# Make in zh_CN.
# Copyright (C) 2002 Free Software Foundation, Inc.
# This file is distributed under the same license as the make package.
# Wang Li <charles@linux.net.cn>, 2002.
# LI Daobing <lidaobing@gmail.com>, 2008, 2013.
# Mingye Wang <arthur200126@gmail.com>, 2015, 2016.
# Boyuan Yang <073plan@gmail.com>, 2018.
#
msgid ""
msgstr ""
"Project-Id-Version: make 4.2.1\n"
"Report-Msgid-Bugs-To: bug-make@gnu.org\n"
"POT-Creation-Date: 2016-06-10 19:03-0400\n"
"PO-Revision-Date: 2018-02-12 16:24+0800\n"
"Last-Translator: Boyuan Yang <073plan@gmail.com>\n"
"Language-Team: Chinese (simplified) <i18n-zh@googlegroups.com>\n"
"Language: zh_CN\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Bugs: Report translation errors to the Language-Team address.\n"
"X-Generator: Poedit 2.0.6\n"
"Plural-Forms: nplurals=1; plural=0;\n"

#: ar.c:46
#, c-format
msgid "attempt to use unsupported feature: '%s'"
msgstr "试图使用不支持的功能：“%s”"

#: ar.c:123
msgid "touch archive member is not available on VMS"
msgstr "VMS 系统上不支持 touch 归档成员"

#: ar.c:147
#, c-format
msgid "touch: Archive '%s' does not exist"
msgstr "touch：归档文件“%s”不存在"

#: ar.c:150
#, c-format
msgid "touch: '%s' is not a valid archive"
msgstr "touch：“%s”不是合法的归档文件"

#: ar.c:157
#, c-format
msgid "touch: Member '%s' does not exist in '%s'"
msgstr "touch：在“%2$s”中不存在成员“%1$s”"

#: ar.c:164
#, c-format
msgid "touch: Bad return code from ar_member_touch on '%s'"
msgstr "touch：“%s”上的 ar_member_touch 的返回码不当"

#: arscan.c:130
#, c-format
msgid "lbr$set_module() failed to extract module info, status = %d"
msgstr "lbr$set_modules() 获取模块信息失败，返回状态 = %d"

#: arscan.c:236
#, c-format
msgid "lbr$ini_control() failed with status = %d"
msgstr "lbr$ini_control() 失败，返回状态 = %d"

#: arscan.c:261
#, c-format
msgid "unable to open library '%s' to lookup member status %d"
msgstr "无法打开库“%s”以寻找成员，状态 %d"

#: arscan.c:965
#, c-format
msgid "Member '%s'%s: %ld bytes at %ld (%ld).\n"
msgstr "成员“%s”%s: %ld 字节于 %ld (%ld)。\n"

#: arscan.c:966
msgid " (name might be truncated)"
msgstr " (名称可能被截断)"

#: arscan.c:968
#, c-format
msgid "  Date %s"
msgstr "  日期 %s"

#: arscan.c:969
#, c-format
msgid "  uid = %d, gid = %d, mode = 0%o.\n"
msgstr "  uid = %d，gid = %d，mode = 0%o。\n"

#: commands.c:402
#, c-format
msgid "Recipe has too many lines (%ud)"
msgstr "命令配方行数太多 (%ud)"

#: commands.c:503
msgid "*** Break.\n"
msgstr "*** 中断。\n"

#: commands.c:627
#, c-format
msgid "*** [%s] Archive member '%s' may be bogus; not deleted"
msgstr "*** [%s] 归档成员“%s”可能是假的；未删除"

# 是化学的成分，是特技！
#: commands.c:631
#, c-format
msgid "*** Archive member '%s' may be bogus; not deleted"
msgstr "*** 归档成员“%s”可能是假的；未删除"

#: commands.c:645
#, c-format
msgid "*** [%s] Deleting file '%s'"
msgstr "*** [%s] 正在删除文件“%s”"

#: commands.c:647
#, c-format
msgid "*** Deleting file '%s'"
msgstr "*** 正在删除文件“%s”"

#: commands.c:683
msgid "#  recipe to execute"
msgstr "#  要执行的配方"

#: commands.c:686
msgid " (built-in):"
msgstr " (内置)："

#: commands.c:688
#, c-format
msgid " (from '%s', line %lu):\n"
msgstr " (从“%s”，行 %lu)：\n"

#: dir.c:1069
msgid ""
"\n"
"# Directories\n"
msgstr ""
"\n"
"# 目录\n"

#: dir.c:1081
#, c-format
msgid "# %s: could not be stat'd.\n"
msgstr "# %s：无法对其进行 stat 操作。\n"

#: dir.c:1085
msgid "# %s (key %s, mtime %I64u): could not be opened.\n"
msgstr "# %s (关键字 %s，修改时间 %I64u)：无法打开。\n"

#: dir.c:1090
#, c-format
msgid "# %s (device %d, inode [%d,%d,%d]): could not be opened.\n"
msgstr "# %s (设备 %d，i-节点 [%d,%d,%d])：无法打开。\n"

#: dir.c:1095
#, c-format
msgid "# %s (device %ld, inode %ld): could not be opened.\n"
msgstr "# %s (设备 %ld，i-节点 %ld)：无法打开。\n"

#: dir.c:1122
msgid "# %s (key %s, mtime %I64u): "
msgstr "# %s (关键字 %s，修改时间 %I64u)："

#: dir.c:1127
#, c-format
msgid "# %s (device %d, inode [%d,%d,%d]): "
msgstr "# %s (设备 %d，i-节点 [%d,%d,%d])："

#: dir.c:1132
#, c-format
msgid "# %s (device %ld, inode %ld): "
msgstr "# %s (设备 %ld，i-节点 %ld)："

#: dir.c:1138 dir.c:1159
msgid "No"
msgstr "无"

#: dir.c:1141 dir.c:1162
msgid " files, "
msgstr " 文件， "

#: dir.c:1143 dir.c:1164
msgid "no"
msgstr "无"

#: dir.c:1146
msgid " impossibilities"
msgstr " 不可能"

#: dir.c:1150
msgid " so far."
msgstr " 迄今为止。"

#: dir.c:1167
#, c-format
msgid " impossibilities in %lu directories.\n"
msgstr " 不可能在 %lu 目录中。\n"

#: expand.c:125
#, c-format
msgid "Recursive variable '%s' references itself (eventually)"
msgstr "递归变量“%s”（最终将会）引用自身"

#: expand.c:271
msgid "unterminated variable reference"
msgstr "未终止的变量引用"

#: file.c:278
#, c-format
msgid "Recipe was specified for file '%s' at %s:%lu,"
msgstr "关于文件“%s”的命令配方在 %s:%lu 处指定，"

#: file.c:283
#, c-format
msgid "Recipe for file '%s' was found by implicit rule search,"
msgstr "关于文件“%s”的命令配方通过隐含规则搜索而找到，"

#: file.c:287
#, c-format
msgid "but '%s' is now considered the same file as '%s'."
msgstr "但“%s”现在被看做“%s”的同一个文件。"

#: file.c:290
#, c-format
msgid "Recipe for '%s' will be ignored in favor of the one for '%s'."
msgstr "“%s”的命令配方被忽略，转而使用“%s”的"

#: file.c:310
#, c-format
msgid "can't rename single-colon '%s' to double-colon '%s'"
msgstr "无法将单冒号“%s”重命名为双冒号“%s”"

#: file.c:316
#, c-format
msgid "can't rename double-colon '%s' to single-colon '%s'"
msgstr "无法将双冒号“%s”重命名为单冒号“%s”"

#: file.c:408
#, c-format
msgid "*** Deleting intermediate file '%s'"
msgstr "*** 正在删除中间文件“%s”"

#: file.c:412
msgid "Removing intermediate files...\n"
msgstr "正在删除中间文件...\n"

#: file.c:818
msgid "Current time"
msgstr "当前时间"

#: file.c:822
#, c-format
msgid "%s: Timestamp out of range; substituting %s"
msgstr "%s：时间标记超出范围；正在替换 %s"

#: file.c:962
msgid "# Not a target:"
msgstr "# 不是一个目标："

#: file.c:967
msgid "#  Precious file (prerequisite of .PRECIOUS)."
msgstr "#  重要文件 (.PRECIOUS的前提)。"

#: file.c:969
msgid "#  Phony target (prerequisite of .PHONY)."
msgstr "#  假目标 (.PHONY的前提)。"

#: file.c:971
msgid "#  Command line target."
msgstr "#  命令行目标。"

#: file.c:973
msgid "#  A default, MAKEFILES, or -include/sinclude makefile."
msgstr "#  缺省的、MAKEFILES 指定的、-include/sinclude 包含的 makefile。"

#: file.c:975
msgid "#  Builtin rule"
msgstr "#  内建规则"

#: file.c:977
msgid "#  Implicit rule search has been done."
msgstr "#  对隐含规则的搜索已完成。"

#: file.c:978
msgid "#  Implicit rule search has not been done."
msgstr "#  对隐含规则的搜索尚未完成。"

#: file.c:980
#, c-format
msgid "#  Implicit/static pattern stem: '%s'\n"
msgstr "#  隐含/静态模式主干：“%s”\n"

#: file.c:982
msgid "#  File is an intermediate prerequisite."
msgstr "#  文件是一个中间前提。"

#: file.c:986
msgid "#  Also makes:"
msgstr "#  还要制作："

#: file.c:992
msgid "#  Modification time never checked."
msgstr "#  从不检查修改时间。"

#: file.c:994
msgid "#  File does not exist."
msgstr "#  文件不存在。"

#: file.c:996
msgid "#  File is very old."
msgstr "#  文件非常陈旧。"

#: file.c:1001
#, c-format
msgid "#  Last modified %s\n"
msgstr "#  最近更新 %s\n"

#: file.c:1004
msgid "#  File has been updated."
msgstr "#  文件已经被更新。"

#: file.c:1004
msgid "#  File has not been updated."
msgstr "#  文件尚未被更新。"

#: file.c:1008
msgid "#  Recipe currently running (THIS IS A BUG)."
msgstr "#  正在运行的配方 (这是 BUG)。"

#: file.c:1011
msgid "#  Dependencies recipe running (THIS IS A BUG)."
msgstr "#  正在运行的依赖性配方 (这是 BUG)。"

#: file.c:1020
msgid "#  Successfully updated."
msgstr "#  更新成功。"

#: file.c:1024
msgid "#  Needs to be updated (-q is set)."
msgstr "#  需要更新 (用 -q 设定)。"

#: file.c:1027
msgid "#  Failed to be updated."
msgstr "#  更新失败。"

#: file.c:1032
msgid "#  Invalid value in 'command_state' member!"
msgstr "#  “command_state”成员中存在无效的值！"

#: file.c:1051
msgid ""
"\n"
"# Files"
msgstr ""
"\n"
"# 文件"

#: file.c:1055
msgid ""
"\n"
"# files hash-table stats:\n"
"# "
msgstr ""
"\n"
"# 文件杂凑表状态:\n"
"# "

#: file.c:1065
#, c-format
msgid "%s: Field '%s' not cached: %s"
msgstr "%s：字段“%s”未被缓存：%s"

#: function.c:790
msgid "non-numeric first argument to 'word' function"
msgstr "“word”函数的第一个参数不是数字"

#: function.c:795
msgid "first argument to 'word' function must be greater than 0"
msgstr "“word”函数的第一个参数必须大于 0"

#: function.c:815
msgid "non-numeric first argument to 'wordlist' function"
msgstr "“wordlist”函数的第一个参数不是数字"

#: function.c:817
msgid "non-numeric second argument to 'wordlist' function"
msgstr "“wordlist”函数的第二个参数不是数字"

# 程序员的函数名提示，还是不要动吧。
#: function.c:1525
#, c-format
msgid "windows32_openpipe: DuplicateHandle(In) failed (e=%ld)\n"
msgstr "windows32_openpipe: DuplicateHandle(In) 失败 (e=%ld)\n"

#: function.c:1549
#, c-format
msgid "windows32_openpipe: DuplicateHandle(Err) failed (e=%ld)\n"
msgstr "windows32_openpipe: DuplicateHandle(Err) 失败 (e=%ld)\n"

#: function.c:1556
#, c-format
msgid "CreatePipe() failed (e=%ld)\n"
msgstr "CreatePipe() 失败 (e=%ld)\n"

#: function.c:1564
msgid "windows32_openpipe(): process_init_fd() failed\n"
msgstr "windows32_openpipe(): process_init_fd() 失败\n"

#: function.c:1858
#, c-format
msgid "Cleaning up temporary batch file %s\n"
msgstr "正在清除临时批处理文件 %s\n"

#: function.c:2215 function.c:2240
msgid "file: missing filename"
msgstr "file：缺少文件名"

#: function.c:2219 function.c:2250
#, c-format
msgid "open: %s: %s"
msgstr "open: %s: %s"

#: function.c:2227
#, c-format
msgid "write: %s: %s"
msgstr "write: %s: %s"

#: function.c:2230 function.c:2267
#, c-format
msgid "close: %s: %s"
msgstr "close：%s：%s"

#: function.c:2243
msgid "file: too many arguments"
msgstr "file：太多参数"

#: function.c:2262
#, c-format
msgid "read: %s: %s"
msgstr "read：%s：%s"

#: function.c:2275
#, c-format
msgid "file: invalid file operation: %s"
msgstr "file：无效文件（file）操作：%s"

#: function.c:2390
#, c-format
msgid "insufficient number of arguments (%d) to function '%s'"
msgstr "函数“%2$s”的参数数量 (%1$d) 不够"

#: function.c:2402
#, c-format
msgid "unimplemented on this platform: function '%s'"
msgstr "在本平台上未实现：函数“%s”"

#: function.c:2466
#, c-format
msgid "unterminated call to function '%s': missing '%c'"
msgstr "对函数“%s”的未终止的调用：遗漏“%c”"

#: function.c:2650
msgid "Empty function name"
msgstr "空函数名"

#: function.c:2652
#, c-format
msgid "Invalid function name: %s"
msgstr "无效的函数名称：%s"

#: function.c:2654
#, c-format
msgid "Function name too long: %s"
msgstr "函数名称太长：%s"

#: function.c:2657
#, c-format
msgid "Invalid minimum argument count (%u) for function %s"
msgstr "函数“%2$s”的最少参数数量 (%1$u) 无效"

#: function.c:2660
#, c-format
msgid "Invalid maximum argument count (%u) for function %s"
msgstr "函数“%2$s”的最多参数数量 (%1$u) 无效"

#: getopt.c:659
#, c-format
msgid "%s: option '%s' is ambiguous\n"
msgstr "%s：选项“%s”含义不清\n"

#: getopt.c:683
#, c-format
msgid "%s: option '--%s' doesn't allow an argument\n"
msgstr "%s：选项“--%s”不允许参数\n"

#: getopt.c:688
#, c-format
msgid "%s: option '%c%s' doesn't allow an argument\n"
msgstr "%s：选项“%c%s”不允许参数\n"

#: getopt.c:705 getopt.c:878
#, c-format
msgid "%s: option '%s' requires an argument\n"
msgstr "%s：选项“%s”需要一个参数\n"

#: getopt.c:734
#, c-format
msgid "%s: unrecognized option '--%s'\n"
msgstr "%s：无法识别的选项“--%s”\n"

#: getopt.c:738
#, c-format
msgid "%s: unrecognized option '%c%s'\n"
msgstr "%s：无法识别的选项“%c%s”\n"

#: getopt.c:764
#, c-format
msgid "%s: illegal option -- %c\n"
msgstr "%s：非法选项 -- %c\n"

#: getopt.c:767
#, c-format
msgid "%s: invalid option -- %c\n"
msgstr "%s：非法选项 -- %c\n"

#: getopt.c:797 getopt.c:927
#, c-format
msgid "%s: option requires an argument -- %c\n"
msgstr "%s：选项需要一个参数 -- %c\n"

#: getopt.c:844
#, c-format
msgid "%s: option '-W %s' is ambiguous\n"
msgstr "%s：选项“-W %s”含义不清\n"

#: getopt.c:862
#, c-format
msgid "%s: option '-W %s' doesn't allow an argument\n"
msgstr "%s：选项“-W %s”不允许给出参数\n"

#: guile.c:58
#, c-format
msgid "guile: Expanding '%s'\n"
msgstr "guile: 正拓展 '%s'\n"

#: guile.c:74
#, c-format
msgid "guile: Evaluating '%s'\n"
msgstr "guile: 正求值 '%s'\n"

#: hash.c:49
#, c-format
msgid "can't allocate %lu bytes for hash table: memory exhausted"
msgstr "无法为杂凑表分配 %lu 字节: 内存耗尽"

#: hash.c:280
#, c-format
msgid "Load=%ld/%ld=%.0f%%, "
msgstr "负载=%ld/%ld=%.0f%%, "

#: hash.c:282
#, c-format
msgid "Rehash=%d, "
msgstr "重新杂凑=%d, "

#: hash.c:283
#, c-format
msgid "Collisions=%ld/%ld=%.0f%%"
msgstr "碰撞=%ld/%ld=%.0f%%"

#: implicit.c:38
#, c-format
msgid "Looking for an implicit rule for '%s'.\n"
msgstr "正在为“%s”寻找隐含规则。\n"

#: implicit.c:54
#, c-format
msgid "Looking for archive-member implicit rule for '%s'.\n"
msgstr "正在为“%s”寻找归档成员隐含规则。\n"

#: implicit.c:311
msgid "Avoiding implicit rule recursion.\n"
msgstr "避免隐含规则递归。\n"

#: implicit.c:486
#, c-format
msgid "Stem too long: '%.*s'.\n"
msgstr "主干太长：'%.*s'.\n"

#: implicit.c:491
#, c-format
msgid "Trying pattern rule with stem '%.*s'.\n"
msgstr "用主干“%.*s”尝试匹配模式规则。\n"

#: implicit.c:697
#, c-format
msgid "Rejecting impossible rule prerequisite '%s'.\n"
msgstr "拒绝不可能的规则前提“%s”。\n"

#: implicit.c:698
#, c-format
msgid "Rejecting impossible implicit prerequisite '%s'.\n"
msgstr "拒绝不可能的隐含前提“%s”。\n"

#: implicit.c:711
#, c-format
msgid "Trying rule prerequisite '%s'.\n"
msgstr "尝试规则前提“%s”。\n"

#: implicit.c:712
#, c-format
msgid "Trying implicit prerequisite '%s'.\n"
msgstr "尝试隐含前提“%s”。\n"

#: implicit.c:751
#, c-format
msgid "Found prerequisite '%s' as VPATH '%s'\n"
msgstr "前提“%s”在 VPATH“%s”中发现\n"

#: implicit.c:765
#, c-format
msgid "Looking for a rule with intermediate file '%s'.\n"
msgstr "正在寻找包含中间文件“%s”的规则。\n"

#: job.c:363
msgid "Cannot create a temporary file\n"
msgstr "无法创建临时文件\n"

#: job.c:485
msgid " (core dumped)"
msgstr " (core dumped)"

#: job.c:490
msgid " (ignored)"
msgstr " (已忽略）"

#: job.c:494 job.c:1828
msgid "<builtin>"
msgstr "<内置>"

#: job.c:510
#, c-format
msgid "%s[%s: %s] Error %d%s"
msgstr "%s[%s：%s] 错误 %d%s"

#: job.c:599
msgid "*** Waiting for unfinished jobs...."
msgstr "*** 正在等待未完成的任务...."

#: job.c:629
#, c-format
msgid "Live child %p (%s) PID %s %s\n"
msgstr "活跃子进程 %p (%s) PID %s %s\n"

#: job.c:631 job.c:833 job.c:952 job.c:1583
msgid " (remote)"
msgstr " (远程)"

#: job.c:831
#, c-format
msgid "Reaping losing child %p PID %s %s\n"
msgstr "正在中止失败的子进程 %p PID %s %s\n"

#: job.c:832
#, c-format
msgid "Reaping winning child %p PID %s %s\n"
msgstr "正在中止获胜的子进程 %p PID %s %s\n"

#: job.c:839
#, c-format
msgid "Cleaning up temp batch file %s\n"
msgstr "正在清除临时批文件 %s\n"

#: job.c:845
#, c-format
msgid "Cleaning up temp batch file %s failed (%d)\n"
msgstr "清理临时批处理文件 %s 失败 (%d)\n"

#: job.c:951
#, c-format
msgid "Removing child %p PID %s%s from chain.\n"
msgstr "从链中删除子进程 %p PID %s%s。\n"

#: job.c:1006
#, c-format
msgid "Released token for child %p (%s).\n"
msgstr "为子进程 %p (%s) 释放令牌 (token)。\n"

#: job.c:1508 job.c:2201
#, c-format
msgid "process_easy() failed to launch process (e=%ld)\n"
msgstr "process_easy() 启动进程失败 (e=%ld)\n"

#: job.c:1512 job.c:2205
#, c-format
msgid ""
"\n"
"Counted %d args in failed launch\n"
msgstr ""
"\n"
"失败执行中共有 %d 个参数。\n"

#: job.c:1581
#, c-format
msgid "Putting child %p (%s) PID %s%s on the chain.\n"
msgstr "将子进程 %p (%s) PID %s%s 放入链。\n"

#: job.c:1811
#, c-format
msgid "Obtained token for child %p (%s).\n"
msgstr "获得至进程 %p (%s) 的标记。\n"

#: job.c:1838
#, c-format
msgid "%s: target '%s' does not exist"
msgstr "%s: 目标文件“%s”不存在"

#: job.c:1841
#, c-format
msgid "%s: update target '%s' due to: %s"
msgstr "%s：更新“%s”，因为：%s"

#: job.c:1956
msgid "cannot enforce load limits on this operating system"
msgstr "无法在本操作系统中实施负载限制"

#: job.c:1958
msgid "cannot enforce load limit: "
msgstr "无法实施负载限制："

#: job.c:2048
msgid "no more file handles: could not duplicate stdin\n"
msgstr "没有剩余的文件句柄: 无法复制标准输入\n"

#: job.c:2060
msgid "no more file handles: could not duplicate stdout\n"
msgstr "没有剩余的文件句柄: 无法复制标准输出\n"

#: job.c:2074
msgid "no more file handles: could not duplicate stderr\n"
msgstr "没有剩余的文件句柄: 无法复制标准错误\n"

#: job.c:2089
msgid "Could not restore stdin\n"
msgstr "无法还原标准输入\n"

#: job.c:2097
msgid "Could not restore stdout\n"
msgstr "无法还原标准输出\n"

#: job.c:2105
msgid "Could not restore stderr\n"
msgstr "无法还原标准错误\n"

#: job.c:2234
#, c-format
msgid "make reaped child pid %s, still waiting for pid %s\n"
msgstr "make 已中止的子进程 pid %s，仍在等待 pid %s\n"

#: job.c:2275
#, c-format
msgid "%s: %s: Command not found\n"
msgstr "%s：%s：命令未找到\n"

#: job.c:2277
#, c-format
msgid "%s[%u]: %s: Command not found\n"
msgstr "%s[%u]：%s：命令未找到\n"

#: job.c:2337
#, c-format
msgid "%s: Shell program not found"
msgstr "%s：未找到 shell 程序"

#: job.c:2346
msgid "spawnvpe: environment space might be exhausted"
msgstr "spawnvpe: 环境变量空间可能会耗尽"

#: job.c:2584
#, c-format
msgid "$SHELL changed (was '%s', now '%s')\n"
msgstr "$SHELL 已改变 (原为“%s”，现为“%s”)\n"

#: job.c:3022 job.c:3207
#, c-format
msgid "Creating temporary batch file %s\n"
msgstr "正在创建临时批文件 %s\n"

#: job.c:3030
msgid ""
"Batch file contents:\n"
"\t@echo off\n"
msgstr ""
"批处理文件内容：\n"
"\t@echo off\n"

#: job.c:3219
#, c-format
msgid ""
"Batch file contents:%s\n"
"\t%s\n"
msgstr ""
"批处理文件内容：%s\n"
"\t%s\n"

#: job.c:3327
#, c-format
msgid "%s (line %d) Bad shell context (!unixy && !batch_mode_shell)\n"
msgstr "%s (行 %d) 错误的 shell 上下文 (!unixy && !batch_mode_shell)\n"

#: job.h:43
msgid "-O[TYPE] (--output-sync[=TYPE]) is not configured for this build."
msgstr "-O[类型] (--output-sync[=类型]) 并未配置入此 make 构建。"

#: load.c:60
#, c-format
msgid "Failed to open global symbol table: %s"
msgstr "打开全局符号表失败：%s"

#: load.c:97
#, c-format
msgid "Loaded object %s is not declared to be GPL compatible"
msgstr "已加载的对象 %s 未声明为 GPL 兼容"

#: load.c:104
#, c-format
msgid "Failed to load symbol %s from %s: %s"
msgstr "从 %2$s 加载符号 %1$s 失败：%3$s"

#: load.c:149
#, c-format
msgid "Empty symbol name for load: %s"
msgstr "要加载的符号名为空：%s"

#: load.c:204
#, c-format
msgid "Loading symbol %s from %s\n"
msgstr "正从 %2$s 加载符号 %1$s\n"

#: load.c:256
msgid "The 'load' operation is not supported on this platform."
msgstr "本平台不支持“load”操作。"

#: main.c:338
msgid "Options:\n"
msgstr "选项：\n"

#: main.c:339
msgid "  -b, -m                      Ignored for compatibility.\n"
msgstr "  -b, -m                      为兼容性而忽略。\n"

#: main.c:341
msgid "  -B, --always-make           Unconditionally make all targets.\n"
msgstr "  -B, --always-make           无条件制作 (make) 所有目标。\n"

#: main.c:343
msgid ""
"  -C DIRECTORY, --directory=DIRECTORY\n"
"                              Change to DIRECTORY before doing anything.\n"
msgstr "  -C 目录, --directory=目录    在执行前先切换到 <目录>。\n"

#: main.c:346
msgid "  -d                          Print lots of debugging information.\n"
msgstr "  -d                          打印大量调试信息。\n"

#: main.c:348
msgid "  --debug[=FLAGS]             Print various types of debugging information.\n"
msgstr "  --debug[=旗标]               打印各种调试信息。\n"

#: main.c:350
msgid ""
"  -e, --environment-overrides\n"
"                              Environment variables override makefiles.\n"
msgstr ""
"  -e, --environment-overrides\n"
"                              环境变量覆盖 makefile 中的变量。\n"

#: main.c:353
msgid "  --eval=STRING               Evaluate STRING as a makefile statement.\n"
msgstr "  --eval=字串               将 <字串> 作为 makefile 语句估值。\n"

#: main.c:355
msgid ""
"  -f FILE, --file=FILE, --makefile=FILE\n"
"                              Read FILE as a makefile.\n"
msgstr ""
"  -f 文件, --file=文件, --makefile=文件\n"
"                              从 <文件> 中读入 makefile。\n"

#: main.c:358
msgid "  -h, --help                  Print this message and exit.\n"
msgstr "  -h, --help                  打印该消息并退出。\n"

#: main.c:360
msgid "  -i, --ignore-errors         Ignore errors from recipes.\n"
msgstr "  -i, --ignore-errors         忽略来自命令配方的错误。\n"

#: main.c:362
msgid ""
"  -I DIRECTORY, --include-dir=DIRECTORY\n"
"                              Search DIRECTORY for included makefiles.\n"
msgstr "  -I 目录, --include-dir=目录  在 <目录> 中搜索被包含的 makefile。\n"

#: main.c:365
msgid "  -j [N], --jobs[=N]          Allow N jobs at once; infinite jobs with no arg.\n"
msgstr "  -j [N], --jobs[=N]          同时允许 N 个任务；无参数表明允许无限个任务。\n"

#: main.c:367
msgid "  -k, --keep-going            Keep going when some targets can't be made.\n"
msgstr "  -k, --keep-going            当某些目标无法制作时仍然继续。\n"

#: main.c:369
msgid ""
"  -l [N], --load-average[=N], --max-load[=N]\n"
"                              Don't start multiple jobs unless load is below N.\n"
msgstr ""
"  -l [N], --load-average[=N], --max-load[=N]\n"
"                              在系统负载高于 N 时不启动多任务。\n"

#: main.c:372
msgid "  -L, --check-symlink-times   Use the latest mtime between symlinks and target.\n"
msgstr "  -L, --check-symlink-times   使用软链接及软链接目标中修改时间较晚的一个。\n"

#: main.c:374
msgid ""
"  -n, --just-print, --dry-run, --recon\n"
"                              Don't actually run any recipe; just print them.\n"
msgstr ""
"  -n, --just-print, --dry-run, --recon\n"
"                              只打印命令配方，不实际执行。\n"

#: main.c:377
msgid ""
"  -o FILE, --old-file=FILE, --assume-old=FILE\n"
"                              Consider FILE to be very old and don't remake it.\n"
msgstr ""
"  -o 文件, --old-file=文件, --assume-old=文件\n"
"                              将 <文件> 当做很旧，不必重新制作。\n"

#: main.c:380
msgid ""
"  -O[TYPE], --output-sync[=TYPE]\n"
"                              Synchronize output of parallel jobs by TYPE.\n"
msgstr ""
"  -O[类型], --output-sync[=类型]\n"
"                           使用 <类型> 方式同步并行任务输出。\n"

#: main.c:383
msgid "  -p, --print-data-base       Print make's internal database.\n"
msgstr "  -p, --print-data-base       打印 make 的内部数据库。\n"

#: main.c:385
msgid "  -q, --question              Run no recipe; exit status says if up to date.\n"
msgstr "  -q, --question              不运行任何配方；退出状态说明是否已全部更新。\n"

#: main.c:387
msgid "  -r, --no-builtin-rules      Disable the built-in implicit rules.\n"
msgstr "  -r, --no-builtin-rules      禁用内置隐含规则。\n"

#: main.c:389
msgid "  -R, --no-builtin-variables  Disable the built-in variable settings.\n"
msgstr "  -R, --no-builtin-variables  禁用内置变量设置。\n"

#: main.c:391
msgid "  -s, --silent, --quiet       Don't echo recipes.\n"
msgstr "  -s, --silent, --quiet       不输出配方命令。\n"

#: main.c:393
msgid ""
"  -S, --no-keep-going, --stop\n"
"                              Turns off -k.\n"
msgstr ""
"  -S, --no-keep-going, --stop\n"
"                              关闭 -k。\n"

#: main.c:396
msgid "  -t, --touch                 Touch targets instead of remaking them.\n"
msgstr "  -t, --touch                 touch 目标（更新修改时间）而不是重新制作它们。\n"

#: main.c:398
msgid "  --trace                     Print tracing information.\n"
msgstr "  --trace                     打印跟踪信息。\n"

#: main.c:400
msgid "  -v, --version               Print the version number of make and exit.\n"
msgstr "  -v, --version               打印 make 的版本号并退出。\n"

#: main.c:402
msgid "  -w, --print-directory       Print the current directory.\n"
msgstr "  -w, --print-directory       打印当前目录。\n"

#: main.c:404
msgid "  --no-print-directory        Turn off -w, even if it was turned on implicitly.\n"
msgstr "  --no-print-directory        关闭 -w，即使 -w 默认开启。\n"

#: main.c:406
msgid ""
"  -W FILE, --what-if=FILE, --new-file=FILE, --assume-new=FILE\n"
"                              Consider FILE to be infinitely new.\n"
msgstr ""
"  -W 文件, --what-if=文件, --new-file=文件, --assume-new=文件\n"
"                              将 <文件> 当做最新。\n"

#: main.c:409
msgid "  --warn-undefined-variables  Warn when an undefined variable is referenced.\n"
msgstr "  --warn-undefined-variables  当引用未定义变量的时候发出警告。\n"

#: main.c:683
msgid "empty string invalid as file name"
msgstr "空字符串是无效的文件名"

#: main.c:766
#, c-format
msgid "unknown debug level specification '%s'"
msgstr "未知的调试级别定义“%s”"

#: main.c:806
#, c-format
msgid "unknown output-sync type '%s'"
msgstr "不明输出同步类型“%s”"

#: main.c:861
#, c-format
msgid "%s: Interrupt/Exception caught (code = 0x%lx, addr = 0x%p)\n"
msgstr "%s：捕获中断/异常 (代码 = 0x%lx, 地址 = 0x%p)\n"

#: main.c:868
#, c-format
msgid ""
"\n"
"Unhandled exception filter called from program %s\n"
"ExceptionCode = %lx\n"
"ExceptionFlags = %lx\n"
"ExceptionAddress = 0x%p\n"
msgstr ""
"\n"
"从程序 %s 产生的未处理的异常过滤器\n"
"异常码 = %lx\n"
"异常标志 = %lx\n"
"异常地址 = 0x%p\n"

#: main.c:876
#, c-format
msgid "Access violation: write operation at address 0x%p\n"
msgstr "访问冲突：地址 0x%p 处的写操作\n"

#: main.c:877
#, c-format
msgid "Access violation: read operation at address 0x%p\n"
msgstr "访问冲突：地址 0x%p 处的读操作\n"

#: main.c:953 main.c:968
#, c-format
msgid "find_and_set_shell() setting default_shell = %s\n"
msgstr "find_and_set_shell() 设置 default_shell = %s\n"

#: main.c:1021
#, c-format
msgid "find_and_set_shell() path search set default_shell = %s\n"
msgstr "find_and_set_shell() 路径搜索结果设置 default_shell = %s\n"

#: main.c:1538
#, c-format
msgid "%s is suspending for 30 seconds..."
msgstr "%s 正在挂起 30 秒..."

#: main.c:1540
#, c-format
msgid "done sleep(30). Continuing.\n"
msgstr "睡眠完成(30)。继续。\n"

#: main.c:1627
msgid "warning: jobserver unavailable: using -j1.  Add '+' to parent make rule."
msgstr "警告: jobserver 不可用: 正使用 -j1。添加 “+” 到父 make 的规则。"

#: main.c:1635
msgid "warning: -jN forced in submake: disabling jobserver mode."
msgstr "警告: 子 make 中强制 -jN: 关闭 jobserver 模式。"

#: main.c:1805
msgid "Makefile from standard input specified twice."
msgstr "两次指明来自标准输入的 makefile。"

#: main.c:1843 vmsjobs.c:1252
msgid "fopen (temporary file)"
msgstr "fopen (临时文件)"

#: main.c:1849
msgid "fwrite (temporary file)"
msgstr "fwrite (临时文件)"

#: main.c:2048
msgid "Parallel jobs (-j) are not supported on this platform."
msgstr "本平台不支持并行任务 (-j)。"

#: main.c:2049
msgid "Resetting to single job (-j1) mode."
msgstr "重置为单任务模式 (-j1)。"

#: main.c:2088
msgid "Symbolic links not supported: disabling -L."
msgstr "不支持软链接: 关闭 -L"

#: main.c:2170
msgid "Updating makefiles....\n"
msgstr "正在更新 makefile....\n"

#: main.c:2195
#, c-format
msgid "Makefile '%s' might loop; not remaking it.\n"
msgstr "Makefile “%s”可能循环；不会重新执行它。\n"

#: main.c:2279
#, c-format
msgid "Failed to remake makefile '%s'."
msgstr "重新执行 makefile“%s”失败。"

#: main.c:2299
#, c-format
msgid "Included makefile '%s' was not found."
msgstr "找不到被引入的 makefile“%s”。"

#: main.c:2304
#, c-format
msgid "Makefile '%s' was not found"
msgstr "找不到 makefile “%s”。"

#: main.c:2372
msgid "Couldn't change back to original directory."
msgstr "无法回到原始目录。"

#: main.c:2380
#, c-format
msgid "Re-executing[%u]:"
msgstr "重新执行[%u]:"

#: main.c:2492
msgid "unlink (temporary file): "
msgstr "删除 (临时文件)："

#: main.c:2525
msgid ".DEFAULT_GOAL contains more than one target"
msgstr ".DEFAULT_GOAL 包含多余一个目标"

#: main.c:2548
msgid "No targets specified and no makefile found"
msgstr "没有指明目标并且找不到 makefile"

#: main.c:2550
msgid "No targets"
msgstr "无目标"

#: main.c:2555
msgid "Updating goal targets....\n"
msgstr "更新目标....\n"

#: main.c:2579
msgid "warning:  Clock skew detected.  Your build may be incomplete."
msgstr "警告：检测到时钟错误。您的构建版本可能是不完整的。"

#: main.c:2773
#, c-format
msgid "Usage: %s [options] [target] ...\n"
msgstr "用法：%s [选项] [目标] ...\n"

#: main.c:2779
#, c-format
msgid ""
"\n"
"This program built for %s\n"
msgstr ""
"\n"
"该程序为 %s 编译\n"

#: main.c:2781
#, c-format
msgid ""
"\n"
"This program built for %s (%s)\n"
msgstr ""
"\n"
"该程序为 %s (%s) 编译\n"

#: main.c:2784
#, c-format
msgid "Report bugs to <bug-make@gnu.org>\n"
msgstr "报告错误到 <bug-make@gnu.org>\n"

#: main.c:2870
#, c-format
msgid "the '%s%s' option requires a non-empty string argument"
msgstr "“%s%s”选项需要非空字符串参数"

#: main.c:2934
#, c-format
msgid "the '-%c' option requires a positive integer argument"
msgstr "“-%c”选项需要正整数参数"

#: main.c:3332
#, c-format
msgid "%sBuilt for %s\n"
msgstr "%s为 %s 编译\n"

#: main.c:3334
#, c-format
msgid "%sBuilt for %s (%s)\n"
msgstr "%s为 %s (%s) 编译\n"

#: main.c:3345
#, c-format
msgid ""
"%sLicense GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>\n"
"%sThis is free software: you are free to change and redistribute it.\n"
"%sThere is NO WARRANTY, to the extent permitted by law.\n"
msgstr ""
"%s许可证：GPLv3+：GNU 通用公共许可证第 3 版或更新版本<http://gnu.org/licenses/gpl.html>。\n"
"%s本软件是自由软件：您可以自由修改和重新发布它。\n"
"%s在法律允许的范围内没有其他保证。\n"

#: main.c:3366
#, c-format
msgid ""
"\n"
"# Make data base, printed on %s"
msgstr ""
"\n"
"# make 数据基础，打印在 %s"

#: main.c:3376
#, c-format
msgid ""
"\n"
"# Finished Make data base on %s\n"
msgstr ""
"\n"
"# 在 %s 上完成 make 数据基础\n"

#: misc.c:202
#, c-format
msgid "Unknown error %d"
msgstr "未知错误 %d"

#: misc.c:508
#, c-format
msgid "%s: user %lu (real %lu), group %lu (real %lu)\n"
msgstr "%s: 用户 %lu (真实用户 %lu), 组 %lu (真实组 %lu)\n"

#: misc.c:529
msgid "Initialized access"
msgstr "初始化成功"

#: misc.c:608
msgid "User access"
msgstr "用户权限"

#: misc.c:656
msgid "Make access"
msgstr "Make 权限"

#: misc.c:690
msgid "Child access"
msgstr "子进程 权限"

#: output.c:104
#, c-format
msgid "%s: Entering an unknown directory\n"
msgstr "%s: 进入一个未知的目录\n"

#: output.c:106
#, c-format
msgid "%s: Leaving an unknown directory\n"
msgstr "%s: 离开一个未知的目录\n"

#: output.c:109
#, c-format
msgid "%s: Entering directory '%s'\n"
msgstr "%s: 进入目录“%s”\n"

#: output.c:111
#, c-format
msgid "%s: Leaving directory '%s'\n"
msgstr "%s: 离开目录“%s”\n"

#: output.c:115
#, c-format
msgid "%s[%u]: Entering an unknown directory\n"
msgstr "%s[%u]: 进入一个未知的目录\n"

#: output.c:117
#, c-format
msgid "%s[%u]: Leaving an unknown directory\n"
msgstr "%s[%u]: 离开一个未知的目录\n"

#: output.c:120
#, c-format
msgid "%s[%u]: Entering directory '%s'\n"
msgstr "%s[%u]: 进入目录“%s”\n"

#: output.c:122
#, c-format
msgid "%s[%u]: Leaving directory '%s'\n"
msgstr "%s[%u]: 离开目录“%s”\n"

#: output.c:495 output.c:497
msgid "write error: stdout"
msgstr "写错误: 标准输出"

#: output.c:677
msgid ".  Stop.\n"
msgstr "。 停止。\n"

#: output.c:711
#, c-format
msgid "%s%s: %s"
msgstr "%s%s: %s"

#: output.c:720
#, c-format
msgid "%s: %s"
msgstr "%s: %s"

#: posixos.c:69
msgid "creating jobs pipe"
msgstr "正在创建任务管道"

#: posixos.c:72 posixos.c:227
msgid "duping jobs pipe"
msgstr "正在复制任务管道"

#: posixos.c:78
msgid "init jobserver pipe"
msgstr "创始化任务服务器管道"

#: posixos.c:90
#, c-format
msgid "internal error: invalid --jobserver-auth string '%s'"
msgstr "内部错误：非法 --jobserver-auth 验证字符串“%s”"

#: posixos.c:93
#, c-format
msgid "Jobserver client (fds %d,%d)\n"
msgstr "jobserver 客户端（文件描述符 %d,%d）\n"

#: posixos.c:109
msgid "jobserver pipeline"
msgstr "任务服务器管道"

#: posixos.c:154
msgid "write jobserver"
msgstr "写入任务服务器"

# , fuzzy
#: posixos.c:268
msgid "pselect jobs pipe"
msgstr "pselect 任务管道"

#: posixos.c:279 posixos.c:391
msgid "read jobs pipe"
msgstr "读取任务管道"

#: read.c:178
msgid "Reading makefiles...\n"
msgstr "正在读入 makefiles...\n"

#: read.c:329
#, c-format
msgid "Reading makefile '%s'"
msgstr "正在读入 makefile “%s”"

#: read.c:331
#, c-format
msgid " (no default goal)"
msgstr " (没有缺省目标)"

#: read.c:333
#, c-format
msgid " (search path)"
msgstr " (搜索路径)"

#: read.c:335
#, c-format
msgid " (don't care)"
msgstr " (不用理)"

#: read.c:337
#, c-format
msgid " (no ~ expansion)"
msgstr " (没有 ~ 扩展)"

#: read.c:651
#, c-format
msgid "Skipping UTF-8 BOM in makefile '%s'\n"
msgstr "跳过 Makefile“%s”中的 UTF-8 BOM\n"

#: read.c:654
#, c-format
msgid "Skipping UTF-8 BOM in makefile buffer\n"
msgstr "跳过 Makefile 缓冲区中的 UTF-8 BOM\n"

#: read.c:783
msgid "invalid syntax in conditional"
msgstr "条件中含有无效语法"

#: read.c:959
#, c-format
msgid "%s: failed to load"
msgstr "%s: 加载失败"

#: read.c:985
msgid "recipe commences before first target"
msgstr "配方在第一个目标前开始"

#: read.c:1034
msgid "missing rule before recipe"
msgstr "配方之前遗漏了规则"

#: read.c:1124
msgid "missing separator (did you mean TAB instead of 8 spaces?)"
msgstr "分隔符缺失 (你大概想用 TAB，而不是八个空格)"

#: read.c:1126
msgid "missing separator"
msgstr "遗漏分隔符 %s"

#: read.c:1262
msgid "missing target pattern"
msgstr "无目标匹配"

#: read.c:1264
msgid "multiple target patterns"
msgstr "多个目标匹配"

#: read.c:1268
#, c-format
msgid "target pattern contains no '%%'"
msgstr "目标模式不含有“%%”"

#: read.c:1390
msgid "missing 'endif'"
msgstr "遗漏“endif”"

#: read.c:1428 read.c:1473 variable.c:1576
msgid "empty variable name"
msgstr "空变量名"

#: read.c:1463
msgid "extraneous text after 'define' directive"
msgstr "“endef”指令后含有不该出现的文字"

#: read.c:1488
msgid "missing 'endef', unterminated 'define'"
msgstr "遗漏“endef”，未终止的“define”"

#: read.c:1516
msgid "extraneous text after 'endef' directive"
msgstr "“endef”指令后含有不该出现的文字"

#: read.c:1588
#, c-format
msgid "extraneous text after '%s' directive"
msgstr "在“%s”指令之后含有不该出现的文字"

#: read.c:1589
#, c-format
msgid "extraneous '%s'"
msgstr "不该出现的“%s”"

#: read.c:1617
msgid "only one 'else' per conditional"
msgstr "每个条件只能有一个“else”"

#: read.c:1892
msgid "Malformed target-specific variable definition"
msgstr "畸形的针对目标的标量定义"

#: read.c:1950
msgid "prerequisites cannot be defined in recipes"
msgstr "依赖无法在配方脚本中定义"

#: read.c:2009
msgid "mixed implicit and static pattern rules"
msgstr "混和的隐含和静态模式规则"

#: read.c:2032
msgid "mixed implicit and normal rules"
msgstr "混和的隐含和普通规则"

#: read.c:2085
#, c-format
msgid "target '%s' doesn't match the target pattern"
msgstr "目标“%s”不匹配目标模式"

#: read.c:2100 read.c:2146
#, c-format
msgid "target file '%s' has both : and :: entries"
msgstr "目标文件“%s”含有 : 和 :: 两种条目"

#: read.c:2106
#, c-format
msgid "target '%s' given more than once in the same rule"
msgstr "目标“%s”在同一个规则中给出了多次。"

#: read.c:2116
#, c-format
msgid "warning: overriding recipe for target '%s'"
msgstr "警告：覆盖关于目标“%s”的配方"

#: read.c:2119
#, c-format
msgid "warning: ignoring old recipe for target '%s'"
msgstr "警告：忽略关于目标“%s”的旧配方"

#: read.c:2223
msgid "*** mixed implicit and normal rules: deprecated syntax"
msgstr "*** 隐含和普通规则混合：已弃用的语法"

#: read.c:2542
msgid "warning: NUL character seen; rest of line ignored"
msgstr "警告：遇到了 NUL 字符；忽略行的剩余部分"

#: remake.c:226
#, c-format
msgid "Nothing to be done for '%s'."
msgstr "对“%s”无需做任何事。"

#: remake.c:227
#, c-format
msgid "'%s' is up to date."
msgstr "“%s”已是最新。"

#: remake.c:323
#, c-format
msgid "Pruning file '%s'.\n"
msgstr "正删除文件“%s”。\n"

#: remake.c:406
#, c-format
msgid "%sNo rule to make target '%s', needed by '%s'%s"
msgstr "%s没有规则可制作目标“%s”，由“%s”%s 需求"

#: remake.c:416
#, c-format
msgid "%sNo rule to make target '%s'%s"
msgstr "%s没有规则可制作目标“%s”%s"

#: remake.c:442
#, c-format
msgid "Considering target file '%s'.\n"
msgstr "正在考虑目标文件“%s”。\n"

#: remake.c:449
#, c-format
msgid "Recently tried and failed to update file '%s'.\n"
msgstr "最近已尝试过更新文件“%s”并失败。\n"

#: remake.c:461
#, c-format
msgid "File '%s' was considered already.\n"
msgstr "已考虑过文件“%s”。\n"

#: remake.c:471
#, c-format
msgid "Still updating file '%s'.\n"
msgstr "仍然在更新文件“%s”。\n"

#: remake.c:474
#, c-format
msgid "Finished updating file '%s'.\n"
msgstr "更新文件“%s”完成。\n"

#: remake.c:503
#, c-format
msgid "File '%s' does not exist.\n"
msgstr "文件“%s”不存在。\n"

#: remake.c:511
#, c-format
msgid "*** Warning: .LOW_RESOLUTION_TIME file '%s' has a high resolution time stamp"
msgstr "*** 警告: .LOW_RESOLUTION_TIME 文件 `%s' 有一个高精度的的时间标志"

#: remake.c:524 remake.c:1056
#, c-format
msgid "Found an implicit rule for '%s'.\n"
msgstr "找到一条关于“%s”的隐含规则。\n"

#: remake.c:526 remake.c:1058
#, c-format
msgid "No implicit rule found for '%s'.\n"
msgstr "找不到关于“%s”的隐含规则。\n"

#: remake.c:532
#, c-format
msgid "Using default recipe for '%s'.\n"
msgstr "使用“%s”的默认配方。\n"

#: remake.c:566 remake.c:1105
#, c-format
msgid "Circular %s <- %s dependency dropped."
msgstr "放弃循环依赖 %s <- %s 。"

#: remake.c:691
#, c-format
msgid "Finished prerequisites of target file '%s'.\n"
msgstr "目标文件“%s”的前提已完成。\n"

#: remake.c:697
#, c-format
msgid "The prerequisites of '%s' are being made.\n"
msgstr "正在制作“%s”的前提。\n"

#: remake.c:711
#, c-format
msgid "Giving up on target file '%s'.\n"
msgstr "放弃目标文件“%s”。\n"

#: remake.c:716
#, c-format
msgid "Target '%s' not remade because of errors."
msgstr "由于错误目标“%s”并未重新制作。"

#: remake.c:768
#, c-format
msgid "Prerequisite '%s' is order-only for target '%s'.\n"
msgstr "前提“%s”对目标“%s”来说仅用于指定执行顺序 (order-only) 。\n"

#: remake.c:773
#, c-format
msgid "Prerequisite '%s' of target '%s' does not exist.\n"
msgstr "目标“%2$s”的前提“%1$s”不存在。\n"

#: remake.c:778
#, c-format
msgid "Prerequisite '%s' is newer than target '%s'.\n"
msgstr "前提“%s”比目标“%s”新。\n"

#: remake.c:781
#, c-format
msgid "Prerequisite '%s' is older than target '%s'.\n"
msgstr "前提“%s”比目标“%s”旧。\n"

#: remake.c:799
#, c-format
msgid "Target '%s' is double-colon and has no prerequisites.\n"
msgstr "目标“%s”是双冒号目标并且没有前提。\n"

#: remake.c:806
#, c-format
msgid "No recipe for '%s' and no prerequisites actually changed.\n"
msgstr "没有关于“%s”的配方，并且没有实际改变的前提。\n"

#: remake.c:811
#, c-format
msgid "Making '%s' due to always-make flag.\n"
msgstr "由于 always-make 标志所以制作“%s”。\n"

#: remake.c:819
#, c-format
msgid "No need to remake target '%s'"
msgstr "不需要重新制作目标“%s”"

#: remake.c:821
#, c-format
msgid "; using VPATH name '%s'"
msgstr "；使用 VPATH 名称“%s”"

#: remake.c:841
#, c-format
msgid "Must remake target '%s'.\n"
msgstr "必须重新制作目标“%s”。\n"

#: remake.c:847
#, c-format
msgid "  Ignoring VPATH name '%s'.\n"
msgstr "  忽略 VPATH 名称“%s”。\n"

#: remake.c:856
#, c-format
msgid "Recipe of '%s' is being run.\n"
msgstr "“%s”的命令配方正在被执行。\n"

#: remake.c:863
#, c-format
msgid "Failed to remake target file '%s'.\n"
msgstr "重新制作目标文件“%s”失败。\n"

#: remake.c:866
#, c-format
msgid "Successfully remade target file '%s'.\n"
msgstr "重新制作目标文件“%s”成功。\n"

#: remake.c:869
#, c-format
msgid "Target file '%s' needs to be remade under -q.\n"
msgstr "目标文件“%s”需要以 -q 选项重新制作。\n"

#: remake.c:1064
#, c-format
msgid "Using default commands for '%s'.\n"
msgstr "使用关于“%s”的默认命令。\n"

#: remake.c:1430
#, c-format
msgid "Warning: File '%s' has modification time in the future"
msgstr "警告：文件“%s”的修改时间在未来"

#: remake.c:1444
#, c-format
msgid "Warning: File '%s' has modification time %s s in the future"
msgstr "警告：文件“%s”的修改时间在未来 %s 秒后"

#: remake.c:1647
#, c-format
msgid ".LIBPATTERNS element '%s' is not a pattern"
msgstr ".LIBPATTERNS 的元素“%s”不是一个模式"

#: remote-cstms.c:122
#, c-format
msgid "Customs won't export: %s\n"
msgstr "用户不希望导出：%s\n"

#: rule.c:496
msgid ""
"\n"
"# Implicit Rules"
msgstr ""
"\n"
"# 隐含规则"

#: rule.c:511
msgid ""
"\n"
"# No implicit rules."
msgstr ""
"\n"
"# 没有隐含规则。"

#: rule.c:514
#, c-format
msgid ""
"\n"
"# %u implicit rules, %u"
msgstr ""
"\n"
"# %u 条隐含规则，%u"

#: rule.c:523
msgid " terminal."
msgstr " 终端。"

#: rule.c:531
#, c-format
msgid "BUG: num_pattern_rules is wrong!  %u != %u"
msgstr "BUG：num_pattern_rules 出错！%u != %u"

#: signame.c:84
msgid "unknown signal"
msgstr "未知的信号"

#: signame.c:92
msgid "Hangup"
msgstr "挂起"

#: signame.c:95
msgid "Interrupt"
msgstr "中断"

#: signame.c:98
msgid "Quit"
msgstr "退出"

#: signame.c:101
msgid "Illegal Instruction"
msgstr "非法指令"

#: signame.c:104
msgid "Trace/breakpoint trap"
msgstr "跟踪/断点陷阱"

#: signame.c:109
msgid "Aborted"
msgstr "已失败"

#: signame.c:112
msgid "IOT trap"
msgstr "IOT 陷阱"

#: signame.c:115
msgid "EMT trap"
msgstr "EMT 陷阱"

#: signame.c:118
msgid "Floating point exception"
msgstr "浮点数异常"

#: signame.c:121
msgid "Killed"
msgstr "已杀死"

#: signame.c:124
msgid "Bus error"
msgstr "总线错误"

#: signame.c:127
msgid "Segmentation fault"
msgstr "段错误"

#: signame.c:130
msgid "Bad system call"
msgstr "错误的系统调用"

#: signame.c:133
msgid "Broken pipe"
msgstr "断开的管道"

#: signame.c:136
msgid "Alarm clock"
msgstr "闹钟"

#: signame.c:139
msgid "Terminated"
msgstr "已终止"

#: signame.c:142
msgid "User defined signal 1"
msgstr "用户定义信号 1"

#: signame.c:145
msgid "User defined signal 2"
msgstr "用户定义信号 2"

#: signame.c:150 signame.c:153
msgid "Child exited"
msgstr "子进程已退出"

#: signame.c:156
msgid "Power failure"
msgstr "电源失效"

#: signame.c:159
msgid "Stopped"
msgstr "已停止"

#: signame.c:162
msgid "Stopped (tty input)"
msgstr "已停止 (tty 输入)"

#: signame.c:165
msgid "Stopped (tty output)"
msgstr "已停止 (tty 输出)"

#: signame.c:168
msgid "Stopped (signal)"
msgstr "已停止 (信号)"

#: signame.c:171
msgid "CPU time limit exceeded"
msgstr "CPU 时间超出限制"

#: signame.c:174
msgid "File size limit exceeded"
msgstr "文件大小超出限制"

#: signame.c:177
msgid "Virtual timer expired"
msgstr "虚拟时钟超时"

#: signame.c:180
msgid "Profiling timer expired"
msgstr "测试时钟超市"

#: signame.c:186
msgid "Window changed"
msgstr "窗口已改变"

#: signame.c:189
msgid "Continued"
msgstr "继续"

#: signame.c:192
msgid "Urgent I/O condition"
msgstr "紧急 I/O 条件"

#: signame.c:199 signame.c:208
msgid "I/O possible"
msgstr "I/O 可行"

#: signame.c:202
msgid "SIGWIND"
msgstr "SIGWIND"

#: signame.c:205
msgid "SIGPHONE"
msgstr "SIGPHONE"

#: signame.c:211
msgid "Resource lost"
msgstr "资源丢失"

#: signame.c:214
msgid "Danger signal"
msgstr "危险信号"

#: signame.c:217
msgid "Information request"
msgstr "信息请求"

#: signame.c:220
msgid "Floating point co-processor not available"
msgstr "浮点数协处理器不可用"

#: strcache.c:274
#, c-format
msgid ""
"\n"
"%s No strcache buffers\n"
msgstr ""
"\n"
"%s 没有 strcache 缓冲区\n"

#: strcache.c:304
#, c-format
msgid ""
"\n"
"%s strcache buffers: %lu (%lu) / strings = %lu / storage = %lu B / avg = %lu B\n"
msgstr ""
"\n"
"%s strcache 缓冲: %lu (%lu) / 字串 = %lu / 空间 = %lu B / 平均 = %lu B\n"

#: strcache.c:308
#, c-format
msgid "%s current buf: size = %hu B / used = %hu B / count = %hu / avg = %hu B\n"
msgstr "%s 目前缓冲: 尺寸 = %hu B / 已用 = %hu B / 数量 = %hu / 平均 = %hu B\n"

#: strcache.c:319
#, c-format
msgid "%s other used: total = %lu B / count = %lu / avg = %lu B\n"
msgstr "%s 其他已用: 总共 = %lu B / 数量 = %lu / 平均 = %lu B\n"

#: strcache.c:322
#, c-format
msgid "%s other free: total = %lu B / max = %lu B / min = %lu B / avg = %hu B\n"
msgstr "%s 其他空余: 总共 = %lu B / 最大 = %lu B / 最小 = %lu B / 平均 = %hu B\n"

#: strcache.c:326
#, c-format
msgid ""
"\n"
"%s strcache performance: lookups = %lu / hit rate = %lu%%\n"
msgstr ""
"\n"
"%s strcache 性能：查找 = %lu / 命中率 = %lu%%\n"

#: strcache.c:328
msgid ""
"# hash-table stats:\n"
"# "
msgstr ""
"# 杂凑表统计数据:\n"
"# "

#: variable.c:1629
msgid "automatic"
msgstr "自动"

#: variable.c:1632
msgid "default"
msgstr "默认"

#: variable.c:1635
msgid "environment"
msgstr "环境"

#: variable.c:1638
msgid "makefile"
msgstr "makefile"

#: variable.c:1641
msgid "environment under -e"
msgstr "-e 指定的环境变量"

#: variable.c:1644
msgid "command line"
msgstr "命令行"

#: variable.c:1647
msgid "'override' directive"
msgstr "“override”指令"

#: variable.c:1658
#, c-format
msgid " (from '%s', line %lu)"
msgstr " (从“%s”，行 %lu)"

#: variable.c:1721
msgid "# variable set hash-table stats:\n"
msgstr "# 变量的杂凑表状态:\n"

#: variable.c:1732
msgid ""
"\n"
"# Variables\n"
msgstr ""
"\n"
"# 变量\n"

#: variable.c:1736
msgid ""
"\n"
"# Pattern-specific Variable Values"
msgstr ""
"\n"
"# Pattern-specific 变量值"

#: variable.c:1750
msgid ""
"\n"
"# No pattern-specific variable values."
msgstr ""
"\n"
"# 没有 pattern-specific 变量的值。"

#: variable.c:1752
#, c-format
msgid ""
"\n"
"# %u pattern-specific variable values"
msgstr ""
"\n"
"# %u 个 pattern-specific 变量的值"

#: variable.h:224
#, c-format
msgid "warning: undefined variable '%.*s'"
msgstr "警告：未定义的变量“%.*s”"

#: vmsfunctions.c:91
#, c-format
msgid "sys$search() failed with %d\n"
msgstr "sys$search() 失败并返回 %d\n"

#: vmsjobs.c:242
#, c-format
msgid "-warning, you may have to re-enable CTRL-Y handling from DCL.\n"
msgstr "-警告, 你可能必须从 DCL 重新启用 CTRL-Y 处理。\n"

#: vmsjobs.c:679
#, c-format
msgid "BUILTIN CD %s\n"
msgstr "BUILTIN CD %s\n"

#: vmsjobs.c:1228
#, c-format
msgid "DCL: %s\n"
msgstr "DCL：%s\n"

#: vmsjobs.c:1288
#, c-format
msgid "Append output to %s\n"
msgstr "将输出追加到 %s\n"

#: vmsjobs.c:1313
#, c-format
msgid "Append %.*s and cleanup\n"
msgstr "追加 %.*s 并清理\n"

#: vmsjobs.c:1326
#, c-format
msgid "Executing %s instead\n"
msgstr "执行 %s 作为替代\n"

#: vpath.c:603
msgid ""
"\n"
"# VPATH Search Paths\n"
msgstr ""
"\n"
"# VPATH 搜索路径\n"

#: vpath.c:620
msgid "# No 'vpath' search paths."
msgstr "# 没有“vpath”搜索路径。"

#: vpath.c:622
#, c-format
msgid ""
"\n"
"# %u 'vpath' search paths.\n"
msgstr ""
"\n"
"# %u “vpath”搜索路径。\n"

#: vpath.c:625
msgid ""
"\n"
"# No general ('VPATH' variable) search path."
msgstr ""
"\n"
"# 没有通用搜索路径(“VPATH”变量)。"

#: vpath.c:631
msgid ""
"\n"
"# General ('VPATH' variable) search path:\n"
"# "
msgstr ""
"\n"
"# 通用搜索路径(“VPATH”变量)：\n"
"# "

#: w32/w32os.c:46
#, c-format
msgid "Jobserver slots limited to %d\n"
msgstr "jobserver 槽位数限制为 %d\n"

#: w32/w32os.c:62
#, c-format
msgid "creating jobserver semaphore: (Error %ld: %s)"
msgstr "正创建 jobserver 信号量：（错误 %ld：%s）"

#: w32/w32os.c:81
#, c-format
msgid "internal error: unable to open jobserver semaphore '%s': (Error %ld: %s)"
msgstr "内部错误：无法打开 jobserver 信号量“%s”：（错误 %ld：%s）"

#: w32/w32os.c:84
#, c-format
msgid "Jobserver client (semaphore %s)\n"
msgstr "jobserver 客户端（信号量 %s）\n"

#: w32/w32os.c:125
#, c-format
msgid "release jobserver semaphore: (Error %ld: %s)"
msgstr "释放 jobserver 信号量：（错误 %ld：%s）"

#: w32/w32os.c:192
#, c-format
msgid "semaphore or child process wait: (Error %ld: %s)"
msgstr "信号量或子进程等待：(错误 %ld：%s)"

#~ msgid "%s: recipe for target '%s' failed"
#~ msgstr "%s: '%s' 的命令配方失败"

#~ msgid "%s[%s] Error 0x%x%s"
#~ msgstr "%s[%s] 错误 0x%x%s"

#~ msgid "%s[%s] %s%s%s"
#~ msgstr "%s[%s] %s%s%s"

#~ msgid "dup jobserver"
#~ msgstr "复制任务服务器"

#~ msgid "Warning: Empty redirection\n"
#~ msgstr "警告：空的重定向\n"

#~ msgid "internal error: '%s' command_state"
#~ msgstr "内部错误：“%s”command_state"

#~ msgid "BUILTIN [%s][%s]\n"
#~ msgstr "BUILTIN [%s][%s]\n"

#~ msgid "BUILTIN ECHO %s->%s\n"
#~ msgstr "BUILTIN ECHO %s->%s\n"

#~ msgid "Unknown builtin command '%s'\n"
#~ msgstr "未知的内置命令“%s”\n"

#~ msgid "Builtin command is unknown or unsupported in .ONESHELL: '%s'\n"
#~ msgstr "内置命令在 .ONESHELL 内未知或不受支持：“%s”\n"

#~ msgid "Error, empty command\n"
#~ msgstr "错误，空命令\n"

#~ msgid "Redirected input from %s\n"
#~ msgstr "来自 %s 的重定向输入\n"

#~ msgid "Redirected error to %s\n"
#~ msgstr "到 %s 的重定向错误输出\n"

#~ msgid "Redirected output to %s\n"
#~ msgstr "到 %s 的重定向输出\n"

#~ msgid "Error spawning, %d\n"
#~ msgstr "错误产生，%d\n"

#, fuzzy
#~ msgid "#  Invalid value in 'update_status' member!"
#~ msgstr "#  “update_status”成员中无效的值！"

#, fuzzy
#~ msgid "unknown trace mode '%s'"
#~ msgstr "未知的内置命令“%s”\n"

#, fuzzy
#~ msgid "internal error: multiple --sync-mutex options"
#~ msgstr "内部错误：多个 --jobserver-fds 选项"

#~ msgid "internal error: multiple --jobserver-fds options"
#~ msgstr "内部错误：多个 --jobserver-fds 选项"

#~ msgid "virtual memory exhausted"
#~ msgstr "虚拟内存耗尽"

#~ msgid "write error"
#~ msgstr "写错误"

#~ msgid "BUILTIN RM %s\n"
#~ msgstr "BUILTIN RM %s\n"

#~ msgid "*** [%s] Error 0x%x (ignored)"
#~ msgstr "*** [%s] 错误 0x%x (忽略)"

#~ msgid "process_easy() failed failed to launch process (e=%ld)\n"
#~ msgstr "process_easy() 启动进程失败 (e=%ld)\n"

#~ msgid ""
#~ "%sThis is free software; see the source for copying conditions.\n"
#~ "%sThere is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A\n"
#~ "%sPARTICULAR PURPOSE.\n"
#~ msgstr ""
#~ "%s该程序为自由软件，详情可参阅版权条款。在法律允许的范围内\n"
#~ "%s我们不作任何担保，这包含但不限于任何商业适售性以及针对特\n"
#~ "%s定目的的适用性的担保。\n"

#~ msgid "extraneous `endef'"
#~ msgstr "多于的“endef”"

#~ msgid "empty `override' directive"
#~ msgstr "空“override”指令"

#~ msgid "invalid `override' directive"
#~ msgstr "无效的“override”指令"

#~ msgid ""
#~ "\n"
#~ "%s # of strings in strcache: %d\n"
#~ msgstr ""
#~ "\n"
#~ "%s strcache 中的字符串数量: %d\n"

#~ msgid "-warning, CTRL-Y will leave sub-process(es) around.\n"
#~ msgstr "-警告, CTRL-Y 将利刀子进程环境。\n"

#~ msgid ""
#~ "\n"
#~ "# No files."
#~ msgstr ""
#~ "\n"
#~ "# 无文件。"

#~ msgid ""
#~ "\n"
#~ "# %u files in %u hash buckets.\n"
#~ msgstr ""
#~ "\n"
#~ "# 有 %u 个文件存储在 %u 个杂凑单元中。\n"

#~ msgid "# average %.3f files per bucket, max %u files in one bucket.\n"
#~ msgstr "# 每个单元平均含有 %.3f 个文件，一个单元最多含有 %u 个文件。\n"

#~ msgid "Syntax error, still inside '\"'\n"
#~ msgstr "语法错误，仍然在“\"”之中\n"

#~ msgid "Got a SIGCHLD; %u unreaped children.\n"
#~ msgstr "收到 SIGCHLD 信号；尚有 %u 个子进程存在。\n"

#~ msgid "DIRECTORY"
#~ msgstr "DIRECTORY"

#~ msgid "Change to DIRECTORY before doing anything"
#~ msgstr "在做任何事之前转移到 DIRECTORY 中"

#~ msgid "FLAGS"
#~ msgstr "标志"

#~ msgid "Suspend process to allow a debugger to attach"
#~ msgstr "挂起进程以便调试器进行连接"

#~ msgid "Environment variables override makefiles"
#~ msgstr "环境变量覆盖 makefile"

#~ msgid "FILE"
#~ msgstr "FILE"

#~ msgid "Read FILE as a makefile"
#~ msgstr "将 FILE 作为 makefile 读入"

#~ msgid "Search DIRECTORY for included makefiles"
#~ msgstr "在 DIRECTORY 中搜索引入的 makefile"

#~ msgid "Don't start multiple jobs unless load is below N"
#~ msgstr "除非负载低于 N 否则就不启动多个任务"

#~ msgid "Don't actually run any commands; just print them"
#~ msgstr "不会实际运行任何命令；只是打印它们"

#~ msgid "Consider FILE to be very old and don't remake it"
#~ msgstr "将 FILE 认定为过于陈旧而不重现创建它"

#~ msgid "Don't echo commands"
#~ msgstr "不要回显命令"

#~ msgid "Turns off -k"
#~ msgstr "关闭 -k"

#~ msgid "Consider FILE to be infinitely new"
#~ msgstr "将 FILE 看做无限新"

#~ msgid "Do not specify -j or --jobs if sh.exe is not available."
#~ msgstr "如果 sh.exe 不可用，就不要给出 -j 或 --jobs。"

#~ msgid "Resetting make for single job mode."
#~ msgstr "将 make 重置为单任务模式。"

#~ msgid "Entering"
#~ msgstr "正在进入"

#~ msgid "Leaving"
#~ msgstr "正在离开"

#~ msgid "no file name for `%sinclude'"
#~ msgstr "“%sinclude” 没有文件名"

#~ msgid "# No variables."
#~ msgstr "# 没有变量。"

#~ msgid "# average of %.1f variables per bucket, max %u in one bucket.\n"
#~ msgstr "# 每个杂凑单元平均存储 %.1f 个变量，一个单元最多存储 %u 个。\n"

#~ msgid "# average of %d.%d variables per bucket, max %u in one bucket.\n"
#~ msgstr "# 每个杂凑单元平均存储 %d.%d 个变量，一个单元最多存储 %u 个。\n"