# Danish translation dos2unix-man
# Copyright (C) 2017 Erwin Waterlander (msgids)
# This file is distributed under the same license as the dos2unix package.
# Joe Hansen <joedalton2@yahoo.dk>, 2016, 2017.
#
# code page -> tegnkodningstabel
#
msgid ""
msgstr ""
"Project-Id-Version: dos2unix-man-7.3.5-beta4\n"
"POT-Creation-Date: 2017-06-20 22:06+0200\n"
"PO-Revision-Date: 2017-05-21 12:07+0100\n"
"Last-Translator: Joe Hansen <joedalton2@yahoo.dk>\n"
"Language-Team: Danish <dansk@dansk-gruppen.dk>\n"
"Language: da\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Bugs: Report translation errors to the Language-Team address.\n"

#. type: =head1
#: dos2unix.pod:52
msgid "NAME"
msgstr "NAVN"

#. type: textblock
#: dos2unix.pod:54
msgid "dos2unix - DOS/Mac to Unix and vice versa text file format converter"
msgstr "dos2unix - omdannelsesprogram til tekstfiler fra DOS/mac til Unix og omvendt"

#. type: =head1
#: dos2unix.pod:56
msgid "SYNOPSIS"
msgstr "SYNOPSIS"

#. type: verbatim
#: dos2unix.pod:58
#, no-wrap
msgid ""
"    dos2unix [options] [FILE ...] [-n INFILE OUTFILE ...]\n"
"    unix2dos [options] [FILE ...] [-n INFILE OUTFILE ...]\n"
"\n"
msgstr ""
"    dos2unix [tilvalg] [FIL ...] [-n INDFIL UDFIL ...]\n"
"    unix2dos [tilvalg] [FIL ...] [-n INDFIL UDFIL ...]\n"
"\n"

#. type: =head1
#: dos2unix.pod:61
msgid "DESCRIPTION"
msgstr "BESKRIVELSE"

#. type: textblock
#: dos2unix.pod:63
msgid "The Dos2unix package includes utilities C<dos2unix> and C<unix2dos> to convert plain text files in DOS or Mac format to Unix format and vice versa."
msgstr "Pakken Dos2unix indeholder redskaberne C<dos2unix> og C<unix2dos> til at omdanne rene tekstfiler i DOS- eller Mac-format til Unixformat og omvendt."

#. type: textblock
#: dos2unix.pod:66
msgid "In DOS/Windows text files a line break, also known as newline, is a combination of two characters: a Carriage Return (CR) followed by a Line Feed (LF). In Unix text files a line break is a single character: the Line Feed (LF). In Mac text files, prior to Mac OS X, a line break was single Carriage Return (CR)  character. Nowadays Mac OS uses Unix style (LF) line breaks."
msgstr "I DOS/Windows-tekstfiler er et linjeskift, også kendt som nylinje (newline), en kombination af to tegn: et Carriage Return (CR) fulgt af en Line Feed (LF). I Unix-tekstfiler er et linjeskift et enkelt tegn: Line Feed (LF). I Mac-tekstfiler, før Mac OS X, var et linjeskift et enkelt Carriage Return-tegn (CR). I dag bruger Mac OS linjeskift i Unixstil (LF)."

#. type: textblock
#: dos2unix.pod:72
msgid "Besides line breaks Dos2unix can also convert the encoding of files. A few DOS code pages can be converted to Unix Latin-1. And Windows Unicode (UTF-16)  files can be converted to Unix Unicode (UTF-8) files."
msgstr "Udover linjeskift kan Dos2unix omdanne filkodningen. Nogle få DOS-tegnkodningstabeller kan omdannes til Unix Latin-1. Og Windows Unicode-filer (UTF-16) kan omdannes til Unix Unicode-filer (UTF-8)."

#. type: textblock
#: dos2unix.pod:76
msgid "Binary files are automatically skipped, unless conversion is forced."
msgstr "Binære filer udelades automatisk, med mindre omdannelse er tvungen."

#. type: textblock
#: dos2unix.pod:78
msgid "Non-regular files, such as directories and FIFOs, are automatically skipped."
msgstr "Ikke gængse filer, såsom mapper og FIFO'er, udelades automatisk."

#. type: textblock
#: dos2unix.pod:80
msgid "Symbolic links and their targets are by default kept untouched.  Symbolic links can optionally be replaced, or the output can be written to the symbolic link target.  Writing to a symbolic link target is not supported on Windows."
msgstr "Symbolske henvisninger og deres mål bevares som standard urørte. Symbolske henvisninger kan valgfrit erstattes, eller uddata kan skrives til det symbolske henvisningsmål. Skrivning til et symbolsk henvisningsmål er ikke understøttet på Windows."

#. type: textblock
#: dos2unix.pod:84
msgid "Dos2unix was modelled after dos2unix under SunOS/Solaris.  There is one important difference with the original SunOS/Solaris version. This version does by default in-place conversion (old file mode), while the original SunOS/Solaris version only supports paired conversion (new file mode). See also options C<-o> and C<-n>. Another difference is that the SunOS/Solaris version uses by default I<iso> mode conversion while this version uses by default I<ascii> mode conversion."
msgstr "Dos2unix blev opbygget efter dos2unix under SunOS/Solaris. Der er en vigtig forskel til den oprindelige SunOS/Solaris-version. Denne version udfører som standard omdannelse med det samme (gammel filtilstand), mens den oprindelige SunOS/Solaris-version kun understøtter parret omdannelse (ny filtilstand). Se også tilvalgene C<-o> og C<-n>. En anden forskel er at SunOS/Solaris-versionen som standard bruger I<iso>-tilstandsomdannelse mens denne version som standard bruger I<ascii>-tilstandsomdannelse."

#. type: =head1
#: dos2unix.pod:92
msgid "OPTIONS"
msgstr "TILVALG"

#. type: =item
#: dos2unix.pod:96
msgid "B<-->"
msgstr "B<-->"

#. type: textblock
#: dos2unix.pod:98
msgid "Treat all following options as file names. Use this option if you want to convert files whose names start with a dash. For instance to convert a file named \"-foo\", you can use this command:"
msgstr "Opfat alle de følgende tilvalg som filnavne. Brug dette tilvalg hvis du ønsker at omdanne filer hvis navn starter med en bindestreg. For at omdanne en fil navngivet »-foo« kan du bruge kommandoen:"

#. type: verbatim
#: dos2unix.pod:102
#, no-wrap
msgid ""
"    dos2unix -- -foo\n"
"\n"
msgstr ""
"    dos2unix -- -foo\n"
"\n"

#. type: textblock
#: dos2unix.pod:104
msgid "Or in new file mode:"
msgstr "Eller i ny filtilstand:"

#. type: verbatim
#: dos2unix.pod:106
#, no-wrap
msgid ""
"    dos2unix -n -- -foo out.txt\n"
"\n"
msgstr ""
"    dos2unix -n -- -foo out.txt\n"
"\n"

#. type: =item
#: dos2unix.pod:108
msgid "B<-ascii>"
msgstr "B<-ascii>"

#. type: textblock
#: dos2unix.pod:110
msgid "Convert only line breaks. This is the default conversion mode."
msgstr "Omdanner kun linjeskift. Dette er standarden."

#. type: =item
#: dos2unix.pod:112
msgid "B<-iso>"
msgstr "B<-iso>"

#. type: textblock
#: dos2unix.pod:114
msgid "Conversion between DOS and ISO-8859-1 character set. See also section CONVERSION MODES."
msgstr "Omdannelse mellem DOS- og ISO-8859-1-tegnsæt. Se også afsnittet OMDANNELSESTILSTANDE."

#. type: =item
#: dos2unix.pod:117
msgid "B<-1252>"
msgstr "B<-1252>"

#. type: textblock
#: dos2unix.pod:119
msgid "Use Windows code page 1252 (Western European)."
msgstr "Brug Windows tegnkodningstabel 1252 (vesteuropæisk)."

#. type: =item
#: dos2unix.pod:121
msgid "B<-437>"
msgstr "B<-437>"

#. type: textblock
#: dos2unix.pod:123
msgid "Use DOS code page 437 (US). This is the default code page used for ISO conversion."
msgstr "Bruger DOS-tegnkodningstabel 437 (US). Dette er standarden brugt for ISO-omdannelse."

#. type: =item
#: dos2unix.pod:125
msgid "B<-850>"
msgstr "B<-850>"

#. type: textblock
#: dos2unix.pod:127
msgid "Use DOS code page 850 (Western European)."
msgstr "Brug DOS-tegnkodningstabel 850 (vesteuropæisk)."

#. type: =item
#: dos2unix.pod:129
msgid "B<-860>"
msgstr "B<-860>"

#. type: textblock
#: dos2unix.pod:131
msgid "Use DOS code page 860 (Portuguese)."
msgstr "Brug DOS-tegnkodningstabel 860 (portugisisk)."

#. type: =item
#: dos2unix.pod:133
msgid "B<-863>"
msgstr "B<-863>"

#. type: textblock
#: dos2unix.pod:135
msgid "Use DOS code page 863 (French Canadian)."
msgstr "Brug DOS-tegnkodningstabel 863 (fransk-canadisk)."

#. type: =item
#: dos2unix.pod:137
msgid "B<-865>"
msgstr "B<-865>"

#. type: textblock
#: dos2unix.pod:139
msgid "Use DOS code page 865 (Nordic)."
msgstr "Brug DOS-tegnkodningstabel 865 (nordisk)."

#. type: =item
#: dos2unix.pod:141
msgid "B<-7>"
msgstr "B<-7>"

#. type: textblock
#: dos2unix.pod:143
msgid "Convert 8 bit characters to 7 bit space."
msgstr "Omdanner 8-bit tegn til 7-bit mellemrum."

#. type: =item
#: dos2unix.pod:145
msgid "B<-b, --keep-bom>"
msgstr "B<-b, --keep-bom>"

#. type: textblock
#: dos2unix.pod:147
msgid "Keep Byte Order Mark (BOM). When the input file has a BOM, write a BOM in the output file. This is the default behavior when converting to DOS line breaks. See also option C<-r>."
msgstr "Bevar Byte Order Mark (BOM). Når en inddatafil har en BOM så skriv en BOM i uddatafilen. Dette er standardopførslen under omdannelse til DOS-linjeskift. Se også tilvalget C<-r>-"

#. type: =item
#: dos2unix.pod:151
msgid "B<-c, --convmode CONVMODE>"
msgstr "B<-c, --convmode KONV-TILSTAND>"

#. type: textblock
#: dos2unix.pod:153
msgid "Set conversion mode. Where CONVMODE is one of: I<ascii>, I<7bit>, I<iso>, I<mac> with ascii being the default."
msgstr "Angiv omdannelsestilstand. Hvor KONV-TILSTAND er en af: I<ascii>, I<7bit>, I<iso>, I<mac> med ascii som værende standarden."

#. type: =item
#: dos2unix.pod:157
msgid "B<-D, --display-enc ENCODING>"
msgstr "B<-D, --display-enc KODNING>"

#. type: textblock
#: dos2unix.pod:159
msgid "Set encoding of displayed text. Where ENCODING is one of: I<ansi>, I<unicode>, I<unicodebom>, I<utf8>, I<utf8bom> with ansi being the default."
msgstr "Angiv kodning for vist tekst. Hvor KODNING er en af: I<ansi>, I<unicode>, I<unicodebom>, I<utf8>, I<utf8bom> med ansi som værende standarden."

#. type: textblock
#: dos2unix.pod:163
msgid "This option is only available in dos2unix for Windows with Unicode file name support. This option has no effect on the actual file names read and written, only on how they are displayed."
msgstr "Dette tilvalg er kun tilgængeligt i dos2unix for Windows med Unicode-understøttelse for filnavnet. Dette tilvalg har ingen effekt på de faktiske læste og skrevne filnavne, kun hvordan de vises."

#. type: textblock
#: dos2unix.pod:167
msgid "There are several methods for displaying text in a Windows console based on the encoding of the text. They all have their own advantages and disadvantages."
msgstr "Der er flere metoder for visning af tekst i Windowskonsollen baseret på tekstkodningen. De har alle deres egne fordele og ulemper."

#. type: =item
#: dos2unix.pod:173
msgid "B<ansi>"
msgstr "B<ansi>"

#. type: textblock
#: dos2unix.pod:175
msgid "Dos2unix's default method is to use ANSI encoded text. The advantage is that it is backwards compatible. It works with raster and TrueType fonts. In some regions you may need to change the active DOS OEM code page to the Windows system ANSI code page using the C<chcp> command, because dos2unix uses the Windows system code page."
msgstr "Dos2unix' standardmetode er at anvende ANSI-kodet tekst. Fordelen er at den er baglæns kompatibel. Den fungerer med raster- og TrueType-skrifttyper. I nogle områder skal du måske ændre den aktive DOE OEM-tegnkodningstabel til Windowssystemets ANSI-tegnkodningstabel via kommandoen C<chcp>, da dos2unix bruger Windowssystemets tegnkodningstabel."

#. type: textblock
#: dos2unix.pod:181
msgid "The disadvantage of ansi is that international file names with characters not inside the system default code page are not displayed properly. You will see a question mark, or a wrong symbol instead. When you don't work with foreign file names this method is OK."
msgstr "Ulempen ved ansi er at interne filnavne med tegn uden for systemets tegnkodetabel ikke vises korrekt. Du vil se et spørgsmåltegn, eller et forkert symbol i stedet for. Når du ikke arbejder med fremmede filnavne er denne metode o.k."

#. type: =item
#: dos2unix.pod:186
msgid "B<unicode, unicodebom>"
msgstr "B<unicode, unicodebom>"

#. type: textblock
#: dos2unix.pod:188
msgid "The advantage of unicode (the Windows name for UTF-16) encoding is that text is usually properly displayed. There is no need to change the active code page.  You may need to set the console's font to a TrueType font to have international characters displayed properly. When a character is not included in the TrueType font you usually see a small square, sometimes with a question mark in it."
msgstr "Fordelen ved unicodekodningen (Windowsnavnet for UTF-16) er at tekst normalt vises korrekt. Der er intet behov for at ændre den aktive tegnkodningstabel. Du skal måske angive konsollens skrifttype til en TrueType-skrifttype for at internationale tegn vises korrekt. Når et tegn ikke er inkluderet i TrueType-skrifttypen, så ser du normalt en lille firkant, nogle gange med et spørgsmåltegn inden i."

#. type: textblock
#: dos2unix.pod:194
msgid "When you use the ConEmu console all text is displayed properly, because ConEmu automatically selects a good font."
msgstr "Når du bruger ConEmu-konsollen så vises al tekst korrekt, da ConEmu automatisk vælger en god skrifttype."

#. type: textblock
#: dos2unix.pod:197
msgid "The disadvantage of unicode is that it is not compatible with ASCII. The output is not easy to handle when you redirect it to another program."
msgstr "Ulempen ved unicode er at den ikke er kompatibel med ASCII. Uddata er ikke nemt at håndtere, når du sender det videre til et andet program."

#. type: textblock
#: dos2unix.pod:200
msgid "When method C<unicodebom> is used the Unicode text will be preceded with a BOM (Byte Order Mark). A BOM is required for correct redirection or piping in PowerShell."
msgstr "Når metoden C<unicodebom> bruges så vil Unicodeteksten blive foranstillet med en BOM (Byte Order Mark). En BOM er krævet for korrekt viderestilling eller opsætning af datakanal i PowerShell."

#. type: =item
#: dos2unix.pod:205
msgid "B<utf8, utf8bom>"
msgstr "B<utf8, utf8bom>"

#. type: textblock
#: dos2unix.pod:207
msgid "The advantage of utf8 is that it is compatible with ASCII. You need to set the console's font to a TrueType font. With a TrueType font the text is displayed similar as with the C<unicode> encoding."
msgstr ""

#. type: textblock
#: dos2unix.pod:211
msgid "The disadvantage is that when you use the default raster font all non-ASCII characters are displayed wrong. Not only unicode file names, but also translated messages become unreadable. On Windows configured for an East-Asian region you may see a lot of flickering of the console when the messages are displayed."
msgstr ""

#. type: textblock
#: dos2unix.pod:217
msgid "In a ConEmu console the utf8 encoding method works well."
msgstr ""

#. type: textblock
#: dos2unix.pod:219
msgid "When method C<utf8bom> is used the UTF-8 text will be preceded with a BOM (Byte Order Mark). A BOM is required for correct redirection or piping in PowerShell."
msgstr ""

#. type: textblock
#: dos2unix.pod:226
msgid "The default encoding can be changed with environment variable DOS2UNIX_DISPLAY_ENC by setting it to C<unicode>, C<unicodebom>, C<utf8>, or C<utf8bom>."
msgstr ""

#. type: =item
#: dos2unix.pod:229
msgid "B<-f, --force>"
msgstr "B<-f, --force>"

#. type: textblock
#: dos2unix.pod:231
msgid "Force conversion of binary files."
msgstr "Fremtving omdannelse af binære filer."

#. type: =item
#: dos2unix.pod:233
msgid "B<-gb, --gb18030>"
msgstr ""

#. type: textblock
#: dos2unix.pod:235
msgid "On Windows UTF-16 files are by default converted to UTF-8, regardless of the locale setting. Use this option to convert UTF-16 files to GB18030. This option is only available on Windows. See also section GB18030."
msgstr ""

#. type: =item
#: dos2unix.pod:239
msgid "B<-h, --help>"
msgstr "B<-h, --help>"

#. type: textblock
#: dos2unix.pod:241
msgid "Display help and exit."
msgstr "Vis hjælpeteksten og afslut."

#. type: =item
#: dos2unix.pod:243
msgid "B<-i[FLAGS], --info[=FLAGS] FILE ...>"
msgstr "B<-i[FLAG], --info[=FLAG] FIL ...>"

#. type: textblock
#: dos2unix.pod:245
msgid "Display file information. No conversion is done."
msgstr "Vis filinformation. Ingen omdannelse udføres."

#. type: textblock
#: dos2unix.pod:247
msgid "The following information is printed, in this order: number of DOS line breaks, number of Unix line breaks, number of Mac line breaks, byte order mark, text or binary, file name."
msgstr ""

#. type: textblock
#: dos2unix.pod:251
msgid "Example output:"
msgstr "Resultateksempel:"

#. type: verbatim
#: dos2unix.pod:253
#, no-wrap
msgid ""
"     6       0       0  no_bom    text    dos.txt\n"
"     0       6       0  no_bom    text    unix.txt\n"
"     0       0       6  no_bom    text    mac.txt\n"
"     6       6       6  no_bom    text    mixed.txt\n"
"    50       0       0  UTF-16LE  text    utf16le.txt\n"
"     0      50       0  no_bom    text    utf8unix.txt\n"
"    50       0       0  UTF-8     text    utf8dos.txt\n"
"     2     418     219  no_bom    binary  dos2unix.exe\n"
"\n"
msgstr ""
"     6       0       0  no_bom    text    dos.txt\n"
"     0       6       0  no_bom    text    unix.txt\n"
"     0       0       6  no_bom    text    mac.txt\n"
"     6       6       6  no_bom    text    mixed.txt\n"
"    50       0       0  UTF-16LE  text    utf16le.txt\n"
"     0      50       0  no_bom    text    utf8unix.txt\n"
"    50       0       0  UTF-8     text    utf8dos.txt\n"
"     2     418     219  no_bom    binary  dos2unix.exe\n"
"\n"

#. type: textblock
#: dos2unix.pod:262
msgid "Note that sometimes a binary file can be mistaken for a text file. See also option C<-s>."
msgstr ""

#. type: textblock
#: dos2unix.pod:264
msgid "Optionally extra flags can be set to change the output. One or more flags can be added."
msgstr ""

#. type: =item
#: dos2unix.pod:269
msgid "B<0>"
msgstr ""

#. type: textblock
#: dos2unix.pod:271
msgid "Print the file information lines followed by a null character instead of a newline character. This enables correct interpretation of file names with spaces or quotes when flag c is used. Use this flag in combination with xargs(1) option C<-0> or C<--null>."
msgstr ""

#. type: =item
#: dos2unix.pod:276
msgid "B<d>"
msgstr "B<d>"

#. type: textblock
#: dos2unix.pod:278
msgid "Print number of DOS line breaks."
msgstr "Udskriv antallet af DOS-linjeskift."

#. type: =item
#: dos2unix.pod:280
msgid "B<u>"
msgstr "B<u>"

#. type: textblock
#: dos2unix.pod:282
msgid "Print number of Unix line breaks."
msgstr "Udskriv antallet af Unix-linjeskift."

#. type: =item
#: dos2unix.pod:284
msgid "B<m>"
msgstr "B<m>"

#. type: textblock
#: dos2unix.pod:286
msgid "Print number of Mac line breaks."
msgstr "Udskriv antallet af Mac-linjeskift."

#. type: =item
#: dos2unix.pod:288
msgid "B<b>"
msgstr "B<b>"

#. type: textblock
#: dos2unix.pod:290
msgid "Print the byte order mark."
msgstr "Udskriv byte-rækkefølge-markering (BOM)."

#. type: =item
#: dos2unix.pod:292
msgid "B<t>"
msgstr "B<t>"

#. type: textblock
#: dos2unix.pod:294
msgid "Print if file is text or binary."
msgstr "Udskriv om filen er tekst binær."

#. type: =item
#: dos2unix.pod:296
msgid "B<c>"
msgstr "B<c>"

#. type: textblock
#: dos2unix.pod:298
msgid "Print only the files that would be converted."
msgstr "Udskriv kun filerne som bliver omdannet."

#. type: textblock
#: dos2unix.pod:300
msgid "With the C<c> flag dos2unix will print only the files that contain DOS line breaks, unix2dos will print only file names that have Unix line breaks."
msgstr ""

#. type: =item
#: dos2unix.pod:303
msgid "B<h>"
msgstr "B<h>"

#. type: textblock
#: dos2unix.pod:305
msgid "Print a header."
msgstr "Udskriv et teksthoved."

#. type: =item
#: dos2unix.pod:307
msgid "B<p>"
msgstr "B<p>"

#. type: textblock
#: dos2unix.pod:309
msgid "Show file names without path."
msgstr "Vis filnavne uden sti."

#. type: textblock
#: dos2unix.pod:313
msgid "Examples:"
msgstr "Eksempler:"

#. type: textblock
#: dos2unix.pod:315
msgid "Show information for all *.txt files:"
msgstr "Vis information for alle *.txt-filer:"

#. type: verbatim
#: dos2unix.pod:317
#, no-wrap
msgid ""
"    dos2unix -i *.txt\n"
"\n"
msgstr ""
"    dos2unix -i *.txt\n"
"\n"

#. type: textblock
#: dos2unix.pod:319
msgid "Show only the number of DOS line breaks and Unix line breaks:"
msgstr "Vis kun antallet af DOS-linjeskift og Unix-linjeskift:"

#. type: verbatim
#: dos2unix.pod:321
#, no-wrap
msgid ""
"    dos2unix -idu *.txt\n"
"\n"
msgstr ""
"    dos2unix -idu *.txt\n"
"\n"

#. type: textblock
#: dos2unix.pod:323
msgid "Show only the byte order mark:"
msgstr "Vis kun byte-rækkefølge-markering (BOM):"

#. type: verbatim
#: dos2unix.pod:325
#, no-wrap
msgid ""
"    dos2unix --info=b *.txt\n"
"\n"
msgstr ""
"    dos2unix --info=b *.txt\n"
"\n"

#. type: textblock
#: dos2unix.pod:327
msgid "List the files that have DOS line breaks:"
msgstr "Vis filerne som har DOS-linjeskift"

#. type: verbatim
#: dos2unix.pod:329
#, no-wrap
msgid ""
"    dos2unix -ic *.txt\n"
"\n"
msgstr ""
"    dos2unix -ic *.txt\n"
"\n"

#. type: textblock
#: dos2unix.pod:331
msgid "List the files that have Unix line breaks:"
msgstr "Vis filerne som har Unix-linjeskift:"

#. type: verbatim
#: dos2unix.pod:333
#, no-wrap
msgid ""
"    unix2dos -ic *.txt\n"
"\n"
msgstr ""
"    unix2dos -ic *.txt\n"
"\n"

#. type: textblock
#: dos2unix.pod:335
msgid "Convert only files that have DOS line breaks and leave the other files untouched:"
msgstr "Omdan kun filer som har DOS-linjeskift og efterlad de andre filer urørte:"

#. type: verbatim
#: dos2unix.pod:337
#, fuzzy, no-wrap
#| msgid ""
#| "    dos2unix -ic *.txt | xargs dos2unix\n"
#| "\n"
msgid ""
"    dos2unix -ic0 *.txt | xargs -0 dos2unix\n"
"\n"
msgstr ""
"    dos2unix -ic *.txt | xargs dos2unix\n"
"\n"

#. type: textblock
#: dos2unix.pod:339
msgid "Find text files that have DOS line breaks:"
msgstr "Find tekstfiler som har DOS-linjeskift:"

#. type: verbatim
#: dos2unix.pod:341
#, fuzzy, no-wrap
#| msgid ""
#| "    find -name '*.txt' | xargs dos2unix -ic\n"
#| "\n"
msgid ""
"    find -name '*.txt' -print0 | xargs -0 dos2unix -ic\n"
"\n"
msgstr ""
"    find -name '*.txt' | xargs dos2unix -ic\n"
"\n"

#. type: =item
#: dos2unix.pod:343
msgid "B<-k, --keepdate>"
msgstr "B<-k, --keepdate>"

#. type: textblock
#: dos2unix.pod:345
msgid "Keep the date stamp of output file same as input file."
msgstr "Bevar datostempel for uddatafilen svarende til inddatafilen."

#. type: =item
#: dos2unix.pod:347
msgid "B<-L, --license>"
msgstr "B<-L, --license>"

#. type: textblock
#: dos2unix.pod:349
msgid "Display program's license."
msgstr "Vis programs licens."

#. type: =item
#: dos2unix.pod:351
msgid "B<-l, --newline>"
msgstr "B<-l, --newline>"

#. type: textblock
#: dos2unix.pod:353
msgid "Add additional newline."
msgstr "Tilføj yderlig nylinje."

#. type: textblock
#: dos2unix.pod:355
msgid "B<dos2unix>: Only DOS line breaks are changed to two Unix line breaks.  In Mac mode only Mac line breaks are changed to two Unix line breaks."
msgstr ""

#. type: textblock
#: dos2unix.pod:359
msgid "B<unix2dos>: Only Unix line breaks are changed to two DOS line breaks.  In Mac mode Unix line breaks are changed to two Mac line breaks."
msgstr ""

#. type: =item
#: dos2unix.pod:362
msgid "B<-m, --add-bom>"
msgstr "B<-m, --add-bom>"

#. type: textblock
#: dos2unix.pod:364
msgid "Write a Byte Order Mark (BOM) in the output file. By default an UTF-8 BOM is written."
msgstr ""

#. type: textblock
#: dos2unix.pod:367
msgid "When the input file is UTF-16, and the option C<-u> is used, an UTF-16 BOM will be written."
msgstr ""

#. type: textblock
#: dos2unix.pod:370
msgid "Never use this option when the output encoding is other than UTF-8, UTF-16, or GB18030. See also section UNICODE."
msgstr ""

#. type: =item
#: dos2unix.pod:374
msgid "B<-n, --newfile INFILE OUTFILE ...>"
msgstr ""

#. type: textblock
#: dos2unix.pod:376
msgid "New file mode. Convert file INFILE and write output to file OUTFILE.  File names must be given in pairs and wildcard names should I<not> be used or you I<will> lose your files."
msgstr ""

#. type: textblock
#: dos2unix.pod:380
msgid "The person who starts the conversion in new file (paired) mode will be the owner of the converted file. The read/write permissions of the new file will be the permissions of the original file minus the umask(1) of the person who runs the conversion."
msgstr ""

#. type: =item
#: dos2unix.pod:385
msgid "B<-o, --oldfile FILE ...>"
msgstr ""

#. type: textblock
#: dos2unix.pod:387
msgid "Old file mode. Convert file FILE and overwrite output to it. The program defaults to run in this mode. Wildcard names may be used."
msgstr ""

#. type: textblock
#: dos2unix.pod:390
msgid "In old file (in-place) mode the converted file gets the same owner, group, and read/write permissions as the original file. Also when the file is converted by another user who has write permissions on the file (e.g. user root).  The conversion will be aborted when it is not possible to preserve the original values.  Change of owner could mean that the original owner is not able to read the file any more. Change of group could be a security risk, the file could be made readable for persons for whom it is not intended.  Preservation of owner, group, and read/write permissions is only supported on Unix."
msgstr ""

#. type: =item
#: dos2unix.pod:399
msgid "B<-q, --quiet>"
msgstr ""

#. type: textblock
#: dos2unix.pod:401
msgid "Quiet mode. Suppress all warnings and messages. The return value is zero.  Except when wrong command-line options are used."
msgstr ""

#. type: =item
#: dos2unix.pod:404
msgid "B<-r, --remove-bom>"
msgstr ""

#. type: textblock
#: dos2unix.pod:406
msgid "Remove Byte Order Mark (BOM). Do not write a BOM in the output file.  This is the default behavior when converting to Unix line breaks.  See also option C<-b>."
msgstr ""

#. type: =item
#: dos2unix.pod:410
msgid "B<-s, --safe>"
msgstr "B<-s, --safe>"

#. type: textblock
#: dos2unix.pod:412
msgid "Skip binary files (default)."
msgstr ""

#. type: textblock
#: dos2unix.pod:414
msgid "The skipping of binary files is done to avoid accidental mistakes. Be aware that the detection of binary files is not 100% foolproof. Input files are scanned for binary symbols which are typically not found in text files. It is possible that a binary file contains only normal text characters. Such a binary file will mistakenly be seen as a text file."
msgstr ""

#. type: =item
#: dos2unix.pod:420
msgid "B<-u, --keep-utf16>"
msgstr ""

#. type: textblock
#: dos2unix.pod:422
msgid "Keep the original UTF-16 encoding of the input file. The output file will be written in the same UTF-16 encoding, little or big endian, as the input file.  This prevents transformation to UTF-8. An UTF-16 BOM will be written accordingly. This option can be disabled with the C<-ascii> option."
msgstr ""

#. type: =item
#: dos2unix.pod:427
msgid "B<-ul, --assume-utf16le>"
msgstr ""

#. type: textblock
#: dos2unix.pod:429
msgid "Assume that the input file format is UTF-16LE."
msgstr ""

#. type: textblock
#: dos2unix.pod:431
msgid "When there is a Byte Order Mark in the input file the BOM has priority over this option."
msgstr ""

#. type: textblock
#: dos2unix.pod:434
msgid "When you made a wrong assumption (the input file was not in UTF-16LE format) and the conversion succeeded, you will get an UTF-8 output file with wrong text.  You can undo the wrong conversion with iconv(1) by converting the UTF-8 output file back to UTF-16LE. This will bring back the original file."
msgstr ""

#. type: textblock
#: dos2unix.pod:439
msgid "The assumption of UTF-16LE works as a I<conversion mode>. By switching to the default I<ascii> mode the UTF-16LE assumption is turned off."
msgstr ""

#. type: =item
#: dos2unix.pod:442
msgid "B<-ub, --assume-utf16be>"
msgstr ""

#. type: textblock
#: dos2unix.pod:444
msgid "Assume that the input file format is UTF-16BE."
msgstr ""

#. type: textblock
#: dos2unix.pod:446
msgid "This option works the same as option C<-ul>."
msgstr ""

#. type: =item
#: dos2unix.pod:448
msgid "B<-v, --verbose>"
msgstr ""

#. type: textblock
#: dos2unix.pod:450
msgid "Display verbose messages. Extra information is displayed about Byte Order Marks and the amount of converted line breaks."
msgstr ""

#. type: =item
#: dos2unix.pod:453
msgid "B<-F, --follow-symlink>"
msgstr ""

#. type: textblock
#: dos2unix.pod:455
msgid "Follow symbolic links and convert the targets."
msgstr ""

#. type: =item
#: dos2unix.pod:457
msgid "B<-R, --replace-symlink>"
msgstr ""

#. type: textblock
#: dos2unix.pod:459
msgid "Replace symbolic links with converted files (original target files remain unchanged)."
msgstr ""

#. type: =item
#: dos2unix.pod:462
msgid "B<-S, --skip-symlink>"
msgstr ""

#. type: textblock
#: dos2unix.pod:464
msgid "Keep symbolic links and targets unchanged (default)."
msgstr ""

#. type: =item
#: dos2unix.pod:466
msgid "B<-V, --version>"
msgstr ""

#. type: textblock
#: dos2unix.pod:468
msgid "Display version information and exit."
msgstr ""

#. type: =head1
#: dos2unix.pod:472
msgid "MAC MODE"
msgstr ""

#. type: textblock
#: dos2unix.pod:474
msgid "In normal mode line breaks are converted from DOS to Unix and vice versa.  Mac line breaks are not converted."
msgstr ""

#. type: textblock
#: dos2unix.pod:477
msgid "In Mac mode line breaks are converted from Mac to Unix and vice versa. DOS line breaks are not changed."
msgstr ""

#. type: textblock
#: dos2unix.pod:480
msgid "To run in Mac mode use the command-line option C<-c mac> or use the commands C<mac2unix> or C<unix2mac>."
msgstr ""

#. type: =head1
#: dos2unix.pod:483
msgid "CONVERSION MODES"
msgstr ""

#. type: =item
#: dos2unix.pod:487
msgid "B<ascii>"
msgstr ""

#. type: textblock
#: dos2unix.pod:489
msgid "In mode C<ascii> only line breaks are converted. This is the default conversion mode."
msgstr ""

#. type: textblock
#: dos2unix.pod:492
msgid "Although the name of this mode is ASCII, which is a 7 bit standard, the actual mode is 8 bit. Use always this mode when converting Unicode UTF-8 files."
msgstr ""

#. type: =item
#: dos2unix.pod:496
msgid "B<7bit>"
msgstr ""

#. type: textblock
#: dos2unix.pod:498
msgid "In this mode all 8 bit non-ASCII characters (with values from 128 to 255)  are converted to a 7 bit space."
msgstr ""

#. type: =item
#: dos2unix.pod:501
msgid "B<iso>"
msgstr ""

#. type: textblock
#: dos2unix.pod:503
msgid "Characters are converted between a DOS character set (code page) and ISO character set ISO-8859-1 (Latin-1) on Unix. DOS characters without ISO-8859-1 equivalent, for which conversion is not possible, are converted to a dot. The same counts for ISO-8859-1 characters without DOS counterpart."
msgstr ""

#. type: textblock
#: dos2unix.pod:508
msgid "When only option C<-iso> is used dos2unix will try to determine the active code page. When this is not possible dos2unix will use default code page CP437, which is mainly used in the USA.  To force a specific code page use options C<-437> (US), C<-850> (Western European), C<-860> (Portuguese), C<-863> (French Canadian), or C<-865> (Nordic).  Windows code page CP1252 (Western European) is also supported with option C<-1252>. For other code pages use dos2unix in combination with iconv(1).  Iconv can convert between a long list of character encodings."
msgstr ""

#. type: textblock
#: dos2unix.pod:517
msgid "Never use ISO conversion on Unicode text files. It will corrupt UTF-8 encoded files."
msgstr ""

#. type: textblock
#: dos2unix.pod:519
msgid "Some examples:"
msgstr "Nogle eksempler:"

#. type: textblock
#: dos2unix.pod:521
msgid "Convert from DOS default code page to Unix Latin-1:"
msgstr "Omdan fra DOS-tegnkodningstabel til Unix Latin-1:"

#. type: verbatim
#: dos2unix.pod:523
#, no-wrap
msgid ""
"    dos2unix -iso -n in.txt out.txt\n"
"\n"
msgstr ""
"    dos2unix -iso -n ind.txt ud.txt\n"
"\n"

#. type: textblock
#: dos2unix.pod:525
msgid "Convert from DOS CP850 to Unix Latin-1:"
msgstr "Omdan fra DOS CP850 til Unix Latin-1:"

#. type: verbatim
#: dos2unix.pod:527
#, no-wrap
msgid ""
"    dos2unix -850 -n in.txt out.txt\n"
"\n"
msgstr ""
"    dos2unix -850 -n ind.txt ud.txt\n"
"\n"

#. type: textblock
#: dos2unix.pod:529
msgid "Convert from Windows CP1252 to Unix Latin-1:"
msgstr ""

#. type: verbatim
#: dos2unix.pod:531
#, no-wrap
msgid ""
"    dos2unix -1252 -n in.txt out.txt\n"
"\n"
msgstr ""

#. type: textblock
#: dos2unix.pod:533
msgid "Convert from Windows CP1252 to Unix UTF-8 (Unicode):"
msgstr ""

#. type: verbatim
#: dos2unix.pod:535
#, no-wrap
msgid ""
"    iconv -f CP1252 -t UTF-8 in.txt | dos2unix > out.txt\n"
"\n"
msgstr ""

#. type: textblock
#: dos2unix.pod:537
msgid "Convert from Unix Latin-1 to DOS default code page:"
msgstr "Omdan fra Unix Latin-1 til DOS-tegnkodningstabel:"

#. type: verbatim
#: dos2unix.pod:539
#, no-wrap
msgid ""
"    unix2dos -iso -n in.txt out.txt\n"
"\n"
msgstr ""
"    unix2dos -iso -n ind.txt ud.txt\n"
"\n"

#. type: textblock
#: dos2unix.pod:541
msgid "Convert from Unix Latin-1 to DOS CP850:"
msgstr "Omdan fra Unix Latin-1 til DOS CP850:"

#. type: verbatim
#: dos2unix.pod:543
#, no-wrap
msgid ""
"    unix2dos -850 -n in.txt out.txt\n"
"\n"
msgstr ""
"    unix2dos -850 -n ind.txt ud.txt\n"
"\n"

#. type: textblock
#: dos2unix.pod:545
msgid "Convert from Unix Latin-1 to Windows CP1252:"
msgstr "Omdan fra Unix Latin-1 til Windows CP1252:"

#. type: verbatim
#: dos2unix.pod:547
#, no-wrap
msgid ""
"    unix2dos -1252 -n in.txt out.txt\n"
"\n"
msgstr ""
"    unix2dos -1252 -n ind.txt ud.txt\n"
"\n"

#. type: textblock
#: dos2unix.pod:549
msgid "Convert from Unix UTF-8 (Unicode) to Windows CP1252:"
msgstr "Omdan fra Unix UTF-8 (Unicode) til Windows CP1252:"

#. type: verbatim
#: dos2unix.pod:551
#, no-wrap
msgid ""
"    unix2dos < in.txt | iconv -f UTF-8 -t CP1252 > out.txt\n"
"\n"
msgstr ""
"    unix2dos < ind.txt | iconv -f UTF-8 -t CP1252 > ud.txt\n"
"\n"

#. type: textblock
#: dos2unix.pod:553
msgid "See also L<http://czyborra.com/charsets/codepages.html> and L<http://czyborra.com/charsets/iso8859.html>."
msgstr "Se også L<http://czyborra.com/charsets/codepages.html> og L<http://czyborra.com/charsets/iso8859.html>."

#. type: =head1
#: dos2unix.pod:558
msgid "UNICODE"
msgstr "UNICODE"

#. type: =head2
#: dos2unix.pod:560
msgid "Encodings"
msgstr "Kodninger"

#. type: textblock
#: dos2unix.pod:562
msgid "There exist different Unicode encodings. On Unix and Linux Unicode files are typically encoded in UTF-8 encoding. On Windows Unicode text files can be encoded in UTF-8, UTF-16, or UTF-16 big endian, but are mostly encoded in UTF-16 format."
msgstr ""

#. type: =head2
#: dos2unix.pod:567
msgid "Conversion"
msgstr "Omdannelse"

#. type: textblock
#: dos2unix.pod:569
msgid "Unicode text files can have DOS, Unix or Mac line breaks, like regular text files."
msgstr "Unicodetekstfiler kan have DOS-, Unix- eller Mac-linjeskift, ligesom almindelige tekstfiler."

#. type: textblock
#: dos2unix.pod:572
msgid "All versions of dos2unix and unix2dos can convert UTF-8 encoded files, because UTF-8 was designed for backward compatibility with ASCII."
msgstr ""

#. type: textblock
#: dos2unix.pod:575
msgid "Dos2unix and unix2dos with Unicode UTF-16 support, can read little and big endian UTF-16 encoded text files. To see if dos2unix was built with UTF-16 support type C<dos2unix -V>."
msgstr ""

#. type: textblock
#: dos2unix.pod:579
msgid "On Unix/Linux UTF-16 encoded files are converted to the locale character encoding. Use the locale(1) command to find out what the locale character encoding is. When conversion is not possible a conversion error will occur and the file will be skipped."
msgstr ""

#. type: textblock
#: dos2unix.pod:584
msgid "On Windows UTF-16 files are by default converted to UTF-8. UTF-8 formatted text files are well supported on both Windows and Unix/Linux."
msgstr ""

#. type: textblock
#: dos2unix.pod:587
msgid "UTF-16 and UTF-8 encoding are fully compatible, there will no text be lost in the conversion. When an UTF-16 to UTF-8 conversion error occurs, for instance when the UTF-16 input file contains an error, the file will be skipped."
msgstr ""

#. type: textblock
#: dos2unix.pod:591
msgid "When option C<-u> is used, the output file will be written in the same UTF-16 encoding as the input file. Option C<-u> prevents conversion to UTF-8."
msgstr ""

#. type: textblock
#: dos2unix.pod:594
msgid "Dos2unix and unix2dos have no option to convert UTF-8 files to UTF-16."
msgstr ""

#. type: textblock
#: dos2unix.pod:596
msgid "ISO and 7-bit mode conversion do not work on UTF-16 files."
msgstr ""

#. type: =head2
#: dos2unix.pod:598
msgid "Byte Order Mark"
msgstr ""

#. type: textblock
#: dos2unix.pod:600
msgid "On Windows Unicode text files typically have a Byte Order Mark (BOM), because many Windows programs (including Notepad) add BOMs by default. See also L<http://en.wikipedia.org/wiki/Byte_order_mark>."
msgstr ""

#. type: textblock
#: dos2unix.pod:604
msgid "On Unix Unicode files typically don't have a BOM. It is assumed that text files are encoded in the locale character encoding."
msgstr ""

#. type: textblock
#: dos2unix.pod:607
msgid "Dos2unix can only detect if a file is in UTF-16 format if the file has a BOM.  When an UTF-16 file doesn't have a BOM, dos2unix will see the file as a binary file."
msgstr ""

#. type: textblock
#: dos2unix.pod:611
msgid "Use option C<-ul> or C<-ub> to convert an UTF-16 file without BOM."
msgstr ""

#. type: textblock
#: dos2unix.pod:613
msgid "Dos2unix writes by default no BOM in the output file. With option C<-b> Dos2unix writes a BOM when the input file has a BOM."
msgstr ""

#. type: textblock
#: dos2unix.pod:616
msgid "Unix2dos writes by default a BOM in the output file when the input file has a BOM. Use option C<-r> to remove the BOM."
msgstr ""

#. type: textblock
#: dos2unix.pod:619
msgid "Dos2unix and unix2dos write always a BOM when option C<-m> is used."
msgstr ""

#. type: =head2
#: dos2unix.pod:621
msgid "Unicode file names on Windows"
msgstr ""

#. type: textblock
#: dos2unix.pod:623
msgid "Dos2unix has optional support for reading and writing Unicode file names in the Windows Command Prompt. That means that dos2unix can open files that have characters in the name that are not part of the default system ANSI code page.  To see if dos2unix for Windows was built with Unicode file name support type C<dos2unix -V>."
msgstr ""

#. type: textblock
#: dos2unix.pod:629
msgid "There are some issues with displaying Unicode file names in a Windows console.  See option C<-D>, C<--display-enc>. The file names may be displayed wrongly in the console, but the files will be written with the correct name."
msgstr ""

#. type: =head2
#: dos2unix.pod:633
msgid "Unicode examples"
msgstr ""

#. type: textblock
#: dos2unix.pod:635
msgid "Convert from Windows UTF-16 (with BOM) to Unix UTF-8:"
msgstr ""

#. type: verbatim
#: dos2unix.pod:637
#, no-wrap
msgid ""
"    dos2unix -n in.txt out.txt\n"
"\n"
msgstr ""

#. type: textblock
#: dos2unix.pod:639
msgid "Convert from Windows UTF-16LE (without BOM) to Unix UTF-8:"
msgstr ""

#. type: verbatim
#: dos2unix.pod:641
#, no-wrap
msgid ""
"    dos2unix -ul -n in.txt out.txt\n"
"\n"
msgstr ""
"    dos2unix -ul -n ind.txt ud.txt\n"
"\n"

#. type: textblock
#: dos2unix.pod:643
msgid "Convert from Unix UTF-8 to Windows UTF-8 with BOM:"
msgstr "Omdan fra Unix UTF-8 til Windows UTF-8 med BOM:"

#. type: verbatim
#: dos2unix.pod:645
#, no-wrap
msgid ""
"    unix2dos -m -n in.txt out.txt\n"
"\n"
msgstr ""
"    unix2dos -m -n ind.txt ud.txt\n"
"\n"

#. type: textblock
#: dos2unix.pod:647
msgid "Convert from Unix UTF-8 to Windows UTF-16:"
msgstr "Omdan fra Unix UTF-8 til Windows UTF-16:"

#. type: verbatim
#: dos2unix.pod:649
#, no-wrap
msgid ""
"    unix2dos < in.txt | iconv -f UTF-8 -t UTF-16 > out.txt\n"
"\n"
msgstr ""
"    unix2dos < ind.txt | iconv -f UTF-8 -t UTF-16 > ud.txt\n"
"\n"

#. type: =head1
#: dos2unix.pod:651
msgid "GB18030"
msgstr "GB18030"

#. type: textblock
#: dos2unix.pod:653
msgid "GB18030 is a Chinese government standard. A mandatory subset of the GB18030 standard is officially required for all software products sold in China. See also L<http://en.wikipedia.org/wiki/GB_18030>."
msgstr "GB18030 er en kinesisk regeringsstandard. Et krævet undersæt af GB18030-standarden er officielt krævet for alle programmer solgt i Kina. Se også L<http://en.wikipedia.org/wiki/GB_18030>."

#. type: textblock
#: dos2unix.pod:657
msgid "GB18030 is fully compatible with Unicode, and can be considered an unicode transformation format. Like UTF-8, GB18030 is compatible with ASCII. GB18030 is also compatible with Windows code page 936, also known as GBK."
msgstr ""

#. type: textblock
#: dos2unix.pod:661
msgid "On Unix/Linux UTF-16 files are converted to GB18030 when the locale encoding is set to GB18030. Note that this will only work if the locale is supported by the system. Use command C<locale -a> to get the list of supported locales."
msgstr ""

#. type: textblock
#: dos2unix.pod:665
msgid "On Windows you need to use option C<-gb> to convert UTF-16 files to GB18030."
msgstr ""

#. type: textblock
#: dos2unix.pod:667
msgid "GB18030 encoded files can have a Byte Order Mark, like Unicode files."
msgstr ""

#. type: =head1
#: dos2unix.pod:669
msgid "EXAMPLES"
msgstr "EKSEMPLER"

#. type: textblock
#: dos2unix.pod:671
msgid "Read input from 'stdin' and write output to 'stdout':"
msgstr "Læs inddata fra »stdin« og skriv uddata til »stdout«:"

#. type: verbatim
#: dos2unix.pod:673
#, no-wrap
msgid ""
"    dos2unix < a.txt\n"
"    cat a.txt | dos2unix\n"
"\n"
msgstr ""
"    dos2unix < a.txt\n"
"    cat a.txt | dos2unix\n"
"\n"

#. type: textblock
#: dos2unix.pod:676
msgid "Convert and replace a.txt. Convert and replace b.txt:"
msgstr "Omdan og erstat a.txt. Omdan og erstat b.txt:"

#. type: verbatim
#: dos2unix.pod:678
#, no-wrap
msgid ""
"    dos2unix a.txt b.txt\n"
"    dos2unix -o a.txt b.txt\n"
"\n"
msgstr ""
"    dos2unix a.txt b.txt\n"
"    dos2unix -o a.txt b.txt\n"
"\n"

#. type: textblock
#: dos2unix.pod:681
msgid "Convert and replace a.txt in ascii conversion mode:"
msgstr ""

#. type: verbatim
#: dos2unix.pod:683
#, no-wrap
msgid ""
"    dos2unix a.txt\n"
"\n"
msgstr ""

#. type: textblock
#: dos2unix.pod:685
msgid "Convert and replace a.txt in ascii conversion mode, convert and replace b.txt in 7bit conversion mode:"
msgstr ""

#. type: verbatim
#: dos2unix.pod:688
#, no-wrap
msgid ""
"    dos2unix a.txt -c 7bit b.txt\n"
"    dos2unix -c ascii a.txt -c 7bit b.txt\n"
"    dos2unix -ascii a.txt -7 b.txt\n"
"\n"
msgstr ""

#. type: textblock
#: dos2unix.pod:692
msgid "Convert a.txt from Mac to Unix format:"
msgstr ""

#. type: verbatim
#: dos2unix.pod:694
#, no-wrap
msgid ""
"    dos2unix -c mac a.txt\n"
"    mac2unix a.txt\n"
"\n"
msgstr ""

#. type: textblock
#: dos2unix.pod:697
msgid "Convert a.txt from Unix to Mac format:"
msgstr ""

#. type: verbatim
#: dos2unix.pod:699
#, no-wrap
msgid ""
"    unix2dos -c mac a.txt\n"
"    unix2mac a.txt\n"
"\n"
msgstr ""

#. type: textblock
#: dos2unix.pod:702
msgid "Convert and replace a.txt while keeping original date stamp:"
msgstr ""

#. type: verbatim
#: dos2unix.pod:704
#, no-wrap
msgid ""
"    dos2unix -k a.txt\n"
"    dos2unix -k -o a.txt\n"
"\n"
msgstr ""

#. type: textblock
#: dos2unix.pod:707
msgid "Convert a.txt and write to e.txt:"
msgstr ""

#. type: verbatim
#: dos2unix.pod:709
#, no-wrap
msgid ""
"    dos2unix -n a.txt e.txt\n"
"\n"
msgstr ""

#. type: textblock
#: dos2unix.pod:711
msgid "Convert a.txt and write to e.txt, keep date stamp of e.txt same as a.txt:"
msgstr ""

#. type: verbatim
#: dos2unix.pod:713
#, no-wrap
msgid ""
"    dos2unix -k -n a.txt e.txt\n"
"\n"
msgstr ""

#. type: textblock
#: dos2unix.pod:715
msgid "Convert and replace a.txt, convert b.txt and write to e.txt:"
msgstr ""

#. type: verbatim
#: dos2unix.pod:717
#, no-wrap
msgid ""
"    dos2unix a.txt -n b.txt e.txt\n"
"    dos2unix -o a.txt -n b.txt e.txt\n"
"\n"
msgstr ""

#. type: textblock
#: dos2unix.pod:720
msgid "Convert c.txt and write to e.txt, convert and replace a.txt, convert and replace b.txt, convert d.txt and write to f.txt:"
msgstr ""

#. type: verbatim
#: dos2unix.pod:723
#, no-wrap
msgid ""
"    dos2unix -n c.txt e.txt -o a.txt b.txt -n d.txt f.txt\n"
"\n"
msgstr ""

#. type: =head1
#: dos2unix.pod:725
msgid "RECURSIVE CONVERSION"
msgstr ""

#. type: textblock
#: dos2unix.pod:727
msgid "In a Unix shell the find(1) and xargs(1) commands can be used to run dos2unix recursively over all text files in a directory tree. For instance to convert all .txt files in the directory tree under the current directory type:"
msgstr ""

#. type: verbatim
#: dos2unix.pod:731
#, no-wrap
msgid ""
"    find . -name '*.txt' -print0 |xargs -0 dos2unix\n"
"\n"
msgstr ""

#. type: textblock
#: dos2unix.pod:733
msgid "The find(1) option C<-print0> and corresponding xargs(1) option C<-0> are needed when there are files with spaces or quotes in the name. Otherwise these options can be omitted. Another option is to use find(1) with the C<-exec> option:"
msgstr ""

#. type: verbatim
#: dos2unix.pod:737
#, no-wrap
msgid ""
"    find . -name '*.txt' -exec dos2unix {} \\;\n"
"\n"
msgstr ""

#. type: textblock
#: dos2unix.pod:739
msgid "In a Windows Command Prompt the following command can be used:"
msgstr ""

#. type: verbatim
#: dos2unix.pod:741
#, no-wrap
msgid ""
"    for /R %G in (*.txt) do dos2unix \"%G\"\n"
"\n"
msgstr ""

#. type: textblock
#: dos2unix.pod:743
msgid "PowerShell users can use the following command in Windows PowerShell:"
msgstr ""

#. type: verbatim
#: dos2unix.pod:745
#, no-wrap
msgid ""
"    get-childitem -path . -filter '*.txt' -recurse | foreach-object {dos2unix $_.Fullname}\n"
"\n"
msgstr ""

#. type: =head1
#: dos2unix.pod:748
msgid "LOCALIZATION"
msgstr ""

#. type: =item
#: dos2unix.pod:752
msgid "B<LANG>"
msgstr ""

#. type: textblock
#: dos2unix.pod:754
msgid "The primary language is selected with the environment variable LANG. The LANG variable consists out of several parts. The first part is in small letters the language code. The second is optional and is the country code in capital letters, preceded with an underscore. There is also an optional third part: character encoding, preceded with a dot. A few examples for POSIX standard type shells:"
msgstr ""

#. type: verbatim
#: dos2unix.pod:761
#, no-wrap
msgid ""
"    export LANG=nl               Dutch\n"
"    export LANG=nl_NL            Dutch, The Netherlands\n"
"    export LANG=nl_BE            Dutch, Belgium\n"
"    export LANG=es_ES            Spanish, Spain\n"
"    export LANG=es_MX            Spanish, Mexico\n"
"    export LANG=en_US.iso88591   English, USA, Latin-1 encoding\n"
"    export LANG=en_GB.UTF-8      English, UK, UTF-8 encoding\n"
"\n"
msgstr ""

#. type: textblock
#: dos2unix.pod:769
msgid "For a complete list of language and country codes see the gettext manual: L<http://www.gnu.org/software/gettext/manual/html_node/Usual-Language-Codes.html>"
msgstr ""

#. type: textblock
#: dos2unix.pod:772
msgid "On Unix systems you can use the command locale(1) to get locale specific information."
msgstr ""

#. type: =item
#: dos2unix.pod:775
msgid "B<LANGUAGE>"
msgstr ""

#. type: textblock
#: dos2unix.pod:777
msgid "With the LANGUAGE environment variable you can specify a priority list of languages, separated by colons. Dos2unix gives preference to LANGUAGE over LANG.  For instance, first Dutch and then German: C<LANGUAGE=nl:de>. You have to first enable localization, by setting LANG (or LC_ALL) to a value other than \"C\", before you can use a language priority list through the LANGUAGE variable. See also the gettext manual: L<http://www.gnu.org/software/gettext/manual/html_node/The-LANGUAGE-variable.html>"
msgstr ""

#. type: textblock
#: dos2unix.pod:785
msgid "If you select a language which is not available you will get the standard English messages."
msgstr ""

#. type: =item
#: dos2unix.pod:789
msgid "B<DOS2UNIX_LOCALEDIR>"
msgstr ""

#. type: textblock
#: dos2unix.pod:791
msgid "With the environment variable DOS2UNIX_LOCALEDIR the LOCALEDIR set during compilation can be overruled. LOCALEDIR is used to find the language files. The GNU default value is C</usr/local/share/locale>.  Option B<--version> will display the LOCALEDIR that is used."
msgstr ""

#. type: textblock
#: dos2unix.pod:796
msgid "Example (POSIX shell):"
msgstr ""

#. type: verbatim
#: dos2unix.pod:798
#, no-wrap
msgid ""
"    export DOS2UNIX_LOCALEDIR=$HOME/share/locale\n"
"\n"
msgstr ""

#. type: =head1
#: dos2unix.pod:803
msgid "RETURN VALUE"
msgstr "RETURVÆRDI"

#. type: textblock
#: dos2unix.pod:805
msgid "On success, zero is returned.  When a system error occurs the last system error will be returned. For other errors 1 is returned."
msgstr ""

#. type: textblock
#: dos2unix.pod:808
msgid "The return value is always zero in quiet mode, except when wrong command-line options are used."
msgstr ""

#. type: =head1
#: dos2unix.pod:811
msgid "STANDARDS"
msgstr "STANDARDER"

#. type: textblock
#: dos2unix.pod:813
msgid "L<http://en.wikipedia.org/wiki/Text_file>"
msgstr "L<http://da.wikipedia.org/wiki/Tekstformat>"

#. type: textblock
#: dos2unix.pod:815
msgid "L<http://en.wikipedia.org/wiki/Carriage_return>"
msgstr "L<http://en.wikipedia.org/wiki/Carriage_return>"

#. type: textblock
#: dos2unix.pod:817
msgid "L<http://en.wikipedia.org/wiki/Newline>"
msgstr "L<http://en.wikipedia.org/wiki/Newline>"

#. type: textblock
#: dos2unix.pod:819
msgid "L<http://en.wikipedia.org/wiki/Unicode>"
msgstr "L<http://da.wikipedia.org/wiki/Unicode>"

#. type: =head1
#: dos2unix.pod:821
msgid "AUTHORS"
msgstr "FORFATTERE"

#. type: textblock
#: dos2unix.pod:823
msgid "Benjamin Lin - <blin@socs.uts.edu.au>, Bernd Johannes Wuebben (mac2unix mode) - <wuebben@kde.org>, Christian Wurll (add extra newline) - <wurll@ira.uka.de>, Erwin Waterlander - <waterlan@xs4all.nl> (maintainer)"
msgstr "Benjamin Lin - <blin@socs.uts.edu.au>, Bernd Johannes Wuebben (mac2unix mode) - <wuebben@kde.org>, Christian Wurll (tilføj ekstra nylinje) - <wurll@ira.uka.de>, Erwin Waterlander - <waterlan@xs4all.nl> (vedligeholder)"

#. type: textblock
#: dos2unix.pod:828
msgid "Project page: L<http://waterlan.home.xs4all.nl/dos2unix.html>"
msgstr "Projektside: L<http://waterlan.home.xs4all.nl/dos2unix.html>"

#. type: textblock
#: dos2unix.pod:830
msgid "SourceForge page: L<http://sourceforge.net/projects/dos2unix/>"
msgstr "SourceForge-side: L<http://sourceforge.net/projects/dos2unix/>"

#. type: =head1
#: dos2unix.pod:832
msgid "SEE ALSO"
msgstr "SE OGSÅ"

#. type: textblock
#: dos2unix.pod:834
msgid "file(1)  find(1)  iconv(1)  locale(1)  xargs(1)"
msgstr "file(1)  find(1)  iconv(1)  locale(1)  xargs(1)"