# SPDX-License-Identifier: 0BSD # # Ukrainian translation for xz-man. # This file is published under the BSD Zero Clause License. # Copyright (C) The XZ Utils authors and contributors # # Yuri Chornoivan , 2019, 2022, 2023, 2024. msgid "" msgstr "" "Project-Id-Version: xz-man-5.6.0-pre2\n" "POT-Creation-Date: 2024-02-15 01:58+0800\n" "PO-Revision-Date: 2024-02-15 17:53+0200\n" "Last-Translator: Yuri Chornoivan \n" "Language-Team: Ukrainian \n" "Language: uk\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Bugs: Report translation errors to the Language-Team address.\n" "Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n" "X-Generator: Lokalize 23.04.1\n" #. type: TH #: ../src/xz/xz.1:7 #, no-wrap msgid "XZ" msgstr "XZ" #. type: TH #: ../src/xz/xz.1:7 ../src/scripts/xzdiff.1:8 ../src/scripts/xzgrep.1:8 #, no-wrap msgid "2024-02-13" msgstr "13 лютого 2024 року" #. type: TH #: ../src/xz/xz.1:7 ../src/xzdec/xzdec.1:5 ../src/lzmainfo/lzmainfo.1:5 #: ../src/scripts/xzdiff.1:8 ../src/scripts/xzgrep.1:8 #: ../src/scripts/xzless.1:8 ../src/scripts/xzmore.1:8 #, no-wrap msgid "Tukaani" msgstr "Tukaani" #. type: TH #: ../src/xz/xz.1:7 ../src/xzdec/xzdec.1:5 ../src/lzmainfo/lzmainfo.1:5 #: ../src/scripts/xzdiff.1:8 ../src/scripts/xzgrep.1:8 #: ../src/scripts/xzless.1:8 ../src/scripts/xzmore.1:8 #, no-wrap msgid "XZ Utils" msgstr "XZ Utils" #. type: SH #: ../src/xz/xz.1:9 ../src/xzdec/xzdec.1:6 ../src/lzmainfo/lzmainfo.1:6 #: ../src/scripts/xzdiff.1:9 ../src/scripts/xzgrep.1:9 #: ../src/scripts/xzless.1:9 ../src/scripts/xzmore.1:9 #, no-wrap msgid "NAME" msgstr "НАЗВА" #. type: Plain text #: ../src/xz/xz.1:11 msgid "xz, unxz, xzcat, lzma, unlzma, lzcat - Compress or decompress .xz and .lzma files" msgstr "xz, unxz, xzcat, lzma, unlzma, lzcat — стискання та розпаковування файлів .xz і .lzma" #. type: SH #: ../src/xz/xz.1:12 ../src/xzdec/xzdec.1:8 ../src/lzmainfo/lzmainfo.1:8 #: ../src/scripts/xzdiff.1:12 ../src/scripts/xzgrep.1:12 #: ../src/scripts/xzless.1:11 ../src/scripts/xzmore.1:12 #, no-wrap msgid "SYNOPSIS" msgstr "КОРОТКИЙ ОПИС" #. type: Plain text #: ../src/xz/xz.1:16 msgid "B [I] [I]" msgstr "B [I<параметр...>] [I<файл...>]" #. type: SH #: ../src/xz/xz.1:17 #, no-wrap msgid "COMMAND ALIASES" msgstr "СКОРОЧЕННЯ КОМАНД" #. type: Plain text #: ../src/xz/xz.1:21 msgid "B is equivalent to B." msgstr "B є рівноцінним до B." #. type: Plain text #: ../src/xz/xz.1:25 msgid "B is equivalent to B." msgstr "B є рівноцінним до B." #. type: Plain text #: ../src/xz/xz.1:29 msgid "B is equivalent to B." msgstr "B є рівноцінним до B." #. type: Plain text #: ../src/xz/xz.1:33 msgid "B is equivalent to B." msgstr "B є рівноцінним до B." #. type: Plain text #: ../src/xz/xz.1:37 msgid "B is equivalent to B." msgstr "B є рівноцінним до B." #. type: Plain text #: ../src/xz/xz.1:49 msgid "When writing scripts that need to decompress files, it is recommended to always use the name B with appropriate arguments (B or B) instead of the names B and B." msgstr "При написанні скриптів, де потрібно розпаковувати файли, рекомендуємо завжди використовувати B із відповідними аргументами (B або B), замість B і B." #. type: SH #: ../src/xz/xz.1:50 ../src/xzdec/xzdec.1:16 ../src/lzmainfo/lzmainfo.1:13 #: ../src/scripts/xzdiff.1:27 ../src/scripts/xzgrep.1:33 #: ../src/scripts/xzless.1:17 ../src/scripts/xzmore.1:19 #, no-wrap msgid "DESCRIPTION" msgstr "ОПИС" #. type: Plain text #: ../src/xz/xz.1:69 msgid "B is a general-purpose data compression tool with command line syntax similar to B(1) and B(1). The native file format is the B<.xz> format, but the legacy B<.lzma> format used by LZMA Utils and raw compressed streams with no container format headers are also supported. In addition, decompression of the B<.lz> format used by B is supported." msgstr "B інструмент загального призначення для стискання даних із синтаксисом командного рядка, подібним для B(1) і B(1). Власним форматом файлів є B<.xz>, але передбачено підтримку застарілого формату B<.lzma>, який було використано у LZMA Utils, та необроблених потоків стиснених даних без заголовків формату контейнера. Крім того, передбачено підтримку розпаковування формату B<.lz>, який використано у B." #. type: Plain text #: ../src/xz/xz.1:91 msgid "B compresses or decompresses each I according to the selected operation mode. If no I are given or I is B<->, B reads from standard input and writes the processed data to standard output. B will refuse (display an error and skip the I) to write compressed data to standard output if it is a terminal. Similarly, B will refuse to read compressed data from standard input if it is a terminal." msgstr "B стискає або розпаковує кожен I<файл> відповідно до вибраного режиму дій. Якщо I<файли> не задано або якщо I<файлом> є B<->, B читатиме дані зі стандартного джерела вхідних даних і записуватиме оброблені дані до стандартного виведення. B відмовить (покаже повідомлення про помилку і пропустить I<файл>) у записів стиснених даних до стандартного виведення, якщо це термінал. Так само, B відмовить у читанні стиснених даних зі стандартного джерела вхідних даних, якщо це термінал." #. type: Plain text #: ../src/xz/xz.1:101 msgid "Unless B<--stdout> is specified, I other than B<-> are written to a new file whose name is derived from the source I name:" msgstr "Якщо не вказано B<--stdout>, I<файли>, відмінні від B<->, буде записано до нового файла, чию назву буде визначено з назви початкового I<файла>:" #. type: IP #: ../src/xz/xz.1:101 ../src/xz/xz.1:107 ../src/xz/xz.1:132 ../src/xz/xz.1:137 #: ../src/xz/xz.1:140 ../src/xz/xz.1:143 ../src/xz/xz.1:159 ../src/xz/xz.1:420 #: ../src/xz/xz.1:423 ../src/xz/xz.1:430 ../src/xz/xz.1:675 ../src/xz/xz.1:677 #: ../src/xz/xz.1:776 ../src/xz/xz.1:787 ../src/xz/xz.1:796 ../src/xz/xz.1:802 #: ../src/xz/xz.1:965 ../src/xz/xz.1:969 ../src/xz/xz.1:973 ../src/xz/xz.1:977 #: ../src/xz/xz.1:981 ../src/xz/xz.1:983 ../src/xz/xz.1:1079 #: ../src/xz/xz.1:1088 ../src/xz/xz.1:1100 ../src/xz/xz.1:1837 #: ../src/xz/xz.1:1843 ../src/xz/xz.1:1884 ../src/xz/xz.1:1889 #: ../src/xz/xz.1:1904 ../src/xz/xz.1:1908 ../src/xz/xz.1:1986 #: ../src/xz/xz.1:1990 ../src/xz/xz.1:1993 ../src/xz/xz.1:1996 #: ../src/xz/xz.1:2000 ../src/xz/xz.1:2007 ../src/xz/xz.1:2009 #, no-wrap msgid "\\(bu" msgstr "\\(bu" #. type: Plain text #: ../src/xz/xz.1:107 msgid "When compressing, the suffix of the target file format (B<.xz> or B<.lzma>) is appended to the source filename to get the target filename." msgstr "При стисканні суфікс формату файла призначення (B<.xz> або B<.lzma>) буде дописано до назви початкового файла для отримання назви файла призначення." #. type: Plain text #: ../src/xz/xz.1:122 msgid "When decompressing, the B<.xz>, B<.lzma>, or B<.lz> suffix is removed from the filename to get the target filename. B also recognizes the suffixes B<.txz> and B<.tlz>, and replaces them with the B<.tar> suffix." msgstr "При розпаковуванні суфікс B<.xz>, B<.lzma> або B<.lz> буде вилучено з назви файла для отримання назви файла призначення. Крім того, B розпізнає суфікси B<.txz> і B<.tlz> і замінює їх на суфікс B<.tar>." #. type: Plain text #: ../src/xz/xz.1:126 msgid "If the target file already exists, an error is displayed and the I is skipped." msgstr "Якщо файл призначення вже існує, буде показано повідомлення про помилку, а I<файл> буде пропущено." #. type: Plain text #: ../src/xz/xz.1:132 msgid "Unless writing to standard output, B will display a warning and skip the I if any of the following applies:" msgstr "Окрім випадку запису до стандартного виведення, B покаже попередження і пропустить обробку I<файла>, якщо буде виконано будь-яку з таких умов:" #. type: Plain text #: ../src/xz/xz.1:137 msgid "I is not a regular file. Symbolic links are not followed, and thus they are not considered to be regular files." msgstr "I<Файл> не є звичайним файлом. Програма не переходитиме за символічними посиланнями, а отже, не вважатиме їх звичайними файлами." #. type: Plain text #: ../src/xz/xz.1:140 msgid "I has more than one hard link." msgstr "На I<файл> існує декілька жорстких посилань." #. type: Plain text #: ../src/xz/xz.1:143 msgid "I has setuid, setgid, or sticky bit set." msgstr "Для I<файла> встановлено setuid, setgid або «липкий» біт." #. type: Plain text #: ../src/xz/xz.1:159 msgid "The operation mode is set to compress and the I already has a suffix of the target file format (B<.xz> or B<.txz> when compressing to the B<.xz> format, and B<.lzma> or B<.tlz> when compressing to the B<.lzma> format)." msgstr "Режим дій встановлено у значення «стискання», і I<файл> вже має суфікс назви формату файла призначення (B<.xz> або B<.txz> при стисканні до формату B<.xz>, і B<.lzma> або B<.tlz> при стисканні до формату B<.lzma>)." #. type: Plain text #: ../src/xz/xz.1:169 msgid "The operation mode is set to decompress and the I doesn't have a suffix of any of the supported file formats (B<.xz>, B<.txz>, B<.lzma>, B<.tlz>, or B<.lz>)." msgstr "Режим дій встановлено у значення «розпаковування», і I<файл> не має суфікса назви жодного з підтримуваних форматів (B<.xz>, B<.txz>, B<.lzma>, B<.tlz> або B<.lz>)." #. type: Plain text #: ../src/xz/xz.1:184 msgid "After successfully compressing or decompressing the I, B copies the owner, group, permissions, access time, and modification time from the source I to the target file. If copying the group fails, the permissions are modified so that the target file doesn't become accessible to users who didn't have permission to access the source I. B doesn't support copying other metadata like access control lists or extended attributes yet." msgstr "Після успішного стискання або розпаковування I<файла>, B копіює дані щодо власника, групи, прав доступу, часу доступу та моменту внесення змін з початкового I<файла> до файла призначення. Якщо копіювання даних щодо групи зазнає невдачі, права доступу буде змінено так, що файл призначення стане недоступним для користувачів, які не мають права доступу до початкового I<файла>. В B ще не передбачено підтримки копіювання інших метаданих, зокрема списків керування доступом або розширених атрибутів." #. type: Plain text #: ../src/xz/xz.1:194 msgid "Once the target file has been successfully closed, the source I is removed unless B<--keep> was specified. The source I is never removed if the output is written to standard output or if an error occurs." msgstr "Щойно файл призначення буде успішно закрито, початковий I<файл> буде вилучено, якщо не вказано параметра B<--keep>. Початковий I<файл> ніколи не буде вилучено, якщо виведені дані буде записано до стандартного виведення або якщо станеться помилка." #. type: Plain text #: ../src/xz/xz.1:206 msgid "Sending B or B to the B process makes it print progress information to standard error. This has only limited use since when standard error is a terminal, using B<--verbose> will display an automatically updating progress indicator." msgstr "Надсилання B або B до процесу B призводить до виведення даних щодо поступу до стандартного виведення помилок. Це має лише обмежене використання, оскільки якщо стандартним виведенням помилок є термінал, використання B<--verbose> призведе до показу автоматично оновлюваного індикатора поступу." #. type: SS #: ../src/xz/xz.1:207 #, no-wrap msgid "Memory usage" msgstr "Використання пам'яті" #. type: Plain text #: ../src/xz/xz.1:223 msgid "The memory usage of B varies from a few hundred kilobytes to several gigabytes depending on the compression settings. The settings used when compressing a file determine the memory requirements of the decompressor. Typically the decompressor needs 5\\ % to 20\\ % of the amount of memory that the compressor needed when creating the file. For example, decompressing a file created with B currently requires 65\\ MiB of memory. Still, it is possible to have B<.xz> files that require several gigabytes of memory to decompress." msgstr "Використання B пам'яті може бути різним: від декількох сотень кілобайтів до декількох гігабайтів, залежно від параметрів стискання. Параметри, які використано при стисканні файла, визначають вимоги до об'єму пам'яті при розпакуванні. Типово, засобу розпаковування потрібно від 5\\ % до 20\\ % об'єму пам'яті, якого засіб стискання потребує при створенні файла. Наприклад, розпаковування файла, який створено з використанням B, у поточній версії потребує 65\\ МіБ пам'яті. Втім, можливе створення файлів B<.xz>, які потребуватимуть для розпаковування декількох гігабайтів пам'яті." #. type: Plain text #: ../src/xz/xz.1:235 msgid "Especially users of older systems may find the possibility of very large memory usage annoying. To prevent uncomfortable surprises, B has a built-in memory usage limiter, which is disabled by default. While some operating systems provide ways to limit the memory usage of processes, relying on it wasn't deemed to be flexible enough (for example, using B(1) to limit virtual memory tends to cripple B(2))." msgstr "Ймовірність високого рівня використання пам'яті може бути особливо дошкульною для користувачів застарілих комп'ютерів. Щоб запобігти прикрим несподіванкам, у B передбачено вбудований обмежувач пам'яті, який типово вимкнено. Хоча у деяких операційних системах передбачено спосіб обмежити використання пам'яті процесами, сподівання на його ефективність не є аж надто гнучким (наприклад, використання B(1) для обмеження віртуальної пам'яті призводить до викривлення даних B(2))." #. type: Plain text #: ../src/xz/xz.1:257 msgid "The memory usage limiter can be enabled with the command line option B<--memlimit=>I. Often it is more convenient to enable the limiter by default by setting the environment variable B, for example, B. It is possible to set the limits separately for compression and decompression by using B<--memlimit-compress=>I and B<--memlimit-decompress=>I. Using these two options outside B is rarely useful because a single run of B cannot do both compression and decompression and B<--memlimit=>I (or B<-M> I) is shorter to type on the command line." msgstr "Обмежувач пам'яті можна увімкнути за допомогою параметра командного рядка B<--memlimit=>I<обмеження>. Часто, зручніше увімкнути обмежувач на типовому рівні, встановивши значення для змінної середовища B, наприклад, B. Можна встановити обмеження окремо для стискання і розпакування за допомогою B<--memlimit-compress=>I and B<--memlimit-decompress=>I<обмеження>. Використання цих двох параметрів поза B не таке вже і корисне, оскільки одноразовий запуск B не може одночасно призводити до стискання та розпаковування, а набрати у командному рядку B<--memlimit=>I<обмеження> (або B<-M> I<обмеження>) набагато швидше." #. type: Plain text #: ../src/xz/xz.1:276 msgid "If the specified memory usage limit is exceeded when decompressing, B will display an error and decompressing the file will fail. If the limit is exceeded when compressing, B will try to scale the settings down so that the limit is no longer exceeded (except when using B<--format=raw> or B<--no-adjust>). This way the operation won't fail unless the limit is very small. The scaling of the settings is done in steps that don't match the compression level presets, for example, if the limit is only slightly less than the amount required for B, the settings will be scaled down only a little, not all the way down to B." msgstr "Якщо під час розпаковування вказане обмеження буде перевищено, B покаже повідомлення про помилку, а розпаковування файла зазнає невдачі. Якщо обмеження буде перевищено при стисканні, B спробує масштабувати параметри так, щоб не перевищувати обмеження (окрім випадків використання B<--format=raw> або B<--no-adjust>). Отже, дію буде виконано, якщо обмеження не є надто жорстким. Масштабування параметрів буде виконано кроками, які не збігаються із рівнями шаблонів стискання. Наприклад, якщо обмеження лише трохи не вкладається у об'єм потрібний для B, параметри буде змінено лише трохи, не до рівня B." #. type: SS #: ../src/xz/xz.1:277 #, no-wrap msgid "Concatenation and padding with .xz files" msgstr "Поєднання і заповнення з файлами .xz" #. type: Plain text #: ../src/xz/xz.1:285 msgid "It is possible to concatenate B<.xz> files as is. B will decompress such files as if they were a single B<.xz> file." msgstr "Можна поєднати файли B<.xz> без додаткової обробки. B розпакує такі файли так, наче вони є єдиним файлом B<.xz>." #. type: Plain text #: ../src/xz/xz.1:294 msgid "It is possible to insert padding between the concatenated parts or after the last part. The padding must consist of null bytes and the size of the padding must be a multiple of four bytes. This can be useful, for example, if the B<.xz> file is stored on a medium that measures file sizes in 512-byte blocks." msgstr "Можна додати доповнення між з'єднаними частинами або після останньої частини. Доповнення має складатися із нульових байтів і мати розмір, який є кратним до чотирьох байтів. Це може бути корисним, наприклад, якщо файл B<.xz> зберігається на носії даних, де розміри файла вимірюються у 512-байтових блоках." #. type: Plain text #: ../src/xz/xz.1:298 msgid "Concatenation and padding are not allowed with B<.lzma> files or raw streams." msgstr "Поєднання та заповнення не можна використовувати для файлів B<.lzma> або потоків необроблених даних." #. type: SH #: ../src/xz/xz.1:299 ../src/xzdec/xzdec.1:59 #, no-wrap msgid "OPTIONS" msgstr "ПАРАМЕТРИ" #. type: SS #: ../src/xz/xz.1:301 #, no-wrap msgid "Integer suffixes and special values" msgstr "Цілочисельні суфікси і спеціальні значення" #. type: Plain text #: ../src/xz/xz.1:305 msgid "In most places where an integer argument is expected, an optional suffix is supported to easily indicate large integers. There must be no space between the integer and the suffix." msgstr "У більшості місць, де потрібен цілочисельний аргумент, передбачено підтримку необов'язкового суфікса для простого визначення великих цілих чисел. Між цілим числом і суфіксом не повинно бути пробілів." #. type: TP #: ../src/xz/xz.1:305 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: ../src/xz/xz.1:316 msgid "Multiply the integer by 1,024 (2^10). B, B, B, B, and B are accepted as synonyms for B." msgstr "Помножити ціле число на 1024 (2^10). Синонімами B є B, B, B, B та B." #. type: TP #: ../src/xz/xz.1:316 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: ../src/xz/xz.1:326 msgid "Multiply the integer by 1,048,576 (2^20). B, B, B, and B are accepted as synonyms for B." msgstr "Помножити ціле число на 1048576 (2^20). Синонімами B є B, B, B, B та B." #. type: TP #: ../src/xz/xz.1:326 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: ../src/xz/xz.1:336 msgid "Multiply the integer by 1,073,741,824 (2^30). B, B, B, and B are accepted as synonyms for B." msgstr "Помножити ціле число на 1073741824 (2^30). Синонімами B є B, B, B, B та B." #. type: Plain text #: ../src/xz/xz.1:341 msgid "The special value B can be used to indicate the maximum integer value supported by the option." msgstr "Можна скористатися особливим значенням B для позначення максимального цілого значення, підтримку якого передбачено для параметра." #. type: SS #: ../src/xz/xz.1:342 #, no-wrap msgid "Operation mode" msgstr "Режим операції" #. type: Plain text #: ../src/xz/xz.1:345 msgid "If multiple operation mode options are given, the last one takes effect." msgstr "Якщо вказано декілька параметрів режиму дій, буде використано лише останній з них." #. type: TP #: ../src/xz/xz.1:345 #, no-wrap msgid "B<-z>, B<--compress>" msgstr "B<-z>, B<--compress>" #. type: Plain text #: ../src/xz/xz.1:354 msgid "Compress. This is the default operation mode when no operation mode option is specified and no other operation mode is implied from the command name (for example, B implies B<--decompress>)." msgstr "Стиснути. Це типовий режим дій, якщо не вказано параметр режиму дій, а назва команди неявним чином не визначає іншого режиму дій (наприклад, B неявно визначає B<--decompress>)." #. type: TP #: ../src/xz/xz.1:354 ../src/xzdec/xzdec.1:60 #, no-wrap msgid "B<-d>, B<--decompress>, B<--uncompress>" msgstr "B<-d>, B<--decompress>, B<--uncompress>" #. type: Plain text #: ../src/xz/xz.1:357 msgid "Decompress." msgstr "Розпакувати." #. type: TP #: ../src/xz/xz.1:357 #, no-wrap msgid "B<-t>, B<--test>" msgstr "B<-t>, B<--test>" #. type: Plain text #: ../src/xz/xz.1:366 msgid "Test the integrity of compressed I. This option is equivalent to B<--decompress --stdout> except that the decompressed data is discarded instead of being written to standard output. No files are created or removed." msgstr "Перевірити цілісність стиснених файлів I<файли>. Цей параметр еквівалентний до B<--decompress --stdout>, але розпаковані дані буде відкинуто, замість запису до стандартного виведення. Жодних файлів не буде створено або вилучено." #. type: TP #: ../src/xz/xz.1:366 #, no-wrap msgid "B<-l>, B<--list>" msgstr "B<-l>, B<--list>" #. type: Plain text #: ../src/xz/xz.1:375 msgid "Print information about compressed I. No uncompressed output is produced, and no files are created or removed. In list mode, the program cannot read the compressed data from standard input or from other unseekable sources." msgstr "Вивести відомості щодо стиснених файлів I<файли>. Розпакування даних не виконуватиметься, жодних файлів не буде створено або вилучено. У режимі списку програма не може читати дані зі стандартного введення або з інших джерел, де неможливе позиціювання." #. type: Plain text #: ../src/xz/xz.1:390 msgid "The default listing shows basic information about I, one file per line. To get more detailed information, use also the B<--verbose> option. For even more information, use B<--verbose> twice, but note that this may be slow, because getting all the extra information requires many seeks. The width of verbose output exceeds 80 characters, so piping the output to, for example, B may be convenient if the terminal isn't wide enough." msgstr "У типовому списку буде показано базові відомості щодо файлів I<файли>, по одному файлу на рядок. Щоб отримати докладніші відомості, скористайтеся параметром B<--verbose>. Щоб розширити спектр відомостей, скористайтеся параметром B<--verbose> двічі, але зауважте, що це може призвести до значного уповільнення роботи, оскільки отримання додаткових відомостей потребує великої кількості позиціювань. Ширина області докладного виведення даних перевищує 80 символів, тому передавання конвеєром виведених даних, наприклад, до B, може бути зручним способом перегляду даних, якщо термінал недостатньо широкий." #. type: Plain text #: ../src/xz/xz.1:397 msgid "The exact output may vary between B versions and different locales. For machine-readable output, B<--robot --list> should be used." msgstr "Виведені дані залежать від версії B та використаної локалі. Для отримання даних, які будуть придатні до обробки комп'ютером, слід скористатися параметрами B<--robot --list>." #. type: SS #: ../src/xz/xz.1:398 #, no-wrap msgid "Operation modifiers" msgstr "Модифікатори режиму роботи" #. type: TP #: ../src/xz/xz.1:399 ../src/xzdec/xzdec.1:67 #, no-wrap msgid "B<-k>, B<--keep>" msgstr "B<-k>, B<--keep>" #. type: Plain text #: ../src/xz/xz.1:402 msgid "Don't delete the input files." msgstr "Не вилучати вхідні файли." #. type: Plain text #: ../src/xz/xz.1:416 msgid "Since B 5.2.6, this option also makes B compress or decompress even if the input is a symbolic link to a regular file, has more than one hard link, or has the setuid, setgid, or sticky bit set. The setuid, setgid, and sticky bits are not copied to the target file. In earlier versions this was only done with B<--force>." msgstr "Починаючи з версії B 5.2.6, використання цього параметра також наказує B виконувати стискання або розпаковування, навіть якщо вхідними даними є символічне посилання на звичайний файл, файл, який має декілька жорстких посилань, або файл, для якого встановлено setuid, setgid або липкий біт. setuid, setgid та липкий біт не буде скопійовано до файла-результату. У попередніх версіях, ці дії виконувалися, лише якщо було використано параметр B<--force>." #. type: TP #: ../src/xz/xz.1:416 #, no-wrap msgid "B<-f>, B<--force>" msgstr "B<-f>, B<--force>" #. type: Plain text #: ../src/xz/xz.1:419 msgid "This option has several effects:" msgstr "Результатів використання цього параметра буде декілька:" #. type: Plain text #: ../src/xz/xz.1:423 msgid "If the target file already exists, delete it before compressing or decompressing." msgstr "Якщо файл-результат вже існує, вилучити його до стискання або розпаковування." #. type: Plain text #: ../src/xz/xz.1:430 msgid "Compress or decompress even if the input is a symbolic link to a regular file, has more than one hard link, or has the setuid, setgid, or sticky bit set. The setuid, setgid, and sticky bits are not copied to the target file." msgstr "Виконувати стискання або розпаковування, навіть якщо вхідними даними є символічне посилання на звичайний файл, файл, який має декілька жорстких посилань, або файл, для якого встановлено setuid, setgid або липкий біт setuid, setgid та липкий біт не буде скопійовано до файла-результату." #. type: Plain text #: ../src/xz/xz.1:455 msgid "When used with B<--decompress> B<--stdout> and B cannot recognize the type of the source file, copy the source file as is to standard output. This allows B B<--force> to be used like B(1) for files that have not been compressed with B. Note that in future, B might support new compressed file formats, which may make B decompress more types of files instead of copying them as is to standard output. B<--format=>I can be used to restrict B to decompress only a single file format." msgstr "Якщо використано разом із B<--decompress>, B<--stdout>, і B не зможе розпізнати тип початкового файла, копіювати початковий файл без змін до стандартного виведення. Це надає змогу користуватися B B<--force> подібно до B(1) для файлів, які не було стиснено за допомогою B. Зауважте, що у майбутньому у B може бути реалізовано підтримку нових форматів стиснених файлів, замість копіювання їх без змін до стандартного виведення. Можна скористатися B<--format=>I<формат> для обмеження стискання у B єдиним форматом файлів." #. type: TP #: ../src/xz/xz.1:456 ../src/xzdec/xzdec.1:74 #, no-wrap msgid "B<-c>, B<--stdout>, B<--to-stdout>" msgstr "B<-c>, B<--stdout>, B<--to-stdout>" #. type: Plain text #: ../src/xz/xz.1:462 msgid "Write the compressed or decompressed data to standard output instead of a file. This implies B<--keep>." msgstr "Записати стиснені або розпаковані дані до стандартного виведення, а не до файла. Неявним чином встановлює B<--keep>." #. type: TP #: ../src/xz/xz.1:462 #, no-wrap msgid "B<--single-stream>" msgstr "B<--single-stream>" #. type: Plain text #: ../src/xz/xz.1:471 msgid "Decompress only the first B<.xz> stream, and silently ignore possible remaining input data following the stream. Normally such trailing garbage makes B display an error." msgstr "Розпакувати лише перший потік даних B<.xz> і без повідомлень проігнорувати решту вхідних даних, які слідують за цим потоком. Зазвичай, такі зайві дані наприкінці файла призводять до показу B повідомлення про помилку." #. type: Plain text #: ../src/xz/xz.1:480 msgid "B never decompresses more than one stream from B<.lzma> files or raw streams, but this option still makes B ignore the possible trailing data after the B<.lzma> file or raw stream." msgstr "B ніколи не виконуватиме спроби видобути декілька потоків даних з файлів B<.lzma> або необроблених потоків даних, але використання цього параметра все одно наказує B ігнорувати можливі кінцеві дані після файла B<.lzma> або необробленого потоку даних." #. type: Plain text #: ../src/xz/xz.1:485 msgid "This option has no effect if the operation mode is not B<--decompress> or B<--test>." msgstr "Цей параметр нічого не змінює, якщо режимом дій не є B<--decompress> або B<--test>." #. type: TP #: ../src/xz/xz.1:485 #, no-wrap msgid "B<--no-sparse>" msgstr "B<--no-sparse>" #. type: Plain text #: ../src/xz/xz.1:497 msgid "Disable creation of sparse files. By default, if decompressing into a regular file, B tries to make the file sparse if the decompressed data contains long sequences of binary zeros. It also works when writing to standard output as long as standard output is connected to a regular file and certain additional conditions are met to make it safe. Creating sparse files may save disk space and speed up the decompression by reducing the amount of disk I/O." msgstr "Вимкнути створення розріджених файлів. Типово, якщо видобування виконується до звичайного файла, B намагається створити розріджений файл, якщо розпаковані дані містять довгі послідовності двійкових нулів. Це також працює, коли виконується запис до стандартного виведення, доки стандартне виведення з'єднано зі звичайним файлом і виконуються певні додаткові умови, які убезпечують роботу. Створення розріджених файлів може заощадити місце на диску і пришвидшити розпаковування шляхом зменшення кількості дій введення та виведення даних на диску." #. type: TP #: ../src/xz/xz.1:497 #, no-wrap msgid "B<-S> I<.suf>, B<--suffix=>I<.suf>" msgstr "B<-S> I<.suf>, B<--suffix=>I<.suf>" #. type: Plain text #: ../src/xz/xz.1:509 msgid "When compressing, use I<.suf> as the suffix for the target file instead of B<.xz> or B<.lzma>. If not writing to standard output and the source file already has the suffix I<.suf>, a warning is displayed and the file is skipped." msgstr "При стисканні використати суфікс I<.suf> для файлів призначення, замість суфікса B<.xz> або B<.lzma>. Якщо записування виконується не до стандартного виведення і початковий файл вже має суфікс назви I<.suf>, буде показано попередження, а файл буде пропущено під час обробки." #. type: Plain text #: ../src/xz/xz.1:523 msgid "When decompressing, recognize files with the suffix I<.suf> in addition to files with the B<.xz>, B<.txz>, B<.lzma>, B<.tlz>, or B<.lz> suffix. If the source file has the suffix I<.suf>, the suffix is removed to get the target filename." msgstr "При розпаковуванні розпізнавати файли із суфіксом назви I<.suf>, окрім файлів із суфіксами назв B<.xz>, B<.txz>, B<.lzma>, B<.tlz> або B<.lz>. Якщо початковий файл мав суфікс назви I<.suf>, для отримання назви файла призначення цей суфікс буде вилучено." #. type: Plain text #: ../src/xz/xz.1:529 msgid "When compressing or decompressing raw streams (B<--format=raw>), the suffix must always be specified unless writing to standard output, because there is no default suffix for raw streams." msgstr "При стисканні або розпакуванні необроблених потоків даних (B<--format=raw>) суфікс слід вказувати завжди, якщо запис не виконується до стандартного виведення, оскільки типового суфікса назви для необроблених потоків даних не передбачено." #. type: TP #: ../src/xz/xz.1:529 #, no-wrap msgid "B<--files>[B<=>I]" msgstr "B<--files>[B<=>I<файл>]" #. type: Plain text #: ../src/xz/xz.1:543 msgid "Read the filenames to process from I; if I is omitted, filenames are read from standard input. Filenames must be terminated with the newline character. A dash (B<->) is taken as a regular filename; it doesn't mean standard input. If filenames are given also as command line arguments, they are processed before the filenames read from I." msgstr "Прочитати назви файлів для обробки з файла I<файл>; якщо I не вказано, назви файлів буде прочитано зі стандартного потоку вхідних даних. Назви файлів має бути відокремлено символом нового рядка. Символ дефіса (B<->) буде оброблено як звичайну назву файла; він не позначатиме стандартного джерела вхідних даних. Якщо також буде вказано назви файлів у аргументах рядка команди, файли з цими назвами буде оброблено до обробки файлів, назви яких було прочитано з файла I<файл>." #. type: TP #: ../src/xz/xz.1:543 #, no-wrap msgid "B<--files0>[B<=>I]" msgstr "B<--files0>[B<=>I<файл>]" #. type: Plain text #: ../src/xz/xz.1:547 msgid "This is identical to B<--files>[B<=>I] except that each filename must be terminated with the null character." msgstr "Те саме, що і B<--files>[B<=>I<файл>], але файли у списку має бути відокремлено нульовим символом." #. type: SS #: ../src/xz/xz.1:548 #, no-wrap msgid "Basic file format and compression options" msgstr "Параметри базового формату файлів та стискання" #. type: TP #: ../src/xz/xz.1:549 #, no-wrap msgid "B<-F> I, B<--format=>I" msgstr "B<-F> I, B<--format=>I<формат>" #. type: Plain text #: ../src/xz/xz.1:554 msgid "Specify the file I to compress or decompress:" msgstr "Вказати файл I<формат> для стискання або розпакування:" #. type: TP #: ../src/xz/xz.1:555 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: ../src/xz/xz.1:567 msgid "This is the default. When compressing, B is equivalent to B. When decompressing, the format of the input file is automatically detected. Note that raw streams (created with B<--format=raw>) cannot be auto-detected." msgstr "Типовий варіант. При стисканні B є еквівалентом B. При розпакуванні формат файла вхідних даних буде виявлено автоматично. Зауважте, що автоматичне виявлення необроблених потоків даних (створених за допомогою B<--format=raw>) неможливе." #. type: TP #: ../src/xz/xz.1:567 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: ../src/xz/xz.1:574 msgid "Compress to the B<.xz> file format, or accept only B<.xz> files when decompressing." msgstr "Стиснути до формату B<.xz> або приймати лише файли B<.xz> при розпаковуванні." #. type: TP #: ../src/xz/xz.1:574 #, no-wrap msgid "B, B" msgstr "B, B" #. type: Plain text #: ../src/xz/xz.1:584 msgid "Compress to the legacy B<.lzma> file format, or accept only B<.lzma> files when decompressing. The alternative name B is provided for backwards compatibility with LZMA Utils." msgstr "Стиснути дані до застарілого формату файлів B<.lzma> або приймати лише файли B<.lzma> при розпаковуванні. Альтернативну назву B може бути використано для зворотної сумісності із LZMA Utils." #. type: TP #: ../src/xz/xz.1:584 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: ../src/xz/xz.1:590 msgid "Accept only B<.lz> files when decompressing. Compression is not supported." msgstr "Приймати лише файли B<.lz> при розпакуванні. Підтримки стискання не передбачено." #. type: Plain text #: ../src/xz/xz.1:603 msgid "The B<.lz> format version 0 and the unextended version 1 are supported. Version 0 files were produced by B 1.3 and older. Such files aren't common but may be found from file archives as a few source packages were released in this format. People might have old personal files in this format too. Decompression support for the format version 0 was removed in B 1.18." msgstr "Передбачено підтримку версії формату B<.lz> 0 та нерозширеної версії 1. Файли версії 0 було створено B 1.3 та старішими версіями. Такі файли не є поширеними, але їх можна знайти у файлових архівах, оскільки певну незначну кількість пакунків із початковим кодом було випущено у цьому форматі. Також можуть існувати особисті файли у цьому форматі. Підтримку розпаковування для формату версії 0 було вилучено у B 1.18." #. type: Plain text #: ../src/xz/xz.1:612 msgid "B 1.4 and later create files in the format version 1. The sync flush marker extension to the format version 1 was added in B 1.6. This extension is rarely used and isn't supported by B (diagnosed as corrupt input)." msgstr "B 1.4 і пізніші версії створюють файли у форматі версії 1. Розширення синхронізації позначки витирання до формату версії 1 було додано у B 1.6. Це розширення використовують не часто, його підтримки у B не передбачено (програма повідомлятиме про пошкоджені вхідні дані)." #. type: TP #: ../src/xz/xz.1:612 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: ../src/xz/xz.1:620 msgid "Compress or uncompress a raw stream (no headers). This is meant for advanced users only. To decode raw streams, you need use B<--format=raw> and explicitly specify the filter chain, which normally would have been stored in the container headers." msgstr "Стиснути або розпакувати потік необроблених даних (лез заголовків). Цей параметр призначено лише для досвідчених користувачів. Для розпаковування необроблених потоків даних слід користуватися параметром B<--format=raw> і явно вказати ланцюжок фільтрування, який за звичайних умов мало б бути збережено у заголовках контейнера." #. type: TP #: ../src/xz/xz.1:621 #, no-wrap msgid "B<-C> I, B<--check=>I" msgstr "B<-C> I<перевірка>, B<--check=>I<перевірка>" #. type: Plain text #: ../src/xz/xz.1:636 msgid "Specify the type of the integrity check. The check is calculated from the uncompressed data and stored in the B<.xz> file. This option has an effect only when compressing into the B<.xz> format; the B<.lzma> format doesn't support integrity checks. The integrity check (if any) is verified when the B<.xz> file is decompressed." msgstr "Вказати тип перевірки цілісності. Контрольну суму буде обчислено на основі нестиснених даних і збережено у файлі B<.xz>. Цей параметр працюватиме, лише якщо дані стиснено до файла у форматі B<.xz>; для формату файлів B<.lzma> підтримки перевірки цілісності не передбачено. Перевірку контрольної суми (якщо така є) буде виконано під час розпаковування файла B<.xz>." #. type: Plain text #: ../src/xz/xz.1:640 msgid "Supported I types:" msgstr "Підтримувані типи I<перевірок>:" #. type: TP #: ../src/xz/xz.1:641 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: ../src/xz/xz.1:647 msgid "Don't calculate an integrity check at all. This is usually a bad idea. This can be useful when integrity of the data is verified by other means anyway." msgstr "Не обчислювати контрольну суму взагалі. Зазвичай, не варто цього робити. Цим варіантом слід скористатися, якщо цілісність даних буде перевірено в інший спосіб." #. type: TP #: ../src/xz/xz.1:647 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: ../src/xz/xz.1:650 msgid "Calculate CRC32 using the polynomial from IEEE-802.3 (Ethernet)." msgstr "Обчислити CRC32 за допомогою полінома з IEEE-802.3 (Ethernet)." #. type: TP #: ../src/xz/xz.1:650 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: ../src/xz/xz.1:655 msgid "Calculate CRC64 using the polynomial from ECMA-182. This is the default, since it is slightly better than CRC32 at detecting damaged files and the speed difference is negligible." msgstr "Обчислити CRC64 за допомогою полінома з ECMA-182. Це типовий варіант, оскільки він дещо кращий за CRC32 при виявленні пошкоджених файлів, а різниця у швидкості є незрачною." #. type: TP #: ../src/xz/xz.1:655 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: ../src/xz/xz.1:659 msgid "Calculate SHA-256. This is somewhat slower than CRC32 and CRC64." msgstr "Обчислити SHA-256. Цей варіант дещо повільніший за CRC32 і CRC64." #. type: Plain text #: ../src/xz/xz.1:665 msgid "Integrity of the B<.xz> headers is always verified with CRC32. It is not possible to change or disable it." msgstr "Цілісність заголовків B<.xz> завжди перевіряють за допомогою CRC32. Таку перевірку не можна змінити або скасувати." #. type: TP #: ../src/xz/xz.1:665 #, no-wrap msgid "B<--ignore-check>" msgstr "B<--ignore-check>" #. type: Plain text #: ../src/xz/xz.1:671 msgid "Don't verify the integrity check of the compressed data when decompressing. The CRC32 values in the B<.xz> headers will still be verified normally." msgstr "Не перевіряти цілісність стиснених даних при розпаковуванні. Значення CRC32 у заголовках B<.xz> буде у звичайний спосіб перевірено попри цей параметр." #. type: Plain text #: ../src/xz/xz.1:674 msgid "B Possible reasons to use this option:" msgstr "B<Не користуйтеся цим параметром, якщо ви не усвідомлюєте наслідків ваших дій.> Можливі причини скористатися цим параметром:" #. type: Plain text #: ../src/xz/xz.1:677 msgid "Trying to recover data from a corrupt .xz file." msgstr "Спроба отримання даних з пошкодженого файла .xz." #. type: Plain text #: ../src/xz/xz.1:683 msgid "Speeding up decompression. This matters mostly with SHA-256 or with files that have compressed extremely well. It's recommended to not use this option for this purpose unless the file integrity is verified externally in some other way." msgstr "Пришвидшення розпакування. Це, здебільшого, стосується SHA-256 або файлів із надзвичайно високим рівнем пакування. Не рекомендуємо користуватися цим параметром з цією метою, якщо цілісність файлів не буде перевірено у якийсь інший спосіб." #. type: TP #: ../src/xz/xz.1:684 #, no-wrap msgid "B<-0> ... B<-9>" msgstr "B<-0> ... B<-9>" #. type: Plain text #: ../src/xz/xz.1:693 msgid "Select a compression preset level. The default is B<-6>. If multiple preset levels are specified, the last one takes effect. If a custom filter chain was already specified, setting a compression preset level clears the custom filter chain." msgstr "Вибрати рівень стискання. Типовим є B<-6>. Якщо буде вказано декілька рівнів стискання, програма використає останній вказаний. Якщо вже було вказано нетиповий ланцюжок фільтрів, встановлення рівня стискання призведе до нехтування цим нетиповим ланцюжком фільтрів." #. type: Plain text #: ../src/xz/xz.1:708 msgid "The differences between the presets are more significant than with B(1) and B(1). The selected compression settings determine the memory requirements of the decompressor, thus using a too high preset level might make it painful to decompress the file on an old system with little RAM. Specifically, B like it often is with B(1) and B(1)." msgstr "Різниця між рівнями є суттєвішою, ніж у B(1) і B(1). Вибрані параметри стискання визначають вимоги до пам'яті під час розпаковування, отже використання надто високого рівня стискання може призвести до проблем під час розпаковування файла на застарілих комп'ютерах із невеликим обсягом оперативної пам'яті. Зокрема, B<не варто використовувати -9 для усього>, як це часто буває для B(1) і B(1)." #. type: TP #: ../src/xz/xz.1:709 #, no-wrap msgid "B<-0> ... B<-3>" msgstr "B<-0> ... B<-3>" #. type: Plain text #: ../src/xz/xz.1:721 msgid "These are somewhat fast presets. B<-0> is sometimes faster than B while compressing much better. The higher ones often have speed comparable to B(1) with comparable or better compression ratio, although the results depend a lot on the type of data being compressed." msgstr "Це дещо швидші набори налаштувань. B<-0> іноді є швидшим за B, забезпечуючи набагато більший коефіцієнт стискання. Вищі рівні часто мають швидкість, яку можна порівняти з B(1) із подібним або кращим коефіцієнтом стискання, хоча результати значно залежать від типу даних, які стискають." #. type: TP #: ../src/xz/xz.1:721 #, no-wrap msgid "B<-4> ... B<-6>" msgstr "B<-4> ... B<-6>" #. type: Plain text #: ../src/xz/xz.1:735 msgid "Good to very good compression while keeping decompressor memory usage reasonable even for old systems. B<-6> is the default, which is usually a good choice for distributing files that need to be decompressible even on systems with only 16\\ MiB RAM. (B<-5e> or B<-6e> may be worth considering too. See B<--extreme>.)" msgstr "Стискання від доброго до дуже доброго рівня із одночасним підтриманням помірного рівня споживання пам'яті засобом розпаковування, навіть для застарілих системи. Типовим є значення B<-6>, яке є добрим варіантом для поширення файлів, які мають бути придатними до розпаковування навіть у системах із лише 16\\ МіБ оперативної пам'яті. (Також можна розглянути варіанти B<-5e> і B<-6e>. Див. B<--extreme>.)" #. type: TP #: ../src/xz/xz.1:735 #, no-wrap msgid "B<-7 ... -9>" msgstr "B<-7 ... -9>" #. type: Plain text #: ../src/xz/xz.1:742 msgid "These are like B<-6> but with higher compressor and decompressor memory requirements. These are useful only when compressing files bigger than 8\\ MiB, 16\\ MiB, and 32\\ MiB, respectively." msgstr "Ці варіанти подібні до B<-6>, але із вищими вимогами щодо пам'яті для стискання і розпаковування. Можуть бути корисними лише для стискання файлів з розміром, що перевищує 8\\ МіБ, 16\\ МіБ та 32\\ МіБ, відповідно." #. type: Plain text #: ../src/xz/xz.1:750 msgid "On the same hardware, the decompression speed is approximately a constant number of bytes of compressed data per second. In other words, the better the compression, the faster the decompression will usually be. This also means that the amount of uncompressed output produced per second can vary a lot." msgstr "На однаковому обладнанні швидкість розпакування є приблизно сталою кількістю байтів стиснених даних за секунду. Іншими словами, чим кращим є стискання, тим швидшим буде, зазвичай, розпаковування. Це також означає, що об'єм розпакованих виведених даних, які видає програма за секунду, може коливатися у широкому діапазоні." #. type: Plain text #: ../src/xz/xz.1:752 msgid "The following table summarises the features of the presets:" msgstr "У наведеній нижче таблиці підсумовано можливості шаблонів:" #. type: tbl table #: ../src/xz/xz.1:759 ../src/xz/xz.1:847 ../src/xz/xz.1:3000 #, no-wrap msgid "Preset" msgstr "Шаблон" #. type: tbl table #: ../src/xz/xz.1:759 ../src/xz/xz.1:847 #, no-wrap msgid "DictSize" msgstr "DictSize" #. type: tbl table #: ../src/xz/xz.1:759 ../src/xz/xz.1:847 ../src/xz/xz.1:3000 #, no-wrap msgid "CompCPU" msgstr "CompCPU" #. type: tbl table #: ../src/xz/xz.1:759 ../src/xz/xz.1:847 #, no-wrap msgid "CompMem" msgstr "CompMem" #. type: tbl table #: ../src/xz/xz.1:759 ../src/xz/xz.1:847 #, no-wrap msgid "DecMem" msgstr "DecMem" #. type: tbl table #: ../src/xz/xz.1:760 ../src/xz/xz.1:2611 ../src/xz/xz.1:2636 #: ../src/xz/xz.1:3001 #, no-wrap msgid "-0" msgstr "-0" #. type: tbl table #: ../src/xz/xz.1:760 ../src/xz/xz.1:848 ../src/xz/xz.1:2611 #, no-wrap msgid "256 KiB" msgstr "256 КіБ" #. type: TP #: ../src/xz/xz.1:760 ../src/xz/xz.1:3001 ../src/scripts/xzgrep.1:111 #, no-wrap msgid "0" msgstr "0" #. type: tbl table #: ../src/xz/xz.1:760 ../src/xz/xz.1:762 ../src/xz/xz.1:850 ../src/xz/xz.1:2636 #, no-wrap msgid "3 MiB" msgstr "3 МіБ" #. type: tbl table #: ../src/xz/xz.1:760 ../src/xz/xz.1:761 ../src/xz/xz.1:848 ../src/xz/xz.1:849 #: ../src/xz/xz.1:2612 ../src/xz/xz.1:2613 ../src/xz/xz.1:2615 #, no-wrap msgid "1 MiB" msgstr "1 МіБ" #. type: tbl table #: ../src/xz/xz.1:761 ../src/xz/xz.1:2612 ../src/xz/xz.1:2637 #: ../src/xz/xz.1:3002 #, no-wrap msgid "-1" msgstr "-1" #. type: TP #: ../src/xz/xz.1:761 ../src/xz/xz.1:1866 ../src/xz/xz.1:3002 #: ../src/scripts/xzgrep.1:115 #, no-wrap msgid "1" msgstr "1" #. type: tbl table #: ../src/xz/xz.1:761 ../src/xz/xz.1:765 ../src/xz/xz.1:766 ../src/xz/xz.1:853 #: ../src/xz/xz.1:854 ../src/xz/xz.1:2637 #, no-wrap msgid "9 MiB" msgstr "9 МіБ" #. type: tbl table #: ../src/xz/xz.1:761 ../src/xz/xz.1:762 ../src/xz/xz.1:849 ../src/xz/xz.1:850 #: ../src/xz/xz.1:2613 ../src/xz/xz.1:2616 ../src/xz/xz.1:2637 #, no-wrap msgid "2 MiB" msgstr "2 МіБ" #. type: tbl table #: ../src/xz/xz.1:762 ../src/xz/xz.1:2613 ../src/xz/xz.1:2638 #: ../src/xz/xz.1:3003 #, no-wrap msgid "-2" msgstr "-2" #. type: tbl table #: ../src/xz/xz.1:762 ../src/xz/xz.1:1868 ../src/xz/xz.1:1873 #: ../src/xz/xz.1:3003 #, no-wrap msgid "2" msgstr "2" #. type: tbl table #: ../src/xz/xz.1:762 ../src/xz/xz.1:767 ../src/xz/xz.1:855 ../src/xz/xz.1:2638 #, no-wrap msgid "17 MiB" msgstr "17 МіБ" #. type: tbl table #: ../src/xz/xz.1:763 ../src/xz/xz.1:2614 ../src/xz/xz.1:2639 #: ../src/xz/xz.1:3004 #, no-wrap msgid "-3" msgstr "-3" #. type: tbl table #: ../src/xz/xz.1:763 ../src/xz/xz.1:764 ../src/xz/xz.1:848 ../src/xz/xz.1:851 #: ../src/xz/xz.1:852 ../src/xz/xz.1:2614 ../src/xz/xz.1:2615 #: ../src/xz/xz.1:2617 #, no-wrap msgid "4 MiB" msgstr "4 МіБ" #. type: tbl table #: ../src/xz/xz.1:763 ../src/xz/xz.1:3004 #, no-wrap msgid "3" msgstr "3" #. type: tbl table #: ../src/xz/xz.1:763 ../src/xz/xz.1:768 ../src/xz/xz.1:856 ../src/xz/xz.1:2619 #: ../src/xz/xz.1:2620 ../src/xz/xz.1:2639 #, no-wrap msgid "32 MiB" msgstr "32 МіБ" #. type: tbl table #: ../src/xz/xz.1:763 ../src/xz/xz.1:764 ../src/xz/xz.1:851 ../src/xz/xz.1:852 #, no-wrap msgid "5 MiB" msgstr "5 МіБ" #. type: tbl table #: ../src/xz/xz.1:764 ../src/xz/xz.1:2615 ../src/xz/xz.1:2640 #: ../src/xz/xz.1:3005 #, no-wrap msgid "-4" msgstr "-4" #. type: tbl table #: ../src/xz/xz.1:764 ../src/xz/xz.1:1867 ../src/xz/xz.1:1869 #: ../src/xz/xz.1:1870 ../src/xz/xz.1:1872 ../src/xz/xz.1:3005 #, no-wrap msgid "4" msgstr "4" #. type: tbl table #: ../src/xz/xz.1:764 ../src/xz/xz.1:851 ../src/xz/xz.1:852 ../src/xz/xz.1:2640 #, no-wrap msgid "48 MiB" msgstr "48 МіБ" #. type: tbl table #: ../src/xz/xz.1:765 ../src/xz/xz.1:2616 ../src/xz/xz.1:2641 #: ../src/xz/xz.1:3006 #, no-wrap msgid "-5" msgstr "-5" #. type: tbl table #: ../src/xz/xz.1:765 ../src/xz/xz.1:766 ../src/xz/xz.1:853 ../src/xz/xz.1:854 #: ../src/xz/xz.1:2616 ../src/xz/xz.1:2617 ../src/xz/xz.1:2618 #, no-wrap msgid "8 MiB" msgstr "8 МіБ" #. type: tbl table #: ../src/xz/xz.1:765 ../src/xz/xz.1:3006 #, no-wrap msgid "5" msgstr "5" #. type: tbl table #: ../src/xz/xz.1:765 ../src/xz/xz.1:766 ../src/xz/xz.1:853 ../src/xz/xz.1:854 #: ../src/xz/xz.1:2641 ../src/xz/xz.1:2642 #, no-wrap msgid "94 MiB" msgstr "94 МіБ" #. type: tbl table #: ../src/xz/xz.1:766 ../src/xz/xz.1:2617 ../src/xz/xz.1:2642 #: ../src/xz/xz.1:3007 #, no-wrap msgid "-6" msgstr "-6" #. type: tbl table #: ../src/xz/xz.1:766 ../src/xz/xz.1:767 ../src/xz/xz.1:768 ../src/xz/xz.1:769 #: ../src/xz/xz.1:3007 #, no-wrap msgid "6" msgstr "6" #. type: tbl table #: ../src/xz/xz.1:767 ../src/xz/xz.1:2618 ../src/xz/xz.1:2643 #, no-wrap msgid "-7" msgstr "-7" #. type: tbl table #: ../src/xz/xz.1:767 ../src/xz/xz.1:855 ../src/xz/xz.1:2618 #: ../src/xz/xz.1:2619 ../src/xz/xz.1:2640 #, no-wrap msgid "16 MiB" msgstr "16 МіБ" #. type: tbl table #: ../src/xz/xz.1:767 ../src/xz/xz.1:855 ../src/xz/xz.1:2643 #, no-wrap msgid "186 MiB" msgstr "186 МіБ" #. type: tbl table #: ../src/xz/xz.1:768 ../src/xz/xz.1:2619 ../src/xz/xz.1:2644 #, no-wrap msgid "-8" msgstr "-8" #. type: tbl table #: ../src/xz/xz.1:768 ../src/xz/xz.1:856 ../src/xz/xz.1:2644 #, no-wrap msgid "370 MiB" msgstr "370 МіБ" #. type: tbl table #: ../src/xz/xz.1:768 ../src/xz/xz.1:856 #, no-wrap msgid "33 MiB" msgstr "33 МіБ" #. type: tbl table #: ../src/xz/xz.1:769 ../src/xz/xz.1:2620 ../src/xz/xz.1:2645 #, no-wrap msgid "-9" msgstr "-9" #. type: tbl table #: ../src/xz/xz.1:769 ../src/xz/xz.1:857 ../src/xz/xz.1:2620 #, no-wrap msgid "64 MiB" msgstr "64 МіБ" #. type: tbl table #: ../src/xz/xz.1:769 ../src/xz/xz.1:857 ../src/xz/xz.1:2645 #, no-wrap msgid "674 MiB" msgstr "674 МіБ" #. type: tbl table #: ../src/xz/xz.1:769 ../src/xz/xz.1:857 #, no-wrap msgid "65 MiB" msgstr "65 МіБ" #. type: Plain text #: ../src/xz/xz.1:775 msgid "Column descriptions:" msgstr "Описи стовпчиків:" #. type: Plain text #: ../src/xz/xz.1:787 msgid "DictSize is the LZMA2 dictionary size. It is waste of memory to use a dictionary bigger than the size of the uncompressed file. This is why it is good to avoid using the presets B<-7> ... B<-9> when there's no real need for them. At B<-6> and lower, the amount of memory wasted is usually low enough to not matter." msgstr "DictSize є розміром словника LZMA2. Використання словника, розмір якого перевищує розмір нестисненого файла, — проста витрата пам'яті. Ось чому не варто використовувати шаблони B<-7> ... B<-9>, якщо у них немає реальної потреби. Для B<-6> та нижчих рівнів об'єм витраченої пам'яті, зазвичай, такий низький, що цей фактор ні на що не впливає." #. type: Plain text #: ../src/xz/xz.1:796 msgid "CompCPU is a simplified representation of the LZMA2 settings that affect compression speed. The dictionary size affects speed too, so while CompCPU is the same for levels B<-6> ... B<-9>, higher levels still tend to be a little slower. To get even slower and thus possibly better compression, see B<--extreme>." msgstr "CompCPU є спрощеним представленням параметрів LZMA2, які впливають на швидкість стискання. Розмір словника також впливає на швидкість, тому, хоча значення CompCPU є однаковим для рівнів B<-6> ... B<-9>, обробка на вищих рівнях все одно є трошки повільнішою. Що отримати повільніше і, ймовірно, краще стискання, див. B<--extreme>." #. type: Plain text #: ../src/xz/xz.1:802 msgid "CompMem contains the compressor memory requirements in the single-threaded mode. It may vary slightly between B versions." msgstr "CompMem містить вимоги до пам'яті засобу стискання у однопотоковому режимі. Значення можуть бути дещо різними для різних версій B." #. type: Plain text #: ../src/xz/xz.1:809 msgid "DecMem contains the decompressor memory requirements. That is, the compression settings determine the memory requirements of the decompressor. The exact decompressor memory usage is slightly more than the LZMA2 dictionary size, but the values in the table have been rounded up to the next full MiB." msgstr "У DecMem містяться вимоги до пам'яті при розпаковуванні. Тобто параметри засобу стискання визначають вимоги до пам'яті при розпаковуванні. Точний об'єм пам'яті, яка потрібна для розпаковування, дещо перевищує розмір словника LZMA2, але значення у таблиці було округлено до наступного цілого значення МіБ." #. type: Plain text #: ../src/xz/xz.1:819 msgid "Memory requirements of the multi-threaded mode are significantly higher than that of the single-threaded mode. With the default value of B<--block-size>, each thread needs 3*3*DictSize plus CompMem or DecMem. For example, four threads with preset B<-6> needs 660\\(en670\\ MiB of memory." msgstr "Вимоги до пам'яті у багатопотоковому режимі є значно вищими, ніж у однопотоковому. З типовим значенням B<--block-size> для кожного потоку треба 3*3*DictSize плюс CompMem або DecMem. Наприклад, для чотирьох потоків з шаблоном B<-6> потрібно 660\\(en670\\ МіБ пам'яті." #. type: TP #: ../src/xz/xz.1:819 #, no-wrap msgid "B<-e>, B<--extreme>" msgstr "B<-e>, B<--extreme>" #. type: Plain text #: ../src/xz/xz.1:828 msgid "Use a slower variant of the selected compression preset level (B<-0> ... B<-9>) to hopefully get a little bit better compression ratio, but with bad luck this can also make it worse. Decompressor memory usage is not affected, but compressor memory usage increases a little at preset levels B<-0> ... B<-3>." msgstr "Використати повільніший варіант вибраного рівня стискання (B<-0> ... B<-9>) у сподіванні отримати трохи кращий коефіцієнт стискання, але, якщо не поталанить, можна його і погіршити. Не впливає на використання пам'яті при розпаковуванні, але використання пам'яті при стисканні дещо збільшиться на рівнях B<-0> ... B<-3>." #. type: Plain text #: ../src/xz/xz.1:840 msgid "Since there are two presets with dictionary sizes 4\\ MiB and 8\\ MiB, the presets B<-3e> and B<-5e> use slightly faster settings (lower CompCPU) than B<-4e> and B<-6e>, respectively. That way no two presets are identical." msgstr "Оскільки існує два набори налаштувань із розмірами словників 4\\ МіБ та 8\\ МіБ, у наборах B<-3e> і B<-5e> використано трошки швидші параметри (нижче CompCPU), ніж у наборах B<-4e> і B<-6e>, відповідно. Тому двох однакових наборів у списку немає." #. type: tbl table #: ../src/xz/xz.1:848 #, no-wrap msgid "-0e" msgstr "-0e" #. type: tbl table #: ../src/xz/xz.1:848 ../src/xz/xz.1:849 ../src/xz/xz.1:850 ../src/xz/xz.1:852 #: ../src/xz/xz.1:854 ../src/xz/xz.1:855 ../src/xz/xz.1:856 ../src/xz/xz.1:857 #: ../src/xz/xz.1:3009 #, no-wrap msgid "8" msgstr "8" #. type: tbl table #: ../src/xz/xz.1:849 #, no-wrap msgid "-1e" msgstr "-1e" #. type: tbl table #: ../src/xz/xz.1:849 #, no-wrap msgid "13 MiB" msgstr "13 МіБ" #. type: tbl table #: ../src/xz/xz.1:850 #, no-wrap msgid "-2e" msgstr "-2e" #. type: tbl table #: ../src/xz/xz.1:850 #, no-wrap msgid "25 MiB" msgstr "25 МіБ" #. type: tbl table #: ../src/xz/xz.1:851 #, no-wrap msgid "-3e" msgstr "-3e" #. type: tbl table #: ../src/xz/xz.1:851 ../src/xz/xz.1:853 ../src/xz/xz.1:3008 #, no-wrap msgid "7" msgstr "7" #. type: tbl table #: ../src/xz/xz.1:852 #, no-wrap msgid "-4e" msgstr "-4e" #. type: tbl table #: ../src/xz/xz.1:853 ../src/xz/xz.1:3008 #, no-wrap msgid "-5e" msgstr "-5e" #. type: tbl table #: ../src/xz/xz.1:854 ../src/xz/xz.1:3009 #, no-wrap msgid "-6e" msgstr "-6e" #. type: tbl table #: ../src/xz/xz.1:855 #, no-wrap msgid "-7e" msgstr "-7e" #. type: tbl table #: ../src/xz/xz.1:856 #, no-wrap msgid "-8e" msgstr "-8e" #. type: tbl table #: ../src/xz/xz.1:857 #, no-wrap msgid "-9e" msgstr "-9e" #. type: Plain text #: ../src/xz/xz.1:869 msgid "For example, there are a total of four presets that use 8\\ MiB dictionary, whose order from the fastest to the slowest is B<-5>, B<-6>, B<-5e>, and B<-6e>." msgstr "Наприклад, передбачено загалом чотири набори налаштувань із використанням словника у 8\\ МіБ, порядок яких від найшвидшого до найповільнішого є таким: B<-5>, B<-6>, B<-5e> і B<-6e>." #. type: TP #: ../src/xz/xz.1:869 #, no-wrap msgid "B<--fast>" msgstr "B<--fast>" #. type: TP #: ../src/xz/xz.1:872 #, no-wrap msgid "B<--best>" msgstr "B<--best>" #. type: Plain text #: ../src/xz/xz.1:883 msgid "These are somewhat misleading aliases for B<-0> and B<-9>, respectively. These are provided only for backwards compatibility with LZMA Utils. Avoid using these options." msgstr "Це дещо оманливі альтернативні варіанти для B<-0> і B<-9>, відповідно. Реалізовано лише для забезпечення зворотної сумісності із LZMA Utils. Намагайтеся не користуватися цими варіантами параметрів." #. type: TP #: ../src/xz/xz.1:883 #, no-wrap msgid "B<--block-size=>I" msgstr "B<--block-size=>I<розмір>" #. type: Plain text #: ../src/xz/xz.1:896 msgid "When compressing to the B<.xz> format, split the input data into blocks of I bytes. The blocks are compressed independently from each other, which helps with multi-threading and makes limited random-access decompression possible. This option is typically used to override the default block size in multi-threaded mode, but this option can be used in single-threaded mode too." msgstr "При стисканні до формату B<.xz> поділити вхідні дані на блоки у I<розмір> байтів. Ці блоки буде стиснуто незалежно один від одного, що допоможе у багатопотоковій обробці і зробить можливим обмежене розпакування для доступу до будь-яких даних. Цим параметром слід типово користуватися для перевизначення типового розміру блоку у багатопотоковому режимі обробки, але цим параметром можна також скористатися в однопотоковому режимі обробки." #. type: Plain text #: ../src/xz/xz.1:913 msgid "In multi-threaded mode about three times I bytes will be allocated in each thread for buffering input and output. The default I is three times the LZMA2 dictionary size or 1 MiB, whichever is more. Typically a good value is 2\\(en4 times the size of the LZMA2 dictionary or at least 1 MiB. Using I less than the LZMA2 dictionary size is waste of RAM because then the LZMA2 dictionary buffer will never get fully used. In multi-threaded mode, the sizes of the blocks are stored in the block headers. This size information is required for multi-threaded decompression." msgstr "У багатопотоковому режимі для кожного потоку буде отримано для буферів вхідних і вихідних даних майже утричі більше за I<розмір> байтів. Типовий I<розмір> утричі більший за розмір словника LZMA2 або дорівнює 1 МіБ, буде вибрано більше значення. Типовим добрим значенням буде значення, яке у 2\\(en4 рази перевищує розмір словника LZMA2 або дорівнює принаймні 1 МіБ. Використання значення I<розмір>, яке є меншим за розмір словника LZMA2, має наслідком марну витрату оперативної пам'яті, оскільки його використання призводить до того, що буфер словника LZMA2 ніколи не буде використано повністю. У багатопотоковому режимі розміри блоків зберігатимуться у заголовках блоків. Ці дані потрібні для багатопотокового розпаковування." #. type: Plain text #: ../src/xz/xz.1:922 msgid "In single-threaded mode no block splitting is done by default. Setting this option doesn't affect memory usage. No size information is stored in block headers, thus files created in single-threaded mode won't be identical to files created in multi-threaded mode. The lack of size information also means that B won't be able decompress the files in multi-threaded mode." msgstr "У однопотоковому режимі поділ на блоки типово не виконуватиметься. Встановлення значення для цього параметра не впливатиме на використання пам'яті. У заголовках блоків не зберігатимуться дані щодо розміру, отже файли, які створено в однопотоковому режимі не будуть ідентичними до файлів, які створено у багатопотоковому режимі. Те, що у заголовках блоків не зберігатимуться дані щодо розміру також означає, що B не зможе розпаковувати такі файли у багатопотоковому режимі." #. type: TP #: ../src/xz/xz.1:922 #, no-wrap msgid "B<--block-list=>I" msgstr "B<--block-list=>I<записи>" #. type: Plain text #: ../src/xz/xz.1:928 msgid "When compressing to the B<.xz> format, start a new block with an optional custom filter chain after the given intervals of uncompressed data." msgstr "При стисканні у форматі B<.xz> починати новий блок із необов'язковим ланцюжком фільтрів після вказаної кількості інтервалів нестиснених даних." #. type: Plain text #: ../src/xz/xz.1:938 msgid "The I are a comma-separated list. Each item consists of an optional filter chain number between 0 and 9 followed by a colon (B<:>) and a required size of uncompressed data. Omitting an item (two or more consecutive commas) is a shorthand to use the size and filters of the previous item." msgstr "I<записи> є списком відокремлених комами значень. Кожен запис складається з необов'язкового номера ланцюжка фільтрів від 0 до 9, після якого йде двокрапка (B<:>) і необхідний розмір нестиснутих даних. Пропущення запису (дві або більше послідовних ком) є скороченим варіантом визначення використання розміру та фільтрів попереднього запису." #. type: Plain text #: ../src/xz/xz.1:947 msgid "If the input file is bigger than the sum of the sizes in I, the last item is repeated until the end of the file. A special value of B<0> may be used as the last size to indicate that the rest of the file should be encoded as a single block." msgstr "Якщо файл вхідних даних є більшим за розміром за суму розмірів I<записів>, останнє значення у I<розмірах> буде повторено до кінця файла. Особливе значення B<0> може бути використано як останній розмір, щоб позначити, що решту файла має бути закодовано як єдиний блок." #. type: Plain text #: ../src/xz/xz.1:964 msgid "An alternative filter chain for each block can be specified in combination with the B<--filters1=>I \\&...\\& B<--filters9=>I options. These options define filter chains with an identifier between 1\\(en9. Filter chain 0 can be used to refer to the default filter chain, which is the same as not specifying a filter chain. The filter chain identifier can be used before the uncompressed size, followed by a colon (B<:>). For example, if one specifies B<--block-list=1:2MiB,3:2MiB,2:4MiB,,2MiB,0:4MiB> then blocks will be created using:" msgstr "Альтернативний ланцюжок фільтрів для кожного блоку можна вказати в поєднанні з параметрами B<--filters1=>I<фільтри> \\&...\\& B<--filters9=>I<фільтри>. Ці параметри визначають ланцюжки фільтрів з ідентифікатором у діапазоні 1\\(en9. Ланцюжок фільтрів 0 можна використовувати для посилання на типовий ланцюжок фільтрів — це те саме, що не вказувати ланцюжок фільтрів. Ідентифікатор ланцюжка фільтрів можна використовувати перед нестисненим розміром, після якого йде двокрапка (B<:>). Наприклад, якщо вказати B<--block-list=1:2MiB,3:2MiB,2:4MiB,,2MiB,0:4MiB>, блоки будуть створені так:" #. type: Plain text #: ../src/xz/xz.1:969 msgid "The filter chain specified by B<--filters1> and 2 MiB input" msgstr "Ланцюжок фільтрів задано B<--filters1> із вхідними даними у 2 МіБ" #. type: Plain text #: ../src/xz/xz.1:973 msgid "The filter chain specified by B<--filters3> and 2 MiB input" msgstr "Ланцюжок фільтрів задано B<--filters3> із вхідними даними у 2 МіБ" #. type: Plain text #: ../src/xz/xz.1:977 ../src/xz/xz.1:981 msgid "The filter chain specified by B<--filters2> and 4 MiB input" msgstr "Ланцюжок фільтрів задано B<--filters2> із вхідними даними у 4 МіБ" #. type: Plain text #: ../src/xz/xz.1:983 msgid "The default filter chain and 2 MiB input" msgstr "Типовий ланцюжок даних і вхідні дані у 2 МіБ" #. type: Plain text #: ../src/xz/xz.1:986 msgid "The default filter chain and 4 MiB input for every block until end of input." msgstr "Типовий ланцюжок фільтрів та вхідні дані у 4 МіБ для кожного блоку до кінця вхідних даних." #. type: Plain text #: ../src/xz/xz.1:1000 msgid "If one specifies a size that exceeds the encoder's block size (either the default value in threaded mode or the value specified with B<--block-size=>I), the encoder will create additional blocks while keeping the boundaries specified in I. For example, if one specifies B<--block-size=10MiB> B<--block-list=5MiB,10MiB,8MiB,12MiB,24MiB> and the input file is 80 MiB, one will get 11 blocks: 5, 10, 8, 10, 2, 10, 10, 4, 10, 10, and 1 MiB." msgstr "Якщо вказати розмір, який перевищує розмір блоку кодувальника (або типове значення у режимі із потоками обробки, або значення, яке встановлено за допомогою B<--block-size=>I<розмір>), засіб кодування створить додаткові блоки, зберігаючи межі, які вказано у I<записах>. Наприклад, якщо вказати B<--block-size=10MiB> B<--block-list=5MiB,10MiB,8MiB,12MiB,24MiB>, а файл вхідних даних має розмір 80 МіБ, буде отримано такі 11 блоків: 5, 10, 8, 10, 2, 10, 10, 4, 10, 10 і 1 МіБ." #. type: Plain text #: ../src/xz/xz.1:1006 msgid "In multi-threaded mode the sizes of the blocks are stored in the block headers. This isn't done in single-threaded mode, so the encoded output won't be identical to that of the multi-threaded mode." msgstr "У багатопотоковому режимі розмір блоків буде збережено у заголовках блоків. Програма не зберігатиме ці дані у однопотоковому режимі, отже закодований результат не буде ідентичним до отриманого у багатопотоковому режимі." #. type: TP #: ../src/xz/xz.1:1006 #, no-wrap msgid "B<--flush-timeout=>I" msgstr "B<--flush-timeout=>I<час_очікування>" #. type: Plain text #: ../src/xz/xz.1:1023 msgid "When compressing, if more than I milliseconds (a positive integer) has passed since the previous flush and reading more input would block, all the pending input data is flushed from the encoder and made available in the output stream. This can be useful if B is used to compress data that is streamed over a network. Small I values make the data available at the receiving end with a small delay, but large I values give better compression ratio." msgstr "При стискання, якщо з моменту попереднього витирання мине понад I<час_очікування> мілісекунд (додатне ціле значення) і читання додаткових даних буде заблоковано, усі вхідні дані у черзі обробки буде витерто з кодувальника і зроблено доступним у потоці вихідних даних. Це може бути корисним, якщо B використовують для стискання даних, які передають потоком мережею. Невеликі значення аргументу I<час_очікування> зроблять дані доступними на боці отримання із малою затримкою, а великі значення аргумент I<час_очікування> уможливлять кращий коефіцієнт стискання." #. type: Plain text #: ../src/xz/xz.1:1031 msgid "This feature is disabled by default. If this option is specified more than once, the last one takes effect. The special I value of B<0> can be used to explicitly disable this feature." msgstr "Типово, цю можливість вимкнено. Якщо цей параметр вказано декілька разів, буде використано лише останнє вказане значення. Особливим значенням аргументу I<час_очікування>, рівним B<0>, можна скористатися для вимикання цієї можливості явним чином." #. type: Plain text #: ../src/xz/xz.1:1033 msgid "This feature is not available on non-POSIX systems." msgstr "Ця можливість недоступна у системах, які не є системами POSIX." #. FIXME #. type: Plain text #: ../src/xz/xz.1:1041 msgid "B Currently B is unsuitable for decompressing the stream in real time due to how B does buffering." msgstr "B<Ця можливість усе ще є експериментальною.> У поточній версії, B не може розпаковувати потік даних у режимі реального часу через те, у який спосіб B виконує буферизацію." #. type: TP #: ../src/xz/xz.1:1041 #, no-wrap msgid "B<--memlimit-compress=>I" msgstr "B<--memlimit-compress=>I<обмеження>" #. type: Plain text #: ../src/xz/xz.1:1046 msgid "Set a memory usage limit for compression. If this option is specified multiple times, the last one takes effect." msgstr "Встановити обмеження на використання пам'яті при стисканні. Якщо цей параметр вказано декілька разів, враховано буде лише останнє вказане значення." #. type: Plain text #: ../src/xz/xz.1:1059 msgid "If the compression settings exceed the I, B will attempt to adjust the settings downwards so that the limit is no longer exceeded and display a notice that automatic adjustment was done. The adjustments are done in this order: reducing the number of threads, switching to single-threaded mode if even one thread in multi-threaded mode exceeds the I, and finally reducing the LZMA2 dictionary size." msgstr "Якщо параметри стискання перевищують I<обмеження>, B спробує скоригувати параметри так, щоб обмеження не було перевищено, і покаже повідомлення про те, що було виконано автоматичне коригування. Коригування буде виконано у такому порядку: зменшення кількості потоків обробки, перемикання у однопотоковий режим, якщо хоч в одному потоці багатопотокового режиму буде перевищено I<обмеження>, і нарешті, зменшення розміру словника LZMA2." #. type: Plain text #: ../src/xz/xz.1:1067 msgid "When compressing with B<--format=raw> or if B<--no-adjust> has been specified, only the number of threads may be reduced since it can be done without affecting the compressed output." msgstr "При стисканні з використанням B<--format=raw>, або якщо було вказано B<--no-adjust>, може бути зменшена лише кількість потоків обробки, оскільки це може бути зроблено без впливу на стиснені виведені дані." #. type: Plain text #: ../src/xz/xz.1:1074 msgid "If the I cannot be met even with the adjustments described above, an error is displayed and B will exit with exit status 1." msgstr "Якщо I<обмеження> не може бути виконано за допомогою коригувань, які описано вище, буде показано повідомлення про помилку, а B завершить роботу зі станом виходу 1." #. type: Plain text #: ../src/xz/xz.1:1078 msgid "The I can be specified in multiple ways:" msgstr "Аргумент I<обмеження> можна вказати у декілька способів:" #. type: Plain text #: ../src/xz/xz.1:1088 msgid "The I can be an absolute value in bytes. Using an integer suffix like B can be useful. Example: B<--memlimit-compress=80MiB>" msgstr "Значенням I<обмеження> може бути додатне ціле значення у байтах. Можна скористатися цілочисельним суфіксом, подібним до B. Приклад: B<--memlimit-compress=80MiB>" #. type: Plain text #: ../src/xz/xz.1:1100 msgid "The I can be specified as a percentage of total physical memory (RAM). This can be useful especially when setting the B environment variable in a shell initialization script that is shared between different computers. That way the limit is automatically bigger on systems with more memory. Example: B<--memlimit-compress=70%>" msgstr "Аргумент I<обмеження> може бути задано у відсотках від загальної фізичної пам'яті системи (RAM). Це може бути корисним особливо при встановленні змінної середовища B у скрипті ініціалізації системи, який є спільним для різних комп'ютерів. У такий спосіб можна вказати вищий рівень обмеження для систем із більшим об'ємом пам'яті. Приклад: B<--memlimit-compress=70%>" #. type: Plain text #: ../src/xz/xz.1:1110 msgid "The I can be reset back to its default value by setting it to B<0>. This is currently equivalent to setting the I to B (no memory usage limit)." msgstr "Аргументу I<обмеження> може бути повернуто типове значення встановленням значення B<0>. У поточній версії це еквівалентно до встановлення значення аргументу I<обмеження> B (без обмеження на використання пам'яті)." #. type: Plain text #: ../src/xz/xz.1:1134 msgid "For 32-bit B there is a special case: if the I would be over B<4020\\ MiB>, the I is set to B<4020\\ MiB>. On MIPS32 B<2000\\ MiB> is used instead. (The values B<0> and B aren't affected by this. A similar feature doesn't exist for decompression.) This can be helpful when a 32-bit executable has access to 4\\ GiB address space (2 GiB on MIPS32) while hopefully doing no harm in other situations." msgstr "Для 32-бітової версії B передбачено особливий випадок: якщо I<обмеження> перевищуватиме B<4020\\ МіБ>, для I<обмеження> буде встановлено значення B<4020\\ MiB>. На MIPS32 замість цього буде використано B<2000\\ MiB>. (Це не стосується значень B<0> і B. Подібної можливості для розпаковування не існує.) Це може бути корисним, коли 32-бітовий виконуваний файл має доступ до простору адрес у 4\\ ГіБ (2 GiB на MIPS32), хоча, сподіваємося, не зашкодить і в інших випадках." #. type: Plain text #: ../src/xz/xz.1:1137 msgid "See also the section B." msgstr "Див. також розділ B<Використання пам'яті>." #. type: TP #: ../src/xz/xz.1:1137 #, no-wrap msgid "B<--memlimit-decompress=>I" msgstr "B<--memlimit-decompress=>I<обмеження>" #. type: Plain text #: ../src/xz/xz.1:1151 msgid "Set a memory usage limit for decompression. This also affects the B<--list> mode. If the operation is not possible without exceeding the I, B will display an error and decompressing the file will fail. See B<--memlimit-compress=>I for possible ways to specify the I." msgstr "Встановити обмеження пам'яті на розпаковування. це також вплине на режим B<--list>. Якщо дія є неможливою без перевищення I<обмеження>, B покаже повідомлення про помилку і розпаковування файла не відбудеться. Див. B<--memlimit-compress=>I<обмеження>, щоб дізнатися більше про те, як можна задати I<обмеження>." #. type: TP #: ../src/xz/xz.1:1151 #, no-wrap msgid "B<--memlimit-mt-decompress=>I" msgstr "B<--memlimit-mt-decompress=>I<обмеження>" #. type: Plain text #: ../src/xz/xz.1:1173 msgid "Set a memory usage limit for multi-threaded decompression. This can only affect the number of threads; this will never make B refuse to decompress a file. If I is too low to allow any multi-threading, the I is ignored and B will continue in single-threaded mode. Note that if also B<--memlimit-decompress> is used, it will always apply to both single-threaded and multi-threaded modes, and so the effective I for multi-threading will never be higher than the limit set with B<--memlimit-decompress>." msgstr "Встановити обмеження використання пам'яті для багатопотокового розпаковування. Це може вплинути лише на кількість потоків обробки; це ніколи не призводитиме до відмови B у розпаковуванні файла. Якщо I<обмеження є надто низьким>, щоб уможливити будь-яку багатопотокову обробку, I<обмеження> буде проігноровано, і B продовжить обробку в однопотоковому режимі. Зауважте, що якщо використано також B<--memlimit-decompress>, цей параметр буде застосовано до обох режимів, однопотокового та багатопотокового, а отже, задіяне I<обмеження> для багатопотокового режиму ніколи не перевищуватиме обмеження, яке встановлено за допомогою B<--memlimit-decompress>." #. type: Plain text #: ../src/xz/xz.1:1180 msgid "In contrast to the other memory usage limit options, B<--memlimit-mt-decompress=>I has a system-specific default I. B can be used to see the current value." msgstr "На відміну від інших параметрів обмеження використання пам'яті, B<--memlimit-mt-decompress=>I<обмеження> містить специфічне для системи типове значення I<обмеження>. Можна скористатися B для перегляду поточного значення." #. type: Plain text #: ../src/xz/xz.1:1196 msgid "This option and its default value exist because without any limit the threaded decompressor could end up allocating an insane amount of memory with some input files. If the default I is too low on your system, feel free to increase the I but never set it to a value larger than the amount of usable RAM as with appropriate input files B will attempt to use that amount of memory even with a low number of threads. Running out of memory or swapping will not improve decompression performance." msgstr "Цей параметр і його типове значення існують, оскільки без будь-яких обмежень засіб розпакування зі підтримкою потокової обробки міг би намагатися отримати величезний об'єм пам'яті для деяких файлів вхідних даних. Якщо типове I<обмеження> є надто низьким для вашої системи, не вагайтеся і збільшуйте I<обмеження>, але ніколи не встановлюйте для нього значення, яке є більшим за придатний до користування об'єм оперативної пам'яті, оскільки за відповідних файлів вхідних даних B спробує скористатися цим об'ємом пам'яті, навіть із низькою кількістю потоків обробки. Вичерпання об'єму оперативної пам'яті або використання резервної пам'яті на диску не покращить швидкодію системи під час розпаковування." #. type: Plain text #: ../src/xz/xz.1:1208 msgid "See B<--memlimit-compress=>I for possible ways to specify the I. Setting I to B<0> resets the I to the default system-specific value." msgstr "Див. B<--memlimit-compress=>I<обмеження>, щоб ознайомитися із можливими способами визначення I<обмеження>. Встановлення для I<обмеження> значення B<0> відновлює типове специфічне для системи значення I<обмеження>." #. type: TP #: ../src/xz/xz.1:1208 #, no-wrap msgid "B<-M> I, B<--memlimit=>I, B<--memory=>I" msgstr "B<-M> I<обмеження>, B<--memlimit=>I<обмеження>, B<--memory=>I<обмеження>" #. type: Plain text #: ../src/xz/xz.1:1214 msgid "This is equivalent to specifying B<--memlimit-compress=>I B<--memlimit-decompress=>I B<--memlimit-mt-decompress=>I." msgstr "Є еквівалентом визначення B<--memlimit-compress=>I<обмеження> B<--memlimit-decompress=>I<обмеження> B<--memlimit-mt-decompress=>I<обмеження>." #. type: TP #: ../src/xz/xz.1:1214 #, no-wrap msgid "B<--no-adjust>" msgstr "B<--no-adjust>" #. type: Plain text #: ../src/xz/xz.1:1224 msgid "Display an error and exit if the memory usage limit cannot be met without adjusting settings that affect the compressed output. That is, this prevents B from switching the encoder from multi-threaded mode to single-threaded mode and from reducing the LZMA2 dictionary size. Even when this option is used the number of threads may be reduced to meet the memory usage limit as that won't affect the compressed output." msgstr "Показати повідомлення про помилку і завершити роботу, якщо не вдасться виконати умови щодо обмеження використання пам'яті без коригування параметрів, які впливають на стиснених виведених даних. Тобто це забороняє B перемикати кодувальник з багатопотокового режиму на однопотоковий режим і зменшувати розмір словника LZMA2. Навіть якщо використано цей параметр, кількість потоків може бути зменшено для виконання обмеження на використання пам'яті, оскільки це не вплине на результати стискання." #. type: Plain text #: ../src/xz/xz.1:1227 msgid "Automatic adjusting is always disabled when creating raw streams (B<--format=raw>)." msgstr "Автоматичне коригування завжди буде вимкнено при створенні потоків необроблених даних (B<--format=raw>)." #. type: TP #: ../src/xz/xz.1:1227 #, no-wrap msgid "B<-T> I, B<--threads=>I" msgstr "B<-T> I<потоки>, B<--threads=>I<потоки>" #. type: Plain text #: ../src/xz/xz.1:1242 msgid "Specify the number of worker threads to use. Setting I to a special value B<0> makes B use up to as many threads as the processor(s) on the system support. The actual number of threads can be fewer than I if the input file is not big enough for threading with the given settings or if using more threads would exceed the memory usage limit." msgstr "Вказати кількість потоків обробки, якими слід скористатися. Встановлення для аргументу I<потоки> особливого значення B<0> наказує B використати не більше потоків обробки, ніж передбачено підтримку у процесорах системи. Справжня кількість потоків може бути меншою за значення I<потоки>, якщо файл вхідних даних не є достатньо великим для поділу на потоки обробки при заданих параметрах або якщо використання додаткових потоків призведе до перевищення обмеження на використання пам'яті." #. type: Plain text #: ../src/xz/xz.1:1261 msgid "The single-threaded and multi-threaded compressors produce different output. Single-threaded compressor will give the smallest file size but only the output from the multi-threaded compressor can be decompressed using multiple threads. Setting I to B<1> will use the single-threaded mode. Setting I to any other value, including B<0>, will use the multi-threaded compressor even if the system supports only one hardware thread. (B 5.2.x used single-threaded mode in this situation.)" msgstr "Засоби стискання в однопотоковому та багатопотоковому режимі дають різні результати. Однопотоковий засіб стискання дасть найменший розмір файла, але лише результати роботи багатопотокового засобу стискання може бути розпаковано з використанням декількох потоків. Встановлення для аргументу I<потоки> значення B<1> призведе до використання однопотокового режиму. Встановлення для аргументу I<потоки> будь-якого іншого значення, включно з B<0>, призведе до використання багатопотокового засобу стискання, навіть якщо у системі передбачено підтримки лише одного апаратного потоку обробки даних. (Версія B 5.2.x у цьому випадку використовувала однопотоковий режим.)" #. type: Plain text #: ../src/xz/xz.1:1280 msgid "To use multi-threaded mode with only one thread, set I to B<+1>. The B<+> prefix has no effect with values other than B<1>. A memory usage limit can still make B switch to single-threaded mode unless B<--no-adjust> is used. Support for the B<+> prefix was added in B 5.4.0." msgstr "Щоб скористатися багатопотоковим режимом із лише одним потоком обробки, встановіть для аргументу I<потоки> значення B<+1>. Префікс B<+> не впливає на значення, окрім B<1>. Обмеження на використання пам'яті можуть перемкнути B в однопотоковий режим, якщо не використано параметр B<--no-adjust>. Підтримку B<+> prefix було додано у версії B 5.4.0." #. type: Plain text #: ../src/xz/xz.1:1295 msgid "If an automatic number of threads has been requested and no memory usage limit has been specified, then a system-specific default soft limit will be used to possibly limit the number of threads. It is a soft limit in sense that it is ignored if the number of threads becomes one, thus a soft limit will never stop B from compressing or decompressing. This default soft limit will not make B switch from multi-threaded mode to single-threaded mode. The active limits can be seen with B." msgstr "Якщо було вказано автоматичне визначення кількості потоків і не вказано обмеження на використання пам'яті, буде використано специфічне для системи типове м'яке обмеження для можливого обмеження кількості потоків обробки. Це обмеження є м'яким у сенсі того, що його буде проігноровано, якщо кількість потоків зрівняється з одиницею, а отже, м'яке обмеження ніколи не запобігатиму у B стисканню або розпаковуванню. Це типове м'яке обмеження не перемкне B з багатопотокового режиму на однопотоковий режим. Активні обмеження можна переглянути за допомогою команди B." #. type: Plain text #: ../src/xz/xz.1:1302 msgid "Currently the only threading method is to split the input into blocks and compress them independently from each other. The default block size depends on the compression level and can be overridden with the B<--block-size=>I option." msgstr "У поточній версії єдиним способом поділу на потоки обробки є поділ вхідних даних на блоки і стискання цих блоків незалежно один від одного. Типовий розмір блоку залежить від рівня стискання. Його може бути перевизначено за допомогою параметра B<--block-size=>I<розмір>." #. type: Plain text #: ../src/xz/xz.1:1310 msgid "Threaded decompression only works on files that contain multiple blocks with size information in block headers. All large enough files compressed in multi-threaded mode meet this condition, but files compressed in single-threaded mode don't even if B<--block-size=>I has been used." msgstr "Розпакування з потоками обробки працює лише для файлів, які містять декілька блоків із даними щодо розміру у заголовках блоків. Цю умову задовольняють усі достатньо великі файли, які стиснено у багатопотоковому режимі, але не задовольняють будь-які файли, які було стиснуто у однопотоковому режимі, навіть якщо було використано параметр B<--block-size=>I<розмір>." #. type: Plain text #: ../src/xz/xz.1:1319 msgid "The default value for I is B<0>. In B 5.4.x and older the default is B<1>." msgstr "Типовим значенням для I<потоків> є B<0>. У B 5.4.x та старіших версіях типовим значенням є B<1>." #. type: SS #: ../src/xz/xz.1:1320 ../src/xz/xz.1:2980 #, no-wrap msgid "Custom compressor filter chains" msgstr "Нетипові ланцюжки фільтрів засобу стискання" #. type: Plain text #: ../src/xz/xz.1:1336 msgid "A custom filter chain allows specifying the compression settings in detail instead of relying on the settings associated to the presets. When a custom filter chain is specified, preset options (B<-0> \\&...\\& B<-9> and B<--extreme>) earlier on the command line are forgotten. If a preset option is specified after one or more custom filter chain options, the new preset takes effect and the custom filter chain options specified earlier are forgotten." msgstr "Нетиповий ланцюжок фільтрування уможливлює докладне визначення параметрів стискання замість використання параметрів, які пов'язано із наперед визначеними рівнями стискання. Якщо вказано нетиповий ланцюжок фільтрів, параметри рівнів стискання (B<-0> \\&...\\& B<-9> і B<--extreme>), які передують їм у рядку команди, буде знехтувано. Якщо параметр рівня стискання вказано після одного або декількох параметрів нетипового ланцюжка фільтрів, буде використано рівень стискання, а попередніми параметрами ланцюжка фільтрування буде знехтувано." #. type: Plain text #: ../src/xz/xz.1:1343 msgid "A filter chain is comparable to piping on the command line. When compressing, the uncompressed input goes to the first filter, whose output goes to the next filter (if any). The output of the last filter gets written to the compressed file. The maximum number of filters in the chain is four, but typically a filter chain has only one or two filters." msgstr "Ланцюжок фільтрів можна порівняти із конвеєром у командному рядку. При стисканні нестиснені вхідні дані потрапляють до першого фільтра, виведені ним дані йдуть до наступного фільтра (якщо такий є). Виведені останнім фільтром дані буде записано до стисненого файла. Максимальна кількість фільтрів у ланцюжку дорівнює чотирьом, але у типовому ланцюжку фільтрів використовують один або два фільтри." #. type: Plain text #: ../src/xz/xz.1:1351 msgid "Many filters have limitations on where they can be in the filter chain: some filters can work only as the last filter in the chain, some only as a non-last filter, and some work in any position in the chain. Depending on the filter, this limitation is either inherent to the filter design or exists to prevent security issues." msgstr "У багатьох фільтрів є обмеження на місце перебування у ланцюжку фільтрів: деякі фільтри можуть працювати, лише якщо вони є останніми у ланцюжку, деякі, лише якщо не останніми, а деякі працюють у будь-якій позиції ланцюжка. Залежно від фільтра, це обмеження є наслідком структури фільтра або існує для запобігання проблем із захистом." #. type: Plain text #: ../src/xz/xz.1:1374 msgid "A custom filter chain can be specified in two different ways. The options B<--filters=>I and B<--filters1=>I \\&...\\& B<--filters9=>I allow specifying an entire filter chain in one option using the liblzma filter string syntax. Alternatively, a filter chain can be specified by using one or more individual filter options in the order they are wanted in the filter chain. That is, the order of the individual filter options is significant! When decoding raw streams (B<--format=raw>), the filter chain must be specified in the same order as it was specified when compressing. Any individual filter or preset options specified before the full chain option (B<--filters=>I) will be forgotten. Individual filters specified after the full chain option will reset the filter chain." msgstr "Нетиповий ланцюжок фільтрів можна вказати двома різними способами. Параметри B<--filters=>I<фільтри> і B<--filters1=>I<фільтри> \\&...\\& B<--filters9=>I<фільтри> надають змогу вказати цілий ланцюжок фільтрів в одному варіанті з використанням синтаксису рядків фільтрів liblzma. Крім того, ланцюжок фільтрів можна вказати за допомогою одного або кількох окремих параметрів фільтрування у тому порядку, в якому їх слід використати у ланцюжку фільтрів. Тобто порядок окремих параметрів фільтра є важливим! Під час декодування необроблених потоків (B<--format=raw>) ланцюжок фільтрів має бути вказано у тому ж порядку, що й під час стиснення. Будь-який окремий фільтр або параметри попереднього налаштування, вказані перед параметром повного ланцюжка (B<--filters=>I<фільтри>), буде відкинуто. Окремі фільтри, указані після параметра повного ланцюжка, відновлять типовий ланцюжок фільтрів." #. type: Plain text #: ../src/xz/xz.1:1383 msgid "Both the full and individual filter options take filter-specific I as a comma-separated list. Extra commas in I are ignored. Every option has a default value, so specify those you want to change." msgstr "І параметр повного і параметр окремого фільтра приймають специфічні для фільтрів I<параметри> у форматі списку значень, які відокремлено комами. Зайві коми у I<параметрах> буде проігноровано. У кожного параметра є типове значення, отже, вам слід вказати ті параметри, значення яких ви хочете змінити." #. type: Plain text #: ../src/xz/xz.1:1392 msgid "To see the whole filter chain and I, use B (that is, use B<--verbose> twice). This works also for viewing the filter chain options used by presets." msgstr "Щоб переглянути увесь ланцюжок фільтрів та I<параметри>, скористайтеся командою B (тобто, скористайтеся B<--verbose> двічі). Це працює також для перегляду параметрів ланцюжка фільтрів, який використано у рівнях стискання." #. type: TP #: ../src/xz/xz.1:1392 #, no-wrap msgid "B<--filters=>I" msgstr "B<--filters=>I<фільтри>" #. type: Plain text #: ../src/xz/xz.1:1413 msgid "Specify the full filter chain or a preset in a single option. Each filter can be separated by spaces or two dashes (B<-->). I may need to be quoted on the shell command line so it is parsed as a single option. To denote I, use B<:> or B<=>. A preset can be prefixed with a B<-> and followed with zero or more flags. The only supported flag is B to apply the same options as B<--extreme>." msgstr "Визначає повний ланцюжок фільтрів або шаблон у форматі одного параметра. Кожен фільтр можна відокремити від інших пробілами або двома дефісами (B<-->). Можливо, I<фільтри> доведеться взяти в лапки в командному рядку оболонки, щоб їх було оброблено як один параметр. Для позначення I<параметрів> скористайтеся B<:> або B<=>. До шаблона можна додати префікс B<-> і завершити без прапорців або декількома прапорцями. Єдиним підтримуваним прапорцем є B для застосування тих самих параметрів, що й B<--extreme>." #. type: TP #: ../src/xz/xz.1:1413 #, no-wrap msgid "B<--filters1>=I ... B<--filters9>=I" msgstr "B<--filters1>=I<фільтри> ... B<--filters9>=I<фільтри>" #. type: Plain text #: ../src/xz/xz.1:1417 msgid "Specify up to nine additional filter chains that can be used with B<--block-list>." msgstr "Вказати до дев'яти додаткових ланцюжків фільтрів, якими можна скористатися за допомогою B<--block-list>." #. type: Plain text #: ../src/xz/xz.1:1421 msgid "For example, when compressing an archive with executable files followed by text files, the executable part could use a filter chain with a BCJ filter and the text part only the LZMA2 filter." msgstr "Наприклад, якщо виконується стискання архіву із виконуваними файлами, за якими йдуть текстові файли, для виконуваної частини може бути використано ланцюжок фільтрів з фільтром BCJ, а для текстової частини — лише фільтр LZMA2." #. type: TP #: ../src/xz/xz.1:1421 #, no-wrap msgid "B<--filters-help>" msgstr "B<--filters-help>" #. type: Plain text #: ../src/xz/xz.1:1431 msgid "Display a help message describing how to specify presets and custom filter chains in the B<--filters> and B<--filters1=>I \\&...\\& B<--filters9=>I options, and exit successfully." msgstr "Вивести довідкове повідомлення з описом того, як вказати шаблони та нетипові ланцюжки фільтрів у параметри B<--filters> і B<--filters1=>I<фільтри> \\&...\\& B<--filters9=>I<фільтри> і завершити роботу із кодом успіху." #. type: TP #: ../src/xz/xz.1:1431 #, no-wrap msgid "B<--lzma1>[B<=>I]" msgstr "B<--lzma1>[B<=>I<параметри>]" #. type: TP #: ../src/xz/xz.1:1434 #, no-wrap msgid "B<--lzma2>[B<=>I]" msgstr "B<--lzma2>[B<=>I<параметри>]" #. type: Plain text #: ../src/xz/xz.1:1439 msgid "Add LZMA1 or LZMA2 filter to the filter chain. These filters can be used only as the last filter in the chain." msgstr "Додати фільтр LZMA1 або LZMA2 до ланцюжка фільтрів. Ці фільтри може бути використано лише як останній фільтр у ланцюжку." #. type: Plain text #: ../src/xz/xz.1:1451 msgid "LZMA1 is a legacy filter, which is supported almost solely due to the legacy B<.lzma> file format, which supports only LZMA1. LZMA2 is an updated version of LZMA1 to fix some practical issues of LZMA1. The B<.xz> format uses LZMA2 and doesn't support LZMA1 at all. Compression speed and ratios of LZMA1 and LZMA2 are practically the same." msgstr "LZMA1 є застарілим фільтром, підтримку якого збережено майже лише через використання формату файлів B<.lzma>, у яких передбачено підтримку лише LZMA1. LZMA2 є оновленою версією LZMA1, у якій виправлено деякі практичні вади LZMA1. У форматі B<.xz> використано LZMA2 і взагалі не передбачено підтримки LZMA1. Швидкість стискання та коефіцієнт стискання для LZMA1 і LZMA2 є практично однаковими." #. type: Plain text #: ../src/xz/xz.1:1454 msgid "LZMA1 and LZMA2 share the same set of I:" msgstr "LZMA1 і LZMA2 спільно використовують той самий набір I<параметрів>:" #. type: TP #: ../src/xz/xz.1:1455 #, no-wrap msgid "BI" msgstr "BI<шаблон>" #. type: Plain text #: ../src/xz/xz.1:1482 msgid "Reset all LZMA1 or LZMA2 I to I. I consist of an integer, which may be followed by single-letter preset modifiers. The integer can be from B<0> to B<9>, matching the command line options B<-0> \\&...\\& B<-9>. The only supported modifier is currently B, which matches B<--extreme>. If no B is specified, the default values of LZMA1 or LZMA2 I are taken from the preset B<6>." msgstr "Скинути усі I<параметри> LZMA1 або LZMA2 до параметрів I<шаблона>. Аргумент I<шаблон> складається з цілого числа, після якого може бути однолітерний модифікатор шаблона. Ціле число може належати лише діапазону від B<0> до B<9>, що відповідає параметрам командного рядка B<-0> \\&...\\& B<-9>. Єдиним підтримуваним модифікатором у поточній версії є B, щоб відповідає параметру B<--extreme>. Якщо аргумент B<шаблон> не вказано, типові значення I<параметрів> LZMA1 або LZMA2 буде взято із шаблона B<6>." #. type: TP #: ../src/xz/xz.1:1482 #, no-wrap msgid "BI" msgstr "BI<розмір>" #. type: Plain text #: ../src/xz/xz.1:1497 msgid "Dictionary (history buffer) I indicates how many bytes of the recently processed uncompressed data is kept in memory. The algorithm tries to find repeating byte sequences (matches) in the uncompressed data, and replace them with references to the data currently in the dictionary. The bigger the dictionary, the higher is the chance to find a match. Thus, increasing dictionary I usually improves compression ratio, but a dictionary bigger than the uncompressed file is waste of memory." msgstr "Параметр I<розміру> словника (буфера журналу) визначає, скільки байтів нещодавно оброблених нестиснених даних слід зберігати у пам'яті. Алгоритм намагається знайти повторювані послідовності байтів (відповідники) у нестиснених даних і замінити їх на посилання на дані зі словника. Чим більшим є словник, тим вищою є ймовірність відшукати відповідник. Отже, збільшення I<розміру> словника, зазвичай, покращує коефіцієнт стискання, але використання словника, розмір якого перевищу є розмір нестисненого файла є простоюю витратою пам'яті." #. type: Plain text #: ../src/xz/xz.1:1506 msgid "Typical dictionary I is from 64\\ KiB to 64\\ MiB. The minimum is 4\\ KiB. The maximum for compression is currently 1.5\\ GiB (1536\\ MiB). The decompressor already supports dictionaries up to one byte less than 4\\ GiB, which is the maximum for the LZMA1 and LZMA2 stream formats." msgstr "I<Розмір> типового словника складає від 64\\ КіБ до 64\\ МіБ. Мінімальним є розмір 4\\ КіБ. Максимальним розміром для стискання у поточній версії 1.5\\ ГіБ (1536\\ МіБ). У засобі розпаковування вже передбачено підтримку словників на один байт менших за 4\\ ГіБ, що є максимальним значенням для форматів потоків даних LZMA1 і LZMA2." #. type: Plain text #: ../src/xz/xz.1:1533 msgid "Dictionary I and match finder (I) together determine the memory usage of the LZMA1 or LZMA2 encoder. The same (or bigger) dictionary I is required for decompressing that was used when compressing, thus the memory usage of the decoder is determined by the dictionary size used when compressing. The B<.xz> headers store the dictionary I either as 2^I or 2^I + 2^(I-1), so these I are somewhat preferred for compression. Other I will get rounded up when stored in the B<.xz> headers." msgstr "Аргумент I<розміру> словника і засіб пошуку відповідників (I) разом визначають параметри використання пам'яті для кодувальника LZMA1 або LZMA2. Для розпаковування потрібен такий самий (або більший) I<розмір> словника, що і для стискання, отже, використання пам'яті для засобу розпаковування буде визначено за розміром словника, який було використано для стискання. У заголовках B<.xz> зберігається I<розмір> словника або як 2^I, або як 2^I + 2^(I-1), отже, ці I<розміри> є дещо пріоритетними для стискання. Інші I<розміри> буде отримано округленням при зберіганні у заголовках B<.xz>." #. type: TP #: ../src/xz/xz.1:1533 #, no-wrap msgid "BI" msgstr "BI" #. type: Plain text #: ../src/xz/xz.1:1542 msgid "Specify the number of literal context bits. The minimum is 0 and the maximum is 4; the default is 3. In addition, the sum of I and I must not exceed 4." msgstr "Визначає кількість буквальних контекстних бітів. Мінімальною кількістю є 0, а максимальною — 4. Типовою кількістю є 3. Крім того, сума I і I має не перевищувати 4." #. type: Plain text #: ../src/xz/xz.1:1547 msgid "All bytes that cannot be encoded as matches are encoded as literals. That is, literals are simply 8-bit bytes that are encoded one at a time." msgstr "Усі байти, які не може бути закодовано як відповідності, буде закодовано як літерали. Тобто літерали є просто 8-бітовими байтами, які буде закодовано по одному за раз." #. type: Plain text #: ../src/xz/xz.1:1561 msgid "The literal coding makes an assumption that the highest I bits of the previous uncompressed byte correlate with the next byte. For example, in typical English text, an upper-case letter is often followed by a lower-case letter, and a lower-case letter is usually followed by another lower-case letter. In the US-ASCII character set, the highest three bits are 010 for upper-case letters and 011 for lower-case letters. When I is at least 3, the literal coding can take advantage of this property in the uncompressed data." msgstr "При кодуванні літералів роблять припущення, що найвищі біти I попереднього нестисненого байта корелюють із наступним байтом. Наприклад, у типовому тексті англійською за літерою у верхньому регістрі йде літера у нижньому регістрі, а за літерою у нижньому регістрі, зазвичай, йде інша літера у нижньому регістрі. У наборі символів US-ASCII найвищими трьома бітами є 010 для літер верхнього регістру і 011 для літер нижнього регістру. Якщо I дорівнює принаймні 3, при кодуванні літералів можна отримати перевагу встановлення цієї властивості для нестиснених даних." #. type: Plain text #: ../src/xz/xz.1:1570 msgid "The default value (3) is usually good. If you want maximum compression, test B. Sometimes it helps a little, and sometimes it makes compression worse. If it makes it worse, test B too." msgstr "Зазвичай, типового значення (3) достатньо. Якщо вам потрібне максимальне стискання, спробуйте B. Іноді це трохи допомагає, а іноді, робить стискання гіршим. Якщо стискання стане гіршим, спробуйте також B." #. type: TP #: ../src/xz/xz.1:1570 #, no-wrap msgid "BI" msgstr "BI" #. type: Plain text #: ../src/xz/xz.1:1574 msgid "Specify the number of literal position bits. The minimum is 0 and the maximum is 4; the default is 0." msgstr "Визначає кількість буквальних позиційних бітів. Мінімальною кількістю є 0, а максимальною — 4. Типовою кількістю є 0." #. type: Plain text #: ../src/xz/xz.1:1581 msgid "I affects what kind of alignment in the uncompressed data is assumed when encoding literals. See I below for more information about alignment." msgstr "I впливає на те, яке вирівнювання у нестиснених даних слід припускати при кодуванні літералів. Див. I нижче, щоб дізнатися більше про вирівнювання." #. type: TP #: ../src/xz/xz.1:1581 #, no-wrap msgid "BI" msgstr "BI" #. type: Plain text #: ../src/xz/xz.1:1585 msgid "Specify the number of position bits. The minimum is 0 and the maximum is 4; the default is 2." msgstr "Визначає кількість позиційних бітів. Мінімальною кількістю є 0, а максимальною — 4. Типовою кількістю є 2." #. type: Plain text #: ../src/xz/xz.1:1592 msgid "I affects what kind of alignment in the uncompressed data is assumed in general. The default means four-byte alignment (2^I=2^2=4), which is often a good choice when there's no better guess." msgstr "I впливає на те, який тип вирівнювання загалом припускатиметься для нестиснених даних. Типовим є чотирибайтове вирівнювання (2^I=2^2=4), яке, зазвичай, є добрим варіантом, якщо немає кращих припущень." #. type: Plain text #: ../src/xz/xz.1:1606 msgid "When the alignment is known, setting I accordingly may reduce the file size a little. For example, with text files having one-byte alignment (US-ASCII, ISO-8859-*, UTF-8), setting B can improve compression slightly. For UTF-16 text, B is a good choice. If the alignment is an odd number like 3 bytes, B might be the best choice." msgstr "Якщо вирівнювання є відомим, встановлення відповідним чином I може трохи зменшити розмір файла. Наприклад, у текстових файлах із однобайтовим вирівнюванням (US-ASCII, ISO-8859-*, UTF-8), встановлення значення B може трохи поліпшити стискання. Для тексту UTF-16 добрим варіантом є B. Якщо вирівнювання є непарним числом, наприклад 3 байти, найкращим вибором, ймовірно, є B." #. type: Plain text #: ../src/xz/xz.1:1614 msgid "Even though the assumed alignment can be adjusted with I and I, LZMA1 and LZMA2 still slightly favor 16-byte alignment. It might be worth taking into account when designing file formats that are likely to be often compressed with LZMA1 or LZMA2." msgstr "Хоча прогнозоване вирівнювання можна скоригувати за допомогою I і I, у LZMA1 і LZMA2 дещо пріоритетним є 16-байтове вирівнювання. Це, ймовірно, слід враховувати при компонуванні форматів файлів, які, ймовірно, часто будуть стискатися з використанням LZMA1 або LZMA2." #. type: TP #: ../src/xz/xz.1:1614 #, no-wrap msgid "BI" msgstr "BI" #. type: Plain text #: ../src/xz/xz.1:1629 msgid "Match finder has a major effect on encoder speed, memory usage, and compression ratio. Usually Hash Chain match finders are faster than Binary Tree match finders. The default depends on the I: 0 uses B, 1\\(en3 use B, and the rest use B." msgstr "Засіб пошуку відповідників має значний вплив на швидкість, використання пам'яті та коефіцієнт стискання кодувальника. Зазвичай, засоби пошуку відповідників на основі ланцюжка хешів є швидшими за засоби пошуку відповідників на основі двійкового дерева. Типовий засіб залежить від I<шаблона>: для 0 використовують B, для 1\\(en3 — B, а для решти використовують B." #. type: Plain text #: ../src/xz/xz.1:1635 msgid "The following match finders are supported. The memory usage formulas below are rough approximations, which are closest to the reality when I is a power of two." msgstr "Передбачено підтримку вказаних нижче засобів пошуку відповідників. Наведені нижче формули обчислення використання пам'яті є грубими наближеннями, які є найближчими до реальних значень, якщо значенням I<словник> є степінь двійки." #. type: TP #: ../src/xz/xz.1:1636 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: ../src/xz/xz.1:1639 msgid "Hash Chain with 2- and 3-byte hashing" msgstr "Ланцюжок хешів із 2- та 3-байтовим хешуванням" #. type: Plain text #: ../src/xz/xz.1:1643 ../src/xz/xz.1:1692 msgid "Minimum value for I: 3" msgstr "Мінімальне значення I<пріоритетності>: 3" #. type: Plain text #: ../src/xz/xz.1:1645 ../src/xz/xz.1:1664 ../src/xz/xz.1:1694 #: ../src/xz/xz.1:1713 msgid "Memory usage:" msgstr "Використання пам'яті:" #. type: Plain text #: ../src/xz/xz.1:1650 msgid "I * 7.5 (if I E= 16 MiB);" msgstr "I * 7.5 (якщо I E= 16 МіБ);" #. type: Plain text #: ../src/xz/xz.1:1655 msgid "I * 5.5 + 64 MiB (if I E 16 MiB)" msgstr "I * 5.5 + 64 МіБ (якщо I E 16 МіБ)" #. type: TP #: ../src/xz/xz.1:1655 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: ../src/xz/xz.1:1658 msgid "Hash Chain with 2-, 3-, and 4-byte hashing" msgstr "Ланцюжок хешів із 2-, 3- та 4-байтовим хешуванням" #. type: Plain text #: ../src/xz/xz.1:1662 ../src/xz/xz.1:1711 msgid "Minimum value for I: 4" msgstr "Мінімальне значення I<пріоритетності>: 4" #. type: Plain text #: ../src/xz/xz.1:1669 msgid "I * 7.5 (if I E= 32 MiB);" msgstr "I * 7.5 (якщо I E= 32 МіБ);" #. type: Plain text #: ../src/xz/xz.1:1674 msgid "I * 6.5 (if I E 32 MiB)" msgstr "I * 6.5 (якщо I E 32 МіБ)" #. type: TP #: ../src/xz/xz.1:1674 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: ../src/xz/xz.1:1677 msgid "Binary Tree with 2-byte hashing" msgstr "Двійкове дерево із 2-байтовим хешуванням" #. type: Plain text #: ../src/xz/xz.1:1681 msgid "Minimum value for I: 2" msgstr "Мінімальне значення I<пріоритетності>: 2" #. type: Plain text #: ../src/xz/xz.1:1685 msgid "Memory usage: I * 9.5" msgstr "Використання пам'яті: I * 9.5" #. type: TP #: ../src/xz/xz.1:1685 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: ../src/xz/xz.1:1688 msgid "Binary Tree with 2- and 3-byte hashing" msgstr "Двійкове дерево із 2- і 3-байтовим хешуванням" #. type: Plain text #: ../src/xz/xz.1:1699 msgid "I * 11.5 (if I E= 16 MiB);" msgstr "I * 11.5 (якщо I E= 16 МіБ);" #. type: Plain text #: ../src/xz/xz.1:1704 msgid "I * 9.5 + 64 MiB (if I E 16 MiB)" msgstr "I * 9.5 + 64 МіБ (якщо I E 16 МіБ)" #. type: TP #: ../src/xz/xz.1:1704 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: ../src/xz/xz.1:1707 msgid "Binary Tree with 2-, 3-, and 4-byte hashing" msgstr "Двійкове дерево із 2-, 3- і 4-байтовим хешуванням" #. type: Plain text #: ../src/xz/xz.1:1718 msgid "I * 11.5 (if I E= 32 MiB);" msgstr "I * 11.5 (якщо I E= 32 МіБ);" #. type: Plain text #: ../src/xz/xz.1:1723 msgid "I * 10.5 (if I E 32 MiB)" msgstr "I * 10.5 (якщо I E 32 МіБ)" #. type: TP #: ../src/xz/xz.1:1724 #, no-wrap msgid "BI" msgstr "BI<режим>" #. type: Plain text #: ../src/xz/xz.1:1745 msgid "Compression I specifies the method to analyze the data produced by the match finder. Supported I are B and B. The default is B for I 0\\(en3 and B for I 4\\(en9." msgstr "Параметр I<режиму> стискання визначає спосіб, який буде використано для аналізу даних, які створено засобом пошуку відповідників. Підтримуваними I<режимами> є B (швидкий) і B (нормальний). Типовим є режим B для I<шаблонів> 0\\(en3 і режим B для I<шаблонів> 4\\(en9." #. type: Plain text #: ../src/xz/xz.1:1754 msgid "Usually B is used with Hash Chain match finders and B with Binary Tree match finders. This is also what the I do." msgstr "Зазвичай, із засобом пошуку відповідників на основі ланцюжка хешів використовують B, а із засобом пошуку відповідників на основі двійкового дерева використовують B. Так само налаштовано і I<шаблони>." #. type: TP #: ../src/xz/xz.1:1754 #, no-wrap msgid "BI" msgstr "BI<пріоритетність>" #. type: Plain text #: ../src/xz/xz.1:1761 msgid "Specify what is considered to be a nice length for a match. Once a match of at least I bytes is found, the algorithm stops looking for possibly better matches." msgstr "Вказати, яка довжина є пріоритетною для відповідності. Щойно буде виявлено відповідність у принаймні I<пріоритетність> байтів, алгоритм зупинятиме пошук можливих кращих відповідників." #. type: Plain text #: ../src/xz/xz.1:1768 msgid "I can be 2\\(en273 bytes. Higher values tend to give better compression ratio at the expense of speed. The default depends on the I." msgstr "I<Пріоритетністю> може бути число до 2\\(en273 байтів. Вищі значення дають кращий коефіцієнт стискання за рахунок швидкості. Типове значення залежить від I<шаблона>." #. type: TP #: ../src/xz/xz.1:1768 #, no-wrap msgid "BI" msgstr "BI<глибина>" #. type: Plain text #: ../src/xz/xz.1:1778 msgid "Specify the maximum search depth in the match finder. The default is the special value of 0, which makes the compressor determine a reasonable I from I and I." msgstr "Вказати максимальну глибину пошуку у засобі пошуку відповідності. Типовим є особливе значення 0, яке наказує засобу стискання визначити прийнятну I<глибину> на основі I і I<пріоритетності>." #. type: Plain text #: ../src/xz/xz.1:1789 msgid "Reasonable I for Hash Chains is 4\\(en100 and 16\\(en1000 for Binary Trees. Using very high values for I can make the encoder extremely slow with some files. Avoid setting the I over 1000 unless you are prepared to interrupt the compression in case it is taking far too long." msgstr "Прийнятним значенням I<глибини> для ланцюжків хешів є 4\\(en100 і 16\\(en1000 для двійкових дерев. Використання дуже високих значень для I<глибини> може зробити кодувальник дуже повільним для деяких файлів. Не встановлюйте значення I<глибини>, що перевищує 1000, якщо ви не готові перервати стискання, якщо воно триватиме надто довго." #. type: Plain text #: ../src/xz/xz.1:1800 msgid "When decoding raw streams (B<--format=raw>), LZMA2 needs only the dictionary I. LZMA1 needs also I, I, and I." msgstr "При декодуванні необроблених потоків даних (B<--format=raw>), LZMA2 потребує лише I<розміру> словника. LZMA1 потребує також I, I і I." #. type: TP #: ../src/xz/xz.1:1800 #, no-wrap msgid "B<--x86>[B<=>I]" msgstr "B<--x86>[B<=>I<параметри>]" #. type: TP #: ../src/xz/xz.1:1803 #, no-wrap msgid "B<--arm>[B<=>I]" msgstr "B<--arm>[B<=>I<параметри>]" #. type: TP #: ../src/xz/xz.1:1805 #, no-wrap msgid "B<--armthumb>[B<=>I]" msgstr "B<--armthumb>[B<=>I<параметри>]" #. type: TP #: ../src/xz/xz.1:1807 #, no-wrap msgid "B<--arm64>[B<=>I]" msgstr "B<--arm64>[B<=>I<параметри>]" #. type: TP #: ../src/xz/xz.1:1809 #, no-wrap msgid "B<--powerpc>[B<=>I]" msgstr "B<--powerpc>[B<=>I<параметри>]" #. type: TP #: ../src/xz/xz.1:1811 #, no-wrap msgid "B<--ia64>[B<=>I]" msgstr "B<--ia64>[B<=>I<параметри>]" #. type: TP #: ../src/xz/xz.1:1813 #, no-wrap msgid "B<--sparc>[B<=>I]" msgstr "B<--sparc>[B<=>I<параметри>]" #. type: Plain text #: ../src/xz/xz.1:1819 msgid "Add a branch/call/jump (BCJ) filter to the filter chain. These filters can be used only as a non-last filter in the filter chain." msgstr "Додати фільтр гілок/викликів/переходів (branch/call/jump або BCJ) до ланцюжка фільтрів. Цими фільтрами можна скористатися, лише якщо вони не є останнім фільтром у ланцюжку фільтрів." #. type: Plain text #: ../src/xz/xz.1:1833 msgid "A BCJ filter converts relative addresses in the machine code to their absolute counterparts. This doesn't change the size of the data but it increases redundancy, which can help LZMA2 to produce 0\\(en15\\ % smaller B<.xz> file. The BCJ filters are always reversible, so using a BCJ filter for wrong type of data doesn't cause any data loss, although it may make the compression ratio slightly worse. The BCJ filters are very fast and use an insignificant amount of memory." msgstr "Фільтр BCJ перетворює відносні адреси у машинному коді на їхні абсолютні відповідники. Це не змінює розміру даних, але підвищує резервування, що може допомогти LZMA2 створити файл B<.xz> на 0\\(en15\\ % менше. Фільтри BCJ завжди є придатними до обернення, тому використання фільтра BCJ до помилкового типу даних не спричинятиме втрати даних, хоча може дещо погіршити коефіцієнт стискання. Фільтри BCJ є дуже швидкими і такими, що використовують незначний об'єм пам'яті." #. type: Plain text #: ../src/xz/xz.1:1836 msgid "These BCJ filters have known problems related to the compression ratio:" msgstr "Ці фільтри BCJ мають відомі проблеми, які пов'язано із рівнем стискання:" #. type: Plain text #: ../src/xz/xz.1:1843 msgid "Some types of files containing executable code (for example, object files, static libraries, and Linux kernel modules) have the addresses in the instructions filled with filler values. These BCJ filters will still do the address conversion, which will make the compression worse with these files." msgstr "У деяких типах файлів, де зберігається виконуваний код, (наприклад, в об'єктних файлах, статичних бібліотеках та модулях ядра Linux) адреси в інструкціях заповнено значеннями заповнювача. Ці фільтри BCJ виконуватимуть перетворення адрес, яке зробить стискання для цих файлів гіршим." #. type: Plain text #: ../src/xz/xz.1:1853 msgid "If a BCJ filter is applied on an archive, it is possible that it makes the compression ratio worse than not using a BCJ filter. For example, if there are similar or even identical executables then filtering will likely make the files less similar and thus compression is worse. The contents of non-executable files in the same archive can matter too. In practice one has to try with and without a BCJ filter to see which is better in each situation." msgstr "Якщо фільтр BCJ застосовано до архіву, може так статися, що він погіршить коефіцієнт стискання порівняно із варіантом без фільтра BCJ. Наприклад, якщо є подібні або навіть однакові виконувані файли, фільтрування, ймовірно, зробить ці файли менш подібними, а отже, зробить стискання гіршим. Вміст файлів, які не є виконуваними, у тому самому архіві також може вплинути на результат. На практиці, варто спробувати варіанти з фільтром BCJ і без нього, щоб визначитися із тим, що буде кращим у кожній ситуації." #. type: Plain text #: ../src/xz/xz.1:1858 msgid "Different instruction sets have different alignment: the executable file must be aligned to a multiple of this value in the input data to make the filter work." msgstr "Різні набори інструкцій мають різне вирівнювання: виконуваний файл має бути вирівняно на кратне до цього значення у вхідних даних, щоб фільтр спрацював." #. type: tbl table #: ../src/xz/xz.1:1865 #, no-wrap msgid "Filter" msgstr "Фільтр" #. type: tbl table #: ../src/xz/xz.1:1865 #, no-wrap msgid "Alignment" msgstr "Вирівнювання" #. type: tbl table #: ../src/xz/xz.1:1865 #, no-wrap msgid "Notes" msgstr "Нотатки" #. type: tbl table #: ../src/xz/xz.1:1866 #, no-wrap msgid "x86" msgstr "x86" #. type: tbl table #: ../src/xz/xz.1:1866 #, no-wrap msgid "32-bit or 64-bit x86" msgstr "32-бітова або 64-бітова x86" #. type: tbl table #: ../src/xz/xz.1:1867 #, no-wrap msgid "ARM" msgstr "ARM" #. type: tbl table #: ../src/xz/xz.1:1868 #, no-wrap msgid "ARM-Thumb" msgstr "ARM-Thumb" #. type: tbl table #: ../src/xz/xz.1:1869 #, no-wrap msgid "ARM64" msgstr "ARM64" #. type: tbl table #: ../src/xz/xz.1:1869 #, no-wrap msgid "4096-byte alignment is best" msgstr "" "Найкращим є вирівнювання за\n" ";;4096 байтами" #. type: tbl table #: ../src/xz/xz.1:1870 #, no-wrap msgid "PowerPC" msgstr "PowerPC" #. type: tbl table #: ../src/xz/xz.1:1870 #, no-wrap msgid "Big endian only" msgstr "Лише зворотний порядок байтів" #. type: tbl table #: ../src/xz/xz.1:1871 #, no-wrap msgid "IA-64" msgstr "IA-64" #. type: tbl table #: ../src/xz/xz.1:1871 #, no-wrap msgid "16" msgstr "16" #. type: tbl table #: ../src/xz/xz.1:1871 #, no-wrap msgid "Itanium" msgstr "Itanium" #. type: tbl table #: ../src/xz/xz.1:1872 #, no-wrap msgid "SPARC" msgstr "SPARC" #. type: tbl table #: ../src/xz/xz.1:1873 #, no-wrap msgid "RISC-V" msgstr "RISC-V" #. type: Plain text #: ../src/xz/xz.1:1883 msgid "Since the BCJ-filtered data is usually compressed with LZMA2, the compression ratio may be improved slightly if the LZMA2 options are set to match the alignment of the selected BCJ filter. Examples:" msgstr "Оскільки фільтровані BCJ дані, зазвичай, стискають за допомогою LZMA2, коефіцієнт стискання можна трохи поліпшити, якщо параметри LZMA2 буде встановлено так, щоб вони відповідали вирівнюванню вибраного фільтра BCJ. Приклади:" #. type: Plain text #: ../src/xz/xz.1:1889 msgid "IA-64 filter has 16-byte alignment so B is good with LZMA2 (2^4=16)." msgstr "Фільтр IA-64 має 16-байтове вирівнювання, отже B дасть добрі результати у поєднанні із LZMA2 (2^4=16)." #. type: Plain text #: ../src/xz/xz.1:1904 msgid "RISC-V code has 2-byte or 4-byte alignment depending on whether the file contains 16-bit compressed instructions (the C extension). When 16-bit instructions are used, B or B is good. When 16-bit instructions aren't present, B is the best. B can be used to check if \"RVC\" appears on the \"Flags\" line." msgstr "Код RISC-V має 2-байтове або 4-байтове вирівнювання залежно від того, чи містить файл 16-бітові стислі інструкції (розширення C). Якщо використано 16-бітові інструкції, добрі результати дасть B або B. Якщо 16-бітових інструкцій немає, найкращим варіантом є B. Можна скористатися B, щоб перевірити, чи є \"RVC\" у рядку \"Flags\"." #. type: Plain text #: ../src/xz/xz.1:1908 msgid "ARM64 is always 4-byte aligned so B is the best." msgstr "ARM64 завжди вирівняно на 4 байти, тому найкращим варіантом буде B." #. type: Plain text #: ../src/xz/xz.1:1913 msgid "The x86 filter is an exception. It's usually good to stick to LZMA2's defaults (B) when compressing x86 executables." msgstr "Фільтр x86 є виключенням. Зазвичай, добрі результати дають типові для LZMA2 значення (B), якщо стискають виконувані файли x86." #. type: Plain text #: ../src/xz/xz.1:1917 msgid "All BCJ filters support the same I:" msgstr "У всіх фільтрах BCJ передбачено підтримку тих самих I<параметрів>:" #. type: TP #: ../src/xz/xz.1:1918 #, no-wrap msgid "BI" msgstr "BI<зсув>" #. type: Plain text #: ../src/xz/xz.1:1932 msgid "Specify the start I that is used when converting between relative and absolute addresses. The I must be a multiple of the alignment of the filter (see the table above). The default is zero. In practice, the default is good; specifying a custom I is almost never useful." msgstr "Встановити початковий I<зсув>, який буде використано при перетворенні між відносною та абсолютною адресами. Значення I<зсув> має бути кратним до вирівнювання фільтра (див. таблицю вище). Типовим зсувом є нульовий. На практиці, типове значення є прийнятним; визначення нетипового значення I<зсув> майже завжди нічого корисного не дає." #. type: TP #: ../src/xz/xz.1:1933 #, no-wrap msgid "B<--delta>[B<=>I]" msgstr "B<--delta>[B<=>I<параметри>]" #. type: Plain text #: ../src/xz/xz.1:1938 msgid "Add the Delta filter to the filter chain. The Delta filter can be only used as a non-last filter in the filter chain." msgstr "Додати дельта-фільтр до ланцюжка фільтрів. Дельта-фільтр може бути використано, лише якщо він не є останнім у ланцюжку фільтрів." #. type: Plain text #: ../src/xz/xz.1:1947 msgid "Currently only simple byte-wise delta calculation is supported. It can be useful when compressing, for example, uncompressed bitmap images or uncompressed PCM audio. However, special purpose algorithms may give significantly better results than Delta + LZMA2. This is true especially with audio, which compresses faster and better, for example, with B(1)." msgstr "У поточній версії передбачено підтримку обчислення лише простої побітової дельти. Це може бути корисним при стисканні, наприклад, нестиснутих растрових зображень або нестиснутих звукових даних PCM. Втім, спеціалізовані алгоритми можуть давати значно кращі результати за дельту + LZMA2. Це правило особливо стосується звукових даних, які стискає швидше і краще, наприклад, B(1)." #. type: Plain text #: ../src/xz/xz.1:1950 msgid "Supported I:" msgstr "Підтримувані I<параметри>:" #. type: TP #: ../src/xz/xz.1:1951 #, no-wrap msgid "BI" msgstr "BI<відстань>" #. type: Plain text #: ../src/xz/xz.1:1959 msgid "Specify the I of the delta calculation in bytes. I must be 1\\(en256. The default is 1." msgstr "Вказати I<відстань> обчислень різниці у байтах. Значення I<відстань> має потрапляти у діапазон 1\\(en256. Типовим значенням є 1." #. type: Plain text #: ../src/xz/xz.1:1964 msgid "For example, with B and eight-byte input A1 B1 A2 B3 A3 B5 A4 B7, the output will be A1 B1 01 02 01 02 01 02." msgstr "Наприклад, з B та восьмибайтовими вхідними даними A1 B1 A2 B3 A3 B5 A4 B7, результатом буде A1 B1 01 02 01 02 01 02." #. type: SS #: ../src/xz/xz.1:1966 #, no-wrap msgid "Other options" msgstr "Інші параметри" #. type: TP #: ../src/xz/xz.1:1967 ../src/xzdec/xzdec.1:81 #, no-wrap msgid "B<-q>, B<--quiet>" msgstr "B<-q>, B<--quiet>" #. type: Plain text #: ../src/xz/xz.1:1974 msgid "Suppress warnings and notices. Specify this twice to suppress errors too. This option has no effect on the exit status. That is, even if a warning was suppressed, the exit status to indicate a warning is still used." msgstr "Придушити попередження та сповіщення. Вкажіть цей параметр двічі, щоб придушити також повідомлення про помилки. Цей параметр не впливає на стан виходу з програми. Тобто, навіть якщо було придушено попередження, стан виходу вказуватиме на те, що попередження були." #. type: TP #: ../src/xz/xz.1:1974 #, no-wrap msgid "B<-v>, B<--verbose>" msgstr "B<-v>, B<--verbose>" #. type: Plain text #: ../src/xz/xz.1:1983 msgid "Be verbose. If standard error is connected to a terminal, B will display a progress indicator. Specifying B<--verbose> twice will give even more verbose output." msgstr "Докладний режим повідомлень. Якщо стандартне виведення помилок з'єднано із терміналом, B показуватиме індикатор поступу. Використання B<--verbose> двічі призведе до ще докладнішого виведення." #. type: Plain text #: ../src/xz/xz.1:1985 msgid "The progress indicator shows the following information:" msgstr "Індикатор поступу показує такі дані:" #. type: Plain text #: ../src/xz/xz.1:1990 msgid "Completion percentage is shown if the size of the input file is known. That is, the percentage cannot be shown in pipes." msgstr "Частку завершеності буде показано, якщо відомий розмір файла вхідних даних. Тобто, для каналів даних частку не може бути показано." #. type: Plain text #: ../src/xz/xz.1:1993 msgid "Amount of compressed data produced (compressing) or consumed (decompressing)." msgstr "Об'єм стиснених виведених даних (стискання) або оброблених (розпаковування)." #. type: Plain text #: ../src/xz/xz.1:1996 msgid "Amount of uncompressed data consumed (compressing) or produced (decompressing)." msgstr "Об'єм незапакованих даних (стискання) або виведених даних (розпаковування)." #. type: Plain text #: ../src/xz/xz.1:2000 msgid "Compression ratio, which is calculated by dividing the amount of compressed data processed so far by the amount of uncompressed data processed so far." msgstr "Коефіцієнт стискання, який обчислено діленням об'єму оброблених стиснутих даних на об'єм оброблених нестиснутих даних." #. type: Plain text #: ../src/xz/xz.1:2007 msgid "Compression or decompression speed. This is measured as the amount of uncompressed data consumed (compression) or produced (decompression) per second. It is shown after a few seconds have passed since B started processing the file." msgstr "Швидкість стискання або розпаковування. Обчислюється як об'єм нестиснутих даних (стискання) або виведених даних (розпаковування) за секунду. Його буде показано за декілька секунд з моменту, коли B почала обробляти файл." #. type: Plain text #: ../src/xz/xz.1:2009 msgid "Elapsed time in the format M:SS or H:MM:SS." msgstr "Витрачений час у форматі Х:СС або Г:ХХ:СС." #. type: Plain text #: ../src/xz/xz.1:2017 msgid "Estimated remaining time is shown only when the size of the input file is known and a couple of seconds have already passed since B started processing the file. The time is shown in a less precise format which never has any colons, for example, 2 min 30 s." msgstr "Оцінку часу, що лишився, буде показано, лише якщо розмір файла вхідних даних є відомим, і минуло принаймні декілька секунд з моменту, коли B почала обробляти файл. Час буде показано у менш точному форматі, без двокрапок, наприклад, 2 хв. 30 с." #. type: Plain text #: ../src/xz/xz.1:2032 msgid "When standard error is not a terminal, B<--verbose> will make B print the filename, compressed size, uncompressed size, compression ratio, and possibly also the speed and elapsed time on a single line to standard error after compressing or decompressing the file. The speed and elapsed time are included only when the operation took at least a few seconds. If the operation didn't finish, for example, due to user interruption, also the completion percentage is printed if the size of the input file is known." msgstr "Якщо стандартним виведенням помилок не є термінал, B<--verbose> призведе до того, що B виведе назву файла, стиснений розмір, нестиснений розмір, коефіцієнт стискання та, можливо, також швидкість та витрачений час у одному рядку до стандартного виведення помилок після стискання або розпаковування файла. Швидкість та витрачений час буде включено, лише якщо дія триває принаймні декілька секунд. Якщо дію не буде завершено, наприклад, через втручання користувача, буде також виведено частку виконання, якщо відомий розмір файла вхідних даних." #. type: TP #: ../src/xz/xz.1:2032 ../src/xzdec/xzdec.1:87 #, no-wrap msgid "B<-Q>, B<--no-warn>" msgstr "B<-Q>, B<--no-warn>" #. type: Plain text #: ../src/xz/xz.1:2042 msgid "Don't set the exit status to 2 even if a condition worth a warning was detected. This option doesn't affect the verbosity level, thus both B<--quiet> and B<--no-warn> have to be used to not display warnings and to not alter the exit status." msgstr "Не встановлювати стан виходу 2, навіть якщо було виявлено відповідність умові, яка варта попередження. Цей параметр не впливає на рівень докладності повідомлень, отже, слід використати B<--quiet> і B<--no-warn>, щоб програма не показувала попереджень і не змінювала стан виходу." #. type: TP #: ../src/xz/xz.1:2042 #, no-wrap msgid "B<--robot>" msgstr "B<--robot>" #. type: Plain text #: ../src/xz/xz.1:2054 msgid "Print messages in a machine-parsable format. This is intended to ease writing frontends that want to use B instead of liblzma, which may be the case with various scripts. The output with this option enabled is meant to be stable across B releases. See the section B for details." msgstr "Виводити повідомлення у придатному для обробки комп'ютером форматі. Цей формат призначено для полегшення написання оболонок, які використовуватимуть B замість liblzma, що може бути зручним для різноманітних скриптів. Виведені дані з цим параметром має бути стабільним для усіх випусків B. Докладніший опис можна знайти у розділі B<РЕЖИМ РОБОТА>." #. type: TP #: ../src/xz/xz.1:2054 #, no-wrap msgid "B<--info-memory>" msgstr "B<--info-memory>" #. type: Plain text #: ../src/xz/xz.1:2061 msgid "Display, in human-readable format, how much physical memory (RAM) and how many processor threads B thinks the system has and the memory usage limits for compression and decompression, and exit successfully." msgstr "Вивести у придатному для читання людиною форматі, скільки фізичної пам'яті (RAM) та скільки потоків процесора є за даними B у системі, обмеження для стискання та розпаковування, а потім успішно завершити роботу." #. type: TP #: ../src/xz/xz.1:2061 ../src/xzdec/xzdec.1:94 #, no-wrap msgid "B<-h>, B<--help>" msgstr "B<-h>, B<--help>" #. type: Plain text #: ../src/xz/xz.1:2065 msgid "Display a help message describing the most commonly used options, and exit successfully." msgstr "Вивести повідомлення про помилку з описом найбільш типових використаних параметрів і успішно завершити роботу." #. type: TP #: ../src/xz/xz.1:2065 #, no-wrap msgid "B<-H>, B<--long-help>" msgstr "B<-H>, B<--long-help>" #. type: Plain text #: ../src/xz/xz.1:2070 msgid "Display a help message describing all features of B, and exit successfully" msgstr "Вивести довідкове повідомлення з описом усіх можливостей B і успішно завершити роботу" #. type: TP #: ../src/xz/xz.1:2070 ../src/xzdec/xzdec.1:97 #, no-wrap msgid "B<-V>, B<--version>" msgstr "B<-V>, B<--version>" #. type: Plain text #: ../src/xz/xz.1:2079 msgid "Display the version number of B and liblzma in human readable format. To get machine-parsable output, specify B<--robot> before B<--version>." msgstr "Вивести номер версії B та liblzma у зручному для читання форматі. Щоб отримати дані, зручні для обробки на комп'ютері, вкажіть B<--robot> до B<--version>." #. type: SH #: ../src/xz/xz.1:2080 #, no-wrap msgid "ROBOT MODE" msgstr "РЕЖИМ РОБОТА" #. type: Plain text #: ../src/xz/xz.1:2097 msgid "The robot mode is activated with the B<--robot> option. It makes the output of B easier to parse by other programs. Currently B<--robot> is supported only together with B<--list>, B<--filters-help>, B<--info-memory>, and B<--version>. It will be supported for compression and decompression in the future." msgstr "Режим робота активують за допомогою параметра B<--robot>. Він спрощує обробку виведених B даних іншими програмами. У поточній версії підтримку B<--robot> передбачено лише разом із B<--list>, B<--filters-help>, B<--info-memory> і B<--version>. У майбутньому підтримку параметра буде передбачено для стискання та розпаковування." #. type: SS #: ../src/xz/xz.1:2098 #, no-wrap msgid "List mode" msgstr "Режим списку" #. type: Plain text #: ../src/xz/xz.1:2103 msgid "B uses tab-separated output. The first column of every line has a string that indicates the type of the information found on that line:" msgstr "У B використано табуляції для поділу виведених даних. Першим стовпчиком у кожному рядку є рядок, що вказує на тип відомостей, які можна знайти у цьому рядку:" #. type: TP #: ../src/xz/xz.1:2103 #, no-wrap msgid "B" msgstr "B<назва>" #. type: Plain text #: ../src/xz/xz.1:2107 msgid "This is always the first line when starting to list a file. The second column on the line is the filename." msgstr "Це завжди перший рядок на початку списку файла. Другим стовпчиком у рядку є назва файла." #. type: TP #: ../src/xz/xz.1:2107 #, no-wrap msgid "B" msgstr "B<файл>" #. type: Plain text #: ../src/xz/xz.1:2115 msgid "This line contains overall information about the B<.xz> file. This line is always printed after the B line." msgstr "У цьому рядку містяться загальні відомості щодо файла B<.xz>. Цей рядок завжди виводять після рядка B." #. type: TP #: ../src/xz/xz.1:2115 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: ../src/xz/xz.1:2125 msgid "This line type is used only when B<--verbose> was specified. There are as many B lines as there are streams in the B<.xz> file." msgstr "Цей тип рядка використовують, лише якщо було вказано B<--verbose>. Буде стільки рядків B, скільки потоків у файлі B<.xz>." #. type: TP #: ../src/xz/xz.1:2125 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: ../src/xz/xz.1:2140 msgid "This line type is used only when B<--verbose> was specified. There are as many B lines as there are blocks in the B<.xz> file. The B lines are shown after all the B lines; different line types are not interleaved." msgstr "Цей тип рядка використовують, лише якщо було вказано B<--verbose>. Буде стільки рядків B, скільки блоків у файлі B<.xz>. Рядки B буде показано після усіх рядків B; різні типи рядків не перемежовуються." #. type: TP #: ../src/xz/xz.1:2140 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: ../src/xz/xz.1:2155 msgid "This line type is used only when B<--verbose> was specified twice. This line is printed after all B lines. Like the B line, the B line contains overall information about the B<.xz> file." msgstr "Цей тип рядків використовують, лише якщо B<--verbose> було вказано двічі. Цей рядок буде виведено після усіх рядків B. Подібно до рядка B, рядок B містить загальні відомості щодо файла B<.xz>." #. type: TP #: ../src/xz/xz.1:2155 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: ../src/xz/xz.1:2159 msgid "This line is always the very last line of the list output. It shows the total counts and sizes." msgstr "Цей рядок завжди є найостаннішим рядком у виведеному списку. У ньому буде показано загальні кількості та розміри." #. type: Plain text #: ../src/xz/xz.1:2163 msgid "The columns of the B lines:" msgstr "Стовпчики у рядках B<файла>:" #. type: IP #: ../src/xz/xz.1:2165 ../src/xz/xz.1:2202 ../src/xz/xz.1:2228 #: ../src/xz/xz.1:2298 ../src/xz/xz.1:2325 ../src/xz/xz.1:2414 #, no-wrap msgid "2." msgstr "2." #. type: Plain text #: ../src/xz/xz.1:2167 msgid "Number of streams in the file" msgstr "Кількість потоків у файлі" #. type: IP #: ../src/xz/xz.1:2167 ../src/xz/xz.1:2204 ../src/xz/xz.1:2230 #: ../src/xz/xz.1:2303 ../src/xz/xz.1:2327 ../src/xz/xz.1:2421 #, no-wrap msgid "3." msgstr "3." #. type: Plain text #: ../src/xz/xz.1:2169 msgid "Total number of blocks in the stream(s)" msgstr "Загальна кількість блоків у потоках" #. type: IP #: ../src/xz/xz.1:2169 ../src/xz/xz.1:2206 ../src/xz/xz.1:2233 #: ../src/xz/xz.1:2313 ../src/xz/xz.1:2329 ../src/xz/xz.1:2428 #, no-wrap msgid "4." msgstr "4." #. type: Plain text #: ../src/xz/xz.1:2171 msgid "Compressed size of the file" msgstr "Розмір стисненого файла" #. type: IP #: ../src/xz/xz.1:2171 ../src/xz/xz.1:2208 ../src/xz/xz.1:2235 #: ../src/xz/xz.1:2331 ../src/xz/xz.1:2440 #, no-wrap msgid "5." msgstr "5." #. type: Plain text #: ../src/xz/xz.1:2173 msgid "Uncompressed size of the file" msgstr "Розмір нестисненого файла" #. type: IP #: ../src/xz/xz.1:2173 ../src/xz/xz.1:2210 ../src/xz/xz.1:2237 #: ../src/xz/xz.1:2333 ../src/xz/xz.1:2452 #, no-wrap msgid "6." msgstr "6." #. type: Plain text #: ../src/xz/xz.1:2179 msgid "Compression ratio, for example, B<0.123>. If ratio is over 9.999, three dashes (B<--->) are displayed instead of the ratio." msgstr "Коефіцієнт стискання, наприклад, B<0.123>. Якщо коефіцієнт перевищує 9.999, замість коефіцієнта буде показано дефіси (B<--->)." #. type: IP #: ../src/xz/xz.1:2179 ../src/xz/xz.1:2212 ../src/xz/xz.1:2239 #: ../src/xz/xz.1:2335 #, no-wrap msgid "7." msgstr "7." #. type: Plain text #: ../src/xz/xz.1:2192 msgid "Comma-separated list of integrity check names. The following strings are used for the known check types: B, B, B, and B. For unknown check types, BI is used, where I is the Check ID as a decimal number (one or two digits)." msgstr "Список відокремлених комами назв перевірок цілісності. Наведені нижче рядки використовують для відомих типів перевірок: B, B, B і B. Для невідомих типів перевірок буде використано BI, де I є ідентифікатором перевірки у форматі десяткового числа (одна або дві цифри)." #. type: IP #: ../src/xz/xz.1:2192 ../src/xz/xz.1:2214 ../src/xz/xz.1:2241 #: ../src/xz/xz.1:2338 #, no-wrap msgid "8." msgstr "8." #. type: Plain text #: ../src/xz/xz.1:2194 msgid "Total size of stream padding in the file" msgstr "Загальний розмір доповнення потоку у файлі" #. type: Plain text #: ../src/xz/xz.1:2200 msgid "The columns of the B lines:" msgstr "Стовпчики у рядках B:" #. type: Plain text #: ../src/xz/xz.1:2204 msgid "Stream number (the first stream is 1)" msgstr "Номер потоку (перший потік має номер 1)" #. type: Plain text #: ../src/xz/xz.1:2206 msgid "Number of blocks in the stream" msgstr "Кількість блоків у потоці" #. type: Plain text #: ../src/xz/xz.1:2208 msgid "Compressed start offset" msgstr "Зсув початку стисненого" #. type: Plain text #: ../src/xz/xz.1:2210 msgid "Uncompressed start offset" msgstr "Зсув початку нестисненого" #. type: Plain text #: ../src/xz/xz.1:2212 msgid "Compressed size (does not include stream padding)" msgstr "Стиснений розмір (не включає доповнення потоку)" #. type: Plain text #: ../src/xz/xz.1:2214 ../src/xz/xz.1:2243 ../src/xz/xz.1:2333 msgid "Uncompressed size" msgstr "Нестиснутий розмір" #. type: Plain text #: ../src/xz/xz.1:2216 ../src/xz/xz.1:2245 msgid "Compression ratio" msgstr "Рівень стискання" #. type: IP #: ../src/xz/xz.1:2216 ../src/xz/xz.1:2243 ../src/xz/xz.1:2340 #, no-wrap msgid "9." msgstr "9." #. type: Plain text #: ../src/xz/xz.1:2218 ../src/xz/xz.1:2247 msgid "Name of the integrity check" msgstr "Назва перевірки цілісності" #. type: IP #: ../src/xz/xz.1:2218 ../src/xz/xz.1:2245 ../src/xz/xz.1:2356 #, no-wrap msgid "10." msgstr "10." #. type: Plain text #: ../src/xz/xz.1:2220 msgid "Size of stream padding" msgstr "Розмір доповнення потоку" #. type: Plain text #: ../src/xz/xz.1:2226 msgid "The columns of the B lines:" msgstr "Стовпчики у рядках B:" #. type: Plain text #: ../src/xz/xz.1:2230 msgid "Number of the stream containing this block" msgstr "Номер потоку, що містить цей блок" #. type: Plain text #: ../src/xz/xz.1:2233 msgid "Block number relative to the beginning of the stream (the first block is 1)" msgstr "Номер блоку відносно початку потоку (перший блок має номер 1)" #. type: Plain text #: ../src/xz/xz.1:2235 msgid "Block number relative to the beginning of the file" msgstr "Номер блоку відносно початку файла" #. type: Plain text #: ../src/xz/xz.1:2237 msgid "Compressed start offset relative to the beginning of the file" msgstr "Зсув початку стисненого відносно початку файла" #. type: Plain text #: ../src/xz/xz.1:2239 msgid "Uncompressed start offset relative to the beginning of the file" msgstr "Зсув початку нестисненого відносно початку файла" #. type: Plain text #: ../src/xz/xz.1:2241 msgid "Total compressed size of the block (includes headers)" msgstr "Загальний стиснений розмір блоку (включено з заголовками)" #. type: Plain text #: ../src/xz/xz.1:2259 msgid "If B<--verbose> was specified twice, additional columns are included on the B lines. These are not displayed with a single B<--verbose>, because getting this information requires many seeks and can thus be slow:" msgstr "Якщо B<--verbose> було вказано двічі, до рядків B буде включено додаткові стовпчики. Ці стовпчики не буде показано, якщо вказано одинарний параметр B<--verbose>, оскільки отримання цих відомостей потребує багатьох позиціювань, а ця процедура може бути повільною:" #. type: IP #: ../src/xz/xz.1:2261 ../src/xz/xz.1:2361 #, no-wrap msgid "11." msgstr "11." #. type: Plain text #: ../src/xz/xz.1:2263 msgid "Value of the integrity check in hexadecimal" msgstr "Значення перевірки цілісності у шістнадцятковій формі" #. type: IP #: ../src/xz/xz.1:2263 ../src/xz/xz.1:2371 #, no-wrap msgid "12." msgstr "12." #. type: Plain text #: ../src/xz/xz.1:2265 msgid "Block header size" msgstr "Розмір заголовка блоку" #. type: IP #: ../src/xz/xz.1:2265 #, no-wrap msgid "13." msgstr "13." #. type: Plain text #: ../src/xz/xz.1:2275 msgid "Block flags: B indicates that compressed size is present, and B indicates that uncompressed size is present. If the flag is not set, a dash (B<->) is shown instead to keep the string length fixed. New flags may be added to the end of the string in the future." msgstr "Прапорці блоку: B вказує, що наявний стиснений розмір, а B вказує, що наявний нестиснений розмір. Якщо прапорець не встановлено, буде показано (B<->) замість підтримання фіксованого розміру рядка. У майбутньому наприкінці рядка може бути додано нові прапорці." #. type: IP #: ../src/xz/xz.1:2275 #, no-wrap msgid "14." msgstr "14." #. type: Plain text #: ../src/xz/xz.1:2278 msgid "Size of the actual compressed data in the block (this excludes the block header, block padding, and check fields)" msgstr "Розмір справжніх стиснених даних у блоці (це включає заголовок блоку, доповнення блоку та поля перевірок)" #. type: IP #: ../src/xz/xz.1:2278 #, no-wrap msgid "15." msgstr "15." #. type: Plain text #: ../src/xz/xz.1:2283 msgid "Amount of memory (in bytes) required to decompress this block with this B version" msgstr "Об'єм пам'яті (у байтах), який потрібен для розпаковування цього блоку за допомогою цієї версії B" #. type: IP #: ../src/xz/xz.1:2283 #, no-wrap msgid "16." msgstr "16." #. type: Plain text #: ../src/xz/xz.1:2290 msgid "Filter chain. Note that most of the options used at compression time cannot be known, because only the options that are needed for decompression are stored in the B<.xz> headers." msgstr "Ланцюжок фільтрів. Зауважте, що більшість параметрів, які використано під час стискання, не є наперед відомим, оскільки у заголовках B<.xz> зберігаються лише параметри, які потрібні для розпаковування." #. type: Plain text #: ../src/xz/xz.1:2296 msgid "The columns of the B lines:" msgstr "Стовпчики у рядках B:" #. type: Plain text #: ../src/xz/xz.1:2303 msgid "Amount of memory (in bytes) required to decompress this file with this B version" msgstr "Об'єм пам'яті (у байтах), який потрібен для розпаковування цього файла за допомогою цієї версії B" #. type: Plain text #: ../src/xz/xz.1:2309 ../src/xz/xz.1:2367 msgid "B or B indicating if all block headers have both compressed size and uncompressed size stored in them" msgstr "B або B вказує, якщо усі заголовки блоків містять одразу стиснений розмір та розпакований розмір" #. type: Plain text #: ../src/xz/xz.1:2313 ../src/xz/xz.1:2371 msgid "I B I<5.1.2alpha:>" msgstr "I<Починаючи з> B I<5.1.2alpha:>" #. type: Plain text #: ../src/xz/xz.1:2317 ../src/xz/xz.1:2375 msgid "Minimum B version required to decompress the file" msgstr "Мінімальна версія B, яка потрібна для розпаковування файла" #. type: Plain text #: ../src/xz/xz.1:2323 msgid "The columns of the B line:" msgstr "Стовпчики рядка B:" #. type: Plain text #: ../src/xz/xz.1:2327 msgid "Number of streams" msgstr "Кількість потоків" #. type: Plain text #: ../src/xz/xz.1:2329 msgid "Number of blocks" msgstr "Кількість блоків" #. type: Plain text #: ../src/xz/xz.1:2331 msgid "Compressed size" msgstr "Стиснутий розмір" #. type: Plain text #: ../src/xz/xz.1:2335 msgid "Average compression ratio" msgstr "Середній коефіцієнт стискання" #. type: Plain text #: ../src/xz/xz.1:2338 msgid "Comma-separated list of integrity check names that were present in the files" msgstr "Список відокремлених комами назв перевірок цілісності, результати яких наявні у файлах" #. type: Plain text #: ../src/xz/xz.1:2340 msgid "Stream padding size" msgstr "Розмір доповнення потоку" #. type: Plain text #: ../src/xz/xz.1:2346 msgid "Number of files. This is here to keep the order of the earlier columns the same as on B lines." msgstr "Кількість файлів. Наявний тут для зберігання такого самого порядку стовпчиків, що і у попередніх рядках B." #. type: Plain text #: ../src/xz/xz.1:2354 msgid "If B<--verbose> was specified twice, additional columns are included on the B line:" msgstr "Якщо B<--verbose> було вказано двічі, до рядка B буде включено додаткові стовпчики:" #. type: Plain text #: ../src/xz/xz.1:2361 msgid "Maximum amount of memory (in bytes) required to decompress the files with this B version" msgstr "Максимальний об'єм пам'яті (у байтах), який потрібен для розпаковування файлів за допомогою цієї версії B" #. type: Plain text #: ../src/xz/xz.1:2381 msgid "Future versions may add new line types and new columns can be added to the existing line types, but the existing columns won't be changed." msgstr "У майбутніх версіях може бути додано нові типи рядків і нові стовпчики до наявних типів рядків, але наявні стовпчики мають лишитися незмінними." #. type: SS #: ../src/xz/xz.1:2382 #, no-wrap msgid "Filters help" msgstr "Довідка з фільтрування" #. type: Plain text #: ../src/xz/xz.1:2385 msgid "B prints the supported filters in the following format:" msgstr "B виведе список підтримуваних фільтрів у такому форматі:" #. type: Plain text #: ../src/xz/xz.1:2387 msgid "IB<:>I