# Traditional Chinese Messages for mailfromd
# Copyright (C) 2026 Free Software Foundation, Inc.
# This file is distributed under the same license as the mailfromd package.
# Alang Hsu <alang.hsu@gmail.com>, 2026.
#
msgid ""
msgstr ""
"Project-Id-Version: mailfromd 8.17.91\n"
"Report-Msgid-Bugs-To: bug-mailfromd@gnu.org.ua\n"
"POT-Creation-Date: 2023-07-20 16:49+0300\n"
"PO-Revision-Date: 2026-09-24 17:58+0800\n"
"Last-Translator: Alang Hsu <alang.hsu@gmail.com>\n"
"Language-Team: Chinese (traditional) <zh-l10n@lists.slat.org>\n"
"Language: zh_TW\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Bugs: Report translation errors to the Language-Team address.\n"
"Plural-Forms: nplurals=1; plural=0;\n"

#: gacopyz/gacopyz.c:21 gacopyz/io.c:176
#, c-format
msgid "send header: size=%lu, cmd=%c"
msgstr "傳送標頭：大小=%lu，命令=%c"

#: gacopyz/gacopyz.c:25 gacopyz/gacopyz.c:27 gacopyz/io.c:179
msgid "send data"
msgstr "傳送資料"

#: gacopyz/gacopyz.c:42
#, c-format
msgid "smfi_register: %s: version mismatch; application %d != implementation %d"
msgstr "smfi_register：%s：版本不符；應用程式 %d ≠ 實作 %d"

#: gacopyz/gacopyz.c:203 gacopyz/gacopyz.c:272
#, c-format
msgid "%s: %s: cannot unlink: %s"
msgstr "%s：%s：無法刪除：%s"

#: gacopyz/gacopyz.c:228
#, c-format
msgid "%s: invalid connection type: %s; port is meaningless for UNIX sockets"
msgstr "%s：無效的連線類型：%s；對 UNIX 插口而言連接埠無意義"

#: gacopyz/gacopyz.c:238
#, c-format
msgid "%s: %s: UNIX socket name too long"
msgstr "%s：%s：UNIX 插口名稱過長"

#: gacopyz/gacopyz.c:254
#, c-format
msgid "%s: %s: cannot stat socket: %s"
msgstr "%s：%s：無法 stat 插口：%s"

#: gacopyz/gacopyz.c:264
#, c-format
msgid "%s: %s: not a socket"
msgstr "%s：%s：不是插口"

#: gacopyz/gacopyz.c:290
#, c-format
msgid "%s: invalid connection type: %s; missing port number"
msgstr "%s：無效的連線類型：%s；缺少連接埠號碼"

#: gacopyz/gacopyz.c:301
#, c-format
msgid "%s: invalid connection type: %s; bad port number"
msgstr "%s：無效的連線類型：%s；無效的連接埠號碼"

#: gacopyz/gacopyz.c:313
#, c-format
msgid "%s: invalid connection type: %s; unknown port name"
msgstr "%s：無效的連線類型：%s；未知的連接埠名稱"

#: gacopyz/gacopyz.c:329
#, c-format
msgid "%s: unknown host name %s"
msgstr "%s：未知的主機名稱 %s"

#: gacopyz/gacopyz.c:344
#, c-format
msgid "%s: invalid connection type: %s; unsupported address family"
msgstr "%s：無效的連線類型：%s；不支援的位址家族"

#: gacopyz/gacopyz.c:367 gacopyz/gacopyz.c:1196 gacopyz/server.c:885
#: lib/srvman.c:259 src/builtin/io.bi:869
#, c-format
msgid "%s:%s: cannot parse address: %s"
msgstr "%s：%s：無法解析位址：%s"

#: gacopyz/gacopyz.c:374 gacopyz/gacopyz.c:1204 gacopyz/server.c:892
#: lib/srvman.c:265 src/builtin/io.bi:875
#, c-format
msgid "%s:%d: internal error converting %s:%s"
msgstr "%s：%d：內部錯誤轉換 %s：%s"

#: gacopyz/gacopyz.c:391 gacopyz/gacopyz.c:1222 gacopyz/server.c:911
#: src/builtin/io.bi:891
#, c-format
msgid "%s:%s: address length too big (%lu)"
msgstr "%s：%s：位址長度過大（%lu）"

#: gacopyz/gacopyz.c:406 gacopyz/server.c:926 lib/srvman.c:288
#, c-format
msgid "%s:%s resolves to several addresses; using %s:%s"
msgstr "%s：%s 解析為多個位址；使用 %s：%s"

#: gacopyz/gacopyz.c:416
#, c-format
msgid "%s: unsupported protocol: %s"
msgstr "%s：不支援的協定：%s"

#: gacopyz/gacopyz.c:425
#, c-format
msgid "%s: unable to create new socket: %s"
msgstr "%s：無法建立新插口：%s"

#: gacopyz/gacopyz.c:434
#, c-format
msgid "%s: cannot set close-on-exec: %s"
msgstr "%s：無法設定 close-on-exec：%s"

#: gacopyz/gacopyz.c:445
#, c-format
msgid "%s: set reuseaddr failed (%s)"
msgstr "%s：set reuseaddr 失敗（%s）"

#: gacopyz/gacopyz.c:457
#, c-format
msgid "%s: cannot bind to port %s: %s"
msgstr "%s：無法綁定至連接埠 %s：%s"

#: gacopyz/gacopyz.c:467
#, c-format
msgid "%s: cannot listen on port %s: %s"
msgstr "%s：無法在連接埠 %s 上監聽：%s"

#: gacopyz/gacopyz.c:487
msgid "empty or missing socket information"
msgstr "插口資訊為空或遺失"

#: gacopyz/gacopyz.c:494
#, c-format
msgid "%s: opening listen socket on %s"
msgstr "%s：正在開啟 %s 上的監聽插口"

#: gacopyz/gacopyz.c:650 gacopyz/gacopyz.c:718 gacopyz/io.c:41 gacopyz/io.c:115
#, c-format
msgid "%s: connection timed out"
msgstr "%s：連線逾時"

#: gacopyz/gacopyz.c:664 gacopyz/gacopyz.c:732 gacopyz/io.c:55 gacopyz/io.c:129
#, c-format
msgid "%s: exception on control fd"
msgstr "%s：控制檔案描述器上的例外"

#: gacopyz/gacopyz.c:676 gacopyz/io.c:67
#, c-format
msgid "%s: read failed: %s"
msgstr "%s：讀取失敗：%s"

#: gacopyz/gacopyz.c:684 gacopyz/io.c:75
#, c-format
msgid "%s: end of file"
msgstr "%s：檔案結尾"

#: gacopyz/gacopyz.c:744 gacopyz/io.c:141
#, c-format
msgid "%s: write failed: %s"
msgstr "%s：寫入失敗：%s"

#: gacopyz/gacopyz.c:752 gacopyz/io.c:149
#, c-format
msgid "%s: wrote 0 bytes"
msgstr "%s：寫入 0 位元組"

#: gacopyz/gacopyz.c:799 gacopyz/io.c:216
#, c-format
msgid "read header: size=%lu, cmd=%c"
msgstr "讀取標頭：大小=%lu，命令=%c"

#: gacopyz/gacopyz.c:807 gacopyz/gacopyz.c:809 gacopyz/io.c:223
msgid "read data"
msgstr "讀取資料"

#: gacopyz/gacopyz.c:907
#, c-format
msgid "%s: milter claimed not to reply in state %d, but it did"
msgstr "%s：milter 宣告在狀態 %d 中不回應，但實際上回應了"

#: gacopyz/gacopyz.c:1149
msgid "path too long"
msgstr "路徑過長"

#: gacopyz/gacopyz.c:1162
#, c-format
msgid "%s: shan_connect: inet_aton(%s) failed"
msgstr "%s：shan_connect：inet_aton(%s) 失敗"

#: gacopyz/gacopyz.c:1237
#, c-format
msgid "%s: shan_connect: unknown family %d"
msgstr "%s：shan_connect：未知的家族 %d"

#: gacopyz/gacopyz.c:1328
#, c-format
msgid "protocol version too old: %lu"
msgstr "協定版本過舊：%lu"

#: gacopyz/gacopyz.c:1377
#, c-format
msgid "xxfi_negotiate returned %d (protocol options=0x%lx, actions=0x%lx)"
msgstr "xxfi_negotiate 回傳 %d（協定選項=0x%lx，動作=0x%lx）"

#: gacopyz/gacopyz.c:1397
#, c-format
msgid "%s: shan_optneg: MTA flags %#lx do not match actions requirements %#lx"
msgstr "%s：shan_optneg：MTA 旗標 %#lx 不符合動作需求 %#lx"

#: gacopyz/gacopyz.c:1419
#, c-format
msgid "%s: shan_optneg: MTA flags %#lx do not match protocol requirements %#lx"
msgstr "%s：shan_optneg：MTA 旗標 %#lx 不符合協定需求 %#lx"

#: gacopyz/gacopyz.c:1626
#, c-format
msgid "state %s is unreachable from %s"
msgstr "狀態 %s 無法從 %s 到達"

#: gacopyz/gacopyz.c:1630
#, c-format
msgid "ignoring milter command: %c"
msgstr "正在忽略 milter 命令：%c"

#: gacopyz/gacopyz.c:1631
#, c-format
msgid "ignoring milter command: \\%03o"
msgstr "正在忽略 milter 命令：\\%03o"

#: gacopyz/gacopyz.c:1633 gacopyz/gacopyz.c:1711 gacopyz/gacopyz.c:1761
msgid "buffer"
msgstr "緩衝區"

#: gacopyz/gacopyz.c:1693
msgid "start of context loop"
msgstr "內容迴圈起點"

#: gacopyz/gacopyz.c:1707
#, c-format
msgid "unknown command: %c"
msgstr "未知的命令：%c"

#: gacopyz/gacopyz.c:1708
#, c-format
msgid "unknown command: \\%03o"
msgstr "未知的命令：\\%03o"

#: gacopyz/gacopyz.c:1723
#, c-format
msgid "state %s, next state %s"
msgstr "狀態 %s，下一個狀態 %s"

#: gacopyz/gacopyz.c:1732
#, c-format
msgid "transition from state %s to %s is prohibited"
msgstr "禁止從狀態 %s 轉換至 %s"

#: gacopyz/gacopyz.c:1759
msgid "argument parsing failed"
msgstr "引數解析失敗"

#: gacopyz/gacopyz.c:1793
#, c-format
msgid "%s handler returned failure"
msgstr "%s 處理常式回傳失敗"

#: gacopyz/gacopyz.c:1800
#, c-format
msgid "%s handler returned abort"
msgstr "%s 處理常式回傳中止"

#: gacopyz/gacopyz.c:1811
#, c-format
msgid "end of context loop: %d"
msgstr "內容迴圈結束：%d"

#: gacopyz/gacopyz.c:1843
#, c-format
msgid "accept failed: %s"
msgstr "accept 失敗：%s"

#: gacopyz/gacopyz.c:1851
msgid "connection refused by xxfi_accept"
msgstr "xxfi_accept 拒絕連線"

#: gacopyz/gacopyz.c:1861
#, c-format
msgid "fork() failed: %s"
msgstr "fork() 失敗：%s"

#: gacopyz/gacopyz.c:1891
#, c-format
msgid "connect from socket %s"
msgstr "從插口 %s 連線"

#: gacopyz/gacopyz.c:1898
#, c-format
msgid "connect from %s:%u"
msgstr "從 %s：%u 連線"

#: gacopyz/gacopyz.c:1906
#, c-format
msgid "connection from unsupported family: %d"
msgstr "來自不支援家族 %d 的連線"

#: gacopyz/gacopyz.c:1914
msgid "finishing connection"
msgstr "正在完成連線"

#: gacopyz/proc.c:64
#, c-format
msgid "child %lu exited successfully"
msgstr "子處理程序 %lu 已成功結束"

#: gacopyz/proc.c:69
#, c-format
msgid "child %lu failed with status %d"
msgstr "子處理程序 %lu 以狀態 %d 失敗"

#: gacopyz/proc.c:81
#, c-format
msgid "child %lu terminated on signal %d"
msgstr "子處理程序 %lu 因訊號 %d 而終止"

#: gacopyz/proc.c:86
#, c-format
msgid "child %lu stopped on signal %d"
msgstr "子處理程序 %lu 因訊號 %d 而停止"

#: gacopyz/proc.c:93
#, c-format
msgid "child %lu dumped core"
msgstr "子處理程序 %lu 傾印了核心"

#: gacopyz/proc.c:99
#, c-format
msgid "child %lu terminated with unrecognized status"
msgstr "子處理程序 %lu 以無法辨識的狀態終止"

#: gacopyz/proc.c:131
msgid "terminating subprocesses"
msgstr "正在終止子處理程序"

#: gacopyz/server.c:64
#, c-format
msgid "%s:%lu: not enough memory"
msgstr "%s：%lu：記憶體不足"

#: gacopyz/server.c:409 gacopyz/server.c:419
#, c-format
msgid "%s: not a valid X spec"
msgstr "%s：不是有效的 X 規格"

#: gacopyz/server.c:433
#, c-format
msgid "%s: not a valid X spec, missing = near %s"
msgstr "%s：不是有效的 X 規格，在 %s 附近缺少 ="

#: gacopyz/server.c:444 gacopyz/server.c:456 gacopyz/server.c:493
#, c-format
msgid "%s: not a valid X spec, duplicate field %s"
msgstr "%s：不是有效的 X 規格，欄位 %s 重複"

#: gacopyz/server.c:465 gacopyz/server.c:482
#, c-format
msgid "%s: not a valid X spec, invalid field %s"
msgstr "%s：不是有效的 X 規格，欄位 %s 無效"

#: gacopyz/server.c:525 gacopyz/server.c:533 gacopyz/server.c:553
#, c-format
msgid "%s: not a valid X spec, invalid T field near %s"
msgstr "%s：不是有效的 X 規格，在 %s 附近的 T 欄位無效"

#: gacopyz/server.c:569
#, c-format
msgid "%s: not a valid X spec, invalid delimiter near %s"
msgstr "%s：不是有效的 X 規格，在 %s 附近的分隔符無效"

#: gacopyz/server.c:601
#, c-format
msgid "%s: not a valid X spec, missing port"
msgstr "%s：不是有效的 X 規格，缺少連接埠"

#: gacopyz/server.c:772 src/builtin/io.bi:765
#, c-format
msgid "invalid connection type: %s; port is meaningless for UNIX sockets"
msgstr "無效的連線類型：%s；對 UNIX 插口而言連接埠無意義"

#: gacopyz/server.c:781 src/builtin/io.bi:771
#, c-format
msgid "%s: UNIX socket name too long"
msgstr "%s：UNIX 插口名稱過長"

#: gacopyz/server.c:792 src/builtin/io.bi:780
#, c-format
msgid "%s: cannot stat socket: %s"
msgstr "%s：無法 stat 插口：%s"

#: gacopyz/server.c:799 src/builtin/io.bi:786
#, c-format
msgid "%s: not a socket"
msgstr "%s：不是插口"

#: gacopyz/server.c:815 src/builtin/io.bi:800 src/builtin/io.bi:851
#, c-format
msgid "invalid connection type: %s; missing port number"
msgstr "無效的連線類型：%s；缺少連接埠號碼"

#: gacopyz/server.c:825 src/builtin/io.bi:808
#, c-format
msgid "invalid connection type: %s; bad port number"
msgstr "無效的連線類型：%s；無效的連接埠號碼"

#: gacopyz/server.c:835 src/builtin/io.bi:817
#, c-format
msgid "invalid connection type: %s; unknown port name"
msgstr "無效的連線類型：%s；未知的連接埠名稱"

#: gacopyz/server.c:849 src/builtin/io.bi:829
#, c-format
msgid "unknown host name %s"
msgstr "未知的主機名稱 %s"

#: gacopyz/server.c:862 src/builtin/io.bi:840
#, c-format
msgid "invalid connection type: %s; unsupported address family"
msgstr "無效的連線類型：%s；不支援的位址家族"

#: gacopyz/server.c:935 lib/srvman.c:298 src/builtin/io.bi:899
#, c-format
msgid "unsupported protocol: %s"
msgstr "不支援的協定：%s"

#: gacopyz/server.c:943 src/builtin/io.bi:906
#, c-format
msgid "unable to create new socket: %s"
msgstr "無法建立新插口：%s"

#: gacopyz/server.c:951
#, c-format
msgid "cannot bind to local address: %s"
msgstr "無法綁定位址到本機位址：%s"

#: gacopyz/server.c:984 src/builtin/io.bi:915
#, c-format
msgid "cannot connect to %s: %s"
msgstr "無法連線到 %s：%s"

#: gacopyz/server.c:1003
#, c-format
msgid "connecting to %s"
msgstr "正在連線到 %s"

#: gacopyz/server.c:1006
#, c-format
msgid "%s: already connected, disconnect first"
msgstr "%s：已連線，請先中斷連線"

#: gacopyz/server.c:1090
msgid "received invalid stage number"
msgstr "收到無效的階段號碼"

#: gacopyz/server.c:1100
msgid "invalid macro list"
msgstr "無效的巨集列表"

#: gacopyz/server.c:1104
#, c-format
msgid "macros for stage \"%s\" (%d): %s"
msgstr "階段 \"%s\" 的巨集（%d）：%s"

#: gacopyz/server.c:1124
#, c-format
msgid "%s: server not connected, cannot negotiate"
msgstr "%s：伺服器未連線，無法協商"

#: gacopyz/server.c:1130
#, c-format
msgid "%s: server already passed negotiation"
msgstr "%s：伺服器已通過協商"

#: gacopyz/server.c:1144
#, c-format
msgid "error reading reply to SMFIC_OPTNEG: %s"
msgstr "讀取對 SMFIC_OPTNEG 的回應時發生錯誤：%s"

#: gacopyz/server.c:1150
#, c-format
msgid "gacopyz_srv_negotiate: got %c instead of %c"
msgstr "gacopyz_srv_negotiate：收到 %c 而非 %c"

#: gacopyz/server.c:1157
msgid "gacopyz_srv_negotiate: not enough data returned"
msgstr "gacopyz_srv_negotiate：回傳的資料不足"

#: gacopyz/server.c:1169
#, c-format
msgid "client requested unsupported milter version: %#lx"
msgstr "用戶端要求了不支援的 milter 版本：%#lx"

#: gacopyz/server.c:1177
#, c-format
msgid "filter abilities %#lx do not match MTA milter abilities %#lx"
msgstr "篩選能力 %#lx 與 MTA milter 能力 %#lx 不符"

#: gacopyz/server.c:1186
#, c-format
msgid "protocol abilities %#lx do not match MTA milter abilities %#lx"
msgstr "協定能力 %#lx 與 MTA milter 能力 %#lx 不符"

#: gacopyz/server.c:1285
#, c-format
msgid "gacopyz_srv_send_command: size=%lu, cmd=%c"
msgstr "gacopyz_srv_send_command：大小=%lu，命令=%c"

#: gacopyz/server.c:1313
#, c-format
msgid "error reading reply to '%c': %s"
msgstr "讀取對 '%c' 的回應時發生錯誤：%s"

#: gacopyz/server.c:1463
#, c-format
msgid "%s: %s called with flags=%x"
msgstr "%s：%s 以 flags=%x 呼叫"

#: gacopyz/smfi.c:107
msgid "connection not initialized"
msgstr "連線未初始化"

#: lib/cache.c:112 lib/db.c:323
#, c-format
msgid "cannot remove record `%s' from `%s': %s"
msgstr "無法從 `%s' 移除記錄 `%s'：%s"

#: lib/cache.c:125 lib/db.c:157
#, c-format
msgid "cannot fetch record `%s' from `%s': %s"
msgstr "無法從 `%s' 擷取記錄 `%s'：%s"

#: lib/cache.c:166 lib/tbf_rate.c:184
#, c-format
msgid "cannot store datum `%s' into `%s': %s"
msgstr "無法將資料 `%s' 儲存至 `%s'：%s"

#: lib/db.c:115 lib/db.c:450
#, c-format
msgid "unable to create database %s: %s"
msgstr "無法建立資料庫 %s：%s"

#: lib/db.c:122 src/builtin/db.bi:192
#, c-format
msgid "%s fails safety check: %s"
msgstr "%s 未通過安全檢查：%s"

#: lib/db.c:130
#, c-format
msgid "mu_dbm_open(%s) failed: %s (%s)"
msgstr "mu_dbm_open(%s) 失敗：%s（%s）"

#: lib/db.c:191
#, c-format
msgid "cannot fetch data `%*.*s' from `%s': %s"
msgstr "無法擷取資料 `%*.*s'，從資料庫 `%s'：%s"

#: lib/db.c:200
#, c-format
msgid "unexpected error scanning database %s: %s"
msgstr "掃描資料庫 %s 時發生未預期的錯誤：%s"

#: lib/db.c:293
#, c-format
msgid "cannot remove record `%*.*s' from `%s': %s"
msgstr "無法移除記錄 `%*.*s'，從資料庫 `%s'：%s"

#: lib/db.c:377 mtasim/mtasim.c:773 src/builtin/sa.bi:252 src/calloutd.c:44
#: src/engine.c:78 src/mfdbtool.c:342 src/prog.c:70 src/prog.c:91
#: src/prog.c:106 src/prog.c:1699 src/prog.c:3065 src/prog.c:3072
msgid "not enough memory"
msgstr "記憶體不足"

#: lib/db.c:388 lib/rate.c:132
#, c-format
msgid "cannot insert datum `%s' into `%s': %s"
msgstr "無法將資料 `%s' 插入至 `%s'：%s"

#: lib/db.c:397
#, c-format
msgid "cannot insert datum `%*.*s' into `%s': %s"
msgstr "無法插入資料 `%*.*s` 到 `%s`：%s"

#: lib/db.c:458
#, c-format
msgid "unable to open database %s: %s"
msgstr "無法開啟資料庫 %s：%s"

#: lib/db.c:474
#, c-format
msgid "cannot rename %s to %s: %s"
msgstr "無法將 %s 重新命名為 %s：%s"

#: lib/dbcfg.c:47
msgid "positive-expire-interval is valid only for cache database"
msgstr "positive-expire-interval 僅對快取資料庫有效"

#: lib/dbcfg.c:68
msgid "negative-expire-interval is valid only for cache database"
msgstr "negative-expire-interval 僅對快取資料庫有效"

#: lib/dbcfg.c:86
msgid "Name of the database file"
msgstr "資料庫檔案名稱"

#: lib/dbcfg.c:87 lib/dns.c:1172
msgid "name: string"
msgstr "名稱：字串"

#: lib/dbcfg.c:89
msgid "Enable or disable the database"
msgstr "啟用或停用資料庫"

#: lib/dbcfg.c:92
msgid "Set database record expiration interval"
msgstr "設定資料庫記錄過期間隔"

#: lib/dbcfg.c:93 lib/dbcfg.c:97 lib/dbcfg.c:102 pmult/pmult.c:425
#: pmult/pmult.c:428 pmult/pmult.c:431 pmult/pmult.c:434
msgid "arg: interval"
msgstr "引數：間隔"

#: lib/dbcfg.c:96
msgid "Set positive expiration interval (for database \"cache\" only)"
msgstr "設定正面過期間隔（僅適用於資料庫 \"cache\"）"

#: lib/dbcfg.c:100
msgid "Set negative expiration interval (for database id \"cache\")"
msgstr "設定負面過期間隔（僅適用於資料庫 id \"cache\"）"

#: lib/dbcfg.c:121 src/mfdbtool.c:200
#, c-format
msgid "unknown database format: %s"
msgstr "未知的資料庫格式：%s"

#: lib/dbcfg.c:144
msgid "invalid file mode"
msgstr "無效的檔案模式"

#: lib/dbcfg.c:156
msgid "id"
msgstr "id"

#: lib/dbcfg.c:158
msgid "Define a database."
msgstr "定義一個資料庫。"

#: lib/dbcfg.c:169 src/mfdbtool.c:310 src/srvcfg.c:541
msgid "Configure file mode for database files"
msgstr "設定資料庫檔案的檔案模式"

#: lib/dbcfg.c:170 src/mfdbtool.c:311 src/srvcfg.c:542 pmult/pmult.c:712
msgid "mode: octal"
msgstr "模式：八進位"

#: lib/dns.c:120
#, c-format
msgid "%s too big"
msgstr "%s 太大"

#: lib/dns.c:1171
msgid "Read DNS configuration from this file (default: /etc/resolv.conf)"
msgstr "從此檔案讀取 DNS 組態（預設：/etc/resolv.conf）"

#: lib/dns.c:1175
msgid "Maximum allowed length of CNAME chains"
msgstr "CNAME 鏈的最大允許長度"

#: lib/dns.c:1188
msgid "DNS resolver configuration."
msgstr "DNS 解析器組態。"

#: lib/logger.c:68
#, c-format
msgid "cannot configure asynchronous syslog: %s; falling back to system one"
msgstr "無法設定非同步 syslog：%s；退回使用系統 syslog"

#: lib/rate.c:87 lib/tbf_rate.c:150
#, c-format
msgid "cannot fetch `%s' from `%s': %s"
msgstr "無法從 `%s` 擷取 `%s`：%s"

#: lib/server.c:51
#, c-format
msgid "cannot open pidfile `%s': %s"
msgstr "無法開啟 pid 檔案 `%s`：%s"

#: lib/server.c:56
#, c-format
msgid "cannot get pid from pidfile `%s'"
msgstr "無法從 pid 檔案 `%s` 取得 PID"

#: lib/server.c:59
#, c-format
msgid "%s appears to run with pid %lu. If it does not, remove `%s' and retry."
msgstr "%s 似乎以 PID %lu 執行中。若否，請移除 `%s` 並重試。"

#: lib/server.c:68
#, c-format
msgid "cannot unlink pidfile `%s': %s"
msgstr "無法刪除 pid 檔案 `%s`：%s"

#: lib/server.c:79
#, c-format
msgid "cannot create pidfile `%s': %s"
msgstr "無法建立 pid 檔案 `%s`：%s"

#: lib/server.c:147
msgid "when running as root, --user option is mandatory."
msgstr "以 root 執行時，--user 選項為必填。"

#: lib/server.c:152 lib/userprivs.c:328 mtasim/mtasim.c:127
#, c-format
msgid "no such user: %s"
msgstr "沒有這樣的使用者：%s"

#: lib/server.c:173
#, c-format
msgid "pipe: %s"
msgstr "pipe：%s"

#: lib/server.c:178 src/builtin/io.bi:700
#, c-format
msgid "fork: %s"
msgstr "fork：%s"

#: lib/server.c:191
#, c-format
msgid "cannot open input stream: %s"
msgstr "無法開啟輸入串流：%s"

#: lib/server.c:223
msgid "syntax check failed; restart cancelled"
msgstr "語法檢查失敗；取消重新啟動"

#: lib/server.c:238 src/mfdbtool.c:396
#, c-format
msgid "cannot change to %s: %s"
msgstr "無法切換至 %s：%s"

#: lib/server.c:250
msgid "program started without full file name"
msgstr "程式以非完整檔案名稱啟動"

#: lib/server.c:256
msgid "restart (SIGHUP) will not work"
msgstr "重新啟動（SIGHUP）將無法運作"

#: lib/server.c:264
#, c-format
msgid "cannot become a daemon: %s"
msgstr "無法成為常駐程式：%s"

#: lib/server.c:278
#, c-format
msgid "%s started"
msgstr "%s 已啟動"

#: lib/server.c:292
#, c-format
msgid "%s restarting"
msgstr "%s 正在重新啟動"

#: lib/server.c:301
#, c-format
msgid "cannot restart: %s"
msgstr "無法重新啟動：%s"

#: lib/server.c:303
#, c-format
msgid "command line was: %s"
msgstr "命令列為：%s"

#: lib/server.c:305
#, c-format
msgid "%s terminating"
msgstr "%s 正在終止"

#: lib/srvman.c:158
#, c-format
msgid "cannot get URL scheme: %s"
msgstr "無法取得 URL scheme：%s"

#: lib/srvman.c:172
#, c-format
msgid "cannot get URL path: %s"
msgstr "無法取得 URL 路徑：%s"

#: lib/srvman.c:179
#, c-format
msgid "socket path name too long: %s"
msgstr "socket 路徑名稱過長：%s"

#: lib/srvman.c:195 lib/srvman.c:248
#, c-format
msgid "cannot get URL port: %s"
msgstr "無法取得 URL 連接埠：%s"

#: lib/srvman.c:201 src/builtin/sa.bi:290
#, c-format
msgid "port out of range: %u"
msgstr "連接埠超出範圍：%u"

#: lib/srvman.c:206 lib/srvman.c:242
#, c-format
msgid "cannot get URL host: %s"
msgstr "無法取得 URL 主機：%s"

#: lib/srvman.c:213
#, c-format
msgid "unknown host name: %s"
msgstr "未知的主機名稱：%s"

#: lib/srvman.c:218
msgid "unsupported address family"
msgstr "不支援的位址家族"

#: lib/srvman.c:348
#, c-format
msgid "%s [%lu] failed with status %d"
msgstr "%s [%lu] 以狀態 %d 失敗"

#: lib/srvman.c:358
#, c-format
msgid "%s [%lu] terminated on signal %d"
msgstr "%s [%lu] 因訊號 %d 終止"

#: lib/srvman.c:362
#, c-format
msgid "%s [%lu] stopped on signal %d"
msgstr "%s [%lu] 因訊號 %d 停止"

#: lib/srvman.c:366
#, c-format
msgid "%s [%lu] terminated with unrecognized status"
msgstr "%s [%lu] 以無法辨識的狀態終止"

#: lib/srvman.c:545
#, c-format
msgid "server %s: access from %s blocked: cannot check ACLs: %s"
msgstr "伺服器 %s：已封鎖來自 %s 的存取：無法檢查 ACL：%s"

#: lib/srvman.c:552
#, c-format
msgid "server %s: undefined ACL result; access from %s allowed"
msgstr "伺服器 %s：ACL 結果未定義；允許來自 %s 的存取"

#: lib/srvman.c:563
#, c-format
msgid "server %s: access from %s blocked"
msgstr "伺服器 %s：已封鎖來自 %s 的存取"

#: lib/srvman.c:633
#, c-format
msgid "removing shut down server %s"
msgstr "正在移除已關閉的伺服器 %s"

#: lib/srvman.c:640
#, c-format
msgid "server %s: too many children (%lu)"
msgstr "伺服器 %s：子處理程序過多（%lu）"

#: lib/srvman.c:648
#, c-format
msgid "server %s: accept failed: %s"
msgstr "伺服器 %s：accept 失敗：%s"

#: lib/srvman.c:738
#, c-format
msgid "too many children (%lu)"
msgstr "子處理程序過多（%lu）"

#: lib/srvman.c:760
#, c-format
msgid "select failed: %s"
msgstr "select 失敗：%s"

#: lib/srvman.c:784
#, c-format
msgid "%s: file %s exists but cannot be stat'd: %s"
msgstr "%s：檔案 %s 存在但無法 stat：%s"

#: lib/srvman.c:791
#, c-format
msgid "%s: file %s is not a socket"
msgstr "%s：檔案 %s 不是 socket"

#: lib/srvman.c:797
#, c-format
msgid "%s: cannot unlink file %s: %s"
msgstr "%s：無法刪除檔案 %s：%s"

#: lib/srvman.c:803
#, c-format
msgid "socket `%s' already exists"
msgstr "socket `%s` 已存在"

#: lib/srvman.c:820
#, c-format
msgid "%s: cannot bind to %s: %s"
msgstr "伺服器 %s：無法綁定至 %s：%s"

#: lib/srvman.c:828
#, c-format
msgid "%s: listen on %s failed: %s"
msgstr "伺服器 %s：在 %s 上監聽失敗：%s"

#: lib/srvman.c:861
msgid "no servers configured"
msgstr "未設定任何伺服器"

#: lib/symtab.c:174
msgid "element not found in table"
msgstr "在表格中找不到元素"

#: lib/symtab.c:176
msgid "symbol table is full"
msgstr "符號表格已滿"

#: lib/tbf_rate.c:110 src/builtin/db.bi:228 src/builtin/db.bi:310
#: src/builtin/db.bi:354 src/builtin/db.bi:398 src/builtin/db.bi:482
#: src/builtin/db.bi:643 src/builtin/db.bi:769 src/builtin/db.bi:866
#, c-format
msgid "mf_dbm_open(%s) failed: %s"
msgstr "mf_dbm_open(%s) 失敗：%s"

#: lib/transform.c:290 lib/transform.c:380
msgid "invalid transform expression"
msgstr "無效的轉換運算式"

#: lib/transform.c:317
msgid "missing replacement expression"
msgstr "缺少替換運算式"

#: lib/transform.c:330
msgid "missing trailing delimiter"
msgstr "缺少尾部分隔符"

#: lib/transform.c:360
msgid "unknown flag"
msgstr "未知的旗標"

#: lib/transform.c:413
msgid "back reference out of range"
msgstr "反向參考超出範圍"

#: lib/userprivs.c:199
msgid "refusing to run as root"
msgstr "拒絕以 root 身份執行"

#: lib/userprivs.c:210
#, c-format
msgid "setgroups failed: %s"
msgstr "setgroups 失敗：%s"

#: lib/userprivs.c:221
#, c-format
msgid "setegid(%lu) failed: %s"
msgstr "setegid(%lu) 失敗：%s"

#: lib/userprivs.c:225
#, c-format
msgid "setregid(%lu,%lu) failed: %s"
msgstr "setregid(%lu,%lu) 失敗：%s"

#: lib/userprivs.c:230
#, c-format
msgid "setresgid(%lu,%lu,%lu) failed: %s"
msgstr "setresgid(%lu,%lu,%lu) 失敗：%s"

#: lib/userprivs.c:239
#, c-format
msgid "setgid(%lu) failed: %s"
msgstr "setgid(%lu) 失敗：%s"

#: lib/userprivs.c:242
#, c-format
msgid "cannot set effective gid to %lu"
msgstr "無法將 effective gid 設定為 %lu"

#: lib/userprivs.c:260
#, c-format
msgid "setreuid(%lu,-1) failed: %s"
msgstr "setreuid(%lu,-1) 失敗：%s"

#: lib/userprivs.c:266
#, c-format
msgid "second setuid(%lu) failed: %s"
msgstr "第二次 setuid(%lu) 失敗：%s"

#: lib/userprivs.c:274
#, c-format
msgid "setuid(%lu) failed: %s"
msgstr "setuid(%lu) 失敗：%s"

#: lib/userprivs.c:283
msgid "seteuid(0) succeeded when it should not"
msgstr "seteuid(0) 不應該成功但成功了"

#: lib/userprivs.c:286
msgid "cannot drop non-root setuid privileges"
msgstr "無法放棄非 root 的 setuid 權限"

#: lib/userprivs.c:302 mtasim/mtasim.c:332 src/srvcfg.c:146
#, c-format
msgid "unknown group: %s"
msgstr "未知的群組：%s"

#: lib/utils.c:95 src/main.c:750
msgid "unexpected list"
msgstr "未預期的清單"

#: lib/utils.c:99 src/main.c:754
#, c-format
msgid "INTERNAL ERROR at %s:%d: please report"
msgstr "內部錯誤於 %s:%d：請回報"

#: lib/utils.c:106 src/builtin/other.bi:69 src/drivers.c:1283 src/mfdbtool.c:85
#: src/mfdbtool.c:229
#, c-format
msgid "unrecognized time format (near `%s')"
msgstr "無法辨識的時間格式（接近 `%s`）"

#: lib/utils.c:120
#, c-format
msgid "this statement has no effect in %s"
msgstr "此陳述在 %s 中沒有作用"

#: lib/version.c:50 mfmod/mfmodnew.c:231
msgid "(C)"
msgstr "(C)"

#: lib/version.c:52 mfmod/mfmodnew.c:233
msgid ""
"\n"
"License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>\n"
"This is free software: you are free to change and redistribute it.\n"
"There is NO WARRANTY, to the extent permitted by law.\n"
"\n"
msgstr ""
"\n"
"授權條款 GPLv3+：GNU GPL 第三版或更新版本 <http://gnu.org/licenses/gpl.html>\n"
"這是自由軟體：您可以自由修改並重新散布它。\n"
"在法律允許的範圍內，不提供任何擔保。\n"
"\n"

#. TRANSLATORS: %s denotes an author name.
#: lib/version.c:61 mfmod/mfmodnew.c:242
#, c-format
msgid "Written by %s.\n"
msgstr "由 %s 撰寫。\n"

#: mtasim/mtasim.c:258
#, c-format
msgid "expected %s, but got %3.3s"
msgstr "預期為 %s，但得到 %3.3s"

#: mtasim/mtasim.c:276
#, c-format
msgid "expected \"%s\", but got %s"
msgstr "預期為 \"%s\"，但得到 %s"

#: mtasim/mtasim.c:293
msgid "mtasim -- MTA simulator for mailfromd"
msgstr "mtasim -- mailfromd 的 MTA 模擬器"

#: mtasim/mtasim.c:315
msgid "unsupported mode"
msgstr "不支援的模式"

#: mtasim/mtasim.c:342
#, c-format
msgid "wrong assignment format: %s"
msgstr "錯誤的賦值格式：%s"

#: mtasim/mtasim.c:387
#, c-format
msgid "invalid version syntax (near %s)"
msgstr "無效的版本語法（接近 %s）"

#: mtasim/mtasim.c:460
#, c-format
msgid "unknown timeout: %c"
msgstr "未知的逾時：%c"

#: mtasim/mtasim.c:465
#, c-format
msgid "missing '=' after %c"
msgstr "在 %c 之後缺少 '='"

#: mtasim/mtasim.c:481
#, c-format
msgid "unexpected character at %s"
msgstr "在 %s 處出現未預期的字元"

#: mtasim/mtasim.c:488
#, c-format
msgid "invalid timeout near %s"
msgstr "接近 %s 的無效逾時"

#: mtasim/mtasim.c:490
#, c-format
msgid "value out of range: %s"
msgstr "值超出範圍：%s"

#: mtasim/mtasim.c:661
#, c-format
msgid "error parsing --sender-sockaddr argument: %s"
msgstr "解析 --sender-sockaddr 引數時發生錯誤：%s"

#: mtasim/mtasim.c:677 src/main.c:532
#, c-format
msgid "%s: invalid log level"
msgstr "%s：無效的記錄層級"

#: mtasim/mtasim.c:684
msgid "Mode selection"
msgstr "模式選擇"

#: mtasim/mtasim.c:685
msgid "MODE"
msgstr "模式"

#: mtasim/mtasim.c:686
msgid "set MTA mode (-bd or -bs)"
msgstr "設定 MTA 模式（-bd 或 -bs）"

#: mtasim/mtasim.c:689
msgid "use the SMTP protocol on standard input and output (same as -bs)"
msgstr "在標準輸入和輸出上使用 SMTP 協定（等同於 -bs）"

#: mtasim/mtasim.c:692
msgid "run as daemon (same as -bd)"
msgstr "以常駐程式方式執行（與 -bd 相同）"

#: mtasim/mtasim.c:694 mtasim/mtasim.c:697 src/main.c:625 src/srvcfg.c:648
#: src/srvcfg.c:651
msgid "NAME"
msgstr "NAME"

#: mtasim/mtasim.c:695
msgid "run with this user privileges"
msgstr "以此使用者權限執行"

#: mtasim/mtasim.c:698 src/srvcfg.c:652
msgid "retain the supplementary group NAME when switching to user privileges"
msgstr "切換至使用者權限時保留補充群組 NAME"

#: mtasim/mtasim.c:702 src/main.c:547
msgid "Operation modifiers"
msgstr "操作修飾符"

#: mtasim/mtasim.c:703
msgid "MACRO=VALUE"
msgstr "MACRO=VALUE"

#: mtasim/mtasim.c:704
msgid "define Sendmail macro"
msgstr "定義 Sendmail 巨集"

#: mtasim/mtasim.c:706
msgid "PORT"
msgstr "PORT"

#: mtasim/mtasim.c:707
msgid "communicate with Milter PORT"
msgstr "與 Milter 連接埠 PORT 通訊"

#: mtasim/mtasim.c:710
msgid "pass temporary directory to mailfromd as its state dir (with -Xauto)"
msgstr "將暫存目錄傳遞給 mailfromd 作為其狀態目錄（搭配 -Xauto）"

#: mtasim/mtasim.c:712 src/mfdbtool.c:281
msgid "NUMBER"
msgstr "NUMBER"

#: mtasim/mtasim.c:713
msgid "set the body chunk for xxfi_body calls"
msgstr "設定 xxfi_body 呼叫的本體區塊大小"

#: mtasim/mtasim.c:715
msgid "VER"
msgstr "VER"

#: mtasim/mtasim.c:716
msgid "force using the given Milter protocol version number"
msgstr "強制使用指定的 Milter 協定版本號碼"

#: mtasim/mtasim.c:718 mtasim/mtasim.c:721
msgid "BITMASK"
msgstr "BITMASK"

#: mtasim/mtasim.c:719
msgid "force the given Milter actions"
msgstr "強制使用指定的 Milter 動作"

#: mtasim/mtasim.c:722
msgid "set Milter protocol capabilities"
msgstr "設定 Milter 協定能力"

#: mtasim/mtasim.c:724
msgid "F=V[,F=V...]"
msgstr "F=V[,F=V...]"

#: mtasim/mtasim.c:725
msgid "set milter timeouts"
msgstr "設定 milter 逾時值"

#: mtasim/mtasim.c:728
msgid "FAMILY[,HOSTNAME,ADDRESS[,PORT]]"
msgstr "FAMILY[,HOSTNAME,ADDRESS[,PORT]]"

#: mtasim/mtasim.c:729
msgid "set sender socket address"
msgstr "設定發送端插口位址"

#: mtasim/mtasim.c:733
msgid "interactive mode"
msgstr "互動模式"

#: mtasim/mtasim.c:736 src/main.c:589 src/main.c:593 src/srvcfg.c:685
#: pmult/pmult.c:831
msgid "STRING"
msgstr "STRING"

#: mtasim/mtasim.c:737
msgid "set readline prompt"
msgstr "設定 readline 提示字元"

#: mtasim/mtasim.c:740
msgid "Debugging and tracing"
msgstr "偵錯與追蹤"

#: mtasim/mtasim.c:742
msgid "append to the trace file"
msgstr "附加到追蹤檔案"

#: mtasim/mtasim.c:744 mtasim/mtasim.c:756 mtasim/mtasim.c:759
#: mtasim/mtasim.c:762 src/calloutd.c:80 src/main.c:573 src/main.c:605
#: src/main.c:608 src/main.c:611 src/mfdbtool.c:252 src/srvcfg.c:645
msgid "FILE"
msgstr "FILE"

#: mtasim/mtasim.c:745
msgid "set name of the trace file"
msgstr "設定追蹤檔案名稱"

#: mtasim/mtasim.c:748
msgid "increase verbosity level"
msgstr "提高詳細程度等級"

#: mtasim/mtasim.c:750 src/main.c:599 src/main.c:665 src/mfdbtool.c:273
#: src/srvcfg.c:666 pmult/pmult.c:834
msgid "LEVEL"
msgstr "LEVEL"

#: mtasim/mtasim.c:751 src/main.c:666
msgid "set Gacopyz log level"
msgstr "設定 Gacopyz 記錄等級"

#: mtasim/mtasim.c:755
msgid "TLS options"
msgstr "TLS 選項"

#: mtasim/mtasim.c:757
msgid "set name of the TLS certificate file"
msgstr "設定 TLS 憑證檔案名稱"

#: mtasim/mtasim.c:760
msgid "set name of the TLS CA file"
msgstr "設定 TLS CA 檔案名稱"

#: mtasim/mtasim.c:763
msgid "set name of the TLS key file"
msgstr "設定 TLS 金鑰檔案名稱"

#: mtasim/mtasim.c:820
#, c-format
msgid "cannot change to directory %s: %s"
msgstr "無法切換至目錄 %s：%s"

#: mtasim/mtasim.c:828
#, c-format
msgid "cannot open directory %s: %s"
msgstr "無法開啟目錄 %s：%s"

#: mtasim/mtasim.c:842 src/srvcfg.c:157 src/srvcfg.c:588
#, c-format
msgid "cannot stat file `%s': %s"
msgstr "無法取得檔案「%s」的狀態：%s"

#: mtasim/mtasim.c:849
#, c-format
msgid "cannot unlink %s: %s"
msgstr "無法刪除 %s：%s"

#: mtasim/mtasim.c:912
#, c-format
msgid "cannot save current directory: %s"
msgstr "無法儲存目前目錄：%s"

#: mtasim/mtasim.c:918
#, c-format
msgid "cannot restore current directory: %s"
msgstr "無法還原目前目錄：%s"

#: mtasim/mtasim.c:925
#, c-format
msgid "cannot remove directory %s: %s"
msgstr "無法移除目錄 %s：%s"

#: mtasim/mtasim.c:950
#, c-format
msgid "mailfromd exited with status %d"
msgstr "mailfromd 以狀態 %d 結束"

#: mtasim/mtasim.c:953
#, c-format
msgid "mailfromd terminated on signal %d"
msgstr "mailfromd 因訊號 %d 終止"

#: mtasim/mtasim.c:955
msgid "mailfromd terminated with unrecognized status"
msgstr "mailfromd 以無法辨識的狀態終止"

#: mtasim/mtasim.c:985
#, c-format
msgid "can't unlink %s: %s"
msgstr "無法刪除 %s：%s"

#: mtasim/mtasim.c:995
#, c-format
msgid "cannot fork: %s"
msgstr "無法 fork：%s"

#: mtasim/mtasim.c:1033
#, c-format
msgid "cannot execute mailfromd: %s"
msgstr "無法執行 mailfromd：%s"

#: mtasim/mtasim.c:1046
msgid "child process exited unexpectedly"
msgstr "子處理程序意外結束"

#: mtasim/mtasim.c:1096
#, c-format
msgid "cannot open trace output: %s"
msgstr "無法開啟追蹤輸出：%s"

#: mtasim/mtasim.c:1103
msgid "use either --stdio or --daemon"
msgstr "請使用 --stdio 或 --daemon"

#: mtasim/mtasim.c:1127
#, c-format
msgid "cannot create temporary directory (%s): %s"
msgstr "無法建立暫存目錄 (%s)：%s"

#: mtasim/mtasim.c:1147
msgid "cannot create gacopyz server"
msgstr "無法建立 gacopyz 伺服器"

#: mtasim/mtasim.c:1175
#, c-format
msgid "cannot connect to the milter using %s"
msgstr "無法使用 %s 連線至 milter"

#: mtasim/mtasim.c:1206
msgid "end of file reached"
msgstr "已達檔案結尾"

#: mtasim/mtasim.c:1424 mtasim/mtasim.c:1448
#, c-format
msgid "write failed: %s"
msgstr "寫入失敗：%s"

#: mtasim/mtasim.c:1480
#, c-format
msgid "read failed: %s"
msgstr "讀取失敗：%s"

#: mtasim/mtasim.c:1656 mtasim/mtasim.c:1774 mtasim/mtasim.c:1838
#, c-format
msgid "%s:%d: INTERNAL ERROR: no reply (%s)"
msgstr "%s:%d：內部錯誤：無回應 (%s)"

#: mtasim/openat-die.c:31
#, c-format
msgid "unable to record current working directory: %s"
msgstr "無法記錄目前工作目錄：%s"

#: mtasim/openat-die.c:39
#, c-format
msgid "failed to return to initial working directory: %s"
msgstr "無法返回初始工作目錄：%s"

#: src/builtin/builtin.c:52
#, c-format
msgid "no such module: %*.*s"
msgstr "沒有這樣的模組：%*.*s"

#: src/builtin/burst.bi:345
#, c-format
msgid "Cannot open temporary file: %s"
msgstr "無法開啟暫存檔案：%s"

#: src/builtin/burst.bi:358
#, c-format
msgid "error writing temporary stream: %s"
msgstr "寫入暫存串流時發生錯誤：%s"

#: src/builtin/burst.bi:529
msgid "message is not a RFC-934 digest"
msgstr "訊息不是 RFC-934 摘要"

#: src/builtin/burst.bi:540 src/builtin/mail.bi:311 src/builtin/mbox.bi:215
#: src/builtin/mfmod.bi:294 src/builtin/msg.bi:133 src/builtin/msg.bi:506
#: src/builtin/msg.bi:687
msgid "no more message slots available"
msgstr "沒有可用的訊息插槽"

#: src/builtin/curhdr.bi:80 src/builtin/curhdr.bi:111
#, c-format
msgid "requested item (#%ld) not found"
msgstr "找不到要求的項目 (#%ld)"

#: src/builtin/curhdr.bi:142
#, c-format
msgid "requested item (%s,%ld) not found"
msgstr "找不到要求的項目 (%s,%ld)"

#: src/builtin/db.bi:102
msgid "bad numeric file mode"
msgstr "錯誤的數值檔案模式"

#: src/builtin/db.bi:108
#, c-format
msgid "not a valid URL: %s"
msgstr "不是有效的 URL：%s"

#: src/builtin/db.bi:113
#, c-format
msgid "bad symbolic file mode (near %s)"
msgstr "錯誤的符號檔案模式（靠近 %s）"

#: src/builtin/db.bi:122
#, c-format
msgid "cannot create list: %s"
msgstr "無法建立清單：%s"

#: src/builtin/db.bi:134
#, c-format
msgid "Cannot create list: %s"
msgstr "無法建立清單：%s"

#: src/builtin/db.bi:180
#, c-format
msgid "cannot create database URL for %s: %s"
msgstr "無法為 %s 建立資料庫 URL：%s"

#: src/builtin/db.bi:242
#, c-format
msgid "cannot fetch data: %s"
msgstr "無法擷取資料：%s"

#: src/builtin/db.bi:328 src/builtin/db.bi:376
#, c-format
msgid "failed to insert data to %s: %s %s: %s"
msgstr "無法插入資料至 %s：%s %s：%s"

#: src/builtin/db.bi:372
msgid "record already exists"
msgstr "記錄已存在"

#: src/builtin/db.bi:410
#, c-format
msgid "failed to delete data `%s' from `%s': %s"
msgstr "無法從「%s」刪除資料「%s」：%s"

#: src/builtin/db.bi:494
#, c-format
msgid "mf_dbm_firstkey failed: %s"
msgstr "mf_dbm_firstkey 失敗：%s"

#: src/builtin/db.bi:501
msgid "no more database entries available"
msgstr "沒有可用的資料庫條目"

#: src/builtin/db.bi:517 src/builtin/db.bi:540 src/builtin/db.bi:557
#: src/builtin/db.bi:581
msgid "invalid database descriptor"
msgstr "無效的資料庫描述符"

#: src/builtin/db.bi:524
#, c-format
msgid "mu_dbm_nextkey: %s"
msgstr "mu_dbm_nextkey：%s"

#: src/builtin/db.bi:563
#, c-format
msgid "cannot fetch key: %s"
msgstr "無法擷取索引鍵：%s"

#. TRANSLATORS: Do not translate keywords:
#. traditional, gray, ct, con-tassios
#: src/builtin/db.bi:606
msgid "unknown semantics; allowed values are: traditional (or gray) and ct (or con-tassios)"
msgstr "未知的語意；允許值為：traditional（或 gray）與 ct（或 con-tassios）"

#: src/builtin/db.bi:658 src/builtin/db.bi:784 src/builtin/db.bi:881
#, c-format
msgid "greylist database %s has wrong data size"
msgstr "灰名單資料庫 %s 的資料大小錯誤"

#: src/builtin/db.bi:692
#, c-format
msgid "cannot insert datum `%-.*s' in greylist database %s: %s"
msgstr "無法插入資料 `%-.*s' 到灰名單資料庫 %s：%s"

#: src/builtin/db.bi:718 src/builtin/db.bi:808 src/builtin/db.bi:836
#, c-format
msgid "Cannot insert datum `%-.*s' in greylist database %s: %s"
msgstr "無法插入資料 `%-.*s' 到灰名單資料庫 %s：%s"

#: src/builtin/db.bi:742
#, c-format
msgid "is_greylisted is not implemented for traditional greylist databases; see documentation, chapter %s %s for more info"
msgstr "傳統灰名單資料庫未實作 is_greylisted；請參閱說明檔案第 %s 章 %s 以取得更多資訊"

#: src/builtin/db.bi:937 src/builtin/db.bi:947 src/builtin/db.bi:957
#: src/builtin/db.bi:967
#, c-format
msgid "no such db format: %s"
msgstr "沒有這樣的資料庫格式：%s"

#: src/builtin/debug.bi:29
#, c-format
msgid "invalid module name: %s"
msgstr "無效的模組名稱：%s"

#: src/builtin/debug.bi:110 src/prog.c:789
msgid "out of stack space; increase #pragma stacksize"
msgstr "堆疊空間不足；請增加 #pragma stacksize"

#: src/builtin/dkim.bi:220
#, c-format
msgid "bad signing algorithm: %s"
msgstr "錯誤的簽署演算法：%s"

#: src/builtin/dkim.bi:231 src/builtin/dkim.bi:237
#, c-format
msgid "bad canonicalization type: %s"
msgstr "錯誤的標準化類型：%s"

#: src/builtin/dkim.bi:261
#, c-format
msgid "MMQ incompatible with dkim_sign: %s on %s, value %s"
msgstr "MMQ 與 dkim_sign 不相容：%s 於 %s，值 %s"

#: src/builtin/dkim.bi:267
#, c-format
msgid "%s failed on %s, value %s: %s"
msgstr "%s 於 %s 失敗，值 %s：%s"

#: src/builtin/dkim.bi:274
#, c-format
msgid "error: %s"
msgstr "錯誤：%s"

#: src/builtin/dkim.bi:286
#, c-format
msgid "Sendmail address header postprocessing failed: %s"
msgstr "Sendmail 位址標頭後處理失敗：%s"

#: src/builtin/dkim.bi:293
msgid "DKIM failed"
msgstr "DKIM 失敗"

#: src/builtin/dns.bi:37
#, c-format
msgid "cannot resolve IP %s"
msgstr "無法解析 IP %s"

#: src/builtin/dns.bi:73
#, c-format
msgid "cannot create reverse name from %s and %s"
msgstr "無法從 %s 與 %s 建立反向名稱"

#: src/builtin/dns.bi:77
#, c-format
msgid "domain %s is not suitable for PTR record %s"
msgstr "網域 %s 不適用於 PTR 記錄 %s"

#: src/builtin/dns.bi:82 src/builtin/dns.bi:99 src/builtin/dns.bi:268
#: src/builtin/dns.bi:289 src/builtin/dns.bi:298
#, c-format
msgid "cannot resolve host name %s"
msgstr "無法解析主機名稱 %s"

#: src/builtin/dns.bi:88
#, c-format
msgid "cannot reverse IP %s"
msgstr "無法反向解析 IP %s"

#: src/builtin/dns.bi:120 src/builtin/dns.bi:511
#, c-format
msgid "bad DNS reply type: %d"
msgstr "錯誤的 DNS 回應類型：%d"

#: src/builtin/dns.bi:133
msgid "invalid resolve family value"
msgstr "無效的解析家族值"

#: src/builtin/dns.bi:138
#, c-format
msgid "cannot resolve %s"
msgstr "無法解析 %s"

#: src/builtin/dns.bi:154
#, c-format
msgid "cannot get MX records for %s"
msgstr "無法取得 %s 的 MX 記錄"

#: src/builtin/dns.bi:259
#, c-format
msgid "cannot get MXs for %s"
msgstr "無法取得 %s 的 MX 記錄"

#: src/builtin/dns.bi:283
#, c-format
msgid "%s has no MX records"
msgstr "%s 沒有 MX 記錄"

#: src/builtin/dns.bi:323
#, c-format
msgid "failed to get PTR record for %s"
msgstr "無法取得 %s 的 PTR 記錄"

#: src/builtin/dns.bi:335
#, c-format
msgid "cannot get NS records for %s"
msgstr "無法取得 %s 的 NS 記錄"

#: src/builtin/dns.bi:480
#, c-format
msgid "invalid DNS reply number: %ld"
msgstr "無效的 DNS 回應編號：%ld"

#: src/builtin/dns.bi:484 src/builtin/dns.bi:497 src/builtin/dns.bi:522
#, c-format
msgid "no such reply: %ld"
msgstr "沒有這樣的回應：%ld"

#: src/builtin/dns.bi:500 src/builtin/dns.bi:525
#, c-format
msgid "index out of range: %ld"
msgstr "索引超出範圍：%ld"

#: src/builtin/dns.bi:528
msgid "can't use dns_reply_ip on non-IPv4 replies"
msgstr "無法在非 IPv4 回應上使用 dns_reply_ip"

#: src/builtin/dns.bi:566
msgid "DNS reply table full"
msgstr "DNS 回應表已滿"

#: src/builtin/dns.bi:603
#, c-format
msgid "unsupported type: %ld"
msgstr "不支援的型別：%ld"

#: src/builtin/dns.bi:611
#, c-format
msgid "cannot get %s records for %s"
msgstr "無法取得 %s 的 %s 記錄"

#: src/builtin/geoip2.bi:170 src/builtin/geoip2.bi:263
msgid "IP not found in the database"
msgstr "在資料庫中找不到 IP"

#: src/builtin/geoip2.bi:294
msgid "malformed data list"
msgstr "資料列表格式錯誤"

#: src/builtin/geoip2.bi:363
#, c-format
msgid "unsupported MMDB data type %d"
msgstr "不支援的 MMDB 資料型別 %d"

#: src/builtin/geoip2.bi:394
msgid "malformed data list: reported and actual number of keys differ"
msgstr "資料列表格式錯誤：金鑰的報告數量與實際數量不符"

#: src/builtin/getpw.bi:54
#, c-format
msgid "%s: user not found"
msgstr "%s：找不到使用者"

#: src/builtin/getpw.bi:73
#, c-format
msgid "%lu: uid not found"
msgstr "%lu：找不到 UID"

#: src/builtin/io.bi:30
msgid "Maximum number of stream descriptors."
msgstr "串流描述器最大數量。"

#: src/builtin/io.bi:70
#, c-format
msgid "%s: short write"
msgstr "%s：寫入短少"

#: src/builtin/io.bi:74
#, c-format
msgid "%s: write error: %s"
msgstr "%s：寫入錯誤：%s"

#: src/builtin/io.bi:145 src/builtin/io.bi:238 src/builtin/io.bi:254
#: src/builtin/io.bi:279 src/builtin/io.bi:1235 src/builtin/io.bi:1265
#: src/builtin/io.bi:1341 src/builtin/io.bi:1369 src/builtin/io.bi:1377
#, c-format
msgid "%s: error flushing stream"
msgstr "%s：排空串流時發生錯誤"

#: src/builtin/io.bi:158
msgid "buffer size out of allowed range"
msgstr "緩衝區大小超出允許範圍"

#: src/builtin/io.bi:163
msgid "can't allocate stream buffer"
msgstr "無法配置串流緩衝區"

#: src/builtin/io.bi:171
#, c-format
msgid "bad buffering type: %ld"
msgstr "錯誤的緩衝型別：%ld"

#: src/builtin/io.bi:202
#, c-format
msgid "write error on %s: %s"
msgstr "在 %s 上寫入錯誤：%s"

#: src/builtin/io.bi:224 src/builtin/io.bi:292
msgid "cannot reallocate stream buffer"
msgstr "無法重新配置串流緩衝區"

#: src/builtin/io.bi:305 src/builtin/io.bi:329 src/builtin/io.bi:355
#, c-format
msgid "read error on %s: %s"
msgstr "在 %s 上讀取錯誤：%s"

#: src/builtin/io.bi:379 src/builtin/io.bi:1325
#, c-format
msgid "EOF on %s"
msgstr "在 %s 上遇到 EOF"

#: src/builtin/io.bi:418
#, c-format
msgid "pipe failed: %s"
msgstr "pipe 失敗：%s"

#: src/builtin/io.bi:426
#, c-format
msgid "fork failed: %s"
msgstr "fork 失敗：%s"

#: src/builtin/io.bi:448
#, c-format
msgid "unknown syslog facility (%s), redirecting stderr to %s"
msgstr "未知的 syslog 設施（%s），將 stderr 重新導向至 %s"

#: src/builtin/io.bi:455
#, c-format
msgid "unknown syslog priority (%s), redirecting stderr to %s"
msgstr "未知的 syslog 優先權（%s），將 stderr 重新導向至 %s"

#: src/builtin/io.bi:518
#, c-format
msgid "cannot open file %s for appending: %s"
msgstr "無法開啟檔案 %s 以附加：%s"

#: src/builtin/io.bi:632
#, c-format
msgid "pipe left: %s"
msgstr "左管道：%s"

#: src/builtin/io.bi:639
#, c-format
msgid "pipe right: %s"
msgstr "右管道：%s"

#: src/builtin/io.bi:677
#, c-format
msgid "cannot parse command line %s: %s"
msgstr "無法解析命令列 %s：%s"

#: src/builtin/io.bi:691
#, c-format
msgid "cannot run %s: %s"
msgstr "無法執行 %s：%s"

#: src/builtin/io.bi:737 src/dkim.c:1744 src/dkim.c:1786
#, c-format
msgid "can't open %s: %s"
msgstr "無法開啟 %s：%s"

#: src/builtin/io.bi:955
#, c-format
msgid "can't parse connection string %s"
msgstr "無法解析連線字串 %s"

#: src/builtin/io.bi:1019 src/builtin/io.bi:1032 src/builtin/io.bi:1254
msgid "invalid file descriptor"
msgstr "無效的檔案描述器"

#: src/builtin/io.bi:1088 src/builtin/io.bi:1141 src/builtin/io.bi:1196
msgid "no more files available"
msgstr "沒有更多檔案可用"

#: src/builtin/ipaddr.bi:57
#, c-format
msgid "invalid IP address (%s)"
msgstr "無效的 IP 位址（%s）"

#: src/builtin/ipaddr.bi:78
#, c-format
msgid "invalid netmask: %lu"
msgstr "無效的網路遮罩：%lu"

#: src/builtin/ipaddr.bi:108
#, c-format
msgid "invalid IP address: %s"
msgstr "無效的 IP 位址：%s"

#: src/builtin/ipaddr.bi:138 src/builtin/ipaddr.bi:141
#, c-format
msgid "not a valid IP or CIDR: %s"
msgstr "不是有效的 IP 或 CIDR：%s"

#: src/builtin/macro.bi:27 src/gram.y:1084 src/main.c:295
#, c-format
msgid "unknown smtp state tag: %s"
msgstr "未知的 SMTP 狀態標籤：%s"

#: src/builtin/macro.bi:38 src/prog.c:1286
#, c-format
msgid "macro not defined: %s"
msgstr "巨集未定義：%s"

#: src/builtin/mail.bi:37
#, c-format
msgid "cannot create mailer `%s': %s"
msgstr "無法建立郵件程式 `%s'：%s"

#: src/builtin/mail.bi:47
#, c-format
msgid "bad recipient address `%s': %s"
msgstr "無效的收件者位址 `%s'：%s"

#: src/builtin/mail.bi:60
#, c-format
msgid "bad sender address `%s': %s"
msgstr "無效的寄件者位址 `%s'：%s"

#: src/builtin/mail.bi:72
#, c-format
msgid "opening mailer `%s' failed: %s"
msgstr "開啟郵件程式 `%s' 失敗：%s"

#: src/builtin/mail.bi:82
#, c-format
msgid "cannot send message: %s"
msgstr "無法傳送訊息：%s"

#: src/builtin/mail.bi:302 src/builtin/mail.bi:330
#, c-format
msgid "cannot create DSN: %s"
msgstr "無法建立 DSN：%s"

#: src/builtin/mbox.bi:26
msgid "Maximum number of mailboxes to open simultaneously."
msgstr "同時開啟的信箱最大數量。"

#: src/builtin/mbox.bi:91
msgid "no more mailboxes available"
msgstr "沒有更多信箱可用"

#: src/builtin/mbox.bi:120 src/builtin/mbox.bi:126
#, c-format
msgid "incorrect mode near `%s'"
msgstr "在 `%s' 附近模式不正確"

#: src/builtin/mbox.bi:137
#, c-format
msgid "invalid permissions (near %s)"
msgstr "無效的權限（在 %s 附近）"

#: src/builtin/mbox.bi:144
#, c-format
msgid "cannot create mailbox `%s': %s"
msgstr "無法建立信箱 `%s'：%s"

#: src/builtin/mbox.bi:150
#, c-format
msgid "cannot open mailbox `%s': %s"
msgstr "無法開啟信箱 `%s'：%s"

#: src/builtin/mbox.bi:166 src/builtin/mbox.bi:177
msgid "invalid mailbox descriptor"
msgstr "無效的信箱描述器"

#: src/builtin/mbox.bi:181
msgid "mailbox not open"
msgstr "信箱未開啟"

#: src/builtin/mbox.bi:231
#, c-format
msgid "cannot append message: %s"
msgstr "無法附加訊息：%s"

#: src/builtin/mfmod.bi:31
msgid "Maximum number of dynamically loaded modules."
msgstr "動態載入模組最大數量。"

#: src/builtin/mfmod.bi:33
msgid "Search path for dynamically loaded modules."
msgstr "動態載入模組的搜尋路徑。"

#: src/builtin/mfmod.bi:148
msgid "no more library slots available"
msgstr "沒有更多函式庫插槽可用"

#: src/builtin/mfmod.bi:152
#, c-format
msgid "module file %s not found in mfmod_path"
msgstr "在 mfmod_path 中找不到模組檔案 %s"

#: src/builtin/mfmod.bi:156
#, c-format
msgid "can't load %s: %s"
msgstr "無法載入 %s：%s"

#: src/builtin/mfmod.bi:190
msgid "invalid dynamic library handle"
msgstr "無效的動態函式庫控制代碼"

#: src/builtin/mfmod.bi:198
#, c-format
msgid "can't find symbol %s in %s: %s"
msgstr "在 %s 中找不到符號 %s：%s"

#: src/builtin/mfmod.bi:201
#, c-format
msgid "%s in module %s has NULL value"
msgstr "模組 %s 中的 %s 值為 NULL"

#: src/builtin/mfmod.bi:223
msgid "number of arguments doesn't satisfy type string"
msgstr "引數數量不符合型別字串"

#: src/builtin/mfmod.bi:265 src/builtin/mfmod.bi:275
#, c-format
msgid "call to %s in module %s failed"
msgstr "呼叫模組 %s 中的 %s 失敗"

#: src/builtin/mfmod.bi:271
#, c-format
msgid "call to %s in module %s failed: %s"
msgstr "呼叫模組 %s 中的 %s 失敗：%s"

#: src/builtin/mfmod.bi:301
#, c-format
msgid "unsupported return type %d in call to %s, module %s failed"
msgstr "不支援的回傳型別 %d，在呼叫 %s 中（模組 %s 失敗）"

#: src/builtin/msg.bi:26
msgid "Maximum number of messages to open simultaneously."
msgstr "同時開啟的訊息最大數量。"

#: src/builtin/msg.bi:127
#, c-format
msgid "cannot obtain capture stream reference: %s"
msgstr "無法取得擷取串流參考：%s"

#: src/builtin/msg.bi:147
msgid "invalid message descriptor"
msgstr "無效的訊息描述器"

#: src/builtin/msg.bi:151
msgid "message not open"
msgstr "訊息未開啟"

#: src/builtin/msg.bi:222
msgid "message size out of representable range"
msgstr "訊息大小超出可表示範圍"

#: src/builtin/msg.bi:256
msgid "body size out of representable range"
msgstr "正文大小超出可表示範圍"

#: src/builtin/msg.bi:291
#, c-format
msgid "can't create filter for encoding %s: %s"
msgstr "無法為編碼 %s 建立篩選器：%s"

#: src/builtin/msg.bi:344
msgid "header size out of representable range"
msgstr "標頭大小超出可表示範圍"

#: src/builtin/msg.bi:419
msgid "header not found"
msgstr "找不到標頭"

#: src/builtin/msg.bi:544 src/builtin/msg.bi:579
msgid "end of input"
msgstr "輸入結束"

#: src/builtin/msg.bi:877
#, c-format
msgid "can't convert from charset %s to %s: %s"
msgstr "無法從字元集 %s 轉換至 %s：%s"

#: src/builtin/other.bi:40
#, c-format
msgid "temporary failure querying for username %s"
msgstr "暫時性查詢使用者名稱 %s 失敗"

#: src/builtin/other.bi:46
#, c-format
msgid "failure querying for username %s"
msgstr "查詢使用者名稱 %s 失敗"

#: src/builtin/other.bi:79
#, c-format
msgid "unrecongized state id %ld"
msgstr "無法辨識的狀態 ID %ld"

#: src/builtin/other.bi:95
#, c-format
msgid "unrecognized action code %ld"
msgstr "無法辨識的動作碼 %ld"

#: src/builtin/prereq.bi:27
msgid "invalid version syntax"
msgstr "無效的版本語法"

#: src/builtin/prereq.bi:29
#, c-format
msgid "this source file requires %s version %s or later,"
msgstr "此來源檔案需要 %s 版本 %s 或更新版本，"

#: src/builtin/prereq.bi:31
#, c-format
msgid "but you use version %s"
msgstr "但您使用的是版本 %s"

#: src/builtin/prereq.bi:41
#, c-format
msgid "not a valid version number: %s (argument %d)"
msgstr "無效的版本號碼：%s（引數 %d）"

#: src/builtin/rate.bi:28
#, c-format
msgid "cannot get rate for %s"
msgstr "無法取得 %s 的速率"

#: src/builtin/rate.bi:42
#, c-format
msgid "cannot check TBF rate for %s"
msgstr "無法檢查 %s 的 TBF 速率"

#: src/builtin/sa.bi:48
#, c-format
msgid "cannot create debug stream; transcript disabled: %s"
msgstr "無法建立偵錯串流；轉錄已停用：%s"

#: src/builtin/sa.bi:55
#, c-format
msgid "cannot create transcript stream: %s"
msgstr "無法建立轉錄串流：%s"

#: src/builtin/sa.bi:260 src/srvcfg.c:95
#, c-format
msgid "cannot create URL from `%s': %s"
msgstr "無法從 `%s' 建立 URL：%s"

#: src/builtin/sa.bi:266
#, c-format
msgid "%s: cannot get scheme: %s"
msgstr "%s：無法取得 scheme：%s"

#: src/builtin/sa.bi:274
#, c-format
msgid "%s: cannot get path: %s"
msgstr "%s：無法取得路徑：%s"

#: src/builtin/sa.bi:283
#, c-format
msgid "%s: cannot get port: %s"
msgstr "%s：無法取得連接埠：%s"

#: src/builtin/sa.bi:297
#, c-format
msgid "%s: cannot get host: %s"
msgstr "%s：無法取得主機：%s"

#: src/builtin/sa.bi:302
#, c-format
msgid "invalid URL: %s"
msgstr "無效的 URL：%s"

#: src/builtin/sa.bi:376
#, c-format
msgid "unknown command: %ld"
msgstr "未知的命令：%ld"

#: src/builtin/sa.bi:405
#, c-format
msgid "send stream failed: %s"
msgstr "傳送串流失敗：%s"

#: src/builtin/sa.bi:414
msgid "remote side has closed connection"
msgstr "遠端已關閉連線"

#: src/builtin/sa.bi:419
#, c-format
msgid "spamd responded with bad string '%s'"
msgstr "spamd 以無效字串 '%s' 回應"

#: src/builtin/sa.bi:425
#, c-format
msgid "unsupported SPAMD version: %s"
msgstr "不支援的 SPAMD 版本：%s"

#: src/builtin/sa.bi:438
#, c-format
msgid "spamd responded with bad Spam header '%s'"
msgstr "spamd 以無效 Spam 標頭 '%s' 回應"

#: src/builtin/sa.bi:533
#, c-format
msgid "bad response from clamav: expected `PORT' but found `%s'"
msgstr "來自 clamav 的無效回應：預期為 `PORT' 但找到 `%s'"

#: src/builtin/sa.bi:552
#, c-format
msgid "sending to stream failed: %s"
msgstr "傳送至串流失敗：%s"

#: src/builtin/sa.bi:557
#, c-format
msgid "error reading clamav response: %s"
msgstr "讀取 clamav 回應時發生錯誤：%s"

#: src/builtin/sa.bi:562 src/builtin/sa.bi:586
#, c-format
msgid "unknown clamav response: %s"
msgstr "未知的 clamav 回應：%s"

#: src/builtin/sa.bi:583
#, c-format
msgid "clamav error: %s"
msgstr "clamav 錯誤：%s"

#: src/builtin/sieve.bi:63
msgid "sieve called from here"
msgstr "從這裡呼叫 sieve"

#: src/builtin/sieve.bi:95
#, c-format
msgid "failed to initialize sieve machine: %s"
msgstr "初始化 sieve 機器失敗：%s"

#: src/builtin/sieve.bi:134
#, c-format
msgid "compilation of Sieve script %s failed"
msgstr "編譯 Sieve 指令稿 %s 失敗"

#: src/builtin/sieve.bi:144
#, c-format
msgid "sieving failed: %s"
msgstr "sieve 篩選失敗：%s"

#: src/builtin/string.bi:60
msgid "argument out of range"
msgstr "引數超出範圍"

#: src/builtin/string.bi:75 src/builtin/string.bi:96 src/builtin/string.bi:118
#, c-format
msgid "argument out of range: start=%ld"
msgstr "引數超出範圍：start=%ld"

#: src/builtin/string.bi:79
#, c-format
msgid "argument out of range: start=%ld, len=%ld"
msgstr "引數超出範圍：start=%ld，len=%ld"

#: src/builtin/string.bi:162
#, c-format
msgid "argument out of range: count=%ld"
msgstr "引數超出範圍：count=%ld"

#: src/builtin/string.bi:181
#, c-format
msgid "error decoding string: %s"
msgstr "解碼字串時發生錯誤：%s"

#: src/builtin/string.bi:197
#, c-format
msgid "error encoding string: %s"
msgstr "編碼字串時發生錯誤：%s"

#: src/builtin/tr.bi:72
#, c-format
msgid "unfinished character class near %s"
msgstr "未完成的字元類別靠近 %s"

#: src/builtin/tr.bi:79
#, c-format
msgid "unclosed character class near %s"
msgstr "未關閉的字元類別靠近 %s"

#: src/builtin/tr.bi:83
#, c-format
msgid "unrecognized character class %*.*s"
msgstr "無法辨識的字元類別 %*.*s"

#: src/builtin/tr.bi:93
#, c-format
msgid "descending range in character class near %s"
msgstr "字元類別中靠近 %s 的降序範圍"

#: src/builtin/tr.bi:181
msgid "replacement set cannot be empty"
msgstr "替換集合不可為空"

#: src/builtin/tr.bi:194
msgid "ranges in source set must be in ascending order"
msgstr "來源集合中的範圍必須為升序"

#: src/builtin/tr.bi:199
msgid "ranges should appear at the same offset in both source and replacement sets"
msgstr "範圍應出現在來源和替換集合中的相同偏移量"

#: src/builtin/tr.bi:206
msgid "source and replacement ranges differ in size"
msgstr "來源和替換範圍大小不同"

#: src/optab.opc:45 optab.opc:45
#, c-format
msgid "%08lx: unknown opcode %u; aborting dump"
msgstr "%08lx：未知的運算碼 %u；正在中止傾印"

#: src/callout.c:206
#, c-format
msgid "%s: stream_write: wrote 0 bytes"
msgstr "%s：stream_write：寫入 0 位元組"

#: src/callout.c:215 src/callout.c:282
#, c-format
msgid "%s: smtp_wait failed: %s"
msgstr "%s：smtp_wait 失敗：%s"

#: src/callout.c:275
#, c-format
msgid "%s: stream_read: read 0 bytes"
msgstr "%s：stream_read：讀取 0 位元組"

#: src/callout.c:333
#, c-format
msgid "%s: unexpected reply from server: %s"
msgstr "%s：來自伺服器的未預期回應：%s"

#: src/callout.c:340
#, c-format
msgid "%s: unexpected reply code from server: %d"
msgstr "%s：來自伺服器的未預期回應碼：%d"

#: src/callout.c:508 src/callout.c:580
#, c-format
msgid "STARTTLS failed (%s)"
msgstr "STARTTLS 失敗（%s）"

#: src/callout.c:517
msgid "restarting session"
msgstr "正在重新啟動工作階段"

#: src/callout.c:614
#, c-format
msgid "cannot create debug stream: %s; transcript disabled"
msgstr "無法建立偵錯串流：%s；轉錄已停用"

#: src/callout.c:633
#, c-format
msgid "cannot create transcript filterstream: %s"
msgstr "無法建立轉錄篩選串流：%s"

#: src/callout.c:638
#, c-format
msgid "cannot create transcript stream: %s; transcript disabled"
msgstr "無法建立轉錄串流：%s；轉錄已停用"

#: src/callout.c:664 src/srvcfg.c:187
#, c-format
msgid "cannot convert %s to sockaddr: %s"
msgstr "無法將 %s 轉換為 sockaddr：%s"

#: src/callout.c:674
#, c-format
msgid "%s: cannot connect to `%s': %s"
msgstr "%s：無法連線到 `%s'：%s"

#: src/callout.c:768
#, c-format
msgid "%s: cannot create address `%s': %s"
msgstr "%s：無法建立位址 `%s'：%s"

#: src/callout.c:863
#, c-format
msgid "%s: invalid address: %s"
msgstr "%s：無效的位址：%s"

#: src/calloutd.c:49
msgid "calloutd -- a call out server"
msgstr "calloutd -- 呼叫伺服器"

#: src/calloutd.c:79 src/main.c:580
msgid "General options"
msgstr "一般選項"

#: src/calloutd.c:81 src/main.c:609
msgid "read resolver configuration from FILE"
msgstr "從 FILE 讀取解析器組態"

#: src/dkim.c:62
#, c-format
msgid "can't read private key from %s: %s"
msgstr "無法從 %s 讀取私密金鑰：%s"

#: src/dkim.c:67
#, c-format
msgid "error parsing file %s"
msgstr "解析檔案 %s 時發生錯誤"

#: src/dkim.c:71
#, c-format
msgid "unexpected end of file in %s"
msgstr "在 %s 中未預期的檔案結尾"

#: src/dkim.c:75
#, c-format
msgid "unsupported RSA version in file %s"
msgstr "檔案 %s 中不支援的 RSA 版本"

#: src/dkim.c:79
#, c-format
msgid "INTERNAL ERROR: unrecognized PEM error code: %d"
msgstr "內部錯誤：無法辨識的 PEM 錯誤碼：%d"

#: src/dkim.c:710
msgid "unexpected end of file in canonical stream"
msgstr "規範串流中未預期的檔案結尾"

#: src/dkim.c:1622
msgid "malformed canonical stream"
msgstr "規範串流格式錯誤"

#: src/drivers.c:274 src/drivers.c:283 src/drivers.c:439 src/drivers.c:449
msgid "division by zero"
msgstr "除以零"

#: src/drivers.c:317
msgid "left-hand side argument to the arithmetical operation is of wrong data type"
msgstr "算術運算的左側引數資料型別錯誤"

#: src/drivers.c:322
msgid "right-hand side argument to the arithmetical operation is of wrong data type"
msgstr "算術運算的右側引數資料型別錯誤"

#: src/drivers.c:666
#, c-format
msgid "cannot compile regex: %s"
msgstr "無法編譯常規表達式：%s"

#: src/drivers.c:713
msgid "left-hand side argument to match is of wrong data type"
msgstr "match 的左側引數資料型別錯誤"

#: src/drivers.c:727
msgid "right-hand side argument to match is of wrong data type (should not happen)"
msgstr "match 的右側引數資料型別錯誤（不應發生）"

#: src/drivers.c:745
msgid "left-hand side argument to fnmatch is of wrong data type"
msgstr "fnmatch 的左側引數資料型別錯誤"

#: src/drivers.c:749
msgid "right-hand side argument to fnmatch is of wrong data type"
msgstr "fnmatch 的右側引數資料型別錯誤"

#: src/drivers.c:768
msgid "invalid argument type in binary operation"
msgstr "二進位運算中的無效引數型別"

#: src/drivers.c:1095
msgid "reject code should be 5xx"
msgstr "reject 碼應為 5xx"

#: src/drivers.c:1099
msgid "reject extended code should be 5.x.x"
msgstr "reject 延伸碼應為 5.x.x"

#: src/drivers.c:1106
msgid "tempfail code should be 4xx"
msgstr "tempfail 碼應為 4xx"

#: src/drivers.c:1110
msgid "tempfail extended code should be 4.x.x"
msgstr "tempfail 延伸碼應為 4.x.x"

#: src/drivers.c:2342 src/drivers.c:2396
#, c-format
msgid "cannot convert %s to number"
msgstr "無法將 %s 轉換為數字"

#: src/drivers.c:2636 src/drivers.c:2668
#, c-format
msgid "INTERNAL ERROR at %s:%d: cannot find loop"
msgstr "內部錯誤於 %s：%d：找不到迴圈"

#: src/drivers.c:2862
msgid "cannot convert literal to number"
msgstr "無法將常值轉換為數字"

#: src/drivers.c:2882
msgid "expression evaluates to unspecified data type"
msgstr "運算式計算為未指定的資料型別"

#: src/drivers.c:3057 src/symbols.c:114
#, c-format
msgid "invalid transform string: %s"
msgstr "無效的轉換字串：%s"

#: src/engine.c:237
msgid "execution of the filter program was not finished"
msgstr "篩選程式的執行未完成"

#: src/engine.c:312
#, c-format
msgid "mlfi_connect: unsupported address family: %d"
msgstr "mlfi_connect：不支援的位址家族：%d"

#: src/engine.c:496 pmult/pmult.c:149
#, c-format
msgid "cannot create opool: %s"
msgstr "無法建立 opool：%s"

#: src/engine.c:513
#, c-format
msgid "failed to append to opool: %s"
msgstr "附加至 opool 失敗：%s"

#: src/engine.c:526 src/engine.c:542 src/engine.c:601 pmult/pmult.c:2179
#, c-format
msgid "%s failed: %s"
msgstr "%s 失敗：%s"

#: src/gram.y:220
#, c-format
msgid "function `%s' cannot be used in prog `%s'"
msgstr "函式 `%s' 無法用於 prog `%s'"

#: src/gram.y:246
#, c-format
msgid "built-in function `%s' cannot be used in prog `%s'"
msgstr "內建函式 `%s' 無法用於 prog `%s'"

#: src/gram.y:555
msgid "missing module declaration"
msgstr "缺少模組宣告"

#: src/gram.y:567 src/gram.y:578
msgid "duplicate module declaration"
msgstr "模組宣告重複"

#: src/gram.y:582
msgid "invalid module declaration"
msgstr "無效的模組宣告"

#: src/gram.y:650
msgid "`precious' used with func"
msgstr "`precious' 與 func 一起使用"

#: src/gram.y:654 src/gram.y:692 src/gram.y:707 src/gram.y:817
msgid "`static' and `public' used together"
msgstr "`static' 和 `public' 一起使用"

#: src/gram.y:770
#, c-format
msgid "duplicate `%s'"
msgstr "重複的 `%s'"

#: src/gram.y:813
msgid "`precious' used with const"
msgstr "`precious' 與 const 一起使用"

#: src/gram.y:832 src/gram.y:870
#, c-format
msgid "constant name `%s' clashes with a variable name"
msgstr "常數名稱 `%s' 與變數名稱衝突"

#: src/gram.y:835 src/gram.y:873 src/gram.y:4044 src/gram.y:4057
#: src/gram.y:4082
msgid "this is the location of the previous definition"
msgstr "這是先前定義的位置"

#: src/gram.y:854
msgid "initializer element is not constant"
msgstr "初始化元素不是常數"

#: src/gram.y:909
msgid "initializer element is not numeric"
msgstr "初始化元素不是數值"

#: src/gram.y:1120
#, c-format
msgid "return from %s is ignored"
msgstr "來自 %s 的回傳被忽略"

#: src/gram.y:1147 src/gram.y:1872 src/gram.y:3793
msgid "unspecified value not ignored as it should be"
msgstr "未指定的值未應忽略而未忽略"

#: src/gram.y:1187
msgid "Sendmail action is not allowed in begin block"
msgstr "begin 區塊中不允許 Sendmail 動作"

#: src/gram.y:1191
msgid "Sendmail action is not allowed in end block"
msgstr "end 區塊中不允許 Sendmail 動作"

#: src/gram.y:1200
msgid "header action is not allowed in end block"
msgstr "end 區塊中不允許標頭動作"

#: src/gram.y:1218
msgid "arguments are ignored for accept"
msgstr "accept 的引數被忽略"

#: src/gram.y:1346
msgid "invalid SMTP reply code"
msgstr "無效的 SMTP 回應碼"

#: src/gram.y:1368
msgid "invalid extended reply code"
msgstr "無效的延伸回應碼"

#: src/gram.y:1428
msgid "duplicate default statement"
msgstr "default 陳述式重複"

#: src/gram.y:1430 src/symbols.c:831 src/symbols.c:837
msgid "previously defined here"
msgstr "先前定義於此"

#: src/gram.y:1517
#, c-format
msgid "expected string, but found %s"
msgstr "預期為字串，但找到 %s"

#: src/gram.y:1606
msgid "duplicate loop increment"
msgstr "迴圈增量重複"

#: src/gram.y:1613
msgid "duplicate for statement"
msgstr "for 陳述式重複"

#: src/gram.y:1620
msgid "duplicate while statement"
msgstr "while 陳述式重複"

#: src/gram.y:1662 src/gram.y:1676
#, c-format
msgid "no such loop: %s"
msgstr "沒有此迴圈：%s"

#: src/gram.y:1665
msgid "`break' used outside of `loop'"
msgstr "`break' 在 `loop' 外部使用"

#: src/gram.y:1679
msgid "`next' used outside `loop'"
msgstr "`next' 在 `loop' 外部使用"

#: src/gram.y:1683
msgid "`next' is used outside `loop'; did you mean `pass'?"
msgstr "`next' 在 `loop' 外部使用；您是指 `pass' 嗎？"

#: src/gram.y:1969
msgid "$(expr) is allowed only in a function with variable number of arguments"
msgstr "$(expr) 僅可用於具有可變數量引數的函式"

#: src/gram.y:1999 src/gram.y:2024 src/gram.y:2039 src/gram.y:3810
#, c-format
msgid "too few arguments in call to `%s'"
msgstr "呼叫 `%s' 時引數過少"

#: src/gram.y:2005 src/gram.y:3813
#, c-format
msgid "too many arguments in call to `%s'"
msgstr "呼叫 `%s' 時引數過多"

#: src/gram.y:2115
msgid "$@ is allowed only in variadic functions"
msgstr "$@ 僅可用於 variadic 函式"

#: src/gram.y:2198
#, c-format
msgid "expected numeric value, but found `%s'"
msgstr "預期為數值，但找到 `%s'"

#: src/gram.y:2226
msgid "exception code not a number"
msgstr "例外碼不是數字"

#: src/gram.y:2229 src/prog.c:2101
#, c-format
msgid "invalid exception number: %lu"
msgstr "無效的例外編號：%lu"

#: src/gram.y:2241 src/gram.y:2253
msgid "`return' outside of a function"
msgstr "`return' 在函式外部"

#: src/gram.y:2244
msgid "`return' with no value, in function returning non-void"
msgstr "在非 void 回傳值的函式中，`return' 沒有值"

#: src/gram.y:2258
msgid "`return' with a value, in function returning void"
msgstr "在 void 回傳值的函式中，`return' 帶有值"

#: src/gram.y:2286
msgid "unspecified data type in conditional expression: please, report"
msgstr "條件運算式中有未指定的資料型別：請回報"

#: src/gram.y:2306
msgid "`on poll' used without prior `require poll'"
msgstr "`on poll' 使用之前未先 `require poll'"

#: src/gram.y:2316
msgid "recipient address not specified in `on poll' construct"
msgstr "`on poll' 結構中未指定收件者位址"

#: src/gram.y:2453
msgid "invalid data type, expected number"
msgstr "無效的資料型別，預期為數字"

#: src/gram.y:2769 src/gram.y:3271
#, c-format
msgid "INTERNAL ERROR at %s:%d, unexpected node type %d"
msgstr "內部錯誤於 %s：%d，未預期的節點型別 %d"

#: src/gram.y:3299
msgid "nothing to pop"
msgstr "沒有可彈出的項目"

#: src/gram.y:3343
#, c-format
msgid "unknown regexp flag: %s"
msgstr "未知的正規表達式旗標：%s"

#: src/gram.y:3370 src/gram.y:3402
msgid "invalid size: numeric overflow occurred"
msgstr "無效的大小：發生數值溢位"

#: src/gram.y:3397
#, c-format
msgid "invalid size suffix (near %s)"
msgstr "無效的大小後綴（在 %s 附近）"

#: src/gram.y:3626
#, c-format
msgid "$%d is not a number"
msgstr "$%d 不是數字"

#: src/gram.y:3915
#, c-format
msgid "cannot convert %s to %s"
msgstr "無法將 %s 轉換為 %s"

#: src/gram.y:3942
msgid "$@ cannnot be used to supply actual arguments for mandatory or optional parameters"
msgstr "$@ 無法用於提供強制或選用引數的實際引數"

#: src/gram.y:3993
msgid "cannot define variable of unspecified type"
msgstr "無法定義未指定型別的變數"

#: src/gram.y:4005
#, c-format
msgid "INTERNAL ERROR at %s:%d, declaring %s %s"
msgstr "內部錯誤於 %s：%d，宣告 %s %s"

#: src/gram.y:4013
#, c-format
msgid "automatic variable `%s' is shadowing a parameter"
msgstr "自動變數 `%s' 正在遮蔽參數"

#: src/gram.y:4018
#, c-format
msgid "automatic variable `%s' is shadowing a global"
msgstr "自動變數 `%s' 正在遮蔽全域"

#: src/gram.y:4026
#, c-format
msgid "parameter `%s' is shadowing a global"
msgstr "參數 `%s' 正在遮蔽全域"

#: src/gram.y:4040 src/gram.y:4053
#, c-format
msgid "redeclaring `%s' as different data type"
msgstr "將 `%s' 重新宣告為不同的資料型別"

#: src/gram.y:4062
#, c-format
msgid "duplicate variable: %s"
msgstr "變數重複：%s"

#: src/gram.y:4069
#, c-format
msgid "duplicate parameter: %s"
msgstr "參數重複：%s"

#: src/gram.y:4079
#, c-format
msgid "variable name `%s' clashes with a constant name"
msgstr "變數名稱 `%s' 與常數名稱衝突"

#: src/gram.y:4120
#, c-format
msgid "cannot convert `%s' to number"
msgstr "無法將 `%s' 轉換為數字"

#: src/gram.y:4161
#, c-format
msgid "redefining variable %s"
msgstr "正在重新定義變數 %s"

#: src/gram.y:4187
#, c-format
msgid "warning: no such variable: %s"
msgstr "警告：沒有此變數：%s"

#: src/gram.y:4191
#, c-format
msgid "error initialising variable %s: incompatible types"
msgstr "初始化變數 %s 錯誤：型別不相容"

#: src/gram.y:4243
#, c-format
msgid "variable `%s' already initialized"
msgstr "變數 `%s' 已初始化"

#: src/gram.y:4246
msgid "this is the location of the previous initialization"
msgstr "這是之前初始化所在的位置"

#: src/gram.y:4277
#, c-format
msgid "INTERNAL ERROR at %s:%d: variable to be initialized is not declared"
msgstr "內部錯誤於 %s:%d：要初始化的變數未宣告"

#: src/gram.y:4303
#, c-format
msgid "INTERNAL ERROR at %s:%d: variable to be initialized has wrong type"
msgstr "內部錯誤於 %s:%d：要初始化的變數類型錯誤"

#: src/gram.y:4691
msgid "$N is allowed only in functions with variable number of arguments"
msgstr "$N 僅允許在可變參數數量的函式中使用"

#: src/gram.y:4697
msgid "argument number too high"
msgstr "引數數量過高"

#: src/gram.y:4746
#, c-format
msgid "use of uninitialized variable '%s'"
msgstr "使用未初始化的變數 '%s'"

#: src/lex.l:180
#, c-format
msgid "unable to start external preprocessor `%s': %s"
msgstr "無法啟動外部前置處理程式 `%s': %s"

#: src/lex.l:189
#, c-format
msgid "cannot open %s: %s"
msgstr "無法開啟 %s: %s"

#: src/lex.l:217
#, c-format
msgid "cannot open `%s': %s"
msgstr "無法開啟 `%s': %s"

#: src/lex.l:221
#, c-format
msgid "`%s' is not a regular file"
msgstr "`%s' 不是普通檔案"

#: src/lex.l:230
msgid "recursive inclusion"
msgstr "遞迴引入"

#: src/lex.l:233
#, c-format
msgid "`%s' already included here"
msgstr "`%s' 已在此處引入"

#: src/lex.l:236
#, c-format
msgid "`%s' already included at top level"
msgstr "`%s' 已在頂層引入"

#: src/lex.l:288
#, c-format
msgid "variable %s is not defined"
msgstr "變數 %s 未定義"

#: src/lex.l:457
msgid "numeric value out of range"
msgstr "數值超出範圍"

#: src/lex.l:710
msgid "including a module file is unreliable and may cause subtle errors"
msgstr "引入模組檔案不可靠，可能導致細微錯誤"

#: src/lex.l:713
#, c-format
msgid "use `require %*.*s' instead"
msgstr "請改用 `require %*.*s'"

#: src/lex.l:726
msgid "unexpected end of file"
msgstr "未預期的檔案結尾"

#: src/lex.l:734
msgid "misplaced `module'"
msgstr "錯誤放置的 `module'"

#: src/lex.l:1277
msgid "end of file in comment"
msgstr "註解中的檔案結尾"

#: src/lex.l:1285
msgid "end of file in string"
msgstr "字串中的檔案結尾"

#: src/lex.l:1290
msgid "end of file in shell block"
msgstr "Shell 區塊中的檔案結尾"

#: src/main.c:129
#, c-format
msgid "cannot create trace stream, using standard log: %s"
msgstr "無法建立追蹤串流，改用標準日誌：%s"

#: src/main.c:196
#, c-format
msgid "cannot open file `%s': %s"
msgstr "無法開啟檔案 `%s': %s"

#: src/main.c:284
msgid "mailfromd -- a general purpose milter daemon"
msgstr "mailfromd -- 通用 milter 常駐程式"

#: src/main.c:379
msgid "-O level must be a non-negative integer"
msgstr "-O 等級必須是非負整數"

#: src/main.c:393
#, c-format
msgid "expected assignment, but found `%s'"
msgstr "預期為賦值，但找到 `%s'"

#: src/main.c:423
msgid "preprocessor options given, but no default preprocessor defined: use the --preprocessor option"
msgstr "已指定前置處理程式選項，但未定義預設前置處理程式：請使用 --preprocessor 選項"

#: src/main.c:438 src/main.c:449
msgid "Your configuration file disables passing defines to the preprocessor"
msgstr "您的設定檔已停用將定義傳遞給前置處理程式"

#: src/main.c:459
#, c-format
msgid "%s: not a valid interval"
msgstr "%s：非有效的間隔"

#: src/main.c:464
#, c-format
msgid "invalid milter timeout: %s"
msgstr "無效的 milter 逾時：%s"

#: src/main.c:548
msgid "HANDLER"
msgstr "HANDLER"

#: src/main.c:549
msgid "run in test mode"
msgstr "以測試模式執行"

#: src/main.c:551
msgid "FUNC"
msgstr "FUNC"

#: src/main.c:552
msgid "run script and execute function FUNC (\"main\" if not given)"
msgstr "執行腳本並執行函式 FUNC（若未指定則為 \"main\"）"

#: src/main.c:555
msgid "check syntax and exit"
msgstr "檢查語法並結束"

#: src/main.c:559
msgid "show compilation defaults"
msgstr "顯示編譯預設值"

#: src/main.c:563
msgid "run in daemon mode (default)"
msgstr "以常駐程式模式執行（預設）"

#: src/main.c:567
msgid "preprocess source files and exit"
msgstr "前處理原始檔案並結束"

#: src/main.c:571
msgid "compile files"
msgstr "編譯檔案"

#: src/main.c:574
msgid "load library"
msgstr "載入程式庫"

#: src/main.c:576 src/main.c:581 src/main.c:585 src/mfdbtool.c:278
#: src/srvcfg.c:658
msgid "DIR"
msgstr "DIR"

#: src/main.c:577
msgid "add DIR to the load path"
msgstr "將 DIR 加入載入路徑"

#: src/main.c:582
msgid "add the directory DIR to the list of directories to be searched for header files"
msgstr "將目錄 DIR 加入搜尋標頭檔的目錄清單"

#: src/main.c:586
msgid "add the directory DIR to the list of directories to be searched for MFL module files"
msgstr "將目錄 DIR 加入搜尋 MFL 模組檔案的目錄清單"

#: src/main.c:590
msgid "set communication socket"
msgstr "設定通訊插口"

#: src/main.c:594
msgid "set callout socket"
msgstr "設定 callout 插口"

#: src/main.c:597
msgid "run in mtasim compatibility mode"
msgstr "以 mtasim 相容模式執行"

#: src/main.c:600
msgid "set code optimization level"
msgstr "設定程式碼最佳化等級"

#: src/main.c:602
msgid "VAR=VALUE"
msgstr "VAR=VALUE"

#: src/main.c:603
msgid "assign VALUE to VAR"
msgstr "將 VALUE 賦值給 VAR"

#: src/main.c:606
msgid "read relayed domains from FILE"
msgstr "從 FILE 讀取中繼網域"

#: src/main.c:612
msgid "divert output of the \"echo\" instruction to FILE"
msgstr "將 \"echo\" 指令的輸出導向至 FILE"

#: src/main.c:615
msgid "Preprocessor options"
msgstr "前處理程式選項"

#: src/main.c:616
msgid "COMMAND"
msgstr "COMMAND"

#: src/main.c:617
msgid "use command as external preprocessor"
msgstr "使用指令作為外部前置處理程式"

#: src/main.c:620
msgid "disable the use of external preprocessor"
msgstr "停用外部前置處理程式"

#: src/main.c:622
msgid "NAME[=VALUE]"
msgstr "NAME[=VALUE]"

#: src/main.c:623
msgid "define a preprocessor symbol NAME as having VALUE, or empty"
msgstr "將前置處理符號 NAME 定義為 VALUE，或空值"

#: src/main.c:626
msgid "undefine a preprocessor symbol NAME"
msgstr "取消定義前置處理符號 NAME"

#: src/main.c:629
msgid "Timeout control"
msgstr "逾時控制"

#: src/main.c:630
msgid "TIME"
msgstr "TIME"

#: src/main.c:631
msgid "set MTA connection timeout"
msgstr "設定 MTA 連線逾時"

#: src/main.c:634
msgid "Informational and debugging options"
msgstr "資訊與除錯選項"

#: src/main.c:636
msgid "print location column numbers in compiler diagnostics messages"
msgstr "在編譯器診斷訊息中列印位置欄號"

#: src/main.c:639
msgid "trace executed actions"
msgstr "追蹤已執行的動作"

#: src/main.c:641
msgid "MODULES"
msgstr "MODULES"

#: src/main.c:642
msgid "enable filter program tracing"
msgstr "啟用篩選程式追蹤"

#: src/main.c:646
msgid "dump disassembled code"
msgstr "傾印反組譯程式碼"

#: src/main.c:650
msgid "dump grammar traces"
msgstr "傾印文法追蹤"

#: src/main.c:653
msgid "dump lexical analyzer traces"
msgstr "傾印詞彙分析器追蹤"

#: src/main.c:656
msgid "dump parser tree"
msgstr "傾印語法剖析樹"

#: src/main.c:659
msgid "show used Sendmail macros"
msgstr "顯示已使用的 Sendmail 巨集"

#: src/main.c:662
msgid "produce a cross-reference listing"
msgstr "產生交互參考列表"

#: src/main.c:669
msgid "enable stack traces on runtime errors"
msgstr "在執行期錯誤時啟用堆疊追蹤"

#: src/main.c:711
#, c-format
msgid "Invalid milter timeout: %lu"
msgstr "無效的 milter 逾時：%lu"

#: src/main.c:729
msgid "not enough arguments"
msgstr "引數不足"

#: src/main.c:732
msgid "too many arguments"
msgstr "引數過多"

#: src/main.c:852
msgid "expected string or list of strings"
msgstr "預期為字串或字串列表"

#: src/main.c:862
msgid "Dump stack traces on runtime errors."
msgstr "在執行期錯誤時傾印堆疊追蹤。"

#: src/main.c:865
msgid "Set milter timeout."
msgstr "設定 milter 逾時。"

#: src/main.c:866 src/srvcfg.c:421 src/srvcfg.c:426 src/srvcfg.c:431
#: src/srvcfg.c:436 src/srvcfg.c:442 src/srvcfg.c:448 src/srvcfg.c:454
#: pmult/pmult.c:721
msgid "time: interval"
msgstr "時間：間隔"

#: src/main.c:868
msgid "Sets the URL of the default callout server."
msgstr "設定預設 callout 伺服器的 URL。"

#: src/main.c:869
msgid "url"
msgstr "url"

#: src/main.c:871
msgid "Add directories to the list of directories to be searched for header files.  Argument is a list of directory names separated by colons."
msgstr "將目錄加入搜尋標頭檔的目錄清單。引數是以冒號分隔的目錄名稱列表。"

#: src/main.c:874 src/main.c:879
msgid "path: string"
msgstr "路徑：字串"

#: src/main.c:876
msgid "Add directories to the list of directories to be searched for MFL modules.  Argument is a list of directory names separated by colons."
msgstr "將目錄加入搜尋 MFL 模組的目錄清單。引數是以冒號分隔的目錄名稱列表。"

#: src/main.c:881
msgid "Initialize a mailfromd variable <var> to <value>."
msgstr "將 mailfromd 變數 <var> 初始化為 <value>。"

#: src/main.c:882
msgid "var: string> <value: string-or-number"
msgstr "var：string> <value：string-or-number"

#: src/main.c:884
msgid "Read filter script from <file>."
msgstr "從 <file> 讀取篩選腳本。"

#: src/main.c:885 src/srvcfg.c:527
msgid "file"
msgstr "file"

#: src/main.c:887
msgid "Trace executed actions."
msgstr "追蹤已執行的動作。"

#: src/main.c:889
msgid "Enable filter program tracing."
msgstr "啟用篩選程式追蹤。"

#: src/main.c:890
msgid "modules: list"
msgstr "modules：list"

#: src/main.c:894
msgid "Read relayed domain names from the file"
msgstr "從檔案讀取中繼網域名稱"

#: src/main.c:895
msgid "file: string"
msgstr "file：string"

#: src/main.c:939
msgid "Configure MFL runtime values."
msgstr "設定 MFL 執行期值。"

#: src/main.c:1006
msgid "unknown"
msgstr "未知"

#: src/main.c:1209
#, c-format
msgid "no servers defined; will listen on %s"
msgstr "未定義伺服器；將監聽 %s"

#: src/main.c:1299
#, c-format
msgid "cannot create echo output stream: %s"
msgstr "無法建立 echo 輸出串流：%s"

#: src/main.c:1353
msgid "extra arguments in daemon mode"
msgstr "常駐程式模式中的多餘引數"

#: src/main.c:1364
#, c-format
msgid "script file specified twice (%s and %s)"
msgstr "腳本檔案被指定兩次（%s 與 %s）"

#: src/main.c:1405
msgid "extra arguments in this mode"
msgstr "此模式中的多餘引數"

#: src/main.c:1487
#, c-format
msgid "filter script file %s/%s%s does not exist or is unreadable"
msgstr "篩選腳本檔案 %s/%s%s 不存在或無法讀取"

#: src/main.c:1531
#, c-format
msgid "function %s is not defined"
msgstr "函式 %s 未定義"

#: src/main.c:1537
#, c-format
msgid "function %s must take variable number of arguments"
msgstr "函式 %s 必須接受可變數量的引數"

#: src/main.c:1543
#, c-format
msgid "function %s must return number"
msgstr "函式 %s 必須傳回數字"

#: src/main.c:1563
msgid "script file is given without full file name"
msgstr "腳本檔案未使用完整檔案名稱"

#: src/mfdbtool.c:47
msgid "operation is not applicable"
msgstr "作業不適用"

#: src/mfdbtool.c:60
msgid "database file name is not given"
msgstr "未提供資料庫檔案名稱"

#: src/mfdbtool.c:114
msgid "list is not applicable to this DB format"
msgstr "list 不適用於此資料庫格式"

#: src/mfdbtool.c:146
msgid "expire is not applicable to this DB format"
msgstr "expire 不適用於此資料庫格式"

#: src/mfdbtool.c:160
msgid "compact is not applicable to this DB format"
msgstr "compact 不適用於此資料庫格式"

#: src/mfdbtool.c:169
msgid "mfdbtool -- Mailfromd database management tool"
msgstr "mfdbtool -- Mailfromd 資料庫管理工具"

#: src/mfdbtool.c:237
msgid "Database management commands"
msgstr "資料庫管理指令"

#: src/mfdbtool.c:239
msgid "delete given entries from the database"
msgstr "從資料庫刪除指定的項目"

#: src/mfdbtool.c:242
msgid "list given database (default cache)"
msgstr "列出指定的資料庫（預設快取）"

#: src/mfdbtool.c:245
msgid "delete expired entries from the database"
msgstr "從資料庫刪除已過期的項目"

#: src/mfdbtool.c:248
msgid "compact the database"
msgstr "壓縮資料庫"

#: src/mfdbtool.c:251
msgid "Command modifiers"
msgstr "命令修飾符"

#: src/mfdbtool.c:253
msgid "DB file name to operate upon"
msgstr "要操作的 DB 檔案名稱"

#: src/mfdbtool.c:255
msgid "FORMAT"
msgstr "格式"

#: src/mfdbtool.c:256
msgid "format of the DB file to operate upon"
msgstr "要操作的 DB 檔案格式"

#: src/mfdbtool.c:259
msgid "ignore failed reads while compacting the database"
msgstr "壓縮資料庫時忽略讀取失敗"

#: src/mfdbtool.c:261
msgid "RATE"
msgstr "速率"

#: src/mfdbtool.c:262
msgid "predict when the user will be able to send next message"
msgstr "預測使用者何時能傳送下一則訊息"

#: src/mfdbtool.c:265
msgid "with --compact or --expire: apply the operation to all available databases"
msgstr "使用 --compact 或 --expire：將操作套用至所有可用資料庫"

#: src/mfdbtool.c:274 src/srvcfg.c:667
msgid "set debugging level"
msgstr "設定偵錯等級"

#: src/mfdbtool.c:277
msgid "Configuration modifiers"
msgstr "組態修飾符"

#: src/mfdbtool.c:279 src/srvcfg.c:659
msgid "set new program state directory"
msgstr "設定新的程式狀態目錄"

#: src/mfdbtool.c:282
msgid "set database expiration interval to NUMBER seconds"
msgstr "將資料庫過期間隔設為 NUMBER 秒"

#: src/mfdbtool.c:305 src/srvcfg.c:536
msgid "Default database type"
msgstr "預設資料庫類型"

#: src/mfdbtool.c:306 src/srvcfg.c:537
msgid "type"
msgstr "類型"

#: src/mfdbtool.c:313 src/srvcfg.c:533
msgid "Set program state directory."
msgstr "設定程式狀態目錄。"

#: src/mfdbtool.c:314
msgid "dir"
msgstr "目錄"

#: src/mfdbtool.c:316 src/srvcfg.c:493
msgid ""
"Set mailfromd debugging level. Argument is a semicolon-separated list of debugging specifications. A simplified specification syntax is:\n"
"   [!]<category: string>[.<level: string>,<level: string>...]\n"
"For details, please see the Mailfromd manual, section 3.18 \"Logging\n"
"and Debugging\", GNU Mailutils manual, section 3.3 \"Debugging\",\n"
"or visit <http://mailutils.org/wiki/Debug_level>."
msgstr ""
"設定 mailfromd 偵錯等級。引數是以分號分隔的偵錯規格清單。簡化的規格語法為：\n"
"   [!]<category: string>[.<level: string>,<level: string>...]\n"
"詳情請參閱 Mailfromd 手冊第 3.18 節「記錄與偵錯」、GNU Mailutils 手冊第 3.3 節「偵錯」，或造訪 <http://mailutils.org/wiki/Debug_level>。"

#: src/mfdbtool.c:322 src/srvcfg.c:499 pmult/pmult.c:705
msgid "spec: list"
msgstr "規格：列表"

#: src/mfdbtool.c:363 src/srvcfg.c:781
#, c-format
msgid "cannot initialize DBM hint: %s"
msgstr "無法初始化 DBM 提示：%s"

#: src/mfdbtool.c:372
msgid "you must specify one of --list, --delete, --expire or --compat"
msgstr "您必須指定 --list、--delete、--expire 或 --compat 之一"

#: src/mfdbtool.c:378
msgid "--all is meaningful only with --expire or --compact option"
msgstr "--all 僅在搭配 --expire 或 --compact 選項時有意義"

#: src/mfdbtool.c:383
msgid "--format is incompatible with --all"
msgstr "--format 與 --all 不相容"

#: src/pp.c:180
#, c-format
msgid "%s: no such file or directory"
msgstr "%s：沒有此檔案或目錄"

#: src/pp.c:235
#, c-format
msgid "input file %s is not readable: %s"
msgstr "輸入檔案 %s 無法讀取：%s"

#: src/pp.c:256
#, c-format
msgid "cannot parse include line: %s"
msgstr "無法解析 include 列：%s"

#: src/pp.c:327 src/pp.c:353
#, c-format
msgid "cannot parse #line line: %s"
msgstr "無法解析 #line 列：%s"

#: src/pp.c:340 src/pp.c:360
msgid "malformed #line statement"
msgstr "#line 陳述式格式錯誤"

#: src/pp.c:357
msgid "invalid #line statement"
msgstr "無效的 #line 陳述式"

#: src/pp.c:378
msgid "Enable preprocessor (default)."
msgstr "啟用前置處理（預設）。"

#: src/pp.c:380
msgid "Preprocessor command line stub."
msgstr "前置處理命令列 stub。"

#: src/pp.c:382
msgid "Pass include search path to the preprocessor via -I options (default: false)"
msgstr "透過 -I 選項將 include 搜尋路徑傳遞給前置處理（預設：false）"

#: src/pp.c:384
msgid "Pass feature definition and defines from the command line to the preprocessor via -D options (default: true)"
msgstr "透過 -D 命令列選項將功能定義和定義傳遞給前置處理（預設：true）"

#: src/pp.c:386
msgid "Name of the preprocessor setup file.  Looked up in include search path, unless absolute."
msgstr "前置處理設定檔案名稱。在 include 搜尋路徑中尋找，除非為絕對路徑。"

#: src/pp.c:397
msgid "MFL preprocessor configuration."
msgstr "MFL 前置處理組態。"

#: src/pp.c:521
#, c-format
msgid "preprocessor exited with status %d"
msgstr "前置處理以狀態 %d 結束"

#: src/pp.c:525
#, c-format
msgid "preprocessor terminated on signal %d"
msgstr "前置處理因訊號 %d 而終止"

#: src/pp.c:528
msgid "preprocessor stopped"
msgstr "前置處理已停止"

#: src/pp.c:530
msgid "preprocessor terminated abnormally"
msgstr "前置處理異常終止"

#: src/pp.c:560
msgid "preprocessor options given, but the use of preprocessor is disabled; use the --preprocessor option"
msgstr "已指定前置處理選項，但前置處理已停用；請使用 --preprocessor 選項"

#: src/pragma.c:175
msgid "too few arguments in pragma"
msgstr "pragma 中的引數過少"

#: src/pragma.c:179
msgid "too many arguments in pragma"
msgstr "pragma 中的引數過多"

#: src/pragma.c:205
#, c-format
msgid "error parsing pragma: %s"
msgstr "解析 pragma 錯誤：%s"

#: src/pragma.c:211
msgid "empty pragma"
msgstr "空的 pragma"

#: src/pragma.c:218
msgid "unknown pragma"
msgstr "未知的 pragma"

#: src/prog.c:614
#, c-format
msgid "stack segment expanded, new size=%lu"
msgstr "堆疊區段已擴展，新大小=%lu"

#: src/prog.c:690
msgid "stack trace:"
msgstr "堆疊追蹤："

#: src/prog.c:702
msgid "stack trace finishes"
msgstr "堆疊追蹤結束"

#: src/prog.c:711
#, c-format
msgid "RUNTIME WARNING near %s:%u: "
msgstr "執行期警告於 %s：%u 附近："

#: src/prog.c:726
#, c-format
msgid "RUNTIME ERROR near %s:%u: "
msgstr "執行期錯誤於 %s：%u 附近："

#: src/prog.c:798
msgid "stack underflow"
msgstr "堆疊下溢"

#: src/prog.c:809 src/prog.c:829
msgid "heap overrun; increase #pragma stacksize"
msgstr "堆積超額；請增加 #pragma stacksize"

#: src/prog.c:883 src/prog.c:894 src/prog.c:923
msgid "memory chunk too big to fit into heap"
msgstr "記憶體區塊過大而無法放入堆積"

#: src/prog.c:1042
msgid "dupn: negative count"
msgstr "dupn：負數計數"

#: src/prog.c:1167
msgid "Out of stack space; increase #pragma stacksize"
msgstr "堆疊空間不足；請增加 #pragma stacksize"

#: src/prog.c:1195
msgid "no previous regular expression"
msgstr "沒有先前的正規表達式"

#: src/prog.c:1199
msgid "invalid back-reference number"
msgstr "無效的反向參考數字"

#: src/prog.c:1779
#, c-format
msgid "invalid transform string \"%s\": %s"
msgstr "無效的轉換字串 \"%s\"：%s"

#: src/prog.c:1950
msgid "`accept' causes previous message modification commands to be ignored; call mmq_purge() prior to `accept', to suppress this warning"
msgstr "`accept' 會使先前的訊息修改命令被忽略；請在 `accept' 之前呼叫 mmq_purge() 以隱藏此警告"

#: src/prog.c:2548
msgid "pc out of range"
msgstr "pc 超出範圍"

#: src/prog.c:2562
msgid "out of memory while formatting error message:"
msgstr "格式化錯誤訊息時記憶體不足："

#: src/prog.c:2625
#, c-format
msgid "unknown exception: %d: %s"
msgstr "未知的例外：%d：%s"

#: src/prog.c:2646
#, c-format
msgid "uncaught exception %s: %s"
msgstr "未捕獲的例外 %s：%s"

#: src/prog.c:2733
#, c-format
msgid "%scannot create temporary stream: %s"
msgstr "%s無法建立暫存串流：%s"

#: src/prog.c:2768
#, c-format
msgid "%stemporary stream seek failed: %s"
msgstr "%s暫存串流搜尋失敗：%s"

#: src/prog.c:2783
#, c-format
msgid "%stemporary stream write failed: %s"
msgstr "%s暫存串流寫入失敗：%s"

#: src/prog.c:3011
#, c-format
msgid "unknown built-in private data requested (%d)"
msgstr "要求的未知內建私用資料（%d）"

#: src/prog.c:3016
msgid "no built-in private data registered"
msgstr "沒有已註冊的內建私用資料"

#: src/prog.c:3024
#, c-format
msgid "initial allocation for built-in private data #%d failed"
msgstr "內建私用資料 #%d 的初始配置失敗"

#: src/prog.c:3130
msgid "invalid use of $macro in startup handler"
msgstr "在 startup 處理常式中使用 $macro 無效"

#: src/prog.c:3137
msgid "invalid use of milter action in startup handler"
msgstr "在 startup 處理常式中使用 milter 動作無效"

#: src/prog.c:3143
msgid "invalid use of message modification function in startup handler"
msgstr "在 startup 處理常式中使用訊息修改函式無效"

#: src/spf.c:69
#, c-format
msgid "spf_data_init: %s: %s"
msgstr "spf_data_init：%s：%s"

#: src/spf.c:81
#, c-format
msgid "spf_data_init: can't convert IP address %s: %s"
msgstr "spf_data_init：無法轉換 IP 位址 %s：%s"

#: src/srvcfg.c:117
#, c-format
msgid "%s: error parsing URL"
msgstr "%s：解析 URL 錯誤"

#: src/srvcfg.c:163 src/srvcfg.c:594
#, c-format
msgid "`%s' is not a directory"
msgstr "`%s' 不是目錄"

#: src/srvcfg.c:167 src/srvcfg.c:599
#, c-format
msgid "state directory `%s' is not an absolute file name"
msgstr "狀態目錄 `%s' 不是絕對檔案名稱"

#: src/srvcfg.c:206
#, c-format
msgid "INTERNAL ERROR: no such server type: %s"
msgstr "內部錯誤：沒有此伺服器類型：%s"

#: src/srvcfg.c:210 src/srvcfg.c:325
#, c-format
msgid "INTERNAL ERROR at %s:%d: server function not defined"
msgstr "內部錯誤於 %s：%d：伺服器函式未定義"

#: src/srvcfg.c:264
msgid "Server ID."
msgstr "伺服器 ID。"

#: src/srvcfg.c:268
msgid "Listen on this URL."
msgstr "在此 URL 上監聽。"

#: src/srvcfg.c:269 pmult/pmult.c:677
msgid "url: string"
msgstr "url：字串"

#: src/srvcfg.c:273
msgid "Maximum number of instances allowed for this server."
msgstr "此伺服器允許的最大實例數。"

#: src/srvcfg.c:276
msgid "Single-process mode."
msgstr "單一處理程序模式。"

#: src/srvcfg.c:279
msgid "Reuse existing socket (default)."
msgstr "重複使用現有插口（預設）。"

#: src/srvcfg.c:284
msgid "Server-dependent options"
msgstr "伺服器相依選項"

#: src/srvcfg.c:287
msgid "Deprecated. It is equivalent to `option \"default\"', i.e. it marks this callout server as the default one."
msgstr "已淘汰。等同於 `option \"default\"'，即將此呼叫伺服器標記為預設值。"

#: src/srvcfg.c:291
msgid "Size of queue of pending connections."
msgstr "擱置連線佇列大小。"

#: src/srvcfg.c:322
msgid "unknown server type"
msgstr "未知的伺服器類型"

#: src/srvcfg.c:369
msgid "Configure server."
msgstr "設定伺服器。"

#: src/srvcfg.c:370
msgid "label"
msgstr "標籤"

#: src/srvcfg.c:396
#, c-format
msgid "unknown timeout class: %s"
msgstr "未知的逾時類別：%s"

#: src/srvcfg.c:420
msgid "Initial SMTP connection timeout."
msgstr "初始 SMTP 連線逾時。"

#: src/srvcfg.c:425
msgid "Timeout for initial SMTP response."
msgstr "初始 SMTP 回應逾時。"

#: src/srvcfg.c:430
msgid "Timeout for HELO response."
msgstr "HELO 回應逾時。"

#: src/srvcfg.c:435
msgid "Timeout for MAIL response."
msgstr "MAIL 回應逾時。"

#: src/srvcfg.c:441
msgid "Timeout for RCPT response."
msgstr "RCPT 回應逾時。"

#: src/srvcfg.c:447
msgid "Timeout for RSET response."
msgstr "RSET 回應逾時。"

#: src/srvcfg.c:453
msgid "Timeout for QUIT response."
msgstr "QUIT 回應逾時。"

#: src/srvcfg.c:465
msgid "Set SMTP timeouts."
msgstr "設定 SMTP 逾時。"

#. TRANSLATORS: soft and hard are keywords, do not translate
#. them
#: src/srvcfg.c:468
msgid "[soft | hard]"
msgstr "[soft | hard]"

#: src/srvcfg.c:501
msgid "Enable transcript of call-out SMTP sessions."
msgstr "啟用呼叫 SMTP 工作階段轉錄。"

#. TRANSLATORS: Don't translate "ondemand" - it is a keyword.
#: src/srvcfg.c:506
msgid "Use of STARTTLS in callout sessions (default: ondemand)."
msgstr "在呼叫工作階段中使用 STARTTLS（預設：ondemand）。"

#. TRANSLATORS: Don't translate keywords to the right of arg:
#: src/srvcfg.c:508
msgid "arg: never|always|ondemand"
msgstr "引數：never|always|ondemand"

#: src/srvcfg.c:513
msgid "Timeout for all SMTP I/O operations."
msgstr "所有 SMTP I/O 操作逾時。"

#: src/srvcfg.c:514
msgid "time: seconds"
msgstr "時間：秒"

#: src/srvcfg.c:517
msgid "Set source address for TCP connections."
msgstr "設定 TCP 連線的來源位址。"

#: src/srvcfg.c:518
msgid "ip: ipaddr"
msgstr "ip：ipaddr"

#: src/srvcfg.c:520
msgid "Retain the supplementary group <name> when switching to user privileges"
msgstr "切換至使用者權限時保留補充群組 <name>"

#: src/srvcfg.c:522
msgid "group: string"
msgstr "群組：字串"

#: src/srvcfg.c:524
msgid "Switch to this user privileges after startup."
msgstr "啟動後切換至此使用者權限。"

#: src/srvcfg.c:526
msgid "Set file to store PID value in."
msgstr "設定儲存 PID 值的檔案。"

#: src/srvcfg.c:531 pmult/pmult.c:695
msgid "Set logger stream."
msgstr "設定記錄器串流。"

#: src/srvcfg.c:534 pmult/pmult.c:715
msgid "dir: string"
msgstr "目錄：字串"

#: src/srvcfg.c:544
msgid "Set the domain name for EHLO command."
msgstr "設定 EHLO 命令的網域名稱。"

#: src/srvcfg.c:546
msgid "Set email address for use in SMTP `MAIL FROM' command.  Argument is an email address or a comma-separated list of addresses.  Use <> for null address.  Other addresses can be given without angle brackets."
msgstr "設定用於 SMTP `MAIL FROM' 命令的電子郵件地址。引數是電子郵件地址或逗號分隔的地址清單。使用 <> 表示空位址。其他地址可以不使用角括號。"

#: src/srvcfg.c:550
msgid "addr"
msgstr "位址"

#: src/srvcfg.c:552
msgid "Use the SMTP VRFY command, when available."
msgstr "使用 SMTP VRFY 命令（如有）。"

#: src/srvcfg.c:631
msgid "invalid pidfile name: must be absolute"
msgstr "無效的 pid 檔案名稱：必須為絕對路徑"

#: src/srvcfg.c:638
msgid "Server configuration modifiers"
msgstr "伺服器組態修飾符"

#: src/srvcfg.c:640
msgid "stay in foreground"
msgstr "留在前景"

#: src/srvcfg.c:643
msgid "run in single-process mode"
msgstr "以單一處理程序模式執行"

#: src/srvcfg.c:646
msgid "set pidfile name"
msgstr "設定 pid 檔案名稱"

#: src/srvcfg.c:649
msgid "switch to this user privileges after startup"
msgstr "啟動後切換至此使用者權限"

#: src/srvcfg.c:655
msgid "ADDRESS"
msgstr "位址"

#: src/srvcfg.c:656
msgid "set source address for TCP connections"
msgstr "設定 TCP 連線的來源位址"

#: src/srvcfg.c:662
msgid "Logging and debugging options"
msgstr "記錄與除錯選項"

#: src/srvcfg.c:664
msgid "enable transcript of SMTP sessions"
msgstr "啟用 SMTP 工作階段的轉錄"

#: src/srvcfg.c:677 pmult/pmult.c:829
msgid "log to stderr"
msgstr "記錄到 stderr"

#: src/srvcfg.c:680 pmult/pmult.c:826
msgid "log to syslog (default)"
msgstr "記錄到 syslog（預設）"

#: src/srvcfg.c:682
msgid "STREAM"
msgstr "STREAM"

#: src/srvcfg.c:683
msgid "select logger stream"
msgstr "選擇記錄器串流"

#: src/srvcfg.c:686 pmult/pmult.c:832
msgid "set the identifier used in syslog messages to STRING"
msgstr "設定 syslog 訊息中使用的識別字為 STRING"

#: src/srvcfg.c:689
msgid "debug messages include source information"
msgstr "除錯訊息包含原始碼資訊"

#: src/srvcfg.c:795 pmult/pmult.c:2284
#, c-format
msgid "unsupported logger stream: %s"
msgstr "不支援的記錄器串流：%s"

#: src/symbols.c:151
#, c-format
msgid "cannot compile regex (%s): %s"
msgstr "無法編譯正則表達式 (%s)：%s"

#: src/symbols.c:271
#, c-format
msgid "cannot install builtin function %s: %s"
msgstr "無法安裝內建函式 %s：%s"

#: src/symbols.c:349
#, c-format
msgid "cannot import symbol `%s': %s"
msgstr "無法匯入符號「%s」：%s"

#: src/symbols.c:365
#, c-format
msgid "symbol import conflict: %s"
msgstr "符號匯入衝突：%s"

#: src/symbols.c:366
msgid "imported symbol location"
msgstr "匯入符號位置"

#: src/symbols.c:367
msgid "conflicting symbol location"
msgstr "衝突符號位置"

#: src/symbols.c:553
#, c-format
msgid "cannot install module %s: %s"
msgstr "無法安裝模組 %s：%s"

#: src/symbols.c:754
#, c-format
msgid "cannot install variable %s: %s"
msgstr "無法安裝變數 %s：%s"

#: src/symbols.c:777
#, c-format
msgid "INTERNAL ERROR: variable %s not found"
msgstr "內部錯誤：找不到變數 %s"

#: src/symbols.c:817
#, c-format
msgid "cannot install function %s: %s"
msgstr "無法安裝函式 %s：%s"

#: src/symbols.c:828
#, c-format
msgid "redefinition of function %s by alias %s"
msgstr "函式 %s 被別名 %s 重複定義"

#: src/symbols.c:834
#, c-format
msgid "redefinition of function %s"
msgstr "函式 %s 重複定義"

#: src/symbols.c:894
#, c-format
msgid "cannot install literal %s: %s"
msgstr "無法安裝常值 %s：%s"

#: src/symbols.c:918
#, c-format
msgid "cannot install constant %s: %s"
msgstr "無法安裝常數 %s：%s"

#: src/symbols.c:990
#, c-format
msgid "cannot install pragma %s: %s"
msgstr "無法安裝 pragma %s：%s"

#: src/symbols.c:995
#, c-format
msgid "INTERNAL ERROR: pragma %s already defined"
msgstr "內部錯誤：pragma %s 已定義"

#: pmult/pmult.c:156
#, c-format
msgid "cannot append body chunk: %s"
msgstr "無法附加主體區塊：%s"

#: pmult/pmult.c:261
#, c-format
msgid "cannot get the value of {%s}: %s"
msgstr "無法取得 {%s} 的值：%s"

#: pmult/pmult.c:298
#, c-format
msgid "client type %s is not supported yet"
msgstr "用戶端類型 %s 尚未支援"

#: pmult/pmult.c:301
#, c-format
msgid "unknown client type %s"
msgstr "不明的用戶端類型 %s"

#: pmult/pmult.c:386
#, c-format
msgid "invalid log level: %s"
msgstr "無效的記錄等級：%s"

#: pmult/pmult.c:417
msgid "Set remote milter type. Only `milter' is understood so far."
msgstr "設定遠端 milter 類型。目前只支援 'milter'。"

#. TRANSLATORS: 'milter' and 'pmilter' are keywords, do not translate
#. them.
#: pmult/pmult.c:420
msgid "arg: milter [version: number]|pmilter"
msgstr "arg: milter [version: number]|pmilter"

#: pmult/pmult.c:422
msgid "Set remote client URL."
msgstr "設定遠端用戶端 URL。"

#: pmult/pmult.c:424
msgid "Set write timeout."
msgstr "設定寫入逾時。"

#: pmult/pmult.c:427
msgid "Set read timeout."
msgstr "設定讀取逾時。"

#: pmult/pmult.c:430
msgid "Set timeout for EOM."
msgstr "設定 EOM 的逾時。"

#: pmult/pmult.c:433
msgid "Set connect timeout."
msgstr "設定連線逾時。"

#: pmult/pmult.c:436
msgid "Set log verbosity level. Arg is a list of items separated by commas or whitespace.  Each item is a log level optionally prefixed with `!' to indicate `any level except this', or '<', meaning `all levels up to and including this'.  Log levels in order of increasing priority are: proto, debug, info, warn, err, fatal."
msgstr "設定記錄詳細程度層級。參數為以逗號或空白分隔的項目清單。每個項目是一個記錄等級，可選擇性地加上 '!' 字首表示「除此等級以外的任何等級」，或 '<' 表示「到此等級為止的所有等級」。記錄等級由低到高依序為：proto、debug、info、warn、err、fatal。"

#: pmult/pmult.c:441
msgid "arg: list"
msgstr "arg: list"

#: pmult/pmult.c:513 pmult/pmult.c:1300
#, c-format
msgid "macro table %d is full, symbol {%s} ignored"
msgstr "巨集表格 %d 已滿，符號 {%s} 已忽略"

#: pmult/pmult.c:520
#, c-format
msgid "unknown MeTA1 macro %s"
msgstr "不明的 MeTA1 巨集 %s"

#: pmult/pmult.c:530 pmult/pmult.c:539
#, c-format
msgid "macro \"%s\" cannot be requested at this stage"
msgstr "巨集「%s」在此階段無法請求"

#: pmult/pmult.c:547
#, c-format
msgid "macro %s already defined"
msgstr "巨集 %s 已定義"

#: pmult/pmult.c:554 pmult/pmult.c:665 pmult/pmult.c:1320
#, c-format
msgid "INTERNAL ERROR at %s:%d"
msgstr "內部錯誤於 %s:%d"

#: pmult/pmult.c:571
msgid "unknown SMTP stage"
msgstr "不明的 SMTP 階段"

#: pmult/pmult.c:615
msgid "not enough arguments to define-macros"
msgstr "define-macros 的引數不足"

#: pmult/pmult.c:620
msgid "too many arguments to define-macros"
msgstr "define-macros 的引數過多"

#: pmult/pmult.c:653
msgid "too many macros defined for stage \"mail\", while processing \"auth-macros\" statement"
msgstr "為 \"mail\" 階段定義了過多巨集，在處理 \"auth-macros\" 陳述時"

#: pmult/pmult.c:676
msgid "Listen for milter requests on the given URL."
msgstr "在指定的 URL 上監聽 milter 請求。"

#: pmult/pmult.c:679
msgid "Maximum number of threads (soft limit)."
msgstr "執行緒最大數量（軟性限制）。"

#: pmult/pmult.c:681
msgid "Maximum number of threads (hard limit)."
msgstr "執行緒最大數量（硬性限制）。"

#: pmult/pmult.c:683
msgid "Maximum number of file descriptors pmilter is allowed to open"
msgstr "pmilter 允許開啟的最大檔案描述符數量"

#: pmult/pmult.c:686
msgid "Set pmilter debug verbosity level."
msgstr "設定 pmilter 的除錯詳細程度層級。"

#: pmult/pmult.c:688
msgid "Write PID to this file."
msgstr "將 PID 寫入此檔案。"

#: pmult/pmult.c:690
msgid "Pass auth macros to MAIL handler."
msgstr "將 auth 巨集傳遞給 MAIL 處理程式。"

#: pmult/pmult.c:692
msgid "Define macros for the given SMTP stage."
msgstr "為指定的 SMTP 階段定義巨集。"

#: pmult/pmult.c:693
msgid "stage: string> <macros: strings"
msgstr "stage: string> <macros: strings"

#: pmult/pmult.c:699
msgid ""
"Set Mailfromd debug verbosity level.  Argument is a comma-separated list of debug specifications, each of which has the following form:\n"
"  <module: string>[=<level: number>]\n"
"where <module> is the name of a Mailfromd module, and <level> is the desired verbosity level for that module."
msgstr ""
"設定 Mailfromd 的除錯詳細程度層級。參數是以逗號分隔的除錯規格清單，每個規格格式如下：\n"
"  <module: string>[=<level: number>]\n"
"其中 <module> 是 Mailfromd 模組名稱，<level> 是該模組所需的詳細程度層級。"

#: pmult/pmult.c:708 pmult/pmult.c:711 pmult/pmult.c:714 pmult/pmult.c:717
#: pmult/pmult.c:720
msgid "Ignored for compatibility with mailfromd"
msgstr "為與 mailfromd 相容而忽略"

#: pmult/pmult.c:709
msgid "type: string"
msgstr "type: string"

#: pmult/pmult.c:718
msgid "arg: number"
msgstr "arg: number"

#: pmult/pmult.c:798
msgid "ident"
msgstr "ident"

#: pmult/pmult.c:805
msgid "pmilter multiplexer"
msgstr "pmilter 多工器"

#: pmult/pmult.c:822
msgid "URL"
msgstr "URL"

#: pmult/pmult.c:823
msgid "listen on the given URL"
msgstr "在指定的 URL 上監聽"

#: pmult/pmult.c:835
msgid "set debug verbosity level"
msgstr "設定除錯詳細程度層級"

#: pmult/pmult.c:839
msgid "disable signal handling in the main thread (use for debugging)."
msgstr "在主執行緒中停用訊號處理（用於除錯）。"

#: pmult/pmult.c:1107
#, c-format
msgid "unsupported reply code: %c (%d)"
msgstr "不支援的回應碼：%c (%d)"

#: pmult/pmult.c:1110
#, c-format
msgid "unsupported reply code: (%d)"
msgstr "不支援的回應碼：(%d)"

#: pmult/pmult.c:1308
#, c-format
msgid "Sendmail macro {%s} does not translate to a MeTA1 one"
msgstr "Sendmail 巨集 {%s} 無法轉換為 MeTA1 巨集"

#: pmult/pmult.c:1353
#, c-format
msgid "failed to connect to %s (milter %s)"
msgstr "連線到 %s 失敗（milter %s）"

#: pmult/pmult.c:1356
#, c-format
msgid "failed to connect to %s"
msgstr "連線到 %s 失敗"

#: pmult/pmult.c:1471
#, c-format
msgid "%sfailed to connect to %s (milter %s)"
msgstr "%s連線到 %s 失敗（milter %s）"

#: pmult/pmult.c:2027
#, c-format
msgid "%scannot get the size of the header stream: %s"
msgstr "%s無法取得標頭串流的大小：%s"

#: pmult/pmult.c:2035
#, c-format
msgid "%scannot create header: %s"
msgstr "%s無法建立標頭：%s"

#: pmult/pmult.c:2164
#, c-format
msgid "reading from header stream failed: %s"
msgstr "從標頭串流讀取失敗：%s"

#: pmult/pmult.c:2214
#, c-format
msgid "got signal %d"
msgstr "收到訊號 %d"

#: pmult/pmult.c:2248
#, c-format
msgid "%s starting"
msgstr "%s 啟動中"

#: pmult/pmult.c:2250
#, c-format
msgid "%s terminated"
msgstr "%s 已終止"

#: pmult/pmult.c:2270
#, c-format
msgid "failed to set up signals: %s"
msgstr "設定訊號失敗：%s"

#: pmult/pmult.c:2333
msgid "URL to listen on was not specified"
msgstr "未指定要監聽的 URL"

#: pmult/pmult.c:2339
msgid "no clients configured"
msgstr "未設定用戶端"

#: pmult/pmult.c:2347
#, c-format
msgid "version mismatch: compile_time=%d, run_time=%d"
msgstr "版本不相容：compile_time=%d, run_time=%d"

#: pmult/pmult.c:2387
#, c-format
msgid "cannot create PID file `%s': %s"
msgstr "無法建立 PID 檔案「%s」：%s"

#: pmult/pmult.c:2398
#, c-format
msgid "cannot create main thread: %s"
msgstr "無法建立主執行緒：%s"