# Traditional Chinese Messages for util-linux. # Copyright (C) 2005 Free Software Foundation, Inc. # This file is distributed under the same license as the util-linux package. # Wei-Lun Chao , 2010. # msgid "" msgstr "" "Project-Id-Version: util-linux 2.23.1\n" "Report-Msgid-Bugs-To: util-linux@vger.kernel.org\n" "POT-Creation-Date: 2018-03-01 14:21+0100\n" "PO-Revision-Date: 2013-06-07 23:29+0800\n" "Last-Translator: Wei-Lun Chao \n" "Language-Team: Chinese (traditional) \n" "Language: zh_TW\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Bugs: Report translation errors to the Language-Team address.\n" "Plural-Forms: nplurals=1; plural=0;\n" #: disk-utils/addpart.c:15 #, fuzzy, c-format msgid " %s \n" msgstr " %s <分割區編號><開始><長度>\n" #: disk-utils/addpart.c:19 msgid "Tell the kernel about the existence of a specified partition.\n" msgstr "" #: disk-utils/addpart.c:53 disk-utils/blockdev.c:244 disk-utils/delpart.c:53 #: disk-utils/mkfs.bfs.c:133 disk-utils/resizepart.c:95 misc-utils/kill.c:269 #: misc-utils/kill.c:311 misc-utils/rename.c:199 misc-utils/whereis.c:518 #: sys-utils/flock.c:175 sys-utils/ipcrm.c:160 sys-utils/ldattach.c:368 #: sys-utils/renice.c:146 sys-utils/switch_root.c:241 sys-utils/tunelp.c:152 #: term-utils/agetty.c:859 term-utils/agetty.c:860 term-utils/agetty.c:868 #: term-utils/agetty.c:869 #, fuzzy msgid "not enough arguments" msgstr "不足引數" #: disk-utils/addpart.c:58 disk-utils/blockdev.c:295 disk-utils/blockdev.c:439 #: disk-utils/blockdev.c:465 disk-utils/cfdisk.c:2718 disk-utils/delpart.c:59 #: disk-utils/fdformat.c:229 disk-utils/fdisk.c:764 disk-utils/fdisk.c:1066 #: disk-utils/fdisk-list.c:321 disk-utils/fdisk-list.c:361 #: disk-utils/fdisk-list.c:380 disk-utils/fsck.c:1470 #: disk-utils/fsck.cramfs.c:152 disk-utils/fsck.cramfs.c:512 #: disk-utils/isosize.c:102 disk-utils/mkfs.bfs.c:192 #: disk-utils/mkfs.cramfs.c:171 disk-utils/mkfs.cramfs.c:660 #: disk-utils/mkfs.cramfs.c:800 disk-utils/mkfs.minix.c:824 #: disk-utils/mkswap.c:217 disk-utils/mkswap.c:246 disk-utils/partx.c:1013 #: disk-utils/resizepart.c:103 disk-utils/sfdisk.c:655 disk-utils/sfdisk.c:711 #: disk-utils/sfdisk.c:765 disk-utils/sfdisk.c:824 disk-utils/sfdisk.c:898 #: disk-utils/sfdisk.c:939 disk-utils/sfdisk.c:969 disk-utils/sfdisk.c:1006 #: disk-utils/sfdisk.c:1565 disk-utils/swaplabel.c:65 libfdisk/src/bsd.c:640 #: lib/path.c:95 lib/path.c:113 login-utils/islocal.c:87 #: login-utils/last.c:674 login-utils/sulogin.c:443 login-utils/sulogin.c:480 #: login-utils/utmpdump.c:134 login-utils/utmpdump.c:352 #: login-utils/utmpdump.c:374 login-utils/vipw.c:261 login-utils/vipw.c:279 #: misc-utils/findmnt.c:1099 misc-utils/logger.c:1223 misc-utils/mcookie.c:115 #: misc-utils/uuidd.c:198 sys-utils/blkdiscard.c:182 sys-utils/blkzone.c:96 #: sys-utils/dmesg.c:524 sys-utils/eject.c:499 sys-utils/eject.c:695 #: sys-utils/fallocate.c:396 sys-utils/fsfreeze.c:117 sys-utils/fstrim.c:71 #: sys-utils/hwclock.c:227 sys-utils/hwclock.c:814 sys-utils/hwclock-rtc.c:400 #: sys-utils/hwclock-rtc.c:435 sys-utils/ldattach.c:392 #: sys-utils/nsenter.c:129 sys-utils/rfkill.c:193 sys-utils/rfkill.c:544 #: sys-utils/rtcwake.c:136 sys-utils/rtcwake.c:286 sys-utils/setpriv.c:276 #: sys-utils/setpriv.c:614 sys-utils/setpriv.c:637 sys-utils/swapon.c:375 #: sys-utils/swapon.c:518 sys-utils/switch_root.c:167 sys-utils/unshare.c:108 #: sys-utils/unshare.c:123 sys-utils/wdctl.c:322 sys-utils/wdctl.c:378 #: sys-utils/zramctl.c:508 term-utils/agetty.c:2752 term-utils/mesg.c:127 #: term-utils/script.c:460 term-utils/script.c:468 term-utils/script.c:559 #: term-utils/scriptreplay.c:198 term-utils/scriptreplay.c:201 #: term-utils/wall.c:419 text-utils/colcrt.c:282 text-utils/more.c:534 #: text-utils/rev.c:141 text-utils/ul.c:230 #, c-format msgid "cannot open %s" msgstr "無法開啟 %s" #: disk-utils/addpart.c:61 disk-utils/delpart.c:62 disk-utils/resizepart.c:100 #, fuzzy msgid "invalid partition number argument" msgstr "無效的分割區編號引數" #: disk-utils/addpart.c:62 #, fuzzy msgid "invalid start argument" msgstr "無效的開始引數" #: disk-utils/addpart.c:63 disk-utils/resizepart.c:110 #, fuzzy msgid "invalid length argument" msgstr "無效的長度引數" #: disk-utils/addpart.c:64 #, fuzzy msgid "failed to add partition" msgstr "加入分割時失敗" #: disk-utils/blockdev.c:63 msgid "set read-only" msgstr "設定唯讀" #: disk-utils/blockdev.c:70 msgid "set read-write" msgstr "設定可讀寫" #: disk-utils/blockdev.c:76 msgid "get read-only" msgstr "取得唯讀" #: disk-utils/blockdev.c:82 #, fuzzy msgid "get discard zeroes support status" msgstr "提取捨棄零支援狀態" #: disk-utils/blockdev.c:88 msgid "get logical block (sector) size" msgstr "取得邏輯區塊 (磁區) 大小" #: disk-utils/blockdev.c:94 msgid "get physical block (sector) size" msgstr "取得實際區塊 (磁區) 大小" #: disk-utils/blockdev.c:100 msgid "get minimum I/O size" msgstr "取得最小 I/O 大小" #: disk-utils/blockdev.c:106 msgid "get optimal I/O size" msgstr "取得最佳化 I/O 大小" #: disk-utils/blockdev.c:112 #, fuzzy msgid "get alignment offset in bytes" msgstr "提取對齊偏移在中位元組" #: disk-utils/blockdev.c:118 msgid "get max sectors per request" msgstr "取得單一要求最大磁區" #: disk-utils/blockdev.c:124 msgid "get blocksize" msgstr "取得區塊大小" #: disk-utils/blockdev.c:131 msgid "set blocksize on file descriptor opening the block device" msgstr "" #: disk-utils/blockdev.c:137 #, fuzzy msgid "get 32-bit sector count (deprecated, use --getsz)" msgstr "提取 32-bit 磁區計數 (不宜用，使用 --getsz)" #: disk-utils/blockdev.c:143 msgid "get size in bytes" msgstr "以位元組為單位取得大小" #: disk-utils/blockdev.c:150 msgid "set readahead" msgstr "設定預先讀取" #: disk-utils/blockdev.c:156 msgid "get readahead" msgstr "取得預先讀取" #: disk-utils/blockdev.c:163 msgid "set filesystem readahead" msgstr "設定檔案系統預先讀取" #: disk-utils/blockdev.c:169 msgid "get filesystem readahead" msgstr "取得檔案系統預先讀取" #: disk-utils/blockdev.c:173 msgid "flush buffers" msgstr "清理緩衝區" #: disk-utils/blockdev.c:177 msgid "reread partition table" msgstr "重新讀取分割表" #: disk-utils/blockdev.c:187 #, c-format msgid "" " %1$s [-v|-q] commands devices\n" " %1$s --report [devices]\n" " %1$s -h|-V\n" msgstr "" #: disk-utils/blockdev.c:193 msgid "Call block device ioctls from the command line." msgstr "" #: disk-utils/blockdev.c:196 #, fuzzy #| msgid " parameters\n" msgid " -q quiet mode" msgstr " 參數\n" #: disk-utils/blockdev.c:197 #, fuzzy msgid " -v verbose mode" msgstr " -v, --verbose 列印詳細的資料\n" #: disk-utils/blockdev.c:198 msgid " --report print report for specified (or all) devices" msgstr "" #: disk-utils/blockdev.c:203 #, fuzzy msgid "Available commands:" msgstr "可用欄位：\n" #: disk-utils/blockdev.c:204 #, fuzzy, c-format msgid " %-25s get size in 512-byte sectors\n" msgstr " %-25s 提取大小在中 512-byte 磁區\n" #: disk-utils/blockdev.c:288 disk-utils/fdformat.c:219 #: disk-utils/fsck.minix.c:1341 disk-utils/isosize.c:205 #: disk-utils/mkfs.bfs.c:181 disk-utils/mkfs.c:116 disk-utils/mkfs.minix.c:813 #: disk-utils/swaplabel.c:181 misc-utils/wipefs.c:718 #: sys-utils/blkdiscard.c:171 sys-utils/blkzone.c:394 sys-utils/tunelp.c:242 #: sys-utils/zramctl.c:689 sys-utils/zramctl.c:715 #, fuzzy msgid "no device specified" msgstr "沒有迴圈裝置指定的" #: disk-utils/blockdev.c:330 #, fuzzy msgid "could not get device size" msgstr "無法提取裝置大小" #: disk-utils/blockdev.c:336 #, fuzzy, c-format msgid "Unknown command: %s" msgstr "不明命令：%s" #: disk-utils/blockdev.c:352 #, fuzzy, c-format msgid "%s requires an argument" msgstr "%s 需要一個引數" #: disk-utils/blockdev.c:387 disk-utils/blockdev.c:493 #, fuzzy, c-format msgid "ioctl error on %s" msgstr "ioctl 錯誤於 %s" #: disk-utils/blockdev.c:389 #, c-format msgid "%s failed.\n" msgstr "%s 失敗。\n" #: disk-utils/blockdev.c:396 #, c-format msgid "%s succeeded.\n" msgstr "%s 成功。\n" #: disk-utils/blockdev.c:476 #, fuzzy, c-format msgid "%s: failed to initialize sysfs handler" msgstr "%s：無法初始化 sysfs 處理常式" #: disk-utils/blockdev.c:480 #, fuzzy, c-format msgid "%s: failed to read partition start from sysfs" msgstr "%s：無法讀取分割表" #: disk-utils/blockdev.c:501 #, c-format msgid "RO RA SSZ BSZ StartSec Size Device\n" msgstr "RO RA SSZ BSZ 起始磁區 大小 裝置\n" #: disk-utils/cfdisk.c:186 msgid "Bootable" msgstr "可開機" #: disk-utils/cfdisk.c:186 msgid "Toggle bootable flag of the current partition" msgstr "切換目前分割區的屬性旗標" #: disk-utils/cfdisk.c:187 msgid "Delete" msgstr "刪除" #: disk-utils/cfdisk.c:187 msgid "Delete the current partition" msgstr "刪除目前的分割區" #: disk-utils/cfdisk.c:188 msgid "Resize" msgstr "" #: disk-utils/cfdisk.c:188 #, fuzzy #| msgid "Delete the current partition" msgid "Reduce or enlarge the current partition" msgstr "刪除目前的分割區" #: disk-utils/cfdisk.c:189 msgid "New" msgstr "新增" #: disk-utils/cfdisk.c:189 msgid "Create new partition from free space" msgstr "從剩餘空間新增一個新的分割區" #: disk-utils/cfdisk.c:190 msgid "Quit" msgstr "離開" #: disk-utils/cfdisk.c:190 #, fuzzy #| msgid "Quit program without writing partition table" msgid "Quit program without writing changes" msgstr "離開本程式且不寫入分割表" #: disk-utils/cfdisk.c:191 libfdisk/src/bsd.c:438 libfdisk/src/bsd.c:1022 #: libfdisk/src/dos.c:2431 libfdisk/src/gpt.c:3132 libfdisk/src/sgi.c:1159 #: libfdisk/src/sun.c:1126 msgid "Type" msgstr "類型" #: disk-utils/cfdisk.c:191 #, fuzzy msgid "Change the partition type" msgstr "列印分割表" #: disk-utils/cfdisk.c:192 msgid "Help" msgstr "求助" #: disk-utils/cfdisk.c:192 msgid "Print help screen" msgstr "顯示說明畫面" #: disk-utils/cfdisk.c:193 msgid "Sort" msgstr "" #: disk-utils/cfdisk.c:193 #, fuzzy msgid "Fix partitions order" msgstr "修正分割排序" #: disk-utils/cfdisk.c:194 msgid "Write" msgstr "寫入" #: disk-utils/cfdisk.c:194 msgid "Write partition table to disk (this might destroy data)" msgstr "寫入分割表至硬碟中 (可能使該分割區中的資料消失!)" #: disk-utils/cfdisk.c:195 msgid "Dump" msgstr "" #: disk-utils/cfdisk.c:195 #, fuzzy #| msgid "Print partition table to the screen or to a file" msgid "Dump partition table to sfdisk compatible script file" msgstr "印出分割表至螢幕或檔案" #: disk-utils/cfdisk.c:642 disk-utils/fdisk.c:461 #, c-format msgid "internal error: unsupported dialog type %d" msgstr "" #: disk-utils/cfdisk.c:1277 #, fuzzy, c-format msgid "%s (mounted)" msgstr "%s：無法掛載" #: disk-utils/cfdisk.c:1297 #, fuzzy msgid "Partition name:" msgstr "分割名稱" #: disk-utils/cfdisk.c:1304 #, fuzzy msgid "Partition UUID:" msgstr "分割 UUID" #: disk-utils/cfdisk.c:1316 #, fuzzy #| msgid "Virtualization type:" msgid "Partition type:" msgstr "虛擬型態：" #: disk-utils/cfdisk.c:1323 msgid "Attributes:" msgstr "" #: disk-utils/cfdisk.c:1347 #, fuzzy msgid "Filesystem UUID:" msgstr "檔案系統 UUID" #: disk-utils/cfdisk.c:1354 #, fuzzy msgid "Filesystem LABEL:" msgstr "檔案系統標貼" #: disk-utils/cfdisk.c:1360 #, fuzzy msgid "Filesystem:" msgstr "郵件系統" #: disk-utils/cfdisk.c:1365 #, fuzzy msgid "Mountpoint:" msgstr "mountpoint" #: disk-utils/cfdisk.c:1708 #, fuzzy, c-format #| msgid "disk: %.*s\n" msgid "Disk: %s" msgstr "磁碟：%.*s\n" #: disk-utils/cfdisk.c:1710 #, c-format msgid "Size: %s, %ju bytes, %ju sectors" msgstr "" #: disk-utils/cfdisk.c:1713 #, fuzzy, c-format #| msgid "Disk identifier: 0x%08x\n" msgid "Label: %s, identifier: %s" msgstr "磁碟識別碼：0x%08x\n" #: disk-utils/cfdisk.c:1716 #, fuzzy, c-format #| msgid "label: %.*s\n" msgid "Label: %s" msgstr "標籤：%.*s\n" #: disk-utils/cfdisk.c:1866 msgid "May be followed by M for MiB, G for GiB, T for TiB, or S for sectors." msgstr "" #: disk-utils/cfdisk.c:1872 #, fuzzy #| msgid "no filename specified." msgid "Please, specify size." msgstr "未指定任何檔名。" #: disk-utils/cfdisk.c:1894 #, fuzzy, c-format #| msgid "get size in bytes" msgid "Minimum size is %ju bytes." msgstr "以位元組為單位取得大小" #: disk-utils/cfdisk.c:1903 #, fuzzy, c-format #| msgid "get size in bytes" msgid "Maximum size is %ju bytes." msgstr "以位元組為單位取得大小" #: disk-utils/cfdisk.c:1910 #, fuzzy msgid "Failed to parse size." msgstr "剖析大小時失敗" #: disk-utils/cfdisk.c:1968 #, fuzzy msgid "Select partition type" msgstr "已選分割區 %d\n" #: disk-utils/cfdisk.c:2018 disk-utils/cfdisk.c:2048 #, fuzzy msgid "Enter script file name: " msgstr "無法寫入指令稿檔案" #: disk-utils/cfdisk.c:2019 #, fuzzy #| msgid "You will not be able to write the partition table.\n" msgid "The script file will be applied to in-memory partition table." msgstr "您將不能寫入分割表。\n" #: disk-utils/cfdisk.c:2028 disk-utils/cfdisk.c:2070 #: disk-utils/fdisk-menu.c:480 disk-utils/fdisk-menu.c:524 #, fuzzy, c-format #| msgid "Cannot open %s\n" msgid "Cannot open %s" msgstr "無法開啟 %s\n" #: disk-utils/cfdisk.c:2030 disk-utils/fdisk-menu.c:482 #, fuzzy, c-format #| msgid "failed to read typescript file %s" msgid "Failed to parse script file %s" msgstr "讀取 typescript 檔案 %s 時失敗" #: disk-utils/cfdisk.c:2032 disk-utils/fdisk-menu.c:484 #, fuzzy, c-format #| msgid "failed to read typescript file %s" msgid "Failed to apply script %s" msgstr "讀取 typescript 檔案 %s 時失敗" #: disk-utils/cfdisk.c:2049 msgid "The current in-memory partition table will be dumped to the file." msgstr "" #: disk-utils/cfdisk.c:2057 disk-utils/fdisk-menu.c:512 #, fuzzy msgid "Failed to allocate script handler" msgstr "配置迭代器時失敗" #: disk-utils/cfdisk.c:2063 #, fuzzy #| msgid "failed to add line to output" msgid "Failed to read disk layout into script." msgstr "加入輸出列時失敗" #: disk-utils/cfdisk.c:2077 msgid "Disk layout successfully dumped." msgstr "" #: disk-utils/cfdisk.c:2080 disk-utils/fdisk-menu.c:530 #, fuzzy, c-format #| msgid "failed to read typescript file %s" msgid "Failed to write script %s" msgstr "讀取 typescript 檔案 %s 時失敗" #: disk-utils/cfdisk.c:2116 #, fuzzy #| msgid "Illegal type\n" msgid "Select label type" msgstr "不合法的類型\n" #: disk-utils/cfdisk.c:2119 disk-utils/fdisk.c:1074 #: disk-utils/fdisk-menu.c:488 #, fuzzy msgid "Device does not contain a recognized partition table." msgstr "裝置不包含辨識的分割表\n" #: disk-utils/cfdisk.c:2127 msgid "Select a type to create a new label or press 'L' to load script file." msgstr "" #: disk-utils/cfdisk.c:2176 #, fuzzy #| msgid "This is cfdisk, a curses based disk partitioning program, which" msgid "This is cfdisk, a curses-based disk partitioning program." msgstr "本程式 cfdisk，是一個以游標操作為基礎的硬碟分割程式，" #: disk-utils/cfdisk.c:2177 #, fuzzy #| msgid "allows you to create, delete and modify partitions on your hard" msgid "It lets you create, delete, and modify partitions on a block device." msgstr "可供您新增、刪除和修改硬碟中的分割區" #: disk-utils/cfdisk.c:2179 msgid "Command Meaning" msgstr "按鍵命令 意義" #: disk-utils/cfdisk.c:2180 msgid "------- -------" msgstr "------- -------" #: disk-utils/cfdisk.c:2181 msgid " b Toggle bootable flag of the current partition" msgstr " b 切換目前分割區的開機屬性旗標" #: disk-utils/cfdisk.c:2182 msgid " d Delete the current partition" msgstr " d 刪除目前的分割區" #: disk-utils/cfdisk.c:2183 msgid " h Print this screen" msgstr " h 顯示本說明畫面" #: disk-utils/cfdisk.c:2184 msgid " n Create new partition from free space" msgstr " n 由剩餘空間中新增一塊分割區" #: disk-utils/cfdisk.c:2185 msgid " q Quit program without writing partition table" msgstr " q 離開本程式並且不寫入分割表" #: disk-utils/cfdisk.c:2186 msgid " s Fix partitions order (only when in disarray)" msgstr "" #: disk-utils/cfdisk.c:2187 #, fuzzy #| msgid " t Change the filesystem type" msgid " t Change the partition type" msgstr " t 變更檔案系統的類型" #: disk-utils/cfdisk.c:2188 msgid " u Dump disk layout to sfdisk compatible script file" msgstr "" #: disk-utils/cfdisk.c:2189 #, fuzzy #| msgid " W Write partition table to disk (must enter upper case W)" msgid " W Write partition table to disk (you must enter uppercase W);" msgstr " W 寫入分割表 (寫入一定要用大寫 W)" #: disk-utils/cfdisk.c:2190 #, fuzzy #| msgid " Since this might destroy data on the disk, you must" msgid " since this might destroy data on the disk, you must either" msgstr " 因為這將會使您的硬碟中的資料消失，您必須" #: disk-utils/cfdisk.c:2191 #, fuzzy #| msgid " either confirm or deny the write by entering `yes' or" msgid " confirm or deny the write by entering 'yes' or 'no'" msgstr " 明確地回答 'yes' 代表寫入，若不要寫入請回答" #: disk-utils/cfdisk.c:2192 #, fuzzy #| msgid " There are several different formats for the partition" msgid " x Display/hide extra information about a partition" msgstr " 這裡有不同的分割區格式" #: disk-utils/cfdisk.c:2193 msgid "Up Arrow Move cursor to the previous partition" msgstr "向上鍵 移動往上鍵可移至上一個分割區" #: disk-utils/cfdisk.c:2194 msgid "Down Arrow Move cursor to the next partition" msgstr "向下鍵 移動往下鍵可移至下一個分割區" #: disk-utils/cfdisk.c:2195 #, fuzzy #| msgid "Up Arrow Move cursor to the previous partition" msgid "Left Arrow Move cursor to the previous menu item" msgstr "向上鍵 移動往上鍵可移至上一個分割區" #: disk-utils/cfdisk.c:2196 #, fuzzy #| msgid "Down Arrow Move cursor to the next partition" msgid "Right Arrow Move cursor to the next menu item" msgstr "向下鍵 移動往下鍵可移至下一個分割區" #: disk-utils/cfdisk.c:2198 msgid "Note: All of the commands can be entered with either upper or lower" msgstr "注意: 以上所有的按鍵命令均不區分大小寫" #: disk-utils/cfdisk.c:2199 #, fuzzy #| msgid "case letters (except for Writes)." msgid "case letters (except for Write)." msgstr "(除了 '寫入' 之外)。" #: disk-utils/cfdisk.c:2201 msgid "Use lsblk(8) or partx(8) to see more details about the device." msgstr "" #: disk-utils/cfdisk.c:2211 disk-utils/cfdisk.c:2514 #, fuzzy #| msgid "Press a key to continue" msgid "Press a key to continue." msgstr "按任何鍵繼續" #: disk-utils/cfdisk.c:2297 msgid "Could not toggle the flag." msgstr "" #: disk-utils/cfdisk.c:2307 #, fuzzy, c-format msgid "Could not delete partition %zu." msgstr "已選分割區 %d\n" #: disk-utils/cfdisk.c:2309 disk-utils/fdisk-menu.c:658 #, fuzzy, c-format msgid "Partition %zu has been deleted." msgstr "分割 %d 被刪除\n" #: disk-utils/cfdisk.c:2330 #, fuzzy #| msgid "Partition (a-%c): " msgid "Partition size: " msgstr "分割區 (a-%c)：" #: disk-utils/cfdisk.c:2371 #, fuzzy, c-format msgid "Changed type of partition %zu." msgstr "分割區 %d 的系統類型已變更為 %x (%s)\n" #: disk-utils/cfdisk.c:2373 #, fuzzy, c-format msgid "The type of partition %zu is unchanged." msgstr "分割區 %d 的系統類型未被變更：%x (%s)\n" #: disk-utils/cfdisk.c:2394 #, fuzzy msgid "New size: " msgstr "新 %s 限制：" #: disk-utils/cfdisk.c:2409 #, fuzzy, c-format msgid "Partition %zu resized." msgstr "%s：分割 #%d 移除\n" #: disk-utils/cfdisk.c:2427 disk-utils/cfdisk.c:2543 disk-utils/fdisk.c:1063 #: disk-utils/fdisk-menu.c:591 msgid "Device is open in read-only mode." msgstr "" #: disk-utils/cfdisk.c:2432 #, fuzzy #| msgid "Are you sure you want to write the partition table to disk? (yes or no): " msgid "Are you sure you want to write the partition table to disk? " msgstr "您確定要將分割表寫入硬碟中嗎? (yes 或 no):" #: disk-utils/cfdisk.c:2434 msgid "Type \"yes\" or \"no\", or press ESC to leave this dialog." msgstr "" #: disk-utils/cfdisk.c:2439 login-utils/lslogins.c:209 sys-utils/lscpu.c:1436 #: sys-utils/lscpu.c:1446 sys-utils/lsmem.c:268 msgid "yes" msgstr "是" #: disk-utils/cfdisk.c:2440 #, fuzzy #| msgid "Did not write partition table to disk" msgid "Did not write partition table to disk." msgstr "不要將分割表寫入硬碟" #: disk-utils/cfdisk.c:2445 #, fuzzy #| msgid "%s: failed to write label" msgid "Failed to write disklabel." msgstr "%s：無法寫入標籤" #: disk-utils/cfdisk.c:2451 disk-utils/fdisk-menu.c:599 #, fuzzy #| msgid "" #| "The partition table has been altered!\n" #| "\n" msgid "The partition table has been altered." msgstr "" "分割表已變更！\n" "\n" #: disk-utils/cfdisk.c:2474 disk-utils/cfdisk.c:2545 #, fuzzy #| msgid "" #| "\n" #| "Partition table entries are not in disk order\n" msgid "Note that partition table entries are not in disk order now." msgstr "" "\n" "分割表項目未按磁碟排序\n" #: disk-utils/cfdisk.c:2511 #, c-format msgid "Device already contains a %s signature; it will be removed by a write command." msgstr "" #: disk-utils/cfdisk.c:2522 #, fuzzy msgid "failed to create a new disklabel" msgstr "建立新的清空 Sun disklabel" #: disk-utils/cfdisk.c:2530 #, fuzzy msgid "failed to read partitions" msgstr "加入分割時失敗" #: disk-utils/cfdisk.c:2629 #, fuzzy, c-format msgid " %1$s [options] \n" msgstr " %s [選項] \n" #: disk-utils/cfdisk.c:2632 disk-utils/fdisk.c:808 disk-utils/sfdisk.c:1843 #, fuzzy msgid "Display or manipulate a disk partition table.\n" msgstr "%s：無法讀取分割表" #: disk-utils/cfdisk.c:2635 msgid " -L, --color[=] colorize output (auto, always or never)\n" msgstr "" #: disk-utils/cfdisk.c:2638 #, fuzzy msgid " -z, --zero start with zeroed partition table\n" msgstr " -Q, --queue 建立訊息佇列\n" #: disk-utils/cfdisk.c:2676 disk-utils/fdisk.c:950 disk-utils/sfdisk.c:2120 #: misc-utils/cal.c:429 sys-utils/dmesg.c:1410 text-utils/hexdump.c:114 #, fuzzy msgid "unsupported color mode" msgstr "不受支援的命令" #: disk-utils/cfdisk.c:2696 disk-utils/fdisk.c:888 disk-utils/sfdisk.c:224 #, fuzzy msgid "failed to allocate libfdisk context" msgstr "配置迭代器時失敗" #: disk-utils/delpart.c:15 #, fuzzy, c-format msgid " %s \n" msgstr " %s <分割區編號>\n" #: disk-utils/delpart.c:19 msgid "Tell the kernel to forget about a specified partition.\n" msgstr "" #: disk-utils/delpart.c:63 #, fuzzy msgid "failed to remove partition" msgstr "移除分割時失敗" #: disk-utils/fdformat.c:53 #, c-format msgid "Formatting ... " msgstr "格式化中…" #: disk-utils/fdformat.c:68 disk-utils/fdformat.c:138 #, c-format msgid "done\n" msgstr "已完成\n" #: disk-utils/fdformat.c:80 #, c-format msgid "Verifying ... " msgstr "驗證中…" #: disk-utils/fdformat.c:108 msgid "Read: " msgstr "讀取：" #: disk-utils/fdformat.c:110 #, fuzzy, c-format #| msgid "Problem reading cylinder %d, expected %d, read %d\n" msgid "Problem reading track/head %u/%u, expected %d, read %d\n" msgstr "問題發生在讀取第 %d 個磁柱時，預計資料為 %d，實際讀取資料為 %d\n" #: disk-utils/fdformat.c:127 #, fuzzy, c-format #| msgid "" #| "bad data in cyl %d\n" #| "Continuing ... " msgid "" "bad data in track/head %u/%u\n" "Continuing ... " msgstr "" "第 %d 個磁柱有壞資料。\n" "繼續進行..." #: disk-utils/fdformat.c:145 disk-utils/fsck.minix.c:183 #: disk-utils/swaplabel.c:123 misc-utils/wipefs.c:602 #: sys-utils/blkdiscard.c:85 sys-utils/tunelp.c:95 #, fuzzy, c-format msgid " %s [options] \n" msgstr " %s [選項] \n" #: disk-utils/fdformat.c:149 msgid "Do a low-level formatting of a floppy disk.\n" msgstr "" #: disk-utils/fdformat.c:152 #, fuzzy msgid " -f, --from start at the track N (default 0)\n" msgstr " -a, --all 所有 (預設)\n" #: disk-utils/fdformat.c:153 #, fuzzy msgid " -t, --to stop at the track N\n" msgstr " -2, --twostopbits 設定停止位元到兩\n" #: disk-utils/fdformat.c:154 msgid "" " -r, --repair try to repair tracks failed during\n" " the verification (max N retries)\n" msgstr "" #: disk-utils/fdformat.c:156 msgid " -n, --no-verify disable the verification after the format\n" msgstr "" #: disk-utils/fdformat.c:194 #, fuzzy msgid "invalid argument - from" msgstr "無效的引數：%s" #: disk-utils/fdformat.c:198 #, fuzzy msgid "invalid argument - to" msgstr "無效的引數：%s" #: disk-utils/fdformat.c:201 #, fuzzy msgid "invalid argument - repair" msgstr "無效的引數：%s" #: disk-utils/fdformat.c:223 disk-utils/fsck.cramfs.c:148 #: disk-utils/mkfs.bfs.c:188 disk-utils/mkfs.cramfs.c:337 #: disk-utils/mkfs.cramfs.c:758 disk-utils/mkfs.cramfs.c:797 #: disk-utils/mkfs.minix.c:821 disk-utils/mkswap.c:243 disk-utils/partx.c:951 #: login-utils/last.c:688 login-utils/utmpdump.c:137 misc-utils/namei.c:135 #: misc-utils/rename.c:63 sys-utils/blkdiscard.c:185 sys-utils/blkzone.c:99 #: sys-utils/dmesg.c:526 sys-utils/fallocate.c:197 sys-utils/fsfreeze.c:120 #: sys-utils/fstrim.c:76 sys-utils/nsenter.c:164 sys-utils/nsenter.c:168 #: sys-utils/swapon.c:523 sys-utils/switch_root.c:94 #: sys-utils/switch_root.c:137 term-utils/mesg.c:129 text-utils/more.c:525 #, fuzzy, c-format #| msgid "lstat of path failed\n" msgid "stat of %s failed" msgstr "路徑 lstat 時失敗\n" #: disk-utils/fdformat.c:226 disk-utils/partx.c:1010 misc-utils/lsblk.c:1501 #: sys-utils/blkdiscard.c:187 sys-utils/blkzone.c:101 #: sys-utils/mountpoint.c:107 #, fuzzy, c-format msgid "%s: not a block device" msgstr "%s：不是區塊裝置" #: disk-utils/fdformat.c:231 #, fuzzy #| msgid "Could not determine current format type" msgid "could not determine current format type" msgstr "無法決定目前的格式類型" #: disk-utils/fdformat.c:233 #, c-format msgid "%s-sided, %d tracks, %d sec/track. Total capacity %d kB.\n" msgstr "%s面、%d 磁軌、%d 磁區/磁軌。總容量 %d kB。\n" #: disk-utils/fdformat.c:234 msgid "Double" msgstr "雙" #: disk-utils/fdformat.c:234 msgid "Single" msgstr "單" #: disk-utils/fdformat.c:241 msgid "user defined start track exceeds the medium specific maximum" msgstr "" #: disk-utils/fdformat.c:243 msgid "user defined end track exceeds the medium specific maximum" msgstr "" #: disk-utils/fdformat.c:245 msgid "user defined start track exceeds the user defined end track" msgstr "" #: disk-utils/fdformat.c:253 misc-utils/logger.c:1022 #, fuzzy #| msgid "seek failed" msgid "close failed" msgstr "搜尋失敗" #: disk-utils/fdisk.c:204 #, fuzzy, c-format msgid "Select (default %c): " msgstr "%s (%u-%u, 預設 %u)：" #: disk-utils/fdisk.c:209 #, fuzzy, c-format msgid "Using default response %c." msgstr "使用預設回應 %c\n" #: disk-utils/fdisk.c:222 disk-utils/fdisk.c:296 disk-utils/fdisk.c:371 #: libfdisk/src/dos.c:1241 libfdisk/src/gpt.c:2469 #, fuzzy #| msgid "Value out of range.\n" msgid "Value out of range." msgstr "數值超出範圍。\n" #: disk-utils/fdisk.c:251 #, fuzzy, c-format msgid "%s (%s, default %c): " msgstr "%s (%u-%u, 預設 %u)：" #: disk-utils/fdisk.c:254 disk-utils/fdisk.c:321 #, fuzzy, c-format msgid "%s (%s, default %): " msgstr "%s (%u-%u, 預設 %u)：" #: disk-utils/fdisk.c:259 #, fuzzy, c-format #| msgid "%s (%u-%u, default %u): " msgid "%s (%c-%c, default %c): " msgstr "%s (%u-%u, 預設 %u)：" #: disk-utils/fdisk.c:263 disk-utils/fdisk.c:325 #, fuzzy, c-format #| msgid "%s (%u-%u, default %u): " msgid "%s (%-%, default %): " msgstr "%s (%u-%u, 預設 %u)：" #: disk-utils/fdisk.c:266 #, fuzzy, c-format #| msgid "%s (%s)\n" msgid "%s (%c-%c): " msgstr "%s (%s)\n" #: disk-utils/fdisk.c:269 disk-utils/fdisk.c:328 #, c-format msgid "%s (%-%): " msgstr "" #: disk-utils/fdisk.c:438 disk-utils/sfdisk.c:198 msgid " [Y]es/[N]o: " msgstr "" #: disk-utils/fdisk.c:479 #, fuzzy msgid "Hex code (type L to list all codes): " msgstr "十六進位編碼 (輸入 L 以列出編碼)：" #: disk-utils/fdisk.c:480 #, fuzzy msgid "Partition type (type L to list all types): " msgstr "十六進位編碼 (輸入 L 以列出編碼)：" #: disk-utils/fdisk.c:582 #, fuzzy #| msgid "DOS Compatibility flag is set (DEPRECATED!)\n" msgid "DOS Compatibility flag is set (DEPRECATED!)" msgstr "DOS 相容性旗標已設定 (不宜再用！)\n" #: disk-utils/fdisk.c:583 #, fuzzy #| msgid "DOS Compatibility flag is not set\n" msgid "DOS Compatibility flag is not set" msgstr "DOS 相容性旗標未設定\n" #: disk-utils/fdisk.c:604 disk-utils/fdisk.c:640 #, fuzzy, c-format msgid "Partition %zu does not exist yet!" msgstr "分割區 %d 尚不存在！\n" #: disk-utils/fdisk.c:609 disk-utils/fdisk.c:618 libfdisk/src/ask.c:1003 msgid "Unknown" msgstr "未知" #: disk-utils/fdisk.c:617 #, fuzzy, c-format msgid "Changed type of partition '%s' to '%s'." msgstr "分割區 %d 的系統類型已變更為 %x (%s)\n" #: disk-utils/fdisk.c:621 #, fuzzy, c-format msgid "Type of partition %zu is unchanged: %s." msgstr "分割區 %d 的系統類型未被變更：%x (%s)\n" #: disk-utils/fdisk.c:660 #, fuzzy, c-format #| msgid "%s: %s (%s)\n" msgid "%15s: %s" msgstr "%s: %s (%s)\n" #: disk-utils/fdisk.c:717 #, c-format msgid "" "\n" "%s: offset = %, size = %zu bytes." msgstr "" #: disk-utils/fdisk.c:723 #, fuzzy #| msgid "cannot fork" msgid "cannot seek" msgstr "無法衍生執行" #: disk-utils/fdisk.c:728 #, fuzzy msgid "cannot read" msgstr "無法讀取 %s" #: disk-utils/fdisk.c:741 libfdisk/src/bsd.c:258 libfdisk/src/dos.c:982 #: libfdisk/src/gpt.c:2398 #, fuzzy msgid "First sector" msgstr "起初 %s" #: disk-utils/fdisk.c:768 #, fuzzy, c-format msgid "BLKGETSIZE ioctl failed on %s" msgstr "BLKGETSIZE ioctl 失敗的於 %s" #: disk-utils/fdisk.c:786 disk-utils/sfdisk.c:1474 #, c-format msgid "The old %s signature will be removed by a write command." msgstr "" #: disk-utils/fdisk.c:790 #, c-format msgid "The old %s signature may remain on the device. It is recommended to wipe the device with wipefs(8) or fdisk --wipe, in order to avoid possible collisions." msgstr "" #: disk-utils/fdisk.c:803 #, c-format msgid "" " %1$s [options] change partition table\n" " %1$s [options] -l [] list partition table(s)\n" msgstr "" #: disk-utils/fdisk.c:811 #, fuzzy msgid " -b, --sector-size physical and logical sector size\n" msgstr " -c, --creator 顯示建立者和擁有者\n" #: disk-utils/fdisk.c:812 msgid " -B, --protect-boot don't erase bootbits when creating a new label\n" msgstr "" #: disk-utils/fdisk.c:813 msgid " -c, --compatibility[=] mode is 'dos' or 'nondos' (default)\n" msgstr "" #: disk-utils/fdisk.c:814 msgid " -L, --color[=] colorize output (auto, always or never)\n" msgstr "" #: disk-utils/fdisk.c:817 #, fuzzy msgid " -l, --list display partitions and exit\n" msgstr " -h 顯示這份說明然後離開\n" #: disk-utils/fdisk.c:818 #, fuzzy msgid " -o, --output output columns\n" msgstr " -o, --options 短選項為辨識的\n" #: disk-utils/fdisk.c:819 #, fuzzy msgid " -t, --type recognize specified partition table type only\n" msgstr " -n, --noparity 設定同位到無\n" #: disk-utils/fdisk.c:820 msgid " -u, --units[=] display units: 'cylinders' or 'sectors' (default)\n" msgstr "" #: disk-utils/fdisk.c:821 #, fuzzy msgid " -s, --getsz display device size in 512-byte sectors [DEPRECATED]\n" msgstr " -G, --get-glush 顯示預設清理逾時值\n" #: disk-utils/fdisk.c:822 msgid " --bytes print SIZE in bytes rather than in human readable format\n" msgstr "" #: disk-utils/fdisk.c:823 #, fuzzy msgid " -w, --wipe wipe signatures (auto, always or never)\n" msgstr " -w, --wait strobe 等待在中 micro 秒\n" #: disk-utils/fdisk.c:824 disk-utils/sfdisk.c:1886 msgid " -W, --wipe-partitions wipe signatures from new partitions (auto, always or never)\n" msgstr "" #: disk-utils/fdisk.c:827 #, fuzzy #| msgid " -C# [or --cylinders #]:set the number of cylinders to use" msgid " -C, --cylinders specify the number of cylinders\n" msgstr " -C# [或 --cylinders #]：設定要用的磁柱數量" #: disk-utils/fdisk.c:828 #, fuzzy #| msgid " -H# [or --heads #]: set the number of heads to use" msgid " -H, --heads specify the number of heads\n" msgstr " -H# [或 --heads #]： 設定要用的磁頭數量" #: disk-utils/fdisk.c:829 #, fuzzy #| msgid " -S# [or --sectors #]: set the number of sectors to use" msgid " -S, --sectors specify the number of sectors per track\n" msgstr " -S# [或 --sectors #]： 設定要用的磁區數量" #: disk-utils/fdisk.c:898 disk-utils/fdisk.c:900 disk-utils/partx.c:873 #, fuzzy msgid "invalid sector size argument" msgstr "無效的磁區大小引數" #: disk-utils/fdisk.c:910 #, fuzzy msgid "invalid cylinders argument" msgstr "無效的磁柱引數" #: disk-utils/fdisk.c:922 #, fuzzy msgid "not found DOS label driver" msgstr "找不到未使用的裝置" #: disk-utils/fdisk.c:928 #, fuzzy, c-format msgid "unknown compatibility mode '%s'" msgstr "不明機能『%s』" #: disk-utils/fdisk.c:935 #, fuzzy msgid "invalid heads argument" msgstr "無效的前端引數" #: disk-utils/fdisk.c:941 #, fuzzy msgid "invalid sectors argument" msgstr "無效的磁區引數" #: disk-utils/fdisk.c:967 #, fuzzy, c-format msgid "unsupported disklabel: %s" msgstr "不受支援的引數：%s" #: disk-utils/fdisk.c:975 #, fuzzy msgid "unsupported unit" msgstr "不受支援的引數：%s" #: disk-utils/fdisk.c:984 disk-utils/fdisk.c:989 disk-utils/sfdisk.c:2084 #: disk-utils/sfdisk.c:2089 #, fuzzy msgid "unsupported wipe mode" msgstr "不受支援的命令" #: disk-utils/fdisk.c:1002 #, fuzzy #| msgid "Warning: the -b (set sector size) option should be used with one specified device\n" msgid "The device properties (sector size and geometry) should be used with one specified device only." msgstr "警告：-b (設定磁區大小) 選項應該與一個指定裝置共同使用\n" #: disk-utils/fdisk.c:1033 disk-utils/fdisk.c:1048 #: disk-utils/fsck.cramfs.c:695 disk-utils/mkfs.bfs.c:198 #: disk-utils/mkfs.cramfs.c:787 disk-utils/partx.c:967 disk-utils/raw.c:137 #: disk-utils/raw.c:150 disk-utils/raw.c:162 disk-utils/raw.c:203 #: misc-utils/cal.c:520 misc-utils/findfs.c:58 misc-utils/look.c:150 #: misc-utils/whereis.c:573 misc-utils/whereis.c:584 misc-utils/whereis.c:595 #: misc-utils/whereis.c:637 schedutils/chrt.c:504 schedutils/ionice.c:262 #: schedutils/taskset.c:189 sys-utils/chcpu.c:344 sys-utils/chmem.c:419 #: sys-utils/dmesg.c:1469 sys-utils/ipcmk.c:135 sys-utils/ldattach.c:321 #: sys-utils/losetup.c:888 sys-utils/lscpu.c:2025 sys-utils/lsmem.c:630 #: sys-utils/mount.c:698 sys-utils/mount.c:711 sys-utils/mount.c:780 #: sys-utils/mountpoint.c:181 sys-utils/pivot_root.c:72 #: sys-utils/swapoff.c:230 sys-utils/swapon.c:988 sys-utils/switch_root.c:250 #: sys-utils/umount.c:528 term-utils/setterm.c:1176 text-utils/col.c:233 #: text-utils/more.c:337 #, fuzzy msgid "bad usage" msgstr "不當的值" #: disk-utils/fdisk.c:1054 #, c-format msgid "Welcome to fdisk (%s)." msgstr "" #: disk-utils/fdisk.c:1056 disk-utils/sfdisk.c:1616 #, fuzzy msgid "" "Changes will remain in memory only, until you decide to write them.\n" "Be careful before using the write command.\n" msgstr "" "歡迎使用 fdisk (%s)。\n" "\n" "變更將剩下在中記憶體只有，直到您決定到寫入它們。\n" "請小心之前使用寫入命令。\n" "\n" #: disk-utils/fdisk.c:1079 msgid "A hybrid GPT was detected. You have to sync the hybrid MBR manually (expert command 'M')." msgstr "" #: disk-utils/fdisk-list.c:43 #, fuzzy, c-format msgid "Disklabel type: %s" msgstr "硬碟: %s\n" #: disk-utils/fdisk-list.c:47 #, fuzzy, c-format #| msgid "Disk identifier: 0x%08x\n" msgid "Disk identifier: %s" msgstr "磁碟識別碼：0x%08x\n" #: disk-utils/fdisk-list.c:60 #, fuzzy, c-format #| msgid "" #| "\n" #| "Disk %s: %lu cylinders, %lu heads, %lu sectors/track\n" msgid "Disk %s: %s, %ju bytes, %ju sectors" msgstr "" "\n" "磁碟 %s: %lu 磁柱，%lu 磁頭，%lu 磁區/磁軌\n" #: disk-utils/fdisk-list.c:67 #, fuzzy, c-format msgid "Geometry: %d heads, %llu sectors/track, %llu cylinders" msgstr "%d 前端，%llu 磁區/軌段，%llu 磁柱\n" #: disk-utils/fdisk-list.c:72 disk-utils/fdisk-list.c:293 #, fuzzy, c-format msgid "Units: %s of %d * %ld = %ld bytes" msgstr "單位=%s 的 %d * %ld=%ld 位元組\n" #: disk-utils/fdisk-list.c:78 disk-utils/fdisk-list.c:299 #, fuzzy, c-format msgid "Sector size (logical/physical): %lu bytes / %lu bytes" msgstr "磁區大小 (邏輯的/實體)：%lu 位元組/%lu 位元組\n" #: disk-utils/fdisk-list.c:81 #, fuzzy, c-format #| msgid "I/O size (minimum/optimal): %lu bytes / %lu bytes\n" msgid "I/O size (minimum/optimal): %lu bytes / %lu bytes" msgstr "I/O 大小 (最小/最佳化)：%lu 位元組 / %lu 位元組\n" #: disk-utils/fdisk-list.c:85 #, fuzzy, c-format #| msgid "Alignment offset: %lu bytes\n" msgid "Alignment offset: %lu bytes" msgstr "對齊偏移值：%lu 位元組\n" #: disk-utils/fdisk-list.c:116 disk-utils/fdisk-list.c:236 #: disk-utils/fsck.c:1255 #, fuzzy msgid "failed to allocate iterator" msgstr "配置迭代器時失敗" #: disk-utils/fdisk-list.c:122 disk-utils/fdisk-list.c:242 #: disk-utils/partx.c:667 login-utils/lslogins.c:916 misc-utils/fincore.c:361 #: misc-utils/findmnt.c:1596 misc-utils/lsblk.c:1908 misc-utils/lslocks.c:449 #: misc-utils/uuidparse.c:252 misc-utils/wipefs.c:151 sys-utils/losetup.c:321 #: sys-utils/lscpu.c:1609 sys-utils/lscpu.c:1712 sys-utils/lsipc.c:338 #: sys-utils/prlimit.c:297 sys-utils/rfkill.c:457 sys-utils/swapon.c:284 #: sys-utils/wdctl.c:260 sys-utils/zramctl.c:487 text-utils/column.c:209 #, fuzzy #| msgid "failed to initialize output table" msgid "failed to allocate output table" msgstr "初始化輸出表格時失敗" #: disk-utils/fdisk-list.c:163 disk-utils/fdisk-list.c:266 #: disk-utils/partx.c:581 login-utils/lslogins.c:974 misc-utils/fincore.c:123 #: misc-utils/findmnt.c:688 misc-utils/findmnt.c:706 misc-utils/lsblk.c:1176 #: misc-utils/lslocks.c:391 misc-utils/uuidparse.c:154 misc-utils/wipefs.c:210 #: sys-utils/losetup.c:340 sys-utils/losetup.c:369 sys-utils/lscpu.c:1635 #: sys-utils/lscpu.c:1663 sys-utils/lsipc.c:470 sys-utils/lsipc.c:545 #: sys-utils/lsipc.c:647 sys-utils/lsipc.c:739 sys-utils/lsipc.c:900 #: sys-utils/prlimit.c:229 sys-utils/rfkill.c:374 sys-utils/swapon.c:179 #: sys-utils/wdctl.c:214 sys-utils/zramctl.c:407 text-utils/column.c:453 #, fuzzy #| msgid "failed to callocate cpu set" msgid "failed to allocate output line" msgstr "callocate cpu 集合時失敗" #: disk-utils/fdisk-list.c:173 disk-utils/fdisk-list.c:273 #: disk-utils/partx.c:644 login-utils/lslogins.c:1072 misc-utils/fincore.c:159 #: misc-utils/findmnt.c:692 misc-utils/findmnt.c:711 misc-utils/lsblk.c:1167 #: misc-utils/lslocks.c:436 misc-utils/uuidparse.c:239 misc-utils/wipefs.c:250 #: sys-utils/losetup.c:301 sys-utils/lscpu.c:1643 sys-utils/lscpu.c:1674 #: sys-utils/lsipc.c:504 sys-utils/lsipc.c:629 sys-utils/prlimit.c:261 #: sys-utils/rfkill.c:402 sys-utils/swapon.c:227 sys-utils/wdctl.c:242 #: sys-utils/zramctl.c:472 text-utils/column.c:460 #, fuzzy #| msgid "failed to add line to output" msgid "failed to add output data" msgstr "加入輸出列時失敗" #: disk-utils/fdisk-list.c:193 #, fuzzy, c-format #| msgid "Partition %i does not start on physical sector boundary.\n" msgid "Partition %zu does not start on physical sector boundary." msgstr "分割區 %i 並非開始於磁柱邊界。\n" #: disk-utils/fdisk-list.c:200 #, c-format msgid "Filesystem/RAID signature on partition %zu will be wiped." msgstr "" #: disk-utils/fdisk-list.c:209 #, fuzzy #| msgid "" #| "\n" #| "Partition table entries are not in disk order\n" msgid "Partition table entries are not in disk order." msgstr "" "\n" "分割表項目未按磁碟排序\n" #: disk-utils/fdisk-list.c:228 libfdisk/src/bsd.c:1017 libfdisk/src/dos.c:2425 #: libfdisk/src/gpt.c:3128 libfdisk/src/sgi.c:1153 libfdisk/src/sun.c:1120 #, fuzzy #| msgid "start" msgid "Start" msgstr "啟始" #: disk-utils/fdisk-list.c:228 libfdisk/src/bsd.c:1018 libfdisk/src/dos.c:2426 #: libfdisk/src/gpt.c:3129 libfdisk/src/sgi.c:1154 libfdisk/src/sun.c:1121 msgid "End" msgstr "結束" #: disk-utils/fdisk-list.c:228 libfdisk/src/bsd.c:1019 libfdisk/src/dos.c:2427 #: libfdisk/src/gpt.c:3130 libfdisk/src/sgi.c:1155 libfdisk/src/sun.c:1122 msgid "Sectors" msgstr "磁區" #: disk-utils/fdisk-list.c:228 libfdisk/src/bsd.c:1021 libfdisk/src/dos.c:2429 #: libfdisk/src/gpt.c:3131 libfdisk/src/sgi.c:1157 libfdisk/src/sun.c:1124 msgid "Size" msgstr "" #: disk-utils/fdisk-list.c:287 #, c-format msgid "Unpartitioned space %s: %s, %ju bytes, %ju sectors" msgstr "" #: disk-utils/fdisk-list.c:473 #, fuzzy, c-format #| msgid "unknown column: %s" msgid "%s unknown column: %s" msgstr "不明直欄：%s" #: disk-utils/fdisk-menu.c:97 msgid "Generic" msgstr "" #: disk-utils/fdisk-menu.c:98 #, fuzzy msgid "delete a partition" msgstr "刪除分割" #: disk-utils/fdisk-menu.c:99 #, fuzzy msgid "list free unpartitioned space" msgstr "清單進階分割區" #: disk-utils/fdisk-menu.c:100 #, fuzzy msgid "list known partition types" msgstr "清單已知分割區類型" #: disk-utils/fdisk-menu.c:101 #, fuzzy msgid "add a new partition" msgstr "加入新的分割" #: disk-utils/fdisk-menu.c:102 #, fuzzy msgid "print the partition table" msgstr "列印分割表" #: disk-utils/fdisk-menu.c:103 #, fuzzy msgid "change a partition type" msgstr "變更分割系統識別號" #: disk-utils/fdisk-menu.c:104 #, fuzzy msgid "verify the partition table" msgstr "驗證分割表" #: disk-utils/fdisk-menu.c:105 #, fuzzy msgid "print information about a partition" msgstr "%s：分割表不具任何分割區" #: disk-utils/fdisk-menu.c:107 #, fuzzy msgid "print the raw data of the first sector from the device" msgstr "列印未經處理資料在中分割表" #: disk-utils/fdisk-menu.c:108 #, fuzzy msgid "print the raw data of the disklabel from the device" msgstr "列印未經處理資料在中分割表" #: disk-utils/fdisk-menu.c:109 #, fuzzy msgid "fix partitions order" msgstr "修正分割排序" #: disk-utils/fdisk-menu.c:111 msgid "Misc" msgstr "" #: disk-utils/fdisk-menu.c:112 #, fuzzy msgid "print this menu" msgstr "印出這份選單" #: disk-utils/fdisk-menu.c:113 #, fuzzy msgid "change display/entry units" msgstr "變更顯示/條目單位" #: disk-utils/fdisk-menu.c:114 #, fuzzy msgid "extra functionality (experts only)" msgstr "額外功能性 (專家限用)" #: disk-utils/fdisk-menu.c:116 msgid "Script" msgstr "" #: disk-utils/fdisk-menu.c:117 msgid "load disk layout from sfdisk script file" msgstr "" #: disk-utils/fdisk-menu.c:118 msgid "dump disk layout to sfdisk script file" msgstr "" #: disk-utils/fdisk-menu.c:120 msgid "Save & Exit" msgstr "" #: disk-utils/fdisk-menu.c:121 #, fuzzy msgid "write table to disk and exit" msgstr "寫入表格到磁碟然後離開" #: disk-utils/fdisk-menu.c:122 #, fuzzy msgid "write table to disk" msgstr "寫入 disklabel 到磁碟" #: disk-utils/fdisk-menu.c:123 #, fuzzy msgid "quit without saving changes" msgstr "離開但不儲存變更" #: disk-utils/fdisk-menu.c:124 #, fuzzy msgid "return to main menu" msgstr "回傳到主選單" #: disk-utils/fdisk-menu.c:126 msgid "return from BSD to DOS" msgstr "" #: disk-utils/fdisk-menu.c:137 #, fuzzy msgid "Create a new label" msgstr "建立新的清空 Sun disklabel" #: disk-utils/fdisk-menu.c:138 #, fuzzy msgid "create a new empty GPT partition table" msgstr "建立新的清空 DOS 分割表" #: disk-utils/fdisk-menu.c:139 #, fuzzy msgid "create a new empty SGI (IRIX) partition table" msgstr "建立新的清空 DOS 分割表" #: disk-utils/fdisk-menu.c:140 #, fuzzy msgid "create a new empty DOS partition table" msgstr "建立新的清空 DOS 分割表" #: disk-utils/fdisk-menu.c:141 #, fuzzy msgid "create a new empty Sun partition table" msgstr "建立新的清空 DOS 分割表" #: disk-utils/fdisk-menu.c:145 #, fuzzy msgid "create an IRIX (SGI) partition table" msgstr "建立 IRIX (SGI) 分割表" #: disk-utils/fdisk-menu.c:154 msgid "Geometry (for the current label)" msgstr "" #: disk-utils/fdisk-menu.c:155 #, fuzzy msgid "change number of cylinders" msgstr "變更磁柱數量" #: disk-utils/fdisk-menu.c:156 #, fuzzy msgid "change number of heads" msgstr "變更前端數量" #: disk-utils/fdisk-menu.c:157 #, fuzzy msgid "change number of sectors/track" msgstr "變更磁區數量/軌段" #: disk-utils/fdisk-menu.c:166 include/pt-mbr-partnames.h:95 msgid "GPT" msgstr "GPT" #: disk-utils/fdisk-menu.c:167 #, fuzzy #| msgid "changed" msgid "change disk GUID" msgstr "已變更" #: disk-utils/fdisk-menu.c:168 #, fuzzy msgid "change partition name" msgstr "分割名稱" #: disk-utils/fdisk-menu.c:169 #, fuzzy msgid "change partition UUID" msgstr "分割 UUID" #: disk-utils/fdisk-menu.c:170 #, fuzzy msgid "change table length" msgstr "剖析長度時失敗" #: disk-utils/fdisk-menu.c:171 msgid "enter protective/hybrid MBR" msgstr "" #: disk-utils/fdisk-menu.c:174 #, fuzzy msgid "toggle the legacy BIOS bootable flag" msgstr "切換可開機的旗標" #: disk-utils/fdisk-menu.c:175 #, fuzzy msgid "toggle the no block IO protocol flag" msgstr "切換 DOS 相容性旗標" #: disk-utils/fdisk-menu.c:176 #, fuzzy msgid "toggle the required partition flag" msgstr "切換 DOS 相容性旗標" #: disk-utils/fdisk-menu.c:177 msgid "toggle the GUID specific bits" msgstr "" #: disk-utils/fdisk-menu.c:187 msgid "Sun" msgstr "" #: disk-utils/fdisk-menu.c:188 #, fuzzy msgid "toggle the read-only flag" msgstr "切換唯讀旗標" #: disk-utils/fdisk-menu.c:189 #, fuzzy msgid "toggle the mountable flag" msgstr "切換 mountable 旗標" #: disk-utils/fdisk-menu.c:191 #, fuzzy msgid "change number of alternate cylinders" msgstr "變更交替磁柱數量" #: disk-utils/fdisk-menu.c:192 #, fuzzy msgid "change number of extra sectors per cylinder" msgstr "變更額外磁區數量各磁柱" #: disk-utils/fdisk-menu.c:193 #, fuzzy msgid "change interleave factor" msgstr "變更交插因子" #: disk-utils/fdisk-menu.c:194 #, fuzzy msgid "change rotation speed (rpm)" msgstr "變更轉速 (rpm)" #: disk-utils/fdisk-menu.c:195 #, fuzzy msgid "change number of physical cylinders" msgstr "變更實體磁柱數量" #: disk-utils/fdisk-menu.c:204 #, fuzzy #| msgid "SGI raw" msgid "SGI" msgstr "SGI raw" #: disk-utils/fdisk-menu.c:205 #, fuzzy msgid "select bootable partition" msgstr "選取可開機的分割" #: disk-utils/fdisk-menu.c:206 #, fuzzy msgid "edit bootfile entry" msgstr "編輯 bootfile 條目" #: disk-utils/fdisk-menu.c:207 #, fuzzy msgid "select sgi swap partition" msgstr "選取 sgi 交換分割區" #: disk-utils/fdisk-menu.c:208 msgid "create SGI info" msgstr "" #: disk-utils/fdisk-menu.c:217 #, fuzzy #| msgid "DOS R/O" msgid "DOS (MBR)" msgstr "DOS R/O" #: disk-utils/fdisk-menu.c:218 #, fuzzy msgid "toggle a bootable flag" msgstr "切換可開機的旗標" #: disk-utils/fdisk-menu.c:219 #, fuzzy msgid "edit nested BSD disklabel" msgstr "編輯 bsd disklabel" #: disk-utils/fdisk-menu.c:220 #, fuzzy msgid "toggle the dos compatibility flag" msgstr "切換 DOS 相容性旗標" #: disk-utils/fdisk-menu.c:222 #, fuzzy msgid "move beginning of data in a partition" msgstr "移動起始部分的資料在中分割" #: disk-utils/fdisk-menu.c:223 #, fuzzy msgid "change the disk identifier" msgstr "變更磁碟識別碼" #: disk-utils/fdisk-menu.c:225 msgid "return from protective/hybrid MBR to GPT" msgstr "" #: disk-utils/fdisk-menu.c:235 #, fuzzy #| msgid "BSD/OS" msgid "BSD" msgstr "BSD/OS" #: disk-utils/fdisk-menu.c:236 #, fuzzy msgid "edit drive data" msgstr "編輯推動資料" #: disk-utils/fdisk-menu.c:237 #, fuzzy msgid "install bootstrap" msgstr "安裝啟動程式" #: disk-utils/fdisk-menu.c:238 #, fuzzy msgid "show complete disklabel" msgstr "顯示完成 disklabel" #: disk-utils/fdisk-menu.c:239 #, fuzzy msgid "link BSD partition to non-BSD partition" msgstr "鏈結 BSD 分割到 non-BSD 分割" #: disk-utils/fdisk-menu.c:371 #, c-format msgid "" "\n" "Help (expert commands):\n" msgstr "" #: disk-utils/fdisk-menu.c:373 disk-utils/sfdisk.c:1283 #, fuzzy, c-format #| msgid "Help" msgid "" "\n" "Help:\n" msgstr "求助" #: disk-utils/fdisk-menu.c:393 #, c-format msgid "You're editing nested '%s' partition table, primary partition table is '%s'." msgstr "" #: disk-utils/fdisk-menu.c:423 msgid "Expert command (m for help): " msgstr "專家命令 (m 以獲得說明)：" #: disk-utils/fdisk-menu.c:425 msgid "Command (m for help): " msgstr "命令 (m 以獲得說明)：" #: disk-utils/fdisk-menu.c:435 #, fuzzy msgid "" "\n" "Do you really want to quit? " msgstr "您真的要離開嗎？" #: disk-utils/fdisk-menu.c:448 #, fuzzy, c-format #| msgid "%c: unknown command\n" msgid "%c: unknown command" msgstr "%c: 不明的命令\n" #: disk-utils/fdisk-menu.c:473 disk-utils/fdisk-menu.c:506 #, fuzzy msgid "Enter script file name" msgstr "無法寫入指令稿檔案" #: disk-utils/fdisk-menu.c:485 msgid "Resetting fdisk!" msgstr "" #: disk-utils/fdisk-menu.c:492 msgid "Script successfully applied." msgstr "" #: disk-utils/fdisk-menu.c:518 msgid "Failed to transform disk layout into script" msgstr "" #: disk-utils/fdisk-menu.c:532 msgid "Script successfully saved." msgstr "" #: disk-utils/fdisk-menu.c:555 disk-utils/sfdisk.c:1504 #, fuzzy, c-format msgid "Partition #%zu contains a %s signature." msgstr "警告：分割區 %d 含有磁區 0\n" #: disk-utils/fdisk-menu.c:558 disk-utils/sfdisk.c:1507 #, fuzzy #| msgid "Do you really want to continue" msgid "Do you want to remove the signature?" msgstr "您真的要繼續嗎？" #: disk-utils/fdisk-menu.c:563 disk-utils/sfdisk.c:1512 msgid "The signature will be removed by a write command." msgstr "" #: disk-utils/fdisk-menu.c:596 #, fuzzy #| msgid "%s: failed to write label" msgid "failed to write disklabel" msgstr "%s：無法寫入標籤" #: disk-utils/fdisk-menu.c:638 #, fuzzy msgid "Failed to fix partitions order." msgstr "修正分割排序" #: disk-utils/fdisk-menu.c:640 #, fuzzy msgid "Partitions order fixed." msgstr "無已定義分割區\n" #: disk-utils/fdisk-menu.c:656 #, fuzzy, c-format msgid "Could not delete partition %zu" msgstr "已選分割區 %d\n" #: disk-utils/fdisk-menu.c:685 #, fuzzy msgid "Changing display/entry units to cylinders (DEPRECATED!)." msgstr "變更顯示/輸入單位為磁柱 (不宜再用！)\n" #: disk-utils/fdisk-menu.c:687 #, fuzzy msgid "Changing display/entry units to sectors." msgstr "變更顯示/輸入單位為磁區\n" #: disk-utils/fdisk-menu.c:697 disk-utils/fdisk-menu.c:868 #, fuzzy msgid "Leaving nested disklabel." msgstr "編輯 bsd disklabel" #: disk-utils/fdisk-menu.c:734 msgid "New maximum entries" msgstr "" #: disk-utils/fdisk-menu.c:745 msgid "Entering protective/hybrid MBR disklabel." msgstr "" #: disk-utils/fdisk-menu.c:761 msgid "New UUID (in 8-4-4-4-12 format)" msgstr "" #: disk-utils/fdisk-menu.c:776 #, fuzzy msgid "New name" msgstr "使用者名稱" #: disk-utils/fdisk-menu.c:839 #, fuzzy msgid "Entering nested BSD disklabel." msgstr "建立新的 Sun disklabel。\n" #: disk-utils/fdisk-menu.c:1037 msgid "Number of cylinders" msgstr "磁柱數量" #: disk-utils/fdisk-menu.c:1044 msgid "Number of heads" msgstr "磁頭數量" #: disk-utils/fdisk-menu.c:1050 msgid "Number of sectors" msgstr "磁區數量" #: disk-utils/fsck.c:213 #, fuzzy, c-format msgid "%s is mounted\n" msgstr "%s 被掛載\n" #: disk-utils/fsck.c:215 #, fuzzy, c-format msgid "%s is not mounted\n" msgstr "%s 未被掛載\n" #: disk-utils/fsck.c:329 disk-utils/fsck.cramfs.c:171 #: disk-utils/fsck.cramfs.c:178 disk-utils/fsck.cramfs.c:234 #: disk-utils/fsck.cramfs.c:255 disk-utils/sfdisk.c:298 libfdisk/src/bsd.c:645 #: lib/path.c:140 lib/path.c:161 lib/path.c:182 lib/path.c:230 #: login-utils/last.c:208 login-utils/last.c:245 login-utils/sulogin.c:655 #: sys-utils/rfkill.c:214 sys-utils/setpriv.c:285 term-utils/setterm.c:723 #: term-utils/setterm.c:780 term-utils/setterm.c:784 term-utils/setterm.c:791 #, fuzzy, c-format msgid "cannot read %s" msgstr "無法讀取 %s" #: disk-utils/fsck.c:331 lib/path.c:163 lib/path.c:184 #, c-format msgid "parse error: %s" msgstr "剖析錯誤：%s" #: disk-utils/fsck.c:358 #, fuzzy, c-format msgid "cannot create directory %s" msgstr "無法變更目錄到 %s" #: disk-utils/fsck.c:371 #, fuzzy, c-format msgid "Locking disk by %s ... " msgstr "鎖定磁碟 %s…" #: disk-utils/fsck.c:382 #, fuzzy, c-format msgid "(waiting) " msgstr "(等待) " #. TRANSLATORS: These are followups to "Locking disk...". #: disk-utils/fsck.c:392 #, fuzzy msgid "succeeded" msgstr "成功" #: disk-utils/fsck.c:392 #, fuzzy msgid "failed" msgstr "失敗" #: disk-utils/fsck.c:410 #, fuzzy, c-format #| msgid "Using %s.\n" msgid "Unlocking %s.\n" msgstr "正在使用 %s。\n" #: disk-utils/fsck.c:442 #, fuzzy, c-format msgid "failed to setup description for %s" msgstr "設定描述用於 %s 時失敗" #: disk-utils/fsck.c:472 misc-utils/findmnt.c:784 misc-utils/lsblk.c:446 #: sys-utils/mount.c:101 sys-utils/swapon-common.c:19 sys-utils/umount.c:49 #, fuzzy, c-format msgid "%s: parse error at line %d -- ignored" msgstr "%s：剖析錯誤於列 %d -- 忽略" #: disk-utils/fsck.c:504 disk-utils/fsck.c:506 #, fuzzy, c-format msgid "%s: failed to parse fstab" msgstr "%s：無法剖析 fstab" #: disk-utils/fsck.c:687 login-utils/login.c:940 login-utils/sulogin.c:1024 #: login-utils/vipw.c:208 sys-utils/flock.c:346 sys-utils/nsenter.c:180 #: sys-utils/swapon.c:320 sys-utils/unshare.c:221 sys-utils/unshare.c:435 #: term-utils/script.c:805 msgid "fork failed" msgstr "衍生執行時失敗" #: disk-utils/fsck.c:694 #, fuzzy, c-format msgid "%s: execute failed" msgstr "%s：執行失敗" #: disk-utils/fsck.c:782 #, fuzzy msgid "wait: no more child process?!?" msgstr "等待：已無更多子行程 ?!?" #: disk-utils/fsck.c:785 sys-utils/flock.c:364 sys-utils/swapon.c:352 #: sys-utils/unshare.c:419 sys-utils/unshare.c:440 msgid "waitpid failed" msgstr "waitpid 失敗" #: disk-utils/fsck.c:803 #, fuzzy, c-format msgid "Warning... %s for device %s exited with signal %d." msgstr "警告…%s 用於裝置 %s 離開的與信號 %d。" #: disk-utils/fsck.c:809 #, fuzzy, c-format msgid "%s %s: status is %x, should never happen." msgstr "%s %s：狀態是 %x，應該永不發生。" #: disk-utils/fsck.c:855 #, c-format msgid "Finished with %s (exit status %d)\n" msgstr "以 %s 完成 (離開狀態 %d)\n" #: disk-utils/fsck.c:936 #, fuzzy, c-format msgid "error %d (%m) while executing fsck.%s for %s" msgstr "%d 當執行 fsck 時發生錯誤.%s 用於 %s" #: disk-utils/fsck.c:1002 #, fuzzy msgid "" "Either all or none of the filesystem types passed to -t must be prefixed\n" "with 'no' or '!'." msgstr "" "還是所有或沒有任何檔案系統類型傳遞到 -t 必須被前綴\n" "與『沒有』或『！』。" #: disk-utils/fsck.c:1118 #, fuzzy, c-format msgid "%s: skipping bad line in /etc/fstab: bind mount with nonzero fsck pass number" msgstr "%s：跳過不當的列在中/etc/fstab：繫結掛載與非零值 fsck 傳送號碼" #: disk-utils/fsck.c:1130 #, c-format msgid "%s: skipping nonexistent device\n" msgstr "%s：跳過不存在的裝置\n" #: disk-utils/fsck.c:1135 #, fuzzy, c-format msgid "%s: nonexistent device (\"nofail\" fstab option may be used to skip this device)\n" msgstr "%s：不存在的裝置 (「nofail」fstab 選項也許會被用來跳過這個裝置)\n" #: disk-utils/fsck.c:1152 #, fuzzy, c-format msgid "%s: skipping unknown filesystem type\n" msgstr "%s：跳過不明檔案系統型態\n" #: disk-utils/fsck.c:1166 #, fuzzy, c-format msgid "cannot check %s: fsck.%s not found" msgstr "無法檢查 %s：fsck.not 找到 %s " #: disk-utils/fsck.c:1270 msgid "Checking all file systems.\n" msgstr "檢查所有檔案系統。\n" #: disk-utils/fsck.c:1361 #, c-format msgid "--waiting-- (pass %d)\n" msgstr "--等待-- (通過 %d)\n" #: disk-utils/fsck.c:1387 #, fuzzy, c-format msgid " %s [options] -- [fs-options] [ ...]\n" msgstr "" "\n" "用法：\n" " %s [fsck-options] [fs-options] [filesys...]\n" #: disk-utils/fsck.c:1391 #, fuzzy #| msgid "Checking all file systems.\n" msgid "Check and repair a Linux filesystem.\n" msgstr "檢查所有檔案系統。\n" #: disk-utils/fsck.c:1394 #, fuzzy msgid " -A check all filesystems\n" msgstr "檢查所有檔案系統。\n" #: disk-utils/fsck.c:1395 msgid " -C [] display progress bar; file descriptor is for GUIs\n" msgstr "" #: disk-utils/fsck.c:1396 msgid " -l lock the device to guarantee exclusive access\n" msgstr "" #: disk-utils/fsck.c:1397 #, fuzzy msgid " -M do not check mounted filesystems\n" msgstr " t 變更檔案系統的類型" #: disk-utils/fsck.c:1398 msgid " -N do not execute, just show what would be done\n" msgstr "" #: disk-utils/fsck.c:1399 msgid " -P check filesystems in parallel, including root\n" msgstr "" #: disk-utils/fsck.c:1400 msgid " -R skip root filesystem; useful only with '-A'\n" msgstr "" #: disk-utils/fsck.c:1401 #, fuzzy msgid "" " -r [] report statistics for each device checked;\n" " file descriptor is for GUIs\n" msgstr " -l [或 --list]： 列出每個裝置的分割區" #: disk-utils/fsck.c:1403 #, fuzzy msgid " -s serialize the checking operations\n" msgstr " d 刪除目前的分割區" #: disk-utils/fsck.c:1404 #, fuzzy msgid " -T do not show the title on startup\n" msgstr " -f 不分割長列\n" #: disk-utils/fsck.c:1405 msgid "" " -t specify filesystem types to be checked;\n" " is allowed to be a comma-separated list\n" msgstr "" #: disk-utils/fsck.c:1407 #, fuzzy msgid " -V explain what is being done\n" msgstr " -v, --verbose 解釋什麼正在是已完成\n" #: disk-utils/fsck.c:1413 msgid "See the specific fsck.* commands for available fs-options." msgstr "" #: disk-utils/fsck.c:1460 #, fuzzy msgid "too many devices" msgstr "太多裝置" #: disk-utils/fsck.c:1472 #, fuzzy msgid "Is /proc mounted?" msgstr "是/proc 掛載？" #: disk-utils/fsck.c:1480 #, fuzzy, c-format msgid "must be root to scan for matching filesystems: %s" msgstr "必須是根到掃描用於匹配檔案系統：%s" #: disk-utils/fsck.c:1484 #, fuzzy, c-format msgid "couldn't find matching filesystem: %s" msgstr "找不到匹配檔案系統：%s" #: disk-utils/fsck.c:1492 disk-utils/fsck.c:1589 misc-utils/kill.c:236 #: sys-utils/eject.c:278 #, fuzzy msgid "too many arguments" msgstr "太多引數" #: disk-utils/fsck.c:1547 disk-utils/fsck.c:1550 #, fuzzy msgid "invalid argument of -r" msgstr "無效的引數：%s" #: disk-utils/fsck.c:1562 #, fuzzy, c-format msgid "option '%s' may be specified only once" msgstr "選項 --pid 也許會被指定的只一次" #: disk-utils/fsck.c:1569 misc-utils/kill.c:282 #, fuzzy, c-format msgid "option '%s' requires an argument" msgstr "%s 需要一個引數" #: disk-utils/fsck.c:1600 #, fuzzy, c-format msgid "invalid argument of -r: %d" msgstr "無效的引數：%s" #: disk-utils/fsck.c:1643 #, fuzzy msgid "the -l option can be used with one device only -- ignore" msgstr "-l 選項可以被使用與一個裝置只有 -- 忽略" #: disk-utils/fsck.cramfs.c:111 #, fuzzy, c-format msgid " %s [options] \n" msgstr " %s [選項] []\n" #: disk-utils/fsck.cramfs.c:114 msgid "Check and repair a compressed ROM filesystem.\n" msgstr "" #: disk-utils/fsck.cramfs.c:117 msgid " -a for compatibility only, ignored\n" msgstr "" #: disk-utils/fsck.cramfs.c:118 #, fuzzy msgid " -v, --verbose be more verbose\n" msgstr " -v, --verbose 是更多詳細的\n" #: disk-utils/fsck.cramfs.c:119 msgid " -y for compatibility only, ignored\n" msgstr "" #: disk-utils/fsck.cramfs.c:120 msgid " -b, --blocksize use this blocksize, defaults to page size\n" msgstr "" #: disk-utils/fsck.cramfs.c:121 msgid " --extract[=] test uncompression, optionally extract into \n" msgstr "" #: disk-utils/fsck.cramfs.c:158 #, c-format msgid "ioctl failed: unable to determine device size: %s" msgstr "ioctl 失敗：無法決定裝置大小：%s" #: disk-utils/fsck.cramfs.c:164 #, c-format msgid "not a block device or file: %s" msgstr "不是區塊裝置或檔案：%s" #: disk-utils/fsck.cramfs.c:167 disk-utils/fsck.cramfs.c:203 msgid "file length too short" msgstr "檔案長度太短" #: disk-utils/fsck.cramfs.c:176 disk-utils/fsck.cramfs.c:231 #: disk-utils/fsck.cramfs.c:251 libfdisk/src/bsd.c:717 libfdisk/src/bsd.c:892 #: login-utils/last.c:203 login-utils/last.c:237 sys-utils/fallocate.c:202 #, fuzzy, c-format #| msgid "seek failed" msgid "seek on %s failed" msgstr "搜尋失敗" #: disk-utils/fsck.cramfs.c:182 disk-utils/fsck.cramfs.c:184 msgid "superblock magic not found" msgstr "找不到超區塊的魔術標記" #: disk-utils/fsck.cramfs.c:187 #, fuzzy, c-format msgid "cramfs endianness is %s\n" msgstr "cramfs 尾序是 %s\n" #: disk-utils/fsck.cramfs.c:188 #, fuzzy msgid "big" msgstr "大" #: disk-utils/fsck.cramfs.c:188 #, fuzzy msgid "little" msgstr "小型" #: disk-utils/fsck.cramfs.c:192 msgid "unsupported filesystem features" msgstr "不受支援的檔案系統特徵" #: disk-utils/fsck.cramfs.c:196 #, c-format msgid "superblock size (%d) too small" msgstr "超區塊大小 (%d) 太小" #: disk-utils/fsck.cramfs.c:201 msgid "zero file count" msgstr "零個檔案計數" #: disk-utils/fsck.cramfs.c:205 #, fuzzy #| msgid "warning: file extends past end of filesystem\n" msgid "file extends past end of filesystem" msgstr "警告：檔案延伸超過檔案系統末端\n" #: disk-utils/fsck.cramfs.c:207 #, fuzzy #| msgid "warning: old cramfs format\n" msgid "old cramfs format" msgstr "警告：舊的 cramfs 格式\n" #: disk-utils/fsck.cramfs.c:216 msgid "unable to test CRC: old cramfs format" msgstr "無法測試循環冗餘檢查：舊的 cramfs 格式" #: disk-utils/fsck.cramfs.c:236 #, fuzzy, c-format #| msgid "failed to read typescript file %s" msgid "failed to read % bytes from file %s" msgstr "讀取 typescript 檔案 %s 時失敗" #: disk-utils/fsck.cramfs.c:274 msgid "crc error" msgstr "循環冗餘檢查錯誤" #: disk-utils/fsck.cramfs.c:304 disk-utils/fsck.minix.c:560 msgid "seek failed" msgstr "搜尋失敗" #: disk-utils/fsck.cramfs.c:308 #, fuzzy msgid "read romfs failed" msgstr "fread 失敗" #: disk-utils/fsck.cramfs.c:340 msgid "root inode is not directory" msgstr "根 inode 並非目錄" #: disk-utils/fsck.cramfs.c:344 #, c-format msgid "bad root offset (%lu)" msgstr "不當的根偏移 (%lu)" #: disk-utils/fsck.cramfs.c:362 msgid "data block too large" msgstr "資料區塊太大" #: disk-utils/fsck.cramfs.c:366 #, fuzzy, c-format msgid "decompression error: %s" msgstr "解壓縮錯誤 %p(%d)：%s" #: disk-utils/fsck.cramfs.c:392 #, fuzzy, c-format #| msgid " hole at %ld (%zd)\n" msgid " hole at %lu (%zu)\n" msgstr " 漏洞位於 %ld (%zd)\n" #: disk-utils/fsck.cramfs.c:399 disk-utils/fsck.cramfs.c:552 #, fuzzy, c-format #| msgid " uncompressing block at %ld to %ld (%ld)\n" msgid " uncompressing block at %lu to %lu (%lu)\n" msgstr " 解壓縮區塊位於 %ld 到 %ld (%ld)\n" #: disk-utils/fsck.cramfs.c:406 #, c-format msgid "non-block (%ld) bytes" msgstr "非區塊 (%ld) 位元組" #: disk-utils/fsck.cramfs.c:410 #, c-format msgid "non-size (%ld vs %ld) bytes" msgstr "非大小 (%ld vs %ld) 位元組" #: disk-utils/fsck.cramfs.c:415 disk-utils/fsck.cramfs.c:518 #: disk-utils/swaplabel.c:109 misc-utils/uuidd.c:366 sys-utils/fallocate.c:408 #: sys-utils/rfkill.c:551 sys-utils/setpriv.c:620 sys-utils/setpriv.c:643 #: sys-utils/swapon.c:393 term-utils/ttymsg.c:175 #, c-format msgid "write failed: %s" msgstr "寫入失敗：%s" #: disk-utils/fsck.cramfs.c:426 #, c-format msgid "lchown failed: %s" msgstr "lchown 失敗：%s" #: disk-utils/fsck.cramfs.c:430 #, c-format msgid "chown failed: %s" msgstr "chown 失敗：%s" #: disk-utils/fsck.cramfs.c:435 #, c-format msgid "utime failed: %s" msgstr "utime 失敗：%s" #: disk-utils/fsck.cramfs.c:447 #, c-format msgid "directory inode has zero offset and non-zero size: %s" msgstr "目錄 inode 有零偏移值和非零大小：%s" #: disk-utils/fsck.cramfs.c:462 #, c-format msgid "mkdir failed: %s" msgstr "mkdir 失敗：%s" #: disk-utils/fsck.cramfs.c:478 msgid "filename length is zero" msgstr "檔名長度為零" #: disk-utils/fsck.cramfs.c:480 msgid "bad filename length" msgstr "不當的檔名長度" #: disk-utils/fsck.cramfs.c:486 msgid "bad inode offset" msgstr "不當的 inode 偏移值" #: disk-utils/fsck.cramfs.c:501 msgid "file inode has zero offset and non-zero size" msgstr "檔案 inode 有零偏移值和非零大小" #: disk-utils/fsck.cramfs.c:504 msgid "file inode has zero size and non-zero offset" msgstr "檔案 inode 有零大小和非零偏移值" #: disk-utils/fsck.cramfs.c:533 msgid "symbolic link has zero offset" msgstr "符號連結有零偏移值" #: disk-utils/fsck.cramfs.c:535 msgid "symbolic link has zero size" msgstr "符號連結有零大小" #: disk-utils/fsck.cramfs.c:544 #, c-format msgid "size error in symlink: %s" msgstr "大小錯誤發生於符號連結：%s" #: disk-utils/fsck.cramfs.c:558 #, c-format msgid "symlink failed: %s" msgstr "符號連結失敗：%s" #: disk-utils/fsck.cramfs.c:571 #, c-format msgid "special file has non-zero offset: %s" msgstr "特殊檔案有非零偏移值：%s" #: disk-utils/fsck.cramfs.c:581 #, c-format msgid "fifo has non-zero size: %s" msgstr "fifo 有非零大小：%s" #: disk-utils/fsck.cramfs.c:587 #, c-format msgid "socket has non-zero size: %s" msgstr "通訊端有非零大小：%s" #: disk-utils/fsck.cramfs.c:590 #, c-format msgid "bogus mode: %s (%o)" msgstr "假造模式：%s (%o)" #: disk-utils/fsck.cramfs.c:599 #, c-format msgid "mknod failed: %s" msgstr "mknod 失敗：%s" #: disk-utils/fsck.cramfs.c:631 #, fuzzy, c-format #| msgid "directory data start (%ld) < sizeof(struct cramfs_super) + start (%ld)" msgid "directory data start (%lu) < sizeof(struct cramfs_super) + start (%zu)" msgstr "目錄資料起始 (%ld) < sizeof(struct cramfs_super) + 起始 (%ld)" #: disk-utils/fsck.cramfs.c:635 #, fuzzy, c-format #| msgid "directory data end (%ld) != file data start (%ld)" msgid "directory data end (%lu) != file data start (%lu)" msgstr "目錄資料結束 (%ld) != 檔案資料起始 (%ld)" #: disk-utils/fsck.cramfs.c:639 msgid "invalid file data offset" msgstr "無效的檔案資料偏移值" #: disk-utils/fsck.cramfs.c:688 disk-utils/mkfs.cramfs.c:736 #, fuzzy msgid "invalid blocksize argument" msgstr "無效的區塊大小引數" #: disk-utils/fsck.cramfs.c:711 #, c-format msgid "%s: OK\n" msgstr "%s：確定\n" #: disk-utils/fsck.minix.c:185 #, fuzzy #| msgid "Checking all file systems.\n" msgid "Check the consistency of a Minix filesystem.\n" msgstr "檢查所有檔案系統。\n" #: disk-utils/fsck.minix.c:187 #, fuzzy msgid " -l, --list list all filenames\n" msgstr " -l 列出所有檔名\n" #: disk-utils/fsck.minix.c:188 #, fuzzy msgid " -a, --auto automatic repair\n" msgstr " -a 自動修復\n" #: disk-utils/fsck.minix.c:189 #, fuzzy msgid " -r, --repair interactive repair\n" msgstr " -r 互動式修復\n" #: disk-utils/fsck.minix.c:190 #, fuzzy msgid " -v, --verbose be verbose\n" msgstr " -v, --verbose 列印詳細的資料\n" #: disk-utils/fsck.minix.c:191 #, fuzzy msgid " -s, --super output super-block information\n" msgstr " -s 輸出超區塊資訊\n" #: disk-utils/fsck.minix.c:192 #, fuzzy msgid " -m, --uncleared activate mode not cleared warnings\n" msgstr " -m 啟用模式無法清空的警告\n" #: disk-utils/fsck.minix.c:193 #, fuzzy msgid " -f, --force force check\n" msgstr " -f 強制檢查\n" #. TRANSLATORS: these yes no questions uses rpmatch(), and should be #. * translated. #: disk-utils/fsck.minix.c:252 #, fuzzy, c-format msgid "%s (y/n)? " msgstr "%s (y/n)？" #: disk-utils/fsck.minix.c:252 #, fuzzy, c-format msgid "%s (n/y)? " msgstr "%s (n/y)？" #: disk-utils/fsck.minix.c:269 #, fuzzy, c-format msgid "y\n" msgstr "y\n" #: disk-utils/fsck.minix.c:271 #, fuzzy, c-format msgid "n\n" msgstr "n\n" #: disk-utils/fsck.minix.c:287 #, c-format msgid "%s is mounted.\t " msgstr "%s 已掛載。\t" #: disk-utils/fsck.minix.c:289 msgid "Do you really want to continue" msgstr "您真的要繼續嗎？" #: disk-utils/fsck.minix.c:293 #, c-format msgid "check aborted.\n" msgstr "已放棄檢查。\n" #: disk-utils/fsck.minix.c:319 disk-utils/fsck.minix.c:340 #, c-format msgid "Zone nr < FIRSTZONE in file `%s'." msgstr "區域 nr < 檔案「%s」中的 FIRSTZONE。" #: disk-utils/fsck.minix.c:322 disk-utils/fsck.minix.c:343 #, c-format msgid "Zone nr >= ZONES in file `%s'." msgstr "區域 nr >= 檔案「%s」中的 ZONES。" #: disk-utils/fsck.minix.c:326 disk-utils/fsck.minix.c:347 msgid "Remove block" msgstr "移除區塊" #: disk-utils/fsck.minix.c:363 #, c-format msgid "Read error: unable to seek to block in file '%s'\n" msgstr "讀取錯誤：無法在檔案「%s」中搜尋到區塊\n" #: disk-utils/fsck.minix.c:369 #, c-format msgid "Read error: bad block in file '%s'\n" msgstr "讀取錯誤：在檔案「%s」中有不良區塊\n" #: disk-utils/fsck.minix.c:381 #, c-format msgid "" "Internal error: trying to write bad block\n" "Write request ignored\n" msgstr "" "內部錯誤：嘗試寫入不良區塊\n" "寫入要求已忽略\n" #: disk-utils/fsck.minix.c:387 msgid "seek failed in write_block" msgstr "write_block 時搜尋失敗" #: disk-utils/fsck.minix.c:390 #, c-format msgid "Write error: bad block in file '%s'\n" msgstr "寫入錯誤：在檔案「%s」中有不良區塊\n" #: disk-utils/fsck.minix.c:424 #, fuzzy, c-format #| msgid "Value out of range.\n" msgid "Warning: block out of range\n" msgstr "數值超出範圍。\n" #: disk-utils/fsck.minix.c:511 msgid "seek failed in write_super_block" msgstr "write_super_block 時搜尋失敗" #: disk-utils/fsck.minix.c:513 msgid "unable to write super-block" msgstr "無法寫入 super-block" #: disk-utils/fsck.minix.c:526 msgid "Unable to write inode map" msgstr "無法寫入 inode 對映" #: disk-utils/fsck.minix.c:529 msgid "Unable to write zone map" msgstr "無法寫入區域對映" #: disk-utils/fsck.minix.c:532 msgid "Unable to write inodes" msgstr "無法寫入 inodes" #: disk-utils/fsck.minix.c:564 msgid "unable to alloc buffer for superblock" msgstr "無法配置緩衝區給超區塊" #: disk-utils/fsck.minix.c:567 msgid "unable to read super block" msgstr "無法讀取超區塊" #: disk-utils/fsck.minix.c:589 msgid "bad magic number in super-block" msgstr "超區塊中有不當的魔術數字" #: disk-utils/fsck.minix.c:591 msgid "Only 1k blocks/zones supported" msgstr "只有支援 1k 區塊/區域" #: disk-utils/fsck.minix.c:593 #, fuzzy #| msgid "bad s_imap_blocks field in super-block" msgid "bad s_ninodes field in super-block" msgstr "超區塊中有不當的 s_imap_blocks 欄位" #: disk-utils/fsck.minix.c:595 msgid "bad s_imap_blocks field in super-block" msgstr "超區塊中有不當的 s_imap_blocks 欄位" #: disk-utils/fsck.minix.c:597 #, fuzzy #| msgid "bad s_imap_blocks field in super-block" msgid "bad s_firstdatazone field in super-block" msgstr "超區塊中有不當的 s_imap_blocks 欄位" #: disk-utils/fsck.minix.c:600 msgid "bad s_zmap_blocks field in super-block" msgstr "超區塊中有不當的 s_zmap_blocks 欄位" #: disk-utils/fsck.minix.c:616 msgid "Unable to allocate buffer for inode map" msgstr "無法配置 inode 對映緩衝區" #: disk-utils/fsck.minix.c:619 msgid "Unable to allocate buffer for zone map" msgstr "無法配置區域對映緩衝區" #: disk-utils/fsck.minix.c:622 msgid "Unable to allocate buffer for inodes" msgstr "無法配置 inodes 緩衝區" #: disk-utils/fsck.minix.c:625 msgid "Unable to allocate buffer for inode count" msgstr "無法配置 inode 計數緩衝區" #: disk-utils/fsck.minix.c:628 msgid "Unable to allocate buffer for zone count" msgstr "無法配置區域計數緩衝區" #: disk-utils/fsck.minix.c:632 msgid "Unable to read inode map" msgstr "無法讀取 inode 對映" #: disk-utils/fsck.minix.c:636 msgid "Unable to read zone map" msgstr "無法讀取區域對映" #: disk-utils/fsck.minix.c:640 msgid "Unable to read inodes" msgstr "無法讀取 inodes" #: disk-utils/fsck.minix.c:642 #, c-format msgid "Warning: Firstzone != Norm_firstzone\n" msgstr "警告：Firstzone != Norm_firstzone\n" #: disk-utils/fsck.minix.c:647 #, c-format msgid "%ld inodes\n" msgstr "%ld inodes\n" #: disk-utils/fsck.minix.c:648 #, c-format msgid "%ld blocks\n" msgstr "%ld 區塊\n" #: disk-utils/fsck.minix.c:649 disk-utils/mkfs.minix.c:568 #, fuzzy, c-format msgid "Firstdatazone=%jd (%jd)\n" msgstr "第一資料區=%ld (%ld)\n" #: disk-utils/fsck.minix.c:651 #, c-format msgid "Zonesize=%d\n" msgstr "區域大小=%d\n" #: disk-utils/fsck.minix.c:652 #, fuzzy, c-format msgid "Maxsize=%zu\n" msgstr "最大大小=%ld\n" #: disk-utils/fsck.minix.c:654 #, c-format msgid "Filesystem state=%d\n" msgstr "檔案系統狀態=%d\n" #: disk-utils/fsck.minix.c:655 #, fuzzy, c-format msgid "" "namelen=%zd\n" "\n" msgstr "" "namelen=%zd\n" "\n" #: disk-utils/fsck.minix.c:670 disk-utils/fsck.minix.c:720 #, c-format msgid "Inode %d marked unused, but used for file '%s'\n" msgstr "Inode %d 標記為未使用，但是卻用於檔案「%s」\n" #: disk-utils/fsck.minix.c:673 disk-utils/fsck.minix.c:723 msgid "Mark in use" msgstr "標記為使用中" #: disk-utils/fsck.minix.c:695 disk-utils/fsck.minix.c:743 #, c-format msgid "The file `%s' has mode %05o\n" msgstr "檔案「%s」具有模式 %05o\n" #: disk-utils/fsck.minix.c:702 disk-utils/fsck.minix.c:749 #, c-format msgid "Warning: inode count too big.\n" msgstr "警告：inode 數量太大。\n" #: disk-utils/fsck.minix.c:761 disk-utils/fsck.minix.c:769 msgid "root inode isn't a directory" msgstr "根 inode 並非目錄" #: disk-utils/fsck.minix.c:781 disk-utils/fsck.minix.c:812 #, c-format msgid "Block has been used before. Now in file `%s'." msgstr "區塊於之前已使用。現在屬於檔案「%s」。" #: disk-utils/fsck.minix.c:783 disk-utils/fsck.minix.c:814 #: disk-utils/fsck.minix.c:1149 disk-utils/fsck.minix.c:1158 #: disk-utils/fsck.minix.c:1205 disk-utils/fsck.minix.c:1214 msgid "Clear" msgstr "清除" #: disk-utils/fsck.minix.c:793 disk-utils/fsck.minix.c:824 #, c-format msgid "Block %d in file `%s' is marked not in use." msgstr "檔案「%2$s」中的 區塊 %1$d 已標記為未被使用。" #: disk-utils/fsck.minix.c:795 disk-utils/fsck.minix.c:826 msgid "Correct" msgstr "修正" #: disk-utils/fsck.minix.c:965 disk-utils/fsck.minix.c:1039 #, c-format msgid "The directory '%s' contains a bad inode number for file '%.*s'." msgstr "目錄「%s」含有不當的 inode 編號於檔案「%.*s」。" #: disk-utils/fsck.minix.c:967 disk-utils/fsck.minix.c:1041 msgid " Remove" msgstr " 移除" #: disk-utils/fsck.minix.c:983 disk-utils/fsck.minix.c:1057 #, c-format msgid "%s: bad directory: '.' isn't first\n" msgstr "%s：不當的目錄：「.」不是第一個\n" #: disk-utils/fsck.minix.c:992 disk-utils/fsck.minix.c:1066 #, c-format msgid "%s: bad directory: '..' isn't second\n" msgstr "%s：不當的目錄：「..」不是第二個\n" #: disk-utils/fsck.minix.c:1100 disk-utils/fsck.minix.c:1123 msgid "internal error" msgstr "內部錯誤" #: disk-utils/fsck.minix.c:1103 disk-utils/fsck.minix.c:1126 #, c-format msgid "%s: bad directory: size < 32" msgstr "%s：不當的目錄：大小 < 32" #: disk-utils/fsck.minix.c:1109 #, fuzzy, c-format #| msgid "%s: bad directory: '.' isn't first\n" msgid "%s: bad directory: invalid i_zone, use --repair to fix\n" msgstr "%s：不當的目錄：「.」不是第一個\n" #: disk-utils/fsck.minix.c:1138 msgid "seek failed in bad_zone" msgstr "在損毀區域中搜尋失敗" #: disk-utils/fsck.minix.c:1148 disk-utils/fsck.minix.c:1204 #, fuzzy, c-format msgid "Inode %lu mode not cleared." msgstr "Inode %lu 模式無法清空。" #: disk-utils/fsck.minix.c:1157 disk-utils/fsck.minix.c:1213 #, fuzzy, c-format msgid "Inode %lu not used, marked used in the bitmap." msgstr "Inode %lu 未使用，標記的已用於位元圖。" #: disk-utils/fsck.minix.c:1163 disk-utils/fsck.minix.c:1219 #, fuzzy, c-format msgid "Inode %lu used, marked unused in the bitmap." msgstr "Inode %lu 使用，標記的未使用的在中位元圖。" #: disk-utils/fsck.minix.c:1164 disk-utils/fsck.minix.c:1220 msgid "Set" msgstr "設定" #: disk-utils/fsck.minix.c:1168 disk-utils/fsck.minix.c:1224 #, fuzzy, c-format msgid "Inode %lu (mode = %07o), i_nlinks=%d, counted=%d." msgstr "Inode %lu (模式=%07o)，inlinks=%d(_N)，計數=%d。" #: disk-utils/fsck.minix.c:1171 disk-utils/fsck.minix.c:1227 msgid "Set i_nlinks to count" msgstr "設定 in_links 加入計數" #: disk-utils/fsck.minix.c:1183 disk-utils/fsck.minix.c:1239 #, fuzzy, c-format msgid "Zone %lu: marked in use, no file uses it." msgstr "區 %lu：標記的在中使用，沒有檔案使用它。" #: disk-utils/fsck.minix.c:1185 disk-utils/fsck.minix.c:1241 msgid "Unmark" msgstr "取消標記" #: disk-utils/fsck.minix.c:1190 disk-utils/fsck.minix.c:1246 #, fuzzy, c-format msgid "Zone %lu: in use, counted=%d\n" msgstr "區 %lu：在中使用，計數=%d\n" #: disk-utils/fsck.minix.c:1193 disk-utils/fsck.minix.c:1249 #, fuzzy, c-format msgid "Zone %lu: not in use, counted=%d\n" msgstr "區 %lu：不在使用中，計數=%d\n" #: disk-utils/fsck.minix.c:1299 msgid "bad inode size" msgstr "不當的 inode 大小" #: disk-utils/fsck.minix.c:1301 msgid "bad v2 inode size" msgstr "不當的 v2 inode 大小" #: disk-utils/fsck.minix.c:1346 msgid "need terminal for interactive repairs" msgstr "需要終端機以進行互動式修復" #: disk-utils/fsck.minix.c:1350 #, fuzzy, c-format msgid "cannot open %s: %s" msgstr "無法開啟 %s：%s" #: disk-utils/fsck.minix.c:1361 #, c-format msgid "%s is clean, no check.\n" msgstr "%s 已清除，不做檢查。\n" #: disk-utils/fsck.minix.c:1364 #, c-format msgid "Forcing filesystem check on %s.\n" msgstr "強制檢查 %s 檔案系統。\n" #: disk-utils/fsck.minix.c:1366 #, c-format msgid "Filesystem on %s is dirty, needs checking.\n" msgstr "%s 檔案系統不乾淨，需要檢查。\n" #: disk-utils/fsck.minix.c:1398 #, c-format msgid "" "\n" "%6ld inodes used (%ld%%)\n" msgstr "" "\n" "%6ld inodes 已使用 (%ld%%)\n" #: disk-utils/fsck.minix.c:1404 #, c-format msgid "%6ld zones used (%ld%%)\n" msgstr "%6ld 區域已使用 (%ld%%)\n" #: disk-utils/fsck.minix.c:1406 #, c-format msgid "" "\n" "%6d regular files\n" "%6d directories\n" "%6d character device files\n" "%6d block device files\n" "%6d links\n" "%6d symbolic links\n" "------\n" "%6d files\n" msgstr "" "\n" "%6d 標準檔案\n" "%6d 目錄\n" "%6d 字元裝置檔案\n" "%6d 區塊裝置檔案\n" "%6d 鏈結\n" "%6d 符號連結\n" "------\n" "%6d 檔案\n" #: disk-utils/fsck.minix.c:1420 #, c-format msgid "" "----------------------------\n" "FILE SYSTEM HAS BEEN CHANGED\n" "----------------------------\n" msgstr "" "----------------------------\n" "檔案系統已變更\n" "----------------------------\n" #: disk-utils/fsck.minix.c:1432 disk-utils/mkfs.minix.c:838 #: disk-utils/mkswap.c:541 disk-utils/partx.c:1058 disk-utils/resizepart.c:114 #: login-utils/su-common.c:323 login-utils/su-common.c:400 #: login-utils/utmpdump.c:391 sys-utils/dmesg.c:661 sys-utils/wdctl.c:347 #: sys-utils/wdctl.c:412 term-utils/script.c:298 term-utils/script.c:375 #: term-utils/setterm.c:887 text-utils/pg.c:1256 #, fuzzy msgid "write failed" msgstr "寫入失敗" #: disk-utils/isosize.c:106 #, c-format msgid "%s: might not be an ISO filesystem" msgstr "" #: disk-utils/isosize.c:111 disk-utils/isosize.c:113 #, fuzzy, c-format msgid "read error on %s" msgstr "讀取錯誤於 %s" #: disk-utils/isosize.c:124 #, c-format msgid "sector count: %d, sector size: %d\n" msgstr "磁區數量：%d, 磁區大小：%d\n" #: disk-utils/isosize.c:148 #, fuzzy, c-format msgid " %s [options] ...\n" msgstr "" "\n" "用法：\n" " %s [選項] iso9660_image_file\n" #: disk-utils/isosize.c:152 msgid "Show the length of an ISO-9660 filesystem.\n" msgstr "" #: disk-utils/isosize.c:155 msgid " -d, --divisor= divide the amount of bytes by \n" msgstr "" #: disk-utils/isosize.c:156 #, fuzzy msgid " -x, --sectors show sector count and size\n" msgstr " -c, --creator 顯示建立者和擁有者\n" #: disk-utils/isosize.c:187 #, fuzzy msgid "invalid divisor argument" msgstr "無效的除數引數" #: disk-utils/mkfs.bfs.c:74 #, fuzzy, c-format msgid "Usage: %s [options] device [block-count]\n" msgstr "用法：%s [選項] 裝置 [block-count]\n" #: disk-utils/mkfs.bfs.c:78 msgid "Make an SCO bfs filesystem.\n" msgstr "" #: disk-utils/mkfs.bfs.c:80 #, fuzzy, c-format msgid "" "\n" "Options:\n" " -N, --inodes=NUM specify desired number of inodes\n" " -V, --vname=NAME specify volume name\n" " -F, --fname=NAME specify file system name\n" " -v, --verbose explain what is being done\n" " -c this option is silently ignored\n" " -l this option is silently ignored\n" msgstr "" "\n" "選項：\n" " -N, --inodes=NUM 指定設想的 inodes 數量\n" " -V, --vname=名稱 指定卷冊名稱\n" " -F, --fname=名稱 指定檔案系統名稱\n" " -v, --verbose 解釋什麼正在是已完成\n" " -c 這個選項是寂靜的忽略\n" " -l 這個選項是寂靜的忽略\n" " -V, --version 輸出版本資訊然後離開\n" " -V 做為版本必須是只有選項\n" " -h, --help 顯示這份說明然後離開\n" "\n" #: disk-utils/mkfs.bfs.c:145 #, fuzzy msgid "invalid number of inodes" msgstr "無效的 inodes 數量" #: disk-utils/mkfs.bfs.c:151 msgid "volume name too long" msgstr "卷冊名稱太長" #: disk-utils/mkfs.bfs.c:158 msgid "fsname name too long" msgstr "檔案系統名稱太長" #: disk-utils/mkfs.bfs.c:196 #, fuzzy msgid "invalid block-count" msgstr "無效的 block-count" #: disk-utils/mkfs.bfs.c:204 #, c-format msgid "cannot get size of %s" msgstr "無法取得 %s 的大小" #: disk-utils/mkfs.bfs.c:209 #, c-format msgid "blocks argument too large, max is %llu" msgstr "區塊引數太大，最大是 %llu" #: disk-utils/mkfs.bfs.c:224 msgid "too many inodes - max is 512" msgstr "太多 inodes - 最大為 512" #: disk-utils/mkfs.bfs.c:234 #, c-format msgid "not enough space, need at least %llu blocks" msgstr "沒有足夠的空間，需要至少 %llu 區塊" #: disk-utils/mkfs.bfs.c:246 #, c-format msgid "Device: %s\n" msgstr "裝置：%s\n" #: disk-utils/mkfs.bfs.c:247 #, c-format msgid "Volume: <%-6s>\n" msgstr "卷冊：<%-6s>\n" #: disk-utils/mkfs.bfs.c:248 #, c-format msgid "FSname: <%-6s>\n" msgstr "檔案系統名稱：<%-6s>\n" #: disk-utils/mkfs.bfs.c:249 #, c-format msgid "BlockSize: %d\n" msgstr "區塊大小：%d\n" #: disk-utils/mkfs.bfs.c:251 #, fuzzy, c-format msgid "Inodes: %ld (in 1 block)\n" msgstr "Inodes：%lu (在中 1 區塊)\n" #: disk-utils/mkfs.bfs.c:254 #, fuzzy, c-format msgid "Inodes: %ld (in %llu blocks)\n" msgstr "Inodes：%lu (在中 %llu 區塊)\n" #: disk-utils/mkfs.bfs.c:256 #, fuzzy, c-format #| msgid "Blocks: %lld\n" msgid "Blocks: %llu\n" msgstr "區塊：%lld\n" #: disk-utils/mkfs.bfs.c:257 #, c-format msgid "Inode end: %d, Data end: %d\n" msgstr "Inode 結束：%d, 資料結束：%d\n" #: disk-utils/mkfs.bfs.c:262 msgid "error writing superblock" msgstr "寫入超區塊時發生錯誤" #: disk-utils/mkfs.bfs.c:283 msgid "error writing root inode" msgstr "寫入根 inode 時發生錯誤" #: disk-utils/mkfs.bfs.c:288 msgid "error writing inode" msgstr "寫入 inode 時發生錯誤" #: disk-utils/mkfs.bfs.c:291 msgid "seek error" msgstr "尋找錯誤" #: disk-utils/mkfs.bfs.c:297 msgid "error writing . entry" msgstr "寫入 . 項目時發生錯誤" #: disk-utils/mkfs.bfs.c:301 msgid "error writing .. entry" msgstr "寫入 .. 項目時發生錯誤" #: disk-utils/mkfs.bfs.c:304 #, c-format msgid "error closing %s" msgstr "關閉 %s 時發生錯誤" #: disk-utils/mkfs.c:45 #, fuzzy, c-format msgid " %s [options] [-t ] [fs-options] []\n" msgstr "用法：%s [選項] [-t 型態 fs-options] 裝置 [大小]\n" #: disk-utils/mkfs.c:49 #, fuzzy msgid "Make a Linux filesystem.\n" msgstr "檔案系統型態" #: disk-utils/mkfs.c:52 #, c-format msgid " -t, --type= filesystem type; when unspecified, ext2 is used\n" msgstr "" #: disk-utils/mkfs.c:53 #, c-format msgid " fs-options parameters for the real filesystem builder\n" msgstr "" #: disk-utils/mkfs.c:54 #, c-format msgid " path to the device to be used\n" msgstr "" #: disk-utils/mkfs.c:55 #, c-format msgid " number of blocks to be used on the device\n" msgstr "" #: disk-utils/mkfs.c:56 #, c-format msgid "" " -V, --verbose explain what is being done;\n" " specifying -V more than once will cause a dry-run\n" msgstr "" #: disk-utils/mkfs.c:139 include/c.h:223 login-utils/su-common.c:1435 #: login-utils/sulogin.c:791 login-utils/sulogin.c:795 sys-utils/flock.c:121 #: sys-utils/rtcwake.c:595 term-utils/script.c:618 #, c-format msgid "failed to execute %s" msgstr "執行 %s 時失敗" #: disk-utils/mkfs.cramfs.c:128 #, fuzzy, c-format #| msgid "" #| "usage: %s [-h] [-v] [-b blksize] [-e edition] [-N endian] [-i file] [-n name] dirname outfile\n" #| " -h print this help\n" #| " -v be verbose\n" #| " -E make all warnings errors (non-zero exit status)\n" #| " -b blksize use this blocksize, must equal page size\n" #| " -e edition set edition number (part of fsid)\n" #| " -N endian set cramfs endianness (big|little|host), default host\n" #| " -i file insert a file image into the filesystem (requires >= 2.4.0)\n" #| " -n name set name of cramfs filesystem\n" #| " -p pad by %d bytes for boot code\n" #| " -s sort directory entries (old option, ignored)\n" #| " -z make explicit holes (requires >= 2.3.39)\n" #| " dirname root of the filesystem to be compressed\n" #| " outfile output file\n" msgid "" "usage: %s [-h] [-v] [-b blksize] [-e edition] [-N endian] [-i file] [-n name] dirname outfile\n" " -v be verbose\n" " -E make all warnings errors (non-zero exit status)\n" " -b blksize use this blocksize, must equal page size\n" " -e edition set edition number (part of fsid)\n" " -N endian set cramfs endianness (big|little|host), default host\n" " -i file insert a file image into the filesystem\n" " -n name set name of cramfs filesystem\n" " -p pad by %d bytes for boot code\n" " -s sort directory entries (old option, ignored)\n" " -z make explicit holes\n" " dirname root of the filesystem to be compressed\n" " outfile output file\n" msgstr "" "用法：%s [-h] [-v] [-b 區塊大小] [-e 編次] [-N 尾序] [-i 檔案] [-n 名稱] dirname outfile\n" " -h 印出這個說明\n" " -v 詳細訊息\n" " -E 所有警告視為錯誤 (非零結束狀態)\n" " -b 區塊大小 使用這個區塊大小，必須等於頁面大小\n" " -e 編次 設定編次數字 (部分的 fsid)\n" " -N 尾序 設定 cramfs 尾序 (大|小|主機)，預設依主機\n" " -i 檔案 插入檔案影像到檔案系統 (需求 >= 2.4.0)\n" " -n 名稱 設定 cramfs 檔案系統的名稱\n" " -p 填充 %d 位元組於開機碼\n" " -s 排序目錄項目 (舊選項，忽略)\n" " -z 製作明確的空洞 (需求 >= 2.3.39)\n" " dirname 壓縮的檔案系統根目錄\n" " outfile 輸出檔案\n" #: disk-utils/mkfs.cramfs.c:162 #, fuzzy, c-format msgid "readlink failed: %s" msgstr "讀取失敗：%s" #: disk-utils/mkfs.cramfs.c:307 #, fuzzy, c-format msgid "could not read directory %s" msgstr "無法讀取目錄 %s" #: disk-utils/mkfs.cramfs.c:442 #, fuzzy msgid "filesystem too big. Exiting." msgstr "檔案系統太大。 離開。" #: disk-utils/mkfs.cramfs.c:601 #, c-format msgid "AIEEE: block \"compressed\" to > 2*blocklength (%ld)\n" msgstr "AIEEE：區塊「被壓縮」到 > 2*區塊長度 (%ld)\n" #: disk-utils/mkfs.cramfs.c:620 #, c-format msgid "%6.2f%% (%+ld bytes)\t%s\n" msgstr "%6.2f%% (%+ld 位元組)\t%s\n" #: disk-utils/mkfs.cramfs.c:665 #, fuzzy, c-format msgid "cannot close file %s" msgstr "無法關閉檔案 %s" #: disk-utils/mkfs.cramfs.c:742 #, fuzzy msgid "invalid edition number argument" msgstr "無效的分割區編號引數" #: disk-utils/mkfs.cramfs.c:752 #, fuzzy msgid "invalid endianness given; must be 'big', 'little', or 'host'" msgstr "無效的尾序給定的。必須是『大』，『小型』，或『主機』" #: disk-utils/mkfs.cramfs.c:818 #, fuzzy, c-format msgid "warning: guestimate of required size (upper bound) is %lldMB, but maximum image size is %uMB. We might die prematurely." msgstr "警告：guestimate 的必要項大小 (上限) 是 %lldMB，但是最大值影像大小是 %uMB。 我們也許消滅過早。" #: disk-utils/mkfs.cramfs.c:842 msgid "ROM image map" msgstr "唯讀記憶體圖像映射" #: disk-utils/mkfs.cramfs.c:854 #, c-format msgid "Including: %s\n" msgstr "包含：%s\n" #: disk-utils/mkfs.cramfs.c:860 #, c-format msgid "Directory data: %zd bytes\n" msgstr "目錄資料：%zd 位元組\n" #: disk-utils/mkfs.cramfs.c:868 #, c-format msgid "Everything: %zd kilobytes\n" msgstr "所有東西：%zd 千位元組\n" #: disk-utils/mkfs.cramfs.c:873 #, c-format msgid "Super block: %zd bytes\n" msgstr "超區塊：%zd 位元組\n" #: disk-utils/mkfs.cramfs.c:880 #, c-format msgid "CRC: %x\n" msgstr "CRC：%x\n" #: disk-utils/mkfs.cramfs.c:885 #, fuzzy, c-format msgid "not enough space allocated for ROM image (%lld allocated, %zu used)" msgstr "不足空格配置的用於唯讀記憶體影像 (%lld 配置，%zu 使用)" #: disk-utils/mkfs.cramfs.c:891 #, fuzzy, c-format msgid "ROM image write failed (%zd %zd)" msgstr "唯讀記憶體影像寫入失敗 (%zd %zd)" #: disk-utils/mkfs.cramfs.c:894 msgid "ROM image" msgstr "唯讀記憶體映像" #: disk-utils/mkfs.cramfs.c:903 #, fuzzy, c-format msgid "warning: filenames truncated to %u bytes." msgstr "警告：檔名截短至 255 位元組。" #: disk-utils/mkfs.cramfs.c:905 #, fuzzy msgid "warning: files were skipped due to errors." msgstr "警告：檔案被略過由於錯誤。" #: disk-utils/mkfs.cramfs.c:907 #, fuzzy, c-format msgid "warning: file sizes truncated to %luMB (minus 1 byte)." msgstr "警告：檔案大小截短至 %luMB (minus 1 位元組)。" #: disk-utils/mkfs.cramfs.c:911 #, fuzzy, c-format msgid "warning: uids truncated to %u bits. (This may be a security concern.)" msgstr "警告：uids 截短至 %u 位元。 (這也許會是安全上的考量.)" #: disk-utils/mkfs.cramfs.c:914 #, fuzzy, c-format msgid "warning: gids truncated to %u bits. (This may be a security concern.)" msgstr "警告：gids 截短至 %u 位元。 (這也許會是安全上的考量.)" #: disk-utils/mkfs.cramfs.c:917 #, fuzzy, c-format msgid "" "WARNING: device numbers truncated to %u bits. This almost certainly means\n" "that some device files will be wrong." msgstr "" "警告：裝置編號截短至 %u 位元。 這個幾乎某些表示\n" "該某些裝置檔案將是錯誤的。" #: disk-utils/mkfs.minix.c:138 #, fuzzy, c-format msgid " %s [options] /dev/name [blocks]\n" msgstr "用法：%s [選項] 裝置 [block-count]\n" #: disk-utils/mkfs.minix.c:140 #, fuzzy msgid " -1 use Minix version 1\n" msgstr " -T, --test 測試用於 getopt (1) 版本\n" #: disk-utils/mkfs.minix.c:141 #, fuzzy msgid " -2, -v use Minix version 2\n" msgstr " -T, --test 測試用於 getopt (1) 版本\n" #: disk-utils/mkfs.minix.c:142 #, fuzzy msgid " -3 use Minix version 3\n" msgstr " -T, --test 測試用於 getopt (1) 版本\n" #: disk-utils/mkfs.minix.c:143 #, fuzzy msgid " -n, --namelength maximum length of filenames\n" msgstr "剖析列號的時失敗" #: disk-utils/mkfs.minix.c:144 #, fuzzy msgid " -i, --inodes number of inodes for the filesystem\n" msgstr " -c, --chars 輸出字元數的之前暫停\n" #: disk-utils/mkfs.minix.c:145 #, fuzzy msgid " -c, --check check the device for bad blocks\n" msgstr " -u --unlock 移除鎖定\n" #: disk-utils/mkfs.minix.c:146 msgid " -l, --badblocks list of bad blocks from file\n" msgstr "" #: disk-utils/mkfs.minix.c:189 #, fuzzy, c-format msgid "%s: seek to boot block failed in write_tables" msgstr "%s：尋指到啟動區段失敗 在中 writetables(_T)" #: disk-utils/mkfs.minix.c:192 #, fuzzy, c-format msgid "%s: unable to clear boot sector" msgstr "%s：無法清空開機磁區" #: disk-utils/mkfs.minix.c:194 #, fuzzy, c-format msgid "%s: seek failed in write_tables" msgstr "%s：尋指失敗的在中 writetables(_T)" #: disk-utils/mkfs.minix.c:197 #, fuzzy, c-format msgid "%s: unable to write super-block" msgstr "%s：無法寫入超區塊" #: disk-utils/mkfs.minix.c:200 #, fuzzy, c-format msgid "%s: unable to write inode map" msgstr "%s：無法寫入 inode 映射" #: disk-utils/mkfs.minix.c:203 #, fuzzy, c-format msgid "%s: unable to write zone map" msgstr "%s：無法寫入區映射" #: disk-utils/mkfs.minix.c:206 #, fuzzy, c-format msgid "%s: unable to write inodes" msgstr "%s：無法寫入 inodes" #: disk-utils/mkfs.minix.c:211 #, fuzzy, c-format msgid "%s: seek failed in write_block" msgstr "%s：尋指失敗的在中 writeblock(_B)" #: disk-utils/mkfs.minix.c:214 #, fuzzy, c-format msgid "%s: write failed in write_block" msgstr "%s：寫入失敗的在中 writeblock(_B)" #: disk-utils/mkfs.minix.c:223 disk-utils/mkfs.minix.c:298 #: disk-utils/mkfs.minix.c:347 #, fuzzy, c-format msgid "%s: too many bad blocks" msgstr "%s：太多不當的區塊" #: disk-utils/mkfs.minix.c:231 #, fuzzy, c-format msgid "%s: not enough good blocks" msgstr "%s：不足良好區塊" #: disk-utils/mkfs.minix.c:546 #, c-format msgid "" "First data block at %jd, which is too far (max %d).\n" "Try specifying fewer inodes by passing --inodes " msgstr "" #: disk-utils/mkfs.minix.c:566 #, fuzzy, c-format msgid "%lu inode\n" msgid_plural "%lu inodes\n" msgstr[0] "%lu inodes\n" #: disk-utils/mkfs.minix.c:567 #, fuzzy, c-format msgid "%lu block\n" msgid_plural "%lu blocks\n" msgstr[0] "%lu 區塊\n" #: disk-utils/mkfs.minix.c:570 #, fuzzy, c-format msgid "Zonesize=%zu\n" msgstr "區域大小=%d\n" #: disk-utils/mkfs.minix.c:571 #, fuzzy, c-format msgid "" "Maxsize=%zu\n" "\n" msgstr "" "最大容量=%ld\n" "\n" #: disk-utils/mkfs.minix.c:584 #, fuzzy, c-format msgid "%s: seek failed during testing of blocks" msgstr "%s：尋指失敗的在的期間測試的區塊" #: disk-utils/mkfs.minix.c:591 #, c-format msgid "Weird values in do_check: probably bugs\n" msgstr "do_check 中出現異常值：可能錯誤\n" #: disk-utils/mkfs.minix.c:624 #, fuzzy, c-format msgid "%s: seek failed in check_blocks" msgstr "%s：尋指失敗的在中 checkblocks(_B)" #: disk-utils/mkfs.minix.c:634 #, fuzzy, c-format msgid "%s: bad blocks before data-area: cannot make fs" msgstr "%s：不當的區塊之前 data-area：無法製作 fs" #: disk-utils/mkfs.minix.c:641 disk-utils/mkfs.minix.c:665 #, fuzzy, c-format #| msgid "%d bad blocks\n" msgid "%d bad block\n" msgid_plural "%d bad blocks\n" msgstr[0] "%d 個不良區塊\n" #: disk-utils/mkfs.minix.c:650 #, fuzzy, c-format msgid "%s: can't open file of bad blocks" msgstr "%s：無法開啟檔案的不當的區塊" #: disk-utils/mkfs.minix.c:655 #, c-format msgid "badblock number input error on line %d\n" msgstr "損壞區塊編號輸入錯誤於第 %d 列\n" #: disk-utils/mkfs.minix.c:656 #, fuzzy, c-format msgid "%s: cannot read badblocks file" msgstr "%s：無法讀取 badblocks 檔案" #: disk-utils/mkfs.minix.c:696 #, c-format msgid "block size smaller than physical sector size of %s" msgstr "區段大小小於 %s 的實體磁區大小" #: disk-utils/mkfs.minix.c:699 #, c-format msgid "cannot determine size of %s" msgstr "無法決定 %s 的大小" #: disk-utils/mkfs.minix.c:707 #, c-format msgid "%s: requested blocks (%llu) exceeds available (%llu) blocks\n" msgstr "" #: disk-utils/mkfs.minix.c:710 #, fuzzy, c-format msgid "%s: number of blocks too small" msgstr "%s：區塊數量太小" #: disk-utils/mkfs.minix.c:725 disk-utils/mkfs.minix.c:731 #, fuzzy, c-format msgid "unsupported name length: %d" msgstr "不受支援的引數：%s" #: disk-utils/mkfs.minix.c:734 #, fuzzy, c-format #| msgid "unsupported filesystem features" msgid "unsupported minix file system version: %d" msgstr "不受支援的檔案系統特徵" #: disk-utils/mkfs.minix.c:771 msgid "-v is ambiguous, use '-2' instead" msgstr "" #: disk-utils/mkfs.minix.c:782 #, fuzzy msgid "failed to parse maximum length of filenames" msgstr "剖析列號的時失敗" #: disk-utils/mkfs.minix.c:786 #, fuzzy msgid "failed to parse number of inodes" msgstr "剖析列號的時失敗" #: disk-utils/mkfs.minix.c:810 #, fuzzy msgid "failed to parse number of blocks" msgstr "剖析列號的時失敗" #: disk-utils/mkfs.minix.c:818 #, c-format msgid "%s is mounted; will not make a filesystem here!" msgstr "%s 已掛載；在此將無法製作檔案系統！" #: disk-utils/mkswap.c:80 #, fuzzy, c-format msgid "Bad user-specified page size %u" msgstr "不當的使用者指定的頁面大小 %u" #: disk-utils/mkswap.c:83 #, fuzzy, c-format msgid "Using user-specified page size %d, instead of the system value %d" msgstr "使用使用者指定的頁面大小 %d，以代替系統值 %d" #: disk-utils/mkswap.c:124 #, fuzzy msgid "Label was truncated." msgstr "標貼被截斷。" #: disk-utils/mkswap.c:132 #, c-format msgid "no label, " msgstr "無標籤，" #: disk-utils/mkswap.c:140 #, c-format msgid "no uuid\n" msgstr "沒有 uuid\n" #: disk-utils/mkswap.c:148 #, fuzzy, c-format msgid "" "\n" "Usage:\n" " %s [options] device [size]\n" msgstr "" "\n" "用法：\n" " %s [選項] 裝置 [大小]\n" #: disk-utils/mkswap.c:153 msgid "Set up a Linux swap area.\n" msgstr "" #: disk-utils/mkswap.c:156 #, fuzzy, c-format msgid "" "\n" "Options:\n" " -c, --check check bad blocks before creating the swap area\n" " -f, --force allow swap size area be larger than device\n" " -p, --pagesize SIZE specify page size in bytes\n" " -L, --label LABEL specify label\n" " -v, --swapversion NUM specify swap-space version number\n" " -U, --uuid UUID specify the uuid to use\n" msgstr "" "\n" "選項：\n" " -c, --check 檢查不當的區塊之前建立交換區域\n" " -f, --force 允許交換大小區域是大於裝置\n" " -p, --pagesize 大小 指定頁面大小在中位元組\n" " -L, --label 標貼 指定標貼\n" " -v, --swapversion NUM 指定交換空間版本編號\n" " -U, --uuid UUID 指定 uuid 以使用\n" " -V, --version 輸出版本資訊然後離開\n" " -h, --help 顯示這份說明然後離開\n" "\n" #: disk-utils/mkswap.c:176 #, fuzzy, c-format #| msgid "too many bad pages" msgid "too many bad pages: %lu" msgstr "太多不良頁面" #: disk-utils/mkswap.c:197 msgid "seek failed in check_blocks" msgstr "在 check_blocks 中的尋找失敗" #: disk-utils/mkswap.c:205 #, fuzzy, c-format msgid "%lu bad page\n" msgid_plural "%lu bad pages\n" msgstr[0] "%lu 個不良頁面\n" #: disk-utils/mkswap.c:230 msgid "unable to alloc new libblkid probe" msgstr "無法配置新的 libblkid 探針" #: disk-utils/mkswap.c:232 msgid "unable to assign device to libblkid probe" msgstr "無法指派裝置給 libblkid 探針" #: disk-utils/mkswap.c:249 #, c-format msgid "warning: checking bad blocks from swap file is not supported: %s" msgstr "" #: disk-utils/mkswap.c:263 disk-utils/mkswap.c:289 disk-utils/mkswap.c:336 msgid "unable to rewind swap-device" msgstr "無法倒轉交換裝置" #: disk-utils/mkswap.c:292 msgid "unable to erase bootbits sectors" msgstr "無法清除開機磁區" #: disk-utils/mkswap.c:308 #, c-format msgid "%s: warning: wiping old %s signature." msgstr "" #: disk-utils/mkswap.c:313 #, fuzzy, c-format msgid "%s: warning: don't erase bootbits sectors" msgstr "%s：警告：不清除 bootbits 磁區" #: disk-utils/mkswap.c:316 #, c-format msgid " (%s partition table detected). " msgstr " (偵測到 %s 分割表)。" #: disk-utils/mkswap.c:318 #, c-format msgid " (compiled without libblkid). " msgstr " (編譯時未支援 libblkid)。" #: disk-utils/mkswap.c:319 #, fuzzy, c-format msgid "Use -f to force.\n" msgstr " -f 強制檢查\n" #: disk-utils/mkswap.c:341 #, fuzzy, c-format msgid "%s: unable to write signature page" msgstr "%s：無法寫入簽名頁面" #: disk-utils/mkswap.c:382 #, fuzzy msgid "parsing page size failed" msgstr "剖析頁面大小失敗" #: disk-utils/mkswap.c:388 #, fuzzy msgid "parsing version number failed" msgstr "剖析版本編號失敗" #: disk-utils/mkswap.c:391 #, fuzzy, c-format msgid "swapspace version %d is not supported" msgstr "速度 %d 不受支援" #: disk-utils/mkswap.c:397 #, fuzzy, c-format msgid "warning: ignoring -U (UUIDs are unsupported by %s)" msgstr "警告：忽略 -U (UUIDs 被不受支援的由 %s)" #: disk-utils/mkswap.c:416 msgid "only one device argument is currently supported" msgstr "" #: disk-utils/mkswap.c:423 #, fuzzy msgid "error: parsing UUID failed" msgstr "錯誤：UUID 剖析失敗" #: disk-utils/mkswap.c:432 #, fuzzy msgid "error: Nowhere to set up swap on?" msgstr "錯誤：無處可設置交換於？" #: disk-utils/mkswap.c:438 #, fuzzy msgid "invalid block count argument" msgstr "無效的區塊計數引數" #: disk-utils/mkswap.c:447 #, fuzzy, c-format msgid "error: size %llu KiB is larger than device size % KiB" msgstr "錯誤：大小 %llu KiB 是大於裝置大小 %llu KiB" #: disk-utils/mkswap.c:453 #, fuzzy, c-format msgid "error: swap area needs to be at least %ld KiB" msgstr "錯誤：交換區域需要是至少 %ld KiB" #: disk-utils/mkswap.c:458 #, fuzzy, c-format msgid "warning: truncating swap area to %llu KiB" msgstr "警告：截斷交換區域到 %llu KiB" #: disk-utils/mkswap.c:463 #, fuzzy, c-format msgid "error: %s is mounted; will not make swapspace" msgstr "錯誤：%s 被掛載；將無法製作 swapspace。" #: disk-utils/mkswap.c:470 sys-utils/swapon.c:529 #, c-format msgid "%s: insecure permissions %04o, %04o suggested." msgstr "%s：不安全的權限 %04o, 建議使用 %04o。" #: disk-utils/mkswap.c:474 sys-utils/swapon.c:534 #, fuzzy, c-format msgid "%s: insecure file owner %d, 0 (root) suggested." msgstr "%s：不安全檔案擁有者 %d，0 (根) 建議。" #: disk-utils/mkswap.c:489 msgid "Unable to set up swap-space: unreadable" msgstr "無法設置交換空間：無法讀取" #: disk-utils/mkswap.c:494 #, fuzzy, c-format #| msgid "Setting up swapspace version 1, size = %llu KiB\n" msgid "Setting up swapspace version %d, size = %s (% bytes)\n" msgstr "設定 swapspace 版本 1, 大小 = %llu KiB\n" #: disk-utils/mkswap.c:514 #, fuzzy, c-format msgid "%s: unable to obtain selinux file label" msgstr "%s：無法得到 selinux 檔案標貼" #: disk-utils/mkswap.c:517 msgid "unable to matchpathcon()" msgstr "無法 matchpathcon()" #: disk-utils/mkswap.c:520 msgid "unable to create new selinux context" msgstr "無法建立新的 selinux 相關項目" #: disk-utils/mkswap.c:522 msgid "couldn't compute selinux context" msgstr "無法計算 selinux 相關項目" #: disk-utils/mkswap.c:528 #, fuzzy, c-format msgid "unable to relabel %s to %s" msgstr "無法 relabel %s 到 %s" #: disk-utils/partx.c:86 #, fuzzy msgid "partition number" msgstr "分割區編號" #: disk-utils/partx.c:87 #, fuzzy msgid "start of the partition in sectors" msgstr "開始的分割在中磁區" #: disk-utils/partx.c:88 #, fuzzy msgid "end of the partition in sectors" msgstr "結束的分割在中磁區" #: disk-utils/partx.c:89 #, fuzzy msgid "number of sectors" msgstr "磁區數量" #: disk-utils/partx.c:90 #, fuzzy msgid "human readable size" msgstr "人類 readable 大小" #: disk-utils/partx.c:91 #, fuzzy msgid "partition name" msgstr "分割名稱" #: disk-utils/partx.c:92 misc-utils/findmnt.c:108 misc-utils/lsblk.c:173 #, fuzzy msgid "partition UUID" msgstr "分割 UUID" #: disk-utils/partx.c:93 #, fuzzy msgid "partition table type (dos, gpt, ...)" msgstr "分割表型態 (DOS、gpt，...)" #: disk-utils/partx.c:94 misc-utils/lsblk.c:174 #, fuzzy msgid "partition flags" msgstr "分割旗標" #: disk-utils/partx.c:95 msgid "partition type (a string, a UUID, or hex)" msgstr "" #: disk-utils/partx.c:114 sys-utils/losetup.c:521 sys-utils/losetup.c:630 #, fuzzy msgid "failed to initialize loopcxt" msgstr "初始化 loopcxt 時失敗" #: disk-utils/partx.c:118 #, fuzzy, c-format msgid "%s: failed to find unused loop device" msgstr "%s：無法尋找未使用的迴圈裝置" #: disk-utils/partx.c:122 #, fuzzy, c-format msgid "Trying to use '%s' for the loop device\n" msgstr "嘗試使用『%s』用於迴圈裝置\n" #: disk-utils/partx.c:126 #, fuzzy, c-format msgid "%s: failed to set backing file" msgstr "%s：無法設定上一步檔案" #: disk-utils/partx.c:131 sys-utils/losetup.c:565 #, fuzzy, c-format msgid "%s: failed to set up loop device" msgstr "%s：無法設定迴圈裝置" #: disk-utils/partx.c:161 login-utils/lslogins.c:307 misc-utils/fincore.c:92 #: misc-utils/findmnt.c:376 misc-utils/lsblk.c:367 misc-utils/lslocks.c:342 #: misc-utils/uuidparse.c:125 misc-utils/wipefs.c:126 sys-utils/losetup.c:110 #: sys-utils/lscpu.c:220 sys-utils/lsipc.c:232 sys-utils/lsmem.c:180 #: sys-utils/lsns.c:223 sys-utils/prlimit.c:277 sys-utils/rfkill.c:160 #: sys-utils/swapon.c:150 sys-utils/wdctl.c:151 sys-utils/zramctl.c:146 #, c-format msgid "unknown column: %s" msgstr "不明直欄：%s" #: disk-utils/partx.c:208 #, fuzzy, c-format msgid "%s: failed to get partition number" msgstr "%s：無法提取分割區編號" #: disk-utils/partx.c:286 disk-utils/partx.c:324 disk-utils/partx.c:477 #, fuzzy, c-format msgid "specified range <%d:%d> does not make sense" msgstr "指定的範圍<%d:%d>不具任何意義" #: disk-utils/partx.c:290 #, c-format msgid "range recount: max partno=%d, lower=%d, upper=%d\n" msgstr "" #: disk-utils/partx.c:297 #, fuzzy, c-format msgid "%s: error deleting partition %d" msgstr "%s：錯誤刪除分割 %d" #: disk-utils/partx.c:299 #, fuzzy, c-format msgid "%s: error deleting partitions %d-%d" msgstr "%s：錯誤刪除分割區 %d-%d" #: disk-utils/partx.c:333 #, fuzzy, c-format msgid "%s: partition #%d removed\n" msgstr "%s：分割 #%d 移除\n" #: disk-utils/partx.c:337 #, fuzzy, c-format msgid "%s: partition #%d doesn't exist\n" msgstr "%s：分割 #%d 已經不存在\n" #: disk-utils/partx.c:342 #, fuzzy, c-format msgid "%s: deleting partition #%d failed" msgstr "%s：刪除分割 #%d 失敗" #: disk-utils/partx.c:362 #, fuzzy, c-format msgid "%s: error adding partition %d" msgstr "%s：錯誤加入分割 %d" #: disk-utils/partx.c:364 #, fuzzy, c-format msgid "%s: error adding partitions %d-%d" msgstr "%s：錯誤加入分割區 %d-%d" #: disk-utils/partx.c:405 disk-utils/partx.c:513 #, fuzzy, c-format msgid "%s: partition #%d added\n" msgstr "%s：分割 #%d 已加入\n" #: disk-utils/partx.c:410 #, fuzzy, c-format msgid "%s: adding partition #%d failed" msgstr "%s：加入分割 #%d 失敗" #: disk-utils/partx.c:445 #, fuzzy, c-format msgid "%s: error updating partition %d" msgstr "%s：錯誤刪除分割 %d" #: disk-utils/partx.c:447 #, fuzzy, c-format msgid "%s: error updating partitions %d-%d" msgstr "%s：錯誤刪除分割區 %d-%d" #: disk-utils/partx.c:486 #, fuzzy, c-format msgid "%s: no partition #%d" msgstr "%s：分割 #%d 已加入\n" #: disk-utils/partx.c:507 #, fuzzy, c-format msgid "%s: partition #%d resized\n" msgstr "%s：分割 #%d 移除\n" #: disk-utils/partx.c:521 #, fuzzy, c-format msgid "%s: updating partition #%d failed" msgstr "%s：刪除分割 #%d 失敗" #: disk-utils/partx.c:562 #, fuzzy, c-format msgid "#%2d: %9ju-%9ju (%9ju sector, %6ju MB)\n" msgid_plural "#%2d: %9ju-%9ju (%9ju sectors, %6ju MB)\n" msgstr[0] "#%2d：%9 ju-%9 ju (%9 ju 磁區，%6 ju MB)\n" #: disk-utils/partx.c:678 misc-utils/fincore.c:373 misc-utils/findmnt.c:1622 #: misc-utils/lsblk.c:1930 misc-utils/lslocks.c:462 sys-utils/losetup.c:333 #: sys-utils/lscpu.c:1618 sys-utils/prlimit.c:306 sys-utils/rfkill.c:467 #: sys-utils/swapon.c:293 sys-utils/wdctl.c:271 #, fuzzy #| msgid "failed to initialize output column" msgid "failed to allocate output column" msgstr "初始化輸出欄時失敗" #: disk-utils/partx.c:722 #, fuzzy, c-format msgid "failed to initialize blkid filter for '%s'" msgstr "初始化 blkid 篩選器用於『%s 時失敗』" #: disk-utils/partx.c:730 #, fuzzy, c-format msgid "%s: failed to read partition table" msgstr "%s：無法讀取分割表" #: disk-utils/partx.c:736 #, fuzzy, c-format msgid "%s: partition table type '%s' detected\n" msgstr "%s：分割表型態『%s』偵測到\n" #: disk-utils/partx.c:740 #, fuzzy, c-format msgid "%s: partition table with no partitions" msgstr "%s：分割表不具任何分割區" #: disk-utils/partx.c:753 #, fuzzy, c-format msgid " %s [-a|-d|-s|-u] [--nr | ] \n" msgstr " %s [-a|-d|-s] [--nr |<分割>]<磁碟>\n" #: disk-utils/partx.c:757 msgid "Tell the kernel about the presence and numbering of partitions.\n" msgstr "" #: disk-utils/partx.c:760 #, fuzzy msgid " -a, --add add specified partitions or all of them\n" msgstr " -i, --irq 指定並列埠 irq\n" #: disk-utils/partx.c:761 msgid " -d, --delete delete specified partitions or all of them\n" msgstr "" #: disk-utils/partx.c:762 #, fuzzy msgid " -u, --update update specified partitions or all of them\n" msgstr " -n, --noparity 設定同位到無\n" #: disk-utils/partx.c:763 #, fuzzy msgid "" " -s, --show list partitions\n" "\n" msgstr " -n, --noparity 設定同位到無\n" #: disk-utils/partx.c:764 misc-utils/lsblk.c:1640 sys-utils/lsmem.c:507 msgid " -b, --bytes print SIZE in bytes rather than in human readable format\n" msgstr "" #: disk-utils/partx.c:765 msgid " -g, --noheadings don't print headings for --show\n" msgstr "" #: disk-utils/partx.c:766 msgid " -n, --nr specify the range of partitions (e.g. --nr 2:4)\n" msgstr "" #: disk-utils/partx.c:767 #, fuzzy msgid " -o, --output define which output columns to use\n" msgstr " -o, --options 短選項為辨識的\n" #: disk-utils/partx.c:768 misc-utils/lsblk.c:1656 sys-utils/lsmem.c:505 #, fuzzy msgid " -P, --pairs use key=\"value\" output format\n" msgstr " -V, --version 輸出版本資訊\n" #: disk-utils/partx.c:769 misc-utils/lsblk.c:1657 sys-utils/lsmem.c:510 #, fuzzy msgid " -r, --raw use raw output format\n" msgstr " -V, --version 輸出版本資訊\n" #: disk-utils/partx.c:770 #, fuzzy msgid " -S, --sector-size overwrite sector size\n" msgstr " -c, --creator 顯示建立者和擁有者\n" #: disk-utils/partx.c:771 #, fuzzy #| msgid " p print the partition table" msgid " -t, --type specify the partition type\n" msgstr " p 印出分割表" #: disk-utils/partx.c:772 #, fuzzy #| msgid " -T [or --list-types]:list the known partition types" msgid " --list-types list supported partition types and exit\n" msgstr " -T [或 --list-types]：列出已知分割區類型" #: disk-utils/partx.c:773 sys-utils/fallocate.c:101 #, fuzzy msgid " -v, --verbose verbose mode\n" msgstr " -v, --verbose 列印詳細的資料\n" #: disk-utils/partx.c:856 #, fuzzy msgid "failed to parse --nr range" msgstr "剖析 --nr 時失敗 範圍" #: disk-utils/partx.c:942 msgid "partition and disk name do not match" msgstr "" #: disk-utils/partx.c:971 #, fuzzy msgid "--nr and are mutually exclusive" msgstr "--nr 和 彼此互斥" #: disk-utils/partx.c:990 #, fuzzy, c-format msgid "partition: %s, disk: %s, lower: %d, upper: %d\n" msgstr "分割：%s，磁碟：%s，降低：%d，大寫：%d\n" #: disk-utils/partx.c:1002 #, fuzzy, c-format msgid "%s: cannot delete partitions" msgstr "%s：無法刪除分割區" #: disk-utils/partx.c:1005 #, fuzzy, c-format msgid "%s: partitioned loop devices unsupported" msgstr "%s：分割的迴圈裝置不受支援的" #: disk-utils/partx.c:1022 #, fuzzy, c-format msgid "%s: failed to initialize blkid prober" msgstr "%s：無法初始化 blkid prober" #: disk-utils/raw.c:50 #, fuzzy, c-format msgid "" " %1$s %2$srawN \n" " %1$s %2$srawN /dev/\n" " %1$s -q %2$srawN\n" " %1$s -qa\n" msgstr "" " %1$s %2$srawN <次要>\n" " %1$s %2$srawN/dev/\n" " %1$s -q %2$srawN\n" " %1$s -qa\n" #: disk-utils/raw.c:57 msgid "Bind a raw character device to a block device.\n" msgstr "" #: disk-utils/raw.c:60 #, fuzzy msgid " -q, --query set query mode\n" msgstr " -q, --query 設定查詢模式\n" #: disk-utils/raw.c:61 #, fuzzy msgid " -a, --all query all raw devices\n" msgstr " -a, --all 查詢所有原始裝置\n" #: disk-utils/raw.c:167 #, fuzzy, c-format msgid "Device '%s' is the control raw device (use raw where is greater than zero)" msgstr "裝置『%s』是控制原始裝置 (使用原始 位置是大於零)" #: disk-utils/raw.c:184 #, fuzzy, c-format msgid "Cannot locate block device '%s'" msgstr "無法尋找位置區塊裝置『%s』" #: disk-utils/raw.c:187 #, fuzzy, c-format msgid "Device '%s' is not a block device" msgstr "裝置『%s』並非區塊裝置" #: disk-utils/raw.c:196 disk-utils/raw.c:199 sys-utils/ipcrm.c:352 #: sys-utils/ipcrm.c:366 sys-utils/ipcrm.c:380 #, fuzzy msgid "failed to parse argument" msgstr "剖析引數時失敗" #: disk-utils/raw.c:217 #, fuzzy, c-format msgid "Cannot open master raw device '%s'" msgstr "無法開啟主原始裝置『%s』" #: disk-utils/raw.c:232 #, fuzzy, c-format msgid "Cannot locate raw device '%s'" msgstr "無法尋找位置原始裝置『%s』" #: disk-utils/raw.c:235 #, fuzzy, c-format msgid "Raw device '%s' is not a character dev" msgstr "原始裝置『%s』並非字元 dev" #: disk-utils/raw.c:239 #, fuzzy, c-format msgid "Device '%s' is not a raw dev" msgstr "裝置『%s』並非原始 dev" #: disk-utils/raw.c:249 #, fuzzy msgid "Error querying raw device" msgstr "查詢原始裝置時發生錯誤" #: disk-utils/raw.c:258 disk-utils/raw.c:273 #, fuzzy, c-format msgid "%sraw%d: bound to major %d, minor %d\n" msgstr "%sraw%d： 約束到主要的 %d，次要 %d\n" #: disk-utils/raw.c:272 #, fuzzy msgid "Error setting raw device" msgstr "設定原始裝置時發生錯誤" #: disk-utils/resizepart.c:20 #, fuzzy, c-format msgid " %s \n" msgstr " %s <分割區編號><長度>\n" #: disk-utils/resizepart.c:24 msgid "Tell the kernel about the new size of a partition.\n" msgstr "" #: disk-utils/resizepart.c:106 #, fuzzy, c-format msgid "%s: failed to get start of the partition number %s" msgstr "%s：無法提取開始的分割區編號 %s" #: disk-utils/resizepart.c:111 #, fuzzy msgid "failed to resize partition" msgstr "調整大小分割時失敗" #: disk-utils/sfdisk.c:232 #, fuzzy msgid "failed to allocate nested libfdisk context" msgstr "配置迭代器時失敗" #: disk-utils/sfdisk.c:292 #, fuzzy, c-format #| msgid "cannot open %s" msgid "cannot seek %s" msgstr "無法開啟 %s" #: disk-utils/sfdisk.c:303 libfdisk/src/bsd.c:722 libfdisk/src/bsd.c:896 #, fuzzy, c-format msgid "cannot write %s" msgstr "無法寫入 %s" #: disk-utils/sfdisk.c:310 #, c-format msgid "%12s (offset %5ju, size %5ju): %s" msgstr "" #: disk-utils/sfdisk.c:316 #, fuzzy, c-format #| msgid "%s: failed to write label" msgid "%s: failed to create a backup" msgstr "%s：無法寫入標籤" #: disk-utils/sfdisk.c:329 msgid "failed to create a backup file, $HOME undefined" msgstr "" #: disk-utils/sfdisk.c:355 msgid "Backup files:" msgstr "" #: disk-utils/sfdisk.c:380 msgid "failed to read new partition from device; ignoring --move-data" msgstr "" #: disk-utils/sfdisk.c:382 #, fuzzy msgid "failed to get size of the new partition; ignoring --move-data" msgstr "%s：無法提取開始的分割區編號 %s" #: disk-utils/sfdisk.c:384 #, fuzzy msgid "failed to get start of the new partition; ignoring --move-data" msgstr "%s：無法提取開始的分割區編號 %s" #: disk-utils/sfdisk.c:386 #, fuzzy msgid "failed to get size of the old partition; ignoring --move-data" msgstr "%s：無法提取開始的分割區編號 %s" #: disk-utils/sfdisk.c:388 #, fuzzy msgid "failed to get start of the old partition; ignoring --move-data" msgstr "%s：無法提取開始的分割區編號 %s" #: disk-utils/sfdisk.c:390 msgid "start of the partition has not been moved; ignoring --move-data" msgstr "" #: disk-utils/sfdisk.c:392 msgid "new partition is smaller than original; ignoring --move-data" msgstr "" #: disk-utils/sfdisk.c:442 msgid "Data move:" msgstr "" #: disk-utils/sfdisk.c:444 #, fuzzy, c-format #| msgid "cannot open typescript file %s" msgid " typescript file: %s" msgstr "無法開啟 typescript 檔案 %s" #: disk-utils/sfdisk.c:445 #, c-format msgid " old start: %ju, new start: %ju (move %ju sectors)\n" msgstr "" #: disk-utils/sfdisk.c:452 #, fuzzy #| msgid "Do you want to write this to disk? [ynq] " msgid "Do you want to move partition data?" msgstr "您要將這個寫入磁碟嗎？[ynq] " #: disk-utils/sfdisk.c:454 disk-utils/sfdisk.c:1814 msgid "Leaving." msgstr "" #: disk-utils/sfdisk.c:527 #, fuzzy, c-format msgid "%s: failed to move data" msgstr "%s：無法剖析 fstab" #: disk-utils/sfdisk.c:542 #, fuzzy msgid "The partition table is unchanged (--no-act)." msgstr "分割區 %d 的系統類型未被變更：%x (%s)\n" #: disk-utils/sfdisk.c:548 #, fuzzy #| msgid "" #| "The partition table has been altered!\n" #| "\n" msgid "" "\n" "The partition table has been altered." msgstr "" "分割表已變更！\n" "\n" #: disk-utils/sfdisk.c:631 #, fuzzy, c-format msgid "unsupported label '%s'" msgstr "不受支援的引數：%s" #: disk-utils/sfdisk.c:634 msgid "" "Id Name\n" "\n" msgstr "" "識別號 名稱\n" "\n" #: disk-utils/sfdisk.c:664 #, fuzzy #| msgid " %s: unrecognized partition table type\n" msgid "unrecognized partition table type" msgstr " %s: 無法辨識的分割表類型\n" #: disk-utils/sfdisk.c:717 #, fuzzy, c-format msgid "Cannot get size of %s" msgstr "無法提取大小的 %s" #: disk-utils/sfdisk.c:754 #, fuzzy, c-format #| msgid "total: %llu blocks\n" msgid "total: %ju blocks\n" msgstr "總計：%llu 區塊\n" #: disk-utils/sfdisk.c:816 disk-utils/sfdisk.c:894 disk-utils/sfdisk.c:935 #: disk-utils/sfdisk.c:965 disk-utils/sfdisk.c:1032 disk-utils/sfdisk.c:1096 #: disk-utils/sfdisk.c:1151 disk-utils/sfdisk.c:1207 disk-utils/sfdisk.c:1561 #, fuzzy msgid "no disk device specified" msgstr "沒有迴圈裝置指定的" #: disk-utils/sfdisk.c:830 #, fuzzy msgid "cannot switch to PMBR" msgstr "無法寫入 %s" #: disk-utils/sfdisk.c:832 msgid "toggle boot flags is supported for MBR or PMBR only" msgstr "" #: disk-utils/sfdisk.c:867 disk-utils/sfdisk.c:914 disk-utils/sfdisk.c:1037 #: disk-utils/sfdisk.c:1101 disk-utils/sfdisk.c:1156 disk-utils/sfdisk.c:1212 #: disk-utils/sfdisk.c:1559 disk-utils/sfdisk.c:2056 #, fuzzy msgid "failed to parse partition number" msgstr "%s：無法提取分割區編號" #: disk-utils/sfdisk.c:872 #, c-format msgid "%s: partition %d: failed to toggle bootable flag" msgstr "" #: disk-utils/sfdisk.c:909 disk-utils/sfdisk.c:917 #, fuzzy, c-format msgid "%s: partition %zu: failed to delete" msgstr "%s：分割 #%d 已加入\n" #: disk-utils/sfdisk.c:972 #, fuzzy, c-format msgid "%s: does not contain a recognized partition table" msgstr "裝置不包含辨識的分割表\n" #: disk-utils/sfdisk.c:976 #, fuzzy #| msgid "failed to callocate cpu set" msgid "failed to allocate dump struct" msgstr "callocate cpu 集合時失敗" #: disk-utils/sfdisk.c:980 #, fuzzy, c-format msgid "%s: failed to dump partition table" msgstr "%s：無法讀取分割表" #: disk-utils/sfdisk.c:1010 #, fuzzy, c-format msgid "%s: no partition table found" msgstr "沒有分割表呈現。" #: disk-utils/sfdisk.c:1014 #, fuzzy, c-format msgid "%s: partition %zu: partition table contains only %zu partitions" msgstr "%s：分割表不具任何分割區" #: disk-utils/sfdisk.c:1017 #, fuzzy, c-format msgid "%s: partition %zu: partition is unused" msgstr "%s：分割表不具任何分割區" #: disk-utils/sfdisk.c:1036 disk-utils/sfdisk.c:1100 disk-utils/sfdisk.c:1155 #: disk-utils/sfdisk.c:1211 #, fuzzy #| msgid "no action specified" msgid "no partition number specified" msgstr "未指定任何動作" #: disk-utils/sfdisk.c:1042 disk-utils/sfdisk.c:1106 disk-utils/sfdisk.c:1161 #: disk-utils/sfdisk.c:1217 #, fuzzy #| msgid "unexpected number of arguments" msgid "unexpected arguments" msgstr "未預期的引數數量" #: disk-utils/sfdisk.c:1057 #, fuzzy, c-format msgid "%s: partition %zu: failed to get partition type" msgstr "%s：無法提取分割區編號" #: disk-utils/sfdisk.c:1076 #, fuzzy, c-format msgid "failed to parse %s partition type '%s'" msgstr "剖析機能『%s 時失敗』" #: disk-utils/sfdisk.c:1080 #, fuzzy, c-format msgid "%s: partition %zu: failed to set partition type" msgstr "%s：分割表不具任何分割區" #: disk-utils/sfdisk.c:1118 #, fuzzy, c-format msgid "%s: partition %zu: failed to get partition UUID" msgstr "%s：分割表不具任何分割區" #: disk-utils/sfdisk.c:1131 disk-utils/sfdisk.c:1186 disk-utils/sfdisk.c:1240 #, fuzzy msgid "failed to allocate partition object" msgstr "配置迭代器時失敗" #: disk-utils/sfdisk.c:1135 #, fuzzy, c-format msgid "%s: partition %zu: failed to set partition UUID" msgstr "%s：分割表不具任何分割區" #: disk-utils/sfdisk.c:1173 #, fuzzy, c-format msgid "%s: partition %zu: failed to get partition name" msgstr "%s：無法提取分割區編號" #: disk-utils/sfdisk.c:1190 #, fuzzy, c-format msgid "%s: partition %zu: failed to set partition name" msgstr "%s：無法提取分割區編號" #: disk-utils/sfdisk.c:1244 #, fuzzy, c-format msgid "%s: partition %zu: failed to set partition attributes" msgstr "%s：分割表不具任何分割區" #: disk-utils/sfdisk.c:1287 #, fuzzy msgid " Commands:\n" msgstr "沒有命令？" #: disk-utils/sfdisk.c:1289 #, fuzzy msgid " write write table to disk and exit\n" msgstr "寫入表格到磁碟然後離開" #: disk-utils/sfdisk.c:1290 msgid " quit show new situation and wait for user's feedback before write\n" msgstr "" #: disk-utils/sfdisk.c:1291 msgid " abort exit sfdisk shell\n" msgstr "" #: disk-utils/sfdisk.c:1292 #, fuzzy #| msgid " p print the partition table" msgid " print display the partition table\n" msgstr " p 印出分割表" #: disk-utils/sfdisk.c:1293 #, fuzzy msgid " help show this help text\n" msgstr " -h, --help 顯示這份說明然後離開\n" #: disk-utils/sfdisk.c:1295 msgid " Ctrl-D the same as 'quit'\n" msgstr "" #: disk-utils/sfdisk.c:1299 #, fuzzy msgid " Input format:\n" msgstr "輸出格式：\n" #: disk-utils/sfdisk.c:1301 msgid " , , , \n" msgstr "" #: disk-utils/sfdisk.c:1304 msgid "" " Beginning of the partition in sectors, or bytes if\n" " specified in the format {K,M,G,T,P,E,Z,Y}.\n" " The default is the first free space.\n" msgstr "" #: disk-utils/sfdisk.c:1309 msgid "" " Size of the partition in sectors, or bytes if\n" " specified in the format {K,M,G,T,P,E,Z,Y}.\n" " The default is all available space.\n" msgstr "" #: disk-utils/sfdisk.c:1314 msgid " The partition type. Default is a Linux data partition.\n" msgstr "" #: disk-utils/sfdisk.c:1315 msgid " MBR: hex or L,S,E,X,U,R,V shortcuts.\n" msgstr "" #: disk-utils/sfdisk.c:1316 msgid " GPT: UUID or L,S,H,U,R,V shortcuts.\n" msgstr "" #: disk-utils/sfdisk.c:1319 msgid " Use '*' to mark an MBR partition as bootable.\n" msgstr "" #: disk-utils/sfdisk.c:1323 msgid " Example:\n" msgstr "" #: disk-utils/sfdisk.c:1325 msgid " , 4G Creates a 4GiB partition at default start offset.\n" msgstr "" #: disk-utils/sfdisk.c:1357 sys-utils/dmesg.c:1539 #, fuzzy msgid "unsupported command" msgstr "不受支援的命令" #: disk-utils/sfdisk.c:1359 #, fuzzy, c-format msgid "line %d: unsupported command" msgstr "不受支援的命令" #: disk-utils/sfdisk.c:1480 #, c-format msgid "The old %s signature may remain on the device. It is recommended to wipe the device with wipefs(8) or sfdisk --wipe, in order to avoid possible collisions." msgstr "" #: disk-utils/sfdisk.c:1528 #, fuzzy msgid "failed to allocate partition name" msgstr "加入分割時失敗" #: disk-utils/sfdisk.c:1569 #, fuzzy msgid "failed to allocate script handler" msgstr "配置迭代器時失敗" #: disk-utils/sfdisk.c:1585 #, c-format msgid "%s: cannot modify partition %d: no partition table was found" msgstr "" #: disk-utils/sfdisk.c:1590 #, fuzzy, c-format msgid "%s: cannot modify partition %d: partition table contains only %zu partitions" msgstr "警告：分割 %s 未被包含在中分割 %s\n" #: disk-utils/sfdisk.c:1596 #, fuzzy, c-format msgid "warning: %s: partition %d is not defined yet" msgstr "尚無分割區被定義！\n" #: disk-utils/sfdisk.c:1614 #, c-format msgid "" "\n" "Welcome to sfdisk (%s)." msgstr "" #: disk-utils/sfdisk.c:1622 #, fuzzy #| msgid "Checking that no-one is using this disk right now ...\n" msgid "Checking that no-one is using this disk right now ..." msgstr "檢查是否沒有人現在正使用這個磁碟…\n" #: disk-utils/sfdisk.c:1625 msgid "" " FAILED\n" "\n" msgstr "" #: disk-utils/sfdisk.c:1628 #, fuzzy #| msgid "" #| "\n" #| "This disk is currently in use - repartitioning is probably a bad idea.\n" #| "Umount all file systems, and swapoff all swap partitions on this disk.\n" #| "Use the --no-reread flag to suppress this check.\n" msgid "" "This disk is currently in use - repartitioning is probably a bad idea.\n" "Umount all file systems, and swapoff all swap partitions on this disk.\n" "Use the --no-reread flag to suppress this check.\n" msgstr "" "\n" "這個磁碟目前在使用中 - 重新設定分割區可能不是個好主意。\n" "卸載所有檔案系統，並關閉這個磁碟上的所有交換分割區。\n" "使用 --no-reread 旗標以抑制這個檢查。\n" #: disk-utils/sfdisk.c:1633 #, fuzzy #| msgid "Use the --force flag to overrule all checks.\n" msgid "Use the --force flag to overrule all checks." msgstr "使用 --force 旗標以駁回所有檢查。\n" #: disk-utils/sfdisk.c:1635 #, fuzzy #| msgid "%s: OK\n" msgid "" " OK\n" "\n" msgstr "%s：確定\n" #: disk-utils/sfdisk.c:1647 #, fuzzy #| msgid "Old situation:\n" msgid "" "\n" "Old situation:" msgstr "舊的情況：\n" #: disk-utils/sfdisk.c:1665 #, c-format msgid "" "\n" "sfdisk is going to create a new '%s' disk label.\n" "Use 'label: ' before you define a first partition\n" "to override the default." msgstr "" #: disk-utils/sfdisk.c:1668 #, fuzzy msgid "" "\n" "Type 'help' to get more information.\n" msgstr "嘗試『%s --help』以獲得更多資訊。\n" #: disk-utils/sfdisk.c:1686 #, fuzzy msgid "All partitions used." msgstr "這個分割區已在使用中" #: disk-utils/sfdisk.c:1714 msgid "Done.\n" msgstr "完成。\n" #: disk-utils/sfdisk.c:1726 #, fuzzy #| msgid "No more partitions" msgid "Ignoring partition." msgstr "已無多餘的分割區" #: disk-utils/sfdisk.c:1735 disk-utils/sfdisk.c:1795 msgid "Failed to apply script headers, disk label not created." msgstr "" #: disk-utils/sfdisk.c:1754 #, fuzzy, c-format msgid "Failed to add #%d partition" msgstr "加入分割時失敗" #: disk-utils/sfdisk.c:1777 msgid "Script header accepted." msgstr "" #: disk-utils/sfdisk.c:1802 #, fuzzy #| msgid "New situation:\n" msgid "" "\n" "New situation:" msgstr "新的情況：\n" #: disk-utils/sfdisk.c:1812 #, fuzzy #| msgid "Do you want to write this to disk? [ynq] " msgid "Do you want to write this to disk?" msgstr "您要將這個寫入磁碟嗎？[ynq] " #: disk-utils/sfdisk.c:1825 msgid "Leaving.\n" msgstr "" #: disk-utils/sfdisk.c:1839 #, fuzzy, c-format msgid "" " %1$s [options] [[-N] ]\n" " %1$s [options] \n" msgstr "" " %1$s [選項] []\n" " %1$s [選項] -f|<檔案>\n" #: disk-utils/sfdisk.c:1846 msgid " -A, --activate [ ...] list or set bootable (P)MBR partitions\n" msgstr "" #: disk-utils/sfdisk.c:1847 #, fuzzy msgid " -d, --dump dump partition table (usable for later input)\n" msgstr " -u, --unquote 不引言輸出\n" #: disk-utils/sfdisk.c:1848 #, fuzzy msgid " -J, --json dump partition table in JSON format\n" msgstr " -V, --version 輸出版本資訊\n" #: disk-utils/sfdisk.c:1849 msgid " -g, --show-geometry [ ...] list geometry of all or specified devices\n" msgstr "" #: disk-utils/sfdisk.c:1850 #, fuzzy msgid " -l, --list [ ...] list partitions of each device\n" msgstr " -n, --noparity 設定同位到無\n" #: disk-utils/sfdisk.c:1851 msgid " -F, --list-free [ ...] list unpartitioned free areas of each device\n" msgstr "" #: disk-utils/sfdisk.c:1852 #, fuzzy msgid " -r, --reorder fix partitions order (by start offset)\n" msgstr " -i, --irq 指定並列埠 irq\n" #: disk-utils/sfdisk.c:1853 #, fuzzy msgid " -s, --show-size [ ...] list sizes of all or specified devices\n" msgstr " -T, --test 測試用於 getopt (1) 版本\n" #: disk-utils/sfdisk.c:1854 #, fuzzy msgid " -T, --list-types print the recognized types (see -X)\n" msgstr " -r, --reset 重置通訊埠\n" #: disk-utils/sfdisk.c:1855 msgid " -V, --verify [ ...] test whether partitions seem correct\n" msgstr "" #: disk-utils/sfdisk.c:1856 msgid " --delete [ ...] delete all or specified partitions\n" msgstr "" #: disk-utils/sfdisk.c:1859 msgid " --part-label [] print or change partition label\n" msgstr "" #: disk-utils/sfdisk.c:1860 msgid " --part-type [] print or change partition type\n" msgstr "" #: disk-utils/sfdisk.c:1861 #, fuzzy #| msgid " -c [or --id]: print or change partition Id" msgid " --part-uuid [] print or change partition uuid\n" msgstr " -c [或 --id]： 印出或變更分割區識別號" #: disk-utils/sfdisk.c:1862 msgid " --part-attrs [] print or change partition attributes\n" msgstr "" #: disk-utils/sfdisk.c:1865 #, fuzzy msgid " device (usually disk) path\n" msgstr " -h 顯示這份說明然後離開\n" #: disk-utils/sfdisk.c:1866 #, fuzzy #| msgid " -N# : change only the partition with number #" msgid " partition number\n" msgstr " -N# ： 只變更編號為 # 的分割區" #: disk-utils/sfdisk.c:1867 msgid " partition type, GUID for GPT, hex for MBR\n" msgstr "" #: disk-utils/sfdisk.c:1870 #, fuzzy msgid " -a, --append append partitions to existing partition table\n" msgstr " -i, --irq 指定並列埠 irq\n" #: disk-utils/sfdisk.c:1871 #, fuzzy msgid " -b, --backup backup partition table sectors (see -O)\n" msgstr " -n, --noparity 設定同位到無\n" #: disk-utils/sfdisk.c:1872 msgid " --bytes print SIZE in bytes rather than in human readable format\n" msgstr "" #: disk-utils/sfdisk.c:1873 msgid " --move-data[=] move partition data after relocation (requires -N)\n" msgstr "" #: disk-utils/sfdisk.c:1874 #, fuzzy #| msgid "You can disable all consistency checking with:" msgid " -f, --force disable all consistency checking\n" msgstr "您可以停用所有的一致性檢查藉由：" #: disk-utils/sfdisk.c:1875 msgid " --color[=] colorize output (auto, always or never)\n" msgstr "" #: disk-utils/sfdisk.c:1878 #, fuzzy msgid " -N, --partno specify partition number\n" msgstr " -i, --irq 指定並列埠 irq\n" #: disk-utils/sfdisk.c:1879 #, fuzzy msgid " -n, --no-act do everything except write to device\n" msgstr " -n, --noparity 設定同位到無\n" #: disk-utils/sfdisk.c:1880 #, fuzzy msgid " --no-reread do not check whether the device is in use\n" msgstr " -c 清空螢幕之前顯示\n" #: disk-utils/sfdisk.c:1881 msgid " --no-tell-kernel do not tell kernel about changes\n" msgstr "" #: disk-utils/sfdisk.c:1882 msgid " -O, --backup-file override default backup file name\n" msgstr "" #: disk-utils/sfdisk.c:1883 #, fuzzy msgid " -o, --output output columns\n" msgstr " -o, --options 短選項為辨識的\n" #: disk-utils/sfdisk.c:1884 #, fuzzy #| msgid " -q [or --quiet]: suppress warning messages" msgid " -q, --quiet suppress extra info messages\n" msgstr " -q [或 --quiet]： 抑制警告訊息" #: disk-utils/sfdisk.c:1885 msgid " -w, --wipe wipe signatures (auto, always or never)\n" msgstr "" #: disk-utils/sfdisk.c:1887 #, fuzzy msgid " -X, --label specify label type (dos, gpt, ...)\n" msgstr " -i, --irq 指定並列埠 irq\n" #: disk-utils/sfdisk.c:1888 msgid " -Y, --label-nested specify nested label type (dos, bsd)\n" msgstr "" #: disk-utils/sfdisk.c:1890 msgid " -G, --show-pt-geometry deprecated, alias to --show-geometry\n" msgstr "" #: disk-utils/sfdisk.c:1891 #, fuzzy msgid " -L, --Linux deprecated, only for backward compatibility\n" msgstr " -i, --info 列印只有資訊關於取樣步驟\n" #: disk-utils/sfdisk.c:1892 #, fuzzy msgid " -u, --unit S deprecated, only sector unit is supported\n" msgstr " -i, --info 列印只有資訊關於取樣步驟\n" #: disk-utils/sfdisk.c:2010 #, c-format msgid "%s is deprecated in favour of --part-type" msgstr "" #: disk-utils/sfdisk.c:2015 msgid "--id is deprecated in favour of --part-type" msgstr "" #: disk-utils/sfdisk.c:2031 msgid "--show-pt-geometry is no more implemented. Using --show-geometry." msgstr "" #: disk-utils/sfdisk.c:2043 msgid "--Linux option is unnecessary and deprecated" msgstr "" #: disk-utils/sfdisk.c:2072 #, fuzzy, c-format msgid "unsupported unit '%c'" msgstr "不受支援的引數：%s" #: disk-utils/sfdisk.c:2075 include/c.h:336 #, c-format msgid "%s from %s\n" msgstr "%s 來自 %s\n" #: disk-utils/sfdisk.c:2152 msgid "--movedata requires -N" msgstr "" #: disk-utils/swaplabel.c:74 #, c-format msgid "failed to parse UUID: %s" msgstr "剖析 UUID 時失敗：%s" #: disk-utils/swaplabel.c:78 #, c-format msgid "%s: failed to seek to swap UUID" msgstr "%s：無法尋指到交換 UUID" #: disk-utils/swaplabel.c:82 #, c-format msgid "%s: failed to write UUID" msgstr "%s：無法寫入 UUID" #: disk-utils/swaplabel.c:93 #, c-format msgid "%s: failed to seek to swap label " msgstr "%s：無法尋指到交換標籤 " #: disk-utils/swaplabel.c:100 #, c-format msgid "label is too long. Truncating it to '%s'" msgstr "標籤太長。將它截斷為「%s」" #: disk-utils/swaplabel.c:103 #, c-format msgid "%s: failed to write label" msgstr "%s：無法寫入標籤" #: disk-utils/swaplabel.c:127 msgid "Display or change the label or UUID of a swap area.\n" msgstr "" #: disk-utils/swaplabel.c:130 #, fuzzy msgid "" " -L, --label