# Chinese Simplified translation about findutils
# Copyright (C) 2002, 2008 Free Software Foundation, Inc.
# This file is distributed under the same license as the findutils package.
# Wang Li <charles@linux.net.cn>, 2002.
# Ji ZhengYu <zhengyuji@gmail.com>, 2008, 2009, 2010, 2011, 2012, 2013
# Boyuan Yang <073plan@gmail.com>, 2018
# Wenbin Lv <wenbin816@gmail.com>, 2022
msgid ""
msgstr ""
"Project-Id-Version: findutils-4.9.0\n"
"Report-Msgid-Bugs-To: bug-findutils@gnu.org\n"
"POT-Creation-Date: 2022-02-02 01:18+0100\n"
"PO-Revision-Date: 2022-11-02 20:20+0800\n"
"Last-Translator: Wenbin Lv <wenbin816@gmail.com>\n"
"Language-Team: Chinese (simplified) <i18n-zh@googlegroups.com>\n"
"Language: zh_CN\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=1; plural=0;\n"
"X-Bugs: Report translation errors to the Language-Team address.\n"
"X-Generator: Poedit 3.2\n"

#: find/exec.c:123
#, c-format
msgid "Failed to save working directory in order to run a command on %s"
msgstr "无法为在 %s 上运行命令而保存工作目录"

#: find/exec.c:243
#, c-format
msgid "Cannot close standard input"
msgstr "无法关闭标准输入"

#: find/exec.c:272
#, c-format
msgid "Failed to change directory%s%s"
msgstr "无法变更目录%s%s"

#: find/exec.c:317 xargs/xargs.c:1322
msgid "cannot fork"
msgstr "无法 fork"

#: find/exec.c:348
#, c-format
msgid "error waiting for %s"
msgstr "等待 %s 时出错"

#: find/exec.c:357
#, c-format
msgid "%s terminated by signal %d"
msgstr "%s 由于信号 %d 而终止"

#: find/fstype.c:240
msgid "Cannot read mounted file system list"
msgstr "无法读取已挂载的文件系统列表"

#: find/fstype.c:270
msgid "unknown"
msgstr "未知"

#: find/ftsfind.c:231
#, c-format
msgid "Symbolic link %s is part of a loop in the directory hierarchy; we have already visited the directory to which it points."
msgstr "符号链接 %s 是目录层次结构中一个循环的一部分；我们已经访问过它所指向的目录。"

#: find/ftsfind.c:245
#, c-format
msgid "File system loop detected; %s is part of the same file system loop as %s."
msgstr "探测到文件系统循环；%s 是 %s 所处于的文件系统循环的一部分。"

#: find/ftsfind.c:394 find/util.c:259
#, c-format
msgid "WARNING: file %s appears to have mode 0000"
msgstr "警告：文件 %s 的权限模式似乎是 0000"

#: find/ftsfind.c:509
#, c-format
msgid "cannot search %s"
msgstr "无法查找 %s"

#: find/ftsfind.c:555
#, c-format
msgid "failed to restore working directory after searching %s"
msgstr "无法在查找 %s 后还原工作目录"

#: find/ftsfind.c:582
#, c-format
msgid "extra operand %s"
msgstr "多余的操作对象 %s"

#: find/ftsfind.c:584
msgid "file operands cannot be combined with -files0-from"
msgstr "不能同时指定要操作的文件和 -files0-from 选项"

#: find/ftsfind.c:595
msgid "option -files0-from reading from standard input cannot be combined with -ok, -okdir"
msgstr "指定了 -files0-from 选项并从标准输入读取时，不能同时指定 -ok、-okdir 选项"

#: find/ftsfind.c:598
msgid "(standard input)"
msgstr "（标准输入）"

#: find/ftsfind.c:606
#, c-format
msgid "cannot open %s for reading"
msgstr "无法打开 %s 进行读取"

#: find/ftsfind.c:625
msgid "option -files0-from: standard input must not refer to the same file when combined with -ok, -okdir"
msgstr "-files0-from 选项：指定了 -ok、-okdir 时，不能与标准输入指向同一个文件"

#: find/ftsfind.c:668
#, c-format
msgid "%s: read error"
msgstr "%s: 读取错误"

#: find/ftsfind.c:695
msgid "invalid zero-length file name"
msgstr "无效的零长度文件名"

#: find/ftsfind.c:719
#, c-format
msgid "error reading %s"
msgstr "读取 %s 时出错"

#: find/ftsfind.c:754
msgid "Failed to initialize shared-file hash table"
msgstr "初始化共享文件哈希表失败"

#: find/ftsfind.c:770 locate/frcode.c:222 locate/locate.c:1568
#: xargs/xargs.c:434
msgid "The atexit library function failed"
msgstr "atexit() 库函数失败"

#: find/parser.c:451
msgid "The -delete action automatically turns on -depth, but -prune does nothing when -depth is in effect.  If you want to carry on anyway, just explicitly use the -depth option."
msgstr "-delete 动作自动开启了 -depth 选项，但当 -depth 选项生效时 -prune 将没有效果。如果您想继续执行，您只需要显式地使用 -depth 选项。"

#: find/parser.c:609
#, c-format
msgid "warning: you have specified the global option %s after the argument %s, but global options are not positional, i.e., %s affects tests specified before it as well as those specified after it.  Please specify global options before other arguments."
msgstr "警告：您在参数 %2$s 之后指定了全局选项 %1$s，但全局选项不是位置选项，也就是说，%3$s 对在它之前和之后指定的测试均有效。请在其他参数之前指定全局选项。"

#: find/parser.c:912
#, c-format
msgid "warning: the -d option is deprecated; please use -depth instead, because the latter is a POSIX-compliant feature."
msgstr "警告：-d 选项已废弃；请使用 -depth 代替，因为后者符合 POSIX 标准。"

#: find/parser.c:1167
#, c-format
msgid "%s is not the name of an existing group and it does not look like a numeric group ID because it has the unexpected suffix %s"
msgstr "%s 不是已存在用户组的名称，并且它看起来不像数字形式的用户组 ID，因为它有个非预期的后缀 %s"

#: find/parser.c:1182
#, c-format
msgid "%s is not the name of an existing group"
msgstr "%s 不是已存在用户组的名称"

#: find/parser.c:1188
msgid "argument to -group is empty, but should be a group name"
msgstr "-group 的参数为空，但应该给出一个用户组名"

#: find/parser.c:1261
msgid "sanity check of the fnmatch() library function failed."
msgstr "fnmatch() 库函数的健全性检测失败。"

#: find/parser.c:1276
#, c-format
msgid "warning: %s matches against basenames only, but the given pattern contains a directory separator (%s), thus the expression will evaluate to false all the time.  Did you mean %s?"
msgstr "警告：%s 仅匹配文件名本身，但您指定的匹配模式中含有目录分隔符 (%s)，因此该表达式的求值结果将总是为假。您需要的是不是 %s？"

#: find/parser.c:1399
#, c-format
msgid "Expected a positive decimal integer argument to %s, but got %s"
msgstr "%s 需要一个十进制的正整数作为参数，但却使用了 %s"

#: find/parser.c:1564
#, c-format
msgid "This system does not provide a way to find the birth time of a file."
msgstr "此系统未提供获取文件创建时间的方法。"

#: find/parser.c:1585
#, c-format
msgid "The %s test needs an argument"
msgstr "%s 测试需要参数"

#: find/parser.c:1622
#, c-format
msgid "I cannot figure out how to interpret %s as a date or time"
msgstr "我不知道如何将 %s 解释为日期或时间"

#: find/parser.c:1639
#, c-format
msgid "Cannot obtain birth time of file %s"
msgstr "无法获得文件 %s 的创建时间"

#: find/parser.c:1783
#, c-format
msgid "warning: -%s %s will not match anything because it ends with /."
msgstr "警告：-%s %s 将无法匹配任何内容，因为它以 / 结尾。"

#: find/parser.c:1878
#, c-format
msgid "invalid mode %s"
msgstr "无效的权限模式 %s"

#: find/parser.c:1896
#, c-format
msgid "warning: you have specified a mode pattern %s (which is equivalent to /000). The meaning of -perm /000 has now been changed to be consistent with -perm -000; that is, while it used to match no files, it now matches all files."
msgstr "警告：您指定了权限模式 %s（它等价于 /000）。-perm /000 的意思现在已经改为和 -perm 000 一样了；也就是说，以前它不匹配任何文件，而现在它匹配所有文件。"

#: find/parser.c:2069
#, c-format
msgid "failed to compile regular expression '%s': %s"
msgstr "无法编译正则表达式 \"%s\"：%s"

#: find/parser.c:2098
msgid "invalid null argument to -size"
msgstr "-size 的空参数无效"

#: find/parser.c:2148
#, c-format
msgid "invalid -size type `%c'"
msgstr "无效的 -size 类型 \"%c\""

#: find/parser.c:2158
#, c-format
msgid "Invalid argument `%s%s' to -size"
msgstr "-size 的参数 \"%s%s\" 无效"

#: find/parser.c:2340
msgid "The -show-control-chars option takes a single argument which must be 'literal' or 'safe'"
msgstr "-show-control-chars 选项仅接受一个参数，它必须是 \"literal\" 或 \"safe\""

#: find/parser.c:2454
#, c-format
msgid "Invalid argument %s to -used"
msgstr "-used 的参数 %s 无效"

#: find/parser.c:2495
#, c-format
msgid "%s is not the name of a known user"
msgstr "用户名 %s 未知"

#: find/parser.c:2502
msgid "The argument to -user should not be empty"
msgstr "-user 选项的参数不可以为空"

#: find/parser.c:2527
#, c-format
msgid "Features enabled: "
msgstr "启用的特性："

#: find/parser.c:2588
msgid "invalid predicate -context: SELinux is not enabled."
msgstr "无效的谓词 -context：SELinux 未启用。"

#: find/parser.c:2652
#, c-format
msgid "Arguments to %s should contain at least one letter"
msgstr "%s 的参数应当包含至少一个字母"

#: find/parser.c:2717
#, c-format
msgid "%s %c is not supported because symbolic links are not supported on the platform find was compiled on."
msgstr "不支持 %s %c，因为 find 编译时所用平台不支持符号链接。"

#: find/parser.c:2729
#, c-format
msgid "%s %c is not supported because FIFOs are not supported on the platform find was compiled on."
msgstr "不支持 %s %c，因为 find 编译时所用平台不支持 FIFO。"

#: find/parser.c:2741
#, c-format
msgid "%s %c is not supported because named sockets are not supported on the platform find was compiled on."
msgstr "不支持 %s %c，因为 find 编译时所用平台不支持命名套接字。"

#: find/parser.c:2757
#, c-format
msgid "%s %c is not supported because Solaris doors are not supported on the platform find was compiled on."
msgstr "不支持 %s %c，因为 find 编译时所用平台不支持 Solaris 门 (door)。"

#: find/parser.c:2765
#, c-format
msgid "Unknown argument to %s: %c"
msgstr "%s 的参数未知：%c"

#: find/parser.c:2773
#, c-format
msgid "Duplicate file type '%c' in the argument list to %s."
msgstr "%2$s 的参数列表中存在重复的文件类型 \"%1$c\"。"

#: find/parser.c:2789
#, c-format
msgid "Must separate multiple arguments to %s using: ','"
msgstr "%s 的多个参数之间必须以 \",\" 隔开"

#: find/parser.c:2798
#, c-format
msgid "Last file type in list argument to %s is missing, i.e., list is ending on: ','"
msgstr "%s 的参数列表缺少最后一个文件类型，也就是说，列表以 \",\" 结尾"

#: find/parser.c:2857
#, c-format
msgid "The current directory is included in the PATH environment variable, which is insecure in combination with the %s action of find.  Please remove the current directory from your $PATH (that is, remove \".\", doubled colons, or leading or trailing colons)"
msgstr "PATH 环境变量中含有当前目录，这对于 find 的 %s 动作而言是不安全的。请从您的 $PATH 变量中删除当前目录（即删除 \".\"、双冒号或变量首尾的冒号）"

#: find/parser.c:2869
#, c-format
msgid "The relative path %s is included in the PATH environment variable, which is insecure in combination with the %s action of find.  Please remove that entry from $PATH"
msgstr "PATH 环境变量中含有相对路径 %s，这对于 find 的 %s 动作而言是不安全的。请从 $PATH 变量中删除那个条目"

#: find/parser.c:2980
msgid "You may not use {} within the utility name for -execdir and -okdir, because this is a potential security problem."
msgstr "您不可以在 -execdir 和 -okdir 调用的实用工具名称中使用 {}，因为这会带来潜在的安全问题。"

#: find/parser.c:3006
#, c-format
msgid "Only one instance of {} is supported with -exec%s ... +"
msgstr "-exec%s ... + 仅支持一个 {} 实例"

#: find/parser.c:3016
#, c-format
msgid "In %s the %s must appear by itself, but you specified %s"
msgstr "%s 中 %s 必须单独使用，但您指定了 %s"

#: find/parser.c:3035
msgid "The environment is too large for exec()."
msgstr "对 exec() 操作来说执行环境过大。"

#: find/parser.c:3204
#, c-format
msgid "arithmetic overflow while converting %s days to a number of seconds"
msgstr "将 %s 天换算为秒数时出现算术溢出"

#: find/parser.c:3228
msgid "arithmetic overflow when trying to calculate the end of today"
msgstr "尝试计算今日的结束时刻时出现算术溢出"

#: find/parser.c:3387
msgid "standard error"
msgstr "标准错误"

#: find/parser.c:3392
msgid "standard output"
msgstr "标准输出"

#: find/pred.c:260
#, c-format
msgid "cannot delete %s"
msgstr "无法删除 %s"

#: find/pred.c:650
#, c-format
msgid "WARNING: cannot determine birth time of file %s"
msgstr "警告：无法确定文件 %s 的创建时间"

#: find/pred.c:698
#, c-format
msgid "< %s ... %s > ? "
msgstr "< %s ... %s > ? "

#: find/pred.c:700
msgid "Failed to write prompt for -ok"
msgstr "无法为 -ok 写入提示符"

#: find/pred.c:1173 find/print.c:1238
#, c-format
msgid "getfilecon failed: %s"
msgstr "getfilecon 失败：%s"

#: find/print.c:335
#, c-format
msgid "warning: escape `\\' followed by nothing at all"
msgstr "警告：转义字符 \"\\\" 后未跟随任何其他字符"

#: find/print.c:354
#, c-format
msgid "warning: unrecognized escape `\\%c'"
msgstr "警告：无法识别的转义字符 \"\\%c\""

#: find/print.c:374 find/print.c:1260
#, c-format
msgid "error: %s at end of format string"
msgstr "错误：%s 位于格式字符串的末尾"

#: find/print.c:398
#, c-format
msgid "error: the format directive `%%%c' is reserved for future use"
msgstr "错误：格式指令 \"%%%c\" 是保留给将来使用的"

#: find/print.c:406
#, c-format
msgid "warning: format directive `%%%c' should be followed by another character"
msgstr "警告：格式指令 \"%%%c\" 后面应该跟一个字符"

#: find/print.c:414
#, c-format
msgid "warning: unrecognized format directive `%%%c'"
msgstr "警告：不可识别的格式指令 \"%%%c\""

#: find/tree.c:115 find/tree.c:120 find/tree.c:226 find/tree.c:265
msgid "invalid expression"
msgstr "无效的表达式"

#: find/tree.c:126
#, c-format
msgid "invalid expression; you have used a binary operator '%s' with nothing before it."
msgstr "无效的表达式；您在二元操作符 \"%s\" 前未加任何东西。"

#: find/tree.c:135 find/tree.c:194
#, c-format
msgid "invalid expression: expected expression before closing parentheses '%s'."
msgstr "无效的表达式：右括号 \"%s\" 之前需要表达式。"

#: find/tree.c:145
#, c-format
msgid "expected an expression between '%s' and ')'"
msgstr "在 \"%s\" 和 \")\" 之间需要一个表达式"

#: find/tree.c:155
#, c-format
msgid "expected an expression after '%s'"
msgstr "在 \"%s\" 后需要一个表达式"

#: find/tree.c:160
msgid "invalid expression; you have too many ')'"
msgstr "无效的表达式；您使用了太多的 \")\""

#: find/tree.c:183
#, c-format
msgid "invalid expression; expected to find a ')' but didn't see one. Perhaps you need an extra predicate after '%s'"
msgstr "无效的表达式；需要一个 \")\" 但未找到。也许您需要在 \"%s\" 后加上额外的谓词"

#: find/tree.c:198
msgid "invalid expression; empty parentheses are not allowed."
msgstr "无效的表达式；不允许使用空的圆括号。"

#: find/tree.c:204
msgid "invalid expression; I was expecting to find a ')' somewhere but did not see one."
msgstr "无效的表达式；我希望能在某处找到 \")\"，但未找到。"

#: find/tree.c:211 find/tree.c:835
msgid "oops -- invalid expression type!"
msgstr "哎呀 -- 无效的表达式类型！"

#: find/tree.c:283
#, c-format
msgid "oops -- invalid expression type (%d)!"
msgstr "哎呀 -- 无效的表达式类型 (%d)！"

#: find/tree.c:1112
#, c-format
msgid "warning: there is no entry in the predicate evaluation cost table for predicate %s; please report this as a bug"
msgstr "警告：谓词求值开销表中没有谓词 %s 的项；请报告错误"

#: find/tree.c:1286
#, c-format
msgid "paths must precede expression: `%s'"
msgstr "路径必须在表达式之前：\"%s\""

#: find/tree.c:1288
#, c-format
msgid "possible unquoted pattern after predicate `%s'?"
msgstr "谓词 \"%s\" 后的匹配模式可能未加引号？"

#: find/tree.c:1298
#, c-format
msgid "unknown predicate `%s'"
msgstr "未知的谓词 \"%s\""

#: find/tree.c:1318
#, c-format
msgid "invalid predicate `%s'"
msgstr "无效的谓词 \"%s\""

#: find/tree.c:1322
#, c-format
msgid "invalid argument `%s' to `%s'"
msgstr "\"%2$s\" 的参数 \"%1$s\" 无效"

#: find/tree.c:1329
#, c-format
msgid "missing argument to `%s'"
msgstr "\"%s\" 缺少参数"

#: find/tree.c:1405
msgid "you have too many ')'"
msgstr "您使用了太多的 \")\""

#: find/tree.c:1411
#, c-format
msgid "unexpected extra predicate '%s'"
msgstr "未预期的额外谓词 \"%s\""

#: find/tree.c:1413
msgid "unexpected extra predicate"
msgstr "未预期的额外谓词"

#: find/tree.c:1534
msgid "oops -- invalid default insertion of and!"
msgstr "哎呀 -- 默认插入的 and 无效！"

#: find/util.c:139
msgid "Valid arguments for -D:\n"
msgstr "-D 选项有效的参数为：\n"

#: find/util.c:163 locate/frcode.c:142 locate/locate.c:1365 xargs/xargs.c:1702
#, c-format
msgid "Try '%s --help' for more information.\n"
msgstr "请尝试执行 \"%s --help\" 来获取更多信息。\n"

#: find/util.c:169
#, c-format
msgid "Usage: %s [-H] [-L] [-P] [-Olevel] [-D debugopts] [path...] [expression]\n"
msgstr "用法：%s [-H] [-L] [-P] [-O级别] [-D 调试选项] [路径...] [表达式]\n"

#: find/util.c:173
msgid ""
"\n"
"Default path is the current directory; default expression is -print.\n"
"Expression may consist of: operators, options, tests, and actions.\n"
msgstr ""
"\n"
"默认路径为当前目录；默认表达式为 -print。\n"
"表达式可以包含：操作符、选项、测试以及动作。\n"

#: find/util.c:176
msgid ""
"\n"
"Operators (decreasing precedence; -and is implicit where no others are given):\n"
"      ( EXPR )   ! EXPR   -not EXPR   EXPR1 -a EXPR2   EXPR1 -and EXPR2\n"
"      EXPR1 -o EXPR2   EXPR1 -or EXPR2   EXPR1 , EXPR2\n"
msgstr ""
"\n"
"操作符（优先级递减；未使用其他操作符时隐含使用 -and）：\n"
"      ( 表达式 )   ! 表达式   -not 表达式   表达式1 -a 表达式2\n"
"      表达式1 -and 表达式2   表达式1 -o 表达式2   表达式1 -or 表达式2\n"
"      表达式1 , 表达式2\n"

#: find/util.c:180
msgid ""
"\n"
"Positional options (always true):\n"
"      -daystart -follow -nowarn -regextype -warn\n"
msgstr ""
"\n"
"位置选项（总是为真）：\n"
"      -daystart -follow -nowarn -regextype -warn\n"

#: find/util.c:183
msgid ""
"\n"
"Normal options (always true, specified before other expressions):\n"
"      -depth -files0-from FILE -maxdepth LEVELS -mindepth LEVELS\n"
"       -mount -noleaf -xdev -ignore_readdir_race -noignore_readdir_race\n"
msgstr ""
"\n"
"普通选项（总是为真，在其它表达式之前指定）：\n"
"      -depth -files0-from 文件 -maxdepth 层数 -mindepth 层数\n"
"      -mount -noleaf -xdev -ignore_readdir_race -noignore_readdir_race\n"

#: find/util.c:187
msgid ""
"\n"
"Tests (N can be +N or -N or N):\n"
"      -amin N -anewer FILE -atime N -cmin N -cnewer FILE -context CONTEXT\n"
"      -ctime N -empty -false -fstype TYPE -gid N -group NAME -ilname PATTERN\n"
"      -iname PATTERN -inum N -iwholename PATTERN -iregex PATTERN\n"
"      -links N -lname PATTERN -mmin N -mtime N -name PATTERN -newer FILE\n"
"      -nouser -nogroup -path PATTERN -perm [-/]MODE -regex PATTERN\n"
"      -readable -writable -executable\n"
"      -wholename PATTERN -size N[bcwkMG] -true -type [bcdpflsD] -uid N\n"
"      -used N -user NAME -xtype [bcdpfls]\n"
msgstr ""
"\n"
"测试（N 可以是 +N 或 -N 或 N）：\n"
"      -amin N -anewer 文件 -atime N -cmin N -cnewer 文件 -context 上下文\n"
"      -ctime N -empty -false -fstype 类型 -gid N -group 名称 -ilname 匹配模式\n"
"      -iname 匹配模式 -inum N -iwholename 匹配模式 -iregex 匹配模式\n"
"      -links N -lname 匹配模式 -mmin N -mtime N -name 匹配模式 -newer 文件\n"
"      -nouser -nogroup -path 匹配模式 -perm [-/]权限模式 -regex 匹配模式\n"
"      -readable -writable -executable\n"
"      -wholename 匹配模式 -size N[bcwkMG] -true -type [bcdpflsD] -uid N\n"
"      -used N -user 名字 -xtype [bcdpfls]\n"

#: find/util.c:197
msgid ""
"\n"
"Actions:\n"
"      -delete -print0 -printf FORMAT -fprintf FILE FORMAT -print \n"
"      -fprint0 FILE -fprint FILE -ls -fls FILE -prune -quit\n"
"      -exec COMMAND ; -exec COMMAND {} + -ok COMMAND ;\n"
"      -execdir COMMAND ; -execdir COMMAND {} + -okdir COMMAND ;\n"
msgstr ""
"\n"
"动作：\n"
"      -delete -print0 -printf 格式 -fprintf 文件 格式 -print \n"
"      -fprint0 文件 -fprint 文件 -ls -fls 文件 -prune -quit\n"
"      -exec 命令 ; -exec 命令 {} + -ok 命令 ;\n"
"      -execdir 命令 ; -execdir 命令 {} + -okdir 命令 ;\n"

#: find/util.c:204
msgid ""
"\n"
"Other common options:\n"
msgstr ""
"\n"
"其他常用选项：\n"

#: find/util.c:206 xargs/xargs.c:1751
msgid "      --help                   display this help and exit\n"
msgstr "      --help                   显示此帮助信息并退出\n"

#: find/util.c:207 xargs/xargs.c:1752
msgid ""
"      --version                output version information and exit\n"
"\n"
msgstr ""
"      --version                显示版本信息并退出\n"
"\n"

#: find/util.c:210
msgid ""
"\n"
"Use '-D help' for a description of the options, or see find(1)\n"
"\n"
msgstr ""
"\n"
"使用 \"-D help\" 以查看选项描述，或阅读 find(1)\n"
"\n"

#: find/util.c:475
#, c-format
msgid "Failed to save initial working directory%s%s"
msgstr "无法保存初始工作目录%s%s"

#: find/util.c:494
#, c-format
msgid "Failed to restore initial working directory%s%s"
msgstr "无法恢复初始工作目录%s%s"

#: find/util.c:832
#, c-format
msgid "Ignoring unrecognised debug flag %s"
msgstr "忽略无法识别的调试标志 %s"

#: find/util.c:839
#, c-format
msgid "Empty argument to the -D option."
msgstr "-D 选项的参数为空。"

#: find/util.c:856
msgid "The -O option must be immediately followed by a decimal integer"
msgstr "-O 选项后面必须跟一个十进制整数"

#: find/util.c:866 find/util.c:877
msgid "Please specify a decimal number immediately after -O"
msgstr "请在 -O 选项后面指定一个十进制数"

#: find/util.c:882 find/util.c:887
#, c-format
msgid "Invalid optimisation level %s"
msgstr "无效的优化级别 %s"

#: find/util.c:895
#, c-format
msgid "Optimisation level %lu is too high.  If you want to find files very quickly, consider using GNU locate."
msgstr "优化级别 %lu 太高了。如果您想很快地找到文件，请考虑使用 GNU locate。"

#: find/util.c:941
#, c-format
msgid "Missing argument after the -D option."
msgstr "-D 选项之后缺少参数。"

#: find/util.c:1044
msgid "The environment variable FIND_BLOCK_SIZE is not supported, the only thing that affects the block size is the POSIXLY_CORRECT environment variable"
msgstr "不支持环境变量 FIND_BLOCK_SIZE，仅环境变量 POSIXLY_CORRECT 会影响块大小"

#: lib/bugreports.c:28
#, c-format
msgid ""
"Please see also the documentation at %s.\n"
"You can report (and track progress on fixing) bugs in the \"%s\"\n"
"program via the %s bug-reporting page at\n"
"%s or, if\n"
"you have no web access, by sending email to <%s>.\n"
msgstr ""
"也请阅读 %1$s 中的文档。\n"
"您可以使用 %4$s 上的 %3$s 错误报告页面\n"
"报告 \"%2$s\" 程序中的错误，以及跟踪错误修复进度。\n"
"如果您无法浏览网页，请发送电子邮件至 <%5$s>。\n"

#: lib/buildcmd.c:144
msgid "command too long"
msgstr "命令过长"

#: lib/buildcmd.c:284
msgid "can't call exec() due to argument size restrictions"
msgstr "由于参数大小限制，无法调用 exec()"

#: lib/buildcmd.c:349
msgid "cannot fit single argument within argument list size limit"
msgstr "无法在参数列表大小限制中适配单一参数"

#: lib/buildcmd.c:355
msgid "argument list too long"
msgstr "参数列表过长"

#: lib/buildcmd.c:612
#, c-format
msgid "Environment variable %s is not set to a valid decimal number"
msgstr "环境变量 %s 未设为一个有效的十进制数"

#: lib/fdleak.c:391
#, c-format
msgid "File descriptor %d will leak; please report this as a bug, remembering to include a detailed description of the simplest way to reproduce this problem."
msgstr "文件描述符 %d 泄漏；请报告错误，记得带上重现这一问题的最简方法的详细说明。"

#: lib/findutils-version.c:49
msgid "Eric B. Decker"
msgstr "Eric B. Decker"

#: lib/findutils-version.c:50
msgid "James Youngman"
msgstr "James Youngman"

#: lib/findutils-version.c:51
msgid "Kevin Dalley"
msgstr "Kevin Dalley"

#: lib/listfile.c:454
#, c-format
msgid "Failed to write output (at stage %d)"
msgstr "无法写入输出（在第 %d 阶段）"

#: lib/regextype.c:98
#, c-format
msgid "Unknown regular expression type %s; valid types are %s."
msgstr "未知的正则表达式类型 %s；有效的类型是 %s。"

#: lib/safe-atoi.c:68
#, c-format
msgid "Unexpected suffix %s on %s"
msgstr "在 %2$s 中有非预期的后缀 %1$s"

#: lib/safe-atoi.c:74
#, c-format
msgid "Expected an integer: %s"
msgstr "需要一个整数：%s"

#: locate/frcode.c:147
#, c-format
msgid "Usage: %s [-0 | --null] [--version] [--help]\n"
msgstr "用法：%s [-0 | --null] [--version] [--help]\n"

#: locate/frcode.c:169
msgid "You need to specify a security level as a decimal integer."
msgstr "指定的安全等级应当为十进制整数。"

#: locate/frcode.c:177
#, c-format
msgid "Security level %s is outside the convertible range."
msgstr "安全等级 %s 超出可转换范围。"

#: locate/frcode.c:185
#, c-format
msgid "Security level %s has unexpected suffix %s."
msgstr "安全等级 %s 有非预期的后缀 %s。"

#: locate/frcode.c:199
msgid "write error"
msgstr "写入错误"

#: locate/frcode.c:246
#, c-format
msgid "slocate security level %ld is unsupported."
msgstr "不支持 slocate 安全等级 %ld。"

#: locate/frcode.c:265
#, c-format
msgid "no argument expected."
msgstr "不需要参数。"

#: locate/frcode.c:282
msgid "Failed to write to standard output"
msgstr "无法写入标准输出"

#: locate/frcode.c:291
#, c-format
msgid "The input file should end with the delimiter"
msgstr "输入文件需要以分隔符结束"

#: locate/locate.c:112
msgid "days"
msgstr "天"

#: locate/locate.c:160
msgid "The argument for option --max-database-age must not be empty"
msgstr "--max-database-age 选项的参数不允许为空"

#: locate/locate.c:176 locate/locate.c:183
#, c-format
msgid "Invalid argument %s for option --max-database-age"
msgstr "--max-database-age 选项的参数 %s 无效"

#: locate/locate.c:433
#, c-format
msgid "locate database %s contains a filename longer than locate can handle"
msgstr "locate 数据库 %s 包含一个 locate 无法处理的过长的文件名"

#: locate/locate.c:544 locate/locate.c:563
#, c-format
msgid "locate database %s is corrupt or invalid"
msgstr "locate 数据库 %s 损坏或无效"

#: locate/locate.c:848
#, c-format
msgid "Database was last modified at %s.%09ld"
msgstr "数据库最近一次修改时间为 %s.%09ld"

#: locate/locate.c:856
#, c-format
msgid "Locate database size: %s byte\n"
msgid_plural "Locate database size: %s bytes\n"
msgstr[0] "Locate 数据库大小：%s 字节\n"

#: locate/locate.c:862
#, c-format
msgid "Matching Filenames: %s\n"
msgstr "匹配的文件名：%s\n"

#: locate/locate.c:863
#, c-format
msgid "All Filenames: %s\n"
msgstr "所有文件名：%s\n"

#: locate/locate.c:869
#, c-format
msgid ""
"File names have a cumulative length of %s bytes.\n"
"Of those file names,\n"
"\n"
"\t%s contain whitespace, \n"
"\t%s contain newline characters, \n"
"\tand %s contain characters with the high bit set.\n"
msgstr ""
"文件名的累计长度为 %s 字节。\n"
"在这些文件名中，\n"
"\n"
"\t有 %s 个含有空格，\n"
"\t有 %s 个含有换行符，\n"
"\t有 %s 个含有最高位为 1 的字符。\n"

#: locate/locate.c:883
#, c-format
msgid "Some filenames may have been filtered out, so we cannot compute the compression ratio.\n"
msgstr "某些文件名可能被过滤掉了，因此我们无法计算压缩率。\n"

#: locate/locate.c:896
#, c-format
msgid "Compression ratio %4.2f%% (higher is better)\n"
msgstr "压缩比 %4.2f%%（越高越好）\n"

#: locate/locate.c:903
#, c-format
msgid "Compression ratio is undefined\n"
msgstr "压缩比未定义\n"

#: locate/locate.c:958
#, c-format
msgid "locate database %s looks like an slocate database but it seems to have security level %c, which GNU findutils does not currently support"
msgstr "locate 数据库 %s 看上去像是一个 slocate 数据库，但它的安全等级似乎是 %c，而目前 GNU findutils 不支持此安全等级"

#: locate/locate.c:1080
#, c-format
msgid "%s is an slocate database of unsupported security level %d; skipping it."
msgstr "%s 是一个 slocate 数据库，但它的安全等级 %d 不受支持；跳过。"

#: locate/locate.c:1097
#, c-format
msgid "You specified the -E option, but that option cannot be used with slocate-format databases with a non-zero security level.  No results will be generated for this database.\n"
msgstr "您指定了 -E 选项，但此选项不能用于安全等级非零的 slocate 格式的数据库。此数据库不会生成任何结果。\n"

#: locate/locate.c:1108
#, c-format
msgid "%s is an slocate database.  Turning on the '-e' option."
msgstr "%s 是一个 slocate 数据库。启用 \"-e\" 选项。"

#: locate/locate.c:1146
#, c-format
msgid "Old-format locate database %s is too short to be valid"
msgstr "旧格式的 locate 数据库 %s 长度太短，因此无效"

#: locate/locate.c:1298
#, c-format
msgid "Database %s is in the %s format.\n"
msgstr "数据库 %s 的格式为 %s。\n"

#: locate/locate.c:1325
msgid "The database has little-endian machine-word encoding.\n"
msgstr "此数据库的机器字编码顺序为小端序。\n"

#: locate/locate.c:1327
msgid "The database has big-endian machine-word encoding.\n"
msgstr "此数据库的机器字编码顺序为大端序。\n"

#: locate/locate.c:1340
#, c-format
msgid "The database machine-word encoding order is not obvious.\n"
msgstr "此数据库的机器字编码顺序不明确。\n"

#: locate/locate.c:1369
#, c-format
msgid ""
"Usage: %s [-d path | --database=path] [-e | -E | --[non-]existing]\n"
"      [-i | --ignore-case] [-w | --wholename] [-b | --basename] \n"
"      [--limit=N | -l N] [-S | --statistics] [-0 | --null] [-c | --count]\n"
"      [-P | -H | --nofollow] [-L | --follow] [-m | --mmap] [-s | --stdio]\n"
"      [-A | --all] [-p | --print] [-r | --regex] [--regextype=TYPE]\n"
"      [--max-database-age D] [--version] [--help]\n"
"      pattern...\n"
msgstr ""
"用法：%s [-d 路径 | --database=路径] [-e | -E | --[non-]existing]\n"
"      [-i | --ignore-case] [-w | --wholename] [-b | --basename] \n"
"      [--limit=N | -l N] [-S | --statistics] [-0 | --null] [-c | --count]\n"
"      [-P | -H | --nofollow] [-L | --follow] [-m | --mmap ] [ -s | --stdio ]\n"
"      [-A | --all] [-p | --print] [-r | --regex ] [--regextype=类型]\n"
"      [--max-database-age D] [--version] [--help]\n"
"      匹配模式...\n"

#: locate/locate.c:1435
msgid "failed to drop group privileges"
msgstr "无法放弃组特权"

#: locate/locate.c:1453
msgid "failed to drop setuid privileges"
msgstr "无法放弃 setuid 特权"

#: locate/locate.c:1467
msgid "Failed to fully drop privileges"
msgstr "无法完全放弃特权"

#: locate/locate.c:1485
msgid "failed to drop setgid privileges"
msgstr "无法放弃 setgid 特权"

#: locate/locate.c:1722
#, c-format
msgid "pattern argument expected"
msgstr "需要匹配模式作为参数"

#: locate/locate.c:1763
#, c-format
msgid "warning: the locate database can only be read from stdin once."
msgstr "警告：仅能从标准输入读取一次 locate 数据库。"

#: locate/locate.c:1836
#, c-format
msgid "time system call failed"
msgstr "time 系统调用失败"

#: locate/locate.c:1847
#, c-format
msgid "warning: database %s is more than %u %s old (actual age is %.1f %s)"
msgstr "警告：数据库 %s 的年龄超过 %u %s（实际年龄为 %.1f %s）"

#: locate/word_io.c:77
#, c-format
msgid "WARNING: locate database %s was built with a different byte order"
msgstr "警告：locate 数据库 %s 以不同的字节序构建"

#: locate/word_io.c:123
#, c-format
msgid "unexpected EOF in %s"
msgstr "在 %s 中有非预期的 EOF"

#: locate/word_io.c:126
#, c-format
msgid "error reading a word from %s"
msgstr "从 %s 中读取字时出错"

#: xargs/xargs.c:254
#, c-format
msgid "Invalid escape sequence %s in input delimiter specification."
msgstr "指定的输入分隔符中存在无效的转义序列 %s。"

#: xargs/xargs.c:272
#, c-format
msgid "Invalid escape sequence %s in input delimiter specification; character values must not exceed %lx."
msgstr "指定的输入分隔符中存在无效的转义序列 %s；字符值不能超过 %lx。"

#: xargs/xargs.c:279
#, c-format
msgid "Invalid escape sequence %s in input delimiter specification; character values must not exceed %lo."
msgstr "指定的输入分隔符中存在无效的转义序列 %s；字符值不能超过 %lo。"

#: xargs/xargs.c:289
#, c-format
msgid "Invalid escape sequence %s in input delimiter specification; trailing characters %s not recognised."
msgstr "指定的输入分隔符中存在无效的转义序列 %s；无法识别后续的字符 %s。"

#: xargs/xargs.c:335
#, c-format
msgid "Invalid input delimiter specification %s: the delimiter must be either a single character or an escape sequence starting with \\."
msgstr "指定的输入分隔符 %s 无效：分隔符要么是单一字符，要么是以 \\ 开头的转义序列。"

#: xargs/xargs.c:354
msgid "environment is too large for exec"
msgstr "环境对 exec 来说过大"

#: xargs/xargs.c:391
#, c-format
msgid "warning: options %s and %s are mutually exclusive, ignoring previous %s value"
msgstr "警告：选项 %s 和 %s 互斥，已忽略之前的 %s 值"

#: xargs/xargs.c:636
#, c-format
msgid "warning: value %ld for -s option is too large, using %ld instead"
msgstr "警告：-s 选项的值 %ld 太大了，已使用 %ld 代替"

#: xargs/xargs.c:687
#, c-format
msgid "option --%s may not be set to a value which includes `='"
msgstr "选项 --%s 不允许设置为包含 \"=\" 的值"

#: xargs/xargs.c:699
#, c-format
msgid "failed to unset environment variable %s"
msgstr "无法取消设置环境变量 %s"

#: xargs/xargs.c:712
#, c-format
msgid "warning: the -E option has no effect if -0 or -d is used.\n"
msgstr "警告：使用了 -0 或 -d 选项时，-E 选项没有效果。\n"

#: xargs/xargs.c:734
#, c-format
msgid "Cannot set SIGUSR1 signal handler"
msgstr "无法设置 SIGUSR1 信号处理程序"

#: xargs/xargs.c:740
#, c-format
msgid "Cannot set SIGUSR2 signal handler"
msgstr "无法设置 SIGUSR2 信号处理程序"

#: xargs/xargs.c:756
#, c-format
msgid "Cannot open input file %s"
msgstr "无法打开输入文件 %s"

#: xargs/xargs.c:775
#, c-format
msgid "Your environment variables take up %<PRIuMAX> bytes\n"
msgstr "您的环境变量占据了 %<PRIuMAX> 字节的空间\n"

#: xargs/xargs.c:778
#, c-format
msgid "POSIX upper limit on argument length (this system): %<PRIuMAX>\n"
msgstr "此系统中 POSIX 允许的参数长度上限：%<PRIuMAX>\n"

#: xargs/xargs.c:781
#, c-format
msgid "POSIX smallest allowable upper limit on argument length (all systems): %<PRIuMAX>\n"
msgstr "所有系统中 POSIX 允许的参数长度上限的最小值：%<PRIuMAX>\n"

#: xargs/xargs.c:784
#, c-format
msgid "Maximum length of command we could actually use: %<PRIuMAX>\n"
msgstr "我们实际可以使用的最大命令长度：%<PRIuMAX>\n"

#: xargs/xargs.c:787
#, c-format
msgid "Size of command buffer we are actually using: %<PRIuMAX>\n"
msgstr "我们实际正在使用的命令缓冲区的大小：%<PRIuMAX>\n"

#: xargs/xargs.c:790
#, c-format
msgid "Maximum parallelism (--max-procs must be no greater): %<PRIuMAX>\n"
msgstr "最大并行数（--max-procs 不得大于该值）：%<PRIuMAX>\n"

#: xargs/xargs.c:796
#, c-format
msgid ""
"\n"
"Execution of xargs will continue now, and it will try to read its input and run commands; if this is not what you wanted to happen, please type the end-of-file keystroke.\n"
msgstr ""
"\n"
"现在将继续执行 xargs 命令，并且它会尝试读取输入并运行命令；如果您不希望此过程发生，请按下 \"文件结束\" 按键 (ctrl-D)。\n"

#: xargs/xargs.c:804
#, c-format
msgid "Warning: %s will be run at least once.  If you do not want that to happen, then press the interrupt keystroke.\n"
msgstr "警告：%s 将至少运行一次。如果您不希望此过程发生，请按下中断按键 (ctrl-C)。\n"

#: xargs/xargs.c:933 xargs/xargs.c:1028
#, c-format
msgid "unmatched %s quote; by default quotes are special to xargs unless you use the -0 option"
msgstr "未匹配的%s引号；默认情况下，引号对于 xargs 是有特殊含义的，除非您使用了 -0 选项"

#: xargs/xargs.c:935 xargs/xargs.c:1030
msgid "double"
msgstr "双"

#: xargs/xargs.c:935 xargs/xargs.c:1030
msgid "single"
msgstr "单"

#: xargs/xargs.c:1049
#, c-format
msgid "WARNING: a NUL character occurred in the input.  It cannot be passed through in the argument list.  Did you mean to use the --null option?"
msgstr "警告：输入中存在 NUL 字符。它不能通过参数列表进行传递。您是想使用 --null 选项吗？"

#: xargs/xargs.c:1059 xargs/xargs.c:1124
msgid "argument line too long"
msgstr "参数行过长"

#: xargs/xargs.c:1146 xargs/xargs.c:1163
msgid "Failed to write to stderr"
msgstr "无法写入标准错误"

#: xargs/xargs.c:1159
msgid "failed to open /dev/tty for reading"
msgstr "无法打开 /dev/tty 用于读取"

#: xargs/xargs.c:1169
msgid "Failed to read from stdin"
msgstr "无法读取标准输入"

#: xargs/xargs.c:1205
#, c-format
msgid "failed to set environment variable %s"
msgstr "无法设置环境变量 %s"

#: xargs/xargs.c:1259
msgid "failed to redirect standard input of the child process"
msgstr "无法重定向子进程的标准输入"

#: xargs/xargs.c:1311
msgid "could not create pipe before fork"
msgstr "无法在 fork 之前创建管道"

#: xargs/xargs.c:1382
#, c-format
msgid "errno-buffer safe_read failed in xargs_do_exec (this is probably a bug, please report it)"
msgstr "xargs_do_exec 中的 errno-buffer safe_read 失败（这可能是个错误，请报告给我们）"

#: xargs/xargs.c:1435
#, c-format
msgid "read returned unexpected value %<PRIuMAX>; this is probably a bug, please report it"
msgstr "读取操作返回了非预期的值 %<PRIuMAX>；这可能是个错误，请报告给我们"

#: xargs/xargs.c:1528
msgid "error waiting for child process"
msgstr "等待子进程时出错"

#: xargs/xargs.c:1561
#, c-format
msgid "WARNING: Lost track of %lu child processes"
msgstr "警告：已失去对 %lu 个子进程的跟踪"

#: xargs/xargs.c:1580
#, c-format
msgid "%s: exited with status 255; aborting"
msgstr "%s: 以状态 255 退出；中止"

#: xargs/xargs.c:1583
#, c-format
msgid "%s: stopped by signal %d"
msgstr "%s: 因信号 %d 而停止"

#: xargs/xargs.c:1586
#, c-format
msgid "%s: terminated by signal %d"
msgstr "%s: 因信号 %d 而终止"

#: xargs/xargs.c:1671
#, c-format
msgid "%s: invalid number \"%s\" for -%c option\n"
msgstr "%1$s: 选项 -%3$c 的数值 \"%2$s\" 无效\n"

#: xargs/xargs.c:1678
#, c-format
msgid "%s: value %s for -%c option should be >= %ld\n"
msgstr "%1$s: 选项 -%3$c 的值 %2$s 应当 >= %4$ld\n"

#: xargs/xargs.c:1687
#, c-format
msgid "%s: value %s for -%c option should be <= %ld\n"
msgstr "%1$s: 选项 -%3$c 的值 %2$s 应当 <= %4$ld\n"

#: xargs/xargs.c:1707
#, c-format
msgid "Usage: %s [OPTION]... COMMAND [INITIAL-ARGS]...\n"
msgstr "用法：%s [选项]... 命令 [起始参数]...\n"

#: xargs/xargs.c:1712
msgid ""
"Run COMMAND with arguments INITIAL-ARGS and more arguments read from input.\n"
"\n"
msgstr "使用指定的 <起始参数> 加上从输入读取的后续的参数运行指定的 <命令>。\n"

#: xargs/xargs.c:1714
msgid ""
"Mandatory and optional arguments to long options are also\n"
"mandatory or optional for the corresponding short option.\n"
msgstr "长选项的必需和可选参数对于相应的短选项同样是必需或可选的。\n"

#: xargs/xargs.c:1716
msgid ""
"  -0, --null                   items are separated by a null, not whitespace;\n"
"                                 disables quote and backslash processing and\n"
"                                 logical EOF processing\n"
msgstr ""
"  -0, --null                   各个项目以 null 字符进行分隔，而不是空白字符；\n"
"                                 同时禁用对引号和反斜杠的处理，以及对逻辑 EOF\n"
"                                 的处理\n"

#: xargs/xargs.c:1719
msgid "  -a, --arg-file=FILE          read arguments from FILE, not standard input\n"
msgstr "  -a, --arg-file=文件          从 <文件> 读取参数，而不是标准输入\n"

#: xargs/xargs.c:1720
msgid ""
"  -d, --delimiter=CHARACTER    items in input stream are separated by CHARACTER,\n"
"                                 not by whitespace; disables quote and backslash\n"
"                                 processing and logical EOF processing\n"
msgstr ""
"  -d, --delimiter=字符         输入流的各个项目以指定 <字符> 进行分隔，\n"
"                                 而不是空白字符；同时禁用对引号和反斜杠的\n"
"                                 处理，以及对逻辑 EOF 的处理\n"

#: xargs/xargs.c:1723
msgid ""
"  -E END                       set logical EOF string; if END occurs as a line\n"
"                                 of input, the rest of the input is ignored\n"
"                                 (ignored if -0 or -d was specified)\n"
msgstr ""
"  -E 终止符                    设置逻辑 EOF 字符串；如果输入中遇到单独一行的\n"
"                                 <终止符>，则忽略剩余的输入内容\n"
"                                 （若使用了 -0 或 -d 选项，则该选项失效）\n"

#: xargs/xargs.c:1726
msgid ""
"  -e, --eof[=END]              equivalent to -E END if END is specified;\n"
"                                 otherwise, there is no end-of-file string\n"
msgstr ""
"  -e, --eof[=终止符]           在指定 <终止符> 的情况下与 \"-E 终止符\" 等价；\n"
"                                 否则，视为未设置 EOF 字符串\n"

#: xargs/xargs.c:1728
msgid "  -I R                         same as --replace=R\n"
msgstr "  -I R                         等于 --replace=R\n"

#: xargs/xargs.c:1729
msgid ""
"  -i, --replace[=R]            replace R in INITIAL-ARGS with names read\n"
"                                 from standard input, split at newlines;\n"
"                                 if R is unspecified, assume {}\n"
msgstr ""
"  -i, --replace[=R]            将 <起始参数> 中的 R 替换为从标准输入\n"
"                                 读取的名称，以换行隔开；\n"
"                                 如果未指定 R，则默认值为 {}\n"

#: xargs/xargs.c:1732
msgid ""
"  -L, --max-lines=MAX-LINES    use at most MAX-LINES non-blank input lines per\n"
"                                 command line\n"
msgstr "  -L, --max-lines=最大行数     每个命令行使用最多 <最大行数> 行非空输入行\n"

#: xargs/xargs.c:1734
msgid ""
"  -l[MAX-LINES]                similar to -L but defaults to at most one non-\n"
"                                 blank input line if MAX-LINES is not specified\n"
msgstr ""
"  -l[最大行数]                 类似 -L，但在没有指定 <最大行数> 时默认为使用\n"
"                                 最多一行非空输入行\n"

#: xargs/xargs.c:1736
msgid "  -n, --max-args=MAX-ARGS      use at most MAX-ARGS arguments per command line\n"
msgstr "  -n, --max-args=最大参数数量  每个命令行最多使用 <最大参数数量> 个参数\n"

#: xargs/xargs.c:1737
msgid ""
"  -o, --open-tty               Reopen stdin as /dev/tty in the child process\n"
"                                 before executing the command; useful to run an\n"
"                                 interactive application.\n"
msgstr ""
"  -o, --open-tty               执行命令之前，在子进程中将标准输入重新打开为\n"
"                                 /dev/tty；在执行交互式程序时很有用。\n"

#: xargs/xargs.c:1740
msgid "  -P, --max-procs=MAX-PROCS    run at most MAX-PROCS processes at a time\n"
msgstr "  -P, --max-procs=最大进程数   最多同时运行 <最大进程数量> 个进程\n"

#: xargs/xargs.c:1741
msgid "  -p, --interactive            prompt before running commands\n"
msgstr "  -p, --interactive            运行命令前询问\n"

#: xargs/xargs.c:1742
msgid "      --process-slot-var=VAR   set environment variable VAR in child processes\n"
msgstr "      --process-slot-var=变量  在子进程中设置名为 <变量> 的环境变量\n"

#: xargs/xargs.c:1743
msgid ""
"  -r, --no-run-if-empty        if there are no arguments, then do not run COMMAND;\n"
"                                 if this option is not given, COMMAND will be\n"
"                                 run at least once\n"
msgstr ""
"  -r, --no-run-if-empty        如果没有指定任何参数，则不运行指定的 <命令>；\n"
"                                 如果未使用该选项，指定的 <命令> 将至少运行一次\n"

#: xargs/xargs.c:1746
msgid "  -s, --max-chars=MAX-CHARS    limit length of command line to MAX-CHARS\n"
msgstr "  -s, --max-chars=最大字符数   限制命令行的长度最长为 <最大字符数>\n"

#: xargs/xargs.c:1747
msgid "      --show-limits            show limits on command-line length\n"
msgstr "      --show-limits            显示命令行长度的限制\n"

#: xargs/xargs.c:1748
msgid "  -t, --verbose                print commands before executing them\n"
msgstr "  -t, --verbose                执行命令前输出命令内容\n"

#: xargs/xargs.c:1749
msgid "  -x, --exit                   exit if the size (see -s) is exceeded\n"
msgstr "  -x, --exit                   如果大小（见 -s）超出限制则退出\n"

#~ msgid "cannot stat current directory"
#~ msgstr "无法 stat 当前目录"

#~ msgid "Cannot read list of mounted devices."
#~ msgstr "无法读取已挂载的设备列表。"

#~ msgid "WARNING: file system %s has recently been unmounted."
#~ msgstr "警告：文件系统 %s 刚刚被卸载。"

#~ msgid "WARNING: file system %s has recently been mounted."
#~ msgstr "警告：文件系统 %s 刚刚被挂载。"

#~ msgid "%s%s changed during execution of %s (old device number %ld, new device number %ld, file system type is %s) [ref %ld]"
#~ msgstr "%3$s 执行期间 %1$s%2$s 改变了（旧的设备号 %4$ld，新的设备号 %5$ld，文件系统类型 %6$s）[ref %7$ld]"

#~ msgid "%s%s changed during execution of %s (old inode number %<PRIuMAX>, new inode number %<PRIuMAX>, file system type is %s) [ref %ld]"
#~ msgstr "%3$s 执行期间 %1$s%2$s 改变了（旧的 inode 号 %4$<PRIuMAX>，新的 inode 号 %5$<PRIuMAX>，文件系统类型 %6$s）[ref %7$ld]"

#~ msgid "failed to return to parent directory"
#~ msgstr "无法返回父目录"

#~ msgid "Failed to safely change directory into %s"
#~ msgstr "无法安全地变更目录至 %s"

#~ msgid "Filesystem loop detected; %s has the same device number and inode as a directory which is %d level higher in the file system hierarchy"
#~ msgid_plural "Filesystem loop detected; %s has the same device number and inode as a directory which is %d levels higher in the file system hierarchy"
#~ msgstr[0] "探测到文件系统循环；%s 的设备号和 inode 与一个在文件系统层次结构中比它高 %d 层的目录相同"

#~ msgid "warning: not following the symbolic link %s"
#~ msgstr "警告：不跟随符号链接 %s"

#~ msgid "WARNING: Hard link count is wrong for %s (saw only st_nlink=%<PRIuMAX> but we already saw %<PRIuMAX> subdirectories): this may be a bug in your file system driver.  Automatically turning on find's -noleaf option.  Earlier results may have failed to include directories that should have been searched."
#~ msgstr "警告：%s 的硬链接计数错误（仅查到 st_nlink=%<PRIuMAX> 但我们已经查到 %<PRIuMAX> 个子目录）：可能您的文件系统驱动中存在错误。已自动启用 find 的 -noleaf 选项。之前的查找结果可能会遗漏原本应当查找的目录。"

#~ msgid ""
#~ "      -nouser -nogroup -path PATTERN -perm [-/]MODE -regex PATTERN\n"
#~ "      -readable -writable -executable\n"
#~ "      -wholename PATTERN -size N[bcwkMG] -true -type [bcdpflsD] -uid N\n"
#~ "      -used N -user NAME -xtype [bcdpfls]"
#~ msgstr ""
#~ "      -nouser -nogroup -path 匹配模式 -perm [-/]权限模式 -regex 匹配模式\n"
#~ "      -readable -writable -executable\n"
#~ "      -wholename 匹配模式 -size N[bcwkMG] -true -type [bcdpflsD] -uid N\n"
#~ "      -used N -user 名称 -xtype [bcdpfls]"

#~ msgid "      -context CONTEXT\n"
#~ msgstr "      -context 上下文\n"

#~ msgid "warning: Unix filenames usually don't contain slashes (though pathnames do).  That means that '%s %s' will probably evaluate to false all the time on this system.  You might find the '-wholename' test more useful, or perhaps '-samefile'.  Alternatively, if you are using GNU grep, you could use 'find ... -print0 | grep -FzZ %s'."
#~ msgstr "警告：Unix 文件名通常不包括 / 符号（但路径名中有这个符号）。这意味着在此系统上 \"%s %s\" 的值可能总是为假。也许 \"-wholename\" 或 \"-samefile\" 测试会更有用。或者，如果您使用 GNU grep，您可使用 \"find ... -print0 | grep -FzZ %s\"。"

#~ msgid "] [path...] [expression]\n"
#~ msgstr "] [路径...] [表达式]\n"

#~ msgid "invalid argument %s for %s"
#~ msgstr "\"%2$s\" 的参数 %1$s 无效"

#~ msgid "ambiguous argument %s for %s"
#~ msgstr "\"%2$s\" 的参数 %1$s 有歧义"

#~ msgid "error closing file"
#~ msgstr "关闭文件时出错"

#~ msgid "Unknown system error"
#~ msgstr "未知的系统错误"

#~ msgid "%s: option '%s' is ambiguous; possibilities:"
#~ msgstr "%s: 选项 \"%s\" 有歧义；可能是："

#~ msgid "%s: option '--%s' doesn't allow an argument\n"
#~ msgstr "%s: 选项 \"--%s\" 不接受参数\n"

#~ msgid "%s: option '%c%s' doesn't allow an argument\n"
#~ msgstr "%s: 选项 \"%c%s\" 不接受参数\n"

#~ msgid "%s: option '--%s' requires an argument\n"
#~ msgstr "%s: 选项 \"--%s\" 需要一个参数\n"

#~ msgid "%s: unrecognized option '--%s'\n"
#~ msgstr "%s: 无法识别的选项 \"--%s\"\n"

#~ msgid "%s: unrecognized option '%c%s'\n"
#~ msgstr "%s: 无法识别的选项 \"%c%s\"\n"

#~ msgid "%s: invalid option -- '%c'\n"
#~ msgstr "%s: 无效的选项 -- \"%c\"\n"

#~ msgid "%s: option requires an argument -- '%c'\n"
#~ msgstr "%s: 选项需要一个参数 -- \"%c\"\n"

#~ msgid "%s: option '-W %s' is ambiguous\n"
#~ msgstr "%s: 选项 \"-W %s\" 有歧义\n"

#~ msgid "%s: option '-W %s' doesn't allow an argument\n"
#~ msgstr "%s: 选项 \"-W %s\" 不接受参数\n"

#~ msgid "%s: option '-W %s' requires an argument\n"
#~ msgstr "%s: 选项 \"-W %s\" 需要一个参数\n"

#~ msgid "unable to record current working directory"
#~ msgstr "无法记录当前工作目录"

#~ msgid "failed to return to initial working directory"
#~ msgstr "返回到初始工作目录失败"

#~ msgid "`"
#~ msgstr "\""

#~ msgid "'"
#~ msgstr "\""

#~ msgid "^[yY]"
#~ msgstr "^[yY]"

#~ msgid "^[nN]"
#~ msgstr "^[nN]"

#~ msgid "Packaged by %s (%s)\n"
#~ msgstr "由 %s (%s) 打包\n"

#~ msgid "Packaged by %s\n"
#~ msgstr "由 %s 打包\n"

#~ msgid "(C)"
#~ msgstr "©"

#~ msgid ""
#~ "\n"
#~ "License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>.\n"
#~ "This is free software: you are free to change and redistribute it.\n"
#~ "There is NO WARRANTY, to the extent permitted by law.\n"
#~ "\n"
#~ msgstr ""
#~ "\n"
#~ "许可证 GPLv3+：GNU 通用公共许可证第 3 版或更新版本 <https://gnu.org/licenses/gpl.html>。\n"
#~ "本软件是自由软件：您可以自由修改和重新发布它。\n"
#~ "在法律允许的范围内，不提供任何保证。\n"
#~ "\n"

#~ msgid "Written by %s.\n"
#~ msgstr "由 %s 编写。\n"

#~ msgid "Written by %s and %s.\n"
#~ msgstr "由 %s 和 %s 编写。\n"

#~ msgid "Written by %s, %s, and %s.\n"
#~ msgstr "由 %s、%s 和 %s 编写。\n"

#~ msgid ""
#~ "Written by %s, %s, %s,\n"
#~ "and %s.\n"
#~ msgstr ""
#~ "由 %s、%s、%s 和\n"
#~ "%s 编写。\n"

#~ msgid ""
#~ "Written by %s, %s, %s,\n"
#~ "%s, and %s.\n"
#~ msgstr ""
#~ "由 %s、%s、%s、\n"
#~ "%s 和 %s 编写。\n"

#~ msgid ""
#~ "Written by %s, %s, %s,\n"
#~ "%s, %s, and %s.\n"
#~ msgstr ""
#~ "由 %s、%s、%s、\n"
#~ "%s、%s 和 %s 编写。\n"

#~ msgid ""
#~ "Written by %s, %s, %s,\n"
#~ "%s, %s, %s, and %s.\n"
#~ msgstr ""
#~ "由 %s、%s、%s、\n"
#~ "%s、%s、%s 和 %s 编写。\n"

#~ msgid ""
#~ "Written by %s, %s, %s,\n"
#~ "%s, %s, %s, %s,\n"
#~ "and %s.\n"
#~ msgstr ""
#~ "由 %s、%s、%s、\n"
#~ "%s、%s、%s、%s 和\n"
#~ "%s 编写。\n"

#~ msgid ""
#~ "Written by %s, %s, %s,\n"
#~ "%s, %s, %s, %s,\n"
#~ "%s, and %s.\n"
#~ msgstr ""
#~ "由 %s、%s、%s、\n"
#~ "%s、%s、%s、%s、\n"
#~ "%s 和 %s 编写。\n"

#~ msgid ""
#~ "Written by %s, %s, %s,\n"
#~ "%s, %s, %s, %s,\n"
#~ "%s, %s, and others.\n"
#~ msgstr ""
#~ "由 %s、%s、%s、\n"
#~ "%s、%s、%s、%s、\n"
#~ "%s、%s 和其他人编写。\n"

#~ msgid ""
#~ "\n"
#~ "Report bugs to: %s\n"
#~ msgstr ""
#~ "\n"
#~ "请向 <%s> 报告软件错误。\n"
#~ "请向 <i18n-zh@googlegroups.com> 报告翻译错误。\n"

#~ msgid "Report %s bugs to: %s\n"
#~ msgstr "请向 %2$s 报告 %1$s 的错误\n"

#~ msgid "%s home page: <%s>\n"
#~ msgstr "%s 的主页：<%s>\n"

#~ msgid "%s home page: <http://www.gnu.org/software/%s/>\n"
#~ msgstr "%s 的主页：<https://www.gnu.org/software/%s/>\n"

#~ msgid "General help using GNU software: <http://www.gnu.org/gethelp/>\n"
#~ msgstr "GNU 软件一般性帮助：<https://www.gnu.org/gethelp/>\n"

#~ msgid "memory exhausted"
#~ msgstr "内存耗尽"

#~ msgid "invalid %s%s argument '%s'"
#~ msgstr "%s%s 的参数 \"%s\" 无效"

#~ msgid "invalid suffix in %s%s argument '%s'"
#~ msgstr "%s%s 的参数 \"%s\" 有无效后缀"

#~ msgid "%s%s argument '%s' too large"
#~ msgstr "%s%s 的参数 \"%s\" 过长"

#~ msgid ""
#~ "Usage: %s [--version | --help]\n"
#~ "or     %s most_common_bigrams < file-list > locate-database\n"
#~ msgstr ""
#~ "用法：%s [--version | --help]\n"
#~ "或者  %s 最常见的二元语法 < 文件列表 > locate数据库\n"

#~ msgid ""
#~ "\n"
#~ "Report bugs to <bug-findutils@gnu.org>.\n"
#~ msgstr ""
#~ "\n"
#~ "将错误报告发送到 <bug-findutils@gnu.org>。\n"

#~ msgid "%s is an slocate database.  Support for these is new, expect problems for now."
#~ msgstr "%s 是一个 slocate 数据库。对此类型数据库的支持是新开发的，目前可能存在一些问题。"

#~ msgid "unable to allocate memory"
#~ msgstr "无法分配内存"

#~ msgid "Mode %s is not valid when POSIXLY_CORRECT is on."
#~ msgstr "当开启 POSIXLY_CORRECT 时模式 %s 无效。"

#~ msgid ""
#~ "\n"
#~ "Mandatory arguments to long options are mandatory for short options too.\n"
#~ "Non-mandatory arguments are indicated by [square brackets]\n"
#~ "  -0, --null                   Items are separated by a null, not whitespace.\n"
#~ "                               Disables quote and backslash processing\n"
#~ "  -a, --arg-file=FILE          Read arguments from FILE, not standard input\n"
#~ "  -d, --delimiter=CHARACTER    Input items are separated by CHARACTER, not by\n"
#~ "                               blank space. Disables quote and backslash\n"
#~ "                               processing\n"
#~ "  -E END                       If END occurs as a line of input, the rest of\n"
#~ "                               the input is ignored.\n"
#~ "  -e [END], --eof[=END]        Equivalent to -E END if END is specified.\n"
#~ "                               Otherwise, there is no end-of-file string\n"
#~ "  --help                       Print a summary of the options to xargs.\n"
#~ "  -I R                         same as --replace=R (R must be specified)\n"
#~ "  -i,--replace=[R]             Replace R in initial arguments with names\n"
#~ "                               read from standard input. If R is\n"
#~ "                               unspecified, assume {}\n"
#~ "  -L,-l, --max-lines=MAX-LINES Use at most MAX-LINES nonblank input lines per\n"
#~ "                               command line\n"
#~ "  -l                           Use at most one nonblank input line per\n"
#~ "                               command line\n"
#~ "  -n, --max-args=MAX-ARGS      Use at most MAX-ARGS arguments per command\n"
#~ "                               line\n"
#~ "  -P, --max-procs=MAX-PROCS    Run up to max-procs processes at a time\n"
#~ "  -p, --interactive            Prompt before running commands\n"
#~ "  --process-slot-var=VAR       Set environment variable VAR in child\n"
#~ "                               processes\n"
#~ "  -r, --no-run-if-empty        If there are no arguments, run no command.\n"
#~ "                               If this option is not given, COMMAND will be\n"
#~ "                               run at least once.\n"
#~ "  -s, --max-chars=MAX-CHARS    Limit commands to MAX-CHARS at most\n"
#~ "  --show-limits                Show limits on command-line length.\n"
#~ "  -t, --verbose                Print commands before executing them\n"
#~ "  --version                    Print the version number\n"
#~ "  -x, --exit                   Exit if the size (see -s) is exceeded\n"
#~ msgstr ""
#~ "\n"
#~ "选项完整形式可用的参数也适用于其缩写形式。\n"
#~ "可选参数被一对方括号括起\"[参数]\"\n"
#~ "  -0, --null                   条目以 null分隔，而非空格。\n"
#~ "                               不处理引号和反斜杠\n"
#~ "  -a, --arg-file=FILE          从 FILE中获取参数，而非标准输入\n"
#~ "  -d, --delimiter=CHARACTER    输入项由 CHARACTER分隔，而非空格。\n"
#~ "                               不处理引号反斜杠\n"
#~ "\n"
#~ "  -E END                       若以 END作为一行输入的结尾，余下输入均忽略。\n"
#~ "                    \n"
#~ "  -e [END], --eof[=END]        若指定 END，则等同于 -E END。\n"
#~ "                               否则无文件结尾字串。\n"
#~ "  --help                       打印 xargs选项的帮助说明。\n"
#~ "  -I R                         等同于 --replace=R (R 必须指定)\n"
#~ "  -i,--replace=[R]             以标准输入所读取的名字代替起始参数中的 R。\n"
#~ "                               若未定义 R，则假定{}\n"
#~ "\n"
#~ "  -L,-l, --max-lines=MAX-LINES 每行命令最多用 MAX-LINES个非空输入\n"
#~ "\n"
#~ "  -l                           每行命令最多用一个非空输入\n"
#~ "\n"
#~ "  -n, --max-args=MAX-ARGS      每行命令最多用 MAX-ARGS个参数\n"
#~ "\n"
#~ "  -P, --max-procs=MAX-PROCS    一次最多运行 MAX-PROCS个进程\n"
#~ "  -p, --interactive            交互式运行命令\n"
#~ "  --process-slot-var=VAR       在子进程中设置环境变量 VAR。\n"
#~ "\n"
#~ "  -r, --no-run-if-empty        若无参数则不运行命令。\n"
#~ "                               若不指定此选项，COMMAND 将至少运行一次。\n"
#~ "\n"
#~ "  -s, --max-chars=MAX-CHARS    最多 MAX-CHARS条命令\n"
#~ "  --show-limits                在命令行中显示限制。\n"
#~ "  -t, --verbose                在运行命令前打印\n"
#~ "  --version                    打印版本号\n"
#~ "  -x, --exit                   若超出 size(参看 -s)则退出\n"

#~ msgid "cannot get current directory"
#~ msgstr "无法获取当前目录"

#~ msgid "Built using GNU gnulib version %s\n"
#~ msgstr "以 GNU gnulib 版本 %s 构建\n"

#~ msgid ""
#~ "Usage: %s [-0prtx] [--interactive] [--null] [-d|--delimiter=delim]\n"
#~ "       [-E eof-str] [-e[eof-str]]  [--eof[=eof-str]]\n"
#~ "       [-L max-lines] [-l[max-lines]] [--max-lines[=max-lines]]\n"
#~ "       [-I replace-str] [-i[replace-str]] [--replace[=replace-str]]\n"
#~ "       [-n max-args] [--max-args=max-args]\n"
#~ "       [-s max-chars] [--max-chars=max-chars]\n"
#~ "       [-P max-procs]  [--max-procs=max-procs] [--show-limits]\n"
#~ "       [--verbose] [--exit] [--no-run-if-empty] [--arg-file=file]\n"
#~ "       [--version] [--help] [command [initial-arguments]]\n"
#~ msgstr ""
#~ "用法: %s [-0prtx] [--interactive] [--null] [-d|--delimiter=delim]\n"
#~ "       [-E eof-str] [-e[eof-str]]  [--eof[=eof-str]]\n"
#~ "       [-L max-lines] [-l[max-lines]] [--max-lines[=max-lines]]\n"
#~ "       [-I replace-str] [-i[replace-str]] [--replace[=replace-str]]\n"
#~ "       [-n max-args] [--max-args=max-args]\n"
#~ "       [-s max-chars] [--max-chars=max-chars]\n"
#~ "       [-P max-procs]  [--max-procs=max-procs] [--show-limits]\n"
#~ "       [--verbose] [--exit] [--no-run-if-empty] [--arg-file=file]\n"
#~ "       [--version] [--help] [command [initial-arguments]]\n"

#~ msgid "%s: illegal option -- %c\n"
#~ msgstr "%s：非法选项 -- %c\n"

#~ msgid "Success"
#~ msgstr "成功"

#~ msgid "No match"
#~ msgstr "没有匹配"

#~ msgid "Invalid collation character"
#~ msgstr "无效的校勘字符"

#~ msgid "Invalid character class name"
#~ msgstr "无效的字符类名"

#~ msgid "Trailing backslash"
#~ msgstr "末尾的反斜线"

#~ msgid "Invalid back reference"
#~ msgstr "无效的向后引用"

#~ msgid "Unmatched [ or [^"
#~ msgstr "不匹配的 [ 或 [^"

#~ msgid "Unmatched ( or \\("
#~ msgstr "不匹配的 ( 或 \\("

#~ msgid "Unmatched \\{"
#~ msgstr "不匹配的 \\{"

#~ msgid "Invalid content of \\{\\}"
#~ msgstr "无效的 \\{\\} 的内容"

#~ msgid "Invalid range end"
#~ msgstr "无效的结束范围"

#~ msgid "Memory exhausted"
#~ msgstr "内存耗尽"

#, fuzzy
#~ msgid "Invalid preceding regular expression"
#~ msgstr "无效正则表达式前缀"

#~ msgid "Premature end of regular expression"
#~ msgstr "正则表达式急于结束"

#~ msgid "Regular expression too big"
#~ msgstr "常规表达式过大"

#~ msgid "Unmatched ) or \\)"
#~ msgstr "不匹配的 ) 或 \\)"

#~ msgid "No previous regular expression"
#~ msgstr "没有上一个常规表达式"