# Chinese translations for xz package
# xz 软件包的简体中文翻译。
# This file is put in the public domain.
# Boyuan Yang <073plan@gmail.com>, 2019, 2022.
#
msgid ""
msgstr ""
"Project-Id-Version: xz 5.4.0-pre1\n"
"Report-Msgid-Bugs-To: xz@tukaani.org\n"
"POT-Creation-Date: 2022-12-01 21:23+0200\n"
"PO-Revision-Date: 2022-11-30 13:31-0500\n"
"Last-Translator: Boyuan Yang <073plan@gmail.com>\n"
"Language-Team: Chinese (simplified) <i18n-zh@googlegroups.com>\n"
"Language: zh_CN\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=1; plural=0;\n"
"X-Bugs: Report translation errors to the Language-Team address.\n"
"X-Generator: Poedit 3.2\n"

#: src/xz/args.c:64
#, c-format
msgid "%s: Invalid argument to --block-list"
msgstr "%s：--block-list 的无效参数"

#: src/xz/args.c:74
#, c-format
msgid "%s: Too many arguments to --block-list"
msgstr "%s：--block-list 得到过多参数"

#: src/xz/args.c:103
msgid "0 can only be used as the last element in --block-list"
msgstr "0 仅可用于 --block-list 的最后一个元素"

#: src/xz/args.c:436
#, c-format
msgid "%s: Unknown file format type"
msgstr "%s：位置文件格式类型"

#: src/xz/args.c:459 src/xz/args.c:467
#, c-format
msgid "%s: Unsupported integrity check type"
msgstr "%s：不支持的完整性检查类型"

#: src/xz/args.c:503
msgid "Only one file can be specified with `--files' or `--files0'."
msgstr "仅可使用“--files”或“--files0”指定一个文件。"

#: src/xz/args.c:571
#, c-format
msgid "The environment variable %s contains too many arguments"
msgstr "环境变量 %s 包含过多参数"

#: src/xz/args.c:673
msgid "Compression support was disabled at build time"
msgstr "压缩支持已在构建时禁用"

#: src/xz/args.c:680
msgid "Decompression support was disabled at build time"
msgstr "解压支持已在构建时禁用"

#: src/xz/args.c:686
msgid "Compression of lzip files (.lz) is not supported"
msgstr "不支持对 lzip 文件 (.lz) 的压缩"

#: src/xz/coder.c:115
msgid "Maximum number of filters is four"
msgstr "过滤器最多数量为四"

#: src/xz/coder.c:134
msgid "Memory usage limit is too low for the given filter setup."
msgstr "内存用量限制对指定过滤器设置过低。"

#: src/xz/coder.c:169
msgid "Using a preset in raw mode is discouraged."
msgstr "不推荐在 raw 模式使用预设等级。"

#: src/xz/coder.c:171
msgid "The exact options of the presets may vary between software versions."
msgstr "各个预设等级所使用的准确选项列表在不同软件版本之间可能不同。"

#: src/xz/coder.c:194
msgid "The .lzma format supports only the LZMA1 filter"
msgstr ".lzma 格式只支持 LZMA1 过滤器"

#: src/xz/coder.c:202
msgid "LZMA1 cannot be used with the .xz format"
msgstr "LZMA1 无法用于 .xz 格式"

#: src/xz/coder.c:219
msgid "The filter chain is incompatible with --flush-timeout"
msgstr "过滤器链和 --flush-timeout 不兼容"

#: src/xz/coder.c:225
msgid "Switching to single-threaded mode due to --flush-timeout"
msgstr "因 --flush-timeout 而切换至单线程模式"

#: src/xz/coder.c:249
#, c-format
msgid "Using up to %<PRIu32> threads."
msgstr "使用最多 %<PRIu32> 个线程。"

#: src/xz/coder.c:265
msgid "Unsupported filter chain or filter options"
msgstr "不支持的过滤器链或过滤器选项"

#: src/xz/coder.c:277
#, c-format
msgid "Decompression will need %s MiB of memory."
msgstr "解压缩需要 %s MiB 的内存。"

#: src/xz/coder.c:309
#, c-format
msgid "Reduced the number of threads from %s to %s to not exceed the memory usage limit of %s MiB"
msgstr "已将所使用的线程数从 %s 减小为 %s，以不超出 %s MiB 的内存用量限制"

#: src/xz/coder.c:329
#, c-format
msgid "Reduced the number of threads from %s to one. The automatic memory usage limit of %s MiB is still being exceeded. %s MiB of memory is required. Continuing anyway."
msgstr "已将所使用的线程数从 %s 减小为 1。这仍然超出了自动的内存使用限制 %s MiB。需要 %s MiB 的内存。继续操作。"

#: src/xz/coder.c:356
#, c-format
msgid "Switching to single-threaded mode to not exceed the memory usage limit of %s MiB"
msgstr "正在切换到单线程模式以不超出 %s MiB 的内存用量限制"

#: src/xz/coder.c:411
#, c-format
msgid "Adjusted LZMA%c dictionary size from %s MiB to %s MiB to not exceed the memory usage limit of %s MiB"
msgstr "已调整 LZMA%c 字典大小（从 %s MiB 调整为 %s MiB），以不超出 %s MiB 的内存用量限制"

#: src/xz/file_io.c:110 src/xz/file_io.c:118
#, c-format
msgid "Error creating a pipe: %s"
msgstr "创建管道时出错：%s"

#: src/xz/file_io.c:235
msgid "Failed to enable the sandbox"
msgstr "沙盒启用失败"

#: src/xz/file_io.c:277
#, c-format
msgid "%s: poll() failed: %s"
msgstr "%s：poll() 失败：%s"

#. TRANSLATORS: When compression or decompression finishes,
#. and xz is going to remove the source file, xz first checks
#. if the source file still exists, and if it does, does its
#. device and inode numbers match what xz saw when it opened
#. the source file. If these checks fail, this message is
#. shown, %s being the filename, and the file is not deleted.
#. The check for device and inode numbers is there, because
#. it is possible that the user has put a new file in place
#. of the original file, and in that case it obviously
#. shouldn't be removed.
#: src/xz/file_io.c:344
#, c-format
msgid "%s: File seems to have been moved, not removing"
msgstr "%s：文件似乎已移动，不再进行删除操作"

#: src/xz/file_io.c:351 src/xz/file_io.c:907
#, c-format
msgid "%s: Cannot remove: %s"
msgstr "%s：无法删除：%s"

#: src/xz/file_io.c:377
#, c-format
msgid "%s: Cannot set the file owner: %s"
msgstr "%s：无法设置文件所有者：%s"

#: src/xz/file_io.c:390
#, c-format
msgid "%s: Cannot set the file group: %s"
msgstr "%s：无法设置文件所有组：%s"

#: src/xz/file_io.c:409
#, c-format
msgid "%s: Cannot set the file permissions: %s"
msgstr "%s：无法设置文件权限：%s"

#: src/xz/file_io.c:535
#, c-format
msgid "Error getting the file status flags from standard input: %s"
msgstr "从标准输入获取文件状态标志出错：%s"

#: src/xz/file_io.c:593 src/xz/file_io.c:655
#, c-format
msgid "%s: Is a symbolic link, skipping"
msgstr "%s：是符号链接，跳过"

#: src/xz/file_io.c:684
#, c-format
msgid "%s: Is a directory, skipping"
msgstr "%s：是目录，跳过"

#: src/xz/file_io.c:690
#, c-format
msgid "%s: Not a regular file, skipping"
msgstr "%s：不是标准文件，跳过"

#: src/xz/file_io.c:707
#, c-format
msgid "%s: File has setuid or setgid bit set, skipping"
msgstr "%s：文件有设置用户ID或设置组ID标识，跳过"

#: src/xz/file_io.c:714
#, c-format
msgid "%s: File has sticky bit set, skipping"
msgstr "%s：文件有粘滞位标识，跳过"

#: src/xz/file_io.c:721
#, c-format
msgid "%s: Input file has more than one hard link, skipping"
msgstr "%s：输入文件有多于一个硬链接，跳过"

#: src/xz/file_io.c:763
msgid "Empty filename, skipping"
msgstr "空文件名，跳过"

#: src/xz/file_io.c:817
#, c-format
msgid "Error restoring the status flags to standard input: %s"
msgstr "回复标准输入的状态标志时出错：%s"

#: src/xz/file_io.c:865
#, c-format
msgid "Error getting the file status flags from standard output: %s"
msgstr "获取标准输出的文件状态标志时出错：%s"

#: src/xz/file_io.c:1043
#, c-format
msgid "Error restoring the O_APPEND flag to standard output: %s"
msgstr "恢复标准输出的 O_APPEND 标志时出错：%s"

#: src/xz/file_io.c:1055
#, c-format
msgid "%s: Closing the file failed: %s"
msgstr "%s：关闭文件失败：%s"

#: src/xz/file_io.c:1091 src/xz/file_io.c:1354
#, c-format
msgid "%s: Seeking failed when trying to create a sparse file: %s"
msgstr "%s：尝试创建稀疏文件时 seek 失败：%s"

#: src/xz/file_io.c:1192
#, c-format
msgid "%s: Read error: %s"
msgstr "%s：读取错误：%s"

#: src/xz/file_io.c:1222
#, c-format
msgid "%s: Error seeking the file: %s"
msgstr "%s：seek 文件时出错：%s"

#: src/xz/file_io.c:1246
#, c-format
msgid "%s: Unexpected end of file"
msgstr "%s：未预期的文件结束"

#: src/xz/file_io.c:1305
#, c-format
msgid "%s: Write error: %s"
msgstr "%s：写入错误：%s"

#: src/xz/hardware.c:238
msgid "Disabled"
msgstr "已禁用"

#: src/xz/hardware.c:269
msgid "Amount of physical memory (RAM):"
msgstr "物理内存（RAM）用量："

#: src/xz/hardware.c:270
msgid "Number of processor threads:"
msgstr "处理器线程数："

#: src/xz/hardware.c:271
msgid "Compression:"
msgstr "压缩："

#: src/xz/hardware.c:272
msgid "Decompression:"
msgstr "解压缩："

#: src/xz/hardware.c:273
msgid "Multi-threaded decompression:"
msgstr "多线程解压缩："

#: src/xz/hardware.c:274
msgid "Default for -T0:"
msgstr "-T0 的默认值："

#: src/xz/hardware.c:292
msgid "Hardware information:"
msgstr "硬件信息："

#: src/xz/hardware.c:299
msgid "Memory usage limits:"
msgstr "内存使用限制："

#: src/xz/list.c:68
msgid "Streams:"
msgstr "流："

#: src/xz/list.c:69
msgid "Blocks:"
msgstr "块："

#: src/xz/list.c:70
msgid "Compressed size:"
msgstr "压缩后大小："

#: src/xz/list.c:71
msgid "Uncompressed size:"
msgstr "解压缩大小："

#: src/xz/list.c:72
msgid "Ratio:"
msgstr "比例："

#: src/xz/list.c:73
msgid "Check:"
msgstr "校验："

#: src/xz/list.c:74
msgid "Stream Padding:"
msgstr "流填充大小："

#: src/xz/list.c:75
msgid "Memory needed:"
msgstr "所需内存："

#: src/xz/list.c:76
msgid "Sizes in headers:"
msgstr "头部存放大小："

#: src/xz/list.c:79
msgid "Number of files:"
msgstr "文件数量："

#: src/xz/list.c:122
msgid "Stream"
msgstr "流"

#: src/xz/list.c:123
msgid "Block"
msgstr "块"

#: src/xz/list.c:124
msgid "Blocks"
msgstr "块"

#: src/xz/list.c:125
msgid "CompOffset"
msgstr "压缩偏移量"

#: src/xz/list.c:126
msgid "UncompOffset"
msgstr "解压偏移量"

#: src/xz/list.c:127
msgid "CompSize"
msgstr "压缩后大小"

#: src/xz/list.c:128
msgid "UncompSize"
msgstr "解压缩大小"

#: src/xz/list.c:129
msgid "TotalSize"
msgstr "总大小"

#: src/xz/list.c:130
msgid "Ratio"
msgstr "比例"

#: src/xz/list.c:131
msgid "Check"
msgstr "校验"

#: src/xz/list.c:132
msgid "CheckVal"
msgstr "校验值"

#: src/xz/list.c:133
msgid "Padding"
msgstr "填充"

#: src/xz/list.c:134
msgid "Header"
msgstr "头部"

#: src/xz/list.c:135
msgid "Flags"
msgstr "标志"

#: src/xz/list.c:136
msgid "MemUsage"
msgstr "内存用量"

#: src/xz/list.c:137
msgid "Filters"
msgstr "过滤器"

#. TRANSLATORS: Indicates that there is no integrity check.
#. This string is used in tables. In older xz version this
#. string was limited to ten columns in a fixed-width font, but
#. nowadays there is no strict length restriction anymore.
#: src/xz/list.c:169
msgid "None"
msgstr "无"

#. TRANSLATORS: Indicates that integrity check name is not known,
#. but the Check ID is known (here 2). In older xz version these
#. strings were limited to ten columns in a fixed-width font, but
#. nowadays there is no strict length restriction anymore.
#: src/xz/list.c:175
msgid "Unknown-2"
msgstr "未知-2"

#: src/xz/list.c:176
msgid "Unknown-3"
msgstr "未知-3"

#: src/xz/list.c:178
msgid "Unknown-5"
msgstr "未知-5"

#: src/xz/list.c:179
msgid "Unknown-6"
msgstr "未知-6"

#: src/xz/list.c:180
msgid "Unknown-7"
msgstr "未知-7"

#: src/xz/list.c:181
msgid "Unknown-8"
msgstr "未知-8"

#: src/xz/list.c:182
msgid "Unknown-9"
msgstr "未知-9"

#: src/xz/list.c:184
msgid "Unknown-11"
msgstr "未知-11"

#: src/xz/list.c:185
msgid "Unknown-12"
msgstr "未知-12"

#: src/xz/list.c:186
msgid "Unknown-13"
msgstr "未知-13"

#: src/xz/list.c:187
msgid "Unknown-14"
msgstr "未知-14"

#: src/xz/list.c:188
msgid "Unknown-15"
msgstr "未知-15"

#: src/xz/list.c:351
#, c-format
msgid "%s: File is empty"
msgstr "%s：文件为空"

#: src/xz/list.c:356
#, c-format
msgid "%s: Too small to be a valid .xz file"
msgstr "%s：过小而不是有效的 .xz 文件"

#. TRANSLATORS: These are column headings. From Strms (Streams)
#. to Ratio, the columns are right aligned. Check and Filename
#. are left aligned. If you need longer words, it's OK to
#. use two lines here. Test with "xz -l foo.xz".
#: src/xz/list.c:730
msgid "Strms  Blocks   Compressed Uncompressed  Ratio  Check   Filename"
msgstr "   流      块     压缩大小     解压大小   比例  校验    文件名"

#: src/xz/list.c:1025 src/xz/list.c:1203
msgid "Yes"
msgstr "是"

#: src/xz/list.c:1025 src/xz/list.c:1203
msgid "No"
msgstr "否"

#: src/xz/list.c:1027 src/xz/list.c:1205
#, c-format
msgid "  Minimum XZ Utils version: %s\n"
msgstr "  最低 XZ Utils 版本：%s\n"

#. TRANSLATORS: %s is an integer. Only the plural form of this
#. message is used (e.g. "2 files"). Test with "xz -l foo.xz bar.xz".
#: src/xz/list.c:1178
#, c-format
msgid "%s file\n"
msgid_plural "%s files\n"
msgstr[0] "%s 文件\n"

#: src/xz/list.c:1191
msgid "Totals:"
msgstr "总计："

#: src/xz/list.c:1269
msgid "--list works only on .xz files (--format=xz or --format=auto)"
msgstr "--list 仅适用于 .xz 文件（--format=xz 或 --format=auto）"

#: src/xz/list.c:1275
msgid "--list does not support reading from standard input"
msgstr "--list 不支持从标准输入读取"

#: src/xz/main.c:89
#, c-format
msgid "%s: Error reading filenames: %s"
msgstr "%s：读取文件名列表时出错：%s"

#: src/xz/main.c:96
#, c-format
msgid "%s: Unexpected end of input when reading filenames"
msgstr "%s：读取文件名列表时遇到未预期的输入结束"

#: src/xz/main.c:120
#, c-format
msgid "%s: Null character found when reading filenames; maybe you meant to use `--files0' instead of `--files'?"
msgstr "%s：读取文件名列表时获得了空字符；您可能想要使用“--files0”而非“--files”？"

#: src/xz/main.c:188
msgid "Compression and decompression with --robot are not supported yet."
msgstr "尚不支持带 --robot 的压缩和解压缩。"

#: src/xz/main.c:266
msgid "Cannot read data from standard input when reading filenames from standard input"
msgstr "无法同时从标准输入读取数据和文件名列表"

#. TRANSLATORS: This is the program name in the beginning
#. of the line in messages. Usually it becomes "xz: ".
#. This is a translatable string because French needs
#. a space before a colon.
#: src/xz/message.c:725
#, c-format
msgid "%s: "
msgstr "%s："

#: src/xz/message.c:788 src/xz/message.c:847
msgid "Internal error (bug)"
msgstr "内部错误（bug）"

#: src/xz/message.c:795
msgid "Cannot establish signal handlers"
msgstr "无法建立信号处理器"

#: src/xz/message.c:804
msgid "No integrity check; not verifying file integrity"
msgstr "无完整性检查；将不验证文件完整性"

#: src/xz/message.c:807
msgid "Unsupported type of integrity check; not verifying file integrity"
msgstr "不支持的完整性检查类型；将不验证文件完整性"

#: src/xz/message.c:814
msgid "Memory usage limit reached"
msgstr "达到内存使用限制"

#: src/xz/message.c:817
msgid "File format not recognized"
msgstr "无法识别文件格式"

#: src/xz/message.c:820
msgid "Unsupported options"
msgstr "不支持的选项"

#: src/xz/message.c:823
msgid "Compressed data is corrupt"
msgstr "压缩数据已损坏"

#: src/xz/message.c:826
msgid "Unexpected end of input"
msgstr "输入意外结束"

#: src/xz/message.c:868
#, c-format
msgid "%s MiB of memory is required. The limiter is disabled."
msgstr "需要 %s MiB 的内存空间。限制已禁用。"

#: src/xz/message.c:896
#, c-format
msgid "%s MiB of memory is required. The limit is %s."
msgstr "需要 %s MiB 的内存空间。限制为 %s。"

#: src/xz/message.c:915
#, c-format
msgid "%s: Filter chain: %s\n"
msgstr "%s：过滤器链：%s\n"

#: src/xz/message.c:926
#, c-format
msgid "Try `%s --help' for more information."
msgstr "请尝试执行“%s --help”来获取更多信息。"

#: src/xz/message.c:952
#, c-format
msgid ""
"Usage: %s [OPTION]... [FILE]...\n"
"Compress or decompress FILEs in the .xz format.\n"
"\n"
msgstr ""
"用法：%s [选项]... [文件]...\n"
"使用 .xz 格式压缩或解压缩文件。\n"
"\n"

#: src/xz/message.c:959
msgid "Mandatory arguments to long options are mandatory for short options too.\n"
msgstr "必选参数对长短选项同时适用。\n"

#: src/xz/message.c:963
msgid " Operation mode:\n"
msgstr " 操作模式：\n"

#: src/xz/message.c:966
msgid ""
"  -z, --compress      force compression\n"
"  -d, --decompress    force decompression\n"
"  -t, --test          test compressed file integrity\n"
"  -l, --list          list information about .xz files"
msgstr ""
"  -z, --compress      强制压缩\n"
"  -d, --decompress    强制解压缩\n"
"  -t, --test          测试压缩文件完整性\n"
"  -l, --list          列出 .xz 文件的信息"

#: src/xz/message.c:972
msgid ""
"\n"
" Operation modifiers:\n"
msgstr ""
"\n"
" 操作修饰符：\n"

#: src/xz/message.c:975
msgid ""
"  -k, --keep          keep (don't delete) input files\n"
"  -f, --force         force overwrite of output file and (de)compress links\n"
"  -c, --stdout        write to standard output and don't delete input files"
msgstr ""
"  -k, --keep          保留（不要删除）输入文件\n"
"  -f, --force         强制覆写输出文件和（解）压缩链接\n"
"  -c, --stdout        向标准输出写入，同时不要删除输入文件"

#: src/xz/message.c:984
msgid ""
"      --single-stream decompress only the first stream, and silently\n"
"                      ignore possible remaining input data"
msgstr "      --single-stream 仅解压缩第一个流，忽略其后可能继续出现的输入数据"

#: src/xz/message.c:987
msgid ""
"      --no-sparse     do not create sparse files when decompressing\n"
"  -S, --suffix=.SUF   use the suffix `.SUF' on compressed files\n"
"      --files[=FILE]  read filenames to process from FILE; if FILE is\n"
"                      omitted, filenames are read from the standard input;\n"
"                      filenames must be terminated with the newline character\n"
"      --files0[=FILE] like --files but use the null character as terminator"
msgstr ""
"      --no-sparse     解压缩时不要创建稀疏文件\n"
"  -S, --suffix=.SUF   压缩文件使用指定的“.SUF”后缀名\n"
"      --files[=文件]  从指定文件读取要处理的文件名列表；如果省略了指定文件名，\n"
"                      将从标准输入读取文件名列表；文件名必须使用换行符分隔\n"
"      --files0[=文件] 类似 --files，但使用空字符进行分隔"

#: src/xz/message.c:996
msgid ""
"\n"
" Basic file format and compression options:\n"
msgstr ""
"\n"
" 基本文件格式和压缩选项：\n"

#: src/xz/message.c:998
msgid ""
"  -F, --format=FMT    file format to encode or decode; possible values are\n"
"                      `auto' (default), `xz', `lzma', `lzip', and `raw'\n"
"  -C, --check=CHECK   integrity check type: `none' (use with caution),\n"
"                      `crc32', `crc64' (default), or `sha256'"
msgstr ""
"  -F, --format=格式   要编码或解码的文件格式；可能的值包括\n"
"                      “auto”（默认）、“xz”、“lzma”、\n"
"                      “lzip”和“raw”\n"
"  -C, --check=类型    完整性检查类型：“none”（请谨慎使用）、\n"
"                      “crc32”、“crc64”（默认）或“sha256”"

#: src/xz/message.c:1003
msgid "      --ignore-check  don't verify the integrity check when decompressing"
msgstr "      --ignore-check  解压缩时不要进行完整性检查验证"

#: src/xz/message.c:1007
msgid ""
"  -0 ... -9           compression preset; default is 6; take compressor *and*\n"
"                      decompressor memory usage into account before using 7-9!"
msgstr ""
"  -0 ... -9           压缩预设等级；默认为 6；使用 7-9 的等级之前，请先考虑\n"
"                      压缩和解压缩所需的内存用量！（会占用大量内存空间）"

#: src/xz/message.c:1011
msgid ""
"  -e, --extreme       try to improve compression ratio by using more CPU time;\n"
"                      does not affect decompressor memory requirements"
msgstr ""
"  -e, --extreme       尝试使用更多 CPU 时间来改进压缩比率；\n"
"                      不会影响解压缩的内存需求量"

#: src/xz/message.c:1015
msgid ""
"  -T, --threads=NUM   use at most NUM threads; the default is 1; set to 0\n"
"                      to use as many threads as there are processor cores"
msgstr ""
"  -T, --threads=数量  使用最多指定数量的线程；默认值为 1；设置为 0\n"
"                      可以使用与处理器内核数量相同的线程数"

#: src/xz/message.c:1020
msgid ""
"      --block-size=SIZE\n"
"                      start a new .xz block after every SIZE bytes of input;\n"
"                      use this to set the block size for threaded compression"
msgstr ""
"      --block-size=块大小\n"
"                      输入每读取指定块大小的数据后即开始一个新的 .xz 块；\n"
"                      使用该选项可以设置多线程压缩中的块大小"

#: src/xz/message.c:1024
msgid ""
"      --block-list=SIZES\n"
"                      start a new .xz block after the given comma-separated\n"
"                      intervals of uncompressed data"
msgstr ""
"      --block-list=块大小列表\n"
"                      在所给出的未压缩数据间隔大小的数据之后开始一个新的\n"
"                      .xz 块（使用逗号分隔）"

#: src/xz/message.c:1028
msgid ""
"      --flush-timeout=TIMEOUT\n"
"                      when compressing, if more than TIMEOUT milliseconds has\n"
"                      passed since the previous flush and reading more input\n"
"                      would block, all pending data is flushed out"
msgstr ""
"      --flush-timeout=超时时间\n"
"                      进行压缩时，如果从上次刷洗输出之后经过了指定的超时时间\n"
"                      且读取更多数据会被阻塞，则刷洗输出所有缓冲数据"

#: src/xz/message.c:1034
#, no-c-format
msgid ""
"      --memlimit-compress=LIMIT\n"
"      --memlimit-decompress=LIMIT\n"
"      --memlimit-mt-decompress=LIMIT\n"
"  -M, --memlimit=LIMIT\n"
"                      set memory usage limit for compression, decompression,\n"
"                      threaded decompression, or all of these; LIMIT is in\n"
"                      bytes, % of RAM, or 0 for defaults"
msgstr ""
"      --memlimit-compress=限制用量\n"
"      --memlimit-decompress=限制用量\n"
"      --memlimit-mt-decompress=限制用量\n"
"  -M, --memlimit=限制用量\n"
"                      设置压缩、解压缩、多线程解压缩或者共同的内存用量限制；\n"
"                      所指定限制量单位为字节，或以百分号 % 结尾表示内存比例，\n"
"                      或者指定 0 取软件默认值"

#: src/xz/message.c:1043
msgid ""
"      --no-adjust     if compression settings exceed the memory usage limit,\n"
"                      give an error instead of adjusting the settings downwards"
msgstr "      --no-adjust     如果压缩设置超出内存用量限制，不调整设置而直接报错"

#: src/xz/message.c:1049
msgid ""
"\n"
" Custom filter chain for compression (alternative for using presets):"
msgstr ""
"\n"
" 用于压缩的自定义过滤器链（不使用预设等级时的备选用法）："

#: src/xz/message.c:1058
msgid ""
"\n"
"  --lzma1[=OPTS]      LZMA1 or LZMA2; OPTS is a comma-separated list of zero or\n"
"  --lzma2[=OPTS]      more of the following options (valid values; default):\n"
"                        preset=PRE reset options to a preset (0-9[e])\n"
"                        dict=NUM   dictionary size (4KiB - 1536MiB; 8MiB)\n"
"                        lc=NUM     number of literal context bits (0-4; 3)\n"
"                        lp=NUM     number of literal position bits (0-4; 0)\n"
"                        pb=NUM     number of position bits (0-4; 2)\n"
"                        mode=MODE  compression mode (fast, normal; normal)\n"
"                        nice=NUM   nice length of a match (2-273; 64)\n"
"                        mf=NAME    match finder (hc3, hc4, bt2, bt3, bt4; bt4)\n"
"                        depth=NUM  maximum search depth; 0=automatic (default)"
msgstr ""
"\n"
"  --lzma1[=选项]      LZMA1 或 LZMA2；指定选项是用逗号分隔的下列选项的组合，\n"
"  --lzma2[=选项]      值应当为零或大于零（有效值；默认值）：\n"
"                        preset=PRE 将选项重置为预设配置 (0-9[e])\n"
"                        dict=数字  字典大小 (4KiB - 1536MiB; 8MiB)\n"
"                        lc=数字    literal context 位的数量 (0-4; 3)\n"
"                        lp=数字    literal position 位的数量 (0-4; 0)\n"
"                        pb=数字    position 位的数量 (0-4; 2)\n"
"                        mode=模式  压缩模式 (fast, normal; normal)\n"
"                        nice=数字  匹配的 nice 值 (2-273; 64)\n"
"                        mf=名称    匹配搜索器 match finder\n"
"                                   (hc3, hc4, bt2, bt3, bt4; bt4)\n"
"                        depth=数字 最大搜索深度； 0=自动（默认）"

#: src/xz/message.c:1073
msgid ""
"\n"
"  --x86[=OPTS]        x86 BCJ filter (32-bit and 64-bit)\n"
"  --arm[=OPTS]        ARM BCJ filter\n"
"  --armthumb[=OPTS]   ARM-Thumb BCJ filter\n"
"  --arm64[=OPTS]      ARM64 BCJ filter\n"
"  --powerpc[=OPTS]    PowerPC BCJ filter (big endian only)\n"
"  --ia64[=OPTS]       IA-64 (Itanium) BCJ filter\n"
"  --sparc[=OPTS]      SPARC BCJ filter\n"
"                      Valid OPTS for all BCJ filters:\n"
"                        start=NUM  start offset for conversions (default=0)"
msgstr ""
"\n"
"  --x86[=选项]        x86 BCJ 过滤器（32 位和 64 位）\n"
"  --arm[=选项]        ARM BCJ 过滤器\n"
"  --armthumb[=选项]   ARM-Thumb BCJ 过滤器\n"
"  --arm64[=选项]      ARM64 BCJ 过滤器\n"
"  --powerpc[=选项]    PowerPC BCJ 过滤器（仅大端序）\n"
"  --ia64[=选项]       IA-64 (Itanium，安腾) BCJ 过滤器\n"
"  --sparc[=选项]      SPARC BCJ 过滤器\n"
"                      所有过滤器可用选项：\n"
"                        start=数字  转换的起始偏移量（默认=0）"

#: src/xz/message.c:1086
msgid ""
"\n"
"  --delta[=OPTS]      Delta filter; valid OPTS (valid values; default):\n"
"                        dist=NUM   distance between bytes being subtracted\n"
"                                   from each other (1-256; 1)"
msgstr ""
"\n"
"  --delta[=选项]      增量过滤器；有效选项（有效值；默认值）：\n"
"                        dist=NUM   相减的字节之间的距离 (1-256; 1)"

#: src/xz/message.c:1094
msgid ""
"\n"
" Other options:\n"
msgstr ""
"\n"
" 其它选项：\n"

#: src/xz/message.c:1097
msgid ""
"  -q, --quiet         suppress warnings; specify twice to suppress errors too\n"
"  -v, --verbose       be verbose; specify twice for even more verbose"
msgstr ""
"  -q, --quiet         不显示警告信息；指定两次可不显示错误信息\n"
"  -v, --verbose       输出详细信息；指定两次可以输出更详细的信息"

#: src/xz/message.c:1102
msgid "  -Q, --no-warn       make warnings not affect the exit status"
msgstr "  -Q, --no-warn       使得警告信息不影响程序退出返回值"

#: src/xz/message.c:1104
msgid "      --robot         use machine-parsable messages (useful for scripts)"
msgstr "      --robot         使用机器可解析的信息（对于脚本有用）"

#: src/xz/message.c:1107
msgid ""
"      --info-memory   display the total amount of RAM and the currently active\n"
"                      memory usage limits, and exit"
msgstr "      --info-memory   显示 RAM 总量和当前配置的内存用量限制，然后退出"

#: src/xz/message.c:1110
msgid ""
"  -h, --help          display the short help (lists only the basic options)\n"
"  -H, --long-help     display this long help and exit"
msgstr ""
"  -h, --help          显示短帮助信息（仅列出基本选项）\n"
"  -H, --long-help     显示本长帮助信息"

#: src/xz/message.c:1114
msgid ""
"  -h, --help          display this short help and exit\n"
"  -H, --long-help     display the long help (lists also the advanced options)"
msgstr ""
"  -h, --help          显示本短帮助信息并退出\n"
"  -H, --long-help     显示长帮助信息（同时列出高级选项）"

#: src/xz/message.c:1119
msgid "  -V, --version       display the version number and exit"
msgstr "  -V, --version       显示软件版本号并退出"

#: src/xz/message.c:1121
msgid ""
"\n"
"With no FILE, or when FILE is -, read standard input.\n"
msgstr ""
"\n"
"如果没有指定文件，或者文件为\"-\"，则从标准输入读取。\n"

#. TRANSLATORS: This message indicates the bug reporting address
#. for this package. Please add _another line_ saying
#. "Report translation bugs to <...>\n" with the email or WWW
#. address for translation bugs. Thanks.
#: src/xz/message.c:1127
#, c-format
msgid "Report bugs to <%s> (in English or Finnish).\n"
msgstr ""
"请使用英文或芬兰语向 <%s> 报告软件错误。\n"
"请使用中文向 TP 简体中文翻译团队 <i18n-zh@googlegroups.com>\n"
"报告软件的简体中文翻译错误。\n"

#: src/xz/message.c:1129
#, c-format
msgid "%s home page: <%s>\n"
msgstr "%s 主页：<%s>\n"

#: src/xz/message.c:1133
msgid "THIS IS A DEVELOPMENT VERSION NOT INTENDED FOR PRODUCTION USE."
msgstr "这是开发版本，不适用于生产环境使用。"

#: src/xz/options.c:86
#, c-format
msgid "%s: Options must be `name=value' pairs separated with commas"
msgstr "%s：选项必须按照“名称=值”的格式成对出现，使用半角逗号分隔"

#: src/xz/options.c:93
#, c-format
msgid "%s: Invalid option name"
msgstr "%s：无效的选项名称"

#: src/xz/options.c:113
#, c-format
msgid "%s: Invalid option value"
msgstr "%s：无效的选项值"

#: src/xz/options.c:247
#, c-format
msgid "Unsupported LZMA1/LZMA2 preset: %s"
msgstr "不支持的 LZMA1/LZMA2 预设等级：%s"

#: src/xz/options.c:355
msgid "The sum of lc and lp must not exceed 4"
msgstr "lc 和 lp 的和必须不大于 4"

#: src/xz/suffix.c:134 src/xz/suffix.c:265
#, c-format
msgid "%s: With --format=raw, --suffix=.SUF is required unless writing to stdout"
msgstr "%s：在启用 --format-raw 选项时，必须指定 --suffix=.SUF 获知写入至标准输出"

#: src/xz/suffix.c:165
#, c-format
msgid "%s: Filename has an unknown suffix, skipping"
msgstr "%s：文件名有未知后缀，跳过"

#: src/xz/suffix.c:186
#, c-format
msgid "%s: File already has `%s' suffix, skipping"
msgstr "%s：文件已有“%s”后缀名，跳过"

#: src/xz/suffix.c:402
#, c-format
msgid "%s: Invalid filename suffix"
msgstr "%s：无效的文件名后缀"

#: src/xz/util.c:71
#, c-format
msgid "%s: Value is not a non-negative decimal integer"
msgstr "%s：值不是非负十进制整数"

#: src/xz/util.c:113
#, c-format
msgid "%s: Invalid multiplier suffix"
msgstr "%s：无效的乘数后缀"

#: src/xz/util.c:115
msgid "Valid suffixes are `KiB' (2^10), `MiB' (2^20), and `GiB' (2^30)."
msgstr "有效的后缀包括“KiB”（2^10）、“MiB”（2^20）和“GiB”（2^30）。"

#: src/xz/util.c:132
#, c-format
msgid "Value of the option `%s' must be in the range [%<PRIu64>, %<PRIu64>]"
msgstr "选项“%s”的值必须位于 [%<PRIu64>, %<PRIu64>] 范围内"

#: src/xz/util.c:269
msgid "Compressed data cannot be read from a terminal"
msgstr "压缩数据不能从终端读取"

#: src/xz/util.c:282
msgid "Compressed data cannot be written to a terminal"
msgstr "压缩数据不能向终端写入"

#: src/common/tuklib_exit.c:40
msgid "Writing to standard output failed"
msgstr "写入标准输出失败"

#: src/common/tuklib_exit.c:43
msgid "Unknown error"
msgstr "未知错误"

#~ msgid "The selected match finder requires at least nice=%<PRIu32>"
#~ msgstr "所选中的匹配搜索器（match finder）至少需要 nice=%<PRIu32>"

#~ msgid "Sandbox is disabled due to incompatible command line arguments"
#~ msgstr "沙盒已因不兼容的命令行参数而禁用"

#~ msgid "Sandbox was successfully enabled"
#~ msgstr "已成功启用沙盒"

#~ msgid "Memory usage limit for compression:    "
#~ msgstr "用于压缩的内存用量限制：  "

#~ msgid "  Streams:            %s\n"
#~ msgstr "  流：                %s\n"

#~ msgid "  Blocks:             %s\n"
#~ msgstr "  块：                %s\n"

#~ msgid "  Ratio:              %s\n"
#~ msgstr "  压缩比：            %s\n"

#~ msgid "  Check:              %s\n"
#~ msgstr "  校验方式：          %s\n"

#~ msgid ""
#~ "  Streams:\n"
#~ "    Stream    Blocks      CompOffset    UncompOffset        CompSize      UncompSize  Ratio  Check      Padding"
#~ msgstr ""
#~ "  流：\n"
#~ "       流         块      压缩偏移量      解压偏移量        压缩大小        解压大小   比例   校验         填充"

#~ msgid ""
#~ "  Blocks:\n"
#~ "    Stream     Block      CompOffset    UncompOffset       TotalSize      UncompSize  Ratio  Check"
#~ msgstr ""
#~ "  块：\n"
#~ "        流        块      压缩偏移量      解压偏移量        总计大小        解压大小   比例   校验"

#~ msgid "      CheckVal %*s Header  Flags        CompSize    MemUsage  Filters"
#~ msgstr "      CheckVal %*s   头部   标记        压缩大小    内存使用   过滤器"