @code{aio_cancel}, #. TRANS the normal result is for the operations affected to complete with this #. TRANS error; @pxref{Cancel AIO Operations}. #: sysdeps/gnu/errlist.c:1095 msgid "Operation canceled" msgstr "操作已取消" #: sysdeps/gnu/errlist.c:1103 msgid "Interrupted system call should be restarted" msgstr "被中断的系统调用应该重新启动" #: sysdeps/gnu/errlist.c:1111 msgid "Channel number out of range" msgstr "通道编号超出范围" #: sysdeps/gnu/errlist.c:1119 msgid "Level 2 not synchronized" msgstr "级别 2 尚未同步" #: sysdeps/gnu/errlist.c:1127 msgid "Level 3 halted" msgstr "级别 3 已关闭" #: sysdeps/gnu/errlist.c:1135 msgid "Level 3 reset" msgstr "级别 3 已重置" #: sysdeps/gnu/errlist.c:1143 msgid "Link number out of range" msgstr "连接数超出范围" #: sysdeps/gnu/errlist.c:1151 msgid "Protocol driver not attached" msgstr "未加载协议驱动程序" #: sysdeps/gnu/errlist.c:1159 msgid "No CSI structure available" msgstr "没有可用的 CSI 结构" #: sysdeps/gnu/errlist.c:1167 msgid "Level 2 halted" msgstr "级别 2 己关闭" #: sysdeps/gnu/errlist.c:1175 msgid "Invalid exchange" msgstr "无效的交换" #: sysdeps/gnu/errlist.c:1183 msgid "Invalid request descriptor" msgstr "无效的请求描述符" #: sysdeps/gnu/errlist.c:1191 msgid "Exchange full" msgstr "交换满" #: sysdeps/gnu/errlist.c:1199 msgid "No anode" msgstr "没有 anode" #: sysdeps/gnu/errlist.c:1207 msgid "Invalid request code" msgstr "无效的请求码" #: sysdeps/gnu/errlist.c:1215 msgid "Invalid slot" msgstr "" #: sysdeps/gnu/errlist.c:1223 msgid "File locking deadlock error" msgstr "文件锁死锁错误" #: sysdeps/gnu/errlist.c:1231 msgid "Bad font file format" msgstr "错误的字体文件格式" #: sysdeps/gnu/errlist.c:1239 msgid "Machine is not on the network" msgstr "机器不在网络中" #: sysdeps/gnu/errlist.c:1247 msgid "Package not installed" msgstr "包未安装" #: sysdeps/gnu/errlist.c:1255 msgid "Advertise error" msgstr "" #: sysdeps/gnu/errlist.c:1263 msgid "Srmount error" msgstr "" #: sysdeps/gnu/errlist.c:1271 msgid "Communication error on send" msgstr "发送时出现通讯错误" #: sysdeps/gnu/errlist.c:1279 msgid "RFS specific error" msgstr "" #: sysdeps/gnu/errlist.c:1287 msgid "Name not unique on network" msgstr "" #: sysdeps/gnu/errlist.c:1295 msgid "File descriptor in bad state" msgstr "文件描述符处于错误状态" #: sysdeps/gnu/errlist.c:1303 msgid "Remote address changed" msgstr "远程地址已改变" #: sysdeps/gnu/errlist.c:1311 msgid "Can not access a needed shared library" msgstr "无法访问必须的共享库" #: sysdeps/gnu/errlist.c:1319 msgid "Accessing a corrupted shared library" msgstr "正在访问一个已毁坏的共享库" #: sysdeps/gnu/errlist.c:1327 msgid ".lib section in a.out corrupted" msgstr "a.out 中的 .lib 节已毁坏" #: sysdeps/gnu/errlist.c:1335 msgid "Attempting to link in too many shared libraries" msgstr "试图于过多的共享库相连接" #: sysdeps/gnu/errlist.c:1343 msgid "Cannot exec a shared library directly" msgstr "无法直接执行共享库" #: sysdeps/gnu/errlist.c:1351 msgid "Streams pipe error" msgstr "流管道错误" #: sysdeps/gnu/errlist.c:1359 msgid "Structure needs cleaning" msgstr "结构需要清理" #: sysdeps/gnu/errlist.c:1367 msgid "Not a XENIX named type file" msgstr "不是 XENIX 命名的类型文件" #: sysdeps/gnu/errlist.c:1375 msgid "No XENIX semaphores available" msgstr "没有可用的 XENIX 信号量" #: sysdeps/gnu/errlist.c:1383 msgid "Is a named type file" msgstr "是一个有名类型文件" #: sysdeps/gnu/errlist.c:1391 msgid "Remote I/O error" msgstr "远程 I/O 错误" #: sysdeps/gnu/errlist.c:1399 msgid "No medium found" msgstr "找不到介质" #: sysdeps/gnu/errlist.c:1407 msgid "Wrong medium type" msgstr "错误的介质类型" #: sysdeps/gnu/errlist.c:1415 msgid "Required key not available" msgstr "需要的关键字不存在" #: sysdeps/gnu/errlist.c:1423 msgid "Key has expired" msgstr "关键字已过期" #: sysdeps/gnu/errlist.c:1431 msgid "Key has been revoked" msgstr "" #: sysdeps/gnu/errlist.c:1439 msgid "Key was rejected by service" msgstr "" #: sysdeps/gnu/errlist.c:1447 msgid "Owner died" msgstr "" #: sysdeps/gnu/errlist.c:1455 msgid "State not recoverable" msgstr "" #: sysdeps/gnu/errlist.c:1463 #, fuzzy #| msgid "Operation not applicable" msgid "Operation not possible due to RF-kill" msgstr "不可应用的操作" #: sysdeps/gnu/errlist.c:1471 msgid "Memory page has hardware error" msgstr "" #: sysdeps/mach/_strerror.c:56 msgid "Error in unknown error system: " msgstr "未知的错误系统中出错：" #: sysdeps/posix/gai_strerror-strs.h:1 msgid "Address family for hostname not supported" msgstr "不支持的主机名地址族" #: sysdeps/posix/gai_strerror-strs.h:2 msgid "Temporary failure in name resolution" msgstr "域名解析暂时失败" #: sysdeps/posix/gai_strerror-strs.h:3 msgid "Bad value for ai_flags" msgstr "错误的 ai_flags 的值" #: sysdeps/posix/gai_strerror-strs.h:4 msgid "Non-recoverable failure in name resolution" msgstr "域名解析中出现不可修复的失败" #: sysdeps/posix/gai_strerror-strs.h:5 msgid "ai_family not supported" msgstr "不支持 ai_family" #: sysdeps/posix/gai_strerror-strs.h:6 msgid "Memory allocation failure" msgstr "内存分配失败" #: sysdeps/posix/gai_strerror-strs.h:7 msgid "No address associated with hostname" msgstr "没有与主机名关联的地址" #: sysdeps/posix/gai_strerror-strs.h:8 msgid "Name or service not known" msgstr "未知的名称或服务" #: sysdeps/posix/gai_strerror-strs.h:9 msgid "Servname not supported for ai_socktype" msgstr "" #: sysdeps/posix/gai_strerror-strs.h:10 msgid "ai_socktype not supported" msgstr "不支持 ai_socktype" #: sysdeps/posix/gai_strerror-strs.h:11 msgid "System error" msgstr "系统错误" #: sysdeps/posix/gai_strerror-strs.h:12 msgid "Processing request in progress" msgstr "" #: sysdeps/posix/gai_strerror-strs.h:13 msgid "Request canceled" msgstr "请求已取消" #: sysdeps/posix/gai_strerror-strs.h:14 msgid "Request not canceled" msgstr "请求未取消" #: sysdeps/posix/gai_strerror-strs.h:15 msgid "All requests done" msgstr "完成所有请求" #: sysdeps/posix/gai_strerror-strs.h:16 msgid "Interrupted by a signal" msgstr "被信号中断" #: sysdeps/posix/gai_strerror-strs.h:17 msgid "Parameter string not correctly encoded" msgstr "" #: sysdeps/unix/sysv/linux/i386/readelflib.c:65 #, c-format msgid "%s is for unknown machine %d.\n" msgstr "%s 用于未知的机器 %d。\n" #: sysdeps/unix/sysv/linux/ia64/makecontext.c:58 #, c-format msgid "makecontext: does not know how to handle more than 8 arguments\n" msgstr "makecontext：不知道该如何处理多于 8 个参数的情况\n" #: sysdeps/unix/sysv/linux/lddlibc4.c:60 #, c-format msgid "" "Usage: lddlibc4 FILE\n" "\n" msgstr "" #: sysdeps/unix/sysv/linux/lddlibc4.c:81 #, c-format msgid "cannot open `%s'" msgstr "无法打开“%s”" #: sysdeps/unix/sysv/linux/lddlibc4.c:85 #, c-format msgid "cannot read header from `%s'" msgstr "无法从“%s”中读入头" #: timezone/zdump.c:282 msgid "lacks alphabetic at start" msgstr "" #: timezone/zdump.c:284 msgid "has fewer than 3 alphabetics" msgstr "" #: timezone/zdump.c:286 msgid "has more than 6 alphabetics" msgstr "" #: timezone/zdump.c:294 msgid "differs from POSIX standard" msgstr "" #: timezone/zdump.c:300 #, c-format msgid "%s: warning: zone \"%s\" abbreviation \"%s\" %s\n" msgstr "" #: timezone/zdump.c:309 #, fuzzy, c-format #| msgid "%s: usage is %s [ --version ] [ -v ] [ -c [loyear,]hiyear ] zonename ...\n" msgid "" "%s: usage: %s [--version] [--help] [-{vV}] [-{ct} [lo,]hi] zonename ...\n" "\n" "Report bugs to %s.\n" msgstr "%s：用法为 %s [ --version ] [ -v ] [ -c [loyear,]hiyear ] 区域名 ...\n" #: timezone/zdump.c:386 #, c-format msgid "%s: wild -c argument %s\n" msgstr "%s： 怪异的 -c 选项 %s\n" #: timezone/zdump.c:419 #, fuzzy, c-format #| msgid "%s: wild -c argument %s\n" msgid "%s: wild -t argument %s\n" msgstr "%s： 怪异的 -c 选项 %s\n" #: timezone/zdump.c:508 msgid "Error writing to standard output" msgstr "写入标准输出出错" #: timezone/zic.c:371 #, c-format msgid "%s: Memory exhausted: %s\n" msgstr "%s：内存耗尽：%s\n" #: timezone/zic.c:438 #, fuzzy, c-format #| msgid "\"%s\", line %d: %s" msgid "\"%s\", line %d: " msgstr "“%s”，行 %d：%s" #: timezone/zic.c:441 #, c-format msgid " (rule from \"%s\", line %d)" msgstr "" #: timezone/zic.c:460 #, c-format msgid "warning: " msgstr "警告：" #: timezone/zic.c:470 #, fuzzy, c-format #| msgid "" #| "%s: usage is %s [ --version ] [ -v ] [ -l localtime ] [ -p posixrules ] \\\n" #| "\t[ -d directory ] [ -L leapseconds ] [ -y yearistype ] [ filename ... ]\n" msgid "" "%s: usage is %s [ --version ] [ --help ] [ -v ] [ -l localtime ] [ -p posixrules ] \\\n" "\t[ -d directory ] [ -L leapseconds ] [ -y yearistype ] [ filename ... ]\n" "\n" "Report bugs to %s.\n" msgstr "" "%s：用法为 %s [ --version ] [ -v ] [ -l 本地时间 ] [ -p posix 规则 ] \\\n" "\t[ -d 目录 ] [ -L leapseconds ] [ -y yearistype ] [ 文件名 ... ]\n" #: timezone/zic.c:505 msgid "wild compilation-time specification of zic_t" msgstr "" #: timezone/zic.c:524 #, c-format msgid "%s: More than one -d option specified\n" msgstr "%s：给出了多个 -d 选项\n" #: timezone/zic.c:534 #, c-format msgid "%s: More than one -l option specified\n" msgstr "%s：给出了多个 -l 选项\n" #: timezone/zic.c:544 #, c-format msgid "%s: More than one -p option specified\n" msgstr "%s：给出了多个 -p 选项\n" #: timezone/zic.c:554 #, c-format msgid "%s: More than one -y option specified\n" msgstr "%s：给出了多个 -y 选项\n" #: timezone/zic.c:564 #, c-format msgid "%s: More than one -L option specified\n" msgstr "%s：给出了多个 -L 选项\n" #: timezone/zic.c:611 msgid "link to link" msgstr "链接到链接" #: timezone/zic.c:678 msgid "hard link failed, symbolic link used" msgstr "硬连接失败，使用符号连接" #: timezone/zic.c:688 #, fuzzy, c-format #| msgid "%s: Can't create %s: %s\n" msgid "%s: Can't read %s: %s\n" msgstr "%s：无法创建 %s：%s\n" #: timezone/zic.c:696 timezone/zic.c:1595 #, c-format msgid "%s: Can't create %s: %s\n" msgstr "%s：无法创建 %s：%s\n" #: timezone/zic.c:704 timezone/zic.c:939 #, c-format msgid "%s: Error reading %s\n" msgstr "%s：读 %s 错误\n" #: timezone/zic.c:710 timezone/zic.c:1792 #, c-format msgid "%s: Error writing %s\n" msgstr "%s：写 %s 错误\n" #: timezone/zic.c:714 #, fuzzy #| msgid "hard link failed, symbolic link used" msgid "link failed, copy used" msgstr "硬连接失败，使用符号连接" #: timezone/zic.c:802 timezone/zic.c:804 msgid "same rule name in multiple files" msgstr "多个文件中的相同规则名" #: timezone/zic.c:845 msgid "unruly zone" msgstr "" #: timezone/zic.c:852 #, c-format msgid "%s in ruleless zone" msgstr "" #: timezone/zic.c:872 msgid "standard input" msgstr "标准输入" #: timezone/zic.c:877 #, c-format msgid "%s: Can't open %s: %s\n" msgstr "%s：无法打开 %s：%s\n" #: timezone/zic.c:888 msgid "line too long" msgstr "行过长" #: timezone/zic.c:908 msgid "input line of unknown type" msgstr "未知类型的输入行" #: timezone/zic.c:924 #, c-format msgid "%s: Leap line in non leap seconds file %s\n" msgstr "" #: timezone/zic.c:931 timezone/zic.c:1339 timezone/zic.c:1361 #, c-format msgid "%s: panic: Invalid l_value %d\n" msgstr "" #: timezone/zic.c:946 #, c-format msgid "%s: Error closing %s: %s\n" msgstr "%s：关闭 %s 错误：%s\n" #: timezone/zic.c:951 msgid "expected continuation line not found" msgstr "找不到应该出现的续行" #: timezone/zic.c:992 timezone/zic.c:2644 timezone/zic.c:2658 msgid "time overflow" msgstr "时间溢出" #: timezone/zic.c:997 msgid "values over 24 hours not handled by pre-2007 versions of zic" msgstr "" #: timezone/zic.c:1008 msgid "wrong number of fields on Rule line" msgstr "规则行中域的个数错误" #: timezone/zic.c:1012 msgid "nameless rule" msgstr "无名规则" #: timezone/zic.c:1017 msgid "invalid saved time" msgstr "" #: timezone/zic.c:1034 msgid "wrong number of fields on Zone line" msgstr "区域行中域的个数错误" #: timezone/zic.c:1039 #, c-format msgid "\"Zone %s\" line and -l option are mutually exclusive" msgstr "" #: timezone/zic.c:1045 #, c-format msgid "\"Zone %s\" line and -p option are mutually exclusive" msgstr "" #: timezone/zic.c:1053 #, c-format msgid "duplicate zone name %s (file \"%s\", line %d)" msgstr "重复的区域名 %s (文件“%s”，行 %d)" #: timezone/zic.c:1066 msgid "wrong number of fields on Zone continuation line" msgstr "" #: timezone/zic.c:1103 #, fuzzy #| msgid "invalid UTC offset" msgid "invalid UT offset" msgstr "无效的 UTC 偏移量" #: timezone/zic.c:1106 msgid "invalid abbreviation format" msgstr "无效的缩略格式" #: timezone/zic.c:1135 msgid "Zone continuation line end time is not after end time of previous line" msgstr "" #: timezone/zic.c:1161 msgid "wrong number of fields on Leap line" msgstr "" #: timezone/zic.c:1170 msgid "invalid leaping year" msgstr "无效的闰年" #: timezone/zic.c:1190 timezone/zic.c:1293 msgid "invalid month name" msgstr "无效的月名称" #: timezone/zic.c:1203 timezone/zic.c:1406 timezone/zic.c:1420 msgid "invalid day of month" msgstr "无效的日" #: timezone/zic.c:1208 msgid "time too small" msgstr "" #: timezone/zic.c:1212 msgid "time too large" msgstr "时间过大" #: timezone/zic.c:1216 timezone/zic.c:1322 msgid "invalid time of day" msgstr "无效的时间" #: timezone/zic.c:1235 msgid "illegal CORRECTION field on Leap line" msgstr "" #: timezone/zic.c:1240 msgid "illegal Rolling/Stationary field on Leap line" msgstr "" #: timezone/zic.c:1246 msgid "leap second precedes Big Bang" msgstr "" #: timezone/zic.c:1259 msgid "wrong number of fields on Link line" msgstr "连接行中域的个数错误" #: timezone/zic.c:1263 msgid "blank FROM field on Link line" msgstr "Link 行中空白的 FROM 域" #: timezone/zic.c:1267 msgid "blank TO field on Link line" msgstr "Link 行中空白的 TO 域" #: timezone/zic.c:1343 msgid "invalid starting year" msgstr "无效的起始年份" #: timezone/zic.c:1365 msgid "invalid ending year" msgstr "无效的终止年份" #: timezone/zic.c:1369 msgid "starting year greater than ending year" msgstr "起始年份大于终止年份" #: timezone/zic.c:1376 msgid "typed single year" msgstr "" #: timezone/zic.c:1411 msgid "invalid weekday name" msgstr "无效的星期名" #: timezone/zic.c:1530 msgid "pre-2014 clients may mishandle more than 1200 transition times" msgstr "" #: timezone/zic.c:1585 #, c-format msgid "%s: Can't remove %s: %s\n" msgstr "%s：无法删除 %s：%s\n" #: timezone/zic.c:2143 msgid "no POSIX environment variable for zone" msgstr "" #: timezone/zic.c:2149 #, c-format msgid "%s: pre-%d clients may mishandle distant timestamps" msgstr "" #: timezone/zic.c:2329 msgid "can't determine time zone abbreviation to use just after until time" msgstr "" #: timezone/zic.c:2375 timezone/zic.c:2450 msgid "too many local time types" msgstr "过多的本地时间类型" #: timezone/zic.c:2423 msgid "internal error - addtype called with bad isdst" msgstr "内部错误 - 以错误的 isdst 调用 addtype" #: timezone/zic.c:2427 msgid "internal error - addtype called with bad ttisstd" msgstr "内部错误 - 以错误的 ttisstd 调用 addtype" #: timezone/zic.c:2431 msgid "internal error - addtype called with bad ttisgmt" msgstr "内部错误 - 以错误的 ttisgmt 调用 addtype" #: timezone/zic.c:2454 #, fuzzy #| msgid "UTC offset out of range" msgid "UT offset out of range" msgstr "UTC 偏移值超出范围" #: timezone/zic.c:2478 msgid "too many leap seconds" msgstr "" #: timezone/zic.c:2484 msgid "repeated leap second moment" msgstr "" #: timezone/zic.c:2534 msgid "Wild result from command execution" msgstr "" #: timezone/zic.c:2535 #, c-format msgid "%s: command was '%s', result was %d\n" msgstr "%s：命令为“%s”，结果为 %d\n" #: timezone/zic.c:2626 msgid "Odd number of quotation marks" msgstr "奇数个引号" #: timezone/zic.c:2703 msgid "use of 2/29 in non leap-year" msgstr "" #: timezone/zic.c:2738 msgid "rule goes past start/end of month--will not work with pre-2004 versions of zic" msgstr "" #: timezone/zic.c:2769 msgid "time zone abbreviation lacks alphabetic at start" msgstr "" #: timezone/zic.c:2771 msgid "time zone abbreviation has fewer than 3 alphabetics" msgstr "" #: timezone/zic.c:2773 msgid "time zone abbreviation has too many alphabetics" msgstr "" #: timezone/zic.c:2783 msgid "time zone abbreviation differs from POSIX standard" msgstr "" #: timezone/zic.c:2789 msgid "too many, or too long, time zone abbreviations" msgstr "过多或过长的时区缩写" #: timezone/zic.c:2829 #, c-format msgid "%s: Can't create directory %s: %s\n" msgstr "%s：无法创建目录 %s：%s\n" #~ msgid "Try \\`xtrace --help' for more information.\\n" #~ msgstr "试用“xtrace --help”以获取更多信息。\\n" #~ msgid "xtrace: option \\`$1' requires an argument.\\n" #~ msgstr "xtrace： 选项“$1”需要一个参数\\n" #~ msgid "Can't open configuration file %s" #~ msgstr "无法打开配置文件 %s" #~ msgid "Try \\`memusage --help' for more information." #~ msgstr "试用“memusage --help”以获取更多信息。" #~ msgid "memusage: option \\`$1' requires an argument" #~ msgstr "memusage：选项“$1”需要一个参数" #~ msgid "invalid value for 'reload-count': %u" #~ msgstr "“reload-count”的值无效: %u" #~ msgid "No usable database library found." #~ msgstr "未找到可用的数据库函数库" #~ msgid "while reading database" #~ msgstr "当读数据库" #~ msgid "%s: illegal option -- %c\n" #~ msgstr "%s：无效选项 -- %c\n" #~ msgid "authunix_create: out of memory\n" #~ msgstr "authunix_create：内存不足\n" #~ msgid "clnttcp_create: out of memory\n" #~ msgstr "clnttcp_create：内存不足\n" #~ msgid "clntudp_create: out of memory\n" #~ msgstr "clntudp_create：内存不足\n" #~ msgid "clntunix_create: out of memory\n" #~ msgstr "clntunix_create：内存不足\n" #~ msgid "svctcp_create: out of memory\n" #~ msgstr "svctcp_create：内存不足\n" #~ msgid "svc_tcp: makefd_xprt: out of memory\n" #~ msgstr "svc_tcp：makefd_xprt：内存不足\n" #~ msgid "svcudp_create: out of memory\n" #~ msgstr "svcudp_create：内存不足\n" #~ msgid "svcunix_create: out of memory\n" #~ msgstr "svcunix_create：内存不足\n" #~ msgid "svc_unix: makefd_xprt: out of memory\n" #~ msgstr "svc_unix：makefd_xprt：内存不足\n" #~ msgid "xdr_bytes: out of memory\n" #~ msgstr "xdr_bytes：内存不足\n" #~ msgid "xdr_string: out of memory\n" #~ msgstr "xdr_string：内存不足\n" #~ msgid "xdr_array: out of memory\n" #~ msgstr "xdr_array：内存不足\n" #~ msgid "xdrrec_create: out of memory\n" #~ msgstr "xdrrec_create：内存不足\n" #~ msgid "xdr_reference: out of memory\n" #~ msgstr "xdr_reference：内存不足\n" #~ msgid "Signal 0" #~ msgstr "信号 0" #~ msgid "Can't remove old temporary cache file %s" #~ msgstr "无法删除旧临时缓冲文件 %s" #~ msgid "Report bugs using the `glibcbug' script to .\n" #~ msgstr "用“glibcbug”脚本将错误报告给 。\n" #~ msgid "<%s> and <%s> are illegal names for range" #~ msgstr "<%s> 和 <%s> 是非法的范围名" #~ msgid "upper limit in range is not higher then lower limit" #~ msgstr "范围的上限并不高于下限" #~ msgid "%s: value for field `%s' must not be the empty string" #~ msgstr "%s：域“%s”的值不能是空字符串" #~ msgid "%s: values of field `%s' must not be larger than %d" #~ msgstr "%s：域“%s”的值不能大于 %d" #~ msgid "cheese" #~ msgstr "奶酪" #~ msgid "First string for testing." #~ msgstr "第一个用于测试的字符串。" #~ msgid "Another string for testing." #~ msgstr "另一个测试字符串。" #~ msgid "Error 0" #~ msgstr "错误 0" #~ msgid "Arg list too long" #~ msgstr "参数列表过长" #~ msgid "Bad file number" #~ msgstr "错误的文件编号" #~ msgid "Not enough space" #~ msgstr "空间不够" #~ msgid "Device busy" #~ msgstr "设备忙" #~ msgid "Cross-device link" #~ msgstr "跨设备连接" #~ msgid "File table overflow" #~ msgstr "文件表溢出" #~ msgid "Result too large" #~ msgstr "结果太大" #~ msgid "Deadlock situation detected/avoided" #~ msgstr "探测到/已避免死锁" #~ msgid "No record locks available" #~ msgstr "没有可用的记录锁" #~ msgid "Disc quota exceeded" #~ msgstr "超出磁盘限额" #~ msgid "Bad exchange descriptor" #~ msgstr "错误的交换描述符" #~ msgid "Bad request descriptor" #~ msgstr "错误的请求描述符" #~ msgid "Message tables full" #~ msgstr "内存表已满" #~ msgid "Anode table overflow" #~ msgstr "Anode 表溢出" #~ msgid "Bad request code" #~ msgstr "错误的请求码" #~ msgid "File locking deadlock" #~ msgstr "文件锁死锁" #~ msgid "Error 58" #~ msgstr "错误 58" #~ msgid "Error 59" #~ msgstr "错误 59" #~ msgid "Not a stream device" #~ msgstr "不是流设备" #~ msgid "Out of stream resources" #~ msgstr "流资源不足" #~ msgid "Error 72" #~ msgstr "错误 72" #~ msgid "Error 73" #~ msgstr "错误 73" #~ msgid "Error 75" #~ msgstr "错误 75" #~ msgid "Error 76" #~ msgstr "错误 76" #~ msgid "Not a data message" #~ msgstr "不是数据消息" #~ msgid "Attempting to link in more shared libraries than system limit" #~ msgstr "试图连接的共享库个数超出系统限制" #~ msgid "Can not exec a shared library directly" #~ msgstr "无法直接执行共享库" #~ msgid "Illegal byte sequence" #~ msgstr "非法的字节序" #~ msgid "Number of symbolic links encountered during path name traversal exceeds MAXSYMLINKS" #~ msgstr "路径遍历中遇到的符号连接的数量超过了 MAXSYMLINKS" #~ msgid "Error 91" #~ msgstr "错误 91" #~ msgid "Error 92" #~ msgstr "错误 92" #~ msgid "Option not supported by protocol" #~ msgstr "协议不支持的选项" #~ msgid "Error 100" #~ msgstr "错误 100" #~ msgid "Error 101" #~ msgstr "错误 101" #~ msgid "Error 102" #~ msgstr "错误 102" #~ msgid "Error 103" #~ msgstr "错误 103" #~ msgid "Error 104" #~ msgstr "错误 104" #~ msgid "Error 105" #~ msgstr "错误 105" #~ msgid "Error 106" #~ msgstr "错误 106" #~ msgid "Error 107" #~ msgstr "错误 107" #~ msgid "Error 108" #~ msgstr "错误 108" #~ msgid "Error 109" #~ msgstr "错误 109" #~ msgid "Error 110" #~ msgstr "错误 110" #~ msgid "Error 111" #~ msgstr "错误 111" #~ msgid "Error 112" #~ msgstr "错误 112" #~ msgid "Error 113" #~ msgstr "错误 113" #~ msgid "Error 114" #~ msgstr "错误 114" #~ msgid "Error 115" #~ msgstr "错误 115" #~ msgid "Error 116" #~ msgstr "错误 116" #~ msgid "Error 117" #~ msgstr "错误 117" #~ msgid "Error 118" #~ msgstr "错误 118" #~ msgid "Error 119" #~ msgstr "错误 119" #~ msgid "Operation not supported on transport endpoint" #~ msgstr "传输端点不支持的操作" #~ msgid "Address family not supported by protocol family" #~ msgstr "协议族不支持的地址族" #~ msgid "Network dropped connection because of reset" #~ msgstr "因为重置而断开网络连接" #~ msgid "Error 136" #~ msgstr "错误 136" #~ msgid "Not available" #~ msgstr "不可用" #~ msgid "Is a name file" #~ msgstr "是一个有名文件" #~ msgid "Reserved for future use" #~ msgstr "保留用于未来" #~ msgid "Error 142" #~ msgstr "错误 142" #~ msgid "Cannot send after socket shutdown" #~ msgstr "无法在套接字关闭后发送" #~ msgid "%s: Can't unlink %s: %s\n" #~ msgstr "%s：无法解除连接 %s：%s\n" #~ msgid "%s: line %d: expected service, found `%s'\n" #~ msgstr "%s：行 %d：应为 service，得到“%s”\n" #~ msgid "%s: line %d: cannot specify more than %d services" #~ msgstr "%s：行 %d：无法指定多于 %d 个服务" #~ msgid "%s: line %d: list delimiter not followed by keyword" #~ msgstr "%s：行 %d：列表分隔符没有出现在关键字之后" #~ msgid "get_myaddress: ioctl (get interface configuration)" #~ msgstr "get_myaddress：ioctl (获取界面配置)" #~ msgid "__get_myaddress: ioctl (get interface configuration)" #~ msgstr "__get_myaddress：ioctl (获取界面配置)" #~ msgid "broadcast: ioctl (get interface configuration)" #~ msgstr "broadcast：ioctl (获取界面配置)" #~ msgid "broadcast: ioctl (get interface flags)" #~ msgstr "broadcast：ioctl (获取界面标志)" #~ msgid "YPBINDPROC_DOMAIN: %s\n" #~ msgstr "YPBINDPROC_DOMAIN：%s\n" #~ msgid "while allocating hash table entry" #~ msgstr "分配杂凑表条目时" #~ msgid "while allocating cache: %s" #~ msgstr "分配缓冲区时：%s" #~ msgid "while accepting connection: %s" #~ msgstr "接受连接时：%s" #~ msgid "while allocating key copy" #~ msgstr "分配键副本时" #~ msgid "while allocating cache entry" #~ msgstr "分配缓冲区条目时" #~ msgid "Haven't found \"%d\" in group cache!" #~ msgstr "无法在组缓冲区中找到“%d”！" #~ msgid " no" #~ msgstr " 否" #~ msgid " yes" #~ msgstr " 是" #~ msgid "Haven't found \"%d\" in password cache!" #~ msgstr "无法在口令缓冲区中找到“%d”！" #~ msgid "shared object cannot be dlopen()ed: static TLS memory too small" #~ msgstr "无法用 dlopen() 打开共享对象：静态 TLS 内存过小" #~ msgid "Can't lstat %s" #~ msgstr "无法对 %s 进行 lstat 操作" #~ msgid "\t\t\t\t\t\t\t %s: value for field `%s' must be in range %d...%d" #~ msgstr "\t\t\t\t\t\t\t %s：域“%s”的值必须处于范围 %d...%d 之内"