# Simplified Chinese translation for opcode.
# Copyright (C) 2005 Free Software Foundation, Inc.
# This file is distributed under the same license as the binutils package.
# Meng Jie <zuxyhere@eastday.com>, 2005.
# Mingye Wang <arthur200126@gmail.com>, 2015.
# Boyuan Yang <073plan@gmail.com>, 2017, 2018.
#
msgid ""
msgstr ""
"Project-Id-Version: opcodes 2.30.0\n"
"Report-Msgid-Bugs-To: bug-binutils@gnu.org\n"
"POT-Creation-Date: 2020-07-04 10:28+0100\n"
"PO-Revision-Date: 2018-05-15 21:17+0800\n"
"Last-Translator: Boyuan Yang <073plan@gmail.com>\n"
"Language-Team: Chinese (simplified) <i18n-zh@googlegroups.com>\n"
"Language: zh_CN\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=1; plural=0;\n"
"X-Bugs: Report translation errors to the Language-Team address.\n"
"X-Generator: Poedit 2.0.7\n"

#: aarch64-asm.c:820
msgid "specified register cannot be read from"
msgstr ""

#: aarch64-asm.c:829
msgid "specified register cannot be written to"
msgstr ""

#. Invalid option.
#: aarch64-dis.c:93 arc-dis.c:802 arm-dis.c:11654
#, fuzzy, c-format
#| msgid "Unrecognised disassembler option: %s\n"
msgid "unrecognised disassembler option: %s"
msgstr "无法识别的反汇编器选项：%s\n"

#: aarch64-dis.c:3531
#, c-format
msgid ""
"\n"
"The following AARCH64 specific disassembler options are supported for use\n"
"with the -M switch (multiple options should be separated by commas):\n"
msgstr ""
"\n"
"下列 AARCH64 特定的反汇编器选项可通过 -M 开关启用（使用逗号分隔多个选项）：\n"

#: aarch64-dis.c:3535
#, c-format
msgid ""
"\n"
"  no-aliases         Don't print instruction aliases.\n"
msgstr ""
"\n"
"  no-aliases         不要打印指令别名。\n"

#: aarch64-dis.c:3538
#, c-format
msgid ""
"\n"
"  aliases            Do print instruction aliases.\n"
msgstr ""
"\n"
"  aliases            要打印指令别名。\n"

#: aarch64-dis.c:3541
#, fuzzy, c-format
#| msgid ""
#| "\n"
#| "  no-aliases         Don't print instruction aliases.\n"
msgid ""
"\n"
"  no-notes         Don't print instruction notes.\n"
msgstr ""
"\n"
"  no-aliases         不要打印指令别名。\n"

#: aarch64-dis.c:3544
#, fuzzy, c-format
#| msgid ""
#| "\n"
#| "  aliases            Do print instruction aliases.\n"
msgid ""
"\n"
"  notes            Do print instruction notes.\n"
msgstr ""
"\n"
"  aliases            要打印指令别名。\n"

#: aarch64-dis.c:3548
#, c-format
msgid ""
"\n"
"  debug_dump         Temp switch for debug trace.\n"
msgstr ""
"\n"
"  debug_dump         调试跟踪的临时开关。\n"

#: aarch64-dis.c:3552 mips-dis.c:2778 mips-dis.c:2788 mips-dis.c:2791
#: nfp-dis.c:2981 riscv-dis.c:620
#, c-format
msgid "\n"
msgstr "\n"

#: aarch64-opc.c:1347
msgid "immediate value"
msgstr "立即数"

#: aarch64-opc.c:1357
msgid "immediate offset"
msgstr "立即数偏移"

#: aarch64-opc.c:1367
msgid "register number"
msgstr "寄存器数"

#: aarch64-opc.c:1377
msgid "register element index"
msgstr "寄存器元素下标"

#: aarch64-opc.c:1387
msgid "shift amount"
msgstr "移位操作数"

#: aarch64-opc.c:1399
msgid "multiplier"
msgstr ""

#: aarch64-opc.c:1472
msgid "reg pair must start from even reg"
msgstr ""

#: aarch64-opc.c:1478
msgid "reg pair must be contiguous"
msgstr ""

#: aarch64-opc.c:1492
msgid "extraneous register"
msgstr "多余寄存器"

#: aarch64-opc.c:1498
msgid "missing register"
msgstr "缺失寄存器"

#: aarch64-opc.c:1509
msgid "stack pointer register expected"
msgstr "预期的堆栈指针寄存器"

#: aarch64-opc.c:1534
msgid "z0-z15 expected"
msgstr "预期为 z0-z15"

#: aarch64-opc.c:1535
msgid "z0-z7 expected"
msgstr "预期为 z0-z7"

#: aarch64-opc.c:1561
#, fuzzy
#| msgid "Bad register name"
msgid "invalid register list"
msgstr "%q+D的寄存器名无效"

#: aarch64-opc.c:1575
msgid "p0-p7 expected"
msgstr "预期为 p0-p7"

#: aarch64-opc.c:1601 aarch64-opc.c:1609
msgid "unexpected address writeback"
msgstr "意外的地址写回"

#: aarch64-opc.c:1620
msgid "address writeback expected"
msgstr "预期的地址写回"

#: aarch64-opc.c:1667
msgid "negative or unaligned offset expected"
msgstr "预期的负或未对齐的偏移量"

#: aarch64-opc.c:1724
msgid "invalid register offset"
msgstr "无效的寄存器偏移量"

#: aarch64-opc.c:1746
#, fuzzy
msgid "invalid post-increment amount"
msgstr "类型没有后自增运算符"

#: aarch64-opc.c:1762 aarch64-opc.c:2271
msgid "invalid shift amount"
msgstr "无效的移位操作数"

#: aarch64-opc.c:1775
#, fuzzy
#| msgid "invalid conditional option"
msgid "invalid extend/shift operator"
msgstr "无效的移位操作符"

#: aarch64-opc.c:1821 aarch64-opc.c:2073 aarch64-opc.c:2108 aarch64-opc.c:2127
#: aarch64-opc.c:2135 aarch64-opc.c:2224 aarch64-opc.c:2401 aarch64-opc.c:2501
#: aarch64-opc.c:2514
msgid "immediate out of range"
msgstr "立即数越界"

#: aarch64-opc.c:1843 aarch64-opc.c:1885 aarch64-opc.c:1947 aarch64-opc.c:1981
msgid "invalid addressing mode"
msgstr "无效寻址模式"

#: aarch64-opc.c:1939
#, fuzzy
msgid "index register xzr is not allowed"
msgstr "寄存器元素下标"

#: aarch64-opc.c:2061 aarch64-opc.c:2083 aarch64-opc.c:2304 aarch64-opc.c:2312
#: aarch64-opc.c:2378 aarch64-opc.c:2407
msgid "invalid shift operator"
msgstr "无效的移位操作符"

#: aarch64-opc.c:2067
msgid "shift amount must be 0 or 12"
msgstr "移位量必须为 0 或 12"

#: aarch64-opc.c:2090
msgid "shift amount must be a multiple of 16"
msgstr "移位量必须是 16 的倍数"

#: aarch64-opc.c:2102
msgid "negative immediate value not allowed"
msgstr "不允许负立即数"

#: aarch64-opc.c:2235
#, fuzzy
msgid "immediate zero expected"
msgstr "预期的浮点常量立即数"

#: aarch64-opc.c:2249
#, fuzzy
#| msgid "shift amount expected to be 0 or 12"
msgid "rotate expected to be 0, 90, 180 or 270"
msgstr "移位量预计为 0 或 12"

#: aarch64-opc.c:2260
#, fuzzy
#| msgid "shift amount expected to be 0 or 12"
msgid "rotate expected to be 90 or 270"
msgstr "移位量预计为 0 或 12"

#: aarch64-opc.c:2320
#, fuzzy
msgid "shift is not permitted"
msgstr "指针不能用作 case 常量"

#: aarch64-opc.c:2345
msgid "invalid value for immediate"
msgstr "无效的立即数的值"

#: aarch64-opc.c:2370
msgid "shift amount must be 0 or 16"
msgstr "移位量必须为 0 或 16"

#: aarch64-opc.c:2391
msgid "floating-point immediate expected"
msgstr "预期的浮点常量立即数"

#: aarch64-opc.c:2425
msgid "no shift amount allowed for 8-bit constants"
msgstr ""

#: aarch64-opc.c:2435
msgid "shift amount must be 0 or 8"
msgstr "移位量必须为 0 或 8"

#: aarch64-opc.c:2448
msgid "immediate too big for element size"
msgstr ""

#: aarch64-opc.c:2455
msgid "invalid arithmetic immediate"
msgstr "无效的算术立即数"

#: aarch64-opc.c:2469
msgid "floating-point value must be 0.5 or 1.0"
msgstr "浮点值必须为 0.5 或 1.0"

#: aarch64-opc.c:2479
msgid "floating-point value must be 0.5 or 2.0"
msgstr "浮点值必须为 0.5 或 2.0"

#: aarch64-opc.c:2489
msgid "floating-point value must be 0.0 or 1.0"
msgstr "浮点值必须为 0.0 或 1.0"

#: aarch64-opc.c:2520
#, fuzzy
#| msgid "invalid mask field"
msgid "invalid replicated MOV immediate"
msgstr "不允许负立即数"

#: aarch64-opc.c:2641
#, fuzzy
msgid "extend operator expected"
msgstr "需要%<operator%>"

#: aarch64-opc.c:2654
#, fuzzy
msgid "missing extend operator"
msgstr "扩展%s 失败"

#: aarch64-opc.c:2660
msgid "'LSL' operator not allowed"
msgstr "不允许 'LSL' 操作符"

#: aarch64-opc.c:2681
msgid "W register expected"
msgstr "预期的 W 寄存器"

#: aarch64-opc.c:2692
msgid "shift operator expected"
msgstr "预期的移位操作符"

#: aarch64-opc.c:2699
msgid "'ROR' operator not allowed"
msgstr "不允许 'ROR' 操作符"

#: aarch64-opc.c:3714
#, fuzzy
msgid "reading from a write-only register"
msgstr "尝试读取 writeonly 登记册"

#: aarch64-opc.c:3716
#, fuzzy
msgid "writing to a read-only register"
msgstr "不能设置只读属性"

#: aarch64-opc.c:4711
msgid "instruction opens new dependency sequence without ending previous one"
msgstr ""

#: aarch64-opc.c:4731
msgid "previous `movprfx' sequence not closed"
msgstr ""

#: aarch64-opc.c:4750
msgid "SVE instruction expected after `movprfx'"
msgstr ""

#: aarch64-opc.c:4763
msgid "SVE `movprfx' compatible instruction expected"
msgstr ""

#: aarch64-opc.c:4850
msgid "predicated instruction expected after `movprfx'"
msgstr ""

#: aarch64-opc.c:4862
msgid "merging predicate expected due to preceding `movprfx'"
msgstr ""

#: aarch64-opc.c:4874
msgid "predicate register differs from that in preceding `movprfx'"
msgstr ""

#: aarch64-opc.c:4893
msgid "output register of preceding `movprfx' not used in current instruction"
msgstr ""

#: aarch64-opc.c:4906
msgid "output register of preceding `movprfx' expected as output"
msgstr ""

#: aarch64-opc.c:4918
msgid "output register of preceding `movprfx' used as input"
msgstr ""

#: aarch64-opc.c:4934
msgid "register size not compatible with previous `movprfx'"
msgstr ""

#: alpha-opc.c:154
msgid "branch operand unaligned"
msgstr "分支操作数未对齐"

#: alpha-opc.c:170 alpha-opc.c:186
msgid "jump hint unaligned"
msgstr "跳转提示未对齐"

#: arc-dis.c:379
msgid ""
"\n"
"Warning: disassembly may be wrong due to guessed opcode class choice.\n"
"Use -M<class[,class]> to select the correct opcode class(es).\n"
"\t\t\t\t"
msgstr ""

#: arc-dis.c:440
msgid "An error occured while generating the extension instruction operations"
msgstr ""

#: arc-dis.c:845
#, fuzzy, c-format
#| msgid "Unrecognised disassembler CPU option: %s\n"
msgid "unrecognised disassembler CPU option: %s"
msgstr "无法识别的反汇编器 CPU 选项：%s\n"

#: arc-dis.c:1412
#, fuzzy, c-format
#| msgid ""
#| "\n"
#| "The following AARCH64 specific disassembler options are supported for use\n"
#| "with the -M switch (multiple options should be separated by commas):\n"
msgid ""
"\n"
"The following ARC specific disassembler options are supported for use \n"
"with -M switch (multiple options should be separated by commas):\n"
msgstr ""
"\n"
"下列 AARCH64 特定的反汇编器选项可通过 -M 开关启用（使用逗号分隔多个选项）：\n"

#: arc-dis.c:1424
#, c-format
msgid "  dsp             Recognize DSP instructions.\n"
msgstr "  dsp             识别 DSP 指令。\n"

#: arc-dis.c:1426
#, c-format
msgid "  spfp            Recognize FPX SP instructions.\n"
msgstr "  spfp            识别 FPX SP 指令。\n"

#: arc-dis.c:1428
#, c-format
msgid "  dpfp            Recognize FPX DP instructions.\n"
msgstr "  dpfp            识别 FPX DP 指令。\n"

#: arc-dis.c:1430
#, fuzzy, c-format
#| msgid ""
#| "\n"
#| "  msa             Recognize MSA instructions.\n"
msgid "  quarkse_em      Recognize FPU QuarkSE-EM instructions.\n"
msgstr ""
"\n"
"  msa             识别 MSA 指令。\n"

#: arc-dis.c:1432
#, fuzzy, c-format
#| msgid ""
#| "\n"
#| "  msa             Recognize MSA instructions.\n"
msgid "  fpuda           Recognize double assist FPU instructions.\n"
msgstr ""
"\n"
"  msa             识别 MSA 指令。\n"

#: arc-dis.c:1434
#, c-format
msgid "  fpus            Recognize single precision FPU instructions.\n"
msgstr "  fpus            识别单精度 FPU 指令。\n"

#: arc-dis.c:1436
#, c-format
msgid "  fpud            Recognize double precision FPU instructions.\n"
msgstr "  fpud            识别双精度 FPU 指令。\n"

#: arc-dis.c:1438
#, fuzzy, c-format
#| msgid "  dsp             Recognize DSP instructions.\n"
msgid "  nps400          Recognize NPS400 instructions.\n"
msgstr "  dsp             识别 DSP 指令。\n"

#: arc-dis.c:1440
#, c-format
msgid "  hex             Use only hexadecimal number to print immediates.\n"
msgstr ""

#: arc-opc.c:41 arc-opc.c:64 arc-opc.c:90
msgid "LP_COUNT register cannot be used as destination register"
msgstr ""

#: arc-opc.c:88
msgid "cannot use odd number destination register"
msgstr ""

#: arc-opc.c:101
msgid "cannot use odd number source register"
msgstr ""

#: arc-opc.c:114
msgid "operand is not zero"
msgstr "操作数不是 0"

#: arc-opc.c:173
#, fuzzy
msgid "register R30 is a limm indicator"
msgstr "立即数不能是寄存器"

#: arc-opc.c:175
#, fuzzy
#| msgid "immediate out of range"
msgid "register out of range"
msgstr "立即数越界"

#: arc-opc.c:194
msgid "register must be R0"
msgstr "寄存器必须是 R0"

#: arc-opc.c:212
msgid "register must be R1"
msgstr "寄存器必须是 R1"

#: arc-opc.c:229
msgid "register must be R2"
msgstr "寄存器必须是 R2"

#: arc-opc.c:246
msgid "register must be R3"
msgstr "寄存器必须是 R3"

#: arc-opc.c:263
msgid "register must be SP"
msgstr "寄存器必须是 SP"

#: arc-opc.c:280
msgid "register must be GP"
msgstr "寄存器必须是 GP"

#: arc-opc.c:297
msgid "register must be PCL"
msgstr "寄存器必须是 PCL"

#: arc-opc.c:314
msgid "register must be BLINK"
msgstr "寄存器必须是 BLINK"

#: arc-opc.c:331
msgid "register must be ILINK1"
msgstr "寄存器必须是 ILINK1"

#: arc-opc.c:348
msgid "register must be ILINK2"
msgstr "寄存器必须是 ILINK2"

#. ARC NPS400 Support: See comment near head of file.
#: arc-opc.c:379 arc-opc.c:417 arc-opc.c:455 arc-opc.c:724
msgid "register must be either r0-r3 or r12-r15"
msgstr "寄存器必须是 r0-r3 或 r12-r15"

#: arc-opc.c:506
msgid "accepted values are from -1 to 6"
msgstr "可接受的值在 -1 到 6 之间"

#: arc-opc.c:535
#, fuzzy
#| msgid "Bad register name"
msgid "first register of the range should be r13"
msgstr "%q+D的寄存器名无效"

#: arc-opc.c:537
msgid "last register of the range doesn't fit"
msgstr ""

#: arc-opc.c:557 arc-opc.c:572
msgid "invalid register number, should be fp"
msgstr "无效的寄存器数，应当为 fp"

#: arc-opc.c:594
msgid "invalid register number, should be blink"
msgstr "无效的寄存器数，应当为 blink"

#: arc-opc.c:616
msgid "invalid register number, should be pcl"
msgstr "无效的寄存器数，应当为 pcl"

#: arc-opc.c:772
msgid "invalid size, should be 1, 2, 4, or 8"
msgstr "无效的大小，应当为 1、2、4 或 8"

#: arc-opc.c:817
msgid "invalid immediate, must be 1, 2, or 4"
msgstr "无效的立即数，应当为 1、2 或 4"

#: arc-opc.c:856
#, fuzzy
#| msgid "invalid mask field"
msgid "invalid value for CMEM ld/st immediate"
msgstr "不允许负立即数"

#: arc-opc.c:883
msgid "invalid position, should be 0, 16, 32, 48 or 64."
msgstr "无效的位置，应当为 0、16、32、48 或 64。"

#: arc-opc.c:917
msgid "invalid position, should be 16, 32, 64 or 128."
msgstr "无效的位置，应当为 16、32、64 或 128。"

#: arc-opc.c:939
#, fuzzy
#| msgid "immediate value out of range"
msgid "invalid size value must be on range 1-64."
msgstr "立即数越界"

#: arc-opc.c:970
#, fuzzy
#| msgid "Invalid position, should be 0, 8, 16, or 24"
msgid "invalid position, should be 0, 8, 16, or 24"
msgstr "无效的位置，应当为 0、8、16 或 24"

#: arc-opc.c:995
msgid "invalid size, value must be "
msgstr "无效的大小，值必须为 "

#: arc-opc.c:1069
msgid "value out of range 1 - 256"
msgstr "值越界 1 - 256"

#: arc-opc.c:1078
msgid "value must be power of 2"
msgstr "值必须是 2 的倍数"

#: arc-opc.c:1131
msgid "value must be in the range 0 to 28"
msgstr "值必须在 0 到 28 的范围中"

#: arc-opc.c:1153
msgid "value must be in the range 1 to "
msgstr "值的范围必须在 1 到 "

#: arc-opc.c:1183
msgid "value must be in the range 0 to 240"
msgstr "值必须在 0 到 240 的范围中"

#: arc-opc.c:1185
msgid "value must be a multiple of 16"
msgstr "值必须是 16 的倍数"

#: arc-opc.c:1205
#, fuzzy
msgid "invalid address type for operand"
msgstr "无效寻址模式"

#: arc-opc.c:1239
msgid "value must be in the range 0 to 31"
msgstr "值必须在 0 到 31 的范围中"

#: arc-opc.c:1264
msgid "invalid position, should be one of: 0,4,8,...124."
msgstr "无效的位置，应当为 0、4、8、...、124。"

#: arm-dis.c:5192
msgid "Select raw register names"
msgstr "选择原始寄存器名称"

#: arm-dis.c:5194
msgid "Select register names used by GCC"
msgstr "选择 GCC 使用的寄存器名称"

#: arm-dis.c:5196
msgid "Select register names used in ARM's ISA documentation"
msgstr "选择 ARM 的 ISA 文档中使用的寄存器名称"

#: arm-dis.c:5198
msgid "Assume all insns are Thumb insns"
msgstr ""

#: arm-dis.c:5199
msgid "Examine preceding label to determine an insn's type"
msgstr ""

#: arm-dis.c:5200
#, fuzzy
#| msgid "register number must be even"
msgid "Select register names used in the APCS"
msgstr "立即数不能是寄存器"

#: arm-dis.c:5202
#, fuzzy
#| msgid "register number must be even"
msgid "Select register names used in the ATPCS"
msgstr "立即数不能是寄存器"

#: arm-dis.c:5204
msgid "Select special register names used in the ATPCS"
msgstr "选择 ATPCS 中使用的特殊寄存器名称"

#: arm-dis.c:5206
msgid "Enable CDE extensions for coprocessor N space"
msgstr ""

#: arm-dis.c:8375
msgid "<illegal precision>"
msgstr "<非法的精度>"

#: arm-dis.c:11615
#, fuzzy, c-format
#| msgid "Unrecognised register name set: %s\n"
msgid "unrecognised register name set: %s"
msgstr "无法识别的寄存器名称集：%s\n"

#: arm-dis.c:11629
#, c-format
msgid "cde coprocessor not between 0-7: %s"
msgstr ""

#: arm-dis.c:11635
#, c-format
msgid "coproc must have an argument: %s"
msgstr ""

#: arm-dis.c:11648
#, c-format
msgid "coprocN argument takes options \"generic\", \"cde\", or \"CDE\": %s"
msgstr ""

#: arm-dis.c:12359
#, c-format
msgid ""
"\n"
"The following ARM specific disassembler options are supported for use with\n"
"the -M switch:\n"
msgstr ""
"\n"
"下列 ARM 特定的反汇编器选项可通过 -M 开关启用：\n"

#: avr-dis.c:115 avr-dis.c:136
#, c-format
msgid "undefined"
msgstr "未定义"

#: avr-dis.c:218
#, fuzzy, c-format
#| msgid "<internal disassembler error>"
msgid "internal disassembler error"
msgstr "<反汇编器内部错误>"

#: avr-dis.c:272
#, c-format
msgid "unknown constraint `%c'"
msgstr "未知的约束‘%c’"

#: bpf-asm.c:97
msgid "expected 16, 32 or 64 in"
msgstr ""

#: bpf-asm.c:181 epiphany-asm.c:456 fr30-asm.c:311 frv-asm.c:1264
#: ip2k-asm.c:512 iq2000-asm.c:460 lm32-asm.c:350 m32c-asm.c:1585
#: m32r-asm.c:329 mep-asm.c:1287 mt-asm.c:596 or1k-asm.c:571 xc16x-asm.c:377
#: xstormy16-asm.c:277
#, fuzzy, c-format
msgid "internal error: unrecognized field %d while parsing"
msgstr "打印 insn 时遇到无法识别的字段 %d。\n"

#: bpf-asm.c:233 epiphany-asm.c:508 fr30-asm.c:363 frv-asm.c:1316
#: ip2k-asm.c:564 iq2000-asm.c:512 lm32-asm.c:402 m32c-asm.c:1637
#: m32r-asm.c:381 mep-asm.c:1339 mt-asm.c:648 or1k-asm.c:623 xc16x-asm.c:429
#: xstormy16-asm.c:329
msgid "missing mnemonic in syntax string"
msgstr "语法字符串中没有助记符"

#. We couldn't parse it.
#: bpf-asm.c:368 bpf-asm.c:372 bpf-asm.c:461 bpf-asm.c:568 epiphany-asm.c:643
#: epiphany-asm.c:647 epiphany-asm.c:736 epiphany-asm.c:843 fr30-asm.c:498
#: fr30-asm.c:502 fr30-asm.c:591 fr30-asm.c:698 frv-asm.c:1451 frv-asm.c:1455
#: frv-asm.c:1544 frv-asm.c:1651 ip2k-asm.c:699 ip2k-asm.c:703 ip2k-asm.c:792
#: ip2k-asm.c:899 iq2000-asm.c:647 iq2000-asm.c:651 iq2000-asm.c:740
#: iq2000-asm.c:847 lm32-asm.c:537 lm32-asm.c:541 lm32-asm.c:630
#: lm32-asm.c:737 m32c-asm.c:1772 m32c-asm.c:1776 m32c-asm.c:1865
#: m32c-asm.c:1972 m32r-asm.c:516 m32r-asm.c:520 m32r-asm.c:609 m32r-asm.c:716
#: mep-asm.c:1474 mep-asm.c:1478 mep-asm.c:1567 mep-asm.c:1674 mt-asm.c:783
#: mt-asm.c:787 mt-asm.c:876 mt-asm.c:983 or1k-asm.c:758 or1k-asm.c:762
#: or1k-asm.c:851 or1k-asm.c:958 xc16x-asm.c:564 xc16x-asm.c:568
#: xc16x-asm.c:657 xc16x-asm.c:764 xstormy16-asm.c:464 xstormy16-asm.c:468
#: xstormy16-asm.c:557 xstormy16-asm.c:664
msgid "unrecognized instruction"
msgstr "无法识别的指令"

#: bpf-asm.c:415 epiphany-asm.c:690 fr30-asm.c:545 frv-asm.c:1498
#: ip2k-asm.c:746 iq2000-asm.c:694 lm32-asm.c:584 m32c-asm.c:1819
#: m32r-asm.c:563 mep-asm.c:1521 mt-asm.c:830 or1k-asm.c:805 xc16x-asm.c:611
#: xstormy16-asm.c:511
#, c-format
msgid "syntax error (expected char `%c', found `%c')"
msgstr "语法错误(需要字符‘%c’，得到‘%c’)"

#: bpf-asm.c:425 epiphany-asm.c:700 fr30-asm.c:555 frv-asm.c:1508
#: ip2k-asm.c:756 iq2000-asm.c:704 lm32-asm.c:594 m32c-asm.c:1829
#: m32r-asm.c:573 mep-asm.c:1531 mt-asm.c:840 or1k-asm.c:815 xc16x-asm.c:621
#: xstormy16-asm.c:521
#, c-format
msgid "syntax error (expected char `%c', found end of instruction)"
msgstr "语法错误(需要字符‘%c’，却到达指令尾)"

#: bpf-asm.c:455 epiphany-asm.c:730 fr30-asm.c:585 frv-asm.c:1538
#: ip2k-asm.c:786 iq2000-asm.c:734 lm32-asm.c:624 m32c-asm.c:1859
#: m32r-asm.c:603 mep-asm.c:1561 mt-asm.c:870 or1k-asm.c:845 xc16x-asm.c:651
#: xstormy16-asm.c:551
msgid "junk at end of line"
msgstr "行尾有垃圾字符"

#: bpf-asm.c:567 epiphany-asm.c:842 fr30-asm.c:697 frv-asm.c:1650
#: ip2k-asm.c:898 iq2000-asm.c:846 lm32-asm.c:736 m32c-asm.c:1971
#: m32r-asm.c:715 mep-asm.c:1673 mt-asm.c:982 or1k-asm.c:957 xc16x-asm.c:763
#: xstormy16-asm.c:663
msgid "unrecognized form of instruction"
msgstr "无法识别的指令格式"

#: bpf-asm.c:581 epiphany-asm.c:856 fr30-asm.c:711 frv-asm.c:1664
#: ip2k-asm.c:912 iq2000-asm.c:860 lm32-asm.c:750 m32c-asm.c:1985
#: m32r-asm.c:729 mep-asm.c:1687 mt-asm.c:996 or1k-asm.c:971 xc16x-asm.c:777
#: xstormy16-asm.c:677
#, c-format
msgid "bad instruction `%.50s...'"
msgstr "错误的指令‘%.50s...’"

#: bpf-asm.c:584 epiphany-asm.c:859 fr30-asm.c:714 frv-asm.c:1667
#: ip2k-asm.c:915 iq2000-asm.c:863 lm32-asm.c:753 m32c-asm.c:1988
#: m32r-asm.c:732 mep-asm.c:1690 mt-asm.c:999 or1k-asm.c:974 xc16x-asm.c:780
#: xstormy16-asm.c:680
#, c-format
msgid "bad instruction `%.50s'"
msgstr "错误的指令‘%.50s’"

#: bpf-desc.c:1671
#, c-format
msgid "internal error: bpf_cgen_rebuild_tables: conflicting insn-chunk-bitsize values: `%d' vs. `%d'"
msgstr ""

#: bpf-desc.c:1759
#, c-format
msgid "internal error: bpf_cgen_cpu_open: unsupported argument `%d'"
msgstr ""

#: bpf-desc.c:1778
#, c-format
msgid "internal error: bpf_cgen_cpu_open: no endianness specified"
msgstr ""

#. Default text to print if an instruction isn't recognized.
#: bpf-dis.c:41 epiphany-dis.c:41 fr30-dis.c:41 frv-dis.c:41 ip2k-dis.c:41
#: iq2000-dis.c:41 lm32-dis.c:41 m32c-dis.c:41 m32r-dis.c:41 mep-dis.c:41
#: mmix-dis.c:293 mt-dis.c:41 nds32-dis.c:64 or1k-dis.c:41 xc16x-dis.c:41
#: xstormy16-dis.c:41
msgid "*unknown*"
msgstr "*未知*"

#: bpf-dis.c:203 epiphany-dis.c:279 fr30-dis.c:300 frv-dis.c:397
#: ip2k-dis.c:289 iq2000-dis.c:190 lm32-dis.c:148 m32c-dis.c:892
#: m32r-dis.c:280 mep-dis.c:1188 mt-dis.c:291 or1k-dis.c:175 xc16x-dis.c:421
#: xstormy16-dis.c:169
#, fuzzy, c-format
#| msgid "Unrecognized field %d while printing insn.\n"
msgid "internal error: unrecognized field %d while printing insn"
msgstr "打印 insn 时遇到无法识别的字段 %d。\n"

#: bpf-ibld.c:164 epiphany-ibld.c:164 fr30-ibld.c:164 frv-ibld.c:164
#: ip2k-ibld.c:164 iq2000-ibld.c:164 lm32-ibld.c:164 m32c-ibld.c:164
#: m32r-ibld.c:164 mep-ibld.c:164 mt-ibld.c:164 or1k-ibld.c:164
#: xc16x-ibld.c:164 xstormy16-ibld.c:164
#, c-format
msgid "operand out of range (%ld not between %ld and %lu)"
msgstr "操作数越界 (%ld 不在 %ld 和 %lu 之间)"

#: bpf-ibld.c:185 epiphany-ibld.c:185 fr30-ibld.c:185 frv-ibld.c:185
#: ip2k-ibld.c:185 iq2000-ibld.c:185 lm32-ibld.c:185 m32c-ibld.c:185
#: m32r-ibld.c:185 mep-ibld.c:185 mt-ibld.c:185 or1k-ibld.c:185
#: xc16x-ibld.c:185 xstormy16-ibld.c:185
#, fuzzy, c-format
#| msgid "operand out of range (%lu not between 0 and %lu)"
msgid "operand out of range (0x%lx not between 0 and 0x%lx)"
msgstr "操作数超出范围 (0x %lx 请不是 0 和 0x %lx 之间)"

#: bpf-ibld.c:201 cgen-asm.c:351 epiphany-ibld.c:201 fr30-ibld.c:201
#: frv-ibld.c:201 ip2k-ibld.c:201 iq2000-ibld.c:201 lm32-ibld.c:201
#: m32c-ibld.c:201 m32r-ibld.c:201 mep-ibld.c:201 mt-ibld.c:201
#: or1k-ibld.c:201 xc16x-ibld.c:201 xstormy16-ibld.c:201
#, c-format
msgid "operand out of range (%ld not between %ld and %ld)"
msgstr "操作数越界(%ld 不在 %ld 和 %ld 之间)"

#: bpf-ibld.c:628 epiphany-ibld.c:883 fr30-ibld.c:738 frv-ibld.c:864
#: ip2k-ibld.c:615 iq2000-ibld.c:721 lm32-ibld.c:642 m32c-ibld.c:1739
#: m32r-ibld.c:673 mep-ibld.c:1216 mt-ibld.c:757 or1k-ibld.c:736
#: xc16x-ibld.c:760 xstormy16-ibld.c:686
#, fuzzy, c-format
#| msgid "Unrecognized field %d while building insn.\n"
msgid "internal error: unrecognized field %d while building insn"
msgstr "建立 insn 时遇到无法识别的字段 %d。\n"

#: bpf-ibld.c:712 epiphany-ibld.c:1178 fr30-ibld.c:944 frv-ibld.c:1182
#: ip2k-ibld.c:691 iq2000-ibld.c:897 lm32-ibld.c:747 m32c-ibld.c:2901
#: m32r-ibld.c:811 mep-ibld.c:1816 mt-ibld.c:978 or1k-ibld.c:895
#: xc16x-ibld.c:981 xstormy16-ibld.c:833
#, fuzzy, c-format
#| msgid "Unrecognized field %d while decoding insn.\n"
msgid "internal error: unrecognized field %d while decoding insn"
msgstr "解码 insn 时遇到无法识别的字段 %d。\n"

#: bpf-ibld.c:781 epiphany-ibld.c:1322 fr30-ibld.c:1091 frv-ibld.c:1461
#: ip2k-ibld.c:766 iq2000-ibld.c:1029 lm32-ibld.c:837 m32c-ibld.c:3519
#: m32r-ibld.c:925 mep-ibld.c:2287 mt-ibld.c:1179 or1k-ibld.c:991
#: xc16x-ibld.c:1203 xstormy16-ibld.c:944
#, fuzzy, c-format
#| msgid "Unrecognized field %d while getting int operand.\n"
msgid "internal error: unrecognized field %d while getting int operand"
msgstr "获得 int 操作数时遇到无法识别的字段 %d。\n"

#: bpf-ibld.c:832 epiphany-ibld.c:1448 fr30-ibld.c:1220 frv-ibld.c:1722
#: ip2k-ibld.c:823 iq2000-ibld.c:1143 lm32-ibld.c:909 m32c-ibld.c:4119
#: m32r-ibld.c:1021 mep-ibld.c:2740 mt-ibld.c:1362 or1k-ibld.c:1069
#: xc16x-ibld.c:1407 xstormy16-ibld.c:1037
#, fuzzy, c-format
#| msgid "Unrecognized field %d while getting vma operand.\n"
msgid "internal error: unrecognized field %d while getting vma operand"
msgstr "获得 vma 操作数时遇到无法识别的字段 %d。\n"

#: bpf-ibld.c:890 epiphany-ibld.c:1581 fr30-ibld.c:1352 frv-ibld.c:1990
#: ip2k-ibld.c:883 iq2000-ibld.c:1264 lm32-ibld.c:988 m32c-ibld.c:4707
#: m32r-ibld.c:1123 mep-ibld.c:3154 mt-ibld.c:1552 or1k-ibld.c:1154
#: xc16x-ibld.c:1612 xstormy16-ibld.c:1137
#, fuzzy, c-format
#| msgid "Unrecognized field %d while setting int operand.\n"
msgid "internal error: unrecognized field %d while setting int operand"
msgstr "设置 int 操作数时遇到无法识别的字段 %d。\n"

#: bpf-ibld.c:938 epiphany-ibld.c:1704 fr30-ibld.c:1474 frv-ibld.c:2248
#: ip2k-ibld.c:933 iq2000-ibld.c:1375 lm32-ibld.c:1057 m32c-ibld.c:5285
#: m32r-ibld.c:1215 mep-ibld.c:3558 mt-ibld.c:1732 or1k-ibld.c:1229
#: xc16x-ibld.c:1807 xstormy16-ibld.c:1227
#, fuzzy, c-format
#| msgid "Unrecognized field %d while setting vma operand.\n"
msgid "internal error: unrecognized field %d while setting vma operand"
msgstr "设置 vma 操作数时遇到无法识别的字段 %d。\n"

#: cgen-asm.c:373
#, c-format
msgid "operand out of range (%lu not between %lu and %lu)"
msgstr "操作数越界(%lu 不在 %lu 和 %lu 之间)"

#: d30v-dis.c:232
#, fuzzy, c-format
#| msgid "illegal bitmask"
msgid "illegal id (%d)"
msgstr "非法的位掩码"

#: d30v-dis.c:259
#, c-format
msgid "<unknown register %d>"
msgstr "<未知的寄存器 %d>"

#. Can't happen.
#: dis-buf.c:61
#, c-format
msgid "Unknown error %d\n"
msgstr "未知错误 %d\n"

#: dis-buf.c:70
#, c-format
msgid "Address 0x%s is out of bounds.\n"
msgstr "地址 0x%s 越界。\n"

#: disassemble.c:840
#, c-format
msgid "assertion fail %s:%d"
msgstr ""

#: disassemble.c:841
msgid "Please report this bug"
msgstr ""

#: epiphany-asm.c:68
#, fuzzy
#| msgid "unrecognized form of instruction"
msgid "register unavailable for short instructions"
msgstr "启用对短加载指令的使用"

#: epiphany-asm.c:115
#, fuzzy
#| msgid "register number must be even"
msgid "register name used as immediate value"
msgstr "立即数不能是寄存器"

#. Don't treat "mov ip,ip" as a move-immediate.
#: epiphany-asm.c:178 epiphany-asm.c:234
#, fuzzy
msgid "register source in immediate move"
msgstr "立即数不能是寄存器"

#: epiphany-asm.c:187
msgid "byte relocation unsupported"
msgstr "不支持字节重定位"

#. -- assembler routines inserted here.
#. -- asm.c
#: epiphany-asm.c:193 frv-asm.c:972 iq2000-asm.c:56 lm32-asm.c:95
#: lm32-asm.c:127 lm32-asm.c:157 lm32-asm.c:187 lm32-asm.c:217 lm32-asm.c:247
#: m32c-asm.c:140 m32c-asm.c:235 m32c-asm.c:276 m32c-asm.c:334 m32c-asm.c:355
#: m32r-asm.c:53 mep-asm.c:241 mep-asm.c:259 mep-asm.c:274 mep-asm.c:289
#: mep-asm.c:301 or1k-asm.c:54
msgid "missing `)'"
msgstr "缺少‘)’"

#: epiphany-asm.c:270
msgid "ABORT: unknown operand"
msgstr "中止：未知的操作数"

#: epiphany-asm.c:296
#, fuzzy
msgid "Not a pc-relative address."
msgstr "生成相对 pc 的代码"

#: epiphany-desc.c:2109
#, c-format
msgid "internal error: epiphany_cgen_rebuild_tables: conflicting insn-chunk-bitsize values: `%d' vs. `%d'"
msgstr ""

#: epiphany-desc.c:2197
#, c-format
msgid "internal error: epiphany_cgen_cpu_open: unsupported argument `%d'"
msgstr ""

#: epiphany-desc.c:2216
#, c-format
msgid "internal error: epiphany_cgen_cpu_open: no endianness specified"
msgstr ""

#: fr30-asm.c:93 m32c-asm.c:872 m32c-asm.c:879
msgid "Register number is not valid"
msgstr "寄存器数字无效"

#: fr30-asm.c:95
msgid "Register must be between r0 and r7"
msgstr "寄存器必须 r0 和 r7 之间"

#: fr30-asm.c:97
msgid "Register must be between r8 and r15"
msgstr "寄存器必须 r8 和 r15 之间"

#: fr30-asm.c:116 m32c-asm.c:910
msgid "Register list is not valid"
msgstr "寄存器列表无效"

#: fr30-desc.c:1586
#, c-format
msgid "internal error: fr30_cgen_rebuild_tables: conflicting insn-chunk-bitsize values: `%d' vs. `%d'"
msgstr ""

#: fr30-desc.c:1674
#, c-format
msgid "internal error: fr30_cgen_cpu_open: unsupported argument `%d'"
msgstr ""

#: fr30-desc.c:1693
#, c-format
msgid "internal error: fr30_cgen_cpu_open: no endianness specified"
msgstr ""

#: frv-asm.c:608
msgid "missing `]'"
msgstr "缺少 `]'"

#: frv-asm.c:611 frv-asm.c:621
#, fuzzy
#| msgid "immediate value is out of range"
msgid "Special purpose register number is out of range"
msgstr "专用寄存器的编号是超出范围"

#: frv-asm.c:908
#, fuzzy
msgid "Value of A operand must be 0 or 1"
msgstr "数字必须是 0 或 1"

#: frv-asm.c:944
msgid "register number must be even"
msgstr "寄存器数必须是偶数"

#: frv-desc.c:6326
#, c-format
msgid "internal error: frv_cgen_rebuild_tables: conflicting insn-chunk-bitsize values: `%d' vs. `%d'"
msgstr ""

#: frv-desc.c:6414
#, c-format
msgid "internal error: frv_cgen_cpu_open: unsupported argument `%d'"
msgstr ""

#: frv-desc.c:6433
#, c-format
msgid "internal error: frv_cgen_cpu_open: no endianness specified"
msgstr ""

#: frv-opc.c:459
#, c-format
msgid "internal error: bad vliw->next_slot value"
msgstr ""

#: frv-opc.c:769
#, fuzzy, c-format
msgid "internal error: bad major code"
msgstr "内部错误：错误的 sparc-opcode.h：“%s”，%#.8lx，%#.8lx\n"

#: frv-opc.c:819
#, c-format
msgid "internal error: bad insn unit"
msgstr ""

#: h8300-dis.c:309
#, c-format
msgid "Hmmmm 0x%x"
msgstr "咦... 0x%x"

#: h8300-dis.c:617
#, c-format
msgid "Don't understand 0x%x \n"
msgstr "无法识别 0x%x \n"

#: i386-dis.c:11040
msgid "<internal disassembler error>"
msgstr "<反汇编器内部错误>"

#: i386-dis.c:11337
#, c-format
msgid ""
"\n"
"The following i386/x86-64 specific disassembler options are supported for use\n"
"with the -M switch (multiple options should be separated by commas):\n"
msgstr ""
"\n"
"下列 i386/x86-64 特定的反汇编器选项在使用 -M 开关时可用（使用逗号分隔多个选项）：\n"

#: i386-dis.c:11341
#, c-format
msgid "  x86-64      Disassemble in 64bit mode\n"
msgstr "  x86-64      在 64 位模式下反汇编\n"

#: i386-dis.c:11342
#, c-format
msgid "  i386        Disassemble in 32bit mode\n"
msgstr "  i386        在 32 位模式下反汇编\n"

#: i386-dis.c:11343
#, c-format
msgid "  i8086       Disassemble in 16bit mode\n"
msgstr "  i8086       在 16 位模式下反汇编\n"

#: i386-dis.c:11344
#, c-format
msgid "  att         Display instruction in AT&T syntax\n"
msgstr "  att         用 AT&T 语法显示指令\n"

#: i386-dis.c:11345
#, c-format
msgid "  intel       Display instruction in Intel syntax\n"
msgstr "  intel       用 Intel 语法显示指令\n"

#: i386-dis.c:11346
#, fuzzy, c-format
msgid ""
"  att-mnemonic\n"
"              Display instruction in AT&T mnemonic\n"
msgstr "  att         用 AT&T 语法显示指令\n"

#: i386-dis.c:11348
#, fuzzy, c-format
msgid ""
"  intel-mnemonic\n"
"              Display instruction in Intel mnemonic\n"
msgstr "  intel       用 Intel 语法显示指令\n"

#: i386-dis.c:11350
#, c-format
msgid "  addr64      Assume 64bit address size\n"
msgstr "  addr64      假定 64 位地址大小\n"

#: i386-dis.c:11351
#, c-format
msgid "  addr32      Assume 32bit address size\n"
msgstr "  addr32      假定 32 位地址大小\n"

#: i386-dis.c:11352
#, c-format
msgid "  addr16      Assume 16bit address size\n"
msgstr "  addr16      假定 16 位地址大小\n"

#: i386-dis.c:11353
#, c-format
msgid "  data32      Assume 32bit data size\n"
msgstr "  data32      假定 32 位数据大小\n"

#: i386-dis.c:11354
#, c-format
msgid "  data16      Assume 16bit data size\n"
msgstr "  data16      假定 16 位数据大小\n"

#: i386-dis.c:11355
#, c-format
msgid "  suffix      Always display instruction suffix in AT&T syntax\n"
msgstr "  suffix      在 AT&T 语法中始终显示指令后缀\n"

#: i386-dis.c:11356
#, fuzzy, c-format
#| msgid "  att         Display instruction in AT&T syntax\n"
msgid "  amd64       Display instruction in AMD64 ISA\n"
msgstr "  att         用 AT&T 语法显示指令\n"

#: i386-dis.c:11357
#, fuzzy, c-format
#| msgid "  intel       Display instruction in Intel syntax\n"
msgid "  intel64     Display instruction in Intel64 ISA\n"
msgstr "  intel       用 Intel 语法显示指令\n"

#: i386-dis.c:11912
msgid "64-bit address is disabled"
msgstr "64 位地址已禁用"

#: i386-gen.c:793
#, fuzzy, c-format
#| msgid "%s: Error: "
msgid "%s: error: "
msgstr "%s：错误："

#: i386-gen.c:960
#, fuzzy, c-format
msgid "%s: %d: unknown bitfield: %s\n"
msgstr "行 %d：未知标签：%s\n"

#: i386-gen.c:962
#, fuzzy, c-format
#| msgid "Unknown error %d\n"
msgid "unknown bitfield: %s\n"
msgstr "%s：未知函数‘%u’\n"

#: i386-gen.c:1025
#, fuzzy, c-format
msgid "%s: %d: missing `)' in bitfield: %s\n"
msgstr "缺少 %s%d %s：%s\n"

#: i386-gen.c:1126
#, fuzzy, c-format
msgid "unknown broadcast operand: %s\n"
msgstr "<未知>：%x"

#: i386-gen.c:1777
#, fuzzy, c-format
msgid "can't find i386-reg.tbl for reading, errno = %s\n"
msgstr "找不到阅读，errno i386 reg.tbl = %s"

#: i386-gen.c:1855
#, fuzzy, c-format
msgid "can't create i386-init.h, errno = %s\n"
msgstr "无法创建 i386-init.h，errno = %s"

#: i386-gen.c:1945 ia64-gen.c:2829
#, c-format
msgid "unable to change directory to \"%s\", errno = %s\n"
msgstr "无法将当前目录切换至“%s”，errno = %s\n"

#: i386-gen.c:1959 i386-gen.c:1964
#, c-format
msgid "CpuMax != %d!\n"
msgstr ""

#: i386-gen.c:1968
#, c-format
msgid "%d unused bits in i386_cpu_flags.\n"
msgstr ""

#: i386-gen.c:1983
#, fuzzy, c-format
msgid "%d unused bits in i386_operand_type.\n"
msgstr "%d 未使用的钻头在 i386_operand_type。"

#: i386-gen.c:1997
#, c-format
msgid "can't create i386-tbl.h, errno = %s\n"
msgstr "无法创建 i386-tbl.h，errno = %s\n"

#: ia64-gen.c:306
#, c-format
msgid "%s: Error: "
msgstr "%s：错误："

#: ia64-gen.c:319
#, c-format
msgid "%s: Warning: "
msgstr "%s：警告："

#: ia64-gen.c:505 ia64-gen.c:736
#, fuzzy, c-format
msgid "multiple note %s not handled\n"
msgstr "%s：多次重复定义符号“%s”"

#: ia64-gen.c:616
#, fuzzy
msgid "can't find ia64-ic.tbl for reading\n"
msgstr "找不到 ia64 ic.tbl 阅读"

#: ia64-gen.c:818
#, fuzzy, c-format
msgid "can't find %s for reading\n"
msgstr "%s：无法找到模块文件 %s\n"

#: ia64-gen.c:1050
#, fuzzy, c-format
msgid ""
"most recent format '%s'\n"
"appears more restrictive than '%s'\n"
msgstr "最新格式 %s 似乎比 %s 的限制性更强"

#: ia64-gen.c:1061
#, fuzzy, c-format
msgid "overlapping field %s->%s\n"
msgstr "缺少字段‘%s’，在‘%s’中"

#: ia64-gen.c:1258
#, fuzzy, c-format
msgid "overwriting note %d with note %d (IC:%s)\n"
msgstr "用注 %d (IC:%s) 覆盖注 %d"

#: ia64-gen.c:1465
#, c-format
msgid "don't know how to specify %% dependency %s\n"
msgstr "不知道如何指定 %% 依赖 %s\n"

#: ia64-gen.c:1487
#, c-format
msgid "Don't know how to specify # dependency %s\n"
msgstr "不知道如何指定 # 依赖 %s\n"

#: ia64-gen.c:1526
#, fuzzy, c-format
msgid "IC:%s [%s] has no terminals or sub-classes\n"
msgstr "IC:%s [%s] 没有任何终端或子类"

#: ia64-gen.c:1529
#, fuzzy, c-format
msgid "IC:%s has no terminals or sub-classes\n"
msgstr "IC:%s 有没有终端或子类"

#: ia64-gen.c:1538
#, fuzzy, c-format
msgid "no insns mapped directly to terminal IC %s [%s]"
msgstr "没有 insn 被直接映射到终端 IC %s [%s]"

#: ia64-gen.c:1541
#, fuzzy, c-format
msgid "no insns mapped directly to terminal IC %s\n"
msgstr "没有 insn 被直接映射到终端 IC %s\n"

#: ia64-gen.c:1552
#, fuzzy, c-format
msgid "class %s is defined but not used\n"
msgstr "%q+D定义后未使用"

#: ia64-gen.c:1565
#, fuzzy, c-format
msgid "Warning: rsrc %s (%s) has no chks\n"
msgstr "警告：%s 节的大小为零"

#: ia64-gen.c:1568
#, fuzzy, c-format
msgid "Warning: rsrc %s (%s) has no chks or regs\n"
msgstr "指数部分没有数字"

#: ia64-gen.c:1572
#, fuzzy, c-format
msgid "rsrc %s (%s) has no regs\n"
msgstr "%s 已不可访问"

#: ia64-gen.c:2464
#, c-format
msgid "IC note %d in opcode %s (IC:%s) conflicts with resource %s note %d\n"
msgstr ""

#: ia64-gen.c:2492
#, c-format
msgid "IC note %d for opcode %s (IC:%s) conflicts with resource %s note %d\n"
msgstr ""

#: ia64-gen.c:2506
#, fuzzy, c-format
msgid "opcode %s has no class (ops %d %d %d)\n"
msgstr "尚未定义名为“%s”的 <draw_ops>"

#. We've been passed a w.  Return with an error message so that
#. cgen will try the next parsing option.
#: ip2k-asm.c:81
msgid "W keyword invalid in FR operand slot."
msgstr "W 关键字非法，在 FR 操作数槽位中。"

#. Invalid offset present.
#: ip2k-asm.c:106
msgid "offset(IP) is not a valid form"
msgstr "偏移量（IP）不是合法格式"

#. Found something there in front of (DP) but it's out
#. of range.
#: ip2k-asm.c:154
msgid "(DP) offset out of range."
msgstr "(DP) 偏移量越界"

#. Found something there in front of (SP) but it's out
#. of range.
#: ip2k-asm.c:195
msgid "(SP) offset out of range."
msgstr "(SP) 偏移量越界。"

#: ip2k-asm.c:211
msgid "illegal use of parentheses"
msgstr "括号用法非法"

#: ip2k-asm.c:218
#, fuzzy
msgid "operand out of range (not between 1 and 255)"
msgstr "操作数越界(%ld 不在 %ld 和 %ld 之间)"

#. Something is very wrong. opindex has to be one of the above.
#: ip2k-asm.c:242
#, fuzzy
msgid "parse_addr16: invalid opindex."
msgstr "无效的‘asm’："

#: ip2k-asm.c:296
msgid "Byte address required. - must be even."
msgstr ""

#: ip2k-asm.c:305
msgid "cgen_parse_address returned a symbol. Literal required."
msgstr ""

#: ip2k-asm.c:360
#, fuzzy
msgid "percent-operator operand is not a symbol"
msgstr "%%L处的 .not. 运算符的操作数为 %s"

#: ip2k-asm.c:413
msgid "Attempt to find bit index of 0"
msgstr ""

#: ip2k-desc.c:1015
#, c-format
msgid "internal error: ip2k_cgen_rebuild_tables: conflicting insn-chunk-bitsize values: `%d' vs. `%d'"
msgstr ""

#: ip2k-desc.c:1103
#, c-format
msgid "internal error: ip2k_cgen_cpu_open: unsupported argument `%d'"
msgstr ""

#: ip2k-desc.c:1122
#, c-format
msgid "internal error: ip2k_cgen_cpu_open: no endianness specified"
msgstr ""

#: iq2000-asm.c:112 iq2000-asm.c:142
msgid "immediate value cannot be register"
msgstr "立即数不能是寄存器"

#: iq2000-asm.c:123 iq2000-asm.c:153 lm32-asm.c:70
msgid "immediate value out of range"
msgstr "立即数越界"

#: iq2000-asm.c:182
msgid "21-bit offset out of range"
msgstr "21位长的偏移量越界"

#: iq2000-desc.c:2020
#, c-format
msgid "internal error: iq2000_cgen_rebuild_tables: conflicting insn-chunk-bitsize values: `%d' vs. `%d'"
msgstr ""

#: iq2000-desc.c:2108
#, c-format
msgid "internal error: iq2000_cgen_cpu_open: unsupported argument `%d'"
msgstr ""

#: iq2000-desc.c:2127
#, c-format
msgid "internal error: iq2000_cgen_cpu_open: no endianness specified"
msgstr ""

#: lm32-asm.c:166
#, fuzzy
msgid "expecting gp relative address: gp(symbol)"
msgstr "不能使用非 GP 相对的绝对地址"

#: lm32-asm.c:196
msgid "expecting got relative address: got(symbol)"
msgstr ""

#: lm32-asm.c:226
msgid "expecting got relative address: gotoffhi16(symbol)"
msgstr ""

#: lm32-asm.c:256
msgid "expecting got relative address: gotofflo16(symbol)"
msgstr ""

#: lm32-desc.c:1002
#, c-format
msgid "internal error: lm32_cgen_rebuild_tables: conflicting insn-chunk-bitsize values: `%d' vs. `%d'"
msgstr ""

#: lm32-desc.c:1090
#, c-format
msgid "internal error: lm32_cgen_cpu_open: unsupported argument `%d'"
msgstr ""

#: lm32-desc.c:1109
#, c-format
msgid "internal error: lm32_cgen_cpu_open: no endianness specified"
msgstr ""

#: m10200-dis.c:151 m10300-dis.c:574
#, c-format
msgid "unknown\t0x%04lx"
msgstr "未知\t0x%04lx"

#: m10200-dis.c:321
#, c-format
msgid "unknown\t0x%02lx"
msgstr "未知\t0x%02lx"

#: m32c-asm.c:117
msgid "imm:6 immediate is out of range"
msgstr "imm:6 立即数越界"

#: m32c-asm.c:145
#, c-format
msgid "%dsp8() takes a symbolic address, not a number"
msgstr "%dsp8() 使用一个符号地址，而非数字"

#: m32c-asm.c:159 m32c-asm.c:163 m32c-asm.c:253
msgid "dsp:8 immediate is out of range"
msgstr "dsp:8 立即数越界"

#: m32c-asm.c:184 m32c-asm.c:188
msgid "Immediate is out of range -8 to 7"
msgstr "立即数越界 (-8 到 7)"

#: m32c-asm.c:209 m32c-asm.c:213
msgid "Immediate is out of range -7 to 8"
msgstr "立即数越界 (-7 到 8)"

#: m32c-asm.c:281
#, c-format
msgid "%dsp16() takes a symbolic address, not a number"
msgstr "%dsp16() 使用一个符号地址，而非数字"

#: m32c-asm.c:305 m32c-asm.c:312 m32c-asm.c:373
msgid "dsp:16 immediate is out of range"
msgstr "dsp:16 立即数越界"

#: m32c-asm.c:399
msgid "dsp:20 immediate is out of range"
msgstr "dsp:20 立即数越界"

#: m32c-asm.c:425 m32c-asm.c:445
msgid "dsp:24 immediate is out of range"
msgstr "dsp:24 立即数越界"

#: m32c-asm.c:478
msgid "immediate is out of range 1-2"
msgstr "立即数越界 1-2"

#: m32c-asm.c:496
msgid "immediate is out of range 1-8"
msgstr "立即数越界 1-8"

#: m32c-asm.c:514
msgid "immediate is out of range 0-7"
msgstr "立即数越界 0-7"

#: m32c-asm.c:550
msgid "immediate is out of range 2-9"
msgstr "立即数越界 2-9"

#: m32c-asm.c:568
msgid "Bit number for indexing general register is out of range 0-15"
msgstr ""

#: m32c-asm.c:606 m32c-asm.c:662
#, fuzzy
#| msgid "immediate value is out of range"
msgid "bit,base is out of range"
msgstr "立即数越界"

#: m32c-asm.c:613 m32c-asm.c:618 m32c-asm.c:666
#, fuzzy
#| msgid "21-bit offset out of range"
msgid "bit,base out of range for symbol"
msgstr "21位长的偏移量越界"

#: m32c-asm.c:802
#, fuzzy
msgid "not a valid r0l/r0h pair"
msgstr "有效的参数为：\n"

#: m32c-asm.c:832
#, fuzzy
#| msgid "invalid mask field"
msgid "Invalid size specifier"
msgstr "%s：无效的新列指定符号“%s”\n"

#: m32c-desc.c:63033
#, c-format
msgid "internal error: m32c_cgen_rebuild_tables: conflicting insn-chunk-bitsize values: `%d' vs. `%d'"
msgstr ""

#: m32c-desc.c:63121
#, c-format
msgid "internal error: m32c_cgen_cpu_open: unsupported argument `%d'"
msgstr ""

#: m32c-desc.c:63140
#, c-format
msgid "internal error: m32c_cgen_cpu_open: no endianness specified"
msgstr ""

#: m32r-desc.c:1365
#, c-format
msgid "internal error: m32r_cgen_rebuild_tables: conflicting insn-chunk-bitsize values: `%d' vs. `%d'"
msgstr ""

#: m32r-desc.c:1453
#, c-format
msgid "internal error: m32r_cgen_cpu_open: unsupported argument `%d'"
msgstr ""

#: m32r-desc.c:1472
#, c-format
msgid "internal error: m32r_cgen_cpu_open: no endianness specified"
msgstr ""

#: m68k-dis.c:1294
#, c-format
msgid "<function code %d>"
msgstr "<函数代码 %d>"

#: m68k-dis.c:1457
#, c-format
msgid "<internal error in opcode table: %s %s>\n"
msgstr "<操作数表中出现内部错误：%s %s>\n"

#: mep-asm.c:129
msgid "Only $tp or $13 allowed for this opcode"
msgstr ""

#: mep-asm.c:143
msgid "Only $sp or $15 allowed for this opcode"
msgstr ""

#: mep-asm.c:308 mep-asm.c:504
#, fuzzy, c-format
msgid "invalid %function() here"
msgstr "%qE未声明(不在函数内)"

#: mep-asm.c:336
msgid "Immediate is out of range -32768 to 32767"
msgstr "立即数越界 (-32768 到 32767)"

#: mep-asm.c:356
msgid "Immediate is out of range 0 to 65535"
msgstr "立即数越界 (0 到 65535)"

#: mep-asm.c:549 mep-asm.c:562
msgid "Immediate is out of range -512 to 511"
msgstr "立即数越界 (-512 到 511)"

#: mep-asm.c:554 mep-asm.c:563
msgid "Immediate is out of range -128 to 127"
msgstr "立即数越界 (-128 到 127)"

#: mep-asm.c:558
msgid "Value is not aligned enough"
msgstr "数值对齐程度不够"

#: mep-desc.c:6226
#, c-format
msgid "internal error: mep_cgen_rebuild_tables: conflicting insn-chunk-bitsize values: `%d' vs. `%d'"
msgstr ""

#: mep-desc.c:6314
#, c-format
msgid "internal error: mep_cgen_cpu_open: unsupported argument `%d'"
msgstr ""

#: mep-desc.c:6333
#, c-format
msgid "internal error: mep_cgen_cpu_open: no endianness specified"
msgstr ""

#: mips-dis.c:1805 mips-dis.c:2031
#, fuzzy, c-format
#| msgid "# internal error, undefined modifier(%c)"
msgid "# internal error, undefined operand in `%s %s'"
msgstr "<操作数表中出现内部错误：%s %s>\n"

#: mips-dis.c:2620
#, fuzzy
#| msgid ""
#| "\n"
#| "  aliases            Do print instruction aliases.\n"
msgid "Use canonical instruction forms.\n"
msgstr ""
"\n"
"  aliases            要打印指令别名。\n"

#: mips-dis.c:2622
#, fuzzy
#| msgid "unrecognized instruction"
msgid "Recognize MSA instructions.\n"
msgstr "无法识别的指令"

#: mips-dis.c:2624
#, fuzzy
#| msgid ""
#| "\n"
#| "  virt            Recognize the virtualization ASE instructions.\n"
msgid "Recognize the virtualization ASE instructions.\n"
msgstr ""
"\n"
"  virt            识别虚拟化 ASE 指令。\n"

#: mips-dis.c:2626
msgid ""
"Recognize the eXtended Physical Address (XPA) ASE\n"
"                  instructions.\n"
msgstr ""

#: mips-dis.c:2629
msgid "Recognize the Global INValidate (GINV) ASE instructions.\n"
msgstr ""

#: mips-dis.c:2633
msgid "Recognize the Loongson MultiMedia extensions Instructions (MMI) ASE instructions.\n"
msgstr ""

#: mips-dis.c:2637
msgid "Recognize the Loongson Content Address Memory (CAM)  instructions.\n"
msgstr ""

#: mips-dis.c:2641
msgid "Recognize the Loongson EXTensions (EXT)  instructions.\n"
msgstr ""

#: mips-dis.c:2645
msgid "Recognize the Loongson EXTensions R2 (EXT2)  instructions.\n"
msgstr ""

#: mips-dis.c:2648
#, fuzzy
#| msgid ""
#| "\n"
#| "  gpr-names=ABI            Print GPR names according to  specified ABI.\n"
#| "                           Default: based on binary being disassembled.\n"
msgid ""
"Print GPR names according to specified ABI.\n"
"                  Default: based on binary being disassembled.\n"
msgstr ""
"\n"
"  gpr-names=ABI            根据指定的 ABI 打印通用寄存器名。\n"
"                           默认：根据被反汇编的二进制文件。\n"

#: mips-dis.c:2651
#, fuzzy
#| msgid ""
#| "\n"
#| "  fpr-names=ABI            Print FPR names according to specified ABI.\n"
#| "                           Default: numeric.\n"
msgid ""
"Print FPR names according to specified ABI.\n"
"                  Default: numeric.\n"
msgstr ""
"\n"
"  fpr-names=ABI            根据指定的 ABI 打印浮点寄存器名。\n"
"                           默认：数字。\n"

#: mips-dis.c:2654
#, fuzzy
#| msgid ""
#| "\n"
#| "  cp0-names=ARCH           Print CP0 register names according to\n"
#| "                           specified architecture.\n"
#| "                           Default: based on binary being disassembled.\n"
msgid ""
"Print CP0 register names according to specified architecture.\n"
"                  Default: based on binary being disassembled.\n"
msgstr ""
"\n"
"  cp0-names=ARCH           根据指定的架构打印 CP0 寄存器名。\n"
"                           默认：根据被反汇编的二进制代码。\n"

#: mips-dis.c:2658
#, fuzzy
#| msgid ""
#| "\n"
#| "  gpr-names=ABI            Print GPR names according to  specified ABI.\n"
#| "                           Default: based on binary being disassembled.\n"
msgid ""
"Print HWR names according to specified architecture.\n"
"                  Default: based on binary being disassembled.\n"
msgstr ""
"\n"
"  gpr-names=ABI            根据指定的 ABI 打印通用寄存器名。\n"
"                           默认：根据被反汇编的二进制文件。\n"

#: mips-dis.c:2661
#, fuzzy
#| msgid ""
#| "\n"
#| "  reg-names=ABI            Print GPR and FPR names according to\n"
#| "                           specified ABI.\n"
msgid "Print GPR and FPR names according to specified ABI.\n"
msgstr ""
"\n"
"  reg-names=ABI            根据指定的 ABI 打印通用寄存器和浮点寄存\n"
"                           器名。\n"

#: mips-dis.c:2663
#, fuzzy
#| msgid ""
#| "\n"
#| "  reg-names=ARCH           Print CP0 register and HWR names according to\n"
#| "                           specified architecture.\n"
msgid ""
"Print CP0 register and HWR names according to specified\n"
"                  architecture."
msgstr ""
"\n"
"  reg-names=ARCH           根据指定的架构打印 CP0 和 HWR 寄存器名。\n"

#: mips-dis.c:2749
#, fuzzy, c-format
#| msgid ""
#| "\n"
#| "The following MIPS specific disassembler options are supported for use\n"
#| "with the -M switch (multiple options should be separated by commas):\n"
msgid ""
"\n"
"The following MIPS specific disassembler options are supported for use\n"
"with the -M switch (multiple options should be separated by commas):\n"
"\n"
msgstr ""
"\n"
"下列 MIPS 特定的反汇编器选项可通过 -M 开关启用（使用逗号分隔多个选项）：\n"

#: mips-dis.c:2783
#, fuzzy, c-format
#| msgid ""
#| "\n"
#| "  For the options above, the following values are supported for \"ABI\":\n"
#| "   "
msgid ""
"\n"
"  For the options above, the following values are supported for \"%s\":\n"
"   "
msgstr ""
"\n"
"  对于以上的选项，以下值可被用于 \"ABI\"：\n"
"   "

#: mmix-dis.c:33
#, fuzzy, c-format
msgid "bad case %d (%s) in %s:%d"
msgstr "行 %d: 不当的 no%s 数字：%d\n"

#: mmix-dis.c:42
#, c-format
msgid "internal: non-debugged code (test-case missing): %s:%d"
msgstr ""

#: mmix-dis.c:52
msgid "(unknown)"
msgstr "(未知)"

#: mmix-dis.c:247 mmix-dis.c:255
msgid "*illegal*"
msgstr ""

#: mmix-dis.c:529
#, fuzzy, c-format
msgid "*unknown operands type: %d*"
msgstr "%s：未知的重定位类型 %d"

#: msp430-decode.opc:145 rl78-decode.opc:106
#, c-format
msgid "internal error: immediate() called with invalid byte count %d"
msgstr ""

#: msp430-dis.c:59
#, c-format
msgid "Warning: disassembly unreliable - not enough bytes available"
msgstr "警告：反汇编不可靠 - 没有足够的可用字节"

#: msp430-dis.c:65
#, c-format
msgid "Error: read from memory failed"
msgstr "错误：从内存读取失败"

#: msp430-dis.c:499
#, fuzzy
msgid "Warning: illegal as emulation instr"
msgstr "不要使用 fabss 自定义指令"

#. R2/R3 are illegal as dest: may be data section.
#: msp430-dis.c:591
#, fuzzy
msgid "Warning: illegal as 2-op instr"
msgstr "不要使用 fabss 自定义指令"

#: msp430-dis.c:1002
#, fuzzy
msgid "Warning: unrecognised CALLA addressing mode"
msgstr "无效寻址模式"

#: msp430-dis.c:1303 msp430-dis.c:1324 msp430-dis.c:1345
#, c-format
msgid "Warning: reserved use of A/L and B/W bits detected"
msgstr ""

#: mt-asm.c:110 mt-asm.c:190
#, fuzzy
msgid "Operand out of range. Must be between -32768 and 32767."
msgstr "操作数越界(%lu 不在 0 和 %lu 之间)"

#: mt-asm.c:149
msgid "Biiiig Trouble in parse_imm16!"
msgstr ""

#: mt-asm.c:157
#, fuzzy
msgid "The percent-operator's operand is not a symbol"
msgstr "%%L处的 .not. 运算符的操作数为 %s"

#: mt-asm.c:395
msgid "invalid operand.  type may have values 0,1,2 only."
msgstr ""

#: mt-desc.c:1146
#, c-format
msgid "internal error: mt_cgen_rebuild_tables: conflicting insn-chunk-bitsize values: `%d' vs. `%d'"
msgstr ""

#: mt-desc.c:1234
#, c-format
msgid "internal error: mt_cgen_cpu_open: unsupported argument `%d'"
msgstr ""

#: mt-desc.c:1253
#, c-format
msgid "internal error: mt_cgen_cpu_open: no endianness specified"
msgstr ""

#: nds32-asm.c:1760
#, fuzzy, c-format
#| msgid "# internal error, undefined modifier(%c)"
msgid "internal error: unknown operand, %s"
msgstr "<操作数表中出现内部错误：%s %s>\n"

#: nds32-asm.c:2396
#, c-format
msgid "internal error: don't know how to handle parsing results"
msgstr ""

#: nds32-asm.c:2404
#, c-format
msgid "internal error: unknown hardware resource"
msgstr ""

#: nds32-dis.c:1186
msgid "insufficient data to decode instruction"
msgstr ""

#: nfp-dis.c:927
#, fuzzy
#| msgid "<illegal precision>"
msgid "<invalid_instruction>:"
msgstr "非法操作"

#: nfp-dis.c:1331
#, fuzzy
#| msgid "invalid shift operator"
msgid ", <invalid CRC operator>, "
msgstr "无效的移位操作符"

#: nfp-dis.c:1683
#, fuzzy
msgid "<invalid branch>["
msgstr "无效的数字。"

#: nfp-dis.c:2052 nfp-dis.c:2323
#, c-format
msgid "<invalid cmd target %d:%d:%d>[]"
msgstr ""

#: nfp-dis.c:2063 nfp-dis.c:2334
#, c-format
msgid "<invalid cmd action %d:%d:%d>[]"
msgstr ""

#: nfp-dis.c:2555
msgid "File has no ME-Config section."
msgstr ""

#: nfp-dis.c:2569
msgid "File has invalid ME-Config section."
msgstr ""

#: nfp-dis.c:2711
#, c-format
msgid "Error processing section %u "
msgstr ""

#: nfp-dis.c:2740
#, c-format
msgid "Invalid NFP option: %s"
msgstr ""

#: nfp-dis.c:2972
#, fuzzy, c-format
#| msgid ""
#| "\n"
#| "The following MIPS specific disassembler options are supported for use\n"
#| "with the -M switch (multiple options should be separated by commas):\n"
msgid ""
"\n"
"The following NFP specific disassembler options are supported for use\n"
"with the -M switch (multiple options should be separated by commas):\n"
msgstr ""
"\n"
"下列 MIPS 特定的反汇编器选项可通过 -M 开关启用（使用逗号分隔多个选项）：\n"

#: nfp-dis.c:2976
#, c-format
msgid ""
"\n"
"  no-pc\t\t    Don't print program counter prefix.\n"
"  ctx4\t\t    Force disassembly using 4-context mode.\n"
"  ctx8\t\t    Force 8-context mode, takes precedence."
msgstr ""

#: nios2-dis.c:135
#, c-format
msgid "out of memory"
msgstr ""

#: nios2-dis.c:263
#, fuzzy, c-format
#| msgid "<internal error in opcode table: %s %s>\n"
msgid "internal error: broken opcode descriptor for `%s %s'"
msgstr "<操作数表中出现内部错误：%s %s>\n"

#. I and Z are output operands and can`t be immediate
#. A is an address and we can`t have the address of
#. an immediate either. We don't know how much to increase
#. aoffsetp by since whatever generated this is broken
#. anyway!
#: ns32k-dis.c:533
#, c-format
msgid "$<undefined>"
msgstr "$<未定义>"

#: or1k-asm.c:55
msgid "relocation invalid for store"
msgstr ""

#: or1k-asm.c:56
msgid "internal relocation type invalid"
msgstr ""

#: or1k-desc.c:2040
#, c-format
msgid "internal error: or1k_cgen_rebuild_tables: conflicting insn-chunk-bitsize values: `%d' vs. `%d'"
msgstr ""

#: or1k-desc.c:2128
#, c-format
msgid "internal error: or1k_cgen_cpu_open: unsupported argument `%d'"
msgstr ""

#: or1k-desc.c:2147
#, c-format
msgid "internal error: or1k_cgen_cpu_open: no endianness specified"
msgstr ""

#: ppc-dis.c:386
#, fuzzy, c-format
msgid "warning: ignoring unknown -M%s option"
msgstr "警告：忽略--strip-program 选项，因为-s 选项没有指明"

#: ppc-dis.c:977
#, c-format
msgid ""
"\n"
"The following PPC specific disassembler options are supported for use with\n"
"the -M switch:\n"
msgstr ""
"\n"
"下列 PPC 特定的反汇编器选项在使用 -M 开关时可用（使用逗号分隔多个选项）：\n"

#: ppc-opc.c:51 ppc-opc.c:74 ppc-opc.c:100 ppc-opc.c:130
msgid "invalid register"
msgstr "无效的寄存器"

#: ppc-opc.c:396
msgid "invalid conditional option"
msgstr "无效的条件选项"

#: ppc-opc.c:399
#, fuzzy
msgid "invalid counter access"
msgstr "没有访问权限"

#: ppc-opc.c:463
msgid "BO value implies no branch hint, when using + or - modifier"
msgstr ""

#: ppc-opc.c:468
msgid "attempt to set y bit when using + or - modifier"
msgstr ""

#: ppc-opc.c:470
msgid "attempt to set 'at' bits when using + or - modifier"
msgstr ""

#: ppc-opc.c:677
#, fuzzy
#| msgid "invalid shift operator"
msgid "invalid R operand"
msgstr "无效的移位操作符"

#: ppc-opc.c:732
msgid "invalid mask field"
msgstr "无效的掩码字段"

#: ppc-opc.c:755
#, fuzzy
msgid "invalid mfcr mask"
msgstr "无效的掩码字段"

#: ppc-opc.c:873 ppc-opc.c:891
#, fuzzy
msgid "illegal L operand value"
msgstr "立即数"

#: ppc-opc.c:914
#, fuzzy
msgid "illegal WC operand value"
msgstr "立即数"

#: ppc-opc.c:1011
msgid "incompatible L operand value"
msgstr ""

#: ppc-opc.c:1051 ppc-opc.c:1086
msgid "illegal bitmask"
msgstr "非法的位掩码"

#: ppc-opc.c:1173
#, fuzzy
msgid "address register in load range"
msgstr "地址中无寄存器"

#: ppc-opc.c:1213
#, fuzzy
msgid "illegal PL operand value"
msgstr "立即数"

#: ppc-opc.c:1274
#, fuzzy
msgid "index register in load range"
msgstr "寄存器元素下标"

#: ppc-opc.c:1303 ppc-opc.c:1389
msgid "source and target register operands must be different"
msgstr ""

#: ppc-opc.c:1334
msgid "invalid register operand when updating"
msgstr ""

#: ppc-opc.c:1452
msgid "illegal immediate value"
msgstr "非法的立即数"

#: ppc-opc.c:1557
#, fuzzy
msgid "invalid bat number"
msgstr "无效的数字。"

#: ppc-opc.c:1592
#, fuzzy
msgid "invalid sprg number"
msgstr "无效的数字。"

#: ppc-opc.c:1629
#, fuzzy
msgid "invalid tbr number"
msgstr "无效的数字。"

#: ppc-opc.c:1715 ppc-opc.c:1761
msgid "VSR overlaps ACC operand"
msgstr ""

#: ppc-opc.c:1868
#, fuzzy
#| msgid "invalid conditional option"
msgid "invalid constant"
msgstr "%<#pragma pack%>中有无效常量 - 已忽略"

#: ppc-opc.c:1970 ppc-opc.c:1993 ppc-opc.c:2016 ppc-opc.c:2039
msgid "UIMM = 00000 is illegal"
msgstr ""

#: ppc-opc.c:2062
msgid "UIMM values >7 are illegal"
msgstr ""

#: ppc-opc.c:2085
msgid "UIMM values >15 are illegal"
msgstr ""

#: ppc-opc.c:2108
msgid "GPR odd is illegal"
msgstr ""

#: ppc-opc.c:2131 ppc-opc.c:2154
#, fuzzy
#| msgid "invalid register offset"
msgid "invalid offset"
msgstr "无效的寄存器偏移量"

#: ppc-opc.c:2177
#, fuzzy
msgid "invalid Ddd value"
msgstr "无效的数字。"

#. The option without '=' should be defined above.
#: riscv-dis.c:85 riscv-dis.c:109
#, fuzzy, c-format
#| msgid "Unrecognised disassembler option: %s\n"
msgid "unrecognized disassembler option: %s"
msgstr "无法识别的反汇编器选项：%s\n"

#. Invalid options with '=', no option name before '=',
#. and no value after '='.
#: riscv-dis.c:93
#, fuzzy, c-format
#| msgid "Unrecognised disassembler option: %s\n"
msgid "unrecognized disassembler option with '=': %s"
msgstr "无法识别的反汇编器选项：%s\n"

#: riscv-dis.c:103
#, c-format
msgid "unknown privilege spec set by %s=%s"
msgstr ""

#: riscv-dis.c:406
#, fuzzy, c-format
#| msgid "# internal error, undefined modifier(%c)"
msgid "# internal error, undefined modifier (%c)"
msgstr "<操作数表中出现内部错误：%s %s>\n"

#: riscv-dis.c:605
#, fuzzy, c-format
#| msgid ""
#| "\n"
#| "The following MIPS specific disassembler options are supported for use\n"
#| "with the -M switch (multiple options should be separated by commas):\n"
msgid ""
"\n"
"The following RISC-V-specific disassembler options are supported for use\n"
"with the -M switch (multiple options should be separated by commas):\n"
msgstr ""
"\n"
"下列 MIPS 特定的反汇编器选项可通过 -M 开关启用（使用逗号分隔多个选项）：\n"

#: riscv-dis.c:609
#, c-format
msgid ""
"\n"
"  numeric         Print numeric register names, rather than ABI names.\n"
msgstr ""

#: riscv-dis.c:612
#, c-format
msgid ""
"\n"
"  no-aliases      Disassemble only into canonical instructions, rather\n"
"                  than into pseudoinstructions.\n"
msgstr ""

#: riscv-dis.c:616
#, c-format
msgid ""
"\n"
"  priv-spec=PRIV  Print the CSR according to the chosen privilege spec\n"
"                  (1.9, 1.9.1, 1.10, 1.11).\n"
msgstr ""

#: rx-dis.c:139 rx-dis.c:163 rx-dis.c:171 rx-dis.c:179 rx-dis.c:187
#, fuzzy
#| msgid "invalid register name"
msgid "<invalid register number>"
msgstr "无效寄存器名"

#: rx-dis.c:147 rx-dis.c:195
#, fuzzy
#| msgid "invalid conditional option"
msgid "<invalid condition code>"
msgstr "无效的条件选项"

#: rx-dis.c:155
#, fuzzy
msgid "<invalid flag>"
msgstr "无效的掩码字段"

#: rx-dis.c:203
#, fuzzy
#| msgid "invalid register offset"
msgid "<invalid opsize>"
msgstr "无效的寄存器偏移量"

#: rx-dis.c:211
#, fuzzy
#| msgid "invalid register offset"
msgid "<invalid size>"
msgstr "无效的寄存器偏移量"

#: s12z-dis.c:251 s12z-dis.c:308 s12z-dis.c:319
#, fuzzy
#| msgid "<illegal precision>"
msgid "<illegal reg num>"
msgstr "<非法的精度>"

#: s12z-dis.c:382
msgid "<bad>"
msgstr ""

#: s12z-dis.c:392
msgid ".<bad>"
msgstr ""

#: s390-dis.c:42
#, fuzzy
#| msgid "  esa         Disassemble in ESA architecture mode\n"
msgid "Disassemble in ESA architecture mode"
msgstr "  esa         在 ESA 架构模式下反汇编\n"

#: s390-dis.c:43
#, fuzzy
msgid "Disassemble in z/Architecture mode"
msgstr "z/Architecture 模式在 %s 上不受支持"

#: s390-dis.c:44
msgid "Print unknown instructions according to length from first two bits"
msgstr ""

#: s390-dis.c:76
#, fuzzy, c-format
#| msgid "Unrecognised disassembler option: %s\n"
msgid "unknown S/390 disassembler option: %s"
msgstr "无法识别的反汇编器选项：%s\n"

#: s390-dis.c:416
#, c-format
msgid ""
"\n"
"The following S/390 specific disassembler options are supported for use\n"
"with the -M switch (multiple options should be separated by commas):\n"
msgstr ""
"\n"
"\n"
"下列 S/390 特定的反汇编器选项可通过 -M 开关启用（使用逗号分隔多个选项）：\n"

#: score-dis.c:661 score-dis.c:879 score-dis.c:1040 score-dis.c:1146
#: score-dis.c:1154 score-dis.c:1161 score7-dis.c:695 score7-dis.c:858
#, fuzzy
#| msgid "<illegal precision>"
msgid "<illegal instruction>"
msgstr "非法操作"

#: sparc-dis.c:308 sparc-dis.c:318
#, fuzzy, c-format
#| msgid "Internal error: bad sparc-opcode.h: \"%s\", %#.8lx, %#.8lx\n"
msgid "internal error: bad sparc-opcode.h: \"%s\", %#.8lx, %#.8lx\n"
msgstr "内部错误：错误的 sparc-opcode.h：“%s”，%#.8lx，%#.8lx\n"

#: sparc-dis.c:377
#, fuzzy, c-format
msgid "internal error: bad sparc-opcode.h: \"%s\" == \"%s\"\n"
msgstr "内部错误：错误的 sparc-opcode.h：“%s”，%#.8lx，%#.8lx\n"

#. Mark as non-valid instruction.
#: sparc-dis.c:1094
msgid "unknown"
msgstr "未知"

#: v850-dis.c:190
#, fuzzy
msgid "<invalid s-reg number>"
msgstr "无效的数字。"

#: v850-dis.c:206
#, fuzzy
msgid "<invalid reg number>"
msgstr "无效的数字。"

#: v850-dis.c:222
#, fuzzy
msgid "<invalid v-reg number>"
msgstr "无效的数字。"

#: v850-dis.c:236
#, fuzzy
msgid "<invalid CC-reg number>"
msgstr "无效的数字。"

#: v850-dis.c:250
#, fuzzy
msgid "<invalid float-CC-reg number>"
msgstr "无效的数字。"

#: v850-dis.c:264
#, fuzzy
msgid "<invalid cacheop number>"
msgstr "无效的数字。"

#: v850-dis.c:275
#, fuzzy
msgid "<invalid prefop number>"
msgstr "无效的数字。"

#: v850-dis.c:510
#, fuzzy, c-format
msgid "unknown operand shift: %x"
msgstr "<未知>：%x"

#: v850-dis.c:526
#, fuzzy, c-format
#| msgid "unknown pop reg: %d\n"
msgid "unknown reg: %d"
msgstr "<未知>：%d"

#. The functions used to insert and extract complicated operands.
#. Note: There is a conspiracy between these functions and
#. v850_insert_operand() in gas/config/tc-v850.c.  Error messages
#. containing the string 'out of range' will be ignored unless a
#. specific command line option is given to GAS.
#: v850-opc.c:53
#, fuzzy
msgid "displacement value is not in range and is not aligned"
msgstr "偏移值越界"

#: v850-opc.c:54
msgid "displacement value is out of range"
msgstr "偏移值越界"

#: v850-opc.c:55
msgid "displacement value is not aligned"
msgstr "偏移值未对齐"

#: v850-opc.c:57
msgid "immediate value is out of range"
msgstr "立即数越界"

#: v850-opc.c:58
msgid "branch value out of range"
msgstr "跳转越界"

#: v850-opc.c:59
msgid "branch value not in range and to odd offset"
msgstr "跳转越界且跳转偏移量为奇数"

#: v850-opc.c:60
msgid "branch to odd offset"
msgstr "跳转偏移量为奇数"

#: v850-opc.c:61
#, fuzzy
#| msgid "immediate value is out of range"
msgid "position value is out of range"
msgstr "立即数越界"

#: v850-opc.c:62
#, fuzzy
#| msgid "immediate value is out of range"
msgid "width value is out of range"
msgstr "立即数越界"

#: v850-opc.c:63
#, fuzzy
#| msgid "value out of range"
msgid "SelID is out of range"
msgstr "SR/SelID 越界"

#: v850-opc.c:64
msgid "vector8 is out of range"
msgstr "vector8 越界"

#: v850-opc.c:65
msgid "vector5 is out of range"
msgstr "vector5 越界"

#: v850-opc.c:66
msgid "imm10 is out of range"
msgstr "imm10 越界"

#: v850-opc.c:67
msgid "SR/SelID is out of range"
msgstr "SR/SelID 越界"

#: v850-opc.c:512
msgid "invalid register for stack adjustment"
msgstr "用于调整堆栈的寄存器无效"

#: v850-opc.c:532
msgid "invalid register name"
msgstr "无效寄存器名"

#: wasm32-dis.c:88
#, fuzzy
#| msgid "invalid register name"
msgid "Disassemble \"register\" names"
msgstr "无效寄存器名"

#: wasm32-dis.c:89
msgid "Name well-known globals"
msgstr ""

#: wasm32-dis.c:537
#, fuzzy, c-format
#| msgid ""
#| "\n"
#| "The following ARM specific disassembler options are supported for use with\n"
#| "the -M switch:\n"
msgid ""
"The following WebAssembly-specific disassembler options are supported for use\n"
"with the -M switch:\n"
msgstr ""
"\n"
"下列 ARM 特定的反汇编器选项可通过 -M 开关启用：\n"

#: xc16x-asm.c:66
msgid "Missing '#' prefix"
msgstr "缺失 '#' 前缀"

#: xc16x-asm.c:82
msgid "Missing '.' prefix"
msgstr "缺失 '.' 前缀"

#: xc16x-asm.c:98
msgid "Missing 'pof:' prefix"
msgstr "缺失 'pof:' 前缀"

#: xc16x-asm.c:114
msgid "Missing 'pag:' prefix"
msgstr "缺失 'pag:' 前缀"

#: xc16x-asm.c:130
msgid "Missing 'sof:' prefix"
msgstr "缺失 'sof:' 前缀"

#: xc16x-asm.c:146
msgid "Missing 'seg:' prefix"
msgstr "缺失 'seg:' 前缀"

#: xc16x-desc.c:3349
#, c-format
msgid "internal error: xc16x_cgen_rebuild_tables: conflicting insn-chunk-bitsize values: `%d' vs. `%d'"
msgstr ""

#: xc16x-desc.c:3437
#, c-format
msgid "internal error: xc16x_cgen_cpu_open: unsupported argument `%d'"
msgstr ""

#: xc16x-desc.c:3456
#, c-format
msgid "internal error: xc16x_cgen_cpu_open: no endianness specified"
msgstr ""

#: xstormy16-asm.c:71
msgid "Bad register in preincrement"
msgstr "前置自增中使用了错误的寄存器"

#: xstormy16-asm.c:76
msgid "Bad register in postincrement"
msgstr "后置自增中使用了错误的寄存器"

#: xstormy16-asm.c:78
msgid "Bad register name"
msgstr "错误的寄存器名"

#: xstormy16-asm.c:82
msgid "Label conflicts with register name"
msgstr "标号与寄存器名冲突"

#: xstormy16-asm.c:86
msgid "Label conflicts with `Rx'"
msgstr "标号与‘Rx’冲突"

#: xstormy16-asm.c:88
msgid "Bad immediate expression"
msgstr "错误的立即数表达式"

#: xstormy16-asm.c:109
#, fuzzy
msgid "No relocation for small immediate"
msgstr "立即数"

#: xstormy16-asm.c:119
#, fuzzy
msgid "Small operand was not an immediate number"
msgstr "符号被用作立即操作数"

#: xstormy16-asm.c:157
msgid "Operand is not a symbol"
msgstr "操作数不是一个符号"

#: xstormy16-asm.c:165
msgid "Syntax error: No trailing ')'"
msgstr "语法错误：没有结尾的‘)’"

#: xstormy16-desc.c:1317
#, c-format
msgid "internal error: xstormy16_cgen_rebuild_tables: conflicting insn-chunk-bitsize values: `%d' vs. `%d'"
msgstr ""

#: xstormy16-desc.c:1405
#, c-format
msgid "internal error: xstormy16_cgen_cpu_open: unsupported argument `%d'"
msgstr ""

#: xstormy16-desc.c:1424
#, c-format
msgid "internal error: xstormy16_cgen_cpu_open: no endianness specified"
msgstr ""

#~ msgid "Internal disassembler error"
#~ msgstr "反汇编器内部错误"

#, fuzzy
#~ msgid "can't cope with insert %d\n"
#~ msgstr "无法清除未激活的密钥 %d。\n"

#~ msgid "%02x\t\t*unknown*"
#~ msgstr "%02x\t\t*未知*"

#, fuzzy
#~ msgid "can't find i386-opc.tbl for reading, errno = %s\n"
#~ msgstr "找不到阅读，errno i386 opc.tbl = %s"

#~ msgid "# <dis error: %08lx>"
#~ msgstr "# <反汇编出错: %08lx>"

#, fuzzy
#~| msgid ""
#~| "\n"
#~| "  msa             Recognize MSA instructions.\n"
#~ msgid ""
#~ "\n"
#~ "  msa                      Recognize MSA instructions.\n"
#~ msgstr ""
#~ "\n"
#~ "  msa             识别 MSA 指令。\n"

#, fuzzy
#~| msgid ""
#~| "\n"
#~| "  hwr-names=ARCH           Print HWR names according to specified \n"
#~| "\t\t\t   architecture.\n"
#~| "                           Default: based on binary being disassembled.\n"
#~ msgid ""
#~ "\n"
#~ "  hwr-names=ARCH           Print HWR names according to specified \n"
#~ "                           architecture.\n"
#~ "                           Default: based on binary being disassembled.\n"
#~ msgstr ""
#~ "\n"
#~ "  hwr-names=ARCH           根据指定的架构打印 HWR 寄存器名。\n"
#~ "                           默认：根据被反汇编的二进制代码。\n"

#~ msgid ""
#~ "\n"
#~ "  For the options above, The following values are supported for \"ARCH\":\n"
#~ "   "
#~ msgstr ""
#~ "\n"
#~ "  对于以上的选项，以下值可被用于 \"ARCH\"：\n"
#~ "   "

#~ msgid "Internal error:  bad sparc-opcode.h: \"%s\", %#.8lx, %#.8lx\n"
#~ msgstr "内部错误：错误的 sparc-opcode.h：“%s”，%#.8lx，%#.8lx\n"

#, fuzzy
#~ msgid "Illegal limm reference in last instruction!\n"
#~ msgstr "在最后一条指令的非法住参考!"

#, fuzzy
#~ msgid "unable to fit different valued constants into instruction"
#~ msgstr "无法融入教学的不同值的常数"

#, fuzzy
#~ msgid "auxiliary register not allowed here"
#~ msgstr "在这里不允许使用%<#pragma%>"

#, fuzzy
#~ msgid "too many long constants"
#~ msgstr "实参太多"

#, fuzzy
#~ msgid "too many shimms in load"
#~ msgstr "重复行过多"

#, fuzzy
#~ msgid "impossible store"
#~ msgstr "STORE"

#, fuzzy
#~ msgid "st operand error"
#~ msgstr ""
#~ "\n"
#~ "错误: ILL_ILLOPN (不合法的算符)"

#, fuzzy
#~ msgid "address writeback not allowed"
#~ msgstr "意外的地址写回"

#, fuzzy
#~ msgid "invalid load/shimm insn"
#~ msgstr "无效指令："

#, fuzzy
#~ msgid "ld operand error"
#~ msgstr ""
#~ "\n"
#~ "错误: ILL_ILLOPN (不合法的算符)"

#, fuzzy
#~ msgid "jump flags, but no .f seen"
#~ msgstr "   -f --as-flags <flags>     把 <flags> 传递给汇编程序。\n"

#, fuzzy
#~ msgid "jump flags, but no limm addr"
#~ msgstr "跳的旗帜，但没有住地址"

#, fuzzy
#~ msgid "flag bits of jump address limm lost"
#~ msgstr "标志位的跳转地址住失去了"

#, fuzzy
#~ msgid "attempt to set HR bits"
#~ msgstr "<无法识别的标志位集合>"

#, fuzzy
#~ msgid "bad jump flags value"
#~ msgstr "错误的ai_flags 值"

#, fuzzy
#~ msgid "branch address not on 4 byte boundary"
#~ msgstr "将函数强行对齐到 4 字节边界上"

#, fuzzy
#~ msgid "must specify .jd or no nullify suffix"
#~ msgstr "必须指定.jd 或无 nullify 后缀"

#~ msgid "unknown\t0x%04x"
#~ msgstr "未知\t0x%04x"

#~ msgid "offset not a multiple of 2"
#~ msgstr "偏移量不是 2 的倍数"

#~ msgid "offset greater than 62"
#~ msgstr "偏移量大于 62"

#~ msgid "offset not a multiple of 4"
#~ msgstr "偏移量不是 4 的倍数"

#~ msgid "offset greater than 124"
#~ msgstr "偏移量大于 124"

#~ msgid "offset not a multiple of 8"
#~ msgstr "偏移量不是 8 的倍数"

#~ msgid "offset greater than 248"
#~ msgstr "偏移量大于 248"

#~ msgid "offset not between -2048 and 2047"
#~ msgstr "偏移量不在 -2048 和 2047 之间"

#~ msgid "offset not between -8192 and 8191"
#~ msgstr "偏移量不在 -8192 和 8191 之间"

#~ msgid "target register operand must be even"
#~ msgstr "目的寄存器操作数必须是偶数"

#~ msgid "source register operand must be even"
#~ msgstr "源寄存器操作数必须是偶数"

#~ msgid "branch value not in range and to an odd offset"
#~ msgstr "跳转越界且跳转偏移量为奇数"

#~ msgid "immediate value not in range and not even"
#~ msgstr "立即数越界且不是偶数"