# Traditional Chinese Messages for the sed.
# Copyright (C) 2002, 05 Free Software Foundation, Inc.
# This file is distributed under the same license as the sed package.
#
# Wang Li <charles@linux.net.cn>, 2002.
# Wei-Lun Chao <bluebat@member.fsf.org>, 2005, 2013.
# pan93412 <pan93412@gmail.com>, 2019, 2020.
msgid ""
msgstr ""
"Project-Id-Version: sed 4.8.44\n"
"Report-Msgid-Bugs-To: bug-gnu-utils@gnu.org\n"
"POT-Creation-Date: 2022-10-16 22:21-0700\n"
"PO-Revision-Date: 2022-11-03 08:17+0800\n"
"Last-Translator: Yi-Jyun Pan <pan93412@gmail.com>\n"
"Language-Team: Chinese (traditional) <zh-l10n@lists.linux.org.tw>\n"
"Language: zh_TW\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=1; plural=0;\n"
"X-Bugs: Report translation errors to the Language-Team address.\n"
"X-Generator: Poedit 3.2\n"

#: lib/closeout.c:121
msgid "write error"
msgstr "寫入錯誤"

#: lib/copy-acl.c:54
#, c-format
msgid "preserving permissions for %s"
msgstr "正為 %s 保留權限"

#: lib/dfa.c:894
msgid "unbalanced ["
msgstr "不平衡的 ["

#: lib/dfa.c:1015
msgid "invalid character class"
msgstr "無效字元類別"

#: lib/dfa.c:1143
msgid "character class syntax is [[:space:]], not [:space:]"
msgstr "字元類別語法是 [[:space:]] 而非 [:space:]"

#: lib/dfa.c:1209
msgid "unfinished \\ escape"
msgstr "未完成的 \\ 跳脫字元"

#: lib/dfa.c:1319
msgid "? at start of expression"
msgstr "表示式開頭有 ?"

#: lib/dfa.c:1331
msgid "* at start of expression"
msgstr "表示式開頭有 *"

#: lib/dfa.c:1345
msgid "+ at start of expression"
msgstr "表示式開頭有 +"

#: lib/dfa.c:1400
msgid "{...} at start of expression"
msgstr "表示式開頭有 {…}"

#: lib/dfa.c:1403
msgid "invalid content of \\{\\}"
msgstr "無效的 \\{\\} 中內容"

#: lib/dfa.c:1405
msgid "regular expression too big"
msgstr "正規表示式過長"

#: lib/dfa.c:1555
msgid "stray \\ before unprintable character"
msgstr "在不可見字元前有孤立的 \\"

#: lib/dfa.c:1557
msgid "stray \\ before white space"
msgstr "在空白前有孤立的 \\"

#: lib/dfa.c:1561
#, c-format
msgid "stray \\ before %lc"
msgstr "在 %lc 前有孤立的 \\"

#: lib/dfa.c:1562
msgid "stray \\"
msgstr "有孤立的 \\"

#: lib/dfa.c:1917
msgid "unbalanced ("
msgstr "不平衡的 ("

#: lib/dfa.c:2034
msgid "no syntax specified"
msgstr "未指定語法"

#: lib/dfa.c:2045
msgid "unbalanced )"
msgstr "不平衡的 )"

#: lib/error.c:195
msgid "Unknown system error"
msgstr "未知系統錯誤"

#: lib/obstack.c:337 lib/obstack.c:339 lib/xalloc-die.c:34
msgid "memory exhausted"
msgstr "記憶體耗盡"

#. TRANSLATORS:
#. Get translations for open and closing quotation marks.
#. The message catalog should translate "`" to a left
#. quotation mark suitable for the locale, and similarly for
#. "'".  For example, a French Unicode local should translate
#. these to U+00AB (LEFT-POINTING DOUBLE ANGLE
#. QUOTATION MARK), and U+00BB (RIGHT-POINTING DOUBLE ANGLE
#. QUOTATION MARK), respectively.
#.
#. If the catalog has no translation, we will try to
#. use Unicode U+2018 (LEFT SINGLE QUOTATION MARK) and
#. Unicode U+2019 (RIGHT SINGLE QUOTATION MARK).  If the
#. current locale is not Unicode, locale_quoting_style
#. will quote 'like this', and clocale_quoting_style will
#. quote "like this".  You should always include translations
#. for "`" and "'" even if U+2018 and U+2019 are appropriate
#. for your locale.
#.
#. If you don't know what to put here, please see
#. <https://en.wikipedia.org/wiki/Quotation_marks_in_other_languages>
#. and use glyphs suitable for your language.
#: lib/quotearg.c:354
msgid "`"
msgstr "`"

#: lib/quotearg.c:355
msgid "'"
msgstr "'"

#: lib/regcomp.c:122
msgid "Success"
msgstr "成功"

#: lib/regcomp.c:125
msgid "No match"
msgstr "沒有符合者"

#: lib/regcomp.c:128
msgid "Invalid regular expression"
msgstr "不正確的正規表示式"

#: lib/regcomp.c:131
msgid "Invalid collation character"
msgstr "不正確的核對字元"

#: lib/regcomp.c:134
msgid "Invalid character class name"
msgstr "不正確的字元等級名稱"

#: lib/regcomp.c:137
msgid "Trailing backslash"
msgstr "末端有倒斜線"

#: lib/regcomp.c:140
msgid "Invalid back reference"
msgstr "不正確的返回參考"

#: lib/regcomp.c:143
msgid "Unmatched [, [^, [:, [., or [="
msgstr "沒有符合的 [、[^、[:、[. 或 [="

#: lib/regcomp.c:146
msgid "Unmatched ( or \\("
msgstr "未匹配的「(」或「\\」"

#: lib/regcomp.c:149
msgid "Unmatched \\{"
msgstr "未匹配的「\\{」"

#: lib/regcomp.c:152
msgid "Invalid content of \\{\\}"
msgstr "不正確的「\\{\\}」內容"

#: lib/regcomp.c:155
msgid "Invalid range end"
msgstr "不正確的範圍結束"

#: lib/regcomp.c:158
msgid "Memory exhausted"
msgstr "記憶體耗盡"

#: lib/regcomp.c:161
msgid "Invalid preceding regular expression"
msgstr "不正確的前導正規表示式"

#: lib/regcomp.c:164
msgid "Premature end of regular expression"
msgstr "正規表示式的過早結束"

#: lib/regcomp.c:167
msgid "Regular expression too big"
msgstr "正規表示式太大"

#: lib/regcomp.c:170
msgid "Unmatched ) or \\)"
msgstr "未匹配的「)」或「\\」"

#: lib/regcomp.c:650
msgid "No previous regular expression"
msgstr "沒有先前的正規表示式"

#: lib/set-acl.c:46
#, c-format
msgid "setting permissions for %s"
msgstr "正在為 %s 設定權限"

#: lib/version-etc.c:73
#, c-format
msgid "Packaged by %s (%s)\n"
msgstr "由 %s (%s) 打包\n"

#: lib/version-etc.c:76
#, c-format
msgid "Packaged by %s\n"
msgstr "由 %s 打包\n"

#. TRANSLATORS: Translate "(C)" to the copyright symbol
#. (C-in-a-circle), if this symbol is available in the user's
#. locale.  Otherwise, do not translate "(C)"; leave it as-is.
#: lib/version-etc.c:83
msgid "(C)"
msgstr "(C)"

#. TRANSLATORS: The %s placeholder is the web address of the GPL license.
#: lib/version-etc.c:88
#, c-format
msgid ""
"License GPLv3+: GNU GPL version 3 or later <%s>.\n"
"This is free software: you are free to change and redistribute it.\n"
"There is NO WARRANTY, to the extent permitted by law.\n"
msgstr ""
"GPLv3+ 授權：GNU GPL 第三版或更新版本 <%s>。\n"
"此為自由軟體：您能修改與重散布它。\n"
"在法律允許的範圍內沒有任何擔保。\n"

#. TRANSLATORS: %s denotes an author name.
#: lib/version-etc.c:105
#, c-format
msgid "Written by %s.\n"
msgstr "由 %s 編寫。\n"

#. TRANSLATORS: Each %s denotes an author name.
#: lib/version-etc.c:109
#, c-format
msgid "Written by %s and %s.\n"
msgstr "由 %s 與 %s 編寫。\n"

#. TRANSLATORS: Each %s denotes an author name.
#: lib/version-etc.c:113
#, c-format
msgid "Written by %s, %s, and %s.\n"
msgstr "由 %s、%s 與 %s 編寫。\n"

#. TRANSLATORS: Each %s denotes an author name.
#. You can use line breaks, estimating that each author name occupies
#. ca. 16 screen columns and that a screen line has ca. 80 columns.
#: lib/version-etc.c:120
#, c-format
msgid ""
"Written by %s, %s, %s,\n"
"and %s.\n"
msgstr "由 %s、%s、%s 與 %s 編寫。\n"

#. TRANSLATORS: Each %s denotes an author name.
#. You can use line breaks, estimating that each author name occupies
#. ca. 16 screen columns and that a screen line has ca. 80 columns.
#: lib/version-etc.c:127
#, c-format
msgid ""
"Written by %s, %s, %s,\n"
"%s, and %s.\n"
msgstr ""
"由 %s、%s、%s、%s\n"
"與 %s 編寫。\n"

#. TRANSLATORS: Each %s denotes an author name.
#. You can use line breaks, estimating that each author name occupies
#. ca. 16 screen columns and that a screen line has ca. 80 columns.
#: lib/version-etc.c:134
#, c-format
msgid ""
"Written by %s, %s, %s,\n"
"%s, %s, and %s.\n"
msgstr ""
"由 %s、%s、%s、%s、\n"
"%s 與 %s 編寫。\n"

#. TRANSLATORS: Each %s denotes an author name.
#. You can use line breaks, estimating that each author name occupies
#. ca. 16 screen columns and that a screen line has ca. 80 columns.
#: lib/version-etc.c:142
#, c-format
msgid ""
"Written by %s, %s, %s,\n"
"%s, %s, %s, and %s.\n"
msgstr ""
"由 %s、%s、%s、%s、\n"
"%s 、%s 與 %s 編寫。\n"

#. TRANSLATORS: Each %s denotes an author name.
#. You can use line breaks, estimating that each author name occupies
#. ca. 16 screen columns and that a screen line has ca. 80 columns.
#: lib/version-etc.c:150
#, c-format
msgid ""
"Written by %s, %s, %s,\n"
"%s, %s, %s, %s,\n"
"and %s.\n"
msgstr ""
"由 %s、%s、%s、%s、\n"
"%s 、%s、%s 與 %s 編寫。\n"

#. TRANSLATORS: Each %s denotes an author name.
#. You can use line breaks, estimating that each author name occupies
#. ca. 16 screen columns and that a screen line has ca. 80 columns.
#: lib/version-etc.c:159
#, c-format
msgid ""
"Written by %s, %s, %s,\n"
"%s, %s, %s, %s,\n"
"%s, and %s.\n"
msgstr ""
"由 %s、%s、%s、%s、\n"
"%s 、%s、%s、\n"
"%s 與 %s 編寫。\n"

#. TRANSLATORS: Each %s denotes an author name.
#. You can use line breaks, estimating that each author name occupies
#. ca. 16 screen columns and that a screen line has ca. 80 columns.
#: lib/version-etc.c:170
#, c-format
msgid ""
"Written by %s, %s, %s,\n"
"%s, %s, %s, %s,\n"
"%s, %s, and others.\n"
msgstr ""
"由 %s、%s、%s、%s、\n"
"%s 、%s、%s、\n"
"%s、%s 與其他人編寫。\n"

#. TRANSLATORS: The placeholder indicates the bug-reporting address
#. for this package.  Please add _another line_ saying
#. "Report translation bugs to <...>\n" with the address for translation
#. bugs (typically your translation team's web or email address).
#: lib/version-etc.c:249
#, c-format
msgid "Report bugs to: %s\n"
msgstr "回報漏洞至：%s\n"

#: lib/version-etc.c:251
#, c-format
msgid "Report %s bugs to: %s\n"
msgstr "回報 %s 的漏洞到：%s\n"

#: lib/version-etc.c:255 lib/version-etc.c:257
#, c-format
msgid "%s home page: <%s>\n"
msgstr "%s 的首頁：<%s>\n"

#: lib/version-etc.c:260
#, c-format
msgid "General help using GNU software: <%s>\n"
msgstr "使用 GNU 軟體的一般說明：<%s>\n"

#: sed/compile.c:146
msgid "multiple `!'s"
msgstr "多個「!」"

#: sed/compile.c:147
msgid "unexpected `,'"
msgstr "未預期的「,」"

#: sed/compile.c:149
msgid "invalid usage of +N or ~N as first address"
msgstr "無法將 +N 或 ~N 作為第一個位址"

#: sed/compile.c:150
msgid "unmatched `{'"
msgstr "未匹配的「{」"

#: sed/compile.c:151
msgid "unexpected `}'"
msgstr "未預期的「}」"

#: sed/compile.c:153
msgid "extra characters after command"
msgstr "命令後含有多餘的字元"

#: sed/compile.c:155
msgid "expected \\ after `a', `c' or `i'"
msgstr "預期在「a」、「c」或「i」之後出現 \\"

#: sed/compile.c:157
msgid "`}' doesn't want any addresses"
msgstr "「}」不需要任何位址"

#: sed/compile.c:159
msgid ": doesn't want any addresses"
msgstr ": 不需要任何位址"

#: sed/compile.c:161
msgid "comments don't accept any addresses"
msgstr "備註不接受任何位址"

#: sed/compile.c:162
msgid "missing command"
msgstr "遺漏命令"

#: sed/compile.c:163
msgid "command only uses one address"
msgstr "命令只使用一個位址"

#: sed/compile.c:165
msgid "unterminated address regex"
msgstr "未結束的位址正規表示式"

#: sed/compile.c:166
msgid "unterminated `s' command"
msgstr "未結束的「s」命令"

#: sed/compile.c:167
msgid "unterminated `y' command"
msgstr "未結束的「y」命令"

#: sed/compile.c:168
msgid "unknown option to `s'"
msgstr "「s」的未知選項"

#: sed/compile.c:170
msgid "multiple `p' options to `s' command"
msgstr "多個「s」命令的選項「p」"

#: sed/compile.c:172
msgid "multiple `g' options to `s' command"
msgstr "多個「s」命令的選項「g」"

#: sed/compile.c:174
msgid "multiple number options to `s' command"
msgstr "多個「s」命令的數值選項"

#: sed/compile.c:176
msgid "number option to `s' command may not be zero"
msgstr "「s」命令的數值選項不能為零"

#: sed/compile.c:178
msgid "strings for `y' command are different lengths"
msgstr "y 命令的字串長度不同"

#: sed/compile.c:180
msgid "delimiter character is not a single-byte character"
msgstr "分隔字元不是單一位元字元"

#: sed/compile.c:182
msgid "expected newer version of sed"
msgstr "預期使用新版的 sed"

#: sed/compile.c:184
msgid "invalid usage of line address 0"
msgstr "非法使用位址第 0 列"

#: sed/compile.c:185
#, c-format
msgid "unknown command: `%c'"
msgstr "未知的命令: 「%c」"

#: sed/compile.c:187
msgid "incomplete command"
msgstr "不完全的指令"

#: sed/compile.c:189
msgid "\":\" lacks a label"
msgstr "「:」缺少標籤"

#: sed/compile.c:191
msgid "recursive escaping after \\c not allowed"
msgstr "不允許在「\\c」之後加入遞迴跳脫字元"

#: sed/compile.c:193
msgid "e/r/w commands disabled in sandbox mode"
msgstr "e/r/w 指令已在沙盒模式中停用"

#: sed/compile.c:218
#, c-format
msgid "%s: file %s line %lu: %s\n"
msgstr "%s: 檔案 %s 列號: %lu: %s\n"

#: sed/compile.c:221
#, c-format
msgid "%s: -e expression #%lu, char %lu: %s\n"
msgstr "%s: -e 表示式 #%lu，字元 %lu: %s\n"

#: sed/compile.c:1625
#, c-format
msgid "can't find label for jump to `%s'"
msgstr "無法為目的是「%s」的跳移找到標籤"

#: sed/execute.c:253 sed/execute.c:270
#, c-format
msgid "case conversion produced an invalid character"
msgstr "大小寫轉換產生了無效字元"

#: sed/execute.c:565
#, c-format
msgid "%s: can't read %s: %s\n"
msgstr "%s: 無法讀取 %s: %s\n"

#: sed/execute.c:591
#, c-format
msgid "couldn't edit %s: is a terminal"
msgstr "無法編輯 %s: 是一個終端機"

#: sed/execute.c:596
#, c-format
msgid "couldn't edit %s: not a regular file"
msgstr "無法編輯 %s: 不是一個正常檔案"

#: sed/execute.c:607
#, c-format
msgid "%s: warning: failed to set default file creation context to %s: %s"
msgstr "%s：警告：無法設定 %s：%s 的預設檔案建立語境"

#: sed/execute.c:615
#, c-format
msgid "%s: warning: failed to get security context of %s: %s"
msgstr "%s：警告：無法提取 %s：%s 的安全語境"

#: sed/execute.c:633 sed/utils.c:215
#, c-format
msgid "couldn't open temporary file %s: %s"
msgstr "無法打開暫存檔案 %s: %s"

#: sed/execute.c:1170 sed/execute.c:1369
msgid "error in subprocess"
msgstr "錯誤發生於副行程中"

#: sed/execute.c:1172
msgid "option `e' not supported"
msgstr "不支援選項「e」"

#: sed/execute.c:1350
msgid "`e' command not supported"
msgstr "不支援命令「e」"

#: sed/execute.c:1672
msgid "no input files"
msgstr "沒有輸入檔案"

#: sed/regexp.c:40
msgid "no previous regular expression"
msgstr "不存在之前的正規表示式"

#: sed/regexp.c:125
#, c-format
msgid "invalid reference \\%d on `s' command's RHS"
msgstr "「s」命令的 RHS 上不正確的參考值 \\%d"

#: sed/regexp.c:196
msgid "regex input buffer length larger than INT_MAX"
msgstr "正規表達式緩衝區長度大於 INT_MAX"

#: sed/sed.c:37
msgid "Jay Fenlason"
msgstr "Jay Fenlason"

#: sed/sed.c:38
msgid "Tom Lord"
msgstr "Tom Lord"

#: sed/sed.c:39
msgid "Ken Pizzini"
msgstr "Ken Pizzini"

#: sed/sed.c:40
msgid "Paolo Bonzini"
msgstr "Paolo Bonzini"

#: sed/sed.c:41
msgid "Jim Meyering"
msgstr "Jim Meyering"

#: sed/sed.c:42
msgid "Assaf Gordon"
msgstr "Assaf Gordon"

#: sed/sed.c:103
#, c-format
msgid ""
"GNU sed home page: <https://www.gnu.org/software/sed/>.\n"
"General help using GNU software: <https://www.gnu.org/gethelp/>.\n"
msgstr ""
"GNU sed 首頁：<https://www.gnu.org/software/sed/>。\n"
"使用 GNU 軟體的一般說明：<https://www.gnu.org/gethelp/>。\n"

#: sed/sed.c:109
#, c-format
msgid "E-mail bug reports to: <%s>.\n"
msgstr "將漏洞回報傳到該 E-mail：<%s>。\n"

#: sed/sed.c:117
msgid "This sed program was built with SELinux support."
msgstr "這個 sed 程式編譯時帶有 SELinux 支援。"

#: sed/sed.c:119
msgid "SELinux is enabled on this system."
msgstr "此系統有啟用 SELinux。"

#: sed/sed.c:121
msgid "SELinux is disabled on this system."
msgstr "此系統未啟用 SELinux。"

#: sed/sed.c:123
msgid "This sed program was built without SELinux support."
msgstr "這個 sed 程式編譯時不帶有 SELinux 支援。"

#: sed/sed.c:133
#, c-format
msgid ""
"Usage: %s [OPTION]... {script-only-if-no-other-script} [input-file]...\n"
"\n"
msgstr ""
"用法: %s [選項]... {若無其他命令稿則只能放命令稿} [輸入檔]...\n"
"\n"

#: sed/sed.c:137
#, c-format
msgid ""
"  -n, --quiet, --silent\n"
"                 suppress automatic printing of pattern space\n"
msgstr ""
"  -n, --quiet, --silent\n"
"                 抑止樣版空間的自動顯示\n"

#: sed/sed.c:139
#, c-format
msgid ""
"      --debug\n"
"                 annotate program execution\n"
msgstr ""
"      --debug\n"
"                 說明程式執行過程\n"

#: sed/sed.c:141
#, c-format
msgid ""
"  -e script, --expression=script\n"
"                 add the script to the commands to be executed\n"
msgstr ""
"  -e 命令稿, --expression=命令稿\n"
"                 加入命令稿做為執行的命令\n"

#: sed/sed.c:143
#, c-format
msgid ""
"  -f script-file, --file=script-file\n"
"                 add the contents of script-file to the commands to be executed\n"
msgstr ""
"  -f 命令稿檔案, --file=命令稿檔案\n"
"                 加入命令稿檔案內容做為執行的命令\n"

#: sed/sed.c:147
#, c-format
msgid ""
"  --follow-symlinks\n"
"                 follow symlinks when processing in place\n"
msgstr ""
"  --follow-symlinks\n"
"                 就地處理時追隨符號連結\n"

#: sed/sed.c:150
#, c-format
msgid ""
"  -i[SUFFIX], --in-place[=SUFFIX]\n"
"                 edit files in place (makes backup if SUFFIX supplied)\n"
msgstr ""
"  -i[SUFFIX], --in-place[=SUFFIX]\n"
"                 一次編輯檔案 (若提供 SUFFIX 則建立備份)\n"

#: sed/sed.c:153
#, c-format
msgid ""
"  -b, --binary\n"
"                 open files in binary mode (CR+LFs are not processed specially)\n"
msgstr ""
"  -b, --binary\n"
"                 以二進位模式開啟檔案 (並未特殊處理 CR+LF)\n"

#: sed/sed.c:157
#, c-format
msgid ""
"  -l N, --line-length=N\n"
"                 specify the desired line-wrap length for the `l' command\n"
msgstr ""
"  -l N, --line-length=N\n"
"                 指定使用「l」命令時想要的換列長度\n"

#: sed/sed.c:159
#, c-format
msgid ""
"  --posix\n"
"                 disable all GNU extensions.\n"
msgstr ""
"  --posix\n"
"                 停用所有 GNU 擴充功能。\n"

#: sed/sed.c:161
#, c-format
msgid ""
"  -E, -r, --regexp-extended\n"
"                 use extended regular expressions in the script\n"
"                 (for portability use POSIX -E).\n"
msgstr ""
"  -E, -r, --regexp-extended\n"
"                 在指令中使用延伸正規表達式\n"
"                 (若要可攜性請使用 POSIX -E)。\n"

#: sed/sed.c:164
#, c-format
msgid ""
"  -s, --separate\n"
"                 consider files as separate rather than as a single,\n"
"                 continuous long stream.\n"
msgstr ""
"  -s, --separate\n"
"                 將檔案視為各自分離而非單一且\n"
"                 連續的長字串。\n"

#: sed/sed.c:167
#, c-format
msgid ""
"      --sandbox\n"
"                 operate in sandbox mode (disable e/r/w commands).\n"
msgstr ""
"      --sandbox\n"
"                 在沙盒模式中操作 (停用 e/r/w 指令)。\n"

#: sed/sed.c:169
#, c-format
msgid ""
"  -u, --unbuffered\n"
"                 load minimal amounts of data from the input files and flush\n"
"                 the output buffers more often\n"
msgstr ""
"  -u, --unbuffered\n"
"                 從輸入檔中讀取最少量的資料並更常清空輸出緩衝區\n"

#: sed/sed.c:172
#, c-format
msgid ""
"  -z, --null-data\n"
"                 separate lines by NUL characters\n"
msgstr ""
"  -z, --null-data\n"
"                 以 NUL 字元分割行列\n"

#: sed/sed.c:174
#, c-format
msgid "      --help     display this help and exit\n"
msgstr "      --help     顯示本輔助訊息並離開\n"

#: sed/sed.c:175
#, c-format
msgid "      --version  output version information and exit\n"
msgstr "      --version  輸出版本資訊並離開\n"

#: sed/sed.c:176
#, c-format
msgid ""
"\n"
"If no -e, --expression, -f, or --file option is given, then the first\n"
"non-option argument is taken as the sed script to interpret.  All\n"
"remaining arguments are names of input files; if no input files are\n"
"specified, then the standard input is read.\n"
"\n"
msgstr ""
"\n"
"如果未設定 -e, --expression, -f, 或 --file 選項，那麼第一個不是選項的\n"
"引數就會被當做 sed 的命令稿來解譯。所有剩下的引數則是輸入檔的名稱；\n"
"假如未指定輸入檔，就會從標準輸入來讀取。\n"
"\n"

#: sed/sed.c:369
msgid "failed to set binary mode on STDIN"
msgstr "無法在 STDIN 設定二進位模式"

#: sed/sed.c:371
msgid "failed to set binary mode on STDOUT"
msgstr "無法在 STDOUT 設定二進位模式"

#: sed/utils.c:129
#, c-format
msgid "couldn't open file %s: %s"
msgstr "無法打開檔案 %s: %s"

#: sed/utils.c:148
#, c-format
msgid "couldn't attach to %s: %s"
msgstr "無法附加到 %s：%s"

#: sed/utils.c:207
#, c-format
msgid "failed to set binary mode on '%s'"
msgstr "無法在「%s」設定二進位模式"

#: sed/utils.c:228
#, c-format
msgid "couldn't write %llu item to %s: %s"
msgid_plural "couldn't write %llu items to %s: %s"
msgstr[0] "無法將 %llu 個項目寫到 %s：%s"

#: sed/utils.c:240 sed/utils.c:259
#, c-format
msgid "read error on %s: %s"
msgstr "讀取 %s 時出錯: %s"

#: sed/utils.c:358
#, c-format
msgid "couldn't readlink %s: %s"
msgstr "無法 readlink %s：%s"

#: sed/utils.c:361
#, c-format
msgid "couldn't follow symlink %s: %s"
msgstr "無法追隨符號連結 %s：%s"

#: sed/utils.c:408
#, c-format
msgid "cannot rename %s: %s"
msgstr "無法更改名稱 %s: %s"

#~ msgid "%s: option '%s%s' is ambiguous\n"
#~ msgstr "%s：「%s%s」選項不明確\n"

#~ msgid "%s: option '%s%s' is ambiguous; possibilities:"
#~ msgstr "%s：「%s%s」選項不明確；可能是："

#~ msgid "%s: unrecognized option '%s%s'\n"
#~ msgstr "%s：無法識別的選項「%s%s」\n"

#~ msgid "%s: option '%s%s' doesn't allow an argument\n"
#~ msgstr "%s：「%s%s」選項不允許引數\n"

#~ msgid "%s: option '%s%s' requires an argument\n"
#~ msgstr "%s：「%s%s」選項需要引數\n"

#~ msgid "%s: invalid option -- '%c'\n"
#~ msgstr "%s：無效選項 --「%c」\n"

#~ msgid "%s: option requires an argument -- '%c'\n"
#~ msgstr "%s：選項需要引數 --「%c」\n"

#~ msgid "cannot remove %s: %s"
#~ msgstr "無法移除 %s: %s"

#~ msgid "cannot stat %s: %s"
#~ msgstr "無法取得狀態 %s：%s"

#~ msgid "%s home page: <https://www.gnu.org/software/%s/>\n"
#~ msgstr "%s 的首頁：<https://www.gnu.org/software/%s/>\n"

#~ msgid ""
#~ "  -R, --regexp-perl\n"
#~ "                 use Perl 5's regular expressions syntax in the script.\n"
#~ msgstr ""
#~ "  -R, --regexp-perl\n"
#~ "                 在命令稿中使用 Perl 5 的正規表示式語法。\n"

#~ msgid "cannot specify modifiers on empty regexp"
#~ msgstr "無法指定修飾字元給空的正規表示式"

#~ msgid ""
#~ "E-mail bug reports to: <%s>.\n"
#~ "Be sure to include the word ``%s'' somewhere in the ``Subject:'' field.\n"
#~ msgstr ""
#~ "將錯誤報告以電子郵件寄到：<%s>。\n"
#~ "請記得在『 主旨：』欄位中包含字詞『%s』。\n"

#~ msgid "super-sed version %s\n"
#~ msgstr "超級 sed 版本 %s\n"

#~ msgid ""
#~ "based on GNU sed version %s\n"
#~ "\n"
#~ msgstr ""
#~ "基於 GNU sed 版本 %s\n"
#~ "\n"

#~ msgid "GNU sed version %s\n"
#~ msgstr "GNU sed 版本 %s\n"

#~ msgid ""
#~ "Copyright (C) %d Free Software Foundation, Inc.\n"
#~ "This is free software; see the source for copying conditions.  There is NO\n"
#~ "warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE,\n"
#~ "to the extent permitted by law.\n"
#~ msgstr ""
#~ "著作權 © %d 自由軟體基金會。\n"
#~ "這是自由軟體；複製條件請參看原始碼。 沒有任何\n"
#~ "擔保；在法律所允許的範圍內，甚至不含對於某一特定目的之\n"
#~ "適售性與適用性。\n"