# Traditional Chinese translation for gcc.
# Copyright (C) 2005, 06 Free Software Foundation, Inc.
# This file is distributed under the same license as the gcc package.
# Meng Jie <zuxyhere@eastday.com>, 2005.
# Wei-Lun Chao <chaoweilun@pcmail.com.tw>, 2006.
#
msgid ""
msgstr ""
"Project-Id-Version: gcc 4.1.0\n"
"Report-Msgid-Bugs-To: http://gcc.gnu.org/bugs.html\n"
"POT-Creation-Date: 2006-05-24 16:19-0700\n"
"PO-Revision-Date: 2006-03-28 09:19+0800\n"
"Last-Translator: Wei-Lun Chao <chaoweilun@pcmail.com.tw>\n"
"Language-Team: Chinese (traditional) <zh-l10n@linux.org.tw>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=1; plural=0;\n"

#: c-decl.c:3739
msgid "<anonymous>"
msgstr "<anonymous>"

#: c-format.c:343 c-format.c:367
msgid "' ' flag"
msgstr "「 」旗標"

#: c-format.c:343 c-format.c:367
msgid "the ' ' printf flag"
msgstr "「 」printf 旗標"

#: c-format.c:344 c-format.c:368 c-format.c:402 c-format.c:414 c-format.c:471
msgid "'+' flag"
msgstr "「+」旗標"

#: c-format.c:344 c-format.c:368 c-format.c:402 c-format.c:414
msgid "the '+' printf flag"
msgstr "「+」printf 旗標"

#: c-format.c:345 c-format.c:369 c-format.c:415 c-format.c:447
msgid "'#' flag"
msgstr "「#」旗標"

#: c-format.c:345 c-format.c:369 c-format.c:415
msgid "the '#' printf flag"
msgstr "「#」printf 旗標"

#: c-format.c:346 c-format.c:370 c-format.c:445
msgid "'0' flag"
msgstr "「0」旗標"

#: c-format.c:346 c-format.c:370
msgid "the '0' printf flag"
msgstr "「0」printf 旗標"

#: c-format.c:347 c-format.c:371 c-format.c:444 c-format.c:474
msgid "'-' flag"
msgstr "「-」旗標"

#: c-format.c:347 c-format.c:371
msgid "the '-' printf flag"
msgstr "「-」printf 旗標"

#: c-format.c:348 c-format.c:428
msgid "''' flag"
msgstr "「'」旗標"

#: c-format.c:348
msgid "the ''' printf flag"
msgstr "「'」printf 旗標"

#: c-format.c:349 c-format.c:429
msgid "'I' flag"
msgstr "「I」旗標"

#: c-format.c:349
msgid "the 'I' printf flag"
msgstr "「I」printf 旗標"

#: c-format.c:350 c-format.c:372 c-format.c:426 c-format.c:448 c-format.c:475
#: c-format.c:1601 config/sol2-c.c:46
msgid "field width"
msgstr "欄位寬"

#: c-format.c:350 c-format.c:372 config/sol2-c.c:46
msgid "field width in printf format"
msgstr "printf 格式的欄位寬度"

#: c-format.c:351 c-format.c:373 c-format.c:404 c-format.c:417
msgid "precision"
msgstr "精度"

#: c-format.c:351 c-format.c:373 c-format.c:404 c-format.c:417
msgid "precision in printf format"
msgstr "printf 格式的精度"

#: c-format.c:352 c-format.c:374 c-format.c:405 c-format.c:418 c-format.c:427
#: c-format.c:478 config/sol2-c.c:47
msgid "length modifier"
msgstr "長度修飾符"

#: c-format.c:352 c-format.c:374 c-format.c:405 c-format.c:418
#: config/sol2-c.c:47
msgid "length modifier in printf format"
msgstr "printf 格式的長度修飾符"

#: c-format.c:403 c-format.c:416
msgid "'q' flag"
msgstr "「q」旗標"

#: c-format.c:403 c-format.c:416
msgid "the 'q' diagnostic flag"
msgstr "「q」診斷旗標"

#: c-format.c:424
msgid "assignment suppression"
msgstr "取消賦值"

#: c-format.c:424
msgid "the assignment suppression scanf feature"
msgstr "scanf 的取消賦值特性"

#: c-format.c:425
msgid "'a' flag"
msgstr "「a」旗標"

#: c-format.c:425
msgid "the 'a' scanf flag"
msgstr "「a」scanf 旗標"

#: c-format.c:426
msgid "field width in scanf format"
msgstr "scanf 格式的欄位寬"

#: c-format.c:427
msgid "length modifier in scanf format"
msgstr "scanf 格式的長度修飾符"

#: c-format.c:428
msgid "the ''' scanf flag"
msgstr "「'」scanf 旗標"

#: c-format.c:429
msgid "the 'I' scanf flag"
msgstr "「I」scanf 旗標"

#: c-format.c:443
msgid "'_' flag"
msgstr "「_」旗標"

#: c-format.c:443
msgid "the '_' strftime flag"
msgstr "「_」strftime 旗標"

#: c-format.c:444
msgid "the '-' strftime flag"
msgstr "「-」strftime 旗標"

#: c-format.c:445
msgid "the '0' strftime flag"
msgstr "「0」strftime 旗標"

#: c-format.c:446 c-format.c:470
msgid "'^' flag"
msgstr "「^」旗標"

#: c-format.c:446
msgid "the '^' strftime flag"
msgstr "「^」strftime 旗標"

#: c-format.c:447
msgid "the '#' strftime flag"
msgstr "「#」strftime 旗標"

#: c-format.c:448
msgid "field width in strftime format"
msgstr "strftime 格式的欄位寬度"

#: c-format.c:449
msgid "'E' modifier"
msgstr "「E」修飾符"

#: c-format.c:449
msgid "the 'E' strftime modifier"
msgstr "「E」strftime 修飾符"

#: c-format.c:450
msgid "'O' modifier"
msgstr "「O」修飾符"

#: c-format.c:450
msgid "the 'O' strftime modifier"
msgstr "「O」strftime 修飾符"

#: c-format.c:451
msgid "the 'O' modifier"
msgstr "「O」修飾符"

#: c-format.c:469
msgid "fill character"
msgstr "填充字元"

#: c-format.c:469
msgid "fill character in strfmon format"
msgstr "strfmon 格式的填充字元"

#: c-format.c:470
msgid "the '^' strfmon flag"
msgstr "「^」strfmon 旗標"

#: c-format.c:471
msgid "the '+' strfmon flag"
msgstr "「+」strfmon 旗標"

#: c-format.c:472
msgid "'(' flag"
msgstr "「(」旗標"

#: c-format.c:472
msgid "the '(' strfmon flag"
msgstr "「(」strfmon 旗標"

#: c-format.c:473
msgid "'!' flag"
msgstr "「!」旗標"

#: c-format.c:473
msgid "the '!' strfmon flag"
msgstr "「!」strfmon 旗標"

#: c-format.c:474
msgid "the '-' strfmon flag"
msgstr "「-」strfmon 旗標"

#: c-format.c:475
msgid "field width in strfmon format"
msgstr "strfmon 格式的欄位寬度"

#: c-format.c:476
msgid "left precision"
msgstr "左精度"

#: c-format.c:476
msgid "left precision in strfmon format"
msgstr "strfmon 格式的左精度"

#: c-format.c:477
msgid "right precision"
msgstr "右精度"

#: c-format.c:477
msgid "right precision in strfmon format"
msgstr "strfmon 格式的右精度"

#: c-format.c:478
msgid "length modifier in strfmon format"
msgstr "strfmon 格式的長度修飾符"

#: c-format.c:1703
msgid "field precision"
msgstr "欄位精度"

#: c-incpath.c:70
#, c-format
msgid "ignoring duplicate directory \"%s\"\n"
msgstr "忽略重複的目錄「%s」\n"

#: c-incpath.c:73
#, c-format
msgid "  as it is a non-system directory that duplicates a system directory\n"
msgstr "  因為它是一個重複了系統目錄的非系統目錄\n"

#: c-incpath.c:77
#, c-format
msgid "ignoring nonexistent directory \"%s\"\n"
msgstr "忽略不存在的目錄「%s」\n"

#: c-incpath.c:286
#, c-format
msgid "#include \"...\" search starts here:\n"
msgstr "#include \"...\" 搜尋從這裡開始：\n"

#: c-incpath.c:290
#, c-format
msgid "#include <...> search starts here:\n"
msgstr "#include <...> 搜尋從這裡開始：\n"

#: c-incpath.c:295
#, c-format
msgid "End of search list.\n"
msgstr "搜尋清單結束。\n"

#: c-opts.c:1339
msgid "<built-in>"
msgstr "<built-in>"

#: c-opts.c:1355
msgid "<command line>"
msgstr "<command line>"

#: c-typeck.c:2225 c-typeck.c:4592 c-typeck.c:4594 c-typeck.c:4602
#: c-typeck.c:4632 c-typeck.c:6011
msgid "initializer element is not constant"
msgstr "初始值設定元素不是常數"

#: c-typeck.c:4397
msgid "array initialized from parenthesized string constant"
msgstr "用括號中的字串常數初始化陣列"

#: c-typeck.c:4458 cp/typeck2.c:672
#, gcc-internal-format
msgid "char-array initialized from wide string"
msgstr "用寬字串初始化 char 陣列"

#: c-typeck.c:4463
msgid "wchar_t-array initialized from non-wide string"
msgstr "用窄字串初始化 wchar_t 陣列"

#: c-typeck.c:4481 cp/typeck2.c:692
#, gcc-internal-format
msgid "initializer-string for array of chars is too long"
msgstr "用以初始化字元陣列的字串太長"

#: c-typeck.c:4487
msgid "array of inappropriate type initialized from string constant"
msgstr "用字串常數初始化的陣列類型不合適"

#. ??? This should not be an error when inlining calls to
#. unprototyped functions.
#: c-typeck.c:4551 c-typeck.c:4049 cp/typeck.c:1398
#, gcc-internal-format
msgid "invalid use of non-lvalue array"
msgstr "對非左值陣列的無效使用"

#: c-typeck.c:4575
msgid "array initialized from non-constant array expression"
msgstr "用非常數的陣列運算式初始化陣列"

#: c-typeck.c:4639 c-typeck.c:6015
#, gcc-internal-format
msgid "initializer element is not computable at load time"
msgstr "初始值設定中的元素在載入時無法被計算出"

#. Although C99 is unclear about whether incomplete arrays
#. of VLAs themselves count as VLAs, it does not make
#. sense to permit them to be initialized given that
#. ordinary VLAs may not be initialized.
#: c-typeck.c:4650 c-decl.c:3181 c-decl.c:3196
#, gcc-internal-format
msgid "variable-sized object may not be initialized"
msgstr "可變大小的物件不能被初始化"

#: c-typeck.c:4654
msgid "invalid initializer"
msgstr "無效的初始值設定"

#: c-typeck.c:5128
msgid "extra brace group at end of initializer"
msgstr "初始值設定項末尾有多餘的大括號組"

#: c-typeck.c:5148
msgid "missing braces around initializer"
msgstr "初始值設定周圍缺少大括號"

#: c-typeck.c:5209
msgid "braces around scalar initializer"
msgstr "標量初始化帶大括號"

#: c-typeck.c:5266
msgid "initialization of flexible array member in a nested context"
msgstr "在巢狀的上下文中初始化彈性陣列成員"

#: c-typeck.c:5268
msgid "initialization of a flexible array member"
msgstr "對彈性陣列成員的初始化"

#: c-typeck.c:5295
msgid "missing initializer"
msgstr "缺少初始值設定"

#: c-typeck.c:5317
msgid "empty scalar initializer"
msgstr "空的標量初始值設定項"

#: c-typeck.c:5322
msgid "extra elements in scalar initializer"
msgstr "標量初始化設定中有多餘元素"

#: c-typeck.c:5426 c-typeck.c:5486
msgid "array index in non-array initializer"
msgstr "在非陣列初始值設定項中出現陣列索引"

#: c-typeck.c:5431 c-typeck.c:5539
msgid "field name not in record or union initializer"
msgstr "欄位名不在記錄或聯合初始化設定中"

#: c-typeck.c:5477
msgid "array index in initializer not of integer type"
msgstr "初始值設定中陣列索引不是整型"

#: c-typeck.c:5482 c-typeck.c:5484
msgid "nonconstant array index in initializer"
msgstr "初始值設定中陣列索引不是常數"

#: c-typeck.c:5488 c-typeck.c:5491
msgid "array index in initializer exceeds array bounds"
msgstr "初始化時陣列索引越界"

#: c-typeck.c:5502
msgid "empty index range in initializer"
msgstr "初始值設定項中索引範圍為空"

#: c-typeck.c:5511
msgid "array index range in initializer exceeds array bounds"
msgstr "初始值設定中資料索引範圍超出陣列邊界"

#: c-typeck.c:5586 c-typeck.c:5607 c-typeck.c:6079
msgid "initialized field with side-effects overwritten"
msgstr "帶副作用的欄位初始化設定被覆寫"

#: c-typeck.c:6287
msgid "excess elements in char array initializer"
msgstr "字元陣列初始值設定項中有多餘元素"

#: c-typeck.c:6294 c-typeck.c:6340
msgid "excess elements in struct initializer"
msgstr "結構初始值設定項中有多餘元素"

#: c-typeck.c:6355
msgid "non-static initialization of a flexible array member"
msgstr "對彈性陣列成員非靜態地初始化"

#: c-typeck.c:6423
msgid "excess elements in union initializer"
msgstr "聯合初始值設定項中有多餘元素"

#: c-typeck.c:6510
msgid "excess elements in array initializer"
msgstr "陣列初始值設定項中有多餘的元素"

#: c-typeck.c:6540
msgid "excess elements in vector initializer"
msgstr "向量初始值設定項中有多餘元素"

#: c-typeck.c:6564
msgid "excess elements in scalar initializer"
msgstr "標量初始值設定項中有多餘元素"

#: cfgrtl.c:2130
msgid "flow control insn inside a basic block"
msgstr "基本區塊內有流程控制指令"

#: cfgrtl.c:2208
msgid "wrong insn in the fallthru edge"
msgstr "直通邊上的錯誤指令"

#: cfgrtl.c:2250
msgid "insn outside basic block"
msgstr "基本區塊外出現指令"

#: cfgrtl.c:2257
msgid "return not followed by barrier"
msgstr "界線之後沒有 return"

#: cgraph.c:300 ipa-inline.c:296
msgid "function body not available"
msgstr "函式體無法使用"

#: cgraph.c:302 cgraphunit.c:594
msgid "redefined extern inline functions are not considered for inlining"
msgstr "不考慮內聯重定義的外部內聯函式"

#: cgraph.c:305 cgraphunit.c:599
msgid "function not considered for inlining"
msgstr "不考慮內聯函式"

#: cgraph.c:307 cgraphunit.c:597 ipa-inline.c:289
msgid "function not inlinable"
msgstr "函式不能內聯"

#: collect2.c:373 gcc.c:6765
#, c-format
msgid "internal gcc abort in %s, at %s:%d"
msgstr "gcc 內部放棄 %s，於 %s:%d"

#: collect2.c:872
#, c-format
msgid "no arguments"
msgstr "沒有參數"

#: collect2.c:1246 collect2.c:1394 collect2.c:1429
#, c-format
msgid "fopen %s"
msgstr "fopen %s"

#: collect2.c:1249 collect2.c:1399 collect2.c:1432
#, c-format
msgid "fclose %s"
msgstr "fclose %s"

#: collect2.c:1258
#, c-format
msgid "collect2 version %s"
msgstr "collect2 版本 %s"

#: collect2.c:1348
#, c-format
msgid "%d constructor(s) found\n"
msgstr "找到 %d 個建構式\n"

#: collect2.c:1349
#, c-format
msgid "%d destructor(s)  found\n"
msgstr "找到 %d 個解構函式\n"

#: collect2.c:1350
#, c-format
msgid "%d frame table(s) found\n"
msgstr "找到了 %d 個框架表\n"

#: collect2.c:1487
#, c-format
msgid "can't get program status"
msgstr "無法獲取程式狀態"

#: collect2.c:1537
#, c-format
msgid "[cannot find %s]"
msgstr "[找不到 %s]"

#: collect2.c:1552
#, c-format
msgid "cannot find '%s'"
msgstr "找不到「%s」"

#: collect2.c:1556 collect2.c:2045 collect2.c:2200 gcc.c:2809
#, c-format
msgid "pex_init failed"
msgstr "pex_init 失敗"

#: collect2.c:1591
#, c-format
msgid "[Leaving %s]\n"
msgstr "[離開 %s]\n"

#: collect2.c:1811
#, c-format
msgid ""
"\n"
"write_c_file - output name is %s, prefix is %s\n"
msgstr ""
"\n"
"write_c_file - 輸出名為 %s，字首為 %s\n"

#: collect2.c:2019
#, c-format
msgid "cannot find 'nm'"
msgstr "找不到 「nm」"

#: collect2.c:2066
#, c-format
msgid "can't open nm output"
msgstr "無法開啟 nm 的輸出"

#: collect2.c:2110
#, c-format
msgid "init function found in object %s"
msgstr "在物件 %s 中發現 init 函式"

#: collect2.c:2118
#, c-format
msgid "fini function found in object %s"
msgstr "在物件 %s 中發現 fini 函式"

#: collect2.c:2221
#, c-format
msgid "can't open ldd output"
msgstr "無法開啟 ldd 輸出"

#: collect2.c:2224
#, c-format
msgid ""
"\n"
"ldd output with constructors/destructors.\n"
msgstr ""
"\n"
"ldd 輸出帶有建構/解構函式。\n"

#: collect2.c:2239
#, c-format
msgid "dynamic dependency %s not found"
msgstr "找不到動態依賴項 %s"

#: collect2.c:2251
#, c-format
msgid "unable to open dynamic dependency '%s'"
msgstr "無法開啟動態依賴項「%s」"

#: collect2.c:2407
#, c-format
msgid "%s: not a COFF file"
msgstr "%s：不是一個 COFF 檔案"

#: collect2.c:2527
#, c-format
msgid "%s: cannot open as COFF file"
msgstr "%s：無法開啟 COFF 檔案"

#: collect2.c:2585
#, c-format
msgid "library lib%s not found"
msgstr "找不到函式庫 lib%s"

#: cppspec.c:106
#, c-format
msgid "\"%s\" is not a valid option to the preprocessor"
msgstr "「%s」不是前處理器的有效選項"

#: cppspec.c:128
#, c-format
msgid "too many input files"
msgstr "輸入檔案太多"

#: diagnostic.c:186
#, c-format
msgid "%s:%d: confused by earlier errors, bailing out\n"
msgstr "%s：%d：不能從先前的錯誤中恢復，離開\n"

#: diagnostic.c:246
#, c-format
msgid "compilation terminated due to -Wfatal-errors.\n"
msgstr "編譯因為 -Wfatal-errors 而中止。\n"

#: diagnostic.c:255
#, c-format
msgid ""
"Please submit a full bug report,\n"
"with preprocessed source if appropriate.\n"
"See %s for instructions.\n"
msgstr ""
"請提交一份完整的錯誤報告，\n"
"如有可能請附上經預先處理後的來源檔案。\n"
"具體步驟請參見 %s。\n"

#: diagnostic.c:264
#, c-format
msgid "compilation terminated.\n"
msgstr "編譯插斷。\n"

#: diagnostic.c:583
#, c-format
msgid "Internal compiler error: Error reporting routines re-entered.\n"
msgstr "內部編譯器錯誤：重入錯誤報告程式。\n"

#: final.c:1110
msgid "negative insn length"
msgstr "指令長度為負"

#: final.c:2479
msgid "could not split insn"
msgstr "無法分離指令"

#: final.c:2828
msgid "invalid 'asm': "
msgstr "無效的「asm」："

#: final.c:3011
#, c-format
msgid "nested assembly dialect alternatives"
msgstr "巢狀的組譯風格指示"

#: final.c:3028 final.c:3040
#, c-format
msgid "unterminated assembly dialect alternative"
msgstr "未結束的組譯風格指示"

#: final.c:3087
#, c-format
msgid "operand number missing after %%-letter"
msgstr "%% 字母後缺少運算元號"

#: final.c:3090 final.c:3131
#, c-format
msgid "operand number out of range"
msgstr "運算元號超出範圍"

#: final.c:3150
#, c-format
msgid "invalid %%-code"
msgstr "無效的 %%-code"

#: final.c:3180
#, c-format
msgid "'%%l' operand isn't a label"
msgstr "「%%l」運算元不是一個標籤"

#. We can't handle floating point constants;
#. PRINT_OPERAND must handle them.
#. We can't handle floating point constants; PRINT_OPERAND must
#. handle them.
#. We can't handle floating point constants;
#. PRINT_OPERAND must handle them.
#: final.c:3281 vmsdbgout.c:487 config/i386/i386.c:6642
#: config/pdp11/pdp11.c:1700
#, c-format
msgid "floating constant misused"
msgstr "錯誤地使用了浮點常數"

#: final.c:3337 vmsdbgout.c:544 config/i386/i386.c:6718
#: config/pdp11/pdp11.c:1747
#, c-format
msgid "invalid expression as operand"
msgstr "無效的運算式做為運算元"

#: flow.c:1699
msgid "Attempt to delete prologue/epilogue insn:"
msgstr "試圖刪除前言/尾聲指令："

#: gcc.c:1641
#, c-format
msgid "Using built-in specs.\n"
msgstr "使用內建 specs。\n"

#: gcc.c:1824
#, c-format
msgid ""
"Setting spec %s to '%s'\n"
"\n"
msgstr ""
"將 spec %s 設為「%s」\n"
"\n"

#: gcc.c:1939
#, c-format
msgid "Reading specs from %s\n"
msgstr "從 %s 讀取 specs\n"

#: gcc.c:2035 gcc.c:2054
#, c-format
msgid "specs %%include syntax malformed after %ld characters"
msgstr "specs %%include 在 %ld 字元後語法格式錯誤"

#: gcc.c:2062
#, c-format
msgid "could not find specs file %s\n"
msgstr "找不到 specs 檔案 %s\n"

#: gcc.c:2079 gcc.c:2087 gcc.c:2096 gcc.c:2105
#, c-format
msgid "specs %%rename syntax malformed after %ld characters"
msgstr "specs %%rename 在 %ld 字元後語法格式錯誤"

#: gcc.c:2114
#, c-format
msgid "specs %s spec was not found to be renamed"
msgstr "specs 找不到 %s spec 或已被重新命名"

#: gcc.c:2121
#, c-format
msgid "%s: attempt to rename spec '%s' to already defined spec '%s'"
msgstr "%s：試圖將 spec「%s」重新命名為已定義的 spec「%s」"

#: gcc.c:2126
#, c-format
msgid "rename spec %s to %s\n"
msgstr "將 spec %s 重新命名為 %s\n"

#: gcc.c:2128
#, c-format
msgid ""
"spec is '%s'\n"
"\n"
msgstr ""
"spec 是「%s」\n"
"\n"

#: gcc.c:2141
#, c-format
msgid "specs unknown %% command after %ld characters"
msgstr "specs 在 %ld 字元後出現不明的 %% 命令"

#: gcc.c:2152 gcc.c:2165
#, c-format
msgid "specs file malformed after %ld characters"
msgstr "specs 在 %ld 字元後檔案格式錯誤"

#: gcc.c:2218
#, c-format
msgid "spec file has no spec for linking"
msgstr "spec 檔案沒有對連結的設定"

#: gcc.c:2640
#, c-format
msgid "system path '%s' is not absolute"
msgstr "系統路徑「%s」不是絕對路徑"

#: gcc.c:2703
#, c-format
msgid "-pipe not supported"
msgstr "不支援 -pipe"

#: gcc.c:2765
#, c-format
msgid ""
"\n"
"Go ahead? (y or n) "
msgstr ""
"\n"
"繼續？(y 或 n) "

#: gcc.c:2848
msgid "failed to get exit status"
msgstr "無法獲取離開狀態"

#: gcc.c:2854
msgid "failed to get process times"
msgstr "無法獲取處理序時間"

#: gcc.c:2877
#, c-format
msgid ""
"Internal error: %s (program %s)\n"
"Please submit a full bug report.\n"
"See %s for instructions."
msgstr ""
"內部錯誤：%s (程式 %s)\n"
"請提交一份完整的錯誤報告。\n"
"具體步驟請參見 %s。"

#: gcc.c:2905
#, c-format
msgid "# %s %.2f %.2f\n"
msgstr "# %s %.2f %.2f\n"

#: gcc.c:3041
#, c-format
msgid "Usage: %s [options] file...\n"
msgstr "用法：%s [選項] 檔案...\n"

#: gcc.c:3042
msgid "Options:\n"
msgstr "選項：\n"

#: gcc.c:3044
msgid "  -pass-exit-codes         Exit with highest error code from a phase\n"
msgstr "  -pass-exit-codes         在某一階段離開時回傳最高的錯誤碼\n"

#: gcc.c:3045
msgid "  --help                   Display this information\n"
msgstr "  --help                   顯示此輔助說明\n"

#: gcc.c:3046
msgid "  --target-help            Display target specific command line options\n"
msgstr "  --target-help            顯示目標平臺器特定的命令列選項\n"

#: gcc.c:3048
msgid "  (Use '-v --help' to display command line options of sub-processes)\n"
msgstr "  (使用「-v --help」顯示子處理序的命令列參數)\n"

#: gcc.c:3049
msgid "  -dumpspecs               Display all of the built in spec strings\n"
msgstr "  -dumpspecs               顯示所有內建 spec 字串\n"

#: gcc.c:3050
msgid "  -dumpversion             Display the version of the compiler\n"
msgstr "  -dumpversion             顯示編譯器的版本號\n"

#: gcc.c:3051
msgid "  -dumpmachine             Display the compiler's target processor\n"
msgstr "  -dumpmachine             顯示編譯器的目的處理器\n"

#: gcc.c:3052
msgid "  -print-search-dirs       Display the directories in the compiler's search path\n"
msgstr "  -print-search-dirs       顯示編譯器的搜尋路徑\n"

#: gcc.c:3053
msgid "  -print-libgcc-file-name  Display the name of the compiler's companion library\n"
msgstr "  -print-libgcc-file-name  顯示編譯器伴隨函式庫的名稱\n"

#: gcc.c:3054
msgid "  -print-file-name=<lib>   Display the full path to library <lib>\n"
msgstr "  -print-file-name=<函式庫>    顯示 <函式庫> 的完整路徑\n"

#: gcc.c:3055
msgid "  -print-prog-name=<prog>  Display the full path to compiler component <prog>\n"
msgstr "  -print-prog-name=<程式>  顯示編譯器元件 <程式> 的完整路徑\n"

#: gcc.c:3056
msgid "  -print-multi-directory   Display the root directory for versions of libgcc\n"
msgstr "  -print-multi-directory   顯示不同版本 libgcc 的根目錄\n"

#: gcc.c:3057
msgid ""
"  -print-multi-lib         Display the mapping between command line options and\n"
"                           multiple library search directories\n"
msgstr "  -print-multi-lib         顯示命令列選項和多個版本函式庫搜尋路徑間的對應\n"

#: gcc.c:3060
msgid "  -print-multi-os-directory Display the relative path to OS libraries\n"
msgstr "  -print-multi-os-directory 顯示作業系統函式庫的相對路徑\n"

#: gcc.c:3061
msgid "  -Wa,<options>            Pass comma-separated <options> on to the assembler\n"
msgstr "  -Wa,<選項>               將逗號分隔的 <選項> 傳遞給組譯器\n"

#: gcc.c:3062
msgid "  -Wp,<options>            Pass comma-separated <options> on to the preprocessor\n"
msgstr "  -Wp,<選項>               將逗號分隔的 <選項> 傳遞給前處理器\n"

#: gcc.c:3063
msgid "  -Wl,<options>            Pass comma-separated <options> on to the linker\n"
msgstr "  -Wl,<選項>               將逗號分隔的 <選項> 傳遞給連結器\n"

#: gcc.c:3064
msgid "  -Xassembler <arg>        Pass <arg> on to the assembler\n"
msgstr "  -Xassembler <參數>       將 <參數> 傳遞給組譯器\n"

#: gcc.c:3065
msgid "  -Xpreprocessor <arg>     Pass <arg> on to the preprocessor\n"
msgstr "  -Xpreprocessor <參數>    將 <參數> 傳遞給前處理器\n"

#: gcc.c:3066
msgid "  -Xlinker <arg>           Pass <arg> on to the linker\n"
msgstr "  -Xlinker <參數>          將 <參數> 傳遞給連結器\n"

#: gcc.c:3067
msgid "  -combine                 Pass multiple source files to compiler at once\n"
msgstr "  -combine                 將多個來源檔案一次性傳遞給組譯器\n"

#: gcc.c:3068
msgid "  -save-temps              Do not delete intermediate files\n"
msgstr "  -save-temps              不要刪除中間檔案\n"

#: gcc.c:3069
msgid "  -pipe                    Use pipes rather than intermediate files\n"
msgstr "  -pipe                    使用管道代替暫時檔案\n"

#: gcc.c:3070
msgid "  -time                    Time the execution of each subprocess\n"
msgstr "  -time                    為每個子處理序計時\n"

#: gcc.c:3071
msgid "  -specs=<file>            Override built-in specs with the contents of <file>\n"
msgstr "  -specs=<檔案>            用 <檔案> 的內容覆寫內建的 specs 檔案\n"

#: gcc.c:3072
msgid "  -std=<standard>          Assume that the input sources are for <standard>\n"
msgstr "  -std=<標準>              指定輸入來源檔案遵循的標準\n"

#: gcc.c:3073
msgid ""
"  --sysroot=<directory>    Use <directory> as the root directory for headers\n"
"                           for headers and libraries\n"
msgstr "  --sysroot=<目錄>         將 <目錄> 做為標頭檔案和函式庫檔案的根目錄\n"

#: gcc.c:3076
msgid "  -B <directory>           Add <directory> to the compiler's search paths\n"
msgstr "  -B <目錄>                將 <目錄> 加入到編譯器的搜尋路徑中\n"

#: gcc.c:3077
msgid "  -b <machine>             Run gcc for target <machine>, if installed\n"
msgstr "  -b <機器>                為 gcc 指定目標平臺器(如果有安裝)\n"

#: gcc.c:3078
msgid "  -V <version>             Run gcc version number <version>, if installed\n"
msgstr "  -V <版本>                執行指定版本的 gcc(如果有安裝)\n"

#: gcc.c:3079
msgid "  -v                       Display the programs invoked by the compiler\n"
msgstr "  -v                       顯示編譯器呼叫的程式\n"

#: gcc.c:3080
msgid "  -###                     Like -v but options quoted and commands not executed\n"
msgstr "  -###                     與 -v 類似，但選項被引號括住，並且不執行命令\n"

#: gcc.c:3081
msgid "  -E                       Preprocess only; do not compile, assemble or link\n"
msgstr "  -E                       僅作預先處理，不進行編譯、組譯和連結\n"

#: gcc.c:3082
msgid "  -S                       Compile only; do not assemble or link\n"
msgstr "  -S                       編譯到組合語言，不進行組譯和連結\n"

#: gcc.c:3083
msgid "  -c                       Compile and assemble, but do not link\n"
msgstr "  -c                       編譯、組譯到目的程式碼，不進行連結\n"

#: gcc.c:3084
msgid "  -o <file>                Place the output into <file>\n"
msgstr "  -o <檔案>                輸出到 <檔案>\n"

#: gcc.c:3085
msgid ""
"  -x <language>            Specify the language of the following input files\n"
"                           Permissible languages include: c c++ assembler none\n"
"                           'none' means revert to the default behavior of\n"
"                           guessing the language based on the file's extension\n"
msgstr ""
"  -x <語言>                指定其後輸入檔案的語言\n"
"                           允許的語言包括：c c++ assembler none\n"
"                           「none」意味著恢復預設行為，即根據檔案的副檔名猜測\n"
"                           來源檔案的語言\n"

#: gcc.c:3092
#, c-format
msgid ""
"\n"
"Options starting with -g, -f, -m, -O, -W, or --param are automatically\n"
" passed on to the various sub-processes invoked by %s.  In order to pass\n"
" other options on to these processes the -W<letter> options must be used.\n"
msgstr ""
"\n"
"以 -g、-f、-m、-O、-W 或 --param 開頭的選項將由 %s 自動傳遞給其呼叫的\n"
" 不同子處理序。若要向這些處理序傳遞其它選項，必須使用 -W<字母> 選項。\n"

#: gcc.c:3215
#, c-format
msgid "'-%c' option must have argument"
msgstr "「-%c」選項必須有一個參數"

#: gcc.c:3237
#, c-format
msgid "couldn't run '%s': %s"
msgstr "無法執行「%s」：%s"

#. translate_options () has turned --version into -fversion.
#: gcc.c:3422
#, c-format
msgid "%s (GCC) %s\n"
msgstr "%s (GCC) %s\n"

#: gcc.c:3424 gcov.c:415 fortran/gfortranspec.c:351 java/gjavah.c:2406
#: java/jcf-dump.c:931 java/jv-scan.c:129
msgid "(C)"
msgstr "(C)"

#: gcc.c:3425 java/gjavah.c:2407 java/jcf-dump.c:932 java/jv-scan.c:130
#, c-format
msgid ""
"This is free software; see the source for copying conditions.  There is NO\n"
"warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.\n"
"\n"
msgstr ""
"本程式是自由軟體；請參看來源程式碼的版權宣告。本軟體沒有任何擔保；\n"
"包括沒有適銷性和某一專用目的下的適用性擔保。\n"

#: gcc.c:3526
#, c-format
msgid "argument to '-Xlinker' is missing"
msgstr "「-Xlinker」缺少引數"

#: gcc.c:3534
#, c-format
msgid "argument to '-Xpreprocessor' is missing"
msgstr "「-Xpreprocessor」缺少引數"

#: gcc.c:3541
#, c-format
msgid "argument to '-Xassembler' is missing"
msgstr "「-Xassembler」缺少引數"

#: gcc.c:3548
#, c-format
msgid "argument to '-l' is missing"
msgstr "「-l」缺少引數"

#: gcc.c:3569
#, c-format
msgid "argument to '-specs' is missing"
msgstr "「-specs」缺少引數"

#: gcc.c:3583
#, c-format
msgid "argument to '-specs=' is missing"
msgstr "「-Xlinker」缺少引數"

#: gcc.c:3621
#, c-format
msgid "'-%c' must come at the start of the command line"
msgstr "「-%c」必須出現在命令列的開頭"

#: gcc.c:3630
#, c-format
msgid "argument to '-B' is missing"
msgstr "「-B」缺少引數"

#: gcc.c:4016
#, c-format
msgid "argument to '-x' is missing"
msgstr "「-x」缺少引數"

#: gcc.c:4044
#, c-format
msgid "argument to '-%s' is missing"
msgstr "「-%s」缺少引數"

#: gcc.c:4382
#, c-format
msgid "switch '%s' does not start with '-'"
msgstr "開關「%s」未以「-」開頭"

#: gcc.c:4612
#, c-format
msgid "spec '%s' invalid"
msgstr "spec「%s」無效"

#: gcc.c:4678
#, c-format
msgid "%s\n"
msgstr "%s\n"

#: gcc.c:4751
#, c-format
msgid "spec '%s' has invalid '%%0%c'"
msgstr "spec「%s」有無效的「%%0%c」"

#: gcc.c:4948
#, c-format
msgid "spec '%s' has invalid '%%W%c"
msgstr "spec「%s」有無效的「%%W%c」"

#: gcc.c:4979
#, c-format
msgid "spec '%s' has invalid '%%x%c'"
msgstr "spec「%s」有無效的「%%x%c」"

#: gcc.c:5201
#, c-format
msgid "Processing spec %c%s%c, which is '%s'\n"
msgstr "處理 spec %c%s%c，即「%s」\n"

#: gcc.c:5343
#, c-format
msgid "unknown spec function '%s'"
msgstr "不明的 spec 函式「%s」"

#: gcc.c:5362
#, c-format
msgid "error in args to spec function '%s'"
msgstr "給 spec 函式「%s」的參數不正確"

#: gcc.c:5410
#, c-format
msgid "malformed spec function name"
msgstr "spec 函式名格式錯誤"

#. )
#: gcc.c:5413
#, c-format
msgid "no arguments for spec function"
msgstr "spec 函式沒有引數"

#: gcc.c:5432
#, c-format
msgid "malformed spec function arguments"
msgstr "spec 函式引數格式錯誤"

#: gcc.c:5671
#, c-format
msgid "braced spec '%s' is invalid at '%c'"
msgstr "大括號中的 spec「%s」在「%c」中無效"

#: gcc.c:5759
#, c-format
msgid "braced spec body '%s' is invalid"
msgstr "大括號中的 spec 體「%s」無效"

#: gcc.c:6306
#, c-format
msgid "install: %s%s\n"
msgstr "安裝：%s%s\n"

#: gcc.c:6307
#, c-format
msgid "programs: %s\n"
msgstr "程式：%s\n"

#: gcc.c:6308
#, c-format
msgid "libraries: %s\n"
msgstr "函式庫：%s\n"

#: gcc.c:6365
#, c-format
msgid ""
"\n"
"For bug reporting instructions, please see:\n"
msgstr ""
"\n"
"報告程式缺陷的步驟請參見：\n"

#: gcc.c:6381
#, c-format
msgid "Target: %s\n"
msgstr "目的：%s\n"

#: gcc.c:6382
#, c-format
msgid "Configured with: %s\n"
msgstr "配置為：%s\n"

#: gcc.c:6396
#, c-format
msgid "Thread model: %s\n"
msgstr "執行緒模型：%s\n"

#: gcc.c:6407
#, c-format
msgid "gcc version %s\n"
msgstr "gcc 版本 %s\n"

#: gcc.c:6409
#, c-format
msgid "gcc driver version %s executing gcc version %s\n"
msgstr "版本為 %s 的 gcc 驅動執行版本為 %s 的gcc\n"

#: gcc.c:6417
#, c-format
msgid "no input files"
msgstr "沒有輸入檔案"

#: gcc.c:6466
#, c-format
msgid "cannot specify -o with -c or -S with multiple files"
msgstr "當有多個檔案時不能在已指定 -c 或 -S 的情況下指定 -o"

#: gcc.c:6500
#, c-format
msgid "spec '%s' is invalid"
msgstr "spec「%s」是無效的"

#: gcc.c:6965
#, c-format
msgid "multilib spec '%s' is invalid"
msgstr "multilib spec「%s」無效"

#: gcc.c:7157
#, c-format
msgid "multilib exclusions '%s' is invalid"
msgstr "multilib 排除「%s」無效"

#: gcc.c:7215 gcc.c:7356
#, c-format
msgid "multilib select '%s' is invalid"
msgstr "multilib 選擇「%s」無效"

#: gcc.c:7394
#, c-format
msgid "multilib exclusion '%s' is invalid"
msgstr "multilib 排除「%s」無效"

#: gcc.c:7653 gcc.c:7658
#, c-format
msgid "invalid version number `%s'"
msgstr "無效的版本號「%s」"

#: gcc.c:7701
#, c-format
msgid "too few arguments to %%:version-compare"
msgstr "%%：version-compare 的引數太少"

#: gcc.c:7707
#, c-format
msgid "too many arguments to %%:version-compare"
msgstr "%%：version-compare 的引數太多"

#: gcc.c:7748
#, c-format
msgid "unknown operator '%s' in %%:version-compare"
msgstr "%%:version-compare 中有不明的運算元「%s」"

#: gcov.c:388
#, c-format
msgid ""
"Usage: gcov [OPTION]... SOURCEFILE\n"
"\n"
msgstr ""
"用法：gconv [選項]... 來源檔案\n"
"\n"

#: gcov.c:389
#, c-format
msgid ""
"Print code coverage information.\n"
"\n"
msgstr ""
"顯示程式碼覆寫資訊。\n"
"\n"

#: gcov.c:390
#, c-format
msgid "  -h, --help                      Print this help, then exit\n"
msgstr "  -h, --help                      列印此輔助並離開\n"

#: gcov.c:391
#, c-format
msgid "  -v, --version                   Print version number, then exit\n"
msgstr "  -v, --version                    列印版本號並離開\n"

#: gcov.c:392
#, c-format
msgid "  -a, --all-blocks                Show information for every basic block\n"
msgstr "  -a, --all-blocks                顯示每個基本區塊的資訊\n"

#: gcov.c:393
#, c-format
msgid "  -b, --branch-probabilities      Include branch probabilities in output\n"
msgstr "  -b, --branch-probabilities      輸出包含分支概率\n"

#: gcov.c:394
#, c-format
msgid ""
"  -c, --branch-counts             Given counts of branches taken\n"
"                                    rather than percentages\n"
msgstr "  -c, --branch-counts             給出跳轉的分支數，而不是百分比\n"

#: gcov.c:396
#, c-format
msgid "  -n, --no-output                 Do not create an output file\n"
msgstr "  -n, --no-output                 不建立輸出檔案\n"

#: gcov.c:397
#, c-format
msgid ""
"  -l, --long-file-names           Use long output file names for included\n"
"                                    source files\n"
msgstr "  -l, --long-file-names           為包含進來的來源檔案使用長輸出檔案名稱\n"

#: gcov.c:399
#, c-format
msgid "  -f, --function-summaries        Output summaries for each function\n"
msgstr "  -f, --function-summaries        輸出每個函式的小結資訊\n"

#: gcov.c:400
#, c-format
msgid "  -o, --object-directory DIR|FILE Search for object files in DIR or called FILE\n"
msgstr "  -o, --object-directory DIR|FILE 在 DIR 中搜尋目的檔案，或搜尋名為 FILE 的目的檔案\n"

#: gcov.c:401
#, c-format
msgid "  -p, --preserve-paths            Preserve all pathname components\n"
msgstr "  -p, --preserve-paths            保留所有路徑名\n"

#: gcov.c:402
#, c-format
msgid "  -u, --unconditional-branches    Show unconditional branch counts too\n"
msgstr "  -u, --unconditional-branches    同時顯示無條件跳轉數\n"

#: gcov.c:403
#, c-format
msgid ""
"\n"
"For bug reporting instructions, please see:\n"
"%s.\n"
msgstr ""
"\n"
"提交錯誤報告的具體步驟請參見：\n"
"%s。\n"

#: gcov.c:413
#, c-format
msgid "gcov (GCC) %s\n"
msgstr "gcov (GCC) %s\n"

#: gcov.c:417
#, c-format
msgid ""
"This is free software; see the source for copying conditions.\n"
"There is NO warranty; not even for MERCHANTABILITY or \n"
"FITNESS FOR A PARTICULAR PURPOSE.\n"
"\n"
msgstr ""
"本程式是自由軟體；請參看來源程式碼的版權宣告。本軟體沒有任何擔保；\n"
"包括沒有適銷性和某一專用目的下的適用性擔保。\n"

#: gcov.c:507
#, c-format
msgid "%s:no functions found\n"
msgstr "%s：找不到函式\n"

#: gcov.c:528 gcov.c:556 fortran/dump-parse-tree.c:68
#, c-format
msgid "\n"
msgstr "\n"

#: gcov.c:543
#, c-format
msgid "%s:creating '%s'\n"
msgstr "%s：正在建立「%s」\n"

#: gcov.c:547
#, c-format
msgid "%s:error writing output file '%s'\n"
msgstr "%s：寫入輸出檔案「%s」時發生錯誤\n"

#: gcov.c:552
#, c-format
msgid "%s:could not open output file '%s'\n"
msgstr "%s：無法開啟輸出檔案「%s」\n"

#: gcov.c:703
#, c-format
msgid "%s:cannot open graph file\n"
msgstr "%s：無法開啟圖檔案\n"

#: gcov.c:709
#, c-format
msgid "%s:not a gcov graph file\n"
msgstr "%s：不是一個 gcov 圖檔案\n"

#: gcov.c:722
#, c-format
msgid "%s:version '%.4s', prefer '%.4s'\n"
msgstr "%s：版本「%.4s」，偏好「%.4s」\n"

#: gcov.c:774
#, c-format
msgid "%s:already seen blocks for '%s'\n"
msgstr "%s:已經看到「%s」的區塊\n"

#: gcov.c:892 gcov.c:1048
#, c-format
msgid "%s:corrupted\n"
msgstr "%s：已損壞\n"

#: gcov.c:966
#, c-format
msgid "%s:cannot open data file\n"
msgstr "%s：無法開啟資料檔案\n"

#: gcov.c:971
#, c-format
msgid "%s:not a gcov data file\n"
msgstr "%s：不是一個 gcov 資料檔案\n"

#: gcov.c:984
#, c-format
msgid "%s:version '%.4s', prefer version '%.4s'\n"
msgstr "%s：版本「%.4s」，偏好版本「%.4s」\n"

#: gcov.c:990
#, c-format
msgid "%s:stamp mismatch with graph file\n"
msgstr "%s：時間戳記與圖檔案不匹配\n"

#: gcov.c:1016
#, c-format
msgid "%s:unknown function '%u'\n"
msgstr "%s：不明函式「%u」\n"

#: gcov.c:1029
#, c-format
msgid "%s:profile mismatch for '%s'\n"
msgstr "%s：樣本檔案與「%s」不匹配\n"

#: gcov.c:1048
#, c-format
msgid "%s:overflowed\n"
msgstr "%s：溢出\n"

#: gcov.c:1072
#, c-format
msgid "%s:'%s' lacks entry and/or exit blocks\n"
msgstr "%s：「%s」缺少入口/出口塊\n"

#: gcov.c:1077
#, c-format
msgid "%s:'%s' has arcs to entry block\n"
msgstr "%s：「%s」有去往入口塊的弧\n"

#: gcov.c:1085
#, c-format
msgid "%s:'%s' has arcs from exit block\n"
msgstr "%s：「%s」有來自出口區塊的弧\n"

#: gcov.c:1293
#, c-format
msgid "%s:graph is unsolvable for '%s'\n"
msgstr "%s：圖為「%s」不可解\n"

#: gcov.c:1373
#, c-format
msgid "%s '%s'\n"
msgstr "%s「%s」\n"

#: gcov.c:1376
#, c-format
msgid "Lines executed:%s of %d\n"
msgstr "已執行的列數：%s (共 %d 列)\n"

#: gcov.c:1380
#, c-format
msgid "No executable lines\n"
msgstr "沒有可執行列\n"

#: gcov.c:1386
#, c-format
msgid "Branches executed:%s of %d\n"
msgstr "執行的分支：%s (共有 %d 個)\n"

#: gcov.c:1390
#, c-format
msgid "Taken at least once:%s of %d\n"
msgstr "至少執行一次的跳轉：%s(總數為 %d)\n"

#: gcov.c:1396
#, c-format
msgid "No branches\n"
msgstr "沒有跳轉\n"

#: gcov.c:1398
#, c-format
msgid "Calls executed:%s of %d\n"
msgstr "執行的呼叫：%s(共 %d)\n"

#: gcov.c:1402
#, c-format
msgid "No calls\n"
msgstr "沒有呼叫\n"

#: gcov.c:1543
#, c-format
msgid "%s:no lines for '%s'\n"
msgstr "%s：「%s」沒有列\n"

#: gcov.c:1738
#, c-format
msgid "call   %2d returned %s\n"
msgstr "call   %2d 回傳了 %s\n"

#: gcov.c:1743
#, c-format
msgid "call   %2d never executed\n"
msgstr "call   %2d 從未被執行\n"

#: gcov.c:1748
#, c-format
msgid "branch %2d taken %s%s\n"
msgstr "branch %2d 被執行 %s%s\n"

#: gcov.c:1752
#, c-format
msgid "branch %2d never executed\n"
msgstr "branch %2d 從未被執行\n"

#: gcov.c:1757
#, c-format
msgid "unconditional %2d taken %s\n"
msgstr "unconditional %2d 被執行 %s\n"

#: gcov.c:1760
#, c-format
msgid "unconditional %2d never executed\n"
msgstr "無條件 %2d 從未執行\n"

#: gcov.c:1792
#, c-format
msgid "%s:cannot open source file\n"
msgstr "%s：無法開啟來源檔案\n"

#: gcov.c:1802
#, c-format
msgid "%s:source file is newer than graph file '%s'\n"
msgstr "%s：來源檔案較圖檔案「%s」新\n"

#. Return if there's nothing to do, or it is too expensive.
#: gcse.c:694
msgid "GCSE disabled"
msgstr "GCSE 被停用"

#. Return if there's nothing to do, or it is too expensive.
#: gcse.c:6526
msgid "jump bypassing disabled"
msgstr "略過跳越指令被停用"

#. Opening quotation mark.
#: intl.c:58
msgid "`"
msgstr "「"

#. Closing quotation mark.
#: intl.c:61
msgid "'"
msgstr "」"

#: ipa-inline.c:275
msgid "--param large-function-growth limit reached"
msgstr "到達 --param large-function-growth 給定的極值"

#: ipa-inline.c:305
msgid "--param max-inline-insns-single limit reached"
msgstr "到達 --param max-inline-insns-single 給定的極值"

#: ipa-inline.c:314
msgid "--param max-inline-insns-auto limit reached"
msgstr "到達 --param max-inline-insns-single 給定的極值"

#: ipa-inline.c:340 ipa-inline.c:766
msgid "recursive inlining"
msgstr "遞迴內聯"

#: ipa-inline.c:779
msgid "call is unlikely"
msgstr "不太可能呼叫"

#: ipa-inline.c:850
msgid "--param inline-unit-growth limit reached"
msgstr "到達 --param inline-unit-growth 給定的極值"

#: langhooks.c:507
msgid "At top level:"
msgstr "在頂層："

#: langhooks.c:512
#, c-format
msgid "In member function %qs:"
msgstr "在成員函式 %qs 中："

#: langhooks.c:516
#, c-format
msgid "In function %qs:"
msgstr "在函式 %qs 中："

#: loop-iv.c:2709 tree-ssa-loop-niter.c:1109
msgid "assuming that the loop is not infinite"
msgstr "假定循環有窮"

#: loop-iv.c:2710 tree-ssa-loop-niter.c:1110
msgid "cannot optimize possibly infinite loops"
msgstr "無法最佳化可能無窮的循環"

#: loop-iv.c:2718 tree-ssa-loop-niter.c:1114
msgid "assuming that the loop counter does not overflow"
msgstr "假定循環計數不會溢出"

#: loop-iv.c:2719 tree-ssa-loop-niter.c:1115
msgid "cannot optimize loop, the loop counter may overflow"
msgstr "無法最佳化循環，循環變數可能溢出"

#. What to print when a switch has no documentation.
#: opts.c:90
msgid "This switch lacks documentation"
msgstr "此開關缺少可用文件"

#: opts.c:1227
#, c-format
msgid ""
"\n"
"Target specific options:\n"
msgstr ""
"\n"
"目標平臺特定的選項：\n"

#: opts.c:1248
msgid "The following options are language-independent:\n"
msgstr "下列選項是與具體語言無關的：\n"

#: opts.c:1255
#, c-format
msgid ""
"The %s front end recognizes the following options:\n"
"\n"
msgstr ""
"%s 前端程式可識別下列選項：\n"
"\n"

#: opts.c:1268
msgid "The --param option recognizes the following as parameters:\n"
msgstr "--param 選項可接受以下參數：\n"

#: protoize.c:583
#, c-format
msgid "%s: error writing file '%s': %s\n"
msgstr "%s：寫入檔案「%s」時發生錯誤：%s\n"

#: protoize.c:627
#, c-format
msgid "%s: usage '%s [ -VqfnkN ] [ -i <istring> ] [ filename ... ]'\n"
msgstr "%s：用法「%s [ -VqfnkN ] [ -i <字串> ] [ 檔案名稱 ... ]」\n"

#: protoize.c:630
#, c-format
msgid "%s: usage '%s [ -VqfnkNlgC ] [ -B <dirname> ] [ filename ... ]'\n"
msgstr "%s：用法「%s [ -VqfnkNlgC ] [ -B <目錄名> ] [ 檔案名稱 ... ]'\n"

#: protoize.c:731
#, c-format
msgid "%s: warning: no read access for file '%s'\n"
msgstr "%s：警告：沒有檔案「%s」的讀權限\n"

#: protoize.c:739
#, c-format
msgid "%s: warning: no write access for file '%s'\n"
msgstr "%s：警告：沒有檔案「%s」的寫權限\n"

#: protoize.c:747
#, c-format
msgid "%s: warning: no write access for dir containing '%s'\n"
msgstr "%s：警告：沒有對包含「%s」的目錄的寫權限\n"

#. Catch cases like /.. where we try to backup to a
#. point above the absolute root of the logical file
#. system.
#: protoize.c:1134
#, c-format
msgid "%s: invalid file name: %s\n"
msgstr "%s：無效的檔案名稱：%s\n"

#: protoize.c:1282
#, c-format
msgid "%s: %s: can't get status: %s\n"
msgstr "%s：%s：不能獲取狀態：%s\n"

#: protoize.c:1303
#, c-format
msgid ""
"\n"
"%s: fatal error: aux info file corrupted at line %d\n"
msgstr ""
"\n"
"%s：嚴重錯誤：輔助資訊檔案的第 %d 列已損壞\n"

#: protoize.c:1632
#, c-format
msgid "%s:%d: declaration of function '%s' takes different forms\n"
msgstr "%s：%d：函式「%s」的宣告形式不同\n"

#: protoize.c:1887
#, c-format
msgid "%s: compiling '%s'\n"
msgstr "%s：正在編譯「%s」\n"

#: protoize.c:1910
#, c-format
msgid "%s: wait: %s\n"
msgstr "%s：等待：%s\n"

#: protoize.c:1915
#, c-format
msgid "%s: subprocess got fatal signal %d\n"
msgstr "%s：子處理序收到致命信號 %d\n"

#: protoize.c:1923
#, c-format
msgid "%s: %s exited with status %d\n"
msgstr "%s：%s 以狀態碼 %d 離開\n"

#: protoize.c:1972
#, c-format
msgid "%s: warning: missing SYSCALLS file '%s'\n"
msgstr "%s：警告：缺少 SYSCALLS 檔案「%s」\n"

#: protoize.c:1981 protoize.c:2010
#, c-format
msgid "%s: can't read aux info file '%s': %s\n"
msgstr "%s：無法讀取輸助資訊檔案「%s」：%s\n"

#: protoize.c:2026 protoize.c:2054
#, c-format
msgid "%s: can't get status of aux info file '%s': %s\n"
msgstr "%s：不能獲取輔助資訊檔案「%s」的狀態：%s\n"

#: protoize.c:2082
#, c-format
msgid "%s: can't open aux info file '%s' for reading: %s\n"
msgstr "%s：無法開啟輔助資訊檔案「%s」以供讀出：%s\n"

#: protoize.c:2100
#, c-format
msgid "%s: error reading aux info file '%s': %s\n"
msgstr "%s：讀取輸助資訊檔案「%s」時發生錯誤：%s\n"

#: protoize.c:2113
#, c-format
msgid "%s: error closing aux info file '%s': %s\n"
msgstr "%s：關閉輸助資訊檔案「%s」時發生錯誤：%s\n"

#: protoize.c:2129
#, c-format
msgid "%s: can't delete aux info file '%s': %s\n"
msgstr "%s：無法刪除輸助資訊檔案「%s」：%s\n"

#: protoize.c:2211 protoize.c:4180
#, c-format
msgid "%s: can't delete file '%s': %s\n"
msgstr "%s：無法刪除檔案「%s」：%s\n"

#: protoize.c:2289
#, c-format
msgid "%s: warning: can't rename file '%s' to '%s': %s\n"
msgstr "%s：警告：不能將檔案「%s」重新命名為「%s」：%s\n"

#: protoize.c:2411
#, c-format
msgid "%s: conflicting extern definitions of '%s'\n"
msgstr "%s：「%s」有相互衝突的外部定義\n"

#: protoize.c:2415
#, c-format
msgid "%s: declarations of '%s' will not be converted\n"
msgstr "%s：「%s」的宣告不會被轉化\n"

#: protoize.c:2417
#, c-format
msgid "%s: conflict list for '%s' follows:\n"
msgstr "%s：「%s」的衝突清單如下：\n"

#: protoize.c:2450
#, c-format
msgid "%s: warning: using formals list from %s(%d) for function '%s'\n"
msgstr "%s：警告：使用來自 %s(%d)的參數清單，為函式「%s」\n"

#: protoize.c:2490
#, c-format
msgid "%s: %d: '%s' used but missing from SYSCALLS\n"
msgstr "%s：%d：用到「%s」但其並未出現在 SYSCALLS 中\n"

#: protoize.c:2496
#, c-format
msgid "%s: %d: warning: no extern definition for '%s'\n"
msgstr "%s：%d：警告：沒有「%s」的外部定義\n"

#: protoize.c:2526
#, c-format
msgid "%s: warning: no static definition for '%s' in file '%s'\n"
msgstr "%s：警告：沒有「%s」的靜態定義，在檔案「%s」中\n"

#: protoize.c:2532
#, c-format
msgid "%s: multiple static defs of '%s' in file '%s'\n"
msgstr "%s：「%s」在檔案「%s」中有多個靜態定義\n"

#: protoize.c:2702 protoize.c:2705
#, c-format
msgid "%s: %d: warning: source too confusing\n"
msgstr "%s：%d：警告：來源檔案不可理解\n"

#: protoize.c:2900
#, c-format
msgid "%s: %d: warning: varargs function declaration not converted\n"
msgstr "%s：%d：警告：可變參數函式宣告未被轉化\n"

#: protoize.c:2915
#, c-format
msgid "%s: declaration of function '%s' not converted\n"
msgstr "%s：函式「%s」的宣告不會被轉化\n"

#: protoize.c:3038
#, c-format
msgid "%s: warning: too many parameter lists in declaration of '%s'\n"
msgstr "%s：警告：「%s」的宣告中參數清單太多\n"

#: protoize.c:3059
#, c-format
msgid ""
"\n"
"%s: warning: too few parameter lists in declaration of '%s'\n"
msgstr ""
"\n"
"%s：警告：「%s」的宣告中參數清單太少\n"

#: protoize.c:3155
#, c-format
msgid "%s: %d: warning: found '%s' but expected '%s'\n"
msgstr "%s：%d：警告：發現「%s」但需要「%s」\n"

#: protoize.c:3330
#, c-format
msgid "%s: local declaration for function '%s' not inserted\n"
msgstr "%s：未插入函式「%s」的局部宣告\n"

#: protoize.c:3357
#, c-format
msgid ""
"\n"
"%s: %d: warning: can't add declaration of '%s' into macro call\n"
msgstr ""
"\n"
"%s：%d：警告：不能將「%s」的宣告加入到巨集呼叫中\n"

#: protoize.c:3429
#, c-format
msgid "%s: global declarations for file '%s' not inserted\n"
msgstr "%s：檔案「%s」的全域宣告未被插入\n"

#: protoize.c:3518 protoize.c:3548
#, c-format
msgid "%s: definition of function '%s' not converted\n"
msgstr "%s：函式「%s」的定義不會被轉化\n"

#: protoize.c:3537
#, c-format
msgid "%s: %d: warning: definition of %s not converted\n"
msgstr "%s：%d：警告：%s 的定義未被轉化\n"

#: protoize.c:3863
#, c-format
msgid "%s: found definition of '%s' at %s(%d)\n"
msgstr "%s：找到「%s」的定義，於 %s(%d)\n"

#. If we make it here, then we did not know about this
#. function definition.
#: protoize.c:3879
#, c-format
msgid "%s: %d: warning: '%s' excluded by preprocessing\n"
msgstr "%s：%d：警告：「%s」被預先處理所排除\n"

#: protoize.c:3882
#, c-format
msgid "%s: function definition not converted\n"
msgstr "%s：函式定義不會被轉化\n"

#: protoize.c:3940
#, c-format
msgid "%s: '%s' not converted\n"
msgstr "%s：「%s」未被轉換\n"

#: protoize.c:3948
#, c-format
msgid "%s: would convert file '%s'\n"
msgstr "%s：將要轉換檔案「%s」\n"

#: protoize.c:3951
#, c-format
msgid "%s: converting file '%s'\n"
msgstr "%s：轉化檔案「%s」\n"

#: protoize.c:3961
#, c-format
msgid "%s: can't get status for file '%s': %s\n"
msgstr "%s：不能獲取檔案「%s」的狀態：%s\n"

#: protoize.c:4003
#, c-format
msgid "%s: can't open file '%s' for reading: %s\n"
msgstr "%s：無法開啟檔案「%s」讀入：%s\n"

#: protoize.c:4018
#, c-format
msgid ""
"\n"
"%s: error reading input file '%s': %s\n"
msgstr ""
"\n"
"%s：讀取輸入檔案「%s」時發生錯誤：%s\n"

#: protoize.c:4052
#, c-format
msgid "%s: can't create/open clean file '%s': %s\n"
msgstr "%s：無法建立/開啟乾淨檔案「%s」：%s\n"

#: protoize.c:4157
#, c-format
msgid "%s: warning: file '%s' already saved in '%s'\n"
msgstr "%s：警告：檔案「%s」已被儲存在「%s」中\n"

#: protoize.c:4165
#, c-format
msgid "%s: can't link file '%s' to '%s': %s\n"
msgstr "%s：無法將檔案「%s」連結至檔案「%s」：%s\n"

#: protoize.c:4195
#, c-format
msgid "%s: can't create/open output file '%s': %s\n"
msgstr "%s：無法建立/開啟輸出檔案「%s」：%s\n"

#: protoize.c:4228
#, c-format
msgid "%s: can't change mode of file '%s': %s\n"
msgstr "%s：不能變更檔案「%s」的模式：%s\n"

#: protoize.c:4404
#, c-format
msgid "%s: cannot get working directory: %s\n"
msgstr "%s：無法得到工作目錄：%s\n"

#: protoize.c:4502
#, c-format
msgid "%s: input file names must have .c suffixes: %s\n"
msgstr "%s：輸入檔案名稱必須有 .c 字尾：%s\n"

#: reload.c:3738
msgid "unable to generate reloads for:"
msgstr "無法產生重新載入，為："

#: reload1.c:1901
msgid "this is the insn:"
msgstr "這是指令："

#. It's the compiler's fault.
#: reload1.c:5103
msgid "could not find a spill register"
msgstr "找不到可捨出的暫存器"

#. It's the compiler's fault.
#: reload1.c:6737
msgid "VOIDmode on an output"
msgstr "輸出有 VOIDmode"

#: reload1.c:7710
msgid "Failure trying to reload:"
msgstr "試圖重新載入時失敗："

#: rtl-error.c:128
msgid "unrecognizable insn:"
msgstr "無法辨識的指令："

#: rtl-error.c:130
msgid "insn does not satisfy its constraints:"
msgstr "指令不滿足其約束："

#: timevar.c:412
msgid ""
"\n"
"Execution times (seconds)\n"
msgstr ""
"\n"
"執行時間(以秒計)\n"

#. Print total time.
#: timevar.c:470
msgid " TOTAL                 :"
msgstr " 共計                  ："

#: timevar.c:499
#, c-format
msgid "time in %s: %ld.%06ld (%ld%%)\n"
msgstr "%s中耗時：%ld.%06ld (%ld%%)\n"

#: tlink.c:384
#, c-format
msgid "collect: reading %s\n"
msgstr "collect：讀入 %s\n"

#: tlink.c:478
#, c-format
msgid "removing .rpo file"
msgstr "刪除 .rpo 檔案"

#: tlink.c:480
#, c-format
msgid "renaming .rpo file"
msgstr "重新命名 .rpo 檔案"

#: tlink.c:534
#, c-format
msgid "collect: recompiling %s\n"
msgstr "collect：重新編譯 %s\n"

#: tlink.c:714
#, c-format
msgid "collect: tweaking %s in %s\n"
msgstr "collect：調整 %s，於 %s\n"

#: tlink.c:764
#, c-format
msgid "collect: relinking\n"
msgstr "collect：重新連結\n"

#: toplev.c:583
#, c-format
msgid "unrecoverable error"
msgstr "不可恢復錯誤"

#: toplev.c:1115
#, c-format
msgid ""
"%s%s%s version %s (%s)\n"
"%s\tcompiled by GNU C version %s.\n"
msgstr ""
"%s%s%s 版本 %s (%s)\n"
"%s\t由 GNU C 版本 %s 編譯。\n"

#: toplev.c:1117
#, c-format
msgid "%s%s%s version %s (%s) compiled by CC.\n"
msgstr "由 CC 編譯的 %s%s%s 版本 %s (%s)。\n"

#: toplev.c:1121
#, c-format
msgid "%s%sGGC heuristics: --param ggc-min-expand=%d --param ggc-min-heapsize=%d\n"
msgstr "%s%sGGC 準則：--param ggc-min-expand=%d --param ggc-min-heapsize=%d\n"

#: toplev.c:1183
msgid "options passed: "
msgstr "傳遞的選項："

#: toplev.c:1212
msgid "options enabled: "
msgstr "啟用的選項："

#: toplev.c:1331
#, c-format
msgid "created and used with differing settings of '%s'"
msgstr "建立和使用時使用了不同的「%s」設定"

#: toplev.c:1333
msgid "out of memory"
msgstr "記憶體不足"

#: toplev.c:1348
msgid "created and used with different settings of -fpic"
msgstr "建立和使用時使用了不同的 -fpic 設定"

#: toplev.c:1350
msgid "created and used with different settings of -fpie"
msgstr "建立和使用時使用了不同的 -fpie 設定"

#: tree-inline.c:2026
msgid "originally indirect function call not considered for inlining"
msgstr "原本間接的函式呼叫不被考慮內聯"

#.
#. Local variables:
#. mode:c
#. End:
#.
#: diagnostic.def:1
msgid "fatal error: "
msgstr "嚴重錯誤："

#: diagnostic.def:2
msgid "internal compiler error: "
msgstr "編譯器內部錯誤："

#: diagnostic.def:3
msgid "error: "
msgstr "錯誤："

#: diagnostic.def:4
msgid "sorry, unimplemented: "
msgstr "對不起，尚未實作："

#: diagnostic.def:5
msgid "warning: "
msgstr "警告："

#: diagnostic.def:6
msgid "anachronism: "
msgstr "時代錯誤："

#: diagnostic.def:7
msgid "note: "
msgstr "附註："

#: diagnostic.def:8
msgid "debug: "
msgstr "除錯："

#: params.def:48
msgid "The maximum number of fields in a structure variable without direct structure accesses that GCC will attempt to track separately"
msgstr "GCC 試圖分別追蹤的不存在直接結構存取的結構變數中的欄位的最大數目"

#: params.def:57
msgid "The maximum structure size (in bytes) for which GCC will use by-element copies"
msgstr "GCC 將為其考慮按元素複製的最大的結構大小(以位元組表示)"

#: params.def:66
msgid "The maximum number of structure fields for which GCC will use by-element copies"
msgstr "GCC 將為其考慮按元素複製的結構欄位最大數量"

#: params.def:78
msgid "The threshold ratio between instantiated fields and the total structure size"
msgstr "實體化的欄位和結構總大小之比的閾值"

#: params.def:95
msgid "The maximum number of instructions in a single function eligible for inlining"
msgstr "單一可內聯的函式體最多能包含的指令數"

#: params.def:107
msgid "The maximum number of instructions when automatically inlining"
msgstr "自動內聯時指令的最大數量"

#: params.def:112
msgid "The maximum number of instructions inline function can grow to via recursive inlining"
msgstr "由於巢狀內聯造成的內聯函式程式碼膨脹的上限值(指令數)"

#: params.def:117
msgid "The maximum number of instructions non-inline function can grow to via recursive inlining"
msgstr "由於巢狀內聯造成的非內聯函式程式碼膨脹的上限值(指令數)"

#: params.def:122
msgid "The maximum depth of recursive inlining for inline functions"
msgstr "內聯函式中巢狀內聯的最大深度"

#: params.def:127
msgid "The maximum depth of recursive inlining for non-inline functions"
msgstr "非內聯函式中巢狀內聯的最大深度"

#: params.def:132
msgid "Inline recursively only when the probability of call being executed exceeds the parameter"
msgstr "僅當被執行的呼叫的概率超過此參數時方進行遞迴地內聯"

#: params.def:139
msgid "If -fvariable-expansion-in-unroller is used, the maximum number of times that an individual variable will be expanded during loop unrolling"
msgstr "如果使用了 -fvariable-expansion-in-unroller，即指單一變數在循環展開時可以同時被展開的次數"

#: params.def:150
msgid "The maximum number of instructions to consider to fill a delay slot"
msgstr "考慮填充入延遲槽中的最大指令數"

#: params.def:161
msgid "The maximum number of instructions to consider to find accurate live register information"
msgstr "用以發現準確的作用中暫存器資訊的最大指令數量"

#: params.def:171
msgid "The maximum length of scheduling's pending operations list"
msgstr "調度候選作業清單的最大長度"

#: params.def:176
msgid "The size of function body to be considered large"
msgstr "超過這個大小的函式體被認為是大的"

#: params.def:180
msgid "Maximal growth due to inlining of large function (in percent)"
msgstr "內聯大函式造成的程式碼膨脹的上限(以百分數的形式給出)"

#: params.def:184
msgid "The size of translation unit to be considered large"
msgstr "超過這個大小的翻譯單元被認為是大的"

#: params.def:188
msgid "how much can given compilation unit grow because of the inlining (in percent)"
msgstr "給定的編譯單元因內聯造成的體積膨脹上限(以百分數表示)"

#: params.def:192
msgid "expense of call operation relative to ordinary arithmetic operations"
msgstr "呼叫作業相對於普通算術作業的代價"

#: params.def:199
msgid "The maximum amount of memory to be allocated by GCSE"
msgstr "GCSE 可指派的最大記憶體量"

#: params.def:204
msgid "The maximum number of passes to make when doing GCSE"
msgstr "進行 GCSE 的最多趟數"

#: params.def:214
msgid "The threshold ratio for performing partial redundancy elimination after reload"
msgstr "重新載入後進行部分冗餘消除的比例閾值"

#: params.def:221
msgid "The threshold ratio of critical edges execution count that permit performing redundancy elimination after reload"
msgstr "重新載入後允許進行冗餘消除的關鍵邊執行次數的比例閾值"

#: params.def:232
msgid "The maximum number of instructions to consider to unroll in a loop"
msgstr "單一循環中考慮展開的最大指令數"

#: params.def:238
msgid "The maximum number of instructions to consider to unroll in a loop on average"
msgstr "單一循環中考慮展開的平均最大指令數"

#: params.def:243
msgid "The maximum number of unrollings of a single loop"
msgstr "單一循環最多可以被展開的次數"

#: params.def:248
msgid "The maximum number of insns of a peeled loop"
msgstr "剝離後的循環所能有的最大指令數"

#: params.def:253
msgid "The maximum number of peelings of a single loop"
msgstr "單一循環最大的剝離數"

#: params.def:258
msgid "The maximum number of insns of a completely peeled loop"
msgstr "一個完全剝離的循環所能有的最大指令數"

#: params.def:263
msgid "The maximum number of peelings of a single loop that is peeled completely"
msgstr "一個完全剝離的單一循環最大的剝離數"

#: params.def:268
msgid "The maximum number of insns of a peeled loop that rolls only once"
msgstr "被剝離後只捲繞一次的循環包含的最多指令數"

#: params.def:274
msgid "The maximum number of insns of an unswitched loop"
msgstr "去開關後的循環所能有的最大指令數"

#: params.def:279
msgid "The maximum number of unswitchings in a single loop"
msgstr "單一循環中考慮去開關的最大指令數"

#: params.def:286
msgid "Bound on the number of iterations the brute force # of iterations analysis algorithm evaluates"
msgstr ""

#: params.def:291
msgid "Maximum number of loops to perform swing modulo scheduling on (mainly for debugging)"
msgstr ""

#: params.def:297
msgid "A factor for tuning the upper bound that swing modulo scheduler uses for scheduling a loop"
msgstr ""

#: params.def:301
msgid "The number of cycles the swing modulo scheduler considers when checking conflicts using DFA"
msgstr ""

#: params.def:305
msgid "A threshold on the average loop count considered by the swing modulo scheduler"
msgstr ""

#: params.def:310
msgid "Select fraction of the maximal count of repetitions of basic block in program given basic block needs to have to be considered hot"
msgstr ""

#: params.def:314
msgid "Select fraction of the maximal frequency of executions of basic block in function given basic block needs to have to be considered hot"
msgstr ""

#: params.def:330
msgid "The maximum number of loop iterations we predict statically"
msgstr "靜態預測時的最多循環次數"

#: params.def:334
msgid "The percentage of function, weighted by execution frequency, that must be covered by trace formation. Used when profile feedback is available"
msgstr "必須被蹤跡形成所覆寫的函式百分比，以執行頻率加權。當取樣反饋可用時使用"

#: params.def:338
msgid "The percentage of function, weighted by execution frequency, that must be covered by trace formation. Used when profile feedback is not available"
msgstr "必須被蹤跡形成所覆寫的函式百分比，以執行頻率加權。當取樣反饋無法使用時使用"

#: params.def:342
msgid "Maximal code growth caused by tail duplication (in percent)"
msgstr ""

#: params.def:346
msgid "Stop reverse growth if the reverse probability of best edge is less than this threshold (in percent)"
msgstr "當最優邊的反向概率小於此閾值(以百分數表示)時停止反向增長"

#: params.def:350
msgid "Stop forward growth if the probability of best edge is less than this threshold (in percent). Used when profile feedback is available"
msgstr "當最優邊的概率小於此限值(以百分數表示)時，停止前向增長。當取樣反饋可用時使用。"

#: params.def:354
msgid "Stop forward growth if the probability of best edge is less than this threshold (in percent). Used when profile feedback is not available"
msgstr "當最優邊的概率小於此限值(以百分數表示)時，停止前向增長。當取樣反饋無法使用時使用。"

#: params.def:360
msgid "The maximum number of incoming edges to consider for crossjumping"
msgstr "考慮進行交叉跳轉的最大入邊數量"

#: params.def:366
msgid "The minimum number of matching instructions to consider for crossjumping"
msgstr "考慮進行交叉跳轉的最小匹配指令數量"

#: params.def:372
msgid "The maximum expansion factor when copying basic blocks"
msgstr "複製基本區塊時最大的展開因子"

#: params.def:378
msgid "The maximum number of insns to duplicate when unfactoring computed gotos"
msgstr ""

#: params.def:384
msgid "The maximum length of path considered in cse"
msgstr "公因式消去時考慮的最大路徑長度"

#: params.def:388
msgid "The maximum instructions CSE process before flushing"
msgstr ""

#: params.def:395
msgid "The minimum cost of an expensive expression in the loop invariant motion"
msgstr ""

#: params.def:404
msgid "Bound on number of candidates below that all candidates are considered in iv optimizations"
msgstr ""

#: params.def:412
msgid "Bound on number of iv uses in loop optimized in iv optimizations"
msgstr ""

#: params.def:420
msgid "If number of candidates in the set is smaller, we always try to remove unused ivs during its optimization"
msgstr ""

#: params.def:425
msgid "Bound on size of expressions used in the scalar evolutions analyzer"
msgstr ""

#: params.def:430
msgid "Bound on number of runtime checks inserted by the vectorizer's loop versioning"
msgstr ""

#: params.def:437
msgid "Given N calls and V call-clobbered vars in a function.  Use .GLOBAL_VAR if NxV is larger than this limit"
msgstr ""

#: params.def:442
msgid "The maximum memory locations recorded by cselib"
msgstr "cselib 可指派的最大記憶體量"

#: params.def:446
msgid "The maximum memory locations recorded by flow"
msgstr "flow 可指派的最大記憶體量"

#: params.def:459
msgid "Minimum heap expansion to trigger garbage collection, as a percentage of the total size of the heap"
msgstr "引發無用收集的堆展開的最小值，以占堆總大小的百分比給出"

#: params.def:464
msgid "Minimum heap size before we start collecting garbage, in kilobytes"
msgstr "開始無用回收時最小的堆大小，以千位元組表示"

#: params.def:472
msgid "The maximum number of instructions to search backward when looking for equivalent reload"
msgstr "後向搜尋以尋找等價多載入時要搜尋的最大指令數量"

#: params.def:477
msgid "The maximum number of virtual operands allowed to represent aliases before triggering alias grouping"
msgstr ""

#: params.def:482
msgid "The maximum number of blocks in a region to be considered for interblock scheduling"
msgstr "一個區域中考慮進行塊間調度的最大塊數"

#: params.def:487
msgid "The maximum number of insns in a region to be considered for interblock scheduling"
msgstr "一個區域中考慮進行塊間調度的最大指令數"

#: params.def:492
msgid "The minimum probability of reaching a source block for interblock speculative scheduling"
msgstr "區塊間預測調度時到達一個來源塊的最小概率"

#: params.def:497
msgid "The maximum number of RTL nodes that can be recorded as combiner's last value"
msgstr ""

#: params.def:505
msgid "The upper bound for sharing integer constants"
msgstr "共享整型常數的上界"

#: params.def:524
msgid "Minimum number of virtual mappings to consider switching to full virtual renames"
msgstr "考慮切換到完整虛擬更名的最小虛擬映射數"

#: params.def:529
msgid "Ratio between virtual mappings and virtual symbols to do full virtual renames"
msgstr ""

#: params.def:534
msgid "The lower bound for a buffer to be considered for stack smashing protection"
msgstr ""

#: params.def:552
msgid "Maximum number of statements allowed in a block that needs to be duplicated when threading jumps"
msgstr ""

#: params.def:561
msgid "Maximum number of fields in a structure before pointer analysis treats the structure as a single variable"
msgstr "在指標分析之前的結構變數中欄位的最大數目，將該結構視為單一變數"

#: config/alpha/alpha.c:5087
#, c-format
msgid "invalid %%H value"
msgstr "無效 %%H 值"

#: config/alpha/alpha.c:5108 config/bfin/bfin.c:1191
#, c-format
msgid "invalid %%J value"
msgstr "無效 %%J 值"

#: config/alpha/alpha.c:5138 config/ia64/ia64.c:4603
#, c-format
msgid "invalid %%r value"
msgstr "無效 %%r 值"

#: config/alpha/alpha.c:5148 config/rs6000/rs6000.c:10433
#: config/xtensa/xtensa.c:1691
#, c-format
msgid "invalid %%R value"
msgstr "無效 %%R 值"

#: config/alpha/alpha.c:5154 config/rs6000/rs6000.c:10352
#: config/xtensa/xtensa.c:1658
#, c-format
msgid "invalid %%N value"
msgstr "無效 %%N 值"

#: config/alpha/alpha.c:5162 config/rs6000/rs6000.c:10380
#, c-format
msgid "invalid %%P value"
msgstr "無效 %%P 值"

#: config/alpha/alpha.c:5170
#, c-format
msgid "invalid %%h value"
msgstr "無效 %%h 值"

#: config/alpha/alpha.c:5178 config/xtensa/xtensa.c:1684
#, c-format
msgid "invalid %%L value"
msgstr "無效 %%L 值"

#: config/alpha/alpha.c:5217 config/rs6000/rs6000.c:10334
#, c-format
msgid "invalid %%m value"
msgstr "無效 %%m 值"

#: config/alpha/alpha.c:5225 config/rs6000/rs6000.c:10342
#, c-format
msgid "invalid %%M value"
msgstr "無效 %%M 值"

#: config/alpha/alpha.c:5269
#, c-format
msgid "invalid %%U value"
msgstr "無效 %%U 值"

#: config/alpha/alpha.c:5281 config/alpha/alpha.c:5295
#: config/rs6000/rs6000.c:10441
#, c-format
msgid "invalid %%s value"
msgstr "無效 %%s 值"

#: config/alpha/alpha.c:5318
#, c-format
msgid "invalid %%C value"
msgstr "無效 %%C 值"

#: config/alpha/alpha.c:5355 config/rs6000/rs6000.c:10173
#: config/rs6000/rs6000.c:10191
#, c-format
msgid "invalid %%E value"
msgstr "無效 %%E 值"

#: config/alpha/alpha.c:5380 config/alpha/alpha.c:5428
#, c-format
msgid "unknown relocation unspec"
msgstr "不明的不可預期重定位"

#: config/alpha/alpha.c:5389 config/crx/crx.c:1082
#: config/rs6000/rs6000.c:10755
#, c-format
msgid "invalid %%xn code"
msgstr "無效的 %%xn 程式碼"

#: config/arc/arc.c:1726 config/m32r/m32r.c:1805
#, c-format
msgid "invalid operand to %%R code"
msgstr "%%R 程式碼的運算元無效"

#: config/arc/arc.c:1758 config/m32r/m32r.c:1828
#, c-format
msgid "invalid operand to %%H/%%L code"
msgstr "%%H/%%L 程式碼的運算元無效"

#: config/arc/arc.c:1780 config/m32r/m32r.c:1899
#, c-format
msgid "invalid operand to %%U code"
msgstr "%%U 程式碼的運算元無效"

#: config/arc/arc.c:1791
#, c-format
msgid "invalid operand to %%V code"
msgstr "%%V 程式碼的運算元無效"

#. Unknown flag.
#. Undocumented flag.
#: config/arc/arc.c:1798 config/m32r/m32r.c:1926 config/sparc/sparc.c:6818
#, c-format
msgid "invalid operand output code"
msgstr "無效的運算元輸出程式碼"

#: config/arm/arm.c:10913 config/arm/arm.c:10931
#, c-format
msgid "predicated Thumb instruction"
msgstr "預測到的 Thumb 指令"

#: config/arm/arm.c:10919
#, c-format
msgid "predicated instruction in conditional sequence"
msgstr "在條件序列中預測到的指令"

#: config/arm/arm.c:11027 config/arm/arm.c:11037 config/arm/arm.c:11047
#: config/arm/arm.c:11073 config/arm/arm.c:11091 config/arm/arm.c:11126
#: config/arm/arm.c:11145 config/arm/arm.c:11160 config/arm/arm.c:11186
#: config/arm/arm.c:11193 config/arm/arm.c:11200
#, c-format
msgid "invalid operand for code '%c'"
msgstr "程式碼「%c」的運算元無效"

#: config/arm/arm.c:11086
#, c-format
msgid "instruction never exectued"
msgstr "指令永遠不被執行"

#: config/arm/arm.c:11211
#, c-format
msgid "missing operand"
msgstr "缺少運算元"

#: config/avr/avr.c:1116
msgid "bad address, not (reg+disp):"
msgstr "位址錯誤，不是(reg+disp)："

#: config/avr/avr.c:1123
msgid "bad address, not post_inc or pre_dec:"
msgstr "錯誤的位址，不是 post_inc 或 pre_dec:"

#: config/avr/avr.c:1134
msgid "internal compiler error.  Bad address:"
msgstr "編譯器內部錯誤。錯誤的位址："

#: config/avr/avr.c:1147
msgid "internal compiler error.  Unknown mode:"
msgstr "編譯器內部錯誤。不明的模式："

#: config/avr/avr.c:1770 config/avr/avr.c:2453
msgid "invalid insn:"
msgstr "無效指令："

#: config/avr/avr.c:1804 config/avr/avr.c:1890 config/avr/avr.c:1939
#: config/avr/avr.c:1967 config/avr/avr.c:2062 config/avr/avr.c:2231
#: config/avr/avr.c:2487 config/avr/avr.c:2599
msgid "incorrect insn:"
msgstr "錯誤指令："

#: config/avr/avr.c:1986 config/avr/avr.c:2147 config/avr/avr.c:2302
#: config/avr/avr.c:2665
msgid "unknown move insn:"
msgstr "無效的 move 指令："

#: config/avr/avr.c:2895
msgid "bad shift insn:"
msgstr "錯誤的 shift 指令"

#: config/avr/avr.c:3011 config/avr/avr.c:3459 config/avr/avr.c:3845
msgid "internal compiler error.  Incorrect shift:"
msgstr "編譯器內部錯誤。不正確的移位量："

#: config/bfin/bfin.c:1153
#, c-format
msgid "invalid %%j value"
msgstr "無效的 %%j 值"

#: config/bfin/bfin.c:1270
#, c-format
msgid "invalid const_double operand"
msgstr "無效的 const_double 運算元"

#: config/c4x/c4x.c:1584
msgid "using CONST_DOUBLE for address"
msgstr "為位址使用 CONST_DOUBLE"

#: config/c4x/c4x.c:1722
msgid "c4x_address_cost: Invalid addressing mode"
msgstr "c4x_address_cost：無效的定址模式"

#: config/c4x/c4x.c:1857
#, c-format
msgid "c4x_print_operand: %%L inconsistency"
msgstr "c4x_print_operand：%%L 不一致"

#: config/c4x/c4x.c:1863
#, c-format
msgid "c4x_print_operand: %%N inconsistency"
msgstr "c4x_print_operand：%%N 不一致"

#: config/c4x/c4x.c:1904
#, c-format
msgid "c4x_print_operand: %%O inconsistency"
msgstr "c4x_print_operand：%%O 不一致"

#: config/c4x/c4x.c:1999
msgid "c4x_print_operand: Bad operand case"
msgstr "c4x_print_operand：錯誤的運算元類型"

#: config/c4x/c4x.c:2040
msgid "c4x_print_operand_address: Bad post_modify"
msgstr "c4x_print_operand_address：錯誤的後變更"

#: config/c4x/c4x.c:2062
msgid "c4x_print_operand_address: Bad pre_modify"
msgstr "c4x_print_operand_address：錯誤的前變更"

#: config/c4x/c4x.c:2110 config/c4x/c4x.c:2122 config/c4x/c4x.c:2137
msgid "c4x_print_operand_address: Bad operand case"
msgstr "c4x_print_operand_address：錯誤的運算元類型"

#: config/c4x/c4x.c:2388
msgid "c4x_rptb_insert: Cannot find start label"
msgstr "c4x_rptb_insert：找不到起始標籤"

#: config/c4x/c4x.c:2990
msgid "invalid indirect memory address"
msgstr "無效的間接記憶體位址"

#: config/c4x/c4x.c:3079
msgid "invalid indirect (S) memory address"
msgstr "無效的間接(S)記憶體位址"

#: config/c4x/c4x.c:3414
msgid "c4x_valid_operands: Internal error"
msgstr "c4x_valid_operands：內部錯誤"

#: config/c4x/c4x.c:3853
msgid "c4x_operand_subword: invalid mode"
msgstr "c4x_operand_subword：無效模式"

#: config/c4x/c4x.c:3856
msgid "c4x_operand_subword: invalid operand"
msgstr "c4x_operand_subword：無效運算元"

#. We could handle these with some difficulty.
#. e.g., *p-- => *(p-=2); *(p+1).
#: config/c4x/c4x.c:3882
msgid "c4x_operand_subword: invalid autoincrement"
msgstr "c4x_operand_subword：無效的自差異"

#: config/c4x/c4x.c:3888
msgid "c4x_operand_subword: invalid address"
msgstr "c4x_operand_subword：無效位址"

#: config/c4x/c4x.c:3899
msgid "c4x_operand_subword: address not offsettable"
msgstr "c4x_operand_subword：無法取偏移量的位址"

#: config/c4x/c4x.c:4101
msgid "c4x_rptb_rpts_p: Repeat block top label moved"
msgstr "c4x_rptb_rpts_p：重複塊的頂層標籤被移動"

#. Use `%s' to print the string in case there are any escape
#. characters in the message.
#: config/cris/cris.c:492 fortran/dump-parse-tree.c:84
#: fortran/dump-parse-tree.c:416 fortran/dump-parse-tree.c:747 c-typeck.c:4350
#: c-typeck.c:4365 c-typeck.c:4380 final.c:2833 final.c:2835 gcc.c:4664
#: loop-iv.c:2711 loop-iv.c:2720 rtl-error.c:113 toplev.c:587
#: tree-ssa-loop-niter.c:1120 cp/parser.c:1972 cp/typeck.c:4291
#: java/expr.c:406
#, gcc-internal-format
msgid "%s"
msgstr "%s"

#: config/cris/cris.c:544
msgid "unexpected index-type in cris_print_index"
msgstr "cris_print_index 中有非預期的索引類型"

#: config/cris/cris.c:558
msgid "unexpected base-type in cris_print_base"
msgstr "cris_print_base 中有非預期的基礎類別型"

#: config/cris/cris.c:674
msgid "invalid operand for 'b' modifier"
msgstr "「b」修飾符的運算元無效"

#: config/cris/cris.c:691
msgid "invalid operand for 'o' modifier"
msgstr "「o」修飾符的運算元無效"

#: config/cris/cris.c:710
msgid "invalid operand for 'O' modifier"
msgstr "「O」修飾符的運算元無效"

#: config/cris/cris.c:743
msgid "invalid operand for 'p' modifier"
msgstr "「p」修飾符的運算元無效"

#: config/cris/cris.c:782
msgid "invalid operand for 'z' modifier"
msgstr "「z」修飾符的運算元無效"

#: config/cris/cris.c:836 config/cris/cris.c:866
msgid "invalid operand for 'H' modifier"
msgstr "「H」修飾符的運算元無效"

#: config/cris/cris.c:842
msgid "bad register"
msgstr "錯誤的暫存器名"

#: config/cris/cris.c:887
msgid "invalid operand for 'e' modifier"
msgstr "「e」修飾符的運算元無效"

#: config/cris/cris.c:904
msgid "invalid operand for 'm' modifier"
msgstr "「m」修飾符的運算元無效"

#: config/cris/cris.c:929
msgid "invalid operand for 'A' modifier"
msgstr "「A」修飾符的運算元無效"

#: config/cris/cris.c:952
msgid "invalid operand for 'D' modifier"
msgstr "「D」修飾符的運算元無效"

#: config/cris/cris.c:966
msgid "invalid operand for 'T' modifier"
msgstr "「T」修飾符的運算元無效"

#: config/cris/cris.c:975
msgid "invalid operand modifier letter"
msgstr "無效的運算元修飾符字母"

#: config/cris/cris.c:1032
msgid "unexpected multiplicative operand"
msgstr "無效的乘性運算元"

#: config/cris/cris.c:1052
msgid "unexpected operand"
msgstr "非預期的運算元"

#: config/cris/cris.c:1085 config/cris/cris.c:1095
msgid "unrecognized address"
msgstr "無法辨識的位址"

#: config/cris/cris.c:2021
msgid "unrecognized supposed constant"
msgstr "預期的常數無法識別"

#: config/cris/cris.c:2396 config/cris/cris.c:2460
msgid "unexpected side-effects in address"
msgstr "位址中有非預期的副作用"

#. Can't possibly get a GOT-needing-fixup for a function-call,
#. right?
#: config/cris/cris.c:3254
msgid "Unidentifiable call op"
msgstr "無法辨識的 call 作業"

#: config/cris/cris.c:3305
#, c-format
msgid "PIC register isn't set up"
msgstr "尚未設定好 PIC 暫存器"

#: config/fr30/fr30.c:464
#, c-format
msgid "fr30_print_operand_address: unhandled address"
msgstr "fr30_print_operand：未處理的指標"

#: config/fr30/fr30.c:488
#, c-format
msgid "fr30_print_operand: unrecognized %%p code"
msgstr "fr30_print_operand：無法辨識的 %%p 程式碼"

#: config/fr30/fr30.c:508
#, c-format
msgid "fr30_print_operand: unrecognized %%b code"
msgstr "fr30_print_operand：無法辨識的 %%b 程式碼"

#: config/fr30/fr30.c:529
#, c-format
msgid "fr30_print_operand: unrecognized %%B code"
msgstr "fr30_print_operand：無法辨識的 %%B 程式碼"

#: config/fr30/fr30.c:537
#, c-format
msgid "fr30_print_operand: invalid operand to %%A code"
msgstr "fr30_print_operand：%%A 程式碼運算元無效"

#: config/fr30/fr30.c:554
#, c-format
msgid "fr30_print_operand: invalid %%x code"
msgstr "fr30_print_operand：無效的 %%x 程式碼"

#: config/fr30/fr30.c:561
#, c-format
msgid "fr30_print_operand: invalid %%F code"
msgstr "fr30_print_operand：無效的 %%F 程式碼"

#: config/fr30/fr30.c:578
#, c-format
msgid "fr30_print_operand: unknown code"
msgstr "fr30_print_operand：不明程式碼"

#: config/fr30/fr30.c:606 config/fr30/fr30.c:615 config/fr30/fr30.c:626
#: config/fr30/fr30.c:639
#, c-format
msgid "fr30_print_operand: unhandled MEM"
msgstr "fr30_print_operand：未處理的 MEM"

#: config/frv/frv.c:2541
msgid "bad insn to frv_print_operand_address:"
msgstr "給 frv_print_operand_address 錯誤的指令："

#: config/frv/frv.c:2552
msgid "bad register to frv_print_operand_memory_reference_reg:"
msgstr "給 frv_print_operand_memory_reference_reg 錯誤的暫存器："

#: config/frv/frv.c:2591 config/frv/frv.c:2601 config/frv/frv.c:2610
#: config/frv/frv.c:2631 config/frv/frv.c:2636
msgid "bad insn to frv_print_operand_memory_reference:"
msgstr "給 frv_print_operand_memory_reference 錯誤的指令："

#: config/frv/frv.c:2722
#, c-format
msgid "bad condition code"
msgstr "錯誤的條件碼"

#: config/frv/frv.c:2797
msgid "bad insn in frv_print_operand, bad const_double"
msgstr "frv_print_operand 中不正確誤指令，錯誤的 const_double"

#: config/frv/frv.c:2858
msgid "bad insn to frv_print_operand, 'e' modifier:"
msgstr "給 frv_print_operand 錯誤的指令，「e」修飾符："

#: config/frv/frv.c:2866
msgid "bad insn to frv_print_operand, 'F' modifier:"
msgstr "給 frv_print_operand 錯誤的指令，「F」修飾符："

#: config/frv/frv.c:2882
msgid "bad insn to frv_print_operand, 'f' modifier:"
msgstr "給 frv_print_operand 錯誤的指令，「f」修飾符："

#: config/frv/frv.c:2896
msgid "bad insn to frv_print_operand, 'g' modifier:"
msgstr "給 frv_print_operand 錯誤的指令，「g」修飾符："

#: config/frv/frv.c:2944
msgid "bad insn to frv_print_operand, 'L' modifier:"
msgstr "給 frv_print_operand 錯誤的指令，「L」修飾符："

#: config/frv/frv.c:2957
msgid "bad insn to frv_print_operand, 'M/N' modifier:"
msgstr "給 frv_print_operand 錯誤的指令，「M/N」修飾符："

#: config/frv/frv.c:2978
msgid "bad insn to frv_print_operand, 'O' modifier:"
msgstr "給 frv_print_operand 錯誤的指令，「O」修飾符："

#: config/frv/frv.c:2996
msgid "bad insn to frv_print_operand, P modifier:"
msgstr "給 frv_print_operand 錯誤的指令，P 修飾符："

#: config/frv/frv.c:3016
msgid "bad insn in frv_print_operand, z case"
msgstr "frv_print_operand 中不正確誤指令，z case"

#: config/frv/frv.c:3047
msgid "bad insn in frv_print_operand, 0 case"
msgstr "frv_print_operand 中不正確誤指令，0 case"

#: config/frv/frv.c:3052
msgid "frv_print_operand: unknown code"
msgstr "frv_print_operand：不明程式碼"

#: config/frv/frv.c:4421
msgid "bad output_move_single operand"
msgstr "錯誤的 output_move_single 運算元"

#: config/frv/frv.c:4548
msgid "bad output_move_double operand"
msgstr "錯誤的 output_move_double 運算元"

#: config/frv/frv.c:4690
msgid "bad output_condmove_single operand"
msgstr "錯誤的 output_condmove_single 運算元"

#. This macro is a C statement to print on `stderr' a string describing the
#. particular machine description choice.  Every machine description should
#. define `TARGET_VERSION'.  For example:
#.
#. #ifdef MOTOROLA
#. #define TARGET_VERSION           fprintf (stderr, " (68k, Motorola syntax)");
#. #else
#. #define TARGET_VERSION           fprintf (stderr, " (68k, MIT syntax)");
#. #endif
#: config/frv/frv.h:329
#, c-format
msgid " (frv)"
msgstr " (frv)"

#: config/i386/i386.c:6712
#, c-format
msgid "invalid UNSPEC as operand"
msgstr "無效的 UNSPEC 做為運算元"

#: config/i386/i386.c:7294
#, c-format
msgid "operand is neither a constant nor a condition code, invalid operand code 'c'"
msgstr "運算元既不是一個常數也不是一個條件碼，無效的運算元程式碼「c」"

#: config/i386/i386.c:7347
#, c-format
msgid "invalid operand code '%c'"
msgstr "無效的運算元程式碼「%c」"

#: config/i386/i386.c:7390
#, c-format
msgid "invalid constraints for operand"
msgstr "運算元的約束無效"

#: config/i386/i386.c:12984
msgid "unknown insn mode"
msgstr "不明的指令模式"

#. If the environment variable DJDIR is not defined, then DJGPP is not        installed correctly and GCC will quickly become confused with the        default prefix settings. Report the problem now so the user doesn't        receive deceptive "file not found" error messages later.
#. DJDIR is automatically defined by the DJGPP environment config            file pointed to by the environment variable DJGPP. Examine DJGPP            to try and figure out what's wrong.
#: config/i386/xm-djgpp.h:62
#, c-format
msgid "environment variable DJGPP not defined"
msgstr "沒有定義 DJGPP 環境變數"

#: config/i386/xm-djgpp.h:64
#, c-format
msgid "environment variable DJGPP points to missing file '%s'"
msgstr "環境變數 DJGPP 參照的檔案「%s」不存在"

#: config/i386/xm-djgpp.h:67
#, c-format
msgid "environment variable DJGPP points to corrupt file '%s'"
msgstr "環境變數 DJGPP 參照的檔案「%s」已損壞"

#: config/ia64/ia64.c:4653
#, c-format
msgid "ia64_print_operand: unknown code"
msgstr "ia64_print_operand：不明程式碼"

#: config/ia64/ia64.c:9013
msgid "invalid conversion from %<__fpreg%>"
msgstr "從 %<__fpreg%> 的轉換無效"

#: config/ia64/ia64.c:9016
msgid "invalid conversion to %<__fpreg%>"
msgstr "向 %<__fpreg%> 的轉換無效"

#: config/ia64/ia64.c:9029 config/ia64/ia64.c:9040
msgid "invalid operation on %<__fpreg%>"
msgstr "對 %<__fpreg%> 的作業無效"

#: config/iq2000/iq2000.c:3125
#, c-format
msgid "invalid %%P operand"
msgstr "無效的 %%P 運算元"

#: config/iq2000/iq2000.c:3133 config/rs6000/rs6000.c:10370
#, c-format
msgid "invalid %%p value"
msgstr "無效的 %%p 值"

#: config/iq2000/iq2000.c:3189 config/mips/mips.c:5535
#, c-format
msgid "invalid use of %%d, %%x, or %%X"
msgstr "對 %%d、%%x 或 %%X 的無效使用"

#: config/m32r/m32r.c:1775
#, c-format
msgid "invalid operand to %%s code"
msgstr "%%s 程式碼的運算元無效"

#: config/m32r/m32r.c:1782
#, c-format
msgid "invalid operand to %%p code"
msgstr "%%p 程式碼的運算元無效"

#: config/m32r/m32r.c:1837
msgid "bad insn for 'A'"
msgstr "「A」的指令錯誤"

#: config/m32r/m32r.c:1884
#, c-format
msgid "invalid operand to %%T/%%B code"
msgstr "%%T/%%B 程式碼的運算元無效"

#: config/m32r/m32r.c:1907
#, c-format
msgid "invalid operand to %%N code"
msgstr "%%N 程式碼的運算元無效"

#: config/m32r/m32r.c:1940
msgid "pre-increment address is not a register"
msgstr "前自增位址不是一個暫存器"

#: config/m32r/m32r.c:1947
msgid "pre-decrement address is not a register"
msgstr "前自減位址不是一個暫存器"

#: config/m32r/m32r.c:1954
msgid "post-increment address is not a register"
msgstr "後自增位址不是一個暫存器"

#: config/m32r/m32r.c:2030 config/m32r/m32r.c:2044
#: config/rs6000/rs6000.c:17606
msgid "bad address"
msgstr "錯誤位址"

#: config/m32r/m32r.c:2049
msgid "lo_sum not of register"
msgstr "lo_sum 不是暫存器"

#. !!!! SCz wrong here.
#: config/m68hc11/m68hc11.c:3189 config/m68hc11/m68hc11.c:3567
msgid "move insn not handled"
msgstr "未處理 move 指令"

#: config/m68hc11/m68hc11.c:3413 config/m68hc11/m68hc11.c:3497
#: config/m68hc11/m68hc11.c:3770
msgid "invalid register in the move instruction"
msgstr "move 指令中出現無效暫存器"

#: config/m68hc11/m68hc11.c:3447
msgid "invalid operand in the instruction"
msgstr "此指令中運算元無效"

#: config/m68hc11/m68hc11.c:3744
msgid "invalid register in the instruction"
msgstr "此指令中暫存器無效"

#: config/m68hc11/m68hc11.c:3777
msgid "operand 1 must be a hard register"
msgstr "運算元 1 必須是一個硬體暫存器"

#: config/m68hc11/m68hc11.c:3791
msgid "invalid rotate insn"
msgstr "無效的循環移位指令"

#: config/m68hc11/m68hc11.c:4215
msgid "registers IX, IY and Z used in the same INSN"
msgstr "在相同指令中使用暫存器 IX、IY 和 Z"

#: config/m68hc11/m68hc11.c:4552 config/m68hc11/m68hc11.c:4852
msgid "cannot do z-register replacement"
msgstr "無法完成 z 暫存器替換"

#: config/m68hc11/m68hc11.c:4915
msgid "invalid Z register replacement for insn"
msgstr "無效的 Z 暫存器替換"

#: config/mips/mips.c:5203
msgid "mips_debugger_offset called with non stack/frame/arg pointer"
msgstr ""

#: config/mips/mips.c:5413
#, c-format
msgid "PRINT_OPERAND, invalid insn for %%C"
msgstr "PRINT_OPERAND，%%C 的指令無效"

#: config/mips/mips.c:5430
#, c-format
msgid "PRINT_OPERAND, invalid insn for %%N"
msgstr "PRINT_OPERAND，%%N 的指令無效"

#: config/mips/mips.c:5439
#, c-format
msgid "PRINT_OPERAND, invalid insn for %%F"
msgstr "PRINT_OPERAND，%%F 的指令無效"

#: config/mips/mips.c:5448
#, c-format
msgid "PRINT_OPERAND, invalid insn for %%W"
msgstr "PRINT_OPERAND，%%W 的指令無效"

#: config/mips/mips.c:5469
#, c-format
msgid "invalid %%Y value"
msgstr "無效的 %%Y 值"

#: config/mips/mips.c:5486 config/mips/mips.c:5494
#, c-format
msgid "PRINT_OPERAND, invalid insn for %%q"
msgstr "PRINT_OPERAND，%%q 指令無效"

#: config/mips/mips.c:5563
msgid "PRINT_OPERAND, invalid operand for relocation"
msgstr "PRINT_OPERAND，重定位的運算元無效"

#: config/mmix/mmix.c:1468 config/mmix/mmix.c:1598
msgid "MMIX Internal: Expected a CONST_INT, not this"
msgstr "MMIX 內部錯誤：預期的是 CONST_INT，不是這個"

#: config/mmix/mmix.c:1547
msgid "MMIX Internal: Bad value for 'm', not a CONST_INT"
msgstr "MMIX 內部錯誤：「m」值錯誤，不是一個 CONST_INT"

#: config/mmix/mmix.c:1566
msgid "MMIX Internal: Expected a register, not this"
msgstr "MMIX 內部錯誤：需要一個暫存器，不是這個"

#: config/mmix/mmix.c:1576
msgid "MMIX Internal: Expected a constant, not this"
msgstr "MMIX 內部錯誤：需要一個常數，不是這個"

#. We need the original here.
#: config/mmix/mmix.c:1660
msgid "MMIX Internal: Cannot decode this operand"
msgstr "MMIX 內部錯誤：無法解碼此運算元"

#: config/mmix/mmix.c:1717
msgid "MMIX Internal: This is not a recognized address"
msgstr "MMIX 內部錯誤：這不是一個可辨識的位址"

#: config/mmix/mmix.c:2650
msgid "MMIX Internal: Trying to output invalidly reversed condition:"
msgstr "MMIX 內部錯誤：試圖輸出無效地反轉的條件："

#: config/mmix/mmix.c:2657
msgid "MMIX Internal: What's the CC of this?"
msgstr "MMIX 內部錯誤：它的比較條件是什麼？"

#: config/mmix/mmix.c:2661
msgid "MMIX Internal: What is the CC of this?"
msgstr "MMIX 內部錯誤：它的比較條件是什麼？"

#: config/mmix/mmix.c:2725
msgid "MMIX Internal: This is not a constant:"
msgstr "MMIX 內部錯誤：這不是一個常數："

#: config/mt/mt.c:298
msgid "mt_final_prescan_insn, invalid insn #1"
msgstr ""

#: config/mt/mt.c:369
msgid "PRINT_OPERAND_ADDRESS, 2 regs"
msgstr "PRINT_OPERAND_ADDRESS，兩個暫存器"

#: config/mt/mt.c:393
msgid "PRINT_OPERAND_ADDRESS, invalid insn #1"
msgstr "PRINT_OPERAND_ADDRESS，無效指令 #1"

#: config/rs6000/host-darwin.c:87
#, c-format
msgid "Out of stack space.\n"
msgstr "堆疊溢出。\n"

#: config/rs6000/host-darwin.c:108
#, c-format
msgid "Try running '%s' in the shell to raise its limit.\n"
msgstr "嘗試在命令解譯器中執行「%s」以提升它的極值。\n"

#: config/rs6000/rs6000.c:10200
#, c-format
msgid "invalid %%f value"
msgstr "無效 %%f 值"

#: config/rs6000/rs6000.c:10209
#, c-format
msgid "invalid %%F value"
msgstr "無效 %%F 值"

#: config/rs6000/rs6000.c:10218
#, c-format
msgid "invalid %%G value"
msgstr "無效 %%G 值"

#: config/rs6000/rs6000.c:10253
#, c-format
msgid "invalid %%j code"
msgstr "無效 %%j 程式碼"

#: config/rs6000/rs6000.c:10263
#, c-format
msgid "invalid %%J code"
msgstr "無效 %%J 程式碼"

#: config/rs6000/rs6000.c:10273
#, c-format
msgid "invalid %%k value"
msgstr "無效 %%k 值"

#: config/rs6000/rs6000.c:10293 config/xtensa/xtensa.c:1677
#, c-format
msgid "invalid %%K value"
msgstr "無效 %%K 值"

#: config/rs6000/rs6000.c:10360
#, c-format
msgid "invalid %%O value"
msgstr "無效 %%O 值"

#: config/rs6000/rs6000.c:10407
#, c-format
msgid "invalid %%q value"
msgstr "無效 %%q 值"

#: config/rs6000/rs6000.c:10451
#, c-format
msgid "invalid %%S value"
msgstr "無效 %%S 值"

#: config/rs6000/rs6000.c:10491
#, c-format
msgid "invalid %%T value"
msgstr "無效 %%T 值"

#: config/rs6000/rs6000.c:10501
#, c-format
msgid "invalid %%u value"
msgstr "無效 %%u 值"

#: config/rs6000/rs6000.c:10510 config/xtensa/xtensa.c:1647
#, c-format
msgid "invalid %%v value"
msgstr "無效 %%v 值"

#: config/rs6000/rs6000.c:19123
msgid "AltiVec argument passed to unprototyped function"
msgstr "傳遞 AltiVec 引數給無原型的函式"

#: config/s390/s390.c:4490
#, c-format
msgid "cannot decompose address"
msgstr "無法分解位址"

#: config/s390/s390.c:4700
msgid "UNKNOWN in print_operand !?"
msgstr "UNKNOWN 出現在 print_operand 中？！"

#: config/sh/sh.c:746
#, c-format
msgid "invalid operand to %%R"
msgstr "%%R 的運算元無效"

#: config/sh/sh.c:773
#, c-format
msgid "invalid operand to %%S"
msgstr "%%S 的運算元無效"

#: config/sh/sh.c:7679
msgid "created and used with different architectures / ABIs"
msgstr "建立和使用時使用了不同的架構/ABI"

#: config/sh/sh.c:7681
msgid "created and used with different ABIs"
msgstr "建立和使用時使用了不同的 ABI"

#: config/sh/sh.c:7683
msgid "created and used with different endianness"
msgstr "建立和使用時使用了不同的高/低位位元組在前設定"

#: config/sparc/sparc.c:6626 config/sparc/sparc.c:6632
#, c-format
msgid "invalid %%Y operand"
msgstr "無效的 %%Y 運算元"

#: config/sparc/sparc.c:6702
#, c-format
msgid "invalid %%A operand"
msgstr "無效的 %%A 運算元"

#: config/sparc/sparc.c:6712
#, c-format
msgid "invalid %%B operand"
msgstr "無效的 %%B 運算元"

#: config/sparc/sparc.c:6751
#, c-format
msgid "invalid %%c operand"
msgstr "無效的 %%c 運算元"

#: config/sparc/sparc.c:6752
#, c-format
msgid "invalid %%C operand"
msgstr "無效的 %%C 運算元"

#: config/sparc/sparc.c:6773
#, c-format
msgid "invalid %%d operand"
msgstr "無效的 %%d 運算元"

#: config/sparc/sparc.c:6774
#, c-format
msgid "invalid %%D operand"
msgstr "無效的 %%D 運算元"

#: config/sparc/sparc.c:6790
#, c-format
msgid "invalid %%f operand"
msgstr "無效的 %%f 運算元"

#: config/sparc/sparc.c:6804
#, c-format
msgid "invalid %%s operand"
msgstr "無效的 %%s 運算元"

#: config/sparc/sparc.c:6858
#, c-format
msgid "long long constant not a valid immediate operand"
msgstr "long long 常數不是一個有效的立即數值運算元"

#: config/sparc/sparc.c:6861
#, c-format
msgid "floating point constant not a valid immediate operand"
msgstr "浮點常數不是一個有效的立即數值運算元"

#: config/stormy16/stormy16.c:1764 config/stormy16/stormy16.c:1835
#, c-format
msgid "'B' operand is not constant"
msgstr "「B」運算元不是一個常數"

#: config/stormy16/stormy16.c:1791
#, c-format
msgid "'B' operand has multiple bits set"
msgstr "「B」運算元設定了多個位"

#: config/stormy16/stormy16.c:1817
#, c-format
msgid "'o' operand is not constant"
msgstr "「o」運算元不是一個常數"

#: config/stormy16/stormy16.c:1849
#, c-format
msgid "xstormy16_print_operand: unknown code"
msgstr "xstormy16_print_operand：不明程式碼"

#: config/v850/v850.c:360
msgid "const_double_split got a bad insn:"
msgstr "const_double_split 得到一個錯誤的指令："

#: config/v850/v850.c:924
msgid "output_move_single:"
msgstr "output_move_single："

#: config/xtensa/xtensa.c:748 config/xtensa/xtensa.c:780
#: config/xtensa/xtensa.c:789
msgid "bad test"
msgstr "錯誤的測試"

#: config/xtensa/xtensa.c:1635
#, c-format
msgid "invalid %%D value"
msgstr "無效的 %%D 值"

#: config/xtensa/xtensa.c:1672
msgid "invalid mask"
msgstr "無效遮罩"

#: config/xtensa/xtensa.c:1698
#, c-format
msgid "invalid %%x value"
msgstr "無效的 %%x 值"

#: config/xtensa/xtensa.c:1705
#, c-format
msgid "invalid %%d value"
msgstr "無效的 %%d 值"

#: config/xtensa/xtensa.c:1726 config/xtensa/xtensa.c:1736
#, c-format
msgid "invalid %%t/%%b value"
msgstr "無效的 %%t/%%b 值"

#: config/xtensa/xtensa.c:1778
msgid "invalid address"
msgstr "無效位址"

#: config/xtensa/xtensa.c:1803
msgid "no register in address"
msgstr "位址中無暫存器"

#: config/xtensa/xtensa.c:1811
msgid "address offset not a constant"
msgstr "位址偏移量不是一個常數"

#: cp/call.c:2441
msgid "candidates are:"
msgstr "備選為："

#: cp/call.c:6213
msgid "candidate 1:"
msgstr "備選 1："

#: cp/call.c:6214
msgid "candidate 2:"
msgstr "備選 2："

#: cp/decl2.c:695
msgid "candidates are: %+#D"
msgstr "備選為：%+#D"

#: cp/decl2.c:697
msgid "candidate is: %+#D"
msgstr "備選為：%+#D"

#: cp/g++spec.c:238 java/jvspec.c:417
#, c-format
msgid "argument to '%s' missing\n"
msgstr "「%s」缺少引數\n"

#: fortran/arith.c:141
msgid "Arithmetic OK at %L"
msgstr "%L 處算術正常"

#: fortran/arith.c:144
msgid "Arithmetic overflow at %L"
msgstr "%L 處算術向上溢位"

#: fortran/arith.c:147
msgid "Arithmetic underflow at %L"
msgstr "%L 處算術向下溢位"

#: fortran/arith.c:150
msgid "Arithmetic NaN at %L"
msgstr "%L 處算術 NaN"

#: fortran/arith.c:153
msgid "Division by zero at %L"
msgstr "%L 處被零除"

#: fortran/arith.c:156
msgid "Array operands are incommensurate at %L"
msgstr "%L 處陣列運算元無法被使用"

#: fortran/arith.c:160
msgid "Integer outside symmetric range implied by Standard Fortran at %L"
msgstr "%L 處整數超出標準 Fortran 隱含的對稱範圍"

#: fortran/arith.c:1384
msgid "Elemental binary operation"
msgstr "基本的二元作業"

#: fortran/arith.c:1920
#, no-c-format
msgid "Arithmetic OK converting %s to %s at %L"
msgstr "從 %s 轉換到 %s，在 %L 處：算術正常"

#: fortran/arith.c:1924
#, no-c-format
msgid "Arithmetic overflow converting %s to %s at %L"
msgstr "從 %s 轉換到 %s，在 %L 處：算術向上溢位"

#: fortran/arith.c:1928
#, no-c-format
msgid "Arithmetic underflow converting %s to %s at %L"
msgstr "從 %s 轉換到 %s，在 %L 處：算術向下溢位"

#: fortran/arith.c:1932
#, no-c-format
msgid "Arithmetic NaN converting %s to %s at %L"
msgstr "從 %s 轉換到 %s，在 %L 處：算術 NaN"

#: fortran/arith.c:1936
#, no-c-format
msgid "Division by zero converting %s to %s at %L"
msgstr "從 %s 轉換到 %s 時被零除，於 %L 處"

#: fortran/arith.c:1940
#, no-c-format
msgid "Array operands are incommensurate converting %s to %s at %L"
msgstr ""

#: fortran/arith.c:1944
#, no-c-format
msgid "Integer outside symmetric range implied by Standard Fortran converting %s to %s at %L"
msgstr ""

#: fortran/arith.c:2277 fortran/arith.c:2312 fortran/arith.c:2349
#: fortran/arith.c:2399
#, no-c-format
msgid "The Hollerith constant at %L is too long to convert to %s"
msgstr "%L 的荷勒瑞斯常數太長，無法被轉換為 %s"

#: fortran/arith.c:2445
#, no-c-format
msgid "Enumerator exceeds the C integer type at %C"
msgstr "%C 處：列舉量超過 C 整數類型"

#: fortran/array.c:97
#, no-c-format
msgid "Expected array subscript at %C"
msgstr "%C 處需要陣列下標"

#: fortran/array.c:124
#, no-c-format
msgid "Expected array subscript stride at %C"
msgstr "%C 需要陣列下標間隔"

#: fortran/array.c:167
#, no-c-format
msgid "Invalid form of array reference at %C"
msgstr "%C 處陣列參照形式無效"

#: fortran/array.c:172
#, no-c-format
msgid "Array reference at %C cannot have more than %d dimensions"
msgstr "%C 處的任何參照都不能多於 %d 維"

#: fortran/array.c:224
#, no-c-format
msgid "Variable '%s' at %L in this context must be constant"
msgstr "變數「%s」在 %L 處上下文中必須是常數"

#: fortran/array.c:300
#, no-c-format
msgid "Expected expression in array specification at %C"
msgstr "%C 處指定陣列時需要運算式"

#: fortran/array.c:379
#, no-c-format
msgid "Bad array specification for an explicitly shaped array at %C"
msgstr ""

#: fortran/array.c:390
#, no-c-format
msgid "Bad array specification for assumed shape array at %C"
msgstr ""

#: fortran/array.c:403
#, no-c-format
msgid "Bad specification for deferred shape array at %C"
msgstr ""

#: fortran/array.c:407
#, no-c-format
msgid "Bad specification for assumed size array at %C"
msgstr ""

#: fortran/array.c:416
#, no-c-format
msgid "Expected another dimension in array declaration at %C"
msgstr "%C 處陣列宣告需要另外一維"

#: fortran/array.c:422
#, no-c-format
msgid "Array specification at %C has more than %d dimensions"
msgstr "%C 處陣列指定了多於 %d 的維數"

#: fortran/array.c:627
#, no-c-format
msgid "duplicated initializer"
msgstr "重複的初始值設定"

#: fortran/array.c:720
#, no-c-format
msgid "DO-iterator '%s' at %L is inside iterator of the same name"
msgstr "DO 游標「%s」在 %L 處出現在另一個同名游標作用欄位內"

#: fortran/array.c:822 fortran/array.c:931
#, no-c-format
msgid "Syntax error in array constructor at %C"
msgstr "%C 陣列建構語法錯誤"

#: fortran/array.c:877
#, no-c-format
msgid "New in Fortran 2003: [...] style array constructors at %C"
msgstr "Fortran 2003 中的新特性：%C 處 [...] 風格的陣列建構"

#: fortran/array.c:891
#, no-c-format
msgid "Empty array constructor at %C is not allowed"
msgstr "%C 處的空陣列建構不被允許"

#: fortran/array.c:976
#, no-c-format
msgid "Element in %s array constructor at %L is %s"
msgstr "%s 陣列建構中的元素在 %L 處是 %s"

#: fortran/array.c:1305
#, no-c-format
msgid "Iterator step at %L cannot be zero"
msgstr "%L 迭代次數不能為零"

#: fortran/check.c:44
#, no-c-format
msgid "'%s' argument of '%s' intrinsic at %L must be %s"
msgstr "引數「%s」(屬於內建函式「%s」，位於 %L)必須是 %s"

#: fortran/check.c:60
#, no-c-format
msgid "'%s' argument of '%s' intrinsic at %L must be a numeric type"
msgstr "引數「%s」(屬於內建函式「%s」，位於 %L)必須具有數字類型"

#: fortran/check.c:75 fortran/check.c:684 fortran/check.c:694
#, no-c-format
msgid "'%s' argument of '%s' intrinsic at %L must be INTEGER or REAL"
msgstr "引數「%s」(屬於內建函式「%s」，位於 %L)必須為整數型或實數型"

#: fortran/check.c:92
#, no-c-format
msgid "'%s' argument of '%s' intrinsic at %L must be REAL or COMPLEX"
msgstr "引數「%s」(屬於內建函式「%s」，位於 %L)必須為實數型或複數型"

#: fortran/check.c:118
#, no-c-format
msgid "'%s' argument of '%s' intrinsic at %L must be a constant"
msgstr "引數「%s」(屬於內建函式「%s」，位於 %L)必須是一個常數"

#: fortran/check.c:126
#, no-c-format
msgid "Invalid kind for %s at %L"
msgstr "%s 種別無效，於 %L 處"

#: fortran/check.c:146
#, no-c-format
msgid "'%s' argument of '%s' intrinsic at %L must be double precision"
msgstr "引數「%s」(屬於內建函式「%s」，位於 %L)必須為雙精度"

#: fortran/check.c:163
#, no-c-format
msgid "'%s' argument of '%s' intrinsic at %L must be a logical array"
msgstr "引數「%s」(屬於內建函式「%s」，位於 %L)必須是一個邏輯陣列"

#: fortran/check.c:180
#, no-c-format
msgid "'%s' argument of '%s' intrinsic at %L must be an array"
msgstr "引數「%s」(屬於內建函式「%s」，位於 %L)必須是一個陣列"

#: fortran/check.c:195
#, no-c-format
msgid "'%s' argument of '%s' intrinsic at %L must be a scalar"
msgstr "引數「%s」(屬於內建函式「%s」，位於 %L)必須是一個標量"

#: fortran/check.c:210
#, no-c-format
msgid "'%s' argument of '%s' intrinsic at %L must be the same type and kind as '%s'"
msgstr "引數「%s」(屬於內建函式「%s」，位於 %L)必須具有與「%s」一樣的類型和種別"

#: fortran/check.c:225
#, no-c-format
msgid "'%s' argument of '%s' intrinsic at %L must be of rank %d"
msgstr "引數「%s」(屬於內建函式「%s」，位於 %L)的秩必須為 %d"

#: fortran/check.c:239
#, no-c-format
msgid "'%s' argument of '%s' intrinsic at %L must not be OPTIONAL"
msgstr "引數「%s」(屬於內建函式「%s」，位於 %L)不能為可選的"

#: fortran/check.c:259
#, no-c-format
msgid "'%s' argument of '%s' intrinsic at %L must be of kind %d"
msgstr "引數「%s」(屬於內建函式「%s」，位於 %L)必須具有種別 %d"

#: fortran/check.c:280
#, no-c-format
msgid "'%s' argument of '%s' intrinsic at %L cannot be INTENT(IN)"
msgstr "「%s」引數(屬於內建函式「%s」)在 %L 處不能是 INTENT(IN)"

#: fortran/check.c:286
#, no-c-format
msgid "'%s' argument of '%s' intrinsic at %L must be a variable"
msgstr "引數「%s」(屬於內建函式「%s」，位於 %L)必須是一個變數"

#: fortran/check.c:303
#, no-c-format
msgid "Missing DIM parameter in intrinsic '%s' at %L"
msgstr "內建函式「%s」在 %L 處缺少 DIM 參數"

#: fortran/check.c:371
#, no-c-format
msgid "'dim' argument of '%s' intrinsic at %L is not a valid dimension index"
msgstr "「%s」內建函式的「dim」引數(於 %L 處)不是一個有效的維數索引"

#: fortran/check.c:456
#, no-c-format
msgid "'%s' argument of '%s' intrinsic at %L must be ALLOCATABLE"
msgstr "引數「%s」(屬於內建函式「%s」，位於 %L)必須為 ALLOCATABLE"

#: fortran/check.c:477 fortran/check.c:3178
#, no-c-format
msgid "'%s' and '%s' arguments of '%s' intrinsic at %L must have the same type"
msgstr "「%s」和「%s」引數(屬於「%s」內建函式)在 %L 處類型必須相同"

#: fortran/check.c:486 fortran/check.c:974 fortran/check.c:1109
#: fortran/check.c:1172 fortran/check.c:1397
#, no-c-format
msgid "Extension: Different type kinds at %L"
msgstr "擴充：%L 處類型種別不同"

#: fortran/check.c:511 fortran/check.c:1732
#, no-c-format
msgid "'%s' argument of '%s' intrinsic at %L must be a POINTER"
msgstr "引數「%s」(屬於內建函式「%s」，位於 %L)必須是一個 POINTER"

#: fortran/check.c:523
#, no-c-format
msgid "NULL pointer at %L is not permitted as actual argument of '%s' intrinsic function"
msgstr "%L 的 NULL 指標不能做為內建函式「%s」的引數"

#: fortran/check.c:538
#, no-c-format
msgid "'%s' argument of '%s' intrinsic at %L must be a POINTER or a TARGET"
msgstr "引數「%s」(屬於內建函式「%s」，位於 %L)必須是一個 POINTER 或 TARGET"

#: fortran/check.c:554
#, no-c-format
msgid "Array section with a vector subscript at %L shall not be the target of a pointer"
msgstr "%L 處由向量下標選擇的部分陣列不應是指標的目的"

#: fortran/check.c:664 fortran/check.c:766
#, no-c-format
msgid "'%s' argument of '%s' intrinsic at %L must not be present if 'x' is COMPLEX"
msgstr "當「x」是 COMPLEX 時「%s」引數(屬於「%s」內建函式，在 %L 處)不能存在"

#: fortran/check.c:815 fortran/check.c:1477 fortran/check.c:1485
#, no-c-format
msgid "'%s' argument of '%s' intrinsic at %L must be numeric or LOGICAL"
msgstr "引數「%s」(屬於內建函式「%s」，位於 %L)必須為數字或 LOGICAL 型"

#: fortran/check.c:829
#, no-c-format
msgid "different shape for arguments '%s' and '%s' at %L for intrinsic 'dot_product'"
msgstr ""

#: fortran/check.c:1079
#, no-c-format
msgid "Argument of %s at %L must be of length one"
msgstr "%s 的參數(位於 %L)長度必須為 1"

#: fortran/check.c:1131
#, no-c-format
msgid "'%s' argument of '%s' intrinsic at %L must be the same kind as '%s'"
msgstr "引數「%s」(屬於內建函式「%s」，位於 %L)必須具有與「%s」一樣的種別"

#: fortran/check.c:1246
#, no-c-format
msgid "'%s' argument of '%s' intrinsic at %L must be a non-derived type"
msgstr "引數「%s」(屬於內建函式「%s」，位於 %L)不能是衍生類型"

#: fortran/check.c:1369
#, no-c-format
msgid "Intrinsic '%s' at %L must have at least two arguments"
msgstr "內建函式「%s」 於 %L 處必須有至少兩個引數"

#: fortran/check.c:1403
#, no-c-format
msgid "'a%d' argument of '%s' intrinsic at %L must be %s(%d)"
msgstr "引數「%s」(屬於內建函式「%s」，位於 %L)必須是 %s(%d)"

#: fortran/check.c:1428
#, no-c-format
msgid "'a1' argument of '%s' intrinsic at %L must be INTEGER or REAL"
msgstr "「%s」內建函式的「a1」引數在 %L 處必須是 INTEGER 或 REAL"

#: fortran/check.c:1499
#, no-c-format
msgid "different shape on dimension 1 for arguments '%s' and '%s' at %L for intrinsic matmul"
msgstr ""

#: fortran/check.c:1519
#, no-c-format
msgid "different shape on dimension 2 for argument '%s' and dimension 1 for argument '%s' at %L for intrinsic matmul"
msgstr ""

#: fortran/check.c:1528
#, no-c-format
msgid "'%s' argument of '%s' intrinsic at %L must be of rank 1 or 2"
msgstr "引數「%s」(屬於內建函式「%s」，位於 %L)的秩必須為 1 或 2"

#: fortran/check.c:1779
#, no-c-format
msgid "'%s' argument of '%s' intrinsic at %L must be of type REAL or COMPLEX"
msgstr "「%s」引數(屬於內建函式「%s」，於 %L 處)的類型必須為 REAL 或 COMPLEX"

#: fortran/check.c:1800
#, no-c-format
msgid "'%s' argument of '%s' intrinsic at %L must be of a dummy variable"
msgstr "引數「%s」(屬於內建函式「%s」，位於 %L)必須是一個啞元變數"

#: fortran/check.c:1808
#, no-c-format
msgid "'%s' argument of '%s' intrinsic at %L must be of an OPTIONAL dummy variable"
msgstr "「%s」引數(屬於「%s」內建函式，位於 %L)必須是一個 OPTIONAL 啞變數"

#: fortran/check.c:1924
#, no-c-format
msgid "'shape' argument of 'reshape' intrinsic at %L must be an array of constant size"
msgstr "「reshape」內建函式的「shape」引數在 %L 處必須是大小為常數的陣列"

#: fortran/check.c:1934
#, no-c-format
msgid "'shape' argument of 'reshape' intrinsic at %L has more than %d elements"
msgstr "「reshape」內建函式的「shape」引數在 %L 處有多於 %d 個的元素"

#: fortran/check.c:2022
#, no-c-format
msgid "Missing arguments to %s intrinsic at %L"
msgstr "%s 內建函式缺少引數，於 %L 處"

#: fortran/check.c:2063
#, no-c-format
msgid "'source' argument of 'shape' intrinsic at %L must not be an assumed size array"
msgstr "「shape」內建函式的「source」引數在 %L 處不能是假定大小的陣列"

#: fortran/check.c:2125
#, no-c-format
msgid "'%s' argument of '%s' intrinsic at %L must be less than rank %d"
msgstr "引數「%s」(屬於內建函式「%s」，位於 %L)秩必須小於 %d"

#: fortran/check.c:2582 fortran/check.c:2602
#, no-c-format
msgid "Too many arguments to %s at %L"
msgstr "給予函式 %s 的參數太多，於 %L"

#: fortran/check.c:2730 fortran/check.c:3092 fortran/check.c:3116
#, no-c-format
msgid "'%s' argument of '%s' intrinsic at %L must be INTEGER or PROCEDURE"
msgstr "引數「%s」(屬於內建函式「%s」，位於 %L)必須為 INTEGER 或 PROCEDURE"

#: fortran/check.c:3163 fortran/check.c:3171
#, no-c-format
msgid "'%s' argument of '%s' intrinsic at %L must be INTEGER or LOGICAL"
msgstr "引數「%s」(屬於內建函式「%s」，位於 %L)必須為 INTEGER 或 LOGICAL"

#: fortran/data.c:63
#, no-c-format
msgid "non-constant array in DATA statement %L."
msgstr "%L DATA 敘述中有非常數陣列"

#: fortran/data.c:327
#, no-c-format
msgid "Extension: re-initialization of '%s' at %L"
msgstr "擴充：「%s」重初始化於 %L"

#: fortran/decl.c:208
#, no-c-format
msgid "Host associated variable '%s' may not be in the DATA statement at %C."
msgstr ""

#: fortran/decl.c:215
#, no-c-format
msgid "Extension: initialization of common block variable '%s' in DATA statement at %C"
msgstr "擴充：DATA 敘述中對公共塊變數「%s」在 %C 處初始化"

#: fortran/decl.c:301
#, no-c-format
msgid "Symbol '%s' must be a PARAMETER in DATA statement at %C"
msgstr "DATA 敘述中符號「%s」必須是一個 PARAMETER，在 %C 處"

#: fortran/decl.c:408
#, no-c-format
msgid "Initialization at %C is not allowed in a PURE procedure"
msgstr "初始化不允許出現在 %C 處的 PURE 程序中"

#: fortran/decl.c:455
#, no-c-format
msgid "DATA statement at %C is not allowed in a PURE procedure"
msgstr "DATA 敘述不允許出現在 %C 處的 PURE 程序中"

#: fortran/decl.c:483
#, no-c-format
msgid "Bad INTENT specification at %C"
msgstr "%C 處錯誤地指定 INTENT"

#: fortran/decl.c:548
#, no-c-format
msgid "Syntax error in character length specification at %C"
msgstr "%C 處指定字元長度時語法錯誤"

#: fortran/decl.c:623
#, no-c-format
msgid "Procedure '%s' at %C is already defined at %L"
msgstr "程序「%s」在 %C 處已經於 %L 處被宣告"

#: fortran/decl.c:633
#, no-c-format
msgid "Procedure '%s' at %C has an explicit interface and must not have attributes declared at %L"
msgstr "程序「%s」在 %C 處具有顯式介面，而且必須在 %L 處不具有已宣告的屬性"

#: fortran/decl.c:805
#, no-c-format
msgid "Initializer not allowed for PARAMETER '%s' at %C"
msgstr "PARAMETER「%s」在 %C 處不允許有初始值設定"

#: fortran/decl.c:814
#, no-c-format
msgid "Initializer not allowed for COMMON variable '%s' at %C"
msgstr "COMMON 變數「%s」在 %C 處不允許有初始值設定"

#: fortran/decl.c:824
#, no-c-format
msgid "PARAMETER at %L is missing an initializer"
msgstr "%L 處 PARAMETER 缺少初始值設定"

#: fortran/decl.c:835
#, no-c-format
msgid "Variable '%s' at %C with an initializer already appears in a DATA statement"
msgstr ""

#: fortran/decl.c:913
#, no-c-format
msgid "Component at %C must have the POINTER attribute"
msgstr "%C 處的元件必須有 POINTER 屬性"

#: fortran/decl.c:922
#, no-c-format
msgid "Array component of structure at %C must have explicit or deferred shape"
msgstr ""

#: fortran/decl.c:951
#, no-c-format
msgid "Pointer array component of structure at %C must have a deferred shape"
msgstr ""

#: fortran/decl.c:961
#, no-c-format
msgid "Array component of structure at %C must have an explicit shape"
msgstr ""

#: fortran/decl.c:987
#, no-c-format
msgid "NULL() initialization at %C is ambiguous"
msgstr "%C 處的 NULL() 初始化有歧義"

#: fortran/decl.c:1054
#, no-c-format
msgid "Enumerator cannot be array at %C"
msgstr "%C 處列舉量不能是陣列"

#: fortran/decl.c:1115 fortran/decl.c:3374
#, no-c-format
msgid "Duplicate array spec for Cray pointee at %C."
msgstr ""

#: fortran/decl.c:1167
#, no-c-format
msgid "Function name '%s' not allowed at %C"
msgstr "函式名「%s」不允許出現在 %C 處"

#: fortran/decl.c:1183
#, no-c-format
msgid "Extension: Old-style initialization at %C"
msgstr "擴充：%C 處舊式的初始化"

#: fortran/decl.c:1199
#, no-c-format
msgid "Initialization at %C isn't for a pointer variable"
msgstr "%C 的初始化不是為指標變數準備的"

#: fortran/decl.c:1207
#, no-c-format
msgid "Pointer initialization requires a NULL() at %C"
msgstr "%C 處的指標初始化需要 NULL()"

#: fortran/decl.c:1214
#, no-c-format
msgid "Initialization of pointer at %C is not allowed in a PURE procedure"
msgstr "%C 處對指標的初始化不允許出現在 PURE 程序中"

#: fortran/decl.c:1228
#, no-c-format
msgid "Pointer initialization at %C requires '=>', not '='"
msgstr "在 %C 處的指標初始化需要「=>」，而不是「=」"

#: fortran/decl.c:1236
#, no-c-format
msgid "Expected an initialization expression at %C"
msgstr "%C 處需要一個初始化運算式"

#: fortran/decl.c:1243
#, no-c-format
msgid "Initialization of variable at %C is not allowed in a PURE procedure"
msgstr "%C 處對變數的初始化不允許出現在 PURE 程序中"

#: fortran/decl.c:1265
#, no-c-format
msgid "ENUMERATOR %L not initialized with integer expression"
msgstr ""

#: fortran/decl.c:1324 fortran/decl.c:1333
#, no-c-format
msgid "Old-style type declaration %s*%d not supported at %C"
msgstr "舊式的型態宣告 %s*%d 在 %C 處不被支援"

#: fortran/decl.c:1338
#, no-c-format
msgid "Nonstandard type declaration %s*%d at %C"
msgstr "%C 處非標準的型態宣告 %s*%d"

#: fortran/decl.c:1372
#, no-c-format
msgid "Expected initialization expression at %C"
msgstr "%C 處需要初始化運算式"

#: fortran/decl.c:1378
#, no-c-format
msgid "Expected scalar initialization expression at %C"
msgstr "%C 處需要標量初始化運算式"

#: fortran/decl.c:1396
#, no-c-format
msgid "Kind %d not supported for type %s at %C"
msgstr "種別 %d 在 %C 處 不為類型 %s 所支援"

#: fortran/decl.c:1405
#, no-c-format
msgid "Missing right paren at %C"
msgstr "%C 處缺少右括號"

#: fortran/decl.c:1494 fortran/decl.c:1537
#, no-c-format
msgid "Kind %d is not a CHARACTER kind at %C"
msgstr "種別 %d 在 %C 處不是 CHARACTER 種別"

#: fortran/decl.c:1531
#, no-c-format
msgid "Syntax error in CHARACTER declaration at %C"
msgstr "%C 的 CHARACTER 宣告語法錯誤"

#: fortran/decl.c:1592
#, no-c-format
msgid "Extension: BYTE type at %C"
msgstr "擴充：%C 處的 BYTE 類型"

#: fortran/decl.c:1598
#, no-c-format
msgid "BYTE type used at %C is not available on the target machine"
msgstr "%C 使用到的 BYTE 類型在目標平臺上不可"

#: fortran/decl.c:1647
#, no-c-format
msgid "DOUBLE COMPLEX at %C does not conform to the Fortran 95 standard"
msgstr "%C 處的 DOUBLE COMPLEX 並不遵循 Fortran 95 標準"

#: fortran/decl.c:1670
#, no-c-format
msgid "Type name '%s' at %C is ambiguous"
msgstr "類型名「%s」(於 %C 處)有歧義"

#: fortran/decl.c:1736
#, no-c-format
msgid "Missing character range in IMPLICIT at %C"
msgstr ""

#: fortran/decl.c:1782
#, no-c-format
msgid "Letters must be in alphabetic order in IMPLICIT statement at %C"
msgstr "%C 處 IMPLICIT 敘述中的字母必須按序排列"

#: fortran/decl.c:1836
#, no-c-format
msgid "Empty IMPLICIT statement at %C"
msgstr "%C IMPLICIT 敘述為空"

#: fortran/decl.c:2000
#, no-c-format
msgid "Enumerator cannot have attributes %C"
msgstr "列舉量不能有屬性 %C"

#: fortran/decl.c:2013
#, no-c-format
msgid "Missing dimension specification at %C"
msgstr "%C 處沒有指定維數"

#: fortran/decl.c:2095
#, no-c-format
msgid "Duplicate %s attribute at %L"
msgstr "重複的 %s 屬性，位於 %L"

#: fortran/decl.c:2112
#, no-c-format
msgid "Attribute at %L is not allowed in a TYPE definition"
msgstr ""

#: fortran/decl.c:2126
#, no-c-format
msgid "%s attribute at %L is not allowed outside of a MODULE"
msgstr "%s 屬性(位於 %L)不允許出現在 MODULE 以外"

#. Now we have an error, which we signal, and then fix up
#. because the knock-on is plain and simple confusing.
#: fortran/decl.c:2264
#, no-c-format
msgid "Derived type at %C has not been previously defined and so cannot appear in a derived type definition."
msgstr "%C 處的衍生類型尚未被定義，因此不能出現在衍生類型定義中"

#: fortran/decl.c:2294
#, no-c-format
msgid "Syntax error in data declaration at %C"
msgstr "%C 處資料宣告語法錯誤"

#: fortran/decl.c:2440
#, no-c-format
msgid "Name '%s' at %C is the name of the procedure"
msgstr "名稱「%s」(位於 %C)是一個程序的名稱"

#: fortran/decl.c:2452
#, no-c-format
msgid "Unexpected junk in formal argument list at %C"
msgstr "%C 處參數清單中有非預期的無用字元"

#: fortran/decl.c:2470
#, no-c-format
msgid "Duplicate symbol '%s' in formal argument list at %C"
msgstr "符號「%s」在 %C 處的參數清單中重複出現"

#: fortran/decl.c:2513
#, no-c-format
msgid "Unexpected junk following RESULT variable at %C"
msgstr "%C 處的 RESULT 變數後有非預期的無用字元"

#: fortran/decl.c:2520
#, no-c-format
msgid "RESULT variable at %C must be different than function name"
msgstr "%C 處 RESULT 變數不能與函式同名"

#: fortran/decl.c:2575
#, no-c-format
msgid "Expected formal argument list in function definition at %C"
msgstr ""

#: fortran/decl.c:2586
#, no-c-format
msgid "Unexpected junk after function declaration at %C"
msgstr "%C 處的函式宣告後有非預期的無用字元"

#: fortran/decl.c:2607
#, no-c-format
msgid "Function '%s' at %C already has a type of %s"
msgstr "函式「%s」(位於 %C)已經具有類型 %s"

#: fortran/decl.c:2678
#, no-c-format
msgid "ENTRY statement at %C cannot appear within a PROGRAM"
msgstr "%C 處的 ENTRY 敘述不能出現在 PROGRAM 中"

#: fortran/decl.c:2681
#, no-c-format
msgid "ENTRY statement at %C cannot appear within a MODULE"
msgstr "%C 處的 ENTRY 敘述不能出現在 MODULE 中"

#: fortran/decl.c:2685
#, no-c-format
msgid "ENTRY statement at %C cannot appear within a BLOCK DATA"
msgstr "%C 處的 ENTRY 敘述不能出現在 BLOCK DATA 中"

#: fortran/decl.c:2689
#, no-c-format
msgid "ENTRY statement at %C cannot appear within an INTERFACE"
msgstr "%C 處的 ENTRY 敘述不能出現在 INTERFACE 中"

#: fortran/decl.c:2693
#, no-c-format
msgid "ENTRY statement at %C cannot appear within a DERIVED TYPE block"
msgstr "%C 處的 ENTRY 敘述不能出現在 DERIVED TYPE 區塊中"

#: fortran/decl.c:2698
#, no-c-format
msgid "ENTRY statement at %C cannot appear within an IF-THEN block"
msgstr "%C 處的 ENTRY 敘述不能出現在 IF-THEN 區塊中"

#: fortran/decl.c:2702
#, no-c-format
msgid "ENTRY statement at %C cannot appear within a DO block"
msgstr "%C 處的 ENTRY 敘述不能出現在 DO 中"

#: fortran/decl.c:2706
#, no-c-format
msgid "ENTRY statement at %C cannot appear within a SELECT block"
msgstr "%C 處的 ENTRY 敘述不能出現在 SELECT 區塊中"

#: fortran/decl.c:2710
#, no-c-format
msgid "ENTRY statement at %C cannot appear within a FORALL block"
msgstr "%C 處的 ENTRY 敘述不能出現在 FORALL 區塊中"

#: fortran/decl.c:2714
#, no-c-format
msgid "ENTRY statement at %C cannot appear within a WHERE block"
msgstr "%C 處的 ENTRY 敘述不能出現在 WHERE 區塊中"

#: fortran/decl.c:2718
#, no-c-format
msgid "ENTRY statement at %C cannot appear within a contained subprogram"
msgstr "%C 處的 ENTRY 敘述不能出現在巢狀的子程式中"

#: fortran/decl.c:2731
#, no-c-format
msgid "ENTRY statement at %C cannot appear in a contained procedure"
msgstr "%C 處 ENTRY 敘述不能出現在被包含的程序中"

#: fortran/decl.c:2812
#, no-c-format
msgid "RESULT attribute required in ENTRY statement at %C"
msgstr "%C 處的 ENTRY 敘述需要 RESULT 屬性"

#: fortran/decl.c:3053
#, no-c-format
msgid "Unexpected END statement at %C"
msgstr "%C 處非預期的 END 敘述"

#. We would have required END [something]
#: fortran/decl.c:3062
#, no-c-format
msgid "%s statement expected at %L"
msgstr "需要 %s 敘述在 %L 處"

#: fortran/decl.c:3073
#, no-c-format
msgid "Expecting %s statement at %C"
msgstr "需要 %s 敘述，於 %C"

#: fortran/decl.c:3087
#, no-c-format
msgid "Expected block name of '%s' in %s statement at %C"
msgstr "需要塊名「%s」在「%s」運算式中，於 %C"

#: fortran/decl.c:3103
#, no-c-format
msgid "Expected terminating name at %C"
msgstr "%C 處需要結束名"

#: fortran/decl.c:3112
#, no-c-format
msgid "Expected label '%s' for %s statement at %C"
msgstr "需要標籤「%s」，為 %s 敘述，於 %C"

#: fortran/decl.c:3167
#, no-c-format
msgid "Missing array specification at %L in DIMENSION statement"
msgstr ""

#: fortran/decl.c:3176
#, no-c-format
msgid "Array specification must be deferred at %L"
msgstr "%L 處陣列指定必須延遲"

#: fortran/decl.c:3253
#, no-c-format
msgid "Unexpected character in variable list at %C"
msgstr "%C 處變數清單中有非預期的無用字元"

#: fortran/decl.c:3290
#, no-c-format
msgid "Expected '(' at %C"
msgstr "在 %C 處需要「(」"

#: fortran/decl.c:3304 fortran/decl.c:3345
#, no-c-format
msgid "Expected variable name at %C"
msgstr "在 %C 處需要變數名"

#: fortran/decl.c:3320
#, no-c-format
msgid "Cray pointer at %C must be an integer."
msgstr "%C 處 Cray 指標必須是一個整數。"

#: fortran/decl.c:3324
#, no-c-format
msgid "Cray pointer at %C has %d bytes of precision; memory addresses require %d bytes."
msgstr "%C 處的 Cray 指標精度為 %d；記憶體位址需要 %d 位元組"

#: fortran/decl.c:3331
#, no-c-format
msgid "Expected \",\" at %C"
msgstr "在 %C 處需要「,」"

#: fortran/decl.c:3394
#, no-c-format
msgid "Expected \")\" at %C"
msgstr "在 %C 處需要「)」"

#: fortran/decl.c:3406
#, no-c-format
msgid "Expected \",\" or end of statement at %C"
msgstr "在 %C 處需要「,」或敘述尾"

#: fortran/decl.c:3471
#, no-c-format
msgid "Cray pointer declaration at %C requires -fcray-pointer flag."
msgstr "%C 處的 Cray 指標宣告需要 -fcray-pointer 旗標。"

#: fortran/decl.c:3569
#, no-c-format
msgid "Access specification of the %s operator at %C has already been specified"
msgstr ""

#: fortran/decl.c:3587
#, no-c-format
msgid "Access specification of the .%s. operator at %C has already been specified"
msgstr ""

#: fortran/decl.c:3674
#, no-c-format
msgid "Expected variable name at %C in PARAMETER statement"
msgstr ""

#: fortran/decl.c:3681
#, no-c-format
msgid "Expected = sign in PARAMETER statement at %C"
msgstr "%C 在 PARAMETER 敘述中需要 = 符號"

#: fortran/decl.c:3687
#, no-c-format
msgid "Expected expression at %C in PARAMETER statement"
msgstr "%C 在 PARAMETER 敘述中需要運算式"

#: fortran/decl.c:3745
#, no-c-format
msgid "Unexpected characters in PARAMETER statement at %C"
msgstr "%C 處 PARAMETER 敘述中有非預期的字元"

#: fortran/decl.c:3770
#, no-c-format
msgid "Blanket SAVE statement at %C follows previous SAVE statement"
msgstr ""

#: fortran/decl.c:3783
#, no-c-format
msgid "SAVE statement at %C follows blanket SAVE statement"
msgstr "%C 處 SAVE 敘述跟隨空白 SAVE 敘述"

#: fortran/decl.c:3829
#, no-c-format
msgid "Syntax error in SAVE statement at %C"
msgstr "%C SAVE 敘述語法錯誤"

#: fortran/decl.c:3850
#, no-c-format
msgid "MODULE PROCEDURE at %C must be in a generic module interface"
msgstr ""

#: fortran/decl.c:3910
#, no-c-format
msgid "Derived type at %C can only be PRIVATE within a MODULE"
msgstr ""

#: fortran/decl.c:3923
#, no-c-format
msgid "Derived type at %C can only be PUBLIC within a MODULE"
msgstr ""

#: fortran/decl.c:3934
#, no-c-format
msgid "Expected :: in TYPE definition at %C"
msgstr "%C 在 TYPE 定義中需要 ::"

#: fortran/decl.c:3951
#, no-c-format
msgid "Type name '%s' at %C cannot be the same as an intrinsic type"
msgstr "類型「%s」(位於 %C)不能與內建類型同名"

#: fortran/decl.c:3961
#, no-c-format
msgid "Derived type name '%s' at %C already has a basic type of %s"
msgstr ""

#: fortran/decl.c:3978
#, no-c-format
msgid "Derived type definition of '%s' at %C has already been defined"
msgstr ""

#: fortran/decl.c:4012
#, no-c-format
msgid "Cray Pointee at %C cannot be assumed shape array"
msgstr ""

#: fortran/decl.c:4033
#, no-c-format
msgid "New in Fortran 2003: ENUM AND ENUMERATOR at %C"
msgstr "Fortran 2003 新特性：%C 處的 ENUM AND ENUMERATOR"

#: fortran/decl.c:4057
#, no-c-format
msgid "ENUM definition statement expected before %C"
msgstr ""

#: fortran/decl.c:4090
#, no-c-format
msgid "Syntax error in ENUMERATOR definition at %C"
msgstr "%C 處 ENUMERATOR 定義中語法錯誤"

#: fortran/dump-parse-tree.c:53
#, c-format
msgid "%-5d "
msgstr "%-5d "

#: fortran/dump-parse-tree.c:55
#, c-format
msgid "      "
msgstr "      "

#: fortran/dump-parse-tree.c:79 fortran/dump-parse-tree.c:597
#, c-format
msgid "(%s "
msgstr "(%s"

#: fortran/dump-parse-tree.c:92 fortran/dump-parse-tree.c:844
#: fortran/dump-parse-tree.c:881 fortran/dump-parse-tree.c:891
#, c-format
msgid "%d"
msgstr "%d"

#: fortran/dump-parse-tree.c:96 fortran/dump-parse-tree.c:123
#: fortran/dump-parse-tree.c:166 fortran/dump-parse-tree.c:403
#: fortran/dump-parse-tree.c:498 fortran/dump-parse-tree.c:584
#: fortran/dump-parse-tree.c:605
#, c-format
msgid ")"
msgstr ")"

#: fortran/dump-parse-tree.c:106 fortran/dump-parse-tree.c:421
#, c-format
msgid "("
msgstr "("

#: fortran/dump-parse-tree.c:112
#, c-format
msgid "%s = "
msgstr "%s = "

#: fortran/dump-parse-tree.c:116
#, c-format
msgid "(arg not-present)"
msgstr "(沒有引數)"

#: fortran/dump-parse-tree.c:120 fortran/dump-parse-tree.c:397
#: fortran/dump-parse-tree.c:494
#, c-format
msgid " "
msgstr " "

#: fortran/dump-parse-tree.c:137 fortran/dump-parse-tree.c:312
#, c-format
msgid "()"
msgstr "()"

#: fortran/dump-parse-tree.c:141
#, c-format
msgid "(%d"
msgstr "(%d"

#: fortran/dump-parse-tree.c:155
#, c-format
msgid " %s "
msgstr " %s "

#: fortran/dump-parse-tree.c:182
#, c-format
msgid "FULL"
msgstr "(滿)"

#: fortran/dump-parse-tree.c:213 fortran/dump-parse-tree.c:222
#: fortran/dump-parse-tree.c:297
#, c-format
msgid " , "
msgstr " , "

#: fortran/dump-parse-tree.c:227
#, c-format
msgid "UNKNOWN"
msgstr "不明"

#: fortran/dump-parse-tree.c:252
#, c-format
msgid " %% %s"
msgstr " %% %s"

#: fortran/dump-parse-tree.c:324 fortran/dump-parse-tree.c:381
#, c-format
msgid "''"
msgstr "''"

#: fortran/dump-parse-tree.c:326
#, c-format
msgid "%c"
msgstr "%c"

#: fortran/dump-parse-tree.c:333
#, c-format
msgid "%s("
msgstr "%s("

#: fortran/dump-parse-tree.c:339
#, c-format
msgid "(/ "
msgstr "(/ "

#: fortran/dump-parse-tree.c:341
#, c-format
msgid " /)"
msgstr " /)"

#: fortran/dump-parse-tree.c:347
#, c-format
msgid "NULL()"
msgstr "#NULL!"

#: fortran/dump-parse-tree.c:357 fortran/dump-parse-tree.c:370
#: fortran/dump-parse-tree.c:395 fortran/dump-parse-tree.c:401
#, c-format
msgid "_%d"
msgstr "_%d"

#: fortran/dump-parse-tree.c:362
#, c-format
msgid ".true."
msgstr "TRUE()"

#: fortran/dump-parse-tree.c:364
#, c-format
msgid ".false."
msgstr ".false."

#: fortran/dump-parse-tree.c:391
#, c-format
msgid "(complex "
msgstr "複數"

#: fortran/dump-parse-tree.c:407
#, c-format
msgid "???"
msgstr "???"

#: fortran/dump-parse-tree.c:415 fortran/dump-parse-tree.c:701
#, c-format
msgid "%s:"
msgstr "%s："

#: fortran/dump-parse-tree.c:425
#, c-format
msgid "U+ "
msgstr "U+ "

#: fortran/dump-parse-tree.c:428
#, c-format
msgid "U- "
msgstr "U- "

#: fortran/dump-parse-tree.c:431
#, c-format
msgid "+ "
msgstr "+ "

#: fortran/dump-parse-tree.c:434
#, c-format
msgid "- "
msgstr "- "

#: fortran/dump-parse-tree.c:437
#, c-format
msgid "* "
msgstr "* "

#: fortran/dump-parse-tree.c:440
#, c-format
msgid "/ "
msgstr "/ "

#: fortran/dump-parse-tree.c:443
#, c-format
msgid "** "
msgstr "** "

#: fortran/dump-parse-tree.c:446
#, c-format
msgid "// "
msgstr "// "

#: fortran/dump-parse-tree.c:449
#, c-format
msgid "AND "
msgstr "AND "

#: fortran/dump-parse-tree.c:452
#, c-format
msgid "OR "
msgstr "OR "

#: fortran/dump-parse-tree.c:455
#, c-format
msgid "EQV "
msgstr "EQV "

#: fortran/dump-parse-tree.c:458
#, c-format
msgid "NEQV "
msgstr "NEQV "

#: fortran/dump-parse-tree.c:461
#, c-format
msgid "= "
msgstr "= "

#: fortran/dump-parse-tree.c:464
#, c-format
msgid "<> "
msgstr "<> "

#: fortran/dump-parse-tree.c:467
#, c-format
msgid "> "
msgstr "> "

#: fortran/dump-parse-tree.c:470
#, c-format
msgid ">= "
msgstr ">= "

#: fortran/dump-parse-tree.c:473
#, c-format
msgid "< "
msgstr "< "

#: fortran/dump-parse-tree.c:476
#, c-format
msgid "<= "
msgstr "<= "

#: fortran/dump-parse-tree.c:479
#, c-format
msgid "NOT "
msgstr "NOT "

#: fortran/dump-parse-tree.c:482
#, c-format
msgid "parens"
msgstr ""

#: fortran/dump-parse-tree.c:504
#, c-format