# Traditional Chinese Messages for binutils
# Copyright (C) 2003, 05 Free Software Foundation, Inc.
# Wang Li <charles@linux.net.cn>, 2003
# Wei-Lun Chao <chaoweilun@pcmail.com.tw>, 2005
#
msgid ""
msgstr ""
"Project-Id-Version: binutils 2.15.96\n"
"Report-Msgid-Bugs-To: bug-binutils@gnu.org\n"
"POT-Creation-Date: 2010-03-03 14:57+0100\n"
"PO-Revision-Date: 2005-06-02 09:05+0800\n"
"Last-Translator: Wei-Lun Chao <chaoweilun@pcmail.com.tw>\n"
"Language-Team: Chinese (traditional) <zh-l10n@linux.org.tw>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=1; plural=0;\n"

#: addr2line.c:76
#, c-format
msgid "Usage: %s [option(s)] [addr(s)]\n"
msgstr "用法：%s [選項] [位址]\n"

#: addr2line.c:77
#, c-format
msgid " Convert addresses into line number/file name pairs.\n"
msgstr " 將位址轉換成檔案名/列號對。\n"

#: addr2line.c:78
#, c-format
msgid " If no addresses are specified on the command line, they will be read from stdin\n"
msgstr " 如果沒有在命令列中指定位址，就從標準輸入中讀取它們\n"

#: addr2line.c:79
#, fuzzy, c-format
msgid ""
" The options are:\n"
"  @<file>                Read options from <file>\n"
"  -b --target=<bfdname>  Set the binary file format\n"
"  -e --exe=<executable>  Set the input file name (default is a.out)\n"
"  -i --inlines           Unwind inlined functions\n"
"  -j --section=<name>    Read section-relative offsets instead of addresses\n"
"  -s --basenames         Strip directory names\n"
"  -f --functions         Show function names\n"
"  -C --demangle[=style]  Demangle function names\n"
"  -h --help              Display this information\n"
"  -v --version           Display the program's version\n"
"\n"
msgstr ""
" 選項為：\n"
"  -b --target=<bfdname>  設定二進制檔案格式\n"
"  -e --exe=<executable>  設定輸入檔案名 (預設為 a.out)\n"
"  -s --basenames         去除目錄名\n"
"  -f --functions         顯示函數名\n"
"  -C --demangle[=style]  解碼函數名\n"
"  -h --help              顯示本資訊\n"
"  -v --version           顯示程序的版本號\n"
"\n"

#: addr2line.c:94 ar.c:295 coffdump.c:469 dlltool.c:3838 dllwrap.c:510
#: nlmconv.c:1113 objcopy.c:563 objcopy.c:598 readelf.c:2935 size.c:99
#: srconv.c:1741 strings.c:676 sysdump.c:653 windmc.c:233 windres.c:698
#, c-format
msgid "Report bugs to %s\n"
msgstr "將 bug 報告到 %s\n"

#: addr2line.c:292
#, fuzzy, c-format
msgid "%s: cannot get addresses from archive"
msgstr "%s：無法從保存檔中得到位址"

#: addr2line.c:309
#, fuzzy, c-format
msgid "%s: cannot find section %s"
msgstr "%s：無法設置時間：%s"

#: addr2line.c:375 nm.c:1554 objdump.c:3234
#, c-format
msgid "unknown demangling style `%s'"
msgstr "未知的解碼(demangle)風格「%s」"

#: ar.c:218
#, c-format
msgid "no entry %s in archive\n"
msgstr "保存檔中沒有條目 %s\n"

#: ar.c:236
#, fuzzy, c-format
msgid "Usage: %s [emulation options] [--plugin <name>] [-]{dmpqrstx}[abcfilNoPsSuvV] [member-name] [count] archive-file file...\n"
msgstr "用法：%s [模擬選項] [-]{dmpqrstx}[abcfilNoPsSuvV] [成員名] [計數] 保存檔 文件...\n"

#: ar.c:238
#, c-format
msgid "Usage: %s [emulation options] [-]{dmpqrstx}[abcfilNoPsSuvV] [member-name] [count] archive-file file...\n"
msgstr "用法：%s [模擬選項] [-]{dmpqrstx}[abcfilNoPsSuvV] [成員名] [計數] 保存檔 文件...\n"

#: ar.c:243
#, c-format
msgid "       %s -M [<mri-script]\n"
msgstr "       %s -M [<mri-命令稿]\n"

#: ar.c:244
#, c-format
msgid " commands:\n"
msgstr " 命令：\n"

#: ar.c:245
#, c-format
msgid "  d            - delete file(s) from the archive\n"
msgstr "  d            - 從保存檔中刪除檔案\n"

#: ar.c:246
#, c-format
msgid "  m[ab]        - move file(s) in the archive\n"
msgstr "  m[ab]        - 在保存檔中移動檔案\n"

#: ar.c:247
#, c-format
msgid "  p            - print file(s) found in the archive\n"
msgstr "  p            - 列印在保存檔中找到的檔案\n"

#: ar.c:248
#, c-format
msgid "  q[f]         - quick append file(s) to the archive\n"
msgstr "  q[f]         - 將檔案快速追加到保存檔中\n"

#: ar.c:249
#, c-format
msgid "  r[ab][f][u]  - replace existing or insert new file(s) into the archive\n"
msgstr "  r[ab][f][u]  - 替換保存檔中已有的檔案或加入新檔案\n"

#: ar.c:250
#, c-format
msgid "  t            - display contents of archive\n"
msgstr "  t            - 顯示保存檔的內容\n"

#: ar.c:251
#, c-format
msgid "  x[o]         - extract file(s) from the archive\n"
msgstr "  x[o]         - 從保存檔中分解檔案\n"

#: ar.c:252
#, c-format
msgid " command specific modifiers:\n"
msgstr " 特定命令修飾符：\n"

#: ar.c:253
#, c-format
msgid "  [a]          - put file(s) after [member-name]\n"
msgstr "  [a]          - 將檔案置於 [成員名] 之後\n"

#: ar.c:254
#, c-format
msgid "  [b]          - put file(s) before [member-name] (same as [i])\n"
msgstr "  [b]          - 將檔案置於 [成員名] 之前 (於 [i] 相同)\n"

#: ar.c:255
#, fuzzy, c-format
msgid "  [D]          - use zero for timestamps and uids/gids\n"
msgstr "  [P]          - 在匹配時使用完整的路徑名\n"

#: ar.c:256
#, c-format
msgid "  [N]          - use instance [count] of name\n"
msgstr "  [N]          - 使用名稱的實例 [數量]\n"

#: ar.c:257
#, c-format
msgid "  [f]          - truncate inserted file names\n"
msgstr "  [f]          - 截去插入的檔案名稱\n"

#: ar.c:258
#, c-format
msgid "  [P]          - use full path names when matching\n"
msgstr "  [P]          - 在匹配時使用完整的路徑名\n"

#: ar.c:259
#, c-format
msgid "  [o]          - preserve original dates\n"
msgstr "  [o]          - 保留原來的日期\n"

#: ar.c:260
#, c-format
msgid "  [u]          - only replace files that are newer than current archive contents\n"
msgstr "  [u]          - 只替換比目前保存檔內容更新的檔案\n"

#: ar.c:261
#, c-format
msgid " generic modifiers:\n"
msgstr " 通用修飾符：\n"

#: ar.c:262
#, c-format
msgid "  [c]          - do not warn if the library had to be created\n"
msgstr "  [c]          - 不在必須建立函式庫的時候提出警告\n"

#: ar.c:263
#, c-format
msgid "  [s]          - create an archive index (cf. ranlib)\n"
msgstr "  [s]          - 建立保存檔索引 (cf. ranlib)\n"

#: ar.c:264
#, c-format
msgid "  [S]          - do not build a symbol table\n"
msgstr "  [S]          - 不要建立符號表\n"

#: ar.c:265
#, fuzzy, c-format
msgid "  [T]          - make a thin archive\n"
msgstr "  m[ab]        - 在保存檔中移動檔案\n"

#: ar.c:266
#, c-format
msgid "  [v]          - be verbose\n"
msgstr "  [v]          - 輸出較多資訊\n"

#: ar.c:267
#, c-format
msgid "  [V]          - display the version number\n"
msgstr "  [V]          - 顯示版本號\n"

#: ar.c:268
#, fuzzy, c-format
msgid "  @<file>      - read options from <file>\n"
msgstr "   --def <deffile>        輸入 .def 檔案的名稱\n"

#: ar.c:270
#, fuzzy, c-format
msgid " optional:\n"
msgstr " 選項為：\n"

#: ar.c:271
#, c-format
msgid "  --plugin <p> - load the specified plugin\n"
msgstr ""

#: ar.c:278
#, c-format
msgid "Usage: %s [options] archive\n"
msgstr "用法：%s [選項] 保存檔\n"

#: ar.c:279
#, c-format
msgid " Generate an index to speed access to archives\n"
msgstr " 產生索引以加快對保存檔的存取\n"

#: ar.c:280
#, c-format
msgid ""
" The options are:\n"
"  @<file>                      Read options from <file>\n"
msgstr ""

#: ar.c:283
#, fuzzy, c-format
msgid "  --plugin <name>              Load the specified plugin\n"
msgstr "   -L --linker <名稱>        以 <名稱> 做為連接程式。\n"

#: ar.c:286
#, fuzzy, c-format
msgid ""
"  -t                           Update the archive's symbol map timestamp\n"
"  -h --help                    Print this help message\n"
"  -v --version                 Print version information\n"
msgstr ""
" 選項為：\n"
"  -r                           忽略與 rc 的相容性\n"
"  -h --help                    列印本求助訊息\n"
"  -V --version                 列印版本資訊\n"

#: ar.c:512 nm.c:1626
#, c-format
msgid "sorry - this program has been built without plugin support\n"
msgstr ""

#: ar.c:539
msgid "two different operation options specified"
msgstr "指定了兩個不同的操作選項"

#: ar.c:620
#, c-format
msgid "illegal option -- %c"
msgstr "不正確選項 -- %c"

#: ar.c:663
msgid "no operation specified"
msgstr "沒有指定操作"

#: ar.c:666
msgid "`u' is only meaningful with the `r' option."
msgstr "「u」只在使用「r」選項的時候才有意義。"

#: ar.c:669
#, fuzzy
msgid "`u' is not meaningful with the `D' option."
msgstr "「u」只在使用「r」選項的時候才有意義。"

#: ar.c:677
msgid "`N' is only meaningful with the `x' and `d' options."
msgstr "「N」只在使用「x」和「d」選項的時候才有意義。"

#: ar.c:680
msgid "Value for `N' must be positive."
msgstr "「N」的值必須是正數。"

#: ar.c:692
msgid "`x' cannot be used on thin archives."
msgstr ""

#: ar.c:733
#, c-format
msgid "internal error -- this option not implemented"
msgstr "內部錯誤 -- 該選項尚未實現"

#: ar.c:802
#, c-format
msgid "creating %s"
msgstr "正在建立 %s"

#: ar.c:851 ar.c:906 ar.c:1234 objcopy.c:2027
#, c-format
msgid "internal stat error on %s"
msgstr "在 %s 內部狀態錯誤"

#: ar.c:855
#, c-format
msgid ""
"\n"
"<%s>\n"
"\n"
msgstr ""
"\n"
"<%s>\n"
"\n"

#: ar.c:871 ar.c:939
#, c-format
msgid "%s is not a valid archive"
msgstr "%s 不是有效的保存檔"

#: ar.c:1139
#, c-format
msgid "No member named `%s'\n"
msgstr "沒有名為「%s」的成員\n"

#: ar.c:1189
#, c-format
msgid "no entry %s in archive %s!"
msgstr "保存檔 %2$s 中沒有條目 %1$s！"

#: ar.c:1328
#, c-format
msgid "%s: no archive map to update"
msgstr "%s：沒有要更新的保存檔映射"

#: arsup.c:89
#, c-format
msgid "No entry %s in archive.\n"
msgstr "保存檔中沒有條目 %s。\n"

#: arsup.c:114
#, c-format
msgid "Can't open file %s\n"
msgstr "無法打開檔案 %s\n"

#: arsup.c:164
#, c-format
msgid "%s: Can't open output archive %s\n"
msgstr "%s：無法打開輸出保存檔 %s\n"

#: arsup.c:181
#, c-format
msgid "%s: Can't open input archive %s\n"
msgstr "%s：無法打開輸入保存檔 %s\n"

#: arsup.c:190
#, c-format
msgid "%s: file %s is not an archive\n"
msgstr "%s：檔案 %s 不是保存檔\n"

#: arsup.c:230
#, c-format
msgid "%s: no output archive specified yet\n"
msgstr "%s：尚未指定輸出保存檔\n"

#: arsup.c:250 arsup.c:288 arsup.c:330 arsup.c:350 arsup.c:416
#, c-format
msgid "%s: no open output archive\n"
msgstr "%s：未打開輸出保存檔\n"

#: arsup.c:261 arsup.c:371 arsup.c:397
#, c-format
msgid "%s: can't open file %s\n"
msgstr "%s：無法打開檔案 %s\n"

#: arsup.c:315 arsup.c:393 arsup.c:474
#, c-format
msgid "%s: can't find module file %s\n"
msgstr "%s：無法找到模組檔案 %s\n"

#: arsup.c:425
#, c-format
msgid "Current open archive is %s\n"
msgstr "目前打開的保存檔是 %s\n"

#: arsup.c:449
#, c-format
msgid "%s: no open archive\n"
msgstr "%s：未打開保存檔\n"

#: bin2c.c:59
#, fuzzy, c-format
msgid "Usage: %s < input_file > output_file\n"
msgstr "用法：%s [選項] [輸入檔案] [輸出檔案]\n"

#: bin2c.c:60
#, c-format
msgid "Prints bytes from stdin in hex format.\n"
msgstr ""

#: binemul.c:38
#, c-format
msgid "  No emulation specific options\n"
msgstr "  沒有模擬特有的選項\n"

#. Macros for common output.
#: binemul.h:43
#, c-format
msgid " emulation options: \n"
msgstr " 模擬選項：\n"

#: bucomm.c:157
#, c-format
msgid "can't set BFD default target to `%s': %s"
msgstr "無法將 BFD 預設標的設置為「%s」：%s"

#: bucomm.c:168
#, c-format
msgid "%s: Matching formats:"
msgstr "%s：匹配格式："

#: bucomm.c:183
#, c-format
msgid "Supported targets:"
msgstr "支援的目標："

#: bucomm.c:185
#, c-format
msgid "%s: supported targets:"
msgstr "%s：支援的目標："

#: bucomm.c:202
#, c-format
msgid "Supported architectures:"
msgstr "支援的系統架構："

#: bucomm.c:204
#, c-format
msgid "%s: supported architectures:"
msgstr "%s：支援的系統架構："

#: bucomm.c:399
#, c-format
msgid "BFD header file version %s\n"
msgstr "BFD 標頭檔案版本 %s\n"

#: bucomm.c:548
#, c-format
msgid "%s: bad number: %s"
msgstr "%s：錯誤的編號：%s"

#: bucomm.c:565 strings.c:422
#, c-format
msgid "'%s': No such file"
msgstr "%s：無此檔案"

#: bucomm.c:567 strings.c:424
#, c-format
msgid "Warning: could not locate '%s'.  reason: %s"
msgstr "警告：無法找到 %s 的位置。原因：%s"

#: bucomm.c:571
#, c-format
msgid "Warning: '%s' is not an ordinary file"
msgstr "警告：'%s' 不是一般檔案"

#: coffdump.c:106
#, c-format
msgid "#lines %d "
msgstr "#列號 %d "

#: coffdump.c:460 sysdump.c:646
#, c-format
msgid "Usage: %s [option(s)] in-file\n"
msgstr "用法：%s [選項] 輸入檔案\n"

#: coffdump.c:461
#, c-format
msgid " Print a human readable interpretation of a SYSROFF object file\n"
msgstr " 列印適於閱讀的對 SYSROFF 目標檔案的解釋\n"

#: coffdump.c:462
#, fuzzy, c-format
msgid ""
" The options are:\n"
"  @<file>                Read options from <file>\n"
"  -h --help              Display this information\n"
"  -v --version           Display the program's version\n"
"\n"
msgstr ""
" 選項為：\n"
"  -h --help              顯示本求助資訊\n"
"  -v --version           顯示程序的版本號\n"
"\n"

#: coffdump.c:531 srconv.c:1831 sysdump.c:710
msgid "no input file specified"
msgstr "未指定輸入檔案"

#: cxxfilt.c:119 nm.c:264 objdump.c:251
#, c-format
msgid "Report bugs to %s.\n"
msgstr "將程式錯誤報告到 %s。\n"

#: debug.c:647
msgid "debug_add_to_current_namespace: no current file"
msgstr "debug_add_to_current_namespace：沒有目前檔案"

#: debug.c:726
msgid "debug_start_source: no debug_set_filename call"
msgstr "debug_start_source：沒有 debug_set_filename 呼叫"

#: debug.c:782
msgid "debug_record_function: no debug_set_filename call"
msgstr "debug_record_function：沒有 debug_set_filename 呼叫"

#: debug.c:834
msgid "debug_record_parameter: no current function"
msgstr "debug_record_parameter：沒有目前函數"

#: debug.c:866
msgid "debug_end_function: no current function"
msgstr "debug_end_function：沒有目前函數"

#: debug.c:872
msgid "debug_end_function: some blocks were not closed"
msgstr "debug_end_function：某些區塊沒有關閉"

#: debug.c:900
msgid "debug_start_block: no current block"
msgstr "debug_start_block：沒有目前區塊"

#: debug.c:936
msgid "debug_end_block: no current block"
msgstr "debug_end_block：沒有目前區塊"

#: debug.c:943
msgid "debug_end_block: attempt to close top level block"
msgstr "debug_end_block：試圖關閉頂層區塊"

#: debug.c:966
msgid "debug_record_line: no current unit"
msgstr "debug_record_line：沒有目前單元"

#. FIXME
#: debug.c:1019
msgid "debug_start_common_block: not implemented"
msgstr "debug_start_common_block：未實作"

#. FIXME
#: debug.c:1030
msgid "debug_end_common_block: not implemented"
msgstr "debug_end_common_block：未實作"

#. FIXME.
#: debug.c:1114
msgid "debug_record_label: not implemented"
msgstr "debug_record_label：未實作"

#: debug.c:1136
msgid "debug_record_variable: no current file"
msgstr "debug_record_variable：沒有目前檔案"

#: debug.c:1664
msgid "debug_make_undefined_type: unsupported kind"
msgstr "debug_make_undefined_type：不支援的種類"

#: debug.c:1841
msgid "debug_name_type: no current file"
msgstr "debug_name_type：沒有目前檔案"

#: debug.c:1886
msgid "debug_tag_type: no current file"
msgstr "debug_tag_type：沒有目前檔案"

#: debug.c:1894
msgid "debug_tag_type: extra tag attempted"
msgstr "debug_tag_type：已嘗試更多的標記"

#: debug.c:1931
#, c-format
msgid "Warning: changing type size from %d to %d\n"
msgstr "警告：類型大小由 %d 改為 %d\n"

#: debug.c:1953
msgid "debug_find_named_type: no current compilation unit"
msgstr "debug_find_named_type：沒有目前編譯單元"

#: debug.c:2056
#, c-format
msgid "debug_get_real_type: circular debug information for %s\n"
msgstr "debug_get_real_type：關於 %s 的循環除錯資訊\n"

#: debug.c:2483
msgid "debug_write_type: illegal type encountered"
msgstr "debug_write_type：遇到不正確類型"

#: dlltool.c:884 dlltool.c:910 dlltool.c:941
#, c-format
msgid "Internal error: Unknown machine type: %d"
msgstr "內部錯誤：未知的機器類型：%d"

#: dlltool.c:982
#, c-format
msgid "Can't open def file: %s"
msgstr "無法打開 def 檔案：%s"

#: dlltool.c:987
#, c-format
msgid "Processing def file: %s"
msgstr "處理 def 檔案：%s"

#: dlltool.c:991
msgid "Processed def file"
msgstr "已處理的 def 檔案"

#: dlltool.c:1015
#, c-format
msgid "Syntax error in def file %s:%d"
msgstr "def 檔案中語法錯誤 %s：%d"

#: dlltool.c:1050
#, c-format
msgid "%s: Path components stripped from image name, '%s'."
msgstr "%s：從映像檔 '%s' 中截去路徑成分。"

#: dlltool.c:1068
#, c-format
msgid "NAME: %s base: %x"
msgstr "名稱：%s 基於：%x"

#: dlltool.c:1071 dlltool.c:1087
msgid "Can't have LIBRARY and NAME"
msgstr "不具有 LIBRARY 與 NAME"

#: dlltool.c:1084
#, c-format
msgid "LIBRARY: %s base: %x"
msgstr "LIBRARY：%s 基於：%x"

#: dlltool.c:1320 resrc.c:293
#, c-format
msgid "wait: %s"
msgstr "等待：%s"

#: dlltool.c:1325 dllwrap.c:410 resrc.c:298
#, c-format
msgid "subprocess got fatal signal %d"
msgstr "子行程收到致命信號 %d"

#: dlltool.c:1331 dllwrap.c:417 resrc.c:305
#, c-format
msgid "%s exited with status %d"
msgstr "%s 以狀態 %d 離開"

#: dlltool.c:1362
#, c-format
msgid "Sucking in info from %s section in %s"
msgstr "從 %2$s 中的 %1$s 區段獲取資訊"

#: dlltool.c:1487
#, c-format
msgid "Excluding symbol: %s"
msgstr "排除符號：%s"

#: dlltool.c:1576 dlltool.c:1587 nm.c:1001 nm.c:1012
#, c-format
msgid "%s: no symbols"
msgstr "%s：沒有符號"

#. FIXME: we ought to read in and block out the base relocations.
#: dlltool.c:1613
#, c-format
msgid "Done reading %s"
msgstr "讀入 %s 完成"

#: dlltool.c:1623
#, c-format
msgid "Unable to open object file: %s"
msgstr "無法打開目標檔案：%s"

#: dlltool.c:1626
#, c-format
msgid "Scanning object file %s"
msgstr "正在掃瞄目標檔案 %s"

#: dlltool.c:1641
#, c-format
msgid "Cannot produce mcore-elf dll from archive file: %s"
msgstr "無法從保存檔中產生 mcore-elf 動態連接庫：%s"

#: dlltool.c:1741
msgid "Adding exports to output file"
msgstr "正在加入導出至輸出檔案"

#: dlltool.c:1789
msgid "Added exports to output file"
msgstr "已加入導出至輸出檔案"

#: dlltool.c:1930
#, c-format
msgid "Generating export file: %s"
msgstr "正在產生導出檔案：%s"

#: dlltool.c:1935
#, c-format
msgid "Unable to open temporary assembler file: %s"
msgstr "無法打開臨時組譯檔案：%s"

#: dlltool.c:1938
#, c-format
msgid "Opened temporary file: %s"
msgstr "已打開的臨時檔案：%s"

#: dlltool.c:2113
#, fuzzy
msgid "failed to read the number of entries from base file"
msgstr "讀入存儲桶數量失敗\n"

#: dlltool.c:2161
msgid "Generated exports file"
msgstr "已產生的導出檔案"

#: dlltool.c:2370
#, c-format
msgid "bfd_open failed open stub file: %s"
msgstr "無法打開輸出檔案 %s"

#: dlltool.c:2373
#, c-format
msgid "Creating stub file: %s"
msgstr "正在建立佔位檔案：%s"

#: dlltool.c:2837 dlltool.c:2906
#, c-format
msgid "failed to open temporary head file: %s"
msgstr "打開臨時標頭檔案失敗：%s"

#: dlltool.c:2979
#, c-format
msgid "failed to open temporary tail file: %s"
msgstr "打開臨時標尾檔案失敗：%s"

#: dlltool.c:3052
#, c-format
msgid "Can't open .lib file: %s"
msgstr "無法打開 .lib 檔案：%s"

#: dlltool.c:3055
#, c-format
msgid "Creating library file: %s"
msgstr "正在建立函式庫檔案：%s"

#: dlltool.c:3146 dlltool.c:3152
#, c-format
msgid "cannot delete %s: %s"
msgstr "無法刪除 %s：%s"

#: dlltool.c:3157
msgid "Created lib file"
msgstr "已建立的 lib 檔案"

#: dlltool.c:3375 dlltool.c:3397
#, fuzzy, c-format
msgid "%s is not a library"
msgstr "%s 不是有效的保存檔"

#: dlltool.c:3415
#, c-format
msgid "Import library `%s' specifies two or more dlls"
msgstr ""

#: dlltool.c:3426
#, fuzzy, c-format
msgid "Unable to determine dll name for `%s' (not an import library?)"
msgstr "無法確定要讀入的符號數量\n"

#: dlltool.c:3647
#, c-format
msgid "Warning, ignoring duplicate EXPORT %s %d,%d"
msgstr "警告，正在忽略重覆的 EXPORT %s %d,%d"

#: dlltool.c:3653
#, fuzzy, c-format
msgid "Error, duplicate EXPORT with ordinals: %s"
msgstr "錯誤，重覆的 EXPORT 以及原始出處: %s"

#: dlltool.c:3758
msgid "Processing definitions"
msgstr "正在處理定義"

#: dlltool.c:3790
msgid "Processed definitions"
msgstr "已處理定義"

#. xgetext:c-format
#: dlltool.c:3797 dllwrap.c:471
#, c-format
msgid "Usage %s <option(s)> <object-file(s)>\n"
msgstr "用法: %s <選項> <目標檔案>\n"

#. xgetext:c-format
#: dlltool.c:3799
#, c-format
msgid "   -m --machine <machine>    Create as DLL for <machine>.  [default: %s]\n"
msgstr "   -m --machine <架構>    為 <架構> 建立 DLL。[預設：%s]\n"

#: dlltool.c:3800
#, c-format
msgid "        possible <machine>: arm[_interwork], i386, mcore[-elf]{-le|-be}, ppc, thumb\n"
msgstr "        可能的 <架構>：arm[_interwork]、i386、mcore[-elf]{-le|-be}、ppc、thumb\n"

#: dlltool.c:3801
#, c-format
msgid "   -e --output-exp <outname> Generate an export file.\n"
msgstr "   -e --output-exp <導出檔>  產生導出檔案。\n"

#: dlltool.c:3802
#, c-format
msgid "   -l --output-lib <outname> Generate an interface library.\n"
msgstr "   -l --output-lib <導出檔>  產生介面函式庫。\n"

#: dlltool.c:3803
#, fuzzy, c-format
msgid "   -y --output-delaylib <outname> Create a delay-import library.\n"
msgstr "   --output-lib <導出名>  產生輸入函式庫。\n"

#: dlltool.c:3804
#, c-format
msgid "   -a --add-indirect         Add dll indirects to export file.\n"
msgstr "   -a --add-indirect         間接添加 dll 至導出檔案。\n"

#: dlltool.c:3805
#, c-format
msgid "   -D --dllname <name>       Name of input dll to put into interface lib.\n"
msgstr "   -D --dllname <名稱>       要置入介面函式庫的輸入 dll 名稱。\n"

#: dlltool.c:3806
#, c-format
msgid "   -d --input-def <deffile>  Name of .def file to be read in.\n"
msgstr "   -d --input-def <定義檔>   將要讀入的 .def 檔案名。\n"

#: dlltool.c:3807
#, c-format
msgid "   -z --output-def <deffile> Name of .def file to be created.\n"
msgstr "   -z --output-def <定義檔>  將要建立的 .def 檔案名。\n"

#: dlltool.c:3808
#, c-format
msgid "      --export-all-symbols   Export all symbols to .def\n"
msgstr "      --export-all-symbols   將所有符號導出到 .def\n"

#: dlltool.c:3809
#, c-format
msgid "      --no-export-all-symbols  Only export listed symbols\n"
msgstr "      --no-export-all-symbols  只導出列舉的符號\n"

#: dlltool.c:3810
#, c-format
msgid "      --exclude-symbols <list> Don't export <list>\n"
msgstr "      --exclude-symbols <列表> 不要導出 <列表>\n"

#: dlltool.c:3811
#, c-format
msgid "      --no-default-excludes  Clear default exclude symbols\n"
msgstr "      --no-default-excludes  清空預設排除的符號\n"

#: dlltool.c:3812
#, c-format
msgid "   -b --base-file <basefile> Read linker generated base file.\n"
msgstr "   -b --base-file <基本檔>   讀取連接程式所產生的 base 檔案。\n"

#: dlltool.c:3813
#, c-format
msgid "   -x --no-idata4            Don't generate idata$4 section.\n"
msgstr "   -x --no-idata4            不產生 idata$4 區段。\n"

#: dlltool.c:3814
#, c-format
msgid "   -c --no-idata5            Don't generate idata$5 section.\n"
msgstr "   -c --no-idata5            不產生 idata$5 區段。\n"

#: dlltool.c:3815
#, c-format
msgid "      --use-nul-prefixed-import-tables Use zero prefixed idata$4 and idata$5.\n"
msgstr ""

#: dlltool.c:3816
#, fuzzy, c-format
msgid "   -U --add-underscore       Add underscores to all symbols in interface library.\n"
msgstr "   -U --add-underscore       於介面中的符號添加底線。\n"

#: dlltool.c:3817
#, fuzzy, c-format
msgid "      --add-stdcall-underscore Add underscores to stdcall symbols in interface library.\n"
msgstr "   -U --add-underscore       於介面中的符號添加底線。\n"

#: dlltool.c:3818
#, c-format
msgid "   -k --kill-at              Kill @<n> from exported names.\n"
msgstr "   -k --kill-at              刪去導出名稱中的 @<n>。\n"

#: dlltool.c:3819
#, c-format
msgid "   -A --add-stdcall-alias    Add aliases without @<n>.\n"
msgstr "   -A --add-stdcall-alias    添加不帶 @<n> 的別名。\n"

#: dlltool.c:3820
#, c-format
msgid "   -p --ext-prefix-alias <prefix> Add aliases with <prefix>.\n"
msgstr "   -p --ext-prefix-alias <前置>   添加附帶 <前置> 的別名。\n"

#: dlltool.c:3821
#, c-format
msgid "   -S --as <name>            Use <name> for assembler.\n"
msgstr "   -S --as <名稱>            用 <名稱> 做為組譯程式。\n"

#: dlltool.c:3822
#, c-format
msgid "   -f --as-flags <flags>     Pass <flags> to the assembler.\n"
msgstr "   -f --as-flags <旗標>      把 <旗標> 傳遞給組譯程式。\n"

#: dlltool.c:3823
#, c-format
msgid "   -C --compat-implib        Create backward compatible import library.\n"
msgstr "   -C --compat-implib        建立向後相容的導入函式庫。\n"

#: dlltool.c:3824
#, c-format
msgid "   -n --no-delete            Keep temp files (repeat for extra preservation).\n"
msgstr "   -n --no-delete            保留臨時檔案 (重覆以達到額外的保留)。\n"

#: dlltool.c:3825
#, c-format
msgid "   -t --temp-prefix <prefix> Use <prefix> to construct temp file names.\n"
msgstr "   -t --temp-prefix <前置>   使用 <前置> 來建構臨時檔案名稱。\n"

#: dlltool.c:3826
#, c-format
msgid "   -I --identify <implib>    Report the name of the DLL associated with <implib>.\n"
msgstr ""

#: dlltool.c:3827
#, c-format
msgid "      --identify-strict      Causes --identify to report error when multiple DLLs.\n"
msgstr ""

#: dlltool.c:3828
#, c-format
msgid "   -v --verbose              Be verbose.\n"
msgstr "   -v --verbose              輸出更多資訊。\n"

#: dlltool.c:3829
#, c-format
msgid "   -V --version              Display the program version.\n"
msgstr "   -V --version              顯示程式版本號碼。\n"

#: dlltool.c:3830
#, c-format
msgid "   -h --help                 Display this information.\n"
msgstr "   -h --help                 顯示本資訊。\n"

#: dlltool.c:3831
#, fuzzy, c-format
msgid "   @<file>                   Read options from <file>.\n"
msgstr "   -h --help                 顯示本資訊。\n"

#: dlltool.c:3833
#, c-format
msgid "   -M --mcore-elf <outname>  Process mcore-elf object files into <outname>.\n"
msgstr "   -M --mcore-elf <輸出名稱> 處理 mcore-elf 物件檔案進入 <輸出名稱>。\n"

#: dlltool.c:3834
#, c-format
msgid "   -L --linker <name>        Use <name> as the linker.\n"
msgstr "   -L --linker <名稱>        以 <名稱> 做為連接程式。\n"

#: dlltool.c:3835
#, c-format
msgid "   -F --linker-flags <flags> Pass <flags> to the linker.\n"
msgstr "   -F --linker-flags <旗標>  把 <旗標> 傳遞給連接程式。\n"

#: dlltool.c:3972
#, c-format
msgid "Path components stripped from dllname, '%s'."
msgstr "已從 dll 名稱 '%s' 中截去路徑部分。"

#: dlltool.c:4020
#, c-format
msgid "Unable to open base-file: %s"
msgstr "無法開啟基本檔案：%s"

#: dlltool.c:4055
#, c-format
msgid "Machine '%s' not supported"
msgstr "不支援架構「%s」"

#: dlltool.c:4124
#, c-format
msgid "Warning, machine type (%d) not supported for delayimport."
msgstr ""

#: dlltool.c:4192 dllwrap.c:201
#, c-format
msgid "Tried file: %s"
msgstr "已試檔案：%s"

#: dlltool.c:4199 dllwrap.c:208
#, c-format
msgid "Using file: %s"
msgstr "正在處理檔案：%s"

#: dllwrap.c:291
#, c-format
msgid "Keeping temporary base file %s"
msgstr "保留臨時 base 檔案 %s"

#: dllwrap.c:293
#, c-format
msgid "Deleting temporary base file %s"
msgstr "刪除臨時 base 檔案 %s"

#: dllwrap.c:307
#, c-format
msgid "Keeping temporary exp file %s"
msgstr "保留臨時 exp 檔案 %s"

#: dllwrap.c:309
#, c-format
msgid "Deleting temporary exp file %s"
msgstr "刪除臨時 exp 檔案 %s"

#: dllwrap.c:322
#, c-format
msgid "Keeping temporary def file %s"
msgstr "保留臨時 def 檔案 %s"

#: dllwrap.c:324
#, c-format
msgid "Deleting temporary def file %s"
msgstr "刪除臨時 def 檔案 %s"

#: dllwrap.c:472
#, c-format
msgid "  Generic options:\n"
msgstr "  通用選項：\n"

#: dllwrap.c:473
#, c-format
msgid "   @<file>                Read options from <file>\n"
msgstr ""

#: dllwrap.c:474
#, c-format
msgid "   --quiet, -q            Work quietly\n"
msgstr "   --quiet, -q            安靜地工作\n"

#: dllwrap.c:475
#, c-format
msgid "   --verbose, -v          Verbose\n"
msgstr "   --verbose, -v          輸出較多資訊\n"

#: dllwrap.c:476
#, c-format
msgid "   --version              Print dllwrap version\n"
msgstr "   --version              列印 dllwrap 的版本號\n"

#: dllwrap.c:477
#, c-format
msgid "   --implib <outname>     Synonym for --output-lib\n"
msgstr "   --implib <outname>     --output-lib 的同義語\n"

#: dllwrap.c:478
#, c-format
msgid "  Options for %s:\n"
msgstr "  %s 的選項：\n"

#: dllwrap.c:479
#, c-format
msgid "   --driver-name <driver> Defaults to \"gcc\"\n"
msgstr "   --driver-name <驅動器> 預設為「gcc」\n"

#: dllwrap.c:480
#, c-format
msgid "   --driver-flags <flags> Override default ld flags\n"
msgstr "   --driver-flags <旗標>  覆蓋預設的 ld 旗標\n"

#: dllwrap.c:481
#, c-format
msgid "   --dlltool-name <dlltool> Defaults to \"dlltool\"\n"
msgstr "   --dlltool-name <dlltool> 預設為「dlltool」\n"

#: dllwrap.c:482
#, c-format
msgid "   --entry <entry>        Specify alternate DLL entry point\n"
msgstr "   --entry <入口>         指定額外的 DLL 進入點\n"

#: dllwrap.c:483
#, c-format
msgid "   --image-base <base>    Specify image base address\n"
msgstr "   --image-base <基址>    指定映像的基本位址\n"

#: dllwrap.c:484
#, c-format
msgid "   --target <machine>     i386-cygwin32 or i386-mingw32\n"
msgstr "   --target <架構>        i386-cygwin32 或 i386-mingw32\n"

#: dllwrap.c:485
#, c-format
msgid "   --dry-run              Show what needs to be run\n"
msgstr "   --dry-run              只顯示需要執行那些動作\n"

#: dllwrap.c:486
#, c-format
msgid "   --mno-cygwin           Create Mingw DLL\n"
msgstr "   --mno-cygwin           建立 Mingw DLL\n"

#: dllwrap.c:487
#, c-format
msgid "  Options passed to DLLTOOL:\n"
msgstr "  傳遞給 DLLTOOL 的選項：\n"

#: dllwrap.c:488
#, c-format
msgid "   --machine <machine>\n"
msgstr "   --machine <架構>\n"

#: dllwrap.c:489
#, c-format
msgid "   --output-exp <outname> Generate export file.\n"
msgstr "   --output-exp <導出名>  產生導出檔案。\n"

#: dllwrap.c:490
#, c-format
msgid "   --output-lib <outname> Generate input library.\n"
msgstr "   --output-lib <導出名>  產生輸入函式庫。\n"

#: dllwrap.c:491
#, c-format
msgid "   --add-indirect         Add dll indirects to export file.\n"
msgstr "   --add-indirect         間接添加 dll 至導出檔案。\n"

#: dllwrap.c:492
#, c-format
msgid "   --dllname <name>       Name of input dll to put into output lib.\n"
msgstr "   --dllname <名稱>       要置入輸出函式庫的輸入 dll 名稱。\n"

#: dllwrap.c:493
#, c-format
msgid "   --def <deffile>        Name input .def file\n"
msgstr "   --def <deffile>        輸入 .def 檔案的名稱\n"

#: dllwrap.c:494
#, c-format
msgid "   --output-def <deffile> Name output .def file\n"
msgstr "   --output-def <deffile> 輸出 .def 檔案的名稱\n"

#: dllwrap.c:495
#, c-format
msgid "   --export-all-symbols     Export all symbols to .def\n"
msgstr "   --export-all-symbols     將所有符號導出到 .def 中\n"

#: dllwrap.c:496
#, c-format
msgid "   --no-export-all-symbols  Only export .drectve symbols\n"
msgstr "   --no-export-all-symbols  只導出符號 .drectve\n"

#: dllwrap.c:497
#, c-format
msgid "   --exclude-symbols <list> Exclude <list> from .def\n"
msgstr "   --exclude-symbols <列表> 從 .def 中排除 <列表>\n"

#: dllwrap.c:498
#, c-format
msgid "   --no-default-excludes    Zap default exclude symbols\n"
msgstr "   --no-default-excludes    清空預設排除的符號\n"

#: dllwrap.c:499
#, c-format
msgid "   --base-file <basefile> Read linker generated base file\n"
msgstr "   --base-file <basefile> Read linker generated base file\n"

#: dllwrap.c:500
#, c-format
msgid "   --no-idata4           Don't generate idata$4 section\n"
msgstr "   --no-idata4           不產生 idata$4 區段\n"

#: dllwrap.c:501
#, c-format
msgid "   --no-idata5           Don't generate idata$5 section\n"
msgstr "   --no-idata5           不產生 idata$5 區段\n"

#: dllwrap.c:502
#, c-format
msgid "   -U                     Add underscores to .lib\n"
msgstr "   -U                     為 .lib 添加底線\n"

#: dllwrap.c:503
#, c-format
msgid "   -k                     Kill @<n> from exported names\n"
msgstr "   -k                     刪去導出名字中的 @<n>\n"

#: dllwrap.c:504
#, c-format
msgid "   --add-stdcall-alias    Add aliases without @<n>\n"
msgstr "   --add-stdcall-alias    添加不帶 @<n> 的別名\n"

#: dllwrap.c:505
#, c-format
msgid "   --as <name>            Use <name> for assembler\n"
msgstr "   --as <名稱>            以 <名稱> 做為組譯程式\n"

#: dllwrap.c:506
#, c-format
msgid "   --nodelete             Keep temp files.\n"
msgstr "   --nodelete             保留臨時檔案。\n"

#: dllwrap.c:507
#, c-format
msgid "  Rest are passed unmodified to the language driver\n"
msgstr "  其餘的都不加任何修改地傳遞給語言驅動器\n"

#: dllwrap.c:781
msgid "Must provide at least one of -o or --dllname options"
msgstr "必須提供至少一個 -o 或 --dllname 選項"

#: dllwrap.c:810
msgid ""
"no export definition file provided.\n"
"Creating one, but that may not be what you want"
msgstr ""
"未提供導出定義檔案。\n"
"現在建立一個，但可能不是您所要的"

#: dllwrap.c:969
#, c-format
msgid "DLLTOOL name    : %s\n"
msgstr "DLLTOOL 名稱    ：%s\n"

#: dllwrap.c:970
#, c-format
msgid "DLLTOOL options : %s\n"
msgstr "DLLTOOL 選項    ：%s\n"

#: dllwrap.c:971
#, c-format
msgid "DRIVER name     : %s\n"
msgstr "驅動器名稱      ：%s\n"

#: dllwrap.c:972
#, c-format
msgid "DRIVER options  : %s\n"
msgstr "驅動器選項      ：%s\n"

#: dwarf.c:106 dwarf.c:155 readelf.c:357 readelf.c:525
#, c-format
msgid "Unhandled data length: %d\n"
msgstr "未處理的資料長度：%d\n"

#: dwarf.c:304 dwarf.c:2649
msgid "badly formed extended line op encountered!\n"
msgstr "遇到不正常的擴充型列操作碼！\n"

#: dwarf.c:311
#, c-format
msgid "  Extended opcode %d: "
msgstr "  擴充操作碼 %d： "

#: dwarf.c:316
#, c-format
msgid ""
"End of Sequence\n"
"\n"
msgstr ""
"序列結尾\n"
"\n"

#: dwarf.c:322
#, c-format
msgid "set Address to 0x%lx\n"
msgstr "設定位址至 0x%lx\n"

#: dwarf.c:327
#, c-format
msgid "  define new File Table entry\n"
msgstr "  定義新檔案表條目\n"

#: dwarf.c:328 dwarf.c:2263
#, c-format
msgid "  Entry\tDir\tTime\tSize\tName\n"
msgstr "  條目\t目錄\t時間\t大小\t名稱\n"

#: dwarf.c:330
#, c-format
msgid "   %d\t"
msgstr "   %d\t"

#: dwarf.c:333 dwarf.c:335 dwarf.c:337 dwarf.c:2275 dwarf.c:2277 dwarf.c:2279
#, c-format
msgid "%lu\t"
msgstr "%lu\t"

#: dwarf.c:338
#, c-format
msgid ""
"%s\n"
"\n"
msgstr ""
"%s\n"
"\n"

#: dwarf.c:342
#, c-format
msgid "set Discriminator to %lu\n"
msgstr ""

#. The test against DW_LNW_hi_user is redundant due to
#. the limited range of the unsigned char data type used
#. for op_code.
#. && op_code <= DW_LNE_hi_user
#: dwarf.c:384
#, fuzzy, c-format
msgid "user defined: length %d\n"
msgstr "(使用者定義的定位操作碼)"

#: dwarf.c:386 dwarf.c:2680
#, c-format
msgid "UNKNOWN: length %d\n"
msgstr "未知：長度 %d\n"

#: dwarf.c:399
msgid "<no .debug_str section>"
msgstr "<沒有 .debug_str 區段>"

#: dwarf.c:405
#, c-format
msgid "DW_FORM_strp offset too big: %lx\n"
msgstr ""

#: dwarf.c:406
msgid "<offset is too big>"
msgstr "<偏移量過大>"

#: dwarf.c:639
#, c-format
msgid "Unknown TAG value: %lx"
msgstr "未知的 TAG 值：%lx"

#: dwarf.c:675
#, c-format
msgid "Unknown FORM value: %lx"
msgstr "未知的 FORM 值：%lx"

#: dwarf.c:684
#, c-format
msgid " %lu byte block: "
msgstr " %lu 位元組的區塊："

#: dwarf.c:1102
#, c-format
msgid "(User defined location op)"
msgstr "(使用者定義的定位操作碼)"

#: dwarf.c:1104
#, c-format
msgid "(Unknown location op)"
msgstr "(未知的定位操作碼)"

#: dwarf.c:1152
msgid "Internal error: DWARF version is not 2 or 3.\n"
msgstr "內部錯誤：DWARF 版本號碼並非 2 或 3。\n"

#: dwarf.c:1251
msgid "DW_FORM_data8 is unsupported when sizeof (unsigned long) != 8\n"
msgstr "當 sizeof (unsigned long) != 8 時，不支援 DW_FORM_data8\n"

#: dwarf.c:1300
#, c-format
msgid " (indirect string, offset: 0x%lx): %s"
msgstr " (間接字串，偏移量：0x%lx)： %s"

#: dwarf.c:1309
#, fuzzy, c-format
msgid "Unrecognized form: %lu\n"
msgstr "無法識別的形式：%d\n"

#: dwarf.c:1393
#, c-format
msgid "(not inlined)"
msgstr "(非內嵌的)"

#: dwarf.c:1396
#, c-format
msgid "(inlined)"
msgstr "(內嵌的)"

#: dwarf.c:1399
#, c-format
msgid "(declared as inline but ignored)"
msgstr "(聲明為內嵌但被忽略)"

#: dwarf.c:1402
#, c-format
msgid "(declared as inline and inlined)"
msgstr "(聲明為內嵌並已內嵌)"

#: dwarf.c:1405
#, c-format
msgid "  (Unknown inline attribute value: %lx)"
msgstr "  (未知的內嵌屬性值：%lx)"

#: dwarf.c:1566
#, c-format
msgid "(location list)"
msgstr "(位置列表)"

#: dwarf.c:1585 dwarf.c:3281
#, c-format
msgid " [without DW_AT_frame_base]"
msgstr " [不具 DW_AT_frame_base]"

#: dwarf.c:1597
#, c-format
msgid "Offset %lx used as value for DW_AT_import attribute of DIE at offset %lx is too big.\n"
msgstr ""

#: dwarf.c:1771
#, c-format
msgid "Unknown AT value: %lx"
msgstr "未知的 AT 值：%lx"

#: dwarf.c:1838
#, c-format
msgid "Reserved length value (%lx) found in section %s\n"
msgstr ""

#: dwarf.c:1849
#, fuzzy, c-format
msgid "Corrupt unit length (%lx) found in section %s\n"
msgstr "%s 區段的內容：\n"

#: dwarf.c:1856
#, fuzzy, c-format
msgid "No comp units in %s section ?"
msgstr "  在 .debug_info 區段中沒有編譯單元？"

#: dwarf.c:1865
#, c-format
msgid "Not enough memory for a debug info array of %u entries"
msgstr "記憶體不足以容納 %u 個條目的除錯資訊陣列"

#: dwarf.c:1873 dwarf.c:2882 dwarf.c:2976 dwarf.c:3050 dwarf.c:3167
#: dwarf.c:3316 dwarf.c:3374 dwarf.c:3571
#, c-format
msgid ""
"Contents of the %s section:\n"
"\n"
msgstr ""
"%s 區段的內容：\n"
"\n"

#: dwarf.c:1881
#, fuzzy, c-format
msgid "Unable to locate %s section!\n"
msgstr "無法找到 .debug_abbrev 區段的位置！\n"

#: dwarf.c:1944
#, fuzzy, c-format
msgid "  Compilation Unit @ offset 0x%lx:\n"
msgstr "  編譯單元 @ %lx：\n"

#: dwarf.c:1945
#, fuzzy, c-format
msgid "   Length:        0x%lx (%s)\n"
msgstr "   長度：        %ld\n"

#: dwarf.c:1947
#, c-format
msgid "   Version:       %d\n"
msgstr "   版本：        %d\n"

#: dwarf.c:1948
#, c-format
msgid "   Abbrev Offset: %ld\n"
msgstr "   縮寫偏移量：  %ld\n"

#: dwarf.c:1949
#, c-format
msgid "   Pointer Size:  %d\n"
msgstr "   指標大小：    %d\n"

#: dwarf.c:1955
#, c-format
msgid "Debug info is corrupted, length of CU at %lx extends beyond end of section (length = %lx)\n"
msgstr ""

#: dwarf.c:1964
#, fuzzy, c-format
msgid "CU at offset %lx contains corrupt or unsupported version number: %d.\n"
msgstr " 位於偏移量 0x%lx 含有 %lu 個條目：\n"

#: dwarf.c:1974
#, c-format
msgid "Debug info is corrupted, abbrev offset (%lx) is larger than abbrev section size (%lx)\n"
msgstr ""

#: dwarf.c:2021
#, c-format
msgid "Bogus end-of-siblings marker detected at offset %lx in .debug_info section\n"
msgstr ""

#: dwarf.c:2025
msgid "Further warnings about bogus end-of-sibling markers suppressed\n"
msgstr ""

#: dwarf.c:2032
#, fuzzy, c-format
msgid " <%d><%lx>: Abbrev Number: %lu"
msgstr " <%d><%lx>：縮寫編號：%lu (%s)\n"

#: dwarf.c:2049
#, c-format
msgid "DIE at offset %lx refers to abbreviation number %lu which does not exist\n"
msgstr ""

#: dwarf.c:2055
#, fuzzy, c-format
msgid " (%s)\n"
msgstr "  %s\n"

#: dwarf.c:2146
#, fuzzy, c-format
msgid ""
"Raw dump of debug contents of section %s:\n"
"\n"
msgstr ""
"\n"
"傾印 %s 區段的除錯內容：\n"
"\n"

#: dwarf.c:2184
#, fuzzy, c-format
msgid "The information in section %s appears to be corrupt - the section is too small\n"
msgstr "列資訊似乎已損壞 - 區段過小\n"

#: dwarf.c:2194 dwarf.c:2482
msgid "Only DWARF version 2 and 3 line info is currently supported.\n"
msgstr "目前只支援第二與第三版的 DWARF 列資訊。\n"

#: dwarf.c:2215
#, fuzzy, c-format
msgid "  Offset:                      0x%lx\n"
msgstr "  長度：                      %ld\n"

#: dwarf.c:2216
#, c-format
msgid "  Length:                      %ld\n"
msgstr "  長度：                      %ld\n"

#: dwarf.c:2217
#, c-format
msgid "  DWARF Version:               %d\n"
msgstr "  DWARF 版本：                %d\n"

#: dwarf.c:2218
#, c-format
msgid "  Prologue Length:             %d\n"
msgstr "  前言長度：        %d\n"

#: dwarf.c:2219
#, c-format
msgid "  Minimum Instruction Length:  %d\n"
msgstr "  最小指令長度：              %d\n"

#: dwarf.c:2220
#, c-format
msgid "  Initial value of 'is_stmt':  %d\n"
msgstr " 「is_stmt」的初始值：       %d\n"

#: dwarf.c:2221
#, c-format
msgid "  Line Base:                   %d\n"
msgstr "  列基數：                      %d\n"

#: dwarf.c:2222
#, c-format
msgid "  Line Range:                  %d\n"
msgstr "  列範圍：                      %d\n"

#: dwarf.c:2223
#, c-format
msgid "  Opcode Base:                 %d\n"
msgstr "  操作碼基數：                %d\n"

#: dwarf.c:2232
#, c-format
msgid ""
"\n"
" Opcodes:\n"
msgstr ""
"\n"
" 操作碼:\n"

#: dwarf.c:2235
#, c-format
msgid "  Opcode %d has %d args\n"
msgstr "  操作碼 %d 具有 %d 個引數\n"

#: dwarf.c:2241
#, c-format
msgid ""
"\n"
" The Directory Table is empty.\n"
msgstr ""
"\n"
" 目錄表為空。\n"

#: dwarf.c:2244
#, c-format
msgid ""
"\n"
" The Directory Table:\n"
msgstr ""
"\n"
" 目錄表：\n"

#: dwarf.c:2248
#, c-format
msgid "  %s\n"
msgstr "  %s\n"

#: dwarf.c:2259
#, c-format
msgid ""
"\n"
" The File Name Table is empty.\n"
msgstr ""
"\n"
" 檔案名表為空。\n"

#: dwarf.c:2262
#, c-format
msgid ""
"\n"
" The File Name Table:\n"
msgstr ""
"\n"
" 檔案名稱表：\n"

#: dwarf.c:2270
#, c-format
msgid "  %d\t"
msgstr "  %d\t"

#: dwarf.c:2281
#, c-format
msgid "%s\n"
msgstr "%s\n"

#. Now display the statements.
#: dwarf.c:2289
#, c-format
msgid ""
"\n"
" Line Number Statements:\n"
msgstr ""
"\n"
" 列號敍述句：\n"

#: dwarf.c:2305
#, fuzzy, c-format
msgid "  Special opcode %d: advance Address by %lu to 0x%lx"
msgstr "  特殊操作碼 %d: 增加位址由 %d 到 0x%lx"

#: dwarf.c:2309
#, c-format
msgid " and Line by %d to %d\n"
msgstr "以及列號由 %d 到 %d\n"

#: dwarf.c:2319
#, c-format
msgid "  Copy\n"
msgstr "  複製\n"

#: dwarf.c:2327
#, fuzzy, c-format
msgid "  Advance PC by %lu to 0x%lx\n"
msgstr "  增加 PC 由 %d 到 %lx\n"

#: dwarf.c:2335
#, c-format
msgid "  Advance Line by %d to %d\n"
msgstr "  增加列號由 %d 到 %d\n"

#: dwarf.c:2342
#, c-format
msgid "  Set File Name to entry %d in the File Name Table\n"
msgstr "  設定檔案名稱為檔名表中的第 %d 條\n"

#: dwarf.c:2350
#, fuzzy, c-format
msgid "  Set column to %lu\n"
msgstr "  將行設定為 %d\n"

#: dwarf.c:2357
#, c-format
msgid "  Set is_stmt to %d\n"
msgstr "  將 is_stmt 設定為 %d\n"

#: dwarf.c:2362
#, c-format
msgid "  Set basic block\n"
msgstr "  設定基本區塊\n"

#: dwarf.c:2370
#, fuzzy, c-format
msgid "  Advance PC by constant %lu to 0x%lx\n"
msgstr "  增加 PC 常數 %d 到 0x%lx\n"

#: dwarf.c:2378
#, fuzzy, c-format
msgid "  Advance PC by fixed size amount %lu to 0x%lx\n"
msgstr "  增加 PC 固定大小的量 %d 到 0x%lx\n"

#: dwarf.c:2383
#, c-format
msgid "  Set prologue_end to true\n"
msgstr "  將 prologue_end 設定為真\n"

#: dwarf.c:2387
#, c-format
msgid "  Set epilogue_begin to true\n"
msgstr "  將 epilogue_begin 設定為真\n"

#: dwarf.c:2393 dwarf.c:2758
#, fuzzy, c-format
msgid "  Set ISA to %lu\n"
msgstr "  將 ISA 設定為 %d\n"

#: dwarf.c:2397 dwarf.c:2762
#, c-format
msgid "  Unknown opcode %d with operands: "
msgstr "  未知操作碼 %d 應用於運算子："

#: dwarf.c:2430
#, fuzzy, c-format
msgid ""
"Decoded dump of debug contents of section %s:\n"
"\n"
msgstr ""
"\n"
"傾印 %s 區段的除錯內容：\n"
"\n"

#: dwarf.c:2472
msgid "The line info appears to be corrupt - the section is too small\n"
msgstr "列資訊似乎已損壞 - 區段過小\n"

#: dwarf.c:2592
#, fuzzy, c-format
msgid "CU: %s:\n"
msgstr "  %s\n"

#: dwarf.c:2593 dwarf.c:2606
#, fuzzy, c-format
msgid "File name                            Line number    Starting address\n"
msgstr "編號: 名稱                           相約束      旗標\n"

#: dwarf.c:2599
#, c-format
msgid "CU: %s/%s:\n"
msgstr ""

#: dwarf.c:2604 dwarf.c:2676
#, fuzzy, c-format
msgid "%s:\n"
msgstr "%s\n"

#. If directory index is 0, that means current directory.
#: dwarf.c:2709
#, c-format
msgid ""
"\n"
"./%s:[++]\n"
msgstr ""

#. The directory index starts counting at 1.
#: dwarf.c:2715
#, c-format
msgid ""
"\n"
"%s/%s:\n"
msgstr ""

#: dwarf.c:2800
#, c-format
msgid "%-35s  %11d  %#18lx\n"
msgstr ""

#: dwarf.c:2805
#, c-format
msgid "%s  %11d  %#18lx\n"
msgstr ""

#: dwarf.c:2835 dwarf.c:3112 dwarf.c:3534
#, c-format
msgid "Unable to load/parse the .debug_info section, so cannot interpret the %s section.\n"
msgstr ""

#: dwarf.c:2916 dwarf.c:3419
#, c-format
msgid ".debug_info offset of 0x%lx in %s section does not point to a CU header.\n"
msgstr ""

#: dwarf.c:2930
msgid "Only DWARF 2 and 3 pubnames are currently supported\n"
msgstr "目前只支援第二與第三版 DWARF 的 pubname\n"

#: dwarf.c:2937
#, c-format
msgid "  Length:                              %ld\n"
msgstr "  長度：                              %ld\n"

#: dwarf.c:2939
#, c-format
msgid "  Version:                             %d\n"
msgstr "  版本：                              %d\n"

#: dwarf.c:2941
#, fuzzy, c-format
msgid "  Offset into .debug_info section:     0x%lx\n"
msgstr "  在 .debug_info 區段中的偏移量：       %ld\n"

#: dwarf.c:2943
#, c-format
msgid "  Size of area in .debug_info section: %ld\n"
msgstr "  在 .debug_info 區段中區域的大小：     %ld\n"

#: dwarf.c:2946
#, c-format
msgid ""
"\n"
"    Offset\tName\n"
msgstr ""
"\n"
"    偏移量\t名稱\n"

#: dwarf.c:2997
#, c-format
msgid " DW_MACINFO_start_file - lineno: %d filenum: %d\n"
msgstr " DW_MACINFO_start_file - 列號：%d 檔案編號：%d\n"

#: dwarf.c:3003
#, c-format
msgid " DW_MACINFO_end_file\n"
msgstr " DW_MACINFO_end_file\n"

#: dwarf.c:3011
#, c-format
msgid " DW_MACINFO_define - lineno : %d macro : %s\n"
msgstr " DW_MACINFO_define - 列號：%d 巨集：%s\n"

#: dwarf.c:3020
#, c-format
msgid " DW_MACINFO_undef - lineno : %d macro : %s\n"
msgstr " DW_MACINFO_undef - 列號：%d 巨集：%s\n"

#: dwarf.c:3032
#, c-format
msgid " DW_MACINFO_vendor_ext - constant : %d string : %s\n"
msgstr " DW_MACINFO_vendor_ext - 常數：%d 字串：%s\n"

#: dwarf.c:3061
#, c-format
msgid "  Number TAG\n"
msgstr "  數字標記\n"

#: dwarf.c:3067
#, c-format
msgid "   %ld      %s    [%s]\n"
msgstr "   %ld      %s    [%s]\n"

#: dwarf.c:3070
msgid "has children"
msgstr "含有子格位"

#: dwarf.c:3070
msgid "no children"
msgstr "沒有子格位"

#: dwarf.c:3073
#, c-format
msgid "    %-18s %s\n"
msgstr "    %-18s %s\n"

#: dwarf.c:3106 dwarf.c:3312 dwarf.c:3528
#, fuzzy, c-format
msgid ""
"\n"
"The %s section is empty.\n"
msgstr ""
"\n"
".debug_str 區段為空。\n"

#. FIXME: Should we handle this case?
#: dwarf.c:3156
msgid "Location lists in .debug_info section aren't in ascending order!\n"
msgstr ".debug_info 區段中的定位列表未依由小到大順序！\n"

#: dwarf.c:3159
msgid "No location lists in .debug_info section!\n"
msgstr ".debug_info 區段中沒有定位列表！\n"

#: dwarf.c:3164
#, fuzzy, c-format
msgid "Location lists in %s section start at 0x%lx\n"
msgstr ".debug_info 區段中的定位列表起始自 0x%lx\n"

#: dwarf.c:3168
#, c-format
msgid "    Offset   Begin    End      Expression\n"
msgstr "    偏移量   起始   結束      表示式\n"

#: dwarf.c:3199
#, c-format
msgid "There is a hole [0x%lx - 0x%lx] in .debug_loc section.\n"
msgstr "在 .debug_loc 區段中有一個漏洞 [0x%lx - 0x%lx]。\n"

#: dwarf.c:3203
#, c-format
msgid "There is an overlap [0x%lx - 0x%lx] in .debug_loc section.\n"
msgstr "在 .debug_loc 區段中有一個重疊 [0x%lx - 0x%lx]。\n"

#: dwarf.c:3211
#, fuzzy, c-format
msgid "Offset 0x%lx is bigger than .debug_loc section size.\n"
msgstr "在 .debug_loc 區段中有一個漏洞 [0x%lx - 0x%lx]。\n"

#: dwarf.c:3220 dwarf.c:3255 dwarf.c:3265
#, fuzzy, c-format
msgid "Location list starting at offset 0x%lx is not terminated.\n"
msgstr ""
"\n"
"「%s」位於偏移量 0x%lx 的重定位區段含有 %ld 個位元組：\n"

#: dwarf.c:3239 dwarf.c:3622
#, fuzzy, c-format
msgid "<End of list>\n"
msgstr "    %8.8lx <表列尾端>\n"

#: dwarf.c:3249
#, fuzzy, c-format
msgid "(base address)\n"
msgstr "設定起始位址"

#: dwarf.c:3284
msgid " (start == end)"
msgstr " (開始 == 結束)"

#: dwarf.c:3286
msgid " (start > end)"
msgstr " (開始 > 結束)"

#: dwarf.c:3296
#, c-format
msgid "There are %ld unused bytes at the end of section %s\n"
msgstr ""

#: dwarf.c:3430
msgid "Only DWARF 2 and 3 aranges are currently supported.\n"
msgstr "目前只支援第二與第三版 DWARF 的 arange。\n"

#: dwarf.c:3434
#, c-format
msgid "  Length:                   %ld\n"
msgstr "  長度：                      %ld\n"

#: dwarf.c:3435
#, c-format
msgid "  Version:                  %d\n"
msgstr "  版本：                %d\n"

#: dwarf.c:3436
#, fuzzy, c-format
msgid "  Offset into .debug_info:  0x%lx\n"
msgstr "  在 .debug_info 區段中的偏移量：       %lx\n"

#: dwarf.c:3437
#, c-format
msgid "  Pointer Size:             %d\n"
msgstr "  指標大小:             %d\n"

#: dwarf.c:3438
#, c-format
msgid "  Segment Size:             %d\n"
msgstr "  節區大小:             %d\n"

#: dwarf.c:3447
msgid "Pointer size + Segment size is not a power of two.\n"
msgstr ""

#: dwarf.c:3452
#, fuzzy, c-format
msgid ""
"\n"
"    Address            Length\n"
msgstr ""
"\n"
"    地址長度\n"

#: dwarf.c:3454
#, fuzzy, c-format
msgid ""
"\n"
"    Address    Length\n"
msgstr ""
"\n"
"    地址長度\n"

#: dwarf.c:3544
msgid "No range lists in .debug_info section!\n"
msgstr ".debug_info 區段中沒有範圍列表！\n"

#: dwarf.c:3568
#, fuzzy, c-format
msgid "Range lists in %s section start at 0x%lx\n"
msgstr ".debug_ranges 區段中的範圍列表起始自 0x%lx\n"

#: dwarf.c:3572
#, c-format
msgid "    Offset   Begin    End\n"
msgstr "    偏移量   起始   結束\n"

#: dwarf.c:3593
#, fuzzy, c-format
msgid "There is a hole [0x%lx - 0x%lx] in %s section.\n"
msgstr "在 .debug_loc 區段中有一個漏洞 [0x%lx - 0x%lx]。\n"

#: dwarf.c:3597
#, fuzzy, c-format
msgid "There is an overlap [0x%lx - 0x%lx] in %s section.\n"
msgstr "在 .debug_loc 區段中有一個重疊 [0x%lx - 0x%lx]。\n"

#: dwarf.c:3640
#, fuzzy
msgid "(start == end)"
msgstr " (開始 == 結束)"

#: dwarf.c:3642
#, fuzzy
msgid "(start > end)"
msgstr " (開始 > 結束)"

#: dwarf.c:3879
msgid "bad register: "
msgstr ""

#: dwarf.c:3881
#, fuzzy, c-format
msgid "Contents of the %s section:\n"
msgstr ""
"%s 區段的內容：\n"
"\n"

#: dwarf.c:4646
#, c-format
msgid "  DW_CFA_??? (User defined call frame op: %#x)\n"
msgstr ""

#: dwarf.c:4648
#, c-format
msgid "unsupported or unknown Dwarf Call Frame Instruction number: %#x\n"
msgstr ""

#: dwarf.c:4672
#, c-format
msgid "Displaying the debug contents of section %s is not yet supported.\n"
msgstr "尚不支援顯示 %s 區段的除錯內容。\n"

#: dwarf.c:4714
#, c-format
msgid "%s: Error: "
msgstr "%s：錯誤："

#: dwarf.c:4725
#, c-format
msgid "%s: Warning: "
msgstr "%s：警告："

#: dwarf.c:4823 dwarf.c:4889
#, c-format
msgid "Unrecognized debug option '%s'\n"
msgstr "無法識別的除錯選項「%s」\n"

#: emul_aix.c:43
#, c-format
msgid "  [-g]         - 32 bit small archive\n"
msgstr "  [-g]         - 32 位元小型保存檔\n"

#: emul_aix.c:44
#, c-format
msgid "  [-X32]       - ignores 64 bit objects\n"
msgstr "  [-X32]       - 忽略 64 位元物件\n"

#: emul_aix.c:45
#, c-format
msgid "  [-X64]       - ignores 32 bit objects\n"
msgstr "  [-X64]       - 忽略 32 位元物件\n"

#: emul_aix.c:46
#, c-format
msgid "  [-X32_64]    - accepts 32 and 64 bit objects\n"
msgstr "  [-X32_64]    - 接受 32 位元和 64 位元物件\n"

#: ieee.c:311
msgid "unexpected end of debugging information"
msgstr "除錯資訊意外結束"

#: ieee.c:398
msgid "invalid number"
msgstr "無效的編號"

#: ieee.c:451
msgid "invalid string length"
msgstr "無效的字串長度"

#: ieee.c:506 ieee.c:547
msgid "expression stack overflow"
msgstr "表示式堆疊向上溢出"

#: ieee.c:526
msgid "unsupported IEEE expression operator"
msgstr "不支援的 IEEE 表示式運算子"

#: ieee.c:541
msgid "unknown section"
msgstr "未知的區段"

#: ieee.c:562
msgid "expression stack underflow"
msgstr "表示式堆疊向下溢出"

#: ieee.c:576
msgid "expression stack mismatch"
msgstr "表示式堆疊不匹配"

#: ieee.c:613
msgid "unknown builtin type"
msgstr "未知的內建類型"

#: ieee.c:758
msgid "BCD float type not supported"
msgstr "不支援的 BCD 浮點類型"

#: ieee.c:895
msgid "unexpected number"
msgstr "意外的編號"

#: ieee.c:902
msgid "unexpected record type"
msgstr "意外的紀錄類型"

#: ieee.c:935
msgid "blocks left on stack at end"
msgstr "結束時仍留在堆疊中的區塊"

#: ieee.c:1208
msgid "unknown BB type"
msgstr "未知的 BB 類型"

#: ieee.c:1217
msgid "stack overflow"
msgstr "堆疊向上溢出"

#: ieee.c:1240
msgid "stack underflow"
msgstr "堆疊向下溢出"

#: ieee.c:1352 ieee.c:1422 ieee.c:2120
msgid "illegal variable index"
msgstr "不正確的變數索引"

#: ieee.c:1400
msgid "illegal type index"
msgstr "不正確的類型索引"

#: ieee.c:1410 ieee.c:1447
msgid "unknown TY code"
msgstr "未知的 TY 代碼"

#: ieee.c:1429
msgid "undefined variable in TY"
msgstr "TY 中未定義的變量"

#. Pascal file name.  FIXME.
#: ieee.c:1841
msgid "Pascal file name not supported"
msgstr "不支援 Pascal 檔案名"

#: ieee.c:1889
msgid "unsupported qualifier"
msgstr "不支援的限定符號"

#: ieee.c:2158
msgid "undefined variable in ATN"
msgstr "ATN 中未定義的變數"

#: ieee.c:2201
msgid "unknown ATN type"
msgstr "未知的 ATN 類型"

#. Reserved for FORTRAN common.
#: ieee.c:2323
msgid "unsupported ATN11"
msgstr "不支援 ATN11"

#. We have no way to record this information.  FIXME.
#: ieee.c:2350
msgid "unsupported ATN12"
msgstr "不支援 ATN12"

#: ieee.c:2410
msgid "unexpected string in C++ misc"
msgstr "意外的 C++ 雜項字串"

#: ieee.c:2423
msgid "bad misc record"
msgstr "不良的雜項記錄"

#: ieee.c:2464
msgid "unrecognized C++ misc record"
msgstr "無法識別的 C++ 雜項紀錄"

#: ieee.c:2579
msgid "undefined C++ object"
msgstr "未定義的 C++ 物件"

#: ieee.c:2613
msgid "unrecognized C++ object spec"
msgstr "無法識別的 C++ 物件規格"

#: ieee.c:2649
msgid "unsupported C++ object type"
msgstr "不支援的 C++ 物件類型"

#: ieee.c:2659
msgid "C++ base class not defined"
msgstr "未定義 C++ 基本類別"

#: ieee.c:2671 ieee.c:2776
msgid "C++ object has no fields"
msgstr "C++ 物件沒有欄位"

#: ieee.c:2690
msgid "C++ base class not found in container"
msgstr "容器中找不到 C++ 基本類別"

#: ieee.c:2797
msgid "C++ data member not found in container"
msgstr "容器中找不到 C++ 資料成員"

#: ieee.c:2838 ieee.c:2988
msgid "unknown C++ visibility"
msgstr "未知的 C++ 可見度"

#: ieee.c:2872
msgid "bad C++ field bit pos or size"
msgstr "不良的 C++ 欄位位元位置或大小"

#: ieee.c:2964
msgid "bad type for C++ method function"
msgstr "不良的 C++ 方法函式類型"

#: ieee.c:2974
msgid "no type information for C++ method function"
msgstr "對於 C++ 方法函式沒有類型資訊"

#: ieee.c:3013
msgid "C++ static virtual method"
msgstr "C++ 靜態虛擬方法"

#: ieee.c:3108
msgid "unrecognized C++ object overhead spec"
msgstr "無法識別的 C++ 物件頂層規格"

#: ieee.c:3147
msgid "undefined C++ vtable"
msgstr "未定義的 C++ vtable"

#: ieee.c:3216
msgid "C++ default values not in a function"
msgstr "C++ 預設值不在函式之中"

#: ieee.c:3256
msgid "unrecognized C++ default type"
msgstr "無法識別的 C++ 預設類型"

#: ieee.c:3287
msgid "reference parameter is not a pointer"
msgstr "參考參數不是指標"

#: ieee.c:3370
msgid "unrecognized C++ reference type"
msgstr "無法識別的 C++ 參考類型"

#: ieee.c:3452
msgid "C++ reference not found"
msgstr "找不到 C++ 參考"

#: ieee.c:3460
msgid "C++ reference is not pointer"
msgstr "C++ 參考不是指標"

#: ieee.c:3486 ieee.c:3494
msgid "missing required ASN"
msgstr "遺失必須的 ASN"

#: ieee.c:3521 ieee.c:3529
msgid "missing required ATN65"
msgstr "遺失必須的 ATN65"

#: ieee.c:3543
msgid "bad ATN65 record"
msgstr "不良的 ATN65 記錄"

#: ieee.c:4171
#, c-format
msgid "IEEE numeric overflow: 0x"
msgstr "IEEE 數值溢出：0x"

#: ieee.c:4215
#, c-format
msgid "IEEE string length overflow: %u\n"
msgstr "IEEE 字串長度溢出：%u\n"

#: ieee.c:5212
#, c-format
msgid "IEEE unsupported integer type size %u\n"
msgstr "IEEE 不支援的整數類型大小 %u\n"

#: ieee.c:5246
#, c-format
msgid "IEEE unsupported float type size %u\n"
msgstr "IEEE 不支援的浮點類型大小 %u\n"

#: ieee.c:5280
#, c-format
msgid "IEEE unsupported complex type size %u\n"
msgstr "IEEE 不支援的複數類型大小 %u\n"

#: mclex.c:241
msgid "Duplicate symbol entered into keyword list."
msgstr ""

#: nlmconv.c:273 srconv.c:1822
msgid "input and output files must be different"
msgstr "輸入輸出檔案必須不同"

#: nlmconv.c:320
msgid "input file named both on command line and with INPUT"
msgstr "同時在命令列和 INPUT 中輸入檔案名稱"

#: nlmconv.c:329
msgid "no input file"
msgstr "沒有輸入檔案"

#: nlmconv.c:359
msgid "no name for output file"
msgstr "輸出檔案沒有名稱"

#: nlmconv.c:373
msgid "warning: input and output formats are not compatible"
msgstr "警告：輸入和輸出格式不相容"

#: nlmconv.c:403
msgid "make .bss section"
msgstr "產生 .bss 區段"

#: nlmconv.c:413
msgid "make .nlmsections section"
msgstr "產生 .nlmsections 區段"

#: nlmconv.c:441
msgid "set .bss vma"
msgstr "設定 .bss vma"

#: nlmconv.c:448
msgid "set .data size"
msgstr "設定 .data 的大小"

#: nlmconv.c:628
#, c-format
msgid "warning: symbol %s imported but not in import list"
msgstr "警告：導入的符號 %s 不在導入列表中"

#: nlmconv.c:648
msgid "set start address"
msgstr "設定起始位址"

#: nlmconv.c:697
#, c-format
msgid "warning: START procedure %s not defined"
msgstr "警告：未定義 START 子程序 %s"

#: nlmconv.c:699
#, c-format
msgid "warning: EXIT procedure %s not defined"
msgstr "警告：未定義 EXIT 子程序 %s"

#: nlmconv.c:701
#, c-format
msgid "warning: CHECK procedure %s not defined"
msgstr "警告：未定義 CHECK 子程序 %s"

#: nlmconv.c:721 nlmconv.c:907
msgid "custom section"
msgstr "自訂區段"

#: nlmconv.c:741 nlmconv.c:936
msgid "help section"
msgstr "輔助區段"

#: nlmconv.c:763 nlmconv.c:954
msgid "message section"
msgstr "訊息區段"

#: nlmconv.c:778 nlmconv.c:987
msgid "module section"
msgstr "模組區段"

#: nlmconv.c:797 nlmconv.c:1003
msgid "rpc section"
msgstr "rpc 區段"

#. There is no place to record this information.
#: nlmconv.c:833
#, c-format
msgid "%s: warning: shared libraries can not have uninitialized data"
msgstr "%s：警告：共享函式庫不能含有未初始化的資料"

#: nlmconv.c:854 nlmconv.c:1022
msgid "shared section"
msgstr "共享區段"

#: nlmconv.c:862
msgid "warning: No version number given"
msgstr "警告：未指定版本號"

#: nlmconv.c:902 nlmconv.c:931 nlmconv.c:949 nlmconv.c:998 nlmconv.c:1017
#, c-format
msgid "%s: read: %s"
msgstr "%s：讀取：%s"

#: nlmconv.c:924
msgid "warning: FULLMAP is not supported; try ld -M"
msgstr "警告：不支援 FULLMAP；請試用 ld -M"

#: nlmconv.c:1100
#, c-format
msgid "Usage: %s [option(s)] [in-file [out-file]]\n"
msgstr "用法：%s [選項] [輸入檔案 [輸出檔案]]\n"

#: nlmconv.c:1101
#, c-format
msgid " Convert an object file into a NetWare Loadable Module\n"
msgstr " 將物件檔案轉換為  NetWare 可載入模組\n"

#: nlmconv.c:1102
#, fuzzy, c-format
msgid ""
" The options are:\n"
"  -I --input-target=<bfdname>   Set the input binary file format\n"
"  -O --output-target=<bfdname>  Set the output binary file format\n"
"  -T --header-file=<file>       Read <file> for NLM header information\n"
"  -l --linker=<linker>          Use <linker> for any linking\n"
"  -d --debug                    Display on stderr the linker command line\n"
"  @<file>                       Read options from <file>.\n"
"  -h --help                     Display this information\n"
"  -v --version                  Display the program's version\n"
msgstr ""
" 選項為：\n"
"  -I --input-target=<bfdname>   設定輸入二進位檔案格式\n"
"  -O --output-target=<bfdname>  設定輸出二進位檔案格式\n"
"  -T --header-file=<file>       從 <file> 中讀入 NLM 頭資訊\n"
"  -l --linker=<linker>          在所有連接中使用 <linker>\n"
"  -d --debug                    在標準錯誤輸出中顯示連接器命令列\n"
"  -h --help                     顯示本資訊\n"
"  -v --version                  顯示程式的版本號\n"

#: nlmconv.c:1143
#, c-format
msgid "support not compiled in for %s"
msgstr "未將對於 %s 的支援編譯進去"

#: nlmconv.c:1180
msgid "make section"
msgstr "製作區段"

#: nlmconv.c:1194
msgid "set section size"
msgstr "設定區段大小"

#: nlmconv.c:1200
msgid "set section alignment"
msgstr "設定區段對齊"

#: nlmconv.c:1204
msgid "set section flags"
msgstr "設定區段旗標"

#: nlmconv.c:1215
msgid "set .nlmsections size"
msgstr "設定 .nlmsections 大小"

#: nlmconv.c:1296 nlmconv.c:1304 nlmconv.c:1313 nlmconv.c:1318
msgid "set .nlmsection contents"
msgstr "設定 .nlmsection 內容"

#: nlmconv.c:1795
msgid "stub section sizes"
msgstr "佔位區段大小"

#: nlmconv.c:1842
msgid "writing stub"
msgstr "正在寫入佔位區段"

#: nlmconv.c:1926
#, c-format
msgid "unresolved PC relative reloc against %s"
msgstr "無法解析的以 %s 為準之 PC 相對重定位"

#: nlmconv.c:1990
#, c-format
msgid "overflow when adjusting relocation against %s"
msgstr "以 %s 為準對齊重定位時發生溢出"

#: nlmconv.c:2117
#, c-format
msgid "%s: execution of %s failed: "
msgstr "%s：執行 %s 失敗："

#: nlmconv.c:2132
#, c-format
msgid "Execution of %s failed"
msgstr "執行 %s 失敗"

#: nm.c:220 size.c:78 strings.c:659
#, c-format
msgid "Usage: %s [option(s)] [file(s)]\n"
msgstr "用法：%s [選項] [檔案]\n"

#: nm.c:221
#, c-format
msgid " List symbols in [file(s)] (a.out by default).\n"
msgstr "列舉 [檔案] 中的符號 (預設為 a.out)。\n"

#: nm.c:222
#, fuzzy, c-format
msgid ""
" The options are:\n"
"  -a, --debug-syms       Display debugger-only symbols\n"
"  -A, --print-file-name  Print name of the input file before every symbol\n"
"  -B                     Same as --format=bsd\n"
"  -C, --demangle[=STYLE] Decode low-level symbol names into user-level names\n"
"                          The STYLE, if specified, can be `auto' (the default),\n"
"                          `gnu', `lucid', `arm', `hp', `edg', `gnu-v3', `java'\n"
"                          or `gnat'\n"
"      --no-demangle      Do not demangle low-level symbol names\n"
"  -D, --dynamic          Display dynamic symbols instead of normal symbols\n"
"      --defined-only     Display only defined symbols\n"
"  -e                     (ignored)\n"
"  -f, --format=FORMAT    Use the output format FORMAT.  FORMAT can be `bsd',\n"
"                           `sysv' or `posix'.  The default is `bsd'\n"
"  -g, --extern-only      Display only external symbols\n"
"  -l, --line-numbers     Use debugging information to find a filename and\n"
"                           line number for each symbol\n"
"  -n, --numeric-sort     Sort symbols numerically by address\n"
"  -o                     Same as -A\n"
"  -p, --no-sort          Do not sort the symbols\n"
"  -P, --portability      Same as --format=posix\n"
"  -r, --reverse-sort     Reverse the sense of the sort\n"
msgstr ""
" 選項為：\n"
"  -a, --debug-syms       顯示只用於除錯的符號\n"
"  -A, --print-file-name  在每個符號前印出輸入檔案名\n"
"  -B                     與 --format=bsd 相同\n"
"  -C, --demangle[=STYLE] 將低階符號名稱解碼為用戶階層名稱\n"
"                          如果指定 STYLE，STYLE 可能為「auto」(預設)、\n"
"                         「gnu」、「lucid」、「arm」、「hp」、「edg」、\n"
"                         「gnu-v3」、「java」或「gnat」\n"
"      --no-demangle      不要解碼低階符號名稱\n"
"  -D, --dynamic          顯示動態符號而不是普通符號\n"
"      --defined-only     只顯示已定義的符號\n"
"  -e                     (忽略)\n"
"  -f, --format=FORMAT    使用輸出格式 FORMAT。FORMAT 可能是「bsd」、\n"
"                          「sysv」或「posix」。預設為「bsd」\n"
"  -g, --extern-only      只顯示外部符號\n"
"  -l, --line-numbers     使用除錯資訊以便為每個符號尋找檔案名和列號\n"
"  -n, --numeric-sort     按位址排序符號\n"
"  -o                     與 -A 相同\n"
"  -p, --no-sort          不要對符號進行排序\n"
"  -P, --portability      與 --format=posix 相同\n"
"  -r, --reverse-sort     反轉排序順序\n"
"  -S, --print-size       列印定義了的符號的大小\n"
"  -s, --print-armap      列印保存檔成員中符號的索引\n"
"      --size-sort        按大小排序符號\n"
"      --special-syms     在輸出中包含特殊符號\n"
"      --synthetic        同樣也顯示合成的符號\n"
"  -t, --radix=RADIX      將 RADIX 用於印出符號值\n"
"      --target=BFDNAME   將標的目標物件格式指定為 BFDNAME\n"
"  -u, --undefined-only   只顯示未定義的符號\n"
"  -X 32_64               (忽略)\n"
"  -h, --help             顯示本資訊\n"
"  -V, --version          顯示本程式的版本號碼\n"
"\n"

#: nm.c:245
#, c-format
msgid "      --plugin NAME      Load the specified plugin\n"
msgstr ""

#: nm.c:248
#, c-format
msgid ""
"  -S, --print-size       Print size of defined symbols\n"
"\t\t  -s, --print-armap      Include index for symbols from archive members\n"
"      --size-sort        Sort symbols by size\n"
"      --special-syms     Include special symbols in the output\n"
"      --synthetic        Display synthetic symbols as well\n"
"  -t, --radix=RADIX      Use RADIX for printing symbol values\n"
"      --target=BFDNAME   Specify the target object format as BFDNAME\n"
"  -u, --undefined-only   Display only undefined symbols\n"
"  -X 32_64               (ignored)\n"
"  @FILE                  Read options from FILE\n"
"  -h, --help             Display this information\n"
"  -V, --version          Display this program's version number\n"
"\n"
msgstr ""

#: nm.c:292
#, c-format
msgid "%s: invalid radix"
msgstr "%s：無效的基數"

#: nm.c:316
#, c-format
msgid "%s: invalid output format"
msgstr "%s：無效的輸出格式"

#: nm.c:337 readelf.c:7016 readelf.c:7061
#, c-format
msgid "<processor specific>: %d"
msgstr "<特定處理器>：%d"

#: nm.c:339 readelf.c:7025 readelf.c:7079
#, c-format
msgid "<OS specific>: %d"
msgstr "<特定作業系統>：%d"

#: nm.c:341 readelf.c:7028 readelf.c:7082
#, c-format
msgid "<unknown>: %d"
msgstr "<未知>：%d"

#: nm.c:381
#, c-format
msgid ""
"\n"
"Archive index:\n"
msgstr ""
"\n"
"保存檔索引：\n"

#: nm.c:1242
#, c-format
msgid ""
"\n"
"\n"
"Undefined symbols from %s:\n"
"\n"
msgstr ""
"\n"
"\n"
"來自 %s 的未定義符號：\n"
"\n"

#: nm.c:1244
#, c-format
msgid ""
"\n"
"\n"
"Symbols from %s:\n"
"\n"
msgstr ""
"\n"
"\n"
"來自 %s 的符號：\n"
"\n"

#: nm.c:1246 nm.c:1297
#, c-format
msgid ""
"Name                  Value   Class        Type         Size     Line  Section\n"
"\n"
msgstr ""
"名稱                  值      類別         型態         大小     列號  區段\n"
"\n"

#: nm.c:1249 nm.c:1300
#, c-format
msgid ""
"Name                  Value           Class        Type         Size             Line  Section\n"
"\n"
msgstr ""
"名稱                  值              類別         型態         大小             列號  區段\n"
"\n"

#: nm.c:1293
#, c-format
msgid ""
"\n"
"\n"
"Undefined symbols from %s[%s]:\n"
"\n"
msgstr ""
"\n"
"\n"
"來自 %s[%s] 的未定義的符號：\n"
"\n"

#: nm.c:1295
#, c-format
msgid ""
"\n"
"\n"
"Symbols from %s[%s]:\n"
"\n"
msgstr ""
"\n"
"\n"
"來自 %s[%s] 的符號：\n"
"\n"

#: nm.c:1387
#, c-format
msgid "Print width has not been initialized (%d)"
msgstr ""

#: nm.c:1615
msgid "Only -X 32_64 is supported"
msgstr "只支援 -X 32_64"

#: nm.c:1643
msgid "Using the --size-sort and --undefined-only options together"
msgstr "同時使用 --size-sort 與 --undefined-only 選項"

#: nm.c:1644
msgid "will produce no output, since undefined symbols have no size."
msgstr "由於未定義的符號不具大小，將不會產生輸出"

#: nm.c:1672
#, c-format
msgid "data size %ld"
msgstr "資料大小 %ld"

#: objcopy.c:463 srconv.c:1730
#, c-format
msgid "Usage: %s [option(s)] in-file [out-file]\n"
msgstr "用法：%s [選項] 輸入檔案 [輸出檔案]\n"

#: objcopy.c:464
#, c-format
msgid " Copies a binary file, possibly transforming it in the process\n"
msgstr " 複製二進位檔案，它可能在此過程中進行變換\n"

#: objcopy.c:465 objcopy.c:572
#, c-format
msgid " The options are:\n"
msgstr " 選項為：\n"

#: objcopy.c:466
#, fuzzy, c-format
msgid ""
"  -I --input-target <bfdname>      Assume input file is in format <bfdname>\n"
"  -O --output-target <bfdname>     Create an output file in format <bfdname>\n"
"  -B --binary-architecture <arch>  Set arch of output file, when input is binary\n"
"  -F --target <bfdname>            Set both input and output format to <bfdname>\n"
"     --debugging                   Convert debugging information, if possible\n"
"  -p --preserve-dates              Copy modified/access timestamps to the output\n"
"  -j --only-section <name>         Only copy section <name> into the output\n"
"     --add-gnu-debuglink=<file>    Add section .gnu_debuglink linking to <file>\n"
"  -R --remove-section <name>       Remove section <name> from the output\n"
"  -S --strip-all                   Remove all symbol and relocation information\n"
"  -g --strip-debug                 Remove all debugging symbols & sections\n"
"     --strip-unneeded              Remove all symbols not needed by relocations\n"
"  -N --strip-symbol <name>         Do not copy symbol <name>\n"
"     --strip-unneeded-symbol <name>\n"
"                                   Do not copy symbol <name> unless needed by\n"
"                                     relocations\n"
"     --only-keep-debug             Strip everything but the debug information\n"
"     --extract-symbol              Remove section contents but keep symbols\n"
"  -K --keep-symbol <name>          Do not strip symbol <name>\n"
"     --keep-file-symbols           Do not strip file symbol(s)\n"
"     --localize-hidden             Turn all ELF hidden symbols into locals\n"
"  -L --localize-symbol <name>      Force symbol <name> to be marked as a local\n"
"     --globalize-symbol <name>     Force symbol <name> to be marked as a global\n"
"  -G --keep-global-symbol <name>   Localize all symbols except <name>\n"
"  -W --weaken-symbol <name>        Force symbol <name> to be marked as a weak\n"
"     --weaken                      Force all global symbols to be marked as weak\n"
"  -w --wildcard                    Permit wildcard in symbol comparison\n"
"  -x --discard-all                 Remove all non-global symbols\n"
"  -X --discard-locals              Remove any compiler-generated symbols\n"
"  -i --interleave <number>         Only copy one out of every <number> bytes\n"
"  -b --byte <num>                  Select byte <num> in every interleaved block\n"
"     --gap-fill <val>              Fill gaps between sections with <val>\n"
"     --pad-to <addr>               Pad the last section up to address <addr>\n"
"     --set-start <addr>            Set the start address to <addr>\n"
"    {--change-start|--adjust-start} <incr>\n"
"                                   Add <incr> to the start address\n"
"    {--change-addresses|--adjust-vma} <incr>\n"
"                                   Add <incr> to LMA, VMA and start addresses\n"
"    {--change-section-address|--adjust-section-vma} <name>{=|+|-}<val>\n"
"                                   Change LMA and VMA of section <name> by <val>\n"
"     --change-section-lma <name>{=|+|-}<val>\n"
"                                   Change the LMA of section <name> by <val>\n"
"     --change-section-vma <name>{=|+|-}<val>\n"
"                                   Change the VMA of section <name> by <val>\n"
"    {--[no-]change-warnings|--[no-]adjust-warnings}\n"
"                                   Warn if a named section does not exist\n"
"     --set-section-flags <name>=<flags>\n"
"                                   Set section <name>'s properties to <flags>\n"
"     --add-section <name>=<file>   Add section <name> found in <file> to output\n"
"     --rename-section <old>=<new>[,<flags>] Rename section <old> to <new>\n"
"     --long-section-names {enable|disable|keep}\n"
"                                   Handle long section names in Coff objects.\n"
"     --change-leading-char         Force output format's leading character style\n"
"     --remove-leading-char         Remove leading character from global symbols\n"
"     --reverse-bytes=<num>         Reverse <num> bytes at a time, in output sections with content\n"
"     --redefine-sym <old>=<new>    Redefine symbol name <old> to <new>\n"
"     --redefine-syms <file>        --redefine-sym for all symbol pairs \n"
"                                     listed in <file>\n"
"     --srec-len <number>           Restrict the length of generated Srecords\n"
"     --srec-forceS3                Restrict the type of generated Srecords to S3\n"
"     --strip-symbols <file>        -N for all symbols listed in <file>\n"
"     --strip-unneeded-symbols <file>\n"
"                                   --strip-unneeded-symbol for all symbols listed\n"
"                                     in <file>\n"
"     --keep-symbols <file>         -K for all symbols listed in <file>\n"
"     --localize-symbols <file>     -L for all symbols listed in <file>\n"
"     --globalize-symbols <file>    --globalize-symbol for all in <file>\n"
"     --keep-global-symbols <file>  -G for all symbols listed in <file>\n"
"     --weaken-symbols <file>       -W for all symbols listed in <file>\n"
"     --alt-machine-code <index>    Use the target's <index>'th alternative machine\n"
"     --writable-text               Mark the output text as writable\n"
"     --readonly-text               Make the output text write protected\n"
"     --pure                        Mark the output file as demand paged\n"
"     --impure                      Mark the output file as impure\n"
"     --prefix-symbols <prefix>     Add <prefix> to start of every symbol name\n"
"     --prefix-sections <prefix>    Add <prefix> to start of every section name\n"
"     --prefix-alloc-sections <prefix>\n"
"                                   Add <prefix> to start of every allocatable\n"
"                                     section name\n"
"     --file-alignment <num>        Set PE file alignment to <num>\n"
"     --heap <reserve>[,<commit>]   Set PE reserve/commit heap to <reserve>/\n"
"                                   <commit>\n"
"     --image-base <address>        Set PE image base to <address>\n"
"     --section-alignment <num>     Set PE section alignment to <num>\n"
"     --stack <reserve>[,<commit>]  Set PE reserve/commit stack to <reserve>/\n"
"                                   <commit>\n"
"     --subsystem <name>[:<version>]\n"
"                                   Set PE subsystem to <name> [& <version>]\n"
"]  -v --verbose                     List all object files modified\n"
"  @<file>                          Read options from <file>\n"
"  -V --version                     Display this program's version number\n"
"  -h --help                        Display this output\n"
"     --info                        List object formats & architectures supported\n"
msgstr ""
"  -I --input-target <bfdname>      假定輸入檔案的格式為 <bfdname>\n"
"  -O --output-target <bfdname>     建立格式為 <bfdname> 的輸出檔案\n"
"  -B --binary-architecture <arch>  當輸入檔案為二進位檔案時，設定輸出檔案的系統架構\n"
"  -F --target <bfdname>            將輸入輸出格式設定為 <bfdname>\n"
"     --debugging                   如果可能，轉換除錯資訊\n"
"  -p --preserve-dates              將修改/存取時間戳記複製到輸出檔案\n"
"  -j --only-section <name>         只將 <name> 區段複製到輸出檔案中\n"
"     --add-gnu-debuglink=<file>    添加區段 .gnu_debuglink 的連結到 <file>\n"
"  -R --remove-section <name>       從輸出中刪除 <name> 區段\n"
"  -S --strip-all                   除去所有符號和重定位資訊\n"
"  -g --strip-debug                 除去所有除錯符號\n"
"     --strip-unneeded              除去所有重定位不需要的符號\n"
"  -N --strip-symbol <name>         不要複製符號 <name>\n"
"     --strip-unneeded-symbol <name>\n"
"                                   不要複製符號 <name> 除非重定位時需要\n"
"     --only-keep-debug             除去除錯相關以外的所有資訊\n"
"  -K --keep-symbol <name>          只複製符號 <name>\n"
"  -L --localize-symbol <name>      將符號 <name> 強制標識為本地符號\n"
"  -G --keep-global-symbol <name>   將除了 <name> 以外的所有符號標識為本地\n"
"  -W --weaken-symbol <name>        將符號 <name> 強制標識為弱符號\n"
"     --weaken                      將所有全域符號標識為弱符號\n"
"  -x --discard-all                 刪除所有非全域符號\n"
"  -X --discard-locals              刪除所有編譯器產生的符號\n"
"  -i --interleave <number>         只在每 <number> 個位元組中複製一個\n"
"  -b --byte <num>                  在每個插入區塊中選擇位元組 <num>\n"
"     --gap-fill <val>              在區段空隙中以 <val> 填充\n"
"     --pad-to <addr>               補充最後一區段直到位址 <addr>\n"
"     --set-start <addr>            將起始位址設置為 <addr>\n"
"    {--change-start|--adjust-start} <incr>\n"
"                                   將 <incr> 增加到起始位址\n"
"    {--change-addresses|--adjust-vma} <incr>\n"
"                                   將 <incr> 增加到 LMA、VMA 和起始位址\n"
"    {--change-section-address|--adjust-section-vma} <name>{=|+|-}<val>\n"
"                                   以 <val> 修改 <name> 區段的 LMA 和 VMA\n"
"     --change-section-lma <name>{=|+|-}<val>\n"
"                                   以 <val> 修改 <name> 區段的 LMA\n"
"     --change-section-vma <name>{=|+|-}<val>\n"
"                                   以 <val> 修改 <name> 區段的 VMA\n"
"    {--[no-]change-warnings|--[no-]adjust-warnings}\n"
"                                   如果命名區段不存在就產生警告\n"
"     --set-section-flags <name>=<flags>\n"
"                                   將 <name> 區段的屬性設置為 <flags>\n"
"     --add-section <name>=<file>   將 <file> 中的 <name> 區段添加到輸出中\n"
"     --rename-section <old>=<new>[,<flags>] 將區段由 <old> 改名為 <new>\n"
"     --change-leading-char         強行設定輸出格式的前導字元風格\n"
"     --remove-leading-char         刪除全域符號的前導字元\n"
"     --redefine-sym <old>=<new>    將符號由 <old> 改名為 <new>\n"
"     --redefine-syms <file>        對所有列於 <file> 中的符號執行 --redefine-sym\n"
"     --srec-len <number>           限制所產生 Srecords 的長度\n"
"     --srec-forceS3                將所產生 Srecords 的類型限制為 S3\n"
"     --strip-symbols <file>        對列舉在 <file> 中的所有符號執行 -N\n"
"     --strip-unneeded-symbols <file>\n"
"                                   對所有列於 <file> 中的符號執行 --strip-unneeded-symbol\n"
"     --keep-symbols <file>         對列舉在 <file> 中的所有符號執行 -K\n"
"     --localize-symbols <file>     對列舉在 <file> 中的所有符號執行 -L\n"
"     --keep-global-symbols <file>  對列舉在 <file> 中的所有符號執行 -G\n"
"     --weaken-symbols <file>       對列舉在 <file> 中的所有符號執行 -W\n"
"     --alt-machine-code <index>    輸出使用替代的機器碼\n"
"     --writable-text               將輸出文字標記為可寫\n"
"     --readonly-text               將輸出文字標記為防寫\n"
"     --pure                        將輸出檔案標記為需要分頁\n"
"     --impure                      將輸出檔案標記為混雜的\n"
"     --prefix-symbols <prefix>     添加 <prefix> 至每個符號名稱的前端\n"
"     --prefix-sections <prefix>    添加 <prefix> 至每個區段名稱的前端\n"
"     --prefix-alloc-sections <prefix>\n"
"                                   添加 <prefix> 至每個定位表區段名稱的前端\n"
"  -v --verbose                     列出所有修改的目標檔案\n"
"  -V --version                     顯示本程序的版本號碼\n"
"  -h --help                        顯示本輸出\n"
"     --info                        列出支援的物件格式 & 系統架構\n"

#: objcopy.c:570
#, c-format
msgid "Usage: %s <option(s)> in-file(s)\n"
msgstr "用法：%s <選項> 輸入檔案\n"

#: objcopy.c:571
#, c-format
msgid " Removes symbols and sections from files\n"
msgstr "從檔案中刪除符號和區段\n"

#: objcopy.c:573
#, fuzzy, c-format
msgid ""
"  -I --input-target=<bfdname>      Assume input file is in format <bfdname>\n"
"  -O --output-target=<bfdname>     Create an output file in format <bfdname>\n"
"  -F --target=<bfdname>            Set both input and output format to <bfdname>\n"
"  -p --preserve-dates              Copy modified/access timestamps to the output\n"
"  -R --remove-section=<name>       Remove section <name> from the output\n"
"  -s --strip-all                   Remove all symbol and relocation information\n"
"  -g -S -d --strip-debug           Remove all debugging symbols & sections\n"
"     --strip-unneeded              Remove all symbols not needed by relocations\n"
"     --only-keep-debug             Strip everything but the debug information\n"
"  -N --strip-symbol=<name>         Do not copy symbol <name>\n"
"  -K --keep-symbol=<name>          Do not strip symbol <name>\n"
"     --keep-file-symbols           Do not strip file symbol(s)\n"
"  -w --wildcard                    Permit wildcard in symbol comparison\n"
"  -x --discard-all                 Remove all non-global symbols\n"
"  -X --discard-locals              Remove any compiler-generated symbols\n"
"  -v --verbose                     List all object files modified\n"
"  -V --version                     Display this program's version number\n"
"  -h --help                        Display this output\n"
"     --info                        List object formats & architectures supported\n"
"  -o <file>                        Place stripped output into <file>\n"
msgstr ""
"  -I --input-target=<bfdname>      假定輸入檔案的格式為 <bfdname>\n"
"  -O --output-target=<bfdname>     建立格式為 <bfdname> 的輸出檔案\n"
"  -F --target=<bfdname>            將輸入和輸出的格式設定為 <bfdname>\n"
"  -p --preserve-dates              將 修改/存取 時間戳複製到輸出檔案\n"
"  -R --remove-section=<name>       從輸出中刪除 <name> 區段\n"
"  -s --strip-all                   除去所有符號和重定位資訊\n"
"  -g -S -d --strip-debug           除去所有除錯符號\n"
"     --strip-unneeded              除去所有重定位不需要的符號\n"
"     --only-keep-debug             除去除錯以外的所有資訊\n"
"  -N --strip-symbol=<name>         不要複製符號 <name>\n"
"  -K --keep-symbol=<name>          只複製符號 <name>\n"
"  -w --wildcard                    符號比較時容許萬用字元\n"
"  -x --discard-all                 刪除所有非全域符號\n"
"  -X --discard-locals              刪除所有編譯器產生的符號\n"
"  -v --verbose                     列出所有修改過的目標檔案\n"
"  -V --version                     顯示本程序的版本號碼\n"
"  -h --help                        顯示本輸出\n"
"     --info                        列出支援的物件格式 & 系統架構\n"
"  -o <file>                        將 strip 過的輸出置於 <file>\n"

#: objcopy.c:646
#, c-format
msgid "unrecognized section flag `%s'"
msgstr "不能識別的區段旗標「%s」"

#: objcopy.c:647
#, c-format
msgid "supported flags: %s"
msgstr "支援的旗標：%s"

#: objcopy.c:748
#, c-format
msgid "cannot open '%s': %s"
msgstr "無法開啟：%s：%s"

#: objcopy.c:751 objcopy.c:3336
#, c-format
msgid "%s: fread failed"
msgstr "%s：fread 失敗"

#: objcopy.c:824
#, c-format
msgid "%s:%d: Ignoring rubbish found on this line"
msgstr "%s:%d: 忽略本列所含無用資料"

#: objcopy.c:1121
#, c-format
msgid "not stripping symbol `%s' because it is named in a relocation"
msgstr ""

#: objcopy.c:1204
#, c-format
msgid "%s: Multiple redefinition of symbol \"%s\""
msgstr "%s：多次重複定義符號「%s」"

#: objcopy.c:1208
#, c-format
msgid "%s: Symbol \"%s\" is target of more than one redefinition"
msgstr "%s：符號「%s」是多次重複定義的標的"

#: objcopy.c:1236
#, c-format
msgid "couldn't open symbol redefinition file %s (error: %s)"
msgstr "無法開啟符號重定義檔 %s (錯誤: %s)"

#: objcopy.c:1314
#, c-format
msgid "%s:%d: garbage found at end of line"
msgstr "%s:%d: 列尾出現無用字元"

#: objcopy.c:1317
#, c-format
msgid "%s:%d: missing new symbol name"
msgstr "%s:%d: 缺少新的符號名稱"

#: objcopy.c:1327
#, c-format
msgid "%s:%d: premature end of file"
msgstr "%s:%d: 檔案末尾不完整"

#: objcopy.c:1353
#, fuzzy, c-format
msgid "stat returns negative size for `%s'"
msgstr "stat 回傳 %s 的大小為負數"

#: objcopy.c:1365
#, c-format
msgid "copy from `%s' [unknown] to `%s' [unknown]\n"
msgstr ""

#: objcopy.c:1420
msgid "Unable to change endianness of input file(s)"
msgstr "無法改變輸入檔案的結尾格式"

#: objcopy.c:1429
#, fuzzy, c-format
msgid "copy from `%s' [%s] to `%s' [%s]\n"
msgstr "從 %s(%s) 複製到 %s(%s)\n"

#: objcopy.c:1474
#, fuzzy, c-format
msgid "Unable to recognise the format of the input file `%s'"
msgstr "無法確認輸入檔案 %s 的格式"

#: objcopy.c:1477
#, fuzzy, c-format
msgid "Warning: Output file cannot represent architecture `%s'"
msgstr "警告：輸出檔案無法代表系統架構 %s"

#: objcopy.c:1540
#, c-format
msgid "warning: file alignment (0x%s) > section alignment (0x%s)"
msgstr ""

#: objcopy.c:1599
#, fuzzy, c-format
msgid "can't add section '%s'"
msgstr "無法建立區段「%s」：%s"

#: objcopy.c:1608
#, fuzzy, c-format
msgid "can't create section `%s'"
msgstr "無法建立區段「%s」：%s"

#: objcopy.c:1654
#, fuzzy, c-format
msgid "cannot create debug link section `%s'"
msgstr "%s：無法建立除錯區段：%s"

#: objcopy.c:1747
#, fuzzy
msgid "Can't fill gap after section"
msgstr "無法填充 %s 之後的間隙：%s"

#: objcopy.c:1771
#, fuzzy
msgid "can't add padding"
msgstr "無法添加 %s 旁邊的空隙：%s"

#: objcopy.c:1862
#, fuzzy, c-format
msgid "cannot fill debug link section `%s'"
msgstr "%s：無法建立除錯區段：%s"

#: objcopy.c:1925
#, fuzzy
msgid "error copying private BFD data"
msgstr "%s：複製 BFD 私有資料出錯：%s"

#: objcopy.c:1936
#, c-format
msgid "this target does not support %lu alternative machine codes"
msgstr ""

#: objcopy.c:1940
msgid "treating that number as an absolute e_machine value instead"
msgstr ""

#: objcopy.c:1944
msgid "ignoring the alternative value"
msgstr ""

#: objcopy.c:1975 objcopy.c:2010
#, fuzzy, c-format
msgid "cannot create tempdir for archive copying (error: %s)"
msgstr "無法為保存檔複製建立目錄 %s (錯誤：%s)"

#: objcopy.c:2071
#, fuzzy
msgid "Unable to recognise the format of file"
msgstr "無法確認輸入檔案 %s 的格式"

#: objcopy.c:2168
#, c-format
msgid "error: the input file '%s' is empty"
msgstr ""

#: objcopy.c:2300
#, c-format
msgid "Multiple renames of section %s"
msgstr "多次將區段 %s 改名"

#: objcopy.c:2351
#, fuzzy
msgid "error in private header data"
msgstr "私有標頭資料"

#: objcopy.c:2429
msgid "failed to create output section"
msgstr ""

#: objcopy.c:2443
#, fuzzy
msgid "failed to set size"
msgstr "設定區段大小"

#: objcopy.c:2457
msgid "failed to set vma"
msgstr ""

#: objcopy.c:2482
#, fuzzy
msgid "failed to set alignment"
msgstr "設定區段對齊"

#: objcopy.c:2516
#, fuzzy
msgid "failed to copy private data"
msgstr "%s：複製 BFD 私有資料出錯：%s"

#: objcopy.c:2598
msgid "relocation count is negative"
msgstr ""

#. User must pad the section up in order to do this.
#: objcopy.c:2659
#, c-format
msgid "cannot reverse bytes: length of section %s must be evenly divisible by %d"
msgstr ""

#: objcopy.c:2843
#, fuzzy
msgid "can't create debugging section"
msgstr "%s：無法建立除錯區段：%s"

#: objcopy.c:2856
#, fuzzy
msgid "can't set debugging section contents"
msgstr "%s：無法設定除錯區段內容：%s"

#: objcopy.c:2864
#, fuzzy, c-format
msgid "don't know how to write debugging information for %s"
msgstr "%s：不知道如何為 %s 寫入除錯資訊"

#: objcopy.c:3006
msgid "could not create temporary file to hold stripped copy"
msgstr ""

#: objcopy.c:3078
#, c-format
msgid "%s: bad version in PE subsystem"
msgstr ""

#: objcopy.c:3108
#, c-format
msgid "unknown PE subsystem: %s"
msgstr ""

#: objcopy.c:3168
msgid "byte number must be non-negative"
msgstr "位元組編號必須是非負數"

#: objcopy.c:3178
msgid "interleave must be positive"
msgstr "間斷值必須是正數。"

#: objcopy.c:3198 objcopy.c:3206
#, c-format
msgid "%s both copied and removed"
msgstr "即要複製 %s 又要刪除它"

#: objcopy.c:3307 objcopy.c:3381 objcopy.c:3481 objcopy.c:3512 objcopy.c:3536
#: objcopy.c:3540 objcopy.c:3560
#, c-format
msgid "bad format for %s"
msgstr "%s 格式錯誤"

#: objcopy.c:3331
#, c-format
msgid "cannot open: %s: %s"
msgstr "無法開啟：%s：%s"

#: objcopy.c:3450
#, c-format
msgid "Warning: truncating gap-fill from 0x%s to 0x%x"
msgstr "警告：將間隙填充由 0x%s 截短到 0x%x"

#: objcopy.c:3611
#, c-format
msgid "unknown long section names option '%s'"
msgstr ""

#: objcopy.c:3629
#, fuzzy
msgid "unable to parse alternative machine code"
msgstr "不明的額外機器碼，將它忽略"

#: objcopy.c:3674
#, fuzzy
msgid "number of bytes to reverse must be positive and even"
msgstr "間斷值必須是正數。"

#: objcopy.c:3677
#, c-format
msgid "Warning: ignoring previous --reverse-bytes value of %d"
msgstr ""

#: objcopy.c:3692
#, c-format
msgid "%s: invalid reserve value for --heap"
msgstr ""

#: objcopy.c:3698
#, fuzzy, c-format
msgid "%s: invalid commit value for --heap"
msgstr "%s：無效的輸出格式"

#: objcopy.c:3723
#, c-format
msgid "%s: invalid reserve value for --stack"
msgstr ""

#: objcopy.c:3729
#, fuzzy, c-format
msgid "%s: invalid commit value for --stack"
msgstr "%s：無效的輸出格式"

#: objcopy.c:3758
msgid "byte number must be less than interleave"
msgstr "位元組編號必須小於間斷值"

#: objcopy.c:3785
#, c-format
msgid "unknown input EFI target: %s"
msgstr ""

#: objcopy.c:3816
#, fuzzy, c-format
msgid "unknown output EFI target: %s"
msgstr "未知的格式類型「%s」"

#: objcopy.c:3841
#, c-format
msgid "architecture %s unknown"
msgstr "未知的系統架構 %s"

#: objcopy.c:3845
msgid "Warning: input target 'binary' required for binary architecture parameter."
msgstr "警告：二進位的系統架構參數需要輸入目標 'binary'"

#: objcopy.c:3846
#, c-format
msgid " Argument %s ignored"
msgstr " 忽略引數 %s"

#: objcopy.c:3852
#, c-format
msgid "warning: could not locate '%s'.  System error message: %s"
msgstr "警告：無法找到 '%s' 的位置。系統錯誤訊息為：%s"

#: objcopy.c:3863
#, c-format
msgid "warning: could not create temporary file whilst copying '%s', (error: %s)"
msgstr ""

#: objcopy.c:3891 objcopy.c:3905
#, c-format
msgid "%s %s%c0x%s never used"
msgstr "%s %s%c0x%s 完全沒用過"

#: objdump.c:187
#, c-format
msgid "Usage: %s <option(s)> <file(s)>\n"
msgstr "用法：%s <選項> <檔案>\n"

#: objdump.c:188
#, c-format
msgid " Display information from object <file(s)>.\n"
msgstr " 顯示來自目標 <檔案> 的資訊。\n"

#: objdump.c:189
#, c-format
msgid " At least one of the following switches must be given:\n"
msgstr " 至少必須指定以下選項之一：\n"

#: objdump.c:190
#, fuzzy, c-format
msgid ""
"  -a, --archive-headers    Display archive header information\n"
"  -f, --file-headers       Display the contents of the overall file header\n"
"  -p, --private-headers    Display object format specific file header contents\n"
"  -h, --[section-]headers  Display the contents of the section headers\n"
"  -x, --all-headers        Display the contents of all headers\n"
"  -d, --disassemble        Display assembler contents of executable sections\n"
"  -D, --disassemble-all    Display assembler contents of all sections\n"
"  -S, --source             Intermix source code with disassembly\n"
"  -s, --full-contents      Display the full contents of all sections requested\n"
"  -g, --debugging          Display debug information in object file\n"
"  -e, --debugging-tags     Display debug information using ctags style\n"
"  -G, --stabs              Display (in raw form) any STABS info in the file\n"
"  -W[lLiaprmfFsoR] or\n"
"  --dwarf[=rawline,=decodedline,=info,=abbrev,=pubnames,=aranges,=macro,=frames,=str,=loc,=Ranges]\n"
"                           Display DWARF info in the file\n"
"  -t, --syms               Display the contents of the symbol table(s)\n"
"  -T, --dynamic-syms       Display the contents of the dynamic symbol table\n"
"  -r, --reloc              Display the relocation entries in the file\n"
"  -R, --dynamic-reloc      Display the dynamic relocation entries in the file\n"
"  @<file>                  Read options from <file>\n"
"  -v, --version            Display this program's version number\n"
"  -i, --info               List object formats and architectures supported\n"
"  -H, --help               Display this information\n"
msgstr ""
"  -a, --archive-headers    顯示保存檔頭資訊\n"
"  -f, --file-headers       顯示整體檔案頭的內容\n"
"  -p, --private-headers    顯示目標格式特有的檔案頭內容\n"
"  -h, --[section-]headers  顯示區段頭的內容\n"
"  -x, --all-headers        顯示所有標頭的內容\n"
"  -d, --disassemble        顯示可執行區段的組譯內容\n"
"  -D, --disassemble-all    顯示所有區段的組譯內容\n"
"  -S, --source             將原始碼和反組譯混合起來\n"
"  -s, --full-contents      顯示所有請求區段的完整內容\n"
"  -g, --debugging          顯示目標檔案的除錯資訊\n"
"  -e, --debugging-tags     顯示使用 ctags 風格的除錯資訊\n"
"  -G, --stabs              以原始形式顯示檔案中所有的 STABS 資訊\n"
"  -t, --syms               顯示符號表的內容\n"
"  -T, --dynamic-syms       顯示動態符號表的內容\n"
"  -r, --reloc              顯示檔案中的重定位條目\n"
"  -R, --dynamic-reloc      顯示檔案中的動態重定位條目\n"
"  -v, --version            顯示本程式的版本號碼\n"
"  -i, --info               列舉支援的目標格式和系統架構\n"
"  -H, --help               顯示本資訊\n"

#: objdump.c:217
#, c-format
msgid ""
"\n"
" The following switches are optional:\n"
msgstr ""
"\n"
" 以下選項是可選的：\n"

#: objdump.c:218
#, fuzzy, c-format
msgid ""
"  -b, --target=BFDNAME           Specify the target object format as BFDNAME\n"
"  -m, --architecture=MACHINE     Specify the target architecture as MACHINE\n"
"  -j, --section=NAME             Only display information for section NAME\n"
"  -M, --disassembler-options=OPT Pass text OPT on to the disassembler\n"
"  -EB --endian=big               Assume big endian format when disassembling\n"
"  -EL --endian=little            Assume little endian format when disassembling\n"
"      --file-start-context       Include context from start of file (with -S)\n"
"  -I, --include=DIR              Add DIR to search list for source files\n"
"  -l, --line-numbers             Include line numbers and filenames in output\n"
"  -F, --file-offsets             Include file offsets when displaying information\n"
"  -C, --demangle[=STYLE]         Decode mangled/processed symbol names\n"
"                                  The STYLE, if specified, can be `auto', `gnu',\n"
"                                  `lucid', `arm', `hp', `edg', `gnu-v3', `java'\n"
"                                  or `gnat'\n"
"  -w, --wide                     Format output for more than 80 columns\n"
"  -z, --disassemble-zeroes       Do not skip blocks of zeroes when disassembling\n"
"      --start-address=ADDR       Only process data whose address is >= ADDR\n"
"      --stop-address=ADDR        Only process data whose address is <= ADDR\n"
"      --prefix-addresses         Print complete address alongside disassembly\n"
"      --[no-]show-raw-insn       Display hex alongside symbolic disassembly\n"
"      --insn-width=WIDTH         Display WIDTH bytes on a signle line for -d\n"
"      --adjust-vma=OFFSET        Add OFFSET to all displayed section addresses\n"
"      --special-syms             Include special symbols in symbol dumps\n"
"      --prefix=PREFIX            Add PREFIX to absolute paths for -S\n"
"      --prefix-strip=LEVEL       Strip initial directory names for -S\n"
"\n"
msgstr ""
"  -b, --target=BFDNAME           將目標物件檔案格式指定為 BFDNAME\n"
"  -m, --architecture=MACHINE     將目標系統架構指定為 MACHINE\n"
"  -j, --section=NAME             只顯示 NAME 區段的資訊\n"
"  -M, --disassembler-options=OPT 將文字傳遞到 OPT 反組譯程序\n"
"  -EB --endian=big               反組譯時假定高位位元組在前\n"
"  -EL --endian=little            反組譯時假定低位位元組在前\n"
"      --file-start-context       從檔案的起點引入上下文 (帶有 -S)\n"
"  -I, --include=DIR              將 DIR 加入搜尋原始碼檔案的列表\n"
"  -l, --line-numbers             在輸出中指定列號和檔案名\n"
"  -C, --demangle[=STYLE]         對於已損壞/處理過的符號名稱進行解碼\n"
"                                  如果指定了 STYLE，STYLE 可能為「auto」、「gnu」、\n"
"                                 「lucid」、「arm」、「hp」、「edg」、「gnu-v3」、「java」或「gnat」\n"
"  -w, --wide                     以多於 80 行的寬度對輸出進行格式化\n"
"  -z, --disassemble-zeroes       反組譯時不要跳過為零的區塊\n"
"      --start-address=ADDR       只有行程資料的位址 >= ADDR\n"
"      --stop-address=ADDR        只有行程資料的位址 <= ADDR\n"
"      --prefix-addresses         同反組譯代碼並列顯示完整的位址\n"
"      --[no-]show-raw-insn       同符號反組譯並列顯示十六進位值\n"
"      --adjust-vma=OFFSET        為所有顯示的區段位址增加 OFFSET\n"
"      --special-syms             在符號傾印中包含特殊符號\n"
"\n"

#: objdump.c:433
#, c-format
msgid "Sections:\n"
msgstr "區段：\n"

#: objdump.c:436 objdump.c:440
#, c-format
msgid "Idx Name          Size      VMA       LMA       File off  Algn"
msgstr "索引名稱          大小      VMA       LMA       檔案關閉  對齊"

#: objdump.c:442
#, c-format
msgid "Idx Name          Size      VMA               LMA               File off  Algn"
msgstr "索引名稱          大小      VMA               LMA               檔案關閉 對齊"

#: objdump.c:446
#, c-format
msgid "  Flags"
msgstr "  旗標"

#: objdump.c:448
#, c-format
msgid "  Pg"
msgstr "  頁"

#: objdump.c:491
#, c-format
msgid "%s: not a dynamic object"
msgstr "%s：不是動態物件"

#: objdump.c:916 objdump.c:940
#, fuzzy, c-format
msgid " (File Offset: 0x%lx)"
msgstr "  檔案：%lx"

#: objdump.c:1886
#, fuzzy, c-format
msgid ""
"\n"
"Disassembly of section %s:\n"
msgstr "反組譯 %s 區段：\n"

#: objdump.c:2062
#, c-format
msgid "Can't use supplied machine %s"
msgstr "無法使用支援的機器 %s"

#: objdump.c:2081
#, c-format
msgid "Can't disassemble for architecture %s\n"
msgstr "無法反組譯系統架構 %s\n"

#: objdump.c:2172
#, fuzzy, c-format
msgid ""
"\n"
"Can't get contents for section '%s'.\n"
msgstr "%s 區段的內容：\n"

#: objdump.c:2183
#, fuzzy, c-format
msgid ""
"\n"
"Can't uncompress section '%s'.\n"
msgstr "無法建立區段「%s」：%s"

#: objdump.c:2312
#, c-format
msgid ""
"No %s section present\n"
"\n"
msgstr ""
"%s 區段不存在\n"
"\n"

#: objdump.c:2321
#, c-format
msgid "Reading %s section of %s failed: %s"
msgstr "讀入 %2$s 的 %1$s 區段失敗：%3$s"

#: objdump.c:2365
#, c-format
msgid ""
"Contents of %s section:\n"
"\n"
msgstr ""
"%s 區段的內容：\n"
"\n"

#: objdump.c:2496
#, c-format
msgid "architecture: %s, "
msgstr "系統架構：%s，"

#: objdump.c:2499
#, c-format
msgid "flags 0x%08x:\n"
msgstr "旗標 0x%08x：\n"

#: objdump.c:2513
#, c-format
msgid ""
"\n"
"start address 0x"
msgstr ""
"\n"
"起始位址 0x"

#: objdump.c:2576
#, fuzzy, c-format
msgid "Contents of section %s:"
msgstr "%s 區段的內容：\n"

#: objdump.c:2578
#, fuzzy, c-format
msgid "  (Starting at file offset: 0x%lx)"
msgstr " (間接字串，偏移量：0x%lx)： %s"

#: objdump.c:2685
#, c-format
msgid "no symbols\n"
msgstr "無符號\n"

#: objdump.c:2692
#, c-format
msgid "no information for symbol number %ld\n"
msgstr "沒有關於符號號碼 %ld 的資訊\n"

#: objdump.c:2695
#, c-format
msgid "could not determine the type of symbol number %ld\n"
msgstr "無法確定符號號碼「%ld」的類型\n"

#: objdump.c:2975
#, c-format
msgid ""
"\n"
"%s:     file format %s\n"
msgstr ""
"\n"
"%s：     檔案格式 %s\n"

#: objdump.c:3033
#, c-format
msgid "%s: printing debugging information failed"
msgstr "%s：列印除錯資訊失敗"

#: objdump.c:3133
#, c-format
msgid "In archive %s:\n"
msgstr "在保存檔 %s 中：\n"

#: objdump.c:3249
msgid "error: the start address should be before the end address"
msgstr ""

#: objdump.c:3254
msgid "error: the stop address should be after the start address"
msgstr ""

#: objdump.c:3266
#, fuzzy
msgid "error: prefix strip must be non-negative"
msgstr "位元組編號必須是非負數"

#: objdump.c:3271
#, fuzzy
msgid "error: instruction width must be positive"
msgstr "額外機器碼索引值必須是正數。"

#: objdump.c:3280
msgid "unrecognized -E option"
msgstr "無法識別的 -E 選項"

#: objdump.c:3291
#, c-format
msgid "unrecognized --endian type `%s'"
msgstr "無法識別的 --endian 類型「%s」"

#: rclex.c:197
msgid "invalid value specified for pragma code_page.\n"
msgstr ""

#: rdcoff.c:198
#, c-format
msgid "parse_coff_type: Bad type code 0x%x"
msgstr "parse_coff_type：不良的類型碼 0x%x"

#: rdcoff.c:406 rdcoff.c:511 rdcoff.c:699
#, c-format
msgid "bfd_coff_get_syment failed: %s"
msgstr "bfd_coff_get_syment 失敗：%s"

#: rdcoff.c:422 rdcoff.c:719
#, c-format
msgid "bfd_coff_get_auxent failed: %s"
msgstr "bfd_coff_get_auxent 失敗：%s"

#: rdcoff.c:786
#, c-format
msgid "%ld: .bf without preceding function"
msgstr "%ld: .bf 未含前導函數"

#: rdcoff.c:836
#, c-format
msgid "%ld: unexpected .ef\n"
msgstr "%ld：意外的 .ef\n"

#: rddbg.c:88
#, c-format
msgid "%s: no recognized debugging information"
msgstr "%s：未識別的除錯資訊"

#: rddbg.c:402
#, c-format
msgid "Last stabs entries before error:\n"
msgstr "錯誤發生前最後的 stabs 進入點：\n"

#: readelf.c:297
#, fuzzy, c-format
msgid "Unable to seek to 0x%lx for %s\n"
msgstr "無法定位到 %2$s 的 0x%1$x\n"

#: readelf.c:312
#, fuzzy, c-format
msgid "Out of memory allocating 0x%lx bytes for %s\n"
msgstr "分配 0x%x 位元組給 %s 時產生記憶體不足\n"

#: readelf.c:322
#, fuzzy, c-format
msgid "Unable to read in 0x%lx bytes of %s\n"
msgstr "無法讀入 %2$s 的 0x%1$x 位元組\n"

#: readelf.c:645
msgid "Don't know about relocations on this machine architecture\n"
msgstr "不知道關於本機器系統架構中重定位的情況\n"

#: readelf.c:666 readelf.c:696 readelf.c:764 readelf.c:793
msgid "relocs"
msgstr "重定位"

#: readelf.c:678 readelf.c:708 readelf.c:775 readelf.c:804
#, fuzzy
msgid "out of memory parsing relocs\n"
msgstr "解析重定位時記憶體不足"

#: readelf.c:909
#, c-format
msgid " Offset     Info    Type                Sym. Value  Symbol's Name + Addend\n"
msgstr " 偏移量     資訊    類型                符號值      符號名稱 + 加數\n"

#: readelf.c:911
#, c-format
msgid " Offset     Info    Type            Sym.Value  Sym. Name + Addend\n"
msgstr " 偏移量     資訊    類型            符號值      符號名稱 + 加數\n"

#: readelf.c:916
#, c-format
msgid " Offset     Info    Type                Sym. Value  Symbol's Name\n"
msgstr " 偏移量     資訊    類型                符號值      符號名稱\n"

#: readelf.c:918
#, c-format
msgid " Offset     Info    Type            Sym.Value  Sym. Name\n"
msgstr " 偏移量     資訊    類型            符號值      符號名稱\n"

#: readelf.c:926
#, c-format
msgid "    Offset             Info             Type               Symbol's Value  Symbol's Name + Addend\n"
msgstr "    偏移量             資訊             類型               符號值          符號名稱 + 加數\n"

#: readelf.c:928
#, c-format
msgid "  Offset          Info           Type           Sym. Value    Sym. Name + Addend\n"
msgstr "  偏移量          資訊           類型           符號值        符號名稱 + 加數\n"

#: readelf.c:933
#, c-format
msgid "    Offset             Info             Type               Symbol's Value  Symbol's Name\n"
msgstr "    偏移量             資訊             類型               符號值          符號名稱\n"

#: readelf.c:935
#, c-format
msgid "  Offset          Info           Type           Sym. Value    Sym. Name\n"
msgstr "  偏移量          資訊           類型           符號值        符號名稱\n"

#: readelf.c:1222 readelf.c:1381 readelf.c:1389
#, c-format
msgid "unrecognized: %-7lx"
msgstr "不能識別的：%-7lx"

#: readelf.c:1247
#, fuzzy, c-format
msgid "<unknown addend: %lx>"
msgstr "<未知：%x>"

#: readelf.c:1339
#, c-format
msgid "<string table index: %3ld>"
msgstr "<字串表索引：%3ld>"

#: readelf.c:1341
#, c-format
msgid "<corrupt string table index: %3ld>"
msgstr "<毀損字串表索引：%3ld>"

#: readelf.c:1716
#, c-format
msgid "Processor Specific: %lx"
msgstr "特定處理器：%lx"

#: readelf.c:1740
#, c-format
msgid "Operating System specific: %lx"
msgstr "特定作業系統：%lx"

#: readelf.c:1744 readelf.c:2626
#, c-format
msgid "<unknown>: %lx"
msgstr "<未知>：%lx"

#: readelf.c:1757
msgid "NONE (None)"
msgstr "NONE (無)"

#: readelf.c:1758
msgid "REL (Relocatable file)"
msgstr "REL (可重定位檔案)"

#: readelf.c:1759
msgid "EXEC (Executable file)"
msgstr "EXEC (可執行檔案)"

#: readelf.c:1760
msgid "DYN (Shared object file)"
msgstr "DYN (共享物件檔案)"

#: readelf.c:1761
msgid "CORE (Core file)"
msgstr "CORE (核心檔案)"

#: readelf.c:1765
#, c-format
msgid "Processor Specific: (%x)"
msgstr "特定處理器：(%x)"

#: readelf.c:1767
#, c-format
msgid "OS Specific: (%x)"
msgstr "特定作業系統：(%x)"

#: readelf.c:1769 readelf.c:2843
#, c-format
msgid "<unknown>: %x"
msgstr "<未知>：%x"

#: readelf.c:1781
msgid "None"
msgstr "無"

#: readelf.c:1892
#, fuzzy, c-format
msgid "<unknown>: 0x%x"
msgstr "[<未知>: 0x%x]"

#: readelf.c:2149
#, fuzzy
msgid "unknown"
msgstr "<未知>：%d"

#: readelf.c:2150
#, fuzzy
msgid "unknown mac"
msgstr "未知的區段"

#: readelf.c:2463
msgid "Standalone App"
msgstr "獨立應用程式"

#: readelf.c:2466 readelf.c:3174 readelf.c:3190
#, c-format
msgid "<unknown: %x>"
msgstr "<未知：%x>"

#: readelf.c:2891
#, c-format
msgid "Usage: readelf <option(s)> elf-file(s)\n"
msgstr "用法：readelf <選項> elf-檔案\n"

#: readelf.c:2892
#, c-format
msgid " Display information about the contents of ELF format files\n"
msgstr " 顯示關於 ELF 格式檔案內容的資訊\n"

#: readelf.c:2893
#, fuzzy, c-format
msgid ""
" Options are:\n"
"  -a --all               Equivalent to: -h -l -S -s -r -d -V -A -I\n"
"  -h --file-header       Display the ELF file header\n"
"  -l --program-headers   Display the program headers\n"
"     --segments          An alias for --program-headers\n"
"  -S --section-headers   Display the sections' header\n"
"     --sections          An alias for --section-headers\n"
"  -g --section-groups    Display the section groups\n"
"  -t --section-details   Display the section details\n"
"  -e --headers           Equivalent to: -h -l -S\n"
"  -s --syms              Display the symbol table\n"
"      --symbols          An alias for --syms\n"
"  -n --notes             Display the core notes (if present)\n"
"  -r --relocs            Display the relocations (if present)\n"
"  -u --unwind            Display the unwind info (if present)\n"
"  -d --dynamic           Display the dynamic section (if present)\n"
"  -V --version-info      Display the version sections (if present)\n"
"  -A --arch-specific     Display architecture specific information (if any).\n"
"  -c --archive-index     Display the symbol/file index in an archive\n"
"  -D --use-dynamic       Use the dynamic section info when displaying symbols\n"
"  -x --hex-dump=<number|name>\n"
"                         Dump the contents of section <number|name> as bytes\n"
"  -p --string-dump=<number|name>\n"
"                         Dump the contents of section <number|name> as strings\n"
"  -R --relocated-dump=<number|name>\n"
"                         Dump the contents of section <number|name> as relocated bytes\n"
"  -w[lLiaprmfFsoR] or\n"
"  --debug-dump[=rawline,=decodedline,=info,=abbrev,=pubnames,=aranges,=macro,=frames,=str,=loc,=Ranges]\n"
"                         Display the contents of DWARF2 debug sections\n"
msgstr ""
" 選項為：\n"
"  -a --all               等同於：-h -l -S -s -r -d -V -A -I\n"
"  -h --file-header       顯示 ELF 檔案標頭\n"
"  -l --program-headers   顯示程式標頭\n"
"     --segments          --program-headers 的別名\n"
"  -S --section-headers   顯示區段標頭\n"
"     --sections          --section-headers 的別名\n"
"  -g --section-groups    顯示區段群組\n"
"  -e --headers           等同於：-h -l -S\n"
"  -s --syms              顯示符號表\n"
"      --symbols          --syms 的別名\n"
"  -n --notes             顯示核心備註 (如果有的話)\n"
"  -r --relocs            顯示重定位 (如果有的話)\n"
"  -u --unwind            顯示展開(unwind)資訊 (如果有的話)\n"
"  -d --dynamic           顯示動態區段 (如果有的話)\n"
"  -V --version-info      顯示版本區段 (如果有的話)\n"
"  -A --arch-specific     顯示系統架構特有的資訊 (如果有的話)\n"
"  -D --use-dynamic       顯示符號的時候使用動態區段資訊\n"
"  -x --hex-dump=<編號>   輸出 <編號> 區段的內容\n"
"  -w[liaprmfFsoR] 或\n"
"  --debug-dump[=line,=info,=abbrev,=pubnames,=aranges,=macro,=frames,=str,=loc,=Ranges]\n"
"                         顯示 DWARF2 除錯區段的內容\n"

#: readelf.c:2923
#, fuzzy, c-format
msgid ""
"  -i --instruction-dump=<number|name>\n"
"                         Disassemble the contents of section <number|name>\n"
msgstr ""
"  -i --instruction-dump=<編號>\n"
"                         反組譯區段 <編號> 的內容\n"

#: readelf.c:2927
#, fuzzy, c-format
msgid ""
"  -I --histogram         Display histogram of bucket list lengths\n"
"  -W --wide              Allow output width to exceed 80 characters\n"
"  @<file>                Read options from <file>\n"
"  -H --help              Display this information\n"
"  -v --version           Display the version number of readelf\n"
msgstr ""
"  -I --histogram         顯示存儲桶列表長度的長條圖\n"
"  -W --wide              允許輸出寬度超過 80 個字元\n"
"  -H --help              顯示本資訊\n"
"  -v --version           顯示 readelf 的版本號碼\n"

#: readelf.c:2956 readelf.c:2985 readelf.c:2989 readelf.c:11591
#, fuzzy
msgid "Out of memory allocating dump request table.\n"
msgstr "傾印需求表時記憶體定位不足。"

#: readelf.c:3144
#, c-format
msgid "Invalid option '-%c'\n"
msgstr "無效的選項「-%c」\n"

#: readelf.c:3158
msgid "Nothing to do.\n"
msgstr "無事可做。\n"

#: readelf.c:3170 readelf.c:3186 readelf.c:6536
msgid "none"
msgstr "無"

#: readelf.c:3187
msgid "2's complement, little endian"
msgstr "2 的補數，小尾序(little endian)"

#: readelf.c:3188
msgid "2's complement, big endian"
msgstr "2 的補數，大尾序(big endian)"

#: readelf.c:3206
msgid "Not an ELF file - it has the wrong magic bytes at the start\n"
msgstr "不是 ELF 檔案 - 它開頭的魔術位元組錯誤\n"

#: readelf.c:3216
#, c-format
msgid "ELF Header:\n"
msgstr "ELF 檔頭：\n"

#: readelf.c:3217
#, c-format
msgid "  Magic:   "
msgstr "魔術位元組："

#: readelf.c:3221
#, c-format
msgid "  Class:                             %s\n"
msgstr "  類別:                              %s\n"

#: readelf.c:3223
#, c-format
msgid "  Data:                              %s\n"
msgstr "  資料:                              %s\n"

#: readelf.c:3225
#, c-format
msgid "  Version:                           %d %s\n"
msgstr "  版本:                              %d %s\n"

#: readelf.c:3232
#, c-format
msgid "  OS/ABI:                            %s\n"
msgstr "  OS/ABI:                            %s\n"

#: readelf.c:3234
#, c-format
msgid "  ABI Version:                       %d\n"
msgstr "  ABI 版本:                          %d\n"

#: readelf.c:3236
#, c-format
msgid "  Type:                              %s\n"
msgstr "  類型:                              %s\n"

#: readelf.c:3238
#, c-format
msgid "  Machine:                           %s\n"
msgstr "  系統架構:                          %s\n"

#: readelf.c:3240
#, c-format
msgid "  Version:                           0x%lx\n"
msgstr "  版本:                              0x%lx\n"

#: readelf.c:3243
#, c-format
msgid "  Entry point address:               "
msgstr "  進入點位址：              "

#: readelf.c:3245
#, c-format
msgid ""
"\n"
"  Start of program headers:          "
msgstr ""
"\n"
"  程式標頭起點：            "

#: readelf.c:3247
#, c-format
msgid ""
" (bytes into file)\n"
"  Start of section headers:          "
msgstr ""
" (檔案內之位元組)\n"
"  區段標頭起點：                     "

#: readelf.c:3249
#, c-format
msgid " (bytes into file)\n"
msgstr " (檔案內之位元組)\n"

#: readelf.c:3251
#, c-format
msgid "  Flags:                             0x%lx%s\n"
msgstr "  旗標：             0x%lx%s\n"

#: readelf.c:3254
#, c-format
msgid "  Size of this header:               %ld (bytes)\n"
msgstr "  此標頭的大小：       %ld (位元組)\n"

#: readelf.c:3256
#, c-format
msgid "  Size of program headers:           %ld (bytes)\n"
msgstr "  程式標頭大小：       %ld (位元組)\n"

#: readelf.c:3258
#, c-format
msgid "  Number of program headers:         %ld\n"
msgstr "  程式標頭數量：       %ld\n"

#: readelf.c:3260
#, c-format
msgid "  Size of section headers:           %ld (bytes)\n"
msgstr "  區段標頭大小：         %ld (位元組)\n"

#: readelf.c:3262
#, c-format
msgid "  Number of section headers:         %ld"
msgstr "  區段標頭數量：         %ld"

#: readelf.c:3267
#, c-format
msgid "  Section header string table index: %ld"
msgstr "  字串表索引區段標頭： %ld"

#: readelf.c:3305 readelf.c:3339
msgid "program headers"
msgstr "程式標頭"

#: readelf.c:3378 readelf.c:3678 readelf.c:3721 readelf.c:3782 readelf.c:3849
#: readelf.c:4575 readelf.c:4599 readelf.c:5863 readelf.c:5909 readelf.c:6110
#: readelf.c:7186 readelf.c:7200 readelf.c:7711 readelf.c:7727 readelf.c:7770
#: readelf.c:7795 readelf.c:9780 readelf.c:9972 readelf.c:10507
#: readelf.c:10881 readelf.c:10895 readelf.c:11256
msgid "Out of memory\n"
msgstr "記憶體不足\n"

#: readelf.c:3405
#, c-format
msgid ""
"\n"
"There are no program headers in this file.\n"
msgstr ""
"\n"
"本檔案中沒有程式標頭。\n"

#: readelf.c:3411
#, c-format
msgid ""
"\n"
"Elf file type is %s\n"
msgstr ""
"\n"
"Elf 檔案類型為 %s\n"

#: readelf.c:3412
#, c-format
msgid "Entry point "
msgstr "進入點 "

#: readelf.c:3414
#, c-format
msgid ""
"\n"
"There are %d program headers, starting at offset "
msgstr ""
"\n"
"共有 %d 個程式標頭，開始於偏移量"

#: readelf.c:3426 readelf.c:3428
#, c-format
msgid ""
"\n"
"Program Headers:\n"
msgstr ""
"\n"
"程式標頭：\n"

#: readelf.c:3432
#, c-format
msgid "  Type           Offset   VirtAddr   PhysAddr   FileSiz MemSiz  Flg Align\n"
msgstr "  類型           偏移量   虛擬位址   實體位址 檔案大小 記憶大小 旗標 對齊\n"

#: readelf.c:3435
#, c-format
msgid "  Type           Offset   VirtAddr           PhysAddr           FileSiz  MemSiz   Flg Align\n"
msgstr "  類型           偏移量   虛擬位址           實體位址          檔案大小  記憶大小 旗標 對齊\n"

#: readelf.c:3439
#, c-format
msgid "  Type           Offset             VirtAddr           PhysAddr\n"
msgstr "  類型           偏移量             虛擬位址           實體位址\n"

#: readelf.c:3441
#, c-format
msgid "                 FileSiz            MemSiz              Flags  Align\n"
msgstr "                檔案大小          記憶大小              旗標   對齊\n"

#: readelf.c:3534
msgid "more than one dynamic segment\n"
msgstr "多於一個動態節區\n"

#: readelf.c:3550
#, fuzzy
msgid "no .dynamic section in the dynamic segment\n"
msgstr "在動態節區中沒有動態區段"

#: readelf.c:3565
#, fuzzy
msgid "the .dynamic section is not contained within the dynamic segment\n"
msgstr "在動態節區中未包含動態區段"

#: readelf.c:3568
#, fuzzy
msgid "the .dynamic section is not the first section in the dynamic segment.\n"
msgstr "動態節區中的第一區段並非動態區段"

#: readelf.c:3576
msgid "Unable to find program interpreter name\n"
msgstr "無法找到程式解譯器名稱\n"

#: readelf.c:3583
msgid "Internal error: failed to create format string to display program interpreter\n"
msgstr ""

#: readelf.c:3587
#, fuzzy
msgid "Unable to read program interpreter name\n"
msgstr "無法找到程式解譯器名稱\n"

#: readelf.c:3590
#, c-format
msgid ""
"\n"
"      [Requesting program interpreter: %s]"
msgstr ""
"\n"
"      [正在要求程式解譯器：%s]"

#: readelf.c:3602
#, c-format
msgid ""
"\n"
" Section to Segment mapping:\n"
msgstr ""
"\n"
" 區段到節區映射中:\n"

#: readelf.c:3603
#, c-format
msgid "  Segment Sections...\n"
msgstr "  節區段...\n"

#: readelf.c:3638
msgid "Cannot interpret virtual addresses without program headers.\n"
msgstr "無法不靠程式標頭而解譯虛擬位址\n"

#: readelf.c:3654
#, c-format
msgid "Virtual address 0x%lx not located in any PT_LOAD segment.\n"
msgstr "虛擬位址 0x%lx 不位於任何 PT_LOAD 節區中。\n"

#: readelf.c:3669 readelf.c:3712
msgid "section headers"
msgstr "區段標頭"

#: readelf.c:3757 readelf.c:3824
msgid "symbols"
msgstr "符號"

#: readelf.c:3769 readelf.c:3836
msgid "symtab shndx"
msgstr "符號分頁索引"

#: readelf.c:4112 readelf.c:4559
#, c-format
msgid ""
"\n"
"There are no sections in this file.\n"
msgstr ""
"\n"
"本檔案中沒有區段。\n"

#: readelf.c:4118
#, c-format
msgid "There are %d section headers, starting at offset 0x%lx:\n"
msgstr "共有 %d 個區段標頭，從偏移量 0x%lx 開始：\n"

#: readelf.c:4139 readelf.c:4676 readelf.c:4903 readelf.c:5203 readelf.c:5616
#: readelf.c:7521
msgid "string table"
msgstr "字串表"

#: readelf.c:4206
#, c-format
msgid "Section %d has invalid sh_entsize %lx (expected %lx)\n"
msgstr ""

#: readelf.c:4226
msgid "File contains multiple dynamic symbol tables\n"
msgstr "檔案含有多個動態符號表\n"

#: readelf.c:4239
msgid "File contains multiple dynamic string tables\n"
msgstr "檔案含有多個動態字串表\n"

#: readelf.c:4245
msgid "dynamic strings"
msgstr "動態字串"

#: readelf.c:4252
msgid "File contains multiple symtab shndx tables\n"
msgstr "檔案含有多個符號分頁索引表\n"

#: readelf.c:4303
#, c-format
msgid ""
"\n"
"Section Headers:\n"
msgstr ""
"\n"
"區段標頭：\n"

#: readelf.c:4305
#, c-format
msgid ""
"\n"
"Section Header:\n"
msgstr ""
"\n"
"區段標頭：\n"

#: readelf.c:4311 readelf.c:4322 readelf.c:4333
#, fuzzy, c-format
msgid "  [Nr] Name\n"
msgstr "   [索引]     名稱\n"

#: readelf.c:4312
#, fuzzy, c-format
msgid "       Type            Addr     Off    Size   ES   Lk Inf Al\n"
msgstr "  [號] 名稱              類型            位址     偏移   大小   全 旗標 連結 資  齊\n"

#: readelf.c:4316
#, c-format
msgid "  [Nr] Name              Type            Addr     Off    Size   ES Flg Lk Inf Al\n"
msgstr "  [號] 名稱              類型            位址     偏移   大小   全 旗標 連結 資  齊\n"

#: readelf.c:4323
#, fuzzy, c-format
msgid "       Type            Address          Off    Size   ES   Lk Inf Al\n"
msgstr "  [號] 名稱              類型            位址            偏移    大小   全 標  連 資  齊\n"

#: readelf.c:4327
#, c-format
msgid "  [Nr] Name              Type            Address          Off    Size   ES Flg Lk Inf Al\n"
msgstr "  [號] 名稱              類型            位址            偏移    大小   全 標  連 資  齊\n"

#: readelf.c:4334
#, fuzzy, c-format
msgid "       Type              Address          Offset            Link\n"
msgstr "  [號] 名稱              類型             位址              偏移量\n"

#: readelf.c:4335
#, fuzzy, c-format
msgid "       Size              EntSize          Info              Align\n"
msgstr "       大小              全體大小         旗標   連結  資訊  對齊\n"

#: readelf.c:4339
#, c-format
msgid "  [Nr] Name              Type             Address           Offset\n"
msgstr "  [號] 名稱              類型             位址              偏移量\n"

#: readelf.c:4340
#, c-format
msgid "       Size              EntSize          Flags  Link  Info  Align\n"
msgstr "       大小              全體大小         旗標   連結  資訊  對齊\n"

#: readelf.c:4345
#, fuzzy, c-format
msgid "       Flags\n"
msgstr "  旗標"

#: readelf.c:4420
#, c-format
msgid "section %u: sh_link value of %u is larger than the number of sections\n"
msgstr ""

#: readelf.c:4516
#, c-format
msgid ""
"Key to Flags:\n"
"  W (write), A (alloc), X (execute), M (merge), S (strings)\n"
"  I (info), L (link order), G (group), x (unknown)\n"
"  O (extra OS processing required) o (OS specific), p (processor specific)\n"
msgstr ""
"旗標關鍵字:\n"
"  W (寫入), A (定位), X (執行), M (融合), S (字串)\n"
"  I (資訊), L (連結順序), G (群組), x (未知)\n"
"  O (要求額外的作業系統處理) o (特定作業系統), p (特定處理器)\n"

#: readelf.c:4534
#, c-format
msgid "[<unknown>: 0x%x]"
msgstr "[<未知>: 0x%x]"

#: readelf.c:4566
msgid "Section headers are not available!\n"
msgstr "區段標頭無法取用！\n"

#: readelf.c:4590
#, c-format
msgid ""
"\n"
"There are no section groups in this file.\n"
msgstr ""
"\n"
"本檔案中沒有區段群組。\n"

#: readelf.c:4627
#, c-format
msgid "Bad sh_link in group section `%s'\n"
msgstr "在群組區段「%s」中不良的 sh_link\n"

#: readelf.c:4646
#, c-format
msgid "Bad sh_info in group section `%s'\n"
msgstr "在群組區段「%s」中不良的 sh_info\n"

#: readelf.c:4685
msgid "section data"
msgstr "區段資料"

#: readelf.c:4697
#, c-format
msgid "   [Index]    Name\n"
msgstr "   [索引]     名稱\n"

#: readelf.c:4711
#, fuzzy, c-format
msgid "section [%5u] in group section [%5u] > maximum section [%5u]\n"
msgstr "區段 [%5u] 已在群組區段 [%5u] 之中\n"

#: readelf.c:4720
#, fuzzy, c-format
msgid "section [%5u] in group section [%5u] already in group section [%5u]\n"
msgstr "區段 [%5u] 已在群組區段 [%5u] 之中\n"

#: readelf.c:4733
#, c-format
msgid "section 0 in group section [%5u]\n"
msgstr "區段 0 在群組區段 [%5u] 之中\n"

#: readelf.c:4828
#, c-format
msgid ""
"\n"
"'%s' relocation section at offset 0x%lx contains %ld bytes:\n"
msgstr ""
"\n"
"「%s」位於偏移量 0x%lx 的重定位區段含有 %ld 個位元組：\n"

#: readelf.c:4840
#, c-format
msgid ""
"\n"
"There are no dynamic relocations in this file.\n"
msgstr ""
"\n"
"本檔案中沒有動態重定位。\n"

#: readelf.c:4864
#, c-format
msgid ""
"\n"
"Relocation section "
msgstr ""
"\n"
"重定位區段 "

#: readelf.c:4869 readelf.c:5279 readelf.c:5294 readelf.c:5631
#, c-format
msgid "'%s'"
msgstr "「%s」"

#: readelf.c:4871 readelf.c:5296 readelf.c:5633
#, c-format
msgid " at offset 0x%lx contains %lu entries:\n"
msgstr " 位於偏移量 0x%lx 含有 %lu 個條目：\n"

#: readelf.c:4922
#, c-format
msgid ""
"\n"
"There are no relocations in this file.\n"
msgstr ""
"\n"
"該檔案中沒有重定位資訊。\n"

#: readelf.c:5107 readelf.c:5480
msgid "unwind table"
msgstr "展開表格"

#: readelf.c:5149 readelf.c:5562
#, c-format
msgid "Skipping unexpected relocation type %s\n"
msgstr "跳過意外的重定位類型 %s\n"

#: readelf.c:5211 readelf.c:5624 readelf.c:5677
#, c-format
msgid ""
"\n"
"There are no unwind sections in this file.\n"
msgstr ""
"\n"
"本檔案中沒有展開的區段。\n"

#: readelf.c:5274
#, c-format
msgid ""
"\n"
"Could not find unwind info section for "
msgstr ""
"\n"
"找不到展開的資訊區段之於"

#: readelf.c:5287
msgid "unwind info"
msgstr "展開的資訊"

#: readelf.c:5289 readelf.c:5630
#, c-format
msgid ""
"\n"
"Unwind section "
msgstr ""
"\n"
"展開的區段"

#: readelf.c:5843 readelf.c:5889
msgid "dynamic section"
msgstr "動態區段"

#: readelf.c:5967
#, c-format
msgid ""
"\n"
"There is no dynamic section in this file.\n"
msgstr ""
"\n"
"本檔案沒有動態區段。\n"

#: readelf.c:6005
#, fuzzy
msgid "Unable to seek to end of file!\n"
msgstr "無法搜索的檔案結尾！"

#: readelf.c:6018
msgid "Unable to determine the number of symbols to load\n"
msgstr "無法確定要讀入的符號數量\n"

#: readelf.c:6053
msgid "Unable to seek to end of file\n"
msgstr "無法搜索到檔案末尾\n"

#: readelf.c:6060
msgid "Unable to determine the length of the dynamic string table\n"
msgstr "無法確定動態字串表的長度\n"

#: readelf.c:6066
msgid "dynamic string table"
msgstr "動態字串表"

#: readelf.c:6103
msgid "symbol information"
msgstr "符號資訊"

#: readelf.c:6128
#, c-format
msgid ""
"\n"
"Dynamic section at offset 0x%lx contains %u entries:\n"
msgstr ""
"\n"
"位於偏移量 0x%lx 處的動態區段含有 %u 個條目：\n"

#: readelf.c:6131
#, c-format
msgid "  Tag        Type                         Name/Value\n"
msgstr "  標記        類型                         名稱/值\n"

#: readelf.c:6167
#, c-format
msgid "Auxiliary library"
msgstr "附加函式庫"

#: readelf.c:6171
#, c-format
msgid "Filter library"
msgstr "過濾器函式庫"

#: readelf.c:6175
#, c-format
msgid "Configuration file"
msgstr "配置檔案"

#: readelf.c:6179
#, c-format
msgid "Dependency audit library"
msgstr "依存審查函式庫"

#: readelf.c:6183
#, c-format
msgid "Audit library"
msgstr "審查函式庫"

#: readelf.c:6201 readelf.c:6229 readelf.c:6257
#, c-format
msgid "Flags:"
msgstr "旗標："

#: readelf.c:6204 readelf.c:6232 readelf.c:6259
#, c-format
msgid " None\n"
msgstr " 無\n"

#: readelf.c:6380
#, c-format
msgid "Shared library: [%s]"
msgstr "共享函式庫：[%s]"

#: readelf.c:6383
#, c-format
msgid " program interpreter"
msgstr " 程式解譯器"

#: readelf.c:6387
#, c-format
msgid "Library soname: [%s]"
msgstr "函式庫檔名：[%s]"

#: readelf.c:6391
#, c-format
msgid "Library rpath: [%s]"
msgstr "函式庫路徑：[%s]"

#: readelf.c:6395
#, c-format
msgid "Library runpath: [%s]"
msgstr "函式庫執行路徑：[%s]"

#: readelf.c:6458
#, c-format
msgid "Not needed object: [%s]\n"
msgstr "不需要的物件：[%s]\n"

#: readelf.c:6583
#, fuzzy, c-format
msgid ""
"\n"
"Version definition section '%s' contains %u entries:\n"
msgstr ""
"\n"
"版本定義區段「%s」含有 %ld 個條目：\n"

#: readelf.c:6586
#, c-format
msgid "  Addr: 0x"
msgstr "  位址：0x"

#: readelf.c:6588 readelf.c:6690 readelf.c:6813
#, fuzzy, c-format
msgid "  Offset: %#08lx  Link: %u (%s)\n"
msgstr "  偏移量：%#08lx  連結：%lx (%s)\n"

#: readelf.c:6596
msgid "version definition section"
msgstr "版本定義區段"

#: readelf.c:6625
#, c-format
msgid "  %#06x: Rev: %d  Flags: %s"
msgstr "  %#06x: 修訂: %d  旗標: %s"

#: readelf.c:6628
#, c-format
msgid "  Index: %d  Cnt: %d  "
msgstr "  索引: %d  計數: %d  "

#: readelf.c:6639
#, c-format
msgid "Name: %s\n"
msgstr "名稱：%s\n"

#: readelf.c:6641
#, c-format
msgid "Name index: %ld\n"
msgstr "名稱索引：%ld\n"

#: readelf.c:6658
#, c-format
msgid "  %#06x: Parent %d: %s\n"
msgstr "  %#06x: 前一版 %d: %s\n"

#: readelf.c:6661
#, c-format
msgid "  %#06x: Parent %d, name index: %ld\n"
msgstr "  %#06x: 前一版 %d, 名稱索引: %ld\n"

#: readelf.c:6665
#, fuzzy, c-format
msgid "  Version def aux past end of section\n"
msgstr "版本定義區段"

#: readelf.c:6670
#, fuzzy, c-format
msgid "  Version definition past end of section\n"
msgstr "版本定義區段"

#: readelf.c:6685
#, fuzzy, c-format
msgid ""
"\n"
"Version needs section '%s' contains %u entries:\n"
msgstr ""
"\n"
"版本需要區段「%s」含有 %ld 個條目：\n"

#: readelf.c:6688
#, c-format
msgid " Addr: 0x"
msgstr " 位址：0x"

#: readelf.c:6699
msgid "version need section"
msgstr "版本需要區段"

#: readelf.c:6724
#, c-format
msgid "  %#06x: Version: %d"
msgstr "  %#06x: 版本: %d"

#: readelf.c:6727
#, c-format
msgid "  File: %s"
msgstr "  檔案：%s"

#: readelf.c:6729
#, c-format
msgid "  File: %lx"
msgstr "  檔案：%lx"

#: readelf.c:6731
#, c-format
msgid "  Cnt: %d\n"
msgstr "  計數：%d\n"

#: readelf.c:6751
#, c-format
msgid "  %#06x:   Name: %s"
msgstr "  %#06x：名稱：%s"

#: readelf.c:6754
#, c-format
msgid "  %#06x:   Name index: %lx"
msgstr "  %#06x：名稱索引：%lx"

#: readelf.c:6757
#, c-format
msgid "  Flags: %s  Version: %d\n"
msgstr "  旗標：%s  版本：%d\n"

#: readelf.c:6764
#, fuzzy, c-format
msgid "  Version need aux past end of section\n"
msgstr "區段 %s 需要公開的 .debug_info 區段\n"

#: readelf.c:6769
#, fuzzy, c-format
msgid "  Version need past end of section\n"
msgstr "版本需要區段"

#: readelf.c:6804
msgid "version string table"
msgstr "版本字串表"

#: readelf.c:6808
#, c-format
msgid ""
"\n"
"Version symbols section '%s' contains %d entries:\n"
msgstr ""
"\n"
"版本符號區段「%s」含有 %d 個條目：\n"

#: readelf.c:6811
#, c-format
msgid " Addr: "
msgstr " 位址："

#: readelf.c:6822
msgid "version symbol data"
msgstr "版本符號資料"

#: readelf.c:6849
msgid "   0 (*local*)    "
msgstr "   0 (*本地*)    "

#: readelf.c:6853
msgid "   1 (*global*)   "
msgstr "   1 (*全域*)   "

#: readelf.c:6890 readelf.c:7588
msgid "version need"
msgstr "版本需要"

#: readelf.c:6900
msgid "version need aux (2)"
msgstr "版本需要外部 (2)"

#: readelf.c:6915 readelf.c:6970
#, fuzzy
msgid "*invalid*"
msgstr "無效的編號"

#: readelf.c:6945 readelf.c:7653
msgid "version def"
msgstr "版本定義"

#: readelf.c:6965 readelf.c:7668
msgid "version def aux"
msgstr "版本定義外部"

#: readelf.c:6999
#, c-format
msgid ""
"\n"
"No version information found in this file.\n"
msgstr ""
"\n"
"本檔案中沒有區段資訊。\n"

#: readelf.c:7133
#, c-format
msgid "<other>: %x"
msgstr ""

#: readelf.c:7192
msgid "Unable to read in dynamic data\n"
msgstr "無法讀入動態資料\n"

#: readelf.c:7283 readelf.c:7333 readelf.c:7357 readelf.c:7387 readelf.c:7411
#, fuzzy
msgid "Unable to seek to start of dynamic information\n"
msgstr "無法定位到動態資訊的起點"

#: readelf.c:7289 readelf.c:7339
msgid "Failed to read in number of buckets\n"
msgstr "讀入存儲桶數量失敗\n"

#: readelf.c:7295
msgid "Failed to read in number of chains\n"
msgstr "讀入鏈結數量失敗\n"

#: readelf.c:7395
#, fuzzy
msgid "Failed to determine last chain length\n"
msgstr "讀入鏈結數量失敗\n"

#: readelf.c:7439
#, c-format
msgid ""
"\n"
"Symbol table for image:\n"
msgstr ""
"\n"
"映像符號表：\n"

#: readelf.c:7441 readelf.c:7459
#, c-format
msgid "  Num Buc:    Value  Size   Type   Bind Vis      Ndx Name\n"
msgstr " 存儲桶號:    值     大小   類型   約束 版本     索引名稱\n"

#: readelf.c:7443 readelf.c:7461
#, c-format
msgid "  Num Buc:    Value          Size   Type   Bind Vis      Ndx Name\n"
msgstr " 存儲桶號:    值             大小   類型   約束 版本     索引名稱\n"

#: readelf.c:7457
#, fuzzy, c-format
msgid ""
"\n"
"Symbol table of `.gnu.hash' for image:\n"
msgstr ""
"\n"
"映像符號表：\n"

#: readelf.c:7496
#, c-format
msgid ""
"\n"
"Symbol table '%s' contains %lu entries:\n"
msgstr ""
"\n"
"符號表「%s」含有 %lu 個條目：\n"

#: readelf.c:7500
#, c-format
msgid "   Num:    Value  Size Type    Bind   Vis      Ndx Name\n"
msgstr "  編號:    值     大小 類型    約束   版本     索引名稱\n"

#: readelf.c:7502
#, c-format
msgid "   Num:    Value          Size Type    Bind   Vis      Ndx Name\n"
msgstr "  編號:    值             大小 類型    約束   版本     索引名稱\n"

#: readelf.c:7559
msgid "version data"
msgstr "版本資料"

#: readelf.c:7601
msgid "version need aux (3)"
msgstr "版本需要外部 (3)"

#: readelf.c:7628
#, fuzzy
msgid "bad dynamic symbol\n"
msgstr "不良的動態符號"

#: readelf.c:7692
#, c-format
msgid ""
"\n"
"Dynamic symbol information is not available for displaying symbols.\n"
msgstr ""
"\n"
"無法取得顯示符號所需之動態符號資訊。\n"

#: readelf.c:7704
#, c-format
msgid ""
"\n"
"Histogram for bucket list length (total of %lu buckets):\n"
msgstr ""
"\n"
"存儲桶列表長度的長條圖 (總計 %lu 存儲桶)：\n"

#: readelf.c:7706 readelf.c:7776
#, c-format
msgid " Length  Number     %% of total  Coverage\n"
msgstr " 長度    編號     總計之%%  覆蓋度\n"

#: readelf.c:7774
#, fuzzy, c-format
msgid ""
"\n"
"Histogram for `.gnu.hash' bucket list length (total of %lu buckets):\n"
msgstr ""
"\n"
"存儲桶列表長度的長條圖 (總計 %lu 存儲桶)：\n"

#: readelf.c:7840
#, c-format
msgid ""
"\n"
"Dynamic info segment at offset 0x%lx contains %d entries:\n"
msgstr ""
"\n"
"位於偏移量 0x%lx 的動態資訊節區含有 %d 個條目：\n"

#: readelf.c:7843
#, c-format
msgid " Num: Name                           BoundTo     Flags\n"
msgstr "編號: 名稱                           相約束      旗標\n"

#: readelf.c:7934
msgid "Unhandled MN10300 reloc type found after SYM_DIFF reloc"
msgstr ""

#: readelf.c:8082
#, c-format
msgid "Missing knowledge of 32-bit reloc types used in DWARF sections of machine number %d\n"
msgstr ""

#: readelf.c:8375
#, c-format
msgid "unable to apply unsupported reloc type %d to section %s\n"
msgstr ""

#: readelf.c:8383
#, fuzzy, c-format
msgid "skipping invalid relocation offset 0x%lx in section %s\n"
msgstr "在區段 .rela.%2$s 中跳過意外的重定位符號類型 %1$s\n"

#: readelf.c:8407
#, fuzzy, c-format
msgid "skipping unexpected symbol type %s in %ld'th relocation in section %s\n"
msgstr "在區段 .rela.%2$s 中跳過意外的重定位符號類型 %1$s\n"

#: readelf.c:8449
#, c-format
msgid ""
"\n"
"Assembly dump of section %s\n"
msgstr ""
"\n"
"「%s」區段的組合語言傾印：\n"

#: readelf.c:8470
#, c-format
msgid ""
"\n"
"Section '%s' has no data to dump.\n"
msgstr ""
"\n"
"「%s」區段沒有可傾印的資料。\n"

#: readelf.c:8476
#, fuzzy
msgid "section contents"
msgstr "設定 .nlmsection 內容"

#: readelf.c:8496
#, fuzzy, c-format
msgid ""
"\n"
"String dump of section '%s':\n"
msgstr ""
"\n"
"「%s」區段的十六進位傾印：\n"

#: readelf.c:8514
#, c-format
msgid "  Note: This section has relocations against it, but these have NOT been applied to this dump.\n"
msgstr ""

#: readelf.c:8543
#, fuzzy, c-format
msgid "  No strings found in this section."
msgstr ""
"\n"
"本檔案中沒有區段資訊。\n"

#: readelf.c:8565
#, c-format
msgid ""
"\n"
"Hex dump of section '%s':\n"
msgstr ""
"\n"
"「%s」區段的十六進位傾印：\n"

#: readelf.c:8589
#, c-format
msgid " NOTE: This section has relocations against it, but these have NOT been applied to this dump.\n"
msgstr ""

#: readelf.c:8727
#, fuzzy, c-format
msgid "%s section data"
msgstr "區段資料"

#: readelf.c:8793
#, c-format
msgid ""
"\n"
"Section '%s' has no debugging data.\n"
msgstr ""
"\n"
"「%s」區段沒有正在除錯的資料。\n"

#. There is no point in dumping the contents of a debugging section
#. which has the NOBITS type - the bits in the file will be random.
#. This can happen when a file containing a .eh_frame section is
#. stripped with the --only-keep-debug command line option.
#: readelf.c:8802
#, c-format
msgid "section '%s' has the NOBITS type - its contents are unreliable.\n"
msgstr ""

#: readelf.c:8838
#, c-format
msgid "Unrecognized debug section: %s\n"
msgstr "無法識別的除錯區段：%s\n"

#: readelf.c:8866
#, fuzzy, c-format
msgid "Section '%s' was not dumped because it does not exist!\n"
msgstr "沒有傾印區段 %d 是因為它們並不存在！\n"

#: readelf.c:8907
#, c-format
msgid "Section %d was not dumped because it does not exist!\n"
msgstr "沒有傾印區段 %d 是因為它們並不存在！\n"

#: readelf.c:9421
msgid "attributes"
msgstr ""

#: readelf.c:9442
#, c-format
msgid "ERROR: Bad section length (%d > %d)\n"
msgstr ""

#: readelf.c:9473
#, c-format
msgid "ERROR: Bad subsection length (%d > %d)\n"
msgstr ""

#: readelf.c:9532
#, fuzzy, c-format
msgid "Unknown format '%c'\n"
msgstr "未知的格式類型「%s」"

#: readelf.c:9686 readelf.c:10208
msgid "liblist"
msgstr "函式庫清單"

#: readelf.c:9773
msgid "options"
msgstr "選項"

#: readelf.c:9804
#, c-format
msgid ""
"\n"
"Section '%s' contains %d entries:\n"
msgstr ""
"\n"
"「%s」區段含有 %d 個條目：\n"

#: readelf.c:9965
#, fuzzy
msgid "conflict list found without a dynamic symbol table\n"
msgstr "不具動態符號表卻發現衝突的表列"

#: readelf.c:9982 readelf.c:9997
msgid "conflict"
msgstr "衝突"

#: readelf.c:10007
#, c-format
msgid ""
"\n"
"Section '.conflict' contains %lu entries:\n"
msgstr ""
"\n"
"「.conflict」區段含有 %lu 個條目：\n"

#: readelf.c:10009
msgid "  Num:    Index       Value  Name"
msgstr " 編號:    索引        值     名稱"

#: readelf.c:10042
msgid "GOT"
msgstr ""

#: readelf.c:10043
#, c-format
msgid ""
"\n"
"Primary GOT:\n"
msgstr ""

#: readelf.c:10044
#, c-format
msgid " Canonical gp value: "
msgstr ""

#: readelf.c:10048 readelf.c:10140
#, c-format
msgid " Reserved entries:\n"
msgstr ""

#: readelf.c:10049
#, c-format
msgid "  %*s %10s %*s Purpose\n"
msgstr ""

#: readelf.c:10065
#, c-format
msgid " Local entries:\n"
msgstr ""

#: readelf.c:10066
#, fuzzy, c-format
msgid "  %*s %10s %*s\n"
msgstr "    %-18s %s\n"

#: readelf.c:10081
#, c-format
msgid " Global entries:\n"
msgstr ""

#: readelf.c:10082
#, c-format
msgid "  %*s %10s %*s %*s %-7s %3s %s\n"
msgstr ""

#: readelf.c:10138
msgid "PLT GOT"
msgstr ""

#: readelf.c:10139
#, c-format
msgid ""
"\n"
"PLT GOT:\n"
"\n"
msgstr ""

#: readelf.c:10141
#, c-format
msgid "  %*s %*s Purpose\n"
msgstr ""

#: readelf.c:10149
#, c-format
msgid " Entries:\n"
msgstr ""

#: readelf.c:10150
#, c-format
msgid "  %*s %*s %*s %-7s %3s %s\n"
msgstr ""

#: readelf.c:10216
msgid "liblist string table"
msgstr "函式庫字串表"

#: readelf.c:10226
#, c-format
msgid ""
"\n"
"Library list section '%s' contains %lu entries:\n"
msgstr ""
"\n"
"「%s」函式庫列表區段含有 %lu 個條目：\n"

#: readelf.c:10279
msgid "NT_AUXV (auxiliary vector)"
msgstr "NT_AUXV (auxiliary 向量)"

#: readelf.c:10281
msgid "NT_PRSTATUS (prstatus structure)"
msgstr "NT_PRSTATUS (prstatus 結構)"

#: readelf.c:10283
msgid "NT_FPREGSET (floating point registers)"
msgstr "NT_FPREGSET (浮點暫存器)"

#: readelf.c:10285
msgid "NT_PRPSINFO (prpsinfo structure)"
msgstr "NT_PRPSINFO (prpsinfo 結構)"

#: readelf.c:10287
msgid "NT_TASKSTRUCT (task structure)"
msgstr "NT_TASKSTRUCT (任務結構)"

#: readelf.c:10289
msgid "NT_PRXFPREG (user_xfpregs structure)"
msgstr "NT_PRXFPREG (user_xfpregs 結構)"

#: readelf.c:10291
msgid "NT_PPC_VMX (ppc Altivec registers)"
msgstr ""

#: readelf.c:10293
msgid "NT_PPC_VSX (ppc VSX registers)"
msgstr ""

#: readelf.c:10295
msgid "NT_PSTATUS (pstatus structure)"
msgstr "NT_PSTATUS (pstatus 結構)"

#: readelf.c:10297
msgid "NT_FPREGS (floating point registers)"
msgstr "NT_FPREGS (浮點暫存器)"

#: readelf.c:10299
msgid "NT_PSINFO (psinfo structure)"
msgstr "NT_PSINFO (psinfo 結構)"

#: readelf.c:10301
msgid "NT_LWPSTATUS (lwpstatus_t structure)"
msgstr "NT_LWPSTATUS (lwpstatus_t 結構)"

#: readelf.c:10303
msgid "NT_LWPSINFO (lwpsinfo_t structure)"
msgstr "NT_LWPSINFO (lwpsinfo_t 結構)"

#: readelf.c:10305
msgid "NT_WIN32PSTATUS (win32_pstatus structure)"
msgstr "NT_WIN32PSTATUS (win32_pstatus 結構)"

#: readelf.c:10313
msgid "NT_VERSION (version)"
msgstr "NT_VERSION (版本)"

#: readelf.c:10315
msgid "NT_ARCH (architecture)"
msgstr "NT_ARCH (系統架構)"

#: readelf.c:10320 readelf.c:10343 readelf.c:10365
#, c-format
msgid "Unknown note type: (0x%08x)"
msgstr "未知的備註類型：(0x%08x)"

#: readelf.c:10332
msgid "NT_GNU_ABI_TAG (ABI version tag)"
msgstr ""

#: readelf.c:10334
msgid "NT_GNU_HWCAP (DSO-supplied software HWCAP info)"
msgstr ""

#: readelf.c:10336
msgid "NT_GNU_BUILD_ID (unique build ID bitstring)"
msgstr ""

#: readelf.c:10338
#, fuzzy
msgid "NT_GNU_GOLD_VERSION (gold version)"
msgstr "NT_VERSION (版本)"

#. NetBSD core "procinfo" structure.
#: readelf.c:10355
msgid "NetBSD procinfo structure"
msgstr "NetBSD procinfo 結構"

#: readelf.c:10382 readelf.c:10396
msgid "PT_GETREGS (reg structure)"
msgstr "PT_GETREGS (reg 結構)"

#: readelf.c:10384 readelf.c:10398
msgid "PT_GETFPREGS (fpreg structure)"
msgstr "PT_GETFPREGS (fpreg 結構)"

#: readelf.c:10404
#, c-format
msgid "PT_FIRSTMACH+%d"
msgstr "PT_FIRSTMACH+%d"

#: readelf.c:10461
msgid "notes"
msgstr "備註"

#: readelf.c:10467
#, c-format
msgid ""
"\n"
"Notes at offset 0x%08lx with length 0x%08lx:\n"
msgstr ""
"\n"
"備註位於偏移量 0x%08lx 長度為 0x%08lx：\n"

#: readelf.c:10469
#, c-format
msgid "  Owner\t\tData size\tDescription\n"
msgstr "  所有者\t\t資料大小\t描述\n"

#: readelf.c:10488
#, fuzzy, c-format
msgid "corrupt note found at offset %lx into core notes\n"
msgstr "核心備註中位於偏移量 %x 處發現損毀的備註\n"

#: readelf.c:10490
#, fuzzy, c-format
msgid " type: %lx, namesize: %08lx, descsize: %08lx\n"
msgstr " 類型：%x，名稱大小：%08lx，描述大小：%08lx\n"

#: readelf.c:10588
#, c-format
msgid "No note segments present in the core file.\n"
msgstr "核心檔案中沒有備註節區。\n"

#: readelf.c:10672
msgid ""
"This instance of readelf has been built without support for a\n"
"64 bit data type and so it cannot read 64 bit ELF files.\n"
msgstr ""
"本 readelf 實例於編譯時未加入 64 位元資料類型支援，\n"
"因而無法讀入 64 位元 ELF 檔案。\n"

#: readelf.c:10719
#, c-format
msgid "%s: Failed to read file header\n"
msgstr "%s：讀入檔案頭標失敗\n"

#: readelf.c:10732
#, c-format
msgid ""
"\n"
"File: %s\n"
msgstr ""
"\n"
"檔案：%s\n"

#: readelf.c:10947
#, fuzzy, c-format
msgid "%s: failed to seek to first archive header\n"
msgstr "%s：搜索至下一個保存檔標頭失敗\n"

#: readelf.c:10956 readelf.c:11223 readelf.c:11393
#, c-format
msgid "%s: failed to read archive header\n"
msgstr "%s：讀入保存檔標頭失敗\n"

#: readelf.c:10981
#, fuzzy, c-format
msgid "%s: the archive index is empty\n"
msgstr "%s：不良的保存檔案名稱\n"

#: readelf.c:10989 readelf.c:11013
#, fuzzy, c-format
msgid "%s: failed to read archive index\n"
msgstr "%s：讀入保存檔標頭失敗\n"

#: readelf.c:10998
#, c-format
msgid "%s: the archive index is supposed to have %ld entries, but the size in the header is too small\n"
msgstr ""

#: readelf.c:11006
msgid "Out of memory whilst trying to read archive symbol index\n"
msgstr ""

#: readelf.c:11024
msgid "Out of memory whilst trying to convert the archive symbol index\n"
msgstr ""

#: readelf.c:11036
#, c-format
msgid "%s: the archive has an index but no symbols\n"
msgstr ""

#: readelf.c:11043
msgid "Out of memory whilst trying to read archive index symbol table\n"
msgstr ""

#: readelf.c:11049
#, fuzzy, c-format
msgid "%s: failed to read archive index symbol table\n"
msgstr "%s：跳過保存檔符號表失敗\n"

#: readelf.c:11057
#, c-format
msgid "%s: failed to skip archive symbol table\n"
msgstr "%s：跳過保存檔符號表失敗\n"

#: readelf.c:11068
#, fuzzy, c-format
msgid "%s: failed to read archive header following archive index\n"
msgstr "%s：讀入保存檔標頭失敗\n"

#: readelf.c:11073
#, fuzzy, c-format
msgid "%s has no archive index\n"
msgstr "%s：不良的保存檔案名稱\n"

#: readelf.c:11084
msgid "Out of memory reading long symbol names in archive\n"
msgstr ""

#: readelf.c:11092
#, fuzzy, c-format
msgid "%s: failed to read long symbol name string table\n"
msgstr "%s：讀入字串表失敗\n"

#: readelf.c:11217
#, fuzzy, c-format
msgid "%s: failed to seek to next file name\n"
msgstr "%s：搜索至下一個保存檔標頭失敗\n"

#: readelf.c:11228 readelf.c:11399
#, fuzzy, c-format
msgid "%s: did not find a valid archive header\n"
msgstr "%s 不是有效的保存檔"

#: readelf.c:11309
#, c-format
msgid "%s: unable to dump the index as none was found\n"
msgstr ""

#: readelf.c:11315
#, c-format
msgid "Index of archive %s: (%ld entries, 0x%lx bytes in the symbol table)\n"
msgstr ""

#: readelf.c:11333
#, fuzzy, c-format
msgid "Binary %s contains:\n"
msgstr "%s 區段含有：\n"

#: readelf.c:11341
#, c-format
msgid "%s: end of the symbol table reached before the end of the index\n"
msgstr ""

#: readelf.c:11352
#, c-format
msgid "%s: symbols remain in the index symbol table, but without corresponding entries in the index table\n"
msgstr ""

#: readelf.c:11357
#, fuzzy, c-format
msgid "%s: failed to seek back to start of object files in the archive\n"
msgstr "%s：搜索至下一個保存檔標頭失敗\n"

#: readelf.c:11385
#, c-format
msgid "%s: failed to seek to next archive header\n"
msgstr "%s：搜索至下一個保存檔標頭失敗\n"

#: readelf.c:11413 readelf.c:11422
#, c-format
msgid "%s: bad archive file name\n"
msgstr "%s：不良的保存檔案名稱\n"

#: readelf.c:11441 readelf.c:11517
#, c-format
msgid "Input file '%s' is not readable.\n"
msgstr "輸入檔案「%s」並不可讀。\n"

#: readelf.c:11463
#, fuzzy, c-format
msgid "%s: failed to seek to archive member.\n"
msgstr "%s：搜索至下一個保存檔標頭失敗\n"

#: readelf.c:11501
#, c-format
msgid "'%s': No such file\n"
msgstr "「%s」：找不到此檔案\n"

#: readelf.c:11503
#, c-format
msgid "Could not locate '%s'.  System error message: %s\n"
msgstr "無法找到「%s」的位置。錯誤訊息為：%s\n"

#: readelf.c:11510
#, c-format
msgid "'%s' is not an ordinary file\n"
msgstr "「%s」不是一般的檔案\n"

#: readelf.c:11523
#, fuzzy, c-format
msgid "%s: Failed to read file's magic number\n"
msgstr "%s：讀入檔案頭標失敗\n"

#: readelf.c:11535
#, c-format
msgid "File %s is not an archive so its index cannot be displayed.\n"
msgstr ""

#: rename.c:124
#, c-format
msgid "%s: cannot set time: %s"
msgstr "%s：無法設置時間：%s"

#. We have to clean up here.
#: rename.c:159 rename.c:197
#, fuzzy, c-format
msgid "unable to rename '%s'; reason: %s"
msgstr "無法更改「%s」的名稱，原因：%s"

#: rename.c:205
#, fuzzy, c-format
msgid "unable to copy file '%s'; reason: %s"
msgstr "無法複製檔案「%s」，原因：%s"

#: resbin.c:120
#, c-format
msgid "%s: not enough binary data"
msgstr "%s：不足的二進位資料"

#: resbin.c:136
msgid "null terminated unicode string"
msgstr "以 null 結束的 unicode 字串"

#: resbin.c:163 resbin.c:169
msgid "resource ID"
msgstr "資源 ID"

#: resbin.c:208
msgid "cursor"
msgstr "游標"

#: resbin.c:239 resbin.c:246
msgid "menu header"
msgstr "選單標頭"

#: resbin.c:255
msgid "menuex header"
msgstr "擴展選單標頭"

#: resbin.c:259
msgid "menuex offset"
msgstr "擴展選單偏移量"

#: resbin.c:264
#, c-format
msgid "unsupported menu version %d"
msgstr "不支援的選單版本 %d"

#: resbin.c:289 resbin.c:304 resbin.c:366
msgid "menuitem header"
msgstr "選單細項標頭"

#: resbin.c:396
msgid "menuitem"
msgstr "選單細項"

#: resbin.c:433 resbin.c:461
msgid "dialog header"
msgstr "對話框標頭"

#: resbin.c:451
#, c-format
msgid "unexpected DIALOGEX version %d"
msgstr "意外的 DIALOGEX 版本 %d"

#: resbin.c:496
msgid "dialog font point size"
msgstr "對話框字型點數大小"

#: resbin.c:504
msgid "dialogex font information"
msgstr "對話框擴展字型資訊"

#: resbin.c:530 resbin.c:548
msgid "dialog control"
msgstr "對話框控制"

#: resbin.c:540
msgid "dialogex control"
msgstr "對話框擴展控制"

#: resbin.c:569
msgid "dialog control end"
msgstr "對話框控制結束"

#: resbin.c:581
msgid "dialog control data"
msgstr "對話框控制資料"

#: resbin.c:621
msgid "stringtable string length"
msgstr "字串表字串長度"

#: resbin.c:631
msgid "stringtable string"
msgstr "字串表字串"

#: resbin.c:661
msgid "fontdir header"
msgstr "字型目錄標頭"

#: resbin.c:675
msgid "fontdir"
msgstr "字型目錄"

#: resbin.c:692
msgid "fontdir device name"
msgstr "字型目錄設備名稱"

#: resbin.c:698
msgid "fontdir face name"
msgstr "字型目錄字面名稱"

#: resbin.c:738
msgid "accelerator"
msgstr "加速鍵"

#: resbin.c:797
msgid "group cursor header"
msgstr "群組游標標頭"

#: resbin.c:801 resrc.c:1355
#, c-format
msgid "unexpected group cursor type %d"
msgstr "意外的群組游標類型 %d"

#: resbin.c:816
msgid "group cursor"
msgstr "群組游標"

#: resbin.c:852
msgid "group icon header"
msgstr "群組圖示標頭"

#: resbin.c:856 resrc.c:1302
#, c-format
msgid "unexpected group icon type %d"
msgstr "意外的群組圖示類型 %d"

#: resbin.c:871
msgid "group icon"
msgstr "群組圖示"

#: resbin.c:935 resbin.c:1151
msgid "unexpected version string"
msgstr "意外的版本字串"

#: resbin.c:966
#, c-format
msgid "version length %d does not match resource length %lu"
msgstr "版本長度 %d 不符合資源長度 %lu"

#: resbin.c:970
#, c-format
msgid "unexpected version type %d"
msgstr "意外的版本類型 %d"

#: resbin.c:982
#, fuzzy, c-format
msgid "unexpected fixed version information length %ld"
msgstr "意外的固定版本資訊長度 %d"

#: resbin.c:985
msgid "fixed version info"
msgstr "固定版本資訊"

#: resbin.c:989
#, c-format
msgid "unexpected fixed version signature %lu"
msgstr "意外的固定版本簽名 %lu"

#: resbin.c:993
#, c-format
msgid "unexpected fixed version info version %lu"
msgstr "意外的固定版本資訊版本 %lu"

#: resbin.c:1022
msgid "version var info"
msgstr "版本變動資訊"

#: resbin.c:1039
#, fuzzy, c-format
msgid "unexpected stringfileinfo value length %ld"
msgstr "意外的字串檔資訊值長度 %d"

#: resbin.c:1049
#, fuzzy, c-format
msgid "unexpected version stringtable value length %ld"
msgstr "意外的版本字串表格值長度 %d"

#: resbin.c:1083
#, fuzzy, c-format
msgid "unexpected version string length %ld != %ld + %ld"
msgstr "意外的版本字串長度 %d != %d + %d"

#: resbin.c:1094
#, fuzzy, c-format
msgid "unexpected version string length %ld < %ld"
msgstr "意外的版本字串長度 %d < %d"

#: resbin.c:1111
#, fuzzy, c-format
msgid "unexpected varfileinfo value length %ld"
msgstr "意外的變動檔資訊值長度 %d"

#: resbin.c:1130
msgid "version varfileinfo"
msgstr "版本變動檔資訊"

#: resbin.c:1145
#, fuzzy, c-format
msgid "unexpected version value length %ld"
msgstr "意外的版本值長度 %d"

#: rescoff.c:124
msgid "filename required for COFF input"
msgstr "COFF 輸入需要檔名"

#: rescoff.c:141
#, c-format
msgid "%s: no resource section"
msgstr "%s：沒有資源區段"

#: rescoff.c:173
#, c-format
msgid "%s: %s: address out of bounds"
msgstr "%s：%s：位址超出界限"

#: rescoff.c:190
msgid "directory"
msgstr "目錄"

#: rescoff.c:218
msgid "named directory entry"
msgstr "已命名的目錄條目"

#: rescoff.c:227
msgid "directory entry name"
msgstr "目錄條目名稱"

#: rescoff.c:247
msgid "named subdirectory"
msgstr "已命名的子目錄"

#: rescoff.c:255
msgid "named resource"
msgstr "已命名的資源"

#: rescoff.c:270
msgid "ID directory entry"
msgstr "ID 目錄項目"

#: rescoff.c:287
msgid "ID subdirectory"
msgstr "ID 子目錄"

#: rescoff.c:295
msgid "ID resource"
msgstr "ID 資源"

#: rescoff.c:320
msgid "resource type unknown"
msgstr "資源類型未知"

#: rescoff.c:323
msgid "data entry"
msgstr "資料條目"

#: rescoff.c:331
msgid "resource data"
msgstr "資源資料"

#: rescoff.c:336
msgid "resource data size"
msgstr "資源資料大小"

#: rescoff.c:431
msgid "filename required for COFF output"
msgstr "COFF 輸出需要檔名"

#: rescoff.c:715
msgid "can't get BFD_RELOC_RVA relocation type"
msgstr "無法得到 BFD_RELOC_RVA 重定向類型"

#: resrc.c:262 resrc.c:333
#, c-format
msgid "can't open temporary file `%s': %s"
msgstr "無法開啟臨時檔案「%s」：%s"

#: resrc.c:268
#, c-format
msgid "can't redirect stdout: `%s': %s"
msgstr "無法重定向標準輸出：「%s」：%s"

#: resrc.c:284
#, c-format
msgid "%s %s: %s"
msgstr "%s %s：%s"

#: resrc.c:329
#, c-format
msgid "can't execute `%s': %s"
msgstr "無法執行「%s」：%s"

#: resrc.c:338
#, c-format
msgid "Using temporary file `%s' to read preprocessor output\n"
msgstr "使用臨時檔案「%s」以讀入前置處理器輸出\n"

#: resrc.c:345
#, c-format
msgid "can't popen `%s': %s"
msgstr "無法 popen「%s」：%s"

#: resrc.c:347
#, c-format
msgid "Using popen to read preprocessor output\n"
msgstr "使用 popen 讀入前置處理器輸出\n"

#: resrc.c:413
#, c-format
msgid "Tried `%s'\n"
msgstr "已嘗試「%s」\n"

#: resrc.c:424
#, c-format
msgid "Using `%s'\n"
msgstr "正使用「%s」\n"

#: resrc.c:608
#, fuzzy
msgid "preprocessing failed."
msgstr "處理 def 檔案：%s"

#: resrc.c:631
#, c-format
msgid "%s:%d: %s\n"
msgstr "%s：%d：%s\n"

#: resrc.c:639
#, c-format
msgid "%s: unexpected EOF"
msgstr "%s：檔案意外結尾"

#: resrc.c:688
#, c-format
msgid "%s: read of %lu returned %lu"
msgstr "%s：讀取 %lu 返回 %lu"

#: resrc.c:727 resrc.c:1502
#, c-format
msgid "stat failed on bitmap file `%s': %s"
msgstr "對位元圖檔案「%s」進行 stat 操作失敗：%s"

#: resrc.c:778
#, c-format
msgid "cursor file `%s' does not contain cursor data"
msgstr "游標檔案「%s」不含有游標資料"

#: resrc.c:810 resrc.c:1210
#, c-format
msgid "%s: fseek to %lu failed: %s"
msgstr "%s: fseek 到 %lu 操作失敗: %s"

#: resrc.c:936
msgid "help ID requires DIALOGEX"
msgstr "輔助 ID 要求 DIALOGEX"

#: resrc.c:938
msgid "control data requires DIALOGEX"
msgstr "控制資料要求 DIALOGEX"

#: resrc.c:966
#, c-format
msgid "stat failed on font file `%s': %s"
msgstr "對字型檔案「%s」進行 stat 操作失敗：%s"

#: resrc.c:1179
#, c-format
msgid "icon file `%s' does not contain icon data"
msgstr "圖示檔案「%s」不含有圖示資料"

#: resrc.c:1724 resrc.c:1759
#, c-format
msgid "stat failed on file `%s': %s"
msgstr "對檔案「%s」進行 stat 操作失敗：%s"

#: resrc.c:1940
#, c-format
msgid "can't open `%s' for output: %s"
msgstr "無法為輸出而開啟「%s」：%s"

#: size.c:79
#, c-format
msgid " Displays the sizes of sections inside binary files\n"
msgstr " 顯示二進位檔案中區段的大小\n"

#: size.c:80
#, c-format
msgid " If no input file(s) are specified, a.out is assumed\n"
msgstr " 如果沒有指定輸入檔案，預設為 a.out\n"

#: size.c:81
#, fuzzy, c-format
msgid ""
" The options are:\n"
"  -A|-B     --format={sysv|berkeley}  Select output style (default is %s)\n"
"  -o|-d|-x  --radix={8|10|16}         Display numbers in octal, decimal or hex\n"
"  -t        --totals                  Display the total sizes (Berkeley only)\n"
"            --common                  Display total size for *COM* syms\n"
"            --target=<bfdname>        Set the binary file format\n"
"            @<file>                   Read options from <file>\n"
"  -h        --help                    Display this information\n"
"  -v        --version                 Display the program's version\n"
"\n"
msgstr ""
" 選項為：\n"
"  -A|-B     --format={sysv|berkeley}  選擇輸出風格 (預設為 %s)\n"
"  -o|-d|-x  --radix={8|10|16}         以八進位、十進位或十六進位顯示數值\n"
"  -t        --totals                  顯示總計大小 (只用於 Berkeley 風格)\n"
"            --target=<bfdname>        設定二進位檔案格式\n"
"  -h        --help                    顯示本資訊\n"
"  -v        --version                 顯示程式的版本號碼\n"
"\n"

#: size.c:160
#, c-format
msgid "invalid argument to --format: %s"
msgstr "--format 的無效引數：%s"

#: size.c:187
#, c-format
msgid "Invalid radix: %s\n"
msgstr "無效的 radix: %s\n"

#: srconv.c:1731
#, c-format
msgid "Convert a COFF object file into a SYSROFF object file\n"
msgstr "將 COFF 目標檔案轉換為 SYSROFF 目標檔案\n"

#: srconv.c:1732
#, fuzzy, c-format
msgid ""
" The options are:\n"
"  -q --quick       (Obsolete - ignored)\n"
"  -n --noprescan   Do not perform a scan to convert commons into defs\n"
"  -d --debug       Display information about what is being done\n"
"  @<file>          Read options from <file>\n"
"  -h --help        Display this information\n"
"  -v --version     Print the program's version number\n"
msgstr ""
" 選項為：\n"
"  -q --quick       (過期 - 忽略)\n"
"  -n --noprescan   不執行掃瞄以將 commons 轉換為 defs\n"
"  -d --debug       顯示關於已完成事件的資訊\n"
"  -h --help        顯示本資訊\n"
"  -v --version     列印程式的版本號碼\n"

#: srconv.c:1878
#, c-format
msgid "unable to open output file %s"
msgstr "無法打開輸出檔案 %s"

#: stabs.c:328 stabs.c:1726
msgid "numeric overflow"
msgstr "數值溢出"

#: stabs.c:338
#, c-format
msgid "Bad stab: %s\n"
msgstr "不良 stab: %s\n"

#: stabs.c:346
#, c-format
msgid "Warning: %s: %s\n"
msgstr "警告：%s：%s\n"

#: stabs.c:456
#, c-format
msgid "N_LBRAC not within function\n"
msgstr "N_LBRAC 不在函數中\n"

#: stabs.c:495
#, c-format
msgid "Too many N_RBRACs\n"
msgstr "過多的 N_RBRAC\n"

#: stabs.c:736
msgid "unknown C++ encoded name"
msgstr "未知的 C++ 編碼名稱"

#. Complain and keep going, so compilers can invent new
#. cross-reference types.
#: stabs.c:1271
msgid "unrecognized cross reference type"
msgstr "無法識別的交叉參考類型"

#. Does this actually ever happen?  Is that why we are worrying
#. about dealing with it rather than just calling error_type?
#: stabs.c:1818
msgid "missing index type"
msgstr "遺漏的索引類型"

#: stabs.c:2134
msgid "unknown virtual character for baseclass"
msgstr "不明之做為基本類別的虚擬字元"

#: stabs.c:2152
msgid "unknown visibility character for baseclass"
msgstr "不明之做為基本類別的可見字元"

#: stabs.c:2338
msgid "unnamed $vb type"
msgstr "未命名的 $vb 類型"

#: stabs.c:2344
msgid "unrecognized C++ abbreviation"
msgstr "無法識別的 C++ 縮寫"

#: stabs.c:2420
msgid "unknown visibility character for field"
msgstr "欄位中未知的可見字元"

#: stabs.c:2672
msgid "const/volatile indicator missing"
msgstr "遺漏 const/volatile 指示符號"

#: stabs.c:2908
#, c-format
msgid "No mangling for \"%s\"\n"
msgstr "\"%s\" 沒有損壞\n"

#: stabs.c:3208
msgid "Undefined N_EXCL"
msgstr "未定義 N_EXCL"

#: stabs.c:3288
#, c-format
msgid "Type file number %d out of range\n"
msgstr "類型檔案編號 %d 超出範圍\n"

#: stabs.c:3293
#, c-format
msgid "Type index number %d out of range\n"
msgstr "類型索引編號 %d 超出範圍\n"

#: stabs.c:3372
#, c-format
msgid "Unrecognized XCOFF type %d\n"
msgstr "無法識別的 XCOFF 類型 %d\n"

#: stabs.c:3664
#, c-format
msgid "bad mangled name `%s'\n"
msgstr "不良的損毀名稱「%s」\n"

#: stabs.c:3759
#, c-format
msgid "no argument types in mangled string\n"
msgstr "已損毀字串中沒有引數類型\n"

#: stabs.c:5113
#, c-format
msgid "Demangled name is not a function\n"
msgstr "損毀後修復的名稱不是函數\n"

#: stabs.c:5155
#, c-format
msgid "Unexpected type in v3 arglist demangling\n"
msgstr "在 v3 引數表修復損毀時有意外的類型\n"

#: stabs.c:5222
#, c-format
msgid "Unrecognized demangle component %d\n"
msgstr "無法識別的損毀修復組成 %d\n"

#: stabs.c:5274
#, c-format
msgid "Failed to print demangled template\n"
msgstr "印出損毀修復之模版失敗\n"

#: stabs.c:5354
#, c-format
msgid "Couldn't get demangled builtin type\n"
msgstr "無法取得損毀修復之內建類型\n"

#: stabs.c:5403
#, c-format
msgid "Unexpected demangled varargs\n"
msgstr "意外的損毀修復變數\n"

#: stabs.c:5410
#, c-format
msgid "Unrecognized demangled builtin type\n"
msgstr "無法識別的損毀修復之內建類型\n"

#: strings.c:201 strings.c:260
#, c-format
msgid "invalid integer argument %s"
msgstr "無效的整數引數 %s"

#: strings.c:263
#, fuzzy, c-format
msgid "invalid minimum string length %d"
msgstr "無效的字串長度"

#: strings.c:660
#, c-format
msgid " Display printable strings in [file(s)] (stdin by default)\n"
msgstr " 顯示 [檔案] (預設為標準輸入) 中可列印的字串\n"

#: strings.c:661
#, fuzzy, c-format
msgid ""
" The options are:\n"
"  -a - --all                Scan the entire file, not just the data section\n"
"  -f --print-file-name      Print the name of the file before each string\n"
"  -n --bytes=[number]       Locate & print any NUL-terminated sequence of at\n"
"  -<number>                   least [number] characters (default 4).\n"
"  -t --radix={o,d,x}        Print the location of the string in base 8, 10 or 16\n"
"  -o                        An alias for --radix=o\n"
"  -T --target=<BFDNAME>     Specify the binary file format\n"
"  -e --encoding={s,S,b,l,B,L} Select character size and endianness:\n"
"                            s = 7-bit, S = 8-bit, {b,l} = 16-bit, {B,L} = 32-bit\n"
"  @<file>                   Read options from <file>\n"
"  -h --help                 Display this information\n"
"  -v -V --version           Print the program's version number\n"
msgstr ""
" 選項為：\n"
"  -a - --all                掃瞄整個檔案，而非只有資料區段\n"
"  -f --print-file-name      在每個字串之前印出檔案的名稱\n"
"  -n --bytes=[number]       定址 & 印出任何以 NUL 結尾的序列於 number\n"
"  -<number>                 至少 [number] 個字元 (預設 4)\n"
"  -t --radix={o,d,x}        以八進位、十進位或十六進位印出字串位置\n"
"  -o                        --radix=o 的別名\n"
"  -T --target=<BFDNAME>     指定二進位檔案格式\n"
"  -e --encoding={s,S,b,l,B,L} 選擇字元大小與尾序：\n"
"                            s=7位元, S=8位元, {b,l}=16位元, {B,L}=32位元\n"
"  -h --help                 顯示本資訊\n"
"  -v --version              顯示程式的版本號碼\n"

#: sysdump.c:647
#, c-format
msgid "Print a human readable interpretation of a SYSROFF object file\n"
msgstr "印出適於閱讀之 SYSROFF 目標檔案的解釋\n"

#: sysdump.c:648
#, c-format
msgid ""
" The options are:\n"
"  -h --help        Display this information\n"
"  -v --version     Print the program's version number\n"
msgstr ""
" 選項為：\n"
"  -h --help        顯示本資訊\n"
"  -v --version     列印程式的版本號碼\n"

#: sysdump.c:715
#, c-format
msgid "cannot open input file %s"
msgstr "無法開啟輸入檔案 %s"

#: version.c:35
#, fuzzy, c-format
msgid "Copyright 2009 Free Software Foundation, Inc.\n"
msgstr "版權所有 2005 自由軟體基金會。\n"

#: version.c:36
#, fuzzy, c-format
msgid ""
"This program is free software; you may redistribute it under the terms of\n"
"the GNU General Public License version 3 or (at your option) any later version.\n"
"This program has absolutely no warranty.\n"
msgstr ""
"本程式是自由軟體；您可以按照 GNU 通用公共許可證\n"
"的條款對其進行再發佈。本程式完全沒有任何擔保。\n"

#: windmc.c:195
#, fuzzy, c-format
msgid "can't create %s file ,%s' for output.\n"
msgstr "無法為輸出而開啟「%s」：%s"

#: windmc.c:203
#, fuzzy, c-format
msgid "Usage: %s [option(s)] [input-file]\n"
msgstr "用法：%s [選項] 輸入檔案\n"

#: windmc.c:205
#, c-format
msgid ""
" The options are:\n"
"  -a --ascii_in                Read input file as ASCII file\n"
"  -A --ascii_out               Write binary messages as ASCII\n"
"  -b --binprefix               .bin filename is prefixed by .mc filename_ for uniqueness.\n"
"  -c --customflag              Set custom flags for messages\n"
"  -C --codepage_in=<val>       Set codepage when reading mc text file\n"
"  -d --decimal_values          Print values to text files decimal\n"
"  -e --extension=<extension>   Set header extension used on export header file\n"
"  -F --target <target>         Specify output target for endianess.\n"
"  -h --headerdir=<directory>   Set the export directory for headers\n"
"  -u --unicode_in              Read input file as UTF16 file\n"
"  -U --unicode_out             Write binary messages as UFT16\n"
"  -m --maxlength=<val>         Set the maximal allowed message length\n"
"  -n --nullterminate           Automatic add a zero termination to strings\n"
"  -o --hresult_use             Use HRESULT definition instead of status code definition\n"
"  -O --codepage_out=<val>      Set codepage used for writing text file\n"
"  -r --rcdir=<directory>       Set the export directory for rc files\n"
"  -x --xdbg=<directory>        Where to create the .dbg C include file\n"
"                               that maps message ID's to their symbolic name.\n"
msgstr ""

#: windmc.c:225
#, fuzzy, c-format
msgid ""
"  -H --help                    Print this help message\n"
"  -v --verbose                 Verbose - tells you what it's doing\n"
"  -V --version                 Print version information\n"
msgstr ""
" 選項為：\n"
"  -h --help                    列印本求助資訊\n"
"  -V --version                 列印版本資訊\n"

#: windmc.c:296 windres.c:415
#, c-format
msgid "%s: warning: "
msgstr "%s：警告："

#: windmc.c:297
#, c-format
msgid "A codepage was specified switch ,%s' and UTF16.\n"
msgstr ""

#: windmc.c:298
#, c-format
msgid "\tcodepage settings are ignored.\n"
msgstr ""

#: windmc.c:342
msgid "try to add a ill language."
msgstr ""

#: windmc.c:1151
#, fuzzy, c-format
msgid "unable to open file ,%s' for input.\n"
msgstr "無法打開輸出檔案 %s"

#: windmc.c:1159
#, fuzzy, c-format
msgid "unable to read contents of %s"
msgstr "無法讀入 %2$s 的 0x%1$x 位元組\n"

#: windmc.c:1171
msgid "input file does not seems to be UFT16.\n"
msgstr ""

#: windres.c:220
#, c-format
msgid "can't open %s `%s': %s"
msgstr "無法開啟 %s「%s」：%s"

#: windres.c:394
#, c-format
msgid ": expected to be a directory\n"
msgstr "：應該是目錄\n"

#: windres.c:406
#, c-format
msgid ": expected to be a leaf\n"
msgstr "：應該是分支\n"

#: windres.c:417
#, c-format
msgid ": duplicate value\n"
msgstr "：重覆的值\n"

#: windres.c:567
#, c-format
msgid "unknown format type `%s'"
msgstr "未知的格式類型「%s」"

#: windres.c:568
#, c-format
msgid "%s: supported formats:"
msgstr "%s：支援的格式："

#. Otherwise, we give up.
#: windres.c:651
#, c-format
msgid "can not determine type of file `%s'; use the -J option"
msgstr "無法確定檔案「%s」的類型；請使用 -J 選項"

#: windres.c:663
#, c-format
msgid "Usage: %s [option(s)] [input-file] [output-file]\n"
msgstr "用法：%s [選項] [輸入檔案] [輸出檔案]\n"

#: windres.c:665
#, fuzzy, c-format
msgid ""
" The options are:\n"
"  -i --input=<file>            Name input file\n"
"  -o --output=<file>           Name output file\n"
"  -J --input-format=<format>   Specify input format\n"
"  -O --output-format=<format>  Specify output format\n"
"  -F --target=<target>         Specify COFF target\n"
"     --preprocessor=<program>  Program to use to preprocess rc file\n"
"  -I --include-dir=<dir>       Include directory when preprocessing rc file\n"
"  -D --define <sym>[=<val>]    Define SYM when preprocessing rc file\n"
"  -U --undefine <sym>          Undefine SYM when preprocessing rc file\n"
"  -v --verbose                 Verbose - tells you what it's doing\n"
"  -c --codepage=<codepage>     Specify default codepage\n"
"  -l --language=<val>          Set language when reading rc file\n"
"     --use-temp-file           Use a temporary file instead of popen to read\n"
"                               the preprocessor output\n"
"     --no-use-temp-file        Use popen (default)\n"
msgstr ""
" 選項為：\n"
"  -i --input=<file>            指名輸入檔案\n"
"  -o --output=<file>           指名輸出檔案\n"
"  -J --input-format=<format>   指定輸入格式\n"
"  -O --output-format=<format>  指定輸出格式\n"
"  -F --target=<target>         指定 COFF 目標\n"
"     --preprocessor=<program>  用於前置處理 rc 檔案的程式\n"
"  -I --include-dir=<dir>       前置處理 rc 檔案時包含的目錄\n"
"  -D --define <sym>[=<val>]    前置處理 rc 檔案時定義 SYM\n"
"  -U --undefine <sym>          前置處理 rc 檔案時解除 SYM\n"
"  -v --verbose                 詳細 - 告訴您正在做什麼\n"
"  -l --language=<val>          讀取 rc 檔案時設定之語言\n"
"     --use-temp-file           使用臨時檔案而非 popen 來讀取前置處理器輸出\n"
"     --no-use-temp-file        使用 popen (預設)\n"

#: windres.c:682
#, c-format
msgid "     --yydebug                 Turn on parser debugging\n"
msgstr "     --yydebug                 打開解析器除錯\n"

#: windres.c:685
#, fuzzy, c-format
msgid ""
"  -r                           Ignored for compatibility with rc\n"
"  @<file>                      Read options from <file>\n"
"  -h --help                    Print this help message\n"
"  -V --version                 Print version information\n"
msgstr ""
" 選項為：\n"
"  -r                           忽略與 rc 的相容性\n"
"  -h --help                    列印本求助訊息\n"
"  -V --version                 列印版本資訊\n"

#: windres.c:690
#, c-format
msgid ""
"FORMAT is one of rc, res, or coff, and is deduced from the file name\n"
"extension if not specified.  A single file name is an input file.\n"
"No input-file is stdin, default rc.  No output-file is stdout, default rc.\n"
msgstr ""
"FORMAT 是 rc、res 或 coff 之一，在未指定時根據檔案的擴展名進行判斷。\n"
"單一檔名被認為是輸入檔案。沒有輸入檔案時就使用標準輸入，預設格式\n"
"為 rc。沒有輸出檔案時就使用標準輸出，預設格式為 rc。\n"

#: windres.c:848
#, fuzzy
msgid "invalid codepage specified.\n"
msgstr "沒有指定操作"

#: windres.c:863
msgid "invalid option -f\n"
msgstr "無效的選項「-f」\n"

#: windres.c:868
msgid "No filename following the -fo option.\n"
msgstr "在選項 -fo 之後沒有檔名。\n"

#: windres.c:927
#, c-format
msgid "Option -I is deprecated for setting the input format, please use -J instead.\n"
msgstr "選項 -I 用做設定輸入格式已過時，請使用 -J 代替。\n"

#: windres.c:1037
msgid "no resources"
msgstr "沒有資源"

#: wrstabs.c:353 wrstabs.c:1916
#, c-format
msgid "string_hash_lookup failed: %s"
msgstr "string_hash_lookup 失敗：%s"

#: wrstabs.c:636
#, c-format
msgid "stab_int_type: bad size %u"
msgstr "stab_int_type：錯誤大小 %u"

#: wrstabs.c:1394
#, c-format
msgid "%s: warning: unknown size for field `%s' in struct"
msgstr "%s：警告：結構中「%s」欄位的大小未知"

#~ msgid "set .nlmsections flags"
#~ msgstr "設定 .nlmsections 旗標"

#~ msgid "there are no sections to be copied!"
#~ msgstr "沒有可供複製的區段！"

#~ msgid "%s: error in %s: %s"
#~ msgstr "%s：區段 %s 中出錯：%s"

#~ msgid "making"
#~ msgstr "製作中"

#~ msgid "size"
#~ msgstr "大小"

#~ msgid "vma"
#~ msgstr "vma"

#~ msgid "alignment"
#~ msgstr "對齊"

#~ msgid "flags"
#~ msgstr "旗標"

#~ msgid "private data"
#~ msgstr "私有資料"

#~ msgid "%s: section `%s': error in %s: %s"
#~ msgstr "%s：區段「%s」：%s 中出錯：%s"

#~ msgid "  Offset: %#08lx  Link to section: %ld (%s)\n"
#~ msgstr "  偏移量：%#08lx  連接到區段：%ld (%s)\n"

#~ msgid "Out of memory"
#~ msgstr "記憶體不足"

#~ msgid "debug_str section data"
#~ msgstr "debug_str 區段資料"

#~ msgid "debug_loc section data"
#~ msgstr "debug_loc 區段資料"

#~ msgid "debug_range section data"
#~ msgstr "debug_range 區段資料"

#~ msgid "%s: skipping unexpected symbol type %s in relocation in section .rela%s\n"
#~ msgstr "%1$s: 在區段 .rela%3$s 中跳過意外的重定位符號類型 %2$s\n"

#~ msgid ""
#~ "The section %s contains:\n"
#~ "\n"
#~ msgstr ""
#~ "%s 區段含有：\n"
#~ "\n"

#~ msgid "Only version 2 and 3 DWARF debug information is currently supported.\n"
#~ msgstr "目前只支援第二與第三版 DWARF 除錯資訊。\n"

#~ msgid "debug_abbrev section data"
#~ msgstr "debug_abbrev 區段資料"

#~ msgid "Unable to locate entry %lu in the abbreviation table\n"
#~ msgstr "無法在縮寫表中找到條目 %lu 的位置\n"

#~ msgid "%s section has more comp units than .debug_info section\n"
#~ msgstr "區段 %s 具有比 .debug_info 區段更多的編譯單元\n"

#~ msgid ""
#~ "assuming that the pointer size is %d, from the last comp unit in .debug_info\n"
#~ "\n"
#~ msgstr ""
#~ "從前一個 .debug_info 中的編譯單元，假定指標大小為 %d\n"
#~ "\n"

#~ msgid "extracting information from .debug_info section"
#~ msgstr "從 .debug_info 區段解開資訊"

#~ msgid "  (Pointer size:               %u)\n"
#~ msgstr "  (指標大小:               %u)\n"

#~ msgid ""
#~ "\n"
#~ "The .debug_loc section is empty.\n"
#~ msgstr ""
#~ "\n"
#~ ".debug_loc 區段為空。\n"

#~ msgid ""
#~ "Contents of the .debug_loc section:\n"
#~ "\n"
#~ msgstr ""
#~ ".debug_loc 區段的內容：\n"
#~ "\n"

#~ msgid ""
#~ "Contents of the .debug_str section:\n"
#~ "\n"
#~ msgstr ""
#~ ".debug_str 區段的內容：\n"
#~ "\n"

#~ msgid ""
#~ "\n"
#~ "The .debug_ranges section is empty.\n"
#~ msgstr ""
#~ "\n"
#~ ".debug_ranges 區段為空。\n"

#~ msgid "Range lists in .debug_info section aren't in ascending order!\n"
#~ msgstr ".debug_info 區段中的範圍列表未依由小到大順序！\n"

#~ msgid ""
#~ "Contents of the .debug_ranges section:\n"
#~ "\n"
#~ msgstr ""
#~ ".debug_ranges 區段的內容：\n"
#~ "\n"

#~ msgid "There is a hole [0x%lx - 0x%lx] in .debug_ranges section.\n"
#~ msgstr "在 .debug_ranges 區段中有一個漏洞 [0x%lx - 0x%lx]。\n"

#~ msgid "There is an overlap [0x%lx - 0x%lx] in .debug_ranges section.\n"
#~ msgstr "在 .debug_ranges 區段中有一個重疊 [0x%lx - 0x%lx]。\n"

#~ msgid "unsupported or unknown DW_CFA_%d\n"
#~ msgstr "不支援或未知的 DW_CFA_%d\n"

#~ msgid "debug section data"
#~ msgstr "除錯區段資料"

#~ msgid "%s: invalid archive string table offset %lu\n"
#~ msgstr "%s：無效的保存檔字串表偏移量 %lu\n"

#~ msgid "can't read resource section"
#~ msgstr "無法讀入資源區段"

#~ msgid "invalid number %s"
#~ msgstr "無效的編號 %s"