# Chinese (simplified) translation for tar. # Copyright (C) 2008 Free Software Foundation, Inc. # This file is distributed under the same license as the tar package. # Wang Li , 2002. # Rongjun Mu , 2004. # Ji ZhengYu , 2008, 2009, 2010. # msgid "" msgstr "" "Project-Id-Version: tar 1.23\n" "Report-Msgid-Bugs-To: bug-tar@gnu.org\n" "POT-Creation-Date: 2010-03-10 12:53+0200\n" "PO-Revision-Date: 2010-03-11 10:02+0800\n" "Last-Translator: Ji ZhengYu \n" "Language-Team: Chinese (simplified) \n" "X-Bugs: Report translation errors to the Language-Team address.\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8-bit\n" "Plural-Forms: nplurals=1; plural=0;\n" #: gnu/argmatch.c:135 #, c-format msgid "invalid argument %s for %s" msgstr "%2$s 的参数 %1$s 无效" #: gnu/argmatch.c:136 #, c-format msgid "ambiguous argument %s for %s" msgstr "%2$s 的参数 %1$s 具有歧义" #: gnu/argmatch.c:155 #, c-format msgid "Valid arguments are:" msgstr "有效的参数为：" #: gnu/argp-help.c:149 #, c-format msgid "ARGP_HELP_FMT: %s value is less than or equal to %s" msgstr "ARGP_HELP_FMT: %s 的值小于或者等于 %s" #: gnu/argp-help.c:222 #, c-format msgid "%.*s: ARGP_HELP_FMT parameter requires a value" msgstr "%.*s: ARGP_HELP_FMT 参数需要一个值" #: gnu/argp-help.c:228 #, c-format msgid "%.*s: ARGP_HELP_FMT parameter must be positive" msgstr "%.*s: ARGP_HELP_FMT 参数值必须为正" #: gnu/argp-help.c:237 #, c-format msgid "%.*s: Unknown ARGP_HELP_FMT parameter" msgstr "%.*s: 未知的 ARGP_HELP_FMT 参数" #: gnu/argp-help.c:249 #, c-format msgid "Garbage in ARGP_HELP_FMT: %s" msgstr "ARGP_HELP_FMT 中的参数错误: %s" #: gnu/argp-help.c:1246 msgid "Mandatory or optional arguments to long options are also mandatory or optional for any corresponding short options." msgstr "长选项和相应短选项具有相同的强制参数或可选参数。" #: gnu/argp-help.c:1639 msgid "Usage:" msgstr "用法:" #: gnu/argp-help.c:1643 msgid " or: " msgstr " 或: " #: gnu/argp-help.c:1655 msgid " [OPTION...]" msgstr " [选项...]" #: gnu/argp-help.c:1682 #, c-format msgid "Try `%s --help' or `%s --usage' for more information.\n" msgstr "请用“%s --help”或“%s --usage”获得更多信息。\n" #: gnu/argp-help.c:1710 #, c-format msgid "Report bugs to %s.\n" msgstr "将错误报告发送到 %s。\n" #: gnu/argp-help.c:1929 gnu/error.c:155 msgid "Unknown system error" msgstr "未知的系统错误" #: gnu/argp-parse.c:83 msgid "give this help list" msgstr "显示此帮助列表" #: gnu/argp-parse.c:84 msgid "give a short usage message" msgstr "显示简短的用法说明" #: gnu/argp-parse.c:85 src/tar.c:488 src/tar.c:490 src/tar.c:559 #: tests/genfile.c:131 msgid "NAME" msgstr "名称" #: gnu/argp-parse.c:85 msgid "set the program name" msgstr "设置程序名" #: gnu/argp-parse.c:86 msgid "SECS" msgstr "秒" #: gnu/argp-parse.c:87 msgid "hang for SECS seconds (default 3600)" msgstr "挂起 SECS 秒(默认 3600)" #: gnu/argp-parse.c:144 msgid "print program version" msgstr "打印程序版本" #: gnu/argp-parse.c:160 #, c-format msgid "(PROGRAM ERROR) No version known!?" msgstr "(程序错误)未知版本！？" #: gnu/argp-parse.c:613 #, c-format msgid "%s: Too many arguments\n" msgstr "%s：参数太多\n" #: gnu/argp-parse.c:756 msgid "(PROGRAM ERROR) Option should have been recognized!?" msgstr "(程序错误)选项可否被识别！？" #: gnu/closeout.c:114 msgid "write error" msgstr "写错误" #: gnu/getopt.c:531 gnu/getopt.c:547 #, c-format msgid "%s: option '%s' is ambiguous\n" msgstr "%s: 选项\"%s\"具有歧义\n" #: gnu/getopt.c:580 gnu/getopt.c:584 #, c-format msgid "%s: option '--%s' doesn't allow an argument\n" msgstr "%s: 选项\"--%s\"不需要参数\n" #: gnu/getopt.c:593 gnu/getopt.c:598 #, c-format msgid "%s: option '%c%s' doesn't allow an argument\n" msgstr "%s: 选项\"%c%s\"不需要参数\n" #: gnu/getopt.c:641 gnu/getopt.c:660 gnu/getopt.c:963 gnu/getopt.c:982 #, c-format msgid "%s: option '%s' requires an argument\n" msgstr "%s: 选项\"%s\"必须要参数\n" #: gnu/getopt.c:698 gnu/getopt.c:701 #, c-format msgid "%s: unrecognized option '--%s'\n" msgstr "%s: 无法识别的选项\"--%s\"\n" #: gnu/getopt.c:709 gnu/getopt.c:712 #, c-format msgid "%s: unrecognized option '%c%s'\n" msgstr "%s: 无法识别的选项\"%c%s\"\n" #: gnu/getopt.c:761 gnu/getopt.c:764 #, c-format msgid "%s: invalid option -- '%c'\n" msgstr "%s: 无效选项 -- \"%c\"\n" #: gnu/getopt.c:814 gnu/getopt.c:831 gnu/getopt.c:1034 gnu/getopt.c:1052 #, c-format msgid "%s: option requires an argument -- '%c'\n" msgstr "%s: 选项需要参数 -- \"%c\"\n" #: gnu/getopt.c:884 gnu/getopt.c:900 #, c-format msgid "%s: option '-W %s' is ambiguous\n" msgstr "%s: 选项\"-W %s\"具有歧义\n" #: gnu/getopt.c:924 gnu/getopt.c:942 #, c-format msgid "%s: option '-W %s' doesn't allow an argument\n" msgstr "%s: 选项\"-W %s\"不要参数\n" #: gnu/obstack.c:425 gnu/obstack.c:427 gnu/xalloc-die.c:36 msgid "memory exhausted" msgstr "内存耗尽" #: gnu/openat-die.c:36 #, c-format msgid "unable to record current working directory" msgstr "无法记录当前工作目录" #: gnu/openat-die.c:54 #, c-format msgid "failed to return to initial working directory" msgstr "无法回到起始的工作目录" #. TRANSLATORS: #. Get translations for open and closing quotation marks. #. #. The message catalog should translate "`" to a left #. quotation mark suitable for the locale, and similarly for #. "'". If the catalog has no translation, #. locale_quoting_style quotes `like this', and #. clocale_quoting_style quotes "like this". #. #. For example, an American English Unicode locale should #. translate "`" to U+201C (LEFT DOUBLE QUOTATION MARK), and #. should translate "'" to U+201D (RIGHT DOUBLE QUOTATION #. MARK). A British English Unicode locale should instead #. translate these to U+2018 (LEFT SINGLE QUOTATION MARK) #. and U+2019 (RIGHT SINGLE QUOTATION MARK), respectively. #. #. If you don't know what to put here, please see #. #. and use glyphs suitable for your language. #: gnu/quotearg.c:274 msgid "`" msgstr "“" #: gnu/quotearg.c:275 msgid "'" msgstr "”" #. TRANSLATORS: A regular expression testing for an affirmative answer #. (english: "yes"). Testing the first character may be sufficient. #. Take care to consider upper and lower case. #. To enquire the regular expression that your system uses for this #. purpose, you can use the command #. locale -k LC_MESSAGES | grep '^yesexpr=' #: gnu/rpmatch.c:149 msgid "^[yY]" msgstr "^[yY]" #. TRANSLATORS: A regular expression testing for a negative answer #. (english: "no"). Testing the first character may be sufficient. #. Take care to consider upper and lower case. #. To enquire the regular expression that your system uses for this #. purpose, you can use the command #. locale -k LC_MESSAGES | grep '^noexpr=' #: gnu/rpmatch.c:162 msgid "^[nN]" msgstr "^[nN]" #: gnu/version-etc.c:76 #, c-format msgid "Packaged by %s (%s)\n" msgstr "由 %s (%s) 打包\n" #: gnu/version-etc.c:79 #, c-format msgid "Packaged by %s\n" msgstr "由 %s 打包\n" #. TRANSLATORS: Translate "(C)" to the copyright symbol #. (C-in-a-circle), if this symbol is available in the user's #. locale. Otherwise, do not translate "(C)"; leave it as-is. #: gnu/version-etc.c:86 msgid "(C)" msgstr "(C)" #: gnu/version-etc.c:88 msgid "" "\n" "License GPLv3+: GNU GPL version 3 or later .\n" "This is free software: you are free to change and redistribute it.\n" "There is NO WARRANTY, to the extent permitted by law.\n" "\n" msgstr "" "\n" "License GPLv3+: GNU GPL version 3 or later \n" "这是自由软件：您可以自由地更改并重新发布它。\n" "在法律所允许的范围内不含任何担保。\n" "\n" #. TRANSLATORS: %s denotes an author name. #: gnu/version-etc.c:104 #, c-format msgid "Written by %s.\n" msgstr "由 %s 所写。\n" #. TRANSLATORS: Each %s denotes an author name. #: gnu/version-etc.c:108 #, c-format msgid "Written by %s and %s.\n" msgstr "由 %s 和 %s 所写。\n" #. TRANSLATORS: Each %s denotes an author name. #: gnu/version-etc.c:112 #, c-format msgid "Written by %s, %s, and %s.\n" msgstr "由 %s，%s， 和 %s 所写。\n" #. TRANSLATORS: Each %s denotes an author name. #. You can use line breaks, estimating that each author name occupies #. ca. 16 screen columns and that a screen line has ca. 80 columns. #: gnu/version-etc.c:119 #, c-format msgid "" "Written by %s, %s, %s,\n" "and %s.\n" msgstr "" "由 %s，%s，%s，\n" "和 %s 所写。\n" #. TRANSLATORS: Each %s denotes an author name. #. You can use line breaks, estimating that each author name occupies #. ca. 16 screen columns and that a screen line has ca. 80 columns. #: gnu/version-etc.c:126 #, c-format msgid "" "Written by %s, %s, %s,\n" "%s, and %s.\n" msgstr "" "由 %s，%s，%s，\n" "%s，和 %s 所写。\n" #. TRANSLATORS: Each %s denotes an author name. #. You can use line breaks, estimating that each author name occupies #. ca. 16 screen columns and that a screen line has ca. 80 columns. #: gnu/version-etc.c:133 #, c-format msgid "" "Written by %s, %s, %s,\n" "%s, %s, and %s.\n" msgstr "" "由 %s，%s，%s，\n" "%s，%s，和 %s 所写。\n" #. TRANSLATORS: Each %s denotes an author name. #. You can use line breaks, estimating that each author name occupies #. ca. 16 screen columns and that a screen line has ca. 80 columns. #: gnu/version-etc.c:141 #, c-format msgid "" "Written by %s, %s, %s,\n" "%s, %s, %s, and %s.\n" msgstr "" "由 %s，%s，%s，\n" "%s，%s，%s，和 %s 所写。\n" #. TRANSLATORS: Each %s denotes an author name. #. You can use line breaks, estimating that each author name occupies #. ca. 16 screen columns and that a screen line has ca. 80 columns. #: gnu/version-etc.c:149 #, c-format msgid "" "Written by %s, %s, %s,\n" "%s, %s, %s, %s,\n" "and %s.\n" msgstr "" "由 %s，%s，%s，\n" "%s，%s，%s，%s，\n" "和 %s 所写。\n" #. TRANSLATORS: Each %s denotes an author name. #. You can use line breaks, estimating that each author name occupies #. ca. 16 screen columns and that a screen line has ca. 80 columns. #: gnu/version-etc.c:158 #, c-format msgid "" "Written by %s, %s, %s,\n" "%s, %s, %s, %s,\n" "%s, and %s.\n" msgstr "" "由 %s，%s，%s，\n" "%s，%s，%s，%s，\n" "%s，和 %s 所写。\n" #. TRANSLATORS: Each %s denotes an author name. #. You can use line breaks, estimating that each author name occupies #. ca. 16 screen columns and that a screen line has ca. 80 columns. #: gnu/version-etc.c:169 #, c-format msgid "" "Written by %s, %s, %s,\n" "%s, %s, %s, %s,\n" "%s, %s, and others.\n" msgstr "" "由 %s，%s，%s，\n" "%s，%s，%s，%s，\n" "%s，%s，和其他人所写。\n" #. TRANSLATORS: The placeholder indicates the bug-reporting address #. for this package. Please add _another line_ saying #. "Report translation bugs to <...>\n" with the address for translation #. bugs (typically your translation team's web or email address). #: gnu/version-etc.c:247 #, c-format msgid "" "\n" "Report bugs to: %s\n" msgstr "" "\n" "将错误报告发送到: %s。翻译错误报告给 \n" #: gnu/version-etc.c:249 #, c-format msgid "Report %s bugs to: %s\n" msgstr "将 %s 错误报告发送到: %s\n" #: gnu/version-etc.c:253 #, c-format msgid "%s home page: <%s>\n" msgstr "%s 主页: <%s>\n" #: gnu/version-etc.c:255 #, c-format msgid "%s home page: \n" msgstr "%s 主页: \n" #: gnu/version-etc.c:258 msgid "General help using GNU software: \n" msgstr "GNU 软件的通用帮助: \n" #. TRANSLATORS: %s after `Cannot' is a function name, e.g. `Cannot open'. #. Directly translating this to another language will not work, first because #. %s itself is not translated. #. Translate it as `%s: Function %s failed'. #: lib/paxerror.c:58 lib/paxerror.c:71 #, c-format msgid "%s: Cannot %s" msgstr "%s：无法 %s" #. TRANSLATORS: %s after `Cannot' is a function name, e.g. `Cannot open'. #. Directly translating this to another language will not work, first because #. %s itself is not translated. #. Translate it as `%s: Function %s failed'. #: lib/paxerror.c:84 #, c-format msgid "%s: Warning: Cannot %s" msgstr "%s：警告：无法 %s" #: lib/paxerror.c:93 #, c-format msgid "%s: Cannot change mode to %s" msgstr "%s：无法将模式改为 %s" #: lib/paxerror.c:101 #, c-format msgid "%s: Cannot change ownership to uid %lu, gid %lu" msgstr "%s：无法将所有权改为 uid %lu，gid %lu" #: lib/paxerror.c:127 #, c-format msgid "%s: Cannot hard link to %s" msgstr "%s：无法硬连接到 %s" #: lib/paxerror.c:179 lib/paxerror.c:211 #, c-format msgid "%s: Read error at byte %s, while reading %lu byte" msgid_plural "%s: Read error at byte %s, while reading %lu bytes" msgstr[0] "%1$s：读入 %3$lu 字节时，在 %2$s 字节处发生读错误" #: lib/paxerror.c:192 #, c-format msgid "%s: Warning: Read error at byte %s, while reading %lu byte" msgid_plural "%s: Warning: Read error at byte %s, while reading %lu bytes" msgstr[0] "%1$s：警告：读入 %3$lu 字节时，在 %2$s 字节处发生读错误" #: lib/paxerror.c:259 #, c-format msgid "%s: Cannot seek to %s" msgstr "%s：无法定位到 %s" #: lib/paxerror.c:275 #, c-format msgid "%s: Warning: Cannot seek to %s" msgstr "%s：警告：无法定位到 %s" #: lib/paxerror.c:284 #, c-format msgid "%s: Cannot create symlink to %s" msgstr "%s：无法创建到 %s 的符号连接" #: lib/paxerror.c:349 #, c-format msgid "%s: Wrote only %lu of %lu byte" msgid_plural "%s: Wrote only %lu of %lu bytes" msgstr[0] "%1$s：只写入了 %3$lu 个中的 %2$lu 个字节" #: lib/paxnames.c:155 #, c-format msgid "Removing leading `%s' from member names" msgstr "从成员名中删除开头的“%s”" #: lib/paxnames.c:156 #, c-format msgid "Removing leading `%s' from hard link targets" msgstr "从硬连接目标中删除开头的“%s”" #: lib/paxnames.c:169 msgid "Substituting `.' for empty member name" msgstr "为空成员名替换“.”" #: lib/paxnames.c:170 msgid "Substituting `.' for empty hard link target" msgstr "为空的硬连接替换“.”" #: lib/rtapelib.c:299 #, c-format msgid "exec/tcp: Service not available" msgstr "exec/tcp：服务不可用" #: lib/rtapelib.c:303 #, c-format msgid "stdin" msgstr "标准输入" #: lib/rtapelib.c:306 #, c-format msgid "stdout" msgstr "标准输出" #: lib/rtapelib.c:429 #, c-format msgid "Cannot connect to %s: resolve failed" msgstr "无法连接至 %s: 解析失败" #: lib/rtapelib.c:515 #, c-format msgid "Cannot execute remote shell" msgstr "无法执行远程 shell" #: rmt/rmt.c:413 msgid "Seek direction out of range" msgstr "查寻方向超出范围" #: rmt/rmt.c:419 msgid "Invalid seek direction" msgstr "无效的查寻方向" #: rmt/rmt.c:427 msgid "Invalid seek offset" msgstr "无效的查寻偏移量" #: rmt/rmt.c:433 msgid "Seek offset out of range" msgstr "查寻操作的偏移量超出范围" #: rmt/rmt.c:474 rmt/rmt.c:525 rmt/rmt.c:589 msgid "Invalid byte count" msgstr "无效的字节数" #: rmt/rmt.c:480 rmt/rmt.c:531 rmt/rmt.c:595 rmt/rmt.c:606 msgid "Byte count out of range" msgstr "字节数超出范围" #: rmt/rmt.c:539 msgid "Premature eof" msgstr "文件结尾出现过早" #: rmt/rmt.c:582 msgid "Invalid operation code" msgstr "无效操作模式" #: rmt/rmt.c:617 rmt/rmt.c:661 msgid "Operation not supported" msgstr "不支持的操作" #: rmt/rmt.c:645 msgid "Unexpected arguments" msgstr "参数异常" #: rmt/rmt.c:670 msgid "Manipulate a tape drive, accepting commands from a remote process" msgstr "接受远程程序的命令操作磁带机" #: rmt/rmt.c:677 src/tar.c:423 src/tar.c:427 src/tar.c:557 src/tar.c:572 #: src/tar.c:703 src/tar.c:741 tests/genfile.c:167 msgid "NUMBER" msgstr "NUMBER" #: rmt/rmt.c:678 msgid "set debug level" msgstr "设定调试级别" #: rmt/rmt.c:679 src/tar.c:421 src/tar.c:562 src/tar.c:638 src/tar.c:642 #: src/tar.c:654 src/tar.c:664 src/tar.c:667 src/tar.c:669 src/tar.c:756 #: tests/genfile.c:133 tests/genfile.c:181 tests/genfile.c:185 #: tests/genfile.c:188 tests/genfile.c:194 msgid "FILE" msgstr "FILE" #: rmt/rmt.c:680 msgid "set debug output file name" msgstr "设定调试输出文件名" #: rmt/rmt.c:696 rmt/rmt.c:764 #, c-format msgid "cannot open %s" msgstr "无法打开 %s" #: rmt/rmt.c:761 tests/genfile.c:885 tests/genfile.c:902 #, c-format msgid "too many arguments" msgstr "参数过多" #: rmt/rmt.c:803 msgid "Garbage command" msgstr "垃圾命令" #: src/buffer.c:321 src/buffer.c:326 src/buffer.c:572 src/buffer.c:1176 #: src/buffer.c:1222 src/buffer.c:1251 src/delete.c:211 src/list.c:171 #: src/update.c:189 msgid "This does not look like a tar archive" msgstr "它似乎不像是一个 tar 归档文件" #: src/buffer.c:385 src/buffer.c:394 msgid "Total bytes written" msgstr "总计写入字节数" #: src/buffer.c:392 src/buffer.c:406 msgid "Total bytes read" msgstr "总计读取字节数" #: src/buffer.c:396 #, c-format msgid "Total bytes deleted: %s\n" msgstr "总计删除字节数：%s\n" #: src/buffer.c:485 msgid "(pipe)" msgstr "(管道)" #: src/buffer.c:508 msgid "Invalid value for record_size" msgstr "record_size 的无效值" #: src/buffer.c:511 msgid "No archive name given" msgstr "未给出归档文件名" #: src/buffer.c:555 msgid "Cannot verify stdin/stdout archive" msgstr "无法验证标准输入/标准输出归档文件" #: src/buffer.c:569 #, c-format msgid "Archive is compressed. Use %s option" msgstr "归档被压缩。使用 %s 选项" #: src/buffer.c:626 src/tar.c:2429 msgid "Cannot update compressed archives" msgstr "无法更新压缩归档文件" #: src/buffer.c:705 msgid "At beginning of tape, quitting now" msgstr "处于磁带的起点，现在退出" #: src/buffer.c:711 msgid "Too many errors, quitting" msgstr "错误过多，退出" #: src/buffer.c:744 #, c-format msgid "Record size = %lu block" msgid_plural "Record size = %lu blocks" msgstr[0] "记录大小 = %lu 块" #: src/buffer.c:765 #, c-format msgid "Unaligned block (%lu byte) in archive" msgid_plural "Unaligned block (%lu bytes) in archive" msgstr[0] "归档中未对齐的块 (%lu 字节)s" #: src/buffer.c:842 msgid "Cannot backspace archive file; it may be unreadable without -i" msgstr "无法倒回归档文件；如果没有 -i 可能无法读入它" #: src/buffer.c:874 msgid "rmtlseek not stopped at a record boundary" msgstr "rmtlseek 未停在记录边界处" #: src/buffer.c:928 #, c-format msgid "%s: contains invalid volume number" msgstr "%s：包含无效的卷编号" #: src/buffer.c:963 msgid "Volume number overflow" msgstr "卷编号溢出" #: src/buffer.c:978 #, c-format msgid "Prepare volume #%d for %s and hit return: " msgstr "为 %2$s 准备卷 #%1$d 并按回车：" #: src/buffer.c:984 msgid "EOF where user reply was expected" msgstr "需得到用户应答时文件结束" #: src/buffer.c:989 src/buffer.c:1021 msgid "WARNING: Archive is incomplete" msgstr "警告：归档文件不完整" #: src/buffer.c:1003 #, c-format msgid "" " n name Give a new file name for the next (and subsequent) volume(s)\n" " q Abort tar\n" " y or newline Continue operation\n" msgstr "" " n [name]\t给下一卷(及以后的卷)取一个新文件名\n" " q\t\t终止 tar\n" " y or newline\t继续操作\n" #: src/buffer.c:1008 #, c-format msgid " ! Spawn a subshell\n" msgstr " ! 衍生出一个子 shell\n" #: src/buffer.c:1009 #, c-format msgid " ? Print this list\n" msgstr " ? 打印此列表\n" #: src/buffer.c:1016 msgid "No new volume; exiting.\n" msgstr "没有新的卷；退出。\n" #: src/buffer.c:1049 msgid "File name not specified. Try again.\n" msgstr "未指定文件名。重试。\n" #: src/buffer.c:1062 #, c-format msgid "Invalid input. Type ? for help.\n" msgstr "无效输入。输入 ? 显示帮助。\n" #: src/buffer.c:1113 #, c-format msgid "%s command failed" msgstr "%s 命令失败" #: src/buffer.c:1294 #, c-format msgid "%s is possibly continued on this volume: header contains truncated name" msgstr "%s 在本卷可能连续: 头部包含截短的名字" #: src/buffer.c:1298 #, c-format msgid "%s is not continued on this volume" msgstr "%s 在本卷中不连续" #: src/buffer.c:1312 #, c-format msgid "%s is the wrong size (%s != %s + %s)" msgstr "%s 的大小错误 (%s != %s + %s)" #: src/buffer.c:1326 #, c-format msgid "This volume is out of sequence (%s - %s != %s)" msgstr "此卷次序有误（%s - %s != %s）" #: src/buffer.c:1404 src/buffer.c:1430 #, c-format msgid "Archive not labeled to match %s" msgstr "归档未被标记为匹配 %s" #: src/buffer.c:1434 #, c-format msgid "Volume %s does not match %s" msgstr "卷标 %s 不匹配 %s" #: src/buffer.c:1530 #, c-format msgid "%s: file name too long to be stored in a GNU multivolume header, truncated" msgstr "%s: 文件名太长而无法贮存在 GNU 多卷头，已被截短" #: src/buffer.c:1749 msgid "write did not end on a block boundary" msgstr "写操作未在记录边界处终止" #: src/compare.c:95 #, c-format msgid "Could only read %lu of %lu byte" msgid_plural "Could only read %lu of %lu bytes" msgstr[0] "仅能读入 %2$lu 中的 %1$lu 个字节" #: src/compare.c:105 src/compare.c:388 msgid "Contents differ" msgstr "内容不同" #: src/compare.c:131 src/extract.c:830 src/incremen.c:1462 src/list.c:386 #: src/list.c:1376 src/xheader.c:710 msgid "Unexpected EOF in archive" msgstr "归档文件中异常的 EOF" #: src/compare.c:179 src/compare.c:195 src/compare.c:313 src/compare.c:412 msgid "File type differs" msgstr "文件类型不同" #: src/compare.c:182 src/compare.c:202 src/compare.c:327 msgid "Mode differs" msgstr "访问模式不同" #: src/compare.c:205 msgid "Uid differs" msgstr "Uid 不同" #: src/compare.c:207 msgid "Gid differs" msgstr "Gid 不同" #: src/compare.c:211 msgid "Mod time differs" msgstr "修改时间不同" #: src/compare.c:215 src/compare.c:420 msgid "Size differs" msgstr "大小不同" #: src/compare.c:269 #, c-format msgid "Not linked to %s" msgstr "没有连接到 %s" #: src/compare.c:292 msgid "Symlink differs" msgstr "符号连接不同" #: src/compare.c:321 msgid "Device number differs" msgstr "设备号不同" #: src/compare.c:462 #, c-format msgid "Verify " msgstr "校验" #: src/compare.c:469 #, c-format msgid "%s: Unknown file type `%c', diffed as normal file" msgstr "%s：未知的文件类型“%c”，与普通文件不同" #: src/compare.c:524 msgid "Archive contains file names with leading prefixes removed." msgstr "归档包含带有被移除前导字符的文件名。" #: src/compare.c:526 msgid "Verification may fail to locate original files." msgstr "位于原始文件中的验证可能失败。" #: src/compare.c:599 #, c-format msgid "VERIFY FAILURE: %d invalid header detected" msgid_plural "VERIFY FAILURE: %d invalid headers detected" msgstr[0] "校验失败：检测到 %d 个无效的头" #: src/compare.c:617 src/list.c:148 #, c-format msgid "A lone zero block at %s" msgstr "在 %s 处一个单独的零块" #: src/create.c:68 #, c-format msgid "%s: contains a cache directory tag %s; %s" msgstr "%s: 包含一个缓存目录标识 %s；%s" #: src/create.c:273 #, c-format msgid "value %s out of %s range %s..%s; substituting %s" msgstr "值 %s 超出了 %s 的范围 %s..%s；正在替换 %s" #: src/create.c:279 #, c-format msgid "value %s out of %s range %s..%s" msgstr "值 %s 超出了 %s 的范围 %s..%s" #: src/create.c:339 msgid "Generating negative octal headers" msgstr "正在生成负八进制头" #: src/create.c:624 src/create.c:687 #, c-format msgid "%s: file name is too long (max %d); not dumped" msgstr "%s：文件名太长(最长 %d)；未输出" #: src/create.c:634 #, c-format msgid "%s: file name is too long (cannot be split); not dumped" msgstr "%s：文件名太长(不能被分割)；未输出" #: src/create.c:661 #, c-format msgid "%s: link name is too long; not dumped" msgstr "%s：连接名太长；未输出" #: src/create.c:1078 #, c-format msgid "%s: File shrank by %s byte; padding with zeros" msgid_plural "%s: File shrank by %s bytes; padding with zeros" msgstr[0] "%s：文件缩小 %s 字节；用零填充" #: src/create.c:1175 #, c-format msgid "%s: file is on a different filesystem; not dumped" msgstr "%s：文件在不同的文件系统上；未输出" #: src/create.c:1219 src/create.c:1230 src/incremen.c:590 src/incremen.c:596 msgid "contents not dumped" msgstr "未输出内容" #: src/create.c:1362 #, c-format msgid "%s: Unknown file type; file ignored" msgstr "%s：未知的文件类型；忽略文件" #: src/create.c:1472 #, c-format msgid "Missing links to %s." msgstr "缺少到 %s 的连接。" #: src/create.c:1543 #, c-format msgid "%s: file is unchanged; not dumped" msgstr "%s: 文件未改变；未输出" #: src/create.c:1552 #, c-format msgid "%s: file is the archive; not dumped" msgstr "%s: 文件是归档文件；未输出" #: src/create.c:1593 src/incremen.c:583 msgid "directory not dumped" msgstr "未输出目录" #: src/create.c:1664 #, c-format msgid "%s: file changed as we read it" msgstr "%s: 在我们读入文件时文件发生了变化" #: src/create.c:1731 #, c-format msgid "%s: socket ignored" msgstr "%s: 忽略套接字(socket)" #: src/create.c:1737 #, c-format msgid "%s: door ignored" msgstr "%s: 忽略权限" #: src/delete.c:217 src/list.c:185 src/update.c:194 msgid "Skipping to next header" msgstr "跳转到下一个头" #: src/delete.c:283 msgid "Deleting non-header from archive" msgstr "从归档文件中删除非头信息" #: src/extract.c:211 #, c-format msgid "%s: implausibly old time stamp %s" msgstr "%s：不可信的旧时间戳 %s" #: src/extract.c:229 #, c-format msgid "%s: time stamp %s is %s s in the future" msgstr "%s：时间戳 %s 是未来的 %s 秒之后" #: src/extract.c:409 #, c-format msgid "%s: Unexpected inconsistency when making directory" msgstr "%s：创建目录时出现意外的不一致" #: src/extract.c:613 #, c-format msgid "%s: Directory renamed before its status could be extracted" msgstr "%s：目录名在状态信息被获取之前改变了" #: src/extract.c:759 msgid "Extracting contiguous files as regular files" msgstr "展开紧邻的文件为普通文件" #: src/extract.c:1039 msgid "Attempting extraction of symbolic links as hard links" msgstr "正试图将符号连接展开为硬连接" #: src/extract.c:1183 #, c-format msgid "%s: Cannot extract -- file is continued from another volume" msgstr "%s：无法展开 -- 文件一直延伸至另一卷中" #: src/extract.c:1190 src/list.c:1109 msgid "Unexpected long name header" msgstr "异常的长名字头部" #: src/extract.c:1197 #, c-format msgid "%s: Unknown file type `%c', extracted as normal file" msgstr "%s：未知的文件类型“%c”，作为普通文件展开" #: src/extract.c:1223 #, c-format msgid "Current %s is newer or same age" msgstr "当前的“%s”更新或一样新" #: src/extract.c:1274 #, c-format msgid "%s: Was unable to backup this file" msgstr "%s：无法备份该文件" #: src/extract.c:1402 #, c-format msgid "Cannot rename %s to %s" msgstr "无法将 %s 重命名为 %s" #: src/incremen.c:482 src/incremen.c:526 #, c-format msgid "%s: Directory has been renamed from %s" msgstr "%s：目录已改名，不再是 %s" #: src/incremen.c:494 #, c-format msgid "%s: Directory has been renamed" msgstr "%s：目录已被改名" #: src/incremen.c:539 #, c-format msgid "%s: Directory is new" msgstr "%s：目录是新的" #: src/incremen.c:956 src/incremen.c:973 msgid "Invalid time stamp" msgstr "无效的时间戳" #: src/incremen.c:1012 msgid "Invalid modification time (seconds)" msgstr "无效的修改时间(秒)" #: src/incremen.c:1027 msgid "Invalid modification time (nanoseconds)" msgstr "无效的修改时间(纳秒)" #: src/incremen.c:1047 msgid "Invalid device number" msgstr "无效的设备号" #: src/incremen.c:1062 msgid "Invalid inode number" msgstr "无效的 inode 号" #: src/incremen.c:1113 src/incremen.c:1150 msgid "Field too long while reading snapshot file" msgstr "读取目录文件时字段太长" #: src/incremen.c:1120 src/incremen.c:1158 msgid "Read error in snapshot file" msgstr "目录文件读取错误" #: src/incremen.c:1122 src/incremen.c:1162 src/incremen.c:1214 #: src/incremen.c:1272 msgid "Unexpected EOF in snapshot file" msgstr "目录文件中异常的文件结尾(EOF)" #: src/incremen.c:1129 src/incremen.c:1169 msgid "Unexpected field value in snapshot file" msgstr "目录文件中异常的字段值" #: src/incremen.c:1264 msgid "Missing record terminator" msgstr "缺少记录终止符" #: src/incremen.c:1325 src/incremen.c:1328 msgid "Bad incremental file format" msgstr "文件格式错误增量" #: src/incremen.c:1347 #, c-format msgid "Unsupported incremental format version: %" msgstr "不支持增量格式版本: %" #: src/incremen.c:1502 #, c-format msgid "Malformed dumpdir: expected '%c' but found %#3o" msgstr "错误的 dumpdir: 需要“%c”但实际为 %#3o" #: src/incremen.c:1512 msgid "Malformed dumpdir: 'X' duplicated" msgstr "错误的 dumpdir: 重复的“X”" #: src/incremen.c:1525 msgid "Malformed dumpdir: empty name in 'R'" msgstr "错误的 dumpdir: “R”中有空名字" #: src/incremen.c:1538 msgid "Malformed dumpdir: 'T' not preceeded by 'R'" msgstr "错误的 dumpdir: “R”后未紧接着用“T”" #: src/incremen.c:1544 msgid "Malformed dumpdir: empty name in 'T'" msgstr "错误的 dumpdir: “T”中有空名字" #: src/incremen.c:1564 #, c-format msgid "Malformed dumpdir: expected '%c' but found end of data" msgstr "错误的 dumpdir: 需要“%c”但实际为数据结尾" #: src/incremen.c:1571 msgid "Malformed dumpdir: 'X' never used" msgstr "错误的 dumpdir: 从未用过“X”" #: src/incremen.c:1615 #, c-format msgid "Cannot create temporary directory using template %s" msgstr "无法通过模板 %s 创建临时目录" #: src/incremen.c:1677 #, c-format msgid "%s: Not purging directory: unable to stat" msgstr "%s：未清除目录：无法 stat" #: src/incremen.c:1690 #, c-format msgid "%s: directory is on a different device: not purging" msgstr "%s: 目录在不同的设备上: 未清除" #: src/incremen.c:1698 #, c-format msgid "%s: Deleting %s\n" msgstr "%s：正在删除 %s\n" #: src/incremen.c:1703 #, c-format msgid "%s: Cannot remove" msgstr "%s：无法删除" #: src/list.c:115 #, c-format msgid "%s: Omitting" msgstr "%s：忽略" #: src/list.c:133 #, c-format msgid "block %s: ** Block of NULs **\n" msgstr "块 %s：** 空块 **\n" #: src/list.c:159 #, c-format msgid "block %s: ** End of File **\n" msgstr "块 %s：** 文件结束 **\n" #: src/list.c:182 src/list.c:1081 src/list.c:1344 #, c-format msgid "block %s: " msgstr "块 %s：" #. TRANSLATORS: %s is type of the value (gid_t, uid_t, #. etc.) #: src/list.c:689 #, c-format msgid "Blanks in header where numeric %s value expected" msgstr "头中需要数值 %s 处为空白符" #. TRANSLATORS: Second %s is a type name (gid_t,uid_t,etc.) #: src/list.c:744 #, c-format msgid "Archive octal value %.*s is out of %s range; assuming two's complement" msgstr "归档的八进制值 %.*s 超出范围 %s；假定为其二进制补码" #. TRANSLATORS: Second %s is a type name (gid_t,uid_t,etc.) #: src/list.c:755 #, c-format msgid "Archive octal value %.*s is out of %s range" msgstr "归档八进制值 %.*s 超出 %s 的范围" #: src/list.c:776 msgid "Archive contains obsolescent base-64 headers" msgstr "归档包含过时的 base-64 头" #: src/list.c:790 #, c-format msgid "Archive signed base-64 string %s is out of %s range" msgstr "归档签署的 base-64 字符串 %s 超出范围 %s" #: src/list.c:821 #, c-format msgid "Archive base-256 value is out of %s range" msgstr "归档的 base-256 值超出范围 %s" #. TRANSLATORS: Second %s is a type name (gid_t,uid_t,etc.) #: src/list.c:850 #, c-format msgid "Archive contains %.*s where numeric %s value expected" msgstr "归档包含 %.*s 而需要数字值 %s" #. TRANSLATORS: Second %s is type name (gid_t,uid_t,etc.) #: src/list.c:872 #, c-format msgid "Archive value %s is out of %s range %s..%s" msgstr "归档值 %s 超出 %s 的范围 %s..%s" #: src/list.c:1245 #, c-format msgid " link to %s\n" msgstr " 连接到 %s\n" #: src/list.c:1253 #, c-format msgid " unknown file type %s\n" msgstr " 未知的文件类型 %s\n" #: src/list.c:1271 #, c-format msgid "--Long Link--\n" msgstr "--长连接--\n" #: src/list.c:1275 #, c-format msgid "--Long Name--\n" msgstr "--长名--\n" #: src/list.c:1279 #, c-format msgid "--Volume Header--\n" msgstr "--卷头--\n" #: src/list.c:1287 #, c-format msgid "--Continued at byte %s--\n" msgstr "--从 %s 字节继续--\n" #: src/list.c:1349 msgid "Creating directory:" msgstr "正在创建目录：" #: src/misc.c:502 #, c-format msgid "Renaming %s to %s\n" msgstr "将 %s 改名为 %s\n" #: src/misc.c:511 src/misc.c:529 #, c-format msgid "%s: Cannot rename to %s" msgstr "%s：无法重命名为 %s" #: src/misc.c:534 #, c-format msgid "Renaming %s back to %s\n" msgstr "将 %s 的名字改回 %s\n" #: src/misc.c:669 msgid "Cannot save working directory" msgstr "无法保存工作目录" #: src/misc.c:675 msgid "Cannot change working directory" msgstr "无法改变工作目录" #: src/misc.c:759 #, c-format msgid "%s: File removed before we read it" msgstr "%s：文件在我们读入之前被删除了" #: src/misc.c:774 #, c-format msgid "%s: Directory removed before we read it" msgstr "%s: 文件在读入之前被删除了" #: src/misc.c:795 msgid "child process" msgstr "子进程" #: src/misc.c:804 msgid "interprocess channel" msgstr "进程内通道" #: src/names.c:601 msgid "Pattern matching characters used in file names" msgstr "文件名中所使用的字符匹配模式" #: src/names.c:603 msgid "Use --wildcards to enable pattern matching, or --no-wildcards to suppress this warning" msgstr "使用 --wildcards 打开模式匹配，或是 --no-wildcards 来关闭之" #: src/names.c:619 src/names.c:637 #, c-format msgid "%s: Not found in archive" msgstr "%s：归档中找不到" #: src/names.c:622 #, c-format msgid "%s: Required occurrence not found in archive" msgstr "%s：没有在归档中找到需要的" #: src/names.c:894 msgid "Using -C option inside file list is not allowed with --listed-incremental" msgstr "在文件列表中 -C 选项与 --listed-incremental 选项不许合用" #: src/names.c:900 msgid "Only one -C option is allowed with --listed-incremental" msgstr "仅一个 -C 选项允许与 --listed-incremental 合用" #: src/tar.c:81 #, c-format msgid "Options `-%s' and `-%s' both want standard input" msgstr "选项“-%s”和“-%s”都需要标准输出" #: src/tar.c:158 #, c-format msgid "%s: Invalid archive format" msgstr "%s：无效的归档格式" #: src/tar.c:182 msgid "GNU features wanted on incompatible archive format" msgstr "在不兼容的归档格式上需要 GNU 特征" #: src/tar.c:250 #, c-format msgid "Unknown quoting style `%s'. Try `%s --quoting-style=help' to get a list." msgstr "未知的引用形式‘%s’。尝试用‘%s --quoting-style=help’获取列表。" #: src/tar.c:347 msgid "" "GNU `tar' saves many files together into a single tape or disk archive, and can restore individual files from the archive.\n" "\n" "Examples:\n" " tar -cf archive.tar foo bar # Create archive.tar from files foo and bar.\n" " tar -tvf archive.tar # List all files in archive.tar verbosely.\n" " tar -xf archive.tar # Extract all files from archive.tar.\n" msgstr "" " GNU ‘tar’ 将许多文件一起保存至一个单独的磁带或磁盘归档，并能从归档中单独还原所需文件。\n" "\n" "示例\n" " tar -cf archive.tar foo bar # 从文件 foo 和 bar 创建归档文件 archive.tar。\n" " tar -tvf archive.tar # 详细列举归档文件 archive.tar 中的所有文件。\n" " tar -xf archive.tar # 展开归档文件 archive.tar 中的所有文件。\n" #: src/tar.c:356 msgid "" "The backup suffix is `~', unless set with --suffix or SIMPLE_BACKUP_SUFFIX.\n" "The version control may be set with --backup or VERSION_CONTROL, values are:\n" "\n" " none, off never make backups\n" " t, numbered make numbered backups\n" " nil, existing numbered if numbered backups exist, simple otherwise\n" " never, simple always make simple backups\n" msgstr "" "除非以 --suffix 或 SIMPLE_BACKUP_SUFFIX 设置备份后缀，否则备份后缀就是“~”。\n" "可以用 --backup 或 VERSION_CONTROL 设置版本控制，可能的值为：\n" "\n" " none, off\t 从不做备份\n" " t, numbered 进行编号备份\n" " nil, existing 如果编号备份存在则进行编号备份，否则进行简单备份\n" " never, simple 总是使用简单备份\n" #: src/tar.c:386 msgid "Main operation mode:" msgstr "主操作模式:" #: src/tar.c:389 msgid "list the contents of an archive" msgstr "列出归档内容" #: src/tar.c:391 msgid "extract files from an archive" msgstr "从归档中解出文件" #: src/tar.c:394 msgid "create a new archive" msgstr "创建一个新归档" #: src/tar.c:396 msgid "find differences between archive and file system" msgstr "找出归档和文件系统的差异" #: src/tar.c:399 msgid "append files to the end of an archive" msgstr "追加文件至归档结尾" #: src/tar.c:401 msgid "only append files newer than copy in archive" msgstr "仅追加比归档中副本更新的文件" #: src/tar.c:403 msgid "append tar files to an archive" msgstr "追加 tar 文件至归档" #: src/tar.c:406 msgid "delete from the archive (not on mag tapes!)" msgstr "从归档(非磁带！)中删除" #: src/tar.c:408 msgid "test the archive volume label and exit" msgstr "测试归档卷标并退出" #: src/tar.c:413 msgid "Operation modifiers:" msgstr "操作修饰符:" #: src/tar.c:416 msgid "handle sparse files efficiently" msgstr "高效处理离散文件" #: src/tar.c:417 msgid "MAJOR[.MINOR]" msgstr "MAJOR[.MINOR]" #: src/tar.c:418 msgid "set version of the sparse format to use (implies --sparse)" msgstr "设置所用的离散格式版本(隐含 --sparse)" #: src/tar.c:420 msgid "handle old GNU-format incremental backup" msgstr "处理老式的 GNU 格式的增量备份" #: src/tar.c:422 msgid "handle new GNU-format incremental backup" msgstr "处理新式的 GNU 格式的增量备份" #: src/tar.c:424 msgid "dump level for created listed-incremental archive" msgstr "所创建的增量列表归档的输出级别" #: src/tar.c:426 msgid "do not exit with nonzero on unreadable files" msgstr "当遇上不可读文件时不要以非零值退出" #: src/tar.c:428 msgid "process only the NUMBERth occurrence of each file in the archive; this option is valid only in conjunction with one of the subcommands --delete, --diff, --extract or --list and when a list of files is given either on the command line or via the -T option; NUMBER defaults to 1" msgstr "仅处理归档中每个文件的第 NUMBER 个事件；仅当与以下子命令 --delete, --diff, --extract 或是 --list 中的一个联合使用时，此选项才有效。而且不管文件列表是以命令行形式给出或是通过 -T 选项指定的；NUMBER 值默认为 1" #: src/tar.c:434 msgid "archive is seekable" msgstr "归档可检索" #: src/tar.c:436 msgid "archive is not seekable" msgstr "归档不可检索" #: src/tar.c:438 msgid "do not check device numbers when creating incremental archives" msgstr "当创建增量归档时不要检查设备号" #: src/tar.c:441 msgid "check device numbers when creating incremental archives (default)" msgstr "当创建增量归档时检查设备号(默认)" #: src/tar.c:447 msgid "Overwrite control:" msgstr "重写控制:" #: src/tar.c:450 msgid "attempt to verify the archive after writing it" msgstr "在写入以后尝试校验归档" #: src/tar.c:452 msgid "remove files after adding them to the archive" msgstr "在添加文件至归档后删除它们" #: src/tar.c:454 msgid "don't replace existing files when extracting" msgstr "解压时不要替换存在的文件" #: src/tar.c:456 msgid "don't replace existing files that are newer than their archive copies" msgstr "不要替换比归档中副本更新的已存在的文件" #: src/tar.c:458 msgid "overwrite existing files when extracting" msgstr "解压时重写存在的文件" #: src/tar.c:460 msgid "remove each file prior to extracting over it" msgstr "在解压要重写的文件之前先删除它们" #: src/tar.c:462 msgid "empty hierarchies prior to extracting directory" msgstr "解压目录之前先清除目录层次" #: src/tar.c:464 msgid "preserve metadata of existing directories" msgstr "保留已存在目录的元数据" #: src/tar.c:466 msgid "overwrite metadata of existing directories when extracting (default)" msgstr "解压时重写已存在目录的元数据(默认)" #: src/tar.c:472 msgid "Select output stream:" msgstr "选择输出流:" #: src/tar.c:475 msgid "extract files to standard output" msgstr "解压文件至标准输出" #: src/tar.c:476 src/tar.c:535 src/tar.c:537 tests/genfile.c:191 msgid "COMMAND" msgstr "COMMAND" #: src/tar.c:477 msgid "pipe extracted files to another program" msgstr "将解压的文件通过管道传送至另一个程序" #: src/tar.c:479 msgid "ignore exit codes of children" msgstr "忽略子进程的退出代码" #: src/tar.c:481 msgid "treat non-zero exit codes of children as error" msgstr "将子进程的非零退出代码认为发生错误" #: src/tar.c:486 msgid "Handling of file attributes:" msgstr "操作文件属性:" #: src/tar.c:489 msgid "force NAME as owner for added files" msgstr "强制将 NAME 作为所添加的文件的所有者" #: src/tar.c:491 msgid "force NAME as group for added files" msgstr "强制将 NAME 作为所添加的文件的组所有者" #: src/tar.c:492 src/tar.c:689 msgid "DATE-OR-FILE" msgstr "DATE-OR-FILE" #: src/tar.c:493 msgid "set mtime for added files from DATE-OR-FILE" msgstr "从 DATE-OR-FILE 中为添加的文件设置 mtime" #: src/tar.c:494 msgid "CHANGES" msgstr "CHANGES" #: src/tar.c:495 msgid "force (symbolic) mode CHANGES for added files" msgstr "强制将所添加的文件(符号)更改为权限 CHANGES" #: src/tar.c:497 msgid "METHOD" msgstr "METHOD" #: src/tar.c:498 msgid "preserve access times on dumped files, either by restoring the times after reading (METHOD='replace'; default) or by not setting the times in the first place (METHOD='system')" msgstr "在输出的文件上保留访问时间，要么通过在读取(默认 METHOD=‘replace’)后还原时间，要不就不要在第一次(METHOD=‘system’)设置时间" #: src/tar.c:502 msgid "don't extract file modified time" msgstr "不要解压文件的修改时间" #: src/tar.c:504 msgid "try extracting files with the same ownership as exists in the archive (default for superuser)" msgstr "尝试解压时保持所有者关系一致(超级用户默认此项)" #: src/tar.c:506 msgid "extract files as yourself (default for ordinary users)" msgstr "将文件解压为您所有(普通用户默认此项)" #: src/tar.c:508 msgid "always use numbers for user/group names" msgstr "总是以数字代表用户/组的名称" #: src/tar.c:510 msgid "extract information about file permissions (default for superuser)" msgstr "解压文件权限信息(默认只为超级用户服务)" #: src/tar.c:514 msgid "apply the user's umask when extracting permissions from the archive (default for ordinary users)" msgstr "从归档中解压权限时使用用户的掩码位(默认为普通用户服务)" #: src/tar.c:516 msgid "sort names to extract to match archive" msgstr "为解压至匹配归档排序名称" #: src/tar.c:519 msgid "same as both -p and -s" msgstr "与 -p 和 -s 一样" #: src/tar.c:521 msgid "delay setting modification times and permissions of extracted directories until the end of extraction" msgstr "直到解压结束才设置修改时间和所解目录的权限" #: src/tar.c:524 msgid "cancel the effect of --delay-directory-restore option" msgstr "取消 --delay-directory-restore 选项的效果" #: src/tar.c:529 msgid "Device selection and switching:" msgstr "设备选择和切换:" #: src/tar.c:531 msgid "ARCHIVE" msgstr "ARCHIVE" #: src/tar.c:532 msgid "use archive file or device ARCHIVE" msgstr "使用归档文件或 ARCHIVE 设备" #: src/tar.c:534 msgid "archive file is local even if it has a colon" msgstr "即使归档文件存在副本还是把它认为是本地归档" #: src/tar.c:536 msgid "use given rmt COMMAND instead of rmt" msgstr "使用指定的 rmt COMMAND 代替 rmt" #: src/tar.c:538 msgid "use remote COMMAND instead of rsh" msgstr "使用远程 COMMAND 代替 rsh" #: src/tar.c:542 msgid "specify drive and density" msgstr "指定驱动器和压缩率" #: src/tar.c:556 msgid "create/list/extract multi-volume archive" msgstr "创建/列出/解压多卷归档文件" #: src/tar.c:558 msgid "change tape after writing NUMBER x 1024 bytes" msgstr "写入 NUMBER × 1024 字节后更换磁带" #: src/tar.c:560 msgid "run script at end of each tape (implies -M)" msgstr "在每卷磁带最后运行脚本(隐含 -M)" #: src/tar.c:563 msgid "use/update the volume number in FILE" msgstr "使用/更新 FILE 中的卷数" #: src/tar.c:568 msgid "Device blocking:" msgstr "设备分块:" #: src/tar.c:570 msgid "BLOCKS" msgstr "BLOCKS" #: src/tar.c:571 msgid "BLOCKS x 512 bytes per record" msgstr "每个记录 BLOCKS x 512 字节" #: src/tar.c:573 msgid "NUMBER of bytes per record, multiple of 512" msgstr "每个记录的字节数 NUMBER，乘以 512" #: src/tar.c:575 msgid "ignore zeroed blocks in archive (means EOF)" msgstr "忽略归档中的零字节块(即文件结尾)" #: src/tar.c:577 msgid "reblock as we read (for 4.2BSD pipes)" msgstr "读取时重新分块(只对 4.2BSD 管道有效)" #: src/tar.c:582 msgid "Archive format selection:" msgstr "选择归档格式:" #: src/tar.c:584 tests/genfile.c:154 msgid "FORMAT" msgstr "FORMAT" #: src/tar.c:585 msgid "create archive of the given format" msgstr "创建指定格式的归档" #: src/tar.c:587 msgid "FORMAT is one of the following:" msgstr "FORMAT 是以下格式中的一种:" #: src/tar.c:588 msgid "old V7 tar format" msgstr "old V7 tar 格式" #: src/tar.c:591 msgid "GNU format as per tar <= 1.12" msgstr "GNU 格式 as per tar <= 1.12" #: src/tar.c:593 msgid "GNU tar 1.13.x format" msgstr "GNU tar 1.13.x 格式" #: src/tar.c:595 msgid "POSIX 1003.1-1988 (ustar) format" msgstr "POSIX 1003.1-1988 (ustar) 格式" #: src/tar.c:597 msgid "POSIX 1003.1-2001 (pax) format" msgstr "POSIX 1003.1-2001 (pax) 格式" #: src/tar.c:598 msgid "same as pax" msgstr "等同于 pax" #: src/tar.c:601 msgid "same as --format=v7" msgstr "等同于 --format=v7" #: src/tar.c:604 msgid "same as --format=posix" msgstr "等同于 --format=posix" #: src/tar.c:605 msgid "keyword[[:]=value][,keyword[[:]=value]]..." msgstr "关键字[[:]=值][,关键字[[:]=值]]..." #: src/tar.c:606 msgid "control pax keywords" msgstr "控制 pax 关键字" #: src/tar.c:607 msgid "TEXT" msgstr "TEXT" #: src/tar.c:608 msgid "create archive with volume name TEXT; at list/extract time, use TEXT as a globbing pattern for volume name" msgstr "创建带有卷名 TEXT 的归档；在列出/解压时，使用 TEXT 作为卷名的模式串" #: src/tar.c:613 msgid "Compression options:" msgstr "压缩选项:" #: src/tar.c:615 msgid "use archive suffix to determine the compression program" msgstr "使用归档后缀名来决定压缩程序" #: src/tar.c:617 msgid "do not use archive suffix to determine the compression program" msgstr "不使用归档后缀名来决定压缩程序" #: src/tar.c:619 msgid "PROG" msgstr "PROG" #: src/tar.c:620 msgid "filter through PROG (must accept -d)" msgstr "通过 PROG 过滤(必须是能接受 -d 选项的程序)" #: src/tar.c:636 msgid "Local file selection:" msgstr "本地文件选择:" #: src/tar.c:639 msgid "add given FILE to the archive (useful if its name starts with a dash)" msgstr "添加指定的 FILE 至归档(如果名字以 - 开始会很有用的)" #: src/tar.c:640 msgid "DIR" msgstr "DIR" #: src/tar.c:641 msgid "change to directory DIR" msgstr "改变至目录 DIR" #: src/tar.c:643 msgid "get names to extract or create from FILE" msgstr "从 FILE 中获取文件名来解压或创建文件" #: src/tar.c:645 msgid "-T reads null-terminated names, disable -C" msgstr "-T 读取以空终止的名字，-C 禁用" #: src/tar.c:647 msgid "disable the effect of the previous --null option" msgstr "禁用上一次的效果 --null 选项" #: src/tar.c:649 msgid "unquote filenames read with -T (default)" msgstr "以 -T 读取的文件名作为引用结束(默认)" #: src/tar.c:651 msgid "do not unquote filenames read with -T" msgstr "不以 -T 读取的文件名作为引用结束" #: src/tar.c:652 tests/genfile.c:137 msgid "PATTERN" msgstr "PATTERN" #: src/tar.c:653 msgid "exclude files, given as a PATTERN" msgstr "排除以 PATTERN 指定的文件" #: src/tar.c:655 msgid "exclude patterns listed in FILE" msgstr "排除 FILE 中列出的模式串" #: src/tar.c:657 msgid "exclude contents of directories containing CACHEDIR.TAG, except for the tag file itself" msgstr "除标识文件本身外，排除包含 CACHEDIR.TAG 的目录中的内容" #: src/tar.c:660 msgid "exclude everything under directories containing CACHEDIR.TAG" msgstr "排除包含 CACHEDIR.TAG 的目录中所有内容" #: src/tar.c:663 msgid "exclude directories containing CACHEDIR.TAG" msgstr "排除包含 CACHEDIR.TAG 的目录" #: src/tar.c:665 msgid "exclude contents of directories containing FILE, except for FILE itself" msgstr "除 FILE 自身外，排除包含 FILE 的目录中的内容" #: src/tar.c:668 msgid "exclude everything under directories containing FILE" msgstr "排除包含 FILE 的目录中的所有内容" #: src/tar.c:670 msgid "exclude directories containing FILE" msgstr "排除包含 FILE 的目录" #: src/tar.c:672 msgid "exclude version control system directories" msgstr "排除版本控制系统目录" #: src/tar.c:674 msgid "exclude backup and lock files" msgstr "排除备份和锁文件" #: src/tar.c:676 msgid "avoid descending automatically in directories" msgstr "避免目录中的自动降级" #: src/tar.c:678 msgid "stay in local file system when creating archive" msgstr "创建归档时保存在本地文件系统中" #: src/tar.c:680 msgid "recurse into directories (default)" msgstr "目录递归(默认)" #: src/tar.c:682 msgid "don't strip leading `/'s from file names" msgstr "不要从文件名中清除引导符‘/’" #: src/tar.c:684 msgid "follow symlinks; archive and dump the files they point to" msgstr "跟踪符号链接；将它们所指向的文件归档并输出" #: src/tar.c:686 msgid "follow hard links; archive and dump the files they refer to" msgstr "跟踪硬链接；将它们所指向的文件归档并输出" #: src/tar.c:687 msgid "MEMBER-NAME" msgstr "MEMBER-NAME" #: src/tar.c:688 msgid "begin at member MEMBER-NAME in the archive" msgstr "从归档中的 MEMBER-NAME 成员处开始" #: src/tar.c:690 msgid "only store files newer than DATE-OR-FILE" msgstr "只保存比 DATE-OR-FILE 更新的文件" #: src/tar.c:692 msgid "DATE" msgstr "DATE" #: src/tar.c:693 msgid "compare date and time when data changed only" msgstr "当只有数据改变时比较数据和时间" #: src/tar.c:694 msgid "CONTROL" msgstr "CONTROL" #: src/tar.c:695 msgid "backup before removal, choose version CONTROL" msgstr "在删除前备份，选择 CONTROL 版本" #: src/tar.c:696 src/tar.c:773 src/tar.c:775 tests/genfile.c:170 msgid "STRING" msgstr "STRING" #: src/tar.c:697 msgid "backup before removal, override usual suffix ('~' unless overridden by environment variable SIMPLE_BACKUP_SUFFIX)" msgstr "在删除前备份，除非被环境变量 SIMPLE_BACKUP_SUFFIX 覆盖，否则覆盖常用后缀(‘’)" #: src/tar.c:702 msgid "File name transformations:" msgstr "文件名变换:" #: src/tar.c:704 msgid "strip NUMBER leading components from file names on extraction" msgstr "解压时从文件名中清除 NUMBER 个引导部分" #: src/tar.c:706 msgid "EXPRESSION" msgstr "EXPRESSION" #: src/tar.c:707 msgid "use sed replace EXPRESSION to transform file names" msgstr "使用 sed 代替 EXPRESSION 来进行文件名变换" #: src/tar.c:713 msgid "File name matching options (affect both exclude and include patterns):" msgstr "文件名匹配选项(同时影响排除和包括模式串):" #: src/tar.c:716 msgid "ignore case" msgstr "忽略大小写" #: src/tar.c:718 msgid "patterns match file name start" msgstr "模式串匹配文件名头部" #: src/tar.c:720 msgid "patterns match after any `/' (default for exclusion)" msgstr "模式串匹配任意‘/’后字符(默认对 exclusion 有效)" #: src/tar.c:722 msgid "case sensitive matching (default)" msgstr "匹配大小写(默认)" #: src/tar.c:724 msgid "use wildcards (default for exclusion)" msgstr "使用通配符(默认对 exclusion )" #: src/tar.c:726 msgid "verbatim string matching" msgstr "逐字匹配字符串" #: src/tar.c:728 msgid "wildcards do not match `/'" msgstr "通配符不匹配‘/’" #: src/tar.c:730 msgid "wildcards match `/' (default for exclusion)" msgstr "通配符匹配‘/’(默认对排除操作有效)" #: src/tar.c:735 msgid "Informative output:" msgstr "提示性输出:" #: src/tar.c:738 msgid "verbosely list files processed" msgstr "详细地列出处理的文件" #: src/tar.c:739 msgid "KEYWORD" msgstr "KEYWORD" #: src/tar.c:740 msgid "warning control" msgstr "警告控制:" #: src/tar.c:742 msgid "display progress messages every NUMBERth record (default 10)" msgstr "每隔 NUMBER 个记录显示进度信息(默认为 10 个)" #: src/tar.c:744 msgid "ACTION" msgstr "ACTION" #: src/tar.c:745 msgid "execute ACTION on each checkpoint" msgstr "在每个检查点上执行 ACTION" #: src/tar.c:748 msgid "print a message if not all links are dumped" msgstr "只要不是所有链接都被输出就打印信息" #: src/tar.c:749 msgid "SIGNAL" msgstr "SIGNAL" #: src/tar.c:750 msgid "print total bytes after processing the archive; with an argument - print total bytes when this SIGNAL is delivered; Allowed signals are: SIGHUP, SIGQUIT, SIGINT, SIGUSR1 and SIGUSR2; the names without SIG prefix are also accepted" msgstr "处理归档后打印出总字节数；当此 SIGNAL 被触发时带参数 - 打印总字节数；允许的信号为: SIGHUP，SIGQUIT，SIGINT，SIGUSR1 和 SIGUSR2；同时也接受不带 SIG 前缀的信号名称" #: src/tar.c:755 msgid "print file modification dates in UTC" msgstr "以 UTC 格式打印文件修改信息" #: src/tar.c:757 msgid "send verbose output to FILE" msgstr "将详细输出发送至 FILE" #: src/tar.c:759 msgid "show block number within archive with each message" msgstr "每个信息都显示归档内的块数" #: src/tar.c:761 msgid "ask for confirmation for every action" msgstr "每次操作都要求确认" #: src/tar.c:764 msgid "show tar defaults" msgstr "显示 tar 默认选项" #: src/tar.c:766 msgid "when listing or extracting, list each directory that does not match search criteria" msgstr "列表或解压时，列出每个不匹配查找标准的目录" #: src/tar.c:768 msgid "show file or archive names after transformation" msgstr "显示变换后的文件名或归档名" #: src/tar.c:771 msgid "STYLE" msgstr "STYLE" #: src/tar.c:772 msgid "set name quoting style; see below for valid STYLE values" msgstr "设置名称引用风格；有效的 STYLE 值请参阅以下说明" #: src/tar.c:774 msgid "additionally quote characters from STRING" msgstr "来自 STRING 的额外的引用字符" #: src/tar.c:776 msgid "disable quoting for characters from STRING" msgstr "禁用来自 STRING 的字符引用" #: src/tar.c:781 msgid "Compatibility options:" msgstr "兼容性选项:" #: src/tar.c:784 msgid "when creating, same as --old-archive; when extracting, same as --no-same-owner" msgstr "创建归档时，相当于 --old-archive；展开归档时，相当于 --no-same-owner" #: src/tar.c:789 msgid "Other options:" msgstr "其它选项:" #: src/tar.c:792 msgid "disable use of some potentially harmful options" msgstr "禁用某些潜在的有危险的选项" #: src/tar.c:927 msgid "You may not specify more than one `-Acdtrux' or `--test-label' option" msgstr "您不能指定超过一个\"-Acdtrux\"或是\"--test-label\"外的选项" #: src/tar.c:937 msgid "Conflicting compression options" msgstr "压缩选项冲突" #: src/tar.c:993 #, c-format msgid "Unknown signal name: %s" msgstr "未知的信号名称: %s" #: src/tar.c:1017 msgid "Date sample file not found" msgstr "找不到数据样板文件" #: src/tar.c:1025 #, c-format msgid "Substituting %s for unknown date format %s" msgstr "把未知的时间格式 %2$s 替换为 %1$s" #: src/tar.c:1054 #, c-format msgid "Option %s: Treating date `%s' as %s" msgstr "选项 %s: 将日期 ‘%s’ 当作 %s" #: src/tar.c:1132 #, c-format msgid "%s: file list already read" msgstr "%s: 文件列表已经读取" #: src/tar.c:1198 #, c-format msgid "%s: file name read contains nul character" msgstr "%s: 读取的文件名含有空字符" #: src/tar.c:1265 src/tar.c:1269 src/tar.c:1273 src/tar.c:1277 src/tar.c:1281 #: src/tar.c:1285 #, c-format msgid "filter the archive through %s" msgstr "通过 %s 过滤归档" #: src/tar.c:1290 msgid "Valid arguments for the --quoting-style option are:" msgstr "--quoting-style 选项的有效参数为:" #: src/tar.c:1294 msgid "" "\n" "*This* tar defaults to:\n" msgstr "" "\n" "此 tar 默认为:\n" #: src/tar.c:1393 #, fuzzy msgid "Invalid blocking factor" msgstr "无效的块因子" #: src/tar.c:1500 msgid "Invalid tape length" msgstr "无效的磁带长度" #: src/tar.c:1511 msgid "Invalid incremental level value" msgstr "无效的增量度" #: src/tar.c:1557 msgid "More than one threshold date" msgstr "多于一个时间阈值" #: src/tar.c:1612 src/tar.c:1615 #, fuzzy msgid "Invalid sparse version value" msgstr "无效的离散版本值" #: src/tar.c:1700 msgid "--atime-preserve='system' is not supported on this platform" msgstr "此平台不支持 --atime-preserve=‘system’ " #: src/tar.c:1725 msgid "--checkpoint value is not an integer" msgstr "--checkpoint 值不是个整数" #: src/tar.c:1830 msgid "Invalid group" msgstr "无效的组" #: src/tar.c:1837 msgid "Invalid mode given on option" msgstr "选项中给出无效的访问模式" #: src/tar.c:1894 msgid "Invalid number" msgstr "无效的数字" #: src/tar.c:1916 msgid "Invalid owner" msgstr "无效的所有者" #: src/tar.c:1946 msgid "The --preserve option is deprecated, use --preserve-permissions --preserve-order instead" msgstr "--preserve 选项已经废弃了，请使用 --preserve-permissions --preserve-order 代替" #: src/tar.c:1956 msgid "Invalid record size" msgstr "无效的记录大小" #: src/tar.c:1959 #, c-format msgid "Record size must be a multiple of %d." msgstr "记录大小必须是 %d 的倍数。" #: src/tar.c:2000 msgid "Invalid number of elements" msgstr "无效的元素数" #: src/tar.c:2020 msgid "Only one --to-command option allowed" msgstr "仅允许使用一个 --to-command 选项" #: src/tar.c:2100 #, c-format msgid "Malformed density argument: %s" msgstr "错误的压缩参数: %s" #: src/tar.c:2126 #, c-format msgid "Unknown density: `%c'" msgstr "未知的压缩参数: ‘%c’" #: src/tar.c:2143 #, c-format msgid "Options `-[0-7][lmh]' not supported by *this* tar" msgstr "本 tar 不支持选项“-[0-7][lmh]”" #: src/tar.c:2156 msgid "[FILE]..." msgstr "[FILE]..." #: src/tar.c:2274 #, c-format msgid "Old option `%c' requires an argument." msgstr "旧选项“%c”需要参数。" #: src/tar.c:2355 msgid "--occurrence is meaningless without a file list" msgstr "没有一个文件列表时 --occurrence 是没有意义的" #: src/tar.c:2361 msgid "--occurrence cannot be used in the requested operation mode" msgstr "--occurrence 不能用于请求的操作模式中" #: src/tar.c:2379 msgid "Multiple archive files require `-M' option" msgstr "多个归档文件需要使用“-M”选项" #: src/tar.c:2384 msgid "Cannot combine --listed-incremental with --newer" msgstr "无法在使用 --newer 的时候使用 --listed-incremental" #: src/tar.c:2387 msgid "--level is meaningless without --listed-incremental" msgstr "没有 --listed-incremental 选项的话 --level 选项是无意义的" #: src/tar.c:2404 #, c-format msgid "%s: Volume label is too long (limit is %lu byte)" msgid_plural "%s: Volume label is too long (limit is %lu bytes)" msgstr[0] "%s：卷标过长 (限制为 %lu 字节)" #: src/tar.c:2417 msgid "Cannot verify multi-volume archives" msgstr "无法检验多卷归档文件" #: src/tar.c:2419 msgid "Cannot verify compressed archives" msgstr "无法检验压缩归档文件" #: src/tar.c:2425 msgid "Cannot use multi-volume compressed archives" msgstr "无法使用多卷压缩归档文件" #: src/tar.c:2431 msgid "Cannot concatenate compressed archives" msgstr "无法联结压缩归档文件" #: src/tar.c:2443 msgid "--pax-option can be used only on POSIX archives" msgstr "--pax-option 只能用于 POSIX 归档中" #: src/tar.c:2461 msgid "Volume length cannot be less than record size" msgstr "卷长度不可小于记录大小" #: src/tar.c:2464 msgid "--preserve-order is not compatible with --listed-incremental" msgstr "--preserve-order 与 --listed-incremental 不匹配" #: src/tar.c:2475 msgid "Cowardly refusing to create an empty archive" msgstr "谨慎地拒绝创建空归档文件" #: src/tar.c:2501 msgid "Options `-Aru' are incompatible with `-f -'" msgstr "选项“-Aru”与“-f -”不兼容" #: src/tar.c:2592 msgid "You must specify one of the `-Acdtrux' or `--test-label' options" msgstr "您必须从\"-Acdtrux\"或是\"--test-label\"选项中指定一个" #: src/tar.c:2646 #, c-format msgid "Exiting with failure status due to previous errors" msgstr "由于前次错误，将以上次的错误状态退出" #: src/update.c:86 #, c-format msgid "%s: File shrank by %s byte" msgid_plural "%s: File shrank by %s bytes" msgstr[0] "%s：文件缩小 %s 字节" #: src/xheader.c:163 #, c-format msgid "Keyword %s is unknown or not yet implemented" msgstr "关键字 %s 未知或还未实现" #: src/xheader.c:173 msgid "Time stamp is out of allowed range" msgstr "时间标记超出允许范围" #: src/xheader.c:204 #, c-format msgid "Pattern %s cannot be used" msgstr "不能使用模式 %s" #: src/xheader.c:218 #, c-format msgid "Keyword %s cannot be overridden" msgstr "不能覆盖关键字 %s" #: src/xheader.c:541 msgid "Malformed extended header: missing length" msgstr "错误的扩展头: 缺少 length" #: src/xheader.c:549 msgid "Extended header length is out of allowed range" msgstr "扩展头长度超出所允许的范围" #: src/xheader.c:556 #, c-format msgid "Extended header length %*s is out of range" msgstr "扩展头长度 %*s 超出范围" #: src/xheader.c:568 msgid "Malformed extended header: missing blank after length" msgstr "错误的扩展头: length 后缺少空白符" #: src/xheader.c:576 msgid "Malformed extended header: missing equal sign" msgstr "错误的扩展头: 缺少等于符号" #: src/xheader.c:582 msgid "Malformed extended header: missing newline" msgstr "错误的扩展头: 缺少空行" #: src/xheader.c:620 #, c-format msgid "Ignoring unknown extended header keyword `%s'" msgstr "忽略未知的扩展头关键字‘%s’" #: src/xheader.c:830 #, c-format msgid "Generated keyword/value pair is too long (keyword=%s, length=%s)" msgstr "生成的关键字/值对太长了(keyword=%s, length=%s)" #. TRANSLATORS: The first %s is the pax extended header keyword #. (atime, gid, etc.). #: src/xheader.c:862 #, c-format msgid "Extended header %s=%s is out of range %s..%s" msgstr "扩展头 %s=%s 超出范围 %s..%s" #: src/xheader.c:993 src/xheader.c:1023 src/xheader.c:1337 #, c-format msgid "Malformed extended header: invalid %s=%s" msgstr "错误的扩展头: %s=%s 无效" #: src/xheader.c:1290 src/xheader.c:1315 src/xheader.c:1365 #, c-format msgid "Malformed extended header: excess %s=%s" msgstr "错误的扩展头: %s=%s 溢出" #: src/xheader.c:1378 #, c-format msgid "Malformed extended header: invalid %s: unexpected delimiter %c" msgstr "错误的扩展头: %s 无效: 非预期的分隔符 %c" #: src/xheader.c:1388 #, c-format msgid "Malformed extended header: invalid %s: odd number of values" msgstr "错误的扩展头: %s 无效: 奇怪的数值" #: src/checkpoint.c:107 #, c-format msgid "%s: not a valid timeout" msgstr "%s: 无效的超时设置" #: src/checkpoint.c:112 #, c-format msgid "%s: unknown checkpoint action" msgstr "%s: 未知的检查点操作" #: src/checkpoint.c:132 msgid "write" msgstr "写入" #: src/checkpoint.c:132 msgid "read" msgstr "读取" #. TRANSLATORS: This is a ``checkpoint of write operation'', #. *not* ``Writing a checkpoint''. #. E.g. in Spanish ``Punto de comprobaci@'on de escritura'', #. *not* ``Escribiendo un punto de comprobaci@'on'' #: src/checkpoint.c:222 #, c-format msgid "Write checkpoint %u" msgstr "写入操作的检查点 %u" #. TRANSLATORS: This is a ``checkpoint of read operation'', #. *not* ``Reading a checkpoint''. #. E.g. in Spanish ``Punto de comprobaci@'on de lectura'', #. *not* ``Leyendo un punto de comprobaci@'on'' #: src/checkpoint.c:228 #, c-format msgid "Read checkpoint %u" msgstr "读取操作的检查点 %u" #: tests/genfile.c:112 msgid "" "genfile manipulates data files for GNU paxutils test suite.\n" "OPTIONS are:\n" msgstr "" "genfile 为 GNU paxutils 测试软件操作数据文件。\n" "选项为:\n" #: tests/genfile.c:128 msgid "File creation options:" msgstr "文件创建选项:" #: tests/genfile.c:129 tests/genfile.c:140 msgid "SIZE" msgstr "SIZE" #: tests/genfile.c:130 msgid "Create file of the given SIZE" msgstr "创建指定 SIZE 的文件" #: tests/genfile.c:132 msgid "Write to file NAME, instead of standard output" msgstr "写入文件 NAME，而不是标准输出" #: tests/genfile.c:134 msgid "Read file names from FILE" msgstr "从 FILE 读取文件名" #: tests/genfile.c:136 msgid "-T reads null-terminated names" msgstr "-T 读取以 NULL 终止的名字" #: tests/genfile.c:138 msgid "Fill the file with the given PATTERN. PATTERN is 'default' or 'zeros'" msgstr "以指定的 PATTERN 填充文件。PATTERN 可以是‘default’或是‘zeros’" #: tests/genfile.c:141 #, fuzzy msgid "Size of a block for sparse file" msgstr "离散文件的块大小" #: tests/genfile.c:143 #, fuzzy msgid "Generate sparse file. Rest of the command line gives the file map." msgstr "生成离散文件。命令行其余选项指定 map 文件。" #: tests/genfile.c:145 msgid "OFFSET" msgstr "OFFSET" #: tests/genfile.c:146 msgid "Seek to the given offset before writing data" msgstr "在写入数据前定位至指定的偏移位" #: tests/genfile.c:152 msgid "File statistics options:" msgstr "文件统计选项:" #: tests/genfile.c:155 msgid "Print contents of struct stat for each given file. Default FORMAT is: " msgstr "打印每个给定文件的 stat 结构定义的内容。默认 FORMAT 是: " #: tests/genfile.c:162 msgid "Synchronous execution options:" msgstr "同步执行选项:" #: tests/genfile.c:164 msgid "OPTION" msgstr "OPTION" #: tests/genfile.c:165 msgid "Execute ARGS. Useful with --checkpoint and one of --cut, --append, --touch, --unlink" msgstr "执行 ARGS。与 --checkpoint 或 --cut，--append，--touch 中的一个一起使用时有用" #: tests/genfile.c:168 msgid "Perform given action (see below) upon reaching checkpoint NUMBER" msgstr "只要达到 checkpoint NUMBER 指定的数值就执行指定的操作(见下)" #: tests/genfile.c:171 msgid "Set date for next --touch option" msgstr "为下一个 --touch 选项设定日期" #: tests/genfile.c:174 msgid "Display executed checkpoints and exit status of COMMAND" msgstr "显示执行的 checkpoints 以及 COMMAND 的退出状态" #: tests/genfile.c:179 msgid "Synchronous execution actions. These are executed when checkpoint number given by --checkpoint option is reached." msgstr "同步执行操作。当达到由 --checkpoint 选项指定的 checkpoint 数值时会执行这些操作。" #: tests/genfile.c:182 msgid "Truncate FILE to the size specified by previous --length option (or 0, if it is not given)" msgstr "截短 FILE 至由前面 --length 选项指定的大小(如果未指定的话，默认 0)" #: tests/genfile.c:186 msgid "Append SIZE bytes to FILE. SIZE is given by previous --length option." msgstr "添加 SIZE 字节至 FILE。SIZE 由前面的 --length 选项指定。" #: tests/genfile.c:189 msgid "Update the access and modification times of FILE" msgstr "更新 FILE 的访问和修改时间" #: tests/genfile.c:192 msgid "Execute COMMAND" msgstr "执行 COMMAND" #: tests/genfile.c:195 msgid "Unlink FILE" msgstr "删除 FILE" #: tests/genfile.c:245 #, c-format msgid "Invalid size: %s" msgstr "无效的值: %s" #: tests/genfile.c:250 #, c-format msgid "Number out of allowed range: %s" msgstr "数值超出所允许的范围: %s" #: tests/genfile.c:253 #, c-format msgid "Negative size: %s" msgstr "负值: %s" #: tests/genfile.c:266 tests/genfile.c:568 #, c-format msgid "stat(%s) failed" msgstr "stat(%s) 错误" #: tests/genfile.c:269 #, c-format msgid "requested file length %lu, actual %lu" msgstr "需要文件长度为 %lu，实际为 %lu" #: tests/genfile.c:273 #, c-format msgid "created file is not sparse" msgstr "所创建的文件非稀疏文件" #: tests/genfile.c:362 #, c-format msgid "Error parsing number near `%s'" msgstr "“%s”附近解析数字错误" #: tests/genfile.c:368 #, c-format msgid "Unknown date format" msgstr "未知的数据格式" #: tests/genfile.c:392 msgid "[ARGS...]" msgstr "[ARGS...]" #: tests/genfile.c:429 tests/genfile.c:469 tests/genfile.c:522 #: tests/genfile.c:672 tests/genfile.c:686 #, c-format msgid "cannot open `%s'" msgstr "无法打开“%s”" #: tests/genfile.c:435 msgid "cannot seek" msgstr "无法定位" #: tests/genfile.c:452 #, c-format msgid "file name contains null character" msgstr "文件名包含空字符" #: tests/genfile.c:517 #, c-format msgid "cannot generate sparse files on standard output, use --file option" msgstr "使用 --file 选项无法在标准输出上生成离散文件" #: tests/genfile.c:595 #, c-format msgid "incorrect mask (near `%s')" msgstr "不正确的掩码(“%s”附近)" #: tests/genfile.c:601 tests/genfile.c:634 #, c-format msgid "Unknown field `%s'" msgstr "未知的文件掩码位“%s”" #: tests/genfile.c:661 #, c-format msgid "cannot set time on `%s'" msgstr "无法设定“%s”的时间" #: tests/genfile.c:700 #, c-format msgid "cannot unlink `%s'" msgstr "无法删除 \"%s\"" #: tests/genfile.c:826 #, c-format msgid "Command exited successfully\n" msgstr "命令成功退出\n" #: tests/genfile.c:828 #, c-format msgid "Command failed with status %d\n" msgstr "命令出错，状态 %d\n" #: tests/genfile.c:832 #, c-format msgid "Command terminated on signal %d\n" msgstr "命令由信号 %d 终止了\n" #: tests/genfile.c:834 #, c-format msgid "Command stopped on signal %d\n" msgstr "命令由信号 %d 停止了\n" #: tests/genfile.c:837 #, c-format msgid "Command dumped core\n" msgstr "命令输出 core\n" #: tests/genfile.c:840 #, c-format msgid "Command terminated\n" msgstr "命令终止\n" #: tests/genfile.c:872 #, c-format msgid "--stat requires file names" msgstr "--stat 选项需要文件名" #~ msgid "Cannot resolve hostname %s" #~ msgstr "无法解析主机 %s" #~ msgid "suppress this warning." #~ msgstr "不显示此警告。" #~ msgid "%s: illegal option -- %c\n" #~ msgstr "%s：非法选项 -- %c\n" #~ msgid "" #~ "\n" #~ "Report bugs to <%s>.\n" #~ msgstr "" #~ "\n" #~ "将错误报告到 <%s>。\n" #~ msgid "Input string too long" #~ msgstr "输入字符串太长了" #~ msgid "Number syntax error" #~ msgstr "编号语法错误" #~ msgid "rmtd: Cannot allocate buffer space\n" #~ msgstr "rmtd：无法分配缓冲区空间\n" #~ msgid "Cannot allocate buffer space" #~ msgstr "无法分配缓冲区空间" #~ msgid "Try `%s --help' for more information.\n" #~ msgstr "请用“%s --help”获得更多信息。\n" #~ msgid "" #~ "Usage: %s [OPTION]\n" #~ "Manipulate a tape drive, accepting commands from a remote process.\n" #~ "\n" #~ " --version Output version info.\n" #~ " --help Output this help.\n" #~ msgstr "" #~ "用法：%s [选项]\n" #~ "操作磁带驱动器，接受来自远程进程的命令。\n" #~ "\n" #~ " --version 输出版本信息。\n" #~ " --help 输出此帮助。\n" #~ msgid "Seek offset error" #~ msgstr "定位偏移量错误" #~ msgid "Premature end of file" #~ msgstr "过早的文件结尾" #~ msgid "Reading %s\n" #~ msgstr "正在读入 %s\n" #~ msgid "Error is not recoverable: exiting now" #~ msgstr "错误不可恢复：现在退出" #~ msgid "filter the archive through bzip2" #~ msgstr "通过 bzip2 过滤归档" #~ msgid "filter the archive through gzip" #~ msgstr "通过 gzip 过滤归档" #~ msgid "filter the archive through compress" #~ msgstr "通过 compress 过滤归档" #~ msgid "filter the archive through lzma" #~ msgstr "通过 lzma 过滤归档" #~ msgid "filter the archive through lzop" #~ msgstr "通过 lzop 过滤归档" #~ msgid "Warning: the -I option is not supported; perhaps you meant -j or -T?" #~ msgstr "警告：不支持 -I 选项，或许您的意思是 -j 或者 -T ？" #~ msgid "Error exit delayed from previous errors" #~ msgstr "由于前面延迟的错误而退出" #~ msgid "block size" #~ msgstr "块大小" #~ msgid "WARNING: No volume header" #~ msgstr "警告：没有卷头" #~ msgid "Visible long name error" #~ msgstr "可见的长文件名错误" #~ msgid "Device number out of range" #~ msgstr "设备号超出范围" #~ msgid "Visible longname error" #~ msgstr "可见的长文件名错误" #~ msgid "Renamed %s to %s" #~ msgstr "将 %s 改名为 %s" #~ msgid "%s: Cannot symlink to %s" #~ msgstr "%s：无法符号连接到 %s" #~ msgid "Symlinked %s to %s" #~ msgstr "将 %s 符号连接到 %s" #~ msgid "Unknown demangling command %s" #~ msgstr "未知的反转换命令 %s" #~ msgid "Missing file name after -C" #~ msgstr "-C 之后缺少文件名" #~ msgid "" #~ "This program comes with NO WARRANTY, to the extent permitted by law.\n" #~ "You may redistribute it under the terms of the GNU General Public License;\n" #~ "see the file named COPYING for details." #~ msgstr "" #~ "在法律许可的范围内，本程序不提供任何担保。\n" #~ "您可以在 GNU 一般通用许可证的条款下分发本程序；\n" #~ "请参考名为 COPYING 的文件以了解详细信息。" #~ msgid "rmtd: Garbage command %c\n" #~ msgstr "rmtd：垃圾命令 %c\n" #~ msgid "" #~ "GNU `tar' saves many files together into a single tape or disk archive, and\n" #~ "can restore individual files from the archive.\n" #~ msgstr "" #~ "GNU“tar”将许多文件保存到一个磁带或磁盘归档文件中，\n" #~ "并可以从归档文件中恢复各个文件。\n" #~ msgid "" #~ "\n" #~ "If a long option shows an argument as mandatory, then it is mandatory\n" #~ "for the equivalent short option also. Similarly for optional arguments.\n" #~ msgstr "" #~ "\n" #~ "如果长选项表明参数是必需的，那么对等价的短选项\n" #~ "来说它同样是必需的。对可选的参数来说也类似。\n" #~ msgid "" #~ "\n" #~ "Main operation mode:\n" #~ " -t, --list list the contents of an archive\n" #~ " -x, --extract, --get extract files from an archive\n" #~ " -c, --create create a new archive\n" #~ " -d, --diff, --compare find differences between archive and file system\n" #~ " -r, --append append files to the end of an archive\n" #~ " -u, --update only append files newer than copy in archive\n" #~ " -A, --catenate append tar files to an archive\n" #~ " --concatenate same as -A\n" #~ " --delete delete from the archive (not on mag tapes!)\n" #~ msgstr "" #~ "\n" #~ "主要操作模式：\n" #~ " -t, --list 列出归档文件内容目录\n" #~ " -x, --extract, --get 从归档文件中展开文件\n" #~ " -c, --create 创建新的归档文件\n" #~ " -d, --diff, --compare 找出归档文件和文件系统的不同之处\n" #~ " -r, --append 将文件附加到归档文件之后\n" #~ " -u, --update 只附加比归档中新的文件\n" #~ " -A, --catenate 将 tar 文件附加到归档文件之后\n" #~ " --concatenate 与 -A 相同\n" #~ " --delete 从归档文件中删除 (不能在磁带上！)\n" #~ msgid "" #~ "\n" #~ "Operation modifiers:\n" #~ " -W, --verify attempt to verify the archive after writing it\n" #~ " --remove-files remove files after adding them to the archive\n" #~ " -k, --keep-old-files don't replace existing files when extracting\n" #~ " --keep-newer-files don't replace existing files that are newer\n" #~ " than their archive copies\n" #~ " --overwrite overwrite existing files when extracting\n" #~ " --no-overwrite-dir preserve metadata of existing directories\n" #~ " -U, --unlink-first remove each file prior to extracting over it\n" #~ " --recursive-unlink empty hierarchies prior to extracting directory\n" #~ " -S, --sparse handle sparse files efficiently\n" #~ " -O, --to-stdout extract files to standard output\n" #~ " -G, --incremental handle old GNU-format incremental backup\n" #~ " -g, --listed-incremental=FILE\n" #~ " handle new GNU-format incremental backup\n" #~ " --ignore-failed-read do not exit with nonzero on unreadable files\n" #~ " --occurrence[=NUM] process only the NUMth occurrence of each file in\n" #~ " the archive. This option is valid only in\n" #~ " conjunction with one of the subcommands --delete,\n" #~ " --diff, --extract or --list and when a list of\n" #~ " files is given either on the command line or\n" #~ " via -T option.\n" #~ " NUM defaults to 1.\n" #~ msgstr "" #~ "\n" #~ "操作修饰符：\n" #~ " -W, --verify 试图在写入归档之后对其进行验证\n" #~ " --remove-files 在将文件添加到归档之后删除文件\n" #~ " -k, --keep-old-files 在展开时不替换已存在的文件\n" #~ " --keep-newer-files 不替换比归档中的副本更新的文件\n" #~ " --overwrite 在展开时覆盖已存在的文件\n" #~ " --no-overwrite-dir 在展开时保持已存在目录元数据\n" #~ " -U, --unlink-first 在展开文件之前删除已存在的文件\n" #~ " --recursive-unlink 在展开目录之前清空目录结构\n" #~ " -S, --sparse 有效地处理离散文件\n" #~ " -O, --to-stdout 将文件展开到标准输出\n" #~ " -G, --incremental 处理旧 GNU-格式的增量备份\n" #~ " -g, --listed-incremental=FILE\n" #~ " 处理新 GNU-格式的增量备份\n" #~ " --ignore-failed-read 遇到不可读文件时不退出\n" #~ " --occurrence[=NUM] 仅处理归档中每个文件的第 NUM 次出现\n" #~ " 此选项只在和 --delete，--diff，--extract 或者 --list\n" #~ " 等子命令一起使用时，并且当没有通过命令行或 -T\n" #~ " 选项提供一个文件列表时才有效。\n" #~ " NUM 默认为 1.\n" #~ msgid "" #~ "\n" #~ "Handling of file attributes:\n" #~ " --owner=NAME force NAME as owner for added files\n" #~ " --group=NAME force NAME as group for added files\n" #~ " --mode=CHANGES force (symbolic) mode CHANGES for added files\n" #~ " --atime-preserve don't change access times on dumped files\n" #~ " -m, --modification-time don't extract file modified time\n" #~ " --same-owner try extracting files with the same ownership\n" #~ " --no-same-owner extract files as yourself\n" #~ " --numeric-owner always use numbers for user/group names\n" #~ " -p, --same-permissions extract permissions information\n" #~ " --no-same-permissions do not extract permissions information\n" #~ " --preserve-permissions same as -p\n" #~ " -s, --same-order sort names to extract to match archive\n" #~ " --preserve-order same as -s\n" #~ " --preserve same as both -p and -s\n" #~ msgstr "" #~ "\n" #~ "处理文件属性：\n" #~ " --owner=NAME 将被添加的文件所有者设置为 NAME\n" #~ " --group=NAME 将被添加的文件所属的组设置为 NAME\n" #~ " --mode=CHANGES 将被添加的文件的属性设置为 CHANGES\n" #~ " --atime-preserve 不要改变输出文件的访问时间\n" #~ " -m, --modification-time 不要展开文件的修改时间\n" #~ " --same-owner 试图以相同的所有权展开文件\n" #~ " --no-same-owner 以您自己的身份展开文件\n" #~ " --numeric-owner 总是用编号作为用户/组的名字\n" #~ " -p, --same-permissions 展开权限信息\n" #~ " --no-same-permissions 不展开权限信息\n" #~ " --preserve-permissions 与 -p 相同\n" #~ " -s, --same-order 对要展开的名称进行排序以便与归档匹配\n" #~ " --preserve-order 与 -s 相同\n" #~ " --preserve 与 -p 和 -s 都相同\n" #~ msgid "" #~ "\n" #~ "Device selection and switching:\n" #~ " -f, --file=ARCHIVE use archive file or device ARCHIVE\n" #~ " --force-local archive file is local even if has a colon\n" #~ " --rmt-command=COMMAND use given rmt COMMAND instead of /etc/rmt\n" #~ " --rsh-command=COMMAND use remote COMMAND instead of rsh\n" #~ " -[0-7][lmh] specify drive and density\n" #~ " -M, --multi-volume create/list/extract multi-volume archive\n" #~ " -L, --tape-length=NUM change tape after writing NUM x 1024 bytes\n" #~ " -F, --info-script=FILE run script at end of each tape (implies -M)\n" #~ " --new-volume-script=FILE same as -F FILE\n" #~ " --volno-file=FILE use/update the volume number in FILE\n" #~ msgstr "" #~ "\n" #~ "设备选择与切换：\n" #~ " -f, --file=ARCHIVE 使用归档文件或设备 ARCHIVE\n" #~ " --force-local 即使含有冒号，归档文件也是本地文件\n" #~ " --rmt-command=COMMAND 用给定的 rmt COMMAND 代替 /etc/rmt\n" #~ " --rsh-command=COMMAND 用远程 COMMAND 代替 rsh\n" #~ " -[0-7][lmh] 指定驱动器和密度\n" #~ " -M, --multi-volume 创建/列举/展开多卷归档文件\n" #~ " -L, --tape-length=NUM 在写入 NUM x 1024 个字节后更换磁带\n" #~ " -F, --info-script=FILE 在每个磁带末端运行脚本 (隐含 -M)\n" #~ " --new-volume-script=FILE 与 -F FILE 相同\n" #~ " --volno-file=FILE 使用/更新 FILE 中的卷编号\n" #~ msgid "" #~ "\n" #~ "Device blocking:\n" #~ " -b, --blocking-factor=BLOCKS BLOCKS x 512 bytes per record\n" #~ " --record-size=SIZE SIZE bytes per record, multiple of 512\n" #~ " -i, --ignore-zeros ignore zeroed blocks in archive (means EOF)\n" #~ " -B, --read-full-records reblock as we read (for 4.2BSD pipes)\n" #~ msgstr "" #~ "\n" #~ "设备分块：\n" #~ " -b, --blocking-factor=BLOCKS 每个记录 BLOCKS x 512 个字节\n" #~ " --record-size=SIZE 每个记录 SIZE 个字节，512 的倍数\n" #~ " -i, --ignore-zeros 忽略归档中全为零的块 (标示文件结束)\n" #~ " -B, --read-full-records 当我们读入时重新分块 (为 4.2BSD 管道提供)\n" #~ msgid "" #~ "\n" #~ "Archive format selection:\n" #~ " --format=FMTNAME create archive of the given format.\n" #~ " FMTNAME is one of the following:\n" #~ " v7 old V7 tar format\n" #~ " oldgnu GNU format as per tar <= 1.12\n" #~ " gnu GNU tar 1.13 format\n" #~ " ustar POSIX 1003.1-1988 (ustar) format\n" #~ " posix POSIX 1003.1-2001 (pax) format\n" #~ " --old-archive, --portability same as --format=v7\n" #~ " --posix same as --format=posix\n" #~ " --pax-option keyword[[:]=value][,keyword[[:]=value], ...]\n" #~ " control pax keywords\n" #~ " -V, --label=NAME create archive with volume name NAME\n" #~ " PATTERN at list/extract time, a globbing PATTERN\n" #~ " -j, --bzip2 filter the archive through bzip2\n" #~ " -z, --gzip, --ungzip filter the archive through gzip\n" #~ " -Z, --compress, --uncompress filter the archive through compress\n" #~ " --use-compress-program=PROG filter through PROG (must accept -d)\n" #~ msgstr "" #~ "\n" #~ "归档格式选择：\n" #~ " --format=FMTNAME 创建指定格式的归档。\n" #~ " FMTNAME 为下列格式中的一个：\n" #~ " v7 旧式 V7 tar 格式\n" #~ " oldgnu tar <= 1.12 时的 GNU 格式\n" #~ " gnu GNU tar 1.13 格式\n" #~ " ustar POSIX 1003.1-1988 (ustar) 格式\n" #~ " posix POSIX 1003.1-2001 (pax) 格式\n" #~ " --old-archive, --portability 与 --format=v7 相同\n" #~ " --posix 与 --format=posix 相同\n" #~ " --pax-option keyword[[:]=value][,keyword[[:]=value], ...]\n" #~ " 控制 pax 关键字\n" #~ " -V, --label=NAME 以卷标名 NAME 创建归档\n" #~ " PATTERN 在列出/展开时，一个模糊匹配 PATTERN\n" #~ " -j, --bzip2 用 bzip2 过滤归档\n" #~ " -z, --gzip, --ungzip 用 gzip 过滤归档\n" #~ " -Z, --compress, --uncompress 用 compress 过滤归档\n" #~ " --use-compress-program=PROG 用程序 PROG(必须接受参数 -d) 过滤归档\n" #~ msgid "" #~ "\n" #~ "Local file selection:\n" #~ " -C, --directory=DIR change to directory DIR\n" #~ " -T, --files-from=NAME get names to extract or create from file NAME\n" #~ " --null -T reads null-terminated names, disable -C\n" #~ " --exclude=PATTERN exclude files, given as a PATTERN\n" #~ " -X, --exclude-from=FILE exclude patterns listed in FILE\n" #~ " --anchored exclude patterns match file name start (default)\n" #~ " --no-anchored exclude patterns match after any /\n" #~ " --ignore-case exclusion ignores case\n" #~ " --no-ignore-case exclusion is case sensitive (default)\n" #~ " --wildcards exclude patterns use wildcards (default)\n" #~ " --no-wildcards exclude patterns are plain strings\n" #~ " --wildcards-match-slash exclude pattern wildcards match '/' (default)\n" #~ " --no-wildcards-match-slash exclude pattern wildcards do not match '/'\n" #~ " -P, --absolute-names don't strip leading `/'s from file names\n" #~ " -h, --dereference dump instead the files symlinks point to\n" #~ " --no-recursion avoid descending automatically in directories\n" #~ " -l, --one-file-system stay in local file system when creating archive\n" #~ " -K, --starting-file=NAME begin at file NAME in the archive\n" #~ " --strip-path=NUM strip NUM leading components from file names\n" #~ " before extraction\n" #~ msgstr "" #~ "\n" #~ "本地文件选择：\n" #~ " -C, --directory=DIR 进入目录 DIR\n" #~ " -T, --files-from=NAME 从文件 NAME 中获取要展开或创建的文件名\n" #~ " --null -T 读入以 null 终止的名称，禁用 -C\n" #~ " --exclude=PATTERN 除去匹配 PATTERN 的文件\n" #~ " -X, --exclude-from=FILE 出去匹配在 FILE 中列出的模式的文件\n" #~ " --anchored 去除模式匹配文件起点 (默认)\n" #~ " --no-anchored 去除任何 / 之后的模式匹配\n" #~ " --ignore-case 去除匹配时忽略大小写\n" #~ " --no-ignore-case 去除匹配时关心大小写 (默认)\n" #~ " --wildcards 在去除匹配时使用通配符 (默认)\n" #~ " --no-wildcards 在去除匹配时使用普通字符串\n" #~ " --wildcards-match-slash 去除模式通配符匹配“/” (默认)\n" #~ " --no-wildcards-match-slash 去除模式通配符不匹配“/”\n" #~ " -P, --absolute-names 不要从文件名中去掉最前头的“/”\n" #~ " -h, --dereference 输出连接指向的文件而不是文件连接\n" #~ " --no-recursion 避免在目录间自动递归\n" #~ " -l, --one-file-system 创建归档文件时留在本地文件系统中\n" #~ " -K, --starting-file=NAME 从归档中的文件 NAME 开始\n" #~ " --strip-path=NUM 展开前从文件名中删除前面的 NUM 个元素\n" #~ msgid "" #~ " -N, --newer=DATE-OR-FILE only store files newer than DATE-OR-FILE\n" #~ " --newer-mtime=DATE compare date and time when data changed only\n" #~ " --after-date=DATE same as -N\n" #~ msgstr "" #~ " -N, --newer=DATE-OR-FILE 只存储比指定的日期或者文件更新的文件\n" #~ " --newer-mtime=DATE 只在数据发生变化时比较日期和时间\n" #~ " --after-date=DATE 与 -N 相同\n" #~ msgid "" #~ " --backup[=CONTROL] backup before removal, choose version control\n" #~ " --suffix=SUFFIX backup before removal, override usual suffix\n" #~ msgstr "" #~ " --backup[=CONTROL] 在删除前备份，选择版本控制\n" #~ " --suffix=SUFFIX 在删除前备份，覆盖常用后缀\n" #~ msgid "" #~ "\n" #~ "Informative output:\n" #~ " --help print this help, then exit\n" #~ " --version print tar program version number, then exit\n" #~ " -v, --verbose verbosely list files processed\n" #~ " --checkpoint print directory names while reading the archive\n" #~ " --check-links print a message if not all links are dumped\n" #~ " --totals print total bytes written while creating archive\n" #~ " --index-file=FILE send verbose output to FILE\n" #~ " --utc print file modification dates in UTC\n" #~ " -R, --block-number show block number within archive with each message\n" #~ " -w, --interactive ask for confirmation for every action\n" #~ " --confirmation same as -w\n" #~ msgstr "" #~ "\n" #~ "提示性输出：\n" #~ " --help 打印该求助信息，而后退出\n" #~ " --version 打印 tar 程序的版本号，而后退出\n" #~ " -v, --verbose 详细列出处理的文件\n" #~ " --checkpoint 在读入归档文件时打印目录名\n" #~ " --check-links 如果未输出所以连接则打印一条消息\n" #~ " --totals 在创建归档文件时打印总计写入的字节数\n" #~ " --index-file=FILE 输出详细输出到文件 FILE\n" #~ " --utc 以 UTC 格式打印文件修改时间\n" #~ " -R, --block-number 在每条消息中都显示归档文件中的块编号\n" #~ " -w, --interactive 每一动作都请求确认\n" #~ " --confirmation 与 -w 相同\n" #~ msgid "" #~ "\n" #~ "ARCHIVE may be FILE, HOST:FILE or USER@HOST:FILE; DATE may be a textual date\n" #~ "or a file name starting with `/' or `.', in which case the file's date is used.\n" #~ "*This* `tar' defaults to `--format=%s -f%s -b%d'.\n" #~ msgstr "" #~ "\n" #~ "ARCHIVE 可以是 FILE，HOST:FILE 或者 USER@HOST:FILE；DATE 可以是一文字时间\n" #~ "或者是一以“/”或“.”开头的文件名，这时使用该文件的时间。\n" #~ "*本* “tar” 默认为“--format=%s -f%s -b%d”。\n" #~ msgid "Warning: the -y option is not supported; perhaps you meant -j?" #~ msgstr "警告：不支持 -y 选项；您的意思可能是 -j？" #~ msgid "Written by John Gilmore and Jay Fenlason." #~ msgstr "由 John Gilmore 和 Jay Fenlason 编写。"