# Traditional Chinese Messages for wget2
# Copyright (C) 2026 Free Software Foundation, Inc.
# This file is distributed under the same license as the wget2 package.
# Alang Hsu <alang.hsu@gmail.com>, 2026.
#
msgid ""
msgstr ""
"Project-Id-Version: GNU wget2 2.2.1\n"
"Report-Msgid-Bugs-To: bug-wget2@gnu.org\n"
"POT-Creation-Date: 2025-12-30 19:01+0100\n"
"PO-Revision-Date: 2026-09-29 14:12+0800\n"
"Last-Translator: Alang Hsu <alang.hsu@gmail.com>\n"
"Language-Team: Chinese (traditional) <zh-l10n@lists.slat.org>\n"
"Language: zh_TW\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=1; plural=0;\n"
"X-Bugs: Report translation errors to the Language-Team address.\n"

#: lib/error.c:208
msgid "Unknown system error"
msgstr "未知的系統錯誤"

#: lib/gai_strerror.c:57
msgid "Address family for hostname not supported"
msgstr "不支援該主機名稱的位址族"

#: lib/gai_strerror.c:58
msgid "Temporary failure in name resolution"
msgstr "名稱解析暫時失敗"

#: lib/gai_strerror.c:59
msgid "Bad value for ai_flags"
msgstr "ai_flags 的值無效"

#: lib/gai_strerror.c:60
msgid "Non-recoverable failure in name resolution"
msgstr "名稱解析發生無法復原的失敗"

#: lib/gai_strerror.c:61
msgid "ai_family not supported"
msgstr "不支援 ai_family"

#: lib/gai_strerror.c:62
msgid "Memory allocation failure"
msgstr "記憶體配置失敗"

#: lib/gai_strerror.c:63
msgid "No address associated with hostname"
msgstr "該主機名稱沒有對應的位址"

#: lib/gai_strerror.c:64
msgid "Name or service not known"
msgstr "不明的名稱或服務"

#: lib/gai_strerror.c:65
msgid "Servname not supported for ai_socktype"
msgstr "ai_socktype 不支援該服務名稱"

#: lib/gai_strerror.c:66
msgid "ai_socktype not supported"
msgstr "不支援 ai_socktype"

#: lib/gai_strerror.c:67
msgid "System error"
msgstr "系統錯誤"

#: lib/gai_strerror.c:68
msgid "Argument buffer too small"
msgstr "引數緩衝區太小"

#: lib/gai_strerror.c:70
msgid "Processing request in progress"
msgstr "正在處理要求"

#: lib/gai_strerror.c:71
msgid "Request canceled"
msgstr "要求已取消"

#: lib/gai_strerror.c:72
msgid "Request not canceled"
msgstr "要求未取消"

#: lib/gai_strerror.c:73
msgid "All requests done"
msgstr "所有要求皆已完成"

#: lib/gai_strerror.c:74
msgid "Interrupted by a signal"
msgstr "被訊號中斷"

#: lib/gai_strerror.c:75
msgid "Parameter string not correctly encoded"
msgstr "參數字串編碼不正確"

#: lib/gai_strerror.c:86 libwget/error.c:57
msgid "Unknown error"
msgstr "未知的錯誤"

#: lib/openat-die.c:38
#, c-format
msgid "unable to record current working directory"
msgstr "無法記錄目前的工作目錄"

#: lib/openat-die.c:57
#, c-format
msgid "failed to return to initial working directory"
msgstr "無法回到初始的工作目錄"

#: lib/os2-spawn.c:51
#, c-format
msgid "_open_osfhandle failed"
msgstr "_open_osfhandle 失敗"

#: lib/os2-spawn.c:88
#, c-format
msgid "cannot restore fd %d: dup2 failed"
msgstr "無法復原 fd %d：dup2 失敗"

#: lib/regcomp.c:122 libwget/error.c:44
msgid "Success"
msgstr "成功"

#: lib/regcomp.c:125
msgid "No match"
msgstr "無相符項目"

#: lib/regcomp.c:128
msgid "Invalid regular expression"
msgstr "無效的常規運算式"

#: lib/regcomp.c:131
msgid "Invalid collation character"
msgstr "無效的排序字元"

#: lib/regcomp.c:134
msgid "Invalid character class name"
msgstr "無效的字元類別名稱"

#: lib/regcomp.c:137
msgid "Trailing backslash"
msgstr "結尾有反斜線"

#: lib/regcomp.c:140
msgid "Invalid back reference"
msgstr "無效的反向參照"

#: lib/regcomp.c:143
msgid "Unmatched [, [^, [:, [., or [="
msgstr "未配對的 [, [^, [:, [. 或 [="

#: lib/regcomp.c:146
msgid "Unmatched ( or \\("
msgstr "未配對的 ( 或 \\("

#: lib/regcomp.c:149
msgid "Unmatched \\{"
msgstr "未配對的 \\{"

#: lib/regcomp.c:152
msgid "Invalid content of \\{\\}"
msgstr "\\{\\} 的內容無效"

#: lib/regcomp.c:155
msgid "Invalid range end"
msgstr "無效的範圍結尾"

#: lib/regcomp.c:158
msgid "Memory exhausted"
msgstr "記憶體耗盡"

#: lib/regcomp.c:161
msgid "Invalid preceding regular expression"
msgstr "前導的常規運算式無效"

#: lib/regcomp.c:164
msgid "Premature end of regular expression"
msgstr "常規運算式提早結束"

#: lib/regcomp.c:167
msgid "Regular expression too big"
msgstr "常規運算式過大"

#: lib/regcomp.c:170
msgid "Unmatched ) or \\)"
msgstr "未配對的 ) 或 \\)"

#: lib/regcomp.c:650
msgid "No previous regular expression"
msgstr "沒有前一個常規運算式"

#: lib/spawn-pipe.c:218 lib/spawn-pipe.c:221
#, c-format
msgid "cannot create pipe"
msgstr "無法建立管線"

#: lib/spawn-pipe.c:597 lib/wait-process.c:325 lib/wait-process.c:396
#, c-format
msgid "%s subprocess failed"
msgstr "%s 子程序失敗"

#: lib/wait-process.c:266 lib/wait-process.c:298 lib/wait-process.c:357
#, c-format
msgid "%s subprocess"
msgstr "%s 子程序"

#: lib/wait-process.c:317 lib/wait-process.c:386
#, c-format
msgid "%s subprocess got fatal signal %d"
msgstr "%s 子程序收到致命訊號 %d"

#: lib/xalloc-die.c:34
msgid "memory exhausted"
msgstr "記憶體耗盡"

#: libwget/cookie.c:411
#, c-format
msgid "Incomplete cookie entry: %s\n"
msgstr "不完整的 cookie 項目：%s\n"

#: libwget/cookie.c:445
msgid "Failed to read cookies\n"
msgstr "無法讀取 cookie\n"

#: libwget/cookie.c:506
#, c-format
msgid "Failed to write cookie file '%s'\n"
msgstr "無法寫入 cookie 檔案「%s」\n"

#: libwget/cookie_parse.c:365
msgid "Cookie without name or assignment ignored\n"
msgstr "已略過沒有名稱或指派的 cookie\n"

#: libwget/css.c:152
#, c-format
msgid "Unknown token after @charset: %d\n"
msgstr "@charset 之後有未知的詞元：%d\n"

#: libwget/css.c:194 libwget/io.c:353 libwget/xml.c:678
#, c-format
msgid "Failed to open %s\n"
msgstr "無法開啟 %s\n"

#: libwget/css_url.c:104
#, c-format
msgid "Cannot resolve relative URI '%s'\n"
msgstr "無法解析相對 URI「%s」\n"

#: libwget/decompressor.c:123
msgid "Failed to init gzip decompression\n"
msgstr "無法初始化 gzip 解壓縮\n"

#: libwget/decompressor.c:159
msgid "Failed to re-init deflate/gzip decompression\n"
msgstr "無法重新初始化 deflate/gzip 解壓縮\n"

#: libwget/decompressor.c:175
#, c-format
msgid "Failed to uncompress gzip stream (%d)\n"
msgstr "無法解壓縮 gzip 串流 (%d)\n"

#: libwget/decompressor.c:184
#, c-format
msgid "Failed to close gzip stream (%d)\n"
msgstr "無法關閉 gzip 串流 (%d)\n"

#: libwget/decompressor.c:193
msgid "Failed to init deflate decompression\n"
msgstr "無法初始化 deflate 解壓縮\n"

#: libwget/decompressor.c:208
msgid "Failed to init LZMA decompression\n"
msgstr "無法初始化 LZMA 解壓縮\n"

#: libwget/decompressor.c:247
#, c-format
msgid "Failed to uncompress LZMA stream (%d)\n"
msgstr "無法解壓縮 LZMA 串流 (%d)\n"

#: libwget/decompressor.c:261
msgid "Failed to init Brotli decompression\n"
msgstr "無法初始化 Brotli 解壓縮\n"

#: libwget/decompressor.c:304
#, c-format
msgid "Failed to uncompress Brotli stream (%u): %s\n"
msgstr "無法解壓縮 Brotli 串流 (%u)：%s\n"

#: libwget/decompressor.c:319
msgid "Failed to create Zstandard decompression\n"
msgstr "無法建立 Zstandard 解壓縮\n"

#: libwget/decompressor.c:325
#, c-format
msgid "Failed to init Zstandard decompression: %s\n"
msgstr "無法初始化 Zstandard 解壓縮：%s\n"

#: libwget/decompressor.c:356
#, c-format
msgid "Failed to uncompress Zstandard stream: %s\n"
msgstr "無法解壓縮 Zstandard 串流：%s\n"

#: libwget/decompressor.c:377
msgid "Failed to create lzip decompression\n"
msgstr "無法建立 lzip 解壓縮\n"

#: libwget/decompressor.c:384
#, c-format
msgid "Failed to create lzip decompression: %d %s\n"
msgstr "無法建立 lzip 解壓縮：%d %s\n"

#: libwget/decompressor.c:405
#, c-format
msgid "Failed to uncompress lzip stream: %d %s\n"
msgstr "無法解壓縮 lzip 串流：%d %s\n"

#: libwget/decompressor.c:460
msgid "Failed to init bzip2 decompression\n"
msgstr "無法初始化 bzip2 解壓縮\n"

#: libwget/decompressor.c:499
#, c-format
msgid "Failed to uncompress bzip2 stream (%d)\n"
msgstr "無法解壓縮 bzip2 串流 (%d)\n"

#: libwget/dns.c:313
#, c-format
msgid "Failed to resolve '[%s]:%d': %s\n"
msgstr "無法解析「[%s]:%d」：%s\n"

#: libwget/dns.c:315
#, c-format
msgid "Failed to resolve '%s:%d': %s\n"
msgstr "無法解析「%s:%d」：%s\n"

#: libwget/dns.c:398
#, c-format
msgid "Failed to resolve '%s' (%s)\n"
msgstr "無法解析「%s」(%s)\n"

#: libwget/encoding.c:112
#, c-format
msgid "Failed to transcode '%s' string into '%s' (%d)\n"
msgstr "無法將「%s」字串轉碼為「%s」(%d)\n"

#: libwget/encoding.c:124
#, c-format
msgid "Failed to prepare transcoding '%s' into '%s' (%d)\n"
msgstr "無法準備將「%s」轉碼為「%s」(%d)\n"

#: libwget/encoding.c:261
#, c-format
msgid "toASCII(%s) failed (%d): %s\n"
msgstr "toASCII(%s) 失敗 (%d)：%s\n"

#: libwget/encoding.c:280
#, c-format
msgid "toASCII failed (%d): %s\n"
msgstr "toASCII 失敗 (%d)：%s\n"

#: libwget/encoding.c:283
#, c-format
msgid "Invalid UTF-8 sequence not converted: '%s'\n"
msgstr "無效的 UTF-8 序列未轉換：「%s」\n"

#: libwget/encoding.c:287
#, c-format
msgid "toASCII not available: '%s'\n"
msgstr "toASCII 無法使用：「%s」\n"

#: libwget/error.c:45
msgid "General error"
msgstr "一般錯誤"

#: libwget/error.c:46
msgid "No memory"
msgstr "記憶體不足"

#: libwget/error.c:47
msgid "Invalid value"
msgstr "無效值"

#: libwget/error.c:48
msgid "Timeout"
msgstr "逾時"

#: libwget/error.c:49
msgid "Connect error"
msgstr "連線錯誤"

#: libwget/error.c:50
msgid "Handshake error"
msgstr "交握錯誤"

#: libwget/error.c:51
msgid "Certificate error"
msgstr "憑證錯誤"

#: libwget/error.c:52
msgid "libwget has been built without TLS support"
msgstr "libwget 建置時未提供 TLS 支援"

#: libwget/error.c:53
msgid "Failed to parse XML"
msgstr "無法解析 XML"

#: libwget/error.c:54
msgid "Failed to open file"
msgstr "無法開啟檔案"

#: libwget/error.c:55
msgid "I/O error"
msgstr "I/O 錯誤"

#: libwget/error.c:56
msgid "Unsupported function"
msgstr "不支援的功能"

#: libwget/hash_printf.c:83
#, c-format
msgid "Failed to hash (%d)\n"
msgstr "無法計算雜湊值 (%d)\n"

#: libwget/hash_printf.c:89
#, c-format
msgid "%s: Failed to malloc %zu bytes\n"
msgstr "%s：無法 malloc %zu 位元組\n"

#: libwget/hashfile.c:92
#, c-format
msgid "Unknown hash type '%s'\n"
msgstr "未知的雜湊類型「%s」\n"

#: libwget/hashfile.c:794 libwget/hpkp_db.c:159
#, c-format
msgid "%s: Unexpected hash len %zu > %zu\n"
msgstr "%s：非預期的雜湊長度 %zu > %zu\n"

#: libwget/hashfile.c:816
#, c-format
msgid "%s: Hash init failed for type '%s': %s\n"
msgstr "%s：類型「%s」的雜湊初始化失敗：%s\n"

#: libwget/hashfile.c:822
#, c-format
msgid "%s: Hash update failed: %s\n"
msgstr "%s：雜湊更新失敗：%s\n"

#: libwget/hashfile.c:833
#, c-format
msgid "%s: Hash finalization failed: %s\n"
msgstr "%s：雜湊結束作業失敗：%s\n"

#: libwget/hashfile.c:838
#, c-format
msgid "%s: Failed to read %llu bytes\n"
msgstr "%s：無法讀取 %llu 位元組\n"

#: libwget/hpkp_db.c:311
#, c-format
msgid "HPKP: could not parse host line '%s'\n"
msgstr "HPKP：無法解析主機列「%s」\n"

#: libwget/hpkp_db.c:317
#, c-format
msgid "HPKP: could not parse pin line '%s'\n"
msgstr "HPKP：無法解析釘選列「%s」\n"

#: libwget/hpkp_db.c:360
msgid "Failed to read HPKP data\n"
msgstr "無法讀取 HPKP 資料\n"

#: libwget/hpkp_db.c:450
#, c-format
msgid "Failed to write HPKP file '%s'\n"
msgstr "無法寫入 HPKP 檔案「%s」\n"

#: libwget/hsts.c:419 libwget/tls_session.c:332
#, c-format
msgid "Failed to parse HSTS line: '%s'\n"
msgstr "無法解析 HSTS 列：「%s」\n"

#: libwget/hsts.c:459
msgid "Failed to read HSTS data\n"
msgstr "無法讀取 HSTS 資料\n"

#: libwget/hsts.c:522
#, c-format
msgid "Failed to write HSTS file '%s'\n"
msgstr "無法寫入 HSTS 檔案「%s」\n"

#: libwget/http.c:184 libwget/http.c:194 libwget/http.c:203 libwget/http.c:212
#, c-format
msgid "%s: Unknown key %d (or value must not be an integer)\n"
msgstr "%s：未知的鍵值 %d（或該值不可為整數）\n"

#: libwget/http.c:309
#, c-format
msgid "Unsupported quality of protection '%s'.\n"
msgstr "不支援的保護等級「%s」。\n"

#: libwget/http.c:320
#, c-format
msgid "Unsupported algorithm '%s'.\n"
msgstr "不支援的演算法「%s」。\n"

#: libwget/http.c:412
#, c-format
msgid "Decompress failed [host: %s - resource: %s]\n"
msgstr "解壓縮失敗 [主機：%s - 資源：%s]\n"

#: libwget/http.c:483
#, c-format
msgid "Proxy connection failed with: %s\n"
msgstr "代理伺服器連線失敗：%s\n"

#: libwget/http.c:668
msgid "Failed to create request buffer\n"
msgstr "無法建立要求緩衝區\n"

#: libwget/http.c:839 libwget/tls_session.c:374
#, c-format
msgid "Failed to allocate %zu bytes\n"
msgstr "無法配置 %zu 位元組\n"

#: libwget/http.c:933
#, c-format
msgid "Failed to allocate %zu bytes (%s)\n"
msgstr "無法配置 %zu 位元組 (%s)\n"

#: libwget/http.c:956
#, c-format
msgid "Failed to convert chunk size '%.31s' (%s)\n"
msgstr "無法轉換區塊大小「%.31s」(%s)\n"

#: libwget/http.c:994
#, c-format
msgid "Chunk size overflow: %zX (%s)\n"
msgstr "區塊大小溢位：%zX (%s)\n"

#: libwget/http.c:1036
#, c-format
msgid "Expected end-of-chunk not found (%s)\n"
msgstr "找不到預期的區塊結尾 (%s)\n"

#: libwget/http.c:1084
#, c-format
msgid "Failed to read %zd bytes (%d) (%s)\n"
msgstr "無法讀取 %zd 位元組 (%d) (%s)\n"

#: libwget/http.c:1090
#, c-format
msgid "Just got %zu of %zu bytes (%s)\n"
msgstr "只取得 %zu / %zu 位元組 (%s)\n"

#: libwget/http.c:1095
#, c-format
msgid "Body too large: %zu instead of %zu bytes (%s)\n"
msgstr "內容過大：%zu 位元組而非預期的 %zu 位元組 (%s)\n"

#: libwget/http2.c:200
msgid "Failed to create HTTP2 callbacks\n"
msgstr "無法建立 HTTP2 回呼\n"

#: libwget/http2.c:209
#, c-format
msgid "Failed to create HTTP2 client session (%d)\n"
msgstr "無法建立 HTTP2 用戶端工作階段 (%d)\n"

#: libwget/http2.c:220
#, c-format
msgid "Failed to submit HTTP2 client settings (%d)\n"
msgstr "無法送出 HTTP2 用戶端設定 (%d)\n"

#: libwget/http2.c:240
#, c-format
msgid "Failed to terminate HTTP2 session (%d)\n"
msgstr "無法終止 HTTP2 工作階段 (%d)\n"

#: libwget/http2.c:289
#, c-format
msgid "Failed to allocate nvs[%d]\n"
msgstr "無法配置 nvs[%d]\n"

#: libwget/http2.c:295
#, c-format
msgid "Failed to allocate resource[%zu]\n"
msgstr "無法配置 resource[%zu]\n"

#: libwget/http2.c:360
msgid "Failed to submit HTTP2 request\n"
msgstr "無法送出 HTTP2 要求\n"

#: libwget/http_highlevel.c:45
#, c-format
msgid "Failed to fwrite %zu bytes of data (%d)\n"
msgstr "無法 fwrite %zu 位元組的資料 (%d)\n"

#: libwget/http_highlevel.c:60
#, c-format
msgid "Failed to write %zu bytes of data (%d)\n"
msgstr "無法寫入 %zu 位元組的資料 (%d)\n"

#: libwget/http_highlevel.c:165
#, c-format
msgid "Unknown option %d\n"
msgstr "未知的選項 %d\n"

#: libwget/http_highlevel.c:175
msgid "Error parsing URL\n"
msgstr "解析 URL 時發生錯誤\n"

#: libwget/http_highlevel.c:182
msgid "Missing URL/URI\n"
msgstr "缺少 URL/URI\n"

#: libwget/http_parse.c:865 libwget/http_parse.c:890
#, c-format
msgid "Failed to parse date '%s'\n"
msgstr "無法解析日期「%s」\n"

#: libwget/http_parse.c:1273
msgid "HTTP response header not found\n"
msgstr "找不到 HTTP 回應標頭\n"

#: libwget/init.c:137 src/options.c:3694
#, c-format
msgid "Failed to init DNS cache (%d)"
msgstr "無法初始化 DNS 快取 (%d)"

#: libwget/init.c:172 libwget/init.c:246 libwget/init.c:271 libwget/init.c:286
#, c-format
msgid "%s: Unknown option %d"
msgstr "%s：未知的選項 %d"

#: libwget/init.c:191
#, c-format
msgid "%s: Failed to init networking (%d)"
msgstr "%s：無法初始化網路功能 (%d)"

#: libwget/init.c:229
#, c-format
msgid "%s: Failed to deinit networking (%d)"
msgstr "%s：無法反初始化網路功能 (%d)"

#: libwget/io.c:126
#, c-format
msgid "%s: Failed to read, error %d\n"
msgstr "%s：無法讀取，錯誤 %d\n"

#: libwget/io.c:346
#, c-format
msgid "WARNING: Size of %s changed from %lld to %lld while reading. This may lead to unwanted results !\n"
msgstr "警告：讀取期間 %s 的大小從 %lld 變成 %lld。這可能導致非預期的結果！\n"

#: libwget/io.c:349
#, c-format
msgid "Failed to fstat %s\n"
msgstr "無法 fstat %s\n"

#: libwget/io.c:438
#, c-format
msgid "Failed to create '%s' (%d)\n"
msgstr "無法建立「%s」(%d)\n"

#: libwget/io.c:445
#, c-format
msgid "Failed to lock '%s' (%d)\n"
msgstr "無法鎖定「%s」(%d)\n"

#: libwget/io.c:454
#, c-format
msgid "Failed to read open '%s' (%d)\n"
msgstr "無法讀取已開啟的「%s」(%d)\n"

#: libwget/io.c:477
#, c-format
msgid "Failed to open tmpfile '%s' (%d)\n"
msgstr "無法開啟暫存檔「%s」(%d)\n"

#: libwget/io.c:486
#, c-format
msgid "Failed to write open '%s' (%d)\n"
msgstr "無法寫入已開啟的「%s」(%d)\n"

#: libwget/io.c:502
#, c-format
msgid "Failed to write/close '%s' (%d)\n"
msgstr "無法寫入／關閉「%s」(%d)\n"

#: libwget/io.c:510
#, c-format
msgid "Failed to rename '%s' to '%s' (%d)\n"
msgstr "無法將「%s」重新命名為「%s」(%d)\n"

#: libwget/io.c:511
#, c-format
msgid "Take manually care for '%s'\n"
msgstr "請自行手動處理「%s」\n"

#: libwget/iri.c:629
msgid "Port number must be in the range 1..65535\n"
msgstr "埠號必須在 1 到 65535 的範圍內\n"

#: libwget/iri.c:663
#, c-format
msgid "Missing host/domain in URI '%s'\n"
msgstr "URI「%s」缺少主機／網域\n"

#: libwget/net.c:133
#, c-format
msgid "%s (hostname='%s', ip=%s, errno=%d)\n"
msgstr "%s（主機名稱=「%s」，IP=%s，errno=%d）\n"

#: libwget/net.c:140
#, c-format
msgid "%s (hostname='%s', errno=%d)\n"
msgstr "%s（主機名稱=「%s」，errno=%d）\n"

#: libwget/net.c:608 libwget/net.c:616
msgid "Failed to set socket to non-blocking\n"
msgstr "無法將 socket 設為非阻塞\n"

#: libwget/net.c:613
msgid "Failed to get socket flags\n"
msgstr "無法取得 socket 旗標\n"

#: libwget/net.c:625
msgid "Failed to set socket option REUSEADDR\n"
msgstr "無法設定 socket 選項 REUSEADDR\n"

#: libwget/net.c:629
msgid "Failed to set socket option NODELAY\n"
msgstr "無法設定 socket 選項 NODELAY\n"

#: libwget/net.c:634
msgid "Failed to set socket option BINDTODEVICE\n"
msgstr "無法設定 socket 選項 BINDTODEVICE\n"

#: libwget/net.c:639
msgid "Unsupported socket option BINDTODEVICE\n"
msgstr "不支援 socket 選項 BINDTODEVICE\n"

#: libwget/net.c:654
msgid "Failed to set socket option SO_SNDTIMEO\n"
msgstr "無法設定 socket 選項 SO_SNDTIMEO\n"

#: libwget/net.c:780
msgid "Failed to create socket"
msgstr "無法建立 socket"

#: libwget/net.c:793
msgid "Failed to bind"
msgstr "無法繫結"

#: libwget/net.c:805 libwget/net.c:979
msgid "Failed to connect"
msgstr "無法連線"

#: libwget/net.c:918
#, c-format
msgid "Failed to read %zu bytes (hostname='%s', ip=%s, errno=%d)\n"
msgstr "無法讀取 %zu 位元組（主機名稱=「%s」，IP=%s，errno=%d）\n"

#: libwget/net.c:1001
#, c-format
msgid "Failed to send %zu bytes (hostname='%s', ip=%s, errno=%d)\n"
msgstr "無法送出 %zu 位元組（主機名稱=「%s」，IP=%s，errno=%d）\n"

#: libwget/net.c:1043
#, c-format
msgid "%s: internal error: length mismatch %zu != %zd\n"
msgstr "%s：內部錯誤：長度不符 %zu != %zd\n"

#: libwget/metalink.c:134
#, c-format
msgid "Mirror scheme not supported: '%s'\n"
msgstr "不支援的鏡像架構：「%s」\n"

#: libwget/metalink.c:308
msgid "Error in parsing XML"
msgstr "解析 XML 時發生錯誤"

#: libwget/ocsp.c:469
#, c-format
msgid "Failed to parse OCSP line: '%s'\n"
msgstr "無法解析 OCSP 列：「%s」\n"

#: libwget/ocsp.c:515
msgid "Failed to read OCSP hosts\n"
msgstr "無法讀取 OCSP 主機\n"

#: libwget/ocsp.c:522
msgid "Failed to read OCSP fingerprints\n"
msgstr "無法讀取 OCSP 指紋\n"

#: libwget/ocsp.c:609
#, c-format
msgid "Failed to write to OCSP hosts to '%s'\n"
msgstr "無法將 OCSP 主機寫入「%s」\n"

#: libwget/ocsp.c:616
#, c-format
msgid "Failed to write to OCSP fingerprints to '%s'\n"
msgstr "無法將 OCSP 指紋寫入「%s」\n"

#: libwget/pipe.c:85
#, c-format
msgid "Failed to create pipe for STDIN on %s\n"
msgstr "無法在 %s 上為 STDIN 建立管線\n"

#: libwget/pipe.c:89
#, c-format
msgid "Failed to create pipe for STDOUT on %s\n"
msgstr "無法在 %s 上為 STDOUT 建立管線\n"

#: libwget/pipe.c:97
#, c-format
msgid "Failed to create pipe for STDERR on %s\n"
msgstr "無法在 %s 上為 STDERR 建立管線\n"

#: libwget/pipe.c:115 libwget/pipe.c:125 libwget/pipe.c:136
#, c-format
msgid "Failed to dup2(%d,%d) (%d)\n"
msgstr "無法 dup2(%d,%d) (%d)\n"

#: libwget/pipe.c:163
#, c-format
msgid "Failed to fork '%s'\n"
msgstr "無法 fork「%s」\n"

#: libwget/ssl_gnutls.c:218 libwget/ssl_wolfssl.c:205
#, c-format
msgid "Unknown config key %d (or value must not be a string)\n"
msgstr "未知的設定鍵 %d（或該值不可為字串）\n"

#: libwget/ssl_gnutls.c:252 libwget/ssl_wolfssl.c:239
#, c-format
msgid "Unknown config key %d (or value must not be an object)\n"
msgstr "未知的設定鍵 %d（或該值不可為物件）\n"

#: libwget/ssl_gnutls.c:308 libwget/ssl_wolfssl.c:287
#, c-format
msgid "Unknown config key %d (or value must not be an integer)\n"
msgstr "未知的設定鍵 %d（或該值不可為整數）\n"

#: libwget/ssl_gnutls.c:355
#, c-format
msgid "Certificate info [%u]:\n"
msgstr "憑證資訊 [%u]：\n"

#: libwget/ssl_gnutls.c:358
#, c-format
msgid "  Valid since: %s"
msgstr "  有效起始：%s"

#: libwget/ssl_gnutls.c:361
#, c-format
msgid "  Expires: %s"
msgstr "  到期：%s"

#: libwget/ssl_gnutls.c:368
#, c-format
msgid "  Fingerprint: %s\n"
msgstr "  指紋：%s\n"

#: libwget/ssl_gnutls.c:376
#, c-format
msgid "  Serial number: %s\n"
msgstr "  序號：%s\n"

#: libwget/ssl_gnutls.c:381
#, c-format
msgid "  Public key: %s, %s (%u bits)\n"
msgstr "  公開金鑰：%s，%s (%u 位元)\n"

#: libwget/ssl_gnutls.c:386
#, c-format
msgid "  Version: #%d\n"
msgstr "  版本：#%d\n"

#: libwget/ssl_gnutls.c:390
#, c-format
msgid "  DN: %s\n"
msgstr "  DN：%s\n"

#: libwget/ssl_gnutls.c:394
#, c-format
msgid "  Issuer's DN: %s\n"
msgstr "  簽發者 DN：%s\n"

#: libwget/ssl_gnutls.c:398
#, c-format
msgid "  Issuer's OID: %s\n"
msgstr "  簽發者 OID：%s\n"

#: libwget/ssl_gnutls.c:402
#, c-format
msgid "  Issuer's UID: %s\n"
msgstr "  簽發者 UID：%s\n"

#: libwget/ssl_gnutls.c:414
#, c-format
msgid "  Unknown certificate type %d\n"
msgstr "  未知的憑證類型 %d\n"

#: libwget/ssl_gnutls.c:431 libwget/ssl_gnutls.c:503 libwget/ssl_gnutls.c:532
msgid "----\n"
msgstr "----\n"

#: libwget/ssl_gnutls.c:439
msgid "TLS/IA session\n"
msgstr "TLS/IA 工作階段\n"

#: libwget/ssl_gnutls.c:444
#, c-format
msgid "SRP session with username %s\n"
msgstr "使用者名稱 %s 的 SRP 工作階段\n"

#: libwget/ssl_gnutls.c:452
#, c-format
msgid "PSK authentication. PSK hint '%s'\n"
msgstr "PSK 驗證。PSK 提示「%s」\n"

#: libwget/ssl_gnutls.c:457
#, c-format
msgid "PSK authentication. Connected as '%s'\n"
msgstr "PSK 驗證。已以「%s」身分連線\n"

#: libwget/ssl_gnutls.c:469
msgid "Anonymous authentication.\n"
msgstr "匿名驗證。\n"

#: libwget/ssl_gnutls.c:497
msgid "Transport authentication failure\n"
msgstr "傳輸層驗證失敗\n"

#: libwget/ssl_gnutls.c:499
#, c-format
msgid "Unsupported credential type %d.\n"
msgstr "不支援的憑證類型 %d。\n"

#: libwget/ssl_gnutls.c:506
#, c-format
msgid "Ephemeral DH using prime of %d bits\n"
msgstr "使用 %d 位元質數的暫時性 DH\n"

#: libwget/ssl_gnutls.c:509
#, c-format
msgid "Ephemeral ECDH using curve %s\n"
msgstr "使用曲線 %s 的暫時性 ECDH\n"

#: libwget/ssl_gnutls.c:514
#, c-format
msgid "Key Exchange: %s\n"
msgstr "金鑰交換：%s\n"

#: libwget/ssl_gnutls.c:518
#, c-format
msgid "Protocol: %s\n"
msgstr "協定：%s\n"

#: libwget/ssl_gnutls.c:522
#, c-format
msgid "Certificate Type: %s\n"
msgstr "憑證類型：%s\n"

#: libwget/ssl_gnutls.c:526
#, c-format
msgid "Cipher: %s\n"
msgstr "加密演算法：%s\n"

#: libwget/ssl_gnutls.c:530
#, c-format
msgid "MAC: %s\n"
msgstr "MAC：%s\n"

#: libwget/ssl_gnutls.c:888
#, c-format
msgid "Failed to import pubkey: %s\n"
msgstr "無法匯入公開金鑰：%s\n"

#: libwget/ssl_gnutls.c:896 libwget/ssl_gnutls.c:908 libwget/ssl_gnutls.c:916
#, c-format
msgid "Failed to export pubkey: %s\n"
msgstr "無法匯出公開金鑰：%s\n"

#: libwget/ssl_gnutls.c:966
msgid "ERROR"
msgstr "錯誤"

#: libwget/ssl_gnutls.c:966
msgid "WARNING"
msgstr "警告"

#: libwget/ssl_gnutls.c:986
#, c-format
msgid "%s: Certificate verification error\n"
msgstr "%s：憑證驗證錯誤\n"

#: libwget/ssl_gnutls.c:1038
#, c-format
msgid "DANE verification print error for %s: %s\n"
msgstr "%s 的 DANE 驗證發生列印錯誤：%s\n"

#: libwget/ssl_gnutls.c:1040
#, c-format
msgid "DANE verification failed for %s: %s\n"
msgstr "%s 的 DANE 驗證失敗：%s\n"

#: libwget/ssl_gnutls.c:1057
#, c-format
msgid "%s: The certificate is not trusted.\n"
msgstr "%s：此憑證不受信任。\n"

#: libwget/ssl_gnutls.c:1059
#, c-format
msgid "%s: The certificate has been revoked.\n"
msgstr "%s：此憑證已被撤銷。\n"

#: libwget/ssl_gnutls.c:1061
#, c-format
msgid "%s: The certificate doesn't have a known issuer.\n"
msgstr "%s：此憑證沒有已知的簽發者。\n"

#: libwget/ssl_gnutls.c:1063
#, c-format
msgid "%s: The certificate signer was not a CA.\n"
msgstr "%s：憑證簽署者並非 CA。\n"

#: libwget/ssl_gnutls.c:1065
#, c-format
msgid "%s: The certificate was signed using an insecure algorithm.\n"
msgstr "%s：此憑證以不安全的演算法簽署。\n"

#: libwget/ssl_gnutls.c:1067
#, c-format
msgid "%s: The certificate is not yet activated.\n"
msgstr "%s：此憑證尚未啟用。\n"

#: libwget/ssl_gnutls.c:1069
#, c-format
msgid "%s: The certificate has expired.\n"
msgstr "%s：此憑證已過期。\n"

#: libwget/ssl_gnutls.c:1072
#, c-format
msgid "%s: The certificate signature is invalid.\n"
msgstr "%s：憑證簽章無效。\n"

#: libwget/ssl_gnutls.c:1074
#, c-format
msgid "%s: The certificate's owner does not match hostname '%s'.\n"
msgstr "%s：憑證擁有者與主機名稱「%s」不符。\n"

#: libwget/ssl_gnutls.c:1086
#, c-format
msgid "%s: The certificate could not be verified (0x%X).\n"
msgstr "%s：無法驗證憑證 (0x%X)。\n"

#: libwget/ssl_gnutls.c:1097
#, c-format
msgid "%s: Certificate must be X.509\n"
msgstr "%s：憑證必須是 X.509\n"

#: libwget/ssl_gnutls.c:1102
#, c-format
msgid "%s: Error initializing X.509 certificate\n"
msgstr "%s：初始化 X.509 憑證時發生錯誤\n"

#: libwget/ssl_gnutls.c:1108
#, c-format
msgid "%s: No certificate was found!\n"
msgstr "%s：找不到憑證！\n"

#: libwget/ssl_gnutls.c:1113
#, c-format
msgid "%s: Failed to parse certificate: %s\n"
msgstr "%s：無法解析憑證：%s\n"

#: libwget/ssl_gnutls.c:1137
msgid "WARNING: The certificate's (stapled) OCSP status is invalid\n"
msgstr "警告：憑證的（附帶）OCSP 狀態無效\n"

#: libwget/ssl_gnutls.c:1144
#, c-format
msgid "WARNING: OCSP stapling is not supported by '%s', but OCSP validation has been requested.\n"
msgstr "警告：「%s」不支援 OCSP 附帶，但已要求 OCSP 驗證。\n"

#: libwget/ssl_gnutls.c:1145
msgid "WARNING: This implies a privacy leak: the client sends the certificate serial ID over HTTP to the CA.\n"
msgstr "警告：這會洩漏隱私：用戶端會以 HTTP 將憑證序號傳送給 CA。\n"

#: libwget/ssl_gnutls.c:1158
#, c-format
msgid "%s: Failed to parse certificate[%u]: %s\n"
msgstr "%s：無法解析憑證[%u]：%s\n"

#: libwget/ssl_gnutls.c:1244
#, c-format
msgid "%s: Pubkey pinning mismatch!\n"
msgstr "%s：公開金鑰釘選不符！\n"

#: libwget/ssl_gnutls.c:1307
msgid "GnuTLS requires the key and the cert to be of the same type.\n"
msgstr "GnuTLS 要求金鑰與憑證為相同類型。\n"

#: libwget/ssl_gnutls.c:1311
msgid "No certificates or keys were found\n"
msgstr "找不到任何憑證或金鑰\n"

#: libwget/ssl_gnutls.c:1318
#, c-format
msgid "No CAs were found in '%s'\n"
msgstr "在「%s」中找不到任何 CA\n"

#: libwget/ssl_gnutls.c:1385
#, c-format
msgid "Failed to allocate file name for cert '%s/%s'\n"
msgstr "無法配置憑證「%s/%s」的檔案名稱\n"

#: libwget/ssl_gnutls.c:1404
#, c-format
msgid "Failed to opendir %s\n"
msgstr "無法 opendir %s\n"

#: libwget/ssl_gnutls.c:1411
#, c-format
msgid "Failed to load CRL '%s': (%d)\n"
msgstr "無法載入 CRL「%s」(%d)\n"

#: libwget/ssl_gnutls.c:1453
#, c-format
msgid "GnuTLS: Unsupported priority string '%s': %s\n"
msgstr "GnuTLS：不支援的優先權字串「%s」：%s\n"

#: libwget/ssl_gnutls.c:1457
#, c-format
msgid "GnuTLS: Unsupported default priority 'NULL': %s\n"
msgstr "GnuTLS：不支援的預設優先權「NULL」：%s\n"

#: libwget/ssl_gnutls.c:1708 libwget/ssl_gnutls.c:1714
msgid "TLS False Start requested but libwget built with insufficient GnuTLS version\n"
msgstr "已要求 TLS False Start，但 libwget 的 GnuTLS 版本過舊\n"

#: libwget/ssl_gnutls.c:1719
#, c-format
msgid "GnuTLS: Failed to set priorities: %s\n"
msgstr "GnuTLS：無法設定優先權：%s\n"

#: libwget/ssl_gnutls.c:1752
msgid "WARNING: OCSP is not available in this version of GnuTLS.\n"
msgstr "警告：此 GnuTLS 版本不提供 OCSP。\n"

#: libwget/ssl_gnutls.c:1819
#, c-format
msgid "GnuTLS: Failed to set session data: %s\n"
msgstr "GnuTLS：無法設定工作階段資料：%s\n"

#: libwget/ssl_wolfssl.c:631
msgid "Missing TLS method\n"
msgstr "缺少 TLS 方法\n"

#: libwget/ssl_wolfssl.c:637
msgid "Failed to create WOLFSSL_CTX\n"
msgstr "無法建立 WOLFSSL_CTX\n"

#: libwget/ssl_wolfssl.c:652
#, c-format
msgid "WolfSSL: Failed to set ciphers '%s'\n"
msgstr "WolfSSL：無法設定加密演算法「%s」\n"

#: libwget/ssl_wolfssl.c:663
msgid "Failed to load system certs\n"
msgstr "無法載入系統憑證\n"

#: libwget/ssl_wolfssl.c:689
msgid "Skipped loading CA certs. SSL verification will likely fail.\n"
msgstr "已略過載入 CA 憑證，SSL 驗證可能會失敗。\n"

#: libwget/ssl_wolfssl.c:695
#, c-format
msgid "Failed to load CA pem: %s or cert dir: %s, SSL verification will likely fail.\n"
msgstr "無法載入 CA pem：%s 或憑證目錄：%s，SSL 驗證可能會失敗。\n"

#: libwget/ssl_wolfssl.c:934
msgid "Failed to create WolfSSL session\n"
msgstr "無法建立 WolfSSL 工作階段\n"

#: libwget/ssl_wolfssl.c:1068
#, c-format
msgid "failed to connect TLS (%d): %s\n"
msgstr "無法連線 TLS (%d)：%s\n"

#: libwget/ssl_openssl.c:246 libwget/ssl_openssl.c:286
#: libwget/ssl_openssl.c:365
#, c-format
msgid "Unknown configuration key %d (maybe this config value should be of another type?)\n"
msgstr "未知的設定鍵 %d（或許這個設定值該是其他類型？）\n"

#: libwget/ssl_openssl.c:414
msgid "OpenSSL: TLS 1.3 is not supported by your OpenSSL version. Will use TLS 1.2 instead.\n"
msgstr "OpenSSL：您的 OpenSSL 版本不支援 TLS 1.3，將改用 TLS 1.2。\n"

#: libwget/ssl_openssl.c:424
#, c-format
msgid "OpenSSL: Invalid priority string '%s'\n"
msgstr "OpenSSL：無效的優先權字串「%s」\n"

#: libwget/ssl_openssl.c:486
#, c-format
msgid "OpenSSL: Could not load certificates from default paths. Falling back to '%s'."
msgstr "OpenSSL：無法從預設路徑載入憑證，改用「%s」。"

#: libwget/ssl_openssl.c:491
#, c-format
msgid "OpenSSL: No certificates could be loaded from directory '%s'\n"
msgstr "OpenSSL：無法從目錄「%s」載入任何憑證\n"

#: libwget/ssl_openssl.c:495
#, c-format
msgid "OpenSSL: Could not open directory '%s'. No certificates were loaded.\n"
msgstr "OpenSSL：無法開啟目錄「%s」，未載入任何憑證。\n"

#: libwget/ssl_openssl.c:686
msgid "Could not get user data to verify stapled OCSP.\n"
msgstr "無法取得使用者資料以驗證附帶的 OCSP。\n"

#: libwget/ssl_openssl.c:698
msgid "Got a stapled OCSP response, but could not parse it. Aborting.\n"
msgstr "取得附帶的 OCSP 回應，但無法解析，中止。\n"

#: libwget/ssl_openssl.c:704
msgid "Could not get server's cert stack\n"
msgstr "無法取得伺服器的憑證堆疊\n"

#: libwget/ssl_openssl.c:716
msgid "Could not verify stapled OCSP response. Aborting.\n"
msgstr "無法驗證附帶的 OCSP 回應，中止。\n"

#: libwget/ssl_openssl.c:878
msgid "ERROR: print_openssl_time: BIO_read failed\n"
msgstr "錯誤：print_openssl_time：BIO_read 失敗\n"

#: libwget/ssl_openssl.c:892
msgid "Could not get current time!\n"
msgstr "無法取得目前時間！\n"

#: libwget/ssl_openssl.c:901
msgid "Could not compute time difference for thisUpd. Aborting.\n"
msgstr "無法計算 thisUpd 的時間差，中止。\n"

#: libwget/ssl_openssl.c:905
msgid "*** OCSP response thisUpd is too old. Aborting.\n"
msgstr "*** OCSP 回應的 thisUpd 過舊，中止。\n"

#: libwget/ssl_openssl.c:916
msgid "Could not compute time difference for nextUpd. Aborting.\n"
msgstr "無法計算 nextUpd 的時間差，中止。\n"

#: libwget/ssl_openssl.c:921
msgid "*** OCSP next update is in the past!\n"
msgstr "*** OCSP 的下次更新時間已過！\n"

#: libwget/ssl_openssl.c:951
msgid "Unsuccessful OCSP response\n"
msgstr "OCSP 回應不成功\n"

#: libwget/ssl_openssl.c:959
msgid "Could not verify OCSP certificate chain\n"
msgstr "無法驗證 OCSP 憑證鏈\n"

#: libwget/ssl_openssl.c:965
msgid "Could not parse OCSP single response\n"
msgstr "無法解析 OCSP 單一回應\n"

#: libwget/ssl_openssl.c:972
msgid "Could not obtain OCSP response status\n"
msgstr "無法取得 OCSP 回應狀態\n"

#: libwget/ssl_openssl.c:987
msgid "Could not get 'thisUpd' from OCSP response. Cannot check time.\n"
msgstr "無法從 OCSP 回應取得「thisUpd」，無法檢查時間。\n"

#: libwget/ssl_openssl.c:1047
msgid "Could not obtain OCSP_BASICRESPONSE\n"
msgstr "無法取得 OCSP_BASICRESPONSE\n"

#: libwget/ssl_openssl.c:1053
msgid "OCSP nonce does not match\n"
msgstr "OCSP nonce 不相符\n"

#: libwget/ssl_openssl.c:1198 libwget/ssl_openssl.c:1233
#, c-format
msgid "Could not compute certificate fingerprint for cert %u\n"
msgstr "無法計算憑證 %u 的指紋\n"

#: libwget/ssl_openssl.c:1267
msgid "Certificate check disabled. Peer's certificate will NOT be checked.\n"
msgstr "憑證檢查已停用，將不會檢查對方的憑證。\n"

#: libwget/ssl_openssl.c:1273
msgid "OpenSSL: Could not obtain cert store\n"
msgstr "OpenSSL：無法取得憑證存放區\n"

#: libwget/ssl_openssl.c:1286
#, c-format
msgid "Could not load CRL from '%s' (%d)\n"
msgstr "無法從「%s」載入 CRL (%d)\n"

#: libwget/ssl_openssl.c:1302
#, c-format
msgid "Could not load CA certificate from file '%s'\n"
msgstr "無法從檔案「%s」載入 CA 憑證\n"

#: libwget/ssl_openssl.c:1355
msgid "Could not initialize OpenSSL\n"
msgstr "無法初始化 OpenSSL\n"

#: libwget/ssl_openssl.c:1406
msgid "OpenSSL: Could not parse cached session data.\n"
msgstr "OpenSSL：無法解析快取的工作階段資料。\n"

#: libwget/ssl_openssl.c:1414
msgid "OpenSSL: Could not set session data.\n"
msgstr "OpenSSL：無法設定工作階段資料。\n"

#: libwget/ssl_openssl.c:1629
msgid "Host name check disabled. Server certificate's subject name will not be checked.\n"
msgstr "主機名稱檢查已停用，將不會檢查伺服器憑證的主體名稱。\n"

#: libwget/ssl_openssl.c:1638
msgid "Could not set 'status_request' extension\n"
msgstr "無法設定「status_request」擴充\n"

#: libwget/ssl_openssl.c:1644
msgid "SNI could not be sent"
msgstr "無法送出 SNI"

#: libwget/ssl_openssl.c:1648
msgid "ALPN offering could not be sent"
msgstr "無法送出 ALPN 提議"

#: libwget/ssl_openssl.c:1656
msgid "Could not get cached TLS session"
msgstr "無法取得快取的 TLS 工作階段"

#: libwget/ssl_openssl.c:1678
#, c-format
msgid "Could not complete TLS handshake: %s\n"
msgstr "無法完成 TLS 交握：%s\n"

#: libwget/ssl_openssl.c:1696
msgid "Public key pinning mismatch\n"
msgstr "公開金鑰釘選不符\n"

#: libwget/ssl_openssl.c:1715
msgid "Aborting handshake. Could not verify OCSP chain.\n"
msgstr "中止交握，無法驗證 OCSP 鏈。\n"

#: libwget/ssl_openssl.c:1874
#, c-format
msgid "TLS read error: %s\n"
msgstr "TLS 讀取錯誤：%s\n"

#: libwget/ssl_openssl.c:1908
#, c-format
msgid "TLS write error: %s\n"
msgstr "TLS 寫入錯誤：%s\n"

#: libwget/tls_session.c:355
msgid "Failed to read TLS session data\n"
msgstr "無法讀取 TLS 工作階段資料\n"

#: libwget/tls_session.c:418
#, c-format
msgid "Failed to write TLS session file '%s'\n"
msgstr "無法寫入 TLS 工作階段檔案「%s」\n"

#: libwget/xml.c:661
#, c-format
msgid "Failed to allocate %zu bytes for XML parse buffer\n"
msgstr "無法為 XML 解析緩衝區配置 %zu 位元組\n"

#: src/bar.c:124
msgid "Cannot create progress bar thread. Disabling progress bar.\n"
msgstr "無法建立進度列執行緒，已停用進度列。\n"

#: src/dl.c:41
#, c-format
msgid "Piling up error '%s' over error '%s'"
msgstr "將錯誤「%s」疊加在錯誤「%s」之上"

#: src/gpgme.c:60
msgid "GPGME Failure\n"
msgstr "GPGME 失敗\n"

#: src/gpgme.c:64
#, c-format
msgid "%s: Invalid signature\n"
msgstr "%s：無效的簽章\n"

#: src/gpgme.c:67
#, c-format
msgid "%s: Key %s expired\n"
msgstr "%s：金鑰 %s 已過期\n"

#: src/gpgme.c:70
#, c-format
msgid "%s: Expired signature\n"
msgstr "%s：簽章已過期\n"

#: src/gpgme.c:73
#, c-format
msgid "%s: Key %s missing\n"
msgstr "%s：找不到金鑰 %s\n"

#: src/gpgme.c:76
#, c-format
msgid "%s: Unhandled failure\n"
msgstr "%s：未處理的失敗\n"

#: src/gpgme.c:117
msgid "Invalid signature, signature file must have a sig extension\n"
msgstr "無效的簽章，簽章檔案必須有 .sig 副檔名\n"

#: src/gpgme.c:156
msgid "Failed to init gpgme context\n"
msgstr "無法初始化 gpgme 情境\n"

#: src/gpgme.c:171
msgid "Couldn't specify gnupg homedir\n"
msgstr "無法指定 gnupg 的家目錄\n"

#: src/gpgme.c:177
#, c-format
msgid "Couldn't canonicalize %s. (Does the path exist?)\n"
msgstr "無法將 %s 正規化。（該路徑是否存在？）\n"

#: src/gpgme.c:186
msgid "Error during verification\n"
msgstr "驗證期間發生錯誤\n"

#: src/gpgme.c:194
msgid "GPGME verify failed!\n"
msgstr "GPGME 驗證失敗！\n"

#: src/gpgme.c:273
#, c-format
msgid "Unsupported protocol type for content: %s\n"
msgstr "不支援的內容協定類型：%s\n"

#: src/gpgme.c:281
msgid "Couldn't correct signature file!\n"
msgstr "無法修正簽章檔案！\n"

#: src/gpgme.c:290
#, c-format
msgid "Failed to read file to verify sig: %s\n"
msgstr "無法讀取要驗證簽章的檔案：%s\n"

#: src/host.c:393 src/wget.c:998
#, c-format
msgid "URL '%s' not followed (disallowed by robots.txt)\n"
msgstr "未跟隨 URL「%s」（robots.txt 不允許）\n"

#: src/job.c:186
#, c-format
msgid ""
"Failed to truncate %s\n"
" from %llu to %llu bytes\n"
msgstr ""
"無法將 %s\n"
"從 %llu 位元組截短為 %llu 位元組\n"

#: src/job.c:206
#, c-format
msgid "Checksum OK for '%s'\n"
msgstr "「%s」的檢查碼正確\n"

#: src/job.c:213
msgid "Failed to build checksum, assuming file to be OK\n"
msgstr "無法建立檢查碼，假設檔案正常\n"

#: src/job.c:218
#, c-format
msgid "Bad checksum for '%s'\n"
msgstr "「%s」的檢查碼錯誤\n"

#: src/job.c:236
#, c-format
msgid "Piece %d/%d not OK - requeuing\n"
msgstr "區段 %d/%d 不正確 - 重新排入佇列\n"

#: src/options.c:291
#, c-format
msgid "Value out of range (0-65535): %s\n"
msgstr "數值超出範圍 (0-65535)：%s\n"

#: src/options.c:355
#, c-format
msgid "Invalid byte specifier: %s\n"
msgstr "無效的位元組指定符：%s\n"

#: src/options.c:427
#, c-format
msgid "Ignoring invalid header: %s\n"
msgstr "已忽略無效的標頭：%s\n"

#: src/options.c:436
#, c-format
msgid "No value in header (ignoring): %s\n"
msgstr "標頭中沒有數值（已忽略）：%s\n"

#: src/options.c:680
#, c-format
msgid "Invalid value '%s'\n"
msgstr "無效值「%s」\n"

#: src/options.c:696
#, c-format
msgid "Invalid boolean value '%s'\n"
msgstr "無效的布林值「%s」\n"

#: src/options.c:738
#, c-format
msgid "Invalid time specifier in '%s'\n"
msgstr "「%s」中的時間指定符無效\n"

#: src/options.c:768
#, c-format
msgid "Unknown cert type '%s'\n"
msgstr "未知的憑證類型「%s」\n"

#: src/options.c:785
#, c-format
msgid "Unsupported regex type '%s'\n"
msgstr "不支援的常規運算式類型「%s」\n"

#: src/options.c:795
msgid "Empty progress type\n"
msgstr "進度類型為空\n"

#: src/options.c:809
#, c-format
msgid "Progress type '%s' ignored. It is not implemented yet\n"
msgstr "已忽略進度類型「%s」，此功能尚未實作\n"

#: src/options.c:811
#, c-format
msgid "Unknown progress type '%s'\n"
msgstr "未知的進度類型「%s」\n"

#: src/options.c:824
msgid "Missing restrict-file-name type\n"
msgstr "缺少 restrict-file-name 類型\n"

#: src/options.c:854
#, c-format
msgid "Unknown restrict-file-name type '%s'\n"
msgstr "未知的 restrict-file-name 類型「%s」\n"

#: src/options.c:860
msgid "Restrict file names to either 'unix' or 'windows'\n"
msgstr "將檔名限制為「unix」或「windows」\n"

#: src/options.c:865
msgid "Restrict file names to either 'uppercase' or 'lowercase'\n"
msgstr "將檔名限制為「uppercase」或「lowercase」\n"

#: src/options.c:874
msgid "    use [none]|[unix|windows],[lowercase|uppercase],[nocontrol][,ascii].\n"
msgstr "    使用 [none]|[unix|windows],[lowercase|uppercase],[nocontrol][,ascii]。\n"

#: src/options.c:903
#, c-format
msgid "Unknown option '-n%c'\n"
msgstr "未知的選項「-n%c」\n"

#: src/options.c:923
#, c-format
msgid "Unknown address family '%s'\n"
msgstr "未知的位址族「%s」\n"

#: src/options.c:950
#, c-format
msgid "Unknown stats format '%s'\n"
msgstr "未知的統計格式「%s」\n"

#: src/options.c:980 src/options.c:998
#, c-format
msgid "Plugin '%s' failed to load: %s\n"
msgstr "外掛「%s」載入失敗：%s\n"

#: src/options.c:1059 src/options.c:1079
msgid "Missing required type specifier\n"
msgstr "缺少必要的類型指定符\n"

#: src/options.c:1063 src/options.c:1083
#, c-format
msgid "Invalid type specifier: %s\n"
msgstr "無效的類型指定符：%s\n"

#: src/options.c:1096
msgid "no-verify-sig cannot take additional arguments\n"
msgstr "no-verify-sig 不能接受額外引數\n"

#: src/options.c:1106
#, c-format
msgid "Invalid option specifier: %s\n"
msgstr "無效的選項指定符：%s\n"

#: src/options.c:1151
#, c-format
msgid "Compression type '%s' not supported\n"
msgstr "不支援的壓縮類型「%s」\n"

#: src/options.c:1154
#, c-format
msgid "Duplicate type '%s'"
msgstr "重複的類型「%s」"

#: src/options.c:1184
#, c-format
msgid "Lib for type %s not built"
msgstr "類型 %s 對應的程式庫未建置"

#: src/options.c:1216
#, c-format
msgid "Disallowed Value for --no-download-attr: %s\n"
msgstr "--no-download-attr 的不允許值：%s\n"

#: src/options.c:1225
#, c-format
msgid "Invalid value for --download-attr: %s\n"
msgstr "--download-attr 的無效值：%s\n"

#: src/options.c:2598 src/options.c:2633
#, c-format
msgid "Unknown option '%s'\n"
msgstr "未知的選項「%s」\n"

#: src/options.c:2648
#, c-format
msgid "Option 'no-%s' doesn't allow an argument\n"
msgstr "選項「no-%s」不接受引數\n"

#: src/options.c:2652
#, c-format
msgid "Option '%s' doesn't allow an argument\n"
msgstr "選項「%s」不接受引數\n"

#: src/options.c:2663
#, c-format
msgid "Missing argument for option '%s'\n"
msgstr "選項「%s」缺少引數\n"

#: src/options.c:2729
#, c-format
msgid "Failed to parse: '%s'\n"
msgstr "無法解析：「%s」\n"

#: src/options.c:2791
#, c-format
msgid "Config file recursion detected in %s\n"
msgstr "在 %s 中偵測到設定檔遞迴\n"

#: src/options.c:2818
#, c-format
msgid "Failed to open %s (%d): %s\n"
msgstr "無法開啟 %s (%d)：%s\n"

#: src/options.c:2882
#, c-format
msgid "Failed to parse last line in '%s'\n"
msgstr "無法解析「%s」的最後一列\n"

#: src/options.c:2962
#, c-format
msgid "Missing argument(s) for option '-%c'\n"
msgstr "選項「-%c」缺少引數\n"

#: src/options.c:2982
#, c-format
msgid "Unknown option '-%c'\n"
msgstr "未知的選項「-%c」\n"

#: src/options.c:3013
#, c-format
msgid "Password for user \"%s\": "
msgstr "使用者 %s 的密碼："

#: src/options.c:3015
msgid "Password: "
msgstr "密碼："

#: src/options.c:3036
msgid "Cannot create pipe"
msgstr "無法建立管線"

#: src/options.c:3042
#, c-format
msgid "Error initializing spawn file actions for use-askpass: %d"
msgstr "初始化 use-askpass 的 spawn 檔案動作時發生錯誤：%d"

#: src/options.c:3053
#, c-format
msgid "Error setting spawn file actions for use-askpass: %d"
msgstr "設定 use-askpass 的 spawn 檔案動作時發生錯誤：%d"

#: src/options.c:3060
#, c-format
msgid "Error spawning %s: %d"
msgstr "spawn %s 時發生錯誤：%d"

#: src/options.c:3077
#, c-format
msgid "Error reading response from command \"%s %s\": %s\n"
msgstr "讀取命令「%s %s」的回應時發生錯誤：%s\n"

#: src/options.c:3159
#, c-format
msgid "Failed to open %s"
msgstr "無法開啟 %s"

#: src/options.c:3197
#, c-format
msgid "~/.wget2rc is deprecated. Please move it to %s/wget2rc\n"
msgstr "~/.wget2rc 已棄用，請將它移至 %s/wget2rc\n"

#: src/options.c:3533
#, c-format
msgid "Failed to set http proxies %s\n"
msgstr "無法設定 http 代理伺服器 %s\n"

#: src/options.c:3537
#, c-format
msgid "Failed to set https proxies %s\n"
msgstr "無法設定 https 代理伺服器 %s\n"

#: src/options.c:3541
#, c-format
msgid "Failed to set proxy exceptions %s\n"
msgstr "無法設定代理伺服器例外 %s\n"

#: src/options.c:3567
#, c-format
msgid "Failed to load %s (%d)"
msgstr "無法載入 %s (%d)"

#: src/options.c:3627
msgid "Specifying both --start-pos and --continue is not recommended; --continue will be disabled"
msgstr "不建議同時指定 --start-pos 與 --continue；將停用 --continue"

#: src/options.c:3633
msgid "WARNING: timestamping does nothing in combination with -O"
msgstr "警告：時間戳記與 -O 併用時不會有任何作用"

#: src/options.c:3637
msgid "Can't timestamp and not clobber old files at the same time"
msgstr "無法同時使用時間戳記且不覆寫舊檔案"

#: src/options.c:3641
msgid "WARNING: timestamping does nothing in combination with spider"
msgstr "警告：時間戳記與 spider 併用時不會有任何作用"

#: src/options.c:3645
msgid "WARNING: timestamping and chunk-size only work together without If-Modified-Since"
msgstr "警告：只有在未使用 If-Modified-Since 時，時間戳記與 chunk-size 才能一起運作"

#: src/options.c:3684
#, c-format
msgid "Failed to init networking (%d)"
msgstr "無法初始化網路功能 (%d)"

#: src/options.c:3689
#, c-format
msgid "Failed to init DNS (%d)"
msgstr "無法初始化 DNS (%d)"

#: src/options.c:3707 src/options.c:3718 src/options.c:3729 src/options.c:3740
#: src/options.c:3751
#, c-format
msgid "Failed to open '%s' (%d)"
msgstr "無法開啟「%s」(%d)"

#: src/options.c:4004
#, c-format
msgid "%s: Option not in order '%s' after '%s' (using opt_compare())\n"
msgstr "%s：選項「%s」未依「%s」之後的順序排列（使用 opt_compare()）\n"

#: src/options.c:4013
#, c-format
msgid "%s: Option not in order '%s' after '%s' (using opt_compare_config())\n"
msgstr "%s：選項「%s」未依「%s」之後的順序排列（使用 opt_compare_config()）\n"

#: src/options.c:4023
#, c-format
msgid "%s: Failed to find option '%s' (using opt_compare())\n"
msgstr "%s：找不到選項「%s」（使用 opt_compare()）\n"

#: src/options.c:4033 src/options.c:4057
#, c-format
msgid "%s: Failed to find option '%s' (using opt_compare_config())\n"
msgstr "%s：找不到選項「%s」（使用 opt_compare_config()）\n"

#: src/options.c:4082
#, c-format
msgid "%s: Failed to parse bool short option #%zu (=%d)\n"
msgstr "%s：無法解析布林短選項 #%zu (=%d)\n"

#: src/options.c:4108 src/options.c:4114
#, c-format
msgid "%s: Failed to parse bool long option #%zu (%d)\n"
msgstr "%s：無法解析布林長選項 #%zu (%d)\n"

#: src/options.c:4157
#, c-format
msgid "%s: Failed to parse timeout short option #%zu (=%d)\n"
msgstr "%s：無法解析逾時短選項 #%zu (=%d)\n"

#: src/options.c:4188
#, c-format
msgid "%s: Failed to parse timeout long option #%zu (%d)\n"
msgstr "%s：無法解析逾時長選項 #%zu (%d)\n"

#: src/options.c:4223
#, c-format
msgid "%s: Extra headers found in option #%zu\n"
msgstr "%s：選項 #%zu 中有多餘的標頭\n"

#: src/options.c:4228
#, c-format
msgid "%s: Failed to parse header option #%zu\n"
msgstr "%s：無法解析標頭選項 #%zu\n"

#: src/options.c:4251
#, c-format
msgid "%s: Accepted illegal header option #%zu\n"
msgstr "%s：接受了非法的標頭選項 #%zu\n"

#: src/options.c:4279 src/options.c:4298
#, c-format
msgid "%s: Failed to parse string short option #%zu (=%s)\n"
msgstr "%s：無法解析字串短選項 #%zu (=%s)\n"

#: src/plugin.c:398
#, c-format
msgid "Plugin '%s' failed to load: %s"
msgstr "外掛「%s」載入失敗：%s"

#: src/plugin.c:506
#, c-format
msgid "Options for %s:\n"
msgstr "%s 的選項：\n"

#: src/utils.c:50
#, c-format
msgid "Internal error: Unexpected relative path: '%s'\n"
msgstr "內部錯誤：非預期的相對路徑：「%s」\n"

#: src/utils.c:83 src/utils.c:90
#, c-format
msgid "Failed to make directory '%s' (errno=%d)\n"
msgstr "無法建立目錄「%s」(errno=%d)\n"

#: src/utils.c:88
#, c-format
msgid "Failed to rename '%s' (errno=%d)\n"
msgstr "無法重新命名「%s」(errno=%d)\n"

#: src/wget.c:631
#, c-format
msgid "HSTS in effect for [%s]:%hu\n"
msgstr "[%s]:%hu 已套用 HSTS\n"

#: src/wget.c:633
#, c-format
msgid "HSTS in effect for %s:%hu\n"
msgstr "%s:%hu 已套用 HSTS\n"

#: src/wget.c:696
#, c-format
msgid "Failed to parse URI '%s'\n"
msgstr "無法解析 URI「%s」\n"

#: src/wget.c:714
#, c-format
msgid "URI scheme not supported: '%s'\n"
msgstr "不支援的 URI 架構：「%s」\n"

#: src/wget.c:852
msgid "Cannot resolve URI\n"
msgstr "無法解析 URI\n"

#: src/wget.c:858
#, c-format
msgid "URL '%s' not followed (max redirections exceeded)\n"
msgstr "未跟隨 URL「%s」（超過最大重新導向次數）\n"

#: src/wget.c:868
#, c-format
msgid "URL '%s' no followed (plugin verdict)\n"
msgstr "未跟隨 URL「%s」（外掛判定）\n"

#: src/wget.c:882
#, c-format
msgid "URL '%s' not followed (unsupported scheme)\n"
msgstr "未跟隨 URL「%s」（不支援的架構）\n"

#: src/wget.c:892
#, c-format
msgid "URL '%s' not followed (https-only requested)\n"
msgstr "未跟隨 URL「%s」（要求僅使用 https）\n"

#: src/wget.c:909
msgid "missing ip/host/domain"
msgstr "缺少 IP／主機／網域"

#: src/wget.c:912
msgid "no host-spanning requested"
msgstr "未要求跨主機"

#: src/wget.c:914
msgid "domain explicitly excluded"
msgstr "已明確排除該網域"

#: src/wget.c:918
#, c-format
msgid "URL '%s' not followed (%s)\n"
msgstr "未跟隨 URL「%s」(%s)\n"

#: src/wget.c:952
#, c-format
msgid "URL '%s' not followed (parent ascending not allowed)\n"
msgstr "未跟隨 URL「%s」（不允許上層目錄）\n"

#: src/wget.c:970 src/wget.c:985
#, c-format
msgid "URL '%s' not followed (file already exists)\n"
msgstr "未跟隨 URL「%s」（檔案已存在）\n"

#: src/wget.c:1005
#, c-format
msgid "Failed to get '%s' from hosts\n"
msgstr "無法從主機清單取得「%s」\n"

#: src/wget.c:1013
#, c-format
msgid "URL '%s' not followed (doesn't match accept pattern)\n"
msgstr "未跟隨 URL「%s」（不符合 accept 樣態）\n"

#: src/wget.c:1020
#, c-format
msgid "URL '%s' not followed (matches reject pattern)\n"
msgstr "未跟隨 URL「%s」（符合 reject 樣態）\n"

#: src/wget.c:1025
#, c-format
msgid "URL '%s' not followed (path excluded)\n"
msgstr "未跟隨 URL「%s」（已排除該路徑）\n"

#: src/wget.c:1030
#, c-format
msgid "Enqueue %s\n"
msgstr "將 %s 加入佇列\n"

#: src/wget.c:1191
#, c-format
msgid "convert %s %s %s\n"
msgstr "convert %s %s %s\n"

#: src/wget.c:1194
#, c-format
msgid "%s not found (%d)\n"
msgstr "找不到 %s (%d)\n"

#: src/wget.c:1229
#, c-format
msgid "Cannot resolve URI '%s'\n"
msgstr "無法解析 URI「%s」\n"

#: src/wget.c:1259
#, c-format
msgid "Failed to rename %s to %s (%d)"
msgstr "無法將 %s 重新命名為 %s (%d)"

#: src/wget.c:1265
#, c-format
msgid "Failed to write open %s (%d)"
msgstr "無法寫入已開啟的 %s (%d)"

#: src/wget.c:1404 src/wget.c:1495
#, c-format
msgid "Failed to start downloader, error %d\n"
msgstr "無法啟動下載程式，錯誤 %d\n"

#: src/wget.c:1427
#, c-format
msgid "Failed to open input file %s\n"
msgstr "無法開啟輸入檔案 %s\n"

#: src/wget.c:1432
msgid "Nothing to do - goodbye\n"
msgstr "無事可做，告別\n"

#: src/wget.c:1450
msgid "Wget2 built without thread support. Disabling progress report\n"
msgstr "Wget2 建置時未提供執行緒支援，已停用進度報告\n"

#: src/wget.c:1468
#, c-format
msgid "Failed to start progress report thread, error %d\n"
msgstr "無法啟動進度報告執行緒，錯誤 %d\n"

#: src/wget.c:1502
#, c-format
msgid "Quota of %lld bytes reached - stopping.\n"
msgstr "已達到 %lld 位元組的配額，中止。\n"

#: src/wget.c:1522
#, c-format
msgid "Failed to wait for downloader #%d (%d %d)\n"
msgstr "無法等待下載程式 #%d (%d %d)\n"

#: src/wget.c:1529
#, c-format
msgid "Downloaded: %d files, %s bytes, %d redirects, %d errors\n"
msgstr "已下載：%d 個檔案、%s 位元組、%d 次重新導向、%d 個錯誤\n"

#: src/wget.c:1555
msgid "--convert-links and --convert-file-only cannot be used together, error\n"
msgstr "--convert-links 與 --convert-file-only 不能一起使用，錯誤\n"

#: src/wget.c:1570
#, c-format
msgid "Failed to wait for progress thread (%d %d)\n"
msgstr "無法等待進度執行緒 (%d %d)\n"

#: src/wget.c:1667
#, c-format
msgid "Failed to connect: %s\n"
msgstr "無法連線：%s\n"

#: src/wget.c:1895
msgid "The file is already fully retrieved; nothing to do.\n"
msgstr "檔案已完整取得，無事可做。\n"

#: src/wget.c:1961
#, c-format
msgid "File '%s' not modified on server. Omitting download"
msgstr "伺服器上的檔案「%s」並未修改，略過下載"

#: src/wget.c:1998
#, c-format
msgid "Not scanning '%s' (known ETag)\n"
msgstr "不掃描「%s」（已知 ETag）\n"

#: src/wget.c:2045
#, c-format
msgid "The sizes do not match (local %lld, remote %zu) -- retrieving"
msgstr "大小不相符（本地 %lld、遠端 %zu）-- 重新取得"

#: src/wget.c:2213
#, c-format
msgid "File length %llu - remove job\n"
msgstr "檔案長度 %llu - 移除工作\n"

#: src/wget.c:2215
msgid "No download mirrors found - remove job\n"
msgstr "找不到下載鏡像 - 移除工作\n"

#: src/wget.c:2217
msgid "Metalink file name is invalid, missing or empty - remove job\n"
msgstr "Metalink 檔案名稱無效、缺少或為空 - 移除工作\n"

#: src/wget.c:2225
msgid "Metalink validation failed: max tries reached - remove job\n"
msgstr "Metalink 驗證失敗：已達最大重試次數 - 移除工作\n"

#: src/wget.c:2338
msgid "Couldn't determine base file to delete for failed verification\n"
msgstr "無法判定因驗證失敗而需刪除的基礎檔案\n"

#: src/wget.c:2342
#, c-format
msgid "Signature for file %s successfully verified\n"
msgstr "檔案 %s 的簽章已成功驗證\n"

#: src/wget.c:2358
msgid "Should not have remaining extensions!\n"
msgstr "不應還有殘留的副檔名！\n"

#: src/wget.c:2372
msgid "File name for signature checking not assigned to job!\n"
msgstr "未將要檢查簽章的檔案名稱指派給工作！\n"

#: src/wget.c:2374
msgid "Cannot check the signature on a signature!\n"
msgstr "無法對簽章檢查簽章！\n"

#: src/wget.c:2603
#, c-format
msgid "Unhandled action %d\n"
msgstr "未處理的動作 %d\n"

#: src/wget.c:2715
#, c-format
msgid "URL '%.*s' not followed (conversion failed)\n"
msgstr "未跟隨 URL「%.*s」（轉換失敗）\n"

#: src/wget.c:2723
#, c-format
msgid "Cannot resolve relative URI %.*s\n"
msgstr "無法解析相對 URI %.*s\n"

#: src/wget.c:2745
msgid "set by user"
msgstr "由使用者設定"

#: src/wget.c:2750 src/wget.c:2758 src/wget.c:2766
msgid "set by BOM"
msgstr "由 BOM 設定"

#: src/wget.c:2772
msgid "set by server response"
msgstr "由伺服器回應設定"

#: src/wget.c:2781
#, c-format
msgid "Convert non-ASCII encoding '%s' (%s) to UTF-8\n"
msgstr "將非 ASCII 編碼「%s」(%s) 轉換為 UTF-8\n"

#: src/wget.c:2785
#, c-format
msgid "Link conversion disabled for '%s'\n"
msgstr "已停用「%s」的連結轉換\n"

#: src/wget.c:2788
#, c-format
msgid "Filename conversion disabled for '%s'\n"
msgstr "已停用「%s」的檔名轉換\n"

#: src/wget.c:2792
#, c-format
msgid "Failed to convert non-ASCII encoding '%s' (%s) to UTF-8, skip parsing\n"
msgstr "無法將非 ASCII 編碼「%s」(%s) 轉換為 UTF-8，略過解析\n"

#: src/wget.c:2805
msgid "set by document"
msgstr "由文件設定"

#: src/wget.c:2808
msgid "default, encoding not specified"
msgstr "預設，未指定編碼"

#: src/wget.c:2812
#, c-format
msgid "URI content encoding = '%s' (%s)\n"
msgstr "URI 內容編碼=「%s」(%s)\n"

#: src/wget.c:2820
#, c-format
msgid "BASE '%.*s' not usable (missing absolute base URI)\n"
msgstr "無法使用 BASE「%.*s」（缺少絕對的基底 URI）\n"

#: src/wget.c:2827
#, c-format
msgid "Cannot resolve BASE URI %.*s\n"
msgstr "無法解析 BASE URI %.*s\n"

#: src/wget.c:2837
#, c-format
msgid "URL '%.*s' not followed (action/formaction attribute)\n"
msgstr "未跟隨 URL「%.*s」（action/formaction 屬性）\n"

#: src/wget.c:2851
#, c-format
msgid "URL '%.*s' not followed (page requisites + level)\n"
msgstr "未跟隨 URL「%.*s」（頁面必要資源與層級）\n"

#: src/wget.c:2862 src/wget.c:3072 src/wget.c:3210
#, c-format
msgid "URL '%.*s' not followed (missing base URI)\n"
msgstr "未跟隨 URL「%.*s」（缺少基底 URI）\n"

#: src/wget.c:2929 src/wget.c:3062
#, c-format
msgid "found %d url(s) (base=%s)\n"
msgstr "找到 %d 個 URL (base=%s)\n"

#: src/wget.c:2936 src/wget.c:3040
#, c-format
msgid "URL '%.*s' not followed (not matching sitemap location)\n"
msgstr "未跟隨 URL「%.*s」（不符合網站地圖位置）\n"

#: src/wget.c:2947 src/wget.c:2968 src/wget.c:3083
#, c-format
msgid "URL '%.*s' not followed (already known)\n"
msgstr "未跟隨 URL「%.*s」（已知）\n"

#: src/wget.c:2955
#, c-format
msgid "found %d sitemap url(s) (base=%s)\n"
msgstr "找到 %d 個網站地圖 URL (base=%s)\n"

#: src/wget.c:3000
#, c-format
msgid "Can't scan '%s' because no libz support enabled at compile time\n"
msgstr "無法掃描「%s」，因為編譯時未啟用 libz 支援\n"

#: src/wget.c:3141
#, c-format
msgid "Invalid file length %llu\n"
msgstr "無效的檔案長度 %llu\n"

#: src/wget.c:3144
msgid "No download mirrors found\n"
msgstr "找不到下載鏡像\n"

#: src/wget.c:3147
msgid "Metalink file name is missing or empty\n"
msgstr "Metalink 檔案名稱缺少或為空\n"

#: src/wget.c:3196 src/wget.c:3224 src/wget.c:3243
#, c-format
msgid "URI content encoding = '%s'\n"
msgstr "URI 內容編碼=「%s」\n"

#: src/wget.c:3316
#, c-format
msgid "Failed to set file date (%d)\n"
msgstr "無法設定檔案日期 (%d)\n"

#: src/wget.c:3463
#, c-format
msgid "Failed to write to STDOUT (%td, errno=%d)\n"
msgstr "無法寫入 STDOUT (%td, errno=%d)\n"

#: src/wget.c:3563
#, c-format
msgid "Failed to rename %s to %s (errno=%d)\n"
msgstr "無法將 %s 重新命名為 %s (errno=%d)\n"

#: src/wget.c:3589 src/wget.c:3595
#, c-format
msgid "Failed to load partial content from '%s' (errno=%d)\n"
msgstr "無法從「%s」載入部分內容 (errno=%d)\n"

#: src/wget.c:3604
#, c-format
msgid "Failed to unlink '%s' (errno=%d)\n"
msgstr "無法取消連結「%s」(errno=%d)\n"

#: src/wget.c:3624
#, c-format
msgid "Saving ']8;;file://%s%s\\%s]8;;\\'\n"
msgstr "正在儲存「]8;;file://%s%s\\%s]8;;\\」\n"

#: src/wget.c:3628
#, c-format
msgid "Saving '%s'\n"
msgstr "正在儲存「%s」\n"

#: src/wget.c:3634
#, c-format
msgid "Failed to write file %s (%zd, errno=%d)\n"
msgstr "無法寫入檔案 %s (%zd, errno=%d)\n"

#: src/wget.c:3643
#, c-format
msgid "File '%s' already there; not retrieving.\n"
msgstr "檔案「%s」已存在，不再取得。\n"

#: src/wget.c:3649
#, c-format
msgid "Directory / file name clash - not saving '%s'\n"
msgstr "目錄與檔案名稱衝突 - 不儲存「%s」\n"

#: src/wget.c:3651
#, c-format
msgid "Failed to open '%s' (%d)\n"
msgstr "無法開啟「%s」(%d)\n"

#: src/wget.c:3663
#, c-format
msgid "Failed to save extended attribute %s\n"
msgstr "無法儲存擴充屬性 %s\n"

#: src/wget.c:3854
#, c-format
msgid ""
"# got header %zu bytes:\n"
"%s\n"
msgstr ""
"# 取得 %zu 位元組的標頭：\n"
"%s\n"

#: src/wget.c:3928
#, c-format
msgid "Failed to open .netrc file '%s' (%d): %s\n"
msgstr "無法開啟 .netrc 檔案「%s」(%d)：%s\n"

#: src/wget.c:4277
#, c-format
msgid "Failed to fsync errno=%d\n"
msgstr "無法 fsync，errno=%d\n"

#: src/wget.c:4586
#, c-format
msgid "Continuing in background, pid %lu.\n"
msgstr "在背景繼續執行，pid %lu。\n"

#: src/wget.c:4588 src/wget.c:4669
#, c-format
msgid "Output will be written to %s.\n"
msgstr "輸出將寫入 %s。\n"

#: src/wget.c:4614
msgid "fake_fork_child() failed\n"
msgstr "fake_fork_child() 失敗\n"

#: src/wget.c:4622
msgid "fake_fork() failed\n"
msgstr "fake_fork() 失敗\n"

#: src/wget.c:4663
#, c-format
msgid "Failed to fork (%d)\n"
msgstr "無法 fork (%d)\n"

#: src/wget.c:4667
#, c-format
msgid "Continuing in background, pid %d.\n"
msgstr "在背景繼續執行，pid %d。\n"

#: src/wget.c:4677
msgid "Failed to redirect stdin to /dev/null.\n"
msgstr "無法將 stdin 重新導向 /dev/null。\n"

#: src/wget.c:4679
msgid "Failed to redirect stdout to /dev/null.\n"
msgstr "無法將 stdout 重新導向 /dev/null。\n"

#: src/wget.c:4681
msgid "Failed to redirect stderr to /dev/null.\n"
msgstr "無法將 stderr 重新導向 /dev/null。\n"