# Chinese (traditional) translations for dos2unix. # This file is distributed under the same license as the dos2unix package. # # mail6543210 , 2014. msgid "" msgstr "" "Project-Id-Version: dos2unix 6.0.5-b3\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2014-08-11 23:58+0200\n" "PO-Revision-Date: 2014-03-14 00:43+0800\n" "Last-Translator: mail6543210 \n" "Language-Team: Chinese (traditional) \n" "Language: zh_TW\n" "X-Bugs: Report translation errors to the Language-Team address.\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Generator: Poedit 1.6.4\n" "Plural-Forms: nplurals=1; plural=0;\n" #: dos2unix.c:76 msgid "" "Copyright (C) 2009-2014 Erwin Waterlander\n" "Copyright (C) 1998 Christian Wurll (Version 3.1)\n" "Copyright (C) 1998 Bernd Johannes Wuebben (Version 3.0)\n" "Copyright (C) 1994-1995 Benjamin Lin\n" "All rights reserved.\n" "\n" msgstr "" "Copyright (C) 2009-2014 Erwin Waterlander\n" "Copyright (C) 1998 Christian Wurll (版本 3.1)\n" "Copyright (C) 1998 Bernd Johannes Wuebben (版本 3.0)\n" "Copyright (C) 1994-1995 Benjamin Lin\n" "保留所有權利。\n" "\n" #: dos2unix.c:169 dos2unix.c:207 unix2dos.c:133 unix2dos.c:186 #, c-format msgid "Binary symbol 0x00%02X found at line %d\n" msgstr "找到二進位符號0x00%02X 在第%d 行\n" #: dos2unix.c:184 dos2unix.c:223 dos2unix.c:248 dos2unix.c:367 dos2unix.c:403 #: dos2unix.c:425 unix2dos.c:163 unix2dos.c:200 unix2dos.c:224 unix2dos.c:242 #: unix2dos.c:373 unix2dos.c:407 unix2dos.c:428 unix2dos.c:443 #, c-format msgid "can not write to output file: %s\n" msgstr "無法寫入輸出檔:%s\n" #: dos2unix.c:265 dos2unix.c:441 unix2dos.c:257 unix2dos.c:458 #, c-format msgid "program error, invalid conversion mode %d\n" msgstr "程式錯誤,不合法的轉換模式 %d\n" #: dos2unix.c:272 dos2unix.c:448 unix2dos.c:264 unix2dos.c:465 #, c-format msgid "Converted %d out of %d line breaks.\n" msgstr "" #: dos2unix.c:329 unix2dos.c:321 #, c-format msgid "using code page %d.\n" msgstr "使用 %d 編碼頁。\n" #: dos2unix.c:354 dos2unix.c:389 unix2dos.c:344 unix2dos.c:395 #, c-format msgid "Binary symbol 0x%02X found at line %d\n" msgstr "找到二進位符號0x%02X 在第%d 行\n" #: dos2unix.c:534 unix2dos.c:551 #, c-format msgid "Failed to open temporary output file: %s\n" msgstr "暫存檔 %s 開啟失敗\n" #: dos2unix.c:541 unix2dos.c:558 #, c-format msgid "using %s as temporary file\n" msgstr "使用 %s 作為暫存檔\n" #: dos2unix.c:582 unix2dos.c:599 #, c-format msgid "Assuming UTF-16LE encoding.\n" msgstr "" #: dos2unix.c:587 unix2dos.c:604 #, c-format msgid "Assuming UTF-16BE encoding.\n" msgstr "" #: dos2unix.c:671 unix2dos.c:688 #, c-format msgid "Failed to write to temporary output file %s: %s\n" msgstr "暫存檔寫入失敗%s:%s\n" #: dos2unix.c:706 unix2dos.c:723 #, c-format msgid "Failed to change the permissions of temporary output file %s: %s\n" msgstr "輸出暫存檔 %s 權限變更失敗:%s\n" #: dos2unix.c:725 unix2dos.c:742 #, c-format msgid "Failed to change the owner and group of temporary output file %s: %s\n" msgstr "輸出暫存檔 %s 擁有者及群組變更失敗:%s\n" #: dos2unix.c:778 unix2dos.c:795 #, c-format msgid "problems resolving symbolic link '%s'\n" msgstr "解析符號連結'%s' 發生問題\n" #: dos2unix.c:779 dos2unix.c:813 unix2dos.c:796 unix2dos.c:830 #, c-format msgid " output file remains in '%s'\n" msgstr " 輸出檔案'%s' 未改變\n" #: dos2unix.c:808 unix2dos.c:825 #, c-format msgid "problems renaming '%s' to '%s': %s\n" msgstr "重新命名「%s」到「%s」錯誤:%s\n" #: dos2unix.c:811 unix2dos.c:828 #, c-format msgid " which is the target of symbolic link '%s'\n" msgstr " 後者為符號連結'%s' 的目標\n" #: dos2unix.c:909 unix2dos.c:926 msgid "error: Value of environment variable DOS2UNIX_LOCALEDIR is too long.\n" msgstr "錯誤:環境變數DOS2UNIX_LOCALEDIR 的值太長。\n" #: dos2unix.c:1024 dos2unix.c:1066 unix2dos.c:1041 unix2dos.c:1083 #, c-format msgid "active code page: %d\n" msgstr "作用中編碼頁:%d\n" #: dos2unix.c:1076 unix2dos.c:1093 #, c-format msgid "invalid %s conversion mode specified\n" msgstr "指定的轉換模式 %s 不合法\n" #: dos2unix.c:1086 unix2dos.c:1103 #, c-format msgid "option '%s' requires an argument\n" msgstr "選項'%s' 需要一個引數\n" #: dos2unix.c:1099 dos2unix.c:1113 dos2unix.c:1307 unix2dos.c:1116 #: unix2dos.c:1130 unix2dos.c:1330 #, c-format msgid "target of file %s not specified in new-file mode\n" msgstr "新檔模式中未指明檔案 %s 的目的位置\n" #: dos2unix.c:1143 dos2unix.c:1227 unix2dos.c:1160 unix2dos.c:1247 #, c-format msgid "Skipping %s, not a regular file.\n" msgstr "略過 %s,不是一個普通檔案。\n" #: dos2unix.c:1150 unix2dos.c:1167 #, c-format msgid "Skipping %s, output file %s is a symbolic link.\n" msgstr "略過 %s,輸出檔 %s 是一個符號連結。.\n" #: dos2unix.c:1157 dos2unix.c:1241 unix2dos.c:1174 unix2dos.c:1261 #, c-format msgid "Skipping symbolic link %s, target is not a regular file.\n" msgstr "略過符號連結 %s,目標不是一個普通檔案。\n" #: dos2unix.c:1164 unix2dos.c:1181 #, c-format msgid "Skipping %s, target of symbolic link %s is not a regular file.\n" msgstr "略過 %s,符號連結 %s 目標不是一個普通檔案。\n" #: dos2unix.c:1171 dos2unix.c:1248 unix2dos.c:1188 unix2dos.c:1268 #, c-format msgid "Skipping binary file %s\n" msgstr "略過二進位檔案%s\n" #: dos2unix.c:1178 dos2unix.c:1255 unix2dos.c:1195 unix2dos.c:1275 #, c-format msgid "code page %d is not supported.\n" msgstr "未支援%d 編碼頁。\n" #: dos2unix.c:1185 dos2unix.c:1262 unix2dos.c:1202 unix2dos.c:1282 #, c-format msgid "Skipping UTF-16 file %s, the current locale character encoding is not UTF-8.\n" msgstr "略過 UTF-16 檔案 %s,目前語言字元編碼並非UTF-8。\n" #: dos2unix.c:1192 dos2unix.c:1269 unix2dos.c:1209 unix2dos.c:1289 #, c-format msgid "Skipping UTF-16 file %s, the size of wchar_t is %d bytes.\n" msgstr "略過 UTF-16 檔案 %s,wchar_t 的大小是 %d 位元組。\n" #: dos2unix.c:1199 dos2unix.c:1276 unix2dos.c:1216 unix2dos.c:1296 #, c-format msgid "Skipping UTF-16 file %s, an UTF-16 conversion error occurred.\n" msgstr "略過 UTF-16 檔案 %s,UTF-16 轉換發生錯誤。\n" #: dos2unix.c:1205 #, c-format msgid "converting file %s to file %s in Unix format...\n" msgstr "正在轉換 %s 為Unix 格式到 %s...\n" #: dos2unix.c:1212 unix2dos.c:1232 #, c-format msgid "problems converting file %s to file %s\n" msgstr "轉換檔案 %s 到 %s 錯誤\n" #: dos2unix.c:1234 unix2dos.c:1254 #, c-format msgid "Skipping symbolic link %s.\n" msgstr "略過符號連結 %s。\n" #: dos2unix.c:1282 #, c-format msgid "converting file %s to Unix format...\n" msgstr "正在轉換 %s 為Unix 格式...\n" #: dos2unix.c:1289 unix2dos.c:1312 #, c-format msgid "problems converting file %s\n" msgstr "轉換檔案 %s 錯誤\n" #: unix2dos.c:66 msgid "" "Copyright (C) 2009-2014 Erwin Waterlander\n" "Copyright (C) 1994-1995 Benjamin Lin\n" "All rights reserved.\n" "\n" msgstr "" "Copyright © 2009-2014 Erwin Waterlander\n" "Copyright © 1994-1995 Benjamin Lin\n" "保留所有權利。\n" "\n" #: unix2dos.c:1223 #, c-format msgid "converting file %s to file %s in Mac format...\n" msgstr "正在轉換 %s 為Mac 格式到 %s...\n" #: unix2dos.c:1225 #, c-format msgid "converting file %s to file %s in DOS format...\n" msgstr "正在轉換 %s 為DOS 格式到 %s...\n" #: unix2dos.c:1303 #, c-format msgid "converting file %s to Mac format...\n" msgstr "正在轉換 %s 為Mac 格式...\n" #: unix2dos.c:1305 #, c-format msgid "converting file %s to DOS format...\n" msgstr "正在轉換 %s 為DOS 格式...\n" #: common.c:186 msgid "" "Redistribution and use in source and binary forms, with or without\n" "modification, are permitted provided that the following conditions\n" "are met:\n" "1. Redistributions of source code must retain the above copyright\n" " notice, this list of conditions and the following disclaimer.\n" "2. Redistributions in binary form must reproduce the above copyright\n" " notice in the documentation and/or other materials provided with\n" " the distribution.\n" "\n" msgstr "" "Redistribution and use in source and binary forms, with or without\n" "modification, are permitted provided that the following conditions\n" "are met:\n" "1. Redistributions of source code must retain the above copyright\n" " notice, this list of conditions and the following disclaimer.\n" "2. Redistributions in binary form must reproduce the above copyright\n" " notice in the documentation and/or other materials provided with\n" " the distribution.\n" "\n" #: common.c:196 msgid "" "THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY\n" "EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE\n" "IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR\n" "PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE\n" "FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR\n" "CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT\n" "OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR\n" "BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,\n" "WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE\n" "OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN\n" "IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.\n" msgstr "" "THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY\n" "EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE\n" "IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR\n" "PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE\n" "FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR\n" "CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT\n" "OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR\n" "BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,\n" "WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE\n" "OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN\n" "IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.\n" #: common.c:213 #, c-format msgid "Usage: %s [options] [file ...] [-n infile outfile ...]\n" msgstr "用法: %s [選項] [file ...] [-n infile outfile ...]\n" #: common.c:214 #, c-format msgid " -ascii convert only line breaks (default)\n" msgstr " -ascii 只轉換換行字元(預設)\n" #: common.c:215 #, c-format msgid " -iso conversion between DOS and ISO-8859-1 character set\n" msgstr " -iso 在DOS 和ISO-8859-1 字元集間轉換\n" #: common.c:216 #, c-format msgid " -1252 use Windows code page 1252 (Western European)\n" msgstr " -1252 使用Windows 1252 編碼頁(西歐)\n" #: common.c:217 #, c-format msgid " -437 use DOS code page 437 (US) (default)\n" msgstr " -437 使用DOS 437 編碼頁(US) (預設)\n" #: common.c:218 #, c-format msgid " -850 use DOS code page 850 (Western European)\n" msgstr " -850 使用DOS 850 編碼頁(西歐)\n" #: common.c:219 #, c-format msgid " -860 use DOS code page 860 (Portuguese)\n" msgstr " -860 使用DOS 860 編碼頁(葡萄牙)\n" #: common.c:220 #, c-format msgid " -863 use DOS code page 863 (French Canadian)\n" msgstr " -863 使用DOS 863 編碼頁(加拿大法語)\n" #: common.c:221 #, c-format msgid " -865 use DOS code page 865 (Nordic)\n" msgstr " -865 使用DOS 865 編碼頁(北歐)\n" #: common.c:222 #, c-format msgid " -7 convert 8 bit characters to 7 bit space\n" msgstr " -7 轉換8 位元字元到7 位元空間\n" #: common.c:224 #, fuzzy, c-format #| msgid " -m, --add-bom add UTF-8 Byte Order Mark\n" msgid " -b, --keep-bom keep Byte Order Mark\n" msgstr " -m, --add-bom 加入UTF-8 BOM\n" #: common.c:226 #, fuzzy, c-format #| msgid " -m, --add-bom add UTF-8 Byte Order Mark\n" msgid " -b, --keep-bom keep Byte Order Mark (default)\n" msgstr " -m, --add-bom 加入UTF-8 BOM\n" #: common.c:227 #, c-format msgid "" " -c, --convmode conversion mode\n" " convmode ascii, 7bit, iso, mac, default to ascii\n" msgstr "" " -c, --convmode 轉換模式\n" " convmode ascii, 7bit, iso, mac, 預設為ascii\n" #: common.c:229 #, c-format msgid " -f, --force force conversion of binary files\n" msgstr " -f, --force 強制轉換二進位檔案\n" #: common.c:230 #, c-format msgid " -h, --help display this help text\n" msgstr " -h, --help 顯示本說明文字\n" #: common.c:231 #, c-format msgid " -k, --keepdate keep output file date\n" msgstr " -k, --keepdate 保留輸出檔時間\n" #: common.c:232 #, c-format msgid " -L, --license display software license\n" msgstr " -L, --license 顯示軟體授權\n" #: common.c:233 #, c-format msgid " -l, --newline add additional newline\n" msgstr " -l, --newline 加入額外的換行\n" #: common.c:234 #, fuzzy, c-format #| msgid " -m, --add-bom add UTF-8 Byte Order Mark\n" msgid " -m, --add-bom add Byte Order Mark (default UTF-8)\n" msgstr " -m, --add-bom 加入UTF-8 BOM\n" #: common.c:235 #, c-format msgid "" " -n, --newfile write to new file\n" " infile original file in new-file mode\n" " outfile output file in new-file mode\n" msgstr "" " -n, --newfile 寫入新檔\n" " infile 新檔模式中的原始檔案\n" " outfile 新檔模式中的輸出檔案\n" #: common.c:238 #, c-format msgid "" " -o, --oldfile write to old file (default)\n" " file ... files to convert in old-file mode\n" msgstr "" " -o, --oldfile 寫入原檔案(預設)\n" " file ... 原檔模式中要轉換的檔案\n" #: common.c:240 #, c-format msgid "" " -q, --quiet quiet mode, suppress all warnings\n" " (always on in stdio mode)\n" msgstr "" " -q, --quiet 安靜模式,抑制所有警告\n" " (標準輸出入模式下永遠啟用)\n" #: common.c:243 #, fuzzy, c-format #| msgid " -m, --add-bom add UTF-8 Byte Order Mark\n" msgid " -r, --remove-bom remove Byte Order Mark (default)\n" msgstr " -m, --add-bom 加入UTF-8 BOM\n" #: common.c:245 #, fuzzy, c-format #| msgid " -m, --add-bom add UTF-8 Byte Order Mark\n" msgid " -r, --remove-bom remove Byte Order Mark\n" msgstr " -m, --add-bom 加入UTF-8 BOM\n" #: common.c:246 #, c-format msgid " -s, --safe skip binary files (default)\n" msgstr " -s, --safe 略過二進位檔案(預設)\n" #: common.c:248 #, c-format msgid " -u, --keep-utf16 keep UTF-16 encoding\n" msgstr "" #: common.c:249 #, c-format msgid " -ul, --assume-utf16le assume that the input format is UTF-16LE\n" msgstr " -ul, --assume-utf16le 假設輸入檔格式為UTF-16LE\n" #: common.c:250 #, c-format msgid " -ub, --assume-utf16be assume that the input format is UTF-16BE\n" msgstr " -ub, --assume-utf16be 假設輸入檔格式為UTF-16BE\n" #: common.c:252 #, c-format msgid " -v, --verbose verbose operation\n" msgstr "" #: common.c:254 #, c-format msgid " -F, --follow-symlink follow symbolic links and convert the targets\n" msgstr " -F, --follow-symlink 依循符號連結轉換其目標檔案\n" #: common.c:257 #, c-format msgid "" " -R, --replace-symlink replace symbolic links with converted files\n" " (original target files remain unchanged)\n" msgstr "" " -R, --replace-symlink 取代符號連結為轉換後的檔案\n" " (原連結目標檔案保持不變)\n" #: common.c:259 #, c-format msgid " -S, --skip-symlink keep symbolic links and targets unchanged (default)\n" msgstr " -S, --skip-symlink 保持符號連結及其目標不變(預設)\n" #: common.c:261 #, c-format msgid " -V, --version display version number\n" msgstr " -V, --version 顯示版本號碼\n" #: common.c:273 msgid "DOS 16 bit version (WATCOMC).\n" msgstr "DOS 16 位元版本(WATCOMC)。\n" #: common.c:275 msgid "DOS 16 bit version (TURBOC).\n" msgstr "DOS 16 位元版本(TURBOC)。\n" #: common.c:277 msgid "DOS 32 bit version (WATCOMC).\n" msgstr "DOS 32 位元版本(WATCOMC)。\n" #: common.c:279 msgid "DOS 32 bit version (DJGPP).\n" msgstr "DOS 32 位元版本(DJGPP)。\n" #: common.c:281 msgid "MSYS version.\n" msgstr "MSYS 版本。\n" #: common.c:283 msgid "Cygwin version.\n" msgstr "Cygwin 版本。\n" #: common.c:285 msgid "Windows 64 bit version (MinGW-w64).\n" msgstr "Windows 64 位元版本(MinGW-w64)。\n" #: common.c:287 msgid "Windows 32 bit version (WATCOMC).\n" msgstr "Windows 32 位元版本(WATCOMC)。\n" #: common.c:289 msgid "Windows 32 bit version (MinGW-w64).\n" msgstr "Windows 32 位元版本(MinGW-w64)。\n" #: common.c:291 msgid "Windows 32 bit version (MinGW).\n" msgstr "Windows 32 位元版本(MinGW)。\n" #: common.c:293 #, c-format msgid "Windows 64 bit version (MSVC %d).\n" msgstr "Windows 64 位元版本(MSVC %d)。\n" #: common.c:295 #, c-format msgid "Windows 32 bit version (MSVC %d).\n" msgstr "Windows 32 位元版本(MSVC %d)。\n" #: common.c:297 msgid "OS/2 version (WATCOMC).\n" msgstr "OS/2 版本(WATCOMC)。\n" #: common.c:299 msgid "OS/2 version (EMX).\n" msgstr "OS/2 版本(EMX)。\n" #: common.c:302 msgid "With Unicode UTF-16 support.\n" msgstr "有Unicode UTF-16 支援。\n" #: common.c:304 msgid "Without Unicode UTF-16 support.\n" msgstr "無Unicode UTF-16 支援。\n" #: common.c:307 msgid "With native language support.\n" msgstr "含本地語言支援。\n" #: common.c:581 common.c:589 common.c:597 common.c:608 #, c-format msgid "Writing %s BOM.\n" msgstr "" #: common.c:620 common.c:624 common.c:628 #, c-format msgid "Input file %s has %s BOM.\n" msgstr ""