# Fetchmail Spanish Translation # Copyright (C) 2022 Eric S. Raymond (msgids) # This file is distributed under the same license as the fetchmail package. # Javier Kohen , 1999. # Francisco Molinero , 2009. # Cristian Othón Martínez Vera , 2022. # msgid "" msgstr "" "Project-Id-Version: fetchmail 6.4.31\n" "Report-Msgid-Bugs-To: fetchmail-devel@lists.sourceforge.net\n" "POT-Creation-Date: 2022-07-16 11:58+0200\n" "PO-Revision-Date: 2022-07-18 09:10-0500\n" "Last-Translator: Cristian Othón Martínez Vera \n" "Language-Team: Spanish \n" "Language: es\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Bugs: Report translation errors to the Language-Team address.\n" "Plural-Forms: nplurals=2; plural=n != 1;\n" #: checkalias.c:174 #, c-format msgid "Checking if %s is really the same node as %s\n" msgstr "Verificando si %s es realmente el mismo nodo que %s\n" #: checkalias.c:178 msgid "Yes, their IP addresses match\n" msgstr "Sí, sus direcciones IP coinciden\n" #: checkalias.c:182 msgid "No, their IP addresses don't match\n" msgstr "No, sus direcciones IP no coinciden\n" #: checkalias.c:207 #, c-format msgid "nameserver failure while looking for '%s' during poll of %s: %s\n" msgstr "fallo en la resolución de nombres buscando «%s» durante la consulta de %s:%s\n" #: checkalias.c:230 #, c-format msgid "nameserver failure while looking for `%s' during poll of %s.\n" msgstr "fallo en la resolución de nombres buscando «%s» durante la consulta de %s.\n" #: cram.c:95 ntlmsubr.c:65 msgid "could not decode BASE64 challenge\n" msgstr "no fue posible decodificar el desafío BASE64\n" #: cram.c:103 #, c-format msgid "decoded as %s\n" msgstr "decodificado como %s\n" #: driver.c:199 #, c-format msgid "kerberos error %s\n" msgstr "error de kerberos %s\n" #: driver.c:259 driver.c:265 #, c-format msgid "krb5_sendauth: %s [server says '%s']\n" msgstr "krb5_sendauth: %s [el servidor dice «%s»]\n" #: driver.c:345 msgid "Fetchmail oversized-messages warning" msgstr "Aviso de fetchmail para mensajes excedidos en tamaño" #: driver.c:349 #, c-format msgid "The following oversized messages were deleted on server %s account %s:" msgstr "Los siguientes mensajes excedidos de tamaño se borraron del servidor %s cuenta %s:" #: driver.c:353 #, c-format msgid "The following oversized messages remain on server %s account %s:" msgstr "Los siguientes mensajes excedidos de tamaño permanecen en el servidor %s cuenta %s:" #: driver.c:372 #, c-format msgid " %d message %d octets long deleted by fetchmail." msgid_plural " %d messages %d octets long deleted by fetchmail." msgstr[0] " %d mensaje de %d octetos de largo borrado por fetchmail." msgstr[1] " %d mensajes de %d octetos de largo borrados por fetchmail." #: driver.c:377 #, c-format msgid " %d message %d octets long skipped by fetchmail." msgid_plural " %d messages %d octets long skipped by fetchmail." msgstr[0] " %d mensaje de %d octetos de largo omitido por fetchmail." msgstr[1] " %d mensajes de %d octetos de largo omitidos por fetchmail." #: driver.c:522 #, c-format msgid "skipping message %s@%s:%d" msgstr "omitiendo mensaje %s@%s:%d" #: driver.c:577 #, c-format msgid "skipping message %s@%s:%d (%d octets)" msgstr "omitiendo mensaje %s@%s:%d (%d octetos)" #: driver.c:593 msgid " (length -1)" msgstr " (longitud -1)" #: driver.c:596 msgid " (oversized)" msgstr " (demasiado grande)" #: driver.c:614 #, c-format msgid "couldn't fetch headers, message %s@%s:%d (%d octets)\n" msgstr "no fue posible recibir los encabezados, mensaje %s@%s:%d (%d octetos)\n" #: driver.c:632 #, c-format msgid "reading message %s@%s:%d of %d" msgstr "leyendo el mensaje %s@%s:%d de %d" #: driver.c:637 #, c-format msgid " (%d octets)" msgstr " (%d octetos)" #: driver.c:638 #, c-format msgid " (%d header octets)" msgstr " (%d octetos en la cabecera) " #: driver.c:708 #, c-format msgid " (%d body octets)" msgstr " (%d octetos en el cuerpo) " #: driver.c:770 #, c-format msgid "message %s@%s:%d was not the expected length (%d actual != %d expected)\n" msgstr "el mensaje %s@%s:%d no tenía la longitud esperada (%d actual != %d esperada)\n" #: driver.c:802 msgid " retained\n" msgstr " retenido\n" #: driver.c:812 msgid " flushed\n" msgstr " eliminado\n" #: driver.c:824 msgid " not flushed\n" msgstr " no eliminado\n" #: driver.c:842 #, c-format msgid "fetchlimit %d reached; %d message left on server %s account %s\n" msgid_plural "fetchlimit %d reached; %d messages left on server %s account %s\n" msgstr[0] "límite de %d mensajes alcanzado; se dejó %d mensaje en la cuenta %s del servidor %s\n" msgstr[1] "límite de %d mensajes alcanzado; se dejaron %d mensajes en la cuenta %s del servidor %s\n" #: driver.c:900 #, c-format msgid "timeout after %d seconds waiting to connect to server %s.\n" msgstr "tiempo agotado después de %d segundos de espera para conectarse con el servidor %s.\n" #: driver.c:904 #, c-format msgid "timeout after %d seconds waiting for server %s.\n" msgstr "tiempo agotado después de %d segundos de espera por el servidor %s.\n" #: driver.c:908 #, c-format msgid "timeout after %d seconds waiting for %s.\n" msgstr "tiempo agotado después de %d segundos de espera por %s.\n" #: driver.c:913 #, c-format msgid "timeout after %d seconds waiting for listener to respond.\n" msgstr "tiempo agotado después de %d segundos de esperar respuesta del cliente.\n" #: driver.c:916 #, c-format msgid "timeout after %d seconds.\n" msgstr "tiempo agotado después de %d segundos.\n" #: driver.c:928 msgid "fetchmail sees repeated timeouts" msgstr "fetchmail ve repetidos excesos del tiempo de espera" #: driver.c:931 #, c-format msgid "Fetchmail saw more than %d timeouts while attempting to get mail from %s@%s.\n" msgstr "Fetchmail vio más de %d excesos en el tiempo de espera mientras intentaba obtener correo de %s@%s.\n" #: driver.c:935 msgid "" "This could mean that your mailserver is stuck, or that your SMTP\n" "server is wedged, or that your mailbox file on the server has been\n" "corrupted by a server error. You can run `fetchmail -v -v' to\n" "diagnose the problem.\n" "\n" "Fetchmail won't poll this mailbox again until you restart it.\n" msgstr "" "Esto puede significar que su servidor de correo se bloqueó, o que su\n" "servidor SMTP se colgó, o que su casilla de correo en el servidor se ha\n" "corrompido por un error de servidor. Puede ejecutar «fetchmail -v -v»\n" "para diagnosticar el problema.\n" "Fetchmail no consultará esta casilla hasta que lo reinicie.\n" #: driver.c:961 #, c-format msgid "pre-connection command terminated with signal %d\n" msgstr "la orden de preconexión falló con la señal %d\n" #: driver.c:964 #, c-format msgid "pre-connection command failed with status %d\n" msgstr "la orden de preconexión falló con la señal %d\n" #: driver.c:994 #, c-format msgid "couldn't find HESIOD pobox for %s\n" msgstr "no fue posible encontrar la casilla HESIOD para %s\n" #: driver.c:1015 msgid "Lead server has no name.\n" msgstr "El servidor líder no tiene nombre.\n" #: driver.c:1042 #, c-format msgid "couldn't find canonical DNS name of %s (%s): %s\n" msgstr "no se encontró el nombre DNS canónico de %s (%s): %s\n" #: driver.c:1089 #, c-format msgid "%s connection to %s failed" msgstr "Falló la conexión de %s a %s" #: driver.c:1118 msgid "SSL connection failed.\n" msgstr "Fallo en la conexión SSL.\n" #: driver.c:1172 #, c-format msgid "Lock-busy error on %s@%s\n" msgstr "Error «lock-busy» en %s@%s\n" #: driver.c:1176 #, c-format msgid "Server busy error on %s@%s\n" msgstr "Error: servidor ocupado en %s@%s\n" #: driver.c:1181 #, c-format msgid "Authorization failure on %s@%s%s\n" msgstr "Fallo de autorización en %s@%s%s\n" #: driver.c:1184 msgid " (previously authorized)" msgstr " (previamente autorizado)" #: driver.c:1187 msgid "For help, see http://www.fetchmail.info/fetchmail-FAQ.html#R15\n" msgstr "Para obtener ayuda, consulte http://www.fetchmail.info/fetchmail-FAQ.html#R15\n" #: driver.c:1208 #, c-format msgid "fetchmail authentication failed on %s@%s" msgstr "la autenticación de fetchmail falló en %s@%s" #: driver.c:1212 #, c-format msgid "Fetchmail could not get mail from %s@%s.\n" msgstr "Fetchmail no pudo obtener correo de %s@%s.\n" #: driver.c:1216 msgid "" "The attempt to get authorization failed.\n" "Since we have already succeeded in getting authorization for this\n" "connection, this is probably another failure mode (such as busy server)\n" "that fetchmail cannot distinguish because the server didn't send a useful\n" "error message." msgstr "" "El intento de obtener autorización falló.\n" "Debido a que ya hemos tenido éxito al obtener autorización para esta\n" "conexión, esto probablemente sea otro modo de fallo (como un servidor\n" "ocupado) que fetchmail no puede distinguir porque el servido no envió\n" "un mensaje de error útil.\n" "\n" "Sin embargo, si cambió los detalles de su cuenta tras haber iniciado\n" "el proceso fetchmail, necesita detener el proceso, cambiar la configuración\n" " de fetchmail y reiniciarlo.\n" "\n" "El proceso fetchmail continuará corriendo e intentando establecer la\n" "conexión en cada ciclo. No se enviarán más notificaciones hasta que el\n" "servicio se restablezca." #: driver.c:1222 msgid "" "\n" "However, if you HAVE changed your account details since starting the\n" "fetchmail daemon, you need to stop the daemon, change your configuration\n" "of fetchmail, and then restart the daemon.\n" "\n" "The fetchmail daemon will continue running and attempt to connect\n" "at each cycle. No future notifications will be sent until service\n" "is restored." msgstr "" "\n" "Sin embargo, si HA cambiado los detalles de su cuenta desde el inicio del\n" "demonio fetchmail, tiene que parar el demonio, cambiar su configuración\n" "de fetchmail, y reiniciar el demonio.\n" "\n" "El demonio fetchmail continuará corriendo e intentando conectar\n" "en cada ciclo. No se enviarán futuras notificaciones hasta que el servicio\n" "se restaure." #: driver.c:1232 msgid "" "The attempt to get authorization failed.\n" "This probably means your password is invalid, but some servers have\n" "other failure modes that fetchmail cannot distinguish from this\n" "because they don't send useful error messages on login failure.\n" "\n" "The fetchmail daemon will continue running and attempt to connect\n" "at each cycle. No future notifications will be sent until service\n" "is restored." msgstr "" "El intento de obtener autorización falló.\n" "Esto probablemente signifique que su contraseña no es válida. Aunque algunos\n" "servidores POP3 tienen otros modos de fallar que fetchmail no puede\n" "distinguir de éste porque no envían mensajes de error útiles cuando se\n" "falla en el acceso.\n" "\n" "El proceso fetchmail continuará corriendo e intentando establecer la\n" "conexión en cada ciclo. No se enviarán más notificaciones hasta que el\n" "servicio se restablezca." #: driver.c:1248 #, c-format msgid "Repoll immediately on %s@%s\n" msgstr "Volver a consultar inmediatamente %s@%s\n" #: driver.c:1254 #, c-format msgid "Socket or TLS error on %s@%s\n" msgstr "Error de zócalo o TLS en %s@%s\n" #: driver.c:1260 #, c-format msgid "Unknown login or authentication error on %s@%s\n" msgstr "Error de entrada o de autenticación desconocido en %s@%s\n" #: driver.c:1285 #, c-format msgid "Authorization OK on %s@%s\n" msgstr "Autorización correcta en %s@%s\n" #: driver.c:1291 #, c-format msgid "fetchmail authentication OK on %s@%s" msgstr "autenticación de fetchmail correcta en %s@%s" #: driver.c:1295 #, c-format msgid "Fetchmail was able to log into %s@%s.\n" msgstr "Fetchmail pudo registrarse en %s@%s.\n" #: driver.c:1299 msgid "Service has been restored.\n" msgstr "El servicio se ha reestablecido.\n" #: driver.c:1332 #, c-format msgid "selecting or re-polling folder %s\n" msgstr "seleccionando o volviendo a consultar la carpeta %s\n" #: driver.c:1334 msgid "selecting or re-polling default folder\n" msgstr "seleccionando o volviendo a consultar la carpeta predeterminada\n" #: driver.c:1346 #, c-format msgid "%s at %s (folder %s)" msgstr "%s en %s (carpeta %s)" #: driver.c:1349 rcfile_y.y:390 #, c-format msgid "%s at %s" msgstr "%s en %s" #: driver.c:1354 #, c-format msgid "Polling %s\n" msgstr "Consultando %s\n" #: driver.c:1358 #, c-format msgid "%d message (%d %s) for %s" msgid_plural "%d messages (%d %s) for %s" msgstr[0] "%d mensaje (%d %s) para %s" msgstr[1] "%d mensajes (%d %s) para %s" #: driver.c:1361 msgid "seen" msgid_plural "seen" msgstr[0] "visto" msgstr[1] "vistos" #: driver.c:1364 #, c-format msgid "%d message for %s" msgid_plural "%d messages for %s" msgstr[0] "%d mensaje para %s" msgstr[1] "%d mensajes para %s" #: driver.c:1371 #, c-format msgid " (%d octets).\n" msgstr " (%d octetos).\n" #: driver.c:1377 #, c-format msgid "No mail for %s\n" msgstr "No hay correo para %s\n" #: driver.c:1410 msgid "bogus message count!" msgstr "¡cantidad de mensajes incorrecta!" #: driver.c:1462 #, c-format msgid "Too many mails skipped (%d > %d) due to transient errors for %s\n" msgstr "Demasiados mensajes saltados (%d > %d) debido a errores transitorios para %s\n" #: driver.c:1568 msgid "socket" msgstr "zócalo" #: driver.c:1571 msgid "missing or bad RFC822 header" msgstr "el encabezado RFC822 falta o es incorrecto" #: driver.c:1574 msgid "MDA" msgstr "MDA" #: driver.c:1577 msgid "client/server synchronization" msgstr "sincronización cliente/servidor" #: driver.c:1580 msgid "client/server protocol" msgstr "protocolo cliente/servidor" #: driver.c:1583 msgid "lock busy on server" msgstr "bloqueo ocupado en el servidor" #: driver.c:1586 msgid "SMTP transaction" msgstr "Transacción SMTP" #: driver.c:1589 msgid "DNS lookup" msgstr "búsqueda en DNS" #: driver.c:1592 msgid "undefined" msgstr "indefinido" #: driver.c:1598 #, c-format msgid "%s error while fetching from %s@%s and delivering to SMTP host %s\n" msgstr "error %s al recibir de %s@%s y entregar al anfitrión SMTP %s\n" #: driver.c:1600 msgid "unknown" msgstr "desconocida" #: driver.c:1602 #, c-format msgid "%s error while fetching from %s@%s\n" msgstr "error %s al recibir de %s@%s\n" #: driver.c:1614 #, c-format msgid "post-connection command terminated with signal %d\n" msgstr "la orden de postconexión falló con la señal %d\n" #: driver.c:1616 #, c-format msgid "post-connection command failed with status %d\n" msgstr "la orden de postconexión falló con estado %d\n" #: driver.c:1635 msgid "Kerberos V4 support not linked.\n" msgstr "Soporte de Kerberos V4 no incluido.\n" #: driver.c:1643 msgid "Kerberos V5 support not linked.\n" msgstr "Soporte de Kerberos V5 no incluido.\n" #: driver.c:1654 #, c-format msgid "Option --flush is not supported with %s\n" msgstr "Opción --flush no permitida con %s\n" #: driver.c:1660 #, c-format msgid "Option --all is not supported with %s\n" msgstr "Opción --all no permitida con %s\n" #: driver.c:1669 #, c-format msgid "Option --limit is not supported with %s\n" msgstr "Opción --limit no permitida con %s\n" #: env.c:58 #, c-format msgid "" "%s: The QMAILINJECT environment variable is set.\n" "This is dangerous as it can make qmail-inject or qmail's sendmail wrapper\n" "tamper with your From: or Message-ID: headers.\n" "Try \"env QMAILINJECT= %s YOUR ARGUMENTS HERE\"\n" "%s: Abort.\n" msgstr "" "%s: La variable de entorno QMAILINJECT está configurada.\n" "Esto es peligroso dado que puede hacer que qmail-inject o el envoltorio\n" "sendmail de qmail pisoteen sus encabezados From: o Message-ID:.\n" "Pruebe “env QMAILINJECT= %s SUS ARGUMENTOS AQUÍ”\n" "%s: Abortar.\n" #: env.c:70 #, c-format msgid "" "%s: The NULLMAILER_FLAGS environment variable is set.\n" "This is dangerous as it can make nullmailer-inject or nullmailer's\n" "sendmail wrapper tamper with your From:, Message-ID: or Return-Path: headers.\n" "Try \"env NULLMAILER_FLAGS= %s YOUR ARGUMENTS HERE\"\n" "%s: Abort.\n" msgstr "" "%s: La variable de entorno NULLMAILER_FLAGS está configurada.\n" "Esto es peligroso dado que puede hacer que nullmailer-inject o el\n" "envoltorio sendmail de nullmailer pisoteen tus encabezados From:,\n" "Message-ID: o Return-Path.\n" "Prueba “env NULLMAILER_FLAGS= %s SUS ARGUMENTOS AQUÍ”\n" "%s: Abortar.\n" #: env.c:82 #, c-format msgid "%s: You don't exist. Go away.\n" msgstr "%s: No existe. Fuera.\n" #: env.c:143 msgid "Cannot find absolute path for user's home directory.\n" msgstr "No se puede encontrar la ruta absoluta para el directorio inicial del usuario.\n" #: env.c:167 msgid "Cannot find absolute path for fetchmail's home directory.\n" msgstr "No se puede encontrar la ruta absoluta para el directorio inicial de fetchmail.\n" #: env.c:200 #, c-format msgid "%s: can't determine your host!" msgstr "%s: ¡no se puede determinar su anfitrión!" #: env.c:223 #, c-format msgid "getaddrinfo failed for \"%s\": %s\n" msgstr "getaddrinfo falló para \"%s\": %s\n" #: env.c:224 msgid "Cannot find my own host in hosts database to qualify it!\n" msgstr "No puedo encontrar mi propio anfitrión en la base de datos de anfitriones para cualificarlo.\n" #: env.c:228 msgid "" "Trying to continue with unqualified hostname.\n" "DO NOT report broken Received: headers, HELO/EHLO lines or similar problems!\n" "DO repair your /etc/hosts, DNS, NIS or LDAP instead.\n" msgstr "" "Intentando continuar con un anfitrión no cualificado.\n" "NO informe de cabeceras «Received:» rotas, líneas HELO/EHLO o problemas similares\n" "REPARE su /etc/hosts, DNS, NIS o LDAP.\n" #: etrn.c:49 odmr.c:61 #, c-format msgid "%s's SMTP listener does not support ESMTP\n" msgstr "El servidor de SMTP de %s no permite ESMTP\n" #: etrn.c:55 #, c-format msgid "%s's SMTP listener does not support ETRN\n" msgstr "El servidor de SMTP de %s no permite ETRN\n" #: etrn.c:79 #, c-format msgid "Queuing for %s started\n" msgstr "Cola para %s iniciada\n" #: etrn.c:84 #, c-format msgid "No messages waiting for %s\n" msgstr "No hay mensajes esperando para %s\n" #: etrn.c:90 #, c-format msgid "Pending messages for %s started\n" msgstr "Mensajes pendientes para %s iniciados\n" #: etrn.c:94 #, c-format msgid "Unable to queue messages for node %s\n" msgstr "Incapaz de poner los mensajes para el nodo %s en la cola\n" #: etrn.c:98 #, c-format msgid "Node %s not allowed: %s\n" msgstr "Nodo %s no permitido: %s\n" #: etrn.c:102 msgid "ETRN syntax error\n" msgstr "Error de sintaxis ETRN\n" #: etrn.c:106 msgid "ETRN syntax error in parameters\n" msgstr "Error de sintaxis ETRN en los parámetros\n" #: etrn.c:110 #, c-format msgid "Unknown ETRN error %d\n" msgstr "Error ETRN desconocido %d\n" #: etrn.c:156 msgid "Option --keep is not supported with ETRN\n" msgstr "La opción --keep no se permite con ETRN\n" #: etrn.c:160 msgid "Option --flush is not supported with ETRN\n" msgstr "La opción --flush no se permite con ETRN\n" #: etrn.c:164 msgid "Option --folder is not supported with ETRN\n" msgstr "La opción --folder se permite con ETRN\n" #: etrn.c:168 msgid "Option --check is not supported with ETRN\n" msgstr "La opción --check no se permite con ETRN\n" #: fetchmail.c:144 #, c-format msgid "" "Copyright (C) 2002, 2003 Eric S. Raymond\n" "Copyright (C) 2004 Matthias Andree, Eric S. Raymond,\n" " Robert M. Funk, Graham Wilson\n" "Copyright (C) 2005 - 2012 Sunil Shetye\n" "Copyright (C) 2005 - %d Matthias Andree\n" msgstr "" "Copyright (C) 2002, 2003 Eric S. Raymond\n" "Copyright (C) 2004 Matthias Andree, Eric S. Raymond,\n" " Robert M. Funk, Graham Wilson\n" "Copyright (C) 2005 - 2012 Sunil Shetye\n" "Copyright (C) 2005 - %d Matthias Andree\n" #: fetchmail.c:150 msgid "" "Fetchmail comes with ABSOLUTELY NO WARRANTY. This is free software, and you\n" "are welcome to redistribute it under certain conditions. For details,\n" "please see the file COPYING in the source or documentation directory.\n" msgstr "" "Fetchmail viene SIN GARANTÍA DE NINGUNA CLASE. Esto es software libre y se\n" "le anima a redistribuirlo bajo ciertas concidiones. Para conocer más detalles,\n" "vea el archivo COPYING en la fuente o en el directorio de documentación.\n" #: fetchmail.c:190 msgid "WARNING: Running as root is discouraged.\n" msgstr "AVISO: se recomienda no ejecutar esta aplicación como root.\n" #: fetchmail.c:202 msgid "fetchmail: invoked with" msgstr "fetchmail: invocado con" #: fetchmail.c:225 msgid "could not get current working directory\n" msgstr "no fue posible obtener el directorio de trabajo actual\n" #: fetchmail.c:310 #, c-format msgid "This is fetchmail release %s" msgstr "Esta es la versión %s de fetchmail" #: fetchmail.c:313 #, c-format msgid "" "Compiled with SSL library %#lx \"%s\"\n" "Run-time uses SSL library %#lx \"%s\"\n" msgstr "" "Compilado con la biblioteca SSL %#lx \"%s\"\n" "El tiempo de ejecución usa la biblioteca SSL %#lx \"%s\"\n" #: fetchmail.c:317 #, c-format msgid "" "OpenSSL: %s\n" "Engines: %s\n" msgstr "" "OpenSSL: %s\n" "Motores: %s\n" #: fetchmail.c:321 msgid "WARNING: Your SSL/TLS library does not support TLS v1.3.\n" msgstr "AVISO: Su biblioteca de SSL/TLS no admite TLS v1.3.\n" #: fetchmail.c:326 msgid "ERROR: Compiled against LibreSSL, which is a copyright violation for lack of GPL clause 2b exception. See COPYING. Aborting.\n" msgstr "ERROR: Compilado contra LibreSSL, lo cual es una violación de copyright por la falta de la cláusula GPl excepción 2b. Consulte COPYING. Abortando.\n" #: fetchmail.c:330 msgid "WARNING: Compiled without SSL/TLS.\n" msgstr "AVISO: Compilado sin SSL/TLS.\n" #: fetchmail.c:356 msgid "The nodetach option is in effect, ignoring logfile option.\n" msgstr "La opción nodetach está en efecto, se ignora la opción logfile.\n" #: fetchmail.c:363 msgid "Not running in daemon mode, ignoring logfile option.\n" msgstr "No se está ejecutando en segundo plano, se ignora la opción logfile.\n" #: fetchmail.c:370 #, c-format msgid "Logfile \"%s\" does not exist, ignoring logfile option.\n" msgstr "El archivo de registro \"%s\" no existe, se ignora la opción logfile.\n" #: fetchmail.c:376 #, c-format msgid "Logfile \"%s\" is not writable, aborting.\n" msgstr "No se puede escribir el archivo de registro \"%s\", abortando.\n" #: fetchmail.c:394 #, c-format msgid "syslog and logfile options are both set, ignoring syslog, and logging to %s" msgstr "las opciones syslog y logfile están activas al mismo tiempo, se ignora syslog y se guarda el registro a %s" #: fetchmail.c:485 #, c-format msgid "Taking options from command line%s%s\n" msgstr "Tomando opciones de la línea de órdenes%s%s\n" #: fetchmail.c:486 msgid " and " msgstr " y " #: fetchmail.c:491 #, c-format msgid "No mailservers set up -- perhaps %s is missing?\n" msgstr "No hay servidores de correo configurados -- ¿puede faltar %s?\n" #: fetchmail.c:512 msgid "fetchmail: no mailservers have been specified.\n" msgstr "fetchmail: no se han especificado servidores de correo.\n" #: fetchmail.c:524 msgid "fetchmail: no other fetchmail is running\n" msgstr "fetchmail: ningún otro fetchmail se está ejecutando\n" #: fetchmail.c:530 #, c-format msgid "fetchmail: error killing %s fetchmail at %ld; bailing out.\n" msgstr "fetchmail: error terminando %s fetchmail en %ld; abandonando.\n" #: fetchmail.c:531 fetchmail.c:540 msgid "background" msgstr "segundo plano" #: fetchmail.c:531 fetchmail.c:540 msgid "foreground" msgstr "primer plano" #: fetchmail.c:539 #, c-format msgid "fetchmail: %s fetchmail at %ld killed.\n" msgstr "fetchmail: %s fetchmail en %ld terminado.\n" #: fetchmail.c:562 msgid "fetchmail: can't check mail while another fetchmail to same host is running.\n" msgstr "fetchmail: no es posible verificar el correo mientras otro fetchmail está en ejecución hacia el mismo anfitrión\n" #: fetchmail.c:568 #, c-format msgid "fetchmail: can't poll specified hosts with another fetchmail running at %ld.\n" msgstr "fetchmail: no es posible consultar los anfitriones especificados con otro fetchmail en ejecución en %ld.\n" #: fetchmail.c:575 #, c-format msgid "fetchmail: another foreground fetchmail is running at %ld.\n" msgstr "fetchmail: otro fetchmail está en ejecución en primer plano en %ld.\n" #: fetchmail.c:585 msgid "fetchmail: can't accept options while a background fetchmail is running.\n" msgstr "fetchmail: no es posible aceptar opciones mientras un fetchmail está en ejecución en segundo plano.\n" #: fetchmail.c:597 #, c-format msgid "fetchmail: background fetchmail at %ld awakened.\n" msgstr "fetchmail: fetchmail %ld en segundo plano despertado.\n" #: fetchmail.c:609 #, c-format msgid "fetchmail: elder sibling at %ld died mysteriously.\n" msgstr "fetchmail: el proceso hijo más antiguo en %ld murió misteriosamente.\n" #: fetchmail.c:624 #, c-format msgid "fetchmail: can't find a password for %s@%s.\n" msgstr "fetchmail: no se puede encontrar una contraseña para %s@%s.\n" #: fetchmail.c:628 #, c-format msgid "Enter password for %s@%s: " msgstr "Introduzca contraseña para %s@%s: " #: fetchmail.c:670 msgid "fetchmail: Cannot detach into background. Aborting.\n" msgstr "fetchmail: No se puede separar en segundo plano. Abortando.\n" #: fetchmail.c:674 #, c-format msgid "starting fetchmail %s daemon\n" msgstr "iniciando fetchmail %s en segundo plano\n" #: fetchmail.c:690 fetchmail.c:692 #, c-format msgid "could not open %s to append logs to\n" msgstr "no fue posible abrir %s para anexarle mensajes de registro\n" #: fetchmail.c:711 msgid "--check mode enabled, not fetching mail\n" msgstr "--check mode activado, no recibir correo\n" #: fetchmail.c:733 #, c-format msgid "couldn't time-check %s (error %d)\n" msgstr "no se pudo temporizar %s (error %d)\n" #: fetchmail.c:738 #, c-format msgid "restarting fetchmail (%s changed)\n" msgstr "reiniciando fetchmail (%s cambió)\n" #: fetchmail.c:742 msgid "attempt to re-exec may fail as directory has not been restored\n" msgstr "el intento de volver a ejectuar puede fallar dado que el directorio no se ha restaurado\n" #: fetchmail.c:768 msgid "attempt to re-exec fetchmail failed\n" msgstr "el intento de volver a ejecutar fetchmail falló\n" #: fetchmail.c:798 #, c-format msgid "poll of %s skipped (failed authentication or too many timeouts)\n" msgstr "la consulta %s se omitió (fallo en la autenticación o demasiados excesos de espera)\n" #: fetchmail.c:810 #, c-format msgid "interval not reached, not querying %s\n" msgstr "intervalo no alcanzado, no se consultará %s\n" #: fetchmail.c:848 msgid "Query status=0 (SUCCESS)\n" msgstr "Estado de la consulta=0 (SUCCESS)\n" #: fetchmail.c:850 msgid "Query status=1 (NOMAIL)\n" msgstr "Estado de la consulta=1 (NOMAIL)\n" #: fetchmail.c:852 msgid "Query status=2 (SOCKET)\n" msgstr "Estado de la consulta=2 (SOCKET)\n" #: fetchmail.c:854 msgid "Query status=3 (AUTHFAIL)\n" msgstr "Estado de la consulta=3 (AUTHFAIL)\n" #: fetchmail.c:856 msgid "Query status=4 (PROTOCOL)\n" msgstr "Estado de la consulta=4 (PROTOCOL)\n" #: fetchmail.c:858 msgid "Query status=5 (SYNTAX)\n" msgstr "Estado de la consulta=5 (SYNTAX)\n" #: fetchmail.c:860 msgid "Query status=6 (IOERR)\n" msgstr "Estado de la consulta=6 (IOERR)\n" #: fetchmail.c:862 msgid "Query status=7 (ERROR)\n" msgstr "Estado de la consulta=7 (ERROR)\n" #: fetchmail.c:864 msgid "Query status=8 (EXCLUDE)\n" msgstr "Estado de la consulta=8 (EXCLUDE)\n" #: fetchmail.c:866 msgid "Query status=9 (LOCKBUSY)\n" msgstr "Estado de la consulta=9 (LOCKBUSY)\n" #: fetchmail.c:868 msgid "Query status=10 (SMTP)\n" msgstr "Estado de la consulta=10 (SMTP)\n" #: fetchmail.c:870 msgid "Query status=11 (DNS)\n" msgstr "Estado de la consulta=11 (DNS)\n" #: fetchmail.c:872 msgid "Query status=12 (BSMTP)\n" msgstr "Estado de la consulta=12 (BSMTP)\n" #: fetchmail.c:874 msgid "Query status=13 (MAXFETCH)\n" msgstr "Estado de la consulta=13 (MAXFETCH)\n" #: fetchmail.c:876 #, c-format msgid "Query status=%d\n" msgstr "Estado de la consulta=%d\n" #: fetchmail.c:918 msgid "All connections are wedged. Exiting.\n" msgstr "Todas las conexiones están trabadas. Saliendo.\n" #: fetchmail.c:926 #, c-format msgid "sleeping at %s for %d seconds\n" msgstr "durmiendo en %s por %d segundos\n" #: fetchmail.c:950 #, c-format msgid "awakened by %s\n" msgstr "despertado por %s\n" #: fetchmail.c:953 #, c-format msgid "awakened by signal %d\n" msgstr "despertado por la señal %d\n" #: fetchmail.c:961 #, c-format msgid "awakened at %s\n" msgstr "despertado en %s\n" #: fetchmail.c:966 #, c-format msgid "normal termination, status %d\n" msgstr "terminación normal, estado %d\n" #: fetchmail.c:1130 msgid "couldn't time-check the run-control file\n" msgstr "no se pudo temporizar el archivo de control de ejecución\n" #: fetchmail.c:1164 #, c-format msgid "Warning: multiple mentions of host %s in config file\n" msgstr "Aviso: múltiples menciones del anfitrión %s en el archivo de configuración\n" #: fetchmail.c:1203 msgid "fetchmail: Error: multiple \"defaults\" records in config file, or \"defaults\" is not the first record.\n" msgstr "fetchmail: Error: múltiples registros «defaults» en el archivo de configuración, o «defaults» no es el primer registro.\n" #: fetchmail.c:1333 msgid "SSL support is not compiled in.\n" msgstr "El soporte de SSL no se compiló.\n" #: fetchmail.c:1340 msgid "KERBEROS v4 support is configured, but not compiled in.\n" msgstr "El soporte de KERBEROS v4 está configurado pero no compilado\n" #: fetchmail.c:1346 msgid "KERBEROS v5 support is configured, but not compiled in.\n" msgstr "El soporte de KERBEROS v5 está configurado pero no compilado\n" #: fetchmail.c:1352 msgid "GSSAPI support is configured, but not compiled in.\n" msgstr "El soporte de GSSAPI está configurado pero no compilado\n" #: fetchmail.c:1382 #, c-format msgid "fetchmail: warning: no DNS available to check multidrop fetches from %s\n" msgstr "fetchmail: aviso: no hay DNS disponible para verificar recepciones «multidrop» de %s\n" #: fetchmail.c:1393 #, c-format msgid "warning: multidrop for %s requires envelope option!\n" msgstr "aviso: ¡«multidrop» para %s requiere la opción «envelope»!\n" #: fetchmail.c:1394 msgid "warning: Do not ask for support if all mail goes to postmaster!\n" msgstr "aviso: ¡no pida soporte técnico si todo el correo está dirigido al postmaster!\n" #: fetchmail.c:1411 #, c-format msgid "fetchmail: %s configuration invalid, specify positive port number for service or port\n" msgstr "fetchmail: la configuración %s no es válida, especifique un número de puerto positivo para el servicio el puerto\n" #: fetchmail.c:1418 #, c-format msgid "fetchmail: %s configuration invalid, RPOP requires a privileged port\n" msgstr "fetchmail: la configuración %s no es válida, RPOP requiere un puerto privilegiado\n" #: fetchmail.c:1424 #, c-format msgid "WARNING: %s configuration invalid, you normally need --ssl for port 995/service pop3s.\n" msgstr "AVISO: la configuración %s no es válida, normalmente necesita --ssl para el puerto 995/servicio pop3s.\n" #: fetchmail.c:1425 #, c-format msgid "WARNING: %s configuration invalid, you normally need port 995/service pop3s for --ssl.\n" msgstr "AVISO: la configuración %s no es válida, normalmente necesita el puerto 995/servicio pop3s para --ssl.\n" #: fetchmail.c:1428 #, c-format msgid "WARNING: %s configuration invalid, you normally need --ssl for port 993/service imaps.\n" msgstr "AVISO: la configuración %s no es válida, normalmente necesita --ssl para el puerto 993/servicio imaps.\n" #: fetchmail.c:1429 #, c-format msgid "WARNING: %s configuration invalid, you normally need port 993/service imaps for --ssl.\n" msgstr "AVISO: la configuración %s no es válida, normalmente necesita el puerto 993/servicio imaps para --ssl.\n" #: fetchmail.c:1447 #, c-format msgid "%s configuration invalid, LMTP can't use default SMTP port\n" msgstr "configuración de %s inválida, LMTP no puede usar el puerto SMTP predeterminado\n" #: fetchmail.c:1461 msgid "Both fetchall and keep on in daemon or idle mode is a mistake!\n" msgstr "Ambos, «fetchall» y «keep on» en el demonio o en el modo de espera, es un error\n" #: fetchmail.c:1471 msgid "fetchmail: Error: idle mode does not work for multiple folders or accounts!\n" msgstr "fetchmail: Error: ¡el modo idle no funciona para carpetas o cuentas múltiples!\n" #: fetchmail.c:1495 #, c-format msgid "terminated with signal %d\n" msgstr "terminado con señal %d\n" #: fetchmail.c:1568 #, c-format msgid "%s querying %s (protocol %s) at %s: poll started\n" msgstr "%s consultando a %s (protocolo %s) en %s: pregunta iniciada\n" #: fetchmail.c:1593 msgid "POP2 support is not configured.\n" msgstr "El soporte de POP2 no está configurado.\n" #: fetchmail.c:1605 msgid "POP3 support is not configured.\n" msgstr "El soporte de POP3 no está configurado.\n" #: fetchmail.c:1615 msgid "IMAP support is not configured.\n" msgstr "El soporte de IMAP no está configurado.\n" #: fetchmail.c:1621 msgid "ETRN support is not configured.\n" msgstr "El soporte de ETRN no está configurado.\n" #: fetchmail.c:1629 msgid "ODMR support is not configured.\n" msgstr "El soporte de ODMR no está configurado.\n" #: fetchmail.c:1636 msgid "unsupported protocol selected.\n" msgstr "se seleccionó un protocolo no permitido.\n" #: fetchmail.c:1647 #, c-format msgid "%s querying %s (protocol %s) at %s: poll completed\n" msgstr "%s interrogando %s (protocolo %s) en %s: consulta terminada\n" #: fetchmail.c:1672 #, c-format msgid "Poll interval is %d seconds\n" msgstr "El intervalo entre consultas es de %d segundos\n" #: fetchmail.c:1674 #, c-format msgid "Logfile is %s\n" msgstr "El archivo de registro es %s\n" #: fetchmail.c:1676 #, c-format msgid "Idfile is %s\n" msgstr "El archivo con identificaciones es %s\n" #: fetchmail.c:1679 msgid "Progress messages will be logged via syslog\n" msgstr "Los mensajes de progreso se registrarán vía syslog\n" #: fetchmail.c:1682 msgid "Fetchmail will masquerade and will not generate Received\n" msgstr "Fetchmail enmascarará y no generará «Received»\n" #: fetchmail.c:1684 msgid "Fetchmail will show progress dots even in logfiles.\n" msgstr "Fetchmail mostrará puntos de progreso incluso en los archivos de registro.\n" #: fetchmail.c:1686 #, c-format msgid "Fetchmail will forward misaddressed multidrop messages to %s.\n" msgstr "Fetchmail reenviará mensajes «multidrop» mal direccionados a %s.\n" #: fetchmail.c:1690 msgid "Fetchmail will direct error mail to the postmaster.\n" msgstr "Fetchmail dirigirá el correo de error al «postmaster».\n" #: fetchmail.c:1692 msgid "Fetchmail will direct error mail to the sender.\n" msgstr "Fetchmail dirigirá el correo de error al remitente.\n" #: fetchmail.c:1695 msgid "Fetchmail will treat permanent errors as permanent (drop messages).\n" msgstr "Fetchmail tratará los errores permanentes como permanentes (soltar mensajes).\n" #: fetchmail.c:1697 msgid "Fetchmail will treat permanent errors as temporary (keep messages).\n" msgstr "Fetchmail tratará los errores permanentes como temporales (mantener mensajes).\n" #: fetchmail.c:1704 #, c-format msgid "Options for retrieving from %s@%s:\n" msgstr "Opciones para recibir de %s@%s:\n" #: fetchmail.c:1708 #, c-format msgid " Mail will be retrieved via %s\n" msgstr " El correo se recibirá vía %s\n" #: fetchmail.c:1711 #, c-format msgid " Poll of this server will occur every %d interval.\n" msgid_plural " Poll of this server will occur every %d intervals.\n" msgstr[0] " La consulta de este servidor ocurrirá cada %d intervalo.\n" msgstr[1] " La consulta de este servidor ocurrirá cada %d intervalos.\n" #: fetchmail.c:1715 #, c-format msgid " True name of server is %s.\n" msgstr " El nombre verdadero del servidor es %s.\n" #: fetchmail.c:1718 msgid " This host will not be queried when no host is specified.\n" msgstr " Este anfitrión no será consultado cuando no se especifica un anfitrión.\n" #: fetchmail.c:1719 msgid " This host will be queried when no host is specified.\n" msgstr " Este anfitrión será consultado cuando no se especifique ningún anfitrión.\n" #: fetchmail.c:1723 msgid " Password will be prompted for.\n" msgstr " Se pedirá la contraseña.\n" #: fetchmail.c:1727 #, c-format msgid " APOP secret = \"%s\".\n" msgstr " Secreto APOP = «%s».\n" #: fetchmail.c:1730 #, c-format msgid " RPOP id = \"%s\".\n" msgstr " Identidad RPOP = «%s».\n" #: fetchmail.c:1733 #, c-format msgid " Password = \"%s\".\n" msgstr " Contraseña = «%s».\n" #: fetchmail.c:1742 #, c-format msgid " Protocol is KPOP with Kerberos %s authentication" msgstr " El protocolo es KPOP con autenticación Kerberos %s" #: fetchmail.c:1745 #, c-format msgid " Protocol is %s" msgstr " El protocolo es %s" #: fetchmail.c:1747 #, c-format msgid " (using service %s)" msgstr " (usando servicio %s)" #: fetchmail.c:1749 msgid " (using default port)" msgstr " (usando puerto predeterminado)" #: fetchmail.c:1751 msgid " (forcing UIDL use)" msgstr " (forzando el uso de UIDL)" #: fetchmail.c:1757 msgid " All available authentication methods will be tried.\n" msgstr " Se probarán todos los métodos de autenticación disponibles.\n" #: fetchmail.c:1760 msgid " Password authentication will be forced.\n" msgstr " Se forzará autenticación con contraseña.\n" #: fetchmail.c:1763 msgid " MSN authentication will be forced.\n" msgstr " Se forzará autenticación MSN.\n" #: fetchmail.c:1766 msgid " NTLM authentication will be forced.\n" msgstr " Se forzará autenticación NTLM.\n" #: fetchmail.c:1769 msgid " OTP authentication will be forced.\n" msgstr " Se forzará autenticación OTP.\n" #: fetchmail.c:1772 msgid " CRAM-MD5 authentication will be forced.\n" msgstr " Se forzará autenticación CRAM-MD5.\n" #: fetchmail.c:1775 msgid " GSSAPI authentication will be forced.\n" msgstr " Se forzará autenticación GSSAPI.\n" #: fetchmail.c:1778 msgid " Kerberos V4 authentication will be forced.\n" msgstr " Se forzará autenticación Kerberos V4.\n" #: fetchmail.c:1781 msgid " Kerberos V5 authentication will be forced.\n" msgstr " Se forzará autenticación Kerberos V5.\n" #: fetchmail.c:1784 msgid " End-to-end encryption assumed.\n" msgstr " Se asume cifrado de un extremo a otro.\n" #: fetchmail.c:1788 #, c-format msgid " Mail service principal is: %s\n" msgstr " El principal del servicio de correo es: %s\n" #: fetchmail.c:1791 msgid " SSL encrypted sessions enabled.\n" msgstr " Sesiones cifradas con SSL activadas.\n" #: fetchmail.c:1793 #, c-format msgid " SSL protocol: %s.\n" msgstr " Protocolo SSL: %s.\n" #: fetchmail.c:1795 msgid " SSL server certificate checking enabled.\n" msgstr " Comprobación de certificados SSL del servidor activada.\n" #: fetchmail.c:1797 msgid " SSL server certificate checking disabled.\n" msgstr " Comprobación de certificados SSL del servidor desactivada.\n" #: fetchmail.c:1799 #, c-format msgid " SSL default trusted certificate file: %s\n" msgstr " Fichero del certificado SSL de confianza predeterminado: %s\n" #: fetchmail.c:1801 #, c-format msgid " SSL trusted certificate file: %s\n" msgstr " Fichero del certificado SSL de confianza: %s\n" #: fetchmail.c:1802 #, c-format msgid " SSL default trusted certificate directory: %s\n" msgstr " Directorio del certificado SSL de confianza predeterminado: %s\n" #: fetchmail.c:1804 #, c-format msgid " SSL trusted certificate directory: %s\n" msgstr " Directorio del certificado SSL de confianza: %s\n" #: fetchmail.c:1806 #, c-format msgid " SSL server CommonName: %s\n" msgstr "«CommonName» del servidor SSL: %s\n" #: fetchmail.c:1808 #, c-format msgid " SSL key fingerprint (checked against the server key): %s\n" msgstr " Huella digital de la clave SSL (comprobada con la clave del servidor): %s\n" #: fetchmail.c:1811 #, c-format msgid " Server nonresponse timeout is %d seconds" msgstr " El tiempo de espera para respuestas del servidor es de %d segundos" #: fetchmail.c:1813 msgid " (default).\n" msgstr " (predeterminado).\n" #: fetchmail.c:1820 msgid " Default mailbox selected.\n" msgstr " La casilla predeterminada está seleccionada.\n" #: fetchmail.c:1825 msgid " Selected mailboxes are:" msgstr " Las casillas seleccionadas son:" #: fetchmail.c:1831 msgid " All messages will be retrieved (--all on).\n" msgstr " Todos los mensajes se recibirán (--all on).\n" #: fetchmail.c:1832 msgid " Only new messages will be retrieved (--all off).\n" msgstr " Sólo se recibirán mensajes nuevos (--all off).\n" #: fetchmail.c:1834 msgid " Fetched messages will be kept on the server (--keep on).\n" msgstr " Los mensajes recibidos permanecerán en el servidor (--keep on).\n" #: fetchmail.c:1835 msgid " Fetched messages will not be kept on the server (--keep off).\n" msgstr " Los mensajes recibidos se eliminarán del servidor (--keep off).\n" #: fetchmail.c:1837 msgid " Old messages will be flushed before message retrieval (--flush on).\n" msgstr " Los mensajes viejos serán eliminados antes de recibir nuevos (--flush on).\n" #: fetchmail.c:1838 msgid " Old messages will not be flushed before message retrieval (--flush off).\n" msgstr " No se eliminarán los mensajes viejos antes de recibir nuevos (--flush off).\n" #: fetchmail.c:1840 msgid " Oversized messages will be flushed before message retrieval (--limitflush on).\n" msgstr " Los mensajes demasiado grandes se eliminarán antes de recibir nuevos (--limitflush on).\n" #: fetchmail.c:1841 msgid " Oversized messages will not be flushed before message retrieval (--limitflush off).\n" msgstr " Los mensajes demasiado garndes no se eliminarán antes de recibir nuevos (--limitflush off).\n" #: fetchmail.c:1843 msgid " Rewrite of server-local addresses is enabled (--norewrite off).\n" msgstr " Se reescribirán las direcciones locales (--norewrite off).\n" #: fetchmail.c:1844 msgid " Rewrite of server-local addresses is disabled (--norewrite on).\n" msgstr " No se reescribirán las direcciones locales (--norewrite on).\n" #: fetchmail.c:1846 msgid " Carriage-return stripping is enabled (stripcr on).\n" msgstr " Los retornos de carro se eliminarán (stripcr on).\n" #: fetchmail.c:1847 msgid " Carriage-return stripping is disabled (stripcr off).\n" msgstr " No se eliminarán los retornos de carro (stripcr off).\n" #: fetchmail.c:1849 msgid " Carriage-return forcing is enabled (forcecr on).\n" msgstr " Se añadirán retornos de carro (forcecr on).\n" #: fetchmail.c:1850 msgid " Carriage-return forcing is disabled (forcecr off).\n" msgstr " No se añadirán retornos de carro (forcecr off).\n" #: fetchmail.c:1852 msgid " Interpretation of Content-Transfer-Encoding is disabled (pass8bits on).\n" msgstr " Se ignorará el contenido de «Content-Transfer-Encoding» (pass8bits on).\n" #: fetchmail.c:1853 msgid " Interpretation of Content-Transfer-Encoding is enabled (pass8bits off).\n" msgstr " Se respetará el contenido de «Content-Transfer-Encoding» (pass8bits off).\n" #: fetchmail.c:1855 msgid " MIME decoding is enabled (mimedecode on).\n" msgstr " La decodificación MIME está activada (mimedecode on).\n" #: fetchmail.c:1856 msgid " MIME decoding is disabled (mimedecode off).\n" msgstr " La decodificación MIME está desactivada (mimedecode off).\n" #: fetchmail.c:1858 msgid " Idle after poll is enabled (idle on).\n" msgstr " Se permanecerá a la espera tras la consulta (idle on).\n" #: fetchmail.c:1859 msgid " Idle after poll is disabled (idle off).\n" msgstr " No se permanecerá a la espera tras la consulta (idle off).\n" #: fetchmail.c:1861 msgid " Nonempty Status lines will be discarded (dropstatus on)\n" msgstr " Las líneas «Status» que no estén vacías se descartarán (dropstatus on).\n" #: fetchmail.c:1862 msgid " Nonempty Status lines will be kept (dropstatus off)\n" msgstr " Las líneas «Status» que no estén vacías se conservarán (dropstatus off).\n" #: fetchmail.c:1864 msgid " Delivered-To lines will be discarded (dropdelivered on)\n" msgstr " Las líneas «Delivered-To» se descartarán (dropdelivered on).\n" #: fetchmail.c:1865 msgid " Delivered-To lines will be kept (dropdelivered off)\n" msgstr " Las líneas «Delivered-To» se conservarán (dropdelivered off).\n" #: fetchmail.c:1869 #, c-format msgid " Message size limit is %d octets (--limit %d).\n" msgstr " El tamaño de los mensajes está limitado a %d octetos (--limit %d).\n" #: fetchmail.c:1872 msgid " No message size limit (--limit 0).\n" msgstr " El tamaño de los mensajes no está limitado (--limit 0).\n" #: fetchmail.c:1874 #, c-format msgid " Message size warning interval is %d seconds (--warnings %d).\n" msgstr " Los avisos sobre el tamaño de los mensajes se darán cada %d segundos (--warnings %d).\n" #: fetchmail.c:1877 msgid " Size warnings on every poll (--warnings 0).\n" msgstr " Los avisos sobre el tamaño de los mensajes se darán en cada consulta (--warnings 0).\n" #: fetchmail.c:1880 #, c-format msgid " Received-message limit is %d (--fetchlimit %d).\n" msgstr " La cantidad de mensajes recibidos está limitada a %d (--fetchlimit %d).\n" #: fetchmail.c:1883 msgid " No received-message limit (--fetchlimit 0).\n" msgstr " La cantidad de mensajes recibidos no está limitada (--fetchlimit 0).\n" #: fetchmail.c:1885 #, c-format msgid " Fetch message size limit is %d (--fetchsizelimit %d).\n" msgstr " El límite de tamaño para los mensajes recibidos es de %d (--fetchsizelimit %d).\n" #: fetchmail.c:1888 msgid " No fetch message size limit (--fetchsizelimit 0).\n" msgstr " El tamaño de los mensajes no está limitado (--fetchsizelimit 0).\n" #: fetchmail.c:1892 msgid " Do binary search of UIDs during each poll (--fastuidl 1).\n" msgstr " Utilizar búsqueda binaria de UID durante cada consulta (--fastuidl 1).\n" #: fetchmail.c:1894 #, c-format msgid " Do binary search of UIDs during %d out of %d polls (--fastuidl %d).\n" msgstr " Utilizar búsqueda binaria de UID durante %d de cada %d consultas (--fastuidl %d).\n" #: fetchmail.c:1897 msgid " Do linear search of UIDs during each poll (--fastuidl 0).\n" msgstr " Utilizar búsqueda lineal de UID durante cada consulta (--fastuidl 0).\n" #: fetchmail.c:1899 #, c-format msgid " SMTP message batch limit is %d.\n" msgstr " El límite de mensajes por lote SMTP es %d.\n" #: fetchmail.c:1901 msgid " No SMTP message batch limit (--batchlimit 0).\n" msgstr " La cantidad de mensajes emitidos no está limitada (--batchlimit 0).\n" #: fetchmail.c:1905 #, c-format msgid " Deletion interval between expunges forced to %d (--expunge %d).\n" msgstr " El intervalo de borrado entre eliminaciones está forzado a %d (--expunge %d).\n" #: fetchmail.c:1907 msgid " No forced expunges (--expunge 0).\n" msgstr " No forzar eliminaciones (--expunge 0).\n" #: fetchmail.c:1914 msgid " Domains for which mail will be fetched are:" msgstr " Los dominios para los cuales se recibirá correo son:" #: fetchmail.c:1919 fetchmail.c:1939 msgid " (default)" msgstr " (predeterminado)" #: fetchmail.c:1924 #, c-format msgid " Messages will be appended to %s as BSMTP\n" msgstr " Los mensajes serán anexados a %s como BSMTP\n" #: fetchmail.c:1926 #, c-format msgid " Messages will be delivered with \"%s\".\n" msgstr " Los mensajes se entregarán con «%s».\n" #: fetchmail.c:1933 #, c-format msgid " Messages will be %cMTP-forwarded to:" msgstr " Los mensajes se reenviarán con %cMTP a:" #: fetchmail.c:1944 #, c-format msgid " Host part of MAIL FROM line will be %s\n" msgstr " El nombre del anfitrión en la línea «MAIL FROM» será %s\n" #: fetchmail.c:1947 #, c-format msgid " Address to be put in RCPT TO lines shipped to SMTP will be %s\n" msgstr " La dirección a poner en las líneas RCPT TO enviadas al STMP será %s\n" #: fetchmail.c:1956 msgid " Recognized listener spam block responses are:" msgstr " Las respuestas de servidor reconocidas como bloques de basura son:" #: fetchmail.c:1962 msgid " Spam-blocking disabled\n" msgstr " El bloqueo de basura está desactivado\n" #: fetchmail.c:1965 #, c-format msgid " Server connection will be brought up with \"%s\".\n" msgstr " La conexión al servidor se iniciará con «%s».\n" #: fetchmail.c:1968 msgid " No pre-connection command.\n" msgstr " No hay orden de preconexión.\n" #: fetchmail.c:1970 #, c-format msgid " Server connection will be taken down with \"%s\".\n" msgstr " La conexión al servidor se terminará con «%s».\n" #: fetchmail.c:1973 msgid " No post-connection command.\n" msgstr " No hay orden de postconexión.\n" #: fetchmail.c:1976 msgid " No localnames declared for this host.\n" msgstr " No hay nombres locales declarados para este anfitrión.\n" #: fetchmail.c:1986 msgid " Multi-drop mode: " msgstr " Modo «multi-drop»: " #: fetchmail.c:1988 msgid " Single-drop mode: " msgstr " Modo «single-drop»: " #: fetchmail.c:1990 #, c-format msgid "%d local name recognized.\n" msgid_plural "%d local names recognized.\n" msgstr[0] "%d nombre local reconocido.\n" msgstr[1] "%d nombres locales reconocidos.\n" #: fetchmail.c:2005 msgid " DNS lookup for multidrop addresses is enabled.\n" msgstr " Se consultará al DNS por las direcciones «multidrop».\n" #: fetchmail.c:2006 msgid " DNS lookup for multidrop addresses is disabled.\n" msgstr " No se consultará al DNS por las direcciones «multidrop».\n" #: fetchmail.c:2010 msgid " Server aliases will be compared with multidrop addresses by IP address.\n" msgstr " Se comparará la dirección IP de los alias del servidor contra las direcciones «multidrop».\n" #: fetchmail.c:2012 msgid " Server aliases will be compared with multidrop addresses by name.\n" msgstr " Se comparará el nombre de los alias del servidor contra las direcciones «multidrop».\n" #: fetchmail.c:2015 msgid " Envelope-address routing is disabled\n" msgstr " El enrutado por la dirección de la envoltura está desactivado\n" #: fetchmail.c:2018 #, c-format msgid " Envelope header is assumed to be: %s\n" msgstr " Se asume que el encabezado de la envoltura es: %s\n" #: fetchmail.c:2021 #, c-format msgid " Number of envelope headers to be skipped over: %d\n" msgstr " Número del encabezado de la envoltura a omitir: %d\n" #: fetchmail.c:2024 #, c-format msgid " Prefix %s will be removed from user id\n" msgstr " El prefijo %s se eliminará del nombre de usuario\n" #: fetchmail.c:2027 msgid " No prefix stripping\n" msgstr " No se eliminará ningún prefijo\n" #: fetchmail.c:2032 msgid " Predeclared mailserver aliases:" msgstr " Alias predeclarados del servidor de correo:" #: fetchmail.c:2040 msgid " Local domains:" msgstr " Dominios locales:" #: fetchmail.c:2050 #, c-format msgid " Connection must be through interface %s.\n" msgstr " La conexión debe ser a través de la interfaz %s.\n" #: fetchmail.c:2052 msgid " No interface requirement specified.\n" msgstr " No se especificaron requerimientos de la interfaz.\n" #: fetchmail.c:2054 #, c-format msgid " Polling loop will monitor %s.\n" msgstr " El bucle de consulta se monitorizará %s.\n" #: fetchmail.c:2056 msgid " No monitor interface specified.\n" msgstr " No se especificó una interfaz de monitorización.\n" #: fetchmail.c:2060 #, c-format msgid " Server connections will be made via plugin %s (--plugin %s).\n" msgstr " Las conexiones al servidor se llevarán a cabo a través del complemento %s (--plugin %s).\n" #: fetchmail.c:2062 msgid " No plugin command specified.\n" msgstr " No se especificó una orden para el complemento.\n" #: fetchmail.c:2064 #, c-format msgid " Listener connections will be made via plugout %s (--plugout %s).\n" msgstr " Las conexiones al cliente se llevarán a cabo a través del «plugout» %s (--plugout %s).\n" #: fetchmail.c:2066 msgid " No plugout command specified.\n" msgstr " No se especificó una orden para el «plugout».\n" #: fetchmail.c:2073 msgid " No UIDs saved from this host.\n" msgstr " No hay UID guardadas de este anfitrión.\n" #: fetchmail.c:2076 #, c-format msgid " %d UIDs saved.\n" msgstr " %d UID guardadas.\n" #: fetchmail.c:2082 msgid " Poll trace information will be added to the Received header.\n" msgstr " Se añadirá información de traceado sobre la consulta al encabezado «Received».\n" #: fetchmail.c:2084 msgid " No poll trace information will be added to the Received header.\n" msgstr " No se añadirá información de traceado sobre la consulta al encabezado «Received».\n" #: fetchmail.c:2089 msgid " Messages with bad headers will be rejected.\n" msgstr " Los mensajes con encabezados erróneos serán rechazados.\n" #: fetchmail.c:2092 msgid " Messages with bad headers will be passed on.\n" msgstr " Los mensajes con encabezados erróneos serán admitidos.\n" #: fetchmail.c:2097 #, c-format msgid " Pass-through properties \"%s\".\n" msgstr " Propiedades de paso «%s».\n" #: fm_getaddrinfo.c:23 fm_getaddrinfo.c:30 #, c-format msgid "Cannot modify signal mask: %s" msgstr "No se puede modificar la máscara de señal: %s" #: fm_realpath.c:35 msgid "Your operating system neither defines PATH_MAX nor will it accept realpath(f, NULL). Aborting.\n" msgstr "Su sistema operativo no define PATH_MAX ni acepta realpath(f, NULL). Abortando.\n" #: getpass.c:71 msgid "ERROR: no support for getpassword() routine\n" msgstr "ERROR: no hay soporte para la rutina getpassword()\n" #: getpass.c:193 msgid "" "\n" "Caught SIGINT... bailing out.\n" msgstr "" "\n" "SIGINT recibido... abortando.\n" #: gssapi.c:53 #, c-format msgid "GSSAPI error in gss_display_status called from <%s>\n" msgstr "Error de GSSAPI en gss_display_status llamado desde <%s>\n" #: gssapi.c:56 #, c-format msgid "GSSAPI error %s: %.*s\n" msgstr "Error de GSSAPI %s: %.*s\n" #: gssapi.c:91 #, c-format msgid "Couldn't get service name for [%s]\n" msgstr "No fue posible obtener el nombre de servicio para [%s]\n" #: gssapi.c:96 #, c-format msgid "Using service name [%s]\n" msgstr "Usando nombre de servicio [%s]\n" #: gssapi.c:123 msgid "No suitable GSSAPI credentials found. Skipping GSSAPI authentication.\n" msgstr "No se encontraron credenciales GSSAPI adecuadas. Se salta la autenticación GSSAPI.\n" #: gssapi.c:124 msgid "If you want to use GSSAPI, you need credentials first, possibly from kinit.\n" msgstr "Si quiere usar GSSAPI, necesita primero credenciales, posiblemente de kinit.\n" #: gssapi.c:160 #, c-format msgid "Received malformed challenge to \"%s GSSAPI\"!\n" msgstr "¡Se recibió un reto malformado para \"GSSAPI %s\"!\n" #: gssapi.c:170 msgid "Sending credentials\n" msgstr "Enviando credenciales\n" #: gssapi.c:201 msgid "Error exchanging credentials\n" msgstr "Error intercambiando credenciales\n" #: gssapi.c:243 msgid "Couldn't unwrap security level data\n" msgstr "No fue posible desenvolver los datos del nivel de seguridad\n" #: gssapi.c:248 msgid "Credential exchange complete\n" msgstr "Intercambio de credenciales completo\n" #: gssapi.c:252 msgid "Server requires integrity and/or privacy\n" msgstr "El servidor requiere integridad o privacidad\n" #: gssapi.c:261 #, c-format msgid "Unwrapped security level flags: %s%s%s\n" msgstr "Opciones de nivel de seguridad desenvueltas: %s%s%s\n" #: gssapi.c:265 #, c-format msgid "Maximum GSS token size is %ld\n" msgstr "El máximo tamaño del componente GSS es %ld\n" #: gssapi.c:274 msgid "GSSAPI username too long for static buffer.\n" msgstr "El nombre de usuario GSSAPI es demasiado grande para el almacenamiento estático.\n" #: gssapi.c:283 msgid "Error creating security level request\n" msgstr "Error creando petición de nivel de seguridad\n" #: gssapi.c:287 #, c-format msgid "GSSAPI send_token too large (%lu) while sending username.\n" msgstr "send_token de GSSAPI es demasiado grande (%lu) al enviar el nombre de usuario.\n" #: gssapi.c:298 msgid "Releasing GSS credentials\n" msgstr "Liberando las credenciales GSS\n" #: gssapi.c:302 msgid "Error releasing credentials\n" msgstr "Error liberando las credenciales\n" #: idle.c:61 #, c-format msgid "fetchmail: thread sleeping for %d sec.\n" msgstr "fetchmail: la tarea dormirá durante %d segundos\n" #: imap.c:91 msgid "Protocol identified as IMAP4 rev 1\n" msgstr "Protocolo identificado como IMAP4 rev 1\n" #: imap.c:95 msgid "Protocol identified as IMAP4 rev 0\n" msgstr "Protocolo identificado como IMAP4 rev 0\n" #: imap.c:99 msgid "Protocol identified as IMAP2 or IMAP2BIS\n" msgstr "Protocolo identificado como IMAP2 o IMAP2BIS\n" #: imap.c:111 msgid "will idle after poll\n" msgstr "descansará después de consultar\n" #: imap.c:138 #, c-format msgid "Received BYE response from IMAP server: %s\n" msgstr "Se recibió una respuesta BYE del servidor IMAP: %s\n" #: imap.c:160 #, c-format msgid "bogus message count in \"%s\"!" msgstr "¡cantidad de mensajes incorrecta en \"%s\"!" #: imap.c:207 #, c-format msgid "bogus EXPUNGE count in \"%s\"!" msgstr "¡cuenta de EXPUNGE incorrecta en \"%s\"!" #: imap.c:305 msgid "found updated capabilities list\n" msgstr "se encontró la lista de capacidades actualizada\n" #: imap.c:442 msgid "server did not advertise SASL-IR extension but fetchmail's implementation requires it for AUTHENTICATE EXTERNAL\n" msgstr "el servidor no anuncia la extensión SASL-IR pero la implementación de fetchmail la requiere para AUTHENTICATE EXTERNAL\n" #: imap.c:493 #, c-format msgid "%s: configuration requires TLS, but STARTTLS is not permitted because of authenticated state (PREAUTH). Aborting connection. If your plugin is secure, you can defeat STARTTLS with --sslproto '' (see manual).\n" msgstr "%s: la configuración requiere TLS, pero no se permite STARTTLS por el estado de autenticación (PREAUTH). Abortando la conexión. Si su plugin es seguro, puede derrotar a STARTTLS on --sslproto '' (vea el manual).\n" #: imap.c:496 #, c-format msgid "%s: configuration requires TLS, but STARTTLS is not permitted because of authenticated state (PREAUTH). Aborting connection. Server permitting, try --ssl instead (see manual).\n" msgstr "%s: la configuración requiere TLS, pero no se permite STARTTLS por el estado de autenticación (PREAUTH). Abortando la conexión. Si el servidor lo permite, pruebe en su lugar --ssl (vea el manual).\n" #: imap.c:516 pop3.c:447 #, c-format msgid "%s: upgrade to TLS succeeded.\n" msgstr "%s: actualización a TLS correcta.\n" #: imap.c:541 pop3.c:458 #, c-format msgid "%s: upgrade to TLS failed.\n" msgstr "%s: falló la actualización a TLS.\n" #: imap.c:546 #, c-format msgid "%s: opportunistic upgrade to TLS failed, trying to continue\n" msgstr "%s: falló la actualización oportunista a TLS, intentando continuar\n" #: imap.c:561 #, c-format msgid "%s: WARNING: server offered STARTTLS but sslproto '' given.\n" msgstr "%s: AVISO: el servidor ofreción STARTTLS pero se proporcionó sslproto ''.\n" #: imap.c:599 #, c-format msgid "%s: --auth external requested but server does not advertise it.\n" msgstr "%s: se solicitó --auth external pero el servidor no la anuncia.\n" #: imap.c:683 msgid "Required OTP capability not compiled into fetchmail\n" msgstr "La capacidad OTP requerida no se compiló en fetchmail\n" #: imap.c:703 pop3.c:580 msgid "Required NTLM capability not compiled into fetchmail\n" msgstr "La capacidad NTLM requerida no se compiló en fetchmail\n" #: imap.c:716 #, c-format msgid "%s: --auth password requested but server forbids it (LOGINDISABLED).\n" msgstr "%s: se solicitó una contraseña --auth pero el servidor lo prohibe (LOGINDISABLED).\n" #: imap.c:745 #, c-format msgid "%s: we've run out of authentication methods and cannot log in.\n" msgstr "%s: Hemos agotado los autenticadores permitidos y no puede continuar.\n" #: imap.c:769 #, c-format msgid "mail expunge mismatch (%d actual != %d expected)\n" msgstr "la eliminación de correo no coincide (%d actual != %d esperado)\n" #: imap.c:896 #, c-format msgid "%lu is unseen\n" msgstr "%lu no fue visto\n" #: imap.c:946 pop3.c:852 pop3.c:864 pop3.c:1109 pop3.c:1116 #, c-format msgid "%u is unseen\n" msgstr "%u no fue visto\n" #: imap.c:981 imap.c:1040 msgid "re-poll failed\n" msgstr "falló el reintento de consulta\n" #: imap.c:989 imap.c:1045 #, c-format msgid "%d message waiting after re-poll\n" msgid_plural "%d messages waiting after re-poll\n" msgstr[0] "Queda %d mensaje esperando tras reintentar la consulta\n" msgstr[1] "Quedan %d mensajes esperando tras reintentar la consulta\n" #: imap.c:1006 msgid "mailbox selection failed\n" msgstr "falló la selección de casilla\n" #: imap.c:1010 #, c-format msgid "%d message waiting after first poll\n" msgid_plural "%d messages waiting after first poll\n" msgstr[0] "Queda %d mensaje esperando tras la consulta inicial\n" msgstr[1] "Quedan %d mensajes esperando tras la consulta inicial\n" #: imap.c:1024 msgid "expunge failed\n" msgstr "falló la eliminación\n" #: imap.c:1028 #, c-format msgid "%d message waiting after expunge\n" msgid_plural "%d messages waiting after expunge\n" msgstr[0] "Queda %d mensaje esperando tras la eliminación\n" msgstr[1] "Quedan %d mensajes esperando tras la eliminación\n" #: imap.c:1067 msgid "search for unseen messages failed\n" msgstr "la búsqueda de mensajes no vistos falló\n" #: imap.c:1072 pop3.c:873 #, c-format msgid "%u is first unseen\n" msgstr "%u es el primero que no fue visto\n" #: imap.c:1156 msgid "Warning: ignoring bogus data for message sizes returned by the server.\n" msgstr "Aviso: ignorando datos de errores para los tamaños de mensaje devueltos por el servidor.\n" #: imap.c:1255 imap.c:1262 #, c-format msgid "Incorrect FETCH response: %s.\n" msgstr "Respuesta FETCH incorrecta: %s.\n" #: interface.c:256 msgid "Unable to open kvm interface. Make sure fetchmail is SGID kmem." msgstr "No es posible abrir la interfaz kvm. Asegúrese de que fetchmail este SGID kmem." #: interface.c:396 #, c-format msgid "Unable to parse interface name from %s" msgstr "Incapaz de interpretar el nombre de la interfaz a partir de %s" #: interface.c:418 msgid "get_ifinfo: sysctl (iflist estimate) failed" msgstr "get_ifinfo: sysctl (estimar lista de interfaces) falló" #: interface.c:424 msgid "get_ifinfo: malloc failed" msgstr "get_ifinfo: malloc falló" #: interface.c:430 msgid "get_ifinfo: sysctl (iflist) failed" msgstr "get_ifinfo: sysctl (lista de interfaces) falló" #: interface.c:448 #, c-format msgid "Routing message version %d not understood." msgstr "No se entendió la versión del mensaje de enrutado %d." #: interface.c:480 #, c-format msgid "No interface found with name %s" msgstr "No se encontró una interfaz con el nombre %s" #: interface.c:538 #, c-format msgid "No IP address found for %s" msgstr "No se encontró dirección IP para %s" #: interface.c:590 msgid "missing IP interface address\n" msgstr "falta la dirección IP de la interfaz\n" #: interface.c:606 msgid "invalid IP interface address\n" msgstr "la dirección IP de la interfaz no es válida\n" #: interface.c:612 msgid "invalid IP interface mask\n" msgstr "la máscara IP de la interfaz no es válida\n" #: interface.c:651 #, c-format msgid "activity on %s -noted- as %d\n" msgstr "actividad en %s -vista- como %d\n" #: interface.c:666 #, c-format msgid "skipping poll of %s, %s down\n" msgstr "omitiendo consulta %s, %s desactivada\n" #: interface.c:685 #, c-format msgid "skipping poll of %s, %s IP address excluded\n" msgstr "no se consulta %s, la dirección IP de %s se excluyó\n" #: interface.c:697 #, c-format msgid "activity on %s checked as %d\n" msgstr "actividad en %s verificada como %d\n" #: interface.c:723 #, c-format msgid "skipping poll of %s, %s inactive\n" msgstr "no se consulta %s, %s inactiva\n" #: interface.c:730 #, c-format msgid "activity on %s was %d, is %d\n" msgstr "la actividad en %s era %d, es %d\n" #: kerberos.c:74 msgid "could not decode initial BASE64 challenge\n" msgstr "no fue posible decodificar el desafío BASE64 inicial\n" #: kerberos.c:137 #, c-format msgid "principal %s in ticket does not match -u %s\n" msgstr "%s principal en el «ticket» no coincide con -u %s\n" #: kerberos.c:145 #, c-format msgid "non-null instance (%s) might cause strange behavior\n" msgstr "La instancia no nula (%s) puede causar un comportamiento extraño\n" #: kerberos.c:211 msgid "could not decode BASE64 ready response\n" msgstr "no fue posible decodificar la respuesta BASE64 «ready»\n" #: kerberos.c:218 msgid "challenge mismatch\n" msgstr "desafío no coincidente\n" #: lock.c:90 #, c-format msgid "fetchmail: error reading lockfile \"%s\": %s\n" msgstr "fetchmail: error leyendo el archivo de bloqueo «%s»: %s\n" #: lock.c:101 #, c-format msgid "fetchmail: removing stale lockfile \"%s\"\n" msgstr "fetchmail: eliminando archivo de bloqueo viejo \"%s\"\n" #: lock.c:105 #, c-format msgid "fetchmail: cannot unlink lockfile \"%s\" (%s), trying to write to it\n" msgstr "fetchmail: no se puede borrar el archivo de bloqueo \"%s\" (%s), tratando de escribir en él\n" #: lock.c:119 #, c-format msgid "fetchmail: cannot write to lockfile \"%s\" (%s), exiting\n" msgstr "fetchmail: no se puede escribir en el archivo de bloqueo «%s» (%s), terminando\n" #: lock.c:129 #, c-format msgid "fetchmail: error opening lockfile \"%s\": %s\n" msgstr "fetchmail: error abriendo archivo de bloqueo \"%s\": %s\n" #: lock.c:179 #, c-format msgid "fetchmail: lock creation failed, pidfile \"%s\": %s\n" msgstr "fetchmail: falló la creación del bloqueo, archivo pid \"%s\": %s\n" #: lock.c:190 #, c-format msgid "fetchmail: cannot remove or truncate pidfile \"%s\": %s\n" msgstr "fetchmail: no se puede borrar o truncar el archivo de pid «%s»: %s\n" #: netrc.c:225 #, c-format msgid "%s:%d: warning: found \"%s\" before any host names\n" msgstr "%s:%d: aviso: «%s» encontrado antes que cualquier nombre de anfitrión\n" #: netrc.c:263 #, c-format msgid "%s:%d: warning: unknown token \"%s\"\n" msgstr "%s:%d: aviso: el componente «%s» es desconocido\n" #: netrc.c:271 netrc.c:277 #, c-format msgid "%s: error reading file (%s).\n" msgstr "%s: error al leer el fichero (%s).\n" #: ntlmsubr.c:35 msgid "Warning: received malformed challenge to \"AUTH(ENTICATE) NTLM\"!\n" msgstr "Aviso: ¡Se recibió un reto malformado para \"AUTH(ENTICATE) NTLM\"!\n" #: ntlmsubr.c:84 msgid "NTLM challenge contains invalid data.\n" msgstr "El reto NTLM contiene datos inválidos.\n" #: odmr.c:67 #, c-format msgid "%s's SMTP listener does not support ATRN\n" msgstr "El SMTP de %s no permite ATRN\n" #: odmr.c:105 msgid "Turnaround now...\n" msgstr "Dese la vuelta ahora...\n" #: odmr.c:110 msgid "ATRN request refused.\n" msgstr "Petición ATRN rechazada.\n" #: odmr.c:114 msgid "Unable to process ATRN request now\n" msgstr "No es posible procesar el pedido ATRN\n" #: odmr.c:119 msgid "You have no mail.\n" msgstr "No tiene correo.\n" #: odmr.c:123 msgid "Command not implemented\n" msgstr "Orden no implementada\n" #: odmr.c:127 msgid "Authentication required.\n" msgstr "Autenticación requerida.\n" #: odmr.c:132 #, c-format msgid "Unknown ODMR error \"%s\"\n" msgstr "Error ODMR \"%s\" desconocido\n" #: odmr.c:192 msgid "receiving message data\n" msgstr "recibiendo datos del mensaje\n" #: odmr.c:247 msgid "Option --keep is not supported with ODMR\n" msgstr "La opción --keep no se permite con ODMR\n" #: odmr.c:251 msgid "Option --flush is not supported with ODMR\n" msgstr "La opción --flush no se permite con ODMR\n" #: odmr.c:255 msgid "Option --folder is not supported with ODMR\n" msgstr "La opción --folder no se permite con ODMR\n" #: odmr.c:259 msgid "Option --check is not supported with ODMR\n" msgstr "La opción --check no se permite con ODMR\n" #: opie.c:43 msgid "server recv fatal\n" msgstr "fatal recv del servidor\n" #: opie.c:57 msgid "Could not decode OTP challenge\n" msgstr "No fue posible decodificar el desafío OTP\n" #: opie.c:65 pop3.c:608 msgid "Secret pass phrase: " msgstr "Frase clave secreta: " #: options.c:179 options.c:223 #, c-format msgid "String '%s' is not a valid number string.\n" msgstr "La cadena «%s» no es un cadena de números válida.\n" #: options.c:188 #, c-format msgid "Value of string '%s' is %s than %d.\n" msgstr "El valor de la cadena «%s» es %s que %d.\n" #: options.c:189 msgid "smaller" msgstr "menor" #: options.c:189 msgid "larger" msgstr "mayor" #: options.c:337 #, c-format msgid "Invalid bad-header policy `%s' specified.\n" msgstr "Se especificó la política bad-header «%s» inválida.\n" #: options.c:378 #, c-format msgid "Invalid protocol `%s' specified.\n" msgstr "Se especificó el protocolo «%s» inválido.\n" #: options.c:425 #, c-format msgid "Invalid authentication `%s' specified.\n" msgstr "Se especificó la autenticación «%s» inválida.\n" #: options.c:641 msgid "usage: fetchmail [options] [server ...]\n" msgstr "uso: fetchmail [opciones] [servidor ...]\n" #: options.c:642 msgid " Options are as follows:\n" msgstr " Las opciones son las siguientes:\n" #: options.c:643 msgid " -?, --help display this option help\n" msgstr " -?, --help muestra esta ayuda\n" #: options.c:644 msgid " -V, --version display version info\n" msgstr " -V, --version muestra información sobre la versión\n" #: options.c:646 msgid " -c, --check check for messages without fetching\n" msgstr " -c, --check verifica si hay mensajes sin recibir\n" #: options.c:647 msgid " -s, --silent work silently\n" msgstr " -s, --silent trabajar silenciosamente\n" #: options.c:648 msgid " -v, --verbose work noisily (diagnostic output)\n" msgstr " -v, --verbose trabajar ruidosamente (información de diagnóstico)\n" #: options.c:649 msgid " -d, --daemon run as a daemon once per n seconds\n" msgstr " -d, --daemon correr en segundo plano y activarse una vez cada n segundos\n" #: options.c:650 msgid " -N, --nodetach don't detach daemon process\n" msgstr " -N, --nodetach no lanzar un proceso en segundo plano\n" #: options.c:651 msgid " -q, --quit kill daemon process\n" msgstr " -q, --quit terminar el proceso en segundo plano\n" #: options.c:652 msgid " -L, --logfile specify logfile name\n" msgstr " -L, --logfile especificar el nombre del archivo de registro\n" #: options.c:653 msgid " --syslog use syslog(3) for most messages when running as a daemon\n" msgstr " --syslog usar syslog(3) para la mayoría de los mensajes cuando se ejecuta en segundo plano\n" #: options.c:654 msgid " --nosyslog turns off use of syslog(3)\n" msgstr " --nosyslog desactivar el uso de syslog(3)\n" #: options.c:655 msgid " --invisible don't write Received & enable host spoofing\n" msgstr " --invisible no escribir «Received» y activar falsificación del anfitrión\n" #: options.c:656 msgid " -f, --fetchmailrc specify alternate run control file\n" msgstr " -f, --fetchmailrc especificar archivo de control de ejecución alterno\n" #: options.c:657 msgid " -i, --idfile specify alternate UIDs file\n" msgstr " -i, --idfile especificar archivo de UID alterno\n" #: options.c:658 msgid " --pidfile specify alternate PID (lock) file\n" msgstr " --pidfile especificar archivo PID alternativo (bloqueado)\n" #: options.c:659 msgid " --postmaster specify recipient of last resort\n" msgstr " --postmaster especificar el recipiente de último recurso\n" #: options.c:660 msgid " --nobounce redirect bounces from user to postmaster.\n" msgstr " --nobounce redirigir rebotes del usuario al postmaster.\n" #: options.c:661 msgid " --nosoftbounce fetchmail deletes permanently undeliverable messages.\n" msgstr " --nosoftbounce fetchmail borra permanentemente los mensajes que no se pueden entregar.\n" #: options.c:662 msgid " --softbounce keep permanently undeliverable messages on server (default).\n" msgstr " --softbounce mantiene permanentemente los mensajes que no se pueden entregar en el servidor (predeterminado).\n" #: options.c:664 msgid " -I, --interface interface required specification\n" msgstr " -I, --interface especificación de interfaz requerida\n" #: options.c:665 msgid " -M, --monitor monitor interface for activity\n" msgstr " -M, --monitor monitorizar interfaz por actividad\n" #: options.c:668 msgid " --ssl enable ssl encrypted session\n" msgstr " --ssl activar sesión cifrada con ssl\n" #: options.c:669 msgid " --sslkey ssl private key file\n" msgstr " --sslkey archivo de clave privada ssl\n" #: options.c:670 msgid " --sslcert ssl client certificate\n" msgstr " --sslcert certificado ssl del cliente\n" #: options.c:671 msgid " --sslcertck do strict server certificate check (recommended)\n" msgstr " --sslcert comprobación estricta del certificado del servidor (recomendado)\n" #: options.c:672 msgid " --nosslcertck skip strict server certificate check (insecure)\n" msgstr " --nosslcertck salta la comprobación estricta del certificado del servidor (inseguro)\n" #: options.c:673 msgid " --sslcertfile path to trusted-CA ssl certificate file\n" msgstr " --sslcertfile ubicación del fichero de certificados ssl confiables\n" #: options.c:674 msgid " --sslcertpath path to trusted-CA ssl certificate directory\n" msgstr " --sslcertpath ubicación del directorio de los certificados ssl confiables\n" #: options.c:675 msgid " --sslcommonname expect this CommonName from server (discouraged)\n" msgstr " --sslcommonname esperar este «CommonName» del servidor (desaconsejado)\n" #: options.c:676 msgid " --sslfingerprint fingerprint that must match that of the server's cert.\n" msgstr " --sslfingerprint huella digital que debe coincidir con la del certificado del servidor.\n" #: options.c:677 msgid " --sslproto force ssl protocol (see manual)\n" msgstr " --sslproto forzar protocolo (consulte el manual)\n" #: options.c:679 msgid " --plugin specify external command to open connection\n" msgstr " --plugin especificar la orden externa para abrir una conexión\n" #: options.c:680 msgid " --plugout specify external command to open smtp connection\n" msgstr " --plugout especificar la orden externa para abrir una conexión smtp\n" #: options.c:681 msgid "" " --bad-header {reject|accept}\n" " specify policy for handling messages with bad headers\n" msgstr "" " --bad-header {reject|accept}\n" " especificar la política para manejar mensajes con encabezados erróneos\n" #: options.c:684 msgid " -p, --proto[col] specify retrieval protocol (see man page)\n" msgstr " -p, --proto[col] especificar el protocolo de recepción (ver página man)\n" #: options.c:685 msgid " -U, --uidl force the use of UIDLs (pop3 only)\n" msgstr " -U, --uidl forzar el uso de UIDL (sólo pop3)\n" #: options.c:686 msgid " --idle tells the IMAP server to send notice of new messages\n" msgstr " --idle indicar al servidor IMAP que envíe notificaciones de mensajes nuevos\n" #: options.c:687 msgid " --port TCP port to connect to (obsolete, use --service)\n" msgstr " --port Puerto TCP a conectar (obsoleto, use --service)\n" #: options.c:688 msgid " -P, --service TCP service to connect to (can be numeric TCP port)\n" msgstr " -P, --service Servicio TCP al que conectarse (puede ser un puerto TCP numérico)\n" #: options.c:689 msgid " --auth authentication type (see manual)\n" msgstr " --auth tipo de autenticación (consulte el manual)\n" #: options.c:690 msgid " -t, --timeout server nonresponse timeout\n" msgstr " -t, --timeout tiempo de espera por respuesta del servidor\n" #: options.c:691 msgid " -E, --envelope envelope address header\n" msgstr " -E, --envelope envolver encabezados de dirección\n" #: options.c:692 msgid " -Q, --qvirtual prefix to remove from local user id\n" msgstr " -Q, --qvirtual prefijo a eliminar de la identificación local del usuario\n" #: options.c:693 msgid " --principal mail service principal\n" msgstr " --principal principal del servicio de correo\n" #: options.c:694 msgid " --tracepolls add poll-tracing information to Received header\n" msgstr " --tracepolls añadir información sobre traceado de consultas al encabezado «Received»\n" #: options.c:696 msgid " -u, --user[name] specify users's login on server\n" msgstr " -u, --user[name] especificar el acceso del usuario en el servidor\n" #: options.c:697 msgid " -a, --[fetch]all retrieve old and new messages\n" msgstr " -a, --[fetch]all recuperar antiguos y nuevos mensajes\n" #: options.c:698 msgid " -K, --nokeep delete new messages after retrieval\n" msgstr " -K, --nokeep borrar nuevos mensajes después de recibidos\n" #: options.c:699 msgid " -k, --keep save new messages after retrieval\n" msgstr " -k, --keep guardar nuevos mensajes después de recibidos\n" #: options.c:700 msgid " -F, --flush delete old messages from server\n" msgstr " -F, --flush borrar viejos mensajes del servidor\n" #: options.c:701 msgid " --limitflush delete oversized messages\n" msgstr " --limitflush borrar mensajes demasiado grandes\n" #: options.c:702 msgid " -n, --norewrite don't rewrite header addresses\n" msgstr " -n, --norewrite no reescribir las direcciones del encabezado\n" #: options.c:703 msgid " -l, --limit don't fetch messages over given size\n" msgstr " -l, --limit no recibir mensajes más grandes de lo especificado\n" #: options.c:704 msgid " -w, --warnings interval between warning mail notification\n" msgstr " -w, --warnings intervalo entre las notificaciones de correo\n" #: options.c:706 msgid " -S, --smtphost set SMTP forwarding host\n" msgstr " -S, --smtphost configurar el anfitrión de reenvío de SMTP\n" #: options.c:707 msgid " --fetchdomains fetch mail for specified domains\n" msgstr " --fetchdomains recibir correo para los dominios especificados\n" #: options.c:708 msgid " -D, --smtpaddress set SMTP delivery domain to use\n" msgstr " -D, --smtpaddress configurar el dominio de entrega de SMTP a usar\n" #: options.c:709 msgid " --smtpname set SMTP full name username@domain\n" msgstr " --smtpname usar nombreusuario@dominio como nombre completo para SMTP\n" #: options.c:710 msgid " -Z, --antispam, set antispam response values\n" msgstr " -Z, --antispam configurar los valores de respuesta anti basura\n" #: options.c:711 msgid " -b, --batchlimit set batch limit for SMTP connections\n" msgstr " -b, --batchlimit configurar el límite de mensajes para las conexiones SMTP\n" #: options.c:712 msgid " -B, --fetchlimit set fetch limit for server connections\n" msgstr " -B, --fetchlimit configurar el límite de mensajes para las conexiones al servidor\n" #: options.c:713 msgid " --fetchsizelimit set fetch message size limit\n" msgstr " --fetchsizelimit configurar el límite de tamaño de mensaje\n" #: options.c:714 msgid " --fastuidl do a binary search for UIDLs\n" msgstr " --fastuidl utilizar búsqueda binaria para los UIDL\n" #: options.c:715 msgid " -e, --expunge set max deletions between expunges\n" msgstr " -e, --expunge configurar la cantidad de mensajes borrados entre eliminaciones\n" #: options.c:716 msgid " -m, --mda set MDA to use for forwarding\n" msgstr " -m, --mda configurar el MDA para que reenvíe\n" #: options.c:717 msgid " --bsmtp set output BSMTP file\n" msgstr " --bsmtp configurar archivo de salida de BSMTP\n" #: options.c:718 msgid " --lmtp use LMTP (RFC2033) for delivery\n" msgstr " --lmtp usar LMTP (RFC2033) para entrega\n" #: options.c:719 msgid " -r, --folder specify remote folder name\n" msgstr " -r, --folder especificar nombre de la carpeta remota\n" #: options.c:720 msgid " --showdots show progress dots even in logfiles\n" msgstr " --showdots mostrar puntos de progreso incluso en los archivos de registro\n" #: pop2.c:67 msgid "POP2 does not support STLS. Giving up.\n" msgstr "POP2 no soporta STLS. Me rindo.\n" #: pop2.c:73 msgid "POP2 only supports password authentication. Giving up.\n" msgstr "POP2 solamente soporta autenticación con contraseña. Me rindo.\n" #: pop3.c:338 msgid "Warning: \"Maillennium POP3\" found, using RETR command instead of TOP.\n" msgstr "Aviso: «Servidor Maillennium POP3/PROXY» encontrado, se usa la orden RETR en vez de TOP.\n" #: pop3.c:392 msgid "STLS is mandatory for this session, but server refused CAPA command.\n" msgstr "STLS es obligatorio para esta sesión, pero el servidor rechaza la orden CAPA\n" #: pop3.c:393 msgid "CAPA command support is, however, necessary for STLS.\n" msgstr "El soporte para la orden CAPA, no obstante, es necesaria para STLS.\n" #: pop3.c:470 #, c-format msgid "%s: opportunistic upgrade to TLS failed, trying to continue.\n" msgstr "%s: la actualización oportunista a TLS falló, intentando continuar.\n" #: pop3.c:476 #, c-format msgid "%s: WARNING: server offered STLS, but sslproto '' given.\n" msgstr "%s: AVISO: el servidor ofreció STLS, pero se proporcionó sslproto ''.\n" #: pop3.c:644 msgid "We've run out of allowed authenticators and cannot continue.\n" msgstr "Hemos agotado los autenticadores permitidos y no puede continuar.\n" #: pop3.c:658 msgid "Required APOP timestamp not found in greeting\n" msgstr "El sello de tiempo APOP requerido no se ha encontrada en el saludo\n" #: pop3.c:667 msgid "Timestamp syntax error in greeting\n" msgstr "Error de sintaxis en el sello de tiempo en el saludo\n" #: pop3.c:683 msgid "Invalid APOP timestamp.\n" msgstr "Sello de tiempo APOP inválido.\n" #: pop3.c:707 msgid "Undefined protocol request in POP3_auth\n" msgstr "Petición de protocolo indefinido en POP3_auth\n" #: pop3.c:728 msgid "lock busy! Is another session active?\n" msgstr "¡bloqueo ocupado! ¿Hay otra sesión activa?\n" #: pop3.c:791 msgid "Cannot handle UIDL response from upstream server.\n" msgstr "No se puede manejar la respuesta UIDL proveniente del servidor.\n" #: pop3.c:814 msgid "Server responded with UID for wrong message.\n" msgstr "El servidor devolvió el UID de un mensaje incorrecto.\n" #: pop3.c:843 #, c-format msgid "id=%s (num=%u) was deleted, but is still present!\n" msgstr "id=%s (num=%u) fue borrado, ¡pero aún se encuentra presente!\n" #: pop3.c:955 msgid "Messages inserted into list on server. Cannot handle this.\n" msgstr "Mensajes insertados en una lista en el servidor. No se puede manejar esto.\n" #: pop3.c:1053 msgid "protocol error\n" msgstr "error de protocolo\n" #: pop3.c:1069 msgid "protocol error while fetching UIDLs\n" msgstr "error de protocolo durante la recepción de UIDL\n" #: pop3.c:1100 #, c-format msgid "id=%s (num=%d) was deleted, but is still present!\n" msgstr "id=%s (num=%d) fue borrado, ¡pero aún se encuentra presente!\n" #: pop3.c:1412 msgid "Option --folder is not supported with POP3\n" msgstr "La opción --folder no está permitida con POP3\n" #: rcfile_y.y:130 msgid "server option after user options" msgstr "opciones de servidor tras opciones de usuario" #: rcfile_y.y:173 msgid "SDPS not enabled." msgstr "SDPS no activado." #: rcfile_y.y:217 msgid "fetchmail: interface option is only supported under Linux (without IPv6) and FreeBSD\n" msgstr "fetchmail: la opción «interface» solo está permitida bajo Linux (sin IPv6) y FreeBSD\n" #: rcfile_y.y:225 msgid "fetchmail: monitor option is only supported under Linux (without IPv6) and FreeBSD\n" msgstr "fetchmail: la opción «monitor» sólo está permitida bajo Linux (sin IPv6) y FreeBSD\n" #: rcfile_y.y:339 msgid "SSL is not enabled" msgstr "SSL no está activado" #: rcfile_y.y:391 msgid "end of input" msgstr "fin de entrada" #: rcfile_y.y:429 #, c-format msgid "File %s must be a regular file.\n" msgstr "El archivo %s debe ser de tipo normal.\n" #: rcfile_y.y:439 #, c-format msgid "File %s must have no more than -rwx------ (0700) permissions.\n" msgstr "El archivo %s no debe tener más que los permisos -rwx------ (0700).\n" #: rcfile_y.y:451 #, c-format msgid "File %s must be owned by you.\n" msgstr "Usted debe ser el propietario del archivo %s.\n" #: report.c:69 msgid "Unknown system error" msgstr "Error de sistema desconocido" #: report.c:94 #, c-format msgid "%s (log message incomplete)\n" msgstr "%s (mensaje de registro incompleto)\n" #: rfc822.c:83 #, c-format msgid "About to rewrite %s...\n" msgstr "A punto de reescribir %s...\n" #: rfc822.c:221 #, c-format msgid "...rewritten version is %s.\n" msgstr "...La versión reescrita es %s.\n" #: rpa.c:118 msgid "Success" msgstr "Éxito" #: rpa.c:119 msgid "Restricted user (something wrong with account)" msgstr "Usuario restringido (hay un problema con la cuenta)" #: rpa.c:120 msgid "Invalid userid or passphrase" msgstr "Nombre de usuario o contraseña inválidos" #: rpa.c:121 msgid "Deity error" msgstr "Error en deidad" #: rpa.c:174 msgid "RPA token 2: Base64 decode error\n" msgstr "Componente RPA 2: error de decodificación Base64\n" #: rpa.c:185 #, c-format msgid "Service chose RPA version %d.%d\n" msgstr "El servicio eligió RPA versión %d.%d\n" #: rpa.c:191 #, c-format msgid "Service challenge (l=%d):\n" msgstr "Desafío del servicio (l=%d):\n" #: rpa.c:200 #, c-format msgid "Service timestamp %s\n" msgstr "Sello de tiempo del servicio %s\n" #: rpa.c:205 msgid "RPA token 2 length error\n" msgstr "Error de longitud en el componente RPA 2\n" #: rpa.c:209 #, c-format msgid "Realm list: %s\n" msgstr "Lista de reinos: %s\n" #: rpa.c:213 msgid "RPA error in service@realm string\n" msgstr "Error de RPA en la cadena servicio@reino\n" #: rpa.c:250 msgid "RPA token 4: Base64 decode error\n" msgstr "Componente RPA 4: error de decodificación\n" #: rpa.c:261 #, c-format msgid "User authentication (l=%d):\n" msgstr "Autenticación de usuario (l=%d):\n" #: rpa.c:275 #, c-format msgid "RPA status: %02X\n" msgstr "Estado RPA: %02X\n" #: rpa.c:281 msgid "RPA token 4 length error\n" msgstr "Error de longitud en el componente RPA 4\n" #: rpa.c:288 #, c-format msgid "RPA rejects you: %s\n" msgstr "RPA lo rechaza: %s\n" #: rpa.c:290 msgid "RPA rejects you, reason unknown\n" msgstr "RPA lo rechaza, razón desconocida\n" #: rpa.c:298 #, c-format msgid "RPA User Authentication length error: %d\n" msgstr "Error de longitud en la autenticación de usuario RPA: %d\n" #: rpa.c:303 #, c-format msgid "RPA Session key length error: %d\n" msgstr "Error de longitud en la clave de sesión RPA: %d\n" #: rpa.c:309 msgid "RPA _service_ auth fail. Spoof server?\n" msgstr "Fallo en la autenticación del _servicio_ RPA. ¿Servidor falso?\n" #: rpa.c:314 msgid "Session key established:\n" msgstr "Clave de sesión establecida:\n" #: rpa.c:345 msgid "RPA authorisation complete\n" msgstr "Autorización RPA completa\n" #: rpa.c:372 msgid "Get response\n" msgstr "Obtener respuesta\n" #: rpa.c:402 #, c-format msgid "Get response return %d [%s]\n" msgstr "Obtener respuesta %d [%s]\n" #: rpa.c:463 msgid "Hdr not 60\n" msgstr "Encabezado no es 60\n" #: rpa.c:484 msgid "Token length error\n" msgstr "Error de longitud en el componente\n" #: rpa.c:489 #, c-format msgid "Token Length %d disagrees with rxlen %d\n" msgstr "La longitud %d del componente no está de acuerdo con rxlen %d\n" #: rpa.c:495 msgid "Mechanism field incorrect\n" msgstr "Campo del mecanismo incorrecto\n" #: rpa.c:531 #, c-format msgid "dec64 error at char %d: %x\n" msgstr "Error de dec64 en el carácter %d: %x\n" #: rpa.c:546 msgid "Inbound binary data:\n" msgstr "Datos binarios entrantes:\n" #: rpa.c:582 msgid "Outbound data:\n" msgstr "Datos salientes:\n" #: rpa.c:645 msgid "RPA String too long\n" msgstr "Cadena RPA muy larga\n" #: rpa.c:650 msgid "Unicode:\n" msgstr "Unicode:\n" #: rpa.c:709 msgid "RPA Failed open of /dev/urandom. This shouldn't\n" msgstr "RPA falló abriendo /dev/urandom. Esto no debería\n" #: rpa.c:710 msgid " prevent you logging in, but means you\n" msgstr " prevenir su ingreso, pero significa que\n" #: rpa.c:711 msgid " cannot be sure you are talking to the\n" msgstr " no se puede estar seguro de estar hablando\n" #: rpa.c:712 msgid " service that you think you are (replay\n" msgstr " al servicio que usted cree (son posibles\n" #: rpa.c:713 msgid " attacks by a dishonest service are possible.)\n" msgstr " ataques de respuesta por un servicio deshonesto).\n" #: rpa.c:724 msgid "User challenge:\n" msgstr "Desafío de usuario:\n" #: rpa.c:874 msgid "MD5 being applied to data block:\n" msgstr "Aplicando MD5 al bloque de datos:\n" #: rpa.c:887 msgid "MD5 result is:\n" msgstr "El resultado de MD5 es:\n" #: servport.c:53 #, c-format msgid "getaddrinfo(NULL, \"%s\") error: %s\n" msgstr "getaddrinfo(NULL, «%s») error: %s\n" #: servport.c:80 #, c-format msgid "Cannot resolve service %s to port number.\n" msgstr "No se puede resolver el servicio %s al número de puerto.\n" #: servport.c:81 msgid "Please specify the service as decimal port number.\n" msgstr "Especifique el servicio como un número de puerto decimal.\n" #: sink.c:231 #, c-format msgid "forwarding to %s\n" msgstr "reenviando a %s\n" #: sink.c:319 msgid "SMTP: (bounce-message body)\n" msgstr "SMTP: (cuerpo de mensaje de rebote)\n" #: sink.c:322 #, c-format msgid "mail from %s bounced to %s\n" msgstr "correo de %s rebotado a %s\n" #: sink.c:497 sink.c:590 #, c-format msgid "%cMTP error: %s\n" msgstr "Error de %cMTP: %s\n" #: sink.c:535 msgid "SMTP server requires STARTTLS, keeping message.\n" msgstr "El servidor SMTP necesita STARTTLS, manteniendo mensaje.\n" #: sink.c:714 #, c-format msgid "BSMTP file open failed: %s\n" msgstr "Fallo en la apertura del archivo de BSMTP: %s\n" #: sink.c:760 #, c-format msgid "BSMTP preamble write failed: %s.\n" msgstr "Fallo en la escritura del preámbulo BSMTP: %s.\n" #: sink.c:974 #, c-format msgid "%cMTP listener doesn't like recipient address `%s'\n" msgstr "Al servidor %cMTP no le gusta la dirección de recipiente «%s»\n" #: sink.c:981 #, c-format msgid "%cMTP listener doesn't really like recipient address `%s'\n" msgstr "Al servidor %cMTP realmente no le gusta la dirección de recipiente «%s»\n" #: sink.c:1027 msgid "no address matches; no postmaster set.\n" msgstr "no hay direcciones coincidentes; no se configuró un postmaster.\n" #: sink.c:1039 #, c-format msgid "can't even send to %s!\n" msgstr "¡ni siquiera es posible enviar a %s!\n" #: sink.c:1045 #, c-format msgid "no address matches; forwarding to %s.\n" msgstr "no hay direcciones coincidentes; reenviando a %s.\n" #: sink.c:1167 #, c-format msgid "MDA option contains single-quoted %%%c expansion.\n" msgstr "la opción MDA contiene una expansión %%%c con comillas sencillas.\n" #: sink.c:1168 msgid "Refusing to deliver. Check the manual and fix your mda option.\n" msgstr "No se puede entregar. Revise el manual y verifique su opción mda.\n" #: sink.c:1211 #, c-format msgid "about to deliver with: %s\n" msgstr "a punto de entregar con: %s\n" #: sink.c:1222 #, c-format msgid "Cannot switch effective user id to %ld: %s\n" msgstr "No se puede cambiar el id del usuario efectivo a %ld: %s\n" #: sink.c:1234 #, c-format msgid "Cannot switch effective user id back to original %ld: %s\n" msgstr "No se puede cambiar el id del usuario efectivo al %ld original: %s\n" #: sink.c:1241 msgid "MDA open failed\n" msgstr "Fallo en la apertura de MDA\n" #: sink.c:1280 #, c-format msgid "%cMTP connect to %s failed\n" msgstr "Fallo en la conexión de %cMTP a %s\n" #: sink.c:1304 #, c-format msgid "can't raise the listener; falling back to %s" msgstr "no se puede despertar al servidor; recurriendo a %s" #: sink.c:1362 #, c-format msgid "Message termination or close of BSMTP file failed: %s\n" msgstr "Falló la terminación del mensaje o el cerrado del fichero BSMTP: %s\n" #: sink.c:1387 #, c-format msgid "Error writing to MDA: %s\n" msgstr "Error escribiendo a MDA: %s\n" #: sink.c:1390 #, c-format msgid "MDA died of signal %d\n" msgstr "MDA murió por la señal %d\n" #: sink.c:1393 #, c-format msgid "MDA returned nonzero status %d\n" msgstr "MDA devolvió un estado %d distinto de cero\n" #: sink.c:1396 #, c-format msgid "Strange: MDA pclose returned %d and errno %d/%s, cannot handle at %s:%d\n" msgstr "Extraño: MDA pclose devolvió %d y errno %d/%s, no se puede manejar en %s:%d\n" #: sink.c:1421 msgid "SMTP listener refused delivery\n" msgstr "El servidor SMTP rechazó la entrega\n" #: sink.c:1451 msgid "LMTP delivery error on EOM\n" msgstr "Error de entrega de LMTP en EOM\n" #: sink.c:1454 #, c-format msgid "Unexpected non-503 response to LMTP EOM: %s\n" msgstr "Respuesta diferente a 503 no esperada a LMTP EOM: %s\n" #: sink.c:1620 msgid "The Fetchmail Daemon" msgstr "El demonio de Fetchmail" #: smtp.c:84 msgid "ESMTP CRAM-MD5 Authentication...\n" msgstr "Autenticación ESMTP CRAM-MD5...\n" #: smtp.c:90 smtp.c:143 msgid "Server rejected the AUTH command.\n" msgstr "El servidor rechazó la orden AUTH.\n" #: smtp.c:98 smtp.c:150 smtp.c:159 smtp.c:165 msgid "Bad base64 reply from server.\n" msgstr "Mala respuesta base64 del servidor.\n" #: smtp.c:102 #, c-format msgid "Challenge decoded: %s\n" msgstr "Desafío decodificado: %s\n" #: smtp.c:119 msgid "ESMTP PLAIN Authentication...\n" msgstr "Autenticación ESMTP PLAIN...\n" #: smtp.c:137 msgid "ESMTP LOGIN Authentication...\n" msgstr "Autenticación ESMTP LOGIN...\n" #: smtp.c:354 smtp.c:382 msgid "smtp listener protocol error\n" msgstr "error de protocolo en el servidor smtp\n" #: socket.c:149 msgid "fetchmail: malloc failed\n" msgstr "fetchmail: malloc falló\n" #: socket.c:183 #, c-format msgid "fetchmail: plugin for host %s service %s is empty, cannot run!\n" msgstr "fetchmail: plugin para el anfitrión %s servicio %s está vacío. ¡No se puede ejecutar!\n" #: socket.c:188 msgid "fetchmail: socketpair failed\n" msgstr "fetchmail: par de sockets falló\n" #: socket.c:196 msgid "fetchmail: fork failed\n" msgstr "fetchmail: falló la bifurcación\n" #: socket.c:203 msgid "dup2 failed\n" msgstr "dup2 falló\n" #: socket.c:209 #, c-format msgid "running %s (host %s service %s)\n" msgstr "ejecutando %s (anfitrión %s servicio %s)\n" #: socket.c:211 #, c-format msgid "execvp(%s) failed\n" msgstr "execvp(%s) falló\n" #: socket.c:286 #, c-format msgid "getaddrinfo(\"%s\",\"%s\") error: %s\n" msgstr "getaddrinfo(«%s»,«%s») error: %s\n" #: socket.c:289 msgid "Try adding the --service option (see also FAQ item R12).\n" msgstr "Intentando añadir la opción --service (vea también FAQ elemento R12).\n" #: socket.c:303 socket.c:306 #, c-format msgid "unknown (%s)" msgstr "desconocido (%s)" #: socket.c:309 #, c-format msgid "Trying to connect to %s/%s..." msgstr "Intentando conectar a %s/%s..." #: socket.c:318 #, c-format msgid "cannot create socket: %s\n" msgstr "no se puede crear el zócalo %s\n" #: socket.c:320 #, c-format msgid "name %d: cannot create socket family %d type %d: %s\n" msgstr "nombre %d: no se puede crear el zócalo familia %d tipo %d: %s\n" #: socket.c:338 msgid "connection failed.\n" msgstr "Fallo en la conexión.\n" #: socket.c:339 #, c-format msgid "connection to %s:%s [%s/%s] failed: %s.\n" msgstr "conexión a %s:%s [%s/%s] fallida: %s.\n" #: socket.c:341 #, c-format msgid "name %d: connection to %s:%s [%s/%s] failed: %s.\n" msgstr "nombre %d: conexión a %s:%s [%s/%s] fallida: %s.\n" #: socket.c:347 msgid "connected.\n" msgstr "conectado.\n" #: socket.c:360 #, c-format msgid "" "Connection errors for this poll:\n" "%s" msgstr "" "Errores de conexión para esta consulta:\n" "%s" #: socket.c:447 #, c-format msgid "OpenSSL reported: %s\n" msgstr "OpenSSL reportado: %s\n" #: socket.c:687 #, c-format msgid "SSL verify callback depth %d: verify_ok == %d, err = %d, %s\n" msgstr "Llamada de verificación SSL nivel %d: verify_ok == %d, err %d, %s\n" #: socket.c:693 msgid "Server certificate:\n" msgstr "Certificado del servidor\n" #: socket.c:698 #, c-format msgid "Certificate chain, from root to peer, starting at depth %d:\n" msgstr "Cadena de certificados, desde la raíz hasta el asociado, iniciando en el nivel %d\n" #: socket.c:701 #, c-format msgid "Certificate at depth %d:\n" msgstr "Certificado en el nivel %d:\n" #: socket.c:707 #, c-format msgid "Issuer Organization: %s\n" msgstr "Organización emisora: %s\n" #: socket.c:710 msgid "Warning: Issuer Organization Name too long (possibly truncated).\n" msgstr "Aviso: el nombre de la organización emisora es muy largo (posiblemente truncado).\n" #: socket.c:712 msgid "Unknown Organization\n" msgstr "Organización desconocida\n" #: socket.c:714 #, c-format msgid "Issuer CommonName: %s\n" msgstr "«CommonName» del emisor: %s\n" #: socket.c:717 msgid "Warning: Issuer CommonName too long (possibly truncated).\n" msgstr "Aviso: el «CommonName» del emisor es muy largo (posiblemente truncado).\n" #: socket.c:719 msgid "Unknown Issuer CommonName\n" msgstr "«CommonName» del emisor desconocido\n" #: socket.c:725 #, c-format msgid "Subject CommonName: %s\n" msgstr "«CommonName» del sujeto: %s\n" #: socket.c:731 msgid "Bad certificate: Subject CommonName too long!\n" msgstr "Certificado incorrecto: el «CommonName» del asunto es muy largo.\n" #: socket.c:737 msgid "Bad certificate: Subject CommonName contains NUL, aborting!\n" msgstr "Certificado incorrecto: el «CommonName» del asunto contiene NUL, abortando.\n" #: socket.c:765 #, c-format msgid "Subject Alternative Name: %s\n" msgstr "Nombre alternativo del asunto: %s\n" #: socket.c:771 msgid "Bad certificate: Subject Alternative Name contains NUL, aborting!\n" msgstr "Certificado incorrecto: El nombre alternativo del asunto contiene NUL, abortando.\n" #: socket.c:788 #, c-format msgid "Server CommonName mismatch: %s != %s\n" msgstr "«CommonName» del servidor no coincide: %s = %s\n" #: socket.c:795 msgid "Server name not set, could not verify certificate!\n" msgstr "El nombre de servidor no fue configurado, ¡no fue posible verificar el certificado!\n" #: socket.c:800 msgid "Unknown Server CommonName\n" msgstr "«CommonName» del servidor desconocido\n" #: socket.c:802 msgid "Server name not specified in certificate!\n" msgstr "¡No se especifica el nombre del servidor en el certificado!\n" #: socket.c:814 msgid "EVP_md5() failed!\n" msgstr "EVP_md5() falló\n" #: socket.c:818 msgid "Out of memory!\n" msgstr "¡No hay memoria!\n" #: socket.c:826 msgid "Digest text buffer too small!\n" msgstr "¡El espacio para el resumen de texto es muy pequeño!\n" #: socket.c:832 #, c-format msgid "%s key fingerprint: %s\n" msgstr "Huella digital de la clave %s: %s\n" #: socket.c:836 #, c-format msgid "%s fingerprints match.\n" msgstr "Las huellas digitales de %s coinciden.\n" #: socket.c:838 #, c-format msgid "%s fingerprints do not match!\n" msgstr "¡Las huellas digitales de %s no coinciden!\n" #: socket.c:850 #, c-format msgid "Server certificate verification error: %s\n" msgstr "Falló la verificación del certificado del servidor: %s\n" #: socket.c:865 #, c-format msgid "Broken certification chain at: %s\n" msgstr "Cadena de certificación rota en: %s\n" #: socket.c:867 msgid "This could mean that the server did not provide the intermediate CA's certificate(s), which is nothing fetchmail could do anything about. For details, please see the README.SSL-SERVER document that ships with fetchmail.\n" msgstr "Esto puede significar que el servidor no proporcionó los certificados intermedios confiables, y fetchmail no puede hacer nada al respecto. Para más detalles, por favor consulte el documento README.SSL-SERVER que viene con fetchmail.\n" #: socket.c:877 #, c-format msgid "Missing trust anchor certificate: %s\n" msgstr "Falta el certificado ancla de confianza: %s\n" #: socket.c:880 msgid "This could mean that the root CA's signing certificate is not in the trusted CA certificate location, or that c_rehash needs to be run on the certificate directory. For details, please see the documentation of --sslcertpath and --sslcertfile in the manual page. See README.SSL for details.\n" msgstr "Esto significa que el certificado raíz de firma confiable no está en las ubicaciones de certificados confiables, o que se necesita ejecutar c_rehash en el directorio de certificado. Para más detalles, por favor consulte la documentación de --sslcertpath y --sslcertfile en la página de manual. Consulte README.SSL para más detalles.\n" #: socket.c:954 socket.c:1030 msgid "Your OpenSSL version does not support SSLv3.\n" msgstr "Su versión de OpenSSL no admite SSLv3.\n" #: socket.c:972 socket.c:1048 msgid "Your OpenSSL version does not support TLS v1.1.\n" msgstr "Su versión de OpenSSL no admite TLS v1.1.\n" #: socket.c:983 socket.c:1059 msgid "Your OpenSSL version does not support TLS v1.2.\n" msgstr "Su versión de OpenSSL no admite TLS v1.2.\n" #: socket.c:994 socket.c:1070 msgid "Your OpenSSL version does not support TLS v1.3.\n" msgstr "Su versión de OpenSSL no admite TLS v1.3.\n" #: socket.c:1003 socket.c:1080 #, c-format msgid "Invalid SSL protocol '%s' specified, using default autoselect (auto).\n" msgstr "El protocolo SSL «%s» especificado es inválido, usando el predeterminado (auto).\n" #: socket.c:1119 #, c-format msgid "Loaded OpenSSL library %#lx older than headers %#lx, refusing to work.\n" msgstr "La biblioteca OpenSSL %#lx cargada es más antigua que los encabezados %#lx, no se puede continuar.\n" #: socket.c:1124 #, c-format msgid "Loaded OpenSSL library %#lx newer than headers %#lx, trying to continue.\n" msgstr "La biblioteca OpenSSL %#lx cargada es más nueva que los encabezados %#lx, intentando continuar.\n" #: socket.c:1144 msgid "File descriptor out of range for SSL" msgstr "Descriptor de archivo fuera de rango para SSL" #: socket.c:1166 msgid "Note that some distributions disable older protocol versions in weird non-standard ways. Try a newer protocol version.\n" msgstr "Note que algunas distribuciones desactivan versiones de protocolo más antiguas en formas extrañas. Intente una versión de protoloco más reciente.\n" #: socket.c:1228 #, c-format msgid "Cannot load verify locations (file=\"%s\", dir=\"%s\"), error %d:\n" msgstr "No se pueden cargar las ubicaciones de verificación (archivo=\"%s\", dir=\"%s\"), error %d:\n" #: socket.c:1263 #, c-format msgid "Warning: SSL_set_tlsext_host_name(%p, \"%s\") failed (code %#lx), trying to continue.\n" msgstr "Aviso: falló SSL_set_tlsext_host_name(%p, \"%s\") (código %#lx), intentando continuar.\n" #: socket.c:1277 #, c-format msgid "fetchmail: sock %d: wolfSSL_check_domain_name(%#p, \"%s\") returned %d, trying to continue\n" msgstr "fetchmail: sock %d: wolfSSL_check_domain_name(%#p, \"%s\") devolvió %d, intentando continuar.\n" #: socket.c:1293 #, c-format msgid "Warning: X509_VERIFY_PARAM_set1_host(%p, \"%s\") failed (code %#x), trying to continue.\n" msgstr "Aviso: falló X509_VERIFY_PARAM_set1_host(%p, \"%s\") (código %#x), intentando continuar.\n" #: socket.c:1346 msgid "Server shut down connection prematurely during SSL_connect().\n" msgstr "El servidor cerró la conexión prematuramente durante SSL_connect().\n" #: socket.c:1349 #, c-format msgid "System error during SSL_connect(): %s\n" msgstr "Error de sistema durante SSL_connect(): %s\n" #: socket.c:1349 msgid "handshake failed at protocol or connection level." msgstr "la negociación falló en el nivel de protocolo o conexión." #: socket.c:1369 msgid "Cannot obtain current SSL/TLS cipher - no session established?\n" msgstr "No se puede obtener el cifrado SSL/TLS actual - ¿no hay una sesión establecida?\n" #: socket.c:1372 #, c-format msgid "SSL/TLS: using protocol %s, cipher %s, %d/%d secret/processed bits\n" msgstr "SSL/TLS: se usa el protocolo %s, cifrado %s, bits %d/%d secretos/procesados\n" #: socket.c:1379 msgid "Certificate/fingerprint verification was somehow skipped!\n" msgstr "¡La verificación de certificado/huella digital fue de algún modo omitida!\n" #: socket.c:1396 msgid "Warning: the connection is insecure, continuing anyways. (Better use --sslcertck!)\n" msgstr "Aviso: la conexión es insegura, continuando de cualquier manera. (¡Mejor use --sslcertck!)\n" #: socket.c:1438 msgid "Cygwin socket read retry\n" msgstr "Reintento de lectura del zócalo cygwin\n" #: socket.c:1441 msgid "Cygwin socket read retry failed!\n" msgstr "¡Falló el reintento de lectura del zócalo cygwin\n" #: transact.c:79 #, c-format msgid "mapped address %s to local %s\n" msgstr "dirección %s asignada al %s local\n" #: transact.c:101 #, c-format msgid "mapped %s to local %s\n" msgstr "%s asignado al %s local\n" #: transact.c:168 #, c-format msgid "passed through %s matching %s\n" msgstr "se atravesó %s coincidiendo con %s\n" #: transact.c:240 #, c-format msgid "" "analyzing Received line:\n" "%s" msgstr "" "analizando línea «Received»:\n" "%s" #: transact.c:279 #, c-format msgid "line accepted, %s is an alias of the mailserver\n" msgstr "línea aceptada, %s es un alias del servidor de correo\n" #: transact.c:285 #, c-format msgid "line rejected, %s is not an alias of the mailserver\n" msgstr "línea rechazada, %s no es un alias del servidor de correo\n" #: transact.c:359 msgid "no Received address found\n" msgstr "no se encontró la dirección de «Received»\n" #: transact.c:368 #, c-format msgid "found Received address `%s'\n" msgstr "se encontró la dirección de «Received» «%s»\n" #: transact.c:613 msgid "incorrect header line found - see manpage for bad-header option\n" msgstr "se encontró una línea de encabezado incorrecta - consulte la página de manual para la opción bad-header\n" #: transact.c:615 #, c-format msgid "line: %s" msgstr "línea: %s" #: transact.c:1087 transact.c:1097 #, c-format msgid "Parsing envelope \"%s\" names \"%-.*s\"\n" msgstr "Analizando el sobre \"%s\" nombres \"%-.*s\"\n" #: transact.c:1112 #, c-format msgid "Parsing Received names \"%-.*s\"\n" msgstr "Analizando los nombres «Received» \"%-.*s\"\n" #: transact.c:1124 msgid "No envelope recipient found, resorting to header guessing.\n" msgstr "No se encontró un destinatario en el sobre, adivinando con la información del encabezado.\n" #: transact.c:1142 #, c-format msgid "Guessing from header \"%-.*s\".\n" msgstr "Adivinando del encabezado \"%-.*s\"\n" #: transact.c:1157 #, c-format msgid "no local matches, forwarding to %s\n" msgstr "no hay coincidencias locales, reenviado a %s\n" #: transact.c:1172 msgid "forwarding and deletion suppressed due to DNS errors\n" msgstr "reenvío y borrado suprimido debido a errores de DNS\n" #: transact.c:1283 msgid "writing RFC822 msgblk.headers\n" msgstr "escribiendo encabezados RFC822\n" #: transact.c:1302 msgid "no recipient addresses matched declared local names" msgstr "ninguna dirección de destino coincidió con los nombres locales declarados" #: transact.c:1309 #, c-format msgid "recipient address %s didn't match any local name" msgstr "la dirección de destino %s no coincide con ningún nombre local" #: transact.c:1318 msgid "message has embedded NULs" msgstr "el mensaje contiene NULs" #: transact.c:1326 msgid "SMTP listener rejected local recipient addresses: " msgstr "El servidor SMTP rechazó las direcciones locales de destino: " #: transact.c:1376 msgid "error writing message text\n" msgstr "error al escribir el texto del mensaje\n" #: transact.c:1652 #, c-format msgid "Buffer too small. This is a bug in the caller of %s:%lu.\n" msgstr "El espacio es demasiado pequeño. Es un error en la invocación de %s:%lu.\n" #: uid.c:262 #, c-format msgid "Open or read error while reading idfile %s: %s\n" msgstr "Error al abrir o leer mientras se lee el archivo de ids «%s»: %s\n" #: uid.c:273 #, c-format msgid "Old UID list from %s:\n" msgstr "Lista de UID antiguas de %s:\n" #: uid.c:277 uid.c:286 uid.c:355 msgid " " msgstr " " #: uid.c:284 msgid "Scratch list of UIDs:\n" msgstr "Lista borrador de UIDs:\n" #: uid.c:369 uid.c:413 #, c-format msgid "Merged UID list from %s:\n" msgstr "Lista de UID combinada de %s:\n" #: uid.c:372 #, c-format msgid "New UID list from %s:\n" msgstr "Lista nueva de UID de %s:\n" #: uid.c:402 msgid "not swapping UID lists, no UIDs seen this query\n" msgstr "no se intercambian las listas de UID, no se encontraron UID en esta consulta\n" #: uid.c:422 msgid "discarding new UID list\n" msgstr "descartando la nueva lista de UID\n" #: uid.c:479 msgid "Deleting fetchids file.\n" msgstr "Borrando el archivo fetchids.\n" #: uid.c:482 #, c-format msgid "Error deleting %s: %s\n" msgstr "Error borrando %s: %s\n" #: uid.c:489 msgid "Writing fetchids file.\n" msgstr "Escribiendo el archivo fetchids.\n" #: uid.c:503 uid.c:512 #, c-format msgid "Write error on fetchids file %s: %s\n" msgstr "Error escribiendo en el archivo fetchids %s: %s\n" #: uid.c:524 #, c-format msgid "Error writing to fetchids file %s, old file left in place.\n" msgstr "Error escribiendo al archivo fetchids %s. Se dejó el archivo original intacto.\n" #: uid.c:528 #, c-format msgid "Cannot rename fetchids file %s to %s: %s\n" msgstr "No se puede renombrar el archivo fetchids %s a %s: %s\n" #: uid.c:532 #, c-format msgid "Cannot open fetchids file %s for writing: %s\n" msgstr "No se puede abrir el archivo fetchids %s para escritura: %s\n" #: xmalloc.c:28 msgid "malloc failed\n" msgstr "malloc falló\n" #: xmalloc.c:42 msgid "realloc failed\n" msgstr "realloc falló\n" #~ msgid "WARNING: Compiled against LibreSSL, which is not a supported configuration.\n" #~ msgstr "AVISO: Compilado con LibreSSL, es una configuración sin soporte.\n" #~ msgid "Required LOGIN capability not supported by server\n" #~ msgstr "La capacidad LOGIN requerida no está permitida por el servidor\n" #~ msgid "Saved error is still %d\n" #~ msgstr "El error guardado es aún %d\n" #~ msgid "swapping UID lists\n" #~ msgstr "se intercambian listas de UID\n" #~ msgid "Subject: Fetchmail unreachable-server warning." #~ msgstr "Asunto: aviso de fetchmail servidor fuera de alcance." #~ msgid "Fetchmail could not reach the mail server %s:" #~ msgstr "Fetchmail no puede alcanzar al servidor de correo %s:" #~ msgid "fetchmail: Warning: syslog and logfile are set. Check both for logs!\n" #~ msgstr "fetchmail: Aviso: syslog y logfile están establecidos. Compruebe ambos registros\n" #~ msgid "unknown issuer (first %d characters): %s\n" #~ msgstr "Emisor desconocido (primeros %d caracteres): %s\n" #~ msgid "krb5_sendauth: %s [server says '%*s'] \n" #~ msgstr "krb5_sendauth: %s [el servidor dice «%*s»] \n" #~ msgid "Server CommonName: %s\n" #~ msgstr "«CommonName» del servidor: %s\n" #~ msgid "message delimiter found while scanning headers\n" #~ msgstr "delimitador de mensajes encontrado durante la exploración de encabezados\n" #~ msgid "SIGPIPE thrown from an MDA or a stream socket error\n" #~ msgstr "SIGPIPE lanzado desde un MDA o un error de socket de flujo\n" #~ msgid "internal inconsistency\n" #~ msgstr "inconsistencia interna\n" #~ msgid "name is valid but has no IP address." #~ msgstr "el nombre es válido pero no tiene dirección IP." #~ msgid "unrecoverable name server error." #~ msgstr "error irrecuperable en el servidor de nombres." #~ msgid "temporary name server error." #~ msgstr "error temporario en el servidor de nombres." #~ msgid "unknown DNS error %d." #~ msgstr "error desconocido en el DNS %d." #~ msgid "Option --remote is not supported with ETRN\n" #~ msgstr "La opción --remote no es soportada con ETRN\n" #~ msgid "Cannot support ETRN without gethostbyname(2).\n" #~ msgstr "No se puede soportar ETRN sin gethostbyname(2).\n" #~ msgid "Cannot support ODMR without gethostbyname(2).\n" #~ msgstr "No se puede soportar ODMR sin gethostbyname(2).\n" #~ msgid " (using network security options %s)" #~ msgstr " (usando opciones de seguridad de red %s)" #~ msgid " (using port %d)" #~ msgstr " (usando puerto %d)" #~ msgid "Received" #~ msgstr "«Received»" #~ msgid "alloca failed" #~ msgstr "alloca falló" #~ msgid "warning: found \"%s\" before any host names" #~ msgstr "cuidado: “%s” encontrado antes que cualquier nombre de máquina" #~ msgid "Option --remote is not supported with ODMR\n" #~ msgstr "La opción --remote no es soportada con ODMR\n" #~ msgid "fetchmail: network security support is disabled\n" #~ msgstr "fetchmail: el soporte de seguridad de red está desactivado\n" #~ msgid " -T, --netsec set IP security request\n" #~ msgstr " -T, --netsec configurar el pedido de seguridad IP\n" #~ msgid "invalid security request" #~ msgstr "requerimiento de seguridad inválido" #~ msgid "network-security support disabled" #~ msgstr "soporte de seguridad de red desactivado" #~ msgid "fetchmail: getaddrinfo(%s.%s)\n" #~ msgstr "fetchmail: getaddrinfo(%s.%s)\n" #~ msgid "fetchmail: illegal address length received for host %s\n" #~ msgstr "fetchmail: largo de dirección ilegal recibido de la máquina %s\n"