# Traditional Chinese Messages for libc. # Copyright (C) 2011 Free Software Foundation, Inc. # This file is distributed under the same license as the glibc package. # Tung-Han Hsieh , 2000. # Yuan-Chung Cheng , 2000. # Wei-Lun Chao , 2005, 2008, 2011. # Wei-Lun Chao , 2012, 2013. # msgid "" msgstr "" "Project-Id-Version: libc 2.17.90.20130724\n" "POT-Creation-Date: 2015-01-20 22:14-0500\n" "PO-Revision-Date: 2013-09-03 13:39+0800\n" "Last-Translator: Wei-Lun Chao \n" "Language-Team: Chinese (traditional) \n" "Language: zh_TW\n" "X-Bugs: Report translation errors to the Language-Team address.\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=1; plural=0;\n" #: argp/argp-help.c:227 #, c-format msgid "%.*s: ARGP_HELP_FMT parameter requires a value" msgstr "%.*s: ARGP_HELP_FMT 參數需要一個值" #: argp/argp-help.c:237 #, c-format msgid "%.*s: Unknown ARGP_HELP_FMT parameter" msgstr "%.*s: 未知的 ARGP_HELP_FMT 參數" #: argp/argp-help.c:250 #, c-format msgid "Garbage in ARGP_HELP_FMT: %s" msgstr "ARGP_HELP_FMT 中無用的資訊: %s" #: argp/argp-help.c:1214 msgid "Mandatory or optional arguments to long options are also mandatory or optional for any corresponding short options." msgstr "長選項的必須或可選用的引數也是相對應短選項的必須或可選用的引數。" #: argp/argp-help.c:1600 msgid "Usage:" msgstr "使用方式:" #: argp/argp-help.c:1604 msgid " or: " msgstr " 或者: " #: argp/argp-help.c:1616 msgid " [OPTION...]" msgstr " [參數…]" #: argp/argp-help.c:1643 #, c-format msgid "Try `%s --help' or `%s --usage' for more information.\n" msgstr "請試著用 `%s --help' 或 `%s --usage' 來獲得更多相關訊息。\n" #: argp/argp-help.c:1671 #, c-format msgid "Report bugs to %s.\n" msgstr "請將程式問題回報至 %s。\n" #: argp/argp-parse.c:101 msgid "Give this help list" msgstr "給出這個使用方式列表" #: argp/argp-parse.c:102 msgid "Give a short usage message" msgstr "給出簡短的使用訊息" #: argp/argp-parse.c:103 catgets/gencat.c:109 catgets/gencat.c:113 #: iconv/iconv_prog.c:60 iconv/iconv_prog.c:61 nscd/nscd.c:105 #: nss/makedb.c:120 msgid "NAME" msgstr "名稱" #: argp/argp-parse.c:104 msgid "Set the program name" msgstr "設定程式名稱" #: argp/argp-parse.c:105 msgid "SECS" msgstr "秒數" #: argp/argp-parse.c:106 msgid "Hang for SECS seconds (default 3600)" msgstr "SECS 秒後掛斷 (預設是 3600)" #: argp/argp-parse.c:167 msgid "Print program version" msgstr "印出程式版本" #: argp/argp-parse.c:183 msgid "(PROGRAM ERROR) No version known!?" msgstr "(程式錯誤) 沒有認得的版本!?" #: argp/argp-parse.c:623 #, c-format msgid "%s: Too many arguments\n" msgstr "%s: 太多的引數\n" #: argp/argp-parse.c:766 msgid "(PROGRAM ERROR) Option should have been recognized!?" msgstr "(程式錯誤) 選項應該已經可辨識!?" #: assert/assert-perr.c:35 #, c-format msgid "%s%s%s:%u: %s%sUnexpected error: %s.\n" msgstr "%s%s%s:%u: %s%s無法預料的錯誤: %s。\n" #: assert/assert.c:101 #, c-format msgid "" "%s%s%s:%u: %s%sAssertion `%s' failed.\n" "%n" msgstr "" "%s%s%s:%u：%s%s假設『%s』失敗。\n" "%n" #: catgets/gencat.c:110 msgid "Create C header file NAME containing symbol definitions" msgstr "產生的 C 標頭檔名內含符號定義" #: catgets/gencat.c:112 msgid "Do not use existing catalog, force new output file" msgstr "不使用現存的 catalog, 強制使用新的輸出檔" #: catgets/gencat.c:113 nss/makedb.c:120 msgid "Write output to file NAME" msgstr "將輸出寫到檔案 NAME 中" #: catgets/gencat.c:118 msgid "" "Generate message catalog.\vIf INPUT-FILE is -, input is read from standard input. If OUTPUT-FILE\n" "is -, output is written to standard output.\n" msgstr "" "產生訊息 catelog。\\v如果輸入檔名是 -, 將從標準輸入讀取輸入。\n" "如果輸出檔名是 -, 則輸出將寫到標準輸出去。\n" #: catgets/gencat.c:123 msgid "" "-o OUTPUT-FILE [INPUT-FILE]...\n" "[OUTPUT-FILE [INPUT-FILE]...]" msgstr "" "-o 輸出檔案名稱 [輸入檔案名稱]...\n" "[輸出檔案名稱 [輸入檔案名稱]...]" #: catgets/gencat.c:229 debug/pcprofiledump.c:209 elf/ldconfig.c:307 #: elf/pldd.c:244 elf/sln.c:85 elf/sprof.c:372 iconv/iconv_prog.c:408 #: iconv/iconvconfig.c:379 locale/programs/locale.c:277 #: locale/programs/localedef.c:376 login/programs/pt_chown.c:88 #: malloc/memusagestat.c:563 nss/getent.c:969 nss/makedb.c:369 #: posix/getconf.c:486 sunrpc/rpcinfo.c:691 #: sysdeps/unix/sysv/linux/lddlibc4.c:61 #, c-format msgid "" "For bug reporting instructions, please see:\n" "%s.\n" msgstr "" "要知道錯誤報告指令，請參看：\n" "%s。\n" #: catgets/gencat.c:245 debug/pcprofiledump.c:225 debug/xtrace.sh:64 #: elf/ldconfig.c:323 elf/ldd.bash.in:38 elf/pldd.c:260 elf/sotruss.sh:75 #: elf/sprof.c:389 iconv/iconv_prog.c:425 iconv/iconvconfig.c:396 #: locale/programs/locale.c:294 locale/programs/localedef.c:402 #: login/programs/pt_chown.c:62 malloc/memusage.sh:71 #: malloc/memusagestat.c:581 nscd/nscd.c:509 nss/getent.c:86 nss/makedb.c:385 #: posix/getconf.c:468 sysdeps/unix/sysv/linux/lddlibc4.c:68 #, c-format msgid "" "Copyright (C) %s Free Software Foundation, Inc.\n" "This is free software; see the source for copying conditions. There is NO\n" "warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.\n" msgstr "" "版權所有 (C) %s 自由軟體基金會。\n" "這是一個自由軟體；請見原始碼的授權條款。這沒有擔保；甚至也沒有專為銷\n" "售或者適合某些特殊目的。\n" #: catgets/gencat.c:250 debug/pcprofiledump.c:230 debug/xtrace.sh:68 #: elf/ldconfig.c:328 elf/pldd.c:265 elf/sprof.c:395 iconv/iconv_prog.c:430 #: iconv/iconvconfig.c:401 locale/programs/locale.c:299 #: locale/programs/localedef.c:407 malloc/memusage.sh:75 #: malloc/memusagestat.c:586 nscd/nscd.c:514 nss/getent.c:91 nss/makedb.c:390 #: posix/getconf.c:473 #, c-format msgid "Written by %s.\n" msgstr "作者 %s。\n" #: catgets/gencat.c:281 msgid "*standard input*" msgstr "*標準輸入*" #: catgets/gencat.c:287 iconv/iconv_charmap.c:167 iconv/iconv_prog.c:293 #: nss/makedb.c:246 #, c-format msgid "cannot open input file `%s'" msgstr "無法開啟輸入檔 `%s'" #: catgets/gencat.c:416 catgets/gencat.c:491 msgid "illegal set number" msgstr "不合法的集合編號" #: catgets/gencat.c:443 msgid "duplicate set definition" msgstr "複製集合定義" #: catgets/gencat.c:445 catgets/gencat.c:617 catgets/gencat.c:669 msgid "this is the first definition" msgstr "此為第一個定義" #: catgets/gencat.c:516 #, c-format msgid "unknown set `%s'" msgstr "不明的集合 `%s'" #: catgets/gencat.c:557 msgid "invalid quote character" msgstr "不適用的引用字元" #: catgets/gencat.c:570 #, c-format msgid "unknown directive `%s': line ignored" msgstr "不明的指令 `%s': 此列忽略" #: catgets/gencat.c:615 msgid "duplicated message number" msgstr "重複的訊息編號" #: catgets/gencat.c:666 msgid "duplicated message identifier" msgstr "重複的訊息識別符號" #: catgets/gencat.c:723 msgid "invalid character: message ignored" msgstr "不適用的字元: 忽略此訊息" #: catgets/gencat.c:766 msgid "invalid line" msgstr "無效的輸入列" #: catgets/gencat.c:820 msgid "malformed line ignored" msgstr "忽略奇怪的列" #: catgets/gencat.c:984 catgets/gencat.c:1025 #, c-format msgid "cannot open output file `%s'" msgstr "無法開啟輸出檔 `%s'" #: catgets/gencat.c:1187 locale/programs/linereader.c:560 msgid "invalid escape sequence" msgstr "無效的跳脫序列" #: catgets/gencat.c:1209 msgid "unterminated message" msgstr "沒有結尾的訊息" #: catgets/gencat.c:1233 #, c-format msgid "while opening old catalog file" msgstr "在開啟舊的類別檔案時" #: catgets/gencat.c:1324 #, c-format msgid "conversion modules not available" msgstr "轉換模組不存在" #: catgets/gencat.c:1350 #, c-format msgid "cannot determine escape character" msgstr "無法決定跳脫字元" #: debug/pcprofiledump.c:53 msgid "Don't buffer output" msgstr "不要將輸入存入緩衝區" #: debug/pcprofiledump.c:58 msgid "Dump information generated by PC profiling." msgstr "將產生於 PC 測速評估的資料傾卸出來" #: debug/pcprofiledump.c:61 msgid "[FILE]" msgstr "[檔案]" #: debug/pcprofiledump.c:108 #, c-format msgid "cannot open input file" msgstr "無法開啟輸入檔" #: debug/pcprofiledump.c:115 #, c-format msgid "cannot read header" msgstr "無法讀取標頭資料" #: debug/pcprofiledump.c:179 #, c-format msgid "invalid pointer size" msgstr "無效的指標大小" #: debug/xtrace.sh:26 debug/xtrace.sh:44 msgid "Usage: xtrace [OPTION]... PROGRAM [PROGRAMOPTION]...\\n" msgstr "用法：xtrace [選項]… 程式 [PROGRAMOPTION]…\\n" #: debug/xtrace.sh:32 elf/sotruss.sh:56 elf/sotruss.sh:67 elf/sotruss.sh:135 #: malloc/memusage.sh:26 msgid "Try \\`%s --help' or \\`%s --usage' for more information.\\n" msgstr "請嘗試 \\『%s --help』或\\『%s --usage』以獲得更多資訊。\\n" #: debug/xtrace.sh:38 msgid "%s: option '%s' requires an argument.\\n" msgstr "%s：選項『%s』需要一個引數.\\n" #: debug/xtrace.sh:45 msgid "" "Trace execution of program by printing currently executed function.\n" "\n" " --data=FILE Don't run the program, just print the data from FILE.\n" "\n" " -?,--help Print this help and exit\n" " --usage Give a short usage message\n" " -V,--version Print version information and exit\n" "\n" "Mandatory arguments to long options are also mandatory for any corresponding\n" "short options.\n" "\n" msgstr "" "經由列印目前執行的函式來追蹤程式的執行。\n" "\n" " --data=檔案 無法運行程式，僅從檔案印出資料。\n" "\n" " -?,--help 列印這份說明然後離開\n" " --usage 給出簡短用法訊息\n" " -V,--version 印出版本資訊然後離開\n" "\n" "對於長選項必要的引數同樣必要於任何相應的\n" "短選項。\n" "\n" #: debug/xtrace.sh:57 elf/ldd.bash.in:55 elf/sotruss.sh:49 #: malloc/memusage.sh:64 msgid "For bug reporting instructions, please see:\\\\n%s.\\\\n" msgstr "要知道錯誤報告指令，請參看:\\\\n%s.\\\\n" #: debug/xtrace.sh:125 msgid "xtrace: unrecognized option \\`$1'\\n" msgstr "xtrace：無法辨識的選項「$1」\\n" #: debug/xtrace.sh:138 msgid "No program name given\\n" msgstr "未給定程式名稱\\n" #: debug/xtrace.sh:146 #, sh-format msgid "executable \\`$program' not found\\n" msgstr "可執行檔案「$program」找不到\\n" #: debug/xtrace.sh:150 #, sh-format msgid "\\`$program' is no executable\\n" msgstr "「$program」不是可執行檔案\\n" #: dlfcn/dlinfo.c:63 msgid "RTLD_SELF used in code not dynamically loaded" msgstr "程式碼所使用的 RTLD_SELF 沒有動態載入" #: dlfcn/dlinfo.c:72 msgid "unsupported dlinfo request" msgstr "未支援的 dlinfo 請求" #: dlfcn/dlmopen.c:63 msgid "invalid namespace" msgstr "無效的命名空間" #: dlfcn/dlmopen.c:68 msgid "invalid mode" msgstr "無效的模式" #: dlfcn/dlopen.c:64 msgid "invalid mode parameter" msgstr "無效的模式參數" #: elf/cache.c:69 msgid "unknown" msgstr "未知" #: elf/cache.c:135 msgid "Unknown OS" msgstr "未知的作業系統" #: elf/cache.c:140 #, c-format msgid ", OS ABI: %s %d.%d.%d" msgstr ", OS ABI: %s %d.%d.%d" #: elf/cache.c:157 elf/ldconfig.c:1340 #, c-format msgid "Can't open cache file %s\n" msgstr "無法開啟快取檔 %s\n" #: elf/cache.c:171 #, c-format msgid "mmap of cache file failed.\n" msgstr "快取檔案 mmap 失敗。\n" #: elf/cache.c:175 elf/cache.c:189 #, c-format msgid "File is not a cache file.\n" msgstr "檔案並非快取檔。\n" #: elf/cache.c:222 elf/cache.c:232 #, c-format msgid "%d libs found in cache `%s'\n" msgstr "%d 函式庫在快取 `%s' 中找到\n" #: elf/cache.c:426 #, c-format msgid "Can't create temporary cache file %s" msgstr "無法產生暫時的快取檔 %s" #: elf/cache.c:434 elf/cache.c:444 elf/cache.c:448 elf/cache.c:453 #, c-format msgid "Writing of cache data failed" msgstr "寫入快取資料時發生錯誤" #: elf/cache.c:458 #, c-format msgid "Changing access rights of %s to %#o failed" msgstr "更改 %s 的存取權限為 %#o 失敗" #: elf/cache.c:463 #, c-format msgid "Renaming of %s to %s failed" msgstr "將 %s 改名為 %s 失敗" #: elf/dl-close.c:385 elf/dl-open.c:470 msgid "cannot create scope list" msgstr "無法建立作用域列表" #: elf/dl-close.c:770 msgid "shared object not open" msgstr "共用目的檔案沒有開啟" #: elf/dl-deps.c:112 msgid "DST not allowed in SUID/SGID programs" msgstr "DST 不允許在 SUID/SGID 的程式中" #: elf/dl-deps.c:125 msgid "empty dynamic string token substitution" msgstr "空的動態字串字組替換" #: elf/dl-deps.c:131 #, c-format msgid "cannot load auxiliary `%s' because of empty dynamic string token substitution\n" msgstr "由於空的動態字串字組替換而無法載入外部的 `%s'\n" #: elf/dl-deps.c:467 msgid "cannot allocate dependency list" msgstr "無法配置相關性列表" #: elf/dl-deps.c:504 elf/dl-deps.c:564 msgid "cannot allocate symbol search list" msgstr "無法配置符號搜尋列表" #: elf/dl-deps.c:544 msgid "Filters not supported with LD_TRACE_PRELINKING" msgstr "過濾程式不支援與 LD_TRACE_PRELINKING 共用" #: elf/dl-error.c:77 msgid "DYNAMIC LINKER BUG!!!" msgstr "動態連接程式有問題!!!" #: elf/dl-error.c:127 msgid "error while loading shared libraries" msgstr "載入共用函式庫時發生錯誤" #: elf/dl-fptr.c:88 sysdeps/hppa/dl-fptr.c:94 msgid "cannot map pages for fdesc table" msgstr "無法將頁面對映於 fdesc 表格" #: elf/dl-fptr.c:192 sysdeps/hppa/dl-fptr.c:207 msgid "cannot map pages for fptr table" msgstr "無法將頁面對映於 fptr 表格" #: elf/dl-fptr.c:221 sysdeps/hppa/dl-fptr.c:236 msgid "internal error: symidx out of range of fptr table" msgstr "內部錯誤：symidx 超出 fptr 表格的範圍" #: elf/dl-hwcaps.c:184 elf/dl-hwcaps.c:196 msgid "cannot create capability list" msgstr "無法建立 capability 列表" #: elf/dl-load.c:410 msgid "cannot allocate name record" msgstr "無法配置名稱紀錄" #: elf/dl-load.c:495 elf/dl-load.c:611 elf/dl-load.c:694 elf/dl-load.c:813 msgid "cannot create cache for search path" msgstr "無法為搜尋路徑建立快取" #: elf/dl-load.c:586 msgid "cannot create RUNPATH/RPATH copy" msgstr "無法建立 RUNPATH/RPATH 的副本" #: elf/dl-load.c:680 msgid "cannot create search path array" msgstr "無法建立搜尋路徑陣列" #: elf/dl-load.c:885 msgid "cannot stat shared object" msgstr "無法 stat 共用目的檔" #: elf/dl-load.c:963 msgid "cannot open zero fill device" msgstr "無法開啟以零填滿的裝置" #: elf/dl-load.c:1010 elf/dl-load.c:2165 msgid "cannot create shared object descriptor" msgstr "無法建立共用目的檔敘述項" #: elf/dl-load.c:1029 elf/dl-load.c:1570 elf/dl-load.c:1682 msgid "cannot read file data" msgstr "無法讀取檔案資料" #: elf/dl-load.c:1069 msgid "ELF load command alignment not page-aligned" msgstr "ELF 載入命令對齊並沒有按照記憶體分頁 (page) 對齊" #: elf/dl-load.c:1076 msgid "ELF load command address/offset not properly aligned" msgstr "ELF 載入命令位址/位移並沒有適當地對齊" #: elf/dl-load.c:1160 msgid "cannot allocate TLS data structures for initial thread" msgstr "無法配置 TLS 資料結構用以起始執行緒" #: elf/dl-load.c:1183 msgid "cannot handle TLS data" msgstr "無法處理 TLS 資料" #: elf/dl-load.c:1202 msgid "object file has no loadable segments" msgstr "目的檔中沒有可載入的區段" #: elf/dl-load.c:1211 elf/dl-load.c:1662 msgid "cannot dynamically load executable" msgstr "無法動態載入執行檔" #: elf/dl-load.c:1232 msgid "object file has no dynamic section" msgstr "共用目的檔中沒有動態區段" #: elf/dl-load.c:1255 msgid "shared object cannot be dlopen()ed" msgstr "共用目的檔無法被 dlopen()" #: elf/dl-load.c:1268 msgid "cannot allocate memory for program header" msgstr "無法配置記憶體給程式標頭區使用" #: elf/dl-load.c:1284 elf/dl-open.c:195 msgid "invalid caller" msgstr "無效的呼叫者" #: elf/dl-load.c:1307 elf/dl-load.h:130 msgid "cannot change memory protections" msgstr "無法改變記憶體保護狀態" #: elf/dl-load.c:1327 msgid "cannot enable executable stack as shared object requires" msgstr "無法開啟可執行堆疊做為共用目的檔" #: elf/dl-load.c:1340 msgid "cannot close file descriptor" msgstr "無法關閉檔案描述符號" #: elf/dl-load.c:1570 msgid "file too short" msgstr "檔案太小" #: elf/dl-load.c:1605 msgid "invalid ELF header" msgstr "無效的 ELF 標頭" #: elf/dl-load.c:1617 msgid "ELF file data encoding not big-endian" msgstr "ELF 檔資料編碼並非大尾序" #: elf/dl-load.c:1619 msgid "ELF file data encoding not little-endian" msgstr "ELF 檔資料編碼並非小尾序" #: elf/dl-load.c:1623 msgid "ELF file version ident does not match current one" msgstr "ELF 檔版本 ident 不符合目前所使用的" #: elf/dl-load.c:1627 msgid "ELF file OS ABI invalid" msgstr "ELF 檔 OS ABI 版本不適用" #: elf/dl-load.c:1630 msgid "ELF file ABI version invalid" msgstr "ELF 檔 ABI 版本不適用" #: elf/dl-load.c:1633 msgid "nonzero padding in e_ident" msgstr "在 e_ident 中填補非零值" #: elf/dl-load.c:1636 msgid "internal error" msgstr "內部錯誤" #: elf/dl-load.c:1643 msgid "ELF file version does not match current one" msgstr "ELF 檔版本不符合目前的版本" #: elf/dl-load.c:1651 msgid "only ET_DYN and ET_EXEC can be loaded" msgstr "只有 ET_DYN 以及 ET_EXEC 可以載入" #: elf/dl-load.c:1667 msgid "ELF file's phentsize not the expected size" msgstr "ELF 檔的 phentsize 並不是預期中的大小" #: elf/dl-load.c:2184 msgid "wrong ELF class: ELFCLASS64" msgstr "錯誤 ELF 類別：ELFCLASS64" #: elf/dl-load.c:2185 msgid "wrong ELF class: ELFCLASS32" msgstr "錯誤 ELF 類別：ELFCLASS32" #: elf/dl-load.c:2188 msgid "cannot open shared object file" msgstr "無法開啟共用目的檔" #: elf/dl-load.h:128 msgid "failed to map segment from shared object" msgstr "從共用目的檔中對映區段失敗" #: elf/dl-load.h:132 msgid "cannot map zero-fill pages" msgstr "無法對應以零填滿的分頁區" #: elf/dl-lookup.c:791 msgid "relocation error" msgstr "重定址錯誤" #: elf/dl-lookup.c:818 msgid "symbol lookup error" msgstr "符號查找錯誤" #: elf/dl-open.c:102 msgid "cannot extend global scope" msgstr "無法延展全域變數的作用域" #: elf/dl-open.c:520 msgid "TLS generation counter wrapped! Please report this." msgstr "TLS 產生計數器被轉換執行！ 請報告這個情況。" #: elf/dl-open.c:542 msgid "cannot load any more object with static TLS" msgstr "無法以靜態 TLS 再載入任何物件" #: elf/dl-open.c:599 msgid "invalid mode for dlopen()" msgstr "無效的 dlopen() 模式" #: elf/dl-open.c:616 msgid "no more namespaces available for dlmopen()" msgstr "無更多命名空間可見於 dlmopen ()" #: elf/dl-open.c:634 msgid "invalid target namespace in dlmopen()" msgstr "dlmopen() 中的無效目標命名空間" #: elf/dl-reloc.c:120 msgid "cannot allocate memory in static TLS block" msgstr "無法在靜態 TLS 區塊中配置記憶體" #: elf/dl-reloc.c:212 msgid "cannot make segment writable for relocation" msgstr "在重新定址以後無法將區段設為可寫入狀態" #: elf/dl-reloc.c:275 #, c-format msgid "%s: no PLTREL found in object %s\n" msgstr "%s: 在目的檔 %s 中沒有找到 PLTREL\n" #: elf/dl-reloc.c:290 #, c-format msgid "%s: out of memory to store relocation results for %s\n" msgstr "%s: 記憶體不足以儲存重定址結果用於 %s\n" #: elf/dl-reloc.c:306 msgid "cannot restore segment prot after reloc" msgstr "在 reloc 之後無法復原 segment prot" #: elf/dl-reloc.c:335 msgid "cannot apply additional memory protection after relocation" msgstr "重定址之後無法套用額外記憶體保護" #: elf/dl-sym.c:153 msgid "RTLD_NEXT used in code not dynamically loaded" msgstr "程式碼所使用的 RTLD_NEXT 沒有動態載入" #: elf/dl-tls.c:933 msgid "cannot create TLS data structures" msgstr "無法建立 TLS 資料結構" #: elf/dl-version.c:166 msgid "version lookup error" msgstr "版本查找錯誤" #: elf/dl-version.c:296 msgid "cannot allocate version reference table" msgstr "無法配置版本參照表" #: elf/ldconfig.c:141 msgid "Print cache" msgstr "印出快取" #: elf/ldconfig.c:142 msgid "Generate verbose messages" msgstr "產生更多的訊息" #: elf/ldconfig.c:143 msgid "Don't build cache" msgstr "不建立快取" #: elf/ldconfig.c:144 msgid "Don't generate links" msgstr "不產生連結" #: elf/ldconfig.c:145 msgid "Change to and use ROOT as root directory" msgstr "變換到 ROOT 目錄並以它做為根目錄" #: elf/ldconfig.c:145 msgid "ROOT" msgstr "ROOT" #: elf/ldconfig.c:146 msgid "CACHE" msgstr "CACHE" #: elf/ldconfig.c:146 msgid "Use CACHE as cache file" msgstr "使用 CACHE 當作快取檔案" #: elf/ldconfig.c:147 msgid "CONF" msgstr "CONF" #: elf/ldconfig.c:147 msgid "Use CONF as configuration file" msgstr "使用 CONF 當作設定檔" #: elf/ldconfig.c:148 msgid "Only process directories specified on the command line. Don't build cache." msgstr "只處理在命令列引數中有指定的目錄，不建立快取檔案。" #: elf/ldconfig.c:149 msgid "Manually link individual libraries." msgstr "手動個別連結函式庫" #: elf/ldconfig.c:150 msgid "FORMAT" msgstr "FORMAT" #: elf/ldconfig.c:150 msgid "Format to use: new, old or compat (default)" msgstr "將使用格式: 新、舊或相容 (預設)" #: elf/ldconfig.c:151 msgid "Ignore auxiliary cache file" msgstr "忽略輔助設備快取檔案" #: elf/ldconfig.c:159 msgid "Configure Dynamic Linker Run Time Bindings." msgstr "設定執行時期動態連接" #: elf/ldconfig.c:346 #, c-format msgid "Path `%s' given more than once" msgstr "路徑 `%s' 使用超過一次" #: elf/ldconfig.c:386 #, c-format msgid "%s is not a known library type" msgstr "%s 不是一個已知的函式庫型態" #: elf/ldconfig.c:414 #, c-format msgid "Can't stat %s" msgstr "無法 stat %s" #: elf/ldconfig.c:488 #, c-format msgid "Can't stat %s\n" msgstr "無法 stat %s\n" #: elf/ldconfig.c:498 #, c-format msgid "%s is not a symbolic link\n" msgstr "%s 不是一個符號連接檔\n" #: elf/ldconfig.c:517 #, c-format msgid "Can't unlink %s" msgstr "無法取消連結 %s" #: elf/ldconfig.c:523 #, c-format msgid "Can't link %s to %s" msgstr "無法從 %s 連結到 %s" #: elf/ldconfig.c:529 msgid " (changed)\n" msgstr " (已改變)\n" #: elf/ldconfig.c:531 msgid " (SKIPPED)\n" msgstr " (已忽略)\n" #: elf/ldconfig.c:586 #, c-format msgid "Can't find %s" msgstr "找不到 %s" #: elf/ldconfig.c:602 elf/ldconfig.c:775 elf/ldconfig.c:834 elf/ldconfig.c:868 #, c-format msgid "Cannot lstat %s" msgstr "無法 lstat %s" #: elf/ldconfig.c:609 #, c-format msgid "Ignored file %s since it is not a regular file." msgstr "忽略檔案 %s 因為它不是一個正常的檔案。" #: elf/ldconfig.c:618 #, c-format msgid "No link created since soname could not be found for %s" msgstr "由於找不到 %s 的共用目的檔名稱，連結並未被建立" #: elf/ldconfig.c:701 #, c-format msgid "Can't open directory %s" msgstr "無法開啟目錄 %s" #: elf/ldconfig.c:793 elf/ldconfig.c:855 elf/readlib.c:90 #, c-format msgid "Input file %s not found.\n" msgstr "輸入檔 %s 找不到。\n" #: elf/ldconfig.c:800 #, c-format msgid "Cannot stat %s" msgstr "無法顯示狀態 %s" #: elf/ldconfig.c:951 #, c-format msgid "libc5 library %s in wrong directory" msgstr "libc5 函式庫 %s 擺錯目錄了" #: elf/ldconfig.c:954 #, c-format msgid "libc6 library %s in wrong directory" msgstr "libc6 函式庫 %s 擺錯目錄了" #: elf/ldconfig.c:957 #, c-format msgid "libc4 library %s in wrong directory" msgstr "libc4 函式庫 %s 擺錯目錄了" #: elf/ldconfig.c:985 #, c-format msgid "libraries %s and %s in directory %s have same soname but different type." msgstr "函式庫 %s 跟 %s (在目錄 %s 底下) 有共同的共用函式庫名稱，不過其格式卻不同" #: elf/ldconfig.c:1094 #, c-format msgid "Warning: ignoring configuration file that cannot be opened: %s" msgstr "警告：正在忽略無法開啟的組態檔案：%s" #: elf/ldconfig.c:1160 #, c-format msgid "%s:%u: bad syntax in hwcap line" msgstr "%s:%u: 在 hwcap 列中有不當的語法" #: elf/ldconfig.c:1166 #, c-format msgid "%s:%u: hwcap index %lu above maximum %u" msgstr "%s:%u: hwcap 索引 %lu 以上的最大值 %u" #: elf/ldconfig.c:1173 elf/ldconfig.c:1181 #, c-format msgid "%s:%u: hwcap index %lu already defined as %s" msgstr "%s:%u: hwcap 索引 %lu 已經被定義為 %s" #: elf/ldconfig.c:1184 #, c-format msgid "%s:%u: duplicate hwcap %lu %s" msgstr "%s:%u: 重製 hwcap %lu %s" #: elf/ldconfig.c:1206 #, c-format msgid "need absolute file name for configuration file when using -r" msgstr "需要絕對檔案名稱用於組態檔案時正在使用 -r" #: elf/ldconfig.c:1213 locale/programs/xmalloc.c:64 malloc/obstack.c:416 #: malloc/obstack.c:418 posix/getconf.c:441 posix/getconf.c:661 #, c-format msgid "memory exhausted" msgstr "記憶體耗盡" #: elf/ldconfig.c:1245 #, c-format msgid "%s:%u: cannot read directory %s" msgstr "%s:%u: 無法讀取目錄 %s" #: elf/ldconfig.c:1289 #, c-format msgid "relative path `%s' used to build cache" msgstr "用來建置快取的相對路徑 `%s'" #: elf/ldconfig.c:1319 #, c-format msgid "Can't chdir to /" msgstr "無法變更目錄到 /" #: elf/ldconfig.c:1360 #, c-format msgid "Can't open cache file directory %s\n" msgstr "無法開啟快取檔案目錄 %s\n" #: elf/ldd.bash.in:42 msgid "Written by %s and %s.\n" msgstr "由 %s 和 %s 編寫。\n" #: elf/ldd.bash.in:47 msgid "" "Usage: ldd [OPTION]... FILE...\n" " --help print this help and exit\n" " --version print version information and exit\n" " -d, --data-relocs process data relocations\n" " -r, --function-relocs process data and function relocations\n" " -u, --unused print unused direct dependencies\n" " -v, --verbose print all information\n" msgstr "" "用法：ldd [選項]… 檔案…\n" " --help 印出這份說明然後離開\n" " --version 印出版本資訊然後離開\n" " -d, --data-relocs 行程資料重定址\n" " -r, --function-relocs 行程資料和函式重定址\n" " -u, --unused 印出未使用的直接相依性\n" " -v, --verbose 印出所有資訊\n" #: elf/ldd.bash.in:80 msgid "ldd: option \\`$1' is ambiguous" msgstr "ldd：選項「$1」為模稜兩可的" #: elf/ldd.bash.in:87 msgid "unrecognized option" msgstr "無法辨識的選項" #: elf/ldd.bash.in:88 elf/ldd.bash.in:125 msgid "Try \\`ldd --help' for more information." msgstr "嘗試「ldd --help」以獲得更多資訊。" #: elf/ldd.bash.in:124 msgid "missing file arguments" msgstr "缺少檔案引數" #. TRANS No such file or directory. This is a ``file doesn't exist'' error #. TRANS for ordinary files that are referenced in contexts where they are #. TRANS expected to already exist. #: elf/ldd.bash.in:147 sysdeps/gnu/errlist.c:37 msgid "No such file or directory" msgstr "沒有此一檔案或目錄" #: elf/ldd.bash.in:150 inet/rcmd.c:488 msgid "not regular file" msgstr "並非正常的檔案" #: elf/ldd.bash.in:153 msgid "warning: you do not have execution permission for" msgstr "警告：您沒有執行權限用於" #: elf/ldd.bash.in:182 msgid "\tnot a dynamic executable" msgstr "\t不是動態可執行檔案" #: elf/ldd.bash.in:190 msgid "exited with unknown exit code" msgstr "離開的與不明的離開代碼" #: elf/ldd.bash.in:195 msgid "error: you do not have read permission for" msgstr "錯誤：您沒有讀取許可權用於" #: elf/pldd-xx.c:105 #, c-format msgid "cannot find program header of process" msgstr "找不到行程的程式標頭" #: elf/pldd-xx.c:110 #, c-format msgid "cannot read program header" msgstr "無法讀取程式標頭" #: elf/pldd-xx.c:135 #, c-format msgid "cannot read dynamic section" msgstr "無法讀取動態區段" #: elf/pldd-xx.c:147 #, c-format msgid "cannot read r_debug" msgstr "無法讀取 r_debug" #: elf/pldd-xx.c:167 #, c-format msgid "cannot read program interpreter" msgstr "無法讀取程式解譯器" #: elf/pldd-xx.c:196 #, c-format msgid "cannot read link map" msgstr "無法讀取鏈結映射" #: elf/pldd-xx.c:207 #, c-format msgid "cannot read object name" msgstr "無法讀取物件名稱" #: elf/pldd.c:63 msgid "List dynamic shared objects loaded into process." msgstr "列出已載入行程中的動態共用物件。" #: elf/pldd.c:67 msgid "PID" msgstr "行程識別號" #: elf/pldd.c:99 #, c-format msgid "Exactly one parameter with process ID required.\n" msgstr "需要剛好一個附有行程識別號的參數。\n" #: elf/pldd.c:111 #, c-format msgid "invalid process ID '%s'" msgstr "無效的行程識別號 %s" #: elf/pldd.c:119 #, c-format msgid "cannot open %s" msgstr "無法開啟 %s" #: elf/pldd.c:144 #, c-format msgid "cannot open %s/task" msgstr "無法開啟 %s/任務" #: elf/pldd.c:147 #, c-format msgid "cannot prepare reading %s/task" msgstr "無法準備讀取 %s/任務" #: elf/pldd.c:160 #, c-format msgid "invalid thread ID '%s'" msgstr "無效的執行緒識別號 %s" #: elf/pldd.c:171 #, c-format msgid "cannot attach to process %lu" msgstr "無法附加到行程 %lu" #: elf/pldd.c:286 #, c-format msgid "cannot get information about process %lu" msgstr "無法獲得行程 %lu 的相關資訊" #: elf/pldd.c:299 #, c-format msgid "process %lu is no ELF program" msgstr "行程 %lu 並非 ELF 程式" #: elf/readelflib.c:34 #, c-format msgid "file %s is truncated\n" msgstr "檔案 %s 已截短\n" #: elf/readelflib.c:66 #, c-format msgid "%s is a 32 bit ELF file.\n" msgstr "%s 是一個 32 位元的 ELF 檔案。\n" #: elf/readelflib.c:68 #, c-format msgid "%s is a 64 bit ELF file.\n" msgstr "%s 是一個 64 位元的 ELF 檔案。\n" #: elf/readelflib.c:70 #, c-format msgid "Unknown ELFCLASS in file %s.\n" msgstr "檔案 %s 中未知的 ELFCLASS。\n" #: elf/readelflib.c:77 #, c-format msgid "%s is not a shared object file (Type: %d).\n" msgstr "%s 不是一個共用目的檔 (型態: %d)。\n" #: elf/readelflib.c:108 #, c-format msgid "more than one dynamic segment\n" msgstr "超過一個的動態區段\n" #: elf/readlib.c:96 #, c-format msgid "Cannot fstat file %s.\n" msgstr "無法 fstat 檔案 %s。\n" #: elf/readlib.c:107 #, c-format msgid "File %s is empty, not checked." msgstr "檔案 %s 為空，不做檢查。" #: elf/readlib.c:113 #, c-format msgid "File %s is too small, not checked." msgstr "檔案 %s 太小，不做檢查。" #: elf/readlib.c:123 #, c-format msgid "Cannot mmap file %s.\n" msgstr "無法 mmap 檔案 %s。\n" #: elf/readlib.c:161 #, c-format msgid "%s is not an ELF file - it has the wrong magic bytes at the start.\n" msgstr "%s 不是一個 ELF 檔 - 其開頭的魔術位元組是錯的。\n" #: elf/sln.c:84 #, c-format msgid "" "Usage: sln src dest|file\n" "\n" msgstr "" "用法：sln 原始碼 目的|檔案\n" "\n" #: elf/sln.c:109 #, c-format msgid "%s: file open error: %m\n" msgstr "%s：檔案開啟錯誤：%m\n" #: elf/sln.c:146 #, c-format msgid "No target in line %d\n" msgstr "沒有目標於第 %d 列\n" #: elf/sln.c:178 #, c-format msgid "%s: destination must not be a directory\n" msgstr "%s：目的必須不是目錄\n" #: elf/sln.c:184 #, c-format msgid "%s: failed to remove the old destination\n" msgstr "%s：無法移除舊的目的\n" #: elf/sln.c:192 #, c-format msgid "%s: invalid destination: %s\n" msgstr "%s：無效的目的：%s\n" #: elf/sln.c:207 elf/sln.c:216 #, c-format msgid "Invalid link from \"%s\" to \"%s\": %s\n" msgstr "從「%s」到「%s」的鏈結無效：%s\n" #: elf/sotruss.sh:32 #, sh-format msgid "" "Usage: sotruss [OPTION...] [--] EXECUTABLE [EXECUTABLE-OPTION...]\n" " -F, --from FROMLIST Trace calls from objects on FROMLIST\n" " -T, --to TOLIST Trace calls to objects on TOLIST\n" "\n" " -e, --exit Also show exits from the function calls\n" " -f, --follow Trace child processes\n" " -o, --output FILENAME Write output to FILENAME (or FILENAME.$PID in case\n" "\t\t\t -f is also used) instead of standard error\n" "\n" " -?, --help Give this help list\n" " --usage Give a short usage message\n" " --version Print program version" msgstr "" "用法：sotruss [選項…] [--] 可執行檔案 [EXECUTABLE-OPTION...]\n" " -F, --from FROMLIST 追蹤來自 FROMLIST 上物件的呼叫\n" " -T, --to TOLIST 追蹤來自 TOLIST 上物件的呼叫\n" "\n" " -e, --exit 也顯示來自函式的離開呼叫\n" " -f, --follow 追蹤子行程\n" " -o, --output 檔名 將輸出寫入 FILENAME (當同時使用 -f 時\n" "\t\t\t 則使用 FILENAME.$PID) 以代替標準錯誤\n" "\n" " -?, --help 給出這份說明清單\n" " --usage 給出簡短用法訊息\n" " --version 印出程式版本" #: elf/sotruss.sh:46 msgid "Mandatory arguments to long options are also mandatory for any corresponding\\nshort options.\\n" msgstr "長選項的必要引數同樣也是相對應短選項的必要引數。" #: elf/sotruss.sh:55 msgid "%s: option requires an argument -- '%s'\\n" msgstr "%s：選項需要一個引數 --『%s』\\n" #: elf/sotruss.sh:61 msgid "%s: option is ambiguous; possibilities:" msgstr "%s：選項是模稜兩可的；可能是：" #: elf/sotruss.sh:79 msgid "Written by %s.\\n" msgstr "作者 %s。\\n" #: elf/sotruss.sh:86 msgid "" "Usage: %s [-ef] [-F FROMLIST] [-o FILENAME] [-T TOLIST] [--exit]\n" "\t [--follow] [--from FROMLIST] [--output FILENAME] [--to TOLIST]\n" "\t [--help] [--usage] [--version] [--]\n" "\t EXECUTABLE [EXECUTABLE-OPTION...]\\n" msgstr "" "用法：%s [-ef] [-F FROMLIST] [-o FILENAME] [-T TOLIST] [--exit]\n" "\t [--follow] [--from FROMLIST] [--output 檔名] [--to TOLIST]\n" "\t [--help] [--usage] [--version] [--]\n" "\t 可執行檔案 [EXECUTABLE-OPTION...]\\n" #: elf/sotruss.sh:134 msgid "%s: unrecognized option '%c%s'\\n" msgstr "%s：無法辨識的選項『%c%s』\\n" #: elf/sprof.c:77 msgid "Output selection:" msgstr "輸出選擇:" #: elf/sprof.c:79 msgid "print list of count paths and their number of use" msgstr "列出計數的路徑以及它們使用的次數" #: elf/sprof.c:81 msgid "generate flat profile with counts and ticks" msgstr "從執行次數與經歷時間的資料中產生直接的測速結果" #: elf/sprof.c:82 msgid "generate call graph" msgstr "產生函式呼叫圖形" #: elf/sprof.c:89 msgid "Read and display shared object profiling data." msgstr "讀取和顯示共用物件規範資料。" #: elf/sprof.c:94 msgid "SHOBJ [PROFDATA]" msgstr "SHOBJ [PROFDATA]" #: elf/sprof.c:433 #, c-format msgid "failed to load shared object `%s'" msgstr "開啟共用目的檔 `%s' 失敗" #: elf/sprof.c:442 #, c-format msgid "cannot create internal descriptors" msgstr "無法建立內部敘述項" #: elf/sprof.c:554 #, c-format msgid "Reopening shared object `%s' failed" msgstr "重新開啟共用目的檔 %s 失敗" #: elf/sprof.c:561 elf/sprof.c:656 #, c-format msgid "reading of section headers failed" msgstr "讀取小節標頭時失敗" #: elf/sprof.c:569 elf/sprof.c:664 #, c-format msgid "reading of section header string table failed" msgstr "讀取小節標頭字串表格時失敗" #: elf/sprof.c:595 #, c-format msgid "*** Cannot read debuginfo file name: %m\n" msgstr "*** 無法讀取除錯資訊檔案名稱：%m\n" #: elf/sprof.c:616 #, c-format msgid "cannot determine file name" msgstr "無法決定檔案名稱" #: elf/sprof.c:649 #, c-format msgid "reading of ELF header failed" msgstr "讀取 ELF 標頭時失敗" #: elf/sprof.c:685 #, c-format msgid "*** The file `%s' is stripped: no detailed analysis possible\n" msgstr "*** 檔案 `%s' 被裁剪了: 無法做詳細的分析\n" #: elf/sprof.c:715 #, c-format msgid "failed to load symbol data" msgstr "載入函式符號資料失敗" #: elf/sprof.c:780 #, c-format msgid "cannot load profiling data" msgstr "無法載入測試資料" #: elf/sprof.c:789 #, c-format msgid "while stat'ing profiling data file" msgstr "在對測試資料檔案進行統計的時候" #: elf/sprof.c:797 #, c-format msgid "profiling data file `%s' does not match shared object `%s'" msgstr "測試資料檔 `%s' 與共用目的檔 `%s' 不符合" #: elf/sprof.c:808 #, c-format msgid "failed to mmap the profiling data file" msgstr "測試資料檔案 mmap 失敗" #: elf/sprof.c:816 #, c-format msgid "error while closing the profiling data file" msgstr "正在關閉測試資料檔案時發生錯誤" #: elf/sprof.c:825 elf/sprof.c:923 #, c-format msgid "cannot create internal descriptor" msgstr "無法建立內部敘述項" #: elf/sprof.c:899 #, c-format msgid "`%s' is no correct profile data file for `%s'" msgstr "`%s' 不是 `%s' 中正確的測速評估資料檔" #: elf/sprof.c:1080 elf/sprof.c:1138 #, c-format msgid "cannot allocate symbol data" msgstr "無法配置函式符號資料" #: iconv/iconv_charmap.c:141 iconv/iconv_prog.c:448 #, c-format msgid "cannot open output file" msgstr "無法開啟輸出檔" #: iconv/iconv_charmap.c:187 iconv/iconv_prog.c:311 #, c-format msgid "error while closing input `%s'" msgstr "正在關閉輸入 `%s' 的時候發生錯誤" #: iconv/iconv_charmap.c:435 #, c-format msgid "illegal input sequence at position %Zd" msgstr "位置 %Zd 有不合法的輸入序列" #: iconv/iconv_charmap.c:454 iconv/iconv_prog.c:539 #, c-format msgid "incomplete character or shift sequence at end of buffer" msgstr "緩衝區結尾有不完全的字元或 shift sequence" #: iconv/iconv_charmap.c:499 iconv/iconv_charmap.c:535 iconv/iconv_prog.c:582 #: iconv/iconv_prog.c:618 #, c-format msgid "error while reading the input" msgstr "正在讀入資料的時候發生錯誤" #: iconv/iconv_charmap.c:517 iconv/iconv_prog.c:600 #, c-format msgid "unable to allocate buffer for input" msgstr "無法配置輸入用的緩衝區" #: iconv/iconv_prog.c:59 msgid "Input/Output format specification:" msgstr "輸入/輸出格式設定:" #: iconv/iconv_prog.c:60 msgid "encoding of original text" msgstr "原始文字的編碼" #: iconv/iconv_prog.c:61 msgid "encoding for output" msgstr "用來輸出的編碼" #: iconv/iconv_prog.c:62 msgid "Information:" msgstr "資料:" #: iconv/iconv_prog.c:63 msgid "list all known coded character sets" msgstr "列出所有已知的編碼字元集" #: iconv/iconv_prog.c:64 locale/programs/localedef.c:129 msgid "Output control:" msgstr "輸出控制:" #: iconv/iconv_prog.c:65 msgid "omit invalid characters from output" msgstr "省略無效字元的輸出" #: iconv/iconv_prog.c:66 iconv/iconvconfig.c:128 #: locale/programs/localedef.c:122 locale/programs/localedef.c:124 #: locale/programs/localedef.c:126 locale/programs/localedef.c:147 #: malloc/memusagestat.c:56 msgid "FILE" msgstr "檔案" #: iconv/iconv_prog.c:66 msgid "output file" msgstr "輸出檔案" #: iconv/iconv_prog.c:67 msgid "suppress warnings" msgstr "停止輸出警告訊息" #: iconv/iconv_prog.c:68 msgid "print progress information" msgstr "印出程序相關資訊" #: iconv/iconv_prog.c:73 msgid "Convert encoding of given files from one encoding to another." msgstr "從給定的檔案的字元編碼轉換到另一個" #: iconv/iconv_prog.c:77 msgid "[FILE...]" msgstr "[FILE…]" #: iconv/iconv_prog.c:233 #, c-format msgid "conversions from `%s' and to `%s' are not supported" msgstr "不支援從 `%s' 以及到 `%s' 的轉換" #: iconv/iconv_prog.c:238 #, c-format msgid "conversion from `%s' is not supported" msgstr "不支援從 `%s' 的轉換" #: iconv/iconv_prog.c:245 #, c-format msgid "conversion to `%s' is not supported" msgstr "不支援到 `%s' 的轉換" #: iconv/iconv_prog.c:249 #, c-format msgid "conversion from `%s' to `%s' is not supported" msgstr "不支援從 `%s' 到 `%s' 的轉換" #: iconv/iconv_prog.c:259 #, c-format msgid "failed to start conversion processing" msgstr "開始轉換程序失敗" #: iconv/iconv_prog.c:357 #, c-format msgid "error while closing output file" msgstr "正在關閉輸出檔案的時候發生錯誤" #: iconv/iconv_prog.c:458 #, c-format msgid "conversion stopped due to problem in writing the output" msgstr "因寫入輸出時發生錯誤而導致轉換停止" #: iconv/iconv_prog.c:535 #, c-format msgid "illegal input sequence at position %ld" msgstr "位置 %ld 有不合法的輸入序列" #: iconv/iconv_prog.c:543 #, c-format msgid "internal error (illegal descriptor)" msgstr "內部錯誤 (不合法的敘述項)" #: iconv/iconv_prog.c:546 #, c-format msgid "unknown iconv() error %d" msgstr "不明的 iconv() 錯誤 %d" #: iconv/iconv_prog.c:791 #, fuzzy #| msgid "" #| "The following list contain all the coded character sets known. This does\n" #| "not necessarily mean that all combinations of these names can be used for\n" #| "the FROM and TO command line parameters. One coded character set can be\n" #| "listed with several different names (aliases).\n" #| "\n" #| " " msgid "" "The following list contains all the coded character sets known. This does\n" "not necessarily mean that all combinations of these names can be used for\n" "the FROM and TO command line parameters. One coded character set can be\n" "listed with several different names (aliases).\n" "\n" " " msgstr "" "以下的列表包含所有已知的編碼字集，但這不代表所有的字集名稱組合皆可用於\n" "命令列的 \"來源\" 以及 \"目的\" 引數。一個編碼字集可以用幾個不同的名稱\n" "來表示 (即 \"匿名\")。\n" "\n" " " #: iconv/iconvconfig.c:109 msgid "Create fastloading iconv module configuration file." msgstr "建立快速載入 iconv 模組的設定檔案。" #: iconv/iconvconfig.c:113 msgid "[DIR...]" msgstr "[目錄…]" #: iconv/iconvconfig.c:126 locale/programs/localedef.c:133 msgid "PATH" msgstr "路徑" #: iconv/iconvconfig.c:127 msgid "Prefix used for all file accesses" msgstr "使用於所有檔案存取時的前置文字" #: iconv/iconvconfig.c:128 msgid "Put output in FILE instead of installed location (--prefix does not apply to FILE)" msgstr "在 FILE 中置放輸出以代替已安裝的位置 (--prefix 不套用到 FILE)" #: iconv/iconvconfig.c:132 msgid "Do not search standard directories, only those on the command line" msgstr "不搜尋標準目錄，只有那些在之上命令列" #: iconv/iconvconfig.c:299 #, c-format msgid "Directory arguments required when using --nostdlib" msgstr "目錄引數必要項時正在使用 --nostdlib" #: iconv/iconvconfig.c:341 locale/programs/localedef.c:294 #, c-format msgid "no output file produced because warnings were issued" msgstr "因為發出過警告訊息，所以沒有製造任何輸出檔" #: iconv/iconvconfig.c:430 #, c-format msgid "while inserting in search tree" msgstr "當插入於搜尋樹之中" #: iconv/iconvconfig.c:1239 #, c-format msgid "cannot generate output file" msgstr "無法產生輸出檔" #: inet/rcmd.c:163 msgid "rcmd: Cannot allocate memory\n" msgstr "rcmd: 無法配置記憶體\n" #: inet/rcmd.c:178 msgid "rcmd: socket: All ports in use\n" msgstr "rcmd: socket: 所有的埠都在使用中\n" #: inet/rcmd.c:206 #, c-format msgid "connect to address %s: " msgstr "連接到位址 %s: " #: inet/rcmd.c:219 #, c-format msgid "Trying %s...\n" msgstr "嘗試 %s…\n" #: inet/rcmd.c:255 #, c-format msgid "rcmd: write (setting up stderr): %m\n" msgstr "rcmd: write (正在設定標準錯誤輸出): %m\n" #: inet/rcmd.c:271 #, c-format msgid "rcmd: poll (setting up stderr): %m\n" msgstr "rcmd: poll (正在設定標準錯誤輸出): %m\n" #: inet/rcmd.c:274 msgid "poll: protocol failure in circuit setup\n" msgstr "poll: 通訊協定在設定線路時失效\n" #: inet/rcmd.c:306 msgid "socket: protocol failure in circuit setup\n" msgstr "socket: 通訊協定在設定線路時失效\n" #: inet/rcmd.c:330 #, c-format msgid "rcmd: %s: short read" msgstr "rcmd: %s: 讀入資料過短" #: inet/rcmd.c:486 msgid "lstat failed" msgstr "lstat 失敗" #: inet/rcmd.c:493 msgid "cannot open" msgstr "無法開啟" #: inet/rcmd.c:495 msgid "fstat failed" msgstr "fstat 失敗" #: inet/rcmd.c:497 msgid "bad owner" msgstr "錯誤的擁有者" #: inet/rcmd.c:499 msgid "writeable by other than owner" msgstr "使用者以外的人亦可寫入" #: inet/rcmd.c:501 msgid "hard linked somewhere" msgstr "被實體連結到某處" #: inet/ruserpass.c:170 inet/ruserpass.c:193 msgid "out of memory" msgstr "記憶體不足" #: inet/ruserpass.c:184 msgid "Error: .netrc file is readable by others." msgstr "錯誤: .netrc 檔可以被別人讀取" #: inet/ruserpass.c:185 msgid "Remove password or make file unreadable by others." msgstr "移除密碼或讓他人無法讀取檔案" #: inet/ruserpass.c:277 #, c-format msgid "Unknown .netrc keyword %s" msgstr "未知的 .netrc 關鍵字 %s" #: libidn/nfkc.c:463 msgid "Character out of range for UTF-8" msgstr "字元超出 UTF-8 範圍" #: locale/programs/charmap-dir.c:57 #, c-format msgid "cannot read character map directory `%s'" msgstr "無法讀取字集對照檔目錄 `%s'" #: locale/programs/charmap.c:138 #, c-format msgid "character map file `%s' not found" msgstr "找不到字集對照檔 `%s'" #: locale/programs/charmap.c:195 #, c-format msgid "default character map file `%s' not found" msgstr "找不到預設的字集對照檔 `%s'" #: locale/programs/charmap.c:258 #, c-format msgid "character map `%s' is not ASCII compatible, locale not ISO C compliant\n" msgstr "字元對應 `%s' 不是 ASCII 相容碼，區域化資料庫不符合 ISO C\n" #: locale/programs/charmap.c:337 #, c-format msgid "%s: must be greater than \n" msgstr "%s: 必須大於 \n" #: locale/programs/charmap.c:357 locale/programs/charmap.c:374 #: locale/programs/repertoire.c:174 #, c-format msgid "syntax error in prolog: %s" msgstr "prolog 中有語法錯誤: %s" #: locale/programs/charmap.c:358 msgid "invalid definition" msgstr "無效的定義" #: locale/programs/charmap.c:375 locale/programs/locfile.c:131 #: locale/programs/locfile.c:158 locale/programs/repertoire.c:175 msgid "bad argument" msgstr "錯誤的引數" #: locale/programs/charmap.c:403 #, c-format msgid "duplicate definition of <%s>" msgstr "<%s> 的定義重複了" #: locale/programs/charmap.c:410 #, c-format msgid "value for <%s> must be 1 or greater" msgstr "<%s> 的值必須為 1 或者更大" #: locale/programs/charmap.c:422 #, c-format msgid "value of <%s> must be greater or equal than the value of <%s>" msgstr "<%s> 的值必須等於或大於 <%s> 的值" #: locale/programs/charmap.c:445 locale/programs/repertoire.c:183 #, c-format msgid "argument to <%s> must be a single character" msgstr "給 <%s> 的引數必須是一個單字元" #: locale/programs/charmap.c:471 msgid "character sets with locking states are not supported" msgstr "不支援使用 locking 狀態的字元集" #: locale/programs/charmap.c:498 locale/programs/charmap.c:552 #: locale/programs/charmap.c:584 locale/programs/charmap.c:678 #: locale/programs/charmap.c:733 locale/programs/charmap.c:774 #: locale/programs/charmap.c:815 #, c-format msgid "syntax error in %s definition: %s" msgstr "定義 %s 的語法錯誤: %s" #: locale/programs/charmap.c:499 locale/programs/charmap.c:679 #: locale/programs/charmap.c:775 locale/programs/repertoire.c:230 msgid "no symbolic name given" msgstr "沒有給予符號名稱" #: locale/programs/charmap.c:553 msgid "invalid encoding given" msgstr "給予的編碼是無效的" #: locale/programs/charmap.c:562 msgid "too few bytes in character encoding" msgstr "字元定義中的位元組太少了" #: locale/programs/charmap.c:564 msgid "too many bytes in character encoding" msgstr "字元定義中的位元組太多了" #: locale/programs/charmap.c:586 locale/programs/charmap.c:734 #: locale/programs/charmap.c:817 locale/programs/repertoire.c:296 msgid "no symbolic name given for end of range" msgstr "沒有給此區的最後一個字元符號名稱" #: locale/programs/charmap.c:610 locale/programs/ld-address.c:528 #: locale/programs/ld-collate.c:2626 locale/programs/ld-collate.c:3784 #: locale/programs/ld-ctype.c:2162 locale/programs/ld-ctype.c:2913 #: locale/programs/ld-identification.c:368 #: locale/programs/ld-measurement.c:215 locale/programs/ld-messages.c:298 #: locale/programs/ld-monetary.c:740 locale/programs/ld-name.c:264 #: locale/programs/ld-numeric.c:326 locale/programs/ld-paper.c:214 #: locale/programs/ld-telephone.c:278 locale/programs/ld-time.c:943 #: locale/programs/repertoire.c:313 #, c-format msgid "%1$s: definition does not end with `END %1$s'" msgstr "%1$s: 定義並沒有以 `END %1$s' 做為結束" #: locale/programs/charmap.c:643 msgid "only WIDTH definitions are allowed to follow the CHARMAP definition" msgstr "只有 WIDTH 定義才能直接寫在 CHARMAP 定義之後" #: locale/programs/charmap.c:651 locale/programs/charmap.c:714 #, c-format msgid "value for %s must be an integer" msgstr "%s 的值必須是整數才行" #: locale/programs/charmap.c:842 #, c-format msgid "%s: error in state machine" msgstr "%s: 狀態機錯誤" #: locale/programs/charmap.c:850 locale/programs/ld-address.c:544 #: locale/programs/ld-collate.c:2623 locale/programs/ld-collate.c:3977 #: locale/programs/ld-ctype.c:2159 locale/programs/ld-ctype.c:2930 #: locale/programs/ld-identification.c:384 #: locale/programs/ld-measurement.c:231 locale/programs/ld-messages.c:314 #: locale/programs/ld-monetary.c:756 locale/programs/ld-name.c:280 #: locale/programs/ld-numeric.c:342 locale/programs/ld-paper.c:230 #: locale/programs/ld-telephone.c:294 locale/programs/ld-time.c:959 #: locale/programs/locfile.c:1000 locale/programs/repertoire.c:324 #, c-format msgid "%s: premature end of file" msgstr "%s: 未完成已達檔案的末尾" #: locale/programs/charmap.c:869 locale/programs/charmap.c:880 #, c-format msgid "unknown character `%s'" msgstr "不明的字元 `%s'" #: locale/programs/charmap.c:888 #, c-format msgid "number of bytes for byte sequence of beginning and end of range not the same: %d vs %d" msgstr "在範圍起始與結束的位元組序列中，位元組的數目並不一致: %d vs %d" #: locale/programs/charmap.c:993 locale/programs/ld-collate.c:2903 #: locale/programs/repertoire.c:419 msgid "invalid names for character range" msgstr "無效的字元範圍名稱" #: locale/programs/charmap.c:1005 locale/programs/repertoire.c:431 msgid "hexadecimal range format should use only capital characters" msgstr "在表示十六進位的範圍時只能用大寫的英文字母表示" #: locale/programs/charmap.c:1023 locale/programs/repertoire.c:449 #, c-format msgid "<%s> and <%s> are invalid names for range" msgstr "<%s> 以及 <%s> 是不適用的範圍名稱" #: locale/programs/charmap.c:1029 locale/programs/repertoire.c:456 msgid "upper limit in range is smaller than lower limit" msgstr "範圍中上限小於下限" #: locale/programs/charmap.c:1087 msgid "resulting bytes for range not representable." msgstr "用來定義範圍的位元組無法被表述出來" #: locale/programs/ld-address.c:135 locale/programs/ld-collate.c:1565 #: locale/programs/ld-ctype.c:465 locale/programs/ld-identification.c:133 #: locale/programs/ld-measurement.c:94 locale/programs/ld-messages.c:97 #: locale/programs/ld-monetary.c:193 locale/programs/ld-name.c:94 #: locale/programs/ld-numeric.c:98 locale/programs/ld-paper.c:91 #: locale/programs/ld-telephone.c:94 locale/programs/ld-time.c:159 #, c-format msgid "No definition for %s category found" msgstr "找不到 %s 類別的定義" #: locale/programs/ld-address.c:146 locale/programs/ld-address.c:184 #: locale/programs/ld-address.c:202 locale/programs/ld-address.c:231 #: locale/programs/ld-address.c:303 locale/programs/ld-address.c:322 #: locale/programs/ld-address.c:335 locale/programs/ld-identification.c:146 #: locale/programs/ld-measurement.c:105 locale/programs/ld-monetary.c:205 #: locale/programs/ld-monetary.c:249 locale/programs/ld-monetary.c:265 #: locale/programs/ld-monetary.c:277 locale/programs/ld-name.c:105 #: locale/programs/ld-name.c:142 locale/programs/ld-numeric.c:112 #: locale/programs/ld-numeric.c:126 locale/programs/ld-paper.c:102 #: locale/programs/ld-paper.c:111 locale/programs/ld-telephone.c:105 #: locale/programs/ld-telephone.c:162 locale/programs/ld-time.c:175 #: locale/programs/ld-time.c:196 #, c-format msgid "%s: field `%s' not defined" msgstr "%s: 欄位 `%s' 沒有定義" #: locale/programs/ld-address.c:158 locale/programs/ld-address.c:210 #: locale/programs/ld-address.c:240 locale/programs/ld-address.c:278 #: locale/programs/ld-name.c:117 locale/programs/ld-telephone.c:117 #, c-format msgid "%s: field `%s' must not be empty" msgstr "%s: 欄位 `%s' 不可以空白" #: locale/programs/ld-address.c:170 #, c-format msgid "%s: invalid escape `%%%c' sequence in field `%s'" msgstr "%s: 不適用的跳脫序列 `%%%c', 在欄位 `%s' 中" #: locale/programs/ld-address.c:221 #, c-format msgid "%s: terminology language code `%s' not defined" msgstr "%s: 術語語言編碼 `%s' 未定義" #: locale/programs/ld-address.c:246 #, c-format msgid "%s: field `%s' must not be defined" msgstr "%s: 欄位「%s」必須未被定義" #: locale/programs/ld-address.c:260 locale/programs/ld-address.c:289 #, c-format msgid "%s: language abbreviation `%s' not defined" msgstr "%s: 語言縮寫 `%s' 沒有定義" #: locale/programs/ld-address.c:267 locale/programs/ld-address.c:295 #: locale/programs/ld-address.c:329 locale/programs/ld-address.c:341 #, c-format msgid "%s: `%s' value does not match `%s' value" msgstr "%s: `%s' 值與 `%s' 值不符合" #: locale/programs/ld-address.c:314 #, c-format msgid "%s: numeric country code `%d' not valid" msgstr "%s: 國家數字代碼 `%d' 錯誤" #: locale/programs/ld-address.c:436 locale/programs/ld-address.c:473 #: locale/programs/ld-address.c:511 locale/programs/ld-ctype.c:2537 #: locale/programs/ld-identification.c:280 #: locale/programs/ld-measurement.c:198 locale/programs/ld-messages.c:267 #: locale/programs/ld-monetary.c:495 locale/programs/ld-monetary.c:530 #: locale/programs/ld-monetary.c:571 locale/programs/ld-name.c:237 #: locale/programs/ld-numeric.c:218 locale/programs/ld-paper.c:197 #: locale/programs/ld-telephone.c:253 locale/programs/ld-time.c:848 #: locale/programs/ld-time.c:890 #, c-format msgid "%s: field `%s' declared more than once" msgstr "%s: `%s' 欄位不只一次地宣告" #: locale/programs/ld-address.c:440 locale/programs/ld-address.c:478 #: locale/programs/ld-identification.c:284 locale/programs/ld-messages.c:277 #: locale/programs/ld-monetary.c:499 locale/programs/ld-monetary.c:534 #: locale/programs/ld-name.c:241 locale/programs/ld-numeric.c:222 #: locale/programs/ld-telephone.c:257 locale/programs/ld-time.c:742 #: locale/programs/ld-time.c:811 locale/programs/ld-time.c:853 #, c-format msgid "%s: unknown character in field `%s'" msgstr "%s: 未知的字元在欄位 `%s' 中" #: locale/programs/ld-address.c:525 locale/programs/ld-collate.c:3782 #: locale/programs/ld-ctype.c:2910 locale/programs/ld-identification.c:365 #: locale/programs/ld-measurement.c:212 locale/programs/ld-messages.c:296 #: locale/programs/ld-monetary.c:738 locale/programs/ld-name.c:262 #: locale/programs/ld-numeric.c:324 locale/programs/ld-paper.c:212 #: locale/programs/ld-telephone.c:276 locale/programs/ld-time.c:941 #, c-format msgid "%s: incomplete `END' line" msgstr "%s: 不完整的 `END' 列" #: locale/programs/ld-address.c:535 locale/programs/ld-collate.c:551 #: locale/programs/ld-collate.c:603 locale/programs/ld-collate.c:899 #: locale/programs/ld-collate.c:912 locale/programs/ld-collate.c:2592 #: locale/programs/ld-collate.c:2613 locale/programs/ld-collate.c:3967 #: locale/programs/ld-ctype.c:1891 locale/programs/ld-ctype.c:2149 #: locale/programs/ld-ctype.c:2735 locale/programs/ld-ctype.c:2921 #: locale/programs/ld-identification.c:375 #: locale/programs/ld-measurement.c:222 locale/programs/ld-messages.c:305 #: locale/programs/ld-monetary.c:747 locale/programs/ld-name.c:271 #: locale/programs/ld-numeric.c:333 locale/programs/ld-paper.c:221 #: locale/programs/ld-telephone.c:285 locale/programs/ld-time.c:950 #, c-format msgid "%s: syntax error" msgstr "%s: 語法錯誤" #: locale/programs/ld-collate.c:426 #, c-format msgid "`%.*s' already defined in charmap" msgstr "`%.*s' 在字集對照表中已經定義過了" #: locale/programs/ld-collate.c:435 #, c-format msgid "`%.*s' already defined in repertoire" msgstr "`%.*s' 在編碼對映檔中已經被定義過了" #: locale/programs/ld-collate.c:442 #, c-format msgid "`%.*s' already defined as collating symbol" msgstr "`%.*s' 已被定義為對照符號" #: locale/programs/ld-collate.c:449 #, c-format msgid "`%.*s' already defined as collating element" msgstr "`%.*s' 已被定義為對照元素" #: locale/programs/ld-collate.c:480 locale/programs/ld-collate.c:506 #, c-format msgid "%s: `forward' and `backward' are mutually excluding each other" msgstr "%s: `forward' 以及 `backward' 彼此互相排斥" #: locale/programs/ld-collate.c:490 locale/programs/ld-collate.c:516 #: locale/programs/ld-collate.c:532 #, c-format msgid "%s: `%s' mentioned more than once in definition of weight %d" msgstr "%s: `%s' 不只一次地在權重 %d 中被提到" #: locale/programs/ld-collate.c:588 #, c-format msgid "%s: too many rules; first entry only had %d" msgstr "%s: 太多規則；第一個項目只包含 %d" #: locale/programs/ld-collate.c:624 #, c-format msgid "%s: not enough sorting rules" msgstr "%s: 排序規則不足" #: locale/programs/ld-collate.c:789 #, c-format msgid "%s: empty weight string not allowed" msgstr "%s: 空白的權重字串是不允許的" #: locale/programs/ld-collate.c:884 #, c-format msgid "%s: weights must use the same ellipsis symbol as the name" msgstr "%s: 權重必須使用與名稱相同的省略符號" #: locale/programs/ld-collate.c:940 #, c-format msgid "%s: too many values" msgstr "%s: 太多變數值" #: locale/programs/ld-collate.c:1060 locale/programs/ld-collate.c:1235 #, c-format msgid "order for `%.*s' already defined at %s:%Zu" msgstr "`%.*s' 的順序已經在 %s:%Zu 裡面定義了" #: locale/programs/ld-collate.c:1110 #, c-format msgid "%s: the start and the end symbol of a range must stand for characters" msgstr "%s: 啟始與結束符號範圍必須代表字元" #: locale/programs/ld-collate.c:1137 #, c-format msgid "%s: byte sequences of first and last character must have the same length" msgstr "%s: 第一個與最後一個字元的位元組序列必須有相同的長度" #: locale/programs/ld-collate.c:1179 #, c-format msgid "%s: byte sequence of first character of range is not lower than that of the last character" msgstr "%s: 範圍首字元的位元組序列沒有低於末字元的位元組序列" #: locale/programs/ld-collate.c:1304 #, c-format msgid "%s: symbolic range ellipsis must not directly follow `order_start'" msgstr "%s: 符號範圍的省略不可以直接在 `order_start' 之後" #: locale/programs/ld-collate.c:1308 #, c-format msgid "%s: symbolic range ellipsis must not be directly followed by `order_end'" msgstr "%s: 符號範圍的省略不可以直接在 `order_end' 之前" #: locale/programs/ld-collate.c:1328 locale/programs/ld-ctype.c:1408 #, c-format msgid "`%s' and `%.*s' are not valid names for symbolic range" msgstr "`%s' 和 `%.*s' 皆非符號範圍中適用的名稱" #: locale/programs/ld-collate.c:1378 locale/programs/ld-collate.c:3718 #, c-format msgid "%s: order for `%.*s' already defined at %s:%Zu" msgstr "%s: `%.*s' 的順序已在 %s:%Zu 中定義" #: locale/programs/ld-collate.c:1387 #, c-format msgid "%s: `%s' must be a character" msgstr "%s: `%s' 必須是一個字元" #: locale/programs/ld-collate.c:1582 #, c-format msgid "%s: `position' must be used for a specific level in all sections or none" msgstr "%s: `position' 必須在所有區塊裡特定的等級中使用，否則不能使用" #: locale/programs/ld-collate.c:1607 #, c-format msgid "symbol `%s' not defined" msgstr "並未定義 `%s' 符號" #: locale/programs/ld-collate.c:1683 locale/programs/ld-collate.c:1789 #, c-format msgid "symbol `%s' has the same encoding as" msgstr "跟符號 `%s' 有相同的編碼: " #: locale/programs/ld-collate.c:1687 locale/programs/ld-collate.c:1793 #, c-format msgid "symbol `%s'" msgstr "符號 `%s'" #: locale/programs/ld-collate.c:1833 #, c-format msgid "no definition of `UNDEFINED'" msgstr "沒有找到 `UNDEFINED' 的定義" #: locale/programs/ld-collate.c:1862 #, c-format msgid "too many errors; giving up" msgstr "發生太多錯誤；放棄中" #: locale/programs/ld-collate.c:2518 locale/programs/ld-collate.c:3906 #, c-format msgid "%s: nested conditionals not supported" msgstr "%s: 不支援巢狀條件" #: locale/programs/ld-collate.c:2536 #, fuzzy, c-format #| msgid "%s: more then one 'else'" msgid "%s: more than one 'else'" msgstr "%s: 使用多於一個「else」" #: locale/programs/ld-collate.c:2711 #, c-format msgid "%s: duplicate definition of `%s'" msgstr "%s: 重複的定義 `%s'" #: locale/programs/ld-collate.c:2747 #, c-format msgid "%s: duplicate declaration of section `%s'" msgstr "%s: 重複的 `%s' 區塊宣告" #: locale/programs/ld-collate.c:2883 #, c-format msgid "%s: unknown character in collating symbol name" msgstr "%s: 未知的字元在對照符號名稱中" #: locale/programs/ld-collate.c:3012 #, c-format msgid "%s: unknown character in equivalent definition name" msgstr "%s: 未知的字元在同義定義名稱中" #: locale/programs/ld-collate.c:3023 #, c-format msgid "%s: unknown character in equivalent definition value" msgstr "%s: 未知的字元在同義定義值中" #: locale/programs/ld-collate.c:3033 #, c-format msgid "%s: unknown symbol `%s' in equivalent definition" msgstr "%s: 未知的符號 `%s' 在同義定義中" #: locale/programs/ld-collate.c:3042 msgid "error while adding equivalent collating symbol" msgstr "正在加入同義對照符號時發生錯誤" #: locale/programs/ld-collate.c:3080 #, c-format msgid "duplicate definition of script `%s'" msgstr "敘述 `%s' 的定義重複了" #: locale/programs/ld-collate.c:3128 #, c-format msgid "%s: unknown section name `%.*s'" msgstr "%s: 不明的節段名稱「%.*s」" #: locale/programs/ld-collate.c:3157 #, c-format msgid "%s: multiple order definitions for section `%s'" msgstr "%s: `%s' 區塊中有多個順序定義" #: locale/programs/ld-collate.c:3185 #, c-format msgid "%s: invalid number of sorting rules" msgstr "%s: 不適用的排序規則數目" #: locale/programs/ld-collate.c:3212 #, c-format msgid "%s: multiple order definitions for unnamed section" msgstr "%s: 未命名的區塊中有多個順序定義" #: locale/programs/ld-collate.c:3267 locale/programs/ld-collate.c:3397 #: locale/programs/ld-collate.c:3760 #, c-format msgid "%s: missing `order_end' keyword" msgstr "%s: 缺少 `order_end' 關鍵字" #: locale/programs/ld-collate.c:3330 #, c-format msgid "%s: order for collating symbol %.*s not yet defined" msgstr "%s: 對照符號 %.*s 的順序尚未定義" #: locale/programs/ld-collate.c:3348 #, c-format msgid "%s: order for collating element %.*s not yet defined" msgstr "%s: 對照元素 %.*s 的順序尚未定義" #: locale/programs/ld-collate.c:3359 #, c-format msgid "%s: cannot reorder after %.*s: symbol not known" msgstr "%s: 無法重新排列在 %.*s 之後: 未知的符號" #: locale/programs/ld-collate.c:3411 locale/programs/ld-collate.c:3772 #, c-format msgid "%s: missing `reorder-end' keyword" msgstr "%s: 缺少 `reorder-end' 關鍵字" #: locale/programs/ld-collate.c:3445 locale/programs/ld-collate.c:3643 #, c-format msgid "%s: section `%.*s' not known" msgstr "%s: 未知的區塊 `%.*s'" #: locale/programs/ld-collate.c:3510 #, c-format msgid "%s: bad symbol <%.*s>" msgstr "%s: 不當的符號 <%.*s>" #: locale/programs/ld-collate.c:3706 #, c-format msgid "%s: cannot have `%s' as end of ellipsis range" msgstr "%s: 無法用 `%s' 做為省略區段的結尾" #: locale/programs/ld-collate.c:3756 #, c-format msgid "%s: empty category description not allowed" msgstr "%s: 空白的類別描述是不允許的" #: locale/programs/ld-collate.c:3775 #, c-format msgid "%s: missing `reorder-sections-end' keyword" msgstr "%s: 缺少 `reorder-sections-end' 關鍵字" #: locale/programs/ld-collate.c:3939 #, c-format msgid "%s: '%s' without matching 'ifdef' or 'ifndef'" msgstr "%s:「%s」而不需吻合中「ifdef」或「ifndef」" #: locale/programs/ld-collate.c:3957 #, c-format msgid "%s: 'endif' without matching 'ifdef' or 'ifndef'" msgstr "%s:「endif」而不需吻合中「ifdef」或「ifndef」" #: locale/programs/ld-ctype.c:484 #, c-format msgid "No character set name specified in charmap" msgstr "在字元對應 (charmap) 中沒有設定字集名稱" #: locale/programs/ld-ctype.c:513 #, c-format msgid "character L'\\u%0*x' in class `%s' must be in class `%s'" msgstr "character L'\\u%0*x' (放在類別 `%s' 之中) 必須在類別 `%s' 裡面" #: locale/programs/ld-ctype.c:528 #, c-format msgid "character L'\\u%0*x' in class `%s' must not be in class `%s'" msgstr "character L'\\u%0*x' (放在類別 `%s' 之中) 不能在類別 `%s' 裡面" #: locale/programs/ld-ctype.c:542 locale/programs/ld-ctype.c:600 #, c-format msgid "internal error in %s, line %u" msgstr "%s 的第 %u 列發生內部錯誤" #: locale/programs/ld-ctype.c:571 #, c-format msgid "character '%s' in class `%s' must be in class `%s'" msgstr "字元 '%s' (放在類別 `%s' 之中) 必須在類別 `%s' 裡面" #: locale/programs/ld-ctype.c:587 #, c-format msgid "character '%s' in class `%s' must not be in class `%s'" msgstr "字元 '%s' (放在類別 `%s' 之中) 不能在類別 `%s' 裡面" #: locale/programs/ld-ctype.c:617 locale/programs/ld-ctype.c:655 #, c-format msgid " character not in class `%s'" msgstr " 字元不在類別 `%s' 中" #: locale/programs/ld-ctype.c:629 locale/programs/ld-ctype.c:666 #, c-format msgid " character must not be in class `%s'" msgstr " 字元不可以在類別 `%s' 中" #: locale/programs/ld-ctype.c:644 #, c-format msgid "character not defined in character map" msgstr "字元 在字集對照檔中沒有定義" #: locale/programs/ld-ctype.c:780 #, c-format msgid "`digit' category has not entries in groups of ten" msgstr "`digit' 類別在群組 \"十\" 中沒有項目" #: locale/programs/ld-ctype.c:829 #, c-format msgid "no input digits defined and none of the standard names in the charmap" msgstr "沒有定義輸入數字，在字集對照檔中也找不到相符的標準名稱" #: locale/programs/ld-ctype.c:894 #, c-format msgid "not all characters used in `outdigit' are available in the charmap" msgstr "在字集對照表中無法找到某些在 `outdigit' 中用到的字元" #: locale/programs/ld-ctype.c:911 #, c-format msgid "not all characters used in `outdigit' are available in the repertoire" msgstr "在編碼對映檔中無法找到某些在 `outdigit' 中用到的字元" #: locale/programs/ld-ctype.c:1176 #, c-format msgid "character class `%s' already defined" msgstr "字元類別 `%s' 已經定義過了" #: locale/programs/ld-ctype.c:1182 #, c-format msgid "implementation limit: no more than %Zd character classes allowed" msgstr "程式實作的限制: 不能使用超過 %Zd 個字集類別" #: locale/programs/ld-ctype.c:1208 #, c-format msgid "character map `%s' already defined" msgstr "字集對照檔 `%s' 已經定義過了" #: locale/programs/ld-ctype.c:1214 #, c-format msgid "implementation limit: no more than %d character maps allowed" msgstr "程式實作的限制: 不能使用超過 %d 個字集對照檔" #: locale/programs/ld-ctype.c:1479 locale/programs/ld-ctype.c:1604 #: locale/programs/ld-ctype.c:1710 locale/programs/ld-ctype.c:2400 #: locale/programs/ld-ctype.c:3397 #, c-format msgid "%s: field `%s' does not contain exactly ten entries" msgstr "%s: `%s' 欄位沒有精確包含十個項目" #: locale/programs/ld-ctype.c:1507 locale/programs/ld-ctype.c:2081 #, c-format msgid "to-value of range is smaller than from-value " msgstr "區域定義的結尾值 比起始值 還要小" #: locale/programs/ld-ctype.c:1634 msgid "start and end character sequence of range must have the same length" msgstr "從起始到結束之間的字元序列長度跟編碼範圍必須相同" #: locale/programs/ld-ctype.c:1641 msgid "to-value character sequence is smaller than from-value sequence" msgstr "字元序列定義的結尾值比起始值還要小" #: locale/programs/ld-ctype.c:2001 locale/programs/ld-ctype.c:2052 msgid "premature end of `translit_ignore' definition" msgstr "`translit_ignore' 定義沒有按時結束" #: locale/programs/ld-ctype.c:2007 locale/programs/ld-ctype.c:2058 #: locale/programs/ld-ctype.c:2100 msgid "syntax error" msgstr "語法錯誤" #: locale/programs/ld-ctype.c:2233 #, c-format msgid "%s: syntax error in definition of new character class" msgstr "%s: 在定義新字元類別時語法錯誤" #: locale/programs/ld-ctype.c:2248 #, c-format msgid "%s: syntax error in definition of new character map" msgstr "%s: 在定義新字元對應時語法錯誤" #: locale/programs/ld-ctype.c:2422 msgid "ellipsis range must be marked by two operands of same type" msgstr "省略區域必須用兩個型別相同的運算元標示出來" #: locale/programs/ld-ctype.c:2431 msgid "with symbolic name range values the absolute ellipsis `...' must not be used" msgstr "用符號名稱來指定字元編碼範圍時不可以用絕對位置的省略符號 `…'" #: locale/programs/ld-ctype.c:2446 msgid "with UCS range values one must use the hexadecimal symbolic ellipsis `..'" msgstr "用來指定 UCS 值的範圍時得用十六進位表示的省略符號 `..'" #: locale/programs/ld-ctype.c:2460 msgid "with character code range values one must use the absolute ellipsis `...'" msgstr "用來指定字元編碼值的範圍時得用絕對位置的省略符號 `…'" #: locale/programs/ld-ctype.c:2611 #, c-format msgid "duplicated definition for mapping `%s'" msgstr "對映 `%s' 的定義重複了" #: locale/programs/ld-ctype.c:2697 locale/programs/ld-ctype.c:2841 #, c-format msgid "%s: `translit_start' section does not end with `translit_end'" msgstr "%s: `translit_start' 小節並沒有以 `translit_end' 做為結束" #: locale/programs/ld-ctype.c:2792 #, c-format msgid "%s: duplicate `default_missing' definition" msgstr "%s: 重複的 `default_missing' 定義" #: locale/programs/ld-ctype.c:2797 msgid "previous definition was here" msgstr "先前的設定在此" #: locale/programs/ld-ctype.c:2819 #, c-format msgid "%s: no representable `default_missing' definition found" msgstr "%s: 找不到可表示為 `default_missing' 的定義" #: locale/programs/ld-ctype.c:2962 locale/programs/ld-ctype.c:3059 #: locale/programs/ld-ctype.c:3079 locale/programs/ld-ctype.c:3100 #: locale/programs/ld-ctype.c:3121 locale/programs/ld-ctype.c:3142 #: locale/programs/ld-ctype.c:3163 locale/programs/ld-ctype.c:3203 #: locale/programs/ld-ctype.c:3224 locale/programs/ld-ctype.c:3289 #: locale/programs/ld-ctype.c:3331 locale/programs/ld-ctype.c:3356 #, c-format msgid "%s: character `%s' not defined while needed as default value" msgstr "%s: 字元 `%s' 沒有定義，但它是必需的預設值" #: locale/programs/ld-ctype.c:2967 locale/programs/ld-ctype.c:3064 #: locale/programs/ld-ctype.c:3084 locale/programs/ld-ctype.c:3105 #: locale/programs/ld-ctype.c:3126 locale/programs/ld-ctype.c:3147 #: locale/programs/ld-ctype.c:3168 locale/programs/ld-ctype.c:3208 #: locale/programs/ld-ctype.c:3229 locale/programs/ld-ctype.c:3294 #, c-format msgid "%s: character `%s' in charmap not representable with one byte" msgstr "%s: 字集對照表中的字元 `%s' 無法表示為單一位元組" #: locale/programs/ld-ctype.c:3338 locale/programs/ld-ctype.c:3363 #, c-format msgid "%s: character `%s' needed as default value not representable with one byte" msgstr "%s: 做為預設值所需的字元 `%s' 無法表示為單一位元組" #: locale/programs/ld-ctype.c:3419 #, c-format msgid "no output digits defined and none of the standard names in the charmap" msgstr "沒有定義輸出數字，在字集對照檔中也找不到相符的標準名稱" #: locale/programs/ld-ctype.c:3668 #, c-format msgid "%s: transliteration data from locale `%s' not available" msgstr "%s: 語區資料`%s' 的音譯資料不存在" #: locale/programs/ld-ctype.c:3768 #, c-format msgid "%s: table for class \"%s\": %lu bytes\n" msgstr "%s: 類別 \"%s\" 表格: %lu 位元組\n" #: locale/programs/ld-ctype.c:3833 #, c-format msgid "%s: table for map \"%s\": %lu bytes\n" msgstr "%s: 對映表 \"%s\" 表格: %lu 位元組\n" #: locale/programs/ld-ctype.c:3958 #, c-format msgid "%s: table for width: %lu bytes\n" msgstr "%s: 寬度表格: %lu 位元組\n" #: locale/programs/ld-identification.c:170 #, c-format msgid "%s: no identification for category `%s'" msgstr "%s: 類別 `%s' 沒有認證" #: locale/programs/ld-identification.c:351 #, c-format msgid "%s: duplicate category version definition" msgstr "%s: 重複的類別版本定義" #: locale/programs/ld-measurement.c:113 #, c-format msgid "%s: invalid value for field `%s'" msgstr "%s: 在欄位 `%s' 中的值不適用" #: locale/programs/ld-messages.c:114 locale/programs/ld-messages.c:148 #, c-format msgid "%s: field `%s' undefined" msgstr "%s: 欄位 `%s' 沒有定義" #: locale/programs/ld-messages.c:121 locale/programs/ld-messages.c:155 #: locale/programs/ld-monetary.c:255 locale/programs/ld-numeric.c:118 #, c-format msgid "%s: value for field `%s' must not be an empty string" msgstr "%s: 欄位 `%s' 值不可以是空字串" #: locale/programs/ld-messages.c:137 locale/programs/ld-messages.c:171 #, c-format msgid "%s: no correct regular expression for field `%s': %s" msgstr "%s: 沒有給欄位 `%s' 正確的常規表示式： %s" #: locale/programs/ld-monetary.c:223 #, c-format msgid "%s: value of field `int_curr_symbol' has wrong length" msgstr "%s: 欄位 `int_curr_symbol' 值的長度錯誤" #: locale/programs/ld-monetary.c:236 #, c-format msgid "%s: value of field `int_curr_symbol' does not correspond to a valid name in ISO 4217" msgstr "%s: 欄位 `int_curr_symbol' 值並不是 ISO 4217 中合法的名稱" #: locale/programs/ld-monetary.c:284 locale/programs/ld-monetary.c:314 #, c-format msgid "%s: value for field `%s' must be in range %d...%d" msgstr "%s: 欄位 `%s' 的值必須在範圍 %d…%d" #: locale/programs/ld-monetary.c:541 locale/programs/ld-numeric.c:229 #, c-format msgid "%s: value for field `%s' must be a single character" msgstr "%s: 欄位 `%s' 的值必須是個單一字元" #: locale/programs/ld-monetary.c:638 locale/programs/ld-numeric.c:273 #, c-format msgid "%s: `-1' must be last entry in `%s' field" msgstr "%s: `-1' 在 `%s' 欄位中必須是最後一個項目" #: locale/programs/ld-monetary.c:660 locale/programs/ld-numeric.c:290 #, c-format msgid "%s: values for field `%s' must be smaller than 127" msgstr "%s: 欄位 `%s' 的值必須小於 127" #: locale/programs/ld-monetary.c:706 msgid "conversion rate value cannot be zero" msgstr "轉換率的值不可以是零" #: locale/programs/ld-name.c:129 locale/programs/ld-telephone.c:126 #: locale/programs/ld-telephone.c:149 #, c-format msgid "%s: invalid escape sequence in field `%s'" msgstr "%s: 在欄位 `%s' 中的跳脫序列不適用" #: locale/programs/ld-time.c:247 #, c-format msgid "%s: direction flag in string %Zd in `era' field is not '+' nor '-'" msgstr "%s: 在 `era' 欄位的字串 %Zd 中，方向旗標既不是 '+' 也不是 '-'" #: locale/programs/ld-time.c:258 #, c-format msgid "%s: direction flag in string %Zd in `era' field is not a single character" msgstr "%s: 在 `era' 欄位的字串 %Zd 中，方向旗標不是一個單一字元" #: locale/programs/ld-time.c:271 #, c-format msgid "%s: invalid number for offset in string %Zd in `era' field" msgstr "%s: 在 `era' 欄位、字串 %Zd 中的位移數字不適用" #: locale/programs/ld-time.c:279 #, c-format msgid "%s: garbage at end of offset value in string %Zd in `era' field" msgstr "%s: 無用的資料，在 `era' 欄位、字串 %Zd 中末尾的位移值" #: locale/programs/ld-time.c:330 #, c-format msgid "%s: invalid starting date in string %Zd in `era' field" msgstr "%s: 在 `era' 欄位、字串 %Zd 中的起始日期不適用" #: locale/programs/ld-time.c:339 #, c-format msgid "%s: garbage at end of starting date in string %Zd in `era' field " msgstr "%s: 無用的資料，在 `era' 欄位、字串 %Zd 中末尾的起始日期" #: locale/programs/ld-time.c:358 #, c-format msgid "%s: starting date is invalid in string %Zd in `era' field" msgstr "%s: 在 `era' 區域的字串 %Zd 中的啟始日期是不適用的" #: locale/programs/ld-time.c:407 locale/programs/ld-time.c:435 #, c-format msgid "%s: invalid stopping date in string %Zd in `era' field" msgstr "%s: 在 `era' 欄位、字串 %Zd 中的結束日期不適用" #: locale/programs/ld-time.c:416 #, c-format msgid "%s: garbage at end of stopping date in string %Zd in `era' field" msgstr "%s: 無用的資料，在 `era' 區域、字串 %Zd 中末尾的結束日期" #: locale/programs/ld-time.c:444 #, c-format msgid "%s: missing era name in string %Zd in `era' field" msgstr "%s: 缺少 era 名稱，在 `era' 欄位、字串 %Zd 中" #: locale/programs/ld-time.c:456 #, c-format msgid "%s: missing era format in string %Zd in `era' field" msgstr "%s: 缺少 era 格式，在 `era' 欄位、字串 %Zd 中" #: locale/programs/ld-time.c:497 #, c-format msgid "%s: third operand for value of field `%s' must not be larger than %d" msgstr "%s: 欄位 `%s' 值的第三個運算元不可以比 %d 大" #: locale/programs/ld-time.c:505 locale/programs/ld-time.c:513 #: locale/programs/ld-time.c:521 #, c-format msgid "%s: values for field `%s' must not be larger than %d" msgstr "%s: 欄位 `%s' 的值不可以大於 %d" #: locale/programs/ld-time.c:726 #, c-format msgid "%s: too few values for field `%s'" msgstr "%s: 欄位 `%s' 中的值太少" #: locale/programs/ld-time.c:771 msgid "extra trailing semicolon" msgstr "多出的尾端分號" #: locale/programs/ld-time.c:774 #, c-format msgid "%s: too many values for field `%s'" msgstr "%s: 欄位 `%s' 中的值太多" #: locale/programs/linereader.c:130 msgid "trailing garbage at end of line" msgstr "列結尾的無用字元" #: locale/programs/linereader.c:298 msgid "garbage at end of number" msgstr "號碼結束位置的無用資料" #: locale/programs/linereader.c:410 msgid "garbage at end of character code specification" msgstr "字元編碼設定結束位置的無用資料" #: locale/programs/linereader.c:496 msgid "unterminated symbolic name" msgstr "沒有結尾的符號名稱" #: locale/programs/linereader.c:623 msgid "illegal escape sequence at end of string" msgstr "字串結尾有不合法的跳脫序列" #: locale/programs/linereader.c:627 locale/programs/linereader.c:855 msgid "unterminated string" msgstr "沒有結尾的字串" #: locale/programs/linereader.c:669 msgid "non-symbolic character value should not be used" msgstr "非符號性的字元值不應該被使用才對" #: locale/programs/linereader.c:816 #, c-format msgid "symbol `%.*s' not in charmap" msgstr "符號 `%.*s' 並不在字集對照表中" #: locale/programs/linereader.c:837 #, c-format msgid "symbol `%.*s' not in repertoire map" msgstr "符號 `%.*s' 並不在編碼對映檔中" #: locale/programs/locale-spec.c:130 #, c-format msgid "unknown name \"%s\"" msgstr "不明名稱「%s」" #: locale/programs/locale.c:72 msgid "System information:" msgstr "系統相關資訊:" #: locale/programs/locale.c:74 msgid "Write names of available locales" msgstr "寫出存在的語區資料名稱" #: locale/programs/locale.c:76 msgid "Write names of available charmaps" msgstr "寫出存在的字集對照表名稱" #: locale/programs/locale.c:77 msgid "Modify output format:" msgstr "修改輸出格式:" #: locale/programs/locale.c:78 msgid "Write names of selected categories" msgstr "寫出選取的類別名稱" #: locale/programs/locale.c:79 msgid "Write names of selected keywords" msgstr "寫出選取的關鍵字名稱" #: locale/programs/locale.c:80 msgid "Print more information" msgstr "印出更多的資訊" #: locale/programs/locale.c:85 msgid "Get locale-specific information." msgstr "取得語區資料特定的資訊" #: locale/programs/locale.c:88 msgid "" "NAME\n" "[-a|-m]" msgstr "" "名稱\n" "[-a|-m]" #: locale/programs/locale.c:192 #, c-format msgid "Cannot set LC_CTYPE to default locale" msgstr "無法將 LC_CTYPE 設置為預設的語區" #: locale/programs/locale.c:194 #, c-format msgid "Cannot set LC_MESSAGES to default locale" msgstr "無法將 LC_MESSAGES 設置為預設的語區" #: locale/programs/locale.c:207 #, c-format msgid "Cannot set LC_COLLATE to default locale" msgstr "無法將 LC_COLLATE 設置為預設的語區" #: locale/programs/locale.c:223 #, c-format msgid "Cannot set LC_ALL to default locale" msgstr "無法將 LC_ALL 設置為預設的語區" #: locale/programs/locale.c:519 #, c-format msgid "while preparing output" msgstr "在準備輸出時" #: locale/programs/localedef.c:121 msgid "Input Files:" msgstr "輸入檔:" #: locale/programs/localedef.c:123 msgid "Symbolic character names defined in FILE" msgstr "符號字元的名稱定義在檔案 FILE 中" #: locale/programs/localedef.c:125 msgid "Source definitions are found in FILE" msgstr "原始資料定義在檔案 FILE 中" #: locale/programs/localedef.c:127 msgid "FILE contains mapping from symbolic names to UCS4 values" msgstr "檔案 FILE 內含符號名與 UCS4 編碼之間的對映" #: locale/programs/localedef.c:131 msgid "Create output even if warning messages were issued" msgstr "產生輸出即使是有警告訊息" #: locale/programs/localedef.c:132 msgid "Create old-style tables" msgstr "產生舊格式的表格" #: locale/programs/localedef.c:133 msgid "Optional output file prefix" msgstr "可有可無的輸出檔路徑" #: locale/programs/localedef.c:134 msgid "Strictly conform to POSIX" msgstr "嚴格遵從 POSIX" #: locale/programs/localedef.c:136 msgid "Suppress warnings and information messages" msgstr "忽略警告與提示訊息" #: locale/programs/localedef.c:137 msgid "Print more messages" msgstr "印出更多的訊息" #: locale/programs/localedef.c:138 msgid "Archive control:" msgstr "保存檔控制:" #: locale/programs/localedef.c:140 msgid "Don't add new data to archive" msgstr "不要加入新資料到保存檔" #: locale/programs/localedef.c:142 msgid "Add locales named by parameters to archive" msgstr "藉由參數加入語區名稱到保存檔" #: locale/programs/localedef.c:143 msgid "Replace existing archive content" msgstr "替換已有的保存檔內容" #: locale/programs/localedef.c:145 msgid "Remove locales named by parameters from archive" msgstr "藉由參數從保存檔中刪除語區名稱" #: locale/programs/localedef.c:146 msgid "List content of archive" msgstr "列出保存檔的內容" #: locale/programs/localedef.c:148 msgid "locale.alias file to consult when making archive" msgstr "製作保存檔時查閱 locale.alias 檔案" #: locale/programs/localedef.c:150 msgid "Generate little-endian output" msgstr "" #: locale/programs/localedef.c:152 msgid "Generate big-endian output" msgstr "" #: locale/programs/localedef.c:157 msgid "Compile locale specification" msgstr "編譯語區資料規格" #: locale/programs/localedef.c:160 msgid "" "NAME\n" "[--add-to-archive|--delete-from-archive] FILE...\n" "--list-archive [FILE]" msgstr "" "NAME\n" "[--add-to-archive|--delete-from-archive] 檔案...\n" "--list-archive [檔案]" #: locale/programs/localedef.c:235 #, c-format msgid "cannot create directory for output files" msgstr "無法為輸出檔建立目錄" #: locale/programs/localedef.c:246 #, c-format msgid "FATAL: system does not define `_POSIX2_LOCALEDEF'" msgstr "嚴重錯誤: 系統沒有定義 `_POSIX2_LOCALEDEF'" #: locale/programs/localedef.c:260 locale/programs/localedef.c:276 #: locale/programs/localedef.c:614 locale/programs/localedef.c:634 #, c-format msgid "cannot open locale definition file `%s'" msgstr "無法開啟語區資料定義檔 `%s'" #: locale/programs/localedef.c:288 #, c-format msgid "cannot write output files to `%s'" msgstr "無法將輸出檔案寫入 `%s'" #: locale/programs/localedef.c:380 #, c-format msgid "" "System's directory for character maps : %s\n" "\t\t repertoire maps: %s\n" "\t\t locale path : %s\n" "%s" msgstr "" "系統的字元對應目錄：%s\n" "\t\t 編碼對應：%s\n" "\t\t 語區路徑 ：%s\n" "%s" #: locale/programs/localedef.c:582 #, c-format msgid "circular dependencies between locale definitions" msgstr "有語區資料在定義時發生循環相關的情況" #: locale/programs/localedef.c:588 #, c-format msgid "cannot add already read locale `%s' a second time" msgstr " `%s' 語區資料已經用過，不能重複加入" #: locale/programs/locarchive.c:133 locale/programs/locarchive.c:380 #, c-format msgid "cannot create temporary file: %s" msgstr "無法產生暫時檔：%s" #: locale/programs/locarchive.c:167 locale/programs/locarchive.c:430 #, c-format msgid "cannot initialize archive file" msgstr "無法起始保存檔" #: locale/programs/locarchive.c:174 locale/programs/locarchive.c:437 #, c-format msgid "cannot resize archive file" msgstr "無法改變保存檔大小" #: locale/programs/locarchive.c:189 locale/programs/locarchive.c:452 #: locale/programs/locarchive.c:674 #, c-format msgid "cannot map archive header" msgstr "無法註記保存檔表頭" #: locale/programs/locarchive.c:211 #, c-format msgid "failed to create new locale archive" msgstr "無法建立新的語區保存檔" #: locale/programs/locarchive.c:223 #, c-format msgid "cannot change mode of new locale archive" msgstr "無法改變新的語區資料保存檔狀態" #: locale/programs/locarchive.c:324 #, c-format msgid "cannot read data from locale archive" msgstr "無法從語區歸檔讀取資料" #: locale/programs/locarchive.c:355 #, c-format msgid "cannot map locale archive file" msgstr "無法映射語區資料保存檔" #: locale/programs/locarchive.c:460 #, c-format msgid "cannot lock new archive" msgstr "無法鎖定新的保存檔" #: locale/programs/locarchive.c:529 #, c-format msgid "cannot extend locale archive file" msgstr "無法延展語區資料保存檔" #: locale/programs/locarchive.c:538 #, c-format msgid "cannot change mode of resized locale archive" msgstr "無法改變已變更大小的語區資料保存檔狀態" #: locale/programs/locarchive.c:546 #, c-format msgid "cannot rename new archive" msgstr "無法更改新保存檔名稱" #: locale/programs/locarchive.c:608 #, c-format msgid "cannot open locale archive \"%s\"" msgstr "無法開啟語區資料保存檔 \"%s\"" #: locale/programs/locarchive.c:613 #, c-format msgid "cannot stat locale archive \"%s\"" msgstr "無法統計語區資料保存檔 \"%s\"" #: locale/programs/locarchive.c:632 #, c-format msgid "cannot lock locale archive \"%s\"" msgstr "無法鎖定語區資料保存檔 \"%s\"" #: locale/programs/locarchive.c:655 #, c-format msgid "cannot read archive header" msgstr "無法讀取保存檔表頭資料" #: locale/programs/locarchive.c:728 #, c-format msgid "locale '%s' already exists" msgstr "語區資料 `%s' 已經存在" #: locale/programs/locarchive.c:1003 locale/programs/locarchive.c:1018 #: locale/programs/locarchive.c:1030 locale/programs/locarchive.c:1042 #: locale/programs/locfile.c:350 #, c-format msgid "cannot add to locale archive" msgstr "無法加入語區資料保存檔" #: locale/programs/locarchive.c:1206 #, c-format msgid "locale alias file `%s' not found" msgstr "找不到語區資料別名檔 `%s'" #: locale/programs/locarchive.c:1357 #, c-format msgid "Adding %s\n" msgstr "加入 %s 中\n" #: locale/programs/locarchive.c:1363 #, c-format msgid "stat of \"%s\" failed: %s: ignored" msgstr "取得 \"%s\" 的資訊時失敗: %s: 已忽略" #: locale/programs/locarchive.c:1369 #, c-format msgid "\"%s\" is no directory; ignored" msgstr "\"%s\" 並非目錄; 已忽略" #: locale/programs/locarchive.c:1376 #, c-format msgid "cannot open directory \"%s\": %s: ignored" msgstr "無法開啟目錄 \"%s\": %s: 已忽略" #: locale/programs/locarchive.c:1448 #, c-format msgid "incomplete set of locale files in \"%s\"" msgstr "不完整的一組語區資料檔案存在於 \"%s\" 之中" #: locale/programs/locarchive.c:1512 #, c-format msgid "cannot read all files in \"%s\": ignored" msgstr "無法讀取 \"%s\" 中的所有檔案: 已忽略" #: locale/programs/locarchive.c:1584 #, c-format msgid "locale \"%s\" not in archive" msgstr "語區資料 \"%s\" 不在保存檔中" #: locale/programs/locfile.c:137 #, c-format msgid "argument to `%s' must be a single character" msgstr "給 `%s' 的引數必須是一個單字元" #: locale/programs/locfile.c:257 msgid "syntax error: not inside a locale definition section" msgstr "語法錯誤: 不能在語區資料定義區塊裡面使用" #: locale/programs/locfile.c:800 #, c-format msgid "cannot open output file `%s' for category `%s'" msgstr "無法開啟輸出檔 `%s' 供類別 `%s' 使用" #: locale/programs/locfile.c:824 #, c-format msgid "failure while writing data for category `%s'" msgstr "正在為類別 `%s' 寫入資料時發生錯誤" #: locale/programs/locfile.c:920 #, c-format msgid "cannot create output file `%s' for category `%s'" msgstr "無法建立輸出檔 `%s' 供類別 `%s' 使用" #: locale/programs/locfile.c:956 msgid "expecting string argument for `copy'" msgstr "`copy' 的引數應該是字串才對" #: locale/programs/locfile.c:960 msgid "locale name should consist only of portable characters" msgstr "語區資料的名稱應該以常用字元組成" #: locale/programs/locfile.c:979 msgid "no other keyword shall be specified when `copy' is used" msgstr "使用 `copy' 的時候不應該再用到任何其他的關鍵字了" #: locale/programs/locfile.c:993 #, c-format msgid "`%1$s' definition does not end with `END %1$s'" msgstr "`%1$s' 定義沒有以 `END %1$s' 結束" #: locale/programs/repertoire.c:229 locale/programs/repertoire.c:270 #: locale/programs/repertoire.c:295 #, c-format msgid "syntax error in repertoire map definition: %s" msgstr "編碼對映檔中的定義有語法錯誤: %s" #: locale/programs/repertoire.c:271 msgid "no or value given" msgstr "沒有給定 或 的值" #: locale/programs/repertoire.c:331 #, c-format msgid "cannot save new repertoire map" msgstr "無法儲存新的編碼對映檔" #: locale/programs/repertoire.c:342 #, c-format msgid "repertoire map file `%s' not found" msgstr "找不到編碼對映檔 `%s'" #: login/programs/pt_chown.c:78 #, c-format msgid "Set the owner, group and access permission of the slave pseudo terminal corresponding to the master pseudo terminal passed on file descriptor `%d'. This is the helper program for the `grantpt' function. It is not intended to be run directly from the command line.\n" msgstr "設定擁有者、群組和存取許可的從屬 pseudo 終端機相應到主 pseudo 終端機傳遞於檔案描述符號「%d」。 這是輔助程式程式用於「grantpt」函式。 它並未預想的為運行直接的地從命令列。\n" #: login/programs/pt_chown.c:92 #, c-format msgid "" "The owner is set to the current user, the group is set to `%s', and the access permission is set to `%o'.\n" "\n" "%s" msgstr "" "擁有者為設定到目前使用者，群組為設定到「%s」，而存取許可為設定到「%o」。\n" "\n" "%s" #: login/programs/pt_chown.c:198 #, c-format msgid "too many arguments" msgstr "太多引數" #: login/programs/pt_chown.c:206 #, c-format msgid "needs to be installed setuid `root'" msgstr "需要是已安裝的 setuid「根」" #: malloc/mcheck.c:346 msgid "memory is consistent, library is buggy\n" msgstr "記憶體內容一致，函式庫有問題\n" #: malloc/mcheck.c:349 msgid "memory clobbered before allocated block\n" msgstr "記憶體在配置區塊之前就 clobbered 了\n" #: malloc/mcheck.c:352 msgid "memory clobbered past end of allocated block\n" msgstr "記憶體在經過配置的區塊尾部時 clobbered 了\n" #: malloc/mcheck.c:355 msgid "block freed twice\n" msgstr "此區塊被用 free 指令釋放了兩次\n" #: malloc/mcheck.c:358 msgid "bogus mcheck_status, library is buggy\n" msgstr "記憶體檢查狀態 (mcheck_ststus) 有誤，您所用的函式庫有問題\n" #: malloc/memusage.sh:32 msgid "%s: option '%s' requires an argument\\n" msgstr "%s：選項『%s』需要一個引數\\n" #: malloc/memusage.sh:38 msgid "" "Usage: memusage [OPTION]... PROGRAM [PROGRAMOPTION]...\n" "Profile memory usage of PROGRAM.\n" "\n" " -n,--progname=NAME Name of the program file to profile\n" " -p,--png=FILE Generate PNG graphic and store it in FILE\n" " -d,--data=FILE Generate binary data file and store it in FILE\n" " -u,--unbuffered Don't buffer output\n" " -b,--buffer=SIZE Collect SIZE entries before writing them out\n" " --no-timer Don't collect additional information through timer\n" " -m,--mmap Also trace mmap & friends\n" "\n" " -?,--help Print this help and exit\n" " --usage Give a short usage message\n" " -V,--version Print version information and exit\n" "\n" " The following options only apply when generating graphical output:\n" " -t,--time-based Make graph linear in time\n" " -T,--total Also draw graph of total memory use\n" " --title=STRING Use STRING as title of the graph\n" " -x,--x-size=SIZE Make graphic SIZE pixels wide\n" " -y,--y-size=SIZE Make graphic SIZE pixels high\n" "\n" "Mandatory arguments to long options are also mandatory for any corresponding\n" "short options.\n" "\n" msgstr "" "用法：memusage [選項]… 程式 [PROGRAMOPTION]…\n" "側寫檔記憶體用法的程式。\n" "\n" " -n,--progname=名稱 做為側寫的程式檔案名稱\n" " -p,--png=檔案 產生 PNG 圖形並儲存它於檔案\n" " -d,--data=檔案 產生二進位資料檔案並儲存它於檔案\n" " -u,--unbuffered 不要將輸出緩衝\n" " -b,--buffer=大小 於寫出它們之前收集大小項目\n" " --no-timer 不透過計時器收集附加資訊\n" " -m,--mmap 同時追蹤 mmap 和相關者\n" "\n" " -?,--help 印出這個說明然後離開\n" " --usage 給出短用法訊息\n" " -V,--version 印出版本資訊然後離開\n" "\n" "下列的選項只有套用時產生圖形輸出：\n" " -t,--time-based 及時定製圖形線性\n" " -T,--total 同時繪製記憶體使用總計圖形\n" " --title=字串 使用字串做為圖形的標題\n" " -x,--x-size=大小 定製圖形大小像素寬度\n" " -y,--y-size=大小 定製圖形大小像素高度\n" "\n" "長選項的必要引數同樣也是相對應短選項的必要引數。\n" "\n" #: malloc/memusage.sh:99 msgid "" "Syntax: memusage [--data=FILE] [--progname=NAME] [--png=FILE] [--unbuffered]\n" "\t [--buffer=SIZE] [--no-timer] [--time-based] [--total]\n" "\t [--title=STRING] [--x-size=SIZE] [--y-size=SIZE]\n" "\t PROGRAM [PROGRAMOPTION]..." msgstr "" "語法：memusage [--data=檔案] [--progname=名稱] [--png=檔案] [--unbuffered]\n" "\t [--buffer=大小] [--no-timer] [--time-based] [--total]\n" "\t [--title=字串] [--x-size=大小] [--y-size=大小]\n" "\t 程式 [PROGRAMOPTION]…" #: malloc/memusage.sh:191 msgid "memusage: option \\`${1##*=}' is ambiguous" msgstr "memusage：選項 \\「${1##*=}」為模稜兩可的" #: malloc/memusage.sh:200 msgid "memusage: unrecognized option \\`$1'" msgstr "memusage：無法辨識的選項「$1」" #: malloc/memusage.sh:213 msgid "No program name given" msgstr "未給定程式名稱" #: malloc/memusagestat.c:56 msgid "Name output file" msgstr "名稱輸出檔" #: malloc/memusagestat.c:57 msgid "STRING" msgstr "字串" #: malloc/memusagestat.c:57 msgid "Title string used in output graphic" msgstr "在輸出的圖像中使用有標頭的字串" #: malloc/memusagestat.c:58 msgid "Generate output linear to time (default is linear to number of function calls)" msgstr "產生輸出與時間呈線性關係 (預設是與函式呼叫數目呈線性關係)" #: malloc/memusagestat.c:62 msgid "Also draw graph for total memory consumption" msgstr "同時對總記憶體用量作圖" #: malloc/memusagestat.c:63 msgid "VALUE" msgstr "像素值" #: malloc/memusagestat.c:64 msgid "Make output graphic VALUE pixels wide" msgstr "定製輸出圖形的寬度像素值" #: malloc/memusagestat.c:65 msgid "Make output graphic VALUE pixels high" msgstr "定製輸出圖形的高度像素值" #: malloc/memusagestat.c:70 msgid "Generate graphic from memory profiling data" msgstr "從記憶體性能測試資料產生圖像" #: malloc/memusagestat.c:73 msgid "DATAFILE [OUTFILE]" msgstr "資料檔 [輸出檔]" #: misc/error.c:192 msgid "Unknown system error" msgstr "未知的系統錯誤" #: nis/nis_callback.c:188 msgid "unable to free arguments" msgstr "無法釋放參數" #: nis/nis_error.h:1 nis/ypclnt.c:831 nis/ypclnt.c:919 posix/regcomp.c:137 #: sysdeps/gnu/errlist.c:21 msgid "Success" msgstr "成功" #: nis/nis_error.h:2 msgid "Probable success" msgstr "可能成功" #: nis/nis_error.h:3 msgid "Not found" msgstr "找不到" #: nis/nis_error.h:4 msgid "Probably not found" msgstr "可能找不到" #: nis/nis_error.h:5 msgid "Cache expired" msgstr "快取過時取消了" #: nis/nis_error.h:6 msgid "NIS+ servers unreachable" msgstr "NIS+ 伺服器無法連線" #: nis/nis_error.h:7 msgid "Unknown object" msgstr "未知的目的檔" #: nis/nis_error.h:8 msgid "Server busy, try again" msgstr "伺服器忙碌中，請再試一次" #: nis/nis_error.h:9 msgid "Generic system error" msgstr "一般系統錯誤" #: nis/nis_error.h:10 msgid "First/next chain broken" msgstr "第一個/下一個序列壞掉了" #. TRANS Permission denied; the file permissions do not allow the attempted operation. #: nis/nis_error.h:11 nis/ypclnt.c:876 sysdeps/gnu/errlist.c:158 msgid "Permission denied" msgstr "拒絕不符權限的操作" #: nis/nis_error.h:12 msgid "Not owner" msgstr "並非擁有者" #: nis/nis_error.h:13 msgid "Name not served by this server" msgstr "網域名稱服務不是由此伺服器提供" #: nis/nis_error.h:14 msgid "Server out of memory" msgstr "伺服器記憶體已用完" #: nis/nis_error.h:15 msgid "Object with same name exists" msgstr "同名的目標已經存在" #: nis/nis_error.h:16 msgid "Not master server for this domain" msgstr "並非此一領域的主伺服器" #: nis/nis_error.h:17 msgid "Invalid object for operation" msgstr "不適用的運作物件" #: nis/nis_error.h:18 msgid "Malformed name, or illegal name" msgstr "奇怪的名字，或不合法的名字" #: nis/nis_error.h:19 msgid "Unable to create callback" msgstr "無法建立回叫資料 (callback)" #: nis/nis_error.h:20 msgid "Results sent to callback proc" msgstr "結果傳送給回傳程序" #: nis/nis_error.h:21 msgid "Not found, no such name" msgstr "找不到，沒有此一名稱" #: nis/nis_error.h:22 msgid "Name/entry isn't unique" msgstr "名稱/項目不是唯一的" #: nis/nis_error.h:23 msgid "Modification failed" msgstr "修改失敗" #: nis/nis_error.h:24 msgid "Database for table does not exist" msgstr "表格的資料庫不存在" #: nis/nis_error.h:25 msgid "Entry/table type mismatch" msgstr "項目/表格型態不符" #: nis/nis_error.h:26 msgid "Link points to illegal name" msgstr "連結指向不合法的名稱" #: nis/nis_error.h:27 msgid "Partial success" msgstr "部分成功" #: nis/nis_error.h:28 msgid "Too many attributes" msgstr "太多的屬性" #: nis/nis_error.h:29 msgid "Error in RPC subsystem" msgstr "RPC 子系統錯誤" #: nis/nis_error.h:30 msgid "Missing or malformed attribute" msgstr "缺少或奇怪的屬性" #: nis/nis_error.h:31 msgid "Named object is not searchable" msgstr "有名稱的物件無法搜尋" #: nis/nis_error.h:32 msgid "Error while talking to callback proc" msgstr "在與 callback proc 通訊時錯誤" #: nis/nis_error.h:33 msgid "Non NIS+ namespace encountered" msgstr "遭遇違反 NIS+ 命名規則的名稱" #: nis/nis_error.h:34 msgid "Illegal object type for operation" msgstr "不合法的運作物件型態" #: nis/nis_error.h:35 msgid "Passed object is not the same object on server" msgstr "經過的物件與伺服器上的並不相同" #: nis/nis_error.h:36 msgid "Modify operation failed" msgstr "修改運作方式失敗" #: nis/nis_error.h:37 msgid "Query illegal for named table" msgstr "對記名表格的查詢並不合法" #: nis/nis_error.h:38 msgid "Attempt to remove a non-empty table" msgstr "嘗試刪除一個有內容的表格" #: nis/nis_error.h:39 msgid "Error in accessing NIS+ cold start file. Is NIS+ installed?" msgstr "存取 NIS+ 原始啟動檔錯誤。有安裝 NIS+ 嗎？" #: nis/nis_error.h:40 msgid "Full resync required for directory" msgstr "目錄的 resync 請求已滿" #: nis/nis_error.h:41 msgid "NIS+ operation failed" msgstr "NIS+ 運作失敗" #: nis/nis_error.h:42 msgid "NIS+ service is unavailable or not installed" msgstr "NIS+ 服務無法取得或者尚未安裝" #: nis/nis_error.h:43 msgid "Yes, 42 is the meaning of life" msgstr "是的，42 就是存在的意義" #: nis/nis_error.h:44 msgid "Unable to authenticate NIS+ server" msgstr "無法對 NIS+ 的伺服端進行認證" #: nis/nis_error.h:45 msgid "Unable to authenticate NIS+ client" msgstr "無法對 NIS+ 的請求端進行認證" #: nis/nis_error.h:46 msgid "No file space on server" msgstr "伺服器上沒有檔案空間" #: nis/nis_error.h:47 msgid "Unable to create process on server" msgstr "無法在伺服器上建立執行程序" #: nis/nis_error.h:48 msgid "Master server busy, full dump rescheduled." msgstr "主要伺服器忙碌中，重新進行完整資料傾卸排程。" #: nis/nis_local_names.c:121 #, c-format msgid "LOCAL entry for UID %d in directory %s not unique\n" msgstr "UID 為 %d 的項目在本地端中並不是唯一的 (在 %s 目錄裡面)\n" #: nis/nis_print.c:51 msgid "UNKNOWN" msgstr "不明" #: nis/nis_print.c:109 msgid "BOGUS OBJECT\n" msgstr "假的物件\n" #: nis/nis_print.c:112 msgid "NO OBJECT\n" msgstr "沒有物件\n" #: nis/nis_print.c:115 msgid "DIRECTORY\n" msgstr "目錄\n" #: nis/nis_print.c:118 msgid "GROUP\n" msgstr "群組\n" #: nis/nis_print.c:121 msgid "TABLE\n" msgstr "表格\n" #: nis/nis_print.c:124 msgid "ENTRY\n" msgstr "項目\n" #: nis/nis_print.c:127 msgid "LINK\n" msgstr "連結\n" #: nis/nis_print.c:130 msgid "PRIVATE\n" msgstr "私有的\n" #: nis/nis_print.c:133 msgid "(Unknown object)\n" msgstr "(未知的物件)\n" #: nis/nis_print.c:167 #, c-format msgid "Name : `%s'\n" msgstr "名稱 : `%s'\n" #: nis/nis_print.c:168 #, c-format msgid "Type : %s\n" msgstr "格式 : %s\n" #: nis/nis_print.c:173 msgid "Master Server :\n" msgstr "主要伺服器 :\n" #: nis/nis_print.c:175 msgid "Replicate :\n" msgstr "複製 :\n" #: nis/nis_print.c:176 #, c-format msgid "\tName : %s\n" msgstr "\t名稱 : %s\n" #: nis/nis_print.c:177 msgid "\tPublic Key : " msgstr "\t公共鑰匙 : " #: nis/nis_print.c:181 msgid "None.\n" msgstr "無\n" #: nis/nis_print.c:184 #, c-format msgid "Diffie-Hellmann (%d bits)\n" msgstr "Diffie-Hellmann (%d 位元)\n" #: nis/nis_print.c:189 #, c-format msgid "RSA (%d bits)\n" msgstr "RSA (%d 位元)\n" #: nis/nis_print.c:192 msgid "Kerberos.\n" msgstr "Kerberos.\n" #: nis/nis_print.c:195 #, c-format msgid "Unknown (type = %d, bits = %d)\n" msgstr "未知的 (型態 = %d，位元 = %d)\n" #: nis/nis_print.c:206 #, c-format msgid "\tUniversal addresses (%u)\n" msgstr "\t絕對位址 (%u)\n" #: nis/nis_print.c:228 msgid "Time to live : " msgstr "存在時間 : " #: nis/nis_print.c:230 msgid "Default Access rights :\n" msgstr "預設的存取權限 :\n" #: nis/nis_print.c:239 #, c-format msgid "\tType : %s\n" msgstr "\t型別 : %s\n" #: nis/nis_print.c:240 msgid "\tAccess rights: " msgstr "\t存取權限: " #: nis/nis_print.c:254 msgid "Group Flags :" msgstr "群組旗標 :" #: nis/nis_print.c:257 msgid "" "\n" "Group Members :\n" msgstr "" "\n" "群組的成員 :\n" #: nis/nis_print.c:269 #, c-format msgid "Table Type : %s\n" msgstr "表格形式 : %s\n" #: nis/nis_print.c:270 #, c-format msgid "Number of Columns : %d\n" msgstr "欄位的數目 : %d\n" #: nis/nis_print.c:271 #, c-format msgid "Character Separator : %c\n" msgstr "字元分隔號 : %c\n" #: nis/nis_print.c:272 #, c-format msgid "Search Path : %s\n" msgstr "搜尋路徑 : %s\n" #: nis/nis_print.c:273 msgid "Columns :\n" msgstr "行 :\n" #: nis/nis_print.c:276 #, c-format msgid "\t[%d]\tName : %s\n" msgstr "\t[%d]\t名稱 : %s\n" #: nis/nis_print.c:278 msgid "\t\tAttributes : " msgstr "\t\t屬性 : " #: nis/nis_print.c:280 msgid "\t\tAccess Rights : " msgstr "\t\t存取權限 : " #: nis/nis_print.c:290 msgid "Linked Object Type : " msgstr "連結的物件型態 : " #: nis/nis_print.c:292 #, c-format msgid "Linked to : %s\n" msgstr "連結到 : %s\n" #: nis/nis_print.c:302 #, c-format msgid "\tEntry data of type %s\n" msgstr "\t型別為 %s 的項目資料\n" #: nis/nis_print.c:305 #, c-format msgid "\t[%u] - [%u bytes] " msgstr "\t[%u] - [%u 位元組] " #: nis/nis_print.c:308 msgid "Encrypted data\n" msgstr "編碼資料\n" #: nis/nis_print.c:310 msgid "Binary data\n" msgstr "二進位資料\n" #: nis/nis_print.c:326 #, c-format msgid "Object Name : %s\n" msgstr "物件名稱 : %s\n" #: nis/nis_print.c:327 #, c-format msgid "Directory : %s\n" msgstr "目錄 : %s\n" #: nis/nis_print.c:328 #, c-format msgid "Owner : %s\n" msgstr "擁有者 : %s\n" #: nis/nis_print.c:329 #, c-format msgid "Group : %s\n" msgstr "群組 : %s\n" #: nis/nis_print.c:330 msgid "Access Rights : " msgstr "存取權限 : " #: nis/nis_print.c:332 #, c-format msgid "" "\n" "Time to Live : " msgstr "" "\n" "存在的時間 : " #: nis/nis_print.c:335 #, c-format msgid "Creation Time : %s" msgstr "產生時間 : %s" #: nis/nis_print.c:337 #, c-format msgid "Mod. Time : %s" msgstr "修改時間 : %s" #: nis/nis_print.c:338 msgid "Object Type : " msgstr "物件型別 : " #: nis/nis_print.c:358 #, c-format msgid " Data Length = %u\n" msgstr " 資料長度 = %u\n" #: nis/nis_print.c:372 #, c-format msgid "Status : %s\n" msgstr "狀態 : %s\n" #: nis/nis_print.c:373 #, c-format msgid "Number of objects : %u\n" msgstr "物件的數目 : %u\n" #: nis/nis_print.c:377 #, c-format msgid "Object #%d:\n" msgstr "目的檔 #%d:\n" #: nis/nis_print_group_entry.c:116 #, c-format msgid "Group entry for \"%s.%s\" group:\n" msgstr "群組 \"%s.%s\" 群組項目:\n" #: nis/nis_print_group_entry.c:124 msgid " Explicit members:\n" msgstr " 明確的成員:\n" #: nis/nis_print_group_entry.c:129 msgid " No explicit members\n" msgstr " 沒有明確的成員\n" #: nis/nis_print_group_entry.c:132 msgid " Implicit members:\n" msgstr " 不明確的成員:\n" #: nis/nis_print_group_entry.c:137 msgid " No implicit members\n" msgstr " 沒有不明確的成員\n" #: nis/nis_print_group_entry.c:140 msgid " Recursive members:\n" msgstr " 遞迴的成員:\n" #: nis/nis_print_group_entry.c:145 msgid " No recursive members\n" msgstr " 沒有遞迴的成員\n" #: nis/nis_print_group_entry.c:148 msgid " Explicit nonmembers:\n" msgstr " 明確的非成員:\n" #: nis/nis_print_group_entry.c:153 msgid " No explicit nonmembers\n" msgstr " 沒有明確的非成員\n" #: nis/nis_print_group_entry.c:156 msgid " Implicit nonmembers:\n" msgstr " 不明確的非成員:\n" #: nis/nis_print_group_entry.c:161 msgid " No implicit nonmembers\n" msgstr " 沒有不明確的非成員\n" #: nis/nis_print_group_entry.c:164 msgid " Recursive nonmembers:\n" msgstr " 遞迴的非成員：\n" #: nis/nis_print_group_entry.c:169 msgid " No recursive nonmembers\n" msgstr " 沒有遞迴的非成員\n" #: nis/nss_nisplus/nisplus-publickey.c:100 #: nis/nss_nisplus/nisplus-publickey.c:182 #, c-format msgid "DES entry for netname %s not unique\n" msgstr "netname %s 的 DES 項目並不唯一\n" #: nis/nss_nisplus/nisplus-publickey.c:219 #, c-format msgid "netname2user: missing group id list in `%s'" msgstr "netname2user：在「%s」中缺少群組識別號清單" #: nis/nss_nisplus/nisplus-publickey.c:301 #: nis/nss_nisplus/nisplus-publickey.c:307 #: nis/nss_nisplus/nisplus-publickey.c:372 #: nis/nss_nisplus/nisplus-publickey.c:381 #, c-format msgid "netname2user: (nis+ lookup): %s\n" msgstr "netname2user: (nis+ 搜尋): %s\n" #: nis/nss_nisplus/nisplus-publickey.c:320 #, c-format msgid "netname2user: DES entry for %s in directory %s not unique" msgstr "netname2user: %s 的 DES 項目在 %s 目錄下並不是唯一的" #: nis/nss_nisplus/nisplus-publickey.c:338 #, c-format msgid "netname2user: principal name `%s' too long" msgstr "netname2user: 主要名稱 `%s' 太長了" #: nis/nss_nisplus/nisplus-publickey.c:394 #, c-format msgid "netname2user: LOCAL entry for %s in directory %s not unique" msgstr "netname2user: %s 的本地端項目在 %s 目錄下並不是唯一的" #: nis/nss_nisplus/nisplus-publickey.c:401 msgid "netname2user: should not have uid 0" msgstr "netname2user: 不能有使用者 id 為 0 的情況" #: nis/ypclnt.c:834 msgid "Request arguments bad" msgstr "必須引數有錯誤" #: nis/ypclnt.c:837 msgid "RPC failure on NIS operation" msgstr "NIS 運作 RPC 失敗" #: nis/ypclnt.c:840 msgid "Can't bind to server which serves this domain" msgstr "無法與服務於此網域的伺服器聯繫" #: nis/ypclnt.c:843 msgid "No such map in server's domain" msgstr "在伺服器的領域資料中找不到此一對映表" #: nis/ypclnt.c:846 msgid "No such key in map" msgstr "在對映表中沒有此一鍵值" #: nis/ypclnt.c:849 msgid "Internal NIS error" msgstr "內部 NIS 錯誤" #: nis/ypclnt.c:852 msgid "Local resource allocation failure" msgstr "區域資源配置失敗" #: nis/ypclnt.c:855 msgid "No more records in map database" msgstr "在對映表資料庫中沒有其他紀錄了" #: nis/ypclnt.c:858 msgid "Can't communicate with portmapper" msgstr "無法與 portmapper 通訊" #: nis/ypclnt.c:861 msgid "Can't communicate with ypbind" msgstr "無法與 ypbind 通訊" #: nis/ypclnt.c:864 msgid "Can't communicate with ypserv" msgstr "無法與 ypserv 通訊" #: nis/ypclnt.c:867 msgid "Local domain name not set" msgstr "區域網域名稱沒有設定" #: nis/ypclnt.c:870 msgid "NIS map database is bad" msgstr "NIS 對映資料庫是壞的" #: nis/ypclnt.c:873 msgid "NIS client/server version mismatch - can't supply service" msgstr "NIS 請求端/伺服端版本不符合 - 無法提供服務" #: nis/ypclnt.c:879 msgid "Database is busy" msgstr "資料庫正在忙碌" #: nis/ypclnt.c:882 msgid "Unknown NIS error code" msgstr "未知的 NIS 錯誤碼" #: nis/ypclnt.c:922 msgid "Internal ypbind error" msgstr "內部 ypbind 錯誤" #: nis/ypclnt.c:925 msgid "Domain not bound" msgstr "網域找不到" #: nis/ypclnt.c:928 msgid "System resource allocation failure" msgstr "系統資源配置失敗" #: nis/ypclnt.c:931 msgid "Unknown ypbind error" msgstr "未知的 ypbind 錯誤" #: nis/ypclnt.c:972 msgid "yp_update: cannot convert host to netname\n" msgstr "yp_update: 無法轉換主機的網路名稱\n" #: nis/ypclnt.c:990 msgid "yp_update: cannot get server address\n" msgstr "yp_update: 無法取得伺服器位址\n" #: nscd/aicache.c:83 nscd/hstcache.c:485 #, c-format msgid "Haven't found \"%s\" in hosts cache!" msgstr "尚未在 hosts 快取中找到 \"%s\"!" #: nscd/aicache.c:85 nscd/hstcache.c:487 #, c-format msgid "Reloading \"%s\" in hosts cache!" msgstr "重新載入「%s」於主機快取！" #: nscd/cache.c:151 #, c-format msgid "add new entry \"%s\" of type %s for %s to cache%s" msgstr "加入新的項目「%s」的型態 %s 用於 %s 到 cache%s" #: nscd/cache.c:153 msgid " (first)" msgstr " (先)" #: nscd/cache.c:285 nscd/connections.c:1000 #, c-format msgid "cannot stat() file `%s': %s" msgstr "無法 stat() 檔案 `%s': %s" #: nscd/cache.c:331 #, c-format msgid "pruning %s cache; time %ld" msgstr "pruning %s 快取；時間 %ld" #: nscd/cache.c:360 #, c-format msgid "considering %s entry \"%s\", timeout %" msgstr "認為中 %s 項目「%s」，逾時 %" #: nscd/connections.c:553 #, c-format msgid "invalid persistent database file \"%s\": %s" msgstr "無效的永久性的資料庫檔案「%s」：%s" #: nscd/connections.c:561 msgid "uninitialized header" msgstr "未起始的標頭" #: nscd/connections.c:566 msgid "header size does not match" msgstr "頁首大小不吻合" #: nscd/connections.c:576 msgid "file size does not match" msgstr "檔案大小不吻合" #: nscd/connections.c:593 msgid "verification failed" msgstr "查核失敗" #: nscd/connections.c:607 #, c-format msgid "suggested size of table for database %s larger than the persistent database's table" msgstr "用於資料庫 %s 的建議表格大小大於永久性的資料庫表格" #: nscd/connections.c:618 nscd/connections.c:702 #, c-format msgid "cannot create read-only descriptor for \"%s\"; no mmap" msgstr "無法建立用於「%s」的唯讀描述元；無 mmap" #: nscd/connections.c:634 #, c-format msgid "cannot access '%s'" msgstr "無法存取『%s』" #: nscd/connections.c:682 #, c-format msgid "database for %s corrupted or simultaneously used; remove %s manually if necessary and restart" msgstr "資料庫用於 %s 已損壞或同步地使用；移除 %s 手動地如果必要的話和重新啟動" #: nscd/connections.c:688 #, c-format msgid "cannot create %s; no persistent database used" msgstr "無法建立 %s; 未使用永久性的資料庫" #: nscd/connections.c:691 #, c-format msgid "cannot create %s; no sharing possible" msgstr "無法建立 %s; 不可能共享" #: nscd/connections.c:762 #, c-format msgid "cannot write to database file %s: %s" msgstr "無法寫入資料庫檔案 %s: %s" #: nscd/connections.c:801 #, c-format msgid "cannot set socket to close on exec: %s; disabling paranoia mode" msgstr "無法設定通訊端到關閉於 exec：%s; 停用 paranoia 模式" #: nscd/connections.c:850 #, c-format msgid "cannot open socket: %s" msgstr "無法開啟 socket: %s" #: nscd/connections.c:870 nscd/connections.c:934 #, c-format msgid "cannot change socket to nonblocking mode: %s" msgstr "無法變更通訊端為非區塊模式：%s" #: nscd/connections.c:878 nscd/connections.c:944 #, c-format msgid "cannot set socket to close on exec: %s" msgstr "無法設定通訊端於 exec：%s 時關閉" #: nscd/connections.c:891 #, c-format msgid "cannot enable socket to accept connections: %s" msgstr "無法開啟 socket 來接受連線: %s" #: nscd/connections.c:984 #, c-format msgid "register trace file %s for database %s" msgstr "註冊追蹤檔案 %s 用於資料庫 %s" #: nscd/connections.c:1114 #, c-format msgid "provide access to FD %d, for %s" msgstr "提供存取到 FD %d, 用於 %s" #: nscd/connections.c:1126 #, c-format msgid "cannot handle old request version %d; current version is %d" msgstr "不能處理舊 %d 版的請求；目前使用的版本是 %d" #: nscd/connections.c:1148 #, c-format msgid "request from %ld not handled due to missing permission" msgstr "由於缺少權限而無法處理來自 %ld 的要求" #: nscd/connections.c:1153 #, c-format msgid "request from '%s' [%ld] not handled due to missing permission" msgstr "由於缺少權限而無法處理來自 '%s' [%ld] 的要求" #: nscd/connections.c:1158 msgid "request not handled due to missing permission" msgstr "要求無法控柄的由於缺少權限" #: nscd/connections.c:1196 nscd/connections.c:1249 #, c-format msgid "cannot write result: %s" msgstr "無法寫入結果: %s" #: nscd/connections.c:1340 #, c-format msgid "error getting caller's id: %s" msgstr "取得呼叫程式識別碼時發生錯誤: %s" #: nscd/connections.c:1400 #, c-format msgid "cannot open /proc/self/cmdline: %s; disabling paranoia mode" msgstr "無法開啟/proc/self/cmdline：%s; 停用 paranoia 模式" #: nscd/connections.c:1414 #, c-format msgid "cannot read /proc/self/cmdline: %s; disabling paranoia mode" msgstr "無法讀取/proc/self/cmdline：%s; 停用 paranoia 模式" #: nscd/connections.c:1454 #, c-format msgid "cannot change to old UID: %s; disabling paranoia mode" msgstr "無法變更為舊的 UID：%s; 停用 paranoia 模式" #: nscd/connections.c:1464 #, c-format msgid "cannot change to old GID: %s; disabling paranoia mode" msgstr "無法變更為舊的 GID：%s; 停用 paranoia 模式" #: nscd/connections.c:1477 #, c-format msgid "cannot change to old working directory: %s; disabling paranoia mode" msgstr "無法變更為舊的工作目錄：%s; 停用 paranoia 模式" #: nscd/connections.c:1523 #, c-format msgid "re-exec failed: %s; disabling paranoia mode" msgstr "re-exec 失敗：%s; 停用 paranoia 模式" #: nscd/connections.c:1532 #, c-format msgid "cannot change current working directory to \"/\": %s" msgstr "無法變更目前的工作目錄到「/」：%s" #: nscd/connections.c:1725 #, c-format msgid "short read while reading request: %s" msgstr "讀取請求時發現輸入值過短: %s" #: nscd/connections.c:1758 #, c-format msgid "key length in request too long: %d" msgstr "在此請求中使用的鍵值太長了: %d" #: nscd/connections.c:1771 #, c-format msgid "short read while reading request key: %s" msgstr "讀取請求的鍵值時發現輸入值過短: %s" #: nscd/connections.c:1781 #, c-format msgid "handle_request: request received (Version = %d) from PID %ld" msgstr "handle_request: 請求已被接受 (版本為 %d) 來自於 PID %ld" #: nscd/connections.c:1786 #, c-format msgid "handle_request: request received (Version = %d)" msgstr "handle_request: 請求已被接受 (版本為 %d)" #: nscd/connections.c:2050 nscd/connections.c:2252 #, c-format msgid "disabled inotify after read error %d" msgstr "讀取 %d 錯誤之後已停用 inotify" #: nscd/connections.c:2375 msgid "could not initialize conditional variable" msgstr "無法初始化條件變數" #: nscd/connections.c:2383 msgid "could not start clean-up thread; terminating" msgstr "無法開始清理執行緒；終止中" #: nscd/connections.c:2397 msgid "could not start any worker thread; terminating" msgstr "無法開始任何背景工作執行緒；終止中" #: nscd/connections.c:2452 nscd/connections.c:2454 nscd/connections.c:2470 #: nscd/connections.c:2480 nscd/connections.c:2498 nscd/connections.c:2509 #: nscd/connections.c:2519 #, c-format msgid "Failed to run nscd as user '%s'" msgstr "以使用者 '%s' 的身分執行 nscd 失敗" #: nscd/connections.c:2472 msgid "initial getgrouplist failed" msgstr "初始 getgrouplist 失敗" #: nscd/connections.c:2481 msgid "getgrouplist failed" msgstr "getgrouplist 失敗" #: nscd/connections.c:2499 msgid "setgroups failed" msgstr "setgroups 失敗" #: nscd/grpcache.c:405 nscd/hstcache.c:432 nscd/initgrcache.c:410 #: nscd/pwdcache.c:383 nscd/servicescache.c:338 #, c-format msgid "short write in %s: %s" msgstr "寫入 %s 的資料過短: %s" #: nscd/grpcache.c:450 nscd/initgrcache.c:77 #, c-format msgid "Haven't found \"%s\" in group cache!" msgstr "尚未在群組快取中找到 \"%s\"!" #: nscd/grpcache.c:452 nscd/initgrcache.c:79 #, c-format msgid "Reloading \"%s\" in group cache!" msgstr "重新載入「%s」於群組快取！" #: nscd/grpcache.c:531 #, c-format msgid "Invalid numeric gid \"%s\"!" msgstr "無效的 gid 數值 \"%s\"!" #: nscd/mem.c:425 #, c-format msgid "freed %zu bytes in %s cache" msgstr "在 %2$s 快取中 %1$zu 位元組可用" #: nscd/mem.c:568 #, c-format msgid "no more memory for database '%s'" msgstr "無記憶體可用於資料庫「%s」" #: nscd/netgroupcache.c:121 #, c-format msgid "Haven't found \"%s\" in netgroup cache!" msgstr "尚未在網路群組快取中找到「%s」！" #: nscd/netgroupcache.c:123 #, c-format msgid "Reloading \"%s\" in netgroup cache!" msgstr "重新在網路群組快取中載入「%s」！" #: nscd/netgroupcache.c:495 #, c-format msgid "Haven't found \"%s (%s,%s,%s)\" in netgroup cache!" msgstr "尚未在網路群組快取中找到「%s (%s,%s,%s)」！" #: nscd/netgroupcache.c:498 #, c-format msgid "Reloading \"%s (%s,%s,%s)\" in netgroup cache!" msgstr "重新在網路群組快取中載入「%s (%s,%s,%s)」！" #: nscd/nscd.c:106 msgid "Read configuration data from NAME" msgstr "自名稱中讀取設定資料" #: nscd/nscd.c:108 msgid "Do not fork and display messages on the current tty" msgstr "不在目前的 tty 產生子行程 (fork) 以及顯示訊息" #: nscd/nscd.c:110 msgid "Do not fork, but otherwise behave like a daemon" msgstr "不衍生，但是否則 behave 如同守護程式" #: nscd/nscd.c:111 msgid "NUMBER" msgstr "號碼" #: nscd/nscd.c:111 msgid "Start NUMBER threads" msgstr "啟動執行緒" #: nscd/nscd.c:112 msgid "Shut the server down" msgstr "將伺服器關閉" #: nscd/nscd.c:113 msgid "Print current configuration statistics" msgstr "印出目前組態統計" #: nscd/nscd.c:114 msgid "TABLE" msgstr "表格" #: nscd/nscd.c:115 msgid "Invalidate the specified cache" msgstr "使選定的快取無效" #: nscd/nscd.c:116 msgid "TABLE,yes" msgstr "要製作表格" #: nscd/nscd.c:117 msgid "Use separate cache for each user" msgstr "對不同使用者使用不同的快取檔案" #: nscd/nscd.c:122 msgid "Name Service Cache Daemon." msgstr "網域名稱快取精靈" #: nscd/nscd.c:155 nss/getent.c:1003 nss/makedb.c:206 #, c-format msgid "wrong number of arguments" msgstr "參數數目不對" #: nscd/nscd.c:165 #, c-format msgid "failure while reading configuration file; this is fatal" msgstr "讀取組態檔案時失敗；這是一個嚴重錯誤" #: nscd/nscd.c:174 #, c-format msgid "already running" msgstr "已在執行" #: nscd/nscd.c:194 #, fuzzy, c-format #| msgid "cannot create directory for output files" msgid "cannot create a pipe to talk to the child" msgstr "無法為輸出檔建立目錄" #: nscd/nscd.c:198 #, c-format msgid "cannot fork" msgstr "無法衍生" #: nscd/nscd.c:268 msgid "cannot change current working directory to \"/\"" msgstr "無法變更目前的工作目錄到「/」" #: nscd/nscd.c:276 msgid "Could not create log file" msgstr "無法建立記錄檔" #: nscd/nscd.c:355 nscd/nscd_stat.c:192 #, c-format msgid "write incomplete" msgstr "寫入不完全" #: nscd/nscd.c:366 #, c-format msgid "cannot read invalidate ACK" msgstr "無法讀取設為無效的 ACK" #: nscd/nscd.c:372 #, c-format msgid "invalidation failed" msgstr "無效化失敗" #: nscd/nscd.c:417 nscd/nscd.c:442 nscd/nscd_stat.c:173 #, c-format msgid "Only root is allowed to use this option!" msgstr "只有 root 才可以使用此一選項!" #: nscd/nscd.c:437 #, c-format msgid "'%s' is not a known database" msgstr "『%s』並非一已知資料庫" #: nscd/nscd.c:452 #, c-format msgid "secure services not implemented anymore" msgstr "安全服務不再實作" #: nscd/nscd.c:485 #, fuzzy, c-format #| msgid "" #| "\n" #| "For bug reporting instructions, please see:\n" #| "%s.\n" msgid "" "Supported tables:\n" "%s\n" "\n" "For bug reporting instructions, please see:\n" "%s.\n" msgstr "" "\n" "要知道錯誤報告指令，請參看：\n" "%s。\n" #: nscd/nscd.c:635 #, fuzzy, c-format #| msgid "lstat failed" msgid "'wait' failed\n" msgstr "lstat 失敗" #: nscd/nscd.c:642 #, c-format msgid "child exited with status %d\n" msgstr "" #: nscd/nscd.c:647 #, fuzzy, c-format #| msgid "Interrupted by a signal" msgid "child terminated by signal %d\n" msgstr "由訊號所中斷" #: nscd/nscd_conf.c:54 #, c-format msgid "database %s is not supported" msgstr "資料庫 %s 並未支援" #: nscd/nscd_conf.c:105 #, c-format msgid "Parse error: %s" msgstr "解析錯誤: %s" #: nscd/nscd_conf.c:191 #, c-format msgid "Must specify user name for server-user option" msgstr "必須為伺服器使用者選項指定使用者名稱" #: nscd/nscd_conf.c:198 #, c-format msgid "Must specify user name for stat-user option" msgstr "必須為 stat 使用者選項指定使用者名稱" #: nscd/nscd_conf.c:255 #, c-format msgid "Must specify value for restart-interval option" msgstr "必須指定用於 restart-interval 選項的值" #: nscd/nscd_conf.c:269 #, c-format msgid "Unknown option: %s %s %s" msgstr "未知的選項: %s %s %s" #: nscd/nscd_conf.c:282 #, c-format msgid "cannot get current working directory: %s; disabling paranoia mode" msgstr "無法取得目前的工作目錄：%s; 停用 paranoia 模式" #: nscd/nscd_conf.c:302 #, c-format msgid "maximum file size for %s database too small" msgstr "最大值檔案大小用於 %s 資料庫太小" #: nscd/nscd_stat.c:142 #, c-format msgid "cannot write statistics: %s" msgstr "無法寫入統計資料: %s" #: nscd/nscd_stat.c:157 msgid "yes" msgstr "是" #: nscd/nscd_stat.c:158 msgid "no" msgstr "無" #: nscd/nscd_stat.c:169 #, c-format msgid "Only root or %s is allowed to use this option!" msgstr "只有 root 或 %s 才允許使用此一選項!" #: nscd/nscd_stat.c:180 #, c-format msgid "nscd not running!\n" msgstr "nscd 並沒有在執行!\n" #: nscd/nscd_stat.c:204 #, c-format msgid "cannot read statistics data" msgstr "無法讀取統計資料" #: nscd/nscd_stat.c:207 #, c-format msgid "" "nscd configuration:\n" "\n" "%15d server debug level\n" msgstr "" "nscd 設定:\n" "\n" "%15d 伺服程式錯誤訊息報告等級\n" #: nscd/nscd_stat.c:231 #, c-format msgid "%3ud %2uh %2um %2lus server runtime\n" msgstr "%3ud %2uh %2um %2lus 伺服器 執行時期\n" #: nscd/nscd_stat.c:234 #, c-format msgid " %2uh %2um %2lus server runtime\n" msgstr " %2uh %2um %2lus 伺服器 執行時期\n" #: nscd/nscd_stat.c:236 #, c-format msgid " %2um %2lus server runtime\n" msgstr " %2um %2lus 伺服器 執行時期\n" #: nscd/nscd_stat.c:238 #, c-format msgid " %2lus server runtime\n" msgstr " %2lus 伺服器 執行時期\n" #: nscd/nscd_stat.c:240 #, c-format msgid "" "%15d current number of threads\n" "%15d maximum number of threads\n" "%15lu number of times clients had to wait\n" "%15s paranoia mode enabled\n" "%15lu restart internal\n" "%15u reload count\n" msgstr "" "%15d 目前執行緒數量\n" "%15d 最大執行緒數量\n" "%15lu 客戶端必須等待的次數\n" "%15s paranoia 模式已啟用\n" "%15lu 內部重新啟動\n" "%15u 重新載入計數\n" #: nscd/nscd_stat.c:275 #, c-format msgid "" "\n" "%s cache:\n" "\n" "%15s cache is enabled\n" "%15s cache is persistent\n" "%15s cache is shared\n" "%15zu suggested size\n" "%15zu total data pool size\n" "%15zu used data pool size\n" "%15lu seconds time to live for positive entries\n" "%15lu seconds time to live for negative entries\n" "%15 cache hits on positive entries\n" "%15 cache hits on negative entries\n" "%15 cache misses on positive entries\n" "%15 cache misses on negative entries\n" "%15lu%% cache hit rate\n" "%15zu current number of cached values\n" "%15zu maximum number of cached values\n" "%15zu maximum chain length searched\n" "%15 number of delays on rdlock\n" "%15 number of delays on wrlock\n" "%15 memory allocations failed\n" "%15s check /etc/%s for changes\n" msgstr "" "\n" "%s 快取：\n" "\n" "%15s 快取已啟用\n" "%15s 快取為持續的\n" "%15s 快取為共享\n" "%15zu 建議的大小\n" "%15zu 總計資料儲存池大小\n" "%15zu 使用的資料儲存池大小\n" "%15lu 正項目的存在時間(秒)\n" "%15lu 負項目的存在時間(秒)\n" "%15 正項目中找到快取數\n" "%15 負項目中找到快取數\n" "%15 正項目中遺漏的快取數\n" "%15 負項目中遺漏的快取數\n" "%15lu%% 快取找到的比例\n" "%15zu 目前快取的數量值\n" "%15zu 最大值快取數量值\n" "%15zu 已搜尋最大值鏈接長度\n" "%15 rdlock 延遲數量\n" "%15 wrlock 延遲數量\n" "%15 記憶體配置失敗\n" "%15s 檢查 /etc/%s 的變更\n" #: nscd/pwdcache.c:428 #, c-format msgid "Haven't found \"%s\" in password cache!" msgstr "尚未在密碼快取中找到 \"%s\"!" #: nscd/pwdcache.c:430 #, c-format msgid "Reloading \"%s\" in password cache!" msgstr "重新載入「%s」於密碼快取！" #: nscd/pwdcache.c:511 #, c-format msgid "Invalid numeric uid \"%s\"!" msgstr "無效的 uid 數值 \"%s\"!" #: nscd/selinux.c:155 #, c-format msgid "Failed opening connection to the audit subsystem: %m" msgstr "失敗的開啟連線到稽核子系統：%m" #: nscd/selinux.c:176 msgid "Failed to set keep-capabilities" msgstr "設定功能保持時失敗" #: nscd/selinux.c:177 nscd/selinux.c:240 msgid "prctl(KEEPCAPS) failed" msgstr "prctl(KEEPCAPS) 失敗" #: nscd/selinux.c:191 msgid "Failed to initialize drop of capabilities" msgstr "初始化功能放棄時失敗" #: nscd/selinux.c:192 msgid "cap_init failed" msgstr "cap_init 失敗" #: nscd/selinux.c:213 nscd/selinux.c:230 msgid "Failed to drop capabilities" msgstr "放棄功能時失敗" #: nscd/selinux.c:214 nscd/selinux.c:231 msgid "cap_set_proc failed" msgstr "cap_set_proc 失敗" #: nscd/selinux.c:239 msgid "Failed to unset keep-capabilities" msgstr "解除設定功能保持時失敗" #: nscd/selinux.c:255 msgid "Failed to determine if kernel supports SELinux" msgstr "決定如果內核支援 SELinux 時失敗" #: nscd/selinux.c:270 msgid "Failed to start AVC thread" msgstr "開始 AVC 執行緒時失敗" #: nscd/selinux.c:292 msgid "Failed to create AVC lock" msgstr "建立 AVC 鎖定時失敗" #: nscd/selinux.c:332 msgid "Failed to start AVC" msgstr "啟始 AVC 時失敗" #: nscd/selinux.c:334 msgid "Access Vector Cache (AVC) started" msgstr "存取向量快取 (AVC) 開始" #: nscd/selinux.c:369 msgid "Error querying policy for undefined object classes or permissions." msgstr "" #: nscd/selinux.c:376 #, fuzzy #| msgid "Error getting context of nscd" msgid "Error getting security class for nscd." msgstr "取得 nscd 的狀態組合時發生錯誤" #: nscd/selinux.c:381 #, c-format msgid "Error translating permission name \"%s\" to access vector bit." msgstr "" #: nscd/selinux.c:391 msgid "Error getting context of socket peer" msgstr "取得對等通訊端的狀態組合時發生錯誤" #: nscd/selinux.c:396 msgid "Error getting context of nscd" msgstr "取得 nscd 的狀態組合時發生錯誤" #: nscd/selinux.c:402 msgid "Error getting sid from context" msgstr "從狀態組合取得 sid 時發生錯誤" #: nscd/selinux.c:440 #, c-format msgid "" "\n" "SELinux AVC Statistics:\n" "\n" "%15u entry lookups\n" "%15u entry hits\n" "%15u entry misses\n" "%15u entry discards\n" "%15u CAV lookups\n" "%15u CAV hits\n" "%15u CAV probes\n" "%15u CAV misses\n" msgstr "" "\n" "SELinux AVC 統計：\n" "\n" "%15u 項目查找\n" "%15u 項目符合項目\n" "%15u 項目缺少\n" "%15u 項目捨棄\n" "%15u CAV 查找\n" "%15u CAV 符合項目\n" "%15u CAV 探查\n" "%15u CAV 缺少\n" #: nscd/servicescache.c:387 #, c-format msgid "Haven't found \"%s\" in services cache!" msgstr "尚未在服務快取中找到「%s」!" #: nscd/servicescache.c:389 #, c-format msgid "Reloading \"%s\" in services cache!" msgstr "重新載入「%s」於服務快取！" #: nss/getent.c:53 msgid "database [key ...]" msgstr "資料庫 [鍵值…]" #: nss/getent.c:58 msgid "CONFIG" msgstr "組態" #: nss/getent.c:58 msgid "Service configuration to be used" msgstr "將要使用的服務組態" #: nss/getent.c:59 msgid "disable IDN encoding" msgstr "停用 IDN 編碼" #: nss/getent.c:64 msgid "Get entries from administrative database." msgstr "從管理資料庫取得條目。" #: nss/getent.c:148 nss/getent.c:477 nss/getent.c:522 #, c-format msgid "Enumeration not supported on %s\n" msgstr "此項目在 %s 中不被支援\n" #: nss/getent.c:917 #, c-format msgid "Unknown database name" msgstr "不明的資料庫名稱" #: nss/getent.c:947 msgid "Supported databases:\n" msgstr "支援的資料庫：\n" #: nss/getent.c:1013 #, c-format msgid "Unknown database: %s\n" msgstr "未知的資料庫: %s\n" #: nss/makedb.c:119 msgid "Convert key to lower case" msgstr "轉換鍵轉換為小寫" #: nss/makedb.c:122 msgid "Do not print messages while building database" msgstr "不印出訊息當建立資料庫" #: nss/makedb.c:124 msgid "Print content of database file, one entry a line" msgstr "印出內容的資料庫檔案，一個項目列" #: nss/makedb.c:125 msgid "CHAR" msgstr "字元" #: nss/makedb.c:126 msgid "Generated line not part of iteration" msgstr "產生的列並非迭代的部分" #: nss/makedb.c:131 msgid "Create simple database from textual input." msgstr "從文字輸入建立簡單的資料庫。" #: nss/makedb.c:134 msgid "" "INPUT-FILE OUTPUT-FILE\n" "-o OUTPUT-FILE INPUT-FILE\n" "-u INPUT-FILE" msgstr "" "輸入檔案名稱 輸出檔案名稱\n" "-o 輸出檔案名稱 輸入檔案名稱\n" "-u 輸入檔案名稱" #: nss/makedb.c:227 #, c-format msgid "cannot open database file `%s'" msgstr "無法開啟資料庫檔案 %s" #: nss/makedb.c:272 #, c-format msgid "no entries to be processed" msgstr "沒有條目可供處理" #: nss/makedb.c:282 #, c-format msgid "cannot create temporary file name" msgstr "無法建立暫存檔案名稱" #: nss/makedb.c:288 #, c-format msgid "cannot create temporary file" msgstr "無法產生暫時檔" #: nss/makedb.c:304 #, c-format msgid "cannot stat newly created file" msgstr "無法取得新建立檔案的狀態" #: nss/makedb.c:315 #, c-format msgid "cannot rename temporary file" msgstr "無法重新命名暫存檔案" #: nss/makedb.c:531 nss/makedb.c:554 #, c-format msgid "cannot create search tree" msgstr "無法建立搜尋樹" #: nss/makedb.c:560 msgid "duplicate key" msgstr "重複鍵值" #: nss/makedb.c:572 #, c-format msgid "problems while reading `%s'" msgstr "讀取「%s」時發生問題" #: nss/makedb.c:799 #, c-format msgid "failed to write new database file" msgstr "寫入新資料庫檔案時失敗" #: nss/makedb.c:812 #, c-format msgid "cannot stat database file" msgstr "無法取得資料庫檔案的狀態" #: nss/makedb.c:817 #, c-format msgid "cannot map database file" msgstr "無法映射資料庫檔案" #: nss/makedb.c:820 #, c-format msgid "file not a database file" msgstr "檔案不是資料庫檔案" #: nss/makedb.c:871 #, c-format msgid "cannot set file creation context for `%s'" msgstr "無法為 %s 設定檔案建立語境" #: posix/getconf.c:400 #, c-format msgid "Usage: %s [-v specification] variable_name [pathname]\n" msgstr "用法: %s [-v 規格] 變數名稱 [路徑名稱]\n" #: posix/getconf.c:403 #, c-format msgid " %s -a [pathname]\n" msgstr " %s -a [路徑名稱]\n" #: posix/getconf.c:479 #, c-format msgid "" "Usage: getconf [-v SPEC] VAR\n" " or: getconf [-v SPEC] PATH_VAR PATH\n" "\n" "Get the configuration value for variable VAR, or for variable PATH_VAR\n" "for path PATH. If SPEC is given, give values for compilation\n" "environment SPEC.\n" "\n" msgstr "" "用法：getconf [-v SPEC] VAR\n" " 或： getconf [-v SPEC] PATH_VAR 路徑\n" "\n" "取得變數 VAR 的組態值，或是變數 PATH_VAR\n" "用於路徑 PATH。 如果已提供 SPEC，就給出用於編譯的\n" "環境 SPEC 值。\n" "\n" #: posix/getconf.c:537 #, c-format msgid "unknown specification \"%s\"" msgstr "不明的規格 \"%s\"" #: posix/getconf.c:589 #, c-format msgid "Couldn't execute %s" msgstr "無法執行 %s" #: posix/getconf.c:633 posix/getconf.c:649 msgid "undefined" msgstr "未定義" #: posix/getconf.c:671 #, c-format msgid "Unrecognized variable `%s'" msgstr "無法識別的變數 `%s'" #: posix/getopt.c:592 posix/getopt.c:621 #, c-format msgid "%s: option '%s' is ambiguous; possibilities:" msgstr "%s：選項『%s』是模稜兩可的；可能是：" #: posix/getopt.c:662 posix/getopt.c:666 #, c-format msgid "%s: option '--%s' doesn't allow an argument\n" msgstr "%s: 選項 `--%s' 不允許附加引數\n" #: posix/getopt.c:675 posix/getopt.c:680 #, c-format msgid "%s: option '%c%s' doesn't allow an argument\n" msgstr "%s: 選項 `%c%s' 不允許附加引數\n" #: posix/getopt.c:723 posix/getopt.c:742 #, c-format msgid "%s: option '--%s' requires an argument\n" msgstr "%s：選項『--%s』需要一個引數\n" #: posix/getopt.c:780 posix/getopt.c:783 #, c-format msgid "%s: unrecognized option '--%s'\n" msgstr "%s: 未知的選項 `--%s'\n" #: posix/getopt.c:791 posix/getopt.c:794 #, c-format msgid "%s: unrecognized option '%c%s'\n" msgstr "%s: 未知的選項 `%c%s'\n" #: posix/getopt.c:843 posix/getopt.c:846 #, c-format msgid "%s: invalid option -- '%c'\n" msgstr "%s: 不適用的選項 -- %c\n" #: posix/getopt.c:899 posix/getopt.c:916 posix/getopt.c:1126 #: posix/getopt.c:1144 #, c-format msgid "%s: option requires an argument -- '%c'\n" msgstr "%s: 選項需要一個引數 -- %c\n" #: posix/getopt.c:972 posix/getopt.c:988 #, c-format msgid "%s: option '-W %s' is ambiguous\n" msgstr "%s: 選項 `-W %s' 含義不清\n" #: posix/getopt.c:1012 posix/getopt.c:1030 #, c-format msgid "%s: option '-W %s' doesn't allow an argument\n" msgstr "%s: 選項 `-W %s' 不允許附加引數\n" #: posix/getopt.c:1051 posix/getopt.c:1069 #, c-format msgid "%s: option '-W %s' requires an argument\n" msgstr "%s：選項『-W %s』需要一個引數\n" #: posix/regcomp.c:140 msgid "No match" msgstr "沒有符合的項目" #: posix/regcomp.c:143 msgid "Invalid regular expression" msgstr "不適用的常規表示式" #: posix/regcomp.c:146 msgid "Invalid collation character" msgstr "不適用的對照字元" #: posix/regcomp.c:149 msgid "Invalid character class name" msgstr "不適用的字元類別名" #: posix/regcomp.c:152 msgid "Trailing backslash" msgstr "尾端的反斜線" #: posix/regcomp.c:155 msgid "Invalid back reference" msgstr "不適用的後部索引" #: posix/regcomp.c:158 msgid "Unmatched [ or [^" msgstr "[ 或 [^ 不能匹配" #: posix/regcomp.c:161 msgid "Unmatched ( or \\(" msgstr "( 或 \\( 不能匹配" #: posix/regcomp.c:164 msgid "Unmatched \\{" msgstr "\\{ 不能匹配" #: posix/regcomp.c:167 msgid "Invalid content of \\{\\}" msgstr "不適用的 \\{\\} 內容" #: posix/regcomp.c:170 msgid "Invalid range end" msgstr "不適用的範圍結束" #: posix/regcomp.c:173 msgid "Memory exhausted" msgstr "記憶體用完了" #: posix/regcomp.c:176 msgid "Invalid preceding regular expression" msgstr "不適用的前置常規表示式" #: posix/regcomp.c:179 msgid "Premature end of regular expression" msgstr "常規表示式太早結束了" #: posix/regcomp.c:182 msgid "Regular expression too big" msgstr "正規表示式太長了" #: posix/regcomp.c:185 msgid "Unmatched ) or \\)" msgstr ") 或 \\) 不能匹配" #: posix/regcomp.c:685 msgid "No previous regular expression" msgstr "先前並未使用過常規表示式" #: posix/wordexp.c:1844 msgid "parameter null or not set" msgstr "參數為空字元或是未設置" #: resolv/herror.c:68 msgid "Resolver Error 0 (no error)" msgstr "解讀錯誤碼 0 (沒有錯誤)" #: resolv/herror.c:69 msgid "Unknown host" msgstr "未知的遠端位址" #: resolv/herror.c:70 msgid "Host name lookup failure" msgstr "遠端系統名稱搜尋失敗" #: resolv/herror.c:71 msgid "Unknown server error" msgstr "未知的伺服器錯誤" #: resolv/herror.c:72 msgid "No address associated with name" msgstr "沒有此名稱所對應的位址" #: resolv/herror.c:107 msgid "Resolver internal error" msgstr "內部解讀錯誤" #: resolv/herror.c:110 msgid "Unknown resolver error" msgstr "未知的解讀錯誤" #: resolv/res_hconf.c:125 #, c-format msgid "%s: line %d: cannot specify more than %d trim domains" msgstr "%s: 第 %d 列: 無法指定超過 %d 個修剪範圍" #: resolv/res_hconf.c:146 #, c-format msgid "%s: line %d: list delimiter not followed by domain" msgstr "%s: 第 %d 列: 範圍不可跟在表列分隔字元之後" #: resolv/res_hconf.c:205 #, c-format msgid "%s: line %d: expected `on' or `off', found `%s'\n" msgstr "%s: 第 %d 列: 預期為 `on' 或 `off'，卻發現 `%s'\n" #: resolv/res_hconf.c:248 #, c-format msgid "%s: line %d: bad command `%s'\n" msgstr "%s: 第 %d 列: 不當的命令 `%s'\n" #: resolv/res_hconf.c:283 #, c-format msgid "%s: line %d: ignoring trailing garbage `%s'\n" msgstr "%s: 第 %d 列: 正在忽略尾端的無用資料 `%s'\n" #: stdio-common/psiginfo-data.h:2 msgid "Illegal opcode" msgstr "不合法的 opcode" #: stdio-common/psiginfo-data.h:3 msgid "Illegal operand" msgstr "不合法的運算元" #: stdio-common/psiginfo-data.h:4 msgid "Illegal addressing mode" msgstr "不合法的定址模式" #: stdio-common/psiginfo-data.h:5 msgid "Illegal trap" msgstr "不合法的陷阱" #: stdio-common/psiginfo-data.h:6 msgid "Privileged opcode" msgstr "需要權限的 opcode" #: stdio-common/psiginfo-data.h:7 msgid "Privileged register" msgstr "需要權限的暫存器" #: stdio-common/psiginfo-data.h:8 msgid "Coprocessor error" msgstr "輔助處理器錯誤" #: stdio-common/psiginfo-data.h:9 msgid "Internal stack error" msgstr "內部堆疊錯誤" #: stdio-common/psiginfo-data.h:12 msgid "Integer divide by zero" msgstr "整數被零除" #: stdio-common/psiginfo-data.h:13 msgid "Integer overflow" msgstr "整數溢位" #: stdio-common/psiginfo-data.h:14 msgid "Floating-point divide by zero" msgstr "浮點數被零除" #: stdio-common/psiginfo-data.h:15 msgid "Floating-point overflow" msgstr "浮點數溢位" #: stdio-common/psiginfo-data.h:16 msgid "Floating-point underflow" msgstr "浮點數下限溢位" #: stdio-common/psiginfo-data.h:17 msgid "Floating-poing inexact result" msgstr "不精確的浮點數結果" #: stdio-common/psiginfo-data.h:18 msgid "Invalid floating-point operation" msgstr "無效的浮點數操作" #: stdio-common/psiginfo-data.h:19 msgid "Subscript out of range" msgstr "註標超出範圍" #: stdio-common/psiginfo-data.h:22 msgid "Address not mapped to object" msgstr "位址沒有映射到物件" #: stdio-common/psiginfo-data.h:23 msgid "Invalid permissions for mapped object" msgstr "對於映射物件的權限無效" #: stdio-common/psiginfo-data.h:26 msgid "Invalid address alignment" msgstr "無效的位址對齊" #: stdio-common/psiginfo-data.h:27 msgid "Nonexisting physical address" msgstr "不存在的實體位址" #: stdio-common/psiginfo-data.h:28 msgid "Object-specific hardware error" msgstr "物件特定的硬體錯誤" #: stdio-common/psiginfo-data.h:31 msgid "Process breakpoint" msgstr "行程中斷點" #: stdio-common/psiginfo-data.h:32 msgid "Process trace trap" msgstr "行程追蹤陷阱" #: stdio-common/psiginfo-data.h:35 msgid "Child has exited" msgstr "子行程已結束" #: stdio-common/psiginfo-data.h:36 msgid "Child has terminated abnormally and did not create a core file" msgstr "子行程已異常終止且未建立記憶體檔案" #: stdio-common/psiginfo-data.h:37 #, fuzzy #| msgid "Child hat terminated abnormally and created a core file" msgid "Child has terminated abnormally and created a core file" msgstr "子行程已異常終止並已建立了記憶體檔案" #: stdio-common/psiginfo-data.h:38 msgid "Traced child has trapped" msgstr "追蹤的子行程已落入陷阱" #: stdio-common/psiginfo-data.h:39 msgid "Child has stopped" msgstr "子行程已停止" #: stdio-common/psiginfo-data.h:40 msgid "Stopped child has continued" msgstr "停止的子行程已繼續" #: stdio-common/psiginfo-data.h:43 msgid "Data input available" msgstr "資料輸入可用" #: stdio-common/psiginfo-data.h:44 msgid "Output buffers available" msgstr "輸出緩衝區可用" #: stdio-common/psiginfo-data.h:45 msgid "Input message available" msgstr "輸入訊息可用" #: stdio-common/psiginfo-data.h:46 msgid "I/O error" msgstr "I/O 錯誤" #: stdio-common/psiginfo-data.h:47 msgid "High priority input available" msgstr "高優先權輸入可用" #: stdio-common/psiginfo-data.h:48 msgid "Device disconnected" msgstr "裝置已經結束連線" #: stdio-common/psiginfo.c:139 msgid "Signal sent by kill()" msgstr "kill() 已發送信號" #: stdio-common/psiginfo.c:142 msgid "Signal sent by sigqueue()" msgstr "sigqueue() 已發送信號" #: stdio-common/psiginfo.c:145 msgid "Signal generated by the expiration of a timer" msgstr "計時器的逾期已產生信號" #: stdio-common/psiginfo.c:148 msgid "Signal generated by the completion of an asynchronous I/O request" msgstr "非同步 I/O 要求的完成已產生信號" #: stdio-common/psiginfo.c:152 msgid "Signal generated by the arrival of a message on an empty message queue" msgstr "空訊息佇列中到達的訊息已產生信號" #: stdio-common/psiginfo.c:157 msgid "Signal sent by tkill()" msgstr "tkill() 已發送信號" #: stdio-common/psiginfo.c:162 msgid "Signal generated by the completion of an asynchronous name lookup request" msgstr "非同步名稱查找要求的完成已產生信號" #: stdio-common/psiginfo.c:168 msgid "Signal generated by the completion of an I/O request" msgstr "I/O 要求的完成已產生信號" #: stdio-common/psiginfo.c:174 msgid "Signal sent by the kernel" msgstr "內核已發送信號" #: stdio-common/psiginfo.c:198 #, c-format msgid "Unknown signal %d\n" msgstr "不明信號 %d\n" #: stdio-common/psignal.c:43 #, c-format msgid "%s%sUnknown signal %d\n" msgstr "%s%s未知的信號 %d\n" #: stdio-common/psignal.c:44 msgid "Unknown signal" msgstr "不明的信號" #: string/_strerror.c:45 sysdeps/mach/_strerror.c:86 msgid "Unknown error " msgstr "未知的錯誤 " #: string/strerror.c:42 msgid "Unknown error" msgstr "未知的錯誤" #: string/strsignal.c:60 #, c-format msgid "Real-time signal %d" msgstr "即時的信號 %d" #: string/strsignal.c:64 #, c-format msgid "Unknown signal %d" msgstr "未知的信號 %d" #: sunrpc/auth_unix.c:111 sunrpc/clnt_tcp.c:123 sunrpc/clnt_udp.c:135 #: sunrpc/clnt_unix.c:124 sunrpc/svc_tcp.c:188 sunrpc/svc_tcp.c:233 #: sunrpc/svc_udp.c:162 sunrpc/svc_unix.c:188 sunrpc/svc_unix.c:229 #: sunrpc/xdr.c:631 sunrpc/xdr.c:793 sunrpc/xdr_array.c:97 #: sunrpc/xdr_rec.c:152 sunrpc/xdr_ref.c:76 msgid "out of memory\n" msgstr "記憶體不足\n" #: sunrpc/auth_unix.c:349 msgid "auth_unix.c: Fatal marshalling problem" msgstr "auth_unix.c: 嚴重的編組問題" #: sunrpc/clnt_perr.c:95 sunrpc/clnt_perr.c:111 #, c-format msgid "%s: %s; low version = %lu, high version = %lu" msgstr "%s: %s; 低版本 = %lu，高版本 = %lu" #: sunrpc/clnt_perr.c:102 #, c-format msgid "%s: %s; why = %s\n" msgstr "%s: %s; 原因 = %s\n" #: sunrpc/clnt_perr.c:104 #, c-format msgid "%s: %s; why = (unknown authentication error - %d)\n" msgstr "%s: %s; 原因 = (不明的認證錯誤 - %d)\n" #: sunrpc/clnt_perr.c:153 msgid "RPC: Success" msgstr "RPC: 成功" #: sunrpc/clnt_perr.c:156 msgid "RPC: Can't encode arguments" msgstr "RPC: 無法將引數編碼" #: sunrpc/clnt_perr.c:160 msgid "RPC: Can't decode result" msgstr "RPC: 無法解碼得出結果" #: sunrpc/clnt_perr.c:164 msgid "RPC: Unable to send" msgstr "RPC: 無法傳送" #: sunrpc/clnt_perr.c:168 msgid "RPC: Unable to receive" msgstr "RPC: 無法接收" #: sunrpc/clnt_perr.c:172 msgid "RPC: Timed out" msgstr "RPC: 超過時間上限" #: sunrpc/clnt_perr.c:176 msgid "RPC: Incompatible versions of RPC" msgstr "RPC: RPC 版本不相容" #: sunrpc/clnt_perr.c:180 msgid "RPC: Authentication error" msgstr "RPC: 認證錯誤" #: sunrpc/clnt_perr.c:184 msgid "RPC: Program unavailable" msgstr "RPC: 程式不存在" #: sunrpc/clnt_perr.c:188 msgid "RPC: Program/version mismatch" msgstr "RPC: 程式/版本不符" #: sunrpc/clnt_perr.c:192 msgid "RPC: Procedure unavailable" msgstr "RPC: 無法取得程序" #: sunrpc/clnt_perr.c:196 msgid "RPC: Server can't decode arguments" msgstr "RPC: 伺服器無法將引數解碼" #: sunrpc/clnt_perr.c:200 msgid "RPC: Remote system error" msgstr "RPC: 遠端程式錯誤" #: sunrpc/clnt_perr.c:204 msgid "RPC: Unknown host" msgstr "RPC: 未知的遠端位址" #: sunrpc/clnt_perr.c:208 msgid "RPC: Unknown protocol" msgstr "RPC: 未知的協定" #: sunrpc/clnt_perr.c:212 msgid "RPC: Port mapper failure" msgstr "RPC: 通訊阜對映錯誤" #: sunrpc/clnt_perr.c:216 msgid "RPC: Program not registered" msgstr "RPC: 程式沒有註冊" #: sunrpc/clnt_perr.c:220 msgid "RPC: Failed (unspecified error)" msgstr "RPC: 失敗 (非特定的錯誤)" #: sunrpc/clnt_perr.c:261 msgid "RPC: (unknown error code)" msgstr "RPC: (未知的錯誤碼)" #: sunrpc/clnt_perr.c:333 msgid "Authentication OK" msgstr "鑑定完成" #: sunrpc/clnt_perr.c:336 msgid "Invalid client credential" msgstr "不適用的請求端身分認證" #: sunrpc/clnt_perr.c:340 msgid "Server rejected credential" msgstr "伺服器拒絕身分證明" #: sunrpc/clnt_perr.c:344 msgid "Invalid client verifier" msgstr "不適用的請求端認證" #: sunrpc/clnt_perr.c:348 msgid "Server rejected verifier" msgstr "伺服器拒絕認證" #: sunrpc/clnt_perr.c:352 msgid "Client credential too weak" msgstr "用戶端背景太弱" #: sunrpc/clnt_perr.c:356 msgid "Invalid server verifier" msgstr "不適用的服務認證" #: sunrpc/clnt_perr.c:360 msgid "Failed (unspecified error)" msgstr "失敗 (無特定的錯誤)" #: sunrpc/clnt_raw.c:115 msgid "clnt_raw.c: fatal header serialization error" msgstr "clnt_raw.c: 嚴重的標頭序列化錯誤" #: sunrpc/pm_getmaps.c:77 msgid "pmap_getmaps.c: rpc problem" msgstr "pmap_getmaps.c: 遠端程序呼叫問題" #: sunrpc/pmap_clnt.c:127 msgid "Cannot register service" msgstr "無法註冊服務" #: sunrpc/pmap_rmt.c:243 msgid "Cannot create socket for broadcast rpc" msgstr "無法為廣播式遠端程序呼叫 (broadcast rpc) 產生 socket" #: sunrpc/pmap_rmt.c:250 msgid "Cannot set socket option SO_BROADCAST" msgstr "無法設定 socket 選項 SO_BROADCAST" #: sunrpc/pmap_rmt.c:302 msgid "Cannot send broadcast packet" msgstr "無法傳送廣播封包" #: sunrpc/pmap_rmt.c:327 msgid "Broadcast poll problem" msgstr "Broadcast 調查有問題" #: sunrpc/pmap_rmt.c:340 msgid "Cannot receive reply to broadcast" msgstr "無法接受廣播後的回應" #: sunrpc/rpc_main.c:281 #, c-format msgid "%s: output would overwrite %s\n" msgstr "%s: 輸出將會覆蓋 %s\n" #: sunrpc/rpc_main.c:288 #, c-format msgid "%s: unable to open %s: %m\n" msgstr "%s: 無法開啟 %s: %m\n" #: sunrpc/rpc_main.c:300 #, c-format msgid "%s: while writing output %s: %m" msgstr "%s: 當在寫出輸出 %s 時: %m" #: sunrpc/rpc_main.c:336 sunrpc/rpc_main.c:375 #, c-format msgid "cannot find C preprocessor: %s\n" msgstr "找不到 C 前置處理器：%s\n" #: sunrpc/rpc_main.c:411 #, c-format msgid "%s: C preprocessor failed with signal %d\n" msgstr "%s: C 前置處理器失效，其訊號值為 %d\n" #: sunrpc/rpc_main.c:414 #, c-format msgid "%s: C preprocessor failed with exit code %d\n" msgstr "%s: C 前置處理器失效，其結束碼為 %d\n" #: sunrpc/rpc_main.c:454 #, c-format msgid "illegal nettype: `%s'\n" msgstr "不合法的 nettype：「%s」\n" #: sunrpc/rpc_main.c:1089 #, c-format msgid "rpcgen: too many defines\n" msgstr "rpcgen: 太多 define 了\n" #: sunrpc/rpc_main.c:1101 #, c-format msgid "rpcgen: arglist coding error\n" msgstr "rpcgen: arglist 編碼錯誤\n" #. TRANS: the file will not be removed; this is an #. TRANS: informative message. #: sunrpc/rpc_main.c:1134 #, c-format msgid "file `%s' already exists and may be overwritten\n" msgstr "檔案 `%s' 已經存在並有可能會被覆蓋掉\n" #: sunrpc/rpc_main.c:1179 #, c-format msgid "Cannot specify more than one input file!\n" msgstr "無法指定超過一個輸入檔!\n" #: sunrpc/rpc_main.c:1349 #, c-format msgid "This implementation doesn't support newstyle or MT-safe code!\n" msgstr "此實作方式不支援新的形式或多安全執行序的程式!\n" #: sunrpc/rpc_main.c:1358 #, c-format msgid "Cannot use netid flag with inetd flag!\n" msgstr "無法將 netid 旗標與 inetd 旗標一起使用!\n" #: sunrpc/rpc_main.c:1367 #, c-format msgid "Cannot use netid flag without TIRPC!\n" msgstr "無法在沒有 TIRPC 時使用 netid 旗標!\n" #: sunrpc/rpc_main.c:1374 #, c-format msgid "Cannot use table flags with newstyle!\n" msgstr "無法將表格旗標與 newstyle 一起使用!\n" #: sunrpc/rpc_main.c:1393 #, c-format msgid "\"infile\" is required for template generation flags.\n" msgstr "\"infile\" 是樣版產生旗標所需的\n" #: sunrpc/rpc_main.c:1398 #, c-format msgid "Cannot have more than one file generation flag!\n" msgstr "無法使用超過一個的檔案產生旗標!\n" #: sunrpc/rpc_main.c:1407 #, c-format msgid "usage: %s infile\n" msgstr "用法: %s infile\n" #: sunrpc/rpc_main.c:1408 #, c-format msgid "\t%s [-abkCLNTM][-Dname[=value]] [-i size] [-I [-K seconds]] [-Y path] infile\n" msgstr "\t%s [-abkCLNTM][-D名稱[=值]] [-i 大小] [-I [-K 秒數]] [-Y 路徑] 輸入檔案\n" #: sunrpc/rpc_main.c:1410 #, c-format msgid "\t%s [-c | -h | -l | -m | -t | -Sc | -Ss | -Sm] [-o outfile] [infile]\n" msgstr "\t%s [-c | -h | -l | -m | -t | -Sc | -Ss | -Sm] [-o 輸出檔案] [輸入檔案]\n" #: sunrpc/rpc_main.c:1412 #, c-format msgid "\t%s [-s nettype]* [-o outfile] [infile]\n" msgstr "\t%s [-s 網路型態]* [-o 輸出檔案] [輸入檔案]\n" #: sunrpc/rpc_main.c:1413 #, c-format msgid "\t%s [-n netid]* [-o outfile] [infile]\n" msgstr "\t%s [-n 網路識別符號]* [-o 輸出檔案] [輸入檔案]\n" #: sunrpc/rpc_main.c:1421 #, c-format msgid "options:\n" msgstr "選項：\n" #: sunrpc/rpc_main.c:1422 #, c-format msgid "-a\t\tgenerate all files, including samples\n" msgstr "-a\t\t產生所有檔案，包含樣本\n" #: sunrpc/rpc_main.c:1423 #, c-format msgid "-b\t\tbackward compatibility mode (generates code for SunOS 4.1)\n" msgstr "-b\t\t回溯相容模式 (產生用於 SunOS 4.1 的編碼)\n" #: sunrpc/rpc_main.c:1424 #, c-format msgid "-c\t\tgenerate XDR routines\n" msgstr "-c\t\t產生 XDR 常式\n" #: sunrpc/rpc_main.c:1425 #, c-format msgid "-C\t\tANSI C mode\n" msgstr "-C\t\tANSI C 模式\n" #: sunrpc/rpc_main.c:1426 #, c-format msgid "-Dname[=value]\tdefine a symbol (same as #define)\n" msgstr "-D名稱[=值]\t定義一個符號 (如同 #define)\n" #: sunrpc/rpc_main.c:1427 #, c-format msgid "-h\t\tgenerate header file\n" msgstr "-h\t\t產生標頭檔\n" #: sunrpc/rpc_main.c:1428 #, c-format msgid "-i size\t\tsize at which to start generating inline code\n" msgstr "-i 大小\t\t啟始產生內聯編碼的大小\n" #: sunrpc/rpc_main.c:1429 #, c-format msgid "-I\t\tgenerate code for inetd support in server (for SunOS 4.1)\n" msgstr "-I\t\t產生在伺服器中支援的 inetd 編碼 (用於 SunOS 4.1)\n" #: sunrpc/rpc_main.c:1430 #, c-format msgid "-K seconds\tserver exits after K seconds of inactivity\n" msgstr "-K 秒\t不作用 K 秒之後離開伺服器\n" #: sunrpc/rpc_main.c:1431 #, c-format msgid "-l\t\tgenerate client side stubs\n" msgstr "-l\t\t產生客戶端殘餘\n" #: sunrpc/rpc_main.c:1432 #, c-format msgid "-L\t\tserver errors will be printed to syslog\n" msgstr "-L\t\t伺服器錯誤將被列印到 syslog\n" #: sunrpc/rpc_main.c:1433 #, c-format msgid "-m\t\tgenerate server side stubs\n" msgstr "-m\t\t產生伺服器端殘餘\n" #: sunrpc/rpc_main.c:1434 #, c-format msgid "-M\t\tgenerate MT-safe code\n" msgstr "-M\t\t產生 MT-safe 編碼\n" #: sunrpc/rpc_main.c:1435 #, c-format msgid "-n netid\tgenerate server code that supports named netid\n" msgstr "-n netid\t產生支援具名 netid 的伺服器編碼\n" #: sunrpc/rpc_main.c:1436 #, c-format msgid "-N\t\tsupports multiple arguments and call-by-value\n" msgstr "-N\t\t支援多重引數和傳值呼叫\n" #: sunrpc/rpc_main.c:1437 #, c-format msgid "-o outfile\tname of the output file\n" msgstr "-o 輸出檔\t輸出檔案的名稱\n" #: sunrpc/rpc_main.c:1438 #, c-format msgid "-s nettype\tgenerate server code that supports named nettype\n" msgstr "-s nettype\t產生支援具名 nettype 的伺服器編碼\n" #: sunrpc/rpc_main.c:1439 #, c-format msgid "-Sc\t\tgenerate sample client code that uses remote procedures\n" msgstr "-Sc\t\t產生使用遠端程序的範例客戶端編碼\n" #: sunrpc/rpc_main.c:1440 #, c-format msgid "-Ss\t\tgenerate sample server code that defines remote procedures\n" msgstr "-Ss\t\t產生定義遠端程序的範例伺服器編碼\n" #: sunrpc/rpc_main.c:1441 #, c-format msgid "-Sm \t\tgenerate makefile template \n" msgstr "-Sm\t\t產生 makefile 模板\n" #: sunrpc/rpc_main.c:1442 #, c-format msgid "-t\t\tgenerate RPC dispatch table\n" msgstr "-t\t\t產生 RPC 派送表\n" #: sunrpc/rpc_main.c:1443 #, c-format msgid "-T\t\tgenerate code to support RPC dispatch tables\n" msgstr "-T\t\t產生支援 RPC 派送表的編碼\n" #: sunrpc/rpc_main.c:1444 #, c-format msgid "-Y path\t\tdirectory name to find C preprocessor (cpp)\n" msgstr "-Y 路徑\t\t要尋找 C 前置處理器 (cpp) 的目錄名稱\n" #: sunrpc/rpc_main.c:1445 #, c-format msgid "-5\t\tSysVr4 compatibility mode\n" msgstr "" #: sunrpc/rpc_main.c:1446 #, fuzzy, c-format #| msgid "Give this help list" msgid "--help\t\tgive this help list\n" msgstr "給出這個使用方式列表" #: sunrpc/rpc_main.c:1447 #, fuzzy, c-format #| msgid "Print program version" msgid "--version\tprint program version\n" msgstr "印出程式版本" #: sunrpc/rpc_main.c:1449 #, c-format msgid "" "\n" "For bug reporting instructions, please see:\n" "%s.\n" msgstr "" "\n" "要知道錯誤報告指令，請參看：\n" "%s。\n" #: sunrpc/rpc_scan.c:112 msgid "constant or identifier expected" msgstr "應該要有常數或識別符號才對" #: sunrpc/rpc_scan.c:308 msgid "illegal character in file: " msgstr "檔案中有不合法的字元: " #: sunrpc/rpc_scan.c:347 sunrpc/rpc_scan.c:373 msgid "unterminated string constant" msgstr "沒有結尾的字串常數" #: sunrpc/rpc_scan.c:379 msgid "empty char string" msgstr "空的字元字串" #: sunrpc/rpc_scan.c:521 sunrpc/rpc_scan.c:531 msgid "preprocessor error" msgstr "前置處理器錯誤" #: sunrpc/rpcinfo.c:246 sunrpc/rpcinfo.c:392 #, c-format msgid "program %lu is not available\n" msgstr "程式 %lu 不存在\n" #: sunrpc/rpcinfo.c:273 sunrpc/rpcinfo.c:319 sunrpc/rpcinfo.c:342 #: sunrpc/rpcinfo.c:416 sunrpc/rpcinfo.c:462 sunrpc/rpcinfo.c:485 #: sunrpc/rpcinfo.c:519 #, c-format msgid "program %lu version %lu is not available\n" msgstr "程式 %lu 的第 %lu 版並不存在\n" #: sunrpc/rpcinfo.c:524 #, c-format msgid "program %lu version %lu ready and waiting\n" msgstr "程式 %lu 的第 %lu 版已經就緒並等待服務中\n" #: sunrpc/rpcinfo.c:565 sunrpc/rpcinfo.c:572 msgid "rpcinfo: can't contact portmapper" msgstr "rpcinfo: 無法建立跟 portmapper 之間的連線" #: sunrpc/rpcinfo.c:579 msgid "No remote programs registered.\n" msgstr "沒有註冊過的遠端應用程式\n" #: sunrpc/rpcinfo.c:583 msgid " program vers proto port\n" msgstr " 程式採用的協定連接阜\n" #: sunrpc/rpcinfo.c:622 msgid "(unknown)" msgstr "(未知)" #: sunrpc/rpcinfo.c:646 #, c-format msgid "rpcinfo: broadcast failed: %s\n" msgstr "rpcinfo: 廣播失敗: %s\n" #: sunrpc/rpcinfo.c:667 msgid "Sorry. You are not root\n" msgstr "不好意思，你並不是 root 使用者\n" #: sunrpc/rpcinfo.c:674 #, c-format msgid "rpcinfo: Could not delete registration for prog %s version %s\n" msgstr "rpcinfo: 無法刪除程式 %s (第 %s 版) 的註冊資料\n" #: sunrpc/rpcinfo.c:683 msgid "Usage: rpcinfo [ -n portnum ] -u host prognum [ versnum ]\n" msgstr "使用方式: rpcinfo [ -n portnum ] -u host prognum [ versnum ]\n" #: sunrpc/rpcinfo.c:685 msgid " rpcinfo [ -n portnum ] -t host prognum [ versnum ]\n" msgstr " rpcinfo [ -n portnum ] -t host prognum [ versnum ]\n" #: sunrpc/rpcinfo.c:687 msgid " rpcinfo -p [ host ]\n" msgstr " rpcinfo -p [ host ]\n" #: sunrpc/rpcinfo.c:688 msgid " rpcinfo -b prognum versnum\n" msgstr " rpcinfo -b prognum versnum\n" #: sunrpc/rpcinfo.c:689 msgid " rpcinfo -d prognum versnum\n" msgstr " rpcinfo -d prognum versnum\n" #: sunrpc/rpcinfo.c:714 #, c-format msgid "rpcinfo: %s is unknown service\n" msgstr "rpcinfo: %s 是不明的服務\n" #: sunrpc/rpcinfo.c:751 #, c-format msgid "rpcinfo: %s is unknown host\n" msgstr "rpcinfo: %s 是不明的主機\n" #: sunrpc/svc_run.c:71 msgid "svc_run: - out of memory" msgstr "svc_run：- 記憶體不足" #: sunrpc/svc_run.c:91 msgid "svc_run: - poll failed" msgstr "svc_run: - poll 失敗" #: sunrpc/svc_simple.c:80 #, c-format msgid "can't reassign procedure number %ld\n" msgstr "不能重複指定程序號碼 %ld\n" #: sunrpc/svc_simple.c:90 msgid "couldn't create an rpc server\n" msgstr "不能產生遠端程序呼叫伺服程式\n" #: sunrpc/svc_simple.c:98 #, c-format msgid "couldn't register prog %ld vers %ld\n" msgstr "不能將程式 %ld 註冊到 %ld\n" #: sunrpc/svc_simple.c:106 msgid "registerrpc: out of memory\n" msgstr "registerrpc: 記憶體不足\n" #: sunrpc/svc_simple.c:169 #, c-format msgid "trouble replying to prog %d\n" msgstr "回應程式 %d 時發生困難\n" #: sunrpc/svc_simple.c:178 #, c-format msgid "never registered prog %d\n" msgstr "千萬不要註冊程式 %d\n" #: sunrpc/svc_tcp.c:164 msgid "svc_tcp.c - tcp socket creation problem" msgstr "svc_tcp.c - tcp socket 建立發生問題" #: sunrpc/svc_tcp.c:179 msgid "svc_tcp.c - cannot getsockname or listen" msgstr "svc_tcp.c - 無法 getsockname 或 listen" #: sunrpc/svc_udp.c:137 msgid "svcudp_create: socket creation problem" msgstr "svcudp_create: socket 建立有問題" #: sunrpc/svc_udp.c:151 msgid "svcudp_create - cannot getsockname" msgstr "svcudp_create - 無法 getsockname" #: sunrpc/svc_udp.c:183 msgid "svcudp_create: xp_pad is too small for IP_PKTINFO\n" msgstr "svcudp_create: xp_pad 太小以致於無法 IP_PKTINFO\n" #: sunrpc/svc_udp.c:495 msgid "enablecache: cache already enabled" msgstr "enablecache: 快取已經開啟" #: sunrpc/svc_udp.c:501 msgid "enablecache: could not allocate cache" msgstr "enablecache: 無法配置快取" #: sunrpc/svc_udp.c:510 msgid "enablecache: could not allocate cache data" msgstr "enablecache: 無法配置快取資料" #: sunrpc/svc_udp.c:518 msgid "enablecache: could not allocate cache fifo" msgstr "enablecache: 無法配置快取 fifo 管線" #: sunrpc/svc_udp.c:554 msgid "cache_set: victim not found" msgstr "cache_set: 找不到 victim" #: sunrpc/svc_udp.c:565 msgid "cache_set: victim alloc failed" msgstr "cache_set: victim 配置失敗" #: sunrpc/svc_udp.c:572 msgid "cache_set: could not allocate new rpc_buffer" msgstr "cache_set: 無法配置新的遠端程序呼叫緩衝區 (rpc_buffer)" #: sunrpc/svc_unix.c:162 msgid "svc_unix.c - AF_UNIX socket creation problem" msgstr "svc_unix.c - AF_UNIX socket 建立有問題" #: sunrpc/svc_unix.c:178 msgid "svc_unix.c - cannot getsockname or listen" msgstr "svc_unix.c - 無法 getsockname 或 listen" #: sysdeps/generic/siglist.h:28 msgid "Hangup" msgstr "掛斷" #: sysdeps/generic/siglist.h:29 msgid "Interrupt" msgstr "中斷" #: sysdeps/generic/siglist.h:30 msgid "Quit" msgstr "離開" #: sysdeps/generic/siglist.h:31 msgid "Illegal instruction" msgstr "不合法的命令" #: sysdeps/generic/siglist.h:32 msgid "Trace/breakpoint trap" msgstr "追蹤與中斷點陷阱" #: sysdeps/generic/siglist.h:33 msgid "Aborted" msgstr "已經終止" #: sysdeps/generic/siglist.h:34 msgid "Floating point exception" msgstr "浮點數出錯" #: sysdeps/generic/siglist.h:35 msgid "Killed" msgstr "已砍掉" #: sysdeps/generic/siglist.h:36 msgid "Bus error" msgstr "匯流排錯誤" #: sysdeps/generic/siglist.h:37 msgid "Segmentation fault" msgstr "程式記憶體區段錯誤" #. TRANS Broken pipe; there is no process reading from the other end of a pipe. #. TRANS Every library function that returns this error code also generates a #. TRANS @code{SIGPIPE} signal; this signal terminates the program if not handled #. TRANS or blocked. Thus, your program will never actually see @code{EPIPE} #. TRANS unless it has handled or blocked @code{SIGPIPE}. #: sysdeps/generic/siglist.h:38 sysdeps/gnu/errlist.c:360 msgid "Broken pipe" msgstr "中斷的管線" #: sysdeps/generic/siglist.h:39 msgid "Alarm clock" msgstr "鬧鐘" #: sysdeps/generic/siglist.h:40 msgid "Terminated" msgstr "終止" #: sysdeps/generic/siglist.h:41 msgid "Urgent I/O condition" msgstr "緊急的輸出入狀態" #: sysdeps/generic/siglist.h:42 msgid "Stopped (signal)" msgstr "停止 (信號)" #: sysdeps/generic/siglist.h:43 msgid "Stopped" msgstr "停止" #: sysdeps/generic/siglist.h:44 msgid "Continued" msgstr "繼續" #: sysdeps/generic/siglist.h:45 msgid "Child exited" msgstr "子行程結束" #: sysdeps/generic/siglist.h:46 msgid "Stopped (tty input)" msgstr "停止 (tty 輸入)" #: sysdeps/generic/siglist.h:47 msgid "Stopped (tty output)" msgstr "停止 (tty 輸出)" #: sysdeps/generic/siglist.h:48 msgid "I/O possible" msgstr "I/O 可行" #: sysdeps/generic/siglist.h:49 msgid "CPU time limit exceeded" msgstr "CPU 時間上限超過了" #: sysdeps/generic/siglist.h:50 msgid "File size limit exceeded" msgstr "檔案大小超過上限" #: sysdeps/generic/siglist.h:51 msgid "Virtual timer expired" msgstr "虛擬計時器已過時取消了" #: sysdeps/generic/siglist.h:52 msgid "Profiling timer expired" msgstr "測速評估用的計時器已過時取消了" #: sysdeps/generic/siglist.h:53 msgid "User defined signal 1" msgstr "使用者定義的訊號 1" #: sysdeps/generic/siglist.h:54 msgid "User defined signal 2" msgstr "使用者定義的訊號 2" #: sysdeps/generic/siglist.h:58 msgid "EMT trap" msgstr "EMT 陷阱" #: sysdeps/generic/siglist.h:61 msgid "Bad system call" msgstr "錯誤的系統呼叫" #: sysdeps/generic/siglist.h:64 msgid "Stack fault" msgstr "堆疊錯誤" #: sysdeps/generic/siglist.h:67 msgid "Information request" msgstr "需要資料" #: sysdeps/generic/siglist.h:69 msgid "Power failure" msgstr "電源嚴重錯誤" #: sysdeps/generic/siglist.h:72 msgid "Resource lost" msgstr "資源漏失" #: sysdeps/generic/siglist.h:75 msgid "Window changed" msgstr "範圍改變了" #. TRANS Operation not permitted; only the owner of the file (or other resource) #. TRANS or processes with special privileges can perform the operation. #: sysdeps/gnu/errlist.c:26 msgid "Operation not permitted" msgstr "此項操作並不被允許" #. TRANS No process matches the specified process ID. #: sysdeps/gnu/errlist.c:46 msgid "No such process" msgstr "沒有此一程序" #. TRANS Interrupted function call; an asynchronous signal occurred and prevented #. TRANS completion of the call. When this happens, you should try the call #. TRANS again. #. TRANS #. TRANS You can choose to have functions resume after a signal that is handled, #. TRANS rather than failing with @code{EINTR}; see @ref{Interrupted #. TRANS Primitives}. #: sysdeps/gnu/errlist.c:61 msgid "Interrupted system call" msgstr "中斷的系統呼叫" #. TRANS Input/output error; usually used for physical read or write errors. #: sysdeps/gnu/errlist.c:70 msgid "Input/output error" msgstr "輸入/輸出錯誤" #. TRANS No such device or address. The system tried to use the device #. TRANS represented by a file you specified, and it couldn't find the device. #. TRANS This can mean that the device file was installed incorrectly, or that #. TRANS the physical device is missing or not correctly attached to the #. TRANS computer. #: sysdeps/gnu/errlist.c:83 msgid "No such device or address" msgstr "沒有此一裝置或位址" #. TRANS Argument list too long; used when the arguments passed to a new program #. TRANS being executed with one of the @code{exec} functions (@pxref{Executing a #. TRANS File}) occupy too much memory space. This condition never arises on #. TRANS @gnuhurdsystems{}. #: sysdeps/gnu/errlist.c:95 msgid "Argument list too long" msgstr "引數列項目過長" #. TRANS Invalid executable file format. This condition is detected by the #. TRANS @code{exec} functions; see @ref{Executing a File}. #: sysdeps/gnu/errlist.c:105 msgid "Exec format error" msgstr "可執行檔格式錯誤" #. TRANS Bad file descriptor; for example, I/O on a descriptor that has been #. TRANS closed or reading from a descriptor open only for writing (or vice #. TRANS versa). #: sysdeps/gnu/errlist.c:116 msgid "Bad file descriptor" msgstr "錯誤的檔案敘述項" #. TRANS There are no child processes. This error happens on operations that are #. TRANS supposed to manipulate child processes, when there aren't any processes #. TRANS to manipulate. #: sysdeps/gnu/errlist.c:127 msgid "No child processes" msgstr "沒有子程序存在" #. TRANS Deadlock avoided; allocating a system resource would have resulted in a #. TRANS deadlock situation. The system does not guarantee that it will notice #. TRANS all such situations. This error means you got lucky and the system #. TRANS noticed; it might just hang. @xref{File Locks}, for an example. #: sysdeps/gnu/errlist.c:139 msgid "Resource deadlock avoided" msgstr "避開資源鎖定" #. TRANS No memory available. The system cannot allocate more virtual memory #. TRANS because its capacity is full. #: sysdeps/gnu/errlist.c:149 msgid "Cannot allocate memory" msgstr "無法配置記憶體" #. TRANS Bad address; an invalid pointer was detected. #. TRANS On @gnuhurdsystems{}, this error never happens; you get a signal instead. #: sysdeps/gnu/errlist.c:168 msgid "Bad address" msgstr "錯誤的位址" #. TRANS A file that isn't a block special file was given in a situation that #. TRANS requires one. For example, trying to mount an ordinary file as a file #. TRANS system in Unix gives this error. #: sysdeps/gnu/errlist.c:179 msgid "Block device required" msgstr "必須是區塊裝置 (Block device)" #. TRANS Resource busy; a system resource that can't be shared is already in use. #. TRANS For example, if you try to delete a file that is the root of a currently #. TRANS mounted filesystem, you get this error. #: sysdeps/gnu/errlist.c:190 msgid "Device or resource busy" msgstr "裝置或系統資源忙碌中" #. TRANS File exists; an existing file was specified in a context where it only #. TRANS makes sense to specify a new file. #: sysdeps/gnu/errlist.c:200 msgid "File exists" msgstr "檔案已存在" #. TRANS An attempt to make an improper link across file systems was detected. #. TRANS This happens not only when you use @code{link} (@pxref{Hard Links}) but #. TRANS also when you rename a file with @code{rename} (@pxref{Renaming Files}). #: sysdeps/gnu/errlist.c:211 msgid "Invalid cross-device link" msgstr "不適用的裝置間連結" #. TRANS The wrong type of device was given to a function that expects a #. TRANS particular sort of device. #: sysdeps/gnu/errlist.c:221 msgid "No such device" msgstr "沒有此一裝置" #. TRANS A file that isn't a directory was specified when a directory is required. #: sysdeps/gnu/errlist.c:230 msgid "Not a directory" msgstr "並不是一個目錄" #. TRANS File is a directory; you cannot open a directory for writing, #. TRANS or create or remove hard links to it. #: sysdeps/gnu/errlist.c:240 msgid "Is a directory" msgstr "是個目錄" #. TRANS Invalid argument. This is used to indicate various kinds of problems #. TRANS with passing the wrong argument to a library function. #: sysdeps/gnu/errlist.c:250 msgid "Invalid argument" msgstr "不適用的引數" #. TRANS The current process has too many files open and can't open any more. #. TRANS Duplicate descriptors do count toward this limit. #. TRANS #. TRANS In BSD and GNU, the number of open files is controlled by a resource #. TRANS limit that can usually be increased. If you get this error, you might #. TRANS want to increase the @code{RLIMIT_NOFILE} limit or make it unlimited; #. TRANS @pxref{Limits on Resources}. #: sysdeps/gnu/errlist.c:265 msgid "Too many open files" msgstr "開啟太多檔案" #. TRANS There are too many distinct file openings in the entire system. Note #. TRANS that any number of linked channels count as just one file opening; see #. TRANS @ref{Linked Channels}. This error never occurs on @gnuhurdsystems{}. #: sysdeps/gnu/errlist.c:276 msgid "Too many open files in system" msgstr "系統中太多的開啟檔案" #. TRANS Inappropriate I/O control operation, such as trying to set terminal #. TRANS modes on an ordinary file. #: sysdeps/gnu/errlist.c:286 msgid "Inappropriate ioctl for device" msgstr "不希望的裝置輸出入控制 (ioctl)" #. TRANS An attempt to execute a file that is currently open for writing, or #. TRANS write to a file that is currently being executed. Often using a #. TRANS debugger to run a program is considered having it open for writing and #. TRANS will cause this error. (The name stands for ``text file busy''.) This #. TRANS is not an error on @gnuhurdsystems{}; the text is copied as necessary. #: sysdeps/gnu/errlist.c:299 msgid "Text file busy" msgstr "文字檔忙錄中" #. TRANS File too big; the size of a file would be larger than allowed by the system. #: sysdeps/gnu/errlist.c:308 msgid "File too large" msgstr "檔案太大" #. TRANS No space left on device; write operation on a file failed because the #. TRANS disk is full. #: sysdeps/gnu/errlist.c:318 msgid "No space left on device" msgstr "裝置上已無多餘空間" #. TRANS Invalid seek operation (such as on a pipe). #: sysdeps/gnu/errlist.c:327 msgid "Illegal seek" msgstr "不合法的搜尋" #. TRANS An attempt was made to modify something on a read-only file system. #: sysdeps/gnu/errlist.c:336 msgid "Read-only file system" msgstr "唯讀的檔案系統" #. TRANS Too many links; the link count of a single file would become too large. #. TRANS @code{rename} can cause this error if the file being renamed already has #. TRANS as many links as it can take (@pxref{Renaming Files}). #: sysdeps/gnu/errlist.c:347 msgid "Too many links" msgstr "太多連結" #. TRANS Domain error; used by mathematical functions when an argument value does #. TRANS not fall into the domain over which the function is defined. #: sysdeps/gnu/errlist.c:370 msgid "Numerical argument out of domain" msgstr "數值參數的值超出範圍" #. TRANS Range error; used by mathematical functions when the result value is #. TRANS not representable because of overflow or underflow. #: sysdeps/gnu/errlist.c:380 msgid "Numerical result out of range" msgstr "數值運算結果超出範圍" #. TRANS Resource temporarily unavailable; the call might work if you try again #. TRANS later. The macro @code{EWOULDBLOCK} is another name for @code{EAGAIN}; #. TRANS they are always the same in @theglibc{}. #. TRANS #. TRANS This error can happen in a few different situations: #. TRANS #. TRANS @itemize @bullet #. TRANS @item #. TRANS An operation that would block was attempted on an object that has #. TRANS non-blocking mode selected. Trying the same operation again will block #. TRANS until some external condition makes it possible to read, write, or #. TRANS connect (whatever the operation). You can use @code{select} to find out #. TRANS when the operation will be possible; @pxref{Waiting for I/O}. #. TRANS #. TRANS @strong{Portability Note:} In many older Unix systems, this condition #. TRANS was indicated by @code{EWOULDBLOCK}, which was a distinct error code #. TRANS different from @code{EAGAIN}. To make your program portable, you should #. TRANS check for both codes and treat them the same. #. TRANS #. TRANS @item #. TRANS A temporary resource shortage made an operation impossible. @code{fork} #. TRANS can return this error. It indicates that the shortage is expected to #. TRANS pass, so your program can try the call again later and it may succeed. #. TRANS It is probably a good idea to delay for a few seconds before trying it #. TRANS again, to allow time for other processes to release scarce resources. #. TRANS Such shortages are usually fairly serious and affect the whole system, #. TRANS so usually an interactive program should report the error to the user #. TRANS and return to its command loop. #. TRANS @end itemize #: sysdeps/gnu/errlist.c:417 msgid "Resource temporarily unavailable" msgstr "資源暫時無法取得" #. TRANS In @theglibc{}, this is another name for @code{EAGAIN} (above). #. TRANS The values are always the same, on every operating system. #. TRANS #. TRANS C libraries in many older Unix systems have @code{EWOULDBLOCK} as a #. TRANS separate error code. #: sysdeps/gnu/errlist.c:430 msgid "Operation would block" msgstr "操作將會暫停" #. TRANS An operation that cannot complete immediately was initiated on an object #. TRANS that has non-blocking mode selected. Some functions that must always #. TRANS block (such as @code{connect}; @pxref{Connecting}) never return #. TRANS @code{EAGAIN}. Instead, they return @code{EINPROGRESS} to indicate that #. TRANS the operation has begun and will take some time. Attempts to manipulate #. TRANS the object before the call completes return @code{EALREADY}. You can #. TRANS use the @code{select} function to find out when the pending operation #. TRANS has completed; @pxref{Waiting for I/O}. #: sysdeps/gnu/errlist.c:446 msgid "Operation now in progress" msgstr "操作正在處理" #. TRANS An operation is already in progress on an object that has non-blocking #. TRANS mode selected. #: sysdeps/gnu/errlist.c:456 msgid "Operation already in progress" msgstr "此項操作已在處理中" #. TRANS A file that isn't a socket was specified when a socket is required. #: sysdeps/gnu/errlist.c:465 msgid "Socket operation on non-socket" msgstr "Socket 在非 socket 上運作" #. TRANS The size of a message sent on a socket was larger than the supported #. TRANS maximum size. #: sysdeps/gnu/errlist.c:475 msgid "Message too long" msgstr "訊息太長" #. TRANS The socket type does not support the requested communications protocol. #: sysdeps/gnu/errlist.c:484 msgid "Protocol wrong type for socket" msgstr "通訊端的協定錯誤型態" #. TRANS You specified a socket option that doesn't make sense for the #. TRANS particular protocol being used by the socket. @xref{Socket Options}. #: sysdeps/gnu/errlist.c:494 msgid "Protocol not available" msgstr "協定不存在" #. TRANS The socket domain does not support the requested communications protocol #. TRANS (perhaps because the requested protocol is completely invalid). #. TRANS @xref{Creating a Socket}. #: sysdeps/gnu/errlist.c:505 msgid "Protocol not supported" msgstr "協定不支援" #. TRANS The socket type is not supported. #: sysdeps/gnu/errlist.c:514 msgid "Socket type not supported" msgstr "通訊端型別不支援" #. TRANS The operation you requested is not supported. Some socket functions #. TRANS don't make sense for all types of sockets, and others may not be #. TRANS implemented for all communications protocols. On @gnuhurdsystems{}, this #. TRANS error can happen for many calls when the object does not support the #. TRANS particular operation; it is a generic indication that the server knows #. TRANS nothing to do for that call. #: sysdeps/gnu/errlist.c:528 msgid "Operation not supported" msgstr "此項操作並不被支援" #. TRANS The socket communications protocol family you requested is not supported. #: sysdeps/gnu/errlist.c:537 msgid "Protocol family not supported" msgstr "協定群組不支援" #. TRANS The address family specified for a socket is not supported; it is #. TRANS inconsistent with the protocol being used on the socket. @xref{Sockets}. #: sysdeps/gnu/errlist.c:547 msgid "Address family not supported by protocol" msgstr "位址族群不被協定所支援" #. TRANS The requested socket address is already in use. @xref{Socket Addresses}. #: sysdeps/gnu/errlist.c:556 msgid "Address already in use" msgstr "位址已經有在使用" #. TRANS The requested socket address is not available; for example, you tried #. TRANS to give a socket a name that doesn't match the local host name. #. TRANS @xref{Socket Addresses}. #: sysdeps/gnu/errlist.c:567 msgid "Cannot assign requested address" msgstr "無法指定所需的位址" #. TRANS A socket operation failed because the network was down. #: sysdeps/gnu/errlist.c:576 msgid "Network is down" msgstr "網路停擺" #. TRANS A socket operation failed because the subnet containing the remote host #. TRANS was unreachable. #: sysdeps/gnu/errlist.c:586 msgid "Network is unreachable" msgstr "無法接觸網路" #. TRANS A network connection was reset because the remote host crashed. #: sysdeps/gnu/errlist.c:595 msgid "Network dropped connection on reset" msgstr "在重設時網路連線漏失" #. TRANS A network connection was aborted locally. #: sysdeps/gnu/errlist.c:604 msgid "Software caused connection abort" msgstr "軟體造成連線中斷" #. TRANS A network connection was closed for reasons outside the control of the #. TRANS local host, such as by the remote machine rebooting or an unrecoverable #. TRANS protocol violation. #: sysdeps/gnu/errlist.c:615 msgid "Connection reset by peer" msgstr "連線被對方重設" #. TRANS The kernel's buffers for I/O operations are all in use. In GNU, this #. TRANS error is always synonymous with @code{ENOMEM}; you may get one or the #. TRANS other from network operations. #: sysdeps/gnu/errlist.c:626 msgid "No buffer space available" msgstr "沒有可用的緩衝空間了" #. TRANS You tried to connect a socket that is already connected. #. TRANS @xref{Connecting}. #: sysdeps/gnu/errlist.c:636 msgid "Transport endpoint is already connected" msgstr "傳輸的兩端已經完成連線了" #. TRANS The socket is not connected to anything. You get this error when you #. TRANS try to transmit data over a socket, without first specifying a #. TRANS destination for the data. For a connectionless socket (for datagram #. TRANS protocols, such as UDP), you get @code{EDESTADDRREQ} instead. #: sysdeps/gnu/errlist.c:648 msgid "Transport endpoint is not connected" msgstr "傳輸的兩端尚未連線" #. TRANS No default destination address was set for the socket. You get this #. TRANS error when you try to transmit data over a connectionless socket, #. TRANS without first specifying a destination for the data with @code{connect}. #: sysdeps/gnu/errlist.c:659 msgid "Destination address required" msgstr "需要目標位址" #. TRANS The socket has already been shut down. #: sysdeps/gnu/errlist.c:668 msgid "Cannot send after transport endpoint shutdown" msgstr "無法在輸送端點關閉後傳送" #. TRANS ??? #: sysdeps/gnu/errlist.c:677 msgid "Too many references: cannot splice" msgstr "太多的參考指標: 無法連接" #. TRANS A socket operation with a specified timeout received no response during #. TRANS the timeout period. #: sysdeps/gnu/errlist.c:687 msgid "Connection timed out" msgstr "連線超過時間" #. TRANS A remote host refused to allow the network connection (typically because #. TRANS it is not running the requested service). #: sysdeps/gnu/errlist.c:697 msgid "Connection refused" msgstr "連線被拒絕" #. TRANS Too many levels of symbolic links were encountered in looking up a file name. #. TRANS This often indicates a cycle of symbolic links. #: sysdeps/gnu/errlist.c:707 msgid "Too many levels of symbolic links" msgstr "太多層級的符號連結檔" #. TRANS Filename too long (longer than @code{PATH_MAX}; @pxref{Limits for #. TRANS Files}) or host name too long (in @code{gethostname} or #. TRANS @code{sethostname}; @pxref{Host Identification}). #: sysdeps/gnu/errlist.c:718 msgid "File name too long" msgstr "檔名太長" #. TRANS The remote host for a requested network connection is down. #: sysdeps/gnu/errlist.c:727 msgid "Host is down" msgstr "遠端系統已停機了" #. TRANS The remote host for a requested network connection is not reachable. #: sysdeps/gnu/errlist.c:736 msgid "No route to host" msgstr "找不到通往該主機的路由路徑" #. TRANS Directory not empty, where an empty directory was expected. Typically, #. TRANS this error occurs when you are trying to delete a directory. #: sysdeps/gnu/errlist.c:746 msgid "Directory not empty" msgstr "目錄不是空的" #. TRANS This means that the per-user limit on new process would be exceeded by #. TRANS an attempted @code{fork}. @xref{Limits on Resources}, for details on #. TRANS the @code{RLIMIT_NPROC} limit. #: sysdeps/gnu/errlist.c:757 msgid "Too many processes" msgstr "太多的行程" #. TRANS The file quota system is confused because there are too many users. #. TRANS @c This can probably happen in a GNU system when using NFS. #: sysdeps/gnu/errlist.c:767 msgid "Too many users" msgstr "太多使用者" #. TRANS The user's disk quota was exceeded. #: sysdeps/gnu/errlist.c:776 msgid "Disk quota exceeded" msgstr "磁碟配額已滿" #. TRANS Stale file handle. This indicates an internal confusion in the #. TRANS file system which is due to file system rearrangements on the server host #. TRANS for NFS file systems or corruption in other file systems. #. TRANS Repairing this condition usually requires unmounting, possibly repairing #. TRANS and remounting the file system. #: sysdeps/gnu/errlist.c:789 msgid "Stale file handle" msgstr "過舊的檔案控柄" #. TRANS An attempt was made to NFS-mount a remote file system with a file name that #. TRANS already specifies an NFS-mounted file. #. TRANS (This is an error on some operating systems, but we expect it to work #. TRANS properly on @gnuhurdsystems{}, making this error code impossible.) #: sysdeps/gnu/errlist.c:801 msgid "Object is remote" msgstr "目標檔案位於遠端" #. TRANS ??? #: sysdeps/gnu/errlist.c:810 msgid "RPC struct is bad" msgstr "RPC 結構是壞的" #. TRANS ??? #: sysdeps/gnu/errlist.c:819 msgid "RPC version wrong" msgstr "RPC 版本錯誤" #. TRANS ??? #: sysdeps/gnu/errlist.c:828 msgid "RPC program not available" msgstr "RPC 程式不存在" #. TRANS ??? #: sysdeps/gnu/errlist.c:837 msgid "RPC program version wrong" msgstr "RPC 程式版本錯誤" #. TRANS ??? #: sysdeps/gnu/errlist.c:846 msgid "RPC bad procedure for program" msgstr "程式的 RPC 程序錯誤" #. TRANS No locks available. This is used by the file locking facilities; see #. TRANS @ref{File Locks}. This error is never generated by @gnuhurdsystems{}, but #. TRANS it can result from an operation to an NFS server running another #. TRANS operating system. #: sysdeps/gnu/errlist.c:858 msgid "No locks available" msgstr "無法鎖定資料" #. TRANS Inappropriate file type or format. The file was the wrong type for the #. TRANS operation, or a data file had the wrong format. #. TRANS #. TRANS On some systems @code{chmod} returns this error if you try to set the #. TRANS sticky bit on a non-directory file; @pxref{Setting Permissions}. #: sysdeps/gnu/errlist.c:871 msgid "Inappropriate file type or format" msgstr "不希望的檔案型態或格式" #. TRANS ??? #: sysdeps/gnu/errlist.c:880 msgid "Authentication error" msgstr "鑑定錯誤" #. TRANS ??? #: sysdeps/gnu/errlist.c:889 msgid "Need authenticator" msgstr "需要認證" #. TRANS Function not implemented. This indicates that the function called is #. TRANS not implemented at all, either in the C library itself or in the #. TRANS operating system. When you get this error, you can be sure that this #. TRANS particular function will always fail with @code{ENOSYS} unless you #. TRANS install a new version of the C library or the operating system. #: sysdeps/gnu/errlist.c:902 msgid "Function not implemented" msgstr "功能沒有實作" #. TRANS Not supported. A function returns this error when certain parameter #. TRANS values are valid, but the functionality they request is not available. #. TRANS This can mean that the function does not implement a particular command #. TRANS or option value or flag bit at all. For functions that operate on some #. TRANS object given in a parameter, such as a file descriptor or a port, it #. TRANS might instead mean that only @emph{that specific object} (file #. TRANS descriptor, port, etc.) is unable to support the other parameters given; #. TRANS different file descriptors might support different ranges of parameter #. TRANS values. #. TRANS #. TRANS If the entire function is not available at all in the implementation, #. TRANS it returns @code{ENOSYS} instead. #: sysdeps/gnu/errlist.c:922 msgid "Not supported" msgstr "並未支援" #. TRANS While decoding a multibyte character the function came along an invalid #. TRANS or an incomplete sequence of bytes or the given wide character is invalid. #: sysdeps/gnu/errlist.c:932 msgid "Invalid or incomplete multibyte or wide character" msgstr "不適用或不完整的多位元組字元或寬字元" #. TRANS On @gnuhurdsystems{}, servers supporting the @code{term} protocol return #. TRANS this error for certain operations when the caller is not in the #. TRANS foreground process group of the terminal. Users do not usually see this #. TRANS error because functions such as @code{read} and @code{write} translate #. TRANS it into a @code{SIGTTIN} or @code{SIGTTOU} signal. @xref{Job Control}, #. TRANS for information on process groups and these signals. #: sysdeps/gnu/errlist.c:946 msgid "Inappropriate operation for background process" msgstr "不希望的背景行程運作" #. TRANS On @gnuhurdsystems{}, opening a file returns this error when the file is #. TRANS translated by a program and the translator program dies while starting #. TRANS up, before it has connected to the file. #: sysdeps/gnu/errlist.c:957 msgid "Translator died" msgstr "中介程式已經結束" #. TRANS The experienced user will know what is wrong. #. TRANS @c This error code is a joke. Its perror text is part of the joke. #. TRANS @c Don't change it. #: sysdeps/gnu/errlist.c:968 msgid "?" msgstr "?" #. TRANS You did @strong{what}? #: sysdeps/gnu/errlist.c:977 msgid "You really blew it this time" msgstr "這次真的被您打敗了" # This is error EIEIO, errno 104 # # - Macro: int EIEIO # Go home and have a glass of warm, dairy-fresh milk. # # The following messages were copied & pasted # from es.po by Santiago Vila Doncel . # # # 穌u diablos es esto?, esperemos a tener las fuentes # estupendo, este error parece mostrarse en dos ocasiones # - Macro: int EIEIO # Go home and have a glass of warm, dairy-fresh milk. # Jochen tambien lo traduce as. em # # Okay. Since you are dying to know, I'll tell you. # This is a joke, obviously. There is a children's song which begins, # "Old McDonald had a farm, e-i-e-i-o." Every time I see the (real) # errno macro EIO, I think about that song. Probably most of my # compatriots who program on Unix do, too. One of them must have stayed # up a little too late one night and decided to add it to Hurd or Glibc. # Whoever did it should be castigated, but it made me laugh. # --jtobey@channel1.com # # "bought the farm" means "died". -jtobey # # Bueno, pues despu廥 de pensarlo mucho, he seguido el ejemplo de la # traducci鏮 francesa (traducci鏮 libre). sv # # # 簡單的說，兒歌 "唐老先生有塊地..."，然後呢?? ;-p # #. TRANS Go home and have a glass of warm, dairy-fresh milk. #: sysdeps/gnu/errlist.c:986 msgid "Computer bought the farm" msgstr "這臺電腦買了一塊地囉" #. TRANS This error code has no purpose. #: sysdeps/gnu/errlist.c:995 msgid "Gratuitous error" msgstr "無故的錯誤" #: sysdeps/gnu/errlist.c:1003 msgid "Bad message" msgstr "錯誤的訊息" #: sysdeps/gnu/errlist.c:1011 msgid "Identifier removed" msgstr "識別符號移除" #: sysdeps/gnu/errlist.c:1019 msgid "Multihop attempted" msgstr "嘗試 Multihop" #: sysdeps/gnu/errlist.c:1027 msgid "No data available" msgstr "沒有可用的資料" #: sysdeps/gnu/errlist.c:1035 msgid "Link has been severed" msgstr "連結已有服務" #: sysdeps/gnu/errlist.c:1043 msgid "No message of desired type" msgstr "沒有符合需求格式的訊息" #: sysdeps/gnu/errlist.c:1051 msgid "Out of streams resources" msgstr "所有資料流的資源都已用盡" #: sysdeps/gnu/errlist.c:1059 msgid "Device not a stream" msgstr "裝置不是資料流" #: sysdeps/gnu/errlist.c:1067 msgid "Value too large for defined data type" msgstr "有定義的資料型別值太大" #: sysdeps/gnu/errlist.c:1075 msgid "Protocol error" msgstr "協定錯誤" #: sysdeps/gnu/errlist.c:1083 msgid "Timer expired" msgstr "計時器已逾時" #. TRANS Operation canceled; an asynchronous operation was canceled before it #. TRANS completed. @xref{Asynchronous I/O}. When you call @code{aio_cancel}, #. TRANS the normal result is for the operations affected to complete with this #. TRANS error; @pxref{Cancel AIO Operations}. #: sysdeps/gnu/errlist.c:1095 msgid "Operation canceled" msgstr "操作已被取消" #: sysdeps/gnu/errlist.c:1103 msgid "Interrupted system call should be restarted" msgstr "中斷的系統呼叫必須重新啟動" #: sysdeps/gnu/errlist.c:1111 msgid "Channel number out of range" msgstr "通道號碼超出範圍" #: sysdeps/gnu/errlist.c:1119 msgid "Level 2 not synchronized" msgstr "層級 2 沒有同步" #: sysdeps/gnu/errlist.c:1127 msgid "Level 3 halted" msgstr "層級 3 停止" #: sysdeps/gnu/errlist.c:1135 msgid "Level 3 reset" msgstr "層級 3 重設" #: sysdeps/gnu/errlist.c:1143 msgid "Link number out of range" msgstr "連結數目超過範圍" #: sysdeps/gnu/errlist.c:1151 msgid "Protocol driver not attached" msgstr "協定的驅動程式未連接" #: sysdeps/gnu/errlist.c:1159 msgid "No CSI structure available" msgstr "沒有可用的 CSI 結構了" #: sysdeps/gnu/errlist.c:1167 msgid "Level 2 halted" msgstr "層級 2 停止" #: sysdeps/gnu/errlist.c:1175 msgid "Invalid exchange" msgstr "不適用的交換" #: sysdeps/gnu/errlist.c:1183 msgid "Invalid request descriptor" msgstr "不適用的請求敘述項" #: sysdeps/gnu/errlist.c:1191 msgid "Exchange full" msgstr "交換已滿" #: sysdeps/gnu/errlist.c:1199 msgid "No anode" msgstr "沒有 anode" #: sysdeps/gnu/errlist.c:1207 msgid "Invalid request code" msgstr "不適用的請求碼" #: sysdeps/gnu/errlist.c:1215 msgid "Invalid slot" msgstr "不適用的 slot" #: sysdeps/gnu/errlist.c:1223 msgid "File locking deadlock error" msgstr "檔案鎖定停頓錯誤" #: sysdeps/gnu/errlist.c:1231 msgid "Bad font file format" msgstr "錯誤的字型檔格式" #: sysdeps/gnu/errlist.c:1239 msgid "Machine is not on the network" msgstr "機器不在網路中" #: sysdeps/gnu/errlist.c:1247 msgid "Package not installed" msgstr "套件並未安裝" #: sysdeps/gnu/errlist.c:1255 msgid "Advertise error" msgstr "通知錯誤" #: sysdeps/gnu/errlist.c:1263 msgid "Srmount error" msgstr "Srmount 錯誤" #: sysdeps/gnu/errlist.c:1271 msgid "Communication error on send" msgstr "在傳送時通訊錯誤" #: sysdeps/gnu/errlist.c:1279 msgid "RFS specific error" msgstr "RFS 特定錯誤" #: sysdeps/gnu/errlist.c:1287 msgid "Name not unique on network" msgstr "網路上的名稱不是唯一的" #: sysdeps/gnu/errlist.c:1295 msgid "File descriptor in bad state" msgstr "檔案敘述項處於錯誤狀態" #: sysdeps/gnu/errlist.c:1303 msgid "Remote address changed" msgstr "遠端位址改變了" #: sysdeps/gnu/errlist.c:1311 msgid "Can not access a needed shared library" msgstr "無法存取所需的分享函式庫" #: sysdeps/gnu/errlist.c:1319 msgid "Accessing a corrupted shared library" msgstr "存取一個毀掉的分享函式庫" #: sysdeps/gnu/errlist.c:1327 msgid ".lib section in a.out corrupted" msgstr "a.out 中 .lib 區段毀掉了" #: sysdeps/gnu/errlist.c:1335 msgid "Attempting to link in too many shared libraries" msgstr "嘗試去連結太多的分享資料庫" #: sysdeps/gnu/errlist.c:1343 msgid "Cannot exec a shared library directly" msgstr "不能直接執行一個分享函式庫" #: sysdeps/gnu/errlist.c:1351 msgid "Streams pipe error" msgstr "資料流管線錯誤" #: sysdeps/gnu/errlist.c:1359 msgid "Structure needs cleaning" msgstr "結構需要清理" #: sysdeps/gnu/errlist.c:1367 msgid "Not a XENIX named type file" msgstr "並非 XENIX 命名格式的檔案" #: sysdeps/gnu/errlist.c:1375 msgid "No XENIX semaphores available" msgstr "沒有可用的 XENIX 信號標誌了" #: sysdeps/gnu/errlist.c:1383 msgid "Is a named type file" msgstr "是個具名的型態檔案" #: sysdeps/gnu/errlist.c:1391 msgid "Remote I/O error" msgstr "遠端輸出入錯誤" #: sysdeps/gnu/errlist.c:1399 msgid "No medium found" msgstr "找不到媒體" #: sysdeps/gnu/errlist.c:1407 msgid "Wrong medium type" msgstr "錯誤的媒體型態" #: sysdeps/gnu/errlist.c:1415 msgid "Required key not available" msgstr "必要鍵值無法使用" #: sysdeps/gnu/errlist.c:1423 msgid "Key has expired" msgstr "鍵值已過期" #: sysdeps/gnu/errlist.c:1431 msgid "Key has been revoked" msgstr "鍵值已取消" #: sysdeps/gnu/errlist.c:1439 msgid "Key was rejected by service" msgstr "鍵值被服務所拒絕" #: sysdeps/gnu/errlist.c:1447 msgid "Owner died" msgstr "擁有者已消逝" #: sysdeps/gnu/errlist.c:1455 msgid "State not recoverable" msgstr "狀態無法回復" #: sysdeps/gnu/errlist.c:1463 msgid "Operation not possible due to RF-kill" msgstr "由於 RF-kill 而無法操作" #: sysdeps/gnu/errlist.c:1471 msgid "Memory page has hardware error" msgstr "記憶體分頁有硬體錯誤" #: sysdeps/mach/_strerror.c:56 msgid "Error in unknown error system: " msgstr "未知系統錯誤: " #: sysdeps/posix/gai_strerror-strs.h:1 msgid "Address family for hostname not supported" msgstr "hostname 的位址族群不支援" #: sysdeps/posix/gai_strerror-strs.h:2 msgid "Temporary failure in name resolution" msgstr "解析名稱時發生暫時性的錯誤" #: sysdeps/posix/gai_strerror-strs.h:3 msgid "Bad value for ai_flags" msgstr "錯誤的 ai_flags 值" #: sysdeps/posix/gai_strerror-strs.h:4 msgid "Non-recoverable failure in name resolution" msgstr "在解析名稱時發生嚴重的錯誤" #: sysdeps/posix/gai_strerror-strs.h:5 msgid "ai_family not supported" msgstr "ai_family 沒有支援" #: sysdeps/posix/gai_strerror-strs.h:6 msgid "Memory allocation failure" msgstr "記憶體配置失敗" #: sysdeps/posix/gai_strerror-strs.h:7 msgid "No address associated with hostname" msgstr "沒有此主機名稱所對應的位址" #: sysdeps/posix/gai_strerror-strs.h:8 msgid "Name or service not known" msgstr "未知的名稱或服務" #: sysdeps/posix/gai_strerror-strs.h:9 msgid "Servname not supported for ai_socktype" msgstr "不支援 ai_socktype 的伺服名稱" #: sysdeps/posix/gai_strerror-strs.h:10 msgid "ai_socktype not supported" msgstr "ai_socktype 沒有支援" #: sysdeps/posix/gai_strerror-strs.h:11 msgid "System error" msgstr "系統錯誤" #: sysdeps/posix/gai_strerror-strs.h:12 msgid "Processing request in progress" msgstr "此項請求已經在處理當中" #: sysdeps/posix/gai_strerror-strs.h:13 msgid "Request canceled" msgstr "請求已被取消" #: sysdeps/posix/gai_strerror-strs.h:14 msgid "Request not canceled" msgstr "請求並未取消" #: sysdeps/posix/gai_strerror-strs.h:15 msgid "All requests done" msgstr "所有請求已完成" #: sysdeps/posix/gai_strerror-strs.h:16 msgid "Interrupted by a signal" msgstr "由訊號所中斷" #: sysdeps/posix/gai_strerror-strs.h:17 msgid "Parameter string not correctly encoded" msgstr "參數字串無法正確編碼" #: sysdeps/unix/sysv/linux/i386/readelflib.c:65 #, c-format msgid "%s is for unknown machine %d.\n" msgstr "%s 是給未知的機器 %d。\n" #: sysdeps/unix/sysv/linux/ia64/makecontext.c:58 #, c-format msgid "makecontext: does not know how to handle more than 8 arguments\n" msgstr "makecontext: 不知要如何處理超過八個引數\n" #: sysdeps/unix/sysv/linux/lddlibc4.c:60 #, c-format msgid "" "Usage: lddlibc4 FILE\n" "\n" msgstr "" "用法：lddlibc4 檔案\n" "\n" #: sysdeps/unix/sysv/linux/lddlibc4.c:81 #, c-format msgid "cannot open `%s'" msgstr "無法開啟 `%s'" #: sysdeps/unix/sysv/linux/lddlibc4.c:85 #, c-format msgid "cannot read header from `%s'" msgstr "無法從 `%s' 讀取標頭資料" #: timezone/zdump.c:282 msgid "lacks alphabetic at start" msgstr "lacks 字母順序於開始" #: timezone/zdump.c:284 msgid "has fewer than 3 alphabetics" msgstr "有更少的比 3 字母順序" #: timezone/zdump.c:286 msgid "has more than 6 alphabetics" msgstr "有超過 6 字母順序" #: timezone/zdump.c:294 msgid "differs from POSIX standard" msgstr "differs 從 POSIX 標準" #: timezone/zdump.c:300 #, c-format msgid "%s: warning: zone \"%s\" abbreviation \"%s\" %s\n" msgstr "%s: 警告：區域「%s」縮寫「%s」%s\n" #: timezone/zdump.c:309 #, fuzzy, c-format #| msgid "" #| "%s: usage is %s [ --version ] [ --help ] [ -v ] [ -c [loyear,]hiyear ] zonename ...\n" #| "\n" #| "Report bugs to %s.\n" msgid "" "%s: usage: %s [--version] [--help] [-{vV}] [-{ct} [lo,]hi] zonename ...\n" "\n" "Report bugs to %s.\n" msgstr "" "%s：用法為 %s [--version] [--help] [-v] [-c [低年分,]高年分 ] 區域名稱 ...\n" "\n" "將錯誤通報給 %s。\n" #: timezone/zdump.c:386 #, c-format msgid "%s: wild -c argument %s\n" msgstr "%s: wild -c 引數 %s\n" #: timezone/zdump.c:419 #, fuzzy, c-format #| msgid "%s: wild -c argument %s\n" msgid "%s: wild -t argument %s\n" msgstr "%s: wild -c 引數 %s\n" #: timezone/zdump.c:508 msgid "Error writing to standard output" msgstr "寫入標準輸出時錯誤" #: timezone/zic.c:371 #, c-format msgid "%s: Memory exhausted: %s\n" msgstr "%s: 記憶體已用完: %s\n" #: timezone/zic.c:438 #, fuzzy, c-format #| msgid "\"%s\", line %d: %s" msgid "\"%s\", line %d: " msgstr "\"%s\", 第 %d 列: %s" #: timezone/zic.c:441 #, c-format msgid " (rule from \"%s\", line %d)" msgstr " (規則來自 \"%s\", 第 %d 列)" #: timezone/zic.c:460 #, c-format msgid "warning: " msgstr "警告: " #: timezone/zic.c:470 #, c-format msgid "" "%s: usage is %s [ --version ] [ --help ] [ -v ] [ -l localtime ] [ -p posixrules ] \\\n" "\t[ -d directory ] [ -L leapseconds ] [ -y yearistype ] [ filename ... ]\n" "\n" "Report bugs to %s.\n" msgstr "" "%s：用法為 %s [ --version ] [ --help ] [ -v ] [ -l 本地時間 ] [ -p POSIX規則 ] \\\n" "\t[ -d 目錄 ] [ -L 跳躍秒數 ] [ -y 年分類型 ] [ 檔名 ... ]\n" "\n" "將錯誤通報給 %s。\n" #: timezone/zic.c:505 msgid "wild compilation-time specification of zic_t" msgstr "zic_t 的萬用編譯時間規格" #: timezone/zic.c:524 #, c-format msgid "%s: More than one -d option specified\n" msgstr "%s: 您使用了超過一個 -d 選項\n" #: timezone/zic.c:534 #, c-format msgid "%s: More than one -l option specified\n" msgstr "%s: 您使用了超過一個 -l 選項\n" #: timezone/zic.c:544 #, c-format msgid "%s: More than one -p option specified\n" msgstr "%s: 您使用了超過一個 -p 選項\n" #: timezone/zic.c:554 #, c-format msgid "%s: More than one -y option specified\n" msgstr "%s: 您使用了超過一個 -y 選項\n" #: timezone/zic.c:564 #, c-format msgid "%s: More than one -L option specified\n" msgstr "%s: 您使用了超過一個 -L 選項\n" #: timezone/zic.c:611 msgid "link to link" msgstr "連結到連結" #: timezone/zic.c:678 msgid "hard link failed, symbolic link used" msgstr "實體連結失敗，使用符號連結代替" #: timezone/zic.c:688 #, fuzzy, c-format #| msgid "%s: Can't create %s: %s\n" msgid "%s: Can't read %s: %s\n" msgstr "%s: 無法產生 %s: %s\n" #: timezone/zic.c:696 timezone/zic.c:1595 #, c-format msgid "%s: Can't create %s: %s\n" msgstr "%s: 無法產生 %s: %s\n" #: timezone/zic.c:704 timezone/zic.c:939 #, c-format msgid "%s: Error reading %s\n" msgstr "%s: 讀取錯誤 %s\n" #: timezone/zic.c:710 timezone/zic.c:1792 #, c-format msgid "%s: Error writing %s\n" msgstr "%s: 寫入錯誤 %s\n" #: timezone/zic.c:714 #, fuzzy #| msgid "hard link failed, symbolic link used" msgid "link failed, copy used" msgstr "實體連結失敗，使用符號連結代替" #: timezone/zic.c:802 timezone/zic.c:804 msgid "same rule name in multiple files" msgstr "在多個檔案裡面有相同的規則名稱" #: timezone/zic.c:845 msgid "unruly zone" msgstr "沒有規則的時區" #: timezone/zic.c:852 #, c-format msgid "%s in ruleless zone" msgstr "%s 在沒有規則的區段" #: timezone/zic.c:872 msgid "standard input" msgstr "標準輸入" #: timezone/zic.c:877 #, c-format msgid "%s: Can't open %s: %s\n" msgstr "%s: 無法開啟 %s: %s\n" #: timezone/zic.c:888 msgid "line too long" msgstr "列的長度過長" #: timezone/zic.c:908 msgid "input line of unknown type" msgstr "不明型別的輸入列" #: timezone/zic.c:924 #, c-format msgid "%s: Leap line in non leap seconds file %s\n" msgstr "%s: 閏時設定列出現在不含閏秒的設定檔 %s 中\n" #: timezone/zic.c:931 timezone/zic.c:1339 timezone/zic.c:1361 #, c-format msgid "%s: panic: Invalid l_value %d\n" msgstr "%s: 嚴重錯誤: 錯誤的 l_value %d\n" #: timezone/zic.c:946 #, c-format msgid "%s: Error closing %s: %s\n" msgstr "%s: 關閉錯誤 %s: %s\n" #: timezone/zic.c:951 msgid "expected continuation line not found" msgstr "找不到預期的接續列" #: timezone/zic.c:992 timezone/zic.c:2644 timezone/zic.c:2658 msgid "time overflow" msgstr "時間溢位" #: timezone/zic.c:997 msgid "values over 24 hours not handled by pre-2007 versions of zic" msgstr "24 小時以上的值無法由早於 2007 的 zic 版本所處理" #: timezone/zic.c:1008 msgid "wrong number of fields on Rule line" msgstr "規則設定列的欄位數目錯誤" #: timezone/zic.c:1012 msgid "nameless rule" msgstr "沒有名稱的規則" #: timezone/zic.c:1017 msgid "invalid saved time" msgstr "無效的節約時間" #: timezone/zic.c:1034 msgid "wrong number of fields on Zone line" msgstr "時區設定列的欄位數目錯誤" #: timezone/zic.c:1039 #, c-format msgid "\"Zone %s\" line and -l option are mutually exclusive" msgstr "\"區段 %s\" 列和 -l 選項是互斥的" #: timezone/zic.c:1045 #, c-format msgid "\"Zone %s\" line and -p option are mutually exclusive" msgstr "\"區段 %s\" 列和 -p 選項是互斥的" #: timezone/zic.c:1053 #, c-format msgid "duplicate zone name %s (file \"%s\", line %d)" msgstr "複製時區名稱 %s (檔案 \"%s\", 第 %d 列)" #: timezone/zic.c:1066 msgid "wrong number of fields on Zone continuation line" msgstr "時區接續列的欄位數目不對" #: timezone/zic.c:1103 #, fuzzy #| msgid "invalid UTC offset" msgid "invalid UT offset" msgstr "無效的 UTC 位移值" #: timezone/zic.c:1106 msgid "invalid abbreviation format" msgstr "無效的縮寫格式" #: timezone/zic.c:1135 msgid "Zone continuation line end time is not after end time of previous line" msgstr "時區接續列的結束時間不在上一列的結束時間之後" #: timezone/zic.c:1161 msgid "wrong number of fields on Leap line" msgstr "閏時設定列的欄位數目錯誤" #: timezone/zic.c:1170 msgid "invalid leaping year" msgstr "無效的閏年" #: timezone/zic.c:1190 timezone/zic.c:1293 msgid "invalid month name" msgstr "無效的月分名稱" #: timezone/zic.c:1203 timezone/zic.c:1406 timezone/zic.c:1420 msgid "invalid day of month" msgstr "無效的日期數字" #: timezone/zic.c:1208 msgid "time too small" msgstr "時間太小" #: timezone/zic.c:1212 msgid "time too large" msgstr "時間太大" #: timezone/zic.c:1216 timezone/zic.c:1322 msgid "invalid time of day" msgstr "無效的時間數字" #: timezone/zic.c:1235 msgid "illegal CORRECTION field on Leap line" msgstr "在閏時設定列中有不合法的 CORRECTION 欄位" #: timezone/zic.c:1240 msgid "illegal Rolling/Stationary field on Leap line" msgstr "在閏時設定列中有不合法的 Rolling/Stationary 欄位" #: timezone/zic.c:1246 msgid "leap second precedes Big Bang" msgstr "" #: timezone/zic.c:1259 msgid "wrong number of fields on Link line" msgstr "連結設定列的欄位數目錯誤" #: timezone/zic.c:1263 msgid "blank FROM field on Link line" msgstr "連結列中空白的 FROM 欄位" #: timezone/zic.c:1267 msgid "blank TO field on Link line" msgstr "連結列中空白的 TO 欄位" #: timezone/zic.c:1343 msgid "invalid starting year" msgstr "無效的起始年分" #: timezone/zic.c:1365 msgid "invalid ending year" msgstr "無效的結束年分" #: timezone/zic.c:1369 msgid "starting year greater than ending year" msgstr "起始年分比結束年分還要大" #: timezone/zic.c:1376 msgid "typed single year" msgstr "輸入的年分是同一年" #: timezone/zic.c:1411 msgid "invalid weekday name" msgstr "無效的工作日名稱" #: timezone/zic.c:1530 msgid "pre-2014 clients may mishandle more than 1200 transition times" msgstr "" #: timezone/zic.c:1585 #, c-format msgid "%s: Can't remove %s: %s\n" msgstr "%s: 無法移除 %s: %s\n" #: timezone/zic.c:2143 msgid "no POSIX environment variable for zone" msgstr "無 POSIX 環境變數用於區" #: timezone/zic.c:2149 #, c-format msgid "%s: pre-%d clients may mishandle distant timestamps" msgstr "" #: timezone/zic.c:2329 msgid "can't determine time zone abbreviation to use just after until time" msgstr "無法決定在結束時間以後該使用的時區簡寫" #: timezone/zic.c:2375 timezone/zic.c:2450 msgid "too many local time types" msgstr "太多本地時間格式" #: timezone/zic.c:2423 msgid "internal error - addtype called with bad isdst" msgstr "內部錯誤 - 用錯誤的 isdst 呼叫 addtype 函式" #: timezone/zic.c:2427 msgid "internal error - addtype called with bad ttisstd" msgstr "內部錯誤 - 用錯誤的 ttisstd 呼叫 addtype 函式" #: timezone/zic.c:2431 msgid "internal error - addtype called with bad ttisgmt" msgstr "內部錯誤 - 用錯誤的 ttisgmt 呼叫 addtype 函式" #: timezone/zic.c:2454 #, fuzzy #| msgid "UTC offset out of range" msgid "UT offset out of range" msgstr "UTC 偏移超出範圍" #: timezone/zic.c:2478 msgid "too many leap seconds" msgstr "太多閏秒" #: timezone/zic.c:2484 msgid "repeated leap second moment" msgstr "重複的閏秒設定" #: timezone/zic.c:2534 msgid "Wild result from command execution" msgstr "命令執行導致奇怪的結果" #: timezone/zic.c:2535 #, c-format msgid "%s: command was '%s', result was %d\n" msgstr "%s: 輸入命令為 '%s', 結果為 %d\n" #: timezone/zic.c:2626 msgid "Odd number of quotation marks" msgstr "引號數目為奇數" #: timezone/zic.c:2703 msgid "use of 2/29 in non leap-year" msgstr "在非閏年時用到 2/29 日" #: timezone/zic.c:2738 msgid "rule goes past start/end of month--will not work with pre-2004 versions of zic" msgstr "規則超過開始/結束月分--將無法適用早於 2004 的 zic 版本" #: timezone/zic.c:2769 msgid "time zone abbreviation lacks alphabetic at start" msgstr "時區縮寫開頭缺少字母" #: timezone/zic.c:2771 msgid "time zone abbreviation has fewer than 3 alphabetics" msgstr "時間區縮寫少於 3 個字母" #: timezone/zic.c:2773 msgid "time zone abbreviation has too many alphabetics" msgstr "時區縮寫太多字母" #: timezone/zic.c:2783 msgid "time zone abbreviation differs from POSIX standard" msgstr "時區縮寫與 POSIX 標準不同" #: timezone/zic.c:2789 msgid "too many, or too long, time zone abbreviations" msgstr "時區縮寫太多或者太長" #: timezone/zic.c:2829 #, c-format msgid "%s: Can't create directory %s: %s\n" msgstr "%s: 無法建立目錄 %s: %s\n" #~ msgid "compile-time support for database policy missing" #~ msgstr "compile-time 支援用於資料庫策略缺少" #~ msgid "%s: use of -v on system with floating time_t other than float or double\n" #~ msgstr "%s: 使用 -v 於具備浮點數 time_t 的系統而非浮點數或雙倍精度\n" #~ msgid "%s: Can't link from %s to %s: %s\n" #~ msgstr "%s: 無法從 %s 連結到 %s: %s\n" #~ msgid "24:00 not handled by pre-1998 versions of zic" #~ msgstr "24:00 無法由早於 1998 的 zic 版本所處理" #~ msgid "time before zero" #~ msgstr "在零之前的時間" #~ msgid "too many transitions?!" #~ msgstr "太多時間轉換了?!" #~ msgid "%s: %d did not sign extend correctly\n" #~ msgstr "%s: %d 無法正確地延展訊號\n"