# Vietnamese translation for BASH (Bourne Again SHell). # Copyright © 2012 Free Software Foundation, Inc. # This file is distributed under the same license as the bash package. # Clytie Siddall , 2008, 2009, 2010. # Trần Ngọc Quân , 2012. # Nguyễn Thái Ngọc Duy , 2012. # msgid "" msgstr "" "Project-Id-Version: bash-4.2\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2011-01-28 22:09-0500\n" "PO-Revision-Date: 2012-09-11 07:29+0700\n" "Last-Translator: Trần Ngọc Quân \n" "Language-Team: Vietnamese \n" "Language: vi\n" "X-Bugs: Report translation errors to the Language-Team address.\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=1; plural=0;\n" "X-Generator: LocFactoryEditor 1.8\n" "X-Poedit-SourceCharset: UTF-8\n" #: arrayfunc.c:50 msgid "bad array subscript" msgstr "chỉ mục mảng sai" #: arrayfunc.c:313 builtins/declare.def:487 #, c-format msgid "%s: cannot convert indexed to associative array" msgstr "%s: không thể chuyển đổi mảng kiểu chỉ số sang mảng kết hợp" #: arrayfunc.c:480 #, c-format msgid "%s: invalid associative array key" msgstr "%s: khoá mảng liên kết không hợp lệ" #: arrayfunc.c:482 #, c-format msgid "%s: cannot assign to non-numeric index" msgstr "%s: không thể gán cho chỉ số không thuộc kiểu số" #: arrayfunc.c:518 #, c-format msgid "%s: %s: must use subscript when assigning associative array" msgstr "%s: %s: phải sử dụng chữ thấp khi gán mảng kết hợp" #: bashhist.c:387 #, c-format msgid "%s: cannot create: %s" msgstr "%s: không thể tạo: %s" #: bashline.c:3498 msgid "bash_execute_unix_command: cannot find keymap for command" msgstr "bash_execute_unix_command: không tìm thấy ánh xạ cho câu lệnh" #: bashline.c:3584 #, c-format msgid "%s: first non-whitespace character is not `\"'" msgstr "%s: ký tự khác khoảng trắng đầu tiên không phải là `\"'" #: bashline.c:3613 #, c-format msgid "no closing `%c' in %s" msgstr "thiếu dấu đóng `%c' trong %s" #: bashline.c:3647 #, c-format msgid "%s: missing colon separator" msgstr "%s: thiếu dấu hai chấm phân cách" #: builtins/alias.def:132 #, c-format msgid "`%s': invalid alias name" msgstr "`%s': tên bí danh không hợp lệ" #: builtins/bind.def:120 builtins/bind.def:123 msgid "line editing not enabled" msgstr "chưa bật sửa đổi dòng" #: builtins/bind.def:206 #, c-format msgid "`%s': invalid keymap name" msgstr "`%s': tên ánh xạ phím không hợp lệ" #: builtins/bind.def:245 #, c-format msgid "%s: cannot read: %s" msgstr "%s: không thể đọc: %s" #: builtins/bind.def:260 #, c-format msgid "`%s': cannot unbind" msgstr "`%s': không thể tháo" #: builtins/bind.def:295 builtins/bind.def:325 #, c-format msgid "`%s': unknown function name" msgstr "`%s': tên hàm không rõ" #: builtins/bind.def:303 #, c-format msgid "%s is not bound to any keys.\n" msgstr "%s không được tổ hợp với phím.\n" #: builtins/bind.def:307 #, c-format msgid "%s can be invoked via " msgstr "%s có thể được gọi thông qua " #: builtins/break.def:77 builtins/break.def:117 msgid "loop count" msgstr "đếm vòng" #: builtins/break.def:137 msgid "only meaningful in a `for', `while', or `until' loop" msgstr "chỉ có nghĩa trong vòng lặp `for', `while' hay `until'" #: builtins/caller.def:133 msgid "" "Returns the context of the current subroutine call.\n" " \n" " Without EXPR, returns " msgstr "" "Trả lại ngữ cảnh của lời gọi thường trình con hiện thời.\n" "\n" " Nếu không có BTHỨC thì trả lại " #: builtins/cd.def:235 msgid "HOME not set" msgstr "Chưa đặt biến môi trường HOME" #: builtins/cd.def:247 msgid "OLDPWD not set" msgstr "Chưa đặt biến môi trường OLDPWD" #: builtins/common.c:101 #, c-format msgid "line %d: " msgstr "dòng %d: " #: builtins/common.c:139 error.c:261 #, c-format msgid "warning: " msgstr "cảnh báo: " #: builtins/common.c:153 #, c-format msgid "%s: usage: " msgstr "%s: sử dụng: " #: builtins/common.c:166 test.c:832 msgid "too many arguments" msgstr "quá nhiều đối số" #: builtins/common.c:191 shell.c:500 shell.c:782 #, c-format msgid "%s: option requires an argument" msgstr "%s: tùy chọn cần một đối số" #: builtins/common.c:198 #, c-format msgid "%s: numeric argument required" msgstr "%s: cần đối số dạng số" #: builtins/common.c:205 #, c-format msgid "%s: not found" msgstr "%s: không tìm thấy" #: builtins/common.c:214 shell.c:795 #, c-format msgid "%s: invalid option" msgstr "%s: tùy chọn không hợp lệ" #: builtins/common.c:221 #, c-format msgid "%s: invalid option name" msgstr "%s: tên tùy chọn không hợp lệ" #: builtins/common.c:228 general.c:231 general.c:236 #, c-format msgid "`%s': not a valid identifier" msgstr "`%s': không phải định danh hợp lệ" #: builtins/common.c:238 msgid "invalid octal number" msgstr "số bát phân không hợp lệ" #: builtins/common.c:240 msgid "invalid hex number" msgstr "số thập lục không hợp lệ" #: builtins/common.c:242 expr.c:1362 msgid "invalid number" msgstr "số không hợp lệ" #: builtins/common.c:250 #, c-format msgid "%s: invalid signal specification" msgstr "%s: sai đặc tả tín hiệu" #: builtins/common.c:257 #, c-format msgid "`%s': not a pid or valid job spec" msgstr "`%s': không phải một pid hoặc đặc tả công việc hợp lệ" #: builtins/common.c:264 error.c:454 #, c-format msgid "%s: readonly variable" msgstr "%s: biến chỉ đọc" #: builtins/common.c:272 #, c-format msgid "%s: %s out of range" msgstr "%s: %s ở ngoại phạm vi" #: builtins/common.c:272 builtins/common.c:274 msgid "argument" msgstr "đối số" #: builtins/common.c:274 #, c-format msgid "%s out of range" msgstr "%s ở ngoại phạm vi" #: builtins/common.c:282 #, c-format msgid "%s: no such job" msgstr "%s: không có công việc như vậy" #: builtins/common.c:290 #, c-format msgid "%s: no job control" msgstr "%s: không có điều khiển công việc" #: builtins/common.c:292 msgid "no job control" msgstr "không có điều khiển công việc" #: builtins/common.c:302 #, c-format msgid "%s: restricted" msgstr "%s: bị hạn chế" #: builtins/common.c:304 msgid "restricted" msgstr "bị hạn chế" #: builtins/common.c:312 #, c-format msgid "%s: not a shell builtin" msgstr "%s: không phải shell" #: builtins/common.c:321 #, c-format msgid "write error: %s" msgstr "lỗi ghi: %s" #: builtins/common.c:329 #, c-format msgid "error setting terminal attributes: %s" msgstr "lỗi đặt các thuộc tính thiết bị cuối: %s" #: builtins/common.c:331 #, c-format msgid "error getting terminal attributes: %s" msgstr "lỗi lấy các thuộc tính thiết bị cuối: %s" #: builtins/common.c:563 #, c-format msgid "%s: error retrieving current directory: %s: %s\n" msgstr "%s: lỗi lấy thư mục hiện thời: %s: %s\n" #: builtins/common.c:629 builtins/common.c:631 #, c-format msgid "%s: ambiguous job spec" msgstr "%s: đặc tả công việc mơ hồ" #: builtins/complete.def:276 #, c-format msgid "%s: invalid action name" msgstr "%s: tên hành động không hợp lệ" #: builtins/complete.def:449 builtins/complete.def:644 #: builtins/complete.def:853 #, c-format msgid "%s: no completion specification" msgstr "%s: không có đặc tả hoàn thành" #: builtins/complete.def:696 msgid "warning: -F option may not work as you expect" msgstr "cảnh báo: tùy chọn \"-F\" có thể không hoạt động như mong đợi" #: builtins/complete.def:698 msgid "warning: -C option may not work as you expect" msgstr "cảnh báo: tùy chọn \"-C\" có thể không hoạt động như mong đợi" #: builtins/complete.def:826 msgid "not currently executing completion function" msgstr "hiện thời không thực thi chức năng hoàn thành" #: builtins/declare.def:124 msgid "can only be used in a function" msgstr "chỉ có thể dùng trong một hàm" #: builtins/declare.def:366 msgid "cannot use `-f' to make functions" msgstr "không thể dùng \"-f\" để tạo hàm" #: builtins/declare.def:378 execute_cmd.c:5105 #, c-format msgid "%s: readonly function" msgstr "%s: hàm chỉ đọc" #: builtins/declare.def:474 #, c-format msgid "%s: cannot destroy array variables in this way" msgstr "%s: không thể hủy biến mảng bằng cách này" #: builtins/declare.def:481 #, c-format msgid "%s: cannot convert associative to indexed array" msgstr "%s: không thể chuyển đổi mảng kết hợp sang mảng chỉ số" #: builtins/enable.def:137 builtins/enable.def:145 msgid "dynamic loading not available" msgstr "không có chức năng nạp động" #: builtins/enable.def:312 #, c-format msgid "cannot open shared object %s: %s" msgstr "không thể mở đối tượng dùng chung %s: %s" #: builtins/enable.def:335 #, c-format msgid "cannot find %s in shared object %s: %s" msgstr "không tìm thấy %s trong đối tượng dùng chung %s: %s" #: builtins/enable.def:459 #, c-format msgid "%s: not dynamically loaded" msgstr "%s không được nạp động" #: builtins/enable.def:474 #, c-format msgid "%s: cannot delete: %s" msgstr "%s: không thể xoá: %s" #: builtins/evalfile.c:135 builtins/hash.def:171 execute_cmd.c:4961 #: shell.c:1457 #, c-format msgid "%s: is a directory" msgstr "%s: là thư mục" #: builtins/evalfile.c:140 #, c-format msgid "%s: not a regular file" msgstr "%s: không phải là tập tin thường" #: builtins/evalfile.c:148 #, c-format msgid "%s: file is too large" msgstr "%s: tập tin quá lớn" #: builtins/evalfile.c:182 builtins/evalfile.c:200 execute_cmd.c:5032 #: shell.c:1467 #, c-format msgid "%s: cannot execute binary file" msgstr "%s: không thể thực hiện tập tin nhị phân" #: builtins/exec.def:154 builtins/exec.def:156 builtins/exec.def:228 #, c-format msgid "%s: cannot execute: %s" msgstr "%s: không thể thực hiện: %s" #: builtins/exit.def:65 #, c-format msgid "logout\n" msgstr "đăng xuất\n" #: builtins/exit.def:88 msgid "not login shell: use `exit'" msgstr "không phải shell đăng nhập: hãy dùng lệnh \"exit\"" #: builtins/exit.def:120 #, c-format msgid "There are stopped jobs.\n" msgstr "Có công việc bị dừng.\n" #: builtins/exit.def:122 #, c-format msgid "There are running jobs.\n" msgstr "Có công việc đang chạy.\n" #: builtins/fc.def:262 msgid "no command found" msgstr "không tìm thấy lệnh" #: builtins/fc.def:312 builtins/fc.def:359 msgid "history specification" msgstr "đặc tả lịch sử" #: builtins/fc.def:380 #, c-format msgid "%s: cannot open temp file: %s" msgstr "%s: không thể mở tập tin tạm: %s" #: builtins/fg_bg.def:149 builtins/jobs.def:282 msgid "current" msgstr "hiện tại" #: builtins/fg_bg.def:158 #, c-format msgid "job %d started without job control" msgstr "công việc %d đã khởi chạy mà không có điều khiển công việc" #: builtins/getopt.c:110 #, c-format msgid "%s: illegal option -- %c\n" msgstr "%s: tùy chọn không được phép -- %c\n" #: builtins/getopt.c:111 #, c-format msgid "%s: option requires an argument -- %c\n" msgstr "%s: tùy chọn cần đối số -- %c\n" #: builtins/hash.def:92 msgid "hashing disabled" msgstr "tắt băm" #: builtins/hash.def:138 #, c-format msgid "%s: hash table empty\n" msgstr "%s: bảng băm rỗng\n" #: builtins/hash.def:245 #, c-format msgid "hits\tcommand\n" msgstr "trúng\tlệnh\n" #: builtins/help.def:130 #, c-format msgid "Shell commands matching keyword `" msgid_plural "Shell commands matching keywords `" msgstr[0] "Câu lệnh shell tương ứng với từ khoá `" #: builtins/help.def:168 #, c-format msgid "no help topics match `%s'. Try `help help' or `man -k %s' or `info %s'." msgstr "không có trợ giúp cho `%s'. Thử `help help', `man -k %s' hoặc `info %s'" #: builtins/help.def:185 #, c-format msgid "%s: cannot open: %s" msgstr "%s: không thể mở: %s" #: builtins/help.def:337 #, c-format msgid "" "These shell commands are defined internally. Type `help' to see this list.\n" "Type `help name' to find out more about the function `name'.\n" "Use `info bash' to find out more about the shell in general.\n" "Use `man -k' or `info' to find out more about commands not in this list.\n" "\n" "A star (*) next to a name means that the command is disabled.\n" "\n" msgstr "" "Những câu lệnh này được định nghĩa nội bộ. Gõ `help' để xem danh sách này.\n" "Gõ `help TÊN' để biết chi tiết về hàm `TÊN'.\n" "Dùng `info bash' để tìm thông tin chung về shell nói chung.\n" "Dùng `man -k' hoặc `info' để tìm thông tin về lệnh ngoài danh sách này.\n" "\n" "Dấu sao (*) bên cạnh tên nghĩa là lệnh bị tắt.\n" "\n" #: builtins/history.def:154 msgid "cannot use more than one of -anrw" msgstr "chỉ có thể dùng một của những tùy chọn -anrw" #: builtins/history.def:186 msgid "history position" msgstr "vị trí lịch sử" #: builtins/history.def:365 #, c-format msgid "%s: history expansion failed" msgstr "%s: lỗi bung lịch sử" #: builtins/inlib.def:71 #, c-format msgid "%s: inlib failed" msgstr "%s: inlib bị lỗi" #: builtins/jobs.def:109 msgid "no other options allowed with `-x'" msgstr "không cho phép dùng tùy chọn thêm với \"-x\"" #: builtins/kill.def:198 #, c-format msgid "%s: arguments must be process or job IDs" msgstr "%s: đối số phải là ID tiến trình hoặc công việc" #: builtins/kill.def:261 msgid "Unknown error" msgstr "Lỗi không rõ" #: builtins/let.def:95 builtins/let.def:120 expr.c:552 expr.c:567 msgid "expression expected" msgstr "cần biểu thức" #: builtins/mapfile.def:172 #, c-format msgid "%s: not an indexed array" msgstr "%s: không phải là mảng chỉ số" #: builtins/mapfile.def:256 builtins/read.def:279 #, c-format msgid "%s: invalid file descriptor specification" msgstr "%s: đặc tả bộ mô tả tập tin không hợp lệ" #: builtins/mapfile.def:264 builtins/read.def:286 #, c-format msgid "%d: invalid file descriptor: %s" msgstr "%d: bộ mô tả tập tin không hợp lệ: %s" #: builtins/mapfile.def:273 builtins/mapfile.def:311 #, c-format msgid "%s: invalid line count" msgstr "%s: sai đếm dòng" #: builtins/mapfile.def:284 #, c-format msgid "%s: invalid array origin" msgstr "%s: gốc mảng không hợp lệ" #: builtins/mapfile.def:301 #, c-format msgid "%s: invalid callback quantum" msgstr "%s: lượng gọi ngược không hợp lệ" #: builtins/mapfile.def:333 msgid "empty array variable name" msgstr "tên biến mảng vẫn trống" #: builtins/mapfile.def:354 msgid "array variable support required" msgstr "cần hỗ trợ biến mảng" #: builtins/printf.def:394 #, c-format msgid "`%s': missing format character" msgstr "`%s': thiếu ký tự định dạng" #: builtins/printf.def:448 #, c-format msgid "`%c': invalid time format specification" msgstr "`%c': đặc tả định dạng thời gian không đúng" #: builtins/printf.def:635 #, c-format msgid "`%c': invalid format character" msgstr "\"%c\": ký tự định dạng không hợp lệ" #: builtins/printf.def:662 #, c-format msgid "warning: %s: %s" msgstr "cảnh báo: %s: %s" #: builtins/printf.def:840 msgid "missing hex digit for \\x" msgstr "thiếu chữ số thập phân cho \\x" #: builtins/printf.def:855 #, c-format msgid "missing unicode digit for \\%c" msgstr "thiếu chữ số unicode cho \\%c" #: builtins/pushd.def:195 msgid "no other directory" msgstr "không có thư mục khác" #: builtins/pushd.def:462 msgid "" msgstr "" #: builtins/pushd.def:506 msgid "directory stack empty" msgstr "chồng thư mục trống" #: builtins/pushd.def:508 msgid "directory stack index" msgstr "chỉ mục chồng thư mục" #: builtins/pushd.def:683 msgid "" "Display the list of currently remembered directories. Directories\n" " find their way onto the list with the `pushd' command; you can get\n" " back up through the list with the `popd' command.\n" " \n" " Options:\n" " -c\tclear the directory stack by deleting all of the elements\n" " -l\tdo not print tilde-prefixed versions of directories relative\n" " \tto your home directory\n" " -p\tprint the directory stack with one entry per line\n" " -v\tprint the directory stack with one entry per line prefixed\n" " \twith its position in the stack\n" " \n" " Arguments:\n" " +N\tDisplays the Nth entry counting from the left of the list shown by\n" " \tdirs when invoked without options, starting with zero.\n" " \n" " -N\tDisplays the Nth entry counting from the right of the list shown by\n" "\tdirs when invoked without options, starting with zero." msgstr "" "Hiển thị danh sách các thư mục được nhớ hiện thời. Lệnh `pushd' thêm\n" " thư mục vào danh sách này. `popd' lấy thư mục khỏi danh sách.\n" "\n" " Tùy chọn:\n" " -c\txoá mọi phần tử trong chồng thư mục\n" " -l\tkhông in phiên bản thư mục có dấu ngã nằm trước\n" " \tmà tương ứng với thư mục chính của người dùng\n" " -p\tin chồng thư mục mỗi dòng một mục\n" " -v\tin chồng thư mục mỗi dòng một mục kèm vị trí trong chồng\n" "\n" " Đối số:\n" " +N\thiển thị mục thứ N đếm từ bên trái khi gọi không tuỳ chọn,\n" " bắt đầu từ số không.\n" "\n" " -N\thiển thị mục thứ N đếm từ bên phải khi gọi không tuỳ chọn,\n" " bắt đầu từ số không." #: builtins/pushd.def:705 msgid "" "Adds a directory to the top of the directory stack, or rotates\n" " the stack, making the new top of the stack the current working\n" " directory. With no arguments, exchanges the top two directories.\n" " \n" " Options:\n" " -n\tSuppresses the normal change of directory when adding\n" " \tdirectories to the stack, so only the stack is manipulated.\n" " \n" " Arguments:\n" " +N\tRotates the stack so that the Nth directory (counting\n" " \tfrom the left of the list shown by `dirs', starting with\n" " \tzero) is at the top.\n" " \n" " -N\tRotates the stack so that the Nth directory (counting\n" " \tfrom the right of the list shown by `dirs', starting with\n" " \tzero) is at the top.\n" " \n" " dir\tAdds DIR to the directory stack at the top, making it the\n" " \tnew current working directory.\n" " \n" " The `dirs' builtin displays the directory stack." msgstr "" "Thêm thư mục vào trên chồng thư mục, hoặc xoay chồng, làm cho thư mục\n" " hiện thời nằm ở trên đầu. Đổi vị trí hai thư mục trên cùng nếu\n" " không có đối số.\n" "\n" " Tùy chọn:\n" " -n\tngăn thay đổi thư mục bình thường khi thêm, chỉ thao tác\n" " \ttrên chồng thư mục.\n" "\n" " Đối số:\n" " +N\txoay chồng để thư mục thứ N (đếm từ bên trái `dirs', bắt\n" " \tđầu từ số không) nằm ở đầu.\n" "\n" " -N\txoay chồng để thư mục thứ N (đếm từ bên phải `dirs', bắt\n" " \tđầu từ số không) nằm ở đầu.\n" "\n" " THƯ-MỤC\tthêm THƯ-MỤC vào đầu chồng thư mục và dùng làm thư mục\n" " \tlàm việc hiện thời.\n" "\n" " Lệnh `dirs' hiển thị chồng thư mục." #: builtins/pushd.def:730 msgid "" "Removes entries from the directory stack. With no arguments, removes\n" " the top directory from the stack, and changes to the new top directory.\n" " \n" " Options:\n" " -n\tSuppresses the normal change of directory when removing\n" " \tdirectories from the stack, so only the stack is manipulated.\n" " \n" " Arguments:\n" " +N\tRemoves the Nth entry counting from the left of the list\n" " \tshown by `dirs', starting with zero. For example: `popd +0'\n" " \tremoves the first directory, `popd +1' the second.\n" " \n" " -N\tRemoves the Nth entry counting from the right of the list\n" " \tshown by `dirs', starting with zero. For example: `popd -0'\n" " \tremoves the last directory, `popd -1' the next to last.\n" " \n" " The `dirs' builtin displays the directory stack." msgstr "" "Gỡ bỏ thư mục khỏi chồng thư mục. Không đưa ra đối số thì bỏ thư mục\n" " đầu khỏi chồng và chuyển đổi sang thư mục đầu mới.\n" "\n" " Tùy chọn:\n" " -n\tngăn thay đổi thư mục bình thường khi thêm, chỉ thao tác\n" "\t\ttrên chồng thư mục.\n" "\n" " Đối số:\n" " +N\txoay chồng để thư mục thứ N (đếm từ bên trái `dirs', bắt\n" " \tđầu từ số không) nằm ở đầu. Ví dụ `popd +0' bỏ thư mục\n" " đầu tiên, `popd +1' bỏ thư mục thứ hai.\n" "\n" " -N\txoay chồng để thư mục thứ N (đếm từ bên phải `dirs', bắt\n" " \tđầu từ số không) nằm ở đầu. Ví dụ `popd -0' bỏ thư mục\n" " cuối cùng, `popd -1' bỏ thư mục kế cuối.\n" "\n" " Lệnh `dirs' hiển thị chồng thư mục." #: builtins/read.def:252 #, c-format msgid "%s: invalid timeout specification" msgstr "%s: sai xác định quá hạn" #: builtins/read.def:588 #, c-format msgid "read error: %d: %s" msgstr "lỗi đọc: %d: %s" #: builtins/return.def:73 msgid "can only `return' from a function or sourced script" msgstr "chỉ có thể \"return\" từ một hàm hoặc văn lệnh được 'source'" #: builtins/set.def:771 msgid "cannot simultaneously unset a function and a variable" msgstr "không thể hủy đặt đồng thời một hàm VÀ một biến" #: builtins/set.def:808 #, c-format msgid "%s: cannot unset" msgstr "%s: không thể hủy đặt" #: builtins/set.def:815 #, c-format msgid "%s: cannot unset: readonly %s" msgstr "%s: không thể hủy đặt: %s chỉ đọc" #: builtins/set.def:826 #, c-format msgid "%s: not an array variable" msgstr "%s: không phải biến mảng" #: builtins/setattr.def:186 #, c-format msgid "%s: not a function" msgstr "%s: không phải hàm" #: builtins/shift.def:71 builtins/shift.def:77 msgid "shift count" msgstr "số lượng dời" #: builtins/shopt.def:264 msgid "cannot set and unset shell options simultaneously" msgstr "không thể đồng thời đặt và hủy đặt các tùy chọn shell" #: builtins/shopt.def:329 #, c-format msgid "%s: invalid shell option name" msgstr "%s: tên tùy chọn shell không hợp lệ" #: builtins/source.def:130 msgid "filename argument required" msgstr "cần đối số tên tập tin" #: builtins/source.def:155 #, c-format msgid "%s: file not found" msgstr "%s: không tìm thấy tập tin" #: builtins/suspend.def:101 msgid "cannot suspend" msgstr "không thể ngưng" #: builtins/suspend.def:111 msgid "cannot suspend a login shell" msgstr "không thể ngưng shell đăng nhập" #: builtins/type.def:234 #, c-format msgid "%s is aliased to `%s'\n" msgstr "%s là bí danh của `%s'\n" #: builtins/type.def:255 #, c-format msgid "%s is a shell keyword\n" msgstr "%s là từ khoá shell\n" #: builtins/type.def:274 #, c-format msgid "%s is a function\n" msgstr "%s là hàm\n" #: builtins/type.def:296 #, c-format msgid "%s is a shell builtin\n" msgstr "%s là lệnh dựng sẵn shell\n" #: builtins/type.def:317 builtins/type.def:391 #, c-format msgid "%s is %s\n" msgstr "%s là %s\n" #: builtins/type.def:337 #, c-format msgid "%s is hashed (%s)\n" msgstr "%s được băm (%s)\n" #: builtins/ulimit.def:376 #, c-format msgid "%s: invalid limit argument" msgstr "%s: đối số giới hạn không hợp lệ" #: builtins/ulimit.def:402 #, c-format msgid "`%c': bad command" msgstr "\"%c\": câu lệnh sai" #: builtins/ulimit.def:431 #, c-format msgid "%s: cannot get limit: %s" msgstr "%s: không thể lấy giới hạn: %s" #: builtins/ulimit.def:457 msgid "limit" msgstr "giới hạn" #: builtins/ulimit.def:469 builtins/ulimit.def:769 #, c-format msgid "%s: cannot modify limit: %s" msgstr "%s: không thể sửa đổi giới hạn: %s" #: builtins/umask.def:118 msgid "octal number" msgstr "số bát phân" #: builtins/umask.def:231 #, c-format msgid "`%c': invalid symbolic mode operator" msgstr "\"%c\": toán tử chế độ tượng trưng không hợp lệ" #: builtins/umask.def:286 #, c-format msgid "`%c': invalid symbolic mode character" msgstr "\"%c\": ký tự chế độ tượng trưng không hợp lệ" #: error.c:90 error.c:321 error.c:323 error.c:325 msgid " line " msgstr " dòng " #: error.c:165 #, c-format msgid "last command: %s\n" msgstr "lệnh cuối: %s\n" #: error.c:173 #, c-format msgid "Aborting..." msgstr "Hủy bỏ..." #: error.c:406 msgid "unknown command error" msgstr "lỗi lệnh không rõ" #: error.c:407 msgid "bad command type" msgstr "kiểu lệnh sai" #: error.c:408 msgid "bad connector" msgstr "bộ kết nối sai" #: error.c:409 msgid "bad jump" msgstr "nhảy sai" #: error.c:447 #, c-format msgid "%s: unbound variable" msgstr "%s: biến chưa liên kết" #: eval.c:181 #, c-format msgid "\atimed out waiting for input: auto-logout\n" msgstr "\aquá hạn trong khi đợi dữ liệu nhập: tự động đăng xuất\n" #: execute_cmd.c:504 #, c-format msgid "cannot redirect standard input from /dev/null: %s" msgstr "không thể chuyển hướng đầu vào chuẩn từ /dev/null: %s" #: execute_cmd.c:1168 #, c-format msgid "TIMEFORMAT: `%c': invalid format character" msgstr "ĐỊNH DẠNG THỜI GIAN: \"%c\": ký tự định dạng không hợp lệ" #: execute_cmd.c:2121 msgid "pipe error" msgstr "lỗi ống dẫn" #: execute_cmd.c:4640 #, c-format msgid "%s: restricted: cannot specify `/' in command names" msgstr "%s: bị hạn chế: không thể dùng `/' trong tên lệnh" #: execute_cmd.c:4735 #, c-format msgid "%s: command not found" msgstr "%s: không tìm thấy lệnh" #: execute_cmd.c:4959 #, c-format msgid "%s: %s" msgstr "%s: %s" #: execute_cmd.c:4995 #, c-format msgid "%s: %s: bad interpreter" msgstr "%s: %s: bộ thông dịch sai" #: execute_cmd.c:5144 #, c-format msgid "cannot duplicate fd %d to fd %d" msgstr "không thể nhân đôi fd %d thành fd %d" #: expr.c:256 msgid "expression recursion level exceeded" msgstr "vượt quá ngưỡng đệ quy của biểu thức" #: expr.c:280 msgid "recursion stack underflow" msgstr "trán ngược đống đệ quy" #: expr.c:422 msgid "syntax error in expression" msgstr "lỗi cú pháp trong biểu thức" #: expr.c:463 msgid "attempted assignment to non-variable" msgstr "thử gán cho đồ không phải biến" #: expr.c:486 expr.c:491 expr.c:807 msgid "division by 0" msgstr "chia cho không" #: expr.c:517 msgid "bug: bad expassign token" msgstr "lỗi: token expassign sai" #: expr.c:564 msgid "`:' expected for conditional expression" msgstr "cần `:' cho biểu thức điều kiện" #: expr.c:832 msgid "exponent less than 0" msgstr "số mũ nhỏ hơn 0" #: expr.c:887 msgid "identifier expected after pre-increment or pre-decrement" msgstr "cần định danh sau tăng/giảm dần trước" #: expr.c:910 msgid "missing `)'" msgstr "thiếu `)'" #: expr.c:959 expr.c:1282 msgid "syntax error: operand expected" msgstr "lỗi cú pháp: cần toán hạng" #: expr.c:1284 msgid "syntax error: invalid arithmetic operator" msgstr "lỗi cú pháp: toán tử số học không hợp lệ" #: expr.c:1308 #, c-format msgid "%s%s%s: %s (error token is \"%s\")" msgstr "%s%s%s: %s (hiệu bài lỗi là \"%s\")" #: expr.c:1366 msgid "invalid arithmetic base" msgstr "cơ số (số học) không hợp lệ" #: expr.c:1386 msgid "value too great for base" msgstr "cơ số có giá trị quá lớn" #: expr.c:1435 #, c-format msgid "%s: expression error\n" msgstr "%s: lỗi biểu thức\n" #: general.c:61 msgid "getcwd: cannot access parent directories" msgstr "getcwd: không thể truy cập thư mục cấp trên" #: input.c:94 subst.c:5082 #, c-format msgid "cannot reset nodelay mode for fd %d" msgstr "không thể đặt lại chế độ nodelay cho fd %d" #: input.c:260 #, c-format msgid "cannot allocate new file descriptor for bash input from fd %d" msgstr "không thể cấp phát bộ mô tả tập tin mới cho dữ liệu nhập bash từ fd %d" #: input.c:268 #, c-format msgid "save_bash_input: buffer already exists for new fd %d" msgstr "save_bash_input: đã có bộ đệm cho fd mới %d" # Nghĩa chữ ? #: jobs.c:468 msgid "start_pipeline: pgrp pipe" msgstr "start_pipeline: pgrp pipe" #: jobs.c:889 #, c-format msgid "forked pid %d appears in running job %d" msgstr "pid được tánh nhánh %d có vẻ đang chạy trong công việc %d" #: jobs.c:1007 #, c-format msgid "deleting stopped job %d with process group %ld" msgstr "đang xoá công việc bị dừng chạy %d với nhóm tiến trình %ld" #: jobs.c:1112 #, c-format msgid "add_process: process %5ld (%s) in the_pipeline" msgstr "add_process: tiến trình %5ld (%s) trong the_pipeline" #: jobs.c:1115 #, c-format msgid "add_process: pid %5ld (%s) marked as still alive" msgstr "add_process: pid %5ld (%s) được đánh dấu vẫn hoạt động" #: jobs.c:1430 #, c-format msgid "describe_pid: %ld: no such pid" msgstr "describe_pid: %ld: không có pid như vậy" #: jobs.c:1445 #, c-format msgid "Signal %d" msgstr "Tín hiệu %d" #: jobs.c:1459 jobs.c:1484 msgid "Done" msgstr "Hoàn tất" #: jobs.c:1464 siglist.c:123 msgid "Stopped" msgstr "Bị dừng" #: jobs.c:1468 #, c-format msgid "Stopped(%s)" msgstr "Bị dừng(%s)" #: jobs.c:1472 msgid "Running" msgstr "Đang chạy" #: jobs.c:1486 #, c-format msgid "Done(%d)" msgstr "Hoàn tất(%d)" #: jobs.c:1488 #, c-format msgid "Exit %d" msgstr "Thoát %d" #: jobs.c:1491 msgid "Unknown status" msgstr "Không rõ trạng thái" #: jobs.c:1578 #, c-format msgid "(core dumped) " msgstr "(xuất ra core)" #: jobs.c:1597 #, c-format msgid " (wd: %s)" msgstr " (wd: %s)" #: jobs.c:1805 #, c-format msgid "child setpgid (%ld to %ld)" msgstr "setpgid tiến trình con (%ld thành %ld)" #: jobs.c:2133 nojobs.c:585 #, c-format msgid "wait: pid %ld is not a child of this shell" msgstr "wait: pid %ld không phải là tiến trình con của shell này" #: jobs.c:2360 #, c-format msgid "wait_for: No record of process %ld" msgstr "wait_for: Không có mục ghi về tiến trình %ld" #: jobs.c:2637 #, c-format msgid "wait_for_job: job %d is stopped" msgstr "wait_for_job: công việc %d bị dừng chạy" #: jobs.c:2859 #, c-format msgid "%s: job has terminated" msgstr "%s: công việc bị chấm dứt" #: jobs.c:2868 #, c-format msgid "%s: job %d already in background" msgstr "%s: công việc %d đã đang chạy nền" #: jobs.c:3089 msgid "waitchld: turning on WNOHANG to avoid indefinite block" msgstr "waitchld: đang bật WNOHANG để tránh bị chặn vô hạn" #: jobs.c:3538 #, c-format msgid "%s: line %d: " msgstr "%s: dòng %d: " #: jobs.c:3552 nojobs.c:814 #, c-format msgid " (core dumped)" msgstr " (xuất ra core)" #: jobs.c:3564 jobs.c:3577 #, c-format msgid "(wd now: %s)\n" msgstr "(wd bây giờ: %s)\n" #: jobs.c:3609 msgid "initialize_job_control: getpgrp failed" msgstr "initialize_job_control: getpgrp bị lỗi" #: jobs.c:3669 msgid "initialize_job_control: line discipline" msgstr "initialize_job_control: kỷ luật dòng" # Nghĩa chữ : dừng dịch #: jobs.c:3679 msgid "initialize_job_control: setpgid" msgstr "initialize_job_control: setpgid" #: jobs.c:3707 #, c-format msgid "cannot set terminal process group (%d)" msgstr "không thể đặt nhóm tiến trình cuối cùng (%d)" #: jobs.c:3712 msgid "no job control in this shell" msgstr "không có điều khiển công việc trong shell này" #: lib/malloc/malloc.c:296 #, c-format msgid "malloc: failed assertion: %s\n" msgstr "malloc: failed assertion: %s\n" #: lib/malloc/malloc.c:312 #, c-format msgid "" "\r\n" "malloc: %s:%d: assertion botched\r\n" msgstr "" "\\r\n" "malloc: %s:%d: assertion botched\\r\n" #: lib/malloc/malloc.c:313 msgid "unknown" msgstr "không rõ" #: lib/malloc/malloc.c:797 msgid "malloc: block on free list clobbered" msgstr "malloc (cấp phát bộ nhớ): khối bộ nhớ dành riêng trên danh sách các khối còn rảnh bị ghi vào" #: lib/malloc/malloc.c:874 msgid "free: called with already freed block argument" msgstr "free: đã được gọi với đối số khối đã giải phỏng" #: lib/malloc/malloc.c:877 msgid "free: called with unallocated block argument" msgstr "free: đã được gọi với đối số khối chưa cấp phát" #: lib/malloc/malloc.c:896 msgid "free: underflow detected; mh_nbytes out of range" msgstr "free: phát hiện sự tràn ngược; mh_nbytes ở ngoại phạm vi" #: lib/malloc/malloc.c:902 msgid "free: start and end chunk sizes differ" msgstr "free: kích cỡ đoạn đầu và cuối không trùng" #: lib/malloc/malloc.c:1001 msgid "realloc: called with unallocated block argument" msgstr "realloc: đã được gọi với đối số khối chưa cấp phát" #: lib/malloc/malloc.c:1016 msgid "realloc: underflow detected; mh_nbytes out of range" msgstr "realloc: phát hiện sự tràn ngược; mh_nbytes ở ngoại phạm vi" #: lib/malloc/malloc.c:1022 msgid "realloc: start and end chunk sizes differ" msgstr "realloc: kích cỡ đoạn đầu và cuối không trùng" #: lib/malloc/table.c:177 #, c-format msgid "register_alloc: alloc table is full with FIND_ALLOC?\n" msgstr "register_alloc: bảng cấp phát đầy với FIND_ALLOC?\n" #: lib/malloc/table.c:184 #, c-format msgid "register_alloc: %p already in table as allocated?\n" msgstr "register_alloc: %p đã có trong bảng như được cấp phát?\n" #: lib/malloc/table.c:220 #, c-format msgid "register_free: %p already in table as free?\n" msgstr "register_free: %p đã có trong bảng như còn trống?\n" #: lib/sh/fmtulong.c:101 msgid "invalid base" msgstr "cơ số không hợp lệ" #: lib/sh/netopen.c:168 #, c-format msgid "%s: host unknown" msgstr "%s: không rõ máy" #: lib/sh/netopen.c:175 #, c-format msgid "%s: invalid service" msgstr "%s: dịch vụ không hợp lệ" #: lib/sh/netopen.c:306 #, c-format msgid "%s: bad network path specification" msgstr "%s: đặc tả đường dẫn mạng sai" #: lib/sh/netopen.c:346 msgid "network operations not supported" msgstr "không hỗ trợ thao tác mạng" #: locale.c:192 #, c-format msgid "setlocale: LC_ALL: cannot change locale (%s)" msgstr "setlocale: LC_ALL: không thể chuyển đổi miền địa phương (%s)" #: locale.c:194 #, c-format msgid "setlocale: LC_ALL: cannot change locale (%s): %s" msgstr "setlocale: LC_ALL: không thể chuyển đổi miền địa phương (%s): %s" #: locale.c:247 #, c-format msgid "setlocale: %s: cannot change locale (%s)" msgstr "setlocale: %s: không thể chuyển đổi miền địa phương (%s)" #: locale.c:249 #, c-format msgid "setlocale: %s: cannot change locale (%s): %s" msgstr "setlocale: %s: không thể chuyển đổi miền địa phương (%s): %s" #: mailcheck.c:433 msgid "You have mail in $_" msgstr "Bạn có thư trong $_" #: mailcheck.c:458 msgid "You have new mail in $_" msgstr "Bạn có thư mới trong $_" #: mailcheck.c:474 #, c-format msgid "The mail in %s has been read\n" msgstr "Đã đọc thư trong %s\n" #: make_cmd.c:323 msgid "syntax error: arithmetic expression required" msgstr "lỗi cú pháp: cần biểu thức số học" #: make_cmd.c:325 msgid "syntax error: `;' unexpected" msgstr "lỗi cú pháp: dấu chấm phẩy `;' không mong đợi" #: make_cmd.c:326 #, c-format msgid "syntax error: `((%s))'" msgstr "lỗi cú pháp: `((%s))'" #: make_cmd.c:575 #, c-format msgid "make_here_document: bad instruction type %d" msgstr "make_here_document: kiểu chỉ dẫn sai %d" #: make_cmd.c:659 #, c-format msgid "here-document at line %d delimited by end-of-file (wanted `%s')" msgstr "tài liệu này ở dòng %d định giới bằng kết thúc tập tin (muốn `%s')" #: make_cmd.c:756 #, c-format msgid "make_redirection: redirection instruction `%d' out of range" msgstr "make_redirection: chỉ dẫn chuyển hướng \"%d\" ở ngoại phạm vi" #: parse.y:3173 parse.y:3444 #, c-format msgid "unexpected EOF while looking for matching `%c'" msgstr "gặp kết thúc tập tin bất thường trong khi tìm \"%c\" tương ứng" #: parse.y:4025 msgid "unexpected EOF while looking for `]]'" msgstr "gặp kết thúc tập tin bất thường trong khi tìm \"]]\"" #: parse.y:4030 #, c-format msgid "syntax error in conditional expression: unexpected token `%s'" msgstr "gặp lỗi cú pháp trong biểu thức điều kiện: hiệu bài bất thường `%s'" #: parse.y:4034 msgid "syntax error in conditional expression" msgstr "gặp lỗi cú pháp trong biểu thức điều kiện" #: parse.y:4112 #, c-format msgid "unexpected token `%s', expected `)'" msgstr "gặp hiệu bài bất thường `%s', đang cần `)'" #: parse.y:4116 msgid "expected `)'" msgstr "cần `)'" #: parse.y:4144 #, c-format msgid "unexpected argument `%s' to conditional unary operator" msgstr "đối số bất thường `%s' cho toán tử nguyên phân điều kiện" #: parse.y:4148 msgid "unexpected argument to conditional unary operator" msgstr "đối số bất thường cho toán tử nguyên phân điều kiện" #: parse.y:4194 #, c-format msgid "unexpected token `%s', conditional binary operator expected" msgstr "hiệu bài bất thường `%s', cần toán tử hai ngôi điều kiện" #: parse.y:4198 msgid "conditional binary operator expected" msgstr "cần toán tử hai ngôi điều kiện" #: parse.y:4220 #, c-format msgid "unexpected argument `%s' to conditional binary operator" msgstr "đối số bất thường `%s' cho toán tử nhị phân điều kiện" #: parse.y:4224 msgid "unexpected argument to conditional binary operator" msgstr "đối số bất thường cho toán tử nhị phân điều kiện" #: parse.y:4235 #, c-format msgid "unexpected token `%c' in conditional command" msgstr "gặp hiệu bài bất thường \"%c\" trong câu lệnh điều kiện" #: parse.y:4238 #, c-format msgid "unexpected token `%s' in conditional command" msgstr "gặp hiệu bài bất thường `%s' trong câu lệnh điều kiện" #: parse.y:4242 #, c-format msgid "unexpected token %d in conditional command" msgstr "gặp hiệu bài bất thường \"%d\" trong câu lệnh điều kiện" #: parse.y:5566 #, c-format msgid "syntax error near unexpected token `%s'" msgstr "gặp lỗi cú pháp ở gần hiệu bài bất thường `%s'" #: parse.y:5584 #, c-format msgid "syntax error near `%s'" msgstr "lỗi cú pháp gần `%s'" #: parse.y:5594 msgid "syntax error: unexpected end of file" msgstr "lỗi cú pháp: kết thúc tập tin bất thường" #: parse.y:5594 msgid "syntax error" msgstr "lỗi cú pháp" #: parse.y:5656 #, c-format msgid "Use \"%s\" to leave the shell.\n" msgstr "Dùng `%s' để rời shell.\n" #: parse.y:5818 msgid "unexpected EOF while looking for matching `)'" msgstr "gặp kết thúc tập tin bất thường trong khi tìm `)' tương ứng" #: pcomplete.c:1030 #, c-format msgid "completion: function `%s' not found" msgstr "completion: không tìm thấy hàm `%s'" #: pcomplib.c:182 #, c-format msgid "progcomp_insert: %s: NULL COMPSPEC" msgstr "progcomp_insert: %s: NULL COMPSPEC" #: print_cmd.c:296 #, c-format msgid "print_command: bad connector `%d'" msgstr "print_command: bộ kết nối sai \"%d\"" #: print_cmd.c:368 #, c-format msgid "xtrace_set: %d: invalid file descriptor" msgstr "xtrace_set: %d: sai đặt bộ mô tả tập tin" #: print_cmd.c:373 msgid "xtrace_set: NULL file pointer" msgstr "xtrace_set: con trỏ tập tin NULL" # Nghĩa chữ ? #: print_cmd.c:377 #, c-format msgid "xtrace fd (%d) != fileno xtrace fp (%d)" msgstr "xtrace fd (%d) != fileno xtrace fp (%d)" #: print_cmd.c:1478 #, c-format msgid "cprintf: `%c': invalid format character" msgstr "cprintf: \"%c\": ký tự định dạng không hợp lệ" #: redir.c:122 msgid "file descriptor out of range" msgstr "bộ mô tả tập tin ở ngoại phạm vi" #: redir.c:178 #, c-format msgid "%s: ambiguous redirect" msgstr "%s: chuyển hướng mơ hồ" #: redir.c:182 #, c-format msgid "%s: cannot overwrite existing file" msgstr "%s: không thể ghi đè lên tập tin đã có" #: redir.c:187 #, c-format msgid "%s: restricted: cannot redirect output" msgstr "%s: bị hạn chế: không thể chuyển hướng kết xuất" #: redir.c:192 #, c-format msgid "cannot create temp file for here-document: %s" msgstr "không thể tạo tập tin tạm thời cho tài liệu này: %s" #: redir.c:196 #, c-format msgid "%s: cannot assign fd to variable" msgstr "%s: không thể gán fd vào biến" #: redir.c:548 msgid "/dev/(tcp|udp)/host/port not supported without networking" msgstr "/dev/(tcp|udp)/host/port không được hỗ trợ nếu không có mạng" #: redir.c:818 redir.c:930 redir.c:993 redir.c:1136 msgid "redirection error: cannot duplicate fd" msgstr "lỗi chuyển hướng: không thể nhân đôi fd" #: shell.c:333 msgid "could not find /tmp, please create!" msgstr "không tìm thấy /tmp, hãy tạo mới!." #: shell.c:337 msgid "/tmp must be a valid directory name" msgstr "\"/tmp\" phải là tên thư mục hợp lệ" #: shell.c:884 #, c-format msgid "%c%c: invalid option" msgstr "%c%c: tùy chọn không hợp lệ" #: shell.c:1652 msgid "I have no name!" msgstr "Không có tên!" #: shell.c:1795 #, c-format msgid "GNU bash, version %s-(%s)\n" msgstr "GNU bash, phiên bản %s-(%s)\n" #: shell.c:1796 #, c-format msgid "" "Usage:\t%s [GNU long option] [option] ...\n" "\t%s [GNU long option] [option] script-file ...\n" msgstr "" "Sử dụng:\t%s [tùy chọn GNU dài] [tùy chọn] ...\n" "\t%s [tùy chọn dài] [tùy chọn] tập-tin-văn-lệnh ...\n" #: shell.c:1798 msgid "GNU long options:\n" msgstr "Tùy chọn dài:\n" #: shell.c:1802 msgid "Shell options:\n" msgstr "Tùy chọn:\n" #: shell.c:1803 msgid "\t-irsD or -c command or -O shopt_option\t\t(invocation only)\n" msgstr "\t-irsD hoặc -c lệnh or -O shopt_option\t\t(chỉ gọi)\n" #: shell.c:1818 #, c-format msgid "\t-%s or -o option\n" msgstr "\t-%s hoặc -o tùy chọn\n" #: shell.c:1824 #, c-format msgid "Type `%s -c \"help set\"' for more information about shell options.\n" msgstr "Gõ `%s -c \"help set\"' để xem thông tin về các tùy chọn shell.\n" #: shell.c:1825 #, c-format msgid "Type `%s -c help' for more information about shell builtin commands.\n" msgstr "Gõ `%s -c help' để xem thông tin về các lệnh shell dựng sẵn.\n" #: shell.c:1826 #, c-format msgid "Use the `bashbug' command to report bugs.\n" msgstr "Dùng lệnh `bashbug' để thông báo lỗi.\n" #: sig.c:638 #, c-format msgid "sigprocmask: %d: invalid operation" msgstr "sigprocmask: %d: thao tác không hợp lệ" #: siglist.c:48 msgid "Bogus signal" msgstr "Tín hiệu giả" #: siglist.c:51 msgid "Hangup" msgstr "Treo" #: siglist.c:55 msgid "Interrupt" msgstr "Ngắt" #: siglist.c:59 msgid "Quit" msgstr "Thoát" #: siglist.c:63 msgid "Illegal instruction" msgstr "Câu lệnh không được phép" #: siglist.c:67 msgid "BPT trace/trap" msgstr "Theo vết/đặt bẫy BPT" #: siglist.c:75 msgid "ABORT instruction" msgstr "Câu lệnh HỦY BỎ" #: siglist.c:79 msgid "EMT instruction" msgstr "Câu lệnh EMT" #: siglist.c:83 msgid "Floating point exception" msgstr "Lỗi dấu chấm động" #: siglist.c:87 msgid "Killed" msgstr "Bị giết" #: siglist.c:91 msgid "Bus error" msgstr "Lỗi mạch nối" #: siglist.c:95 msgid "Segmentation fault" msgstr "Lỗi phân đoạn" #: siglist.c:99 msgid "Bad system call" msgstr "Lỗi lệnh gọi hệ thống" #: siglist.c:103 msgid "Broken pipe" msgstr "Ống dẫn hư" #: siglist.c:107 msgid "Alarm clock" msgstr "Đồng hồ báo thức" #: siglist.c:111 msgid "Terminated" msgstr "Bị chấm dứt" #: siglist.c:115 msgid "Urgent IO condition" msgstr "Điều kiện IO gấp" #: siglist.c:119 msgid "Stopped (signal)" msgstr "Bị dừng (tín hiệu)" #: siglist.c:127 msgid "Continue" msgstr "Tiếp tục" #: siglist.c:135 msgid "Child death or stop" msgstr "Tiến trình con đã giết hoặc dừng" #: siglist.c:139 msgid "Stopped (tty input)" msgstr "Bị dừng (tty nhập)" #: siglist.c:143 msgid "Stopped (tty output)" msgstr "Bị dừng (tty xuất)" #: siglist.c:147 msgid "I/O ready" msgstr "I/O sẵn sàng" #: siglist.c:151 msgid "CPU limit" msgstr "Giới hạn CPU" #: siglist.c:155 msgid "File limit" msgstr "Giới hạn tập tin" #: siglist.c:159 msgid "Alarm (virtual)" msgstr "Báo động (ảo)" #: siglist.c:163 msgid "Alarm (profile)" msgstr "Báo động (hồ sơ)" #: siglist.c:167 msgid "Window changed" msgstr "Cửa sổ bị thay đổi" #: siglist.c:171 msgid "Record lock" msgstr "Mục ghi bị khoá" #: siglist.c:175 msgid "User signal 1" msgstr "Tín hiệu người dùng 1" #: siglist.c:179 msgid "User signal 2" msgstr "Tín hiệu người dùng 2" #: siglist.c:183 msgid "HFT input data pending" msgstr "Dữ liệu nhập HFT bị hoãn" #: siglist.c:187 msgid "power failure imminent" msgstr "sắp bị cúp điện đột ngột" #: siglist.c:191 msgid "system crash imminent" msgstr "hệ thống sắp sụp đổ" #: siglist.c:195 msgid "migrate process to another CPU" msgstr "chuyển tiến trình sang CPU khác" #: siglist.c:199 msgid "programming error" msgstr "lỗi lập trình" #: siglist.c:203 msgid "HFT monitor mode granted" msgstr "Có chế độ màn hình HFT" #: siglist.c:207 msgid "HFT monitor mode retracted" msgstr "Không có chế độ màn hình HFT" #: siglist.c:211 msgid "HFT sound sequence has completed" msgstr "Đã hoàn thành chuỗi âm thanh HFT" #: siglist.c:215 msgid "Information request" msgstr "yêu cầu thông tin" #: siglist.c:223 msgid "Unknown Signal #" msgstr "Tín hiệu lạ #" #: siglist.c:225 #, c-format msgid "Unknown Signal #%d" msgstr "Tín hiệu lạ #%d" #: subst.c:1333 subst.c:1502 #, c-format msgid "bad substitution: no closing `%s' in %s" msgstr "thay thế sai: không có đóng `%s' trong %s" #: subst.c:2795 #, c-format msgid "%s: cannot assign list to array member" msgstr "%s: không thể gán danh sách cho bộ phận của mảng" #: subst.c:4979 subst.c:4995 msgid "cannot make pipe for process substitution" msgstr "không thể tạo ống dẫn để thay thế tiến trình" #: subst.c:5027 msgid "cannot make child for process substitution" msgstr "không thể tạo tiến trình con để thay thế tiến trình" #: subst.c:5072 #, c-format msgid "cannot open named pipe %s for reading" msgstr "không thể mở ống dẫn đặt tên %s để đọc" #: subst.c:5074 #, c-format msgid "cannot open named pipe %s for writing" msgstr "không thể mở ống dẫn có tên %s để ghi" #: subst.c:5092 #, c-format msgid "cannot duplicate named pipe %s as fd %d" msgstr "không thể nhân đôi ống dẫn đặt tên %s thành fd %d" #: subst.c:5284 msgid "cannot make pipe for command substitution" msgstr "không thể tạo ống dẫn để thay thế lệnh" #: subst.c:5322 msgid "cannot make child for command substitution" msgstr "không thể tạo tiến trình con để thay thế lệnh" #: subst.c:5339 msgid "command_substitute: cannot duplicate pipe as fd 1" msgstr "command_substitute: không thể nhân đôi ống dẫn thành fd 1" #: subst.c:5859 #, c-format msgid "%s: parameter null or not set" msgstr "%s: tham số null hoặc chưa được đặt" #: subst.c:6125 subst.c:6140 #, c-format msgid "%s: substring expression < 0" msgstr "%s: biểu thức chuỗi con < 0" #: subst.c:7271 #, c-format msgid "%s: bad substitution" msgstr "%s: thay thế sai" #: subst.c:7347 #, c-format msgid "$%s: cannot assign in this way" msgstr "$%s: không thể gán bằng cách này" #: subst.c:7684 msgid "future versions of the shell will force evaluation as an arithmetic substitution" msgstr "phiên bản shell mới sẽ ép buộc ước lượng dưới dạng một hàm thay thế số học" #: subst.c:8149 #, c-format msgid "bad substitution: no closing \"`\" in %s" msgstr "sai thay thế: không có \"`\" đóng trong %s" #: subst.c:9036 #, c-format msgid "no match: %s" msgstr "không khớp: %s" #: test.c:146 msgid "argument expected" msgstr "cần đối số" #: test.c:155 #, c-format msgid "%s: integer expression expected" msgstr "%s: cần biểu thức số nguyên" #: test.c:263 msgid "`)' expected" msgstr "cần `)'" #: test.c:265 #, c-format msgid "`)' expected, found %s" msgstr "cần `)', nhận được %s" #: test.c:280 test.c:698 test.c:701 #, c-format msgid "%s: unary operator expected" msgstr "%s: cần toán tử một ngôi" #: test.c:449 test.c:741 #, c-format msgid "%s: binary operator expected" msgstr "%s: cần toán tử hai ngôi" #: test.c:816 msgid "missing `]'" msgstr "thiếu `]'" #: trap.c:207 msgid "invalid signal number" msgstr "số thứ tự tín hiệu không hợp lệ" #: trap.c:337 #, c-format msgid "run_pending_traps: bad value in trap_list[%d]: %p" msgstr "run_pending_traps: giá trị sai trong danh sách trap_list[%d]: %p" #: trap.c:341 #, c-format msgid "run_pending_traps: signal handler is SIG_DFL, resending %d (%s) to myself" msgstr "run_pending_traps: bộ xử lý tín hiệu là SIG_DFL, đang gửi lại %d (%s) cho chính mình" #: trap.c:393 #, c-format msgid "trap_handler: bad signal %d" msgstr "trap_handler: tín hiệu sai %d" #: variables.c:363 #, c-format msgid "error importing function definition for `%s'" msgstr "gặp lỗi khi nhập lời xác định hàm cho `%s'" #: variables.c:755 #, c-format msgid "shell level (%d) too high, resetting to 1" msgstr "cấp shell (%d) quá cao nên đặt lại thành 1" #: variables.c:1932 msgid "make_local_variable: no function context at current scope" msgstr "make_local_variable: không có ngữ cảnh hàm ở phạm vi hiện thời" #: variables.c:3182 msgid "all_local_variables: no function context at current scope" msgstr "all_local_variables: không có ngữ cảnh hàm ở phạm vi hiện thời" #: variables.c:3427 #, c-format msgid "%s has null exportstr" msgstr "%s có exportstr null" #: variables.c:3432 variables.c:3441 #, c-format msgid "invalid character %d in exportstr for %s" msgstr "sai ký tự %d trong exportstr cho %s" #: variables.c:3447 #, c-format msgid "no `=' in exportstr for %s" msgstr "không có `=' trong exportstr cho %s" #: variables.c:3891 msgid "pop_var_context: head of shell_variables not a function context" msgstr "pop_var_context: đầu của shell_variables (các biến shell) không phải là ngữ cảnh hàm" #: variables.c:3904 msgid "pop_var_context: no global_variables context" msgstr "pop_var_context: không có ngữ cảnh global_variables (các biến toàn cục)" #: variables.c:3978 msgid "pop_scope: head of shell_variables not a temporary environment scope" msgstr "pop_scope: đầu của shell_variables (các biến shell) không phải là phạm vi môi trường tạm thời" #: variables.c:4786 #, c-format msgid "%s: %s: cannot open as FILE" msgstr "%s: %s: không thể mở dưới dạng TẬP-TIN" #: variables.c:4791 #, c-format msgid "%s: %s: invalid value for trace file descriptor" msgstr "%s: %s: sai đặt giá trị cho bộ mô tả tập tin vết" #: version.c:46 msgid "Copyright (C) 2011 Free Software Foundation, Inc." msgstr "Tác quyền (C) năm 2011 của Tổ chức Quỹ Phần mềm Tự do, Inc." #: version.c:47 msgid "License GPLv3+: GNU GPL version 3 or later \n" msgstr "Giấy phép GPLv3+: GNU GPL phiên bản 3 hoặc mới hơn \n" #: version.c:86 version2.c:83 #, c-format msgid "GNU bash, version %s (%s)\n" msgstr "GNU bash, phiên bản %s (%s)\n" #: version.c:91 version2.c:88 #, c-format msgid "This is free software; you are free to change and redistribute it.\n" msgstr "Đây là phần mềm tự do; bạn có quyền sửa đổi và phát hành lại nó.\n" #: version.c:92 version2.c:89 #, c-format msgid "There is NO WARRANTY, to the extent permitted by law.\n" msgstr "KHÔNG BẢO ĐẢM GÌ CẢ, với điều kiện được pháp luật cho phép.\n" #: version2.c:86 #, c-format msgid "Copyright (C) 2009 Free Software Foundation, Inc.\n" msgstr "Tác quyền (C) năm 2009 của Tổ chức Phần mềm Tự do.\n" #: version2.c:87 #, c-format msgid "License GPLv2+: GNU GPL version 2 or later \n" msgstr "Giấy phép GPLv2+: GNU GPL phiên bản 2 hoặc mới hơn \n" #: xmalloc.c:91 #, c-format msgid "%s: cannot allocate %lu bytes (%lu bytes allocated)" msgstr "%s: không thể cấp phát %lu byte (%lu byte được cấp phát)" #: xmalloc.c:93 #, c-format msgid "%s: cannot allocate %lu bytes" msgstr "%s: không thể cấp phát %lu byte" #: xmalloc.c:163 #, c-format msgid "%s: %s:%d: cannot allocate %lu bytes (%lu bytes allocated)" msgstr "%s: %s:%d: không thể cấp phát %lu byte (%lu byte được cấp phát)" #: xmalloc.c:165 #, c-format msgid "%s: %s:%d: cannot allocate %lu bytes" msgstr "%s: %s:%d: không thể cấp phát %lu byte" #: builtins.c:43 msgid "alias [-p] [name[=value] ... ]" msgstr "alias [-p] [TÊN[=GIÁ-TRỊ] ... ]" #: builtins.c:47 msgid "unalias [-a] name [name ...]" msgstr "unalias [-a] TÊN [TÊN ...]" #: builtins.c:51 msgid "bind [-lpvsPVS] [-m keymap] [-f filename] [-q name] [-u name] [-r keyseq] [-x keyseq:shell-command] [keyseq:readline-function or readline-command]" msgstr "bind [-lpvsPVS] [-m SƠ-ĐỒ-PHÍM] [-f TẬP-TIN] [-q TÊN] [-u TÊN] [-r DÃY-PHÍM] [-x DÃY-PHÍM:LỆNH] [DÃY-PHÍM:HÀM-READLINE hay LỆNH-READLINE]" #: builtins.c:54 msgid "break [n]" msgstr "break [n]" #: builtins.c:56 msgid "continue [n]" msgstr "continue [n]" #: builtins.c:58 msgid "builtin [shell-builtin [arg ...]]" msgstr "builtin [SHELL-BUILTIN [ĐỐI-SỐ ...]]" #: builtins.c:61 msgid "caller [expr]" msgstr "caller [BTHỨC]" #: builtins.c:64 msgid "cd [-L|[-P [-e]]] [dir]" msgstr "cd [-L|[-P [-e]]] [THƯ-MỤC]" #: builtins.c:66 msgid "pwd [-LP]" msgstr "pwd [-LP]" #: builtins.c:68 msgid ":" msgstr ":" #: builtins.c:70 msgid "true" msgstr "true" #: builtins.c:72 msgid "false" msgstr "false" #: builtins.c:74 msgid "command [-pVv] command [arg ...]" msgstr "command [-pVv] LỆNH [ĐỐI-SỐ ...]" #: builtins.c:76 msgid "declare [-aAfFgilrtux] [-p] [name[=value] ...]" msgstr "declare [-aAfFgilrtux] [-p] [TÊN[=GIÁ-TRỊ] ...]" #: builtins.c:78 msgid "typeset [-aAfFgilrtux] [-p] name[=value] ..." msgstr "typeset [-aAfFgilrtux] [-p] TÊN[=GIÁ-TRỊ] ..." #: builtins.c:80 msgid "local [option] name[=value] ..." msgstr "local [tùy_chọn] TÊN[=GIÁ-TRỊ] ..." #: builtins.c:83 msgid "echo [-neE] [arg ...]" msgstr "echo [-neE] [ĐỐI-SỐ ...]" #: builtins.c:87 msgid "echo [-n] [arg ...]" msgstr "echo [-n] [ĐỐI-SỐ ...]" #: builtins.c:90 msgid "enable [-a] [-dnps] [-f filename] [name ...]" msgstr "enable [-a] [-dnps] [-f TẬP-TIN] [TÊN ...]" #: builtins.c:92 msgid "eval [arg ...]" msgstr "eval [ĐỐI-SỐ ...]" #: builtins.c:94 msgid "getopts optstring name [arg]" msgstr "getopts CHUỖI-TÙY-CHỌN TÊN [ĐỐI-SỐ]" #: builtins.c:96 msgid "exec [-cl] [-a name] [command [arguments ...]] [redirection ...]" msgstr "exec [-cl] [-a TÊN] [LỆNH [ĐỐI-SỐ ...]] [CHUYỂN-HƯỚNG ...]" #: builtins.c:98 msgid "exit [n]" msgstr "exit [n]" #: builtins.c:100 msgid "logout [n]" msgstr "logout [n]" #: builtins.c:103 msgid "fc [-e ename] [-lnr] [first] [last] or fc -s [pat=rep] [command]" msgstr "fc [-e ENAME] [-lnr] [ĐẦU] [CUỐI] hoặc fc -s [MẪU=LẬP_LẠI] [LỆNH]" #: builtins.c:107 msgid "fg [job_spec]" msgstr "fg [ĐTCV]" #: builtins.c:111 msgid "bg [job_spec ...]" msgstr "bg [ĐTCV ...]" #: builtins.c:114 msgid "hash [-lr] [-p pathname] [-dt] [name ...]" msgstr "hash [-lr] [-p ĐƯỜNG-DẪN] [-dt] [TÊN ...]" #: builtins.c:117 msgid "help [-dms] [pattern ...]" msgstr "help [-dms] [MẪU ...]" #: builtins.c:121 msgid "history [-c] [-d offset] [n] or history -anrw [filename] or history -ps arg [arg...]" msgstr "history [-c] [-d OFFSET] [n] hay history -anrw [TẬP-TIN] hay history -ps ĐỐI-SỐ [ĐỐI-SỐ...]" #: builtins.c:125 msgid "jobs [-lnprs] [jobspec ...] or jobs -x command [args]" msgstr "jobs [-lnprs] [ĐTCV ...] hoặc jobs -x LỆNH [ĐỐI-SỐ]" #: builtins.c:129 msgid "disown [-h] [-ar] [jobspec ...]" msgstr "disown [-h] [-ar] [ĐTCV ...]" #: builtins.c:132 msgid "kill [-s sigspec | -n signum | -sigspec] pid | jobspec ... or kill -l [sigspec]" msgstr "kill [-s ĐTTH | -n số_tín_hiệu | -ĐTTH] pid | ĐTCV ... hoặc kill -l [ĐTTH]" #: builtins.c:134 msgid "let arg [arg ...]" msgstr "let ĐỐI-SỐ [ĐỐI-SỐ ...]" #: builtins.c:136 msgid "read [-ers] [-a array] [-d delim] [-i text] [-n nchars] [-N nchars] [-p prompt] [-t timeout] [-u fd] [name ...]" msgstr "read [-ers] [-a MẢNG] [-d GIỚI-HẠN] [-i VĂN-BẢN] [-n SỐ-KÝ-TỰ] [-N SỐ-KÝ-TỰ] [-p NHẮC] [-t THỜI-HẠN] [-u fd] [TÊN ...]" # nghĩa chữ #: builtins.c:138 msgid "return [n]" msgstr "return [n]" #: builtins.c:140 msgid "set [-abefhkmnptuvxBCHP] [-o option-name] [--] [arg ...]" msgstr "set [-abefhkmnptuvxBCHP] [-o TÊN-TÙY-CHỌN] [--] [ĐỐI-SỐ ...]" #: builtins.c:142 msgid "unset [-f] [-v] [name ...]" msgstr "unset [-f] [-v] [TÊN ...]" #: builtins.c:144 msgid "export [-fn] [name[=value] ...] or export -p" msgstr "export [-fn] [TÊN[=GIÁ-TRỊ] ...] hoặc export -p" #: builtins.c:146 msgid "readonly [-aAf] [name[=value] ...] or readonly -p" msgstr "readonly [-aAf] [TÊN[=GIÁ-TRỊ] ...] hay readonly -p" #: builtins.c:148 msgid "shift [n]" msgstr "shift [n]" #: builtins.c:150 msgid "source filename [arguments]" msgstr "source TẬP-TIN [ĐỐI-SỐ ...]" #: builtins.c:152 msgid ". filename [arguments]" msgstr ". TẬP-TIN [ĐỐI-SỐ ...]" #: builtins.c:155 msgid "suspend [-f]" msgstr "suspend [-f]" #: builtins.c:158 msgid "test [expr]" msgstr "test [BTHỨC]" #: builtins.c:160 msgid "[ arg... ]" msgstr "[ ĐỐI-SỐ ... ]" #: builtins.c:162 msgid "times" msgstr "times" #: builtins.c:164 msgid "trap [-lp] [[arg] signal_spec ...]" msgstr "trap [-lp] [[ĐỐI-SỐ] ĐTTH ...]" #: builtins.c:166 msgid "type [-afptP] name [name ...]" msgstr "type [-afptP] TÊN [TÊN ...]" #: builtins.c:169 msgid "ulimit [-SHacdefilmnpqrstuvx] [limit]" msgstr "ulimit [-SHacdefilmnpqrstuvx] [GIỚI-HẠN]" #: builtins.c:172 msgid "umask [-p] [-S] [mode]" msgstr "umask [-p] [-S] [CHẾ-ĐỘ]" #: builtins.c:175 msgid "wait [id]" msgstr "wait [id]" #: builtins.c:179 msgid "wait [pid]" msgstr "wait [pid]" #: builtins.c:182 msgid "for NAME [in WORDS ... ] ; do COMMANDS; done" msgstr "for TÊN [in TỪ TỪ... ;] do LỆNH; done" #: builtins.c:184 msgid "for (( exp1; exp2; exp3 )); do COMMANDS; done" msgstr "for (( BTHỨC1; BTHỨC2; BTHỨC3 )); do LỆNH; done" #: builtins.c:186 msgid "select NAME [in WORDS ... ;] do COMMANDS; done" msgstr "select TÊN [in TỪ TỪ ... ;] do LỆNH; done" #: builtins.c:188 msgid "time [-p] pipeline" msgstr "time [-p] ỐNG-DẪN" #: builtins.c:190 msgid "case WORD in [PATTERN [| PATTERN]...) COMMANDS ;;]... esac" msgstr "case TỪ in [MẪU [| MẪU]...) LỆNH ;;]... esac" #: builtins.c:192 msgid "if COMMANDS; then COMMANDS; [ elif COMMANDS; then COMMANDS; ]... [ else COMMANDS; ] fi" msgstr "if LỆNH; then LỆNH; [ elif LỆNH; then LỆNH; ]... [ else LỆNH; ] fi" #: builtins.c:194 msgid "while COMMANDS; do COMMANDS; done" msgstr "while LỆNH; do LỆNH; done" #: builtins.c:196 msgid "until COMMANDS; do COMMANDS; done" msgstr "until LỆNH; do LỆNH; done" #: builtins.c:198 msgid "coproc [NAME] command [redirections]" msgstr "coproc [TÊN] LỆNH [CHUYỂN-HƯỚNG]" #: builtins.c:200 msgid "function name { COMMANDS ; } or name () { COMMANDS ; }" msgstr "function TÊN { LỆNH ; } or TÊN () { LỆNH ; }" #: builtins.c:202 msgid "{ COMMANDS ; }" msgstr "{ LỆNH ; }" #: builtins.c:204 msgid "job_spec [&]" msgstr "ĐTCV [&]" #: builtins.c:206 msgid "(( expression ))" msgstr "(( BTHỨC ))" #: builtins.c:208 msgid "[[ expression ]]" msgstr "[[ BTHỨC ]]" #: builtins.c:210 msgid "variables - Names and meanings of some shell variables" msgstr "biến — tên và nghĩa của một số biến shell" #: builtins.c:213 msgid "pushd [-n] [+N | -N | dir]" msgstr "pushd [-n] [+N | -N | tmục]" #: builtins.c:217 msgid "popd [-n] [+N | -N]" msgstr "popd [-n] [+N | -N]" #: builtins.c:221 msgid "dirs [-clpv] [+N] [-N]" msgstr "dirs [-clpv] [+N] [-N]" #: builtins.c:224 msgid "shopt [-pqsu] [-o] [optname ...]" msgstr "shopt [-pqsu] [-o] [TÙY-CHỌN ...]" #: builtins.c:226 msgid "printf [-v var] format [arguments]" msgstr "printf [-v BIẾN] ĐỊNH-DẠNG [ĐỐI-SỐ]" #: builtins.c:229 msgid "complete [-abcdefgjksuv] [-pr] [-DE] [-o option] [-A action] [-G globpat] [-W wordlist] [-F function] [-C command] [-X filterpat] [-P prefix] [-S suffix] [name ...]" msgstr "complete [-abcdefgjksuv] [-pr] [-DE] [-o TÙY-CHỌN] [-A HÀNH-ĐỘNG] [-G MẪU-GLOB] [-W DANH-SÁCH-TỪ] [-F HÀM] [-C LỆNH] [-X MẪU-LỌC] [-P TIỀN-TỐ] [-S HẬU-TỐ] [TÊN ...]" #: builtins.c:233 msgid "compgen [-abcdefgjksuv] [-o option] [-A action] [-G globpat] [-W wordlist] [-F function] [-C command] [-X filterpat] [-P prefix] [-S suffix] [word]" msgstr "compgen [-abcdefgjksuv] [-o TÙY-CHỌN] [-A HÀNH-ĐỘNG] [-G MẪU-GLOB] [-W DANH-SÁCH-TỪ] [-F HÀM] [-C LỆNH] [-X MẪU-LỌC] [-P TIỀN-TỐ] [-S HẬU-TỐ] [TỪ]" #: builtins.c:237 msgid "compopt [-o|+o option] [-DE] [name ...]" msgstr "compopt [-o|+o TÙY-CHỌN] [-DE] [TÊN ...]" #: builtins.c:240 msgid "mapfile [-n count] [-O origin] [-s count] [-t] [-u fd] [-C callback] [-c quantum] [array]" msgstr "mapfile [-n ĐẾM] [-O GỐC] [-s SỐ-LƯỢNG] [-t] [-u fd] [-C GỌI-NGƯỢC] [-c LƯỢNG] [MẢNG]" #: builtins.c:242 msgid "readarray [-n count] [-O origin] [-s count] [-t] [-u fd] [-C callback] [-c quantum] [array]" msgstr "readarray [-n ĐẾM] [-O GỐC] [-s SỐ-LƯỢNG] [-t] [-u FD] [-C GỌI-NGƯỢC] [-c LƯỢNG] [MẢNG]" #: builtins.c:254 msgid "" "Define or display aliases.\n" " \n" " Without arguments, `alias' prints the list of aliases in the reusable\n" " form `alias NAME=VALUE' on standard output.\n" " \n" " Otherwise, an alias is defined for each NAME whose VALUE is given.\n" " A trailing space in VALUE causes the next word to be checked for\n" " alias substitution when the alias is expanded.\n" " \n" " Options:\n" " -p\tPrint all defined aliases in a reusable format\n" " \n" " Exit Status:\n" " alias returns true unless a NAME is supplied for which no alias has been\n" " defined." msgstr "" "Định nghĩa hoặc hiển thị bí danh.\n" "\n" " Không đưa ra đối số thì \"alias\" in danh sách các bí danh theo mấu\n" " \"alias TÊN=GIÁ-TRỊ\" trên đầu ra chuẩn.\n" "\n" " Có đối số thì một bí danh được định nghĩa cho mỗi TÊN theo giá trị\n" " đưa ra. Khoảng trắng ở đâu trong GIÁ-TRỊ làm kiểm tra thay thế bí\n" " danh cho từ kế tiếp, khi phân giải bí danh.\n" "\n" " Tùy chọn:\n" " -p\tin tất cả các bí danh được định nghĩa theo định dạng\n" " \tcó thể dùng lại được\n" "\n" " Trạng thái thoát:\n" " alias trả lại thành công trừ khi TÊN được cung cấp không phải là\n" " một bí danh được định nghĩa" #: builtins.c:276 msgid "" "Remove each NAME from the list of defined aliases.\n" " \n" " Options:\n" " -a\tremove all alias definitions.\n" " \n" " Return success unless a NAME is not an existing alias." msgstr "" "Gỡ bỏ TÊN khỏi danh sách các bí danh.\n" "\n" " Tùy chọn:\n" " -a\tbỏ tất cả các bí danh.\n" "\n" " Trả lại thành công trừ khi TÊN không phải là một bí danh." #: builtins.c:289 msgid "" "Set Readline key bindings and variables.\n" " \n" " Bind a key sequence to a Readline function or a macro, or set a\n" " Readline variable. The non-option argument syntax is equivalent to\n" " that found in ~/.inputrc, but must be passed as a single argument:\n" " e.g., bind '\"\\C-x\\C-r\": re-read-init-file'.\n" " \n" " Options:\n" " -m keymap Use KEYMAP as the keymap for the duration of this\n" " command. Acceptable keymap names are emacs,\n" " emacs-standard, emacs-meta, emacs-ctlx, vi, vi-move,\n" " vi-command, and vi-insert.\n" " -l List names of functions.\n" " -P List function names and bindings.\n" " -p List functions and bindings in a form that can be\n" " reused as input.\n" " -S List key sequences that invoke macros and their values\n" " -s List key sequences that invoke macros and their values\n" " in a form that can be reused as input.\n" " -V List variable names and values\n" " -v List variable names and values in a form that can\n" " be reused as input.\n" " -q function-name Query about which keys invoke the named function.\n" " -u function-name Unbind all keys which are bound to the named function.\n" " -r keyseq Remove the binding for KEYSEQ.\n" " -f filename Read key bindings from FILENAME.\n" " -x keyseq:shell-command\tCause SHELL-COMMAND to be executed when\n" " \t\t\t\tKEYSEQ is entered.\n" " \n" " Exit Status:\n" " bind returns 0 unless an unrecognized option is given or an error occurs." msgstr "" "Đặt các tổ hợp phím và biến Readline.\n" "\n" " Gắn tổ hợp phím với một chức năng hay vĩ lệnh Readline, hoặc\n" " đặt biến Readline. Cú pháp đối số không tùy chọn giống như trong\n" " ~/.inputrc, nhưng phải được gửi dưới dạng đối số đơn. Ví\n" " dụ: bind '\"\\C-x\\C-r\": re-read-init-file'.\n" "\n" " Tùy chọn:\n" " -m SƠ-ĐỒ-PHÍM dùng sơ_đồ_phím làm sơ đồ phím khi lệnh này\n" " chạy. Giá trị hợp lệ là emacs, emacs-standard,\n" " emacs-meta, emacs-ctlx, vi, vi-move, vi-command\n" " và vi-insert.\n" " -l liệt kê tên chức năng\n" " -P liệt kê tên chức năng và tổ hợp phím\n" " -p liệt kê tên chức năng và tổ hợp phím theo dạng dùng\n" " lại làm đầu vào được\n" " -S liệt kê chuỗi phím để gọi vĩ lệnh và giá trị tương ứng\n" " -s liệt kê chuỗi phím để gọi vĩ lệnh và giá trị tương ứng\n" " theo định dạng có thể dùng lại làm đầu vào được\n" " -q TÊN\t\thỏi phím nào gọi chức năng này\n" " -u TÊN\t\tgỡ bỏ tất cả phím tắt gắn với chức năng này\n" " -r DÃY-PHÍM gỡ bỏ tổ hợp phím này\n" " -f TẬP-TIN\tđọc tổ hợp phím từ tập tin này\n" " -x DÃY-PHÍM:LỆNH chạy LỆNH khi nhập DÃY-PHÍM\n" "\n" " Trạng thái thoát:\n" " bind trả lại 0 trừ khi đưa ra tùy chọn không nhận ra hay gặp lỗi." #: builtins.c:326 msgid "" "Exit for, while, or until loops.\n" " \n" " Exit a FOR, WHILE or UNTIL loop. If N is specified, break N enclosing\n" " loops.\n" " \n" " Exit Status:\n" " The exit status is 0 unless N is not greater than or equal to 1." msgstr "" "Thoát khỏi vòng lặp for, while hoặc until.\n" "\n" " Thoát khỏi vòng lặp for, while hoặc until. Nếu xác định N thì\n" " thoát N vòng lặp.\n" "\n" " Trạng thái thoát:\n" " Trạng thái thoát là 0 trừ khi N nhỏ hơn 1." #: builtins.c:338 msgid "" "Resume for, while, or until loops.\n" " \n" " Resumes the next iteration of the enclosing FOR, WHILE or UNTIL loop.\n" " If N is specified, resumes the Nth enclosing loop.\n" " \n" " Exit Status:\n" " The exit status is 0 unless N is not greater than or equal to 1." msgstr "" "Tiếp tục lại chạy vòng lặp for, while hoặc until.\n" "\n" " Tiếp tục lại chạy vòng lặp for, while hoặc until. Nếu xác định N\n" " thì tiếp tục vòng lặp thứ N.\n" "\n" " Trạng thái thoát:\n" " Trạng thái thoát là 0 trừ khi N nhỏ hơn 1." #: builtins.c:350 msgid "" "Execute shell builtins.\n" " \n" " Execute SHELL-BUILTIN with arguments ARGs without performing command\n" " lookup. This is useful when you wish to reimplement a shell builtin\n" " as a shell function, but need to execute the builtin within the function.\n" " \n" " Exit Status:\n" " Returns the exit status of SHELL-BUILTIN, or false if SHELL-BUILTIN is\n" " not a shell builtin.." msgstr "" "Chạy lệnh dựng sẵn shell.\n" "\n" " Chạy SHELL-BUILTIN với ĐỐI-SỐ mà không thực hiện tìm lệnh. Hữu ích\n" " khi bạn muốn cài đặt lại lệnh shell dựng sẵn dạng hàm shell, nhưng\n" " cần chạy lệnh dựng sẵn trong hàm đó.\n" "\n" " Trạng thái thoát:\n" " Trả lại trạng thái thoát của SHELL-BUILTIN, hoặc sai nếu\n" " SHELL-BUILTIN không phải là một lệnh dựng sẵn shell." #: builtins.c:365 msgid "" "Return the context of the current subroutine call.\n" " \n" " Without EXPR, returns \"$line $filename\". With EXPR, returns\n" " \"$line $subroutine $filename\"; this extra information can be used to\n" " provide a stack trace.\n" " \n" " The value of EXPR indicates how many call frames to go back before the\n" " current one; the top frame is frame 0.\n" " \n" " Exit Status:\n" " Returns 0 unless the shell is not executing a shell function or EXPR\n" " is invalid." msgstr "" "Trả về ngữ cảnh của lệnh gọi hàm hiện thời.\n" "\n" " Không có BTHỨC thì trả lại \"$line $filename\". Có BTHỨC thì trả\n" " lại \"$line $subroutine $filename\"; thông tin bổ sung này có thể\n" " được dùng để cung cấp stack trace.\n" "\n" " Giá trị của BTHỨC thì ngụ ý bao nhiêu lần gọi cần lùi lại đằng\n" " trước lệnh gọi hiện tại; khung gọi đầu là khung 0.\n" "\n" " Trạng thái thoát:\n" " Trả lại 0 trừ khi shell đang chạy hàm shell, BTHỨC cũng hợp lệ." #: builtins.c:383 msgid "" "Change the shell working directory.\n" " \n" " Change the current directory to DIR. The default DIR is the value of the\n" " HOME shell variable.\n" " \n" " The variable CDPATH defines the search path for the directory containing\n" " DIR. Alternative directory names in CDPATH are separated by a colon (:).\n" " A null directory name is the same as the current directory. If DIR begins\n" " with a slash (/), then CDPATH is not used.\n" " \n" " If the directory is not found, and the shell option `cdable_vars' is set,\n" " the word is assumed to be a variable name. If that variable has a value,\n" " its value is used for DIR.\n" " \n" " Options:\n" " -L\tforce symbolic links to be followed\n" " -P\tuse the physical directory structure without following symbolic\n" " \tlinks\n" " -e\tif the -P option is supplied, and the current working directory\n" " \tcannot be determined successfully, exit with a non-zero status\n" " \n" " The default is to follow symbolic links, as if `-L' were specified.\n" " \n" " Exit Status:\n" " Returns 0 if the directory is changed, and if $PWD is set successfully when\n" " -P is used; non-zero otherwise." msgstr "" "Đổi thư mục làm việc của shell.\n" " \n" " Chuyển đổi thư mục hiện thời sang THƯ-MỤC. Thư mục mặc định là giá\n" " trị của biến HOME.\n" " \n" " Biến CDPATH xác định đường dẫn tìm kiếm cho thư mục chứa\n" " THƯ-MỤC. Tên thư mục trong CDPATH được phân cách bằng dấu hai chấm\n" " (:). Tên thư mục trống tương đương với thư mục hiện tại. Nếu\n" " THƯ-MỤC bắt đầu với dấu chéo (/) thì không dùng CDPATH.\n" " \n" " Nếu không tìm thấy thư mục, và biến `cdable_vars' được đặt,\n" " thì lệnh sẽ giả định là một tên biến. Nếu biến đó có giá trị,\n" " thì giá trị này được dùng cho THƯ-MỤC.\n" " \n" " Tùy chọn:\n" " -L\tbuộc theo liên kết tượng trưng\n" " -P\tdùng cấu trúc thư mục vật lý mà không theo liên kết tượng trưng\n" " -e\tnếu có tùy chọn -P và không thể xác định thư mục làm việc\n" " \thiện hành, thoát với trạng thái khác không\n" "\n" " Mặc định là theo liên kết tượng trưng, như có tùy chọn `-L'.\n" " \n" " Trạng thái thoát:\n" " Trả về 0 nếu thay đổi thư mục, và nếu $PWD được đặt thành công khi\n" " -P được sử dụng; không thì khác không." #: builtins.c:414 msgid "" "Print the name of the current working directory.\n" " \n" " Options:\n" " -L\tprint the value of $PWD if it names the current working\n" " \tdirectory\n" " -P\tprint the physical directory, without any symbolic links\n" " \n" " By default, `pwd' behaves as if `-L' were specified.\n" " \n" " Exit Status:\n" " Returns 0 unless an invalid option is given or the current directory\n" " cannot be read." msgstr "" "In tên thư mục hiện thời.\n" "\n" " Tùy chọn:\n" " -L\tin $PWD nếu nó chứa tên của thư mục hiện thời\n" " -P\tin thư mục vật lý, không liên kết biểu tượng\n" "\n" " Mặc định \"pwd\" chạy như có \"-L\".\n" "\n" " Trạng thái thoát:\n" " Trả lại 0 trừ khi đưa ra tùy chọn sai hoặc đọc được thư mục hiện\n" " thời." #: builtins.c:431 msgid "" "Null command.\n" " \n" " No effect; the command does nothing.\n" " \n" " Exit Status:\n" " Always succeeds." msgstr "" "Câu lệnh vô giá trị.\n" "\n" " Không có hiệu ứng: câu lệnh không làm gì.\n" "\n" " Trạng thái thoát:\n" " Lúc nào cũng thành công." #: builtins.c:442 msgid "" "Return a successful result.\n" " \n" " Exit Status:\n" " Always succeeds." msgstr "" "Trả lại kết quả thành công.\n" "\n" " Trạng thái thoát:\n" " Lúc nào cũng thành công." #: builtins.c:451 msgid "" "Return an unsuccessful result.\n" " \n" " Exit Status:\n" " Always fails." msgstr "" "Trả về kết quả không thành công.\n" "\n" " Trạng thái thoát:\n" " Lúc nào cũng không thành công." #: builtins.c:460 msgid "" "Execute a simple command or display information about commands.\n" " \n" " Runs COMMAND with ARGS suppressing shell function lookup, or display\n" " information about the specified COMMANDs. Can be used to invoke commands\n" " on disk when a function with the same name exists.\n" " \n" " Options:\n" " -p\tuse a default value for PATH that is guaranteed to find all of\n" " \tthe standard utilities\n" " -v\tprint a description of COMMAND similar to the `type' builtin\n" " -V\tprint a more verbose description of each COMMAND\n" " \n" " Exit Status:\n" " Returns exit status of COMMAND, or failure if COMMAND is not found." msgstr "" "Thực thi một lệnh đơn giản, hoặc hiển thị thông tin về lệnh.\n" "\n" " Chạy LỆNH với các ĐỐI-SỐ mà không thực hiện tra cứu hàm shell,\n" " hoặc hiển thị thông tin về LỆNH. Có thể được dùng để gọi lệnh trên\n" " đĩa khi đã có hàm cùng tên.\n" "\n" " Tùy chọn:\n" " -p\tdùng giá trị mặc định cho ĐƯỜNG_DẪN\n" " \tmà chắc chắn sẽ tìm mọi tiện ích chuẩn\n" " -v\tin mô tả về LỆNH mà tương tự như lệnh dựng sẵn \"type\"\n" " -V\tin mô tả chi tiết hơn của mỗi LỆNH\n" "\n" " Trạng thái thoát:\n" " Trả lại trạng thái thoát của LỆNH, hoặc thất bại nếu không tìm\n" " thấy LỆNH." #: builtins.c:479 msgid "" "Set variable values and attributes.\n" " \n" " Declare variables and give them attributes. If no NAMEs are given,\n" " display the attributes and values of all variables.\n" " \n" " Options:\n" " -f\trestrict action or display to function names and definitions\n" " -F\trestrict display to function names only (plus line number and\n" " \tsource file when debugging)\n" " -g\tcreate global variables when used in a shell function; otherwise\n" " \tignored\n" " -p\tdisplay the attributes and value of each NAME\n" " \n" " Options which set attributes:\n" " -a\tto make NAMEs indexed arrays (if supported)\n" " -A\tto make NAMEs associative arrays (if supported)\n" " -i\tto make NAMEs have the `integer' attribute\n" " -l\tto convert NAMEs to lower case on assignment\n" " -r\tto make NAMEs readonly\n" " -t\tto make NAMEs have the `trace' attribute\n" " -u\tto convert NAMEs to upper case on assignment\n" " -x\tto make NAMEs export\n" " \n" " Using `+' instead of `-' turns off the given attribute.\n" " \n" " Variables with the integer attribute have arithmetic evaluation (see\n" " the `let' command) performed when the variable is assigned a value.\n" " \n" " When used in a function, `declare' makes NAMEs local, as with the `local'\n" " command. The `-g' option suppresses this behavior.\n" " \n" " Exit Status:\n" " Returns success unless an invalid option is supplied or an error occurs." msgstr "" "Đặt giá trị và thuộc tính biến.\n" "\n" " Khai báo biến và gán cho thuộc tính cho nó. Nếu không đưa TÊN thì\n" " hiển thị thuộc tính và giá trị của mọi biến.\n" "\n" " Tùy chọn:\n" " -f\thạn chế hành động hoặc hiển thị chỉ tên hàm và định nghĩa\n" " -F\thạn chế hiển thị chỉ tên hàm mà thôi\n" " \t(và số thứ tự dòng và tập tin nguồn khi gỡ lỗi)\n" " -g\ttạo biến toàn cục khi sử dụng trong hàm shell; nếu không\n" " \tthì bị bỏ qua\n" " -p\thiển thị thuộc tính và giá trị của mỗi TÊN\n" "\n" " Tùy chọn dùng để đặt thuộc tính:\n" " -a\ttạo mảng chỉ số tên TÊN (nếu hỗ trợ)\n" " -A\ttạo mảng kết hợp tên TÊN (nếu hỗ trợ)\n" " -i\tđặt thuộc tính `integer' (số nguyên) cho TÊN\n" " -l\tchuyển đổi TÊN sang chữ thường khi gán\n" " -r\tđặt TÊN là chỉ đọc\n" " -t\tđặt thuộc tính `trace' cho TÊN\n" " -u\tchuyển đổi TÊN sang chữ hoa khi gán\n" " -x\txuất khẩu TÊN\n" "\n" " Dùng `+' thay cho `-' để tắt thuộc tính đưa ra.\n" "\n" " Biến có thuộc tính số nguyên thì định giá theo số học (xem lệnh\n" " `let') khi biến được gán.\n" "\n" " Khi dùng trong hàm, `declare' đặt TÊN là cục bộ, như khi dùng lệnh\n" " `local' (cục bộ). Tùy chọn -g ngăn hành vi này.\n" "\n" " Trạng thái thoát:\n" " Trả lại thành công trừ khi đưa ra tùy chọn sai hoặc gặp lỗi." #: builtins.c:517 msgid "" "Set variable values and attributes.\n" " \n" " Obsolete. See `help declare'." msgstr "" "Đặt giá trị và thuộc tính của biến.\n" "\n" " Lỗi thời. Xem \"help declare\"." #: builtins.c:525 msgid "" "Define local variables.\n" " \n" " Create a local variable called NAME, and give it VALUE. OPTION can\n" " be any option accepted by `declare'.\n" " \n" " Local variables can only be used within a function; they are visible\n" " only to the function where they are defined and its children.\n" " \n" " Exit Status:\n" " Returns success unless an invalid option is supplied, an error occurs,\n" " or the shell is not executing a function." msgstr "" "Định nghĩa biến cục bộ.\n" "\n" " Tạo biến cục bộ tên TÊN và gán GIÁ-TRỊ cho nó. TÙY_CHỌN có thể là\n" " bất cứ tùy chọn nào \"declare\" chấp nhận.\n" "\n" " Biến cục bộ chỉ dùng được bên trong hàm, chỉ truy cập được từ hàm\n" " mà biến được định nghĩa và các hàm con.\n" "\n" " Trạng thái thoát:\n" " Trả lại thành công trừ khi đưa ra tùy chọn sai hay gặp lỗi,\n" " hoặc nếu shell không chạy hàm." #: builtins.c:542 msgid "" "Write arguments to the standard output.\n" " \n" " Display the ARGs on the standard output followed by a newline.\n" " \n" " Options:\n" " -n\tdo not append a newline\n" " -e\tenable interpretation of the following backslash escapes\n" " -E\texplicitly suppress interpretation of backslash escapes\n" " \n" " `echo' interprets the following backslash-escaped characters:\n" " \\a\talert (bell)\n" " \\b\tbackspace\n" " \\c\tsuppress further output\n" " \\e\tescape character\n" " \\f\tform feed\n" " \\n\tnew line\n" " \\r\tcarriage return\n" " \\t\thorizontal tab\n" " \\v\tvertical tab\n" " \\\\\tbackslash\n" " \\0nnn\tthe character whose ASCII code is NNN (octal). NNN can be\n" " \t0 to 3 octal digits\n" " \\xHH\tthe eight-bit character whose value is HH (hexadecimal). HH\n" " \tcan be one or two hex digits\n" " \n" " Exit Status:\n" " Returns success unless a write error occurs." msgstr "" "Ghi đối số vào đầu ra chuẩn.\n" "\n" " Hiển thị ĐỐI-SỐ trên đầu ra chuẩn, kèm ký tự xuống hàng ở cuối.\n" "\n" " Tùy chọn:\n" " -n\tđừng thêm ký tự xuống hàng\n" " -e\tbật diễn dịch ký tự thoát theo sau ký tự '\\'\n" " -E\tchặn diễn dịch ký tự thoát\n" "\n" " \"echo\" hiểu những ký tự thoát sau:\n" " \\a\tchuông báo\n" " \\b\txoá lùi\n" " \\c\tchặn kết xuất tiếp\n" " \\e\tký tự thoát\n" " \\f\tnạp giấy\n" " \\n\tdòng mới\n" " \\r\txuống dòng\n" " \\0nnn\tký tự có mã ASCII NNN (1-3 chữ số bát phân)\n" " \\xHH\tký tự 8-bit có giá trị HH (1-2 chữ số thập lục phân)\n" "\n" " Trạng thái thoát:\n" " Trả lại thành công nếu không gặp lỗi ghi." #: builtins.c:576 msgid "" "Write arguments to the standard output.\n" " \n" " Display the ARGs on the standard output followed by a newline.\n" " \n" " Options:\n" " -n\tdo not append a newline\n" " \n" " Exit Status:\n" " Returns success unless a write error occurs." msgstr "" "Ghi đối số vào đầu ra chuẩn.\n" "\n" " Hiển thị ĐỐI-SỐ trên đầu ra chuẩn, kèm ký tự xuống hàng ở cuối.\n" "\n" " Tùy chọn:\n" " -n\tđừng thêm ký tự xuống hàng\n" "\n" " Trạng thái thoát:\n" " Trả lại thành công nếu không gặp lỗi ghi." #: builtins.c:591 msgid "" "Enable and disable shell builtins.\n" " \n" " Enables and disables builtin shell commands. Disabling allows you to\n" " execute a disk command which has the same name as a shell builtin\n" " without using a full pathname.\n" " \n" " Options:\n" " -a\tprint a list of builtins showing whether or not each is enabled\n" " -n\tdisable each NAME or display a list of disabled builtins\n" " -p\tprint the list of builtins in a reusable format\n" " -s\tprint only the names of Posix `special' builtins\n" " \n" " Options controlling dynamic loading:\n" " -f\tLoad builtin NAME from shared object FILENAME\n" " -d\tRemove a builtin loaded with -f\n" " \n" " Without options, each NAME is enabled.\n" " \n" " To use the `test' found in $PATH instead of the shell builtin\n" " version, type `enable -n test'.\n" " \n" " Exit Status:\n" " Returns success unless NAME is not a shell builtin or an error occurs." msgstr "" "Bật và tắt lệnh shell dựng sẵn.\n" "\n" " Bật và tắt các lệnh shell dựng sẵn. Chức năng tắt cho phép bạn\n" " chạy một lệnh trên đĩa cùng tên với một lệnh shell dựng sẵn mà\n" " không cần dùng tên đường dẫn đầy đủ.\n" "\n" " Tùy chọn:\n" " -a in danh sách các lệnh dựng sẵn kèm trạng thái bật/tắt\n" " -n tắt TÊN hoặc hiển thị danh sách lệnh bị tắt\n" " -p in danh sách lệnh dựng sẵn theo định dạng dùng lại được\n" " -s chỉ in tên các lệnh dựng sẵn Posix `đặc biệt'\n" "\n" " Tùy chọn điều khiển chức năng nạp động:\n" " -f nạp lệnh dựng sẵn TÊN từ tập tin TẬP-TIN\n" " -d bỏ một dựng sẵn được nạp bằng `-f'\n" "\n" " Không có tùy chọn thì coi như bật TÊN.\n" "\n" " Để sử dụng lệnh `test' trên đĩa (nếu tìm thấy trong $PATH) thay\n" " cho phiên bản shell dựng sẵn, gõ `enable -n test'.\n" "\n" " Trạng thái thoát:\n" " Trả lại thành công trừ khi TÊN không phải lệnh dựng sẵn hoặc gặp lỗi." #: builtins.c:619 msgid "" "Execute arguments as a shell command.\n" " \n" " Combine ARGs into a single string, use the result as input to the shell,\n" " and execute the resulting commands.\n" " \n" " Exit Status:\n" " Returns exit status of command or success if command is null." msgstr "" "Dùng các đối số để chạy lệnh shell.\n" "\n" " Gộp các ĐỐI-SỐ thành một chuỗi đơn, dùng kết quả làm đầu vào cho\n" " shell và chạy lệnh đó.\n" "\n" " Trạng thái thoát:\n" " Trả lại trạng thái thoát của câu lệnh hay thành công nếu lệnh rỗng." #: builtins.c:631 msgid "" "Parse option arguments.\n" " \n" " Getopts is used by shell procedures to parse positional parameters\n" " as options.\n" " \n" " OPTSTRING contains the option letters to be recognized; if a letter\n" " is followed by a colon, the option is expected to have an argument,\n" " which should be separated from it by white space.\n" " \n" " Each time it is invoked, getopts will place the next option in the\n" " shell variable $name, initializing name if it does not exist, and\n" " the index of the next argument to be processed into the shell\n" " variable OPTIND. OPTIND is initialized to 1 each time the shell or\n" " a shell script is invoked. When an option requires an argument,\n" " getopts places that argument into the shell variable OPTARG.\n" " \n" " getopts reports errors in one of two ways. If the first character\n" " of OPTSTRING is a colon, getopts uses silent error reporting. In\n" " this mode, no error messages are printed. If an invalid option is\n" " seen, getopts places the option character found into OPTARG. If a\n" " required argument is not found, getopts places a ':' into NAME and\n" " sets OPTARG to the option character found. If getopts is not in\n" " silent mode, and an invalid option is seen, getopts places '?' into\n" " NAME and unsets OPTARG. If a required argument is not found, a '?'\n" " is placed in NAME, OPTARG is unset, and a diagnostic message is\n" " printed.\n" " \n" " If the shell variable OPTERR has the value 0, getopts disables the\n" " printing of error messages, even if the first character of\n" " OPTSTRING is not a colon. OPTERR has the value 1 by default.\n" " \n" " Getopts normally parses the positional parameters ($0 - $9), but if\n" " more arguments are given, they are parsed instead.\n" " \n" " Exit Status:\n" " Returns success if an option is found; fails if the end of options is\n" " encountered or an error occurs." msgstr "" "Phân tích đối số tùy chọn.\n" "\n" " Getopts được shell dùng để phân tích tham số thành tuỳ chọn.\n" "\n" " CHUỖI-TUỲ-CHỌN chứa những chữ tùy chọn cần nhận ra; một chữ có dấu hai\n" " chấm theo sau thì tùy chọn cần đối số, cách tuỳ chọn bằng khoảng\n" " trắng.\n" "\n" " Mỗi lần gọi, getopts sẽ đặt tùy chọn kế tiếp vào biến shell $TÊN,\n" " tạo biến mới nếu tên đó chưa tồn tại, và đặt chỉ mục của đối số kế\n" " tiếp cần xử lý vào biến shell OPTIND. OPTIND được khởi động bằng 1\n" " mỗi lần shell hay một văn lệnh shell được gọi. Khi tùy chọn cần\n" " đối số, getopts đặt đối số đó vào biến shell OPTARG.\n" "\n" " getopts thông báo lỗi bằng một trong hai cách. Nếu ký tự đầu tiên\n" " của CHUỖI-TUỲ-CHỌN là dấu hai chấm, getopts thông báo lỗi im\n" " lặng. Chế độ này không in ra thông báo nào. Nếu gặp tùy chọn sai\n" " thì getopts lưu mã ký tự tuỳ chọn trong biến OPTARG. Không tìm\n" " thấy đối số cần thiết thì getopts lưu dấu hai chấm trong biến $TÊN\n" " và đặt lưu mã ký tự tuỳ chọn trong OPTARG. Nếu getopts không trong\n" " chế độ im lặng và gặp tùy chọn sai, getopts lưu dấu hỏi `?' vào\n" " biến $TÊN và xoá OPTARG. Không tìm thấy tùy chọn cần thiết thì `?'\n" " được lưu vào $TÊN, OPTARG bị xlá, và in ra một thông điệp chẩn\n" " đoán.\n" "\n" " Nếu biến shell OPTERR có giá trị 0, getopts sẽ không in thông báo\n" " kể cả khi ký tự đầu tiên của CHUỖI-TUỲ-CHỌN không phải dấu hai\n" " chấm. OPTERR có giá trị mặc định là 1.\n" "\n" " Getopts bình thường phân tích tham số vị trí ($0 - $9). Tuy nhiên,\n" " các đối số bổ sung cũng được phân tích.\n" "\n" " Trạng thái thoát:\n" " Trả lại thành công nếu tìm thấy một tùy chọn; không thành công nếu\n" " gặp kết thúc các tùy chọn, hoặc nếu gặp lỗi." #: builtins.c:673 msgid "" "Replace the shell with the given command.\n" " \n" " Execute COMMAND, replacing this shell with the specified program.\n" " ARGUMENTS become the arguments to COMMAND. If COMMAND is not specified,\n" " any redirections take effect in the current shell.\n" " \n" " Options:\n" " -a name\tpass NAME as the zeroth argument to COMMAND\n" " -c\t\texecute COMMAND with an empty environment\n" " -l\t\tplace a dash in the zeroth argument to COMMAND\n" " \n" " If the command cannot be executed, a non-interactive shell exits, unless\n" " the shell option `execfail' is set.\n" " \n" " Exit Status:\n" " Returns success unless COMMAND is not found or a redirection error occurs." msgstr "" "Thay thế shell bằng câu lệnh đưa ra.\n" "\n" " Thực thi LỆNH, thay thế shell này bằng chương trình được chạy.\n" " ĐỐI-SỐ là đối số của LỆNH. Không xác định LỆNH thì bất cứ chuyển\n" " hướng nào sẽ xảy ra trong shell đang chạy.\n" "\n" " Tùy chọn:\n" " -a TÊN\ttruyền TÊN cho LỆNH dạng đối số thứ không\n" " -c\tthực thi LỆNH với một môi trường rỗng\n" " -l\tđặt một dấu gạch vào đối số thứ không của LỆNH\n" "\n" " Nếu LỆNH không thể thực thi, shell không tương tác sẽ thoát, trừ\n" " khi đặt tùy chọn shell `execfail'.\n" "\n" " Trạng thái thoát:\n" " Trả lại thành công trừ khi không tìm được LỆNH hoặc gặp lỗi chuyển hướng." #: builtins.c:694 msgid "" "Exit the shell.\n" " \n" " Exits the shell with a status of N. If N is omitted, the exit status\n" " is that of the last command executed." msgstr "" "Thoát shell.\n" "\n" " Thoát khỏi shell với trạng thái N. Không xác định N thì trạng thái\n" " thoát là trạng thái của lệnh cuối cùng được chạy." #: builtins.c:703 msgid "" "Exit a login shell.\n" " \n" " Exits a login shell with exit status N. Returns an error if not executed\n" " in a login shell." msgstr "" "Thoát shell đăng nhập.\n" "\n" " Thoát khỏi shell đăng nhập với trạng thái N. Trả về lỗi nếu không\n" " phải shell đăng nhập." #: builtins.c:713 msgid "" "Display or execute commands from the history list.\n" " \n" " fc is used to list or edit and re-execute commands from the history list.\n" " FIRST and LAST can be numbers specifying the range, or FIRST can be a\n" " string, which means the most recent command beginning with that\n" " string.\n" " \n" " Options:\n" " -e ENAME\tselect which editor to use. Default is FCEDIT, then EDITOR,\n" " \t\tthen vi\n" " -l \tlist lines instead of editing\n" " -n\tomit line numbers when listing\n" " -r\treverse the order of the lines (newest listed first)\n" " \n" " With the `fc -s [pat=rep ...] [command]' format, COMMAND is\n" " re-executed after the substitution OLD=NEW is performed.\n" " \n" " A useful alias to use with this is r='fc -s', so that typing `r cc'\n" " runs the last command beginning with `cc' and typing `r' re-executes\n" " the last command.\n" " \n" " Exit Status:\n" " Returns success or status of executed command; non-zero if an error occurs." msgstr "" "Hiển thị hoặc thực thi lệnh từ lược sử.\n" "\n" " fc được dùng để liệt kê, chỉnh sửa và thực thi lại lệnh từ danh\n" " sách lược sử. ĐẦU và CUỐI có thể là số xác định phạm vi, hoặc ĐẦU\n" " có thể là chuỗi chứa phần đầu lệnh chạy gần đây nhất.\n" "\n" " Tùy chọn:\n" " -e ENAME\tchọn trình soạn thảo nào cần dùng.\n" " \tMặc định là FCEDIT, rồi EDITOR, rồi vi\n" " -l\tliệt kê thay vì chỉnh sửa\n" " -n\tliệt kê không in số thứ tự dòng\n" " -r\tđảo ngược thứ tự các dòng (mới nhất trước)\n" "\n" " Định dạng `fc -s [mẫu=lần_lập_lại ...] [lệnh]' được dùng để chạy\n" " lại lệnh sau khi thay thế CŨ=MỚI.\n" "\n" " Một bí danh hữu ích là r='fc -s' để có thể gõ `r cc' để chạy lệnh\n" " cuối cùng bắt đầu bằng `cc' và gõ `r' để chạy lại lệnh cuối.\n" "\n" " Trạng thái thoát:\n" " Trả lại thành công hay trạng thái của câu lệnh được thực thi; gặp\n" " lỗi thì khác số không." #: builtins.c:743 msgid "" "Move job to the foreground.\n" " \n" " Place the job identified by JOB_SPEC in the foreground, making it the\n" " current job. If JOB_SPEC is not present, the shell's notion of the\n" " current job is used.\n" " \n" " Exit Status:\n" " Status of command placed in foreground, or failure if an error occurs." msgstr "" "Nâng công việc nền lên trước.\n" "\n" " Nâng lên trước công việc được xác định bởi đặc tả công việc ĐTCV\n" " làm công việc hiện thời. Không có ĐTCV thì dùng công việc hiện\n" " thời của shell.\n" "\n" " Trạng thái thoát:\n" " Trạng thái của câu lệnh được nâng lên trước; hoặc thất bại nếu xảy\n" " ra lỗi." #: builtins.c:758 msgid "" "Move jobs to the background.\n" " \n" " Place the jobs identified by each JOB_SPEC in the background, as if they\n" " had been started with `&'. If JOB_SPEC is not present, the shell's notion\n" " of the current job is used.\n" " \n" " Exit Status:\n" " Returns success unless job control is not enabled or an error occurs." msgstr "" "Chuyển công việc xuống chạy nền.\n" "\n" " Chuyển công việc xác định theo đặc tả công việc ĐTCV sang chạy\n" " nền, như thể lệnh được chạy với `&'. Nếu không có ĐTCV, dùng công\n" " việc hiện thời của shell.\n" "\n" " Trạng thái thoát:\n" " Trả lại thành công nếu chức năng điều khiển công việc được bật và\n" " không gặp lỗi." #: builtins.c:772 msgid "" "Remember or display program locations.\n" " \n" " Determine and remember the full pathname of each command NAME. If\n" " no arguments are given, information about remembered commands is displayed.\n" " \n" " Options:\n" " -d\t\tforget the remembered location of each NAME\n" " -l\t\tdisplay in a format that may be reused as input\n" " -p pathname\tuse PATHNAME is the full pathname of NAME\n" " -r\t\tforget all remembered locations\n" " -t\t\tprint the remembered location of each NAME, preceding\n" " \t\teach location with the corresponding NAME if multiple\n" " \t\tNAMEs are given\n" " Arguments:\n" " NAME\t\tEach NAME is searched for in $PATH and added to the list\n" " \t\tof remembered commands.\n" " \n" " Exit Status:\n" " Returns success unless NAME is not found or an invalid option is given." msgstr "" "Nhớ hoặc hiển thị vị trí chương trình.\n" "\n" " Xác định và ghi nhớ tên đường dẫn đầy đủ của mỗi TÊN câu lệnh.\n" " Nếu không đưa ra đối số, hiển thị thông tin về các câu lệnh được\n" " ghi nhớ.\n" "\n" " Tùy chọn:\n" " -d\t\tquên vị trí đã nhớ của TÊN\n" " -l\t\thiển thị theo định dạng dùng lại làm đầu\n" " \t\tvào được\n" " -p TÊN_ĐƯỜNG_DẪN\tdùng TÊN_ĐƯỜNG_DẪN là tên đường dẫn đầy đủ của TÊN\n" " -r\t\tquên mọi vị trí đã nhớ\n" " -t\t\tin vị trí đã nhớ của TÊN, in tên trước vị\n" " trí nếu TÊN tương ứng với nhiều vị trí\n" "\n" " Đối số:\n" " TÊN\t\tmỗi TÊN được tìm trong $PATH và được thêm vào\n" " \t\tdanh sách các câu lệnh được ghi nhớ.\n" "\n" " Trạng thái thoát:\n" " Trả lại thành công nếu tìm được TÊN và không đưa ra tùy chọn sai." #: builtins.c:797 msgid "" "Display information about builtin commands.\n" " \n" " Displays brief summaries of builtin commands. If PATTERN is\n" " specified, gives detailed help on all commands matching PATTERN,\n" " otherwise the list of help topics is printed.\n" " \n" " Options:\n" " -d\toutput short description for each topic\n" " -m\tdisplay usage in pseudo-manpage format\n" " -s\toutput only a short usage synopsis for each topic matching\n" " \tPATTERN\n" " \n" " Arguments:\n" " PATTERN\tPattern specifiying a help topic\n" " \n" " Exit Status:\n" " Returns success unless PATTERN is not found or an invalid option is given." msgstr "" "Hiển thị thông tin về lệnh dựng sẵn.\n" "\n" " Hiển thị bản tóm tắt ngắn về các câu lệnh dựng sẵn. Nếu cũng ghi\n" " rõ MẪU thì in ra trợ giúp chi tiết về tất cả các câu lệnh tương\n" " ứng với mẫu đó ; không thì in ra danh sách các chủ đề trợ giúp.\n" "\n" " Tùy chọn:\n" " -d\txuất mô tả ngắn về mỗi chủ đề\n" " -m\thiệnn cách dùng theo định dạng trang hướng dẫn (man)\n" " -s\txuất chỉ một bản tóm tắt cách dìng cho mỗi\n" " \tchủ đề tương ứng với MẪU\n" "\n" " Đối số:\n" " MẪU\tmẫu các định một chủ đề trợ giúp\n" "\n" " Trạng thái thoát:\n" " Trả lại thành công nếu tìm được MẪU và không đưa ra tùy chọn sai." #: builtins.c:821 msgid "" "Display or manipulate the history list.\n" " \n" " Display the history list with line numbers, prefixing each modified\n" " entry with a `*'. An argument of N lists only the last N entries.\n" " \n" " Options:\n" " -c\tclear the history list by deleting all of the entries\n" " -d offset\tdelete the history entry at offset OFFSET.\n" " \n" " -a\tappend history lines from this session to the history file\n" " -n\tread all history lines not already read from the history file\n" " -r\tread the history file and append the contents to the history\n" " \tlist\n" " -w\twrite the current history to the history file\n" " \tand append them to the history list\n" " \n" " -p\tperform history expansion on each ARG and display the result\n" " \twithout storing it in the history list\n" " -s\tappend the ARGs to the history list as a single entry\n" " \n" " If FILENAME is given, it is used as the history file. Otherwise,\n" " if $HISTFILE has a value, that is used, else ~/.bash_history.\n" " \n" " If the $HISTTIMEFORMAT variable is set and not null, its value is used\n" " as a format string for strftime(3) to print the time stamp associated\n" " with each displayed history entry. No time stamps are printed otherwise.\n" " \n" " Exit Status:\n" " Returns success unless an invalid option is given or an error occurs." msgstr "" "Hiển thị hoặc thao tác danh sách lược sử.\n" "\n" " Hiển thị danh sách lược sử kèm số dòng, `*' ở đầu dòng cho các mục\n" " nhập bị sửa đổi. Đối số N thì liệt kê chỉ N mục nhập cuối cùng.\n" "\n" " Tùy chọn:\n" " -c\txoá sạch danh sách lược sử bằng cách xoá mọi mục nhập\n" " -d offset\txoá mục nhập lược sử ở offset này\n" "\n" " -a\tnối đuôi lược sử từ phiên làm việc này vào tập tin\n" " \tlược sử.\n" " -n\tđọc mọi dòng lược sử chưa đọc từ tập tin lược sử\n" " -r\tđọc tập tin lược sử và nối thêm vào danh sách lược sử\n" " -w\tghi lược sử hiện thời vào tập tin lược sử,\n" " \tvào nối đuôi vào danh sách lược sử\n" "\n" " -p\tbung lược sử với mỗi ĐỐI-SỐ và hiển thị kết quả\n" " \tmà không lưu vào danh sách lược sử\n" " -s\tnối đuôi ĐỐI-SỐ vào danh sách lược sử làm một mục đơn\n" "\n" " Nếu có TẬP-TIN thì nó được dùng làm tập tin lược sử. Ngược\n" " lại, nếu $HISTFILE có giá trị thì dùng; nếu $HISTFILE không có giá\n" " trị thì dùng `~/.bash_history'.\n" "\n" " Nếu biến $HISTTIMEFORMAT đã được đặt và khác rỗng, giá trị đó được\n" " dùng làm chuỗi định dạng cho strftime(3) để in nhãn thời gian\n" " tương ứng với mỗi mục nhập lược sử được hiển thị. Ngược lại không\n" " in nhãn thời gian.\n" "\n" " Trạng thái thoát:\n" " Trả lại thành công nếu không gặp tùy chọn sai hay gặp lỗi." #: builtins.c:857 msgid "" "Display status of jobs.\n" " \n" " Lists the active jobs. JOBSPEC restricts output to that job.\n" " Without options, the status of all active jobs is displayed.\n" " \n" " Options:\n" " -l\tlists process IDs in addition to the normal information\n" " -n\tlist only processes that have changed status since the last\n" " \tnotification\n" " -p\tlists process IDs only\n" " -r\trestrict output to running jobs\n" " -s\trestrict output to stopped jobs\n" " \n" " If -x is supplied, COMMAND is run after all job specifications that\n" " appear in ARGS have been replaced with the process ID of that job's\n" " process group leader.\n" " \n" " Exit Status:\n" " Returns success unless an invalid option is given or an error occurs.\n" " If -x is used, returns the exit status of COMMAND." msgstr "" "Hiển thị trạng thái của công việc.\n" "\n" " Liệt kê các công việc đang chạy. Đặc tả công việc ĐTCV hạn chế chỉ\n" " hiện công việc đó thôi. Không có tùy chọn thì hiển thị trạng thái\n" " của mọi công việc đang chạy.\n" "\n" " Tùy chọn:\n" " -l\tliệt kê mã số tiến trình ngoài thông tin bình thường\n" " -n\tliệt kê chỉ những tiến trình đã thay đổi trạng thái\n" " \tkể từ lần thông báo cuối cùng\n" " -s\tchỉ hiện những công việc đang dừng chạy\n" "\n" " Nếu có `-x' thì chạy LỆNH sau khi thay thế tất cả đặc tả công việc\n" " trên đối số bằng mã tiến trình của trình dẫn đầu nhóm tiến trình\n" " của công việc đó.\n" "\n" " Trạng thái thoát:\n" " Trả lại thành công nếu không gặp tùy chọn sai hay gặp lỗi.\n" " Đưa ra `-x' thì trả lại trạng thái thoát của LỆNH." #: builtins.c:884 msgid "" "Remove jobs from current shell.\n" " \n" " Removes each JOBSPEC argument from the table of active jobs. Without\n" " any JOBSPECs, the shell uses its notion of the current job.\n" " \n" " Options:\n" " -a\tremove all jobs if JOBSPEC is not supplied\n" " -h\tmark each JOBSPEC so that SIGHUP is not sent to the job if the\n" " \tshell receives a SIGHUP\n" " -r\tremove only running jobs\n" " \n" " Exit Status:\n" " Returns success unless an invalid option or JOBSPEC is given." msgstr "" "Bỏ công việc khỏi shell đang chạy.\n" "\n" " Gỡ bỏ công việc xác định bởi đặc tả công việc ĐTCV. Không có đối\n" " số thì dùng công việc hiện thời của shell.\n" "\n" " Tùy chọn:\n" " -a\tbỏ mọi công việc nếu không có ĐTCV\n" " -h\tđánh dấu ĐTCV để không gửi tín hiệu SIGHUP\n" " \tcho công việc khi shell nhận được SIGHUP\n" " -r\tchỉ bỏ những công việc đang chạy\n" "\n" " Trạng thái thoát:\n" " Trả lại thành công nếu không đưa ra tùy chọn sai hay\n" " ĐTCV sai." #: builtins.c:903 msgid "" "Send a signal to a job.\n" " \n" " Send the processes identified by PID or JOBSPEC the signal named by\n" " SIGSPEC or SIGNUM. If neither SIGSPEC nor SIGNUM is present, then\n" " SIGTERM is assumed.\n" " \n" " Options:\n" " -s sig\tSIG is a signal name\n" " -n sig\tSIG is a signal number\n" " -l\tlist the signal names; if arguments follow `-l' they are\n" " \tassumed to be signal numbers for which names should be listed\n" " \n" " Kill is a shell builtin for two reasons: it allows job IDs to be used\n" " instead of process IDs, and allows processes to be killed if the limit\n" " on processes that you can create is reached.\n" " \n" " Exit Status:\n" " Returns success unless an invalid option is given or an error occurs." msgstr "" "Gửi tín hiệu cho công việc.\n" "\n" " Gửi tín hiệu xác định bởi SIGSPEC hoặc SIGNUM cho những tiến trình\n" " xác định bởi PID hoặc JOBSPEC. Nếu không xác định cả SIGSPEC và\n" " SIGNUM thì ngầm định SIGTERM.\n" "\n" " Tùy chọn:\n" " -s TTH\tTTH là tên tín hiệu\n" " -n STH\tSTH là mã số tín hiệu\n" " -l\tliệt kê tên tín hiệu; đối số sau `-l' nếu có được coi\n" " \tlà mã số tín hiệu cần hiện tên\n" "\n" " Kill là lệnh shell dựng sẵn vì hai lý do: nó cho phép dùng mã số\n" " công việc thay cho mã số tiến trình và cho phép giết tiến trình\n" " đạt giới hạn số các tiến trình được phép tạo.\n" "\n" " Trạng thái thoát:\n" " Trả lại thành công nếu không đưa ra tùy chọn sai hay gặp lỗi." #: builtins.c:926 msgid "" "Evaluate arithmetic expressions.\n" " \n" " Evaluate each ARG as an arithmetic expression. Evaluation is done in\n" " fixed-width integers with no check for overflow, though division by 0\n" " is trapped and flagged as an error. The following list of operators is\n" " grouped into levels of equal-precedence operators. The levels are listed\n" " in order of decreasing precedence.\n" " \n" " \tid++, id--\tvariable post-increment, post-decrement\n" " \t++id, --id\tvariable pre-increment, pre-decrement\n" " \t-, +\t\tunary minus, plus\n" " \t!, ~\t\tlogical and bitwise negation\n" " \t**\t\texponentiation\n" " \t*, /, %\t\tmultiplication, division, remainder\n" " \t+, -\t\taddition, subtraction\n" " \t<<, >>\t\tleft and right bitwise shifts\n" " \t<=, >=, <, >\tcomparison\n" " \t==, !=\t\tequality, inequality\n" " \t&\t\tbitwise AND\n" " \t^\t\tbitwise XOR\n" " \t|\t\tbitwise OR\n" " \t&&\t\tlogical AND\n" " \t||\t\tlogical OR\n" " \texpr ? expr : expr\n" " \t\t\tconditional operator\n" " \t=, *=, /=, %=,\n" " \t+=, -=, <<=, >>=,\n" " \t&=, ^=, |=\tassignment\n" " \n" " Shell variables are allowed as operands. The name of the variable\n" " is replaced by its value (coerced to a fixed-width integer) within\n" " an expression. The variable need not have its integer attribute\n" " turned on to be used in an expression.\n" " \n" " Operators are evaluated in order of precedence. Sub-expressions in\n" " parentheses are evaluated first and may override the precedence\n" " rules above.\n" " \n" " Exit Status:\n" " If the last ARG evaluates to 0, let returns 1; let returns 0 otherwise." msgstr "" "Định giá biểu thức số học.\n" "\n" " Định giá mỗi ĐỐI-SỐ dạng biểu thức số học. Định giá theo số nguyên\n" " có giới hạn, không kiểm tra tràn số, mặc dù có bẫy chia cho không\n" " và bật cờ lỗi. Danh sách toán tử bên dưới được nhóm theo nhóm độ\n" " ưu tiên ngang hàng. Danh sách theo độ ưu tiên giảm dần.\n" "\n" " \tid++, id--\tbiến tăng/giảm hậu tố\n" " \t++id, --id\tbiến tăng/giảm tiền tố\n" " \t-, +\t\ttrừ, cộng (dấu)\n" " \t!, ~\t\tphủ định luận lý và trên bit\n" " \t**\t\tsố mũ\n" " \t*, /, %\t\tnhân, chia, số dư\n" " \t+, -\t\tcộng, trừ\n" " \t<<, >>\t\tdịch bit trái/phải\n" " \t<=, >=, <, >\tso sánh\n" " \t==, !=\t\tbằng, không bằng\n" " \t&\t\tphép AND trên bit\n" " \t^\t\tphép XOR trên bit\n" " \t|\t\tphép OR trên bit\n" " \t&&\t\tphép AND luận lý\n" " \t||\t\tphép OR luận lý\n" " \tBTHỨC ? BTHỨC : BTHỨC\n" " \t\t\ttoán từ điều kiện\n" " \t=, *=, /=, %=,\n" " \t+=, -=, <<=, >>=,\n" " \t&=, ^=, |=\tphép gán\n" "\n" " Biến shell có thể dùng làm toán hạng. Tên biến được thay thế bằng\n" " giá trị biến (chuyển thành số nguyên) trong biểu thức. Biến không\n" " cần có thuộc tính số nguyên để dùng làm biểu thức.\n" "\n" " Các toán tử được định giá theo thứ tự ưu tiên. Các biểu thức con\n" " nằm trong dấu ngoặc được định giá trước tiên, và có quyền cao hơn\n" " các quy tắc đi trước bên trên.\n" "\n" " Trạng thái thoát:\n" " Nếu ĐỐI-SỐ cuối cùng được định giá thành 0 thì trả về 1; không thì\n" " trả về 0." #: builtins.c:971 msgid "" "Read a line from the standard input and split it into fields.\n" " \n" " Reads a single line from the standard input, or from file descriptor FD\n" " if the -u option is supplied. The line is split into fields as with word\n" " splitting, and the first word is assigned to the first NAME, the second\n" " word to the second NAME, and so on, with any leftover words assigned to\n" " the last NAME. Only the characters found in $IFS are recognized as word\n" " delimiters.\n" " \n" " If no NAMEs are supplied, the line read is stored in the REPLY variable.\n" " \n" " Options:\n" " -a array\tassign the words read to sequential indices of the array\n" " \t\tvariable ARRAY, starting at zero\n" " -d delim\tcontinue until the first character of DELIM is read, rather\n" " \t\tthan newline\n" " -e\t\tuse Readline to obtain the line in an interactive shell\n" " -i text\tUse TEXT as the initial text for Readline\n" " -n nchars\treturn after reading NCHARS characters rather than waiting\n" " \t\tfor a newline, but honor a delimiter if fewer than NCHARS\n" " \t\tcharacters are read before the delimiter\n" " -N nchars\treturn only after reading exactly NCHARS characters, unless\n" " \t\tEOF is encountered or read times out, ignoring any delimiter\n" " -p prompt\toutput the string PROMPT without a trailing newline before\n" " \t\tattempting to read\n" " -r\t\tdo not allow backslashes to escape any characters\n" " -s\t\tdo not echo input coming from a terminal\n" " -t timeout\ttime out and return failure if a complete line of input is\n" " \t\tnot read withint TIMEOUT seconds. The value of the TMOUT\n" " \t\tvariable is the default timeout. TIMEOUT may be a\n" " \t\tfractional number. If TIMEOUT is 0, read returns success only\n" " \t\tif input is available on the specified file descriptor. The\n" " \t\texit status is greater than 128 if the timeout is exceeded\n" " -u fd\t\tread from file descriptor FD instead of the standard input\n" " \n" " Exit Status:\n" " The return code is zero, unless end-of-file is encountered, read times out,\n" " or an invalid file descriptor is supplied as the argument to -u." msgstr "" "Đọc một dòng từ đầu nhập chuẩn và tách ra nhiều trường.\n" "\n" " Đọc một dòng từ đầu nhập chuẩn, hoặc từ bộ mô tả tập tin FD nếu\n" " dùng tùy chọn `-u'. Dòng được chia ra nhiều trường, trường đầu\n" " tiên được gán cho biến TÊN đầu tiên, từ thứ hai cho TÊN thứ hai,\n" " v.v., và từ còn lại nào được gán cho TÊN cuối cùng. Chỉ những ký\n" " tự trong $IFS được coi là ký tự phân cách.\n" "\n" " Không có TÊN thì dòng được đọc sẽ lưu vào biến REPLY.\n" "\n" " Tùy chọn:\n" " -a MẢNG\tlưu các trường vào biến mảng chỉ mục MẢNG theo thứ tự,\n" " \tbắt đầu từ không.\n" " -d DELIM\ttiếp tục đến khi đọc ký tự đầu tiên của DELIM thay\n" " \tvì ký tự xuống dòng\n" " -e\tdùng Readline để lấy dòng trong shell tương tác\n" " -i CHUỖI\tdùng CHUỖI làm văn bản đầu tiên cho Readline\n" " -n N\ttrở về sau khi đọc số lượng ký tự này thay vì đọc hết dòng\n" " -N N\ttrở về chỉ sau khi đọc chính xác số lượng ký tự này,\n" " \tnếu không gặp kết thúc tập tin (EOF) hay quá hạn đọc,\n" " \tcũng bỏ qua dấu tách nào\n" " -p NHẮC\txuất chuỗi NHẮC mà không có ký tự dòng mới theo sau,\n" " \ttrước khi đọc\n" " -r\tkhông cho phép gạch chéo ngược để thoát ký tự\n" " -s\tkhông hiện lại dữ liệu nhập đến từ thiết bị cuối\n" " -t THỜI_HẠN\n" " \tquá thời và trả lại không thành công nếu chưa đọc một\n" " \tdòng dữ liệu nhập hoàn toàn trong số giây này. Giá trị\n" " \tcủa biến TMOUT là thời hạn mặc định. Thời hạn này có\n" " \tthể là một phân số. Nếu THỜI_HẠN là 0 thì việc đọc trả\n" " \tlại thành công chỉ nếu dữ liệu nhập sẵn sàng trên bộ\n" " \tmô tả tập tin đưa ra. Trạng thái thoát lớn hơn 128\n" " \tnếu vượt quá thời hạn này.\n" " -u FD\tđọc từ bộ mô tả tập tin FD thay cho đầu nhập chuẩn\n" "\n" " Trạng thái thoát:\n" " Mã trả lại là số không, nếu không gặp kết thúc tập tin, hay quá\n" " hạn đọc, hay đưa ra bộ mô tả tập tin sai làm đối số tới `-u'." #: builtins.c:1014 msgid "" "Return from a shell function.\n" " \n" " Causes a function or sourced script to exit with the return value\n" " specified by N. If N is omitted, the return status is that of the\n" " last command executed within the function or script.\n" " \n" " Exit Status:\n" " Returns N, or failure if the shell is not executing a function or script." msgstr "" "Trở về từ hàm shell.\n" "\n" " Thoát hàm shell hoặc văn lệnh được 'source' với mã trả về xác định\n" " bởi N. Nếu không có N, trạng thái thoát là của lệnh thực hiện cuối\n" " cùng trong hàm/văn lệnh.\n" "\n" " Trạng thái thoát:\n" " Trả lại N, hoặc bị lỗi nếu shell không đang chạy một hàm hay văn\n" " lệnh." #: builtins.c:1027 msgid "" "Set or unset values of shell options and positional parameters.\n" " \n" " Change the value of shell attributes and positional parameters, or\n" " display the names and values of shell variables.\n" " \n" " Options:\n" " -a Mark variables which are modified or created for export.\n" " -b Notify of job termination immediately.\n" " -e Exit immediately if a command exits with a non-zero status.\n" " -f Disable file name generation (globbing).\n" " -h Remember the location of commands as they are looked up.\n" " -k All assignment arguments are placed in the environment for a\n" " command, not just those that precede the command name.\n" " -m Job control is enabled.\n" " -n Read commands but do not execute them.\n" " -o option-name\n" " Set the variable corresponding to option-name:\n" " allexport same as -a\n" " braceexpand same as -B\n" " emacs use an emacs-style line editing interface\n" " errexit same as -e\n" " errtrace same as -E\n" " functrace same as -T\n" " hashall same as -h\n" " histexpand same as -H\n" " history enable command history\n" " ignoreeof the shell will not exit upon reading EOF\n" " interactive-comments\n" " allow comments to appear in interactive commands\n" " keyword same as -k\n" " monitor same as -m\n" " noclobber same as -C\n" " noexec same as -n\n" " noglob same as -f\n" " nolog currently accepted but ignored\n" " notify same as -b\n" " nounset same as -u\n" " onecmd same as -t\n" " physical same as -P\n" " pipefail the return value of a pipeline is the status of\n" " the last command to exit with a non-zero status,\n" " or zero if no command exited with a non-zero status\n" " posix change the behavior of bash where the default\n" " operation differs from the Posix standard to\n" " match the standard\n" " privileged same as -p\n" " verbose same as -v\n" " vi use a vi-style line editing interface\n" " xtrace same as -x\n" " -p Turned on whenever the real and effective user ids do not match.\n" " Disables processing of the $ENV file and importing of shell\n" " functions. Turning this option off causes the effective uid and\n" " gid to be set to the real uid and gid.\n" " -t Exit after reading and executing one command.\n" " -u Treat unset variables as an error when substituting.\n" " -v Print shell input lines as they are read.\n" " -x Print commands and their arguments as they are executed.\n" " -B the shell will perform brace expansion\n" " -C If set, disallow existing regular files to be overwritten\n" " by redirection of output.\n" " -E If set, the ERR trap is inherited by shell functions.\n" " -H Enable ! style history substitution. This flag is on\n" " by default when the shell is interactive.\n" " -P If set, do not follow symbolic links when executing commands\n" " such as cd which change the current directory.\n" " -T If set, the DEBUG trap is inherited by shell functions.\n" " -- Assign any remaining arguments to the positional parameters.\n" " If there are no remaining arguments, the positional parameters\n" " are unset.\n" " - Assign any remaining arguments to the positional parameters.\n" " The -x and -v options are turned off.\n" " \n" " Using + rather than - causes these flags to be turned off. The\n" " flags can also be used upon invocation of the shell. The current\n" " set of flags may be found in $-. The remaining n ARGs are positional\n" " parameters and are assigned, in order, to $1, $2, .. $n. If no\n" " ARGs are given, all shell variables are printed.\n" " \n" " Exit Status:\n" " Returns success unless an invalid option is given." msgstr "" "Đặt hay huỷ giá trị của tùy chọn shell và tham số thuộc vị trí.\n" "\n" " Sửa đổi giá trị của thuộc tính shell và tham số thuộc vị trí,\n" " hoặc hiển thị tên và giá trị của biến shell.\n" "\n" " Tùy chọn:\n" " -a đánh dấu các biến được tạo hay sửa đổi để xuất khẩu\n" " -b thông báo ngay về công việc bị chấm dứt\n" " -e thoát ngay nếu câu lệnh thoát với trạng thái khác số không\n" " -f tắt chức năng tạo tên tập tin (glob)\n" " -h nhớ vị trí của mỗi câu lệnh khi nó được dò tìm\n" " -k mọi đối số gán được đặt vào môi trường cho một câu lệnh,\n" " không phải chỉ những đối số nằm trước tên câu lệnh\n" " -m bật chức năng điều khiển công việc\n" " -n đọc câu lệnh mà không thực thi\n" " -o TÊN_TÙY_CHỌN\n" " đặt biến tương ứng với TÊN_TÙY_CHỌN:\n" " allexport giống -a\n" " braceexpand giống -B\n" " emacs dùng giao diện soạn thảo kiểu emacs\n" " errexit giống -e\n" " errtrace giống -E\n" " functrace giống -T\n" " hashall giống -h\n" " histexpand giống -H\n" " history bật lịch sử câu lệnh\n" " ignoreeof shell không thoát khi đọc EOF\n" " interactive-comments\n" " cho phép ghi chú trong lệnh tương tác\n" " keyword giống -k\n" " monitor giống -m\n" " noclobber giống -C\n" " noexec giống -n\n" " noglob giống -f\n" " nolog hiện thời chấp nhận nhưng bỏ qua\n" " notify giống -b\n" " nounset giống -u\n" " onecmd giống -t\n" " physical giống -P\n" " pipefail giá trị trả lại của ống dẫn là\n" " trạng thái của câu lệnh cuối cùng\n" " có trạng thái khác không, hoặc số\n" " không nếu không có câu lệnh thoát\n" " với trạng thái khác không\n" " posix thay đổi những thao tác khác với\n" " Posix thành tuân theo Posix\n" " privileged giống -p\n" " verbose giống -v\n" " vi dùng giao diện soạn thảo kiểu vi\n" " xrace giống -x\n" " -p bật khi nào mã số thật và mã số có kết quả\n" " không tương ứng với nhau.\n" " Tắt tính năng xử lý tập tin $ENV\n" " và nhập các hàm vào shell.\n" " Việc tắt tùy chọn này thì gây ra uid và gid có kết quả\n" " được đặt thành uid và gid thật.\n" " -t thoát sau khi đọc và thực thi một câu lệnh\n" " -u xử lý biến chưa đặt là lỗi khi thay thế\n" " -v in ra mỗi dòng nhập vào shell khi nó được đọc\n" " -x in ra mỗi câu lệnh và đối số tương ứng khi nó được thực thi\n" " -B shell sẽ mở rộng các dấu ngoặc móc\n" " -C Nếu đặt thì không cho phép ghi đè lên tập tin bình thường\n" " đã tồn tại bằng cách chuyển hướng kết xuất\n" " -E Nếu đặt thì bẫy ERR được chức năng shell kế thừa\n" " -H Bật! bật chức năng thay thế kiểu. Cờ này được bật\n" " theo mặc định khi shell tương tác\n" " -P đặt thì không theo liên kết tượng trưng\n" " khi thực thi câu lệnh như cd mà chuyển đổi thư mục hiện tại\n" " -T Nếu đặt thì bẫy DEBUG (gỡ lỗi) được các hàm của shell kế thừa\n" " -- Gán bất cứ đối số còn lại nào cho những tham số thuộc vị trí.\n" " Nếu không còn thừa lại đối số nào, tham số vị trí\n" " ìm kiếm được đặt.\n" " - Gán bất cứ đối số còn lại nào cho những tham số thuộc vị trí.\n" " Hai tùy chọn -x và -v đều bị tắt.\n" "\n" " Việc dùng + thay - làm tắt cờ. Các cờ cũng có thể được dùng khi\n" " gọi shell. Giá trị các cờ hiện hành có thể tìm thấy trong biến\n" " $-. Các đối số còn lại là tham số thuộc vị trí, và được gán (theo\n" " thứ tự) cho $1, $2, .. $n. Không đưa ra đối số thì in ra mọi biến\n" " shell.\n" "\n" " Trạng thái thoát:\n" " Trả lại thành công trừ phi gặp tùy chọn sai." #: builtins.c:1112 msgid "" "Unset values and attributes of shell variables and functions.\n" " \n" " For each NAME, remove the corresponding variable or function.\n" " \n" " Options:\n" " -f\ttreat each NAME as a shell function\n" " -v\ttreat each NAME as a shell variable\n" " \n" " Without options, unset first tries to unset a variable, and if that fails,\n" " tries to unset a function.\n" " \n" " Some variables cannot be unset; also see `readonly'.\n" " \n" " Exit Status:\n" " Returns success unless an invalid option is given or a NAME is read-only." msgstr "" "Xoá giá trị và thuộc tính biến và hàm shell.\n" "\n" " Đối với mỗi TÊN, gỡ bỏ biến hay hàm tương ứng.\n" "\n" " Tùy chọn:\n" " -f\tđọc TÊN dạng hàm shell\n" " -v\tđọc TÊN dạng biến shell\n" "\n" " Không có tùy chọn thì sẽ thử xoá biến, và nếu không thành công,\n" " sau đó thử xoá hàm.\n" "\n" " Trạng thái thoát:\n" " Trả lại thành công nếu không đưa ra tùy chọn sai, và TÊN không chỉ đọc." #: builtins.c:1132 msgid "" "Set export attribute for shell variables.\n" " \n" " Marks each NAME for automatic export to the environment of subsequently\n" " executed commands. If VALUE is supplied, assign VALUE before exporting.\n" " \n" " Options:\n" " -f\trefer to shell functions\n" " -n\tremove the export property from each NAME\n" " -p\tdisplay a list of all exported variables and functions\n" " \n" " An argument of `--' disables further option processing.\n" " \n" " Exit Status:\n" " Returns success unless an invalid option is given or NAME is invalid." msgstr "" "Đặt thuộc tính xuất khẩu cho biến shell.\n" "\n" " Đánh dấu TÊN để tự động xuất vào môi trường của các lệnh được chạy\n" " sau đó. Có GIÁ-TRỊ thì gán GIÁ-TRỊ trước khi xuất ra.\n" "\n" " Tùy chọn:\n" " -f\ttham chiếu đến hàm shell\n" " -n\tgỡ bỏ thuộc tính xuất khẩu khỏi TÊN\n" " -p\thiển thị danh sách các biến và hàm được xuất khẩu\n" "\n" " Đối số `--' ngưng phân tích tuỳ chọn cho các tham số còn lại.\n" "\n" " Trạng thái thoát:\n" " Trả lại thành công nếu không đưa ra tùy chọn sai hay TÊN sai," #: builtins.c:1151 msgid "" "Mark shell variables as unchangeable.\n" " \n" " Mark each NAME as read-only; the values of these NAMEs may not be\n" " changed by subsequent assignment. If VALUE is supplied, assign VALUE\n" " before marking as read-only.\n" " \n" " Options:\n" " -a\trefer to indexed array variables\n" " -A\trefer to associative array variables\n" " -f\trefer to shell functions\n" " -p\tdisplay a list of all readonly variables and functions\n" " \n" " An argument of `--' disables further option processing.\n" " \n" " Exit Status:\n" " Returns success unless an invalid option is given or NAME is invalid." msgstr "" "Đánh dấu biến shell không thể thay đổi.\n" "\n" " Đánh dấu TÊN là chỉ đọc; giá trị những biến này không được thay\n" " đổi trong các phép gán sau. Nếu có GIÁ-TRỊ thì gán GIÁ-TRỊ trước\n" " khi đánh dấu là chỉ đọc.\n" "\n" " Tùy chọn:\n" " -a\ttham chiếu đến biến kiểu mảng chỉ số\n" " -A\ttham chiếu đến biến kiểu mảng kết hợp\n" " -f\ttham chiếu đến hàm shell\n" " -p\thiển thị danh sách biến và hàm chỉ đọc\n" "\n" " Đối số `--' ngưng phân tích tuỳ chọn cho các tham số còn lại.\n" "\n" " Trạng thái thoát:\n" " Trả lại thành công nếu không đưa ra tùy chọn sai hay TÊN sai." #: builtins.c:1172 msgid "" "Shift positional parameters.\n" " \n" " Rename the positional parameters $N+1,$N+2 ... to $1,$2 ... If N is\n" " not given, it is assumed to be 1.\n" " \n" " Exit Status:\n" " Returns success unless N is negative or greater than $#." msgstr "" "Dời tham số thuộc vị trí.\n" "\n" " Thay đổi tên của tham số vị trí $N+1,$N+2 ... thành $1,$2 ...\n" " N là 1 nếu không xác định.\n" "\n" " Trạng thái thoát:\n" " Trả lại thành công trừ khi N âm hay lớn hơn $#." #: builtins.c:1184 builtins.c:1199 msgid "" "Execute commands from a file in the current shell.\n" " \n" " Read and execute commands from FILENAME in the current shell. The\n" " entries in $PATH are used to find the directory containing FILENAME.\n" " If any ARGUMENTS are supplied, they become the positional parameters\n" " when FILENAME is executed.\n" " \n" " Exit Status:\n" " Returns the status of the last command executed in FILENAME; fails if\n" " FILENAME cannot be read." msgstr "" "Thực thi lệnh từ tập tin trong shell hiện tại.\n" "\n" " Đọc và thực thi lệnh từ TẬP-TIN trong shell đang chạy. $PATH được\n" " dùng để tìm thư mục chứa tập tin này. Nếu có đối số thì mỗi đối số\n" " trở thành tham số vị trí khi TẬP-TIN được thực thi.\n" "\n" " Trạng thái thoát:\n" " Trả lại trạng thái của câu lệnh cuối cùng được thực thi trong\n" " TẬP-TIN; không thành công nếu không thể đọc TẬP-TIN." #: builtins.c:1215 msgid "" "Suspend shell execution.\n" " \n" " Suspend the execution of this shell until it receives a SIGCONT signal.\n" " Unless forced, login shells cannot be suspended.\n" " \n" " Options:\n" " -f\tforce the suspend, even if the shell is a login shell\n" " \n" " Exit Status:\n" " Returns success unless job control is not enabled or an error occurs." msgstr "" "Ngưng chạy shell.\n" "\n" " Ngưng chạy shell này đến khi nhận tín hiệu SIGCONT. Nếu không ép\n" " buộc thì không thể ngưng chạy shell đăng nhập.\n" "\n" " Tùy chọn:\n" " \t-f\tbuộc ngưng, thậm chí với shell đăng nhập\n" "\n" " Trạng thái thoát:\n" " Trả lại thành công trừ khi chức năng điều khiển công việc không\n" " được bật hoặc gặp lỗi." #: builtins.c:1231 msgid "" "Evaluate conditional expression.\n" " \n" " Exits with a status of 0 (true) or 1 (false) depending on\n" " the evaluation of EXPR. Expressions may be unary or binary. Unary\n" " expressions are often used to examine the status of a file. There\n" " are string operators and numeric comparison operators as well.\n" " \n" " The behavior of test depends on the number of arguments. Read the\n" " bash manual page for the complete specification.\n" " \n" " File operators:\n" " \n" " -a FILE True if file exists.\n" " -b FILE True if file is block special.\n" " -c FILE True if file is character special.\n" " -d FILE True if file is a directory.\n" " -e FILE True if file exists.\n" " -f FILE True if file exists and is a regular file.\n" " -g FILE True if file is set-group-id.\n" " -h FILE True if file is a symbolic link.\n" " -L FILE True if file is a symbolic link.\n" " -k FILE True if file has its `sticky' bit set.\n" " -p FILE True if file is a named pipe.\n" " -r FILE True if file is readable by you.\n" " -s FILE True if file exists and is not empty.\n" " -S FILE True if file is a socket.\n" " -t FD True if FD is opened on a terminal.\n" " -u FILE True if the file is set-user-id.\n" " -w FILE True if the file is writable by you.\n" " -x FILE True if the file is executable by you.\n" " -O FILE True if the file is effectively owned by you.\n" " -G FILE True if the file is effectively owned by your group.\n" " -N FILE True if the file has been modified since it was last read.\n" " \n" " FILE1 -nt FILE2 True if file1 is newer than file2 (according to\n" " modification date).\n" " \n" " FILE1 -ot FILE2 True if file1 is older than file2.\n" " \n" " FILE1 -ef FILE2 True if file1 is a hard link to file2.\n" " \n" " String operators:\n" " \n" " -z STRING True if string is empty.\n" " \n" " -n STRING\n" " STRING True if string is not empty.\n" " \n" " STRING1 = STRING2\n" " True if the strings are equal.\n" " STRING1 != STRING2\n" " True if the strings are not equal.\n" " STRING1 < STRING2\n" " True if STRING1 sorts before STRING2 lexicographically.\n" " STRING1 > STRING2\n" " True if STRING1 sorts after STRING2 lexicographically.\n" " \n" " Other operators:\n" " \n" " -o OPTION True if the shell option OPTION is enabled.\n" " -v VAR\t True if the shell variable VAR is set\n" " ! EXPR True if expr is false.\n" " EXPR1 -a EXPR2 True if both expr1 AND expr2 are true.\n" " EXPR1 -o EXPR2 True if either expr1 OR expr2 is true.\n" " \n" " arg1 OP arg2 Arithmetic tests. OP is one of -eq, -ne,\n" " -lt, -le, -gt, or -ge.\n" " \n" " Arithmetic binary operators return true if ARG1 is equal, not-equal,\n" " less-than, less-than-or-equal, greater-than, or greater-than-or-equal\n" " than ARG2.\n" " \n" " Exit Status:\n" " Returns success if EXPR evaluates to true; fails if EXPR evaluates to\n" " false or an invalid argument is given." msgstr "" "Định giá biểu thức điều kiện.\n" "\n" " Thoát với trạng thái 0 (đúng) hoặc 1 (sai), tuỳ kết quả định giá\n" " BTHỨC. Biểu thức có thể kiểu một ngôi hoặc hai ngôi. Biểu thức\n" " một ngôi thường dùng để kiểm tra trạng thái tập tin. Ngoài ra còn\n" " có toán tử chuỗi và so sánh số.\n" " \n" " Hành vi của test phụ thuộc vào số đối số. Đọc sổ tay hướng dẫn của\n" " bash để có mô tả đầy đủ.\n" " \n" " Toán tử tập tin:\n" " \n" " -a TẬP-TIN Đúng nếu tập tin tồn tại.\n" " -b TẬP-TIN Đúng nếu tập tin là đặc biệt khối.\n" " -c TẬP-TIN Đúng nếu tập tin là đặc biệt ký tự.\n" " -d TẬP-TIN Đúng nếu tập tin là thư mục.\n" " -e TẬP-TIN Đúng nếu tập tin tồn tại.\n" " -f TẬP-TIN Đúng nếu tập tin tồn tại và là tập tin thường\n" " -g TẬP-TIN Đúng nếu tập tin là set-group-id.\n" " -h TẬP-TIN Đúng nếu tập tin là liên kết tượng trưng.\n" " -L TẬP-TIN Đúng nếu tập tin là liên kết tượng trưng.\n" " -k TẬP-TIN Đúng nếu tập tin có bit `sticky'.\n" " -p TẬP-TIN Đúng nếu tập tin là ống dẫn có tên.\n" " -r TẬP-TIN Đúng nếu tập tin đọc được (bởi bạn).\n" " -s TẬP-TIN Đúng nếu tập tin tồn tại và khác rỗng.\n" " -S TẬP-TIN Đúng nếu tập tin là socket.\n" " -t FD Đúng nếu FD được mở trên thiết bị cuối.\n" " -u TẬP-TIN Đúng nếu tập tin là set-user-id.\n" " -w TẬP-TIN Đúng nếu tập tin ghi được (bởi bạn).\n" " -x TẬP-TIN Đúng nếu tập tin chạy được (bởi bạn).\n" " -O TẬP-TIN Đúng nếu tập tin thực tế được bạn sở hữu.\n" " -G TẬP-TIN Đúng nếu tập tin thực tế được nhóm của bạn sở hữu.\n" " -N TẬP-TIN Đúng nếu tập tin đã bị sửa đổi từ lần đọc cuối.\n" " \n" " TẬP-TIN1 -nt TẬP-TIN2\n" " Đúng nếu tập tin 1 mới hơn tập tin 2 (dựa theo\n" " ngày sửa đổi)\n" " \n" " TẬP-TIN1 -ot TẬP-TIN2\n" " Đúng nếu tập tin 1 cũ hơn tập tin 2.\n" " \n" " TẬP-TIN1 -ef TẬP-TIN2\n" " Đúng nếu tập tin 1 là liên kết cứng tới tập tin 2.\n" " \n" " Toán tử chuỗi:\n" " \n" " -z CHUỖI Đúng nếu chuỗi rỗng.\n" " \n" " -n CHUỖI\n" " CHUỖI Đúng nếu chuỗi khác rỗng.\n" " \n" " CHUỖI1 = CHUỖI2 Đúng nếu hai chuỗi trùng nhau.\n" " CHUỖI1 != CHUỖI2 Đúng nếu hai chuỗi khác nhau.\n" " CHUỖI1 < CHUỖI2 Đúng nếu CHUỖI1 xếp trước CHUỖI2 theo thứ tự từ điển.\n" " CHUỖI1 > CHUỖI2 Đúng nếu CHUỖI1 xếp sau CHUỖI2 theo thứ tự từ điển.\n" " \n" " Toán tử khác:\n" " \n" " -o TÙY_CHỌN Đúng nếu tùy chọn shell này được bật.\n" " -v BIẾN Đúng nếu BIẾN được đặt\n" " ! BTHỨC Đúng nếu biểu thức này không đúng.\n" " BTHỨC1 -a BTHỨC2\n" " Đúng nếu cả hai biểu thức là đúng.\n" " BTHỨC1 -o BTHỨC2\n" " Đúng nếu một của hai biểu thức đúng.\n" " \n" " ĐỐI-SỐ1 OP ĐỐI-SỐ2\n" " Phép thử số học. OP là một trong -eq, -ne,\n" " -lt, -le, -gt, or -ge.\n" " \n" " Phép toán số học hai ngôi trả về đúng nếu ĐỐI-SỐ1 bằng, khác, nhỏ\n" " hơn, nhỏ hơn hoặc bằng, lớn hơn, lớn hơn hoặc bằng ĐỐI-SỐ2.\n" "\n" " Trạng thái thoát:\n" " Trả lại thành công nếu BTHỨC định giá là Đúng; không thành công\n" " nếu BTHỨC định giá thành Sai hay đối số được chỉ ra sai." #: builtins.c:1311 msgid "" "Evaluate conditional expression.\n" " \n" " This is a synonym for the \"test\" builtin, but the last argument must\n" " be a literal `]', to match the opening `['." msgstr "" "Định giá biểu thức điều kiện.\n" "\n" " Lệnh này đồng nghĩa với lệnh dựng sẵn \"test\", nhưng đối số cuối\n" " cùng phải là ký tự `]' để khớp với `[' ở đầu." #: builtins.c:1320 msgid "" "Display process times.\n" " \n" " Prints the accumulated user and system times for the shell and all of its\n" " child processes.\n" " \n" " Exit Status:\n" " Always succeeds." msgstr "" "Hiển thị thời lượng chạy tiến trình.\n" "\n" " In thời lượng chạy ở mức người dùng và hệ thống của shell và các\n" " tiến trình con.\n" "\n" " Trạng thái thoát:\n" " Lúc nào cũng thành công." #: builtins.c:1332 msgid "" "Trap signals and other events.\n" " \n" " Defines and activates handlers to be run when the shell receives signals\n" " or other conditions.\n" " \n" " ARG is a command to be read and executed when the shell receives the\n" " signal(s) SIGNAL_SPEC. If ARG is absent (and a single SIGNAL_SPEC\n" " is supplied) or `-', each specified signal is reset to its original\n" " value. If ARG is the null string each SIGNAL_SPEC is ignored by the\n" " shell and by the commands it invokes.\n" " \n" " If a SIGNAL_SPEC is EXIT (0) ARG is executed on exit from the shell. If\n" " a SIGNAL_SPEC is DEBUG, ARG is executed before every simple command. If\n" " a SIGNAL_SPEC is RETURN, ARG is executed each time a shell function or a\n" " script run by the . or source builtins finishes executing. A SIGNAL_SPEC\n" " of ERR means to execute ARG each time a command's failure would cause the\n" " shell to exit when the -e option is enabled.\n" " \n" " If no arguments are supplied, trap prints the list of commands associated\n" " with each signal.\n" " \n" " Options:\n" " -l\tprint a list of signal names and their corresponding numbers\n" " -p\tdisplay the trap commands associated with each SIGNAL_SPEC\n" " \n" " Each SIGNAL_SPEC is either a signal name in or a signal number.\n" " Signal names are case insensitive and the SIG prefix is optional. A\n" " signal may be sent to the shell with \"kill -signal $$\".\n" " \n" " Exit Status:\n" " Returns success unless a SIGSPEC is invalid or an invalid option is given." msgstr "" "Bẫy tín hiệu và sự kiện khác.\n" "\n" " Định nghĩa và kích hoạt các bộ xử lý khi shell nhận được tín hiệu\n" " hay các điều kiện khác.\n" "\n" " ĐỐI-SỐ là một lệnh cần đọc và thực thi khi shell nhận được tín\n" " hiệu theo đặc tả tín hiệu ĐTTH. Nếu không có ĐỐI-SỐ (và chỉ cung\n" " cấp một ĐTTH), hoặc cung cấp `-', mỗi tín hiệu được xác định thì\n" " được đặt lại về giá trị gốc. Nếu ĐỐI-SỐ là chuỗi rỗng thì mỗi ĐTTH\n" " bị shell và những lệnh bên trong bỏ qua.\n" "\n" " Nếu ĐTTH là EXIT (0) thì ĐỐI-SỐ được thực thi khi thoát\n" " khỏi shell. Nếu là DEBUG, ĐỐI-SỐ được thực thi trước mỗi lệnh đơn\n" " giản. Nếu là RETURN, ĐỐI-SỐ được thực thi mỗi khi hàm shell hay\n" " một văn lệnh, được chạy bởi lệnh `.' hoặc 'source', kết thúc thực\n" " thi. ĐTTH ERR nghĩa là thực thi ĐỐI-SỐ mỗi khi lệnh gặp\n" " lỗi dẫn đến thoát shell khi bật tùy chọn -e.\n" " \n" " Nếu không có đối số, `trap' sẽ in danh sách của các lệnh gắn với\n" " các tín hiệu.\n" " \n" " Tùy chọn:\n" " -l\tin danh sách tên tín hiệu và mã số tương ứng\n" " -p\thiển thị lệnh bắt tương ứng với mỗi ĐTTH\n" "\n" " Mỗi ĐTTH hoặc là tên tín hiệu trong , hoặc mã\n" " số tín hiệu. Tên tín hiệu không phân biệt chữ hoa/thường, và không\n" " bắt buộc phải dùng tiền tố SIG. Có thể gửi tín hiệu cho shell bằng\n" " \"kill -signal $$\".\n" "\n" " Trạng thái thoát:\n" " Trả lại thành công trừ phi đưa ra ĐTTH sai hay tùy chọn\n" " sai." #: builtins.c:1368 msgid "" "Display information about command type.\n" " \n" " For each NAME, indicate how it would be interpreted if used as a\n" " command name.\n" " \n" " Options:\n" " -a\tdisplay all locations containing an executable named NAME;\n" " \tincludes aliases, builtins, and functions, if and only if\n" " \tthe `-p' option is not also used\n" " -f\tsuppress shell function lookup\n" " -P\tforce a PATH search for each NAME, even if it is an alias,\n" " \tbuiltin, or function, and returns the name of the disk file\n" " \tthat would be executed\n" " -p\treturns either the name of the disk file that would be executed,\n" " \tor nothing if `type -t NAME' would not return `file'.\n" " -t\toutput a single word which is one of `alias', `keyword',\n" " \t`function', `builtin', `file' or `', if NAME is an alias, shell\n" " \treserved word, shell function, shell builtin, disk file, or not\n" " \tfound, respectively\n" " \n" " Arguments:\n" " NAME\tCommand name to be interpreted.\n" " \n" " Exit Status:\n" " Returns success if all of the NAMEs are found; fails if any are not found." msgstr "" "Hiển thị thông tin loại câu lệnh.\n" "\n" " Đối với mỗi TÊN, chỉ ra cách thông dịch lệnh khi được thực thi\n" " theo tên lệnh.\n" "\n" " Tùy chọn:\n" " -a\thiển thị mọi vị trí chứa tập tin thực thi được có TÊN;\n" " \tkhông đặt tùy chọn `-p' thì bao gồm các bí danh, lệnh\n" " \tdựng sẵn và hàm.\n" " -f\tngăn tra cứu hàm shell\n" " -P\tbuộc tìm kiếm PATH đối với mỗi TÊN, thậm chí nếu nó là\n" " \tbí danh, lệnh dựng sẵn hay hàm, và trả lại tên của tập\n" " \ttin trên đĩa mà sẽ được thực thi\n" " -p\ttrả về hoặc tên của tập tin trên đĩa mà sẽ được thực\n" " \t\tthi, hoặc gì cả `type -t TÊN' sẽ không trả về `file'\n" " \t\t(tập tin).\n" " -t\txuất một trong những từ đơn `alias', `keyword', `function',\n" " \t`builtin', `file' hoặc `', nếu TÊN tương ứng là bí danh,\n" " \ttừ khoá shell, hàm shell, lệnh shell dựng sẵn, tập tin\n" " \ttrên đĩa, hoặc không tìm thấy.\n" "\n" " Đối số:\n" " TÊN\ttên câu lệnh cần giải thích.\n" "\n" " Trạng thái thoát:\n" " Trả lại thành công nếu tìm thấy tất cả các TÊN; không thì bị lỗi." #: builtins.c:1399 msgid "" "Modify shell resource limits.\n" " \n" " Provides control over the resources available to the shell and processes\n" " it creates, on systems that allow such control.\n" " \n" " Options:\n" " -S\tuse the `soft' resource limit\n" " -H\tuse the `hard' resource limit\n" " -a\tall current limits are reported\n" " -b\tthe socket buffer size\n" " -c\tthe maximum size of core files created\n" " -d\tthe maximum size of a process's data segment\n" " -e\tthe maximum scheduling priority (`nice')\n" " -f\tthe maximum size of files written by the shell and its children\n" " -i\tthe maximum number of pending signals\n" " -l\tthe maximum size a process may lock into memory\n" " -m\tthe maximum resident set size\n" " -n\tthe maximum number of open file descriptors\n" " -p\tthe pipe buffer size\n" " -q\tthe maximum number of bytes in POSIX message queues\n" " -r\tthe maximum real-time scheduling priority\n" " -s\tthe maximum stack size\n" " -t\tthe maximum amount of cpu time in seconds\n" " -u\tthe maximum number of user processes\n" " -v\tthe size of virtual memory\n" " -x\tthe maximum number of file locks\n" " \n" " If LIMIT is given, it is the new value of the specified resource; the\n" " special LIMIT values `soft', `hard', and `unlimited' stand for the\n" " current soft limit, the current hard limit, and no limit, respectively.\n" " Otherwise, the current value of the specified resource is printed. If\n" " no option is given, then -f is assumed.\n" " \n" " Values are in 1024-byte increments, except for -t, which is in seconds,\n" " -p, which is in increments of 512 bytes, and -u, which is an unscaled\n" " number of processes.\n" " \n" " Exit Status:\n" " Returns success unless an invalid option is supplied or an error occurs." msgstr "" "Sửa đổi giới hạn tài nguyên shell.\n" "\n" " Điều khiển tài nguyên của shell và các tiến trình nó tạo ra, trên\n" " hệ thống hỗ trợ điểu khiển tài nguyên như vậy.\n" "\n" " Tùy chọn:\n" " -S\tdùng giới hạn tài nguyên `soft' (mềm)\n" " -H\tdùng giới hạn tài nguyên `hard' (cứng)\n" " -a\tthông báo mọi giới hạn hiện thời\n" " -b\tkích cỡ của vùng đệm socket\n" " -c\tkích cỡ tối đa của tập tin core được tạo\n" " -d\tkích cỡ tối đa của từng đoạn dữ liệu của một tiến trình\n" " -e\tmức ưu tiên lập lịch cao nhất (`nice')\n" " -f\tkích cỡ tập tin tối đa được ghi bởi shell và tiến trình con\n" " -i\tsố tín hiệu bị hoãn tối đa\n" " -l\tkích cỡ tối đa mà tiến trình có thể khoá vào bộ nhớ\n" " -m\tkích cỡ tập nội trú (RSS) tối đa\n" " -n\tsố bộ mô tả tập tin tối đa được mở\n" " -p\tkích thước vùng đệm ống dẫn\n" " -q\tsố byte tối đa trong hàng đợi thông điệp POSIX\n" " -r\tmức ưu lập lịch thời gian thực cao nhất\n" " -s\tkích thước ngăn xếp tối đa\n" " -t\tlượng thời gian cpu tối đa theo giây\n" " -u\tsố tiến trình người dùng tối đa\n" " -v\tkích cỡ của bộ nhớ ảo\n" " -x\tsố khoá tập tin tối đa\n" "\n" " Nếu có GIỚI_HẠN thì nó là giá trị mới của tài nguyên được ghi. Ba\n" " giá trị GIỚI_HẠN đặc biệt `soft', `hard' và `unlimited' tương ứng\n" " là giới hạn mềm hiện tại, giới hạn cứng hiện tại và không giới\n" " hạn. Không có thì in giá trị hiện thời của tài nguyên được ghi.\n" " Ngầm định `-f' nếu không xác định tuỳ chọn.\n" "\n" " Giá trị tính theo khối 1024 byte, trừ -t tính theo giây, -p theo\n" " khối 512 byte và -u theo số tiến trình.\n" "\n" " Trạng thái thoát:\n" " Trả lại thành công nếu không đưa ra tùy chọn sai hay gặp lỗi." #: builtins.c:1444 msgid "" "Display or set file mode mask.\n" " \n" " Sets the user file-creation mask to MODE. If MODE is omitted, prints\n" " the current value of the mask.\n" " \n" " If MODE begins with a digit, it is interpreted as an octal number;\n" " otherwise it is a symbolic mode string like that accepted by chmod(1).\n" " \n" " Options:\n" " -p\tif MODE is omitted, output in a form that may be reused as input\n" " -S\tmakes the output symbolic; otherwise an octal number is output\n" " \n" " Exit Status:\n" " Returns success unless MODE is invalid or an invalid option is given." msgstr "" "Hiển thị hoặc đặt mặt nạ chế độ tập tin.\n" "\n" " Đặt mặt nạ tạo tập tin của người dùng thành CHẾ_ĐỘ. Không tham số\n" " thì in chế độ hiện thời.\n" "\n" " Nếu CHẾ_ĐỘ bắt đầu bằng chữ số thì hiểu là số bát phân; không thì\n" " nó là chuỗi chế độ tượng trưng được chmod(1) chấp nhận.\n" "\n" " Tùy chọn:\n" " -p\tkhông có CHẾ_ĐỘ thì xuất theo định dạng dùng lại\n" " \tlàm dữ liệu nhập được\n" " -S\tin kết xuất tượng trưng thay vì bát phân\n" "\n" " Trạng thái thoát:\n" " Trả lại thành công nếu không có CHẾ_ĐỘ sai hay tùy chọn sai." #: builtins.c:1464 msgid "" "Wait for job completion and return exit status.\n" " \n" " Waits for the process identified by ID, which may be a process ID or a\n" " job specification, and reports its termination status. If ID is not\n" " given, waits for all currently active child processes, and the return\n" " status is zero. If ID is a a job specification, waits for all processes\n" " in the job's pipeline.\n" " \n" " Exit Status:\n" " Returns the status of ID; fails if ID is invalid or an invalid option is\n" " given." msgstr "" "Chờ công việc chạy xong và trả về trạng thái thoát.\n" "\n" " Đợi tiến trình xác định bởi ID, có thể là mã số tiến trình hay đặc\n" " tả công việc, sau đó trả về trạng thái kết thúc của nó. Không có\n" " ID thì đợi tất cả các tiến trình con đang chạy và trạng thái trả\n" " về là không. Nếu ID là đặc tả công việc thì đợi tất cả các tiến\n" " trình vẫn nằm trong ống dẫn của công việc đó.\n" "\n" " Trạng thái thoát:\n" " Trả lại trạng thái của ID; không thành công nếu ID sai hoặc đưa\n" " ra tùy chọn sai." #: builtins.c:1482 msgid "" "Wait for process completion and return exit status.\n" " \n" " Waits for the specified process and reports its termination status. If\n" " PID is not given, all currently active child processes are waited for,\n" " and the return code is zero. PID must be a process ID.\n" " \n" " Exit Status:\n" " Returns the status of ID; fails if ID is invalid or an invalid option is\n" " given." msgstr "" "Đợi tiến trình chạy xong và trả về trạng thái thoát.\n" "\n" " Đợi tiến trình xác định chạy xong và trả về trạng thái kết thúc\n" " của nó. Nếu không có PID thì đợi tất cả các tiến trình con đang\n" " chạy, và mã về mã không. PID phải là mã số tiến trình.\n" "\n" " Trạng thái thoát:\n" " Trả lại trạng thái của ID; không thành công nếu ID sai, hoặc nếu\n" " đưa ra tùy chọn sai." #: builtins.c:1497 msgid "" "Execute commands for each member in a list.\n" " \n" " The `for' loop executes a sequence of commands for each member in a\n" " list of items. If `in WORDS ...;' is not present, then `in \"$@\"' is\n" " assumed. For each element in WORDS, NAME is set to that element, and\n" " the COMMANDS are executed.\n" " \n" " Exit Status:\n" " Returns the status of the last command executed." msgstr "" "Thực thi lệnh cho mỗi phần tử của danh sách.\n" "\n" " Vòng lặp `for' thực thi lệnh cho mỗi phần tử của danh sách. Không\n" " ghi `in TỪ ...' thì ngầm định `in \"$@\"'. Đối với mỗi phần tử trong\n" " danh sách, đặt giá trị phần tử đó cho biến TÊN rồi thực thi LỆNH.\n" "\n" " Trạng thái thoát:\n" " Trả lại trạng thái của câu lệnh cuối cùng được chạy." #: builtins.c:1511 msgid "" "Arithmetic for loop.\n" " \n" " Equivalent to\n" " \t(( EXP1 ))\n" " \twhile (( EXP2 )); do\n" " \t\tCOMMANDS\n" " \t\t(( EXP3 ))\n" " \tdone\n" " EXP1, EXP2, and EXP3 are arithmetic expressions. If any expression is\n" " omitted, it behaves as if it evaluates to 1.\n" " \n" " Exit Status:\n" " Returns the status of the last command executed." msgstr "" "Số học cho vòng lặp.\n" "\n" " Tương đương với:\n" " \t(( BTHỨC1 ))\n" " \twhile (( BTHỨC2 )); do\n" " \t\tLỆNH\n" " \t\t(( BTHỨC3 ))\n" " \tdone\n" " BTHỨC1, BTHỨC2 và BTHỨC3 là biểu thức số học. Ngầm định 1 cho bất\n" " kì biểu thức bỏ trống nào.\n" "\n" " Trạng thái thoát:\n" " Trả lại trạng thái của câu lệnh cuối cùng được chạy." #: builtins.c:1529 msgid "" "Select words from a list and execute commands.\n" " \n" " The WORDS are expanded, generating a list of words. The\n" " set of expanded words is printed on the standard error, each\n" " preceded by a number. If `in WORDS' is not present, `in \"$@\"'\n" " is assumed. The PS3 prompt is then displayed and a line read\n" " from the standard input. If the line consists of the number\n" " corresponding to one of the displayed words, then NAME is set\n" " to that word. If the line is empty, WORDS and the prompt are\n" " redisplayed. If EOF is read, the command completes. Any other\n" " value read causes NAME to be set to null. The line read is saved\n" " in the variable REPLY. COMMANDS are executed after each selection\n" " until a break command is executed.\n" " \n" " Exit Status:\n" " Returns the status of the last command executed." msgstr "" "Chọn từ từ danh sách và thực thi lệnh.\n" "\n" " TỪ được bung, phát sinh danh sách từ. Tập hợp các từ kết quả được\n" " in ra đầu ra lỗi chuẩn với một con số ở phía trước. Ngầm định `in\n" " \"$@\"' nếu không có `in TỪ'. Dấu nhắc PS3 được hiển thị và một dòng\n" " được đọc từ đầu nhập chuẩn. Nếu dòng bao gồm số tương ứng với từ\n" " hiển thị thì đặt từ đó vào biến TÊN. Nếu dòng rỗng thì hiển thị\n" " lại TỪ và dấu nhắc. Nếu gặp EOF thì kết thúc. Đặt TÊN là rỗng với\n" " các giá trị khác. Dòng đọc được lưu vào biến REPLY. LỆNH được thực\n" " thi sau mỗi lần chọn đến khi gặp lệnh `break'.\n" "\n" "\n" " Trạng thái thoát:\n" " Trả lại trạng thái của câu lệnh cuối cùng được chạy." #: builtins.c:1550 msgid "" "Report time consumed by pipeline's execution.\n" " \n" " Execute PIPELINE and print a summary of the real time, user CPU time,\n" " and system CPU time spent executing PIPELINE when it terminates.\n" " \n" " Options:\n" " -p\tprint the timing summary in the portable Posix format\n" " \n" " The value of the TIMEFORMAT variable is used as the output format.\n" " \n" " Exit Status:\n" " The return status is the return status of PIPELINE." msgstr "" "Thông báo thời gian sử dụng để thực thi ống dẫn.\n" "\n" " Thực thi ỐNG-DẪN và in tóm tắt thời gian thật, thời gian CPU người\n" " dùng, và thời gian CPU hệ thống được dùng để thực thi ống dẫn đến\n" " khi chấm dứt.\n" "\n" " Tùy chọn:\n" " -p\tin bản tóm tắt thời gian theo định dạng POSIX\n" "\n" " Giá trị biến TIMEFORMAT được dùng làm định dạng kết xuất.\n" "\n" " Trạng thái thoát:\n" " Trạng thái trả lai là trạng thái trả về của ỐNG-DẪN." #: builtins.c:1567 msgid "" "Execute commands based on pattern matching.\n" " \n" " Selectively execute COMMANDS based upon WORD matching PATTERN. The\n" " `|' is used to separate multiple patterns.\n" " \n" " Exit Status:\n" " Returns the status of the last command executed." msgstr "" "Thực thi lệnh chọn theo mẫu.\n" "\n" " Thực thi LỆNH một cách chọn dựa vào TỪ tương ứng với MẪU. Nhiều\n" " mẫu cách nhau bằng `|'.\n" "\n" " Trạng thái thoát:\n" " Trả lại trạng thái của câu lệnh cuối cùng được chạy." #: builtins.c:1579 msgid "" "Execute commands based on conditional.\n" " \n" " The `if COMMANDS' list is executed. If its exit status is zero, then the\n" " `then COMMANDS' list is executed. Otherwise, each `elif COMMANDS' list is\n" " executed in turn, and if its exit status is zero, the corresponding\n" " `then COMMANDS' list is executed and the if command completes. Otherwise,\n" " the `else COMMANDS' list is executed, if present. The exit status of the\n" " entire construct is the exit status of the last command executed, or zero\n" " if no condition tested true.\n" " \n" " Exit Status:\n" " Returns the status of the last command executed." msgstr "" "Thực thi câu lệnh có điều kiện.\n" "\n" " Danh sách `if LỆNH' được thực thi. Nếu trạng thái thoát là không,\n" " thì thực thi danh sách `then LỆNH'. Không thì thực thi lần lượt\n" " mỗi danh sách `elif LỆNH', và nếu trạng thái thoát là không, thì\n" " thực thi danh sách `then LỆNH' tương ứng và hoàn tất lệnh\n" " `if'. Không thì thực thi danh sách `else LỆNH' nếu có. Trạng thái\n" " thoát của toàn bộ lệnh `if' là trạng thái của lệnh cuối cùng được\n" " chạy, hoặc không nếu không có điều kiện nào trả về kết quả là\n" " đúng.\n" "\n" " Trạng thái thoát:\n" " Trả lại trạng thái của câu lệnh cuối cùng được chạy." #: builtins.c:1596 msgid "" "Execute commands as long as a test succeeds.\n" " \n" " Expand and execute COMMANDS as long as the final command in the\n" " `while' COMMANDS has an exit status of zero.\n" " \n" " Exit Status:\n" " Returns the status of the last command executed." msgstr "" "Thực thi lệnh chừng nào phép thử còn thành công.\n" "\n" " Bung và thực thi LỆNH chừng nào lệnh cuối cùng trong `while' LỆNH\n" " có trạng thái thoát là không.\n" "\n" " Trạng thái thoát:\n" " Trả lại trạng thái của câu lệnh cuối cùng được chạy." #: builtins.c:1608 msgid "" "Execute commands as long as a test does not succeed.\n" " \n" " Expand and execute COMMANDS as long as the final command in the\n" " `until' COMMANDS has an exit status which is not zero.\n" " \n" " Exit Status:\n" " Returns the status of the last command executed." msgstr "" "Thực thi lệnh chừng nào phép thử vẫn không thành công.\n" "\n" " Bung và thực thi LỆNH chừng nào lệnh cuối cùng trong `until' LỆNH\n" " có trạng thái thoát là khác không.\n" "\n" " Trạng thái thoát:\n" " Trả lại trạng thái của câu lệnh cuối cùng được chạy." #: builtins.c:1620 msgid "" "Create a coprocess named NAME.\n" " \n" " Execute COMMAND asynchronously, with the standard output and standard\n" " input of the command connected via a pipe to file descriptors assigned\n" " to indices 0 and 1 of an array variable NAME in the executing shell.\n" " The default NAME is \"COPROC\".\n" " \n" " Exit Status:\n" " Returns the exit status of COMMAND." msgstr "" "Tạo tiến trình phụ tên TÊN.\n" "\n" " Thực hiện LỆNH không đồng bộ có đầu vào/ra chuẩn nối đến ống dẫn\n" " của bộ mô tả tập tin chỉ số 0 và 1 trong biến mảng TÊN trong shell\n" " được thực thi. TÊN mặc định là \"COPROC\".\n" "\n" " Trạng thái thoát:\n" " Trả lại trạng thái thoát của câu LỆNH." #: builtins.c:1634 msgid "" "Define shell function.\n" " \n" " Create a shell function named NAME. When invoked as a simple command,\n" " NAME runs COMMANDs in the calling shell's context. When NAME is invoked,\n" " the arguments are passed to the function as $1...$n, and the function's\n" " name is in $FUNCNAME.\n" " \n" " Exit Status:\n" " Returns success unless NAME is readonly." msgstr "" "Định nghĩa hàm shell.\n" "\n" " Tạo hàm shell tên TÊN. Khi được gọi dưới dạng một câu lệnh đơn\n" " giản, TÊN chạy LỆNH trong ngữ cảnh của shell gọi. Khi TÊN được\n" " gọi, các đối số được gửi cho hàm dạng $1...$n, và tên hàm nằm\n" " trong $FUNCNAME.\n" "\n" " Trạng thái thoát:\n" " Trả lại thành công nếu TÊN không phải chỉ đọc." #: builtins.c:1648 msgid "" "Group commands as a unit.\n" " \n" " Run a set of commands in a group. This is one way to redirect an\n" " entire set of commands.\n" " \n" " Exit Status:\n" " Returns the status of the last command executed." msgstr "" "Nhóm lệnh làm một đơn vị.\n" "\n" " Chạy tập hợp các lệnh trong cùng một nhóm. Đây là một cách để\n" " chuyển hướng toàn bộ một nhóm lệnh.\n" "\n" " Trạng thái thoát:\n" " Trả lại trạng thái của câu lệnh cuối cùng được chạy." #: builtins.c:1660 msgid "" "Resume job in foreground.\n" " \n" " Equivalent to the JOB_SPEC argument to the `fg' command. Resume a\n" " stopped or background job. JOB_SPEC can specify either a job name\n" " or a job number. Following JOB_SPEC with a `&' places the job in\n" " the background, as if the job specification had been supplied as an\n" " argument to `bg'.\n" " \n" " Exit Status:\n" " Returns the status of the resumed job." msgstr "" "Tiếp tục lại công việc ở trước.\n" "\n" " Tương đương với đối số đặc tả công việc ĐTCV trong lệnh `fg'.\n" " Tiếp tục lại công việc bị dừng chạy hay chạy nền. ĐTCV có thể xác\n" " định tên công việc hoặc mã số công việc. Đặt `&' sau ĐTCV sẽ chạy\n" " công việc ở nền, như là đối số đặc tả công việc trong `bg'.\n" "\n" " Trạng thái thoát:\n" " Trả lại trạng thái của công việc đã tiếp tục lại." #: builtins.c:1675 msgid "" "Evaluate arithmetic expression.\n" " \n" " The EXPRESSION is evaluated according to the rules for arithmetic\n" " evaluation. Equivalent to \"let EXPRESSION\".\n" " \n" " Exit Status:\n" " Returns 1 if EXPRESSION evaluates to 0; returns 0 otherwise." msgstr "" "Định giá biểu thức số học.\n" "\n" " BTHỨC được tính tùy theo các quy tắc về định giá số học.\n" " Tương đương với `let BTHỨC'.\n" "\n" " Trạng thái thoát:\n" " Trả lại 1 nếu BTHỨC tính là 0; không thì trả lại 0." #: builtins.c:1687 msgid "" "Execute conditional command.\n" " \n" " Returns a status of 0 or 1 depending on the evaluation of the conditional\n" " expression EXPRESSION. Expressions are composed of the same primaries used\n" " by the `test' builtin, and may be combined using the following operators:\n" " \n" " ( EXPRESSION )\tReturns the value of EXPRESSION\n" " ! EXPRESSION\t\tTrue if EXPRESSION is false; else false\n" " EXPR1 && EXPR2\tTrue if both EXPR1 and EXPR2 are true; else false\n" " EXPR1 || EXPR2\tTrue if either EXPR1 or EXPR2 is true; else false\n" " \n" " When the `==' and `!=' operators are used, the string to the right of\n" " the operator is used as a pattern and pattern matching is performed.\n" " When the `=~' operator is used, the string to the right of the operator\n" " is matched as a regular expression.\n" " \n" " The && and || operators do not evaluate EXPR2 if EXPR1 is sufficient to\n" " determine the expression's value.\n" " \n" " Exit Status:\n" " 0 or 1 depending on value of EXPRESSION." msgstr "" "Thực thi câu lệnh có điều kiện.\n" "\n" " Trả về trạng thái 0 hoặc 1 tuỳ vào phép tính biểu thức điều kiện\n" " BTHỨC. Biểu thức bao gồm các thành phần dùng trong lệnh dựng sẵn\n" " `test', và có thể được tổ hợp bằng các toán tử sau:\n" " \n" " ( BTHỨC )\t\tTrả về giá trị của BTHỨC\n" " ! BTHỨC\t\tĐúng nếu BTHỨC là không đúng. Ngược lại sai\n" " BTHỨC1 && BTHỨC2\tĐúng nếu cả hai biểu thức đều đúng. Ngược lại sai.\n" " BTHỨC1 || BTHỨC2\tĐúng nếu một trong hai biểu thức đúng. Ngược lại sai.\n" " \n" " Khi dùng toán từ `==' và `!=', chuỗi bên phải toán tử được dùng\n" " làm mẫu, và thực hiện khớp mẫu. Khi dùng toán tử `=~', chuỗi bên\n" " phải toán tử được dùng làm biểu thức chính quy.\n" "\n" " Toán tử `&&' và `||' không tính BTHỨC2 nếu BTHỨC1 đủ để xác định\n" " giá trị toàn biểu thức.\n" "\n" " Trạng thái thoát:\n" " 0 hay 1 phụ thuộc vào giá trị của BTHỨC." #: builtins.c:1713 msgid "" "Common shell variable names and usage.\n" " \n" " BASH_VERSION\tVersion information for this Bash.\n" " CDPATH\tA colon-separated list of directories to search\n" " \t\tfor directories given as arguments to `cd'.\n" " GLOBIGNORE\tA colon-separated list of patterns describing filenames to\n" " \t\tbe ignored by pathname expansion.\n" " HISTFILE\tThe name of the file where your command history is stored.\n" " HISTFILESIZE\tThe maximum number of lines this file can contain.\n" " HISTSIZE\tThe maximum number of history lines that a running\n" " \t\tshell can access.\n" " HOME\tThe complete pathname to your login directory.\n" " HOSTNAME\tThe name of the current host.\n" " HOSTTYPE\tThe type of CPU this version of Bash is running under.\n" " IGNOREEOF\tControls the action of the shell on receipt of an EOF\n" " \t\tcharacter as the sole input. If set, then the value\n" " \t\tof it is the number of EOF characters that can be seen\n" " \t\tin a row on an empty line before the shell will exit\n" " \t\t(default 10). When unset, EOF signifies the end of input.\n" " MACHTYPE\tA string describing the current system Bash is running on.\n" " MAILCHECK\tHow often, in seconds, Bash checks for new mail.\n" " MAILPATH\tA colon-separated list of filenames which Bash checks\n" " \t\tfor new mail.\n" " OSTYPE\tThe version of Unix this version of Bash is running on.\n" " PATH\tA colon-separated list of directories to search when\n" " \t\tlooking for commands.\n" " PROMPT_COMMAND\tA command to be executed before the printing of each\n" " \t\tprimary prompt.\n" " PS1\t\tThe primary prompt string.\n" " PS2\t\tThe secondary prompt string.\n" " PWD\t\tThe full pathname of the current directory.\n" " SHELLOPTS\tA colon-separated list of enabled shell options.\n" " TERM\tThe name of the current terminal type.\n" " TIMEFORMAT\tThe output format for timing statistics displayed by the\n" " \t\t`time' reserved word.\n" " auto_resume\tNon-null means a command word appearing on a line by\n" " \t\titself is first looked for in the list of currently\n" " \t\tstopped jobs. If found there, that job is foregrounded.\n" " \t\tA value of `exact' means that the command word must\n" " \t\texactly match a command in the list of stopped jobs. A\n" " \t\tvalue of `substring' means that the command word must\n" " \t\tmatch a substring of the job. Any other value means that\n" " \t\tthe command must be a prefix of a stopped job.\n" " histchars\tCharacters controlling history expansion and quick\n" " \t\tsubstitution. The first character is the history\n" " \t\tsubstitution character, usually `!'. The second is\n" " \t\tthe `quick substitution' character, usually `^'. The\n" " \t\tthird is the `history comment' character, usually `#'.\n" " HISTIGNORE\tA colon-separated list of patterns used to decide which\n" " \t\tcommands should be saved on the history list.\n" msgstr "" "Tên và cách dùng các biến shell thường dùng.\n" "\n" " BASH_VERSION\n" " \tThông tin phiên bản của Bash đang chạy.\n" " CDPATH\tDanh sách thư mục cách nhau bằng dấu hai chấm để tìm\n" " \tđối số thư mục trong lệnh `cd'.\n" " GLOBIGNORE\tDanh sách mẫu cách nhau bằng dấu hai chấm diễn tả\n" " \ttên tập tin bị bỏ qua không bung đường dẫn.\n" " HISTFILE\tTên tập tin chứa lịch sử câu lệnh của bạn.\n" " HISTFILESIZE\n" " \tSố dòng tối đa tập tin này có thể chứa.\n" " HISTSIZE\tSố dòng tối đa mà shell đang chạy có thể truy cập.\n" " HOME\tTên đường dẫn đầy đủ của thư mục đăng nhập của bạn.\n" " HOSTNAME\tTên của máy hiện thời của bạn.\n" " HOSTTYPE\tLoại CPU phiên bản Bash này đang chạy.\n" " IGNOREEOF\tĐiều khiển hành vi shell khi nhận EOF là dữ liệu nhập\n" " \tduy nhất. Đặt thì giá trị của nó là EOF có thể gặp\n" " \tliên tục trên một dòng rỗng trước khi shell kết thúc\n" " \t(mặc định là 10). Không đặt thì EOF nghĩa là kết thúc\n" " \tnhập.\n" " MACHTYPE\tChuỗi mô tả hệ thống Bash đang chạy.\n" " MAILCHECK\tSố giây giữa hai lần Bash kiểm tra có thư mới không.\n" " MAILPATH\tDanh sách tên tập tin cách nhau bằng dấu hai chấm\n" " \tđể Bash kiểm tra có thư mới không.\n" " OSTYPE\tPhiên bản UNIX Bash đang chạy.\n" " PATH\tDanh sách thư mục cách nhau bằng dấu hai chấm để tìm lệnh.\n" " PROMPT_COMMAND\n" " \tLệnh cần thực hiện trước khi in dấu nhắc chính.\n" " PS1\t\tChuỗi dấu nhắc chính.\n" " PS2\t\tChuỗi dấu nhắc phụ.\n" " PWD\t\tTên đường dẫn đầy đủ của thư mục hiện tại.\n" " SHELLOPTS\tDanh sách tùy chọn shell được bật cách nhau bằng\n" " \tdấu hai chấm.\n" " TERM\tTên kiểu thiết bị cuối hiện thời.\n" " TIMEFORMAT\tĐịnh dạng kết xuất cho thống kê thời gian của lệnh `time'.\n" " auto_resume\tGiá trị khác rỗng thì trước tiên tìm một từ lệnh xuất\n" " \thiện một mình trên một dòng, trong danh sách các công\n" " \tviệc bị dừng chạy. Tìm ra thì đặt công việc đó vào nền\n" " \ttrước. Giá trị `exact' có nghĩa là từ lệnh phải tương\n" " \tứng chính xác với một câu lệnh trong danh sách các\n" " \tcông việc bị dừng chạy. Giá trị `substring' có nghĩa\n" " \tlà từ lệnh phải tương ứng với một chuỗi phụ của công\n" " \tviệc đó.\n" " histchars\tCác ký tự điều khiển bung và thay thế lịch sử. Ký tự\n" " \tđầu tiên thường là ký tự thay thế lịch sử, thường là\n" " \t`!'. Ký tự thứ hai là ký tự thay thế nhanh, thường là\n" " \t`^'. Ký tự thứ ba là ký tự ghi chú về lịch sử, thường\n" " \tlà `#'.\n" " HISTIGNORE\tDanh sách mẫu cách bằng dấu hai chấm dùng để quyết định\n" " \tnhững câu lệnh nào nên được lưu vào danh sách lịch sử.\n" #: builtins.c:1770 msgid "" "Add directories to stack.\n" " \n" " Adds a directory to the top of the directory stack, or rotates\n" " the stack, making the new top of the stack the current working\n" " directory. With no arguments, exchanges the top two directories.\n" " \n" " Options:\n" " -n\tSuppresses the normal change of directory when adding\n" " \tdirectories to the stack, so only the stack is manipulated.\n" " \n" " Arguments:\n" " +N\tRotates the stack so that the Nth directory (counting\n" " \tfrom the left of the list shown by `dirs', starting with\n" " \tzero) is at the top.\n" " \n" " -N\tRotates the stack so that the Nth directory (counting\n" " \tfrom the right of the list shown by `dirs', starting with\n" " \tzero) is at the top.\n" " \n" " dir\tAdds DIR to the directory stack at the top, making it the\n" " \tnew current working directory.\n" " \n" " The `dirs' builtin displays the directory stack.\n" " \n" " Exit Status:\n" " Returns success unless an invalid argument is supplied or the directory\n" " change fails." msgstr "" "Thêm thư mục vào chồng.\n" "\n" " Thêm thư mục vào đầu của chồng thư mục, hoặc xoay chồng, làm cho\n" " thư mục mới đầu chồng là thư mục làm việc hiện thời. Không có đối\n" " số thì trao đổi hai thư mục đầu.\n" "\n" " -n\tNgăn chuyển đổi bình thường khi thêm thư mục\n" " \tvào chồng, để thao tác chỉ chồng.\n" "\n" " +N\tXoay chồng để thư mục thứ N (đếm từ trái danh sách\n" " \t`dirs', bắt đầu từ số không) dời lên đầu.\n" "\n" " -N\tXoay chồng để thư mục thứ N (đếm từ phải danh sách\n" " \t`dirs', bắt đầu từ số không) dời lên đầu.\n" "\n" " dir\tThêm THMỤC vào đầu chồng thư mục, cho nó làm thư mục\n" " \tlàm việc hiện thời mới.\n" "\n" " Lệnh dựng sẵn `dirs' hiển thị chồng thư mục.\n" "\n" " Trạng thái thoát:\n" " Trả lại thành công nếu không đưa ra đối số sai, cũng không sai\n" " chuyển đổi thư mục." #: builtins.c:1804 msgid "" "Remove directories from stack.\n" " \n" " Removes entries from the directory stack. With no arguments, removes\n" " the top directory from the stack, and changes to the new top directory.\n" " \n" " Options:\n" " -n\tSuppresses the normal change of directory when removing\n" " \tdirectories from the stack, so only the stack is manipulated.\n" " \n" " Arguments:\n" " +N\tRemoves the Nth entry counting from the left of the list\n" " \tshown by `dirs', starting with zero. For example: `popd +0'\n" " \tremoves the first directory, `popd +1' the second.\n" " \n" " -N\tRemoves the Nth entry counting from the right of the list\n" " \tshown by `dirs', starting with zero. For example: `popd -0'\n" " \tremoves the last directory, `popd -1' the next to last.\n" " \n" " The `dirs' builtin displays the directory stack.\n" " \n" " Exit Status:\n" " Returns success unless an invalid argument is supplied or the directory\n" " change fails." msgstr "" "Gỡ bỏ thư mục khỏi chồng.\n" "\n" " Gỡ bỏ thư mục khỏi chồng thư mục. Không có đối số thì gỡ bỏ thư\n" " mục đầu khỏi chồng và `cd' sang thư mục đầu mới.\n" "\n" " -n\tNgăn chuyển đổi bình thường khi gỡ bỏ thư mục\n" " \tkhỏi chồng, để thao tác chỉ chồng.\n" "\n" " +N\tGỡ bỏ thư mục thứ N (đếm từ trái danh sách\n" " \t`dirs', bắt đầu từ số không). Ví dụ: `popd +0' bỏ\n" " \tthư mục cuối cùng, `popd +1' bỏ thư mục thứ hai.\n" "\n" " -N\tGỡ bỏ thư mục thứ N (đếm từ phải danh sách\n" " \t`dirs', bắt đầu từ số không). Ví dụ: `popd -0' bỏ\n" " \tthư mục cuối cùng, `popd -1' bỏ thư mục giáp cuối.\n" "\n" " Lệnh dựng sẵn `dirs' hiển thị đống thư mục.\n" "\n" " Trạng thái thoát:\n" " Trả lại thành công nếu không đưa ra đối số sai, cũng không sai\n" " chuyển đổi thư mục." #: builtins.c:1834 msgid "" "Display directory stack.\n" " \n" " Display the list of currently remembered directories. Directories\n" " find their way onto the list with the `pushd' command; you can get\n" " back up through the list with the `popd' command.\n" " \n" " Options:\n" " -c\tclear the directory stack by deleting all of the elements\n" " -l\tdo not print tilde-prefixed versions of directories relative\n" " \tto your home directory\n" " -p\tprint the directory stack with one entry per line\n" " -v\tprint the directory stack with one entry per line prefixed\n" " \twith its position in the stack\n" " \n" " Arguments:\n" " +N\tDisplays the Nth entry counting from the left of the list shown by\n" " \tdirs when invoked without options, starting with zero.\n" " \n" " -N\tDisplays the Nth entry counting from the right of the list shown by\n" " \tdirs when invoked without options, starting with zero.\n" " \n" " Exit Status:\n" " Returns success unless an invalid option is supplied or an error occurs." msgstr "" "Hiển thị chồng thư mục.\n" "\n" " Hiển thị danh sách các thư mục được nhớ hiện thời. Lệnh `pushd'\n" " thêm thư mục vào danh sách; lệnh `popd' lấy thư mục khỏi danh\n" " sách.\n" "\n" " Tùy chọn:\n" " -c\txoá mọi phần tử trong chồng thư mục\n" " -l\tđừng in phiên bản thư mục có dấu ngã\n" " \t(tương đối so với thư mục chính của người dùng)\n" " -p\tin chồng thư mục, mỗi dòng một mục\n" " -v\tin chồng thư mục, mỗi dòng một mục kèm vị trí trong chồng\n" "\n" " Đối số:\n" " +N\thiển thị mục thứ N bắt đầu từ bên trái danh sách\n" " được hiển thị bằng `dirs' khi được gọi mà không đưa ra\n" " tùy chọn, bắt đầu từ số không.\n" "\n" " -N\thiển thị mục thứ N bắt đầu từ bên phải danh sách\n" " được hiển thị bằng `dirs' khi được gọi mà không đưa ra\n" " tùy chọn, bắt đầu từ số không.\n" "\n" " Trạng thái thoát:\n" " Trả về thành công nếu không đưa ra tùy chọn sai hay gặp lỗi." #: builtins.c:1863 msgid "" "Set and unset shell options.\n" " \n" " Change the setting of each shell option OPTNAME. Without any option\n" " arguments, list all shell options with an indication of whether or not each\n" " is set.\n" " \n" " Options:\n" " -o\trestrict OPTNAMEs to those defined for use with `set -o'\n" " -p\tprint each shell option with an indication of its status\n" " -q\tsuppress output\n" " -s\tenable (set) each OPTNAME\n" " -u\tdisable (unset) each OPTNAME\n" " \n" " Exit Status:\n" " Returns success if OPTNAME is enabled; fails if an invalid option is\n" " given or OPTNAME is disabled." msgstr "" "Đặt và bỏ các tùy chọn shell.\n" "\n" " Thay đổi thiết lập của mỗi tùy chọn shell TÊN_TÙY_CHỌN. Không có\n" " đối số tùy chọn thì liệt kê tất cả các tùy chọn shell kèm chỉ dẫn\n" " tùy chọn được đặt hay không.\n" "\n" " Tùy chọn:\n" " -o\thạn chế TÊN_TÙY_CHỌN những tên được đĩnh nghĩa\n" " \tđể sử dụng với `set -o'\n" " -p\tin mỗi tùy chọn shell kèm trạng thái\n" " -q\tngăn kết xuất\n" " -u\ttắt TÊN_TÙY_CHỌN\n" "\n" " Trạng thái thoát:\n" " Trả lại thành công nếu TÊN_TÙY_CHỌN được bật; không thành công nếu\n" " đưa ra tùy chọn sai hay TÊN_TÙY_CHỌN bị tắt." #: builtins.c:1884 msgid "" "Formats and prints ARGUMENTS under control of the FORMAT.\n" " \n" " Options:\n" " -v var\tassign the output to shell variable VAR rather than\n" " \t\tdisplay it on the standard output\n" " \n" " FORMAT is a character string which contains three types of objects: plain\n" " characters, which are simply copied to standard output; character escape\n" " sequences, which are converted and copied to the standard output; and\n" " format specifications, each of which causes printing of the next successive\n" " argument.\n" " \n" " In addition to the standard format specifications described in printf(1)\n" " and printf(3), printf interprets:\n" " \n" " %b\texpand backslash escape sequences in the corresponding argument\n" " %q\tquote the argument in a way that can be reused as shell input\n" " %(fmt)T output the date-time string resulting from using FMT as a format\n" " string for strftime(3)\n" " \n" " Exit Status:\n" " Returns success unless an invalid option is given or a write or assignment\n" " error occurs." msgstr "" "Định dạng và in ĐỐI-SỐ tùy theo điều khiển của ĐỊNH_DẠNG.\n" "\n" " Tùy chọn:\n" " -v BIẾN\tgán kết xuất cho biến shell này thay vì\n" " \thiển thị nó trên đầu ra chuẩn\n" "\n" " ĐỊNH_DẠNG là chuỗi ký tự mà chứa ba kiểu đối tượng: ký tự bình\n" " thường, được sao chép sang đầu ra chuẩn; dãy ký tự thoát, dùng để\n" " chuyển đổi sau đó sao chép sang đầu ra chuẩn; và đặc tả định dạng,\n" " mỗi đặc tả tác động lên đối số kế tiếp.\n" "\n" " Ngoài đặc tả định dạng chuẩn được trong printf(1) và printf(3),\n" " printf được hiểu những đặc tả sau:\n" "\n" " %b\tbung dãy thoát gạch chéo ngược trong đối số tương ứng\n" " %q\ttrích dẫn đối số theo cách dùng lại làm dữ liệu đầu vào shell\n" " %(fmt)T\txuất chuỗi ngày tháng theo định dạng FMT từ strftime(3)\n" "\n" " Trạng thái thoát:\n" " Trả lại thành công trừ phi đưa ra tùy chọn sai hay gặp lỗi khi ghi\n" " hay gán." #: builtins.c:1913 msgid "" "Specify how arguments are to be completed by Readline.\n" " \n" " For each NAME, specify how arguments are to be completed. If no options\n" " are supplied, existing completion specifications are printed in a way that\n" " allows them to be reused as input.\n" " \n" " Options:\n" " -p\tprint existing completion specifications in a reusable format\n" " -r\tremove a completion specification for each NAME, or, if no\n" " \tNAMEs are supplied, all completion specifications\n" " -D\tapply the completions and actions as the default for commands\n" " \twithout any specific completion defined\n" " -E\tapply the completions and actions to \"empty\" commands --\n" " \tcompletion attempted on a blank line\n" " \n" " When completion is attempted, the actions are applied in the order the\n" " uppercase-letter options are listed above. The -D option takes\n" " precedence over -E.\n" " \n" " Exit Status:\n" " Returns success unless an invalid option is supplied or an error occurs." msgstr "" "Xác định cách hoàn thành đối số bằng Readline.\n" "\n" " Đối với mỗi TÊN, ghi rõ các đối số sẽ được điền nốt như thế nào.\n" " Không đưa ra tùy chọn thì in ra các đặc tả điền nốt bằng một cách\n" " cho phép dùng lại đặc tả làm dữ liệu nhập vào.\n" "\n" " Tùy chọn:\n" " -p\tin đặc tả điền nốt đã tồn tại theo định dạng dùng lại được\n" " -r\tgỡ bỏ đặc tả điền nốt cho mỗi TÊN,\n" " \thoặc nếu có TÊN thì gỡ bỏ tất cả các đặc tả điền nốt\n" " -D\táp dụng các sự hoàn thành và hành động làm mặc định\n" "\t\tcho câu lệnh mà không xác định sự hoàn thành riêng\n" " -E\táp dụng các sự hoàn thành và hành động cho câu lệnh `trống'\n" "\t\t(empty) -- thử hoàn thành trên dòng trắng\n" "\n" " Khi chức năng điền nốt được thử, những hành động được làm theo thứ\n" " tự của những tùy chọn chữ hoa bên trên.\n" "\n" " Trạng thái thoát:\n" " Trả lại thành công nếu không đưa ra tùy chọn sai hay gặp lỗi." #: builtins.c:1941 msgid "" "Display possible completions depending on the options.\n" " \n" " Intended to be used from within a shell function generating possible\n" " completions. If the optional WORD argument is supplied, matches against\n" " WORD are generated.\n" " \n" " Exit Status:\n" " Returns success unless an invalid option is supplied or an error occurs." msgstr "" "Hiển thị hoàn thành có thể tuỳ vào tùy chọn.\n" "\n" " Dự định dùng từ bên trong một chức năng shell mà tạo các việc\n" " điền nốt có thể làm. Nếu đưa ra đối số TỪ vẫn tùy chọn, thì tạo\n" " các kết quả tương ứng với TỪ.\n" "\n" " Trạng thái thoát:\n" " Trả lại thành công nếu không đưa ra tùy chọn sai hay gặp lỗi." #: builtins.c:1956 msgid "" "Modify or display completion options.\n" " \n" " Modify the completion options for each NAME, or, if no NAMEs are supplied,\n" " the completion currently being executed. If no OPTIONs are given, print\n" " the completion options for each NAME or the current completion specification.\n" " \n" " Options:\n" " \t-o option\tSet completion option OPTION for each NAME\n" " \t-D\t\tChange options for the \"default\" command completion\n" " \t-E\t\tChange options for the \"empty\" command completion\n" " \n" " Using `+o' instead of `-o' turns off the specified option.\n" " \n" " Arguments:\n" " \n" " Each NAME refers to a command for which a completion specification must\n" " have previously been defined using the `complete' builtin. If no NAMEs\n" " are supplied, compopt must be called by a function currently generating\n" " completions, and the options for that currently-executing completion\n" " generator are modified.\n" " \n" " Exit Status:\n" " Returns success unless an invalid option is supplied or NAME does not\n" " have a completion specification defined." msgstr "" "Sửa đổi hoặc hiển thị các tùy chọn điền nốt.\n" "\n" " Sửa đổi các tùy chọn điền nốt đối với mỗi TÊN, hoặc nếu không đưa\n" " ra TÊN thì chức năng điền nốt hiện tại sẽ được thi hành, nếu không\n" " TÙY_CHỌN được chỉ ra, in ra các tùy chọn điền nốt cho mỗi TÊN hay\n" " các đặc tính kỹ thuật hiện có\n" "\n" " Tùy chọn:\n" " -o tùy_chọn\tđặt TÙY_CHỌN điền nốt này đối với mỗi TÊN\n" " -D\t\tSửa TÙY_CHỌN về điền nốt lệnh `default '\n" " -E\t\tSửa TÙY_CHỌN về điền nốt lệnh `empty'\n" "\n" " Dùng `+o' thay cho `-o' thì tắt tùy chọn đưa ra.\n" "\n" " Đối số:\n" "\n" " Mỗi TÊN tham chiếu đến một câu lệnh cho đó một đặc tả điền nốt\n" " phải được xác định trước dùng dựng sẵn `complete'. Nếu không đưa\n" " ra TÊN để áp dụng, thì `compopt' phải được gọi bởi một hàm đang\n" " tạo việc điền nốt, và các tùy chọn về hàm tạo việc điền nốt đang\n" " chạy cũng được sửa đổi.\n" "\n" " Trạng thái thoát:\n" " Trả lại thành công trừ phi đưa ra tùy chọn sai, hoặc TÊN có một\n" " đặc tả điền nốt được xác định." #: builtins.c:1986 msgid "" "Read lines from the standard input into an indexed array variable.\n" " \n" " Read lines from the standard input into the indexed array variable ARRAY, or\n" " from file descriptor FD if the -u option is supplied. The variable MAPFILE\n" " is the default ARRAY.\n" " \n" " Options:\n" " -n count\tCopy at most COUNT lines. If COUNT is 0, all lines are copied.\n" " -O origin\tBegin assigning to ARRAY at index ORIGIN. The default index is 0.\n" " -s count \tDiscard the first COUNT lines read.\n" " -t\t\tRemove a trailing newline from each line read.\n" " -u fd\t\tRead lines from file descriptor FD instead of the standard input.\n" " -C callback\tEvaluate CALLBACK each time QUANTUM lines are read.\n" " -c quantum\tSpecify the number of lines read between each call to CALLBACK.\n" " \n" " Arguments:\n" " ARRAY\t\tArray variable name to use for file data.\n" " \n" " If -C is supplied without -c, the default quantum is 5000. When\n" " CALLBACK is evaluated, it is supplied the index of the next array\n" " element to be assigned and the line to be assigned to that element\n" " as additional arguments.\n" " \n" " If not supplied with an explicit origin, mapfile will clear ARRAY before\n" " assigning to it.\n" " \n" " Exit Status:\n" " Returns success unless an invalid option is given or ARRAY is readonly or\n" " not an indexed array." msgstr "" "Đọc các dòng từ đầu vào tiêu chuẩn vào một biến mảng chỉ số.\n" "\n" " Đọc các dòng từ đầu vào tiêu chuẩn vào biến mảng MẢNG, hoặc từ bộ\n" " mô tả tập tin FD nếu đưa ra tùy chọn -u. Biến MAPFILE là MẢNG mặc\n" " định.\n" "\n" " Tùy chọn:\n" " -n SỐ\tsao chép nhiều nhất SỐ dòng. Nếu SỐ là 0 thì sao chép mọi dòng.\n" " -O GỐC\tbắt đầu gán cho MẢNG ở chỉ mục GỐC. Chỉ mục mặc định là 0.\n" " -s SỐ\tbỏ qua SỐ dòng đầu tiên được đọc.\n" " -t\tgỡ bỏ một ký tự dòng mới theo sau khỏi mỗi dòng được đọc.\n" " -u FD\tđọc các dòng từ bộ mô tả tập tin FD thay vào từ đầu vào tiêu chuẩn.\n" " -C GỌI_NGƯỢC\tđịnh giá GỌI_NGƯỢC mỗi lần đọc LƯỢNG dòng.\n" " -c LƯỢNG\tghi rõ số các dòng được đọc giữa hai lần gọi GỌI_NGƯỢC.\n" "\n" " Đối số:\n" " MẢNG\ttên biến mảng cần dùng cho dữ liệu tập tin.\n" "\n" " Nếu đưa ra -C mà không có -c thì lượng mặc định là 5000. Khi ước\n" " lượng lời GỌI_NGƯỢC thì nó nhận chỉ số của phần tử mảng kế tiếp\n" " được gán dưới dạng một đối số bổ sung.\n" "\n" " Không đưa ra một GỐC dứt khoát thì mapfile (tập tin sơ đồ) sẽ xoá\n" " sạch MẢNG trước khi gán cho nó.\n" "\n" " Trạng thái thoát:\n" " Trả lại thành công trừ phi đưa ra tùy chọn sai và MẢNG không phải\n" " chỉ đọc hay không là một mảng chỉ số." #: builtins.c:2020 msgid "" "Read lines from a file into an array variable.\n" " \n" " A synonym for `mapfile'." msgstr "" "Đọc các dòng từ một tập tin vào một biến mảng.\n" "\n" " Đồng nghĩa với `mapfile'." #~ msgid "" #~ ". With EXPR, returns\n" #~ " " #~ msgstr "" #~ ". Cũng dùng BTHỨC thì trả lại\n" #~ " " #~ msgid "" #~ "; this extra information can be used to\n" #~ " provide a stack trace.\n" #~ " \n" #~ " The value of EXPR indicates how many call frames to go back before the\n" #~ " current one; the top frame is frame 0." #~ msgstr "" #~ "; thông tin thêm này có thể được sử dụng\n" #~ "\tđể cung cấp một vết đống (stack trace).\n" #~ "\n" #~ "\tGiá trị của BTHỨC ngụ ý bao nhiêu khung gọi cần lùi lại\n" #~ "\ttương đối với cái hiện thời; khung trên cùng là khung 0."