# Japanese messages for nano # Copyright (C) 2011 Free Software Foundation, Inc. # This file is distributed under the same license as the nano package. # # Yasuaki Taniguchi , 2011. msgid "" msgstr "" "Project-Id-Version: nano 2.3.0\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2016-02-12 00:24-0500\n" "PO-Revision-Date: 2011-07-09 09:01+0900\n" "Last-Translator: Yasuaki Taniguchi \n" "Language-Team: Japanese \n" "Language: ja\n" "X-Bugs: Report translation errors to the Language-Team address.\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=1; plural=0;\n" #. TRANSLATORS: This is a prompt. #: src/browser.c:212 msgid "Go To Directory" msgstr "ディレクトリへ移動" #: src/browser.c:220 src/browser.c:740 src/files.c:1170 src/files.c:2338 #: src/nano.c:1152 src/search.c:204 src/search.c:292 src/search.c:897 #: src/search.c:972 src/text.c:2930 src/text.c:3138 msgid "Cancelled" msgstr "取り消しました" #: src/browser.c:246 src/browser.c:293 #, c-format msgid "Can't go outside of %s in restricted mode" msgstr "制限モードでは %s の外部へ移動できません" #: src/browser.c:257 src/browser.c:303 src/browser.c:324 src/files.c:1040 #: src/files.c:1048 src/files.c:1842 src/files.c:1969 src/files.c:2014 #: src/files.c:2035 src/files.c:2154 src/files.c:3072 src/files.c:3293 #: src/rcfile.c:595 src/rcfile.c:1434 #, c-format msgid "Error reading %s: %s" msgstr "%s: %s の読み込みに失敗しました" #: src/browser.c:283 msgid "Can't move up a directory" msgstr "上位のディレクトリへ移動できません" #. TRANSLATORS: Try to keep this at most 7 characters. #: src/browser.c:617 src/browser.c:625 msgid "(dir)" msgstr "(dir)" #. TRANSLATORS: Try to keep this at most 12 characters. #: src/browser.c:622 msgid "(parent dir)" msgstr "(parent dir)" #. TRANSLATORS: Try to keep this at most 7 characters. #. * If necessary, you can leave out the parentheses. #: src/browser.c:652 msgid "(huge)" msgstr "" #. TRANSLATORS: This is the main search prompt. #: src/browser.c:729 src/search.c:173 msgid "Search" msgstr "検索" #: src/browser.c:779 src/search.c:468 src/search.c:538 msgid "This is the only occurrence" msgstr "他に見つかりません" #: src/browser.c:795 src/search.c:366 msgid "Search Wrapped" msgstr "先頭から検索します" #: src/browser.c:845 src/search.c:519 msgid "No current search pattern" msgstr "検索語が指定されていません" #: src/files.c:50 #, c-format msgid "Directory '%s' does not exist" msgstr "" #: src/files.c:52 #, c-format msgid "Path '%s': %s" msgstr "" #: src/files.c:54 #, fuzzy, c-format #| msgid "\"%s\" is a directory" msgid "Path '%s' is not a directory" msgstr "\"%s\" はディレクトリです" #: src/files.c:57 #, c-format msgid "Path '%s' is not accessible" msgstr "" #. TRANSLATORS: Try to keep this at most 76 characters. #: src/files.c:154 msgid "Warning: Modifying a file which is not locked, check directory permission?" msgstr "" #: src/files.c:193 msgid "Couldn't determine my identity for lock file (getpwuid() failed)" msgstr "" #: src/files.c:202 #, c-format msgid "Couldn't determine hostname for lock file: %s" msgstr "" #: src/files.c:223 src/files.c:234 src/files.c:271 src/files.c:281 #, fuzzy, c-format #| msgid "Error writing backup file %s: %s" msgid "Error writing lock file %s: %s" msgstr "バックアップファイル %s の書き込みエラー: %s" #: src/files.c:301 #, fuzzy, c-format #| msgid "Error writing backup file %s: %s" msgid "Error deleting lock file %s: %s" msgstr "バックアップファイル %s の書き込みエラー: %s" #: src/files.c:337 #, fuzzy, c-format #| msgid "Error writing backup file %s: %s" msgid "Error opening lock file %s: %s" msgstr "バックアップファイル %s の書き込みエラー: %s" #: src/files.c:349 #, c-format msgid "Error reading lock file %s: Not enough data read" msgstr "" #. TRANSLATORS: The second %s is the name of the user, the third that of the editor. #: src/files.c:367 #, c-format msgid "File %s is being edited (by %s with %s, PID %d); continue?" msgstr "" #: src/files.c:422 #, c-format msgid "Can't insert file from outside of %s" msgstr "%s の外部からファイルを挿入できません" #: src/files.c:435 src/files.c:1034 src/rcfile.c:588 src/rcfile.c:1384 #: src/rcfile.c:1425 #, c-format msgid "\"%s\" is a directory" msgstr "\"%s\" はディレクトリです" #: src/files.c:437 #, fuzzy, c-format #| msgid "\"%s\" is a device file" msgid "\"%s\" is not a normal file" msgstr "\"%s\" はデバイスファイルです" #: src/files.c:562 msgid "No more open file buffers" msgstr "ファイルを開くためのバッファがありません" #: src/files.c:578 #, c-format msgid "Switched to %s" msgstr "%s に切り替えます" #: src/files.c:580 src/global.c:988 src/winio.c:2012 msgid "New Buffer" msgstr "新しいバッファ" #: src/files.c:939 #, c-format msgid "Read %lu line (Converted from DOS and Mac format)" msgid_plural "Read %lu lines (Converted from DOS and Mac format)" msgstr[0] "%lu 行を読み込みます(DOS または Mac のフォーマットを変換)" #: src/files.c:944 #, c-format msgid "Read %lu line (Converted from DOS and Mac format - Warning: No write permission)" msgid_plural "Read %lu lines (Converted from DOS and Mac format - Warning: No write permission)" msgstr[0] "%lu 行を読み込みます(DOS または Mac のフォーマットを変換 - 警告: 書き込み権限がありません)" #: src/files.c:950 #, c-format msgid "Read %lu line (Converted from Mac format)" msgid_plural "Read %lu lines (Converted from Mac format)" msgstr[0] "%lu 行を読み込みます(Mac フォーマットを変換)" #: src/files.c:954 #, c-format msgid "Read %lu line (Converted from Mac format - Warning: No write permission)" msgid_plural "Read %lu lines (Converted from Mac format - Warning: No write permission)" msgstr[0] "%lu 行を読み込みます(Mac フォーマットを変換 - 警告: 書き込み権限がありません)" #: src/files.c:960 #, c-format msgid "Read %lu line (Converted from DOS format)" msgid_plural "Read %lu lines (Converted from DOS format)" msgstr[0] "%lu 行を読み込みます(DOS フォーマットを変換)" #: src/files.c:964 #, c-format msgid "Read %lu line (Converted from DOS format - Warning: No write permission)" msgid_plural "Read %lu lines (Converted from DOS format - Warning: No write permission)" msgstr[0] "%lu 行を読み込みます(DOS フォーマットを変換 - 警告: 書き込み権限がありません)" #: src/files.c:970 #, c-format msgid "Read %lu line" msgid_plural "Read %lu lines" msgstr[0] "%lu 行を読み込みます" #: src/files.c:973 #, fuzzy, c-format #| msgid "Read %lu line ( Warning: No write permission)" #| msgid_plural "Read %lu lines (Warning: No write permission)" msgid "Read %lu line (Warning: No write permission)" msgid_plural "Read %lu lines (Warning: No write permission)" msgstr[0] "%lu 行を読み込みます(警告: 書き込み権限がありません)" #: src/files.c:1015 src/files.c:1052 msgid "Reading File" msgstr "ファイルを読み込んでいます" #: src/files.c:1021 msgid "New File" msgstr "新しいファイル" #: src/files.c:1024 #, c-format msgid "\"%s\" not found" msgstr "\"%s\" が見つかりません" #: src/files.c:1035 src/rcfile.c:589 src/rcfile.c:1385 src/rcfile.c:1426 #, c-format msgid "\"%s\" is a device file" msgstr "\"%s\" はデバイスファイルです" #: src/files.c:1129 #, c-format msgid "Command to execute in new buffer [from %s] " msgstr "新しいバッファでコマンドを実行 [from %s] " #: src/files.c:1131 #, c-format msgid "Command to execute [from %s] " msgstr "コマンドを実行 [from %s] " #: src/files.c:1138 #, c-format msgid "File to insert into new buffer [from %s] " msgstr "新しいバッファへファイルを読み込み [from %s] " #: src/files.c:1140 #, c-format msgid "File to insert [from %s] " msgstr "現在のバッファへファイルを読み込み [from %s] " #: src/files.c:1385 msgid "Key invalid in non-multibuffer mode" msgstr "マルチバッファモードでの無効キー" #: src/files.c:1682 msgid "Failed to write backup file, continue saving? (Say N if unsure) " msgstr "バックアップファイルの書き込みに失敗しました。保存を継続しますか? (分からない場合は N としてください) " #: src/files.c:1798 #, c-format msgid "Can't write outside of %s" msgstr "%s の外部から書き込めません" #: src/files.c:1883 src/files.c:1908 src/files.c:1926 src/files.c:1939 #: src/files.c:1950 src/files.c:1979 #, c-format msgid "Error writing backup file %s: %s" msgstr "バックアップファイル %s の書き込みエラー: %s" #: src/files.c:1884 src/nano.c:720 msgid "Too many backup files?" msgstr "バックアップファイルが多すぎませんか?" #: src/files.c:2024 src/text.c:2858 src/text.c:2870 src/text.c:3236 #: src/text.c:3245 #, c-format msgid "Error writing temp file: %s" msgstr "テンポラリファイルの書き込みエラー: %s" #: src/files.c:2047 src/files.c:2066 src/files.c:2078 src/files.c:2102 #: src/files.c:2119 src/files.c:2129 src/files.c:2162 src/files.c:2169 #, c-format msgid "Error writing %s: %s" msgstr "%s の書き込みエラー: %s" #: src/files.c:2198 #, c-format msgid "Wrote %lu line" msgid_plural "Wrote %lu lines" msgstr[0] "%lu 行を書き込みました" #: src/files.c:2297 msgid " [DOS Format]" msgstr " [DOS フォーマット]" #: src/files.c:2298 msgid " [Mac Format]" msgstr " [Mac フォーマット]" #: src/files.c:2300 msgid " [Backup]" msgstr " [バックアップ]" #: src/files.c:2307 msgid "Prepend Selection to File" msgstr "ファイルの先頭に追加" #: src/files.c:2308 msgid "Append Selection to File" msgstr "ファイルの末尾に追加" #: src/files.c:2309 msgid "Write Selection to File" msgstr "ファイルに書き込み" #: src/files.c:2312 msgid "File Name to Prepend to" msgstr "先頭に追加するファイル" #: src/files.c:2313 msgid "File Name to Append to" msgstr "末尾に追加するファイル" #: src/files.c:2314 msgid "File Name to Write" msgstr "書き込むファイル" #: src/files.c:2347 msgid "Save modified buffer anyway ? " msgstr "" #: src/files.c:2455 msgid "File exists, OVERWRITE ? " msgstr "ファイルを上書きしてよいですか? " #: src/files.c:2464 msgid "Save file under DIFFERENT NAME ? " msgstr "違う名前で保存しますか? " #: src/files.c:2478 msgid "File was modified since you opened it, continue saving ? " msgstr "ファイルを開いた後に修正が入りました、保存しますか? " #: src/files.c:2922 msgid "(more)" msgstr "(続き)" #: src/files.c:3014 #, c-format msgid "" "\n" "Press Enter to continue\n" msgstr "" "\n" "継続するために Enter を押してください\n" #: src/files.c:3030 #, fuzzy, c-format #| msgid "" #| "Unable to create directory %s: %s\n" #| "It is required for saving/loading search history or cursor position\n" msgid "" "Unable to create directory %s: %s\n" "It is required for saving/loading search history or cursor positions.\n" msgstr "" "ディレクトリ %s の作成に失敗しました: %s\n" "これは検索履歴およびカーソル位置の保存に必要なディレクトリです。\n" #: src/files.c:3036 #, fuzzy, c-format #| msgid "" #| "Path %s is not a directory and needs to be.\n" #| "Nano will be unable to load or save search or cursor position history\n" msgid "" "Path %s is not a directory and needs to be.\n" "Nano will be unable to load or save search history or cursor positions.\n" msgstr "" "パス %s はディレクトリである必要がありますが、ディレクトリではありません\n" "Nano は検索およびカーソル位置履歴の読み込みと保存ができません。\n" #: src/files.c:3055 #, c-format msgid "" "Detected a legacy nano history file (%s) which I tried to move\n" "to the preferred location (%s) but encountered an error: %s" msgstr "" #: src/files.c:3059 #, c-format msgid "" "Detected a legacy nano history file (%s) which I moved\n" "to the preferred location (%s)\n" "(see the nano FAQ about this change)" msgstr "" #: src/files.c:3142 src/files.c:3150 src/files.c:3174 src/files.c:3184 #, fuzzy, c-format #| msgid "Error writing %s: %s" msgid "Error writing %s: %s\n" msgstr "%s の書き込みエラー: %s" #. TRANSLATORS: Try to keep the next fifteen strings at most 10 characters. #: src/global.c:480 msgid "Exit" msgstr "終了" #: src/global.c:481 msgid "Close" msgstr "閉じる" #: src/global.c:482 #, fuzzy #| msgid "UnCut Text" msgid "Uncut Text" msgstr "貼り付け" #: src/global.c:484 #, fuzzy #| msgid "Justify" msgid "Unjustify" msgstr "両端揃え" #: src/global.c:490 msgid "Read File" msgstr "読み込み" #: src/global.c:491 msgid "Where Is" msgstr "移動" #: src/global.c:492 msgid "Replace" msgstr "置換" #: src/global.c:493 msgid "Go To Line" msgstr "行を指定" #: src/global.c:494 msgid "Prev Line" msgstr "前の行" #: src/global.c:495 msgid "Next Line" msgstr "次の行" #: src/global.c:496 msgid "Prev Page" msgstr "前のページ" #: src/global.c:497 msgid "Next Page" msgstr "次のページ" #: src/global.c:499 msgid "Justify" msgstr "両端揃え" #: src/global.c:500 msgid "FullJstify" msgstr "全て均等化" #: src/global.c:502 msgid "Refresh" msgstr "更新" #. TRANSLATORS: Try to keep this string at most 12 characters. #: src/global.c:505 msgid "WhereIs Next" msgstr "次へ移動" #. TRANSLATORS: The next long series of strings are shortcut descriptions; #. * they are best kept shorter than 56 characters, but may be longer. #: src/global.c:512 msgid "Justify the current paragraph" msgstr "段落を均等化" #: src/global.c:514 msgid "Cancel the current function" msgstr "動作を取り消します" #: src/global.c:515 msgid "Display this help text" msgstr "ヘルプを表示" #: src/global.c:518 msgid "Close the current file buffer / Exit from nano" msgstr "現在のファイルを閉じて nano を終了" #: src/global.c:520 msgid "Exit from nano" msgstr "nano を終了" #: src/global.c:524 msgid "Write the current file to disk" msgstr "現在のファイルをディスクへ書き込み" #: src/global.c:526 msgid "Insert another file into the current one" msgstr "ファイルから読み込み" #: src/global.c:528 msgid "Search for a string or a regular expression" msgstr "正規表現で文字列を検索" #: src/global.c:531 #, fuzzy #| msgid "Search for a string or a regular expression" msgid "Search for a string" msgstr "正規表現で文字列を検索" #: src/global.c:533 #, fuzzy #| msgid "Go to next screen" msgid "Go one screenful up" msgstr "次のページへ移動" #: src/global.c:534 #, fuzzy #| msgid "Go to next screen" msgid "Go one screenful down" msgstr "次のページへ移動" #: src/global.c:536 msgid "Cut the current line and store it in the cutbuffer" msgstr "行の切り取り" #: src/global.c:538 msgid "Uncut from the cutbuffer into the current line" msgstr "貼り付け" #: src/global.c:539 msgid "Display the position of the cursor" msgstr "カーソル位置を表示" #: src/global.c:541 msgid "Invoke the spell checker, if available" msgstr "スペルチェッカを起動 (利用可能な場合)" #: src/global.c:543 msgid "Replace a string or a regular expression" msgstr "正規表現置換" #: src/global.c:544 msgid "Go to line and column number" msgstr "指定位置へ移動" #: src/global.c:546 #, fuzzy #| msgid "Mark text at the cursor position" msgid "Mark text starting from the cursor position" msgstr "現在位置をマーク" #: src/global.c:547 #, fuzzy #| msgid "Repeat last search" msgid "Repeat the last search" msgstr "次を検索" #: src/global.c:549 msgid "Copy the current line and store it in the cutbuffer" msgstr "行のコピー" #: src/global.c:550 msgid "Indent the current line" msgstr "行のインデント" #: src/global.c:551 msgid "Unindent the current line" msgstr "インデントの削除" #: src/global.c:552 msgid "Undo the last operation" msgstr "直前の操作を取り消す (undo)" #: src/global.c:553 msgid "Redo the last undone operation" msgstr "取り消した直前の操作をやり直す (redo)" #: src/global.c:555 msgid "Go back one character" msgstr "前の文字へ戻る" #: src/global.c:556 msgid "Go forward one character" msgstr "次の文字へ進む" #: src/global.c:558 msgid "Go back one word" msgstr "前の単語へ戻る" #: src/global.c:559 msgid "Go forward one word" msgstr "次の単語へ進む" #: src/global.c:561 msgid "Go to previous line" msgstr "前の行へ移動する" #: src/global.c:562 msgid "Go to next line" msgstr "次の行へ移動する" #: src/global.c:563 msgid "Go to beginning of current line" msgstr "現在行の先頭へ移動" #: src/global.c:564 msgid "Go to end of current line" msgstr "現在行の末尾へ移動" #: src/global.c:567 msgid "Go to beginning of paragraph; then of previous paragraph" msgstr "段落の先頭へ移動、カーソルがその位置にある場合その前の段落へ移動" #: src/global.c:569 msgid "Go just beyond end of paragraph; then of next paragraph" msgstr "段落の末尾の次の位置へ移動、カーソルがその位置にある場合その次の段落へ移動" #: src/global.c:571 msgid "Go to the first line of the file" msgstr "ファイルの先頭行へ移動" #: src/global.c:572 msgid "Go to the last line of the file" msgstr "ファイルの最終行へ移動" #: src/global.c:574 msgid "Go to the matching bracket" msgstr "対応する括弧へ移動" #: src/global.c:576 msgid "Scroll up one line without scrolling the cursor" msgstr "カーソル位置を変えずにバッファを一行逆スクロールさせる" #: src/global.c:578 msgid "Scroll down one line without scrolling the cursor" msgstr "カーソル位置を変えずにバッファを一行スクロールさせる" #: src/global.c:581 msgid "Switch to the previous file buffer" msgstr "前のバッファに切替え" #: src/global.c:582 msgid "Switch to the next file buffer" msgstr "次のバッファに切替え" #: src/global.c:584 msgid "Insert the next keystroke verbatim" msgstr "次のキーを逐語的に入力" #: src/global.c:585 msgid "Insert a tab at the cursor position" msgstr "タブ文字の挿入" #: src/global.c:586 msgid "Insert a newline at the cursor position" msgstr "行の挿入" #: src/global.c:587 msgid "Delete the character under the cursor" msgstr "カーソル位置の文字を削除" #: src/global.c:589 msgid "Delete the character to the left of the cursor" msgstr "カーソルの前の文字を削除" #: src/global.c:592 #, fuzzy #| msgid "Cut from cursor to end of line" msgid "Cut backward from cursor to word start" msgstr "行削除時に改行文字を削除しない" #: src/global.c:594 #, fuzzy #| msgid "Cut from cursor to end of line" msgid "Cut forward from cursor to next word start" msgstr "行削除時に改行文字を削除しない" #: src/global.c:596 msgid "Cut from the cursor position to the end of the file" msgstr "カーソル位置からファイル終端までを切り取り" #: src/global.c:599 msgid "Justify the entire file" msgstr "ファイル全体を均等化" #: src/global.c:603 msgid "Count the number of words, lines, and characters" msgstr "単語数、行数、文字数を表示" #: src/global.c:606 msgid "Refresh (redraw) the current screen" msgstr "画面の更新" #: src/global.c:608 #, fuzzy #| msgid "Suspend the editor (if suspend is enabled)" msgid "Suspend the editor (if suspension is enabled)" msgstr "編集を一時中断する (有効な場合)" #: src/global.c:610 msgid "Save file without prompting" msgstr "" #: src/global.c:611 msgid "Search next occurrence backward" msgstr "" #: src/global.c:612 msgid "Search next occurrence forward" msgstr "" #: src/global.c:614 msgid "Toggle the case sensitivity of the search" msgstr "検索時に大文字小文字を区別をするかしないかを切り替える" #: src/global.c:616 msgid "Reverse the direction of the search" msgstr "検索方向の順逆を切り替える" #: src/global.c:620 msgid "Toggle the use of regular expressions" msgstr "正規表現を使用するかしないかを切り替える" #: src/global.c:624 msgid "Recall the previous search/replace string" msgstr "前の検索文字 / 置換文字列を呼び出す" #: src/global.c:626 msgid "Recall the next search/replace string" msgstr "次の検索文字 / 置換文字列を呼び出す" #: src/global.c:629 msgid "Go to file browser" msgstr "ファイルブラウザの起動" #: src/global.c:632 msgid "Toggle the use of DOS format" msgstr "DOS フォーマットに切替え" #: src/global.c:633 msgid "Toggle the use of Mac format" msgstr "Mac フォーマットに切替え" #: src/global.c:634 msgid "Toggle appending" msgstr "ファイル末尾に追加する動作に切り替える" #: src/global.c:635 msgid "Toggle prepending" msgstr "ファイル先頭に追加する動作に切り替える" #: src/global.c:636 msgid "Toggle backing up of the original file" msgstr "元ファイルのバックアップを作成する動作に切り替える" #: src/global.c:637 msgid "Execute external command" msgstr "外部コマンドの実行" #: src/global.c:639 msgid "Close buffer without saving it" msgstr "" #: src/global.c:641 msgid "Toggle the use of a new buffer" msgstr "新しいバッファに切替え" #: src/global.c:644 msgid "Exit from the file browser" msgstr "ファイルブラウザの終了" #: src/global.c:645 msgid "Go to the first file in the list" msgstr "リストの先頭に移動" #: src/global.c:646 msgid "Go to the last file in the list" msgstr "リストの末尾に移動" #: src/global.c:647 msgid "Go to the previous file in the list" msgstr "リストの前のファイルへ移動" #: src/global.c:648 msgid "Go to the next file in the list" msgstr "リストの次のファイルへ移動" #: src/global.c:649 msgid "Go to directory" msgstr "ディレクトリに移動" #: src/global.c:652 #, fuzzy #| msgid "Invoke the spell checker, if available" msgid "Invoke the linter, if available" msgstr "スペルチェッカを起動 (利用可能な場合)" #: src/global.c:653 #, fuzzy #| msgid "Go to previous line" msgid "Go to previous linter msg" msgstr "前の行へ移動する" #: src/global.c:654 #, fuzzy #| msgid "Go to next line" msgid "Go to next linter msg" msgstr "次の行へ移動する" #: src/global.c:656 #, fuzzy #| msgid "Invoke the spell checker, if available" msgid "Invoke formatter, if available" msgstr "スペルチェッカを起動 (利用可能な場合)" #. TRANSLATORS: Try to keep the following strings at most 10 characters. #: src/global.c:671 msgid "Get Help" msgstr "ヘルプ" #: src/global.c:674 src/prompt.c:885 msgid "Cancel" msgstr "取消" #: src/global.c:687 #, fuzzy #| msgid "WriteOut" msgid "Write Out" msgstr "保存" #: src/global.c:723 msgid "Go To Dir" msgstr "ディレクトリに移動" #: src/global.c:738 msgid "Cut Text" msgstr "切り取り" #: src/global.c:753 msgid "To Spell" msgstr "スペル確認" #: src/global.c:757 #, fuzzy #| msgid "Go To Line" msgid "To Linter" msgstr "行を指定" #: src/global.c:760 #, fuzzy #| msgid "DOS Format" msgid "Formatter" msgstr "DOS フォーマット" #: src/global.c:767 msgid "Case Sens" msgstr "大/小文字" #: src/global.c:772 msgid "Regexp" msgstr "正規表現" #: src/global.c:777 msgid "Backwards" msgstr "後方に" #: src/global.c:784 msgid "No Replace" msgstr "置換しない" #: src/global.c:792 msgid "Cur Pos" msgstr "位置" #: src/global.c:807 msgid "First Line" msgstr "先頭行" #: src/global.c:809 msgid "Last Line" msgstr "最終行" #: src/global.c:816 #, fuzzy #| msgid "Not a bracket" msgid "To Bracket" msgstr "大括弧ではありません" #: src/global.c:819 msgid "Mark Text" msgstr "マーク" #: src/global.c:822 msgid "Copy Text" msgstr "コピー" #: src/global.c:825 msgid "Indent Text" msgstr "インデント" #: src/global.c:827 msgid "Unindent Text" msgstr "インデント削除" #: src/global.c:830 msgid "Undo" msgstr "Undo" #: src/global.c:832 msgid "Redo" msgstr "Redo" #: src/global.c:836 src/global.c:842 msgid "Back" msgstr "戻る" #: src/global.c:838 src/global.c:844 msgid "Forward" msgstr "進む" #: src/global.c:849 msgid "Prev Word" msgstr "前の単語" #: src/global.c:851 msgid "Next Word" msgstr "次の単語" #: src/global.c:855 msgid "Home" msgstr "先頭" #: src/global.c:857 msgid "End" msgstr "末尾" #: src/global.c:866 msgid "Beg of Par" msgstr "段落の始点" #: src/global.c:868 msgid "End of Par" msgstr "段落の終点" #: src/global.c:873 msgid "Scroll Up" msgstr "上にスクロール" #: src/global.c:875 msgid "Scroll Down" msgstr "下にスクロール" #: src/global.c:880 #, fuzzy #| msgid "Previous File" msgid "Prev File" msgstr "前のファイル" #: src/global.c:882 msgid "Next File" msgstr "次のファイル" #: src/global.c:891 #, fuzzy #| msgid "Verbatim Input" msgid "Verbatim" msgstr "逐次入力" #: src/global.c:894 msgid "Tab" msgstr "タブ" #: src/global.c:896 msgid "Enter" msgstr "Enter" #: src/global.c:899 msgid "Delete" msgstr "削除" #: src/global.c:901 msgid "Backspace" msgstr "バックスペース" #. TRANSLATORS: The next two strings refer to cutting words. #: src/global.c:912 #, fuzzy #| msgid "Cut Text" msgid "Cut Left" msgstr "切り取り" #: src/global.c:914 msgid "Cut Right" msgstr "" #: src/global.c:916 msgid "CutTillEnd" msgstr "末尾まで切り取り" #: src/global.c:926 msgid "Word Count" msgstr "単語の合計数" #: src/global.c:933 msgid "Suspend" msgstr "" #: src/global.c:937 msgid "Save" msgstr "" #: src/global.c:940 #, fuzzy #| msgid "Previous File" msgid "Previous" msgstr "前のファイル" #: src/global.c:942 #, fuzzy #| msgid "Next Page" msgid "Next" msgstr "次のページ" #: src/global.c:948 msgid "PrevHstory" msgstr "前の履歴" #: src/global.c:951 msgid "NextHstory" msgstr "次の履歴" #: src/global.c:955 msgid "Go To Text" msgstr "検索" #: src/global.c:959 msgid "DOS Format" msgstr "DOS フォーマット" #: src/global.c:961 msgid "Mac Format" msgstr "Mac フォーマット" #: src/global.c:969 msgid "Append" msgstr "末尾に追加" #: src/global.c:971 msgid "Prepend" msgstr "先頭に追加" #: src/global.c:974 msgid "Backup File" msgstr "バックアップ" #: src/global.c:981 msgid "Execute Command" msgstr "コマンドを実行" #: src/global.c:996 msgid "To Files" msgstr "ファイラ" #: src/global.c:1004 msgid "First File" msgstr "先頭へ" #: src/global.c:1006 msgid "Last File" msgstr "末尾へ" #: src/global.c:1010 msgid "Discard buffer" msgstr "" #. TRANSLATORS: Try to keep the next two strings at most 20 characters. #: src/global.c:1020 #, fuzzy #| msgid "Prev Line" msgid "Prev Lint Msg" msgstr "前の行" #: src/global.c:1022 #, fuzzy #| msgid "Next Line" msgid "Next Lint Msg" msgstr "次の行" #. TRANSLATORS: The next seventeen strings are toggle descriptions; #. * they are best kept shorter than 40 characters, but may be longer. #: src/global.c:1285 msgid "Help mode" msgstr "ヘルプ" #: src/global.c:1287 msgid "Constant cursor position display" msgstr "常にカーソル位置を表示" #: src/global.c:1289 msgid "Use of one more line for editing" msgstr "編集用に一行余分に使用する" #: src/global.c:1291 msgid "Smooth scrolling" msgstr "スムーズなスクロール" #: src/global.c:1293 #, fuzzy #| msgid "Don't wrap long lines" msgid "Soft wrapping of overlong lines" msgstr "長い行の折り返しを禁止" #: src/global.c:1295 msgid "Whitespace display" msgstr "空白を表示" #: src/global.c:1297 msgid "Color syntax highlighting" msgstr "単語の強調" #: src/global.c:1299 msgid "Smart home key" msgstr "スマートホームキー" #: src/global.c:1301 msgid "Auto indent" msgstr "自動インデント" #: src/global.c:1303 msgid "Cut to end" msgstr "改行の前まで削除" #: src/global.c:1305 #, fuzzy #| msgid "Don't wrap long lines" msgid "Hard wrapping of overlong lines" msgstr "長い行の折り返しを禁止" #: src/global.c:1307 msgid "Conversion of typed tabs to spaces" msgstr "タブをスペースに変換" #: src/global.c:1309 msgid "Backup files" msgstr "バックアップファイル" #: src/global.c:1311 msgid "Reading file into separate buffer" msgstr "" #: src/global.c:1313 msgid "Mouse support" msgstr "マウスのサポート" #: src/global.c:1315 msgid "No conversion from DOS/Mac format" msgstr "DOS/Mac フォーマットを変換しない" #: src/global.c:1317 msgid "Suspension" msgstr "一時中断" #: src/help.c:211 msgid "" "Search Command Help Text\n" "\n" " Enter the words or characters you would like to search for, and then press Enter. If there is a match for the text you entered, the screen will be updated to the location of the nearest match for the search string.\n" "\n" " The previous search string will be shown in brackets after the search prompt. Hitting Enter without entering any text will perform the previous search. " msgstr "" "検索コマンドのヘルプ\n" "\n" " 検索したい単語か文字を入力してエンターを押してください。もし検索語にマッチするテキストが見つかったならば、カーソルが見つかったテキストの位置へ移動します。\n" "\n" " テキストを検索する方向は検索プロンプトの表示で見分けることができます。検索語を何も入力せずにエンターを押すと、前回の検索語が使用されます。 " #: src/help.c:220 msgid "" "If you have selected text with the mark and then search to replace, only matches in the selected text will be replaced.\n" "\n" " The following function keys are available in Search mode:\n" "\n" msgstr "" "テキストの置換を行う場合は、選択範囲内のテキストに対してのみマッチが行われます。\n" "\n" " 検索モードでは以下のファンクションキーが使用できます。\n" "\n" #: src/help.c:226 msgid "" "Go To Line Help Text\n" "\n" " Enter the line number that you wish to go to and hit Enter. If there are fewer lines of text than the number you entered, you will be brought to the last line of the file.\n" "\n" " The following function keys are available in Go To Line mode:\n" "\n" msgstr "" "指定行へ移動のヘルプ\n" "\n" " 移動した行番号を入力してエンターを押してください。もしテキスト全体の行数よりも大きい数字を入力した場合は、最終行へ移動します。\n" "\n" " 指定行へ移動するモードでは以下のファンクションキーが使用できます。\n" "\n" #: src/help.c:235 msgid "" "Insert File Help Text\n" "\n" " Type in the name of a file to be inserted into the current file buffer at the current cursor location.\n" "\n" " If you have compiled nano with multiple file buffer support, and enable multiple file buffers with the -F or --multibuffer command line flags, the Meta-F toggle, or a nanorc file, inserting a file will cause it to be loaded into a separate buffer (use Meta-< and > to switch between file buffers). " msgstr "" "ファイルからの読み込みのヘルプ\n" "\n" " 読み込むファイル名を入力してください。ファイルは現在のバッファのカーソル位置へ読み込まれます。\n" "\n" " もしnanoがマルチプルバッファのサポートを有効にしてコンパイルされており、-Fまたは--multibufferオプションをつけて実行されているならば、ファイルは別のバッファに読み込まれます(Meta-<とMeta->キーでバッファを切り替えることができます)。 " #: src/help.c:244 msgid "" "If you need another blank buffer, do not enter any filename, or type in a nonexistent filename at the prompt and press Enter.\n" "\n" " The following function keys are available in Insert File mode:\n" "\n" msgstr "" "もし別の空のバッファが必要ならば、ファイル名を入力せずにエンターを押すか、存在しないファイル名を入力してからエンターを押してください。\n" "\n" " ファイルからの読み込みモードでは以下のファンクションキーが使用できます。\n" "\n" #: src/help.c:250 msgid "" "Write File Help Text\n" "\n" " Type the name that you wish to save the current file as and press Enter to save the file.\n" "\n" " If you have selected text with the mark, you will be prompted to save only the selected portion to a separate file. To reduce the chance of overwriting the current file with just a portion of it, the current filename is not the default in this mode.\n" "\n" " The following function keys are available in Write File mode:\n" "\n" msgstr "" "ファイルへの書き込みのヘルプ\n" "\n" " 保存するファイル名を入力してエンターキーを押してください。\n" "\n" " もしテキストを選択した状態であった場合、選択した部分を別のファイルに書き込むことができます。ファイルを上書きしてしまう危険を少なくするため、現在のファイル名がデフォルトで入力されていることはありません。\n" "\n" " ファイルへの書き込みモードでは以下のファンクションキーが使用できます。\n" "\n" #: src/help.c:264 msgid "" "File Browser Help Text\n" "\n" " The file browser is used to visually browse the directory structure to select a file for reading or writing. You may use the arrow keys or Page Up/Down to browse through the files, and S or Enter to choose the selected file or enter the selected directory. To move up one level, select the directory called \"..\" at the top of the file list.\n" "\n" " The following function keys are available in the file browser:\n" "\n" msgstr "" "ファイルブラウザのヘルプ\n" "\n" " ファイルブラウザはディレクトリ構造をビジュアルに表示し、読み込みまたは書き込み対象となるファイルの選択を容易にします。矢印キーかPageUp/Downキーでファイルを選択し、Sキーかエンターキーで決定します。親ディレクトリへ移動したい場合はリストの先頭にある\"..\"を選択してください。\n" "\n" " ファイルブラウザでは以下のファンクションキーが使用できます。\n" "\n" #: src/help.c:277 msgid "" "Browser Search Command Help Text\n" "\n" " Enter the words or characters you would like to search for, and then press Enter. If there is a match for the text you entered, the screen will be updated to the location of the nearest match for the search string.\n" "\n" " The previous search string will be shown in brackets after the search prompt. Hitting Enter without entering any text will perform the previous search.\n" "\n" msgstr "" "検索コマンド(ファイルブラウザ)のヘルプ\n" "\n" " 検索したい文字か単語を入力してエンターキーを押してください。入力にマッチするファイルまたはディレクトリが見つかった場合、該当するファイルまたはディレクトリへカーソルが移動します。\n" "\n" " 検索プロンプトの後の括弧の中には、前回検索された語が表示されています。新たな検索語を入力せずにエンターキーを押すと、再度その語で検索を行います。\n" "\n" #: src/help.c:286 msgid "" " The following function keys are available in Browser Search mode:\n" "\n" msgstr "" " ファイルブラウザの検索コマンドでは以下のファンクションキーが使用できます。\n" "\n" #: src/help.c:290 msgid "" "Browser Go To Directory Help Text\n" "\n" " Enter the name of the directory you would like to browse to.\n" "\n" " If tab completion has not been disabled, you can use the Tab key to (attempt to) automatically complete the directory name.\n" "\n" " The following function keys are available in Browser Go To Directory mode:\n" "\n" msgstr "" "ディレクトリへ移動コマンド(ファイルブラウザ)のヘルプ\n" "\n" " 移動したいディレクトリの名前を入力してエンターキーを押してください。\n" "\n" " Tab補完機能が有効になっているならば、Tabキーを押すことでディレクトリ名を自動的に補完することができます。\n" "\n" " ファイルブラウザのディレクトリへ移動コマンドでは以下のファンクションキーが使用できます。\n" "\n" #: src/help.c:303 msgid "" "Spell Check Help Text\n" "\n" " The spell checker checks the spelling of all text in the current file. When an unknown word is encountered, it is highlighted and a replacement can be edited. It will then prompt to replace every instance of the given misspelled word in the current file, or, if you have selected text with the mark, in the selected text.\n" "\n" " The following function keys are available in Spell Check mode:\n" "\n" msgstr "" "スペルチェックのヘルプ\n" "\n" " スペルチェッカは現在のファイルの中の全ての単語をチェックします。もし未知の単語が見つかったならば、スペルチェッカは該当する部分を強調表示して編集用のプロンプトを表示します。単語を修正してエンターキーを押すと、該当する部分が修正した単語と置き換えられます。もしテキストの一部分を選択した状態であった場合、スペルチェッカは選択範囲内のテキストのみを対象に動作します。\n" "\n" " スペルチェックでは以下のファンクションキーが使用できます。\n" "\n" #: src/help.c:318 msgid "" "Execute Command Help Text\n" "\n" " This mode allows you to insert the output of a command run by the shell into the current buffer (or a new buffer in multiple file buffer mode). If you need another blank buffer, do not enter any command.\n" "\n" " The following function keys are available in Execute Command mode:\n" "\n" msgstr "" "コマンド実行のヘルプ\n" "\n" " このモードでは、シェルから実行されたコマンドの出力を現在のバッファ (もしくは、複数ファイルバッファモードでは新しいバッファ) に挿入することができます。空のバッファが必要な場合は、コマンドを入力しないでください。\n" "\n" " コマンド実行モードでは以下のファンクションキーが使用できます。\n" "\n" #: src/help.c:331 msgid "" "Main nano help text\n" "\n" " The nano editor is designed to emulate the functionality and ease-of-use of the UW Pico text editor. There are four main sections of the editor. The top line shows the program version, the current filename being edited, and whether or not the file has been modified. Next is the main editor window showing the file being edited. The status line is the third line from the bottom and shows important messages. " msgstr "" "nanoのヘルプ\n" "\n" " nanoはワシントン大学で開発されたPicoエディタの機能性と使いやすさを見習って開発されました。nanoの画面には4つのセクションがあり、一番上の行にはnanoのバージョン、編集中のファイル名、最後に保存されてから変更が行われたか否かが表示されています。次にファイルを編集する領域があります。下から三行目はステータス行で、重要なメッセージが表示されます。 " #: src/help.c:341 msgid "" "The bottom two lines show the most commonly used shortcuts in the editor.\n" "\n" " The notation for shortcuts is as follows: Control-key sequences are notated with a caret (^) symbol and can be entered either by using the Control (Ctrl) key or pressing the Escape (Esc) key twice. Escape-key sequences are notated with the Meta (M-) symbol and can be entered using either the Esc, Alt, or Meta key depending on your keyboard setup. " msgstr "" "画面下部の二行には、一般的に使われるショートカットキーが表示されています。\n" "\n" " ショートカットキーの記法は以下の通りです。(^)で表記されているショートカットはCtrlキーを押すか、Escキーを二回続けて押すことを表してします。(M-)で表記されているショートカットはAltキー、Escキーなどのメタキーを押すことを表しています。 " #: src/help.c:350 msgid "" "Also, pressing Esc twice and then typing a three-digit decimal number from 000 to 255 will enter the character with the corresponding value. The following keystrokes are available in the main editor window. Alternative keys are shown in parentheses:\n" "\n" msgstr "" "また、Escキーを二回押した後に000から255までの十進数を入力することで、コードに対応する文字を入力することができます。以下のキーストロークは主なエディタのウィンドウで使用できます。代替のキーストロークは括弧で囲って表記されます。\n" "\n" #: src/help.c:382 src/help.c:459 msgid "enable/disable" msgstr "有効/無効" #: src/nano.c:589 #, fuzzy #| msgid "Key invalid in view mode" msgid "Key is invalid in view mode" msgstr "ビューモードでそのキー入力は無効です" #: src/nano.c:595 #, fuzzy #| msgid "Can't go outside of %s in restricted mode" msgid "This function is disabled in restricted mode" msgstr "制限モードでは %s の外部へ移動できません" #: src/nano.c:603 msgid "Help is not available" msgstr "" #: src/nano.c:714 #, c-format msgid "" "\n" "Buffer written to %s\n" msgstr "" "\n" "バッファを %s へ書き込みました\n" #: src/nano.c:716 #, c-format msgid "" "\n" "Buffer not written to %s: %s\n" msgstr "" "\n" "バッファを書き込めません %s: %s\n" #: src/nano.c:719 #, c-format msgid "" "\n" "Buffer not written: %s\n" msgstr "" "\n" "バッファを %s へ書き込めません\n" #: src/nano.c:744 msgid "Window size is too small for nano...\n" msgstr "ウィンドウのサイズが小さすぎます\n" #: src/nano.c:837 #, c-format msgid "" "Usage: nano [OPTIONS] [[+LINE,COLUMN] FILE]...\n" "\n" msgstr "" "使用法: nano [OPTIONS] [[+LINE,COLUMN] FILE]...\n" "\n" #: src/nano.c:840 #, c-format msgid "Option\t\tGNU long option\t\tMeaning\n" msgstr "オプション\t\tGNUの長い形式のオプション\t\t説明\n" #: src/nano.c:842 #, c-format msgid "Option\t\tMeaning\n" msgstr "オプション\t\t説明\n" #: src/nano.c:845 msgid "+LINE,COLUMN" msgstr "+行,列" #. TRANSLATORS: The next forty or so strings are option descriptions #. * for the --help output. Try to keep them at most 40 characters. #: src/nano.c:848 msgid "Start at line LINE, column COLUMN" msgstr "起動時のカーソル位置 (行,列)" #: src/nano.c:850 msgid "Enable smart home key" msgstr "スマートホームキー有効" #: src/nano.c:852 msgid "Save backups of existing files" msgstr "既存ファイルのバックアップを保存する" #: src/nano.c:853 msgid "-C " msgstr "-C " #: src/nano.c:853 msgid "--backupdir=" msgstr "--backupdir=" #: src/nano.c:854 msgid "Directory for saving unique backup files" msgstr "バックアップファイルを作成するディレクトリ" #: src/nano.c:857 msgid "Use bold instead of reverse video text" msgstr "反転文字を太字で表示" #: src/nano.c:859 msgid "Convert typed tabs to spaces" msgstr "タブをスペースに変換" #: src/nano.c:864 msgid "Read a file into a new buffer by default" msgstr "" #: src/nano.c:867 msgid "Use (vim-style) lock files" msgstr "" #: src/nano.c:872 msgid "Log & read search/replace string history" msgstr "検索/置換した文字列の履歴を記録および読み取り" #: src/nano.c:876 msgid "Don't look at nanorc files" msgstr "nanorc ファイルを参照しない" #: src/nano.c:879 msgid "Fix numeric keypad key confusion problem" msgstr "テンキーパッドの混乱の問題を修正する" #: src/nano.c:881 msgid "Don't add newlines to the ends of files" msgstr "ファイル末尾に空行を追加しない" #: src/nano.c:884 msgid "Don't convert files from DOS/Mac format" msgstr "DOS/Mac フォーマットを変換しない" #: src/nano.c:886 msgid "Use one more line for editing" msgstr "編集エリアを一行広くする" #: src/nano.c:890 msgid "Log & read location of cursor position" msgstr "カーソル位置を記録・読み込みする" #: src/nano.c:893 msgid "-Q " msgstr "-Q " #: src/nano.c:893 msgid "--quotestr=" msgstr "--quotestr=" #: src/nano.c:893 msgid "Quoting string" msgstr "" #: src/nano.c:896 msgid "Restricted mode" msgstr "制限モード" #: src/nano.c:898 msgid "Scroll by line instead of half-screen" msgstr "半画面ずつではなく1行ずつスクロールする" #: src/nano.c:900 msgid "-T <#cols>" msgstr "-T <#cols>" #: src/nano.c:900 msgid "--tabsize=<#cols>" msgstr "--tabsize=<#cols>" #: src/nano.c:901 msgid "Set width of a tab to #cols columns" msgstr "タブ幅を #cols で指定" #: src/nano.c:903 msgid "Do quick statusbar blanking" msgstr "ステータスバーの表示を早く消す" #: src/nano.c:905 msgid "Print version information and exit" msgstr "バージョン情報を表示して終了する" #: src/nano.c:908 msgid "Detect word boundaries more accurately" msgstr "単語の境界を正確に抽出する" #: src/nano.c:912 msgid "-Y " msgstr "-Y " #: src/nano.c:912 msgid "--syntax=" msgstr "--syntax=" #: src/nano.c:913 msgid "Syntax definition to use for coloring" msgstr "表示色を決めるための構文定義" #: src/nano.c:915 msgid "Constantly show cursor position" msgstr "常にカーソル位置を表示" #: src/nano.c:917 msgid "Fix Backspace/Delete confusion problem" msgstr "Del キーをバックスペースとして扱う" #: src/nano.c:918 #, fuzzy #| msgid "Display this help text" msgid "Show this help text and exit" msgstr "ヘルプを表示" #: src/nano.c:920 msgid "Automatically indent new lines" msgstr "改行で自動インデント" #: src/nano.c:921 msgid "Cut from cursor to end of line" msgstr "行削除時に改行文字を削除しない" #: src/nano.c:924 msgid "Enable the use of the mouse" msgstr "マウスを有効にする" #: src/nano.c:926 msgid "Do not read the file (only write it)" msgstr "" #: src/nano.c:928 msgid "-o " msgstr "-o " #: src/nano.c:928 msgid "--operatingdir=" msgstr "--operatingdir=" #: src/nano.c:929 msgid "Set operating directory" msgstr "作業ディレクトリを指定" #: src/nano.c:931 msgid "Preserve XON (^Q) and XOFF (^S) keys" msgstr "XON (^Q) および XOFF (^S) キーを維持する" #: src/nano.c:935 msgid "Silently ignore startup issues like rc file errors" msgstr "rcファイルエラーなど起動時の問題を無視する" #: src/nano.c:938 msgid "-r <#cols>" msgstr "-r <#cols>" #: src/nano.c:938 msgid "--fill=<#cols>" msgstr "--fill=<#cols>" #: src/nano.c:939 #, fuzzy #| msgid "Set wrapping point at column #cols" msgid "Set hard-wrapping point at column #cols" msgstr "折り返し桁数を指定する" #: src/nano.c:943 msgid "-s " msgstr "-s " #: src/nano.c:943 msgid "--speller=" msgstr "--speller=" #: src/nano.c:944 msgid "Enable alternate speller" msgstr "別のスペルチェッカを指定する" #: src/nano.c:946 msgid "Auto save on exit, don't prompt" msgstr "終了時に破棄の問い合わせをしない" #: src/nano.c:948 msgid "Save a file by default in Unix format" msgstr "" #: src/nano.c:950 msgid "View mode (read-only)" msgstr "ビューモード(読み込み専用)" #: src/nano.c:952 #, fuzzy #| msgid "Don't wrap long lines" msgid "Don't hard-wrap long lines" msgstr "長い行の折り返しを禁止" #: src/nano.c:954 msgid "Don't show the two help lines" msgstr "キーのガイドを表示しない" #: src/nano.c:956 msgid "Enable suspension" msgstr "一時中断を有効化する" #: src/nano.c:958 msgid "Enable soft line wrapping" msgstr "穏やかな行の折り返しを有効にする" #: src/nano.c:967 #, fuzzy, c-format #| msgid " GNU nano version %s (compiled %s, %s)\n" msgid " GNU nano, version %s\n" msgstr " GNU nano バージョン %s (コンパイル日時: %s, %s)\n" #: src/nano.c:970 #, c-format msgid " Email: nano@nano-editor.org\tWeb: http://www.nano-editor.org/" msgstr " Email: nano@nano-editor.org\tWeb: http://www.nano-editor.org/" #: src/nano.c:971 #, c-format msgid "" "\n" " Compiled options:" msgstr "" "\n" " コンパイルオプション:" #: src/nano.c:1105 msgid "No file name" msgstr "" #: src/nano.c:1140 msgid "Save modified buffer (ANSWERING \"No\" WILL DESTROY CHANGES) ? " msgstr "変更されたバッファを保存しますか (保存しないと変更は破棄されます)? " #: src/nano.c:1200 msgid "Couldn't reopen stdin from keyboard, sorry\n" msgstr "申し訳ありませんが、キーボードからの標準入力を再オープンできません。\n" #: src/nano.c:1224 #, c-format msgid "Reading from stdin, ^C to abort\n" msgstr "標準入力から読み込んでいます。中止する場合は ^C を入力してください\n" #: src/nano.c:1288 msgid "Received SIGHUP or SIGTERM\n" msgstr "SIGHUP ないし SIGTERM を受信しました\n" #: src/nano.c:1304 #, c-format msgid "Use \"fg\" to return to nano.\n" msgstr "\"fg\" とタイプすることで nano を再開できます。\n" #: src/nano.c:1326 msgid "Suspension is not enabled" msgstr "" #: src/nano.c:1480 msgid "enabled" msgstr "使用する" #: src/nano.c:1480 msgid "disabled" msgstr "使用しない" #: src/nano.c:1639 src/winio.c:1128 msgid "Unknown Command" msgstr "不明なコマンド" #: src/nano.c:1752 msgid "XON ignored, mumble mumble" msgstr "XON は効かないよ・・・ぶつぶつ" #: src/nano.c:1757 msgid "XOFF ignored, mumble mumble" msgstr "XOFF は効かないよ・・・ぶつぶつ" #: src/nano.c:2171 src/rcfile.c:1333 #, c-format msgid "Requested tab size \"%s\" is invalid" msgstr "要求されたタブのサイズ \"%s\" は不正です" #: src/nano.c:2232 src/rcfile.c:1258 #, c-format msgid "Requested fill size \"%s\" is invalid" msgstr "要求されたサイズ \"%s\" は不正です" #: src/nano.c:2279 #, c-format msgid "Type '%s -h' for a list of available options.\n" msgstr "" #. TRANSLATORS: For the next three strings, if possible, specify #. * the single-byte shortcuts for both your language and English. #. * For example, in French: "OoYy" for "Oui". #: src/prompt.c:848 msgid "Yy" msgstr "Yy" #: src/prompt.c:849 msgid "Nn" msgstr "Nn" #: src/prompt.c:850 msgid "Aa" msgstr "Aa" #: src/prompt.c:872 msgid "Yes" msgstr "はい" #: src/prompt.c:877 msgid "All" msgstr "全て" #: src/prompt.c:882 msgid "No" msgstr "いいえ" #: src/rcfile.c:141 #, c-format msgid "Error in %s on line %lu: " msgstr "エラー検出 %s の %lu 行目: " #: src/rcfile.c:200 #, c-format msgid "Argument '%s' has an unterminated \"" msgstr "引数 '%s' は \" で終端していません" #: src/rcfile.c:227 src/rcfile.c:279 src/rcfile.c:731 src/rcfile.c:792 #: src/rcfile.c:881 src/rcfile.c:932 msgid "Regex strings must begin and end with a \" character" msgstr "正規表現文字列は \" で括ってください" #: src/rcfile.c:253 src/search.c:62 #, c-format msgid "Bad regex \"%s\": %s" msgstr "不正な正規表現 \"%s\": %s" #: src/rcfile.c:273 msgid "Missing syntax name" msgstr "構文名がありません" #: src/rcfile.c:344 msgid "The \"none\" syntax is reserved" msgstr "\"none\" 構文は予約語です" #: src/rcfile.c:351 msgid "The \"default\" syntax must take no extensions" msgstr "" #: src/rcfile.c:423 msgid "Missing key name" msgstr "キー名がみつかりません" #: src/rcfile.c:432 src/rcfile.c:443 msgid "Key name is too short" msgstr "" #: src/rcfile.c:453 #, fuzzy #| msgid "keybindings must begin with \"^\", \"M\", or \"F\"" msgid "Key name must begin with \"^\", \"M\", or \"F\"" msgstr "キーバインドは \"^\", \"M\" ないし \"F\" で始めてください" #: src/rcfile.c:456 #, fuzzy, c-format #| msgid "Requested tab size \"%s\" is invalid" msgid "Key name %s is invalid" msgstr "要求されたタブのサイズ \"%s\" は不正です" #: src/rcfile.c:465 #, fuzzy #| msgid "Must specify menu to bind key to (or \"all\")" msgid "Must specify a function to bind the key to" msgstr "キーバインドを有効にするメニューを指定してください (もしくは \"all\" を指定してください)" #. TRANSLATORS: Do not translate the word "all". #: src/rcfile.c:475 msgid "Must specify a menu (or \"all\") in which to bind/unbind the key" msgstr "" #: src/rcfile.c:482 #, fuzzy, c-format #| msgid "Could not map name \"%s\" to a function" msgid "Cannot map name \"%s\" to a function" msgstr "\"%s\" に対応する機能はありません" #: src/rcfile.c:489 #, fuzzy, c-format #| msgid "Could not map name \"%s\" to a menu" msgid "Cannot map name \"%s\" to a menu" msgstr "\"%s\" に対応するメニューはありません" #: src/rcfile.c:521 #, c-format msgid "Function '%s' does not exist in menu '%s'" msgstr "" #: src/rcfile.c:533 #, fuzzy, c-format #| msgid "Sorry, keystr \"%s\" is an illegal binding" msgid "Sorry, keystroke \"%s\" may not be rebound" msgstr "申し訳ありませんが、キー \"%s\" は無効なバインディングです" #: src/rcfile.c:630 #, fuzzy, c-format #| msgid "Error reading %s: %s" msgid "Error expanding %s: %s" msgstr "%s: %s の読み込みに失敗しました" #: src/rcfile.c:673 #, c-format msgid "" "Color \"%s\" not understood.\n" "Valid colors are \"green\", \"red\", \"blue\",\n" "\"white\", \"yellow\", \"cyan\", \"magenta\" and\n" "\"black\", with the optional prefix \"bright\"\n" "for foreground colors." msgstr "" "色\"%s\"はサポートされていません。\n" "前景色に使用できる色は\"green\"、\"red\"\n" "\"blue\"、\"white\"、\"yellow\"、\"cyan\"\n" "\"magenta\"、\"black\"で、それぞれに任意で\n" "接頭語\"bright\"をつけることが出来ます。" #: src/rcfile.c:695 msgid "Cannot add a color command without a syntax command" msgstr "" #: src/rcfile.c:700 msgid "Missing color name" msgstr "色の名前がありません" #: src/rcfile.c:710 src/rcfile.c:871 msgid "Missing regex string" msgstr "正規表現文字列がみつかりません" #: src/rcfile.c:786 msgid "\"start=\" requires a corresponding \"end=\"" msgstr "\"start=\" には対応する \"end=\" が必要です" #: src/rcfile.c:838 #, c-format msgid "Background color \"%s\" cannot be bright" msgstr "背景色 \"%s\" が明るい色ではありません" #: src/rcfile.c:866 msgid "Cannot add a header regex without a syntax command" msgstr "" #: src/rcfile.c:921 msgid "Cannot add a magic string regex without a syntax command" msgstr "" #: src/rcfile.c:926 msgid "Missing magic string name" msgstr "" #: src/rcfile.c:984 msgid "Cannot add a linter without a syntax command" msgstr "" #: src/rcfile.c:989 #, fuzzy #| msgid "Missing color name" msgid "Missing linter command" msgstr "色の名前がありません" #: src/rcfile.c:1010 msgid "Cannot add formatter without a syntax command" msgstr "" #: src/rcfile.c:1015 msgid "Missing formatter command" msgstr "" #: src/rcfile.c:1045 #, fuzzy, c-format #| msgid "Fatal error: no keys mapped for function \"%s\"" msgid "Fatal error: no keys mapped for function \"%s\". Exiting.\n" msgstr "致命的なエラー: \"%s\" の機能に対応するキーがありません" #: src/rcfile.c:1047 #, fuzzy, c-format #| msgid "Exiting. Please use nano with the -I option if needed to adjust your nanorc settings\n" msgid "If needed, use nano with the -I option to adjust your nanorc settings.\n" msgstr "終了します。nanorc の設定を調整する必要がある場合は、 -I オプションを指定して nano を使用してください。\n" #: src/rcfile.c:1108 #, fuzzy, c-format #| msgid "Could not map name \"%s\" to a menu" msgid "Could not find syntax \"%s\" to extend" msgstr "\"%s\" に対応するメニューはありません" #: src/rcfile.c:1124 src/rcfile.c:1133 src/rcfile.c:1143 #, c-format msgid "Command \"%s\" not allowed in included file" msgstr "コマンド \"%s\" はインクルードファイル内では許可されていません" #: src/rcfile.c:1149 src/rcfile.c:1358 #, c-format msgid "Syntax \"%s\" has no color commands" msgstr "構文 \"%s\" は色のコマンドではありません" #: src/rcfile.c:1179 #, c-format msgid "Command \"%s\" not understood" msgstr "コマンド \"%s\" を解釈できません" #: src/rcfile.c:1194 #, fuzzy #| msgid "Missing color name" msgid "Missing option" msgstr "色の名前がありません" #: src/rcfile.c:1216 #, c-format msgid "Option \"%s\" requires an argument" msgstr "オプション \"%s\" には引数が必要です" #: src/rcfile.c:1234 msgid "Option is not a valid multibyte string" msgstr "オプションが有効なマルチバイト文字ではありません" #: src/rcfile.c:1271 src/rcfile.c:1299 src/rcfile.c:1308 msgid "Non-blank characters required" msgstr "非空白類文字が必要です" #: src/rcfile.c:1281 msgid "Two single-column characters required" msgstr "" #: src/rcfile.c:1347 #, fuzzy, c-format #| msgid "Cannot unset flag \"%s\"" msgid "Cannot unset option \"%s\"" msgstr "\"%s\" フラグを解除できません" #: src/rcfile.c:1353 #, fuzzy, c-format #| msgid "Unknown flag \"%s\"" msgid "Unknown option \"%s\"" msgstr "未知のフラグ \"%s\"" #: src/rcfile.c:1412 msgid "I can't find my home directory! Wah!" msgstr "ホームディレクトリが見つかりません" #: src/rcfile.c:1450 #, c-format msgid "" "\n" "Press Enter to continue starting nano.\n" msgstr "" "\n" "エンターキーで開始します\n" #: src/search.c:96 #, c-format msgid "\"%.*s%s\" not found" msgstr "\"%.*s%s\" が見つかりません" #. TRANSLATORS: The next three strings are modifiers of the search prompt. #: src/search.c:176 msgid " [Case Sensitive]" msgstr " [大文字と小文字を区別する]" #: src/search.c:180 msgid " [Regexp]" msgstr " [正規表現]" #: src/search.c:184 msgid " [Backwards]" msgstr " [戻る]" #. TRANSLATORS: The next two strings are modifiers of the search prompt. #: src/search.c:189 msgid " (to replace) in selection" msgstr "" #: src/search.c:191 msgid " (to replace)" msgstr "" #. TRANSLATORS: This is a prompt. #: src/search.c:718 msgid "Replace this instance?" msgstr "" #. TRANSLATORS: This is a prompt. #: src/search.c:885 msgid "Replace with" msgstr "置換候補" #: src/search.c:926 #, c-format msgid "Replaced %lu occurrence" msgid_plural "Replaced %lu occurrences" msgstr[0] "%lu 個置換されました" #. TRANSLATORS: This is a prompt. #: src/search.c:966 msgid "Enter line number, column number" msgstr "行番号と列番号を入力" #: src/search.c:993 msgid "Invalid line or column number" msgstr "無効な行または列番号です" #: src/search.c:1126 msgid "Not a bracket" msgstr "大括弧ではありません" #: src/search.c:1193 msgid "No matching bracket" msgstr "大括弧が一致しません" #: src/text.c:54 msgid "Mark Set" msgstr "マークセット" #: src/text.c:58 msgid "Mark Unset" msgstr "マーク解除" #: src/text.c:70 #, c-format msgid "Error invoking \"%s\"" msgstr "\"%s\" の呼び出しに失敗" #: src/text.c:476 msgid "Nothing in undo buffer!" msgstr "undo バッファに何もありません!" #: src/text.c:482 src/text.c:635 #, fuzzy, c-format #| msgid "Internal error: can't match line %d. Please save your work" msgid "Internal error: can't match line %d. Please save your work." msgstr "内部エラー: 行 %d が一致しません。作業を保存してください" #. TRANSLATORS: Eight of the next nine strings describe actions #. * that are undone or redone. It are all nouns, not verbs. #: src/text.c:496 src/text.c:525 src/text.c:646 src/text.c:687 msgid "text add" msgstr "テキストの追加" #: src/text.c:506 src/text.c:657 msgid "text delete" msgstr "テキストの削除" #: src/text.c:529 src/text.c:695 msgid "line join" msgstr "行の結合" #: src/text.c:548 src/text.c:711 msgid "text cut" msgstr "テキストの切り取り" #: src/text.c:553 src/text.c:715 msgid "text uncut" msgstr "テキストの貼り付け" #: src/text.c:559 src/text.c:692 #, fuzzy #| msgid "Internal error: can't setup uncut. Please save your work." msgid "Internal error: line is missing. Please save your work." msgstr "内部エラー: uncut のセットアップに失敗しました。作業を保存してください" #: src/text.c:562 src/text.c:666 msgid "line break" msgstr "改行" #: src/text.c:570 src/text.c:726 msgid "text insert" msgstr "テキスト挿入" #: src/text.c:591 src/text.c:719 msgid "text replace" msgstr "テキストの置換" #: src/text.c:598 src/text.c:733 src/text.c:1031 src/text.c:1176 msgid "Internal error: unknown type. Please save your work." msgstr "内部エラー: 不明な型です。作業を保存してください。" #: src/text.c:603 #, c-format msgid "Undid action (%s)" msgstr "操作 (%s) を取り消しました" #: src/text.c:620 msgid "Nothing to re-do!" msgstr "やり直す操作はありません!" #: src/text.c:629 #, fuzzy #| msgid "Internal error: can't setup uncut. Please save your work." msgid "Internal error: cannot set up redo. Please save your work." msgstr "内部エラー: uncut のセットアップに失敗しました。作業を保存してください" #: src/text.c:738 #, c-format msgid "Redid action (%s)" msgstr "操作 (%s) をやり直しました" #: src/text.c:827 src/text.c:2503 src/text.c:2939 msgid "Could not create pipe" msgstr "pipe を作成できません" #: src/text.c:853 src/text.c:2590 src/text.c:2745 src/text.c:2987 #: src/text.c:3278 msgid "Could not fork" msgstr "forkできません" #: src/text.c:1855 #, c-format msgid "Bad quote string %s: %s" msgstr "" #: src/text.c:2237 msgid "Can now UnJustify!" msgstr "" #: src/text.c:2430 msgid "Edit a replacement" msgstr "" #: src/text.c:2505 msgid "Creating misspelled word list, please wait..." msgstr "スペルミスのある単語リストを作成しています。しばらくお待ちください..." #: src/text.c:2596 src/text.c:2994 msgid "Could not get size of pipe buffer" msgstr "pipe バッファのサイズを取得できませんでした" #: src/text.c:2647 msgid "Error invoking \"spell\"" msgstr "\"spell\" の呼び出しに失敗" #: src/text.c:2650 msgid "Error invoking \"sort -f\"" msgstr "\"sort -f\" の呼び出しに失敗" #: src/text.c:2653 msgid "Error invoking \"uniq\"" msgstr "\"uniq\" の呼び出しに失敗" #: src/text.c:2876 #, fuzzy #| msgid "Invoke the spell checker, if available" msgid "Invoking spell checker, please wait" msgstr "スペルチェッカを起動 (利用可能な場合)" #: src/text.c:2892 #, c-format msgid "Spell checking failed: %s" msgstr "スペルチェック失敗: %s" #: src/text.c:2894 #, c-format msgid "Spell checking failed: %s: %s" msgstr "スペルチェック失敗: %s: %s" #: src/text.c:2897 msgid "Finished checking spelling" msgstr "スペルチェック完了" #: src/text.c:2922 #, fuzzy #| msgid "Don't add newlines to the ends of files" msgid "No linter defined for this type of file!" msgstr "ファイル末尾に空行を追加しない" #: src/text.c:2927 msgid "Save modified buffer before linting?" msgstr "" #: src/text.c:2944 msgid "Invoking linter, please wait" msgstr "" #: src/text.c:3100 #, c-format msgid "Got 0 parsable lines from command: %s" msgstr "" #: src/text.c:3133 #, c-format msgid "This message is for unopened file %s, open it in a new buffer?" msgstr "" #: src/text.c:3149 msgid "No more errors in unopened files, cancelling" msgstr "" #: src/text.c:3184 #, fuzzy #| msgid "Show this message" msgid "At last message" msgstr "このメッセージを表示" #: src/text.c:3189 #, fuzzy #| msgid "Show this message" msgid "At first message" msgstr "このメッセージを表示" #: src/text.c:3229 msgid "Finished" msgstr "" #: src/text.c:3251 msgid "Invoking formatter, please wait" msgstr "" #: src/text.c:3306 msgid "Finished formatting" msgstr "" #: src/text.c:3388 #, c-format msgid "%sWords: %lu Lines: %ld Chars: %lu" msgstr "%s単語数: %lu 行数: %ld 文字数: %lu" #: src/text.c:3389 msgid "In Selection: " msgstr "選択範囲内: " #. TRANSLATORS: This is displayed when the next keystroke will be #. * inserted verbatim. #: src/text.c:3403 msgid "Verbatim Input" msgstr "逐次入力" #: src/utils.c:391 src/utils.c:403 msgid "nano is out of memory!" msgstr "nano のメモリが足りなくなりました!" #. TRANSLATORS: This is displayed during the input of a #. * six-digit hexadecimal Unicode character code. #: src/winio.c:1429 msgid "Unicode Input" msgstr "ユニコード入力" #: src/winio.c:1993 src/winio.c:1997 msgid "Modified" msgstr "変更済み" #: src/winio.c:1994 msgid "View" msgstr "表示" #: src/winio.c:2008 msgid "DIR:" msgstr "ディレクトリ:" #: src/winio.c:2015 msgid "File:" msgstr "ファイル:" #: src/winio.c:3145 #, c-format msgid "line %ld/%ld (%d%%), col %lu/%lu (%d%%), char %lu/%lu (%d%%)" msgstr "行 %ld/%ld (%d%%), 列 %lu/%lu (%d%%), 文字 %lu/%lu (%d%%)" #: src/winio.c:3275 msgid "The nano text editor" msgstr "nano テキストエディタ" #: src/winio.c:3276 msgid "version" msgstr "バージョン" #: src/winio.c:3277 msgid "Brought to you by:" msgstr "貢献してくれた方々:" #: src/winio.c:3278 msgid "Special thanks to:" msgstr "スペシャルサンクス:" #: src/winio.c:3279 msgid "The Free Software Foundation" msgstr "The Free Software Foundation" #: src/winio.c:3280 msgid "the many translators and the TP" msgstr "" #: src/winio.c:3281 msgid "For ncurses:" msgstr "ncurses に関して:" #: src/winio.c:3282 msgid "and anyone else we forgot..." msgstr "および他のすべての方々..." #: src/winio.c:3283 msgid "Thank you for using nano!" msgstr "nano を使用していただきありがとうございます!" #~ msgid "Cannot prepend or append to a symlink with --nofollow set" #~ msgstr "--nofollow が設定されている状態ではリンク先を変更できません" #~ msgid "Insert File" #~ msgstr "ファイルを挿入" #~ msgid "Go to previous screen" #~ msgstr "前のページへ移動" #~ msgid "Find Other Bracket" #~ msgstr "対応する括弧を探す" #~ msgid "Long line wrapping" #~ msgstr "長い行を折り返す" #~ msgid "Multiple file buffers" #~ msgstr "複数のバッファ" #~ msgid "Enable multiple file buffers" #~ msgstr "複数ファイルバッファ有効" #~ msgid "Don't follow symbolic links, overwrite" #~ msgstr "上書き時にシンボリックリンクを辿らない" #~ msgid "Allow generic undo [EXPERIMENTAL]" #~ msgstr "一般的な undo を許可する [実験的]" #~ msgid "(ignored, for Pico compatibility)" #~ msgstr "(Pico との互換性のためのオプション。無視されます)" #~ msgid "Sorry, support for this function has been disabled" #~ msgstr "その機能は無効です" #~ msgid "Missing flag" #~ msgstr "フラグがみつかりません" #~ msgid "line wrap" #~ msgstr "行の折り返し" #~ msgid "Internal error: unknown type. Please save your work" #~ msgstr "内部エラー: 不明な型です。作業を保存してください" #~ msgid "Internal error: Redo setup failed. Please save your work" #~ msgstr "内部エラー: redo のセットアップに失敗しました。作業を保存してください" #~ msgid "Could not pipe" #~ msgstr "pipe できません"