# German messages for GNU tar. # This file is distributed under the same license as the tar package. # Copyright (C) 2001 Free Software Foundation, Inc. # Ulrich Drepper , 1995? # Karl Eichwalder , 1996 # Christian Kirsch , 1996, 2001 # Michael Piefel , 2003, 2006, 2007, 2008, 2009, 2010, 2011, 2013, 2014, 2016, 2018, 2023 # #: src/create.c:1539 msgid "" msgstr "" "Project-Id-Version: tar 1.35\n" "Report-Msgid-Bugs-To: bug-tar@gnu.org\n" "POT-Creation-Date: 2025-10-19 09:40+0300\n" "PO-Revision-Date: 2023-07-19 18:36+0200\n" "Last-Translator: Michael Piefel \n" "Language-Team: German \n" "Language: de\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=(n != 1);\n" "X-Bugs: Report translation errors to the Language-Team address.\n" "X-Generator: Poedit 3.3.1\n" #: gnu/argmatch.c:145 #, c-format msgid "invalid argument %s for %s" msgstr "ungültiges Argument %s für %s" #: gnu/argmatch.c:146 #, c-format msgid "ambiguous argument %s for %s" msgstr "mehrdeutiges Argument %s für %s" #: gnu/argmatch.c:165 msgid "Valid arguments are:" msgstr "Zulässige Argumente sind:" #: gnu/argp-help.c:151 #, c-format msgid "ARGP_HELP_FMT: %s value is less than or equal to %s" msgstr "ARGP_HELP_FMT: %s-Wert ist kleiner oder gleich %s" #: gnu/argp-help.c:227 #, c-format msgid "%.*s: ARGP_HELP_FMT parameter requires a value" msgstr "%.*s: ARGP_HELP_FMT-Parameter benötigt einen Wert" #: gnu/argp-help.c:237 #, c-format msgid "%.*s: Unknown ARGP_HELP_FMT parameter" msgstr "%.*s: unbekannter ARGP_HELP_FMT-Parameter" #: gnu/argp-help.c:250 #, c-format msgid "Garbage in ARGP_HELP_FMT: %s" msgstr "Müll in ARGP_HELP_FMT: %s" #: gnu/argp-help.c:1368 msgid "Mandatory or optional arguments to long options are also mandatory or optional for any corresponding short options." msgstr "Erforderliche oder optionale Argumente für lange Optionen sind ebenso erforderlich bzw. optional für die entsprechenden Kurzoptionen." #: gnu/argp-help.c:1734 msgid "Usage:" msgstr "Aufruf:" #: gnu/argp-help.c:1738 msgid " or: " msgstr " oder: " #: gnu/argp-help.c:1750 msgid " [OPTION...]" msgstr " [OPTION...]" #: gnu/argp-help.c:1777 #, c-format msgid "Try '%s --help' or '%s --usage' for more information.\n" msgstr "„%s --help“ oder „%s --usage“ gibt weitere Informationen.\n" #: gnu/argp-help.c:1805 #, c-format msgid "Report bugs to %s.\n" msgstr "Melden Sie Fehler (auf Englisch, mit LC_ALL=C) an %s.\n" #: gnu/argp-help.c:2006 gnu/error.c:208 msgid "Unknown system error" msgstr "Unbekannter Systemfehler" #: gnu/argp-parse.c:80 msgid "give this help list" msgstr "diese Hilfe ausgeben" #: gnu/argp-parse.c:81 msgid "give a short usage message" msgstr "eine kurze Benutzungsübersicht ausgeben" #: gnu/argp-parse.c:82 src/tar.c:638 src/tar.c:640 src/tar.c:750 #: tests/genfile.c:128 msgid "NAME" msgstr "NAME" #: gnu/argp-parse.c:83 msgid "set the program name" msgstr "den Programmnamen setzen" #: gnu/argp-parse.c:84 msgid "SECS" msgstr "SEK" #: gnu/argp-parse.c:85 msgid "hang for SECS seconds (default 3600)" msgstr "für SEK Sekunden hängenbleiben (Voreinst.: 3600)" #: gnu/argp-parse.c:142 msgid "print program version" msgstr "Programmversion ausgeben" #: gnu/argp-parse.c:159 msgid "(PROGRAM ERROR) No version known!?" msgstr "(PROGRAMMFEHLER) Keine Version bekannt!?" #: gnu/argp-parse.c:612 #, c-format msgid "%s: Too many arguments\n" msgstr "%s: Zu viele Argumente\n" #: gnu/argp-parse.c:758 msgid "(PROGRAM ERROR) Option should have been recognized!?" msgstr "(PROGRAMMFEHLER) Option hätte erkannt werden müssen!?" #: gnu/closeout.c:121 msgid "write error" msgstr "Schreibfehler" #: gnu/getopt.c:282 #, c-format msgid "%s: option '%s%s' is ambiguous\n" msgstr "%s: Option „%s%s“ ist mehrdeutig\n" #: gnu/getopt.c:288 #, c-format msgid "%s: option '%s%s' is ambiguous; possibilities:" msgstr "%s: Option „%s%s“ ist mehrdeutig; Möglichkeiten:" #: gnu/getopt.c:322 #, c-format msgid "%s: unrecognized option '%s%s'\n" msgstr "%s: Unbekannte Option „%s%s“\n" #: gnu/getopt.c:348 #, c-format msgid "%s: option '%s%s' doesn't allow an argument\n" msgstr "%s: Option „%s%s“ erlaubt kein Argument\n" #: gnu/getopt.c:363 #, c-format msgid "%s: option '%s%s' requires an argument\n" msgstr "%s: Option „%s%s“ benötigt ein Argument\n" #: gnu/getopt.c:624 #, c-format msgid "%s: invalid option -- '%c'\n" msgstr "%s: Ungültige Option -- „%c“\n" #: gnu/getopt.c:639 gnu/getopt.c:685 #, c-format msgid "%s: option requires an argument -- '%c'\n" msgstr "%s: Option benötigt ein Argument -- „%c“.\n" #: gnu/obstack.c:357 gnu/obstack.c:359 gnu/xalloc-die.c:34 msgid "memory exhausted" msgstr "Kein Speicher mehr" #: gnu/openat-die.c:38 #, c-format msgid "unable to record current working directory" msgstr "Kann Arbeitsverzeichnis nicht aufzeichnen." #: gnu/openat-die.c:57 #, c-format msgid "failed to return to initial working directory" msgstr "Konnte nicht zu ursprünglichem Arbeitsverzeichnis zurückkehren." #. TRANSLATORS: #. Get translations for open and closing quotation marks. #. The message catalog should translate "`" to a left #. quotation mark suitable for the locale, and similarly for #. "'". For example, a French Unicode local should translate #. these to U+00AB (LEFT-POINTING DOUBLE ANGLE #. QUOTATION MARK), and U+00BB (RIGHT-POINTING DOUBLE ANGLE #. QUOTATION MARK), respectively. #. #. If the catalog has no translation, we will try to #. use Unicode U+2018 (LEFT SINGLE QUOTATION MARK) and #. Unicode U+2019 (RIGHT SINGLE QUOTATION MARK). If the #. current locale is not Unicode, locale_quoting_style #. will quote 'like this', and clocale_quoting_style will #. quote "like this". You should always include translations #. for "`" and "'" even if U+2018 and U+2019 are appropriate #. for your locale. #. #. If you don't know what to put here, please see #. #. and use glyphs suitable for your language. #: gnu/quotearg.c:354 msgid "`" msgstr "„" #: gnu/quotearg.c:355 msgid "'" msgstr "“" #. TRANSLATORS: A regular expression testing for an affirmative answer #. (english: "yes"). Testing the first character may be sufficient. #. Take care to consider upper and lower case. #. To enquire the regular expression that your system uses for this #. purpose, you can use the command #. locale -k LC_MESSAGES | grep '^yesexpr=' #: gnu/rpmatch.c:149 msgid "^[yY]" msgstr "^[yYjJ]" #. TRANSLATORS: A regular expression testing for a negative answer #. (english: "no"). Testing the first character may be sufficient. #. Take care to consider upper and lower case. #. To enquire the regular expression that your system uses for this #. purpose, you can use the command #. locale -k LC_MESSAGES | grep '^noexpr=' #: gnu/rpmatch.c:162 msgid "^[nN]" msgstr "^[nN]" #: gnu/version-etc.c:73 #, c-format msgid "Packaged by %s (%s)\n" msgstr "Paketiert von %s (%s)\n" #: gnu/version-etc.c:76 #, c-format msgid "Packaged by %s\n" msgstr "Paketiert von %s\n" #. TRANSLATORS: Translate "(C)" to the copyright symbol #. (C-in-a-circle), if this symbol is available in the user's #. locale. Otherwise, do not translate "(C)"; leave it as-is. #: gnu/version-etc.c:83 msgid "(C)" msgstr "©" #. TRANSLATORS: The %s placeholder is the web address of the GPL license. #: gnu/version-etc.c:88 #, c-format msgid "" "License GPLv3+: GNU GPL version 3 or later <%s>.\n" "This is free software: you are free to change and redistribute it.\n" "There is NO WARRANTY, to the extent permitted by law.\n" msgstr "" "License GPLv3+: GNU GPL Version 3 oder später <%s>\n" "Dies ist freie Software: Sie dürfen sie ändern und weiter verbreiten.\n" "Es gibt KEINERLEI GARANTIE, so weit das Gesetz es erlaubt.\n" #. TRANSLATORS: %s denotes an author name. #: gnu/version-etc.c:105 #, c-format msgid "Written by %s.\n" msgstr "Geschrieben von %s.\n" #. TRANSLATORS: Each %s denotes an author name. #: gnu/version-etc.c:109 #, c-format msgid "Written by %s and %s.\n" msgstr "Geschrieben von %s und %s.\n" #. TRANSLATORS: Each %s denotes an author name. #: gnu/version-etc.c:113 #, c-format msgid "Written by %s, %s, and %s.\n" msgstr "Geschrieben von %s, %s und %s.\n" #. TRANSLATORS: Each %s denotes an author name. #. You can use line breaks, estimating that each author name occupies #. ca. 16 screen columns and that a screen line has ca. 80 columns. #: gnu/version-etc.c:120 #, c-format msgid "" "Written by %s, %s, %s,\n" "and %s.\n" msgstr "" "Geschrieben von %s, %s, %s\n" "und %s.\n" #. TRANSLATORS: Each %s denotes an author name. #. You can use line breaks, estimating that each author name occupies #. ca. 16 screen columns and that a screen line has ca. 80 columns. #: gnu/version-etc.c:127 #, c-format msgid "" "Written by %s, %s, %s,\n" "%s, and %s.\n" msgstr "" "Geschrieben von %s, %s, %s,\n" "%s und %s.\n" #. TRANSLATORS: Each %s denotes an author name. #. You can use line breaks, estimating that each author name occupies #. ca. 16 screen columns and that a screen line has ca. 80 columns. #: gnu/version-etc.c:134 #, c-format msgid "" "Written by %s, %s, %s,\n" "%s, %s, and %s.\n" msgstr "" "Geschrieben von %s, %s, %s,\n" "%s, %s und %s.\n" #. TRANSLATORS: Each %s denotes an author name. #. You can use line breaks, estimating that each author name occupies #. ca. 16 screen columns and that a screen line has ca. 80 columns. #: gnu/version-etc.c:142 #, c-format msgid "" "Written by %s, %s, %s,\n" "%s, %s, %s, and %s.\n" msgstr "" "Geschrieben von %s, %s, %s,\n" "%s, %s, %s und %s.\n" #. TRANSLATORS: Each %s denotes an author name. #. You can use line breaks, estimating that each author name occupies #. ca. 16 screen columns and that a screen line has ca. 80 columns. #: gnu/version-etc.c:150 #, c-format msgid "" "Written by %s, %s, %s,\n" "%s, %s, %s, %s,\n" "and %s.\n" msgstr "" "Geschrieben von %s, %s, %s,\n" "%s, %s, %s, %s\n" "und %s.\n" #. TRANSLATORS: Each %s denotes an author name. #. You can use line breaks, estimating that each author name occupies #. ca. 16 screen columns and that a screen line has ca. 80 columns. #: gnu/version-etc.c:159 #, c-format msgid "" "Written by %s, %s, %s,\n" "%s, %s, %s, %s,\n" "%s, and %s.\n" msgstr "" "Geschrieben von %s, %s, %s,\n" "%s, %s, %s, %s,\n" "%s und %s.\n" #. TRANSLATORS: Each %s denotes an author name. #. You can use line breaks, estimating that each author name occupies #. ca. 16 screen columns and that a screen line has ca. 80 columns. #: gnu/version-etc.c:170 #, c-format msgid "" "Written by %s, %s, %s,\n" "%s, %s, %s, %s,\n" "%s, %s, and others.\n" msgstr "" "Geschrieben von %s, %s, %s,\n" "%s, %s, %s, %s,\n" "%s, %s und anderen.\n" #. TRANSLATORS: The placeholder indicates the bug-reporting address #. for this package. Please add _another line_ saying #. "Report translation bugs to <...>\n" with the address for translation #. bugs (typically your translation team's web or email address). #: gnu/version-etc.c:249 #, c-format msgid "Report bugs to: %s\n" msgstr "Melden Sie Fehler (auf Englisch, mit LC_ALL=C) an: %s\n" #: gnu/version-etc.c:251 #, c-format msgid "Report %s bugs to: %s\n" msgstr "Melden Sie Fehler in %s (auf Englisch, mit LC_ALL=C) an: %s\n" #: gnu/version-etc.c:255 gnu/version-etc.c:257 #, c-format msgid "%s home page: <%s>\n" msgstr "Homepage von %s: <%s>\n" #: gnu/version-etc.c:260 #, c-format msgid "General help using GNU software: <%s>\n" msgstr "Allgemeine Hilfe zu GNU-Software: <%s>\n" #. TRANSLATORS: %s after `Cannot' is a function name, e.g. `Cannot open'. #. Directly translating this to another language will not work, first because #. %s itself is not translated. #. Translate it as `%s: Function %s failed'. #: lib/paxerror.c:105 lib/paxerror.c:117 #, c-format msgid "%s: Cannot %s" msgstr "%s: Funktion %s fehlgeschlagen" #. TRANSLATORS: %s after `Cannot' is a function name, e.g. `Cannot open'. #. Directly translating this to another language will not work, first because #. %s itself is not translated. #. Translate it as `%s: Function %s failed'. #: lib/paxerror.c:129 #, c-format msgid "%s: Warning: Cannot %s" msgstr "%s: Warnung: Funktion %s fehlgeschlagen" #: lib/paxerror.c:137 #, c-format msgid "%s: Cannot change mode to %s" msgstr "%s: Kann Zugriffsrechte nicht zu %s ändern" #: lib/paxerror.c:144 #, c-format msgid "%s: Cannot change ownership to uid %ju, gid %ju" msgstr "%s: Kann Datei-Eigentümer nicht zu UID %ju, GID %ju ändern" #: lib/paxerror.c:169 #, c-format msgid "%s: Cannot hard link to %s" msgstr "%s: Kann keine harte Verknüpfung zu „%s“ anlegen" #: lib/paxerror.c:220 lib/paxerror.c:250 #, fuzzy, c-format #| msgid "%s: Read error at byte %jd, while reading %zu byte" #| msgid_plural "%s: Read error at byte %jd, while reading %zu bytes" msgid "%s: Read error at byte %jd, while reading %td byte" msgid_plural "%s: Read error at byte %jd, while reading %td bytes" msgstr[0] "%s: Lesefehler bei Byte %jd beim Lesen von einem Byte" msgstr[1] "%s: Lesefehler bei Byte %jd beim Lesen von %zu Bytes" #: lib/paxerror.c:296 #, c-format msgid "%s: Cannot seek to %jd" msgstr "%s: Kann nicht auf %jd positionieren" #: lib/paxerror.c:309 #, c-format msgid "%s: Warning: Cannot seek to %jd" msgstr "%s: Warnung: Kann nicht auf %jd positionieren" #: lib/paxerror.c:316 #, c-format msgid "%s: Cannot create symlink to %s" msgstr "%s: Kann keine symbolische Verknüpfung zu „%s“ anlegen" #: lib/paxerror.c:381 #, fuzzy, c-format #| msgid "%s: Wrote only %zu of %zu byte" #| msgid_plural "%s: Wrote only %zu of %zu bytes" msgid "%s: Wrote only %td of %td byte" msgid_plural "%s: Wrote only %td of %td bytes" msgstr[0] "%s: Nur %zu von einem Byte geschrieben" msgstr[1] "%s: Nur %zu von %zu Bytes geschrieben" #: lib/paxnames.c:125 #, c-format msgid "Removing leading `%s' from member names" msgstr "Entferne führende „%s“ von Elementnamen" #: lib/paxnames.c:126 #, c-format msgid "Removing leading `%s' from hard link targets" msgstr "Entferne führende „%s“ von Zielen harter Verknüpfungen" #: lib/paxnames.c:139 msgid "Substituting `.' for empty member name" msgstr "Ersetze „.“ für leeren Elementnamen" #: lib/paxnames.c:140 msgid "Substituting `.' for empty hard link target" msgstr "Ersetze „.“ für leeres Ziel einer harten Verknüpfung" #: lib/rtapelib.c:271 #, c-format msgid "exec/tcp: Service not available" msgstr "exec/tcp: Service nicht verfügbar." #: lib/rtapelib.c:278 lib/rtapelib.c:302 #, c-format msgid "stdin" msgstr "Standardeingabe" #: lib/rtapelib.c:284 lib/rtapelib.c:305 src/tar.c:2848 #, c-format msgid "stdout" msgstr "Standardausgabe" #: lib/rtapelib.c:541 #, c-format msgid "Cannot redirect files for remote shell" msgstr "Kann Dateien für Remote-Shell nicht umleiten." #: lib/rtapelib.c:546 #, c-format msgid "Cannot reset uid and gid: %s" msgstr "Kann UID und GID nicht zurücksetzen: %s" #: lib/rtapelib.c:560 #, c-format msgid "Cannot execute remote shell" msgstr "Kann Remote-Shell nicht ausführen." #: rmt/rmt.c:437 msgid "Seek direction out of range" msgstr "Richtung für Positionierung nicht zulässig." #: rmt/rmt.c:443 msgid "Invalid seek direction" msgstr "Ungültige Richtung für Positionierung" #: rmt/rmt.c:451 msgid "Invalid seek offset" msgstr "Ungültiger Betrag für Positionierung" #: rmt/rmt.c:457 msgid "Seek offset out of range" msgstr "Positionierungsangabe außerhalb des zulässigen Bereichs." #: rmt/rmt.c:495 rmt/rmt.c:543 rmt/rmt.c:608 msgid "Invalid byte count" msgstr "Ungültige Bytezahl" #: rmt/rmt.c:502 rmt/rmt.c:550 rmt/rmt.c:617 msgid "Byte count out of range" msgstr "Bytezahl außerhalb des zulässigen Bereichs" #: rmt/rmt.c:558 msgid "Premature eof" msgstr "Vorzeitiges Dateiende" #: rmt/rmt.c:599 msgid "Invalid operation code" msgstr "Ungültiger Arbeitsmodus" #: rmt/rmt.c:623 #, fuzzy #| msgid "Byte count out of range" msgid "Opcode out of range" msgstr "Bytezahl außerhalb des zulässigen Bereichs" #: rmt/rmt.c:632 rmt/rmt.c:676 msgid "Operation not supported" msgstr "Operation nicht gestattet" #: rmt/rmt.c:660 msgid "Unexpected arguments" msgstr "Unerwartete Argumente" #: rmt/rmt.c:685 msgid "Manipulate a tape drive, accepting commands from a remote process" msgstr "Ein Bandlaufwerk bearbeiten, dabei Befehle von entferntem Prozess annehmen" #: rmt/rmt.c:692 src/tar.c:569 src/tar.c:573 src/tar.c:747 src/tar.c:763 #: src/tar.c:852 src/tar.c:863 tests/genfile.c:173 msgid "NUMBER" msgstr "ZAHL" #: rmt/rmt.c:693 msgid "set debug level" msgstr "Debug-Level setzen" #: rmt/rmt.c:694 src/names.c:79 src/names.c:83 src/names.c:101 src/names.c:111 #: src/names.c:114 src/names.c:117 src/names.c:120 src/names.c:122 #: src/tar.c:567 src/tar.c:642 src/tar.c:644 src/tar.c:754 src/tar.c:880 #: tests/genfile.c:130 tests/genfile.c:187 tests/genfile.c:191 #: tests/genfile.c:194 tests/genfile.c:200 msgid "FILE" msgstr "DATEI" #: rmt/rmt.c:695 msgid "set debug output file name" msgstr "Dateinamen für Debug-Ausschriften setzen" #: rmt/rmt.c:711 rmt/rmt.c:779 #, c-format msgid "cannot open %s" msgstr "kann „%s“ nicht öffnen" #: rmt/rmt.c:776 tests/genfile.c:1028 #, c-format msgid "too many arguments" msgstr "zu viele Argumente" #: rmt/rmt.c:818 msgid "Garbage command" msgstr "Ungültiger Befehl" #: src/buffer.c:460 src/buffer.c:465 src/buffer.c:802 src/buffer.c:1424 #: src/buffer.c:1462 src/buffer.c:1474 src/buffer.c:1503 src/delete.c:207 #: src/list.c:275 src/update.c:187 msgid "This does not look like a tar archive" msgstr "Das sieht nicht wie ein „tar“-Archiv aus." #: src/buffer.c:578 msgid "Total bytes read" msgstr "Gesamtzahl gelesener Bytes" #: src/buffer.c:580 msgid "Total bytes written" msgstr "Gesamtzahl geschriebener Bytes" #: src/buffer.c:581 msgid "Total bytes deleted" msgstr "Gesamtzahl gelöschter Bytes" #: src/buffer.c:664 msgid "(pipe)" msgstr "(pipe)" #: src/buffer.c:686 msgid "Refusing to read archive contents from terminal (missing -f option?)" msgstr "Verweigere, Archivinhalt vom Terminal zu lesen (fehlt Option -f?)" #: src/buffer.c:688 msgid "Refusing to write archive contents to terminal (missing -f option?)" msgstr "Verweigere, Archivinhalt aufs Terminal zu schreiben (fehlt Option -f?)" #: src/buffer.c:741 msgid "Invalid value for record_size" msgstr "Ungültiger Wert für „record_size“." #: src/buffer.c:744 msgid "No archive name given" msgstr "Kein Archivname angegeben" #: src/buffer.c:787 msgid "Cannot verify stdin/stdout archive" msgstr "Kann Archive auf Standard-Ein-/Ausgabe nicht prüfen." #: src/buffer.c:799 #, c-format msgid "Archive is compressed. Use %s option" msgstr "Archiv ist komprimiert. Benutzen Sie die Option %s." #: src/buffer.c:854 src/tar.c:2597 msgid "Cannot update compressed archives" msgstr "Kann komprimierte Archive nicht aktualisieren" #: src/buffer.c:941 msgid "At beginning of tape, quitting now" msgstr "Am Anfang des Mediums, beende jetzt." #: src/buffer.c:947 msgid "Too many errors, quitting" msgstr "Zu viele Fehler, beende." #: src/buffer.c:977 #, fuzzy, c-format #| msgid "Record size = %lu block" #| msgid_plural "Record size = %lu blocks" msgid "Record size = %td block" msgid_plural "Record size = %td blocks" msgstr[0] "Recordgröße = %lu Block" msgstr[1] "Recordgröße = %lu Blöcke" #: src/buffer.c:1001 #, fuzzy, c-format #| msgid "Unaligned block (%lu byte) in archive" #| msgid_plural "Unaligned block (%lu bytes) in archive" msgid "Unaligned block (%td byte) in archive" msgid_plural "Unaligned block (%td bytes) in archive" msgstr[0] "Falsch ausgerichteter Block (ein Byte) im Archiv." msgstr[1] "Falsch ausgerichteter Block (%lu Bytes) im Archiv." #: src/buffer.c:1078 msgid "Cannot backspace archive file; it may be unreadable without -i" msgstr "Kann Archiv-Datei nicht zurücksetzen; könnte ohne „-i“ unlesbar sein." #: src/buffer.c:1117 msgid "rmtlseek not stopped at a record boundary" msgstr "„rmtlseek“ nicht an Recordgrenze angehalten" #: src/buffer.c:1178 #, c-format msgid "%s: contains invalid volume number" msgstr "%s: enthält ungültige Teil-Nummer." #: src/buffer.c:1225 #, fuzzy, c-format #| msgid "Prepare volume #%d for %s and hit return: " msgid "Prepare volume #%jd for %s and hit return: " msgstr "Medium #%d für %s einlegen und Eingabetaste drücken: " #: src/buffer.c:1231 msgid "EOF where user reply was expected" msgstr "Dateiende gefunden, Benutzereingabe erwartet" #: src/buffer.c:1236 src/buffer.c:1268 msgid "WARNING: Archive is incomplete" msgstr "WARNUNG: Archiv unvollständig" #: src/buffer.c:1250 #, c-format msgid "" " n name Give a new file name for the next (and subsequent) volume(s)\n" " q Abort tar\n" " y or newline Continue operation\n" msgstr "" " n Name für die nächsten (und folgenden) Medien neuen Dateinamen angeben\n" " q „tar“ abbrechen\n" " j oder Enter fortfahren\n" #: src/buffer.c:1255 #, c-format msgid " ! Spawn a subshell\n" msgstr " ! Shell in einem Unterprozess starten\n" #: src/buffer.c:1256 #, c-format msgid " ? Print this list\n" msgstr " ? diese Liste ausgeben\n" #: src/buffer.c:1263 msgid "No new volume; exiting.\n" msgstr "Kein neues Medium; halte an.\n" #: src/buffer.c:1297 msgid "File name not specified. Try again.\n" msgstr "Dateiname nicht angegeben. Versuchen Sie es noch einmal.\n" #: src/buffer.c:1309 #, c-format msgid "Invalid input. Type ? for help.\n" msgstr "Ungültige Eingabe. Geben Sie „?“ für Hilfe ein.\n" #: src/buffer.c:1326 msgid "Volume number overflow" msgstr "Teil-Nummer zu groß." #: src/buffer.c:1363 #, c-format msgid "%s command failed" msgstr "„%s“-Befehl gescheitert." #: src/buffer.c:1538 src/buffer.c:1555 #, c-format msgid "%s is not continued on this volume" msgstr "Dieser Teil ist keine Fortsetzung von %s." #: src/buffer.c:1550 #, c-format msgid "%s is possibly continued on this volume: header contains truncated name" msgstr "%s wird möglicherweise auf diesem Teil fortgesetzt: Kopf enthält abgeschnittenen Namen." #: src/buffer.c:1565 #, fuzzy, c-format #| msgid "%s is the wrong size (%s != %s + %s)" msgid "%s is the wrong size (%jd != %jd + %jd)" msgstr "%s hat die falsche Größe (%s != %s + %s)." #: src/buffer.c:1576 #, fuzzy, c-format #| msgid "This volume is out of sequence (%s - %s != %s)" msgid "This volume is out of sequence (%jd - %jd != %jd)" msgstr "Dieser Teil ist nicht an der Reihe (%s - %s != %s)." #: src/buffer.c:1641 src/buffer.c:1659 #, c-format msgid "Archive not labeled to match %s" msgstr "Kennzeichnung des Archivs passt nicht zu „%s“." #: src/buffer.c:1663 #, c-format msgid "Volume %s does not match %s" msgstr "Teil „%s“ passt nicht zu „%s“." #: src/buffer.c:1754 #, c-format msgid "%s: file name too long to be stored in a GNU multivolume header, truncated" msgstr "%s: Dateiname zu lang, um in einem GNU-Mehrteil-Kopf abgelegt werden zu können, abgeschnitten" #: src/buffer.c:1920 msgid "write did not end on a block boundary" msgstr "Schreiben endete nicht an Blockgrenze" #: src/compare.c:101 #, fuzzy, c-format #| msgid "Could only read %lu of %lu byte" #| msgid_plural "Could only read %lu of %lu bytes" msgid "Could read only %td of %td byte" msgid_plural "Could read only %td of %td bytes" msgstr[0] "Konnte nur %lu von %lu Byte lesen" msgstr[1] "Konnte nur %lu von %lu Bytes lesen" #: src/compare.c:111 src/compare.c:391 msgid "Contents differ" msgstr "Unterschiedliche Inhalte" #: src/compare.c:133 src/extract.c:1346 src/incremen.c:1519 src/list.c:483 #: src/list.c:1400 src/xheader.c:794 msgid "Unexpected EOF in archive" msgstr "Unerwartetes Dateiende im Archiv." #: src/compare.c:175 src/compare.c:191 src/compare.c:305 src/compare.c:412 msgid "File type differs" msgstr "Unterschiedliche Dateitypen" #: src/compare.c:178 src/compare.c:198 src/compare.c:319 msgid "Mode differs" msgstr "Modus ist unterschiedlich" #: src/compare.c:201 msgid "Uid differs" msgstr "Benutzerkennung ist unterschiedlich" #: src/compare.c:203 msgid "Gid differs" msgstr "Gruppenkennung ist unterschiedlich" #: src/compare.c:207 msgid "Mod time differs" msgstr "Änderungszeit ist unterschiedlich" #: src/compare.c:211 src/compare.c:423 msgid "Size differs" msgstr "Größe ist unterschiedlich" #: src/compare.c:257 #, c-format msgid "Not linked to %s" msgstr "Nicht mit „%s“ verknüpft" #: src/compare.c:282 msgid "Symlink differs" msgstr "Symbolische Verknüpfung ist unterschiedlich" #: src/compare.c:313 msgid "Device number differs" msgstr "Unterschiedliche Gerätenummern" #: src/compare.c:463 #, c-format msgid "Verify " msgstr "Prüfe " #: src/compare.c:470 #, c-format msgid "%s: Unknown file type '%c', diffed as normal file" msgstr "%s: Unbekannter Dateityp „%c“, Differenz wie für eine normale Datei." #: src/compare.c:523 msgid "Archive contains file names with leading prefixes removed." msgstr "Archiv enthält Dateinamen, deren Präfixe entfernt wurden." #: src/compare.c:528 msgid "Archive contains transformed file names." msgstr "Archiv enthält transformierte Dateinamen." #: src/compare.c:532 msgid "Verification may fail to locate original files." msgstr "Die Überprüfung findet möglicherweise die Originaldateien nicht." #: src/compare.c:587 #, fuzzy, c-format #| msgid "VERIFY FAILURE: %d invalid header detected" #| msgid_plural "VERIFY FAILURE: %d invalid headers detected" msgid "VERIFY FAILURE: %jd invalid header detected" msgid_plural "VERIFY FAILURE: %jd invalid headers detected" msgstr[0] "FEHLER BEI PRÜFUNG: %d ungültiger Kopfteil erkannt." msgstr[1] "FEHLER BEI PRÜFUNG: %d ungültige Kopfteile erkannt." #: src/compare.c:604 src/list.c:251 #, fuzzy, c-format #| msgid "A lone zero block at %s" msgid "A lone zero block at %jd" msgstr "Ein einzelner Nullblock bei %s" #: src/create.c:74 #, c-format msgid "%s: contains a cache directory tag %s; %s" msgstr "%s: enthält eine „Cache-Verzeichnis“-Markierung %s; %s" #: src/create.c:245 #, fuzzy, c-format #| msgid "value %s out of %s range %s..%s; substituting %s" msgid "value %s%ju out of %s range %jd..%ju; substituting %s%ju" msgstr "Wert %s außerhalb des %s-Bereich %s..%s; ersetze durch %s" #: src/create.c:251 #, fuzzy, c-format #| msgid "value %s out of %s range %s..%s" msgid "value %s%ju out of %s range %jd..%ju" msgstr "Wert %s außerhalb des %s-Bereichs %s..%s" #: src/create.c:311 msgid "Generating negative octal headers" msgstr "Erzeuge negative oktale Kopfteile" #: src/create.c:578 src/create.c:640 #, c-format msgid "%s: file name is too long (max %d); not dumped" msgstr "%s: Dateiname ist zu lang (max. %d); nicht gesichert." #: src/create.c:588 #, c-format msgid "%s: file name is too long (cannot be split); not dumped" msgstr "%s: Dateiname ist zu lang (kann nicht aufgeteilt werden); nicht gesichert." #: src/create.c:614 #, c-format msgid "%s: link name is too long; not dumped" msgstr "%s: Verknüpfungsname ist zu lang; nicht gesichert." #: src/create.c:1156 #, c-format msgid "%s: file is on a different filesystem; not dumped" msgstr "Datei %s liegt auf einem anderen Dateisystem; nicht gesichert." #: src/create.c:1197 src/create.c:1208 src/incremen.c:661 src/incremen.c:668 msgid "contents not dumped" msgstr "Inhalt nicht gesichert" #: src/create.c:1408 #, c-format msgid "%s: Unknown file type; file ignored" msgstr "%s: Unbekannter Dateityp; Datei ignoriert." #: src/create.c:1518 #, c-format msgid "Missing links to %s." msgstr "Fehlende Verknüpfungen zu %s." #: src/create.c:1675 #, c-format msgid "%s: file is unchanged; not dumped" msgstr "Datei %s ist unverändert; nicht gesichert." #: src/create.c:1684 #, c-format msgid "%s: archive cannot contain itself; not dumped" msgstr "%s: Archiv kann sich nicht selbst enthalten; nicht gesichert." #: src/create.c:1711 src/incremen.c:654 msgid "directory not dumped" msgstr "Verzeichnis nicht gesichert" #: src/create.c:1805 #, c-format msgid "%s: file changed as we read it" msgstr "%s: Datei hat sich beim Lesen geändert." #: src/create.c:1880 #, c-format msgid "%s: socket ignored" msgstr "%s: Socket ignoriert" #: src/create.c:1885 #, c-format msgid "%s: door ignored" msgstr "%s: Klappe ignoriert" #: src/delete.c:212 src/list.c:287 src/update.c:191 msgid "Skipping to next header" msgstr "Springe zum nächsten Kopfteil." #: src/delete.c:351 msgid "Deleting non-header from archive" msgstr "Lösche nicht-Kopfteil aus dem Archiv" #: src/extract.c:372 #, c-format msgid "%s: implausibly old time stamp %s" msgstr "%s: unplausibel alter Zeitstempel %s" #: src/extract.c:389 #, c-format msgid "%s: time stamp %s is %s s in the future" msgstr "%s: Zeitstempel %s liegt %s Sekunden in der Zukunft." #: src/extract.c:683 #, c-format msgid "%s: Unexpected inconsistency when making directory" msgstr "%s: Unerwarteter Inkonsitenz beim Erstellen des Verzeichnisses." #: src/extract.c:919 #, c-format msgid "%s: skipping existing file" msgstr "%s: überspringe existierende Datei" #: src/extract.c:1028 #, c-format msgid "%s: Directory renamed before its status could be extracted" msgstr "%s: Verzeichnis umbenannt bevor sein Status ermittelt werden konnte" #: src/extract.c:1229 msgid "Extracting contiguous files as regular files" msgstr "Extrahiere zusammenhängende Dateien („contiguous files“) als reguläre." #: src/extract.c:1615 msgid "Attempting extraction of symbolic links as hard links" msgstr "Versuche symbolische Verknüpfungen als harte Verknüpfungen herauszuholen." #: src/extract.c:1755 #, c-format msgid "%s: Cannot extract -- file is continued from another volume" msgstr "Kann „%s“ nicht herausholen – Datei ist Fortsetzung eines anderen Teils." #: src/extract.c:1761 src/list.c:1150 msgid "Unexpected long name header" msgstr "Unerwarteter Kopfteil mit langem Namen" #: src/extract.c:1766 #, c-format msgid "%s: Unknown file type '%c', extracted as normal file" msgstr "%s: Unbekannter Dateityp „%c“, wie normale Datei extrahiert." #: src/extract.c:1795 #, c-format msgid "Current %s is newer or same age" msgstr "Aktuelles %s ist neuer oder hat dasselbe Alter." #: src/extract.c:1822 #, c-format msgid "%s: Member name contains '..'" msgstr "%s: Elementname enthält „..“" #: src/extract.c:1853 #, c-format msgid "%s: Was unable to backup this file" msgstr "%s: Konnte keine Sicherheitskopie von dieser Datei erstellen" #: src/extract.c:2021 #, c-format msgid "Cannot rename %s to %s" msgstr "Kann %s nicht in %s umbenennen." #: src/incremen.c:543 src/incremen.c:586 #, c-format msgid "%s: Directory has been renamed from %s" msgstr "%s: Verzeichnis wurde von „%s“ umbenannt." #: src/incremen.c:599 #, c-format msgid "%s: Directory is new" msgstr "Verzeichnis „%s“ ist neu." #: src/incremen.c:618 #, c-format msgid "%s: directory is on a different filesystem; not dumped" msgstr "Verzeichnis %s liegt auf einem anderen Dateisystem; nicht gesichert." #: src/incremen.c:638 #, c-format msgid "%s: Directory has been renamed" msgstr "%s: Verzeichnis wurde umbenannt." #: src/incremen.c:1042 src/incremen.c:1055 msgid "Invalid time stamp" msgstr "Ungültiger Zeitstempel" #: src/incremen.c:1084 msgid "Invalid modification time" msgstr "Ungültige Änderungszeit" #: src/incremen.c:1092 msgid "Invalid modification time (nanoseconds)" msgstr "Ungültige Änderungszeit (Nanosekunden)." #: src/incremen.c:1106 msgid "Invalid device number" msgstr "Ungültige Gerätenummer" #: src/incremen.c:1114 msgid "Invalid inode number" msgstr "Ungültige Inode-Nummer" #: src/incremen.c:1165 #, fuzzy, c-format #| msgid "%s: byte %s: %s %.*s... too long" msgid "%s: byte %jd: %s %.*s... too long" msgstr "%s: Byte %s: %s %.*s... zu lang" #: src/incremen.c:1181 src/incremen.c:1228 src/incremen.c:1289 msgid "Unexpected EOF in snapshot file" msgstr "Unerwartetes Dateiende im Schnappschussdatei." #: src/incremen.c:1188 #, fuzzy, c-format #| msgid "%s: byte %s: %s %s followed by invalid byte 0x%02x" msgid "%s: byte %jd: %s %s followed by invalid byte 0x%02x" msgstr "%s: Byte %s: %s %s gefolgt von ungültigem Byte 0x%02x" #: src/incremen.c:1198 #, fuzzy, c-format #| msgid "%s: byte %s: %s %s" msgid "%s: byte %jd: %s %s" msgstr "%s: Byte %s: %s %s" #: src/incremen.c:1202 #, fuzzy, c-format #| msgid "" #| "%s: byte %s: (valid range %s..%s)\n" #| "\t%s %s" msgid "" "%s: byte %jd: (valid range %jd..%ju)\n" "\t%s %s" msgstr "" "%s: Byte %s: (gültiger Bereich %s..%s)\n" "\t%s %s" #: src/incremen.c:1279 #, c-format msgid "%s: byte %s: %s" msgstr "%s: Byte %s: %s" #: src/incremen.c:1282 msgid "Missing record terminator" msgstr "Fehlender Record-Abschluss" #: src/incremen.c:1387 src/incremen.c:1390 msgid "Bad incremental file format" msgstr "Unzulässiges inkrementelles Dateiformat" #: src/incremen.c:1395 #, fuzzy, c-format #| msgid "Unsupported incremental format version: %" msgid "Unsupported incremental format version: %s" msgstr "Nicht unterstützte Version des inkrementellen Formats: %" #: src/incremen.c:1558 #, c-format msgid "Malformed dumpdir: expected '%c' but found %#3o" msgstr "Fehlgeformtes Verzeichnis für Dump: „%c“ erwartet, aber %#3o gefunden" #: src/incremen.c:1567 msgid "Malformed dumpdir: 'X' duplicated" msgstr "Fehlgeformtes Verzeichnis für Dump: „X“ dupliziert" #: src/incremen.c:1579 msgid "Malformed dumpdir: empty name in 'R'" msgstr "Fehlgeformtes Verzeichnis für Dump: leerer Name in „R“" #: src/incremen.c:1591 msgid "Malformed dumpdir: 'T' not preceded by 'R'" msgstr "Fehlgeformtes Verzeichnis für Dump: „T“ folgt nicht auf „R“" #: src/incremen.c:1596 msgid "Malformed dumpdir: empty name in 'T'" msgstr "Fehlgeformtes Verzeichnis für Dump: leerer Name in „T“" #: src/incremen.c:1615 #, c-format msgid "Malformed dumpdir: expected '%c' but found end of data" msgstr "Fehlgeformtes Verzeichnis für Dump: „%c“ erwartet, aber Ende der Daten gefunden" #: src/incremen.c:1620 msgid "Malformed dumpdir: 'X' never used" msgstr "Fehlgeformtes Verzeichnis für Dump: „X“ nie benutzt" #: src/incremen.c:1663 #, c-format msgid "Cannot create temporary directory using template %s" msgstr "Kann kein temporäres Verzeichnis mit der Schablone %s anlegen" #: src/incremen.c:1724 #, c-format msgid "%s: Not purging directory: unable to stat" msgstr "%s: Entferne Verzeichnis nicht: kann nicht zugreifen" #: src/incremen.c:1736 #, c-format msgid "%s: directory is on a different device: not purging" msgstr "%s: Verzeichnis liegt auf einem anderen Dateisystem: entferne nicht." #: src/incremen.c:1744 #, c-format msgid "%s: Deleting %s\n" msgstr "%s: Lösche %s.\n" #: src/incremen.c:1747 #, c-format msgid "%s: Cannot remove" msgstr "%s: Kann nicht entfernen." #: src/list.c:222 #, c-format msgid "%s: Omitting" msgstr "%s: Ausgelassen" #: src/list.c:240 #, fuzzy, c-format #| msgid "block %s: ** Block of NULs **\n" msgid "block %jd: ** Block of NULs **\n" msgstr "Block %s: ** Block aus NULlen **\n" #: src/list.c:261 #, fuzzy, c-format #| msgid "Terminating zero blocks missing at %s" msgid "Terminating zero blocks missing at %jd" msgstr "Abschließende Nullblocks fehlen bei %s" #: src/list.c:264 #, fuzzy, c-format #| msgid "block %s: ** End of File **\n" msgid "block %jd: ** End of File **\n" msgstr "Block %s: ** Ende der Datei **\n" #: src/list.c:284 src/list.c:1119 src/list.c:1360 #, fuzzy, c-format #| msgid "block %s: " msgid "block %jd: " msgstr "Block %s: " #. TRANSLATORS: %s is type of the value (gid_t, uid_t, #. etc.) #: src/list.c:759 #, c-format msgid "Blanks in header where numeric %s value expected" msgstr "Leerzeichen im Kopfteil, wo numerische %s-Werte stehen sollten." #. TRANSLATORS: Second %s is a type name #. (gid_t, uid_t, etc.). #: src/list.c:814 #, c-format msgid "Archive octal value %.*s is out of %s range; assuming two's complement" msgstr "Oktalzahl %.*s außerhalb des %s-Bereichs, nehme Zweierkomplement an" #. TRANSLATORS: Second %s is a type name #. (gid_t, uid_t, etc.). #: src/list.c:830 #, c-format msgid "Archive octal value %.*s is out of %s range" msgstr "Oktalzahl %.*s außerhalb des %s-Bereichs" #: src/list.c:851 msgid "Archive contains obsolescent base-64 headers" msgstr "Archiv enthält veraltete Base64-Kopfteile" #: src/list.c:864 #, c-format msgid "Archive signed base-64 string %s is out of %s range" msgstr "Base64-Text %s außerhalb des %s-Bereichs" #: src/list.c:896 #, c-format msgid "Archive base-256 value is out of %s range" msgstr "Base-256-Wert ist außerhalb des %s-Bereichs" #. TRANSLATORS: Second %s is a type name #. (gid_t, uid_t, etc.). #: src/list.c:927 #, c-format msgid "Archive contains %.*s where numeric %s value expected" msgstr "Archiv enthält „%.*s“ wo numerische %s-Werte stehen sollten" #. TRANSLATORS: Second %s is type name (gid_t,uid_t,etc.) #: src/list.c:942 #, fuzzy, c-format #| msgid "Archive value %s is out of %s range %s..%s" msgid "Archive value %s%ju is out of %s range %jd..%ju" msgstr "Wert %s außerhalb des %s-Bereichs %s..%s" #: src/list.c:1267 #, fuzzy #| msgid " link to %s\n" msgid " link to " msgstr " Verknüpfung zu %s\n" #: src/list.c:1286 #, c-format msgid "--Long Link--\n" msgstr "––Lange Verknüpfung––\n" #: src/list.c:1290 #, c-format msgid "--Long Name--\n" msgstr "––Langer Name––\n" # Alte Üs: Band Kopfteil. Kann diese Meldung auch bei Disketten # ausgegeben werden? Dann kann man ja nicht "Band" sagen; am besten # einfach "Volume" lassen. ke. #: src/list.c:1294 #, c-format msgid "--Volume Header--\n" msgstr "––Vorspann des Teils––\n" #: src/list.c:1298 #, fuzzy, c-format #| msgid "--Continued at byte %s--\n" msgid "--Continued at byte %jd--\n" msgstr "––Fortgesetzt bei Byte %s––\n" #: src/list.c:1303 #, c-format msgid " unknown file type %s\n" msgstr " unbekannter Dateityp %s\n" #: src/list.c:1364 msgid "Creating directory:" msgstr "Erzeuge Verzeichnis:" #: src/misc.c:787 #, c-format msgid "Renaming %s to %s\n" msgstr "Benenne „%s“ in „%s“ um\n" #: src/misc.c:796 src/misc.c:815 #, c-format msgid "%s: Cannot rename to %s" msgstr "%s: Kann nicht in %s umbenennen" #: src/misc.c:820 #, c-format msgid "Renaming %s back to %s\n" msgstr "Benenne „%s“ zurück in „%s“\n" #: src/misc.c:1201 #, c-format msgid "%s: File removed before we read it" msgstr "%s: Datei gelöscht, bevor sie gelesen wurde" #: src/misc.c:1215 msgid "child process" msgstr "Kindprozess" #: src/misc.c:1224 msgid "interprocess channel" msgstr "Interprocess-Kanal" #: src/names.c:77 msgid "Local file name selection:" msgstr "Auswahl der lokalen Dateinamen:" #: src/names.c:80 msgid "add given FILE to the archive (useful if its name starts with a dash)" msgstr "angegebene Datei zum Archiv hinzufügen (nützlich, wenn Datei mit einem Strich beginnt)" #: src/names.c:81 src/tar.c:619 msgid "DIR" msgstr "VERZEICHNIS" #: src/names.c:82 msgid "change to directory DIR" msgstr "zu VERZEICHNIS wechseln" #: src/names.c:84 msgid "get names to extract or create from FILE" msgstr "Namen der zu bearbeitenden Dateien aus DATEI lesen" #: src/names.c:86 msgid "-T reads null-terminated names; implies --verbatim-files-from" msgstr "-T liest null-terminierte Namen; impliziert --verbatim-files-from" #: src/names.c:89 msgid "disable the effect of the previous --null option" msgstr "die Wirkung der vorangehenden Option --null aufheben" #: src/names.c:91 msgid "unquote input file or member names (default)" msgstr "Namen von Eingabedateien oder Bestandteilen von Zitat befreien (Voreinstellung)" #: src/names.c:93 msgid "do not unquote input file or member names" msgstr "Namen von Eingabedateien oder Bestandteilen nicht von Zitat befreien" #: src/names.c:95 msgid "-T reads file names verbatim (no escape or option handling)" msgstr "-T liest Dateinamen wortwörtlich (keine Behandlung von Escapes oder Optionen)" #: src/names.c:97 msgid "-T treats file names starting with dash as options (default)" msgstr "-T behandelt Dateinamen, die mit Strich beginnen, als Optionen (Voreinstellung)" #: src/names.c:99 tests/genfile.c:134 msgid "PATTERN" msgstr "MUSTER" #: src/names.c:100 msgid "exclude files, given as a PATTERN" msgstr "Dateien auslassen, auf die MUSTER passt" #: src/names.c:102 msgid "exclude patterns listed in FILE" msgstr "Dateien auslassen, auf die in DATEI angegebene Muster passen" #: src/names.c:104 msgid "exclude contents of directories containing CACHEDIR.TAG, except for the tag file itself" msgstr "Inhalt von Verzeichnissen auslassen, die CACHEDIR.TAG enthalten, außer der Markierungsdatei selbst" #: src/names.c:107 msgid "exclude everything under directories containing CACHEDIR.TAG" msgstr "alles unterhalb von Verzeichnissen auslassen, die CACHEDIR.TAG enthalten" #: src/names.c:110 msgid "exclude directories containing CACHEDIR.TAG" msgstr "Verzeichnisse auslassen, die CACHEDIR.TAG enthalten" #: src/names.c:112 msgid "exclude contents of directories containing FILE, except for FILE itself" msgstr "Inhalt von Verzeichnissen auslassen, die DATEI enthalten, außer DATEI selbst" #: src/names.c:115 msgid "read exclude patterns for each directory from FILE, if it exists" msgstr "Ausschlussmuster für jedes Verzeichnis aus DATEI lesen, wenn sie existiert" #: src/names.c:118 msgid "read exclude patterns for each directory and its subdirectories from FILE, if it exists" msgstr "Ausschlussmuster für jedes Verzeichnis und seine Unterverzeichnisse aus DATEI lesen, wenn sie existiert" #: src/names.c:121 msgid "exclude everything under directories containing FILE" msgstr "alles unterhalb von Verzeichnissen auslassen, die DATEI enthalten" #: src/names.c:123 msgid "exclude directories containing FILE" msgstr "Verzeichnisse auslassen, die DATEI enthalten" #: src/names.c:125 msgid "exclude version control system directories" msgstr "Verzeichnisse von Versionskontrollsystemen auslassen" #: src/names.c:127 msgid "read exclude patterns from the VCS ignore files" msgstr "Ausschlussmuster aus der VCS-Ignorierdatei lesen" #: src/names.c:129 msgid "exclude backup and lock files" msgstr "Backup- und Lock-Dateien ausschließen" #: src/names.c:131 msgid "recurse into directories (default)" msgstr "in Verzeichnisse absteigen (Voreinstellung)" #: src/names.c:133 msgid "avoid descending automatically in directories" msgstr "automatischen Abstieg in Vezeichnisse vermeiden" #: src/names.c:136 msgid "File name matching options (affect both exclude and include patterns):" msgstr "Dateinamenauswahloptionen (sowohl für ein- als auch ausschließende Muster):" #: src/names.c:139 msgid "patterns match file name start" msgstr "Muster am Dateinamensanfang ausrichten" #: src/names.c:141 msgid "patterns match after any '/' (default for exclusion)" msgstr "Muster passen nach jedem „/“ (Voreinstellung beim Ausschluss)" #: src/names.c:143 msgid "ignore case" msgstr "Groß-/Kleinschreibung ignorieren" #: src/names.c:145 msgid "case sensitive matching (default)" msgstr "Groß-/Kleinschreibung beachten (Voreinstellung)" #: src/names.c:147 msgid "use wildcards (default for exclusion)" msgstr "Muster benutzen (Voreinstellung für Ausschluss)" #: src/names.c:149 msgid "verbatim string matching" msgstr "Zeichenketten sind buchstabengetreu" #: src/names.c:151 msgid "wildcards match '/' (default for exclusion)" msgstr "Jokerzeichen passen auf „/“ (Voreinstellung für Ausschluss)" #: src/names.c:153 msgid "wildcards do not match '/'" msgstr "Jokerzeichen passen nicht auf „/“" #: src/names.c:210 #, fuzzy, c-format #| msgid "%s:%lu: unrecognized option" msgid "%s:%jd: unrecognized option" msgstr "%s:%lu: unbekannte Option" #: src/names.c:753 msgid "The following options were used after non-option arguments. These options are positional and affect only arguments that follow them. Please, rearrange them properly." msgstr "Die folgenden Optionen wurden nach Argumenten, die keine Optionen sind, angegeben. Diese Optionen sind positionsabhängig und haben nur auf Argumente Einfluss, die hinter ihnen stehen. Bitte ordnen Sie sie entsprechend an." #: src/names.c:767 #, c-format msgid "-C %s has no effect" msgstr "-C %s hat keinen Einfluss" #: src/names.c:772 #, c-format msgid "--%s %s has no effect" msgstr "--%s %s hat keinen Einfluss" #: src/names.c:776 #, c-format msgid "--%s has no effect" msgstr "--%s hat keinen Einfluss" #: src/names.c:903 msgid "command line" msgstr "Kommandozeile" #: src/names.c:920 #, c-format msgid "%s: file list requested from %s already read from %s" msgstr "%s: Dateiliste, die von %s angefordert wurde, wurde schon von %s gelesen" #: src/names.c:999 src/checkpoint.c:283 #, c-format msgid "cannot split string '%s': %s" msgstr "kann Zeichenkette „%s“ nicht zerteilen: %s" #: src/names.c:1003 src/tar.c:2344 #, fuzzy #| msgid "too many arguments" msgid "too many options" msgstr "zu viele Argumente" #: src/names.c:1049 #, c-format msgid "%s: file name read contains nul character" msgstr "%s: gelesener Dateiname enthält ein NULL-Zeichen" #: src/names.c:1442 msgid "Pattern matching characters used in file names" msgstr "Zeichen für Musterüberdeckung im Dateinamen benutzt" #: src/names.c:1443 msgid "Use --wildcards to enable pattern matching, or --no-wildcards to suppress this warning" msgstr "" "Benutzen Sie --wildcards, um Musterüberdeckung zu ermöglichen oder\n" "--no-wildcards, um diese Warnung zu unterdrücken." #: src/names.c:1462 src/names.c:1478 #, c-format msgid "%s: Not found in archive" msgstr "%s: Nicht im Archiv gefunden." #: src/names.c:1463 #, c-format msgid "%s: Required occurrence not found in archive" msgstr "%s: Erforderliches Auftreten nicht im Archiv gefunden." #: src/names.c:1496 #, c-format msgid "Archive label mismatch" msgstr "Kennzeichnung des Archivs passt nicht" #: src/names.c:1765 msgid "Using -C option inside file list is not allowed with --listed-incremental" msgstr "Option -C in Dateiliste ist nicht erlaubt mit --listed-incremental" #: src/names.c:1770 msgid "Only one -C option is allowed with --listed-incremental" msgstr "In --listed-incremental ist nur eine Option -C erlaubt" #: src/tar.c:170 #, c-format msgid "Options '%s' and '%s' both want standard input" msgstr "Sowohl Option „%s“ als auch „%s“ verlangen Standard-Eingabe." #: src/tar.c:245 #, c-format msgid "%s: Invalid archive format" msgstr "%s: Ungültiges Archivformat" #: src/tar.c:280 msgid "GNU features wanted on incompatible archive format" msgstr "GNU-Erweiterungen bei einem inkompatiblen Archiv-Format verlangt" #: src/tar.c:345 #, c-format msgid "Unknown quoting style '%s'. Try '%s --quoting-style=help' to get a list." msgstr "Unbekannter Zitatstil „%s“. Versuchen Sie „%s --quoting-style=help“ für eine Liste." #: src/tar.c:439 msgid "" "GNU 'tar' saves many files together into a single tape or disk archive, and can restore individual files from the archive.\n" "\n" "Examples:\n" " tar -cf archive.tar foo bar # Create archive.tar from files foo and bar.\n" " tar -tvf archive.tar # List all files in archive.tar verbosely.\n" " tar -xf archive.tar # Extract all files from archive.tar.\n" msgstr "" "GNU „tar“ fasst viele Dateien in einem einzigen Archiv auf Platte oder Band zusammen und kann einzelne Dateien aus dem Archiv wieder herstellen.\n" "\n" "Beispiele:\n" " tar -cf archiv.tar foo bar # archiv.tar mit den Dateien foo und bar erzeugen\n" " tar -tvf archiv.tar # Inhalt von archiv.tar ausführlich anzeigen\n" " tar -xf archiv.tar # alle Dateien aus archiv.tar extrahieren\n" #: src/tar.c:448 msgid "" "The backup suffix is '~', unless set with --suffix or SIMPLE_BACKUP_SUFFIX.\n" "The version control may be set with --backup or VERSION_CONTROL, values are:\n" "\n" " none, off never make backups\n" " t, numbered make numbered backups\n" " nil, existing numbered if numbered backups exist, simple otherwise\n" " never, simple always make simple backups\n" msgstr "" "Die Namenserweiterung für Sicherheitskopien ist „~“, wenn nicht mit --suffix\n" "oder der Umgebungsvariablen SIMPLE_BACKUP_SUFFIX etwas anderes eingestellt ist.\n" "Die Versionskontrolle kann mit --backup oder der Umgebungsvariablen\n" "VERSION_CONTROL gesetzt werden. Mögliche Werte sind:\n" "\n" " none, off niemals Sicherheitskopien anlegen\n" " t, numbered nummerierte Sicherheitskopien\n" " nil, existing nummerierte Sicherheitskopien, wenn schon nummerierte\n" " vorhanden sind, sonst einfache\n" " never, simple immer einfache Sicherheitskopien\n" #: src/tar.c:531 msgid "Main operation mode:" msgstr "Hauptsächlicher Arbeitsmodus:" #: src/tar.c:534 msgid "list the contents of an archive" msgstr "den Inhalt eines Archivs auflisten" #: src/tar.c:536 msgid "extract files from an archive" msgstr "Dateien aus einem Archiv extrahieren" #: src/tar.c:539 msgid "create a new archive" msgstr "ein neues Archiv anlegen" #: src/tar.c:541 msgid "find differences between archive and file system" msgstr "Unterschiede zwischen Archiv und Dateisystem suchen" #: src/tar.c:544 msgid "append files to the end of an archive" msgstr "Dateien hinten an das Archiv anfügen" #: src/tar.c:546 msgid "only append files newer than copy in archive" msgstr "nur Dateien anfügen, die neuer als die Kopie im Archiv sind" #: src/tar.c:548 msgid "append tar files to an archive" msgstr "tar-Dateien an ein Archiv anfügen" #: src/tar.c:551 msgid "delete from the archive (not on mag tapes!)" msgstr "aus dem Archiv löschen (nicht auf Magnetband!)" #: src/tar.c:553 msgid "test the archive volume label and exit" msgstr "den Archiv-Teil-Namen überprüfen und beenden" #: src/tar.c:556 msgid "Operation modifiers:" msgstr "Feineinstellungen:" #: src/tar.c:559 msgid "handle sparse files efficiently" msgstr "löchrige Dateien („sparse files“) effizient behandeln" #: src/tar.c:560 msgid "TYPE" msgstr "TYP" #: src/tar.c:561 msgid "technique to detect holes" msgstr "Technik zur Löchererkennung" #: src/tar.c:562 msgid "MAJOR[.MINOR]" msgstr "MAJOR[.MINOR]" #: src/tar.c:563 msgid "set version of the sparse format to use (implies --sparse)" msgstr "zu benutzende Version des Sparse-Formats setzen (impliziert --sparse)" #: src/tar.c:566 msgid "handle old GNU-format incremental backup" msgstr "inkrementelle Sicherung im alten GNU-Format" #: src/tar.c:568 msgid "handle new GNU-format incremental backup" msgstr "inkrementelle Sicherung im neuen GNU-Format" #: src/tar.c:570 msgid "dump level for created listed-incremental archive" msgstr "Niveau für erzeugte Archive mit --listed-incremental ausgeben" #: src/tar.c:572 msgid "do not exit with nonzero on unreadable files" msgstr "kein Abbruch mit Existatus!=0 bei unlesbaren Dateien" #: src/tar.c:574 msgid "process only the NUMBERth occurrence of each file in the archive; this option is valid only in conjunction with one of the subcommands --delete, --diff, --extract or --list and when a list of files is given either on the command line or via the -T option; NUMBER defaults to 1" msgstr "nur das ZAHLte Auftreten jeder Datei im Archiv bearbeiten; diese Option kann nur zusammen mit einem der Arbeitsmodi --delete, --diff, --extract oder --list und wenn eine Dateiliste entweder auf der Kommandozeile oder mittels der Option -T angegeben wurde benutzt werden; Zahl ist standardmäßig 1" #: src/tar.c:580 msgid "archive is seekable" msgstr "im Archiv kann positioniert werden" #: src/tar.c:582 msgid "archive is not seekable" msgstr "im Archiv kann nicht positioniert werden" #: src/tar.c:584 msgid "do not check device numbers when creating incremental archives" msgstr "Gerätenummer bei Erstellung inkrementeller Archive nicht prüfen" #: src/tar.c:587 msgid "check device numbers when creating incremental archives (default)" msgstr "Gerätenummer bei Erstellung inkrementeller Archive prüfen (Voreinstellung)" #: src/tar.c:591 msgid "Overwrite control:" msgstr "Steuerung des Überschreibens:" #: src/tar.c:594 msgid "attempt to verify the archive after writing it" msgstr "Archiv nach dem Schreiben prüfen" #: src/tar.c:596 msgid "remove files after adding them to the archive" msgstr "Dateien nach dem Hinzufügen zum Archiv löschen" #: src/tar.c:598 msgid "don't replace existing files when extracting, treat them as errors" msgstr "vorhandene Dateien beim Extrahieren nicht überschreiben, sondern als Fehler behandeln" #: src/tar.c:601 msgid "don't replace existing files when extracting, silently skip over them" msgstr "vorhandene Dateien beim Extrahieren nicht überschreiben, kommentarlos überspringen" #: src/tar.c:604 msgid "don't replace existing files that are newer than their archive copies" msgstr "vorhandene Dateien, die neuer als die Archivkopie sind, nicht überschreiben" #: src/tar.c:606 msgid "overwrite existing files when extracting" msgstr "vorhandene Dateien beim Extrahieren überschreiben" #: src/tar.c:608 msgid "remove each file prior to extracting over it" msgstr "zu überschreibende Dateien vor dem Extrahieren löschen" #: src/tar.c:610 msgid "empty hierarchies prior to extracting directory" msgstr "Verzeichnishierarchien rekursiv vor dem Extrahieren eines Verzeichnisses löschen" #: src/tar.c:612 msgid "preserve metadata of existing directories" msgstr "Metadaten existierender Verzeichnisse erhalten" #: src/tar.c:614 msgid "overwrite metadata of existing directories when extracting (default)" msgstr "Metadaten existierender Verzeichnisse beim Extrahieren überschreiben (Voreinstellung)" #: src/tar.c:617 msgid "preserve existing symlinks to directories when extracting" msgstr "vorhandene symbolische Verknüpfungen auf Verzeichnisse beim Extrahieren erhalten" #: src/tar.c:620 msgid "create a subdirectory to avoid having loose files extracted" msgstr "ein Unterverzeichnis anlegen, um keine losen Dateien zu entpacken" #: src/tar.c:624 msgid "Select output stream:" msgstr "Wahl des Ausgabestroms:" #: src/tar.c:627 msgid "extract files to standard output" msgstr "Dateien auf die Standardausgabe extrahieren" #: src/tar.c:628 src/tar.c:650 src/tar.c:737 src/tar.c:740 tests/genfile.c:197 msgid "COMMAND" msgstr "BEFEHL" #: src/tar.c:629 msgid "pipe extracted files to another program" msgstr "extrahierte Dateien an ein anderes Programm weiterreichen" #: src/tar.c:631 msgid "ignore exit codes of children" msgstr "Exitstatus der Kinder ignorieren" #: src/tar.c:633 msgid "treat non-zero exit codes of children as error" msgstr "Exitstatus!=0 von Kindern als Fehler ansehen" #: src/tar.c:636 msgid "Handling of file attributes:" msgstr "Behandlung der Datei-Attribute:" #: src/tar.c:639 msgid "force NAME as owner for added files" msgstr "Eigentümer für hinzugefügte Dateien auf NAME setzen" #: src/tar.c:641 msgid "force NAME as group for added files" msgstr "Gruppe für hinzugefügte Dateien auf NAME setzen" #: src/tar.c:643 msgid "use FILE to map file owner UIDs and names" msgstr "DATEI benutzen, um UIDs und Namen der Besitzer abzubilden" #: src/tar.c:645 msgid "use FILE to map file owner GIDs and names" msgstr "DATEI benutzen, um GIDs und Namen der Besitzer abzubilden" #: src/tar.c:646 src/tar.c:839 msgid "DATE-OR-FILE" msgstr "DATUM-ODER-DATEI" #: src/tar.c:647 msgid "set mtime for added files from DATE-OR-FILE" msgstr "Änderungszeit für hinzugefügte Datei aus DATUM-ODER-DATEI beziehen" #: src/tar.c:649 msgid "only set time when the file is more recent than what was given with --mtime" msgstr "Zeit nur setzen, wenn die Datei neuer ist als der mit --mtime gegebene Wert" #: src/tar.c:651 msgid "use output of the COMMAND to set mtime of the stored archive members" msgstr "" #: src/tar.c:653 src/tar.c:773 tests/genfile.c:152 msgid "FORMAT" msgstr "FORMAT" #: src/tar.c:654 msgid "set output format (in the sense of strptime(3)) of the --set-mtime-command command" msgstr "" #: src/tar.c:655 msgid "CHANGES" msgstr "ÄNDERUNGEN" #: src/tar.c:656 msgid "force (symbolic) mode CHANGES for added files" msgstr "den (symbolischen) Modus ÄNDERUNGEN für hinzugefügte Dateien erzwingen" #: src/tar.c:658 msgid "METHOD" msgstr "METHODE" #: src/tar.c:659 msgid "preserve access times on dumped files, either by restoring the times after reading (METHOD='replace'; default) or by not setting the times in the first place (METHOD='system')" msgstr "Zugriffszeit für abgespeicherte Dateien erhalten, entweder durch Zurücksetzen der Zeiten nach dem Lesen (METHODE=„replace“, Voreinstellung) oder dadurch, dass die Zeiten gar nicht erst neu gesetzt werden (METHODE=„system“)" #: src/tar.c:663 msgid "don't extract file modified time" msgstr "die geänderte Zeit nicht extrahieren" #: src/tar.c:665 msgid "try extracting files with the same ownership as exists in the archive (default for superuser)" msgstr "versuchen, die Dateien mit denselben Eigentumsverhältnisse zu extrahieren (für den Admin ist dies die Voreinstellung)" #: src/tar.c:667 msgid "extract files as yourself (default for ordinary users)" msgstr "Dateien als aktueller Nutzer extrahieren (für normale Nutzer die Voreinstellung)" #: src/tar.c:669 msgid "always use numbers for user/group names" msgstr "immer Zahlen für Nutzer-/Gruppennamen verwenden" #: src/tar.c:671 msgid "extract information about file permissions (default for superuser)" msgstr "Informationen über Dateizugriffsrechte mit extrahieren (Voreinstellung für Root)" #: src/tar.c:675 msgid "apply the user's umask when extracting permissions from the archive (default for ordinary users)" msgstr "die Umask des Nutzers anwenden beim Extrahieren von Dateizugriffsrechte aus dem Archiv (Voreinstellung für normale Nutzer)" #: src/tar.c:677 msgid "member arguments are listed in the same order as the files in the archive" msgstr "Argumente für Elemente werden in der gleichen Anordnung wie die Dateien im Archiv aufgeführt" #: src/tar.c:681 msgid "delay setting modification times and permissions of extracted directories until the end of extraction" msgstr "das Setzen von Zugriffszeiten und Rechten von extrahierten Verzeichnissen verschieben bis zum Ende des Entpackens" #: src/tar.c:684 msgid "cancel the effect of --delay-directory-restore option" msgstr "den Effekt von --delay-directory-restore aufheben" #: src/tar.c:685 msgid "ORDER" msgstr "ANORDNUNG" #: src/tar.c:687 msgid "directory sorting order: none (default), name or inode" msgstr "Sortierreihenfolge für Verzeichnisse: „none“=keine (Voreinstellung), „name“ oder „inode“" #: src/tar.c:689 msgid "directory sorting order: none (default) or name" msgstr "Sortierreihenfolge für Verzeichnisse: „none“=keine (Voreinstellung) oder „name“" #: src/tar.c:694 msgid "Handling of extended file attributes:" msgstr "Behandlung der erweiterten Datei-Attribute:" #: src/tar.c:697 msgid "Enable extended attributes support" msgstr "Unterstützung für erweiterte Attribute ermöglichen" #: src/tar.c:699 msgid "Disable extended attributes support" msgstr "Unterstützung für erweiterte Attribute abschalten" #: src/tar.c:700 src/tar.c:702 msgid "MASK" msgstr "MASKE" #: src/tar.c:701 msgid "specify the include pattern for xattr keys" msgstr "das Einschluss-Muster für xattr-Schlüssel angeben" #: src/tar.c:703 msgid "specify the exclude pattern for xattr keys" msgstr "das Ausschluss-Muster für xattr-Schlüssel angeben" #: src/tar.c:705 msgid "Enable the SELinux context support" msgstr "Unterstützung für SELinux-Kontext ermöglichen" #: src/tar.c:707 msgid "Disable the SELinux context support" msgstr "Unterstützung für SELinux-Kontext abschalten" #: src/tar.c:709 msgid "Enable the POSIX ACLs support" msgstr "Unterstützung für POSIX-ACLs ermöglichen" #: src/tar.c:711 msgid "Disable the POSIX ACLs support" msgstr "Unterstützung für POSIX-ACLs abschalten" #: src/tar.c:714 msgid "Device selection and switching:" msgstr "Geräteauswahl und -umschaltung:" #: src/tar.c:716 msgid "ARCHIVE" msgstr "ARCHIV" #: src/tar.c:717 msgid "use archive file or device ARCHIVE" msgstr "Archivdatei oder Gerät ARCHIV benutzen" #: src/tar.c:721 msgid "specify drive and density" msgstr "Laufwerk und Schreibdichte angeben" #: src/tar.c:735 msgid "archive file is local even if it has a colon" msgstr "Archivdatei ist lokal, auch wenn der Name einen Doppelpunkt enthält" #: src/tar.c:738 msgid "use given rmt COMMAND instead of rmt" msgstr "statt „rmt“ den gegebenen BEFEHL benutzen" #: src/tar.c:741 msgid "use remote COMMAND instead of rsh" msgstr "statt „rsh“ den entfernten BEFEHL benutzen" #: src/tar.c:745 msgid "create/list/extract multi-volume archive" msgstr "mehrteiliges Archiv anlegen/listen/extrahieren" #: src/tar.c:748 msgid "change tape after writing NUMBER x 1024 bytes" msgstr "Medium wechseln, wenn ZAHL × 1024 Bytes geschrieben wurden" #: src/tar.c:751 msgid "run script at end of each tape (implies -M)" msgstr "am Ende jedes Mediums das Skript ausführen (impliziert -M)" #: src/tar.c:755 msgid "use/update the volume number in FILE" msgstr "Teil-Nummer in DATEI benutzen/aktualisieren" #: src/tar.c:759 msgid "Device blocking:" msgstr "Blockung des Gerätes:" #: src/tar.c:761 msgid "BLOCKS" msgstr "BLÖCKE" #: src/tar.c:762 msgid "BLOCKS x 512 bytes per record" msgstr "BLÖCKE × 512 Bytes pro Record" #: src/tar.c:764 msgid "NUMBER of bytes per record, multiple of 512" msgstr "ZAHL Bytes pro Record, Vielfaches von 512" #: src/tar.c:766 msgid "ignore zeroed blocks in archive (means EOF)" msgstr "Blöcke mit Nullen im Archiv ignorieren (heißt EOF)" #: src/tar.c:768 msgid "reblock as we read (for 4.2BSD pipes)" msgstr "erneut Blocken beim Lesen (für 4.2BSD‐Pipes)" #: src/tar.c:771 msgid "Archive format selection:" msgstr "Auswahl des Archiv-Formats:" #: src/tar.c:774 msgid "create archive of the given format" msgstr "Archiv mit dem gegebenen Format anlegen" #: src/tar.c:776 msgid "FORMAT is one of the following:" msgstr "FORMAT ist eines der folgenden:" #: src/tar.c:777 msgid "old V7 tar format" msgstr "altes V7-tar-Format" #: src/tar.c:780 msgid "GNU format as per tar <= 1.12" msgstr "GNU-Format wie mit tar <=1.12" #: src/tar.c:782 msgid "GNU tar 1.13.x format" msgstr "GNU-tar-1.13.x-Format" #: src/tar.c:784 msgid "POSIX 1003.1-1988 (ustar) format" msgstr "Format von POSIX 1003.1-1988 (ustar)" #: src/tar.c:786 msgid "POSIX 1003.1-2001 (pax) format" msgstr "Format von POSIX 1003.1-2001 (pax)" #: src/tar.c:787 msgid "same as pax" msgstr "wie pax" #: src/tar.c:791 msgid "same as --format=v7" msgstr "wie --format=v7" #: src/tar.c:794 msgid "same as --format=posix" msgstr "wie --format=posix" #: src/tar.c:795 msgid "keyword[[:]=value][,keyword[[:]=value]]..." msgstr "Schlüsselwort[[:]=Wert][,Schlüsselwort[[:]=Wert]]..." #: src/tar.c:796 msgid "control pax keywords" msgstr "Pax-Schlüsselwörter steuern" #: src/tar.c:797 msgid "TEXT" msgstr "TEXT" #: src/tar.c:798 msgid "create archive with volume name TEXT; at list/extract time, use TEXT as a globbing pattern for volume name" msgstr "Archiv mit dem Teilnamen TEXT anlegen; beim Listen/Extrahieren, TEXT als Muster für den Teilnamen benutzen" #: src/tar.c:802 msgid "Compression options:" msgstr "Kompressionsoptionen:" #: src/tar.c:804 msgid "use archive suffix to determine the compression program" msgstr "Archiverweiterung nehmen, um Kompressionsprogramm zu bestimmen" #: src/tar.c:807 msgid "do not use archive suffix to determine the compression program" msgstr "Archiverweiterung nicht nehmen, um Kompressionsprogramm zu bestimmen" #: src/tar.c:809 msgid "PROG" msgstr "PROG" #: src/tar.c:810 msgid "filter through PROG (must accept -d)" msgstr "durch PROG filten (muss -d akzeptieren)" #: src/tar.c:825 msgid "Local file selection:" msgstr "Auswahl der lokalen Dateien:" #: src/tar.c:827 msgid "stay in local file system when creating archive" msgstr "beim Anlegen eines Archivs im lokalen Dateisystem bleiben" #: src/tar.c:829 msgid "don't strip leading '/'s from file names" msgstr "führende „/“-Zeichen in den Dateinamen erhalten" #: src/tar.c:831 msgid "follow symlinks; archive and dump the files they point to" msgstr "symbolischen Verknüpfungen folgen; die Dateien archivieren und abspeichern, auf die sie zeigen" #: src/tar.c:834 msgid "follow hard links; archive and dump the files they refer to" msgstr "harten Verknüpfungen folgen; die Dateien archivieren und abspeichern, auf die sie sich beziehen" #: src/tar.c:836 msgid "MEMBER-NAME" msgstr "ELEMENT-NAME" #: src/tar.c:837 msgid "begin at member MEMBER-NAME when reading the archive" msgstr "beim Lesen der Archivs mit ELEMENT-NAME beginnen" #: src/tar.c:840 msgid "only store files newer than DATE-OR-FILE" msgstr "nur Dateien ablegen, die neuer als DATUM-ODER-DATEI sind" #: src/tar.c:842 msgid "DATE" msgstr "DATUM" #: src/tar.c:843 msgid "compare date and time when data changed only" msgstr "Datum und Zeit nur überprüfen, wenn Daten geändert wurden" #: src/tar.c:844 msgid "CONTROL" msgstr "KONTROLLE" #: src/tar.c:845 msgid "backup before removal, choose version CONTROL" msgstr "Sicherung vor dem Entfernen, wähle Versions-KONTROLLE" #: src/tar.c:846 src/tar.c:896 src/tar.c:898 tests/genfile.c:176 msgid "STRING" msgstr "ZEICHENKETTE" #: src/tar.c:847 msgid "backup before removal, override usual suffix ('~' unless overridden by environment variable SIMPLE_BACKUP_SUFFIX)" msgstr "Sicherung vor dem Entfernen, übliches Suffix ersetzen („~“, wenn nicht durch Umgebungsvariable SIMPLE_BACKUP_SUFFIX anders gesetzt)" #: src/tar.c:851 msgid "File name transformations:" msgstr "Dateinamentransformationen:" #: src/tar.c:853 msgid "strip NUMBER leading components from file names on extraction" msgstr "ZAHL führende Komponenten beim Extrahieren von Dateinamen entfernen" #: src/tar.c:855 msgid "EXPRESSION" msgstr "AUSDRUCK" #: src/tar.c:856 msgid "use sed replace EXPRESSION to transform file names" msgstr "den sed-AUSDRUCK zur Dateinamentransformation benutzen" #: src/tar.c:861 msgid "Informative output:" msgstr "Informationen:" #: src/tar.c:864 msgid "display progress messages every NUMBERth record (default 10)" msgstr "Fortschrittsnachrichten bei jedem ZAHLten Record (Voreinstellung 10) anzeigen" #: src/tar.c:866 msgid "ACTION" msgstr "AKTION" #: src/tar.c:867 msgid "execute ACTION on each checkpoint" msgstr "AKTION bei jedem Kontrollpunkt ausführen" #: src/tar.c:870 msgid "print a message if not all links are dumped" msgstr "eine Nachricht ausgeben, wenn nicht alle Verknüpfungen abgespeichert werden" #: src/tar.c:871 msgid "SIGNAL" msgstr "SIGNAL" #: src/tar.c:872 msgid "print total bytes after processing the archive; with an argument - print total bytes when this SIGNAL is delivered; Allowed signals are: SIGHUP, SIGQUIT, SIGINT, SIGUSR1 and SIGUSR2; the names without SIG prefix are also accepted" msgstr "Gesamtzahl der Bytes nach dem Bearbeiten des Archivs anzeigen; mit einem Argument – Gesamtzahl der Bytes anzeigen, wenn dieses SIGNAL ausgeliefert wird; erlaubte Signale sind: SIGHUP, SIGQUIT, SIGINT, SIGUSR1 und SIGUSR2; die Namen ohne das Präfix SIG sind auch erlaubt" #: src/tar.c:877 msgid "print file modification times in UTC" msgstr "Dateiänderungszeiten in UTC anzeigen" #: src/tar.c:879 msgid "print file time to its full resolution" msgstr "Dateizeit in voller Auflösung anzeigen" #: src/tar.c:881 msgid "send verbose output to FILE" msgstr "ausführliche Ausgabe in DATEI schreiben" #: src/tar.c:883 msgid "show block number within archive with each message" msgstr "bei jeder Nachricht die Blocknummer innerhalb des Archivs mit anzeigen" #: src/tar.c:885 msgid "show tar defaults" msgstr "Voreinstellungen von tar anzeigen" #: src/tar.c:887 msgid "show valid ranges for snapshot-file fields" msgstr "gültige Bereiche für die Felder von Snapshot-Dateien anzeigen" #: src/tar.c:889 msgid "when listing or extracting, list each directory that does not match search criteria" msgstr "beim Listen oder Extrahieren jedes Verzeichnis auflisten, dass nicht den Suchkriterien entspricht" #: src/tar.c:891 msgid "show file or archive names after transformation" msgstr "Datei- oder Archivnamen nach der Transformation anzeigen" #: src/tar.c:894 msgid "STYLE" msgstr "STIL" #: src/tar.c:895 msgid "set name quoting style; see below for valid STYLE values" msgstr "Zitatstil setzen; siehe unten für gültige STIL-Werte" #: src/tar.c:897 msgid "additionally quote characters from STRING" msgstr "zusätzliche Zeichen aus ZEICHENKETTE zitieren" #: src/tar.c:899 msgid "disable quoting for characters from STRING" msgstr "Zeichen aus ZEICHENKETTE nicht zitieren" #: src/tar.c:901 msgid "ask for confirmation for every action" msgstr "für jede Aktion um Bestätigung bitten" #: src/tar.c:904 msgid "verbosely list files processed" msgstr "bearbeitete Dateien ausführlich listen" #: src/tar.c:905 msgid "KEYWORD" msgstr "SCHLÜSSELWORT" #: src/tar.c:906 msgid "warning control" msgstr "Warnungssteuerung" #: src/tar.c:909 msgid "Compatibility options:" msgstr "Kompatibilitätsoptionen:" #: src/tar.c:912 msgid "when creating, same as --old-archive; when extracting, same as --no-same-owner" msgstr "beim Anlegen wie --old-archive; beim Extrahieren wie --no-same-owner" #: src/tar.c:915 msgid "Other options:" msgstr "Weitere Optionen:" #: src/tar.c:918 msgid "disable use of some potentially harmful options" msgstr "möglicherweise schädliche Optionen deaktivieren" #. TRANSLATORS: Both %s in this statement are replaced with #. option names. #: src/tar.c:977 #, c-format msgid "'%s' cannot be used with '%s'" msgstr "„%s“ kann nicht mit %s benutzt werden" #: src/tar.c:1050 msgid "You may not specify more than one '-Acdtrux', '--delete' or '--test-label' option" msgstr "Von den Optionen „-Acdtrux“, „--delete“ oder „--test-label“ ist jeweils nur eine erlaubt" #: src/tar.c:1063 msgid "Conflicting compression options" msgstr "Kompressionsoptionen schließen sich gegenseitig aus" #: src/tar.c:1117 #, c-format msgid "Unknown signal name: %s" msgstr "Unbekannter Signalname: %s" #: src/tar.c:1147 msgid "Date sample file not found" msgstr "Datumsdatei nicht gefunden" #: src/tar.c:1155 #, c-format msgid "Substituting %s for unknown date format %s" msgstr "Ersetze %s für unbekanntes Datumsformat %s" #: src/tar.c:1184 #, c-format msgid "Option %s: Treating date '%s' as %s" msgstr "Option %s: Behandle Datum „%s“ als %s" #: src/tar.c:1224 src/tar.c:1228 src/tar.c:1232 src/tar.c:1236 src/tar.c:1240 #: src/tar.c:1244 src/tar.c:1248 src/tar.c:1252 #, c-format msgid "filter the archive through %s" msgstr "Archiv durch %s filtern" #: src/tar.c:1260 msgid "Valid arguments for the --quoting-style option are:" msgstr "Gültige Argumente für die Option --quoting-style sind:" #: src/tar.c:1264 msgid "" "\n" "*This* tar defaults to:\n" msgstr "" "\n" "*Dieses* „tar“ hat als Voreinstellung:\n" #: src/tar.c:1350 msgid "Invalid owner or group ID" msgstr "Ungültige Benutzer- oder Gruppen-ID" #: src/tar.c:1464 msgid "Invalid blocking factor" msgstr "Ungültige Blockgröße" #: src/tar.c:1524 #, c-format msgid "Malformed density argument: %s" msgstr "Fehlgeformtes Dichteargument: %s" #: src/tar.c:1549 #, c-format msgid "Unknown density: '%c'" msgstr "Unbekannte Dichte: „%c“" #: src/tar.c:1566 #, c-format msgid "Options '-[0-7][lmh]' not supported by *this* tar" msgstr "Die Optionen „-[0-7][lmh]“ unterstützt *dieses* „tar“ nicht." #: src/tar.c:1660 msgid "Invalid tape length" msgstr "Ungültige Bandlänge" #: src/tar.c:1672 msgid "Invalid incremental level value" msgstr "Unzulässiger Wert für inkrementelles Niveau" #: src/tar.c:1718 msgid "More than one threshold date" msgstr "Mehr als eine Datumsgrenze angegeben" #: src/tar.c:1794 msgid "Invalid sparse version value" msgstr "Ungültiger Wert für Sparse-Version (für löchrige Dateien)" #: src/tar.c:1868 msgid "--atime-preserve='system' is not supported on this platform" msgstr "--atime-preserve='system' wird auf dieser Plattform nicht unterstützt" #: src/tar.c:1892 #, fuzzy #| msgid "Read checkpoint %u" msgid "invalid --checkpoint value" msgstr "Lese-Kontrollpunkt %u" #: src/tar.c:1970 msgid "Invalid mode given on option" msgstr "Ungültige Zugriffsrechte angegeben." #: src/tar.c:2001 msgid "Invalid number" msgstr "Ungültige Zahl" #: src/tar.c:2065 msgid "Invalid record size" msgstr "Ungültiger Wert für Recordgröße" #: src/tar.c:2067 #, c-format msgid "Record size must be a multiple of %d." msgstr "Die Recordgröße muss ein Vielfaches von %d sein." #: src/tar.c:2112 msgid "Invalid number of elements" msgstr "Ungültige Elementanzahl" #: src/tar.c:2136 msgid "Only one --to-command option allowed" msgstr "Nur eine Option --to-command erlaubt" #: src/tar.c:2201 #, fuzzy, c-format #| msgid "%s:%lu: location of the error" msgid "%s:%jd: location of the error" msgstr "%s:%lu: Stelle des Fehlers" #: src/tar.c:2204 #, c-format msgid "error parsing %s" msgstr "Fehler beim Parser von %s" #: src/tar.c:2221 msgid "[FILE]..." msgstr "[DATEI]..." #: src/tar.c:2335 #, c-format msgid "cannot split TAR_OPTIONS: %s" msgstr "kann TAR_OPTIONS nicht zerteilen: %s" #: src/tar.c:2350 #, c-format msgid "non-option arguments in %s" msgstr "Argumente, die keine Optionen sind, in %s" #: src/tar.c:2438 #, c-format msgid "Old option '%c' requires an argument." msgstr "Die alte Option „%c“ benötigt ein Argument." #: src/tar.c:2509 msgid "--occurrence is meaningless without a file list" msgstr "--occurrence ist ohne Dateiliste bedeutungslos" #: src/tar.c:2536 msgid "Multiple archive files require '-M' option" msgstr "Mehrteilige Archive verlangen die Option „-M“" #: src/tar.c:2552 msgid "--level is meaningless without --listed-incremental" msgstr "--level ist ohne --listed-incremental bedeutungslos" #: src/tar.c:2568 #, fuzzy, c-format #| msgid "%s: Volume label is too long (limit is %lu byte)" #| msgid_plural "%s: Volume label is too long (limit is %lu bytes)" msgid "%s: Volume label length exceeds %d bytes" msgstr "%s: Band-Nummer ist zu lang (Maximum ist ein Byte)." #: src/tar.c:2579 msgid "Cannot verify multi-volume archives" msgstr "Kann mehrteilige Archive nicht prüfen" #: src/tar.c:2581 msgid "Cannot verify compressed archives" msgstr "Kann komprimierte Archive nicht prüfen" #: src/tar.c:2595 msgid "Cannot use multi-volume compressed archives" msgstr "Kann keine mehrteiligen komprimierten Archive verwenden" #: src/tar.c:2599 msgid "Cannot concatenate compressed archives" msgstr "Kann komprimierte Archive nicht aneinanderhängen" #: src/tar.c:2605 msgid "--mtime conflicts with --set-mtime-command" msgstr "" #: src/tar.c:2611 msgid "--clamp-mtime needs a date specified using --mtime" msgstr "--clamp-mtime benötigt ein mit --mtime gesetztes Datum" #: src/tar.c:2621 msgid "--pax-option can be used only on POSIX archives" msgstr "--pax-option kann nur mit POSIX-Archiven benutzt werden" #: src/tar.c:2628 msgid "--acls can be used only on POSIX archives" msgstr "--acls kann nur mit POSIX-Archiven benutzt werden" #: src/tar.c:2633 msgid "--selinux can be used only on POSIX archives" msgstr "--selinux kann nur mit POSIX-Archiven benutzt werden" #: src/tar.c:2638 msgid "--xattrs can be used only on POSIX archives" msgstr "--xattrs kann nur mit POSIX-Archiven benutzt werden" #: src/tar.c:2686 msgid "Cannot deduce top-level directory name; please set it explicitly with --one-top-level=DIR" msgstr "Kann Namen des obersten Verzeichnisses nicht ableiten; bitte explizit mit --one-top-level=VERZ setzen" #: src/tar.c:2719 msgid "Volume length cannot be less than record size" msgstr "Teillänge kann nicht unter der Recordgröße liegen" #: src/tar.c:2742 msgid "Cowardly refusing to create an empty archive" msgstr "Anlegen eines leeren Archivs wird feige verweigert" #: src/tar.c:2768 msgid "Options '-Aru' are incompatible with '-f -'" msgstr "Optionen „-Aru“ sind nicht kompatibel mit „-f -“" #: src/tar.c:2852 msgid "failed to assert availability of the standard file descriptors" msgstr "konnte die Verfügbarkeit der Standard-Dateideskriptoren nicht feststellen" #: src/tar.c:2875 msgid "You must specify one of the '-Acdtrux', '--delete' or '--test-label' options" msgstr "Eine der Optionen „-Acdtrux“, „--delete“ oder „--test-label“ ist notwendig" #: src/tar.c:2927 #, c-format msgid "Exiting with failure status due to previous errors" msgstr "Beende mit Fehlerstatus aufgrund vorheriger Fehler" #: src/xheader.c:164 #, c-format msgid "Keyword %s is unknown or not yet implemented" msgstr "Schlüsselwort %s ist unbekannt oder noch nicht implementiert" #: src/xheader.c:173 msgid "Time stamp is out of allowed range" msgstr "Zeitstempel außerhalb des zulässigen Bereichs" #: src/xheader.c:188 #, c-format msgid "Malformed pax option: %s" msgstr "Fehlgeformte pax-Option: %s" #: src/xheader.c:207 #, c-format msgid "Pattern %s cannot be used" msgstr "Muster %s kann nicht benutzt werden" #: src/xheader.c:221 #, c-format msgid "Keyword %s cannot be overridden" msgstr "Schlüsselwort %s kann nicht überschrieben werden" #: src/xheader.c:484 msgid "can't update global extended header record" msgstr "kann den globalen erweiterten Kopfrecord nicht aktualisieren" #: src/xheader.c:620 msgid "Malformed extended header: missing length" msgstr "Fehlgeformter erweiterter Kopfteil: fehlende Länge" #: src/xheader.c:629 #, c-format msgid "Extended header length %.*s is out of range" msgstr "Länge %.*s des erweiterten Kopfteils ist außerhalb des Bereichs" #: src/xheader.c:640 msgid "Malformed extended header: missing blank after length" msgstr "Fehlgeformter erweiterter Kopfteil: fehlender Leerraum nach der Länge" #: src/xheader.c:648 msgid "Malformed extended header: missing equal sign" msgstr "Fehlgeformter erweiterter Kopfteil: fehlendes Gleichheitszeichen" #: src/xheader.c:654 msgid "Malformed extended header: missing newline" msgstr "Fehlgeformter erweiterter Kopfteil: fehlender Zeilenvorschub" #: src/xheader.c:692 #, fuzzy, c-format #| msgid "Ignoring unknown extended header keyword '%s'" msgid "Ignoring unknown extended header keyword %s" msgstr "Ignoriere unbekanntes Schlüsselwort „%s“ für erweiterten Kopfteil" #. TRANSLATORS: The first %s is the pax extended header keyword #. (atime, gid, etc.). #: src/xheader.c:975 #, fuzzy, c-format #| msgid "Extended header %s=%s is out of range %s..%s" msgid "Extended header %s=%s is out of range %jd..%ju" msgstr "Erweiterter Kopfteil %s=%s ist außerhalb des Bereichs %s..%s" #: src/xheader.c:1026 src/xheader.c:1032 src/xheader.c:1066 src/xheader.c:1419 #, c-format msgid "Malformed extended header: invalid %s=%s" msgstr "Fehlgeformter erweiterter Kopfteil: ungültiges %s=%s" #: src/xheader.c:1372 src/xheader.c:1397 src/xheader.c:1445 #, c-format msgid "Malformed extended header: excess %s=%s" msgstr "Fehlgeformter erweiterter Kopfteil: überzähliges %s=%s" #: src/xheader.c:1458 #, c-format msgid "Malformed extended header: invalid %s: unexpected delimiter %c" msgstr "Fehlgeformter erweiterter Kopfteil: ungültiges %s: unerwarteter Trenner %c" # Ist „odd“ hier ungerade oder merkwürdig? #: src/xheader.c:1469 #, c-format msgid "Malformed extended header: invalid %s: odd number of values" msgstr "Fehlgeformter erweiterter Kopfteil: ungültiges %s: ungewöhnliche Anzahl von Werten" #: src/checkpoint.c:119 #, c-format msgid "%s: not a valid timeout" msgstr "%s: kein gültiger Zeitüberschreitungswert" #: src/checkpoint.c:130 #, c-format msgid "%s: unknown checkpoint action" msgstr "%s: unbekannte Kontrollpunkt-Aktion" #: src/checkpoint.c:211 msgid "write" msgstr "lesen" #: src/checkpoint.c:211 msgid "read" msgstr "schreiben" #. TRANSLATORS: This is a "checkpoint of write operation", #. *not* "Writing a checkpoint". #: src/checkpoint.c:223 #, c-format msgid "Write checkpoint %u" msgstr "Schreib-Kontrollpunkt %u" #. TRANSLATORS: This is a "checkpoint of read operation", #. *not* "Reading a checkpoint". #: src/checkpoint.c:227 #, c-format msgid "Read checkpoint %u" msgstr "Lese-Kontrollpunkt %u" #: src/checkpoint.c:286 #, fuzzy, c-format #| msgid "too many arguments" msgid "too many words in '%s'" msgstr "zu viele Argumente" #: tests/genfile.c:109 msgid "" "genfile manipulates data files for GNU paxutils test suite.\n" "OPTIONS are:\n" msgstr "" "genfile manipuliert Datendateien für die Testsuite der GNU paxutils.\n" "OPTIONEN sind:\n" #: tests/genfile.c:125 msgid "File creation options:" msgstr "Optionen beim Anlegen von Dateien:" #: tests/genfile.c:126 tests/genfile.c:137 msgid "SIZE" msgstr "GRÖßE" #: tests/genfile.c:127 msgid "Create file of the given SIZE" msgstr "Datei der gegebenen GRÖßE anlegen" #: tests/genfile.c:129 msgid "Write to file NAME, instead of standard output" msgstr "In Datei NAME anstelle der Standardausgabe schreiben" #: tests/genfile.c:131 msgid "Read file names from FILE" msgstr "Dateinamenlist aus DATEI lesen" #: tests/genfile.c:133 msgid "-T reads null-terminated names" msgstr "-T liest null-terminierte Namen" #: tests/genfile.c:135 msgid "Fill the file with the given PATTERN. PATTERN is 'default' or 'zeros'" msgstr "Die Datei mit dem gegebenen MUSTER füllen. MUSTER ist „default“ oder „zeros“." #: tests/genfile.c:138 msgid "Size of a block for sparse file" msgstr "Größe eines Blocks für löchrige Dateien" # „map“: Karte, Abbildung? #: tests/genfile.c:140 msgid "Generate sparse file. Rest of the command line gives the file map." msgstr "Löchrige („sparse“) Datei erzeugen. Der Rest der Kommandozeile gibt die Dateibildungsvorschrift an." #: tests/genfile.c:142 msgid "OFFSET" msgstr "POSITION" #: tests/genfile.c:143 msgid "Seek to the given offset before writing data" msgstr "Vor dem Schreiben zur gegebenen Position springen" #: tests/genfile.c:146 msgid "Suppress non-fatal diagnostic messages" msgstr "Diagnosemeldungen, die nicht schwerwiegend sind, unterdrücken" #: tests/genfile.c:150 msgid "File statistics options:" msgstr "Dateistatistikoptionen:" #: tests/genfile.c:153 msgid "Print contents of struct stat for each given file. Default FORMAT is: " msgstr "Inhalt des „struct stat“ für jede gegebene Datei ausgeben. Standard-FORMAT ist: " #: tests/genfile.c:157 msgid "stat symbolic links instead of referenced files" msgstr "" #: tests/genfile.c:161 msgid "Set access and modification times of the files to the time supplied by --date option" msgstr "" #: tests/genfile.c:168 msgid "Synchronous execution options:" msgstr "Optionen für synchrone Ausführung:" #: tests/genfile.c:170 msgid "N" msgstr "N" #: tests/genfile.c:171 msgid "Execute ARGS. Trigger checkpoints every Nth record (default 1). Useful with --checkpoint and one of --cut, --append, --touch, --unlink" msgstr "ARGUMENTE ausführen. Kontrollpunkt bei jedem N-ten (Voreinstellung 1) Record auslösen. Nützlich mit --checkpoint und einem aus --cut, --append, --touch, --unlink" #: tests/genfile.c:174 msgid "Perform given action (see below) upon reaching checkpoint NUMBER" msgstr "Angegebene Aktion (siehe unten) beim Erreichen des Kontrollpunkts ZAHL ausführen" #: tests/genfile.c:177 msgid "Set date for next --touch option" msgstr "Datum für nächste „--touch“-Operation setzen" #: tests/genfile.c:180 msgid "Display executed checkpoints and exit status of COMMAND" msgstr "Ausgeführte Kontrollpunkte und Beendigungsstatus von BEFEHL anzeigen" #: tests/genfile.c:185 msgid "Synchronous execution actions. These are executed when checkpoint number given by --checkpoint option is reached." msgstr "Aktionen für synchrone Ausführung. Diese werden beim Erreichen des Kontrollpunkts, der mit der Option --checkpoint gesetzt wurde, ausgeführt." #: tests/genfile.c:188 msgid "Truncate FILE to the size specified by previous --length option (or 0, if it is not given)" msgstr "DATEI kürzen auf die Länge, die mit einer vorhergehenden Option --length (oder 0 bei Abwesenheit) gesetzt wurde" #: tests/genfile.c:192 msgid "Append SIZE bytes to FILE. SIZE is given by previous --length option." msgstr "GRÖßE Bytes an DATEI anfügen. GRÖßE wird mit einer vorhergehenden Option --length gesetzt." #: tests/genfile.c:195 msgid "Update the access and modification times of FILE" msgstr "Zugriffs- und Änderungszeiten der DATEI neu setzen" #: tests/genfile.c:198 msgid "Execute COMMAND" msgstr "BEFEHL ausführen" #: tests/genfile.c:201 msgid "Delete FILE" msgstr "DATEI löschen" #: tests/genfile.c:237 tests/genfile.c:245 #, c-format msgid "Invalid size: %s" msgstr "Ungültige Größe: %s" #: tests/genfile.c:239 #, c-format msgid "Negative size: %s" msgstr "Negative Größe: %s" #: tests/genfile.c:242 tests/genfile.c:247 tests/genfile.c:329 #: tests/genfile.c:539 #, c-format msgid "Number out of allowed range: %s" msgstr "Zahl außerhalb des zulässigen Bereichs: %s" #: tests/genfile.c:259 tests/genfile.c:670 #, c-format msgid "stat(%s) failed" msgstr "stat(%s) fehlgeschlagen" #: tests/genfile.c:264 #, c-format msgid "requested file length %jd, actual %jd" msgstr "Dateilänge %jd verlangt, tatsächlich %jd" #: tests/genfile.c:269 #, c-format msgid "created file is not sparse" msgstr "erzeugte Datei ist nicht löchrig" #: tests/genfile.c:381 #, c-format msgid "Error parsing number near `%s'" msgstr "Fehler beim Parser der Zahl in der Nähe von „%s“" #: tests/genfile.c:387 #, c-format msgid "Unknown date format" msgstr "Unbekanntes Datumsformat" #: tests/genfile.c:411 msgid "[ARGS...]" msgstr "[ARGUMENTE...]" #: tests/genfile.c:446 tests/genfile.c:489 tests/genfile.c:597 #: tests/genfile.c:789 tests/genfile.c:803 #, c-format msgid "cannot open `%s'" msgstr "kann „%s“ nicht öffnen" #: tests/genfile.c:452 msgid "cannot seek" msgstr "kann nicht positionieren" #: tests/genfile.c:472 #, c-format msgid "file name contains null character" msgstr "Dateiname enthält Null-Zeichen" #: tests/genfile.c:592 #, c-format msgid "cannot generate sparse files on standard output, use --file option" msgstr "kann auf der Standardausgabe keine löchrige Datei erstellen, benutzen Sie die Option --file" #: tests/genfile.c:697 #, c-format msgid "incorrect mask (near `%s')" msgstr "inkorrekte Maske (nahe „%s“)" #: tests/genfile.c:703 tests/genfile.c:736 #, c-format msgid "Unknown field `%s'" msgstr "Unbekanntes Feld „%s“" #: tests/genfile.c:756 tests/genfile.c:778 #, c-format msgid "cannot set time on `%s'" msgstr "kann an „%s“ keine Zeit setzen" #: tests/genfile.c:808 #, c-format msgid "cannot truncate `%s'" msgstr "kann „%s“ nicht abschneiden" #: tests/genfile.c:817 #, c-format msgid "command failed: %s" msgstr "Befehl fehlgeschlagen: %s" #: tests/genfile.c:824 #, c-format msgid "cannot stat `%s'" msgstr "kann nicht auf „%s“ zugreifen" #: tests/genfile.c:828 #, c-format msgid "cannot remove directory `%s'" msgstr "kann Verzeichnis „%s“ nicht entfernen" #: tests/genfile.c:831 #, c-format msgid "cannot unlink `%s'" msgstr "kann „%s“ nicht entfernen (unlink)" #: tests/genfile.c:961 #, c-format msgid "Command exited successfully\n" msgstr "Befehl erfolgreich ausgeführt\n" #: tests/genfile.c:963 #, c-format msgid "Command failed with status %d\n" msgstr "Befehl schlug mit Beendigungsstatus %d fehl.\n" #: tests/genfile.c:967 #, c-format msgid "Command terminated on signal %d\n" msgstr "Befehl beendete sich bei Signal %d\n" #: tests/genfile.c:969 #, c-format msgid "Command stopped on signal %d\n" msgstr "Befehl hielt bei Signal %d an\n" #: tests/genfile.c:972 #, c-format msgid "Command dumped core\n" msgstr "Befehl erzeugte einen Core-Dump\n" #: tests/genfile.c:975 #, c-format msgid "Command terminated\n" msgstr "Befehl beendet\n" #: tests/genfile.c:1007 #, c-format msgid "--stat requires file names" msgstr "--stat erfordert Dateinamen" #: tests/genfile.c:1015 #, fuzzy, c-format #| msgid "--stat requires file names" msgid "--set-times requires file names" msgstr "--stat erfordert Dateinamen" #, c-format #~ msgid "%s: Warning: Read error at byte %jd, while reading %zu byte" #~ msgid_plural "%s: Warning: Read error at byte %jd, while reading %zu bytes" #~ msgstr[0] "%s: Warnung: Lesefehler bei Byte %jd beim Lesen von einem Byte" #~ msgstr[1] "%s: Warnung: Lesefehler bei Byte %jd beim Lesen von %zu Bytes" #, c-format #~ msgid "Cannot connect to %s: resolve failed" #~ msgstr "Kann nicht mit %s verbinden: Auflösung fehlgeschlagen" #, c-format #~ msgid "%s: File shrank by %s byte; padding with zeros" #~ msgid_plural "%s: File shrank by %s bytes; padding with zeros" #~ msgstr[0] "Datei %s ist um ein Byte geschrumpft, fülle mit Null auf." #~ msgstr[1] "Datei %s ist um %s Bytes geschrumpft, fülle mit Nullen auf." #~ msgid "--checkpoint value is not an integer" #~ msgstr "Wert für --checkpoint ist keine ganze Zahl" #, c-format #~ msgid "Generated keyword/value pair is too long (keyword=%s, length=%s)" #~ msgstr "Generiertes Schlüsselwort/Wert-Paar ist zu lang (Schlüsselwort=%s, Länge =%s)" #~ msgid "%s: file is the archive; not dumped" #~ msgstr "%s ist das Archiv; nicht gesichert." #~ msgid "%s: File shrank by %s byte" #~ msgid_plural "%s: File shrank by %s bytes" #~ msgstr[0] "%s: Datei ist um ein Byte geschrumpft" #~ msgstr[1] "%s: Datei ist um %s Bytes geschrumpft" #~ msgid "%s home page: \n" #~ msgstr "Homepage von %s: \n" #~ msgid "OPTION" #~ msgstr "OPTION" #~ msgid "%s: option '--%s' doesn't allow an argument\n" #~ msgstr "%s: Option „--%s“ erlaubt kein Argument\n" #~ msgid "%s: unrecognized option '--%s'\n" #~ msgstr "%s: Unbekannte Option „--%s“\n" #~ msgid "%s: option '-W %s' is ambiguous\n" #~ msgstr "%s: Option „-W %s“ ist mehrdeutig\n" #~ msgid "%s: option '-W %s' doesn't allow an argument\n" #~ msgstr "%s: Option „-W %s“ erlaubt kein Argument\n" #~ msgid "%s: option '-W %s' requires an argument\n" #~ msgstr "%s: Option „-W %s“ benötigt ein Argument\n" #~ msgid "Unlink FILE" #~ msgstr "FILE entfernen (unlink)" #~ msgid "same as both -p and -s" #~ msgstr "wie -p und -s zusammen" #~ msgid "--occurrence cannot be used with %s" #~ msgstr "--occurrence kann mit %s nicht benutzt werden" #~ msgid "Cannot combine --listed-incremental with --newer" #~ msgstr "--listed-incremental kann nicht mit --newer benutzt werden" #~ msgid "--verify cannot be used with %s" #~ msgstr "--verify kann nicht mit %s benutzt werden" #~ msgid "--preserve-order is not compatible with --listed-incremental" #~ msgstr "--preserve-order ist nicht kompatibel mit --listed-incremental" #~ msgid "Field too long while reading snapshot file" #~ msgstr "Feld zu lang beim Lesen der Schnappschussdatei" #~ msgid "Read error in snapshot file" #~ msgstr "Lesefehler in Schnappschussdatei" #~ msgid "Unexpected field value in snapshot file" #~ msgstr "Unerwarteter Feldwert in Schnappschussdatei" #~ msgid "Cannot get working directory" #~ msgstr "Kann Arbeitsverzeichnis nicht ermitteln." #~ msgid "sort names to extract to match archive" #~ msgstr "zu entpackende Dateinamen wie im Archiv sortieren" #~ msgid "Invalid group" #~ msgstr "Ungültige Gruppe" #~ msgid "Extended header length is out of allowed range" #~ msgstr "Länge des erweiterten Kopfteils ist außerhalb des erlaubten Bereichs" #~ msgid "%s: Directory removed before we read it" #~ msgstr "%s: Verzeichnis gelöscht, bevor es gelesen wurde." #~ msgid "Cannot save working directory" #~ msgstr "Kann aktuelles Verzeichnis nicht sichern." #~ msgid "%s: illegal option -- %c\n" #~ msgstr "%s: Unzulässige Option -- %c\n" #~ msgid "Input string too long" #~ msgstr "Eingabezeichenkette zu lang" #~ msgid "Number syntax error" #~ msgstr "Syntaxfehler in der Zahl" #~ msgid "rmtd: Cannot allocate buffer space\n" #~ msgstr "rmtd: Kann Speicherplatz für Puffer nicht reservieren.\n" #~ msgid "Cannot allocate buffer space" #~ msgstr "Kann keinen Speicher für Puffer reservieren." #~ msgid "Try `%s --help' for more information.\n" #~ msgstr "„%s --help“ zeigt weitere Informationen.\n" #~ msgid "Seek offset error" #~ msgstr "Fehler bei der Positionierungsangabe." #~ msgid "Premature end of file" #~ msgstr "Vorzeitiges Dateiende." #~ msgid "Reading %s\n" #~ msgstr "Lese %s.\n" #~ msgid "Error is not recoverable: exiting now" #~ msgstr "Nicht behebbarer Fehler: Programmabbruch. " #~ msgid "suppress this warning." #~ msgstr "--no-wildcards, um diese Warnung zu unterdrücken." #~ msgid "filter the archive through bzip2" #~ msgstr "Archiv durch bzip2 filtern" #~ msgid "filter the archive through gzip" #~ msgstr "Archiv durch gzip filtern" #~ msgid "filter the archive through compress" #~ msgstr "Archiv durch compress filtern" #~ msgid "filter the archive through lzma" #~ msgstr "Archiv durch lzma filtern" #~ msgid "filter the archive through lzop" #~ msgstr "Archiv durch lzop filtern" #~ msgid "Warning: the -I option is not supported; perhaps you meant -j or -T?" #~ msgstr "Warnung: Die Option -I ist nicht unterstützt, meinen Sie -j oder -T?" # Was ist hier genau gemeint? ke #~ msgid "Error exit delayed from previous errors" #~ msgstr "Fehler beim Beenden, verursacht durch vorhergehende Fehler." #~ msgid "[.]NUMBER" #~ msgstr "[.]ZAHL" #~ msgid "block size" #~ msgstr "Blockgröße" #~ msgid "%s: Read error at byte %s, reading %lu byte" #~ msgid_plural "%s: Read error at byte %s, reading %lu bytes" #~ msgstr[0] "%s: Lesefehler bei Byte %s, lese ein Byte" #~ msgstr[1] "%s: Lesefehler bei Byte %s, lese %lu Bytes" #~ msgid "--Mangled file names--\n" #~ msgstr "––Verstümmelte Dateinamen––\n" #~ msgid "Renamed %s to %s" #~ msgstr "%s in %s umbenannt" #~ msgid "%s: Cannot symlink to %s" #~ msgstr "%s: Kann nicht zu „%s“ linken." #~ msgid "Symlinked %s to %s" #~ msgstr "Symbolische Verknüpfung von %s auf %s." #~ msgid "Unknown demangling command %s" #~ msgstr "Unbekanntes Befehl „%s“ beim Zusammensetzen von Namen."