# SOME DESCRIPTIVE TITLE. # Copyright (C) YEAR Free Software Foundation, Inc. # FIRST AUTHOR , YEAR. # #, fuzzy msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "POT-Creation-Date: 2001-04-22 10:31+0200\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=CHARSET\n" "Content-Transfer-Encoding: 8-bit\n" #: lib/argmatch.c:159 #, c-format msgid "invalid argument %s for `%s'" msgstr "" #: lib/argmatch.c:160 #, c-format msgid "ambiguous argument %s for `%s'" msgstr "" #. We try to put synonyms on the same line. The assumption is that #. synonyms follow each other #: lib/argmatch.c:178 msgid "Valid arguments are:" msgstr "" #: lib/closeout.c:104 src/cat.c:183 src/cat.c:264 src/cat.c:317 #: src/cksum.c:267 src/head.c:140 src/head.c:170 src/tail.c:313 #: src/tail.c:1574 src/tr.c:1651 src/tr.c:1897 src/tr.c:2005 msgid "write error" msgstr "" #: lib/error.c:117 msgid "Unknown system error" msgstr "" #: lib/getopt.c:686 #, c-format msgid "%s: option `%s' is ambiguous\n" msgstr "" #: lib/getopt.c:711 #, c-format msgid "%s: option `--%s' doesn't allow an argument\n" msgstr "" #: lib/getopt.c:716 #, c-format msgid "%s: option `%c%s' doesn't allow an argument\n" msgstr "" #: lib/getopt.c:734 lib/getopt.c:907 #, c-format msgid "%s: option `%s' requires an argument\n" msgstr "" #. --option #: lib/getopt.c:763 #, c-format msgid "%s: unrecognized option `--%s'\n" msgstr "" #. +option or -option #: lib/getopt.c:767 #, c-format msgid "%s: unrecognized option `%c%s'\n" msgstr "" #. 1003.2 specifies the format of this message. #: lib/getopt.c:793 #, c-format msgid "%s: illegal option -- %c\n" msgstr "" #: lib/getopt.c:796 #, c-format msgid "%s: invalid option -- %c\n" msgstr "" #. 1003.2 specifies the format of this message. #: lib/getopt.c:826 lib/getopt.c:956 #, c-format msgid "%s: option requires an argument -- %c\n" msgstr "" #: lib/getopt.c:873 #, c-format msgid "%s: option `-W %s' is ambiguous\n" msgstr "" #: lib/getopt.c:891 #, c-format msgid "%s: option `-W %s' doesn't allow an argument\n" msgstr "" #: lib/human.c:341 msgid "block size" msgstr "" #: lib/makepath.c:177 #, c-format msgid "cannot create directory %s" msgstr "" #: lib/makepath.c:183 lib/makepath.c:425 #, c-format msgid "%s exists but is not a directory" msgstr "" #: lib/makepath.c:321 lib/makepath.c:383 lib/makepath.c:444 #, c-format msgid "cannot change owner and/or group of %s" msgstr "" #: lib/makepath.c:343 #, c-format msgid "cannot chdir to directory, %s" msgstr "" #: lib/makepath.c:397 lib/makepath.c:450 #, c-format msgid "cannot change permissions of %s" msgstr "" #. If XALLOC_FAIL_FUNC is NULL, or does return, display this message #. before exiting when memory is exhausted. Goes through gettext. #: lib/obstack.c:477 lib/xmalloc.c:66 msgid "memory exhausted" msgstr "" #. Get translations for open and closing quotation marks. #. #. The message catalog should translate "`" to a left #. quotation mark suitable for the locale, and similarly for #. "'". If the catalog has no translation, #. locale_quoting_style quotes `like this', and #. clocale_quoting_style quotes "like this". #. #. For example, an American English Unicode locale should #. translate "`" to U+201C (LEFT DOUBLE QUOTATION MARK), and #. should translate "'" to U+201D (RIGHT DOUBLE QUOTATION #. MARK). A British English Unicode locale should instead #. translate these to U+2018 (LEFT SINGLE QUOTATION MARK) and #. U+2019 (RIGHT SINGLE QUOTATION MARK), respectively. #: lib/quotearg.c:259 msgid "`" msgstr "" #: lib/quotearg.c:260 msgid "'" msgstr "" #: lib/rpmatch.c:78 msgid "^[yY]" msgstr "" #: lib/rpmatch.c:81 msgid "^[nN]" msgstr "" #: lib/unicodeio.c:138 #, c-format msgid "cannot output U+%04X: iconv function not usable" msgstr "" #: lib/unicodeio.c:149 #, c-format msgid "U+%04X: character out of range" msgstr "" #: lib/unicodeio.c:181 lib/unicodeio.c:190 #, c-format msgid "cannot convert U+%04X to local character set" msgstr "" #: lib/unicodeio.c:196 #, c-format msgid "cannot output U+%04X: iconv function not available" msgstr "" #: lib/userspec.c:179 msgid "invalid user" msgstr "" #: lib/userspec.c:180 msgid "invalid group" msgstr "" #: lib/userspec.c:182 msgid "cannot get the login group of a numeric UID" msgstr "" #: lib/userspec.c:184 msgid "cannot omit both user and group" msgstr "" #: lib/version-etc.c:38 msgid "Copyright (C) 2001 Free Software Foundation, Inc." msgstr "" #: lib/version-etc.c:60 #, c-format msgid "Written by %s.\n" msgstr "" #: lib/version-etc.c:66 msgid "" "This is free software; see the source for copying conditions. There is NO\n" "warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.\n" msgstr "" #: src/cat.c:89 src/cksum.c:276 src/comm.c:71 src/csplit.c:1498 src/cut.c:163 #: src/expand.c:105 src/fmt.c:269 src/fold.c:62 src/head.c:80 src/join.c:142 #: src/md5sum.c:121 src/nl.c:172 src/od.c:265 src/paste.c:399 src/pr.c:2740 #: src/ptx.c:1855 src/sort.c:281 src/split.c:84 src/sum.c:58 src/tac.c:123 #: src/tail.c:232 src/tr.c:323 src/tsort.c:93 src/unexpand.c:371 #: src/uniq.c:103 src/wc.c:120 #, c-format msgid "Try `%s --help' for more information.\n" msgstr "" #: src/cat.c:93 #, c-format msgid "Usage: %s [OPTION] [FILE]...\n" msgstr "" #: src/cat.c:97 msgid "" "Concatenate FILE(s), or standard input, to standard output.\n" "\n" " -A, --show-all equivalent to -vET\n" " -b, --number-nonblank number nonblank output lines\n" " -e equivalent to -vE\n" " -E, --show-ends display $ at end of each line\n" " -n, --number number all output lines\n" " -s, --squeeze-blank never more than one single blank line\n" " -t equivalent to -vT\n" " -T, --show-tabs display TAB characters as ^I\n" " -u (ignored)\n" " -v, --show-nonprinting use ^ and M- notation, except for LFD and TAB\n" " --help display this help and exit\n" " --version output version information and exit\n" "\n" "With no FILE, or when FILE is -, read standard input.\n" msgstr "" #: src/cat.c:116 msgid "\n -B, --binary use binary writes to the console device.\n\n" msgstr "" #: src/cat.c:121 src/cksum.c:291 src/comm.c:88 src/csplit.c:1529 src/cut.c:197 #: src/expand.c:125 src/fmt.c:290 src/fold.c:80 src/head.c:104 src/join.c:176 #: src/md5sum.c:152 src/nl.c:214 src/od.c:330 src/paste.c:418 src/pr.c:2828 #: src/sort.c:344 src/split.c:107 src/sum.c:76 src/tac.c:141 src/tail.c:289 #: src/tr.c:384 src/tsort.c:105 src/unexpand.c:391 src/uniq.c:131 src/wc.c:140 msgid "\nReport bugs to ." msgstr "" #: src/cat.c:305 #, c-format msgid "cannot do ioctl on `%s'" msgstr "" #: src/cat.c:645 src/od.c:1192 msgid "standard output" msgstr "" #: src/cat.c:776 #, c-format msgid "%s: input file is output file" msgstr "" #: src/cksum.c:234 #, c-format msgid "%s: file too long" msgstr "" #: src/cksum.c:280 #, c-format msgid "" "Usage: %s [FILE]...\n" " or: %s [OPTION]\n" msgstr "" #: src/cksum.c:285 msgid "" "Print CRC checksum and byte counts of each FILE.\n" "\n" " --help display this help and exit\n" " --version output version information and exit\n" msgstr "" #: src/comm.c:75 #, c-format msgid "Usage: %s [OPTION]... LEFT_FILE RIGHT_FILE\n" msgstr "" #: src/comm.c:79 msgid "" "Compare sorted files LEFT_FILE and RIGHT_FILE line by line.\n" "\n" " -1 suppress lines unique to left file\n" " -2 suppress lines unique to right file\n" " -3 suppress lines unique to both files\n" " --help display this help and exit\n" " --version output version information and exit\n" msgstr "" #: src/csplit.c:292 src/csplit.c:1487 src/tac-pipe.c:57 src/tr.c:1593 #: src/tr.c:1696 src/tr.c:1739 msgid "read error" msgstr "" #: src/csplit.c:586 msgid "input disappeared" msgstr "" #: src/csplit.c:708 src/csplit.c:719 #, c-format msgid "%s: line number out of range" msgstr "" #: src/csplit.c:746 #, c-format msgid "%s: `%s': line number out of range" msgstr "" #: src/csplit.c:749 src/csplit.c:801 #, c-format msgid " on repetition %d\n" msgstr "" #: src/csplit.c:797 #, c-format msgid "%s: `%s': match not found" msgstr "" #: src/csplit.c:858 src/csplit.c:898 src/tac.c:257 msgid "error in regular expression search" msgstr "" #: src/csplit.c:1001 #, c-format msgid "write error for `%s'" msgstr "" #: src/csplit.c:1073 #, c-format msgid "%s: `+' or `-' expected after delimeter" msgstr "" #: src/csplit.c:1077 #, c-format msgid "%s: integer expected after `%c'" msgstr "" #: src/csplit.c:1097 #, c-format msgid "%s: `}' is required in repeat count" msgstr "" #: src/csplit.c:1107 #, c-format msgid "%s}: integer required between `{' and `}'" msgstr "" #: src/csplit.c:1134 #, c-format msgid "%s: closing delimeter `%c' missing" msgstr "" #: src/csplit.c:1150 #, c-format msgid "%s: invalid regular expression: %s" msgstr "" #: src/csplit.c:1183 #, c-format msgid "%s: invalid pattern" msgstr "" #: src/csplit.c:1186 #, c-format msgid "%s: line number must be greater than zero" msgstr "" #: src/csplit.c:1192 #, c-format msgid "line number `%s' is smaller than preceding line number, %s" msgstr "" #: src/csplit.c:1198 #, c-format msgid "warning: line number `%s' is the same as preceding line number" msgstr "" #: src/csplit.c:1320 msgid "missing conversion specifier in suffix" msgstr "" #: src/csplit.c:1326 #, c-format msgid "invalid conversion specifier in suffix: %c" msgstr "" #: src/csplit.c:1329 #, c-format msgid "invalid conversion specifier in suffix: \\%.3o" msgstr "" #: src/csplit.c:1361 #, c-format msgid "missing %% conversion specification in suffix" msgstr "" #: src/csplit.c:1364 #, c-format msgid "too many %% conversion specifications in suffix" msgstr "" #: src/csplit.c:1447 #, c-format msgid "%s: invalid number" msgstr "" #: src/csplit.c:1470 msgid "too few arguments" msgstr "" #: src/csplit.c:1502 #, c-format msgid "Usage: %s [OPTION]... FILE PATTERN...\n" msgstr "" #: src/csplit.c:1506 #, c-format msgid "" "Output pieces of FILE separated by PATTERN(s) to files `xx01', `xx02', ...,\n" "and output byte counts of each piece to standard output.\n" "\n" " -b, --suffix-format=FORMAT use sprintf FORMAT instead of %%d\n" " -f, --prefix=PREFIX use PREFIX instead of `xx'\n" " -k, --keep-files do not remove output files on errors\n" " -n, --digits=DIGITS use specified number of digits instead of 2\n" " -s, --quiet, --silent do not print counts of output file sizes\n" " -z, --elide-empty-files remove empty output files\n" " --help display this help and exit\n" " --version output version information and exit\n" "\n" "Read standard input if FILE is -. Each PATTERN may be:\n" "\n" " INTEGER copy up to but not including specified line number\n" " /REGEXP/[OFFSET] copy up to but not including a matching line\n" " %%REGEXP%%[OFFSET] skip to, but not including a matching line\n" " {INTEGER} repeat the previous pattern specified number of times\n" " {*} repeat the previous pattern as many times as possible\n" "\n" "A line OFFSET is a required `+' or `-' followed by a positive integer.\n" msgstr "" #: src/cut.c:167 src/expand.c:109 src/fold.c:66 src/head.c:84 src/nl.c:176 #: src/paste.c:403 src/pr.c:2744 src/sort.c:285 src/sum.c:62 src/tac.c:127 #: src/tail.c:236 src/unexpand.c:375 src/wc.c:124 #, c-format msgid "Usage: %s [OPTION]... [FILE]...\n" msgstr "" #: src/cut.c:171 msgid "" "Print selected parts of lines from each FILE to standard output.\n" "\n" " -b, --bytes=LIST output only these bytes\n" " -c, --characters=LIST output only these characters\n" " -d, --delimiter=DELIM use DELIM instead of TAB for field delimiter\n" " -f, --fields=LIST output only these fields; also print any line\n" " that contains no delimiter character, unless\n" " the -s option is specified\n" " -n (ignored)\n" " -s, --only-delimited do not print lines not containing delimiters\n" " --output-delimiter=STRING use STRING as the output delimiter\n" " the default is to use the input delimiter\n" " --help display this help and exit\n" " --version output version information and exit\n" "\n" "Use one, and only one of -b, -c or -f. Each LIST is made up of one\n" "range, or many ranges separated by commas. Each range is one of:\n" "\n" " N N'th byte, character or field, counted from 1\n" " N- from N'th byte, character or field, to end of line\n" " N-M from N'th to M'th (included) byte, character or field\n" " -M from first to M'th (included) byte, character or field\n" "\n" "With no FILE, or when FILE is -, read standard input.\n" msgstr "" #: src/cut.c:252 src/cut.c:283 src/cut.c:343 msgid "invalid byte or field list" msgstr "" #: src/cut.c:613 src/cut.c:622 msgid "only one type of list may be specified" msgstr "" #: src/cut.c:616 msgid "missing list of positions" msgstr "" #: src/cut.c:625 msgid "missing list of fields" msgstr "" #: src/cut.c:632 msgid "the delimiter must be a single character" msgstr "" #: src/cut.c:662 msgid "you must specify a list of bytes, characters, or fields" msgstr "" #: src/cut.c:665 msgid "a delimiter may be specified only when operating on fields" msgstr "" #: src/cut.c:668 msgid "" "suppressing non-delimited lines makes sense\n" "\tonly when operating on fields" msgstr "" #: src/expand.c:113 msgid "" "Convert tabs in each FILE to spaces, writing to standard output.\n" "With no FILE, or when FILE is -, read standard input.\n" "\n" " -i, --initial do not convert TABs after non whitespace\n" " -t, --tabs=NUMBER have tabs NUMBER characters apart, not 8\n" " -t, --tabs=LIST use comma separated list of explicit tab positions\n" " --help display this help and exit\n" " --version output version information and exit\n" "\n" "Instead of -t NUMBER or -t LIST, -NUMBER or -LIST may be used.\n" msgstr "" #: src/expand.c:167 src/unexpand.c:153 msgid "tab size contains an invalid character" msgstr "" #: src/expand.c:185 src/unexpand.c:171 msgid "tab size cannot be 0" msgstr "" #: src/expand.c:187 src/unexpand.c:173 msgid "tab sizes must be ascending" msgstr "" #: src/fmt.c:273 #, c-format msgid "Usage: %s [-DIGITS] [OPTION]... [FILE]...\n" msgstr "" #: src/fmt.c:274 msgid "" "Reformat each paragraph in the FILE(s), writing to standard output.\n" "If no FILE or if FILE is `-', read standard input.\n" "\n" "Mandatory arguments to long options are mandatory for short options too.\n" " -c, --crown-margin preserve indentation of first two lines\n" " -p, --prefix=STRING combine only lines having STRING as prefix\n" " -s, --split-only split long lines, but do not refill\n" " -t, --tagged-paragraph indentation of first line different from second\n" " -u, --uniform-spacing one space between words, two after sentences\n" " -w, --width=NUMBER maximum line width (default of 75 columns)\n" " --help display this help and exit\n" " --version output version information and exit\n" "\n" "In -wNUMBER, the letter `w' may be omitted.\n" msgstr "" #: src/fmt.c:375 src/nl.c:497 #, c-format msgid "invalid line number increment: `%s'" msgstr "" #: src/fold.c:70 msgid "" "Wrap input lines in each FILE (standard input by default), writing to\n" "standard output.\n" "\n" " -b, --bytes count bytes rather than columns\n" " -s, --spaces break at spaces\n" " -w, --width=WIDTH use WIDTH columns instead of 80\n" " --help display this help and exit\n" " --version output version information and exit\n" msgstr "" #: src/fold.c:280 #, c-format msgid "invalid number of columns: `%s'" msgstr "" #: src/head.c:88 msgid "" "Print first 10 lines of each FILE to standard output.\n" "With more than one FILE, precede each with a header giving the file name.\n" "With no FILE, or when FILE is -, read standard input.\n" "\n" " -c, --bytes=SIZE print first SIZE bytes\n" " -n, --lines=NUMBER print first NUMBER lines instead of first 10\n" " -q, --quiet, --silent never print headers giving file names\n" " -v, --verbose always print headers giving file names\n" " --help display this help and exit\n" " --version output version information and exit\n" "\n" "SIZE may have a multiplier suffix: b for 512, k for 1K, m for 1 Meg.\n" "If -VALUE is used as first OPTION, read -c VALUE when one of\n" "multipliers bkm follows concatenated, else read -n VALUE.\n" msgstr "" #: src/head.c:195 src/md5sum.c:329 src/md5sum.c:668 src/od.c:953 src/od.c:1240 #: src/od.c:1313 src/od.c:1968 src/pr.c:1154 src/pr.c:1361 src/pr.c:1483 #: src/tac.c:481 src/tac.c:487 src/tr.c:2012 src/tsort.c:585 msgid "standard input" msgstr "" #: src/head.c:231 src/tail.c:1389 msgid "invalid number of lines" msgstr "" #: src/head.c:232 src/tail.c:1390 msgid "invalid number of bytes" msgstr "" #: src/head.c:238 src/tail.c:1312 #, c-format msgid "%s: %s is so large that it is not representable" msgstr "" #: src/head.c:239 src/tail.c:1314 msgid "number of lines" msgstr "" #: src/head.c:239 src/tail.c:1315 msgid "number of bytes" msgstr "" #: src/head.c:318 #, c-format msgid "unrecognized option `-%c'" msgstr "" #: src/join.c:146 #, c-format msgid "Usage: %s [OPTION]... FILE1 FILE2\n" msgstr "" #: src/join.c:150 msgid "" "For each pair of input lines with identical join fields, write a line to\n" "standard output. The default join field is the first, delimited\n" "by whitespace. When FILE1 or FILE2 (not both) is -, read standard input.\n" "\n" " -a SIDE print unpairable lines coming from file SIDE\n" " -e EMPTY replace missing input fields with EMPTY\n" " -i, --ignore-case ignore differences in case when comparing fields\n" " -j FIELD (obsolescent) equivalent to `-1 FIELD -2 FIELD'\n" " -j1 FIELD (obsolescent) equivalent to `-1 FIELD'\n" " -j2 FIELD (obsolescent) equivalent to `-2 FIELD'\n" " -o FORMAT obey FORMAT while constructing output line\n" " -t CHAR use CHAR as input and output field separator\n" " -v SIDE like -a SIDE, but suppress joined output lines\n" " -1 FIELD join on this FIELD of file 1\n" " -2 FIELD join on this FIELD of file 2\n" " --help display this help and exit\n" " --version output version information and exit\n" "\n" "Unless -t CHAR is given, leading blanks separate fields and are ignored,\n" "else fields are separated by CHAR. Any FIELD is a field number counted\n" "from 1. FORMAT is one or more comma or blank separated specifications,\n" "each being `SIDE.FIELD' or `0'. Default FORMAT outputs the join field,\n" "the remaining fields from FILE1, the remaining fields from FILE2, all\n" "separated by CHAR.\n" msgstr "" #. `0' must be all alone -- no `.FIELD'. #: src/join.c:641 #, c-format msgid "invalid field specifier: `%s'" msgstr "" #: src/join.c:655 src/join.c:771 src/join.c:807 #, c-format msgid "invalid field number: `%s'" msgstr "" #: src/join.c:668 #, c-format msgid "invalid file number in field spec: `%s'" msgstr "" #: src/join.c:791 #, c-format msgid "invalid field number for file 1: `%s'" msgstr "" #: src/join.c:800 #, c-format msgid "invalid field number for file 2: `%s'" msgstr "" #: src/join.c:832 msgid "too many non-option arguments" msgstr "" #: src/join.c:854 msgid "too few non-option arguments" msgstr "" #: src/join.c:865 msgid "both files cannot be standard input" msgstr "" #: src/md5sum.c:125 #, c-format msgid "" "Usage: %s [OPTION] [FILE]...\n" " or: %s [OPTION] --check [FILE]\n" "Print or check %s (%d-bit) checksums.\n" "With no FILE, or when FILE is -, read standard input.\n" "\n" " -b, --binary read files in binary mode (default on DOS/Windows)\n" " -c, --check check %s sums against given list\n" " -t, --text read files in text mode (default)\n" "\n" "The following two options are useful only when verifying checksums:\n" " --status don't output anything, status code shows success\n" " -w, --warn warn about improperly formated checksum lines\n" "\n" " --help display this help and exit\n" " --version output version information and exit\n" "\n" "The sums are computed as described in %s. When checking, the input\n" "should be a former output of this program. The default mode is to print\n" "a line with checksum, a character indicating type (`*' for binary, ` ' for\n" "text), and name for each FILE.\n" msgstr "" #: src/md5sum.c:373 #, c-format msgid "%s: %lu: improperly formatted %s checksum line" msgstr "" #: src/md5sum.c:395 #, c-format msgid "%s: FAILED open or read\n" msgstr "" #: src/md5sum.c:418 msgid "FAILED" msgstr "" #: src/md5sum.c:418 msgid "OK" msgstr "" #: src/md5sum.c:431 #, c-format msgid "%s: read error" msgstr "" #. Warn if no tests are found. #: src/md5sum.c:444 #, c-format msgid "%s: no properly formatted %s checksum lines found" msgstr "" #: src/md5sum.c:457 #, c-format msgid "WARNING: %d of %d listed %s could not be read" msgstr "" #: src/md5sum.c:460 msgid "file" msgstr "" #: src/md5sum.c:460 msgid "files" msgstr "" #: src/md5sum.c:466 #, c-format msgid "WARNING: %d of %d computed %s did NOT match" msgstr "" #: src/md5sum.c:469 msgid "checksum" msgstr "" #: src/md5sum.c:469 msgid "checksums" msgstr "" #: src/md5sum.c:551 msgid "the --binary and --text options are meaningless when verifying checksums" msgstr "" #: src/md5sum.c:559 msgid "the --string and --check options are mutually exclusive" msgstr "" #: src/md5sum.c:566 msgid "the --status option is meaningful only when verifying checksums" msgstr "" #: src/md5sum.c:573 msgid "the --warn option is meaningful only when verifying checksums" msgstr "" #: src/md5sum.c:583 msgid "no files may be specified when using --string" msgstr "" #: src/md5sum.c:605 msgid "only one argument may be specified when using --check" msgstr "" #: src/nl.c:180 msgid "" "Write each FILE to standard output, with line numbers added.\n" "With no FILE, or when FILE is -, read standard input.\n" "\n" " -b, --body-numbering=STYLE use STYLE for numbering body lines\n" " -d, --section-delimiter=CC use CC for separating logical pages\n" " -f, --footer-numbering=STYLE use STYLE for numbering footer lines\n" " -h, --header-numbering=STYLE use STYLE for numbering header lines\n" " -i, --page-increment=NUMBER line number increment at each line\n" " -l, --join-blank-lines=NUMBER group of NUMBER empty lines counted as one\n" " -n, --number-format=FORMAT insert line numbers according to FORMAT\n" " -p, --no-renumber do not reset line numbers at logical pages\n" " -s, --number-separator=STRING add STRING after (possible) line number\n" " -v, --first-page=NUMBER first line number on each logical page\n" " -w, --number-width=NUMBER use NUMBER columns for line numbers\n" " --help display this help and exit\n" " --version output version information and exit\n" "\n" "By default, selects -v1 -i1 -l1 -sTAB -w6 -nrn -hn -bt -fn. CC are\n" "two delimiter characters for separating logical pages, a missing\n" "second character implies :. Type \\\\ for \\. STYLE is one of:\n" "\n" " a number all lines\n" " t number only nonempty lines\n" " n number no lines\n" " pREGEXP number only lines that contain a match for REGEXP\n" "\n" "FORMAT is one of:\n" "\n" " ln left justified, no leading zeros\n" " rn right justified, no leading zeros\n" " rz right justified, leading zeros\n" "\n" msgstr "" #: src/nl.c:487 #, c-format msgid "invalid starting line number: `%s'" msgstr "" #: src/nl.c:510 #, c-format msgid "invalid number of blank lines: `%s'" msgstr "" #: src/nl.c:524 #, c-format msgid "invalid line number field width: `%s'" msgstr "" #: src/od.c:269 #, c-format msgid "" "Usage: %s [OPTION]... [FILE]...\n" " or: %s --traditional [FILE] [[+]OFFSET [[+]LABEL]]\n" msgstr "" #: src/od.c:274 msgid "" "Write an unambiguous representation, octal bytes by default, of FILE\n" "to standard output. With no FILE, or when FILE is -, read standard input.\n" "\n" " -A, --address-radix=RADIX decide how file offsets are printed\n" " -j, --skip-bytes=BYTES skip BYTES input bytes first on each file\n" " -N, --read-bytes=BYTES limit dump to BYTES input bytes per file\n" " -s, --strings[=BYTES] output strings of at least BYTES graphic chars\n" " -t, --format=TYPE select output format or formats\n" " -v, --output-duplicates do not use * to mark line suppression\n" " -w, --width[=BYTES] output BYTES bytes per output line\n" " --traditional accept arguments in pre-POSIX form\n" " --help display this help and exit\n" " --version output version information and exit\n" "\n" "Pre-POSIX format specifications may be intermixed, they accumulate:\n" " -a same as -t a, select named characters\n" " -b same as -t oC, select octal bytes\n" " -c same as -t c, select ASCII characters or backslash escapes\n" " -d same as -t u2, select unsigned decimal shorts\n" " -f same as -t fF, select floats\n" " -h same as -t x2, select hexadecimal shorts\n" " -i same as -t d2, select decimal shorts\n" " -l same as -t d4, select decimal longs\n" " -o same as -t o2, select octal shorts\n" " -x same as -t x2, select hexadecimal shorts\n" msgstr "" #: src/od.c:301 msgid "" "\n" "For older syntax (second call format), OFFSET means -j OFFSET. LABEL\n" "is the pseudo-address at first byte printed, incremented when dump is\n" "progressing. For OFFSET and LABEL, a 0x or 0X prefix indicates\n" "hexadecimal, suffixes maybe . for octal and b multiply by 512.\n" "\n" "TYPE is made up of one or more of these specifications:\n" "\n" " a named character\n" " c ASCII character or backslash escape\n" " d[SIZE] signed decimal, SIZE bytes per integer\n" " f[SIZE] floating point, SIZE bytes per integer\n" " o[SIZE] octal, SIZE bytes per integer\n" " u[SIZE] unsigned decimal, SIZE bytes per integer\n" " x[SIZE] hexadecimal, SIZE bytes per integer\n" "\n" "SIZE is a number. For TYPE in doux, SIZE may also be C for\n" "sizeof(char), S for sizeof(short), I for sizeof(int) or L for\n" "sizeof(long). If TYPE is f, SIZE may also be F for sizeof(float), D\n" "for sizeof(double) or L for sizeof(long double).\n" "\n" "RADIX is d for decimal, o for octal, x for hexadecimal or n for none.\n" "BYTES is hexadecimal with 0x or 0X prefix, it is multiplied by 512\n" "with b suffix, by 1024 with k and by 1048576 with m. Adding a z suffix to\n" "any type adds a display of printable characters to the end of each line\n" "of output. -s without a number implies 3. -w without a number implies 32.\n" "By default, od uses -A o -t d2 -w 16.\n" msgstr "" #. The integer at P in S would overflow an unsigned long. #. A digit string that long is sufficiently odd looking #. that the following diagnostic is sufficient. #: src/od.c:682 src/od.c:801 #, c-format msgid "invalid type string `%s'" msgstr "" #: src/od.c:692 #, c-format msgid "" "invalid type string `%s';\n" "this system doesn't provide a %lu-byte integral type" msgstr "" #: src/od.c:811 #, c-format msgid "" "invalid type string `%s';\n" "this system doesn't provide a %lu-byte floating point type" msgstr "" #: src/od.c:874 #, c-format msgid "invalid character `%c' in type string `%s'" msgstr "" #: src/od.c:1038 msgid "cannot skip past end of combined input" msgstr "" #: src/od.c:1381 msgid "old-style offset" msgstr "" #: src/od.c:1386 src/od.c:1718 src/tail.c:1399 #, c-format msgid "%s is larger than the maximum file size on this system" msgstr "" #: src/od.c:1694 #, c-format msgid "invalid output address radix `%c'; it must be one character from [doxn]" msgstr "" #: src/od.c:1705 msgid "skip argument" msgstr "" #: src/od.c:1714 msgid "limit argument" msgstr "" #: src/od.c:1729 msgid "minimum string length" msgstr "" #: src/od.c:1734 src/od.c:1793 #, c-format msgid "%s is too large" msgstr "" #: src/od.c:1791 msgid "width specification" msgstr "" #: src/od.c:1813 msgid "no type may be specified when dumping strings" msgstr "" #: src/od.c:1858 #, c-format msgid "invalid second operand in compatibility mode `%s'" msgstr "" #: src/od.c:1879 msgid "in compatibility mode, the last two arguments must be offsets" msgstr "" #: src/od.c:1886 msgid "compatibility mode supports at most three arguments" msgstr "" #: src/od.c:1942 #, c-format msgid "warning: invalid width %lu; using %d instead" msgstr "" #: src/od.c:1958 #, c-format msgid "%d: fmt=\"%s\" width=%d\n" msgstr "" #: src/paste.c:208 msgid "standard input is closed" msgstr "" #: src/paste.c:407 msgid "" "Write lines consisting of the sequentially corresponding lines from\n" "each FILE, separated by TABs, to standard output.\n" "With no FILE, or when FILE is -, read standard input.\n" "\n" " -d, --delimiters=LIST reuse characters from LIST instead of TABs\n" " -s, --serial paste one file at a time instead of in parallel\n" " --help display this help and exit\n" " --version output version information and exit\n" "\n" msgstr "" #: src/pr.c:794 #, c-format msgid "`--pages' invalid range of page numbers: `%s'" msgstr "" #: src/pr.c:806 #, c-format msgid "`--pages' invalid starting page number: `%s'" msgstr "" #: src/pr.c:818 #, c-format msgid "`--pages' invalid ending page number: `%s'" msgstr "" #: src/pr.c:825 msgid "`--pages' starting page number is larger than ending page number" msgstr "" #: src/pr.c:901 msgid "`--pages=FIRST_PAGE[:LAST_PAGE]' missing argument" msgstr "" #: src/pr.c:912 #, c-format msgid "`--columns=COLUMN' invalid number of columns: `%s'" msgstr "" #: src/pr.c:966 #, c-format msgid "`-l PAGE_LENGTH' invalid number of lines: `%s'" msgstr "" #: src/pr.c:990 #, c-format msgid "`-N NUMBER' invalid starting line number: `%s'" msgstr "" #: src/pr.c:1002 #, c-format msgid "`-o MARGIN' invalid line offset: `%s'" msgstr "" #: src/pr.c:1043 #, c-format msgid "`-w PAGE_WIDTH' invalid number of characters: `%s'" msgstr "" #: src/pr.c:1055 #, c-format msgid "`-W PAGE_WIDTH' invalid number of characters: `%s'" msgstr "" #: src/pr.c:1069 msgid "%b %e %H:%M %Y" msgstr "" #: src/pr.c:1078 msgid "Cannot specify number of columns when printing in parallel." msgstr "" #: src/pr.c:1082 msgid "Cannot specify both printing across and printing in parallel." msgstr "" #: src/pr.c:1178 #, c-format msgid "`-%c' extra characters or invalid number in the argument: `%s'" msgstr "" #: src/pr.c:1289 msgid "page width too narrow" msgstr "" #: src/pr.c:2352 #, c-format msgid "starting page number larger than total number of pages: `%d'" msgstr "" #. The translator must ensure that formatting the translation of #. "Page %d" does not generate more than (sizeof page_text - 1) #. bytes. #: src/pr.c:2383 #, c-format msgid "Page %d" msgstr "" #: src/pr.c:2749 msgid "" "Paginate or columnate FILE(s) for printing.\n" "\n" " +FIRST_PAGE[:LAST_PAGE], --pages=FIRST_PAGE[:LAST_PAGE]\n" " begin [stop] printing with page FIRST_[LAST_]PAGE\n" " -COLUMN, --columns=COLUMN\n" " produce COLUMN-column output and print columns down,\n" " unless -a is used. Balance number of lines in the\n" " columns on each page.\n" " -a, --across print columns across rather than down, used together\n" " with -COLUMN\n" " -c, --show-control-chars\n" " use hat notation (^G) and octal backslash notation\n" " -d, --double-space\n" " double space the output\n" " -D, --date-format=FORMAT\n" " use FORMAT for the header date\n" " -e[CHAR[WIDTH]], --expand-tabs[=CHAR[WIDTH]]\n" " expand input CHARs (TABs) to tab WIDTH (8)\n" " -F, -f, --form-feed\n" " use form feeds instead of newlines to separate pages\n" " (by a 3-line page header with -F or a 5-line header\n" " and trailer without -F)\n" msgstr "" #: src/pr.c:2773 msgid "" " -h HEADER, --header=HEADER\n" " use a centered HEADER instead of filename in page header,\n" " -h \"\" prints a blank line, don't use -h\"\"\n" " -i[CHAR[WIDTH]], --output-tabs[=CHAR[WIDTH]]\n" " replace spaces with CHARs (TABs) to tab WIDTH (8)\n" " -J, --join-lines merge full lines, turns off -W line truncation, no column\n" " alignment, -S[STRING] sets separators\n" " -l PAGE_LENGTH, --length=PAGE_LENGTH\n" " set the page length to PAGE_LENGTH (66) lines\n" " (default number of lines of text 56, and with -F 63)\n" " -m, --merge print all files in parallel, one in each column,\n" " truncate lines, but join lines of full length with -J\n" " -n[SEP[DIGITS]], --number-lines[=SEP[DIGITS]]\n" " number lines, use DIGITS (5) digits, then SEP (TAB),\n" " default counting starts with 1st line of input file\n" " -N NUMBER, --first-line-number=NUMBER\n" " start counting with NUMBER at 1st line of first\n" " page printed (see +FIRST_PAGE)\n" " -o MARGIN, --indent=MARGIN\n" " offset each line with MARGIN (zero) spaces, do not\n" " affect -w or -W, MARGIN will be added to PAGE_WIDTH\n" " -r, --no-file-warnings\n" " omit warning when a file cannot be opened\n" msgstr "" #: src/pr.c:2798 msgid "" " -s[CHAR],--separator[=CHAR]\n" " separate columns by a single character, default for CHAR\n" " is the character without -w and 'no char' with -w\n" " -s[CHAR] turns off line truncation of all 3 column\n" " options (-COLUMN|-a -COLUMN|-m) except -w is set\n" " -S[STRING], --sep-string[=STRING]\n" " separate columns by an optional STRING, don't use\n" " -S \"STRING\", -S only: No separator used (same as -S\"\"),\n" " without -S: Default separator with -J and \n" " otherwise (same as -S\" \"), no effect on column options\n" " -t, --omit-header omit page headers and trailers\n" " -T, --omit-pagination\n" " omit page headers and trailers, eliminate any pagination\n" " by form feeds set in input files\n" " -v, --show-nonprinting\n" " use octal backslash notation\n" " -w PAGE_WIDTH, --width=PAGE_WIDTH\n" " set page width to PAGE_WIDTH (72) characters for\n" " multiple text-column output only, -s[char] turns off (72)\n" " -W PAGE_WIDTH, --page-width=PAGE_WIDTH\n" " set page width to PAGE_WIDTH (72) characters always,\n" " truncate lines, except -J option is set, no interference\n" " with -S or -s\n" " --help display this help and exit\n" " --version output version information and exit\n" "\n" "-T implied by -l nn when nn <= 10 or <= 3 with -F. With no FILE, or when\n" "FILE is -, read standard input.\n" msgstr "" #: src/ptx.c:410 #, c-format msgid "%s (for regexp `%s')" msgstr "" #: src/ptx.c:1859 #, c-format msgid "" "Usage: %s [OPTION]... [INPUT]... (without -G)\n" " or: %s -G [OPTION]... [INPUT [OUTPUT]]\n" msgstr "" #: src/ptx.c:1863 msgid "" "Mandatory arguments to long options are mandatory for short options too.\n" "\n" " -A, --auto-reference output automatically generated references\n" " -C, --copyright display Copyright and copying conditions\n" " -G, --traditional behave more like System V `ptx'\n" " -F, --flag-truncation=STRING use STRING for flagging line truncations\n" " -M, --macro-name=STRING macro name to use instead of `xx'\n" " -O, --format=roff generate output as roff directives\n" " -R, --right-side-refs put references at right, not counted in -w\n" " -S, --sentence-regexp=REGEXP for end of lines or end of sentences\n" " -T, --format=tex generate output as TeX directives\n" " -W, --word-regexp=REGEXP use REGEXP to match each keyword\n" " -b, --break-file=FILE word break characters in this FILE\n" " -f, --ignore-case fold lower case to upper case for sorting\n" " -g, --gap-size=NUMBER gap size in columns between output fields\n" " -i, --ignore-file=FILE read ignore word list from FILE\n" " -o, --only-file=FILE read only word list from this FILE\n" " -r, --references first field of each line is a reference\n" " -t, --typeset-mode - not implemented -\n" " -w, --width=NUMBER output width in columns, reference excluded\n" " --help display this help and exit\n" " --version output version information and exit\n" "\n" "With no FILE or if FILE is -, read Standard Input. `-F /' by default.\n" msgstr "" #: src/ptx.c:1965 msgid "" "This program is free software; you can redistribute it and/or modify\n" "it under the terms of the GNU General Public License as published by\n" "the Free Software Foundation; either version 2, or (at your option)\n" "any later version.\n" "\n" "This program is distributed in the hope that it will be useful,\n" "but WITHOUT ANY WARRANTY; without even the implied warranty of\n" "MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n" "GNU General Public License for more details.\n" "\n" "You should have received a copy of the GNU General Public License\n" "along with this program; if not, write to the Free Software Foundation,\n" "Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n" msgstr "" #: src/sort.c:289 msgid "" "Write sorted concatenation of all FILE(s) to standard output.\n" "\n" "Ordering options:\n" "\n" " -b, --ignore-leading-blanks ignore leading blanks\n" " -d, --dictionary-order consider only blanks and alphanumeric characters\n" " -f, --ignore-case fold lower case to upper case characters\n" " -g, --general-numeric-sort compare according to general numerical value\n" " -i, --ignore-nonprinting consider only printable characters\n" " -M, --month-sort compare (unknown) < `JAN' < ... < `DEC'\n" " -n, --numeric-sort compare according to string numerical value\n" " -r, --reverse reverse the result of comparisons\n" "\n" msgstr "" #: src/sort.c:305 #, c-format msgid "" "Other options:\n" "\n" " -c, --check check whether input is sorted; do not sort\n" " -k, --key=POS1[,POS2] start a key at POS1, end it at POS 2 (origin 1)\n" " -m, --merge merge already sorted files; do not sort\n" " -o, --output=FILE write result to FILE instead of standard output\n" " -s, --stable stabilize sort by disabling last-resort comparison\n" " -S, --buffer-size=SIZE use SIZE for main memory buffer\n" " -t, --field-separator=SEP use SEP instead of non- to whitespace transition\n" " -T, --temporary-directory=DIR use DIR for temporaries, not $TMPDIR or %s\n" " multiple options specify multiple directories\n" " -u, --unique with -c: check for strict ordering\n" " otherwise: output only the first of an equal run\n" " -z, --zero-terminated end lines with 0 byte, not newline\n" " +POS1 [-POS2] start a key at POS1, end it before POS2 (origin 0)\n" " Warning: this option is obsolescent\n" " --help display this help and exit\n" " --version output version information and exit\n" "\n" msgstr "" #: src/sort.c:327 #, c-format msgid "" "POS is F[.C][OPTS], where F is the field number and C the character position\n" "in the field, both counted from one with -k, from zero with the obsolescent\n" "form. OPTS is made up of one or more single-letter ordering options, which\n" "override global ordering options for that key. If no key is given, use the\n" "entire line as the key.\n" "\n" "SIZE may be followed by the following multiplicative suffixes:\n" "%% 1%% of memory, b 1, k 1024 (default), and so on for M, G, T, P, E, Z, Y.\n" "\n" "With no FILE, or when FILE is -, read standard input.\n" "\n" "*** WARNING ***\n" "The locale specified by the environment affects sort order.\n" "Set LC_ALL=C to get the traditional sort order that uses native byte values.\n" msgstr "" #: src/sort.c:444 msgid "cannot create temporary file" msgstr "" #: src/sort.c:467 msgid "open failed" msgstr "" #: src/sort.c:487 src/sort.c:2488 msgid "close failed" msgstr "" #: src/sort.c:495 msgid "write failed" msgstr "" #: src/sort.c:641 msgid "sort size" msgstr "" #: src/sort.c:715 msgid "stat failed" msgstr "" #: src/sort.c:966 msgid "read failed" msgstr "" #: src/sort.c:1566 #, c-format msgid "%s: %s:%s: disorder: " msgstr "" #: src/sort.c:1570 msgid "standard error" msgstr "" #: src/sort.c:2028 #, c-format msgid "%s: invalid field specification `%s'" msgstr "" #: src/sort.c:2054 #, c-format msgid "%s: count `%.*s' too large" msgstr "" #: src/sort.c:2060 #, c-format msgid "%s: invalid count at start of `%s'" msgstr "" #: src/sort.c:2290 msgid "invalid number after `-'" msgstr "" #: src/sort.c:2293 src/sort.c:2339 src/sort.c:2366 msgid "invalid number after `.'" msgstr "" #: src/sort.c:2296 src/sort.c:2375 msgid "stray character in field spec" msgstr "" #: src/sort.c:2330 msgid "invalid number at field start" msgstr "" #. Provoke with `sort -k0' #: src/sort.c:2334 src/sort.c:2362 msgid "field number is zero" msgstr "" #. Provoke with `sort -k1.0' #: src/sort.c:2343 msgid "character offset is zero" msgstr "" #: src/sort.c:2358 msgid "invalid number after `,'" msgstr "" #. Provoke with `sort -txx'. Complain about #. "multi-character tab" instead of "multibyte tab", so #. that the diagnostic's wording does not need to be #. changed once multibyte characters are supported. #: src/sort.c:2403 #, c-format msgid "multi-character tab `%s'" msgstr "" #: src/sort.c:2471 #, c-format msgid "extra operand `%s' not allowed with -c" msgstr "" #: src/split.c:88 #, c-format msgid "Usage: %s [OPTION] [INPUT [PREFIX]]\n" msgstr "" #: src/split.c:92 msgid "" "Output fixed-size pieces of INPUT to PREFIXaa, PREFIXab, ...; default\n" "PREFIX is `x'. With no INPUT, or when INPUT is -, read standard input.\n" "\n" " -b, --bytes=SIZE put SIZE bytes per output file\n" " -C, --line-bytes=SIZE put at most SIZE bytes of lines per output file\n" " -l, --lines=NUMBER put NUMBER lines per output file\n" " -NUMBER same as -l NUMBER\n" " --verbose print a diagnostic to standard error just\n" " before each output file is opened\n" " --help display this help and exit\n" " --version output version information and exit\n" "\n" "SIZE may have a multiplier suffix: b for 512, k for 1K, m for 1 Meg.\n" msgstr "" #: src/split.c:158 #, c-format msgid "creating file `%s'\n" msgstr "" #: src/split.c:377 src/split.c:393 src/split.c:409 src/split.c:435 msgid "cannot split in more than one way" msgstr "" #: src/split.c:384 src/split.c:417 #, c-format msgid "%s: invalid number of bytes" msgstr "" #: src/split.c:400 #, c-format msgid "%s: invalid number of lines" msgstr "" #: src/split.c:467 msgid "invalid number" msgstr "" #: src/split.c:482 src/tr.c:1833 src/uniq.c:456 msgid "too many arguments" msgstr "" #: src/sum.c:66 msgid "" "Print checksum and block counts for each FILE.\n" "\n" " -r defeat -s, use BSD sum algorithm, use 1K blocks\n" " -s, --sysv use System V sum algorithm, use 512 bytes blocks\n" " --help display this help and exit\n" " --version output version information and exit\n" "\n" "With no FILE, or when FILE is -, read standard input.\n" msgstr "" #: src/tac.c:131 msgid "" "Write each FILE to standard output, last line first.\n" "With no FILE, or when FILE is -, read standard input.\n" "\n" " -b, --before attach the separator before instead of after\n" " -r, --regex interpret the separator as a regular expression\n" " -s, --separator=STRING use STRING as the separator instead of newline\n" " --help display this help and exit\n" " --version output version information and exit\n" msgstr "" #: src/tac.c:449 src/tac.c:590 msgid "stdin: read error" msgstr "" #: src/tac.c:636 msgid "separator cannot be empty" msgstr "" #: src/tail.c:240 #, c-format msgid "" "Print the last %d lines of each FILE to standard output.\n" "With more than one FILE, precede each with a header giving the file name.\n" "With no FILE, or when FILE is -, read standard input.\n" "\n" " --retry keep trying to open a file even if it is\n" " inaccessible when tail starts or if it becomes\n" " inaccessible later -- useful only with -f\n" " -c, --bytes=N output the last N bytes\n" " -f, --follow[={name|descriptor}] output appended data as the file grows;\n" " -f, --follow, and --follow=descriptor are\n" " equivalent\n" " -n, --lines=N output the last N lines, instead of the last %d\n" " --max-unchanged-stats=N\n" " with --follow=name, reopen a FILE which has not\n" " changed size after N (default %d) iterations\n" " to see if it has been unlinked or renamed\n" " (this is the usual case of rotated log files)\n" " --pid=PID with -f, terminate after process ID, PID dies\n" " -q, --quiet, --silent never output headers giving file names\n" " -s, --sleep-interval=S with -f, each iteration lasts approximately S\n" " (default 1) seconds\n" " -v, --verbose always output headers giving file names\n" " --help display this help and exit\n" " --version output version information and exit\n" "\n" msgstr "" #: src/tail.c:270 msgid "" "If the first character of N (the number of bytes or lines) is a `+',\n" "print beginning with the Nth item from the start of each file, otherwise,\n" "print the last N items in the file. N may have a multiplier suffix:\n" "b for 512, k for 1024, m for 1048576 (1 Meg). A first OPTION of -VALUE\n" "or +VALUE is treated like -n VALUE or -n +VALUE unless VALUE has one of\n" "the [bkm] suffix multipliers, in which case it is treated like -c VALUE\n" "or -c +VALUE. Warning: a first option of +VALUE is obsolescent, and support\n" "for it will be withdrawn.\n" "\n" "With --follow (-f), tail defaults to following the file descriptor, which\n" "means that even if a tail'ed file is renamed, tail will continue to track\n" "its end. This default behavior is not desirable when you really want to\n" "track the actual name of the file, not the file descriptor (e.g., log\n" "rotation). Use --follow=name in that case. That causes tail to track the\n" "named file by reopening it periodically to see if it has been removed and\n" "recreated by some other program.\n" "\n" msgstr "" #: src/tail.c:321 #, c-format msgid "closing %s (fd=%d)" msgstr "" #. FIXME-maybe: detect the case in which the file first becomes #. unreadable (perms), and later becomes readable again and can #. be seen to be the same file (dev/ino). Otherwise, tail prints #. the entire contents of the file when it becomes readable. #: src/tail.c:751 #, c-format msgid "`%s' has become inaccessible" msgstr "" #: src/tail.c:768 #, c-format msgid "`%s' has been replaced with an untailable file; giving up on this name" msgstr "" #: src/tail.c:789 #, c-format msgid "`%s' has become accessible" msgstr "" #: src/tail.c:797 #, c-format msgid "`%s' has appeared; following end of new file" msgstr "" #: src/tail.c:808 #, c-format msgid "`%s' has been replaced; following end of new file" msgstr "" #: src/tail.c:936 #, c-format msgid "%s: file truncated" msgstr "" #: src/tail.c:956 msgid "no files remaining" msgstr "" #: src/tail.c:1167 #, c-format msgid "%s: cannot follow end of this type of file; giving up on this name" msgstr "" #: src/tail.c:1282 #, c-format msgid "%c: invalid suffix character in obsolescent option" msgstr "" #: src/tail.c:1331 #, c-format msgid "" "too many arguments; When using tail's obsolescent option syntax (%s)\n" "there may be no more than one file argument. Use the equivalent -n or -c\n" "option instead." msgstr "" #: src/tail.c:1340 #, c-format msgid "" "Warning: it is not portable to use two or more file arguments with\n" "tail's obsolescent option syntax (%s). Use the equivalent -n or -c\n" "option instead." msgstr "" #: src/tail.c:1395 #, c-format msgid "%s: is so large that it is not representable" msgstr "" #: src/tail.c:1425 #, c-format msgid "%s: invalid maximum number of unchanged stats between opens" msgstr "" #: src/tail.c:1437 #, c-format msgid "%s: invalid maximum number of consecutive size changes" msgstr "" #: src/tail.c:1449 #, c-format msgid "%s: invalid PID" msgstr "" #: src/tail.c:1467 #, c-format msgid "%s: invalid number of seconds" msgstr "" #: src/tail.c:1487 msgid "warning: --retry is useful only when following by name" msgstr "" #: src/tail.c:1491 msgid "warning: PID ignored; --pid=PID is useful only when following" msgstr "" #: src/tail.c:1494 msgid "warning: --pid=PID is not supported on this system" msgstr "" #: src/tr.c:327 #, c-format msgid "Usage: %s [OPTION]... SET1 [SET2]\n" msgstr "" #: src/tr.c:331 msgid "" "Translate, squeeze, and/or delete characters from standard input,\n" "writing to standard output.\n" "\n" " -c, --complement first complement SET1\n" " -d, --delete delete characters in SET1, do not translate\n" " -s, --squeeze-repeats replace sequence of characters with one\n" " -t, --truncate-set1 first truncate SET1 to length of SET2\n" " --help display this help and exit\n" " --version output version information and exit\n" msgstr "" #: src/tr.c:342 msgid "" "\n" "SETs are specified as strings of characters. Most represent themselves.\n" "Interpreted sequences are:\n" "\n" " \\NNN character with octal value NNN (1 to 3 octal digits)\n" " \\\\ backslash\n" " \\a audible BEL\n" " \\b backspace\n" " \\f form feed\n" " \\n new line\n" " \\r return\n" " \\t horizontal tab\n" " \\v vertical tab\n" " CHAR1-CHAR2 all characters from CHAR1 to CHAR2 in ascending order\n" " [CHAR*] in SET2, copies of CHAR until length of SET1\n" " [CHAR*REPEAT] REPEAT copies of CHAR, REPEAT octal if starting with 0\n" " [:alnum:] all letters and digits\n" " [:alpha:] all letters\n" " [:blank:] all horizontal whitespace\n" " [:cntrl:] all control characters\n" " [:digit:] all digits\n" " [:graph:] all printable characters, not including space\n" " [:lower:] all lower case letters\n" " [:print:] all printable characters, including space\n" " [:punct:] all punctuation characters\n" " [:space:] all horizontal or vertical whitespace\n" " [:upper:] all upper case letters\n" " [:xdigit:] all hexadecimal digits\n" " [=CHAR=] all characters which are equivalent to CHAR\n" msgstr "" #: src/tr.c:373 msgid "" "\n" "Translation occurs if -d is not given and both SET1 and SET2 appear.\n" "-t may be used only when translating. SET2 is extended to length of\n" "SET1 by repeating its last character as necessary. Excess characters\n" "of SET2 are ignored. Only [:lower:] and [:upper:] are guaranteed to\n" "expand in ascending order; used in SET2 while translating, they may\n" "only be used in pairs to specify case conversion. -s uses SET1 if not\n" "translating nor deleting; else squeezing uses SET2 and occurs after\n" "translation or deletion.\n" msgstr "" #. Any octal number larger than 0377 won't #. fit in 8 bits. So we stop when adding the #. next digit would put us over the limit and #. give a warning about the ambiguity. POSIX #. isn't clear on this, but one person has said #. that in his interpretation, POSIX says tr #. can't even give a warning. #: src/tr.c:545 #, c-format msgid "" "warning: the ambiguous octal escape \\%c%c%c is being\n" "\tinterpreted as the 2-byte sequence \\0%c%c, `%c'" msgstr "" #: src/tr.c:554 msgid "invalid backslash escape at end of string" msgstr "" #: src/tr.c:560 #, c-format msgid "invalid backslash escape `\\%c'" msgstr "" #: src/tr.c:713 #, c-format msgid "range-endpoints of `%s-%s' are in reverse collating sequence order" msgstr "" #: src/tr.c:901 #, c-format msgid "invalid repeat count `%s' in [c*n] construct" msgstr "" #: src/tr.c:1009 #, c-format msgid "invalid character class `%s'" msgstr "" #: src/tr.c:1034 #, c-format msgid "%s: equivalence class operand must be a single character" msgstr "" #: src/tr.c:1506 msgid "the [c*] repeat construct may not appear in string1" msgstr "" #: src/tr.c:1516 msgid "only one [c*] repeat construct may appear in string2" msgstr "" #: src/tr.c:1524 msgid "[=c=] expressions may not appear in string2 when translating" msgstr "" #: src/tr.c:1537 msgid "when not truncating set1, string2 must be non-empty" msgstr "" #: src/tr.c:1546 msgid "" "when translating with complemented character classes,\n" "string2 must map all characters in the domain to one" msgstr "" #: src/tr.c:1553 msgid "" "when translating, the only character classes that may appear in\n" "string2 are `upper' and `lower'" msgstr "" #: src/tr.c:1562 msgid "the [c*] construct may appear in string2 only when translating" msgstr "" #: src/tr.c:1838 msgid "two strings must be given when translating" msgstr "" #: src/tr.c:1841 msgid "two strings must be given when both deleting and squeezing repeats" msgstr "" #: src/tr.c:1855 msgid "only one string may be given when deleting without squeezing repeats" msgstr "" #: src/tr.c:1861 msgid "at least one string must be given when squeezing repeats" msgstr "" #: src/tr.c:1952 msgid "misaligned [:upper:] and/or [:lower:] construct" msgstr "" #: src/tr.c:1975 msgid "" "invalid identity mapping; when translating, any [:lower:] or [:upper:]\n" "construct in string1 must be aligned with a corresponding construct\n" "([:upper:] or [:lower:], respectively) in string2" msgstr "" #: src/tsort.c:97 #, c-format msgid "" "Usage: %s [OPTION] [FILE]\n" "Write totally ordered list consistent with the partial ordering in FILE.\n" "With no FILE, or when FILE is -, read standard input.\n" "\n" " --help display this help and exit\n" " --version output version information and exit\n" msgstr "" #. The input contains a loop. #: src/tsort.c:533 #, c-format msgid "%s: input contains a loop:" msgstr "" #: src/tsort.c:575 msgid "only one argument may be specified" msgstr "" #: src/unexpand.c:379 msgid "" "Convert spaces in each FILE to tabs, writing to standard output.\n" "With no FILE, or when FILE is -, read standard input.\n" "\n" " -a, --all convert all whitespace, instead of initial whitespace\n" " -t, --tabs=NUMBER have tabs NUMBER characters apart instead of 8\n" " -t, --tabs=LIST use comma separated list of explicit tab positions\n" " --help display this help and exit\n" " --version output version information and exit\n" "\n" "Instead of -t NUMBER or -t LIST, -NUMBER or -LIST may be used.\n" msgstr "" #: src/uniq.c:107 #, c-format msgid "Usage: %s [OPTION]... [INPUT [OUTPUT]]\n" msgstr "" #: src/uniq.c:111 msgid "" "Discard all but one of successive identical lines from INPUT (or\n" "standard input), writing to OUTPUT (or standard output).\n" "\n" " -c, --count prefix lines by the number of occurrences\n" " -d, --repeated only print duplicate lines\n" " -D, --all-repeated print all duplicate lines\n" " -f, --skip-fields=N avoid comparing the first N fields\n" " -i, --ignore-case ignore differences in case when comparing\n" " -s, --skip-chars=N avoid comparing the first N characters\n" " -u, --unique only print unique lines\n" " -w, --check-chars=N compare no more than N characters in lines\n" " -N same as -f N\n" " +N same as -s N (obsolescent; will be withdrawn)\n" " --help display this help and exit\n" " --version output version information and exit\n" "\n" "A field is a run of whitespace, then non-whitespace characters.\n" "Fields are skipped before chars.\n" msgstr "" #: src/uniq.c:315 #, c-format msgid "error reading %s" msgstr "" #: src/uniq.c:320 #, c-format msgid "error writing %s" msgstr "" #: src/uniq.c:384 #, c-format msgid "invalid number of fields to skip: `%s'" msgstr "" #: src/uniq.c:400 src/uniq.c:442 #, c-format msgid "invalid number of bytes to skip: `%s'" msgstr "" #: src/uniq.c:416 #, c-format msgid "invalid number of bytes to compare: `%s'" msgstr "" #: src/uniq.c:463 msgid "printing all duplicated lines and repeat counts is meaningless" msgstr "" #: src/wc.c:128 msgid "" "Print newline, word, and byte counts for each FILE, and a total line if\n" "more than one FILE is specified. With no FILE, or when FILE is -,\n" "read standard input.\n" " -c, --bytes print the byte counts\n" " -m, --chars print the character counts\n" " -l, --lines print the newline counts\n" " -L, --max-line-length print the length of the longest line\n" " -w, --words print the word counts\n" " --help display this help and exit\n" " --version output version information and exit\n" msgstr "" #: src/wc.c:579 msgid "total" msgstr ""