# Traditional Chinese Messages for libc # Copyright (C) 2000, 05 Free Software Foundation, Inc. # Tung-Han Hsieh , 2000 # Yuan-Chung Cheng , 2000 # Wei-Lun Chao , 2005 # msgid "" msgstr "" "Project-Id-Version: libc 2.3.3\n" "POT-Creation-Date: 2009-02-06 12:40-0800\n" "PO-Revision-Date: 2005-07-26 11:27+0800\n" "Last-Translator: Wei-Lun Chao \n" "Language-Team: Chinese (traditional) \n" "X-Bugs: Report translation errors to the Language-Team address.\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=1; plural=0;\n" #: argp/argp-help.c:228 #, c-format msgid "%.*s: ARGP_HELP_FMT parameter requires a value" msgstr "%.*s: ARGP_HELP_FMT 參數需要一個值" #: argp/argp-help.c:238 #, c-format msgid "%.*s: Unknown ARGP_HELP_FMT parameter" msgstr "%.*s: 未知的 ARGP_HELP_FMT 參數" #: argp/argp-help.c:251 #, c-format msgid "Garbage in ARGP_HELP_FMT: %s" msgstr "ARGP_HELP_FMT 中無用的資訊: %s" #: argp/argp-help.c:1215 msgid "Mandatory or optional arguments to long options are also mandatory or optional for any corresponding short options." msgstr "長選項的必須或可選用的引數也是相對應短選項的必須或可選用的引數。" #: argp/argp-help.c:1601 msgid "Usage:" msgstr "使用方式:" #: argp/argp-help.c:1605 msgid " or: " msgstr " 或者: " #: argp/argp-help.c:1617 msgid " [OPTION...]" msgstr " [參數...]" #: argp/argp-help.c:1644 #, c-format msgid "Try `%s --help' or `%s --usage' for more information.\n" msgstr "請試著用 `%s --help' 或 `%s --usage' 來獲得更多相關訊息。\n" #: argp/argp-help.c:1672 #, c-format msgid "Report bugs to %s.\n" msgstr "請將程式問題回報至 %s。\n" #: argp/argp-parse.c:102 msgid "Give this help list" msgstr "給出這個使用方式列表" #: argp/argp-parse.c:103 msgid "Give a short usage message" msgstr "給出簡短的使用訊息" #: argp/argp-parse.c:104 msgid "Set the program name" msgstr "設定程式名稱" #: argp/argp-parse.c:106 msgid "Hang for SECS seconds (default 3600)" msgstr "SECS 秒後掛斷 (預設是 3600)" #: argp/argp-parse.c:167 msgid "Print program version" msgstr "印出程式版本" #: argp/argp-parse.c:183 msgid "(PROGRAM ERROR) No version known!?" msgstr "(程式錯誤) 沒有認得的版本!?" #: argp/argp-parse.c:623 #, c-format msgid "%s: Too many arguments\n" msgstr "%s: 太多的引數\n" #: argp/argp-parse.c:766 msgid "(PROGRAM ERROR) Option should have been recognized!?" msgstr "(程式錯誤) 選項應該已經可辯識!?" #: assert/assert-perr.c:57 #, c-format msgid "%s%s%s:%u: %s%sUnexpected error: %s.\n" msgstr "%s%s%s:%u: %s%s無法預料的錯誤: %s。\n" #: assert/assert.c:57 #, c-format msgid "%s%s%s:%u: %s%sAssertion `%s' failed.\n" msgstr "%s%s%s:%u: %s%sAssertion `%s' 失敗。\n" #: catgets/gencat.c:110 catgets/gencat.c:114 nscd/nscd.c:100 nss/makedb.c:61 msgid "NAME" msgstr "名稱" #: catgets/gencat.c:111 msgid "Create C header file NAME containing symbol definitions" msgstr "產生的 C 標頭檔名內含符號定義" #: catgets/gencat.c:113 msgid "Do not use existing catalog, force new output file" msgstr "不使用現存的 catalog, 強制使用新的輸出檔" #: catgets/gencat.c:114 nss/makedb.c:61 msgid "Write output to file NAME" msgstr "將輸出寫到檔案 NAME 中" #: catgets/gencat.c:119 msgid "" "Generate message catalog.\vIf INPUT-FILE is -, input is read from standard input. If OUTPUT-FILE\n" "is -, output is written to standard output.\n" msgstr "" "產生訊息 catelog。\\v如果輸入檔名是 -, 將從標準輸入讀取輸入。\n" "如果輸出檔名是 -, 則輸出將寫到標準輸出去。\n" #: catgets/gencat.c:124 msgid "" "-o OUTPUT-FILE [INPUT-FILE]...\n" "[OUTPUT-FILE [INPUT-FILE]...]" msgstr "" "-o 輸出檔案名稱 [輸入檔案名稱]...\n" "[輸出檔案名稱 [輸入檔案名稱]...]" #: catgets/gencat.c:232 debug/pcprofiledump.c:208 debug/xtrace.sh:58 #: elf/ldconfig.c:302 elf/ldd.bash.in:56 elf/sln.c:86 elf/sprof.c:360 #: iconv/iconv_prog.c:408 iconv/iconvconfig.c:380 locale/programs/locale.c:278 #: locale/programs/localedef.c:371 login/programs/pt_chown.c:88 #: malloc/memusage.sh:65 malloc/memusagestat.c:533 nscd/nscd.c:415 #: nss/getent.c:842 nss/makedb.c:231 posix/getconf.c:1030 #: sunrpc/rpc_main.c:1494 sunrpc/rpcinfo.c:699 #: sysdeps/unix/sysv/linux/lddlibc4.c:62 #, c-format msgid "" "For bug reporting instructions, please see:\n" ".\n" msgstr "" #: catgets/gencat.c:246 debug/pcprofiledump.c:222 debug/xtrace.sh:66 #: elf/ldconfig.c:316 elf/ldd.bash.in:39 elf/sprof.c:375 #: iconv/iconv_prog.c:423 iconv/iconvconfig.c:395 locale/programs/locale.c:293 #: locale/programs/localedef.c:387 login/programs/pt_chown.c:59 #: malloc/memusage.sh:73 malloc/memusagestat.c:551 nscd/nscd.c:429 #: nss/getent.c:81 nss/makedb.c:245 posix/getconf.c:1012 #: sysdeps/unix/sysv/linux/lddlibc4.c:69 #, c-format msgid "" "Copyright (C) %s Free Software Foundation, Inc.\n" "This is free software; see the source for copying conditions. There is NO\n" "warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.\n" msgstr "" "版權所有 (C) %s 自由軟體基金會。\n" "這是一個自由軟體；請見源始碼的授權條款。這沒有擔保；甚至也沒有專為銷\n" "售或者適合某些特殊目的。\n" #: catgets/gencat.c:251 debug/pcprofiledump.c:227 debug/xtrace.sh:70 #: elf/ldconfig.c:321 elf/sprof.c:381 iconv/iconv_prog.c:428 #: iconv/iconvconfig.c:400 locale/programs/locale.c:298 #: locale/programs/localedef.c:392 malloc/memusage.sh:77 #: malloc/memusagestat.c:556 nscd/nscd.c:434 nss/getent.c:86 nss/makedb.c:250 #: posix/getconf.c:1017 #, c-format msgid "Written by %s.\n" msgstr "作者 %s。\n" #: catgets/gencat.c:282 msgid "*standard input*" msgstr "*標準輸入*" #: catgets/gencat.c:288 iconv/iconv_charmap.c:170 iconv/iconv_prog.c:294 #: nss/makedb.c:170 #, c-format msgid "cannot open input file `%s'" msgstr "無法開啟輸入檔 `%s'" #: catgets/gencat.c:417 catgets/gencat.c:494 msgid "illegal set number" msgstr "不合法的集合編號" #: catgets/gencat.c:444 msgid "duplicate set definition" msgstr "複製集合定義" #: catgets/gencat.c:446 catgets/gencat.c:623 catgets/gencat.c:677 msgid "this is the first definition" msgstr "此為第一個定義" #: catgets/gencat.c:522 #, c-format msgid "unknown set `%s'" msgstr "不明的集合 `%s'" #: catgets/gencat.c:563 msgid "invalid quote character" msgstr "不適用的引用字元" #: catgets/gencat.c:576 #, c-format msgid "unknown directive `%s': line ignored" msgstr "不明的指令 `%s': 此行忽略" #: catgets/gencat.c:621 msgid "duplicated message number" msgstr "重複的訊息編號" #: catgets/gencat.c:674 msgid "duplicated message identifier" msgstr "重複的訊息識別符號" #: catgets/gencat.c:731 msgid "invalid character: message ignored" msgstr "不適用的字元: 忽略此訊息" #: catgets/gencat.c:774 msgid "invalid line" msgstr "無效的輸入列" #: catgets/gencat.c:828 msgid "malformed line ignored" msgstr "忽略奇怪的行" #: catgets/gencat.c:992 catgets/gencat.c:1033 nss/makedb.c:183 #, c-format msgid "cannot open output file `%s'" msgstr "無法開啟輸出檔 `%s'" #: catgets/gencat.c:1195 locale/programs/linereader.c:560 msgid "invalid escape sequence" msgstr "無效的跳脫序列" #: catgets/gencat.c:1217 msgid "unterminated message" msgstr "沒有結尾的訊息" #: catgets/gencat.c:1241 #, c-format msgid "while opening old catalog file" msgstr "在開啟舊的類別檔案時" #: catgets/gencat.c:1332 #, c-format msgid "conversion modules not available" msgstr "轉換模組不存在" #: catgets/gencat.c:1358 #, c-format msgid "cannot determine escape character" msgstr "無法決定跳脫 (escape) 字元" #: debug/pcprofiledump.c:53 msgid "Don't buffer output" msgstr "不要將輸入存入緩衝區" #: debug/pcprofiledump.c:58 msgid "Dump information generated by PC profiling." msgstr "將產生於 PC 測速評估的資料傾卸出來" #: debug/pcprofiledump.c:61 msgid "[FILE]" msgstr "[檔案]" #: debug/pcprofiledump.c:108 #, c-format msgid "cannot open input file" msgstr "無法開啟輸入檔" #: debug/pcprofiledump.c:115 #, c-format msgid "cannot read header" msgstr "無法讀取標頭資料" #: debug/pcprofiledump.c:179 #, c-format msgid "invalid pointer size" msgstr "無效的指標大小" #: debug/xtrace.sh:27 debug/xtrace.sh:45 msgid "Usage: xtrace [OPTION]... PROGRAM [PROGRAMOPTION]...\\n" msgstr "" #: debug/xtrace.sh:33 #, fuzzy msgid "Try \\`xtrace --help' for more information.\\n" msgstr "請試著用 `%s --help' 或 `%s --usage' 來獲得更多相關訊息。\n" #: debug/xtrace.sh:39 #, fuzzy msgid "xtrace: option \\`$1' requires an argument.\\n" msgstr "%s: 選項 `%s' 需要一個引數\n" #: debug/xtrace.sh:46 msgid "" "Trace execution of program by printing currently executed function.\n" "\n" " --data=FILE Don't run the program, just print the data from FILE.\n" "\n" " -?,--help Print this help and exit\n" " --usage Give a short usage message\n" " -V,--version Print version information and exit\n" "\n" "Mandatory arguments to long options are also mandatory for any corresponding\n" "short options.\n" "\n" msgstr "" #: debug/xtrace.sh:127 #, fuzzy msgid "xtrace: unrecognized option \\`$1'\\n" msgstr "%s: 未知的選項 `--%s'\n" #: debug/xtrace.sh:140 #, fuzzy msgid "No program name given\\n" msgstr "並不是一個命名檔案" #: debug/xtrace.sh:148 #, sh-format msgid "executable \\`$program' not found\\n" msgstr "" #: debug/xtrace.sh:152 #, fuzzy, sh-format msgid "\\`$program' is no executable\\n" msgstr "程式 %lu 不存在\n" #: dlfcn/dlinfo.c:64 msgid "RTLD_SELF used in code not dynamically loaded" msgstr "程式碼所使用的 RTLD_SELF 沒有動態載入" #: dlfcn/dlinfo.c:73 msgid "unsupported dlinfo request" msgstr "未支援的 dlinfo 請求" #: dlfcn/dlmopen.c:64 #, fuzzy msgid "invalid namespace" msgstr "無效的輸入列" #: dlfcn/dlmopen.c:69 #, fuzzy msgid "invalid mode" msgstr "無效的輸入列" #: dlfcn/dlopen.c:65 #, fuzzy msgid "invalid mode parameter" msgstr "不適用的引用字元" #: elf/cache.c:69 msgid "unknown" msgstr "未知" #: elf/cache.c:112 msgid "Unknown OS" msgstr "未知的作業系統" #: elf/cache.c:117 #, c-format msgid ", OS ABI: %s %d.%d.%d" msgstr ", OS ABI: %s %d.%d.%d" #: elf/cache.c:134 elf/ldconfig.c:1289 #, c-format msgid "Can't open cache file %s\n" msgstr "無法開啟快取檔 %s\n" #: elf/cache.c:148 #, c-format msgid "mmap of cache file failed.\n" msgstr "快取檔案 mmap 失敗。\n" #: elf/cache.c:152 elf/cache.c:166 #, c-format msgid "File is not a cache file.\n" msgstr "檔案並非快取檔。\n" #: elf/cache.c:199 elf/cache.c:209 #, c-format msgid "%d libs found in cache `%s'\n" msgstr "%d 函式庫在快取 `%s' 中找到\n" #: elf/cache.c:403 #, c-format msgid "Can't create temporary cache file %s" msgstr "無法產生暫時的快取檔 %s" #: elf/cache.c:411 elf/cache.c:421 elf/cache.c:425 elf/cache.c:430 #, c-format msgid "Writing of cache data failed" msgstr "寫入快取資料時發生錯誤" #: elf/cache.c:435 #, c-format msgid "Changing access rights of %s to %#o failed" msgstr "更改 %s 的存取權限為 %#o 失敗" #: elf/cache.c:440 #, c-format msgid "Renaming of %s to %s failed" msgstr "將 %s 改名為 %s 失敗" #: elf/dl-close.c:378 elf/dl-open.c:460 msgid "cannot create scope list" msgstr "無法建立作用域列表" #: elf/dl-close.c:725 msgid "shared object not open" msgstr "共用目的檔案沒有開啟" #: elf/dl-deps.c:114 msgid "DST not allowed in SUID/SGID programs" msgstr "DST 不允許在 SUID/SGID 的程式中" #: elf/dl-deps.c:127 elf/dl-open.c:282 msgid "empty dynamic string token substitution" msgstr "空的動態字串記號替換" #: elf/dl-deps.c:133 #, c-format msgid "cannot load auxiliary `%s' because of empty dynamic string token substitution\n" msgstr "由於空的動態字串記號替換而無法載入外部的 `%s'\n" #: elf/dl-deps.c:474 msgid "cannot allocate dependency list" msgstr "無法配置相關性列表" #: elf/dl-deps.c:510 elf/dl-deps.c:565 msgid "cannot allocate symbol search list" msgstr "無法配置符號搜尋列表" #: elf/dl-deps.c:550 msgid "Filters not supported with LD_TRACE_PRELINKING" msgstr "過濾程式不支援與 LD_TRACE_PRELINKING 共用" #: elf/dl-error.c:77 msgid "DYNAMIC LINKER BUG!!!" msgstr "動態連接程式有問題!!!" #: elf/dl-error.c:124 msgid "error while loading shared libraries" msgstr "正在載入共用函式庫時發生錯誤" #: elf/dl-fptr.c:88 #, fuzzy msgid "cannot map pages for fdesc table" msgstr "無法配置版本參照表" #: elf/dl-fptr.c:192 #, fuzzy msgid "cannot map pages for fptr table" msgstr "無法映射語區資料保存檔" #: elf/dl-fptr.c:221 msgid "internal error: symidx out of range of fptr table" msgstr "" #: elf/dl-load.c:372 msgid "cannot allocate name record" msgstr "無法配置名稱紀錄" #: elf/dl-load.c:474 elf/dl-load.c:582 elf/dl-load.c:667 elf/dl-load.c:780 msgid "cannot create cache for search path" msgstr "無法為搜尋路徑建立快取" #: elf/dl-load.c:565 msgid "cannot create RUNPATH/RPATH copy" msgstr "無法建立 RUNPATH/RPATH 的副本" #: elf/dl-load.c:653 msgid "cannot create search path array" msgstr "無法建立搜尋路徑陣列" #: elf/dl-load.c:864 msgid "cannot stat shared object" msgstr "無法 stat 共用目的檔" #: elf/dl-load.c:934 msgid "cannot open zero fill device" msgstr "無法開啟以零填滿的裝置" #: elf/dl-load.c:979 elf/dl-load.c:2215 msgid "cannot create shared object descriptor" msgstr "無法建立共用目的檔敘述項" #: elf/dl-load.c:998 elf/dl-load.c:1647 elf/dl-load.c:1739 msgid "cannot read file data" msgstr "無法讀取檔案資料" #: elf/dl-load.c:1042 msgid "ELF load command alignment not page-aligned" msgstr "ELF 載入命令對齊並沒有按照記憶體分頁 (page) 對齊" #: elf/dl-load.c:1049 msgid "ELF load command address/offset not properly aligned" msgstr "ELF 載入命令位址/位移並沒有適當地對齊" #: elf/dl-load.c:1132 msgid "cannot allocate TLS data structures for initial thread" msgstr "無法配置 TLS 資料結構用以起始執行緒" #: elf/dl-load.c:1155 msgid "cannot handle TLS data" msgstr "無法處理 TLS 資料" #: elf/dl-load.c:1174 msgid "object file has no loadable segments" msgstr "目的檔中沒有可載入的節區" #: elf/dl-load.c:1210 msgid "failed to map segment from shared object" msgstr "從共用目的檔中對映區段失敗" #: elf/dl-load.c:1236 msgid "cannot dynamically load executable" msgstr "無法動態載入執行檔" #: elf/dl-load.c:1298 msgid "cannot change memory protections" msgstr "無法改變記憶體保護狀態" #: elf/dl-load.c:1317 msgid "cannot map zero-fill pages" msgstr "無法對應以零填滿的分頁區" #: elf/dl-load.c:1331 msgid "object file has no dynamic section" msgstr "共用目的檔中沒有動態節區" #: elf/dl-load.c:1354 msgid "shared object cannot be dlopen()ed" msgstr "共用目的檔無法被 dlopen()" #: elf/dl-load.c:1367 msgid "cannot allocate memory for program header" msgstr "無法配置記憶體給程式標頭區使用" #: elf/dl-load.c:1384 elf/dl-open.c:218 #, fuzzy msgid "invalid caller" msgstr "無效的輸入列" #: elf/dl-load.c:1423 msgid "cannot enable executable stack as shared object requires" msgstr "無法開啟可執行堆疊做為共用目的檔" #: elf/dl-load.c:1436 #, fuzzy msgid "cannot close file descriptor" msgstr "無法建立內部敘述項" #: elf/dl-load.c:1647 msgid "file too short" msgstr "檔案太小" #: elf/dl-load.c:1676 msgid "invalid ELF header" msgstr "無效的 ELF 標頭" #: elf/dl-load.c:1688 msgid "ELF file data encoding not big-endian" msgstr "ELF 檔資料編碼並非大尾序" #: elf/dl-load.c:1690 msgid "ELF file data encoding not little-endian" msgstr "ELF 檔資料編碼並非小尾序" #: elf/dl-load.c:1694 msgid "ELF file version ident does not match current one" msgstr "ELF 檔版本 ident 不符合目前所使用的" #: elf/dl-load.c:1698 msgid "ELF file OS ABI invalid" msgstr "ELF 檔 OS ABI 版本不適用" #: elf/dl-load.c:1700 msgid "ELF file ABI version invalid" msgstr "ELF 檔 ABI 版本不適用" #: elf/dl-load.c:1703 msgid "internal error" msgstr "內部錯誤" #: elf/dl-load.c:1710 msgid "ELF file version does not match current one" msgstr "ELF 檔版本不符合目前的版本" #: elf/dl-load.c:1718 msgid "only ET_DYN and ET_EXEC can be loaded" msgstr "只有 ET_DYN 以及 ET_EXEC 可以載入" #: elf/dl-load.c:1724 msgid "ELF file's phentsize not the expected size" msgstr "ELF 檔的 phentsize 並不是預期中的大小" #: elf/dl-load.c:2231 msgid "wrong ELF class: ELFCLASS64" msgstr "" #: elf/dl-load.c:2232 msgid "wrong ELF class: ELFCLASS32" msgstr "" #: elf/dl-load.c:2235 msgid "cannot open shared object file" msgstr "無法開啟共用目的檔" #: elf/dl-lookup.c:356 msgid "relocation error" msgstr "重定址錯誤" #: elf/dl-lookup.c:384 msgid "symbol lookup error" msgstr "" #: elf/dl-open.c:114 msgid "cannot extend global scope" msgstr "無法延展全域變數的作用域" #: elf/dl-open.c:512 #, fuzzy msgid "TLS generation counter wrapped! Please report this." msgstr "TLS 產生計數器已被轉包! 請寄出以 'glibcbug' 命令稿所做的報告。" #: elf/dl-open.c:549 msgid "invalid mode for dlopen()" msgstr "無效的 dlopen() 模式" #: elf/dl-open.c:566 msgid "no more namespaces available for dlmopen()" msgstr "" #: elf/dl-open.c:579 #, fuzzy msgid "invalid target namespace in dlmopen()" msgstr "無效的 dlopen() 模式" #: elf/dl-reloc.c:121 msgid "cannot allocate memory in static TLS block" msgstr "無法在靜態 TLS 區塊中配置記憶體" #: elf/dl-reloc.c:211 msgid "cannot make segment writable for relocation" msgstr "在重新定址以後無法將區段設為可寫入狀態" #: elf/dl-reloc.c:277 #, fuzzy, c-format msgid "%s: no PLTREL found in object %s\n" msgstr "%s: 描述程式在目的檔 %s 中沒有找到 PLTREL\n" #: elf/dl-reloc.c:288 #, c-format msgid "%s: out of memory to store relocation results for %s\n" msgstr "" #: elf/dl-reloc.c:304 msgid "cannot restore segment prot after reloc" msgstr "在 reloc 之後無法復原 segment prot" #: elf/dl-reloc.c:329 #, fuzzy msgid "cannot apply additional memory protection after relocation" msgstr "無法改變記憶體保護狀態" #: elf/dl-sym.c:162 msgid "RTLD_NEXT used in code not dynamically loaded" msgstr "程式碼所使用的 RTLD_NEXT 沒有動態載入" #: elf/dl-sysdep.c:481 elf/dl-sysdep.c:493 msgid "cannot create capability list" msgstr "無法建立 capability 列表" #: elf/dl-tls.c:864 msgid "cannot create TLS data structures" msgstr "無法建立 TLS 資料結構" #: elf/dl-version.c:303 msgid "cannot allocate version reference table" msgstr "無法配置版本參照表" #: elf/ldconfig.c:141 msgid "Print cache" msgstr "列印快取" #: elf/ldconfig.c:142 msgid "Generate verbose messages" msgstr "產生更多的訊息" #: elf/ldconfig.c:143 msgid "Don't build cache" msgstr "不建立快取" #: elf/ldconfig.c:144 msgid "Don't generate links" msgstr "不產生連結" #: elf/ldconfig.c:145 msgid "Change to and use ROOT as root directory" msgstr "變換到 ROOT 目錄並以它做為根目錄" #: elf/ldconfig.c:145 msgid "ROOT" msgstr "" #: elf/ldconfig.c:146 msgid "CACHE" msgstr "" #: elf/ldconfig.c:146 msgid "Use CACHE as cache file" msgstr "使用 CACHE 當作快取檔案" #: elf/ldconfig.c:147 msgid "CONF" msgstr "" #: elf/ldconfig.c:147 msgid "Use CONF as configuration file" msgstr "使用 CONF 當作設定檔" #: elf/ldconfig.c:148 msgid "Only process directories specified on the command line. Don't build cache." msgstr "只處理在命令列引數中有指定的目錄，不建立快取檔案。" #: elf/ldconfig.c:149 msgid "Manually link individual libraries." msgstr "手動個別連結函式庫" #: elf/ldconfig.c:150 msgid "FORMAT" msgstr "" #: elf/ldconfig.c:150 msgid "Format to use: new, old or compat (default)" msgstr "將使用格式: 新、舊或相容 (預設)" #: elf/ldconfig.c:151 #, fuzzy msgid "Ignore auxiliary cache file" msgstr "並非正常的檔案" #: elf/ldconfig.c:159 msgid "Configure Dynamic Linker Run Time Bindings." msgstr "設定執行時期動態連接" #: elf/ldconfig.c:339 #, c-format msgid "Path `%s' given more than once" msgstr "路徑 `%s' 使用超過一次" #: elf/ldconfig.c:379 #, c-format msgid "%s is not a known library type" msgstr "%s 不是一個已知的函式庫型態" #: elf/ldconfig.c:404 #, c-format msgid "Can't stat %s" msgstr "無法 stat %s" #: elf/ldconfig.c:478 #, c-format msgid "Can't stat %s\n" msgstr "無法 stat %s\n" #: elf/ldconfig.c:488 #, c-format msgid "%s is not a symbolic link\n" msgstr "%s 不是一個符號連接檔\n" #: elf/ldconfig.c:507 #, c-format msgid "Can't unlink %s" msgstr "無法取消連結 %s" #: elf/ldconfig.c:513 #, c-format msgid "Can't link %s to %s" msgstr "無法從 %s 連結到 %s" #: elf/ldconfig.c:519 msgid " (changed)\n" msgstr " (已改變)\n" #: elf/ldconfig.c:521 msgid " (SKIPPED)\n" msgstr " (忽略)\n" #: elf/ldconfig.c:576 #, c-format msgid "Can't find %s" msgstr "找不到 %s" #: elf/ldconfig.c:592 elf/ldconfig.c:765 elf/ldconfig.c:813 elf/ldconfig.c:847 #, c-format msgid "Cannot lstat %s" msgstr "無法 lstat %s" #: elf/ldconfig.c:599 #, c-format msgid "Ignored file %s since it is not a regular file." msgstr "忽略檔案 %s 因為它不是一個正常的檔案。" #: elf/ldconfig.c:608 #, c-format msgid "No link created since soname could not be found for %s" msgstr "由於找不到 %s 的共用目的檔名稱，連結並未被建立" #: elf/ldconfig.c:691 #, c-format msgid "Can't open directory %s" msgstr "無法開啟目錄 %s" #: elf/ldconfig.c:779 #, c-format msgid "Cannot stat %s" msgstr "無法 stat %s" #: elf/ldconfig.c:834 elf/readlib.c:91 #, c-format msgid "Input file %s not found.\n" msgstr "輸入檔 %s 找不到。\n" #: elf/ldconfig.c:908 #, c-format msgid "libc5 library %s in wrong directory" msgstr "libc5 函式庫 %s 擺錯目錄了" #: elf/ldconfig.c:911 #, c-format msgid "libc6 library %s in wrong directory" msgstr "libc6 函式庫 %s 擺錯目錄了" #: elf/ldconfig.c:914 #, c-format msgid "libc4 library %s in wrong directory" msgstr "libc4 函式庫 %s 擺錯目錄了" #: elf/ldconfig.c:942 #, c-format msgid "libraries %s and %s in directory %s have same soname but different type." msgstr "函式庫 %s 跟 %s (在目錄 %s 底下) 有共同的共用函式庫名稱，不過其格式卻不同" #: elf/ldconfig.c:1051 #, c-format msgid "Can't open configuration file %s" msgstr "無法開啟設定檔 %s" #: elf/ldconfig.c:1115 #, c-format msgid "%s:%u: bad syntax in hwcap line" msgstr "" #: elf/ldconfig.c:1121 #, c-format msgid "%s:%u: hwcap index %lu above maximum %u" msgstr "" #: elf/ldconfig.c:1128 elf/ldconfig.c:1136 #, fuzzy, c-format msgid "%s:%u: hwcap index %lu already defined as %s" msgstr "%s: `%.*s' 的順序已在 %s:%Zu 中定義" #: elf/ldconfig.c:1139 #, c-format msgid "%s:%u: duplicate hwcap %lu %s" msgstr "" #: elf/ldconfig.c:1161 #, c-format msgid "need absolute file name for configuration file when using -r" msgstr "" #: elf/ldconfig.c:1168 locale/programs/xmalloc.c:70 malloc/obstack.c:434 #: malloc/obstack.c:436 posix/getconf.c:985 posix/getconf.c:1177 #, c-format msgid "memory exhausted" msgstr "記憶體耗盡" #: elf/ldconfig.c:1198 #, fuzzy, c-format msgid "%s:%u: cannot read directory %s" msgstr "%s: 無法建立目錄 %s: %s\n" #: elf/ldconfig.c:1242 #, c-format msgid "relative path `%s' used to build cache" msgstr "用來建置快取的相對路徑 `%s'" #: elf/ldconfig.c:1268 #, c-format msgid "Can't chdir to /" msgstr "無法變更目錄到 /" #: elf/ldconfig.c:1310 #, c-format msgid "Can't open cache file directory %s\n" msgstr "無法開啟快取檔案目錄 %s\n" #: elf/ldd.bash.in:43 #, fuzzy msgid "Written by %s and %s.\n" msgstr "作者 %s。\n" #: elf/ldd.bash.in:48 msgid "" "Usage: ldd [OPTION]... FILE...\n" " --help print this help and exit\n" " --version print version information and exit\n" " -d, --data-relocs process data relocations\n" " -r, --function-relocs process data and function relocations\n" " -u, --unused print unused direct dependencies\n" " -v, --verbose print all information\n" msgstr "" #: elf/ldd.bash.in:82 #, fuzzy msgid "ldd: option \\`$1' is ambiguous" msgstr "%s: 選項 `%s' 含義不清\n" #: elf/ldd.bash.in:89 #, fuzzy msgid "unrecognized option" msgstr "%s: 未知的選項 `--%s'\n" #: elf/ldd.bash.in:90 elf/ldd.bash.in:128 #, fuzzy msgid "Try \\`ldd --help' for more information." msgstr "請試著用 `%s --help' 或 `%s --usage' 來獲得更多相關訊息。\n" #: elf/ldd.bash.in:127 #, fuzzy msgid "missing file arguments" msgstr "無法釋放參數" #. TRANS No such file or directory. This is a ``file doesn't exist'' error #. TRANS for ordinary files that are referenced in contexts where they are #. TRANS expected to already exist. #: elf/ldd.bash.in:150 sysdeps/gnu/errlist.c:36 msgid "No such file or directory" msgstr "沒有此一檔案或目錄" #: elf/ldd.bash.in:153 inet/rcmd.c:483 msgid "not regular file" msgstr "並非正常的檔案" #: elf/ldd.bash.in:156 msgid "warning: you do not have execution permission for" msgstr "" #: elf/ldd.bash.in:185 #, fuzzy msgid "\tnot a dynamic executable" msgstr "無法動態載入執行檔" #: elf/ldd.bash.in:193 msgid "exited with unknown exit code" msgstr "" #: elf/ldd.bash.in:198 msgid "error: you do not have read permission for" msgstr "" #: elf/readelflib.c:35 #, c-format msgid "file %s is truncated\n" msgstr "檔案 %s 已截短\n" #: elf/readelflib.c:67 #, c-format msgid "%s is a 32 bit ELF file.\n" msgstr "%s 是一個 32 位元的 ELF 檔案。\n" #: elf/readelflib.c:69 #, c-format msgid "%s is a 64 bit ELF file.\n" msgstr "%s 是一個 64 位元的 ELF 檔案。\n" #: elf/readelflib.c:71 #, c-format msgid "Unknown ELFCLASS in file %s.\n" msgstr "檔案 %s 中未知的 ELFCLASS。\n" #: elf/readelflib.c:78 #, c-format msgid "%s is not a shared object file (Type: %d).\n" msgstr "%s 不是一個共用目的檔 (型態: %d)。\n" #: elf/readelflib.c:109 #, c-format msgid "more than one dynamic segment\n" msgstr "超過一個的動態區段\n" #: elf/readlib.c:97 #, c-format msgid "Cannot fstat file %s.\n" msgstr "無法 fstat 檔案 %s。\n" #: elf/readlib.c:108 #, fuzzy, c-format msgid "File %s is empty, not checked." msgstr "檔案 %s 太小，不做檢查。" #: elf/readlib.c:114 #, c-format msgid "File %s is too small, not checked." msgstr "檔案 %s 太小，不做檢查。" #: elf/readlib.c:124 #, c-format msgid "Cannot mmap file %s.\n" msgstr "無法 mmap 檔案 %s。\n" #: elf/readlib.c:162 #, c-format msgid "%s is not an ELF file - it has the wrong magic bytes at the start.\n" msgstr "%s 不是一個 ELF 檔 - 其開頭的魔術位元組是錯的。\n" #: elf/sln.c:85 #, fuzzy, c-format msgid "" "Usage: sln src dest|file\n" "\n" msgstr "用法: %s infile\n" #: elf/sln.c:110 #, fuzzy, c-format msgid "%s: file open error: %m\n" msgstr "%s: 無法開啟 %s: %m\n" #: elf/sln.c:147 #, c-format msgid "No target in line %d\n" msgstr "" #: elf/sln.c:179 #, fuzzy, c-format msgid "%s: destination must not be a directory\n" msgstr "%s: 欄位 `%s' 不可以空白" #: elf/sln.c:185 #, c-format msgid "%s: failed to remove the old destination\n" msgstr "" #: elf/sln.c:193 #, fuzzy, c-format msgid "%s: invalid destination: %s\n" msgstr "%s: 不適用的選項 -- %c\n" #: elf/sln.c:208 elf/sln.c:217 #, fuzzy, c-format msgid "Invalid link from \"%s\" to \"%s\": %s\n" msgstr "%s: 無法從 %s 連結到 %s: %s\n" #: elf/sprof.c:77 msgid "Output selection:" msgstr "輸出選擇:" #: elf/sprof.c:79 msgid "print list of count paths and their number of use" msgstr "列出計數的路徑以及它們使用的次數" #: elf/sprof.c:81 msgid "generate flat profile with counts and ticks" msgstr "從執行次數與經歷時間的資料中產生直接的測速結果" #: elf/sprof.c:82 msgid "generate call graph" msgstr "產生函式呼叫圖形" #: elf/sprof.c:89 #, fuzzy msgid "Read and display shared object profiling data." msgstr "讀取並顯示共用函式的測速評估資料" #: elf/sprof.c:94 msgid "SHOBJ [PROFDATA]" msgstr "SHOBJ [PROFDATA]" #: elf/sprof.c:420 #, c-format msgid "failed to load shared object `%s'" msgstr "開啟共用目的檔 `%s' 失敗" #: elf/sprof.c:429 #, c-format msgid "cannot create internal descriptors" msgstr "無法建立內部敘述項" #: elf/sprof.c:548 #, c-format msgid "Reopening shared object `%s' failed" msgstr "重新開啟共用目的檔 %s 失敗" #: elf/sprof.c:555 elf/sprof.c:649 #, fuzzy, c-format msgid "reading of section headers failed" msgstr "映射結區標頭失敗" #: elf/sprof.c:563 elf/sprof.c:657 #, fuzzy, c-format msgid "reading of section header string table failed" msgstr "映射結區的標頭字串表格失敗" #: elf/sprof.c:589 #, c-format msgid "*** Cannot read debuginfo file name: %m\n" msgstr "" #: elf/sprof.c:609 #, fuzzy, c-format msgid "cannot determine file name" msgstr "無法決定跳脫 (escape) 字元" #: elf/sprof.c:642 #, fuzzy, c-format msgid "reading of ELF header failed" msgstr "映射結區標頭失敗" #: elf/sprof.c:678 #, c-format msgid "*** The file `%s' is stripped: no detailed analysis possible\n" msgstr "*** 檔案 `%s' 被裁剪了: 無法做詳細的分析\n" #: elf/sprof.c:708 #, c-format msgid "failed to load symbol data" msgstr "載入函式符號資料失敗" #: elf/sprof.c:775 #, c-format msgid "cannot load profiling data" msgstr "無法載入測試資料" #: elf/sprof.c:784 #, c-format msgid "while stat'ing profiling data file" msgstr "在對測試資料檔案進行統計的時候" #: elf/sprof.c:792 #, c-format msgid "profiling data file `%s' does not match shared object `%s'" msgstr "測試資料檔 `%s' 與共用目的檔 `%s' 不符合" #: elf/sprof.c:803 #, c-format msgid "failed to mmap the profiling data file" msgstr "測試資料檔案 mmap 失敗" #: elf/sprof.c:811 #, c-format msgid "error while closing the profiling data file" msgstr "正在關閉測試資料檔案時發生錯誤" #: elf/sprof.c:820 elf/sprof.c:890 #, c-format msgid "cannot create internal descriptor" msgstr "無法建立內部敘述項" #: elf/sprof.c:866 #, c-format msgid "`%s' is no correct profile data file for `%s'" msgstr "`%s' 不是 `%s' 中正確的測速評估資料檔" #: elf/sprof.c:1047 elf/sprof.c:1105 #, c-format msgid "cannot allocate symbol data" msgstr "無法配置函式符號資料" #: iconv/iconv_charmap.c:142 iconv/iconv_prog.c:446 #, c-format msgid "cannot open output file" msgstr "無法開啟輸出檔" #: iconv/iconv_charmap.c:188 iconv/iconv_prog.c:312 #, c-format msgid "error while closing input `%s'" msgstr "正在關閉輸入 `%s' 的時候發生錯誤" #: iconv/iconv_charmap.c:462 #, c-format msgid "illegal input sequence at position %Zd" msgstr "位置 %Zd 有不合法的輸入序列" #: iconv/iconv_charmap.c:481 iconv/iconv_prog.c:537 #, c-format msgid "incomplete character or shift sequence at end of buffer" msgstr "緩衝區結尾有不完全的字元或 shift sequence" #: iconv/iconv_charmap.c:526 iconv/iconv_charmap.c:562 iconv/iconv_prog.c:580 #: iconv/iconv_prog.c:616 #, c-format msgid "error while reading the input" msgstr "正在讀入資料的時候發生錯誤" #: iconv/iconv_charmap.c:544 iconv/iconv_prog.c:598 #, c-format msgid "unable to allocate buffer for input" msgstr "無法配置輸入用的緩衝區" #: iconv/iconv_prog.c:60 msgid "Input/Output format specification:" msgstr "輸入/輸出格式設定:" #: iconv/iconv_prog.c:61 msgid "encoding of original text" msgstr "原始文字的編碼" #: iconv/iconv_prog.c:62 msgid "encoding for output" msgstr "用來輸出的編碼" #: iconv/iconv_prog.c:63 msgid "Information:" msgstr "資料:" #: iconv/iconv_prog.c:64 msgid "list all known coded character sets" msgstr "列出所有已知的編碼字元集" #: iconv/iconv_prog.c:65 locale/programs/localedef.c:127 msgid "Output control:" msgstr "輸出控制:" #: iconv/iconv_prog.c:66 msgid "omit invalid characters from output" msgstr "省略無效字元的輸出" #: iconv/iconv_prog.c:67 msgid "output file" msgstr "輸出檔案" #: iconv/iconv_prog.c:68 msgid "suppress warnings" msgstr "停止輸出警告訊息" #: iconv/iconv_prog.c:69 msgid "print progress information" msgstr "印出程序相關資訊" #: iconv/iconv_prog.c:74 msgid "Convert encoding of given files from one encoding to another." msgstr "從給定的檔案的字元編碼轉換到另一個" #: iconv/iconv_prog.c:78 msgid "[FILE...]" msgstr "[FILE...]" #: iconv/iconv_prog.c:234 #, fuzzy, c-format msgid "conversions from `%s' and to `%s' are not supported" msgstr "不支援從 `%s' 以及到 `%s' 的轉換" #: iconv/iconv_prog.c:239 #, c-format msgid "conversion from `%s' is not supported" msgstr "不支援從 `%s' 的轉換" #: iconv/iconv_prog.c:246 #, c-format msgid "conversion to `%s' is not supported" msgstr "不支援到 `%s' 的轉換" #: iconv/iconv_prog.c:250 #, c-format msgid "conversion from `%s' to `%s' is not supported" msgstr "不支援從 `%s' 到 `%s' 的轉換" #: iconv/iconv_prog.c:260 #, c-format msgid "failed to start conversion processing" msgstr "開始轉換程序失敗" #: iconv/iconv_prog.c:358 #, c-format msgid "error while closing output file" msgstr "正在關閉輸出檔案的時候發生錯誤" #: iconv/iconv_prog.c:456 #, c-format msgid "conversion stopped due to problem in writing the output" msgstr "因寫入輸出時發生錯誤而導致轉換停止" #: iconv/iconv_prog.c:533 #, c-format msgid "illegal input sequence at position %ld" msgstr "位置 %ld 有不合法的輸入序列" #: iconv/iconv_prog.c:541 #, c-format msgid "internal error (illegal descriptor)" msgstr "內部錯誤 (不合法的敘述項)" #: iconv/iconv_prog.c:544 #, c-format msgid "unknown iconv() error %d" msgstr "不明的 iconv() 錯誤 %d" #: iconv/iconv_prog.c:790 msgid "" "The following list contain all the coded character sets known. This does\n" "not necessarily mean that all combinations of these names can be used for\n" "the FROM and TO command line parameters. One coded character set can be\n" "listed with several different names (aliases).\n" "\n" " " msgstr "" "以下的列表包含所有已知的編碼字集，但這不代表所有的字集名稱組合皆可用於\n" "命令列的 \"來源\" 以及 \"目的\" 引數。一個編碼字集可以用幾個不同的名稱\n" "來表示 (即 \"匿名\")。\n" "\n" " " #: iconv/iconvconfig.c:110 msgid "Create fastloading iconv module configuration file." msgstr "建立快速載入 iconv 模組的設定檔案。" #: iconv/iconvconfig.c:114 msgid "[DIR...]" msgstr "[目錄...]" #: iconv/iconvconfig.c:127 msgid "Prefix used for all file accesses" msgstr "使用於所有檔案存取時的前置文字" #: iconv/iconvconfig.c:128 msgid "Put output in FILE instead of installed location (--prefix does not apply to FILE)" msgstr "" #: iconv/iconvconfig.c:132 msgid "Do not search standard directories, only those on the command line" msgstr "" #: iconv/iconvconfig.c:301 #, c-format msgid "Directory arguments required when using --nostdlib" msgstr "" #: iconv/iconvconfig.c:343 locale/programs/localedef.c:291 #, fuzzy, c-format msgid "no output file produced because warnings were issued" msgstr "因為發出過警告訊息，所以沒有製造任何輸出檔" #: iconv/iconvconfig.c:429 #, c-format msgid "while inserting in search tree" msgstr "當插入於搜尋樹之中" #: iconv/iconvconfig.c:1238 #, c-format msgid "cannot generate output file" msgstr "無法產生輸出檔" #: inet/rcmd.c:157 msgid "rcmd: Cannot allocate memory\n" msgstr "rcmd: 無法配置記憶體\n" #: inet/rcmd.c:172 msgid "rcmd: socket: All ports in use\n" msgstr "rcmd: socket: 所有的埠都在使用中\n" #: inet/rcmd.c:200 #, c-format msgid "connect to address %s: " msgstr "連接到位址 %s: " #: inet/rcmd.c:213 #, c-format msgid "Trying %s...\n" msgstr "嘗試 %s...\n" #: inet/rcmd.c:249 #, c-format msgid "rcmd: write (setting up stderr): %m\n" msgstr "rcmd: write (正在設定標準錯誤輸出): %m\n" #: inet/rcmd.c:265 #, c-format msgid "rcmd: poll (setting up stderr): %m\n" msgstr "rcmd: poll (正在設定標準錯誤輸出): %m\n" #: inet/rcmd.c:268 msgid "poll: protocol failure in circuit setup\n" msgstr "poll: 通訊協定在設定線路時失效\n" #: inet/rcmd.c:301 msgid "socket: protocol failure in circuit setup\n" msgstr "socket: 通訊協定在設定線路時失效\n" #: inet/rcmd.c:325 #, c-format msgid "rcmd: %s: short read" msgstr "rcmd: %s: 讀入資料過短" #: inet/rcmd.c:481 msgid "lstat failed" msgstr "lstat 失敗" #: inet/rcmd.c:488 msgid "cannot open" msgstr "無法開啟" #: inet/rcmd.c:490 msgid "fstat failed" msgstr "fstat 失敗" #: inet/rcmd.c:492 msgid "bad owner" msgstr "錯誤的擁有者" #: inet/rcmd.c:494 msgid "writeable by other than owner" msgstr "使用者以外的人亦可寫入" #: inet/rcmd.c:496 msgid "hard linked somewhere" msgstr "被實體連結到某處" #: inet/ruserpass.c:170 inet/ruserpass.c:193 msgid "out of memory" msgstr "記憶體不足" #: inet/ruserpass.c:184 msgid "Error: .netrc file is readable by others." msgstr "錯誤: .netrc 檔可以被別人讀取" #: inet/ruserpass.c:185 msgid "Remove password or make file unreadable by others." msgstr "移除密碼或讓他人無法讀取檔案" #: inet/ruserpass.c:277 #, c-format msgid "Unknown .netrc keyword %s" msgstr "未知的 .netrc 關鍵字 %s" #: libidn/nfkc.c:464 #, fuzzy msgid "Character out of range for UTF-8" msgstr "通道號碼超出範圍" #: locale/programs/charmap-dir.c:59 #, c-format msgid "cannot read character map directory `%s'" msgstr "無法讀取字集對照檔目錄 `%s'" #: locale/programs/charmap.c:138 #, c-format msgid "character map file `%s' not found" msgstr "找不到字集對照檔 `%s'" #: locale/programs/charmap.c:195 #, c-format msgid "default character map file `%s' not found" msgstr "找不到預設的字集對照檔 `%s'" #: locale/programs/charmap.c:258 #, c-format msgid "character map `%s' is not ASCII compatible, locale not ISO C compliant\n" msgstr "字元對應 `%s' 不是 ASCII 相容碼，區域化資料庫不符合 ISO C\n" #: locale/programs/charmap.c:337 #, c-format msgid "%s: must be greater than \n" msgstr "%s: 必須大於 \n" #: locale/programs/charmap.c:357 locale/programs/charmap.c:374 #: locale/programs/repertoire.c:174 #, c-format msgid "syntax error in prolog: %s" msgstr "prolog 中有語法錯誤: %s" #: locale/programs/charmap.c:358 msgid "invalid definition" msgstr "無效的定義" #: locale/programs/charmap.c:375 locale/programs/locfile.c:126 #: locale/programs/locfile.c:153 locale/programs/repertoire.c:175 msgid "bad argument" msgstr "錯誤的引數" #: locale/programs/charmap.c:403 #, c-format msgid "duplicate definition of <%s>" msgstr "<%s> 的定義重複了" #: locale/programs/charmap.c:410 #, c-format msgid "value for <%s> must be 1 or greater" msgstr "<%s> 的值必須為 1 或者更大" #: locale/programs/charmap.c:422 #, c-format msgid "value of <%s> must be greater or equal than the value of <%s>" msgstr "<%s> 的值必須等於或大於 <%s> 的值" #: locale/programs/charmap.c:445 locale/programs/repertoire.c:183 #, c-format msgid "argument to <%s> must be a single character" msgstr "給 <%s> 的引數必須是一個單字元" #: locale/programs/charmap.c:471 msgid "character sets with locking states are not supported" msgstr "不支援使用 locking 狀態的字元集" #: locale/programs/charmap.c:498 locale/programs/charmap.c:552 #: locale/programs/charmap.c:584 locale/programs/charmap.c:678 #: locale/programs/charmap.c:733 locale/programs/charmap.c:774 #: locale/programs/charmap.c:815 #, c-format msgid "syntax error in %s definition: %s" msgstr "定義 %s 的語法錯誤: %s" #: locale/programs/charmap.c:499 locale/programs/charmap.c:679 #: locale/programs/charmap.c:775 locale/programs/repertoire.c:230 msgid "no symbolic name given" msgstr "沒有給予符號名稱" #: locale/programs/charmap.c:553 msgid "invalid encoding given" msgstr "給予的編碼是無效的" #: locale/programs/charmap.c:562 msgid "too few bytes in character encoding" msgstr "字元定義中的位元組太少了" #: locale/programs/charmap.c:564 msgid "too many bytes in character encoding" msgstr "字元定義中的位元組太多了" #: locale/programs/charmap.c:586 locale/programs/charmap.c:734 #: locale/programs/charmap.c:817 locale/programs/repertoire.c:296 msgid "no symbolic name given for end of range" msgstr "沒有給此區的最後一個字元符號名稱" #: locale/programs/charmap.c:610 locale/programs/ld-address.c:602 #: locale/programs/ld-collate.c:2767 locale/programs/ld-collate.c:3924 #: locale/programs/ld-ctype.c:2232 locale/programs/ld-ctype.c:2984 #: locale/programs/ld-identification.c:452 #: locale/programs/ld-measurement.c:238 locale/programs/ld-messages.c:332 #: locale/programs/ld-monetary.c:943 locale/programs/ld-name.c:307 #: locale/programs/ld-numeric.c:368 locale/programs/ld-paper.c:241 #: locale/programs/ld-telephone.c:313 locale/programs/ld-time.c:1221 #: locale/programs/repertoire.c:313 #, c-format msgid "%1$s: definition does not end with `END %1$s'" msgstr "%1$s: 定義並沒有以 `END %1$s' 做為結束" #: locale/programs/charmap.c:643 msgid "only WIDTH definitions are allowed to follow the CHARMAP definition" msgstr "只有 WIDTH 定義才能直接寫在 CHARMAP 定義之後" #: locale/programs/charmap.c:651 locale/programs/charmap.c:714 #, c-format msgid "value for %s must be an integer" msgstr "%s 的值必須是整數才行" #: locale/programs/charmap.c:842 #, c-format msgid "%s: error in state machine" msgstr "%s: 狀態機錯誤" #: locale/programs/charmap.c:850 locale/programs/ld-address.c:618 #: locale/programs/ld-collate.c:2764 locale/programs/ld-collate.c:4117 #: locale/programs/ld-ctype.c:2229 locale/programs/ld-ctype.c:3001 #: locale/programs/ld-identification.c:468 #: locale/programs/ld-measurement.c:254 locale/programs/ld-messages.c:348 #: locale/programs/ld-monetary.c:959 locale/programs/ld-name.c:323 #: locale/programs/ld-numeric.c:384 locale/programs/ld-paper.c:257 #: locale/programs/ld-telephone.c:329 locale/programs/ld-time.c:1237 #: locale/programs/locfile.c:826 locale/programs/repertoire.c:324 #, c-format msgid "%s: premature end of file" msgstr "%s: 未完成已達檔案的末尾" #: locale/programs/charmap.c:869 locale/programs/charmap.c:880 #, c-format msgid "unknown character `%s'" msgstr "不明的字元 `%s'" #: locale/programs/charmap.c:888 #, c-format msgid "number of bytes for byte sequence of beginning and end of range not the same: %d vs %d" msgstr "在範圍起始與結束的位元組序列中，位元組的數目並不一致: %d vs %d" #: locale/programs/charmap.c:993 locale/programs/ld-collate.c:3044 #: locale/programs/repertoire.c:419 msgid "invalid names for character range" msgstr "無效的字元範圍名稱" #: locale/programs/charmap.c:1005 locale/programs/repertoire.c:431 msgid "hexadecimal range format should use only capital characters" msgstr "在表示十六進位的範圍時只能用大寫的英文字母表示" #: locale/programs/charmap.c:1023 locale/programs/repertoire.c:449 #, c-format msgid "<%s> and <%s> are invalid names for range" msgstr "<%s> 以及 <%s> 是不適用的範圍名稱" #: locale/programs/charmap.c:1029 locale/programs/repertoire.c:456 #, fuzzy msgid "upper limit in range is smaller than lower limit" msgstr "區域定義中的最大值沒有比最小值還要小" #: locale/programs/charmap.c:1087 msgid "resulting bytes for range not representable." msgstr "用來定義範圍的位元組無法被表述出來" #: locale/programs/ld-address.c:135 locale/programs/ld-collate.c:1556 #: locale/programs/ld-ctype.c:420 locale/programs/ld-identification.c:133 #: locale/programs/ld-measurement.c:94 locale/programs/ld-messages.c:97 #: locale/programs/ld-monetary.c:194 locale/programs/ld-name.c:94 #: locale/programs/ld-numeric.c:98 locale/programs/ld-paper.c:91 #: locale/programs/ld-telephone.c:94 locale/programs/ld-time.c:159 #, c-format msgid "No definition for %s category found" msgstr "找不到 %s 類別的定義" #: locale/programs/ld-address.c:146 locale/programs/ld-address.c:184 #: locale/programs/ld-address.c:202 locale/programs/ld-address.c:231 #: locale/programs/ld-address.c:303 locale/programs/ld-address.c:322 #: locale/programs/ld-address.c:335 locale/programs/ld-identification.c:146 #: locale/programs/ld-measurement.c:105 locale/programs/ld-monetary.c:206 #: locale/programs/ld-monetary.c:250 locale/programs/ld-monetary.c:266 #: locale/programs/ld-monetary.c:278 locale/programs/ld-name.c:105 #: locale/programs/ld-name.c:142 locale/programs/ld-numeric.c:112 #: locale/programs/ld-numeric.c:126 locale/programs/ld-paper.c:102 #: locale/programs/ld-paper.c:111 locale/programs/ld-telephone.c:105 #: locale/programs/ld-telephone.c:162 locale/programs/ld-time.c:175 #: locale/programs/ld-time.c:196 #, c-format msgid "%s: field `%s' not defined" msgstr "%s: 欄位 `%s' 沒有定義" #: locale/programs/ld-address.c:158 locale/programs/ld-address.c:210 #: locale/programs/ld-address.c:240 locale/programs/ld-address.c:278 #: locale/programs/ld-name.c:117 locale/programs/ld-telephone.c:117 #, c-format msgid "%s: field `%s' must not be empty" msgstr "%s: 欄位 `%s' 不可以空白" #: locale/programs/ld-address.c:170 #, c-format msgid "%s: invalid escape `%%%c' sequence in field `%s'" msgstr "%s: 不適用的跳脫序列 `%%%c', 在欄位 `%s' 中" #: locale/programs/ld-address.c:221 #, c-format msgid "%s: terminology language code `%s' not defined" msgstr "%s: 術語語言編碼 `%s' 未定義" #: locale/programs/ld-address.c:246 #, fuzzy, c-format msgid "%s: field `%s' must not be defined" msgstr "%s: 欄位 `%s' 沒有定義" #: locale/programs/ld-address.c:260 locale/programs/ld-address.c:289 #, c-format msgid "%s: language abbreviation `%s' not defined" msgstr "%s: 語言縮寫 `%s' 沒有定義" #: locale/programs/ld-address.c:267 locale/programs/ld-address.c:295 #: locale/programs/ld-address.c:329 locale/programs/ld-address.c:341 #, c-format msgid "%s: `%s' value does not match `%s' value" msgstr "%s: `%s' 值與 `%s' 值不符合" #: locale/programs/ld-address.c:314 #, c-format msgid "%s: numeric country code `%d' not valid" msgstr "%s: 國家數字代碼 `%d' 錯誤" #: locale/programs/ld-address.c:510 locale/programs/ld-address.c:547 #: locale/programs/ld-address.c:585 locale/programs/ld-ctype.c:2608 #: locale/programs/ld-identification.c:364 #: locale/programs/ld-measurement.c:221 locale/programs/ld-messages.c:301 #: locale/programs/ld-monetary.c:701 locale/programs/ld-monetary.c:736 #: locale/programs/ld-monetary.c:777 locale/programs/ld-name.c:280 #: locale/programs/ld-numeric.c:263 locale/programs/ld-paper.c:224 #: locale/programs/ld-telephone.c:288 locale/programs/ld-time.c:1126 #: locale/programs/ld-time.c:1168 #, c-format msgid "%s: field `%s' declared more than once" msgstr "%s: `%s' 欄位不只一次地宣告" #: locale/programs/ld-address.c:514 locale/programs/ld-address.c:552 #: locale/programs/ld-identification.c:368 locale/programs/ld-messages.c:311 #: locale/programs/ld-monetary.c:705 locale/programs/ld-monetary.c:740 #: locale/programs/ld-name.c:284 locale/programs/ld-numeric.c:267 #: locale/programs/ld-telephone.c:292 locale/programs/ld-time.c:1020 #: locale/programs/ld-time.c:1089 locale/programs/ld-time.c:1131 #, c-format msgid "%s: unknown character in field `%s'" msgstr "%s: 未知的字元在欄位 `%s' 中" #: locale/programs/ld-address.c:599 locale/programs/ld-collate.c:3922 #: locale/programs/ld-ctype.c:2981 locale/programs/ld-identification.c:449 #: locale/programs/ld-measurement.c:235 locale/programs/ld-messages.c:330 #: locale/programs/ld-monetary.c:941 locale/programs/ld-name.c:305 #: locale/programs/ld-numeric.c:366 locale/programs/ld-paper.c:239 #: locale/programs/ld-telephone.c:311 locale/programs/ld-time.c:1219 #, c-format msgid "%s: incomplete `END' line" msgstr "%s: 不完整的 `END' 行" #: locale/programs/ld-address.c:609 locale/programs/ld-collate.c:542 #: locale/programs/ld-collate.c:594 locale/programs/ld-collate.c:890 #: locale/programs/ld-collate.c:903 locale/programs/ld-collate.c:2733 #: locale/programs/ld-collate.c:2754 locale/programs/ld-collate.c:4107 #: locale/programs/ld-ctype.c:1960 locale/programs/ld-ctype.c:2219 #: locale/programs/ld-ctype.c:2806 locale/programs/ld-ctype.c:2992 #: locale/programs/ld-identification.c:459 #: locale/programs/ld-measurement.c:245 locale/programs/ld-messages.c:339 #: locale/programs/ld-monetary.c:950 locale/programs/ld-name.c:314 #: locale/programs/ld-numeric.c:375 locale/programs/ld-paper.c:248 #: locale/programs/ld-telephone.c:320 locale/programs/ld-time.c:1228 #, c-format msgid "%s: syntax error" msgstr "%s: 語法錯誤" #: locale/programs/ld-collate.c:417 #, c-format msgid "`%.*s' already defined in charmap" msgstr "`%.*s' 在字集對照表中已經定義過了" #: locale/programs/ld-collate.c:426 #, c-format msgid "`%.*s' already defined in repertoire" msgstr "`%.*s' 在編碼對映檔中已經被定義過了" #: locale/programs/ld-collate.c:433 #, c-format msgid "`%.*s' already defined as collating symbol" msgstr "`%.*s' 已被定義為對照符號" #: locale/programs/ld-collate.c:440 #, c-format msgid "`%.*s' already defined as collating element" msgstr "`%.*s' 已被定義為對照元素" #: locale/programs/ld-collate.c:471 locale/programs/ld-collate.c:497 #, c-format msgid "%s: `forward' and `backward' are mutually excluding each other" msgstr "%s: `forward' 以及 `backward' 彼此互相排斥" #: locale/programs/ld-collate.c:481 locale/programs/ld-collate.c:507 #: locale/programs/ld-collate.c:523 #, c-format msgid "%s: `%s' mentioned more than once in definition of weight %d" msgstr "%s: `%s' 不只一次地在權重 %d 中被提到" #: locale/programs/ld-collate.c:579 #, c-format msgid "%s: too many rules; first entry only had %d" msgstr "%s: 太多規則；第一個項目只包含 %d" #: locale/programs/ld-collate.c:615 #, c-format msgid "%s: not enough sorting rules" msgstr "%s: 排序規則不足" #: locale/programs/ld-collate.c:780 #, c-format msgid "%s: empty weight string not allowed" msgstr "%s: 空白的權重字串是不允許的" #: locale/programs/ld-collate.c:875 #, c-format msgid "%s: weights must use the same ellipsis symbol as the name" msgstr "%s: 權重必須使用與名稱相同的省略符號" #: locale/programs/ld-collate.c:931 #, c-format msgid "%s: too many values" msgstr "%s: 太多變數值" #: locale/programs/ld-collate.c:1051 locale/programs/ld-collate.c:1226 #, c-format msgid "order for `%.*s' already defined at %s:%Zu" msgstr "`%.*s' 的順序已經在 %s:%Zu 裡面定義了" #: locale/programs/ld-collate.c:1101 #, c-format msgid "%s: the start and the end symbol of a range must stand for characters" msgstr "%s: 啟始與結束符號範圍必須代表字元" #: locale/programs/ld-collate.c:1128 #, c-format msgid "%s: byte sequences of first and last character must have the same length" msgstr "%s: 第一個與最後一個字元的位元組序列必須有相同的長度" #: locale/programs/ld-collate.c:1170 #, fuzzy, c-format msgid "%s: byte sequence of first character of range is not lower than that of the last character" msgstr "%s: 第一個字元序列的位元組序列並沒有低於最後一個字元的位元組序列" #: locale/programs/ld-collate.c:1295 #, c-format msgid "%s: symbolic range ellipsis must not directly follow `order_start'" msgstr "%s: 符號範圍的省略不可以直接在 `order_start' 之後" #: locale/programs/ld-collate.c:1299 #, c-format msgid "%s: symbolic range ellipsis must not be directly followed by `order_end'" msgstr "%s: 符號範圍的省略不可以直接在 `order_end' 之前" #: locale/programs/ld-collate.c:1319 locale/programs/ld-ctype.c:1477 #, fuzzy, c-format msgid "`%s' and `%.*s' are not valid names for symbolic range" msgstr "`%s' 和 `%.*s' 皆非符號範圍中適用的名稱" #: locale/programs/ld-collate.c:1369 locale/programs/ld-collate.c:3858 #, c-format msgid "%s: order for `%.*s' already defined at %s:%Zu" msgstr "%s: `%.*s' 的順序已在 %s:%Zu 中定義" #: locale/programs/ld-collate.c:1378 #, c-format msgid "%s: `%s' must be a character" msgstr "%s: `%s' 必須是一個字元" #: locale/programs/ld-collate.c:1573 #, c-format msgid "%s: `position' must be used for a specific level in all sections or none" msgstr "%s: `position' 必須在所有區塊裡特定的等級中使用，否則不能使用" #: locale/programs/ld-collate.c:1598 #, c-format msgid "symbol `%s' not defined" msgstr "並未定義 `%s' 符號" #: locale/programs/ld-collate.c:1674 locale/programs/ld-collate.c:1780 #, c-format msgid "symbol `%s' has the same encoding as" msgstr "跟符號 `%s' 有相同的編碼: " #: locale/programs/ld-collate.c:1678 locale/programs/ld-collate.c:1784 #, c-format msgid "symbol `%s'" msgstr "符號 `%s'" #: locale/programs/ld-collate.c:1826 #, c-format msgid "no definition of `UNDEFINED'" msgstr "沒有找到 `UNDEFINED' 的定義" #: locale/programs/ld-collate.c:1855 #, c-format msgid "too many errors; giving up" msgstr "發生太多錯誤；放棄中" #: locale/programs/ld-collate.c:2659 locale/programs/ld-collate.c:4046 #, fuzzy, c-format msgid "%s: nested conditionals not supported" msgstr "此項操作並不被支援" #: locale/programs/ld-collate.c:2677 #, fuzzy, c-format msgid "%s: more then one 'else'" msgstr "%s: 您使用了超過一個 -l 選項\n" #: locale/programs/ld-collate.c:2852 #, c-format msgid "%s: duplicate definition of `%s'" msgstr "%s: 重複的定義 `%s'" #: locale/programs/ld-collate.c:2888 #, c-format msgid "%s: duplicate declaration of section `%s'" msgstr "%s: 重複的 `%s' 區塊宣告" #: locale/programs/ld-collate.c:3024 #, c-format msgid "%s: unknown character in collating symbol name" msgstr "%s: 未知的字元在對照符號名稱中" #: locale/programs/ld-collate.c:3153 #, c-format msgid "%s: unknown character in equivalent definition name" msgstr "%s: 未知的字元在同義定義名稱中" #: locale/programs/ld-collate.c:3164 #, c-format msgid "%s: unknown character in equivalent definition value" msgstr "%s: 未知的字元在同義定義值中" #: locale/programs/ld-collate.c:3174 #, c-format msgid "%s: unknown symbol `%s' in equivalent definition" msgstr "%s: 未知的符號 `%s' 在同義定義中" #: locale/programs/ld-collate.c:3183 msgid "error while adding equivalent collating symbol" msgstr "正在加入同義對照符號時發生錯誤" #: locale/programs/ld-collate.c:3221 #, c-format msgid "duplicate definition of script `%s'" msgstr "敘述 `%s' 的定義重複了" #: locale/programs/ld-collate.c:3269 #, fuzzy, c-format msgid "%s: unknown section name `%.*s'" msgstr "%s: 未知的區塊名稱 `%s'" #: locale/programs/ld-collate.c:3298 #, c-format msgid "%s: multiple order definitions for section `%s'" msgstr "%s: `%s' 區塊中有多個順序定義" #: locale/programs/ld-collate.c:3326 #, c-format msgid "%s: invalid number of sorting rules" msgstr "%s: 不適用的排序規則數目" #: locale/programs/ld-collate.c:3353 #, c-format msgid "%s: multiple order definitions for unnamed section" msgstr "%s: 未命名的區塊中有多個順序定義" #: locale/programs/ld-collate.c:3407 locale/programs/ld-collate.c:3537 #: locale/programs/ld-collate.c:3900 #, c-format msgid "%s: missing `order_end' keyword" msgstr "%s: 缺少 `order_end' 關鍵字" #: locale/programs/ld-collate.c:3470 #, c-format msgid "%s: order for collating symbol %.*s not yet defined" msgstr "%s: 對照符號 %.*s 的順序尚未定義" #: locale/programs/ld-collate.c:3488 #, c-format msgid "%s: order for collating element %.*s not yet defined" msgstr "%s: 對照元素 %.*s 的順序尚未定義" #: locale/programs/ld-collate.c:3499 #, c-format msgid "%s: cannot reorder after %.*s: symbol not known" msgstr "%s: 無法重新排列在 %.*s 之後: 未知的符號" #: locale/programs/ld-collate.c:3551 locale/programs/ld-collate.c:3912 #, c-format msgid "%s: missing `reorder-end' keyword" msgstr "%s: 缺少 `reorder-end' 關鍵字" #: locale/programs/ld-collate.c:3585 locale/programs/ld-collate.c:3783 #, c-format msgid "%s: section `%.*s' not known" msgstr "%s: 未知的區塊 `%.*s'" #: locale/programs/ld-collate.c:3650 #, c-format msgid "%s: bad symbol <%.*s>" msgstr "%s: 不當的符號 <%.*s>" #: locale/programs/ld-collate.c:3846 #, c-format msgid "%s: cannot have `%s' as end of ellipsis range" msgstr "%s: 無法用 `%s' 做為省略區段的結尾" #: locale/programs/ld-collate.c:3896 #, c-format msgid "%s: empty category description not allowed" msgstr "%s: 空白的類別描述是不允許的" #: locale/programs/ld-collate.c:3915 #, c-format msgid "%s: missing `reorder-sections-end' keyword" msgstr "%s: 缺少 `reorder-sections-end' 關鍵字" #: locale/programs/ld-collate.c:4079 #, c-format msgid "%s: '%s' without matching 'ifdef' or 'ifndef'" msgstr "" #: locale/programs/ld-collate.c:4097 #, c-format msgid "%s: 'endif' without matching 'ifdef' or 'ifndef'" msgstr "" #: locale/programs/ld-ctype.c:439 #, c-format msgid "No character set name specified in charmap" msgstr "在字元對應 (charmap) 中沒有設定字集名稱" #: locale/programs/ld-ctype.c:468 #, c-format msgid "character L'\\u%0*x' in class `%s' must be in class `%s'" msgstr "character L'\\u%0*x' (放在類別 `%s' 之中) 必須在類別 `%s' 裡面" #: locale/programs/ld-ctype.c:483 #, c-format msgid "character L'\\u%0*x' in class `%s' must not be in class `%s'" msgstr "character L'\\u%0*x' (放在類別 `%s' 之中) 不能在類別 `%s' 裡面" #: locale/programs/ld-ctype.c:497 locale/programs/ld-ctype.c:555 #, c-format msgid "internal error in %s, line %u" msgstr "%s 的第 %u 行發生內部錯誤" #: locale/programs/ld-ctype.c:526 #, c-format msgid "character '%s' in class `%s' must be in class `%s'" msgstr "字元 '%s' (放在類別 `%s' 之中) 必須在類別 `%s' 裡面" #: locale/programs/ld-ctype.c:542 #, c-format msgid "character '%s' in class `%s' must not be in class `%s'" msgstr "字元 '%s' (放在類別 `%s' 之中) 不能在類別 `%s' 裡面" #: locale/programs/ld-ctype.c:572 locale/programs/ld-ctype.c:610 #, c-format msgid " character not in class `%s'" msgstr " 字元不在類別 `%s' 中" #: locale/programs/ld-ctype.c:584 locale/programs/ld-ctype.c:621 #, c-format msgid " character must not be in class `%s'" msgstr " 字元不可以在類別 `%s' 中" #: locale/programs/ld-ctype.c:599 #, c-format msgid "character not defined in character map" msgstr "字元 在字集對照檔中沒有定義" #: locale/programs/ld-ctype.c:714 #, c-format msgid "`digit' category has not entries in groups of ten" msgstr "`digit' 類別在群組 \"十\" 中沒有項目" #: locale/programs/ld-ctype.c:763 #, c-format msgid "no input digits defined and none of the standard names in the charmap" msgstr "沒有定義輸入數字，在字集對照檔中也找不到相符的標準名稱" #: locale/programs/ld-ctype.c:828 #, c-format msgid "not all characters used in `outdigit' are available in the charmap" msgstr "在字集對照表中無法找到某些在 `outdigit' 中用到的字元" #: locale/programs/ld-ctype.c:845 #, c-format msgid "not all characters used in `outdigit' are available in the repertoire" msgstr "在編碼對映檔中無法找到某些在 `outdigit' 中用到的字元" #: locale/programs/ld-ctype.c:1245 #, c-format msgid "character class `%s' already defined" msgstr "字元類別 `%s' 已經定義過了" #: locale/programs/ld-ctype.c:1251 #, c-format msgid "implementation limit: no more than %Zd character classes allowed" msgstr "程式實作的限制: 不能使用超過 %Zd 個字集類別" #: locale/programs/ld-ctype.c:1277 #, c-format msgid "character map `%s' already defined" msgstr "字集對照檔 `%s' 已經定義過了" #: locale/programs/ld-ctype.c:1283 #, c-format msgid "implementation limit: no more than %d character maps allowed" msgstr "程式實作的限制: 不能使用超過 %d 個字集對照檔" #: locale/programs/ld-ctype.c:1548 locale/programs/ld-ctype.c:1673 #: locale/programs/ld-ctype.c:1779 locale/programs/ld-ctype.c:2471 #: locale/programs/ld-ctype.c:3467 #, c-format msgid "%s: field `%s' does not contain exactly ten entries" msgstr "%s: `%s' 欄位沒有精確包含十個項目" #: locale/programs/ld-ctype.c:1576 locale/programs/ld-ctype.c:2150 #, c-format msgid "to-value of range is smaller than from-value " msgstr "區域定義的結尾值 比起始值 還要小" #: locale/programs/ld-ctype.c:1703 msgid "start and end character sequence of range must have the same length" msgstr "從起始到結束之間的字元序列長度跟編碼範圍必須相同" #: locale/programs/ld-ctype.c:1710 msgid "to-value character sequence is smaller than from-value sequence" msgstr "字元序列定義的結尾值比起始值還要小" #: locale/programs/ld-ctype.c:2070 locale/programs/ld-ctype.c:2121 msgid "premature end of `translit_ignore' definition" msgstr "`translit_ignore' 定義沒有按時結束" #: locale/programs/ld-ctype.c:2076 locale/programs/ld-ctype.c:2127 #: locale/programs/ld-ctype.c:2169 msgid "syntax error" msgstr "語法錯誤" #: locale/programs/ld-ctype.c:2303 #, c-format msgid "%s: syntax error in definition of new character class" msgstr "%s: 在定義新字元類別時語法錯誤" #: locale/programs/ld-ctype.c:2318 #, c-format msgid "%s: syntax error in definition of new character map" msgstr "%s: 在定義新字元對應時語法錯誤" #: locale/programs/ld-ctype.c:2493 msgid "ellipsis range must be marked by two operands of same type" msgstr "省略區域必須用兩個型別相同的運算元標示出來" #: locale/programs/ld-ctype.c:2502 msgid "with symbolic name range values the absolute ellipsis `...' must not be used" msgstr "用符號名稱來指定字元編碼範圍時不可以用絕對位置的省略符號 `...'" #: locale/programs/ld-ctype.c:2517 msgid "with UCS range values one must use the hexadecimal symbolic ellipsis `..'" msgstr "用來指定 UCS 值的範圍時得用十六進位表示的省略符號 `..'" #: locale/programs/ld-ctype.c:2531 msgid "with character code range values one must use the absolute ellipsis `...'" msgstr "用來指定字元編碼值的範圍時得用絕對位置的省略符號 `...'" #: locale/programs/ld-ctype.c:2682 #, c-format msgid "duplicated definition for mapping `%s'" msgstr "對映 `%s' 的定義重複了" #: locale/programs/ld-ctype.c:2768 locale/programs/ld-ctype.c:2912 #, c-format msgid "%s: `translit_start' section does not end with `translit_end'" msgstr "%s: `translit_start' 小節並沒有以 `translit_end' 做為結束" #: locale/programs/ld-ctype.c:2863 #, c-format msgid "%s: duplicate `default_missing' definition" msgstr "%s: 重複的 `default_missing' 定義" #: locale/programs/ld-ctype.c:2868 msgid "previous definition was here" msgstr "先前的設定在此" #: locale/programs/ld-ctype.c:2890 #, c-format msgid "%s: no representable `default_missing' definition found" msgstr "%s: 找不到可表示為 `default_missing' 的定義" #: locale/programs/ld-ctype.c:3043 locale/programs/ld-ctype.c:3127 #: locale/programs/ld-ctype.c:3147 locale/programs/ld-ctype.c:3168 #: locale/programs/ld-ctype.c:3189 locale/programs/ld-ctype.c:3210 #: locale/programs/ld-ctype.c:3231 locale/programs/ld-ctype.c:3271 #: locale/programs/ld-ctype.c:3292 locale/programs/ld-ctype.c:3359 #: locale/programs/ld-ctype.c:3401 locale/programs/ld-ctype.c:3426 #, c-format msgid "%s: character `%s' not defined while needed as default value" msgstr "%s: 字元 `%s' 沒有定義，但它是必需的預設值" #: locale/programs/ld-ctype.c:3048 locale/programs/ld-ctype.c:3132 #: locale/programs/ld-ctype.c:3152 locale/programs/ld-ctype.c:3173 #: locale/programs/ld-ctype.c:3194 locale/programs/ld-ctype.c:3215 #: locale/programs/ld-ctype.c:3236 locale/programs/ld-ctype.c:3276 #: locale/programs/ld-ctype.c:3297 locale/programs/ld-ctype.c:3364 #, c-format msgid "%s: character `%s' in charmap not representable with one byte" msgstr "%s: 字集對照表中的字元 `%s' 無法表示為單一位元組" #: locale/programs/ld-ctype.c:3408 locale/programs/ld-ctype.c:3433 #, c-format msgid "%s: character `%s' needed as default value not representable with one byte" msgstr "%s: 做為預設值所需的字元 `%s' 無法表示為單一位元組" #: locale/programs/ld-ctype.c:3489 #, c-format msgid "no output digits defined and none of the standard names in the charmap" msgstr "沒有定義輸出數字，在字集對照檔中也找不到相符的標準名稱" #: locale/programs/ld-ctype.c:3780 #, c-format msgid "%s: transliteration data from locale `%s' not available" msgstr "%s: 語區資料`%s' 的音譯資料不存在" #: locale/programs/ld-ctype.c:3881 #, c-format msgid "%s: table for class \"%s\": %lu bytes\n" msgstr "%s: 類別 \"%s\" 表格: %lu 位元組\n" #: locale/programs/ld-ctype.c:3950 #, c-format msgid "%s: table for map \"%s\": %lu bytes\n" msgstr "%s: 對映表 \"%s\" 表格: %lu 位元組\n" #: locale/programs/ld-ctype.c:4083 #, c-format msgid "%s: table for width: %lu bytes\n" msgstr "%s: 寬度表格: %lu 位元組\n" #: locale/programs/ld-identification.c:170 #, c-format msgid "%s: no identification for category `%s'" msgstr "%s: 類別 `%s' 沒有認證" #: locale/programs/ld-identification.c:435 #, c-format msgid "%s: duplicate category version definition" msgstr "%s: 重複的類別版本定義" #: locale/programs/ld-measurement.c:113 #, c-format msgid "%s: invalid value for field `%s'" msgstr "%s: 在欄位 `%s' 中的值不適用" #: locale/programs/ld-messages.c:114 locale/programs/ld-messages.c:148 #, c-format msgid "%s: field `%s' undefined" msgstr "%s: 欄位 `%s' 沒有定義" #: locale/programs/ld-messages.c:121 locale/programs/ld-messages.c:155 #: locale/programs/ld-monetary.c:256 locale/programs/ld-numeric.c:118 #, c-format msgid "%s: value for field `%s' must not be an empty string" msgstr "%s: 欄位 `%s' 值不可以是空字串" #: locale/programs/ld-messages.c:137 locale/programs/ld-messages.c:171 #, c-format msgid "%s: no correct regular expression for field `%s': %s" msgstr "%s: 沒有給欄位 `%s' 正確的常規表示式： %s" #: locale/programs/ld-monetary.c:224 #, c-format msgid "%s: value of field `int_curr_symbol' has wrong length" msgstr "%s: 欄位 `int_curr_symbol' 值的長度錯誤" #: locale/programs/ld-monetary.c:237 #, c-format msgid "%s: value of field `int_curr_symbol' does not correspond to a valid name in ISO 4217" msgstr "%s: 欄位 `int_curr_symbol' 值並不是 ISO 4217 中合法的名稱" #: locale/programs/ld-monetary.c:285 locale/programs/ld-monetary.c:315 #, c-format msgid "%s: value for field `%s' must be in range %d...%d" msgstr "%s: 欄位 `%s' 的值必須在範圍 %d...%d" #: locale/programs/ld-monetary.c:747 locale/programs/ld-numeric.c:274 #, c-format msgid "%s: value for field `%s' must be a single character" msgstr "%s: 欄位 `%s' 的值必須是個單一字元" #: locale/programs/ld-monetary.c:844 locale/programs/ld-numeric.c:318 #, c-format msgid "%s: `-1' must be last entry in `%s' field" msgstr "%s: `-1' 在 `%s' 欄位中必須是最後一個項目" #: locale/programs/ld-monetary.c:866 locale/programs/ld-numeric.c:335 #, c-format msgid "%s: values for field `%s' must be smaller than 127" msgstr "%s: 欄位 `%s' 的值必須小於 127" #: locale/programs/ld-monetary.c:909 msgid "conversion rate value cannot be zero" msgstr "轉換率的值不可以是零" #: locale/programs/ld-name.c:129 locale/programs/ld-telephone.c:126 #: locale/programs/ld-telephone.c:149 #, c-format msgid "%s: invalid escape sequence in field `%s'" msgstr "%s: 在欄位 `%s' 中的跳脫序列不適用" #: locale/programs/ld-time.c:247 #, c-format msgid "%s: direction flag in string %Zd in `era' field is not '+' nor '-'" msgstr "%s: 在 `era' 欄位的字串 %Zd 中，方向旗標既不是 '+' 也不是 '-'" #: locale/programs/ld-time.c:258 #, c-format msgid "%s: direction flag in string %Zd in `era' field is not a single character" msgstr "%s: 在 `era' 欄位的字串 %Zd 中，方向旗標不是一個單一字元" #: locale/programs/ld-time.c:271 #, c-format msgid "%s: invalid number for offset in string %Zd in `era' field" msgstr "%s: 在 `era' 欄位、字串 %Zd 中的位移數字不適用" #: locale/programs/ld-time.c:279 #, c-format msgid "%s: garbage at end of offset value in string %Zd in `era' field" msgstr "%s: 無用的資料，在 `era' 欄位、字串 %Zd 中末尾的位移值" #: locale/programs/ld-time.c:330 #, c-format msgid "%s: invalid starting date in string %Zd in `era' field" msgstr "%s: 在 `era' 欄位、字串 %Zd 中的起始日期不適用" #: locale/programs/ld-time.c:339 #, c-format msgid "%s: garbage at end of starting date in string %Zd in `era' field " msgstr "%s: 無用的資料，在 `era' 欄位、字串 %Zd 中末尾的起始日期" #: locale/programs/ld-time.c:358 #, c-format msgid "%s: starting date is invalid in string %Zd in `era' field" msgstr "%s: 在 `era' 區域的字串 %Zd 中的啟始日期是不適用的" #: locale/programs/ld-time.c:407 locale/programs/ld-time.c:435 #, c-format msgid "%s: invalid stopping date in string %Zd in `era' field" msgstr "%s: 在 `era' 欄位、字串 %Zd 中的結束日期不適用" #: locale/programs/ld-time.c:416 #, c-format msgid "%s: garbage at end of stopping date in string %Zd in `era' field" msgstr "%s: 無用的資料，在 `era' 區域、字串 %Zd 中末尾的結束日期" #: locale/programs/ld-time.c:444 #, c-format msgid "%s: missing era name in string %Zd in `era' field" msgstr "%s: 缺少 era 名稱，在 `era' 欄位、字串 %Zd 中" #: locale/programs/ld-time.c:456 #, c-format msgid "%s: missing era format in string %Zd in `era' field" msgstr "%s: 缺少 era 格式，在 `era' 欄位、字串 %Zd 中" #: locale/programs/ld-time.c:497 #, c-format msgid "%s: third operand for value of field `%s' must not be larger than %d" msgstr "%s: 欄位 `%s' 值的第三個運算元不可以比 %d 大" #: locale/programs/ld-time.c:505 locale/programs/ld-time.c:513 #: locale/programs/ld-time.c:521 #, c-format msgid "%s: values for field `%s' must not be larger than %d" msgstr "%s: 欄位 `%s' 的值不可以大於 %d" #: locale/programs/ld-time.c:1004 #, c-format msgid "%s: too few values for field `%s'" msgstr "%s: 欄位 `%s' 中的值太少" #: locale/programs/ld-time.c:1049 msgid "extra trailing semicolon" msgstr "多出的尾端分號" #: locale/programs/ld-time.c:1052 #, c-format msgid "%s: too many values for field `%s'" msgstr "%s: 欄位 `%s' 中的值太多" #: locale/programs/linereader.c:130 msgid "trailing garbage at end of line" msgstr "行結尾的無用字元" #: locale/programs/linereader.c:298 msgid "garbage at end of number" msgstr "號碼結束位置的無用資料" #: locale/programs/linereader.c:410 msgid "garbage at end of character code specification" msgstr "字元編碼設定結束位置的無用資料" #: locale/programs/linereader.c:496 msgid "unterminated symbolic name" msgstr "沒有結尾的符號名稱" #: locale/programs/linereader.c:623 msgid "illegal escape sequence at end of string" msgstr "字串結尾有不合法的跳脫序列" #: locale/programs/linereader.c:627 locale/programs/linereader.c:855 msgid "unterminated string" msgstr "沒有結尾的字串" #: locale/programs/linereader.c:669 msgid "non-symbolic character value should not be used" msgstr "非符號性的字元值不應該被使用才對" #: locale/programs/linereader.c:816 #, c-format msgid "symbol `%.*s' not in charmap" msgstr "符號 `%.*s' 並不在字集對照表中" #: locale/programs/linereader.c:837 #, c-format msgid "symbol `%.*s' not in repertoire map" msgstr "符號 `%.*s' 並不在編碼對映檔中" #: locale/programs/locale.c:74 msgid "System information:" msgstr "系統相關資訊:" #: locale/programs/locale.c:76 msgid "Write names of available locales" msgstr "寫出存在的語區資料名稱" #: locale/programs/locale.c:78 msgid "Write names of available charmaps" msgstr "寫出存在的字集對照表名稱" #: locale/programs/locale.c:79 msgid "Modify output format:" msgstr "修改輸出格式:" #: locale/programs/locale.c:80 msgid "Write names of selected categories" msgstr "寫出選取的類別名稱" #: locale/programs/locale.c:81 msgid "Write names of selected keywords" msgstr "寫出選取的關鍵字名稱" #: locale/programs/locale.c:82 msgid "Print more information" msgstr "印出更多的資訊" #: locale/programs/locale.c:87 msgid "Get locale-specific information." msgstr "取得語區資料特定的資訊" #: locale/programs/locale.c:90 msgid "" "NAME\n" "[-a|-m]" msgstr "" "名稱\n" "[-a|-m]" #: locale/programs/locale.c:194 #, c-format msgid "Cannot set LC_CTYPE to default locale" msgstr "無法將 LC_CTYPE 設置為預設的語區" #: locale/programs/locale.c:196 #, c-format msgid "Cannot set LC_MESSAGES to default locale" msgstr "無法將 LC_MESSAGES 設置為預設的語區" #: locale/programs/locale.c:209 #, c-format msgid "Cannot set LC_COLLATE to default locale" msgstr "無法將 LC_COLLATE 設置為預設的語區" #: locale/programs/locale.c:225 #, c-format msgid "Cannot set LC_ALL to default locale" msgstr "無法將 LC_ALL 設置為預設的語區" #: locale/programs/locale.c:518 #, c-format msgid "while preparing output" msgstr "在準備輸出時" #: locale/programs/localedef.c:120 msgid "Input Files:" msgstr "輸入檔:" #: locale/programs/localedef.c:122 msgid "Symbolic character names defined in FILE" msgstr "符號字元的名稱定義在檔案 FILE 中" #: locale/programs/localedef.c:123 msgid "Source definitions are found in FILE" msgstr "原始資料定義在檔案 FILE 中" #: locale/programs/localedef.c:125 msgid "FILE contains mapping from symbolic names to UCS4 values" msgstr "檔案 FILE 內含符號名與 UCS4 編碼之間的對映" #: locale/programs/localedef.c:129 msgid "Create output even if warning messages were issued" msgstr "產生輸出即使是有警告訊息" #: locale/programs/localedef.c:130 msgid "Create old-style tables" msgstr "產生舊格式的表格" #: locale/programs/localedef.c:131 msgid "Optional output file prefix" msgstr "可有可無的輸出檔路徑" #: locale/programs/localedef.c:132 msgid "Be strictly POSIX conform" msgstr "嚴格遵從 POSIX" #: locale/programs/localedef.c:134 msgid "Suppress warnings and information messages" msgstr "忽略警告與提示訊息" #: locale/programs/localedef.c:135 msgid "Print more messages" msgstr "印出更多的訊息" #: locale/programs/localedef.c:136 msgid "Archive control:" msgstr "保存檔控制:" #: locale/programs/localedef.c:138 msgid "Don't add new data to archive" msgstr "不要加入新資料到保存檔" #: locale/programs/localedef.c:140 msgid "Add locales named by parameters to archive" msgstr "藉由參數加入語區名稱到保存檔" #: locale/programs/localedef.c:141 msgid "Replace existing archive content" msgstr "替換已有的保存檔內容" #: locale/programs/localedef.c:143 msgid "Remove locales named by parameters from archive" msgstr "藉由參數從保存檔中刪除語區名稱" #: locale/programs/localedef.c:144 msgid "List content of archive" msgstr "列出保存檔的內容" #: locale/programs/localedef.c:146 msgid "locale.alias file to consult when making archive" msgstr "製作保存檔時查閱 locale.alias 檔案" #: locale/programs/localedef.c:151 msgid "Compile locale specification" msgstr "編譯語區資料規格" #: locale/programs/localedef.c:154 msgid "" "NAME\n" "[--add-to-archive|--delete-from-archive] FILE...\n" "--list-archive [FILE]" msgstr "" "NAME\n" "[--add-to-archive|--delete-from-archive] 檔案...\n" "--list-archive [檔案]" #: locale/programs/localedef.c:232 #, c-format msgid "cannot create directory for output files" msgstr "無法為輸出檔建立目錄" #: locale/programs/localedef.c:243 #, c-format msgid "FATAL: system does not define `_POSIX2_LOCALEDEF'" msgstr "嚴重錯誤: 系統沒有定義 `_POSIX2_LOCALEDEF'" #: locale/programs/localedef.c:257 locale/programs/localedef.c:273 #: locale/programs/localedef.c:599 locale/programs/localedef.c:619 #, c-format msgid "cannot open locale definition file `%s'" msgstr "無法開啟語區資料定義檔 `%s'" #: locale/programs/localedef.c:285 #, c-format msgid "cannot write output files to `%s'" msgstr "無法將輸出檔案寫入 `%s'" #: locale/programs/localedef.c:366 #, c-format msgid "" "System's directory for character maps : %s\n" " repertoire maps: %s\n" " locale path : %s\n" "%s" msgstr "" "系統的字集對照檔 (character maps) 目錄 : %s\n" " 編碼對映檔 (repertoire maps) 目錄 : %s\n" " 語區資料路徑 : %s\n" "%s" #: locale/programs/localedef.c:567 #, c-format msgid "circular dependencies between locale definitions" msgstr "有語區資料在定義時發生循環相關的情況" #: locale/programs/localedef.c:573 #, c-format msgid "cannot add already read locale `%s' a second time" msgstr " `%s' 語區資料已經用過，不能重複加入" #: locale/programs/locarchive.c:88 locale/programs/locarchive.c:261 #, c-format msgid "cannot create temporary file" msgstr "無法產生暫時檔" #: locale/programs/locarchive.c:118 locale/programs/locarchive.c:307 #, c-format msgid "cannot initialize archive file" msgstr "無法起始保存檔" #: locale/programs/locarchive.c:125 locale/programs/locarchive.c:314 #, c-format msgid "cannot resize archive file" msgstr "無法改變保存檔大小" #: locale/programs/locarchive.c:134 locale/programs/locarchive.c:323 #: locale/programs/locarchive.c:527 #, c-format msgid "cannot map archive header" msgstr "無法註記保存檔表頭" #: locale/programs/locarchive.c:156 #, c-format msgid "failed to create new locale archive" msgstr "無法建立新的語區保存檔" #: locale/programs/locarchive.c:168 #, c-format msgid "cannot change mode of new locale archive" msgstr "無法改變新的語區資料保存檔狀態" #: locale/programs/locarchive.c:255 #, c-format msgid "cannot map locale archive file" msgstr "無法映射語區資料保存檔" #: locale/programs/locarchive.c:331 #, c-format msgid "cannot lock new archive" msgstr "無法鎖定新的保存檔" #: locale/programs/locarchive.c:396 #, c-format msgid "cannot extend locale archive file" msgstr "無法延展語區資料保存檔" #: locale/programs/locarchive.c:405 #, c-format msgid "cannot change mode of resized locale archive" msgstr "無法改變已變更大小的語區資料保存檔狀態" #: locale/programs/locarchive.c:413 #, c-format msgid "cannot rename new archive" msgstr "無法更改新保存檔名稱" #: locale/programs/locarchive.c:466 #, c-format msgid "cannot open locale archive \"%s\"" msgstr "無法開啟語區資料保存檔 \"%s\"" #: locale/programs/locarchive.c:471 #, c-format msgid "cannot stat locale archive \"%s\"" msgstr "無法統計語區資料保存檔 \"%s\"" #: locale/programs/locarchive.c:490 #, c-format msgid "cannot lock locale archive \"%s\"" msgstr "無法鎖定語區資料保存檔 \"%s\"" #: locale/programs/locarchive.c:513 #, c-format msgid "cannot read archive header" msgstr "無法讀取保存檔表頭資料" #: locale/programs/locarchive.c:573 #, c-format msgid "locale '%s' already exists" msgstr "語區資料 `%s' 已經存在" #: locale/programs/locarchive.c:804 locale/programs/locarchive.c:819 #: locale/programs/locarchive.c:831 locale/programs/locarchive.c:843 #: locale/programs/locfile.c:344 #, c-format msgid "cannot add to locale archive" msgstr "無法加入語區資料保存檔" #: locale/programs/locarchive.c:998 #, c-format msgid "locale alias file `%s' not found" msgstr "找不到語區資料別名檔 `%s'" #: locale/programs/locarchive.c:1142 #, c-format msgid "Adding %s\n" msgstr "加入 %s 中\n" #: locale/programs/locarchive.c:1148 #, c-format msgid "stat of \"%s\" failed: %s: ignored" msgstr "取得 \"%s\" 的資訊時失敗: %s: 已忽略" #: locale/programs/locarchive.c:1154 #, c-format msgid "\"%s\" is no directory; ignored" msgstr "\"%s\" 並非目錄; 已忽略" #: locale/programs/locarchive.c:1161 #, c-format msgid "cannot open directory \"%s\": %s: ignored" msgstr "無法開啟目錄 \"%s\": %s: 已忽略" #: locale/programs/locarchive.c:1233 #, c-format msgid "incomplete set of locale files in \"%s\"" msgstr "不完整的一組語區資料檔案存在於 \"%s\" 之中" #: locale/programs/locarchive.c:1297 #, c-format msgid "cannot read all files in \"%s\": ignored" msgstr "無法讀取 \"%s\" 中的所有檔案: 已忽略" #: locale/programs/locarchive.c:1367 #, c-format msgid "locale \"%s\" not in archive" msgstr "語區資料 \"%s\" 不在保存檔中" #: locale/programs/locfile.c:132 #, c-format msgid "argument to `%s' must be a single character" msgstr "給 `%s' 的引數必須是一個單字元" #: locale/programs/locfile.c:252 msgid "syntax error: not inside a locale definition section" msgstr "語法錯誤: 不能在語區資料定義區塊裡面使用" #: locale/programs/locfile.c:626 #, c-format msgid "cannot open output file `%s' for category `%s'" msgstr "無法開啟輸出檔 `%s' 供類別 `%s' 使用" #: locale/programs/locfile.c:650 #, c-format msgid "failure while writing data for category `%s'" msgstr "正在為類別 `%s' 寫入資料時發生錯誤" #: locale/programs/locfile.c:746 #, c-format msgid "cannot create output file `%s' for category `%s'" msgstr "無法建立輸出檔 `%s' 供類別 `%s' 使用" #: locale/programs/locfile.c:782 #, fuzzy msgid "expecting string argument for `copy'" msgstr "`copy' 的參數應該是字串才對" #: locale/programs/locfile.c:786 msgid "locale name should consist only of portable characters" msgstr "語區資料的名稱應該用泛用字元 (portable characters) 組成" #: locale/programs/locfile.c:805 msgid "no other keyword shall be specified when `copy' is used" msgstr "使用 `copy' 的時候不應該再用到任何其他的關鍵字了" #: locale/programs/locfile.c:819 #, c-format msgid "`%1$s' definition does not end with `END %1$s'" msgstr "`%1$s' 定義沒有以 `END %1$s' 結束" #: locale/programs/repertoire.c:229 locale/programs/repertoire.c:270 #: locale/programs/repertoire.c:295 #, c-format msgid "syntax error in repertoire map definition: %s" msgstr "編碼對映檔中的定義有語法錯誤: %s" #: locale/programs/repertoire.c:271 msgid "no or value given" msgstr "沒有給定 或 的值" #: locale/programs/repertoire.c:331 #, fuzzy, c-format msgid "cannot save new repertoire map" msgstr "無法儲存新的編碼對映檔" #: locale/programs/repertoire.c:342 #, c-format msgid "repertoire map file `%s' not found" msgstr "找不到編碼對映檔 `%s'" #: login/programs/pt_chown.c:74 #, c-format msgid "Set the owner, group and access permission of the slave pseudo terminal corresponding to the master pseudo terminal passed on file descriptor `%d'. This is the helper program for the `grantpt' function. It is not intended to be run directly from the command line.\n" msgstr "" #: login/programs/pt_chown.c:84 #, c-format msgid "" "The owner is set to the current user, the group is set to `%s', and the access permission is set to `%o'.\n" "\n" "%s" msgstr "" #: login/programs/pt_chown.c:161 #, fuzzy, c-format msgid "too many arguments" msgstr "%s: 太多的引數\n" #: login/programs/pt_chown.c:169 #, c-format msgid "needs to be installed setuid `root'" msgstr "" #: malloc/mcheck.c:330 msgid "memory is consistent, library is buggy\n" msgstr "記憶體內容一致，函式庫有問題\n" #: malloc/mcheck.c:333 msgid "memory clobbered before allocated block\n" msgstr "記憶體在配置區塊之前就 clobbered 了\n" #: malloc/mcheck.c:336 msgid "memory clobbered past end of allocated block\n" msgstr "記憶體在經過配置的區塊尾部時 clobbered 了\n" #: malloc/mcheck.c:339 msgid "block freed twice\n" msgstr "此區塊被用 free 指令釋放了兩次\n" #: malloc/mcheck.c:342 msgid "bogus mcheck_status, library is buggy\n" msgstr "記憶體檢查狀態 (mcheck_ststus) 有誤，您所用的函式庫有問題\n" #: malloc/memusage.sh:27 #, fuzzy msgid "Try \\`memusage --help' for more information." msgstr "請試著用 `%s --help' 或 `%s --usage' 來獲得更多相關訊息。\n" #: malloc/memusage.sh:33 #, fuzzy msgid "memusage: option \\`$1' requires an argument" msgstr "%s: 選項 `%s' 需要一個引數\n" #: malloc/memusage.sh:39 msgid "" "Usage: memusage [OPTION]... PROGRAM [PROGRAMOPTION]...\n" "Profile memory usage of PROGRAM.\n" "\n" " -n,--progname=NAME Name of the program file to profile\n" " -p,--png=FILE Generate PNG graphic and store it in FILE\n" " -d,--data=FILE Generate binary data file and store it in FILE\n" " -u,--unbuffered Don't buffer output\n" " -b,--buffer=SIZE Collect SIZE entries before writing them out\n" " --no-timer Don't collect additional information through timer\n" " -m,--mmap Also trace mmap & friends\n" "\n" " -?,--help Print this help and exit\n" " --usage Give a short usage message\n" " -V,--version Print version information and exit\n" "\n" " The following options only apply when generating graphical output:\n" " -t,--time-based Make graph linear in time\n" " -T,--total Also draw graph of total memory use\n" " --title=STRING Use STRING as title of the graph\n" " -x,--x-size=SIZE Make graphic SIZE pixels wide\n" " -y,--y-size=SIZE Make graphic SIZE pixels high\n" "\n" "Mandatory arguments to long options are also mandatory for any corresponding\n" "short options.\n" "\n" msgstr "" #: malloc/memusage.sh:101 msgid "" "Syntax: memusage [--data=FILE] [--progname=NAME] [--png=FILE] [--unbuffered]\n" " [--buffer=SIZE] [--no-timer] [--time-based] [--total]\n" " [--title=STRING] [--x-size=SIZE] [--y-size=SIZE]\n" " PROGRAM [PROGRAMOPTION]..." msgstr "" #: malloc/memusage.sh:193 #, fuzzy msgid "memusage: option \\`${1##*=}' is ambiguous" msgstr "%s: 選項 `%s' 含義不清\n" #: malloc/memusage.sh:202 #, fuzzy msgid "memusage: unrecognized option \\`$1'" msgstr "%s: 未知的選項 `--%s'\n" #: malloc/memusage.sh:215 #, fuzzy msgid "No program name given" msgstr "並不是一個命名檔案" #: malloc/memusagestat.c:57 msgid "Name output file" msgstr "名稱輸出檔" #: malloc/memusagestat.c:58 msgid "Title string used in output graphic" msgstr "在輸出的圖像中使用有標頭的字串" #: malloc/memusagestat.c:59 msgid "Generate output linear to time (default is linear to number of function calls)" msgstr "產生輸出與時間呈線性關係 (預設是與函式呼叫數目呈線性關係)" #: malloc/memusagestat.c:61 msgid "Also draw graph for total memory consumption" msgstr "同時對總記憶體時用量作圖" #: malloc/memusagestat.c:62 #, fuzzy msgid "Make output graphic VALUE pixels wide" msgstr "設定輸出的圖形寬度為 VALUE 個像素" #: malloc/memusagestat.c:63 #, fuzzy msgid "Make output graphic VALUE pixels high" msgstr "設定輸出的圖形高度為 VALUE 個像素" #: malloc/memusagestat.c:68 msgid "Generate graphic from memory profiling data" msgstr "從記憶體性能測試資料產生圖像" #: malloc/memusagestat.c:71 msgid "DATAFILE [OUTFILE]" msgstr "資料檔 [輸出檔]" #: misc/error.c:118 msgid "Unknown system error" msgstr "未知的系統錯誤" #: nis/nis_callback.c:189 msgid "unable to free arguments" msgstr "無法釋放參數" #: nis/nis_error.h:1 nis/ypclnt.c:833 nis/ypclnt.c:921 posix/regcomp.c:133 #: sysdeps/gnu/errlist.c:20 msgid "Success" msgstr "成功" #: nis/nis_error.h:2 msgid "Probable success" msgstr "可能成功" #: nis/nis_error.h:3 msgid "Not found" msgstr "找不到" #: nis/nis_error.h:4 msgid "Probably not found" msgstr "可能找不到" #: nis/nis_error.h:5 msgid "Cache expired" msgstr "快取過時取消了" #: nis/nis_error.h:6 msgid "NIS+ servers unreachable" msgstr "NIS+ 伺服器無法連線" #: nis/nis_error.h:7 msgid "Unknown object" msgstr "未知的目的檔" #: nis/nis_error.h:8 msgid "Server busy, try again" msgstr "伺服器忙碌中，請再試一次" #: nis/nis_error.h:9 msgid "Generic system error" msgstr "一般系統錯誤" #: nis/nis_error.h:10 msgid "First/next chain broken" msgstr "第一個/下一個序列壞掉了" #. TRANS Permission denied; the file permissions do not allow the attempted operation. #: nis/nis_error.h:11 nis/ypclnt.c:878 sysdeps/gnu/errlist.c:157 msgid "Permission denied" msgstr "拒絕不符權限的操作" #: nis/nis_error.h:12 msgid "Not owner" msgstr "並非擁有者" #: nis/nis_error.h:13 msgid "Name not served by this server" msgstr "網域名稱服務不是由此伺服器提供" #: nis/nis_error.h:14 msgid "Server out of memory" msgstr "伺服器記憶體已用完" #: nis/nis_error.h:15 msgid "Object with same name exists" msgstr "同名的目標已經存在" #: nis/nis_error.h:16 msgid "Not master server for this domain" msgstr "並非此一領域的主伺服器" #: nis/nis_error.h:17 msgid "Invalid object for operation" msgstr "不適用的運作物件" #: nis/nis_error.h:18 msgid "Malformed name, or illegal name" msgstr "奇怪的名字，或不合法的名字" #: nis/nis_error.h:19 msgid "Unable to create callback" msgstr "無法建立回叫資料 (callback)" #: nis/nis_error.h:20 msgid "Results sent to callback proc" msgstr "結果傳送給回傳程序" #: nis/nis_error.h:21 msgid "Not found, no such name" msgstr "找不到，沒有此一名稱" #: nis/nis_error.h:22 msgid "Name/entry isn't unique" msgstr "名稱/項目不是唯一的" #: nis/nis_error.h:23 msgid "Modification failed" msgstr "修改失敗" #: nis/nis_error.h:24 msgid "Database for table does not exist" msgstr "表格的資料庫不存在" #: nis/nis_error.h:25 msgid "Entry/table type mismatch" msgstr "項目/表格形態不符" #: nis/nis_error.h:26 msgid "Link points to illegal name" msgstr "連結指向不合法的名稱" #: nis/nis_error.h:27 msgid "Partial success" msgstr "部份成功" #: nis/nis_error.h:28 msgid "Too many attributes" msgstr "太多的屬性" #: nis/nis_error.h:29 msgid "Error in RPC subsystem" msgstr "RPC 子系統錯誤" #: nis/nis_error.h:30 msgid "Missing or malformed attribute" msgstr "缺少或奇怪的屬性" #: nis/nis_error.h:31 msgid "Named object is not searchable" msgstr "有名稱的物件無法搜尋" #: nis/nis_error.h:32 msgid "Error while talking to callback proc" msgstr "在與 callback proc 通訊時錯誤" #: nis/nis_error.h:33 msgid "Non NIS+ namespace encountered" msgstr "遭遇違反 NIS+ 命名規則的名稱" #: nis/nis_error.h:34 msgid "Illegal object type for operation" msgstr "不合法的運作物件形態" #: nis/nis_error.h:35 msgid "Passed object is not the same object on server" msgstr "經過的物件與伺服器上的並不相同" #: nis/nis_error.h:36 msgid "Modify operation failed" msgstr "修改運作方式失敗" #: nis/nis_error.h:37 msgid "Query illegal for named table" msgstr "對記名表格的查詢並不合法" #: nis/nis_error.h:38 msgid "Attempt to remove a non-empty table" msgstr "嘗試刪除一個有內容的表格" #: nis/nis_error.h:39 msgid "Error in accessing NIS+ cold start file. Is NIS+ installed?" msgstr "存取 NIS+ 原始啟動檔錯誤。有安裝 NIS+ 嗎？" #: nis/nis_error.h:40 msgid "Full resync required for directory" msgstr "目錄的 resync 請求已滿" #: nis/nis_error.h:41 msgid "NIS+ operation failed" msgstr "NIS+ 運作失敗" #: nis/nis_error.h:42 msgid "NIS+ service is unavailable or not installed" msgstr "NIS+ 服務無法取得或者尚未安裝" #: nis/nis_error.h:43 msgid "Yes, 42 is the meaning of life" msgstr "是的，42 就是存在的意義" #: nis/nis_error.h:44 msgid "Unable to authenticate NIS+ server" msgstr "無法對 NIS+ 的伺服端進行認證" #: nis/nis_error.h:45 msgid "Unable to authenticate NIS+ client" msgstr "無法對 NIS+ 的請求端進行認證" #: nis/nis_error.h:46 msgid "No file space on server" msgstr "伺服器上沒有檔案空間" #: nis/nis_error.h:47 msgid "Unable to create process on server" msgstr "無法在伺服器上建立執行程序" #: nis/nis_error.h:48 msgid "Master server busy, full dump rescheduled." msgstr "主要伺服器忙碌中，重新進行完整資料傾卸排程。" #: nis/nis_local_names.c:122 #, c-format msgid "LOCAL entry for UID %d in directory %s not unique\n" msgstr "UID 為 %d 的項目在本地端中並不是唯一的 (在 %s 目錄裡面)\n" #: nis/nis_print.c:51 msgid "UNKNOWN" msgstr "不明" #: nis/nis_print.c:109 msgid "BOGUS OBJECT\n" msgstr "假的物件\n" #: nis/nis_print.c:112 msgid "NO OBJECT\n" msgstr "沒有物件\n" #: nis/nis_print.c:115 msgid "DIRECTORY\n" msgstr "目錄\n" #: nis/nis_print.c:118 msgid "GROUP\n" msgstr "群組\n" #: nis/nis_print.c:121 msgid "TABLE\n" msgstr "表格\n" #: nis/nis_print.c:124 msgid "ENTRY\n" msgstr "項目\n" #: nis/nis_print.c:127 msgid "LINK\n" msgstr "連結\n" #: nis/nis_print.c:130 msgid "PRIVATE\n" msgstr "私有的\n" #: nis/nis_print.c:133 msgid "(Unknown object)\n" msgstr "(未知的物件)\n" #: nis/nis_print.c:167 #, c-format msgid "Name : `%s'\n" msgstr "名稱 : `%s'\n" #: nis/nis_print.c:168 #, c-format msgid "Type : %s\n" msgstr "格式 : %s\n" #: nis/nis_print.c:173 msgid "Master Server :\n" msgstr "主要伺服器 :\n" #: nis/nis_print.c:175 msgid "Replicate :\n" msgstr "複製 :\n" #: nis/nis_print.c:176 #, c-format msgid "\tName : %s\n" msgstr "\t名稱 : %s\n" #: nis/nis_print.c:177 msgid "\tPublic Key : " msgstr "\t公共鑰匙 : " #: nis/nis_print.c:181 msgid "None.\n" msgstr "無\n" #: nis/nis_print.c:184 #, c-format msgid "Diffie-Hellmann (%d bits)\n" msgstr "Diffie-Hellmann (%d 位元)\n" #: nis/nis_print.c:189 #, c-format msgid "RSA (%d bits)\n" msgstr "RSA (%d 位元)\n" #: nis/nis_print.c:192 msgid "Kerberos.\n" msgstr "Kerberos.\n" #: nis/nis_print.c:195 #, c-format msgid "Unknown (type = %d, bits = %d)\n" msgstr "未知的 (形態 = %d，位元 = %d)\n" #: nis/nis_print.c:206 #, c-format msgid "\tUniversal addresses (%u)\n" msgstr "\t絕對位址 (%u)\n" #: nis/nis_print.c:228 msgid "Time to live : " msgstr "存在時間 : " #: nis/nis_print.c:230 msgid "Default Access rights :\n" msgstr "預設的存取權限 :\n" #: nis/nis_print.c:239 #, c-format msgid "\tType : %s\n" msgstr "\t型別 : %s\n" #: nis/nis_print.c:240 msgid "\tAccess rights: " msgstr "\t存取權限: " #: nis/nis_print.c:254 msgid "Group Flags :" msgstr "群組旗標 :" #: nis/nis_print.c:257 msgid "" "\n" "Group Members :\n" msgstr "" "\n" "群組的成員 :\n" #: nis/nis_print.c:269 #, c-format msgid "Table Type : %s\n" msgstr "表格形式 : %s\n" #: nis/nis_print.c:270 #, c-format msgid "Number of Columns : %d\n" msgstr "欄位的數目 : %d\n" #: nis/nis_print.c:271 #, c-format msgid "Character Separator : %c\n" msgstr "字元分隔號 : %c\n" #: nis/nis_print.c:272 #, c-format msgid "Search Path : %s\n" msgstr "搜尋路徑 : %s\n" #: nis/nis_print.c:273 msgid "Columns :\n" msgstr "行 :\n" #: nis/nis_print.c:276 #, c-format msgid "\t[%d]\tName : %s\n" msgstr "\t[%d]\t名稱 : %s\n" #: nis/nis_print.c:278 msgid "\t\tAttributes : " msgstr "\t\t屬性 : " #: nis/nis_print.c:280 msgid "\t\tAccess Rights : " msgstr "\t\t存取權限 : " #: nis/nis_print.c:290 msgid "Linked Object Type : " msgstr "連結的物件形態 : " #: nis/nis_print.c:292 #, c-format msgid "Linked to : %s\n" msgstr "連結到 : %s\n" #: nis/nis_print.c:302 #, c-format msgid "\tEntry data of type %s\n" msgstr "\t型別為 %s 的項目資料\n" #: nis/nis_print.c:305 #, c-format msgid "\t[%u] - [%u bytes] " msgstr "\t[%u] - [%u 位元組] " #: nis/nis_print.c:308 msgid "Encrypted data\n" msgstr "編碼資料\n" #: nis/nis_print.c:310 msgid "Binary data\n" msgstr "二進位資料\n" #: nis/nis_print.c:326 #, c-format msgid "Object Name : %s\n" msgstr "物件名稱 : %s\n" #: nis/nis_print.c:327 #, c-format msgid "Directory : %s\n" msgstr "目錄 : %s\n" #: nis/nis_print.c:328 #, c-format msgid "Owner : %s\n" msgstr "擁有者 : %s\n" #: nis/nis_print.c:329 #, c-format msgid "Group : %s\n" msgstr "群組 : %s\n" #: nis/nis_print.c:330 msgid "Access Rights : " msgstr "存取權限 : " #: nis/nis_print.c:332 #, c-format msgid "" "\n" "Time to Live : " msgstr "" "\n" "存在的時間 : " #: nis/nis_print.c:335 #, c-format msgid "Creation Time : %s" msgstr "產生時間 : %s" #: nis/nis_print.c:337 #, c-format msgid "Mod. Time : %s" msgstr "修改時間 : %s" #: nis/nis_print.c:338 msgid "Object Type : " msgstr "物件型別 : " #: nis/nis_print.c:358 #, c-format msgid " Data Length = %u\n" msgstr " 資料長度 = %u\n" #: nis/nis_print.c:372 #, c-format msgid "Status : %s\n" msgstr "狀態 : %s\n" #: nis/nis_print.c:373 #, c-format msgid "Number of objects : %u\n" msgstr "物件的數目 : %u\n" #: nis/nis_print.c:377 #, c-format msgid "Object #%d:\n" msgstr "目的檔 #%d:\n" #: nis/nis_print_group_entry.c:117 #, c-format msgid "Group entry for \"%s.%s\" group:\n" msgstr "群組 \"%s.%s\" 群組項目:\n" #: nis/nis_print_group_entry.c:125 msgid " Explicit members:\n" msgstr " 明確的成員:\n" #: nis/nis_print_group_entry.c:130 msgid " No explicit members\n" msgstr " 沒有明確的成員\n" #: nis/nis_print_group_entry.c:133 msgid " Implicit members:\n" msgstr " 不明確的成員:\n" #: nis/nis_print_group_entry.c:138 msgid " No implicit members\n" msgstr " 沒有不明確的成員\n" #: nis/nis_print_group_entry.c:141 msgid " Recursive members:\n" msgstr " 遞迴的成員:\n" #: nis/nis_print_group_entry.c:146 msgid " No recursive members\n" msgstr " 沒有遞迴的成員\n" #: nis/nis_print_group_entry.c:149 msgid " Explicit nonmembers:\n" msgstr " 明確的非成員:\n" #: nis/nis_print_group_entry.c:154 msgid " No explicit nonmembers\n" msgstr " 沒有明確的非成員\n" #: nis/nis_print_group_entry.c:157 msgid " Implicit nonmembers:\n" msgstr " 不明確的非成員:\n" #: nis/nis_print_group_entry.c:162 msgid " No implicit nonmembers\n" msgstr " 沒有不明確的非成員\n" #: nis/nis_print_group_entry.c:165 #, fuzzy msgid " Recursive nonmembers:\n" msgstr " 遞迴的成員:\n" #: nis/nis_print_group_entry.c:170 msgid " No recursive nonmembers\n" msgstr " 沒有遞迴的非成員\n" #: nis/nss_nisplus/nisplus-publickey.c:101 #: nis/nss_nisplus/nisplus-publickey.c:183 #, c-format msgid "DES entry for netname %s not unique\n" msgstr "netname %s 的 DES 項目並不唯一\n" #: nis/nss_nisplus/nisplus-publickey.c:220 #, fuzzy, c-format msgid "netname2user: missing group id list in `%s'" msgstr "netname2user: `%s' 中缺少群組 id 列表。" #: nis/nss_nisplus/nisplus-publickey.c:302 #: nis/nss_nisplus/nisplus-publickey.c:308 #: nis/nss_nisplus/nisplus-publickey.c:373 #: nis/nss_nisplus/nisplus-publickey.c:382 #, c-format msgid "netname2user: (nis+ lookup): %s\n" msgstr "netname2user: (nis+ 搜尋): %s\n" #: nis/nss_nisplus/nisplus-publickey.c:321 #, c-format msgid "netname2user: DES entry for %s in directory %s not unique" msgstr "netname2user: %s 的 DES 項目在 %s 目錄下並不是唯一的" #: nis/nss_nisplus/nisplus-publickey.c:339 #, c-format msgid "netname2user: principal name `%s' too long" msgstr "netname2user: 主要名稱 `%s' 太長了" #: nis/nss_nisplus/nisplus-publickey.c:395 #, c-format msgid "netname2user: LOCAL entry for %s in directory %s not unique" msgstr "netname2user: %s 的本地端項目在 %s 目錄下並不是唯一的" #: nis/nss_nisplus/nisplus-publickey.c:402 msgid "netname2user: should not have uid 0" msgstr "netname2user: 不能有使用者 id 為 0 的情況" #: nis/ypclnt.c:836 msgid "Request arguments bad" msgstr "必須引數有錯誤" #: nis/ypclnt.c:839 msgid "RPC failure on NIS operation" msgstr "NIS 運作 RPC 失敗" #: nis/ypclnt.c:842 msgid "Can't bind to server which serves this domain" msgstr "無法與服務於此網域的伺服器聯繫" #: nis/ypclnt.c:845 msgid "No such map in server's domain" msgstr "在伺服器的領域資料中找不到此一對映表" #: nis/ypclnt.c:848 msgid "No such key in map" msgstr "在對映表中沒有此一鍵值" #: nis/ypclnt.c:851 msgid "Internal NIS error" msgstr "內部 NIS 錯誤" #: nis/ypclnt.c:854 msgid "Local resource allocation failure" msgstr "區域資源配置失敗" #: nis/ypclnt.c:857 msgid "No more records in map database" msgstr "在對映表資料庫中沒有其他紀錄了" #: nis/ypclnt.c:860 msgid "Can't communicate with portmapper" msgstr "無法與 portmapper 通訊" #: nis/ypclnt.c:863 msgid "Can't communicate with ypbind" msgstr "無法與 ypbind 通訊" #: nis/ypclnt.c:866 msgid "Can't communicate with ypserv" msgstr "無法與 ypserv 通訊" #: nis/ypclnt.c:869 msgid "Local domain name not set" msgstr "區域網域名稱沒有設定" #: nis/ypclnt.c:872 msgid "NIS map database is bad" msgstr "NIS 對映資料庫是壞的" #: nis/ypclnt.c:875 msgid "NIS client/server version mismatch - can't supply service" msgstr "NIS 請求端/伺服端版本不符合 - 無法提供服務" #: nis/ypclnt.c:881 msgid "Database is busy" msgstr "資料庫正在忙碌" #: nis/ypclnt.c:884 msgid "Unknown NIS error code" msgstr "未知的 NIS 錯誤碼" #: nis/ypclnt.c:924 msgid "Internal ypbind error" msgstr "內部 ypbind 錯誤" #: nis/ypclnt.c:927 msgid "Domain not bound" msgstr "網域找不到" #: nis/ypclnt.c:930 msgid "System resource allocation failure" msgstr "系統資源配置失敗" #: nis/ypclnt.c:933 msgid "Unknown ypbind error" msgstr "未知的 ypbind 錯誤" #: nis/ypclnt.c:974 msgid "yp_update: cannot convert host to netname\n" msgstr "yp_update: 無法轉換主機的網路名稱\n" #: nis/ypclnt.c:992 msgid "yp_update: cannot get server address\n" msgstr "yp_update: 無法取得伺服器位址\n" #: nscd/aicache.c:82 nscd/hstcache.c:481 #, c-format msgid "Haven't found \"%s\" in hosts cache!" msgstr "尚未在 hosts 快取中找到 \"%s\"!" #: nscd/aicache.c:84 nscd/hstcache.c:483 #, fuzzy, c-format msgid "Reloading \"%s\" in hosts cache!" msgstr "尚未在 hosts 快取中找到 \"%s\"!" #: nscd/cache.c:150 #, c-format msgid "add new entry \"%s\" of type %s for %s to cache%s" msgstr "" #: nscd/cache.c:152 msgid " (first)" msgstr "" #: nscd/cache.c:286 nscd/connections.c:866 #, c-format msgid "cannot stat() file `%s': %s" msgstr "無法 stat() 檔案 `%s': %s" #: nscd/cache.c:328 #, c-format msgid "pruning %s cache; time %ld" msgstr "" #: nscd/cache.c:357 #, c-format msgid "considering %s entry \"%s\", timeout %" msgstr "" #: nscd/connections.c:570 #, c-format msgid "invalid persistent database file \"%s\": %s" msgstr "" #: nscd/connections.c:578 #, fuzzy msgid "uninitialized header" msgstr "無效的 ELF 標頭" #: nscd/connections.c:583 msgid "header size does not match" msgstr "" #: nscd/connections.c:593 #, fuzzy msgid "file size does not match" msgstr "ELF 檔版本不符合目前的版本" #: nscd/connections.c:610 #, fuzzy msgid "verification failed" msgstr "修改失敗" #: nscd/connections.c:624 #, c-format msgid "suggested size of table for database %s larger than the persistent database's table" msgstr "" #: nscd/connections.c:635 nscd/connections.c:720 #, fuzzy, c-format msgid "cannot create read-only descriptor for \"%s\"; no mmap" msgstr "無法建立內部敘述項" #: nscd/connections.c:651 #, fuzzy, c-format msgid "cannot access '%s'" msgstr "無法開啟 `%s'" #: nscd/connections.c:699 #, c-format msgid "database for %s corrupted or simultaneously used; remove %s manually if necessary and restart" msgstr "" #: nscd/connections.c:706 #, fuzzy, c-format msgid "cannot create %s; no persistent database used" msgstr "無法建立作用域列表" #: nscd/connections.c:709 #, fuzzy, c-format msgid "cannot create %s; no sharing possible" msgstr "無法產生暫時檔" #: nscd/connections.c:780 #, fuzzy, c-format msgid "cannot write to database file %s: %s" msgstr "無法寫入統計資料: %s" #: nscd/connections.c:819 #, c-format msgid "cannot set socket to close on exec: %s; disabling paranoia mode" msgstr "" #: nscd/connections.c:902 #, c-format msgid "cannot open socket: %s" msgstr "無法開啟 socket: %s" #: nscd/connections.c:922 #, fuzzy, c-format msgid "cannot change socket to nonblocking mode: %s" msgstr "無法開啟 socket 來接受連線: %s" #: nscd/connections.c:930 #, fuzzy, c-format msgid "cannot set socket to close on exec: %s" msgstr "無法開啟 socket 來接受連線: %s" #: nscd/connections.c:943 #, c-format msgid "cannot enable socket to accept connections: %s" msgstr "無法開啟 socket 來接受連線: %s" #: nscd/connections.c:1043 #, c-format msgid "provide access to FD %d, for %s" msgstr "" #: nscd/connections.c:1055 #, c-format msgid "cannot handle old request version %d; current version is %d" msgstr "不能處理舊 %d 版的請求；目前使用的版本是 %d" #: nscd/connections.c:1077 #, c-format msgid "request from %ld not handled due to missing permission" msgstr "" #: nscd/connections.c:1082 #, c-format msgid "request from '%s' [%ld] not handled due to missing permission" msgstr "" #: nscd/connections.c:1087 msgid "request not handled due to missing permission" msgstr "" #: nscd/connections.c:1125 nscd/connections.c:1178 #, c-format msgid "cannot write result: %s" msgstr "無法寫入結果: %s" #: nscd/connections.c:1261 #, fuzzy, c-format msgid "error getting caller's id: %s" msgstr "取得呼叫程式識別碼時發生錯誤: %s" #: nscd/connections.c:1320 #, c-format msgid "cannot open /proc/self/cmdline: %s; disabling paranoia mode" msgstr "" #: nscd/connections.c:1334 #, c-format msgid "cannot read /proc/self/cmdline: %s; disabling paranoia mode" msgstr "" #: nscd/connections.c:1374 #, c-format msgid "cannot change to old UID: %s; disabling paranoia mode" msgstr "" #: nscd/connections.c:1384 #, c-format msgid "cannot change to old GID: %s; disabling paranoia mode" msgstr "" #: nscd/connections.c:1397 #, c-format msgid "cannot change to old working directory: %s; disabling paranoia mode" msgstr "" #: nscd/connections.c:1429 #, c-format msgid "re-exec failed: %s; disabling paranoia mode" msgstr "" #: nscd/connections.c:1438 #, c-format msgid "cannot change current working directory to \"/\": %s" msgstr "" #: nscd/connections.c:1644 #, c-format msgid "short read while reading request: %s" msgstr "讀取請求時發現輸入值過短: %s" #: nscd/connections.c:1677 #, c-format msgid "key length in request too long: %d" msgstr "在此請求中使用的鍵值太長了: %d" #: nscd/connections.c:1690 #, c-format msgid "short read while reading request key: %s" msgstr "讀取請求的鍵值時發現輸入值過短: %s" #: nscd/connections.c:1699 #, c-format msgid "handle_request: request received (Version = %d) from PID %ld" msgstr "handle_request: 請求已被接受 (版本為 %d) 來自於 PID %ld" #: nscd/connections.c:1704 #, c-format msgid "handle_request: request received (Version = %d)" msgstr "handle_request: 請求已被接受 (版本為 %d)" #: nscd/connections.c:1903 nscd/connections.c:2101 #, c-format msgid "disabled inotify after read error %d" msgstr "" #: nscd/connections.c:2230 #, fuzzy msgid "could not initialize conditional variable" msgstr "無法起始保存檔" #: nscd/connections.c:2238 msgid "could not start clean-up thread; terminating" msgstr "" #: nscd/connections.c:2252 msgid "could not start any worker thread; terminating" msgstr "" #: nscd/connections.c:2303 nscd/connections.c:2304 nscd/connections.c:2321 #: nscd/connections.c:2330 nscd/connections.c:2348 nscd/connections.c:2359 #: nscd/connections.c:2370 #, c-format msgid "Failed to run nscd as user '%s'" msgstr "以使用者 '%s' 的身分執行 nscd 失敗" #: nscd/connections.c:2322 #, fuzzy, c-format msgid "initial getgrouplist failed" msgstr "getgrouplist 失敗" #: nscd/connections.c:2331 #, c-format msgid "getgrouplist failed" msgstr "getgrouplist 失敗" #: nscd/connections.c:2349 #, c-format msgid "setgroups failed" msgstr "setgroups 失敗" #: nscd/grpcache.c:395 nscd/hstcache.c:430 nscd/initgrcache.c:416 #: nscd/pwdcache.c:400 nscd/servicescache.c:343 #, c-format msgid "short write in %s: %s" msgstr "寫入 %s 的資料過短: %s" #: nscd/grpcache.c:438 nscd/initgrcache.c:78 #, c-format msgid "Haven't found \"%s\" in group cache!" msgstr "尚未在群組快取中找到 \"%s\"!" #: nscd/grpcache.c:440 nscd/initgrcache.c:80 #, fuzzy, c-format msgid "Reloading \"%s\" in group cache!" msgstr "尚未在群組快取中找到 \"%s\"!" #: nscd/grpcache.c:517 #, c-format msgid "Invalid numeric gid \"%s\"!" msgstr "無效的 gid 數值 \"%s\"!" #: nscd/mem.c:457 #, c-format msgid "freed %zu bytes in %s cache" msgstr "" #: nscd/mem.c:594 #, fuzzy, c-format msgid "no more memory for database '%s'" msgstr "在對映表資料庫中沒有其他紀錄了" #: nscd/nscd.c:101 msgid "Read configuration data from NAME" msgstr "自名稱中讀取設定資料" #: nscd/nscd.c:103 msgid "Do not fork and display messages on the current tty" msgstr "不在目前的 tty 產生子行程 (fork) 以及顯示訊息" #: nscd/nscd.c:104 msgid "NUMBER" msgstr "號碼" #: nscd/nscd.c:104 msgid "Start NUMBER threads" msgstr "啟動執行緒" #: nscd/nscd.c:105 msgid "Shut the server down" msgstr "將伺服器關閉" #: nscd/nscd.c:106 #, fuzzy msgid "Print current configuration statistics" msgstr "印出目前的組態統計" #: nscd/nscd.c:107 msgid "TABLE" msgstr "表格" #: nscd/nscd.c:108 msgid "Invalidate the specified cache" msgstr "使選定的快取無效" #: nscd/nscd.c:109 msgid "TABLE,yes" msgstr "要製作表格" #: nscd/nscd.c:110 msgid "Use separate cache for each user" msgstr "對不同使用者使用不同的快取檔案" #: nscd/nscd.c:115 msgid "Name Service Cache Daemon." msgstr "網域名稱快取精靈" #: nscd/nscd.c:147 nss/getent.c:876 nss/makedb.c:123 #, c-format msgid "wrong number of arguments" msgstr "參數數目不對" #: nscd/nscd.c:157 #, fuzzy, c-format msgid "failure while reading configuration file; this is fatal" msgstr "無法讀取設定檔，這是一個嚴重錯誤" #: nscd/nscd.c:166 #, c-format msgid "already running" msgstr "已在執行" #: nscd/nscd.c:181 nscd/nscd.c:236 #, fuzzy, c-format msgid "cannot fork" msgstr "無法開啟" #: nscd/nscd.c:244 #, c-format msgid "cannot change current working directory to \"/\"" msgstr "" #: nscd/nscd.c:252 #, fuzzy msgid "Could not create log file" msgstr "無法產生訊息檔 \"%s\"" #: nscd/nscd.c:305 nscd/nscd.c:330 nscd/nscd_stat.c:172 #, c-format msgid "Only root is allowed to use this option!" msgstr "只有 root 才可以使用此一選項!" #: nscd/nscd.c:345 #, fuzzy, c-format msgid "'%s' is not a known database" msgstr "%s 不是一個已知的函式庫型態" #: nscd/nscd.c:370 nscd/nscd_stat.c:191 #, c-format msgid "write incomplete" msgstr "寫入不完全" #: nscd/nscd.c:381 #, fuzzy, c-format msgid "cannot read invalidate ACK" msgstr "無法讀取檔案資料" #: nscd/nscd.c:387 #, fuzzy, c-format msgid "invalidation failed" msgstr "修改失敗" #: nscd/nscd.c:397 #, c-format msgid "secure services not implemented anymore" msgstr "" #: nscd/nscd_conf.c:57 #, fuzzy, c-format msgid "database %s is not supported" msgstr "不支援到 `%s' 的轉換" #: nscd/nscd_conf.c:108 #, c-format msgid "Parse error: %s" msgstr "解析錯誤: %s" #: nscd/nscd_conf.c:194 #, c-format msgid "Must specify user name for server-user option" msgstr "必須為伺服器使用者選項指定使用者名稱" #: nscd/nscd_conf.c:201 #, c-format msgid "Must specify user name for stat-user option" msgstr "必須為 stat 使用者選項指定使用者名稱" #: nscd/nscd_conf.c:245 #, fuzzy, c-format msgid "invalid value for 'reload-count': %u" msgstr "%s: 在欄位 `%s' 中的值不適用" #: nscd/nscd_conf.c:260 #, fuzzy, c-format msgid "Must specify value for restart-interval option" msgstr "必須為 stat 使用者選項指定使用者名稱" #: nscd/nscd_conf.c:274 #, c-format msgid "Unknown option: %s %s %s" msgstr "未知的選項: %s %s %s" #: nscd/nscd_conf.c:287 #, c-format msgid "cannot get current working directory: %s; disabling paranoia mode" msgstr "" #: nscd/nscd_conf.c:307 #, c-format msgid "maximum file size for %s database too small" msgstr "" #: nscd/nscd_stat.c:141 #, c-format msgid "cannot write statistics: %s" msgstr "無法寫入統計資料: %s" #: nscd/nscd_stat.c:156 msgid "yes" msgstr "" #: nscd/nscd_stat.c:157 msgid "no" msgstr "" #: nscd/nscd_stat.c:168 #, c-format msgid "Only root or %s is allowed to use this option!" msgstr "只有 root 或 %s 才允許使用此一選項!" #: nscd/nscd_stat.c:179 #, c-format msgid "nscd not running!\n" msgstr "nscd 並沒有在執行!\n" #: nscd/nscd_stat.c:203 #, c-format msgid "cannot read statistics data" msgstr "無法讀取統計資料" #: nscd/nscd_stat.c:206 #, c-format msgid "" "nscd configuration:\n" "\n" "%15d server debug level\n" msgstr "" "nscd 設定:\n" "\n" "%15d 伺服程式錯誤訊息報告等級\n" #: nscd/nscd_stat.c:230 #, c-format msgid "%3ud %2uh %2um %2lus server runtime\n" msgstr "%3ud %2uh %2um %2lus 伺服器 執行時期\n" #: nscd/nscd_stat.c:233 #, c-format msgid " %2uh %2um %2lus server runtime\n" msgstr " %2uh %2um %2lus 伺服器 執行時期\n" #: nscd/nscd_stat.c:235 #, c-format msgid " %2um %2lus server runtime\n" msgstr " %2um %2lus 伺服器 執行時期\n" #: nscd/nscd_stat.c:237 #, c-format msgid " %2lus server runtime\n" msgstr " %2lus 伺服器 執行時期\n" #: nscd/nscd_stat.c:239 #, c-format msgid "" "%15d current number of threads\n" "%15d maximum number of threads\n" "%15lu number of times clients had to wait\n" "%15s paranoia mode enabled\n" "%15lu restart internal\n" msgstr "" #: nscd/nscd_stat.c:273 #, fuzzy, c-format msgid "" "\n" "%s cache:\n" "\n" "%15s cache is enabled\n" "%15s cache is persistent\n" "%15s cache is shared\n" "%15zu suggested size\n" "%15zu total data pool size\n" "%15zu used data pool size\n" "%15lu seconds time to live for positive entries\n" "%15lu seconds time to live for negative entries\n" "%15 cache hits on positive entries\n" "%15 cache hits on negative entries\n" "%15 cache misses on positive entries\n" "%15 cache misses on negative entries\n" "%15lu%% cache hit rate\n" "%15zu current number of cached values\n" "%15zu maximum number of cached values\n" "%15zu maximum chain length searched\n" "%15 number of delays on rdlock\n" "%15 number of delays on wrlock\n" "%15 memory allocations failed\n" "%15s check /etc/%s for changes\n" msgstr "" "\n" "%s 快取:\n" "\n" "%15s 快取已開啟\n" "%15Zu 希望的大小\n" "%15lu 正項目的存在時間 (秒)\n" "%15lu 負項目的存在時間 (秒)\n" "%15lu 正項目中找到快取數\n" "%15lu 負項目中找到快取數\n" "%15lu 正項目中遺漏的快取數\n" "%15lu 負項目中遺漏的快取數\n" "%15lu%% 快取找到的比例\n" "%15lu 目前已快取數值量\n" "%15lu 最大快取數值量\n" "%15lu 最大已搜尋的鏈結長度\n" "%15lu 在 rdlock 上的延遲數量\n" "%15lu 在 wrlock 上的延遲數量\n" "%15s 檢查 /etc/%s 的改變\n" #: nscd/pwdcache.c:443 #, c-format msgid "Haven't found \"%s\" in password cache!" msgstr "尚未在密碼快取中找到 \"%s\"!" #: nscd/pwdcache.c:445 #, fuzzy, c-format msgid "Reloading \"%s\" in password cache!" msgstr "尚未在密碼快取中找到 \"%s\"!" #: nscd/pwdcache.c:523 #, c-format msgid "Invalid numeric uid \"%s\"!" msgstr "無效的 uid 數值 \"%s\"!" #: nscd/selinux.c:156 #, c-format msgid "Failed opening connection to the audit subsystem: %m" msgstr "" #: nscd/selinux.c:177 msgid "Failed to set keep-capabilities" msgstr "" #: nscd/selinux.c:178 nscd/selinux.c:241 #, c-format msgid "prctl(KEEPCAPS) failed" msgstr "" #: nscd/selinux.c:192 msgid "Failed to initialize drop of capabilities" msgstr "" #: nscd/selinux.c:193 #, fuzzy, c-format msgid "cap_init failed" msgstr "lstat 失敗" #: nscd/selinux.c:214 nscd/selinux.c:231 msgid "Failed to drop capabilities" msgstr "" #: nscd/selinux.c:215 nscd/selinux.c:232 #, fuzzy, c-format msgid "cap_set_proc failed" msgstr "setgroups 失敗" #: nscd/selinux.c:240 msgid "Failed to unset keep-capabilities" msgstr "" #: nscd/selinux.c:256 msgid "Failed to determine if kernel supports SELinux" msgstr "" #: nscd/selinux.c:271 #, c-format msgid "Failed to start AVC thread" msgstr "" #: nscd/selinux.c:293 #, fuzzy, c-format msgid "Failed to create AVC lock" msgstr "無法建立回叫資料 (callback)" #: nscd/selinux.c:333 #, fuzzy, c-format msgid "Failed to start AVC" msgstr "檔案太大" #: nscd/selinux.c:335 msgid "Access Vector Cache (AVC) started" msgstr "" #: nscd/selinux.c:356 msgid "Error getting context of socket peer" msgstr "" #: nscd/selinux.c:361 #, fuzzy msgid "Error getting context of nscd" msgstr "取得呼叫程式識別碼時發生錯誤: %s" #: nscd/selinux.c:367 #, fuzzy msgid "Error getting sid from context" msgstr "寫入標準輸出時錯誤" #: nscd/selinux.c:374 msgid "compile-time support for database policy missing" msgstr "" #: nscd/selinux.c:407 #, c-format msgid "" "\n" "SELinux AVC Statistics:\n" "\n" "%15u entry lookups\n" "%15u entry hits\n" "%15u entry misses\n" "%15u entry discards\n" "%15u CAV lookups\n" "%15u CAV hits\n" "%15u CAV probes\n" "%15u CAV misses\n" msgstr "" #: nscd/servicescache.c:390 #, fuzzy, c-format msgid "Haven't found \"%s\" in services cache!" msgstr "尚未在 hosts 快取中找到 \"%s\"!" #: nscd/servicescache.c:392 #, fuzzy, c-format msgid "Reloading \"%s\" in services cache!" msgstr "尚未在 hosts 快取中找到 \"%s\"!" #: nss/getent.c:52 msgid "database [key ...]" msgstr "資料庫 [鍵值...]" #: nss/getent.c:57 msgid "Service configuration to be used" msgstr "將要使用的服務設定" #: nss/getent.c:62 #, fuzzy msgid "Get entries from administrative database." msgstr "getent - 從管理資料庫中取得項目內容。" #: nss/getent.c:143 nss/getent.c:408 #, c-format msgid "Enumeration not supported on %s\n" msgstr "此項目在 %s 中不被支援\n" #: nss/getent.c:794 #, fuzzy, c-format msgid "Unknown database name" msgstr "未知的資料庫: %s\n" #: nss/getent.c:820 #, fuzzy msgid "Supported databases:\n" msgstr "支援的資料庫:" #: nss/getent.c:886 #, c-format msgid "Unknown database: %s\n" msgstr "未知的資料庫: %s\n" #: nss/makedb.c:60 msgid "Convert key to lower case" msgstr "" #: nss/makedb.c:63 msgid "Do not print messages while building database" msgstr "" #: nss/makedb.c:65 msgid "Print content of database file, one entry a line" msgstr "" #: nss/makedb.c:70 msgid "Create simple DB database from textual input." msgstr "" #: nss/makedb.c:73 #, fuzzy msgid "" "INPUT-FILE OUTPUT-FILE\n" "-o OUTPUT-FILE INPUT-FILE\n" "-u INPUT-FILE" msgstr "" "-o 輸出檔案名稱 [輸入檔案名稱]...\n" "[輸出檔案名稱 [輸入檔案名稱]...]" #: nss/makedb.c:142 #, fuzzy, c-format msgid "No usable database library found." msgstr "NIS 對映資料庫是壞的" #: nss/makedb.c:149 #, fuzzy, c-format msgid "cannot open database file `%s': %s" msgstr "無法開啟輸入檔 `%s'" #: nss/makedb.c:151 msgid "incorrectly formatted file" msgstr "" #: nss/makedb.c:331 #, fuzzy msgid "duplicate key" msgstr "複製 :\n" #: nss/makedb.c:337 #, fuzzy, c-format msgid "while writing database file" msgstr "在對測試資料檔案進行統計的時候" #: nss/makedb.c:348 #, fuzzy, c-format msgid "problems while reading `%s'" msgstr "正在讀入資料的時候發生錯誤" #: nss/makedb.c:368 nss/makedb.c:385 #, fuzzy, c-format msgid "while reading database" msgstr "在準備輸出時" #: posix/getconf.c:945 #, c-format msgid "Usage: %s [-v specification] variable_name [pathname]\n" msgstr "用法: %s [-v 規格] 變數名稱 [路徑名稱]\n" #: posix/getconf.c:948 #, c-format msgid " %s -a [pathname]\n" msgstr "" #: posix/getconf.c:1023 #, c-format msgid "" "Usage: getconf [-v SPEC] VAR\n" " or: getconf [-v SPEC] PATH_VAR PATH\n" "\n" "Get the configuration value for variable VAR, or for variable PATH_VAR\n" "for path PATH. If SPEC is given, give values for compilation\n" "environment SPEC.\n" "\n" msgstr "" #: posix/getconf.c:1081 #, c-format msgid "unknown specification \"%s\"" msgstr "不明的規格 \"%s\"" #: posix/getconf.c:1109 #, c-format msgid "Couldn't execute %s" msgstr "" #: posix/getconf.c:1149 posix/getconf.c:1165 msgid "undefined" msgstr "未定義" #: posix/getconf.c:1187 #, c-format msgid "Unrecognized variable `%s'" msgstr "無法識別的變數 `%s'" #: posix/getopt.c:570 posix/getopt.c:586 #, fuzzy, c-format msgid "%s: option '%s' is ambiguous\n" msgstr "%s: 選項 `%s' 含義不清\n" #: posix/getopt.c:619 posix/getopt.c:623 #, fuzzy, c-format msgid "%s: option '--%s' doesn't allow an argument\n" msgstr "%s: 選項 `--%s' 不允許附加引數\n" #: posix/getopt.c:632 posix/getopt.c:637 #, fuzzy, c-format msgid "%s: option '%c%s' doesn't allow an argument\n" msgstr "%s: 選項 `%c%s' 不允許附加引數\n" #: posix/getopt.c:680 posix/getopt.c:699 posix/getopt.c:1002 #: posix/getopt.c:1021 #, fuzzy, c-format msgid "%s: option '%s' requires an argument\n" msgstr "%s: 選項 `%s' 需要一個引數\n" #: posix/getopt.c:737 posix/getopt.c:740 #, fuzzy, c-format msgid "%s: unrecognized option '--%s'\n" msgstr "%s: 未知的選項 `--%s'\n" #: posix/getopt.c:748 posix/getopt.c:751 #, fuzzy, c-format msgid "%s: unrecognized option '%c%s'\n" msgstr "%s: 未知的選項 `%c%s'\n" #: posix/getopt.c:800 posix/getopt.c:803 #, fuzzy, c-format msgid "%s: invalid option -- '%c'\n" msgstr "%s: 不適用的選項 -- %c\n" #: posix/getopt.c:853 posix/getopt.c:870 posix/getopt.c:1073 #: posix/getopt.c:1091 #, fuzzy, c-format msgid "%s: option requires an argument -- '%c'\n" msgstr "%s: 選項需要一個引數 -- %c\n" #: posix/getopt.c:923 posix/getopt.c:939 #, fuzzy, c-format msgid "%s: option '-W %s' is ambiguous\n" msgstr "%s: 選項 `-W %s' 含義不清\n" #: posix/getopt.c:963 posix/getopt.c:981 #, fuzzy, c-format msgid "%s: option '-W %s' doesn't allow an argument\n" msgstr "%s: 選項 `-W %s' 不允許附加引數\n" #: posix/regcomp.c:136 msgid "No match" msgstr "沒有符合的項目" #: posix/regcomp.c:139 msgid "Invalid regular expression" msgstr "不適用的常規表示式" #: posix/regcomp.c:142 msgid "Invalid collation character" msgstr "不適用的對照字元" #: posix/regcomp.c:145 msgid "Invalid character class name" msgstr "不適用的字元類別名" #: posix/regcomp.c:148 msgid "Trailing backslash" msgstr "尾端的反斜線" #: posix/regcomp.c:151 msgid "Invalid back reference" msgstr "不適用的後部索引" #: posix/regcomp.c:154 msgid "Unmatched [ or [^" msgstr "[ 或 [^ 不能匹配" #: posix/regcomp.c:157 msgid "Unmatched ( or \\(" msgstr "( 或 \\( 不能匹配" #: posix/regcomp.c:160 msgid "Unmatched \\{" msgstr "\\{ 不能匹配" #: posix/regcomp.c:163 msgid "Invalid content of \\{\\}" msgstr "不適用的 \\{\\} 內容" #: posix/regcomp.c:166 msgid "Invalid range end" msgstr "不適用的範圍結束" #: posix/regcomp.c:169 msgid "Memory exhausted" msgstr "記憶體用完了" #: posix/regcomp.c:172 msgid "Invalid preceding regular expression" msgstr "不適用的前置常規表示式" #: posix/regcomp.c:175 msgid "Premature end of regular expression" msgstr "常規表示式太早結束了" #: posix/regcomp.c:178 msgid "Regular expression too big" msgstr "正規表示式太長了" #: posix/regcomp.c:181 msgid "Unmatched ) or \\)" msgstr ") 或 \\) 不能匹配" #: posix/regcomp.c:681 msgid "No previous regular expression" msgstr "先前並未使用過常規表示式" #: posix/wordexp.c:1832 msgid "parameter null or not set" msgstr "參數為空字元或是未設置" #: resolv/herror.c:68 msgid "Resolver Error 0 (no error)" msgstr "解讀錯誤碼 0 (沒有錯誤)" #: resolv/herror.c:69 msgid "Unknown host" msgstr "未知的遠端位址" #: resolv/herror.c:70 msgid "Host name lookup failure" msgstr "遠端系統名稱搜尋失敗" #: resolv/herror.c:71 msgid "Unknown server error" msgstr "未知的伺服器錯誤" #: resolv/herror.c:72 msgid "No address associated with name" msgstr "沒有此名稱所對應的位址" #: resolv/herror.c:107 msgid "Resolver internal error" msgstr "內部解讀錯誤" #: resolv/herror.c:110 msgid "Unknown resolver error" msgstr "未知的解讀錯誤" #: resolv/res_hconf.c:124 #, c-format msgid "%s: line %d: cannot specify more than %d trim domains" msgstr "%s: 第 %d 列: 無法指定超過 %d 個修剪範圍" #: resolv/res_hconf.c:145 #, c-format msgid "%s: line %d: list delimiter not followed by domain" msgstr "%s: 第 %d 列: 範圍不可跟在表列分隔字元之後" #: resolv/res_hconf.c:204 #, c-format msgid "%s: line %d: expected `on' or `off', found `%s'\n" msgstr "%s: 第 %d 列: 預期為 `on' 或 `off'，卻發現 `%s'\n" #: resolv/res_hconf.c:247 #, c-format msgid "%s: line %d: bad command `%s'\n" msgstr "%s: 第 %d 列: 不當的命令 `%s'\n" #: resolv/res_hconf.c:282 #, c-format msgid "%s: line %d: ignoring trailing garbage `%s'\n" msgstr "%s: 第 %d 列: 正在忽略尾端的無用資料 `%s'\n" #: stdio-common/psignal.c:51 #, c-format msgid "%s%sUnknown signal %d\n" msgstr "%s%s未知的訊號 %d\n" #: stdio-common/psignal.c:52 #, fuzzy msgid "Unknown signal" msgstr "未知的訊號 %d" #: string/_strerror.c:45 sysdeps/mach/_strerror.c:87 msgid "Unknown error " msgstr "未知的錯誤 " #: string/strerror.c:43 msgid "Unknown error" msgstr "未知的錯誤" #: string/strsignal.c:65 #, c-format msgid "Real-time signal %d" msgstr "即時的訊號 %d" #: string/strsignal.c:69 #, c-format msgid "Unknown signal %d" msgstr "未知的訊號 %d" #: sunrpc/auth_unix.c:114 sunrpc/clnt_tcp.c:131 sunrpc/clnt_udp.c:143 #: sunrpc/clnt_unix.c:128 sunrpc/svc_tcp.c:179 sunrpc/svc_tcp.c:218 #: sunrpc/svc_udp.c:153 sunrpc/svc_unix.c:176 sunrpc/svc_unix.c:215 #: sunrpc/xdr.c:566 sunrpc/xdr.c:718 sunrpc/xdr_array.c:106 #: sunrpc/xdr_rec.c:156 sunrpc/xdr_ref.c:85 #, fuzzy msgid "out of memory\n" msgstr "記憶體不足" #: sunrpc/auth_unix.c:350 #, fuzzy msgid "auth_unix.c: Fatal marshalling problem" msgstr "auth_none.c - 嚴重的排序問題" #: sunrpc/clnt_perr.c:105 sunrpc/clnt_perr.c:121 #, fuzzy, c-format msgid "%s: %s; low version = %lu, high version = %lu" msgstr "; 低版本 = %lu, 高版本 = %lu" #: sunrpc/clnt_perr.c:112 #, fuzzy, c-format msgid "%s: %s; why = %s\n" msgstr "; 原因 = " #: sunrpc/clnt_perr.c:114 #, fuzzy, c-format msgid "%s: %s; why = (unknown authentication error - %d)\n" msgstr "(未知鑑定錯誤 - %d)" #: sunrpc/clnt_perr.c:159 msgid "RPC: Success" msgstr "RPC: 成功" #: sunrpc/clnt_perr.c:162 msgid "RPC: Can't encode arguments" msgstr "RPC: 無法將引數編碼" #: sunrpc/clnt_perr.c:166 msgid "RPC: Can't decode result" msgstr "RPC: 無法解碼得出結果" #: sunrpc/clnt_perr.c:170 msgid "RPC: Unable to send" msgstr "RPC: 無法傳送" #: sunrpc/clnt_perr.c:174 msgid "RPC: Unable to receive" msgstr "RPC: 無法接收" #: sunrpc/clnt_perr.c:178 msgid "RPC: Timed out" msgstr "RPC: 超過時間上限" #: sunrpc/clnt_perr.c:182 msgid "RPC: Incompatible versions of RPC" msgstr "RPC: RPC 版本不相容" #: sunrpc/clnt_perr.c:186 msgid "RPC: Authentication error" msgstr "RPC: 認證錯誤" #: sunrpc/clnt_perr.c:190 msgid "RPC: Program unavailable" msgstr "RPC: 程式不存在" #: sunrpc/clnt_perr.c:194 msgid "RPC: Program/version mismatch" msgstr "RPC: 程式/版本不符" #: sunrpc/clnt_perr.c:198 msgid "RPC: Procedure unavailable" msgstr "RPC: 無法取得程序" #: sunrpc/clnt_perr.c:202 msgid "RPC: Server can't decode arguments" msgstr "RPC: 伺服器無法將引數解碼" #: sunrpc/clnt_perr.c:206 msgid "RPC: Remote system error" msgstr "RPC: 遠端程式錯誤" #: sunrpc/clnt_perr.c:210 msgid "RPC: Unknown host" msgstr "RPC: 未知的遠端位址" #: sunrpc/clnt_perr.c:214 msgid "RPC: Unknown protocol" msgstr "RPC: 未知的協定" #: sunrpc/clnt_perr.c:218 msgid "RPC: Port mapper failure" msgstr "RPC: 通訊阜對映錯誤" #: sunrpc/clnt_perr.c:222 msgid "RPC: Program not registered" msgstr "RPC: 程式沒有註冊" #: sunrpc/clnt_perr.c:226 msgid "RPC: Failed (unspecified error)" msgstr "RPC: 失敗 (非特定的錯誤)" #: sunrpc/clnt_perr.c:267 msgid "RPC: (unknown error code)" msgstr "RPC: (未知的錯誤碼)" #: sunrpc/clnt_perr.c:330 msgid "Authentication OK" msgstr "鑑定完成" #: sunrpc/clnt_perr.c:333 msgid "Invalid client credential" msgstr "不適用的請求端身份認證" #: sunrpc/clnt_perr.c:337 msgid "Server rejected credential" msgstr "伺服器拒絕身份證明" #: sunrpc/clnt_perr.c:341 msgid "Invalid client verifier" msgstr "不適用的請求端認證" #: sunrpc/clnt_perr.c:345 msgid "Server rejected verifier" msgstr "伺服器拒絕認證" #: sunrpc/clnt_perr.c:349 msgid "Client credential too weak" msgstr "用戶端背景太弱" #: sunrpc/clnt_perr.c:353 msgid "Invalid server verifier" msgstr "不適用的服務認證" #: sunrpc/clnt_perr.c:357 msgid "Failed (unspecified error)" msgstr "失敗 (沒有指定的錯誤)" #: sunrpc/clnt_raw.c:117 #, fuzzy msgid "clnt_raw.c: fatal header serialization error" msgstr "clnt_raw.c - 嚴重的標頭序列化錯誤。" #: sunrpc/pm_getmaps.c:83 #, fuzzy msgid "pmap_getmaps.c: rpc problem" msgstr "pmap_getmaps 遠端程序呼叫問題" #: sunrpc/pmap_clnt.c:129 msgid "Cannot register service" msgstr "無法註冊服務" #: sunrpc/pmap_rmt.c:248 msgid "Cannot create socket for broadcast rpc" msgstr "無法為廣播式遠端程序呼叫 (broadcast rpc) 產生 socket" #: sunrpc/pmap_rmt.c:255 msgid "Cannot set socket option SO_BROADCAST" msgstr "無法設定 socket 選項 SO_BROADCAST" #: sunrpc/pmap_rmt.c:307 msgid "Cannot send broadcast packet" msgstr "無法傳送廣播封包" #: sunrpc/pmap_rmt.c:332 msgid "Broadcast poll problem" msgstr "Broadcast 調查有問題" #: sunrpc/pmap_rmt.c:345 msgid "Cannot receive reply to broadcast" msgstr "無法接受廣播後的回應" #: sunrpc/rpc_main.c:290 #, c-format msgid "%s: output would overwrite %s\n" msgstr "%s: 輸出將會覆蓋 %s\n" #: sunrpc/rpc_main.c:297 #, c-format msgid "%s: unable to open %s: %m\n" msgstr "%s: 無法開啟 %s: %m\n" #: sunrpc/rpc_main.c:309 #, c-format msgid "%s: while writing output %s: %m" msgstr "%s: 當在寫出輸出 %s 時: %m" #: sunrpc/rpc_main.c:344 #, c-format msgid "cannot find C preprocessor: %s \n" msgstr "找不到 C 前置處理器: %s \n" #: sunrpc/rpc_main.c:352 msgid "cannot find any C preprocessor (cpp)\n" msgstr "找不到任何 C 前置處理器 (cpp)\n" #: sunrpc/rpc_main.c:421 #, c-format msgid "%s: C preprocessor failed with signal %d\n" msgstr "%s: C 前置處理器失效，其訊號值為 %d\n" #: sunrpc/rpc_main.c:424 #, c-format msgid "%s: C preprocessor failed with exit code %d\n" msgstr "%s: C 前置處理器失效，其結束碼為 %d\n" #: sunrpc/rpc_main.c:464 #, fuzzy, c-format msgid "illegal nettype: `%s'\n" msgstr "不合法的 nettype :`%s'\n" #: sunrpc/rpc_main.c:1130 #, c-format msgid "rpcgen: too many defines\n" msgstr "rpcgen: 太多 define 了\n" #: sunrpc/rpc_main.c:1142 #, c-format msgid "rpcgen: arglist coding error\n" msgstr "rpcgen: arglist 編碼錯誤\n" #. TRANS: the file will not be removed; this is an #. TRANS: informative message. #: sunrpc/rpc_main.c:1175 #, c-format msgid "file `%s' already exists and may be overwritten\n" msgstr "檔案 `%s' 已經存在並有可能會被覆蓋掉\n" #: sunrpc/rpc_main.c:1220 #, c-format msgid "Cannot specify more than one input file!\n" msgstr "無法指定超過一個輸入檔!\n" #: sunrpc/rpc_main.c:1394 #, c-format msgid "This implementation doesn't support newstyle or MT-safe code!\n" msgstr "此實作方式不支援新的形式或多安全執行序的程式!\n" #: sunrpc/rpc_main.c:1403 #, c-format msgid "Cannot use netid flag with inetd flag!\n" msgstr "無法將 netid 旗標與 inetd 旗標一起使用!\n" #: sunrpc/rpc_main.c:1415 #, c-format msgid "Cannot use netid flag without TIRPC!\n" msgstr "無法在沒有 TIRPC 時使用 netid 旗標!\n" #: sunrpc/rpc_main.c:1422 #, c-format msgid "Cannot use table flags with newstyle!\n" msgstr "無法將表格旗標與 newstyle 一起使用!\n" #: sunrpc/rpc_main.c:1441 #, c-format msgid "\"infile\" is required for template generation flags.\n" msgstr "\"infile\" 是樣版產生旗標所需的\n" #: sunrpc/rpc_main.c:1446 #, c-format msgid "Cannot have more than one file generation flag!\n" msgstr "無法使用超過一個的檔案產生旗標!\n" #: sunrpc/rpc_main.c:1455 #, c-format msgid "usage: %s infile\n" msgstr "用法: %s infile\n" #: sunrpc/rpc_main.c:1456 #, c-format msgid "\t%s [-abkCLNTM][-Dname[=value]] [-i size] [-I [-K seconds]] [-Y path] infile\n" msgstr "\t%s [-abkCLNTM][-D名稱[=值]] [-i 大小] [-I [-K 秒數]] [-Y 路徑] 輸入檔案\n" #: sunrpc/rpc_main.c:1458 #, c-format msgid "\t%s [-c | -h | -l | -m | -t | -Sc | -Ss | -Sm] [-o outfile] [infile]\n" msgstr "\t%s [-c | -h | -l | -m | -t | -Sc | -Ss | -Sm] [-o 輸出檔案] [輸入檔案]\n" #: sunrpc/rpc_main.c:1460 #, c-format msgid "\t%s [-s nettype]* [-o outfile] [infile]\n" msgstr "\t%s [-s 網路型態]* [-o 輸出檔案] [輸入檔案]\n" #: sunrpc/rpc_main.c:1461 #, c-format msgid "\t%s [-n netid]* [-o outfile] [infile]\n" msgstr "\t%s [-n 網路識別符號]* [-o 輸出檔案] [輸入檔案]\n" #: sunrpc/rpc_main.c:1469 #, c-format msgid "options:\n" msgstr "" #: sunrpc/rpc_main.c:1470 #, c-format msgid "-a\t\tgenerate all files, including samples\n" msgstr "" #: sunrpc/rpc_main.c:1471 #, c-format msgid "-b\t\tbackward compatibility mode (generates code for SunOS 4.1)\n" msgstr "" #: sunrpc/rpc_main.c:1472 #, c-format msgid "-c\t\tgenerate XDR routines\n" msgstr "" #: sunrpc/rpc_main.c:1473 #, c-format msgid "-C\t\tANSI C mode\n" msgstr "" #: sunrpc/rpc_main.c:1474 #, c-format msgid "-Dname[=value]\tdefine a symbol (same as #define)\n" msgstr "" #: sunrpc/rpc_main.c:1475 #, c-format msgid "-h\t\tgenerate header file\n" msgstr "" #: sunrpc/rpc_main.c:1476 #, c-format msgid "-i size\t\tsize at which to start generating inline code\n" msgstr "" #: sunrpc/rpc_main.c:1477 #, c-format msgid "-I\t\tgenerate code for inetd support in server (for SunOS 4.1)\n" msgstr "" #: sunrpc/rpc_main.c:1478 #, c-format msgid "-K seconds\tserver exits after K seconds of inactivity\n" msgstr "" #: sunrpc/rpc_main.c:1479 #, c-format msgid "-l\t\tgenerate client side stubs\n" msgstr "" #: sunrpc/rpc_main.c:1480 #, c-format msgid "-L\t\tserver errors will be printed to syslog\n" msgstr "" #: sunrpc/rpc_main.c:1481 #, c-format msgid "-m\t\tgenerate server side stubs\n" msgstr "" #: sunrpc/rpc_main.c:1482 #, c-format msgid "-M\t\tgenerate MT-safe code\n" msgstr "" #: sunrpc/rpc_main.c:1483 #, c-format msgid "-n netid\tgenerate server code that supports named netid\n" msgstr "" #: sunrpc/rpc_main.c:1484 #, c-format msgid "-N\t\tsupports multiple arguments and call-by-value\n" msgstr "" #: sunrpc/rpc_main.c:1485 #, fuzzy, c-format msgid "-o outfile\tname of the output file\n" msgstr "無法產生輸出檔" #: sunrpc/rpc_main.c:1486 #, c-format msgid "-s nettype\tgenerate server code that supports named nettype\n" msgstr "" #: sunrpc/rpc_main.c:1487 #, c-format msgid "-Sc\t\tgenerate sample client code that uses remote procedures\n" msgstr "" #: sunrpc/rpc_main.c:1488 #, c-format msgid "-Ss\t\tgenerate sample server code that defines remote procedures\n" msgstr "" #: sunrpc/rpc_main.c:1489 #, c-format msgid "-Sm \t\tgenerate makefile template \n" msgstr "" #: sunrpc/rpc_main.c:1490 #, c-format msgid "-t\t\tgenerate RPC dispatch table\n" msgstr "" #: sunrpc/rpc_main.c:1491 #, c-format msgid "-T\t\tgenerate code to support RPC dispatch tables\n" msgstr "" #: sunrpc/rpc_main.c:1492 #, fuzzy, c-format msgid "-Y path\t\tdirectory name to find C preprocessor (cpp)\n" msgstr "找不到任何 C 前置處理器 (cpp)\n" #: sunrpc/rpc_scan.c:114 msgid "constant or identifier expected" msgstr "應該要有常數或識別符號才對" #: sunrpc/rpc_scan.c:310 msgid "illegal character in file: " msgstr "檔案中有不合法的字元: " #: sunrpc/rpc_scan.c:349 sunrpc/rpc_scan.c:375 msgid "unterminated string constant" msgstr "沒有結尾的字串常數" #: sunrpc/rpc_scan.c:381 msgid "empty char string" msgstr "空的字元字串" #: sunrpc/rpc_scan.c:523 sunrpc/rpc_scan.c:533 msgid "preprocessor error" msgstr "前置處理器錯誤" #: sunrpc/rpcinfo.c:254 sunrpc/rpcinfo.c:400 #, c-format msgid "program %lu is not available\n" msgstr "程式 %lu 不存在\n" #: sunrpc/rpcinfo.c:281 sunrpc/rpcinfo.c:327 sunrpc/rpcinfo.c:350 #: sunrpc/rpcinfo.c:424 sunrpc/rpcinfo.c:470 sunrpc/rpcinfo.c:493 #: sunrpc/rpcinfo.c:527 #, c-format msgid "program %lu version %lu is not available\n" msgstr "程式 %lu 的第 %lu 版並不存在\n" #: sunrpc/rpcinfo.c:532 #, c-format msgid "program %lu version %lu ready and waiting\n" msgstr "程式 %lu 的第 %lu 版已經就緒並等待服務中\n" #: sunrpc/rpcinfo.c:573 sunrpc/rpcinfo.c:580 msgid "rpcinfo: can't contact portmapper" msgstr "rpcinfo: 無法建立跟 portmapper 之間的連線" #: sunrpc/rpcinfo.c:587 msgid "No remote programs registered.\n" msgstr "沒有註冊過的遠端應用程式\n" #: sunrpc/rpcinfo.c:591 msgid " program vers proto port\n" msgstr " 程式採用的協定連接阜\n" #: sunrpc/rpcinfo.c:630 msgid "(unknown)" msgstr "(未知)" #: sunrpc/rpcinfo.c:654 #, c-format msgid "rpcinfo: broadcast failed: %s\n" msgstr "rpcinfo: 廣播失敗: %s\n" #: sunrpc/rpcinfo.c:675 msgid "Sorry. You are not root\n" msgstr "不好意思，你並不是 root 使用者\n" #: sunrpc/rpcinfo.c:682 #, c-format msgid "rpcinfo: Could not delete registration for prog %s version %s\n" msgstr "rpcinfo: 無法刪除程式 %s (第 %s 版) 的註冊資料\n" #: sunrpc/rpcinfo.c:691 msgid "Usage: rpcinfo [ -n portnum ] -u host prognum [ versnum ]\n" msgstr "使用方式: rpcinfo [ -n portnum ] -u host prognum [ versnum ]\n" #: sunrpc/rpcinfo.c:693 msgid " rpcinfo [ -n portnum ] -t host prognum [ versnum ]\n" msgstr " rpcinfo [ -n portnum ] -t host prognum [ versnum ]\n" #: sunrpc/rpcinfo.c:695 msgid " rpcinfo -p [ host ]\n" msgstr " rpcinfo -p [ host ]\n" #: sunrpc/rpcinfo.c:696 msgid " rpcinfo -b prognum versnum\n" msgstr " rpcinfo -b prognum versnum\n" #: sunrpc/rpcinfo.c:697 msgid " rpcinfo -d prognum versnum\n" msgstr " rpcinfo -d prognum versnum\n" #: sunrpc/rpcinfo.c:722 #, c-format msgid "rpcinfo: %s is unknown service\n" msgstr "rpcinfo: %s 是不明的服務\n" #: sunrpc/rpcinfo.c:759 #, c-format msgid "rpcinfo: %s is unknown host\n" msgstr "rpcinfo: %s 是不明的主機\n" #: sunrpc/svc_run.c:70 #, fuzzy msgid "svc_run: - out of memory" msgstr "svctcp_create: 記憶體不足\n" #: sunrpc/svc_run.c:90 msgid "svc_run: - poll failed" msgstr "svc_run: - poll 失敗" #: sunrpc/svc_simple.c:87 #, c-format msgid "can't reassign procedure number %ld\n" msgstr "不能重複指定程序號碼 %ld\n" #: sunrpc/svc_simple.c:97 msgid "couldn't create an rpc server\n" msgstr "不能產生遠端程序呼叫伺服程式\n" #: sunrpc/svc_simple.c:105 #, c-format msgid "couldn't register prog %ld vers %ld\n" msgstr "不能將程式 %ld 註冊到 %ld\n" #: sunrpc/svc_simple.c:113 msgid "registerrpc: out of memory\n" msgstr "registerrpc: 記憶體不足\n" #: sunrpc/svc_simple.c:173 #, c-format msgid "trouble replying to prog %d\n" msgstr "回應程式 %d 時發生困難\n" #: sunrpc/svc_simple.c:182 #, c-format msgid "never registered prog %d\n" msgstr "千萬不要註冊程式 %d\n" #: sunrpc/svc_tcp.c:155 msgid "svc_tcp.c - tcp socket creation problem" msgstr "svc_tcp.c - tcp socket 建立發生問題" #: sunrpc/svc_tcp.c:170 msgid "svc_tcp.c - cannot getsockname or listen" msgstr "svc_tcp.c - 無法 getsockname 或 listen" #: sunrpc/svc_udp.c:128 msgid "svcudp_create: socket creation problem" msgstr "svcudp_create: socket 建立有問題" #: sunrpc/svc_udp.c:142 msgid "svcudp_create - cannot getsockname" msgstr "svcudp_create - 無法 getsockname" #: sunrpc/svc_udp.c:175 msgid "svcudp_create: xp_pad is too small for IP_PKTINFO\n" msgstr "svcudp_create: xp_pad 太小以致於無法 IP_PKTINFO\n" #: sunrpc/svc_udp.c:475 msgid "enablecache: cache already enabled" msgstr "enablecache: 快取已經開啟" #: sunrpc/svc_udp.c:481 msgid "enablecache: could not allocate cache" msgstr "enablecache: 無法配置快取" #: sunrpc/svc_udp.c:490 msgid "enablecache: could not allocate cache data" msgstr "enablecache: 無法配置快取資料" #: sunrpc/svc_udp.c:498 msgid "enablecache: could not allocate cache fifo" msgstr "enablecache: 無法配置快取 fifo 管線" #: sunrpc/svc_udp.c:533 msgid "cache_set: victim not found" msgstr "cache_set: 找不到 victim" #: sunrpc/svc_udp.c:544 msgid "cache_set: victim alloc failed" msgstr "cache_set: victim 配置失敗" #: sunrpc/svc_udp.c:551 msgid "cache_set: could not allocate new rpc_buffer" msgstr "cache_set: 無法配置新的遠端程序呼叫緩衝區 (rpc_buffer)" #: sunrpc/svc_unix.c:150 msgid "svc_unix.c - AF_UNIX socket creation problem" msgstr "svc_unix.c - AF_UNIX socket 建立有問題" #: sunrpc/svc_unix.c:166 msgid "svc_unix.c - cannot getsockname or listen" msgstr "svc_unix.c - 無法 getsockname 或 listen" #: sysdeps/generic/siglist.h:29 sysdeps/unix/siglist.c:27 msgid "Hangup" msgstr "掛斷" #: sysdeps/generic/siglist.h:30 sysdeps/unix/siglist.c:28 msgid "Interrupt" msgstr "中斷" #: sysdeps/generic/siglist.h:31 sysdeps/unix/siglist.c:29 msgid "Quit" msgstr "離開" #: sysdeps/generic/siglist.h:32 sysdeps/unix/siglist.c:30 msgid "Illegal instruction" msgstr "不合法的命令" #: sysdeps/generic/siglist.h:33 sysdeps/unix/siglist.c:31 msgid "Trace/breakpoint trap" msgstr "追蹤與中斷點陷阱" #: sysdeps/generic/siglist.h:34 msgid "Aborted" msgstr "已經終止" #: sysdeps/generic/siglist.h:35 sysdeps/unix/siglist.c:34 msgid "Floating point exception" msgstr "浮點數出錯" #: sysdeps/generic/siglist.h:36 sysdeps/unix/siglist.c:35 msgid "Killed" msgstr "已砍掉" #: sysdeps/generic/siglist.h:37 sysdeps/unix/siglist.c:36 msgid "Bus error" msgstr "匯流排錯誤 (Bus error)" #: sysdeps/generic/siglist.h:38 sysdeps/unix/siglist.c:37 msgid "Segmentation fault" msgstr "程式記憶體區段錯誤" #. TRANS Broken pipe; there is no process reading from the other end of a pipe. #. TRANS Every library function that returns this error code also generates a #. TRANS @code{SIGPIPE} signal; this signal terminates the program if not handled #. TRANS or blocked. Thus, your program will never actually see @code{EPIPE} #. TRANS unless it has handled or blocked @code{SIGPIPE}. #: sysdeps/generic/siglist.h:39 sysdeps/gnu/errlist.c:359 #: sysdeps/unix/siglist.c:39 msgid "Broken pipe" msgstr "中斷的 pipe" #: sysdeps/generic/siglist.h:40 sysdeps/unix/siglist.c:40 msgid "Alarm clock" msgstr "鬧鐘" #: sysdeps/generic/siglist.h:41 sysdeps/unix/siglist.c:41 msgid "Terminated" msgstr "終止" #: sysdeps/generic/siglist.h:42 sysdeps/unix/siglist.c:42 msgid "Urgent I/O condition" msgstr "緊急的輸出入狀態" #: sysdeps/generic/siglist.h:43 sysdeps/unix/siglist.c:43 msgid "Stopped (signal)" msgstr "停止 (信號)" #: sysdeps/generic/siglist.h:44 sysdeps/unix/siglist.c:44 msgid "Stopped" msgstr "停止" #: sysdeps/generic/siglist.h:45 sysdeps/unix/siglist.c:45 msgid "Continued" msgstr "繼續" #: sysdeps/generic/siglist.h:46 sysdeps/unix/siglist.c:46 msgid "Child exited" msgstr "子行程結束" #: sysdeps/generic/siglist.h:47 sysdeps/unix/siglist.c:47 msgid "Stopped (tty input)" msgstr "停止 (tty 輸入)" #: sysdeps/generic/siglist.h:48 sysdeps/unix/siglist.c:48 msgid "Stopped (tty output)" msgstr "停止 (tty 輸出)" #: sysdeps/generic/siglist.h:49 sysdeps/unix/siglist.c:49 msgid "I/O possible" msgstr "I/O 可行" #: sysdeps/generic/siglist.h:50 sysdeps/unix/siglist.c:50 msgid "CPU time limit exceeded" msgstr "CPU 時間上限超過了" #: sysdeps/generic/siglist.h:51 sysdeps/unix/siglist.c:51 msgid "File size limit exceeded" msgstr "檔案大小超過上限" #: sysdeps/generic/siglist.h:52 sysdeps/unix/siglist.c:52 msgid "Virtual timer expired" msgstr "虛擬計時器已過時取消了" #: sysdeps/generic/siglist.h:53 sysdeps/unix/siglist.c:53 msgid "Profiling timer expired" msgstr "測速評估用的計時器已過時取消了" #: sysdeps/generic/siglist.h:54 sysdeps/unix/siglist.c:54 msgid "Window changed" msgstr "範圍改變了" #: sysdeps/generic/siglist.h:55 sysdeps/unix/siglist.c:56 msgid "User defined signal 1" msgstr "使用者定義的訊號 1" #: sysdeps/generic/siglist.h:56 sysdeps/unix/siglist.c:57 msgid "User defined signal 2" msgstr "使用者定義的訊號 2" #: sysdeps/generic/siglist.h:60 sysdeps/unix/siglist.c:33 msgid "EMT trap" msgstr "EMT 陷阱" #: sysdeps/generic/siglist.h:63 sysdeps/unix/siglist.c:38 msgid "Bad system call" msgstr "錯誤的系統呼叫" #: sysdeps/generic/siglist.h:66 msgid "Stack fault" msgstr "堆疊錯誤" #: sysdeps/generic/siglist.h:69 msgid "Information request" msgstr "需要資料" #: sysdeps/generic/siglist.h:71 msgid "Power failure" msgstr "電源嚴重錯誤" #: sysdeps/generic/siglist.h:74 sysdeps/unix/siglist.c:55 msgid "Resource lost" msgstr "資源漏失" #. TRANS Operation not permitted; only the owner of the file (or other resource) #. TRANS or processes with special privileges can perform the operation. #: sysdeps/gnu/errlist.c:25 msgid "Operation not permitted" msgstr "此項操作並不被允許" #. TRANS No process matches the specified process ID. #: sysdeps/gnu/errlist.c:45 msgid "No such process" msgstr "沒有此一程序" #. TRANS Interrupted function call; an asynchronous signal occurred and prevented #. TRANS completion of the call. When this happens, you should try the call #. TRANS again. #. TRANS #. TRANS You can choose to have functions resume after a signal that is handled, #. TRANS rather than failing with @code{EINTR}; see @ref{Interrupted #. TRANS Primitives}. #: sysdeps/gnu/errlist.c:60 msgid "Interrupted system call" msgstr "中斷的系統呼叫" #. TRANS Input/output error; usually used for physical read or write errors. #: sysdeps/gnu/errlist.c:69 msgid "Input/output error" msgstr "輸入/輸出錯誤" #. TRANS No such device or address. The system tried to use the device #. TRANS represented by a file you specified, and it couldn't find the device. #. TRANS This can mean that the device file was installed incorrectly, or that #. TRANS the physical device is missing or not correctly attached to the #. TRANS computer. #: sysdeps/gnu/errlist.c:82 msgid "No such device or address" msgstr "沒有此一裝置或位址" #. TRANS Argument list too long; used when the arguments passed to a new program #. TRANS being executed with one of the @code{exec} functions (@pxref{Executing a #. TRANS File}) occupy too much memory space. This condition never arises in the #. TRANS GNU system. #: sysdeps/gnu/errlist.c:94 msgid "Argument list too long" msgstr "引數列項目過長" #. TRANS Invalid executable file format. This condition is detected by the #. TRANS @code{exec} functions; see @ref{Executing a File}. #: sysdeps/gnu/errlist.c:104 msgid "Exec format error" msgstr "可執行檔格式錯誤" #. TRANS Bad file descriptor; for example, I/O on a descriptor that has been #. TRANS closed or reading from a descriptor open only for writing (or vice #. TRANS versa). #: sysdeps/gnu/errlist.c:115 msgid "Bad file descriptor" msgstr "錯誤的檔案敘述項" #. TRANS There are no child processes. This error happens on operations that are #. TRANS supposed to manipulate child processes, when there aren't any processes #. TRANS to manipulate. #: sysdeps/gnu/errlist.c:126 msgid "No child processes" msgstr "沒有子程序存在" #. TRANS Deadlock avoided; allocating a system resource would have resulted in a #. TRANS deadlock situation. The system does not guarantee that it will notice #. TRANS all such situations. This error means you got lucky and the system #. TRANS noticed; it might just hang. @xref{File Locks}, for an example. #: sysdeps/gnu/errlist.c:138 msgid "Resource deadlock avoided" msgstr "避開資源鎖定" #. TRANS No memory available. The system cannot allocate more virtual memory #. TRANS because its capacity is full. #: sysdeps/gnu/errlist.c:148 msgid "Cannot allocate memory" msgstr "無法配置記憶體" #. TRANS Bad address; an invalid pointer was detected. #. TRANS In the GNU system, this error never happens; you get a signal instead. #: sysdeps/gnu/errlist.c:167 msgid "Bad address" msgstr "錯誤的位址" #. TRANS A file that isn't a block special file was given in a situation that #. TRANS requires one. For example, trying to mount an ordinary file as a file #. TRANS system in Unix gives this error. #: sysdeps/gnu/errlist.c:178 msgid "Block device required" msgstr "必須是區塊裝置 (Block device)" #. TRANS Resource busy; a system resource that can't be shared is already in use. #. TRANS For example, if you try to delete a file that is the root of a currently #. TRANS mounted filesystem, you get this error. #: sysdeps/gnu/errlist.c:189 msgid "Device or resource busy" msgstr "裝置或系統資源忙碌中" #. TRANS File exists; an existing file was specified in a context where it only #. TRANS makes sense to specify a new file. #: sysdeps/gnu/errlist.c:199 msgid "File exists" msgstr "檔案已存在" #. TRANS An attempt to make an improper link across file systems was detected. #. TRANS This happens not only when you use @code{link} (@pxref{Hard Links}) but #. TRANS also when you rename a file with @code{rename} (@pxref{Renaming Files}). #: sysdeps/gnu/errlist.c:210 msgid "Invalid cross-device link" msgstr "不適用的裝置間連結" #. TRANS The wrong type of device was given to a function that expects a #. TRANS particular sort of device. #: sysdeps/gnu/errlist.c:220 msgid "No such device" msgstr "沒有此一裝置" #. TRANS A file that isn't a directory was specified when a directory is required. #: sysdeps/gnu/errlist.c:229 msgid "Not a directory" msgstr "並不是一個目錄" #. TRANS File is a directory; you cannot open a directory for writing, #. TRANS or create or remove hard links to it. #: sysdeps/gnu/errlist.c:239 msgid "Is a directory" msgstr "是個目錄" #. TRANS Invalid argument. This is used to indicate various kinds of problems #. TRANS with passing the wrong argument to a library function. #: sysdeps/gnu/errlist.c:249 msgid "Invalid argument" msgstr "不適用的引數" #. TRANS The current process has too many files open and can't open any more. #. TRANS Duplicate descriptors do count toward this limit. #. TRANS #. TRANS In BSD and GNU, the number of open files is controlled by a resource #. TRANS limit that can usually be increased. If you get this error, you might #. TRANS want to increase the @code{RLIMIT_NOFILE} limit or make it unlimited; #. TRANS @pxref{Limits on Resources}. #: sysdeps/gnu/errlist.c:264 msgid "Too many open files" msgstr "開啟太多檔案" #. TRANS There are too many distinct file openings in the entire system. Note #. TRANS that any number of linked channels count as just one file opening; see #. TRANS @ref{Linked Channels}. This error never occurs in the GNU system. #: sysdeps/gnu/errlist.c:275 msgid "Too many open files in system" msgstr "系統中太多的開啟檔案" #. TRANS Inappropriate I/O control operation, such as trying to set terminal #. TRANS modes on an ordinary file. #: sysdeps/gnu/errlist.c:285 msgid "Inappropriate ioctl for device" msgstr "不希望的裝置輸出入控制 (ioctl)" #. TRANS An attempt to execute a file that is currently open for writing, or #. TRANS write to a file that is currently being executed. Often using a #. TRANS debugger to run a program is considered having it open for writing and #. TRANS will cause this error. (The name stands for ``text file busy''.) This #. TRANS is not an error in the GNU system; the text is copied as necessary. #: sysdeps/gnu/errlist.c:298 msgid "Text file busy" msgstr "文字檔忙錄中" #. TRANS File too big; the size of a file would be larger than allowed by the system. #: sysdeps/gnu/errlist.c:307 msgid "File too large" msgstr "檔案太大" #. TRANS No space left on device; write operation on a file failed because the #. TRANS disk is full. #: sysdeps/gnu/errlist.c:317 msgid "No space left on device" msgstr "裝置上已無多餘空間" #. TRANS Invalid seek operation (such as on a pipe). #: sysdeps/gnu/errlist.c:326 msgid "Illegal seek" msgstr "不合法的搜尋" #. TRANS An attempt was made to modify something on a read-only file system. #: sysdeps/gnu/errlist.c:335 msgid "Read-only file system" msgstr "唯讀的檔案系統" #. TRANS Too many links; the link count of a single file would become too large. #. TRANS @code{rename} can cause this error if the file being renamed already has #. TRANS as many links as it can take (@pxref{Renaming Files}). #: sysdeps/gnu/errlist.c:346 msgid "Too many links" msgstr "太多連結" #. TRANS Domain error; used by mathematical functions when an argument value does #. TRANS not fall into the domain over which the function is defined. #: sysdeps/gnu/errlist.c:369 msgid "Numerical argument out of domain" msgstr "數值參數的值超出範圍" #. TRANS Range error; used by mathematical functions when the result value is #. TRANS not representable because of overflow or underflow. #: sysdeps/gnu/errlist.c:379 msgid "Numerical result out of range" msgstr "數值運算結果超出範圍" #. TRANS Resource temporarily unavailable; the call might work if you try again #. TRANS later. The macro @code{EWOULDBLOCK} is another name for @code{EAGAIN}; #. TRANS they are always the same in the GNU C library. #. TRANS #. TRANS This error can happen in a few different situations: #. TRANS #. TRANS @itemize @bullet #. TRANS @item #. TRANS An operation that would block was attempted on an object that has #. TRANS non-blocking mode selected. Trying the same operation again will block #. TRANS until some external condition makes it possible to read, write, or #. TRANS connect (whatever the operation). You can use @code{select} to find out #. TRANS when the operation will be possible; @pxref{Waiting for I/O}. #. TRANS #. TRANS @strong{Portability Note:} In many older Unix systems, this condition #. TRANS was indicated by @code{EWOULDBLOCK}, which was a distinct error code #. TRANS different from @code{EAGAIN}. To make your program portable, you should #. TRANS check for both codes and treat them the same. #. TRANS #. TRANS @item #. TRANS A temporary resource shortage made an operation impossible. @code{fork} #. TRANS can return this error. It indicates that the shortage is expected to #. TRANS pass, so your program can try the call again later and it may succeed. #. TRANS It is probably a good idea to delay for a few seconds before trying it #. TRANS again, to allow time for other processes to release scarce resources. #. TRANS Such shortages are usually fairly serious and affect the whole system, #. TRANS so usually an interactive program should report the error to the user #. TRANS and return to its command loop. #. TRANS @end itemize #: sysdeps/gnu/errlist.c:416 msgid "Resource temporarily unavailable" msgstr "資源暫時無法取得" #. TRANS In the GNU C library, this is another name for @code{EAGAIN} (above). #. TRANS The values are always the same, on every operating system. #. TRANS #. TRANS C libraries in many older Unix systems have @code{EWOULDBLOCK} as a #. TRANS separate error code. #: sysdeps/gnu/errlist.c:429 msgid "Operation would block" msgstr "操作將會暫停" #. TRANS An operation that cannot complete immediately was initiated on an object #. TRANS that has non-blocking mode selected. Some functions that must always #. TRANS block (such as @code{connect}; @pxref{Connecting}) never return #. TRANS @code{EAGAIN}. Instead, they return @code{EINPROGRESS} to indicate that #. TRANS the operation has begun and will take some time. Attempts to manipulate #. TRANS the object before the call completes return @code{EALREADY}. You can #. TRANS use the @code{select} function to find out when the pending operation #. TRANS has completed; @pxref{Waiting for I/O}. #: sysdeps/gnu/errlist.c:445 msgid "Operation now in progress" msgstr "操作正在處理中" #. TRANS An operation is already in progress on an object that has non-blocking #. TRANS mode selected. #: sysdeps/gnu/errlist.c:455 msgid "Operation already in progress" msgstr "此項操作已經在處理當中" #. TRANS A file that isn't a socket was specified when a socket is required. #: sysdeps/gnu/errlist.c:464 msgid "Socket operation on non-socket" msgstr "Socket 在非 socket 上運作" #. TRANS The size of a message sent on a socket was larger than the supported #. TRANS maximum size. #: sysdeps/gnu/errlist.c:474 msgid "Message too long" msgstr "訊息太長" #. TRANS The socket type does not support the requested communications protocol. #: sysdeps/gnu/errlist.c:483 msgid "Protocol wrong type for socket" msgstr "socket 的協定錯誤型態" #. TRANS You specified a socket option that doesn't make sense for the #. TRANS particular protocol being used by the socket. @xref{Socket Options}. #: sysdeps/gnu/errlist.c:493 msgid "Protocol not available" msgstr "協定不存在" #. TRANS The socket domain does not support the requested communications protocol #. TRANS (perhaps because the requested protocol is completely invalid). #. TRANS @xref{Creating a Socket}. #: sysdeps/gnu/errlist.c:504 msgid "Protocol not supported" msgstr "協定不支援" #. TRANS The socket type is not supported. #: sysdeps/gnu/errlist.c:513 msgid "Socket type not supported" msgstr "Socket 型別不支援" #. TRANS The operation you requested is not supported. Some socket functions #. TRANS don't make sense for all types of sockets, and others may not be #. TRANS implemented for all communications protocols. In the GNU system, this #. TRANS error can happen for many calls when the object does not support the #. TRANS particular operation; it is a generic indication that the server knows #. TRANS nothing to do for that call. #: sysdeps/gnu/errlist.c:527 msgid "Operation not supported" msgstr "此項操作並不被支援" #. TRANS The socket communications protocol family you requested is not supported. #: sysdeps/gnu/errlist.c:536 msgid "Protocol family not supported" msgstr "協定群組不支援" #. TRANS The address family specified for a socket is not supported; it is #. TRANS inconsistent with the protocol being used on the socket. @xref{Sockets}. #: sysdeps/gnu/errlist.c:546 msgid "Address family not supported by protocol" msgstr "位址族群不被協定所支援" #. TRANS The requested socket address is already in use. @xref{Socket Addresses}. #: sysdeps/gnu/errlist.c:555 msgid "Address already in use" msgstr "位址已經有在使用" #. TRANS The requested socket address is not available; for example, you tried #. TRANS to give a socket a name that doesn't match the local host name. #. TRANS @xref{Socket Addresses}. #: sysdeps/gnu/errlist.c:566 msgid "Cannot assign requested address" msgstr "無法指定所需的位址" #. TRANS A socket operation failed because the network was down. #: sysdeps/gnu/errlist.c:575 msgid "Network is down" msgstr "網路停擺" #. TRANS A socket operation failed because the subnet containing the remote host #. TRANS was unreachable. #: sysdeps/gnu/errlist.c:585 msgid "Network is unreachable" msgstr "無法接觸網路" #. TRANS A network connection was reset because the remote host crashed. #: sysdeps/gnu/errlist.c:594 msgid "Network dropped connection on reset" msgstr "在重設時網路連線漏失" #. TRANS A network connection was aborted locally. #: sysdeps/gnu/errlist.c:603 msgid "Software caused connection abort" msgstr "軟體造成連線中斷" #. TRANS A network connection was closed for reasons outside the control of the #. TRANS local host, such as by the remote machine rebooting or an unrecoverable #. TRANS protocol violation. #: sysdeps/gnu/errlist.c:614 msgid "Connection reset by peer" msgstr "連線被對方重設" #. TRANS The kernel's buffers for I/O operations are all in use. In GNU, this #. TRANS error is always synonymous with @code{ENOMEM}; you may get one or the #. TRANS other from network operations. #: sysdeps/gnu/errlist.c:625 msgid "No buffer space available" msgstr "沒有可用的緩衝空間了" #. TRANS You tried to connect a socket that is already connected. #. TRANS @xref{Connecting}. #: sysdeps/gnu/errlist.c:635 msgid "Transport endpoint is already connected" msgstr "傳輸的兩端已經完成連線了" #. TRANS The socket is not connected to anything. You get this error when you #. TRANS try to transmit data over a socket, without first specifying a #. TRANS destination for the data. For a connectionless socket (for datagram #. TRANS protocols, such as UDP), you get @code{EDESTADDRREQ} instead. #: sysdeps/gnu/errlist.c:647 msgid "Transport endpoint is not connected" msgstr "傳輸的兩端尚未連線" #. TRANS No default destination address was set for the socket. You get this #. TRANS error when you try to transmit data over a connectionless socket, #. TRANS without first specifying a destination for the data with @code{connect}. #: sysdeps/gnu/errlist.c:658 msgid "Destination address required" msgstr "需要目標位址" #. TRANS The socket has already been shut down. #: sysdeps/gnu/errlist.c:667 msgid "Cannot send after transport endpoint shutdown" msgstr "無法在輸送端點關閉後傳送" #. TRANS ??? #: sysdeps/gnu/errlist.c:676 msgid "Too many references: cannot splice" msgstr "太多的參考指標: 無法連接" #. TRANS A socket operation with a specified timeout received no response during #. TRANS the timeout period. #: sysdeps/gnu/errlist.c:686 msgid "Connection timed out" msgstr "連線超過時間" #. TRANS A remote host refused to allow the network connection (typically because #. TRANS it is not running the requested service). #: sysdeps/gnu/errlist.c:696 msgid "Connection refused" msgstr "連線被拒絕" #. TRANS Too many levels of symbolic links were encountered in looking up a file name. #. TRANS This often indicates a cycle of symbolic links. #: sysdeps/gnu/errlist.c:706 msgid "Too many levels of symbolic links" msgstr "太多層級的符號連結檔" #. TRANS Filename too long (longer than @code{PATH_MAX}; @pxref{Limits for #. TRANS Files}) or host name too long (in @code{gethostname} or #. TRANS @code{sethostname}; @pxref{Host Identification}). #: sysdeps/gnu/errlist.c:717 msgid "File name too long" msgstr "檔名太長" #. TRANS The remote host for a requested network connection is down. #: sysdeps/gnu/errlist.c:726 msgid "Host is down" msgstr "遠端系統已停機了" #. TRANS The remote host for a requested network connection is not reachable. #: sysdeps/gnu/errlist.c:735 msgid "No route to host" msgstr "找不到通往該主機的路由路徑" #. TRANS Directory not empty, where an empty directory was expected. Typically, #. TRANS this error occurs when you are trying to delete a directory. #: sysdeps/gnu/errlist.c:745 msgid "Directory not empty" msgstr "目錄不是空的" #. TRANS This means that the per-user limit on new process would be exceeded by #. TRANS an attempted @code{fork}. @xref{Limits on Resources}, for details on #. TRANS the @code{RLIMIT_NPROC} limit. #: sysdeps/gnu/errlist.c:756 msgid "Too many processes" msgstr "太多的行程" #. TRANS The file quota system is confused because there are too many users. #. TRANS @c This can probably happen in a GNU system when using NFS. #: sysdeps/gnu/errlist.c:766 msgid "Too many users" msgstr "太多使用者" #. TRANS The user's disk quota was exceeded. #: sysdeps/gnu/errlist.c:775 msgid "Disk quota exceeded" msgstr "硬碟 quota 滿了" #. TRANS Stale NFS file handle. This indicates an internal confusion in the NFS #. TRANS system which is due to file system rearrangements on the server host. #. TRANS Repairing this condition usually requires unmounting and remounting #. TRANS the NFS file system on the local host. #: sysdeps/gnu/errlist.c:787 msgid "Stale NFS file handle" msgstr "過舊的 NFS 檔案控制碼" #. TRANS An attempt was made to NFS-mount a remote file system with a file name that #. TRANS already specifies an NFS-mounted file. #. TRANS (This is an error on some operating systems, but we expect it to work #. TRANS properly on the GNU system, making this error code impossible.) #: sysdeps/gnu/errlist.c:799 msgid "Object is remote" msgstr "目標檔案位於遠端" #. TRANS ??? #: sysdeps/gnu/errlist.c:808 msgid "RPC struct is bad" msgstr "RPC 結構是壞的" #. TRANS ??? #: sysdeps/gnu/errlist.c:817 msgid "RPC version wrong" msgstr "RPC 版本錯誤" #. TRANS ??? #: sysdeps/gnu/errlist.c:826 msgid "RPC program not available" msgstr "RPC 程式不存在" #. TRANS ??? #: sysdeps/gnu/errlist.c:835 msgid "RPC program version wrong" msgstr "RPC 程式版本錯誤" #. TRANS ??? #: sysdeps/gnu/errlist.c:844 msgid "RPC bad procedure for program" msgstr "程式的 RPC 程序錯誤" #. TRANS No locks available. This is used by the file locking facilities; see #. TRANS @ref{File Locks}. This error is never generated by the GNU system, but #. TRANS it can result from an operation to an NFS server running another #. TRANS operating system. #: sysdeps/gnu/errlist.c:856 msgid "No locks available" msgstr "無法鎖定資料" #. TRANS Inappropriate file type or format. The file was the wrong type for the #. TRANS operation, or a data file had the wrong format. #. TRANS #. TRANS On some systems @code{chmod} returns this error if you try to set the #. TRANS sticky bit on a non-directory file; @pxref{Setting Permissions}. #: sysdeps/gnu/errlist.c:869 msgid "Inappropriate file type or format" msgstr "不希望的檔案形態或格式" #. TRANS ??? #: sysdeps/gnu/errlist.c:878 msgid "Authentication error" msgstr "鑑定錯誤" #. TRANS ??? #: sysdeps/gnu/errlist.c:887 msgid "Need authenticator" msgstr "需要認證" #. TRANS Function not implemented. This indicates that the function called is #. TRANS not implemented at all, either in the C library itself or in the #. TRANS operating system. When you get this error, you can be sure that this #. TRANS particular function will always fail with @code{ENOSYS} unless you #. TRANS install a new version of the C library or the operating system. #: sysdeps/gnu/errlist.c:900 msgid "Function not implemented" msgstr "功能沒有實作" #. TRANS Not supported. A function returns this error when certain parameter #. TRANS values are valid, but the functionality they request is not available. #. TRANS This can mean that the function does not implement a particular command #. TRANS or option value or flag bit at all. For functions that operate on some #. TRANS object given in a parameter, such as a file descriptor or a port, it #. TRANS might instead mean that only @emph{that specific object} (file #. TRANS descriptor, port, etc.) is unable to support the other parameters given; #. TRANS different file descriptors might support different ranges of parameter #. TRANS values. #. TRANS #. TRANS If the entire function is not available at all in the implementation, #. TRANS it returns @code{ENOSYS} instead. #: sysdeps/gnu/errlist.c:920 msgid "Not supported" msgstr "並未支援" #. TRANS While decoding a multibyte character the function came along an invalid #. TRANS or an incomplete sequence of bytes or the given wide character is invalid. #: sysdeps/gnu/errlist.c:930 msgid "Invalid or incomplete multibyte or wide character" msgstr "不適用或不完整的多位元組字元或寬字元" #. TRANS In the GNU system, servers supporting the @code{term} protocol return #. TRANS this error for certain operations when the caller is not in the #. TRANS foreground process group of the terminal. Users do not usually see this #. TRANS error because functions such as @code{read} and @code{write} translate #. TRANS it into a @code{SIGTTIN} or @code{SIGTTOU} signal. @xref{Job Control}, #. TRANS for information on process groups and these signals. #: sysdeps/gnu/errlist.c:944 msgid "Inappropriate operation for background process" msgstr "不希望的背景行程運作" #. TRANS In the GNU system, opening a file returns this error when the file is #. TRANS translated by a program and the translator program dies while starting #. TRANS up, before it has connected to the file. #: sysdeps/gnu/errlist.c:955 msgid "Translator died" msgstr "中介程式已經結束" #. TRANS The experienced user will know what is wrong. #. TRANS @c This error code is a joke. Its perror text is part of the joke. #. TRANS @c Don't change it. #: sysdeps/gnu/errlist.c:966 msgid "?" msgstr "?" #. TRANS You did @strong{what}? #: sysdeps/gnu/errlist.c:975 msgid "You really blew it this time" msgstr "這次真的被您打敗了" # This is error EIEIO, errno 104 # # - Macro: int EIEIO # Go home and have a glass of warm, dairy-fresh milk. # # The following messages were copied & pasted # from es.po by Santiago Vila Doncel . # # # 穌u diablos es esto?, esperemos a tener las fuentes # estupendo, este error parece mostrarse en dos ocasiones # - Macro: int EIEIO # Go home and have a glass of warm, dairy-fresh milk. # Jochen tambien lo traduce as. em # # Okay. Since you are dying to know, I'll tell you. # This is a joke, obviously. There is a children's song which begins, # "Old McDonald had a farm, e-i-e-i-o." Every time I see the (real) # errno macro EIO, I think about that song. Probably most of my # compatriots who program on Unix do, too. One of them must have stayed # up a little too late one night and decided to add it to Hurd or Glibc. # Whoever did it should be castigated, but it made me laugh. # --jtobey@channel1.com # # "bought the farm" means "died". -jtobey # # Bueno, pues despu廥 de pensarlo mucho, he seguido el ejemplo de la # traducci鏮 francesa (traducci鏮 libre). sv # # # 簡單的說，兒歌 "唐老先生有塊地..."，然後呢?? ;-p # #. TRANS Go home and have a glass of warm, dairy-fresh milk. #: sysdeps/gnu/errlist.c:984 msgid "Computer bought the farm" msgstr "這台電腦買了一塊地囉" #. TRANS This error code has no purpose. #: sysdeps/gnu/errlist.c:993 msgid "Gratuitous error" msgstr "無故的錯誤" #: sysdeps/gnu/errlist.c:1001 msgid "Bad message" msgstr "錯誤的訊息" #: sysdeps/gnu/errlist.c:1009 msgid "Identifier removed" msgstr "識別符號移除" #: sysdeps/gnu/errlist.c:1017 msgid "Multihop attempted" msgstr "嘗試 Multihop" #: sysdeps/gnu/errlist.c:1025 msgid "No data available" msgstr "沒有可用的資料" #: sysdeps/gnu/errlist.c:1033 msgid "Link has been severed" msgstr "連結已有服務" #: sysdeps/gnu/errlist.c:1041 msgid "No message of desired type" msgstr "沒有符合需求格式的訊息" #: sysdeps/gnu/errlist.c:1049 msgid "Out of streams resources" msgstr "所有資料流的資源都已用盡" #: sysdeps/gnu/errlist.c:1057 msgid "Device not a stream" msgstr "裝置不是資料流" #: sysdeps/gnu/errlist.c:1065 msgid "Value too large for defined data type" msgstr "有定義的資料型別值太大" #: sysdeps/gnu/errlist.c:1073 msgid "Protocol error" msgstr "協定錯誤" #: sysdeps/gnu/errlist.c:1081 msgid "Timer expired" msgstr "計時器已過時取消了" #. TRANS Operation canceled; an asynchronous operation was canceled before it #. TRANS completed. @xref{Asynchronous I/O}. When you call @code{aio_cancel}, #. TRANS the normal result is for the operations affected to complete with this #. TRANS error; @pxref{Cancel AIO Operations}. #: sysdeps/gnu/errlist.c:1093 msgid "Operation canceled" msgstr "操作已被取消" #: sysdeps/gnu/errlist.c:1101 msgid "Interrupted system call should be restarted" msgstr "中斷的系統呼叫必須重新啟動" #: sysdeps/gnu/errlist.c:1109 msgid "Channel number out of range" msgstr "通道號碼超出範圍" #: sysdeps/gnu/errlist.c:1117 msgid "Level 2 not synchronized" msgstr "層級 2 沒有同步" #: sysdeps/gnu/errlist.c:1125 msgid "Level 3 halted" msgstr "層級 3 停止" #: sysdeps/gnu/errlist.c:1133 msgid "Level 3 reset" msgstr "層級 3 重設" #: sysdeps/gnu/errlist.c:1141 msgid "Link number out of range" msgstr "連結數目超過範圍" #: sysdeps/gnu/errlist.c:1149 msgid "Protocol driver not attached" msgstr "協定的驅動程式未連接" #: sysdeps/gnu/errlist.c:1157 msgid "No CSI structure available" msgstr "沒有可用的 CSI 結構了" #: sysdeps/gnu/errlist.c:1165 msgid "Level 2 halted" msgstr "層級 2 停止" #: sysdeps/gnu/errlist.c:1173 msgid "Invalid exchange" msgstr "不適用的交換" #: sysdeps/gnu/errlist.c:1181 msgid "Invalid request descriptor" msgstr "不適用的請求敘述項" #: sysdeps/gnu/errlist.c:1189 msgid "Exchange full" msgstr "交換已充足" #: sysdeps/gnu/errlist.c:1197 msgid "No anode" msgstr "沒有陽極" #: sysdeps/gnu/errlist.c:1205 msgid "Invalid request code" msgstr "不適用的請求碼" #: sysdeps/gnu/errlist.c:1213 msgid "Invalid slot" msgstr "不適用的 slot" #: sysdeps/gnu/errlist.c:1221 msgid "File locking deadlock error" msgstr "檔案鎖定停頓錯誤" #: sysdeps/gnu/errlist.c:1229 msgid "Bad font file format" msgstr "錯誤的字型檔格式" #: sysdeps/gnu/errlist.c:1237 msgid "Machine is not on the network" msgstr "機器不在網路中" #: sysdeps/gnu/errlist.c:1245 msgid "Package not installed" msgstr "套件並未安裝" #: sysdeps/gnu/errlist.c:1253 msgid "Advertise error" msgstr "通知錯誤" #: sysdeps/gnu/errlist.c:1261 msgid "Srmount error" msgstr "Srmount 錯誤" #: sysdeps/gnu/errlist.c:1269 msgid "Communication error on send" msgstr "在傳送時通訊錯誤" #: sysdeps/gnu/errlist.c:1277 msgid "RFS specific error" msgstr "RFS 特定錯誤" #: sysdeps/gnu/errlist.c:1285 msgid "Name not unique on network" msgstr "網路上的名稱不是唯一的" #: sysdeps/gnu/errlist.c:1293 msgid "File descriptor in bad state" msgstr "檔案敘述項處於錯誤狀態" #: sysdeps/gnu/errlist.c:1301 msgid "Remote address changed" msgstr "遠端位址改變了" #: sysdeps/gnu/errlist.c:1309 msgid "Can not access a needed shared library" msgstr "無法存取所需的分享函式庫" #: sysdeps/gnu/errlist.c:1317 msgid "Accessing a corrupted shared library" msgstr "存取一個毀掉的分享函式庫" #: sysdeps/gnu/errlist.c:1325 msgid ".lib section in a.out corrupted" msgstr "a.out 中 .lib 節區毀掉了" #: sysdeps/gnu/errlist.c:1333 msgid "Attempting to link in too many shared libraries" msgstr "嘗試去連結太多的分享資料庫" #: sysdeps/gnu/errlist.c:1341 msgid "Cannot exec a shared library directly" msgstr "不能直接執行一個分享函式庫" #: sysdeps/gnu/errlist.c:1349 msgid "Streams pipe error" msgstr "資料流管線錯誤" #: sysdeps/gnu/errlist.c:1357 msgid "Structure needs cleaning" msgstr "結構需要清理" #: sysdeps/gnu/errlist.c:1365 msgid "Not a XENIX named type file" msgstr "並非 XENIX 命名格式的檔案" #: sysdeps/gnu/errlist.c:1373 msgid "No XENIX semaphores available" msgstr "沒有可用的 XENIX 信號標誌了" #: sysdeps/gnu/errlist.c:1381 msgid "Is a named type file" msgstr "是個有名字形態的檔案" #: sysdeps/gnu/errlist.c:1389 msgid "Remote I/O error" msgstr "遠端輸出入錯誤" #: sysdeps/gnu/errlist.c:1397 msgid "No medium found" msgstr "找不到媒體" #: sysdeps/gnu/errlist.c:1405 msgid "Wrong medium type" msgstr "錯誤的媒介形態" #: sysdeps/gnu/errlist.c:1413 #, fuzzy msgid "Required key not available" msgstr "資源暫時無法取得" #: sysdeps/gnu/errlist.c:1421 #, fuzzy msgid "Key has expired" msgstr "計時器已過時取消了" #: sysdeps/gnu/errlist.c:1429 #, fuzzy msgid "Key has been revoked" msgstr "連結已有服務" #: sysdeps/gnu/errlist.c:1437 msgid "Key was rejected by service" msgstr "" #: sysdeps/gnu/errlist.c:1445 msgid "Owner died" msgstr "" #: sysdeps/gnu/errlist.c:1453 msgid "State not recoverable" msgstr "" #: sysdeps/mach/_strerror.c:57 msgid "Error in unknown error system: " msgstr "未知問題系統錯誤: " #: sysdeps/posix/gai_strerror-strs.h:1 msgid "Address family for hostname not supported" msgstr "hostname 的位址族群不支援" #: sysdeps/posix/gai_strerror-strs.h:2 msgid "Temporary failure in name resolution" msgstr "解析名稱時發生暫時性的錯誤" #: sysdeps/posix/gai_strerror-strs.h:3 msgid "Bad value for ai_flags" msgstr "錯誤的 ai_flags 值" #: sysdeps/posix/gai_strerror-strs.h:4 msgid "Non-recoverable failure in name resolution" msgstr "在解析名稱時發生嚴重的錯誤" #: sysdeps/posix/gai_strerror-strs.h:5 msgid "ai_family not supported" msgstr "ai_family 沒有支援" #: sysdeps/posix/gai_strerror-strs.h:6 msgid "Memory allocation failure" msgstr "記憶體配置失敗" #: sysdeps/posix/gai_strerror-strs.h:7 msgid "No address associated with hostname" msgstr "沒有此主機名稱所對應的位址" #: sysdeps/posix/gai_strerror-strs.h:8 msgid "Name or service not known" msgstr "未知的名稱或服務" #: sysdeps/posix/gai_strerror-strs.h:9 msgid "Servname not supported for ai_socktype" msgstr "不支援 ai_socktype 的伺服名稱" #: sysdeps/posix/gai_strerror-strs.h:10 msgid "ai_socktype not supported" msgstr "ai_socktype 沒有支援" #: sysdeps/posix/gai_strerror-strs.h:11 msgid "System error" msgstr "系統錯誤" #: sysdeps/posix/gai_strerror-strs.h:12 msgid "Processing request in progress" msgstr "此項請求已經在處理當中" #: sysdeps/posix/gai_strerror-strs.h:13 msgid "Request canceled" msgstr "請求已被取消" #: sysdeps/posix/gai_strerror-strs.h:14 msgid "Request not canceled" msgstr "請求並未取消" #: sysdeps/posix/gai_strerror-strs.h:15 msgid "All requests done" msgstr "所有請求已完成" #: sysdeps/posix/gai_strerror-strs.h:16 msgid "Interrupted by a signal" msgstr "由訊號所中斷" #: sysdeps/posix/gai_strerror-strs.h:17 msgid "Parameter string not correctly encoded" msgstr "" #: sysdeps/unix/siglist.c:26 msgid "Signal 0" msgstr "訊號 0" #: sysdeps/unix/siglist.c:32 msgid "IOT trap" msgstr "IOT 陷阱" #: sysdeps/unix/sysv/linux/i386/readelflib.c:49 #, c-format msgid "%s is for unknown machine %d.\n" msgstr "%s 是給未知的機器 %d。\n" #: sysdeps/unix/sysv/linux/ia64/makecontext.c:63 #, c-format msgid "makecontext: does not know how to handle more than 8 arguments\n" msgstr "makecontext: 不知要如何處理超過八個引數\n" #: sysdeps/unix/sysv/linux/lddlibc4.c:61 #, c-format msgid "" "Usage: lddlibc4 FILE\n" "\n" msgstr "" #: sysdeps/unix/sysv/linux/lddlibc4.c:82 #, c-format msgid "cannot open `%s'" msgstr "無法開啟 `%s'" #: sysdeps/unix/sysv/linux/lddlibc4.c:86 #, c-format msgid "cannot read header from `%s'" msgstr "無法從 `%s' 讀取標頭資料" #: timezone/zdump.c:210 msgid "lacks alphabetic at start" msgstr "" #: timezone/zdump.c:212 msgid "has fewer than 3 alphabetics" msgstr "" #: timezone/zdump.c:214 msgid "has more than 6 alphabetics" msgstr "" #: timezone/zdump.c:222 msgid "differs from POSIX standard" msgstr "" #: timezone/zdump.c:228 #, c-format msgid "%s: warning: zone \"%s\" abbreviation \"%s\" %s\n" msgstr "" #: timezone/zdump.c:279 #, fuzzy, c-format msgid "%s: usage is %s [ --version ] [ -v ] [ -c [loyear,]hiyear ] zonename ...\n" msgstr "%s: 用法是 %s [ --version ] [ -v ] [ -c 切斷 ] 地區名稱 ...\n" #: timezone/zdump.c:296 #, fuzzy, c-format msgid "%s: wild -c argument %s\n" msgstr "%s: 太多的引數\n" #: timezone/zdump.c:387 #, fuzzy msgid "Error writing to standard output" msgstr "寫入標準輸出時錯誤" #: timezone/zdump.c:410 #, c-format msgid "%s: use of -v on system with floating time_t other than float or double\n" msgstr "" #: timezone/zic.c:388 #, c-format msgid "%s: Memory exhausted: %s\n" msgstr "%s: 記憶體已用完: %s\n" #: timezone/zic.c:434 #, c-format msgid "\"%s\", line %d: %s" msgstr "\"%s\", 第 %d 行: %s" #: timezone/zic.c:437 #, c-format msgid " (rule from \"%s\", line %d)" msgstr " (規則來自 \"%s\", 第 %d 行)" #: timezone/zic.c:449 msgid "warning: " msgstr "警告: " #: timezone/zic.c:459 #, fuzzy, c-format msgid "" "%s: usage is %s [ --version ] [ -v ] [ -l localtime ] [ -p posixrules ] \\\n" "\t[ -d directory ] [ -L leapseconds ] [ -y yearistype ] [ filename ... ]\n" msgstr "" "%s: 用法是 %s [ --version ] [ -s ] [ -v ] [ -l 當地時間 ] [ -p posix規則 ] \\\n" "\t[ -d 目錄 ] [ -L 閏秒 ] [ -y 年份型態 ] [ 檔案名稱 ... ]\n" #: timezone/zic.c:494 msgid "wild compilation-time specification of zic_t" msgstr "" #: timezone/zic.c:511 #, c-format msgid "%s: More than one -d option specified\n" msgstr "%s: 您使用了超過一個 -d 選項\n" #: timezone/zic.c:521 #, c-format msgid "%s: More than one -l option specified\n" msgstr "%s: 您使用了超過一個 -l 選項\n" #: timezone/zic.c:531 #, c-format msgid "%s: More than one -p option specified\n" msgstr "%s: 您使用了超過一個 -p 選項\n" #: timezone/zic.c:541 #, c-format msgid "%s: More than one -y option specified\n" msgstr "%s: 您使用了超過一個 -y 選項\n" #: timezone/zic.c:551 #, c-format msgid "%s: More than one -L option specified\n" msgstr "%s: 您使用了超過一個 -L 選項\n" #: timezone/zic.c:600 #, fuzzy msgid "link to link" msgstr "行的長度過長" #: timezone/zic.c:665 msgid "hard link failed, symbolic link used" msgstr "實體連結失敗，使用符號連結代替" #: timezone/zic.c:673 #, c-format msgid "%s: Can't link from %s to %s: %s\n" msgstr "%s: 無法從 %s 連結到 %s: %s\n" #: timezone/zic.c:745 timezone/zic.c:747 msgid "same rule name in multiple files" msgstr "在多個檔案裡面有相同的規則名稱" #: timezone/zic.c:788 msgid "unruly zone" msgstr "沒有規則的時區" #: timezone/zic.c:795 #, c-format msgid "%s in ruleless zone" msgstr "%s 在沒有規則的區段" #: timezone/zic.c:816 msgid "standard input" msgstr "標準輸入" #: timezone/zic.c:821 #, c-format msgid "%s: Can't open %s: %s\n" msgstr "%s: 無法開啟 %s: %s\n" #: timezone/zic.c:832 msgid "line too long" msgstr "行的長度過長" #: timezone/zic.c:852 msgid "input line of unknown type" msgstr "不明型別的輸入行" #: timezone/zic.c:868 #, c-format msgid "%s: Leap line in non leap seconds file %s\n" msgstr "%s: 閏時設定行 (leap line) 出現在不含閏秒的設定檔 %s 中\n" #: timezone/zic.c:875 timezone/zic.c:1312 timezone/zic.c:1334 #, c-format msgid "%s: panic: Invalid l_value %d\n" msgstr "%s: 嚴重錯誤: 錯誤的左值 (l_value) %d\n" #: timezone/zic.c:883 #, c-format msgid "%s: Error reading %s\n" msgstr "%s: 讀取錯誤 %s\n" #: timezone/zic.c:890 #, c-format msgid "%s: Error closing %s: %s\n" msgstr "%s: 關閉錯誤 %s: %s\n" #: timezone/zic.c:895 msgid "expected continuation line not found" msgstr "找不到預期的接續行" #: timezone/zic.c:939 timezone/zic.c:2476 timezone/zic.c:2495 msgid "time overflow" msgstr "時間溢位" #: timezone/zic.c:943 msgid "24:00 not handled by pre-1998 versions of zic" msgstr "" #: timezone/zic.c:946 msgid "values over 24 hours not handled by pre-2007 versions of zic" msgstr "" #: timezone/zic.c:959 msgid "wrong number of fields on Rule line" msgstr "規則設定行的欄位數目錯誤" #: timezone/zic.c:963 msgid "nameless rule" msgstr "規則沒有名稱" #: timezone/zic.c:968 msgid "invalid saved time" msgstr "無效的節約時間" #: timezone/zic.c:989 msgid "wrong number of fields on Zone line" msgstr "時區設定行的欄位數目錯誤" #: timezone/zic.c:995 #, c-format msgid "\"Zone %s\" line and -l option are mutually exclusive" msgstr "\"區段 %s\" 行和 -l 選項是互斥的" #: timezone/zic.c:1003 #, c-format msgid "\"Zone %s\" line and -p option are mutually exclusive" msgstr "\"區段 %s\" 行和 -p 選項是互斥的" #: timezone/zic.c:1015 #, c-format msgid "duplicate zone name %s (file \"%s\", line %d)" msgstr "複製時區名稱 %s (檔案 \"%s\", 第 %d 行)" #: timezone/zic.c:1031 msgid "wrong number of fields on Zone continuation line" msgstr "時區接續行的欄位數目不對" #: timezone/zic.c:1071 msgid "invalid UTC offset" msgstr "無效的 UTC 位移值" #: timezone/zic.c:1074 msgid "invalid abbreviation format" msgstr "無效的縮寫格式" #: timezone/zic.c:1103 msgid "Zone continuation line end time is not after end time of previous line" msgstr "時區接續行的結束時間不在上一行的結束時間之後" #: timezone/zic.c:1131 msgid "wrong number of fields on Leap line" msgstr "閏時設定行的欄位數目錯誤" #: timezone/zic.c:1140 msgid "invalid leaping year" msgstr "無效的閏年" #: timezone/zic.c:1160 timezone/zic.c:1266 msgid "invalid month name" msgstr "無效的月份名稱" #: timezone/zic.c:1173 timezone/zic.c:1379 timezone/zic.c:1393 msgid "invalid day of month" msgstr "無效的日期數字" #: timezone/zic.c:1178 msgid "time before zero" msgstr "在零之前的時間" #: timezone/zic.c:1182 msgid "time too small" msgstr "時間太小" #: timezone/zic.c:1186 msgid "time too large" msgstr "時間太大" #: timezone/zic.c:1190 timezone/zic.c:1295 msgid "invalid time of day" msgstr "無效的時間數字" #: timezone/zic.c:1209 msgid "illegal CORRECTION field on Leap line" msgstr "在閏時設定行中有不合法的 CORRECTION 欄位" #: timezone/zic.c:1214 msgid "illegal Rolling/Stationary field on Leap line" msgstr "在閏時設定行中有不合法的 Rolling/Stationary 欄位" #: timezone/zic.c:1230 msgid "wrong number of fields on Link line" msgstr "連結設定行的欄位數目錯誤" #: timezone/zic.c:1234 msgid "blank FROM field on Link line" msgstr "Link 行中空白的 FROM 欄位" #: timezone/zic.c:1238 msgid "blank TO field on Link line" msgstr "Link 行中空白的 TO 欄位" #: timezone/zic.c:1316 msgid "invalid starting year" msgstr "無效的起始年份" #: timezone/zic.c:1338 msgid "invalid ending year" msgstr "無效的結束年份" #: timezone/zic.c:1342 msgid "starting year greater than ending year" msgstr "起始年份比結束年份還要大" #: timezone/zic.c:1349 msgid "typed single year" msgstr "輸入的年份是同一年" #: timezone/zic.c:1384 msgid "invalid weekday name" msgstr "無效的工作日 (weekday) 名稱" #: timezone/zic.c:1562 #, c-format msgid "%s: Can't remove %s: %s\n" msgstr "%s: 無法移除 %s: %s\n" #: timezone/zic.c:1572 #, c-format msgid "%s: Can't create %s: %s\n" msgstr "%s: 無法產生 %s: %s\n" #: timezone/zic.c:1722 #, c-format msgid "%s: Error writing %s\n" msgstr "%s: 寫入錯誤 %s\n" #: timezone/zic.c:2015 msgid "no POSIX environment variable for zone" msgstr "" #: timezone/zic.c:2172 msgid "can't determine time zone abbreviation to use just after until time" msgstr "無法決定在結束時間 (untiltime) 以後該使用的時區簡寫" #: timezone/zic.c:2218 msgid "too many transitions?!" msgstr "太多時間轉換了?!" #: timezone/zic.c:2237 msgid "internal error - addtype called with bad isdst" msgstr "內部錯誤 - 用錯誤的 isdst 呼叫 addtype 函式" #: timezone/zic.c:2241 msgid "internal error - addtype called with bad ttisstd" msgstr "內部錯誤 - 用錯誤的 ttisstd 呼叫 addtype 函式" #: timezone/zic.c:2245 msgid "internal error - addtype called with bad ttisgmt" msgstr "內部錯誤 - 用錯誤的 ttisgmt 呼叫 addtype 函式" #: timezone/zic.c:2264 msgid "too many local time types" msgstr "太多本地時間格式了" #: timezone/zic.c:2268 #, fuzzy msgid "UTC offset out of range" msgstr "通道號碼超出範圍" #: timezone/zic.c:2296 msgid "too many leap seconds" msgstr "太多閏秒了" #: timezone/zic.c:2302 msgid "repeated leap second moment" msgstr "重複的閏秒設定" #: timezone/zic.c:2354 msgid "Wild result from command execution" msgstr "命令執行導至奇怪的結果" #: timezone/zic.c:2355 #, c-format msgid "%s: command was '%s', result was %d\n" msgstr "%s: 輸入命令為 '%s', 結果為 %d\n" #: timezone/zic.c:2453 msgid "Odd number of quotation marks" msgstr "引號數目為奇數" #: timezone/zic.c:2542 msgid "use of 2/29 in non leap-year" msgstr "在非閏年時用到 2/29 日" #: timezone/zic.c:2577 msgid "rule goes past start/end of month--will not work with pre-2004 versions of zic" msgstr "" #: timezone/zic.c:2609 msgid "time zone abbreviation lacks alphabetic at start" msgstr "" #: timezone/zic.c:2611 msgid "time zone abbreviation has more than 3 alphabetics" msgstr "" #: timezone/zic.c:2613 msgid "time zone abbreviation has too many alphabetics" msgstr "" #: timezone/zic.c:2623 msgid "time zone abbreviation differs from POSIX standard" msgstr "" #: timezone/zic.c:2635 msgid "too many, or too long, time zone abbreviations" msgstr "時區縮寫太多或者太長了" #: timezone/zic.c:2676 #, c-format msgid "%s: Can't create directory %s: %s\n" msgstr "%s: 無法建立目錄 %s: %s\n" #: timezone/zic.c:2698 #, c-format msgid "%s: %d did not sign extend correctly\n" msgstr "%s: %d 無法正確地延展訊號\n" #~ msgid "Report bugs using the `glibcbug' script to .\n" #~ msgstr "請使用 `glibcbug' 命令稿將問題回報至 。\n" #~ msgid "<%s> and <%s> are illegal names for range" #~ msgstr "<%s> 以及 <%s> 是不合法的範圍名稱" #~ msgid "upper limit in range is not higher then lower limit" #~ msgstr "區域定義中的最大值沒有比最小值還要大" #~ msgid "%s: character `%s' not defined in charmap while needed as default value" #~ msgstr "%s: 字元 `%s' 在字集對照表中沒有定義，但它是必需的預設值" #~ msgid "character `%s' not defined while needed as default value" #~ msgstr "必須用來作為預設值的字元 `%s' 沒有被定義到" #~ msgid "%s: value for field `%s' must not be the empty string" #~ msgstr "%s: 欄位 `%s' 值不可以是空字串" #~ msgid "%s: stopping date is invalid in string %Zd in `era' field" #~ msgstr "%s: 在 `era' 區域的字串 %Zd 中的結束日期是不適用的" #~ msgid "%s: values of field `%s' must not be larger than %d" #~ msgstr "%s: 欄位 `%s' 的值不可以大於 %d" #~ msgid "cheese" #~ msgstr "請微笑" #~ msgid "First string for testing." #~ msgstr "第一個字串接受測試。" #~ msgid "Another string for testing." #~ msgstr "另一個受測試的字串。" #~ msgid "Error 0" #~ msgstr "第 0 號錯誤" #~ msgid "I/O error" #~ msgstr "I/O 錯誤" #~ msgid "Arg list too long" #~ msgstr "Arg 串列太長" #~ msgid "Bad file number" #~ msgstr "錯誤的檔案號碼" #~ msgid "Not enough space" #~ msgstr "空間不足" #~ msgid "Device busy" #~ msgstr "裝置忙碌中" #~ msgid "Cross-device link" #~ msgstr "裝置之間的連接" #~ msgid "File table overflow" #~ msgstr "檔案表已滿" #~ msgid "Argument out of domain" #~ msgstr "引數超過範圍" #~ msgid "Result too large" #~ msgstr "結果太大了" #~ msgid "Deadlock situation detected/avoided" #~ msgstr "偵測/避免停頓狀態" #~ msgid "No record locks available" #~ msgstr "沒有可用的紀錄鎖了" #~ msgid "Disc quota exceeded" #~ msgstr "Disc quota 滿了" #~ msgid "Bad exchange descriptor" #~ msgstr "錯誤的交換敘述項" #~ msgid "Bad request descriptor" #~ msgstr "錯誤的請求敘述項" #~ msgid "Message tables full" #~ msgstr "訊息表格已滿" #~ msgid "Anode table overflow" #~ msgstr "Anode 表格溢出" #~ msgid "Bad request code" #~ msgstr "錯誤的請求訊號編碼" #~ msgid "File locking deadlock" #~ msgstr "檔案鎖定停頓" #~ msgid "Error 58" #~ msgstr "第 58 號錯誤" #~ msgid "Error 59" #~ msgstr "第 59 號錯誤" #~ msgid "Not a stream device" #~ msgstr "並非資料流裝置" #~ msgid "Out of stream resources" #~ msgstr "資料流資源用盡" #~ msgid "Error 72" #~ msgstr "第 72 號錯誤" #~ msgid "Error 73" #~ msgstr "第 73 號錯誤" #~ msgid "Error 75" #~ msgstr "第 75 號錯誤" #~ msgid "Error 76" #~ msgstr "第 76 號錯誤" #~ msgid "Not a data message" #~ msgstr "並不是一個資料訊息" #~ msgid "Attempting to link in more shared libraries than system limit" #~ msgstr "嘗試去連結超過系統上限的分享資料庫" #~ msgid "Can not exec a shared library directly" #~ msgstr "無法直接執行分享函式庫" #~ msgid "Illegal byte sequence" #~ msgstr "不合法的位元組序列" #~ msgid "Operation not applicable" #~ msgstr "此項操作並不適當" #~ msgid "Number of symbolic links encountered during path name traversal exceeds MAXSYMLINKS" #~ msgstr "尋找路徑名稱時遭遇的符號連結數目超過 MAXSYMLINKS 裡面定義的最大值" #~ msgid "Error 91" #~ msgstr "第 91 號錯誤" #~ msgid "Error 92" #~ msgstr "第 92 號錯誤" #~ msgid "Option not supported by protocol" #~ msgstr "通訊協定並不支援此參數" #~ msgid "Error 100" #~ msgstr "第 100 號錯誤" #~ msgid "Error 101" #~ msgstr "第 101 號錯誤" #~ msgid "Error 102" #~ msgstr "第 102 號錯誤" #~ msgid "Error 103" #~ msgstr "第 103 號錯誤" #~ msgid "Error 104" #~ msgstr "第 104 號錯誤" #~ msgid "Error 105" #~ msgstr "第 105 號錯誤" #~ msgid "Error 106" #~ msgstr "第 106 號錯誤" #~ msgid "Error 107" #~ msgstr "第 107 號錯誤" #~ msgid "Error 108" #~ msgstr "第 108 號錯誤" #~ msgid "Error 109" #~ msgstr "第 109 號錯誤" #~ msgid "Error 110" #~ msgstr "第 110 號錯誤" #~ msgid "Error 111" #~ msgstr "第 111 號錯誤" #~ msgid "Error 112" #~ msgstr "第 112 號錯誤" #~ msgid "Error 113" #~ msgstr "第 113 號錯誤" #~ msgid "Error 114" #~ msgstr "第 114 號錯誤" #~ msgid "Error 115" #~ msgstr "第 115 號錯誤" #~ msgid "Error 116" #~ msgstr "第 116 號錯誤" #~ msgid "Error 117" #~ msgstr "第 117 號錯誤" #~ msgid "Error 118" #~ msgstr "第 118 號錯誤" #~ msgid "Error 119" #~ msgstr "第 119 號錯誤" #~ msgid "Operation not supported on transport endpoint" #~ msgstr "此項操作在傳輸終點時並不被支援" #~ msgid "Address family not supported by protocol family" #~ msgstr "位址族群不被協定族群所支援" #~ msgid "Network dropped connection because of reset" #~ msgstr "網路連線漏失，因為重設" #~ msgid "Error 136" #~ msgstr "第 136 號錯誤" #~ msgid "Not available" #~ msgstr "不存在" #~ msgid "Is a name file" #~ msgstr "是個有名字的檔案" #~ msgid "Reserved for future use" #~ msgstr "保留給將來使用" #~ msgid "Error 142" #~ msgstr "第 142 號錯誤" #~ msgid "Cannot send after socket shutdown" #~ msgstr "無法在 socket 關閉後傳送" #~ msgid "%s: Can't unlink %s: %s\n" #~ msgstr "%s: 無法取消連結 %s: %s\n" #~ msgid "starting year too low to be represented" #~ msgstr "起始年份太低，無法表示" #~ msgid "starting year too high to be represented" #~ msgstr "起始年份太高，無法表示" #~ msgid "ending year too low to be represented" #~ msgstr "結束年份太低，無法表示" #~ msgid "ending year too high to be represented" #~ msgstr "結束年份太高，無法表示" #~ msgid "no day in month matches rule" #~ msgstr "在月份資料中找不到符合規則的日數" #~ msgid "%s: illegal option -- %c\n" #~ msgstr "%s: 不合法的選項 -- %c\n" #~ msgid "%s: line %d: expected service, found `%s'\n" #~ msgstr "%s: 第 %d 列: 期待一項服務，卻發現 `%s'\n" #~ msgid "%s: line %d: cannot specify more than %d services" #~ msgstr "%s: 第 %d 列: 無法指定超過 %d 個服務" #~ msgid "%s: line %d: list delimiter not followed by keyword" #~ msgstr "%s: 第 %d 列: 關鍵字不可跟在表列分隔字元之後" #~ msgid "authunix_create: out of memory\n" #~ msgstr "authunix_create: 記憶體不足\n" #~ msgid "clnttcp_create: out of memory\n" #~ msgstr "clnttcp_create: 記憶體不足\n" #~ msgid "clntudp_create: out of memory\n" #~ msgstr "clntudp_create: 記憶體不足\n" #~ msgid "clntunix_create: out of memory\n" #~ msgstr "clntunix_create: 記憶體不足\n" #~ msgid "get_myaddress: ioctl (get interface configuration)" #~ msgstr "get_myaddress: ioctl (取得介面設定資料)" #~ msgid "__get_myaddress: ioctl (get interface configuration)" #~ msgstr "__get_myaddress: ioctl (取得介面組態)" #~ msgid "broadcast: ioctl (get interface configuration)" #~ msgstr "broadcast: ioctl (取得介面設定值)" #~ msgid "broadcast: ioctl (get interface flags)" #~ msgstr "broadcast: ioctl (取得介面旗標)" #~ msgid "svc_tcp: makefd_xprt: out of memory\n" #~ msgstr "svc_tcp: makefd_xprt: 記憶體不足\n" #~ msgid "svcudp_create: out of memory\n" #~ msgstr "svcudp_create: 記憶體不足\n" #~ msgid "svcunix_create: out of memory\n" #~ msgstr "svcunix_create: 記憶體不足\n" #~ msgid "svc_unix: makefd_xprt: out of memory\n" #~ msgstr "svc_unix: makefd_xprt: 記憶體不足\n" #~ msgid "xdr_bytes: out of memory\n" #~ msgstr "xdr_bytes: 記憶體不足\n" #~ msgid "xdr_string: out of memory\n" #~ msgstr "xdr_string: 記憶體不足\n" #~ msgid "xdr_array: out of memory\n" #~ msgstr "xdr_array: 記憶體不足\n" #~ msgid "xdrrec_create: out of memory\n" #~ msgstr "xdrrec_create: 記憶體不足\n" #~ msgid "xdr_reference: out of memory\n" #~ msgstr "xdr_reference: 記憶體不足\n" #~ msgid "YPBINDPROC_DOMAIN: %s\n" #~ msgstr "YPBINDPROC_DOMAIN: %s\n" #~ msgid "while allocating hash table entry" #~ msgstr "在配置 hash 表格項目時" #~ msgid "Cannot run nscd in secure mode as unprivileged user" #~ msgstr "無法以未獲授權的使用者身分在安全模式中執行 nscd" #~ msgid "while allocating cache: %s" #~ msgstr "當配置快取項目: %s" #~ msgid "while accepting connection: %s" #~ msgstr "在接受連線時: %s" #~ msgid "while allocating key copy" #~ msgstr "在配置鍵值副本時" #~ msgid "while allocating cache entry" #~ msgstr "在配置快取項目時" #~ msgid "Haven't found \"%d\" in group cache!" #~ msgstr "尚未在群組快取中找到 \"%d\"!" #~ msgid "%15lu number of times clients had to wait\n" #~ msgstr "%15lu 次數 須等待客戶端\n" #~ msgid " no" #~ msgstr " 不" #~ msgid " yes" #~ msgstr " 是" #~ msgid "Haven't found \"%d\" in password cache!" #~ msgstr "尚未在密碼快取中找到 \"%d\"!" #~ msgid "Can't remove old temporary cache file %s" #~ msgstr "無法刪除舊的暫時快取檔 %s" #~ msgid "Writing of cache data failed." #~ msgstr "寫入快取資料時發生錯誤" #~ msgid "empty dynamics string token substitution" #~ msgstr "空的動態字串記號替換" #~ msgid "cannot create searchlist" #~ msgstr "無法建立搜尋列表" #~ msgid "%s: profiler out of memory shadowing PLTREL of %s\n" #~ msgstr "%s: 描述程式遮蔽 %s 的 PLTREL 時記憶體不足\n" #~ msgid "Can't lstat %s" #~ msgstr "無法 lstat %s"