# XZ Utils French Translation # This file is put in the public domain. # Adrien Nader , 2011-2014. # Stéphane Aulery , 2019. # msgid "" msgstr "" "Project-Id-Version: xz-5.2.4\n" "Report-Msgid-Bugs-To: xz@tukaani.org\n" "POT-Creation-Date: 2023-05-04 22:32+0800\n" "PO-Revision-Date: 2019-05-12 05:46+0200\n" "Last-Translator: Stéphane Aulery \n" "Language-Team: French \n" "Language: fr\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Bugs: Report translation errors to the Language-Team address.\n" "Plural-Forms: nplurals=2; plural=(n==1) ? 0 : 1;\n" #: src/xz/args.c:77 #, c-format msgid "%s: Invalid argument to --block-list" msgstr "%s : argument de l'option --block-list invalide" #: src/xz/args.c:87 #, c-format msgid "%s: Too many arguments to --block-list" msgstr "%s : trop d'arguments pour l'option --block-list" #: src/xz/args.c:116 msgid "0 can only be used as the last element in --block-list" msgstr "0 peut seulement être utilisé en dernier élément de --block-list" #: src/xz/args.c:451 #, c-format msgid "%s: Unknown file format type" msgstr "%s : Format de fichier inconnu" #: src/xz/args.c:474 src/xz/args.c:482 #, c-format msgid "%s: Unsupported integrity check type" msgstr "%s : Type de vérification d'intégrité inconnu" #: src/xz/args.c:518 msgid "Only one file can be specified with `--files' or `--files0'." msgstr "Un seul fichier peut être spécifié avec `--files' ou `--files0'." #: src/xz/args.c:586 #, c-format msgid "The environment variable %s contains too many arguments" msgstr "La variable d'environnement %s contient trop d'arguments" #: src/xz/args.c:688 msgid "Compression support was disabled at build time" msgstr "Le support de la compression à était désactivé lors de la compilaton" #: src/xz/args.c:695 msgid "Decompression support was disabled at build time" msgstr "Le support de la décompression a été désactivé lors de la compilation" #: src/xz/args.c:701 msgid "Compression of lzip files (.lz) is not supported" msgstr "" #: src/xz/args.c:732 #, fuzzy #| msgid "%s: With --format=raw, --suffix=.SUF is required unless writing to stdout" msgid "With --format=raw, --suffix=.SUF is required unless writing to stdout" msgstr "%s : Avec --format=raw, --suffix=.SUF est nécessaire sauf lors de l'écriture vers stdout" #: src/xz/coder.c:115 msgid "Maximum number of filters is four" msgstr "Le nombre maximal de filtres est quatre" #: src/xz/coder.c:134 msgid "Memory usage limit is too low for the given filter setup." msgstr "La limite d'utilisation mémoire est trop basse pour la configuration de filtres donnée." #: src/xz/coder.c:169 msgid "Using a preset in raw mode is discouraged." msgstr "Utiliser un préréglage en mode `raw' est déconseillé." #: src/xz/coder.c:171 msgid "The exact options of the presets may vary between software versions." msgstr "Le détail des préréglages peut varier entre différentes versions du logiciel." #: src/xz/coder.c:194 msgid "The .lzma format supports only the LZMA1 filter" msgstr "Le format .lzma ne prend en charge que le filtre LZMA1" #: src/xz/coder.c:202 msgid "LZMA1 cannot be used with the .xz format" msgstr "Le filtre LZMA1 ne peut être utilisé avec le format .xz" #: src/xz/coder.c:219 msgid "The filter chain is incompatible with --flush-timeout" msgstr "La Chaine de filtre est incompatible avec --flush-timeout" #: src/xz/coder.c:225 msgid "Switching to single-threaded mode due to --flush-timeout" msgstr "Bascule en mode mono-processus à cause de --flush-timeout" #: src/xz/coder.c:249 #, c-format msgid "Using up to % threads." msgstr "Jusqu'à % threads seront utilisés." #: src/xz/coder.c:265 msgid "Unsupported filter chain or filter options" msgstr "Enchaînement ou options de filtres non pris en charge" #: src/xz/coder.c:277 #, c-format msgid "Decompression will need %s MiB of memory." msgstr "La décompression nécessitera %s MiB de mémoire." #: src/xz/coder.c:309 #, fuzzy, c-format msgid "Reduced the number of threads from %s to %s to not exceed the memory usage limit of %s MiB" msgstr "Nombre de threads réduit de %s à %s pour ne pas dépasser la limite d'utilisation mémoire de %s MiB" #: src/xz/coder.c:329 #, c-format msgid "Reduced the number of threads from %s to one. The automatic memory usage limit of %s MiB is still being exceeded. %s MiB of memory is required. Continuing anyway." msgstr "" #: src/xz/coder.c:356 #, fuzzy, c-format msgid "Switching to single-threaded mode to not exceed the memory usage limit of %s MiB" msgstr "Nombre de threads réduit de %s à %s pour ne pas dépasser la limite d'utilisation mémoire de %s MiB" #: src/xz/coder.c:411 #, c-format msgid "Adjusted LZMA%c dictionary size from %s MiB to %s MiB to not exceed the memory usage limit of %s MiB" msgstr "Taille du dictionnaire LZMA%c réduite de %s MiB à %s MiB pour ne pas dépasser la limite d'utilisation mémoire de %s MiB" #: src/xz/file_io.c:110 src/xz/file_io.c:118 #, c-format msgid "Error creating a pipe: %s" msgstr "Impossible de créer un tube anonyme (pipe) : %s" #: src/xz/file_io.c:252 msgid "Failed to enable the sandbox" msgstr "Echec de l'activation de la sandboxe" #: src/xz/file_io.c:294 #, c-format msgid "%s: poll() failed: %s" msgstr "%s : L'appel à la fonction poll() a échoué : %s" #. TRANSLATORS: When compression or decompression finishes, #. and xz is going to remove the source file, xz first checks #. if the source file still exists, and if it does, does its #. device and inode numbers match what xz saw when it opened #. the source file. If these checks fail, this message is #. shown, %s being the filename, and the file is not deleted. #. The check for device and inode numbers is there, because #. it is possible that the user has put a new file in place #. of the original file, and in that case it obviously #. shouldn't be removed. #: src/xz/file_io.c:361 #, c-format msgid "%s: File seems to have been moved, not removing" msgstr "%s : Le fichier a apparemment été déplacé, suppression annulée" #: src/xz/file_io.c:368 src/xz/file_io.c:924 #, c-format msgid "%s: Cannot remove: %s" msgstr "%s : Impossible de supprimer : %s" #: src/xz/file_io.c:394 #, c-format msgid "%s: Cannot set the file owner: %s" msgstr "%s : Impossible de modifier le propriétaire du fichier : %s" #: src/xz/file_io.c:407 #, c-format msgid "%s: Cannot set the file group: %s" msgstr "%s : Impossible de modifier le groupe propriétaire du fichier : %s" #: src/xz/file_io.c:426 #, c-format msgid "%s: Cannot set the file permissions: %s" msgstr "%s : Impossible de modifier les permissions du fichier : %s" # Note from translator on "file status flags". # The following entry is kept un-translated on purpose. It is difficult to # translate and should only happen in exceptional circumstances which means # that translating would: # - lose some of the meaning # - make it more difficult to look up in search engines; it might happen one in # a million times, if we dilute the error message in 20 languages, it will be # almost impossible to find an explanation and support for the error. #: src/xz/file_io.c:552 #, c-format msgid "Error getting the file status flags from standard input: %s" msgstr "Echec de la lecture du drapeau d'état du fichier depuis la sortie standard : %s" #: src/xz/file_io.c:610 src/xz/file_io.c:672 #, c-format msgid "%s: Is a symbolic link, skipping" msgstr "%s est un lien symbolique : ignoré" #: src/xz/file_io.c:701 #, c-format msgid "%s: Is a directory, skipping" msgstr "%s est un répertoire : ignoré" #: src/xz/file_io.c:707 #, c-format msgid "%s: Not a regular file, skipping" msgstr "%s n'est pas un fichier régulier : ignoré" #: src/xz/file_io.c:724 #, c-format msgid "%s: File has setuid or setgid bit set, skipping" msgstr "%s : Le fichier possède les bits `setuid' ou `setgid' : ignoré" #: src/xz/file_io.c:731 #, c-format msgid "%s: File has sticky bit set, skipping" msgstr "%s : Le fichier possède le bit `sticky' : ignoré" #: src/xz/file_io.c:738 #, c-format msgid "%s: Input file has more than one hard link, skipping" msgstr "%s : Le fichier d'entrée a plus d'un lien matériel : ignoré" #: src/xz/file_io.c:780 msgid "Empty filename, skipping" msgstr "Nom de fichier vide, ignoré" # See note from translator above titled "file status flags". #: src/xz/file_io.c:834 #, c-format msgid "Error restoring the status flags to standard input: %s" msgstr "Erreur de restauration du drapeau d'état de l'entrée standard : %s" # See note from translator above titled "file status flags". #: src/xz/file_io.c:882 #, c-format msgid "Error getting the file status flags from standard output: %s" msgstr "Erreur de lecture du drapeau d'état du fichier depuis la sortie standard : %s" #: src/xz/file_io.c:1060 #, c-format msgid "Error restoring the O_APPEND flag to standard output: %s" msgstr "Impossible de rétablir le drapeau O_APPEND sur la sortie standard : %s" #: src/xz/file_io.c:1072 #, c-format msgid "%s: Closing the file failed: %s" msgstr "%s : Impossible de fermer le fichier : %s" #: src/xz/file_io.c:1108 src/xz/file_io.c:1371 #, c-format msgid "%s: Seeking failed when trying to create a sparse file: %s" msgstr "%s : Impossible de se déplacer dans le fichier pour créer un 'sparse file' : %s" #: src/xz/file_io.c:1209 #, c-format msgid "%s: Read error: %s" msgstr "%s : Erreur d'écriture : %s" #: src/xz/file_io.c:1239 #, c-format msgid "%s: Error seeking the file: %s" msgstr "%s : Impossible de se déplacer dans le fichier : %s" #: src/xz/file_io.c:1263 #, c-format msgid "%s: Unexpected end of file" msgstr "%s : Fin de fichier inattendue" #: src/xz/file_io.c:1322 #, c-format msgid "%s: Write error: %s" msgstr "%s : Erreur d'écriture : %s" #: src/xz/hardware.c:238 msgid "Disabled" msgstr "Désactivé" #: src/xz/hardware.c:269 #, fuzzy msgid "Amount of physical memory (RAM):" msgstr "Quantité totale de mémoire physique (RAM) : " #: src/xz/hardware.c:270 msgid "Number of processor threads:" msgstr "" #: src/xz/hardware.c:271 msgid "Compression:" msgstr "" #: src/xz/hardware.c:272 msgid "Decompression:" msgstr "" #: src/xz/hardware.c:273 #, fuzzy msgid "Multi-threaded decompression:" msgstr "Limite d'utilisation pour la décompression : " #: src/xz/hardware.c:274 msgid "Default for -T0:" msgstr "" #: src/xz/hardware.c:292 msgid "Hardware information:" msgstr "" #: src/xz/hardware.c:299 #, fuzzy msgid "Memory usage limits:" msgstr "Limite d'utilisation mémoire atteinte" #: src/xz/list.c:68 msgid "Streams:" msgstr "" #: src/xz/list.c:69 msgid "Blocks:" msgstr "" #: src/xz/list.c:70 #, fuzzy msgid "Compressed size:" msgstr " Taille données avec compression : %s\n" #: src/xz/list.c:71 #, fuzzy msgid "Uncompressed size:" msgstr " Taille données sans compression : %s\n" #: src/xz/list.c:72 msgid "Ratio:" msgstr "" #: src/xz/list.c:73 msgid "Check:" msgstr "" #: src/xz/list.c:74 #, fuzzy msgid "Stream Padding:" msgstr " Octets de rembourrage du flux : %s\n" #: src/xz/list.c:75 #, fuzzy msgid "Memory needed:" msgstr " Mémoire nécessaire : %s MiB\n" #: src/xz/list.c:76 #, fuzzy msgid "Sizes in headers:" msgstr " Tailles stockées dans l'en-tête : %s\n" #: src/xz/list.c:79 #, fuzzy msgid "Number of files:" msgstr " Nombre de fichiers : %s\n" #: src/xz/list.c:122 msgid "Stream" msgstr "" #: src/xz/list.c:123 msgid "Block" msgstr "" #: src/xz/list.c:124 msgid "Blocks" msgstr "" #: src/xz/list.c:125 msgid "CompOffset" msgstr "" #: src/xz/list.c:126 msgid "UncompOffset" msgstr "" #: src/xz/list.c:127 msgid "CompSize" msgstr "" #: src/xz/list.c:128 msgid "UncompSize" msgstr "" #: src/xz/list.c:129 #, fuzzy msgid "TotalSize" msgstr "Totaux :" #: src/xz/list.c:130 msgid "Ratio" msgstr "" #: src/xz/list.c:131 msgid "Check" msgstr "" #: src/xz/list.c:132 msgid "CheckVal" msgstr "" #: src/xz/list.c:133 msgid "Padding" msgstr "" #: src/xz/list.c:134 msgid "Header" msgstr "" #: src/xz/list.c:135 msgid "Flags" msgstr "" #: src/xz/list.c:136 msgid "MemUsage" msgstr "" #: src/xz/list.c:137 msgid "Filters" msgstr "" #. TRANSLATORS: Indicates that there is no integrity check. #. This string is used in tables. In older xz version this #. string was limited to ten columns in a fixed-width font, but #. nowadays there is no strict length restriction anymore. #: src/xz/list.c:169 msgid "None" msgstr "Aucune" #. TRANSLATORS: Indicates that integrity check name is not known, #. but the Check ID is known (here 2). In older xz version these #. strings were limited to ten columns in a fixed-width font, but #. nowadays there is no strict length restriction anymore. #: src/xz/list.c:175 msgid "Unknown-2" msgstr "Inconnue-2" #: src/xz/list.c:176 msgid "Unknown-3" msgstr "Inconnue-3" #: src/xz/list.c:178 msgid "Unknown-5" msgstr "Inconnue-5" #: src/xz/list.c:179 msgid "Unknown-6" msgstr "Inconnue-6" #: src/xz/list.c:180 msgid "Unknown-7" msgstr "Inconnue-7" #: src/xz/list.c:181 msgid "Unknown-8" msgstr "Inconnue-8" #: src/xz/list.c:182 msgid "Unknown-9" msgstr "Inconnue-9" #: src/xz/list.c:184 msgid "Unknown-11" msgstr "Inconnue-11" #: src/xz/list.c:185 msgid "Unknown-12" msgstr "Inconnue-12" #: src/xz/list.c:186 msgid "Unknown-13" msgstr "Inconnue-13" #: src/xz/list.c:187 msgid "Unknown-14" msgstr "Inconnue-14" #: src/xz/list.c:188 msgid "Unknown-15" msgstr "Inconnue-15" #: src/xz/list.c:351 #, c-format msgid "%s: File is empty" msgstr "%s : Le fichier est vide" #: src/xz/list.c:356 #, c-format msgid "%s: Too small to be a valid .xz file" msgstr "%s : Trop petit pour être un fichier xz valide." #. TRANSLATORS: These are column headings. From Strms (Streams) #. to Ratio, the columns are right aligned. Check and Filename #. are left aligned. If you need longer words, it's OK to #. use two lines here. Test with "xz -l foo.xz". #: src/xz/list.c:730 msgid "Strms Blocks Compressed Uncompressed Ratio Check Filename" msgstr "Flux Blocs Compressé Décompressé Ratio Vérif. Nom de fichier" #: src/xz/list.c:1025 src/xz/list.c:1203 msgid "Yes" msgstr "Oui" #: src/xz/list.c:1025 src/xz/list.c:1203 msgid "No" msgstr "Non" #: src/xz/list.c:1027 src/xz/list.c:1205 #, c-format msgid " Minimum XZ Utils version: %s\n" msgstr " Version minimale de XZ Utils : %s\n" #. TRANSLATORS: %s is an integer. Only the plural form of this #. message is used (e.g. "2 files"). Test with "xz -l foo.xz bar.xz". #: src/xz/list.c:1178 #, c-format msgid "%s file\n" msgid_plural "%s files\n" msgstr[0] "%s fichier\n" msgstr[1] "%s fichiers\n" #: src/xz/list.c:1191 msgid "Totals:" msgstr "Totaux :" #: src/xz/list.c:1269 msgid "--list works only on .xz files (--format=xz or --format=auto)" msgstr "--list ne marche que sur les fichiers .xz (--format=xz ou --format=auto)" #: src/xz/list.c:1275 msgid "--list does not support reading from standard input" msgstr "--list est incompatible avec la lecture sur l'entrée standard" #: src/xz/main.c:89 #, c-format msgid "%s: Error reading filenames: %s" msgstr "%s : Erreur lors de la lecture des noms de fichiers : %s" #: src/xz/main.c:96 #, c-format msgid "%s: Unexpected end of input when reading filenames" msgstr "%s : Fin des données inattendue lors de la lecture des noms de fichiers" #: src/xz/main.c:120 #, c-format msgid "%s: Null character found when reading filenames; maybe you meant to use `--files0' instead of `--files'?" msgstr "%s : Caractère NULL détecté lors de la lecture des noms de fichiers ; peut-être pensiez-vous à `--files0' plutot qu'a `--files' ?" #: src/xz/main.c:188 msgid "Compression and decompression with --robot are not supported yet." msgstr "La compression et la décompression ne marchent pas encore avec --robot." #: src/xz/main.c:266 msgid "Cannot read data from standard input when reading filenames from standard input" msgstr "Impossible de lire à la fois les données et les noms de fichiers depuis l'entrée standard" #. TRANSLATORS: This is the program name in the beginning #. of the line in messages. Usually it becomes "xz: ". #. This is a translatable string because French needs #. a space before a colon. #: src/xz/message.c:725 #, c-format msgid "%s: " msgstr "%s : " #: src/xz/message.c:797 src/xz/message.c:856 msgid "Internal error (bug)" msgstr "Erreur interne (bug)" #: src/xz/message.c:804 msgid "Cannot establish signal handlers" msgstr "Impossible d'installer le gestionnaire de signaux" #: src/xz/message.c:813 msgid "No integrity check; not verifying file integrity" msgstr "Pas de données de vérification d'intégrité ; vérification non effectuée" #: src/xz/message.c:816 msgid "Unsupported type of integrity check; not verifying file integrity" msgstr "Méthode de vérification d'intégrité non prise en charge ; vérification non effectuée" #: src/xz/message.c:823 msgid "Memory usage limit reached" msgstr "Limite d'utilisation mémoire atteinte" #: src/xz/message.c:826 msgid "File format not recognized" msgstr "Format de fichier inconnu" #: src/xz/message.c:829 msgid "Unsupported options" msgstr "Options non prises en charge" #: src/xz/message.c:832 msgid "Compressed data is corrupt" msgstr "Les données compressées sont corrompues" #: src/xz/message.c:835 msgid "Unexpected end of input" msgstr "Fin des données inattendue " #: src/xz/message.c:877 #, c-format msgid "%s MiB of memory is required. The limiter is disabled." msgstr "%s MiB de mémoire sont nécessaires. La limite est désactivée." #: src/xz/message.c:905 #, c-format msgid "%s MiB of memory is required. The limit is %s." msgstr "%s MiB de mémoire sont nécessaires, la limite étant %s." #: src/xz/message.c:924 #, c-format msgid "%s: Filter chain: %s\n" msgstr "%s : Enchaînement de filtres : %s\n" #: src/xz/message.c:935 #, c-format msgid "Try `%s --help' for more information." msgstr "Éxécutez `%s --help' pour obtenir davantage d'informations." #: src/xz/message.c:961 #, c-format msgid "" "Usage: %s [OPTION]... [FILE]...\n" "Compress or decompress FILEs in the .xz format.\n" "\n" msgstr "" "Utilisation : %s [OPTION]... [FICHIER]...\n" "Compresse ou decompresse FICHIER(s) au format .xz.\n" "\n" #: src/xz/message.c:968 msgid "Mandatory arguments to long options are mandatory for short options too.\n" msgstr "" "Les arguments obligatoires pour les options longues le sont aussi pour les\n" "options courtes.\n" #: src/xz/message.c:972 msgid " Operation mode:\n" msgstr " Mode d'opération :\n" #: src/xz/message.c:975 msgid "" " -z, --compress force compression\n" " -d, --decompress force decompression\n" " -t, --test test compressed file integrity\n" " -l, --list list information about .xz files" msgstr "" " -z, --compress forcer le mode compression\n" " -d, --decompress forcer le mode décompression\n" " -t, --test tester l'intégrité du fichier compressé\n" " -l, --list lister les informations sur les fichiers .xz" #: src/xz/message.c:981 msgid "" "\n" " Operation modifiers:\n" msgstr "" "\n" " Modificateurs :\n" #: src/xz/message.c:984 msgid "" " -k, --keep keep (don't delete) input files\n" " -f, --force force overwrite of output file and (de)compress links\n" " -c, --stdout write to standard output and don't delete input files" msgstr "" " -k, --keep ne pas supprimer les fichiers d'entrée\n" " -f, --force forcer l'écrasement éventuel du fichier de sortie et\n" " (dé)compresser les liens symboliques\n" " -c, --stdout écrire sur la sortie standard et ne pas supprimer les\n" " fichiers d'entrée" #: src/xz/message.c:993 msgid "" " --single-stream decompress only the first stream, and silently\n" " ignore possible remaining input data" msgstr "" " --single-stream décompresser uniquement le premier flux et ignorer\n" " silencieusement les données éventuellement restantes" #: src/xz/message.c:996 msgid "" " --no-sparse do not create sparse files when decompressing\n" " -S, --suffix=.SUF use the suffix `.SUF' on compressed files\n" " --files[=FILE] read filenames to process from FILE; if FILE is\n" " omitted, filenames are read from the standard input;\n" " filenames must be terminated with the newline character\n" " --files0[=FILE] like --files but use the null character as terminator" msgstr "" " --no-sparse ne pas créer de 'sparse file' lors de la décompression\n" " -S, --suffix=.SUF utiliser le suffixe `.SUF' pour les fichiers compressés\n" " --files[=FILE] lire les fichiers sur lesquels opérer depuis FILE ; si\n" " FILE est omis, ceux-ci sont lus depuis l'entrée standard\n" " et doivent être suivis d'un caractère retour à la ligne\n" " --files0[=FILE] comme --files mais avec un caractère null comme séparateur" #: src/xz/message.c:1005 msgid "" "\n" " Basic file format and compression options:\n" msgstr "" "\n" " Options basiques de format de fichier et de compression :\n" #: src/xz/message.c:1007 #, fuzzy msgid "" " -F, --format=FMT file format to encode or decode; possible values are\n" " `auto' (default), `xz', `lzma', `lzip', and `raw'\n" " -C, --check=CHECK integrity check type: `none' (use with caution),\n" " `crc32', `crc64' (default), or `sha256'" msgstr "" " -F, --format=FMT format du fichier à encoder ou décoder ; sont acceptés :\n" " `auto' (par défaut), `xz', `lzma' et `raw'\n" " -C, --check=CHECK type de vérification d'intégrité : `none' (à utiliser avec\n" " précaution), `crc32', `crc64' (par défaut) ou `sha256'" #: src/xz/message.c:1012 msgid " --ignore-check don't verify the integrity check when decompressing" msgstr "" " --ignore-check ne pas vérifier l'intégrité des données lors de\n" " la décompression" #: src/xz/message.c:1016 msgid "" " -0 ... -9 compression preset; default is 6; take compressor *and*\n" " decompressor memory usage into account before using 7-9!" msgstr "" " -0 ... -9 préréglage de compression : 6 par défaut ; pensez à\n" " l'utilisation mémoire du compresseur *et* du décompresseur\n" " avant d'utiliser 7, 8 ou 9 !" #: src/xz/message.c:1020 msgid "" " -e, --extreme try to improve compression ratio by using more CPU time;\n" " does not affect decompressor memory requirements" msgstr "" " -e, --extreme essayer d'améliorer la compression en utilisant davantage\n" " de temps processeur ;\n" " n'affecte pas les besoins mémoire du décompresseur" #: src/xz/message.c:1024 msgid "" " -T, --threads=NUM use at most NUM threads; the default is 1; set to 0\n" " to use as many threads as there are processor cores" msgstr "" " -T, --threads=NB créer au plus NB fils de compression (1 par défault) ; la\n" " valeur 0 est spéciale et équivaut au nombre de processeurs\n" " de la machine" #: src/xz/message.c:1029 msgid "" " --block-size=SIZE\n" " start a new .xz block after every SIZE bytes of input;\n" " use this to set the block size for threaded compression" msgstr "" " --block-size=TAILLE\n" " débuter un bloc XZ après chaque TAILLE octets de données\n" " d'entrée ; ce réglage sert pour la compression paralléle" #: src/xz/message.c:1033 msgid "" " --block-list=SIZES\n" " start a new .xz block after the given comma-separated\n" " intervals of uncompressed data" msgstr "" " --block-list=TAILLES\n" " débuter des blocs XZ après les TAILLES octets de données\n" " spécifiées avec des virgules pour séparateur" #: src/xz/message.c:1037 msgid "" " --flush-timeout=TIMEOUT\n" " when compressing, if more than TIMEOUT milliseconds has\n" " passed since the previous flush and reading more input\n" " would block, all pending data is flushed out" msgstr "" " --flush-timeout=TIMEOUT\n" " pendant la compression, si plus de TIMEOUT ms ont passées\n" " depuis le dernier flush et que la lecture est bloquée,\n" " toutes les données en attente snt écrites" #: src/xz/message.c:1043 #, fuzzy, no-c-format msgid "" " --memlimit-compress=LIMIT\n" " --memlimit-decompress=LIMIT\n" " --memlimit-mt-decompress=LIMIT\n" " -M, --memlimit=LIMIT\n" " set memory usage limit for compression, decompression,\n" " threaded decompression, or all of these; LIMIT is in\n" " bytes, % of RAM, or 0 for defaults" msgstr "" " --memlimit-compress=LIMIT\n" " --memlimit-decompress=LIMIT\n" " -M, --memlimit=LIMIT\n" " règle la limite d'utilisation mémoire pour la compression,\n" " décompression ou les deux ; LIMIT est en octets,\n" " pourcentage de RAM, ou 0 pour la valeur par défaut" #: src/xz/message.c:1052 msgid "" " --no-adjust if compression settings exceed the memory usage limit,\n" " give an error instead of adjusting the settings downwards" msgstr "" " --no-adjust si les réglages de compression dépassent la limite\n" " d'utilisation mémoire, renvoyer une erreur plutôt que de\n" " diminuer les réglages" #: src/xz/message.c:1058 msgid "" "\n" " Custom filter chain for compression (alternative for using presets):" msgstr "" "\n" " Chaîne de filtres de compression personnalisée (en lieu des préréglages) :" #: src/xz/message.c:1067 msgid "" "\n" " --lzma1[=OPTS] LZMA1 or LZMA2; OPTS is a comma-separated list of zero or\n" " --lzma2[=OPTS] more of the following options (valid values; default):\n" " preset=PRE reset options to a preset (0-9[e])\n" " dict=NUM dictionary size (4KiB - 1536MiB; 8MiB)\n" " lc=NUM number of literal context bits (0-4; 3)\n" " lp=NUM number of literal position bits (0-4; 0)\n" " pb=NUM number of position bits (0-4; 2)\n" " mode=MODE compression mode (fast, normal; normal)\n" " nice=NUM nice length of a match (2-273; 64)\n" " mf=NAME match finder (hc3, hc4, bt2, bt3, bt4; bt4)\n" " depth=NUM maximum search depth; 0=automatic (default)" msgstr "" "\n" " --lzma1[=OPTS] LZMA1/2 ; OPTS est une liste d'options parmi les suivantes\n" " --lzma2[=OPTS] (entre parenthèses : valeurs valides et par défaut) :\n" " preset=PRE remettre les options à un préréglage (0-9[e])\n" " dict=NUM taille dictionnaire (4KiB - 1536MiB ; 8MiB)\n" " lc=NUM nombre de 'literal context bits' (0-4 ; 3)\n" " lp=NUM nombre de 'literal position bits' (0-4 ; 0)\n" " pb=NUM nombre de 'position bits' (0-4 ; 2)\n" " mode=MODE mode de compression (fast, normal ; normal)\n" " nice=NUM nice length of a match (2-273; 64)\n" " mf=NAME 'match finder' (hc3, hc4, bt2, bt3, bt4; bt4)\n" " depth=NUM profondeur de recherche maximale ;\n" " 0=automatique (par défaut)" #: src/xz/message.c:1082 #, fuzzy msgid "" "\n" " --x86[=OPTS] x86 BCJ filter (32-bit and 64-bit)\n" " --arm[=OPTS] ARM BCJ filter\n" " --armthumb[=OPTS] ARM-Thumb BCJ filter\n" " --arm64[=OPTS] ARM64 BCJ filter\n" " --powerpc[=OPTS] PowerPC BCJ filter (big endian only)\n" " --ia64[=OPTS] IA-64 (Itanium) BCJ filter\n" " --sparc[=OPTS] SPARC BCJ filter\n" " Valid OPTS for all BCJ filters:\n" " start=NUM start offset for conversions (default=0)" msgstr "" "\n" " --x86[=OPTS] filtre BCJ x86 (32-bit et 64-bit)\n" " --powerpc[=OPTS] filtre BCJ PowerPC ('big endian' uniquement)\n" " --ia64[=OPTS] filtre BCJ IA-64 (Itanium)\n" " --arm[=OPTS] filtre BCJ ARM ('little endian' uniquement)\n" " --armthumb[=OPTS] filtre BCJ ARM-Thumb ('little endian' uniquement)\n" " --sparc[=OPTS] filtre BCJ SPARC\n" " OPTS valides pour tous les filtres BCJ :\n" " start=NUM position de début de la conversion (défaut=0)" #: src/xz/message.c:1095 msgid "" "\n" " --delta[=OPTS] Delta filter; valid OPTS (valid values; default):\n" " dist=NUM distance between bytes being subtracted\n" " from each other (1-256; 1)" msgstr "" "\n" " --delta[=OPTS] Filtre delta ; OPTS valides (vals. valides ; par défaut) :\n" " dist=NUM distance entre les octets soustraits les\n" " uns aux autres (1-256 ; 1)" #: src/xz/message.c:1103 msgid "" "\n" " Other options:\n" msgstr "" "\n" " Autres options :\n" #: src/xz/message.c:1106 msgid "" " -q, --quiet suppress warnings; specify twice to suppress errors too\n" " -v, --verbose be verbose; specify twice for even more verbose" msgstr "" " -q, --quiet masquer les avertissements ; spécifier deux fois pour\n" " aussi masquer les erreurs\n" " -v, --verbose être bavard ; spécifier deux fois pour l'être davantage" #: src/xz/message.c:1111 msgid " -Q, --no-warn make warnings not affect the exit status" msgstr " -Q, --no-warn les avertissements ne modifient pas le code de sortie" #: src/xz/message.c:1113 msgid " --robot use machine-parsable messages (useful for scripts)" msgstr "" " --robot utiliser des messages lisibles par un programme\n" " (utile pour les scripts)" #: src/xz/message.c:1116 msgid "" " --info-memory display the total amount of RAM and the currently active\n" " memory usage limits, and exit" msgstr "" " --info-memory afficher la quantité totale de RAM ainsi que la limite\n" " actuelle d'utilisation mémoire puis quitter" #: src/xz/message.c:1119 msgid "" " -h, --help display the short help (lists only the basic options)\n" " -H, --long-help display this long help and exit" msgstr "" " -h, --help afficher l'aide courte (ne liste que les options de base)\n" " -H, --long-help afficher l'aide longue (ceci) puis quitter" #: src/xz/message.c:1123 msgid "" " -h, --help display this short help and exit\n" " -H, --long-help display the long help (lists also the advanced options)" msgstr "" " -h, --help afficher l'aide courte (ceci) puis quitter\n" " -H, --long-help afficher l'aide longue (liste aussi les options avancées)" #: src/xz/message.c:1128 msgid " -V, --version display the version number and exit" msgstr " -V, --version afficher le numéro de version puis quitter" #: src/xz/message.c:1130 msgid "" "\n" "With no FILE, or when FILE is -, read standard input.\n" msgstr "" "\n" "Sans FILE ou quand FILE est -, lire l'entrée standard.\n" #. TRANSLATORS: This message indicates the bug reporting address #. for this package. Please add _another line_ saying #. "Report translation bugs to <...>\n" with the email or WWW #. address for translation bugs. Thanks. #: src/xz/message.c:1136 #, c-format msgid "Report bugs to <%s> (in English or Finnish).\n" msgstr "" "Signaler les bogues à <%s> (en anglais ou en finnois).\n" "Signaler les bogues de traduction à .\n" #: src/xz/message.c:1138 #, c-format msgid "%s home page: <%s>\n" msgstr "Page du projet %s : <%s>\n" #: src/xz/message.c:1142 msgid "THIS IS A DEVELOPMENT VERSION NOT INTENDED FOR PRODUCTION USE." msgstr "CECI EST UNE VERSION DE DEVELOPPEMENT QUI NE DOIT PAS ÊTRE UTILISEE EN PRODUCTION." #: src/xz/options.c:86 #, c-format msgid "%s: Options must be `name=value' pairs separated with commas" msgstr "%s: Les options doivent être des paires `nom=valeur' séparées par des virgules" #: src/xz/options.c:93 #, c-format msgid "%s: Invalid option name" msgstr "%s : Nom d'option invalide" #: src/xz/options.c:113 #, c-format msgid "%s: Invalid option value" msgstr "%s : Valeur d'option invalide" #: src/xz/options.c:247 #, c-format msgid "Unsupported LZMA1/LZMA2 preset: %s" msgstr "Préréglage LZMA1/LZMA2 non reconnu : %s" #: src/xz/options.c:355 msgid "The sum of lc and lp must not exceed 4" msgstr "La somme de lc et lp ne doit pas dépasser 4" #: src/xz/suffix.c:160 #, c-format msgid "%s: Filename has an unknown suffix, skipping" msgstr "%s : Le fichier a un suffixe inconnu, ignoré" #: src/xz/suffix.c:181 #, c-format msgid "%s: File already has `%s' suffix, skipping" msgstr "%s : Le fichier a déjà le suffixe '%s', ignoré" #: src/xz/suffix.c:388 #, c-format msgid "%s: Invalid filename suffix" msgstr "%s: Suffixe de nom de fichier invalide" #: src/xz/util.c:71 #, c-format msgid "%s: Value is not a non-negative decimal integer" msgstr "%s : La valeur n'est pas un entier décimal non négatif" #: src/xz/util.c:113 #, c-format msgid "%s: Invalid multiplier suffix" msgstr "%s : Suffixe multiplicateur invalide" #: src/xz/util.c:115 msgid "Valid suffixes are `KiB' (2^10), `MiB' (2^20), and `GiB' (2^30)." msgstr "Les suffixes valides sont 'KiB' (2^10), 'MiB' (2^20) et 'GiB' (2^30)." #: src/xz/util.c:132 #, c-format msgid "Value of the option `%s' must be in the range [%, %]" msgstr "La valeur de l'option '%s' doit être inclue entre % et %" #: src/xz/util.c:269 msgid "Compressed data cannot be read from a terminal" msgstr "Les données compressées ne peuvent pas être lues depuis un terminal" #: src/xz/util.c:282 msgid "Compressed data cannot be written to a terminal" msgstr "Les données compressées ne peuvent pas être écrites dans un terminal" #: src/common/tuklib_exit.c:40 msgid "Writing to standard output failed" msgstr "Impossible d'écrire vers la sortie standard" #: src/common/tuklib_exit.c:43 msgid "Unknown error" msgstr "Erreur inconnue" #~ msgid "The selected match finder requires at least nice=%" #~ msgstr "Le `match finder' choisi nécessite au moins nice=%" #~ msgid "Sandbox is disabled due to incompatible command line arguments" #~ msgstr "La sandbox est désactivée car elle est incompatible avec les arguments passés" #~ msgid "Sandbox was successfully enabled" #~ msgstr "La sandboxe a été activée avec succès" #~ msgid "Memory usage limit for compression: " #~ msgstr "Limite d'utilisation pour la compression : " #~ msgid " Streams: %s\n" #~ msgstr " Flux : %s\n" #~ msgid " Blocks: %s\n" #~ msgstr " Blocs : %s\n" #~ msgid " Ratio: %s\n" #~ msgstr " Ratio : %s\n" #~ msgid " Check: %s\n" #~ msgstr " Vérification : %s\n" #~ msgid "" #~ " Streams:\n" #~ " Stream Blocks CompOffset UncompOffset CompSize UncompSize Ratio Check Padding" #~ msgstr "" #~ " Flux :\n" #~ " Flux Blocs PositionComp PositionDécomp TailleComp TailleDécomp Ratio Vérif. Bourrage" #~ msgid "" #~ " Blocks:\n" #~ " Stream Block CompOffset UncompOffset TotalSize UncompSize Ratio Check" #~ msgstr "" #~ " Blocs :\n" #~ " Flux Bloc PositionComp PositionDécomp TailleTot TailleDécomp Ratio Vérif." #~ msgid " CheckVal %*s Header Flags CompSize MemUsage Filters" #~ msgstr " ValVérif %*sEn-tête Drapeaux TailleComp UtilMém Filtres" #~ msgid "Error setting O_NONBLOCK on standard input: %s" #~ msgstr "Impossible d'établir le drapeau O_NONBLOCK sur la sortie standard : %s" #~ msgid "Error setting O_NONBLOCK on standard output: %s" #~ msgstr "Impossible d'activer le drapeau O_NONBLOCK sur la sortie standard : %s"