# Dutch translations for util-linux-ng.
# This file is distributed under the same license as the util-linux-ng package.
#
# block    -> blok
# sector   -> sector
# cylinder -> cilinder
# volume   -> volumen
# (inode blijft onvertaald)
#
# Taco Witte <tcwitte@cs.uu.nl>, 2002, 2003.
# Luk Claes <luk.claes@ugent.be>, 2005.
# Benno Schulenberg <benno@vertaalt.nl>, 2006, 2007, 2008, 2009, 2010.
msgid ""
msgstr ""
"Project-Id-Version: util-linux-ng-2.18-rc2\n"
"Report-Msgid-Bugs-To: Karel Zak <kzak@redhat.com>\n"
"POT-Creation-Date: 2010-06-18 11:27+0200\n"
"PO-Revision-Date: 2010-09-26 20:30+0200\n"
"Last-Translator: Benno Schulenberg <benno@vertaalt.nl>\n"
"Language-Team: Dutch <vertaling@vrijschrift.org>\n"
"X-Bugs: Report translation errors to the Language-Team address.\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Generator: Lokalize 1.0\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"

#: disk-utils/blockdev.c:63
msgid "set read-only"
msgstr "alleen-lezen instellen"

#: disk-utils/blockdev.c:70
msgid "set read-write"
msgstr "lezen-en-schrijven instellen"

#: disk-utils/blockdev.c:76
msgid "get read-only"
msgstr "schrijfstatus tonen"

#: disk-utils/blockdev.c:82
msgid "get logical block (sector) size"
msgstr "logische sectorgrootte tonen"

#: disk-utils/blockdev.c:88
msgid "get physical block (sector) size"
msgstr "fysieke sectorgrootte tonen"

#: disk-utils/blockdev.c:94
msgid "get minimum I/O size"
msgstr "minimale in-/uitvoergrootte tonen"

#: disk-utils/blockdev.c:100
msgid "get optimal I/O size"
msgstr "optimale in-/uitvoergrootte tonen"

#: disk-utils/blockdev.c:106
msgid "get alignment offset"
msgstr "uitlijningspositie tonen"

#: disk-utils/blockdev.c:112
msgid "get max sectors per request"
msgstr "maximum aantal sectoren per verzoek tonen"

#: disk-utils/blockdev.c:118
msgid "get blocksize"
msgstr "blokgrootte tonen"

#: disk-utils/blockdev.c:125
msgid "set blocksize"
msgstr "blokgrootte instellen"

#: disk-utils/blockdev.c:131
msgid "get 32-bit sector count"
msgstr "sectoraantal tonen (32-bits)"

#: disk-utils/blockdev.c:137
msgid "get size in bytes"
msgstr "grootte in bytes tonen"

#: disk-utils/blockdev.c:144
msgid "set readahead"
msgstr "vooruitlezing instellen"

#: disk-utils/blockdev.c:150
msgid "get readahead"
msgstr "vooruitlezing tonen"

#: disk-utils/blockdev.c:157
msgid "set filesystem readahead"
msgstr "vooruitlezing van bestandssysteem instellen"

#: disk-utils/blockdev.c:163
msgid "get filesystem readahead"
msgstr "vooruitlezing van bestandssysteem tonen"

#: disk-utils/blockdev.c:167
msgid "flush buffers"
msgstr "buffers leegmaken"

#: disk-utils/blockdev.c:171
msgid "reread partition table"
msgstr "partitietabel opnieuw inlezen"

#: disk-utils/blockdev.c:179
#, c-format
msgid "Usage:\n"
msgstr "Gebruik:\n"

#: disk-utils/blockdev.c:180
#, c-format
msgid "  %s -V\n"
msgstr "  %s -V\n"

#: disk-utils/blockdev.c:181
#, c-format
msgid "  %s --report [devices]\n"
msgstr "  %s --report [apparaten]\n"

#: disk-utils/blockdev.c:182
#, c-format
msgid "  %s [-v|-q] commands devices\n"
msgstr "  %s [-v|-q] opdrachten apparaten\n"

#: disk-utils/blockdev.c:185
#, c-format
msgid "Available commands:\n"
msgstr "Beschikbare opdrachten:\n"

#: disk-utils/blockdev.c:187
msgid "get size in 512-byte sectors"
msgstr "grootte in 512-byte sectoren tonen"

#: disk-utils/blockdev.c:238 disk-utils/fdformat.c:118
#: disk-utils/fsck.minix.c:1284 disk-utils/isosize.c:181
#: disk-utils/mkfs.bfs.c:114 disk-utils/mkfs.c:52 disk-utils/mkfs.cramfs.c:812
#: disk-utils/mkfs.minix.c:152 disk-utils/mkfs.minix.c:572
#: disk-utils/mkswap.c:473 misc-utils/ddate.c:179 misc-utils/rename.c:79
#: misc-utils/script.c:153 mount/swapon.c:666 mount/swapon.c:718
#: sys-utils/readprofile.c:197 sys-utils/tunelp.c:84
#, c-format
msgid "%s (%s)\n"
msgstr "%s (%s)\n"

#: disk-utils/blockdev.c:321
#, c-format
msgid "%s: Unknown command: %s\n"
msgstr "%s: Onbekende opdracht: %s\n"

#: disk-utils/blockdev.c:338
#, c-format
msgid "%s requires an argument\n"
msgstr "%s vereist een argument\n"

#: disk-utils/blockdev.c:375
#, c-format
msgid "%s failed.\n"
msgstr "'%s' is mislukt.\n"

#: disk-utils/blockdev.c:382
#, c-format
msgid "%s succeeded.\n"
msgstr "%s is voltooid.\n"

#: disk-utils/blockdev.c:427 disk-utils/blockdev.c:455
#, c-format
msgid "%s: cannot open %s\n"
msgstr "%s: kan %s niet openen\n"

#: disk-utils/blockdev.c:472
#, c-format
msgid "%s: ioctl error on %s\n"
msgstr "%s: ioctl()-fout voor %s\n"

#: disk-utils/blockdev.c:481
#, c-format
msgid "RO    RA   SSZ   BSZ   StartSec            Size   Device\n"
msgstr "Stat. RA SecGt BlkGt StartSector        Grootte   Apparaat\n"

#: disk-utils/elvtune.c:48
#, c-format
msgid "usage:\n"
msgstr "Gebruik:\n"

#: disk-utils/elvtune.c:53
#, c-format
msgid "\tNOTE: elvtune only works with 2.4 kernels\n"
msgstr "    Opmerking: 'elvtune' werkt alleen met 2.4 kernels\n"

#: disk-utils/elvtune.c:104
#, c-format
msgid "parse error\n"
msgstr "ontledingsfout\n"

#: disk-utils/elvtune.c:110
#, c-format
msgid "missing blockdevice, use -h for help\n"
msgstr "ontbrekend blok-apparaat; gebruik '-h' voor hulp\n"

#: disk-utils/elvtune.c:131
#, c-format
msgid ""
"\n"
"elvtune is only useful on older kernels;\n"
"for 2.6 use IO scheduler sysfs tunables instead..\n"
msgstr ""
"\n"
"'elvtune' is enkel nuttig op oudere kernels;\n"
"gebruik voor versie 2.6 de IO-scheduler 'sysfs tunables'\n"

#: disk-utils/fdformat.c:31
#, c-format
msgid "Formatting ... "
msgstr "Formatteren... "

#: disk-utils/fdformat.c:49 disk-utils/fdformat.c:86
#, c-format
msgid "done\n"
msgstr "voltooid\n"

#: disk-utils/fdformat.c:60
#, c-format
msgid "Verifying ... "
msgstr "Controleren... "

#: disk-utils/fdformat.c:71
msgid "Read: "
msgstr "Gelezen: "

#: disk-utils/fdformat.c:73
#, c-format
msgid "Problem reading cylinder %d, expected %d, read %d\n"
msgstr "Probleem bij lezen van cilinder %d; verwacht: %d, gelezen: %d\n"

#: disk-utils/fdformat.c:80
#, c-format
msgid ""
"bad data in cyl %d\n"
"Continuing ... "
msgstr ""
"Slechte gegevens in cilinder %d\n"
"Doorgaan... "

#: disk-utils/fdformat.c:96
#, c-format
msgid "usage: %s [ -n ] device\n"
msgstr "Gebruik:  %s [ -n ] apparaat\n"

#: disk-utils/fdformat.c:132
#, c-format
msgid "%s: not a block device\n"
msgstr "%s: is geen blok-apparaat\n"

#: disk-utils/fdformat.c:142
msgid "Could not determine current format type"
msgstr "Kan huidige soort formattering niet bepalen"

#: disk-utils/fdformat.c:143
#, c-format
msgid "%s-sided, %d tracks, %d sec/track. Total capacity %d kB.\n"
msgstr "%szijdig, %d sporen, %d sectoren/spoor.  Totale capaciteit %d kB.\n"

#: disk-utils/fdformat.c:144
msgid "Double"
msgstr "Dubbel"

#: disk-utils/fdformat.c:144
msgid "Single"
msgstr "Enkel"

#: disk-utils/fsck.cramfs.c:117
#, c-format
msgid ""
"usage: %s [-hv] [-x dir] file\n"
" -h         print this help\n"
" -x dir     extract into dir\n"
" -v         be more verbose\n"
" file       file to test\n"
msgstr ""
"Gebruik:  %s [-hv] [-x map] bestand\n"
"\n"
"  -h        deze hulptekst tonen\n"
"  -v        meer informatie weergeven\n"
"  -x map    uitpakken in deze map\n"
"  bestand   te testen bestand\n"

#: disk-utils/fsck.cramfs.c:163
#, c-format
msgid "stat failed: %s"
msgstr "status opvragen is mislukt: %s"

#: disk-utils/fsck.cramfs.c:167 disk-utils/fsck.cramfs.c:551
#, c-format
msgid "open failed: %s"
msgstr "openen is mislukt: %s"

#: disk-utils/fsck.cramfs.c:172
#, c-format
msgid "ioctl failed: unable to determine device size: %s"
msgstr "ioctl() is mislukt: kan grootte van apparaat niet bepalen: %s"

#: disk-utils/fsck.cramfs.c:180
#, c-format
msgid "not a block device or file: %s"
msgstr "is geen blok-apparaat noch bestand: %s"

#: disk-utils/fsck.cramfs.c:184 disk-utils/fsck.cramfs.c:226
msgid "file length too short"
msgstr "bestandslengte is te klein"

#: disk-utils/fsck.cramfs.c:189 disk-utils/fsck.cramfs.c:197
#: disk-utils/fsck.cramfs.c:258 disk-utils/fsck.cramfs.c:278
#, c-format
msgid "read failed: %s"
msgstr "lezen is mislukt: %s"

#: disk-utils/fsck.cramfs.c:207
msgid "superblock magic not found"
msgstr "geen magisch getal van superblok gevonden"

#: disk-utils/fsck.cramfs.c:216
msgid "unsupported filesystem features"
msgstr "niet-ondersteunde bestandssysteemfuncties"

#: disk-utils/fsck.cramfs.c:219
#, c-format
msgid "superblock size (%d) too small"
msgstr "grootte (%d) van superblok is te klein"

#: disk-utils/fsck.cramfs.c:223
msgid "zero file count"
msgstr "nul bestanden geteld"

#: disk-utils/fsck.cramfs.c:229
#, c-format
msgid "warning: file extends past end of filesystem\n"
msgstr "Waarschuwing: bestand loopt door tot voorbij het einde van het bestandssysteem\n"

#: disk-utils/fsck.cramfs.c:233
#, c-format
msgid "warning: old cramfs format\n"
msgstr "Waarschuwing: oude cramfs-indeling\n"

#: disk-utils/fsck.cramfs.c:246
msgid "unable to test CRC: old cramfs format"
msgstr "kan controlesom niet testen: oude cramfs-indeling"

#: disk-utils/fsck.cramfs.c:272 disk-utils/fsck.cramfs.c:339
#: disk-utils/fsck.cramfs.c:477 login-utils/chfn.c:529 login-utils/chsh.c:439
#: misc-utils/wipefs.c:143 schedutils/taskset.c:127 sys-utils/cytune.c:321
msgid "malloc failed"
msgstr "malloc() is mislukt"

#: disk-utils/fsck.cramfs.c:297
msgid "crc error"
msgstr "foutieve controlesom"

#: disk-utils/fsck.cramfs.c:364
msgid "root inode is not directory"
msgstr "hoofd-inode is geen map"

#: disk-utils/fsck.cramfs.c:369
#, c-format
msgid "bad root offset (%lu)"
msgstr "foutieve positie (%lu) van hoofdmap"

#: disk-utils/fsck.cramfs.c:387
msgid "data block too large"
msgstr "datablok is te groot"

#: disk-utils/fsck.cramfs.c:391
#, c-format
msgid "decompression error %p(%d): %s"
msgstr "decompressiefout %p(%d): %s"

#: disk-utils/fsck.cramfs.c:415
#, c-format
msgid "  hole at %ld (%zd)\n"
msgstr "  gat op %ld (%zd)\n"

#: disk-utils/fsck.cramfs.c:423 disk-utils/fsck.cramfs.c:595
#, c-format
msgid "  uncompressing block at %ld to %ld (%ld)\n"
msgstr "  decromprimeren van blok op %ld naar %ld (%ld)\n"

#: disk-utils/fsck.cramfs.c:429
#, c-format
msgid "non-block (%ld) bytes"
msgstr "geen blok (%ld bytes)"

#: disk-utils/fsck.cramfs.c:433
#, c-format
msgid "non-size (%ld vs %ld) bytes"
msgstr "onjuiste grootte (%ld ipv %ld bytes)"

#: disk-utils/fsck.cramfs.c:439
#, c-format
msgid "write failed: %s"
msgstr "schrijven is mislukt: %s"

#: disk-utils/fsck.cramfs.c:452
#, c-format
msgid "lchown failed: %s"
msgstr "'lchown' is mislukt: %s"

#: disk-utils/fsck.cramfs.c:458
#, c-format
msgid "chown failed: %s"
msgstr "'chown' is mislukt: %s"

#: disk-utils/fsck.cramfs.c:465
#, c-format
msgid "utime failed: %s"
msgstr "'utime' is mislukt: %s"

#: disk-utils/fsck.cramfs.c:480
#, c-format
msgid "directory inode has zero offset and non-zero size: %s"
msgstr "positie nul en niet-nul grootte van inode van map: %s"

#: disk-utils/fsck.cramfs.c:494
#, c-format
msgid "mkdir failed: %s"
msgstr "'mkdir' is mislukt: %s"

#: disk-utils/fsck.cramfs.c:511
msgid "filename length is zero"
msgstr "lengte van bestandsnaam is nul"

#: disk-utils/fsck.cramfs.c:514
msgid "bad filename length"
msgstr "ongeldige lengte van bestandsnaam "

#: disk-utils/fsck.cramfs.c:521
msgid "bad inode offset"
msgstr "ongeldige inode-positie"

#: disk-utils/fsck.cramfs.c:537
msgid "file inode has zero offset and non-zero size"
msgstr "bestands-inode heeft positie nul en niet-nul grootte"

#: disk-utils/fsck.cramfs.c:540
msgid "file inode has zero size and non-zero offset"
msgstr "bestands-inode heeft grootte nul en niet-nul positie"

#: disk-utils/fsck.cramfs.c:571
msgid "symbolic link has zero offset"
msgstr "symbolische koppeling heeft positie nul"

#: disk-utils/fsck.cramfs.c:574
msgid "symbolic link has zero size"
msgstr "symbolische koppeling heeft grootte nul"

#: disk-utils/fsck.cramfs.c:586
#, c-format
msgid "size error in symlink: %s"
msgstr "foutieve grootte in symbolische koppeling: %s"

#: disk-utils/fsck.cramfs.c:601
#, c-format
msgid "symlink failed: %s"
msgstr "symbolische koppeling is mislukt: %s"

#: disk-utils/fsck.cramfs.c:613
#, c-format
msgid "special file has non-zero offset: %s"
msgstr "speciaal bestand heeft niet-nul positie: %s"

#: disk-utils/fsck.cramfs.c:625
#, c-format
msgid "fifo has non-zero size: %s"
msgstr "fifo heeft niet lengte nul: %s"

#: disk-utils/fsck.cramfs.c:631
#, c-format
msgid "socket has non-zero size: %s"
msgstr "socket heeft niet lengte nul: %s"

#: disk-utils/fsck.cramfs.c:636
#, c-format
msgid "bogus mode: %s (%o)"
msgstr "ongeldige modus: %s (%o)"

#: disk-utils/fsck.cramfs.c:646
#, c-format
msgid "mknod failed: %s"
msgstr "'mknod' is mislukt: %s"

#: disk-utils/fsck.cramfs.c:682
#, c-format
msgid "directory data start (%ld) < sizeof(struct cramfs_super) + start (%ld)"
msgstr "begin van mapdata (%ld) is kleiner dan sizeof(struct cramfs_super) plus start (%ld)"

#: disk-utils/fsck.cramfs.c:685
#, c-format
msgid "directory data end (%ld) != file data start (%ld)"
msgstr "einde van mapdata (%ld) is ongelijk aan begin van bestandsdata (%ld)"

#: disk-utils/fsck.cramfs.c:690
msgid "invalid file data offset"
msgstr "ongeldige positie van bestandsgegevens"

#: disk-utils/fsck.cramfs.c:714
msgid "failed to allocate outbuffer"
msgstr "reserveren van uitvoerbuffer is mislukt"

#: disk-utils/fsck.cramfs.c:727
msgid "compiled without -x support"
msgstr "gecompileerd zonder ondersteuning voor '-x'"

#: disk-utils/fsck.minix.c:207
#, c-format
msgid "Usage: %s [-larvsmf] /dev/name\n"
msgstr "Gebruik:  %s [-larvsmf] /dev/naam\n"

#: disk-utils/fsck.minix.c:323
#, c-format
msgid "%s is mounted.\t "
msgstr "%s is aangekoppeld.\t "

#: disk-utils/fsck.minix.c:325
msgid "Do you really want to continue"
msgstr "Wilt u echt doorgaan"

#: disk-utils/fsck.minix.c:329
#, c-format
msgid "check aborted.\n"
msgstr "De controle is afgebroken.\n"

#: disk-utils/fsck.minix.c:348 disk-utils/fsck.minix.c:371
#, c-format
msgid "Zone nr < FIRSTZONE in file `%s'."
msgstr "Zonenummer < EERSTEZONE in bestand '%s'."

#: disk-utils/fsck.minix.c:352 disk-utils/fsck.minix.c:375
#, c-format
msgid "Zone nr >= ZONES in file `%s'."
msgstr "Zonenummer >= ZONES in bestand '%s'."

#: disk-utils/fsck.minix.c:357 disk-utils/fsck.minix.c:380
msgid "Remove block"
msgstr "Blok verwijderen"

#: disk-utils/fsck.minix.c:398
#, c-format
msgid "Read error: unable to seek to block in file '%s'\n"
msgstr "Leesfout: kan geen 'seek' doen naar blok in bestand '%s'\n"

#: disk-utils/fsck.minix.c:404
#, c-format
msgid "Read error: bad block in file '%s'\n"
msgstr "Leesfout: slecht blok in bestand '%s'\n"

#: disk-utils/fsck.minix.c:419
#, c-format
msgid ""
"Internal error: trying to write bad block\n"
"Write request ignored\n"
msgstr ""
"*Interne fout*: poging tot schrijven naar een slecht blok.\n"
"Schrijfverzoek is genegeerd.\n"

#: disk-utils/fsck.minix.c:425 disk-utils/mkfs.minix.c:207
msgid "seek failed in write_block"
msgstr "'seek' is mislukt in write_block()"

#: disk-utils/fsck.minix.c:428
#, c-format
msgid "Write error: bad block in file '%s'\n"
msgstr "Schrijffout: slecht blok in bestand '%s'\n"

#: disk-utils/fsck.minix.c:544
msgid "seek failed in write_super_block"
msgstr "'seek' is mislukt in write_super_block()"

#: disk-utils/fsck.minix.c:546 disk-utils/mkfs.minix.c:194
msgid "unable to write super-block"
msgstr "kan superblok niet schrijven"

#: disk-utils/fsck.minix.c:556
msgid "Unable to write inode map"
msgstr "kan inode-kaart niet schrijven"

#: disk-utils/fsck.minix.c:558
msgid "Unable to write zone map"
msgstr "kan zone-kaart niet schrijven"

#: disk-utils/fsck.minix.c:560
msgid "Unable to write inodes"
msgstr "kan inodes niet schrijven"

#: disk-utils/fsck.minix.c:587
msgid "seek failed"
msgstr "'seek' is mislukt"

#: disk-utils/fsck.minix.c:591 disk-utils/mkfs.minix.c:399
msgid "unable to alloc buffer for superblock"
msgstr "reserveren van buffer voor superblok is mislukt"

#: disk-utils/fsck.minix.c:594
msgid "unable to read super block"
msgstr "kan superblok niet lezen"

#: disk-utils/fsck.minix.c:612
msgid "bad magic number in super-block"
msgstr "ongeldig magisch getal in superblok"

#: disk-utils/fsck.minix.c:614
msgid "Only 1k blocks/zones supported"
msgstr "Alleen blokken/zones van 1K zijn mogelijk"

#: disk-utils/fsck.minix.c:616
msgid "bad s_imap_blocks field in super-block"
msgstr "ongeldig 's_imap_blocks'-veld in superblok"

#: disk-utils/fsck.minix.c:618
msgid "bad s_zmap_blocks field in super-block"
msgstr "ongeldig 's_zmap_blocks'-veld in superblok"

#: disk-utils/fsck.minix.c:625
msgid "Unable to allocate buffer for inode map"
msgstr "Kan geen buffer reserveren voor inode-kaart"

#: disk-utils/fsck.minix.c:628
msgid "Unable to allocate buffer for zone map"
msgstr "Kan geen buffer reserveren voor zone-kaart"

#: disk-utils/fsck.minix.c:633
msgid "Unable to allocate buffer for inodes"
msgstr "Kan geen buffer reserveren voor inodes"

#: disk-utils/fsck.minix.c:636
msgid "Unable to allocate buffer for inode count"
msgstr "Kan geen buffer reserveren voor inode-aantal"

#: disk-utils/fsck.minix.c:639
msgid "Unable to allocate buffer for zone count"
msgstr "Kan geen buffer reserveren voor zone-aantal"

#: disk-utils/fsck.minix.c:641
msgid "Unable to read inode map"
msgstr "Kan inode-kaart niet lezen"

#: disk-utils/fsck.minix.c:643
msgid "Unable to read zone map"
msgstr "Kan zone-kaart niet lezen"

#: disk-utils/fsck.minix.c:645
msgid "Unable to read inodes"
msgstr "Kan inodes niet lezen"

#: disk-utils/fsck.minix.c:647
#, c-format
msgid "Warning: Firstzone != Norm_firstzone\n"
msgstr "Waarschuwing: EersteZone != NormaleEersteZone\n"

#: disk-utils/fsck.minix.c:652 disk-utils/mkfs.minix.c:451
#, c-format
msgid "%ld inodes\n"
msgstr "%ld inodes\n"

#: disk-utils/fsck.minix.c:653 disk-utils/mkfs.minix.c:452
#, c-format
msgid "%ld blocks\n"
msgstr "%ld blokken\n"

#: disk-utils/fsck.minix.c:654 disk-utils/mkfs.minix.c:453
#, c-format
msgid "Firstdatazone=%ld (%ld)\n"
msgstr "EersteGegevensZone=%ld (%ld)\n"

#: disk-utils/fsck.minix.c:655 disk-utils/mkfs.minix.c:454
#, c-format
msgid "Zonesize=%d\n"
msgstr "ZoneGrootte=%d\n"

#: disk-utils/fsck.minix.c:656
#, c-format
msgid "Maxsize=%ld\n"
msgstr "MaxGrootte=%ld\n"

#: disk-utils/fsck.minix.c:657
#, c-format
msgid "Filesystem state=%d\n"
msgstr "Bestandssysteemstatus=%d\n"

#: disk-utils/fsck.minix.c:658
#, c-format
msgid ""
"namelen=%d\n"
"\n"
msgstr ""
"naamlengte=%d\n"
"\n"

#: disk-utils/fsck.minix.c:673 disk-utils/fsck.minix.c:724
#, c-format
msgid "Inode %d marked unused, but used for file '%s'\n"
msgstr "Inode %d is gemarkeerd als ongebruikt, maar wordt gebruikt door bestand '%s'.\n"

#: disk-utils/fsck.minix.c:677 disk-utils/fsck.minix.c:728
msgid "Mark in use"
msgstr "Markeren als gebruikt"

#: disk-utils/fsck.minix.c:699 disk-utils/fsck.minix.c:748
#, c-format
msgid "The file `%s' has mode %05o\n"
msgstr "Het bestand '%s' heeft modus %05o\n"

#: disk-utils/fsck.minix.c:706 disk-utils/fsck.minix.c:754
#, c-format
msgid "Warning: inode count too big.\n"
msgstr "Waarschuwing: het aantal inodes is te groot.\n"

#: disk-utils/fsck.minix.c:766 disk-utils/fsck.minix.c:774
msgid "root inode isn't a directory"
msgstr "hoofd-inode is geen map"

#: disk-utils/fsck.minix.c:788 disk-utils/fsck.minix.c:821
#, c-format
msgid "Block has been used before. Now in file `%s'."
msgstr "Blok is al eerder gebruikt.  Nu in bestand '%s'."

#: disk-utils/fsck.minix.c:790 disk-utils/fsck.minix.c:823
#: disk-utils/fsck.minix.c:1146 disk-utils/fsck.minix.c:1155
#: disk-utils/fsck.minix.c:1201 disk-utils/fsck.minix.c:1210
msgid "Clear"
msgstr "Wissen"

#: disk-utils/fsck.minix.c:800 disk-utils/fsck.minix.c:833
#, c-format
msgid "Block %d in file `%s' is marked not in use."
msgstr "Blok %d in bestand '%s' is gemarkeerd als ongebruikt."

#: disk-utils/fsck.minix.c:802 disk-utils/fsck.minix.c:835
msgid "Correct"
msgstr "Corrigeren"

#: disk-utils/fsck.minix.c:974 disk-utils/fsck.minix.c:1041
#, c-format
msgid "The directory '%s' contains a bad inode number for file '%.*s'."
msgstr "De map '%s' bevat een ongeldig inode-nummer voor bestand '%.*s'."

#: disk-utils/fsck.minix.c:977 disk-utils/fsck.minix.c:1044
msgid " Remove"
msgstr " Verwijderen"

#: disk-utils/fsck.minix.c:991 disk-utils/fsck.minix.c:1058
#, c-format
msgid "%s: bad directory: '.' isn't first\n"
msgstr "%s: ongeldige map: '.' is niet eerste\n"

#: disk-utils/fsck.minix.c:999 disk-utils/fsck.minix.c:1067
#, c-format
msgid "%s: bad directory: '..' isn't second\n"
msgstr "%s: ongeldige map: '..' is niet tweede\n"

#: disk-utils/fsck.minix.c:1101 disk-utils/fsck.minix.c:1119
msgid "internal error"
msgstr "**interne fout**"

#: disk-utils/fsck.minix.c:1104 disk-utils/fsck.minix.c:1122
#, c-format
msgid "%s: bad directory: size < 32"
msgstr "%s: ongeldige map: grootte < 32"

#: disk-utils/fsck.minix.c:1135
msgid "seek failed in bad_zone"
msgstr "'seek' is mislukt in bad_zone()"

#: disk-utils/fsck.minix.c:1145 disk-utils/fsck.minix.c:1200
#, c-format
msgid "Inode %d mode not cleared."
msgstr "Inode %d-modus is niet gewist."

#: disk-utils/fsck.minix.c:1154 disk-utils/fsck.minix.c:1209
#, c-format
msgid "Inode %d not used, marked used in the bitmap."
msgstr "Inode %d is ongebruikt, maar gemarkeerd als gebruikt in de bitkaart."

#: disk-utils/fsck.minix.c:1160 disk-utils/fsck.minix.c:1215
#, c-format
msgid "Inode %d used, marked unused in the bitmap."
msgstr "Inode %d is gebruikt, maar niet als zodanig gemarkeerd in de bitkaart."

#: disk-utils/fsck.minix.c:1162 disk-utils/fsck.minix.c:1216
msgid "Set"
msgstr "Markeren"

#: disk-utils/fsck.minix.c:1166 disk-utils/fsck.minix.c:1220
#, c-format
msgid "Inode %d (mode = %07o), i_nlinks=%d, counted=%d."
msgstr "Inode %d (modus = %07o), i_nlinks=%d, geteld=%d."

#: disk-utils/fsck.minix.c:1168 disk-utils/fsck.minix.c:1222
msgid "Set i_nlinks to count"
msgstr "i_nlinks op geteld aantal instellen"

#: disk-utils/fsck.minix.c:1180 disk-utils/fsck.minix.c:1234
#, c-format
msgid "Zone %d: marked in use, no file uses it."
msgstr "Zone %d is gemarkeerd als in gebruik, maar geen bestand gebruikt het."

#: disk-utils/fsck.minix.c:1181 disk-utils/fsck.minix.c:1236
msgid "Unmark"
msgstr "Markering verwijderen"

#: disk-utils/fsck.minix.c:1186 disk-utils/fsck.minix.c:1241
#, c-format
msgid "Zone %d: in use, counted=%d\n"
msgstr "Zone %d: in gebruik, geteld=%d\n"

#: disk-utils/fsck.minix.c:1189 disk-utils/fsck.minix.c:1244
#, c-format
msgid "Zone %d: not in use, counted=%d\n"
msgstr "Zone %d: niet in gebruik, geteld=%d\n"

#: disk-utils/fsck.minix.c:1289 disk-utils/mkfs.minix.c:577
#: disk-utils/mkfs.minix.c:579
msgid "bad inode size"
msgstr "ongeldige inode-grootte"

#: disk-utils/fsck.minix.c:1291
msgid "bad v2 inode size"
msgstr "ongeldige v2-inode-grootte"

#: disk-utils/fsck.minix.c:1317
msgid "need terminal for interactive repairs"
msgstr "voor interactieve reparaties is een terminal vereist"

#: disk-utils/fsck.minix.c:1321
#, c-format
msgid "unable to open '%s': %s"
msgstr "kan '%s' niet openen: %s"

#: disk-utils/fsck.minix.c:1336
#, c-format
msgid "%s is clean, no check.\n"
msgstr "%s is schoon, geen controle.\n"

#: disk-utils/fsck.minix.c:1340
#, c-format
msgid "Forcing filesystem check on %s.\n"
msgstr "Gedwongen bestandssysteemcontrole van %s.\n"

#: disk-utils/fsck.minix.c:1342
#, c-format
msgid "Filesystem on %s is dirty, needs checking.\n"
msgstr "Bestandssysteem op %s is vervuild, een controle is nodig.\n"

#: disk-utils/fsck.minix.c:1375
#, c-format
msgid ""
"\n"
"%6ld inodes used (%ld%%)\n"
msgstr ""
"\n"
"%6ld inodes gebruikt (%ld%%)\n"

#: disk-utils/fsck.minix.c:1380
#, c-format
msgid "%6ld zones used (%ld%%)\n"
msgstr "%6ld zones gebruikt (%ld%%)\n"

#: disk-utils/fsck.minix.c:1382
#, c-format
msgid ""
"\n"
"%6d regular files\n"
"%6d directories\n"
"%6d character device files\n"
"%6d block device files\n"
"%6d links\n"
"%6d symbolic links\n"
"------\n"
"%6d files\n"
msgstr ""
"\n"
"%6d gewone bestanden\n"
"%6d mappen\n"
"%6d byte-apparaten\n"
"%6d blok-apparaten\n"
"%6d koppelingen\n"
"%6d symbolische koppelingen\n"
"------\n"
"%6d bestanden\n"

#: disk-utils/fsck.minix.c:1395
#, c-format
msgid ""
"----------------------------\n"
"FILE SYSTEM HAS BEEN CHANGED\n"
"----------------------------\n"
msgstr ""
"----------------------------\n"
"BESTANDSSYSTEEM IS VERANDERD\n"
"----------------------------\n"

#: disk-utils/isosize.c:129
#, c-format
msgid "%s: failed to open: %s\n"
msgstr "%s: openen is mislukt: %s\n"

#: disk-utils/isosize.c:135
#, c-format
msgid "%s: seek error on %s\n"
msgstr "%s: 'seek'-fout op %s\n"

#: disk-utils/isosize.c:141
#, c-format
msgid "%s: read error on %s\n"
msgstr "%s: leesfout op %s\n"

#: disk-utils/isosize.c:150
#, c-format
msgid "sector count: %d, sector size: %d\n"
msgstr "aantal sectoren: %d, sectorgrootte: %d\n"

#: disk-utils/isosize.c:200
#, c-format
msgid "%s: option parse error\n"
msgstr "%s: optie-ontledingsfout\n"

#: disk-utils/isosize.c:208
#, c-format
msgid "Usage: %s [-x] [-d <num>] iso9660-image\n"
msgstr "Gebruik:  %s [-x] [-d <getal>] iso9660-afbeelding\n"

#: disk-utils/mkfs.bfs.c:83
#, c-format
msgid ""
"Usage: %s [-v] [-N nr-of-inodes] [-V volume-name]\n"
"       [-F fsname] device [block-count]\n"
msgstr ""
"Gebruik:  %s [-v] [-N aantal_inodes] [-V volumennaam]\n"
"          [-F bestandssysteemnaam] apparaat [aantal_blokken]\n"

#: disk-utils/mkfs.bfs.c:130
msgid "volume name too long"
msgstr "volumennaam is te lang"

#: disk-utils/mkfs.bfs.c:137
msgid "fsname name too long"
msgstr "bestandssysteemnaam is te lang"

#: disk-utils/mkfs.bfs.c:162
#, c-format
msgid "cannot stat device %s"
msgstr "kan apparaat %s niet vinden"

#: disk-utils/mkfs.bfs.c:166
#, c-format
msgid "%s is not a block special device"
msgstr "%s is geen blok-apparaat"

#: disk-utils/mkfs.bfs.c:171 sys-utils/ldattach.c:270
#, c-format
msgid "cannot open %s"
msgstr "kan %s niet openen"

#: disk-utils/mkfs.bfs.c:182
#, c-format
msgid "cannot get size of %s"
msgstr "kan grootte van %s niet bepalen"

#: disk-utils/mkfs.bfs.c:187
#, c-format
msgid "blocks argument too large, max is %llu"
msgstr "argument voor blokken is te groot -- maximum is %llu"

#: disk-utils/mkfs.bfs.c:202
msgid "too many inodes - max is 512"
msgstr "te veel inodes -- maximum is 512"

#: disk-utils/mkfs.bfs.c:211
#, c-format
msgid "not enough space, need at least %llu blocks"
msgstr "niet genoeg ruimte: minstens %llu blokken nodig"

#: disk-utils/mkfs.bfs.c:223 fdisk/fdisk.c:2651
#, c-format
msgid "Device: %s\n"
msgstr "Apparaat: %s\n"

#: disk-utils/mkfs.bfs.c:224
#, c-format
msgid "Volume: <%-6s>\n"
msgstr "Volumen: <%-6s>\n"

#: disk-utils/mkfs.bfs.c:225
#, c-format
msgid "FSname: <%-6s>\n"
msgstr "Bestandssysteemnaam: <%-6s>\n"

#: disk-utils/mkfs.bfs.c:226
#, c-format
msgid "BlockSize: %d\n"
msgstr "Blokgrootte: %d\n"

#: disk-utils/mkfs.bfs.c:228
#, c-format
msgid "Inodes: %d (in 1 block)\n"
msgstr "Inodes: %d (in 1 blok)\n"

#: disk-utils/mkfs.bfs.c:231
#, c-format
msgid "Inodes: %d (in %lld blocks)\n"
msgstr "Inodes: %d (in %lld blokken)\n"

#: disk-utils/mkfs.bfs.c:233
#, c-format
msgid "Blocks: %lld\n"
msgstr "Blokken: %lld\n"

#: disk-utils/mkfs.bfs.c:234
#, c-format
msgid "Inode end: %d, Data end: %d\n"
msgstr "Inode-einde: %d, Gegevenseinde: %d\n"

#: disk-utils/mkfs.bfs.c:239
msgid "error writing superblock"
msgstr "fout bij schrijven van superblok"

#: disk-utils/mkfs.bfs.c:259
msgid "error writing root inode"
msgstr "fout bij schrijven van eerste inode"

#: disk-utils/mkfs.bfs.c:264
msgid "error writing inode"
msgstr "fout bij schrijven van inode"

#: disk-utils/mkfs.bfs.c:267
msgid "seek error"
msgstr "'seek'-fout"

#: disk-utils/mkfs.bfs.c:273
msgid "error writing . entry"
msgstr "fout bij schrijven van .-item"

#: disk-utils/mkfs.bfs.c:277
msgid "error writing .. entry"
msgstr "fout bij schrijven van ..-item"

#: disk-utils/mkfs.bfs.c:281
#, c-format
msgid "error closing %s"
msgstr "fout bij sluiten van %s"

#: disk-utils/mkfs.c:73
#, c-format
msgid "Usage: mkfs [-V] [-t fstype] [fs-options] device [size]\n"
msgstr "Gebruik:  mkfs [-V] [-t bestandssysteemsoort] [bestandssysteemopties] apparaat [grootte]\n"

#: disk-utils/mkfs.c:88 disk-utils/mkfs.c:96 fdisk/cfdisk.c:357
#: getopt/getopt.c:86 getopt/getopt.c:96 login-utils/wall.c:246
#, c-format
msgid "%s: Out of memory!\n"
msgstr "%s: Onvoldoende geheugen beschikbaar!\n"

#: disk-utils/mkfs.c:103
#, c-format
msgid "mkfs (%s)\n"
msgstr "mkfs (%s)\n"

#: disk-utils/mkfs.cramfs.c:126
#, c-format
msgid ""
"usage: %s [-h] [-v] [-b blksize] [-e edition] [-N endian] [-i file] [-n name] dirname outfile\n"
" -h         print this help\n"
" -v         be verbose\n"
" -E         make all warnings errors (non-zero exit status)\n"
" -b blksize use this blocksize, must equal page size\n"
" -e edition set edition number (part of fsid)\n"
" -N endian  set cramfs endianness (big|little|host), default host\n"
" -i file    insert a file image into the filesystem (requires >= 2.4.0)\n"
" -n name    set name of cramfs filesystem\n"
" -p         pad by %d bytes for boot code\n"
" -s         sort directory entries (old option, ignored)\n"
" -z         make explicit holes (requires >= 2.3.39)\n"
" dirname    root of the filesystem to be compressed\n"
" outfile    output file\n"
msgstr ""
"Gebruik:  %s [-h] [-v] [-b blokgrootte] [-e editie] [-i bestand]\n"
"                 [-N endian] [-n naam] mapnaam uitvoerbestand\n"
"\n"
" -h          deze hulptekst tonen\n"
" -v          gedetailleerde uitvoer produceren\n"
" -V          programmaversie tonen\n"
" -E          van alle waarschuwingen fouten maken (met niet-nul afsluitstatus)\n"
"\n"
" -b blokgrootte  deze blokgrootte gebruiken; moet gelijk zijn aan paginagrootte\n"
" -e editie   editienummer instellen (deel van bestandssysteem-ID)\n"
" -i bestand  een bestandsafbeelding invoegen in het bestandssysteem\n"
" -n naam     te gebruiken naam van 'cramfs'-bestandssysteem\n"
" -p          opvullen met %d bytes voor opstartcode\n"
" -s          (oude optie, wordt genegeerd) mapingangen sorteren\n"
" -z          expliciete gaten maken\n"
"\n"
" mapnaam = basismap van het in te pakken bestandssysteem\n"
" uitvoerbestand = te gebruiken uitvoerbestand\n"

#: disk-utils/mkfs.cramfs.c:339
#, c-format
msgid ""
"Very long (%zu bytes) filename `%s' found.\n"
" Please increase MAX_INPUT_NAMELEN in mkcramfs.c and recompile.  Exiting.\n"
msgstr ""
"Erg lange bestandsnaam '%2$s' gevonden (%1$zu bytes);\n"
"verhoog MAX_INPUT_NAMELEN in mkcramfs.c en hercompileer -- gestopt\n"

#: disk-utils/mkfs.cramfs.c:471
#, c-format
msgid "filesystem too big.  Exiting.\n"
msgstr "bestandssysteem is te groot -- gestopt\n"

#: disk-utils/mkfs.cramfs.c:636
#, c-format
msgid "AIEEE: block \"compressed\" to > 2*blocklength (%ld)\n"
msgstr "OEPS: blok is \"gecomprimeerd\" tot > 2*bloklengte (%ld)\n"

#: disk-utils/mkfs.cramfs.c:655
#, c-format
msgid "%6.2f%% (%+ld bytes)\t%s\n"
msgstr "%6.2f%% (%+ld bytes)\t%s\n"

#: disk-utils/mkfs.cramfs.c:853
#, c-format
msgid "warning: guestimate of required size (upper bound) is %lldMB, but maximum image size is %uMB.  We might die prematurely.\n"
msgstr ""
"Waarschuwing: de geschatte benodigde grootte is %lld MB (bovengrens),\n"
"maar de maximale afbeeldingsgrootte is %u MB.\n"
"Dit gaat misschien niet lukken.\n"

#: disk-utils/mkfs.cramfs.c:880
msgid "ROM image map"
msgstr "inlezen van ROM-afbeelding"

#: disk-utils/mkfs.cramfs.c:894
#, c-format
msgid "Including: %s\n"
msgstr "Inclusief: %s\n"

#: disk-utils/mkfs.cramfs.c:900
#, c-format
msgid "Directory data: %zd bytes\n"
msgstr "Mapgegevens: %zd bytes\n"

#: disk-utils/mkfs.cramfs.c:908
#, c-format
msgid "Everything: %zd kilobytes\n"
msgstr "Alles: %zd kilobytes\n"

#: disk-utils/mkfs.cramfs.c:913
#, c-format
msgid "Super block: %zd bytes\n"
msgstr "Superblok: %zd bytes\n"

#: disk-utils/mkfs.cramfs.c:920
#, c-format
msgid "CRC: %x\n"
msgstr "CRC: %x\n"

#: disk-utils/mkfs.cramfs.c:925
#, c-format
msgid "not enough space allocated for ROM image (%lld allocated, %zu used)\n"
msgstr "niet genoeg ruimte gereserveerd voor ROM-afbeelding (%lld gereserveerd, %zu gebruikt)\n"

#: disk-utils/mkfs.cramfs.c:933
msgid "ROM image"
msgstr "ROM-afbeelding"

#: disk-utils/mkfs.cramfs.c:937
#, c-format
msgid "ROM image write failed (%zd %zd)\n"
msgstr "Schrijven van ROM-afbeelding is mislukt (%zd %zd)\n"

#: disk-utils/mkfs.cramfs.c:946
#, c-format
msgid "warning: filenames truncated to 255 bytes.\n"
msgstr "Waarschuwing: bestandsnamen afgekapt tot 255 bytes.\n"

#: disk-utils/mkfs.cramfs.c:949
#, c-format
msgid "warning: files were skipped due to errors.\n"
msgstr "Waarschuwing: bestanden zijn overgeslagen vanwege fouten.\n"

#: disk-utils/mkfs.cramfs.c:952
#, c-format
msgid "warning: file sizes truncated to %luMB (minus 1 byte).\n"
msgstr "Waarschuwing: bestandsgroottes afgekapt tot %lu MB (minus 1 byte).\n"

#: disk-utils/mkfs.cramfs.c:957
#, c-format
msgid "warning: uids truncated to %u bits.  (This may be a security concern.)\n"
msgstr ""
"Waarschuwing: UID's afgekapt tot %u bits.\n"
"(Dit kan een veiligheidsprobleem zijn.)\n"

#: disk-utils/mkfs.cramfs.c:962
#, c-format
msgid "warning: gids truncated to %u bits.  (This may be a security concern.)\n"
msgstr ""
"Waarschuwing: GID's afgekapt tot %u bits.\n"
"(Dit kan een veiligheidsprobleem zijn.)\n"

#: disk-utils/mkfs.cramfs.c:967
#, c-format
msgid ""
"WARNING: device numbers truncated to %u bits.  This almost certainly means\n"
"that some device files will be wrong.\n"
msgstr ""
"WAARSCHUWING: apparaatnummers afgekapt tot %u bits.  Dit betekent zeer\n"
"waarschijnlijk dat sommige apparaatbestanden niet juist zullen zijn.\n"

#: disk-utils/mkfs.minix.c:154
#, c-format
msgid "Usage: %s [-c | -l filename] [-nXX] [-iXX] /dev/name [blocks]\n"
msgstr "Gebruik:  %s [-c | -l bestandsnaam] [-nXX] [-iXX] /dev/naam [blokken]\n"

#: disk-utils/mkfs.minix.c:178
#, c-format
msgid "%s is mounted; will not make a filesystem here!"
msgstr "%s is aangekoppeld; zal hier geen bestandssysteem maken!"

#: disk-utils/mkfs.minix.c:188
msgid "seek to boot block failed in write_tables"
msgstr "'seek' naar opstartblok is mislukt in write_tables()"

#: disk-utils/mkfs.minix.c:190
msgid "unable to clear boot sector"
msgstr "wissen van opstartsector is mislukt"

#: disk-utils/mkfs.minix.c:192
msgid "seek failed in write_tables"
msgstr "'seek' is mislukt in write_tables()"

#: disk-utils/mkfs.minix.c:196
msgid "unable to write inode map"
msgstr "schrijven van inode-kaart is mislukt"

#: disk-utils/mkfs.minix.c:198
msgid "unable to write zone map"
msgstr "schrijven van zone-kaart is mislukt"

#: disk-utils/mkfs.minix.c:200
msgid "unable to write inodes"
msgstr "schrijven van inodes is mislukt"

#: disk-utils/mkfs.minix.c:209
msgid "write failed in write_block"
msgstr "schrijven is mislukt in write_block()"

#: disk-utils/mkfs.minix.c:217 disk-utils/mkfs.minix.c:291
#: disk-utils/mkfs.minix.c:340
msgid "too many bad blocks"
msgstr "te veel slechte blokken"

#: disk-utils/mkfs.minix.c:225
msgid "not enough good blocks"
msgstr "onvoldoende goede blokken"

#: disk-utils/mkfs.minix.c:440
msgid "unable to allocate buffers for maps"
msgstr "reserveren van buffers voor bitkaarten is mislukt"

#: disk-utils/mkfs.minix.c:449
msgid "unable to allocate buffer for inodes"
msgstr "reserveren van buffer voor inodes is mislukt"

#: disk-utils/mkfs.minix.c:455
#, c-format
msgid ""
"Maxsize=%ld\n"
"\n"
msgstr ""
"MaxGrootte=%ld\n"
"\n"

#: disk-utils/mkfs.minix.c:469
msgid "seek failed during testing of blocks"
msgstr "'seek' is mislukt tijdens testen van blokken"

#: disk-utils/mkfs.minix.c:477
#, c-format
msgid "Weird values in do_check: probably bugs\n"
msgstr "Vreemde waarden in do_check(): waarschijnlijk een interne programmafout\n"

#: disk-utils/mkfs.minix.c:508 disk-utils/mkswap.c:320
msgid "seek failed in check_blocks"
msgstr "'seek' is mislukt in check_blocks()"

#: disk-utils/mkfs.minix.c:517
msgid "bad blocks before data-area: cannot make fs"
msgstr "slechte blokken vóór gegevensgebied: kan geen bestandssysteem maken"

#: disk-utils/mkfs.minix.c:523 disk-utils/mkfs.minix.c:548
#, c-format
msgid "%d bad blocks\n"
msgstr "%d slechte blokken\n"

#: disk-utils/mkfs.minix.c:525 disk-utils/mkfs.minix.c:550
#, c-format
msgid "one bad block\n"
msgstr "één slecht blok\n"

#: disk-utils/mkfs.minix.c:535
msgid "can't open file of bad blocks"
msgstr "kan slechteblokkenbestand niet openen"

#: disk-utils/mkfs.minix.c:539
#, c-format
msgid "badblock number input error on line %d\n"
msgstr "invoerfout in slechtbloknummer op regel %d\n"

#: disk-utils/mkfs.minix.c:540
msgid "cannot read badblocks file"
msgstr "kan slechteblokkenbestand niet lezen"

#: disk-utils/mkfs.minix.c:620
#, c-format
msgid "strtol error: number of blocks not specified"
msgstr "fout in strtol(): aantal blokken niet aangegeven"

#: disk-utils/mkfs.minix.c:639
#, c-format
msgid "unable to stat %s"
msgstr "kan status van %s niet bepalen"

#: disk-utils/mkfs.minix.c:645
#, c-format
msgid "unable to open %s"
msgstr "openen van %s is mislukt"

#: disk-utils/mkfs.minix.c:650
#, c-format
msgid "cannot determine sector size for %s"
msgstr "kan sectorgrootte voor %s niet bepalen"

#: disk-utils/mkfs.minix.c:652
#, c-format
msgid "block size smaller than physical sector size of %s"
msgstr "blokgrootte is kleiner dan fysieke sectorgrootte van %s"

#: disk-utils/mkfs.minix.c:655
#, c-format
msgid "cannot determine size of %s"
msgstr "kan grootte van %s niet bepalen"

#: disk-utils/mkfs.minix.c:663
#, c-format
msgid "will not try to make filesystem on '%s'"
msgstr "zal niet proberen een bestandssysteem te maken op '%s'"

#: disk-utils/mkfs.minix.c:665
msgid "number of blocks too small"
msgstr "aantal blokken is te klein"

#: disk-utils/mkswap.c:157
#, c-format
msgid "Bad user-specified page size %d\n"
msgstr "Ongeldige door gebruiker aangegeven paginagrootte %d\n"

#: disk-utils/mkswap.c:165
#, c-format
msgid "Using user-specified page size %d, instead of the system value %d\n"
msgstr "De opgegeven paginagrootte %d wordt gebruikt, in plaats van systeemwaarde %d.\n"

#: disk-utils/mkswap.c:171
#, c-format
msgid "%s: calloc() failed: %s\n"
msgstr "%s: calloc() is mislukt: %s\n"

#: disk-utils/mkswap.c:197
#, c-format
msgid "Bad swap header size, no label written.\n"
msgstr "Onjuiste grootte van kop van wisselgeheugen; er is geen label geschreven.\n"

#: disk-utils/mkswap.c:207
#, c-format
msgid "Label was truncated.\n"
msgstr "Label is afgekapt.\n"

#: disk-utils/mkswap.c:213
#, c-format
msgid "no label, "
msgstr "geen label, "

#: disk-utils/mkswap.c:221
#, c-format
msgid "no uuid\n"
msgstr "geen UUID\n"

#: disk-utils/mkswap.c:286
#, c-format
msgid "Usage: %s [-c] [-pPAGESZ] [-L label] [-U UUID] /dev/name [blocks]\n"
msgstr "Gebruik:  %s [-c] [-ppaginagrootte] [-L label] [-U UUID]  /dev/naam  [blokken]\n"

#: disk-utils/mkswap.c:302
msgid "too many bad pages"
msgstr "te veel slechte pagina's"

#: disk-utils/mkswap.c:315 misc-utils/look.c:182 misc-utils/setterm.c:1179
#: text-utils/more.c:2016 text-utils/more.c:2027
msgid "Out of memory"
msgstr "Onvoldoende geheugen beschikbaar"

#: disk-utils/mkswap.c:326
#, c-format
msgid "one bad page\n"
msgstr "één slechte pagina\n"

#: disk-utils/mkswap.c:328
#, c-format
msgid "%lu bad pages\n"
msgstr "%lu slechte pagina's\n"

#: disk-utils/mkswap.c:387 disk-utils/mkswap.c:424 disk-utils/mkswap.c:652
msgid "unable to rewind swap-device"
msgstr "terugspoelen van wisselgeheugenapparaat is mislukt"

#: disk-utils/mkswap.c:398
msgid "unable to alloc new libblkid probe"
msgstr "onvoldoende geheugen beschikbaar voor nieuwe libblkid-sonde"

#: disk-utils/mkswap.c:400
msgid "unable to assign device to libblkid probe"
msgstr "kan apparaat niet aan libblkid-sonde toewijzen"

#: disk-utils/mkswap.c:428
msgid "unable to erase bootbits sectors"
msgstr "wissen van bootbits-sectoren is mislukt"

#: disk-utils/mkswap.c:432
#, c-format
msgid "%s: %s: warning: don't erase bootbits sectors\n"
msgstr "%s: %s: waarschuwing: bootbits-sectoren niet wissen\n"

#: disk-utils/mkswap.c:435
#, c-format
msgid "        (%s partition table detected). "
msgstr "        (%s-partitietabel gedetecteerd). "

#: disk-utils/mkswap.c:437
#, c-format
msgid "        on whole disk. "
msgstr "        op de gehele schijf. "

#: disk-utils/mkswap.c:439
#, c-format
msgid "        (compiled without libblkid). "
msgstr "        (gecompileerd zonder 'libblkid'). "

#: disk-utils/mkswap.c:510
#, c-format
msgid "%1$s: warning: ignore -U (UUIDs are unsupported by %1$s)\n"
msgstr ""
"%1$s: waarschuwing: optie '-U' wordt genegeerd\n"
"(UUID's worden door %1$s niet ondersteund)\n"

#: disk-utils/mkswap.c:526
#, c-format
msgid "%s: does not support swapspace version %d.\n"
msgstr "%s: Ondersteunt wisselgeheugenversie %d niet.\n"

#: disk-utils/mkswap.c:534
msgid "error: UUID parsing failed"
msgstr "fout: kan UUID niet ontleden"

#: disk-utils/mkswap.c:545
#, c-format
msgid "%s: error: Nowhere to set up swap on?\n"
msgstr "%s: fout: Nergens om wisselgeheugen op in te stellen?\n"

#: disk-utils/mkswap.c:569
#, c-format
msgid "%s: error: size %llu KiB is larger than device size %llu KiB\n"
msgstr "%s: fout: grootte %llu KiB is groter dan apparaatgrootte (%llu KiB)\n"

#: disk-utils/mkswap.c:578
#, c-format
msgid "%s: error: swap area needs to be at least %ld KiB\n"
msgstr "%s: fout: wisselgeheugen moet minstens %ld KiB zijn\n"

#: disk-utils/mkswap.c:595
#, c-format
msgid "%s: warning: truncating swap area to %llu KiB\n"
msgstr "%s: waarschuwing: wisselgeheugen is afgekapt tot %llu KiB\n"

#: disk-utils/mkswap.c:618
#, c-format
msgid "%s: error: will not try to make swapdevice on '%s'\n"
msgstr "%s: fout: zal niet proberen wisselgeheugen te maken op '%s'\n"

#: disk-utils/mkswap.c:624
#, c-format
msgid "%s: error: %s is mounted; will not make swapspace.\n"
msgstr "%s: fout: %s is aangekoppeld; zal hier geen wisselgeheugen maken\n"

#: disk-utils/mkswap.c:641
msgid "Unable to set up swap-space: unreadable"
msgstr "Instellen van wisselgeheugen is mislukt: onleesbaar"

#: disk-utils/mkswap.c:644
#, c-format
msgid "Setting up swapspace version 1, size = %llu KiB\n"
msgstr "Instellen van wisselgeheugen, versie 1, grootte = %llu KiB\n"

#: disk-utils/mkswap.c:655
#, c-format
msgid "%s: %s: unable to write signature page: %s"
msgstr "%s: %s: schrijven van vingerafdrukpagina is mislukt: %s"

#: disk-utils/mkswap.c:666
msgid "fsync failed"
msgstr "fsync() is mislukt"

#: disk-utils/mkswap.c:677
#, c-format
msgid "%s: %s: unable to obtain selinux file label: %s\n"
msgstr "%s: %s: kan geen SELinux-bestandslabel verkrijgen: %s\n"

#: disk-utils/mkswap.c:683
msgid "unable to matchpathcon()"
msgstr "kan uit het pad geen context bepalen"

#: disk-utils/mkswap.c:686
msgid "unable to create new selinux context"
msgstr "kan geen nieuwe SELinux-context aanmaken"

#: disk-utils/mkswap.c:688
msgid "couldn't compute selinux context"
msgstr "kan geen nieuwe SELinux-context berekenen"

#: disk-utils/mkswap.c:694
#, c-format
msgid "%s: unable to relabel %s to %s: %s\n"
msgstr "%s: kan %s niet herlabelen naar %s: %s\n"

#: disk-utils/raw.c:50
#, c-format
msgid ""
"Usage:\n"
"  %s "
msgstr ""
"Gebruik:\n"
"  %s "

#: disk-utils/raw.c:125
#, c-format
msgid "Device '%s' is control raw dev (use raw<N> where <N> is greater than zero)\n"
msgstr ""
"Apparaat '%s' is de 'raw'-besturing;\n"
"(gebruik rawN, waar N groter is dan nul)\n"

#: disk-utils/raw.c:145
#, c-format
msgid "Cannot locate block device '%s' (%s)\n"
msgstr "Kan blok-apparaat '%s' niet lokaliseren (%s)\n"

#: disk-utils/raw.c:151
#, c-format
msgid "Device '%s' is not a block dev\n"
msgstr "Apparaat '%s' is geen blok-apparaat\n"

#: disk-utils/raw.c:186
#, c-format
msgid "Cannot open master raw device '"
msgstr "Kan hoofd-'raw'-apparaat niet openen: '"

#: disk-utils/raw.c:205
#, c-format
msgid "Cannot locate raw device '%s' (%s)\n"
msgstr "Kan 'raw'-apparaat '%s' niet lokaliseren (%s)\n"

#: disk-utils/raw.c:211
#, c-format
msgid "Raw device '%s' is not a character dev\n"
msgstr "'raw'-apparaat '%s' is geen byte-apparaat\n"

#: disk-utils/raw.c:216
#, c-format
msgid "Device '%s' is not a raw dev\n"
msgstr "Apparaat '%s' is geen 'raw'-apparaat\n"

#: disk-utils/raw.c:231
#, c-format
msgid "Error querying raw device (%s)\n"
msgstr "Fout tijdens polsen van 'raw'-apparaat (%s)\n"

#: disk-utils/raw.c:241 disk-utils/raw.c:261
#, c-format
msgid "raw%d:\tbound to major %d, minor %d\n"
msgstr "raw%d:\tgebonden aan hoofdnummer %d, subnummer %d\n"

#: disk-utils/raw.c:257
#, c-format
msgid "Error setting raw device (%s)\n"
msgstr "Fout bij instellen van 'raw'-apparaat (%s)\n"

#: disk-utils/swaplabel.c:54 disk-utils/swaplabel.c:67
#, c-format
msgid "%s: unable to probe device"
msgstr "%s: kan apparaat niet sonderen"

#: disk-utils/swaplabel.c:69
#, c-format
msgid "%s: ambivalent probing result, use wipefs(8)"
msgstr "%s: onduidelijk sonderingsresultaat; gebruik wipefs(8)"

#: disk-utils/swaplabel.c:71
#, c-format
msgid "%s: not a valid swap partition"
msgstr "%s: geen geldige wisselgeheugenpartitie"

#: disk-utils/swaplabel.c:77
#, c-format
msgid "%s: unsupported swap version '%s'"
msgstr "%s: niet-ondersteunde wisselgeheugenversie '%s'"

#: disk-utils/swaplabel.c:108
#, c-format
msgid "%s: failed to open"
msgstr "%s: openen is mislukt"

#: disk-utils/swaplabel.c:117
#, c-format
msgid "failed to parse UUID: %s"
msgstr "ontleden van UUID '%s' is mislukt"

#: disk-utils/swaplabel.c:121
#, c-format
msgid "%s: failed to seek to swap UUID"
msgstr "%s: 'seek' naar wisselgeheugen-UUID is mislukt"

#: disk-utils/swaplabel.c:125
#, c-format
msgid "%s: failed to write UUID"
msgstr "%s: schrijven van wisselgeheugen-UUID is mislukt"

#: disk-utils/swaplabel.c:136
#, c-format
msgid "%s: failed to seek to swap label "
msgstr "%s: 'seek' naar wisselgeheugenlabel is mislukt"

#: disk-utils/swaplabel.c:143
#, c-format
msgid "label is too long. Truncating it to '%s'"
msgstr "label is te lang; wordt afgekapt tot '%s'"

#: disk-utils/swaplabel.c:146
#, c-format
msgid "%s: failed to write label"
msgstr "%s: schrijven van label is mislukt"

#: disk-utils/swaplabel.c:161 misc-utils/wipefs.c:337
#, c-format
msgid ""
"Usage: %s [options] <device>\n"
"\n"
"Options:\n"
msgstr ""
"Gebruik:  %s [opties] <apparaat>\n"
"\n"
"Opties:\n"

#: disk-utils/swaplabel.c:165
#, c-format
msgid ""
" -h, --help          this help\n"
" -L, --label <label> specify a new label\n"
" -U, --uuid <uuid>   specify a new uuid\n"
msgstr ""
"  -h, --help            deze hulptekst tonen\n"
"  -L, --label <label>   te gebruiken nieuw label\n"
"  -U, --uuid <UUID>     te gebruiken nieuwe UUID\n"

#: disk-utils/swaplabel.c:169
#, c-format
msgid ""
"\n"
"For more information see swaplabel(8).\n"
msgstr ""
"\n"
"Voor meer informatie zie swaplabel(8).\n"

#: disk-utils/swaplabel.c:203
msgid "ignore -U (UUIDs are unsupported)"
msgstr "optie '-U' wordt genegeerd (UUID's worden niet ondersteund)"

#: fdisk/cfdisk.c:382 fdisk/cfdisk.c:1964
msgid "Unusable"
msgstr "[onbruikbaar]"

#: fdisk/cfdisk.c:384 fdisk/cfdisk.c:1966
msgid "Free Space"
msgstr "Vrije ruimte"

#: fdisk/cfdisk.c:399
#, c-format
msgid "Disk has been changed.\n"
msgstr "De schijf is veranderd.\n"

#: fdisk/cfdisk.c:401
#, c-format
msgid "Reboot the system to ensure the partition table is correctly updated.\n"
msgstr "Herstart het systeem om er zeker van te zijn dat de juiste partitietabel wordt gezien.\n"

#: fdisk/cfdisk.c:405
#, c-format
msgid ""
"\n"
"WARNING: If you have created or modified any\n"
"DOS 6.x partitions, please see the cfdisk manual\n"
"page for additional information.\n"
msgstr ""
"\n"
"WAARSCHUWING: Als u DOS-6.x-partities gemaakt of gewijzigd hebt,\n"
"raadpleeg dan het cfdisk-handboek voor meer informatie.\n"

#: fdisk/cfdisk.c:534
msgid "FATAL ERROR"
msgstr "FATALE FOUT"

#: fdisk/cfdisk.c:535
msgid "Press any key to exit cfdisk"
msgstr "Druk op een toets om cfdisk af te sluiten"

#: fdisk/cfdisk.c:582 fdisk/cfdisk.c:590
msgid "Cannot seek on disk drive"
msgstr "Kan geen 'seek' doen op schijf"

#: fdisk/cfdisk.c:584
msgid "Cannot read disk drive"
msgstr "Kan schijf niet lezen"

#: fdisk/cfdisk.c:592
msgid "Cannot write disk drive"
msgstr "Kan niet naar schijf schrijven"

#: fdisk/cfdisk.c:800
msgid "Too many partitions"
msgstr "Te veel partities"

#: fdisk/cfdisk.c:805
msgid "Partition begins before sector 0"
msgstr "Partitie begint vóór sector 0"

#: fdisk/cfdisk.c:810
msgid "Partition ends before sector 0"
msgstr "Partitie eindigt vóór sector 0"

#: fdisk/cfdisk.c:815
msgid "Partition begins after end-of-disk"
msgstr "Partitie begint na einde van schijf"

#: fdisk/cfdisk.c:820
msgid "Partition ends after end-of-disk"
msgstr "Partitie eindigt na einde van schijf"

#: fdisk/cfdisk.c:825
msgid "Partition ends in the final partial cylinder"
msgstr "Partitie eindigt in de laatste gedeeltelijke cilinder"

#: fdisk/cfdisk.c:849
msgid "logical partitions not in disk order"
msgstr "logische partities liggen niet in schijfvolgorde"

#: fdisk/cfdisk.c:852
msgid "logical partitions overlap"
msgstr "logische partities overlappen"

#: fdisk/cfdisk.c:856
msgid "enlarged logical partitions overlap"
msgstr "vergrote logische partities overlappen"

#: fdisk/cfdisk.c:886
msgid "!!!! Internal error creating logical drive with no extended partition !!!!"
msgstr "**Interne programmafout** bij het maken van logische schijf zonder uitgebreide partitie"

#: fdisk/cfdisk.c:897 fdisk/cfdisk.c:909
msgid "Cannot create logical drive here -- would create two extended partitions"
msgstr "Kan hier geen logische schijf maken -- zou twee uitgebreide partities maken"

#: fdisk/cfdisk.c:1049
msgid "Menu item too long. Menu may look odd."
msgstr "Menu-item is te lang.  Menu ziet er misschien raar uit."

#: fdisk/cfdisk.c:1105
msgid "Menu without direction. Defaulting to horizontal."
msgstr "Menu zonder richting.  Standaard wordt gebruikt: horizontaal."

#: fdisk/cfdisk.c:1237
msgid "Illegal key"
msgstr "Ongeldige toets"

#: fdisk/cfdisk.c:1260
msgid "Press a key to continue"
msgstr "Druk op een toets om verder te gaan"

#: fdisk/cfdisk.c:1307 fdisk/cfdisk.c:1935 fdisk/cfdisk.c:2467
#: fdisk/cfdisk.c:2469
msgid "Primary"
msgstr "Primair"

#: fdisk/cfdisk.c:1307
msgid "Create a new primary partition"
msgstr "P = een nieuwe primaire partitie maken"

#: fdisk/cfdisk.c:1308 fdisk/cfdisk.c:1935 fdisk/cfdisk.c:2466
#: fdisk/cfdisk.c:2469
msgid "Logical"
msgstr "Logisch"

#: fdisk/cfdisk.c:1308
msgid "Create a new logical partition"
msgstr "L = een nieuwe logische partitie maken"

#: fdisk/cfdisk.c:1309 fdisk/cfdisk.c:1364 fdisk/cfdisk.c:2140
msgid "Cancel"
msgstr "annuleren"

#: fdisk/cfdisk.c:1309 fdisk/cfdisk.c:1364
msgid "Don't create a partition"
msgstr "Esc,Esc = Geen partitie maken"

#: fdisk/cfdisk.c:1325
msgid "!!! Internal error !!!"
msgstr "**Interne programmafout**"

#: fdisk/cfdisk.c:1328
msgid "Size (in MB): "
msgstr "Grootte (in MB): "

#: fdisk/cfdisk.c:1362
msgid "Beginning"
msgstr "Begin"

#: fdisk/cfdisk.c:1362
msgid "Add partition at beginning of free space"
msgstr "B = partitie toevoegen aan begin van vrije ruimte"

#: fdisk/cfdisk.c:1363
msgid "End"
msgstr "Einde"

#: fdisk/cfdisk.c:1363
msgid "Add partition at end of free space"
msgstr "E = Partitie toevoegen aan einde van vrije ruimte"

#: fdisk/cfdisk.c:1381
msgid "No room to create the extended partition"
msgstr "Er is geen ruimte om de uitgebreide partitie te maken"

#: fdisk/cfdisk.c:1455
msgid "No partition table.\n"
msgstr "Geen partitietabel aanwezig.\n"

#: fdisk/cfdisk.c:1459
msgid "No partition table. Starting with zero table."
msgstr "Geen partitietabel aanwezig.  Gestart met een lege tabel."

#: fdisk/cfdisk.c:1469
msgid "Bad signature on partition table"
msgstr "Onjuiste vingerafdruk in partitietabel"

#: fdisk/cfdisk.c:1473
msgid "Unknown partition table type"
msgstr "Onbekend partitietabeltype"

#: fdisk/cfdisk.c:1475
msgid "Do you wish to start with a zero table [y/N] ?"
msgstr "Wilt u met een lege tabel beginnen? [j/N]"

#: fdisk/cfdisk.c:1523
msgid "You specified more cylinders than fit on disk"
msgstr "U hebt meer cilinders aangegeven dan er op de schijf passen"

#: fdisk/cfdisk.c:1555
msgid "Cannot open disk drive"
msgstr "Kan schijf niet openen"

#: fdisk/cfdisk.c:1557 fdisk/cfdisk.c:1746
msgid "Opened disk read-only - you have no permission to write"
msgstr "Schijf is als alleen-lezen geopend -- u hebt geen toegangsrechten om te schrijven"

#: fdisk/cfdisk.c:1568
msgid "Warning!!  Unsupported GPT (GUID Partition Table) detected. Use GNU Parted."
msgstr ""
"Waarschuwing!!  Niet-ondersteunde GPT (GUID-partitietabel) gevonden!\n"
"Gebruik GNU 'parted'."

#: fdisk/cfdisk.c:1587
msgid "Cannot get disk size"
msgstr "Kan schijfgrootte niet bepalen"

#: fdisk/cfdisk.c:1613
msgid "Bad primary partition"
msgstr "Ongeldige primaire partitie"

#: fdisk/cfdisk.c:1643
msgid "Bad logical partition"
msgstr "Ongeldige logische partitie"

#: fdisk/cfdisk.c:1758
msgid "Warning!!  This may destroy data on your disk!"
msgstr "Waarschuwing!!  Dit kan gegevens op uw schijf wissen!"

#: fdisk/cfdisk.c:1762
msgid "Are you sure you want to write the partition table to disk? (yes or no): "
msgstr "Weet u zeker dat u de partitietabel naar schijf wilt schrijven? (ja of nee): "

#: fdisk/cfdisk.c:1768
msgid "no"
msgstr "nee"

#: fdisk/cfdisk.c:1770
msgid "Did not write partition table to disk"
msgstr "Partitietabel is niet naar schijf geschreven."

#: fdisk/cfdisk.c:1772
msgid "yes"
msgstr "ja"

#: fdisk/cfdisk.c:1776
msgid "Please enter `yes' or `no'"
msgstr "Antwoord met 'ja' of 'nee'."

#: fdisk/cfdisk.c:1780
msgid "Writing partition table to disk..."
msgstr "Schrijven van partitietabel naar schijf..."

#: fdisk/cfdisk.c:1805 fdisk/cfdisk.c:1809
msgid "Wrote partition table to disk"
msgstr "De partitietabel is naar schijf geschreven."

#: fdisk/cfdisk.c:1807
msgid "Wrote partition table, but re-read table failed.  Run partprobe(8), kpartx(8) or reboot to update table."
msgstr ""
"Partitietabel is geschreven, maar opnieuw inlezen is mislukt.\n"
"Draai partprobe(8) of kpartx(8), of herstart uw systeem om de\n"
"juiste tabel te gebruiken."

#: fdisk/cfdisk.c:1817
msgid "No primary partitions are marked bootable. DOS MBR cannot boot this."
msgstr "Er is geen primaire partitie als opstartbaar aangegeven.  DOS MBR kan dit niet opstarten."

#: fdisk/cfdisk.c:1819
msgid "More than one primary partition is marked bootable. DOS MBR cannot boot this."
msgstr "Meer dan één primaire partitie is als opstartbaar aangegeven.  DOS MBR kan dit niet opstarten."

#: fdisk/cfdisk.c:1877 fdisk/cfdisk.c:1996 fdisk/cfdisk.c:2080
msgid "Enter filename or press RETURN to display on screen: "
msgstr "Geef een bestandsnaam op, of druk op Enter voor weergave op het scherm: "

#: fdisk/cfdisk.c:1886 fdisk/cfdisk.c:2004 fdisk/cfdisk.c:2088
#, c-format
msgid "Cannot open file '%s'"
msgstr "Kan bestand '%s' niet openen"

#: fdisk/cfdisk.c:1897
#, c-format
msgid "Disk Drive: %s\n"
msgstr "Schijf: %s\n"

#: fdisk/cfdisk.c:1899
msgid "Sector 0:\n"
msgstr "Sector 0:\n"

#: fdisk/cfdisk.c:1906
#, c-format
msgid "Sector %d:\n"
msgstr "Sector %d:\n"

#: fdisk/cfdisk.c:1926
msgid "   None   "
msgstr "   [geen] "

#: fdisk/cfdisk.c:1928
msgid "   Pri/Log"
msgstr "   Pri/Log"

#: fdisk/cfdisk.c:1930
msgid "   Primary"
msgstr "   Primair"

#: fdisk/cfdisk.c:1932
msgid "   Logical"
msgstr "   Logisch"

#: fdisk/cfdisk.c:1970 fdisk/fdisk.c:1783 fdisk/fdisk.c:2122
#: fdisk/fdisksgilabel.c:227 fdisk/fdisksunlabel.c:616 fdisk/sfdisk.c:638
msgid "Unknown"
msgstr "[onbekend]"

#: fdisk/cfdisk.c:1976 fdisk/cfdisk.c:2444 fdisk/fdisksunlabel.c:39
msgid "Boot"
msgstr "Opst."

#: fdisk/cfdisk.c:1978
#, c-format
msgid "(%02X)"
msgstr "(%02X)"

#: fdisk/cfdisk.c:1980
msgid "None"
msgstr "geen"

#: fdisk/cfdisk.c:2015 fdisk/cfdisk.c:2099
#, c-format
msgid "Partition Table for %s\n"
msgstr "Partitietabel van %s:\n"

#: fdisk/cfdisk.c:2017
msgid "               First       Last\n"
msgstr "                Eerste     Laatste\n"

#: fdisk/cfdisk.c:2018
msgid " # Type       Sector      Sector   Offset    Length   Filesystem Type (ID) Flag\n"
msgstr " # Type         sector      sector Plaats      Lengte Bestandssysteem (ID) Vlag\n"

#: fdisk/cfdisk.c:2019
msgid "-- ------- ----------- ----------- ------ ----------- -------------------- ----\n"
msgstr "-- ------- ----------- ----------- ------ ----------- -------------------- ----\n"

#: fdisk/cfdisk.c:2102
msgid "         ---Starting----      ----Ending-----    Start     Number of\n"
msgstr "          ----Begin-----       ----Einde-----                  Aantal\n"

#: fdisk/cfdisk.c:2103
msgid " # Flags Head Sect  Cyl   ID  Head Sect  Cyl     Sector    Sectors\n"
msgstr " #  Vlag  Kop  Sec  Cil   ID   Kop  Sec   Cil Startsector    sectoren\n"

#: fdisk/cfdisk.c:2104
msgid "-- ----- ---- ---- ----- ---- ---- ---- ----- ----------- -----------\n"
msgstr "--  ----  ---  --- ---- ----   ---  --- ----- ----------- -----------\n"

#: fdisk/cfdisk.c:2137
msgid "Raw"
msgstr "Ruw"

#: fdisk/cfdisk.c:2137
msgid "Print the table using raw data format"
msgstr "R = de tabel in ruwe-gegevensindeling weergeven"

#: fdisk/cfdisk.c:2138 fdisk/cfdisk.c:2241
msgid "Sectors"
msgstr "Sectoren"

#: fdisk/cfdisk.c:2138
msgid "Print the table ordered by sectors"
msgstr "S = de tabel geordend op sectoren weergeven"

#: fdisk/cfdisk.c:2139
msgid "Table"
msgstr "Tabel"

#: fdisk/cfdisk.c:2139
msgid "Just print the partition table"
msgstr "T = gewoon de partitietabel weergeven"

#: fdisk/cfdisk.c:2140
msgid "Don't print the table"
msgstr "Esc,Esc = tabel niet weergeven"

#: fdisk/cfdisk.c:2168
msgid "Help Screen for cfdisk"
msgstr "Hulpscherm voor cfdisk"

#: fdisk/cfdisk.c:2170
msgid "This is cfdisk, a curses based disk partitioning program, which"
msgstr "Dit is cfdisk, een schijfpartitioneringsprogramma waarmee u op"

#: fdisk/cfdisk.c:2171
msgid "allows you to create, delete and modify partitions on your hard"
msgstr "uw harde schijf partities kunt maken, wijzigen of verwijderen."

# Deze vertaling is met opzet leeg.
#: fdisk/cfdisk.c:2172
msgid "disk drive."
msgstr "  "

#: fdisk/cfdisk.c:2174
msgid "Copyright (C) 1994-1999 Kevin E. Martin & aeb"
msgstr "Copyright (C) 1994-1999 Kevin E. Martin & aeb"

#: fdisk/cfdisk.c:2176
msgid "Command      Meaning"
msgstr "Opdracht   Betekenis"

#: fdisk/cfdisk.c:2177
msgid "-------      -------"
msgstr "--------   ---------"

#: fdisk/cfdisk.c:2178
msgid "  b          Toggle bootable flag of the current partition"
msgstr "    b      'opstartbaar'-vlag voor huidige partitie aan/uitzetten"

#: fdisk/cfdisk.c:2179
msgid "  d          Delete the current partition"
msgstr "    d      huidige partitie verwijderen"

#: fdisk/cfdisk.c:2180
msgid "  g          Change cylinders, heads, sectors-per-track parameters"
msgstr "    g      cilinders, koppen, sectoren-per-spoor wijzigen;"

#: fdisk/cfdisk.c:2181
msgid "             WARNING: This option should only be used by people who"
msgstr "             *waarschuwing*: deze optie dient alleen te worden gebruikt"

#: fdisk/cfdisk.c:2182
msgid "             know what they are doing."
msgstr "             door mensen die echt weten wat ze doen"

#: fdisk/cfdisk.c:2183
msgid "  h          Print this screen"
msgstr "    h      dit hulpscherm tonen"

#: fdisk/cfdisk.c:2184
msgid "  m          Maximize disk usage of the current partition"
msgstr "    m      schijfgebruik van de huidige partitie maximaliseren;"

#: fdisk/cfdisk.c:2185
msgid "             Note: This may make the partition incompatible with"
msgstr "             dit kan een partitie incompatibel maken met DOS, OS/2, ..."

#: fdisk/cfdisk.c:2186
msgid "             DOS, OS/2, ..."
msgstr "           "

#: fdisk/cfdisk.c:2187
msgid "  n          Create new partition from free space"
msgstr "    n      nieuwe partitie maken in de vrije ruimte"

#: fdisk/cfdisk.c:2188
msgid "  p          Print partition table to the screen or to a file"
msgstr "    p      partitietabel weergeven op scherm of naar bestand;"

#: fdisk/cfdisk.c:2189
msgid "             There are several different formats for the partition"
msgstr "             er zijn verschillende opmaken waaruit u kunt kiezen:"

#: fdisk/cfdisk.c:2190
msgid "             that you can choose from:"
msgstr "           "

#: fdisk/cfdisk.c:2191
msgid "                r - Raw data (exactly what would be written to disk)"
msgstr "             r - ruwe gegevens (exact wat naar schijf zou worden geschreven)"

#: fdisk/cfdisk.c:2192
msgid "                s - Table ordered by sectors"
msgstr "             s - tabel geordend op sectoren"

#: fdisk/cfdisk.c:2193
msgid "                t - Table in raw format"
msgstr "             t - tabel in ruwe opmaak"

#: fdisk/cfdisk.c:2194
msgid "  q          Quit program without writing partition table"
msgstr "    q      programma afsluiten zonder de partitietabel te schrijven"

#: fdisk/cfdisk.c:2195
msgid "  t          Change the filesystem type"
msgstr "    t      bestandssysteemsoort wijzigen"

#: fdisk/cfdisk.c:2196
msgid "  u          Change units of the partition size display"
msgstr "    u      gebruikte eenheid voor partitiegrootte wijzigen"

#: fdisk/cfdisk.c:2197
msgid "             Rotates through MB, sectors and cylinders"
msgstr "             (roteert door MB, sectoren en cilinders)"

#: fdisk/cfdisk.c:2198
msgid "  W          Write partition table to disk (must enter upper case W)"
msgstr "    W      partitietabel naar schijf schrijven (moet met hoofdletter);"

#: fdisk/cfdisk.c:2199
msgid "             Since this might destroy data on the disk, you must"
msgstr "             omdat dit mogelijk gegevens op de schijf wist, dient u het"

#: fdisk/cfdisk.c:2200
msgid "             either confirm or deny the write by entering `yes' or"
msgstr "             schrijven te bevestigen met 'ja' of te weigeren met 'nee'"

#: fdisk/cfdisk.c:2201
msgid "             `no'"
msgstr "           "

#: fdisk/cfdisk.c:2202
msgid "Up Arrow     Move cursor to the previous partition"
msgstr "  omhoog   aanwijzer naar vorige partitie verplaatsen"

#: fdisk/cfdisk.c:2203
msgid "Down Arrow   Move cursor to the next partition"
msgstr "  omlaag   aanwijzer naar volgende partitie verplaatsen"

#: fdisk/cfdisk.c:2204
msgid "CTRL-L       Redraws the screen"
msgstr "  Ctrl-L   het scherm opnieuw tekenen"

#: fdisk/cfdisk.c:2205
msgid "  ?          Print this screen"
msgstr "    ?      dit hulpscherm tonen"

#: fdisk/cfdisk.c:2207
msgid "Note: All of the commands can be entered with either upper or lower"
msgstr "Opmerking: alle opdrachten kunnen zowel met hoofdletter als kleine letter"

#: fdisk/cfdisk.c:2208
msgid "case letters (except for Writes)."
msgstr "worden ingevoerd -- behalve W."

#: fdisk/cfdisk.c:2239 fdisk/fdisksunlabel.c:232
msgid "Cylinders"
msgstr "Cilinders"

#: fdisk/cfdisk.c:2239
msgid "Change cylinder geometry"
msgstr "Cilindergeometrie wijzigen"

#: fdisk/cfdisk.c:2240 fdisk/fdisksunlabel.c:230
msgid "Heads"
msgstr "Koppen"

#: fdisk/cfdisk.c:2240
msgid "Change head geometry"
msgstr "Koppengeometrie wijzigen"

#: fdisk/cfdisk.c:2241
msgid "Change sector geometry"
msgstr "Sectorgeometrie wijzigen"

#: fdisk/cfdisk.c:2242
msgid "Done"
msgstr "Klaar"

#: fdisk/cfdisk.c:2242
msgid "Done with changing geometry"
msgstr "Klaar met wijzigen van geometrie"

#: fdisk/cfdisk.c:2255
msgid "Enter the number of cylinders: "
msgstr "Geef het aantal cilinders: "

#: fdisk/cfdisk.c:2266 fdisk/cfdisk.c:2839
msgid "Illegal cylinders value"
msgstr "Onjuiste waarde voor cilinders"

#: fdisk/cfdisk.c:2272
msgid "Enter the number of heads: "
msgstr "Geef het aantal koppen: "

#: fdisk/cfdisk.c:2279 fdisk/cfdisk.c:2849
msgid "Illegal heads value"
msgstr "Onjuiste waarde voor koppen"

#: fdisk/cfdisk.c:2285
msgid "Enter the number of sectors per track: "
msgstr "Geef het aantal sectoren per spoor: "

#: fdisk/cfdisk.c:2292 fdisk/cfdisk.c:2856
msgid "Illegal sectors value"
msgstr "Onjuiste waarde voor sectoren"

#: fdisk/cfdisk.c:2395
msgid "Enter filesystem type: "
msgstr "Geef het soort bestandssysteem: "

#: fdisk/cfdisk.c:2413
msgid "Cannot change FS Type to empty"
msgstr "Kan bestandssysteemsoort niet naar 'leeg' veranderen"

#: fdisk/cfdisk.c:2415
msgid "Cannot change FS Type to extended"
msgstr "Kan bestandssysteemsoort niet naar 'uitgebreid' veranderen"

#: fdisk/cfdisk.c:2446
#, c-format
msgid "Unk(%02X)"
msgstr "?(%02X)"

#: fdisk/cfdisk.c:2449 fdisk/cfdisk.c:2452
msgid ", NC"
msgstr ", NC"

#: fdisk/cfdisk.c:2457 fdisk/cfdisk.c:2460
msgid "NC"
msgstr "NC"

#: fdisk/cfdisk.c:2468
msgid "Pri/Log"
msgstr "Pri/Log"

#: fdisk/cfdisk.c:2475
#, c-format
msgid "Unknown (%02X)"
msgstr "Onbekend (%02X)"

#: fdisk/cfdisk.c:2544
#, c-format
msgid "Disk Drive: %s"
msgstr "Schijf: %s"

#: fdisk/cfdisk.c:2551
#, c-format
msgid "Size: %lld bytes, %lld MB"
msgstr "Grootte: %lld bytes, %lld MB"

#: fdisk/cfdisk.c:2554
#, c-format
msgid "Size: %lld bytes, %lld.%lld GB"
msgstr "Grootte: %lld bytes, %lld.%lld GB"

#: fdisk/cfdisk.c:2558
#, c-format
msgid "Heads: %d   Sectors per Track: %d   Cylinders: %lld"
msgstr "Koppen: %d   Sectoren per spoor: %d   Cilinders: %lld"

#: fdisk/cfdisk.c:2562 login-utils/chfn.c:377
msgid "Name"
msgstr "Naam"

#: fdisk/cfdisk.c:2563
msgid "Flags"
msgstr "Vlag"

#: fdisk/cfdisk.c:2564
msgid "Part Type"
msgstr "Part.type"

#: fdisk/cfdisk.c:2565
msgid "FS Type"
msgstr "Bestandssysteem"

#: fdisk/cfdisk.c:2566
msgid "[Label]"
msgstr "[Label]"

#: fdisk/cfdisk.c:2568
msgid "    Sectors"
msgstr "   Sectoren"

#: fdisk/cfdisk.c:2570
msgid "  Cylinders"
msgstr "  Cilinders"

#: fdisk/cfdisk.c:2572
msgid "  Size (MB)"
msgstr "Grootte (MB)"

#: fdisk/cfdisk.c:2574
msgid "  Size (GB)"
msgstr "Grootte (GB)"

#: fdisk/cfdisk.c:2629
msgid "Bootable"
msgstr "opstartBaar"

#: fdisk/cfdisk.c:2629
msgid "Toggle bootable flag of the current partition"
msgstr "B = huidige partitie wel/niet als opstartbaar markeren"

#: fdisk/cfdisk.c:2630
msgid "Delete"
msgstr "verwijDeren"

#: fdisk/cfdisk.c:2630
msgid "Delete the current partition"
msgstr "D = deze partitie verwijderen"

#: fdisk/cfdisk.c:2631
msgid "Geometry"
msgstr "Geometrie"

#: fdisk/cfdisk.c:2631
msgid "Change disk geometry (experts only)"
msgstr "G = schijfgeometrie wijzigen (alleen voor experts)"

#: fdisk/cfdisk.c:2632
msgid "Help"
msgstr "Hulp"

#: fdisk/cfdisk.c:2632
msgid "Print help screen"
msgstr "H = hulpscherm tonen"

#: fdisk/cfdisk.c:2633
msgid "Maximize"
msgstr "Maximeren"

#: fdisk/cfdisk.c:2633
msgid "Maximize disk usage of the current partition (experts only)"
msgstr "M = schijfgebruik maximaliseren voor huidige partitie (alleen voor experts)"

#: fdisk/cfdisk.c:2634
msgid "New"
msgstr "Nieuw"

#: fdisk/cfdisk.c:2634
msgid "Create new partition from free space"
msgstr "N = nieuwe partitie maken in de vrije ruimte"

#: fdisk/cfdisk.c:2635
msgid "Print"
msgstr "P:tonen"

#: fdisk/cfdisk.c:2635
msgid "Print partition table to the screen or to a file"
msgstr "P = partitietabel weergeven (op het scherm of naar een bestand)"

#: fdisk/cfdisk.c:2636
msgid "Quit"
msgstr "Q:stoppen"

#: fdisk/cfdisk.c:2636
msgid "Quit program without writing partition table"
msgstr "Q = programma afsluiten zonder partitietabel te schrijven"

#: fdisk/cfdisk.c:2637
msgid "Type"
msgstr "T:systeem"

#: fdisk/cfdisk.c:2637
msgid "Change the filesystem type (DOS, Linux, OS/2 and so on)"
msgstr "T = bestandssysteemsoort wijzigen (DOS, Linux, OS/2, ...)"

#: fdisk/cfdisk.c:2638
msgid "Units"
msgstr "U:eenheid"

#: fdisk/cfdisk.c:2638
msgid "Change units of the partition size display (MB, sect, cyl)"
msgstr "U = weergave-eenheid wijzigen (MB, sectoren, cilinders)"

#: fdisk/cfdisk.c:2639
msgid "Write"
msgstr "W:schrijven"

#: fdisk/cfdisk.c:2639
msgid "Write partition table to disk (this might destroy data)"
msgstr "W = partitietabel naar schijf schrijven (dit kan gegevens wissen)"

#: fdisk/cfdisk.c:2686
msgid "Cannot make this partition bootable"
msgstr "Kan deze partitie niet opstartbaar maken"

#: fdisk/cfdisk.c:2696
msgid "Cannot delete an empty partition"
msgstr "Kan geen lege partitie verwijderen"

#: fdisk/cfdisk.c:2716 fdisk/cfdisk.c:2718
msgid "Cannot maximize this partition"
msgstr "Kan deze partitie niet maximaliseren"

#: fdisk/cfdisk.c:2726
msgid "This partition is unusable"
msgstr "Deze partitie is onbruikbaar"

#: fdisk/cfdisk.c:2728
msgid "This partition is already in use"
msgstr "Deze partitie is al in gebruik"

#: fdisk/cfdisk.c:2745
msgid "Cannot change the type of an empty partition"
msgstr "Kan het type van een lege partitie niet wijzigen"

#: fdisk/cfdisk.c:2772 fdisk/cfdisk.c:2778
msgid "No more partitions"
msgstr "Geen partities meer over"

#: fdisk/cfdisk.c:2785
msgid "Illegal command"
msgstr "Onjuiste opdracht"

#: fdisk/cfdisk.c:2795
#, c-format
msgid "Copyright (C) 1994-2002 Kevin E. Martin & aeb\n"
msgstr "Copyright (C) 1994-2002 Kevin E. Martin & aeb\n"

#: fdisk/cfdisk.c:2802
#, c-format
msgid ""
"\n"
"Usage:\n"
"Print version:\n"
"        %s -v\n"
"Print partition table:\n"
"        %s -P {r|s|t} [options] device\n"
"Interactive use:\n"
"        %s [options] device\n"
"\n"
"Options:\n"
"-a: Use arrow instead of highlighting;\n"
"-z: Start with a zero partition table, instead of reading the pt from disk;\n"
"-c C -h H -s S: Override the kernel's idea of the number of cylinders,\n"
"                the number of heads and the number of sectors/track.\n"
"\n"
msgstr ""
"\n"
"Gebruik:  %s [opties] apparaat              interactief\n"
"          %s -P{r|s|t} [opties] apparaat    partitietabel weergeven\n"
"          %s -v                             programmaversie tonen\n"
"Opties:\n"
"-a   een pijl gebruiken in plaats van een inverse balk;\n"
"-z   met lege partitietabel starten, in plaats van deze van schijf te lezen;\n"
"-c C -h K -s S   andere waarden afdwingen voor het aantal cilinders,\n"
"                 koppen en sectoren/spoor dan de kernel aangeeft.\n"
"\n"

#: fdisk/fdiskaixlabel.c:27
msgid ""
"\n"
"\tThere is a valid AIX label on this disk.\n"
"\tUnfortunately Linux cannot handle these\n"
"\tdisks at the moment.  Nevertheless some\n"
"\tadvice:\n"
"\t1. fdisk will destroy its contents on write.\n"
"\t2. Be sure that this disk is NOT a still vital\n"
"\t   part of a volume group. (Otherwise you may\n"
"\t   erase the other disks as well, if unmirrored.)\n"
"\t3. Before deleting this physical volume be sure\n"
"\t   to remove the disk logically from your AIX\n"
"\t   machine.  (Otherwise you become an AIXpert)."
msgstr ""
"\n"
"    Er staat een geldig AIX-label op deze schijf.\n"
"    Helaas ondersteunt Linux deze schijven op dit moment niet.\n"
"    Toch wat advies:\n"
"    1. Bij schrijven zal fdisk de inhoud ervan WISSEN.\n"
"    2. Controleer of deze schijf ECHT NIET nog deel uitmaakt\n"
"       van een volumengroep -- anders wist u mogelijk de andere\n"
"       schijven ook, als er geen mirror is.\n"
"    3. Haal, voordat u dit fysieke volumen wist, de schijf logisch\n"
"       uit uw AIX-machine.  (Anders wordt u een AIXpert)."

#: fdisk/fdiskbsdlabel.c:121
#, c-format
msgid ""
"\n"
"BSD label for device: %s\n"
msgstr ""
"\n"
"BSD-label voor apparaat: %s\n"

#: fdisk/fdiskbsdlabel.c:128 fdisk/fdisk.c:395 fdisk/fdisk.c:414
#: fdisk/fdisk.c:432 fdisk/fdisk.c:439 fdisk/fdisk.c:462 fdisk/fdisk.c:480
#: fdisk/fdisk.c:496 fdisk/fdisk.c:512
msgid "Command action"
msgstr "Opdracht  Actie"

#: fdisk/fdiskbsdlabel.c:129
msgid "   d   delete a BSD partition"
msgstr "   d      een BSD-partitie verwijderen"

#: fdisk/fdiskbsdlabel.c:130
msgid "   e   edit drive data"
msgstr "   e      schijfgegevens bewerken"

#: fdisk/fdiskbsdlabel.c:131
msgid "   i   install bootstrap"
msgstr "   i      bootstrap installeren"

#: fdisk/fdiskbsdlabel.c:132
msgid "   l   list known filesystem types"
msgstr "   l      bekende bestandssysteemsoorten opsommen"

#: fdisk/fdiskbsdlabel.c:133 fdisk/fdisk.c:401 fdisk/fdisk.c:420
#: fdisk/fdisk.c:433 fdisk/fdisk.c:445 fdisk/fdisk.c:470 fdisk/fdisk.c:487
#: fdisk/fdisk.c:503 fdisk/fdisk.c:521
msgid "   m   print this menu"
msgstr "   m      dit menu tonen"

#: fdisk/fdiskbsdlabel.c:134
msgid "   n   add a new BSD partition"
msgstr "   n      een nieuwe BSD-partitie toevoegen"

#: fdisk/fdiskbsdlabel.c:135
msgid "   p   print BSD partition table"
msgstr "   p      BSD-partitietabel weergeven"

#: fdisk/fdiskbsdlabel.c:136 fdisk/fdisk.c:405 fdisk/fdisk.c:424
#: fdisk/fdisk.c:435 fdisk/fdisk.c:449 fdisk/fdisk.c:472 fdisk/fdisk.c:489
#: fdisk/fdisk.c:505 fdisk/fdisk.c:523
msgid "   q   quit without saving changes"
msgstr "   q      afsluiten zonder wijzigingen op te slaan"

#: fdisk/fdiskbsdlabel.c:137 fdisk/fdisk.c:473 fdisk/fdisk.c:490
#: fdisk/fdisk.c:506 fdisk/fdisk.c:524
msgid "   r   return to main menu"
msgstr "   r      terug naar hoofdmenu"

#: fdisk/fdiskbsdlabel.c:138
msgid "   s   show complete disklabel"
msgstr "   s      complete schijflabel weergeven"

#: fdisk/fdiskbsdlabel.c:139
msgid "   t   change a partition's filesystem id"
msgstr "   t      bestandssysteem-ID van partitie wijzigen"

#: fdisk/fdiskbsdlabel.c:140
msgid "   u   change units (cylinders/sectors)"
msgstr "   u      gebruikte eenheid wijzigen (cilinders/sectoren)"

#: fdisk/fdiskbsdlabel.c:141
msgid "   w   write disklabel to disk"
msgstr "   w      schijflabel naar schijf schrijven"

#: fdisk/fdiskbsdlabel.c:143
msgid "   x   link BSD partition to non-BSD partition"
msgstr "   x      BSD-partitie koppelen aan niet-BSD-partitie"

#: fdisk/fdiskbsdlabel.c:175
#, c-format
msgid "Partition %s has invalid starting sector 0.\n"
msgstr "Partitie %s heeft ongeldige beginsector 0.\n"

#: fdisk/fdiskbsdlabel.c:179
#, c-format
msgid "Reading disklabel of %s at sector %d.\n"
msgstr "Lezen van schijflabel van %s bij sector %d.\n"

#: fdisk/fdiskbsdlabel.c:189
#, c-format
msgid "There is no *BSD partition on %s.\n"
msgstr "Er is geen *BSD-partitie op %s.\n"

#: fdisk/fdiskbsdlabel.c:203
msgid "BSD disklabel command (m for help): "
msgstr "BSD-schijflabelopdracht (m voor hulp): "

#: fdisk/fdiskbsdlabel.c:283 fdisk/fdisk.c:2344 fdisk/fdisksgilabel.c:638
#: fdisk/fdisksunlabel.c:426
#, c-format
msgid "First %s"
msgstr "Eerste %s"

#: fdisk/fdiskbsdlabel.c:290 fdisk/fdisksunlabel.c:483
#, c-format
msgid "Last %s or +size or +sizeM or +sizeK"
msgstr "Laatste %s of +aantal of +aantalK of +aantalM"

#: fdisk/fdiskbsdlabel.c:317
#, c-format
msgid "type: %s\n"
msgstr "type: %s\n"

#: fdisk/fdiskbsdlabel.c:319
#, c-format
msgid "type: %d\n"
msgstr "type: %d\n"

#: fdisk/fdiskbsdlabel.c:320
#, c-format
msgid "disk: %.*s\n"
msgstr "schijf: %.*s\n"

#: fdisk/fdiskbsdlabel.c:321
#, c-format
msgid "label: %.*s\n"
msgstr "label: %.*s\n"

#: fdisk/fdiskbsdlabel.c:322
#, c-format
msgid "flags:"
msgstr "opties:"

#: fdisk/fdiskbsdlabel.c:324
#, c-format
msgid " removable"
msgstr " verwijderbaar"

#: fdisk/fdiskbsdlabel.c:326
#, c-format
msgid " ecc"
msgstr " ecc"

#: fdisk/fdiskbsdlabel.c:328
#, c-format
msgid " badsect"
msgstr " slechte_sectoren"

#: fdisk/fdiskbsdlabel.c:332
#, c-format
msgid "bytes/sector: %ld\n"
msgstr "bytes/sector: %ld\n"

#: fdisk/fdiskbsdlabel.c:333
#, c-format
msgid "sectors/track: %ld\n"
msgstr "sectoren/spoor: %ld\n"

#: fdisk/fdiskbsdlabel.c:334
#, c-format
msgid "tracks/cylinder: %ld\n"
msgstr "sporen/cilinder: %ld\n"

#: fdisk/fdiskbsdlabel.c:335
#, c-format
msgid "sectors/cylinder: %ld\n"
msgstr "sectoren/cilinder: %ld\n"

#: fdisk/fdiskbsdlabel.c:336
#, c-format
msgid "cylinders: %ld\n"
msgstr "cilinders: %ld\n"

#: fdisk/fdiskbsdlabel.c:337
#, c-format
msgid "rpm: %d\n"
msgstr "rpm: %d\n"

#: fdisk/fdiskbsdlabel.c:338
#, c-format
msgid "interleave: %d\n"
msgstr "tussenruimte: %d\n"

# let op: komt vaker voor
#: fdisk/fdiskbsdlabel.c:339
#, c-format
msgid "trackskew: %d\n"
msgstr "trackskew: %d\n"

# let op: komt vaker voor
#: fdisk/fdiskbsdlabel.c:340
#, c-format
msgid "cylinderskew: %d\n"
msgstr "cylinderskew: %d\n"

#: fdisk/fdiskbsdlabel.c:341
#, c-format
msgid "headswitch: %ld\t\t# milliseconds\n"
msgstr "overschakelen van kop: %ld\t# milliseconden\n"

#: fdisk/fdiskbsdlabel.c:343
#, c-format
msgid "track-to-track seek: %ld\t# milliseconds\n"
msgstr "spoor-tot-spoor 'seek': %ld\t# milliseconden\n"

#: fdisk/fdiskbsdlabel.c:345
#, c-format
msgid "drivedata: "
msgstr "schijfgegevens: "

#: fdisk/fdiskbsdlabel.c:354
#, c-format
msgid ""
"\n"
"%d partitions:\n"
msgstr ""
"\n"
"%d partities:\n"

#: fdisk/fdiskbsdlabel.c:355
#, c-format
msgid "#       start       end      size     fstype   [fsize bsize   cpg]\n"
msgstr "#       begin     einde   grootte   bsysteem   [grtte blgrt   cpg]\n"

#: fdisk/fdiskbsdlabel.c:404 fdisk/fdiskbsdlabel.c:407
#, c-format
msgid "Writing disklabel to %s.\n"
msgstr "Schrijven van schijflabel naar %s.\n"

#: fdisk/fdiskbsdlabel.c:419 fdisk/fdiskbsdlabel.c:421
#, c-format
msgid "%s contains no disklabel.\n"
msgstr "%s bevat geen schijflabel.\n"

#: fdisk/fdiskbsdlabel.c:426
msgid "Do you want to create a disklabel? (y/n) "
msgstr "Wilt u een schijflabel maken? (y/n) "

#: fdisk/fdiskbsdlabel.c:466
msgid "bytes/sector"
msgstr "bytes/sector"

#: fdisk/fdiskbsdlabel.c:467
msgid "sectors/track"
msgstr "sectoren/spoor"

#: fdisk/fdiskbsdlabel.c:468
msgid "tracks/cylinder"
msgstr "sporen/cilinder"

#: fdisk/fdiskbsdlabel.c:469 fdisk/fdisk.c:751 fdisk/fdisk.c:1605
#: fdisk/sfdisk.c:930
msgid "cylinders"
msgstr "cilinders"

#: fdisk/fdiskbsdlabel.c:476
msgid "sectors/cylinder"
msgstr "sectoren/cilinder"

#: fdisk/fdiskbsdlabel.c:480
#, c-format
msgid "Must be <= sectors/track * tracks/cylinder (default).\n"
msgstr "Moet <= sectoren/spoor * sporen/cilinder zijn.\n"

#: fdisk/fdiskbsdlabel.c:482
msgid "rpm"
msgstr "rpm"

#: fdisk/fdiskbsdlabel.c:483
msgid "interleave"
msgstr "tussenruimte"

#: fdisk/fdiskbsdlabel.c:484
msgid "trackskew"
msgstr "trackskew"

#: fdisk/fdiskbsdlabel.c:485
msgid "cylinderskew"
msgstr "cylinderskew"

#: fdisk/fdiskbsdlabel.c:486
msgid "headswitch"
msgstr "overschakelen van kop"

#: fdisk/fdiskbsdlabel.c:487
msgid "track-to-track seek"
msgstr "spoor-tot-spoor 'seek'"

#: fdisk/fdiskbsdlabel.c:528
#, c-format
msgid "Bootstrap: %sboot -> boot%s (%s): "
msgstr "Bootstrap: %sboot -> boot%s (%s): "

#: fdisk/fdiskbsdlabel.c:553
#, c-format
msgid "Bootstrap overlaps with disk label!\n"
msgstr "Bootstrap overlapt met schijflabel!\n"

#: fdisk/fdiskbsdlabel.c:574 fdisk/fdiskbsdlabel.c:576
#, c-format
msgid "Bootstrap installed on %s.\n"
msgstr "Bootstrap geïnstalleerd op %s.\n"

#: fdisk/fdiskbsdlabel.c:598
#, c-format
msgid "Partition (a-%c): "
msgstr "Partitie (a-%c): "

#: fdisk/fdiskbsdlabel.c:617 fdisk/fdisk.c:2507
#, c-format
msgid "The maximum number of partitions has been created\n"
msgstr "Het maximum aantal partities is aangemaakt.\n"

#: fdisk/fdiskbsdlabel.c:629
#, c-format
msgid "This partition already exists.\n"
msgstr "Deze partitie bestaat al.\n"

#: fdisk/fdiskbsdlabel.c:756
#, c-format
msgid "Warning: too many partitions (%d, maximum is %d).\n"
msgstr "Waarschuwing: te veel partities (%d, maximum is %d).\n"

#: fdisk/fdiskbsdlabel.c:804
#, c-format
msgid ""
"\n"
"Syncing disks.\n"
msgstr ""
"\n"
"Leegmaken van schijfbuffers...\n"

#: fdisk/fdisk.c:257
msgid ""
"Usage:\n"
" fdisk [options] <disk>    change partition table\n"
" fdisk [options] -l <disk> list partition table(s)\n"
" fdisk -s <partition>      give partition size(s) in blocks\n"
"\n"
"Options:\n"
" -b <size>             sector size (512, 1024, 2048 or 4096)\n"
" -c[=<mode>]           compatible mode: 'dos' or 'nondos' (default)\n"
" -h                    print this help text\n"
" -u[=<unit>]           dysplay units: 'cylinders' or 'sectors' (default)\n"
" -v                    print program version\n"
" -C <number>           specify the number of cylinders\n"
" -H <number>           specify the number of heads\n"
" -S <number>           specify the number of sectors per track\n"
"\n"
msgstr ""

#: fdisk/fdisk.c:274
#, c-format
msgid "Unable to open %s\n"
msgstr "Kan %s niet openen\n"

#: fdisk/fdisk.c:278
#, c-format
msgid "Unable to read %s\n"
msgstr "Kan %s niet lezen\n"

#: fdisk/fdisk.c:282
#, c-format
msgid "Unable to seek on %s\n"
msgstr "Kan geen 'seek' doen op %s\n"

#: fdisk/fdisk.c:286
#, c-format
msgid "Unable to write %s\n"
msgstr "Kan niet schrijven naar %s\n"

#: fdisk/fdisk.c:290
#, c-format
msgid "BLKGETSIZE ioctl failed on %s\n"
msgstr "ioctl(BLKGETSIZE) is mislukt op %s\n"

#: fdisk/fdisk.c:294
msgid "Unable to allocate any more memory\n"
msgstr "Kan geen geheugen meer reserveren\n"

#: fdisk/fdisk.c:297
msgid "Fatal error\n"
msgstr "Fatale fout\n"

#: fdisk/fdisk.c:396
msgid "   a   toggle a read only flag"
msgstr "   a      wel/niet als alleen-lezen instellen"

#: fdisk/fdisk.c:397 fdisk/fdisk.c:441
msgid "   b   edit bsd disklabel"
msgstr "   b      een BSD-schijflabel bewerken"

#: fdisk/fdisk.c:398
msgid "   c   toggle the mountable flag"
msgstr "   c      wel/niet als aankoppelbaar instellen"

#: fdisk/fdisk.c:399 fdisk/fdisk.c:418 fdisk/fdisk.c:443
msgid "   d   delete a partition"
msgstr "   d      een partitie verwijderen"

#: fdisk/fdisk.c:400 fdisk/fdisk.c:419 fdisk/fdisk.c:444
msgid "   l   list known partition types"
msgstr "   l      alle bekende partitietypen opsommen"

#: fdisk/fdisk.c:402 fdisk/fdisk.c:421 fdisk/fdisk.c:446
msgid "   n   add a new partition"
msgstr "   n      een nieuwe partitie toevoegen"

#: fdisk/fdisk.c:403 fdisk/fdisk.c:422 fdisk/fdisk.c:434 fdisk/fdisk.c:447
msgid "   o   create a new empty DOS partition table"
msgstr "   o      een nieuwe, lege DOS-partitietabel maken"

#: fdisk/fdisk.c:404 fdisk/fdisk.c:423 fdisk/fdisk.c:448 fdisk/fdisk.c:471
#: fdisk/fdisk.c:488 fdisk/fdisk.c:504 fdisk/fdisk.c:522
msgid "   p   print the partition table"
msgstr "   p      de partitietabel weergeven"

#: fdisk/fdisk.c:406 fdisk/fdisk.c:425 fdisk/fdisk.c:436 fdisk/fdisk.c:450
msgid "   s   create a new empty Sun disklabel"
msgstr "   s      een nieuw, leeg Sun-schijflabel maken"

#: fdisk/fdisk.c:407 fdisk/fdisk.c:426 fdisk/fdisk.c:451
msgid "   t   change a partition's system id"
msgstr "   t      systeem-ID van partitie wijzigen"

#: fdisk/fdisk.c:408 fdisk/fdisk.c:427 fdisk/fdisk.c:452
msgid "   u   change display/entry units"
msgstr "   u      weergave/invoer-eenheid wijzigen"

#: fdisk/fdisk.c:409 fdisk/fdisk.c:428 fdisk/fdisk.c:453 fdisk/fdisk.c:475
#: fdisk/fdisk.c:492 fdisk/fdisk.c:508 fdisk/fdisk.c:526
msgid "   v   verify the partition table"
msgstr "   v      de partitietabel controleren"

#: fdisk/fdisk.c:410 fdisk/fdisk.c:429 fdisk/fdisk.c:454 fdisk/fdisk.c:476
#: fdisk/fdisk.c:493 fdisk/fdisk.c:509 fdisk/fdisk.c:527
msgid "   w   write table to disk and exit"
msgstr "   w      de tabel naar schijf schrijven en afsluiten"

#: fdisk/fdisk.c:411 fdisk/fdisk.c:455
msgid "   x   extra functionality (experts only)"
msgstr "   x      extra functionaliteit (alleen voor experts)"

#: fdisk/fdisk.c:415
msgid "   a   select bootable partition"
msgstr "   a      opstartbare partitie selecteren"

#: fdisk/fdisk.c:416
msgid "   b   edit bootfile entry"
msgstr "   b      opstartbestand-item bewerken"

#: fdisk/fdisk.c:417
msgid "   c   select sgi swap partition"
msgstr "   c      SGI-wisselgeheugenpartitie selecteren"

#: fdisk/fdisk.c:440
msgid "   a   toggle a bootable flag"
msgstr "   a      wel/niet als opstartbaar instellen"

#: fdisk/fdisk.c:442
msgid "   c   toggle the dos compatibility flag"
msgstr "   c      wel/niet als DOS-compatibel instellen"

#: fdisk/fdisk.c:463
msgid "   a   change number of alternate cylinders"
msgstr "   a      aantal alternatieve cilinders wijzigen"

#: fdisk/fdisk.c:464 fdisk/fdisk.c:482 fdisk/fdisk.c:498 fdisk/fdisk.c:514
msgid "   c   change number of cylinders"
msgstr "   c      aantal cilinders wijzigen"

#: fdisk/fdisk.c:465 fdisk/fdisk.c:483 fdisk/fdisk.c:499 fdisk/fdisk.c:515
msgid "   d   print the raw data in the partition table"
msgstr "   d      ruwe gegevens van partitietabel weergeven"

#: fdisk/fdisk.c:466
msgid "   e   change number of extra sectors per cylinder"
msgstr "   e      aantal extra sectoren per cilinder wijzigen"

#: fdisk/fdisk.c:467 fdisk/fdisk.c:486 fdisk/fdisk.c:502 fdisk/fdisk.c:519
msgid "   h   change number of heads"
msgstr "   h      aantal koppen wijzigen"

#: fdisk/fdisk.c:468
msgid "   i   change interleave factor"
msgstr "   i      tussenruimtefactor wijzigen"

#: fdisk/fdisk.c:469
msgid "   o   change rotation speed (rpm)"
msgstr "   o      rotatiesnelheid wijzigen (rondjes per minuut)"

#: fdisk/fdisk.c:474 fdisk/fdisk.c:491 fdisk/fdisk.c:507 fdisk/fdisk.c:525
msgid "   s   change number of sectors/track"
msgstr "   s      aantal sectoren/spoor wijzigen"

#: fdisk/fdisk.c:477
msgid "   y   change number of physical cylinders"
msgstr "   y      aantal fysieke cilinders wijzigen"

#: fdisk/fdisk.c:481 fdisk/fdisk.c:497 fdisk/fdisk.c:513
msgid "   b   move beginning of data in a partition"
msgstr "   b      begin van gegevens in een partitie verplaatsen"

#: fdisk/fdisk.c:484 fdisk/fdisk.c:500 fdisk/fdisk.c:516
msgid "   e   list extended partitions"
msgstr "   e      uitgebreide partities weergeven"

#: fdisk/fdisk.c:485 fdisk/fdisk.c:501 fdisk/fdisk.c:518
msgid "   g   create an IRIX (SGI) partition table"
msgstr "   g      een nieuw, leeg IRIX(SGI)-schijflabel maken"

#: fdisk/fdisk.c:517
msgid "   f   fix partition order"
msgstr "   f      partitievolgorde repareren"

#: fdisk/fdisk.c:520
msgid "   i   change the disk identifier"
msgstr "   i      schijf-ID wijzigen"

#: fdisk/fdisk.c:646
#, c-format
msgid "You must set"
msgstr "U moet instellen:"

#: fdisk/fdisk.c:747
msgid "heads"
msgstr "koppen"

#: fdisk/fdisk.c:749 fdisk/fdisk.c:1605 fdisk/sfdisk.c:930
msgid "sectors"
msgstr "sectoren"

#: fdisk/fdisk.c:755
#, c-format
msgid ""
"%s%s.\n"
"You can do this from the extra functions menu.\n"
msgstr ""
"%s%s.\n"
"U kunt dit doen vanuit het menu met extra functies.\n"

#: fdisk/fdisk.c:756
msgid " and "
msgstr " en "

#: fdisk/fdisk.c:776
#, c-format
msgid ""
"\n"
"WARNING: The size of this disk is %d.%d TB (%llu bytes).\n"
"DOS partition table format can not be used on drives for volumes\n"
"larger than (%llu bytes) for %d-byte sectors. Use parted(1) and GUID \n"
"partition table format (GPT).\n"
"\n"
msgstr ""
"\n"
"WAARSCHUWING: De grootte van deze schijf is %d,%d TB (%llu bytes).\n"
"Een DOS-partitietabel is niet mogelijk op volumens die groter\n"
"zijn dan %llu bytes (bij sectoren van %d bytes).\n"
"Gebruik GNU parted(1) en een GUID-partitietabel (GPT).\n"
"\n"

#: fdisk/fdisk.c:794
#, c-format
msgid ""
"\n"
"The device presents a logical sector size that is smaller than\n"
"the physical sector size. Aligning to a physical sector (or optimal\n"
"I/O) size boundary is recommended, or performance may be impacted.\n"
msgstr ""
"\n"
"Op het apparaat is de logische sectorgrootte kleiner dan de fysieke.\n"
"Uitlijning op een fysieke sectorgrens (of optimale in-/uitvoergrootte)\n"
"wordt aangeraden, anders kunnen de prestaties er onder lijden.\n"

#: fdisk/fdisk.c:800
#, c-format
msgid ""
"\n"
"WARNING: DOS-compatible mode is deprecated. It's strongly recommended to\n"
"         switch off the mode (with command 'c')."
msgstr ""
"\n"
"WAARSCHUWING: De DOS-compatibele modus wordt sterk ontraden.\n"
"              Schakel de modus uit met opdracht 'c'."

#: fdisk/fdisk.c:805
#, c-format
msgid ""
"\n"
"WARNING: cylinders as display units are deprecated. Use command 'u' to\n"
"         change units to sectors.\n"
msgstr ""
"\n"
"WAARSCHUWING: De weergave-eenheid 'cilinders' wordt ontraden.\n"
"              Gebruik 'u' om de eenheid op 'sectoren' in te stellen.\n"

#: fdisk/fdisk.c:824
#, c-format
msgid "Bad offset in primary extended partition\n"
msgstr "Ongeldige plaats in primaire uitgebreide partitie\n"

#: fdisk/fdisk.c:838
#, c-format
msgid ""
"Warning: omitting partitions after #%d.\n"
"They will be deleted if you save this partition table.\n"
msgstr ""
"Waarschuwing: partities na #%d worden genegeerd.\n"
"Ze zullen worden *verwijderd* als u deze partitietabel opslaat.\n"

#: fdisk/fdisk.c:857
#, c-format
msgid "Warning: extra link pointer in partition table %d\n"
msgstr "Waarschuwing: extra koppelingsverwijzer in partitietabel %d\n"

#: fdisk/fdisk.c:865
#, c-format
msgid "Warning: ignoring extra data in partition table %d\n"
msgstr "Waarschuwing: extra gegevens in partitietabel %d worden genegeerd\n"

#: fdisk/fdisk.c:898
#, c-format
msgid "omitting empty partition (%d)\n"
msgstr "lege partitie (%d) wordt weggelaten\n"

#: fdisk/fdisk.c:917
#, c-format
msgid "Disk identifier: 0x%08x\n"
msgstr "Schijf-ID: 0x%08x\n"

#: fdisk/fdisk.c:926
#, c-format
msgid "New disk identifier (current 0x%08x): "
msgstr "Nieuw schijf-ID (huidige is 0x%08x): "

#: fdisk/fdisk.c:945
#, c-format
msgid ""
"Building a new DOS disklabel with disk identifier 0x%08x.\n"
"Changes will remain in memory only, until you decide to write them.\n"
"After that, of course, the previous content won't be recoverable.\n"
"\n"
msgstr ""
"Er wordt een nieuwe DOS-partitietabel aangemaakt met schijf-ID 0x%08x.\n"
"Wijzigingen vinden enkel en alleen in het geheugen plaats, totdat u besluit ze\n"
"weg te schrijven.  Daarna is de oude inhoud uiteraard niet meer herstelbaar.\n"
"\n"

#: fdisk/fdisk.c:1021
#, c-format
msgid "Note: sector size is %d (not %d)\n"
msgstr "Let op: sectorgrootte is %d (niet %d)\n"

#: fdisk/fdisk.c:1219
#, c-format
msgid "You will not be able to write the partition table.\n"
msgstr "U zult geen partitietabel kunnen wegschrijven.\n"

#: fdisk/fdisk.c:1251
#, c-format
msgid ""
"This disk has both DOS and BSD magic.\n"
"Give the 'b' command to go to BSD mode.\n"
msgstr ""
"Deze schijf bevat zowel DOS- als BSD-vingerafdrukken.\n"
"Geef de opdracht 'b' om naar BSD-modus te gaan.\n"

#: fdisk/fdisk.c:1261
#, c-format
msgid "Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel\n"
msgstr "Apparaat bevat geen geldig DOS-, Sun-, SGI- of OSF-schijflabel.\n"

#: fdisk/fdisk.c:1278
#, c-format
msgid "Internal error\n"
msgstr "Interne fout\n"

#: fdisk/fdisk.c:1288
#, c-format
msgid "Ignoring extra extended partition %d\n"
msgstr "Extra uitgebreide partitie %d wordt genegeerd.\n"

#: fdisk/fdisk.c:1300
#, c-format
msgid "Warning: invalid flag 0x%04x of partition table %d will be corrected by w(rite)\n"
msgstr ""
"Waarschuwing: onjuiste optie 0x%04x van partitietabel %d zal\n"
"worden gecorrigeerd bij het schrijven.\n"

#: fdisk/fdisk.c:1326
#, c-format
msgid ""
"\n"
"got EOF thrice - exiting..\n"
msgstr ""
"\n"
"driemaal EOF ontvangen -- afsluiting...\n"

#: fdisk/fdisk.c:1365
msgid "Hex code (type L to list codes): "
msgstr "Hex-code (typ L om alle codes te tonen): "

#: fdisk/fdisk.c:1398
#, c-format
msgid "%s (%u-%u, default %u): "
msgstr "%s (%u-%u, standaard %u): "

#: fdisk/fdisk.c:1465
#, c-format
msgid "Unsupported suffix: '%s'.\n"
msgstr "Onbekend achtervoegsel: '%s'.\n"

#: fdisk/fdisk.c:1466
#, c-format
msgid ""
"Supported: 10^N: KB (KiloByte), MB (MegaByte), GB (GigaByte)\n"
"            2^N: K  (KibiByte), M  (MebiByte), G  (GibiByte)\n"
msgstr ""
"Mogelijk zijn: 10^N: KB (kilobyte), MB (Megabyte), GB (Gigabyte)\n"
"                2^N: K  (Kibibyte), M  (Mebibyte), G  (Gibibyte)\n"

#: fdisk/fdisk.c:1494
#, c-format
msgid "Using default value %u\n"
msgstr "Standaardwaarde %u wordt gebruikt\n"

#: fdisk/fdisk.c:1498
#, c-format
msgid "Value out of range.\n"
msgstr "Waarde ligt buiten bereik.\n"

#: fdisk/fdisk.c:1523
msgid "Partition number"
msgstr "Partitienummer"

#: fdisk/fdisk.c:1534
#, c-format
msgid "Warning: partition %d has empty type\n"
msgstr "Waarschuwing: partitie %d heeft een lege typeaanduiding\n"

#: fdisk/fdisk.c:1561 fdisk/fdisk.c:1590
#, c-format
msgid "Selected partition %d\n"
msgstr "Geselecteerde partitie is %d\n"

#: fdisk/fdisk.c:1564
#, c-format
msgid "No partition is defined yet!\n"
msgstr "Er zijn nog geen partities gedefinieerd!\n"

#: fdisk/fdisk.c:1593
#, c-format
msgid "All primary partitions have been defined already!\n"
msgstr "Alle primaire partities zijn al gedefinieerd!\n"

#: fdisk/fdisk.c:1603
msgid "cylinder"
msgstr "cilinder"

#: fdisk/fdisk.c:1603
msgid "sector"
msgstr "sector"

#: fdisk/fdisk.c:1614
#, c-format
msgid "Changing display/entry units to cylinders (DEPRECATED!)\n"
msgstr "Eenheid voor weergave/invoer is veranderd naar cilinders (VEROUDERD!)\n"

#: fdisk/fdisk.c:1616
#, c-format
msgid "Changing display/entry units to sectors\n"
msgstr "Eenheid voor weergave/invoer is veranderd naar sectoren\n"

#: fdisk/fdisk.c:1626
#, c-format
msgid "WARNING: Partition %d is an extended partition\n"
msgstr "WAARSCHUWING: Partitie %d is een uitgebreide partitie\n"

#: fdisk/fdisk.c:1636
#, c-format
msgid "DOS Compatibility flag is set (DEPRECATED!)\n"
msgstr "DOS-compatibiliteit is aangezet (VEROUDERD!)\n"

#: fdisk/fdisk.c:1638
#, c-format
msgid "DOS Compatibility flag is not set\n"
msgstr "DOS-compatibiliteit is uitgezet\n"

#: fdisk/fdisk.c:1739
#, c-format
msgid "Partition %d does not exist yet!\n"
msgstr "Partitie %d bestaat nog niet!\n"

#: fdisk/fdisk.c:1744
#, c-format
msgid ""
"Type 0 means free space to many systems\n"
"(but not to Linux). Having partitions of\n"
"type 0 is probably unwise. You can delete\n"
"a partition using the `d' command.\n"
msgstr ""
"Type 0 betekent op veel systemen 'vrije ruimte'\n"
"(maar niet op Linux).  Het is waarschijnlijk niet\n"
"verstandig om partities te hebben van type 0.\n"
"Een partitie verwijderen kan met de opdracht 'd'.\n"

#: fdisk/fdisk.c:1753
#, c-format
msgid ""
"You cannot change a partition into an extended one or vice versa\n"
"Delete it first.\n"
msgstr ""
"U kunt een gewone partitie niet veranderen in een uitgebreide of andersom.\n"
"Verwijder de partitie eerst.\n"

#: fdisk/fdisk.c:1762
#, c-format
msgid ""
"Consider leaving partition 3 as Whole disk (5),\n"
"as SunOS/Solaris expects it and even Linux likes it.\n"
"\n"
msgstr ""
"Overweeg om partitie 3 als Gehele Schijf (5) te laten, zoals\n"
"SunOS/Solaris het verwacht en ook Linux het het liefst heeft.\n"
"\n"

#: fdisk/fdisk.c:1768
#, c-format
msgid ""
"Consider leaving partition 9 as volume header (0),\n"
"and partition 11 as entire volume (6), as IRIX expects it.\n"
"\n"
msgstr ""
"Overweeg om partitie 9 als volumenkop (0) te laten, en\n"
"partitie 11 als geheel volumen (6), zoals IRIX het verwacht.\n"
"\n"

#: fdisk/fdisk.c:1785
#, c-format
msgid "Changed system type of partition %d to %x (%s)\n"
msgstr "Systeemtype van partitie %d is veranderd naar %x (%s)\n"

#: fdisk/fdisk.c:1788
#, c-format
msgid "System type of partition %d is unchanged: %x (%s)\n"
msgstr "Systeemtype van partitie %d is onveranderd: %x (%s)\n"

#: fdisk/fdisk.c:1843
#, c-format
msgid "Partition %d has different physical/logical beginnings (non-Linux?):\n"
msgstr "Partitie %d heeft verschillende fysieke/logische beginpunten (niet-Linux?):\n"

#: fdisk/fdisk.c:1845 fdisk/fdisk.c:1853 fdisk/fdisk.c:1862 fdisk/fdisk.c:1872
#, c-format
msgid "     phys=(%d, %d, %d) "
msgstr "     fysiek=(%d, %d, %d)  "

#: fdisk/fdisk.c:1846 fdisk/fdisk.c:1854
#, c-format
msgid "logical=(%d, %d, %d)\n"
msgstr "logisch=(%d, %d, %d)\n"

#: fdisk/fdisk.c:1851
#, c-format
msgid "Partition %d has different physical/logical endings:\n"
msgstr "Partitie %d heeft verschillende fysieke/logische eindpunten:\n"

#: fdisk/fdisk.c:1860
#, c-format
msgid "Partition %i does not start on cylinder boundary:\n"
msgstr "Partitie %i begint niet op een cilindergrens:\n"

#: fdisk/fdisk.c:1863
#, c-format
msgid "should be (%d, %d, 1)\n"
msgstr "moet zijn (%d, %d, 1)\n"

#: fdisk/fdisk.c:1869
#, c-format
msgid "Partition %i does not end on cylinder boundary.\n"
msgstr "Partitie %i eindigt niet op een cilindergrens.\n"

#: fdisk/fdisk.c:1873
#, c-format
msgid "should be (%d, %d, %d)\n"
msgstr "moet zijn (%d, %d, %d)\n"

#: fdisk/fdisk.c:1883
#, c-format
msgid "Partition %i does not start on physical sector boundary.\n"
msgstr "Partitie %i begint niet op een fysieke sectorgrens:\n"

#: fdisk/fdisk.c:1893
#, c-format
msgid ""
"\n"
"Disk %s: %ld MB, %lld bytes\n"
msgstr ""
"\n"
"Schijf %s: %ld MB, %lld bytes\n"

#: fdisk/fdisk.c:1897
#, c-format
msgid ""
"\n"
"Disk %s: %ld.%ld GB, %lld bytes\n"
msgstr ""
"\n"
"Schijf %s: %ld.%ld GB, %lld bytes\n"

#: fdisk/fdisk.c:1900
#, c-format
msgid "%d heads, %llu sectors/track, %d cylinders"
msgstr "%d koppen, %llu sectoren/spoor, %d cilinders"

#: fdisk/fdisk.c:1903
#, c-format
msgid ", total %llu sectors"
msgstr ", totaal %llu sectoren"

#: fdisk/fdisk.c:1906
#, c-format
msgid "Units = %s of %d * %d = %d bytes\n"
msgstr ""
"Eenheid = %s van %d * %d = %d bytes\n"
"\n"

#: fdisk/fdisk.c:1910
#, c-format
msgid "Sector size (logical/physical): %u bytes / %lu bytes\n"
msgstr "Sectorgrootte (logischl/fysiek): %u bytes / %lu bytes\n"

#: fdisk/fdisk.c:1912
#, c-format
msgid "I/O size (minimum/optimal): %lu bytes / %lu bytes\n"
msgstr "in-/uitvoergrootte (minimaal/optimaal): %lu bytes / %lu bytes\n"

#: fdisk/fdisk.c:1915
#, c-format
msgid "Alignment offset: %lu bytes\n"
msgstr "Uitlijningspositie: %lu bytes\n"

#: fdisk/fdisk.c:2024
#, c-format
msgid ""
"Nothing to do. Ordering is correct already.\n"
"\n"
msgstr ""
"Er hoeft niets gedaan te worden.  De ordening is al goed.\n"
"\n"

#: fdisk/fdisk.c:2052
#, c-format
msgid "Done.\n"
msgstr "Voltooid.\n"

#: fdisk/fdisk.c:2080
#, c-format
msgid ""
"This doesn't look like a partition table\n"
"Probably you selected the wrong device.\n"
"\n"
msgstr ""
"Dit lijkt niet op een partitietabel.\n"
"Waarschijnlijk koos u een verkeerd apparaat.\n"
"\n"

#: fdisk/fdisk.c:2093
#, c-format
msgid "%*s Boot      Start         End      Blocks   Id  System\n"
msgstr "%*s Opstart   Begin       Einde     Blokken   ID  Systeem\n"

#: fdisk/fdisk.c:2094 fdisk/fdisksgilabel.c:210 fdisk/fdisksunlabel.c:598
msgid "Device"
msgstr "Apparaat"

#: fdisk/fdisk.c:2132
#, c-format
msgid ""
"\n"
"Partition table entries are not in disk order\n"
msgstr ""
"\n"
"Partitietabel-items liggen niet in schijfvolgorde.\n"

#: fdisk/fdisk.c:2142
#, c-format
msgid ""
"\n"
"Disk %s: %d heads, %llu sectors, %d cylinders\n"
"\n"
msgstr ""
"\n"
"Schijf %s: %d koppen, %llu sectoren, %d cilinders\n"
"\n"

#: fdisk/fdisk.c:2144
#, c-format
msgid "Nr AF  Hd Sec  Cyl  Hd Sec  Cyl     Start      Size ID\n"
msgstr "Nr AF Kop Sec  Cil Kop Sec  Cil      Begin    Grootte ID\n"

#: fdisk/fdisk.c:2192
#, c-format
msgid "Warning: partition %d contains sector 0\n"
msgstr "Waarschuwing: partitie %d bevat sector 0\n"

#: fdisk/fdisk.c:2195
#, c-format
msgid "Partition %d: head %d greater than maximum %d\n"
msgstr "Partitie %d: kopnummer %d is groter dan maximum %d\n"

#: fdisk/fdisk.c:2198
#, c-format
msgid "Partition %d: sector %d greater than maximum %llu\n"
msgstr "Partitie %d: sectornummer %d is groter dan maximum %llu\n"

#: fdisk/fdisk.c:2201
#, c-format
msgid "Partitions %d: cylinder %d greater than maximum %d\n"
msgstr "Partities %d: cilindernummer %d is groter dan maximum %d\n"

#: fdisk/fdisk.c:2205
#, c-format
msgid "Partition %d: previous sectors %d disagrees with total %d\n"
msgstr "Partitie %d: einde van vorige partitie in sectoren %d verschilt van totaal %d\n"

#: fdisk/fdisk.c:2239
#, c-format
msgid "Warning: bad start-of-data in partition %d\n"
msgstr "Waarschuwing: ongeldige start-van-gegevens in partitie %d\n"

#: fdisk/fdisk.c:2247
#, c-format
msgid "Warning: partition %d overlaps partition %d.\n"
msgstr "Waarschuwing: partitie %d overlapt partitie %d\n"

#: fdisk/fdisk.c:2267
#, c-format
msgid "Warning: partition %d is empty\n"
msgstr "Waarschuwing: partitie %d is leeg\n"

#: fdisk/fdisk.c:2272
#, c-format
msgid "Logical partition %d not entirely in partition %d\n"
msgstr "Logische partitie %d ligt niet geheel binnen partitie %d\n"

#: fdisk/fdisk.c:2278
#, c-format
msgid "Total allocated sectors %llu greater than the maximum %llu\n"
msgstr "Totaal aantal gereserveerde sectoren %llu is groter dan maximum %llu\n"

#: fdisk/fdisk.c:2281
#, c-format
msgid "Remaining %lld unallocated %d-byte sectors\n"
msgstr "Er resteren %lld niet-gereserveerde %d-byte sectoren\n"

#: fdisk/fdisk.c:2317 fdisk/fdisksgilabel.c:620 fdisk/fdisksunlabel.c:411
#, c-format
msgid "Partition %d is already defined.  Delete it before re-adding it.\n"
msgstr ""
"Partitie %d is al gedefinieerd.  Verwijder deze eerst,\n"
"en voeg hem dan opnieuw toe.\n"

#: fdisk/fdisk.c:2362
#, c-format
msgid "Sector %llu is already allocated\n"
msgstr "Sector %llu is al gereserveerd\n"

#: fdisk/fdisk.c:2398
#, c-format
msgid "No free sectors available\n"
msgstr "Geen vrije sectoren beschikbaar\n"

#: fdisk/fdisk.c:2409
#, c-format
msgid "Last %1$s, +%2$s or +size{K,M,G}"
msgstr "Laatste %s, +%s of +grootte{K,M,G}"

#: fdisk/fdisk.c:2486
#, c-format
msgid ""
"\tSorry - this fdisk cannot handle AIX disk labels.\n"
"\tIf you want to add DOS-type partitions, create\n"
"\ta new empty DOS partition table first. (Use o.)\n"
"\tWARNING: This will destroy the present disk contents.\n"
msgstr ""
"    Sorry -- deze fdisk ondersteunt geen AIX-schijflabels.\n"
"    Als u partities van het DOS-type wilt toevoegen, maak dan\n"
"    eerst een nieuwe, lege DOS-partitietabel.  (Gebruik 'o'.)\n"
"    WAARSCHUWING: Dit zal de huidige schijfinhoud wissen.\n"

#: fdisk/fdisk.c:2495
#, c-format
msgid ""
"\tSorry - this fdisk cannot handle Mac disk labels.\n"
"\tIf you want to add DOS-type partitions, create\n"
"\ta new empty DOS partition table first. (Use o.)\n"
"\tWARNING: This will destroy the present disk contents.\n"
msgstr ""
"    Sorry -- deze fdisk ondersteunt geen Mac-schijflabels.\n"
"    Als u partities van het DOS-type wilt toevoegen, maak dan\n"
"    eerst een nieuwe, lege DOS-partitietabel.  (Gebruik 'o'.)\n"
"    WAARSCHUWING: Dit zal de huidige schijfinhoud wissen.\n"

#: fdisk/fdisk.c:2515
#, c-format
msgid "You must delete some partition and add an extended partition first\n"
msgstr ""
"U dient eerst een partitie te verwijderen\n"
"en een uitgebreide partitie toe te voegen.\n"

#: fdisk/fdisk.c:2518
#, c-format
msgid "All logical partitions are in use\n"
msgstr "Alle logische partities zijn in gebruik.\n"

#: fdisk/fdisk.c:2519
#, c-format
msgid "Adding a primary partition\n"
msgstr "Een primaire partitie wordt toegevoegd.\n"

#: fdisk/fdisk.c:2524
#, c-format
msgid ""
"Command action\n"
"   %s\n"
"   p   primary partition (1-4)\n"
msgstr ""
"Opdracht  Actie\n"
"   %s\n"
"   p      primaire partitie (1-4)\n"

#: fdisk/fdisk.c:2526
msgid "l   logical (5 or over)"
msgstr "l      logische partitie (5 of hoger)"

#: fdisk/fdisk.c:2526
msgid "e   extended"
msgstr "e      uitgebreide partitie"

#: fdisk/fdisk.c:2545
#, c-format
msgid "Invalid partition number for type `%c'\n"
msgstr "Onjuist partitienummer voor type '%c'\n"

#: fdisk/fdisk.c:2581
#, c-format
msgid ""
"The partition table has been altered!\n"
"\n"
msgstr ""
"De partitietabel is gewijzigd!\n"
"\n"

#: fdisk/fdisk.c:2594
#, c-format
msgid "Calling ioctl() to re-read partition table.\n"
msgstr "Aanroepen van ioctl() om partitietabel opnieuw in te lezen...\n"

#: fdisk/fdisk.c:2603
#, c-format
msgid ""
"\n"
"WARNING: Re-reading the partition table failed with error %d: %s.\n"
"The kernel still uses the old table. The new table will be used at\n"
"the next reboot or after you run partprobe(8) or kpartx(8)\n"
msgstr ""
"\n"
"WAARSCHUWING: Opnieuw inlezen van partitietabel is mislukt met fout %d: %s.\n"
"De kernel gebruikt nog de oude tabel.  De nieuwe tabel wordt alleen na\n"
"opnieuw opstarten gebruikt, of na uitvoeren van partprobe(8) of kpartx(8).\n"

#: fdisk/fdisk.c:2611
#, c-format
msgid ""
"\n"
"WARNING: If you have created or modified any DOS 6.x\n"
"partitions, please see the fdisk manual page for additional\n"
"information.\n"
msgstr ""
"\n"
"WAARSCHUWING: Als u DOS-6.x-partities gemaakt of gewijzigd hebt,\n"
"raadpleeg dan het fdisk-handboek voor meer informatie.\n"

#: fdisk/fdisk.c:2617
#, c-format
msgid ""
"\n"
"Error closing file\n"
msgstr ""
"\n"
"Fout bij sluiten van bestand\n"

#: fdisk/fdisk.c:2621
#, c-format
msgid "Syncing disks.\n"
msgstr "Leegmaken van schijfbuffers...\n"

#: fdisk/fdisk.c:2668
#, c-format
msgid "Partition %d has no data area\n"
msgstr "Partitie %d heeft geen gegevensgebied\n"

#: fdisk/fdisk.c:2697
msgid "New beginning of data"
msgstr "Nieuw begin van gegevens"

#: fdisk/fdisk.c:2713
msgid "Expert command (m for help): "
msgstr "Expertopdracht (m voor hulp): "

#: fdisk/fdisk.c:2726
msgid "Number of cylinders"
msgstr "Aantal cilinders"

#: fdisk/fdisk.c:2751
msgid "Number of heads"
msgstr "Aantal koppen"

#: fdisk/fdisk.c:2778
msgid "Number of sectors"
msgstr "Aantal sectoren"

#: fdisk/fdisk.c:2780
#, c-format
msgid "Warning: setting sector offset for DOS compatiblity\n"
msgstr "Waarschuwing: sectorplaats wordt ingesteld voor DOS-compatibiliteit\n"

#: fdisk/fdisk.c:2839
#, c-format
msgid ""
"\n"
"WARNING: GPT (GUID Partition Table) detected on '%s'! The util fdisk doesn't support GPT. Use GNU Parted.\n"
"\n"
msgstr ""
"\n"
"Waarschuwing: GPT (GUID-partitietabel) gevonden op '%s'!\n"
"Het programma 'fdisk' ondersteunt GPT niet.  Gebruik GNU 'parted'.\n"
"\n"

#: fdisk/fdisk.c:2861
#, c-format
msgid "Disk %s doesn't contain a valid partition table\n"
msgstr "Schijf %s bevat geen geldige partitietabel\n"

#: fdisk/fdisk.c:2872
#, c-format
msgid "Cannot open %s\n"
msgstr "kan %s niet openen\n"

#: fdisk/fdisk.c:2891 fdisk/sfdisk.c:2608
#, c-format
msgid "cannot open %s\n"
msgstr "kan %s niet openen\n"

#: fdisk/fdisk.c:2911
#, c-format
msgid "%c: unknown command\n"
msgstr "%c: onbekende opdracht\n"

#: fdisk/fdisk.c:2986
#, c-format
msgid "This kernel finds the sector size itself - -b option ignored\n"
msgstr "Deze kernel vindt zelf de sectorgrootte -- optie '-b' wordt genegeerd\n"

#: fdisk/fdisk.c:2990
#, c-format
msgid "Warning: the -b (set sector size) option should be used with one specified device\n"
msgstr ""
"Waarschuwing: optie '-b' (sectorgrootte instellen) dient met\n"
"slechts één apparaat gebruikt te worden.\n"

#: fdisk/fdisk.c:3050
#, c-format
msgid "Detected an OSF/1 disklabel on %s, entering disklabel mode.\n"
msgstr "OSF/1-schijflabel gevonden op %s; overgegaan in schijflabelmodus.\n"

#: fdisk/fdisk.c:3060
msgid "Command (m for help): "
msgstr "Opdracht (m voor hulp): "

#: fdisk/fdisk.c:3076
#, c-format
msgid ""
"\n"
"The current boot file is: %s\n"
msgstr ""
"\n"
"Het huidige opstartbestand is: %s\n"

#: fdisk/fdisk.c:3078
msgid "Please enter the name of the new boot file: "
msgstr "Geef de naam van het nieuwe opstartbestand: "

#: fdisk/fdisk.c:3080
#, c-format
msgid "Boot file unchanged\n"
msgstr "Opstartbestand blijft ongewijzigd.\n"

#: fdisk/fdisk.c:3153
#, c-format
msgid ""
"\n"
"\tSorry, no experts menu for SGI partition tables available.\n"
"\n"
msgstr ""
"\n"
"  Sorry, het expertsmenu is niet beschikbaar voor SGI-partitietabellen.\n"
"\n"

#: fdisk/fdiskmaclabel.c:30
msgid ""
"\n"
"\tThere is a valid Mac label on this disk.\n"
"\tUnfortunately fdisk(1) cannot handle these disks.\n"
"\tUse either pdisk or parted to modify the partition table.\n"
"\tNevertheless some advice:\n"
"\t1. fdisk will destroy its contents on write.\n"
"\t2. Be sure that this disk is NOT a still vital\n"
"\t   part of a volume group. (Otherwise you may\n"
"\t   erase the other disks as well, if unmirrored.)\n"
msgstr ""
"\n"
"    Er staat een geldig Mac-label op deze schijf.\n"
"    Helaas ondersteunt 'fdisk' dit type label niet.\n"
"    Gebruik 'pdisk' of 'parted' om de partitietabel aan te passen.\n"
"    Toch wat advies:\n"
"    1. Bij schrijven zal fdisk de inhoud ervan WISSEN.\n"
"    2. Controleer dat deze schijf ECHT NIET nog deel uitmaakt\n"
"       van een volumengroep -- anders wist u mogelijk de andere\n"
"       schijven ook, als er geen mirror is.\n"

#: fdisk/fdisksgilabel.c:81
msgid "SGI volhdr"
msgstr "SGI volhdr"

#: fdisk/fdisksgilabel.c:82
msgid "SGI trkrepl"
msgstr "SGI trkrepl"

#: fdisk/fdisksgilabel.c:83
msgid "SGI secrepl"
msgstr "SGI secrepl"

#: fdisk/fdisksgilabel.c:84
msgid "SGI raw"
msgstr "SGI ruw"

#: fdisk/fdisksgilabel.c:85
msgid "SGI bsd"
msgstr "SGI bsd"

#: fdisk/fdisksgilabel.c:86
msgid "SGI sysv"
msgstr "SGI sysv"

#: fdisk/fdisksgilabel.c:87
msgid "SGI volume"
msgstr "SGI volumen"

#: fdisk/fdisksgilabel.c:88
msgid "SGI efs"
msgstr "SGI efs"

#: fdisk/fdisksgilabel.c:89
msgid "SGI lvol"
msgstr "SGI lvol"

#: fdisk/fdisksgilabel.c:90
msgid "SGI rlvol"
msgstr "SGI rlvol"

#: fdisk/fdisksgilabel.c:91
msgid "SGI xfs"
msgstr "SGI xfs"

#: fdisk/fdisksgilabel.c:92
msgid "SGI xfslog"
msgstr "SGI xfslog"

#: fdisk/fdisksgilabel.c:93
msgid "SGI xlv"
msgstr "SGI xlv"

#: fdisk/fdisksgilabel.c:94
msgid "SGI xvm"
msgstr "SGI xvm"

#: fdisk/fdisksgilabel.c:95 fdisk/fdisksunlabel.c:50
msgid "Linux swap"
msgstr "Linux wisselgeheugen"

#: fdisk/fdisksgilabel.c:96 fdisk/fdisksunlabel.c:51
msgid "Linux native"
msgstr "Linux native"

#: fdisk/fdisksgilabel.c:97 fdisk/fdisksunlabel.c:52 fdisk/i386_sys_types.c:63
msgid "Linux LVM"
msgstr "Linux LVM"

#: fdisk/fdisksgilabel.c:98
msgid "Linux RAID"
msgstr "Linux RAID"

#: fdisk/fdisksgilabel.c:151
#, c-format
msgid "According to MIPS Computer Systems, Inc the Label must not contain more than 512 bytes\n"
msgstr "Volgens 'MIPS Computer Systems' mag het label niet meer dan 512 bytes bevatten.\n"

#: fdisk/fdisksgilabel.c:170
#, c-format
msgid "Detected sgi disklabel with wrong checksum.\n"
msgstr "SGI-schijflabel gevonden met foutieve controlesom.\n"

#: fdisk/fdisksgilabel.c:188
#, c-format
msgid ""
"\n"
"Disk %s (SGI disk label): %d heads, %llu sectors\n"
"%d cylinders, %d physical cylinders\n"
"%d extra sects/cyl, interleave %d:1\n"
"%s\n"
"Units = %s of %d * %d bytes\n"
"\n"
msgstr ""
"\n"
"Schijf %s (SGI-schijflabel): %d koppen, %llu sectoren\n"
"%d cilinders, %d fysieke cilinders\n"
"%d extra sectoren/cilinder, tussenruimte %d:1\n"
"%s\n"
"Eenheid = %s van %d * %d bytes\n"
"\n"

#: fdisk/fdisksgilabel.c:201
#, c-format
msgid ""
"\n"
"Disk %s (SGI disk label): %d heads, %llu sectors, %d cylinders\n"
"Units = %s of %d * %d bytes\n"
"\n"
msgstr ""
"\n"
"Schijf %s (SGI-schijflabel): %d koppen, %llu sectoren, %d cilinders\n"
"Eenheid = %s van %d * %d bytes\n"
"\n"

#: fdisk/fdisksgilabel.c:208
#, c-format
msgid ""
"----- partitions -----\n"
"Pt# %*s  Info     Start       End   Sectors  Id  System\n"
msgstr ""
"----- Partities -----\n"
"Pt# %*s  Info     Begin     Einde  Sectoren  ID  Systeem\n"

#: fdisk/fdisksgilabel.c:230
#, c-format
msgid ""
"----- Bootinfo -----\n"
"Bootfile: %s\n"
"----- Directory Entries -----\n"
msgstr ""
"----- Opstartinfo -----\n"
"Opstartbestand: %s\n"
"----- Mapingangen -----\n"

#: fdisk/fdisksgilabel.c:238
#, c-format
msgid "%2d: %-10s sector%5u size%8u\n"
msgstr "%2d: %-10s sector%5u grootte%8u\n"

#: fdisk/fdisksgilabel.c:292
#, c-format
msgid ""
"\n"
"Invalid Bootfile!\n"
"\tThe bootfile must be an absolute non-zero pathname,\n"
"\te.g. \"/unix\" or \"/unix.save\".\n"
msgstr ""
"\n"
"Ongeldig opstartbestand!\n"
"    Het opstartbestand moet een absolute, niet-nul padnaam zijn,\n"
"    zoals \"/unix\" of \"/unix.save\".\n"

#: fdisk/fdisksgilabel.c:298
#, c-format
msgid ""
"\n"
"\tName of Bootfile too long:  16 bytes maximum.\n"
msgstr ""
"\n"
"    Naam van opstartbestand is te lang: maximaal 16 bytes.\n"

#: fdisk/fdisksgilabel.c:303
#, c-format
msgid ""
"\n"
"\tBootfile must have a fully qualified pathname.\n"
msgstr ""
"\n"
"    Opstartbestand moet een volledig aangegeven padnaam hebben.\n"

#: fdisk/fdisksgilabel.c:310
#, c-format
msgid ""
"\n"
"\tBe aware, that the bootfile is not checked for existence.\n"
"\tSGI's default is \"/unix\" and for backup \"/unix.save\".\n"
msgstr ""
"\n"
"    Let op: er niet wordt gecontroleerd of het opstartbestand bestaat.\n"
"    SGI's standaard is \"/unix\" en voor backup \"/unix.save\".\n"

#: fdisk/fdisksgilabel.c:336
#, c-format
msgid ""
"\n"
"\tBootfile is changed to \"%s\".\n"
msgstr ""
"\n"
"    Opstartbestand is veranderd naar \"%s\".\n"

#: fdisk/fdisksgilabel.c:426
#, c-format
msgid "More than one entire disk entry present.\n"
msgstr "Er is meer dan één schijfingang aanwezig.\n"

#: fdisk/fdisksgilabel.c:433 fdisk/fdisksunlabel.c:383
#, c-format
msgid "No partitions defined\n"
msgstr "Geen partities gedefinieerd\n"

#: fdisk/fdisksgilabel.c:439
#, c-format
msgid "IRIX likes when Partition 11 covers the entire disk.\n"
msgstr "IRIX houdt ervan dat partitie 11 de gehele schijf beslaat.\n"

#: fdisk/fdisksgilabel.c:441
#, c-format
msgid ""
"The entire disk partition should start at block 0,\n"
"not at diskblock %d.\n"
msgstr ""
"De gehele-schijfpartitie moet beginnen bij blok 0,\n"
"niet bij schijfblok %d.\n"

#: fdisk/fdisksgilabel.c:447
#, c-format
msgid ""
"The entire disk partition is only %d diskblock large,\n"
"but the disk is %d diskblocks long.\n"
msgstr ""
"De gehele-schijfpartitie is slechts %d schijfblokken groot,\n"
"maar de schijf is %d schijfblokken.\n"

#: fdisk/fdisksgilabel.c:453
#, c-format
msgid "One Partition (#11) should cover the entire disk.\n"
msgstr "Eén partitie (#11) moet de gehele schijf beslaan.\n"

#: fdisk/fdisksgilabel.c:463
#, c-format
msgid "Partition %d does not start on cylinder boundary.\n"
msgstr "Partitie %d begint niet op een cilindergrens.\n"

#: fdisk/fdisksgilabel.c:469
#, c-format
msgid "Partition %d does not end on cylinder boundary.\n"
msgstr "Partitie %d eindigt niet op een cilindergrens.\n"

#: fdisk/fdisksgilabel.c:476
#, c-format
msgid "The Partition %d and %d overlap by %d sectors.\n"
msgstr "De partities %d en %d overlappen elkaar met %d sectoren.\n"

#: fdisk/fdisksgilabel.c:484 fdisk/fdisksgilabel.c:502
#, c-format
msgid "Unused gap of %8u sectors - sectors %8u-%u\n"
msgstr "Ongebruikt gat van %8u sectoren: sectoren %8u-%u\n"

#: fdisk/fdisksgilabel.c:513
#, c-format
msgid ""
"\n"
"The boot partition does not exist.\n"
msgstr ""
"\n"
"De opstartpartitie bestaat niet.\n"

#: fdisk/fdisksgilabel.c:516
#, c-format
msgid ""
"\n"
"The swap partition does not exist.\n"
msgstr ""
"\n"
"De wisselgeheugenpartitie bestaat niet.\n"

#: fdisk/fdisksgilabel.c:520
#, c-format
msgid ""
"\n"
"The swap partition has no swap type.\n"
msgstr ""
"\n"
"De wisselgeheugenpartitie heeft geen soortaanduiding.\n"

#: fdisk/fdisksgilabel.c:523
#, c-format
msgid "\tYou have chosen an unusual boot file name.\n"
msgstr "    U hebt een ongebruikelijke naam gekozen voor het opstartbestand.\n"

#: fdisk/fdisksgilabel.c:532
#, c-format
msgid "Sorry You may change the Tag of non-empty partitions.\n"
msgstr "Sorry, u kunt de soort van niet-lege partities niet wijzigen.\n"

#: fdisk/fdisksgilabel.c:538
msgid ""
"It is highly recommended that the partition at offset 0\n"
"is of type \"SGI volhdr\", the IRIX system will rely on it to\n"
"retrieve from its directory standalone tools like sash and fx.\n"
"Only the \"SGI volume\" entire disk section may violate this.\n"
"Type YES if you are sure about tagging this partition differently.\n"
msgstr ""
"Het wordt sterk aangeraden om de partitie op plaats 0 van het soort\n"
"'SGI volhdr' te laten zijn.  IRIX vertrouwt hierop bij het opzoeken\n"
"van programma's zoals 'sash' en 'fx'.  Alleen het gehele-schijfdeel\n"
"'SGI volumen' mag deze regel overtreden.  Typ JA als u zeker weet\n"
"dat u de soort van deze partitie wilt wijzigen.\n"

#: fdisk/fdisksgilabel.c:543 fdisk/fdisksunlabel.c:549
msgid "YES\n"
msgstr "JA\n"

#: fdisk/fdisksgilabel.c:568
#, c-format
msgid "Do You know, You got a partition overlap on the disk?\n"
msgstr "Weet u dat u een partitieoverlap hebt op de schijf?\n"

#: fdisk/fdisksgilabel.c:626
#, c-format
msgid "Attempting to generate entire disk entry automatically.\n"
msgstr "Poging tot het automatisch aanmaken van een gehele-schijfingang.\n"

#: fdisk/fdisksgilabel.c:631
#, c-format
msgid "The entire disk is already covered with partitions.\n"
msgstr "De volledige schijf is al ingedeeld in partities.\n"

#: fdisk/fdisksgilabel.c:635
#, c-format
msgid "You got a partition overlap on the disk. Fix it first!\n"
msgstr "U hebt een partitie-overlap op de schijf.  Los dit eerst op!\n"

#: fdisk/fdisksgilabel.c:644 fdisk/fdisksgilabel.c:673
#, c-format
msgid ""
"It is highly recommended that eleventh partition\n"
"covers the entire disk and is of type `SGI volume'\n"
msgstr ""
"Het wordt sterk aangeraden om de elfde partitie de gehele schijf\n"
"te laten beslaan en van het soort 'SGI volumen' te laten zijn.\n"

#: fdisk/fdisksgilabel.c:660
#, c-format
msgid "You will get a partition overlap on the disk. Fix it first!\n"
msgstr "U zult een partitie-overlap krijgen op de schijf.  Los dit eerst op!\n"

#: fdisk/fdisksgilabel.c:665
#, c-format
msgid " Last %s"
msgstr " Laatste %s"

#: fdisk/fdisksgilabel.c:695
#, c-format
msgid ""
"Building a new SGI disklabel. Changes will remain in memory only,\n"
"until you decide to write them. After that, of course, the previous\n"
"content will be unrecoverably lost.\n"
"\n"
msgstr ""
"Er wordt een nieuw SGI-schijflabel gemaakt.  Wijzigingen vinden enkel\n"
"en alleen in het geheugen plaats, totdat u besluit ze weg te schrijven.\n"
"Daarna is de oude inhoud uiteraard niet meer herstelbaar.\n"
"\n"

#: fdisk/fdisksgilabel.c:718 fdisk/fdisksunlabel.c:222
#, c-format
msgid ""
"Warning:  BLKGETSIZE ioctl failed on %s.  Using geometry cylinder value of %d.\n"
"This value may be truncated for devices > 33.8 GB.\n"
msgstr ""
"Waarschuwing: ioctl(BLKGETSIZE) is mislukt op %s.\n"
"Cilindergeometriewaarde %d wordt nu gebruikt.\n"
"Deze waarde kan voor apparaten groter dan 33.8 GB afgekapt zijn.\n"

#: fdisk/fdisksgilabel.c:732
#, c-format
msgid "Trying to keep parameters of partition %d.\n"
msgstr "Er wordt geprobeerd de parameters van partitie %d te behouden.\n"

#: fdisk/fdisksgilabel.c:734
#, c-format
msgid "ID=%02x\tSTART=%d\tLENGTH=%d\n"
msgstr "ID=%02x\tStart=%d\tLengte=%d\n"

#: fdisk/fdisksunlabel.c:38
msgid "Unassigned"
msgstr "(niet-toegewezen)"

#: fdisk/fdisksunlabel.c:40
msgid "SunOS root"
msgstr "SunOS root"

#: fdisk/fdisksunlabel.c:41
msgid "SunOS swap"
msgstr "SunOS wisselgeheugen"

#: fdisk/fdisksunlabel.c:42
msgid "SunOS usr"
msgstr "SunOS usr"

#: fdisk/fdisksunlabel.c:43
msgid "Whole disk"
msgstr "Gehele schijf"

#: fdisk/fdisksunlabel.c:44
msgid "SunOS stand"
msgstr "SunOS stand"

#: fdisk/fdisksunlabel.c:45
msgid "SunOS var"
msgstr "SunOS var"

#: fdisk/fdisksunlabel.c:46
msgid "SunOS home"
msgstr "SunOS home"

#: fdisk/fdisksunlabel.c:47
msgid "SunOS alt sectors"
msgstr "SunOS alt-sectoren"

#: fdisk/fdisksunlabel.c:48
msgid "SunOS cachefs"
msgstr "SunOS cachefs"

#: fdisk/fdisksunlabel.c:49
msgid "SunOS reserved"
msgstr "SunOS gereserveerd"

#: fdisk/fdisksunlabel.c:53 fdisk/i386_sys_types.c:103
msgid "Linux raid autodetect"
msgstr "Linux raidautodetectie"

#: fdisk/fdisksunlabel.c:136
#, c-format
msgid ""
"Detected sun disklabel with wrong checksum.\n"
"Probably you'll have to set all the values,\n"
"e.g. heads, sectors, cylinders and partitions\n"
"or force a fresh label (s command in main menu)\n"
msgstr ""
"Sun-schijflabel gevonden met onjuiste controlesom.\n"
"Waarschijnlijk zult u alle waarden in moeten stellen,\n"
"zoals koppen, sectoren, cilinders en partities, of een\n"
"verse label moeten maken (opdracht 's' in hoofdmenu).\n"

#: fdisk/fdisksunlabel.c:148
#, c-format
msgid "Detected sun disklabel with wrong version [0x%08x].\n"
msgstr "Sun-schijflabel gevonden met foutief versienummer [0x%08x].\n"

#: fdisk/fdisksunlabel.c:153
#, c-format
msgid "Detected sun disklabel with wrong sanity [0x%08x].\n"
msgstr "Sun-schijflabel gevonden met foutief controlenummer [0x%08x].\n"

#: fdisk/fdisksunlabel.c:158
#, c-format
msgid "Detected sun disklabel with wrong num_partitions [%u].\n"
msgstr "Sun-schijflabel gevonden met foutief partitie-aantal [%u].\n"

#: fdisk/fdisksunlabel.c:163
#, c-format
msgid "Warning: Wrong values need to be fixed up and will be corrected by w(rite)\n"
msgstr ""
"Waarschuwing: onjuiste waardes dienen verbeterd te worden en\n"
"zullen gecorrigeerd worden bij het wegschrijven ('w').\n"

#: fdisk/fdisksunlabel.c:193
#, c-format
msgid ""
"Building a new sun disklabel. Changes will remain in memory only,\n"
"until you decide to write them. After that, of course, the previous\n"
"content won't be recoverable.\n"
"\n"
msgstr ""
"Er wordt een nieuw Sun-schijflabel gemaakt.  Wijzigingen vinden enkel\n"
"en alleen in het geheugen plaats, totdat u besluit ze weg te schrijven.\n"
"Daarna is de oude inhoud uiteraard niet meer herstelbaar.\n"
"\n"

#: fdisk/fdisksunlabel.c:231
msgid "Sectors/track"
msgstr "Sectoren/spoor"

#: fdisk/fdisksunlabel.c:346
#, c-format
msgid "Partition %d doesn't end on cylinder boundary\n"
msgstr "Partitie %d eindigt niet op een cilindergrens\n"

#: fdisk/fdisksunlabel.c:366
#, c-format
msgid "Partition %d overlaps with others in sectors %d-%d\n"
msgstr "Partitie %d overlapt met andere in sectoren %d-%d\n"

#: fdisk/fdisksunlabel.c:388
#, c-format
msgid "Unused gap - sectors 0-%d\n"
msgstr "Ongebruikt gat: sectoren 0-%d\n"

#: fdisk/fdisksunlabel.c:390 fdisk/fdisksunlabel.c:396
#, c-format
msgid "Unused gap - sectors %d-%d\n"
msgstr "Ongebruikt gat: sectoren %d-%d\n"

#: fdisk/fdisksunlabel.c:421
#, c-format
msgid ""
"Other partitions already cover the whole disk.\n"
"Delete some/shrink them before retry.\n"
msgstr ""
"Andere partities beslaan al de gehele schijf.\n"
"Verwijder/verklein ze alvorens het opnieuw te proberen.\n"

#: fdisk/fdisksunlabel.c:444
#, c-format
msgid ""
"It is highly recommended that the third partition covers the whole disk\n"
"and is of type `Whole disk'\n"
msgstr ""
"Het wordt sterk aangeraden om de derde partitie de gehele schijf\n"
"te laten beslaan en van het soort 'Gehele schijf' te laten zijn.\n"

#: fdisk/fdisksunlabel.c:472
#, c-format
msgid "Sector %d is already allocated\n"
msgstr "Sector %d is al gereserveerd\n"

#: fdisk/fdisksunlabel.c:502
#, c-format
msgid ""
"You haven't covered the whole disk with the 3rd partition, but your value\n"
"%d %s covers some other partition. Your entry has been changed\n"
"to %d %s\n"
msgstr ""
"U hebt met de derde partitie niet de gehele schijf ingenomen;\n"
"uw waarde %d %s overlapt een andere partitie.\n"
"Uw invoer is gewijzigd tot %d %s.\n"

#: fdisk/fdisksunlabel.c:529
#, c-format
msgid ""
"If you want to maintain SunOS/Solaris compatibility, consider leaving this\n"
"partition as Whole disk (5), starting at 0, with %u sectors\n"
msgstr ""
"Als u SunOS/Solaris-compatibiliteit wilt behouden, kunt u deze partitie beter\n"
"als gehele schijf (5) laten, beginnend bij 0, met %u sectoren.\n"

#: fdisk/fdisksunlabel.c:544
msgid ""
"It is highly recommended that the partition at offset 0\n"
"is UFS, EXT2FS filesystem or SunOS swap. Putting Linux swap\n"
"there may destroy your partition table and bootblock.\n"
"Type YES if you're very sure you would like that partition\n"
"tagged with 82 (Linux swap): "
msgstr ""
"Het wordt sterk aangeraden om de partitie op plaats 0 van het soort UFS-\n"
"of EXT2FS-bestandssysteem of SunOS-wisselgeheugen te laten zijn.  Op deze\n"
"plaats Linux-wisselgeheugen neerzetten vernielt mogelijk uw partitietabel\n"
"en opstartblok.  Typ JA als u erg zeker bent dat u die partitie van type 82\n"
"(Linux-wisselgeheugen) wilt laten zijn: "

#: fdisk/fdisksunlabel.c:576
#, c-format
msgid ""
"\n"
"Disk %s (Sun disk label): %u heads, %llu sectors, %d rpm\n"
"%u cylinders, %d alternate cylinders, %d physical cylinders\n"
"%d extra sects/cyl, interleave %d:1\n"
"Label ID: %s\n"
"Volume ID: %s\n"
"Units = %s of %d * 512 bytes\n"
"\n"
msgstr ""
"\n"
"Schijf %s (Sun-schijflabel): %u koppen, %llu sectoren, %d rpm\n"
"%u cilinders, %d alternatieve cilinders, %d fysieke cilinders\n"
"%d extra sectoren/cilinder, tussenruimte %d:1\n"
"Label-ID: %s\n"
"Volumen-ID: %s\n"
"Eenheid = %s van %d * 512 bytes\n"
"\n"

#: fdisk/fdisksunlabel.c:592
#, c-format
msgid ""
"\n"
"Disk %s (Sun disk label): %u heads, %llu sectors, %u cylinders\n"
"Units = %s of %d * 512 bytes\n"
"\n"
msgstr ""
"\n"
"Schijf %s (Sun-schijflabel): %u koppen, %llu sectoren, %u cilinders\n"
"Eenheid = %s van %d * 512 bytes\n"
"\n"

#: fdisk/fdisksunlabel.c:597
#, c-format
msgid "%*s Flag    Start       End    Blocks   Id  System\n"
msgstr "%*s Optie   Begin     Einde   Blokken   ID  Systeem\n"

#: fdisk/fdisksunlabel.c:625
msgid "Number of alternate cylinders"
msgstr "Aantal alternatieve cilinders"

#: fdisk/fdisksunlabel.c:637
msgid "Extra sectors per cylinder"
msgstr "Extra sectoren per cilinder"

#: fdisk/fdisksunlabel.c:644
msgid "Interleave factor"
msgstr "Tussenruimtefactor"

#: fdisk/fdisksunlabel.c:651
msgid "Rotation speed (rpm)"
msgstr "Rotatiesnelheid (rpm)"

#: fdisk/fdisksunlabel.c:658
msgid "Number of physical cylinders"
msgstr "Aantal fysieke cilinders"

#: fdisk/i386_sys_types.c:6
msgid "Empty"
msgstr "Leeg"

#: fdisk/i386_sys_types.c:7
msgid "FAT12"
msgstr "FAT12"

#: fdisk/i386_sys_types.c:8
msgid "XENIX root"
msgstr "XENIX root"

#: fdisk/i386_sys_types.c:9
msgid "XENIX usr"
msgstr "XENIX usr"

#: fdisk/i386_sys_types.c:10
msgid "FAT16 <32M"
msgstr "FAT16 <32M"

#: fdisk/i386_sys_types.c:11
msgid "Extended"
msgstr "uitgebreid"

#: fdisk/i386_sys_types.c:12
msgid "FAT16"
msgstr "FAT16"

#: fdisk/i386_sys_types.c:13
msgid "HPFS/NTFS"
msgstr "HPFS/NTFS"

#: fdisk/i386_sys_types.c:14
msgid "AIX"
msgstr "AIX"

#: fdisk/i386_sys_types.c:15
msgid "AIX bootable"
msgstr "AIX opstartbaar"

#: fdisk/i386_sys_types.c:16
msgid "OS/2 Boot Manager"
msgstr "OS/2 opstartmanager"

#: fdisk/i386_sys_types.c:17
msgid "W95 FAT32"
msgstr "W95 FAT32"

#: fdisk/i386_sys_types.c:18
msgid "W95 FAT32 (LBA)"
msgstr "W95 FAT32 (LBA)"

#: fdisk/i386_sys_types.c:19
msgid "W95 FAT16 (LBA)"
msgstr "W95 FAT16 (LBA)"

#: fdisk/i386_sys_types.c:20
msgid "W95 Ext'd (LBA)"
msgstr "W95 Uitgeb. (LBA)"

#: fdisk/i386_sys_types.c:21
msgid "OPUS"
msgstr "OPUS"

#: fdisk/i386_sys_types.c:22
msgid "Hidden FAT12"
msgstr "verborgen FAT12"

#: fdisk/i386_sys_types.c:23
msgid "Compaq diagnostics"
msgstr "Compaq diagnostiek"

#: fdisk/i386_sys_types.c:24
msgid "Hidden FAT16 <32M"
msgstr "verborgen FAT16 <32M"

#: fdisk/i386_sys_types.c:25
msgid "Hidden FAT16"
msgstr "verborgen FAT16"

#: fdisk/i386_sys_types.c:26
msgid "Hidden HPFS/NTFS"
msgstr "verborgen HPFS/NTFS"

#: fdisk/i386_sys_types.c:27
msgid "AST SmartSleep"
msgstr "AST SmartSleep"

#: fdisk/i386_sys_types.c:28
msgid "Hidden W95 FAT32"
msgstr "verborgen W95 FAT32"

#: fdisk/i386_sys_types.c:29
msgid "Hidden W95 FAT32 (LBA)"
msgstr "verb. W95 FAT32 (LBA)"

#: fdisk/i386_sys_types.c:30
msgid "Hidden W95 FAT16 (LBA)"
msgstr "verb. W95 FAT16 (LBA)"

#: fdisk/i386_sys_types.c:31
msgid "NEC DOS"
msgstr "NEC DOS"

#: fdisk/i386_sys_types.c:32
msgid "Plan 9"
msgstr "Plan 9"

#: fdisk/i386_sys_types.c:33
msgid "PartitionMagic recovery"
msgstr "PartitionMagic recovery"

#: fdisk/i386_sys_types.c:34
msgid "Venix 80286"
msgstr "Venix 80286"

#: fdisk/i386_sys_types.c:35
msgid "PPC PReP Boot"
msgstr "PPC PReP opstart"

#: fdisk/i386_sys_types.c:36
msgid "SFS"
msgstr "SFS"

#: fdisk/i386_sys_types.c:37
msgid "QNX4.x"
msgstr "QNX4.x"

#: fdisk/i386_sys_types.c:38
msgid "QNX4.x 2nd part"
msgstr "QNX4.x 2de deel"

#: fdisk/i386_sys_types.c:39
msgid "QNX4.x 3rd part"
msgstr "QNX4.x 3de deel"

#: fdisk/i386_sys_types.c:40
msgid "OnTrack DM"
msgstr "OnTrack DM"

#: fdisk/i386_sys_types.c:41
msgid "OnTrack DM6 Aux1"
msgstr "OnTrack DM6 Aux1"

#: fdisk/i386_sys_types.c:42
msgid "CP/M"
msgstr "CP/M"

#: fdisk/i386_sys_types.c:43
msgid "OnTrack DM6 Aux3"
msgstr "OnTrack DM6 Aux3"

#: fdisk/i386_sys_types.c:44
msgid "OnTrackDM6"
msgstr "OnTrack DM6"

#: fdisk/i386_sys_types.c:45
msgid "EZ-Drive"
msgstr "EZ-Drive"

#: fdisk/i386_sys_types.c:46
msgid "Golden Bow"
msgstr "Golden Bow"

#: fdisk/i386_sys_types.c:47
msgid "Priam Edisk"
msgstr "Priam Edisk"

#: fdisk/i386_sys_types.c:48 fdisk/i386_sys_types.c:92
#: fdisk/i386_sys_types.c:98 fdisk/i386_sys_types.c:99
msgid "SpeedStor"
msgstr "SpeedStor"

#: fdisk/i386_sys_types.c:49
msgid "GNU HURD or SysV"
msgstr "GNU HURD / SysV"

#: fdisk/i386_sys_types.c:50
msgid "Novell Netware 286"
msgstr "Novell Netware 286"

#: fdisk/i386_sys_types.c:51
msgid "Novell Netware 386"
msgstr "Novell Netware 386"

#: fdisk/i386_sys_types.c:52
msgid "DiskSecure Multi-Boot"
msgstr "DiskSecure MultiBoot"

#: fdisk/i386_sys_types.c:53
msgid "PC/IX"
msgstr "PC/IX"

#: fdisk/i386_sys_types.c:54
msgid "Old Minix"
msgstr "oude Minix"

#: fdisk/i386_sys_types.c:55
msgid "Minix / old Linux"
msgstr "Minix / oude Linux"

#: fdisk/i386_sys_types.c:56
msgid "Linux swap / Solaris"
msgstr "Linux wisselgeheugen"

#: fdisk/i386_sys_types.c:57
msgid "Linux"
msgstr "Linux"

#: fdisk/i386_sys_types.c:58
msgid "OS/2 hidden C: drive"
msgstr "OS/2 verborgen C:"

#: fdisk/i386_sys_types.c:59
msgid "Linux extended"
msgstr "Linux uitgebreid"

#: fdisk/i386_sys_types.c:60 fdisk/i386_sys_types.c:61
msgid "NTFS volume set"
msgstr "NTFS volumenset"

#: fdisk/i386_sys_types.c:62
msgid "Linux plaintext"
msgstr "Linux plaintext"

#: fdisk/i386_sys_types.c:64
msgid "Amoeba"
msgstr "Amoeba"

#: fdisk/i386_sys_types.c:65
msgid "Amoeba BBT"
msgstr "Amoeba BBT"

#: fdisk/i386_sys_types.c:66
msgid "BSD/OS"
msgstr "BSD/OS"

#: fdisk/i386_sys_types.c:67
msgid "IBM Thinkpad hibernation"
msgstr "IBM Thinkpad hibernatie"

#: fdisk/i386_sys_types.c:68
msgid "FreeBSD"
msgstr "FreeBSD"

#: fdisk/i386_sys_types.c:69
msgid "OpenBSD"
msgstr "OpenBSD"

#: fdisk/i386_sys_types.c:70
msgid "NeXTSTEP"
msgstr "NeXTSTEP"

#: fdisk/i386_sys_types.c:71
msgid "Darwin UFS"
msgstr "Darwin UFS"

#: fdisk/i386_sys_types.c:72
msgid "NetBSD"
msgstr "NetBSD"

#: fdisk/i386_sys_types.c:73
msgid "Darwin boot"
msgstr "Darwin opstart"

#: fdisk/i386_sys_types.c:74
msgid "HFS / HFS+"
msgstr "HFS / HFS+"

#: fdisk/i386_sys_types.c:75
msgid "BSDI fs"
msgstr "BSDI-bestandssysteem"

#: fdisk/i386_sys_types.c:76
msgid "BSDI swap"
msgstr "BSDI-wisselgeheugen"

#: fdisk/i386_sys_types.c:77
msgid "Boot Wizard hidden"
msgstr "BootWizard verborgen"

#: fdisk/i386_sys_types.c:78
msgid "Solaris boot"
msgstr "Solaris opstart"

#: fdisk/i386_sys_types.c:79
msgid "Solaris"
msgstr "Solaris"

#: fdisk/i386_sys_types.c:80
msgid "DRDOS/sec (FAT-12)"
msgstr "DRDOS/sec (FAT12)"

#: fdisk/i386_sys_types.c:81
msgid "DRDOS/sec (FAT-16 < 32M)"
msgstr "DRDOS/sec (FAT16 <32M)"

#: fdisk/i386_sys_types.c:82
msgid "DRDOS/sec (FAT-16)"
msgstr "DRDOS/sec (FAT16)"

#: fdisk/i386_sys_types.c:83
msgid "Syrinx"
msgstr "Syrinx"

#: fdisk/i386_sys_types.c:84
msgid "Non-FS data"
msgstr "non-BS-gegevens"

#: fdisk/i386_sys_types.c:85
msgid "CP/M / CTOS / ..."
msgstr "CP/M / CTOS / ..."

#: fdisk/i386_sys_types.c:87
msgid "Dell Utility"
msgstr "Dell Utility"

#: fdisk/i386_sys_types.c:88
msgid "BootIt"
msgstr "BootIt"

#: fdisk/i386_sys_types.c:89
msgid "DOS access"
msgstr "DOS access"

#: fdisk/i386_sys_types.c:91
msgid "DOS R/O"
msgstr "DOS R/O"

#: fdisk/i386_sys_types.c:94
msgid "BeOS fs"
msgstr "BeOS bestandssysteem"

#: fdisk/i386_sys_types.c:95
msgid "GPT"
msgstr "GPT"

#: fdisk/i386_sys_types.c:96
msgid "EFI (FAT-12/16/32)"
msgstr "EFI (FAT-12/16/32)"

#: fdisk/i386_sys_types.c:97
msgid "Linux/PA-RISC boot"
msgstr "Linux/PA-RISC opstart"

#: fdisk/i386_sys_types.c:100
msgid "DOS secondary"
msgstr "DOS secundair"

#: fdisk/i386_sys_types.c:101
msgid "VMware VMFS"
msgstr "VMware VMFS"

#: fdisk/i386_sys_types.c:102
msgid "VMware VMKCORE"
msgstr "VMware vmkcore"

#: fdisk/i386_sys_types.c:106
msgid "LANstep"
msgstr "LANstep"

#: fdisk/i386_sys_types.c:107
msgid "BBT"
msgstr "BBT"

#: fdisk/sfdisk.c:164
#, c-format
msgid "seek error on %s - cannot seek to %lu\n"
msgstr "'seek'-fout op %s -- kan geen 'seek' doen naar %lu\n"

#: fdisk/sfdisk.c:169
#, c-format
msgid "seek error: wanted 0x%08x%08x, got 0x%08x%08x\n"
msgstr "'seek'-fout: 0x%08x%08x verwacht, 0x%08x%08x gekregen\n"

#: fdisk/sfdisk.c:215
msgid "out of memory - giving up\n"
msgstr "onvoldoende geheugen beschikbaar -- gestopt\n"

#: fdisk/sfdisk.c:220 fdisk/sfdisk.c:303
#, c-format
msgid "read error on %s - cannot read sector %lu\n"
msgstr "leesfout op %s -- kan sector %lu niet lezen\n"

#: fdisk/sfdisk.c:238
#, c-format
msgid "ERROR: sector %lu does not have an msdos signature\n"
msgstr "FOUT: sector %lu heeft geen MSDOS-vingerafdruk\n"

#: fdisk/sfdisk.c:253
#, c-format
msgid "write error on %s - cannot write sector %lu\n"
msgstr "schrijffout op %s -- kan sector %lu niet schrijven\n"

#: fdisk/sfdisk.c:291
#, c-format
msgid "cannot open partition sector save file (%s)\n"
msgstr "kan partitionerings-bewaarbestand (%s) niet openen\n"

#: fdisk/sfdisk.c:309
#, c-format
msgid "write error on %s\n"
msgstr "schrijffout op %s\n"

#: fdisk/sfdisk.c:335
#, c-format
msgid "cannot stat partition restore file (%s)\n"
msgstr "kan status van partitionerings-herstelbestand (%s) niet bepalen\n"

#: fdisk/sfdisk.c:340
msgid "partition restore file has wrong size - not restoring\n"
msgstr "partitionerings-herstelbestand heeft onjuiste grootte -- niet hersteld\n"

#: fdisk/sfdisk.c:344
msgid "out of memory?\n"
msgstr "onvoldoende geheugen beschikbaar\n"

#: fdisk/sfdisk.c:350
#, c-format
msgid "cannot open partition restore file (%s)\n"
msgstr "kan partitionerings-herstelbestand (%s) niet openen\n"

#: fdisk/sfdisk.c:356
#, c-format
msgid "error reading %s\n"
msgstr "fout bij lezen van %s\n"

#: fdisk/sfdisk.c:363
#, c-format
msgid "cannot open device %s for writing\n"
msgstr "kan apparaat %s niet openen om te schrijven\n"

#: fdisk/sfdisk.c:375
#, c-format
msgid "error writing sector %lu on %s\n"
msgstr "fout bij schrijven van sector %lu op %s\n"

#: fdisk/sfdisk.c:440
#, c-format
msgid "Disk %s: cannot get geometry\n"
msgstr "Schijf %s: kan geometrie niet bepalen\n"

#: fdisk/sfdisk.c:457
#, c-format
msgid "Disk %s: cannot get size\n"
msgstr "Schijf %s: kan grootte niet bepalen\n"

#: fdisk/sfdisk.c:490
#, c-format
msgid ""
"Warning: start=%lu - this looks like a partition rather than\n"
"the entire disk. Using fdisk on it is probably meaningless.\n"
"[Use the --force option if you really want this]\n"
msgstr ""
"Waarschuwing: begin=%lu -- dit ziet er uit als een partitie\n"
"in plaats van een gehele schijf.  Hierop fdisk gebruiken is\n"
"waarschijnlijk zinloos.\n"
"(Gebruik de optie --force als u dit echt wilt doen.)\n"

#: fdisk/sfdisk.c:497
#, c-format
msgid "Warning: HDIO_GETGEO says that there are %lu heads\n"
msgstr "Waarschuwing: ioctl(HDIO_GETGEO) zegt dat er %lu koppen zijn\n"

#: fdisk/sfdisk.c:500
#, c-format
msgid "Warning: HDIO_GETGEO says that there are %lu sectors\n"
msgstr "Waarschuwing: ioctl(HDIO_GETGEO) zegt dat er %lu sectoren zijn\n"

#: fdisk/sfdisk.c:504
#, c-format
msgid "Warning: BLKGETSIZE/HDIO_GETGEO says that there are %lu cylinders\n"
msgstr "Waarschuwing: ioctl(BLKGETSIZE/HDIO_GETGEO) zegt dat er %lu cilinders zijn\n"

#: fdisk/sfdisk.c:509
#, c-format
msgid ""
"Warning: unlikely number of sectors (%lu) - usually at most 63\n"
"This will give problems with all software that uses C/H/S addressing.\n"
msgstr ""
"Waarschuwing: onwaarschijnlijk aantal sectoren (%lu) -- meestal hoogstens 63.\n"
"Dit zal problemen geven met alle software die C/K/S-adressering gebruikt.\n"

#: fdisk/sfdisk.c:513
#, c-format
msgid ""
"\n"
"Disk %s: %lu cylinders, %lu heads, %lu sectors/track\n"
msgstr ""
"\n"
"Schijf %s: %lu cilinders, %lu koppen, %lu sectoren/spoor\n"

#: fdisk/sfdisk.c:595
#, c-format
msgid "%s of partition %s has impossible value for head: %lu (should be in 0-%lu)\n"
msgstr "%s van partitie %s heeft een onmogelijke waarde voor koppen: %lu (moet liggen tussen 0 en %lu)\n"

#: fdisk/sfdisk.c:600
#, c-format
msgid "%s of partition %s has impossible value for sector: %lu (should be in 1-%lu)\n"
msgstr "%s van partitie %s heeft een onmogelijke waarde voor sectoren: %lu (moet liggen tussen 1 en %lu)\n"

#: fdisk/sfdisk.c:605
#, c-format
msgid "%s of partition %s has impossible value for cylinders: %lu (should be in 0-%lu)\n"
msgstr "%s van partitie %s heeft een onmogelijke waarde voor cilinders: %lu (moet liggen tussen 0 en %lu)\n"

#: fdisk/sfdisk.c:645
#, c-format
msgid ""
"Id  Name\n"
"\n"
msgstr ""
"Id  Naam\n"
"\n"

#: fdisk/sfdisk.c:806
#, c-format
msgid "Re-reading the partition table ...\n"
msgstr "Herinlezen van partitietabel...\n"

#: fdisk/sfdisk.c:811
msgid ""
"The command to re-read the partition table failed.\n"
"Run partprobe(8), kpartx(8) or reboot your system now,\n"
"before using mkfs\n"
msgstr ""
"Het opnieuw inlezen van de partitietabel is mislukt.\n"
"Voer partprobe(8) of kpartx(8) uit, of herstart uw systeem nu,\n"
"alvorens 'mkfs' te gebruiken.\n"

#: fdisk/sfdisk.c:817
#, c-format
msgid "Error closing %s\n"
msgstr "Fout bij sluiten van %s\n"

#: fdisk/sfdisk.c:855
#, c-format
msgid "%s: no such partition\n"
msgstr "%s: die partitie bestaat niet\n"

#: fdisk/sfdisk.c:878
msgid "unrecognized format - using sectors\n"
msgstr "onbekende eenheid -- \"sectoren\" wordt gebruikt\n"

#: fdisk/sfdisk.c:929
#, c-format
msgid "unimplemented format - using %s\n"
msgstr "onbeschikbare eenheid  -- \"%s\" wordt gebruikt\n"

#: fdisk/sfdisk.c:933
#, c-format
msgid ""
"Units = cylinders of %lu bytes, blocks of 1024 bytes, counting from %d\n"
"\n"
msgstr ""
"Eenheid = cilinders van %lu bytes, blokken van 1024 bytes, tellend vanaf %d\n"
"\n"

#: fdisk/sfdisk.c:936
#, c-format
msgid "   Device Boot Start     End   #cyls    #blocks   Id  System\n"
msgstr " Apparaat Opst Begin   Einde   #cils   #blokken   ID  Systeem\n"

#: fdisk/sfdisk.c:941
#, c-format
msgid ""
"Units = sectors of 512 bytes, counting from %d\n"
"\n"
msgstr ""
"Eenheid = sectoren van 512 bytes, tellend vanaf %d\n"
"\n"

#: fdisk/sfdisk.c:943
#, c-format
msgid "   Device Boot    Start       End   #sectors  Id  System\n"
msgstr " Apparaat Opst    Begin     Einde  #sectoren  ID  Systeem\n"

#: fdisk/sfdisk.c:946
#, c-format
msgid ""
"Units = blocks of 1024 bytes, counting from %d\n"
"\n"
msgstr ""
"Eenheid = blokken van 1024 bytes, tellend vanaf %d\n"
"\n"

#: fdisk/sfdisk.c:948
#, c-format
msgid "   Device Boot   Start       End    #blocks   Id  System\n"
msgstr " Apparaat Opst   Begin     Einde   #blokken   ID  Systeem\n"

#: fdisk/sfdisk.c:951
#, c-format
msgid ""
"Units = mebibytes of 1048576 bytes, blocks of 1024 bytes, counting from %d\n"
"\n"
msgstr ""
"Eenheid = mebibytes van 1048576 bytes, blokken van 1024 bytes, tellend vanaf %d\n"
"\n"

#: fdisk/sfdisk.c:953
#, c-format
msgid "   Device Boot Start   End    MiB    #blocks   Id  System\n"
msgstr " Apparaat Ops Begin  Einde    MiB   #blokken   ID  Systeem\n"

#: fdisk/sfdisk.c:1113
#, c-format
msgid "\t\tstart: (c,h,s) expected (%ld,%ld,%ld) found (%ld,%ld,%ld)\n"
msgstr "    begin: (c,k,s) verwacht: (%ld,%ld,%ld) gevonden: (%ld,%ld,%ld)\n"

#: fdisk/sfdisk.c:1120
#, c-format
msgid "\t\tend: (c,h,s) expected (%ld,%ld,%ld) found (%ld,%ld,%ld)\n"
msgstr "    einde: (c,k,s) verwacht: (%ld,%ld,%ld) gevonden: (%ld,%ld,%ld)\n"

#: fdisk/sfdisk.c:1123
#, c-format
msgid "partition ends on cylinder %ld, beyond the end of the disk\n"
msgstr "partitie eindigt op cilinder %ld, na het einde van de schijf\n"

#: fdisk/sfdisk.c:1133
msgid "No partitions found\n"
msgstr "Geen partities gevonden.\n"

#: fdisk/sfdisk.c:1137
#, c-format
msgid ""
"Warning: The partition table looks like it was made\n"
"  for C/H/S=*/%ld/%ld (instead of %ld/%ld/%ld).\n"
"For this listing I'll assume that geometry.\n"
msgstr ""
"Waarschuwing: het lijkt erop dat de partitietabel gemaakt is voor\n"
"              C/K/S=*/%ld/%ld (in plaats van voor %ld/%ld/%ld);\n"
"              dit overzicht neemt die eerste C/K/S-geometrie aan.\n"

#: fdisk/sfdisk.c:1186
msgid "no partition table present.\n"
msgstr "geen partitietabel aanwezig\n"

#: fdisk/sfdisk.c:1188
#, c-format
msgid "strange, only %d partitions defined.\n"
msgstr "Vreemd: slechts %d partities gedefinieerd.\n"

#: fdisk/sfdisk.c:1197
#, c-format
msgid "Warning: partition %s has size 0 but is not marked Empty\n"
msgstr "Waarschuwing: partitie %s heeft grootte 0, maar is niet aangegeven als Leeg\n"

#: fdisk/sfdisk.c:1200
#, c-format
msgid "Warning: partition %s has size 0 and is bootable\n"
msgstr "Waarschuwing: partitie %s heeft grootte 0 en is opstartbaar\n"

#: fdisk/sfdisk.c:1203
#, c-format
msgid "Warning: partition %s has size 0 and nonzero start\n"
msgstr "Waarschuwing: partitie %s heeft grootte 0 maar een niet-nul beginsector\n"

#: fdisk/sfdisk.c:1214
#, c-format
msgid "Warning: partition %s "
msgstr "Waarschuwing: partitie %s "

#: fdisk/sfdisk.c:1215
#, c-format
msgid "is not contained in partition %s\n"
msgstr "valt niet binnen partitie %s\n"

#: fdisk/sfdisk.c:1226
#, c-format
msgid "Warning: partitions %s "
msgstr "Waarschuwing: partities %s "

#: fdisk/sfdisk.c:1227
#, c-format
msgid "and %s overlap\n"
msgstr "en %s overlappen\n"

#: fdisk/sfdisk.c:1238
#, c-format
msgid ""
"Warning: partition %s contains part of the partition table (sector %lu),\n"
"and will destroy it when filled\n"
msgstr ""
"Waarschuwing: partitie %s bevat een deel van de partitietabel (sector %lu),\n"
"en zal deze vernielen als zij wordt gevuld\n"

#: fdisk/sfdisk.c:1250
#, c-format
msgid "Warning: partition %s starts at sector 0\n"
msgstr "Waarschuwing: partitie %s begint op sector 0\n"

#: fdisk/sfdisk.c:1254
#, c-format
msgid "Warning: partition %s extends past end of disk\n"
msgstr "Waarschuwing: partitie %s loopt door tot voorbij het einde van de schijf\n"

#: fdisk/sfdisk.c:1269
msgid ""
"Among the primary partitions, at most one can be extended\n"
" (although this is not a problem under Linux)\n"
msgstr ""
"Van de primaire partities kan er ten hoogste één uitgebreid zijn\n"
"(onder Linux is dit echter geen probleem).\n"

#: fdisk/sfdisk.c:1287
#, c-format
msgid "Warning: partition %s does not start at a cylinder boundary\n"
msgstr "Waarschuwing: partitie %s begint niet op een cilindergrens\n"

#: fdisk/sfdisk.c:1293
#, c-format
msgid "Warning: partition %s does not end at a cylinder boundary\n"
msgstr "Waarschuwing: partitie %s eindigt niet op een cilindergrens\n"

#: fdisk/sfdisk.c:1311
msgid ""
"Warning: more than one primary partition is marked bootable (active)\n"
"This does not matter for LILO, but the DOS MBR will not boot this disk.\n"
msgstr ""
"Waarschuwing: meerdere primaire partities zijn gemarkeerd als opstartbaar.\n"
"Voor LILO maakt dit niets uit, maar DOS MBR zal niet van deze schijf opstarten.\n"

#: fdisk/sfdisk.c:1318
msgid ""
"Warning: usually one can boot from primary partitions only\n"
"LILO disregards the `bootable' flag.\n"
msgstr ""
"Waarschuwing: normaal gesproken kan men alleen van primaire\n"
"partities opstarten.  LILO negeert de 'opstartbaar'-vlag.\n"

#: fdisk/sfdisk.c:1324
msgid ""
"Warning: no primary partition is marked bootable (active)\n"
"This does not matter for LILO, but the DOS MBR will not boot this disk.\n"
msgstr ""
"Waarschuwing: er is geen primaire partitie gemarkeerd als opstartbaar.\n"
"Voor LILO maakt dit niets uit, maar DOS MBR zal niet van deze schijf opstarten.\n"

#: fdisk/sfdisk.c:1338
msgid "start"
msgstr "begin"

#: fdisk/sfdisk.c:1341
#, c-format
msgid "partition %s: start: (c,h,s) expected (%ld,%ld,%ld) found (%ld,%ld,%ld)\n"
msgstr "partitie %s: begin: (c,k,s) verwacht: (%ld,%ld,%ld) gevonden: (%ld,%ld,%ld)\n"

#: fdisk/sfdisk.c:1347
msgid "end"
msgstr "einde"

#: fdisk/sfdisk.c:1350
#, c-format
msgid "partition %s: end: (c,h,s) expected (%ld,%ld,%ld) found (%ld,%ld,%ld)\n"
msgstr "partitie %s: einde: (c,k,s) verwacht: (%ld,%ld,%ld) gevonden: (%ld,%ld,%ld)\n"

#: fdisk/sfdisk.c:1353
#, c-format
msgid "partition %s ends on cylinder %ld, beyond the end of the disk\n"
msgstr "partitie %s eindigt op cilinder %ld, na het einde van de schijf\n"

#: fdisk/sfdisk.c:1378
#, c-format
msgid ""
"Warning: shifted start of the extd partition from %ld to %ld\n"
"(For listing purposes only. Do not change its contents.)\n"
msgstr ""
"Waarschuwing: begin van uitgebreide partitie is verschoven van %ld naar %ld.\n"
"(Alleen voor weergave.  De inhoud wordt niet gewijzigd.)\n"

#: fdisk/sfdisk.c:1384
msgid ""
"Warning: extended partition does not start at a cylinder boundary.\n"
"DOS and Linux will interpret the contents differently.\n"
msgstr ""
"Waarschuwing: uitgebreide partitie begint niet op een cilindergrens.\n"
"DOS en Linux zullen de inhoud verschillend interpreteren.\n"

#: fdisk/sfdisk.c:1402 fdisk/sfdisk.c:1479
#, c-format
msgid "too many partitions - ignoring those past nr (%d)\n"
msgstr "te veel partities -- die na nummer (%d) worden genegeerd\n"

#: fdisk/sfdisk.c:1417
msgid "tree of partitions?\n"
msgstr "een boom van partities?\n"

#: fdisk/sfdisk.c:1525
msgid "detected Disk Manager - unable to handle that\n"
msgstr "Disk Manager gedetecteerd; kan dit niet aan -- gestopt\n"

#: fdisk/sfdisk.c:1532
msgid "DM6 signature found - giving up\n"
msgstr "DM6-vingerafdruk gevonden -- gestopt\n"

#: fdisk/sfdisk.c:1552
msgid "strange..., an extended partition of size 0?\n"
msgstr "vreemd..., een uitgebreide partitie met grootte 0?\n"

#: fdisk/sfdisk.c:1559 fdisk/sfdisk.c:1570
msgid "strange..., a BSD partition of size 0?\n"
msgstr "vreemd..., een BSD-partitie met grootte 0?\n"

#: fdisk/sfdisk.c:1604
#, c-format
msgid " %s: unrecognized partition table type\n"
msgstr "%s: onbekend partitietabeltype\n"

#: fdisk/sfdisk.c:1616
msgid "-n flag was given: Nothing changed\n"
msgstr "optie '-n' werd gegeven: er is niets gewijzigd\n"

#: fdisk/sfdisk.c:1632
msgid "Failed saving the old sectors - aborting\n"
msgstr "Opslaan van oude sectoren is mislukt -- gestopt\n"

#: fdisk/sfdisk.c:1637 fdisk/sfdisk.c:1642
#, c-format
msgid "Failed writing the partition on %s\n"
msgstr "Schrijven van partitie op %s is mislukt\n"

#: fdisk/sfdisk.c:1719
msgid "long or incomplete input line - quitting\n"
msgstr "lange of incomplete invoerregel -- gestopt\n"

#: fdisk/sfdisk.c:1755
#, c-format
msgid "input error: `=' expected after %s field\n"
msgstr "invoerfout: '=' verwacht na veld %s\n"

#: fdisk/sfdisk.c:1762
#, c-format
msgid "input error: unexpected character %c after %s field\n"
msgstr "invoerfout: onverwacht teken %c na veld %s\n"

#: fdisk/sfdisk.c:1768
#, c-format
msgid "unrecognized input: %s\n"
msgstr "invoer niet herkend: %s\n"

#: fdisk/sfdisk.c:1810
msgid "number too big\n"
msgstr "getal is te groot\n"

#: fdisk/sfdisk.c:1814
msgid "trailing junk after number\n"
msgstr "onbegrepen tekens na getal\n"

#: fdisk/sfdisk.c:1938
msgid "no room for partition descriptor\n"
msgstr "geen ruimte voor partitiebeschrijver\n"

#: fdisk/sfdisk.c:1971
msgid "cannot build surrounding extended partition\n"
msgstr "kan omvattende uitgebreide partitie niet maken\n"

#: fdisk/sfdisk.c:2022
msgid "too many input fields\n"
msgstr "te veel invoervelden\n"

#: fdisk/sfdisk.c:2056
msgid "No room for more\n"
msgstr "Geen ruimte voor meer\n"

#: fdisk/sfdisk.c:2075
msgid "Illegal type\n"
msgstr "Onjuiste soort\n"

#: fdisk/sfdisk.c:2107
#, c-format
msgid "Warning: given size (%lu) exceeds max allowable size (%lu)\n"
msgstr "Waarschuwing: gegeven groote (%lu) is groter dan maximaal toegelaten grootte (%lu)\n"

#: fdisk/sfdisk.c:2113
msgid "Warning: empty partition\n"
msgstr "Waarschuwing: lege partitie\n"

#: fdisk/sfdisk.c:2127
#, c-format
msgid "Warning: bad partition start (earliest %lu)\n"
msgstr "Waarschuwing: ongeldig partitiebegin (eerste mogelijkheid is %lu)\n"

#: fdisk/sfdisk.c:2140
msgid "unrecognized bootable flag - choose - or *\n"
msgstr "onbekende 'opstartbaar'-vlag -- kies '-' of '*'\n"

#: fdisk/sfdisk.c:2157 fdisk/sfdisk.c:2170
msgid "partial c,h,s specification?\n"
msgstr "een gedeeltelijke c,k,s-specificatie?\n"

#: fdisk/sfdisk.c:2181
msgid "Extended partition not where expected\n"
msgstr "Uitgebreide partitie waar die niet verwacht werd\n"

#: fdisk/sfdisk.c:2213
msgid "bad input\n"
msgstr "ongeldige invoer\n"

#: fdisk/sfdisk.c:2235
msgid "too many partitions\n"
msgstr "te veel partities\n"

#: fdisk/sfdisk.c:2268
msgid ""
"Input in the following format; absent fields get a default value.\n"
"<start> <size> <type [E,S,L,X,hex]> <bootable [-,*]> <c,h,s> <c,h,s>\n"
"Usually you only need to specify <start> and <size> (and perhaps <type>).\n"
msgstr ""
"  \n"
"Invoer is in deze indeling (afwezige velden krijgen een standaardwaarde):\n"
"  <begin> <grootte> <soort [E,S,L,X,hex]> <opstartbaar [-,*]> <c,k,s> <c,k,s>\n"
"Meestal hoeft u alleen <begin> en <grootte> te gebruiken (en mogelijk <soort>).\n"

#: fdisk/sfdisk.c:2294
#, c-format
msgid "Usage: %s [options] device ...\n"
msgstr "Gebruik:  %s [opties] apparaat ...\n"

#: fdisk/sfdisk.c:2295
msgid "device: something like /dev/hda or /dev/sda"
msgstr "  (apparaat is zoiets als /dev/hda of /dev/sda)"

#: fdisk/sfdisk.c:2296
msgid "useful options:"
msgstr "Nuttige opties:"

#: fdisk/sfdisk.c:2297
msgid "    -s [or --show-size]: list size of a partition"
msgstr "  -s, --show-size     partitiegroottes tonen"

#: fdisk/sfdisk.c:2298
msgid "    -c [or --id]:        print or change partition Id"
msgstr "  -c, --id            partitie-ID tonen of wijzigen"

#: fdisk/sfdisk.c:2299
msgid "    -l [or --list]:      list partitions of each device"
msgstr "  -l, --list          partities weergeven"

#: fdisk/sfdisk.c:2300
msgid "    -d [or --dump]:      idem, but in a format suitable for later input"
msgstr "  -d, --dump          idem, maar in een opmaak geschikt voor latere invoer"

#: fdisk/sfdisk.c:2301
msgid "    -i [or --increment]: number cylinders etc. from 1 instead of from 0"
msgstr "  -i, --increment     cilinders/sectoren/... nummeren vanaf 1 in plaats vanaf 0"

#: fdisk/sfdisk.c:2302
msgid "    -uS, -uB, -uC, -uM:  accept/report in units of sectors/blocks/cylinders/MB"
msgstr "  -uS, -uB, -uC, -uM  invoeren/weergeven in sectoren/blokken/cilinders/MB"

#: fdisk/sfdisk.c:2303
msgid "    -T [or --list-types]:list the known partition types"
msgstr "  -T, --list-types    bekende partitietypen opsommen"

#: fdisk/sfdisk.c:2304
msgid "    -D [or --DOS]:       for DOS-compatibility: waste a little space"
msgstr "  -D, --DOS           een beetje ruimte verspillen (voor DOS-compatibiliteit)"

#: fdisk/sfdisk.c:2305
msgid "    -R [or --re-read]:   make kernel reread partition table"
msgstr "  -R, --re-read       de partitietabel opnieuw in laten lezen door de kernel"

#: fdisk/sfdisk.c:2306
msgid "    -N# :                change only the partition with number #"
msgstr "  -N#                 alleen partitie met nummer # wijzigen"

#: fdisk/sfdisk.c:2307
msgid "    -n :                 do not actually write to disk"
msgstr "  -n                  niet echt naar de schijf schrijven, doen alsof"

#: fdisk/sfdisk.c:2308
msgid "    -O file :            save the sectors that will be overwritten to file"
msgstr "  -O bestand          de te overschrijven sectoren opslaan in dit bestand"

#: fdisk/sfdisk.c:2309
msgid "    -I file :            restore these sectors again"
msgstr "  -I bestand          deze opgeslagen sectoren herstellen"

#: fdisk/sfdisk.c:2310
msgid "    -v [or --version]:   print version"
msgstr "  -v, --version       programmaversie tonen"

#: fdisk/sfdisk.c:2311
msgid "    -? [or --help]:      print this message"
msgstr "  -?, --help          deze hulptekst tonen"

#: fdisk/sfdisk.c:2312
msgid "dangerous options:"
msgstr "Gevaarlijke opties:"

#: fdisk/sfdisk.c:2313
msgid "    -g [or --show-geometry]: print the kernel's idea of the geometry"
msgstr "  -g, --show-geometry     de kernelvisie van de geometrie weergeven"

#: fdisk/sfdisk.c:2314
msgid "    -G [or --show-pt-geometry]: print geometry guessed from the partition table"
msgstr "  -G, --show-pt-geometry  de uit de partitietabel afgeleide geometrie weergeven"

#: fdisk/sfdisk.c:2315
msgid ""
"    -x [or --show-extended]: also list extended partitions on output\n"
"                             or expect descriptors for them on input"
msgstr ""
"  -x, --show-extended     ook uitgebreide partities opnemen in de uitvoer,\n"
"                          of beschrijvers ervan verwachten in de invoer"

#: fdisk/sfdisk.c:2317
msgid "    -L  [or --Linux]:      do not complain about things irrelevant for Linux"
msgstr "  -L, --Linux         niet klagen over dingen die niet relevant zijn voor Linux"

#: fdisk/sfdisk.c:2318
msgid "    -q  [or --quiet]:      suppress warning messages"
msgstr "  -q, --quiet         waarschuwingen onderdrukken"

#: fdisk/sfdisk.c:2319
msgid "    You can override the detected geometry using:"
msgstr "U kunt een andere dan de gevonden geometrie afdwingen met:"

#: fdisk/sfdisk.c:2320
msgid "    -C# [or --cylinders #]:set the number of cylinders to use"
msgstr "  -C#, --cylinders #  het aantal te gebruiken cilinders"

#: fdisk/sfdisk.c:2321
msgid "    -H# [or --heads #]:    set the number of heads to use"
msgstr "  -H#, --heads #      het aantal te gebruiken koppen"

#: fdisk/sfdisk.c:2322
msgid "    -S# [or --sectors #]:  set the number of sectors to use"
msgstr "  -S#, --sectors #    het aantal te gebruiken sectoren"

#: fdisk/sfdisk.c:2323
msgid "You can disable all consistency checking with:"
msgstr "U kunt alle consistentiecontroles uitzetten met:"

#: fdisk/sfdisk.c:2324
msgid "    -f  [or --force]:      do what I say, even if it is stupid"
msgstr "  -f, --force         precies doen als gegeven, *ook* als het dom is"

#: fdisk/sfdisk.c:2330
msgid "Usage:"
msgstr "Gebruik: "

#: fdisk/sfdisk.c:2331
#, c-format
msgid "%s device\t\t list active partitions on device\n"
msgstr "%s apparaat            actieve partities op apparaat weergeven\n"

#: fdisk/sfdisk.c:2332
#, c-format
msgid "%s device n1 n2 ... activate partitions n1 ..., inactivate the rest\n"
msgstr "%s apparaat n1 n2 ...  genoemde partities activeren, de rest de-activeren\n"

#: fdisk/sfdisk.c:2333
#, c-format
msgid "%s -An device\t activate partition n, inactivate the other ones\n"
msgstr "%s -An apparaat        partitie n activeren, alle andere de-activeren\n"

#: fdisk/sfdisk.c:2453
#, c-format
msgid ""
"\n"
"WARNING: GPT (GUID Partition Table) detected on '%s'! The util sfdisk doesn't support GPT. Use GNU Parted.\n"
"\n"
msgstr ""
"\n"
"Waarschuwing: GPT (GUID-partitietabel) gevonden op '%s'!\n"
"Het programma 'sfdisk' ondersteunt GPT niet.  Gebruik GNU 'parted'.\n"
"\n"

#: fdisk/sfdisk.c:2456
#, c-format
msgid "Use the --force flag to overrule this check.\n"
msgstr "Gebruik '--force' om deze controle over te slaan.\n"

#: fdisk/sfdisk.c:2495
msgid "no command?\n"
msgstr "geen opdracht?\n"

#: fdisk/sfdisk.c:2627
#, c-format
msgid "total: %llu blocks\n"
msgstr "totaal: %llu blokken\n"

#: fdisk/sfdisk.c:2670
msgid "usage: sfdisk --print-id device partition-number\n"
msgstr "Gebruik:  sfdisk --print-id apparaat partitienummer\n"

#: fdisk/sfdisk.c:2672
msgid "usage: sfdisk --change-id device partition-number Id\n"
msgstr "Gebruik:  sfdisk --change-id apparaat partitienummer ID\n"

#: fdisk/sfdisk.c:2674
msgid "usage: sfdisk --id device partition-number [Id]\n"
msgstr "Gebruik:  sfdisk --id apparaat partitienummer [ID]\n"

#: fdisk/sfdisk.c:2681
msgid "can specify only one device (except with -l or -s)\n"
msgstr "slechts één apparaat is mogelijk (behalve met '-l' of '-s')\n"

#: fdisk/sfdisk.c:2707
#, c-format
msgid "cannot open %s read-write\n"
msgstr "kan %s niet openen voor lezen-en-schrijven\n"

#: fdisk/sfdisk.c:2709
#, c-format
msgid "cannot open %s for reading\n"
msgstr "kan %s niet openen om te lezen\n"

#: fdisk/sfdisk.c:2734
#, c-format
msgid "%s: OK\n"
msgstr "%s: OK\n"

#: fdisk/sfdisk.c:2753 fdisk/sfdisk.c:2786
#, c-format
msgid "%s: %ld cylinders, %ld heads, %ld sectors/track\n"
msgstr "%s: %ld cilinders, %ld koppen, %ld sectoren/spoor\n"

#: fdisk/sfdisk.c:2805
#, c-format
msgid "Cannot get size of %s\n"
msgstr "kan grootte van %s niet opvragen\n"

#: fdisk/sfdisk.c:2885
#, c-format
msgid "bad active byte: 0x%x instead of 0x80\n"
msgstr "onjuiste 'opstartbaar'-vlag: 0x%x in plaats van 0x80\n"

#: fdisk/sfdisk.c:2903 fdisk/sfdisk.c:2958 fdisk/sfdisk.c:2991
msgid ""
"Done\n"
"\n"
msgstr ""
"Voltooid\n"
"\n"

#: fdisk/sfdisk.c:2912
#, c-format
msgid ""
"You have %d active primary partitions. This does not matter for LILO,\n"
"but the DOS MBR will only boot a disk with 1 active partition.\n"
msgstr ""
"U hebt %d actieve, primaire partities.  Dit maakt niets uit voor LILO,\n"
"maar DOS MBR start alleen op van een schijf met 1 actieve partitie.\n"

#: fdisk/sfdisk.c:2928
#, c-format
msgid "partition %s has id %x and is not hidden\n"
msgstr "partitie %s heeft ID %x en is niet verborgen\n"

#: fdisk/sfdisk.c:2987
#, c-format
msgid "Bad Id %lx\n"
msgstr "Ongeldig ID %lx\n"

#: fdisk/sfdisk.c:3004
msgid "This disk is currently in use.\n"
msgstr "Deze schijf is op dit moment in gebruik.\n"

#: fdisk/sfdisk.c:3023
#, c-format
msgid "Fatal error: cannot find %s\n"
msgstr "Fatale fout: kan %s niet vinden\n"

#: fdisk/sfdisk.c:3026
#, c-format
msgid "Warning: %s is not a block device\n"
msgstr "Waarschuwing: %s is geen blok-apparaat\n"

#: fdisk/sfdisk.c:3032
msgid "Checking that no-one is using this disk right now ...\n"
msgstr "Even controleren of iemand deze schijf nu gebruikt...\n"

#: fdisk/sfdisk.c:3034
msgid ""
"\n"
"This disk is currently in use - repartitioning is probably a bad idea.\n"
"Umount all file systems, and swapoff all swap partitions on this disk.\n"
"Use the --no-reread flag to suppress this check.\n"
msgstr ""
"\n"
"Deze schijf is in gebruik -- nu herpartitioneren is een slecht idee.\n"
"Ontkoppel eerst alle bestandssystemen, en schakel met 'swapoff' alle\n"
"wisselgeheugenpartities op deze schijf uit.\n"
"Of gebruik optie '--no-reread' om deze controle te onderdrukken.\n"

#: fdisk/sfdisk.c:3038
msgid "Use the --force flag to overrule all checks.\n"
msgstr "Gebruik --force om alle controles te negeren.\n"

#: fdisk/sfdisk.c:3042
msgid "OK\n"
msgstr "OK\n"

#: fdisk/sfdisk.c:3051
#, c-format
msgid "Old situation:\n"
msgstr "Oude situatie:\n"

#: fdisk/sfdisk.c:3055
#, c-format
msgid "Partition %d does not exist, cannot change it\n"
msgstr "Partitie %d bestaat niet; kan deze dus niet veranderen!\n"

#: fdisk/sfdisk.c:3063
#, c-format
msgid "New situation:\n"
msgstr "Nieuwe situatie:\n"

#: fdisk/sfdisk.c:3068
msgid ""
"I don't like these partitions - nothing changed.\n"
"(If you really want this, use the --force option.)\n"
msgstr ""
"Hmm... vreemde partities -- er is niets gewijzigd.\n"
"(Als u dit echt wilt, kunt u --force gebruiken.)\n"

#: fdisk/sfdisk.c:3071
msgid "I don't like this - probably you should answer No\n"
msgstr "Hmm... vreemde partities -- misschien moet u Nee antwoorden.\n"

#: fdisk/sfdisk.c:3076
#, c-format
msgid "Are you satisfied with this? [ynq] "
msgstr "Bent u hiermee tevreden? [ynq] "

#: fdisk/sfdisk.c:3078
#, c-format
msgid "Do you want to write this to disk? [ynq] "
msgstr "Wilt u dit naar de schijf schrijven? [ynq] "

#: fdisk/sfdisk.c:3083
#, c-format
msgid ""
"\n"
"sfdisk: premature end of input\n"
msgstr ""
"\n"
"sfdisk: voortijdig einde van de invoer\n"

#: fdisk/sfdisk.c:3085
msgid "Quitting - nothing changed\n"
msgstr "Gestopt -- er is niets gewijzigd.\n"

#: fdisk/sfdisk.c:3091
#, c-format
msgid "Please answer one of y,n,q\n"
msgstr "Antwoord met 'y' (ja) of 'n' (nee) of 'q' (stoppen).\n"

#: fdisk/sfdisk.c:3099
#, c-format
msgid ""
"Successfully wrote the new partition table\n"
"\n"
msgstr ""
"De nieuwe partitietabel is succesvol geschreven.\n"
"\n"

#: fdisk/sfdisk.c:3105
msgid ""
"If you created or changed a DOS partition, /dev/foo7, say, then use dd(1)\n"
"to zero the first 512 bytes:  dd if=/dev/zero of=/dev/foo7 bs=512 count=1\n"
"(See fdisk(8).)\n"
msgstr ""
"Als u een DOS-partitie gemaakt of gewijzigd hebt, stel /dev/foo7,\n"
"gebruik dan dd(1) om de eerste 512 bytes nul te maken:\n"
"  dd if=/dev/zero of=/dev/foo7 bs=512 count=1  (zie man fdisk(8))\n"

#: fsck/fsck.c:326
#, c-format
msgid "WARNING: couldn't open %s: %s\n"
msgstr "WAARSCHUWING: kan %s niet openen: %s\n"

#: fsck/fsck.c:336
#, c-format
msgid "WARNING: bad format on line %d of %s\n"
msgstr "WAARSCHUWING: ongeldige syntax op regel %d van %s\n"

#: fsck/fsck.c:352
msgid ""
"WARNING: Your /etc/fstab does not contain the fsck passno\n"
"\tfield.  I will kludge around things for you, but you\n"
"\tshould fix your /etc/fstab file as soon as you can.\n"
"\n"
msgstr ""
"WAARSCHUWING: /etc/fstab bevat geen zesde veld (een fsck-volgnummer).\n"
"    Er wordt nu omheengewerkt, maar u zou dit veld bij\n"
"    de eerstvolgende gelegenheid dienen toe te voegen.\n"
"\n"

#: fsck/fsck.c:460
#, c-format
msgid "fsck: %s: not found\n"
msgstr "fsck: %s: niet gevonden\n"

#: fsck/fsck.c:576
#, c-format
msgid "%s: wait: No more child process?!?\n"
msgstr "%s: wait: Geen dochterprocessen meer?!?\n"

#: fsck/fsck.c:598
#, c-format
msgid "Warning... %s for device %s exited with signal %d.\n"
msgstr "Waarschuwing... %s voor apparaat %s eindigde met signaal %d.\n"

#: fsck/fsck.c:604
#, c-format
msgid "%s %s: status is %x, should never happen.\n"
msgstr "%s %s: status is %x -- zou nooit mogen gebeuren.\n"

#: fsck/fsck.c:643
#, c-format
msgid "Finished with %s (exit status %d)\n"
msgstr "Klaar met %s (afsluitwaarde %d)\n"

#: fsck/fsck.c:703
#, c-format
msgid "%s: Error %d while executing fsck.%s for %s\n"
msgstr "%s: Fout %d tijdens uitvoeren van 'fsck.%s' voor %s\n"

#: fsck/fsck.c:724
msgid ""
"Either all or none of the filesystem types passed to -t must be prefixed\n"
"with 'no' or '!'.\n"
msgstr ""
"Ofwel alle ofwel geen van de bestandssysteemsoorten bij optie '-t'\n"
"dienen te beginnen met 'no' of '!'.\n"

#: fsck/fsck.c:743
msgid "Couldn't allocate memory for filesystem types\n"
msgstr "onvoldoende geheugen beschikbaar voor bestandssysteemsoorten\n"

#: fsck/fsck.c:882
#, c-format
msgid "%s: skipping bad line in /etc/fstab: bind mount with nonzero fsck pass number\n"
msgstr ""
"%s: onjuiste regel in /etc/fstab wordt overgeslagen:\n"
"een 'bind'-aankoppeling met een niet-nul fsck-volgnummer\n"

#: fsck/fsck.c:892
#, c-format
msgid "%s: skipping nonexistent device\n"
msgstr "%s: niet-bestaand apparaat wordt overgeslagen\n"

#: fsck/fsck.c:918
#, c-format
msgid "fsck: cannot check %s: fsck.%s not found\n"
msgstr "fsck: kan %s niet controleren: geen 'fsck.%s' gevonden\n"

#: fsck/fsck.c:974
msgid "Checking all file systems.\n"
msgstr "Alle bestandssystemen worden gecontroleerd.\n"

#: fsck/fsck.c:1065
#, c-format
msgid "--waiting-- (pass %d)\n"
msgstr "--wachtend-- (stap %d)\n"

#: fsck/fsck.c:1085
msgid "Usage: fsck [-AMNPRTV] [ -C [ fd ] ] [-t fstype] [fs-options] [filesys ...]\n"
msgstr ""
"Gebruik: fsck [-AMNPRTV] [-C [bestandsdescriptor]] [-t bestandssyteemsoort]\n"
"              [bestandssysteemopties] [bestandssysteem...]\n"

#: fsck/fsck.c:1123
#, c-format
msgid "%s: too many devices\n"
msgstr "%s: te veel apparaten\n"

#: fsck/fsck.c:1134
#, c-format
msgid "Couldn't open %s: %s\n"
msgstr "Kan %s niet openen: %s\n"

#: fsck/fsck.c:1136
#, c-format
msgid "Is /proc mounted?\n"
msgstr "Is /proc wel aangekoppeld?\n"

#: fsck/fsck.c:1145
#, c-format
msgid "Must be root to scan for matching filesystems: %s\n"
msgstr "U dient root te zijn om naar overeenkomende bestandssystemen te zoeken: %s\n"

#: fsck/fsck.c:1148
#, c-format
msgid "Couldn't find matching filesystem: %s\n"
msgstr "Kan geen overeenkomend bestandssysteem vinden: %s\n"

#: fsck/fsck.c:1156 fsck/fsck.c:1242
#, c-format
msgid "%s: too many arguments\n"
msgstr "%s: te veel argumenten\n"

#: fsck/fsck.c:1276
#, c-format
msgid "fsck from %s\n"
msgstr "'fsck' uit %s\n"

#: fsck/fsck.c:1288
#, c-format
msgid "%s: Unable to allocate memory for fsck_path\n"
msgstr "%s: Onvoldoende geheugen beschikbaar voor fsck_path()\n"

#: getopt/getopt.c:229
msgid "Try `getopt --help' for more information.\n"
msgstr "Probeer 'getopt --help' voor meer informatie.\n"

#: getopt/getopt.c:295
msgid "empty long option after -l or --long argument"
msgstr "lege optiereeks na optie '-l' of '--long'"

#: getopt/getopt.c:315
msgid "unknown shell after -s or --shell argument"
msgstr "onbekende shell na optie '-s' of '--shell'"

#: getopt/getopt.c:320
msgid "Usage: getopt optstring parameters\n"
msgstr "Gebruik:  getopt optiereeks parameters\n"

#: getopt/getopt.c:321
msgid "       getopt [options] [--] optstring parameters\n"
msgstr "          getopt [opties] [--] optiereeks parameters\n"

#: getopt/getopt.c:322
msgid "       getopt [options] -o|--options optstring [options] [--]\n"
msgstr "          getopt [opties] -o|--options optiereeks [opties] [--] parameters\n"

#: getopt/getopt.c:323
msgid "              parameters\n"
msgstr "              \n"

#: getopt/getopt.c:324
msgid "  -a, --alternative            Allow long options starting with single -\n"
msgstr "  -a, --alternative             lange opties met één '-' toestaan\n"

#: getopt/getopt.c:325
msgid "  -h, --help                   This small usage guide\n"
msgstr "  -h, --help                    deze hulptekst tonen\n"

#: getopt/getopt.c:326
msgid "  -l, --longoptions=longopts   Long options to be recognized\n"
msgstr "  -l, --longoptions=optiereeks  te herkennen lange opties\n"

#: getopt/getopt.c:327
msgid "  -n, --name=progname          The name under which errors are reported\n"
msgstr "  -n, --name=programmanaam      fouten rapporteren onder deze naam\n"

#: getopt/getopt.c:328
msgid "  -o, --options=optstring      Short options to be recognized\n"
msgstr "  -o, --options=optiereeks      te herkennen korte opties\n"

#: getopt/getopt.c:329
msgid "  -q, --quiet                  Disable error reporting by getopt(3)\n"
msgstr "  -q, --quiet                   foutrapportage van getopt(3) uitzetten\n"

#: getopt/getopt.c:330
msgid "  -Q, --quiet-output           No normal output\n"
msgstr "  -Q, --quiet-output            gewone uitvoer onderdrukken\n"

#: getopt/getopt.c:331
msgid "  -s, --shell=shell            Set shell quoting conventions\n"
msgstr "  -s, --shell=shell             aanhalingsconventies van deze shell gebruiken\n"

#: getopt/getopt.c:332
msgid "  -T, --test                   Test for getopt(1) version\n"
msgstr "  -T, --test                    bepalen of dit een verbeterde getopt(1) is\n"

#: getopt/getopt.c:333
msgid "  -u, --unqote                 Do not quote the output\n"
msgstr "  -u, --unquoted                de uitvoer niet aanhalen\n"

#: getopt/getopt.c:334
msgid "  -V, --version                Output version information\n"
msgstr "  -V, --version                 programmaversie tonen\n"

#: getopt/getopt.c:388 getopt/getopt.c:447
msgid "missing optstring argument"
msgstr "ontbrekende optiereeks"

#: getopt/getopt.c:435
#, c-format
msgid "getopt (enhanced) 1.1.4\n"
msgstr "getopt (verbeterde) 1.1.4\n"

#: getopt/getopt.c:441
msgid "internal error, contact the author."
msgstr "*interne fout*; neem contact op met de auteur"

#: hwclock/cmos.c:176
#, c-format
msgid "booted from MILO\n"
msgstr "opgestart vanuit MILO\n"

#: hwclock/cmos.c:185
#, c-format
msgid "Ruffian BCD clock\n"
msgstr "Ruffiaanse BCD-klok\n"

#: hwclock/cmos.c:201
#, c-format
msgid "clockport adjusted to 0x%x\n"
msgstr "klokpoort aangepast naar 0x%x\n"

#: hwclock/cmos.c:213
#, c-format
msgid "funky TOY!\n"
msgstr "cool speeltje!\n"

#: hwclock/cmos.c:244
#, c-format
msgid "%s: atomic %s failed for 1000 iterations!"
msgstr "%s: atomische %s is duizend keer mislukt!"

#: hwclock/cmos.c:273
#, c-format
msgid "cmos_read(): write to control address %X failed: %s\n"
msgstr "cmos_read(): schrijven naar besturingsadres %X is mislukt: %s\n"

#: hwclock/cmos.c:276
#, c-format
msgid "cmos_read(): read data address %X failed: %s\n"
msgstr "cmos_read(): lezen van data-adres %X is mislukt: %s\n"

#: hwclock/cmos.c:307
#, c-format
msgid "cmos_write(): write to control address %X failed: %s\n"
msgstr "cmos_write(): schrijven naar besturingsadres %X is mislukt: %s\n"

#: hwclock/cmos.c:311
#, c-format
msgid "cmos_write(): write to data address %X failed: %s\n"
msgstr "cmos_write(): schrijven naar data-adres %X is mislukt: %s\n"

#: hwclock/cmos.c:574
#, c-format
msgid "Cannot open /dev/port: %s"
msgstr "Kan /dev/port niet openen: %s"

#: hwclock/cmos.c:581
#, c-format
msgid "I failed to get permission because I didn't try.\n"
msgstr "Geen toestemming gekregen, want niet geprobeerd.\n"

#: hwclock/cmos.c:584
#, c-format
msgid "%s is unable to get I/O port access:  the iopl(3) call failed.\n"
msgstr "%s kan geen I/O-poorttoegang krijgen: iopl(3) is mislukt.\n"

#: hwclock/cmos.c:587
#, c-format
msgid "Probably you need root privileges.\n"
msgstr "Waarschijnlijk hebt u root-privileges nodig.\n"

#: hwclock/hwclock.c:230
#, c-format
msgid "Assuming hardware clock is kept in %s time.\n"
msgstr "Er wordt aangenomen dat de hardwareklok op %s staat.\n"

#: hwclock/hwclock.c:231 hwclock/hwclock.c:326
msgid "UTC"
msgstr "UTC-tijd"

#: hwclock/hwclock.c:231 hwclock/hwclock.c:325
msgid "local"
msgstr "lokale tijd"

#: hwclock/hwclock.c:311
#, c-format
msgid "%s: Warning: unrecognized third line in adjtime file\n"
msgstr "%s: Waarschuwing: derde regel in adjtime-bestand is niet herkend.\n"

#: hwclock/hwclock.c:313
#, c-format
msgid "(Expected: `UTC' or `LOCAL' or nothing.)\n"
msgstr "(Verwacht: 'UTC' of 'LOCAL' of niets.)\n"

#: hwclock/hwclock.c:320
#, c-format
msgid "Last drift adjustment done at %ld seconds after 1969\n"
msgstr "Laatste verschuivingscorrectie is %ld seconden na 1969 gedaan.\n"

#: hwclock/hwclock.c:322
#, c-format
msgid "Last calibration done at %ld seconds after 1969\n"
msgstr "Laatste calibratie is %ld seconden na 1969 gedaan.\n"

#: hwclock/hwclock.c:324
#, c-format
msgid "Hardware clock is on %s time\n"
msgstr "Hardwareklok staat op %s.\n"

#: hwclock/hwclock.c:326
msgid "unknown"
msgstr "onbekende tijd"

#: hwclock/hwclock.c:350
#, c-format
msgid "Waiting for clock tick...\n"
msgstr "Wachten op kloktik...\n"

#: hwclock/hwclock.c:356
#, c-format
msgid "...synchronization failed\n"
msgstr "...synchronisatie is mislukt.\n"

#: hwclock/hwclock.c:358
#, c-format
msgid "...got clock tick\n"
msgstr "...kloktik ontvangen.\n"

#: hwclock/hwclock.c:412
#, c-format
msgid "Invalid values in hardware clock: %4d/%.2d/%.2d %.2d:%.2d:%.2d\n"
msgstr "Ongeldige waarden in hardwareklok: %4d/%.2d/%.2d %.2d:%.2d:%.2d\n"

#: hwclock/hwclock.c:420
#, c-format
msgid "Hw clock time : %4d/%.2d/%.2d %.2d:%.2d:%.2d = %ld seconds since 1969\n"
msgstr "Hardwarekloktijd is: %4d/%.2d/%.2d %.2d:%.2d:%.2d = %ld seconden sinds 1969.\n"

#: hwclock/hwclock.c:450
#, c-format
msgid "Time read from Hardware Clock: %4d/%.2d/%.2d %02d:%02d:%02d\n"
msgstr "Tijd gelezen van de hardwareklok: %4d/%.2d/%.2d %02d:%02d:%02d\n"

#: hwclock/hwclock.c:479
#, c-format
msgid "Setting Hardware Clock to %.2d:%.2d:%.2d = %ld seconds since 1969\n"
msgstr "Instellen van hardwareklok op %.2d:%.2d:%.2d = %ld seconden sinds 1969.\n"

#: hwclock/hwclock.c:485
#, c-format
msgid "Clock not changed - testing only.\n"
msgstr "Klok niet gewijzigd -- in testmodus.\n"

#: hwclock/hwclock.c:535
#, c-format
msgid ""
"Time elapsed since reference time has been %.6f seconds.\n"
"Delaying further to reach the new time.\n"
msgstr ""
"Verlopen tijd sinds laatste referentietijd is %.6f seconden.\n"
"Wordt verder uitgesteld om de nieuwe tijd te bereiken.\n"

#: hwclock/hwclock.c:571
#, c-format
msgid "The Hardware Clock registers contain values that are either invalid (e.g. 50th day of month) or beyond the range we can handle (e.g. Year 2095).\n"
msgstr "De hardwareklok bevat waarden die ofwel onjuist zijn (bijvoorbeeld de 50e dag van de maand) of buiten het ondersteunde bereik vallen (bijvoorbeeld het jaar 2095).\n"

#: hwclock/hwclock.c:581
#, c-format
msgid "%s  %.6f seconds\n"
msgstr "%s  %.6f seconden\n"

#: hwclock/hwclock.c:615
#, c-format
msgid "No --date option specified.\n"
msgstr "Er is geen optie '--date' gegeven.\n"

#: hwclock/hwclock.c:621
#, c-format
msgid "--date argument too long\n"
msgstr "argument van '--date' is te lang\n"

#: hwclock/hwclock.c:628
#, c-format
msgid ""
"The value of the --date option is not a valid date.\n"
"In particular, it contains quotation marks.\n"
msgstr ""
"Het argument van '--date' is geen geldige datum.\n"
"In het bijzonder bevat het aanhalingstekens.\n"

#: hwclock/hwclock.c:636
#, c-format
msgid "Issuing date command: %s\n"
msgstr "Uitvoering van 'date'-opdracht: %s\n"

#: hwclock/hwclock.c:640
msgid "Unable to run 'date' program in /bin/sh shell. popen() failed"
msgstr "Kan 'date'-programma niet in /bin/sh uitvoeren: popen() is mislukt"

#: hwclock/hwclock.c:648
#, c-format
msgid "response from date command = %s\n"
msgstr "Antwoord van 'date'-opdracht = %s\n"

#: hwclock/hwclock.c:650
#, c-format
msgid ""
"The date command issued by %s returned unexpected results.\n"
"The command was:\n"
"  %s\n"
"The response was:\n"
"  %s\n"
msgstr ""
"De 'date'-opdracht uitgevoerd door %s gaf onverwachte resultaten.\n"
"De opdracht was:\n"
"  %s\n"
"Het antwoord was:\n"
"  %s\n"

#: hwclock/hwclock.c:662
#, c-format
msgid ""
"The date command issued by %s returned something other than an integer where the converted time value was expected.\n"
"The command was:\n"
"  %s\n"
"The response was:\n"
" %s\n"
msgstr ""
"De 'date'-opdracht uitgevoerd door %s gaf geen geheel getal waar de geconverteerde tijdswaarde werd verwacht.\n"
"De opdracht was:\n"
"  %s\n"
"Het antwoord was:\n"
" %s\n"

#: hwclock/hwclock.c:673
#, c-format
msgid "date string %s equates to %ld seconds since 1969.\n"
msgstr "Datumtekst %s is gelijk aan %ld seconden sinds 1969.\n"

#: hwclock/hwclock.c:705
#, c-format
msgid "The Hardware Clock does not contain a valid time, so we cannot set the System Time from it.\n"
msgstr "De hardwareklok bevat geen geldige tijd, zodat de systeemtijd er niet mee ingesteld kan worden.\n"

#: hwclock/hwclock.c:727 hwclock/hwclock.c:804
#, c-format
msgid "Calling settimeofday:\n"
msgstr "Aanroep van settimeofday():\n"

#: hwclock/hwclock.c:728 hwclock/hwclock.c:806
#, c-format
msgid "\ttv.tv_sec = %ld, tv.tv_usec = %ld\n"
msgstr "\ttv.tv_sec = %ld, tv.tv_usec = %ld\n"

#: hwclock/hwclock.c:730 hwclock/hwclock.c:808
#, c-format
msgid "\ttz.tz_minuteswest = %d\n"
msgstr "\ttz.tz_minuteswest = %d\n"

#: hwclock/hwclock.c:733 hwclock/hwclock.c:811
#, c-format
msgid "Not setting system clock because running in test mode.\n"
msgstr "De systeemklok wordt niet ingesteld -- in testmodus.\n"

#: hwclock/hwclock.c:742 hwclock/hwclock.c:820
#, c-format
msgid "Must be superuser to set system clock.\n"
msgstr "U moet root zijn om de systeemklok in te kunnen stellen.\n"

#: hwclock/hwclock.c:745 hwclock/hwclock.c:823
msgid "settimeofday() failed"
msgstr "settimeofday() is mislukt"

#: hwclock/hwclock.c:781
#, c-format
msgid "Current system time: %ld = %s\n"
msgstr "Huidige systeemtijd: %ld = %s\n"

#: hwclock/hwclock.c:805
#, c-format
msgid "\tUTC: %s\n"
msgstr "\tUTC: %s\n"

#: hwclock/hwclock.c:852
#, c-format
msgid "Not adjusting drift factor because the Hardware Clock previously contained garbage.\n"
msgstr ""
"De verschuivingsfactor wordt niet aangepast,\n"
"omdat de hardwareklok eerder rommel bevatte.\n"

#: hwclock/hwclock.c:857
#, c-format
msgid ""
"Not adjusting drift factor because last calibration time is zero,\n"
"so history is bad and calibration startover is necessary.\n"
msgstr ""
"De verschuivingsfactor wordt niet aangepast\n"
"omdat de laatste calibratietijd nul was.\n"
"Er is dus geen bruikbare geschiedenis,\n"
"en een latere hercalibratie is nodig.\n"

#: hwclock/hwclock.c:863
#, c-format
msgid "Not adjusting drift factor because it has been less than a day since the last calibration.\n"
msgstr ""
"De verschuivingsfactor wordt niet aangepast,\n"
"omdat de vorige calibratie minder dan één dag geleden is.\n"

#: hwclock/hwclock.c:911
#, c-format
msgid ""
"Clock drifted %.1f seconds in the past %d seconds in spite of a drift factor of %f seconds/day.\n"
"Adjusting drift factor by %f seconds/day\n"
msgstr ""
"De klok is %.1f seconden verschoven in de laatste %d seconden,\n"
"ondanks een verschuivingsfactor van %f seconden/dag.\n"
"De verschuivingsfactor wordt met %f seconden/dag aangepast.\n"

#: hwclock/hwclock.c:961
#, c-format
msgid "Time since last adjustment is %d seconds\n"
msgstr "De verlopen tijd sinds de vorige aanpassing is %d seconden.\n"

#: hwclock/hwclock.c:963
#, c-format
msgid "Need to insert %d seconds and refer time back %.6f seconds ago\n"
msgstr ""
"Er moeten %d seconden worden ingevoegd,\n"
"en %.6f seconden zullen later verrekend worden.\n"

#: hwclock/hwclock.c:992
#, c-format
msgid "Not updating adjtime file because of testing mode.\n"
msgstr "Het bestand /etc/adjtime wordt niet aangepast -- in testmodus.\n"

#: hwclock/hwclock.c:993
#, c-format
msgid ""
"Would have written the following to %s:\n"
"%s"
msgstr ""
"Het volgende zou naar %s geschreven worden:\n"
"%s"

#: hwclock/hwclock.c:1001
#, c-format
msgid "Could not open file with the clock adjustment parameters in it (%s) for writing"
msgstr "Kan bestand met klokaanpassingsgegevens (%s) niet openen om te schrijven"

#: hwclock/hwclock.c:1006 hwclock/hwclock.c:1011
#, c-format
msgid "Could not update file with the clock adjustment parameters (%s) in it"
msgstr "Kan bestand met klokaanpassingsgegevens (%s) niet bijwerken"

#: hwclock/hwclock.c:1017
#, c-format
msgid "Drift adjustment parameters not updated.\n"
msgstr "De parameters voor de verschuivingsaanpassing zijn niet bijgewerkt.\n"

#: hwclock/hwclock.c:1058
#, c-format
msgid "The Hardware Clock does not contain a valid time, so we cannot adjust it.\n"
msgstr "De hardwareklok bevat geen geldige tijd, zodat die niet aangepast kan worden.\n"

#: hwclock/hwclock.c:1066
#, c-format
msgid "Not setting clock because last adjustment time is zero, so history is bad."
msgstr ""
"De klok wordt niet ingesteld\n"
"omdat de laatste aanpassingstijd nul is.\n"
"Er is dus geen bruikbare geschiedenis."

#: hwclock/hwclock.c:1089
#, c-format
msgid "Needed adjustment is less than one second, so not setting clock.\n"
msgstr ""
"De benodigde aanpassing is minder dan één seconde;\n"
"de klok wordt niet veranderd.\n"

#: hwclock/hwclock.c:1115
#, c-format
msgid "Using %s.\n"
msgstr "%s wordt gebruikt.\n"

#: hwclock/hwclock.c:1117
#, c-format
msgid "No usable clock interface found.\n"
msgstr "Geen bruikbare klok-interface gevonden.\n"

#: hwclock/hwclock.c:1221 hwclock/hwclock.c:1227
#, c-format
msgid "Unable to set system clock.\n"
msgstr "Instellen van de systeemklok is mislukt.\n"

#: hwclock/hwclock.c:1240
#, c-format
msgid "At %ld seconds after 1969, RTC is predicted to read %ld seconds after 1969.\n"
msgstr "Op %ld seconden na 1969 is de voorspelde waarde van RTC %ld seconden na 1969.\n"

#: hwclock/hwclock.c:1271
#, c-format
msgid ""
"The kernel keeps an epoch value for the Hardware Clock only on an Alpha machine.\n"
"This copy of hwclock was built for a machine other than Alpha\n"
"(and thus is presumably not running on an Alpha now).  No action taken.\n"
msgstr ""
"De kernel bewaart alleen bij Alpha's een tijdperkwaarde voor de hardwareklok.\n"
"Deze versie van 'hwclock' is gemaakt voor een ander systeem dan de Alpha\n"
"(en draait nu dus vermoedelijk niet op een Alpha).  Geen actie ondernomen.\n"

#: hwclock/hwclock.c:1280
#, c-format
msgid "Unable to get the epoch value from the kernel.\n"
msgstr "Verkrijgen van de tijdperkwaarde van de kernel is mislukt.\n"

#: hwclock/hwclock.c:1282
#, c-format
msgid "Kernel is assuming an epoch value of %lu\n"
msgstr "Kernel neemt als tijdperkwaarde %lu aan.\n"

#: hwclock/hwclock.c:1285
#, c-format
msgid "To set the epoch value, you must use the 'epoch' option to tell to what value to set it.\n"
msgstr "Om de tijdperkwaarde in te stellen dient u de optie --epoch te gebruiken.\n"

#: hwclock/hwclock.c:1288
#, c-format
msgid "Not setting the epoch to %d - testing only.\n"
msgstr "Tijdperk wordt niet ingesteld op %d -- in testmodus.\n"

#: hwclock/hwclock.c:1291
#, c-format
msgid "Unable to set the epoch value in the kernel.\n"
msgstr "Instellen van de tijdperkwaarde in de kernel is mislukt.\n"

#: hwclock/hwclock.c:1304 misc-utils/cal.c:348 misc-utils/kill.c:189
#, c-format
msgid "%s from %s\n"
msgstr "'%s' uit %s\n"

#: hwclock/hwclock.c:1325
#, c-format
msgid ""
"hwclock - query and set the hardware clock (RTC)\n"
"\n"
"Usage: hwclock [function] [options...]\n"
"\n"
"Functions:\n"
"  -h | --help         show this help\n"
"  -r | --show         read hardware clock and print result\n"
"       --set          set the rtc to the time given with --date\n"
"  -s | --hctosys      set the system time from the hardware clock\n"
"  -w | --systohc      set the hardware clock to the current system time\n"
"       --systz        set the system time based on the current timezone\n"
"       --adjust       adjust the rtc to account for systematic drift since\n"
"                      the clock was last set or adjusted\n"
"       --getepoch     print out the kernel's hardware clock epoch value\n"
"       --setepoch     set the kernel's hardware clock epoch value to the \n"
"                      value given with --epoch\n"
"       --predict      predict rtc reading at time given with --date\n"
"  -v | --version      print out the version of hwclock to stdout\n"
"\n"
"Options: \n"
"  -u | --utc          the hardware clock is kept in UTC\n"
"       --localtime    the hardware clock is kept in local time\n"
"  -f | --rtc=path     special /dev/... file to use instead of default\n"
"       --directisa    access the ISA bus directly instead of %s\n"
"       --badyear      ignore rtc's year because the bios is broken\n"
"       --date         specifies the time to which to set the hardware clock\n"
"       --epoch=year   specifies the year which is the beginning of the \n"
"                      hardware clock's epoch value\n"
"       --noadjfile    do not access /etc/adjtime. Requires the use of\n"
"                      either --utc or --localtime\n"
"       --adjfile=path specifies the path to the adjust file (default is\n"
"                      /etc/adjtime)\n"
"       --test         do everything except actually updating the hardware\n"
"                      clock or anything else\n"
"  -D | --debug        debug mode\n"
"\n"
msgstr ""
"hwclock - de hardwareklok (RTC) instellen of waarden weergeven\n"
"\n"
"Gebruik:  hwclock [functie] [opties...]\n"
"\n"
"Functies:\n"
"  -h|--help        deze hulptekst tonen\n"
"  -r|--show        de hardwareklok lezen en het resultaat weergeven\n"
"     --set         de hardwareklok instellen op de tijd gegeven met '--date'\n"
"  -s|--hctosys     aan de hand van de hardwareklok de systeemklok instellen\n"
"  -w|--systohc     aan de hand van de systeemklok de hardwareklok instellen\n"
"     --systz       de systeemklok instellen aan de hand van de tijdzone\n"
"     --adjust      de hardwareklok aanpassen ter compensatie van systematische\n"
"                   verschuiving sinds de laatste instelling/aanpassing\n"
"     --getepoch    tijdperkwaarde van de kernel tonen\n"
"     --setepoch    tijdperkwaarde van de kernel instellen op de waarde\n"
"                   gegeven met de optie '--epoch'\n"
"     --predict     hardwarekloktijd voorspellen op moment gegeven met '--date'\n"
"  -v|--version     programmaversie tonen\n"
"\n"
"Opties: \n"
"  -u|--utc         de hardwareklok bevat de gecoördineerde universele tijd\n"
"     --localtime   de hardwareklok bevat de lokale tijd\n"
"  -f|--rtc=BESTAND te gebruiken RTC-bestand in /dev/ in plaats van standaard\n"
"     --directisa   de ISA-bus direct benaderen in plaats van via %s\n"
"     --badyear     het jaartal van de hardwareklok negeren omdat de BIOS stuk is\n"
"     --date=TIJD   de tijd waarop de hardwareklok moet worden ingesteld\n"
"     --epoch=JAAR  het jaartal dat het tijdperkbegin voor de hardwareklok is\n"
"     --noadjfile   /etc/adjtime niet gebruiken (met '--utc' of '--localtime')\n"
"     --adjfile=BESTAND  te gebruiken verschuivingsregistratiebestand\n"
"                        (standaard is /etc/adjtime)\n"
"     --test        alles doen behalve daadwerkelijk iets veranderen\n"
"  -D|--debug       debug-modus inschakelen\n"
"\n"

#: hwclock/hwclock.c:1361
#, c-format
msgid ""
"  -J|--jensen, -A|--arc, -S|--srm, -F|--funky-toy\n"
"       tell hwclock the type of alpha you have (see hwclock(8))\n"
"\n"
msgstr ""
"  -J|--jensen, -A|--arc, -S|--srm, -F|--funky-toy\n"
"                   het soort Alpha dat u gebruikt  (zie hwclock(8))\n"
"\n"

#: hwclock/hwclock.c:1449
#, c-format
msgid "%s: Unable to connect to audit system\n"
msgstr "%s: Kan geen verbinding maken met auditsysteem\n"

#: hwclock/hwclock.c:1570
#, c-format
msgid "%s takes no non-option arguments.  You supplied %d.\n"
msgstr ""
"%s kent geen andere argumenten dan functies en opties.\n"
"U gaf %d.\n"

#: hwclock/hwclock.c:1577
#, c-format
msgid ""
"You have specified multiple functions.\n"
"You can only perform one function at a time.\n"
msgstr ""
"U hebt verschillende functies aangegeven.\n"
"Per aanroep kan slechts één functie worden gebruikt.\n"

#: hwclock/hwclock.c:1584
#, c-format
msgid "%s: The --utc and --localtime options are mutually exclusive.  You specified both.\n"
msgstr "%s: De opties --utc en --localtime sluiten elkaar uit.\n"

#: hwclock/hwclock.c:1591
#, c-format
msgid "%s: The --adjust and --noadjfile options are mutually exclusive.  You specified both.\n"
msgstr "%s: De opties --adjust en --noadjfile sluiten elkaar uit.\n"

#: hwclock/hwclock.c:1598
#, c-format
msgid "%s: The --adjfile and --noadjfile options are mutually exclusive.  You specified both.\n"
msgstr "%s: De opties --adjfile en --noadjfile sluiten elkaar uit.\n"

#: hwclock/hwclock.c:1607
#, c-format
msgid "%s: With --noadjfile, you must specify either --utc or --localtime\n"
msgstr "%s: Bij --noadjfile moet u of --utc of --localtime aangeven.\n"

#: hwclock/hwclock.c:1621
#, c-format
msgid "No usable set-to time.  Cannot set clock.\n"
msgstr "Geen bruikbare insteltijd.  Kan klok niet instellen.\n"

#: hwclock/hwclock.c:1638
#, c-format
msgid "Sorry, only the superuser can change the Hardware Clock.\n"
msgstr "Sorry, alleen root kan de hardwareklok instellen.\n"

#: hwclock/hwclock.c:1643
#, c-format
msgid "Sorry, only the superuser can change the System Clock.\n"
msgstr "Sorry, alleen root kan de systeemklok instellen.\n"

#: hwclock/hwclock.c:1648
#, c-format
msgid "Sorry, only the superuser can change the Hardware Clock epoch in the kernel.\n"
msgstr "Sorry, alleen root kan in de kernel de tijdperkwaarde voor de klok instellen.\n"

#: hwclock/hwclock.c:1669
#, c-format
msgid "Cannot access the Hardware Clock via any known method.\n"
msgstr "Kan op geen enkele bekende manier toegang krijgen tot de hardwareklok.\n"

#: hwclock/hwclock.c:1673
#, c-format
msgid "Use the --debug option to see the details of our search for an access method.\n"
msgstr ""
"Gebruik de optie --debug om alle details over de zoektocht\n"
"naar een toegangsmethode te zien.\n"

#: hwclock/kd.c:54
#, c-format
msgid "Waiting in loop for time from KDGHWCLK to change\n"
msgstr "Wachten in lus totdat de tijd van ioctl(KDGHWCLK) verandert...\n"

#: hwclock/kd.c:57
msgid "KDGHWCLK ioctl to read time failed"
msgstr "Het lezen van de tijd via ioctl(KDGHWCLK) is mislukt"

#: hwclock/kd.c:75
msgid "KDGHWCLK ioctl to read time failed in loop"
msgstr "Het lezen van de tijd via ioctl(KDGHWCLK) is mislukt tijdens de lus"

#: hwclock/kd.c:82 hwclock/rtc.c:221
#, c-format
msgid "Timed out waiting for time change.\n"
msgstr "Wachten op veranderende tijd duurde te lang.\n"

#: hwclock/kd.c:104
#, c-format
msgid "ioctl() failed to read time from %s"
msgstr "ioctl() kan geen tijd lezen uit %s"

#: hwclock/kd.c:140
msgid "ioctl KDSHWCLK failed"
msgstr "ioctl(KDSHWCLK) is mislukt"

#: hwclock/kd.c:176
msgid "Can't open /dev/tty1 or /dev/vc/1"
msgstr "Openen van /dev/tty1 of /dev/vc/1 is mislukt"

#: hwclock/kd.c:180
msgid "KDGHWCLK ioctl failed"
msgstr "ioctl(KDGHWCLK) is mislukt"

#: hwclock/rtc.c:147 hwclock/rtc.c:241
#, c-format
msgid "open() of %s failed"
msgstr "open() van %s is mislukt"

#: hwclock/rtc.c:181
#, c-format
msgid "ioctl() to %s to read the time failed.\n"
msgstr "ioctl() op %s om de tijd te lezen is mislukt\n"

#: hwclock/rtc.c:203
#, c-format
msgid "Waiting in loop for time from %s to change\n"
msgstr "Wachten in lus totdat de tijd van %s verandert...\n"

#: hwclock/rtc.c:259
#, c-format
msgid "%s does not have interrupt functions. "
msgstr "Apparaat %s heeft geen onderbrekingsfuncties. "

#: hwclock/rtc.c:270
#, c-format
msgid "read() to %s to wait for clock tick failed"
msgstr "read() van %s voor wachten op kloktik is mislukt"

#: hwclock/rtc.c:288
#, c-format
msgid "select() to %s to wait for clock tick failed"
msgstr "select() van %s voor wachten op kloktik is mislukt"

#: hwclock/rtc.c:291
#, c-format
msgid "select() to %s to wait for clock tick timed out\n"
msgstr "select() van %s voor wachten op kloktik duurde te lang\n"

#: hwclock/rtc.c:300
#, c-format
msgid "ioctl() to %s to turn off update interrupts failed"
msgstr "ioctl() op %s om bijwerkingsonderbrekingen uit te zetten is mislukt"

#: hwclock/rtc.c:303
#, c-format
msgid "ioctl() to %s to turn on update interrupts failed unexpectedly"
msgstr "ioctl() op %s om bijwerkingsonderbrekingen aan te zetten is onverwacht mislukt"

#: hwclock/rtc.c:360
#, c-format
msgid "ioctl() to %s to set the time failed.\n"
msgstr "ioctl() op %s om tijd in te stellen is mislukt\n"

#: hwclock/rtc.c:366
#, c-format
msgid "ioctl(%s) was successful.\n"
msgstr "ioctl(%s) is geslaagd\n"

#: hwclock/rtc.c:392
#, c-format
msgid "Open of %s failed"
msgstr "Openen van %s is mislukt"

#: hwclock/rtc.c:410 hwclock/rtc.c:454
#, c-format
msgid "To manipulate the epoch value in the kernel, we must access the Linux 'rtc' device driver via the device special file %s.  This file does not exist on this system.\n"
msgstr ""
"Om de tijdperkwaarde in de kernel aan te kunnen passen, is toegang\n"
"tot het 'rtc'-stuurprogramma van Linux nodig via het speciale\n"
"apparaatbestand %s.  Dit bestand bestaat niet op dit systeem.\n"

#: hwclock/rtc.c:415 hwclock/rtc.c:459
#, c-format
msgid "Unable to open %s"
msgstr "Openen van %s is mislukt"

#: hwclock/rtc.c:422
#, c-format
msgid "ioctl(RTC_EPOCH_READ) to %s failed"
msgstr "ioctl(RTC_EPOCH_READ) op %s is mislukt"

#: hwclock/rtc.c:427
#, c-format
msgid "we have read epoch %ld from %s with RTC_EPOCH_READ ioctl.\n"
msgstr "De tijdperkwaarde %ld is gelezen uit %s met ioctl(RTC_EPOCH_READ).\n"

#: hwclock/rtc.c:446
#, c-format
msgid "The epoch value may not be less than 1900.  You requested %ld\n"
msgstr "De tijdperkwaarde mag niet minder zijn dan 1900.  U vroeg om %ld.\n"

#: hwclock/rtc.c:464
#, c-format
msgid "setting epoch to %ld with RTC_EPOCH_SET ioctl to %s.\n"
msgstr "Schrijven van tijdperkwaarde op %ld naar %s met ioctl(RTC_EPOCH_SET).\n"

#: hwclock/rtc.c:469
#, c-format
msgid "The kernel device driver for %s does not have the RTC_EPOCH_SET ioctl.\n"
msgstr "Het kernelstuurprogramma voor %s heeft geen ioctl(RTC_EPOCH_SET).\n"

#: hwclock/rtc.c:472
#, c-format
msgid "ioctl(RTC_EPOCH_SET) to %s failed"
msgstr "ioctl(RTC_EPOCH_SET) op %s is mislukt"

#: login-utils/agetty.c:360
#, c-format
msgid "%s: can't exec %s: %m"
msgstr "%s: kan %s niet uitvoeren: %m"

#: login-utils/agetty.c:383
msgid "can't malloc initstring"
msgstr "onvoldoende geheugen beschikbaar voor starttekenreeks"

#: login-utils/agetty.c:448
#, c-format
msgid "bad timeout value: %s"
msgstr "ongeldige tijdslimiet: %s"

#: login-utils/agetty.c:525
#, c-format
msgid "bad speed: %s"
msgstr "ongeldige snelheid: %s"

#: login-utils/agetty.c:527
msgid "too many alternate speeds"
msgstr "te veel alternatieve snelheden"

#: login-utils/agetty.c:629
#, c-format
msgid "/dev: chdir() failed: %m"
msgstr "/dev: chdir() is mislukt: %m"

#: login-utils/agetty.c:633
#, c-format
msgid "/dev/%s: not a character device"
msgstr "/dev/%s: is geen byte-apparaat"

#: login-utils/agetty.c:642
#, c-format
msgid "/dev/%s: cannot open as standard input: %m"
msgstr "/dev/%s: kan deze niet openen als standaardinvoer: %m"

#: login-utils/agetty.c:652
#, c-format
msgid "%s: not open for read/write"
msgstr "%s: is niet open voor lezen-en-schrijven"

#: login-utils/agetty.c:658
#, c-format
msgid "%s: dup problem: %m"
msgstr "%s: probleem met verdubbelen van standaardinvoer en -uitvoer: %m"

#: login-utils/agetty.c:945
#, c-format
msgid "user"
msgstr "gebruiker"

#: login-utils/agetty.c:945
#, c-format
msgid "users"
msgstr "gebruikers"

#: login-utils/agetty.c:1030
#, c-format
msgid "%s: read: %m"
msgstr "%s: gelezen: %m"

#: login-utils/agetty.c:1077
#, c-format
msgid "%s: input overrun"
msgstr "%s: invoeroverloop"

#: login-utils/agetty.c:1206
#, c-format
msgid ""
"Usage: %s [-8hiLmUw] [-l login_program] [-t timeout] [-I initstring] [-H login_host] baud_rate,... line [termtype]\n"
"or\t[-hiLmw] [-l login_program] [-t timeout] [-I initstring] [-H login_host] line baud_rate,... [termtype]\n"
msgstr ""
"Gebruik:  %s [-8hiLmUw] [-l inlogprogramma] [-t tijdslimiet] [-H inloghost]\n"
"          [-I starttekenreeks]  baudrate,...  lijn  [terminalsoort]\n"
"     of:  [-hiLmw] [-l inlogprogramma] [-t tijdslimiet] [-H inloghost]\n"
"          [-I starttekenreeks]  lijn  baudrate,...  [terminalsoort]\n"

#: login-utils/checktty.c:91 login-utils/checktty.c:112
#, c-format
msgid "login: memory low, login may fail\n"
msgstr "login: er is weinig vrij geheugen, inloggen kan mislukken\n"

#: login-utils/checktty.c:92
msgid "can't malloc for ttyclass"
msgstr "malloc() voor ttyclass is mislukt"

#: login-utils/checktty.c:113
msgid "can't malloc for grplist"
msgstr "malloc() voor grplist is mislukt"

#: login-utils/checktty.c:554
#, c-format
msgid "Login on %s from %s denied by default.\n"
msgstr "Inloggen op %s vanaf %s wordt standaard geweigerd.\n"

#: login-utils/checktty.c:565
#, c-format
msgid "Login on %s from %s denied.\n"
msgstr "Inloggen op %s vanaf %s is geweigerd.\n"

#: login-utils/chfn.c:133 login-utils/chsh.c:119
#, c-format
msgid "%s: you (user %d) don't exist.\n"
msgstr "%s: gebruiker %d (oftewel u) bestaat niet.\n"

#: login-utils/chfn.c:140 login-utils/chsh.c:126
#, c-format
msgid "%s: user \"%s\" does not exist.\n"
msgstr "%s: gebruiker '%s' bestaat niet.\n"

#: login-utils/chfn.c:145 login-utils/chsh.c:131
#, c-format
msgid "%s: can only change local entries; use yp%s instead.\n"
msgstr "%s: kan alleen lokale zaken wijzigen; gebruik yp%s in plaats.\n"

#: login-utils/chfn.c:156 login-utils/chsh.c:142
msgid "Unknown user context"
msgstr "Onbekende gebruikerscontext"

#: login-utils/chfn.c:157
#, c-format
msgid "%s: %s is not authorized to change the finger info of %s\n"
msgstr "%s: %s is niet gerechtigd om de finger-informatie van %s te wijzigen\n"

#: login-utils/chfn.c:164 login-utils/chsh.c:150
#, c-format
msgid "%s: Can't set default context for /etc/passwd"
msgstr "%s: Kan standaardcontext voor /etc/passwd niet instellen"

#: login-utils/chfn.c:178
#, c-format
msgid "Changing finger information for %s.\n"
msgstr "Wijzigen van finger-informatie voor %s.\n"

#: login-utils/chfn.c:189 login-utils/chsh.c:188 login-utils/login.c:576
#, c-format
msgid "%s: PAM failure, aborting: %s\n"
msgstr "%s: PAM-fout -- gestopt: %s\n"

#: login-utils/chfn.c:212 login-utils/chsh.c:211 login-utils/login.c:827
#: login-utils/newgrp.c:79 login-utils/simpleinit.c:340 mount/lomount.c:742
#: mount/lomount.c:745
msgid "Password: "
msgstr "Wachtwoord: "

#: login-utils/chfn.c:215 login-utils/chsh.c:214
msgid "Incorrect password."
msgstr "Onjuist wachtwoord."

#: login-utils/chfn.c:226
#, c-format
msgid "Finger information not changed.\n"
msgstr "Finger-informatie is niet gewijzigd.\n"

#: login-utils/chfn.c:328
#, c-format
msgid "Usage: %s [ -f full-name ] [ -o office ] "
msgstr "Gebruik:  %s [-f volledige_naam] [-o kantoor] "

#: login-utils/chfn.c:329
#, c-format
msgid ""
"[ -p office-phone ]\n"
"\t[ -h home-phone ] "
msgstr ""
"[-p kantoortelefoon]\n"
"              [-h thuistelefoon] "

#: login-utils/chfn.c:330
#, c-format
msgid "[ --help ] [ --version ]\n"
msgstr "[--help] [--version]\n"

#: login-utils/chfn.c:378
msgid "Office"
msgstr "Kantoor"

#: login-utils/chfn.c:379
msgid "Office Phone"
msgstr "Kantoortelefoon"

#: login-utils/chfn.c:380
msgid "Home Phone"
msgstr "Thuistelefoon"

#: login-utils/chfn.c:401 login-utils/chsh.c:321
#, c-format
msgid ""
"\n"
"Aborted.\n"
msgstr ""
"\n"
"Afgebroken.\n"

#: login-utils/chfn.c:434
#, c-format
msgid "field is too long.\n"
msgstr "veld is te lang.\n"

#: login-utils/chfn.c:442
#, c-format
msgid "'%c' is not allowed.\n"
msgstr "'%c' is niet toegestaan.\n"

#: login-utils/chfn.c:447
#, c-format
msgid "Control characters are not allowed.\n"
msgstr "Stuurtekens zijn niet toegestaan.\n"

#: login-utils/chfn.c:512
#, c-format
msgid "Finger information *NOT* changed.  Try again later.\n"
msgstr "Finger-informatie is NIET gewijzigd.  Probeer het later opnieuw.\n"

#: login-utils/chfn.c:515
#, c-format
msgid "Finger information changed.\n"
msgstr "Finger-informatie is gewijzigd.\n"

#: login-utils/chsh.c:143
#, c-format
msgid "%s: %s is not authorized to change the shell of %s\n"
msgstr "%s: %s is niet gerechtigd om de shell van %s te wijzigen\n"

#: login-utils/chsh.c:164
#, c-format
msgid "%s: Running UID doesn't match UID of user we're altering, shell change denied\n"
msgstr ""
"%s: Het uitvoerende UID komt niet overeen met de UID van de gebruiker\n"
"wiens gegevens worden gewijzigd -- shell-wijziging is geweigerd.\n"

#: login-utils/chsh.c:170
#, c-format
msgid "%s: Your shell is not in /etc/shells, shell change denied\n"
msgstr "%s: Uw huidige shell staat niet in /etc/shells -- shell-wijziging is geweigerd.\n"

#: login-utils/chsh.c:177
#, c-format
msgid "Changing shell for %s.\n"
msgstr "Wijzigen van standaard-shell voor %s.\n"

#: login-utils/chsh.c:222
msgid "New shell"
msgstr "Nieuwe shell"

#: login-utils/chsh.c:229
#, c-format
msgid "Shell not changed.\n"
msgstr "Shell is niet gewijzigd.\n"

#: login-utils/chsh.c:235
#, c-format
msgid "Shell *NOT* changed.  Try again later.\n"
msgstr "Shell is NIET gewijzigd.  Probeer het later opnieuw.\n"

#: login-utils/chsh.c:238
#, c-format
msgid "Shell changed.\n"
msgstr "Shell is gewijzigd.\n"

#: login-utils/chsh.c:303
#, c-format
msgid ""
"Usage: %s [ -s shell ] [ --list-shells ] [ --help ] [ --version ]\n"
"       [ username ]\n"
msgstr ""
"Gebruik:  %s [ -s shell ] [ gebruikersnaam ]\n"
"          chsh [ --list-shells ] [ --help ] [ --version ]\n"

#: login-utils/chsh.c:349
#, c-format
msgid "%s: shell must be a full path name.\n"
msgstr "%s: shell moet een volledige padnaam zijn.\n"

#: login-utils/chsh.c:353
#, c-format
msgid "%s: \"%s\" does not exist.\n"
msgstr "%s: '%s' bestaat niet.\n"

#: login-utils/chsh.c:357
#, c-format
msgid "%s: \"%s\" is not executable.\n"
msgstr "%s: '%s' is niet uitvoerbaar.\n"

#: login-utils/chsh.c:364
#, c-format
msgid "%s: '%c' is not allowed.\n"
msgstr "%s: '%c' is niet toegestaan.\n"

#: login-utils/chsh.c:368
#, c-format
msgid "%s: Control characters are not allowed.\n"
msgstr "%s: Stuurtekens zijn niet toegestaan.\n"

#: login-utils/chsh.c:375 login-utils/chsh.c:385
#, c-format
msgid "Warning: \"%s\" is not listed in /etc/shells.\n"
msgstr "Waarschuwing: '%s' staat niet in /etc/shells\n"

#: login-utils/chsh.c:377
#, c-format
msgid "%s: \"%s\" is not listed in /etc/shells.\n"
msgstr "%s: '%s' staat niet in /etc/shells\n"

#: login-utils/chsh.c:379
#, c-format
msgid "%s: Use -l option to see list.\n"
msgstr "%s: Gebruik optie '-l' om de lijst te zien\n"

#: login-utils/chsh.c:386
#, c-format
msgid "Use %s -l to see list.\n"
msgstr "Gebruik '%s -l' om de lijst te zien.\n"

#: login-utils/chsh.c:406
#, c-format
msgid "No known shells.\n"
msgstr "Geen bekende shells.\n"

#: login-utils/islocal.c:87
#, c-format
msgid "Failed to open %s for reading, exiting."
msgstr "Kan %s niet openen om te lezen -- gestopt"

#: login-utils/last.c:148
msgid "usage: last [-#] [-f file] [-t tty] [-h hostname] [user ...]\n"
msgstr "Gebruik:  last [-#] [-f bestand] [-t tty] [-h hostnaam] [gebruiker ...]\n"

#: login-utils/last.c:302
msgid "  still logged in"
msgstr "  nog ingelogd"

#: login-utils/last.c:324
#, c-format
msgid ""
"\n"
"wtmp begins %s"
msgstr ""
"\n"
"wtmp begint %s"

#: login-utils/last.c:380 login-utils/last.c:398 login-utils/last.c:449
msgid "last: malloc failure.\n"
msgstr "last: malloc() is mislukt\n"

#: login-utils/last.c:425
msgid "last: gethostname"
msgstr "last: gethostname() is mislukt"

#: login-utils/last.c:474
#, c-format
msgid ""
"\n"
"interrupted %10.10s %5.5s \n"
msgstr ""
"\n"
"onderbroken %10.10s %5.5s \n"

#: login-utils/login.c:197
#, c-format
msgid "FATAL: can't reopen tty: %s"
msgstr "FATAAL: kan tty niet heropenen: %s"

#: login-utils/login.c:205
#, c-format
msgid "FATAL: %s is not a terminal"
msgstr "FATAAL: %s is geen terminal"

#: login-utils/login.c:238
msgid "FATAL: bad tty"
msgstr "FATAAL: slechte tty"

#: login-utils/login.c:445
#, c-format
msgid "login: -h for super-user only.\n"
msgstr "login: optie '-h' kan alleen door root gebruikt worden\n"

#: login-utils/login.c:488
#, c-format
msgid "usage: login [-fp] [username]\n"
msgstr "Gebruik:  login [-fp] [gebruikersnaam]\n"

#: login-utils/login.c:578
#, c-format
msgid "Couldn't initialize PAM: %s"
msgstr "Kan PAM niet initialiseren: %s"

#: login-utils/login.c:595
msgid "login: "
msgstr "inlognaam: "

#: login-utils/login.c:639
#, c-format
msgid "FAILED LOGIN %d FROM %s FOR %s, %s"
msgstr "INLOGPOGING %d IS MISLUKT VANAF %s VOOR %s -- %s"

#: login-utils/login.c:644
#, c-format
msgid ""
"Login incorrect\n"
"\n"
msgstr ""
"Inloggegevens onjuist\n"
"\n"

#: login-utils/login.c:653
#, c-format
msgid "TOO MANY LOGIN TRIES (%d) FROM %s FOR %s, %s"
msgstr "TE VEEL INLOGPOGINGEN (%d) VANAF %s VOOR %s -- %s"

#: login-utils/login.c:657
#, c-format
msgid "FAILED LOGIN SESSION FROM %s FOR %s, %s"
msgstr "INLOGSESSIE IS MISLUKT VANAF %s VOOR %s -- %s"

#: login-utils/login.c:662
#, c-format
msgid ""
"\n"
"Login incorrect\n"
msgstr ""
"\n"
"Inloggegevens onjuist\n"

#: login-utils/login.c:690 login-utils/login.c:697 login-utils/login.c:731
#, c-format
msgid ""
"\n"
"Session setup problem, abort.\n"
msgstr ""
"\n"
"Sessie-instellingsprobleem -- gestopt\n"

#: login-utils/login.c:691
#, c-format
msgid "NULL user name in %s:%d. Abort."
msgstr "Lege gebruikersnaam in %s:%d -- gestopt"

#: login-utils/login.c:698
#, c-format
msgid "Invalid user name \"%s\" in %s:%d. Abort."
msgstr "Onjuiste gebruikersnaam '%s' in %s:%d -- gestopt"

#: login-utils/login.c:717
#, c-format
msgid "login: Out of memory\n"
msgstr "login: Onvoldoende geheugen beschikbaar\n"

#: login-utils/login.c:761
msgid "Illegal username"
msgstr "Ongeldige gebruikersnaam"

#: login-utils/login.c:804
#, c-format
msgid "%s login refused on this terminal.\n"
msgstr "Inloggen door %s op deze terminal is geweigerd.\n"

#: login-utils/login.c:809
#, c-format
msgid "LOGIN %s REFUSED FROM %s ON TTY %s"
msgstr "INLOGGEN DOOR %s VANAF %s IS GEWEIGERD OP TTY %s"

#: login-utils/login.c:813
#, c-format
msgid "LOGIN %s REFUSED ON TTY %s"
msgstr "INLOGGEN DOOR %s IS GEWEIGERD OP TTY %s"

#: login-utils/login.c:867
#, c-format
msgid "Login incorrect\n"
msgstr "Inloggegevens onjuist\n"

#: login-utils/login.c:1092
#, c-format
msgid "DIALUP AT %s BY %s"
msgstr "INBELLEN OP %s DOOR %s"

#: login-utils/login.c:1099
#, c-format
msgid "ROOT LOGIN ON %s FROM %s"
msgstr "ROOT-LOGIN OP %s VANAF %s"

#: login-utils/login.c:1102
#, c-format
msgid "ROOT LOGIN ON %s"
msgstr "ROOT-LOGIN OP %s"

#: login-utils/login.c:1105
#, c-format
msgid "LOGIN ON %s BY %s FROM %s"
msgstr "LOGIN OP %s DOOR %s VANAF %s"

#: login-utils/login.c:1108
#, c-format
msgid "LOGIN ON %s BY %s"
msgstr "LOGIN OP %s DOOR %s"

#: login-utils/login.c:1129
#, c-format
msgid "You have new mail.\n"
msgstr "U hebt nieuwe e-mail.\n"

#: login-utils/login.c:1131
#, c-format
msgid "You have mail.\n"
msgstr "U hebt e-mail.\n"

#: login-utils/login.c:1175
#, c-format
msgid "login: failure forking: %s"
msgstr "login: kan geen nieuw proces starten: %s"

#: login-utils/login.c:1222
#, c-format
msgid "TIOCSCTTY failed: %m"
msgstr "ioctl(TIOCSCTTY) is mislukt: %m"

#: login-utils/login.c:1228
msgid "setuid() failed"
msgstr "setuid() is mislukt"

#: login-utils/login.c:1234
#, c-format
msgid "No directory %s!\n"
msgstr "Er is geen map %s!\n"

#: login-utils/login.c:1238
#, c-format
msgid "Logging in with home = \"/\".\n"
msgstr "Ingelogd met home = '/'.\n"

#: login-utils/login.c:1246
#, c-format
msgid "login: no memory for shell script.\n"
msgstr "login: onvoldoende geheugen beschikbaar voor shell-script\n"

#: login-utils/login.c:1273
#, c-format
msgid "login: couldn't exec shell script: %s.\n"
msgstr "login: kan shell-script niet uitvoeren: %s\n"

#: login-utils/login.c:1276
#, c-format
msgid "login: no shell: %s.\n"
msgstr "login: geen shell: %s\n"

#: login-utils/login.c:1291
#, c-format
msgid ""
"\n"
"%s login: "
msgstr ""
"\n"
"%s inlognaam: "

#: login-utils/login.c:1302
#, c-format
msgid "login name much too long.\n"
msgstr "inlognaam is veel te lang\n"

#: login-utils/login.c:1303
msgid "NAME too long"
msgstr "NAAM is te lang"

#: login-utils/login.c:1310
#, c-format
msgid "login names may not start with '-'.\n"
msgstr "inlognamen mogen niet beginnen met '-'\n"

#: login-utils/login.c:1320
#, c-format
msgid "too many bare linefeeds.\n"
msgstr "te veel witregels\n"

#: login-utils/login.c:1321
msgid "EXCESSIVE linefeeds"
msgstr "EXCESSIEF aantal witregels"

#: login-utils/login.c:1353
#, c-format
msgid "Login timed out after %d seconds\n"
msgstr "Inloggen duurde te lang: afgebroken na %d seconden.\n"

#: login-utils/login.c:1441
#, c-format
msgid "Last login: %.*s "
msgstr "Laatste keer ingelogd: %.*s "

#: login-utils/login.c:1445
#, c-format
msgid "from %.*s\n"
msgstr "vanaf %.*s\n"

#: login-utils/login.c:1448
#, c-format
msgid "on %.*s\n"
msgstr "op %.*s\n"

#: login-utils/login.c:1474
#, c-format
msgid "LOGIN FAILURE FROM %s, %s"
msgstr "INLOGGEN IS MISLUKT VANAF %s -- %s"

#: login-utils/login.c:1477
#, c-format
msgid "LOGIN FAILURE ON %s, %s"
msgstr "INLOGGEN IS MISLUKT OP %s -- %s"

#: login-utils/login.c:1481
#, c-format
msgid "%d LOGIN FAILURES FROM %s, %s"
msgstr "%d INLOGMISLUKKINGEN VANAF %s -- %s"

#: login-utils/login.c:1484
#, c-format
msgid "%d LOGIN FAILURES ON %s, %s"
msgstr "%d INLOGMISLUKKINGEN OP %s --  %s"

#: login-utils/mesg.c:89
#, c-format
msgid "is y\n"
msgstr "is 'y' (ja)\n"

#: login-utils/mesg.c:92
#, c-format
msgid "is n\n"
msgstr "is 'n' (nee)\n"

#: login-utils/mesg.c:112
#, c-format
msgid "usage: mesg [y | n]\n"
msgstr "Gebruik:  mesg [y|n]\n"

#: login-utils/newgrp.c:99
msgid "newgrp: Who are you?"
msgstr "newgrp: Wie bent u?"

#: login-utils/newgrp.c:107 login-utils/newgrp.c:121
msgid "newgrp: setgid"
msgstr "newgrp: setgid() is mislukt"

#: login-utils/newgrp.c:114 login-utils/newgrp.c:116
msgid "newgrp: No such group."
msgstr "newgrp: Die groep bestaat niet."

#: login-utils/newgrp.c:125
msgid "newgrp: Permission denied"
msgstr "newgrp: Toegang geweigerd"

#: login-utils/newgrp.c:132
msgid "newgrp: setuid"
msgstr "newgrp: setuid() is mislukt"

#: login-utils/newgrp.c:138
msgid "No shell"
msgstr "Geen shell"

#: login-utils/shutdown.c:116
#, c-format
msgid "Usage: shutdown [-h|-r] [-fqs] [now|hh:ss|+mins]\n"
msgstr "Gebruik:  shutdown [-h|-r] [-fqs] [now|uu:ss|+minuten]\n"

#: login-utils/shutdown.c:134
msgid "Shutdown process aborted"
msgstr "Afsluitingsproces is afgebroken."

#: login-utils/shutdown.c:165
#, c-format
msgid "%s: Only root can shut a system down.\n"
msgstr "%s: Alleen root kan een systeem afsluiten.\n"

#: login-utils/shutdown.c:259
#, c-format
msgid "That must be tomorrow, can't you wait till then?\n"
msgstr "Dat moet morgen zijn; kunt u niet tot dan wachten?\n"

#: login-utils/shutdown.c:310
msgid "for maintenance; bounce, bounce"
msgstr "voor onderhoud -- joepie"

#: login-utils/shutdown.c:339
msgid "The system is being shut down within 5 minutes"
msgstr "Het systeem wordt binnen vijf minuten afgesloten."

#: login-utils/shutdown.c:343
msgid "Login is therefore prohibited."
msgstr "Inloggen is daarom niet toegestaan."

#: login-utils/shutdown.c:365
#, c-format
msgid "rebooted by %s: %s"
msgstr "opnieuw gestart door %s: %s"

#: login-utils/shutdown.c:368
#, c-format
msgid "halted by %s: %s"
msgstr "afgesloten door %s: %s"

#: login-utils/shutdown.c:432
msgid ""
"\n"
"Why am I still alive after reboot?"
msgstr ""
"\n"
"Waarom leef ik nog na een herstart?"

#: login-utils/shutdown.c:434
msgid ""
"\n"
"Now you can turn off the power..."
msgstr ""
"\n"
"U kunt de computer nu uitschakelen..."

#: login-utils/shutdown.c:450
#, c-format
msgid "Calling kernel power-off facility...\n"
msgstr "De uitschakel-voorziening van de kernel wordt aangeroepen...\n"

#: login-utils/shutdown.c:453
#, c-format
msgid "Error powering off\t%s\n"
msgstr "Fout bij het uitschakelen\t%s\n"

#: login-utils/shutdown.c:461
#, c-format
msgid "Executing the program \"%s\" ...\n"
msgstr "Het programma '%s' wordt uitgevoerd...\n"

#: login-utils/shutdown.c:464
#, c-format
msgid "Error executing\t%s\n"
msgstr "Fout tijdens uitvoering: %s\n"

#: login-utils/shutdown.c:491
#, c-format
msgid "URGENT: broadcast message from %s:"
msgstr "BELANGRIJK: bericht van %s voor iedereen:"

#: login-utils/shutdown.c:497
#, c-format
msgid "System going down in %d hours %d minutes"
msgstr "Het systeem wordt over %d uur en %d minuten afgesloten."

#: login-utils/shutdown.c:500
#, c-format
msgid "System going down in 1 hour %d minutes"
msgstr "Het systeem wordt over 1 uur en %d minuten afgesloten."

#: login-utils/shutdown.c:503
#, c-format
msgid "System going down in %d minutes\n"
msgstr "Het systeem wordt over %d minuten afgesloten.\n"

#: login-utils/shutdown.c:506
#, c-format
msgid "System going down in 1 minute\n"
msgstr "Het systeem wordt over 1 minuut afgesloten.\n"

#: login-utils/shutdown.c:508
#, c-format
msgid "System going down IMMEDIATELY!\n"
msgstr "Het systeem wordt NU afgesloten!\n"

#: login-utils/shutdown.c:513
#, c-format
msgid "\t... %s ...\n"
msgstr "\t... %s ...\n"

#: login-utils/shutdown.c:570
msgid "Cannot fork for swapoff. Shrug!"
msgstr "fork() voor swapoff is mislukt -- nou ja"

#: login-utils/shutdown.c:578
msgid "Cannot exec swapoff, hoping umount will do the trick."
msgstr "Uitvoeren van swapoff is mislukt; hopelijk lost umount het op."

#: login-utils/shutdown.c:597
msgid "Cannot fork for umount, trying manually."
msgstr "fork() voor umount is mislukt; dan maar zonder nieuw proces."

#: login-utils/shutdown.c:606
#, c-format
msgid "Cannot exec %s, trying umount.\n"
msgstr "Uitvoeren van %s is mislukt; umount wordt geprobeerd.\n"

#: login-utils/shutdown.c:610
msgid "Cannot exec umount, giving up on umount."
msgstr "Uitvoeren van umount is mislukt -- gestopt"

#: login-utils/shutdown.c:615
msgid "Unmounting any remaining filesystems..."
msgstr "Ontkoppelen van resterende bestandssystemen..."

#: login-utils/shutdown.c:662
#, c-format
msgid "shutdown: Couldn't umount %s: %s\n"
msgstr "shutdown: Kan %s niet ontkoppelen: %s\n"

#: login-utils/simpleinit.c:132
msgid "Booting to single user mode.\n"
msgstr "Opstarten in ééngebruikersmodus.\n"

#: login-utils/simpleinit.c:136
msgid "exec of single user shell failed\n"
msgstr "Uitvoeren van ééngebruikersshell is mislukt\n"

#: login-utils/simpleinit.c:140
msgid "fork of single user shell failed\n"
msgstr "fork() van ééngebruikersshell is mislukt\n"

#: login-utils/simpleinit.c:208
msgid "error opening fifo\n"
msgstr "fout bij openen van fifo\n"

#: login-utils/simpleinit.c:212
msgid "error setting close-on-exec on /dev/initctl"
msgstr "fout bij instellen van sluiten-bij-uitvoeren op /dev/initctl"

#: login-utils/simpleinit.c:259
msgid "error running finalprog\n"
msgstr "fout bij uitvoeren van finalprog\n"

#: login-utils/simpleinit.c:263
msgid "error forking finalprog\n"
msgstr "fout bij fork() van finalprog\n"

#: login-utils/simpleinit.c:345
msgid ""
"\n"
"Wrong password.\n"
msgstr ""
"\n"
"Verkeerd wachtwoord.\n"

#: login-utils/simpleinit.c:418
msgid "lstat of path failed\n"
msgstr "lstat() van pad is mislukt\n"

#: login-utils/simpleinit.c:426
msgid "stat of path failed\n"
msgstr "stat() van pad is mislukt\n"

#: login-utils/simpleinit.c:434
msgid "open of directory failed\n"
msgstr "openen van map is mislukt\n"

#: login-utils/simpleinit.c:501
#, c-format
msgid "respawning: \"%s\" too fast: quenching entry\n"
msgstr "\"%s\" wordt te frequent herboren: item wordt afgeknepen\n"

#: login-utils/simpleinit.c:509
msgid "fork failed\n"
msgstr "fork() is mislukt\n"

#: login-utils/simpleinit.c:540 text-utils/more.c:1663
msgid "exec failed\n"
msgstr "exec() is mislukt\n"

#: login-utils/simpleinit.c:564
msgid "cannot open inittab\n"
msgstr "kan bestand 'inittab' niet openen\n"

#: login-utils/simpleinit.c:631
msgid "no TERM or cannot stat tty\n"
msgstr "geen TERM ingesteld, of kan status van terminal niet opvragen\n"

#: login-utils/simpleinit.c:938
#, c-format
msgid "error at stopping service \"%s\"\n"
msgstr "fout bij stoppen van dienst \"%s\"\n"

#: login-utils/simpleinit.c:950
#, c-format
msgid "Stopped service: %s\n"
msgstr "Gestopte dienst: \"%s\"\n"

#: login-utils/simpleinit.c:1070
#, c-format
msgid "error at starting service \"%s\"\n"
msgstr "fout bij starten van dienst \"%s\"\n"

#: login-utils/ttymsg.c:75
msgid "too many iov's (change code in wall/ttymsg.c)"
msgstr "**Interne fout**: te veel IOV's  [de code in wall/ttymsg.c dient veranderd]"

#: login-utils/ttymsg.c:85
#, c-format
msgid "excessively long line arg"
msgstr "excessief lang argument"

#: login-utils/ttymsg.c:140
#, c-format
msgid "cannot fork"
msgstr "kan geen nieuw proces starten"

#: login-utils/ttymsg.c:144
#, c-format
msgid "fork: %s"
msgstr "fork: %s"

#: login-utils/ttymsg.c:174
#, c-format
msgid "%s: BAD ERROR"
msgstr "%s: BEROERDE FOUTMELDING -- veel te lang"

#: login-utils/vipw.c:143
#, c-format
msgid "%s: the password file is busy.\n"
msgstr "%s: het bestand 'passwd' is in gebruik\n"

#: login-utils/vipw.c:146
#, c-format
msgid "%s: the group file is busy.\n"
msgstr "%s: het bestand 'group' is in gebruik\n"

#: login-utils/vipw.c:162
#, c-format
msgid "%s: the %s file is busy (%s present)\n"
msgstr "%s: het bestand %s is in gebruik (%s is aanwezig)\n"

#: login-utils/vipw.c:168
#, c-format
msgid "%s: can't link %s: %s\n"
msgstr "%s: kan %s niet koppelen: %s\n"

#: login-utils/vipw.c:202
#, c-format
msgid "%s: Can't get context for %s"
msgstr "%s: kan context van %s niet bepalen"

#: login-utils/vipw.c:208
#, c-format
msgid "%s: Can't set context for %s"
msgstr "%s: kan context voor %s niet instellen"

#: login-utils/vipw.c:217
#, c-format
msgid "%s: can't unlock %s: %s (your changes are still in %s)\n"
msgstr "%s: kan %s niet ontgrendelen: %s (uw wijzigingen staan nog in %s)\n"

#: login-utils/vipw.c:240
#, c-format
msgid "%s: Cannot fork\n"
msgstr "%s: Kan geen nieuw proces starten\n"

#: login-utils/vipw.c:276
#, c-format
msgid "%s: %s unchanged\n"
msgstr "%s: %s is ongewijzigd\n"

#: login-utils/vipw.c:297
#, c-format
msgid "%s: no changes made\n"
msgstr "%s: geen wijzigingen gemaakt\n"

#: login-utils/vipw.c:350
#, c-format
msgid "You are using shadow groups on this system.\n"
msgstr "U gebruikt schaduwgroepen op dit systeem.\n"

#: login-utils/vipw.c:351
#, c-format
msgid "You are using shadow passwords on this system.\n"
msgstr "U gebruikt schaduwwachtwoorden op dit systeem.\n"

#: login-utils/vipw.c:352
#, c-format
msgid "Would you like to edit %s now [y/n]? "
msgstr "Wilt u %s nu bewerken [y/n]? "

#: login-utils/wall.c:112
#, c-format
msgid "usage: %s [file]\n"
msgstr "Gebruik:  %s [bestand]\n"

#: login-utils/wall.c:167
#, c-format
msgid "%s: can't open temporary file.\n"
msgstr "%s: kan tijdelijk bestand niet openen\n"

#: login-utils/wall.c:194
#, c-format
msgid "Broadcast Message from %s@%s"
msgstr "Bericht van %s@%s"

#: login-utils/wall.c:212
#, c-format
msgid "%s: will not read %s - use stdin.\n"
msgstr "%s: zal %s niet direct lezen:  gebruik standaardinvoer\n"

#: login-utils/wall.c:217
#, c-format
msgid "%s: can't read %s.\n"
msgstr "%s: kan %s niet lezen\n"

#: login-utils/wall.c:240
#, c-format
msgid "%s: can't stat temporary file.\n"
msgstr "%s: kan tijdelijk bestand niet vinden\n"

#: login-utils/wall.c:250
#, c-format
msgid "%s: can't read temporary file.\n"
msgstr "%s: kan tijdelijk bestand niet lezen\n"

#: misc-utils/cal.c:365 misc-utils/cal.c:377
#, c-format
msgid "illegal day value: use 1-%d"
msgstr "onjuiste dagwaarde;  gebruik 1-%d"

#: misc-utils/cal.c:369
msgid "illegal month value: use 1-12"
msgstr "onjuiste maandwaarde;  gebruik 1-12"

#: misc-utils/cal.c:373
msgid "illegal year value: use 1-9999"
msgstr "onjuiste jaarwaarde;  gebruik 1-9999"

#: misc-utils/cal.c:467
#, c-format
msgid "%s %d"
msgstr "%s %d"

#: misc-utils/cal.c:786
#, c-format
msgid "usage: cal [-13smjyV] [[[day] month] year]\n"
msgstr "Gebruik:  cal [-13smjyV] [[[dag] maand] jaar]\n"

#: misc-utils/ddate.c:203
#, c-format
msgid "usage: %s [+format] [day month year]\n"
msgstr "Gebruik:  %s [+opmaak] [dag maand jaar]\n"

#: misc-utils/ddate.c:250
msgid "St. Tib's Day"
msgstr "Sint Tibs"

#: misc-utils/findfs.c:24
#, c-format
msgid "Usage: %s LABEL=<label>|UUID=<uuid>\n"
msgstr "Gebruik:  %s LABEL=<label>|UUID=<uuid>\n"

#: misc-utils/findfs.c:55
#, c-format
msgid "unable to resolve '%s'"
msgstr "kan '%s' niet herleiden"

#: misc-utils/findmnt.c:192
#, c-format
msgid "unknown column: %s"
msgstr "onbekende kolom: %s"

#: misc-utils/findmnt.c:308
msgid "failed to add line to output"
msgstr "toevoegen van regel aan uitvoer is mislukt"

#: misc-utils/findmnt.c:359
msgid "failed to initialize libmount tab"
msgstr "initialiseren van libmount-tabel is mislukt"

#: misc-utils/findmnt.c:364
#, c-format
msgid "can't read: %s"
msgstr "kan %s niet lezen"

#: misc-utils/findmnt.c:370
#, c-format
msgid "%s: parse error: %s"
msgstr "%s: ontledingsfout: %s"

#: misc-utils/findmnt.c:452
#, c-format
msgid ""
"\n"
"Usage:\n"
" %1$s [options]\n"
" %1$s [options] <device> | <mountpoint>\n"
" %1$s [options] <device> <mountpoint>\n"
" %1$s [options] [--source <device>] [--target <mountpoint>]\n"
msgstr ""
"\n"
"Gebruik:\n"
"  %1$s [opties]\n"
"  %1$s [opties] <apparaat> | <aankoppelingspunt>\n"
"  %1$s [opties] <apparaat> <aankoppelingspunt>\n"
"  %1$s [opties] [--source <apparaat>] [--target <aankoppelingspunt>]\n"

#: misc-utils/findmnt.c:460
#, c-format
msgid ""
"\n"
"Options:\n"
" -s, --fstab            search in static table of filesystems\n"
" -m, --mtab             search in table of mounted filesystems\n"
" -k, --kernel           search in kernel table of mounted \n"
"                        filesystems (default)\n"
"\n"
" -c, --canonicalize     canonicalize printed paths\n"
" -d, --direction <word> search direction - 'forward' or 'backward'\n"
" -e, --evaluate         print all TAGs (LABEL/UUID) evaluated\n"
" -f, --first-only       print the first found filesystem only\n"
" -h, --help             print this help\n"
" -i, --invert           invert sense of matching\n"
" -l, --list             use list format ouput\n"
" -n, --noheadings       don't print headings\n"
" -u, --notruncate       don't truncate text in columns\n"
" -O, --options <list>   limit the set of filesystems by mount options\n"
" -o, --output <list>    output columns\n"
" -r, --raw              use raw format output\n"
" -a, --ascii            use ascii chars for tree formatting\n"
" -t, --types <list>     limit the set of filesystem by FS types\n"
" -S, --source <string>  device, LABEL= or UUID=device\n"
" -T, --target <string>  mountpoint\n"
"\n"
msgstr ""

#: misc-utils/findmnt.c:483
#, c-format
msgid ""
"\n"
"For more information see findmnt(1).\n"
msgstr ""
"\n"
"Voor meer informatie zie findmnt(1).\n"

#: misc-utils/findmnt.c:491
msgid "options are mutually exclusive"
msgstr "opties gaan niet samen"

#: misc-utils/findmnt.c:564
#, c-format
msgid "unknown direction '%s'"
msgstr "onbekende richting '%s'"

#: misc-utils/findmnt.c:645
msgid "options --target and --source can't be used together with command line element that is not an option"
msgstr "opties '--target' en '--source' gaan niet samen met andere argumenten"

#: misc-utils/findmnt.c:679
msgid "failed to initialize libmount iterator"
msgstr "initialiseren van libmount-iterator is mislukt"

#: misc-utils/findmnt.c:685
msgid "failed to initialize libmount cache"
msgstr "initialiseren van libmount-cache is mislukt"

#: misc-utils/findmnt.c:695
msgid "failed to initialize output table"
msgstr "initialiseren van uitvoertabel is mislukt"

#: misc-utils/findmnt.c:707
msgid "failed to initialize output column"
msgstr "initialiseren van uitvoerkolom is mislukt"

#: misc-utils/kill.c:207
#, c-format
msgid "%s: unknown signal %s\n"
msgstr "%s: onbekend signaal %s\n"

#: misc-utils/kill.c:270
#, c-format
msgid "%s: can't find process \"%s\"\n"
msgstr "%s: kan proces '%s' niet vinden\n"

#: misc-utils/kill.c:314
#, c-format
msgid "%s: unknown signal %s; valid signals:\n"
msgstr "%s: onbekend signaal %s; geldige signalen zijn:\n"

#: misc-utils/kill.c:354
#, c-format
msgid "usage: %s [ -s signal | -p ] [ -a ] pid ...\n"
msgstr "Gebruik:  %s [ -s signaal | -p ] [ -a ] PID...\n"

#: misc-utils/kill.c:355
#, c-format
msgid "       %s -l [ signal ]\n"
msgstr "          %s -l [ signaal ]\n"

#: misc-utils/logger.c:67
#, c-format
msgid "logger: openlog: pathname too long\n"
msgstr "logger: openlog: padnaam is te lang\n"

#: misc-utils/logger.c:75
#, c-format
msgid "socket: %s.\n"
msgstr "socket: %s.\n"

#: misc-utils/logger.c:80
#, c-format
msgid "connect: %s.\n"
msgstr "verbinding: %s.\n"

#: misc-utils/logger.c:139
#, c-format
msgid "logger: %s: %s.\n"
msgstr "logger: %s: %s.\n"

#: misc-utils/logger.c:246
#, c-format
msgid "logger: unknown facility name: %s.\n"
msgstr "logger: onbekende voorzieningsnaam in prioriteit: %s\n"

#: misc-utils/logger.c:258
#, c-format
msgid "logger: unknown priority name: %s.\n"
msgstr "logger: onbekende prioriteitsnaam: %s\n"

#: misc-utils/logger.c:285
#, c-format
msgid "usage: logger [-is] [-f file] [-p pri] [-t tag] [-u socket] [ message ... ]\n"
msgstr ""
"Gebruik:  logger [-isd] [-f bestand] [-p prioriteit] [-t tag]\n"
"                 [-u socket] [bericht...]\n"

#: misc-utils/look.c:351
#, c-format
msgid "usage: look [-dfa] [-t char] string [file]\n"
msgstr "Gebruik:  look [-dfa] [-t teken] tekst [bestand]\n"

#: misc-utils/mcookie.c:105 misc-utils/mcookie.c:132
#, c-format
msgid "Could not open %s\n"
msgstr "Kan %s niet openen\n"

#: misc-utils/mcookie.c:109 misc-utils/mcookie.c:128
#, c-format
msgid "Got %d bytes from %s\n"
msgstr "%d bytes ontvangen van %s\n"

#: misc-utils/namei.c:143 misc-utils/namei.c:198 misc-utils/namei.c:225
#: misc-utils/namei.c:245 misc-utils/namei.c:252 misc-utils/namei.c:294
msgid "out of memory?"
msgstr "onvoldoende geheugen beschikbaar?"

#: misc-utils/namei.c:188
#, c-format
msgid "failed to read symlink: %s"
msgstr "lezen van symlink %s is mislukt"

#: misc-utils/namei.c:231 misc-utils/namei.c:254
#, c-format
msgid "could not stat '%s'"
msgstr "kan status van '%s' niet opvragen"

#: misc-utils/namei.c:449
#, c-format
msgid ""
"\n"
"Usage: %s [options] pathname [pathname ...]\n"
msgstr ""
"\n"
"Gebruik:  %s [opties] padnaam [padnaam...]\n"

#: misc-utils/namei.c:450
#, c-format
msgid ""
"\n"
"Options:\n"
msgstr ""
"\n"
"Opties:\n"

#: misc-utils/namei.c:453
#, c-format
msgid ""
" -h, --help          displays this help text\n"
" -x, --mountpoints   show mount point directories with a 'D'\n"
" -m, --modes         show the mode bits of each file\n"
" -o, --owners        show owner and group name of each file\n"
" -l, --long          use a long listing format (-m -o -v) \n"
" -n, --nosymlinks    don't follow symlinks\n"
" -v, --vertical      vertical align of modes and owners\n"
msgstr ""
"  -h, --help           deze hulptekst tonen\n"
"  -l, --long           uitgebreide extra informatie tonen ('-m -o -v')\n"
"  -m, --modes          de modus van elk bestand tonen\n"
"  -o, --owners         namen van eigenaar en groep van elk bestand tonen\n"
"  -v, --vertical       bestandsmodus en eigenaarnamen verticaal uitlijnen\n"
"  -n, --nosymlinks     symbolische koppelingen niet volgen\n"
"  -x, --mountpoints    aankoppelingspunten markeren met een 'D'\n"

#: misc-utils/namei.c:461
#, c-format
msgid ""
"\n"
"For more information see namei(1).\n"
msgstr ""
"\n"
"Voor meer informatie zie namei(1).\n"

#: misc-utils/namei.c:522
#, c-format
msgid "failed to stat: %s"
msgstr "kan status van %s niet bepalen"

#: misc-utils/namei.c:533
#, c-format
msgid "%s: exceeded limit of symlinks"
msgstr "%s: limiet op aantal symbolische koppelingen is overschreden"

#: misc-utils/rename.c:38
#, c-format
msgid "%s: out of memory\n"
msgstr "%s: onvoldoende geheugen beschikbaar\n"

#: misc-utils/rename.c:56
#, c-format
msgid "%s: renaming %s to %s failed: %s\n"
msgstr "%s: hernoemen van %s tot %s is mislukt: %s\n"

#: misc-utils/rename.c:86
#, c-format
msgid "call: %s from to files...\n"
msgstr "Gebruik:  %s van naar bestanden...\n"

#: misc-utils/script.c:115
#, c-format
msgid ""
"Warning: `%s' is a link.\n"
"Use `%s [options] %s' if you really want to use it.\n"
"Script not started.\n"
msgstr ""
"Waarschuwing: '%s' is een symbolische koppeling;\n"
"gebruik '%s [opties] %s' als u deze echt wilt gebruiken.\n"
"Script is niet gestart.\n"

#: misc-utils/script.c:182
#, c-format
msgid "usage: script [-a] [-e] [-f] [-q] [-t] [file]\n"
msgstr "Gebruik:  script [-a] [-e] [-f] [-q] [-t] [bestand]\n"

#: misc-utils/script.c:205
#, c-format
msgid "Script started, file is %s\n"
msgstr "Script is gestart, het bestand heet '%s'.\n"

#: misc-utils/script.c:264
#, c-format
msgid "%s: write error %d: %s\n"
msgstr "%s: schrijffout %d: %s\n"

#: misc-utils/script.c:326
#, c-format
msgid "Script started on %s"
msgstr "Script is gestart op %s."

#: misc-utils/script.c:358
#, c-format
msgid "%s: write error: %s\n"
msgstr "%s: schrijffout: %s\n"

#: misc-utils/script.c:365
#, c-format
msgid "%s: cannot write script file, error: %s\n"
msgstr "%s: kan scriptbestand niet schrijven: %s\n"

#: misc-utils/script.c:443
#, c-format
msgid ""
"\n"
"Script done on %s"
msgstr ""
"\n"
"Script is beëindigd op %s."

#: misc-utils/script.c:452
#, c-format
msgid "Script done, file is %s\n"
msgstr "Script is beëindigd, het bestand heet '%s'.\n"

#: misc-utils/script.c:474
#, c-format
msgid "openpty failed\n"
msgstr "openpty() is mislukt\n"

#: misc-utils/script.c:510
#, c-format
msgid "Out of pty's\n"
msgstr "Onvoldoende PTY's\n"

#: misc-utils/scriptreplay.c:38
#, c-format
msgid "%s <timingfile> [<typescript> [<divisor>]]\n"
msgstr "%s <timingsbestand> [<scriptbestand> [<versnelling>]]\n"

#: misc-utils/scriptreplay.c:53
#, c-format
msgid "expected a number, but got '%s'"
msgstr "er werd een getal verwacht, maar '%s' werd gevonden"

#: misc-utils/scriptreplay.c:56 misc-utils/scriptreplay.c:60
#, c-format
msgid "divisor '%s'"
msgstr "versnelling is '%s'"

#: misc-utils/scriptreplay.c:104
msgid "write to stdout failed"
msgstr "schrijven naar standaarduitvoer is mislukt"

#: misc-utils/scriptreplay.c:110
#, c-format
msgid "unexpected end of file on %s"
msgstr "onverwacht einde van bestand op %s"

#: misc-utils/scriptreplay.c:112
#, c-format
msgid "failed to read typescript file %s"
msgstr "kan scriptbestand %s niet lezen"

#: misc-utils/scriptreplay.c:145
#, c-format
msgid "cannot open timing file %s"
msgstr "kan timingsbestand '%s' niet openen"

#: misc-utils/scriptreplay.c:148
#, c-format
msgid "cannot open typescript file %s"
msgstr "kan scriptbestand '%s' niet openen"

#: misc-utils/scriptreplay.c:164
#, c-format
msgid "failed to read timing file %s"
msgstr "kan timingsbestand %s niet lezen"

#: misc-utils/scriptreplay.c:166
#, c-format
msgid "timings file %s: %lu: unexpected format"
msgstr "timingsbestand %s: %lu: onverwachte opmaak"

#: misc-utils/setterm.c:759
#, c-format
msgid "%s: Argument error, usage\n"
msgstr "%s: Onbekend argument -- gebruik:\n"

#: misc-utils/setterm.c:762
#, c-format
msgid "  [ -term terminal_name ]\n"
msgstr "  [ -term terminalnaam ]\n"

#: misc-utils/setterm.c:763
#, c-format
msgid "  [ -reset ]\n"
msgstr "  [ -reset ]\n"

#: misc-utils/setterm.c:764
#, c-format
msgid "  [ -initialize ]\n"
msgstr "  [ -initialize ]\n"

#: misc-utils/setterm.c:765
#, c-format
msgid "  [ -cursor [on|off] ]\n"
msgstr "  [ -cursor [on|off] ]\n"

#: misc-utils/setterm.c:767
#, c-format
msgid "  [ -snow [on|off] ]\n"
msgstr "  [ -snow [on|off] ]\n"

#: misc-utils/setterm.c:768
#, c-format
msgid "  [ -softscroll [on|off] ]\n"
msgstr "  [ -softscroll [on|off] ]\n"

#: misc-utils/setterm.c:770
#, c-format
msgid "  [ -repeat [on|off] ]\n"
msgstr "  [ -repeat [on|off] ]\n"

#: misc-utils/setterm.c:771
#, c-format
msgid "  [ -appcursorkeys [on|off] ]\n"
msgstr "  [ -appcursorkeys [on|off] ]\n"

#: misc-utils/setterm.c:772
#, c-format
msgid "  [ -linewrap [on|off] ]\n"
msgstr "  [ -linewrap [on|off] ]\n"

#: misc-utils/setterm.c:773
#, c-format
msgid "  [ -default ]\n"
msgstr "  [ -default ]\n"

#: misc-utils/setterm.c:774
#, c-format
msgid "  [ -foreground black|blue|green|cyan"
msgstr "  [ -foreground black|blue|green|cyan"

#: misc-utils/setterm.c:775 misc-utils/setterm.c:777
#, c-format
msgid "|red|magenta|yellow|white|default ]\n"
msgstr "|red|magenta|yellow|white|default ]\n"

#: misc-utils/setterm.c:776
#, c-format
msgid "  [ -background black|blue|green|cyan"
msgstr "  [ -background black|blue|green|cyan"

#: misc-utils/setterm.c:778
#, c-format
msgid "  [ -ulcolor black|grey|blue|green|cyan"
msgstr "  [ -ulcolor black|grey|blue|green|cyan"

#: misc-utils/setterm.c:779 misc-utils/setterm.c:781 misc-utils/setterm.c:783
#: misc-utils/setterm.c:785
#, c-format
msgid "|red|magenta|yellow|white ]\n"
msgstr "|red|magenta|yellow|white ]\n"

#: misc-utils/setterm.c:780
#, c-format
msgid "  [ -ulcolor bright blue|green|cyan"
msgstr "  [ -ulcolor bright blue|green|cyan"

#: misc-utils/setterm.c:782
#, c-format
msgid "  [ -hbcolor black|grey|blue|green|cyan"
msgstr "  [ -hbcolor black|grey|blue|green|cyan"

#: misc-utils/setterm.c:784
#, c-format
msgid "  [ -hbcolor bright blue|green|cyan"
msgstr "  [ -hbcolor bright blue|green|cyan"

#: misc-utils/setterm.c:787
#, c-format
msgid "  [ -standout [ attr ] ]\n"
msgstr "  [ -standout [ attr ] ]\n"

#: misc-utils/setterm.c:789
#, c-format
msgid "  [ -inversescreen [on|off] ]\n"
msgstr "  [ -inversescreen [on|off] ]\n"

#: misc-utils/setterm.c:790
#, c-format
msgid "  [ -bold [on|off] ]\n"
msgstr "  [ -bold [on|off] ]\n"

#: misc-utils/setterm.c:791
#, c-format
msgid "  [ -half-bright [on|off] ]\n"
msgstr "  [ -half-bright [on|off] ]\n"

#: misc-utils/setterm.c:792
#, c-format
msgid "  [ -blink [on|off] ]\n"
msgstr "  [ -blink [on|off] ]\n"

#: misc-utils/setterm.c:793
#, c-format
msgid "  [ -reverse [on|off] ]\n"
msgstr "  [ -reverse [on|off] ]\n"

#: misc-utils/setterm.c:794
#, c-format
msgid "  [ -underline [on|off] ]\n"
msgstr "  [ -underline [on|off] ]\n"

#: misc-utils/setterm.c:795
#, c-format
msgid "  [ -store ]\n"
msgstr "  [ -store ]\n"

#: misc-utils/setterm.c:796
#, c-format
msgid "  [ -clear [all|rest] ]\n"
msgstr "  [ -clear [all|rest] ]\n"

#: misc-utils/setterm.c:797
#, c-format
msgid "  [ -tabs [ tab1 tab2 tab3 ... ] ]      (tabn = 1-160)\n"
msgstr "  [ -tabs [ tab1 tab2 tab3 ... ] ]   (tabn = 1-160)\n"

#: misc-utils/setterm.c:798
#, c-format
msgid "  [ -clrtabs [ tab1 tab2 tab3 ... ] ]   (tabn = 1-160)\n"
msgstr "  [ -clrtabs [ tab1 tab2 tab3 ... ] ]   (tabn = 1-160)\n"

#: misc-utils/setterm.c:799
#, c-format
msgid "  [ -regtabs [1-160] ]\n"
msgstr "  [ -regtabs [1-160] ]\n"

#: misc-utils/setterm.c:800
#, c-format
msgid "  [ -blank [0-60|force|poke] ]\n"
msgstr "  [ -blank [0-60|force|poke] ]\n"

#: misc-utils/setterm.c:801
#, c-format
msgid "  [ -dump   [1-NR_CONSOLES] ]\n"
msgstr "  [ -dump [1-AANTAL_CONSOLES] ]\n"

#: misc-utils/setterm.c:802
#, c-format
msgid "  [ -append [1-NR_CONSOLES] ]\n"
msgstr "  [ -append [1-AANTAL_CONSOLES] ]\n"

#: misc-utils/setterm.c:803
#, c-format
msgid "  [ -file dumpfilename ]\n"
msgstr "  [ -file dumpbestandsnaam ]\n"

#: misc-utils/setterm.c:804
#, c-format
msgid "  [ -msg [on|off] ]\n"
msgstr "  [ -msg [on|off] ]\n"

#: misc-utils/setterm.c:805
#, c-format
msgid "  [ -msglevel [0-8] ]\n"
msgstr "  [ -msglevel [0-8] ]\n"

#: misc-utils/setterm.c:806
#, c-format
msgid "  [ -powersave [on|vsync|hsync|powerdown|off] ]\n"
msgstr "  [ -powersave [on|vsync|hsync|powerdown|off] ]\n"

#: misc-utils/setterm.c:807
#, c-format
msgid "  [ -powerdown [0-60] ]\n"
msgstr "  [ -powerdown [0-60] ]\n"

#: misc-utils/setterm.c:808
#, c-format
msgid "  [ -blength [0-2000] ]\n"
msgstr "  [ -blength [0-2000] ]\n"

#: misc-utils/setterm.c:809
#, c-format
msgid "  [ -bfreq freqnumber ]\n"
msgstr "  [ -bfreq belfrequentie ]\n"

#: misc-utils/setterm.c:1061
#, c-format
msgid "cannot force blank\n"
msgstr "kan scherm niet op zwart zetten\n"

#: misc-utils/setterm.c:1065
#, c-format
msgid "cannot force unblank\n"
msgstr "kan scherm niet uit zwartstand halen\n"

#: misc-utils/setterm.c:1071
#, c-format
msgid "cannot get blank status\n"
msgstr "kan schermtoestand niet opvragen\n"

#: misc-utils/setterm.c:1083
#, c-format
msgid "cannot (un)set powersave mode\n"
msgstr "kan stroombesparingsmodus niet instellen\n"

#: misc-utils/setterm.c:1122 misc-utils/setterm.c:1130
#, c-format
msgid "klogctl error: %s\n"
msgstr "klogctl() is mislukt: %s\n"

#: misc-utils/setterm.c:1196
#, c-format
msgid "Error writing screendump\n"
msgstr "Fout bij schrijven van schermafdruk\n"

#: misc-utils/setterm.c:1203
#, c-format
msgid "Couldn't read %s\n"
msgstr "Kan %s niet lezen\n"

#: misc-utils/setterm.c:1257
#, c-format
msgid "%s: $TERM is not defined.\n"
msgstr "%s: $TERM is niet gedefinieerd.\n"

#: misc-utils/uuidd.c:46
#, c-format
msgid "Usage: %s [-d] [-p pidfile] [-s socketpath] [-T timeout]\n"
msgstr "Gebruik:  %s [-d] [-p PID-bestand] [-s socket-pad] [-T tijslimiet]\n"

#: misc-utils/uuidd.c:48
#, c-format
msgid "       %s [-r|t] [-n num] [-s socketpath]\n"
msgstr "          %s [-r|t] [-n nummer] [-s socket-pad]\n"

#: misc-utils/uuidd.c:50
#, c-format
msgid "       %s -k\n"
msgstr "          %s -k\n"

#: misc-utils/uuidd.c:152
msgid "bad arguments"
msgstr "ongeldige argumenten"

#: misc-utils/uuidd.c:159
msgid "socket"
msgstr "socket"

#: misc-utils/uuidd.c:170
msgid "connect"
msgstr "verbinden"

#: misc-utils/uuidd.c:189
msgid "write"
msgstr "schrijven"

#: misc-utils/uuidd.c:197
msgid "read count"
msgstr "gelezen aantal"

#: misc-utils/uuidd.c:203
msgid "bad response length"
msgstr "ongeldige antwoordlengte"

#: misc-utils/uuidd.c:244
#, c-format
msgid "Failed to open/create %s: %s\n"
msgstr "Openen/aanmaken van %s is mislukt: %s\n"

#: misc-utils/uuidd.c:261
#, c-format
msgid "Failed to lock %s: %s\n"
msgstr "Vergrendelen van %s is mislukt: %s\n"

#: misc-utils/uuidd.c:268
#, c-format
msgid "uuidd daemon already running at pid %s\n"
msgstr "uuidd-dienst draait al onder PID %s\n"

#: misc-utils/uuidd.c:276
#, c-format
msgid "Couldn't create unix stream socket: %s"
msgstr "Kan geen UNIX-stream-socket aanmaken: %s"

#: misc-utils/uuidd.c:305
#, c-format
msgid "Couldn't bind unix socket %s: %s\n"
msgstr "Kan UNIX-socket %s niet binden: %s\n"

#: misc-utils/uuidd.c:313
#, c-format
msgid "Couldn't listen on unix socket %s: %s\n"
msgstr "Kan niet luisteren op UNIX-socket %s: %s\n"

#: misc-utils/uuidd.c:351
#, c-format
msgid "Error reading from client, len = %d\n"
msgstr "Fout tijdens lezen van cliënt; lengte = %d\n"

#: misc-utils/uuidd.c:359
#, c-format
msgid "operation %d, incoming num = %d\n"
msgstr "bewerking %d, gegeven getal = %d\n"

#: misc-utils/uuidd.c:362
#, c-format
msgid "operation %d\n"
msgstr "bewerking %d\n"

#: misc-utils/uuidd.c:378
#, c-format
msgid "Generated time UUID: %s\n"
msgstr "Gegenereerde tijds-UUID: %s\n"

#: misc-utils/uuidd.c:388
#, c-format
msgid "Generated random UUID: %s\n"
msgstr "Gegenereerde willekeurige UUID: %s\n"

#: misc-utils/uuidd.c:397
#, c-format
msgid "Generated time UUID %s and %d following\n"
msgstr "Gegenereerde tijds-UUID: %s, en %d opvolgende\n"

#: misc-utils/uuidd.c:415
#, c-format
msgid "Generated %d UUIDs:\n"
msgstr "Gegenereerde %d UUID's:\n"

#: misc-utils/uuidd.c:427
#, c-format
msgid "Invalid operation %d\n"
msgstr "Ongeldige bewerking %d\n"

#: misc-utils/uuidd.c:468 misc-utils/uuidd.c:489
#, c-format
msgid "Bad number: %s\n"
msgstr "Ongeldig getal: %s\n"

#: misc-utils/uuidd.c:524 misc-utils/uuidd.c:551
#, c-format
msgid "Error calling uuidd daemon (%s): %s\n"
msgstr "Fout bij aanroepen van uuidd-dienst (%s): %s\n"

#: misc-utils/uuidd.c:534
#, c-format
msgid "%s and subsequent %d UUIDs\n"
msgstr "%s en opvolgende %d UUID's\n"

#: misc-utils/uuidd.c:536
#, c-format
msgid "List of UUIDs:\n"
msgstr "Lijst van UUID's:\n"

#: misc-utils/uuidd.c:557
#, c-format
msgid "Unexpected reply length from server %d\n"
msgstr "Onverwachte antwoordlengte (%d) van server\n"

#: misc-utils/uuidd.c:574
#, c-format
msgid "Couldn't kill uuidd running at pid %d: %s\n"
msgstr "Kan uuidd met PID %d niet elimineren: %s\n"

#: misc-utils/uuidd.c:580
#, c-format
msgid "Killed uuidd running at pid %d\n"
msgstr "uuidd met PID %d is geëlimineerd\n"

#: misc-utils/uuidgen.c:32
#, c-format
msgid "Usage: %s [-r] [-t]\n"
msgstr "Gebruik:  %s [-r] [-t]\n"

#: misc-utils/whereis.c:159
#, c-format
msgid "whereis [ -sbmu ] [ -SBM dir ... -f ] name...\n"
msgstr "Gebruik:  whereis [-bmsu] [-BMS map... -f] naam...\n"

#: misc-utils/wipefs.c:130 sys-utils/lscpu.c:576
msgid "calloc failed"
msgstr "calloc() is mislukt"

#: misc-utils/wipefs.c:152
msgid "strdup failed"
msgstr "strdup() is mislukt"

#: misc-utils/wipefs.c:202
#, c-format
msgid "error: %s: probing initialization failed"
msgstr "fout: %s: initialisatie van sondering is mislukt"

#: misc-utils/wipefs.c:213
#, c-format
msgid "WARNING: %s: appears to contain '%s' partition table"
msgstr "WAARSCHUWING: %s schijnt een '%s'-partitietabel te bevatten"

#: misc-utils/wipefs.c:259
#, c-format
msgid "no magic string found at offset 0x%jx -- ignored"
msgstr "geen magische tekenreeks gevonden op positie 0x%jx -- genegeerd"

#: misc-utils/wipefs.c:266
#, c-format
msgid "%s: failed to seek to offset 0x%jx"
msgstr "%s: 'seek' naar positie 0x%jx is mislukt"

#: misc-utils/wipefs.c:273
#, c-format
msgid "%s: write failed"
msgstr "%s: schrijven is mislukt"

#: misc-utils/wipefs.c:275
#, c-format
msgid "%zd bytes ["
msgstr "%zd bytes ["

#: misc-utils/wipefs.c:283
#, c-format
msgid "] erased at offset 0x%jx (%s)\n"
msgstr "] gewist vanaf positie 0x%jx (%s)\n"

#: misc-utils/wipefs.c:294 mount/swapon.c:196 mount/swapon.c:264
#: mount/swapon.c:409 mount/swapon.c:568 mount/swapon.c:770
#: sys-utils/fallocate.c:132 sys-utils/fsfreeze.c:102
#, c-format
msgid "%s: open failed"
msgstr "%s: openen is mislukt"

#: misc-utils/wipefs.c:329
#, c-format
msgid "invalid offset value '%s' specified"
msgstr "ongeldige plaatswaarde '%s' gegeven"

#: misc-utils/wipefs.c:341
#, c-format
msgid ""
" -a, --all           wipe all magic strings (BE CAREFUL!)\n"
" -h, --help          show this help text\n"
" -n, --no-act        do everything except the actual write() call\n"
" -o, --offset <num>  offset to erase, in bytes\n"
" -p, --parsable      print out in parsable instead of printable format\n"
msgstr ""
"  -a, --all           alle magische tekenreeksen wissen (WEET WAT U DOET!)\n"
"  -h, --help          deze hulptekst tonen\n"
"  -n, --no-act        doen alsof: alles behalve het feitelijke schrijven\n"
"  -o, --offset GETAL  startpositie voor wissen, in bytes\n"
"  -p, --parsable      herbruikbare i.p.v. leesbare uitvoer produceren\n"

#: misc-utils/wipefs.c:347
#, c-format
msgid ""
"\n"
"For more information see wipefs(8).\n"
msgstr ""
"\n"
"Voor meer informatie zie wipefs(8).\n"

#: misc-utils/wipefs.c:398
msgid "--offset and --all are mutually exclusive"
msgstr "opties '--offset' en '--all' gaan niet samen"

#: misc-utils/write.c:101
#, c-format
msgid "write: can't find your tty's name\n"
msgstr "write: kan de naam van uw tty niet vinden\n"

#: misc-utils/write.c:112
#, c-format
msgid "write: you have write permission turned off.\n"
msgstr "write: u hebt berichtentoegang uitgezet\n"

#: misc-utils/write.c:133
#, c-format
msgid "write: %s is not logged in on %s.\n"
msgstr "write: %s is niet ingelogd op %s\n"

#: misc-utils/write.c:141
#, c-format
msgid "write: %s has messages disabled on %s\n"
msgstr "write: %s hebt berichten uitgezet op %s\n"

#: misc-utils/write.c:148
#, c-format
msgid "usage: write user [tty]\n"
msgstr "Gebruik:  write gebruiker [tty]\n"

#: misc-utils/write.c:236
#, c-format
msgid "write: %s is not logged in\n"
msgstr "write: %s is niet ingelogd\n"

#: misc-utils/write.c:245
#, c-format
msgid "write: %s has messages disabled\n"
msgstr "write: %s heeft berichten uitgezet\n"

#: misc-utils/write.c:249
#, c-format
msgid "write: %s is logged in more than once; writing to %s\n"
msgstr "write: %s is meerdere keren ingelogd; er wordt geschreven naar %s\n"

#: misc-utils/write.c:317
#, c-format
msgid "Message from %s@%s (as %s) on %s at %s ..."
msgstr "Bericht van %s@%s (als %s) op %s om %s..."

#: misc-utils/write.c:320
#, c-format
msgid "Message from %s@%s on %s at %s ..."
msgstr "Bericht van %s@%s op %s om %s..."

#: mount/fstab.c:144
#, c-format
msgid "warning: error reading %s: %s"
msgstr "waarschuwing: fout bij lezen van %s: %s"

#: mount/fstab.c:172 mount/fstab.c:197
#, c-format
msgid "warning: can't open %s: %s"
msgstr "waarschuwing: kan %s niet openen: %s"

#: mount/fstab.c:177
#, c-format
msgid "mount: could not open %s - using %s instead\n"
msgstr "mount: kan %s niet openen -- %s wordt gebruikt\n"

#: mount/fstab.c:590
#, c-format
msgid "can't create lock file %s: %s (use -n flag to override)"
msgstr "kan vergrendelingsbestand %s niet aanmaken: %s  (gebruik optie '-n' om te forceren)"

#: mount/fstab.c:616
#, c-format
msgid "can't link lock file %s: %s (use -n flag to override)"
msgstr "kan vergrendelingsbestand %s niet koppelen: %s  (gebruik optie '-n' om te forceren)"

#: mount/fstab.c:632
#, c-format
msgid "can't open lock file %s: %s (use -n flag to override)"
msgstr "kan vergrendelingsbestand %s niet openen: %s  (gebruik optie '-n' om te forceren)"

#: mount/fstab.c:647
#, c-format
msgid "Can't lock lock file %s: %s\n"
msgstr "kan vergrendelingsbestand %s niet vergrendelen: %s\n"

#: mount/fstab.c:661
#, c-format
msgid "can't lock lock file %s: %s"
msgstr "kan vergrendelingsbestand %s niet vergrendelen: %s"

#: mount/fstab.c:663
msgid "timed out"
msgstr "duurde te lang"

#: mount/fstab.c:670
#, c-format
msgid ""
"Cannot create link %s\n"
"Perhaps there is a stale lock file?\n"
msgstr ""
"Kan koppeling %s niet maken.\n"
"Mogelijk is er nog een oud vergrendelingsbestand?\n"

#: mount/fstab.c:792 mount/fstab.c:847
#, c-format
msgid "cannot open %s (%s) - mtab not updated"
msgstr "kan %s niet openen (%s) -- mtab is niet bijgewerkt"

#: mount/fstab.c:856
#, c-format
msgid "error writing %s: %s"
msgstr "fout bij schrijven van %s: %s"

#: mount/fstab.c:874
#, c-format
msgid "error changing mode of %s: %s\n"
msgstr "fout bij wijzigen van modus van %s: %s\n"

#: mount/fstab.c:887
#, c-format
msgid "error changing owner of %s: %s\n"
msgstr "fout bij wijzigen van eigenaar van %s: %s\n"

#: mount/fstab.c:898
#, c-format
msgid "can't rename %s to %s: %s\n"
msgstr "kan %s niet hernoemen tot %s: %s\n"

#: mount/lomount.c:362
#, c-format
msgid "loop: can't set capacity on device %s: %s\n"
msgstr "loop: kan grootte van apparaat %s niet instellen: %s\n"

#: mount/lomount.c:386
#, c-format
msgid ", offset %<PRIu64>"
msgstr ", beginpunt %<PRIu64>"

#: mount/lomount.c:389
#, c-format
msgid ", sizelimit %<PRIu64>"
msgstr ", maximale grootte %<PRIu64>"

#: mount/lomount.c:397
#, c-format
msgid ", encryption %s (type %<PRIu32>)"
msgstr ", codering %s (soort %<PRIu32>)"

#: mount/lomount.c:410
#, c-format
msgid ", offset %d"
msgstr ", beginpunt %d"

#: mount/lomount.c:413
#, c-format
msgid ", encryption type %d\n"
msgstr ", coderingssoort %d\n"

#: mount/lomount.c:421
#, c-format
msgid "loop: can't get info on device %s: %s\n"
msgstr "loop: kan geen informatie verkrijgen over apparaat %s: %s\n"

#: mount/lomount.c:432
#, c-format
msgid "loop: can't open device %s: %s\n"
msgstr "loop: kan apparaat %s niet openen: %s\n"

#: mount/lomount.c:448 mount/lomount.c:480 mount/lomount.c:542
#: mount/lomount.c:587
#, c-format
msgid "%s: /dev directory does not exist."
msgstr "%s: map '/dev' bestaat niet."

#: mount/lomount.c:459 mount/lomount.c:600
#, c-format
msgid "%s: no permission to look at /dev/loop%s<N>"
msgstr "%s: geen toegangsrechten tot /dev/loop%s<N>"

#: mount/lomount.c:603
#, c-format
msgid "%s: could not find any free loop device"
msgstr "%s: kan geen vrij lus-apparaat vinden"

#: mount/lomount.c:606
#, c-format
msgid ""
"%s: Could not find any loop device. Maybe this kernel does not know\n"
"       about the loop device? (If so, recompile or `modprobe loop'.)"
msgstr ""
"%s: Kan geen lus-apparaat vinden.  Misschien kent deze kernel geen\n"
"        lus-apparaat?  (Dan moet u de kernel opnieuw compileren,\n"
"        of misschien een 'modprobe loop' doen?)"

#: mount/lomount.c:636
msgid "Out of memory while reading passphrase"
msgstr "Onvoldoende geheugen beschikbaar tijdens lezen van wachtwoord"

#: mount/lomount.c:679
#, c-format
msgid "warning: %s is already associated with %s\n"
msgstr "waarschuwing: %s is al gerelateerd aan %s\n"

#: mount/lomount.c:695
#, c-format
msgid "warning: %s: is write-protected, using read-only.\n"
msgstr "waarschuwing: %s is schrijfbeveiligd en wordt als alleen-lezen aangekoppeld.\n"

#: mount/lomount.c:731
#, c-format
msgid "Couldn't lock into memory, exiting.\n"
msgstr "Kan pagina's niet vastzetten in het geheugen -- gestopt\n"

#: mount/lomount.c:758
#, c-format
msgid "ioctl LOOP_SET_FD failed: %s\n"
msgstr "ioctl(LOOP_SET_FD) is mislukt: %s\n"

#: mount/lomount.c:815
#, c-format
msgid "set_loop(%s,%s,%llu,%llu): success\n"
msgstr "set_loop(%s,%s,%llu,%llu) is gelukt\n"

#: mount/lomount.c:836
#, c-format
msgid "del_loop(%s): success\n"
msgstr "lus-apparaat %s is uitgeschakeld\n"

#: mount/lomount.c:840
#, c-format
msgid "loop: can't delete device %s: %s\n"
msgstr "kan lus-apparaat %s niet uitschakelen: %s\n"

#: mount/lomount.c:851
#, c-format
msgid "This mount was compiled without loop support. Please recompile.\n"
msgstr ""
"Deze versie van 'mount' is gecompileerd zonder lus-ondersteuning.\n"
"Hercompilatie is nodig.\n"

#: mount/lomount.c:888
#, c-format
msgid ""
"\n"
"Usage:\n"
" %1$s loop_device                             give info\n"
" %1$s -a | --all                              list all used\n"
" %1$s -d | --detach <loopdev> [<loopdev> ...] delete\n"
" %1$s -f | --find                             find unused\n"
" %1$s -c | --set-capacity <loopdev>           resize\n"
" %1$s -j | --associated <file> [-o <num>]     list all associated with <file>\n"
" %1$s [ options ] {-f|--find|loopdev} <file>  setup\n"
msgstr ""
"\n"
"Gebruik:\n"
"  %1$s <lus-apparaat>                                  info tonen\n"
"  %1$s -a | --all                                      alle gebruikte tonen\n"
"  %1$s -d | --detach <lus-apparaat>...                 verwijderen\n"
"  %1$s -f | --find                                     een ongebruikte tonen\n"
"  %1$s -c | --set-capacity <loopdev>                   de grootte wijzigen\n"
"  %1$s -j | --associated <bestand> [-o <nummer>]       gerelateerden tonen\n"
"  %1$s [opties] {-f|--find|<lus-apparaat>} <bestand>   instellen\n"

#: mount/lomount.c:898
#, c-format
msgid ""
"\n"
"Options:\n"
" -e | --encryption <type> enable data encryption with specified <name/num>\n"
" -h | --help              this help\n"
" -o | --offset <num>      start at offset <num> into file\n"
"      --sizelimit <num>   loop limited to only <num> bytes of the file\n"
" -p | --pass-fd <num>     read passphrase from file descriptor <num>\n"
" -r | --read-only         setup read-only loop device\n"
"      --show              print device name (with -f <file>)\n"
" -v | --verbose           verbose mode\n"
"\n"
msgstr ""
"\n"
"Opties:\n"
"  -e | --encryption <soort>  deze soort encryptie inschakelen\n"
"  -h | --help                deze hulptekst tonen\n"
"  -o | --offset <getal>      op deze positie in het bestand beginnen\n"
"       --sizelimit <getal>   slechts dit aantal bytes van bestand gebruiken\n"
"  -p | --pass-fd <getal>     wachtwoordtekst uit deze bestandsdescriptor lezen\n"
"  -r | --read-only           een alleen-lezen lus-apparaat instellen\n"
"       --show                apparaatnaam tonen (bij '-f <bestand>')\n"
"  -v | --verbose             gedetailleerde uitvoer produceren\n"

#: mount/lomount.c:1019
#, c-format
msgid "%s: invalid offset '%s' specified"
msgstr "%s: ongeldige positie '%s' opgegeven"

#: mount/lomount.c:1023
#, c-format
msgid "%s: invalid sizelimit '%s' specified"
msgstr "%s: ongeldige groottegrens '%s' opgegeven"

#: mount/lomount.c:1038 mount/lomount.c:1078
#, c-format
msgid "Loop device is %s\n"
msgstr "Lus-apparaat is %s\n"

#: mount/lomount.c:1065
#, c-format
msgid "stolen loop=%s...trying again\n"
msgstr "afgepakt lus-apparaat=%s; ... nieuwe poging\n"

#: mount/lomount.c:1075
#, c-format
msgid "%s: %s: device is busy"
msgstr "%s: apparaat %s is bezig"

#: mount/lomount.c:1092
#, c-format
msgid "No loop support was available at compile time. Please recompile.\n"
msgstr "Bij het compileren was geen lus-ondersteuning beschikbaar.  Hercompilatie is nodig.\n"

#: mount/mount.c:289
#, c-format
msgid ""
"\n"
"mount: warning: /etc/mtab is not writable (e.g. read-only filesystem).\n"
"       It's possible that information reported by mount(8) is not\n"
"       up to date. For actual information about system mount points\n"
"       check the /proc/mounts file.\n"
"\n"
msgstr ""
"\n"
"mount: Waarschuwing: /etc/mtab is niet schrijfbaar (mogelijk wegens een\n"
"       alleen-lezen bestandssysteem).  Het kan dus zijn dat de informatie\n"
"       gerapporteerd door mount(8) niet correct is.  Zie voor actuele\n"
"       info over aankoppelingspunten het bestand '/proc/mounts'.\n"
"\n"

#: mount/mount.c:339
#, c-format
msgid "mount: improperly quoted option string '%s'"
msgstr "mount: onjuist aangehaalde tekenreeks '%s'"

#: mount/mount.c:372
#, c-format
msgid "mount: translated %s '%s' to '%s'\n"
msgstr "mount: argument van %s is vertaald van '%s' naar '%s'\n"

#: mount/mount.c:536
#, c-format
msgid "mount: according to mtab, %s is already mounted on %s"
msgstr "mount: volgens mtab is %s al aangekoppeld op %s"

#: mount/mount.c:541
#, c-format
msgid "mount: according to mtab, %s is mounted on %s"
msgstr "mount: volgens mtab is %s aangekoppeld op %s"

#: mount/mount.c:565
#, c-format
msgid "mount: can't open %s for writing: %s"
msgstr "mount: kan %s niet openen om te schrijven: %s"

#: mount/mount.c:582 mount/mount.c:1256
#, c-format
msgid "mount: error writing %s: %s"
msgstr "mount: fout bij schrijven van %s: %s"

#: mount/mount.c:590
#, c-format
msgid "mount: error changing mode of %s: %s"
msgstr "mount: fout bij wijzigen van modus van %s: %s"

#: mount/mount.c:683
#, c-format
msgid "mount: cannot set group id: %s"
msgstr "mount: kan groeps-ID niet instellen: %s"

#: mount/mount.c:686
#, c-format
msgid "mount: cannot set user id: %s"
msgstr "mount: kan gebruikers-ID niet instellen: %s"

#: mount/mount.c:729 mount/mount.c:1923
#, c-format
msgid "mount: cannot fork: %s"
msgstr "mount: kan geen nieuw proces starten: %s"

#: mount/mount.c:865
#, c-format
msgid "Trying %s\n"
msgstr "soort %s wordt geprobeerd\n"

#: mount/mount.c:893
#, c-format
msgid "mount: you didn't specify a filesystem type for %s\n"
msgstr "mount: U gaf geen bestandssysteemsoort aan voor %s;\n"

#: mount/mount.c:896
#, c-format
msgid "       I will try all types mentioned in %s or %s\n"
msgstr "       alle soorten genoemd in %s of %s worden geprobeerd\n"

#: mount/mount.c:899
#, c-format
msgid "       and it looks like this is swapspace\n"
msgstr "       het lijkt erop dat dit wisselgeheugen is\n"

#: mount/mount.c:901
#, c-format
msgid "       I will try type %s\n"
msgstr "       soort %s wordt geprobeerd\n"

#: mount/mount.c:926
#, c-format
msgid "%s looks like swapspace - not mounted"
msgstr "%s ziet er uit als wisselgeheugen -- niet aangekoppeld"

#: mount/mount.c:934
#, c-format
msgid ""
"mount: %s: more filesystems detected. This should not happen,\n"
"       use -t <type> to explicitly specify the filesystem type or\n"
"       use wipefs(8) to clean up the device.\n"
msgstr ""
"mount: %s: er zijn meerdere bestandssystemen gedetecteerd.\n"
"    Dit zou niet mogen gebeuren.  Gebruik '-t SOORT' om expliciet de\n"
"    bestandssysteemsoort aan te geven, of gebruik wipefs(8) om het\n"
"    apparaat op te schonen.\n"

#: mount/mount.c:1022
msgid "mount failed"
msgstr "aankoppelen is mislukt"

#: mount/mount.c:1024
#, c-format
msgid "mount: only root can mount %s on %s"
msgstr "mount: alleen root kan %s aankoppelen op %s"

#: mount/mount.c:1109
msgid "mount: loop device specified twice"
msgstr "mount: lus-apparaat is twee keer aangegeven"

#: mount/mount.c:1114
msgid "mount: type specified twice"
msgstr "mount: soort is twee keer aangegeven"

#: mount/mount.c:1142
#, c-format
msgid "mount: skipping the setup of a loop device\n"
msgstr "mount: instellen van lus-apparaat wordt overgeslagen\n"

#: mount/mount.c:1151
#, c-format
msgid "mount: invalid offset '%s' specified"
msgstr "mount: ongeldige positie '%s' opgegeven"

#: mount/mount.c:1155
#, c-format
msgid "mount: invalid sizelimit '%s' specified"
msgstr "mount: ongeldige groottegrens '%s' opgegeven"

#: mount/mount.c:1160
#, c-format
msgid "mount: according to mtab %s is already mounted on %s as loop"
msgstr "mount: volgens mtab is %s al als lus-apparaat aangekoppeld op %s"

#: mount/mount.c:1170
#, c-format
msgid "mount: going to use the loop device %s\n"
msgstr "mount: lus-apparaat %s zal worden gebruikt\n"

#: mount/mount.c:1179
#, c-format
msgid "mount: stolen loop=%s ...trying again\n"
msgstr "mount: lus-apparaat %s is door ander proces afgepakt; ... nieuwe poging\n"

#: mount/mount.c:1184
#, c-format
msgid "mount: stolen loop=%s"
msgstr "mount: lus-apparaat %s is door ander proces afgepakt"

#: mount/mount.c:1189
#, c-format
msgid "mount: failed setting up loop device\n"
msgstr "mount: instellen van lus-apparaat is mislukt\n"

#: mount/mount.c:1200
#, c-format
msgid "mount: setup loop device successfully\n"
msgstr "mount: lus-apparaat is succesvol ingesteld\n"

#: mount/mount.c:1234
#, c-format
msgid "mount: no %s found - creating it..\n"
msgstr "mount: geen %s gevonden -- wordt nu aangemaakt...\n"

#: mount/mount.c:1251
#, c-format
msgid "mount: can't open %s: %s"
msgstr "mount: kan %s niet openen: %s"

#: mount/mount.c:1272
msgid "mount: argument to -p or --pass-fd must be a number"
msgstr "mount: argument van '-p' of '--pass-fd' moet een getal zijn"

#: mount/mount.c:1285
#, c-format
msgid "mount: cannot open %s for setting speed"
msgstr "mount: kan %s niet openen om snelheid in te stellen"

#: mount/mount.c:1288
#, c-format
msgid "mount: cannot set speed: %s"
msgstr "mount: kan snelheid niet instellen: %s"

#: mount/mount.c:1379
#, c-format
msgid "mount: according to mtab, %s is already mounted on %s\n"
msgstr "mount: volgens mtab is %s al aangekoppeld op %s\n"

#: mount/mount.c:1435
#, c-format
msgid "mount: warning: %s seems to be mounted read-write.\n"
msgstr "mount: Waarschuwing: %s schijnt aangekoppeld als lezen-en-schrijven\n"

#: mount/mount.c:1447
#, c-format
msgid "mount: warning: %s seems to be mounted read-only.\n"
msgstr "mount: Waarschuwing: %s schijnt aangekoppeld als alleen-lezen\n"

#: mount/mount.c:1480
msgid "mount: I could not determine the filesystem type, and none was specified"
msgstr "mount: kan bestandssysteemsoort niet bepalen, en er is geen aangegeven"

#: mount/mount.c:1483
msgid "mount: you must specify the filesystem type"
msgstr "mount: u moet een bestandssysteemsoort aangeven"

#: mount/mount.c:1486
msgid "mount: mount failed"
msgstr "mount: aankoppelen is mislukt"

#: mount/mount.c:1492 mount/mount.c:1529
#, c-format
msgid "mount: mount point %s is not a directory"
msgstr "mount: aankoppelingspunt %s is geen map"

#: mount/mount.c:1494
msgid "mount: permission denied"
msgstr "mount: toegang geweigerd"

#: mount/mount.c:1496
msgid "mount: must be superuser to use mount"
msgstr "mount: u moet root zijn om aan te kunnen koppelen"

#: mount/mount.c:1500 mount/mount.c:1504
#, c-format
msgid "mount: %s is busy"
msgstr "mount: %s is bezig"

#: mount/mount.c:1506
msgid "mount: proc already mounted"
msgstr "mount: proc is al aangekoppeld"

#: mount/mount.c:1508
#, c-format
msgid "mount: %s already mounted or %s busy"
msgstr "mount: %s is al aangekoppeld of %s is bezig"

#: mount/mount.c:1514
#, c-format
msgid "mount: mount point %s does not exist"
msgstr "mount: aankoppelingspunt %s bestaat niet"

#: mount/mount.c:1516
#, c-format
msgid "mount: mount point %s is a symbolic link to nowhere"
msgstr "mount: aankoppelingspunt %s is een symbolische koppeling die nergens naar wijst"

#: mount/mount.c:1521
#, c-format
msgid "mount: special device %s does not exist"
msgstr "mount: apparaat %s bestaat niet"

#: mount/mount.c:1533
#, c-format
msgid ""
"mount: special device %s does not exist\n"
"       (a path prefix is not a directory)\n"
msgstr "mount: apparaat %s bestaat niet  (het pad bevat iets dat geen map is)\n"

#: mount/mount.c:1545
#, c-format
msgid "mount: %s not mounted already, or bad option"
msgstr "mount: %s is nog niet aangekoppeld, of een ongeldige optie"

#: mount/mount.c:1547
#, c-format
msgid ""
"mount: wrong fs type, bad option, bad superblock on %s,\n"
"       missing codepage or helper program, or other error"
msgstr ""
"mount: onjuiste bestandssysteemsoort, ongeldige optie, ontbrekende codepagina,\n"
"       ontbrekend hulpprogramma, slecht superblok op %s, of een andere fout"

#: mount/mount.c:1554
msgid ""
"       (for several filesystems (e.g. nfs, cifs) you might\n"
"       need a /sbin/mount.<type> helper program)"
msgstr ""
"       (voor sommige bestandssystemen (bijvoorbeeld nfs of cifs) kan\n"
"       een /sbin/mount.<type> hulpprogramma nodig zijn)"

#: mount/mount.c:1563
msgid ""
"       (could this be the IDE device where you in fact use\n"
"       ide-scsi so that sr0 or sda or so is needed?)"
msgstr ""
"       (is dit misschien een IDE-apparaat waar u in feite ide-scsi gebruikt,\n"
"       zodat sr0 of sda of iets dergelijks nodig is?)"

#: mount/mount.c:1568
msgid ""
"       (aren't you trying to mount an extended partition,\n"
"       instead of some logical partition inside?)"
msgstr ""
"       (probeert u misschien een uitgebreide partitie aan te koppelen,\n"
"       in plaats van een daarin opgenomen logische partitie?)"

#: mount/mount.c:1575
msgid ""
"       In some cases useful info is found in syslog - try\n"
"       dmesg | tail  or so\n"
msgstr ""
"       Soms staat er nuttige informatie in het systeemlog --\n"
"       probeer zoiets als:  dmesg | tail\n"

#: mount/mount.c:1581
msgid "mount table full"
msgstr "aankoppelingstabel is vol"

#: mount/mount.c:1583
#, c-format
msgid "mount: %s: can't read superblock"
msgstr "mount: %s: kan superblok niet lezen"

#: mount/mount.c:1589
#, c-format
msgid "mount: %s: unknown device"
msgstr "mount: %s: onbekend apparaat"

#: mount/mount.c:1594
#, c-format
msgid "mount: unknown filesystem type '%s'"
msgstr "mount: onbekende bestandssysteemsoort '%s'"

#: mount/mount.c:1606
#, c-format
msgid "mount: probably you meant %s"
msgstr "mount: waarschijnlijk bedoelde u %s"

#: mount/mount.c:1609
msgid "mount: maybe you meant 'iso9660'?"
msgstr "mount: mogelijk bedoelde u 'iso9660'?"

#: mount/mount.c:1612
msgid "mount: maybe you meant 'vfat'?"
msgstr "mount: mogelijk bedoelde u 'vfat'?"

#: mount/mount.c:1615
#, c-format
msgid "mount: %s has wrong device number or fs type %s not supported"
msgstr "mount: %s heeft onjuist apparaatnummer, of bestandssysteemsoort %s wordt niet ondersteund"

#: mount/mount.c:1623
#, c-format
msgid "mount: %s is not a block device, and stat fails?"
msgstr "mount: %s is geen blok-apparaat, en stat() is mislukt... heel vreemd"

#: mount/mount.c:1625
#, c-format
msgid ""
"mount: the kernel does not recognize %s as a block device\n"
"       (maybe `modprobe driver'?)"
msgstr ""
"mount: de kernel herkent %s niet als een blok-apparaat\n"
"       (misschien is 'modprobe stuurprogramma' nodig?)"

#: mount/mount.c:1628
#, c-format
msgid "mount: %s is not a block device (maybe try `-o loop'?)"
msgstr "mount: %s is geen blok-apparaat  (misschien '-o loop' proberen?)"

#: mount/mount.c:1631
#, c-format
msgid "mount: %s is not a block device"
msgstr "mount: %s is geen blok-apparaat"

#: mount/mount.c:1636
#, c-format
msgid "mount: %s is not a valid block device"
msgstr "mount: %s is geen geldig blok-apparaat"

#: mount/mount.c:1639
msgid "block device "
msgstr "blok-apparaat "

#: mount/mount.c:1641
#, c-format
msgid "mount: cannot mount %s%s read-only"
msgstr "mount: kan %s%s niet aankoppelen voor alleen-lezen"

#: mount/mount.c:1645
#, c-format
msgid "mount: %s%s is write-protected but explicit `-w' flag given"
msgstr "mount: %s%s is schrijfbeveiligd, maar expliciete optie '-w' is gegeven"

#: mount/mount.c:1649
#, c-format
msgid "mount: cannot remount %s%s read-write, is write-protected"
msgstr "mount: kan %s%s niet heraankoppelen als lezen-en-schrijven, want is schrijfbeveiligd"

#: mount/mount.c:1664
#, c-format
msgid "mount: %s%s is write-protected, mounting read-only"
msgstr "mount: %s%s is schrijfbeveiligd en wordt als alleen-lezen aangekoppeld"

#: mount/mount.c:1672
#, c-format
msgid "mount: no medium found on %s"
msgstr "mount: geen medium gevonden op %s"

#: mount/mount.c:1690
#, c-format
msgid ""
"mount: %s does not contain SELinux labels.\n"
"       You just mounted an file system that supports labels which does not\n"
"       contain labels, onto an SELinux box. It is likely that confined\n"
"       applications will generate AVC messages and not be allowed access to\n"
"       this file system.  For more details see restorecon(8) and mount(8).\n"
msgstr ""
"mount: %s bevat geen SELinux-labels.\n"
"    U hebt zojuist op een SELinux-computer een bestandssysteem aangekoppeld dat\n"
"    labels ondersteunt maar er geen bevat.  Waarschijnlijk zullen ingeperkte\n"
"    programma's AVC-berichten genereren en geen toegang tot dit bestandssysteem\n"
"    kunnen krijgen.  Voor meer details zie restorecon(8) en mount(8).\n"

#: mount/mount.c:1769
#, c-format
msgid "mount: no type was given - I'll assume nfs because of the colon\n"
msgstr "mount: geen soort gegeven -- NFS aangenomen, vanwege de dubbele punt\n"

#: mount/mount.c:1775
#, c-format
msgid "mount: no type was given - I'll assume cifs because of the // prefix\n"
msgstr "mount: geen soort gegeven -- CIFS aangenomen, vanwege het //-voorvoegsel\n"

#: mount/mount.c:1870
#, c-format
msgid "mount: %s already mounted on %s\n"
msgstr "mount: %s is al aangekoppeld op %s\n"

#: mount/mount.c:2005
#, c-format
msgid ""
"Usage: mount -V                 : print version\n"
"       mount -h                 : print this help\n"
"       mount                    : list mounted filesystems\n"
"       mount -l                 : idem, including volume labels\n"
"So far the informational part. Next the mounting.\n"
"The command is `mount [-t fstype] something somewhere'.\n"
"Details found in /etc/fstab may be omitted.\n"
"       mount -a [-t|-O] ...     : mount all stuff from /etc/fstab\n"
"       mount device             : mount device at the known place\n"
"       mount directory          : mount known device here\n"
"       mount -t type dev dir    : ordinary mount command\n"
"Note that one does not really mount a device, one mounts\n"
"a filesystem (of the given type) found on the device.\n"
"One can also mount an already visible directory tree elsewhere:\n"
"       mount --bind olddir newdir\n"
"or move a subtree:\n"
"       mount --move olddir newdir\n"
"One can change the type of mount containing the directory dir:\n"
"       mount --make-shared dir\n"
"       mount --make-slave dir\n"
"       mount --make-private dir\n"
"       mount --make-unbindable dir\n"
"One can change the type of all the mounts in a mount subtree\n"
"containing the directory dir:\n"
"       mount --make-rshared dir\n"
"       mount --make-rslave dir\n"
"       mount --make-rprivate dir\n"
"       mount --make-runbindable dir\n"
"A device can be given by name, say /dev/hda1 or /dev/cdrom,\n"
"or by label, using  -L label  or by uuid, using  -U uuid .\n"
"Other options: [-nfFrsvw] [-o options] [-p passwdfd].\n"
"For many more details, say  man 8 mount .\n"
msgstr ""
"Gebruik:  mount                 : aangekoppelde bestandssystemen tonen\n"
"          mount -l              : idem, inclusief volumenlabels\n"
"          mount -h              : deze hulptekst tonen\n"
"          mount -V              : programmaversie tonen\n"
"\n"
"Tot zover het deel dat informatie weergeeft.  Nu het aankoppelen.\n"
"De algemene vorm is:  'mount [-t bestandssysteemsoort] iets ergens'.\n"
"Details die in /etc/fstab staan kunnen worden weggelaten.\n"
"          mount -a [-t|-O]      : alles in /etc/fstab aankoppelen\n"
"          mount apparaat        : apparaat aankoppelen op de bekende plaats\n"
"          mount map             : bekend apparaat hier aankoppelen\n"
"          mount -t soort apparaat map : volledige mount-opdracht\n"
"Merk op dat men niet echt een apparaat aankoppelt, maar het bestandssysteem\n"
"(van de gegeven soort) dat zich op dat apparaat bevindt.\n"
"\n"
"Men kan ook een reeds zichtbare mappenboom ergens anders aankoppelen:\n"
"          mount --bind oudemap nieuwemap\n"
"of een subboom verplaatsen:\n"
"          mount --move oudemap nieuwemap\n"
"Men kan van een aankoppeling de soort veranderen, als 'map' erin voorkomt:\n"
"       mount --make-shared map\n"
"       mount --make-slave map\n"
"       mount --make-private map\n"
"       mount --make-unbindable map\n"
"Men kan van alle aankoppelingen in een subboom de soort veranderen,\n"
"als 'map' erin voorkomt:\n"
"       mount --make-rshared map\n"
"       mount --make-rslave map\n"
"       mount --make-rprivate map\n"
"       mount --make-runbindable map\n"
"\n"
"Een apparaat kan worden opgegeven via de naam, zeg /dev/hda1 of /dev/cdrom,\n"
"of via het label, met -L label, of via de UUID, met -U UUID.\n"
"Andere opties zijn: [-nfFrsvw] [-o opties] [-p wachtwoordbestandsdescriptor].\n"
"Voor meer informatie, zie man mount(8).\n"

#: mount/mount.c:2333
#, c-format
msgid "mount: only root can do that (effective UID is %u)"
msgstr "mount: alleen root kan dat doen (feitelijke UID is %u)"

#: mount/mount.c:2336
msgid "mount: only root can do that"
msgstr "mount: alleen root kan dat doen"

#: mount/mount.c:2347
msgid "nothing was mounted"
msgstr "er werd niets aangekoppeld"

#: mount/mount.c:2365 mount/mount.c:2391
msgid "mount: no such partition found"
msgstr "mount: die partitie is niet gevonden"

#: mount/mount.c:2368
#, c-format
msgid "mount: can't find %s in %s or %s"
msgstr "mount: kan %s niet vinden in %s noch in %s"

#: mount/mount_mntent.c:114
#, c-format
msgid "[mntent]: warning: no final newline at the end of %s\n"
msgstr "[mntent]: waarschuwing: geen afsluitend regeleindeteken aan het eind van %s\n"

#: mount/mount_mntent.c:165
#, c-format
msgid "[mntent]: line %d in %s is bad%s\n"
msgstr "[mntent]: regel %d in %s is ongeldig%s\n"

#: mount/mount_mntent.c:168
msgid "; rest of file ignored"
msgstr "; rest van bestand is genegeerd"

#: mount/sundries.c:32
msgid "bug in xstrndup call"
msgstr "*programmeerfout* in aanroep van xstrndup()"

#: mount/sundries.c:225 mount/sundries.c:281 mount/sundries.c:296
#: mount/xmalloc.c:11
msgid "not enough memory"
msgstr "onvoldoende geheugen beschikbaar"

#: mount/swapon.c:85
#, c-format
msgid ""
"The <special> parameter:\n"
" {-L label | LABEL=label}             LABEL of device to be used\n"
" {-U uuid  | UUID=uuid}               UUID of device to be used\n"
" <device>                             name of device to be used\n"
" <file>                               name of file to be used\n"
"\n"
msgstr ""
"De parameter NAAM kan zijn:\n"
"  {-L label | LABEL=label}    label van te gebruiken apparaat\n"
"  {-U UUID  | UUID=UUID}      UUID van te gebruiken apparaat\n"
"  <apparaat>                  naam van te gebruiken apparaat\n"
"  <bestand>                   naam van te gebruiken bestand\n"
"\n"

#: mount/swapon.c:93
#, c-format
msgid ""
"\n"
"Usage:\n"
" %1$s -a [-e] [-v] [-f]             enable all swaps from /etc/fstab\n"
" %1$s [-p priority] [-v] [-f] <special>  enable given swap\n"
" %1$s -s                            display swap usage summary\n"
" %1$s -h                            display help\n"
" %1$s -V                            display version\n"
"\n"
msgstr ""
"\n"
"Gebruik:\n"
"  %1$s -a [-e] [-v] [-f]                 alle wisselgeheugens inschakelen die\n"
"                                           vermeld staan in /etc/fstab\n"
"  %1$s [-p PRIORITEIT] [-v] [-f] NAAM    dit wisselgeheugen inschakelen\n"
"  %1$s -s                                gebruikssamenvatting tonen\n"
"  %1$s -h                                deze hulptekst tonen\n"
"  %1$s -V                                programmaversie tonen\n"
"\n"

#: mount/swapon.c:107
#, c-format
msgid ""
"\n"
"Usage:\n"
" %1$s -a [-v]                      disable all swaps\n"
" %1$s [-v] <special>               disable given swap\n"
" %1$s -h                           display help\n"
" %1$s -V                           display version\n"
"\n"
msgstr ""
"\n"
"Gebruik:\n"
"  %1$s -a [-v]      alle wisselgeheugens uitschakelen\n"
"  %1$s [-v] NAAM    dit wisselgeheugen uitschakelen\n"
"  %1$s -h           deze hulptekst tonen\n"
"  %1$s -V           programmaversie tonen\n"
"\n"

#: mount/swapon.c:142
#, c-format
msgid "%s: unexpected file format"
msgstr "%s: Onverwachte bestandsindeling"

#: mount/swapon.c:217
#, c-format
msgid "%s: reinitializing the swap."
msgstr "%s: herinitialisatie van het wisselgeheugen"

#: mount/swapon.c:221
msgid "fork failed"
msgstr "fork() is mislukt"

#: mount/swapon.c:237
msgid "execv failed"
msgstr "execv() is mislukt"

#: mount/swapon.c:245
msgid "waitpid failed"
msgstr "waitpid() is mislukt"

#: mount/swapon.c:269
#, c-format
msgid "%s: lseek failed"
msgstr "%s: 'lseek' is mislukt"

#: mount/swapon.c:275
#, c-format
msgid "%s: write signature failed"
msgstr "%s: schrijven van vingerafdruk is mislukt"

#: mount/swapon.c:362
#, c-format
msgid "%s: found swap signature: version %d, page-size %d, %s byte order"
msgstr "%s: wisselgeheugenvingerafdruk gevonden: versie %d, paginagrootte %d, %s byte-volgorde"

# Eén van de volgende twee berichten wordt ingevuld voor bovenstaand woord "byte-volgorde".
#: mount/swapon.c:367
msgid "different"
msgstr "verschillende"

#: mount/swapon.c:367
msgid "same"
msgstr "zelfde"

#: mount/swapon.c:382
#, c-format
msgid "%s: stat failed"
msgstr "%s: stat() is mislukt"

#: mount/swapon.c:392
#, c-format
msgid "%s: insecure permissions %04o, %04o suggested."
msgstr "%s: onveilige toegangsrechten: %04o -- aangeraden wordt: %04o"

#: mount/swapon.c:400
#, c-format
msgid "%s: skipping - it appears to have holes."
msgstr "%s: wordt overgeslagen -- het lijkt gaten te hebben."

#: mount/swapon.c:414
#, c-format
msgid "%s: get size failed"
msgstr "%s: bepalen van grootte is mislukt"

#: mount/swapon.c:420
#, c-format
msgid "%s: read swap header failed"
msgstr "%s: lezen van kop van wisselgeheugen is mislukt"

#: mount/swapon.c:428
#, c-format
msgid "%s: pagesize=%d, swapsize=%llu, devsize=%llu"
msgstr "%s: paginagrootte=%d, wisselgrootte=%llu, apparaatgrootte=%llu"

#: mount/swapon.c:433
#, c-format
msgid "%s: last_page 0x%08llx is larger than actual size of swapspace"
msgstr "%s: opgeslagen grootte (0x%08llx) van wisselgeheugen is groter dan de feitelijke ruimte"

#: mount/swapon.c:438
#, c-format
msgid "%s: swap format pagesize does not match."
msgstr "%s: opgeslagen paginagrootte klopt niet"

#: mount/swapon.c:443
#, c-format
msgid "%s: swap format pagesize does not match. (Use --fixpgsz to reinitialize it.)"
msgstr ""
"%s: opgeslagen paginagrootte klopt niet;\n"
"gebruik '--fixpgsz' om dit te corrigeren"

#: mount/swapon.c:452
#, c-format
msgid "%s: software suspend data detected. Rewriting the swap signature."
msgstr "%s: slaapgegevens gevonden -- vingerafdruk wordt opnieuw geschreven"

#: mount/swapon.c:476 mount/swapon.c:526
#, c-format
msgid "%s on %s\n"
msgstr "%s op %s\n"

#: mount/swapon.c:498
#, c-format
msgid "%s: swapon failed"
msgstr "%s: swapon is mislukt"

#: mount/swapon.c:505
#, c-format
msgid "cannot find the device for %s"
msgstr "kan geen apparaat vinden voor %s"

#: mount/swapon.c:538
msgid "Not superuser."
msgstr "U bent niet root."

#: mount/swapon.c:541
#, c-format
msgid "%s: swapoff failed"
msgstr "%s: swapoff is mislukt"

#: mount/swapon.c:809
#, c-format
msgid "'%s' is unsupported program name (must be 'swapon' or 'swapoff')."
msgstr "'%s' is niet-toegestane programmanaam (moet 'swapon' of 'swapoff' zijn)"

#: mount/umount.c:41
#, c-format
msgid "umount: compiled without support for -f\n"
msgstr "umount: gecompileerd zonder ondersteuning voor '-f'\n"

#: mount/umount.c:114
#, c-format
msgid "umount: cannot set group id: %s"
msgstr "umount: kan groeps-ID niet instellen: %s"

#: mount/umount.c:117
#, c-format
msgid "umount: cannot set user id: %s"
msgstr "umount: kan gebruikers-ID niet instellen: %s"

#: mount/umount.c:142
#, c-format
msgid "umount: cannot fork: %s"
msgstr "umount: kan geen nieuw proces starten: %s"

#: mount/umount.c:163
#, c-format
msgid "umount: %s: invalid block device"
msgstr "umount: %s: ongeldig blok-apparaat"

#: mount/umount.c:165
#, c-format
msgid "umount: %s: not mounted"
msgstr "umount: %s: niet aangekoppeld"

#: mount/umount.c:167
#, c-format
msgid "umount: %s: can't write superblock"
msgstr "umount: %s: kan niet naar superblok schrijven"

#: mount/umount.c:171
#, c-format
msgid ""
"umount: %s: device is busy.\n"
"        (In some cases useful info about processes that use\n"
"         the device is found by lsof(8) or fuser(1))"
msgstr ""
"umount: %s: apparaat is bezig\n"
"        (Welke processen het apparaat gebruiken kan mogelijk\n"
"         gevonden worden met behulp van lsof(8) of fuser(1).)"

#: mount/umount.c:176
#, c-format
msgid "umount: %s: not found"
msgstr "umount: %s: niet gevonden"

#: mount/umount.c:178
#, c-format
msgid "umount: %s: must be superuser to umount"
msgstr "umount: %s: u moet root zijn om te kunnen ontkoppelen"

#: mount/umount.c:180
#, c-format
msgid "umount: %s: block devices not permitted on fs"
msgstr "umount: %s: blok-apparaten niet toegestaan op bestandssysteem"

#: mount/umount.c:182
#, c-format
msgid "umount: %s: %s"
msgstr "umount: %s: %s"

#: mount/umount.c:241
#, c-format
msgid "no umount2, trying umount...\n"
msgstr "geen umount2 aanwezig; poging met gewone umount...\n"

#: mount/umount.c:258
#, c-format
msgid "umount: %s busy - remounted read-only\n"
msgstr "umount: %s is bezig -- als alleen-lezen heraangekoppeld\n"

#: mount/umount.c:269
#, c-format
msgid "umount: could not remount %s read-only\n"
msgstr "umount: kan %s niet als alleen-lezen heraankoppelen\n"

#: mount/umount.c:278
#, c-format
msgid "%s has been unmounted\n"
msgstr "%s werd ontkoppeld\n"

#: mount/umount.c:373
msgid "umount: cannot find list of filesystems to unmount"
msgstr "umount: kan geen lijst vinden met bestandssystemen om te ontkoppelen"

#: mount/umount.c:405
#, c-format
msgid ""
"Usage: umount -h | -V\n"
"       umount -a [-d] [-f] [-r] [-n] [-v] [-t vfstypes] [-O opts]\n"
"       umount [-d] [-f] [-r] [-n] [-v] special | node...\n"
msgstr ""
"Gebruik:  umount [-dfnrv] map|apparaat...\n"
"          umount -a [-dfnrv] [-t bestandssysteemsoorten] [-O opties]\n"
"          umount -h|-V\n"

#: mount/umount.c:474
#, c-format
msgid "device %s is associated with %s\n"
msgstr "apparaat %s is gerelateerd aan %s\n"

#: mount/umount.c:480
#, c-format
msgid "device %s is not associated with %s\n"
msgstr "apparaat %s is niet gerelateerd aan %s\n"

#: mount/umount.c:493
msgid "Cannot unmount \"\"\n"
msgstr "Kan niet \"\" ontkoppelen\n"

#: mount/umount.c:499
#, c-format
msgid "Trying to unmount %s\n"
msgstr "Poging tot ontkoppelen van %s...\n"

#: mount/umount.c:512
msgid "umount: confused when analyzing mtab"
msgstr "umount: verward tijdens analyse van 'mtab'-bestand"

#: mount/umount.c:517
#, c-format
msgid "umount: cannot unmount %s -- %s is mounted over it on the same point"
msgstr "umount: kan %s niet ontkoppelen -- %s is er op hetzelfde punt overheen aangekoppeld"

#: mount/umount.c:524
#, c-format
msgid "Could not find %s in mtab\n"
msgstr "Kan %s niet vinden in mtab\n"

#: mount/umount.c:531
#, c-format
msgid "umount: %s is not mounted (according to mtab)"
msgstr "umount: %s is niet aangekoppeld (volgens mtab)"

#: mount/umount.c:555
#, c-format
msgid "umount: it seems %s is mounted multiple times"
msgstr "umount: het lijkt erop dat %s meerdere keren is aangekoppeld"

#: mount/umount.c:569
#, c-format
msgid "umount: %s is not in the fstab (and you are not root)"
msgstr "umount: %s staat niet in fstab (en u bent niet root)"

#: mount/umount.c:575
#, c-format
msgid "umount: %s mount disagrees with the fstab"
msgstr "umount: aankoppeling op %s komt niet overeen met fstab"

#: mount/umount.c:616
#, c-format
msgid "umount: only %s can unmount %s from %s"
msgstr "umount: alleen %s kan %s ontkoppelen van %s"

#: mount/umount.c:711
msgid "umount: only root can do that"
msgstr "umount: alleen root kan dat doen"

#: schedutils/chrt.c:60
#, c-format
msgid ""
"\n"
"chrt - manipulate real-time attributes of a process\n"
"\n"
"Set policy:\n"
"  chrt [options] <policy> <priority> {<pid> | <command> [<arg> ...]}\n"
"\n"
"Get policy:\n"
"  chrt [options] {<pid> | <command> [<arg> ...]}\n"
msgstr ""
"\n"
"chrt - de realtime-eigenschappen van een proces instellen\n"
"\n"
"Beleid instellen:\n"
"  chrt [opties] <beleid> <prioriteit> {<PID> | <opdracht> [<argument>...]}\n"
"\n"
"Beleid opvragen:\n"
"  chrt [opties] {<PID> | <opdracht> [<argument>...]}\n"

#: schedutils/chrt.c:67
#, c-format
msgid ""
"\n"
"Scheduling policies:\n"
"  -b | --batch         set policy to SCHED_BATCH\n"
"  -f | --fifo          set policy to SCHED_FIFO\n"
"  -i | --idle          set policy to SCHED_IDLE\n"
"  -o | --other         set policy to SCHED_OTHER\n"
"  -r | --rr            set policy to SCHED_RR (default)\n"
msgstr ""
"\n"
"Scheduling-beleid:\n"
"  -b | --batch          beleid op SCHED_BATCH instellen\n"
"  -f | --fifo           beleid op SCHED_FIFO instellen\n"
"  -i | --idle           beleid op SCHED_IDLE instellen\n"
"  -o | --other          beleid op SCHED_OTHER instellen\n"
"  -r | --rr             beleid op SCHED_RR instellen (standaard)\n"

#: schedutils/chrt.c:76
#, c-format
msgid ""
"\n"
"Scheduling flags:\n"
"  -R | --reset-on-fork set SCHED_RESET_ON_FORK for FIFO or RR\n"
msgstr ""
"\n"
"Scheduling-vlag:\n"
"  -R | --reset-on-fork  SCHED_RESET_ON_FORK instellen voor FIFO of RR\n"

#: schedutils/chrt.c:80
#, c-format
msgid ""
"\n"
"Options:\n"
"  -h | --help          display this help\n"
"  -m | --max           show min and max valid priorities\n"
"  -p | --pid           operate on existing given pid\n"
"  -v | --verbose       display status information\n"
"  -V | --version       output version information\n"
"\n"
msgstr ""
"\n"
"Opties:\n"
"  -h | --help           deze hulptekst tonen\n"
"  -m | --max            minimum en maximum geldige prioriteiten tonen\n"
"  -p | --pid            de gegeven bestaande PID beïnvloeden\n"
"  -v | --verbose        statusinformatie tonen\n"
"  -V | --version        programmaversie tonen\n"
"\n"

#: schedutils/chrt.c:101
#, c-format
msgid "failed to get pid %d's policy"
msgstr "opvragen van beleid voor PID %d is mislukt"

#: schedutils/chrt.c:104
#, c-format
msgid "pid %d's new scheduling policy: "
msgstr "Nieuw scheduling-beleid voor PID %d: "

#: schedutils/chrt.c:106
#, c-format
msgid "pid %d's current scheduling policy: "
msgstr "Huidig scheduling-beleid voor PID %d: "

#: schedutils/chrt.c:139
#, c-format
msgid "unknown\n"
msgstr "onbekend\n"

#: schedutils/chrt.c:143
#, c-format
msgid "failed to get pid %d's attributes"
msgstr "opvragen van eigenschappen voor PID %d is mislukt"

#: schedutils/chrt.c:146
#, c-format
msgid "pid %d's new scheduling priority: %d\n"
msgstr "Nieuwe scheduling-prioriteit van PID %d: %d\n"

#: schedutils/chrt.c:149
#, c-format
msgid "pid %d's current scheduling priority: %d\n"
msgstr "Huidige scheduling-prioriteit van PID %d: %d\n"

#: schedutils/chrt.c:178
#, c-format
msgid "SCHED_%s min/max priority\t: %d/%d\n"
msgstr "SCHED_%s minimum/maximum prioriteit:\t %d/%d\n"

#: schedutils/chrt.c:181
#, c-format
msgid "SCHED_%s not supported?\n"
msgstr "SCHED_%s wordt niet ondersteund?\n"

#: schedutils/chrt.c:243
msgid "failed to parse pid"
msgstr "ontleden van PID is mislukt"

#: schedutils/chrt.c:273
msgid "failed to parse priority"
msgstr "ontleden van prioriteit is mislukt"

#: schedutils/chrt.c:279
msgid "SCHED_RESET_ON_FORK flag is suppoted for SCHED_FIFO and SCHED_RR policies only"
msgstr "De vlag SCHED_RESET_ON_FORK wordt alleen voor SCHED_FIFO- en SCHED_RR-beleid ondersteund"

#: schedutils/chrt.c:289
#, c-format
msgid "failed to set pid %d's policy"
msgstr "instellen van beleid voor PID %d is mislukt"

#: schedutils/chrt.c:298
#, c-format
msgid "failed to execute %s"
msgstr "uitvoeren van %s is mislukt"

#: schedutils/ionice.c:57
msgid "ioprio_get failed"
msgstr "ioprio_get() is mislukt"

#: schedutils/ionice.c:75
msgid "ioprio_set failed"
msgstr "ioprio_set() is mislukt"

#: schedutils/ionice.c:81
#, c-format
msgid ""
"\n"
"ionice - sets or gets process io scheduling class and priority.\n"
"\n"
"Usage:\n"
"  ionice [ options ] -p <pid> [<pid> ...]\n"
"  ionice [ options ] <command> [<arg> ...]\n"
"\n"
"Options:\n"
"  -n <classdata>      class data (0-7, lower being higher prio)\n"
"  -c <class>          scheduling class\n"
"                      0: none, 1: realtime, 2: best-effort, 3: idle\n"
"  -t                  ignore failures\n"
"  -h                  this help\n"
"\n"
msgstr ""
"\n"
"ionice - zet of toont de in-/uitvoer-scheduling-klasse en -prioriteit\n"
"\n"
"Gebruik:\n"
"  ionice [opties] -p <PID>...\n"
"  ionice [opties] <opdracht> [<argument>...]\n"
"\n"
"Opties:\n"
"  -n <klassedata>    klassedata (0-7, lager is hogere prioriteit)\n"
"  -c <klasse>        scheduling-klasse -- 0=geen, 1=realtime,\n"
"                       2=zo_goed_als_het_gaat, 3=als_er_niks_anders_is\n"
"  -t                 mislukkingen negeren\n"
"  -h                 deze hulptekst tonen\n"
"\n"

#: schedutils/ionice.c:110 schedutils/ionice.c:112
#, c-format
msgid "cannot parse number '%s'"
msgstr "kan getal '%s' niet ontleden"

#: schedutils/ionice.c:151
msgid "ignoring given class data for none class"
msgstr "klassegegevens voor 'none'-klasse worden genegeerd"

#: schedutils/ionice.c:159
msgid "ignoring given class data for idle class"
msgstr "klassegegevens voor 'idle'-klasse worden genegeerd"

#: schedutils/ionice.c:163
#, c-format
msgid "bad prio class %d"
msgstr "ongeldige prioriteitsklasse %d"

#: schedutils/ionice.c:187 schedutils/taskset.c:183
#, c-format
msgid "executing %s failed"
msgstr "uitvoeren van '%s' is mislukt"

#: schedutils/taskset.c:38
#, c-format
msgid ""
"Usage: %s [options] [mask | cpu-list] [pid|cmd [args...]]\n"
"\n"
msgstr ""
"Gebruik:  %s [optie...] [masker|CPU-lijst] [PID|opdracht [argument...]]\n"
"\n"
"Processoraffiniteit tonen of instellen van de gegeven PID,\n"
"of een nieuw proces starten met de gegeven affiniteit.\n"
"\n"

#: schedutils/taskset.c:42
#, c-format
msgid ""
"Options:\n"
" -p, --pid               operate on existing given pid\n"
" -c, --cpu-list          display and specify cpus in list format\n"
" -h, --help              display this help\n"
" -V, --version           output version information\n"
"\n"
msgstr ""
"Opties:\n"
"  -p, --pid         de gegeven bestaande PID beïnvloeden\n"
"  -c, --cpu-list    de te gebruiken processoren (gegeven als lijst)\n"
"  -h, --help        deze hulptekst tonen\n"
"  -V, --version     programmaversie tonen\n"
"\n"

#: schedutils/taskset.c:49
#, c-format
msgid ""
"The default behavior is to run a new command:\n"
"    %1$s 03 sshd -b 1024\n"
"You can retrieve the mask of an existing task:\n"
"    %1$s -p 700\n"
"Or set it:\n"
"    %1$s -p 03 700\n"
"List format uses a comma-separated list instead of a mask:\n"
"    %1$s -pc 0,3,7-11 700\n"
"Ranges in list format can take a stride argument:\n"
"    e.g. 0-31:2 is equivalent to mask 0x55555555\n"
msgstr ""
"Standaard wordt een nieuw proces gestart, bijvoorbeeld:\n"
"    %1$s 03 sshd -b 1024\n"
"U kunt het masker van een bestaand proces opvragen:\n"
"    %1$s -p 700\n"
"Of instellen:\n"
"    %1$s -p 03 700\n"
"In plaats van een masker is een kommagescheiden lijst mogelijk:\n"
"    %1$s -pc 0,3,7-11 700\n"
"In een lijst kan op een bereik een stapargument volgen:\n"
"    0-31:2 is bijvoorbeeld hetzelfde als masker 0x55555555\n"

#: schedutils/taskset.c:61
#, c-format
msgid ""
"\n"
"For more information see taskset(1).\n"
msgstr ""
"\n"
"Voor meer informatie zie taskset(1).\n"

#: schedutils/taskset.c:113
msgid "cannot determine NR_CPUS; aborting"
msgstr "kan aantal processoren niet bepalen -- gestopt"

#: schedutils/taskset.c:122 schedutils/taskset.c:136
msgid "cpuset_alloc failed"
msgstr "cpuset_alloc() is mislukt"

#: schedutils/taskset.c:140 schedutils/taskset.c:165
#, c-format
msgid "failed to get pid %d's affinity"
msgstr "opvragen van affiniteit van PID %d is mislukt"

#: schedutils/taskset.c:143
#, c-format
msgid "pid %d's current affinity list: %s\n"
msgstr "Huidige affiniteitslijst van PID %d: %s\n"

#: schedutils/taskset.c:146
#, c-format
msgid "pid %d's current affinity mask: %s\n"
msgstr "Huidig affiniteitsmasker van PID %d: %s\n"

#: schedutils/taskset.c:157
#, c-format
msgid "failed to parse %s %s"
msgstr "ontleden van %s '%s' is mislukt"

#: schedutils/taskset.c:158
msgid "CPU list"
msgstr "processorenlijst"

#: schedutils/taskset.c:158
msgid "CPU mask"
msgstr "processorenmasker"

#: schedutils/taskset.c:162
#, c-format
msgid "failed to set pid %d's affinity"
msgstr "instellen van affiniteit van PID %d is mislukt"

#: schedutils/taskset.c:169
#, c-format
msgid "pid %d's new affinity list: %s\n"
msgstr "Nieuwe affiniteitslijst van PID %d: %s\n"

#: schedutils/taskset.c:172
#, c-format
msgid "pid %d's new affinity mask: %s\n"
msgstr "Nieuw affiniteitsmasker van PID %d: %s\n"

#: shlibs/mount/src/tab_parse.c:501
msgid "parse error at lines: "
msgstr "ontledingsfouten op regels: "

#: shlibs/mount/src/tab_parse.c:503
msgid "parse error at line: "
msgstr "ontledingsfout op regel: "

#: shlibs/mount/src/tab_parse.c:523
#, c-format
msgid " and %d."
msgstr " en %d."

#: sys-utils/ctrlaltdel.c:27
#, c-format
msgid "You must be root to set the Ctrl-Alt-Del behaviour.\n"
msgstr "U moet root zijn om het gedrag van Ctrl-Alt-Del in te kunnen stellen.\n"

#: sys-utils/ctrlaltdel.c:42
#, c-format
msgid "Usage: ctrlaltdel hard|soft\n"
msgstr "Gebruik:  ctrlaltdel hard|soft\n"

# wat die "For" betekent: geen idee
#: sys-utils/cytune.c:114
#, c-format
msgid ""
"File %s, For threshold value %lu, Maximum characters in fifo were %d,\n"
"and the maximum transfer rate in characters/second was %f\n"
msgstr ""
"Voor bestand %s, en met drempelwaarde %lu,\n"
"was het maximum aantal tekens in de fifo %d,\n"
"en de maximale overdrachtssnelheid %f tekens/seconde.\n"

#: sys-utils/cytune.c:125
#, c-format
msgid ""
"File %s, For threshold value %lu and timrout value %lu, Maximum characters in fifo were %d,\n"
"and the maximum transfer rate in characters/second was %f\n"
msgstr ""
"Voor bestand %s, en met drempelwaarde %lu en tijdslimiet %lu,\n"
"was het maximum aantal tekens in de fifo %d,\n"
"en de maximale overdrachtssnelheid %f tekens/seconde.\n"

#: sys-utils/cytune.c:189
#, c-format
msgid "Invalid interval value: %s\n"
msgstr "Ongeldige intervalwaarde: %s\n"

#: sys-utils/cytune.c:197
#, c-format
msgid "Invalid set value: %s\n"
msgstr "Ongeldige drempelwaarde: %s\n"

#: sys-utils/cytune.c:205
#, c-format
msgid "Invalid default value: %s\n"
msgstr "Ongeldige standaarddrempelwaarde: %s\n"

#: sys-utils/cytune.c:213
#, c-format
msgid "Invalid set time value: %s\n"
msgstr "Ongeldige waarde voor tijdslimiet: %s\n"

#: sys-utils/cytune.c:221
#, c-format
msgid "Invalid default time value: %s\n"
msgstr "Ongeldige standaardwaarde voor tijdslimiet: %s\n"

#: sys-utils/cytune.c:238
#, c-format
msgid "Usage: %s [-q [-i interval]] ([-s value]|[-S value]) ([-t value]|[-T value]) [-g|-G] file [file...]\n"
msgstr ""
"Gebruik:  %s [-q [-i interval]] ([-s waarde]|[-S waarde])\n"
"          ([-t waarde]|[-T waarde]) [-g|-G] bestand [bestand ...]\n"

#: sys-utils/cytune.c:250 sys-utils/cytune.c:269 sys-utils/cytune.c:289
#: sys-utils/cytune.c:339
#, c-format
msgid "Can't open %s: %s\n"
msgstr "Kan %s niet openen: %s\n"

#: sys-utils/cytune.c:257
#, c-format
msgid "Can't set %s to threshold %d: %s\n"
msgstr "Kan %s niet instellen op drempelwaarde %d: %s\n"

#: sys-utils/cytune.c:276
#, c-format
msgid "Can't set %s to time threshold %d: %s\n"
msgstr "Kan %s niet instellen op tijdsdrempel %d: %s\n"

#: sys-utils/cytune.c:294 sys-utils/cytune.c:351 sys-utils/cytune.c:382
#, c-format
msgid "Can't get threshold for %s: %s\n"
msgstr "Kan drempelwaarde voor %s niet verkrijgen: %s\n"

#: sys-utils/cytune.c:300 sys-utils/cytune.c:357 sys-utils/cytune.c:388
#, c-format
msgid "Can't get timeout for %s: %s\n"
msgstr "Kan tijdslimiet voor %s niet verkrijgen: %s\n"

#: sys-utils/cytune.c:306
#, c-format
msgid "%s: %ld current threshold and %ld current timeout\n"
msgstr "%s: %ld is huidige drempelwaarde en %ld is huidige tijdslimiet\n"

#: sys-utils/cytune.c:309
#, c-format
msgid "%s: %ld default threshold and %ld default timeout\n"
msgstr "%s: %ld is standaard drempelwaarde en %ld is standaard tijdslimiet\n"

#: sys-utils/cytune.c:327
msgid "Can't set signal handler"
msgstr "Kan geen signaalverwerker instellen"

#: sys-utils/cytune.c:331 sys-utils/cytune.c:366
msgid "gettimeofday failed"
msgstr "gettimeofday() is mislukt"

#: sys-utils/cytune.c:344 sys-utils/cytune.c:376
#, c-format
msgid "Can't issue CYGETMON on %s: %s\n"
msgstr "Kan ioctl(CYGETMON) niet uitvoeren op %s: %s\n"

#: sys-utils/cytune.c:418
#, c-format
msgid "%s: %lu ints, %lu/%lu chars; fifo: %lu thresh, %lu tmout, %lu max, %lu now\n"
msgstr ""
"%s: %lu onderbrekingen, %lu/%lu tekens;\n"
"fifo: %lu drempelwaarde, %lu tijdslimiet, %lu maximum, %lu nu\n"

#: sys-utils/cytune.c:424
#, c-format
msgid "   %f int/sec; %f rec, %f send (char/sec)\n"
msgstr "   %f onderbrekingen/sec; %f ontvangen, %f verzonden (tekens/sec)\n"

#: sys-utils/cytune.c:429
#, c-format
msgid "%s: %lu ints, %lu chars; fifo: %lu thresh, %lu tmout, %lu max, %lu now\n"
msgstr ""
"%s: %lu onderbrekingen, %lu tekens;\n"
"fifo: %lu drempelwaarde, %lu tijdslimiet, %lu maximum, %lu nu\n"

#: sys-utils/cytune.c:435
#, c-format
msgid "   %f int/sec; %f rec (char/sec)\n"
msgstr "   %f onderbrekingen/sec; %f ontvangen (tekens/sec)\n"

#: sys-utils/dmesg.c:45
#, c-format
msgid "Usage: %s [-c] [-n level] [-r] [-s bufsize]\n"
msgstr "Gebruik:  %s [-c] [-n niveau] [-r] [-s buffergrootte]\n"

#: sys-utils/fallocate.c:48
#, c-format
msgid ""
"Usage: %s [options] <filename>\n"
"\n"
"Options:\n"
msgstr ""
"Gebruik:  %s [opties] <bestandsnaam>\n"
"\n"
"Opties:\n"

#: sys-utils/fallocate.c:52
#, c-format
msgid ""
" -h, --help          this help\n"
" -n, --keep-size     don't modify the length of the file\n"
" -o, --offset <num>  offset of the allocation, in bytes\n"
" -l, --length <num>  length of the allocation, in bytes\n"
msgstr ""
"  -h, --help             deze hulptekst tonen\n"
"  -n, --keep-size        lengte van bestand niet wijzigen\n"
"  -o, --offset <getal>   positie van de reservering, in bytes\n"
"  -l, --length <getal>   lengte van de reservering, in bytes\n"

#: sys-utils/fallocate.c:57
#, c-format
msgid ""
"\n"
"For more information see fallocate(1).\n"
msgstr ""
"\n"
"Voor meer informatie zie fallocate(1).\n"

#: sys-utils/fallocate.c:115
msgid "no length argument specified"
msgstr "geen lengte gegeven"

#: sys-utils/fallocate.c:117
msgid "invalid length value specified"
msgstr "ongeldige lengte gegeven"

#: sys-utils/fallocate.c:119
msgid "invalid offset value specified"
msgstr "ongeldige plaatswaarde gegeven"

#: sys-utils/fallocate.c:121
msgid "no filename specified."
msgstr "geen bestandsnaam gegeven"

#: sys-utils/fallocate.c:126 sys-utils/fsfreeze.c:96
msgid "unexpected number of arguments"
msgstr "onverwacht aantal argumenten"

#: sys-utils/fallocate.c:146
msgid "keep size mode (-n option) unsupported"
msgstr "'keep-size'-modus (optie '-n') wordt niet ondersteund"

#: sys-utils/fallocate.c:147
#, c-format
msgid "%s: fallocate failed"
msgstr "%s: fallocate() is mislukt"

#: sys-utils/flock.c:65
#, c-format
msgid ""
"Usage: %1$s [-sxun][-w #] fd#\n"
"       %1$s [-sxon][-w #] file [-c] command...\n"
"       %1$s [-sxon][-w #] directory [-c] command...\n"
"  -s  --shared     Get a shared lock\n"
"  -x  --exclusive  Get an exclusive lock\n"
"  -u  --unlock     Remove a lock\n"
"  -n  --nonblock   Fail rather than wait\n"
"  -w  --timeout    Wait for a limited amount of time\n"
"  -o  --close      Close file descriptor before running command\n"
"  -c  --command    Run a single command string through the shell\n"
"  -h  --help       Display this text\n"
"  -V  --version    Display version\n"
msgstr ""

#: sys-utils/flock.c:192
#, c-format
msgid "%s: %s requires exactly one command argument\n"
msgstr "%s: %s vereist precies één opdrachtargument\n"

#: sys-utils/flock.c:219
#, c-format
msgid "%s: cannot open lock file %s: %s\n"
msgstr "%s: kan vergrendelingsbestand %s niet openen: %s\n"

#: sys-utils/flock.c:231
#, c-format
msgid "%s: bad number: %s\n"
msgstr "%s: ongeldig getal: %s\n"

#: sys-utils/flock.c:238
#, c-format
msgid "%s: requires file descriptor, file or directory\n"
msgstr "%s: vereist een bestandsdescriptor, een bestand of een map\n"

#: sys-utils/flock.c:296
#, c-format
msgid "%s: fork failed: %s\n"
msgstr "%s: fork() is mislukt: %s\n"

#: sys-utils/fsfreeze.c:41
#, c-format
msgid ""
"Usage: %s [options] <mount point>\n"
"\n"
"Options:\n"
msgstr ""
"Gebruik:  %s [opties] <aankoppelingspunt>\n"
"\n"
"Opties:\n"

#: sys-utils/fsfreeze.c:45
#, c-format
msgid ""
" -h, --help          this help\n"
" -f, --freeze        freeze the filesystem\n"
" -u, --unfreeze      unfreeze the filesystem\n"
msgstr ""
"  -h, --help        deze hulptekst tonen\n"
"  -f, --freeze      het bestandssysteem bevriezen\n"
"  -u, --unfreeze    het bestandssysteem ontdooien\n"

#: sys-utils/fsfreeze.c:49
#, c-format
msgid ""
"\n"
"For more information see fsfreeze(8).\n"
msgstr ""
"\n"
"Voor meer informatie zie fsfreeze(8).\n"

#: sys-utils/fsfreeze.c:90
msgid "no action specified"
msgstr "geen actie gegeven"

#: sys-utils/fsfreeze.c:92
msgid "no filename specified"
msgstr "geen bestandsnaam gegeven"

#: sys-utils/fsfreeze.c:105
#, c-format
msgid "%s: fstat failed"
msgstr "%s: fstat() is mislukt"

#: sys-utils/fsfreeze.c:110
#, c-format
msgid "%s: is not a directory"
msgstr "%s: is geen map"

#: sys-utils/fsfreeze.c:116
#, c-format
msgid "%s: freeze failed"
msgstr "%s: bevriezen is mislukt"

#: sys-utils/fsfreeze.c:121
#, c-format
msgid "%s: unfreeze failed"
msgstr "%s: ontdooien is mislukt"

#: sys-utils/ipcmk.c:84
#, c-format
msgid ""
"\n"
"Usage: %s [options]\n"
"\n"
msgstr ""
"\n"
"Gebruik:  %s [opties]\n"
"\n"

#: sys-utils/ipcmk.c:86
#, c-format
msgid ""
"  -M <size>     create shared memory segment of size <size>\n"
"  -S <nsems>    create semaphore array with <nsems> elements\n"
"  -Q            create message queue\n"
"  -p <mode>     permission for the resource (default is 0644)\n"
msgstr ""
"  -M <grootte>   gedeeld geheugensegment aanmaken met deze grootte\n"
"  -S <aantal>    semafoorarray aanmaken met <aantal> elementen\n"
"  -Q             berichtenwachtrij aanmaken\n"
"  -p <modus>     deze toegangsrechten toekennen (standaard 0644)\n"

#: sys-utils/ipcmk.c:90
#, c-format
msgid ""
"\n"
"For more information see ipcmk(1).\n"
"\n"
msgstr ""
"\n"
"Voor meer informatie zie ipcmk(1).\n"

#: sys-utils/ipcmk.c:142
msgid "create share memory failed"
msgstr "aanmaken van gedeeld geheugensegment is mislukt"

#: sys-utils/ipcmk.c:144
#, c-format
msgid "Shared memory id: %d\n"
msgstr "Gedeeld geheugensegment-ID: %d\n"

#: sys-utils/ipcmk.c:150
msgid "create message queue failed"
msgstr "aanmaken van berichtenwachtrij is mislukt"

#: sys-utils/ipcmk.c:152
#, c-format
msgid "Message queue id: %d\n"
msgstr "Berichtenwachtrij-ID: %d\n"

#: sys-utils/ipcmk.c:158
msgid "create semaphore failed"
msgstr "aanmaken van semafoor is mislukt"

#: sys-utils/ipcmk.c:160
#, c-format
msgid "Semaphore id: %d\n"
msgstr "Semafoor-ID: %d\n"

#: sys-utils/ipcrm.c:64
#, c-format
msgid "invalid id: %s\n"
msgstr "ongeldig ID: %s\n"

#: sys-utils/ipcrm.c:82
#, c-format
msgid "cannot remove id %s (%s)\n"
msgstr "kan ID %s niet verwijderen (%s)\n"

#: sys-utils/ipcrm.c:97
#, c-format
msgid "deprecated usage: %s {shm | msg | sem} id ...\n"
msgstr "Afgeraden gebruik:  %s [shm | msg | sem] ID ...\n"

#: sys-utils/ipcrm.c:124
#, c-format
msgid "unknown resource type: %s\n"
msgstr "onbekende bronsoort: %s\n"

#: sys-utils/ipcrm.c:128
#, c-format
msgid "resource(s) deleted\n"
msgstr "bron(nen) verwijderd\n"

#: sys-utils/ipcrm.c:138
#, c-format
msgid ""
"usage: %s [ [-q msqid] [-m shmid] [-s semid]\n"
"          [-Q msgkey] [-M shmkey] [-S semkey] ... ]\n"
msgstr ""
"Gebruik:  %s [ [-q msq_ID] [-m shm_ID] [-s sem_ID]\n"
"                  [-Q msq_sleutel] [-M shm_sleutel] [-S sem_sleutel] ... ]\n"

#: sys-utils/ipcrm.c:179
#, c-format
msgid "%s: illegal option -- %c\n"
msgstr "%s: ongeldige optie -- %c\n"

#: sys-utils/ipcrm.c:191
#, c-format
msgid "%s: illegal key (%s)\n"
msgstr "%s: ongeldige sleutel (%s)\n"

#: sys-utils/ipcrm.c:206 sys-utils/ipcrm.c:238
msgid "permission denied for key"
msgstr "toegang geweigerd voor sleutel"

#: sys-utils/ipcrm.c:209 sys-utils/ipcrm.c:248
msgid "already removed key"
msgstr "sleutel is al verwijderd"

#: sys-utils/ipcrm.c:212 sys-utils/ipcrm.c:243
msgid "invalid key"
msgstr "ongeldige sleutel"

#: sys-utils/ipcrm.c:215 sys-utils/ipcrm.c:253
msgid "unknown error in key"
msgstr "onbekende fout in sleutel"

#: sys-utils/ipcrm.c:239
msgid "permission denied for id"
msgstr "toegang geweigerd voor ID"

#: sys-utils/ipcrm.c:244
msgid "invalid id"
msgstr "ongeldig ID"

#: sys-utils/ipcrm.c:249
msgid "already removed id"
msgstr "ID is al verwijderd"

#: sys-utils/ipcrm.c:254
msgid "unknown error in id"
msgstr "onbekende fout in ID"

#: sys-utils/ipcrm.c:257
#, c-format
msgid "%s: %s (%s)\n"
msgstr "%s: %s (%s)\n"

#: sys-utils/ipcrm.c:265
#, c-format
msgid "%s: unknown argument: %s\n"
msgstr "%s: onbekend argument: %s\n"

#: sys-utils/ipcs.c:114
#, c-format
msgid ""
"Usage: %1$s [-asmq] [-t|-c|-l|-u|-p]\n"
"       %1$s [-s|-m|-q] -i id\n"
"       %1$s -h for help\n"
msgstr ""
"Gebruik: %1$s [-asmq] [-t|-c|-l|-u|-p]\n"
"         %1$s [-s|-m|-q] -i ID\n"
"         %1$s -h    (voor hulp)\n"

#: sys-utils/ipcs.c:123
#, c-format
msgid ""
"Usage: %1$s [resource]... [output-format]\n"
"       %1$s [resource] -i id\n"
"\n"
msgstr ""
"Gebruik: %1$s [bron]... [uitvoeropmaak]\n"
"         %1$s [bron] -i ID\n"
"\n"

#: sys-utils/ipcs.c:127
#, c-format
msgid ""
"Provide information on IPC facilities for which you have read access.\n"
"\n"
msgstr ""
"Geeft informatie over IPC-voorzieningen waarvoor u leestoegang hebt.\n"
"\n"

#: sys-utils/ipcs.c:131
#, c-format
msgid ""
"    -h      display this help\n"
"    -i id   print details on resource identified by id\n"
"\n"
msgstr ""
"    -h      deze hulptekst tonen\n"
"    -i ID   details weergeven over de met ID aangegeven bron\n"
"\n"

#: sys-utils/ipcs.c:134
#, c-format
msgid ""
"Resource options:\n"
"    -m      shared memory segments\n"
"    -q      message queues\n"
"    -s      semaphores\n"
"    -a      all (default)\n"
"\n"
msgstr ""
"Bronopties:\n"
"    -m      gedeelde geheugensegmenten\n"
"    -q      berichtwachtrijen\n"
"    -s      semaforen\n"
"    -a      alle (is standaard)\n"
"\n"

#: sys-utils/ipcs.c:140
#, c-format
msgid ""
"Output format:\n"
"    -t      time\n"
"    -p      pid\n"
"    -c      creator\n"
"    -l      limits\n"
"    -u      summary\n"
msgstr ""
"Uitvoeropmaak:\n"
"    -t      tijd\n"
"    -p      PID\n"
"    -c      aanmaker\n"
"    -l      grenzen\n"
"    -u      samenvatting\n"

#: sys-utils/ipcs.c:268
#, c-format
msgid "kernel not configured for shared memory\n"
msgstr "kernel is niet ingesteld voor gedeeld geheugen\n"

#: sys-utils/ipcs.c:274
#, c-format
msgid "------ Shared Memory Limits --------\n"
msgstr "------ Gedeeld geheugen: grenzen --------\n"

#: sys-utils/ipcs.c:279
#, c-format
msgid "max number of segments = %lu\n"
msgstr "maximum aantal segmenten = %lu\n"

#: sys-utils/ipcs.c:281
#, c-format
msgid "max seg size (kbytes) = %lu\n"
msgstr "maximale segmentgrootte (kilobytes) = %lu\n"

#: sys-utils/ipcs.c:283
#, c-format
msgid "max total shared memory (kbytes) = %llu\n"
msgstr "maximum totaal gedeeld geheugen (kilobytes) = %llu\n"

#: sys-utils/ipcs.c:285
#, c-format
msgid "min seg size (bytes) = %lu\n"
msgstr "minimale segmentgrootte (bytes) = %lu\n"

#: sys-utils/ipcs.c:290
#, c-format
msgid "------ Shared Memory Status --------\n"
msgstr "------ Gedeeld geheugen: status --------\n"

#: sys-utils/ipcs.c:291
#, c-format
msgid "segments allocated %d\n"
msgstr "gereserveerde segmenten =  %d\n"

#: sys-utils/ipcs.c:292
#, c-format
msgid "pages allocated %ld\n"
msgstr "gereserveerde pagina's = %ld\n"

#: sys-utils/ipcs.c:293
#, c-format
msgid "pages resident  %ld\n"
msgstr "pagina's in geheugen = %ld\n"

#: sys-utils/ipcs.c:294
#, c-format
msgid "pages swapped   %ld\n"
msgstr "pagina's in wisselgeheugen = %ld\n"

#: sys-utils/ipcs.c:295
#, c-format
msgid "Swap performance: %ld attempts\t %ld successes\n"
msgstr "Wisselgeheugenprestaties: %ld pogingen, %ld succesvol\n"

#: sys-utils/ipcs.c:300
#, c-format
msgid "------ Shared Memory Segment Creators/Owners --------\n"
msgstr "------ Gedeeld geheugen: segmentaanmakers/eigenaars --------\n"

#: sys-utils/ipcs.c:302 sys-utils/ipcs.c:308 sys-utils/ipcs.c:315
#: sys-utils/ipcs.c:321
msgid "shmid"
msgstr "shm-ID"

#: sys-utils/ipcs.c:302 sys-utils/ipcs.c:321 sys-utils/ipcs.c:422
#: sys-utils/ipcs.c:437 sys-utils/ipcs.c:520 sys-utils/ipcs.c:538
msgid "perms"
msgstr "rechten"

#: sys-utils/ipcs.c:302 sys-utils/ipcs.c:422 sys-utils/ipcs.c:520
msgid "cuid"
msgstr "maker-UID"

#: sys-utils/ipcs.c:302 sys-utils/ipcs.c:422 sys-utils/ipcs.c:520
msgid "cgid"
msgstr "maker-GID"

#: sys-utils/ipcs.c:302 sys-utils/ipcs.c:422 sys-utils/ipcs.c:520
msgid "uid"
msgstr "UID"

#: sys-utils/ipcs.c:302 sys-utils/ipcs.c:422 sys-utils/ipcs.c:520
msgid "gid"
msgstr "GID"

#: sys-utils/ipcs.c:306
#, c-format
msgid "------ Shared Memory Attach/Detach/Change Times --------\n"
msgstr "------ Gedeeld geheugen: aanhecht-/onthecht-/wijzigingstijden --------\n"

#: sys-utils/ipcs.c:308 sys-utils/ipcs.c:315 sys-utils/ipcs.c:321
#: sys-utils/ipcs.c:428 sys-utils/ipcs.c:437 sys-utils/ipcs.c:526
#: sys-utils/ipcs.c:532 sys-utils/ipcs.c:538
msgid "owner"
msgstr "eigenaar"

#: sys-utils/ipcs.c:308
msgid "attached"
msgstr "aangehecht"

#: sys-utils/ipcs.c:308
msgid "detached"
msgstr "onthecht"

#: sys-utils/ipcs.c:309
msgid "changed"
msgstr "gewijzigd"

#: sys-utils/ipcs.c:313
#, c-format
msgid "------ Shared Memory Creator/Last-op PIDs --------\n"
msgstr "------ Gedeeld geheugen: PID's van aanmaker/laatste-operatie --------\n"

#: sys-utils/ipcs.c:315
msgid "cpid"
msgstr "maker-PID"

#: sys-utils/ipcs.c:315
msgid "lpid"
msgstr "laatste-PID"

#: sys-utils/ipcs.c:319
#, c-format
msgid "------ Shared Memory Segments --------\n"
msgstr "------ Gedeeld geheugen: segmenten --------\n"

#: sys-utils/ipcs.c:321 sys-utils/ipcs.c:437 sys-utils/ipcs.c:538
msgid "key"
msgstr "sleutel"

#: sys-utils/ipcs.c:321
msgid "bytes"
msgstr "bytes"

#: sys-utils/ipcs.c:322
msgid "nattch"
msgstr "gehecht"

#: sys-utils/ipcs.c:322
msgid "status"
msgstr "status"

#: sys-utils/ipcs.c:343 sys-utils/ipcs.c:345 sys-utils/ipcs.c:347
#: sys-utils/ipcs.c:458 sys-utils/ipcs.c:460 sys-utils/ipcs.c:559
#: sys-utils/ipcs.c:561 sys-utils/ipcs.c:563 sys-utils/ipcs.c:614
#: sys-utils/ipcs.c:616 sys-utils/ipcs.c:644 sys-utils/ipcs.c:646
#: sys-utils/ipcs.c:648 sys-utils/ipcs.c:671
msgid "Not set"
msgstr "(geen)"

#: sys-utils/ipcs.c:375
msgid "dest"
msgstr "doel"

#: sys-utils/ipcs.c:376
msgid "locked"
msgstr "vergrendeld"

#: sys-utils/ipcs.c:396
#, c-format
msgid "kernel not configured for semaphores\n"
msgstr "deze kernel kent geen semaforen\n"

#: sys-utils/ipcs.c:402
#, c-format
msgid "------ Semaphore Limits --------\n"
msgstr "------ Semaforen: grenzen --------\n"

#: sys-utils/ipcs.c:406
#, c-format
msgid "max number of arrays = %d\n"
msgstr "maximum aantal arrays = %d\n"

#: sys-utils/ipcs.c:407
#, c-format
msgid "max semaphores per array = %d\n"
msgstr "maximum aantal semaforen per array = %d\n"

#: sys-utils/ipcs.c:408
#, c-format
msgid "max semaphores system wide = %d\n"
msgstr "maximum aantal semaforen systeemwijd = %d\n"

#: sys-utils/ipcs.c:409
#, c-format
msgid "max ops per semop call = %d\n"
msgstr "maximum aantal operaties per semop()-aanroep = %d\n"

#: sys-utils/ipcs.c:410
#, c-format
msgid "semaphore max value = %d\n"
msgstr "maximale semafoorwaarde = %d\n"

#: sys-utils/ipcs.c:414
#, c-format
msgid "------ Semaphore Status --------\n"
msgstr "------ Semaforen: status --------\n"

#: sys-utils/ipcs.c:415
#, c-format
msgid "used arrays = %d\n"
msgstr "gebruikte arrays = %d\n"

#: sys-utils/ipcs.c:416
#, c-format
msgid "allocated semaphores = %d\n"
msgstr "gereserveerde semaforen = %d\n"

#: sys-utils/ipcs.c:420
#, c-format
msgid "------ Semaphore Arrays Creators/Owners --------\n"
msgstr "------ Semaforen: arrayaanmakers/-eigenaars --------\n"

#: sys-utils/ipcs.c:422 sys-utils/ipcs.c:428 sys-utils/ipcs.c:437
msgid "semid"
msgstr "sem-ID"

#: sys-utils/ipcs.c:426
#, c-format
msgid "------ Semaphore Operation/Change Times --------\n"
msgstr "------ Semaforen: operatie-/wijzigingstijden --------\n"

#: sys-utils/ipcs.c:428
msgid "last-op"
msgstr "laatste operatie"

#: sys-utils/ipcs.c:428
msgid "last-changed"
msgstr "laatst gewijzigd"

#: sys-utils/ipcs.c:435
#, c-format
msgid "------ Semaphore Arrays --------\n"
msgstr "------ Semaforen: arrays --------\n"

#: sys-utils/ipcs.c:437
msgid "nsems"
msgstr "nsems"

#: sys-utils/ipcs.c:496
#, c-format
msgid "kernel not configured for message queues\n"
msgstr "kernel is niet ingesteld voor berichtwachtrijen\n"

#: sys-utils/ipcs.c:504
#, c-format
msgid "------ Messages Limits --------\n"
msgstr "------ Berichten: grenzen --------\n"

#: sys-utils/ipcs.c:505
#, c-format
msgid "max queues system wide = %d\n"
msgstr "maximum aantal wachtrijen systeemwijd = %d\n"

#: sys-utils/ipcs.c:506
#, c-format
msgid "max size of message (bytes) = %d\n"
msgstr "maximumgrootte van bericht (bytes) = %d\n"

#: sys-utils/ipcs.c:507
#, c-format
msgid "default max size of queue (bytes) = %d\n"
msgstr "standaard-maximumgrootte van wachtrij (bytes) = %d\n"

#: sys-utils/ipcs.c:511
#, c-format
msgid "------ Messages Status --------\n"
msgstr "------ Berichten: status --------\n"

#: sys-utils/ipcs.c:512
#, c-format
msgid "allocated queues = %d\n"
msgstr "gereserveerde wachtrijen = %d\n"

#: sys-utils/ipcs.c:513
#, c-format
msgid "used headers = %d\n"
msgstr "gebruikte koppen = %d\n"

#: sys-utils/ipcs.c:514
#, c-format
msgid "used space = %d bytes\n"
msgstr "gebruikte ruimte = %d bytes\n"

#: sys-utils/ipcs.c:518
#, c-format
msgid "------ Message Queues Creators/Owners --------\n"
msgstr "------ Berichtwachtrijen: aanmakers/eigenaars --------\n"

#: sys-utils/ipcs.c:520 sys-utils/ipcs.c:526 sys-utils/ipcs.c:532
#: sys-utils/ipcs.c:538
msgid "msqid"
msgstr "msq-ID"

#: sys-utils/ipcs.c:524
#, c-format
msgid "------ Message Queues Send/Recv/Change Times --------\n"
msgstr "------ Berichtwachtrijen: verzend-/ontvang-/wijzigingstijden --------\n"

#: sys-utils/ipcs.c:526
msgid "send"
msgstr "verzending"

#: sys-utils/ipcs.c:526
msgid "recv"
msgstr "ontvangst"

#: sys-utils/ipcs.c:526
msgid "change"
msgstr "wijziging"

#: sys-utils/ipcs.c:530
#, c-format
msgid "------ Message Queues PIDs --------\n"
msgstr "------ Berichtwachtrijen: PID's --------\n"

#: sys-utils/ipcs.c:532
msgid "lspid"
msgstr "la.ze.PID"

#: sys-utils/ipcs.c:532
msgid "lrpid"
msgstr "la.ov.PID"

#: sys-utils/ipcs.c:536
#, c-format
msgid "------ Message Queues --------\n"
msgstr "------ Berichtwachtrijen --------\n"

#: sys-utils/ipcs.c:539
msgid "used-bytes"
msgstr "gebruikt"

#: sys-utils/ipcs.c:539
msgid "messages"
msgstr "berichten"

#: sys-utils/ipcs.c:603
msgid "shmctl failed"
msgstr "shmctl() is mislukt"

#: sys-utils/ipcs.c:605
#, c-format
msgid ""
"\n"
"Shared memory Segment shmid=%d\n"
msgstr ""
"\n"
"Gedeeld geheugensegment met shm-ID=%d\n"

#: sys-utils/ipcs.c:606
#, c-format
msgid "uid=%d\tgid=%d\tcuid=%d\tcgid=%d\n"
msgstr "UID=%d  GID=%d,  maker-UID=%d\t  maker-GID=%d\n"

#: sys-utils/ipcs.c:608
#, c-format
msgid "mode=%#o\taccess_perms=%#o\n"
msgstr "modus=%#o  toegangsrechten=%#o\n"

#: sys-utils/ipcs.c:610
#, c-format
msgid "bytes=%ld\tlpid=%d\tcpid=%d\tnattch=%ld\n"
msgstr "bytes=%ld  laatste-PID=%d  maker-PID=%d  aanhechtingen=%ld\n"

#: sys-utils/ipcs.c:613
#, c-format
msgid "att_time=%-26.24s\n"
msgstr "aanhechttijd   = %-26.24s\n"

#: sys-utils/ipcs.c:615
#, c-format
msgid "det_time=%-26.24s\n"
msgstr "onthechttijd   = %-26.24s\n"

#: sys-utils/ipcs.c:617 sys-utils/ipcs.c:647
#, c-format
msgid "change_time=%-26.24s\n"
msgstr "wijzigingstijd = %-26.24s\n"

#: sys-utils/ipcs.c:629
msgid "msgctl failed"
msgstr "msgctl() is mislukt"

#: sys-utils/ipcs.c:631
#, c-format
msgid ""
"\n"
"Message Queue msqid=%d\n"
msgstr ""
"\n"
"Berichtenwachtrij met msq-ID=%d\n"

#: sys-utils/ipcs.c:632
#, c-format
msgid "uid=%d\tgid=%d\tcuid=%d\tcgid=%d\tmode=%#o\n"
msgstr "UID=%d  GID=%d,  maker-UID=%d  maker-GID=%d,  modus=%#o\n"

#: sys-utils/ipcs.c:634
#, c-format
msgid "cbytes=%ld\tqbytes=%ld\tqnum=%ld\tlspid=%d\tlrpid=%d\n"
msgstr ""
"gebruikte bytes=%ld  wachtrijbytes=%ld  aantal berichten=%ld\n"
"laatste-zender-PID=%d  laatste-ontvanger-PID=%d\n"

#: sys-utils/ipcs.c:643
#, c-format
msgid "send_time=%-26.24s\n"
msgstr "verzendtijd   = %-26.24s\n"

#: sys-utils/ipcs.c:645
#, c-format
msgid "rcv_time=%-26.24s\n"
msgstr "ontvangsttijd = %-26.24s\n"

#: sys-utils/ipcs.c:662 sys-utils/ipcs.c:684
msgid "semctl failed"
msgstr "semctl() is mislukt"

#: sys-utils/ipcs.c:664
#, c-format
msgid ""
"\n"
"Semaphore Array semid=%d\n"
msgstr ""
"\n"
"Semafoorarray met sem-ID=%d\n"

#: sys-utils/ipcs.c:665
#, c-format
msgid "uid=%d\t gid=%d\t cuid=%d\t cgid=%d\n"
msgstr "UID=%d  GID=%d,  maker-UID=%d  maker-GID=%d\n"

#: sys-utils/ipcs.c:667
#, c-format
msgid "mode=%#o, access_perms=%#o\n"
msgstr "modus=%#o, toegangsrechten=%#o\n"

#: sys-utils/ipcs.c:669
#, c-format
msgid "nsems = %ld\n"
msgstr "aantal semaforen = %ld\n"

#: sys-utils/ipcs.c:670
#, c-format
msgid "otime = %-26.24s\n"
msgstr "laatste operatietijd   = %-26.24s\n"

#: sys-utils/ipcs.c:672
#, c-format
msgid "ctime = %-26.24s\n"
msgstr "laatste wijzigingstijd = %-26.24s\n"

#: sys-utils/ipcs.c:675
msgid "semnum"
msgstr "semnum"

#: sys-utils/ipcs.c:675
msgid "value"
msgstr "waarde"

#: sys-utils/ipcs.c:675
msgid "ncount"
msgstr "ncount"

#: sys-utils/ipcs.c:675
msgid "zcount"
msgstr "zcount"

#: sys-utils/ipcs.c:675
msgid "pid"
msgstr "PID"

#: sys-utils/ldattach.c:133
#, c-format
msgid "invalid iflag: %s"
msgstr "ongeldige invoervlag: %s"

#: sys-utils/ldattach.c:151
#, c-format
msgid ""
"\n"
"Usage: %s [ -dhV78neo12 ] [ -s <speed> ] [ -i [-]<iflag> ] <ldisc> <device>\n"
msgstr ""
"\n"
"Gebruik:  %s [-dhV78neo12] [-s <snelheid>] [-i [-]<invoervlag>]\n"
"                  <lijnprotocol> <apparaat>\n"

#: sys-utils/ldattach.c:153
msgid ""
"\n"
"Known <ldisc> names:\n"
msgstr ""
"\n"
"Mogelijke lijnprotocollen zijn:\n"

#: sys-utils/ldattach.c:155
msgid ""
"\n"
"Known <iflag> names:\n"
msgstr ""
"\n"
"Mogelijke invoervlaggen zijn:\n"

#: sys-utils/ldattach.c:240
#, c-format
msgid "invalid speed: %s"
msgstr "ongeldige snelheid: %s"

#: sys-utils/ldattach.c:246
#, c-format
msgid "ldattach from %s\n"
msgstr "'ldattach' uit %s\n"

#: sys-utils/ldattach.c:251 text-utils/tailf.c:206
msgid "invalid option"
msgstr "ongeldige optie"

#: sys-utils/ldattach.c:264
#, c-format
msgid "invalid line discipline: %s"
msgstr "ongeldig lijnprotocol: %s"

#: sys-utils/ldattach.c:272
#, c-format
msgid "%s is not a serial line"
msgstr "%s is geen seriële lijn"

#: sys-utils/ldattach.c:278
#, c-format
msgid "cannot get terminal attributes for %s"
msgstr "kan terminaleigenschappen van %s niet bepalen"

#: sys-utils/ldattach.c:281
#, c-format
msgid "speed %d unsupported"
msgstr "snelheid %d is niet mogelijk"

#: sys-utils/ldattach.c:316
#, c-format
msgid "cannot set terminal attributes for %s"
msgstr "kan terminaleigenschappen van %s niet instellen"

#: sys-utils/ldattach.c:323
msgid "cannot set line discipline"
msgstr "kan lijnprotocol niet instellen"

#: sys-utils/ldattach.c:329
msgid "cannot daemonize"
msgstr "kan er geen achtergronddienst van maken"

#: sys-utils/lscpu.c:54
msgid "none"
msgstr "geen"

#: sys-utils/lscpu.c:55
msgid "para"
msgstr "semi"

#: sys-utils/lscpu.c:56
msgid "full"
msgstr "compleet"

#: sys-utils/lscpu.c:158
#, c-format
msgid "error: cannot open %s"
msgstr "fout: kan %s niet openen"

#: sys-utils/lscpu.c:186 sys-utils/lscpu.c:207 sys-utils/lscpu.c:251
#, c-format
msgid "failed to read: %s"
msgstr "lezen van %s is mislukt"

#: sys-utils/lscpu.c:209
#, c-format
msgid "parse error: %s"
msgstr "ontledingsfout: %s"

#: sys-utils/lscpu.c:233
msgid "error: strdup failed"
msgstr "fout: strdup() is mislukt"

#: sys-utils/lscpu.c:260
msgid "failed to callocate cpu set"
msgstr "reserveren van geheugen voor processorenset is mislukt"

#: sys-utils/lscpu.c:263
#, c-format
msgid "failed to parse CPU mask %s"
msgstr "ontleden van processorenmasker %s is mislukt"

#: sys-utils/lscpu.c:318
msgid "error: uname failed"
msgstr "fout: uname() is mislukt"

#: sys-utils/lscpu.c:541 sys-utils/lscpu.c:544 sys-utils/lscpu.c:620
#: sys-utils/lscpu.c:641
msgid "error: calloc failed"
msgstr "fout: calloc() is mislukt"

#: sys-utils/lscpu.c:657
#, c-format
msgid ""
"# The following is the parsable format, which can be fed to other\n"
"# programs. Each different item in every column has an unique ID\n"
"# starting from zero.\n"
"# CPU,Core,Socket,Node"
msgstr ""
"# Hieronder volgt de ontleedbare uitvoer die als invoer voor\n"
"# andere programma's gebruikt kan worden.  Elk verschillend\n"
"# item in elke kolom heeft een uniek ID, beginnend bij nul.\n"
"# CPU,kern,voet,node"

#: sys-utils/lscpu.c:738
msgid "Architecture:"
msgstr "Architectuur:"

#: sys-utils/lscpu.c:756
msgid "CPU op-mode(s):"
msgstr "CPU-modus(sen):"

#: sys-utils/lscpu.c:762
msgid "Thread(s) per core:"
msgstr "Draden per kern:"

#: sys-utils/lscpu.c:763
msgid "Core(s) per socket:"
msgstr "Kern(en) per voet:"

#: sys-utils/lscpu.c:764
msgid "CPU socket(s):"
msgstr "CPU-voet(en):"

#: sys-utils/lscpu.c:768
msgid "NUMA node(s):"
msgstr "NUMA-node(s):"

#: sys-utils/lscpu.c:770
msgid "Vendor ID:"
msgstr "Producent-ID:"

#: sys-utils/lscpu.c:772
msgid "CPU family:"
msgstr "CPU-familie:"

#: sys-utils/lscpu.c:774
msgid "Model:"
msgstr "Model:"

#: sys-utils/lscpu.c:776
msgid "Stepping:"
msgstr "Stepping:"

#: sys-utils/lscpu.c:778
msgid "CPU MHz:"
msgstr "CPU-frequentie (MHz):"

#: sys-utils/lscpu.c:781 sys-utils/lscpu.c:783
msgid "Virtualization:"
msgstr "Virtualisatie:"

#: sys-utils/lscpu.c:786
msgid "Hypervisor vendor:"
msgstr "Hypervisorproducent:"

#: sys-utils/lscpu.c:787
msgid "Virtualization type:"
msgstr "Virtualisatiesoort:"

#: sys-utils/lscpu.c:795
#, c-format
msgid "%s cache:"
msgstr "%s-cache:"

#: sys-utils/lscpu.c:805
#, c-format
msgid "NUMA node%d CPU(s):"
msgstr "NUMA-node%d CPU('s):"

#: sys-utils/lscpu.c:816
#, c-format
msgid "Usage: %s [option]\n"
msgstr "Gebruik:  %s [optie]\n"

#: sys-utils/lscpu.c:819
msgid ""
"CPU architecture information helper\n"
"\n"
"  -h, --help     usage information\n"
"  -p, --parse    print out in parsable instead of printable format.\n"
"  -s, --sysroot  use the directory as a new system root.\n"
msgstr ""
"Toont informatie over de processorarchitectuur.\n"
"\n"
"  -h, --help          deze hulptekst tonen\n"
"  -p, --parse         ontleedbare i.p.v. leesbare uitvoer produceren\n"
"  -s, --sysroot MAP   deze MAP als hoofdmap gebruiken\n"

#: sys-utils/readprofile.c:72 text-utils/more.c:798
#, c-format
msgid "out of memory"
msgstr "onvoldoende geheugen beschikbaar"

#: sys-utils/readprofile.c:118
#, c-format
msgid ""
"%s: Usage: \"%s [options]\n"
"\t -m <mapfile>  (defaults: \"%s\" and\n"
"\t\t\t\t  \"%s\")\n"
"\t -p <pro-file> (default: \"%s\")\n"
"\t -M <mult>     set the profiling multiplier to <mult>\n"
"\t -i            print only info about the sampling step\n"
"\t -v            print verbose data\n"
"\t -a            print all symbols, even if count is 0\n"
"\t -b            print individual histogram-bin counts\n"
"\t -s            print individual counters within functions\n"
"\t -r            reset all the counters (root only)\n"
"\t -n            disable byte order auto-detection\n"
"\t -V            print version and exit\n"
msgstr ""
"%s: Gebruik:  %s [opties]\n"
"  -M <mult>  profileervermenigvuldiger op <mult> instellen\n"
"  -m <symbolenbestand>   (standaard: %s en\n"
"                                     %s)\n"
"  -p <profileerbestand>  (standaard: %s)\n"
"  -a         alle symbolen tonen, ook als het aantal nul is\n"
"  -b         individuele histogrambalk-aantallen weergeven\n"
"  -i         alleen info over bemonsteringsstap tonen\n"
"  -n         autodetectie van bytevolgorde uitzetten\n"
"  -r         alle tellers opnieuw op nul instellen (alleen door root)\n"
"  -s         individuele tellers in functies weergeven\n"
"  -v         gedetailleerde uitvoer produceren\n"
"  -V         programmaversie tonen\n"

#: sys-utils/readprofile.c:227
#, c-format
msgid "readprofile: error writing %s: %s\n"
msgstr "readprofile: fout bij schrijven van %s: %s\n"

#: sys-utils/readprofile.c:268
#, c-format
msgid "Assuming reversed byte order. Use -n to force native byte order.\n"
msgstr ""
"Omgekeerde byte-volgorde wordt aangenomen.\n"
"Gebruik '-n' om de normale byte-volgorde te gebruiken.\n"

#: sys-utils/readprofile.c:284
#, c-format
msgid "Sampling_step: %i\n"
msgstr "Bemonsteringsstap: %i\n"

#: sys-utils/readprofile.c:305 sys-utils/readprofile.c:331
#, c-format
msgid "%s: %s(%i): wrong map line\n"
msgstr "%s: %s(%i): foutieve regel in symbolenbestand\n"

#: sys-utils/readprofile.c:318
#, c-format
msgid "%s: can't find \"_stext\" in %s\n"
msgstr "%s: kan \"_stext\" niet vinden in %s\n"

#: sys-utils/readprofile.c:352
#, c-format
msgid "%s: profile address out of range. Wrong map file?\n"
msgstr "%s: profileringsadres valt buiten bereik.  Verkeerd symbolenbestand?\n"

#: sys-utils/readprofile.c:412
msgid "total"
msgstr "totaal"

#: sys-utils/renice.c:53
#, c-format
msgid ""
"\n"
"Usage:\n"
" renice [-n] priority [-p|--pid] pid  [... pid]\n"
" renice [-n] priority  -g|--pgrp pgrp [... pgrp]\n"
" renice [-n] priority  -u|--user user [... user]\n"
" renice -h | --help\n"
" renice -v | --version\n"
"\n"
msgstr ""
"\n"
"Gebruik:\n"
"  renice [-n] prioriteit [-p|--pid] PID...\n"
"  renice [-n] prioriteit  -g|--pgrp PGID...\n"
"  renice [-n] prioriteit  -u|--user gebruiker...\n"
"  renice -h | --help\n"
"  renice -v | --version\n"
"\n"

#: sys-utils/renice.c:89
#, c-format
msgid "renice from %s\n"
msgstr "'renice' uit %s\n"

#: sys-utils/renice.c:126
#, c-format
msgid "renice: %s: unknown user\n"
msgstr "renice: %s: onbekende gebruiker\n"

#: sys-utils/renice.c:134
#, c-format
msgid "renice: %s: bad value\n"
msgstr "renice: %s: ongeldige waarde\n"

#: sys-utils/renice.c:152 sys-utils/renice.c:164
msgid "getpriority"
msgstr "getpriority()"

#: sys-utils/renice.c:157
msgid "setpriority"
msgstr "setpriority()"

#: sys-utils/renice.c:168
#, c-format
msgid "%d: old priority %d, new priority %d\n"
msgstr "%d: oude prioriteit is %d, nieuwe prioriteit is %d\n"

#: sys-utils/rtcwake.c:85
#, c-format
msgid ""
"usage: %s [options]\n"
"    -d | --device <device>    select rtc device (rtc0|rtc1|...)\n"
"    -n | --dry-run            does everything, but suspend\n"
"    -l | --local              RTC uses local timezone\n"
"    -m | --mode               standby|mem|... sleep mode\n"
"    -s | --seconds <seconds>  seconds to sleep\n"
"    -t | --time <time_t>      time to wake\n"
"    -u | --utc                RTC uses UTC\n"
"    -v | --verbose            verbose messages\n"
"    -V | --version            show version\n"
msgstr ""
"Gebruik:  %s [opties]\n"
"\n"
"    -d | --device <apparaat>   te gebruiken hardwarklok (rtc0|rtc1|...)\n"
"    -l | --local               de hardwareklok bevat lokale tijd\n"
"    -m | --mode <modus>        slaapmodus (waarden: standby|mem|disk|...\n"
"                                 oftewel: wachtstand,pauzestand,slaapstand,...)\n"
"    -n | --dry-run             alles doen behalve gaan slapen\n"
"    -s | --seconds <seconden>  aantal te slapen seconden\n"
"    -t | --time <tijdstip>     ontwakingstijdstip\n"
"    -u | --utc                 de hardwareklok bevat UTC\n"
"    -v | --verbose             gedetailleerde uitvoer produceren\n"
"    -V | --version             programmaversie tonen\n"

#: sys-utils/rtcwake.c:145
msgid "read rtc time"
msgstr "lezen van hardwareklok"

#: sys-utils/rtcwake.c:150
msgid "read system time"
msgstr "lezen van systeemtijd"

#: sys-utils/rtcwake.c:168
msgid "convert rtc time"
msgstr "omzetten van hardwarekloktijd"

#: sys-utils/rtcwake.c:228
msgid "set rtc alarm"
msgstr "zetten van de wekker"

#: sys-utils/rtcwake.c:232
msgid "enable rtc alarm"
msgstr "inschakelen van de wekker"

#: sys-utils/rtcwake.c:236
msgid "set rtc wake alarm"
msgstr "zetten van de wekker"

#: sys-utils/rtcwake.c:353
#, c-format
msgid "%s: unrecognized suspend state '%s'\n"
msgstr "%s: onbekende slaaptoestand '%s'\n"

#: sys-utils/rtcwake.c:366
#, c-format
msgid "%s: illegal interval %s seconds\n"
msgstr "%s: ongeldig interval: %s seconden\n"

#: sys-utils/rtcwake.c:380
#, c-format
msgid "%s: illegal time_t value %s\n"
msgstr "%s: ongeldige waarde %s voor ontwakingstijdstip\n"

#: sys-utils/rtcwake.c:396
#, c-format
msgid "%s: version %s\n"
msgstr "%s: versie %s\n"

#: sys-utils/rtcwake.c:409
#, c-format
msgid "%s: assuming RTC uses UTC ...\n"
msgstr "%s: aangenomen wordt dat de hardwareklok UTC bevat...\n"

#: sys-utils/rtcwake.c:414
#, c-format
msgid "Using UTC time.\n"
msgstr "UTC wordt gebruikt.\n"

#: sys-utils/rtcwake.c:415
#, c-format
msgid "Using local time.\n"
msgstr "Lokale tijd wordt gebruikt.\n"

#: sys-utils/rtcwake.c:418
#, c-format
msgid "%s: must provide wake time\n"
msgstr "%s: u dient een wektijd op te geven, via '-s' of '-t'\n"

#: sys-utils/rtcwake.c:428
msgid "malloc() failed"
msgstr "onvoldoende geheugen beschikbaar"

#: sys-utils/rtcwake.c:440
#, c-format
msgid "%s: %s not enabled for wakeup events\n"
msgstr "%s: wekgebeurtenissen voor %s zijn niet ingeschakeld\n"

#: sys-utils/rtcwake.c:460
#, c-format
msgid "alarm %ld, sys_time %ld, rtc_time %ld, seconds %u\n"
msgstr "wektijdstip %ld, systeemtijd %ld, hardwarekloktijd %ld, seconden %u\n"

#: sys-utils/rtcwake.c:465
#, c-format
msgid "%s: time doesn't go backward to %s\n"
msgstr "%s: tijd loopt niet achteruit naar %s\n"

#: sys-utils/rtcwake.c:476
#, c-format
msgid "%s: wakeup from \"%s\" using %s at %s\n"
msgstr "%s: ontwaking uit '%s' via %s op %s\n"

#: sys-utils/rtcwake.c:484
#, c-format
msgid "suspend mode: no; leaving\n"
msgstr "slaapmodus: nee -- gestopt\n"

#: sys-utils/rtcwake.c:493
#, c-format
msgid "suspend mode: off; executing %s\n"
msgstr "slaapmodus: uit -- uitvoeren van %s\n"

#: sys-utils/rtcwake.c:503
#, c-format
msgid "%s: unable to execute %s: %s\n"
msgstr "%s: kan '%s' niet uitvoeren: %s\n"

#: sys-utils/rtcwake.c:512
#, c-format
msgid "suspend mode: on; reading rtc\n"
msgstr "slaapmodus: aan -- lezen van hardwareklok\n"

#: sys-utils/rtcwake.c:518
msgid "rtc read"
msgstr "lezen van hardwareklok"

#: sys-utils/rtcwake.c:529
#, c-format
msgid "suspend mode: disable; disabling alarm\n"
msgstr "slaapmodus: uitgeschakeld -- wekker wordt uitgeschakeld\n"

#: sys-utils/rtcwake.c:532
#, c-format
msgid "suspend mode: %s; suspending system\n"
msgstr "slaapmodus: %s -- de computer gaat slapen\n"

#: sys-utils/rtcwake.c:538
msgid "disable rtc alarm interrupt"
msgstr "uitschakelen van hardwareklok-interrupt"

#: sys-utils/setarch.c:50
#, c-format
msgid "Switching on %s.\n"
msgstr "Aanzetten van %s.\n"

#: sys-utils/setarch.c:113
#, c-format
msgid ""
"Usage: %s%s [options] [program [program arguments]]\n"
"\n"
"Options:\n"
msgstr ""
"Gebruik:  %s%s [opties] [programma [programma-argumenten]]\n"
"\n"
"Opties:\n"

#: sys-utils/setarch.c:117
#, c-format
msgid ""
" -h, --help               displays this help text\n"
" -v, --verbose            says what options are being switched on\n"
" -R, --addr-no-randomize  disables randomization of the virtual address space\n"
" -F, --fdpic-funcptrs     makes function pointers point to descriptors\n"
" -Z, --mmap-page-zero     turns on MMAP_PAGE_ZERO\n"
" -L, --addr-compat-layout changes the way virtual memory is allocated\n"
" -X, --read-implies-exec  turns on READ_IMPLIES_EXEC\n"
" -B, --32bit              turns on ADDR_LIMIT_32BIT\n"
" -I, --short-inode        turns on SHORT_INODE\n"
" -S, --whole-seconds      turns on WHOLE_SECONDS\n"
" -T, --sticky-timeouts    turns on STICKY_TIMEOUTS\n"
" -3, --3gb                limits the used address space to a maximum of 3 GB\n"
"     --4gb                ignored (for backward compatibility only)\n"
msgstr ""
" -h, --help                deze hulptekst tonen\n"
" -v, --verbose             melden welke opties ingeschakeld worden\n"
" -F, --fdpic-funcptrs      functiepointers naar descriptors laten wijzen\n"
" -B, --32bit               ADDR_LIMIT_32BIT inschakelen\n"
" -I, --short-inode         SHORT_INODE inschakelen\n"
" -L, --addr-compat-layout  virtueel geheugen op andere manier toewijzen\n"
" -R, --addr-no-randomize   virtuele adresruimte niet husselen\n"
" -S, --whole-seconds       WHOLE_SECONDS inschakelen\n"
" -T, --sticky-timeouts     STICKY_TIMEOUTS inschakelen\n"
" -X, --read-implies-exec   READ_IMPLIES_EXEC inschakelen\n"
" -Z, --mmap-page-zero      MMAP_PAGE_ZERO inschakelen\n"
" -3, --3gb                 gebruikte adresruimte tot 3 GB beperken\n"
"     --4gb                 (genegeerd, slechts herkend voor compatibiliteit)\n"

#: sys-utils/setarch.c:131
#, c-format
msgid ""
"\n"
"For more information see setarch(8).\n"
msgstr ""
"\n"
"Voor meer informatie zie setarch(8).\n"

#: sys-utils/setarch.c:143
#, c-format
msgid ""
"%s: %s\n"
"Try `%s --help' for more information.\n"
msgstr ""
"%s: %s\n"
"Typ '%s --help' voor meer informatie.\n"

#: sys-utils/setarch.c:215 sys-utils/setarch.c:231
#, c-format
msgid "%s: Unrecognized architecture"
msgstr "%s: Onbekende architectuur"

#: sys-utils/setarch.c:249 sys-utils/setarch.c:256
msgid "Not enough arguments"
msgstr "Te weinig argumenten"

#: sys-utils/setarch.c:265 sys-utils/setarch.c:318
#, c-format
msgid "Failed to set personality to %s"
msgstr "Instellen van systeemeigenschappen voor %s is mislukt"

#: sys-utils/setsid.c:26
#, c-format
msgid "usage: %s program [arg ...]\n"
msgstr "Gebruik:  %s programma [argument ...]\n"

#: sys-utils/tunelp.c:75
#, c-format
msgid ""
"Usage: %s <device> [ -i <IRQ> | -t <TIME> | -c <CHARS> | -w <WAIT> | \n"
"          -a [on|off] | -o [on|off] | -C [on|off] | -q [on|off] | -s | \n"
"          -T [on|off] ]\n"
msgstr ""
"Gebruik:  %s <apparaat> [ -c <aantal_pogingen_alvorens_te_slapen> |\n"
"          -t <slaaptijd> | -w <strobe_wachttijd> | -i <IRQ> | -a [on|off] |\n"
"          -C [on|off] | -o [on|off] | -q [on|off] | -s | -T [on|off] ]\n"

#: sys-utils/tunelp.c:91
msgid "malloc error"
msgstr "onvoldoende geheugen beschikbaar"

#: sys-utils/tunelp.c:103
#, c-format
msgid "%s: bad value\n"
msgstr "%s: ongeldige waarde\n"

#: sys-utils/tunelp.c:242
#, c-format
msgid "%s: %s not an lp device.\n"
msgstr "%s: %s is geen printerapparaat\n"

#: sys-utils/tunelp.c:259
msgid "LPGETSTATUS error"
msgstr "ioctl(LPGETSTATUS) is mislukt"

#: sys-utils/tunelp.c:263
#, c-format
msgid "%s status is %d"
msgstr "status van %s: %d"

#: sys-utils/tunelp.c:264
#, c-format
msgid ", busy"
msgstr ", bezig"

#: sys-utils/tunelp.c:265
#, c-format
msgid ", ready"
msgstr ", gereed"

#: sys-utils/tunelp.c:266
#, c-format
msgid ", out of paper"
msgstr ", papier is op"

#: sys-utils/tunelp.c:267
#, c-format
msgid ", on-line"
msgstr ", staat aan"

#: sys-utils/tunelp.c:268
#, c-format
msgid ", error"
msgstr ", fout"

#: sys-utils/tunelp.c:274
msgid "tunelp: ioctl failed"
msgstr "tunelp: ioctl() is mislukt"

#: sys-utils/tunelp.c:285
msgid "LPGETIRQ error"
msgstr "ioctl(LPGETIRQ) is mislukt"

#: sys-utils/tunelp.c:291
#, c-format
msgid "%s using IRQ %d\n"
msgstr "%s gebruikt IRQ %d\n"

#: sys-utils/tunelp.c:293
#, c-format
msgid "%s using polling\n"
msgstr "%s wordt actief gepolst\n"

#: sys-utils/unshare.c:57
#, c-format
msgid "Usage: %s [options] <program> [args...]\n"
msgstr "Gebruik:  %s [optie...] <programma> [argument...]\n"

#: sys-utils/unshare.c:60
msgid ""
"Run program with some namespaces unshared from parent\n"
"\n"
"  -h, --help        usage information (this)\n"
"  -m, --mount       unshare mounts namespace\n"
"  -u, --uts         unshare UTS namespace (hostname etc)\n"
"  -i, --ipc         unshare System V IPC namespace\n"
"  -n, --net         unshare network namespace\n"
msgstr ""
"Voert een programma uit met sommige naamsruimten ontkoppeld van moederproces.\n"
"\n"
"  -h, --help     deze hulptekst tonen\n"
"  -i, --ipc      'System V IPC'-naamsruimte niet delen\n"
"  -m, --mount    aankoppelingennaamsruimte niet delen\n"
"  -n, --net      netwerknaamsruimte niet delen\n"
"  -u, --uts      UTS-naamsruimte niet delen (hostnaam en dergelijke)\n"

#: sys-utils/unshare.c:67
#, c-format
msgid ""
"\n"
"For more information see unshare(1).\n"
msgstr ""
"\n"
"Voor meer informatie zie unshare(1).\n"

#: sys-utils/unshare.c:114
msgid "unshare failed"
msgstr "unshare() is mislukt"

#: sys-utils/unshare.c:118
msgid "cannot set group id"
msgstr "kan groeps-ID niet instellen"

#: sys-utils/unshare.c:121
msgid "cannot set user id"
msgstr "kan gebruikers-ID niet instellen"

#: sys-utils/unshare.c:125
#, c-format
msgid "exec %s failed"
msgstr "uitvoeren van '%s' is mislukt"

#: text-utils/col.c:154
#, c-format
msgid "col: bad -l argument %s.\n"
msgstr "col: ongeldig argument '%s' van '-l'\n"

#: text-utils/col.c:544
#, c-format
msgid "usage: col [-bfpx] [-l nline]\n"
msgstr "Gebruik:  col [-bfpx] [-l te_bufferen_aantal_regels]\n"

#: text-utils/col.c:550
#, c-format
msgid "col: write error.\n"
msgstr "col: schrijffout\n"

#: text-utils/col.c:557
#, c-format
msgid "col: warning: can't back up %s.\n"
msgstr "col: Waarschuwing: kan niet terug %s.\n"

#: text-utils/col.c:558
msgid "past first line"
msgstr "tot vóór eerste regel"

#: text-utils/col.c:558
msgid "-- line already flushed"
msgstr "-- regel is al doorgespoeld"

#: text-utils/colcrt.c:97
#, c-format
msgid "usage: %s [ - ] [ -2 ] [ file ... ]\n"
msgstr "Gebruik:  %s [-] [-2] [BESTAND...]\n"

#: text-utils/column.c:297
msgid "line too long"
msgstr "regel is te lang"

#: text-utils/column.c:374
#, c-format
msgid "usage: column [-tx] [-c columns] [file ...]\n"
msgstr "Gebruik:  column [-c aantal_kolommen] [-t] [-x] [bestand ...]\n"

#: text-utils/hexsyntax.c:82
#, c-format
msgid "hexdump: bad length value.\n"
msgstr "hexdump: ongeldige waarde voor te_interpreteren_aantal\n"

#: text-utils/hexsyntax.c:93
#, c-format
msgid "hexdump: bad skip value.\n"
msgstr "hexdump: ongeldige waarde voor over_te_slaan_aantal\n"

#: text-utils/hexsyntax.c:131
#, c-format
msgid "hexdump: [-bcCdovx] [-e fmt] [-f fmt_file] [-n length] [-s skip] [file ...]\n"
msgstr ""
"Gebruik:  hexdump [-bcCdovx] [-e opmaaktekenreeks] [-f opmaakbestand]\n"
"          [-n te_interpreteren_aantal] [-s over_te_slaan_aantal] [bestand ...]\n"

#: text-utils/more.c:258
#, c-format
msgid "usage: %s [-dflpcsu] [+linenum | +/pattern] name1 name2 ...\n"
msgstr "Gebruik:  %s [-cdflpsu] [+regelnummer | +/patroon] naam1 naam2 ...\n"

#: text-utils/more.c:290
#, c-format
msgid "failed to initialize line buffer\n"
msgstr "initialiseren van regelbuffer is mislukt\n"

#: text-utils/more.c:485
#, c-format
msgid "%s: unknown option \"-%c\"\n"
msgstr "%s: onbekende optie '-%c'\n"

#: text-utils/more.c:517
#, c-format
msgid ""
"\n"
"*** %s: directory ***\n"
"\n"
msgstr ""
"\n"
"*** %s: map ***\n"
"\n"

#: text-utils/more.c:561
#, c-format
msgid ""
"\n"
"******** %s: Not a text file ********\n"
"\n"
msgstr ""
"\n"
"******** %s: Geen tekstbestand ********\n"
"\n"

#: text-utils/more.c:664
#, c-format
msgid "[Use q or Q to quit]"
msgstr "[Gebruik Q of q om af te sluiten]"

#: text-utils/more.c:756
#, c-format
msgid "--More--"
msgstr "--Meer--"

#: text-utils/more.c:758
#, c-format
msgid "(Next file: %s)"
msgstr "(Volgend bestand: %s)"

#: text-utils/more.c:763
#, c-format
msgid "[Press space to continue, 'q' to quit.]"
msgstr "[Druk op de spatiebalk om verder te gaan; 'q' om af te sluiten.]"

#: text-utils/more.c:1206
#, c-format
msgid "...back %d pages"
msgstr "...%d pagina's terug"

#: text-utils/more.c:1208
msgid "...back 1 page"
msgstr "...1 pagina terug"

#: text-utils/more.c:1251
msgid "...skipping one line"
msgstr "...1 regel overslaand"

#: text-utils/more.c:1253
#, c-format
msgid "...skipping %d lines"
msgstr "...%d regels overslaand"

#: text-utils/more.c:1290
msgid ""
"\n"
"***Back***\n"
"\n"
msgstr ""
"\n"
"***Terug***\n"
"\n"

#: text-utils/more.c:1328
msgid ""
"\n"
"Most commands optionally preceded by integer argument k.  Defaults in brackets.\n"
"Star (*) indicates argument becomes new default.\n"
msgstr ""
"\n"
"Aan de meeste opdrachten kan een geheel getal (k) voorafgaan.\n"
"De standaardwaarde staat tussen rechte haken.  Een ster (*)\n"
"geeft aan dat de gegeven k de nieuwe standaardwaarde wordt.\n"

#: text-utils/more.c:1335
msgid ""
"<space>                 Display next k lines of text [current screen size]\n"
"z                       Display next k lines of text [current screen size]*\n"
"<return>                Display next k lines of text [1]*\n"
"d or ctrl-D             Scroll k lines [current scroll size, initially 11]*\n"
"q or Q or <interrupt>   Exit from more\n"
"s                       Skip forward k lines of text [1]\n"
"f                       Skip forward k screenfuls of text [1]\n"
"b or ctrl-B             Skip backwards k screenfuls of text [1]\n"
"'                       Go to place where previous search started\n"
"=                       Display current line number\n"
"/<regular expression>   Search for kth occurrence of regular expression [1]\n"
"n                       Search for kth occurrence of last r.e [1]\n"
"!<cmd> or :!<cmd>       Execute <cmd> in a subshell\n"
"v                       Start up /usr/bin/vi at current line\n"
"ctrl-L                  Redraw screen\n"
":n                      Go to kth next file [1]\n"
":p                      Go to kth previous file [1]\n"
":f                      Display current file name and line number\n"
".                       Repeat previous command\n"
msgstr ""
"<spatie>            De volgende k regels tonen  [huidige schermgrootte]\n"
"z                   De volgende k regels tonen  [huidige schermgrootte]*\n"
"<enter>             De volgende k regels tonen  [1]*\n"
"d of ctrl-D         De tekst k regels scrollen  [11]*\n"
"q of Q of ctrl-C    Afsluiten\n"
"s                   Een scherm verder en k regels overslaan  [1]\n"
"f                   Een scherm verder en k schermen overslaan  [1]\n"
"b of ctrl-B         Een scherm terug en k schermen overslaan  [1]\n"
"=                   Huidige regelnummer tonen\n"
"/<reguliere exp.>   De k-de overeenkomst van deze expressie zoeken  [1]\n"
"n                   De k-de overeenkomst van vorige expressie zoeken  [1]\n"
"'                   Terug naar waar de vorige zoekopdracht startte\n"
"!<cmd> of :!<cmd>   De opdracht <cmd> in een sub-shell uitvoeren\n"
"v                   Editor starten (beginnend op de huidige regel)\n"
"ctrl-L              Het scherm verversen (opnieuw tekenen)\n"
":n                  Naar het k-de volgende bestand  [1]\n"
":p                  Naar het k-de vorige bestand  [1]\n"
":f                  Huidige bestandsnaam en regelnummer tonen\n"
".                   De vorige opdracht herhalen\n"

#: text-utils/more.c:1404 text-utils/more.c:1409
#, c-format
msgid "[Press 'h' for instructions.]"
msgstr "[Druk op 'h' voor instructies.]"

#: text-utils/more.c:1443
#, c-format
msgid "\"%s\" line %d"
msgstr "\"%s\"  regel %d"

#: text-utils/more.c:1445
#, c-format
msgid "[Not a file] line %d"
msgstr "[Geen bestand]  regel %d"

#: text-utils/more.c:1529
msgid "  Overflow\n"
msgstr "  Overloop\n"

#: text-utils/more.c:1576
msgid "...skipping\n"
msgstr "...overslaand\n"

#: text-utils/more.c:1605
msgid "Regular expression botch"
msgstr "Reguliere expressie is verknoeid"

#: text-utils/more.c:1613
msgid ""
"\n"
"Pattern not found\n"
msgstr ""
"\n"
"Patroon niet gevonden\n"

#: text-utils/more.c:1616 text-utils/pg.c:1127 text-utils/pg.c:1278
msgid "Pattern not found"
msgstr "Patroon niet gevonden"

#: text-utils/more.c:1677
msgid "can't fork\n"
msgstr "kan geen nieuw proces starten\n"

#: text-utils/more.c:1716
msgid ""
"\n"
"...Skipping "
msgstr ""
"\n"
"...Verder "

#: text-utils/more.c:1720
msgid "...Skipping to file "
msgstr "...Verder naar bestand "

#: text-utils/more.c:1722
msgid "...Skipping back to file "
msgstr "...Terug naar bestand "

#: text-utils/more.c:2000
msgid "Line too long"
msgstr "Regel is te lang"

#: text-utils/more.c:2043
msgid "No previous command to substitute for"
msgstr "Geen eerdere opdracht"

#: text-utils/odsyntax.c:130
#, c-format
msgid "od: od(1) has been deprecated for hexdump(1).\n"
msgstr "od: od(1) wordt afgeraden; gebruik hexdump(1).\n"

#: text-utils/odsyntax.c:133
#, c-format
msgid "od: hexdump(1) compatibility doesn't support the -%c option%s\n"
msgstr "od: hexdump(1)-compatibiliteit ondersteunt de optie '-%c' niet%s\n"

#: text-utils/odsyntax.c:134
msgid "; see strings(1)."
msgstr "; zie strings(1)."

#: text-utils/parse.c:63
#, c-format
msgid "hexdump: can't read %s.\n"
msgstr "hexdump: kan %s niet lezen\n"

#: text-utils/parse.c:68
#, c-format
msgid "hexdump: line too long.\n"
msgstr "hexdump: regel is te lang\n"

#: text-utils/parse.c:401
#, c-format
msgid "hexdump: byte count with multiple conversion characters.\n"
msgstr "hexdump: byte-aantal met meerdere conversietekens\n"

#: text-utils/parse.c:483
#, c-format
msgid "hexdump: bad byte count for conversion character %s.\n"
msgstr "hexdump: ongeldig byte-aantal voor conversieteken %s\n"

#: text-utils/parse.c:490
#, c-format
msgid "hexdump: %%s requires a precision or a byte count.\n"
msgstr "hexdump: %%s vereist een precisie of een byte-aantal\n"

#: text-utils/parse.c:496
#, c-format
msgid "hexdump: bad format {%s}\n"
msgstr "hexdump: ongeldige opmaak {%s}\n"

#: text-utils/parse.c:502
#, c-format
msgid "hexdump: bad conversion character %%%s.\n"
msgstr "hexdump: ongeldig conversieteken %%%s\n"

#: text-utils/pg.c:145
msgid ""
"All rights reserved.\n"
"-------------------------------------------------------\n"
"  h                       this screen\n"
"  q or Q                  quit program\n"
"  <newline>               next page\n"
"  f                       skip a page forward\n"
"  d or ^D                 next halfpage\n"
"  l                       next line\n"
"  $                       last page\n"
"  /regex/                 search forward for regex\n"
"  ?regex? or ^regex^      search backward for regex\n"
"  . or ^L                 redraw screen\n"
"  w or z                  set page size and go to next page\n"
"  s filename              save current file to filename\n"
"  !command                shell escape\n"
"  p                       go to previous file\n"
"  n                       go to next file\n"
"\n"
"Many commands accept preceding numbers, for example:\n"
"+1<newline> (next page); -1<newline> (previous page); 1<newline> (first page).\n"
"\n"
"See pg(1) for more information.\n"
"-------------------------------------------------------\n"
msgstr ""

#: text-utils/pg.c:223
msgid "Out of memory\n"
msgstr "Onvoldoende geheugen beschikbaar\n"

#: text-utils/pg.c:236
#, c-format
msgid "%s: Usage: %s [-number] [-p string] [-cefnrs] [+line] [+/pattern/] [files]\n"
msgstr ""
"%s: Gebruik:  %s [-aantal_regels_per_pagina] [-p te_gebruiken_prompt]\n"
"              [-cefnrs] [+regelnummer] [+/patroon/] [bestand ...]\n"

#: text-utils/pg.c:245
#, c-format
msgid "%s: option requires an argument -- %s\n"
msgstr "%s: optie vereist een argument -- %s\n"

#: text-utils/pg.c:253
#, c-format
msgid "%s: illegal option -- %s\n"
msgstr "%s: ongeldige optie -- %s\n"

#: text-utils/pg.c:370
msgid "...skipping forward\n"
msgstr "...verder...\n"

#: text-utils/pg.c:372
msgid "...skipping backward\n"
msgstr "...terug...\n"

#: text-utils/pg.c:394
msgid "No next file"
msgstr "Geen volgend bestand"

#: text-utils/pg.c:398
msgid "No previous file"
msgstr "Geen voorgaand bestand"

#: text-utils/pg.c:931
#, c-format
msgid "%s: Read error from %s file\n"
msgstr "%s: Leesfout in bestand %s\n"

#: text-utils/pg.c:937
#, c-format
msgid "%s: Unexpected EOF in %s file\n"
msgstr "%s: Onverwachte EOF in bestand %s\n"

#: text-utils/pg.c:940
#, c-format
msgid "%s: Unknown error in %s file\n"
msgstr "%s: Onbekende fout in bestand %s\n"

#: text-utils/pg.c:1035
#, c-format
msgid "%s: Cannot create tempfile\n"
msgstr "%s: Kan geen tijdelijk bestand maken\n"

#: text-utils/pg.c:1044 text-utils/pg.c:1219 text-utils/pg.c:1246
msgid "RE error: "
msgstr "Fout in reguliere expressie: "

#: text-utils/pg.c:1201
msgid "(EOF)"
msgstr "(EOF)"

#: text-utils/pg.c:1227 text-utils/pg.c:1254
msgid "No remembered search string"
msgstr "Geen eerdere zoektekst"

#: text-utils/pg.c:1310
msgid "Cannot open "
msgstr "Kan deze niet openen: "

#: text-utils/pg.c:1358
msgid "saved"
msgstr "opgeslagen"

#: text-utils/pg.c:1465
msgid ": !command not allowed in rflag mode.\n"
msgstr ": !opdracht is niet toegestaan in beperkte modus.\n"

#: text-utils/pg.c:1497
msgid "fork() failed, try again later\n"
msgstr "fork() is mislukt; probeer het later opnieuw\n"

#: text-utils/pg.c:1705
msgid "(Next file: "
msgstr "(Volgende bestand: "

#: text-utils/rev.c:113
msgid "unable to allocate bufferspace"
msgstr "kan geen bufferruimte reserveren"

#: text-utils/rev.c:143
#, c-format
msgid "usage: rev [file ...]\n"
msgstr "Gebruik:  rev [bestand ...]\n"

#: text-utils/tailf.c:58 text-utils/tailf.c:93
#, c-format
msgid "cannot open \"%s\" for read"
msgstr "kan '%s' niet openen voor lezen"

#: text-utils/tailf.c:96 text-utils/tailf.c:215
#, c-format
msgid "cannot stat \"%s\""
msgstr "kan status van '%s' niet opvragen"

#: text-utils/tailf.c:109
#, c-format
msgid "incomplete write to \"%s\" (written %zd, expected %zd)\n"
msgstr "onvolledige schrijfoperatie naar '%s' (%zd geschreven, %zd verwacht)\n"

#: text-utils/tailf.c:147
#, c-format
msgid "%s: cannot add inotify watch (limit of inotify watches was reached)."
msgstr "%s: kan geen 'inotify'-wachter toevoegen (maximum aantal is bereikt)"

#: text-utils/tailf.c:151
#, c-format
msgid "%s: cannot add inotify watch."
msgstr "%s: kan geen 'inotify'-wachter toevoegen"

#: text-utils/tailf.c:160
#, c-format
msgid "%s: cannot read inotify events"
msgstr "%s: kan geen 'inotify'-gebeurtenissen lezen"

#: text-utils/tailf.c:199 text-utils/tailf.c:203
msgid "invalid number of lines"
msgstr "ongeldig aantal regels"

#: text-utils/tailf.c:210
msgid "usage: tailf [-n N | -N] logfile"
msgstr "Gebruik:  tailf [-n <getal> | -<getal>]  logbestand"

#: text-utils/ul.c:141
#, c-format
msgid "usage: %s [ -i ] [ -tTerm ] file...\n"
msgstr "Gebruik:  %s [-i] [-t terminaltype] bestand...\n"

#: text-utils/ul.c:152
#, c-format
msgid "trouble reading terminfo"
msgstr "problemen bij lezen van terminfo"

#: text-utils/ul.c:242
#, c-format
msgid "Unknown escape sequence in input: %o, %o\n"
msgstr "Onbekende stuurcode in invoer: %o, %o\n"

#: text-utils/ul.c:425
#, c-format
msgid "Unable to allocate buffer.\n"
msgstr "Reserveren van buffer is mislukt\n"

#: text-utils/ul.c:586
#, c-format
msgid "Input line too long.\n"
msgstr "Invoerregel is te lang\n"

#: text-utils/ul.c:599
#, c-format
msgid "Out of memory when growing buffer.\n"
msgstr "Onvoldoende geheugen beschikbaar tijdens groeien van buffer\n"

#~ msgid "error running programme: \"%s\"\n"
#~ msgstr "fout bij uitvoeren van programma: \"%s\"\n"

#~ msgid "invalid offset '%s' value specified"
#~ msgstr "ongeldige positiewaarde '%s' opgegeven"

# Met een hoofdletter want komt aan begin van zin, en voor "beleid" of "prioriteit".
#~ msgid "current"
#~ msgstr "Huidig(e)"

# Met een hoofdletter want komt aan begin van zin, en voor "beleid" of "prioriteit".
#~ msgid "new"
#~ msgstr "Nieuw(e)"

#~ msgid "Linux ext2"
#~ msgstr "Linux ext2"

#~ msgid "Linux ext3"
#~ msgstr "Linux ext3"

#~ msgid "Linux XFS"
#~ msgstr "Linux XFS"

#~ msgid "Linux JFS"
#~ msgstr "Linux JFS"

#~ msgid "Linux ReiserFS"
#~ msgstr "Linux ReiserFS"

#~ msgid "OS/2 HPFS"
#~ msgstr "OS/2 HPFS"

#~ msgid "OS/2 IFS"
#~ msgstr "OS/2 IFS"

#~ msgid "NTFS"
#~ msgstr "NTFS"

#~ msgid "mount: no medium found on %s ...trying again\n"
#~ msgstr "mount: geen medium gevonden op %s; ... nieuwe poging\n"

#~ msgid "execvp failed"
#~ msgstr "execvp() is mislukt"

#~ msgid "usage : %s -asmq -tclup \n"
#~ msgstr "Gebruik:  %s -asmq -tclup\n"

#~ msgid "\t%s [-s -m -q] -i id\n"
#~ msgstr "          %s [-s] [-m] [-q] -i ID\n"

#~ msgid "\t%s -h for help.\n"
#~ msgstr "          %s -h  (voor hulp)\n"

#~ msgid ""
#~ "Resource Specification:\n"
#~ "\t-m : shared_mem\n"
#~ "\t-q : messages\n"
#~ msgstr ""
#~ "Bronnenkeuze:\n"
#~ "    -m : gedeeld geheugen\n"
#~ "    -q : berichten\n"

#~ msgid ""
#~ "\t-s : semaphores\n"
#~ "\t-a : all (default)\n"
#~ msgstr ""
#~ "    -s : semaforen\n"
#~ "    -a : alle (is standaard)\n"

#~ msgid ""
#~ "Output Format:\n"
#~ "\t-t : time\n"
#~ "\t-p : pid\n"
#~ "\t-c : creator\n"
#~ msgstr ""
#~ "Uitvoerindeling:\n"
#~ "    -t : tijd\n"
#~ "    -p : PID\n"
#~ "    -c : aanmaker\n"

#~ msgid ""
#~ "\t-l : limits\n"
#~ "\t-u : summary\n"
#~ msgstr ""
#~ "    -l : grenzen\n"
#~ "    -u : samenvatting\n"

#~ msgid "error: %s"
#~ msgstr "fout: %s"

#~ msgid "error parse: %s"
#~ msgstr "ontledingsfout: %s"

#~ msgid "error: /sys filesystem is not accessable."
#~ msgstr "fout: het /sys-bestandssysteem is ontoegankelijk"

#~ msgid "error: change working directory to %s."
#~ msgstr "fout: bij wijzigen van huidige werkmap naar %s"

#~ msgid "usage: rdev [ -rv ] [ -o OFFSET ] [ IMAGE [ VALUE [ OFFSET ] ] ]"
#~ msgstr "Gebruik:  rdev [-rv] [-o PLAATS] [AFBEELDING [WAARDE [PLAATS]]]"

#~ msgid "  rdev /dev/fd0  (or rdev /linux, etc.) displays the current ROOT device"
#~ msgstr "  rdev /dev/fd0  (of rdev /linux, enz.)  huidig ROOT-apparaat tonen"

#~ msgid "  rdev /dev/fd0 /dev/hda2         sets ROOT to /dev/hda2"
#~ msgstr "  rdev /dev/fd0 /dev/hda2         ROOT instellen op /dev/hda2"

#~ msgid "  rdev -R /dev/fd0 1              set the ROOTFLAGS (readonly status)"
#~ msgstr "  rdev -R /dev/fd0 1              ROOTFLAGS instellen (alleen-lezenstatus)"

#~ msgid "  rdev -r /dev/fd0 627            set the RAMDISK size"
#~ msgstr "  rdev -r /dev/fd0 627            RAMDISK-grootte instellen"

#~ msgid "  rdev -v /dev/fd0 1              set the bootup VIDEOMODE"
#~ msgstr "  rdev -v /dev/fd0 1              VIDEOMODUS bij opstarten instellen"

#~ msgid "  rdev -o N ...                   use the byte offset N"
#~ msgstr "  rdev -o N ...                   de byteplaats N gebruiken"

#~ msgid "  rootflags ...                   same as rdev -R"
#~ msgstr "  rootflags ...                   is hetzelfde als rdev -R"

#~ msgid "  ramsize ...                     same as rdev -r"
#~ msgstr "  ramsize ...                     is hetzelfde als rdev -r"

#~ msgid "  vidmode ...                     same as rdev -v"
#~ msgstr "  vidmode ...                     is hetzelfde als rdev -v"

#~ msgid "Note: video modes are: -3=Ask, -2=Extended, -1=NormalVga, 1=key1, 2=key2,..."
#~ msgstr ""
#~ "Opmerking: videomodi zijn: -3=vragen, -2=uitgebreid, -1=gewoon,\n"
#~ "                           1=sleutel1, 2=sleutel2, ..."

#~ msgid "      use -R 1 to mount root readonly, -R 0 for read/write."
#~ msgstr ""
#~ "Gebruik '-R 1' om root als alleen-lezen aan te koppelen,\n"
#~ "     of '-R 0' voor lezen-en-schrijven."

#~ msgid "missing comma"
#~ msgstr "komma ontbreekt"

#~ msgid "%s: error: label only with v1 swap area\n"
#~ msgstr "%s: fout: label is alleen mogelijk bij versie-1-wisselgeheugen\n"

#~ msgid "fatal: first page unreadable"
#~ msgstr "fataal: eerste pagina is onleesbaar"

#~ msgid ""
#~ "%s: Device '%s' contains a valid Sun disklabel.\n"
#~ "This probably means creating v0 swap would destroy your partition table.\n"
#~ "No swap was created. If you really want to create v0 swap on that device,\n"
#~ "use the -f option to force it.\n"
#~ msgstr ""
#~ "%s: Apparaat '%s' bevat een geldig Sun-schijflabel.\n"
#~ "Dit betekent waarschijnlijk dat het maken van versie-0-wisselgeheugen\n"
#~ "uw partitietabel zou vernielen.  Er is geen wisselgeheugen gemaakt.\n"
#~ "Als u echt versie-0-wisselgeheugen op dit apparaat wilt maken,\n"
#~ "kunt u de optie '-f' gebruiken om het af te dwingen.\n"

#~ msgid ""
#~ "Usage: fdisk [-b SSZ] [-u] DISK     Change partition table\n"
#~ "       fdisk -l [-b SSZ] [-u] DISK  List partition table(s)\n"
#~ "       fdisk -s PARTITION           Give partition size(s) in blocks\n"
#~ "       fdisk -v                     Give fdisk version\n"
#~ "Here DISK is something like /dev/hdb or /dev/sda\n"
#~ "and PARTITION is something like /dev/hda7\n"
#~ "-u: give Start and End in sector (instead of cylinder) units\n"
#~ "-b 2048: (for certain MO disks) use 2048-byte sectors\n"
#~ msgstr ""
#~ "Gebruik:  fdisk [-b SECTORGROOTTE] [-u] APPARAAT       partitietabel wijzigen\n"
#~ "          fdisk -l [-b SECTORGROOTTE] [-u] APPARAAT    partitietabel weergeven\n"
#~ "          fdisk -s PARTITIE    partitiegrootte in blokken weergeven\n"
#~ "          fdisk -v             programmaversie tonen\n"
#~ "\n"
#~ "Hier is APPARAAT zoiets als /dev/hda of /dev/sdb,\n"
#~ "en PARTITIE zoiets als /dev/hda7 of /dev/sdb4.\n"
#~ "\n"
#~ "-u        Begin en Einde in sectoreenheden (in plaats van cilindereenheden)\n"
#~ "-b 2048   (voor sommige MO-schijven) 2048-byte sectoren gebruiken\n"

#~ msgid ""
#~ "Usage: fdisk [-l] [-b SSZ] [-u] device\n"
#~ "E.g.: fdisk /dev/hda  (for the first IDE disk)\n"
#~ "  or: fdisk /dev/sdc  (for the third SCSI disk)\n"
#~ "  or: fdisk /dev/eda  (for the first PS/2 ESDI drive)\n"
#~ "  or: fdisk /dev/rd/c0d0  or: fdisk /dev/ida/c0d0  (for RAID devices)\n"
#~ "  ...\n"
#~ msgstr ""
#~ "Gebruik:  fdisk [-l] [-b SECTORGROOTTE] [-u] APPARAAT\n"
#~ "\n"
#~ "Bijvoorbeeld:  fdisk /dev/hda      (voor de eerste IDE-schijf)\n"
#~ "          of:  fdisk /dev/sdc      (voor de derde SCSI-schijf)\n"
#~ "          of:  fdisk /dev/edb      (voor de tweede PS/2-ESDI-schijf)\n"
#~ "          of:  fdisk /dev/rd/c0d0  (voor RAID-apparaten)\n"
#~ "          ...\n"

#~ msgid ""
#~ "\n"
#~ "The number of cylinders for this disk is set to %d.\n"
#~ "There is nothing wrong with that, but this is larger than 1024,\n"
#~ "and could in certain setups cause problems with:\n"
#~ "1) software that runs at boot time (e.g., old versions of LILO)\n"
#~ "2) booting and partitioning software from other OSs\n"
#~ "   (e.g., DOS FDISK, OS/2 FDISK)\n"
#~ msgstr ""
#~ "\n"
#~ "Het aantal cilinders van deze schijf is ingesteld op %d.\n"
#~ "Hier is niets mis mee, maar het is groter dan 1024 en kan\n"
#~ "bij bepaalde instellingen problemen veroorzaken met:\n"
#~ "1) opstartsoftware (bijvoorbeeld oude versies van LILO),\n"
#~ "2) partitioneringssoftware van andere besturingssytemen\n"
#~ "   (bijvoorbeeld DOS FDISK of OS/2 FDISK).\n"

#~ msgid "# partition table of %s\n"
#~ msgstr "# Partitietabel van %s\n"

#~ msgid ""
#~ "unit: sectors\n"
#~ "\n"
#~ msgstr ""
#~ "eenheid: sectoren \n"
#~ "\n"

#~ msgid " start=%9lu"
#~ msgstr " begin=%9lu"

#~ msgid ", size=%9lu"
#~ msgstr ", grootte=%9lu"

#~ msgid ", bootable"
#~ msgstr ", opstartbaar"

#~ msgid "namei: unable to get current directory - %s\n"
#~ msgstr "namei: bepalen van huidige map is mislukt -- %s\n"

#~ msgid "namei: unable to chdir to %s - %s (%d)\n"
#~ msgstr "namei: naar map %s gaan is mislukt -- %s (%d)\n"

#~ msgid "namei: could not chdir to root!\n"
#~ msgstr "namei: kan niet naar hoofdmap gaan!\n"

#~ msgid "namei: could not stat root!\n"
#~ msgstr "namei: kan status van hoofdmap niet bepalen!\n"

#~ msgid "namei: buf overflow\n"
#~ msgstr "namei: bufferoverloop\n"

#~ msgid " ? could not chdir into %s - %s (%d)\n"
#~ msgstr "??? naar map %s gaan is mislukt -- %s (%d)\n"

#~ msgid " ? problems reading symlink %s - %s (%d)\n"
#~ msgstr "??? problemen bij lezen van symbolische koppeling %s -- %s (%d)\n"

#~ msgid "  *** EXCEEDED UNIX LIMIT OF SYMLINKS ***\n"
#~ msgstr "  *** MAXIMUM AANTAL SYMBOLISCHE KOPPELINGEN IS OVERSCHREDEN ***\n"

#~ msgid "namei: unknown file type 0%06o on file %s\n"
#~ msgstr "namei: onbekende bestandssoort 0%06o bij bestand %s\n"

#~ msgid "mount: going to mount %s by %s\n"
#~ msgstr "mount: aankoppelen van %s via %s\n"

#~ msgid "mount: no LABEL=, no UUID=, going to mount %s by path\n"
#~ msgstr "mount: geen LABEL= noch UUID=; aankoppelen van %s via pad\n"

#~ msgid "%s: cannot fork: %s\n"
#~ msgstr "%s: Kan geen nieuw proces starten: %s\n"

#~ msgid "%s: waitpid: %s\n"
#~ msgstr "%s: waitpid(): %s\n"

#~ msgid "%s: cannot stat %s: %s\n"
#~ msgstr "%s: kan status van %s niet opvragen: %s\n"

#~ msgid "could not umount %s - trying %s instead\n"
#~ msgstr "kan %s niet ontkoppelen; nu poging met %s...\n"