# traditional Chinese translation of wget. # Copyright (C) 1998, 2000, 01, 02, 05 Free Software Foundation, Inc. # CD Chen , 1998. # Pofeng Lee , 1998. # Jing-Jong Shyue , 2000. # Abel Cheung , 2001-2002, 2005. # msgid "" msgstr "" "Project-Id-Version: wget 1.10.1-b1\n" "Report-Msgid-Bugs-To: bug-wget@gnu.org\n" "POT-Creation-Date: 2016-06-09 18:13+0200\n" "PO-Revision-Date: 2005-08-17 13:30+0800\n" "Last-Translator: Abel Cheung \n" "Language-Team: Chinese (traditional) \n" "Language: zh_TW\n" "X-Bugs: Report translation errors to the Language-Team address.\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" #: lib/error.c:191 #, fuzzy #| msgid "Unknown error" msgid "Unknown system error" msgstr "錯誤原因不明" #: lib/gai_strerror.c:57 #, fuzzy #| msgid "IPv6 addresses not supported" msgid "Address family for hostname not supported" msgstr "不支援 IPv6 位址" #: lib/gai_strerror.c:58 src/host.c:377 msgid "Temporary failure in name resolution" msgstr "暫時無法檢索主機名稱" #: lib/gai_strerror.c:59 msgid "Bad value for ai_flags" msgstr "" #: lib/gai_strerror.c:60 #, fuzzy #| msgid "Temporary failure in name resolution" msgid "Non-recoverable failure in name resolution" msgstr "暫時無法檢索主機名稱" #: lib/gai_strerror.c:61 msgid "ai_family not supported" msgstr "" #: lib/gai_strerror.c:62 msgid "Memory allocation failure" msgstr "" #: lib/gai_strerror.c:63 msgid "No address associated with hostname" msgstr "" #: lib/gai_strerror.c:64 msgid "Name or service not known" msgstr "" #: lib/gai_strerror.c:65 msgid "Servname not supported for ai_socktype" msgstr "" #: lib/gai_strerror.c:66 #, fuzzy #| msgid "IPv6 addresses not supported" msgid "ai_socktype not supported" msgstr "不支援 IPv6 位址" #: lib/gai_strerror.c:67 #, fuzzy #| msgid "No error" msgid "System error" msgstr "沒有錯誤" #: lib/gai_strerror.c:68 msgid "Argument buffer too small" msgstr "" #: lib/gai_strerror.c:70 msgid "Processing request in progress" msgstr "" #: lib/gai_strerror.c:71 msgid "Request canceled" msgstr "" #: lib/gai_strerror.c:72 msgid "Request not canceled" msgstr "" #: lib/gai_strerror.c:73 msgid "All requests done" msgstr "" #: lib/gai_strerror.c:74 msgid "Interrupted by a signal" msgstr "" #: lib/gai_strerror.c:75 msgid "Parameter string not correctly encoded" msgstr "" #: lib/gai_strerror.c:87 src/host.c:379 msgid "Unknown error" msgstr "錯誤原因不明" #: lib/getopt.c:575 lib/getopt.c:604 #, fuzzy, c-format #| msgid "%s: option `%s' is ambiguous\n" msgid "%s: option '%s' is ambiguous; possibilities:" msgstr "%s: 選項‘%s’不明確\n" #: lib/getopt.c:619 #, fuzzy, c-format #| msgid "%s: option `%s' is ambiguous\n" msgid "%s: option '%s' is ambiguous\n" msgstr "%s: 選項‘%s’不明確\n" #: lib/getopt.c:654 lib/getopt.c:658 #, fuzzy, c-format #| msgid "%s: option `--%s' doesn't allow an argument\n" msgid "%s: option '--%s' doesn't allow an argument\n" msgstr "%s: 選項‘--%s’不可配合引數使用\n" #: lib/getopt.c:667 lib/getopt.c:672 #, fuzzy, c-format #| msgid "%s: option `%c%s' doesn't allow an argument\n" msgid "%s: option '%c%s' doesn't allow an argument\n" msgstr "%s: 選項‘%c%s’不可配合引數使用\n" #: lib/getopt.c:715 lib/getopt.c:734 #, fuzzy, c-format #| msgid "%s: option `%s' requires an argument\n" msgid "%s: option '--%s' requires an argument\n" msgstr "%s: 選項‘%s’需要引數\n" #: lib/getopt.c:772 lib/getopt.c:775 #, fuzzy, c-format #| msgid "%s: unrecognized option `--%s'\n" msgid "%s: unrecognized option '--%s'\n" msgstr "%s: 無法識別選項‘--%s’\n" #: lib/getopt.c:783 lib/getopt.c:786 #, fuzzy, c-format #| msgid "%s: unrecognized option `%c%s'\n" msgid "%s: unrecognized option '%c%s'\n" msgstr "%s: 無法識別選項‘%c%s’\n" #: lib/getopt.c:835 lib/getopt.c:838 #, fuzzy, c-format #| msgid "%s: invalid option -- %c\n" msgid "%s: invalid option -- '%c'\n" msgstr "%s: 選項無效 ─ %c\n" #: lib/getopt.c:891 lib/getopt.c:908 lib/getopt.c:1118 lib/getopt.c:1136 #, fuzzy, c-format #| msgid "%s: option requires an argument -- %c\n" msgid "%s: option requires an argument -- '%c'\n" msgstr "%s: 選項需要引數 ─ %c\n" #: lib/getopt.c:964 lib/getopt.c:980 #, fuzzy, c-format #| msgid "%s: option `-W %s' is ambiguous\n" msgid "%s: option '-W %s' is ambiguous\n" msgstr "%s: 選項‘-W %s’不明確\n" #: lib/getopt.c:1004 lib/getopt.c:1022 #, fuzzy, c-format #| msgid "%s: option `-W %s' doesn't allow an argument\n" msgid "%s: option '-W %s' doesn't allow an argument\n" msgstr "%s: 選項‘-W %s’不可配合引數使用\n" #: lib/getopt.c:1043 lib/getopt.c:1061 #, fuzzy, c-format #| msgid "%s: option `%s' requires an argument\n" msgid "%s: option '-W %s' requires an argument\n" msgstr "%s: 選項‘%s’需要引數\n" #. TRANSLATORS: #. Get translations for open and closing quotation marks. #. The message catalog should translate "`" to a left #. quotation mark suitable for the locale, and similarly for #. "'". For example, a French Unicode local should translate #. these to U+00AB (LEFT-POINTING DOUBLE ANGLE #. QUOTATION MARK), and U+00BB (RIGHT-POINTING DOUBLE ANGLE #. QUOTATION MARK), respectively. #. #. If the catalog has no translation, we will try to #. use Unicode U+2018 (LEFT SINGLE QUOTATION MARK) and #. Unicode U+2019 (RIGHT SINGLE QUOTATION MARK). If the #. current locale is not Unicode, locale_quoting_style #. will quote 'like this', and clocale_quoting_style will #. quote "like this". You should always include translations #. for "`" and "'" even if U+2018 and U+2019 are appropriate #. for your locale. #. #. If you don't know what to put here, please see #. #. and use glyphs suitable for your language. #: lib/quotearg.c:347 msgid "`" msgstr "" #: lib/quotearg.c:348 msgid "'" msgstr "" #: lib/regcomp.c:135 msgid "Success" msgstr "" #: lib/regcomp.c:138 msgid "No match" msgstr "" #: lib/regcomp.c:141 msgid "Invalid regular expression" msgstr "" #: lib/regcomp.c:144 msgid "Invalid collation character" msgstr "" #: lib/regcomp.c:147 #, fuzzy #| msgid "Invalid host name" msgid "Invalid character class name" msgstr "主機名稱無效" #: lib/regcomp.c:150 msgid "Trailing backslash" msgstr "" #: lib/regcomp.c:153 #, fuzzy #| msgid "Invalid user name" msgid "Invalid back reference" msgstr "用戶名稱無效" #: lib/regcomp.c:156 msgid "Unmatched [ or [^" msgstr "" #: lib/regcomp.c:159 msgid "Unmatched ( or \\(" msgstr "" #: lib/regcomp.c:162 msgid "Unmatched \\{" msgstr "" #: lib/regcomp.c:165 msgid "Invalid content of \\{\\}" msgstr "" #: lib/regcomp.c:168 #, fuzzy #| msgid "Invalid user name" msgid "Invalid range end" msgstr "用戶名稱無效" #: lib/regcomp.c:171 msgid "Memory exhausted" msgstr "" #: lib/regcomp.c:174 msgid "Invalid preceding regular expression" msgstr "" #: lib/regcomp.c:177 msgid "Premature end of regular expression" msgstr "" #: lib/regcomp.c:180 msgid "Regular expression too big" msgstr "" #: lib/regcomp.c:183 msgid "Unmatched ) or \\)" msgstr "" #: lib/regcomp.c:711 msgid "No previous regular expression" msgstr "" #: lib/spawn-pipe.c:135 lib/spawn-pipe.c:138 lib/spawn-pipe.c:259 #: lib/spawn-pipe.c:262 #, c-format msgid "cannot create pipe" msgstr "" #: lib/spawn-pipe.c:229 lib/spawn-pipe.c:343 lib/wait-process.c:282 #: lib/wait-process.c:356 #, c-format msgid "%s subprocess failed" msgstr "" #: lib/w32spawn.h:43 #, c-format msgid "_open_osfhandle failed" msgstr "" #: lib/w32spawn.h:84 #, c-format msgid "cannot restore fd %d: dup2 failed" msgstr "" #: lib/wait-process.c:223 lib/wait-process.c:255 lib/wait-process.c:317 #, c-format msgid "%s subprocess" msgstr "" #: lib/wait-process.c:274 lib/wait-process.c:346 #, c-format msgid "%s subprocess got fatal signal %d" msgstr "" #: lib/xalloc-die.c:34 msgid "memory exhausted" msgstr "" #: src/connect.c:205 #, fuzzy, c-format #| msgid "%s: unable to resolve bind address `%s'; disabling bind.\n" msgid "%s: unable to resolve bind address %s; disabling bind.\n" msgstr "%s: 無法解析位址 ‘%s’；不使用 bind。\n" #: src/connect.c:289 #, c-format msgid "Connecting to %s|%s|:%d... " msgstr "正在連接 %s|%s|:%d... " #: src/connect.c:297 #, c-format msgid "Connecting to %s:%d... " msgstr "正在連接 %s:%d... " #: src/connect.c:300 #, fuzzy, c-format #| msgid "Connecting to %s:%d... " msgid "Connecting to [%s]:%d... " msgstr "正在連接 %s:%d... " #: src/connect.c:362 msgid "connected.\n" msgstr "連上了。\n" #: src/connect.c:381 src/host.c:923 src/host.c:961 #, c-format msgid "failed: %s.\n" msgstr "失敗: %s。\n" #: src/connect.c:405 src/http.c:2044 #, fuzzy, c-format #| msgid "%s: unable to resolve bind address `%s'; disabling bind.\n" msgid "%s: unable to resolve host address %s\n" msgstr "%s: 無法解析位址 ‘%s’；不使用 bind。\n" #: src/convert.c:198 #, fuzzy, c-format #| msgid "Converted %d files in %.*f seconds.\n" msgid "Converted links in %d files in %s seconds.\n" msgstr "已在 %3$.*2$f 秒之內轉換了 %1$d 個檔案。\n" #: src/convert.c:227 #, fuzzy, c-format #| msgid "Converting %s... " msgid "Converting links in %s... " msgstr "正在轉換 %s... " #: src/convert.c:240 msgid "nothing to do.\n" msgstr "不需進行任何操作。\n" #: src/convert.c:248 src/convert.c:272 #, c-format msgid "Cannot convert links in %s: %s\n" msgstr "無法轉換 %s 中的鏈結: %s\n" #: src/convert.c:263 #, fuzzy, c-format #| msgid "Unable to delete `%s': %s\n" msgid "Unable to delete %s: %s\n" msgstr "無法刪除‘%s’: %s\n" #: src/convert.c:578 #, c-format msgid "Cannot back up %s as %s: %s\n" msgstr "無法將 %s 備份成 %s: %s\n" #: src/cookies.c:310 #, fuzzy, c-format #| msgid "Unable to delete `%s': %s\n" msgid "Unable to get cookie for %s\n" msgstr "無法刪除‘%s’: %s\n" #: src/cookies.c:457 #, c-format msgid "Syntax error in Set-Cookie: %s at position %d.\n" msgstr "Set-Cookie 出現語法錯誤: 在 %2$d 位置的 %1$s。\n" #: src/cookies.c:739 #, fuzzy, c-format #| msgid "Cookie coming from %s attempted to set domain to %s\n" msgid "Cookie coming from %s attempted to set domain to " msgstr "來自 %s 的 cookie 嘗試將網域設定為 %s\n" #: src/cookies.c:742 src/spider.c:92 #, c-format msgid "%s\n" msgstr "" #: src/cookies.c:1190 src/cookies.c:1311 #, fuzzy, c-format #| msgid "Cannot open cookies file `%s': %s\n" msgid "Cannot open cookies file %s: %s\n" msgstr "無法開啟 cookie 檔‘%s’: %s\n" #: src/cookies.c:1348 #, fuzzy, c-format #| msgid "Error writing to `%s': %s\n" msgid "Error writing to %s: %s\n" msgstr "寫入‘%s’時發生錯誤: %s\n" #: src/cookies.c:1351 #, fuzzy, c-format #| msgid "Error closing `%s': %s\n" msgid "Error closing %s: %s\n" msgstr "關閉‘%s’時發生錯誤: %s\n" #: src/ftp-ls.c:1050 msgid "Unsupported listing type, trying Unix listing parser.\n" msgstr "使用了不支援的檔案清單類型，假設是 Unix 格式的清單來分析。\n" #: src/ftp-ls.c:1101 src/ftp-ls.c:1103 #, c-format msgid "Index of /%s on %s:%d" msgstr "/%s 的索引，在 %s:%d" #: src/ftp-ls.c:1128 #, c-format msgid "time unknown " msgstr "時間不詳 " #: src/ftp-ls.c:1132 #, c-format msgid "File " msgstr "檔案 " #: src/ftp-ls.c:1135 #, c-format msgid "Directory " msgstr "目錄 " #: src/ftp-ls.c:1138 #, c-format msgid "Link " msgstr "鏈結 " #: src/ftp-ls.c:1141 #, c-format msgid "Not sure " msgstr "無法確定 " #: src/ftp-ls.c:1164 #, c-format msgid " (%s bytes)" msgstr " (%s 位元組)" #: src/ftp.c:223 #, c-format msgid "Length: %s" msgstr "長度: %s" #: src/ftp.c:229 src/http.c:3679 #, c-format msgid ", %s (%s) remaining" msgstr "，剩餘 %s (%s)" #: src/ftp.c:233 src/http.c:3683 #, c-format msgid ", %s remaining" msgstr "，剩餘 %s" #: src/ftp.c:236 msgid " (unauthoritative)\n" msgstr " (非正式資料)\n" #: src/ftp.c:378 msgid "Could not initialize SSL. It will be disabled." msgstr "" #: src/ftp.c:460 #, c-format msgid "Logging in as %s ... " msgstr "以 %s 的身分登入... " #: src/ftp.c:479 src/ftp.c:565 src/ftp.c:632 src/ftp.c:697 src/ftp.c:931 #: src/ftp.c:984 src/ftp.c:1031 src/ftp.c:1094 src/ftp.c:1155 src/ftp.c:1246 #: src/ftp.c:1296 msgid "Error in server response, closing control connection.\n" msgstr "伺服器回應訊息發生錯誤，會關閉控制連線。\n" #: src/ftp.c:486 msgid "Error in server greeting.\n" msgstr "伺服器訊息出現錯誤。\n" #: src/ftp.c:493 src/ftp.c:705 src/ftp.c:939 src/ftp.c:1039 src/ftp.c:1104 #: src/ftp.c:1165 src/ftp.c:1256 src/ftp.c:1306 msgid "Write failed, closing control connection.\n" msgstr "無法寫入，會關閉控制連線。\n" #: src/ftp.c:499 msgid "The server refuses login.\n" msgstr "伺服器拒絕登入。\n" #: src/ftp.c:505 msgid "Login incorrect.\n" msgstr "登入錯誤。\n" #: src/ftp.c:511 msgid "Logged in!\n" msgstr "登入完成！\n" #: src/ftp.c:531 msgid "Server did not accept the 'PBSZ 0' command.\n" msgstr "" #: src/ftp.c:541 #, c-format msgid "Server did not accept the 'PROT %c' command.\n" msgstr "" #: src/ftp.c:573 msgid "Server error, can't determine system type.\n" msgstr "伺服器錯誤，無法決定作業系統的類型。\n" #: src/ftp.c:582 src/ftp.c:1074 src/ftp.c:1138 src/ftp.c:1181 msgid "done. " msgstr "完成。 " #: src/ftp.c:685 src/ftp.c:957 src/ftp.c:1001 src/ftp.c:1276 src/ftp.c:1325 msgid "done.\n" msgstr "完成。\n" #: src/ftp.c:712 #, c-format msgid "Unknown type `%c', closing control connection.\n" msgstr "類別 ‘%c’ 不詳，會關閉控制連線。\n" #: src/ftp.c:724 msgid "done. " msgstr "完成。 " #: src/ftp.c:730 msgid "==> CWD not needed.\n" msgstr "==> 不需要 CWD (切換路徑)。\n" #: src/ftp.c:914 msgid "Logically impossible section reached in getftp()" msgstr "" #: src/ftp.c:915 #, c-format msgid "" "cwd_count: %d\n" "cwd_start: %d\n" "cwd_end: %d\n" msgstr "" #: src/ftp.c:945 #, fuzzy, c-format #| msgid "" #| "No such directory `%s'.\n" #| "\n" msgid "" "No such directory %s.\n" "\n" msgstr "" "目錄‘%s’不存在。\n" "\n" #: src/ftp.c:966 msgid "==> CWD not required.\n" msgstr "==> 不需要 CWD (切換路徑)。\n" #: src/ftp.c:1009 #, fuzzy #| msgid "File `%s' already there; not retrieving.\n" msgid "File has already been retrieved.\n" msgstr "檔案 ‘%s’ 已存在，不會下載。\n" #: src/ftp.c:1045 msgid "Cannot initiate PASV transfer.\n" msgstr "無法初始化 PASV 檔案傳送方式。\n" #: src/ftp.c:1049 msgid "Cannot parse PASV response.\n" msgstr "無法分析 PASV 回應訊息。\n" #: src/ftp.c:1066 #, c-format msgid "couldn't connect to %s port %d: %s\n" msgstr "無法連上 %s 的埠號 %d: %s\n" #: src/ftp.c:1120 #, c-format msgid "Bind error (%s).\n" msgstr "Bind 發生錯誤(%s)。\n" #: src/ftp.c:1126 msgid "Invalid PORT.\n" msgstr "PORT 指令無效。\n" #: src/ftp.c:1172 msgid "" "\n" "REST failed, starting from scratch.\n" msgstr "" "\n" "重設 (REST) 失敗，需要重新開始傳送。\n" #: src/ftp.c:1212 #, c-format msgid "File %s exists.\n" msgstr "" #: src/ftp.c:1218 #, fuzzy, c-format #| msgid "" #| "No such file `%s'.\n" #| "\n" msgid "No such file %s.\n" msgstr "" "檔案‘%s’不存在。\n" "\n" #: src/ftp.c:1264 #, fuzzy, c-format #| msgid "" #| "No such file `%s'.\n" #| "\n" msgid "" "No such file %s.\n" "\n" msgstr "" "檔案‘%s’不存在。\n" "\n" #: src/ftp.c:1314 #, fuzzy, c-format #| msgid "" #| "No such file or directory `%s'.\n" #| "\n" msgid "" "No such file or directory %s.\n" "\n" msgstr "" "檔案或目錄‘%s’不存在。\n" "\n" #: src/ftp.c:1473 src/http.c:2483 #, c-format msgid "%s has sprung into existence.\n" msgstr "%s 突然出現。\n" #: src/ftp.c:1557 #, c-format msgid "%s: %s, closing control connection.\n" msgstr "%s: %s，將會關閉控制連線。\n" #: src/ftp.c:1569 #, c-format msgid "%s (%s) - Data connection: %s; " msgstr "%s (%s) ─ 數據連線: %s；" #: src/ftp.c:1584 msgid "Control connection closed.\n" msgstr "已關閉控制連線。\n" #: src/ftp.c:1602 msgid "Data transfer aborted.\n" msgstr "已中止傳送資料。\n" #: src/ftp.c:1826 #, fuzzy, c-format #| msgid "File `%s' already there; not retrieving.\n" msgid "File %s already there; not retrieving.\n" msgstr "檔案 ‘%s’ 已存在，不會下載。\n" #: src/ftp.c:1911 src/http.c:3919 #, c-format msgid "(try:%2d)" msgstr "(嘗試第 %2d 次)" #: src/ftp.c:1999 src/http.c:4328 #, fuzzy, c-format #| msgid "" #| "%s (%s) - `%s' saved [%s/%s]\n" #| "\n" msgid "" "%s (%s) - written to stdout %s[%s]\n" "\n" msgstr "" "%s (%s) -- 已儲存 ‘%s’ [%s/%s])\n" "\n" #: src/ftp.c:2000 src/http.c:4329 #, fuzzy, c-format #| msgid "" #| "%s (%s) - `%s' saved [%s]\n" #| "\n" msgid "" "%s (%s) - %s saved [%s]\n" "\n" msgstr "" "%s (%s) - 已儲存‘%s’ [%s]\n" "\n" #: src/ftp.c:2060 src/main.c:1954 src/metalink.c:423 src/recur.c:501 #: src/recur.c:736 src/retr.c:1148 #, c-format msgid "Removing %s.\n" msgstr "刪除 %s。\n" #: src/ftp.c:2114 #, fuzzy, c-format #| msgid "Using `%s' as listing tmp file.\n" msgid "Using %s as listing tmp file.\n" msgstr "使用‘%s’作為檔案清單暫存檔。\n" #: src/ftp.c:2131 #, fuzzy, c-format #| msgid "Removed `%s'.\n" msgid "Removed %s.\n" msgstr "已刪除‘%s’。\n" #: src/ftp.c:2171 #, c-format msgid "Recursion depth %d exceeded max. depth %d.\n" msgstr "鏈結深度 %d 超過最大值 %d。\n" #: src/ftp.c:2241 #, fuzzy, c-format #| msgid "Remote file no newer than local file `%s' -- not retrieving.\n" msgid "Remote file no newer than local file %s -- not retrieving.\n" msgstr "遠端檔案不比本機檔案‘%s’新 ─ 不會下載。\n" #: src/ftp.c:2249 #, fuzzy, c-format #| msgid "" #| "Remote file is newer than local file `%s' -- retrieving.\n" #| "\n" msgid "" "Remote file is newer than local file %s -- retrieving.\n" "\n" msgstr "遠端檔案較本機檔案‘%s’新 ─ 會下載檔案。\n" #: src/ftp.c:2256 #, c-format msgid "" "The sizes do not match (local %s) -- retrieving.\n" "\n" msgstr "" "檔案大小不符 (本機檔案為 %s) -- 下載檔案。\n" "\n" #: src/ftp.c:2274 msgid "Invalid name of the symlink, skipping.\n" msgstr "略過名稱有誤的符號鏈結。\n" #: src/ftp.c:2291 #, c-format msgid "" "Already have correct symlink %s -> %s\n" "\n" msgstr "" "正確的符號鏈結 %s → %s 已經存在\n" "\n" #: src/ftp.c:2300 #, c-format msgid "Creating symlink %s -> %s\n" msgstr "建立符號鏈結 %s → %s\n" #: src/ftp.c:2310 #, fuzzy, c-format #| msgid "Symlinks not supported, skipping symlink `%s'.\n" msgid "Symlinks not supported, skipping symlink %s.\n" msgstr "本系統不支援符號鏈結，略過符號鏈結‘%s’。\n" #: src/ftp.c:2325 #, fuzzy, c-format #| msgid "Skipping directory `%s'.\n" msgid "Skipping directory %s.\n" msgstr "略過目錄‘%s’。\n" #: src/ftp.c:2337 #, c-format msgid "%s: unknown/unsupported file type.\n" msgstr "%s: 檔案類別不詳或不支援。\n" #: src/ftp.c:2377 #, c-format msgid "%s: corrupt time-stamp.\n" msgstr "%s: 時間標記錯誤。\n" #: src/ftp.c:2401 #, c-format msgid "Will not retrieve dirs since depth is %d (max %d).\n" msgstr "因為深度為 %d (最大值為 %d)，所以不下載。\n" #: src/ftp.c:2452 #, fuzzy, c-format #| msgid "Not descending to `%s' as it is excluded/not-included.\n" msgid "Not descending to %s as it is excluded/not-included.\n" msgstr "不進入‘%s’目錄因為已被排除或不被列入清單中。\n" #: src/ftp.c:2542 src/ftp.c:2556 #, fuzzy, c-format #| msgid "Rejecting `%s'.\n" msgid "Rejecting %s.\n" msgstr "拒絕‘%s’。\n" #: src/ftp.c:2579 #, fuzzy, c-format #| msgid "Error writing to `%s': %s\n" msgid "Error matching %s against %s: %s\n" msgstr "寫入‘%s’時發生錯誤: %s\n" #: src/ftp.c:2635 #, fuzzy, c-format #| msgid "No matches on pattern `%s'.\n" msgid "No matches on pattern %s.\n" msgstr "沒有任何項目符合樣式‘%s’。\n" #: src/ftp.c:2707 #, fuzzy, c-format #| msgid "Wrote HTML-ized index to `%s' [%s].\n" msgid "Wrote HTML-ized index to %s [%s].\n" msgstr "將 HTML 化的索引寫入至 ‘%s’ [%s]。\n" #: src/ftp.c:2712 #, fuzzy, c-format #| msgid "Wrote HTML-ized index to `%s'.\n" msgid "Wrote HTML-ized index to %s.\n" msgstr "將 HTML 化的索引寫入至 ‘%s’。\n" #: src/gnutls.c:115 #, c-format msgid "ERROR: Cannot open directory %s.\n" msgstr "" #: src/gnutls.c:165 #, c-format msgid "ERROR: Failed to open cert %s: (%d).\n" msgstr "" #: src/gnutls.c:170 #, c-format msgid "Loaded CA certificate '%s'\n" msgstr "" #: src/gnutls.c:180 #, c-format msgid "ERROR: Failed to load CRL file '%s': (%d)\n" msgstr "" #: src/gnutls.c:184 #, c-format msgid "Loaded CRL file '%s'\n" msgstr "" #: src/gnutls.c:208 msgid "ERROR: GnuTLS requires the key and the cert to be of the same type.\n" msgstr "" #: src/gnutls.c:602 src/gnutls.c:638 #, c-format msgid "GnuTLS: unimplemented 'secure-protocol' option value %d\n" msgstr "" #: src/gnutls.c:603 src/gnutls.c:639 src/host.c:163 src/openssl.c:253 #, fuzzy #| msgid "Mail bug reports and suggestions to .\n" msgid "Please report this issue to bug-wget@gnu.org\n" msgstr "請將錯誤報告或建議寄給 。\n" #: src/gnutls.c:767 src/openssl.c:761 msgid "ERROR" msgstr "錯誤" #: src/gnutls.c:767 src/openssl.c:761 msgid "WARNING" msgstr "警告" #: src/gnutls.c:778 src/openssl.c:774 #, c-format msgid "%s: No certificate presented by %s.\n" msgstr "%s：%s 沒有提供憑證。\n" #: src/gnutls.c:784 #, fuzzy, c-format #| msgid "%s: No certificate presented by %s.\n" msgid "%s: The certificate of %s is not trusted.\n" msgstr "%s：%s 沒有提供憑證。\n" #: src/gnutls.c:785 #, c-format msgid "%s: The certificate of %s hasn't got a known issuer.\n" msgstr "" #: src/gnutls.c:786 #, fuzzy, c-format #| msgid "%s: No certificate presented by %s.\n" msgid "%s: The certificate of %s has been revoked.\n" msgstr "%s：%s 沒有提供憑證。\n" #: src/gnutls.c:787 #, fuzzy, c-format #| msgid "%s: No certificate presented by %s.\n" msgid "%s: The certificate signer of %s was not a CA.\n" msgstr "%s：%s 沒有提供憑證。\n" #: src/gnutls.c:788 #, c-format msgid "%s: The certificate of %s was signed using an insecure algorithm.\n" msgstr "" #: src/gnutls.c:789 #, c-format msgid "%s: The certificate of %s is not yet activated.\n" msgstr "" #: src/gnutls.c:790 #, fuzzy, c-format #| msgid "%s: No certificate presented by %s.\n" msgid "%s: The certificate of %s has expired.\n" msgstr "%s：%s 沒有提供憑證。\n" #: src/gnutls.c:802 #, c-format msgid "Error initializing X509 certificate: %s\n" msgstr "" #: src/gnutls.c:811 #, fuzzy #| msgid "%s: No certificate presented by %s.\n" msgid "No certificate found\n" msgstr "%s：%s 沒有提供憑證。\n" #: src/gnutls.c:818 #, fuzzy, c-format #| msgid "Error parsing proxy URL %s: %s.\n" msgid "Error parsing certificate: %s\n" msgstr "分析代理伺服器 URL %s 時發生錯誤: %s。\n" #: src/gnutls.c:825 msgid "The certificate has not yet been activated\n" msgstr "" #: src/gnutls.c:830 msgid "The certificate has expired\n" msgstr "" #: src/gnutls.c:837 #, fuzzy, c-format #| msgid "%s: certificate common name `%s' doesn't match requested host name `%s'.\n" msgid "The certificate's owner does not match hostname %s\n" msgstr "%s：憑證的 common name ‘%s’ 和主機名稱 ‘%s’ 不符。\n" #: src/gnutls.c:846 src/openssl.c:970 msgid "The public key does not match pinned public key!\n" msgstr "" #: src/gnutls.c:855 msgid "Certificate must be X.509\n" msgstr "" #: src/host.c:162 msgid "Error in handling the address list.\n" msgstr "" #: src/host.c:373 msgid "Unknown host" msgstr "不明主機" #: src/host.c:858 #, c-format msgid "Resolving %s... " msgstr "正在查找主機 %s... " #: src/host.c:934 msgid "failed: No IPv4/IPv6 addresses for host.\n" msgstr "失敗: 該主機沒有 IPv4/IPv6 地址。\n" #: src/host.c:964 msgid "failed: timed out.\n" msgstr "失敗: 連線逾時。\n" #: src/html-url.c:307 #, c-format msgid "%s: Cannot resolve incomplete link %s.\n" msgstr "%s: 無法解析不完整的符號鏈結 %s。\n" #: src/html-url.c:927 #, c-format msgid "%s: Invalid URL %s: %s\n" msgstr "%s: URL ‘%s’ 無效: %s\n" #: src/http.c:372 #, c-format msgid "Failed writing HTTP request: %s.\n" msgstr "無法寫入 HTTP 要求: %s。\n" #: src/http.c:776 msgid "No headers, assuming HTTP/0.9" msgstr "沒有任何標頭資料，假設為 HTTP/0.9" #: src/http.c:1588 #, fuzzy, c-format #| msgid "" #| "File `%s' already there; not retrieving.\n" #| "\n" msgid "" "File %s already there; not retrieving.\n" "\n" msgstr "" "檔案 ‘%s’ 已存在，不會下載。\n" "\n" #: src/http.c:1795 msgid "gmtime failed. This is probably a bug.\n" msgstr "" #: src/http.c:1856 msgid "Cannot convert timestamp to http format. Falling back to time 0 as last modification time.\n" msgstr "" #: src/http.c:1934 #, fuzzy, c-format #| msgid "POST data file `%s' missing: %s\n" msgid "BODY data file %s missing: %s\n" msgstr "載有 POST 資料的檔案 ‘%s’ 不見了：%s\n" #: src/http.c:2026 #, fuzzy, c-format #| msgid "Reusing existing connection to %s:%d.\n" msgid "Reusing existing connection to [%s]:%d.\n" msgstr "繼續使用和 %s:%d 的連線。\n" #: src/http.c:2031 #, c-format msgid "Reusing existing connection to %s:%d.\n" msgstr "繼續使用和 %s:%d 的連線。\n" #: src/http.c:2097 #, c-format msgid "Failed reading proxy response: %s\n" msgstr "無法讀取代理伺服器回應: %s。\n" #: src/http.c:2116 src/http.c:3191 src/http.c:4122 #, c-format msgid "%s ERROR %d: %s.\n" msgstr "%s 錯誤 %d: %s。\n" #: src/http.c:2118 src/http.c:3193 src/http.c:3392 msgid "Malformed status line" msgstr "不正常的狀態行" #: src/http.c:2129 #, c-format msgid "Proxy tunneling failed: %s" msgstr "無法透過代理伺服器進行 tunneling: %s" #: src/http.c:2357 msgid "Unknown authentication scheme.\n" msgstr "認證方式不詳。\n" #: src/http.c:2375 #, fuzzy, c-format #| msgid "Unknown authentication scheme.\n" msgid "Authentication selected: %s\n" msgstr "認證方式不詳。\n" #: src/http.c:2498 #, c-format msgid "Saving to: %s\n" msgstr "" #: src/http.c:2635 #, c-format msgid "" "When downloading signature:\n" "%s: %s.\n" msgstr "" #: src/http.c:2671 msgid "Unable to read signature content from temporary file. Skipping.\n" msgstr "" #: src/http.c:2694 msgid "Could not create temporary file. Skipping signature download.\n" msgstr "" #: src/http.c:2728 #, c-format msgid "Invalid pri value. Assuming %d.\n" msgstr "" #: src/http.c:2851 msgid "" "Could not find acceptable digest for Metalink resources.\n" "Ignoring them.\n" msgstr "" #: src/http.c:2987 msgid "Disabling SSL due to encountered errors.\n" msgstr "因遇到錯誤而停止使用 SSL。\n" #: src/http.c:3127 #, c-format msgid "%s request sent, awaiting response... " msgstr "已送出 %s 要求，正在等候回應... " #: src/http.c:3167 msgid "No data received.\n" msgstr "收不到資料。\n" #: src/http.c:3173 #, c-format msgid "Read error (%s) in headers.\n" msgstr "讀取標頭時發生錯誤 (%s)。\n" #: src/http.c:3394 msgid "(no description)" msgstr "(沒有任何說明)" #: src/http.c:3494 #, c-format msgid "Location: %s%s\n" msgstr "位置: %s%s\n" #: src/http.c:3495 src/http.c:3689 msgid "unspecified" msgstr "未指定" #: src/http.c:3496 msgid " [following]" msgstr " [跟隨至新的 URL]" #: src/http.c:3595 #, c-format msgid "" "File %s not modified on server. Omitting download.\n" "\n" msgstr "" #: src/http.c:3613 #, c-format msgid "" "Server ignored If-Modified-Since header for file %s.\n" "You might want to add --no-if-modified-since option.\n" "\n" msgstr "" #: src/http.c:3633 msgid "" "\n" " The file is already fully retrieved; nothing to do.\n" "\n" msgstr "" "\n" " 檔案早已下載完成；不會進行任何操作。\n" "\n" #: src/http.c:3669 msgid "Length: " msgstr "長度: " #: src/http.c:3689 msgid "ignored" msgstr "忽略" #: src/http.c:3827 msgid "Warning: wildcards not supported in HTTP.\n" msgstr "警告: HTTP 不支援萬用字元。\n" #: src/http.c:3909 msgid "Spider mode enabled. Check if remote file exists.\n" msgstr "" #: src/http.c:3997 #, fuzzy, c-format #| msgid "Cannot write to `%s' (%s).\n" msgid "Cannot write to %s (%s).\n" msgstr "無法寫入‘%s’(%s)。\n" #: src/http.c:4008 msgid "Required attribute missing from Header received.\n" msgstr "" #: src/http.c:4013 msgid "Username/Password Authentication Failed.\n" msgstr "" #: src/http.c:4019 #, fuzzy #| msgid "Cannot write to `%s' (%s).\n" msgid "Cannot write to WARC file.\n" msgstr "無法寫入‘%s’(%s)。\n" #: src/http.c:4025 msgid "Cannot write to temporary WARC file.\n" msgstr "" #: src/http.c:4030 msgid "Unable to establish SSL connection.\n" msgstr "無法建立 SSL 連線。\n" #: src/http.c:4036 #, fuzzy, c-format #| msgid "Cannot write to `%s' (%s).\n" msgid "Cannot unlink %s (%s).\n" msgstr "無法寫入‘%s’(%s)。\n" #: src/http.c:4046 #, c-format msgid "ERROR: Redirection (%d) without location.\n" msgstr "錯誤: 重新導向 (%d) 但沒有指定位置。\n" #: src/http.c:4068 msgid "Could not find Metalink data in HTTP response. Downloading file using HTTP GET.\n" msgstr "" #: src/http.c:4077 msgid "Metalink headers found. Switching to Metalink mode.\n" msgstr "" #: src/http.c:4117 msgid "Remote file does not exist -- broken link!!!\n" msgstr "" #: src/http.c:4139 msgid "Last-modified header missing -- time-stamps turned off.\n" msgstr "缺少了最後修改時間標頭 ─ 關閉時間標記。\n" #: src/http.c:4147 msgid "Last-modified header invalid -- time-stamp ignored.\n" msgstr "無效的最後修改時間標頭 ─ 忽略時間標記。\n" #: src/http.c:4177 #, fuzzy, c-format #| msgid "" #| "Server file no newer than local file `%s' -- not retrieving.\n" #| "\n" msgid "" "Server file no newer than local file %s -- not retrieving.\n" "\n" msgstr "" "遠端檔案不比本機檔案‘%s’新 ─ 不會下載。\n" "\n" #: src/http.c:4185 #, c-format msgid "The sizes do not match (local %s) -- retrieving.\n" msgstr "檔案大小不符 (本機檔案為 %s) -- 會下載檔案。\n" #: src/http.c:4194 msgid "Remote file is newer, retrieving.\n" msgstr "遠端檔案較新，會下載檔案。\n" #: src/http.c:4212 #, fuzzy #| msgid "" #| "Remote file is newer than local file `%s' -- retrieving.\n" #| "\n" msgid "" "Remote file exists and could contain links to other resources -- retrieving.\n" "\n" msgstr "遠端檔案較本機檔案‘%s’新 ─ 會下載檔案。\n" #: src/http.c:4218 #, fuzzy #| msgid "Remote file no newer than local file `%s' -- not retrieving.\n" msgid "" "Remote file exists but does not contain any link -- not retrieving.\n" "\n" msgstr "遠端檔案不比本機檔案‘%s’新 ─ 不會下載。\n" #: src/http.c:4227 msgid "" "Remote file exists and could contain further links,\n" "but recursion is disabled -- not retrieving.\n" "\n" msgstr "" #: src/http.c:4233 #, fuzzy #| msgid "Remote file is newer, retrieving.\n" msgid "" "Remote file exists.\n" "\n" msgstr "遠端檔案較新，會下載檔案。\n" #: src/http.c:4242 #, fuzzy, c-format #| msgid "%s: Invalid URL %s: %s\n" msgid "%s URL: %s %2d %s\n" msgstr "%s: URL ‘%s’ 無效: %s\n" #: src/http.c:4292 #, fuzzy, c-format #| msgid "" #| "%s (%s) - `%s' saved [%s/%s]\n" #| "\n" msgid "" "%s (%s) - written to stdout %s[%s/%s]\n" "\n" msgstr "" "%s (%s) -- 已儲存 ‘%s’ [%s/%s])\n" "\n" #: src/http.c:4293 #, fuzzy, c-format #| msgid "" #| "%s (%s) - `%s' saved [%s/%s]\n" #| "\n" msgid "" "%s (%s) - %s saved [%s/%s]\n" "\n" msgstr "" "%s (%s) -- 已儲存 ‘%s’ [%s/%s])\n" "\n" #: src/http.c:4354 #, c-format msgid "%s (%s) - Connection closed at byte %s. " msgstr "%s (%s) - 在 %s 位元組後連線突然中斷。 " #: src/http.c:4377 #, c-format msgid "%s (%s) - Read error at byte %s (%s)." msgstr "%s (%s) - 讀取至 %s 位元組時發生錯誤 (%s)。" #: src/http.c:4386 #, c-format msgid "%s (%s) - Read error at byte %s/%s (%s). " msgstr "%s (%s) - 讀取至 %s/%s 位元組時發生錯誤 (%s)。" #: src/http.c:4621 #, c-format msgid "Unsupported quality of protection '%s'.\n" msgstr "" #: src/http.c:4626 #, fuzzy, c-format #| msgid "Unsupported scheme" msgid "Unsupported algorithm '%s'.\n" msgstr "不支援這種 URL 格式" #: src/init.c:552 #, c-format msgid "%s: WGETRC points to %s, which doesn't exist.\n" msgstr "%s: WGETRC 位置為 %s，但該檔案不存在。\n" #: src/init.c:653 src/netrc.c:246 #, c-format msgid "%s: Cannot read %s (%s).\n" msgstr "%s: 無法讀取 %s (%s)。\n" #: src/init.c:670 #, c-format msgid "%s: Error in %s at line %d.\n" msgstr "%1$s: 錯誤發生於第 %3$d 行的 %2$s。\n" #: src/init.c:676 #, c-format msgid "%s: Syntax error in %s at line %d.\n" msgstr "%1$s: 錯誤發生於第 %3$d 行的 %2$s。\n" #: src/init.c:681 #, fuzzy, c-format #| msgid "%s: Unknown command `%s' in %s at line %d.\n" msgid "%s: Unknown command %s in %s at line %d.\n" msgstr "%1$s: 第 %4$d 行的 %3$s 出現不明指令 ‘%2$s’。\n" #: src/init.c:718 #, c-format msgid "" "Parsing system wgetrc file (env SYSTEM_WGETRC) failed. Please check\n" "'%s',\n" "or specify a different file using --config.\n" msgstr "" #: src/init.c:733 #, c-format msgid "" "Parsing system wgetrc file failed. Please check\n" "'%s',\n" "or specify a different file using --config.\n" msgstr "" #: src/init.c:749 #, fuzzy, c-format #| msgid "%s: Warning: Both system and user wgetrc point to `%s'.\n" msgid "%s: Warning: Both system and user wgetrc point to %s.\n" msgstr "%s: 警告: 系統與使用者的 wgetrc 都指向‘%s’。\n" #: src/init.c:939 #, fuzzy, c-format #| msgid "%s: Invalid --execute command `%s'\n" msgid "%s: Invalid --execute command %s\n" msgstr "%s: --execute 指令 ‘%s’ 無效\n" #: src/init.c:1000 #, fuzzy, c-format #| msgid "%s: %s: Invalid boolean `%s'; use `on' or `off'.\n" msgid "%s: %s: Invalid boolean %s; use `on' or `off'.\n" msgstr "%s: %s: 邏輯值 ‘%s’ 無效，請使用 ‘on’ 或 ‘off’。\n" #: src/init.c:1033 #, fuzzy, c-format #| msgid "%s: %s: Invalid boolean `%s'; use `on' or `off'.\n" msgid "%s: %s: Invalid %s; use `on', `off' or `quiet'.\n" msgstr "%s: %s: 邏輯值 ‘%s’ 無效，請使用 ‘on’ 或 ‘off’。\n" #: src/init.c:1051 #, fuzzy, c-format #| msgid "%s: %s: Invalid number `%s'.\n" msgid "%s: %s: Invalid number %s.\n" msgstr "%s: %s: 數值 ‘%s’ 無效。\n" #: src/init.c:1132 #, c-format msgid "%s: %s must only be used once\n" msgstr "" #: src/init.c:1287 src/init.c:1306 #, fuzzy, c-format #| msgid "%s: %s: Invalid byte value `%s'\n" msgid "%s: %s: Invalid byte value %s\n" msgstr "%s: %s: 位元值 ‘%s’ 無效。\n" #: src/init.c:1331 #, fuzzy, c-format #| msgid "%s: %s: Invalid time period `%s'\n" msgid "%s: %s: Invalid time period %s\n" msgstr "%s: %s: 時間 ‘%s’ 無效。\n" #: src/init.c:1385 src/init.c:1496 src/init.c:1552 src/init.c:1618 #: src/init.c:1637 src/init.c:1662 #, fuzzy, c-format #| msgid "%s: %s: Invalid value `%s'.\n" msgid "%s: %s: Invalid value %s.\n" msgstr "%s: %s: 數值 ‘%s’ 無效。\n" #: src/init.c:1422 #, fuzzy, c-format #| msgid "%s: %s: Invalid header `%s'.\n" msgid "%s: %s: Invalid header %s.\n" msgstr "%s: %s: 標頭內容 ‘%s’ 無效。\n" #: src/init.c:1443 #, fuzzy, c-format #| msgid "%s: %s: Invalid header `%s'.\n" msgid "%s: %s: Invalid WARC header %s.\n" msgstr "%s: %s: 標頭內容 ‘%s’ 無效。\n" #: src/init.c:1509 #, fuzzy, c-format #| msgid "%s: %s: Invalid progress type `%s'.\n" msgid "%s: %s: Invalid progress type %s.\n" msgstr "%s: %s: 無效的進度指示方式‘%s’。\n" #: src/init.c:1591 #, fuzzy, c-format #| msgid "%s: %s: Invalid restriction `%s', use `unix' or `windows'.\n" msgid "" "%s: %s: Invalid restriction %s,\n" " use [unix|vms|windows],[lowercase|uppercase],[nocontrol],[ascii].\n" msgstr "%s: %s: 作業系統類型 ‘%s’ 無效，請使用 unix 或 windows。\n" #: src/iri.c:107 #, c-format msgid "Encoding %s isn't valid\n" msgstr "" #: src/iri.c:132 src/url.c:1559 #, c-format msgid "Conversion from %s to %s isn't supported\n" msgstr "" #: src/iri.c:172 src/url.c:1585 msgid "Incomplete or invalid multibyte sequence encountered\n" msgstr "" #: src/iri.c:191 src/url.c:1599 #, c-format msgid "Unhandled errno %d\n" msgstr "" #: src/iri.c:219 msgid "locale_to_utf8: locale is unset\n" msgstr "" #: src/iri.c:295 #, fuzzy, c-format #| msgid "%s: Invalid URL %s: %s\n" msgid "Invalid UTF-8 sequence: %s\n" msgstr "%s: URL ‘%s’ 無效: %s\n" #: src/iri.c:307 #, c-format msgid "idn_encode failed (%d): %s\n" msgstr "" #: src/iri.c:326 #, c-format msgid "idn_decode failed (%d): %s\n" msgstr "" #: src/log.c:895 #, fuzzy, c-format #| msgid "" #| "\n" #| "%s received, redirecting output to `%s'.\n" msgid "" "\n" "%s received, redirecting output to %s.\n" msgstr "" "\n" "下載 %s 完畢，將輸出導向至‘%s’。\n" #: src/log.c:905 #, c-format msgid "" "\n" "%s received.\n" msgstr "" "\n" "下載 %s 完畢。\n" #: src/log.c:906 #, c-format msgid "%s: %s; disabling logging.\n" msgstr "%s: %s；無法進行任何記錄。\n" #: src/main.c:545 #, c-format msgid "Usage: %s [OPTION]... [URL]...\n" msgstr "用法: %s [選項]... [URL]...\n" #: src/main.c:557 msgid "" "Mandatory arguments to long options are mandatory for short options too.\n" "\n" msgstr "" "長選項必須用的參數在使用短選項時也是必須的。\n" "\n" #: src/main.c:559 msgid "Startup:\n" msgstr "啟動：\n" #: src/main.c:561 #, fuzzy #| msgid " -V, --version display the version of Wget and exit.\n" msgid " -V, --version display the version of Wget and exit\n" msgstr " -V, --version 顯示 Wget 版本並離開\n" #: src/main.c:563 #, fuzzy #| msgid " -h, --help print this help.\n" msgid " -h, --help print this help\n" msgstr " -h, --help 印出這段說明文字\n" #: src/main.c:565 #, fuzzy #| msgid " -b, --background go to background after startup.\n" msgid " -b, --background go to background after startup\n" msgstr " -b, --background 啟動後進入背景作業\n" #: src/main.c:567 #, fuzzy #| msgid " -e, --execute=COMMAND execute a `.wgetrc'-style command.\n" msgid " -e, --execute=COMMAND execute a `.wgetrc'-style command\n" msgstr " -e, --execute=指令 執行 ‘.wgetrc’ 形式的指令\n" #: src/main.c:571 msgid "Logging and input file:\n" msgstr "紀錄訊息及輸入檔案：\n" #: src/main.c:573 #, fuzzy #| msgid " -o, --output-file=FILE log messages to FILE.\n" msgid " -o, --output-file=FILE log messages to FILE\n" msgstr " -o, --output-file=檔案 將紀錄訊息寫入<檔案>中\n" #: src/main.c:575 #, fuzzy #| msgid " -a, --append-output=FILE append messages to FILE.\n" msgid " -a, --append-output=FILE append messages to FILE\n" msgstr " -a, --append-output=檔案 將紀錄訊息加入<檔案>末端\n" #: src/main.c:578 #, fuzzy #| msgid " -d, --debug print lots of debugging information.\n" msgid " -d, --debug print lots of debugging information\n" msgstr " -d, --debug 印出偵錯訊息\n" #: src/main.c:582 #, fuzzy #| msgid " -d, --debug print lots of debugging information.\n" msgid " --wdebug print Watt-32 debug output\n" msgstr " -d, --debug 印出偵錯訊息\n" #: src/main.c:585 #, fuzzy #| msgid " -q, --quiet quiet (no output).\n" msgid " -q, --quiet quiet (no output)\n" msgstr " -q, --quiet 安靜模式 (不輸出訊息)\n" #: src/main.c:587 #, fuzzy #| msgid " -v, --verbose be verbose (this is the default).\n" msgid " -v, --verbose be verbose (this is the default)\n" msgstr " -v, --verbose 詳細輸出模式 (預設使用這個模式)\n" #: src/main.c:589 #, fuzzy #| msgid " -nv, --no-verbose turn off verboseness, without being quiet.\n" msgid " -nv, --no-verbose turn off verboseness, without being quiet\n" msgstr " -nv, --non-verbose 關閉詳細輸出模式，但不啟用安靜模式\n" #: src/main.c:591 msgid " --report-speed=TYPE output bandwidth as TYPE. TYPE can be bits\n" msgstr "" #: src/main.c:593 #, fuzzy #| msgid " -i, --input-file=FILE download URLs found in FILE.\n" msgid " -i, --input-file=FILE download URLs found in local or external FILE\n" msgstr " -i, --input-file=檔案 下載從檔案中找到的 URL\n" #: src/main.c:596 #, fuzzy #| msgid " -i, --input-file=FILE download URLs found in FILE.\n" msgid " --input-metalink=FILE download files covered in local Metalink FILE\n" msgstr " -i, --input-file=檔案 下載從檔案中找到的 URL\n" #: src/main.c:599 #, fuzzy #| msgid " -F, --force-html treat input file as HTML.\n" msgid " -F, --force-html treat input file as HTML\n" msgstr " -F, --force-html 以 HTML 方式處理輸入檔\n" #: src/main.c:601 #, fuzzy #| msgid "" #| " -N, --timestamping don't re-retrieve files unless newer than\n" #| " local.\n" msgid "" " -B, --base=URL resolves HTML input-file links (-i -F)\n" " relative to URL\n" msgstr " -N, --timestamping 除非遠端檔案比較新，否則不下載遠端檔案\n" #: src/main.c:604 #, fuzzy #| msgid " --no-cookies don't use cookies.\n" msgid " --config=FILE specify config file to use\n" msgstr " --no-cookies 不使用 cookie\n" #: src/main.c:606 #, fuzzy #| msgid " --no-cookies don't use cookies.\n" msgid " --no-config do not read any config file\n" msgstr " --no-cookies 不使用 cookie\n" #: src/main.c:608 msgid " --rejected-log=FILE log reasons for URL rejection to FILE\n" msgstr "" #: src/main.c:612 msgid "Download:\n" msgstr "下載：\n" #: src/main.c:614 #, fuzzy #| msgid " -t, --tries=NUMBER set number of retries to NUMBER (0 unlimits).\n" msgid " -t, --tries=NUMBER set number of retries to NUMBER (0 unlimits)\n" msgstr " -t, --tries=次數 設定重試次數 (0 表示無限)\n" #: src/main.c:616 #, fuzzy #| msgid " --retry-connrefused retry even if connection is refused.\n" msgid " --retry-connrefused retry even if connection is refused\n" msgstr " --retry-connrefused 即使連線被拒仍然會不斷嘗試\n" #: src/main.c:618 #, fuzzy #| msgid " -O, --output-document=FILE write documents to FILE.\n" msgid " -O, --output-document=FILE write documents to FILE\n" msgstr " -O --output-document=檔案 將資料寫入指定檔案中\n" #: src/main.c:620 #, fuzzy #| msgid "" #| " -nc, --no-clobber skip downloads that would download to\n" #| " existing files.\n" msgid "" " -nc, --no-clobber skip downloads that would download to\n" " existing files (overwriting them)\n" msgstr " -nc, --no-clobber 不覆寫已經存在的檔案\n" #: src/main.c:623 #, fuzzy #| msgid " -c, --continue resume getting a partially-downloaded file.\n" msgid " -c, --continue resume getting a partially-downloaded file\n" msgstr " -c, --continue 繼續下載已下載了一部份的檔案\n" #: src/main.c:625 msgid " --start-pos=OFFSET start downloading from zero-based position OFFSET\n" msgstr "" #: src/main.c:627 #, fuzzy #| msgid " --progress=TYPE select progress gauge type.\n" msgid " --progress=TYPE select progress gauge type\n" msgstr " --progress=方式 選擇下載進度的表示方式\n" #: src/main.c:629 #, fuzzy #| msgid " --progress=TYPE select progress gauge type.\n" msgid " --show-progress display the progress bar in any verbosity mode\n" msgstr " --progress=方式 選擇下載進度的表示方式\n" #: src/main.c:631 #, fuzzy #| msgid "" #| " -N, --timestamping don't re-retrieve files unless newer than\n" #| " local.\n" msgid "" " -N, --timestamping don't re-retrieve files unless newer than\n" " local\n" msgstr " -N, --timestamping 除非遠端檔案比較新，否則不下載遠端檔案\n" #: src/main.c:634 msgid "" " --no-if-modified-since don't use conditional if-modified-since get\n" " requests in timestamping mode\n" msgstr "" #: src/main.c:637 msgid "" " --no-use-server-timestamps don't set the local file's timestamp by\n" " the one on the server\n" msgstr "" #: src/main.c:640 #, fuzzy #| msgid " -S, --server-response print server response.\n" msgid " -S, --server-response print server response\n" msgstr " -S, --server-response 顯示伺服器回應訊息\n" #: src/main.c:642 #, fuzzy #| msgid " --spider don't download anything.\n" msgid " --spider don't download anything\n" msgstr " --spider 不下載任何資料\n" #: src/main.c:644 #, fuzzy #| msgid " -T, --timeout=SECONDS set all timeout values to SECONDS.\n" msgid " -T, --timeout=SECONDS set all timeout values to SECONDS\n" msgstr " -T, --timeout=秒數 指定所有時限為同一數值\n" #: src/main.c:647 msgid " --dns-servers=ADDRESSES list of DNS servers to query (comma separated)\n" msgstr "" #: src/main.c:649 #, fuzzy #| msgid " --bind-address=ADDRESS bind to ADDRESS (hostname or IP) on local host.\n" msgid " --bind-dns-address=ADDRESS bind DNS resolver to ADDRESS (hostname or IP) on local host\n" msgstr " --bind-address=位址 使用本機的指定位址 (主機名稱或 IP) 進行連線\n" #: src/main.c:652 #, fuzzy #| msgid " --dns-timeout=SECS set the DNS lookup timeout to SECS.\n" msgid " --dns-timeout=SECS set the DNS lookup timeout to SECS\n" msgstr " --dns-timeout=秒數 指定 DNS 查找主機的時限\n" #: src/main.c:654 #, fuzzy #| msgid " --connect-timeout=SECS set the connect timeout to SECS.\n" msgid " --connect-timeout=SECS set the connect timeout to SECS\n" msgstr " --connect-timeout=秒數 指定連線時限\n" #: src/main.c:656 #, fuzzy #| msgid " --read-timeout=SECS set the read timeout to SECS.\n" msgid " --read-timeout=SECS set the read timeout to SECS\n" msgstr " --read-timeout=秒數 指定讀取資料的時限\n" #: src/main.c:658 #, fuzzy #| msgid " -w, --wait=SECONDS wait SECONDS between retrievals.\n" msgid " -w, --wait=SECONDS wait SECONDS between retrievals\n" msgstr " -w, --wait=秒數 每次下載檔案之前等待指定秒數\n" #: src/main.c:660 #, fuzzy #| msgid " --waitretry=SECONDS wait 1..SECONDS between retries of a retrieval.\n" msgid " --waitretry=SECONDS wait 1..SECONDS between retries of a retrieval\n" msgstr "" " --waitretry=秒數 每次重覆嘗試前稍等一段時間 (由 1 秒至指\n" " 定秒數不等)\n" #: src/main.c:662 #, fuzzy #| msgid " --random-wait wait from 0...2*WAIT secs between retrievals.\n" msgid " --random-wait wait from 0.5*WAIT...1.5*WAIT secs between retrievals\n" msgstr " --random-wait 每次下載之前隨機地指定等待的時間\n" #: src/main.c:664 #, fuzzy #| msgid " --no-proxy explicitly turn off proxy.\n" msgid " --no-proxy explicitly turn off proxy\n" msgstr " --no-proxy 禁止使用代理伺服器\n" #: src/main.c:666 #, fuzzy #| msgid " -Q, --quota=NUMBER set retrieval quota to NUMBER.\n" msgid " -Q, --quota=NUMBER set retrieval quota to NUMBER\n" msgstr " -Q, --quota=大小 設定下載資料的限額大小\n" #: src/main.c:668 #, fuzzy #| msgid " --bind-address=ADDRESS bind to ADDRESS (hostname or IP) on local host.\n" msgid " --bind-address=ADDRESS bind to ADDRESS (hostname or IP) on local host\n" msgstr " --bind-address=位址 使用本機的指定位址 (主機名稱或 IP) 進行連線\n" #: src/main.c:670 #, fuzzy #| msgid " --limit-rate=RATE limit download rate to RATE.\n" msgid " --limit-rate=RATE limit download rate to RATE\n" msgstr " --limit-rate=速率 限制下載速率\n" #: src/main.c:672 #, fuzzy #| msgid " --no-dns-cache disable caching DNS lookups.\n" msgid " --no-dns-cache disable caching DNS lookups\n" msgstr " --no-dns-cache 不記憶 DNS 查找主機的資料\n" #: src/main.c:674 #, fuzzy #| msgid " --restrict-file-names=OS restrict chars in file names to ones OS allows.\n" msgid " --restrict-file-names=OS restrict chars in file names to ones OS allows\n" msgstr " --restrict-file-names=OS 只使用作業系統能夠接受的字元作為檔案字元\n" #: src/main.c:676 #, fuzzy #| msgid " --ignore-length ignore `Content-Length' header field.\n" msgid " --ignore-case ignore case when matching files/directories\n" msgstr " --ignore-length 忽略 ‘Content-Length’ 標頭欄位\n" #: src/main.c:679 #, fuzzy #| msgid " -4, --inet4-only connect only to IPv4 addresses.\n" msgid " -4, --inet4-only connect only to IPv4 addresses\n" msgstr " -4, --inet4-only 只會連接 IPv4 地址\n" #: src/main.c:681 #, fuzzy #| msgid " -6, --inet6-only connect only to IPv6 addresses.\n" msgid " -6, --inet6-only connect only to IPv6 addresses\n" msgstr " -6, --inet6-only 只會連接 IPv6 地址\n" #: src/main.c:683 #, fuzzy #| msgid "" #| " --prefer-family=FAMILY connect first to addresses of specified family,\n" #| " one of IPv6, IPv4, or none.\n" msgid "" " --prefer-family=FAMILY connect first to addresses of specified family,\n" " one of IPv6, IPv4, or none\n" msgstr "" " --prefer-family=FAMILY 優先採用指定的位址格式，可以是 IPv6、IPv4\n" " 或者 none\n" #: src/main.c:687 #, fuzzy #| msgid " --user=USER set both ftp and http user to USER.\n" msgid " --user=USER set both ftp and http user to USER\n" msgstr " --user=用戶 指定 ftp 和 http 用戶名稱\n" #: src/main.c:689 #, fuzzy #| msgid " --password=PASS set both ftp and http password to PASS.\n" msgid " --password=PASS set both ftp and http password to PASS\n" msgstr " --password=PASS 指定 ftp 和 http 密碼\n" #: src/main.c:691 #, fuzzy #| msgid " --password=PASS set both ftp and http password to PASS.\n" msgid " --ask-password prompt for passwords\n" msgstr " --password=PASS 指定 ftp 和 http 密碼\n" #: src/main.c:693 #, fuzzy #| msgid " --no-proxy explicitly turn off proxy.\n" msgid " --no-iri turn off IRI support\n" msgstr " --no-proxy 禁止使用代理伺服器\n" #: src/main.c:695 msgid " --local-encoding=ENC use ENC as the local encoding for IRIs\n" msgstr "" #: src/main.c:697 msgid " --remote-encoding=ENC use ENC as the default remote encoding\n" msgstr "" #: src/main.c:699 #, fuzzy #| msgid " --no-glob turn off FTP file name globbing.\n" msgid " --unlink remove file before clobber\n" msgstr " --no-glob 不展開有萬用字元的 FTP 檔名\n" #: src/main.c:702 msgid " --metalink-over-http use Metalink metadata from HTTP response headers\n" msgstr "" #: src/main.c:704 msgid " --preferred-location preferred location for Metalink resources\n" msgstr "" #: src/main.c:709 msgid "Directories:\n" msgstr "目錄：\n" #: src/main.c:711 #, fuzzy #| msgid " -nd, --no-directories don't create directories.\n" msgid " -nd, --no-directories don't create directories\n" msgstr " -nd --no-directories 不建立目錄\n" #: src/main.c:713 #, fuzzy #| msgid " -x, --force-directories force creation of directories.\n" msgid " -x, --force-directories force creation of directories\n" msgstr " -x, --force-directories 強制建立目錄\n" #: src/main.c:715 #, fuzzy #| msgid " -nH, --no-host-directories don't create host directories.\n" msgid " -nH, --no-host-directories don't create host directories\n" msgstr " -nH, --no-host-directories 不建立含有遠端主機名稱的目錄\n" #: src/main.c:717 #, fuzzy #| msgid " --protocol-directories use protocol name in directories.\n" msgid " --protocol-directories use protocol name in directories\n" msgstr " --protocol-directories 在目錄中加上通訊協定名稱\n" #: src/main.c:719 #, fuzzy #| msgid " -P, --directory-prefix=PREFIX save files to PREFIX/...\n" msgid " -P, --directory-prefix=PREFIX save files to PREFIX/..\n" msgstr " -P, --directory-prefix=名稱 儲存檔案前先建立指定名稱的目錄\n" #: src/main.c:721 #, fuzzy #| msgid " --cut-dirs=NUMBER ignore NUMBER remote directory components.\n" msgid " --cut-dirs=NUMBER ignore NUMBER remote directory components\n" msgstr " --cut-dirs=數目 忽略遠端目錄中指定<數目>的目錄層\n" #: src/main.c:725 msgid "HTTP options:\n" msgstr "HTTP 選項：\n" #: src/main.c:727 #, fuzzy #| msgid " --http-user=USER set http user to USER.\n" msgid " --http-user=USER set http user to USER\n" msgstr " --http-user=用戶 指定 HTTP 用戶名稱\n" #: src/main.c:729 #, fuzzy #| msgid " --http-password=PASS set http password to PASS.\n" msgid " --http-password=PASS set http password to PASS\n" msgstr " --http-passwd=密碼 指定 HTTP 密碼\n" #: src/main.c:731 #, fuzzy #| msgid " --no-cache disallow server-cached data.\n" msgid " --no-cache disallow server-cached data\n" msgstr " --no-cache 不使用伺服器中的快取記憶資料\n" #: src/main.c:733 msgid "" " --default-page=NAME change the default page name (normally\n" " this is 'index.html'.)\n" msgstr "" #: src/main.c:736 #, fuzzy #| msgid " -E, --html-extension save HTML documents with `.html' extension.\n" msgid " -E, --adjust-extension save HTML/CSS documents with proper extensions\n" msgstr " -E, --html-extension 將所有 HTML 文件加上 “.html” 延伸檔名\n" #: src/main.c:738 #, fuzzy #| msgid " --ignore-length ignore `Content-Length' header field.\n" msgid " --ignore-length ignore 'Content-Length' header field\n" msgstr " --ignore-length 忽略 ‘Content-Length’ 標頭欄位\n" #: src/main.c:740 #, fuzzy #| msgid " --header=STRING insert STRING among the headers.\n" msgid " --header=STRING insert STRING among the headers\n" msgstr " --header=字串 在連線資料標頭中加入指定字串\n" #: src/main.c:742 msgid " --max-redirect maximum redirections allowed per page\n" msgstr "" #: src/main.c:744 #, fuzzy #| msgid " --proxy-user=USER set USER as proxy username.\n" msgid " --proxy-user=USER set USER as proxy username\n" msgstr " --proxy-user=用戶 設定代理伺服器用戶名稱\n" #: src/main.c:746 #, fuzzy #| msgid " --proxy-password=PASS set PASS as proxy password.\n" msgid " --proxy-password=PASS set PASS as proxy password\n" msgstr " --proxy-password=密碼 設定代理伺服器密碼\n" #: src/main.c:748 #, fuzzy #| msgid " --referer=URL include `Referer: URL' header in HTTP request.\n" msgid " --referer=URL include 'Referer: URL' header in HTTP request\n" msgstr " --referer=URL 在 HTTP 請求中包括 ‘Referer: URL’ 標頭\n" #: src/main.c:750 #, fuzzy #| msgid " --save-headers save the HTTP headers to file.\n" msgid " --save-headers save the HTTP headers to file\n" msgstr " --save-headers 將 HTTP 連線資料標頭存檔\n" #: src/main.c:752 #, fuzzy #| msgid " -U, --user-agent=AGENT identify as AGENT instead of Wget/VERSION.\n" msgid " -U, --user-agent=AGENT identify as AGENT instead of Wget/VERSION\n" msgstr " -U, --user-agent=AGENT 宣稱為 AGENT 而不是 Wget/VERSION\n" #: src/main.c:754 #, fuzzy #| msgid " --no-http-keep-alive disable HTTP keep-alive (persistent connections).\n" msgid " --no-http-keep-alive disable HTTP keep-alive (persistent connections)\n" msgstr " --no-http-keep-alive 不使用 HTTP keep-alive (持久性連線)\n" #: src/main.c:756 #, fuzzy #| msgid " --no-cookies don't use cookies.\n" msgid " --no-cookies don't use cookies\n" msgstr " --no-cookies 不使用 cookie\n" #: src/main.c:758 #, fuzzy #| msgid " --load-cookies=FILE load cookies from FILE before session.\n" msgid " --load-cookies=FILE load cookies from FILE before session\n" msgstr " --load-cookies=檔案 程式啟動時由指定檔案載入 cookie\n" #: src/main.c:760 #, fuzzy #| msgid " --save-cookies=FILE save cookies to FILE after session.\n" msgid " --save-cookies=FILE save cookies to FILE after session\n" msgstr " --save-cookies=檔案 程式結束後將 cookie 儲存至指定檔案\n" #: src/main.c:762 #, fuzzy #| msgid " --keep-session-cookies load and save session (non-permanent) cookies.\n" msgid " --keep-session-cookies load and save session (non-permanent) cookies\n" msgstr " --keep-session-cookies 會載入和儲存暫時性的 cookie\n" #: src/main.c:764 #, fuzzy #| msgid " --post-data=STRING use the POST method; send STRING as the data.\n" msgid " --post-data=STRING use the POST method; send STRING as the data\n" msgstr " --post-data=字串 使用 POST 方式送出字串\n" #: src/main.c:766 #, fuzzy #| msgid " --post-file=FILE use the POST method; send contents of FILE.\n" msgid " --post-file=FILE use the POST method; send contents of FILE\n" msgstr " --post-file=檔案 使用 POST 方式送出檔案內容\n" #: src/main.c:768 msgid " --method=HTTPMethod use method \"HTTPMethod\" in the request\n" msgstr "" #: src/main.c:770 #, fuzzy #| msgid " --post-data=STRING use the POST method; send STRING as the data.\n" msgid " --body-data=STRING send STRING as data. --method MUST be set\n" msgstr " --post-data=字串 使用 POST 方式送出字串\n" #: src/main.c:772 #, fuzzy #| msgid " --post-file=FILE use the POST method; send contents of FILE.\n" msgid " --body-file=FILE send contents of FILE. --method MUST be set\n" msgstr " --post-file=檔案 使用 POST 方式送出檔案內容\n" #: src/main.c:774 msgid "" " --content-disposition honor the Content-Disposition header when\n" " choosing local file names (EXPERIMENTAL)\n" msgstr "" #: src/main.c:777 msgid " --content-on-error output the received content on server errors\n" msgstr "" #: src/main.c:779 msgid "" " --auth-no-challenge send Basic HTTP authentication information\n" " without first waiting for the server's\n" " challenge\n" msgstr "" #: src/main.c:786 msgid "HTTPS (SSL/TLS) options:\n" msgstr "HTTPS (SSL/TLS) 選項：\n" #: src/main.c:788 #, fuzzy #| msgid "" #| " --secure-protocol=PR choose secure protocol, one of auto, SSLv2,\n" #| " SSLv3, and TLSv1.\n" msgid "" " --secure-protocol=PR choose secure protocol, one of auto, SSLv2,\n" " SSLv3, TLSv1 and PFS\n" msgstr "" " --secure-protocol=PR 選擇安全通訊協定，可以使用 auto, SSLv2, \n" " SSLv3 或 TLSv1\n" #: src/main.c:791 #, fuzzy #| msgid " -L, --relative follow relative links only.\n" msgid " --https-only only follow secure HTTPS links\n" msgstr " -L, --relative 只跟隨相對鏈結\n" #: src/main.c:793 #, fuzzy #| msgid " --no-check-certificate don't validate the server's certificate.\n" msgid " --no-check-certificate don't validate the server's certificate\n" msgstr " --no-check-certificate 不檢驗伺服器的憑證\n" #: src/main.c:795 #, fuzzy #| msgid " --certificate=FILE client certificate file.\n" msgid " --certificate=FILE client certificate file\n" msgstr " --certificate=檔案 指定用戶端的憑證檔案名稱\n" #: src/main.c:797 #, fuzzy #| msgid " --certificate-type=TYPE client certificate type, PEM or DER.\n" msgid " --certificate-type=TYPE client certificate type, PEM or DER\n" msgstr " --certificate-type=類型 用戶端憑證的類型，可以是 PEM 或 DER\n" #: src/main.c:799 #, fuzzy #| msgid " --private-key=FILE private key file.\n" msgid " --private-key=FILE private key file\n" msgstr " --private-key=檔案 指定私鑰檔案\n" #: src/main.c:801 #, fuzzy #| msgid " --private-key-type=TYPE private key type, PEM or DER.\n" msgid " --private-key-type=TYPE private key type, PEM or DER\n" msgstr " --private-key-type=類型 私鑰的類型，可以是 PEM 或 DER\n" #: src/main.c:803 #, fuzzy #| msgid " --ca-certificate=FILE file with the bundle of CA's.\n" msgid " --ca-certificate=FILE file with the bundle of CAs\n" msgstr " --ca-certificate=檔案 載有憑證管理中心 (CA) 簽章的檔案\n" # (Abel) 這裡 hashed filename 和選項的用意無關，所以不翻譯 #: src/main.c:805 #, fuzzy #| msgid " --ca-directory=DIR directory where hash list of CA's is stored.\n" msgid " --ca-directory=DIR directory where hash list of CAs is stored\n" msgstr " --ca-directory=目錄 載有憑證管理中心 (CA) 簽章的目錄\n" #: src/main.c:807 #, fuzzy #| msgid " --ca-certificate=FILE file with the bundle of CA's.\n" msgid " --crl-file=FILE file with bundle of CRLs\n" msgstr " --ca-certificate=檔案 載有憑證管理中心 (CA) 簽章的檔案\n" #: src/main.c:809 msgid "" " --pinnedpubkey=FILE/HASHES Public key (PEM/DER) file, or any number\n" " of base64 encoded sha256 hashes preceded by\n" " 'sha256//' and seperated by ';', to verify\n" " peer against\n" msgstr "" #: src/main.c:815 #, fuzzy #| msgid " --random-file=FILE file with random data for seeding the SSL PRNG.\n" msgid " --random-file=FILE file with random data for seeding the SSL PRNG\n" msgstr " --random-file=檔案 作為 SSL 隨機數產生程序 (PRNG) 的來源數據檔案\n" #: src/main.c:819 #, fuzzy #| msgid " --egd-file=FILE file naming the EGD socket with random data.\n" msgid " --egd-file=FILE file naming the EGD socket with random data\n" msgstr " --egd-file=檔案 產生隨機數據的 EGD socket 檔案名稱\n" #: src/main.c:826 #, fuzzy #| msgid "HTTP options:\n" msgid "HSTS options:\n" msgstr "HTTP 選項：\n" #: src/main.c:828 #, fuzzy #| msgid " --no-cache disallow server-cached data.\n" msgid " --no-hsts disable HSTS\n" msgstr " --no-cache 不使用伺服器中的快取記憶資料\n" #: src/main.c:830 msgid " --hsts-file path of HSTS database (will override default)\n" msgstr "" #: src/main.c:835 msgid "FTP options:\n" msgstr "FTP 選項：\n" #: src/main.c:838 msgid " --ftp-stmlf use Stream_LF format for all binary FTP files\n" msgstr "" #: src/main.c:841 #, fuzzy #| msgid " --ftp-user=USER set ftp user to USER.\n" msgid " --ftp-user=USER set ftp user to USER\n" msgstr " --ftp-user=用戶 指定 FTP 用戶名稱\n" #: src/main.c:843 #, fuzzy #| msgid " --ftp-password=PASS set ftp password to PASS.\n" msgid " --ftp-password=PASS set ftp password to PASS\n" msgstr " --ftp-password=密碼 設定 FTP 密碼\n" #: src/main.c:845 #, fuzzy #| msgid " --no-remove-listing don't remove `.listing' files.\n" msgid " --no-remove-listing don't remove '.listing' files\n" msgstr " --no-remove-listing 不刪除 ‘.listing’ 檔案\n" #: src/main.c:847 #, fuzzy #| msgid " --no-glob turn off FTP file name globbing.\n" msgid " --no-glob turn off FTP file name globbing\n" msgstr " --no-glob 不展開有萬用字元的 FTP 檔名\n" #: src/main.c:849 #, fuzzy #| msgid " --no-passive-ftp disable the \"passive\" transfer mode.\n" msgid " --no-passive-ftp disable the \"passive\" transfer mode\n" msgstr " --no-passive-ftp 不使用「被動」傳輸模式\n" #: src/main.c:851 #, fuzzy #| msgid " --preserve-permissions preserve remote file permissions.\n" msgid " --preserve-permissions preserve remote file permissions\n" msgstr " --preserve-permissions 沿用遠端檔案的權限\n" #: src/main.c:853 #, fuzzy #| msgid " --retr-symlinks when recursing, get linked-to files (not dir).\n" msgid " --retr-symlinks when recursing, get linked-to files (not dir)\n" msgstr "" " --retr-symlinks 在遞迴模式中，下載鏈結指示的目標檔案 \n" " (不包括目錄)\n" #: src/main.c:858 #, fuzzy #| msgid "FTP options:\n" msgid "FTPS options:\n" msgstr "FTP 選項：\n" #: src/main.c:860 msgid " --ftps-implicit use implicit FTPS (default port is 990)\n" msgstr "" #: src/main.c:862 msgid "" " --ftps-resume-ssl resume the SSL/TLS session started in the control connection when\n" " opening a data connection\n" msgstr "" #: src/main.c:865 msgid " --ftps-clear-data-connection cipher the control channel only; all the data will be in plaintext\n" msgstr "" #: src/main.c:867 msgid " --ftps-fallback-to-ftp fall back to FTP if FTPS is not supported in the target server\n" msgstr "" #: src/main.c:871 #, fuzzy #| msgid "FTP options:\n" msgid "WARC options:\n" msgstr "FTP 選項：\n" #: src/main.c:873 msgid " --warc-file=FILENAME save request/response data to a .warc.gz file\n" msgstr "" #: src/main.c:875 #, fuzzy #| msgid " --header=STRING insert STRING among the headers.\n" msgid " --warc-header=STRING insert STRING into the warcinfo record\n" msgstr " --header=字串 在連線資料標頭中加入指定字串\n" #: src/main.c:877 #, fuzzy #| msgid " -t, --tries=NUMBER set number of retries to NUMBER (0 unlimits).\n" msgid " --warc-max-size=NUMBER set maximum size of WARC files to NUMBER\n" msgstr " -t, --tries=次數 設定重試次數 (0 表示無限)\n" #: src/main.c:879 #, fuzzy #| msgid " --spider don't download anything.\n" msgid " --warc-cdx write CDX index files\n" msgstr " --spider 不下載任何資料\n" #: src/main.c:881 msgid " --warc-dedup=FILENAME do not store records listed in this CDX file\n" msgstr "" #: src/main.c:884 msgid " --no-warc-compression do not compress WARC files with GZIP\n" msgstr "" #: src/main.c:887 #, fuzzy #| msgid " --no-cookies don't use cookies.\n" msgid " --no-warc-digests do not calculate SHA1 digests\n" msgstr " --no-cookies 不使用 cookie\n" #: src/main.c:889 msgid " --no-warc-keep-log do not store the log file in a WARC record\n" msgstr "" #: src/main.c:891 msgid "" " --warc-tempdir=DIRECTORY location for temporary files created by the\n" " WARC writer\n" msgstr "" #: src/main.c:896 msgid "Recursive download:\n" msgstr "遞迴下載：\n" #: src/main.c:898 #, fuzzy #| msgid " -r, --recursive specify recursive download.\n" msgid " -r, --recursive specify recursive download\n" msgstr " -r, --recursive 遞迴下載\n" #: src/main.c:900 #, fuzzy #| msgid " -l, --level=NUMBER maximum recursion depth (inf or 0 for infinite).\n" msgid " -l, --level=NUMBER maximum recursion depth (inf or 0 for infinite)\n" msgstr " -l, --level=數字 最大搜尋深度 (inf 或 0 表示無限)\n" #: src/main.c:902 #, fuzzy #| msgid " --delete-after delete files locally after downloading them.\n" msgid " --delete-after delete files locally after downloading them\n" msgstr " --delete-after 刪除下載後的檔案\n" #: src/main.c:904 #, fuzzy #| msgid " -k, --convert-links make links in downloaded HTML point to local files.\n" msgid "" " -k, --convert-links make links in downloaded HTML or CSS point to\n" " local files\n" msgstr " -k, --convert-links 將下載後的 HTML 的鏈結轉換為本地檔案\n" #: src/main.c:907 msgid " --convert-file-only convert the file part of the URLs only (usually known as the basename)\n" msgstr "" #: src/main.c:909 msgid " --backups=N before writing file X, rotate up to N backup files\n" msgstr "" #: src/main.c:913 #, fuzzy #| msgid " -K, --backup-converted before converting file X, back up as X.orig.\n" msgid " -K, --backup-converted before converting file X, back up as X_orig\n" msgstr " -K, --backup-converted 將檔案 X 轉換前先備份為 X.orig\n" #: src/main.c:916 #, fuzzy #| msgid " -K, --backup-converted before converting file X, back up as X.orig.\n" msgid " -K, --backup-converted before converting file X, back up as X.orig\n" msgstr " -K, --backup-converted 將檔案 X 轉換前先備份為 X.orig\n" #: src/main.c:919 #, fuzzy #| msgid " -m, --mirror shortcut for -N -r -l inf --no-remove-listing.\n" msgid " -m, --mirror shortcut for -N -r -l inf --no-remove-listing\n" msgstr " -m, --mirror 相等於 -N -r -l inf --no-remove-listing 選項\n" #: src/main.c:921 #, fuzzy #| msgid " -p, --page-requisites get all images, etc. needed to display HTML page.\n" msgid " -p, --page-requisites get all images, etc. needed to display HTML page\n" msgstr " -p, --page-requisites 下載所有顯示網頁所需的檔案，例如圖片等\n" #: src/main.c:923 #, fuzzy #| msgid " --strict-comments turn on strict (SGML) handling of HTML comments.\n" msgid " --strict-comments turn on strict (SGML) handling of HTML comments\n" msgstr " --strict-comments 用嚴格方式 (SGML) 處理 HTML 注釋。\n" #: src/main.c:927 msgid "Recursive accept/reject:\n" msgstr "遞迴下載時有關接受/拒絕的選項：\n" #: src/main.c:929 #, fuzzy #| msgid " -A, --accept=LIST comma-separated list of accepted extensions.\n" msgid " -A, --accept=LIST comma-separated list of accepted extensions\n" msgstr " -A, --accept=清單 接受的檔案樣式，以逗號分隔\n" #: src/main.c:931 #, fuzzy #| msgid " -R, --reject=LIST comma-separated list of rejected extensions.\n" msgid " -R, --reject=LIST comma-separated list of rejected extensions\n" msgstr " -R, --reject=清單 排除的檔案樣式，以逗號分隔\n" #: src/main.c:933 msgid " --accept-regex=REGEX regex matching accepted URLs\n" msgstr "" #: src/main.c:935 msgid " --reject-regex=REGEX regex matching rejected URLs\n" msgstr "" #: src/main.c:938 #, fuzzy #| msgid " --progress=TYPE select progress gauge type.\n" msgid " --regex-type=TYPE regex type (posix|pcre)\n" msgstr " --progress=方式 選擇下載進度的表示方式\n" #: src/main.c:941 #, fuzzy #| msgid " --progress=TYPE select progress gauge type.\n" msgid " --regex-type=TYPE regex type (posix)\n" msgstr " --progress=方式 選擇下載進度的表示方式\n" #: src/main.c:944 #, fuzzy #| msgid " -D, --domains=LIST comma-separated list of accepted domains.\n" msgid " -D, --domains=LIST comma-separated list of accepted domains\n" msgstr " -D, --domains=清單 接受的網域，以逗號分隔\n" #: src/main.c:946 #, fuzzy #| msgid " --exclude-domains=LIST comma-separated list of rejected domains.\n" msgid " --exclude-domains=LIST comma-separated list of rejected domains\n" msgstr " --exclude-domains=清單 排除的網域，以逗號分隔\n" #: src/main.c:948 #, fuzzy #| msgid " --follow-ftp follow FTP links from HTML documents.\n" msgid " --follow-ftp follow FTP links from HTML documents\n" msgstr " --follow-ftp 跟隨 HTML 文件中的 FTP 鏈結\n" #: src/main.c:950 #, fuzzy #| msgid " --follow-tags=LIST comma-separated list of followed HTML tags.\n" msgid " --follow-tags=LIST comma-separated list of followed HTML tags\n" msgstr " --follow-tags=清單 會跟隨的 HTML 標籤，以逗號分隔\n" #: src/main.c:952 #, fuzzy #| msgid " --ignore-tags=LIST comma-separated list of ignored HTML tags.\n" msgid " --ignore-tags=LIST comma-separated list of ignored HTML tags\n" msgstr " -G, --ignore-tags=清單 會忽略的 HTML 標籤，以逗號分隔\n" #: src/main.c:954 #, fuzzy #| msgid " -H, --span-hosts go to foreign hosts when recursive.\n" msgid " -H, --span-hosts go to foreign hosts when recursive\n" msgstr " -H, --span-hosts 遞迴模式中可進入其它主機\n" #: src/main.c:956 #, fuzzy #| msgid " -L, --relative follow relative links only.\n" msgid " -L, --relative follow relative links only\n" msgstr " -L, --relative 只跟隨相對鏈結\n" #: src/main.c:958 #, fuzzy #| msgid " -I, --include-directories=LIST list of allowed directories.\n" msgid " -I, --include-directories=LIST list of allowed directories\n" msgstr " -I, --include-directories=清單 準備下載的目錄\n" #: src/main.c:960 msgid "" " --trust-server-names use the name specified by the redirection\n" " URL's last component\n" msgstr "" #: src/main.c:963 #, fuzzy #| msgid " -X, --exclude-directories=LIST list of excluded directories.\n" msgid " -X, --exclude-directories=LIST list of excluded directories\n" msgstr " -X, --exclude-directories=清單 準備排除的目錄\n" #: src/main.c:965 #, fuzzy #| msgid " -np, --no-parent don't ascend to the parent directory.\n" msgid " -np, --no-parent don't ascend to the parent directory\n" msgstr " -np, --no-parent 不進入上層的目錄\n" #: src/main.c:968 #, fuzzy #| msgid "Mail bug reports and suggestions to .\n" msgid "Mail bug reports and suggestions to \n" msgstr "請將錯誤報告或建議寄給 。\n" #: src/main.c:973 #, c-format msgid "GNU Wget %s, a non-interactive network retriever.\n" msgstr "GNU Wget %s，非互動式檔案下載工具。\n" #: src/main.c:1016 #, c-format msgid "Password for user %s: " msgstr "" #: src/main.c:1018 #, c-format msgid "Password: " msgstr "" #: src/main.c:1086 msgid "Wgetrc: " msgstr "" #: src/main.c:1087 msgid "Locale: " msgstr "" #: src/main.c:1088 msgid "Compile: " msgstr "" #: src/main.c:1089 msgid "Link: " msgstr "" #: src/main.c:1093 #, c-format msgid "" "GNU Wget %s built on %s.\n" "\n" msgstr "" #: src/main.c:1120 #, c-format msgid " %s (env)\n" msgstr "" #: src/main.c:1127 #, c-format msgid " %s (user)\n" msgstr "" #: src/main.c:1132 #, c-format msgid " %s (system)\n" msgstr "" #. TRANSLATORS: When available, an actual copyright character #. (circle-c) should be used in preference to "(C)". #: src/main.c:1160 #, fuzzy, c-format #| msgid "Copyright (C) 2005 Free Software Foundation, Inc.\n" msgid "Copyright (C) %s Free Software Foundation, Inc.\n" msgstr "版權所有 (C) 2005 自由軟體基金會\n" #: src/main.c:1163 msgid "" "License GPLv3+: GNU GPL version 3 or later\n" ".\n" "This is free software: you are free to change and redistribute it.\n" "There is NO WARRANTY, to the extent permitted by law.\n" msgstr "" #. TRANSLATORS: When available, please use the proper diacritics for #. names such as this one. See en_US.po for reference. #: src/main.c:1171 msgid "" "\n" "Originally written by Hrvoje Niksic .\n" msgstr "" "\n" "最初由 Hrvoje Niksic 編寫。\n" #: src/main.c:1174 #, fuzzy #| msgid "Mail bug reports and suggestions to .\n" msgid "Please send bug reports and questions to .\n" msgstr "請將錯誤報告或建議寄給 。\n" #: src/main.c:1223 src/main.c:1723 #, c-format msgid "Memory allocation problem\n" msgstr "" #: src/main.c:1273 #, c-format msgid "Exiting due to error in %s\n" msgstr "" #: src/main.c:1302 src/main.c:1372 src/main.c:1584 #, c-format msgid "Try `%s --help' for more options.\n" msgstr "請嘗試執行‘%s --help’查看更多選項。\n" #: src/main.c:1368 #, c-format msgid "%s: illegal option -- `-n%c'\n" msgstr "%s: 選項不合法 -- ‘-n%c’\n" #: src/main.c:1411 #, c-format msgid "Debugging support not compiled in. Ignoring --debug flag.\n" msgstr "" #: src/main.c:1424 #, c-format msgid "Both --no-clobber and --convert-links were specified, only --convert-links will be used.\n" msgstr "" #: src/main.c:1426 #, c-format msgid "Both --no-clobber and --convert-file-only were specified, only --convert-file-only will be used.\n" msgstr "" #: src/main.c:1459 #, c-format msgid "Can't be verbose and quiet at the same time.\n" msgstr "無法同時使用詳細輸出模式及安靜模式。\n" #: src/main.c:1465 #, c-format msgid "Can't timestamp and not clobber old files at the same time.\n" msgstr "無法同時使用時間標記而不更改本機檔案。\n" #: src/main.c:1474 #, c-format msgid "Cannot specify both --inet4-only and --inet6-only.\n" msgstr "不可以同時使用 --inet4-only 和 --inet6-only 選項。\n" #: src/main.c:1484 msgid "" "Cannot specify both -k or --convert-file-only and -O if multiple URLs are given, or in combination\n" "with -p or -r. See the manual for details.\n" "\n" msgstr "" #: src/main.c:1493 msgid "" "WARNING: combining -O with -r or -p will mean that all downloaded content\n" "will be placed in the single file you specified.\n" "\n" msgstr "" #: src/main.c:1499 msgid "" "WARNING: timestamping does nothing in combination with -O. See the manual\n" "for details.\n" "\n" msgstr "" #: src/main.c:1508 #, c-format msgid "File `%s' already there; not retrieving.\n" msgstr "檔案 ‘%s’ 已存在，不會下載。\n" #: src/main.c:1519 #, c-format msgid "WARC output does not work with --no-clobber, --no-clobber will be disabled.\n" msgstr "" #: src/main.c:1526 #, c-format msgid "WARC output does not work with timestamping, timestamping will be disabled.\n" msgstr "" #: src/main.c:1533 #, c-format msgid "WARC output does not work with --spider.\n" msgstr "" #: src/main.c:1539 #, c-format msgid "WARC output does not work with --continue or --start-pos, they will be disabled.\n" msgstr "" #: src/main.c:1547 #, c-format msgid "Digests are disabled; WARC deduplication will not find duplicate records.\n" msgstr "" #: src/main.c:1559 #, fuzzy, c-format #| msgid "Cannot specify both --inet4-only and --inet6-only.\n" msgid "Cannot specify both --ask-password and --password.\n" msgstr "不可以同時使用 --inet4-only 和 --inet6-only 選項。\n" #: src/main.c:1567 #, c-format msgid "Specifying both --start-pos and --continue is not recommended; --continue will be disabled.\n" msgstr "" #: src/main.c:1579 #, c-format msgid "%s: missing URL\n" msgstr "%s: 未指定 URL\n" #: src/main.c:1620 #, fuzzy, c-format #| msgid "Cannot specify both --inet4-only and --inet6-only.\n" msgid "You cannot specify both --post-data and --post-file.\n" msgstr "不可以同時使用 --inet4-only 和 --inet6-only 選項。\n" #: src/main.c:1625 #, c-format msgid "You cannot use --post-data or --post-file along with --method. --method expects data through --body-data and --body-file options" msgstr "" #: src/main.c:1634 #, c-format msgid "You must specify a method through --method=HTTPMethod to use with --body-data or --body-file.\n" msgstr "" #: src/main.c:1640 #, fuzzy, c-format #| msgid "Cannot specify both --inet4-only and --inet6-only.\n" msgid "You cannot specify both --body-data and --body-file.\n" msgstr "不可以同時使用 --inet4-only 和 --inet6-only 選項。\n" #: src/main.c:1692 #, c-format msgid "This version does not have support for IRIs\n" msgstr "" #: src/main.c:1792 #, c-format msgid "-k or -r can be used together with -O only if outputting to a regular file.\n" msgstr "" #: src/main.c:1798 #, c-format msgid "--convert-links or --convert-file-only can be used together only if outputting to a regular file.\n" msgstr "" #: src/main.c:1809 #, c-format msgid "Failed to init libcares\n" msgstr "" #: src/main.c:1815 #, c-format msgid "Failed to init c-ares channel\n" msgstr "" #: src/main.c:1838 #, c-format msgid "Failed to parse IP address '%s'\n" msgstr "" #: src/main.c:1849 #, c-format msgid "Failed to set DNS server(s) '%s' (%d)\n" msgstr "" #: src/main.c:1973 #, c-format msgid "No URLs found in %s.\n" msgstr "在 %s 中找不到 URL。\n" #: src/main.c:1989 #, fuzzy, c-format #| msgid "Unable to delete `%s': %s\n" msgid "Unable to parse metalink file %s.\n" msgstr "無法刪除‘%s’: %s\n" #: src/main.c:2019 #, c-format msgid "Could not download all resources from %s.\n" msgstr "" #: src/main.c:2046 #, fuzzy, c-format #| msgid "" #| "\n" #| "FINISHED --%s--\n" #| "Downloaded: %s bytes in %d files\n" msgid "" "FINISHED --%s--\n" "Total wall clock time: %s\n" "Downloaded: %d files, %s in %s (%s)\n" msgstr "" "\n" "完成 --%s--\n" "下載了: %s 位元組，共 %d 個檔案\n" #: src/main.c:2060 #, fuzzy, c-format #| msgid "Download quota (%s bytes) EXCEEDED!\n" msgid "Download quota of %s EXCEEDED!\n" msgstr "超過下載限額 (%s 位元組)！\n" #: src/metalink.c:76 msgid "-O not supported for metalink download. Ignoring.\n" msgstr "" #: src/metalink.c:109 #, c-format msgid "Resource type %s not supported, ignoring...\n" msgstr "" #: src/metalink.c:174 msgid "Could not open downloaded file.\n" msgstr "" #: src/metalink.c:194 #, c-format msgid "Computing checksum for %s\n" msgstr "" #: src/metalink.c:204 msgid "Checksum matches.\n" msgstr "" #: src/metalink.c:210 #, c-format msgid "Checksum mismatch for file %s.\n" msgstr "" #: src/metalink.c:251 msgid "Could not open downloaded file for signature verification.\n" msgstr "" #: src/metalink.c:310 #, c-format msgid "GPGME data_new_from_mem: %s\n" msgstr "" #: src/metalink.c:322 #, c-format msgid "GPGME op_verify: %s\n" msgstr "" #: src/metalink.c:335 msgid "GPGME op_verify_result: NULL\n" msgstr "" #: src/metalink.c:351 msgid "Signature validation suceeded.\n" msgstr "" #: src/metalink.c:359 msgid "Invalid signature. Rejecting resource.\n" msgstr "" #: src/metalink.c:368 msgid "Data matches signature, but signature is not trusted.\n" msgstr "" #: src/metalink.c:395 #, c-format msgid "Failed to download %s. Skipping resource.\n" msgstr "" #: src/metalink.c:402 #, c-format msgid "File %s retrieved but checksum does not match. \n" msgstr "" #: src/metalink.c:411 #, c-format msgid "File %s retrieved but signature does not match. \n" msgstr "" #: src/mswindows.c:100 #, c-format msgid "Continuing in background.\n" msgstr "繼續在背景中執行。\n" #: src/mswindows.c:293 #, c-format msgid "Continuing in background, pid %lu.\n" msgstr "繼續在背景中執行，pid 為 %lu。\n" #: src/mswindows.c:295 src/utils.c:503 #, fuzzy, c-format #| msgid "Output will be written to `%s'.\n" msgid "Output will be written to %s.\n" msgstr "將輸出資料寫入 ‘%s’。\n" #: src/mswindows.c:327 #, c-format msgid "fake_fork_child() failed\n" msgstr "" #: src/mswindows.c:335 #, c-format msgid "fake_fork() failed\n" msgstr "" #: src/mswindows.c:463 src/mswindows.c:470 #, c-format msgid "%s: Couldn't find usable socket driver.\n" msgstr "%s: 找不到可用的 socket 驅動程式。\n" #: src/mswindows.c:650 #, c-format msgid "ioctl() failed. The socket could not be set as blocking.\n" msgstr "" #: src/netrc.c:354 #, fuzzy, c-format #| msgid "%s: %s:%d: warning: \"%s\" token appears before any machine name\n" msgid "%s: %s:%d: warning: %s token appears before any machine name\n" msgstr "%s: %s:%d: 警告: 「%s」出現在主機名稱之前\n" #: src/netrc.c:385 #, c-format msgid "%s: %s:%d: unknown token \"%s\"\n" msgstr "%s: %s:%d: 不明的標記「%s」\n" #: src/netrc.c:448 #, c-format msgid "Usage: %s NETRC [HOSTNAME]\n" msgstr "用法: %s NETRC [主機名稱]\n" #: src/netrc.c:466 #, c-format msgid "%s: cannot stat %s: %s\n" msgstr "%s：無法 stat() %s：%s\n" #: src/openssl.c:123 msgid "WARNING: using a weak random seed.\n" msgstr "警告：隨機數品質不夠。\n" #: src/openssl.c:195 msgid "Could not seed PRNG; consider using --random-file.\n" msgstr "無法產生 OpenSSL 隨機數產生程序 (PRNG) 使用的種子；請考慮使用 --random-file 選項。\n" #: src/openssl.c:243 msgid "Your OpenSSL version is too old to support TLSv1.1\n" msgstr "" #: src/openssl.c:247 msgid "Your OpenSSL version is too old to support TLSv1.2\n" msgstr "" #: src/openssl.c:252 #, c-format msgid "OpenSSL: unimplemented 'secure-protocol' option value %d\n" msgstr "" #: src/openssl.c:796 #, fuzzy, c-format #| msgid "%s: No certificate presented by %s.\n" msgid "%s: cannot verify %s's certificate, issued by %s:\n" msgstr "%s：%s 沒有提供憑證。\n" #: src/openssl.c:807 msgid " Unable to locally verify the issuer's authority.\n" msgstr "" #: src/openssl.c:812 msgid " Self-signed certificate encountered.\n" msgstr "" #: src/openssl.c:815 msgid " Issued certificate not yet valid.\n" msgstr "" #: src/openssl.c:818 msgid " Issued certificate has expired.\n" msgstr "" #: src/openssl.c:906 #, fuzzy, c-format #| msgid "%s: certificate common name `%s' doesn't match requested host name `%s'.\n" msgid "" "%s: no certificate subject alternative name matches\n" "\trequested host name %s.\n" msgstr "%s：憑證的 common name ‘%s’ 和主機名稱 ‘%s’ 不符。\n" #: src/openssl.c:925 #, fuzzy, c-format #| msgid "%s: certificate common name `%s' doesn't match requested host name `%s'.\n" msgid " %s: certificate common name %s doesn't match requested host name %s.\n" msgstr "%s：憑證的 common name ‘%s’ 和主機名稱 ‘%s’ 不符。\n" #: src/openssl.c:957 #, c-format msgid "" " %s: certificate common name is invalid (contains a NUL character).\n" " This may be an indication that the host is not who it claims to be\n" " (that is, it is not the real %s).\n" msgstr "" #: src/openssl.c:982 #, c-format msgid "To connect to %s insecurely, use `--no-check-certificate'.\n" msgstr "如果不想用安全模式連接 %s，請使用 ‘--no-check-certificate’ 選項\n" #: src/progress.c:245 #, fuzzy, c-format #| msgid "" #| "\n" #| "%*s[ skipping %dK ]" msgid "" "\n" "%*s[ skipping %sK ]" msgstr "" "\n" "%*s[ 略過 %dK ]" #: src/progress.c:466 #, fuzzy, c-format #| msgid "Invalid dot style specification `%s'; leaving unchanged.\n" msgid "Invalid dot style specification %s; leaving unchanged.\n" msgstr "進度指示方式 ‘%s’ 無效；不會改變原來方式。\n" #. TRANSLATORS: "ETA" is English-centric, but this must #. be short, ideally 3 chars. Abbreviate if necessary. #: src/progress.c:858 #, c-format msgid " eta %s" msgstr "" #: src/progress.c:1153 msgid " in " msgstr "" #: src/ptimer.c:158 #, c-format msgid "Cannot get REALTIME clock frequency: %s\n" msgstr "無法讀取實時時鐘的頻率：%s\n" #: src/recur.c:502 #, c-format msgid "Removing %s since it should be rejected.\n" msgstr "刪除 %s，因為它應該被指定了拒絕下載。\n" #: src/res.c:392 #, c-format msgid "Cannot open %s: %s" msgstr "無法開啟 %s: %s" #: src/res.c:551 msgid "Loading robots.txt; please ignore errors.\n" msgstr "正在載入 robots.txt；請忽略錯誤訊息。\n" #: src/retr.c:772 #, c-format msgid "Error parsing proxy URL %s: %s.\n" msgstr "分析代理伺服器 URL %s 時發生錯誤: %s。\n" #: src/retr.c:784 #, c-format msgid "Error in proxy URL %s: Must be HTTP.\n" msgstr "代理伺服器 URL %s 錯誤: 必須是 HTTP。\n" #: src/retr.c:913 #, c-format msgid "%d redirections exceeded.\n" msgstr "已超過 %d 次重新導向。\n" #: src/retr.c:1172 msgid "" "Giving up.\n" "\n" msgstr "" "放棄。\n" "\n" #: src/retr.c:1172 msgid "" "Retrying.\n" "\n" msgstr "" "準備重試。\n" "\n" #: src/spider.c:75 msgid "" "Found no broken links.\n" "\n" msgstr "" #: src/spider.c:82 #, c-format msgid "" "Found %d broken link.\n" "\n" msgid_plural "" "Found %d broken links.\n" "\n" msgstr[0] "" msgstr[1] "" #: src/url.c:670 msgid "No error" msgstr "沒有錯誤" #: src/url.c:672 #, fuzzy, c-format #| msgid "Unsupported scheme" msgid "Unsupported scheme %s" msgstr "不支援這種 URL 格式" #: src/url.c:674 msgid "Scheme missing" msgstr "" #: src/url.c:676 msgid "Invalid host name" msgstr "主機名稱無效" #: src/url.c:678 msgid "Bad port number" msgstr "通訊埠號錯誤" #: src/url.c:680 msgid "Invalid user name" msgstr "用戶名稱無效" #: src/url.c:682 msgid "Unterminated IPv6 numeric address" msgstr "未完成的 IPv6 位址" #: src/url.c:684 msgid "IPv6 addresses not supported" msgstr "不支援 IPv6 位址" #: src/url.c:686 msgid "Invalid IPv6 numeric address" msgstr "IPv6 位址無效" #: src/url.c:992 msgid "HTTPS support not compiled in" msgstr "" #: src/utils.c:129 #, fuzzy, c-format #| msgid "%s: %s: Failed to allocate %ld bytes; memory exhausted.\n" msgid "%s: %s: Failed to allocate enough memory; memory exhausted.\n" msgstr "%s：%s：無法分配 %ld 位元組，記憶體已耗盡。\n" #: src/utils.c:135 #, c-format msgid "%s: %s: Failed to allocate %ld bytes; memory exhausted.\n" msgstr "%s：%s：無法分配 %ld 位元組，記憶體已耗盡。\n" #: src/utils.c:349 #, c-format msgid "%s: aprintf: text buffer is too big (%d bytes), aborting.\n" msgstr "" #: src/utils.c:501 #, c-format msgid "Continuing in background, pid %d.\n" msgstr "繼續在背景中執行，pid 為 %d。\n" #: src/utils.c:577 #, fuzzy, c-format #| msgid "Failed to unlink symlink `%s': %s\n" msgid "Failed to unlink symlink %s: %s\n" msgstr "無法刪除符號鏈結 '%s': %s\n" #: src/utils.c:2307 src/utils.c:2326 #, c-format msgid "Invalid regular expression %s, %s\n" msgstr "" #: src/utils.c:2350 src/utils.c:2374 #, fuzzy, c-format #| msgid "Error writing to `%s': %s\n" msgid "Error while matching %s: %d\n" msgstr "寫入‘%s’時發生錯誤: %s\n" #: src/warc.c:222 msgid "Error opening GZIP stream to WARC file.\n" msgstr "" #: src/warc.c:797 msgid "Error writing warcinfo record to WARC file.\n" msgstr "" #: src/warc.c:860 #, c-format msgid "" "Opening WARC file %s.\n" "\n" msgstr "" #: src/warc.c:866 #, fuzzy, c-format #| msgid "Error parsing proxy URL %s: %s.\n" msgid "Error opening WARC file %s.\n" msgstr "分析代理伺服器 URL %s 時發生錯誤: %s。\n" #: src/warc.c:1063 msgid "CDX file does not list original urls. (Missing column 'a'.)\n" msgstr "" #: src/warc.c:1066 msgid "CDX file does not list checksums. (Missing column 'k'.)\n" msgstr "" #: src/warc.c:1069 msgid "CDX file does not list record ids. (Missing column 'u'.)\n" msgstr "" #: src/warc.c:1093 #, c-format msgid "" "Loaded %d record from CDX.\n" "\n" msgid_plural "" "Loaded %d records from CDX.\n" "\n" msgstr[0] "" msgstr[1] "" #: src/warc.c:1139 #, c-format msgid "Could not read CDX file %s for deduplication.\n" msgstr "" #: src/warc.c:1149 msgid "Could not open temporary WARC manifest file.\n" msgstr "" #: src/warc.c:1159 msgid "Could not open temporary WARC log file.\n" msgstr "" #: src/warc.c:1168 msgid "Could not open WARC file.\n" msgstr "" #: src/warc.c:1177 msgid "Could not open CDX file for output.\n" msgstr "" #: src/warc.c:1207 msgid "Could not open temporary WARC file.\n" msgstr "" #: src/warc.c:1473 msgid "Found exact match in CDX file. Saving revisit record to WARC.\n" msgstr "" #~ msgid "Error in Set-Cookie, field `%s'" #~ msgstr "Set-Cookie 的欄位‘%s’出現錯誤" #~ msgid "%s: illegal option -- %c\n" #~ msgstr "%s: 選項不合法 ─ %c\n" #~ msgid "Authorization failed.\n" #~ msgstr "認證失敗！\n" #~ msgid "%s (%s) - Connection closed at byte %s/%s. " #~ msgstr "%s (%s) - 在 %s/%s 位元組後連線突然中斷。 " #~ msgid "" #~ "%s: %s: Invalid extended boolean `%s';\n" #~ "use one of `on', `off', `always', or `never'.\n" #~ msgstr "" #~ "%s: %s: 邏輯值 ‘%s’ 無效，\n" #~ "請使用 ‘always’, ‘on’, ‘off’ 或 ‘never’。\n" #~ msgid " -B, --base=URL prepends URL to relative links in -F -i file.\n" #~ msgstr " -B, --base=URL 使用 -F -i file 選項時，在相對鏈結前加入 URL\n" #~ msgid " -Y, --proxy explicitly turn on proxy.\n" #~ msgstr " -Y, --proxy 必定使用代理伺服器\n" # (Abel) 參考 slat.org #~ msgid "" #~ "This program is distributed in the hope that it will be useful,\n" #~ "but WITHOUT ANY WARRANTY; without even the implied warranty of\n" #~ "MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n" #~ "GNU General Public License for more details.\n" #~ msgstr "" #~ "本程式係基於使用目的而加以散布，然而不負任何擔保責任；\n" #~ "亦無對適售性或特定目的適用性所為的默示性擔保。\n" #~ "詳情請參照 GNU 通用公共授權。\n" #~ msgid "%s: Certificate verification error for %s: %s\n" #~ msgstr "%s：檢驗 %s 的憑證時發生錯誤：%s\n" #~ msgid "Failed writing to proxy: %s.\n" #~ msgstr "無法寫入代理伺服器: %s。\n" #~ msgid "File `%s' already there, will not retrieve.\n" #~ msgstr "檔案‘%s’已存在，不會下載。\n" #~ msgid "" #~ "%s (%s) - `%s' saved [%s/%s])\n" #~ "\n" #~ msgstr "" #~ "%s (%s) - 已儲存 ‘%s’ [%s/%s])\n" #~ "\n" #~ msgid "Empty host" #~ msgstr "沒有主機名稱"