# Chinese translations for sharutils package.
# Copyright (C) 2008 Free Software Foundation, Inc.
# This file is distributed under the same license as the sharutils package.
# Ji ZhengYu <zhengyuji@gmail.com>, 2010, 2011.
msgid ""
msgstr ""
"Project-Id-Version: sharutils 4.11\n"
"Report-Msgid-Bugs-To: bug-gnu-utils@gnu.org\n"
"POT-Creation-Date: 2011-02-05 11:12-0800\n"
"PO-Revision-Date: 2011-04-28 20:44+0800\n"
"Last-Translator: Ji ZhengYu <zhengyuji@gmail.com>\n"
"Language-Team: Chinese (simplified) <i18n-zh@googlegroups.com>\n"
"Language: zh_CN\n"
"X-Bugs: Report translation errors to the Language-Team address.\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"

#: lib/error.c:181
msgid "Unknown system error"
msgstr "未知的系统错误"

#: lib/getopt.c:527 lib/getopt.c:543
#, c-format
msgid "%s: option '%s' is ambiguous\n"
msgstr "%s: 选项\"%s\"有歧义\n"

#: lib/getopt.c:576 lib/getopt.c:580
#, c-format
msgid "%s: option '--%s' doesn't allow an argument\n"
msgstr "%s: 选项\"--%s\"不要参数\n"

#: lib/getopt.c:589 lib/getopt.c:594
#, c-format
msgid "%s: option '%c%s' doesn't allow an argument\n"
msgstr "%s: 选项\"%c%s\"不要参数\n"

#: lib/getopt.c:637 lib/getopt.c:656
#, c-format
msgid "%s: option '--%s' requires an argument\n"
msgstr "%s: 选项\"--%s\"必须带参数\n"

#: lib/getopt.c:694 lib/getopt.c:697
#, c-format
msgid "%s: unrecognized option '--%s'\n"
msgstr "%s: 未知选项\"--%s\"\n"

#: lib/getopt.c:705 lib/getopt.c:708
#, c-format
msgid "%s: unrecognized option '%c%s'\n"
msgstr "%s: 无法识别的选项\"%c%s\"\n"

#: lib/getopt.c:757 lib/getopt.c:760
#, c-format
msgid "%s: invalid option -- '%c'\n"
msgstr "%s: 无效选项 -- \"%c\"\n"

#: lib/getopt.c:810 lib/getopt.c:827 lib/getopt.c:1035 lib/getopt.c:1053
#, c-format
msgid "%s: option requires an argument -- '%c'\n"
msgstr "%s: 选项需要参数 -- \"%c\"\n"

#: lib/getopt.c:883 lib/getopt.c:899
#, c-format
msgid "%s: option '-W %s' is ambiguous\n"
msgstr "%s: 选项\"-W %s\"有歧义\n"

#: lib/getopt.c:923 lib/getopt.c:941
#, c-format
msgid "%s: option '-W %s' doesn't allow an argument\n"
msgstr "%s: 选项\"-W %s\"不要参数\n"

#: lib/getopt.c:962 lib/getopt.c:980
#, c-format
msgid "%s: option '-W %s' requires an argument\n"
msgstr "%s: 选项\"-W %s\"必须带参数\n"

#: src/shar.c:416
#, c-format
msgid "printf formatting error:  %s\n"
msgstr "printf 格式错误: %s\n"

#: src/shar.c:467
#, c-format
msgid "sharutils bug - no status\n"
msgstr "sharutilfs 错误 - 无状态\n"

#: src/shar.c:823
#, c-format
msgid "Too many directories for mkdir generation"
msgstr "mkdir 不能生成过多的目录"

#: src/shar.c:906 src/shar.c:1573
#, c-format
msgid "Cannot access %s"
msgstr "无法访问 %s"

#: src/shar.c:956
#, c-format
msgid "-C is being deprecated, use -Z instead"
msgstr "不要再用 -C 了，用 -Z 代替"

#: src/shar.c:997 src/unshar.c:375
#, c-format
msgid "Cannot get current directory name"
msgstr "无法获取当前目录名"

#: src/shar.c:1066 src/shar.c:1388
#, c-format
msgid "New file, remaining %s, "
msgstr "新建文件，剩余大小 %s 字节，"

#: src/shar.c:1067 src/shar.c:1389
#, c-format
msgid "Limit still %s\n"
msgstr "还有 %s 字节限制\n"

#: src/shar.c:1090 src/shar.c:1471
#, c-format
msgid "Starting file %s\n"
msgstr "从文件 %s 开始\n"

#: src/shar.c:1141
#, c-format
msgid "Could not popen 'wc' command:  %s\n"
msgstr "无法 popen \"wc\" 命令: %s\n"

#: src/shar.c:1202
#, c-format
msgid "Cannot open file %s"
msgstr "无法打开文件 %s"

#: src/shar.c:1257
#, c-format
msgid "popen(3) on: %s"
msgstr "popen(3): %s"

#: src/shar.c:1280
#, c-format
msgid "fopen(3) of file %s"
msgstr "fopen(3) 文件 %s"

#: src/shar.c:1332
msgid "text"
msgstr "文本文件"

#: src/shar.c:1342
msgid "compressed"
msgstr "compress 压缩过的文件"

#: src/shar.c:1343
msgid "gzipped"
msgstr "gzip 压缩过的文件"

#: src/shar.c:1344
msgid "bzipped"
msgstr "bzip 压缩过的文件"

#: src/shar.c:1345
msgid "binary"
msgstr "二进制文件"

#: src/shar.c:1356
#, c-format
msgid "pipe(2) failed"
msgstr "pipe(2) 失败"

#: src/shar.c:1367
#, c-format
msgid "Could not fork"
msgstr "无法派生子进程"

#: src/shar.c:1379
#, c-format
msgid "File %s (%s)"
msgstr "文件 %s (%s)"

#: src/shar.c:1568
#, c-format
msgid "%s: Not a regular file"
msgstr "%s: 不是个普通文件"

#: src/shar.c:1588
#, c-format
msgid "In shar: remaining size %s\n"
msgstr "In shar: 剩余 %s 字节\n"

#: src/shar.c:1606
msgid "empty"
msgstr "空文件"

#: src/shar.c:1649
#, c-format
msgid "Saving %s (%s)"
msgstr "保存 %s (%s)"

#: src/shar.c:1869
#, c-format
msgid "allocating output file name"
msgstr "正在分派输出文件名"

#: src/shar.c:1875
#, c-format
msgid "Opening `%s'"
msgstr "正在打开‘%s’"

#: src/shar.c:1886
#, c-format
msgid "Closing `%s'"
msgstr "关闭‘%s’"

#: src/shar.c:1897 src/unshar.c:311 src/uudecode.c:460 src/uuencode.c:202
#, c-format
msgid "Try `%s --help' for more information.\n"
msgstr "尝试用‘%s --help’获取更多信息。\n"

#: src/shar.c:1901 src/unshar.c:315
#, c-format
msgid "Usage: %s [OPTION]... [FILE]...\n"
msgstr "用法: %s [选项]... [文件名]...\n"

#: src/shar.c:1902
msgid ""
"Mandatory arguments to long options are mandatory for short options too.\n"
"\n"
"Giving feedback:\n"
"      --help              display this help and exit\n"
"      --version           output version information and exit\n"
"  -q, --quiet, --silent   do not output verbose messages locally\n"
"\n"
"Selecting files:\n"
msgstr ""
"完整选项所需的参数对于选项简写形式也是必须的。\n"
"\n"
"输出反馈:\n"
"      --help              显示此帮助并退出\n"
"      --version           输出版本信息并退出\n"
"  -q, --quiet, --silent   不要输出详细的局部信息\n"
"\n"
"选择文件:\n"

#: src/shar.c:1913
msgid "  -p, --intermix-type     allow -[BTzZ] in file lists to change mode\n"
msgstr "  -p, --intermix-type     允许在文件列表中使用 -[BTzZ] 来改变压缩处理模式\n"

#: src/shar.c:1917
msgid "  -p, --intermix-type     allow -[BTz] in file lists to change mode\n"
msgstr "  -p, --intermix-type     允许在文件列表中使用 -[BTz] 来改变压缩处理模式\n"

#: src/shar.c:1921
msgid ""
"  -S, --stdin-file-list   read file list from standard input\n"
"\n"
"Splitting output:\n"
"  -o, --output-prefix=PREFIX    output to file PREFIX.01 through PREFIX.NN\n"
"  -l, --whole-size-limit=SIZE   split archive, not files, to SIZE kilobytes\n"
"  -L, --split-size-limit=SIZE   split archive, or files, to SIZE kilobytes\n"
"\n"
"Controlling the shar headers:\n"
"  -n, --archive-name=NAME   use NAME to document the archive\n"
"  -s, --submitter=ADDRESS   override the submitter name\n"
"  -a, --net-headers         output Submitted-by: & Archive-name: headers\n"
"  -c, --cut-mark            start the shar with a cut line\n"
"  -t, --translate           translate messages in the script\n"
"\n"
"Selecting how files are stocked:\n"
"  -M, --mixed-uuencode         dynamically decide uuencoding (default)\n"
"  -T, --text-files             treat all files as text\n"
"  -B, --uuencode               treat all files as binary, use uuencode\n"
"  -z, --gzip                   gzip and uuencode all files\n"
"  -g, --level-for-gzip=LEVEL   pass -LEVEL (default 9) to gzip\n"
"  -j, --bzip2                  bzip2 and uuencode all files\n"
msgstr ""
"  -S, --stdin-file-list     从标准输入中读取文件列表\n"
"\n"
"分割输出:\n"
"  -o, --output-prefix=PREFIX   输入至文件 PREFIX.01 至 PREFIX.NN\n"
"  -l, --whole-size-limit=SIZE  分割归档包(非文件)为 SIZE KB\n"
"  -L, --split-size-limit=SIZE  分割归档包或文件为 SIZE KB\n"
"\n"
"控制 shar 头部:\n"
"  -n, --archive-name=NAME   使用 NAME 命名归档文件\n"
"  -s, --submitter=ADDRESS   覆盖提交者姓名\n"
"  -a, --net-headers         输出 Submitted-by: 和 Archive-name: headers\n"
"  -c, --cut-mark            以切割记号开始一个 shar 归档\n"
"  -t, --translate           在脚本中翻译信息\n"
"\n"
"选择文件的保存方式:\n"
"  -M, --mixed-uuencode         动态决定是否用 uuencode (默认)\n"
"  -T, --text-files             把所有文件都认为是文本文件\n"
"  -B, --uuencode               把所有文件都认为是二进制文件，使用 uuencode\n"
"  -z, --gzip                   用 gzip 和 uuencode 处理所有文件\n"
"  -g, --level-for-gzip=LEVEL   传递 -LEVEL (默认 9) 至 gzip\n"
"  -j, --bzip2                  用 bzip2 和 uuencode 处理所有文件\n"

#: src/shar.c:1945
msgid ""
"  -Z, --compress               compress and uuencode all files\n"
"  -b, --bits-per-code=BITS     pass -bBITS (default 12) to compress\n"
msgstr ""
"  -Z, --compress               用 compress 和 uuencode 处理所有文件\n"
"  -b, --bits-per-code=BITS     传递 -bBITS (默认 12) 至 compress\n"

#: src/shar.c:1950
msgid ""
"\n"
"Protecting against transmission:\n"
"  -w, --no-character-count      do not use `wc -c' to check size\n"
"  -D, --no-md5-digest           do not use `md5sum' digest to verify\n"
"  -F, --force-prefix            force the prefix character on every line\n"
"  -d, --here-delimiter=STRING   use STRING to delimit the files in the shar\n"
"\n"
"Producing different kinds of shars:\n"
"  -V, --vanilla-operation   produce very simple and undemanding shars\n"
"  -P, --no-piping           exclusively use temporary files at unshar time\n"
"  -x, --no-check-existing   blindly overwrite existing files\n"
"  -X, --query-user          ask user before overwriting files (not for Net)\n"
"  -m, --no-timestamp        do not restore file modification dates & times\n"
"  -Q, --quiet-unshar        avoid verbose messages at unshar time\n"
"  -f, --basename            restore in one directory, despite hierarchy\n"
"      --no-i18n             do not produce internationalized shell script\n"
msgstr ""
"\n"
"传送保护:\n"
"  -w, --no-character-count      不要用‘wc -c’检查大小\n"
"  -D, --no-md5-digest           不要用‘md5sum’校验\n"
"  -F, --force-prefix            强制每行开头前缀字符\n"
"  -d, --here-delimiter=STRING   用 STRING 界定 shar 中的文件\n"
"\n"
"生成不同种类的 shars:\n"
"  -V, --vanilla-operation   生成简单且无要求的 shars\n"
"  -P, --no-piping           在 unshar 时专门使用临时文件\n"
"  -x, --no-check-existing   强制覆盖存在的文件\n"
"  -X, --query-user          覆盖文件前询问用户 (网络文件无效)\n"
"  -m, --no-timestamp        不还原文件修改日期和时间\n"
"  -Q, --quiet-unshar        在 unshar 时不要输出详细的信息\n"
"  -f, --basename            即使有目录层次关系还是还原在同一个目录下\n"
"      --no-i18n             不生成国际化的 shell 脚本\n"

#: src/shar.c:1968
msgid ""
"\n"
"Option -o is required with -l or -L, option -n is required with -a.\n"
msgstr ""
"\n"
"-l 或是 -L 选项需要选项 -o，-a 选项需要 -n 选项。\n"

#: src/shar.c:1972
msgid "Option -g implies -z, option -b implies -Z.\n"
msgstr "-g 选项隐含了 -z 选项，-b 选项隐含了 -Z 选项。\n"

#: src/shar.c:1975
msgid "Option -g implies -z.\n"
msgstr "-g 选项隐含了 -z 选项。\n"

#. TRANSLATORS: add the contact address for your translation team!
#: src/shar.c:1979 src/unshar.c:330 src/uudecode.c:471 src/uuencode.c:212
#, c-format
msgid "Report bugs to <%s>.\n"
msgstr "发送错误报告至 <%s>。发送翻译错误至 “Chinese (simplified) <translation-team-zh-cn@lists.sourceforge.net>”。\n"

#: src/shar.c:1996
#, c-format
msgid "invalid file size limit `%s'"
msgstr "无效的文件大小限制‘%s’"

#: src/shar.c:2032
#, c-format
msgid "invalid format (count field too wide): '%s'\n"
msgstr "无效的格式 (计数区域太宽): ‘%s’\n"

#: src/shar.c:2121
#, c-format
msgid "DEBUG was not selected at compile time"
msgstr "编译时选中了 DEBUG"

#: src/shar.c:2141
#, c-format
msgid "Hard limit %s\n"
msgstr "硬限制 %s\n"

#: src/shar.c:2183
#, c-format
msgid "This system doesn't support -Z ('compress'), use -z instead"
msgstr "此系统不支持 -Z (‘compress’)，用 -z 代替"

#: src/shar.c:2216
#, c-format
msgid "Soft limit %s\n"
msgstr "软限制 %s\n"

#: src/shar.c:2231
#, c-format
msgid "illegal output prefix\n"
msgstr "非法输出前缀\n"

#: src/shar.c:2278 src/unshar.c:413 src/uudecode.c:509 src/uuencode.c:252
#, c-format, no-wrap
msgid ""
"Copyright (C) %s Free Software Foundation, Inc.\n"
"This is free software; see the source for copying conditions.  There is NO\n"
"warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.\n"
msgstr ""
"Copyright (C) %s Free Software Foundation, Inc.\n"
"This is free software; see the source for copying conditions.  There is NO\n"
"warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.\n"

#: src/shar.c:2347
#, c-format
msgid "WARNING: No user interaction in vanilla mode"
msgstr "警告: 普通模式中没有用户交互"

#: src/shar.c:2359
#, c-format
msgid "WARNING: Non-text storage options overridden"
msgstr "警告: 非文本保存选项无效"

#: src/shar.c:2388
#, c-format
msgid "Cannot use -a option without -n"
msgstr "无法使用不带 -n 的 -a 选项"

#: src/shar.c:2394
#, c-format
msgid "Cannot use -l or -L option without -o"
msgstr "无法使用不带 -o 的 -l 或 -L 选项"

#: src/shar.c:2436
#, c-format
msgid "No input files"
msgstr "没有输入文件"

#: src/shar.c:2448
#, c-format
msgid "PLEASE avoid -X shars on Usenet or public networks"
msgstr "请避免在 Usenet 或公共网络上使用 -X shars"

#: src/shar.c:2514
#, c-format
msgid "Created %d files\n"
msgstr "创建了 %d 个文件\n"

#: src/unshar.c:167
#, c-format
msgid "Found no shell commands in %s"
msgstr "未在 %s 中找到 shell 命令"

#: src/unshar.c:183
#, c-format
msgid "%s looks like raw C code, not a shell archive"
msgstr "%s 看上去像是个原始的 C 代码，不是 shell 归档"

#: src/unshar.c:219
#, c-format
msgid "Found no shell commands after `cut' in %s"
msgstr "未在 %s 中的‘cut’后找到 shell 命令"

#: src/unshar.c:240
#, c-format
msgid "%s is probably not a shell archive"
msgstr "%s 可能不是个 shell 归档"

#: src/unshar.c:241
#, c-format
msgid "The `cut' line was followed by: %s"
msgstr "‘cut’行跟着: %s"

#: src/unshar.c:267
#, c-format
msgid "Starting `sh' process"
msgstr "开始运行‘sh’进程"

#: src/unshar.c:316
msgid ""
"Mandatory arguments to long options are mandatory for short options too.\n"
"\n"
"  -d, --directory=DIRECTORY   change to DIRECTORY before unpacking\n"
"  -c, --overwrite             pass -c to shar script for overwriting files\n"
"  -e, --exit-0                same as `--split-at=\"exit 0\"'\n"
"  -E, --split-at=STRING       split concatenated shars after STRING\n"
"  -f, --force                 same as `-c'\n"
"      --help                  display this help and exit\n"
"      --version               output version information and exit\n"
"\n"
"If no FILE, standard input is read.\n"
msgstr ""
"长选项所必需的参数对于短选项来说也是必须的。\n"
"\n"
"  -d, --directory=DIRECTORY   在解压前更改为 DIRECTORY 目录\n"
"  -c, --overwrite             将 -c 传递给 shar 脚本来覆盖文件\n"
"  -e, --exit-0                相当于‘--split-at=\"exit 0\"’\n"
"  -E, --split-at=STRING       分割在 STRING 后连结的 shar 文件\n"
"  -f, --force                 相当于‘-c’\n"
"      --help                  显示此帮助并退出\n"
"      --version               输出版本信息并退出\n"
"\n"
"如果未指定 FILE，就从标准输入读取。\n"

#: src/unshar.c:393
#, c-format
msgid "Cannot chdir to `%s'"
msgstr "无法更改目录至‘%s’"

#: src/unshar.c:444 src/unshar.c:506
#, c-format
msgid "allocate file name buffer"
msgstr "分配文件名缓冲区"

#: src/unshar.c:465
msgid "standard input"
msgstr "标准输入"

#: src/unshar.c:527
#, c-format
msgid "allocate file buffer"
msgstr "分配文件缓冲区"

#: src/uudecode.c:113 src/uudecode.c:444
#, c-format
msgid "%s: Write error"
msgstr "%s: 写错误"

#: src/uudecode.c:130 src/uudecode.c:217
#, c-format
msgid "%s: Short file"
msgstr "%s: 文件太小"

#: src/uudecode.c:166
#, c-format
msgid "%s: No `end' line"
msgstr "%s: 没有包含‘end’的行"

#: src/uudecode.c:226
#, c-format
msgid "%s: data following `=' padding character"
msgstr "%s: 数据后面跟有\"=\"填充字符"

#: src/uudecode.c:250 src/uudecode.c:258 src/uudecode.c:272
#, c-format
msgid "%s: illegal line"
msgstr "%s: 非法行"

#: src/uudecode.c:302
#, c-format
msgid "%s: Illegal file name: %s"
msgstr "%s: 非法文件名: %s"

#: src/uudecode.c:309
#, c-format
msgid "No user `%s'"
msgstr "不存在用户\"%s\""

#: src/uudecode.c:320
#, c-format
msgid "no memory for %d byte allocation"
msgstr "无内存供 %d 字节分配"

#: src/uudecode.c:345
#, c-format
msgid "cannot access %s"
msgstr "无法访问 %s"

#: src/uudecode.c:353
#, c-format
msgid "freopen of %s"
msgstr "freopen(%s) 错误"

#: src/uudecode.c:359
#, c-format
msgid "chmod of %s"
msgstr "chmod(%s) 错误"

#: src/uudecode.c:385
#, c-format
msgid "%s: No `begin' line"
msgstr "%s: 没有包含‘begin’的行"

#: src/uudecode.c:464
#, c-format
msgid "Usage: %s [FILE]...\n"
msgstr "用法: %s [文件]...\n"

#: src/uudecode.c:465
msgid ""
"Mandatory arguments to long options are mandatory to short options too.\n"
"  -o, --output-file=FILE   direct output to FILE\n"
"      --help               display this help and exit\n"
"      --version            output version information and exit\n"
msgstr ""
"长选项所必需的参数对于短选项来说也是必须的。\n"
"  -o, --output-file=FILE   输出至 FILE\n"
"      --help               显示此帮助并退出\n"
"      --version            显示版本信息并退出\n"

#: src/uudecode.c:533
#, c-format
msgid ""
"You cannot specify an output file when processing\n"
"multiple input files.\n"
msgstr ""
"您无法在操作多个输入文件时\n"
"指定一个输出文件。\n"

#: src/uuencode.c:133 src/uuencode.c:301 src/uuencode.c:308
#, c-format
msgid "Write error"
msgstr "写错误"

#: src/uuencode.c:155 src/uuencode.c:186 src/uuencode.c:188
#, c-format
msgid "Read error"
msgstr "读错误"

#: src/uuencode.c:206
#, c-format
msgid "Usage: %s [INFILE] REMOTEFILE\n"
msgstr "用法: %s [读入文件] 输出文件\n"

#: src/uuencode.c:207
msgid ""
"\n"
"  -m, --base64    use base64 encoding as of RFC1521\n"
"      --help      display this help and exit\n"
"      --version   output version information and exit\n"
msgstr ""
"\n"
"  -m, --base64    使用 RFC1521 标准定义的 base64 编码\n"
"      --help      显示此帮助并退出\n"
"      --version   输出版本信息并退出\n"

#: src/uuencode.c:277
#, c-format
msgid "fopen-ing %s"
msgstr "fopen %s 时出错"

#: src/uuencode.c:279
#, c-format
msgid "fstat-ing %s"
msgstr "fstat %s 时出错"

#. TRANSLATORS:  This is a phony function generated for the purpose of
#. constructing the strings to be extracted for translation.  Each string
#. is associated with a name (e.g. SM_ans_yes) that can be found in shar.c,
#. if you need to look up context.  These strings are all inserted into
#. the shar-generated shell script so the shar user can create shar archives
#. with messages localized for one locale.
#.
#: src/scripts.x:398
msgid "Note: not verifying md5sums.  Consider installing GNU coreutils."
msgstr "注意: 未验证 md5sums。请考虑安装 GNU coreutils 工具包。"

#: src/scripts.x:399
msgid ""
"WARNING: not restoring timestamps.  Consider getting and\n"
"installing GNU `touch', distributed in GNU coreutils..."
msgstr ""
"警告: 无法恢复时间戳。请考虑安装 GNU \"touch\"，\n"
"它是随 GNU coreutils 工具包一同分发的..."

#: src/scripts.x:401
#, c-format
msgid "lock directory %s exists"
msgstr "存在目录锁 %s"

#: src/scripts.x:402
#, c-format
msgid "failed to create %s lock directory"
msgstr "无法创建目录锁 %s"

#: src/scripts.x:403
#, c-format
msgid "x - created lock directory %s."
msgstr "x - 目录锁 %s 已创建。"

#: src/scripts.x:404
#, c-format
msgid "x - failed to create lock directory %s."
msgstr "x - 无法创建目录锁 %s。"

#: src/scripts.x:405
#, c-format
msgid "x - created directory %s."
msgstr "x - 创建目录 %s。"

#: src/scripts.x:406
#, c-format
msgid "x - failed to create directory %s."
msgstr "x - 无法创建目录 %s。"

#: src/scripts.x:407
msgid "yes"
msgstr "同意"

#: src/scripts.x:408
msgid "overwrite this file"
msgstr "覆盖此文件"

#: src/scripts.x:409
msgid "no"
msgstr "跳过"

#: src/scripts.x:410
msgid "skip this file"
msgstr "忽略此文件"

#: src/scripts.x:411
msgid "all"
msgstr "所有"

#: src/scripts.x:412
msgid "overwrite all files"
msgstr "覆盖所有文件"

#: src/scripts.x:413
msgid "none"
msgstr "无"

#: src/scripts.x:414
msgid "overwrite no files"
msgstr "不覆盖任何文件"

#: src/scripts.x:415
msgid "help"
msgstr "帮助"

#: src/scripts.x:416
msgid "explain choices"
msgstr "解释所选内容"

#: src/scripts.x:417
msgid "quit"
msgstr "退出"

#: src/scripts.x:418
msgid "exit immediately"
msgstr "立即退出"

#: src/scripts.x:419
msgid ""
"Archives must be unpacked in sequence!\n"
"Please unpack part `cat ${lock_dir}/seq` next."
msgstr ""
"归档必须按顺序解包！\n"
"下次请用 \"cat ${lock_dir}/seq\" 来进行部分解包。"

#: src/scripts.x:421
#, c-format
msgid "restore of %s failed"
msgstr "还原 %s 失败"

#: src/scripts.x:422
#, c-format
msgid "End of part %d, continue with part %d"
msgstr "在第 %d 块结束，从 %d 块继续"

#: src/scripts.x:423
#, c-format
msgid "End of %s part %d"
msgstr "归档 %s 的结束块是 %d"

#: src/scripts.x:424
#, c-format
msgid "restoration warning:  size of %s is not %s"
msgstr "还原警告: %s 的大小不是 %s"

#: src/scripts.x:425
msgid "(text)"
msgstr "(文本文件)"

#: src/scripts.x:426
msgid "(compressed)"
msgstr "(compress 压缩过的文件)"

#: src/scripts.x:427
msgid "(gzipped)"
msgstr "(gzip 压缩过的文件)"

#: src/scripts.x:428
msgid "(bzipped)"
msgstr "(bzip 压缩过的文件)"

#: src/scripts.x:429
msgid "(binary)"
msgstr "(二进制文件)"

#: src/scripts.x:430
msgid "archive"
msgstr "归档"

#: src/scripts.x:431
#, c-format
msgid "File %s is continued in part %d"
msgstr "文件 %s 在第 %d 块继续"

#: src/scripts.x:432
msgid "Please unpack part 1 first!"
msgstr "请先解包第 1 块"

#: src/scripts.x:433
msgid "Please unpack part ${shar_sequence} next!"
msgstr "下次请部分解包 ${shar_sequence}!"

#: src/scripts.x:434
#, c-format
msgid "x - STILL SKIPPING %s"
msgstr "x - 仍然跳过 %s"

#: src/scripts.x:435
#, c-format
msgid "continuing file %s"
msgstr "继续还原文件 %s"

#: src/scripts.x:436
msgid "(empty)"
msgstr "(空文件)"

#: src/scripts.x:437
#, c-format
msgid "x - overwriting %s"
msgstr "x- 正在覆盖 %s"

#: src/scripts.x:438
#, c-format
msgid "overwrite %s"
msgstr "覆盖 %s"

#: src/scripts.x:439
#, c-format
msgid "SKIPPING %s"
msgstr "跳过 %s"

#: src/scripts.x:440
msgid "extraction aborted"
msgstr "解包非正常退出"

#: src/scripts.x:441
#, c-format
msgid "x - SKIPPING %s (file already exists)"
msgstr "x - 跳过 %s (文件已经存在)"

#: src/scripts.x:442
#, c-format
msgid "x - extracting %s %s"
msgstr "x - 还原 %s %s"

#: src/scripts.x:443
#, c-format
msgid "File %s is complete"
msgstr "处理完文件 %s"

#: src/scripts.x:444
#, c-format
msgid "uudecoding file %s"
msgstr "正在用 uudecode 处理文件 %s"

#: src/scripts.x:445
#, c-format
msgid "uncompressing file %s"
msgstr "正在用 uncompress 处理文件 %s"

#: src/scripts.x:446
#, c-format
msgid "gunzipping file %s"
msgstr "正在用 gunzip 处理文件 %s"

#: src/scripts.x:447
#, c-format
msgid "bunzipping file %s"
msgstr "正在用 bunzip 处理文件 %s"

#: src/scripts.x:448
msgid "MD5 check failed"
msgstr "MD5 校验失败"

#: src/scripts.x:449
msgid "You have unpacked the last part"
msgstr "您已经解开了最后一部分"

#: src/scripts.x:450
#, c-format
msgid "x - removed lock directory %s."
msgstr "x - 目录锁 %s 已删除。"

#: src/scripts.x:451
#, c-format
msgid "x - failed to remove lock directory %s."
msgstr "x - 无法删除目录锁 %s。"

#~ msgid "restore of '%s' failed\n"
#~ msgstr "还原 \"%s\" 失败\n"

#~ msgid "End of part %ld, continue with part %ld"
#~ msgstr "在第 %ld 块结束，从第 %ld 块继续"

#~ msgid "Mandatory arguments to long options are mandatory for short options too.\n"
#~ msgstr "长选项所必需的参数对于短选项来说也是必需的。\n"

#~ msgid ""
#~ "\n"
#~ "Splitting output:\n"
#~ "  -o, --output-prefix=PREFIX    output to file PREFIX.01 through PREFIX.NN\n"
#~ "  -l, --whole-size-limit=SIZE   split archive, not files, to SIZE kilobytes\n"
#~ "  -L, --split-size-limit=SIZE   split archive, or files, to SIZE kilobytes\n"
#~ msgstr ""
#~ "\n"
#~ "分割输出:\n"
#~ "  -o, --output-prefix=PREFIX    输出为以 PREFIX.01... PREFIX.NN 命名的文件\n"
#~ "  -l, --whole-size-limit=SIZE   不以文件分割归档，而是以 SIZE 千字节分割 \n"
#~ "  -L, --split-size-limit=SIZE   以 SIZE 千字节分割归档，或者以文件分割\n"

#~ msgid "denied writing FIFO (%s)"
#~ msgstr "拒绝写入 FIFO (%s)"

#~ msgid "not following symlink (%s)"
#~ msgstr "未跟符号链接 (%s)"

#~ msgid "%s: illegal option -- %c\n"
#~ msgstr "%s: 非法选项 -- %c\n"

#~ msgid "memory exhausted"
#~ msgstr "内存耗尽"

#~ msgid "WARNING: not restoring timestamps.  Consider getting and"
#~ msgstr "警告: 未还原时间戳。请考虑获取并"

#~ msgid "%s: Illegal ~user"
#~ msgstr "%s: 非法 ~user"