# Simplified Chinese Messages for tin. # Copyright (C) 2011 The tin Project (msgids). # This file is distributed under the same license as the tin package. # Shih-Kun Huang (ctin-1.22), Jian-Da Li (ctin-1.3), 1997. # Wei-Lun Chao , 2012, 2013. # Mingye Wang , 2015 # msgid "" msgstr "" "Project-Id-Version: tin 2.3.1\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2024-12-21 15:42+0100\n" "PO-Revision-Date: 2015-08-28 12:21+0800\n" "Last-Translator: Mingye Wang \n" "Language-Team: Chinese (simplified) \n" "Language: zh_CN\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Bugs: Report translation errors to the Language-Team address.\n" "Plural-Forms: nplurals=1; plural=0;\n" "X-Generator: Poedit 1.8.4\n" #: src/lang.c:48 msgid "1 Response" msgstr "1 篇回应" #: src/lang.c:50 #, c-format msgid "" "\n" "%s contains no newsgroups. Exiting." msgstr "" "\n" "%s 不含任何新闻群组。离开。" #: src/lang.c:52 msgid "Aborting read, please wait..." msgstr "放弃读取，请稍待…" #: src/lang.c:54 msgid "all" msgstr "所有" #: src/lang.c:55 msgid "All groups" msgstr "所有群组" #: src/lang.c:56 #, c-format msgid "File %s exists. %s=append, %s=overwrite, %s=quit: " msgstr "文件 %s 已存在。%s=附加，%s=覆写，%s=离开：" #: src/lang.c:57 msgid "Article cancelled (deleted)." msgstr "已取消文章 (被删除)。" #: src/lang.c:59 msgid "Article cannot be cancelled (deleted)." msgstr "无法取消文章 (被删除)。" #: src/lang.c:61 msgid "Article deleted." msgstr "已删除文章。" #: src/lang.c:62 #, c-format msgid "" "\n" "Your article:\n" " \"%s\"\n" "will be mailed to the following address:\n" " %s" msgstr "" "\n" "您的文章：\n" " “%s”\n" "将被张贴到下列地址：\n" " %s" #: src/lang.c:63 #, c-format msgid "" "\n" "Your article:\n" " \"%s\"\n" "will be posted to the following %s:\n" msgstr "" "\n" "您的文章：\n" " “%s”\n" "将被张贴到下列 %s：\n" #: src/lang.c:64 msgid "Article not posted!" msgstr "无法张贴文章！" #: src/lang.c:65 msgid "Article not saved" msgstr "无法保存文章" #: src/lang.c:66 msgid "Article Level Commands" msgstr "文章层级指令" #: src/lang.c:67 msgid "Article has no parent" msgstr "文章没有任何上层" #: src/lang.c:68 msgid "Parent article has been killed" msgstr "上层文章已被砍除" #: src/lang.c:69 msgid "Parent article is unavailable" msgstr "上层文章无法使用" #: src/lang.c:70 #, c-format msgid "Article posted: %s" msgstr "已张贴文章：%s" #: src/lang.c:71 #, c-format msgid "Article rejected (saved to %s)" msgstr "已拒绝文章 (保存到 %s)" #: src/lang.c:72 #, c-format msgid "%s=article, %s=thread, %s=range, %s=hot, %s=pattern, %s=tagged, %s=quit: " msgstr "%s=文章，%s=讨论串，%s=范围，%s=热门，%s=模式，%s=已标记，%s=离开：" #: src/lang.c:73 msgid "Article unavailable" msgstr "无法使用文章" #: src/lang.c:74 msgid "Article undeleted." msgstr "取消删除文章。" #: src/lang.c:75 #, c-format msgid "Article %4d of %4d" msgstr "文章 %4d 之于 %4d" #: src/lang.c:77 #, fuzzy #| msgid "Article not saved" msgid "Article Info Page" msgstr "无法保存文章" #: src/lang.c:78 msgid "articles" msgstr "文章" #: src/lang.c:79 msgid "This is a repost of the following article:" msgstr "这是以下文章的重新张贴：" #: src/lang.c:80 msgid "article" msgstr "文章" #: src/lang.c:81 msgid "Article" msgstr "文章" #: src/lang.c:82 #, c-format msgid "-- %d %s mailed --" msgstr "-- %d %s 已寄出 --" #: src/lang.c:83 #, c-format msgid " at %s" msgstr " 于 %s" #: src/lang.c:86 #, fuzzy, c-format #| msgid ", charset: " msgid "charset %s" msgstr "，字符集：" #: src/lang.c:87 #, c-format msgid "content subtype %s" msgstr "" #: src/lang.c:88 #, c-format msgid "content type %s" msgstr "" #: src/lang.c:89 #, c-format msgid "%*s[-- charset %s not supported --]\n" msgstr "%*s[-- 不支持 %s 字符集 --]\n" #: src/lang.c:90 #, c-format msgid "%*s[-- Description: %s --]\n" msgstr "%*s[-- 描述：%s --]\n" #: src/lang.c:91 #, fuzzy, c-format #| msgid "Opening %s" msgid "encoding %s" msgstr "打开 %s" #: src/lang.c:97 #, fuzzy, c-format #| msgid "Trying %s" msgid "lang %s" msgstr "尝试 %s" #: src/lang.c:98 #, fuzzy, c-format #| msgid "%d lines" msgid "%s lines" msgstr "%d 行" #: src/lang.c:99 #, fuzzy, c-format #| msgid ", name: " msgid "name %s" msgstr "，名称：" #: src/lang.c:100 msgid ", " msgstr "" #: src/lang.c:101 #, c-format msgid "size %s" msgstr "" #: src/lang.c:102 msgid "" "This message has been composed in the 'multipart/mixed' MIME-format. If you\n" "are reading this prefix, your mail reader probably has not yet been modified\n" "to understand the new format, and some of what follows may look strange.\n" "\n" msgstr "" "这个消息已被写在‘多部件/混合’的 MIME 格式中。如果您\n" "正在读取这个前缀，您的邮件阅读器或许尚未被修改\n" "以了解新的格式，而随后而来的东西也许看起来会很怪异。\n" "\n" #: src/lang.c:106 msgid "Attachment Menu" msgstr "附件菜单" #: src/lang.c:107 msgid "Attachment Menu Commands" msgstr "附件功能表指令" #: src/lang.c:108 msgid "" msgstr "<没有名称>" #: src/lang.c:109 #, c-format msgid "Attachment saved successfully. (%s)" msgstr "成功保存附件。(%s)" #: src/lang.c:110 #, c-format msgid "%d of %d attachments saved successfully." msgstr "成功保存 %2$d 中的 %1$d 项附件。" #: src/lang.c:111 msgid "Select attachment> " msgstr "选取附件>" #: src/lang.c:112 msgid "Tagged attachment" msgstr "已标记附件" #: src/lang.c:113 #, c-format msgid "%d attachments tagged" msgstr "%d 附件已标记" #: src/lang.c:114 msgid "Untagged attachment" msgstr "已取消附件标记" #: src/lang.c:117 msgid "" "# Do not edit this comment block\n" "#\n" msgstr "" "# 不编辑这个评论区块\n" "#\n" #: src/lang.c:118 msgid "# scope=STRING (eg. alt.*,!alt.bin*) [mandatory]\n" msgstr "# scope=字串 (例如：alt.*,!alt.bin*) [必要]\n" #: src/lang.c:119 msgid "# add_posted_to_filter=ON/OFF\n" msgstr "# add_posted_to_filter=ON/OFF\n" #: src/lang.c:120 msgid "# advertising=ON/OFF\n" msgstr "# advertising=ON/OFF\n" #: src/lang.c:121 msgid "# alternative_handling=ON/OFF\n" msgstr "# alternative_handling=ON/OFF\n" #: src/lang.c:122 msgid "# ask_for_metamail=ON/OFF\n" msgstr "# ask_for_metamail=ON/OFF\n" #: src/lang.c:123 msgid "# auto_cc_bcc=NUM\n" msgstr "# auto_cc_bcc=数字\n" #: src/lang.c:124 msgid "# 0=No, 1=Cc, 2=Bcc, 3=Cc and Bcc\n" msgstr "# 0=无，1=抄送，2=密件抄送，3=抄送和密件抄送\n" #: src/lang.c:125 msgid "# auto_list_thread=ON/OFF\n" msgstr "# auto_list_thread=ON/OFF\n" #: src/lang.c:126 msgid "# auto_select=ON/OFF\n" msgstr "# auto_select=ON/OFF\n" #: src/lang.c:127 msgid "# batch_save=ON/OFF\n" msgstr "# batch_save=ON/OFF\n" #: src/lang.c:128 #, fuzzy #| msgid "# date_format=STRING (eg. %%a, %%d %%b %%Y %%H:%%M:%%S)\n" msgid "# date_format=STRING (eg. %a, %d %b %Y %H:%M:%S)\n" msgstr "# date_format=字串 (例如：%%a，%%d %%b %%Y %%H:%%M:%%S)\n" #: src/lang.c:129 msgid "# delete_tmp_files=ON/OFF\n" msgstr "# delete_tmp_files=ON/OFF\n" #: src/lang.c:130 #, fuzzy #| msgid "# editor_format=STRING (eg. %%E +%%N %%F)\n" msgid "# editor_format=STRING (eg. %E +%N %F)\n" msgstr "# editor_format=字串 (例如：%%E+%%N %%F)\n" #: src/lang.c:131 msgid "# fcc=STRING (eg. =mailbox)\n" msgstr "# fcc=字串 (例如：=mailbox)\n" #: src/lang.c:132 msgid "# followup_to=STRING\n" msgstr "# followup_to=字串\n" #: src/lang.c:133 msgid "# from=STRING (just append wanted From:-line, don't use quotes)\n" msgstr "# from=字串 (仅附加想要的发信者 :-line，不使用引言)\n" #: src/lang.c:134 msgid "# group_catchup_on_exit=ON/OFF\n" msgstr "# group_catchup_on_exit=ON/OFF\n" #: src/lang.c:135 #, fuzzy #| msgid "# group_format=STRING (eg. %%n %%m %%R %%L %%s %%F)\n" msgid "# group_format=STRING (eg. %n %m %R %L %s %F)\n" msgstr "# group_format=字串 (例如：%%n %%m %%R %%L %%s %%F)\n" #: src/lang.c:136 msgid "# mail_8bit_header=ON/OFF\n" msgstr "# mail_8 bit_header=ON/OFF\n" #: src/lang.c:137 msgid "# mail_mime_encoding=supported_encoding" msgstr "# mail_mime_encoding=supported_encoding" #: src/lang.c:139 msgid "# ispell=STRING\n" msgstr "# ispell=字串\n" #: src/lang.c:141 msgid "# maildir=STRING (eg. ~/Mail)\n" msgstr "# maildir=字串 (例如：~/Mail)\n" #: src/lang.c:142 msgid "# mailing_list=STRING (eg. majordomo@example.org)\n" msgstr "# mailing_list=字串 (例如：majordomo@example.org)\n" #: src/lang.c:143 msgid "# mime_types_to_save=STRING (eg. image/*,!image/bmp)\n" msgstr "# mime_types_to_save=字串 (例如：image/*,!image/bmp)\n" #: src/lang.c:144 msgid "# mark_ignore_tags=ON/OFF\n" msgstr "# mark_ignore_tags=ON/OFF\n" #: src/lang.c:145 msgid "# mark_saved_read=ON/OFF\n" msgstr "# mark_saved_read=ON/OFF\n" #: src/lang.c:146 msgid "# mime_forward=ON/OFF\n" msgstr "# mime_forward=ON/OFF\n" #: src/lang.c:148 msgid "# mm_network_charset=supported_charset" msgstr "# mm_network_charset=支持的字符集" #: src/lang.c:149 msgid "# undeclared_charset=STRING (default is US-ASCII)\n" msgstr "# undeclared_charset=字串 (缺省是 US-ASCII)\n" #: src/lang.c:151 #, fuzzy #| msgid "# undeclared_charset=STRING (default is US-ASCII)\n" msgid "# undeclared_cs_guess=ON/OFF (default is OFF)\n" msgstr "# undeclared_charset=字串 (缺省是 US-ASCII)\n" #: src/lang.c:154 msgid "# news_headers_to_display=STRING\n" msgstr "# news_headers_to_display=字串\n" #: src/lang.c:155 msgid "# news_headers_to_not_display=STRING\n" msgstr "# news_headers_to_not_display=字串\n" #: src/lang.c:156 msgid "# news_quote_format=STRING\n" msgstr "# news_quote_format=字串\n" #: src/lang.c:157 msgid "# organization=STRING (if beginning with '/' read from file)\n" msgstr "# organization=字串 (如果起始部分与‘/’读取从文件)\n" #: src/lang.c:158 msgid "# pos_first_unread=ON/OFF\n" msgstr "# pos_first_unread=ON/OFF\n" #: src/lang.c:159 msgid "# post_8bit_header=ON/OFF\n" msgstr "# post_8 bit_header=ON/OFF\n" #: src/lang.c:160 msgid "# post_mime_encoding=supported_encoding" msgstr "# post_mime_encoding=支持的编码" #: src/lang.c:161 msgid "# post_process_type=NUM\n" msgstr "# post_process_type=数字\n" #: src/lang.c:162 msgid "# post_process_view=ON/OFF\n" msgstr "# post_process_view=ON/OFF\n" #: src/lang.c:163 #, fuzzy #| msgid "# quick_kill_scope=STRING (ie. talk.*)\n" msgid "# quick_kill_scope=STRING (e.g. talk.*)\n" msgstr "# quick_kill_scope=字串 (亦即 talk.*)\n" #: src/lang.c:164 msgid "# quick_kill_expire=ON/OFF\n" msgstr "# quick_kill_expire=ON/OFF\n" #: src/lang.c:165 msgid "# quick_kill_case=ON/OFF\n" msgstr "# quick_kill_case=ON/OFF\n" #: src/lang.c:166 msgid "# quick_kill_header=NUM\n" msgstr "# quick_kill_header=数字\n" #: src/lang.c:167 src/lang.c:176 msgid "# 0=Subject: (case sensitive) 1=Subject: (ignore case)\n" msgstr "# 0=Subject: (大小写相符) 1=Subject: (忽略大小写)\n" #: src/lang.c:168 src/lang.c:177 msgid "# 2=From: (case sensitive) 3=From: (ignore case)\n" msgstr "# 2=From: (大小写相符) 3=From: (忽略大小写)\n" #: src/lang.c:169 src/lang.c:178 msgid "# 4=Message-ID: & full References: line\n" msgstr "# 4=Message-ID: & 全部 References: 行\n" #: src/lang.c:170 src/lang.c:179 msgid "# 5=Message-ID: & last References: entry only\n" msgstr "# 5=只有 Message-ID: & 最后一笔 References: 条目\n" #: src/lang.c:171 src/lang.c:180 msgid "# 6=Message-ID: entry only 7=Lines:\n" msgstr "# 6=只有 Message-ID: 条目 7=Lines:\n" #: src/lang.c:172 msgid "# quick_select_scope=STRING\n" msgstr "# quick_select_scope=字串\n" #: src/lang.c:173 msgid "# quick_select_expire=ON/OFF\n" msgstr "# quick_select_expire=ON/OFF\n" #: src/lang.c:174 msgid "# quick_select_case=ON/OFF\n" msgstr "# quick_select_case=ON/OFF\n" #: src/lang.c:175 msgid "# quick_select_header=NUM\n" msgstr "# quick_select_header=数字\n" #: src/lang.c:181 #, fuzzy #| msgid "# quote_chars=STRING (%%s, %%S for initials)\n" msgid "# quote_chars=STRING (%I for initials)\n" msgstr "# quote_chars=字串 (%%s，%%S 用于缩写)\n" #: src/lang.c:183 msgid "# print_header=ON/OFF\n" msgstr "# print_header=ON/OFF\n" #: src/lang.c:185 msgid "# process_only_unread=ON/OFF\n" msgstr "# process_only_unread=ON/OFF\n" #: src/lang.c:186 msgid "# prompt_followupto=ON/OFF\n" msgstr "# prompt_followupto=ON/OFF\n" #: src/lang.c:187 msgid "# savedir=STRING (eg. ~user/News)\n" msgstr "# savedir=字串 (例如：~user/News)\n" #: src/lang.c:188 msgid "# savefile=STRING (eg. =linux)\n" msgstr "# savefile=字串 (例如：=linux)\n" #: src/lang.c:189 msgid "# sigfile=STRING (eg. $var/sig)\n" msgstr "# sigfile=字串 (例如：$var/sig)\n" #: src/lang.c:190 msgid "# show_author=NUM\n" msgstr "# show_author=数字\n" #: src/lang.c:191 msgid "# show_signatures=ON/OFF\n" msgstr "# show_signatures=ON/OFF\n" #: src/lang.c:192 #, fuzzy #| msgid "# show_signatures=ON/OFF\n" msgid "# show_art_score=ON/OFF\n" msgstr "# show_signatures=ON/OFF\n" #: src/lang.c:194 #, fuzzy #| msgid "# process_only_unread=ON/OFF\n" msgid "# suppress_soft_hyphens=ON/OFF\n" msgstr "# process_only_unread=ON/OFF\n" #: src/lang.c:196 msgid "# show_only_unread_arts=ON/OFF\n" msgstr "# show_only_unread_arts=ON/OFF\n" #: src/lang.c:197 msgid "# sigdashes=ON/OFF\n" msgstr "# sigdashes=ON/OFF\n" #: src/lang.c:198 msgid "# signature_repost=ON/OFF\n" msgstr "# signature_repost=ON/OFF\n" #: src/lang.c:199 msgid "# sort_article_type=NUM\n" msgstr "# sort_article_type=数字\n" #: src/lang.c:200 msgid "# sort_threads_type=NUM\n" msgstr "# sort_threads_type=数字\n" #: src/lang.c:201 msgid "# tex2iso_conv=ON/OFF\n" msgstr "# tex2iso_conv=ON/OFF\n" #: src/lang.c:202 msgid "# thread_catchup_on_exit=ON/OFF\n" msgstr "# thread_catchup_on_exit=ON/OFF\n" #: src/lang.c:203 msgid "# thread_articles=NUM" msgstr "# thread_articles=数字" #: src/lang.c:204 #, fuzzy #| msgid "# thread_format=STRING (eg. %%n %%m [%%L] %%T %%F)\n" msgid "# thread_format=STRING (eg. %n %m [%L] %T %F)\n" msgstr "# thread_format=字串 (例如：%%n %%m [%%L] %%T %%F)\n" #: src/lang.c:205 msgid "# thread_perc=NUM\n" msgstr "# thread_perc=数字\n" #: src/lang.c:206 msgid "# trim_article_body=NUM\n" msgstr "# trim_article_body=数字\n" #: src/lang.c:207 msgid "# 0 = Don't trim article body\n" msgstr "# 0 = 不修剪文章内文\n" #: src/lang.c:208 msgid "# 1 = Skip leading blank lines\n" msgstr "# 1 = 跳过前导空行\n" #: src/lang.c:209 msgid "# 2 = Skip trailing blank lines\n" msgstr "# 2 = 跳过尾随空行\n" #: src/lang.c:210 msgid "# 3 = Skip leading and trailing blank lines\n" msgstr "# 3 = 跳过前导和尾随空行\n" #: src/lang.c:211 msgid "# 4 = Compact multiple blank lines between text blocks\n" msgstr "# 4 = 压缩文本区块之间的多重空行\n" #: src/lang.c:212 msgid "" "# 5 = Compact multiple blank lines between text blocks and skip\n" "# leading blank lines\n" msgstr "" "# 5 = 压缩文本区块之间的多重空行并跳过\n" "# 前导空行\n" #: src/lang.c:213 msgid "" "# 6 = Compact multiple blank lines between text blocks and skip\n" "# trailing blank lines\n" msgstr "" "# 6 = 压缩文本区块之间的多重空行并跳过\n" "# 尾随空行\n" #: src/lang.c:214 msgid "" "# 7 = Compact multiple blank lines between text blocks and skip\n" "# leading and trailing blank lines\n" msgstr "" "# 7 = 压缩文本区块之间的多重空行并跳过\n" "# 前导和尾随空行\n" #: src/lang.c:215 msgid "# verbatim_handling=ON/OFF\n" msgstr "# verbatim_handling=ON/OFF\n" #: src/lang.c:217 #, fuzzy #| msgid "# verbatim_handling=ON/OFF\n" msgid "# extquote_handling=ON/OFF\n" msgstr "# verbatim_handling=ON/OFF\n" #: src/lang.c:219 msgid "# wrap_on_next_unread=ON/OFF\n" msgstr "# wrap_on_next_unread=ON/OFF\n" #: src/lang.c:220 msgid "# x_body=STRING (eg. ~/.tin/extra-body-text)\n" msgstr "# x_body=字串 (例如：~/.tin/extra-body-text)\n" #: src/lang.c:221 msgid "# x_comment_to=ON/OFF\n" msgstr "# x_comment_to=ON/OFF\n" #: src/lang.c:222 msgid "# x_headers=STRING (eg. ~/.tin/extra-headers)\n" msgstr "# x_headers=字串 (例如：~/.tin/extra-headers)\n" #: src/lang.c:223 msgid "" "#\n" "# Note that it is best to put general (global scoping)\n" msgstr "" "#\n" "# 要注意的是，最好是放到一般环境 (全局范围)\n" #: src/lang.c:224 msgid "" "# entries first followed by group specific entries.\n" "#\n" msgstr "" "# 条目先于群组特定的条目。\n" "#\n" #: src/lang.c:225 msgid "############################################################################\n" msgstr "############################################################################\n" #: src/lang.c:226 msgid "Attributes Menu Commands" msgstr "属性功能表指令" #: src/lang.c:227 #, c-format msgid "attribute with no scope: %s" msgstr "属性不具任何范围：%s" #: src/lang.c:229 #, c-format msgid "%d Authentication failed" msgstr "%d 认证失败" #: src/lang.c:230 #, c-format msgid "NNTP authorization password not found for %s" msgstr "找不到用于 %s 的 NNTP 授权密码" #: src/lang.c:231 msgid "Server expects authentication.\n" msgstr "服务器预期需要认证。\n" #: src/lang.c:232 msgid " Please enter password: " msgstr " 请输入密码：" #: src/lang.c:233 msgid " Please enter username: " msgstr " 请输入用户名：" #: src/lang.c:234 #, c-format msgid "Authorized for user: %s\n" msgstr "用户获得授权：%s\n" #: src/lang.c:235 #, c-format msgid "Authorization failed for user: %s\n" msgstr "用户授权失败：%s\n" #: src/lang.c:236 msgid "No supported authorization method available in current state!\n" msgstr "" #: src/lang.c:238 #, c-format msgid "Author search backwards [%s]> " msgstr "向后搜索作者 [%s]>" #: src/lang.c:239 #, c-format msgid "Author search forwards [%s]> " msgstr "向前搜索作者 [%s]>" #: src/lang.c:240 #, c-format msgid "" "\n" "Autosubscribed to %s" msgstr "" "\n" "自动订阅 %s" #: src/lang.c:241 msgid "Autosubscribing groups...\n" msgstr "自动订阅群组…\n" #: src/lang.c:242 #, c-format msgid "Autoselecting articles (use '%s' to see all unread) ..." msgstr "自动选取文章 (使用‘%s’以看到所有未读)…" #: src/lang.c:244 #, c-format msgid "Article to be posted resulted in errors/warnings. %s=quit, %s=Menu, %s=edit: " msgstr "要张贴的文章导致错误/警告。%s=离开，%s=菜单，%s=编辑：" #: src/lang.c:246 #, c-format msgid "Unrecognized attribute: %s" msgstr "无法辨识的属性：%s" #: src/lang.c:248 #, c-format msgid "Bad command. Type '%s' for help." msgstr "不当的命令。输入‘%s’以获得说明。" #: src/lang.c:249 msgid "Base article" msgstr "基底文章" #: src/lang.c:250 msgid "Base article range" msgstr "基底文章范围" #: src/lang.c:251 #, fuzzy, c-format #| msgid "%s: Updating of index files not supported\n" msgid "%s: Updating of index files not supported: cache_overview_files=%s" msgstr "%s：不支持索引文件的更新\n" #: src/lang.c:252 msgid "*** Beginning of article ***" msgstr "*** 文章开头 ***" #: src/lang.c:253 msgid "*** Beginning of page ***" msgstr "*** 页面开头 ***" #: src/lang.c:255 #, c-format msgid "Cancel (delete) or supersede (overwrite) article [%%s]? (%s/%s/%s): " msgstr "取消 (删除) 或取代 (覆写) 文章 [%%s]？(%s/%s/%s)：" #: src/lang.c:256 msgid "Cancelling article..." msgstr "取消文章…" #: src/lang.c:258 #, c-format msgid "Cannot create %s" msgstr "无法创建 %s" #: src/lang.c:261 #, c-format msgid "Can't find base article %d" msgstr "找不到基底文章 %d" #: src/lang.c:263 #, c-format msgid "Can't open %s" msgstr "无法打开 %s" #: src/lang.c:264 #, c-format msgid "Couldn't open %s for saving" msgstr "无法打开 %s 以保存" #: src/lang.c:265 msgid "*** Posting not allowed ***" msgstr "*** 不允许张贴 ***" #: src/lang.c:266 #, c-format msgid "Posting is not allowed to %s" msgstr "不允许张贴到 %s" #: src/lang.c:268 #, c-format msgid "Can't retrieve %s" msgstr "无法取回 %s" #: src/lang.c:270 msgid "Can't supersede in mailgroups, try repost instead." msgstr "" #: src/lang.c:271 #, c-format msgid "%s is a directory" msgstr "%s 是个目录" #: src/lang.c:272 msgid "Catchup" msgstr "设回未读" #: src/lang.c:273 #, c-format msgid "Catchup %s..." msgstr "设回未读 %s…" #: src/lang.c:274 msgid "Catchup all groups entered during this session?" msgstr "将所有在这个作业阶段期间内进入的群组设回未读？" #: src/lang.c:275 msgid "You have tagged articles in this group - catchup anyway?" msgstr "您已在这个群组中标记文章 - 还是要设回未读？" #: src/lang.c:276 #, c-format msgid "%s %d %s in %lu seconds\n" msgstr "%s %d %s 于 %lu 秒完成\n" #: src/lang.c:277 msgid "Caughtup" msgstr "已设回未读" #: src/lang.c:278 msgid "Check Prepared Article" msgstr "检查备妥的文章" #: src/lang.c:279 msgid "Checking for new groups... " msgstr "检查看看新群组…" #: src/lang.c:280 #, fuzzy #| msgid "Checking for news..." msgid "Checking for news...\n" msgstr "检查看看新闻…" #: src/lang.c:281 #, c-format msgid "Post-process %s=no, %s=yes, %s=shar, %s=quit: " msgstr "后置处理 %s=否，%s=是，%s=shar，%s=离开：" #: src/lang.c:283 msgid "ANSI color disabled" msgstr "ANSI 颜色已停用" #: src/lang.c:284 msgid "ANSI color enabled" msgstr "ANSI 颜色已启用" #: src/lang.c:286 #, c-format msgid "Command failed: %s" msgstr "命令失败：%s" #: src/lang.c:288 msgid "Mark not selected articles read?" msgstr "标记未选文章为已读？" #: src/lang.c:289 #, fuzzy #| msgid "" #| "\n" #| "Connection to %s: " msgid "Connection Info" msgstr "" "\n" "连接到 %s：" #: src/lang.c:290 msgid "Reading from local spool.\n" msgstr "" #: src/lang.c:291 #, fuzzy #| msgid "Reading %sarticles..." msgid "Reading saved news.\n" msgstr "读取 %s 篇文章…" #: src/lang.c:292 #, fuzzy #| msgid "" #| "Attribute operations\n" #| "--------------------" msgid "" "\n" "Configuration files:\n" "--------------------\n" msgstr "" "属性操作\n" "--------------------" #: src/lang.c:300 #, fuzzy #| msgid "" #| "Display properties\n" #| "------------------" msgid "" "\n" "Local spool config:\n" "-------------------\n" msgstr "" "显示属性\n" "------------------" #: src/lang.c:305 msgid "COMPRESS :" msgstr "" #: src/lang.c:306 #, fuzzy #| msgid "" #| "Option operations\n" #| "-----------------" msgid "" "\n" "Connection details:\n" "-------------------\n" msgstr "" "选项操作\n" "-----------------" #: src/lang.c:308 #, c-format msgid " DEFLATE %s\n" msgstr "" #: src/lang.c:309 msgid "(enabled)" msgstr "" #: src/lang.c:310 msgid "(inactive)" msgstr "" #: src/lang.c:312 msgid " DEFLATE (not supported)\n" msgstr "" #: src/lang.c:315 msgid "(disabled)" msgstr "" #: src/lang.c:316 #, c-format msgid "NNTP TIMEOUT : %d seconds %s\n" msgstr "" #: src/lang.c:318 #, c-format msgid "IMPLEMENTATION: %s\n" msgstr "" #: src/lang.c:320 #, c-format msgid "MAXARTNUM : %s\n" msgstr "" #: src/lang.c:322 #, fuzzy, c-format #| msgid "Read (%s)\n" msgid "Reading via NNTP (%s).\n" msgstr "已读 (%s)\n" #: src/lang.c:323 #, c-format msgid "NNTPPORT : %u\n" msgstr "" #: src/lang.c:324 #, fuzzy #| msgid "unread " msgid "read only" msgstr "未读 " #: src/lang.c:325 msgid "read/write" msgstr "" #: src/lang.c:326 #, c-format msgid "NNTPSERVER : %s\n" msgstr "" #: src/lang.c:327 #, c-format msgid "CONNECTIONTYPE: %s\n" msgstr "" #: src/lang.c:329 #, c-format msgid "Reading %s via NNTPS (%s; " msgstr "" #: src/lang.c:330 #, c-format msgid "Certificate #%d\n" msgstr "" #: src/lang.c:332 #, c-format msgid "Issuer : %s\n" msgstr "" #: src/lang.c:333 #, fuzzy #| msgid "" #| "Group/thread/article operations\n" #| "-------------------------------" msgid "" "\n" "Server certificate information:\n" "-------------------------------\n" msgstr "" "群组/讨论串/文章操作\n" "-------------------------------" #: src/lang.c:334 #, fuzzy, c-format #| msgid "Subject" msgid "Subject: %s\n" msgstr "主旨" #: src/lang.c:335 #, fuzzy #| msgid "" #| "Scope operations\n" #| "----------------" msgid "" "\n" "TLS information:\n" "----------------\n" msgstr "" "范围操作\n" "----------------" #: src/lang.c:336 msgid "trusted" msgstr "" #: src/lang.c:337 msgid "untrusted" msgstr "" #: src/lang.c:339 msgid "UNEXPECTED, possible BUG" msgstr "" #: src/lang.c:340 msgid "tolerated as \"-k\" (insecure) requested" msgstr "" #: src/lang.c:341 #, c-format msgid "" "Server certificate verification FAILED:\n" "\t%s (%s)\n" msgstr "" #: src/lang.c:342 #, fuzzy #| msgid "newsrc file saved successfully.\n" msgid "Server certificate verified successfully.\n" msgstr "newsrc 文件已成功保存。\n" #: src/lang.c:346 msgid "Server certificate verification FAILED: \n" msgstr "" #: src/lang.c:350 #, c-format msgid "%s %s (strength %d)\n" msgstr "" #: src/lang.c:357 #, fuzzy, c-format #| msgid "screen is too small, %s is exiting\n" msgid "Cook article failed, %s is exiting" msgstr "屏幕太小，%s 正在离开\n" #: src/lang.c:358 msgid "" msgstr "" #: src/lang.c:359 msgid "Creating active file for saved groups...\n" msgstr "为已存群组创建现用文件…\n" #: src/lang.c:360 #, fuzzy, c-format #| msgid "Creating newsrc file...\n" msgid "Creating %s file...\n" msgstr "创建 newsrc 文件…\n" #: src/lang.c:362 src/lang.c:1715 src/lang.c:1735 msgid "Default" msgstr "缺省" #: src/lang.c:363 msgid "Delete saved files that have been post processed?" msgstr "删除经过后置处理的已存文件？" #: src/lang.c:364 msgid "Deleting temporary files..." msgstr "删除暂存文件…" #: src/lang.c:366 msgid "*** End of article ***" msgstr "*** 文章结束 ***" #: src/lang.c:367 msgid "*** End of articles ***" msgstr "*** 文章结束 ***" #: src/lang.c:368 msgid "*** End of attachments ***" msgstr "*** 附件结束 ***" #: src/lang.c:369 msgid "*** End of groups ***" msgstr "*** 群组结束 ***" #: src/lang.c:370 msgid "*** End of page ***" msgstr "*** 页面结束 ***" #: src/lang.c:371 #, fuzzy #| msgid "*** End of articles ***" msgid "*** End of posted articles ***" msgstr "*** 文章结束 ***" #: src/lang.c:372 msgid "*** End of scopes ***" msgstr "*** 范围结束 ***" #: src/lang.c:373 msgid "*** End of thread ***" msgstr "*** 讨论串结束 ***" #: src/lang.c:374 msgid "*** End of URLs ***" msgstr "*** 网址结束 ***" #: src/lang.c:375 msgid "Enter limit of articles to get> " msgstr "输入提取文章的限制>" #: src/lang.c:376 msgid "Enter Message-ID to go to> " msgstr "输入要前往的消息识别号>" #: src/lang.c:377 msgid " and enter next unread thread" msgstr " 并进入下一个未读的讨论串" #: src/lang.c:378 msgid " and enter next unread article" msgstr " 并进入下一篇未读的文章" #: src/lang.c:379 msgid " and enter next unread group" msgstr " 并进入下一个未读的群组" #: src/lang.c:380 msgid "Enter option number> " msgstr "输入选项数字>" #: src/lang.c:381 #, c-format msgid "Enter range [%s]> " msgstr "输入范围 [%s]>" #: src/lang.c:382 #, fuzzy, c-format #| msgid "Error: rename %s to %s" msgid "Error: Could not appended %s to %s" msgstr "错误：重命名 %s 为 %s" #: src/lang.c:383 msgid "" "\n" "Warning: Approved: header used.\n" msgstr "" "\n" "警告：已使用 Approved: 标头。\n" #: src/lang.c:384 #, c-format msgid " Line %d: \"%s\": given string too long.\n" msgstr "" #: src/lang.c:385 #, fuzzy, c-format #| msgid "Unrecognized attribute: %s" msgid " Line %d: \"%s\": unrecognized attribute.\n" msgstr "无法辨识的属性：%s" #: src/lang.c:386 #, c-format msgid " Line %d: \"%s\": malformed line, '=' missing.\n" msgstr "" #: src/lang.c:390 #, fuzzy, c-format #| msgid "" #| "\n" #| "Error: Bad address in To: header.\n" msgid "" "\n" "Error: Bad address in \"%s\" header.\n" msgstr "" "\n" "错误：不当的地址在 From: 标头内。\n" #: src/lang.c:391 msgid "" "\n" "Error: Bad FQDN in Message-ID: header.\n" msgstr "" "\n" "错误：不当的 FQDN 于 Message-ID: 标头。\n" #: src/lang.c:393 #, c-format msgid "Can't use literal IPv%d-address %s with TLS (-T)" msgstr "" #: src/lang.c:396 #, c-format msgid "Can't unlock %s" msgstr "无法解除锁定 %s" #: src/lang.c:397 #, c-format msgid "Couldn't dotlock %s - article not appended!" msgstr "无法点锁 %s - 文章未附加！" #: src/lang.c:398 #, c-format msgid "Couldn't lock %s - article not appended!" msgstr "无法锁定 %s - 文章未附加！" #: src/lang.c:401 #, c-format msgid "" "Server requires authentication but compression (-C) is already active.\n" "Restart %s with -A cmd.-line switch in conjunction with -C.\n" msgstr "" #: src/lang.c:404 #, c-format msgid "Corrupted file %s" msgstr "已损坏文件 %s" #: src/lang.c:406 #, c-format msgid "couldn't expand %s\n" msgstr "无法展开 %s\n" #: src/lang.c:408 #, c-format msgid "Error: Custom format empty. Using default \"%s\"." msgstr "" #: src/lang.c:409 #, fuzzy #| msgid "" #| "\n" #| "Error: The \"%s:\" line is empty.\n" msgid "" "\n" "Error: Article is empty.\n" msgstr "" "\n" "错误：“%s:”这行是空的。\n" #: src/lang.c:411 msgid "" "\n" "Error: Followup-To \"poster\" and a newsgroup is not allowed!\n" msgstr "" "\n" "错误：不允许跟贴“poster”和新闻群组！\n" #: src/lang.c:412 #, c-format msgid "Error: Custom format exceeds screen width. Using default \"%s\"." msgstr "" #: src/lang.c:413 msgid "Internal error in GNKSA routine - send bug report.\n" msgstr "GNKSA 例程中发生内部错误 - 发送错误报告。\n" #: src/lang.c:414 msgid "Left angle bracket missing in route address.\n" msgstr "在路由地址中缺少左角括号。\n" #: src/lang.c:415 msgid "Left parenthesis missing in old-style address.\n" msgstr "在旧式地址中缺少左括号。\n" #: src/lang.c:416 msgid "Right parenthesis missing in old-style address.\n" msgstr "在旧式地址中缺少右括号。\n" #: src/lang.c:417 msgid "At-sign missing in mail address.\n" msgstr "在邮件地址中缺少 @ 符号。\n" #: src/lang.c:418 #, fuzzy #| msgid "Left angle bracket missing in route address.\n" msgid "Right angle bracket missing in route address.\n" msgstr "在路由地址中缺少左角括号。\n" #: src/lang.c:419 msgid "Single component FQDN is not allowed. Add your domain.\n" msgstr "不允许单一组成 FQDN。请加入您的域名。\n" #: src/lang.c:420 msgid "" "Invalid domain. Send bug report if your top level domain really exists.\n" "Use .invalid as top level domain for munged addresses.\n" msgstr "" "无效的域名。如果您的顶层域名真的存在，请发送错误报告。\n" "使用 .invalid 作为伪装地址的顶层域名。\n" #: src/lang.c:421 msgid "" "Illegal domain. Send bug report if your top level domain really exists.\n" "Use .invalid as top level domain for munged addresses.\n" msgstr "" "不合法的域名。如果您的顶层域名真的存在，请发送错误报告。\n" "使用 .invalid 作为伪装地址的顶层域名。\n" #: src/lang.c:422 msgid "" "Unknown domain. Send bug report if your top level domain really exists.\n" "Use .invalid as top level domain for munged addresses.\n" msgstr "" "不明域名。如果您的顶层域名真的存在，请发送错误报告。\n" "使用 .invalid 作为伪装地址的顶层域名。\n" #: src/lang.c:423 msgid "Illegal character in FQDN.\n" msgstr "FQDN 中有不合法的字符。\n" #: src/lang.c:424 msgid "Zero length FQDN component not allowed.\n" msgstr "不允许零长度的 FQDN 组成。\n" #: src/lang.c:425 msgid "FQDN component exceeds maximum allowed length (63 chars).\n" msgstr "FQDN 组成超出允许的最大长度 (63 个字符)。\n" #: src/lang.c:426 msgid "FQDN component may not start or end with hyphen.\n" msgstr "FQDN 组成不可以连字号起始或结束。\n" #: src/lang.c:427 msgid "FQDN component may not start with digit.\n" msgstr "FQDN 组成不可以数字起始。\n" #: src/lang.c:428 msgid "Domain literal has impossible numeric value.\n" msgstr "域名字面量具有不可能的数值。\n" #: src/lang.c:429 msgid "Domain literal is for private use only and not allowed for global use.\n" msgstr "域名字面量只限私人使用而不允许全局使用。\n" #: src/lang.c:430 msgid "Right bracket missing in domain literal.\n" msgstr "域名字面量中缺少右中括号。\n" #: src/lang.c:431 msgid "Missing localpart of mail address.\n" msgstr "缺少邮件地址的本地部分。\n" #: src/lang.c:432 msgid "Illegal character in localpart of mail address.\n" msgstr "邮件地址的本地部分有不合法的字符。\n" #: src/lang.c:433 msgid "Zero length localpart component not allowed.\n" msgstr "不允许零长度的本地部分组成。\n" #: src/lang.c:434 msgid "" "Illegal character in realname.\n" "Unquoted words may not contain '!()<>@,;:\\.[]' in route addresses.\n" msgstr "" "真实名称中有不合法的字符。\n" "路由地址中的引言结束字词不可以包含‘!()<>@,;:\\.[]’。\n" #: src/lang.c:435 msgid "" "Illegal character in realname.\n" "Quoted words may not contain '()<>\\'.\n" msgstr "" "真实名称中有不合法的字符。\n" "引言字词不可以包含‘()<>\\’。\n" #: src/lang.c:436 msgid "" "Illegal character in realname.\n" "Encoded words may not contain '!()<>@,;:\"\\.[]/=' in parameter.\n" msgstr "" "真实名称中有不合法的字符。\n" "编码字词在参数中不可以包含‘!()<>@,;:\"\\.[]/=’。\n" #: src/lang.c:437 msgid "Bad syntax in encoded word used in realname.\n" msgstr "用于真实名称的编码字词中有不当的语法。\n" #: src/lang.c:438 msgid "" "Illegal character in realname.\n" "Unquoted words may not contain '()<>\\' in old-style addresses.\n" msgstr "" "真实名称中有不合法的字符。\n" "引言结束字词在旧式地址中不可以包含‘()<>\\’。\n" #: src/lang.c:439 msgid "" "Illegal character in realname.\n" "Control characters and unencoded 8bit characters > 127 are not allowed.\n" msgstr "" "真实名称中有不合法的字符。\n" "控制字符和未编码 8 比特字符不允许 > 127。\n" #: src/lang.c:440 #, fuzzy #| msgid "Missing parts." msgid "Missing realname.\n" msgstr "缺少部分。" #: src/lang.c:441 msgid "" "\n" "Error: No blank line found after header.\n" msgstr "" "\n" "错误：标头之后找不到任何空行。\n" #: src/lang.c:442 #, fuzzy #| msgid "" #| "\n" #| "Error: Illegal formatted %s.\n" msgid "" "\n" "Error: Illegal Distribution \"all\" used.\n" msgstr "" "\n" "错误：不合法的格式 %s。\n" #: src/lang.c:443 #, c-format msgid "" "\n" "Error: Illegal formatted %s.\n" msgstr "" "\n" "错误：不合法的格式 %s。\n" #. TODO: fixme, US-ASCII is not the only 7bit charset we know about #: src/lang.c:445 msgid "" "\n" "Error: Posting contains non-ASCII characters but MM_CHARSET is set to\n" " US-ASCII - please change this setting to a suitable value for\n" " your language using the M)enu of configurable options or by\n" " editing tinrc.\n" msgstr "" "\n" "错误：张贴中含有非 ASCII 字符，但是 MM_CHARSET 已设置为\n" " US-ASCII - 请使用可组配选项的 M)菜单 或者经由编辑\n" " tinrc 来变更这个设置为适合您的语言的值。\n" #: src/lang.c:450 msgid "" "\n" "Error: Posting contains non-ASCII characters but the MIME encoding\n" " for news messages is set to \"7bit\" - please change this\n" " setting to \"8bit\" or \"quoted-printable\" depending on what\n" " is more common in your part of the world. This can be done\n" " using the M)enu of configurable options or by editing tinrc.\n" msgstr "" "\n" "错误：张贴中含有非 ASCII 字符，但是新闻消息的 MIME 编码却\n" " 是设置为“7 比特” - 请依据您所在的环境中最常见的\n" " 情况来变更这个设置为“8 比特”或是“quoted-printable”。\n" " 这可以利用可组配选项的 M)菜单 或是经由编辑 tinrc 来\n" " 达成。\n" #: src/lang.c:456 msgid "" "\n" "Error: Article starts with blank line instead of header\n" msgstr "" "\n" "错误：文章以空行起始而非标头\n" #: src/lang.c:457 #, c-format msgid "" "\n" "Error: Header on line %d does not have a colon after the header name:\n" "%s\n" msgstr "" "\n" "错误：第 %d 行的标头于标头名称之后没有冒号：\n" "%s\n" #: src/lang.c:458 #, c-format msgid "" "\n" "Error: The \"%s:\" line is empty.\n" msgstr "" "\n" "错误：“%s:”这行是空的。\n" #: src/lang.c:459 #, c-format msgid "" "\n" "Error: The \"%s:\" line is missing from the article header.\n" msgstr "" "\n" "错误：“%s:”文章标头缺少这行。\n" #: src/lang.c:460 #, c-format msgid "" "\n" "Error: %s contains non 7bit chars.\n" msgstr "" "\n" "错误：%s 含有非 7 比特字符。\n" #: src/lang.c:461 #, c-format msgid "" "\n" "Error: Header on line %d does not have a space after the colon:\n" "%s\n" msgstr "" "\n" "错误：第 %d 行的标头于冒号之后没有空格：\n" "%s\n" #: src/lang.c:462 #, c-format msgid "" "\n" "Error: There are multiple (%d) \"%s:\" lines in the header.\n" msgstr "" "\n" "错误：在标头中出现多重的 (%d)“%s:”行。\n" #: src/lang.c:463 #, fuzzy, c-format #| msgid "" #| "\n" #| "Error: Header on line %d does not have a space after the colon:\n" #| "%s\n" msgid "" "\n" "Error: Header on line %d has no name:\n" "%s\n" msgstr "" "\n" "错误：第 %d 行的标头于冒号之后没有空格：\n" "%s\n" #: src/lang.c:464 msgid "" "\n" "Error: This is a mailgroup, but a recipient (\"To:\") is missing.\n" msgstr "" #: src/lang.c:465 #, c-format msgid "Mixed up '-f'/'-F'? %s %s" msgstr "" #: src/lang.c:467 #, c-format msgid "Insecure permissions of %s (%o)" msgstr "%s (%o) 的不安全权限" #: src/lang.c:470 #, fuzzy, c-format #| msgid "" #| "Line %d is longer than 998 octets and should be folded, but\n" #| "encoding is not set to %s\n" msgid "Line %d is longer than %d octets and should be folded.\n" msgstr "" "第 %d 行长度超过 998 字节而，但是\n" "编码未被设置为 %s\n" #: src/lang.c:472 #, fuzzy, c-format #| msgid "" #| "Line %d is longer than 998 octets and should be folded, but\n" #| "encoding is not set to %s\n" msgid "Line %d is longer than %d octets and should be shortened.\n" msgstr "" "第 %d 行长度超过 998 字节而，但是\n" "编码未被设置为 %s\n" #: src/lang.c:477 #, fuzzy, c-format #| msgid "MIME parse error: Unexpected end of %s/%s article" msgid "MIME parse error: Unexpected end of %s/%s article\n" msgstr "MIME 剖析错误：未预期的 %s/%s 文章结束" #: src/lang.c:478 #, fuzzy #| msgid "MIME parse error: Start boundary whilst reading headers" msgid "MIME parse error: Start boundary whilst reading headers\n" msgstr "MIME 剖析错误：读取标头时出现起始边界" #: src/lang.c:479 msgid "" "\n" "Error: \"poster\" is not allowed in Newsgroups!\n" msgstr "" "\n" "错误：在新闻群组中不允许“poster”！\n" #: src/lang.c:480 msgid "Can't get a (fully-qualified) domain-name!" msgstr "无法提取 (完全合格的) 域名名称！" #: src/lang.c:482 msgid "" "\n" "Error: From: line missing.\n" msgstr "" "\n" "错误： From: 行缺失。\n" #: src/lang.c:485 #, c-format msgid "No permissions to go into %s\n" msgstr "没有权限可进入 %s\n" #: src/lang.c:486 #, c-format msgid "No read permissions for %s\n" msgstr "没有 %s 的读取权限\n" #: src/lang.c:487 #, c-format msgid "File %s does not exist\n" msgstr "文件 %s 不存在\n" #: src/lang.c:488 #, c-format msgid "No write permissions for %s\n" msgstr "没有 %s 的写入权限\n" #: src/lang.c:490 #, fuzzy, c-format #| msgid "No mail address" msgid "Not a literal IPv6 address: %s" msgstr "没有邮件地址" #: src/lang.c:493 msgid "Can't get user information (/etc/passwd missing?)" msgstr "无法提取用户信息 (缺少 /etc/passwd ?)" #: src/lang.c:495 msgid "errors" msgstr "错误" #: src/lang.c:496 msgid "error" msgstr "错误" #: src/lang.c:499 #, c-format msgid "" "\n" "Error on line %d: \"Sender:\" header not allowed (it will be added for you)\n" msgstr "" "\n" "错误于第 %d 行：“Sender:”标头不被允许 (将会为您加入)\n" #: src/lang.c:501 #, c-format msgid "Server has non of the groups listed in %s" msgstr "服务器不具任何一个列在 %s 中的群组" #: src/lang.c:502 #, c-format msgid "Error: unlink %s" msgstr "" #: src/lang.c:503 msgid "Unknown display level" msgstr "不明的显示层级" #: src/lang.c:505 msgid "Unreachable?\n" msgstr "无法连接？\n" #: src/lang.c:507 msgid "" msgstr "" #: src/lang.c:508 msgid "Exiting..." msgstr "正在离开…" #: src/lang.c:509 msgid "leaving external mail-reader" msgstr "离开外部邮件阅读器" #: src/lang.c:510 #, c-format msgid "Extracting %s..." msgstr "正在截取 %s…" #: src/lang.c:512 #, c-format msgid "Error writing %s file. Filesystem full? File reset to previous state." msgstr "写入 %s 文件时发生错误。文件系统已满？文件重置到上一个状态。" #: src/lang.c:513 #, c-format msgid "Error making backup of %s file. Filesystem full?" msgstr "制作文件 %s 备份时发生错误。文件系统已满？" #: src/lang.c:514 #, fuzzy, c-format #| msgid "Filtering global rules (%d/%d)..." msgid "Filtering global rules (%d/%d) ('q' to quit)..." msgstr "筛选全局规则 (%d/%d)…" #: src/lang.c:515 msgid "Rule created by: " msgstr "规则创建者为：" #: src/lang.c:516 #, fuzzy #| msgid "" #| "# Format:\n" #| "# comment=STRING Optional. Multiple lines allowed. Comments must be placed\n" #| "# at the beginning of a rule, or they will be moved to the\n" #| "# next rule. '#' is not a valid keyword for a comment!\n" #| "# group=STRING Mandatory. Newsgroups list (e.g. comp.*,!*sources*).\n" #| "# case=NUM Mandatory. Compare=0 / ignore=1 case when filtering.\n" #| "# score=NUM|STRING Mandatory. Score to give. Either:\n" #| "# score=NUM A number (e.g. 70). Or:\n" #| "# score=STRING One of the two keywords: 'hot' or 'kill'.\n" #| "# subj=STRING Optional. Subject: line (e.g. How to be a wizard).\n" #| "# from=STRING Optional. From: line (e.g. *Craig Shergold*).\n" #| "# msgid=STRING Optional. Message-ID: line (e.g. <123@ether.net>) with\n" #| "# full references.\n" #| "# msgid_last=STRING Optional. Like above, but with last reference only.\n" #| "# msgid_only=STRING Optional. Like above, but without references.\n" #| "# refs_only=STRING Optional. References: line (e.g. <123@ether.net>) without\n" #| "# Message-ID:\n" #| "# lines=[<>]?NUM Optional. Lines: line. '<' or '>' are optional.\n" #| "# gnksa=[<>]?NUM Optional. GNKSA parse_from() return code. '<' or '>' opt.\n" #| "# xref=PATTERN Optional. Kill pattern (e.g. alt.flame*)\n" #| "# time=NUM Optional. time_t value when rule expires\n" #| "#\n" msgid "" "# Format:\n" "# comment=STRING Optional. Multiple lines allowed. Comments must be placed\n" "# at the beginning of a rule, or they will be moved to the\n" "# next rule. '#' is not a valid keyword for a comment!\n" "# group=STRING Mandatory. Newsgroups list (e.g. comp.*,!*sources*).\n" "# case=NUM Mandatory. Compare=0 / ignore=1 case when filtering.\n" "# score=NUM|STRING Mandatory. Score to give. Either:\n" "# score=NUM A number (e.g. 70). Or:\n" "# score=STRING One of the two keywords: 'hot' or 'kill'.\n" "# subj=STRING Optional. Subject: line (e.g. How to be a wizard).\n" "# from=STRING Optional. From: line (e.g. *Craig Shergold*).\n" "# msgid=STRING Optional. Message-ID: line (e.g. <123@example.net>) with\n" "# full references.\n" "# msgid_last=STRING Optional. Like above, but with last reference only.\n" "# msgid_only=STRING Optional. Like above, but without references.\n" "# refs_only=STRING Optional. References: line (e.g. <123@example.net>) without\n" "# Message-ID:\n" "# lines=[<>]?NUM Optional. Lines: line. '<' or '>' are optional.\n" "# gnksa=[<>]?NUM Optional. GNKSA parse_from() return code. '<' or '>' opt.\n" "# xref=PATTERN Optional. Kill pattern (e.g. alt.flame*)\n" "# path=PATTERN Optional. Kill pattern (e.g. news.example.org)\n" "# Be aware that filtering on Path: may significantly slow\n" "# down the process.\n" "# time=NUM Optional. time_t value when rule expires\n" "#\n" msgstr "" "# 格式：\n" "# comment=字串 可选。允许多行。评论必须被置放于规则的起始部分，否则将被\n" "# 移到下一规则。'#' 并非可用于评论的有效关键字！\n" "# group=字串 必要。新闻群组清单(例如：comp.*,!*sources*)。\n" "# case=数字 必要。比较=0 / 忽略=1 大小写于筛选时\n" "# score=数字|字串 必要。给出的分数。若非：\n" "# score=数字 一个数字 (例如：70)，就是：\n" "# score=字串 两个关键字之一：'hot' 或 'kill'。\n" "# subj=字串 可选。 Subject: 行 (例如：如何作为一个精灵)。\n" "# from=字串 可选。 From: 行 (例如：*Craig Shergold*)。\n" "# msgid=字串 可选。 Message-ID: 行 (例如：<123@ether.net>) 附带\n" "# 完整的参照。\n" "# msgid_last=字串 可选。如上，但是只附最后一次参照。\n" "# msgid_only=字串 可选。如上，但是不附参照。\n" "# refs_only=字串 可选。参照：行 (例如：<123@ether.net>) 不附 Message-ID: \n" "# lines=[<>]?数字 可选。行：行。 '<' 或 '>' 为可选的。\n" "# gnksa=[<>]?数字 可选。GNKSA parse_from() 返回值。 '<' 或 '>' 为可选的。\n" "# xref=模式 可选。砍除模式 (例如：alt.flame*)\n" "# time=数字 可选。time_t 值表示规则过期的时间\n" "#\n" #: src/lang.c:542 #, c-format msgid "Enter score for rule (default=%d): " msgstr "输入规则的分数 (缺省=%d)：" #: src/lang.c:543 #, c-format msgid "Enter the score weight (range 0 < score <= %d)" msgstr "输入分数的权重 (范围 0 < 分数 <= %d)" #. SCORE_MAX #: src/lang.c:544 msgid "Full" msgstr "全部" #: src/lang.c:545 msgid "Comment (optional) : " msgstr "评论 (可选的) ：" #: src/lang.c:547 msgid "Malformed overview entry: servername missing." msgstr "" #: src/lang.c:548 #, c-format msgid "\t Xref: %s" msgstr "" #: src/lang.c:549 msgid "Skipping Xref filter" msgstr "" #: src/lang.c:551 msgid "Apply pattern to : " msgstr "套用模式到 ：" #: src/lang.c:552 #, c-format msgid "Enter pattern [%s]> " msgstr "输入模式 [%s]>" #: src/lang.c:553 #, c-format msgid "" "\n" "You requested followups to your article to go to the following %s:\n" msgstr "" "\n" "您所要求对于您文章的跟贴为下列 %s：\n" #: src/lang.c:554 #, c-format msgid " %s\t Answers will be directed to you by mail.\n" msgstr " %s\t 回复将会直接经由邮件寄给您。\n" #: src/lang.c:555 msgid "-- forwarded message --\n" msgstr "-- 已转发消息 --\n" #: src/lang.c:556 msgid "-- end of forwarded message --\n" msgstr "-- 已转发消息结束 --\n" #: src/lang.c:557 msgid "From: line (ignore case) " msgstr "From: 行 (忽略大小写) " #: src/lang.c:558 msgid "From: line (case sensitive) " msgstr "From: 行 (大小写相符) " #: src/lang.c:561 #, c-format msgid "%s%s: Unknown host.\n" msgstr "%s%s：不明的主机。\n" #: src/lang.c:563 msgid "global " msgstr "全局 " #: src/lang.c:564 #, c-format msgid "Please use %.100s instead" msgstr "请使用 %.100s 作为替代" #: src/lang.c:565 #, c-format msgid "%s is bogus" msgstr "%s 是假造的" #: src/lang.c:566 #, c-format msgid "Group %s is moderated. Continue?" msgstr "群组 %s 有人主持。要继续？" #: src/lang.c:567 msgid "groups" msgstr "群组" #: src/lang.c:568 #, c-format msgid "Rereading %s..." msgstr "重新读取 %s…" #: src/lang.c:569 msgid "Top Level Commands" msgstr "顶层命令" #: src/lang.c:570 msgid "Group Selection" msgstr "群组选择" #: src/lang.c:571 msgid "group" msgstr "群组" #: src/lang.c:572 msgid "*** Group descriptions are disabled according to current select_format ***" msgstr "" #: src/lang.c:574 msgid "One or more lines of comment. to add a line or proceed if line is empty." msgstr "一或多行的评论。 以加入一行或是如果空行则继续。" #: src/lang.c:575 msgid "From: line to add to filter file. toggles & sets." msgstr "From: 要加入筛选器文件的列。 切换 & 设置。" #: src/lang.c:576 msgid "Linecount of articles to be filtered. < for less, > for more, = for equal." msgstr "要筛选的文章行数。< 表示较少，> 表示更多，= 表示相等。" #: src/lang.c:577 msgid "Message-ID: line to add to filter file. toggles & sets." msgstr "Message-ID: 要加入筛选器文件的列。 切换 & 设置。" #: src/lang.c:578 msgid "Subject: line to add to filter file. toggles & sets." msgstr "Subject: 要加入筛选器文件的列。 切换 & 设置。" #: src/lang.c:579 msgid "Enter text pattern to filter if Subject: & From: lines are not what you want." msgstr "如果 Subject: & From: 各列不是您想要的，就输入文本模式到筛选器。" #: src/lang.c:580 msgid "Select where text pattern should be applied. toggles & sets." msgstr "选取应该套用文本模式的地方。 切换 & 设置。" #: src/lang.c:581 msgid "Expiration time in days for the entered filter. toggles & sets." msgstr "所输入筛选器的过期天数。 切换 & 设置。" #: src/lang.c:582 msgid "Apply kill only to current group or all groups. toggles & sets." msgstr "只对目前的群组或所有群组才套用砍除。 切换 & 设置。" #: src/lang.c:583 msgid "Apply select to current group or all groups. toggles & sets." msgstr "对目前的群组或所有群组套用选取。 切换 & 设置。" #: src/lang.c:584 msgid "kill an article via a menu" msgstr "透过菜单砍除文章" #: src/lang.c:585 msgid "auto-select (hot) an article via a menu" msgstr "透过菜单自动选取 (热门) 文章" #: src/lang.c:586 msgid "Browse URLs in article" msgstr "在文章中浏览网址" #: src/lang.c:587 msgid "0 - 9\t display article by number in current thread" msgstr "0 - 9\t 在目前的讨论串中依编号显示文章" #: src/lang.c:589 msgid "cancel (delete) or supersede (overwrite) current article" msgstr "取消 (删除) 或取代 (覆写) 目前的文章" #: src/lang.c:590 msgid "post followup to current article" msgstr "跟贴目前的文章" #: src/lang.c:591 msgid "post followup (don't copy text) to current article" msgstr "跟贴 (不复制文本) 目前的文章" #: src/lang.c:592 msgid "post followup to current article quoting complete headers" msgstr "跟贴目前的文章并引述完整标头" #: src/lang.c:593 msgid "repost chosen article to another group" msgstr "重新张贴所选文章到另外的群组" #: src/lang.c:595 msgid "edit article (mail-groups only)" msgstr "编辑文章 (只限邮件群组)" #: src/lang.c:596 msgid "display first article in current thread" msgstr "显示目前讨论串中的第一篇文章" #: src/lang.c:597 msgid "display first page of article" msgstr "显示文章的第一页" #: src/lang.c:598 #, fuzzy #| msgid "No URLs in this article" msgid "show MIME details of this article" msgstr "在这篇文章中没有网址" #: src/lang.c:599 msgid "display last article in current thread" msgstr "显示目前讨论串中的最后一篇文章" #: src/lang.c:600 msgid "display last page of article" msgstr "显示文章的最后一页" #: src/lang.c:601 msgid "mark rest of thread as read and advance to next unread" msgstr "标记其余的讨论串为已读并跳到下一个未读" #: src/lang.c:602 msgid "display next article" msgstr "显示下一篇文章" #: src/lang.c:603 msgid "display first article in next thread" msgstr "显示下一个讨论串的第一篇文章" #: src/lang.c:604 msgid "display next unread article" msgstr "显示下一篇未读文章" #: src/lang.c:605 msgid "go to the article that this one followed up" msgstr "前往这篇所跟贴的文章" #: src/lang.c:606 msgid "display previous article" msgstr "显示上一篇文章" #: src/lang.c:607 msgid "display previous unread article" msgstr "显示上一篇未读文章" #: src/lang.c:608 msgid "quickly kill an article using defaults" msgstr "使用默认值快速砍除文章" #: src/lang.c:609 msgid "quickly auto-select (hot) an article using defaults" msgstr "使用默认值快速自动选取 (热门) 文章" #: src/lang.c:610 msgid "return to group selection level" msgstr "回到群组选择层级" #: src/lang.c:611 msgid "reply through mail to author" msgstr "透过邮件回复作者" #: src/lang.c:612 msgid "reply through mail (don't copy text) to author" msgstr "透过邮件 (不复制文本) 回复作者" #: src/lang.c:613 msgid "reply through mail to author quoting complete headers" msgstr "透过邮件回复作者并引述完整标头" #: src/lang.c:614 msgid "search backwards within this article" msgstr "在这篇文章之内向后搜索" #: src/lang.c:615 msgid "search forwards within this article" msgstr "在这篇文章之内向前搜索" #: src/lang.c:616 msgid "show article in raw-mode (including all headers)" msgstr "在原始模式中显示文章 (包含所有标头)" #: src/lang.c:617 msgid "skip next block of included text" msgstr "跳过所含文本的下一个区块" #: src/lang.c:618 msgid "toggle display of sections hidden by a form-feed (^L) on/off" msgstr "切换显示由表格馈送 (^L) 所隐藏的区段 ON/OFF" #: src/lang.c:619 msgid "toggle display of all headers" msgstr "切换显示所有标头" #: src/lang.c:620 msgid "toggle word highlighting on/off" msgstr "切换字词高亮度显示 ON/OFF" #: src/lang.c:621 msgid "toggle ROT-13 (basic decode) for current article" msgstr "切换目前文章的 ROT-13 (基本解码)" #: src/lang.c:622 msgid "toggle tabwidth 4 <-> 8" msgstr "切换跳格宽度 4 <-> 8" #: src/lang.c:623 #, fuzzy #| msgid "toggle german TeX style decoding for current article" msgid "toggle German TeX style decoding for current article" msgstr "切换目前文章的德语 TeX 样式解码" #: src/lang.c:624 msgid "toggle display of uuencoded sections" msgstr "切换显示并编码区段" #: src/lang.c:625 msgid "View/pipe/save multimedia attachments" msgstr "查看/管道/保存多媒体附件" #: src/lang.c:626 msgid "choose first attachment in list" msgstr "选择列表中的第一个附件" #: src/lang.c:627 msgid "0 - 9\t choose attachment by number" msgstr "0 - 9\t 依编号选择附件" #: src/lang.c:628 msgid "choose last attachment in list" msgstr "选择列表中的最后一个附件" #: src/lang.c:630 msgid "pipe attachment into command" msgstr "将附件进入管道命令" #: src/lang.c:631 msgid "pipe raw attachment into command" msgstr "将原始附件进入管道命令" #: src/lang.c:633 msgid "save attachment to disk" msgstr "将附件保存到磁盘" #: src/lang.c:634 msgid "search for attachments forwards" msgstr "向前搜索附件" #: src/lang.c:635 msgid "search for attachments backwards" msgstr "向后搜索附件" #: src/lang.c:636 msgid "view attachment" msgstr "查看附件" #: src/lang.c:637 msgid "tag attachment" msgstr "标记附件" #: src/lang.c:638 msgid "tag attachments that match user specified pattern" msgstr "标记匹配用户指定模式的附件" #: src/lang.c:639 msgid "reverse tagging on all attachments (toggle)" msgstr "反向标记所有附件 (切换)" #: src/lang.c:640 msgid "untag all tagged attachments" msgstr "取消标记所有已标记附件" #: src/lang.c:641 msgid "toggle info message in last line (name/description of attachment)" msgstr "切换最后一行中的信息 (附件的名称/描述)" #: src/lang.c:642 msgid "choose first attribute in list" msgstr "选择列表中的第一项属性" #: src/lang.c:643 msgid "0 - 9\t choose attribute by number" msgstr "0 - 9\t 依编号选择属性" #: src/lang.c:644 msgid "choose last attribute in list" msgstr "选择列表中的最后一项属性" #: src/lang.c:645 msgid "reset attribute to a default value" msgstr "重置属性为默认值" #: src/lang.c:646 msgid "search backwards for an attribute" msgstr "向后搜索某一属性" #: src/lang.c:647 msgid "search forwards for an attribute" msgstr "向前搜索某一属性" #: src/lang.c:648 msgid "select attribute" msgstr "选取属性" #: src/lang.c:649 msgid "toggle back to options menu when invoked from there" msgstr "如果之前从那里调用就切回选项功能表" #: src/lang.c:650 #, c-format msgid "report bug or comment via mail to %s" msgstr "透过邮件报告错误或评论给 %s" #: src/lang.c:651 msgid "choose first option in list" msgstr "选择列表中的第一个选项" #: src/lang.c:652 msgid "0 - 9\t choose option by number" msgstr "0 - 9\t 依编号选择选项" #: src/lang.c:653 msgid "choose last option in list" msgstr "选择列表中的最后一个选项" #: src/lang.c:654 msgid "start scopes menu" msgstr "起始范围菜单" #: src/lang.c:655 msgid "search backwards for an option" msgstr "向后搜索某一选项" #: src/lang.c:656 msgid "search forwards for an option" msgstr "向前搜索某一选项" #: src/lang.c:657 msgid "select option" msgstr "选取选项" #: src/lang.c:658 msgid "toggle to attributes menu" msgstr "切换到属性菜单" #: src/lang.c:659 msgid "choose range of articles to be affected by next command" msgstr "选择会被下一个命令所影响的文章范围" #: src/lang.c:660 msgid "escape from command prompt" msgstr "从指令提示符号退出" #: src/lang.c:661 msgid "edit filter file" msgstr "编辑筛选器文件" #: src/lang.c:662 msgid "get help" msgstr "提取说明" #: src/lang.c:663 msgid "display last article viewed" msgstr "显示最后一篇已查看文章" #: src/lang.c:664 msgid "down one line" msgstr "向下一行" #: src/lang.c:665 msgid "up one line" msgstr "向上一行" #: src/lang.c:666 msgid "go to article chosen by Message-ID" msgstr "前往依消息识别号所选文章" #: src/lang.c:667 msgid "mail article/thread/hot/pattern/tagged articles to someone" msgstr "邮寄文章/讨论串/热门/模式/已标记文章给某人" #: src/lang.c:668 msgid "menu of configurable options" msgstr "可组配选项的菜单" #: src/lang.c:669 msgid "down one page" msgstr "向下一页" #: src/lang.c:670 msgid "up one page" msgstr "向上一页" #: src/lang.c:672 msgid "post (write) article to current group" msgstr "张贴 (写入) 文章到目前的群组" #: src/lang.c:673 msgid "post postponed articles" msgstr "张贴被搁置的文章" #: src/lang.c:675 msgid "list articles posted by you (from posted file)" msgstr "列出由您所张贴的文章 (来自张贴的文件)" #: src/lang.c:676 msgid "return to previous menu" msgstr "回到上一个菜单" #: src/lang.c:677 msgid "quit tin immediately" msgstr "马上离开 tin" #: src/lang.c:678 msgid "redraw page" msgstr "重绘页面" #: src/lang.c:679 msgid "save article/thread/hot/pattern/tagged articles to file" msgstr "保存文章/讨论串/热门/模式/已标记文章到文件" #: src/lang.c:680 msgid "save marked articles automatically without user prompts" msgstr "自动保存标记的文章而无需用户提示" #: src/lang.c:681 msgid "scroll the screen one line down" msgstr "卷动屏幕一次下移一行" #: src/lang.c:682 msgid "scroll the screen one line up" msgstr "卷动屏幕一次上移一行" #: src/lang.c:683 msgid "search for articles by author backwards" msgstr "依作者向后搜索文章" #: src/lang.c:684 msgid "search for articles by author forwards" msgstr "依作者向前搜索文章" #: src/lang.c:685 msgid "search all articles for a given string (this may take some time)" msgstr "对所有文章搜索给定的字串 (这也许会花一点时间)" #: src/lang.c:686 msgid " \t (searches are case-insensitive and wrap around to all articles)" msgstr " \t (搜索时大小写不须相符并回到所有文章的前端)" #: src/lang.c:687 msgid "search for articles by Subject line backwards" msgstr "依主题向后搜索文章" #: src/lang.c:688 msgid "search for articles by Subject line forwards" msgstr "依主题向前搜索文章" #: src/lang.c:689 msgid "repeat last search" msgstr "重复最后一笔搜索" #: src/lang.c:690 msgid "tag current article for reposting/mailing/piping/printing/saving" msgstr "标记目前的文章以用于重新张贴/邮寄/管道/打印/保存" #: src/lang.c:691 msgid "toggle info message in last line (subject/description)" msgstr "切换最后一行中的信息消息 (主旨/描述)" #: src/lang.c:692 msgid "toggle inverse video" msgstr "切换反白显示" #: src/lang.c:693 #, fuzzy #| msgid "toggle mini help menu display" msgid "toggle mini help menu and posting etiquette display" msgstr "切换迷你说明菜单显示" #: src/lang.c:694 msgid "cycle the display of authors email address, real name, both or neither" msgstr "周期显示作者电子邮件地址、真实名称、两者或皆非" #: src/lang.c:695 msgid "show version information" msgstr "显示版本信息" #: src/lang.c:696 msgid "mark all articles as read and return to group selection menu" msgstr "标记所有文章为已读并回到群组选择菜单" #: src/lang.c:697 msgid "mark all articles as read and enter next group with unread articles" msgstr "标记所有文章为已读并进入下一个群组与未读文章" #: src/lang.c:698 msgid "choose first thread in list" msgstr "选择清单中的第一笔讨论串" #: src/lang.c:699 msgid "choose last thread in list" msgstr "选择清单中的最后一篇讨论串" #: src/lang.c:700 msgid "list articles within current thread (bring up Thread sub-menu)" msgstr "列出目前讨论串之内的文章 (带出讨论串子菜单)" #: src/lang.c:701 msgid "mark article as unread" msgstr "标记文章为未读" #: src/lang.c:702 msgid "mark current thread, range or tagged threads as read" msgstr "标记目前的讨论串、范围或已标记讨论串为已读" #: src/lang.c:703 msgid "mark current thread, range or tagged threads as unread" msgstr "标记目前的讨论串、范围或已标记讨论串为未读" #: src/lang.c:704 msgid "mark current/range/selected/pattern/tagged as read after prompting" msgstr "标记目前的/范围/已选/模式/已标记于提示之后为已读" #: src/lang.c:705 msgid "mark current/range/selected/pattern/tagged as unread after prompting" msgstr "标记目前的/范围/已选/模式/已标记于提示之后为未读" #: src/lang.c:706 msgid "toggle display of all/selected articles" msgstr "切换显示所有/已选文章" #: src/lang.c:707 msgid "display next group" msgstr "显示下一个群组" #: src/lang.c:708 msgid "display previous group" msgstr "显示上一个群组" #: src/lang.c:709 msgid "toggle all selections (all articles)" msgstr "切换所有选取 (所有文章)" #: src/lang.c:710 msgid "select group (make \"hot\")" msgstr "选取群组 (设为“热门”)" #: src/lang.c:711 msgid "select thread" msgstr "选取讨论串" #: src/lang.c:712 msgid "select threads if at least one unread article is selected" msgstr "如果至少选取了一篇未读文章就选取讨论串" #: src/lang.c:713 msgid "select threads that match user specified pattern" msgstr "选取匹配用户指定模式的讨论串" #: src/lang.c:714 msgid "0 - 9\t choose thread by number" msgstr "0 - 9\t 依编号选择讨论串" #: src/lang.c:715 msgid "toggle limit number of articles to get, and reload" msgstr "切换要提取文章的限制数量，并重新加载" #: src/lang.c:716 msgid "toggle display of all/unread articles" msgstr "切换显示所有/未读文章" #: src/lang.c:717 msgid "toggle selection of thread" msgstr "切换讨论串的选取" #: src/lang.c:718 msgid "cycle through threading options available" msgstr "重复循环可用的讨论串选项" #: src/lang.c:719 msgid "undo all selections (all articles)" msgstr "复原所有选取 (所有文章)" #: src/lang.c:720 msgid "untag all tagged threads" msgstr "取消标记所有已标记讨论串" #: src/lang.c:721 #, fuzzy #| msgid "search for articles by author forwards" msgid "search for articles forwards" msgstr "依作者向前搜索文章" #: src/lang.c:722 #, fuzzy #| msgid "search for articles by author backwards" msgid "search for articles backwards" msgstr "依作者向后搜索文章" #: src/lang.c:723 #, fuzzy #| msgid "toggle info message in last line (URL)" msgid "toggle info message in last line (Message-ID)" msgstr "切换最后一行的信息消息 (网址)" #: src/lang.c:724 #, fuzzy #| msgid "go to article chosen by Message-ID" msgid "Open article by Message-ID" msgstr "前往依消息识别号所选文章" #: src/lang.c:725 msgid "add new scope" msgstr "加入新的范围" #: src/lang.c:726 msgid "delete scope" msgstr "删除范围" #: src/lang.c:727 msgid "edit attributes file" msgstr "编辑属性文件" #: src/lang.c:728 msgid "choose first scope in list" msgstr "选择清单中的第一笔范围" #: src/lang.c:729 msgid "0 - 9\t choose scope by number" msgstr "0 - 9\t 依编号选择范围" #: src/lang.c:730 msgid "choose last scope in list" msgstr "选择清单中的最后一笔范围" #: src/lang.c:731 msgid "move scope" msgstr "移动范围" #: src/lang.c:732 msgid "rename scope" msgstr "重命名范围" #: src/lang.c:733 msgid "select scope" msgstr "选取范围" #: src/lang.c:734 msgid "mark all articles in group as read" msgstr "标记所有群组中的文章为已读" #: src/lang.c:735 msgid "mark all articles in group as read and move to next unread group" msgstr "标记所有群组中的文章为已读并移动到下一个未读群组" #: src/lang.c:736 msgid "choose first group in list" msgstr "选择清单中的第一笔群组" #: src/lang.c:737 msgid "choose group by name" msgstr "依名称选择群组" #: src/lang.c:738 msgid "0 - 9\t choose group by number" msgstr "0 - 9\t 依编号选择群组" #: src/lang.c:739 msgid "choose range of groups to be affected by next command" msgstr "选择受下一个命令所影响的群组范围" #: src/lang.c:740 msgid "choose last group in list" msgstr "选择清单中的最后一个群组" #: src/lang.c:742 #, fuzzy #| msgid "go to article chosen by Message-ID" msgid "list groups which an article has been posted to (by Message-ID)" msgstr "前往依消息识别号所选文章" #: src/lang.c:743 msgid " \t (go to article if at least one of the groups is available)" msgstr "" #: src/lang.c:745 msgid "mark all articles in chosen group unread" msgstr "标记所有在已选群组中的文章为未读" #: src/lang.c:746 msgid "move chosen group within list" msgstr "移动清单内所选群组" #: src/lang.c:747 msgid "choose next group with unread news" msgstr "选择具有未读新闻的下一个群组" #: src/lang.c:748 src/lang.c:1797 msgid "quit" msgstr "离开" #: src/lang.c:749 msgid "quit without saving configuration changes" msgstr "离开但不保存组态变更" #: src/lang.c:750 msgid "read chosen group" msgstr "读取所选群组" #: src/lang.c:751 msgid "reset .newsrc (all available articles in groups marked unread)" msgstr "重置 .newsrc (标记所有可用群组中的文章为未读)" #: src/lang.c:752 msgid "search backwards for a group name" msgstr "向后搜索群组名称" #: src/lang.c:753 msgid " \t (all searches are case-insensitive and wrap around)" msgstr " \t (所有搜索不须符合大小写并回到开始部分)" #: src/lang.c:754 msgid "search forwards for a group name" msgstr "向前搜索群组名称" #: src/lang.c:755 msgid "subscribe to chosen group" msgstr "订阅所选群组" #: src/lang.c:756 msgid "subscribe to groups that match pattern" msgstr "订阅匹配模式的群组" #: src/lang.c:757 msgid "reread active file to check for any new news" msgstr "重新读取现用文件以检查看看任何新的新闻" #: src/lang.c:758 msgid "show NNTP[S] connection details" msgstr "" #: src/lang.c:759 msgid "toggle display of group name only or group name plus description" msgstr "切换只显示群组名称或是群组名称加上描述" #: src/lang.c:760 msgid "toggle display to show all/unread subscribed groups" msgstr "切换显示全部/未读的已订阅群组" #: src/lang.c:761 msgid "unsubscribe from chosen group" msgstr "取消订阅所选群组" #: src/lang.c:762 msgid "unsubscribe from groups that match pattern" msgstr "取消订阅匹配模式的群组" #: src/lang.c:763 msgid "sort the list of groups" msgstr "排序群组清单" #: src/lang.c:764 msgid "toggle display to show all/subscribed groups" msgstr "切换显示全部/已订阅的群组" #: src/lang.c:765 #, fuzzy #| msgid "tag all parts of current multipart-message in order" msgid "tag/untag all parts of current multipart-message in order" msgstr "依序标记目前多部件消息的所有部分" #: src/lang.c:766 msgid "0 - 9\t choose article by number" msgstr "0 - 9\t 依编号选择文章" #: src/lang.c:767 msgid "mark thread as read and return to group index page" msgstr "标记讨论串为已读并回到群组索引页面" #: src/lang.c:768 msgid "mark thread as read and enter next unread thread or group" msgstr "标记讨论串为已读并输入下一个未读的讨论串或群组" #: src/lang.c:769 msgid "choose first article in list" msgstr "选择清单中的第一篇文章" #: src/lang.c:770 msgid "choose last article in list" msgstr "选择清单中的最后一篇文章" #: src/lang.c:771 msgid "mark art, range or tagged arts as read; move crsr to next unread art" msgstr "标记文章、范围或已标记文章为已读；移动光标到下一篇未读文章" #: src/lang.c:772 msgid "mark article, range or tagged articles as unread" msgstr "标记文章、范围或已标记文章为未读" #: src/lang.c:773 msgid "mark current thread as unread" msgstr "标记目前讨论串为未读" #: src/lang.c:774 msgid "read chosen article" msgstr "读取所选文章" #: src/lang.c:775 msgid "" "Display properties\n" "------------------" msgstr "" "显示属性\n" "------------------" #: src/lang.c:776 msgid "" "Miscellaneous\n" "-------------" msgstr "" "杂项\n" "-------------" #: src/lang.c:777 msgid "" "Moving around\n" "-------------" msgstr "" "四处移动\n" "-------------" #: src/lang.c:778 msgid "" "Group/thread/article operations\n" "-------------------------------" msgstr "" "群组/讨论串/文章操作\n" "-------------------------------" #: src/lang.c:779 msgid "" "Attachment operations\n" "---------------------" msgstr "" "附件操作\n" "---------------------" #: src/lang.c:780 msgid "" "Attribute operations\n" "--------------------" msgstr "" "属性操作\n" "--------------------" #: src/lang.c:781 msgid "" "Option operations\n" "-----------------" msgstr "" "选项操作\n" "-----------------" #: src/lang.c:782 #, fuzzy #| msgid "" #| "Group/thread/article operations\n" #| "-------------------------------" msgid "" "Posted article operations\n" "-------------------------" msgstr "" "群组/讨论串/文章操作\n" "-------------------------------" #: src/lang.c:783 msgid "" "Scope operations\n" "----------------" msgstr "" "范围操作\n" "----------------" #: src/lang.c:784 msgid "" "URL operations\n" "--------------" msgstr "" "网址操作\n" "--------------" #: src/lang.c:785 msgid "choose first URL in list" msgstr "选择清单中的第一笔网址" #: src/lang.c:786 msgid "0 - 9\t choose URL by number" msgstr "0 - 9\t 依编号选择网址" #: src/lang.c:787 msgid "choose last URL in list" msgstr "选择清单中的最后一笔网址" #: src/lang.c:788 msgid "search for URLs forwards" msgstr "向前搜索网址" #: src/lang.c:789 msgid "search for URLs backwards" msgstr "向后搜索网址" #: src/lang.c:790 msgid "Open URL in browser" msgstr "在浏览器中打开网址" #: src/lang.c:791 msgid "toggle info message in last line (URL)" msgstr "切换最后一行的信息消息 (网址)" #: src/lang.c:793 msgid "Group Level Commands" msgstr "群组层级命令" #: src/lang.c:794 msgid "Kill filter added" msgstr "砍除已加入的筛选器" #: src/lang.c:795 msgid "Auto-selection filter added" msgstr "自动选取已加入的筛选器" #: src/lang.c:796 msgid "All parts tagged" msgstr "已标记所有部分" #: src/lang.c:797 #, fuzzy #| msgid "All parts tagged" msgid "All parts untagged" msgstr "已标记所有部分" #: src/lang.c:798 #, c-format msgid "Building References-trees (%d/%d)..." msgstr "" #: src/lang.c:799 msgid "Storing article for later posting" msgstr "存入文章以用于稍后张贴" #: src/lang.c:800 msgid "Please enter a valid character" msgstr "请输入有效字符" #: src/lang.c:801 #, c-format msgid "Missing part #%d" msgstr "缺少部分的 #%d" #: src/lang.c:802 msgid "*** No postponed articles ***" msgstr "*** 未被搁置的文章 ***" #: src/lang.c:803 msgid "Not a multi-part message" msgstr "不是一篇多部件消息" #: src/lang.c:804 msgid "You are not subscribed to this group" msgstr "您未订阅这个群组" #: src/lang.c:805 msgid "No previous expression" msgstr "没有上一个表达式" #: src/lang.c:806 msgid "Operation disabled in no-overwrite mode" msgstr "在无覆写模式中的操作已停用" #. TODO: replace hard coded key-name in txt_info_postponed #: src/lang.c:808 #, c-format msgid "%d postponed %s, reuse with ^O...\n" msgstr "%d 已搁置 %s，按下 ^O 以重新使用…\n" #: src/lang.c:809 msgid "" "X-Conversion-Note: multipart/alternative contents have been removed.\n" " To get the whole article, turn alternative handling OFF in the Option Menu\n" msgstr "" "X-Conversion-Note: 多部件/替代内容已被移除。\n" " 要提取整篇文章，请在选项功能表中关闭替代处理\n" #: src/lang.c:811 #, c-format msgid "Save filename for %s/%s is a mailbox. Attachment not saved" msgstr "保存 %s/%s 的文件名是一个信箱。附件未被保存" #: src/lang.c:812 msgid "TeX2Iso encoded article" msgstr "TeX2Iso 编码文章" #. TODO: replace hard coded key-names #: src/lang.c:814 #, fuzzy, c-format #| msgid "" #| "\n" #| "Welcome to %s, a full screen threaded Netnews reader. It can read news locally\n" #| "(ie. /news) or remotely (-r option) from a NNTP (Network News Transport\n" #| "Protocol) server. -h lists the available command line options.\n" #| "\n" #| "%s has four newsreading levels, the newsgroup selection page, the group index\n" #| "page, the thread listing page and the article viewer. Help is available at each\n" #| "level by pressing the 'h' command.\n" #| "\n" #| "Move up/down by using the terminal arrow keys or 'j' and 'k'. Use PgUp/PgDn or\n" #| "Ctrl-U and Ctrl-D to page up/down. Enter a newsgroup by pressing RETURN/TAB.\n" #| "\n" #| "Articles, threads, tagged articles or articles matching a pattern can be mailed\n" #| "('m' command), printed ('o' command), saved ('s' command), piped ('|' command).\n" #| "Use the 'w' command to post a news article, the 'f'/'F' commands to post a\n" #| "follow-up to an existing news article and the 'r'/'R' commands to reply via\n" #| "mail to an existing news article author. The 'M' command allows the operation\n" #| "of %s to be configured via a menu.\n" #| "\n" #| "For more information read the manual page, README, INSTALL, TODO and FTP files.\n" #| "Please send bug-reports/comments to %s with the 'R' command.\n" msgid "" "\n" "Welcome to %s, a full screen threaded Netnews reader. It can read news locally\n" "(i.e. /news) or remotely (-r option) from an NNTP (Network News Transport\n" "Protocol) server. -h lists the available command line options.\n" "\n" "%s has four newsreading levels, the newsgroup selection page, the group index\n" "page, the thread listing page and the article viewer. Help is available at each\n" "level by pressing the 'h' command.\n" "\n" "Move up/down by using the terminal arrow keys or 'j' and 'k'. Use PgUp/PgDn or\n" "Ctrl-U and Ctrl-D to page up/down. Enter a newsgroup by pressing RETURN/TAB.\n" "\n" "Articles, threads, tagged articles or articles matching a pattern can be mailed\n" "('m' command), printed ('o' command), saved ('s' command), piped ('|' command).\n" "Use the 'w' command to post a news article, the 'f'/'F' commands to post a\n" "follow-up to an existing news article and the 'r'/'R' commands to reply via\n" "mail to an existing news article author. The 'M' command allows the operation\n" "of %s to be configured via a menu.\n" "\n" "For more information read the manual page, README, INSTALL, TODO and FTP files.\n" "Please send bug-reports/comments to %s with the 'R' command.\n" msgstr "" "\n" "欢迎使用 %s 这个全屏幕支持讨论串的网络新闻阅读器。它可以读取本地端新闻\n" "(亦即 /news) 或远程 (-r 选项) 来自 NNTP (网络新闻传输\n" "协定) 服务器。-h 将列出可用的命令行参数选项。\n" "\n" "%s 有四个新闻阅读层级：新闻群组选择页面、群组索引\n" "页面、讨论串列表页面和文章查看器。于每个层级由按下\n" "‘h’命令都可以看到说明。\n" "\n" "向上/向下移动可经由使用终端机方向键或‘j’和‘k’。 使用 PgUp/PgDn 或\n" "Ctrl-U 和 Ctrl-D 以向上/向下一页。输入新闻群组可经由按下 RETURN/TAB。\n" "\n" "文章、讨论串、已标记文章或匹配模式的文章都可以被邮寄\n" "(‘m’命令)、打印 (‘o’命令)、保存 (‘s’命令)、管道 (‘|’命令)。\n" "使用‘w’命令来张贴新闻文章，‘f’/‘F’命令可以张贴\n" "回应到现有新闻文章，以及‘r’/‘R’命令来透过电子邮件\n" "回复给现有新闻文章的作者。‘M’命令允许您透过菜单来\n" "组配 %s 的操作。\n" "\n" "要获得更多信息，请阅读在线手册、README、INSTALL、TODO 和 FTP 等文件。\n" "请利用‘R’命令发送错误报告/意见给 %s。\n" #: src/lang.c:830 #, c-format msgid "Invalid From:-header \"%s\". Check your mail_address setting." msgstr "" #: src/lang.c:832 msgid "Invalid multibyte sequence found\n" msgstr "出现无效的多字节序列\n" #: src/lang.c:835 #, fuzzy, c-format #| msgid "Invalid Sender:-header %s" msgid "Invalid Sender:-header \"%s\"" msgstr "无效的 Sender: -header %s" #: src/lang.c:837 msgid "Inverse video disabled" msgstr "反白显示已停用" #: src/lang.c:838 msgid "Inverse video enabled" msgstr "反白显示已启用" #: src/lang.c:840 #, c-format msgid "Missing definition for %s\n" msgstr "缺少 %s 的定义\n" #: src/lang.c:841 #, c-format msgid "Invalid key definition '%s'\n" msgstr "无效的按键定义‘%s’\n" #: src/lang.c:842 #, c-format msgid "Invalid keyname '%s'\n" msgstr "无效的按键名称‘%s’\n" #: src/lang.c:843 #, c-format msgid "Keymap file was upgraded to version %s\n" msgstr "Keymap 文件已升级到版本 %s\n" #: src/lang.c:844 #, c-format msgid "Kill From: [%s] (y/n): " msgstr "砍除 From: [%s] (y/n)：" #: src/lang.c:845 msgid "Kill Lines: (num): " msgstr "砍除 Lines: (num)：" #: src/lang.c:846 msgid "Kill Article Menu" msgstr "砍除文章菜单" #: src/lang.c:847 #, fuzzy, c-format #| msgid "Kill Msg-Id: [%s] (f/l/o/n): " msgid "Kill Msg-ID: [%s] (f/l/o/n): " msgstr "砍除 Msg-Id： [%s] (f/l/o/n)：" #: src/lang.c:848 msgid "Kill pattern scope : " msgstr "砍除模式范围 ：" #: src/lang.c:849 #, c-format msgid "Kill Subject: [%s] (y/n): " msgstr "砍除 Subject: [%s] (y/n)：" #: src/lang.c:850 msgid "Kill text pattern : " msgstr "砍除文本模式 ：" #: src/lang.c:851 msgid "Kill time in days : " msgstr "砍除时间于每日 ：" #: src/lang.c:853 msgid "Last" msgstr "最后一笔" #: src/lang.c:854 msgid "-- Last response --" msgstr "-- 最后一笔回应 --" #: src/lang.c:855 #, c-format msgid "Lines %s " msgstr "行 %s " #: src/lang.c:861 #, fuzzy #| msgid "Article unavailable" msgid "Function not available." msgstr "无法使用文章" #: src/lang.c:862 msgid "Not reading via NNTP." msgstr "" #: src/lang.c:864 #, fuzzy, c-format #| msgid "Group %.*s..." msgid "Group: %s" msgstr "群组 %.*s…" #: src/lang.c:865 #, fuzzy, c-format #| msgid "Group %.*s..." msgid "Groups: %s" msgstr "群组 %.*s…" #: src/lang.c:868 msgid "Mail" msgstr "邮寄" #: src/lang.c:869 msgid "mailbox " msgstr "信箱 " #: src/lang.c:870 #, c-format msgid "Mail article(s) to [%.*s]> " msgstr "邮寄文章到 [%.*s]>" #: src/lang.c:871 #, c-format msgid "Mailing log to %s\n" msgstr "邮寄记录档到 %s\n" #: src/lang.c:872 msgid "Mail bug report..." msgstr "邮寄错误报告…" #: src/lang.c:873 #, c-format msgid "Mail BUG REPORT to %s?" msgstr "邮寄错误报告到 %s？" #: src/lang.c:874 msgid "Mailed" msgstr "已寄出" #: src/lang.c:875 #, c-format msgid "Mailing to %s..." msgstr "邮寄到 %s…" #: src/lang.c:876 #, fuzzy #| msgid "" #| "# [Mail/Save] active file. Format is like news active file:\n" #| "# groupname max.artnum min.artnum /dir\n" #| "# The 4th field is the basedir (ie. ~/Mail or ~/News)\n" #| "#\n" msgid "" "# [Mail/Save] active file. Format is like news active file:\n" "# groupname max.artnum min.artnum /dir\n" "# The 4th field is the basedir (i.e. ~/Mail or ~/News)\n" "#\n" msgstr "" "# [邮寄/保存] 现用文件。格式如同新闻现用文件：\n" "# 群组名称 最大文章编号 最小文章编号 目录\n" "# 第四个字段是基底目录 (亦即 ~/Mail 或 ~/News)\n" "#\n" #: src/lang.c:879 #, c-format msgid "%s marked as read" msgstr "%s 标记为已读" #: src/lang.c:880 #, c-format msgid "%s marked as unread" msgstr "%s 标记为未读" #: src/lang.c:881 #, c-format msgid "Marked %d of %d %s as read" msgstr "标记 %2$d 中的 %1$d %3$s 为已读" #: src/lang.c:882 #, c-format msgid "Marked %d of %d %s as unread" msgstr "标记 %2$d 中的 %1$d %3$s 为未读" #: src/lang.c:883 src/lang.c:1753 msgid "Mark" msgstr "标记" #: src/lang.c:884 #, c-format msgid "Mark all articles as read%s?" msgstr "标记所有文章为 %s 读？" #: src/lang.c:885 #, c-format msgid "Mark article as read%s?" msgstr "标记文章为 %s 读？" #: src/lang.c:886 #, c-format msgid "Mark group %s as read?" msgstr "标记群组 %s 为已读？" #: src/lang.c:887 #, c-format msgid "Mark thread as read%s?" msgstr "标记讨论串为 %s 读？" #: src/lang.c:888 #, c-format msgid "Matching %s groups..." msgstr "正在匹配 %s 群组…" #: src/lang.c:889 src/lang.c:902 src/lang.c:905 src/lang.c:911 #, c-format msgid "=set current to n; %s=line down; %s=line up; %s=help; %s=quit" msgstr "=设置目前为 n; %s=下移一行；%s=上移一行；%s=求助；%s=离开" #: src/lang.c:891 #, c-format msgid "%s=view; %s=pipe; %s=pipe raw; %s=save; %s=tag; %s=tag pattern; %s=untag all" msgstr "%s=查看；%s=管道；%s=管道原始；%s=保存；%s=标记；%s=标记模式；%s=取消所有标记" #: src/lang.c:893 #, c-format msgid "%s=view; %s=save; %s=tag; %s=tag pattern; %s=untag all" msgstr "%s=查看；%s=保存；%s=标记；%s=标记模式；%s=取消所有标记" #: src/lang.c:895 #, c-format msgid "%s=reverse tagging; %s=search forwards; %s=search backwards; %s=repeat search" msgstr "%s=反向标记；%s=向前搜索；%s=向后搜索；%s=重复搜索" #: src/lang.c:896 src/lang.c:900 #, c-format msgid "=set current to n; %s=next unread; %s=search pattern; %s=kill/select" msgstr "=设置目前为 n; %s=下一个未读；%s=搜索模式；%s=砍除/选取" #: src/lang.c:897 #, c-format msgid "%s=author search; %s=catchup; %s=line down; %s=line up; %s=mark read; %s=list thread" msgstr "%s=作者搜索；%s=设回未读；%s=下移一行；%s=上移一行；%s=设为已读；%s=列出讨论串" #: src/lang.c:898 #, c-format msgid "%s=line up; %s=line down; %s=page up; %s=page down; %s=top; %s=bottom" msgstr "%s=上移一行；%s=下移一行；%s=向上一页；%s=向下一页；%s=顶端；%s=底部" #: src/lang.c:899 #, c-format msgid "%s=search forwards; %s=search backwards; %s=quit" msgstr "%s=向前搜索；%s=向后搜索；%s=离开" #: src/lang.c:901 #, c-format msgid "%s=author search; %s=body search; %s=catchup; %s=followup; %s=mark read" msgstr "%s=作者搜索；%s=内文搜索；%s=设回未读；%s=跟贴；%s=设为已读" #: src/lang.c:903 src/lang.c:912 #, c-format msgid "%s=search forwards; %s=search backwards; %s=repeat search" msgstr "%s=向前搜索；%s=向后搜索；%s=重复搜索" #: src/lang.c:904 #, c-format msgid "%s=add; %s=move; %s=rename; %s=delete" msgstr "%s=加入；%s=移动；%s=重命名；%s=删除" #: src/lang.c:906 #, c-format msgid "=set current to n; %s=next unread; %s,%s=search pattern; %s=catchup" msgstr "=设置目前为 n; %s=下一个未读；%s,%s=搜索模式；%s=设回未读" #: src/lang.c:907 #, c-format msgid "%s=line down; %s=line up; %s=help; %s=move; %s=quit; %s=toggle all/unread" msgstr "%s=下移一行；%s=上移一行；%s=求助；%s=移动；%s=离开；%s=切换全部/未读" #: src/lang.c:908 #, c-format msgid "%s=subscribe; %s=sub pattern; %s=unsubscribe; %s=unsub pattern; %s=yank in/out" msgstr "%s=订阅；%s=订阅模式；%s=取消订阅；%s=取消订阅模式；%s=拔入/出" #: src/lang.c:909 #, c-format msgid "=set current to n; %s=next unread; %s=catchup; %s=display toggle" msgstr "=设置目前为 n; %s=下一个未读；%s=设回未读；%s=显示切换" #: src/lang.c:910 #, c-format msgid "%s=help; %s=line down; %s=line up; %s=quit; %s=tag; %s=mark unread" msgstr "%s=求助；%s=下移一行；%s=上移一行；%s=离开；%s=标记；%s=标记未读" #: src/lang.c:913 msgid "--More--" msgstr "--更多--" #: src/lang.c:915 #, fuzzy, c-format #| msgid "MOTD: " msgid "MOTD: %s\n" msgstr "MOTD: " #: src/lang.c:917 #, c-format msgid "Moving %s..." msgstr "正在移动 %s…" #: src/lang.c:918 msgid "Message-ID: & last Reference " msgstr "Message-ID: & 最近参考 " #: src/lang.c:919 msgid "Message-ID: line " msgstr "Message-ID: 行 " #: src/lang.c:920 msgid "Message-ID: & References: line" msgstr "Message-ID: & References: 行" #: src/lang.c:922 #, c-format msgid "Go to newsgroup [%s]> " msgstr "前往新闻群组 [%s]>" #: src/lang.c:923 msgid "newsgroups" msgstr "新闻群组" #: src/lang.c:924 #, c-format msgid "Position %s in group list (1,2,..,$) [%d]> " msgstr "定位 %s 于群组清单 (1,2,..,$) [%d]>" #: src/lang.c:925 msgid "newsgroup" msgstr "新闻群组" #: src/lang.c:926 msgid "Try and save newsrc file again?" msgstr "再次尝试并保存 newsrc 文件？" #: src/lang.c:927 #, fuzzy, c-format #| msgid "Warning: No newsgroups were written to your newsrc file. Save aborted." msgid "Warning: No groups written to your %s file. Save aborted." msgstr "警告：没有任何新闻群组被写入您的 newsrc 文件。已放弃保存。" #: src/lang.c:928 #, fuzzy, c-format #| msgid "newsrc file saved successfully.\n" msgid "%s file saved successfully.\n" msgstr "newsrc 文件已成功保存。\n" #: src/lang.c:929 msgid "-- Next response --" msgstr "-- 下一个回应 --" #: src/lang.c:930 msgid "No " msgstr "否 " #: src/lang.c:931 msgid "*** No articles ***" msgstr "*** 没有文章 ***" #: src/lang.c:932 msgid "No articles have been posted" msgstr "没有任何文章已被张贴" #: src/lang.c:933 msgid "*** No attachments ***" msgstr "*** 没有附件 ***" #: src/lang.c:934 msgid "*** No description ***" msgstr "*** 没有描述 ***" #: src/lang.c:935 msgid "No filename" msgstr "没有文件名" #: src/lang.c:936 msgid "No group" msgstr "没有群组" #: src/lang.c:937 msgid "*** No groups ***" msgstr "*** 没有群组 ***" #: src/lang.c:938 msgid "No more groups to read" msgstr "已无可读取群组" #: src/lang.c:939 msgid "No last message" msgstr "没有最近一笔消息" #: src/lang.c:940 msgid "No mail address" msgstr "没有邮件地址" #: src/lang.c:941 msgid "No articles marked for saving" msgstr "没有标记要保存的文章" #: src/lang.c:942 msgid "No match" msgstr "没有匹配" #: src/lang.c:943 msgid "No more groups" msgstr "已无群组" #: src/lang.c:944 msgid "No newsgroups" msgstr "没有新闻群组" #: src/lang.c:945 msgid "No next unread article" msgstr "没有下一篇未读文章" #: src/lang.c:946 msgid "No previous group" msgstr "没有上一个群组" #: src/lang.c:947 msgid "No previous search, nothing to repeat" msgstr "没有上一个搜索，没有任何东西可重复" #: src/lang.c:948 msgid "No previous unread article" msgstr "没有上一篇未读文章" #: src/lang.c:949 msgid "No responses" msgstr "没有回应" #: src/lang.c:950 msgid "No responses to list in current thread" msgstr "在目前的讨论串中没有回应可列出" #: src/lang.c:951 msgid "*** No scopes ***" msgstr "*** 没有范围 ***" #: src/lang.c:952 msgid "No search string" msgstr "没有搜索字串" #: src/lang.c:953 msgid "No subject" msgstr "没有主旨" #: src/lang.c:955 #, c-format msgid "%s: Terminal must have clear to end-of-line (ce)\n" msgstr "%s：终端机必须能够清空到行尾 (ce)\n" #: src/lang.c:956 #, c-format msgid "%s: Terminal must have clear to end-of-screen (cd)\n" msgstr "%s：终端机必须能够清空到屏幕末端 (cd)\n" #: src/lang.c:957 #, c-format msgid "%s: Terminal must have clearscreen (cl) capability\n" msgstr "%s：终端机必须具备清空屏幕 (cl) 的能力\n" #: src/lang.c:958 #, c-format msgid "%s: Terminal must have cursor motion (cm)\n" msgstr "%s：终端机必须能够移动光标 (cm)\n" #: src/lang.c:959 #, c-format msgid "%s: TERM variable must be set to use screen capabilities\n" msgstr "%s：TERM 变量必须被设置以使用屏幕能力\n" #: src/lang.c:961 #, c-format msgid "No viewer found for %s/%s\n" msgstr "找不到任何查看器用于 %s/%s\n" #: src/lang.c:962 src/lang.c:1665 src/lang.c:1693 src/lang.c:1991 msgid "None" msgstr "无" #: src/lang.c:963 msgid "Newsgroup does not exist on this server" msgstr "新闻群组不存在于这个服务器" #: src/lang.c:964 #, c-format msgid "Group %s not found in active file" msgstr "在现用文件中找不到群组 %s" #: src/lang.c:966 msgid "c)reate it, use a)lternative name, use d)efault .newsrc, q)uit tin: " msgstr "c)创建它、使用 a)替代名称、使用 d)缺省 .newsrc、q)离开 tin：" #: src/lang.c:967 msgid "use a)lternative name, use d)efault .newsrc, q)uit tin: " msgstr "使用 a)替代名称、使用 d)缺省 .newsrc、q)离开 tin：" #: src/lang.c:968 #, c-format msgid "" "# NNTP-server -> newsrc translation table and NNTP-server\n" "# shortname list for %s %s\n" "#\n" "# the format of this file is\n" "# ...\n" "#\n" "# if is given without path, $HOME is assumed as its location\n" "#\n" "# examples:\n" "# news.tin.org .newsrc-tin.org tinorg\n" "# news.example.org /tmp/nrc-ex example ex\n" "#\n" msgstr "" "# NNTP-server -> newsrc 翻译表格和 NNTP-server\n" "# 简称清单用于 %s %s\n" "#\n" "# 这个文件的格式是\n" "# <简称>…\n" "#\n" "# 如果提供的 不含路径，$HOME 会被假设为它所在的位置\n" "#\n" "# 范例：\n" "# news.tin.org .newsrc-tin.org tinorg\n" "# news.example.org /tmp/nrc-ex example ex\n" "#\n" #: src/lang.c:975 msgid "NULL" msgstr "NULL" #: src/lang.c:977 msgid "Only" msgstr "只有" #: src/lang.c:979 msgid "Options Menu" msgstr "选项功能表" #: src/lang.c:980 msgid "Options Menu Commands" msgstr "选项功能表命令" #: src/lang.c:981 #, fuzzy, c-format #| msgid "Option not enabled. Recompile with %s." msgid "Option not enabled. Recompile with %s.%s\n" msgstr "选项未启用。重新以 %s 编译。" #: src/lang.c:984 #, c-format msgid "Error in regex: %s at pos. %d '%s'" msgstr "在正则表达式 %s 的位置 %d 发生错误：‘%s’" #: src/lang.c:985 #, c-format msgid "Error in regex: pcre internal error %d" msgstr "在正则表达式中发生错误：pcre 内部错误 %d" #: src/lang.c:987 #, c-format msgid "Error in regex: study - pcre internal error %s" msgstr "在正则表达式中发生错误：study - pcre 内部错误 %s" #: src/lang.c:989 msgid "Post a followup..." msgstr "跟贴…" #. TODO: replace hard coded key-name in txt_post_error_ask_postpone #: src/lang.c:991 msgid "" "An error has occurred while posting the article. If you think that this\n" "error is temporary or otherwise correctable, you can postpone the article\n" "and pick it up again with ^O later.\n" msgstr "" "张贴文章时发生了错误。如果您觉得这个\n" "错误是暂时或是可改正的，您可以搁置文章\n" "并于稍后以 ^O 再次取出它。\n" #: src/lang.c:994 msgid "Posted articles history" msgstr "张贴文章历史记录" #: src/lang.c:995 #, fuzzy #| msgid "Attributes Menu Commands" msgid "Posted Articles Menu Commands" msgstr "属性功能表指令" #: src/lang.c:996 msgid "Lookup failed" msgstr "" #: src/lang.c:997 msgid "Operation not available for replies by mail" msgstr "" #: src/lang.c:998 #, fuzzy #| msgid "Posted articles history" msgid "Already in posted articles history level" msgstr "张贴文章历史记录" #: src/lang.c:999 #, c-format msgid "Post to newsgroup(s) [%s]> " msgstr "张贴到新闻群组 [%s]>" #: src/lang.c:1000 msgid "-- post processing started --" msgstr "-- 张贴处理开始 --" #: src/lang.c:1001 msgid "-- post processing completed --" msgstr "-- 张贴处理完成 --" #: src/lang.c:1002 #, c-format msgid "Post subject [%s]> " msgstr "张贴主旨 [%s]>" #: src/lang.c:1003 msgid "# Summary of mailed/posted messages viewable by 'W' command from within tin.\n" msgstr "# 邮寄/张贴的消息概要可以在 tin 之中经由‘W’命令来查看。\n" #: src/lang.c:1004 msgid "Posting article..." msgstr "张贴文章…" #: src/lang.c:1006 #, fuzzy, c-format #| msgid "Posting article..." msgid "Posting failed (%s)" msgstr "张贴文章…" #: src/lang.c:1008 #, c-format msgid "Posting: %.*s ..." msgstr "张贴：%.*s…" #: src/lang.c:1009 #, c-format msgid "Post postponed articles [%%s]? (%s/%s/%s/%s/%s): " msgstr "张贴被搁置的文章 [%%s]？(%s/%s/%s/%s/%s)：" #: src/lang.c:1010 #, c-format msgid "Hot %s" msgstr "热门 %s" #: src/lang.c:1011 #, c-format msgid "Tagged %s" msgstr "已标记 %s" #: src/lang.c:1012 #, c-format msgid "Untagged %s" msgstr "已取消标记 %s" #: src/lang.c:1014 #, c-format msgid "Preparing for filtering on Path header (%d/%d)..." msgstr "" #: src/lang.c:1016 #, fuzzy #| msgid "Processing attributes... " msgid "Processing attributes..." msgstr "处理属性…" #: src/lang.c:1017 msgid "Processing mail messages marked for deletion." msgstr "处理标记为删除的邮件消息。" #: src/lang.c:1018 msgid "Processing saved articles marked for deletion." msgstr "处理标记为删除的已保存文章。" #: src/lang.c:1019 #, c-format msgid "Accept Followup-To? %s=post, %s=ignore, %s=quit: " msgstr "接受跟贴？%s=张贴，%s=忽略，%s=离开：" #: src/lang.c:1020 msgid "Article unchanged, abort mailing?" msgstr "文章未变更，放弃邮寄？" #: src/lang.c:1021 #, c-format msgid "Do you want to see postponed articles (%d)?" msgstr "您要看到搁置的文章 (%d) 吗？" #: src/lang.c:1023 msgid "Add quick kill filter?" msgstr "加入快速砍除筛选器？" #: src/lang.c:1024 msgid "Add quick selection filter?" msgstr "加入快速选择筛选器？" #: src/lang.c:1025 msgid "Do you really want to quit?" msgstr "您真的要离开吗？" #: src/lang.c:1026 #, c-format msgid "%s=edit cancel message, %s=quit, %s=delete (cancel) [%%s]: " msgstr "%s=编辑取消消息，%s=离开，%s=删除 (取消) [%%s]：" #: src/lang.c:1027 msgid "You have tagged articles in this group - quit anyway?" msgstr "您已在这个群组中标记文章 - 无论如何都要离开？" #: src/lang.c:1028 #, c-format msgid "%s=quit, %s=edit, %s=postpone: " msgstr "%s=离开，%s=编辑，%s=搁置：" #: src/lang.c:1029 #, fuzzy, c-format #| msgid "%s=quit %s=edit %s=save kill description: " msgid "%s=quit, %s=edit, %s=save kill description: " msgstr "%s=离开 %s=编辑 %s=保存砍除描述：" #: src/lang.c:1030 #, fuzzy, c-format #| msgid "%s=quit %s=edit %s=save select description: " msgid "%s=quit, %s=edit, %s=save select description: " msgstr "%s=离开 %s=编辑 %s=保存选取描述：" #: src/lang.c:1031 msgid "Do you really want to quit without saving your configuration?" msgstr "您真的要离开却不保存您的组态吗？" #: src/lang.c:1033 #, fuzzy #| msgid "Invalid range - valid are '0-9.$' eg. 1-$" msgid "Invalid range - valid are '0-9.$' e.g. 1-$" msgstr "无效的范围 - 有效是‘0-9.$’例如：1-$" #: src/lang.c:1035 msgid "Do you want to abort this operation?" msgstr "您要放弃这个操作吗？" #: src/lang.c:1036 msgid "Do you want to exit tin immediately?" msgstr "您要马上离开 tin 吗？" #: src/lang.c:1038 msgid "Reading ('q' to quit)..." msgstr "读取 (‘q’表示离开)…" #: src/lang.c:1039 #, fuzzy, c-format #| msgid "Reading %sarticles..." msgid "Reading %s articles..." msgstr "读取 %s 篇文章…" #: src/lang.c:1040 #, fuzzy, c-format #| msgid "Reading %sattributes file...\n" msgid "Reading %sattributes file: %s\n" msgstr "读取 %s 属性文件…\n" #: src/lang.c:1041 #, fuzzy, c-format #| msgid "Reading %sconfig file...\n" msgid "Reading %sconfig file: %s\n" msgstr "读取 %s 组态文件…\n" #: src/lang.c:1042 #, fuzzy, c-format #| msgid "Reading filter file...\n" msgid "Reading filter file: %s\n" msgstr "读取筛选器文件…\n" #: src/lang.c:1044 msgid "reading from local spool" msgstr "" #: src/lang.c:1046 #, fuzzy, c-format #| msgid "Rereading %s..." msgid "Reading %s\n" msgstr "重新读取 %s…" #: src/lang.c:1047 #, c-format msgid "Reading %s groups..." msgstr "读取 %s 群组…" #: src/lang.c:1048 #, fuzzy, c-format #| msgid "Reading input history file...\n" msgid "Reading input history file: %s\n" msgstr "读取输入历史文件…\n" #: src/lang.c:1049 #, fuzzy, c-format #| msgid "Reading keymap file...\n" msgid "Reading keymap file: %s\n" msgstr "读取 keymap 文件…\n" #: src/lang.c:1050 msgid "Reading groups from active file... " msgstr "从现用文件读取群组…" #: src/lang.c:1051 msgid "Reading groups from newsrc file... " msgstr "从 newsrc 文件读取群组…" #: src/lang.c:1052 msgid "Reading newsgroups file... " msgstr "读取新闻群组文件…" #: src/lang.c:1053 #, fuzzy, c-format #| msgid "Reading newsrc file..." msgid "Reading newsrc file: %s" msgstr "读取 newsrc 文件…" #: src/lang.c:1054 msgid "References: line " msgstr "References: 行 " #: src/lang.c:1056 #, c-format msgid "(%d:%02d remaining)" msgstr "(%d:%02d 还剩余)" #: src/lang.c:1058 #, c-format msgid "Bogus group %s removed." msgstr "假造的群组 %s 已移除。" #: src/lang.c:1059 #, fuzzy #| msgid "Removed from the previous rule: " msgid "Removed from this rule: " msgstr "已从上一个规则移除：" #: src/lang.c:1060 #, c-format msgid "Error: rename %s to %s" msgstr "错误：重命名 %s 为 %s" #: src/lang.c:1061 msgid "Reply to author..." msgstr "回复给作者…" #: src/lang.c:1062 msgid "Repost" msgstr "重新张贴" #: src/lang.c:1063 msgid "Reposting article..." msgstr "重新张贴文章…" #: src/lang.c:1064 #, c-format msgid "Repost article(s) to group(s) [%s]> " msgstr "重新张贴文章到群组 [%s]>" #: src/lang.c:1065 msgid "Reset newsrc?" msgstr "重置 newsrc？" #: src/lang.c:1066 msgid "Responses have been directed to the following newsgroups" msgstr "回应已被导向下列新闻群组" #: src/lang.c:1067 #, c-format msgid "Responses have been directed to poster. %s=mail, %s=post, %s=quit: " msgstr "回应已被导向张贴者。%s=邮寄，%s=张贴，%s=离开：" #: src/lang.c:1068 msgid "Press to continue..." msgstr "按下 以继续…" #: src/lang.c:1070 #, fuzzy, c-format #| msgid "Score" msgid "Score: %s" msgstr "分数" #: src/lang.c:1071 #, c-format msgid "Select From [%s] (y/n): " msgstr "选取自 [%s] (y/n)：" #: src/lang.c:1072 msgid "Select Lines: (num): " msgstr "选取多行：(num)：" #: src/lang.c:1073 msgid "Auto-select Article Menu" msgstr "自动选取文章菜单" #: src/lang.c:1074 #, fuzzy, c-format #| msgid "Select Msg-Id [%s] (f/l/o/n): " msgid "Select Msg-ID [%s] (f/l/o/n): " msgstr "选取 Msg-Id [%s] (f/l/o/n)：" #: src/lang.c:1075 msgid "Select pattern scope: " msgstr "选取模式范围：" #: src/lang.c:1076 #, c-format msgid "Select Subject [%s] (y/n): " msgstr "选取主旨 [%s] (y/n)：" #: src/lang.c:1077 msgid "Select text pattern : " msgstr "选取文本模式：" #: src/lang.c:1078 msgid "Select time in days : " msgstr "选取时间天数 ：" #: src/lang.c:1079 msgid "[k]" msgstr "" #: src/lang.c:1080 msgid "[T]" msgstr "" #: src/lang.c:1081 msgid " R" msgstr " R" #: src/lang.c:1082 #, c-format msgid "" "# %s server configuration file\n" "# This file was automatically saved by %s %s %s (\"%s\")\n" "#\n" "# Do not edit while %s is running, since all your changes to this file\n" "# will be overwritten when you leave %s.\n" "# Do not edit at all if you don't know what you do.\n" "############################################################################\n" "\n" msgstr "" "# %s 服务器组态文件\n" "# 这个文件是自动由 %s %s %s (“%s”) 所保存\n" "#\n" "# 当 %s 正在运行时请不要编辑，因为您所有对这个文件的变更\n" "# 将于您离开 %s 时被覆写。\n" "# 如果您不知道您在做什么，请不要编辑任何东西。\n" "############################################################################\n" "\n" #: src/lang.c:1088 msgid "Showing unread groups only" msgstr "只显示未读群组" #: src/lang.c:1089 msgid "Subject: line (ignore case) " msgstr "Subject: 行 (忽略大小写) " #: src/lang.c:1090 msgid "Subject: line (case sensitive)" msgstr "Subject: 行 (大小写相符)" #: src/lang.c:1091 msgid "Save" msgstr "保存" #: src/lang.c:1092 #, c-format msgid "Save '%s' (%s/%s)?" msgstr "保存‘%s’(%s/%s)？" #: src/lang.c:1093 msgid "Save configuration before continuing?" msgstr "继续之前先保存组态？" #: src/lang.c:1094 msgid "Save filename> " msgstr "保存文件名>" #: src/lang.c:1095 msgid "Saved" msgstr "已保存" #: src/lang.c:1096 #, fuzzy, c-format #| msgid "%4d unread (%4d hot) %s in %s\n" msgid "%s unread (%s hot) %s in %s\n" msgstr "%4d 未读 (%4d 热门) %s 于 %s\n" #: src/lang.c:1097 #, c-format msgid "Saved %s...\n" msgstr "已保存 %s…\n" #: src/lang.c:1098 msgid "Nothing was saved" msgstr "没有任何东西被保存" #: src/lang.c:1099 #, c-format msgid "" "\n" "%s %d %s from %d %s\n" msgstr "" "\n" "%s %d %s 来自 %d %s\n" #: src/lang.c:1100 #, c-format msgid "-- %s saved to %s%s --" msgstr "-- %s 保存到 %s%s --" #: src/lang.c:1101 #, c-format msgid "-- %s saved to %s - %s --" msgstr "-- %s 保存到 %s - %s --" #: src/lang.c:1102 msgid "Saving..." msgstr "保存中…" #: src/lang.c:1103 #, c-format msgid "%s: Screen initialization failed" msgstr "%s：屏幕初始化失败" #: src/lang.c:1105 #, c-format msgid "%s: screen is too small\n" msgstr "%s：屏幕太小\n" #: src/lang.c:1107 #, fuzzy, c-format #| msgid "screen is too small, %s is exiting\n" msgid "screen is too small, %s is exiting" msgstr "屏幕太小，%s 正在离开\n" #: src/lang.c:1108 msgid "Delete scope?" msgstr "删除范围？" #: src/lang.c:1109 msgid "Enter scope> " msgstr "输入范围>" #: src/lang.c:1110 msgid "Select new position> " msgstr "选取新位置>" #: src/lang.c:1111 msgid "New position cannot be a global scope" msgstr "新位置不可是全局范围" #: src/lang.c:1112 msgid "Global scope, operation not allowed" msgstr "全局范围，操作不允许" #: src/lang.c:1113 msgid "Rename scope> " msgstr "重命名范围>" #: src/lang.c:1114 msgid "Select scope> " msgstr "选取范围>" #: src/lang.c:1115 msgid "Scopes Menu" msgstr "范围菜单" #: src/lang.c:1116 msgid "Scopes Menu Commands" msgstr "范围功能表指令" #: src/lang.c:1117 #, c-format msgid "Search backwards [%s]> " msgstr "向后搜索 [%s]>" #: src/lang.c:1118 #, c-format msgid "Search body [%s]> " msgstr "搜索内文 [%s]>" #: src/lang.c:1119 #, c-format msgid "Search forwards [%s]> " msgstr "向前搜索 [%s]>" #: src/lang.c:1120 msgid "Searching..." msgstr "搜索中…" #: src/lang.c:1121 #, c-format msgid "Searching article %d of %d ('q' to abort)..." msgstr "搜索文章 %2$d 中的 %1$d (‘q’以放弃)…" #: src/lang.c:1122 msgid "Select article> " msgstr "选取文章>" #: src/lang.c:1123 msgid "Select option number before text or use arrow keys and . 'q' to quit." msgstr "选取文本前方的选项数字或使用方向键和 。‘q’以离开。" #: src/lang.c:1124 msgid "Select group> " msgstr "选取群组>" #: src/lang.c:1125 #, c-format msgid "Enter selection pattern [%s]> " msgstr "输入选择模式 [%s]>" #: src/lang.c:1126 msgid "Select thread> " msgstr "选取帖子> " #: src/lang.c:1127 #, fuzzy, c-format #| msgid "%s %s %s (\"%s\") [%s]: send a DETAILED bug report to %s\n" msgid "%s %s %s (\"%s\"): send a DETAILED bug report to %s\n" msgstr "%s %s %s (“%s”) [%s]：发送详细的错误报告给 %s\n" #: src/lang.c:1128 msgid "servers active-file" msgstr "服务器目前文件" #: src/lang.c:1129 #, c-format msgid "Skipped %s" msgstr "" #: src/lang.c:1130 msgid "Cannot move into new newsgroups. Subscribe first..." msgstr "无法移入新的新闻群组。请先订阅…" #: src/lang.c:1131 msgid "" msgstr "" #: src/lang.c:1132 #, c-format msgid "Starting: (%s)" msgstr "开始：(%s)" #: src/lang.c:1133 #, c-format msgid "List Thread (%d of %d)" msgstr "列出讨论串 (%2$d 中的 %1$d)" #: src/lang.c:1134 #, c-format msgid "Thread (%.*s)" msgstr "讨论串 (%.*s)" #: src/lang.c:1135 msgid "Enter wildcard subscribe pattern> " msgstr "输入通配符订阅模式>" #: src/lang.c:1136 #, c-format msgid "subscribed to %d groups" msgstr "已订阅 %d 群组" #: src/lang.c:1137 #, c-format msgid "Subscribed to %s" msgstr "已订阅 %s" #: src/lang.c:1138 msgid "Subscribing... " msgstr "订阅…" #: src/lang.c:1139 #, c-format msgid "Repost or supersede article(s) [%%s]? (%s/%s/%s): " msgstr "重新张贴或取代文章 [%%s]？(%s/%s/%s)：" #: src/lang.c:1140 #, c-format msgid "Supersede article(s) to group(s) [%s]> " msgstr "取代文章于群组 [%s]>" #: src/lang.c:1141 msgid "Superseding article ..." msgstr "取代文章…" #: src/lang.c:1142 #, c-format msgid "" "\n" "Stopped. Type 'fg' to restart %s\n" msgstr "" "\n" "已停止。输入‘fg’以重新启动 %s\n" #: src/lang.c:1144 #, c-format msgid "%d days" msgstr "%d 天" #: src/lang.c:1145 msgid "" msgstr "" #: src/lang.c:1146 msgid "TeX " msgstr "TeX " #: src/lang.c:1147 #, fuzzy, c-format #| msgid "Version: %s %s release %s (\"%s\")\n" msgid "Version: %s %s release %s (\"%s\")" msgstr "版本：%s %s 发布 %s (“%s”)\n" #: src/lang.c:1148 msgid "# Default action/prompt strings\n" msgstr "# 缺省的动作/提示字串\n" #: src/lang.c:1149 msgid "" "# Defaults for quick (1 key) kill & auto-selection filters\n" "# header=NUM 0,1=Subject: 2,3=From: 4=Message-ID: & full References: line\n" "# 5=Message-ID: & last References: entry only\n" "# 6=Message-ID: entry only 7=Lines:\n" "# global=ON/OFF ON=apply to all groups OFF=apply to current group\n" "# case=ON/OFF ON=filter case sensitive OFF=ignore case\n" "# expire=ON/OFF ON=limit to default_filter_days OFF=don't ever expire\n" msgstr "" "# 用于快速 (1 键) 砍除 & 自动选择的筛选器默认值\n" "# header=NUM 0,1=Subject: 2,3=From: 4=Message-ID: & 全部 References: 行\n" "# 5=只有 Message-ID: & 最后一笔 References: 条目\n" "# 6=只有 Message-ID: 条目 7=Lines: \n" "# global=ON/OFF ON=套用于所有群组 OFF=套用到目前的群组\n" "# case=ON/OFF ON=筛选器大小写须相符 OFF=忽略大小写\n" "# expire=ON/OFF ON=限制到 default_filter_days OFF=不会过期\n" #: src/lang.c:1162 msgid "# If ON use print current subject or newsgroup description in the last line\n" msgstr "# 如果为 ON 就印出目前的主旨或最后一行中的新闻群组描述\n" #: src/lang.c:1163 msgid "# Host & time info used for detecting new groups (don't touch)\n" msgstr "# 主机 & 时间信息用于侦测新群组 (不影响)\n" #: src/lang.c:1164 msgid "There is no news\n" msgstr "没有任何新闻\n" #: src/lang.c:1165 msgid "Thread" msgstr "讨论串" #: src/lang.c:1166 msgid "Thread Level Commands" msgstr "讨论串层级命令" #: src/lang.c:1167 msgid "Thread deselected" msgstr "讨论串已取消选取" #: src/lang.c:1168 msgid "Thread selected" msgstr "讨论串已选取" #: src/lang.c:1169 msgid "thread" msgstr "讨论串" #: src/lang.c:1170 #, c-format msgid "Thread %4s of %4s" msgstr "讨论串 %2$4s 中的 %1$4s" #: src/lang.c:1171 msgid "Threading articles..." msgstr "讨论串文章…" #: src/lang.c:1172 #, fuzzy #| msgid "Threading articles..." msgid "Threading by multipart" msgstr "讨论串文章…" #: src/lang.c:1175 msgid "" msgstr "" #: src/lang.c:1176 msgid "" msgstr "" #: src/lang.c:1177 msgid "" msgstr "" #: src/lang.c:1178 msgid "" msgstr "" #: src/lang.c:1179 #, c-format msgid "%s handshake done: %s\n" msgstr "" #: src/lang.c:1182 #, fuzzy, c-format #| msgid "Slrnface failed: %s." msgid "TLS handshake failed: %s (%d)\n" msgstr "Slrnface 失败：%s。" #: src/lang.c:1183 #, c-format msgid "TLS peer verification failed: %s\n" msgstr "" #: src/lang.c:1184 #, c-format msgid "TLS peer verification failed, continuing anyway as requested: %s\n" msgstr "" #: src/lang.c:1185 msgid "" msgstr "" #: src/lang.c:1186 msgid "unexpected certificate verification status!" msgstr "" #: src/lang.c:1189 #, c-format msgid "" "TLS peer verification failed: %s.\n" "Continuing anyway as requested.\n" msgstr "" #: src/lang.c:1192 #, c-format msgid "TLS handshake done: %s\n" msgstr "" #: src/lang.c:1195 #, fuzzy, c-format #| msgid "Slrnface failed: %s." msgid "TLS handshake failed: %s\n" msgstr "Slrnface 失败：%s。" #: src/lang.c:1198 #, c-format msgid "Toggled word highlighting %s" msgstr "已切换字词高亮度显示 %s" #: src/lang.c:1199 msgid "Toggled rot13 encoding" msgstr "已切换 rot13 编码" #: src/lang.c:1200 #, fuzzy, c-format #| msgid "Toggled german TeX encoding %s" msgid "Toggled German TeX encoding %s" msgstr "已切换德语 TeX 编码 %s" #: src/lang.c:1201 #, c-format msgid "Toggled tab-width to %d" msgstr "已切换跳格宽度为 %d" #: src/lang.c:1203 #, c-format msgid "%d Trying to dotlock %s" msgstr "%d 尝试点锁定 %s" #: src/lang.c:1204 #, c-format msgid "%d Trying to lock %s" msgstr "%d 尝试锁定 %s" #: src/lang.c:1206 #, c-format msgid "%s=help" msgstr "" #: src/lang.c:1208 msgid "Unlimited" msgstr "没有限制" #: src/lang.c:1209 msgid "Enter wildcard unsubscribe pattern> " msgstr "输入取消订阅的通配符模式>" #: src/lang.c:1210 #, c-format msgid "Error decoding %s : %s" msgstr "解码 %s 时发生错误：%s" #: src/lang.c:1211 msgid "No end." msgstr "没有结束。" #: src/lang.c:1212 #, c-format msgid "%s successfully decoded." msgstr "%s 已成功解码。" #: src/lang.c:1214 msgid "unchanged" msgstr "未变更" #: src/lang.c:1216 msgid "(unknown)" msgstr "(不明)" #: src/lang.c:1218 #, fuzzy #| msgid "Unknown error." msgid "unknown error" msgstr "不明错误。" #: src/lang.c:1220 msgid "unread" msgstr "未读" #: src/lang.c:1221 #, c-format msgid "unsubscribed from %d groups" msgstr "已从 %d 群组取消订阅" #: src/lang.c:1222 #, c-format msgid "Unsubscribed from %s" msgstr "已从 %s 取消订阅" #: src/lang.c:1223 msgid "Unsubscribing... " msgstr "取消订阅…" #: src/lang.c:1224 msgid "Unthreading articles..." msgstr "展开讨论串文章…" #: src/lang.c:1225 msgid "Updated" msgstr "已更新" #: src/lang.c:1226 msgid "Updating" msgstr "更新" #: src/lang.c:1227 msgid "URL Menu" msgstr "网址菜单" #: src/lang.c:1228 msgid "URL Menu Commands" msgstr "网址功能表指令" #: src/lang.c:1229 #, c-format msgid "Opening %s" msgstr "打开 %s" #: src/lang.c:1230 msgid "Select URL> " msgstr "选取网址>" #: src/lang.c:1231 msgid "No URLs in this article" msgstr "在这篇文章中没有网址" #: src/lang.c:1233 #, c-format msgid "SASL MECHS : %s\n" msgstr "" #: src/lang.c:1234 #, c-format msgid "SASL MECH used: %s\n" msgstr "" #: src/lang.c:1236 msgid " -c mark all news as read in subscribed newsgroups (batch mode)" msgstr " -c 标记所有在订阅新闻群组中的新闻为已读 (批次模式)" #: src/lang.c:1237 msgid " -Z return status indicating if any unread news (batch mode)" msgstr " -Z 返回状态指出是否有任何未读新闻 (批次模式)" #: src/lang.c:1238 msgid " -q don't check for new newsgroups" msgstr " -q 不检查新的新闻群组" #: src/lang.c:1239 msgid " -X don't save any files on quit" msgstr " -X 离开时不保存任何文件" #: src/lang.c:1240 msgid " -d don't show newsgroup descriptions" msgstr " -d 不显示新闻群组的描述" #: src/lang.c:1241 msgid " -G limit get only limit articles/group" msgstr " -G limit 只提取有限的文章/群组" #: src/lang.c:1242 #, c-format msgid " -H help information about %s" msgstr " -H %s 相关的说明信息" #: src/lang.c:1243 msgid " -h this help message" msgstr " -h 这份说明消息" #: src/lang.c:1244 #, c-format msgid " -I dir news index file directory [default=%s]" msgstr " -I dir 新闻索引文件目录 [缺省=%s]" #: src/lang.c:1246 msgid " -L msgid show the message with that Message-ID" msgstr "" #: src/lang.c:1248 msgid " -u update index files (batch mode)" msgstr " -u 更新索引文件 (批次模式)" #: src/lang.c:1249 #, c-format msgid " -m dir mailbox directory [default=%s]" msgstr " -m dir 信箱目录 [缺省=%s]" #: src/lang.c:1250 #, c-format msgid "" "\n" "Mail bug reports/comments to %s" msgstr "" "\n" "邮寄错误报告/评论给 %s" #: src/lang.c:1251 msgid " -N mail new news to your posts (batch mode)" msgstr " -N 邮寄对于您的张贴的新闻 (批次模式)" #: src/lang.c:1252 msgid " -M user mail new news to specified user (batch mode)" msgstr " -M user 邮寄新的新闻给指定用户 (批次模式)" #: src/lang.c:1253 #, c-format msgid " -f file subscribed to newsgroups file [default=%s]" msgstr " -f file 订阅新闻群组文件 [缺省=%s]" #: src/lang.c:1255 #, c-format msgid " -t sec override nntp_read_timeout_secs setting [default=%d]" msgstr "" #: src/lang.c:1257 msgid " -x no-posting mode" msgstr " -x 不许张贴模式" #: src/lang.c:1258 msgid " -w post an article and exit" msgstr " -w 张贴文章然后离开" #: src/lang.c:1259 msgid " -o post all postponed articles and exit" msgstr " -o 张贴所有搁置的文章然后离开" #: src/lang.c:1260 msgid " -R read news saved by -S option" msgstr " -R 读取由 -S 选项所保存的新闻" #: src/lang.c:1261 #, c-format msgid " -s dir save news directory [default=%s]" msgstr " -s dir 保存新闻目录 [缺省=%s]" #: src/lang.c:1262 msgid " -S save new news for later reading (batch mode)" msgstr " -S 保存新的新闻以便稍后读取 (批次模式)" #: src/lang.c:1263 msgid " -z start if any unread news" msgstr " -z 如果有任何未读新闻才打开" #: src/lang.c:1264 #, c-format msgid "" "A Usenet reader.\n" "\n" "Usage: %s [options] [newsgroup[,...]]" msgstr "" "新闻群组阅读器。\n" "\n" "用法：%s [选项] [新闻群组[,...]]" #: src/lang.c:1265 msgid " -v verbose output for batch mode options" msgstr " -v 详细输出用于批次模式选项" #: src/lang.c:1266 msgid " -V print version & date information" msgstr " -V 印出版本 & 日期信息" #: src/lang.c:1267 msgid "Use MIME display program for this message?" msgstr "这个消息使用 MIME 显示程序？" #: src/lang.c:1268 #, fuzzy, c-format #| msgid "%s only useful without batch mode operations\n" msgid "%s only useful without batch mode operations.%s\n" msgstr "%s 只有在非批次模式操作时有用\n" #: src/lang.c:1269 #, fuzzy, c-format #| msgid "%s only useful for batch mode operations\n" msgid "%s only useful for batch mode operations.%s\n" msgstr "%s 只有在批次模式操作时有用\n" #: src/lang.c:1270 #, fuzzy, c-format #| msgid "%s only useful for batch mode operations\n" msgid "%s only useful for batch or debug mode operations.%s\n" msgstr "%s 只有在批次模式操作时有用\n" #: src/lang.c:1271 #, fuzzy, c-format #| msgid "Useless combination %s and %s. Ignoring %s.\n" msgid "Useless combination %s and %s. Ignoring %s.%s\n" msgstr "无用的组合 %s 和 %s。忽略 %s。\n" #: src/lang.c:1272 msgid "uuencoded file" msgstr "" #: src/lang.c:1273 #, fuzzy #| msgid "incomplete " msgid "incomplete uuencoded file" msgstr "不完整的 " #: src/lang.c:1276 #, c-format msgid "Valid not after : %s\n" msgstr "" #: src/lang.c:1277 #, c-format msgid "Valid not before: %s\n" msgstr "" #: src/lang.c:1279 #, fuzzy, c-format #| msgid "" #| "\n" #| "%s%d out of range (0 - %d). Reset to 0" msgid "%s %s out of range (%d - %d). Ignored." msgstr "" "\n" "%s%d 超出范围 (0 - %d)。重置为 0" #: src/lang.c:1280 #, fuzzy, c-format #| msgid "" #| "\n" #| "%s%d out of range (0 - %d). Reset to 0" msgid "%s %d out of range (0 - %d). Reset to 0." msgstr "" "\n" "%s%d 超出范围 (0 - %d)。重置为 0" #: src/lang.c:1281 #, c-format msgid "View '%s' (%s/%s)?" msgstr "查看‘%s’(%s/%s)？" #: src/lang.c:1283 #, c-format msgid "" "\n" "Warning: posting exceeds %d columns. Line %d is the first long one:\n" "%-100s\n" msgstr "" "\n" "警告：张贴超出 %d 字段。第 %d 行是第一个长行：\n" "%-100s\n" #: src/lang.c:1284 msgid "" "\n" "Warning: article unchanged after editing\n" msgstr "" "\n" "警告：文章编辑之后未变更\n" #: src/lang.c:1285 msgid "" "\n" "Warning: \"Subject:\" contains only whitespaces.\n" msgstr "" "\n" "警告：“ Subject: ”只含空白。\n" #: src/lang.c:1286 msgid "" "\n" "Warning: \"Subject:\" begins with \"Re: \" but there are no \"References:\".\n" msgstr "" "\n" "警告：“ Subject: ”以“Re：”开始但是没有“ References: ”。\n" #: src/lang.c:1288 msgid "" "\n" "Warning: Article has \"References:\" but \"Subject:\" does not begin\n" " with \"Re: \" and does not contain \"(was:\".\n" msgstr "" "\n" "警告：文章有“ References: ”但是“ Subject: ”并非\n" " 以“Re:”开始且不包含“(was:”。\n" #: src/lang.c:1291 #, fuzzy #| msgid "" #| "\n" #| "Warning: \"Subject:\" contains only whitespaces.\n" msgid "" "\n" "Warning: \"Subject:\" contains only \"Re:\".\n" msgstr "" "\n" "警告：“ Subject: ”只含空白。\n" #: src/lang.c:1292 msgid "" "Read carefully!\n" "\n" " You are about to cancel an article seemingly written by you. This will wipe\n" " the article from most news servers throughout the world, but there is no\n" " guarantee that it will work.\n" "\n" "This is the article you are about to cancel:\n" "\n" msgstr "" "请仔细阅读！\n" "\n" " 您即将取消一篇似乎由您编写的文章。这将使\n" " 文章从全世界大部分的新闻服务器中抹除，但是并不保证\n" " 它一定会如此。\n" "\n" "这是您即将取消的文章：\n" "\n" #: src/lang.c:1296 msgid "" "\n" "Warning: Undesired Distribution \"world\" used.\n" msgstr "" #: src/lang.c:1297 msgid "" "\n" "Warning: You are using a non-plain transfer encoding (such as base64 or\n" " quoted-printable) and an external inews program to submit your\n" " article. If a signature is appended by that inews program it will\n" " not be encoded properly.\n" msgstr "" "\n" "警告：您正在使用非纯文本的转送编码 (像是 base64 或\n" " quoted-printable) 以及某个外部 inews 程序来提交您的\n" " 文章。如果某个签名被该 inews 程序所附加，它将\n" " 无法被适当地编码。\n" #: src/lang.c:1303 #, fuzzy, c-format #| msgid "" #| "Line %d is longer than 998 octets and should be folded, but\n" #| "encoding is neither set to %s nor to %s\n" msgid "" "\n" "Line %d is longer than %d octets and should be folded, but encoding\n" "is neither set to %s nor to %s.\n" msgstr "" "第 %d 行长度超过 998 字节而应该被折叠，但是\n" "编码未被设置为 %s 亦非 %s\n" #: src/lang.c:1307 #, fuzzy, c-format #| msgid "" #| "Line %d is longer than 998 octets and should be folded, but\n" #| "encoding is set to %s without enabling MIME_BREAK_LONG_LINES or\n" #| "posting doesn't contain any 8bit chars and thus folding won't happen\n" msgid "" "\n" "Line %d is longer than %d octets and should be folded, but encoding\n" "is set to %s without enabling MIME_BREAK_LONG_LINES or\n" "posting doesn't contain any 8bit chars and thus folding won't happen.\n" msgstr "" "第 %d 行长度超过 998 字节而应该被折叠，但是\n" "编码被设置为 %s 而未启用 MIME_BREAK_LONG_LINES 或是\n" "贴文不包含任何 8 比特字符，因而无法发生折叠\n" #: src/lang.c:1311 #, fuzzy, c-format #| msgid "" #| "Line %d is longer than 998 octets and should be folded, but\n" #| "encoding is not set to %s\n" msgid "" "\n" "Line %d is longer than %d octets and should be folded, but encoding\n" "is not set to %s.\n" msgstr "" "第 %d 行长度超过 998 字节而，但是\n" "编码未被设置为 %s\n" #: src/lang.c:1314 msgid "" "\n" "Warning: \"example\" is a reserved hierarchy!\n" msgstr "" "\n" "警告：“example”是被保留的阶层结构！\n" #: src/lang.c:1315 #, c-format msgid "" "\n" "\n" "You are upgrading to tin %s from an earlier version.\n" "Some values in your %s file have changed!\n" "Read WHATSNEW, etc...\n" msgstr "" "\n" "\n" "您正在从较早的版本升级到 tin %s。\n" "在您 %s 文件中的某些值已有变更！\n" "请参阅 WHATSNEW …等等\n" #: src/lang.c:1317 #, c-format msgid "" "\n" "\n" "You are downgrading to tin %s from a more recent version!\n" "Some values in your %s file may be ignored, others might have changed!\n" msgstr "" "\n" "\n" "您正在从较新的版本降级到 tin %s！\n" "在您 %s 文件中的某些值可能会被忽略，其他值也可能已有变更！\n" #: src/lang.c:1320 #, c-format msgid "" "Warning: tin wrote fewer groups to your\n" "\t%s\n" "than it read at startup. If you didn't unsubscribe from %ld %s during\n" "this session this indicates an error and you should backup your %s\n" "before you start tin once again!\n" msgstr "" "警告：tin 写入您的\n" "\t%s 中的群组要比\n" "它于启动时读取的还少。如果您在这个作业阶段期间\n" "并未取消订阅 %ld %s，那么这就代表发生了错误，而您应该\n" "于再次启动 tin 之前先备份您的 %s！\n" #: src/lang.c:1324 #, c-format msgid "" "\n" "Warning: The article has multiple addresses in \"%s\".\n" " This is at least uncommon.\n" msgstr "" #: src/lang.c:1327 #, c-format msgid "" "\n" "Warning: With multiple addresses in \"From\", a \"Sender\"-header is\n" " required, but its generation is deactivated by the global\n" " configuration \"disable_sender=ON\" in\n" " \"%s\".\n" msgstr "" #: src/lang.c:1332 #, c-format msgid "" "\n" "Warning: Found %d '-- \\n' lines, this may confuse some people.\n" msgstr "" "\n" "警告：找到 %d 个‘-- \\n’行，这也许会使某些人感到困惑。\n" #: src/lang.c:1333 #, c-format msgid "Warning: Only %d out of %d articles were saved" msgstr "警告：只有 %2$d 中的 %1$d 篇文章被保存" #: src/lang.c:1334 #, c-format msgid "" "\n" "Warning: Your signature is longer than %d lines. Since signatures usually do\n" " not transport any useful information, they should be as short as\n" " possible.\n" msgstr "" "\n" "警告：您的签名长度已超过 %d 行。 由于签名通常\n" " 不会用来传输任何有用的信息，它们应该要愈短愈好。\n" #: src/lang.c:1338 #, c-format msgid "Warning: this mail address may contain a spamtrap. %s=continue, %s=abort? " msgstr "警告：这个邮件地址可能包含垃圾陷阱。%s=继续，%s=放弃？" #: src/lang.c:1339 #, c-format msgid "" "Warning: line %d contains unprintable chars:\n" "%s\n" msgstr "" #: src/lang.c:1340 msgid "" "\n" "Warning: Signatures should start with '-- \\n' not with '--\\n'.\n" msgstr "" "\n" "警告：签名应该以‘-- \\n’起始而非以‘--\\n’。\n" #: src/lang.c:1341 msgid "Writing attributes file..." msgstr "写入属性文件…" #: src/lang.c:1342 #, fuzzy, c-format #| msgid "Trying %s" msgid "Writing %s\n" msgstr "尝试 %s" #: src/lang.c:1343 #, fuzzy #| msgid "Writing attributes file..." msgid "Writing overview cache..." msgstr "写入属性文件…" #: src/lang.c:1345 #, fuzzy, c-format #| msgid "%d Responses" msgid "%4d Responses" msgstr "%d 篇回应" #: src/lang.c:1347 msgid "Can't run slrnface: couldn't construct fifo name." msgstr "无法运行 slrnface：无法建构 fifo 名称。" #: src/lang.c:1348 #, c-format msgid "Can't run slrnface: failed to create %s" msgstr "无法运行 slrnface：无法创建 %s" #: src/lang.c:1349 #, c-format msgid "Slrnface abnormally exited, code %d." msgstr "Slrnface 不正常退出，代码 %d。" #: src/lang.c:1350 #, c-format msgid "Slrnface failed: %s." msgstr "Slrnface 失败：%s。" #: src/lang.c:1352 #, c-format msgid "Can't run slrnface: Environment variable %s not found." msgstr "无法运行 slrnface：找不到环境变量 %s。" #: src/lang.c:1354 #, fuzzy #| msgid "Can't run slrnface: Not running in a xterm." msgid "Can't run slrnface: Not running in an xterm." msgstr "无法运行 slrnface：未在 xterm 中运行。" #: src/lang.c:1357 msgid "couldn't connect to display" msgstr "" #: src/lang.c:1358 #, fuzzy #| msgid "Can't open %s" msgid "can't open FIFO" msgstr "无法打开 %s" #: src/lang.c:1359 msgid "executable not found" msgstr "" #: src/lang.c:1360 msgid "fork() failed" msgstr "" #: src/lang.c:1361 msgid "couldn't find controlling terminal" msgstr "" #: src/lang.c:1362 msgid "terminal doesn't export width and height" msgstr "" #: src/lang.c:1363 msgid "WINDOWID not found in environment" msgstr "" #: src/lang.c:1364 msgid "" "This directory is used to create named pipes for communication between\n" "slrnface and its parent process. It should normally be empty because\n" "the pipe is deleted right after it has been opened by both processes.\n" "\n" "File names generated by slrnface have the form \"hostname.pid\". It is\n" "probably an error if they linger here longer than a fraction of a second.\n" "\n" "However, if the directory is mounted from an NFS server, you might see\n" "special files created by your NFS server while slrnface is running.\n" "Do not try to remove them.\n" msgstr "" "这个目录被用来创建具名管道作为 slrnface\n" "与其上层进程之间的通信。它通常应该是空的，因为\n" "当管道同时由两个进程打开之后，它会立即被删除。\n" "\n" "由 slrnface 产生的文件名称具有“主机名称.pid”的形式。\n" "如果它们逗留在此的时间超过了几分之一秒，也许就是个错误。\n" "\n" "然而，如果目录是挂载自 NFS 服务器，当 slrnface 运行时，\n" "您也许会看到由您的 NFS 服务器所创建的特殊文件。\n" "请不要尝试去移除它们。\n" #: src/lang.c:1377 #, c-format msgid "Added %d %s" msgstr "已加入 %d %s" #: src/lang.c:1378 msgid "No unsubscribed groups to show" msgstr "没有已取消订阅的群组可显示" #: src/lang.c:1379 msgid "Showing subscribed to groups only" msgstr "只显示已订阅群组" #: src/lang.c:1380 msgid "Yes " msgstr "是 " #: src/lang.c:1381 #, fuzzy #| msgid " You have mail" msgid "You have mail" msgstr " 您有邮件" #: src/lang.c:1386 #, c-format msgid "" "\n" "Warning: Posting is in %s and contains characters which are not\n" " in your selected MM_NETWORK_CHARSET: %s.\n" " These characters will be replaced by '?' if you post this\n" " article unchanged. To avoid garbling your article please either\n" " edit it and remove those characters or change the setting of\n" " MM_NETWORK_CHARSET to a suitable value for your posting via the\n" " M)enu option.\n" msgstr "" "\n" "警告：张贴是以 %s 语言并含有一些字符是不属于\n" " 您所选 MM_NETWORK_CHARSET：%s。\n" " 如果您仍然不变更而张贴这篇文章，这些字符将被\n" " ‘？’所置换。要避免弄坏您的文章，您必须\n" " 编辑它并移除那些字符，或是透过 M)菜单 选项去\n" " 变更 MM_NETWORK_CHARSET 的设置为适当的值，\n" " 以用于您的张贴。\n" #: src/lang.c:1397 msgid " -D mode debug mode" msgstr " -D 模式 除错模式" #: src/lang.c:1401 msgid "" "Read carefully!\n" "\n" " You are about to cancel an article seemingly not written by you. This will\n" " wipe the article from lots of news servers throughout the world;\n" " Usenet's majority considers this rather inappropriate, to say the least.\n" " Only press 'd' if you are absolutely positive that you are ready to take\n" " the rap.\n" "\n" "This is the article you are about to cancel:\n" "\n" msgstr "" "请仔细阅读！\n" "\n" " 您即将取消一篇似乎不是由您所写的文章。 这将使\n" " 文章从全世界大部分的新闻服务器中抹除；\n" " 多数的 Usenet 用户认为这是相当不合宜的。\n" " 只有当您会绝对正面看待将要面对的饶舌时，\n" " 才去按下‘ｄ’。\n" "\n" "这是您即将要取消的文章：\n" "\n" #: src/lang.c:1410 msgid "toggle color" msgstr "切换颜色" #: src/lang.c:1411 msgid "" "# Changing colors of several screen parts\n" "# Possible values are:\n" "# -1 = default (white for foreground and black for background)\n" "# 0 = black\n" "# 1 = red\n" "# 2 = green\n" "# 3 = brown\n" "# 4 = blue\n" "# 5 = pink\n" "# 6 = cyan\n" "# 7 = white\n" "# These are *only* for foreground:\n" "# 8 = gray\n" "# 9 = light red\n" "# 10 = light green\n" "# 11 = yellow\n" "# 12 = light blue\n" "# 13 = light pink\n" "# 14 = light cyan\n" "# 15 = light white\n" "\n" msgstr "" "# 变更多个屏幕部分的颜色\n" "# 可能的值包括：\n" "# -1 = 缺省 (白色用于前景而黑色用于背景)\n" "# 0 = 黑色\n" "# 1 = 红色\n" "# 2 = 绿色\n" "# 3 = 棕色\n" "# 4 = 蓝色\n" "# 5 = 粉红\n" "# 6 = 青色\n" "# 7 = 白色\n" "# 这些 *只* 用于前景：\n" "# 8 = 灰色\n" "# 9 = 浅红色\n" "# 10 = 浅绿色\n" "# 11 = 黄色\n" "# 12 = 浅蓝色\n" "# 13 = 浅粉红\n" "# 14 = 浅青色\n" "# 15 = 亮白色\n" "\n" #: src/lang.c:1431 msgid " -a toggle color flag" msgstr " -a 切换颜色旗标" #: src/lang.c:1435 msgid "" "\n" "Error: Followup-To set to more than one newsgroup!\n" msgstr "" "\n" "错误：跟贴被设置超过一个新闻群组！\n" #: src/lang.c:1436 #, c-format msgid "" "\n" "Error: \"%s\" is renamed, use \"%s\" instead!\n" msgstr "" "\n" "错误：“%s”被重命名，使用“%s”作为替代！\n" #: src/lang.c:1437 #, c-format msgid "" "\n" "Error: cross-posting to %d newsgroups and no Followup-To line!\n" msgstr "" "\n" "错误：跨板张贴到 %d 新闻群组而没有跟贴行！\n" #: src/lang.c:1438 #, c-format msgid "" "\n" "Error: \"%s\" is not a valid newsgroup!\n" msgstr "" "\n" "错误：“%s”并非有效新闻群组！\n" #: src/lang.c:1440 msgid "" "\n" "Warning: Followup-To set to more than one newsgroup!\n" msgstr "" "\n" "警告：跟贴被设置超过一个新闻群组！\n" #: src/lang.c:1441 #, c-format msgid "" "\n" "Warning: \"%s\" is renamed, you should use \"%s\" instead!\n" msgstr "" "\n" "警告：“%s”被重命名，您应该使用“%s”作为替代！\n" #: src/lang.c:1442 #, c-format msgid "" "\n" "Warning: cross-posting to %d newsgroups and no Followup-To line!\n" msgstr "" "\n" "警告：跨板张贴到 %d 新闻群组而没有跟贴行！\n" #: src/lang.c:1443 #, c-format msgid "" "\n" "Warning: \"%s\" is not in your newsrc, it may be invalid at this site!\n" msgstr "" "\n" "警告：“%s”不在您的 newsrc 之中，在这个站台它也许会无效！\n" #: src/lang.c:1444 #, c-format msgid "" "\n" "Warning: \"%s\" is not a valid newsgroup at this site!\n" msgstr "" "\n" "警告：“%s”并非这个站台上的有效新闻群组！\n" #: src/lang.c:1448 #, c-format msgid "%d files successfully written from %d articles. %d %s occurred." msgstr "%d 个文件成功地从 %d 篇文章写入。%d %s 已发生。" #: src/lang.c:1449 msgid "Missing parts." msgstr "缺少部分。" #: src/lang.c:1450 msgid "No beginning." msgstr "没有起始部分。" #: src/lang.c:1451 msgid "No data." msgstr "没有数据。" #: src/lang.c:1452 msgid "Unknown error." msgstr "不明错误。" #: src/lang.c:1456 #, fuzzy, c-format #| msgid "Reading mail active file... " msgid "Reading mail active file: %s" msgstr "读取邮件现用文件…" #: src/lang.c:1457 #, fuzzy, c-format #| msgid "Reading mailgroups file... " msgid "Reading mailgroups file: %s" msgstr "读取邮件群组文件…" #: src/lang.c:1461 msgid "perform PGP operations on article" msgstr "对于文章施行 PGP 操作" #: src/lang.c:1462 msgid "Add key(s) to public keyring?" msgstr "将密钥加入公用钥匙圈？" #: src/lang.c:1463 #, c-format msgid "%s=encrypt, %s=sign, %s=both, %s=quit: " msgstr "%s=加密，%s=签名，%s=两者，%s=离开：" #: src/lang.c:1464 #, c-format msgid "%s=sign, %s=sign & include public key, %s=quit: " msgstr "%s=签名，%s=签名 & 包含公开密钥，%s=离开：" #: src/lang.c:1465 #, c-format msgid "PGP has not been set up (can't open %s)" msgstr "PGP 尚未设置 (无法打开 %s)" #: src/lang.c:1466 msgid "Article not signed and no public keys found" msgstr "文章未被签名且找不到任何公开密钥" #: src/lang.c:1468 #, c-format msgid "%s=quit, %s=edit, %s=ispell, %s=pgp, %s=menu, %s=post, %s=postpone: " msgstr "%s=离开，%s=编辑，%s=拼写检查，%s=pgp，%s=菜单，%s=张贴，%s=搁置：" #: src/lang.c:1469 #, c-format msgid "%s=quit, %s=edit, %s=ispell, %s=pgp, %s=send [%%s]: " msgstr "%s=离开，%s=编辑，%s=拼写检查，%s=pgp，%s=发送 [%%s]：" #: src/lang.c:1470 #, c-format msgid "%s=quit, %s=edit, %s=ispell, %s=pgp, %s=menu, %s=post, %s=postpone [%%s]: " msgstr "%s=离开，%s=编辑，%s=拼写检查，%s=pgp，%s=菜单，%s=张贴，%s=搁置 [%%s]：" #: src/lang.c:1472 #, c-format msgid "%s=quit, %s=edit, %s=pgp, %s=menu, %s=post, %s=postpone: " msgstr "%s=离开，%s=编辑，%s=pgp，%s=菜单，%s=张贴，%s=搁置：" #: src/lang.c:1473 #, c-format msgid "%s=quit, %s=edit, %s=pgp, %s=send [%%s]: " msgstr "%s=离开，%s=编辑，%s=pgp，%s=发送 [%%s]：" #: src/lang.c:1474 #, c-format msgid "%s=quit, %s=edit, %s=pgp, %s=menu, %s=post, %s=postpone [%%s]: " msgstr "%s=离开，%s=编辑，%s=pgp，%s=菜单，%s=张贴，%s=搁置 [%%s]：" #: src/lang.c:1478 #, c-format msgid "%s=quit, %s=edit, %s=ispell, %s=menu, %s=post, %s=postpone: " msgstr "%s=离开，%s=编辑，%s=拼写检查，%s=菜单，%s=张贴，%s=搁置：" #: src/lang.c:1479 #, c-format msgid "%s=quit, %s=edit, %s=ispell, %s=send [%%s]: " msgstr "%s=离开，%s=编辑，%s=拼写检查，%s=发送 [%%s]：" #: src/lang.c:1480 #, c-format msgid "%s=quit, %s=edit, %s=ispell, %s=menu, %s=post, %s=postpone [%%s]: " msgstr "%s=离开，%s=编辑，%s=拼写检查，%s=菜单，%s=张贴，%s=搁置 [%%s]：" #: src/lang.c:1482 #, c-format msgid "%s=quit, %s=edit, %s=menu, %s=post, %s=postpone: " msgstr "%s=离开，%s=编辑，%s=菜单，%s=张贴，%s=搁置：" #: src/lang.c:1483 #, c-format msgid "%s=quit, %s=edit, %s=send [%%s]: " msgstr "%s=离开，%s=编辑，%s=发送 [%%s]：" #: src/lang.c:1484 #, c-format msgid "%s=quit, %s=edit, %s=menu, %s=post, %s=postpone [%%s]: " msgstr "%s=离开，%s=编辑，%s=菜单，%s=张贴，%s=搁置 [%%s]：" #: src/lang.c:1489 msgid "Try cache_overview_files to speed up things.\n" msgstr "尝试 cache_overview_files 以加速。\n" #: src/lang.c:1490 msgid "Tin will use local index files instead.\n" msgstr "Tin 将使用本地索引文件作为替代。\n" #: src/lang.c:1491 msgid "Cannot find NNTP server name" msgstr "找不到 NNTP 服务器名称" #: src/lang.c:1492 msgid "CAPABILITIES did not announce READER" msgstr "能力中并未宣告包含阅读器" #: src/lang.c:1493 #, c-format msgid "Connecting to %s:%u..." msgstr "连接到 %s:%u…" #: src/lang.c:1494 #, fuzzy #| msgid "Failed to connect to NNTP server %s. Exiting..." msgid "NNTP connection error. Exiting..." msgstr "连接到 NNTP 服务器 %s 时失败。离开…" #: src/lang.c:1495 #, fuzzy #| msgid "Disconnecting from server...\n" msgid "Disconnecting from server..." msgstr "从服务器中断连接…\n" #: src/lang.c:1496 #, c-format msgid "Failed to connect to NNTP server %s. Exiting..." msgstr "连接到 NNTP 服务器 %s 时失败。离开…" #: src/lang.c:1497 msgid "205 Closing connection" msgstr "205 关闭连接" #: src/lang.c:1498 msgid "Your server does not support the NNTP XOVER or OVER command.\n" msgstr "您的服务器不支持 NNTP XOVER 或 OVER 命令。\n" #: src/lang.c:1499 #, c-format msgid "Port isn't numeric: %s:%s\n" msgstr "" #: src/lang.c:1500 #, c-format msgid "%s argument is not numeric: %s\n" msgstr "" #: src/lang.c:1502 #, c-format msgid "Port in %s isn't numeric: %s:%s\n" msgstr "" #: src/lang.c:1503 #, c-format msgid "reconnect (%d) limit %d reached, giving up." msgstr "" #: src/lang.c:1505 msgid "Connection to news server has timed out. Reconnect?" msgstr "连接到新闻服务器已超时。重新连接？" #: src/lang.c:1506 #, c-format msgid "" "Put the server name in the file %s,\n" "or set the environment variable NNTPSERVER" msgstr "" "在文件 %s 中放入服务器名称，\n" "或设置环境变量 NNTPSERVER" #: src/lang.c:1508 #, fuzzy #| msgid "Printing..." msgid "Continuing..." msgstr "打印中…" #: src/lang.c:1509 msgid "Read timeout from server - quit tin?" msgstr "" #: src/lang.c:1510 msgid " -C try COMPRESS NNTP extension" msgstr "" #: src/lang.c:1512 msgid " -A force authentication on connect" msgstr " -A 连接时强制认证" #: src/lang.c:1513 #, c-format msgid " -g serv read news from NNTP server serv [default=%s]" msgstr " -g serv 从 NNTP 服务器 serv [缺省=%s] 读取新闻" #: src/lang.c:1514 #, c-format msgid " -p port use port as NNTP port [default=%d]" msgstr " -p port 使用 port 作为 NNTP 通信端口 [缺省=%d]" #: src/lang.c:1516 msgid " -k skip verification for NNTPS" msgstr "" #: src/lang.c:1517 msgid " -T enable NNTPS" msgstr "" #: src/lang.c:1519 #, fuzzy #| msgid " -Q quick start. Same as -nqd" msgid " -Q quick start. Same as -dnq" msgstr " -Q 快速开始。如同 -nqd" #: src/lang.c:1520 msgid " -r read news remotely from default NNTP server" msgstr " -r 从缺省 NNTP 服务器远程读取新闻" #: src/lang.c:1521 msgid " -l use only LIST instead of GROUP (-n) command" msgstr " -l 只使用 LIST 以代替 GROUP (-n) 命令" #: src/lang.c:1522 msgid " -n only read subscribed .newsrc groups from NNTP server" msgstr " -n 从 NNTP 服务器只读取已订阅的 .newsrc 群组" #: src/lang.c:1524 msgid " -4 force connecting via IPv4" msgstr " -4 强制透过 IPv4 连接" #: src/lang.c:1525 msgid " -6 force connecting via IPv6" msgstr " -6 强制透过 IPv6 连接" #: src/lang.c:1526 msgid "" "\n" "socket or connect problem\n" msgstr "" "\n" "通信端或连接问题\n" #: src/lang.c:1528 #, c-format msgid "" "\n" "Connection to %s: " msgstr "" "\n" "连接到 %s：" #: src/lang.c:1529 msgid "Giving up...\n" msgstr "放弃…\n" #: src/lang.c:1531 #, c-format msgid "%s/tcp: Unknown service.\n" msgstr "%s/tcp：不明服务。\n" #: src/lang.c:1535 msgid "" "Your server does not have Xref: in its XOVER information.\n" "Tin will try to use XHDR XREF instead (slows down things a bit).\n" msgstr "" "您的服务器没有 Xref: 于它的 XOVER 信息之中。\n" "Tin 将尝试使用 XHDR XREF 作为替代 (会慢一点)。\n" #: src/lang.c:1538 msgid "Your server does not have Xref: in its XOVER information.\n" msgstr "您的服务器没有 Xref: 于它的 XOVER 信息之中。\n" #: src/lang.c:1541 #, fuzzy, c-format #| msgid "Can't open %s. Try %s -r to read news via NNTP.\n" msgid "Can't open %s. Try %s -r to read news via NNTP." msgstr "无法打开 %s。尝试 %s -r 以透过 NNTP 读取新闻。\n" #: src/lang.c:1544 #, fuzzy #| msgid " -Q quick start. Same as -qd" msgid " -Q quick start. Same as -dq" msgstr " -Q 快速开始。如同 -qd" #: src/lang.c:1545 msgid " -l read only active file instead of scanning spool (-n) command" msgstr " -l 现用文件只读以代替扫描暂存 (-n) 命令" #: src/lang.c:1546 msgid " -n only read subscribed .newsrc groups from spool" msgstr " -n 只从暂存读取已订阅的 .newsrc 群组" #: src/lang.c:1547 msgid "Your server does not have Xref: in its NOV-files.\n" msgstr "您的服务器没有 Xref: 于它的 NOV 文件之中。\n" #: src/lang.c:1551 msgid "Posting using external inews failed. Use built in inews instead?" msgstr "使用外部 inews 张贴失败。使用内置 inews 作为替代？" #: src/lang.c:1552 msgid "It worked! Should I always use my built in inews from now on?" msgstr "它做到了！从现在起，我应该一律使用内置的 inews？" #: src/lang.c:1556 #, c-format msgid "%d %s printed" msgstr "%d %s 已打印" #: src/lang.c:1557 msgid "output article/thread/hot/pattern/tagged articles to printer" msgstr "输出 文章/讨论串/热门/模式/已标记文章 到打印机" #: src/lang.c:1558 msgid "Print" msgstr "打印" #: src/lang.c:1559 msgid "Printing..." msgstr "打印中…" #: src/lang.c:1563 #, fuzzy, c-format #| msgid "%d %s printed" msgid "%d %s piped to \"%s\"" msgstr "%d %s 已打印" #: src/lang.c:1564 msgid "pipe article/thread/hot/pattern/tagged articles into command" msgstr "管道 文章/讨论串/热门/模式/已标记文章 进入命令" #: src/lang.c:1565 msgid "No command" msgstr "没有命令" #: src/lang.c:1566 msgid "Pipe" msgstr "管道" #: src/lang.c:1567 #, c-format msgid "Pipe to command [%.*s]> " msgstr "管道到命令 [%.*s]>" #: src/lang.c:1568 msgid "Piping..." msgstr "管道中…" #: src/lang.c:1570 msgid "Piping not enabled." msgstr "管道未启用。" #: src/lang.c:1574 #, c-format msgid "" "\n" "Error: The \"%s:\" line has spaces in it that MUST be removed.\n" " The only allowable space is the one separating the colon (:)\n" " from the contents. Use a comma (,) to separate multiple\n" " newsgroup names.\n" msgstr "" "\n" "错误：“%s:”行中含有必须被移除的空格。\n" " 只有用来分隔冒号(:)与内容的空格\n" " 才允许。使用逗号(,)来分隔多重的\n" " 新闻群组名称。\n" #: src/lang.c:1579 #, c-format msgid "" "\n" "Error: The \"%s:\" line is continued in the next line. Since\n" " the line may not contain whitespace, this is not allowed.\n" " Please write all newsgroups into a single line.\n" msgstr "" "\n" "错误：“%s:”行会延续至下一行。 由于\n" " 在行中不可以包含空白， 因此这是不允许的。\n" " 请将所有新闻群组写入单一行中。\n" #: src/lang.c:1584 #, c-format msgid "" "\n" "Warning: The \"%s:\" line is continued in the next line.\n" " This is a very new feature and may not be accepted by all servers.\n" " To avoid trouble please write all newsgroups into a single line.\n" msgstr "" "\n" "警告：“%s:”行会延续至下一行。\n" " 这是非常新的功能，可能无法被所有的服务器接收。\n" " 为避免麻烦，请将所有新闻群组写入单一行中。\n" #: src/lang.c:1588 #, c-format msgid "" "\n" "Warning: The \"%s:\" line has spaces in it that SHOULD be removed.\n" msgstr "" "\n" "警告：“%s:”行中含有应该被移除的空格。\n" #: src/lang.c:1593 msgid "" "\n" " If your article contains quoted text please take some time to pare it down\n" " to just the key points to which you are responding, or people will think\n" " you are a dweeb! Many people have the habit of skipping any article whose\n" " first page is largely quoted material. Format your article to fit in less\n" " then 80 chars, since that's the conventional size (72 is a good choice as\n" " it allows quoting without exceeding the limit). If your lines are too long\n" " they'll wrap around ugly and people won't read what you write. If you\n" " aren't careful and considerate in formatting your posting, people are\n" " likely to ignore it completely. It's a crowded net out there.\n" msgstr "" "\n" " 如果您的文章含有引言文本，请花一点时间将它精简\n" " 到仅剩您所要回应的关键点，否则别人将会觉得\n" " 您是个 dweeb！ 许多人习惯会跳过任何第一页是大量\n" " 引言材料的文章。 让您的文章宽度格式符合小于\n" " 80 字符，由于那是一个传统的大小 (72 是个不错的选择，\n" " 因为它允许引言而无需超出限制)。 如果您的文本行太长\n" " 它们会产生难看的换行，而别人将无法读取您所写的东西。 如果您\n" " 不在乎并注意您张贴所用的格式，别人将很可能\n" " 会完全忽略它，尤其是在这个拥挤的网络中。\n" #: src/lang.c:1606 msgid "shell escape" msgstr "命令壳跳脱" #: src/lang.c:1607 #, c-format msgid "Shell Command (%s)" msgstr "命令壳命令 (%s)" #: src/lang.c:1608 #, c-format msgid "Enter shell command [%s]> " msgstr "输入命令壳命令 [%s]>" #: src/lang.c:1612 #, c-format msgid "%s: Can't get entry for TERM\n" msgstr "%s：无法提取 TERM 条目\n" #: src/lang.c:1616 #, c-format msgid "Group %.*s ('q' to quit)..." msgstr "群组 %.*s (‘q’以离开)…" #: src/lang.c:1618 #, c-format msgid "Group %.*s..." msgstr "群组 %.*s…" #: src/lang.c:1622 msgid "Server unavailable\n" msgstr "服务器无法使用\n" #: src/lang.c:1628 #, c-format msgid "%s=pipe; %s=mail; %s=print; %s=quit; %s=toggle all/unread; %s=save; %s=tag; %s=post" msgstr "%s=管道；%s=邮寄；%s=打印；%s=离开；%s=切换所有/未读；%s=保存；%s=标记；%s=张贴" #: src/lang.c:1629 #, c-format msgid "%s=pipe; %s=mail; %s=print; %s=quit; %s=reply mail; %s=save; %s=tag; %s=post" msgstr "%s=管道；%s=邮寄；%s=打印；%s=离开；%s=回复邮件；%s=保存；%s=标记；%s=张贴" #: src/lang.c:1631 #, c-format msgid "%s=mail; %s=print; %s=quit; %s=toggle all/unread; %s=save; %s=tag; %s=post" msgstr "%s=邮寄；%s=打印；%s=离开；%s=切换所有/未读；%s=保存；%s=标记；%s=张贴" #: src/lang.c:1632 #, c-format msgid "%s=mail; %s=print; %s=quit; %s=reply mail; %s=save; %s=tag; %s=post" msgstr "%s=邮寄；%s=打印；%s=离开；%s=回复邮件；%s=保存；%s=标记；%s=张贴" #: src/lang.c:1636 #, c-format msgid "%s=pipe; %s=mail; %s=quit; %s=toggle all/unread; %s=save; %s=tag; %s=post" msgstr "%s=管道；%s=邮寄；%s=离开；%s=切换所有/未读；%s=保存；%s=标记；%s=张贴" #: src/lang.c:1637 #, c-format msgid "%s=pipe; %s=mail; %s=quit; %s=reply mail; %s=save; %s=tag; %s=post" msgstr "%s=管道；%s=邮寄；%s=离开；%s=回复邮件；%s=保存；%s=标记；%s=张贴" #: src/lang.c:1639 #, c-format msgid "%s=mail; %s=quit; %s=toggle all/unread; %s=save; %s=tag; %s=post" msgstr "%s=邮寄；%s=离开；%s=切换所有/未读；%s=保存；%s=标记；%s=张贴" #: src/lang.c:1640 #, c-format msgid "%s=mail; %s=quit; %s=reply mail; %s=save; %s=tag; %s=post" msgstr "%s=邮寄；%s=离开；%s=回复邮件；%s=保存；%s=标记；%s=张贴" #: src/lang.c:1646 msgid "Terminal does not support color" msgstr "终端机不支持颜色" #: src/lang.c:1651 #, c-format msgid "Trying %s" msgstr "尝试 %s" #: src/lang.c:1666 msgid "Subject" msgstr "主旨" #: src/lang.c:1667 msgid "References" msgstr "参考" #: src/lang.c:1668 msgid "Both Subject and References" msgstr "主旨和参考两者" #: src/lang.c:1669 msgid "Multipart Subject" msgstr "多部件主旨" #: src/lang.c:1670 msgid "Percentage Match" msgstr "百分比匹配" #: src/lang.c:1683 src/lang.c:1774 src/lang.c:1880 src/lang.c:1983 msgid "No" msgstr "否" #: src/lang.c:1684 src/lang.c:1882 msgid "Yes" msgstr "是" #: src/lang.c:1685 #, fuzzy #| msgid "Hide All" msgid "Hide all" msgstr "隐藏所有" #: src/lang.c:1694 msgid "Address" msgstr "地址" #: src/lang.c:1695 msgid "Full Name" msgstr "全名" #: src/lang.c:1696 msgid "Address and Name" msgstr "地址和名称" #: src/lang.c:1704 msgid "Max" msgstr "最大" #: src/lang.c:1705 msgid "Sum" msgstr "总和" #: src/lang.c:1706 msgid "Average" msgstr "平均" #: src/lang.c:1716 src/lang.c:1736 msgid "Black" msgstr "黑色" #: src/lang.c:1717 src/lang.c:1737 msgid "Red" msgstr "红色" #: src/lang.c:1718 src/lang.c:1738 msgid "Green" msgstr "绿色" #: src/lang.c:1719 src/lang.c:1739 msgid "Brown" msgstr "棕色" #: src/lang.c:1720 src/lang.c:1740 msgid "Blue" msgstr "蓝色" #: src/lang.c:1721 src/lang.c:1741 msgid "Pink" msgstr "粉红" #: src/lang.c:1722 src/lang.c:1742 msgid "Cyan" msgstr "青色" #: src/lang.c:1723 src/lang.c:1743 msgid "White" msgstr "白色" #: src/lang.c:1724 msgid "Gray" msgstr "灰色" #: src/lang.c:1725 msgid "Light Red" msgstr "浅红色" #: src/lang.c:1726 msgid "Light Green" msgstr "浅绿色" #: src/lang.c:1727 msgid "Yellow" msgstr "黄色" #: src/lang.c:1728 msgid "Light Blue" msgstr "浅蓝色" #: src/lang.c:1729 msgid "Light Pink" msgstr "浅粉红" #: src/lang.c:1730 msgid "Light Cyan" msgstr "浅青色" #: src/lang.c:1731 msgid "Light White" msgstr "亮白色" #: src/lang.c:1752 src/lang.c:1887 src/lang.c:1902 msgid "Nothing" msgstr "没有任何东西" #: src/lang.c:1754 msgid "Space" msgstr "空格" #: src/lang.c:1762 msgid "Normal" msgstr "一般" #: src/lang.c:1763 msgid "Best highlighting" msgstr "最佳高亮度显示" #: src/lang.c:1764 msgid "Underline" msgstr "底线" #: src/lang.c:1765 msgid "Reverse video" msgstr "反白显示" #: src/lang.c:1766 msgid "Blinking" msgstr "闪动" #: src/lang.c:1767 msgid "Half bright" msgstr "半明亮" #: src/lang.c:1768 msgid "Bold" msgstr "粗体" #: src/lang.c:1775 msgid "Cc" msgstr "副本" #: src/lang.c:1776 msgid "Bcc" msgstr "密件副本" #: src/lang.c:1777 msgid "Cc and Bcc" msgstr "副本和密件副本" #: src/lang.c:1794 src/lang.c:1807 msgid "none" msgstr "无" #: src/lang.c:1795 msgid "commands" msgstr "命令" #: src/lang.c:1796 msgid "select" msgstr "选取" #: src/lang.c:1798 msgid "commands & quit" msgstr "命令 & 离开" #: src/lang.c:1799 msgid "commands & select" msgstr "命令 & 选取" #: src/lang.c:1800 msgid "quit & select" msgstr "离开 & 选取" #: src/lang.c:1801 msgid "commands & quit & select" msgstr "命令 & 离开 & 选取" #: src/lang.c:1808 msgid "PageDown" msgstr "下一页" #: src/lang.c:1809 msgid "PageNextUnread" msgstr "下一未读页" #: src/lang.c:1810 msgid "PageDown or PageNextUnread" msgstr "下一页或一未读页" #: src/lang.c:1816 msgid "Subject: (case sensitive)" msgstr "Subject: (大小写相符)" #: src/lang.c:1817 msgid "Subject: (ignore case)" msgstr "Subject: (忽略大小写)" #: src/lang.c:1818 msgid "From: (case sensitive)" msgstr "From: (大小写相符)" #: src/lang.c:1819 msgid "From: (ignore case)" msgstr "From: (忽略大小写)" #: src/lang.c:1820 msgid "Msg-ID: & full References: line" msgstr "Message-ID: & 全部 References: 行" #: src/lang.c:1821 msgid "Msg-ID: & last References: only" msgstr "Message-ID: & 最后一笔 References: 只有" #: src/lang.c:1822 msgid "Message-ID: entry only" msgstr "只有 Message-ID: 条目" #: src/lang.c:1823 msgid "Lines:" msgstr "Lines:" #: src/lang.c:1829 msgid "Don't trim article body" msgstr "不修剪文章内文" #: src/lang.c:1830 msgid "Skip leading blank lines" msgstr "跳过前导空行" #: src/lang.c:1831 msgid "Skip trailing blank lines" msgstr "跳过尾随空行" #: src/lang.c:1832 msgid "Skip leading and trailing blank l." msgstr "跳过前导和尾随空行。" #: src/lang.c:1833 msgid "Compact multiple between text" msgstr "压缩文本间多重空行" #: src/lang.c:1834 msgid "Compact multiple and skip leading" msgstr "压缩多重空行和跳过前导空行" #: src/lang.c:1835 msgid "Compact multiple and skip trailing" msgstr "压缩多重空行和跳过尾随空行" #: src/lang.c:1836 msgid "Compact mltpl., skip lead. & trai." msgstr "压缩多重空行，跳过前导 & 尾随空行。" #: src/lang.c:1842 #, fuzzy #| msgid "Color of help/mail sign" msgid "Don't show help or mail sign" msgstr "说明/邮件签名的颜色" #: src/lang.c:1843 #, fuzzy #| msgid "Color of help/mail sign" msgid "Show only help sign" msgstr "说明/邮件签名的颜色" #: src/lang.c:1844 msgid "Show only mail sign if new mail" msgstr "" #: src/lang.c:1845 msgid "Show mail if new mail else help s." msgstr "" #: src/lang.c:1881 msgid "Shell archive" msgstr "命令壳存盘" #: src/lang.c:1888 msgid "Subject: (descending)" msgstr "Subject: (递减)" #: src/lang.c:1889 msgid "Subject: (ascending)" msgstr "Subject: (递升)" #: src/lang.c:1890 msgid "From: (descending)" msgstr "From: (递减)" #: src/lang.c:1891 msgid "From: (ascending)" msgstr "From: (递升)" #: src/lang.c:1892 msgid "Date: (descending)" msgstr "Date: (递减)" #: src/lang.c:1893 msgid "Date: (ascending)" msgstr "Date: (递升)" #: src/lang.c:1894 src/lang.c:1903 msgid "Score (descending)" msgstr "分数 (递减)" #: src/lang.c:1895 src/lang.c:1904 msgid "Score (ascending)" msgstr "分数 (递升)" #: src/lang.c:1896 msgid "Lines: (descending)" msgstr "Lines: (递减)" #: src/lang.c:1897 msgid "Lines: (ascending)" msgstr "Lines: (递升)" #: src/lang.c:1905 msgid "Last posting date (descending)" msgstr "最近一次张贴日期 (递减)" #: src/lang.c:1906 msgid "Last posting date (ascending)" msgstr "最近一次张贴日期 (递升)" #: src/lang.c:1912 msgid "Quick-sort" msgstr "快速排序法" #: src/lang.c:1913 msgid "Heap-sort" msgstr "堆积排序法" #: src/lang.c:1920 msgid "Always Keep" msgstr "一律保留" #: src/lang.c:1921 msgid "Always Remove" msgstr "一律移除" #: src/lang.c:1922 msgid "Mark with D on selection screen" msgstr "于选择屏幕以 D 标记" #: src/lang.c:1928 msgid "Kill only unread arts" msgstr "只砍除未读文章" #: src/lang.c:1929 msgid "Kill all arts & show with K" msgstr "以 K 砍除所有文章 & 显示" #. TODO: s/K/art_marked_killed/ #: src/lang.c:1930 msgid "Kill all arts and never show" msgstr "砍除所有文章并永不显示" #: src/lang.c:1936 msgid "Nothing special" msgstr "没什么特别" #: src/lang.c:1937 msgid "Compress quotes" msgstr "压缩引言" #: src/lang.c:1938 msgid "Quote signatures" msgstr "引用签名" #: src/lang.c:1939 msgid "Compress quotes, quote sigs" msgstr "压缩引言，引用签名" #: src/lang.c:1940 msgid "Quote empty lines" msgstr "引言空行" #: src/lang.c:1941 msgid "Compress quotes, quote empty lines" msgstr "压缩引言，引言空行" #: src/lang.c:1942 msgid "Quote sigs & empty lines" msgstr "引用签名 & 空行" #: src/lang.c:1943 msgid "Comp. q., quote sigs & empty lines" msgstr "压缩引言，引用签名 & 空行" #: src/lang.c:1984 #, fuzzy #| msgid "with headers" msgid "With headers" msgstr "保留标头" #: src/lang.c:1985 #, fuzzy #| msgid "without headers" msgid "Without headers" msgstr "无需标头" #: src/lang.c:1992 msgid "NFKC" msgstr "NFKC" #: src/lang.c:1994 msgid "NFKD" msgstr "NFKD" #: src/lang.c:1995 msgid "NFC" msgstr "NFC" #: src/lang.c:1996 msgid "NFD" msgstr "NFD" #: src/lang.c:1998 msgid "NFKC case fold" msgstr "" #: src/lang.c:2007 msgid "Display Options" msgstr "显示选项" #: src/lang.c:2014 msgid "Color Options" msgstr "颜色选项" #: src/lang.c:2020 msgid "Highlight Options" msgstr "突显选项" #: src/lang.c:2027 msgid "Article-Limiting Options" msgstr "文章限制选项" #: src/lang.c:2033 msgid "Posting/Mailing Options" msgstr "张贴/邮寄选项" #: src/lang.c:2039 msgid "Saving/Printing Options" msgstr "保存/打印选项" #: src/lang.c:2045 msgid "Expert Options" msgstr "专家选项" #: src/lang.c:2051 msgid "Filtering Options" msgstr "筛选选项" #: src/lang.c:2056 src/lang.c:2087 src/lang.c:2093 src/lang.c:2120 #: src/lang.c:2172 src/lang.c:2178 src/lang.c:2188 src/lang.c:2199 #: src/lang.c:2217 src/lang.c:2228 src/lang.c:2297 src/lang.c:2512 #: src/lang.c:2518 src/lang.c:2524 src/lang.c:2539 src/lang.c:2551 #: src/lang.c:2558 src/lang.c:2612 src/lang.c:2621 src/lang.c:2627 #: src/lang.c:2634 src/lang.c:2641 src/lang.c:2648 src/lang.c:2655 #: src/lang.c:2662 src/lang.c:2669 src/lang.c:2676 src/lang.c:2683 #: src/lang.c:2690 src/lang.c:2697 src/lang.c:2704 src/lang.c:2711 #: src/lang.c:2718 src/lang.c:2725 src/lang.c:2732 src/lang.c:2739 #: src/lang.c:2746 src/lang.c:2753 src/lang.c:2760 src/lang.c:2767 #: src/lang.c:2774 src/lang.c:2781 src/lang.c:2788 src/lang.c:2795 #: src/lang.c:2802 src/lang.c:2809 src/lang.c:2817 src/lang.c:2833 #: src/lang.c:2840 src/lang.c:2847 src/lang.c:2854 src/lang.c:2860 #: src/lang.c:2866 src/lang.c:2889 src/lang.c:2901 src/lang.c:2936 #: src/lang.c:2989 src/lang.c:3003 src/lang.c:3009 src/lang.c:3034 #: src/lang.c:3052 src/lang.c:3069 src/lang.c:3081 src/lang.c:3114 #: src/lang.c:3143 src/lang.c:3163 src/lang.c:3190 src/lang.c:3200 #: src/lang.c:3207 src/lang.c:3233 src/lang.c:3257 src/lang.c:3412 #: src/lang.c:3427 src/lang.c:3435 src/lang.c:3449 src/lang.c:3455 #: src/lang.c:3493 msgid " toggles, sets, cancels." msgstr " 切换， 设置， 取消。" #: src/lang.c:2057 msgid "Show mini menu & posting etiquette" msgstr "显示迷你菜单 & 张贴礼仪" #: src/lang.c:2058 msgid "" "# If ON show a mini menu of useful commands at each level\n" "# and posting etiquette after composing an article\n" msgstr "" "# 如果打开就在每个层级中显示常用命令的迷你菜单\n" "# 并于撰写文章之后显示张贴礼仪\n" #: src/lang.c:2063 msgid "Show short description for each newsgroup. toggles & sets." msgstr "显示每个新闻群组的简短描述。 切换 & 设置。" #: src/lang.c:2064 msgid "Show description of each newsgroup" msgstr "显示每个新闻群组的描述" #: src/lang.c:2065 msgid "" "# If ON show group description text after newsgroup name at\n" "# group selection level\n" msgstr "" "# 如果打开就在群组选择层级中于新闻群组名称之后\n" "# 显示群组描述文本\n" #: src/lang.c:2070 #, fuzzy #| msgid "Show Subject & From (author) fields in group menu. toggles & sets." msgid "Show From (author) fields in group & thread level. toggles & sets." msgstr "在群组菜单中显示主旨 & 发信者 (作者) 字段。 切换 & 设置。" #: src/lang.c:2071 #, fuzzy #| msgid "In group menu, show author by" msgid "In group and thread level, show author by" msgstr "在群组菜单中，显示作者" #: src/lang.c:2072 #, fuzzy #| msgid "" #| "# Part of from field to display\n" #| "# Possible values are (the default is marked with *):\n" #| "# 0 = none\n" #| "# 1 = address\n" #| "# * 2 = full name\n" #| "# 3 = both\n" msgid "" "# Part of From field to display in group and thread level\n" "# Possible values are (the default is marked with *):\n" "# 0 = none\n" "# 1 = address\n" "# * 2 = full name\n" "# 3 = both\n" msgstr "" "# 要显示的发信者部分字段\n" "# 可能的值包括 (默认值以 * 标记)：\n" "# 0 = 无\n" "# 1 = 地址\n" "# * 2 = 全名\n" "# 3 = 两者\n" #: src/lang.c:2081 msgid "Draw -> or highlighted bar for selection. toggles & sets." msgstr "绘制 -> 或高亮度条用于选择。 切换 & 设置。" #: src/lang.c:2082 msgid "Draw -> instead of highlighted bar" msgstr "绘制 -> 以代替高亮度条" #: src/lang.c:2083 msgid "# If ON use -> otherwise highlighted bar for selection\n" msgstr "# 如果打开就使用 -> 否则高亮度条用于选择\n" #: src/lang.c:2088 msgid "Use inverse video for page headers" msgstr "使用反白显示用于页面标头" #: src/lang.c:2089 msgid "# If ON use inverse video for page headers at different levels\n" msgstr "# 如果打开就于不同的层级使用反白显示用于页面标头\n" #: src/lang.c:2094 msgid "Thread articles by" msgstr "讨论串文章依据" #: src/lang.c:2095 msgid "" "# Thread articles by ...\n" "# Possible values are (the default is marked with *):\n" "# 0 = nothing\n" "# 1 = Subject\n" "# 2 = References\n" "# * 3 = Both (Subject and References)\n" "# 4 = Multipart Subject\n" "# 5 = Percentage Match\n" msgstr "" "# 讨论串文章依…\n" "# 可能的值包括 (默认值以 * 标记)：\n" "# 0 = 没有任何东西\n" "# 1 = 主旨\n" "# 2 = 参考\n" "# * 3 = 两者 (主旨和参考)\n" "# 4 = 多部件主旨\n" "# 5 = 百分比匹配\n" #: src/lang.c:2106 msgid "Enter percentage match required to thread together. sets." msgstr "输入将讨论串起所必需的百分比匹配。 设置。" #: src/lang.c:2107 msgid "Thread percentage match" msgstr "讨论串百分比匹配" #: src/lang.c:2109 #, fuzzy, no-c-format #| msgid "" #| "# Thread percentage match...\n" #| "# the percentage of characters in the subject of an article that must match\n" #| "# a base article for both those articles to be considered to belong to the\n" #| "# same thread. This option is an integer percentage, eg. 80, no decimals may\n" #| "# follow. If 80 is used here, then 80% of the characters must match exactly,\n" #| "# no insertion of a character, for the two articles to be put in the same\n" #| "# thread. eg. 'happy' and 'harpy' would match, but 'harpie', 'happie' and\n" #| "# 'harppy' would be threaded separately from 'happy'\n" msgid "" "# Thread percentage match...\n" "# the percentage of characters in the subject of an article that must match\n" "# a base article for both those articles to be considered to belong to the\n" "# same thread. This option is an integer percentage, e.g. 80, no decimals may\n" "# follow. If 80 is used here, then 80% of the characters must match exactly,\n" "# no insertion of a character, for the two articles to be put in the same\n" "# thread. e.g. 'happy' and 'harpy' would match, but 'harpie', 'happie' and\n" "# 'harppy' would be threaded separately from 'happy'\n" msgstr "" "# 帖子百分比匹配…\n" "# 在文章的主题中，一定百分比的字符必须匹配某个用来同时匹配两篇文章的基础文章\n" "# 此选项应该是一个整数百分比，例如 80，并且不可跟随任何小数。\n" "# 如果 80 用在这里，两个将被置入同一个帖子中的文章标题中 80% 的字符必须能精确匹配，不含\n" "# 任何插入。例如 happy 将匹配 harpy，但 harpie, happie 和 harpy 会被分入另一篇帖子。\n" #: src/lang.c:2121 msgid "Score of a thread" msgstr "讨论串的分数" #: src/lang.c:2122 msgid "" "# Thread score\n" "# Possible values are (the default is marked with *):\n" "# * 0 = max\n" "# 1 = sum\n" "# 2 = average\n" msgstr "" "# 讨论串分数\n" "# 可能的值包括 (默认值以 * 标记)：\n" "# * 0 = 最大\n" "# 1 = 总和\n" "# 2 = 平均\n" #: src/lang.c:2130 msgid "Sort articles by Subject, From, Date or Score. toggles & sets." msgstr "排序文章依据主题、发信者、日期或分数。 切换 & 设置。" #: src/lang.c:2131 msgid "Sort articles by" msgstr "排序文章依据" #: src/lang.c:2132 msgid "" "# Sort articles by ...\n" "# Possible values are (the default is marked with *):\n" "# 0 = nothing\n" "# 1 = Subject descending\n" "# 2 = Subject ascending\n" "# 3 = From descending\n" "# 4 = From ascending\n" "# 5 = Date descending\n" "# * 6 = Date ascending\n" "# 7 = Score descending\n" "# 8 = Score ascending\n" "# 9 = Lines descending\n" "# 10 = Lines ascending\n" msgstr "" "# 排序文章依据…\n" "# 可能的值包括 (默认值以 * 标记)：\n" "# 0 = 没有任何东西\n" "# 1 = 主旨递减\n" "# 2 = 主旨递升\n" "# 3 = 发信者递减\n" "# 4 = 发信者递升\n" "# 5 = 日期递减\n" "# * 6 = 日期递升\n" "# 7 = 分数递减\n" "# 8 = 分数递升\n" "# 9 = 行数递减\n" "# 10 = 行数递升\n" #: src/lang.c:2148 msgid "Sort threads by Nothing or Score. toggles & sets." msgstr "排序讨论串不依据任何东西或依据分数。 切换 & 设置。" #: src/lang.c:2149 msgid "Sort threads by" msgstr "排序讨论串依据" #: src/lang.c:2150 msgid "" "# Sort thread by ...\n" "# Possible values are (the default is marked with *):\n" "# 0 = nothing\n" "# * 1 = Score descending\n" "# 2 = Score ascending\n" "# 3 = Last posting date descending\n" "# 4 = Last posting date ascending\n" msgstr "" "# 排序讨论串依据…\n" "# 可能的值包括 (默认值以 * 标记)：\n" "# 0 = 没有任何东西\n" "# * 1 = 分数递减\n" "# 2 = 分数递升\n" "# 3 = 最近一次张贴日期递减\n" "# 4 = 最近一次张贴日期递升\n" #: src/lang.c:2160 msgid "Put cursor at first/last unread art in groups. toggles & sets." msgstr "将光标放在群组中第一/最后一篇未读文章。 切换 & 设置。" #: src/lang.c:2161 msgid "Go to first unread article in group" msgstr "前往群组中第一篇未读的文章" #: src/lang.c:2162 msgid "# If ON put cursor at first unread art in group otherwise last art\n" msgstr "# 如果打开就将光标放在群组中第一篇未读文章，否则是最后一篇文章\n" #: src/lang.c:2166 msgid "Show all articles or only unread articles. toggles & sets." msgstr "显示所有文章或只有未读文章。 切换 & 设置。" #: src/lang.c:2167 msgid "Show only unread articles" msgstr "只显示未读文章" #: src/lang.c:2168 msgid "# If ON show only new/unread articles otherwise show all.\n" msgstr "# 如果打开就只显示新的/未读文章，否则全部显示。\n" #: src/lang.c:2173 msgid "Show only groups with unread arts" msgstr "只显示有未读文章的群组" #: src/lang.c:2174 msgid "# If ON show only subscribed to groups that contain unread articles.\n" msgstr "# 如果打开就只显示包含未读文章的订阅群组。\n" #: src/lang.c:2179 msgid "Filter which articles" msgstr "筛选哪些文章" #: src/lang.c:2180 msgid "" "# Filter which articles\n" "# Possible values are (the default is marked with *):\n" "# * 0 = only kill unread articles\n" "# 1 = kill all articles and show in threads marked with K\n" "# 2 = kill all articles and never show them\n" msgstr "" "# 筛选哪些文章\n" "# 可能的值包括 (默认值以 * 标记)：\n" "# * 0 = 只有砍除未读文章\n" "# 1 = 砍除所有文章并在讨论串中显示时以 K 标记\n" "# 2 = 砍除所有文章并永不显示它们\n" #: src/lang.c:2189 msgid "Go to the next unread article with" msgstr "前往下一篇未读文章借由" #: src/lang.c:2190 msgid "" "# Go to the unread article with following key(s)\n" "# Possible values are (the default is marked with *):\n" "# 0 = nothing\n" "# 1 = PAGE DOWN\n" "# * 2 = TAB\n" "# 3 = PAGE DOWN or TAB\n" msgstr "" "# 前往未读文章借由下列按键\n" "# 可能的值包括 (默认值以 * 标记)：\n" "# 0 = 没有任何东西\n" "# 1 = PAGE DOWN\n" "# * 2 = TAB\n" "# 3 = PAGE DOWN 或 TAB\n" #: src/lang.c:2200 msgid "How to treat blank lines" msgstr "如何对待空行" #: src/lang.c:2201 msgid "" "# Trim the article body, remove unnecessary blank lines.\n" "# Possible values are (the default is marked with *):\n" "# * 0 = Nothing special\n" "# 1 = Skip leading blank lines\n" "# 2 = Skip trailing blank lines\n" "# 3 = Skip leading and trailing blank lines\n" "# 4 = Compact multiple blank lines between text blocks\n" "# 5 = Compact multiple blank lines between text blocks and skip\n" "# leading blank lines\n" "# 6 = Compact multiple blank lines between text blocks and skip\n" "# trailing blank lines\n" "# 7 = Compact multiple blank lines between text blocks and skip\n" "# leading and trailing blank lines\n" msgstr "" "# 修剪文章内文，移除不必要的空行。\n" "# 可能的值包括 (默认值以 * 标记)：\n" "# * 0 = 没什么特别\n" "# 1 = 跳过前导空行\n" "# 2 = 跳过尾随空行\n" "# 3 = 跳过前导和尾随空行\n" "# 4 = 压缩文本区块间的多重空行\n" "# 5 = 压缩文本区块间的多重空行和跳过\n" "# 前导空行\n" "# 6 = 压缩文本区块间的多重空行和跳过\n" "# 尾随空行\n" "# 7 = 压缩文本区块间的多重空行和跳过\n" "# 前导和尾随空行\n" #: src/lang.c:2218 msgid "Show help/mail sign in level titles" msgstr "" #: src/lang.c:2219 msgid "" "# Show help sign, new mail sign, both or nothing in level titles.\n" "# Possible values are (the default is marked with *):\n" "# 0 = Don't show help or mail sign\n" "# 1 = Show only help sign\n" "# 2 = Show only mail sign if new mail have arrived\n" "# * 3 = Show mail sign if new mail has arrived else show help sign\n" msgstr "" #: src/lang.c:2229 msgid "List thread using right arrow key" msgstr "使用向右键列出讨论串" #: src/lang.c:2230 msgid "# If ON automatically list thread when entering it using right arrow key.\n" msgstr "# 如果打开当使用向右键输入它时就自动列出讨论串。\n" #: src/lang.c:2234 msgid "Enter character to indicate deleted articles. sets, cancels." msgstr "输入字符以指出已删除文章。 设置， 取消。" #: src/lang.c:2235 msgid "Character to show deleted articles" msgstr "用来显示已删除文章的字符" #: src/lang.c:2236 msgid "" "# Character used to show that an art was deleted (default 'D')\n" "# _ is turned into ' '\n" msgstr "" "# 用来显示文章被删除的字符 (缺省‘D’)\n" "# _ 被转换为‘ ’\n" #: src/lang.c:2241 msgid "Enter character to indicate articles in a range. sets, cancels." msgstr "输入字符以指出在范围中的文章。 设置， 取消。" #: src/lang.c:2242 msgid "Character to show inrange articles" msgstr "用来显示范围中文章的字符" #: src/lang.c:2243 msgid "" "# Character used to show that an art is in a range (default '#')\n" "# _ is turned into ' '\n" msgstr "" "# 用来显示文章在范围中的字符 (缺省‘#’)\n" "# _ 被转换为‘ ’\n" #: src/lang.c:2248 msgid "Enter character to indicate that article will return. sets, cancels." msgstr "输入字符以指出该文章将返回。 设置， 取消。" #: src/lang.c:2249 msgid "Character to show returning arts" msgstr "用来显示返回文章的字符" #: src/lang.c:2250 msgid "" "# Character used to show that an art will return (default '-')\n" "# _ is turned into ' '\n" msgstr "" "# 用来显示该文章将返回的字符 (缺省‘-’)\n" "# _ 被转换为‘ ’\n" #: src/lang.c:2255 msgid "Enter character to indicate selected articles. sets, cancels." msgstr "输入字符以指出已选文章。 设置， 取消。" #: src/lang.c:2256 msgid "Character to show selected articles" msgstr "用来显示已选文章的字符" #: src/lang.c:2257 msgid "" "# Character used to show that an art was auto-selected (default '*')\n" "# _ is turned into ' '\n" msgstr "" "# 用来显示该文章已被自动选取的字符 (缺省‘*’)\n" "# _ 被转换为‘ ’\n" #: src/lang.c:2262 msgid "Enter character to indicate recent articles. sets, cancels." msgstr "输入字符以指出最近文章。 设置， 取消。" #: src/lang.c:2263 msgid "Character to show recent articles" msgstr "用来显示最近文章的字符" #: src/lang.c:2264 msgid "" "# Character used to show that an art is recent (default 'o')\n" "# _ is turned into ' '\n" msgstr "" "# 用来显示是最近文章的字符 (缺省‘o’)\n" "# _ 被转换为‘ ’\n" #: src/lang.c:2269 msgid "Enter character to indicate unread articles. sets, cancels." msgstr "输入字符以指出未读文章。 设置， 取消。" #: src/lang.c:2270 msgid "Character to show unread articles" msgstr "用来显示未读文章的字符" #: src/lang.c:2271 msgid "" "# Character used to show that an art is unread (default '+')\n" "# _ is turned into ' '\n" msgstr "" "# 用来显示该文章未读的字符 (缺省‘+’)\n" "# _ 被转换为‘ ’\n" #: src/lang.c:2276 msgid "Enter character to indicate read articles. sets, cancels." msgstr "输入字符以指出已读文章。 设置， 取消。" #: src/lang.c:2277 msgid "Character to show read articles" msgstr "用来显示已读文章的字符" #: src/lang.c:2278 msgid "" "# Character used to show that an art was read (default ' ')\n" "# _ is turned into ' '\n" msgstr "" "# 用来显示该文章已读取字符 (缺省‘ ’)\n" "# _ 被转换为‘ ’\n" #: src/lang.c:2283 msgid "Enter character to indicate killed articles. sets, cancels." msgstr "输入字符以指出被砍除文章。 设置， 取消。" #: src/lang.c:2284 msgid "Character to show killed articles" msgstr "用来显示被砍除文章的字符" #: src/lang.c:2285 msgid "" "# Character used to show that an art was killed (default 'K')\n" "# kill_level must be set accordingly, _ is turned into ' '\n" msgstr "" "# 用来显示该文章被砍除的字符 (缺省‘K’)\n" "# kill_level 必须根据不同情况而设置，_ 被转换为‘ ’\n" #: src/lang.c:2290 msgid "Enter character to indicate read selected articles. sets, cancels." msgstr "输入字符以指出读取所选文章。 设置， 取消。" #: src/lang.c:2291 msgid "Character to show readselected arts" msgstr "用来显示读取所选文章的字符" #: src/lang.c:2292 msgid "" "# Character used to show that an art was selected before read (default ':')\n" "# kill_level must be set accordingly, _ is turned into ' '\n" msgstr "" "# 用来显示该文章读取之前已被选的字符 (缺省‘:’)\n" "# kill_level 必须根据不同情况而设置，_ 被转换为‘ ’\n" #: src/lang.c:2298 msgid "Abbreviate long newsgroup names" msgstr "将较长新闻群组名称缩写" #: src/lang.c:2299 msgid "" "# If ON abbreviate (if necessary) long newsgroup names at group selection\n" "# level and article level like this:\n" "# news.software.readers -> n.software.readers -> n.s.readers -> n.s.r.\n" msgstr "" "# 如果打开就将较长新闻群组名称缩写 (如果必要的话)，在群组选择\n" "# 层级和文章层级会如下所示：\n" "# news.software.readers -> n.software.readers -> n.s.readers -> n.s.r。\n" #: src/lang.c:2305 msgid "0 = full page scrolling, -1 = show previous last line as first on next page, -2 = half page" msgstr "0 = 整页卷动，-1 = 显示上页最后一行为下页第一行，-2 = 半页卷动" #: src/lang.c:2306 msgid "Number of lines to scroll in pager" msgstr "页面切换时卷动的行数" #: src/lang.c:2307 msgid "" "# Number of lines that cursor-up/down will scroll in article pager\n" "# Possible values are (the default is marked with *):\n" "# -2 = half-page scrolling\n" "# -1 = the top/bottom line is carried over onto the next page\n" "# 0 = page-by-page (traditional behavior)\n" "# * 1 = line-by-line\n" "# 2 or greater = scroll by 2 or more lines (only in the pager)\n" msgstr "" "# 光标向上/向下时文章页面切换将卷动的行数\n" "# 可能的值包括 (默认值以 * 标记)：\n" "# -2 = 半页卷动\n" "# -1 = 顶/底行被带入下一页\n" "# 0 = 整页卷动 (传统行为)\n" "# * 1 = 卷动一行\n" "# 2 或更大 = 卷动 2 或更多行 (只有在页面切换时)\n" #: src/lang.c:2317 msgid "Display signatures. toggles & sets." msgstr "显示签名。 切换 & 设置。" #: src/lang.c:2318 msgid "Display signatures" msgstr "显示签名" #: src/lang.c:2319 msgid "# If OFF don't show signatures when displaying articles\n" msgstr "# 如果关闭于显示文章时就不显示签名\n" #: src/lang.c:2323 #, fuzzy #| msgid "Display signatures. toggles & sets." msgid "Display article score. toggles & sets." msgstr "显示签名。 切换 & 设置。" #: src/lang.c:2324 #, fuzzy #| msgid "display last article in current thread" msgid "Display article score in pager" msgstr "显示目前讨论串中的最后一篇文章" #: src/lang.c:2325 #, fuzzy #| msgid "# If OFF don't show signatures when displaying articles\n" msgid "# If ON show article score when displaying articles\n" msgstr "# 如果关闭于显示文章时就不显示签名\n" #: src/lang.c:2330 #, fuzzy #| msgid "Display signatures. toggles & sets." msgid "Remove soft hyphens. toggles & sets." msgstr "显示签名。 切换 & 设置。" #: src/lang.c:2331 #, fuzzy #| msgid "move scope" msgid "Remove soft hyphens" msgstr "移动范围" #: src/lang.c:2332 #, fuzzy #| msgid "# If OFF don't show signatures when displaying articles\n" msgid "# If ON remove soft hyphens when displaying articles\n" msgstr "# 如果关闭于显示文章时就不显示签名\n" #: src/lang.c:2337 msgid "Display uuencoded data as tagged attachments. toggles & sets." msgstr "将 uuencoded 数据显示为已标记附件。 切换 & 设置。" #: src/lang.c:2338 msgid "Display uue data as an attachment" msgstr "将 uue 数据作为附件显示" #: src/lang.c:2339 #, fuzzy #| msgid "" #| "# Handling of uuencoded data in the pager\n" #| "# Possible values are (the default is marked with *):\n" #| "# * 0 = no, display raw uuencoded data\n" #| "# 1 = yes, uuencoded data will be condensed to a single tag line showing\n" #| "# size and filename, similar to how MIME attachments are displayed\n" #| "# 2 = hide all, as for 1, but any line that looks like uuencoded data will\n" #| "# be folded into a tag line.\n" msgid "" "# Handling of uuencoded data in the pager\n" "# Possible values are (the default is marked with *):\n" "# * 0 = No, display raw uuencoded data\n" "# 1 = Yes, uuencoded data will be condensed to a single tag line showing\n" "# size and filename, similar to how MIME attachments are displayed\n" "# 2 = Hide all, as for 1, but any line that looks like uuencoded data will\n" "# be folded into a tag line.\n" msgstr "" "# 在页面切换中处理 uuencoded 数据\n" "# 可能的值包括 (默认值以 * 标记)：\n" "# * 0 = 无，显示原始 uuencoded 数据\n" "# 1 = 是，uuencoded 数据将被压缩为单一标记行，并显示\n" "# 大小和文件名，类似于显示 MIME 附件的方式\n" "# 2 = 隐藏所有，类似 1，但是任何看来像是 uuencoded 数据的行，都将\n" "# 被折叠为一标记行。\n" #: src/lang.c:2349 msgid "Decode German style TeX umlaut codes to ISO. toggles & sets." msgstr "解码德语样式 TeX 变音编码为 ISO。 切换 & 设置。" #: src/lang.c:2350 msgid "Display \"a as Umlaut-a" msgstr "显示 \"a 为变音 a" #: src/lang.c:2351 msgid "" "# If ON decode German style TeX umlaut codes to ISO and\n" "# show \"a as Umlaut-a, etc.\n" msgstr "" "# 如果打开就解码德语样式 TeX 变音编码为 ISO 并\n" "# 显示 \"a 为变音 a ...等等\n" #: src/lang.c:2356 src/lang.c:2366 msgid "Space separated list of header fields" msgstr "以空格分隔的标头字段清单" #: src/lang.c:2357 msgid "Display these header fields (or *)" msgstr "显示这些标头字段 (或 *)" #: src/lang.c:2358 msgid "" "# Which news headers you wish to see. If you want to see _all_ the headers,\n" "# place an '*' as this value. This is the only way a wildcard can be used.\n" "# If you enter 'X-' as the value, you will see all headers beginning with\n" "# 'X-' (like X-Alan or X-Pape). You can list more than one by delimiting with\n" "# spaces. Not defining anything turns off this option.\n" msgstr "" "# 您希望看到哪些新闻标头。如果您要看到_所有_标头，\n" "# 就将‘*’作为这个值。这是通配符可以被使用的惟一方式。\n" "# 如果您输入‘X-’作为值，您将看到所有标头起始部分附上\n" "#‘X-’(像是 X-Alan 或 X-Pape)。您可以借由以空格分隔而列出\n" "# 超过一个。没有定义任何值将会关闭这个选项。\n" #: src/lang.c:2367 msgid "Do not display these header fields" msgstr "不显示这些标头字段" #: src/lang.c:2368 msgid "" "# Same as 'news_headers_to_display' except it denotes the opposite.\n" "# An example of using both options might be if you thought X- headers were\n" "# A Good Thing(tm), but thought Alan and Pape were miscreants...well then you\n" "# would do something like this:\n" "# news_headers_to_display=X-\n" "# news_headers_to_not_display=X-Alan X-Pape\n" "# Not defining anything turns off this option.\n" msgstr "" "# 如同‘news_headers_to_display’但除了它表示相反的意思。\n" "# 使用两者选项的例子之一也许是：如果您认为 X- 标头是\n" "# A Good Thing(tm)，但是认为 Alan 和 Pape 是异端...那么您\n" "# 可能会如此做：\n" "# news_headers_to_display=X-\n" "# news_headers_to_not_display=X-Alan X-Pape\n" "# 没有定义任何值就表示关闭这个选项。\n" #: src/lang.c:2378 msgid "Do you want to enable automatic handling of multipart/alternative articles?" msgstr "您要启用多部件/替代文章的自动处理吗？" #: src/lang.c:2379 msgid "Skip multipart/alternative parts" msgstr "跳过多部件/替代部分" #: src/lang.c:2380 msgid "# If ON strip multipart/alternative messages automatically\n" msgstr "# 如果打开就自动截除多部件/替代消息\n" #: src/lang.c:2384 msgid "Enable detection of verbatim blocks? toggles & sets." msgstr "启用字面区块的侦测？ 切换 & 设置。" #: src/lang.c:2385 msgid "Detection of verbatim blocks" msgstr "字面区块的侦测" #: src/lang.c:2386 msgid "# If ON detect verbatim blocks in articles\n" msgstr "# 如果打开就在文章中侦测字面区块\n" #: src/lang.c:2391 msgid "A regex used to decide which lines to show in col_quote." msgstr "用来决定在 col_quote 中要显示哪些行的 regex。" #: src/lang.c:2392 msgid "Regex used to show quoted lines" msgstr "用来显示引言行的 regex" #: src/lang.c:2393 msgid "" "# A regular expression that tin will use to decide which lines are\n" "# quoted when viewing articles. Quoted lines are shown in col_quote.\n" "# If you leave this blank, tin will use a built in default.\n" msgstr "" "# 查看文章时 tin 将用来决定某行是否为引言的\n" "# 正则表达式。引言行将以 col_quote 显示。\n" "# 如果您保留它为空白，tin 将使用内置的默认值。\n" #: src/lang.c:2399 msgid "A regex used to decide which lines to show in col_quote2." msgstr "用来决定要以 col_quote2 显示哪些行的 regex。" #: src/lang.c:2400 msgid "Regex used to show twice quoted l." msgstr "用来显示第二层引言行的 regex。" #: src/lang.c:2401 msgid "" "# A regular expression that tin will use to decide which lines are\n" "# quoted twice. Twice quoted lines are shown in col_quote2.\n" "# If you leave this blank, tin will use a built in default.\n" msgstr "" "# tin 将用来决定某行是否为第二层引言的\n" "# 正则表达式。第二层引言行将以 col_quote2 显示。\n" "# 如果您保留它为空白，tin 将使用内置的默认值。\n" #: src/lang.c:2407 msgid "A regex used to decide which lines to show in col_quote3." msgstr "用来决定要以 col_quote3 显示哪些行的 regex。" #: src/lang.c:2408 msgid "Regex used to show >= 3 times q.l." msgstr "用来显示 >= 3 层引言行的 regex。" #: src/lang.c:2409 msgid "" "# A regular expression that tin will use to decide which lines are\n" "# quoted >=3 times. >=3 times quoted lines are shown in col_quote3.\n" "# If you leave this blank, tin will use a built in default.\n" msgstr "" "# tin 将用来决定某行是否为 >= 3 层引言的\n" "# 正则表达式。>= 3 层引言行将以 col_quote3 显示。\n" "# 如果您保留它为空白，tin 将使用内置的默认值。\n" #: src/lang.c:2415 #, fuzzy #| msgid "Enable detection of verbatim blocks? toggles & sets." msgid "Enable detection of external quotes? toggles & sets." msgstr "启用字面区块的侦测？ 切换 & 设置。" #: src/lang.c:2416 #, fuzzy #| msgid "Detection of verbatim blocks" msgid "Detection of external quotes" msgstr "字面区块的侦测" #: src/lang.c:2417 #, fuzzy #| msgid "# If ON detect verbatim blocks in articles\n" msgid "# If ON detect quoted text from external sources in articles\n" msgstr "# 如果打开就在文章中侦测字面区块\n" #: src/lang.c:2421 #, fuzzy #| msgid "A regex used to decide which lines to show in col_quote." msgid "A regex used to decide which lines to show in col_extquote." msgstr "用来决定在 col_quote 中要显示哪些行的 regex。" #: src/lang.c:2422 #, fuzzy #| msgid "Regex used to show quoted lines" msgid "Regex used to show quotes from external sources" msgstr "用来显示引言行的 regex" #: src/lang.c:2423 #, fuzzy #| msgid "" #| "# A regular expression that tin will use to decide which lines are\n" #| "# quoted twice. Twice quoted lines are shown in col_quote2.\n" #| "# If you leave this blank, tin will use a built in default.\n" msgid "" "# A regular expression that tin will use to decide which lines are\n" "# external quotes. Text from external quotes is shown in col_extquote.\n" "# If you leave this blank, tin will use a built in default.\n" msgstr "" "# tin 将用来决定某行是否为第二层引言的\n" "# 正则表达式。第二层引言行将以 col_quote2 显示。\n" "# 如果您保留它为空白，tin 将使用内置的默认值。\n" #: src/lang.c:2430 msgid "A regex used to decide which words to show in col_markslashes." msgstr "用来决定要以 col_markslashes 显示哪些字词的 regex。" #: src/lang.c:2431 msgid "Regex used to highlight /slashes/" msgstr "用来高亮度标示 /斜线/ 的 regex" #: src/lang.c:2432 msgid "" "# A regular expression that tin will use to decide which words\n" "# bounded by '/' are to be shown in col_markslashes.\n" "# If you leave this blank, tin will use a built in default.\n" msgstr "" "# tin 将用来决定哪些被‘/’夹住的字词\n" "# 将以 col_markslashes 显示的正则表达式。\n" "# 如果您保留它为空白，tin 将使用内置的默认值。\n" #: src/lang.c:2438 msgid "A regex used to decide which words to show in col_markstars." msgstr "用来决定要以 col_markstars 显示哪些字词的 regex。" #: src/lang.c:2439 msgid "Regex used to highlight *stars*" msgstr "用来高亮度显示 *星号* 的 regex" #: src/lang.c:2440 msgid "" "# A regular expression that tin will use to decide which words\n" "# bounded by '*' are to be shown in col_markstars.\n" "# If you leave this blank, tin will use a built in default.\n" msgstr "" "# tin 将用来决定哪些被‘*’夹住的字词\n" "# 将以 col_markstars 显示的正则表达式。\n" "# 如果您保留它为空白，tin 将使用内置的默认值。\n" #: src/lang.c:2446 msgid "A regex used to decide which words to show in col_markstroke." msgstr "用来决定要以 col_markstroke 显示哪些字词的 regex。" #: src/lang.c:2447 msgid "Regex used to highlight -strokes-" msgstr "用来高亮度显示 -横线- 的 regex" #: src/lang.c:2448 msgid "" "# A regular expression that tin will use to decide which words\n" "# bounded by '-' are to be shown in col_markstroke.\n" "# If you leave this blank, tin will use a built in default.\n" msgstr "" "# tin 将用来决定哪些被‘-’夹住的字词\n" "# 将以 col_markstroke 显示的正则表达式。\n" "# 如果您保留它为空白，tin 将使用内置的默认值。\n" #: src/lang.c:2454 msgid "A regex used to decide which words to show in col_markdash." msgstr "用来决定要以 col_markdash 显示哪些字词的 regex。" #: src/lang.c:2455 msgid "Regex used to highlight _underline_" msgstr "用来高亮度显示 _底线_ 的 regex" #: src/lang.c:2456 msgid "" "# A regular expression that tin will use to decide which words\n" "# bounded by '_' are to be shown in col_markdash.\n" "# If you leave this blank, tin will use a built in default.\n" msgstr "" "# tin 将用来决定哪些被‘_’夹住的字词\n" "# 将以 col_markdash 显示的正则表达式。\n" "# 如果您保留它为空白，tin 将使用内置的默认值。\n" #: src/lang.c:2462 msgid "A regex used to find Subject prefixes to remove. Use '|' as separator." msgstr "用来寻找要移除的主旨前缀的 regex。 使用‘|’作为分隔符号。" #: src/lang.c:2463 msgid "Regex with Subject prefixes" msgstr "主旨前缀的 regex" #: src/lang.c:2464 msgid "" "# A regular expression that tin will use to find Subject prefixes\n" "# which will be removed before showing the header.\n" msgstr "" "# tin 将用来寻找主旨前缀的正则表达式\n" "# 于显示标头之前将被移除。\n" #: src/lang.c:2469 msgid "A regex used to find Subject suffixes to remove. Use '|' as separator." msgstr "用来寻找要移除的主旨后缀的 regex。 使用‘|’作为分隔符号。" #: src/lang.c:2470 msgid "Regex with Subject suffixes" msgstr "主旨后缀的 regex" #: src/lang.c:2471 msgid "" "# A regular expression that tin will use to find Subject suffixes\n" "# which will be removed when replying or posting followup.\n" msgstr "" "# tin 将用来寻找主旨后缀的正则表达式\n" "# 于回复或跟贴时将被移除。\n" #: src/lang.c:2476 msgid "A regex used to find the begin of a verbatim block." msgstr "用来找寻字面区块开始的 regex。" #: src/lang.c:2477 msgid "Regex for begin of a verbatim block" msgstr "用于字面区块开始的 regex" #: src/lang.c:2478 msgid "" "# A regular expression that tin will use to find the begin of\n" "# a verbatim block.\n" msgstr "# tin 将用来找寻字面区块开始的正则表达式。\n" #: src/lang.c:2483 msgid "A regex used to find the end of a verbatim block." msgstr "用来找寻字面区块结束的 regex。" #: src/lang.c:2484 msgid "Regex for end of a verbatim block" msgstr "用于字面区块结束的 regex" #: src/lang.c:2485 msgid "" "# A regular expression that tin will use to find the end of\n" "# a verbatim block.\n" msgstr "# tin 将用来找寻字面区块结束的正则表达式。\n" #: src/lang.c:2490 msgid "Enter name and options for external MIME viewer, --internal for built-in viewer" msgstr "输入外部 MIME 查看器的名称和选项，--internal 表示内置查看器" #: src/lang.c:2491 msgid "MIME binary content viewer" msgstr "MIME 二进制内容查看器" #: src/lang.c:2492 #, fuzzy #| msgid "" #| "# If --internal automatically use the built in MIME viewer for non-text\n" #| "# parts of articles.\n" #| "# Otherwise specify an external viewer program (eg, metamail) or leave blank\n" #| "# for no automatic viewing\n" msgid "" "# If --internal automatically use the built in MIME viewer for non-text\n" "# parts of articles.\n" "# Otherwise specify an external viewer program (e.g. metamail) or leave blank\n" "# for no automatic viewing\n" msgstr "" "# 如果设置了 --internal 就自动使用内置 MIME 查看器用于文章的\n" "# 非纯文本部分。\n" "# 否则请指定外部查看器程序 (例：metamail) 或保持空白以\n" "# 表示不要自动查看\n" #: src/lang.c:2499 msgid "Confirm before starting non-text viewing program" msgstr "启动非纯文本查看程序之前先确认" #: src/lang.c:2500 msgid "Ask before using MIME viewer" msgstr "使用 MIME 查看器之前先询问" #: src/lang.c:2501 msgid "" "# If ON tin will ask before using metamail to display MIME messages\n" "# this only happens if metamail_prog is set to something\n" msgstr "" "# 如果打开，tin 将于使用 metamail 显示 MIME 消息之前先询问\n" "# 只有当 metamail_prog 已设置为某个值时，这才会发生\n" #: src/lang.c:2506 msgid "Ask to mark groups read when quitting. toggles & sets." msgstr "离开时询问是否将群组标记为已读。 切换 & 设置。" #: src/lang.c:2507 msgid "Catchup read groups when quitting" msgstr "离开时将已读群组设回未读" #: src/lang.c:2508 msgid "# If ON ask user if read groups should all be marked read\n" msgstr "# 如果打开就询问用户是否所有已读群组应该都被标记为已读\n" #: src/lang.c:2513 msgid "Catchup group using left key" msgstr "使用向左键将群组设回未读" #: src/lang.c:2514 msgid "# If ON catchup group/thread when leaving with the left arrow key.\n" msgstr "# 如果打开则当以向左键离开时，将群组/讨论串设回未读。\n" #: src/lang.c:2519 msgid "Catchup thread by using left key" msgstr "使用向左键将讨论串设回未读" #: src/lang.c:2525 msgid "Which actions require confirmation" msgstr "哪些动作需要确认" #: src/lang.c:2526 #, fuzzy #| msgid "" #| "# Thread articles by ...\n" #| "# Possible values are (the default is marked with *):\n" #| "# 0 = nothing\n" #| "# 1 = Subject\n" #| "# 2 = References\n" #| "# * 3 = Both (Subject and References)\n" #| "# 4 = Multipart Subject\n" #| "# 5 = Percentage Match\n" msgid "" "# What should we ask confirmation for.\n" "# Possible values are (the default is marked with *):\n" "# 0 = none\n" "# 1 = commands\n" "# 2 = select\n" "# 3 = quit\n" "# * 4 = commands & quit\n" "# 5 = commands & select\n" "# 6 = quit & select\n" "# 7 = commands & quit & select\n" msgstr "" "# 讨论串文章依…\n" "# 可能的值包括 (默认值以 * 标记)：\n" "# 0 = 没有任何东西\n" "# 1 = 主旨\n" "# 2 = 参考\n" "# * 3 = 两者 (主旨和参考)\n" "# 4 = 多部件主旨\n" "# 5 = 百分比匹配\n" #: src/lang.c:2540 msgid "'Mark as (un)read' ignores tags" msgstr "‘标记为(未)已读’忽略标记" #: src/lang.c:2541 msgid "# If ON the 'Mark as (un)read' function marks only the current article.\n" msgstr "# 如果打开则‘标记为(未)已读’功能只会标记目前的文章。\n" #: src/lang.c:2545 msgid "Program to run to open URLs, sets, cancels." msgstr "运行以打开网址的程序， 设置， 取消。" #: src/lang.c:2546 msgid "Program that opens URLs" msgstr "打开网址的程序" #: src/lang.c:2547 msgid "# The program used to open URLs. The actual URL will be appended\n" msgstr "# 用来打开网址的程序。将会附加实际的网址\n" #: src/lang.c:2552 msgid "Use mouse in xterm" msgstr "在 xterm 中使用鼠标" #: src/lang.c:2553 msgid "# If ON enable mouse button support on xterm terminals\n" msgstr "# 如果打开就启用 xterm 终端机对于鼠标按钮的支持\n" #: src/lang.c:2559 msgid "Use scroll keys on keypad" msgstr "使用数字键盘上的卷动键" #: src/lang.c:2560 msgid "# If ON enable scroll keys on terminals that support it\n" msgstr "# 如果打开就在有支持卷动键的终端机上启用它\n" #: src/lang.c:2565 msgid "Enter maximum number of article to get. sets." msgstr "输入要提取文章的最大值数量。 设置。" #: src/lang.c:2566 msgid "Number of articles to get" msgstr "要提取文章的数量" #: src/lang.c:2567 msgid "" "# Number of articles to get (0=no limit), if negative sets maximum number\n" "# of already read articles to be read before first unread one\n" msgstr "" "# 要提取文章的数量 (0=无限制)，如果为负就设置\n" "# 为第一篇未读文章之前要读取的已读文章最大值\n" #: src/lang.c:2572 msgid "Enter number of days article is considered recent. sets." msgstr "输入被认为最近文章的日数。 设置。" #: src/lang.c:2573 msgid "Article recentness time limit" msgstr "最近文章的时间限制" #: src/lang.c:2574 msgid "# Number of days in which article is considered recent, (0=OFF)\n" msgstr "# 被认为是最近文章所需的日数，(0=关闭)\n" #: src/lang.c:2578 msgid "WILDMAT for normal wildcards, REGEX for full regular expression matching." msgstr "WILDMAT 用于一般通配符，REGEX 用于完整正则表达式匹配。" #: src/lang.c:2579 msgid "Wildcard matching" msgstr "通配符匹配" #: src/lang.c:2580 msgid "" "# Wildcard matching\n" "# Possible values are (the default is marked with *):\n" "# * 0 = wildmat\n" "# 1 = regex\n" msgstr "" "# 通配符匹配\n" "# 可能的值包括 (默认值以 * 标记)：\n" "# * 0 = wildmat\n" "# 1 = regex\n" #: src/lang.c:2587 msgid "Enter minimal score before an article is marked killed. sets." msgstr "输入文章被标记砍除之前的最少分数。 设置。" #: src/lang.c:2588 msgid "Score limit (kill)" msgstr "分数限制 (砍除)" #: src/lang.c:2589 msgid "# Score limit before an article is marked killed\n" msgstr "# 文章被标记砍除之前的分数限制\n" #: src/lang.c:2593 msgid "Enter default score to kill articles. sets." msgstr "输入砍除文章的缺省分数。 设置。" #: src/lang.c:2594 msgid "Default score to kill articles" msgstr "砍除文章的缺省分数" #: src/lang.c:2595 msgid "# Default score to kill articles\n" msgstr "# 砍除文章的缺省分数\n" #: src/lang.c:2599 msgid "Enter minimal score before an article is marked hot. sets." msgstr "输入文章被标记热门之前的最少分数。 设置。" #: src/lang.c:2600 msgid "Score limit (select)" msgstr "分数限制 (选取)" #: src/lang.c:2601 msgid "# Score limit before an article is marked hot\n" msgstr "# 文章被标记热门之前的分数限制\n" #: src/lang.c:2605 msgid "Enter default score to select articles. sets." msgstr "输入选取文章的缺省分数。 设置。" #: src/lang.c:2606 msgid "Default score to select articles" msgstr "选取文章的缺省分数" #: src/lang.c:2607 msgid "# Default score to select articles\n" msgstr "# 选取文章的缺省分数\n" #: src/lang.c:2613 msgid "Use slrnface to show ''X-Face:''s" msgstr "使用 slrnface 以显示‘X-Face:’" #: src/lang.c:2614 msgid "" "# If ON using slrnface(1) to interpret the ''X-Face:'' header.\n" "# Only useful when running in an xterm.\n" msgstr "" "# 如果打开就使用 slrnface(1) 以解译‘X-Face:’标头。\n" "# 只有在 xterm 中运行时才有作用。\n" #: src/lang.c:2622 msgid "Use ANSI color" msgstr "使用 ANSI 颜色" #: src/lang.c:2623 msgid "# If ON using ANSI-color\n" msgstr "# 如果打开就使用 ANSI 颜色\n" #: src/lang.c:2628 msgid "Standard foreground color" msgstr "标准前景颜色" #: src/lang.c:2629 msgid "" "# Standard foreground color\n" "# Default: -1 (default color)\n" msgstr "" "# 标准前景颜色\n" "# 缺省：-1 (缺省颜色)\n" #: src/lang.c:2635 msgid "Standard background color" msgstr "标准背景颜色" #: src/lang.c:2636 msgid "" "# Standard background color\n" "# Default: -1 (default color)\n" msgstr "" "# 标准背景颜色\n" "# 缺省：-1 (缺省颜色)\n" #: src/lang.c:2642 msgid "Color for inverse text (background)" msgstr "反白文本的颜色 (背景)" #: src/lang.c:2643 msgid "" "# Color of background for inverse text\n" "# Default: 4 (blue)\n" msgstr "" "# 反白文本的背景颜色\n" "# 缺省：4 (蓝色)\n" #: src/lang.c:2649 msgid "Color for inverse text (foreground)" msgstr "反白文本的颜色 (前景)" #: src/lang.c:2650 msgid "" "# Color of foreground for inverse text\n" "# Default: 7 (white)\n" msgstr "" "# 反白文本的前景颜色\n" "# 缺省：7 (白色)\n" #: src/lang.c:2656 msgid "Color of text lines" msgstr "文本行的颜色" #: src/lang.c:2657 msgid "" "# Color of text lines\n" "# Default: -1 (default color)\n" msgstr "" "# 文本行的颜色\n" "# 缺省：-1 (缺省颜色)\n" #: src/lang.c:2663 msgid "Color of mini help menu" msgstr "迷你说明菜单的颜色" #: src/lang.c:2664 msgid "" "# Color of mini help menu\n" "# Default: 3 (brown)\n" msgstr "" "# 迷你说明菜单的颜色\n" "# 缺省：3 (棕色)\n" #: src/lang.c:2670 msgid "Color of help text" msgstr "说明文本的颜色" #: src/lang.c:2671 msgid "" "# Color of help pages\n" "# Default: -1 (default color)\n" msgstr "" "# 说明页面的颜色\n" "# 缺省：-1 (缺省颜色)\n" #: src/lang.c:2677 msgid "Color of status messages" msgstr "状态消息的颜色" #: src/lang.c:2678 msgid "" "# Color of messages in last line\n" "# Default: 6 (cyan)\n" msgstr "" "# 最后一行中消息的颜色\n" "# 缺省：6 (青色)\n" #: src/lang.c:2684 msgid "Color of quoted lines" msgstr "引言行的颜色" #: src/lang.c:2685 msgid "" "# Color of quote-lines\n" "# Default: 2 (green)\n" msgstr "" "# 引言行的颜色\n" "# 缺省：2 (绿色)\n" #: src/lang.c:2691 msgid "Color of twice quoted line" msgstr "第二层引言行的颜色" #: src/lang.c:2692 msgid "" "# Color of twice quoted lines\n" "# Default: 3 (brown)\n" msgstr "" "# 第二层引言行的颜色\n" "# 缺省：3 (棕色)\n" #: src/lang.c:2698 msgid "Color of =>3 times quoted line" msgstr "=>3 层引言行的颜色" #: src/lang.c:2699 msgid "" "# Color of >=3 times quoted lines\n" "# Default: 4 (blue)\n" msgstr "" "# =>3 层引言行的颜色\n" "# 缺省：4 (蓝色)\n" #: src/lang.c:2705 msgid "Color of article header lines" msgstr "标头行的颜色" #: src/lang.c:2706 msgid "" "# Color of header-lines\n" "# Default: 2 (green)\n" msgstr "" "# 标头行的颜色\n" "# 缺省：2 (绿色)\n" #: src/lang.c:2712 msgid "Color of actual news header fields" msgstr "实际新闻标头字段的颜色" #: src/lang.c:2713 msgid "" "# Color of actual news header fields\n" "# Default: 9 (light red)\n" msgstr "" "# 实际新闻标头字段的颜色\n" "# 缺省：9 (浅红色)\n" #: src/lang.c:2719 msgid "Color of article subject lines" msgstr "文章主旨行的颜色" #: src/lang.c:2720 msgid "" "# Color of article subject\n" "# Default: 6 (cyan)\n" msgstr "" "# 文章主旨行的颜色\n" "# 缺省：6 (青色)\n" #: src/lang.c:2726 #, fuzzy #| msgid "Color of text lines" msgid "Color of external quotes" msgstr "文本行的颜色" #: src/lang.c:2727 #, fuzzy #| msgid "" #| "# Color of verbatim blocks\n" #| "# Default: 5 (pink)\n" msgid "" "# Color of quoted text from external sources\n" "# Default: 5 (pink)\n" msgstr "" "# 字面区块的颜色\n" "# 缺省：5 (粉红)\n" #: src/lang.c:2733 msgid "Color of response counter" msgstr "回应计数器的颜色" #: src/lang.c:2734 msgid "" "# Color of response counter\n" "# Default: 2 (green)\n" msgstr "" "# 回应计数器的颜色\n" "# 缺省：2 (绿色)\n" #: src/lang.c:2740 msgid "Color of sender (From:)" msgstr "发送者的颜色 ( From: )" #: src/lang.c:2741 msgid "" "# Color of sender (From:)\n" "# Default: 2 (green)\n" msgstr "" "# 发送者的颜色 ( From: )\n" "# 缺省：2 (绿色)\n" #: src/lang.c:2747 msgid "Color of help/mail sign" msgstr "说明/邮件签名的颜色" #: src/lang.c:2748 msgid "" "# Color of Help/Mail-Sign\n" "# Default: 4 (blue)\n" msgstr "" "# 说明/邮件签名的颜色\n" "# 缺省：4 (蓝色)\n" #: src/lang.c:2754 msgid "Color of signatures" msgstr "签名的颜色" #: src/lang.c:2755 msgid "" "# Color of signature\n" "# Default: 4 (blue)\n" msgstr "" "# 签名的颜色\n" "# 缺省：4 (蓝色)\n" #: src/lang.c:2761 #, fuzzy #| msgid "Color of text lines" msgid "Color of negative score" msgstr "文本行的颜色" #: src/lang.c:2762 #, fuzzy #| msgid "" #| "# Color of signature\n" #| "# Default: 4 (blue)\n" msgid "" "# Color of negative score\n" "# Default: 1 (red)\n" msgstr "" "# 签名的颜色\n" "# 缺省：4 (蓝色)\n" #: src/lang.c:2768 #, fuzzy #| msgid "Color of response counter" msgid "Color of positive score" msgstr "回应计数器的颜色" #: src/lang.c:2769 #, fuzzy #| msgid "" #| "# Color of response counter\n" #| "# Default: 2 (green)\n" msgid "" "# Color of positive score\n" "# Default: 2 (green)\n" msgstr "" "# 回应计数器的颜色\n" "# 缺省：2 (绿色)\n" #: src/lang.c:2775 msgid "Color of highlighted URLs" msgstr "高亮度网址的颜色" #: src/lang.c:2776 msgid "" "# Color of highlighted URLs\n" "# Default: -1 (default color)\n" msgstr "" "# 高亮度网址的颜色\n" "# 缺省：-1 (缺省颜色)\n" #: src/lang.c:2782 msgid "Color of verbatim blocks" msgstr "字面区块的颜色" #: src/lang.c:2783 msgid "" "# Color of verbatim blocks\n" "# Default: 5 (pink)\n" msgstr "" "# 字面区块的颜色\n" "# 缺省：5 (粉红)\n" #: src/lang.c:2789 msgid "Color of highlighting with *stars*" msgstr "高亮度显示 *星号* 的颜色" #: src/lang.c:2790 msgid "" "# Color of word highlighting with *stars*\n" "# Default: 11 (yellow)\n" msgstr "" "# 高亮度显示 *星号* 字词的颜色\n" "# 缺省：11 (黄色)\n" #: src/lang.c:2796 msgid "Color of highlighting with _dash_" msgstr "高亮度显示 _底线_ 的颜色" #: src/lang.c:2797 msgid "" "# Color of word highlighting with _dash_\n" "# Default: 13 (light pink)\n" msgstr "" "# 高亮度显示 _底线_ 字词的颜色\n" "# 缺省：13 (浅粉红)\n" #: src/lang.c:2803 msgid "Color of highlighting with /slash/" msgstr "高亮度显示 /斜线/ 的颜色" #: src/lang.c:2804 msgid "" "# Color of word highlighting with /slash/\n" "# Default: 14 (light cyan)\n" msgstr "" "# 高亮度显示 /斜线/ 字词的颜色\n" "# 缺省：14 (浅蓝绿色)\n" #: src/lang.c:2810 msgid "Color of highlighting with -stroke-" msgstr "高亮度显示 -横线- 的颜色" #: src/lang.c:2811 msgid "" "# Color of word highlighting with -stroke-\n" "# Default: 12 (light blue)\n" msgstr "" "# 高亮度显示 -横线- 字词的颜色\n" "# 缺省：12 (浅蓝色)\n" #: src/lang.c:2818 msgid "Attr. of highlighting with *stars*" msgstr "高亮度显示 *星号* 的属性" #: src/lang.c:2819 msgid "" "# Attributes of word highlighting on mono terminals\n" "# Possible values are:\n" "# 0 = Normal\n" "# 1 = Underline\n" "# 2 = Best highlighting\n" "# 3 = Reverse video\n" "# 4 = Blinking\n" "# 5 = Half bright\n" "# 6 = Bold\n" "\n" "# Attribute of word highlighting with *stars*\n" "# Default: 6 (bold)\n" msgstr "" "# 於单色终端机高亮度显示字词的属性\n" "# 可能的值包括：\n" "# 0 = 一般\n" "# 1 = 底线\n" "# 2 = 最佳高亮度显示\n" "# 3 = 反白显示\n" "# 4 = 闪动\n" "# 5 = 半明亮\n" "# 6 = 粗体\n" "\n" "# 高亮度显示 *星号* 字词的属性\n" "# 缺省：6 (粗体)\n" #: src/lang.c:2834 msgid "Attr. of highlighting with _dash_" msgstr "高亮度显示 _底线_ 的属性" #: src/lang.c:2835 msgid "" "# Attribute of word highlighting with _dash_\n" "# Default: 2 (best highlighting)\n" msgstr "" "# 高亮度显示 _底线_ 字词的属性\n" "# 缺省：2 (最好高亮度显示)\n" #: src/lang.c:2841 msgid "Attr. of highlighting with /slash/" msgstr "高亮度显示 /斜线/ 的属性" #: src/lang.c:2842 msgid "" "# Attribute of word highlighting with /slash/\n" "# Default: 5 (half bright)\n" msgstr "" "# 高亮度显示 /斜线/ 字词的属性\n" "# 缺省：5 (半明亮)\n" #: src/lang.c:2848 msgid "Attr. of highlighting with -stroke-" msgstr "高亮度显示 -横线- 的属性" #: src/lang.c:2849 msgid "" "# Attribute of word highlighting with -stroke-\n" "# Default: 3 (reverse video)\n" msgstr "" "# 高亮度显示 /斜线/ 字词的属性\n" "# 缺省：3 (反白显示)\n" #: src/lang.c:2855 msgid "URL highlighting in message body" msgstr "在消息内文中高亮度显示网址" #: src/lang.c:2856 msgid "# Enable URL highlighting?\n" msgstr "# 启用高亮度显示网址？\n" #: src/lang.c:2861 msgid "Word highlighting in message body" msgstr "在消息内文中高亮度显示字词" #: src/lang.c:2862 msgid "# Enable word highlighting?\n" msgstr "# 启用高亮度显示字词？\n" #: src/lang.c:2867 msgid "What to display instead of mark" msgstr "要显示什么以代替标记" #: src/lang.c:2868 msgid "" "# Should the leading and ending stars and dashes also be displayed,\n" "# even when they are highlighting marks?\n" "# Possible values are (the default is marked with *):\n" "# 0 = no\n" "# 1 = yes, display mark\n" "# * 2 = print a space instead\n" msgstr "" "# 前导和结束的星号和横线也应该要显示，\n" "# 即使它们是高亮度显示的标记吗？\n" "# 可能的值包括 (默认值以 * 标记)：\n" "# 0 = 否\n" "# 1 = 是，显示标记\n" "# * 2 = 印出空格作为替代\n" #: src/lang.c:2877 msgid "Enter column number to wrap article lines to in the pager. sets." msgstr "输入在页面切换中用来将文章换行的栏号。 设置。" #: src/lang.c:2878 msgid "Page line wrap column" msgstr "页面自动换行栏号" #: src/lang.c:2879 msgid "# Wrap article lines at column\n" msgstr "# 文章换行于栏号\n" #: src/lang.c:2883 #, fuzzy #| msgid "Add signature when reposting articles. toggles & sets." msgid "If ON, don't break words when wrapping lines. toggles & sets." msgstr "重新张贴文章时加入签名。 切换 & 设置。" #: src/lang.c:2884 msgid "Don't break words when wrapping" msgstr "" #: src/lang.c:2885 msgid "# Don't break long lines inside a word but on or \n" msgstr "" #: src/lang.c:2890 msgid "Wrap around threads on next unread" msgstr "于下一篇未读回到开始部分讨论串" #: src/lang.c:2891 msgid "# If ON wrap around threads on searching next unread article\n" msgstr "# 如果打开就于搜索下一篇未读文章时回到开始部分讨论串\n" #: src/lang.c:2895 msgid "Enter default mail address (and fullname). sets." msgstr "输入缺省邮件地址 (以及全名)。 设置。" #: src/lang.c:2896 src/lang.c:3474 msgid "Mail address (and fullname)" msgstr "邮件地址 (以及全名)" #: src/lang.c:2897 msgid "# User's mail address (and fullname), if not username@host (fullname)\n" msgstr "# 用户邮件地址 (以及全名)，如果不是 用户名@主机 (全名)\n" #: src/lang.c:2902 msgid "Show empty Followup-To in editor" msgstr "在编辑器中显示空的跟贴" #: src/lang.c:2903 msgid "# If ON show empty Followup-To header when editing an article\n" msgstr "# 如果打开就于编辑文章时显示空的跟贴标头\n" #: src/lang.c:2907 msgid "Enter path/! command/--none to create your default signature. sets." msgstr "输入 path/! command/--none 以创建您的缺省签名。 设置。" #: src/lang.c:2908 msgid "Create signature from path/command" msgstr "从路径/命令创建签名" #: src/lang.c:2909 #, fuzzy, c-format #| msgid "" #| "# Signature path (random sigs)/file to be used when posting/replying\n" #| "# sigfile=file appends file as signature\n" #| "# sigfile=!command executes external command to generate a signature\n" #| "# sigfile=--none don't append a signature\n" msgid "" "# Signature path (random sigs)/file to be used when posting/replying\n" "# sigfile=file appends file as signature\n" "# sigfile=!command executes external command to generate a signature\n" "# (specify %G to pass name of current newsgroup)\n" "# sigfile=--none don't append a signature\n" msgstr "" "# 张贴/回复时使用的签名路径 (随机签名)/文件\n" "# sigfile=文件 作为签名的附加文件\n" "# sigfile=!命令 运行外部命令以产生签名\n" "# sigfile=--none 不附加签名\n" #: src/lang.c:2917 msgid "Prepend signature with \"-- \" on own line. toggles & sets." msgstr "将单独一行的“-- ”前置于签名。 切换 & 设置。" #: src/lang.c:2918 msgid "Prepend signature with \"-- \"" msgstr "将“-- ”前置于签名" #: src/lang.c:2919 msgid "# If ON prepend the signature with dashes '\\n-- \\n'\n" msgstr "# 如果打开就将虚线‘\\n-- \\n’前置于签名\n" #: src/lang.c:2923 msgid "Add signature when reposting articles. toggles & sets." msgstr "重新张贴文章时加入签名。 切换 & 设置。" #: src/lang.c:2924 msgid "Add signature when reposting" msgstr "重新张贴时加入签名" #: src/lang.c:2925 msgid "# If ON add signature to reposted articles\n" msgstr "# 如果打开就将签名加入重新张贴的文章\n" #: src/lang.c:2929 #, fuzzy #| msgid "Enter quotation marks, %s or %S for author's initials." msgid "Enter quotation marks, %I for author's initials." msgstr "输入引言符号、%s 或 %S 作为作者的缩写。" #: src/lang.c:2930 msgid "Characters used as quote-marks" msgstr "作为引言符号使用的字符" #: src/lang.c:2931 #, fuzzy #| msgid "" #| "# Characters used in quoting to followups and replies.\n" #| "# '_' is replaced by ' ', %s, %S are replaced by author's initials.\n" msgid "" "# Characters used in quoting to followups and replies.\n" "# '_' is replaced by ' ', %I is replaced by author's initials.\n" msgstr "" "# 字符已用于引言到跟随和回复。\n" "#‘_’被置换由‘ ’，%s，%S 被置换依作者设置缩写。\n" #: src/lang.c:2937 msgid "Quoting behavior" msgstr "引言行为" #: src/lang.c:2938 msgid "" "# How quoting should be handled when following up or replying.\n" "# Possible values are (the default is marked with *):\n" "# 0 = Nothing special\n" "# 1 = Compress quotes\n" "# 2 = Quote signatures\n" "# 3 = Compress quotes, quote signatures\n" "# 4 = Quote empty lines\n" "# * 5 = Compress quotes, quote empty lines\n" "# 6 = Quote signatures, quote empty lines\n" "# 7 = Compress quotes, quote signatures, quote empty lines\n" msgstr "" "# 当跟贴或回复时应该如何处理引言。\n" "# 可能的值包括 (默认值以 * 标记)：\n" "# 0 = 没什么特别\n" "# 1 = 压缩引言\n" "# 2 = 引用签名\n" "# 3 = 压缩引言，引用签名\n" "# 4 = 引用空行\n" "# * 5 = 压缩引言，引用空行\n" "# 6 = 引用签名，引用空行\n" "# 7 = 压缩引言，引用签名，引用空行\n" #: src/lang.c:2951 src/lang.c:2959 src/lang.c:2965 msgid "%A Addr %D Date %F Addr+Name %G Groupname %M Message-ID %N Name %C First Name" msgstr "%A 地址 %D 日期 %F 地址+名称 %G 群组名称 %M 消息识别号 %N 名称 %C 名字" #: src/lang.c:2952 msgid "Quote line when following up" msgstr "跟贴时的引言行" #: src/lang.c:2953 msgid "" "# Format of quote line when mailing/posting/following-up an article\n" "# %A Address %D Date %F Addr+Name %G Groupname %M Message-ID\n" "# %N Full Name %C First Name %I Initials\n" msgstr "" "# 格式的引言行时邮寄/贴文/following-up 文章\n" "# %A 地址 %D 日期 %F Addr+名称 %G 群组名称 %M 消息识别号\n" "# %N 全名 %C 名字 %I 缩写\n" #: src/lang.c:2960 msgid "Quote line when cross-posting" msgstr "跨板张贴时的引言行" #: src/lang.c:2966 msgid "Quote line when mailing" msgstr "邮寄时的引言行" #: src/lang.c:2971 msgid "If ON, include User-Agent: header. toggles & sets." msgstr "如果打开就包含 User-Agent: 标头。 切换 & 设置。" #: src/lang.c:2972 msgid "Insert 'User-Agent:' header" msgstr "插入‘User-Agent:’标头" #: src/lang.c:2973 msgid "# If ON include advertising User-Agent: header\n" msgstr "# 如果打开就包含作为通告的 User-Agent: 标头\n" #: src/lang.c:2978 msgid "Enter charset name for MIME (e.g. US-ASCII, ISO-8859-1, EUC-KR), to set." msgstr "输入用于 MIME 的字符集名称 (例如：US-ASCII, ISO-8859-1, EUC-KR)， 以设置。" #: src/lang.c:2979 msgid "MM_CHARSET" msgstr "MM_CHARSET" #: src/lang.c:2980 msgid "" "# Charset supported locally which is also used for MIME header and\n" "# Content-Type header.\n" "# If not set, the value of the environment variable MM_CHARSET is used.\n" "# Set to US-ASCII or compile time default if neither of them is defined.\n" "# If MIME_STRICT_CHARSET is defined at compile-time, charset other than\n" "# mm_charset is considered not displayable and represented as '?'.\n" msgstr "" "# 本地支持的字符集，它同时用于 MIME 标头和\n" "# 内容类型标头。\n" "# 如果未设置，将会使用环境变量 MM_CHARSET 的值。\n" "# 如果它们都没有被定义，就设置为 US-ASCII 或编译时期的默认值。\n" "# 如果 MIME_STRICT_CHARSET 于编译时期被定义，那么 mm_charset 以外的\n" "# 字符集将被认为无法显示，并且以‘？’的方式表述。\n" #: src/lang.c:2990 msgid "MM_NETWORK_CHARSET" msgstr "MM_NETWORK_CHARSET" #: src/lang.c:2991 msgid "# Charset used for MIME (Content-Type) header in postings.\n" msgstr "# 在贴文中作为 MIME (内容类型) 标头的字符集。\n" #: src/lang.c:2995 msgid "Enter local charset name (e.g. US-ASCII, ISO-8859-1, EUC-KR), to set." msgstr "输入本地字符集名称 (例如：US-ASCII, ISO-8859-1, EUC-KR)， 以设置。" #: src/lang.c:2996 msgid "MM_LOCAL_CHARSET" msgstr "MM_LOCAL_CHARSET" #: src/lang.c:2997 msgid "# Charset supported locally.\n" msgstr "# 本地支持的字符集。\n" #: src/lang.c:3004 msgid "Mailbox format" msgstr "信箱格式" #: src/lang.c:3005 msgid "# Format of the mailbox.\n" msgstr "# 信箱的格式。\n" #: src/lang.c:3010 msgid "MIME encoding in news messages" msgstr "在新闻消息中的 MIME 编码" #: src/lang.c:3011 msgid "" "# MIME encoding (8bit, base64, quoted-printable, 7bit) of the body\n" "# for mails and posts, if necessary. QP is efficient for most European\n" "# character sets (ISO-8859-X) with small fraction of non-US-ASCII chars,\n" "# while Base64 is more efficient for most 8bit East Asian, Greek, and\n" "# Russian charsets with a lot of 8bit characters.\n" msgstr "" "# 内文的 MIME 编码 (8bit, base64, quoted-printable, 7bit)，\n" "# 于必要时用于邮件和贴文。QP 对于包含小部分非 US-ASCII 字符\n" "# 的多数欧洲字符集 (ISO-8859-X) 相当好用，\n" "# 而 Base64 对于包含很多 8 比特字符的多数 8 比特东亚诸语、\n" "# 希腊语以及俄语字符集来说更为适当。\n" #: src/lang.c:3019 src/lang.c:3040 msgid "Don't change unless you know what you are doing. cancels." msgstr "不要变更，除非您知道您在做什么。 取消。" #: src/lang.c:3020 msgid "Use 8bit characters in news headers" msgstr "在新闻标头中使用 8 比特字符" #: src/lang.c:3021 msgid "" "# If ON, 8bit characters in news headers are NOT encoded.\n" "# default is OFF. Thus 8bit characters are encoded by default.\n" "# 8bit chars in header are encoded regardless of the value of this\n" "# parameter unless post_mime_encoding is 8bit as well.\n" msgstr "" "# 如果打开，新闻标头中的 8 比特字符将不被编码。\n" "# 缺省为关闭。因此 8 比特字符按照缺省将被编码。\n" "# 除非 post_mime_encoding 同样也被设置为 8 比特，\n" "# 否则标头中的 8 比特字符将无视于此参数而被编码。\n" #: src/lang.c:3028 msgid "Auto-view post-processed files toggles, sets, cancels." msgstr "自动查看处理后文件 切换， 设置， 取消。" #: src/lang.c:3029 msgid "View post-processed files" msgstr "查看处理后文件" #: src/lang.c:3030 msgid "# If set, post processed files will be opened in a viewer\n" msgstr "# 如果设置，处理之后的文件将在查看器中被打开\n" #: src/lang.c:3035 msgid "MIME encoding in mail messages" msgstr "邮件消息中的 MIME 编码" #: src/lang.c:3041 msgid "Use 8bit characters in mail headers" msgstr "邮件标头中使用 8 比特字符" #: src/lang.c:3042 msgid "" "# If ON, 8bit characters in mail headers are NOT encoded.\n" "# default is OFF. Thus 8bit characters are encoded by default.\n" "# 8bit chars in headers are encoded regardless of the value of this parameter\n" "# unless mail_mime_encoding is 8bit as well. Note that RFC 2822\n" "# prohibits 8bit characters in mail headers so that you are advised NOT to\n" "# turn it ON unless you have some compelling reason.\n" msgstr "" "# 如果打开就不会将邮件标头中的 8 比特字符编码。\n" "# 缺省是关闭，因此 8 比特字符按照缺省会被编码。\n" "# 邮件标头中的 8 比特字符将会编码而忽略这个参数的值\n" "# 除非 mail_mime_encoding 同样被设置为 8 比特。要注意的是，RFC 2822\n" "# 禁止邮件标头中的 8 比特字符，因此建议您不要将它打开，\n" "# 除非您有某些强制的原因。\n" #: src/lang.c:3053 msgid "Strip blanks from ends of lines" msgstr "从行尾截除空白" #: src/lang.c:3054 msgid "# If ON strip blanks from ends of lines for faster display on slow terminals.\n" msgstr "# 如果打开就从行尾截除空白，以便在较慢终端机上能较快显示。\n" #: src/lang.c:3060 msgid "If ON, use transliteration. toggles & sets." msgstr "如果打开就使用字面量转译。 切换 & 设置。" #: src/lang.c:3061 msgid "Transliteration" msgstr "字面量转译" #: src/lang.c:3062 msgid "" "# If ON, use //TRANSLIT extension. This means that when a character cannot\n" "# be represented in the in the target character set, it can be approximated\n" "# through one or several similarly looking characters.\n" msgstr "" "# 如果打开就使用 //TRANSLIT 扩充功能。这表示当某字符无法\n" "# 在目标字符集中被表述时，它可以透过一个\n" "# 或多个外观类似的字符所近似显示。\n" #: src/lang.c:3070 msgid "Send you a Cc/Bcc automatically" msgstr "自动发送给您一份副本/密件副本" #: src/lang.c:3071 msgid "" "# Put your name in the Cc: and/or Bcc: field when mailing an article.\n" "# Possible values are (the default is marked with *):\n" "# * 0 = No\n" "# 1 = Cc\n" "# 2 = Bcc\n" "# 3 = Cc and Bcc\n" msgstr "" "# 邮寄文章时将您的姓名放在 Cc: 和/或 Bcc: 字段中。\n" "# 可能的值包括 (默认值以 * 标记)：\n" "# * 0 = 否\n" "# 1 = 副本\n" "# 2 = 密件副本\n" "# 3 = 副本和密件副本\n" #: src/lang.c:3082 msgid "Hash algorithm for Cancel-Lock/Cancel-Key" msgstr "" #: src/lang.c:3083 msgid "" "# Hash algorithm for Cancel-Lock/Cancel-Key (default 'sha1')\n" "# Use 'none' to not generate Cancel-Lock headers.\n" msgstr "" #: src/lang.c:3089 msgid "Enter address elements about which you want to be warned. sets." msgstr "输入您想要获得相关警告的地址因素。 设置。" #: src/lang.c:3090 msgid "Spamtrap warning address parts" msgstr "垃圾邮件抓取警告的地址部分" #: src/lang.c:3091 msgid "" "# A comma-delimited list of address-parts you want to be warned\n" "# about when trying to reply by email.\n" msgstr "" "# 当您尝试以电子邮件回复时\n" "# 想要获得相关警告而以逗号分隔的地址部分清单。\n" #: src/lang.c:3096 msgid "Enter default number of days a filter entry will be valid. sets." msgstr "输入筛选器条目保持有效的缺省天数。 设置。" #: src/lang.c:3097 msgid "No. of days a filter entry is valid" msgstr "筛选器条目有效天数" #: src/lang.c:3098 msgid "# Number of days a short term filter will be active\n" msgstr "# 短期筛选器保持作用的天数\n" #: src/lang.c:3102 msgid "Add posted articles to filter. toggles & sets." msgstr "加入已张贴文章到筛选器。 切换 & 设置。" #: src/lang.c:3103 msgid "Add posted articles to filter" msgstr "加入已张贴文章到筛选器" #: src/lang.c:3104 msgid "" "# If ON add posted articles which start a new thread to filter for\n" "# highlighting follow-ups\n" msgstr "" "# 如果打开就加入开始新讨论串的已张贴文章到筛选器\n" "# 作为高亮度显示跟贴\n" #: src/lang.c:3108 msgid "The directory where articles/threads are to be saved in mailbox format." msgstr "将以 mailbox 格式保存的文章/讨论串目录位置。" #: src/lang.c:3109 msgid "Mail directory" msgstr "邮件目录" #: src/lang.c:3110 msgid "# (-m) directory where articles/threads are saved in mailbox format\n" msgstr "# (-m) 以 mailbox 格式保存的文章/讨论串目录位置\n" #: src/lang.c:3115 msgid "Save articles in batch mode (-S)" msgstr "以批次模式保存文章 (-S)" #: src/lang.c:3116 msgid "" "# If ON articles/threads will be saved in batch mode when save -S\n" "# or mail (-M/-N) is specified on the command line\n" msgstr "" "# 如果打开就于命令行上指定保存 -S 或邮寄 (-M/-N) 时\n" "# 以批次模式保存文章/讨论串\n" #: src/lang.c:3121 msgid "The directory where you want articles/threads saved." msgstr "您想要保存文章/讨论串的目录位置。" #: src/lang.c:3122 msgid "Directory to save arts/threads in" msgstr "要保存文章/讨论串的目录" #: src/lang.c:3123 msgid "# Directory where articles/threads are saved\n" msgstr "# 保存文章/讨论串的目录位置\n" #: src/lang.c:3127 msgid "Mark saved articles/threads as read. toggles, sets, cancels." msgstr "将已保存的文章/讨论串标记为已读。 切换， 设置， 取消。" #: src/lang.c:3128 msgid "Mark saved articles/threads as read" msgstr "将已保存的文章/讨论串标记为已读" #: src/lang.c:3129 msgid "# If ON mark articles that are saved as read\n" msgstr "# 如果打开就标记已保存的文章为已读\n" #: src/lang.c:3133 #, fuzzy #| msgid "Do post processing (eg. extract attachments) for saved articles." msgid "Do post processing (e.g. extract attachments) for saved articles." msgstr "对于已保存的文章进行后续处理 (例如：截取附件)。" #: src/lang.c:3134 msgid "Post process saved articles" msgstr "后续处理已保存的文章" #: src/lang.c:3135 #, fuzzy #| msgid "" #| "# Perform post processing (saving binary attachments) from saved articles.\n" #| "# Possible values are (the default is marked with *):\n" #| "# * 0 = no\n" #| "# 1 = extract shell archives (shar) only\n" #| "# 2 = yes\n" msgid "" "# Perform post processing (saving binary attachments) from saved articles.\n" "# Possible values are (the default is marked with *):\n" "# * 0 = No\n" "# 1 = extract shell archives (shar) only\n" "# 2 = Yes\n" msgstr "" "# 对已保存的文章施行后续处理 (保存二进制附件)。\n" "# 可能的值包括 (默认值以 * 标记)：\n" "# * 0 = 否\n" "# 1 = 只截取命令壳归档 (shar)\n" "# 2 = 是\n" #: src/lang.c:3144 msgid "Process only unread articles" msgstr "只处理未读文章" #: src/lang.c:3145 msgid "# If ON only save/print/pipe/mail unread articles (tagged articles excepted)\n" msgstr "# 如果打开就只 保存/打印/管道/邮寄 未读文章 (除了已标记文章)\n" #: src/lang.c:3150 msgid "Print all or just part of header. toggles & sets." msgstr "打印所有或是仅仅部分的标头。 切换 & 设置。" #: src/lang.c:3151 msgid "Print all headers when printing" msgstr "打印时打印所有标头" #: src/lang.c:3152 msgid "# If ON print all of article header otherwise just the important lines\n" msgstr "# 如果打开就打印所有的文章标头，否则仅打印重要行\n" #: src/lang.c:3156 msgid "The printer program with options that is to be used to print articles/threads." msgstr "将被用来打印文章/讨论串的打印程序以及选项。" #: src/lang.c:3157 msgid "Printer program with options" msgstr "打印程序以及选项" #: src/lang.c:3158 msgid "# Print program with parameters used to print articles/threads\n" msgstr "# 用来打印文章/讨论串的打印程序以及参数\n" #: src/lang.c:3164 msgid "Force redraw after certain commands" msgstr "特定命令之后强制重绘" #: src/lang.c:3165 msgid "# If ON a screen redraw will always be done after certain external commands\n" msgstr "# 如果打开就于特定外部命令之后将一律完成屏幕重绘\n" #: src/lang.c:3169 msgid "Enter %E for editor, %F for filename, %N for line-number, to set." msgstr "输入 %E 作为编辑器，%F 作为文件名，%N 作为行号， 以设置。" #: src/lang.c:3170 msgid "Invocation of your editor" msgstr "调用您的编辑器" #: src/lang.c:3171 msgid "" "# Format of editor line including parameters\n" "# %E Editor %F Filename %N Linenumber\n" msgstr "" "# 格式的编辑器行包含参数\n" "# %E 编辑器 %F 文件名 %N Linenumber\n" #: src/lang.c:3176 msgid "Enter name and options for external-inews, --internal for internal inews" msgstr "输入用于外部 inews 的名称和选项，--internal 用于内部 inews" #: src/lang.c:3177 msgid "External inews" msgstr "外部 inews" #: src/lang.c:3178 msgid "" "# If --internal use the built in mini inews for posting via NNTP\n" "# otherwise use an external inews program\n" msgstr "" "# 如果设置 --internal 就使用内置的迷你 inews 作为透过 NNTP 张贴\n" "# 否则使用外部 inews 程序\n" #: src/lang.c:3182 msgid "Enter %M for mailer, %S for subject, %T for to, %F for filename, to set." msgstr "输入 %M 作为邮件程序，%S 作为主旨，%T 作为收件者，%F 作为文件名， 以设置。" #: src/lang.c:3183 msgid "Invocation of your mail command" msgstr "调用您的邮寄命令" #: src/lang.c:3184 #, fuzzy #| msgid "" #| "# Format of mailer line including parameters\n" #| "# %M Mailer %S Subject %T To %F Filename\n" #| "# ie. to use elm as your mailer: elm -s \"%S\" \"%T\" < %F\n" #| "# ie. elm interactive : elm -i %F -s \"%S\" \"%T\"\n" msgid "" "# Format of mailer line including parameters\n" "# %M Mailer %S Subject %T To %F Filename %U Username\n" "# e.g. mutt interactive: mutt -H %F\n" msgstr "" "# 格式的邮件程序行包含参数\n" "# %M 邮件程序 %S 主旨 %T 到 %F 文件名\n" "# 我。以使用 elm 作为您的邮件程序： elm -s“%S”“%T”<%F\n" "# 我。elm 交互式 ： elm -i %F -s“%S”“%T”\n" #: src/lang.c:3191 msgid "Use interactive mail reader" msgstr "使用交互式邮件阅读器" #: src/lang.c:3192 msgid "" "# Interactive mailreader\n" "# Possible values are (the default is marked with *):\n" "# * 0 = no interactive mailreader\n" "# 1 = use interactive mailreader with headers in file\n" "# 2 = use interactive mailreader without headers in file\n" msgstr "" "# 交互式邮件阅读器\n" "# 可能的值包括 (默认值以 * 标记)：\n" "# * 0 = 非交互式邮件阅读器\n" "# 1 = 使用交互式邮件阅读器以及文件中的标头\n" "# 2 = 使用交互式邮件阅读器而无需文件中的标头\n" #: src/lang.c:3201 msgid "Remove ~/.article after posting" msgstr "张贴之后移除 ~/.article" #: src/lang.c:3202 msgid "# If ON remove ~/.article after posting.\n" msgstr "# 如果打开就于张贴之后移除 ~/.article。\n" #: src/lang.c:3208 msgid "Use UTF-8 graphics (thread tree etc.)" msgstr "使用 UTF-8 图形 (树状讨论串等等…)" #: src/lang.c:3209 msgid "# If ON use UTF-8 characters for indicator '->', tree and ellipsis '...'.\n" msgstr "# 如果打开就使用 UTF-8 字符作为指示器‘->’、树状结构和省略符号‘…’。\n" #: src/lang.c:3214 msgid "Filename for all posted articles, sets, no filename=do not save." msgstr "用于所有已张贴文章的文件名， 设置，没有文件名=不保存。" #: src/lang.c:3215 msgid "Filename for posted articles" msgstr "用于已张贴文章的文件名" #: src/lang.c:3216 msgid "" "# Filename where to keep all postings (default posted)\n" "# If no filename is set then postings will not be saved\n" msgstr "" "# 保留所有贴文 (缺省为已张贴) 的文件位置\n" "# 如果没有设置文件名则不会保存贴文\n" #: src/lang.c:3221 msgid "Keep all failed articles in ~/dead.articles. toggles & sets." msgstr "保留所有张贴失败的文章于 ~/dead.articles。 切换 & 设置。" #: src/lang.c:3222 msgid "Keep failed arts in ~/dead.articles" msgstr "保留张贴失败的文章于 ~/dead.articles" #: src/lang.c:3223 msgid "# If ON keep all failed postings in ~/dead.articles\n" msgstr "# 如果打开就保留所有张贴失败的贴文于 ~/dead.articles\n" #: src/lang.c:3227 msgid "Do you want to strip unsubscribed groups from .newsrc" msgstr "您要从 .newsrc 截除已取消订阅的群组" #: src/lang.c:3228 msgid "No unsubscribed groups in newsrc" msgstr "在 newsrc 中没有已取消订阅的群组" #: src/lang.c:3229 msgid "# If ON strip unsubscribed groups from newsrc\n" msgstr "# 如果打开就从 newsrc 截除已取消订阅的群组\n" #: src/lang.c:3234 msgid "Remove bogus groups from newsrc" msgstr "从 newsrc 移除假造的群组" #: src/lang.c:3235 msgid "" "# What to do with bogus groups in newsrc file\n" "# Possible values are (the default is marked with *):\n" "# * 0 = keep\n" "# 1 = remove\n" "# 2 = highlight with D on selection screen\n" msgstr "" "# 要如何处理 newsrc 文件中假造的群组\n" "# 可能的值包括 (默认值以 * 标记)：\n" "# * 0 = 保留\n" "# 1 = 移除\n" "# 2 = 以 D 高亮度显示于选择屏幕\n" #: src/lang.c:3244 msgid "Enter number of seconds to wait for a response from the server. sets." msgstr "输入从服务器等待回应的秒数。 表示设置。" #: src/lang.c:3245 msgid "NNTP read timeout in seconds" msgstr "NNTP 读取超时的秒数" #: src/lang.c:3246 msgid "# Time in seconds to wait for a response from the server (0=no timeout)\n" msgstr "# 从服务器等待回应的秒数时间 (0=没有超时限制)\n" #: src/lang.c:3251 msgid "Enter number of seconds until active file will be reread. sets." msgstr "输入重新读取现用文件的间隔秒数。 设置。" #: src/lang.c:3252 msgid "Interval in secs to reread active" msgstr "重新读取现用文件的间隔(以秒为单位)" #: src/lang.c:3253 msgid "# Time interval in seconds between rereading the active file (0=never)\n" msgstr "# 重新读取现用文件的时间间隔秒数 (0=永不)\n" #: src/lang.c:3258 msgid "Reconnect to server automatically" msgstr "自动重新连接到服务器" #: src/lang.c:3259 msgid "# If ON automatically reconnect to NNTP server if the connection is broken\n" msgstr "# 如果打开就于连接中断时自动重新连接到 NNTP 服务器\n" #: src/lang.c:3263 msgid "Create local copies of NNTP overview files. toggles & sets." msgstr "创建 NNTP 概述文件的本地复本。 切换 & 设置。" #: src/lang.c:3264 msgid "Cache NNTP overview files locally" msgstr "产生 NNTP 概述文件的本地缓存" #: src/lang.c:3265 msgid "# If ON, create local copies of NNTP overview files.\n" msgstr "# 如果打开就创建 NNTP 概述文件的本地复本。\n" #: src/lang.c:3270 #, fuzzy #| msgid "Create local copies of NNTP overview files. toggles & sets." msgid "Compress local copies of NNTP overview files. toggles & sets." msgstr "创建 NNTP 概述文件的本地复本。 切换 & 设置。" #: src/lang.c:3271 #, fuzzy #| msgid "Cache NNTP overview files locally" msgid "Compress locally cached NNTP overview files" msgstr "产生 NNTP 概述文件的本地缓存" #: src/lang.c:3272 #, fuzzy #| msgid "# If ON, create local copies of NNTP overview files.\n" msgid "# If ON, compress local copies of NNTP overview files.\n" msgstr "# 如果打开就创建 NNTP 概述文件的本地复本。\n" #: src/lang.c:3277 src/lang.c:3292 src/lang.c:3312 src/lang.c:3335 #: src/lang.c:3360 src/lang.c:3382 src/lang.c:3401 msgid "Enter format string. sets, cancels." msgstr "输入格式字串。 设置， 取消。" #: src/lang.c:3278 msgid "Format string for selection level" msgstr "用于选择层级表示的格式字串" #: src/lang.c:3279 msgid "" "# Format string for selection level representation\n" "# Default: %f %n %U %G %d\n" "# Possible values are:\n" "# %% '%'\n" "# %d Description\n" "# %f Newsgroup flag: 'D' bogus, 'X' not postable,\n" "# 'M' moderated, '=' renamed, 'N' new, 'u' unsubscribed\n" "# %G Group name\n" "# %n Number, linenumber on screen\n" "# %U Unread count\n" msgstr "" "# 用于选择层级表示的格式字串\n" "# 默认值: %f %n %U %G %d\n" "# 可能值:\n" "# %% '%'\n" "# %d 描述\n" "# %f 新闻组旗标: 'D' 虚假 (bogus), 'X' 不可张贴,\n" "# 'M' moderated, '=' 已重命名, 'N' 新增, 'u' 未订阅\n" "# %G 组名\n" "# %n 数字，屏幕上的行数\n" "# %U 未读数\n" #: src/lang.c:3293 msgid "Format string for group level" msgstr "用于组层级表示的格式字串" #: src/lang.c:3294 msgid "" "# Format string for group level representation\n" "# Default: %n %m %R %L %s %F\n" "# Possible values are:\n" "# %% '%'\n" "# %D Date, like date_format\n" "# %(formatstr)D Date, formatstr gets passed to my_strftime()\n" "# %F From, name and/or address according to show_author\n" "# %I Initials\n" "# %L Line count\n" "# %M Message-ID\n" "# %m Article marks\n" "# %n Number, linenumber on screen\n" "# %R Count, number of responses in thread\n" "# %s Subject (only group level)\n" "# %S Score\n" msgstr "" "# 用于组层级表示的格式字串\n" "# 默认值: %n %m %R %L %s %F\n" "# 可能值:\n" "# %% '%'\n" "# %D 日期, 就像 date_format\n" "# %(formatstr)D 日期, formatstr 会被送进 my_strftime()\n" "# %F 来源, 名字和/或地址，按照 show_author\n" "# %I 首字母\n" "# %L 行数\n" "# %M 消息-ID\n" "# %m 文章标记\n" "# %n 数字，屏幕上的行号\n" "# %R 计数，帖子的回复数\n" "# %s 主题（仅组级）\n" "# %S 分数\n" #: src/lang.c:3313 #, fuzzy #| msgid "Format string for thread level" msgid "Format string for attachment level" msgstr "用于帖子层级的格式字串" #: src/lang.c:3314 #, fuzzy #| msgid "" #| "# Format string for group level representation\n" #| "# Default: %n %m %R %L %s %F\n" #| "# Possible values are:\n" #| "# %% '%'\n" #| "# %D Date, like date_format\n" #| "# %(formatstr)D Date, formatstr gets passed to my_strftime()\n" #| "# %F From, name and/or address according to show_author\n" #| "# %I Initials\n" #| "# %L Line count\n" #| "# %M Message-ID\n" #| "# %m Article marks\n" #| "# %n Number, linenumber on screen\n" #| "# %R Count, number of responses in thread\n" #| "# %s Subject (only group level)\n" #| "# %S Score\n" msgid "" "# Format string for attachment level representation\n" "# Default: %t%s%e%c%d\n" "# Possible values are:\n" "# %% '%'\n" "# %C Charset\n" "# %c Like %C but with description\n" "# %D Line count\n" "# %d Like %D but with description\n" "# %E Content encoding\n" "# %e Like %E but with description\n" "# %L Language\n" "# %l Like %L but with description\n" "# %S Content subtype\n" "# %s Like %S but with description\n" "# %T Content type\n" "# %t Like %T but with description\n" "# %Z Size in bytes\n" "# %z Like %Z but with description\n" msgstr "" "# 用于组层级表示的格式字串\n" "# 默认值: %n %m %R %L %s %F\n" "# 可能值:\n" "# %% '%'\n" "# %D 日期, 就像 date_format\n" "# %(formatstr)D 日期, formatstr 会被送进 my_strftime()\n" "# %F 来源, 名字和/或地址，按照 show_author\n" "# %I 首字母\n" "# %L 行数\n" "# %M 消息-ID\n" "# %m 文章标记\n" "# %n 数字，屏幕上的行号\n" "# %R 计数，帖子的回复数\n" "# %s 主题（仅组级）\n" "# %S 分数\n" #: src/lang.c:3336 #, fuzzy #| msgid "Format string for display of dates" msgid "Format string for display of mime header" msgstr "用于显示日期的格式字串" #: src/lang.c:3337 msgid "" "# Format string for mime header at article level\n" "# Default: [-- %T%S%*n%z%*l%!c%!d%*e --]\n" "# Possible values are:\n" "# %% '%'\n" "# %C Charset\n" "# %c Like %C but with description\n" "# %D Line count\n" "# %d Like %D but with description\n" "# %E Content encoding\n" "# %e Like %E but with description\n" "# %L Language\n" "# %l Like %L but with description\n" "# %N Name\n" "# %n Like %N but with description\n" "# %S Content subtype\n" "# %s Like %S but with description\n" "# %T Content type\n" "# %t Like %T but with description\n" "# %Z Size in bytes\n" "# %z Like %Z but with description\n" msgstr "" #: src/lang.c:3361 #, fuzzy #| msgid "Format string for display of dates" msgid "Format string for display of uue header" msgstr "用于显示日期的格式字串" #: src/lang.c:3362 msgid "" "# Format string for uue header at article level\n" "# Default: [-- %T%S%*n%I%!d%*e --]\n" "# Possible values are:\n" "# %% '%'\n" "# %D Line count\n" "# %d Like %D but with description\n" "# %E Content encoding\n" "# %e Like %E but with description\n" "# %I Complete/incomplete UUE part indicator\n" "# %N Name\n" "# %n Like %N but with description\n" "# %S Content subtype\n" "# %s Like %S but with description\n" "# %T Content type\n" "# %t Like %T but with description\n" "# %Z Size in bytes\n" "# %z Like %Z but with description\n" msgstr "" #: src/lang.c:3383 msgid "Format string for thread level" msgstr "用于帖子层级的格式字串" #: src/lang.c:3384 msgid "" "# Format string for thread level representation\n" "# Default: %n %m [%L] %T %F\n" "# Possible values are:\n" "# %% '%'\n" "# %D Date, like date_format\n" "# %(formatstr)D Date, formatstr gets passed to my_strftime()\n" "# %F From, name and/or address according to show_author\n" "# %I Initials\n" "# %L Line count\n" "# %M Message-ID\n" "# %m Article marks\n" "# %n Number, linenumber on screen\n" "# %S Score\n" "# %T Thread tree (only thread level)\n" msgstr "" "# 用于帖子层级表示的格式字串\n" "# 默认值: %n %m [%L] %T %F\n" "# 可能值:\n" "# %% '%'\n" "# %D 日期, 就像 date_format\n" "# %(formatstr)D 日期, formatstr 会被送进 my_strftime()\n" "# %F 来源, 名字和/或地址，按照 show_author\n" "# %I 首字母\n" "# %L 行数\n" "# %M 消息-ID\n" "# %m 文章标记\n" "# %n 数字，屏幕上的行号\n" "# %R 计数，帖子的回复数\n" "# %S 分数\n" "# %T 帖子树（仅帖级）\n" "\n" #: src/lang.c:3402 msgid "Format string for display of dates" msgstr "用于显示日期的格式字串" #: src/lang.c:3403 msgid "# Format string for date representation\n" msgstr "# 用于日期表示的格式字串\n" #: src/lang.c:3413 msgid "Unicode normalization form" msgstr "万国码范式形式" #: src/lang.c:3414 #, fuzzy #| msgid "" #| "# Unicode normalization form\n" #| "# Possible values are:\n" #| "# 0 = None\n" #| "# 1 = NFKC\n" #| "# 2 = NFKD\n" #| "# 3 = NFC\n" #| "# 4 = NFD\n" msgid "" "# Unicode normalization form\n" "# Possible values are:\n" "# 0 = None\n" "# 1 = NFKC\n" "# 2 = NFKD\n" "# 3 = NFC\n" "# 4 = NFD\n" "# 5 = NFKC_CF\n" msgstr "" "# 万国码范式形式\n" "# 可能的值为：\n" "# 0 = 无\n" "# 1 = NFKC\n" "# 2 = NFKD\n" "# 3 = NFC\n" "# 4 = NFD\n" #: src/lang.c:3428 msgid "Render BiDi" msgstr "呈现双向文本" #: src/lang.c:3429 msgid "# If ON, bi-directional text is rendered by tin\n" msgstr "# 如果打开就由 tin 呈现双向文本\n" #: src/lang.c:3436 msgid "Function for sorting articles" msgstr "用于排序文章的函数" #: src/lang.c:3437 msgid "" "# Function for sorting articles\n" "# Possible values are (the default is marked with *):\n" "# * 0 = qsort\n" "# 1 = heapsort\n" msgstr "" "# 用于排序文章的函数\n" "# 可能的值为 (默认值以 * 标记)：\n" "# * 0 = 快速排序\n" "# 1 = 堆积排序\n" #: src/lang.c:3450 msgid "Automatically GroupMarkUnselArtRead" msgstr "自动 GroupMarkUnselArtRead" #: src/lang.c:3456 msgid "Delete post-process files" msgstr "删除后续处理文件" #: src/lang.c:3461 msgid "Filename for all mailed articles, sets, no filename=do not save." msgstr "用于所有已邮寄文章的文件名， 设置，没有文件名=不保存。" #: src/lang.c:3462 msgid "Mailbox to save sent mails" msgstr "要保存已发送邮件的信箱" #: src/lang.c:3467 msgid "Set Followup-To: header to this group(s). sets, cancels." msgstr "设置 Followup-To: 标头为这个群组。 设置， 取消。" #: src/lang.c:3468 msgid "Followup-To: header" msgstr "Followup-To: 标头" #: src/lang.c:3473 msgid "Enter default mail address (and fullname). sets, cancels." msgstr "输入缺省邮件地址 (附全名)。 设置， 取消。" #: src/lang.c:3480 msgid "Path and options for ispell-like spell-checker. sets, cancels." msgstr "作为类似 ispell 拼写检查器的路径和选项。 设置， 取消。" #: src/lang.c:3481 msgid "Ispell program" msgstr "Ispell 程序" #: src/lang.c:3487 msgid "When group is a mailing list, send responses to this email address." msgstr "当群组是个邮递论坛时，发送回应到这个电子邮件地址。" #: src/lang.c:3488 msgid "Mailing list address" msgstr "邮递论坛地址" #: src/lang.c:3494 msgid "Forward articles as attachment" msgstr "作为附件以转发文章" #: src/lang.c:3499 msgid "A comma separated list of MIME major/minor Content-Types. cancels." msgstr "逗号分隔的 MIME 主要/次要内容类型清单。 取消。" #: src/lang.c:3500 msgid "Which MIME types will be saved" msgstr "将被保存的 MIME 类型" #: src/lang.c:3505 msgid "Value of the Organization: header. sets, cancels." msgstr "Organization: 标头的值。 设置， 取消。" #: src/lang.c:3506 msgid "Organization: header" msgstr "Organization: 标头" #: src/lang.c:3511 msgid "Filename for saved articles. sets, cancels." msgstr "用于已保存文章的文件名。 设置， 取消。" #: src/lang.c:3512 msgid "savefile" msgstr "保存文件" #: src/lang.c:3517 src/lang.c:3541 msgid "Scope for the filter rule. sets, cancels." msgstr "用于筛选器规则的范围。 设置， 取消。" #: src/lang.c:3518 msgid "Quick (1 key) select filter scope" msgstr "快速 (1 键) 选取筛选器范围" #: src/lang.c:3523 src/lang.c:3547 msgid "Header for filter rule. sets, cancels." msgstr "用于筛选器规则的标头。 设置， 取消。" #: src/lang.c:3524 msgid "Quick (1 key) select filter header" msgstr "快速 (1 键) 选取筛选器标头" #: src/lang.c:3529 src/lang.c:3553 msgid "ON = case sensitive, OFF = ignore case. sets, cancels." msgstr "ON = 大小写相符，OFF = 忽略大小写。 设置， 取消。" #: src/lang.c:3530 msgid "Quick (1 key) select filter case" msgstr "快速 (1 键) 选取筛选器大小写" #: src/lang.c:3535 src/lang.c:3559 msgid "ON = expire, OFF = don't ever expire. sets, cancels." msgstr "ON = 过期，OFF = 不会过期。 设置， 取消。" #: src/lang.c:3536 msgid "Quick (1 key) select filter expire" msgstr "快速 (1 键) 选取筛选器过期" #: src/lang.c:3542 msgid "Quick (1 key) kill filter scope" msgstr "快速 (1 键) 砍除筛选器范围" #: src/lang.c:3548 msgid "Quick (1 key) kill filter header" msgstr "快速 (1 键) 砍除筛选器标头" #: src/lang.c:3554 msgid "Quick (1 key) kill filter case" msgstr "快速 (1 键) 砍除筛选器大小写" #: src/lang.c:3560 msgid "Quick (1 key) kill filter expire" msgstr "快速 (1 键) 砍除筛选器过期" #: src/lang.c:3566 msgid "Assume this charset if no charset declaration is present, to set." msgstr "如果不存在任何字符集宣告就假设为这个字符集， 以设置。" #: src/lang.c:3567 msgid "UNDECLARED_CHARSET" msgstr "未宣告字符集" #: src/lang.c:3572 #, fuzzy #| msgid "Assume this charset if no charset declaration is present, to set." msgid "Guess charset if no charset declaration is present, to set." msgstr "如果不存在任何字符集宣告就假设为这个字符集， 以设置。" #: src/lang.c:3573 #, fuzzy #| msgid "UNDECLARED_CHARSET" msgid "UNDECLARED_CS_GUESS" msgstr "未宣告字符集" #: src/lang.c:3580 msgid "Add this text at the start of the message body. sets, cancels." msgstr "加入这个文本于消息内文的开始。 设置， 取消。" #: src/lang.c:3581 msgid "X_Body" msgstr "X_Body" #: src/lang.c:3586 msgid "Insert this header when posting. sets, cancels." msgstr "张贴时插入这个标头。 设置， 取消。" #: src/lang.c:3587 msgid "X_Headers" msgstr "X_Headers" #: src/lang.c:3592 msgid "Automatically insert an X-Comment-To: header? toggles & sets." msgstr "自动插入 X-Comment-To: 标头？ 切换 & 设置。" #: src/lang.c:3593 msgid "Insert 'X-Comment-To:' header" msgstr "插入‘X-Comment-To:’标头" #: src/lang.c:3599 #, fuzzy #| msgid "Enter number of days article is considered recent. sets." msgid "Enter name of file containing trusted CA certificates. sets." msgstr "输入被认为最近文章的日数。 设置。" #: src/lang.c:3600 #, fuzzy #| msgid "edit filter file" msgid "CA certificate file" msgstr "编辑筛选器文件" #: src/lang.c:3601 msgid "# name of file containing all trusted CA certificates (empty = system default)\n" msgstr "" #: src/nntplib.c:963 #, c-format msgid "" "\n" "Server timed out, trying reconnect # %d\n" msgstr "" "\n" "服务器已超时，尝试重新连接 # %d\n" #: src/nntplib.c:1006 src/nntplib.c:2115 msgid "Rejoin current group\n" msgstr "重新链接目前的群组\n" #: src/nntplib.c:1015 src/nntplib.c:2124 #, c-format msgid "Read (%s)\n" msgstr "已读 (%s)\n" #: src/nntplib.c:1017 #, c-format msgid "Resend last command (%s)\n" msgstr "重新发送最近的命令 (%s)\n" #: src/read.c:358 msgid "Aborted read\n" msgstr "已放弃读取\n" #: src/read.c:413 msgid "Draining\n" msgstr "排放\n" #: src/refs.c:654 msgid "[- Unavailable -]" msgstr "[- 不可用 -]" #, c-format #~ msgid "# auto_save=ON/OFF\n" #~ msgstr "# auto_save=ON/OFF\n" #, c-format #~ msgid "# start_editor_offset=ON/OFF\n" #~ msgstr "# start_editor_offset=ON/OFF\n" #~ msgid "all " #~ msgstr "所有 " #, c-format #~ msgid "%*s[-- %s/%s, encoding %s%s%s, %d lines%s%s --]\n" #~ msgstr "%*s[-- %s/%s，编码 %s%s%s，%d 行%s%s --]\n" #, c-format #~ msgid "Active file corrupt - %s" #~ msgstr "现用文件损坏 - %s" #, c-format #~ msgid "Connecting to %s..." #~ msgstr "连接到 %s…" #~ msgid "" #~ "\n" #~ "Error: Bad address in Approved: header.\n" #~ msgstr "" #~ "\n" #~ "错误：不当的地址于 Approved: 标头。\n" #~ msgid "" #~ "\n" #~ "Error: Bad address in From: header.\n" #~ msgstr "" #~ "\n" #~ "错误：不当的地址于 From: 标头。\n" #~ msgid "" #~ "\n" #~ "Error: Bad address in Reply-To: header.\n" #~ msgstr "" #~ "\n" #~ "错误：不当的地址于 Reply-To: 标头。\n" #, c-format #~ msgid "Invalid response to GROUP command, %s" #~ msgstr "对于 GROUP 命令的无效回应，%s" #, c-format #~ msgid "Invalid From: %s line. Read the INSTALL file again." #~ msgstr "无效的 From: %s 行。请再阅读 INSTALL 文件。" #~ msgid "threads" #~ msgstr "讨论串" #~ msgid " h=help" #~ msgstr " h=求助" #, c-format #~ msgid "" #~ "%*s[-- %s/%s, %suuencoded file, %d lines, name: %s --]\n" #~ "\n" #~ msgstr "" #~ "%*s[-- %s/%s，%suuencoded 文件，%d 行，名称：%s --]\n" #~ "\n" #, c-format #~ msgid "unparseable \"LIST COUNTS\" line: \"%s\"" #~ msgstr "无法解析的“清单计数”行：“%s”" #, c-format #~ msgid "\tChecksum of %s (%ld %s)" #~ msgstr "\t%s 的总和检查码 (%ld %s)" #, c-format #~ msgid "Wrong newsgroup name (\"%s\") in response of \"GROUP %s\" command: \"%s\"" #~ msgstr "错误新闻群组名称 (“%s”) 于“群组 %s”命令：“%s”的回应之中" #~ msgid "no" #~ msgstr "无" #~ msgid "Enter maximum length of newsgroup names displayed. sets." #~ msgstr "输入显示新闻群组名称的最大长度。 设置。" #~ msgid "Max. length of group names shown" #~ msgstr "显示群组名称的最大长度" #~ msgid "# Maximum length of the names of newsgroups displayed\n" #~ msgstr "# 显示新闻群组名称的最大长度\n" #~ msgid "# What should we ask confirmation for.\n" #~ msgstr "# 我们应该对于什么询问确认。\n" #~ msgid "Auto save article/thread by Archive-name: header. toggles & sets." #~ msgstr "依 Archive-name: 标头来自动保存文章/讨论串。 切换 & 设置。" #~ msgid "Use Archive-name: header for save" #~ msgstr "保存使用 Archive-name: 标头" #~ msgid "" #~ "# If ON articles/threads with Archive-name: in mail header will\n" #~ "# be automatically saved with the Archive-name & part/patch no.\n" #~ msgstr "" #~ "# 如果打开就将在邮件标头中具有 Archive-name: 的文章/讨论串\n" #~ "# 以存盘名称 & 部分/修补程序号码自动保存\n" #~ msgid "Start editor with line offset. toggles, sets, cancels." #~ msgstr "启始编辑器以及行偏移。 切换， 设置， 取消。" #~ msgid "Start editor with line offset" #~ msgstr "启始编辑器以及行偏移" #~ msgid "" #~ "# If ON editor will be started with cursor offset into the file\n" #~ "# otherwise the cursor will be positioned at the first line\n" #~ msgstr "" #~ "# 如果打开就启始编辑器以及进入文件后的光标偏移\n" #~ "# 否则光标将被定位于第一行\n" #, c-format #~ msgid "Version: %s %s release %s (\"%s\") %s %s\n" #~ msgstr "版本：%s %s 发布 %s (“%s”) %s %s\n" #~ msgid "bytes" #~ msgstr "字节" #~ msgid "# show_info=NUM\n" #~ msgstr "# show_info=数字\n" #~ msgid "Lines" #~ msgstr "行数" #~ msgid "Lines & Score" #~ msgstr "行数 & 分数" #~ msgid "Show lines/score in listings" #~ msgstr "在列表中显示行数/分数" #~ msgid "" #~ "# What information should be displayed in article/thread listing\n" #~ "# Possible values are (the default is marked with *):\n" #~ "# 0 = nothing\n" #~ "# * 1 = lines\n" #~ "# 2 = score\n" #~ "# 3 = lines & score\n" #~ msgstr "" #~ "# 哪些信息应该被显示在文章/讨论串列表中\n" #~ "# 可能的值包括 (默认值以 * 标记)：\n" #~ "# 0 = 没有任何东西\n" #~ "# * 1 = 行数\n" #~ "# 2 = 分数\n" #~ "# 3 = 行数 & 分数\n"