# grub 软件包的简体中文翻译。 # Copyright (C) 2009, 2010, 2011 Free Software Foundation, Inc. # This file is distributed under the same license as the grub package. # Zhengyu Ji , 2009. # Xin Ye , 2009. # Eleanor Chen , 2010. # Aron Xu , 2009, 2010, 2011. # Boyuan Yang <073plan@gmail.com>, 2018, 2019, 2021, 2022. # wwj402 , 2018. # msgid "" msgstr "" "Project-Id-Version: grub 2.12-rc1\n" "Report-Msgid-Bugs-To: bug-grub@gnu.org\n" "POT-Creation-Date: 2023-07-10 17:58+0200\n" "PO-Revision-Date: 2023-07-11 14:44+0800\n" "Last-Translator: Wenbin Lv \n" "Language-Team: Chinese (simplified) \n" "Language: zh_CN\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Bugs: Report translation errors to the Language-Team address.\n" "X-Generator: Poedit 3.3.2\n" #: grub-core/bus/usb/serial/ftdi.c:145 grub-core/bus/usb/serial/pl2303.c:158 #: grub-core/term/ieee1275/escc.c:169 grub-core/term/ns8250.c:262 msgid "unsupported serial port speed" msgstr "不支持的串行端口速度" #: grub-core/bus/usb/serial/ftdi.c:151 grub-core/bus/usb/serial/pl2303.c:164 #: grub-core/term/efi/serial.c:116 grub-core/term/ieee1275/escc.c:175 #: grub-core/term/ns8250.c:268 grub-core/term/serial.c:285 #: grub-core/term/serial.c:301 msgid "unsupported serial port parity" msgstr "不支持的串行端口奇偶校验" #: grub-core/bus/usb/serial/ftdi.c:157 grub-core/bus/usb/serial/pl2303.c:170 #: grub-core/term/efi/serial.c:122 grub-core/term/ieee1275/escc.c:181 #: grub-core/term/ns8250.c:273 grub-core/term/serial.c:325 msgid "unsupported serial port stop bits number" msgstr "不支持的串行端口停止位" #: grub-core/bus/usb/serial/ftdi.c:161 grub-core/bus/usb/serial/pl2303.c:174 #: grub-core/term/efi/serial.c:126 grub-core/term/ieee1275/escc.c:185 #: grub-core/term/ns8250.c:277 msgid "unsupported serial port word length" msgstr "不支持的串行端口字长" #: grub-core/commands/acpi.c:43 msgid "Don't load host tables specified by comma-separated list." msgstr "不加载指定的主机表（多个表用逗号分隔）。" #: grub-core/commands/acpi.c:46 msgid "Load only tables specified by comma-separated list." msgstr "只加载指定的主机表（多个表用逗号分隔）。" #: grub-core/commands/acpi.c:47 msgid "Export version 1 tables to the OS." msgstr "导出版本 1 表至操作系统。" #: grub-core/commands/acpi.c:48 msgid "Export version 2 and version 3 tables to the OS." msgstr "导出版本 2 和版本 3 表至操作系统。" #: grub-core/commands/acpi.c:49 msgid "Set OEMID of RSDP, XSDT and RSDT." msgstr "设置 RSDP，XSDT 和 RSDT 中的 OEMID。" #: grub-core/commands/acpi.c:51 msgid "Set OEMTABLE ID of RSDP, XSDT and RSDT." msgstr "设置 RSDP，XSDT 和 RSDT 中的 OEMTABLE ID。" #: grub-core/commands/acpi.c:53 msgid "Set OEMTABLE revision of RSDP, XSDT and RSDT." msgstr "设置 RSDP，XSDT 和 RSDT 中的 OEMTABLE 版本信息。" #: grub-core/commands/acpi.c:55 msgid "Set creator field of RSDP, XSDT and RSDT." msgstr "设置 RSDP，XSDT 和 RSDT 中的制造商信息。" #: grub-core/commands/acpi.c:57 msgid "Set creator revision of RSDP, XSDT and RSDT." msgstr "设置 RSDP，XSDT 和 RSDT 中的制造商版本信息。" #. TRANSLATORS: "hangs" here is a noun, not a verb. #: grub-core/commands/acpi.c:59 msgid "Don't update EBDA. May fix failures or hangs on some BIOSes but makes it ineffective with OS not receiving RSDP from GRUB." msgstr "不更新 EBDA。有些时候能解决某些 BIOS 上引导失败和挂起的问题。但对不从 GRUB 接收 RSDP 的操作系统无效。" #: grub-core/commands/acpi.c:655 grub-core/commands/acpi.c:672 #: grub-core/commands/i386/pc/play.c:105 grub-core/commands/keylayouts.c:230 #: grub-core/commands/keylayouts.c:245 grub-core/commands/keylayouts.c:263 #: grub-core/efiemu/loadcore.c:350 grub-core/kern/elf.c:117 #: grub-core/kern/elfXX.c:29 grub-core/kern/elfXX.c:156 #: grub-core/kern/verifiers.c:156 grub-core/loader/arm/linux.c:320 #: grub-core/loader/arm64/xen_boot.c:342 #: grub-core/loader/efi/chainloader.c:283 #: grub-core/loader/efi/chainloader.c:304 #: grub-core/loader/efi/chainloader.c:336 grub-core/loader/efi/fdt.c:145 #: grub-core/loader/efi/linux.c:527 grub-core/loader/i386/bsd.c:1282 #: grub-core/loader/i386/bsd.c:2123 grub-core/loader/i386/bsdXX.c:20 #: grub-core/loader/i386/bsdXX.c:39 grub-core/loader/i386/bsdXX.c:70 #: grub-core/loader/i386/bsdXX.c:375 grub-core/loader/i386/bsdXX.c:394 #: grub-core/loader/i386/bsdXX.c:541 grub-core/loader/i386/bsdXX.c:557 #: grub-core/loader/i386/bsdXX.c:643 grub-core/loader/i386/bsdXX.c:666 #: grub-core/loader/i386/coreboot/chainloader.c:112 #: grub-core/loader/i386/coreboot/chainloader.c:148 #: grub-core/loader/i386/coreboot/chainloader.c:170 #: grub-core/loader/i386/linux.c:675 grub-core/loader/i386/linux.c:791 #: grub-core/loader/i386/linux.c:1011 #: grub-core/loader/i386/multiboot_mbi.c:171 #: grub-core/loader/i386/pc/chainloader.c:202 #: grub-core/loader/i386/pc/linux.c:150 grub-core/loader/i386/pc/linux.c:326 #: grub-core/loader/i386/pc/linux.c:368 grub-core/loader/i386/pc/plan9.c:457 #: grub-core/loader/i386/pc/plan9.c:550 grub-core/loader/i386/pc/plan9.c:566 #: grub-core/loader/i386/xen.c:941 grub-core/loader/i386/xen_file.c:72 #: grub-core/loader/i386/xen_fileXX.c:43 #: grub-core/loader/i386/xen_fileXX.c:186 #: grub-core/loader/i386/xen_fileXX.c:339 #: grub-core/loader/ia64/efi/linux.c:423 grub-core/loader/ia64/efi/linux.c:471 #: grub-core/loader/linux.c:332 grub-core/loader/macho.c:84 #: grub-core/loader/macho.c:109 grub-core/loader/machoXX.c:33 #: grub-core/loader/machoXX.c:46 grub-core/loader/machoXX.c:76 #: grub-core/loader/machoXX.c:116 grub-core/loader/machoXX.c:131 #: grub-core/loader/machoXX.c:147 grub-core/loader/machoXX.c:196 #: grub-core/loader/machoXX.c:317 grub-core/loader/multiboot.c:434 #: grub-core/loader/multiboot_elfxx.c:198 #: grub-core/loader/multiboot_elfxx.c:267 #: grub-core/loader/multiboot_elfxx.c:315 #: grub-core/loader/multiboot_mbi2.c:135 grub-core/loader/xnu.c:756 #: grub-core/loader/xnu.c:814 grub-core/loader/xnu.c:835 #: grub-core/loader/xnu.c:890 grub-core/loader/xnu.c:933 #: grub-core/loader/xnu.c:971 grub-core/loader/xnu_resume.c:68 #: grub-core/loader/xnu_resume.c:153 grub-core/loader/xnu_resume.c:165 #: util/grub-mkimagexx.c:2417 #, c-format msgid "premature end of file %s" msgstr "文件 %s 过早结束" #: grub-core/commands/acpi.c:784 msgid "[-1|-2] [--exclude=TABLE1,TABLE2|--load-only=TABLE1,TABLE2] FILE1 [FILE2] [...]" msgstr "[-1|-2] [--exclude=表1,表2|--load-only=表1,表2] 文件1 [文件2] [...]" #: grub-core/commands/acpi.c:787 msgid "Load host ACPI tables and tables specified by arguments." msgstr "加载 ACPI 主机表和参数指定的表。" #: grub-core/commands/acpihalt.c:368 grub-core/kern/err.c:110 #: grub-core/kern/fs.c:79 #, c-format msgid "error: %s.\n" msgstr "错误：%s。\n" #: grub-core/commands/acpihalt.c:368 grub-core/kern/efi/mm.c:143 #: grub-core/kern/efi/mm.c:156 grub-core/kern/emu/misc.c:96 #: grub-core/kern/emu/misc.c:108 grub-core/kern/emu/misc.c:118 #: grub-core/kern/emu/misc.c:147 grub-core/kern/emu/mm.c:34 #: grub-core/kern/emu/mm.c:44 grub-core/kern/emu/mm.c:73 #: grub-core/kern/mm.c:552 grub-core/lib/relocator.c:1286 #: grub-core/lib/relocator.c:1443 grub-core/lib/relocator.c:1542 #: grub-core/loader/arm/linux.c:260 grub-core/loader/arm64/xen_boot.c:330 #: grub-core/loader/arm64/xen_boot.c:353 #: grub-core/loader/efi/chainloader.c:296 grub-core/loader/efi/linux.c:408 #: grub-core/loader/efi/linux.c:430 grub-core/loader/efi/linux.c:518 #: grub-core/loader/efi/linux.c:537 grub-core/osdep/unix/dl.c:48 #: grub-core/osdep/windows/dl.c:46 grub-core/script/lexer.c:161 #: grub-core/script/lexer.c:197 msgid "out of memory" msgstr "内存耗尽" #: grub-core/commands/acpihalt.c:374 grub-core/disk/cryptodisk.c:806 #: grub-core/disk/cryptodisk.c:850 grub-core/kern/emu/hostdisk.c:307 #: grub-core/kern/emu/hostfs.c:149 grub-core/kern/emu/misc.c:216 #: grub-core/osdep/linux/ofpath.c:195 grub-core/osdep/linux/ofpath.c:521 #: grub-core/osdep/linux/ofpath.c:534 util/glue-efi.c:90 util/glue-efi.c:104 #: util/grub-editenv.c:161 util/grub-fstest.c:583 #: util/grub-install-common.c:1117 util/grub-mkrescue.c:658 #: util/grub-mkrescue.c:931 util/grub-mount.c:525 util/grub-render-label.c:176 #: util/misc.c:95 util/setup.c:817 util/setup.c:836 #, c-format msgid "cannot read `%s': %s" msgstr "无法读取 \"%s\"：%s" #. TRANSLATORS: It's computer shutdown using ACPI, not disabling ACPI. #: grub-core/commands/acpihalt.c:452 msgid "ACPI shutdown failed" msgstr "ACPI 关机失败" #: grub-core/commands/arc/lsdev.c:51 msgid "List devices." msgstr "列出设备。" #: grub-core/commands/bli.c:49 #, c-format msgid "cannot open device: %s" msgstr "无法打开设备：%s" #: grub-core/commands/bli.c:54 #, c-format msgid "cannot open disk: %s" msgstr "无法打开磁盘：%s" #: grub-core/commands/bli.c:62 #, c-format msgid "this is not a GPT partition table: %s" msgstr "这不是一个 GPT 分区表：%s" #: grub-core/commands/bli.c:69 #, c-format msgid "read error: %s" msgstr "读取错误：%s" #: grub-core/commands/bli.c:94 grub-core/commands/bli.c:98 msgid "unable to find boot device" msgstr "无法找到引导设备" #: grub-core/commands/bli.c:107 msgid "unable to determine partition UUID of boot device" msgstr "无法确定引导设备的分区 UUID" #: grub-core/commands/blocklist.c:124 grub-core/commands/cat.c:57 #: grub-core/commands/configfile.c:35 grub-core/commands/efi/loadbios.c:169 #: grub-core/commands/file.c:160 grub-core/commands/hexdump.c:47 #: grub-core/commands/legacycfg.c:228 grub-core/commands/legacycfg.c:334 #: grub-core/commands/minicmd.c:44 grub-core/commands/syslinuxcfg.c:146 #: grub-core/commands/testload.c:60 grub-core/commands/testspeed.c:52 #: grub-core/disk/loopback.c:98 grub-core/efiemu/main.c:293 #: grub-core/font/font_cmd.c:32 grub-core/kern/emu/hostdisk.c:519 #: grub-core/loader/arm/linux.c:365 grub-core/loader/arm/linux.c:410 #: grub-core/loader/arm/linux.c:473 grub-core/loader/arm64/xen_boot.c:384 #: grub-core/loader/arm64/xen_boot.c:397 grub-core/loader/arm64/xen_boot.c:448 #: grub-core/loader/efi/chainloader.c:232 grub-core/loader/efi/linux.c:377 #: grub-core/loader/efi/linux.c:480 grub-core/loader/emu/linux.c:119 #: grub-core/loader/emu/linux.c:152 grub-core/loader/i386/bsd.c:1468 #: grub-core/loader/i386/bsd.c:1813 grub-core/loader/i386/bsd.c:2091 #: grub-core/loader/i386/coreboot/chainloader.c:438 #: grub-core/loader/i386/linux.c:664 grub-core/loader/i386/linux.c:1047 #: grub-core/loader/i386/pc/chainloader.c:290 #: grub-core/loader/i386/pc/freedos.c:105 grub-core/loader/i386/pc/linux.c:139 #: grub-core/loader/i386/pc/linux.c:406 grub-core/loader/i386/pc/ntldr.c:85 #: grub-core/loader/i386/pc/plan9.c:409 #: grub-core/loader/i386/pc/pxechainloader.c:94 #: grub-core/loader/i386/pc/truecrypt.c:96 grub-core/loader/i386/xen.c:643 #: grub-core/loader/i386/xen.c:776 grub-core/loader/i386/xen.c:851 #: grub-core/loader/i386/xen.c:861 grub-core/loader/i386/xnu.c:487 #: grub-core/loader/ia64/efi/linux.c:459 grub-core/loader/ia64/efi/linux.c:539 #: grub-core/loader/mips/linux.c:238 grub-core/loader/mips/linux.c:429 #: grub-core/loader/multiboot.c:322 grub-core/loader/multiboot.c:374 #: grub-core/loader/multiboot.c:384 #: grub-core/loader/powerpc/ieee1275/linux.c:255 #: grub-core/loader/powerpc/ieee1275/linux.c:327 #: grub-core/loader/sparc64/ieee1275/linux.c:305 #: grub-core/loader/sparc64/ieee1275/linux.c:381 grub-core/loader/xnu.c:370 #: grub-core/loader/xnu.c:479 grub-core/loader/xnu.c:797 #: grub-core/loader/xnu.c:911 grub-core/loader/xnu.c:1296 #: grub-core/loader/xnu.c:1446 grub-core/loader/xnu.c:1472 #: grub-core/video/readers/jpeg.c:916 grub-core/video/readers/png.c:1118 msgid "filename expected" msgstr "需要文件名" #. TRANSLATORS: "embed" is a verb (command description). " #: grub-core/commands/blocklist.c:156 grub-core/commands/cat.c:163 #: grub-core/commands/configfile.c:65 grub-core/commands/configfile.c:68 #: grub-core/commands/configfile.c:74 grub-core/commands/configfile.c:80 #: grub-core/commands/configfile.c:86 grub-core/commands/hashsum.c:34 #: grub-core/commands/legacycfg.c:853 grub-core/commands/legacycfg.c:860 #: grub-core/commands/legacycfg.c:865 grub-core/commands/legacycfg.c:870 #: grub-core/commands/macbless.c:222 grub-core/commands/minicmd.c:201 #: grub-core/commands/syslinuxcfg.c:186 grub-core/commands/syslinuxcfg.c:194 #: grub-core/commands/syslinuxcfg.c:200 grub-core/commands/syslinuxcfg.c:206 #: grub-core/commands/testload.c:165 grub-core/efiemu/main.c:312 #: grub-core/kern/emu/main.c:100 grub-core/kern/emu/main.c:103 #: grub-core/loader/i386/bsd.c:2144 grub-core/loader/i386/bsd.c:2147 #: grub-core/loader/i386/bsd.c:2150 #: grub-core/loader/i386/coreboot/chainloader.c:505 #: grub-core/loader/ia64/efi/linux.c:594 include/grub/util/install.h:32 #: include/grub/util/install.h:64 include/grub/util/install.h:66 #: util/grub-glue-efi.c:52 util/grub-glue-efi.c:54 util/grub-glue-efi.c:56 #: util/grub-install.c:254 util/grub-install.c:301 util/grub-mkfont.c:982 #: util/grub-mkimage.c:68 util/grub-mkimage.c:74 util/grub-mkimage.c:76 #: util/grub-mkimage.c:78 util/grub-mkimage.c:81 util/grub-mkimage.c:84 #: util/grub-mklayout.c:52 util/grub-mklayout.c:54 util/grub-mkrescue.c:97 #: util/grub-mkrescue.c:101 util/grub-mkrescue.c:104 util/grub-mkrescue.c:105 #: util/grub-mkrescue.c:106 util/grub-mkstandalone.c:47 #: util/grub-mkstandalone.c:49 util/grub-probe.c:732 #: util/grub-render-label.c:59 util/grub-render-label.c:70 #: util/grub-render-label.c:72 util/grub-setup.c:78 util/grub-setup.c:80 #: util/grub-setup.c:84 util/grub-syslinux2cfg.c:74 #: util/grub-syslinux2cfg.c:147 util/grub-kbdcomp.in:29 #: util/grub-mkconfig.in:60 msgid "FILE" msgstr "文件" #: grub-core/commands/blocklist.c:156 msgid "Print a block list." msgstr "显示块列表。" #: grub-core/commands/boot.c:197 grub-core/commands/legacycfg.c:552 #: grub-core/commands/legacycfg.c:593 grub-core/loader/efi/linux.c:389 #: grub-core/loader/i386/bsd.c:1805 grub-core/loader/i386/bsd.c:1906 #: grub-core/loader/i386/bsd.c:2013 grub-core/loader/i386/bsd.c:2046 #: grub-core/loader/i386/bsd.c:2095 grub-core/loader/i386/linux.c:1053 #: grub-core/loader/i386/pc/linux.c:412 grub-core/loader/i386/xen.c:783 #: grub-core/loader/i386/xen.c:866 grub-core/loader/ia64/efi/linux.c:545 #: grub-core/loader/mips/linux.c:432 grub-core/loader/multiboot.c:388 #: grub-core/loader/powerpc/ieee1275/linux.c:333 #: grub-core/loader/sparc64/ieee1275/linux.c:387 grub-core/loader/xnu.c:591 #: grub-core/loader/xnu.c:687 grub-core/loader/xnu.c:800 #: grub-core/loader/xnu.c:914 grub-core/loader/xnu.c:1110 #: grub-core/loader/xnu.c:1277 grub-core/loader/xnu.c:1308 #: grub-core/loader/xnu.c:1449 msgid "you need to load the kernel first" msgstr "您需要先加载内核" #: grub-core/commands/boot.c:239 msgid "Boot an operating system." msgstr "引导操作系统。" #: grub-core/commands/boottime.c:36 #: grub-core/commands/i386/coreboot/cb_timestamps.c:108 msgid "No boot time statistics is available\n" msgstr "没有可用的引导时间统计信息\n" #: grub-core/commands/boottime.c:59 msgid "Show boot time statistics." msgstr "显示引导时间统计信息。" #: grub-core/commands/cacheinfo.c:40 #, c-format msgid "Disk cache statistics: hits = %lu (%lu.%02lu%%), misses = %lu\n" msgstr "磁盘缓存统计：命中 = %lu (%lu.%02lu%%)，缺失 = %lu\n" #: grub-core/commands/cacheinfo.c:45 msgid "No disk cache statistics available\n" msgstr "没有可用的磁盘缓存统计信息\n" #: grub-core/commands/cacheinfo.c:56 msgid "Get disk cache info." msgstr "获取磁盘缓存信息。" #: grub-core/commands/cat.c:33 msgid "Accept DOS-style CR/NL line endings." msgstr "接受 DOS 风格的 CR/NL 行结尾。" #: grub-core/commands/cat.c:163 grub-core/commands/minicmd.c:201 msgid "Show the contents of a file." msgstr "显示文件内容。" #: grub-core/commands/cmp.c:34 msgid "Enable verbose output" msgstr "启用详细输出" #: grub-core/commands/cmp.c:51 grub-core/commands/i386/pc/drivemap.c:236 #: grub-core/commands/i386/wrmsr.c:61 grub-core/commands/iorw.c:86 #: grub-core/commands/memrw.c:85 grub-core/commands/password.c:75 #: grub-core/commands/password_pbkdf2.c:94 grub-core/commands/pgp.c:826 #: grub-core/commands/regexp.c:113 grub-core/mmap/mmap.c:520 #: grub-core/net/dns.c:635 grub-core/net/net.c:1198 msgid "two arguments expected" msgstr "需要两个参数" #: grub-core/commands/cmp.c:54 #, c-format msgid "Compare file `%s' with `%s':\n" msgstr "比较文件 \"%s\" 和 \"%s\"：\n" #: grub-core/commands/cmp.c:62 #, c-format msgid "Files differ in size: %llu [%s], %llu [%s]\n" msgstr "文件大小的区别：%llu [%s], %llu [%s]\n" #: grub-core/commands/cmp.c:90 #, c-format msgid "Files differ at the offset %llu: 0x%x [%s], 0x%x [%s]\n" msgstr "文件在偏移量 %llu 的区别：0x%x [%s], 0x%x [%s]\n" #: grub-core/commands/cmp.c:103 msgid "The files are identical.\n" msgstr "文件完全相同。\n" #: grub-core/commands/cmp.c:124 msgid "FILE1 FILE2" msgstr "文件1 文件2" #: grub-core/commands/cmp.c:124 msgid "Compare two files." msgstr "比较两个文件。" #: grub-core/commands/configfile.c:65 msgid "Load another config file." msgstr "加载另一个配置文件。" #: grub-core/commands/configfile.c:69 grub-core/commands/configfile.c:87 msgid "Load another config file without changing context." msgstr "加载另一个配置文件（不改变环境）。" #: grub-core/commands/configfile.c:75 msgid "Load another config file without changing context but take only menu entries." msgstr "加载另一个配置文件（不改变环境，仅加载菜单项）。" #: grub-core/commands/configfile.c:81 msgid "Load another config file but take only menu entries." msgstr "加载另一个配置文件（仅加载菜单项）。" #: grub-core/commands/date.c:142 msgid "[[year-]month-day] [hour:minute[:second]]" msgstr "[[年-]月-日] [时:分[:秒]]" #: grub-core/commands/date.c:143 msgid "Display/set current datetime." msgstr "显示或设置当前日期与时间。" #: grub-core/commands/echo.c:30 msgid "Do not output the trailing newline." msgstr "末尾不输出换行符。" #: grub-core/commands/echo.c:31 msgid "Enable interpretation of backslash escapes." msgstr "启用对反斜杠转义序列的解释。" #: grub-core/commands/echo.c:134 msgid "[-e|-n] STRING" msgstr "[-e|-n] 字符串" #: grub-core/commands/echo.c:134 msgid "Display a line of text." msgstr "显示一行文本。" #: grub-core/commands/efi/efifwsetup.c:48 msgid "reboot to firmware setup is not supported by the current firmware" msgstr "当前固件不支持重新启动到固件设置" #: grub-core/commands/efi/efifwsetup.c:95 msgid "Reboot into firmware setup menu." msgstr "重新启动到固件设置菜单。" #: grub-core/commands/efi/efitextmode.c:44 msgid "device error: could not set requested mode" msgstr "设备错误：无法设置请求的模式" #: grub-core/commands/efi/efitextmode.c:47 msgid "invalid mode: number not valid" msgstr "无效的模式：数字无效" #: grub-core/commands/efi/efitextmode.c:50 #, c-format msgid "unexpected EFI error number: `%u'" msgstr "意外的 EFI 错误编号：\"%u\"" #: grub-core/commands/efi/efitextmode.c:69 msgid "no UEFI output console interface" msgstr "没有 UEFI 输出控制台界面" #: grub-core/commands/efi/efitextmode.c:72 msgid "no mode struct for UEFI output console" msgstr "没有 UEFI 输出控制台的模式结构体" #: grub-core/commands/efi/efitextmode.c:75 msgid "at most two arguments expected" msgstr "需要不超过两个参数" #: grub-core/commands/efi/efitextmode.c:79 msgid "Available modes for console output device.\n" msgstr "控制台输出设备的可用模式。\n" #: grub-core/commands/efi/efitextmode.c:83 msgid " [%" msgstr " [%" #: grub-core/commands/efi/efitextmode.c:100 #, c-format msgid "non-numeric or invalid mode `%s'" msgstr "模式 \"%s\" 不是数字或者无效" #: grub-core/commands/efi/efitextmode.c:111 #, c-format msgid "invalid mode: `%lu' is greater than maximum mode `%lu'" msgstr "无效的模式：\"%lu\" 大于模式的最大值 \"%lu\"" #: grub-core/commands/efi/efitextmode.c:122 #, c-format msgid "non-numeric or invalid columns number `%s'" msgstr "列号 \"%s\" 不是数字或者无效" #: grub-core/commands/efi/efitextmode.c:128 #, c-format msgid "non-numeric or invalid rows number `%s'" msgstr "行号 \"%s\" 不是数字或者无效" #: grub-core/commands/efi/efitextmode.c:136 msgid "no mode found with requested columns and rows" msgstr "未找到符合请求的列号和行号的模式" #: grub-core/commands/efi/efitextmode.c:146 msgid "[min | max | | ]" msgstr "[最小值 | 最大值 | <模式编号> | <列> <行>]" #: grub-core/commands/efi/efitextmode.c:147 msgid "Get or set EFI text mode." msgstr "获取或设置 EFI 文本模式。" #: grub-core/commands/efi/fixvideo.c:107 msgid "Fix video problem." msgstr "修正视频问题。" #: grub-core/commands/efi/loadbios.c:52 msgid "ROM image is present." msgstr "ROM 镜像存在。" #: grub-core/commands/efi/loadbios.c:70 msgid "Can't enable ROM area." msgstr "无法启用 ROM 区域。" #: grub-core/commands/efi/loadbios.c:210 msgid "Create BIOS-like structures for backward compatibility with existing OS." msgstr "创建类似 BIOS 的结构以与已有操作系统保持后向兼容性。" #: grub-core/commands/efi/loadbios.c:215 msgid "BIOS_DUMP [INT10_DUMP]" msgstr "BIOS转储 [INT10转储]" #: grub-core/commands/efi/loadbios.c:216 msgid "Load BIOS dump." msgstr "加载 BIOS 转储。" #: grub-core/commands/efi/tpm.c:141 msgid "command failed" msgstr "命令失败" #: grub-core/commands/efi/tpm.c:143 msgid "invalid parameter" msgstr "无效的参数" #: grub-core/commands/efi/tpm.c:145 msgid "output buffer too small" msgstr "输出缓冲区太小" #: grub-core/commands/efi/tpm.c:147 msgid "TPM unavailable" msgstr "TPM 不可用" #: grub-core/commands/efi/tpm.c:149 msgid "unknown TPM error" msgstr "未知的 TPM 错误" #: grub-core/commands/efi/tpm.c:174 grub-core/commands/efi/tpm.c:208 msgid "cannot allocate TPM event buffer" msgstr "无法分配 TPM 事件缓冲区" #: grub-core/commands/efi/tpm.c:249 msgid "cannot allocate CC event buffer" msgstr "无法分配 CC 事件缓冲区" #: grub-core/commands/eval.c:63 msgid "STRING ..." msgstr "字符串 ..." #: grub-core/commands/eval.c:64 msgid "Evaluate arguments as GRUB commands" msgstr "将参数作为 GRUB 命令进行求值" #: grub-core/commands/extcmd.c:120 grub-core/kern/command.c:88 #, c-format msgid "%s: the command is not allowed when lockdown is enforced" msgstr "%s: 处于锁闭模式时，不允许执行此命令" #: grub-core/commands/file.c:41 msgid "Check if FILE can be booted as i386 PAE Xen unprivileged guest kernel" msgstr "检查 <文件> 是否可以作为 i386 PAE Xen 无特权访客内核启动" #: grub-core/commands/file.c:44 msgid "Check if FILE can be booted as x86_64 Xen unprivileged guest kernel" msgstr "检查 <文件> 是否可以作为 x86_64 Xen 无特权访客内核启动" #: grub-core/commands/file.c:46 msgid "Check if FILE can be used as Xen x86 privileged guest kernel" msgstr "检查 <文件> 是否可被用作 Xen x86 特权访客内核" #: grub-core/commands/file.c:48 msgid "Check if FILE can be used as x86 multiboot kernel" msgstr "检查 <文件> 是否可被用作 x86 multiboot 内核" #: grub-core/commands/file.c:50 msgid "Check if FILE can be used as x86 multiboot2 kernel" msgstr "检查 <文件> 是否可被用作 x86 multiboot2 内核" #: grub-core/commands/file.c:52 msgid "Check if FILE is ARM Linux" msgstr "检查 <文件> 是否为 ARM Linux" #: grub-core/commands/file.c:54 msgid "Check if FILE is ARM64 Linux" msgstr "检查 <文件> 是否为 ARM64 Linux" #: grub-core/commands/file.c:56 msgid "Check if FILE is IA64 Linux" msgstr "检查 <文件> 是否为 IA64 Linux" #: grub-core/commands/file.c:58 msgid "Check if FILE is MIPS Linux" msgstr "检查 <文件> 是否为 MIPS Linux" #: grub-core/commands/file.c:60 msgid "Check if FILE is MIPSEL Linux" msgstr "检查 <文件> 是否为 MIPSEL Linux" #: grub-core/commands/file.c:62 msgid "Check if FILE is SPARC64 Linux" msgstr "检查 <文件> 是否为 SPARC64 Linux" #: grub-core/commands/file.c:64 msgid "Check if FILE is POWERPC Linux" msgstr "检查 <文件> 是否为 POWERPC Linux" #: grub-core/commands/file.c:66 msgid "Check if FILE is x86 Linux" msgstr "检查 <文件> 是否为 x86 Linux" #: grub-core/commands/file.c:68 msgid "Check if FILE is x86 Linux supporting 32-bit protocol" msgstr "检查 <文件> 是否为支持 32 位协议的 x86 Linux" #: grub-core/commands/file.c:70 msgid "Check if FILE is x86 kFreeBSD" msgstr "检查 <文件> 是否为 x86 kFreeBSD" #: grub-core/commands/file.c:72 msgid "Check if FILE is i386 kFreeBSD" msgstr "检查 <文件> 是否为 i386 kFreeBSD" #: grub-core/commands/file.c:74 msgid "Check if FILE is x86_64 kFreeBSD" msgstr "检查 <文件> 是否为 x86_64 kFreeBSD" #: grub-core/commands/file.c:77 msgid "Check if FILE is x86 kNetBSD" msgstr "检查 <文件> 是否为 x86 kNetBSD" #: grub-core/commands/file.c:79 msgid "Check if FILE is i386 kNetBSD" msgstr "检查 <文件> 是否为 i386 kNetBSD" #: grub-core/commands/file.c:81 msgid "Check if FILE is x86_64 kNetBSD" msgstr "检查 <文件> 是否为 x86_64 kNetBSD" #: grub-core/commands/file.c:84 msgid "Check if FILE is i386 EFI file" msgstr "检查 <文件> 是否为 i386 EFI 文件" #: grub-core/commands/file.c:86 msgid "Check if FILE is x86_64 EFI file" msgstr "检查 <文件> 是否为 x86_64 EFI 文件" #: grub-core/commands/file.c:88 msgid "Check if FILE is IA64 EFI file" msgstr "检查 <文件> 是否为 IA64 EFI 文件" #: grub-core/commands/file.c:90 msgid "Check if FILE is ARM64 EFI file" msgstr "检查 <文件> 是否为 ARM64 EFI 文件" #: grub-core/commands/file.c:92 msgid "Check if FILE is ARM EFI file" msgstr "检查 <文件> 是否为 ARM EFI 文件" #: grub-core/commands/file.c:94 msgid "Check if FILE is RISC-V 32bit EFI file" msgstr "检查 <文件> 是否为 RISC-V 32位 EFI 文件" #: grub-core/commands/file.c:96 msgid "Check if FILE is RISC-V 64bit EFI file" msgstr "检查 <文件> 是否为 RISC-V 64位 EFI 文件" #: grub-core/commands/file.c:98 msgid "Check if FILE is hiberfil.sys in hibernated state" msgstr "检查 <文件> 是否为处于休眠状态的 hiberfil.sys 文件" #: grub-core/commands/file.c:100 msgid "Check if FILE is x86_64 XNU (Mac OS X kernel)" msgstr "检查 <文件> 是否为 x86_64 XNU（Mac OS X 内核）" #: grub-core/commands/file.c:102 msgid "Check if FILE is i386 XNU (Mac OS X kernel)" msgstr "检查 <文件> 是否为 i386 XNU（Mac OS X 内核）" #: grub-core/commands/file.c:104 msgid "Check if FILE is XNU (Mac OS X kernel) hibernated image" msgstr "检查 <文件> 是否为 XNU（Mac OS X 内核）休眠镜像" #: grub-core/commands/file.c:106 msgid "Check if FILE is BIOS bootsector" msgstr "检查 <文件> 是否为 BIOS 引导扇区" #. TRANSLATORS: it's a standalone boolean value, #. opposite of "true". #: grub-core/commands/file.c:688 grub-core/commands/i386/cmostest.c:63 #: grub-core/commands/i386/cpuid.c:71 grub-core/commands/keystatus.c:65 #: grub-core/commands/keystatus.c:69 grub-core/commands/keystatus.c:78 #: grub-core/commands/test.c:436 grub-core/commands/true.c:39 #: grub-core/script/execute.c:247 grub-core/script/execute.c:1044 msgid "false" msgstr "假" #: grub-core/commands/file.c:697 msgid "OPTIONS FILE" msgstr "选项 文件" #: grub-core/commands/file.c:698 msgid "Check if FILE is of specified type." msgstr "检查 <文件> 是否为指定的类型。" #. TRANSLATORS: It means that the specified partition e.g. #. hd0,msdos1=/dev/sda1 doesn't exist. #: grub-core/commands/gptsync.c:140 grub-core/kern/disk.c:258 msgid "no such partition" msgstr "无此分区" #: grub-core/commands/gptsync.c:240 #, c-format msgid "New MBR is written to `%s'\n" msgstr "新 MBR 已写入 \"%s\"\n" #: grub-core/commands/gptsync.c:252 msgid "DEVICE [PARTITION[+/-[TYPE]]] ..." msgstr "设备 [分区[+/-[类型]]] ..." #. TRANSLATORS: MBR type is one-byte partition #. type id. #: grub-core/commands/gptsync.c:255 msgid "Fill hybrid MBR of GPT drive DEVICE. Specified partitions will be a part of hybrid MBR. Up to 3 partitions are allowed. TYPE is an MBR type. + means that partition is active. Only one partition can be active." msgstr "重写指定 GPT <设备> 的混合 MBR，指定的分区会成为混合 MBR 的一部分。最多允许指定 3 个分区。<类型> 是 MBR 类型。+ 表示该分区是活动分区。最多只能有一个活动分区。" #: grub-core/commands/halt.c:40 msgid "Halts the computer. This command does not work on all firmware implementations." msgstr "关闭计算机。对于某些固件实现，此命令无法正常工作。" #: grub-core/commands/hashsum.c:32 msgid "Specify hash to use." msgstr "指定要使用的哈希算法。" #: grub-core/commands/hashsum.c:32 msgid "HASH" msgstr "哈希算法" #: grub-core/commands/hashsum.c:33 msgid "Check hashes of files with hash list FILE." msgstr "使用给定的哈希列表 <文件> 检查文件的哈希值。" #: grub-core/commands/hashsum.c:35 msgid "Base directory for hash list." msgstr "哈希列表中的各文件所在目录。" #. TRANSLATORS: platform here isn't identifier. It can be translated. #: grub-core/commands/hashsum.c:35 grub-core/commands/ls.c:150 #: grub-core/commands/macbless.c:225 grub-core/commands/syslinuxcfg.c:51 #: grub-core/commands/syslinuxcfg.c:54 grub-core/kern/emu/main.c:106 #: include/grub/util/install.h:50 include/grub/util/install.h:53 #: include/grub/util/install.h:56 include/grub/util/install.h:59 #: util/grub-install.c:250 util/grub-install.c:252 util/grub-install.c:297 #: util/grub-install.c:299 util/grub-mkimage.c:64 util/grub-mkimage.c:67 #: util/grub-mknetdir.c:46 util/grub-mknetdir.c:48 util/grub-mkrescue.c:99 #: util/grub-setup.c:82 util/grub-syslinux2cfg.c:63 #: util/grub-syslinux2cfg.c:65 util/grub-syslinux2cfg.c:67 #: util/grub-syslinux2cfg.c:71 util/grub-reboot.in:54 #: util/grub-set-default.in:54 msgid "DIR" msgstr "目录" #: grub-core/commands/hashsum.c:37 msgid "Don't stop after first error." msgstr "第一次出现错误时不停止。" #: grub-core/commands/hashsum.c:38 msgid "Uncompress file before checksumming." msgstr "检查校验和前解压文件。" #: grub-core/commands/hashsum.c:172 #, c-format msgid "%s: READ ERROR\n" msgstr "%s: 读取出错\n" #: grub-core/commands/hashsum.c:186 #, c-format msgid "%s: HASH MISMATCH\n" msgstr "%s: 哈希不匹配\n" #: grub-core/commands/hashsum.c:197 #, c-format msgid "%s: OK\n" msgstr "%s: 正常\n" #: grub-core/commands/hashsum.c:291 msgid "-h HASH [-c FILE [-p PREFIX]] [FILE1 [FILE2 ...]]" msgstr "-h 哈希算法 [-c 文件 [-p 前缀]] [[文件1 [文件2 ...]]" #. TRANSLATORS: "hash checksum" is just to #. be a bit more precise, you can treat it as #. just "hash". #: grub-core/commands/hashsum.c:296 grub-core/commands/hashsum.c:301 #: grub-core/commands/hashsum.c:306 grub-core/commands/hashsum.c:311 #: grub-core/commands/hashsum.c:316 grub-core/commands/hashsum.c:322 msgid "Compute or check hash checksum." msgstr "计算或校验哈希校验和。" #: grub-core/commands/hashsum.c:299 grub-core/commands/hashsum.c:304 #: grub-core/commands/hashsum.c:309 grub-core/commands/hashsum.c:314 #: grub-core/commands/hashsum.c:320 msgid "[-c FILE [-p PREFIX]] [FILE1 [FILE2 ...]]" msgstr "[-c 文件 [-p 前缀]] [文件1 [文件2 ...]]" #: grub-core/commands/hdparm.c:33 msgid "" "Set Advanced Power Management\n" "(1=low, ..., 254=high, 255=off)." msgstr "" "设置高级电源管理\n" "（1=最低，...，254=最高，255=关闭）。" #: grub-core/commands/hdparm.c:36 msgid "Display power mode." msgstr "显示电源模式。" #: grub-core/commands/hdparm.c:37 msgid "Freeze ATA security settings until reset." msgstr "禁止更改 ATA 安全设置，直到下次重启。" #: grub-core/commands/hdparm.c:39 msgid "Display SMART health status." msgstr "显示 SMART 健康状态。" #: grub-core/commands/hdparm.c:40 msgid "" "Set Automatic Acoustic Management\n" "(0=off, 128=quiet, ..., 254=fast)." msgstr "" "设置自动声音管理\n" "（0=关闭，128=静音，...，254=高速）。" #: grub-core/commands/hdparm.c:43 msgid "" "Set standby timeout\n" "(0=off, 1=5s, 2=10s, ..., 240=20m, 241=30m, ...)." msgstr "" "设置待机超时时间\n" "（0=关闭，1=5秒，2=10秒，...，240=20分，241=30分，...）。" #: grub-core/commands/hdparm.c:46 msgid "Set drive to standby mode." msgstr "设置驱动器为待机模式。" #: grub-core/commands/hdparm.c:47 msgid "Set drive to sleep mode." msgstr "设置驱动器为睡眠模式。" #: grub-core/commands/hdparm.c:48 msgid "Print drive identity and settings." msgstr "显示硬盘识别信息和设置。" #: grub-core/commands/hdparm.c:50 msgid "Show raw contents of ATA IDENTIFY sector." msgstr "显示 ATA IDENTIFY 扇区原始内容。" #: grub-core/commands/hdparm.c:52 msgid "Disable/enable SMART (0/1)." msgstr "禁用/启用 SMART (0/1)。" #: grub-core/commands/hdparm.c:53 msgid "Do not print messages." msgstr "不显示消息。" #: grub-core/commands/hdparm.c:286 grub-core/commands/i386/rdmsr.c:68 #: grub-core/commands/iorw.c:48 grub-core/commands/legacycfg.c:779 #: grub-core/commands/legacycfg.c:831 grub-core/commands/macbless.c:190 #: grub-core/commands/memrw.c:48 grub-core/commands/pgp.c:738 #: grub-core/commands/pgp.c:792 grub-core/commands/search.c:324 #: grub-core/commands/search_wrap.c:182 grub-core/commands/setpci.c:242 #: grub-core/commands/sleep.c:71 grub-core/fs/zfs/zfsinfo.c:279 #: grub-core/fs/zfs/zfsinfo.c:358 grub-core/gettext/gettext.c:492 #: grub-core/kern/corecmd.c:68 grub-core/kern/corecmd.c:82 #: grub-core/mmap/mmap.c:433 grub-core/net/dns.c:711 grub-core/net/dns.c:743 #: grub-core/net/net.c:709 grub-core/net/net.c:1081 #: grub-core/normal/context.c:194 grub-core/script/execute.c:131 #: grub-core/term/gfxterm_background.c:136 msgid "one argument expected" msgstr "需要一个参数" #: grub-core/commands/hdparm.c:440 msgid "[OPTIONS] DISK" msgstr "[选项] 磁盘" #: grub-core/commands/hdparm.c:441 msgid "Get/set ATA disk parameters." msgstr "获取或设定 ATA 磁盘参数。" #: grub-core/commands/help.c:132 grub-core/lib/arg.c:110 msgid "Usage:" msgstr "用法：" #: grub-core/commands/help.c:148 msgid "[PATTERN ...]" msgstr "[模式 ...]" #: grub-core/commands/help.c:149 msgid "Show a help message." msgstr "显示帮助消息。" #: grub-core/commands/hexdump.c:31 msgid "Skip offset bytes from the beginning of file." msgstr "跳过文件头部偏移字节。" #: grub-core/commands/hexdump.c:33 msgid "Read only LENGTH bytes." msgstr "读取指定长度（字节）。" #: grub-core/commands/hexdump.c:125 msgid "[OPTIONS] FILE_OR_DEVICE" msgstr "[选项] 文件或设备" #: grub-core/commands/hexdump.c:126 msgid "Show raw contents of a file or memory." msgstr "显示文件或内存的原始内容。" #: grub-core/commands/i386/cmosdump.c:58 msgid "Show raw dump of the CMOS contents." msgstr "显示 CMOS 内容的原始转储。" #: grub-core/commands/i386/cmostest.c:108 #: grub-core/commands/i386/cmostest.c:111 #: grub-core/commands/i386/cmostest.c:114 msgid "BYTE:BIT" msgstr "字节:比特" #: grub-core/commands/i386/cmostest.c:109 msgid "Test bit at BYTE:BIT in CMOS." msgstr "测试 CMOS 中 字节:比特 位置的位。" #: grub-core/commands/i386/cmostest.c:112 msgid "Clear bit at BYTE:BIT in CMOS." msgstr "清除 CMOS 中 字节:比特 位置的位。" #. TRANSLATORS: A bit may be either set (1) or clear (0). #: grub-core/commands/i386/cmostest.c:116 msgid "Set bit at BYTE:BIT in CMOS." msgstr "设置 CMOS 中 字节:比特 位置的位。" #: grub-core/commands/i386/coreboot/cb_timestamps.c:120 msgid "Show coreboot boot time statistics." msgstr "显示 coreboot 引导时间统计信息。" #: grub-core/commands/i386/coreboot/cbls.c:137 msgid "List coreboot tables." msgstr "列出 coreboot 表。" #. TRANSLATORS: "(default)" at the end means that this option is used if #. no argument is specified. #: grub-core/commands/i386/cpuid.c:36 msgid "Check if CPU supports 64-bit (long) mode (default)." msgstr "检查 CPU 是否支持 64 位（长）模式（默认）。" #: grub-core/commands/i386/cpuid.c:37 msgid "Check if CPU supports Physical Address Extension." msgstr "检查 CPU 是否支持物理地址扩展。" #: grub-core/commands/i386/cpuid.c:119 msgid "Check for CPU features." msgstr "检查 CPU 特性。" #. TRANSLATORS: In this file "mapping" refers to a change GRUB makes so if #. your language doesn't have an equivalent of "mapping" you can #. use the word like "rerouting". #. #: grub-core/commands/i386/pc/drivemap.c:40 msgid "Show the current mappings." msgstr "显示当前映射。" #: grub-core/commands/i386/pc/drivemap.c:41 msgid "Reset all mappings to the default values." msgstr "重置所有映射为默认值。" #: grub-core/commands/i386/pc/drivemap.c:42 msgid "Perform both direct and reverse mappings." msgstr "同时进行直接和反向映射。" #: grub-core/commands/i386/pc/drivemap.c:181 msgid "No drives have been remapped" msgstr "没有驱动器被重新映射" #. TRANSLATORS: This is the header of mapping list. #. On the left is how OS will see the disks and #. on the right current GRUB vision. #: grub-core/commands/i386/pc/drivemap.c:188 msgid "OS disk #num ------> GRUB/BIOS device" msgstr "系统磁盘 #编号 ----> GRUB/BIOS 设备" #: grub-core/commands/i386/pc/drivemap.c:415 msgid "-l | -r | [-s] grubdev osdisk." msgstr "-l | -r | [-s] grub设备 系统磁盘" #: grub-core/commands/i386/pc/drivemap.c:416 msgid "Manage the BIOS drive mappings." msgstr "管理 BIOS 设备映射。" #: grub-core/commands/i386/pc/halt.c:31 msgid "Do not use APM to halt the computer." msgstr "不使用 APM 关闭计算机。" #: grub-core/commands/i386/pc/halt.c:119 msgid "Halt the system, if possible using APM." msgstr "优先使用 APM 关闭计算机。" #: grub-core/commands/i386/pc/lsapm.c:75 msgid "no APM found" msgstr "找不到 APM" #: grub-core/commands/i386/pc/lsapm.c:77 #, c-format msgid "" "Version %u.%u\n" "32-bit CS = 0x%x, len = 0x%x, offset = 0x%x\n" "16-bit CS = 0x%x, len = 0x%x\n" "DS = 0x%x, len = 0x%x\n" msgstr "" "版本 %u.%u\n" "32-bit CS = 0x%x, len = 0x%x, offset = 0x%x\n" "16-bit CS = 0x%x, len = 0x%x\n" "DS = 0x%x, len = 0x%x\n" #: grub-core/commands/i386/pc/lsapm.c:86 msgid "16-bit protected interface supported\n" msgstr "支持 16 位保护接口\n" #: grub-core/commands/i386/pc/lsapm.c:87 msgid "16-bit protected interface unsupported\n" msgstr "不支持 16 位保护接口\n" #: grub-core/commands/i386/pc/lsapm.c:89 msgid "32-bit protected interface supported\n" msgstr "支持 32 位保护接口\n" #: grub-core/commands/i386/pc/lsapm.c:90 msgid "32-bit protected interface unsupported\n" msgstr "不支持 32 位保护接口\n" #: grub-core/commands/i386/pc/lsapm.c:92 msgid "CPU Idle slows down processor\n" msgstr "CPU 空闲使得处理器变慢\n" #: grub-core/commands/i386/pc/lsapm.c:93 msgid "CPU Idle doesn't slow down processor\n" msgstr "CPU 空闲不使得处理器变慢\n" #: grub-core/commands/i386/pc/lsapm.c:95 msgid "APM disabled\n" msgstr "APM 已禁用\n" #: grub-core/commands/i386/pc/lsapm.c:95 msgid "APM enabled\n" msgstr "APM 已启用\n" #: grub-core/commands/i386/pc/lsapm.c:97 msgid "APM disengaged\n" msgstr "APM 已断开\n" #: grub-core/commands/i386/pc/lsapm.c:97 msgid "APM engaged\n" msgstr "APM 已连接\n" #: grub-core/commands/i386/pc/lsapm.c:107 msgid "Show APM information." msgstr "显示 APM 信息。" #. TRANSLATORS: It's musical notes, not the notes #. you take. Play command expects arguments which can #. be either a filename or tempo+notes. #. This error happens if none is specified. #: grub-core/commands/i386/pc/play.c:88 msgid "filename or tempo and notes expected" msgstr "需要文件名或者速度和音符" #: grub-core/commands/i386/pc/play.c:113 grub-core/commands/i386/pc/play.c:144 #, c-format msgid "Invalid tempo in %s" msgstr "%s 中的速度无效" #: grub-core/commands/i386/pc/play.c:151 grub-core/commands/macbless.c:172 #: grub-core/fs/archelp.c:260 grub-core/fs/bfs.c:623 grub-core/fs/bfs.c:706 #: grub-core/fs/btrfs.c:1855 grub-core/fs/btrfs.c:1884 #: grub-core/fs/btrfs.c:1928 grub-core/fs/btrfs.c:2016 #: grub-core/fs/btrfs.c:2040 grub-core/fs/fshelp.c:257 grub-core/fs/jfs.c:707 #: grub-core/fs/minix.c:430 grub-core/fs/ufs.c:544 grub-core/fs/zfs/zfs.c:2091 #: grub-core/fs/zfs/zfs.c:2103 grub-core/fs/zfs/zfs.c:2310 #: grub-core/net/http.c:128 #, c-format msgid "file `%s' not found" msgstr "文件 \"%s\" 未找到" #: grub-core/commands/i386/pc/play.c:162 grub-core/commands/i386/pc/play.c:171 #: grub-core/kern/misc.c:493 grub-core/script/execute.c:138 #: grub-core/script/execute.c:244 msgid "unrecognized number" msgstr "无法识别的数字" #: grub-core/commands/i386/pc/play.c:190 msgid "FILE | TEMPO [PITCH1 DURATION1] [PITCH2 DURATION2] ... " msgstr "文件 | 速度 [音高1 持续时间1] [音高2 持续时间2] ... " #: grub-core/commands/i386/pc/play.c:191 msgid "Play a tune." msgstr "播放一段旋律。" #: grub-core/commands/i386/pc/sendkey.c:39 msgid "set numlock mode" msgstr "设置 numlock 模式" #: grub-core/commands/i386/pc/sendkey.c:40 msgid "set capslock mode" msgstr "设置 capslock 模式" #: grub-core/commands/i386/pc/sendkey.c:41 msgid "set scrolllock mode" msgstr "设置 scrolllock 模式" #: grub-core/commands/i386/pc/sendkey.c:42 msgid "set insert mode" msgstr "设置插入模式" #: grub-core/commands/i386/pc/sendkey.c:43 msgid "set pause mode" msgstr "设置暂停模式" #: grub-core/commands/i386/pc/sendkey.c:44 msgid "press left shift" msgstr "按下左 shift" #: grub-core/commands/i386/pc/sendkey.c:45 msgid "press right shift" msgstr "按下右 shift" #: grub-core/commands/i386/pc/sendkey.c:46 msgid "press SysRq" msgstr "按下 SysRq" #: grub-core/commands/i386/pc/sendkey.c:47 msgid "press NumLock key" msgstr "按下 NumLock 键" #: grub-core/commands/i386/pc/sendkey.c:48 msgid "press CapsLock key" msgstr "按下 CapsLock 键" #: grub-core/commands/i386/pc/sendkey.c:49 msgid "press ScrollLock key" msgstr "按下 ScrollLock 键" #: grub-core/commands/i386/pc/sendkey.c:50 msgid "press Insert key" msgstr "按下 Insert 键" #: grub-core/commands/i386/pc/sendkey.c:51 msgid "press left alt" msgstr "按下左 alt" #: grub-core/commands/i386/pc/sendkey.c:52 msgid "press right alt" msgstr "按下右 alt" #: grub-core/commands/i386/pc/sendkey.c:53 msgid "press left ctrl" msgstr "按下左 ctrl" #: grub-core/commands/i386/pc/sendkey.c:54 msgid "press right ctrl" msgstr "按下右 ctrl" #: grub-core/commands/i386/pc/sendkey.c:55 msgid "don't update LED state" msgstr "不要更新 LED 状态" #: grub-core/commands/i386/pc/sendkey.c:372 msgid "[KEYSTROKE1] [KEYSTROKE2] ..." msgstr "[按键1] [按键2] ..." #. TRANSLATORS: It can emulate multiple #. keypresses. #: grub-core/commands/i386/pc/sendkey.c:375 msgid "Emulate a keystroke sequence" msgstr "模拟一个按键序列" #: grub-core/commands/i386/rdmsr.c:37 grub-core/commands/iorw.c:35 #: grub-core/commands/memrw.c:34 grub-core/commands/setpci.c:73 msgid "Save read value into variable VARNAME." msgstr "将读取的值存入变量 <变量名>。" #: grub-core/commands/i386/rdmsr.c:38 grub-core/commands/iorw.c:36 #: grub-core/commands/memrw.c:35 grub-core/commands/probe.c:42 #: grub-core/commands/search_wrap.c:40 grub-core/commands/setpci.c:74 #: grub-core/commands/tr.c:32 msgid "VARNAME" msgstr "变量名" #: grub-core/commands/i386/rdmsr.c:55 grub-core/commands/i386/rdmsr.c:60 #: grub-core/commands/i386/rdmsr.c:65 grub-core/commands/i386/wrmsr.c:48 #: grub-core/commands/i386/wrmsr.c:53 grub-core/commands/i386/wrmsr.c:58 msgid "unsupported instruction" msgstr "不支持的指令" #: grub-core/commands/i386/rdmsr.c:77 grub-core/commands/i386/wrmsr.c:70 #: grub-core/commands/i386/wrmsr.c:78 grub-core/net/dns.c:725 msgid "invalid argument" msgstr "无效的参数" #: grub-core/commands/i386/rdmsr.c:94 grub-core/commands/memrw.c:126 #: grub-core/commands/memrw.c:130 grub-core/commands/memrw.c:134 msgid "ADDR" msgstr "地址" #: grub-core/commands/i386/rdmsr.c:95 msgid "Read a CPU model specific register." msgstr "读取一个 CPU 型号专用寄存器 (MSR)。" #: grub-core/commands/i386/wrmsr.c:87 msgid "ADDR VALUE" msgstr "地址 值" #: grub-core/commands/i386/wrmsr.c:88 msgid "Write a value to a CPU model specific register." msgstr "将值写入到一个 CPU 型号专用寄存器 (MSR)。" #: grub-core/commands/ieee1275/suspend.c:34 msgid "Run `go' to resume GRUB." msgstr "运行 \"go\" 以恢复 GRUB 运行。" #: grub-core/commands/ieee1275/suspend.c:45 msgid "Return to IEEE1275 prompt." msgstr "回到 IEEE1275 提示符。" #: grub-core/commands/iorw.c:124 grub-core/commands/iorw.c:128 #: grub-core/commands/iorw.c:132 grub-core/gdb/gdb.c:79 msgid "PORT" msgstr "端口" #: grub-core/commands/iorw.c:124 msgid "Read 8-bit value from PORT." msgstr "从 <端口> 读取 8 比特值。" #: grub-core/commands/iorw.c:128 msgid "Read 16-bit value from PORT." msgstr "从 <端口> 读取 16 比特值。" #: grub-core/commands/iorw.c:132 msgid "Read 32-bit value from PORT." msgstr "从 <端口> 读取 32 比特值。" #: grub-core/commands/iorw.c:136 grub-core/commands/iorw.c:140 msgid "PORT VALUE [MASK]" msgstr "端口 值 [掩码]" #: grub-core/commands/iorw.c:137 msgid "Write 8-bit VALUE to PORT." msgstr "向 <端口> 写入 8 比特 <值>。" #: grub-core/commands/iorw.c:141 msgid "Write 16-bit VALUE to PORT." msgstr "向 <端口> 写入 16 比特 <值>。" #: grub-core/commands/iorw.c:144 grub-core/commands/memrw.c:138 #: grub-core/commands/memrw.c:142 grub-core/commands/memrw.c:146 msgid "ADDR VALUE [MASK]" msgstr "地址 值 [掩码]" #: grub-core/commands/iorw.c:145 msgid "Write 32-bit VALUE to PORT." msgstr "向 <端口> 写入 32 比特 <值>。" #: grub-core/commands/keylayouts.c:215 grub-core/commands/loadenv.c:61 #: grub-core/commands/nativedisk.c:189 grub-core/efiemu/main.c:235 #: grub-core/font/font.c:464 grub-core/gfxmenu/gfxmenu.c:63 #: grub-core/kern/device.c:42 grub-core/kern/dl.c:760 #, c-format msgid "variable `%s' isn't set" msgstr "变量 \"%s\" 未设置" #: grub-core/commands/keylayouts.c:301 msgid "Load a keyboard layout." msgstr "加载一个键盘布局。" #. TRANSLATORS: "Check" in a sense that if this key is pressed then #. "true" is returned, otherwise "false". #: grub-core/commands/keystatus.c:32 msgid "Check Shift key." msgstr "检查 Shift 键。" #: grub-core/commands/keystatus.c:33 msgid "Check Control key." msgstr "检查 Ctrl 键。" #: grub-core/commands/keystatus.c:34 msgid "Check Alt key." msgstr "检查 Alt 键。" #. TRANSLATORS: there are 3 modifiers. #: grub-core/commands/keystatus.c:88 msgid "Check key modifier status." msgstr "检查修饰键状态。" #: grub-core/commands/legacycfg.c:531 grub-core/commands/legacycfg.c:545 #: grub-core/commands/legacycfg.c:565 grub-core/commands/legacycfg.c:578 #: grub-core/commands/time.c:43 grub-core/script/function.c:119 #: util/grub-file.c:100 util/grub-fstest.c:57 util/grub-mount.c:68 #, c-format msgid "can't find command `%s'" msgstr "无法找到命令 \"%s\"" #: grub-core/commands/legacycfg.c:832 grub-core/normal/auth.c:225 #: util/grub-mkpasswd-pbkdf2.c:139 msgid "Enter password: " msgstr "输入密码：" #. TRANSLATORS: "legacy config" means #. "config as used by grub-legacy". #: grub-core/commands/legacycfg.c:856 msgid "Parse legacy config in same context" msgstr "在相同环境下解析旧版配置" #: grub-core/commands/legacycfg.c:861 msgid "Parse legacy config in new context" msgstr "在新环境下解析旧版配置" #: grub-core/commands/legacycfg.c:866 msgid "Parse legacy config in same context taking only menu entries" msgstr "在相同环境下解析旧版配置，只处理菜单项" #: grub-core/commands/legacycfg.c:871 msgid "Parse legacy config in new context taking only menu entries" msgstr "在新环境下解析旧版配置，只处理菜单项" #: grub-core/commands/legacycfg.c:875 msgid "[--no-mem-option] [--type=TYPE] FILE [ARG ...]" msgstr "[--no-mem-option] [--type=类型] 文件 [参数 ...]" #: grub-core/commands/legacycfg.c:876 msgid "Simulate grub-legacy `kernel' command" msgstr "模拟 grub-legacy \"kernel\" 命令" #: grub-core/commands/legacycfg.c:880 grub-core/commands/legacycfg.c:884 msgid "FILE [ARG ...]" msgstr "文件 [参数 ...]" #: grub-core/commands/legacycfg.c:881 msgid "Simulate grub-legacy `initrd' command" msgstr "模拟 grub-legacy \"initrd\" 命令" #: grub-core/commands/legacycfg.c:885 msgid "Simulate grub-legacy `modulenounzip' command" msgstr "模拟 grub-legacy \"modulenounzip\" 命令" #: grub-core/commands/legacycfg.c:889 grub-core/commands/legacycfg.c:894 msgid "[--md5] PASSWD [FILE]" msgstr "[--md5] 密码 [文件]" #: grub-core/commands/legacycfg.c:890 msgid "Simulate grub-legacy `password' command" msgstr "模拟 grub-legacy \"password\" 命令" #: grub-core/commands/legacycfg.c:895 msgid "Simulate grub-legacy `password' command in menu entry mode" msgstr "在菜单项模式下模拟 grub-legacy \"password\" 命令" #. TRANSLATORS: This option is used to override default filename #. for loading and storing environment. #: grub-core/commands/loadenv.c:37 msgid "Specify filename." msgstr "指定文件名。" #: grub-core/commands/loadenv.c:39 msgid "Skip signature-checking of the environment file." msgstr "跳过对环境文件的签名检查。" #: grub-core/commands/loadenv.c:453 msgid "[-f FILE] [-s|--skip-sig] [variable_name_to_whitelist] [...]" msgstr "[-f 文件] [-s|--skip-sig] [要加入白名单的变量名] [...]" #: grub-core/commands/loadenv.c:454 msgid "Load variables from environment block file." msgstr "从环境块文件中加载变量。" #: grub-core/commands/loadenv.c:457 msgid "[-f FILE]" msgstr "[-f 文件]" #: grub-core/commands/loadenv.c:458 msgid "List variables from environment block file." msgstr "列出环境块文件中的变量。" #: grub-core/commands/loadenv.c:462 msgid "[-f FILE] variable_name [...]" msgstr "[-f 文件] 变量名 [...]" #: grub-core/commands/loadenv.c:463 msgid "Save variables to environment block file." msgstr "将变量保存到环境块文件。" #: grub-core/commands/ls.c:40 msgid "Show a long list with more detailed information." msgstr "显示长列表，包含更详细的信息。" #: grub-core/commands/ls.c:41 msgid "Print sizes in a human readable format." msgstr "使用易读的格式显示文件大小。" #: grub-core/commands/ls.c:42 msgid "List all files." msgstr "列出全部文件。" #: grub-core/commands/ls.c:73 msgid "Network protocols:" msgstr "网络协议：" #: grub-core/commands/ls.c:295 msgid "[-l|-h|-a] [FILE ...]" msgstr "[-l|-h|-a] [文件 ...]" #: grub-core/commands/ls.c:296 msgid "List devices and files." msgstr "列出设备和文件。" #: grub-core/commands/lsacpi.c:255 msgid "Show version 1 tables only." msgstr "仅显示版本 1 的表。" #: grub-core/commands/lsacpi.c:256 msgid "Show version 2 and version 3 tables only." msgstr "仅显示版本 2 和版本 3 的表。" #: grub-core/commands/lsacpi.c:306 msgid "Show ACPI information." msgstr "显示 ACPI 信息。" #: grub-core/commands/lsmmap.c:31 msgid "available RAM" msgstr "可用 RAM" #: grub-core/commands/lsmmap.c:32 msgid "reserved RAM" msgstr "保留 RAM" #. TRANSLATORS: this refers to memory where ACPI tables are stored #. and which can be used by OS once it loads ACPI tables. #: grub-core/commands/lsmmap.c:35 msgid "ACPI reclaimable RAM" msgstr "ACPI 可回收 RAM" #. TRANSLATORS: this refers to memory which ACPI-compliant OS #. is required to save accross hibernations. #: grub-core/commands/lsmmap.c:38 msgid "ACPI non-volatile storage RAM" msgstr "ACPI 非易失性存储器 RAM" #: grub-core/commands/lsmmap.c:39 msgid "faulty RAM (BadRAM)" msgstr "有故障的 RAM (BadRAM)" #: grub-core/commands/lsmmap.c:40 msgid "persistent RAM" msgstr "持久化 RAM" #: grub-core/commands/lsmmap.c:41 msgid "persistent RAM (legacy)" msgstr "持久化 RAM（旧版）" #: grub-core/commands/lsmmap.c:42 msgid "RAM holding coreboot tables" msgstr "存有 coreboot 表的 RAM" #: grub-core/commands/lsmmap.c:43 msgid "RAM holding firmware code" msgstr "存有固件代码的 RAM" #: grub-core/commands/lsmmap.c:52 #, c-format msgid "base_addr = 0x%llx, length = 0x%llx, %s\n" msgstr "基本地址 = 0x%llx，长度 = 0x%llx，%s\n" #: grub-core/commands/lsmmap.c:55 #, c-format msgid "base_addr = 0x%llx, length = 0x%llx, type = 0x%x\n" msgstr "基本地址 = 0x%llx，长度 = 0x%llx，类型 = 0x%x\n" #: grub-core/commands/lsmmap.c:79 msgid "List memory map provided by firmware." msgstr "列出固件提供的内存映射。" #: grub-core/commands/lspci.c:232 msgid "List PCI devices." msgstr "列出 PCI 设备。" #: grub-core/commands/macbless.c:223 msgid "Bless FILE of HFS or HFS+ partition for intel macs." msgstr "对于 Intel Mac，\"bless\" HFS 或 HFS+ 分区的 <文件>。" #: grub-core/commands/macbless.c:226 msgid "Bless DIR of HFS or HFS+ partition for PPC macs." msgstr "对于 PPC Mac，\"bless\" HFS 或 HFS+ 分区的 <目录>。" #: grub-core/commands/memrw.c:126 msgid "Read 8-bit value from ADDR." msgstr "从 <地址> 读取 8 比特值。" #: grub-core/commands/memrw.c:130 msgid "Read 16-bit value from ADDR." msgstr "从 <地址> 读取 16 比特值。" #: grub-core/commands/memrw.c:134 msgid "Read 32-bit value from ADDR." msgstr "从 <地址> 读取 32 比特值。" #: grub-core/commands/memrw.c:139 msgid "Write 8-bit VALUE to ADDR." msgstr "向 <地址> 写入 8 比特 <值>。" #: grub-core/commands/memrw.c:143 msgid "Write 16-bit VALUE to ADDR." msgstr "向 <地址> 写入 16 比特 <值>。" #: grub-core/commands/memrw.c:147 msgid "Write 32-bit VALUE to ADDR." msgstr "向 <地址> 写入 32 比特 <值>。" #: grub-core/commands/memtools.c:140 msgid "List free and allocated memory blocks." msgstr "列出空闲和已分配的内存块。" #: grub-core/commands/memtools.c:142 msgid "List free memory blocks." msgstr "列出空闲的内存块。" #: grub-core/commands/memtools.c:144 msgid "Stress test large allocations." msgstr "对巨大的分配进行压力测试。" #: grub-core/commands/menuentry.c:31 msgid "Menu entry type." msgstr "菜单项类型。" #: grub-core/commands/menuentry.c:31 grub-core/commands/menuentry.c:38 #: grub-core/commands/menuentry.c:39 grub-core/gettext/gettext.c:520 #: util/grub-fstest.c:526 util/grub-install.c:291 util/grub-install.c:304 #: util/grub-mknetdir.c:51 util/grub-mkrescue.c:109 util/grub-mkrescue.c:110 #: util/grub-mount.c:472 util/grub-render-label.c:65 msgid "STRING" msgstr "字符串" #: grub-core/commands/menuentry.c:33 msgid "List of users allowed to boot this entry." msgstr "允许引导此项的用户列表。" #: grub-core/commands/menuentry.c:33 msgid "USERNAME[,USERNAME]" msgstr "用户名[,用户名]" #: grub-core/commands/menuentry.c:36 msgid "Keyboard key to quickly boot this entry." msgstr "快速引导此项的键盘按键。" #: grub-core/commands/menuentry.c:36 msgid "KEYBOARD_KEY" msgstr "键盘按键" #: grub-core/commands/menuentry.c:38 msgid "Use STRING as menu entry body." msgstr "使用 <字符串> 作为菜单项主体。" #: grub-core/commands/menuentry.c:39 msgid "Menu entry identifier." msgstr "菜单项标识符。" #. TRANSLATORS: menu entry can either be bootable by anyone or only by #. handful of users. By default when security is active only superusers can #. boot a given menu entry. With --unrestricted (this option) #. anyone can boot it. #: grub-core/commands/menuentry.c:44 msgid "This entry can be booted by any user." msgstr "该项可以由任何用户引导启动。" #: grub-core/commands/menuentry.c:323 grub-core/commands/menuentry.c:328 #: grub-core/tests/test_blockarg.c:46 msgid "BLOCK" msgstr "块" #: grub-core/commands/menuentry.c:323 msgid "Define a menu entry." msgstr "定义一个菜单项。" #: grub-core/commands/menuentry.c:328 msgid "Define a submenu." msgstr "定义一个子菜单。" #. TRANSLATORS: this is module list header. Name #. is module name, Ref Count is a reference counter #. (how many modules or open descriptors use it). #. Dependencies are the other modules it uses. #. #: grub-core/commands/minicmd.c:165 msgid "Name\tRef Count\tDependencies\n" msgstr "名称\t引用计数\t依赖\n" #: grub-core/commands/minicmd.c:204 msgid "Show this message." msgstr "显示此消息。" #: grub-core/commands/minicmd.c:207 msgid "ADDR [SIZE]" msgstr "地址 [大小]" #: grub-core/commands/minicmd.c:207 msgid "Show memory contents." msgstr "显示内存内容。" #: grub-core/commands/minicmd.c:210 grub-core/kern/corecmd.c:191 #: util/grub-install.c:275 msgid "MODULE" msgstr "模块" #: grub-core/commands/minicmd.c:210 msgid "Remove a module." msgstr "删除模块。" #: grub-core/commands/minicmd.c:213 msgid "Show loaded modules." msgstr "显示已加载的模块。" #: grub-core/commands/minicmd.c:216 msgid "Exit from GRUB." msgstr "退出 GRUB。" #: grub-core/commands/mips/loongson/lsspd.c:42 msgid "No CS5536 found" msgstr "未找到 CS5536" #: grub-core/commands/mips/loongson/lsspd.c:45 #, c-format msgid "CS5536 at %d:%d.%d\n" msgstr "CS5536 位于 %d:%d.%d\n" #. TRANSLATORS: System management bus is often used to access components like #. RAM (info only, not data) or batteries. I/O space is where in memory #. its ports are. #: grub-core/commands/mips/loongson/lsspd.c:55 #, c-format msgid "System management bus controller I/O space is at 0x%x\n" msgstr "系统管理总线控制器 I/O 空间位于 0x%x\n" #. TRANSLATORS: it's shown in a report in a way #. like number 1: ... number 2: ... #. #: grub-core/commands/mips/loongson/lsspd.c:66 #, c-format msgid "RAM slot number %d\n" msgstr "RAM 插槽编号 %d\n" #: grub-core/commands/mips/loongson/lsspd.c:73 #, c-format msgid "Written SPD bytes: %d B.\n" msgstr "已写入的 SPD 字节数：%d B。\n" #: grub-core/commands/mips/loongson/lsspd.c:74 #, c-format msgid "Total flash size: %d B.\n" msgstr "flash 总大小：%d B。\n" #: grub-core/commands/mips/loongson/lsspd.c:79 msgid "Memory type: DDR2." msgstr "内存类型：DDR2。" #: grub-core/commands/mips/loongson/lsspd.c:83 #, c-format msgid "Part no: %s.\n" msgstr "元件编号：%s。\n" #: grub-core/commands/mips/loongson/lsspd.c:86 msgid "Memory type: Unknown." msgstr "内存类型：未知。" #: grub-core/commands/mips/loongson/lsspd.c:97 msgid "Print Memory information." msgstr "输出内存信息。" #: grub-core/commands/nativedisk.c:118 grub-core/commands/probe.c:180 #: grub-core/commands/probe.c:192 util/grub-probe.c:450 #, c-format msgid "%s does not support UUIDs" msgstr "%s 不支持 UUID" #: grub-core/commands/nativedisk.c:325 msgid "[MODULE1 MODULE2 ...]" msgstr "[模块1 模块2 ...]" #: grub-core/commands/nativedisk.c:326 msgid "Switch to native disk drivers. If no modules are specified default set (pata,ahci,usbms,ohci,uhci,ehci) is used" msgstr "切换为使用原生磁盘驱动程序。如果没有指定模块，则使用默认集合 (pata,ahci,usbms,ohci,uhci,ehci)。" #: grub-core/commands/parttool.c:40 msgid "" "Perform COMMANDS on partition.\n" "Use `parttool PARTITION help' for the list of available commands." msgstr "" "对分区执行 <命令>。\n" "使用 \"parttool 分区 help\" 以获得可用的命令列表。" #: grub-core/commands/parttool.c:129 msgid "=VAL" msgstr "=值" #: grub-core/commands/parttool.c:142 #, c-format msgid "Sorry, no parttool is available for %s\n" msgstr "抱歉，%s 没有可用的分区工具（parttool）\n" #: grub-core/commands/parttool.c:294 grub-core/lib/arg.c:292 #: grub-core/lib/arg.c:371 #, c-format msgid "unknown argument `%s'" msgstr "未知的参数 \"%s\"" #: grub-core/commands/parttool.c:350 msgid "PARTITION COMMANDS" msgstr "分区 命令" #: grub-core/commands/password.c:85 msgid "USER PASSWORD" msgstr "用户 密码" #: grub-core/commands/password.c:86 msgid "Set user password (plaintext). Unrecommended and insecure." msgstr "设置用户密码（纯文本）。不安全，不推荐使用。" #. TRANSLATORS: it means that the string which #. was supposed to be a password hash doesn't #. have a correct format, not to password #. mismatch. #: grub-core/commands/password_pbkdf2.c:98 #: grub-core/commands/password_pbkdf2.c:115 #: grub-core/commands/password_pbkdf2.c:123 #: grub-core/commands/password_pbkdf2.c:150 #: grub-core/commands/password_pbkdf2.c:179 msgid "invalid PBKDF2 password" msgstr "无效的 PBKDF2 密码" #: grub-core/commands/password_pbkdf2.c:202 msgid "USER PBKDF2_PASSWORD" msgstr "用户 PBKDF2密码" #: grub-core/commands/password_pbkdf2.c:203 msgid "Set user password (PBKDF2). " msgstr "设置用户密码（PBKDF2）。" #: grub-core/commands/pcidump.c:39 grub-core/commands/setpci.c:69 msgid "Select device by vendor and device IDs." msgstr "按供应商和设备 ID 选择设备。" #: grub-core/commands/pcidump.c:40 grub-core/commands/setpci.c:70 msgid "[vendor]:[device]" msgstr "[供应商]:[设备]" #: grub-core/commands/pcidump.c:41 grub-core/commands/setpci.c:71 msgid "Select device by its position on the bus." msgstr "根据在总线上的位置选择设备。" #: grub-core/commands/pcidump.c:42 grub-core/commands/setpci.c:72 msgid "[bus]:[slot][.func]" msgstr "[总线]:[插槽][.功能]" #: grub-core/commands/pcidump.c:109 grub-core/commands/pcidump.c:137 #: grub-core/commands/setpci.c:183 grub-core/commands/setpci.c:213 #: grub-core/fs/zfs/zfs.c:3828 grub-core/kern/emu/hostdisk.c:458 #: grub-core/kern/emu/hostdisk.c:473 grub-core/kern/file.c:44 #, c-format msgid "missing `%c' symbol" msgstr "缺少 \"%c\" 符号" #: grub-core/commands/pcidump.c:167 msgid "[-s POSITION] [-d DEVICE]" msgstr "[-s 位置] [-d 设备]" #: grub-core/commands/pcidump.c:168 msgid "Show raw dump of the PCI configuration space." msgstr "显示 PCI 配置空间的原始转储数据。" #: grub-core/commands/pgp.c:45 msgid "Skip signature-checking of the public key file." msgstr "跳过公钥文件的签名检查。" #. TRANSLATORS: it's about GNUPG signatures. #: grub-core/commands/pgp.c:71 grub-core/commands/pgp.c:81 #: grub-core/commands/pgp.c:86 grub-core/commands/pgp.c:96 #: grub-core/commands/pgp.c:103 grub-core/commands/pgp.c:107 #: grub-core/commands/pgp.c:114 grub-core/commands/pgp.c:119 #: grub-core/commands/pgp.c:124 grub-core/commands/pgp.c:128 #: grub-core/commands/pgp.c:268 grub-core/commands/pgp.c:276 #: grub-core/commands/pgp.c:281 grub-core/commands/pgp.c:289 #: grub-core/commands/pgp.c:320 grub-core/commands/pgp.c:327 #: grub-core/commands/pgp.c:332 grub-core/commands/pgp.c:342 #: grub-core/commands/pgp.c:468 grub-core/commands/pgp.c:471 #: grub-core/commands/pgp.c:474 grub-core/commands/pgp.c:477 #: grub-core/commands/pgp.c:484 grub-core/commands/pgp.c:490 #: grub-core/commands/pgp.c:665 msgid "bad signature" msgstr "无效的签名" #: grub-core/commands/pgp.c:637 msgid "public key %08" msgstr "公钥 %08" #: grub-core/commands/pgp.c:651 grub-core/disk/diskfilter.c:799 #: grub-core/disk/diskfilter.c:809 grub-core/fs/ntfs.c:404 #: grub-core/fs/zfs/zfs.c:1941 grub-core/normal/menu.c:427 #, c-format msgid "module `%s' isn't loaded" msgstr "模块 \"%s\" 未加载" #. TRANSLATORS: %08x is 32-bit key id. #: grub-core/commands/pgp.c:812 #, c-format msgid "public key %08x not found" msgstr "公钥 %08x 未找到" #: grub-core/commands/pgp.c:994 msgid "[-s|--skip-sig] FILE SIGNATURE_FILE [PUBKEY_FILE]" msgstr "[-s|--skip-sig] 文件 签名文件 [公钥文件]" #: grub-core/commands/pgp.c:995 msgid "Verify detached signature." msgstr "验证分离的签名。" #: grub-core/commands/pgp.c:998 msgid "[-s|--skip-sig] PUBKEY_FILE" msgstr "[-s|--skip-sig] 公钥文件" #: grub-core/commands/pgp.c:999 msgid "Add PUBKEY_FILE to trusted keys." msgstr "向信任密钥列表中添加指定 <公钥文件>。" #: grub-core/commands/pgp.c:1003 msgid "Show the list of trusted keys." msgstr "显示信任密钥列表。" #: grub-core/commands/pgp.c:1005 msgid "PUBKEY_ID" msgstr "公钥ID" #: grub-core/commands/pgp.c:1006 msgid "Remove PUBKEY_ID from trusted keys." msgstr "从信任密钥列表中删除指定 <公钥ID> 对应的项。" #: grub-core/commands/probe.c:42 grub-core/commands/tr.c:32 msgid "Set a variable to return value." msgstr "设置用于返回值的变量。" #. TRANSLATORS: It's a driver that is currently in use to access #. the diven disk. #: grub-core/commands/probe.c:45 msgid "Determine driver." msgstr "确定驱动程序。" #: grub-core/commands/probe.c:46 msgid "Determine partition map type." msgstr "确定分区表类型。" #: grub-core/commands/probe.c:47 msgid "Determine filesystem type." msgstr "确定文件系统类型。" #: grub-core/commands/probe.c:48 msgid "Determine filesystem UUID." msgstr "确定文件系统 UUID。" #: grub-core/commands/probe.c:49 msgid "Determine filesystem label." msgstr "确定文件系统标签。" #: grub-core/commands/probe.c:50 msgid "Determine partition UUID." msgstr "确定分区 UUID。" #: grub-core/commands/probe.c:210 grub-core/commands/probe.c:223 #: util/grub-probe.c:462 #, c-format msgid "filesystem `%s' does not support labels" msgstr "文件系统 \"%s\" 不支持标签" #: grub-core/commands/probe.c:243 grub-core/fs/zfs/zfsinfo.c:430 #: grub-core/loader/i386/bsd.c:170 util/grub-setup.c:223 msgid "DEVICE" msgstr "设备" #: grub-core/commands/probe.c:244 msgid "Retrieve device info." msgstr "获取设备信息。" #: grub-core/commands/read.c:33 msgid "Do not echo input" msgstr "不要回显输入" #: grub-core/commands/read.c:96 msgid "[-s] [ENVVAR]" msgstr "[-s] [环境变量]" #: grub-core/commands/read.c:97 msgid "Set variable with user input." msgstr "将用户输入值保存到变量。" #: grub-core/commands/reboot.c:40 msgid "Reboot the computer." msgstr "重新启动计算机。" #. TRANSLATORS: in regexp you can mark some #. groups with parentheses. These groups are #. then numbered and you can save some of #. them in variables. In other programs #. those components are often referenced with #. back slash, e.g. \1. Compare #. sed -e 's,\([a-z][a-z]*\),lowercase=\1,g' #. The whole matching component is saved in VARNAME, not its number. #. #: grub-core/commands/regexp.c:44 msgid "Store matched component NUMBER in VARNAME." msgstr "将第 <数字> 个匹配的部分储存到 <变量名>。" #: grub-core/commands/regexp.c:45 msgid "[NUMBER:]VARNAME" msgstr "[数字:]变量名" #. TRANSLATORS: This are two arguments. So it's #. two separate units to translate and pay #. attention not to reverse them. #: grub-core/commands/regexp.c:157 msgid "REGEXP STRING" msgstr "正则表达式 字符串" #: grub-core/commands/regexp.c:158 msgid "Test if REGEXP matches STRING." msgstr "测试 <正则表达式> 是否匹配相应的 <字符串>。" #: grub-core/commands/search.c:344 msgid "NAME [VARIABLE] [HINTS]" msgstr "名称 [变量] [提示]" #: grub-core/commands/search_file.c:4 msgid "Search devices by file. If VARIABLE is specified, the first device found is set to a variable." msgstr "按文件搜索设备。如果指定了 <变量>，则将找到的第一个设备保存到变量中。" #: grub-core/commands/search_label.c:4 msgid "Search devices by label. If VARIABLE is specified, the first device found is set to a variable." msgstr "按标签搜索设备。如果指定了 <变量>，则将找到的第一个设备保存到变量中。" #: grub-core/commands/search_uuid.c:4 msgid "Search devices by UUID. If VARIABLE is specified, the first device found is set to a variable." msgstr "按 UUID 搜索设备。如果指定了 <变量>，则将找到的第一个设备保存到变量中。" #: grub-core/commands/search_wrap.c:34 msgid "Search devices by a file." msgstr "按文件搜索设备。" #: grub-core/commands/search_wrap.c:35 msgid "Search devices by a filesystem label." msgstr "按文件系统标签搜索设备。" #: grub-core/commands/search_wrap.c:37 msgid "Search devices by a filesystem UUID." msgstr "按文件系统 UUID 搜索设备。" #: grub-core/commands/search_wrap.c:40 msgid "Set a variable to the first device found." msgstr "将变量设为找到的第一个设备。" #: grub-core/commands/search_wrap.c:42 msgid "Do not probe any floppy drive." msgstr "不检测任何软盘驱动器。" #: grub-core/commands/search_wrap.c:43 msgid "Only probe EFI disks." msgstr "只检测 EFI 磁盘。" #: grub-core/commands/search_wrap.c:45 msgid "First try the device HINT. If HINT ends in comma, also try subpartitions" msgstr "首先尝试名为 <提示> 的设备，如果 <提示> 以逗号结尾，则同时尝试其子分区" #: grub-core/commands/search_wrap.c:46 grub-core/commands/search_wrap.c:50 #: grub-core/commands/search_wrap.c:54 grub-core/commands/search_wrap.c:58 #: grub-core/commands/search_wrap.c:62 grub-core/commands/search_wrap.c:66 msgid "HINT" msgstr "提示" #: grub-core/commands/search_wrap.c:48 msgid "First try the device HINT if currently running on IEEE1275. If HINT ends in comma, also try subpartitions" msgstr "如果运行于 IEEE1275，则首先尝试名为 <提示> 的设备。如果 <提示> 以逗号结尾，则同时尝试其子分区" #: grub-core/commands/search_wrap.c:52 msgid "First try the device HINT if currently running on BIOS. If HINT ends in comma, also try subpartitions" msgstr "如果运行于 BIOS，则首先尝试名为 <提示> 的设备。如果 <提示> 以逗号结尾，则同时尝试其子分区" #: grub-core/commands/search_wrap.c:56 msgid "First try the device HINT if direct hardware access is supported. If HINT ends in comma, also try subpartitions" msgstr "如果支持直接硬件访问，则首先尝试名为 <提示> 的设备。如果 <提示> 以逗号结尾，则同时尝试其子分区" #: grub-core/commands/search_wrap.c:60 msgid "First try the device HINT if currently running on EFI. If HINT ends in comma, also try subpartitions" msgstr "如果运行于 EFI，则首先尝试名为 <提示> 的设备。如果 <提示> 以逗号结尾，则同时尝试其子分区" #: grub-core/commands/search_wrap.c:64 msgid "First try the device HINT if currently running on ARC. If HINT ends in comma, also try subpartitions" msgstr "如果运行于 ARC，则首先尝试名为 <提示> 的设备。如果 <提示> 以逗号结尾，则同时尝试其子分区" #: grub-core/commands/search_wrap.c:213 msgid "[-f|-l|-u|-s|-n] [--hint HINT [--hint HINT] ...] NAME" msgstr "[-f|-l|-u|-s|-n] [--hint 提示 [--hint 提示] ...] 名称" #: grub-core/commands/search_wrap.c:215 msgid "Search devices by file, filesystem label or filesystem UUID. If --set is specified, the first device found is set to a variable. If no variable name is specified, `root' is used." msgstr "按文件、文件系统标签或 UUID 搜索设备。如果指定了 --set，则会将找到的第一个设备保存到变量中。如果没有指定变量名，则保存到 \"root\"。" # grub_printf 不支持更改参数顺序。 #: grub-core/commands/setpci.c:132 #, c-format msgid "Register %x of %x:%02x.%x is %x\n" msgstr "寄存器 %x（属于 %x:%02x.%x）是 %x\n" #: grub-core/commands/setpci.c:331 msgid "[-s POSITION] [-d DEVICE] [-v VAR] REGISTER[=VALUE[:MASK]]" msgstr "[-s 位置] [-d 设备] [-v 变量] 寄存器[=值[:掩码]]" #: grub-core/commands/setpci.c:333 msgid "Manipulate PCI devices." msgstr "操作 PCI 设备。" #: grub-core/commands/sleep.c:32 msgid "Verbose countdown." msgstr "显示详细的倒计时。" #: grub-core/commands/sleep.c:33 msgid "Allow to interrupt with ESC." msgstr "允许使用 ESC 键中断。" #: grub-core/commands/sleep.c:109 msgid "NUMBER_OF_SECONDS" msgstr "秒数" #: grub-core/commands/sleep.c:110 msgid "Wait for a specified number of seconds." msgstr "等待指定时间（秒）。" #: grub-core/commands/smbios.c:197 msgid "Match structures with the given type." msgstr "匹配具有指定类型的结构。" #: grub-core/commands/smbios.c:198 grub-core/loader/i386/bsd.c:490 #: grub-core/loader/i386/bsd.c:556 msgid "type" msgstr "类型" #: grub-core/commands/smbios.c:199 msgid "Match structures with the given handle." msgstr "匹配具有指定句柄的结构。" #: grub-core/commands/smbios.c:200 msgid "handle" msgstr "句柄" #: grub-core/commands/smbios.c:201 msgid "Select a structure when several match." msgstr "有多个匹配时，选择一个结构。" #: grub-core/commands/smbios.c:202 msgid "match" msgstr "匹配" #: grub-core/commands/smbios.c:203 msgid "Get the byte's value at the given offset." msgstr "在指定偏移量处获取单个字节的值。" #: grub-core/commands/smbios.c:204 grub-core/commands/smbios.c:206 #: grub-core/commands/smbios.c:208 grub-core/commands/smbios.c:210 #: grub-core/commands/smbios.c:212 grub-core/commands/smbios.c:214 msgid "offset" msgstr "偏移量" #: grub-core/commands/smbios.c:205 msgid "Get two bytes' value at the given offset." msgstr "在指定偏移量处获取两个字节的值。" #: grub-core/commands/smbios.c:207 msgid "Get four bytes' value at the given offset." msgstr "在指定偏移量处获取四个字节的值。" #: grub-core/commands/smbios.c:209 msgid "Get eight bytes' value at the given offset." msgstr "在指定偏移量处获取八个字节的值。" #: grub-core/commands/smbios.c:211 msgid "Get the string specified at the given offset." msgstr "在指定偏移量处获取字符串。" #: grub-core/commands/smbios.c:213 msgid "Get the UUID's value at the given offset." msgstr "在指定偏移量处获取 UUID 的值。" #: grub-core/commands/smbios.c:215 msgid "Store the value in the given variable name." msgstr "将值存入指定的变量名。" #: grub-core/commands/smbios.c:216 grub-core/commands/smbios.c:218 msgid "variable" msgstr "变量" #: grub-core/commands/smbios.c:217 msgid "Filter the result like linux does." msgstr "像 Linux 那样过滤结果。" #: grub-core/commands/smbios.c:289 msgid "the SMBIOS entry point structure was not found" msgstr "未找到 SMBIOS 入口点结构" #: grub-core/commands/smbios.c:297 msgid "the type must be between 0 and 255" msgstr "类型必须在 0 到 255 之间" #: grub-core/commands/smbios.c:305 msgid "the handle must be between 0 and 65535" msgstr "句柄必须在 0 到 65535 之间" #: grub-core/commands/smbios.c:313 msgid "the match must be a positive integer" msgstr "匹配必须是正整数" #: grub-core/commands/smbios.c:323 msgid "only one --get option is usable at a time" msgstr "一次只能使用一个 --get 选项" #: grub-core/commands/smbios.c:330 msgid "one of the --get options is required" msgstr "需要 --get 选项中的一个" #: grub-core/commands/smbios.c:336 msgid "no structure matched the given options" msgstr "没有结构和指定的选项匹配" #: grub-core/commands/smbios.c:342 msgid "the given offset is outside the structure" msgstr "指定的偏移量超出了结构的范围" #: grub-core/commands/smbios.c:348 msgid "the field ends outside the structure" msgstr "字段的结尾超出了结构的范围" #: grub-core/commands/smbios.c:354 msgid "failed to retrieve the structure field" msgstr "无法获取结构字段" #: grub-core/commands/smbios.c:389 msgid "[-t type] [-h handle] [-m match] (-b|-w|-d|-q|-s|-u) offset [--set variable]" msgstr "[-t 类型] [-h 句柄] [-m 匹配] (-b|-w|-d|-q|-s|-u) 偏移量 [--set 变量]" #: grub-core/commands/smbios.c:392 msgid "Retrieve SMBIOS information." msgstr "获取 SMBIOS 信息。" #: grub-core/commands/syslinuxcfg.c:50 util/grub-syslinux2cfg.c:66 msgid "root directory of the syslinux disk [default=/]." msgstr "syslinux 磁盘的根目录 [默认=/]。" #: grub-core/commands/syslinuxcfg.c:53 util/grub-syslinux2cfg.c:72 msgid "current directory of syslinux [default is parent directory of input file]." msgstr "syslinux 的当前目录 [默认为输入文件的父目录]。" #: grub-core/commands/syslinuxcfg.c:55 util/grub-syslinux2cfg.c:75 msgid "assume input is an isolinux configuration file." msgstr "假定输入是 isolinux 配置文件。" #: grub-core/commands/syslinuxcfg.c:56 util/grub-syslinux2cfg.c:76 msgid "assume input is a pxelinux configuration file." msgstr "假定输入是 pxelinux 配置文件。" #: grub-core/commands/syslinuxcfg.c:57 util/grub-syslinux2cfg.c:77 msgid "assume input is a syslinux configuration file." msgstr "假定输入是 syslinux 配置文件。" #. TRANSLATORS: "syslinux config" means #. "config as used by syslinux". #: grub-core/commands/syslinuxcfg.c:189 msgid "Execute syslinux config in same context" msgstr "执行 syslinux 配置（在相同环境中）" #: grub-core/commands/syslinuxcfg.c:195 msgid "Execute syslinux config in new context" msgstr "执行 syslinux 配置（在新的环境中）" #: grub-core/commands/syslinuxcfg.c:201 msgid "Execute syslinux config in same context taking only menu entries" msgstr "执行 syslinux 配置（在相同环境中，仅加载菜单项）" #: grub-core/commands/syslinuxcfg.c:207 msgid "Execute syslinux config in new context taking only menu entries" msgstr "执行 syslinux 配置（在新的环境中，仅加载菜单项）" #: grub-core/commands/terminal.c:90 msgid "no terminal specified" msgstr "没有指定终端" #: grub-core/commands/terminal.c:112 grub-core/commands/terminal.c:139 #, c-format msgid "terminal `%s' isn't found" msgstr "未找到终端 \"%s\"" #: grub-core/commands/terminal.c:244 msgid "Active input terminals:" msgstr "活动的输入终端：" #: grub-core/commands/terminal.c:245 msgid "Available input terminals:" msgstr "可用的输入终端：" #: grub-core/commands/terminal.c:261 msgid "Active output terminals:" msgstr "活动的输出终端：" #: grub-core/commands/terminal.c:262 msgid "Available output terminals:" msgstr "可用的输出终端：" #: grub-core/commands/terminal.c:271 grub-core/commands/terminal.c:276 msgid "[--append|--remove] [TERMINAL1] [TERMINAL2] ..." msgstr "[--append|--remove] [终端1] [终端2] ..." #: grub-core/commands/terminal.c:273 msgid "List or select an input terminal." msgstr "列出或选择一个输入终端。" #: grub-core/commands/terminal.c:278 msgid "List or select an output terminal." msgstr "列出或选择一个输出终端。" #: grub-core/commands/test.c:444 msgid "EXPRESSION ]" msgstr "表达式 ]" #: grub-core/commands/test.c:444 grub-core/commands/test.c:447 msgid "Evaluate an expression." msgstr "对表达式进行求值。" #: grub-core/commands/test.c:447 msgid "EXPRESSION" msgstr "表达式" #: grub-core/commands/testload.c:166 msgid "Load the same file in multiple ways." msgstr "以多种方式加载同一个文件。" #: grub-core/commands/testspeed.c:35 msgid "Specify size for each read operation" msgstr "为每次读取操作指定大小" #: grub-core/commands/testspeed.c:58 msgid "invalid block size" msgstr "无效的块大小" #: grub-core/commands/testspeed.c:80 #, c-format msgid "File size: %s\n" msgstr "文件大小：%s\n" #: grub-core/commands/testspeed.c:83 #, c-format msgid "Elapsed time: %d.%03d s \n" msgstr "经过时间：%d.%03d 秒\n" #: grub-core/commands/testspeed.c:92 #, c-format msgid "Speed: %s \n" msgstr "速度：%s \n" #: grub-core/commands/testspeed.c:107 msgid "[-s SIZE] FILENAME" msgstr "[-s 大小] 文件名" #: grub-core/commands/testspeed.c:108 msgid "Test file read speed." msgstr "测试文件读取速度。" #: grub-core/commands/time.c:38 grub-core/script/execute.c:979 msgid "no command is specified" msgstr "没有指定命令" #: grub-core/commands/time.c:50 #, c-format msgid "Elapsed time: %d.%03d seconds \n" msgstr "经过时间：%d.%03d 秒\n" #: grub-core/commands/time.c:61 msgid "COMMAND [ARGS]" msgstr "命令 [参数]" #: grub-core/commands/time.c:62 msgid "Measure time used by COMMAND" msgstr "测量给定 <命令> 所使用的时间" #: grub-core/commands/tr.c:33 msgid "Translate to upper case." msgstr "转换至大写。" #: grub-core/commands/tr.c:34 msgid "Translate to lower case." msgstr "转换至小写。" #: grub-core/commands/tr.c:119 msgid "[OPTIONS] [SET1] [SET2] [STRING]" msgstr "[选项] [集合] [集合2] [字符串]" #: grub-core/commands/tr.c:120 msgid "Translate SET1 characters to SET2 in STRING." msgstr "将 <字符串> 中 <集合1> 中的字符串替换为 <集合2> 中的字符。" #. TRANSLATORS: it's a command description. #: grub-core/commands/true.c:50 msgid "Do nothing, successfully." msgstr "不做任何事，返回成功。" #. TRANSLATORS: it's a command description. #: grub-core/commands/true.c:54 msgid "Do nothing, unsuccessfully." msgstr "不做任何事，返回失败。" #: grub-core/commands/usbtest.c:221 msgid "Test USB support." msgstr "测试 USB 支持。" #: grub-core/commands/videoinfo.c:61 msgid "Text-only " msgstr "仅文本 " #. TRANSLATORS: "Direct color" is a mode when the color components #. are written dirrectly into memory. #: grub-core/commands/videoinfo.c:66 #, c-format msgid "Direct color, mask: %d/%d/%d/%d pos: %d/%d/%d/%d" msgstr "直接颜色，掩码：%d/%d/%d/%d 位置：%d/%d/%d/%d" #. TRANSLATORS: In "paletted color" mode you write the index of the color #. in the palette. Synonyms include "packed pixel". #: grub-core/commands/videoinfo.c:78 msgid "Paletted " msgstr "调色板 " #: grub-core/commands/videoinfo.c:80 msgid "YUV " msgstr "YUV " #. TRANSLATORS: "Planar" is the video memory where you have to write #. in several different banks "plans" to control the different color #. components of the same pixel. #: grub-core/commands/videoinfo.c:85 msgid "Planar " msgstr "平面 " #: grub-core/commands/videoinfo.c:87 msgid "Hercules " msgstr "大力神 " #: grub-core/commands/videoinfo.c:89 msgid "CGA " msgstr "CGA " #. TRANSLATORS: Non-chain 4 is a 256-color planar #. (unchained) video memory mode. #: grub-core/commands/videoinfo.c:93 msgid "Non-chain 4 " msgstr "无链 4 " #: grub-core/commands/videoinfo.c:95 msgid "Monochrome " msgstr "单色 " #: grub-core/commands/videoinfo.c:97 msgid "Unknown video mode " msgstr "未知视频模式 " #: grub-core/commands/videoinfo.c:111 msgid " EDID checksum invalid" msgstr " EDID 校验和无效" #: grub-core/commands/videoinfo.c:116 #, c-format msgid " EDID version: %u.%u\n" msgstr " EDID 版本：%u.%u\n" #: grub-core/commands/videoinfo.c:120 #, c-format msgid " Preferred mode: %ux%u\n" msgstr " 首选模式：%ux%u\n" #: grub-core/commands/videoinfo.c:123 msgid " No preferred mode available\n" msgstr " 没有可用的首选模式\n" #: grub-core/commands/videoinfo.c:146 grub-core/video/video.c:490 #: grub-core/video/video.c:498 grub-core/video/video.c:509 #: grub-core/video/video.c:520 grub-core/video/video.c:528 #, c-format msgid "invalid video mode specification `%s'" msgstr "无效的视频模式说明符 \"%s\"" #: grub-core/commands/videoinfo.c:168 msgid "List of supported video modes:" msgstr "支持的视频模式列表：" #: grub-core/commands/videoinfo.c:169 msgid "Legend: mask/position=red/green/blue/reserved" msgstr "说明：掩码/位置=红/绿/蓝/保留" #: grub-core/commands/videoinfo.c:176 #, c-format msgid "Adapter `%s':\n" msgstr "适配器 \"%s\"：\n" #: grub-core/commands/videoinfo.c:180 msgid " No info available" msgstr " 没有可用信息" #: grub-core/commands/videoinfo.c:198 msgid " Failed to initialize video adapter" msgstr " 初始化视频适配器失败" #. TRANSLATORS: "x" has to be entered in, #. like an identifier, so please don't #. use better Unicode codepoints. #: grub-core/commands/videoinfo.c:239 grub-core/commands/videoinfo.c:248 msgid "[WxH[xD]]" msgstr "[宽x高[x深]]" #: grub-core/commands/videoinfo.c:240 grub-core/commands/videoinfo.c:249 msgid "List available video modes. If resolution is given show only modes matching it." msgstr "列出可用的显示模式。如果指定了分辨率，则只显示匹配的模式。" #. TRANSLATORS: "x" has to be entered in, #. like an identifier, so please don't #. use better Unicode codepoints. #: grub-core/commands/videotest.c:225 msgid "[WxH]" msgstr "[宽x高]" #. TRANSLATORS: Here, on the other hand, it's #. nicer to use unicode cross instead of x. #: grub-core/commands/videotest.c:228 msgid "Test video subsystem in mode WxH." msgstr "在 宽x高 模式下测试显示子系统。" #: grub-core/commands/videotest.c:231 msgid "Test video subsystem." msgstr "测试显示子系统。" #: grub-core/commands/xen/lsxen.c:80 grub-core/commands/xen/lsxen.c:82 msgid "[DIR]" msgstr "[目录]" #: grub-core/commands/xen/lsxen.c:81 grub-core/commands/xen/lsxen.c:83 msgid "List Xen storage." msgstr "列出 Xen 存储。" #. TRANSLATORS: GRUBUUID stands for "filesystem #. UUID as used in GRUB". #: grub-core/commands/xnu_uuid.c:110 msgid "[-l] GRUBUUID [VARNAME]" msgstr "[-l] GRUBUUID [变量名]" #: grub-core/commands/xnu_uuid.c:111 msgid "Transform 64-bit UUID to format suitable for XNU. If -l is given keep it lowercase as done by blkid." msgstr "将 64 位的 UUID 转换成 XNU 的格式。如果指定了 -l，则像 blkid 那样保持字母小写。" # grub_error 不支持更改参数顺序。 #: grub-core/disk/arc/arcdisk.c:248 grub-core/disk/efi/efidisk.c:613 #: grub-core/disk/i386/pc/biosdisk.c:494 grub-core/disk/i386/pc/biosdisk.c:539 #: grub-core/disk/ieee1275/nand.c:198 grub-core/disk/ieee1275/obdisk.c:527 #: grub-core/disk/ieee1275/ofdisk.c:582 #, c-format msgid "failure reading sector 0x%llx from `%s'" msgstr "读取扇区 0x%llx（从 %s）失败" # grub_error 不支持更改参数顺序。 #: grub-core/disk/arc/arcdisk.c:284 grub-core/disk/efi/efidisk.c:636 #: grub-core/disk/i386/pc/biosdisk.c:544 grub-core/disk/ieee1275/ofdisk.c:602 #, c-format msgid "failure writing sector 0x%llx to `%s'" msgstr "写入扇区 0x%llx（到 %s）失败" #: grub-core/disk/cryptodisk.c:52 msgid "Mount by UUID." msgstr "按 UUID 挂载。" #. TRANSLATORS: It's still restricted to cryptodisks only. #: grub-core/disk/cryptodisk.c:54 msgid "Mount all." msgstr "挂载全部。" #: grub-core/disk/cryptodisk.c:55 msgid "Mount all volumes with `boot' flag set." msgstr "挂载所有设置了 \"boot\"（引导）标志的卷。" #: grub-core/disk/cryptodisk.c:56 msgid "Password to open volumes." msgstr "打开卷需要的密码。" #: grub-core/disk/cryptodisk.c:57 msgid "Key file" msgstr "密钥文件" #: grub-core/disk/cryptodisk.c:58 msgid "Key file offset (bytes)" msgstr "密钥文件偏移量（字节）" #: grub-core/disk/cryptodisk.c:59 msgid "Key file data size (bytes)" msgstr "密钥文件数据大小（字节）" #: grub-core/disk/cryptodisk.c:60 msgid "Read header from file" msgstr "从文件读取头" #. TRANSLATORS: The first %s is the file being looked at, the second %s is #. the error message. #: grub-core/disk/cryptodisk.c:730 grub-core/kern/emu/hostdisk.c:152 #: grub-core/kern/emu/hostdisk.c:262 grub-core/kern/emu/hostdisk.c:434 #: grub-core/kern/emu/misc.c:184 grub-core/kern/emu/misc.c:190 #: grub-core/kern/emu/misc.c:212 grub-core/osdep/bsd/getroot.c:92 #: grub-core/osdep/bsd/getroot.c:168 grub-core/osdep/hurd/getroot.c:68 #: grub-core/osdep/linux/blocklist.c:65 grub-core/osdep/linux/getroot.c:147 #: grub-core/osdep/linux/hostdisk.c:152 grub-core/osdep/linux/hostdisk.c:383 #: grub-core/osdep/linux/ofpath.c:417 grub-core/osdep/linux/ofpath.c:422 #: grub-core/osdep/linux/ofpath.c:517 grub-core/osdep/linux/ofpath.c:530 #: grub-core/osdep/sun/getroot.c:110 grub-core/osdep/windows/blocklist.c:98 #: grub-core/tests/video_checksum.c:279 util/editenv.c:54 util/glue-efi.c:125 #: util/glue-efi.c:130 util/glue-efi.c:140 util/grub-editenv.c:139 #: util/grub-editenv.c:198 util/grub-file.c:83 util/grub-fstest.c:128 #: util/grub-fstest.c:574 util/grub-install-common.c:92 #: util/grub-install-common.c:94 util/grub-install-common.c:101 #: util/grub-install-common.c:699 util/grub-menulst2cfg.c:53 #: util/grub-menulst2cfg.c:68 util/grub-mkimage.c:307 util/grub-mklayout.c:504 #: util/grub-mklayout.c:516 util/grub-mknetdir.c:134 util/grub-mknetdir.c:152 #: util/grub-mkrescue.c:651 util/grub-mkrescue.c:655 util/grub-mkrescue.c:922 #: util/grub-mkrescue.c:926 util/grub-mkstandalone.c:253 util/grub-mount.c:517 #: util/grub-render-label.c:169 util/grub-script-check.c:175 #: util/grub-syslinux2cfg.c:181 util/grub-syslinux2cfg.c:191 #: util/grub-syslinux2cfg.c:212 util/grub-syslinux2cfg.c:228 util/misc.c:91 #: util/render-label.c:76 util/render-label.c:163 util/render-label.c:174 #: util/resolve.c:249 util/setup.c:786 #, c-format msgid "cannot open `%s': %s" msgstr "无法打开 \"%s\"：%s" #: grub-core/disk/cryptodisk.c:740 #, c-format msgid "failed to query size of device `%s': %s" msgstr "无法查询设备 \"%s\" 的大小：%s" #: grub-core/disk/cryptodisk.c:802 grub-core/disk/cryptodisk.c:846 #: grub-core/kern/emu/hostdisk.c:270 grub-core/kern/emu/hostfs.c:142 #: grub-core/osdep/linux/hostdisk.c:418 util/grub-editenv.c:144 #: util/grub-editenv.c:155 util/grub-fstest.c:326 util/misc.c:111 #, c-format msgid "cannot seek `%s': %s" msgstr "无法 seek \"%s\"：%s" #: grub-core/disk/cryptodisk.c:1039 msgid "header file not found" msgstr "头文件未找到" #: grub-core/disk/cryptodisk.c:1049 msgid "header file too small" msgstr "头文件太小" #: grub-core/disk/cryptodisk.c:1122 #, c-format msgid "Enter passphrase for %s%s%s (%s): " msgstr "输入 %s%s%s (%s) 的密码：" #: grub-core/disk/cryptodisk.c:1124 grub-core/disk/plainmount.c:374 msgid "UNKNOWN" msgstr "未知" #: grub-core/disk/cryptodisk.c:1292 #, c-format msgid "non-numeric or invalid keyfile offset `%s'" msgstr "密钥文件偏移量 \"%s\" 不是数字或者无效" #: grub-core/disk/cryptodisk.c:1303 #, c-format msgid "non-numeric or invalid keyfile size `%s'" msgstr "密钥文件大小 \"%s\" 不是数字或者无效" #: grub-core/disk/cryptodisk.c:1307 msgid "key file size is 0" msgstr "密钥文件大小为 0" #: grub-core/disk/cryptodisk.c:1311 #, c-format msgid "key file size exceeds maximum (%d)" msgstr "密钥文件大小超过最大值（%d）" #: grub-core/disk/cryptodisk.c:1322 msgid "Keyfile offset, %llu, is greater thankeyfile size, %" msgstr "密钥文件偏移量 %llu 大于密钥文件大小 %" #: grub-core/disk/cryptodisk.c:1333 msgid "keyfile is too small: requested %llu bytes, but the file only has %" msgstr "密钥文件太小：请求了 %llu 字节，但文件只有 %" #: grub-core/disk/cryptodisk.c:1350 msgid "failed to read key file" msgstr "读取密钥文件失败" #: grub-core/disk/cryptodisk.c:1357 msgid "cannot use UUID lookup with detached header" msgstr "无法对分离头使用 UUID 查找" #: grub-core/disk/cryptodisk.c:1577 msgid "[ [-p password] | [-k keyfile [-O keyoffset] [-S keysize] ] ] [-H file] " msgstr "[ [-p 密码] | [-k 密钥文件 [-O 密钥偏移量] [-S 密钥大小] ] ] [-H 文件] <源|-u UUID|-a|-b>" #: grub-core/disk/cryptodisk.c:1580 msgid "Mount a crypto device." msgstr "挂载一个加密设备。" #. TRANSLATORS: This message kicks in during the detection of #. which modules needs to be included in core image. This happens #. in the case of degraded RAID and means that autodetection may #. fail to include some of modules. It's an installation time #. message, not runtime message. #. #. TRANSLATORS: This message kicks in during the detection of #. which modules needs to be included in core image. This happens #. in the case of degraded RAID and means that autodetection may #. fail to include some of modules. It's an installation time #. message, not runtime message. #: grub-core/disk/diskfilter.c:351 grub-core/disk/diskfilter.c:403 #, c-format msgid "Couldn't find physical volume `%s'. Some modules may be missing from core image." msgstr "无法找到物理卷 \"%s\"。核心镜像中可能缺少某些模块。" #: grub-core/disk/diskfilter.c:507 #, c-format msgid "physical volume %s not found" msgstr "物理卷 %s 未找到" #: grub-core/disk/efi/efidisk.c:610 grub-core/disk/efi/efidisk.c:633 #, c-format msgid "no media in `%s'" msgstr "\"%s\" 中没有介质" #: grub-core/disk/geli.c:75 msgid "Couldn't load sha256" msgstr "无法加载 sha256" #: grub-core/disk/geli.c:85 msgid "Couldn't load sha512" msgstr "无法加载 sha512" #: grub-core/disk/geli.c:214 grub-core/disk/geli.c:218 msgid "couldn't read ELI metadata" msgstr "无法读取 ELI 元数据" #: grub-core/disk/geli.c:229 msgid "wrong ELI magic or version" msgstr "错误的 ELI 魔数或版本" #: grub-core/disk/geli.c:435 grub-core/disk/luks.c:158 msgid "Attempting to decrypt master key..." msgstr "尝试解密主密钥..." #. TRANSLATORS: It's a cryptographic key slot: one element of an array #. where each element is either empty or holds a key. #: grub-core/disk/geli.c:519 grub-core/disk/luks.c:267 #, c-format msgid "Slot %d opened\n" msgstr "槽 %d 已打开\n" #: grub-core/disk/i386/pc/biosdisk.c:466 grub-core/disk/i386/pc/biosdisk.c:520 #: grub-core/disk/i386/pc/biosdisk.c:530 grub-core/kern/disk_common.c:48 #, c-format msgid "attempt to read or write outside of disk `%s'" msgstr "尝试在磁盘 \"%s\" 之外进行读取或写入操作" #: grub-core/disk/i386/pc/biosdisk.c:487 grub-core/disk/i386/pc/biosdisk.c:607 #: grub-core/disk/scsi.c:724 msgid "cannot write to CD-ROM" msgstr "无法写入 CD-ROM" #: grub-core/disk/i386/pc/biosdisk.c:658 msgid "Native disk drivers are in use. Refusing to use firmware disk interface." msgstr "正在使用原生磁盘驱动程序。拒绝使用固件磁盘接口。" #. TRANSLATORS: it's a partition for embedding, #. not a partition embed into something. GRUB #. install tools put core.img into a place #. usable for bootloaders (called generically #. "embedding zone") and this operation is #. called "embedding". #: grub-core/disk/ldm.c:1074 msgid "your LDM Embedding Partition is too small; embedding won't be possible" msgstr "您的 LDM 嵌入分区太小；无法进行嵌入" #. TRANSLATORS: it's a partition for embedding, #. not a partition embed into something. #: grub-core/disk/ldm.c:1092 msgid "this LDM has no Embedding Partition; embedding won't be possible" msgstr "此 LDM 没有嵌入分区；无法进行嵌入" #. TRANSLATORS: The disk is simply removed from the list of available ones, #. not wiped, avoid to scare user. #: grub-core/disk/loopback.c:45 msgid "Delete the specified loopback drive." msgstr "删除指定的回环设备项。" #: grub-core/disk/loopback.c:46 msgid "Transparently decompress backing file." msgstr "透明地解压回环设备对应的文件。" #: grub-core/disk/loopback.c:233 msgid "[-d] [-D] DEVICENAME FILE." msgstr "[-d] [-D] 设备名 文件。" #. TRANSLATORS: The file itself is not destroyed #. or transformed into drive. #: grub-core/disk/loopback.c:236 msgid "Make a virtual drive from a file." msgstr "根据文件内容创建虚拟驱动器。" #: grub-core/disk/luks2.c:388 msgid "could not unescape Base64 string" msgstr "无法取消转义 Base64 字符串" #: grub-core/disk/luks2.c:393 msgid "could not decode Base64 string" msgstr "无法解码 Base64 字符串" #. TRANSLATORS: It's a cryptographic key slot: one element of an array #. where each element is either empty or holds a key. #. #: grub-core/disk/luks2.c:754 #, c-format msgid "Slot \"%s\" opened\n" msgstr "槽 \"%s\" 已打开\n" #. TRANSLATORS: It's still restricted to this module only. #: grub-core/disk/plainmount.c:49 msgid "Password hash" msgstr "密码哈希" #: grub-core/disk/plainmount.c:50 msgid "Password cipher" msgstr "密码串" #: grub-core/disk/plainmount.c:51 msgid "Key size (in bits)" msgstr "密钥大小（比特）" #: grub-core/disk/plainmount.c:52 msgid "Device sector size" msgstr "设备扇区大小" #: grub-core/disk/plainmount.c:53 msgid "Password (key)" msgstr "密码（密钥）" #: grub-core/disk/plainmount.c:54 msgid "Keyfile path" msgstr "密钥文件路径" #: grub-core/disk/plainmount.c:55 msgid "Keyfile offset" msgstr "密钥文件偏移量" #: grub-core/disk/plainmount.c:56 msgid "Set device UUID" msgstr "设置设备 UUID" #: grub-core/disk/plainmount.c:69 msgid "cannot set specified key" msgstr "无法设置指定的密钥" #: grub-core/disk/plainmount.c:102 #, c-format msgid "cannot determine disk %s size" msgstr "无法确定磁盘 %s 的大小" #: grub-core/disk/plainmount.c:112 #, c-format msgid "cannot set specified sector size on disk %s" msgstr "无法对磁盘 %s 设置指定的扇区大小" #: grub-core/disk/plainmount.c:188 #, c-format msgid "cannot open keyfile %s" msgstr "无法打开密钥文件 %s" #: grub-core/disk/plainmount.c:193 msgid "cannot seek keyfile at offset %" msgstr "无法 seek 至密钥文件的偏移量 %" #: grub-core/disk/plainmount.c:197 msgid "Specified key size (%" msgstr "指定的密钥大小 (%" #: grub-core/disk/plainmount.c:203 msgid "error reading key file" msgstr "读取密钥文件失败" #: grub-core/disk/plainmount.c:222 msgid "device name required" msgstr "需要设备名" #: grub-core/disk/plainmount.c:235 #, c-format msgid "couldn't load hash %s" msgstr "无法加载哈希 %s" #: grub-core/disk/plainmount.c:240 msgid "hash length %" msgstr "哈希长度 %" #: grub-core/disk/plainmount.c:248 msgid "invalid cipher mode, must be of format cipher-mode" msgstr "无效的密码模式，格式必须为 密码-模式" #: grub-core/disk/plainmount.c:254 msgid "password exceeds maximium size" msgstr "密码超过最大大小" #: grub-core/disk/plainmount.c:260 msgid "specified UUID exceeds maximum size" msgstr "指定的 UUID 超过最大大小" #: grub-core/disk/plainmount.c:262 msgid "specified UUID too short" msgstr "指定的 UUID 太短" #: grub-core/disk/plainmount.c:271 msgid "unrecognized keyfile offset" msgstr "无法识别的密钥文件偏移量" #: grub-core/disk/plainmount.c:278 msgid "unrecognized sector size" msgstr "无法识别的扇区大小" #: grub-core/disk/plainmount.c:284 msgid "unrecognized key size" msgstr "无法识别的密钥大小" #: grub-core/disk/plainmount.c:287 #, c-format msgid "key size is not multiple of %d bits" msgstr "密钥大小不是 %d 比特的整数倍" #: grub-core/disk/plainmount.c:291 msgid "key size %" msgstr "密钥大小 %" #: grub-core/disk/plainmount.c:298 #, c-format msgid "sector size -S must be at least %d" msgstr "扇区大小 -S 必须至少为 %d" #: grub-core/disk/plainmount.c:302 msgid "sector size -S %" msgstr "扇区大小 -S %" #: grub-core/disk/plainmount.c:341 #, c-format msgid "invalid cipher %s" msgstr "无效的密码 %s" #: grub-core/disk/plainmount.c:343 #, c-format msgid "invalid mode %s" msgstr "无效的模式 %s" #: grub-core/disk/plainmount.c:345 #, c-format msgid "invalid cipher %s or mode %s" msgstr "无效的密码 %s 或模式 %s" #: grub-core/disk/plainmount.c:364 #, c-format msgid "cannot open disk %s" msgstr "无法打开磁盘 %s" #: grub-core/disk/plainmount.c:372 #, c-format msgid "Enter passphrase for %s%s%s: " msgstr "输入 %s%s%s 的密码：" #: grub-core/disk/plainmount.c:379 msgid "error reading password" msgstr "读取密码时出错" #: grub-core/disk/plainmount.c:391 msgid "warning: hash is ignored if keyfile is specified\n" msgstr "警告：指定密钥文件时将忽略哈希\n" #: grub-core/disk/plainmount.c:395 msgid "warning: password specified with -p option is ignored if keyfile is provided\n" msgstr "警告：指定密钥文件时将忽略用 -p 选项指定的密码\n" #: grub-core/disk/plainmount.c:400 msgid "warning: keyfile offset option -O specified without keyfile option -d\n" msgstr "警告：指定了密钥文件偏移量 -O，但未指定密钥文件 -d\n" #: grub-core/disk/plainmount.c:448 msgid "-c cipher -s key-size [-h hash] [-S sector-size] [-o offset] [-p password] [-u uuid] [[-d keyfile] [-O keyfile offset]] " msgstr "-c 密码 -s 密钥大小 [-h 哈希] [-S 扇区大小] [-o 偏移量] [-p 密码] [-u uuid] [[-d 密钥文件] [-O 密钥文件偏移量]] <源>" #: grub-core/disk/plainmount.c:451 msgid "Open partition encrypted in plain mode." msgstr "打开以普通模式加密的分区。" #: grub-core/efiemu/i386/loadcore32.c:111 grub-core/kern/arm/dl.c:256 #: grub-core/kern/i386/dl.c:75 grub-core/kern/mips/dl.c:258 #: grub-core/kern/powerpc/dl.c:163 util/grub-mkimagexx.c:757 #: util/grub-mkimagexx.c:884 util/grub-mkimagexx.c:948 #: util/grub-mkimagexx.c:1029 util/grub-mkimagexx.c:1123 #: util/grub-mkimagexx.c:1188 util/grub-mkimagexx.c:1290 #: util/grub-mkimagexx.c:1482 util/grub-mkimagexx.c:1697 #: util/grub-mkimagexx.c:1735 util/grub-mkimagexx.c:1793 #: util/grub-mkimagexx.c:1825 util/grub-mkimagexx.c:1896 #: util/grub-mkimagexx.c:1926 #, c-format msgid "relocation 0x%x is not implemented yet" msgstr "重定位 0x%x 尚未实现" #: grub-core/efiemu/i386/loadcore64.c:130 grub-core/kern/arm64/dl.c:192 #: grub-core/kern/ia64/dl.c:145 grub-core/kern/loongarch64/dl.c:144 #: grub-core/kern/riscv/dl.c:340 grub-core/kern/sparc64/dl.c:185 #: grub-core/kern/x86_64/dl.c:115 #, c-format msgid "relocation 0x%s is not implemented yet" msgstr "重定位 0x%s 尚未实现" #: grub-core/efiemu/loadcore.c:200 grub-core/efiemu/loadcore.c:237 #: grub-core/loader/i386/bsdXX.c:335 util/grub-mkimagexx.c:2487 msgid "no symbol table" msgstr "没有符号表" #: grub-core/efiemu/loadcore.c:346 grub-core/kern/dl.c:629 #: grub-core/loader/ia64/efi/linux.c:345 grub-core/loader/mips/linux.c:248 #: grub-core/loader/multiboot_elfxx.c:89 #: grub-core/loader/powerpc/ieee1275/linux.c:266 #: grub-core/loader/sparc64/ieee1275/linux.c:320 msgid "this ELF file is not of the right type" msgstr "该 ELF 文件类型不正确" #: grub-core/efiemu/main.c:313 msgid "Load and initialize EFI emulator." msgstr "加载并初始化 EFI 模拟器。" #: grub-core/efiemu/main.c:317 msgid "Finalize loading of EFI emulator." msgstr "完成加载 EFI 模拟器。" #: grub-core/efiemu/main.c:320 msgid "Unload EFI emulator." msgstr "卸载 EFI 模拟器。" #: grub-core/efiemu/symbols.c:92 grub-core/kern/dl.c:379 #, c-format msgid "symbol `%s' not found" msgstr "符号 \"%s\" 未找到" #: grub-core/font/font_cmd.c:52 msgid "Loaded fonts:" msgstr "已加载的字体：" #: grub-core/font/font_cmd.c:74 msgid "FILE..." msgstr "文件..." #: grub-core/font/font_cmd.c:75 msgid "Specify one or more font files to load." msgstr "指定一个或多个要加载的字体。" #: grub-core/font/font_cmd.c:78 msgid "List the loaded fonts." msgstr "列出已加载的字体。" #: grub-core/fs/archelp.c:216 grub-core/fs/archelp.c:278 #: grub-core/fs/btrfs.c:1944 grub-core/fs/fshelp.c:227 grub-core/fs/jfs.c:747 #: grub-core/fs/minix.c:371 grub-core/fs/ufs.c:454 msgid "too deep nesting of symlinks" msgstr "符号链接嵌套层数过多" #: grub-core/fs/bfs.c:228 grub-core/fs/fshelp.c:380 grub-core/fs/minix.c:272 #: grub-core/kern/file.c:161 msgid "attempt to read past the end of file" msgstr "尝试越过文件结束位置进行读取" #: grub-core/fs/btrfs.c:1827 grub-core/fs/btrfs.c:2092 #: grub-core/fs/fshelp.c:189 grub-core/fs/fshelp.c:309 grub-core/fs/jfs.c:442 #: grub-core/fs/minix.c:418 grub-core/fs/minix.c:580 #: grub-core/fs/reiserfs.c:732 grub-core/fs/ufs.c:531 grub-core/fs/ufs.c:671 #: grub-core/fs/zfs/zfs.c:2844 grub-core/fs/zfs/zfs.c:4290 msgid "not a directory" msgstr "不是目录" #: grub-core/fs/btrfs.c:2223 grub-core/fs/fshelp.c:307 grub-core/fs/jfs.c:846 #: grub-core/fs/zfs/zfs.c:3835 msgid "not a regular file" msgstr "不是普通文件" #: grub-core/fs/btrfs.c:2373 grub-core/fs/zfs/zfs.c:4376 #: grub-core/partmap/msdos.c:404 msgid "your core.img is unusually large. It won't fit in the embedding area" msgstr "您的 core.img 过大，无法装入嵌入区域" #: grub-core/fs/ext2.c:750 grub-core/fs/squash4.c:467 #: grub-core/kern/buffer.c:111 grub-core/kern/misc.c:420 #: grub-core/kern/misc.c:478 grub-core/kern/mm.c:568 grub-core/lib/arg.c:224 #: grub-core/lib/arg.c:471 grub-core/loader/i386/pc/linux.c:225 #: grub-core/loader/linux.c:152 grub-core/loader/linux.c:261 #: grub-core/script/lexer.c:179 grub-core/video/bitmap.c:145 #: grub-core/video/readers/png.c:327 grub-core/video/readers/png.c:332 #: include/grub/buffer.h:79 include/grub/buffer.h:117 include/grub/misc.h:318 #: include/grub/misc.h:327 msgid "overflow is detected" msgstr "检测到溢出" #: grub-core/fs/fshelp.c:281 grub-core/fs/minix.c:648 grub-core/fs/ufs.c:661 #: grub-core/fs/ufs.c:757 grub-core/kern/fs.c:172 grub-core/kern/fs.c:188 #, c-format msgid "invalid file name `%s'" msgstr "无效的文件名 \"%s\"" #: grub-core/fs/fshelp.c:373 msgid "blocksize too large" msgstr "块大小过大" #: grub-core/fs/zfs/zfs.c:457 msgid "checksum verification failed" msgstr "校验和验证失败" #: grub-core/fs/zfs/zfs.c:1472 msgid "couldn't find a necessary member device of multi-device filesystem" msgstr "无法在多设备文件系统中找到某个必需的成员设备" #: grub-core/fs/zfs/zfscrypt.c:297 msgid "no decryption key available" msgstr "没有可用的解密密钥" #: grub-core/fs/zfs/zfscrypt.c:309 msgid "MAC verification failed" msgstr "MAC 验证失败" #: grub-core/fs/zfs/zfscrypt.c:418 msgid "Assume input is raw." msgstr "假定输入是原始数据。" #: grub-core/fs/zfs/zfscrypt.c:419 msgid "Assume input is hex." msgstr "假定输入是十六进制数据。" #: grub-core/fs/zfs/zfscrypt.c:420 msgid "Assume input is passphrase." msgstr "假定输入是密码。" #: grub-core/fs/zfs/zfscrypt.c:442 util/grub-fstest.c:559 #: util/grub-mount.c:502 msgid "Enter ZFS password: " msgstr "输入 ZFS 密码：" #: grub-core/fs/zfs/zfscrypt.c:481 msgid "[-h|-p|-r] [FILE]" msgstr "[-h|-p|-r] [文件]" #: grub-core/fs/zfs/zfscrypt.c:482 msgid "Import ZFS wrapping key stored in FILE." msgstr "导入 <文件> 中存储的 ZFS wrapping key。" #: grub-core/fs/zfs/zfsinfo.c:51 msgid "Virtual device is removed" msgstr "虚拟设备已移除" #: grub-core/fs/zfs/zfsinfo.c:57 msgid "Virtual device is faulted" msgstr "虚拟设备有故障" #: grub-core/fs/zfs/zfsinfo.c:63 msgid "Virtual device is offline" msgstr "虚拟设备已离线" #. TRANSLATORS: degraded doesn't mean broken but that some of #. component are missing but virtual device as whole is still usable. #: grub-core/fs/zfs/zfsinfo.c:70 msgid "Virtual device is degraded" msgstr "虚拟设备已降级" #: grub-core/fs/zfs/zfsinfo.c:73 msgid "Virtual device is online" msgstr "虚拟设备已在线" #: grub-core/fs/zfs/zfsinfo.c:89 msgid "Incorrect virtual device: no type available" msgstr "虚拟设备不正确：无可用类型" #. TRANSLATORS: The virtual devices form a tree (in graph-theoretical #. sense). The nodes like mirror or raidz have children: member devices. #. The "real" devices which actually store data are called "leafs" #. (again borrowed from graph theory) and can be either disks #. (or partitions) or files. #: grub-core/fs/zfs/zfsinfo.c:105 msgid "Leaf virtual device (file or disk)" msgstr "叶虚拟设备（文件或磁盘）" #: grub-core/fs/zfs/zfsinfo.c:113 msgid "Bootpath: unavailable\n" msgstr "引导路径：不可用\n" #: grub-core/fs/zfs/zfsinfo.c:115 #, c-format msgid "Bootpath: %s\n" msgstr "引导路径：%s\n" #: grub-core/fs/zfs/zfsinfo.c:120 msgid "Path: unavailable" msgstr "路径：不可用" #: grub-core/fs/zfs/zfsinfo.c:122 #, c-format msgid "Path: %s\n" msgstr "路径：%s\n" #: grub-core/fs/zfs/zfsinfo.c:127 msgid "Devid: unavailable" msgstr "设备 ID：不可用" #: grub-core/fs/zfs/zfsinfo.c:129 #, c-format msgid "Devid: %s\n" msgstr "设备 ID：%s\n" #: grub-core/fs/zfs/zfsinfo.c:148 msgid "This VDEV is a mirror" msgstr "此 VDEV 是一个镜像" #: grub-core/fs/zfs/zfsinfo.c:153 #, c-format msgid "This VDEV is a RAIDZ%llu\n" msgstr "此 VDEV 是一个 RAIDZ%llu\n" #: grub-core/fs/zfs/zfsinfo.c:158 msgid "Incorrect VDEV" msgstr "不正确的 VDEV" #: grub-core/fs/zfs/zfsinfo.c:161 #, c-format msgid "VDEV with %d children\n" msgstr "VDEV 有 %d 个子设备\n" #. TRANSLATORS: it's the element carying the number %d, not #. total element number. And the number itself is fine, #. only the element isn't. #. #: grub-core/fs/zfs/zfsinfo.c:177 #, c-format msgid "VDEV element number %d isn't correct\n" msgstr "VDEV 单元编号 %d 不正确\n" #. TRANSLATORS: it's the element carying the number %d, not #. total element number. This is used in enumeration #. "Element number 1", "Element number 2", ... #: grub-core/fs/zfs/zfsinfo.c:184 #, c-format msgid "VDEV element number %d:\n" msgstr "VDEV 单元编号 %d ：\n" #: grub-core/fs/zfs/zfsinfo.c:193 #, c-format msgid "Unknown virtual device type: %s\n" msgstr "未知的虚拟设备类型：%s\n" #. TRANSLATORS: Here we speak about ZFS pools it's semi-marketing, #. semi-technical term by Sun/Oracle and should be translated in sync with #. other ZFS-related software and documentation. #: grub-core/fs/zfs/zfsinfo.c:254 msgid "Pool state: active" msgstr "存储池状态：活动" #: grub-core/fs/zfs/zfsinfo.c:255 msgid "Pool state: exported" msgstr "存储池状态：已导出" #: grub-core/fs/zfs/zfsinfo.c:256 msgid "Pool state: destroyed" msgstr "存储池状态：已销毁" #: grub-core/fs/zfs/zfsinfo.c:257 msgid "Pool state: reserved for hot spare" msgstr "存储池状态：保留，用于热备份" #: grub-core/fs/zfs/zfsinfo.c:258 msgid "Pool state: level 2 ARC device" msgstr "存储池状态：级别 2 的 ARC 设备" #: grub-core/fs/zfs/zfsinfo.c:259 msgid "Pool state: uninitialized" msgstr "存储池状态：未初始化" #: grub-core/fs/zfs/zfsinfo.c:260 msgid "Pool state: unavailable" msgstr "存储池状态：不可用" #: grub-core/fs/zfs/zfsinfo.c:261 msgid "Pool state: potentially active" msgstr "存储池状态：可能活动" #: grub-core/fs/zfs/zfsinfo.c:306 msgid "Pool name: unavailable" msgstr "存储池名称：不可用" #: grub-core/fs/zfs/zfsinfo.c:308 #, c-format msgid "Pool name: %s\n" msgstr "存储池名称：%s\n" #: grub-core/fs/zfs/zfsinfo.c:313 msgid "Pool GUID: unavailable" msgstr "存储池 GUID：不可用" #: grub-core/fs/zfs/zfsinfo.c:315 #, c-format msgid "Pool GUID: %016llx\n" msgstr "存储池 GUID：%016llx\n" #: grub-core/fs/zfs/zfsinfo.c:320 msgid "Unable to retrieve pool state" msgstr "无法获取存储池状态" #: grub-core/fs/zfs/zfsinfo.c:322 msgid "Unrecognized pool state" msgstr "无法识别存储池状态" #. TRANSLATORS: There are undetermined number of virtual devices #. in a device tree, not just one. #. #: grub-core/fs/zfs/zfsinfo.c:332 msgid "No virtual device tree available" msgstr "没有可用的虚拟设备树" #: grub-core/fs/zfs/zfsinfo.c:431 msgid "Print ZFS info about DEVICE." msgstr "输出 <设备> 的 ZFS 信息。" #: grub-core/fs/zfs/zfsinfo.c:433 msgid "FILESYSTEM [VARIABLE]" msgstr "文件系统 [变量]" #: grub-core/fs/zfs/zfsinfo.c:434 msgid "Print ZFS-BOOTFSOBJ or store it into VARIABLE" msgstr "输出 ZFS-BOOTFSOBJ，或者将其存储到 <变量>" #. TRANSLATORS: at this position GRUB waits for the user to do an action #. in remote debugger, namely to tell it to establish connection. #: grub-core/gdb/gdb.c:48 msgid "Now connect the remote debugger, please." msgstr "现在请连接远程调试工具。" #. TRANSLATORS: GDB stub is a small part of #. GDB functionality running on local host #. which allows remote debugger to #. connect to it. #. #: grub-core/gdb/gdb.c:86 msgid "Start GDB stub on given port" msgstr "在给定端口上启动 GDB stub" #. TRANSLATORS: this refers to triggering #. a breakpoint so that the user will land #. into GDB. #. #: grub-core/gdb/gdb.c:93 msgid "Break into GDB" msgstr "触发断点并启动 GDB" #: grub-core/gdb/gdb.c:95 msgid "Stop GDB stub" msgstr "停止 GDB stub" #: grub-core/gettext/gettext.c:85 msgid "premature end of file" msgstr "文件过早结束" #. TRANSLATORS: It refers to passing the string through gettext. #. So it's "translate" in the same meaning as in what you're #. doing now. #. #: grub-core/gettext/gettext.c:525 msgid "Translates the string with the current settings." msgstr "使用当前设置翻译字符串。" #: grub-core/gfxmenu/gui_label.c:186 grub-core/normal/menu_text.c:184 msgid "Press enter to boot the selected OS, `e' to edit the commands before booting or `c' for a command-line. ESC to return previous menu." msgstr "按 enter 引导选定的操作系统，按 e 在引导之前编辑命令，按 c 进入命令行。按 ESC 返回上一级菜单。" #: grub-core/gfxmenu/gui_label.c:190 grub-core/normal/menu_text.c:192 msgid "Press enter to boot the selected OS, `e' to edit the commands before booting or `c' for a command-line." msgstr "按 enter 引导选定的操作系统，按 e 在引导之前编辑命令，按 c 进入命令行。" #: grub-core/gfxmenu/gui_label.c:194 msgid "enter: boot, `e': options, `c': cmd-line" msgstr "enter: 引导、\"e\": 选项、\"c\": 命令行" #: grub-core/gfxmenu/gui_progress_bar.c:339 grub-core/normal/menu_text.c:446 #, c-format msgid "The highlighted entry will be executed automatically in %ds." msgstr "高亮显示的启动项将在 %d 秒后自动执行。" #. TRANSLATORS: 's' stands for seconds. #. It's a standalone timeout notification. #. Please use the short form in your language. #: grub-core/gfxmenu/gui_progress_bar.c:344 #, c-format msgid "%ds remaining." msgstr "剩余 %d 秒。" #. TRANSLATORS: 's' stands for seconds. #. It's a standalone timeout notification. #. Please use the shortest form available in you language. #: grub-core/gfxmenu/gui_progress_bar.c:349 grub-core/normal/menu_text.c:444 #: grub-core/normal/menu_text.c:462 #, c-format msgid "%ds" msgstr "%d 秒" #: grub-core/gfxmenu/view.c:103 msgid "GRUB Boot Menu" msgstr "GRUB 引导菜单" #: grub-core/hello/hello.c:36 msgid "Hello World" msgstr "Hello World" #: grub-core/hello/hello.c:45 msgid "Say `Hello World'." msgstr "显示 \"Hello World\"。" #: grub-core/io/gzio.c:409 grub-core/kern/file.c:215 msgid "attempt to seek outside of the file" msgstr "尝试 seek 到文件范围之外" #. TRANSLATORS: It's about given file having some strange format, not #. complete lack of gzip support. #: grub-core/io/gzio.c:1265 grub-core/io/gzio.c:1274 grub-core/io/gzio.c:1281 msgid "unsupported gzip format" msgstr "不支持的 gzip 格式" #: grub-core/io/lzopio.c:507 msgid "lzop file corrupted" msgstr "lzop 文件已损坏" #: grub-core/io/xzio.c:278 msgid "xz file corrupted or unsupported block options" msgstr "xz 文件已损坏，或使用了不支持的块选项" #: grub-core/kern/arm/dl.c:277 grub-core/kern/arm64/dl.c:44 #: grub-core/kern/i386/dl.c:36 grub-core/kern/ia64/dl.c:41 #: grub-core/kern/loongarch64/dl.c:37 grub-core/kern/mips/dl.c:48 #: grub-core/kern/powerpc/dl.c:36 grub-core/kern/riscv/dl.c:47 #: grub-core/kern/sparc64/dl.c:36 grub-core/kern/x86_64/dl.c:36 #: grub-core/loader/i386/bsd.c:1451 grub-core/loader/i386/bsdXX.c:52 #: grub-core/loader/ia64/efi/linux.c:341 grub-core/loader/mips/linux.c:298 #: grub-core/loader/multiboot.c:232 grub-core/loader/multiboot_elfxx.c:86 #: grub-core/loader/powerpc/ieee1275/linux.c:280 #: grub-core/loader/sparc64/ieee1275/linux.c:331 msgid "invalid arch-dependent ELF magic" msgstr "无效的架构相关的 ELF 魔数" #: grub-core/kern/buffer.c:74 msgid "requested buffer size is too large" msgstr "请求的缓冲区大小过大" #: grub-core/kern/buffer.c:115 msgid "new read is position beyond the end of the written data" msgstr "新的读取的位置超出了已写入数据的末尾" #: grub-core/kern/corecmd.c:181 msgid "[ENVVAR=VALUE]" msgstr "[环境变量=值]" #: grub-core/kern/corecmd.c:182 msgid "Set an environment variable." msgstr "设置一个环境变量。" #: grub-core/kern/corecmd.c:186 msgid "ENVVAR" msgstr "环境变量" #: grub-core/kern/corecmd.c:187 msgid "Remove an environment variable." msgstr "删除一个环境变量。" #: grub-core/kern/corecmd.c:189 msgid "[ARG]" msgstr "[参数]" #: grub-core/kern/corecmd.c:189 msgid "List devices or files." msgstr "列出设备或文件。" #: grub-core/kern/corecmd.c:191 msgid "Insert a module." msgstr "插入一个模块。" #: grub-core/kern/disk.c:236 grub-core/net/net.c:1522 #, c-format msgid "disk `%s' not found" msgstr "未找到磁盘 \"%s\"" #: grub-core/kern/disk_common.c:27 msgid "attempt to read or write outside of partition" msgstr "尝试在分区之外进行读取或写入操作" #: grub-core/kern/dl.c:212 grub-core/kern/elf.c:61 grub-core/kern/elf.c:79 #: grub-core/loader/i386/bsdXX.c:49 grub-core/loader/ia64/efi/linux.c:335 #: grub-core/loader/multiboot_elfxx.c:82 msgid "invalid arch-independent ELF magic" msgstr "无效的架构无关的 ELF 魔数" #: grub-core/kern/efi/debug.c:37 msgid "Print infomation useful for GDB debugging" msgstr "打印对于 GDB 调试很有用的信息" #: grub-core/kern/efi/mm.c:135 #, c-format msgid "invalid memory address (0x%s > 0x%s)" msgstr "无效的内存地址 (0x%s > 0x%s)" #: grub-core/kern/efi/sb.c:171 msgid "prohibited by secure boot policy" msgstr "被安全启动策略禁止" #: grub-core/kern/efi/sb.c:181 msgid "shim_lock protocol not found" msgstr "未找到 shim_lock 协议" #: grub-core/kern/efi/sb.c:184 msgid "bad shim signature" msgstr "无效的 shim 签名" #: grub-core/kern/elfXX.c:215 msgid "NULL pointer passed for shnum" msgstr "将空指针传递给了 shnum" #: grub-core/kern/elfXX.c:221 grub-core/kern/elfXX.c:255 #: grub-core/kern/elfXX.c:288 msgid "NULL pointer passed for elf header" msgstr "将空指针传递给了 elf 头" #: grub-core/kern/elfXX.c:227 grub-core/kern/elfXX.c:261 #: grub-core/kern/elfXX.c:294 msgid "invalid section header table offset in e_shoff" msgstr "e_shoff 中的分区头表偏移量无效" #: grub-core/kern/elfXX.c:232 msgid "invalid number of section header table entries in sh_size: %" msgstr "sh_size 中的分区头表条目编号无效：%" #: grub-core/kern/elfXX.c:237 msgid "invalid number of section header table entries in e_shnum: %" msgstr "e_shnum 中的分区头表条目编号无效：%" #: grub-core/kern/elfXX.c:249 msgid "NULL pointer passed for shstrndx" msgstr "将空指针传递给了 shstrndx" #: grub-core/kern/elfXX.c:266 #, c-format msgid "invalid section header table index in sh_link: %d" msgstr "sh_link 中的分区头表索引无效：%d" #: grub-core/kern/elfXX.c:271 #, c-format msgid "invalid section header table index in e_shstrndx: %d" msgstr "e_shstrndx 中的分区头表索引无效：%d" #: grub-core/kern/elfXX.c:282 msgid "NULL pointer passed for phnum" msgstr "将空指针传递给了 phnum" #: grub-core/kern/elfXX.c:299 #, c-format msgid "invalid number of program header table entries in sh_info: %d" msgstr "sh_info 中的程序头表条目编号无效：%d" #: grub-core/kern/elfXX.c:304 #, c-format msgid "invalid number of program header table entries in e_phnum: %d" msgstr "e_phnum 中的程序头表条目编号无效：%d" #. TRANSLATORS: it refers to the lack of free slots. #: grub-core/kern/emu/hostdisk.c:208 grub-core/kern/emu/hostdisk.c:466 msgid "device count exceeds limit" msgstr "设备计数超过限制" #: grub-core/kern/emu/hostdisk.c:342 util/editenv.c:66 util/grub-editenv.c:203 #: util/grub-fstest.c:191 util/grub-mkfont.c:841 util/misc.c:114 #: util/misc.c:129 util/setup.c:791 #, c-format msgid "cannot write to `%s': %s" msgstr "无法写入 \"%s\"：%s" #. TRANSLATORS: Only one entry is ignored. However the suggestion #. is to correct/delete the whole file. #. device.map is a file indicating which #. devices are available at boot time. Fedora populated it with #. entries like (hd0,1) /dev/sda1 which would mean that every #. partition is a separate disk for BIOS. Such entries were #. inactive in GRUB due to its bug which is now gone. Without #. this additional check these entries would be harmful now. #. #: grub-core/kern/emu/hostdisk.c:503 #, c-format msgid "the device.map entry `%s' is invalid. Ignoring it. Please correct or delete your device.map" msgstr "device.map 中的项 \"%s\" 无效。已忽略。请更正或删除您的 device.map 文件" #. TRANSLATORS: device.map is a filename. Not to be translated. #. device.map specifies disk correspondance overrides. Previously #. one could create any kind of device name with this. Due to #. some problems we decided to limit it to just a handful #. possibilities. #: grub-core/kern/emu/hostdisk.c:555 #, c-format msgid "the drive name `%s' in device.map is incorrect. Using %s instead. Please use the form [hfc]d[0-9]* (E.g. `hd0' or `cd')" msgstr "device.map 中的驱动器名 \"%s\" 不正确。已使用 \"%s\" 代替。请使用此格式：[hfc]d[0-9]*（例如 \"hd0\" 或 \"cd\"）" #: grub-core/kern/emu/hostfs.c:76 grub-core/kern/emu/hostfs.c:109 #, c-format msgid "can't open `%s': %s" msgstr "无法打开 \"%s\"：%s" #: grub-core/kern/emu/main.c:99 util/grub-fstest.c:522 util/grub-mount.c:471 msgid "DEVICE_NAME" msgstr "设备名称" #: grub-core/kern/emu/main.c:99 grub-core/loader/i386/bsd.c:137 #: grub-core/loader/i386/bsd.c:170 util/grub-fstest.c:522 #: util/grub-mount.c:471 msgid "Set root device." msgstr "设置根设备。" #. TRANSLATORS: There are many devices in device map. #: grub-core/kern/emu/main.c:102 util/grub-probe.c:733 util/grub-setup.c:85 #, c-format msgid "use FILE as the device map [default=%s]" msgstr "使用 <文件> 作为设备映射表 [默认=%s]" #. TRANSLATORS: There are many devices in device map. #: grub-core/kern/emu/main.c:105 msgid "use FILE as memdisk" msgstr "使用 <文件> 作为 memdisk" #: grub-core/kern/emu/main.c:107 util/grub-setup.c:83 #, c-format msgid "use GRUB files in the directory DIR [default=%s]" msgstr "使用 <目录> 内的 GRUB 文件 [默认=%s]" #: grub-core/kern/emu/main.c:108 include/grub/util/install.h:71 #: util/grub-editenv.c:58 util/grub-fstest.c:531 util/grub-glue-efi.c:58 #: util/grub-macbless.c:104 util/grub-mkfont.c:1008 util/grub-mkimage.c:86 #: util/grub-mklayout.c:56 util/grub-mount.c:477 util/grub-render-label.c:74 #: util/grub-script-check.c:52 util/grub-setup.c:90 #: util/grub-syslinux2cfg.c:78 msgid "print verbose messages." msgstr "显示详细信息。" #: grub-core/kern/emu/main.c:109 msgid "SECS" msgstr "秒" #: grub-core/kern/emu/main.c:109 msgid "wait until a debugger will attach" msgstr "等待，直到连接到一个调试器" #: grub-core/kern/emu/main.c:110 msgid "use kexec to boot Linux kernels via systemctl (pass twice to enable dangerous fallback to non-systemctl)." msgstr "使用 kexec 通过 systemctl 引导 Linux 内核（使用两次以允许回退到非 systemctl 模式，有危险）" #: grub-core/kern/emu/main.c:175 util/grub-macbless.c:143 #: util/grub-mkrelpath.c:61 util/grub-probe.c:875 util/grub-script-check.c:75 #: util/grub-setup.c:203 #, c-format msgid "Unknown extra argument `%s'." msgstr "未知的额外参数 \"%s\"。" #: grub-core/kern/emu/main.c:189 msgid "GRUB emulator." msgstr "GRUB 模拟器。" #: grub-core/kern/emu/main.c:217 util/grub-editenv.c:268 #: util/grub-glue-efi.c:110 util/grub-macbless.c:173 util/grub-mkfont.c:1223 #: util/grub-mkimage.c:281 util/grub-mklayout.c:494 #: util/grub-mkpasswd-pbkdf2.c:132 util/grub-mkrelpath.c:96 #: util/grub-probe.c:864 util/grub-render-label.c:152 #: util/grub-script-check.c:160 util/grub-setup.c:262 #: util/grub-syslinux2cfg.c:163 msgid "Error in parsing command line arguments\n" msgstr "解析命令行参数出错\n" #. TRANSLATORS: In this case GRUB tells user what he has to do. #: grub-core/kern/emu/main.c:252 #, c-format msgid "Run `gdb %s %d', and set ARGS.HOLD to zero.\n" msgstr "请执行 \"gdb %s %d\"，并将 ARGS.HOLD 设为 0。\n" #: grub-core/kern/emu/misc.c:49 #, c-format msgid "%s: warning:" msgstr "%s: 警告：" #: grub-core/kern/emu/misc.c:65 #, c-format msgid "%s: info:" msgstr "%s: 信息：" #: grub-core/kern/emu/misc.c:80 util/grub-fstest.c:573 util/grub-fstest.c:582 #: util/grub-mount.c:516 util/grub-mount.c:524 #, c-format msgid "%s: error:" msgstr "%s: 错误：" #: grub-core/kern/emu/misc.c:192 #, c-format msgid "file `%s' is too big" msgstr "文件 \"%s\" 过大" #: grub-core/kern/fs.c:122 msgid "unknown filesystem" msgstr "未知的文件系统" #: grub-core/kern/mips/arc/init.c:273 grub-core/kern/mips/loongson/init.c:301 msgid "Shutdown failed" msgstr "关机失败" #: grub-core/kern/mips/arc/init.c:285 msgid "Exit failed" msgstr "退出失败" #: grub-core/kern/misc.c:1342 msgid "string too long" msgstr "字符串太长" #: grub-core/kern/partition.c:51 grub-core/partmap/bsdlabel.c:108 #, c-format msgid "Discarding improperly nested partition (%s,%s,%s%d)" msgstr "丢弃不正确嵌套的分区 (%s,%s,%s%d)" #: grub-core/kern/rescue_parser.c:79 util/grub-editenv.c:298 #, c-format msgid "Unknown command `%s'.\n" msgstr "未知的命令 \"%s\"。\n" #: grub-core/kern/verifiers.c:120 #, c-format msgid "verification requested but nobody cares: %s" msgstr "请求进行验证但没有人关心结果：%s" #: grub-core/kern/verifiers.c:140 msgid "big file signature isn't implemented yet" msgstr "大文件签名尚未实现" #: grub-core/lib/arg.c:32 msgid "Display this help and exit." msgstr "显示此帮助并退出。" #: grub-core/lib/arg.c:34 msgid "Display the usage of this command and exit." msgstr "显示此命令的用法并退出。" #: grub-core/lib/arg.c:310 grub-core/lib/arg.c:382 #, c-format msgid "missing mandatory option for `%s'" msgstr "缺少 \"%s\" 必需的选项" #: grub-core/lib/arg.c:404 #, c-format msgid "the argument `%s' requires an integer" msgstr "参数 \"%s\" 需要一个整数" #: grub-core/lib/arg.c:427 #, c-format msgid "a value was assigned to the argument `%s' while it doesn't require an argument" msgstr "参数 \"%s\" 被赋了一个值，但它并不需要参数" #: grub-core/lib/backtrace.c:64 msgid "Print backtrace." msgstr "打印 backtrace 回溯信息。" #: grub-core/lib/datetime.c:27 msgid "Sunday" msgstr "星期日" #: grub-core/lib/datetime.c:28 msgid "Monday" msgstr "星期一" #: grub-core/lib/datetime.c:29 msgid "Tuesday" msgstr "星期二" #: grub-core/lib/datetime.c:30 msgid "Wednesday" msgstr "星期三" #: grub-core/lib/datetime.c:31 msgid "Thursday" msgstr "星期四" #: grub-core/lib/datetime.c:32 msgid "Friday" msgstr "星期五" #: grub-core/lib/datetime.c:33 msgid "Saturday" msgstr "星期六" #: grub-core/lib/i386/halt.c:77 msgid "GRUB doesn't know how to halt this machine yet!" msgstr "GRUB 尚不知道如何关闭此计算机！" #: grub-core/lib/json/json.c:274 msgid "output parameters are not set" msgstr "未设置输出参数" #: grub-core/lib/json/json.c:287 msgid "expected escaped character" msgstr "需要已转义的字符" #: grub-core/lib/json/json.c:333 msgid "unicode sequence too short" msgstr "unicode 序列太短" #: grub-core/lib/json/json.c:350 #, c-format msgid "unicode sequence with invalid character '%c'" msgstr "unicode 序列有非法字符 \"%c\"" #: grub-core/lib/json/json.c:366 #, c-format msgid "unrecognized escaped character '%c'" msgstr "无法识别的转义字符 \"%c\"" #: grub-core/lib/legacy_parse.c:75 msgid "Default server is ${net_default_server}" msgstr "默认服务器是 ${net_default_server}" #: grub-core/lib/legacy_parse.c:844 grub-core/video/colors.c:296 #: grub-core/video/colors.c:305 grub-core/video/colors.c:311 #: grub-core/video/colors.c:327 util/render-label.c:84 util/render-label.c:98 #, c-format msgid "invalid color specification `%s'" msgstr "无效的颜色说明符 \"%s\"" #: grub-core/lib/mips/arc/reboot.c:32 grub-core/lib/mips/loongson/reboot.c:61 msgid "Reboot failed" msgstr "重启失败" #: grub-core/lib/random.c:113 msgid "[LENGTH]" msgstr "[长度]" #: grub-core/lib/random.c:114 msgid "Hexdump random data." msgstr "以十六进制形式转储随机数据。" #: grub-core/loader/arm/linux.c:243 msgid "device tree must be supplied (see `devicetree' command)" msgstr "必须提供设备树（参见 \"devicetree\" 命令）" #: grub-core/loader/arm/linux.c:335 msgid "invalid zImage" msgstr "无效的 zImage" #: grub-core/loader/arm/linux.c:451 grub-core/loader/efi/fdt.c:151 msgid "invalid device tree" msgstr "无效的设备树" #: grub-core/loader/arm/linux.c:494 grub-core/loader/efi/linux.c:580 #: grub-core/loader/emu/linux.c:172 grub-core/loader/i386/linux.c:1145 #: grub-core/loader/i386/pc/linux.c:483 grub-core/loader/i386/xen.c:969 #: grub-core/loader/i386/xen.c:971 grub-core/loader/ia64/efi/linux.c:591 #: grub-core/loader/mips/linux.c:498 #: grub-core/loader/powerpc/ieee1275/linux.c:369 #: grub-core/loader/sparc64/ieee1275/linux.c:511 msgid "Load Linux." msgstr "加载 Linux。" #: grub-core/loader/arm/linux.c:496 grub-core/loader/efi/linux.c:582 #: grub-core/loader/emu/linux.c:174 grub-core/loader/i386/linux.c:1147 #: grub-core/loader/i386/pc/linux.c:486 grub-core/loader/i386/xen.c:973 #: grub-core/loader/ia64/efi/linux.c:594 grub-core/loader/mips/linux.c:500 #: grub-core/loader/powerpc/ieee1275/linux.c:371 #: grub-core/loader/sparc64/ieee1275/linux.c:513 msgid "Load initrd." msgstr "加载 initrd。" #. TRANSLATORS: DTB stands for device tree blob. #: grub-core/loader/arm/linux.c:499 grub-core/loader/efi/fdt.c:176 msgid "Load DTB file." msgstr "加载 DTB 文件。" #: grub-core/loader/arm64/xen_boot.c:142 msgid "failed to get FDT" msgstr "获取 FDT 失败" #: grub-core/loader/arm64/xen_boot.c:404 msgid "you need to load the Xen Hypervisor first" msgstr "您需要先加载 Xen Hypervisor" #: grub-core/loader/arm64/xen_boot.c:500 msgid "Load a xen hypervisor." msgstr "加载 Xen Hypervisor。" #: grub-core/loader/arm64/xen_boot.c:503 msgid "Load a xen module." msgstr "加载 Xen 模块。" #: grub-core/loader/efi/appleloader.c:231 msgid "[OPTS]" msgstr "[选项]" #. TRANSLATORS: This command is used on EFI to #. switch to BIOS mode and boot the OS requiring #. BIOS. #: grub-core/loader/efi/appleloader.c:235 msgid "Boot BIOS-based system." msgstr "引导基于 BIOS 的系统。" #: grub-core/loader/efi/chainloader.c:437 #: grub-core/loader/i386/pc/chainloader.c:303 msgid "Load another boot loader." msgstr "加载其他引导加载器。" #: grub-core/loader/efi/linux.c:100 msgid "plain image kernel not supported - rebuild with CONFIG_(U)EFI_STUB enabled" msgstr "不支持普通内核镜像 - 请启用 CONFIG_(U)EFI_STUB 重新构建内核" #: grub-core/loader/efi/linux.c:413 msgid "failed to install protocols" msgstr "无法安装协议" #: grub-core/loader/emu/linux.c:65 msgid "error trying to perform kexec load operation" msgstr "尝试执行 kexec 加载操作失败" #: grub-core/loader/emu/linux.c:71 msgid "use '" msgstr "使用 \"" #: grub-core/loader/emu/linux.c:82 #, c-format msgid "error trying to perform 'systemctl kexec': %d" msgstr "尝试执行 \"systemctl kexec\" 失败：%d" #: grub-core/loader/emu/linux.c:93 #, c-format msgid "error trying to directly perform 'kexec -ex': %d" msgstr "尝试直接执行 \"kexec -ex\" 失败：%d" #: grub-core/loader/emu/linux.c:123 #, c-format msgid "cannot find kernel file %s" msgstr "无法找到内核文件 %s" #: grub-core/loader/emu/linux.c:156 #, c-format msgid "Cannot find initrd file %s" msgstr "无法找到 initrd 文件 %s" #: grub-core/loader/i386/bsd.c:104 msgid "Display output on all consoles." msgstr "在所有控制台显示输出。" #: grub-core/loader/i386/bsd.c:105 grub-core/loader/i386/bsd.c:139 #: grub-core/loader/i386/bsd.c:172 msgid "Use serial console." msgstr "使用串行控制台。" #: grub-core/loader/i386/bsd.c:106 grub-core/loader/i386/bsd.c:132 #: grub-core/loader/i386/bsd.c:160 msgid "Ask for file name to reboot from." msgstr "询问重启使用的文件名。" #: grub-core/loader/i386/bsd.c:107 msgid "Use CD-ROM as root." msgstr "使用 CD-ROM 作为根。" #: grub-core/loader/i386/bsd.c:108 msgid "Invoke user configuration routing." msgstr "调用用户配置路由。" #: grub-core/loader/i386/bsd.c:109 grub-core/loader/i386/bsd.c:136 #: grub-core/loader/i386/bsd.c:163 msgid "Enter in KDB on boot." msgstr "引导后进入 KDB。" #: grub-core/loader/i386/bsd.c:110 msgid "Use GDB remote debugger instead of DDB." msgstr "使用 GDB 远程调试器替代 DDB。" #: grub-core/loader/i386/bsd.c:111 msgid "Disable all boot output." msgstr "禁用所有引导输出。" #: grub-core/loader/i386/bsd.c:113 msgid "Wait for keypress after every line of output." msgstr "每输出一行后暂停（按任意键继续）。" #: grub-core/loader/i386/bsd.c:115 msgid "Use compiled-in root device." msgstr "使用内置根设备。" #: grub-core/loader/i386/bsd.c:116 grub-core/loader/i386/bsd.c:135 #: grub-core/loader/i386/bsd.c:166 msgid "Boot into single mode." msgstr "以单用户模式引导。" #: grub-core/loader/i386/bsd.c:117 grub-core/loader/i386/bsd.c:167 msgid "Boot with verbose messages." msgstr "引导时显示详细信息。" #: grub-core/loader/i386/bsd.c:133 grub-core/loader/i386/bsd.c:161 msgid "Don't reboot, just halt." msgstr "不要重启，仅关机。" #: grub-core/loader/i386/bsd.c:134 grub-core/loader/i386/bsd.c:162 msgid "Change configured devices." msgstr "更改已配置的设备。" #. TRANSLATORS: "com" is static and not to be translated. It refers to #. serial ports e.g. com1. #. #: grub-core/loader/i386/bsd.c:143 msgid "comUNIT[,SPEED]" msgstr "com单元[,速度]" #: grub-core/loader/i386/bsd.c:158 msgid "Disable SMP." msgstr "禁用 SMP。" #: grub-core/loader/i386/bsd.c:159 msgid "Disable ACPI." msgstr "禁用 ACPI。" #: grub-core/loader/i386/bsd.c:165 msgid "Don't display boot diagnostic messages." msgstr "不显示引导诊断消息。" #: grub-core/loader/i386/bsd.c:168 msgid "Boot with debug messages." msgstr "引导时显示调试信息。" #: grub-core/loader/i386/bsd.c:169 msgid "Suppress normal output (warnings remain)." msgstr "不显示普通输出（仍显示警告）。" #. TRANSLATORS: "com" is static and not to be translated. It refers to #. serial ports e.g. com1. #. #: grub-core/loader/i386/bsd.c:176 msgid "[ADDR|comUNIT][,SPEED]" msgstr "[地址|com单元][,速度]" #: grub-core/loader/i386/bsd.c:490 grub-core/loader/i386/bsd.c:556 msgid "name" msgstr "名称" #: grub-core/loader/i386/bsd.c:490 grub-core/loader/i386/bsd.c:556 msgid "addr" msgstr "地址" #: grub-core/loader/i386/bsd.c:491 grub-core/loader/i386/bsd.c:557 msgid "size" msgstr "大小" #: grub-core/loader/i386/bsd.c:1153 grub-core/loader/i386/linux.c:467 #: grub-core/loader/i386/xnu.c:1025 msgid "Booting in blind mode" msgstr "正在使用盲模式进行引导" #: grub-core/loader/i386/bsd.c:2144 msgid "Load kernel of FreeBSD." msgstr "加载 FreeBSD 内核。" #: grub-core/loader/i386/bsd.c:2147 msgid "Load kernel of OpenBSD." msgstr "加载 OpenBSD 内核。" #: grub-core/loader/i386/bsd.c:2150 msgid "Load kernel of NetBSD." msgstr "加载 NetBSD 内核。" #: grub-core/loader/i386/bsd.c:2154 msgid "Load FreeBSD env." msgstr "加载 FreeBSD 环境。" #: grub-core/loader/i386/bsd.c:2157 msgid "Load FreeBSD kernel module." msgstr "加载 FreeBSD 内核模块。" #: grub-core/loader/i386/bsd.c:2160 msgid "Load NetBSD kernel module." msgstr "加载 NetBSD 内核模块。" #: grub-core/loader/i386/bsd.c:2163 msgid "Load NetBSD kernel module (ELF)." msgstr "加载 NetBSD 内核模块 (ELF)。" #: grub-core/loader/i386/bsd.c:2166 msgid "Load FreeBSD kernel module (ELF)." msgstr "加载 FreeBSD 内核模块 (ELF)。" #. TRANSLATORS: ramdisk isn't identifier, #. it can be translated. #: grub-core/loader/i386/bsd.c:2172 msgid "Load kOpenBSD ramdisk." msgstr "加载 kOpenBSD 内存盘。" #. TRANSLATORS: "payload" is a term used #. by coreboot and must be translated in #. sync with coreboot. If unsure, #. let it untranslated. #: grub-core/loader/i386/coreboot/chainloader.c:510 msgid "Load another coreboot payload" msgstr "加载另一个 coreboot 负载" #: grub-core/loader/i386/linux.c:882 msgid "Legacy `ask' parameter no longer supported." msgstr "过时的 \"ask\" 参数已不再被支持。" #: grub-core/loader/i386/linux.c:898 grub-core/loader/i386/linux.c:908 #: grub-core/loader/i386/linux.c:938 #, c-format msgid "%s is deprecated. Use set gfxpayload=%s before linux command instead.\n" msgstr "%s 已弃用。请改为在执行 linux 命令前使用 set gfxpayload=%s。\n" #. TRANSLATORS: "x" has to be entered in, like an identifier, #. so please don't use better Unicode codepoints. #: grub-core/loader/i386/linux.c:921 #, c-format msgid "%s is deprecated. VGA mode %d isn't recognized. Use set gfxpayload=WIDTHxHEIGHT[xDEPTH] before linux command instead.\n" msgstr "%s 已弃用。VGA 模式 %d 无法识别。请改为在执行 linux 命令前使用 set gfxpayload=宽度x高度[x深度]。\n" #: grub-core/loader/i386/linux.c:1092 msgid "the size of initrd is bigger than addr_max" msgstr "initrd 的大小大于 addr_max" #: grub-core/loader/i386/pc/chainloader.c:302 msgid "[--force|--bpb] FILE" msgstr "[--force|--bpb] 文件" #: grub-core/loader/i386/pc/freedos.c:148 util/setup.c:297 #, c-format msgid "the size of `%s' is too large" msgstr "\"%s\" 的尺寸太大" #: grub-core/loader/i386/pc/freedos.c:183 msgid "Load FreeDOS kernel.sys." msgstr "加载 FreeDOS kernel.sys。" #: grub-core/loader/i386/pc/ntldr.c:155 msgid "Load NTLDR or BootMGR." msgstr "加载 NTLDR 或 BootMGR。" #. TRANSLATORS: it's about guessing which GRUB disk #. is which Plan9 disk. If your language has no #. word "mapping" you can use another word which #. means that the GRUBDEVICE and PLAN9DEVICE are #. actually the same device, just named differently #. in OS and GRUB. #: grub-core/loader/i386/pc/plan9.c:59 msgid "Override guessed mapping of Plan9 devices." msgstr "覆盖猜测到的 Plan9 设备映射。" #: grub-core/loader/i386/pc/plan9.c:60 msgid "GRUBDEVICE=PLAN9DEVICE" msgstr "GRUB设备=PLAN9设备" #: grub-core/loader/i386/pc/plan9.c:599 msgid "KERNEL ARGS" msgstr "内核 参数" #: grub-core/loader/i386/pc/plan9.c:599 msgid "Load Plan9 kernel." msgstr "加载 Plan9 内核。" #: grub-core/loader/i386/pc/pxechainloader.c:161 msgid "Load a PXE image." msgstr "加载 PXE 镜像。" #: grub-core/loader/i386/pc/truecrypt.c:226 msgid "Load Truecrypt ISO." msgstr "加载 Truecrypt ISO。" #: grub-core/loader/i386/xen.c:789 grub-core/loader/i386/xen.c:872 msgid "initrd already loaded" msgstr "initrd 已加载" #: grub-core/loader/i386/xen.c:975 msgid "Load module." msgstr "加载模块。" #: grub-core/loader/i386/xnu.c:998 msgid "Press any key to launch xnu" msgstr "按任意键启动 xnu" #. TRANSLATORS: `device-properties' #. is a variable name, #. not a program. #: grub-core/loader/i386/xnu.c:1154 msgid "Load `device-properties' dump." msgstr "加载 \"device-properties\" 转储。" #: grub-core/loader/ia64/efi/linux.c:124 msgid "Could not locate FPSWA driver" msgstr "无法定位 FPSWA 驱动" #: grub-core/loader/ia64/efi/linux.c:132 msgid "FPSWA protocol wasn't able to find the interface" msgstr "FPSWA 协议未能找到接口" #: grub-core/loader/ia64/efi/linux.c:580 msgid "No FPSWA found" msgstr "未找到 FPSWA" #: grub-core/loader/ia64/efi/linux.c:582 #, c-format msgid "FPSWA revision: %x\n" msgstr "FPSWA 版本：%x\n" #: grub-core/loader/ia64/efi/linux.c:591 msgid "FILE [ARGS...]" msgstr "文件 [参数...]" #: grub-core/loader/ia64/efi/linux.c:597 msgid "Display FPSWA version." msgstr "显示 FPSWA 版本。" #: grub-core/loader/multiboot.c:248 msgid "WARNING: no console will be available to OS" msgstr "警告：操作系统将没有可用控制台" #: grub-core/loader/multiboot.c:450 msgid "Load a multiboot 2 kernel." msgstr "加载 multiboot 2 内核。" #: grub-core/loader/multiboot.c:453 msgid "Load a multiboot 2 module." msgstr "加载 multiboot 2 模块。" #: grub-core/loader/multiboot.c:456 msgid "Load a multiboot kernel." msgstr "加载 multiboot 内核。" #: grub-core/loader/multiboot.c:459 msgid "Load a multiboot module." msgstr "加载 multiboot 模块。" #: grub-core/loader/multiboot_elfxx.c:208 msgid "memory being set is larger than allocated memory" msgstr "要设置的内存大于已分配的内存" #: grub-core/loader/multiboot_elfxx.c:254 msgid "ELF section header region is larger than the file size" msgstr "EFI 分区头区域大于文件大小" #: grub-core/loader/xnu.c:674 msgid "missing p-list filename" msgstr "缺少 p-list 文件名" #: grub-core/loader/xnu.c:1435 grub-core/term/gfxterm_background.c:45 msgid "Background image mode." msgstr "背景图像模式。" #. TRANSLATORS: This refers to background image mode (stretched or #. in left-top corner). Note that GRUB will accept only original #. keywords stretch and normal, not the translated ones. #. So please put both in translation #. e.g. stretch(=%STRETCH%)|normal(=%NORMAL%). #. The percents mark the translated version. Since many people #. may not know the word stretch or normal I recommend #. putting the translation either here or in "Background image mode." #. string. #: grub-core/loader/xnu.c:1435 grub-core/term/gfxterm_background.c:55 msgid "stretch|normal" msgstr "stretch|normal（拉伸|正常）" #: grub-core/loader/xnu.c:1501 msgid "Load XNU image." msgstr "加载 XNU 镜像。" #: grub-core/loader/xnu.c:1503 msgid "Load 64-bit XNU image." msgstr "加载 64 位 XNU 镜像。" #: grub-core/loader/xnu.c:1505 msgid "Load XNU extension package." msgstr "加载 XNU 扩展包。" #: grub-core/loader/xnu.c:1507 msgid "Load XNU extension." msgstr "加载 XNU 扩展。" #. TRANSLATORS: OSBundleRequired is #. a variable name in xnu extensions #. manifests. It behaves mostly like #. GNU/Linux runlevels. #. #: grub-core/loader/xnu.c:1515 msgid "DIRECTORY [OSBundleRequired]" msgstr "目录 [OSBundleRequired]" #. TRANSLATORS: There are many extensions #. in extension directory. #. #: grub-core/loader/xnu.c:1520 msgid "Load XNU extension directory." msgstr "加载 XNU 扩展目录。" #. TRANSLATORS: ramdisk here isn't identifier. It can be translated. #: grub-core/loader/xnu.c:1523 msgid "Load XNU ramdisk. It will be available in OS as md0." msgstr "加载 XNU 内存盘。它将在操作系统上显示为 md0。" #: grub-core/loader/xnu.c:1527 msgid "Load a splash image for XNU." msgstr "加载 XNU 引导图像。" #: grub-core/loader/xnu.c:1532 msgid "Load an image of hibernated XNU." msgstr "加载已休眠的 XNU 镜像。" #: grub-core/mmap/mmap.c:541 msgid "ADDR1,MASK1[,ADDR2,MASK2[,...]]" msgstr "地址1,掩码1[,地址2,掩码2[,...]]" #: grub-core/mmap/mmap.c:542 msgid "Declare memory regions as faulty (badram)." msgstr "声明内存区域存在故障 (badram)。" #: grub-core/mmap/mmap.c:544 msgid "FROM[K|M|G] TO[K|M|G]" msgstr "起始[K|M|G] 终止[K|M|G]" #: grub-core/mmap/mmap.c:545 msgid "Remove any memory regions in specified range." msgstr "删除指定范围内的全部内存区域。" #: grub-core/net/bootp.c:692 msgid "four arguments expected" msgstr "需要四个参数" #: grub-core/net/bootp.c:700 grub-core/net/net.c:1184 #, c-format msgid "unrecognised network interface `%s'" msgstr "无法识别的网络端口 \"%s\"" #: grub-core/net/bootp.c:703 msgid "no DHCP info found" msgstr "未找到 DHCP 信息" #: grub-core/net/bootp.c:713 msgid "no DHCP options found" msgstr "未找到 DHCP 选项" #: grub-core/net/bootp.c:721 msgid "invalid DHCP option code" msgstr "无效的 DHCP 选项编码" #: grub-core/net/bootp.c:725 #, c-format msgid "no DHCP option %u found" msgstr "未找到 DHCP 选项 %u" #: grub-core/net/bootp.c:782 #, c-format msgid "unrecognised DHCP option format specification `%s'" msgstr "无法识别的 DHCP 选项格式说明符 \"%s\"" #: grub-core/net/bootp.c:806 msgid "no network card found" msgstr "未找到网卡" #: grub-core/net/bootp.c:898 grub-core/net/net.c:395 #, c-format msgid "couldn't autoconfigure %s" msgstr "无法自动配置 %s" #: grub-core/net/bootp.c:912 grub-core/net/bootp.c:915 msgid "[CARD]" msgstr "[网卡]" #: grub-core/net/bootp.c:913 msgid "perform a bootp autoconfiguration" msgstr "执行 bootp 自动配置" #: grub-core/net/bootp.c:916 msgid "perform a DHCP autoconfiguration" msgstr "执行 DHCP 自动配置" #: grub-core/net/bootp.c:918 msgid "VAR INTERFACE NUMBER DESCRIPTION" msgstr "变量 接口 数字 描述" #: grub-core/net/bootp.c:919 msgid "retrieve DHCP option and save it into VAR. If VAR is - then print the value." msgstr "获取 DHCP 选项并将其保存到 <变量>。如果 <变量> 是 -，则输出该值。" #: grub-core/net/dns.c:455 msgid "no DNS servers configured" msgstr "未配置 DNS 服务器" #: grub-core/net/dns.c:518 msgid "domain name component is too long" msgstr "域名的组成部分太长" #: grub-core/net/dns.c:614 grub-core/net/dns.c:664 msgid "no DNS record found" msgstr "未找到 DNS 记录" #: grub-core/net/dns.c:622 msgid "no DNS reply received" msgstr "未收到 DNS 回复" #: grub-core/net/dns.c:680 msgid "only ipv4" msgstr "仅 ipv4" #: grub-core/net/dns.c:684 msgid "only ipv6" msgstr "仅 ipv6" #: grub-core/net/dns.c:688 msgid "prefer ipv4" msgstr "ipv4 优先" #: grub-core/net/dns.c:692 msgid "prefer ipv6" msgstr "ipv6 优先" #: grub-core/net/dns.c:760 msgid "ADDRESS DNSSERVER" msgstr "地址 DNS服务器" #: grub-core/net/dns.c:761 msgid "Perform a DNS lookup" msgstr "进行一次 DNS 查询" #: grub-core/net/dns.c:763 grub-core/net/dns.c:766 msgid "DNSSERVER" msgstr "DNS服务器" #: grub-core/net/dns.c:764 msgid "Add a DNS server" msgstr "添加一个 DNS 服务器" #: grub-core/net/dns.c:767 msgid "Remove a DNS server" msgstr "移除一个 DNS 服务器" #: grub-core/net/dns.c:769 msgid "List DNS servers" msgstr "列出 DNS 服务器" #: grub-core/net/drivers/efi/efinet.c:44 msgid "network protocol not available, can't send packet" msgstr "没有可用的网络协议，不能发送包" #: grub-core/net/drivers/efi/efinet.c:52 grub-core/net/drivers/efi/efinet.c:68 #: grub-core/net/drivers/efi/efinet.c:80 grub-core/net/drivers/emu/emunet.c:62 #: grub-core/net/drivers/i386/pc/pxe.c:273 #: grub-core/net/drivers/ieee1275/ofnet.c:75 #: grub-core/net/drivers/uboot/ubootnet.c:62 msgid "couldn't send network packet" msgstr "无法发送网络包" #: grub-core/net/drivers/ieee1275/ofnet.c:329 msgid "alloc-mem failed" msgstr "alloc-mem 失败" #: grub-core/net/drivers/ieee1275/ofnet.c:357 msgid "free-mem failed" msgstr "free-mem 失败" #: grub-core/net/http.c:75 msgid "invalid HTTP header - LF without CR" msgstr "无效的 HTTP 头 - LF 但没有 CR" #: grub-core/net/http.c:113 msgid "unsupported HTTP response" msgstr "不支持的 HTTP 响应" #. TRANSLATORS: GRUB HTTP code is pretty young. So even perfectly #. valid answers like 403 will trigger this very generic message. #: grub-core/net/http.c:134 #, c-format msgid "unsupported HTTP error %d: %s" msgstr "不支持的 HTTP 错误 %d：%s" #: grub-core/net/http.c:446 grub-core/net/tftp.c:400 #, c-format msgid "time out opening `%s'" msgstr "打开 \"%s\" 超时" #: grub-core/net/net.c:184 msgid "timeout: could not resolve hardware address" msgstr "超时：无法解析硬件地址" #: grub-core/net/net.c:563 #, c-format msgid "unresolvable address %s" msgstr "无法解析的地址 %s" #: grub-core/net/net.c:609 #, c-format msgid "unrecognised network address `%s'" msgstr "无法识别的网络地址 \"%s\"" #: grub-core/net/net.c:676 msgid "destination unreachable" msgstr "目标不可达" #. TRANSLATORS: route loop is a condition when e.g. #. to contact server A you need to go through B #. and to contact B you need to go through A. #: grub-core/net/net.c:699 msgid "route loop detected" msgstr "检测到路由回路" #: grub-core/net/net.c:715 msgid "address not found" msgstr "地址未找到" #: grub-core/net/net.c:719 msgid "you can't delete this address" msgstr "您不能删除这个地址" #: grub-core/net/net.c:791 grub-core/net/net.c:821 #, c-format msgid "Unsupported hw address type %d\n" msgstr "不支持的硬件地址类型 %d\n" #: grub-core/net/net.c:842 #, c-format msgid "Unsupported address type %d\n" msgstr "不支持的地址类型 %d\n" #: grub-core/net/net.c:1046 grub-core/net/net.c:1160 msgid "three arguments expected" msgstr "需要三个参数" #: grub-core/net/net.c:1052 msgid "card not found" msgstr "未找到网卡" #: grub-core/net/net.c:1205 #, c-format msgid "non-numeric or invalid number `%s'" msgstr "数字 \"%s\" 不是数字或者无效" #: grub-core/net/net.c:1209 #, c-format msgid "vlan id `%s' not in the valid range of 0-4094" msgstr "vlan id \"%s\" 不在有效范围 0-4094 内" #: grub-core/net/net.c:1222 msgid "network interface not found" msgstr "未找到网络接口" #. TRANSLATORS: it refers to the network address. #: grub-core/net/net.c:1232 msgid "temporary" msgstr "临时" #: grub-core/net/net.c:1255 #, c-format msgid "Unknown address type %d\n" msgstr "未知的地址类型 %d\n" #: grub-core/net/net.c:1368 msgid "no server is specified" msgstr "没有指定服务器" #: grub-core/net/net.c:1383 msgid "mismatched [ in address" msgstr "地址中有不匹配的 [" #: grub-core/net/net.c:1393 grub-core/net/net.c:1422 msgid "bad port number" msgstr "错误的端口号" #: grub-core/net/net.c:1772 #, c-format msgid "timeout reading `%s'" msgstr "读取 \"%s\" 超时" #. TRANSLATORS: HWADDRESS stands for #. "hardware address". #: grub-core/net/net.c:2035 msgid "SHORTNAME CARD ADDRESS [HWADDRESS]" msgstr "短名称 网卡 地址 [硬件地址]" #: grub-core/net/net.c:2036 msgid "Add a network address." msgstr "添加一个网络地址。" #: grub-core/net/net.c:2039 msgid "[CARD [HWADDRESS]]" msgstr "[网卡 [硬件地址]]" #: grub-core/net/net.c:2040 msgid "Perform an IPV6 autoconfiguration" msgstr "进行 IPv6 自动配置" #: grub-core/net/net.c:2043 grub-core/net/net.c:2050 msgid "SHORTNAME" msgstr "短名称" #: grub-core/net/net.c:2044 msgid "Delete a network address." msgstr "删除一个网络地址。" #. TRANSLATORS: "gw" is a keyword. #: grub-core/net/net.c:2047 msgid "SHORTNAME NET [INTERFACE| gw GATEWAY]" msgstr "短名称 网络 [接口| gw 网关]" #: grub-core/net/net.c:2048 msgid "Add a network route." msgstr "添加一条网络路由。" #: grub-core/net/net.c:2051 msgid "Delete a network route." msgstr "删除一条网络路由。" #: grub-core/net/net.c:2053 msgid "SHORTNAME VLANID" msgstr "短名称 VLANID" #: grub-core/net/net.c:2054 msgid "Set an interface's vlan id." msgstr "设置接口的 vlan id。" #: grub-core/net/net.c:2056 msgid "list network routes" msgstr "列出网络路由" #: grub-core/net/net.c:2058 msgid "list network cards" msgstr "列出网卡" #: grub-core/net/net.c:2060 msgid "list network addresses" msgstr "列出网络地址" #: grub-core/net/tcp.c:686 msgid "connection refused" msgstr "连接被拒绝" #: grub-core/net/tcp.c:689 msgid "connection timeout" msgstr "连接超时" #: grub-core/normal/auth.c:220 msgid "Enter username: " msgstr "输入用户名：" #: grub-core/normal/auth.c:269 msgid "[USERLIST]" msgstr "[用户列表]" #: grub-core/normal/auth.c:270 msgid "Check whether user is in USERLIST." msgstr "检查用户是否位于 <用户列表>。" #: grub-core/normal/cmdline.c:175 grub-core/normal/menu_entry.c:1077 msgid "Possible commands are:" msgstr "可能的命令：" #: grub-core/normal/cmdline.c:178 grub-core/normal/menu_entry.c:1081 msgid "Possible devices are:" msgstr "可能的设备：" #: grub-core/normal/cmdline.c:181 grub-core/normal/menu_entry.c:1085 msgid "Possible files are:" msgstr "可能的文件：" #: grub-core/normal/cmdline.c:184 grub-core/normal/menu_entry.c:1089 msgid "Possible partitions are:" msgstr "可能的分区：" #: grub-core/normal/cmdline.c:187 grub-core/normal/menu_entry.c:1093 msgid "Possible arguments are:" msgstr "可能的参数：" #. TRANSLATORS: this message is used if none of above matches. #. This shouldn't happen but please use the general term for #. "thing" or "object". #: grub-core/normal/cmdline.c:193 grub-core/normal/menu_entry.c:1097 msgid "Possible things are:" msgstr "可能的东西：" #: grub-core/normal/color.c:81 #, c-format msgid "Warning: syntax error (missing slash) in `%s'\n" msgstr "警告：\"%s\" 中有语法错误（缺少斜杠）\n" #: grub-core/normal/color.c:90 #, c-format msgid "Warning: invalid foreground color `%s'\n" msgstr "警告：无效的前景色 \"%s\"\n" #: grub-core/normal/color.c:96 #, c-format msgid "Warning: invalid background color `%s'\n" msgstr "警告：无效的背景色 \"%s\"\n" #: grub-core/normal/context.c:206 msgid "ENVVAR [ENVVAR] ..." msgstr "环境变量 [环境变量] ..." #: grub-core/normal/context.c:207 msgid "Export variables." msgstr "导出变量。" #: grub-core/normal/dyncmd.c:187 msgid "module isn't loaded" msgstr "模块未加载" #: grub-core/normal/main.c:212 #, c-format msgid "GNU GRUB version %s" msgstr "GNU GRUB %s 版" #: grub-core/normal/main.c:378 msgid "ESC at any time exits." msgstr "任何时候按下 ESC 均可退出。" #: grub-core/normal/main.c:381 #, c-format msgid "Minimal BASH-like line editing is supported. For the first word, TAB lists possible command completions. Anywhere else TAB lists possible device or file completions. To enable less(1)-like paging, \"set pager=1\". %s" msgstr "支持简单的类 Bash 行编辑。在第一个单词处按下 TAB 可以列出可用的命令名补全；在其他位置按下 TAB 可以列出可能的设备或文件。要启用类似 less(1) 的分页功能，请输入 \"set pager=1\"。%s" #. TRANSLATORS: it's command line prompt. #: grub-core/normal/main.c:414 msgid ">" msgstr ">" #. TRANSLATORS: it's command line prompt. #: grub-core/normal/main.c:417 msgid "grub>" msgstr "grub>" #: grub-core/normal/main.c:537 msgid "Clear the screen." msgstr "清屏。" #: grub-core/normal/main.c:546 msgid "Enter normal mode." msgstr "进入普通模式。" #: grub-core/normal/main.c:548 msgid "Exit from normal mode." msgstr "退出普通模式。" #: grub-core/normal/menu.c:66 grub-core/normal/menu_entry.c:1458 msgid "Press any key to continue..." msgstr "按任意键继续..." #: grub-core/normal/menu.c:824 #, c-format msgid "Booting `%s'" msgstr "正在引导 \"%s\"" #: grub-core/normal/menu.c:837 #, c-format msgid "Falling back to `%s'" msgstr "正在引导备选项 \"%s\"" #: grub-core/normal/menu.c:853 msgid "Failed to boot both default and fallback entries.\n" msgstr "引导默认启动项和备选启动项均失败。\n" #: grub-core/normal/menu_entry.c:1180 msgid "Booting a command list" msgstr "正在引导命令列表" #: grub-core/normal/menu_text.c:160 msgid "Minimum Emacs-like screen editing is supported. TAB lists completions. Press Ctrl-x or F10 to boot, Ctrl-c or F2 for a command-line or ESC to discard edits and return to the GRUB menu." msgstr "支持简单的类 Emacs 屏幕编辑。TAB 列出补全。按下 Ctrl-x 或 F10 进行引导，Ctrl-c 或 F2 进入命令行，ESC 放弃编辑并返回 GRUB 菜单。" #: grub-core/normal/menu_text.c:170 #, c-format msgid "Use the %C and %C keys to select which entry is highlighted." msgstr "使用 %C 键和 %C 键选择要高亮的启动项。" #. TRANSLATORS: that's the list of binary unit prefixes. #: grub-core/normal/misc.c:38 msgid "B" msgstr "B" #: grub-core/normal/misc.c:38 msgid "KiB" msgstr "KiB" #: grub-core/normal/misc.c:38 msgid "MiB" msgstr "MiB" #: grub-core/normal/misc.c:38 msgid "GiB" msgstr "GiB" #: grub-core/normal/misc.c:38 msgid "TiB" msgstr "TiB" #: grub-core/normal/misc.c:38 msgid "PiB" msgstr "PiB" #. TRANSLATORS: that's the list of binary unit prefixes. #: grub-core/normal/misc.c:40 msgid "K" msgstr "K" #: grub-core/normal/misc.c:40 msgid "M" msgstr "M" #: grub-core/normal/misc.c:40 msgid "G" msgstr "G" #: grub-core/normal/misc.c:40 msgid "T" msgstr "T" #: grub-core/normal/misc.c:40 msgid "P" msgstr "P" #. TRANSLATORS: that's the list of binary unit prefixes. #: grub-core/normal/misc.c:42 msgid "B/s" msgstr "B/s" #: grub-core/normal/misc.c:42 msgid "KiB/s" msgstr "KiB/s" #: grub-core/normal/misc.c:42 msgid "MiB/s" msgstr "MiB/s" #: grub-core/normal/misc.c:42 msgid "GiB/s" msgstr "GiB/s" #: grub-core/normal/misc.c:42 msgid "TiB/s" msgstr "TiB/s" #: grub-core/normal/misc.c:42 msgid "PiB/s" msgstr "PiB/s" #: grub-core/normal/misc.c:96 #, c-format msgid "Partition %s:" msgstr "分区 %s：" #: grub-core/normal/misc.c:101 #, c-format msgid "Device %s:" msgstr "设备 %s：" #: grub-core/normal/misc.c:107 msgid "Filesystem cannot be accessed" msgstr "无法访问文件系统" #: grub-core/normal/misc.c:121 #, c-format msgid "Filesystem type %s" msgstr "文件系统类型 %s" #: grub-core/normal/misc.c:131 #, c-format msgid "- Label `%s'" msgstr "- 标签 \"%s\"" #. TRANSLATORS: Arguments are year, month, day, hour, minute, #. second, day of the week (translated). #: grub-core/normal/misc.c:148 #, c-format msgid "- Last modification time %d-%02d-%02d %02d:%02d:%02d %s" msgstr "- 最近更改 %d-%02d-%02d %02d:%02d:%02d %s" #: grub-core/normal/misc.c:171 msgid "No known filesystem detected" msgstr "未检测到已知文件系统" #: grub-core/normal/misc.c:174 #, c-format msgid " - Partition start at %llu%sKiB" msgstr " - 分区始于 %llu%sKiB" #: grub-core/normal/misc.c:178 #, c-format msgid " - Sector size %uB" msgstr " - 扇区大小 %uB" #: grub-core/normal/misc.c:180 msgid " - Total size unknown" msgstr " - 总大小未知" #: grub-core/normal/misc.c:182 #, c-format msgid " - Total size %llu%sKiB" msgstr " - 总大小 %llu%sKiB" #. TRANSLATORS: Replace dot with appropriate decimal separator for #. your language. #: grub-core/normal/misc.c:186 msgid ".5" msgstr ".5" #. TRANSLATORS: This has to fit on one line. It's ok to include few #. words but don't write poems. #: grub-core/normal/term.c:82 msgid "--MORE--" msgstr "--更多--" #: grub-core/osdep/aros/config.c:92 grub-core/osdep/unix/config.c:137 #: grub-core/osdep/windows/config.c:55 #, c-format msgid "cannot open configuration file `%s': %s" msgstr "无法打开配置文件 \"%s\"：%s" #: grub-core/osdep/aros/hostdisk.c:521 msgid "Success" msgstr "成功" #: grub-core/osdep/basic/compress.c:8 grub-core/osdep/basic/compress.c:14 #: grub-core/osdep/basic/compress.c:20 msgid "no compression is available for your platform" msgstr "您的平台没有可用的压缩算法" #: grub-core/osdep/basic/no_platform.c:30 #: grub-core/osdep/windows/platform.c:428 msgid "no IEEE1275 routines are available for your platform" msgstr "您的平台没有可用的 IEEE1275 例程" #: grub-core/osdep/basic/no_platform.c:38 msgid "no EFI routines are available for your platform" msgstr "您的平台没有可用的 EFI 例程" #: grub-core/osdep/basic/no_platform.c:45 #: grub-core/osdep/windows/platform.c:435 msgid "no SGI routines are available for your platform" msgstr "您的平台没有可用的 SGI 例程" #. TRANSLATORS: The OS itself may very well have a random #. number generator but GRUB doesn't know how to access it. #: grub-core/osdep/basic/random.c:42 msgid "no random number generator is available for your OS" msgstr "您的操作系统没有可用的随机数生成器" #: grub-core/osdep/devmapper/getroot.c:78 msgid "Failed to create `device-mapper' tree" msgstr "创建 \"device-mapper\" 树失败" #: grub-core/osdep/devmapper/getroot.c:196 #: grub-core/osdep/freebsd/getroot.c:202 #, c-format msgid "can't mount encrypted volume `%s': %s" msgstr "无法挂载加密卷 \"%s\"：%s" #: grub-core/osdep/devmapper/getroot.c:218 #, c-format msgid "cannot open grub disk `%s'" msgstr "无法打开 grub 磁盘 \"%s\"" #: grub-core/osdep/devmapper/getroot.c:221 #, c-format msgid "cannot get cryptodisk from source disk `%s'" msgstr "无法从源磁盘 \"%s\" 获取加密磁盘" #: grub-core/osdep/devmapper/getroot.c:230 #, c-format msgid "cannot get dm node name for grub dev `%s'" msgstr "无法为 grub 设备 \"%s\" 获取 dm 节点名" #: grub-core/osdep/devmapper/getroot.c:237 msgid "can't create dm task DM_DEVICE_TABLE" msgstr "无法创建 dm 任务 DM_DEVICE_TABLE" #: grub-core/osdep/devmapper/getroot.c:239 #, c-format msgid "can't set dm task name to `%s'" msgstr "无法将 dm 任务名设置为 \"%s\"" #: grub-core/osdep/devmapper/getroot.c:241 #, c-format msgid "can't run dm task for `%s'" msgstr "无法为 \"%s\" 执行 dm 任务" #: grub-core/osdep/devmapper/getroot.c:249 #, c-format msgid "dm target of type `%s' is not `crypt'" msgstr "类型 \"%s\" 的 dm 目标不是 \"crypt\"" #: grub-core/osdep/devmapper/getroot.c:261 #, c-format msgid "can't get cipher from dm-crypt parameters `%s'" msgstr "无法从 dm-crypt 参数 \"%s\" 获得密码" #: grub-core/osdep/devmapper/getroot.c:265 msgid "could not strndup cipher of length `%" msgstr "无法 strndup 密码，长度为 \"%" #: grub-core/osdep/devmapper/getroot.c:272 #, c-format msgid "can't get cipher mode from dm-crypt parameters `%s'" msgstr "无法从 dm-crypt 参数 \"%s\" 获得密码模式" #: grub-core/osdep/devmapper/getroot.c:276 msgid "could not strndup cipher_mode of length `%" msgstr "无法 strndup 密码_模式，长度为 \"%" #: grub-core/osdep/devmapper/getroot.c:283 #, c-format msgid "can't set cipher of cryptodisk `%s' to `%s' with mode `%s'" msgstr "无法设置加密磁盘 \"%s\" 的密码为 \"%s\"、模式为 \"%s\"" #: grub-core/osdep/devmapper/getroot.c:297 msgid "can't lookup hash sha256 by name" msgstr "无法通过名字找到哈希 sha256" #. TRANSLATORS: geom is the name of (k)FreeBSD device framework. #. Usually left untranslated. #. #: grub-core/osdep/freebsd/getroot.c:82 grub-core/osdep/freebsd/getroot.c:164 #: grub-core/osdep/freebsd/getroot.c:258 grub-core/osdep/freebsd/getroot.c:316 msgid "couldn't open geom" msgstr "无法打开 geom" #: grub-core/osdep/freebsd/getroot.c:182 grub-core/osdep/freebsd/getroot.c:277 msgid "couldn't find geli consumer" msgstr "无法找到 geli consumer" #: grub-core/osdep/freebsd/getroot.c:282 msgid "couldn't retrieve geli UUID" msgstr "无法获取 geli UUID" #. TRANSLATORS: geom is the name of (k)FreeBSD device framework. #. Usually left untranslated. "part" is the identifier of one of its #. classes. #: grub-core/osdep/freebsd/getroot.c:325 msgid "couldn't find geom `part' class" msgstr "无法找到 geom 的 \"part\" 类" #: grub-core/osdep/freebsd/hostdisk.c:70 grub-core/osdep/linux/hostdisk.c:92 msgid "unaligned device size" msgstr "未对齐的设备大小" #: grub-core/osdep/generic/blocklist.c:56 #, c-format msgid "attempting to read the core image `%s' from GRUB" msgstr "正在尝试读取来自 GRUB 的核心镜像 \"%s\"" #: grub-core/osdep/generic/blocklist.c:57 #, c-format msgid "attempting to read the core image `%s' from GRUB again" msgstr "正在尝试再次读取来自 GRUB 的核心镜像 \"%s\"" #: grub-core/osdep/generic/blocklist.c:115 #, c-format msgid "cannot read `%s' correctly" msgstr "无法正确读取 \"%s\"" #: grub-core/osdep/generic/blocklist.c:126 msgid "failed to read the sectors of the core image" msgstr "读取核心镜像的扇区失败" #. TRANSLATORS: On GNU/Hurd, a "translator" is similar to a filesystem #. mount, but handled by a userland daemon, whose invocation command line #. is being fetched here. First %s is the file being looked at (for which #. we are fetching the "translator" command line), second %s is the error #. message. #. #: grub-core/osdep/hurd/getroot.c:79 #, c-format msgid "cannot get translator command line for path `%s': %s" msgstr "无法获取路径 \"%s\" 的翻译器命令行：%s" #: grub-core/osdep/hurd/getroot.c:82 #, c-format msgid "translator command line is empty for path `%s'" msgstr "路径 \"%s\" 的翻译器命令行为空" #. TRANSLATORS: we expect to get something like #. /hurd/foobar --option1 --option2=baz /dev/something #. #: grub-core/osdep/hurd/getroot.c:98 #, c-format msgid "translator `%s' for path `%s' has several non-option words, at least `%s' and `%s'" msgstr "路径 \"%2$s\" 的翻译器 \"%1$s\" 有多个非选项的单词，至少包括 \"%3$s\" 和 \"%4$s\"" #. TRANSLATORS: we expect to get something like #. /hurd/foobar --option1 --option2=baz /dev/something #. #: grub-core/osdep/hurd/getroot.c:109 #, c-format msgid "translator `%s' for path `%s' is given only options, cannot find device part" msgstr "路径 \"%2$s\" 的翻译器 \"%1$s\" 仅给出了选项，缺少设备部分" #: grub-core/osdep/hurd/hostdisk.c:73 #, c-format msgid "Storage information for `%s' does not include type" msgstr "\"%s\" 的存储信息未包含类型" #: grub-core/osdep/hurd/hostdisk.c:75 #, c-format msgid "`%s' is not a local disk" msgstr "\"%s\" 不是本地磁盘" #: grub-core/osdep/hurd/hostdisk.c:78 #, c-format msgid "Storage information for `%s' indicates neither a plain partition nor a plain disk" msgstr "\"%s\" 的存储信息表明它既不是普通分区，也不是普通磁盘" #: grub-core/osdep/linux/blocklist.c:81 grub-core/osdep/linux/blocklist.c:96 #: grub-core/osdep/linux/blocklist.c:122 #, c-format msgid "can't retrieve blocklists: %s" msgstr "无法获取块列表：%s" #: grub-core/osdep/linux/blocklist.c:84 msgid "blocksize is not divisible by 512" msgstr "块大小无法被 512 整除" #: grub-core/osdep/linux/blocklist.c:86 msgid "invalid zero blocksize" msgstr "无效的块大小（为零）" #: grub-core/osdep/linux/blocklist.c:90 util/setup.c:747 msgid "can't retrieve blocklists" msgstr "无法获取块列表" #: grub-core/osdep/linux/getroot.c:151 #, c-format msgid "ioctl RAID_VERSION error: %s" msgstr "ioctl RAID_VERSION 错误：%s" #: grub-core/osdep/linux/getroot.c:157 grub-core/osdep/linux/getroot.c:161 #, c-format msgid "unsupported RAID version: %d.%d" msgstr "不支持的 RAID 版本：%d.%d" #: grub-core/osdep/linux/getroot.c:166 #, c-format msgid "ioctl GET_ARRAY_INFO error: %s" msgstr "ioctl GET_ARRAY_INFO 错误：%s" #: grub-core/osdep/linux/getroot.c:176 #, c-format msgid "ioctl GET_DISK_INFO error: %s" msgstr "ioctl GET_DISK_INFO 错误：%s" #: grub-core/osdep/linux/getroot.c:605 grub-core/osdep/linux/getroot.c:675 #: grub-core/osdep/unix/getroot.c:249 grub-core/osdep/unix/getroot.c:638 #: grub-core/osdep/unix/platform.c:92 grub-core/osdep/unix/platform.c:100 #, c-format msgid "Unable to open stream from %s: %s" msgstr "无法打开来自 %s 的流：%s" #: grub-core/osdep/linux/getroot.c:1043 #, c-format msgid "unknown kind of RAID device `%s'" msgstr "未知类型的 RAID 设备 \"%s\"" #: grub-core/osdep/linux/ofpath.c:181 #, c-format msgid "`obppath' not found in parent dirs of `%s', no IEEE1275 name discovery" msgstr "未在 \"%s\" 的父目录中找到 \"obppath\"，没有 IEEE1275 名称发现" #: grub-core/osdep/linux/ofpath.c:222 grub-core/osdep/unix/getroot.c:501 #: grub-core/osdep/unix/getroot.c:525 grub-core/osdep/unix/relpath.c:49 #: util/grub-install.c:1010 util/grub-install.c:1383 util/grub-probe.c:323 #, c-format msgid "failed to get canonical path of `%s'" msgstr "获取 \"%s\" 的规范路径失败" #: grub-core/osdep/linux/ofpath.c:740 #, c-format msgid "unknown device type %s" msgstr "未知的设备类型 %s" #: grub-core/osdep/linux/ofpath.c:758 util/ieee1275/grub-ofpathname.c:39 #, c-format msgid "Usage: %s DEVICE\n" msgstr "用法：%s 设备\n" #: grub-core/osdep/unix/exec.c:86 grub-core/osdep/unix/exec.c:172 #: grub-core/osdep/unix/exec.c:217 #, c-format msgid "Unable to fork: %s" msgstr "无法 fork：%s" #: grub-core/osdep/unix/exec.c:166 grub-core/osdep/unix/exec.c:211 #, c-format msgid "Unable to create pipe: %s" msgstr "无法创建管道：%s" #: grub-core/osdep/unix/getroot.c:366 msgid "cannot save the original directory" msgstr "无法保存原始目录" #: grub-core/osdep/unix/getroot.c:419 grub-core/osdep/unix/getroot.c:476 #: grub-core/osdep/unix/getroot.c:485 msgid "cannot restore the original directory" msgstr "无法恢复原始目录" #. TRANSLATORS: "stat" comes from the name of POSIX function. #: grub-core/osdep/unix/getroot.c:547 grub-core/osdep/unix/hostdisk.c:61 #: grub-core/osdep/unix/relpath.c:73 grub-core/osdep/unix/relpath.c:97 #: util/getroot.c:160 util/getroot.c:162 util/grub-install.c:785 #: util/grub-macbless.c:70 #, c-format msgid "cannot stat `%s': %s" msgstr "无法 stat \"%s\"：%s" #: grub-core/osdep/unix/hostdisk.c:296 #, c-format msgid "cannot make temporary file: %s" msgstr "无法创建临时文件：%s" #: grub-core/osdep/unix/hostdisk.c:314 #, c-format msgid "cannot make temporary directory: %s" msgstr "无法创建临时目录：%s" #: grub-core/osdep/unix/platform.c:77 #, c-format msgid "" "couldn't find IEEE1275 device path for %s.\n" "You will have to set `boot-device' variable manually" msgstr "" "无法找到 %s 的 IEEE1275 设备路径。\n" "您必须手动设置 \"boot-device\" 变量" #. TRANSLATORS: This message is shown when required executable `%s' #. isn't found. #: grub-core/osdep/unix/platform.c:149 grub-core/osdep/unix/platform.c:189 #, c-format msgid "%s: not found" msgstr "%s: 未找到" #: grub-core/osdep/unix/platform.c:225 #, c-format msgid "" "`nvsetenv' failed. \n" "You will have to set `boot-device' variable manually. At the IEEE1275 prompt, type:\n" " %s\n" msgstr "" "\"nvsetenv\" 失败。\n" "您必须手动设置 \"boot-device\" 变量。在 IEEE1275 提示符下，输入：\n" " %s\n" #: grub-core/osdep/unix/platform.c:240 msgid "You will have to set `SystemPartition' and `OSLoader' manually." msgstr "您必须手动设置 \"SystemPartition\" 和 \"OSLoader\"。" #. TRANSLATORS: canonical pathname is the #. complete one e.g. /etc/fstab. It has #. to contain `/' normally, if it doesn't #. we're in trouble and throw this error. #: grub-core/osdep/unix/relpath.c:90 msgid "no `/' in canonical filename" msgstr "规范文件名未包含 \"/\"" #: grub-core/osdep/windows/hostdisk.c:151 msgid "cygwin_conv_path() failed" msgstr "cygwin_conv_path() 失败" #: grub-core/osdep/windows/hostdisk.c:499 util/grub-install.c:581 msgid "couldn't retrieve random data" msgstr "无法获取随机数据" #: grub-core/osdep/windows/platform.c:97 msgid "Insufficient privileges to access firmware, assuming BIOS" msgstr "没有足够的权限访问固件，假定使用 BIOS" #: grub-core/osdep/windows/platform.c:225 msgid "no EFI routines are available when running in BIOS mode" msgstr "在 BIOS 模式下进行时，没有可用的 EFI 例程" #: grub-core/osdep/windows/platform.c:240 msgid "unexpected EFI error" msgstr "意外的 EFI 错误" #: grub-core/osdep/windows/platform.c:315 msgid "Couldn't find a free BootNNNN slot" msgstr "无法找到空闲的 BootNNNN 槽" #: grub-core/partmap/gpt.c:195 msgid "this GPT partition label contains no BIOS Boot Partition; embedding won't be possible" msgstr "此 GPT 分区标签未包含 BIOS 引导分区；无法进行嵌入" #: grub-core/partmap/gpt.c:203 msgid "your BIOS Boot Partition is too small; embedding won't be possible" msgstr "您的 BIOS 引导分区过小；无法进行嵌入" #. TRANSLATORS: MBR gap and boot track is the same thing and is the space #. between MBR and first partitition. If your language translates well only #. "boot track", you can just use it everywhere. Next two messages are about #. RAID controllers/software bugs which GRUB has to live with. Please spread #. the message that these are bugs in other software and not merely #. suboptimal behaviour. #: grub-core/partmap/msdos.c:51 #, c-format msgid "Sector %llu is already in use by raid controller `%s'; avoiding it. Please ask the manufacturer not to store data in MBR gap" msgstr "扇区 %llu 已被 raid 控制器 \"%s\" 使用；已避免使用它。请告诉制造商不要在 MBR 间隙中存储数据" #: grub-core/partmap/msdos.c:54 #, c-format msgid "Sector %llu is already in use by the program `%s'; avoiding it. This software may cause boot or other problems in future. Please ask its authors not to store data in the boot track" msgstr "扇区 %llu 已被程序 \"%s\" 使用；已避免使用它。该软件将来可能会带来引导问题或其他问题。请告诉该软件的作者不要在引导轨道中存储数据" #: grub-core/partmap/msdos.c:385 msgid "other software is using the embedding area, and there is not enough room for core.img. Such software is often trying to store data in a way that avoids detection. We recommend you investigate" msgstr "其他软件正在使用嵌入区域，因此没有足够的区间容纳 core.img。这类软件常常使用难以检测的方式存储数据。我们建议您调查此问题" #: grub-core/partmap/msdos.c:399 msgid "this msdos-style partition label has no post-MBR gap; embedding won't be possible" msgstr "此 DOS 风格的分区标签没有 MBR 后间隙；无法进行嵌入" #: grub-core/partmap/msdos.c:408 msgid "your embedding area is unusually small. core.img won't fit in it." msgstr "您的嵌入区域过小，无法容纳 core.img。" #: grub-core/parttool/msdospart.c:39 msgid "Make partition active" msgstr "标记分区为活动状态" #: grub-core/parttool/msdospart.c:51 msgid "not a primary partition" msgstr "不是主分区" #: grub-core/parttool/msdospart.c:69 #, c-format msgid "Partition %d is active now. \n" msgstr "分区 %d 现在处于活动状态。\n" #: grub-core/parttool/msdospart.c:74 #, c-format msgid "Cleared active flag on %d. \n" msgstr "已清除 %d 的活动标志。\n" #: grub-core/parttool/msdospart.c:87 msgid "Change partition type" msgstr "更改分区类型" #: grub-core/parttool/msdospart.c:88 msgid "Set `hidden' flag in partition type" msgstr "在分区类型中设置 \"hidden\"（隐藏）标志" #: grub-core/parttool/msdospart.c:130 #, c-format msgid "the partition type 0x%x isn't valid" msgstr "分区类型 0x%x 无效" #. TRANSLATORS: In this case we're actually writing to the disk and actively #. modifying partition type rather than just defining it. #: grub-core/parttool/msdospart.c:136 #, c-format msgid "Setting partition type to 0x%x\n" msgstr "正在设置分区类型为 0x%x\n" #. TRANSLATORS: 0 is a quantifier. "break" (similar to bash) #. can be used e.g. to break 3 loops at once. #. But asking it to break 0 loops makes no sense. #: grub-core/script/execute.c:143 msgid "can't break 0 loops" msgstr "无法使用 break 跳出 0 层循环" #. TRANSLATORS: It's about not being #. inside a function. "return" can be used only #. in a function and this error occurs if it's used #. anywhere else. #: grub-core/script/execute.c:227 msgid "not in function body" msgstr "不在函数体中" #: grub-core/script/execute.c:371 #, c-format msgid "invalid variable name `%s'" msgstr "无效的变量名 \"%s\"" #: grub-core/script/execute.c:958 msgid "cannot allocate command buffer" msgstr "无法分配命令缓冲区" #: grub-core/script/function.c:68 msgid "attempt to redefine a function being executed" msgstr "试图重新定义一个正在执行的函数" #: grub-core/script/lexer.c:149 util/grub-fstest.c:336 msgid "unexpected end of file" msgstr "文件意外结束" #: grub-core/script/main.c:55 grub-core/script/main.c:57 #: grub-core/script/main.c:59 grub-core/script/main.c:67 msgid "[NUM]" msgstr "[数字]" #: grub-core/script/main.c:55 msgid "Exit from loops" msgstr "退出循环" #: grub-core/script/main.c:57 msgid "Continue loops" msgstr "继续循环" #. TRANSLATORS: Positional arguments are #. arguments $0, $1, $2, ... #: grub-core/script/main.c:62 msgid "Shift positional parameters." msgstr "对位置参数进行移位。" #: grub-core/script/main.c:64 msgid "[VALUE]..." msgstr "[值]..." #: grub-core/script/main.c:65 msgid "Set positional parameters." msgstr "设置位置参数。" #. TRANSLATORS: It's a command description #. and "Return" is a verb, not a noun. The #. command in question is "return" and #. has exactly the same semanics as bash #. equivalent. #: grub-core/script/main.c:73 msgid "Return from a function." msgstr "从一个函数返回。" #: grub-core/term/gfxterm_background.c:176 msgid "[-m (stretch|normal)] FILE" msgstr "[-m (stretch|normal)] 文件" #: grub-core/term/gfxterm_background.c:177 msgid "Load background image for active terminal." msgstr "为活动终端加载背景图像。" #: grub-core/term/gfxterm_background.c:182 util/grub-install.c:302 #: util/grub-install.c:303 util/grub-mkrescue.c:107 util/grub-mkrescue.c:108 #: util/grub-render-label.c:61 util/grub-render-label.c:63 msgid "COLOR" msgstr "颜色" #: grub-core/term/gfxterm_background.c:183 msgid "Set background color for active terminal." msgstr "为活动终端设置背景颜色。" #: grub-core/term/i386/coreboot/cbmemc.c:139 msgid "Show CBMEM console content." msgstr "显示 CBMEM 控制台内容。" #: grub-core/term/serial.c:55 msgid "Set the serial unit." msgstr "设置串行单元。" #: grub-core/term/serial.c:56 msgid "Set the serial port address." msgstr "设置串行端口地址。" #: grub-core/term/serial.c:57 msgid "Set the serial port speed." msgstr "设置串行端口速度。" #: grub-core/term/serial.c:58 msgid "Set the serial port word length." msgstr "设置串行端口字长。" #: grub-core/term/serial.c:59 msgid "Set the serial port parity." msgstr "设置串行端口奇偶校验。" #: grub-core/term/serial.c:60 msgid "Set the serial port stop bits." msgstr "设置串行端口停止位。" #: grub-core/term/serial.c:61 msgid "Set the base frequency." msgstr "设置基础频率。" #: grub-core/term/serial.c:62 msgid "Enable/disable RTS/CTS." msgstr "启用/禁用 RTS/CTS。" #: grub-core/term/serial.c:181 msgid "incorrect MMIO address syntax" msgstr "不正确的 MMIO 地址语法" #: grub-core/term/serial.c:205 msgid "incorrect MMIO access size" msgstr "不正确的 MMIO 访问大小" #: grub-core/term/serial.c:276 #, c-format msgid "serial port `%s' isn't found" msgstr "未找到串行端口 \"%s\"" #: grub-core/term/serial.c:312 msgid "unsupported serial port flow control" msgstr "不支持的串行端口流控制" #: grub-core/term/serial.c:487 msgid "[OPTIONS...]" msgstr "[选项...]" #: grub-core/term/serial.c:488 msgid "Configure serial port." msgstr "配置串行端口。" #: grub-core/term/terminfo.c:184 #, c-format msgid "unknown terminfo type `%s'" msgstr "未知的 terminfo 类型 \"%s\"" #: grub-core/term/terminfo.c:671 msgid "ASCII" msgstr "ASCII" #: grub-core/term/terminfo.c:674 msgid "UTF-8" msgstr "UTF-8" #. TRANSLATORS: visually ordered UTF-8 is a non-compliant encoding #. based on UTF-8 with right-to-left languages written in reverse. #. Used on some terminals. Normal UTF-8 is refered as #. "logically-ordered UTF-8" by opposition. #: grub-core/term/terminfo.c:680 msgid "visually-ordered UTF-8" msgstr "视觉排序的 UTF-8" #: grub-core/term/terminfo.c:683 msgid "Unknown encoding" msgstr "未知的编码" #: grub-core/term/terminfo.c:687 msgid "Current terminfo types:" msgstr "当前 terminfo 类型：" #: grub-core/term/terminfo.c:702 msgid "Terminal is ASCII-only [default]." msgstr "终端仅使用 ASCII [默认]。" #: grub-core/term/terminfo.c:703 msgid "Terminal is logical-ordered UTF-8." msgstr "终端使用逻辑排序的 UTF-8。" #: grub-core/term/terminfo.c:704 msgid "Terminal is visually-ordered UTF-8." msgstr "终端使用视觉排序的 UTF-8。" #: grub-core/term/terminfo.c:706 msgid "Terminal has specified geometry." msgstr "终端具有指定的尺寸。" #. TRANSLATORS: "x" has to be entered in, like an identifier, so please don't #. use better Unicode codepoints. #: grub-core/term/terminfo.c:709 msgid "WIDTHxHEIGHT." msgstr "宽度x高度。" #: grub-core/term/terminfo.c:749 msgid "incorrect terminal dimensions specification" msgstr "不正确的终端尺寸说明符" #: grub-core/term/terminfo.c:779 #, c-format msgid "terminal %s isn't found or it's not handled by terminfo" msgstr "终端 %s 未找到或未被 terminfo 管理" #: grub-core/term/terminfo.c:788 msgid "[[-a|-u|-v] [-g WxH] [TERM] [TYPE]]" msgstr "[[-a|-u|-v] [-g WxH] [终端] [类型]]" #: grub-core/term/terminfo.c:789 msgid "Set terminfo type of TERM to TYPE.\n" msgstr "将 <终端> 的 terminfo 类型设置为指定的 <类型>。\n" #. TRANSLATORS: this is the BLOCK-argument, not #. environment block. #: grub-core/tests/test_blockarg.c:49 msgid "Print and execute block argument." msgstr "输出并执行块参数。" #. TRANSLATORS: We're speaking about bitmap images like #. JPEG or PNG. #: grub-core/video/bitmap.c:216 #, c-format msgid "bitmap file `%s' is of unsupported format" msgstr "位图文件 \"%s\" 的格式不受支持" #: grub-core/video/i386/pc/vbe.c:1191 #, c-format msgid " VBE info: version: %d.%d OEM software rev: %d.%d\n" msgstr " VBE 信息： 版本：%d.%d OEM 软件版本：%d.%d\n" #: grub-core/video/i386/pc/vbe.c:1198 #, c-format msgid " total memory: %d KiB\n" msgstr " 总内存：%d KiB\n" #: grub-core/video/video.c:596 grub-core/video/video.c:762 msgid "no suitable video mode found" msgstr "未找到合适的视频模式" #: include/grub/buffer.h:123 msgid "peek out of range" msgstr "peek 超出范围" #: include/grub/crypto.h:402 msgid "access denied" msgstr "访问被拒绝" #: include/grub/util/install.h:30 include/grub/util/install.h:35 msgid "MODULES" msgstr "模块" #: include/grub/util/install.h:31 msgid "pre-load specified modules MODULES" msgstr "预加载指定的 <模块>" #: include/grub/util/install.h:33 msgid "embed a specific DTB" msgstr "嵌入指定的 " #: include/grub/util/install.h:36 msgid "install only MODULES and their dependencies [default=all]" msgstr "仅安装 <模块> 及其依赖 [默认=全部]" #: include/grub/util/install.h:37 msgid "THEMES" msgstr "主题" #: include/grub/util/install.h:38 #, c-format msgid "install THEMES [default=%s]" msgstr "安装 <主题> [默认=%s]" #: include/grub/util/install.h:39 msgid "FONTS" msgstr "字体" #: include/grub/util/install.h:40 #, c-format msgid "install FONTS [default=%s]" msgstr "安装 <字体> [默认=%s]" #: include/grub/util/install.h:41 msgid "LOCALES" msgstr "区域设置" #: include/grub/util/install.h:42 msgid "install only LOCALES [default=all]" msgstr "仅安装指定的 <区域设置> [默认=全部]" #: include/grub/util/install.h:45 msgid "compress GRUB files [optional]" msgstr "压缩 GRUB 文件 [可选]" #: include/grub/util/install.h:48 util/grub-mkimage.c:83 msgid "choose the compression to use for core image" msgstr "选择核心镜像使用的压缩算法" #. TRANSLATORS: platform here isn't identifier. It can be translated. #: include/grub/util/install.h:51 include/grub/util/install.h:54 #: util/grub-mkimage.c:66 #, c-format msgid "use images and modules under DIR [default=%s/]" msgstr "使用 <目录> 中的镜像和模块 [默认=%s/<平台>]" #: include/grub/util/install.h:57 #, c-format msgid "use translations under DIR [default=%s]" msgstr "使用 <目录> 内的翻译 [默认=%s]" #: include/grub/util/install.h:60 #, c-format msgid "use themes under DIR [default=%s]" msgstr "使用 <目录> 内的主题 [默认=%s]" #: include/grub/util/install.h:65 util/grub-mkimage.c:78 msgid "embed FILE as public key for signature checking" msgstr "嵌入 <文件> 作为签名检查时使用的公钥" #: include/grub/util/install.h:67 util/grub-mkimage.c:84 msgid "SBAT metadata" msgstr "SBAT 元数据" #: include/grub/util/install.h:69 util/grub-mkimage.c:85 msgid "disable shim_lock verifier" msgstr "禁用 shim_lock 验证器" #: util/editenv.c:71 util/grub-editenv.c:207 util/grub-install-common.c:705 #: util/grub-mkimage.c:331 util/setup.c:794 #, c-format msgid "cannot sync `%s': %s" msgstr "无法 sync \"%s\"：%s" #: util/editenv.c:77 #, c-format msgid "cannot rename the file %s to %s" msgstr "无法将文件 %s 重命名为 %s" #: util/editenv.c:94 util/editenv.c:131 #, c-format msgid "cannot rename the file %s to %s: %m" msgstr "无法将文件 %s 重命名为 %s：%m" #: util/getroot.c:402 #, c-format msgid "disk does not exist, so falling back to partition device %s" msgstr "磁盘不存在，因此回退到分区设备 %s" #: util/grub-editenv.c:45 util/grub-fstest.c:512 msgid "Commands:" msgstr "命令：" #: util/grub-editenv.c:47 msgid "Create a blank environment block file." msgstr "创建一个空的环境块文件。" #: util/grub-editenv.c:49 msgid "List the current variables." msgstr "列出当前变量。" #. TRANSLATORS: "set" is a keyword. It's a summary of "set" subcommand. #: util/grub-editenv.c:51 msgid "set [NAME=VALUE ...]" msgstr "set [名称=值 ...]" #: util/grub-editenv.c:52 msgid "Set variables." msgstr "设置变量。" #. TRANSLATORS: "unset" is a keyword. It's a summary of "unset" subcommand. #: util/grub-editenv.c:54 msgid "unset [NAME ...]" msgstr "unset [名称 ...]" #: util/grub-editenv.c:55 msgid "Delete variables." msgstr "删除变量。" #: util/grub-editenv.c:57 msgid "Options:" msgstr "选项：" #: util/grub-editenv.c:84 msgid "You need to specify at least one command.\n" msgstr "您至少需要指定一个命令。\n" #: util/grub-editenv.c:113 msgid "FILENAME COMMAND" msgstr "文件名 命令" #: util/grub-editenv.c:114 msgid "Tool to edit environment block." msgstr "编辑环境块的工具。" #: util/grub-editenv.c:116 #, c-format msgid "" "If FILENAME is `-', the default value %s is used.\n" "\n" "There is no `delete' command; if you want to delete the whole environment\n" "block, use `rm %s'." msgstr "" "如果 <文件名> 为 \"-\"，则使用默认值 %s。\n" "\n" "没有 \"delete\" 命令；如果您想要删除整个环境块，请使用 \"rm %s\"。" #: util/grub-editenv.c:149 #, c-format msgid "cannot get file location `%s': %s" msgstr "无法获得文件位置 \"%s\"：%s" #: util/grub-editenv.c:168 msgid "invalid environment block" msgstr "无效的环境块" #: util/grub-editenv.c:223 #, c-format msgid "invalid parameter %s" msgstr "无效的参数 %s" #: util/grub-editenv.c:228 msgid "environment block too small" msgstr "环境块过小" #: util/grub-fstest.c:107 #, c-format msgid "disk read fails at offset %lld, length %lld" msgstr "读取磁盘失败，偏移量 %lld，长度 %lld" #: util/grub-fstest.c:138 #, c-format msgid "invalid skip value %lld" msgstr "无效的跳过值 %lld" #: util/grub-fstest.c:160 util/grub-fstest.c:246 #, c-format msgid "read error at offset %llu: %s" msgstr "在偏移量 %llu 处发生读取错误：%s" #: util/grub-fstest.c:210 #, c-format msgid "cannot open OS file `%s': %s" msgstr "无法打开操作系统文件 \"%s\"：%s" #: util/grub-fstest.c:225 util/misc.c:126 #, c-format msgid "cannot write to the stdout: %s" msgstr "无法写入至标准输出：%s" #: util/grub-fstest.c:259 #, c-format msgid "compare fail at offset %llu" msgstr "在偏移量 %llu 处比较失败" #: util/grub-fstest.c:280 util/grub-fstest.c:320 #, c-format msgid "OS file %s open error: %s" msgstr "打开操作系统文件 %s 出错：%s" #: util/grub-fstest.c:408 util/grub-mount.c:411 #, c-format msgid "`loopback' command fails: %s" msgstr "\"loopback\" 命令失败：%s" #: util/grub-fstest.c:419 util/grub-mount.c:421 #, c-format msgid "`cryptomount' command fails: %s" msgstr "\"cryptomount\" 命令失败：%s" #: util/grub-fstest.c:480 util/grub-fstest.c:484 msgid "couldn't retrieve UUID" msgstr "无法获取 UUID" #: util/grub-fstest.c:513 msgid "ls PATH" msgstr "ls 路径" #: util/grub-fstest.c:513 msgid "List files in PATH." msgstr "列出 <路径> 中的文件。" #: util/grub-fstest.c:514 msgid "cp FILE LOCAL" msgstr "cp 文件 本地文件" #: util/grub-fstest.c:514 msgid "Copy FILE to local file LOCAL." msgstr "将 <文件> 复制到 <本地文件>。" #: util/grub-fstest.c:515 msgid "cat FILE" msgstr "cat 文件" #: util/grub-fstest.c:515 msgid "Copy FILE to standard output." msgstr "将 <文件> 复制到标准输出。" #: util/grub-fstest.c:516 msgid "cmp FILE LOCAL" msgstr "cmp 文件 本地文件" #: util/grub-fstest.c:516 msgid "Compare FILE with local file LOCAL." msgstr "比较 <文件> 和 <本地文件>。" #: util/grub-fstest.c:517 msgid "hex FILE" msgstr "hex 文件" #: util/grub-fstest.c:517 msgid "Show contents of FILE in hex." msgstr "以十六进制显示 <文件> 的内容。" #: util/grub-fstest.c:518 msgid "crc FILE" msgstr "crc 文件" #: util/grub-fstest.c:518 msgid "Get crc32 checksum of FILE." msgstr "计算 <文件> 的 CRC32 校验和。" #: util/grub-fstest.c:519 msgid "blocklist FILE" msgstr "blocklist 文件" #: util/grub-fstest.c:519 msgid "Display blocklist of FILE." msgstr "显示 <文件> 的块列表。" #: util/grub-fstest.c:520 msgid "xnu_uuid DEVICE" msgstr "xnu_uuid 设备" #: util/grub-fstest.c:520 msgid "Compute XNU UUID of the device." msgstr "计算设备的 XNU UUID。" #. TRANSLATORS: bitmaps are images like e.g. in JPEG. #: util/grub-fstest.c:523 util/grub-fstest.c:524 util/grub-fstest.c:525 #: util/grub-mkfont.c:984 util/grub-mkfont.c:997 util/grub-mkfont.c:998 #: util/grub-mkpasswd-pbkdf2.c:46 util/grub-mkpasswd-pbkdf2.c:47 #: util/grub-mkpasswd-pbkdf2.c:48 msgid "NUM" msgstr "数字" #: util/grub-fstest.c:523 msgid "Skip N bytes from output file." msgstr "跳过输出文件中的 N 字节。" #: util/grub-fstest.c:524 msgid "Handle N bytes in output file." msgstr "处理输出文件中的 N 字节。" #: util/grub-fstest.c:525 msgid "Specify the number of input files." msgstr "指定输入文件个数。" #: util/grub-fstest.c:526 util/grub-mount.c:472 msgid "Set debug environment variable." msgstr "设置调试环境变量。" #: util/grub-fstest.c:527 util/grub-mount.c:473 msgid "Mount crypto devices." msgstr "挂载加密设备。" #. TRANSLATORS: "prompt" is a keyword. #: util/grub-fstest.c:530 util/grub-mount.c:476 msgid "FILE|prompt" msgstr "文件|prompt" #: util/grub-fstest.c:530 util/grub-mount.c:476 msgid "Load zfs crypto key." msgstr "加载 zfs 加密密钥。" #: util/grub-fstest.c:532 msgid "Uncompress data." msgstr "解压数据。" #: util/grub-fstest.c:611 msgid "Invalid disk count.\n" msgstr "无效的磁盘计数。\n" #. TRANSLATORS: disk count is optional but if it's there it must #. be before disk list. So please don't imply disk count as mandatory. #. #: util/grub-fstest.c:619 msgid "Disk count must precede disks list.\n" msgstr "磁盘计数必须位于磁盘列表之前。\n" #: util/grub-fstest.c:639 msgid "No command is specified.\n" msgstr "没有指定命令。\n" #: util/grub-fstest.c:644 msgid "Not enough parameters to command.\n" msgstr "命令的参数数量不够。\n" #: util/grub-fstest.c:717 #, c-format msgid "Invalid command %s.\n" msgstr "无效的命令 %s。\n" #: util/grub-fstest.c:730 msgid "IMAGE_PATH COMMANDS" msgstr "镜像路径 命令" #: util/grub-fstest.c:731 util/grub-mount.c:572 msgid "Debug tool for filesystem driver." msgstr "文件系统驱动程序调试工具。" #: util/grub-glue-efi.c:53 msgid "set input filename for 32-bit part." msgstr "设置 32 位部分的输入文件名。" #: util/grub-glue-efi.c:55 msgid "set input filename for 64-bit part." msgstr "设置 64 位部分的输入文件名。" #: util/grub-glue-efi.c:57 util/grub-mklayout.c:55 util/grub-render-label.c:71 msgid "set output filename. Default is STDOUT" msgstr "设置输出文件名。默认为标准输出" #: util/grub-glue-efi.c:94 util/grub-mklayout.c:476 #: util/grub-mkpasswd-pbkdf2.c:86 util/grub-render-label.c:131 msgid "[OPTIONS]" msgstr "[选项]" #: util/grub-glue-efi.c:95 msgid "Glue 32-bit and 64-bit binary into Apple universal one." msgstr "将 32 位和 64 位的二进制文件拼接成 Apple 通用二进制文件。" #: util/grub-glue-efi.c:116 msgid "Missing input file\n" msgstr "缺少输入文件\n" #: util/grub-install-common.c:127 util/grub-install-common.c:151 #, c-format msgid "cannot copy `%s' to `%s': %s" msgstr "无法复制 \"%s\" 到 \"%s\"：%s" #: util/grub-install-common.c:147 #, c-format msgid "can't compress `%s' to `%s'" msgstr "无法压缩 \"%s\" 到 \"%s\"" #: util/grub-install-common.c:182 util/grub-install-common.c:189 #, c-format msgid "failed to make directory: '%s'" msgstr "无法创建目录：\"%s\"" #: util/grub-install-common.c:239 util/grub-install-common.c:722 #: util/grub-install-common.c:749 util/grub-install-common.c:794 #, c-format msgid "cannot open directory `%s': %s" msgstr "无法打开目录 \"%s\"：%s" #: util/grub-install-common.c:264 #, c-format msgid "cannot backup `%s': %s" msgstr "无法备份 \"%s\"：%s" #: util/grub-install-common.c:274 #, c-format msgid "cannot restore `%s': %s" msgstr "无法恢复 \"%s\"：%s" #: util/grub-install-common.c:281 #, c-format msgid "cannot delete `%s': %s" msgstr "无法删除 \"%s\"：%s" #: util/grub-install-common.c:482 util/grub-mkimage.c:213 msgid "grub-mkimage is compiled without XZ support" msgstr "grubk-mkimage 编译时未启用 XZ 支持" #: util/grub-install-common.c:490 util/grub-mkimage.c:221 #, c-format msgid "Unknown compression format %s" msgstr "未知的压缩格式 %s" #: util/grub-install-common.c:567 #, c-format msgid "Unrecognized compression `%s'" msgstr "无法识别的压缩算法 \"%s\"" #: util/grub-install-common.c:678 #, c-format msgid "unknown target format %s" msgstr "未知的目标格式 %s" #: util/grub-install-common.c:873 #, c-format msgid "cannot find locale `%s'" msgstr "无法找到区域设置 \"%s\"" #: util/grub-install-common.c:1113 #, c-format msgid "%s doesn't exist. Please specify --target or --directory" msgstr "%s 不存在。请指定 --target 或 --directory" #: util/grub-install-common.c:1122 util/grub-install-common.c:1125 #, c-format msgid "invalid modinfo file `%s'" msgstr "无效的 modinfo 文件 \"%s\"" #: util/grub-install-common.c:1140 #, c-format msgid "Unknown platform `%s-%s'" msgstr "未知平台 \"%s-%s\"" #: util/grub-install.c:238 msgid "More than one install device?" msgstr "多于一个安装设备？" #: util/grub-install.c:251 #, c-format msgid "install GRUB images under the directory DIR/%s instead of the %s directory" msgstr "在 <目录>/%s 目录下安装 GRUB 镜像，而不使用 %s 目录" #: util/grub-install.c:256 util/grub-probe.c:734 msgid "TARGET" msgstr "目标" #. TRANSLATORS: "TARGET" as in "target platform". #: util/grub-install.c:258 #, c-format msgid "install GRUB for TARGET platform [default=%s]; available targets: %s" msgstr "为 <目标> 平台安装 GRUB [默认=%s]；可用的目标有：%s" #. TRANSLATORS: "may break" doesn't just mean that option wouldn't have any #. effect but that it will make the resulting install unbootable from HDD. #. TRANSLATORS: The potential breakage isn't limited to floppies but it's #. likely to make the install unbootable from HDD. #: util/grub-install.c:267 util/grub-setup.c:94 msgid "make the drive also bootable as floppy (default for fdX devices). May break on some BIOSes." msgstr "标记驱动器也可作为软驱启动（对于 fdX 设备，此为默认值）。此选项可能在一些 BIOS 上无法正常工作。" #: util/grub-install.c:270 msgid "delete device map if it already exists" msgstr "如果设备映射已存在，则删除它" #: util/grub-install.c:272 util/grub-setup.c:87 msgid "install even if problems are detected" msgstr "即使检测到问题，也继续安装" #: util/grub-install.c:274 msgid "use identifier file even if UUID is available" msgstr "即使 UUID 可用，也仍然使用标识符文件" #: util/grub-install.c:276 msgid "disk module to use (biosdisk or native). This option is only available on BIOS target." msgstr "要使用的磁盘模块（biosdisk 或原生）。此选项仅在 BIOS 目标上可用。" #: util/grub-install.c:279 msgid "don't update the `boot-device'/`Boot*' NVRAM variables. This option is only available on EFI and IEEE1275 targets." msgstr "不要更新 \"boot-device\"/\"Boot*\" NVRAM 变量。此选项仅在 EFI 和 IEEE1275 目标上可用。" #: util/grub-install.c:282 util/grub-setup.c:89 msgid "do not probe for filesystems in DEVICE" msgstr "不要在 <设备> 上探测文件系统" #: util/grub-install.c:284 msgid "do not install bootsector" msgstr "不要安装引导扇区" #: util/grub-install.c:286 util/grub-setup.c:96 msgid "Do not apply any reed-solomon codes when embedding core.img. This option is only available on x86 BIOS targets." msgstr "嵌入 core.img 时，不要应用任何里德-所罗门编码。此选项仅在 x86 BIOS 目标上可用。" #: util/grub-install.c:293 msgid "the installation device is removable. This option is only available on EFI." msgstr "安装设备是可移动的。此选项仅在 EFI 上可用。" #: util/grub-install.c:295 msgid "ID" msgstr "ID" #: util/grub-install.c:296 msgid "the ID of bootloader. This option is only available on EFI and Macs." msgstr "引导加载器的 ID。此选项仅在 EFI 和 Mac 上可用。" #: util/grub-install.c:298 msgid "use DIR as the EFI System Partition root." msgstr "将 <目录> 作为 EFI 系统分区的根。" #: util/grub-install.c:300 msgid "use DIR for PPC MAC install." msgstr "将 <目录> 用于 PPC MAC 的安装。" #: util/grub-install.c:301 util/grub-mkrescue.c:106 msgid "use FILE as font for label" msgstr "将 <文件> 用作标签的字体" #: util/grub-install.c:302 util/grub-mkrescue.c:107 msgid "use COLOR for label" msgstr "标签的 <颜色>" #: util/grub-install.c:303 util/grub-mkrescue.c:108 msgid "use COLOR for label background" msgstr "标签背景的 <颜色>" #: util/grub-install.c:304 util/grub-mkrescue.c:110 msgid "use STRING as product version" msgstr "使用 <字符串> 作为产品版本号" #: util/grub-install.c:371 msgid "[OPTION] [INSTALL_DEVICE]" msgstr "[选项] [安装设备]" #: util/grub-install.c:372 msgid "Install GRUB on your drive." msgstr "在您的驱动器上安装 GRUB。" #: util/grub-install.c:373 #, c-format msgid "" "INSTALL_DEVICE must be system device filename.\n" "%s copies GRUB images into %s. On some platforms, it may also install GRUB into the boot sector." msgstr "" "<安装设备> 必须是系统中的设备文件名。\n" "%s 将 GRUB 镜像复制到 %s。在某些平台上，它还可能会将 GRUB 安装到引导扇区。" #: util/grub-install.c:683 #, c-format msgid "the drive %s is defined multiple times in the device map %s" msgstr "在设备映射 %2$s 中，驱动器 %1$s 被定义了多次" #: util/grub-install.c:841 #, c-format msgid "Unable to open %s: %s" msgstr "无法打开 %s：%s" #: util/grub-install.c:902 msgid "Unable to determine your platform. Use --target." msgstr "无法确定您的平台。请使用 --target。" #: util/grub-install.c:915 #, c-format msgid "Installing for %s platform.\n" msgstr "正在为 %s 平台进行安装。\n" #: util/grub-install.c:964 msgid "install device isn't specified" msgstr "未指定安装设备" #: util/grub-install.c:1098 msgid "cannot find EFI directory" msgstr "无法找到 EFI 目录" #: util/grub-install.c:1101 util/grub-install.c:1261 util/grub-install.c:1306 #: util/grub-macbless.c:76 util/grub-probe.c:329 util/setup.c:320 #, c-format msgid "cannot find a device for %s (is /dev mounted?)" msgstr "无法找到 %s 的设备（/dev 是否已挂载？）" #: util/grub-install.c:1110 util/grub-install.c:1269 util/grub-install.c:1322 #: util/grub-install.c:1417 util/grub-macbless.c:80 util/grub-probe.c:372 #, c-format msgid "cannot find a GRUB drive for %s. Check your device.map" msgstr "无法找到 %s 对应的 GRUB 驱动器。请检查您的 device.map" #: util/grub-install.c:1130 #, c-format msgid "%s doesn't look like an EFI partition, system may not boot" msgstr "%s 看起来不像是一个 EFI 分区，系统可能无法启动" #: util/grub-install.c:1132 #, c-format msgid "%s doesn't look like an EFI partition" msgstr "%s 看起来不像是一个 EFI 分区" #: util/grub-install.c:1178 util/grub-install.c:1668 msgid "You've found a bug" msgstr "您发现了一个 bug" #: util/grub-install.c:1283 #, c-format msgid "filesystem on %s is neither HFS nor HFS+" msgstr "%s 上的文件系统既非 HFS 也非 HFS+" #: util/grub-install.c:1351 #, c-format msgid "attempt to install to encrypted disk without cryptodisk enabled. Set `%s' in file `%s'" msgstr "试图安装到加密磁盘，但未启用 cryptodisk。请在文件 \"%2$s\" 中设置 \"%1$s\"" #: util/grub-install.c:1462 util/grub-install.c:1838 util/grub-install.c:1943 #, c-format msgid "Can't create file: %s" msgstr "无法创建文件：%s" #: util/grub-install.c:1544 msgid "no hints available for your platform. Expect reduced performance" msgstr "您的平台无提示可用。性能可能会降低" #. TRANSLATORS: This is a prefix in the log to indicate that usually #. a command would be executed but due to an option was skipped. #: util/grub-install.c:1757 msgid "NOT RUNNING: " msgstr "未执行：" #: util/grub-install.c:1874 msgid "the chosen partition is not a PReP partition" msgstr "选择的分区不是一个 PReP 分区" #: util/grub-install.c:1879 msgid "failed to copy Grub to the PReP partition" msgstr "无法将 Grbu 复制到 PReP 分区" #: util/grub-install.c:1885 #, c-format msgid "the PReP partition is not empty. If you are sure you want to use it, run dd to clear it: `%s'" msgstr "PReP 分区不为空。如果您确实想要使用它，请执行 dd 来清空它：\"%s\"" #: util/grub-install.c:1961 util/grub-install.c:2009 #, c-format msgid "efibootmgr failed to register the boot entry: %s" msgstr "efibootmgr 无法注册启动项：%s" #: util/grub-install.c:1993 msgid "EFI bootloader id isn't specified." msgstr "未指定 EFI bootloader id。" #: util/grub-install.c:2027 msgid "WARNING: no platform-specific install was performed" msgstr "警告：未执行任何与平台相关的安装" #: util/grub-install.c:2042 msgid "Installation finished. No error reported." msgstr "安装完成。没有报告错误。" #: util/grub-macbless.c:101 msgid "bless for x86-based macs" msgstr "针对基于 x86 的 Mac 的 bless" #: util/grub-macbless.c:103 msgid "bless for ppc-based macs" msgstr "针对基于 ppc 的 Mac 的 bless" #: util/grub-macbless.c:136 util/grub-probe.c:824 msgid "No path or device is specified.\n" msgstr "未指定路径或设备。\n" #: util/grub-macbless.c:157 msgid "--ppc PATH|--x86 FILE" msgstr "--ppc 路径|--x86 文件" #: util/grub-macbless.c:158 msgid "Mac-style bless on HFS or HFS+" msgstr "在 HFS 或 HFS+ 上进行 Mac 风格的 bless" #: util/grub-menulst2cfg.c:44 #, c-format msgid "Usage: %s [INFILE [OUTFILE]]\n" msgstr "用法：%s [输入文件 [输出文件]]\n" #: util/grub-mkfont.c:162 #, c-format msgid "Freetype Error %d loading glyph 0x%x for U+0x%x%s" msgstr "为 U+0x%3$x%4$s 加载字形 0x%2$x 时遇到了 Freetype 错误 %1$d" #. TRANSLATORS: These qualifiers are used for cursive typography, #. mainly Arabic. Note that the terms refer to the visual position #. and not logical order and if used in left-to-right script then #. leftmost is initial but with right-to-left script like Arabic #. rightmost is the initial. #: util/grub-mkfont.c:170 msgid " (medial)" msgstr "（中间）" #: util/grub-mkfont.c:171 msgid " (leftmost)" msgstr "（最左）" #: util/grub-mkfont.c:172 msgid " (rightmost)" msgstr "（最右）" #: util/grub-mkfont.c:486 #, c-format msgid "Out of range substitution (%d, %u)\n" msgstr "超出范围的替换 (%d, %u)\n" #. TRANSLATORS: "lookup" is taken directly from font specifications #. which are formulated as "Under condition X replace LOOKUP with #. SUBSTITUITION". " #: util/grub-mkfont.c:517 #, c-format msgid "Out of range lookup: %d\n" msgstr "超出范围的查找：%d\n" #: util/grub-mkfont.c:525 #, c-format msgid "Unsupported substitution type: %d\n" msgstr "不支持的替换类型：%d\n" #: util/grub-mkfont.c:566 #, c-format msgid "Unsupported substitution specification: %u\n" msgstr "不支持的替换说明符：%u\n" #. TRANSLATORS: It refers to the range of characters in font. #: util/grub-mkfont.c:600 util/grub-mkfont.c:1105 util/grub-mkfont.c:1121 msgid "invalid font range" msgstr "无效的字体范围" #: util/grub-mkfont.c:613 #, c-format msgid "Unsupported coverage specification: %u\n" msgstr "不支持的覆盖范围说明符：%u\n" #: util/grub-mkfont.c:665 #, c-format msgid "WARNING: unsupported font feature parameters: %x\n" msgstr "警告：不支持的字体特性参数：%x\n" #: util/grub-mkfont.c:982 util/grub-mkrescue.c:98 util/grub-mkstandalone.c:48 #: util/grub-kbdcomp.in:29 msgid "save output in FILE [required]" msgstr "将输出保存到 <文件> [必需]" #. TRANSLATORS: some font files may have multiple faces (fonts). #. This option is used to chose among them, the first face being '0'. #. Rarely used. #: util/grub-mkfont.c:988 msgid "select face index" msgstr "选择字体索引编号" #: util/grub-mkfont.c:989 msgid "FROM-TO[,FROM-TO]" msgstr "起始-终止[,起始-终止]" #. TRANSLATORS: It refers to the range of characters in font. #: util/grub-mkfont.c:991 msgid "set font range" msgstr "设置字体范围" #: util/grub-mkfont.c:992 msgid "NAME" msgstr "名称" #. TRANSLATORS: "family name" for font is just a generic name without suffix #. like "Bold". #: util/grub-mkfont.c:995 msgid "set font family name" msgstr "设置字体族名称" #: util/grub-mkfont.c:996 msgid "SIZE" msgstr "大小" #: util/grub-mkfont.c:996 msgid "set font size" msgstr "设置字体大小" #: util/grub-mkfont.c:997 msgid "set font descent" msgstr "设置字体的 descent" #: util/grub-mkfont.c:998 msgid "set font ascent" msgstr "设置字体的 ascent" #: util/grub-mkfont.c:999 msgid "convert to bold font" msgstr "转换为粗体" #: util/grub-mkfont.c:1000 msgid "force autohint" msgstr "强制 autohint" #: util/grub-mkfont.c:1001 msgid "disable hinting" msgstr "禁用 hinting" #. TRANSLATORS: some fonts contain bitmap rendering for #. some sizes. This option forces rerendering even if #. pre-rendered bitmap is available. #. #: util/grub-mkfont.c:1007 msgid "ignore bitmap strikes when loading" msgstr "加载时忽略点阵" #: util/grub-mkfont.c:1197 msgid "[OPTIONS] FONT_FILES" msgstr "[选项] 字体文件" #: util/grub-mkfont.c:1198 msgid "Convert common font file formats into PF2" msgstr "将通用字体文件格式转换为 PF2 格式" #: util/grub-mkfont.c:1228 util/grub-mkrescue.c:503 #: util/grub-mkstandalone.c:306 util/grub-kbdcomp.in:70 msgid "output file must be specified" msgstr "必须指定输出文件" #: util/grub-mkfont.c:1231 msgid "FT_Init_FreeType fails" msgstr "FT_Init_FreeType 失败" #: util/grub-mkfont.c:1245 #, c-format msgid "can't open file %s, index %d: error %d" msgstr "无法打开文件 %s，索引 %d：错误 %d" #: util/grub-mkfont.c:1275 #, c-format msgid "can't set %dx%d font size: Freetype error %d: %s" msgstr "无法设置 %dx%d 字体大小：Freetype 错误 %d：%s" #: util/grub-mkimage.c:67 msgid "set prefix directory" msgstr "设置前缀目录" #. TRANSLATORS: "memdisk" here isn't an identifier, it can be translated. #. "embed" is a verb (command description). " #: util/grub-mkimage.c:71 msgid "" "embed FILE as a memdisk image\n" "Implies `-p (memdisk)/boot/grub' and overrides any prefix supplied previously, but the prefix itself can be overridden by later options" msgstr "" "将 <文件> 作为 memdisk 镜像进行嵌入\n" "隐含启用 \"-p (memdisk)/boot/grub\"，并且覆盖所有之前提供的前缀，但此前缀本身可以被后续的选项覆盖" #: util/grub-mkimage.c:74 msgid "embed FILE as a device tree (DTB)\n" msgstr "将 <文件> 作为设备树 (DTB) 进行嵌入\n" #: util/grub-mkimage.c:76 msgid "embed FILE as an early config" msgstr "将 <文件> 作为早期配置文件进行嵌入" #. TRANSLATORS: NOTE is a name of segment. #: util/grub-mkimage.c:80 msgid "add NOTE segment for CHRP IEEE1275" msgstr "为 CHRP IEEE1275 添加 NOTE 段" #: util/grub-mkimage.c:81 msgid "output a generated image to FILE [default=stdout]" msgstr "将生成的镜像输出到 <文件> [默认=标准输出]" #: util/grub-mkimage.c:82 msgid "FORMAT" msgstr "格式" #: util/grub-mkimage.c:102 util/grub-mkstandalone.c:62 msgid "generate an image in FORMAT" msgstr "以指定 <格式> 生成镜像" #: util/grub-mkimage.c:103 util/grub-mkstandalone.c:63 msgid "available formats:" msgstr "可用的格式：" #: util/grub-mkimage.c:156 util/grub-mkstandalone.c:96 #, c-format msgid "unknown target format %s\n" msgstr "未知的目标格式 %s\n" #: util/grub-mkimage.c:257 msgid "[OPTION]... [MODULES]" msgstr "[选项]... [模块]" #: util/grub-mkimage.c:258 msgid "Make a bootable image of GRUB." msgstr "生成 GRUB 可引导镜像。" #: util/grub-mkimage.c:288 util/grub-mkstandalone.c:309 msgid "Target format not specified (use the -O option)." msgstr "未指定目标格式（使用 -O 选项）。" #: util/grub-mkimage.c:297 msgid "Prefix not specified (use the -p option)." msgstr "未指定前缀（使用 -p 选项）。" #: util/grub-mkimage.c:334 util/setup.c:796 #, c-format msgid "cannot close `%s': %s" msgstr "无法关闭 \"%s\"：%s" #: util/grub-mkimagexx.c:2320 #, c-format msgid "`%s' is miscompiled: its start address is 0x%llx instead of 0x%llx: ld.gold bug?" msgstr "\"%s\" 编译时有误：其起始地址为 0x%llx 而非 0x%llx：可能是 ld.gold 的 bug？" #: util/grub-mklayout.c:53 msgid "set input filename. Default is STDIN" msgstr "设置输入文件名。默认为标准输入" #. TRANSLATORS: scan identifier is keyboard key symbolic name. #: util/grub-mklayout.c:307 #, c-format msgid "Unknown keyboard scan identifier %s\n" msgstr "未知的键盘扫描标识符 %s\n" #. TRANSLATORS: scan code is keyboard key numeric identifier. #: util/grub-mklayout.c:390 util/grub-mklayout.c:418 #, c-format msgid "Unknown keyboard scan code 0x%02x\n" msgstr "未知的键盘扫描码 0x%02x\n" #. TRANSLATORS: this error is triggered when input doesn't contain any #. key descriptions. #: util/grub-mklayout.c:438 msgid "ERROR: no valid keyboard layout found. Check the input.\n" msgstr "错误：未找到有效的键盘布局。请检查输入。\n" #. TRANSLATORS: "one" is a shortcut for "keyboard layout". #: util/grub-mklayout.c:478 msgid "Generate GRUB keyboard layout from Linux console one." msgstr "根据 Linux 控制台键盘布局生成 GRUB 键盘布局。" #: util/grub-mknetdir.c:47 msgid "root directory of TFTP server" msgstr "TFTP 服务器的根目录" #: util/grub-mknetdir.c:49 msgid "relative subdirectory on network server" msgstr "网络服务器上的相对子目录" #: util/grub-mknetdir.c:88 msgid "Prepares GRUB network boot images at net_directory/subdir assuming net_directory being TFTP root." msgstr "假定 网络目录 是 TFTP 的根目录，准备位于 网络目录/子目录 的 GRUB 网络引导镜像。" #: util/grub-mknetdir.c:147 #, c-format msgid "unsupported platform %s" msgstr "不支持的平台 %s" #. TRANSLATORS: First %s is replaced by platform name. Second one by filename. #: util/grub-mknetdir.c:169 #, c-format msgid "Netboot directory for %s created. Configure your DHCP server to point to %s\n" msgstr "已创建用于 %s 的网络引导目录。请配置您的 DHCP 服务器以指向 %s\n" #: util/grub-mkpasswd-pbkdf2.c:46 msgid "Number of PBKDF2 iterations" msgstr "PBKDF2 迭代次数" #: util/grub-mkpasswd-pbkdf2.c:47 msgid "Length of generated hash" msgstr "生成哈希串的长度" #: util/grub-mkpasswd-pbkdf2.c:48 msgid "Length of salt" msgstr "盐的长度" #: util/grub-mkpasswd-pbkdf2.c:87 msgid "Generate PBKDF2 password hash." msgstr "生成 PBKDF2 密码哈希。" #: util/grub-mkpasswd-pbkdf2.c:144 util/grub-mkpasswd-pbkdf2.c:151 msgid "failure to read password" msgstr "读取密码失败" #: util/grub-mkpasswd-pbkdf2.c:146 msgid "Reenter password: " msgstr "重新输入口令：" #: util/grub-mkpasswd-pbkdf2.c:160 msgid "passwords don't match" msgstr "密码不匹配" #: util/grub-mkpasswd-pbkdf2.c:169 msgid "couldn't retrieve random data for salt" msgstr "无法为盐获取随机数据" #: util/grub-mkpasswd-pbkdf2.c:184 #, c-format msgid "cryptographic error number %d" msgstr "加密错误编号 %d" #: util/grub-mkpasswd-pbkdf2.c:203 #, c-format msgid "PBKDF2 hash of your password is %s\n" msgstr "您的密码的 PBKDF2 哈希为 %s\n" #: util/grub-mkrelpath.c:67 msgid "No path is specified.\n" msgstr "没有指定路径。\n" #: util/grub-mkrelpath.c:78 msgid "PATH" msgstr "路径" #: util/grub-mkrelpath.c:79 msgid "Transform a system filename into GRUB one." msgstr "将系统文件名转换为 GRUB 文件名。" #: util/grub-mkrescue.c:100 msgid "save ROM images in DIR [optional]" msgstr "将 ROM 镜像保存在 <目录> [可选]" #. TRANSLATORS: xorriso is a program for creating ISOs and burning CDs. #: util/grub-mkrescue.c:103 msgid "use FILE as xorriso [optional]" msgstr "使用 <文件> 作为 xorriso [可选]" #: util/grub-mkrescue.c:109 msgid "use STRING as product name" msgstr "将 <字符串> 作为产品名称" #: util/grub-mkrescue.c:111 msgid "enable sparc boot. Disables HFS+, APM, ARCS and boot as disk image for i386-pc" msgstr "启用 sparc 引导。禁用 HFS+、APM、ARCS 和引导 i386-pc 磁盘镜像的功能" #: util/grub-mkrescue.c:112 msgid "enable ARCS (big-endian mips machines, mostly SGI) boot. Disables HFS+, APM, sparc64 and boot as disk image for i386-pc" msgstr "启用 ARCS（大端序 mips 机器，主要是 SGI）引导。禁用 HFS+、APM、sparc64 和引导 i386-pc 磁盘镜像的功能" #. TRANSLATORS: it generates one single image which is bootable through any method. #: util/grub-mkrescue.c:125 msgid "Make GRUB CD-ROM, disk, pendrive and floppy bootable image." msgstr "制作可从 CD-ROM、磁盘、U 盘和软盘引导的 GRUB 镜像。" #: util/grub-mkrescue.c:130 #, c-format msgid "Generates a bootable CD/USB/floppy image. Arguments other than options to this program are passed to xorriso, and indicate source files, source directories, or any of the mkisofs options listed by the output of `%s'." msgstr "生成可引导的 CD/USB/软盘镜像。除了此程序的选项外，其他参数会被传递到 xorisso，可以用于指定源文件、源目录，或任何 mkisofs 选项，详细列表见 \"%s\" 的输出。" #: util/grub-mkrescue.c:134 msgid "Option -- switches to native xorriso command mode." msgstr "选项 -- 切换至原生 xorriso 命令模式。" #: util/grub-mkrescue.c:135 msgid "Mail xorriso support requests to ." msgstr "请将 xorriso 的支持请求发送至 。" #: util/grub-mkrescue.c:221 util/grub-mkstandalone.c:114 msgid "[OPTION] SOURCE..." msgstr "[选项] 源..." #: util/grub-mkrescue.c:258 util/grub-mkrescue.c:320 util/grub-mkrescue.c:612 #, c-format msgid "enabling %s support ..." msgstr "正在启用 %s 支持 ..." #: util/grub-mkrescue.c:506 msgid "xorriso not found" msgstr "未找到 xorriso" #: util/grub-mkrescue.c:647 msgid "Your xorriso doesn't support `--grub2-boot-info'. Some features are disabled. Please use xorriso 1.2.9 or later." msgstr "您的 xorriso 不支持 \"--grub2-boot-info\"。某些功能已禁用。请使用 xorriso 1.2.9 或更新版本。" #: util/grub-mkrescue.c:674 msgid "Your xorriso doesn't support `--grub2-boot-info'. Your core image is too big. Boot as disk is disabled. Please use xorriso 1.2.9 or later." msgstr "您的 xorriso 不支持 \"--grub2-boot-info\"。您的核心镜像过大。作为磁盘进行引导的功能已禁用。请使用 xorriso 1.2.9 或更新版本。" #: util/grub-mkstandalone.c:115 msgid "Generate a standalone image (containing all modules) in the selected format" msgstr "以所选格式生成一个独立镜像（包含全部模块）" #: util/grub-mkstandalone.c:115 msgid "Graft point syntax (E.g. /boot/grub/grub.cfg=./grub.cfg) is accepted" msgstr "支持 graft point 语法（例如 /boot/grub/grub.cfg=./grub.cfg）" #: util/grub-mount.c:571 msgid "IMAGE1 [IMAGE2 ...] MOUNTPOINT" msgstr "镜像1 [镜像2 ...] 挂载点" #: util/grub-mount.c:594 msgid "need an image and mountpoint" msgstr "需要一个镜像和挂载点" #: util/grub-probe.c:731 msgid "given argument is a system device, not a path" msgstr "所给的参数是一个系统设备，不是路径" #: util/grub-probe.c:736 msgid "print verbose messages (pass twice to enable debug printing)." msgstr "输出详细信息（使用两次以启用调试输出）" #: util/grub-probe.c:737 msgid "separate items in output using ASCII NUL characters" msgstr "使用 ASCII NUL 字符分隔输出中的各项" #: util/grub-probe.c:755 #, c-format msgid "[default=%s]" msgstr "[默认=%s]" #: util/grub-probe.c:757 msgid "print TARGET" msgstr "输出 <目标>" #: util/grub-probe.c:758 msgid "available targets:" msgstr "可用的目标：" #: util/grub-probe.c:840 msgid "[OPTION]... [PATH|DEVICE]" msgstr "[选项]... [路径|设备]" #: util/grub-probe.c:841 msgid "Probe device information for a given path (or device, if the -d option is given)." msgstr "探测指定路径（如使用了 -d 选项，则探测指定设备）的设备信息。" #: util/grub-render-label.c:60 msgid "read text from FILE." msgstr "从 <文件> 读取文本。" #: util/grub-render-label.c:62 msgid "use COLOR for text" msgstr "字体的 <颜色>" #: util/grub-render-label.c:64 msgid "use COLOR for background" msgstr "背景的 <颜色>" #. TRANSLATORS: The result is always stored to file and #. never shown directly, so don't use "show" as synonym for render. Use "create" if #. "render" doesn't translate directly. #: util/grub-render-label.c:69 msgid "set the label to render" msgstr "设置要创建的标签" #: util/grub-render-label.c:73 msgid "use FILE as font (PF2)." msgstr "使用 <文件> 作为字体（PF2）。" #. TRANSLATORS: This file takes a text and creates a graphical representation of it, #. putting the result into .disk_label file. The result is always stored to file and #. never shown directly, so don't use "show" as synonym for render. Use "create" if #. "render" doesn't translate directly. #: util/grub-render-label.c:136 msgid "Render Apple .disk_label." msgstr "创建 Apple .disk_label。" #: util/grub-render-label.c:158 util/grub-syslinux2cfg.c:169 msgid "Missing arguments\n" msgstr "缺少参数\n" #: util/grub-script-check.c:87 msgid "[PATH]" msgstr "[路径]" #: util/grub-script-check.c:88 msgid "Checks GRUB script configuration file for syntax errors." msgstr "检查 GRUB 脚本配置文件中的语法错误。" #: util/grub-script-check.c:207 #, c-format msgid "Syntax error at line %u\n" msgstr "%u 行存在语法错误\n" #: util/grub-script-check.c:212 #, c-format msgid "Script `%s' contains no commands and will do nothing\n" msgstr "脚本 \"%s\" 没有包含任何命令，什么都不会做\n" #: util/grub-setup.c:79 #, c-format msgid "use FILE as the boot image [default=%s]" msgstr "使用 <文件> 作为引导镜像 [默认=%s]" #: util/grub-setup.c:81 #, c-format msgid "use FILE as the core image [default=%s]" msgstr "使用 <文件> 作为核心镜像 [默认=%s]" #: util/grub-setup.c:210 msgid "No device is specified.\n" msgstr "没有指定设备。\n" #: util/grub-setup.c:224 msgid "" "Set up images to boot from DEVICE.\n" "\n" "You should not normally run this program directly. Use grub-install instead." msgstr "" "设置从指定 <设备> 引导所使用的镜像。\n" "\n" "您通常不应直接使用此程序，请换用 grub-install。" #: util/grub-setup.c:228 msgid "DEVICE must be an OS device (e.g. /dev/sda)." msgstr "<设备> 必须是一个操作系统设备（例如 /dev/sda）。" #: util/grub-setup.c:297 #, c-format msgid "Invalid device `%s'.\n" msgstr "无效的设备 \"%s\"。\n" #: util/grub-syslinux2cfg.c:64 msgid "root directory as it will be seen on runtime [default=/]." msgstr "运行时将看到的根目录路径 [默认=/]。" #: util/grub-syslinux2cfg.c:69 msgid "current directory of syslinux as it will be seen on runtime [default is parent directory of input file]." msgstr "运行时将看到的 syslinux 当前目录路径 [默认值为输入文件的父目录]。" #: util/grub-syslinux2cfg.c:74 msgid "write output to FILE [default=stdout]." msgstr "将输出写到 <文件> [默认=标准输出]" #: util/grub-syslinux2cfg.c:148 msgid "Transform syslinux config into GRUB one." msgstr "将 syslinux 配置转换为 GRUB 配置。" #: util/mkimage.c:704 util/mkimage.c:733 util/mkimage.c:750 msgid "cannot compress the kernel image" msgstr "无法压缩内核镜像" #: util/mkimage.c:782 util/mkimage.c:1157 #, c-format msgid "unknown compression %d" msgstr "未知的压缩算法 %d" #: util/mkimage.c:849 #, c-format msgid "section name %s length is bigger than %lu" msgstr "区段名 %s 的长度大于 %lu" #: util/mkimage.c:946 msgid ".sbat section can be embedded into EFI images only" msgstr ".sbat 区段只能被嵌入到 EFI 镜像" #: util/mkimage.c:1168 msgid "Decompressor is too big" msgstr "解压器过大" #: util/mkimage.c:1213 #, c-format msgid "core image is too big (0x%x > 0x%x)" msgstr "核心镜像过大 (0x%x > 0x%x)" #: util/mkimage.c:1220 #, c-format msgid "kernel image is too big (0x%x > 0x%x)" msgstr "内核镜像过大 (0x%x > 0x%x)" #: util/mkimage.c:1300 util/mkimage.c:1569 #, c-format msgid "diskboot.img size must be %u bytes" msgstr "diskboot.img 的大小必须为 %u 字节" #: util/mkimage.c:1639 msgid "fwstart.img doesn't match the known good version. proceed at your own risk" msgstr "fwstart.img 和已知正常工作的版本不匹配。继续操作需要您自行承担风险" #: util/mkimage.c:1643 util/mkimage.c:1669 msgid "firmware image is too big" msgstr "固件镜像过大" #: util/resolve.c:93 #, c-format msgid "invalid line format: %s" msgstr "无效的行格式：%s" #: util/resolve.c:132 #, c-format msgid "line too long, length greater than %zu: module %s" msgstr "行过长，长度大于 %zu：模块 %s" #: util/setup.c:167 msgid "the first sector of the core file is not sector-aligned" msgstr "核心文件的第一扇区未对齐到扇区" #: util/setup.c:177 msgid "non-sector-aligned data is found in the core file" msgstr "核心文件中发现未对齐到扇区的数据" #: util/setup.c:199 msgid "the sectors of the core file are too fragmented" msgstr "核心文件的扇区碎片太多" #: util/setup.c:284 #, c-format msgid "the size of `%s' is not %u" msgstr "\"%s\" 的大小不是 %u" #: util/setup.c:294 #, c-format msgid "the size of `%s' is too small" msgstr "\"%s\" 的大小太小" #: util/setup.c:432 msgid "Attempting to install GRUB to a disk with multiple partition labels or both partition label and filesystem. This is not supported yet." msgstr "正在试图将 GRUB 安装至有多个分区标签的磁盘，或同时有分区标签和文件系统的磁盘。这样的操作尚未被支持。" #: util/setup.c:445 #, c-format msgid "unable to identify a filesystem in %s; safety check can't be performed" msgstr "无法在 %s 中识别文件系统；无法执行安全性检测" #. TRANSLATORS: Filesystem may reserve the space just GRUB isn't sure about it. #: util/setup.c:449 #, c-format msgid "%s appears to contain a %s filesystem which isn't known to reserve space for DOS-style boot. Installing GRUB there could result in FILESYSTEM DESTRUCTION if valuable data is overwritten by grub-setup (--skip-fs-probe disables this check, use at your own risk)" msgstr "%s 中似乎包含一个 %s 文件系统，此类型的文件系统可能不会为 DOS 风格的引导保留空间。在此处安装 GRUB 可能导致 grub-setup 覆盖重要数据从而损坏文件系统（--skip-fs-probe 参数可以禁用这个检查，使用该选项风险自负）" #. TRANSLATORS: Partition map may reserve the space just GRUB isn't sure about it. #: util/setup.c:462 #, c-format msgid "%s appears to contain a %s partition map which isn't known to reserve space for DOS-style boot. Installing GRUB there could result in FILESYSTEM DESTRUCTION if valuable data is overwritten by grub-setup (--skip-fs-probe disables this check, use at your own risk)" msgstr "%s 中似乎包含一个 %s 分区映射，此类型的分区映射可能不会为 DOS 风格的引导保留空间。在此处安装 GRUB 可能导致 grub-setup 覆盖重要数据从而损坏文件系统（--skip-fs-probe 参数可以禁用这个检查，使用该选项风险自负）" #: util/setup.c:469 #, c-format msgid "%s appears to contain a %s partition map and LDM which isn't known to be a safe combination. Installing GRUB there could result in FILESYSTEM DESTRUCTION if valuable data is overwritten by grub-setup (--skip-fs-probe disables this check, use at your own risk)" msgstr "%s 中似乎包含一个 %s 分区映射以及 LDM，这两者的组合可能不安全。在此处安装 GRUB 可能导致 grub-setup 覆盖重要数据从而损坏文件系统（--skip-fs-probe 参数可以禁用这个检查，使用该选项风险自负）" #: util/setup.c:482 msgid "Attempting to install GRUB to a partitionless disk or to a partition. This is a BAD idea." msgstr "正在试图将 GRUB 安装至未分区的磁盘或一个分区。这是一个坏主意。" #: util/setup.c:487 msgid "Attempting to install GRUB to a disk with multiple partition labels. This is not supported yet." msgstr "正在试图将 GRUB 安装至有多个分区标签的磁盘。这样的操作尚未被支持。" #: util/setup.c:493 #, c-format msgid "Partition style `%s' doesn't support embedding" msgstr "\"%s\" 分区风格不支持嵌入" #: util/setup.c:500 #, c-format msgid "File system `%s' doesn't support embedding" msgstr "文件系统 \"%s\" 不支持嵌入" #: util/setup.c:541 msgid "Your embedding area is unusually small. core.img won't fit in it." msgstr "您的嵌入区域过小，无法装入 core.img。" #: util/setup.c:563 util/setup.c:729 util/setup.c:847 msgid "no terminator in the core image" msgstr "核心镜像中没有终止符" #: util/setup.c:626 msgid "core.img version mismatch" msgstr "core.img 版本不匹配" #: util/setup.c:679 msgid "embedding is not possible, but this is required for RAID and LVM install" msgstr "无法嵌入，但这在 RAID 和 LVM 安装中是必须的" #: util/setup.c:686 #, c-format msgid "can't determine filesystem on %s" msgstr "无法确定 %s 上的文件系统" #: util/setup.c:689 #, c-format msgid "filesystem `%s' doesn't support blocklists" msgstr "文件系统 \"%s\" 不支持块列表" #. TRANSLATORS: cross-disk refers to /boot being on one disk #. but MBR on another. #: util/setup.c:698 msgid "embedding is not possible, but this is required for cross-disk install" msgstr "无法嵌入，但这在跨盘安装中是必须的" #: util/setup.c:704 msgid "Embedding is not possible. GRUB can only be installed in this setup by using blocklists. However, blocklists are UNRELIABLE and their use is discouraged." msgstr "无法嵌入。在此次安装中 GRUB 只能通过使用块列表安装。但是块列表是不可靠的，不推荐使用。" #. TRANSLATORS: Here GRUB refuses to continue with blocklist install. #: util/setup.c:709 msgid "will not proceed with blocklists" msgstr "已停止使用块列表进行安装" #: util/setup.c:820 util/setup.c:840 msgid "blocklists are invalid" msgstr "块列表无效" #: util/setup.c:850 msgid "blocklists are incomplete" msgstr "块列表不完整" #: util/grub-kbdcomp.in:24 msgid "Usage: %s -o OUTPUT CKBMAP_ARGUMENTS...\\n" msgstr "用法：%s -o 输出 CKBMAP参数...\\n" #: util/grub-kbdcomp.in:25 msgid "Make GRUB keyboard layout file." msgstr "生成 GRUB 键盘布局文件。" #: util/grub-kbdcomp.in:27 util/grub-mkconfig.in:61 util/grub-reboot.in:51 #: util/grub-set-default.in:51 msgid "print this message and exit" msgstr "输出本信息并退出" #: util/grub-kbdcomp.in:28 util/grub-mkconfig.in:62 util/grub-reboot.in:52 #: util/grub-set-default.in:52 msgid "print the version information and exit" msgstr "输出版本信息并退出" #: util/grub-kbdcomp.in:31 msgid "%s generates a keyboard layout for GRUB using ckbcomp\\n" msgstr "%s 使用 ckbcomp 生成 GRUB 使用的键盘布局" #: util/grub-kbdcomp.in:33 util/grub-mkconfig.in:64 util/grub-reboot.in:64 #: util/grub-set-default.in:58 msgid "Report bugs to ." msgstr "请将问题与缺陷报告至 。" #: util/grub-kbdcomp.in:41 util/grub-mkconfig.in:72 util/grub-reboot.in:72 #: util/grub-set-default.in:66 msgid "%s: option requires an argument -- `%s'\\n" msgstr "%s: 选项需要一个参数 -- \"%s\"\\n" #: util/grub-mkconfig.in:57 msgid "Usage: %s [OPTION]\\n" msgstr "用法：%s [选项]\\n" #: util/grub-mkconfig.in:58 msgid "Generate a grub config file" msgstr "生成一个 grub 配置文件" #: util/grub-mkconfig.in:60 msgid "output generated config to FILE [default=stdout]" msgstr "将生成的配置输出到指定 <文件> [默认=标准输出]" #: util/grub-mkconfig.in:97 util/grub-reboot.in:104 #: util/grub-set-default.in:98 msgid "Unrecognized option `%s'\\n" msgstr "无法识别的选项 \"%s\"\\n" #: util/grub-mkconfig.in:121 msgid "%s: You must run this as root\\n" msgstr "%s: 您必须以 root 身份运行该程序\\n" #: util/grub-mkconfig.in:130 msgid "%s: Not found.\\n" msgstr "%s: 未找到。\\n" #: util/grub-mkconfig.in:266 msgid "Generating grub configuration file ..." msgstr "正在生成 grub 配置文件 ..." #. TRANSLATORS: %s is replaced by filename #: util/grub-mkconfig.in:299 msgid "" "Syntax errors are detected in generated GRUB config file.\n" "Ensure that there are no errors in /etc/default/grub\n" "and /etc/grub.d/* files or please file a bug report with\n" "%s file attached." msgstr "" "生成的 GRUB 配置文件中检测到了语法错误。\n" "请确保 /etc/default/grub 和 /etc/grub/*\n" "文件中没有错误，或者请提交一个缺陷报告并\n" "将 %s 文件作为附件。" #: util/grub-mkconfig.in:315 msgid "done" msgstr "完成" #: util/grub-mkconfig_lib.in:47 msgid "Warning:" msgstr "警告：" #: util/grub-reboot.in:49 util/grub-set-default.in:47 msgid "Usage: %s [OPTION] MENU_ENTRY\\n" msgstr "用法：%s [选项] 菜单项\\n" #: util/grub-reboot.in:50 msgid "Set the default boot menu entry for GRUB, for the next boot only." msgstr "设置 GRUB 默认引导菜单项（仅对下一次启动有效）" #: util/grub-reboot.in:53 util/grub-set-default.in:53 msgid "expect GRUB images under the directory DIR/%s instead of the %s directory" msgstr "将 GRUB 镜像安装到 <目录>/%s 下，而不是 %s 目录" #: util/grub-reboot.in:56 msgid "" "MENU_ENTRY is a number, a menu item title or a menu item identifier. Please note that menu items in\n" "submenus or sub-submenus require specifying the submenu components and then the\n" "menu item component. The titles should be separated using the greater-than\n" "character (>) with no extra spaces. Depending on your shell some characters including > may need escaping. More information about this is available\n" "in the GRUB Manual in the section about the 'default' command. " msgstr "" "<菜单项> 是一个数字，或菜单项标题，或菜单项标识符。请注意，要指定子菜单或者 \"子子菜单\" 中\n" "的菜单项，您需要先指定子菜单部分，再指定菜单项本身。各个标题使用大于号 (>) 隔开，\n" "两边不能加空格。一些符号，包括 \">\" 可能需要转义，取决于您的 shell。关于这部分语法的更多信息，\n" "请阅读 GRUB 手册中介绍 \"default\" 命令的章节。" #: util/grub-reboot.in:62 msgid "NOTE: In cases where GRUB cannot write to the environment block, such as when it is stored on an MDRAID or LVM device, the chosen boot menu entry will remain the default even after reboot. " msgstr "注意，如果 GRUB 无法写入环境块，例如当环境块位于 MDRAID 或 LVM 设备上时，所选的引导菜单项即使在重启之后也仍然会是默认引导菜单项。" #: util/grub-reboot.in:110 util/grub-set-default.in:104 msgid "More than one menu entry?" msgstr "多于一个菜单项？" #: util/grub-reboot.in:120 util/grub-set-default.in:114 msgid "Menu entry not specified." msgstr "未指定菜单项。" #: util/grub-reboot.in:143 msgid "%s will remain the default boot entry until manually cleared with:\\n" msgstr "%s 将一直是默认启动项，直到使用以下命令清除：\\n" #: util/grub-set-default.in:48 msgid "Set the default boot menu entry for GRUB." msgstr "设置 GRUB 默认引导菜单项。" #: util/grub-set-default.in:49 msgid "This requires setting GRUB_DEFAULT=saved in %s/default/grub.\\n" msgstr "这需要在 %s/default/grub 中设置 GRUB_DEFAULT=saved 才能实现。\\n" #: util/grub-set-default.in:56 msgid "MENU_ENTRY is a number, a menu item title or a menu item identifier." msgstr "<菜单项> 是一个数字，或菜单项标题，或菜单项标识符。" #: util/grub.d/00_header.in:141 #, c-format msgid "Requested serial terminal but GRUB_SERIAL_COMMAND is unspecified. Default parameters will be used." msgstr "请求使用串行终端，但未指定 GRUB_SERIAL_COMMAND。将使用默认参数。" #: util/grub.d/00_header.in:232 #, c-format msgid "Found theme: %s\\n" msgstr "找到主题：%s\\n" #: util/grub.d/00_header.in:268 #, c-format msgid "Found background: %s\\n" msgstr "找到背景：%s\\n" #: util/grub.d/00_header.in:273 #, c-format msgid "Unsupported image format" msgstr "不支持的图像格式" #: util/grub.d/00_header.in:292 #, c-format msgid "Setting GRUB_TIMEOUT to a non-zero value when GRUB_HIDDEN_TIMEOUT is set is no longer supported." msgstr "在已设置 GRUB_HIDDEN_TIMEOUT 的情况下将 GRUB_TIMEOUT 设为非零值已不再受支持。" #: util/grub.d/10_hurd.in:48 #, c-format msgid "Found GNU Mach: %s" msgstr "找到 GNU Mach：%s" #: util/grub.d/10_hurd.in:63 #, c-format msgid "Found Hurd module: %s" msgstr "找到 Hurd 模块：%s" #: util/grub.d/10_hurd.in:95 #, c-format msgid "Some Hurd stuff found, but not enough to boot." msgstr "找到某些 Hurd 内容，但不足以进行引导。" #: util/grub.d/10_hurd.in:109 #, c-format msgid "%s, with Hurd %s (recovery mode)" msgstr "%s，使用 Hurd %s（恢复模式）" #: util/grub.d/10_hurd.in:112 #, c-format msgid "%s, with Hurd %s" msgstr "%s，使用 Hurd %s" #: util/grub.d/10_hurd.in:118 util/grub.d/10_kfreebsd.in:87 #: util/grub.d/10_linux.in:105 util/grub.d/10_netbsd.in:113 #: util/grub.d/20_linux_xen.in:131 util/grub.d/30_os-prober.in:293 #, c-format msgid "Please don't use old title `%s' for GRUB_DEFAULT, use `%s' (for versions before 2.00) or `%s' (for 2.00 or later)" msgstr "请不要在 GRUB_DEFAULT 中使用旧标题 \"%s\"，请使用 \"%s\"（2.00 以前的版本）或 \"%s\"（2.00 及以后的版本）" #: util/grub.d/10_hurd.in:130 #, c-format msgid "Loading GNU Mach ..." msgstr "加载 GNU Mach ..." #: util/grub.d/10_hurd.in:148 #, c-format msgid "Loading the Hurd ..." msgstr "加载 Hurd ..." #. TRANSLATORS: %s is replaced with an OS name #: util/grub.d/10_hurd.in:252 util/grub.d/10_kfreebsd.in:243 #: util/grub.d/10_linux.in:296 util/grub.d/10_netbsd.in:182 #: util/grub.d/30_os-prober.in:269 #, c-format msgid "Advanced options for %s" msgstr "%s 的高级选项" #: util/grub.d/10_illumos.in:40 #, c-format msgid "Loading kernel of Illumos ..." msgstr "加载 Illumos 内核 ..." #: util/grub.d/10_kfreebsd.in:79 #, c-format msgid "%s, with kFreeBSD %s (recovery mode)" msgstr "%s，使用 kFreeBSd %s（恢复模式）" #: util/grub.d/10_kfreebsd.in:81 #, c-format msgid "%s, with kFreeBSD %s" msgstr "%s，使用 kFreeBSD %s" #: util/grub.d/10_kfreebsd.in:101 #, c-format msgid "Loading kernel of FreeBSD %s ..." msgstr "加载 FreeBSD %s 内核 ..." #: util/grub.d/10_kfreebsd.in:174 #, c-format msgid "Found kernel of FreeBSD: %s\\n" msgstr "找到 FreeBSD 内核：%s\\n" #: util/grub.d/10_kfreebsd.in:223 #, c-format msgid "Found kernel module directory: %s\\n" msgstr "找到内核模块目录：%s\\n" #: util/grub.d/10_linux.in:97 #, c-format msgid "%s, with Linux %s (recovery mode)" msgstr "%s，使用 Linux %s（恢复模式）" #: util/grub.d/10_linux.in:99 #, c-format msgid "%s, with Linux %s" msgstr "%s，使用 Linux %s" #: util/grub.d/10_linux.in:143 util/grub.d/20_linux_xen.in:147 #, c-format msgid "Loading Linux %s ..." msgstr "加载 Linux %s ..." #. TRANSLATORS: ramdisk isn't identifier. Should be translated. #: util/grub.d/10_linux.in:150 util/grub.d/20_linux_xen.in:161 #, c-format msgid "Loading initial ramdisk ..." msgstr "加载初始化内存盘..." #: util/grub.d/10_linux.in:209 util/grub.d/20_linux_xen.in:289 #, c-format msgid "Found linux image: %s\\n" msgstr "找到 Linux 镜像：%s\\n" #: util/grub.d/10_linux.in:250 util/grub.d/20_linux_xen.in:325 #, c-format msgid "Found initrd image: %s\\n" msgstr "找到 initrd 镜像：%s\\n" #: util/grub.d/10_netbsd.in:105 #, c-format msgid "%s, with kernel %s (via %s, recovery mode)" msgstr "%s，使用 %s 内核（通过 %s，恢复模式）" #: util/grub.d/10_netbsd.in:107 #, c-format msgid "%s, with kernel %s (via %s)" msgstr "%s，使用 %s 内核（通过 %s）" #: util/grub.d/10_netbsd.in:164 #, c-format msgid "Found NetBSD kernel: %s\\n" msgstr "找到 NetBSD 内核：%s\\n" #: util/grub.d/10_windows.in:70 #, c-format msgid "Windows Vista/7 (loader)" msgstr "Windows Vista/7（加载器）" #: util/grub.d/10_windows.in:74 #, c-format msgid "Windows NT/2000/XP (loader)" msgstr "Windows NT/2000/XP（加载器）" # bash printf 不支持更改参数顺序。 #: util/grub.d/10_windows.in:85 #, c-format msgid "Found %s on %s (%s)\\n" msgstr "发现了 %s，位于 %s (%s)\\n" #. TRANSLATORS: it refers to kernel architecture (32-bit) #: util/grub.d/10_xnu.in:32 util/grub.d/30_os-prober.in:50 #, c-format msgid "(32-bit)" msgstr "（32 位）" #. TRANSLATORS: it refers to kernel architecture (64-bit) #: util/grub.d/10_xnu.in:35 util/grub.d/30_os-prober.in:53 #, c-format msgid "(64-bit)" msgstr "（64 位）" #. TRANSLATORS: it refers on the OS residing on device %s #: util/grub.d/10_xnu.in:38 util/grub.d/30_os-prober.in:56 #: util/grub.d/30_os-prober.in:156 util/grub.d/30_os-prober.in:188 #: util/grub.d/30_os-prober.in:229 util/grub.d/30_os-prober.in:309 #, c-format msgid "(on %s)" msgstr "（位于 %s）" #: util/grub.d/20_linux_xen.in:115 #, c-format msgid "%s (XSM enabled)" msgstr "%s（XSM 已启用）" #: util/grub.d/20_linux_xen.in:123 #, c-format msgid "%s, with Xen %s and Linux %s (recovery mode)" msgstr "%s，使用 Xen %s 和 Linux %s（恢复模式）" #: util/grub.d/20_linux_xen.in:125 #, c-format msgid "%s, with Xen %s and Linux %s" msgstr "%s，使用 Xen %s 和 Linux %s" #: util/grub.d/20_linux_xen.in:135 #, c-format msgid "%s, with Xen hypervisor" msgstr "%s，使用 Xen hypervisor" #: util/grub.d/20_linux_xen.in:146 #, c-format msgid "Loading Xen %s ..." msgstr "加载 Xen %s ..." #: util/grub.d/20_linux_xen.in:172 #, c-format msgid "Loading XSM policy ..." msgstr "加载 XSM 策略 ..." #: util/grub.d/20_linux_xen.in:265 util/grub.d/20_linux_xen.in:358 #, c-format msgid "Xen hypervisor, version %s" msgstr "Xen hypervisor，%s 版本" #. TRANSLATORS: %s is replaced with an OS name #: util/grub.d/20_linux_xen.in:357 #, c-format msgid "Advanced options for %s (with Xen hypervisor)" msgstr "%s 的高级选项（使用 Xen hypervisor）" #: util/grub.d/30_os-prober.in:30 #, c-format msgid "os-prober will not be executed to detect other bootable partitions.\\nSystems on them will not be added to the GRUB boot configuration.\\nCheck GRUB_DISABLE_OS_PROBER documentation entry." msgstr "os-prober 将不会运行并检测其它可引导分区。\\n这些分区上的系统将不会被添加至 GRUB 引导配置中。\\n请检查 GRUB_DISABLE_OS_PROBER 文档条目以了解详情。" #: util/grub.d/30_os-prober.in:39 #, c-format msgid "os-prober will be executed to detect other bootable partitions.\\nIts output will be used to detect bootable binaries on them and create new boot entries." msgstr "os-prober 将运行以检测其它可引导分区。\\n将使用 os-prober 的输出，以检测分区中可引导的二进制文件，并为其创建新的启动项。" # bash printf 不支持更改参数顺序。 #: util/grub.d/30_os-prober.in:151 #, c-format msgid "Found %s on %s\\n" msgstr "发现了 %s，位于 %s\\n" #. TRANSLATORS: %s is replaced by OS name. #: util/grub.d/30_os-prober.in:347 #, c-format msgid "%s is not yet supported by grub-mkconfig.\\n" msgstr "grub-mkconfig 尚未支持 %s。\\n" #: util/grub.d/30_uefi-firmware.in:31 #, c-format msgid "Adding boot menu entry for UEFI Firmware Settings ...\\n" msgstr "正在添加 UEFI 固件设置的引导菜单项……\\n" #~ msgid "SOURCE|-u UUID|-a|-b" #~ msgstr "源|-u UUID|-a|-b" #~ msgid "Linux not supported yet" #~ msgstr "尚未支持 Linux" #~ msgid "interpret is not supported" #~ msgstr "不支持 interpret" #~ msgid "overflow is detected." #~ msgstr "探测到溢出。" #~ msgid "module cannot be loaded in UEFI secure boot mode: %s" #~ msgstr "模块在 UEFI 安全启动模式下无法加载：%s" #~ msgid "cannot boot due to dangerous module in memory: %s" #~ msgstr "因内存中有危险模块而无法引导启动：%s" #~ msgid "ARGP_HELP_FMT: %s value is less than or equal to %s" #~ msgstr "ARGP_HELP_FMT：%s 值比 %s 更小或与其相等" #~ msgid "Mandatory or optional arguments to long options are also mandatory or optional for any corresponding short options." #~ msgstr "对长选项的必需或可选参数对于任何对应的短选项也是相应必需或可选的。" #~ msgid " or: " #~ msgstr " 或：" #~ msgid " [OPTION...]" #~ msgstr " [选项...]" #~ msgid "Try '%s --help' or '%s --usage' for more information.\n" #~ msgstr "请尝试运行“%s --help”或“%s --usage”以获得更多信息。\n" #~ msgid "Report bugs to %s.\n" #~ msgstr "请将缺陷与错误报告至 %s。\n" #~ msgid "Unknown system error" #~ msgstr "未知的系统错误" #~ msgid "give this help list" #~ msgstr "给出本帮助列表" #~ msgid "give a short usage message" #~ msgstr "给出简短的用法信息" #~ msgid "set the program name" #~ msgstr "设置程序名称" #~ msgid "hang for SECS seconds (default 3600)" #~ msgstr "挂起指定 SECS 秒所给定的时间（默认为 3600）" #~ msgid "print program version" #~ msgstr "输出程序版本" #~ msgid "(PROGRAM ERROR) No version known!?" #~ msgstr "（程序错误）没有已知版本！？" #~ msgid "%s: Too many arguments\n" #~ msgstr "%s：太多参数\n" #~ msgid "(PROGRAM ERROR) Option should have been recognized!?" #~ msgstr "（程序错误）选项应当已被识别！？" #, fuzzy #~| msgid "%s: option '-W %s' is ambiguous\n" #~ msgid "%s: option '%s%s' is ambiguous\n" #~ msgstr "%s：选项“-W %s”有歧义\n" #, fuzzy #~| msgid "%s: option '%s' is ambiguous; possibilities:" #~ msgid "%s: option '%s%s' is ambiguous; possibilities:" #~ msgstr "%s：选项“%s”有歧义；可能是:" #, fuzzy #~| msgid "%s: unrecognized option '%c%s'\n" #~ msgid "%s: unrecognized option '%s%s'\n" #~ msgstr "%s：无法识别的选项“%c%s”\n" #, fuzzy #~| msgid "%s: option '%c%s' doesn't allow an argument\n" #~ msgid "%s: option '%s%s' doesn't allow an argument\n" #~ msgstr "%s：选项“%c%s”不允许有参数\n" #, fuzzy #~| msgid "%s: option '--%s' requires an argument\n" #~ msgid "%s: option '%s%s' requires an argument\n" #~ msgstr "%s：选项“--%s”需要一个参数\n" #~ msgid "%s: invalid option -- '%c'\n" #~ msgstr "%s：无效的选项 --“%c”\n" #~ msgid "%s: option requires an argument -- '%c'\n" #~ msgstr "%s：选项需要一个参数 -- “%c”\n" #, fuzzy #~| msgid "Unable to delete non-empty directory\n" #~ msgid "unable to record current working directory" #~ msgstr "无法删除非空目录\n" #~ msgid "failed to return to initial working directory" #~ msgstr "返回初始工作目录失败" #~ msgid "Invalid regular expression" #~ msgstr "无效的正则表达式" #~ msgid "Trailing backslash" #~ msgstr "末尾的反斜杠" #~ msgid "Invalid back reference" #~ msgstr "无效的后向引用" #~ msgid "Unmatched [, [^, [:, [., or [=" #~ msgstr "未匹配的 [、[^、[:、[. 或 [=" #~ msgid "Unmatched ( or \\(" #~ msgstr "未匹配的 ( 或 \\(" #~ msgid "Unmatched \\{" #~ msgstr "未匹配的 \\{" #~ msgid "Invalid content of \\{\\}" #~ msgstr "\\{\\} 的无效内容" #~ msgid "Invalid range end" #~ msgstr "无效的范围结束" #~ msgid "Memory exhausted" #~ msgstr "内存耗尽" #~ msgid "Premature end of regular expression" #~ msgstr "正则表达式过早结束" #~ msgid "Regular expression too big" #~ msgstr "正则表达式过长" #~ msgid "Unmatched ) or \\)" #~ msgstr "未匹配的 ) 或 \\)" #~ msgid "unknown regexp error" #~ msgstr "未知正则表达式错误" #~ msgid "No previous regular expression" #~ msgstr "缺少之前的正则表达式" #~ msgid "%s: option '--%s' doesn't allow an argument\n" #~ msgstr "%s：选项“--%s”不允许有参数\n" #~ msgid "%s: unrecognized option '--%s'\n" #~ msgstr "%s：无法识别的选项“--%s”\n" #~ msgid "%s: option '-W %s' doesn't allow an argument\n" #~ msgstr "%s：选项“-W %s”不允许有参数\n" #~ msgid "%s: option '-W %s' requires an argument\n" #~ msgstr "%s：选项“-W %s”需要一个参数\n" #~ msgid "Expose v1 tables." #~ msgstr "显示 v1 表。" #~ msgid "Fake BIOS." #~ msgstr "BIOS 伪装。" #~ msgid "Check hash list file." #~ msgstr "检查哈希列表文件。" #~ msgid "DIRECTORY" #~ msgstr "目录" #~ msgid "Unload PXE environment." #~ msgstr "卸载 PXE 环境。" #~ msgid "Read word from PORT." #~ msgstr "从指定端口读取字。" #~ msgid "Write word VALUE to PORT." #~ msgstr "向指定端口写入字类型值。" #~ msgid "Write dword VALUE to PORT." #~ msgstr "向指定端口写入 dword 类型值。" #~ msgid "[--shift] [--ctrl] [--alt]" #~ msgstr "[--shift] [--ctrl] [--alt]" #~ msgid "[-1|-2]" #~ msgstr "[-1|-2]" #~ msgid "Read word from ADDR." #~ msgstr "从指定地址读取字。" #~ msgid "Read dword from ADDR." #~ msgstr "从指定地址读取双字。" #~ msgid "Write word VALUE to ADDR." #~ msgstr "向指定地址写入 word 类型值。" #~ msgid "Write dword VALUE to ADDR." #~ msgstr "向指定地址写入 dword 类型值。" #~ msgid "Menu entry definition as a string." #~ msgstr "以字符串定义的菜单项。" #~ msgid "[DEVICE]" #~ msgstr "[设备]" #~ msgid "Load XNU hibernate image." #~ msgstr "载入休眠镜像。" #~ msgid "Authenticate users" #~ msgstr "认证用户" #~ msgid "[n]" #~ msgstr "[n]" #~ msgid "UTF-8 visual" #~ msgstr "UTF-8 可视" #~ msgid "If FILENAME is '-', the default value %s is used." #~ msgstr "如果文件名是 -，则使用默认值 %s。" #~ msgid "write error" #~ msgstr "写入出错" #~ msgid "open error" #~ msgstr "打开出错" #~ msgid "seek error" #~ msgstr "寻道错误" #~ msgid "Hex dump FILE." #~ msgstr "使用 16 进制转储指定的文件。" #~ msgid "Must use absolute path.\n" #~ msgstr "必须使用绝对路径。\n" #~ msgid "prefix is too long" #~ msgstr "前缀太长" #~ msgid "" #~ "Usage: %s [OPTION]... [MODULES]\n" #~ "\n" #~ "Make a bootable image of GRUB.\n" #~ "\n" #~ " -d, --directory=DIR use images and modules under DIR [default=%s/@platform@]\n" #~ " -p, --prefix=DIR set grub_prefix directory [default=%s]\n" #~ " -m, --memdisk=FILE embed FILE as a memdisk image\n" #~ " -c, --config=FILE embed FILE as boot config\n" #~ " -n, --note add NOTE segment for CHRP Open Firmware\n" #~ " -o, --output=FILE output a generated image to FILE [default=stdout]\n" #~ " -O, --format=FORMAT generate an image in format\n" #~ " available formats: %s\n" #~ " -C, --compression=(xz|none|auto) choose the compression to use\n" #~ " -h, --help display this message and exit\n" #~ " -V, --version print version information and exit\n" #~ " -v, --verbose print verbose messages\n" #~ "\n" #~ "Report bugs to <%s>.\n" #~ msgstr "" #~ "用法：%s [选项]... [模块]\n" #~ "\n" #~ "制作一个可引导的 GRUB 镜像。\n" #~ " -d, --directory=DIR 使用 DIR 目录下的镜像和模块 [默认=%s/@platform@]\n" #~ " -p, --prefix=DIR 设定 grub_prefix 路径 [默认=%s]\n" #~ " -m, --memdisk=FILE 嵌入 FILE 文件作为内存盘镜像\n" #~ " -c, --config=FILE 嵌入 FILE 文件作为引导配置\n" #~ " -n, --note 为 CHRP 开放固件添加 NOTE 段\n" #~ " -o, --output=FILE 将生成的镜像写入 FILE 文件 [默认=标准输出]\n" #~ " -O, --format=FORMAT 按照指定格式生成镜像\n" #~ " 可用的格式有：%s\n" #~ " -C, --compression=(xz|none|auto) 选择要使用的压缩方式\n" #~ " -h, --help 显示此信息并退出\n" #~ " -V, --version 显示版本信息并退出\n" #~ " -v, --verbose 显示详细信息\n" #~ "\n" #~ "软件错误请报告给 %s\n" #~ msgid "embedding is not possible, but this is required when the root device is on a RAID array or LVM volume" #~ msgstr "无法嵌入，但在根设备位于 RAID 阵列或 LVM 卷上时必须使用嵌入。" #~ msgid "failed to read the first sector of the core image" #~ msgstr "读取核心镜像的第一扇区失败" #~ msgid "DEV" #~ msgstr "设备" #~ msgid "Use DEV as the root device [default=guessed]" #~ msgstr "使用指定设备作为根设备 [默认=guessed]" #~ msgid "cannot guess the root device. Specify the option `--root-device'" #~ msgstr "无法猜测根设备。请使用“--root-device”参数指定。" #~ msgid "[class [handler]]" #~ msgstr "[类 [处理程序]]" #~ msgid "List compatible VESA BIOS extension video modes." #~ msgstr "列出兼容的 VESA BIOS 扩展视频模式" #~ msgid "Test VESA BIOS Extension 2.0+ support." #~ msgstr "测试 VESA BIOS 扩展 2.0+ 支持。" #~ msgid "Set the root device." #~ msgstr "设置根设备。" #~ msgid "Simulate a hard drive with partitions." #~ msgstr "模拟一个带分区的硬盘。" #~ msgid "Attempting to install GRUB to a partition instead of the MBR. This is a BAD idea." #~ msgstr "正在试图将 GRUB 安装至一个分区而非 MBR。这是一个坏主意。" #~ msgid "No DOS-style partitions found" #~ msgstr "未找到 DOS 类型分区" #~ msgid "if you really want blocklists, use --force" #~ msgstr "如果确实要使用块列表，请使用 --force 选项" #~ msgid "" #~ "Usage: %s [OPTION]... DEVICE\n" #~ "\n" #~ "Set up images to boot from DEVICE.\n" #~ "DEVICE must be a GRUB device (e.g. `(hd0,1)').\n" #~ "\n" #~ " -b, --boot-image=FILE use FILE as the boot image [default=%s]\n" #~ " -c, --core-image=FILE use FILE as the core image [default=%s]\n" #~ " -d, --directory=DIR use GRUB files in the directory DIR [default=%s]\n" #~ " -m, --device-map=FILE use FILE as the device map [default=%s]\n" #~ " -r, --root-device=DEV use DEV as the root device [default=guessed]\n" #~ " -f, --force install even if problems are detected\n" #~ " -s, --skip-fs-probe do not probe for filesystems in DEVICE\n" #~ " -h, --help display this message and exit\n" #~ " -V, --version print version information and exit\n" #~ " -v, --verbose print verbose messages\n" #~ "\n" #~ "Report bugs to <%s>.\n" #~ msgstr "" #~ "用法：%s [选项]...[设备]\n" #~ "\n" #~ "设置从指定设备引导的镜像。\n" #~ "指定的设备必须是 GRUB 设备格式(例如“(hd0,1)”)。\n" #~ "\n" #~ " -b, --boot-image=文件 使用指定文件作为引导镜像 [默认为 %s]\n" #~ " -c, --core-image=文件 使用指定文件作为核心镜像 [默认为 %s]\n" #~ " -d, --directory=目录 使用指定目录中的 GRUB 文件 [默认为 %s]\n" #~ " -m, --device-map=文件 使用指定文件作为设备映射 [默认为 %s]\n" #~ " -r, --root-device=设备 使用指定设备作为根设备 [默认为 guessed]\n" #~ " -f, --force 检测到问题的情况下仍强制安装\n" #~ " -s, --skip-fs-probe 不在设备中探测文件系统\n" #~ " -h, --help 显示此信息并且退出\n" #~ " -V, --version 显示版本信息并且退出\n" #~ " -v, --verbose 显示详细信息\n" #~ "\n" #~ "软件错误请报告给 %s\n" #~ msgid "A boot catalog exists and appears corrupted.\n" #~ msgstr "引导目录存在且似乎已损坏。\n" #~ msgid "Please check the following file: %s.\n" #~ msgstr "请检查以下文件：%s。\n" #~ msgid "This file must be removed before a bootable CD can be done.\n" #~ msgstr "必须在可引导 CD 完成之前删除此文件。\n" #~ msgid "Error creating boot catalog (%s)" #~ msgstr "创建引导目录时出错(%s)" #~ msgid "Error writing to boot catalog (%s)" #~ msgstr "写入引导目录时出错(%s)" #~ msgid "Boot catalog cannot be found!\n" #~ msgstr "无法找到引导目录！\n" #~ msgid "Boot image cannot be found!\n" #~ msgstr "无法找到引导镜像！\n" #~ msgid "" #~ "\n" #~ "Size of boot image is %d sectors" #~ msgstr "" #~ "\n" #~ "引导镜像的大小为 %d 个扇区" #~ msgid "No emulation\n" #~ msgstr "无模拟\n" #~ msgid "Emulating a 1.44 meg floppy\n" #~ msgstr "模拟 1.44MB 软盘\n" #~ msgid "Emulating a 2.88 meg floppy\n" #~ msgstr "模拟 2.88MB 软盘\n" #~ msgid "Emulating a 1.2 meg floppy\n" #~ msgstr "模拟 1.2MB 软盘\n" #~ msgid "" #~ "\n" #~ "Error - boot image is not the an allowable size.\n" #~ msgstr "" #~ "\n" #~ "错误 - 引导镜像大小不被允许。\n" #~ msgid "Error opening boot catalog for update" #~ msgstr "无法打开引导目录进行更新" #~ msgid "Error writing to boot catalog" #~ msgstr "写入到引导目录时出错" #~ msgid "Error opening boot image file '%s' for update" #~ msgstr "无法打开引导镜像文件“%s”进行更新" #~ msgid "Odd alignment at non-end-of-file in boot image '%s'" #~ msgstr "引导镜像“%s”在非文件结束位置上存在错误的对齐。" #~ msgid "Boot image file '%s' changed unexpectedly" #~ msgstr "引导镜像文件“%s”意外改变" #~ msgid "Error writing to boot image (%s)" #~ msgstr "写入到引导镜像出错(%s)" #~ msgid "Unable to generate sane path tables - too many directories (%d)\n" #~ msgstr "无法生成合理的路径表 - 目录过多(%d)\n" #~ msgid "Entry %d not in path tables\n" #~ msgstr "条目 %d 不在路径表中\n" #~ msgid "Fatal goof - directory has amnesia\n" #~ msgstr "致命错误 - 目录失忆\n" #~ msgid "Joliet path table lengths do not match %d %d\n" #~ msgstr "Joliet 路径表长度不匹配 %d %d\n" #~ msgid "Unable to locate relocated directory\n" #~ msgstr "无法找到重定位的目录\n" #~ msgid "Fatal goof - unable to find directory location\n" #~ msgstr "致命错误 - 无法找到目录位置\n" #~ msgid "Unexpected joliet directory length %d %d %s\n" #~ msgstr "未预料的 Joliet 目录长度 %d %d %s\n" #~ msgid "Process all files (don't skip backup files)" #~ msgstr "处理全部文件(包括备份文件)" #~ msgid "Set Application ID" #~ msgstr "设置应用 ID" #~ msgid "Set Bibliographic filename" #~ msgstr "设置参考信息文件名" #~ msgid "Set Copyright filename" #~ msgstr "设置版权文件名" #~ msgid "Set embedded boot image name" #~ msgstr "设置嵌入式启动镜像名称" #~ msgid "Patch a protective DOS-style label in the image" #~ msgstr "在镜像中补充保护性的 DOS 类型标签" #~ msgid "Set El Torito boot image name" #~ msgstr "设置 El Torito 引导镜像名称" #~ msgid "Set El Torito boot catalog name" #~ msgstr "设置 El Torito 引导目录名称" #~ msgid "Patch Boot Info Table in El Torito boot image" #~ msgstr "在 El Torito 引导镜像中补充引导信息表" #~ msgid "Dummy option for backward compatibility" #~ msgstr "为与过去兼容设计的过渡选项" #~ msgid "Enable floppy drive emulation for El Torito" #~ msgstr "为 El Torito 启用软驱模拟" #~ msgid "Magic parameters from cdrecord" #~ msgstr "cdrecord 使用的 magic 参数" #~ msgid "Omit trailing periods from filenames" #~ msgstr "忽略文件名尾部的句号" #~ msgid "Disable deep directory relocation" #~ msgstr "禁用深度目录重定位" #~ msgid "Follow symbolic links" #~ msgstr "跟随符号链接" #~ msgid "Print option help" #~ msgstr "输出选项帮助信息" #~ msgid "GLOBFILE" #~ msgstr "GLOBFILE" #~ msgid "Hide ISO9660/RR file" #~ msgstr "隐藏 ISO9660/RR 文件" #~ msgid "Hide Joliet file" #~ msgstr "隐藏 Joliet 文件" #~ msgid "ADD_FILES" #~ msgstr "ADD_FILES" #~ msgid "No longer supported" #~ msgstr "不再支持" #~ msgid "Generate Joliet directory information" #~ msgstr "生成 Joliet 目录信息" #~ msgid "Allow full 32 character filenames for iso9660 names" #~ msgstr "允许 ISO9660 文件名完整包含 32 个字符" #~ msgid "Allow iso9660 filenames to start with '.'" #~ msgstr "允许 ISO9660 文件名以“.”开头" #~ msgid "LOG_FILE" #~ msgstr "LOG_FILE" #~ msgid "Re-direct messages to LOG_FILE" #~ msgstr "重定向所有信息到 LOG_FILE" #~ msgid "Exclude file name" #~ msgstr "排除文件名" #~ msgid "Set path to previous session to merge" #~ msgstr "设置上一会话的路径以便合并" #~ msgid "Omit version number from iso9660 filename" #~ msgstr "从 ISO9660 文件名中忽略版本号" #~ msgid "Inhibit splitting symlink components" #~ msgstr "禁止分割符号链接组件" #~ msgid "Inhibit splitting symlink fields" #~ msgstr "禁止分割符号链接域" #~ msgid "PREP" #~ msgstr "PREP" #~ msgid "Set Volume preparer" #~ msgstr "设置卷编制者" #~ msgid "Print estimated filesystem size and exit" #~ msgstr "输出文件系统估计尺寸并退出" #~ msgid "Set Volume publisher" #~ msgstr "设置卷发行者" #~ msgid "Run quietly" #~ msgstr "静默执行" #~ msgid "Generate rationalized Rock Ridge directory information" #~ msgstr "生成合理化的 Rock Ridge 目录信息" #~ msgid "Generate Rock Ridge directory information" #~ msgstr "生成 Rock Ridge 目录信息" #~ msgid "Split output into files of approx. 1GB size" #~ msgstr "将输出分割为 1GB 大小的文件" #~ msgid "Set System ID" #~ msgstr "设置系统 ID" #~ msgid "Generate translation tables for systems that don't understand long filenames" #~ msgstr "为无法识别长文件名的系统生成翻译表" #~ msgid "Verbose" #~ msgstr "详细" #~ msgid "Set Volume ID" #~ msgstr "设置卷 ID" #~ msgid "Set Volume set ID" #~ msgstr "设置卷集合 ID" #~ msgid "Set Volume set sequence number" #~ msgstr "设置卷集合序列号" #~ msgid "Override creation date" #~ msgstr "覆盖创建日期" #~ msgid "Override expiration date" #~ msgstr "覆盖过期日期" #~ msgid "Override effective date" #~ msgstr "覆盖有效日期" #~ msgid "Using \"%s\"\n" #~ msgstr "使用“%s”\n" #~ msgid "%s:%d: equals sign required\n" #~ msgstr "%s:%d：需要等号\n" #~ msgid "%s:%d: field name \"%s\" unknown\n" #~ msgstr "%s:%d：域名“%s”未知\n" #~ msgid "Usage: %s [options] file...\n" #~ msgstr "用法：%s [选项] 文件...\n" #~ msgid "Required boot image pathname missing" #~ msgstr "缺少必须的引导镜像路径名" #~ msgid "Required boot catalog pathname missing\n" #~ msgstr "缺少必须的引导目录路径名\n" #~ msgid "Ignoring -no-emul-boot (no-emulation is the default behaviour)\n" #~ msgstr "忽略 -no-emul-boot 选项(no-emulation是默认行为)\n" #~ msgid "Abstract filename string too long\n" #~ msgstr "摘要文件名太长\n" #~ msgid "Application-id string too long\n" #~ msgstr "应用程序编号串太长\n" #~ msgid "Bibliographic filename string too long\n" #~ msgstr "参考信息文件名太长\n" #~ msgid "Copyright filename string too long\n" #~ msgstr "版权文件名太长\n" #~ msgid "Publisher string too long\n" #~ msgstr "发行者描述信息太长\n" #~ msgid "System ID string too long\n" #~ msgstr "系统 ID 字符串太长\n" #~ msgid "Volume ID string too long\n" #~ msgstr "卷 ID 字符串太长\n" #~ msgid "Volume set ID string too long\n" #~ msgstr "卷集合 ID 太长\n" #~ msgid "Volume set sequence number too big\n" #~ msgstr "卷集合序列号太大\n" #~ msgid "date string must be 16 characters.\n" #~ msgstr "日期字符串长度必须为 16 个字符。\n" #~ msgid "Warning: setrlimit" #~ msgstr "警告：setrlimit" #~ msgid "Multisession usage bug: Must specify -C if -M is used.\n" #~ msgstr "多会话使用错误: 若使用 -M 选项则必须指定 -C 选项。\n" #~ msgid "Warning: -C specified without -M: old session data will not be merged.\n" #~ msgstr "警告：在未使用 -M 的情况下使用了 -C 选项：原有会话数据将不被合并。\n" #~ msgid "re-directing all messages to %s\n" #~ msgstr "重定向所有信息到 %s\n" #~ msgid "Unable to open previous session image %s\n" #~ msgstr "无法打开上一会话使用的镜像 %s\n" #~ msgid "Joliet tree sort failed.\n" #~ msgstr "Joliet 树排序失败。\n" #~ msgid "Unable to open /dev/null\n" #~ msgstr "无法打开 /dev/null\n" #~ msgid "Unable to open disc image file\n" #~ msgstr "无法打开磁盘镜像文件\n" #~ msgid "Max brk space used %x\n" #~ msgstr "已使用的最大中断空间 %x\n" #~ msgid "%llu extents written (%llu MiB)\n" #~ msgstr "%llu 已经写入扩展块(%llu MiB)\n" #~ msgid "Seek error on old image\n" #~ msgstr "在旧镜像上发生搜寻错误\n" #~ msgid "**Bad RR version attribute" #~ msgstr "**错误的 Rock Ridge 版本属性" #~ msgid "Warning: Neither Rock Ridge (-R) nor TRANS.TBL (-T) name translations were found on previous session. ISO (8.3) file names have been used instead.\n" #~ msgstr "警告：未在前一会话中发现 Rock Ridge (-R) 或 TRANS.TBL (-T) 名称翻译，使用 ISO (8.3) 文件名代替。\n" # need to check source code. # Is %s referring to the "old image" or the error msg? #~ msgid "Read error on old image %s\n" #~ msgstr "在旧镜像 %s 上发生读错误\n" #~ msgid "Special parameters for cdwrite not specified with -C\n" #~ msgstr "cdwrite 的特殊参数没有通过 -C 指定\n" #~ msgid "Malformed cdwrite parameters\n" #~ msgstr "cdwrite 参数格式错误\n" #~ msgid "symbolic link ``%s'' to long for one SL System Use Field, splitting" #~ msgstr "符号链接“%s”对于单个 SL 系统使用域太长，进行分割" #~ msgid "Unable to insert transparent compressed file - name conflict\n" #~ msgstr "无法插入透明压缩文件 - 文件名冲突\n" #~ msgid "Extension record too long\n" #~ msgstr "扩展记录太长\n" #~ msgid "Fatal goof\n" #~ msgstr "致命错误\n" #~ msgid "Unable to generate unique name for file %s\n" #~ msgstr "无法为文件 %s 生成唯一的名字\n" #~ msgid "Fatal error - RR overflow for file %s\n" #~ msgstr "致命错误 - 文件 %s 发生 Rock Ridge 溢出\n" #~ msgid "Translation table size mismatch %d %d\n" #~ msgstr "翻译表大小不匹配 %d %d\n" #~ msgid "Unable to locate directory parent\n" #~ msgstr "无法定位上级目录\n" #~ msgid "Scanning %s\n" #~ msgstr "正在扫描 %s\n" #~ msgid "Ignoring file %s\n" #~ msgstr "忽略文件 %s\n" #~ msgid "Overflow of stat buffer\n" #~ msgstr "状态缓冲区溢出\n" #~ msgid "Excluded by match: %s\n" #~ msgstr "匹配排除条件：%s\n" #~ msgid "Excluded: %s\n" #~ msgstr "已排除：%s\n" #~ msgid "Non-existant or inaccessible: %s\n" #~ msgstr "不存在或不可访问：%s\n" #~ msgid "Unable to stat file %s - ignoring and continuing.\n" #~ msgstr "无法获得文件 %s 的状态 - 忽略并继续。\n" #~ msgid "Symlink %s ignored - continuing.\n" #~ msgstr "忽略符号链接 %s - 继续。\n" #~ msgid "Already cached directory seen (%s)\n" #~ msgstr "发现已缓冲目录(%s)\n" #~ msgid "File %s is not readable (%s) - ignoring\n" #~ msgstr "文件 %s 无法读取(%s) - 忽略\n" #~ msgid "Directory loop - fatal goof (%s %lx %lu).\n" #~ msgstr "目录循环嵌套 - 致命错误(%s %lx %lu)。\n" #~ msgid "Unknown file type %s - ignoring and continuing.\n" #~ msgstr "未知文件类型 %s - 忽略并继续。\n" #~ msgid "Hidden from ISO9660 tree: %s\n" #~ msgstr "从 ISO9660 树隐藏：%s\n" #~ msgid "Hidden from Joliet tree: %s\n" #~ msgstr "从 Joliet 树隐藏：%s\n" #~ msgid "Directories too deep %s\n" #~ msgstr "目录层次太深 %s\n" #~ msgid "Unable to locate child directory in parent list\n" #~ msgstr "在上级目录列表中无法定位子目\n" #~ msgid "call to search_tree_file with an absolute path, stripping\n" #~ msgstr "search_tree_file 的调用使用了绝对路径，正在剥离\n" #~ msgid "initial path separator. Hope this was intended...\n" #~ msgstr "初始路径分隔符。希望这是预期的结果...\n" #~ msgid "Cannot open '%s'" #~ msgstr "无法打开“%s”" #~ msgid "cannot fwrite %llu*%llu\n" #~ msgstr "无法 fwrite %llu*%llu\n" #~ msgid "cannot open %s\n" #~ msgstr "无法打开 %s\n" #~ msgid "%6.2f%% done, estimate finish %s" #~ msgstr "已完成 %6.2f%%，估计 %s 完成" #~ msgid "Cache hit for %s%s%s\n" #~ msgstr "命中缓存：%s%s%s\n" #~ msgid "Unexpected directory length %d %d %s\n" #~ msgstr "未预料的目录长度 %d %d %s\n" #~ msgid "Continuation entry record length mismatch (%d %d).\n" #~ msgstr "延续条目记录的长度不匹配(%d %d)。\n" #~ msgid "Path table lengths do not match %d %d\n" #~ msgstr "路径表的长度不匹配 %d %d\n" #~ msgid "Total extents scheduled to be written = %llu\n" #~ msgstr "预计要写入的扩展块总数 = %llu \n" #~ msgid "Total extents actually written = %llu\n" #~ msgstr "实际写入的扩展块总数 = %llu\n" #~ msgid "Number of extents written different than what was predicted. Please fix.\n" #~ msgstr "实际写入的扩展块数量和预计不同。请修正。\n" #~ msgid "Predicted = %d, written = %llu\n" #~ msgstr "预计 = %d，已写入 = %llu\n" #~ msgid "Total rockridge attributes bytes: %d\n" #~ msgstr "Rock Ridge 属性总大小：%d\n" #~ msgid "Path table size(bytes): %d\n" #~ msgstr "路径表大小：%d 字节\n" #~ msgid "ESC to return previous menu." #~ msgstr "按 ESC 返回上一菜单。" #~ msgid "the size of memory disk is 0x%x" #~ msgstr "内存磁盘大小为 0x%x" #~ msgid "the size of config file is 0x%x" #~ msgstr "配置文件大小为 0x%x" #~ msgid "the total module size is 0x%x" #~ msgstr "模块总计大小为 0x%x" #~ msgid "the core image will be embedded at sector 0x%llx" #~ msgstr "核心镜像将被嵌入于 0x%llx 扇区" #~ msgid "error message = %s" #~ msgstr "错误信息 = %s" #~ msgid "opening the core image `%s'" #~ msgstr "正在打开核心镜像 `%s'" #~ msgid "guessing the root device failed, because of `%s'" #~ msgstr "猜测根设备失败，原因为 `%s'"