# SOME DESCRIPTIVE TITLE. # Copyright (C) YEAR Free Software Foundation, Inc. # FIRST AUTHOR , YEAR. # #, fuzzy msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "POT-Creation-Date: 2002-01-22 19:18+0100\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=CHARSET\n" "Content-Transfer-Encoding: 8bit\n" #: lib/argmatch.c:161 #, c-format msgid "invalid argument %s for %s" msgstr "" #: lib/argmatch.c:162 #, c-format msgid "ambiguous argument %s for %s" msgstr "" #. We try to put synonyms on the same line. The assumption is that #. synonyms follow each other #: lib/argmatch.c:181 msgid "Valid arguments are:" msgstr "" #: lib/closeout.c:107 src/cat.c:186 src/cat.c:267 src/cat.c:320 #: src/cksum.c:267 src/head.c:150 src/head.c:180 src/tail.c:337 #: src/tail.c:1646 src/tr.c:1665 src/tr.c:1911 src/tr.c:2019 msgid "write error" msgstr "" #: lib/error.c:129 lib/error.c:157 msgid "Unknown system error" msgstr "" #: lib/getopt.c:694 #, c-format msgid "%s: option `%s' is ambiguous\n" msgstr "" #: lib/getopt.c:719 #, c-format msgid "%s: option `--%s' doesn't allow an argument\n" msgstr "" #: lib/getopt.c:724 #, c-format msgid "%s: option `%c%s' doesn't allow an argument\n" msgstr "" #: lib/getopt.c:742 lib/getopt.c:915 #, c-format msgid "%s: option `%s' requires an argument\n" msgstr "" #. --option #: lib/getopt.c:771 #, c-format msgid "%s: unrecognized option `--%s'\n" msgstr "" #. +option or -option #: lib/getopt.c:775 #, c-format msgid "%s: unrecognized option `%c%s'\n" msgstr "" #. 1003.2 specifies the format of this message. #: lib/getopt.c:801 #, c-format msgid "%s: illegal option -- %c\n" msgstr "" #: lib/getopt.c:804 #, c-format msgid "%s: invalid option -- %c\n" msgstr "" #. 1003.2 specifies the format of this message. #: lib/getopt.c:834 lib/getopt.c:964 #, c-format msgid "%s: option requires an argument -- %c\n" msgstr "" #: lib/getopt.c:881 #, c-format msgid "%s: option `-W %s' is ambiguous\n" msgstr "" #: lib/getopt.c:899 #, c-format msgid "%s: option `-W %s' doesn't allow an argument\n" msgstr "" #: lib/human.c:365 msgid "block size" msgstr "" #: lib/makepath.c:176 #, c-format msgid "cannot create directory %s" msgstr "" #: lib/makepath.c:182 lib/makepath.c:423 #, c-format msgid "%s exists but is not a directory" msgstr "" #: lib/makepath.c:319 lib/makepath.c:381 lib/makepath.c:442 #, c-format msgid "cannot change owner and/or group of %s" msgstr "" #: lib/makepath.c:341 #, c-format msgid "cannot chdir to directory, %s" msgstr "" #: lib/makepath.c:395 lib/makepath.c:448 #, c-format msgid "cannot change permissions of %s" msgstr "" #. If XALLOC_FAIL_FUNC is NULL, or does return, display this message #. before exiting when memory is exhausted. Goes through gettext. #: lib/obstack.c:494 lib/obstack.c:497 lib/xmalloc.c:66 msgid "memory exhausted" msgstr "" #. Get translations for open and closing quotation marks. #. #. The message catalog should translate "`" to a left #. quotation mark suitable for the locale, and similarly for #. "'". If the catalog has no translation, #. locale_quoting_style quotes `like this', and #. clocale_quoting_style quotes "like this". #. #. For example, an American English Unicode locale should #. translate "`" to U+201C (LEFT DOUBLE QUOTATION MARK), and #. should translate "'" to U+201D (RIGHT DOUBLE QUOTATION #. MARK). A British English Unicode locale should instead #. translate these to U+2018 (LEFT SINGLE QUOTATION MARK) and #. U+2019 (RIGHT SINGLE QUOTATION MARK), respectively. #: lib/quotearg.c:270 msgid "`" msgstr "" #: lib/quotearg.c:271 msgid "'" msgstr "" #: lib/rpmatch.c:78 msgid "^[yY]" msgstr "" #: lib/rpmatch.c:81 msgid "^[nN]" msgstr "" #: lib/unicodeio.c:138 #, c-format msgid "cannot output U+%04X: iconv function not usable" msgstr "" #: lib/unicodeio.c:149 #, c-format msgid "U+%04X: character out of range" msgstr "" #: lib/unicodeio.c:181 lib/unicodeio.c:190 #, c-format msgid "cannot convert U+%04X to local character set" msgstr "" #: lib/unicodeio.c:196 #, c-format msgid "cannot output U+%04X: iconv function not available" msgstr "" #: lib/userspec.c:178 msgid "invalid user" msgstr "" #: lib/userspec.c:179 msgid "invalid group" msgstr "" #: lib/userspec.c:181 msgid "cannot get the login group of a numeric UID" msgstr "" #: lib/userspec.c:183 msgid "cannot omit both user and group" msgstr "" #: lib/version-etc.c:61 #, c-format msgid "Written by %s.\n" msgstr "" #: lib/version-etc.c:67 msgid "" "This is free software; see the source for copying conditions. There is NO\n" "warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.\n" msgstr "" #: lib/xmemcoll.c:61 msgid "string comparison failed" msgstr "" #: lib/xmemcoll.c:62 msgid "Set LC_ALL='C' to work around the problem." msgstr "" #: lib/xmemcoll.c:64 #, c-format msgid "The strings compared were %s and %s." msgstr "" #. The official name of this program (e.g., no `g' prefix). #: src/cat.c:42 src/split.c:40 msgid "Torbjorn Granlund and Richard M. Stallman" msgstr "" #: src/cat.c:88 src/cksum.c:276 src/comm.c:71 src/csplit.c:1490 src/cut.c:163 #: src/expand.c:105 src/fmt.c:267 src/fold.c:62 src/head.c:80 src/join.c:142 #: src/md5sum.c:121 src/nl.c:172 src/od.c:270 src/paste.c:399 src/pr.c:2746 #: src/ptx.c:1855 src/sort.c:280 src/split.c:83 src/sum.c:56 src/tac.c:123 #: src/tail.c:233 src/tr.c:323 src/tsort.c:93 src/unexpand.c:371 #: src/uniq.c:129 src/wc.c:124 #, c-format msgid "Try `%s --help' for more information.\n" msgstr "" #: src/cat.c:92 #, c-format msgid "Usage: %s [OPTION] [FILE]...\n" msgstr "" #: src/cat.c:96 msgid "" "Concatenate FILE(s), or standard input, to standard output.\n" "\n" " -A, --show-all equivalent to -vET\n" " -b, --number-nonblank number nonblank output lines\n" " -e equivalent to -vE\n" " -E, --show-ends display $ at end of each line\n" " -n, --number number all output lines\n" " -s, --squeeze-blank never more than one single blank line\n" msgstr "" #: src/cat.c:106 msgid "" " -t equivalent to -vT\n" " -T, --show-tabs display TAB characters as ^I\n" " -u (ignored)\n" " -v, --show-nonprinting use ^ and M- notation, except for LFD and TAB\n" msgstr "" #: src/cat.c:114 src/sum.c:72 msgid "\nWith no FILE, or when FILE is -, read standard input.\n" msgstr "" #: src/cat.c:119 msgid "\n -B, --binary use binary writes to the console device.\n\n" msgstr "" #. FIXME: add a couple of examples. #: src/cat.c:124 src/cksum.c:291 src/comm.c:88 src/csplit.c:1532 src/cut.c:208 #: src/expand.c:134 src/fmt.c:297 src/fold.c:85 src/head.c:113 src/join.c:182 #: src/md5sum.c:157 src/nl.c:227 src/od.c:357 src/paste.c:423 src/pr.c:2857 #: src/sort.c:356 src/split.c:113 src/sum.c:76 src/tac.c:146 src/tail.c:314 #: src/tr.c:394 src/tsort.c:105 src/unexpand.c:398 src/uniq.c:173 src/wc.c:146 msgid "\nReport bugs to ." msgstr "" #: src/cat.c:308 #, c-format msgid "cannot do ioctl on `%s'" msgstr "" #: src/cat.c:648 src/od.c:997 msgid "standard output" msgstr "" #: src/cat.c:779 #, c-format msgid "%s: input file is output file" msgstr "" #: src/cksum.c:234 #, c-format msgid "%s: file too long" msgstr "" #: src/cksum.c:280 #, c-format msgid "" "Usage: %s [FILE]...\n" " or: %s [OPTION]\n" msgstr "" #: src/cksum.c:285 msgid "Print CRC checksum and byte counts of each FILE.\n\n" msgstr "" #. The official name of this program (e.g., no `g' prefix). #: src/comm.c:35 src/uniq.c:37 msgid "Richard Stallman and David MacKenzie" msgstr "" #: src/comm.c:75 #, c-format msgid "Usage: %s [OPTION]... LEFT_FILE RIGHT_FILE\n" msgstr "" #: src/comm.c:79 msgid "" "Compare sorted files LEFT_FILE and RIGHT_FILE line by line.\n" "\n" " -1 suppress lines unique to left file\n" " -2 suppress lines unique to right file\n" " -3 suppress lines that appear in both files\n" msgstr "" #. The official name of this program (e.g., no `g' prefix). #: src/csplit.c:41 msgid "Stuart Kemp and David MacKenzie" msgstr "" #: src/csplit.c:290 src/csplit.c:1479 src/tac-pipe.c:57 src/tr.c:1607 #: src/tr.c:1710 src/tr.c:1753 msgid "read error" msgstr "" #: src/csplit.c:584 msgid "input disappeared" msgstr "" #: src/csplit.c:706 src/csplit.c:717 #, c-format msgid "%s: line number out of range" msgstr "" #: src/csplit.c:744 #, c-format msgid "%s: `%s': line number out of range" msgstr "" #: src/csplit.c:747 src/csplit.c:793 #, c-format msgid " on repetition %d\n" msgstr "" #: src/csplit.c:789 #, c-format msgid "%s: `%s': match not found" msgstr "" #: src/csplit.c:850 src/csplit.c:890 src/tac.c:262 msgid "error in regular expression search" msgstr "" #: src/csplit.c:993 #, c-format msgid "write error for `%s'" msgstr "" #: src/csplit.c:1065 #, c-format msgid "%s: `+' or `-' expected after delimeter" msgstr "" #: src/csplit.c:1069 #, c-format msgid "%s: integer expected after `%c'" msgstr "" #: src/csplit.c:1089 #, c-format msgid "%s: `}' is required in repeat count" msgstr "" #: src/csplit.c:1099 #, c-format msgid "%s}: integer required between `{' and `}'" msgstr "" #: src/csplit.c:1126 #, c-format msgid "%s: closing delimeter `%c' missing" msgstr "" #: src/csplit.c:1142 #, c-format msgid "%s: invalid regular expression: %s" msgstr "" #: src/csplit.c:1175 #, c-format msgid "%s: invalid pattern" msgstr "" #: src/csplit.c:1178 #, c-format msgid "%s: line number must be greater than zero" msgstr "" #: src/csplit.c:1184 #, c-format msgid "line number `%s' is smaller than preceding line number, %s" msgstr "" #: src/csplit.c:1190 #, c-format msgid "warning: line number `%s' is the same as preceding line number" msgstr "" #: src/csplit.c:1312 msgid "missing conversion specifier in suffix" msgstr "" #: src/csplit.c:1318 #, c-format msgid "invalid conversion specifier in suffix: %c" msgstr "" #: src/csplit.c:1321 #, c-format msgid "invalid conversion specifier in suffix: \\%.3o" msgstr "" #: src/csplit.c:1353 #, c-format msgid "missing %% conversion specification in suffix" msgstr "" #: src/csplit.c:1356 #, c-format msgid "too many %% conversion specifications in suffix" msgstr "" #: src/csplit.c:1439 #, c-format msgid "%s: invalid number" msgstr "" #: src/csplit.c:1462 msgid "too few arguments" msgstr "" #: src/csplit.c:1494 #, c-format msgid "Usage: %s [OPTION]... FILE PATTERN...\n" msgstr "" #: src/csplit.c:1498 msgid "" "Output pieces of FILE separated by PATTERN(s) to files `xx01', `xx02', ...,\n" "and output byte counts of each piece to standard output.\n" "\n" msgstr "" #: src/csplit.c:1503 src/cut.c:175 src/expand.c:118 src/fmt.c:277 #: src/fold.c:75 src/head.c:94 src/nl.c:185 src/od.c:286 src/paste.c:413 #: src/pr.c:2759 src/ptx.c:1867 src/sort.c:294 src/split.c:96 src/tac.c:136 #: src/tail.c:247 src/unexpand.c:384 src/uniq.c:142 msgid "Mandatory arguments to long options are mandatory for short options too.\n" msgstr "" #: src/csplit.c:1506 #, c-format msgid "" " -b, --suffix-format=FORMAT use sprintf FORMAT instead of %d\n" " -f, --prefix=PREFIX use PREFIX instead of `xx'\n" " -k, --keep-files do not remove output files on errors\n" msgstr "" #: src/csplit.c:1511 msgid "" " -n, --digits=DIGITS use specified number of digits instead of 2\n" " -s, --quiet, --silent do not print counts of output file sizes\n" " -z, --elide-empty-files remove empty output files\n" msgstr "" #: src/csplit.c:1518 msgid "\nRead standard input if FILE is -. Each PATTERN may be:\n" msgstr "" #: src/csplit.c:1522 msgid "" "\n" " INTEGER copy up to but not including specified line number\n" " /REGEXP/[OFFSET] copy up to but not including a matching line\n" " %REGEXP%[OFFSET] skip to, but not including a matching line\n" " {INTEGER} repeat the previous pattern specified number of times\n" " {*} repeat the previous pattern as many times as possible\n" "\n" "A line OFFSET is a required `+' or `-' followed by a positive integer.\n" msgstr "" #. The official name of this program (e.g., no `g' prefix). #: src/cut.c:39 msgid "David Ihnat, David MacKenzie, and Jim Meyering" msgstr "" #: src/cut.c:167 src/expand.c:109 src/fold.c:66 src/head.c:84 src/nl.c:176 #: src/paste.c:403 src/pr.c:2750 src/sort.c:284 src/sum.c:60 src/tac.c:127 #: src/tail.c:237 src/unexpand.c:375 src/wc.c:128 #, c-format msgid "Usage: %s [OPTION]... [FILE]...\n" msgstr "" #: src/cut.c:171 msgid "Print selected parts of lines from each FILE to standard output.\n\n" msgstr "" #: src/cut.c:178 msgid "" " -b, --bytes=LIST output only these bytes\n" " -c, --characters=LIST output only these characters\n" " -d, --delimiter=DELIM use DELIM instead of TAB for field delimiter\n" msgstr "" #: src/cut.c:183 msgid "" " -f, --fields=LIST output only these fields; also print any line\n" " that contains no delimiter character, unless\n" " the -s option is specified\n" " -n (ignored)\n" msgstr "" #: src/cut.c:189 msgid "" " -s, --only-delimited do not print lines not containing delimiters\n" " --output-delimiter=STRING use STRING as the output delimiter\n" " the default is to use the input delimiter\n" msgstr "" #: src/cut.c:196 msgid "" "\n" "Use one, and only one of -b, -c or -f. Each LIST is made up of one\n" "range, or many ranges separated by commas. Each range is one of:\n" "\n" " N N'th byte, character or field, counted from 1\n" " N- from N'th byte, character or field, to end of line\n" " N-M from N'th to M'th (included) byte, character or field\n" " -M from first to M'th (included) byte, character or field\n" "\n" "With no FILE, or when FILE is -, read standard input.\n" msgstr "" #: src/cut.c:263 src/cut.c:294 src/cut.c:354 msgid "invalid byte or field list" msgstr "" #: src/cut.c:624 src/cut.c:633 msgid "only one type of list may be specified" msgstr "" #: src/cut.c:627 msgid "missing list of positions" msgstr "" #: src/cut.c:636 msgid "missing list of fields" msgstr "" #: src/cut.c:643 msgid "the delimiter must be a single character" msgstr "" #: src/cut.c:673 msgid "you must specify a list of bytes, characters, or fields" msgstr "" #: src/cut.c:676 msgid "a delimiter may be specified only when operating on fields" msgstr "" #: src/cut.c:679 msgid "" "suppressing non-delimited lines makes sense\n" "\tonly when operating on fields" msgstr "" #: src/expand.c:113 msgid "" "Convert tabs in each FILE to spaces, writing to standard output.\n" "With no FILE, or when FILE is -, read standard input.\n" "\n" msgstr "" #: src/expand.c:121 msgid "" " -i, --initial do not convert TABs after non whitespace\n" " -t, --tabs=NUMBER have tabs NUMBER characters apart, not 8\n" msgstr "" #: src/expand.c:125 msgid " -t, --tabs=LIST use comma separated list of explicit tab positions\n" msgstr "" #: src/expand.c:130 src/unexpand.c:394 msgid "\nInstead of -t NUMBER or -t LIST, -NUMBER or -LIST may be used.\n" msgstr "" #: src/expand.c:176 src/unexpand.c:153 msgid "tab size contains an invalid character" msgstr "" #: src/expand.c:194 src/unexpand.c:171 msgid "tab size cannot be 0" msgstr "" #: src/expand.c:196 src/unexpand.c:173 msgid "tab sizes must be ascending" msgstr "" #: src/fmt.c:271 #, c-format msgid "Usage: %s [-DIGITS] [OPTION]... [FILE]...\n" msgstr "" #: src/fmt.c:272 msgid "" "Reformat each paragraph in the FILE(s), writing to standard output.\n" "If no FILE or if FILE is `-', read standard input.\n" "\n" msgstr "" #: src/fmt.c:280 msgid "" " -c, --crown-margin preserve indentation of first two lines\n" " -p, --prefix=STRING combine only lines having STRING as prefix\n" " -s, --split-only split long lines, but do not refill\n" msgstr "" #: src/fmt.c:286 msgid "" " -t, --tagged-paragraph indentation of first line different from second\n" " -u, --uniform-spacing one space between words, two after sentences\n" " -w, --width=NUMBER maximum line width (default of 75 columns)\n" msgstr "" #: src/fmt.c:293 msgid "\nIn -wNUMBER, the letter `w' may be omitted.\n" msgstr "" #: src/fmt.c:345 #, c-format msgid "invalid width option: `%s'" msgstr "" #: src/fmt.c:385 #, c-format msgid "invalid width: `%s'" msgstr "" #: src/fold.c:70 msgid "" "Wrap input lines in each FILE (standard input by default), writing to\n" "standard output.\n" "\n" msgstr "" #: src/fold.c:78 msgid "" " -b, --bytes count bytes rather than columns\n" " -s, --spaces break at spaces\n" " -w, --width=WIDTH use WIDTH columns instead of 80\n" msgstr "" #: src/fold.c:285 #, c-format msgid "invalid number of columns: `%s'" msgstr "" #: src/head.c:88 msgid "" "Print first 10 lines of each FILE to standard output.\n" "With more than one FILE, precede each with a header giving the file name.\n" "With no FILE, or when FILE is -, read standard input.\n" "\n" msgstr "" #: src/head.c:97 msgid "" " -c, --bytes=SIZE print first SIZE bytes\n" " -n, --lines=NUMBER print first NUMBER lines instead of first 10\n" msgstr "" #: src/head.c:101 msgid "" " -q, --quiet, --silent never print headers giving file names\n" " -v, --verbose always print headers giving file names\n" msgstr "" #: src/head.c:107 msgid "" "\n" "SIZE may have a multiplier suffix: b for 512, k for 1K, m for 1 Meg.\n" "If -VALUE is used as first OPTION, read -c VALUE when one of\n" "multipliers bkm follows concatenated, else read -n VALUE.\n" msgstr "" #: src/head.c:205 src/md5sum.c:334 src/md5sum.c:674 src/od.c:943 src/od.c:1970 #: src/pr.c:1160 src/pr.c:1367 src/pr.c:1489 src/tac.c:484 src/tac.c:490 #: src/tr.c:2026 src/tsort.c:585 msgid "standard input" msgstr "" #: src/head.c:240 src/tail.c:1373 #, c-format msgid "%s: %s is so large that it is not representable" msgstr "" #: src/head.c:241 src/tail.c:1375 msgid "number of lines" msgstr "" #: src/head.c:241 src/tail.c:1376 msgid "number of bytes" msgstr "" #: src/head.c:248 src/tail.c:1461 msgid "invalid number of lines" msgstr "" #: src/head.c:249 src/tail.c:1462 msgid "invalid number of bytes" msgstr "" #: src/head.c:328 #, c-format msgid "unrecognized option `-%c'" msgstr "" #: src/join.c:146 #, c-format msgid "Usage: %s [OPTION]... FILE1 FILE2\n" msgstr "" #: src/join.c:150 msgid "" "For each pair of input lines with identical join fields, write a line to\n" "standard output. The default join field is the first, delimited\n" "by whitespace. When FILE1 or FILE2 (not both) is -, read standard input.\n" "\n" " -a SIDE print unpairable lines coming from file SIDE\n" " -e EMPTY replace missing input fields with EMPTY\n" msgstr "" #: src/join.c:158 msgid "" " -i, --ignore-case ignore differences in case when comparing fields\n" " -j FIELD (obsolescent) equivalent to `-1 FIELD -2 FIELD'\n" " -j1 FIELD (obsolescent) equivalent to `-1 FIELD'\n" " -j2 FIELD (obsolescent) equivalent to `-2 FIELD'\n" " -o FORMAT obey FORMAT while constructing output line\n" " -t CHAR use CHAR as input and output field separator\n" msgstr "" #: src/join.c:166 msgid "" " -v SIDE like -a SIDE, but suppress joined output lines\n" " -1 FIELD join on this FIELD of file 1\n" " -2 FIELD join on this FIELD of file 2\n" msgstr "" #: src/join.c:173 msgid "" "\n" "Unless -t CHAR is given, leading blanks separate fields and are ignored,\n" "else fields are separated by CHAR. Any FIELD is a field number counted\n" "from 1. FORMAT is one or more comma or blank separated specifications,\n" "each being `SIDE.FIELD' or `0'. Default FORMAT outputs the join field,\n" "the remaining fields from FILE1, the remaining fields from FILE2, all\n" "separated by CHAR.\n" msgstr "" #. `0' must be all alone -- no `.FIELD'. #: src/join.c:648 #, c-format msgid "invalid field specifier: `%s'" msgstr "" #: src/join.c:662 src/join.c:778 src/join.c:814 #, c-format msgid "invalid field number: `%s'" msgstr "" #: src/join.c:675 #, c-format msgid "invalid file number in field spec: `%s'" msgstr "" #: src/join.c:798 #, c-format msgid "invalid field number for file 1: `%s'" msgstr "" #: src/join.c:807 #, c-format msgid "invalid field number for file 2: `%s'" msgstr "" #: src/join.c:839 msgid "too many non-option arguments" msgstr "" #: src/join.c:861 msgid "too few non-option arguments" msgstr "" #: src/join.c:872 msgid "both files cannot be standard input" msgstr "" #: src/md5sum.c:38 msgid "Ulrich Drepper and Scott Miller" msgstr "" #: src/md5sum.c:125 #, c-format msgid "" "Usage: %s [OPTION] [FILE]...\n" " or: %s [OPTION] --check [FILE]\n" "Print or check %s (%d-bit) checksums.\n" "With no FILE, or when FILE is -, read standard input.\n" msgstr "" #: src/md5sum.c:134 #, c-format msgid "" "\n" " -b, --binary read files in binary mode (default on DOS/Windows)\n" " -c, --check check %s sums against given list\n" " -t, --text read files in text mode (default)\n" "\n" msgstr "" #: src/md5sum.c:142 msgid "" "The following two options are useful only when verifying checksums:\n" " --status don't output anything, status code shows success\n" " -w, --warn warn about improperly formated checksum lines\n" "\n" msgstr "" #: src/md5sum.c:150 #, c-format msgid "" "\n" "The sums are computed as described in %s. When checking, the input\n" "should be a former output of this program. The default mode is to print\n" "a line with checksum, a character indicating type (`*' for binary, ` ' for\n" "text), and name for each FILE.\n" msgstr "" #: src/md5sum.c:379 #, c-format msgid "%s: %lu: improperly formatted %s checksum line" msgstr "" #: src/md5sum.c:401 #, c-format msgid "%s: FAILED open or read\n" msgstr "" #: src/md5sum.c:424 msgid "FAILED" msgstr "" #: src/md5sum.c:424 msgid "OK" msgstr "" #: src/md5sum.c:437 #, c-format msgid "%s: read error" msgstr "" #. Warn if no tests are found. #: src/md5sum.c:450 #, c-format msgid "%s: no properly formatted %s checksum lines found" msgstr "" #: src/md5sum.c:463 #, c-format msgid "WARNING: %d of %d listed %s could not be read" msgstr "" #: src/md5sum.c:466 msgid "file" msgstr "" #: src/md5sum.c:466 msgid "files" msgstr "" #: src/md5sum.c:472 #, c-format msgid "WARNING: %d of %d computed %s did NOT match" msgstr "" #: src/md5sum.c:475 msgid "checksum" msgstr "" #: src/md5sum.c:475 msgid "checksums" msgstr "" #: src/md5sum.c:557 msgid "the --binary and --text options are meaningless when verifying checksums" msgstr "" #: src/md5sum.c:565 msgid "the --string and --check options are mutually exclusive" msgstr "" #: src/md5sum.c:572 msgid "the --status option is meaningful only when verifying checksums" msgstr "" #: src/md5sum.c:579 msgid "the --warn option is meaningful only when verifying checksums" msgstr "" #: src/md5sum.c:589 msgid "no files may be specified when using --string" msgstr "" #: src/md5sum.c:611 msgid "only one argument may be specified when using --check" msgstr "" #. The official name of this program (e.g., no `g' prefix). #: src/nl.c:39 msgid "Scott Bartram and David MacKenzie" msgstr "" #: src/nl.c:180 msgid "" "Write each FILE to standard output, with line numbers added.\n" "With no FILE, or when FILE is -, read standard input.\n" "\n" msgstr "" #: src/nl.c:188 msgid "" " -b, --body-numbering=STYLE use STYLE for numbering body lines\n" " -d, --section-delimiter=CC use CC for separating logical pages\n" " -f, --footer-numbering=STYLE use STYLE for numbering footer lines\n" msgstr "" #: src/nl.c:193 msgid "" " -h, --header-numbering=STYLE use STYLE for numbering header lines\n" " -i, --page-increment=NUMBER line number increment at each line\n" " -l, --join-blank-lines=NUMBER group of NUMBER empty lines counted as one\n" " -n, --number-format=FORMAT insert line numbers according to FORMAT\n" " -p, --no-renumber do not reset line numbers at logical pages\n" " -s, --number-separator=STRING add STRING after (possible) line number\n" msgstr "" #: src/nl.c:201 msgid "" " -v, --first-page=NUMBER first line number on each logical page\n" " -w, --number-width=NUMBER use NUMBER columns for line numbers\n" msgstr "" #: src/nl.c:207 msgid "" "\n" "By default, selects -v1 -i1 -l1 -sTAB -w6 -nrn -hn -bt -fn. CC are\n" "two delimiter characters for separating logical pages, a missing\n" "second character implies :. Type \\\\ for \\. STYLE is one of:\n" msgstr "" #: src/nl.c:213 msgid "" "\n" " a number all lines\n" " t number only nonempty lines\n" " n number no lines\n" " pREGEXP number only lines that contain a match for REGEXP\n" "\n" "FORMAT is one of:\n" "\n" " ln left justified, no leading zeros\n" " rn right justified, no leading zeros\n" " rz right justified, leading zeros\n" "\n" msgstr "" #: src/nl.c:500 #, c-format msgid "invalid starting line number: `%s'" msgstr "" #: src/nl.c:510 #, c-format msgid "invalid line number increment: `%s'" msgstr "" #: src/nl.c:523 #, c-format msgid "invalid number of blank lines: `%s'" msgstr "" #: src/nl.c:537 #, c-format msgid "invalid line number field width: `%s'" msgstr "" #: src/od.c:274 #, c-format msgid "" "Usage: %s [OPTION]... [FILE]...\n" " or: %s --traditional [FILE] [[+]OFFSET [[+]LABEL]]\n" msgstr "" #: src/od.c:279 msgid "" "\n" "Write an unambiguous representation, octal bytes by default,\n" "of FILE to standard output. With more than one FILE argument,\n" "concatenate them in the listed order to form the input.\n" "With no FILE, or when FILE is -, read standard input.\n" "\n" msgstr "" #: src/od.c:289 msgid "" " -A, --address-radix=RADIX decide how file offsets are printed\n" " -j, --skip-bytes=BYTES skip BYTES input bytes first\n" msgstr "" #: src/od.c:293 msgid "" " -N, --read-bytes=BYTES limit dump to BYTES input bytes\n" " -s, --strings[=BYTES] output strings of at least BYTES graphic chars\n" " -t, --format=TYPE select output format or formats\n" " -v, --output-duplicates do not use * to mark line suppression\n" " -w, --width[=BYTES] output BYTES bytes per output line\n" " --traditional accept arguments in pre-POSIX form\n" msgstr "" #: src/od.c:303 msgid "" "\n" "Pre-POSIX format specifications may be intermixed, they accumulate:\n" " -a same as -t a, select named characters\n" " -b same as -t oC, select octal bytes\n" " -c same as -t c, select ASCII characters or backslash escapes\n" " -d same as -t u2, select unsigned decimal shorts\n" msgstr "" #: src/od.c:311 msgid "" " -f same as -t fF, select floats\n" " -h same as -t x2, select hexadecimal shorts\n" " -i same as -t d2, select decimal shorts\n" " -l same as -t d4, select decimal longs\n" " -o same as -t o2, select octal shorts\n" " -x same as -t x2, select hexadecimal shorts\n" msgstr "" #: src/od.c:319 msgid "" "\n" "For older syntax (second call format), OFFSET means -j OFFSET. LABEL\n" "is the pseudo-address at first byte printed, incremented when dump is\n" "progressing. For OFFSET and LABEL, a 0x or 0X prefix indicates\n" "hexadecimal, suffixes maybe . for octal and b multiply by 512.\n" "\n" "TYPE is made up of one or more of these specifications:\n" "\n" " a named character\n" " c ASCII character or backslash escape\n" msgstr "" #: src/od.c:331 msgid "" " d[SIZE] signed decimal, SIZE bytes per integer\n" " f[SIZE] floating point, SIZE bytes per integer\n" " o[SIZE] octal, SIZE bytes per integer\n" " u[SIZE] unsigned decimal, SIZE bytes per integer\n" " x[SIZE] hexadecimal, SIZE bytes per integer\n" msgstr "" #: src/od.c:338 msgid "" "\n" "SIZE is a number. For TYPE in doux, SIZE may also be C for\n" "sizeof(char), S for sizeof(short), I for sizeof(int) or L for\n" "sizeof(long). If TYPE is f, SIZE may also be F for sizeof(float), D\n" "for sizeof(double) or L for sizeof(long double).\n" msgstr "" #: src/od.c:345 msgid "" "\n" "RADIX is d for decimal, o for octal, x for hexadecimal or n for none.\n" "BYTES is hexadecimal with 0x or 0X prefix, it is multiplied by 512\n" "with b suffix, by 1024 with k and by 1048576 with m. Adding a z suffix to\n" "any type adds a display of printable characters to the end of each line\n" "of output. " msgstr "" #: src/od.c:353 msgid "" "-s without a number implies 3. -w without a number implies 32.\n" "By default, od uses -A o -t d2 -w 16.\n" msgstr "" #. The integer at P in S would overflow an unsigned long. #. A digit string that long is sufficiently odd looking #. that the following diagnostic is sufficient. #: src/od.c:709 src/od.c:828 #, c-format msgid "invalid type string `%s'" msgstr "" #: src/od.c:719 #, c-format msgid "" "invalid type string `%s';\n" "this system doesn't provide a %lu-byte integral type" msgstr "" #: src/od.c:838 #, c-format msgid "" "invalid type string `%s';\n" "this system doesn't provide a %lu-byte floating point type" msgstr "" #: src/od.c:901 #, c-format msgid "invalid character `%c' in type string `%s'" msgstr "" #: src/od.c:1128 msgid "cannot skip past end of combined input" msgstr "" #: src/od.c:1381 msgid "old-style offset" msgstr "" #: src/od.c:1686 #, c-format msgid "invalid output address radix `%c'; it must be one character from [doxn]" msgstr "" #: src/od.c:1696 msgid "skip argument" msgstr "" #: src/od.c:1704 msgid "limit argument" msgstr "" #: src/od.c:1714 msgid "minimum string length" msgstr "" #: src/od.c:1719 src/od.c:1778 #, c-format msgid "%s is too large" msgstr "" #: src/od.c:1776 msgid "width specification" msgstr "" #: src/od.c:1798 msgid "no type may be specified when dumping strings" msgstr "" #: src/od.c:1843 #, c-format msgid "invalid second operand in compatibility mode `%s'" msgstr "" #: src/od.c:1864 msgid "in compatibility mode, the last two arguments must be offsets" msgstr "" #: src/od.c:1871 msgid "compatibility mode supports at most three arguments" msgstr "" #: src/od.c:1944 #, c-format msgid "warning: invalid width %lu; using %d instead" msgstr "" #: src/od.c:1960 #, c-format msgid "%d: fmt=\"%s\" width=%d\n" msgstr "" #. The official name of this program (e.g., no `g' prefix). #: src/paste.c:50 msgid "David M. Ihnat and David MacKenzie" msgstr "" #: src/paste.c:208 msgid "standard input is closed" msgstr "" #: src/paste.c:407 msgid "" "Write lines consisting of the sequentially corresponding lines from\n" "each FILE, separated by TABs, to standard output.\n" "With no FILE, or when FILE is -, read standard input.\n" "\n" msgstr "" #: src/paste.c:416 msgid "" " -d, --delimiters=LIST reuse characters from LIST instead of TABs\n" " -s, --serial paste one file at a time instead of in parallel\n" msgstr "" #. The official name of this program (e.g., no `g' prefix). #: src/pr.c:326 msgid "Pete TerMaat and Roland Huebner" msgstr "" #: src/pr.c:800 #, c-format msgid "`--pages' invalid range of page numbers: `%s'" msgstr "" #: src/pr.c:812 #, c-format msgid "`--pages' invalid starting page number: `%s'" msgstr "" #: src/pr.c:824 #, c-format msgid "`--pages' invalid ending page number: `%s'" msgstr "" #: src/pr.c:831 msgid "`--pages' starting page number is larger than ending page number" msgstr "" #: src/pr.c:907 msgid "`--pages=FIRST_PAGE[:LAST_PAGE]' missing argument" msgstr "" #: src/pr.c:918 #, c-format msgid "`--columns=COLUMN' invalid number of columns: `%s'" msgstr "" #: src/pr.c:972 #, c-format msgid "`-l PAGE_LENGTH' invalid number of lines: `%s'" msgstr "" #: src/pr.c:996 #, c-format msgid "`-N NUMBER' invalid starting line number: `%s'" msgstr "" #: src/pr.c:1008 #, c-format msgid "`-o MARGIN' invalid line offset: `%s'" msgstr "" #: src/pr.c:1049 #, c-format msgid "`-w PAGE_WIDTH' invalid number of characters: `%s'" msgstr "" #: src/pr.c:1061 #, c-format msgid "`-W PAGE_WIDTH' invalid number of characters: `%s'" msgstr "" #: src/pr.c:1075 msgid "%b %e %H:%M %Y" msgstr "" #: src/pr.c:1084 msgid "Cannot specify number of columns when printing in parallel." msgstr "" #: src/pr.c:1088 msgid "Cannot specify both printing across and printing in parallel." msgstr "" #: src/pr.c:1184 #, c-format msgid "`-%c' extra characters or invalid number in the argument: `%s'" msgstr "" #: src/pr.c:1295 msgid "page width too narrow" msgstr "" #: src/pr.c:2358 #, c-format msgid "starting page number larger than total number of pages: `%d'" msgstr "" #. The translator must ensure that formatting the translation of #. "Page %d" does not generate more than (sizeof page_text - 1) #. bytes. #: src/pr.c:2389 #, c-format msgid "Page %d" msgstr "" #: src/pr.c:2755 msgid "Paginate or columnate FILE(s) for printing.\n\n" msgstr "" #: src/pr.c:2762 msgid "" " +FIRST_PAGE[:LAST_PAGE], --pages=FIRST_PAGE[:LAST_PAGE]\n" " begin [stop] printing with page FIRST_[LAST_]PAGE\n" " -COLUMN, --columns=COLUMN\n" " produce COLUMN-column output and print columns down,\n" " unless -a is used. Balance number of lines in the\n" " columns on each page.\n" msgstr "" #: src/pr.c:2770 msgid "" " -a, --across print columns across rather than down, used together\n" " with -COLUMN\n" " -c, --show-control-chars\n" " use hat notation (^G) and octal backslash notation\n" " -d, --double-space\n" " double space the output\n" msgstr "" #: src/pr.c:2778 msgid "" " -D, --date-format=FORMAT\n" " use FORMAT for the header date\n" " -e[CHAR[WIDTH]], --expand-tabs[=CHAR[WIDTH]]\n" " expand input CHARs (TABs) to tab WIDTH (8)\n" " -F, -f, --form-feed\n" " use form feeds instead of newlines to separate pages\n" " (by a 3-line page header with -F or a 5-line header\n" " and trailer without -F)\n" msgstr "" #: src/pr.c:2788 msgid "" " -h HEADER, --header=HEADER\n" " use a centered HEADER instead of filename in page header,\n" " -h \"\" prints a blank line, don't use -h\"\"\n" " -i[CHAR[WIDTH]], --output-tabs[=CHAR[WIDTH]]\n" " replace spaces with CHARs (TABs) to tab WIDTH (8)\n" " -J, --join-lines merge full lines, turns off -W line truncation, no column\n" " alignment, -S[STRING] sets separators\n" msgstr "" #: src/pr.c:2797 msgid "" " -l PAGE_LENGTH, --length=PAGE_LENGTH\n" " set the page length to PAGE_LENGTH (66) lines\n" " (default number of lines of text 56, and with -F 63)\n" " -m, --merge print all files in parallel, one in each column,\n" " truncate lines, but join lines of full length with -J\n" msgstr "" #: src/pr.c:2804 msgid "" " -n[SEP[DIGITS]], --number-lines[=SEP[DIGITS]]\n" " number lines, use DIGITS (5) digits, then SEP (TAB),\n" " default counting starts with 1st line of input file\n" " -N NUMBER, --first-line-number=NUMBER\n" " start counting with NUMBER at 1st line of first\n" " page printed (see +FIRST_PAGE)\n" msgstr "" #: src/pr.c:2812 msgid "" " -o MARGIN, --indent=MARGIN\n" " offset each line with MARGIN (zero) spaces, do not\n" " affect -w or -W, MARGIN will be added to PAGE_WIDTH\n" " -r, --no-file-warnings\n" " omit warning when a file cannot be opened\n" msgstr "" #: src/pr.c:2819 msgid "" " -s[CHAR],--separator[=CHAR]\n" " separate columns by a single character, default for CHAR\n" " is the character without -w and 'no char' with -w\n" " -s[CHAR] turns off line truncation of all 3 column\n" " options (-COLUMN|-a -COLUMN|-m) except -w is set\n" msgstr "" #: src/pr.c:2826 msgid "" " -S[STRING], --sep-string[=STRING]\n" " separate columns by an optional STRING, don't use\n" " -S \"STRING\", -S only: No separator used (same as -S\"\"),\n" " without -S: Default separator with -J and \n" " otherwise (same as -S\" \"), no effect on column options\n" " -t, --omit-header omit page headers and trailers\n" msgstr "" #: src/pr.c:2834 msgid "" " -T, --omit-pagination\n" " omit page headers and trailers, eliminate any pagination\n" " by form feeds set in input files\n" " -v, --show-nonprinting\n" " use octal backslash notation\n" " -w PAGE_WIDTH, --width=PAGE_WIDTH\n" " set page width to PAGE_WIDTH (72) characters for\n" " multiple text-column output only, -s[char] turns off (72)\n" msgstr "" #: src/pr.c:2844 msgid "" " -W PAGE_WIDTH, --page-width=PAGE_WIDTH\n" " set page width to PAGE_WIDTH (72) characters always,\n" " truncate lines, except -J option is set, no interference\n" " with -S or -s\n" msgstr "" #: src/pr.c:2852 msgid "" "\n" "-T implied by -l nn when nn <= 10 or <= 3 with -F. With no FILE, or when\n" "FILE is -, read standard input.\n" msgstr "" #: src/ptx.c:410 #, c-format msgid "%s (for regexp `%s')" msgstr "" #: src/ptx.c:1859 #, c-format msgid "" "Usage: %s [OPTION]... [INPUT]... (without -G)\n" " or: %s -G [OPTION]... [INPUT [OUTPUT]]\n" msgstr "" #: src/ptx.c:1863 msgid "Output a permuted index, including context, of the words in the input files.\n\n" msgstr "" #: src/ptx.c:1870 msgid "" " -A, --auto-reference output automatically generated references\n" " -C, --copyright display Copyright and copying conditions\n" " -G, --traditional behave more like System V `ptx'\n" " -F, --flag-truncation=STRING use STRING for flagging line truncations\n" msgstr "" #: src/ptx.c:1876 msgid "" " -M, --macro-name=STRING macro name to use instead of `xx'\n" " -O, --format=roff generate output as roff directives\n" " -R, --right-side-refs put references at right, not counted in -w\n" " -S, --sentence-regexp=REGEXP for end of lines or end of sentences\n" " -T, --format=tex generate output as TeX directives\n" msgstr "" #: src/ptx.c:1883 msgid "" " -W, --word-regexp=REGEXP use REGEXP to match each keyword\n" " -b, --break-file=FILE word break characters in this FILE\n" " -f, --ignore-case fold lower case to upper case for sorting\n" " -g, --gap-size=NUMBER gap size in columns between output fields\n" " -i, --ignore-file=FILE read ignore word list from FILE\n" " -o, --only-file=FILE read only word list from this FILE\n" msgstr "" #: src/ptx.c:1891 msgid "" " -r, --references first field of each line is a reference\n" " -t, --typeset-mode - not implemented -\n" " -w, --width=NUMBER output width in columns, reference excluded\n" msgstr "" #: src/ptx.c:1898 msgid "\nWith no FILE or if FILE is -, read Standard Input. `-F /' by default.\n" msgstr "" #: src/ptx.c:1978 msgid "" "This program is free software; you can redistribute it and/or modify\n" "it under the terms of the GNU General Public License as published by\n" "the Free Software Foundation; either version 2, or (at your option)\n" "any later version.\n" "\n" msgstr "" #: src/ptx.c:1985 msgid "" "This program is distributed in the hope that it will be useful,\n" "but WITHOUT ANY WARRANTY; without even the implied warranty of\n" "MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n" "GNU General Public License for more details.\n" "\n" msgstr "" #: src/ptx.c:1992 msgid "" "You should have received a copy of the GNU General Public License\n" "along with this program; if not, write to the Free Software Foundation,\n" "Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n" msgstr "" #. The official name of this program (e.g., no `g' prefix). #: src/sort.c:52 msgid "Mike Haertel and Paul Eggert" msgstr "" #: src/sort.c:288 msgid "" "Write sorted concatenation of all FILE(s) to standard output.\n" "\n" "Ordering options:\n" "\n" msgstr "" #: src/sort.c:297 msgid "" " -b, --ignore-leading-blanks ignore leading blanks\n" " -d, --dictionary-order consider only blanks and alphanumeric characters\n" " -f, --ignore-case fold lower case to upper case characters\n" msgstr "" #: src/sort.c:302 msgid "" " -g, --general-numeric-sort compare according to general numerical value\n" " -i, --ignore-nonprinting consider only printable characters\n" " -M, --month-sort compare (unknown) < `JAN' < ... < `DEC'\n" " -n, --numeric-sort compare according to string numerical value\n" " -r, --reverse reverse the result of comparisons\n" "\n" msgstr "" #: src/sort.c:310 msgid "" "Other options:\n" "\n" " -c, --check check whether input is sorted; do not sort\n" " -k, --key=POS1[,POS2] start a key at POS1, end it at POS 2 (origin 1)\n" " -m, --merge merge already sorted files; do not sort\n" " -o, --output=FILE write result to FILE instead of standard output\n" " -s, --stable stabilize sort by disabling last-resort comparison\n" " -S, --buffer-size=SIZE use SIZE for main memory buffer\n" msgstr "" #: src/sort.c:320 #, c-format msgid "" " -t, --field-separator=SEP use SEP instead of non- to whitespace transition\n" " -T, --temporary-directory=DIR use DIR for temporaries, not $TMPDIR or %s\n" " multiple options specify multiple directories\n" " -u, --unique with -c: check for strict ordering\n" " otherwise: output only the first of an equal run\n" msgstr "" #: src/sort.c:327 msgid " -z, --zero-terminated end lines with 0 byte, not newline\n" msgstr "" #: src/sort.c:331 msgid "" " +POS1 [-POS2] start a key at POS1, end it before POS2 (origin 0)\n" " Warning: this option is obsolete\n" msgstr "" #: src/sort.c:337 msgid "" "\n" "POS is F[.C][OPTS], where F is the field number and C the character position\n" "in the field. OPTS is one or more single-letter ordering options, which\n" "override global ordering options for that key. If no key is given, use the\n" "entire line as the key.\n" "\n" "SIZE may be followed by the following multiplicative suffixes:\n" msgstr "" #: src/sort.c:346 #, c-format msgid "" "% 1% of memory, b 1, K 1024 (default), and so on for M, G, T, P, E, Z, Y.\n" "\n" "With no FILE, or when FILE is -, read standard input.\n" "\n" "*** WARNING ***\n" "The locale specified by the environment affects sort order.\n" "Set LC_ALL=C to get the traditional sort order that uses\n" "native byte values.\n" msgstr "" #: src/sort.c:455 msgid "cannot create temporary file" msgstr "" #: src/sort.c:478 msgid "open failed" msgstr "" #: src/sort.c:498 src/sort.c:2502 msgid "close failed" msgstr "" #: src/sort.c:506 msgid "write failed" msgstr "" #: src/sort.c:652 msgid "sort size" msgstr "" #: src/sort.c:726 msgid "stat failed" msgstr "" #: src/sort.c:977 msgid "read failed" msgstr "" #: src/sort.c:1577 #, c-format msgid "%s: %s:%s: disorder: " msgstr "" #: src/sort.c:1581 msgid "standard error" msgstr "" #: src/sort.c:2039 #, c-format msgid "%s: invalid field specification `%s'" msgstr "" #: src/sort.c:2065 #, c-format msgid "%s: count `%.*s' too large" msgstr "" #: src/sort.c:2071 #, c-format msgid "%s: invalid count at start of `%s'" msgstr "" #: src/sort.c:2297 #, c-format msgid "warning: `sort %s' is obsolete; use `sort -k'" msgstr "" #: src/sort.c:2304 msgid "invalid number after `-'" msgstr "" #: src/sort.c:2307 src/sort.c:2353 src/sort.c:2380 msgid "invalid number after `.'" msgstr "" #: src/sort.c:2310 src/sort.c:2389 msgid "stray character in field spec" msgstr "" #: src/sort.c:2344 msgid "invalid number at field start" msgstr "" #. Provoke with `sort -k0' #: src/sort.c:2348 src/sort.c:2376 msgid "field number is zero" msgstr "" #. Provoke with `sort -k1.0' #: src/sort.c:2357 msgid "character offset is zero" msgstr "" #: src/sort.c:2372 msgid "invalid number after `,'" msgstr "" #. Provoke with `sort -txx'. Complain about #. "multi-character tab" instead of "multibyte tab", so #. that the diagnostic's wording does not need to be #. changed once multibyte characters are supported. #: src/sort.c:2417 #, c-format msgid "multi-character tab `%s'" msgstr "" #: src/sort.c:2485 #, c-format msgid "extra operand `%s' not allowed with -c" msgstr "" #: src/split.c:87 #, c-format msgid "Usage: %s [OPTION] [INPUT [PREFIX]]\n" msgstr "" #: src/split.c:91 msgid "" "Output fixed-size pieces of INPUT to PREFIXaa, PREFIXab, ...; default\n" "PREFIX is `x'. With no INPUT, or when INPUT is -, read standard input.\n" "\n" msgstr "" #: src/split.c:99 msgid "" " -b, --bytes=SIZE put SIZE bytes per output file\n" " -C, --line-bytes=SIZE put at most SIZE bytes of lines per output file\n" " -l, --lines=NUMBER put NUMBER lines per output file\n" " -NUMBER same as -l NUMBER\n" " --verbose print a diagnostic to standard error just\n" " before each output file is opened\n" msgstr "" #: src/split.c:109 msgid "\nSIZE may have a multiplier suffix: b for 512, k for 1K, m for 1 Meg.\n" msgstr "" #: src/split.c:164 #, c-format msgid "creating file `%s'\n" msgstr "" #: src/split.c:383 src/split.c:399 src/split.c:415 src/split.c:441 msgid "cannot split in more than one way" msgstr "" #: src/split.c:390 src/split.c:423 #, c-format msgid "%s: invalid number of bytes" msgstr "" #: src/split.c:406 #, c-format msgid "%s: invalid number of lines" msgstr "" #: src/split.c:473 msgid "invalid number" msgstr "" #: src/split.c:488 src/tr.c:1847 msgid "too many arguments" msgstr "" #. The official name of this program (e.g., no `g' prefix). #: src/sum.c:36 msgid "Kayvan Aghaiepour and David MacKenzie" msgstr "" #: src/sum.c:64 msgid "" "Print checksum and block counts for each FILE.\n" "\n" " -r defeat -s, use BSD sum algorithm, use 1K blocks\n" " -s, --sysv use System V sum algorithm, use 512 bytes blocks\n" msgstr "" #: src/sys2.h:407 msgid " --help display this help and exit\n" msgstr "" #: src/sys2.h:409 msgid " --version output version information and exit\n" msgstr "" #. The official name of this program (e.g., no `g' prefix). #: src/tac.c:54 msgid "Jay Lepreau and David MacKenzie" msgstr "" #: src/tac.c:131 msgid "" "Write each FILE to standard output, last line first.\n" "With no FILE, or when FILE is -, read standard input.\n" "\n" msgstr "" #: src/tac.c:139 msgid "" " -b, --before attach the separator before instead of after\n" " -r, --regex interpret the separator as a regular expression\n" " -s, --separator=STRING use STRING as the separator instead of newline\n" msgstr "" #: src/tac.c:454 src/tac.c:593 msgid "stdin: read error" msgstr "" #: src/tac.c:639 msgid "separator cannot be empty" msgstr "" #: src/tail.c:241 #, c-format msgid "" "Print the last %d lines of each FILE to standard output.\n" "With more than one FILE, precede each with a header giving the file name.\n" "With no FILE, or when FILE is -, read standard input.\n" "\n" msgstr "" #: src/tail.c:250 msgid "" " --retry keep trying to open a file even if it is\n" " inaccessible when tail starts or if it becomes\n" " inaccessible later -- useful only with -f\n" " -c, --bytes=N output the last N bytes\n" msgstr "" #: src/tail.c:256 msgid "" " -f, --follow[={name|descriptor}]\n" " output appended data as the file grows;\n" " -f, --follow, and --follow=descriptor are\n" " equivalent\n" " -F same as --follow=name --retry\n" msgstr "" #: src/tail.c:263 #, c-format msgid "" " -n, --lines=N output the last N lines, instead of the last %d\n" " --max-unchanged-stats=N\n" " with --follow=name, reopen a FILE which has not\n" " changed size after N (default %d) iterations\n" " to see if it has been unlinked or renamed\n" " (this is the usual case of rotated log files)\n" msgstr "" #: src/tail.c:274 msgid "" " --pid=PID with -f, terminate after process ID, PID dies\n" " -q, --quiet, --silent never output headers giving file names\n" " -s, --sleep-interval=S with -f, each iteration lasts approximately S\n" " (default 1) seconds\n" " -v, --verbose always output headers giving file names\n" msgstr "" #: src/tail.c:283 msgid "" "\n" "If the first character of N (the number of bytes or lines) is a `+',\n" "print beginning with the Nth item from the start of each file, otherwise,\n" "print the last N items in the file. N may have a multiplier suffix:\n" "b for 512, k for 1024, m for 1048576 (1 Meg). " msgstr "" #: src/tail.c:290 msgid "" "A first OPTION of -VALUE\n" "is treated like -n VALUE unless VALUE has one of the [bkm] suffix\n" "multipliers, in which case it is treated like -c VALUE.\n" msgstr "" #: src/tail.c:296 msgid "" "A first option of +VALUE is treated like -+VALUE, but this usage is obsolete\n" "and support for it will be withdrawn.\n" "\n" msgstr "" #: src/tail.c:301 msgid "" "With --follow (-f), tail defaults to following the file descriptor, which\n" "means that even if a tail'ed file is renamed, tail will continue to track\n" "its end. " msgstr "" #: src/tail.c:306 msgid "" "This default behavior is not desirable when you really want to\n" "track the actual name of the file, not the file descriptor (e.g., log\n" "rotation). Use --follow=name in that case. That causes tail to track the\n" "named file by reopening it periodically to see if it has been removed and\n" "recreated by some other program.\n" "\n" msgstr "" #: src/tail.c:345 #, c-format msgid "closing %s (fd=%d)" msgstr "" #: src/tail.c:410 #, c-format msgid "%s: cannot seek to offset %s%s" msgstr "" #: src/tail.c:414 #, c-format msgid "%s: cannot seek to relative offset %s%s" msgstr "" #: src/tail.c:418 #, c-format msgid "%s: cannot seek to end-relative offset %s%s" msgstr "" #. FIXME-maybe: detect the case in which the file first becomes #. unreadable (perms), and later becomes readable again and can #. be seen to be the same file (dev/ino). Otherwise, tail prints #. the entire contents of the file when it becomes readable. #: src/tail.c:813 #, c-format msgid "`%s' has become inaccessible" msgstr "" #: src/tail.c:830 #, c-format msgid "`%s' has been replaced with an untailable file; giving up on this name" msgstr "" #: src/tail.c:851 #, c-format msgid "`%s' has become accessible" msgstr "" #: src/tail.c:859 #, c-format msgid "`%s' has appeared; following end of new file" msgstr "" #: src/tail.c:870 #, c-format msgid "`%s' has been replaced; following end of new file" msgstr "" #: src/tail.c:997 #, c-format msgid "%s: file truncated" msgstr "" #: src/tail.c:1017 msgid "no files remaining" msgstr "" #: src/tail.c:1224 #, c-format msgid "%s: cannot follow end of this type of file; giving up on this name" msgstr "" #: src/tail.c:1341 #, c-format msgid "%c: invalid suffix character in obsolescent option" msgstr "" #: src/tail.c:1392 #, c-format msgid "" "too many arguments; When using tail's obsolescent option syntax (%s)\n" "there may be no more than one file argument. Use the equivalent -n or -c\n" "option instead." msgstr "" #: src/tail.c:1401 #, c-format msgid "" "Warning: it is not portable to use two or more file arguments with\n" "tail's obsolescent option syntax (%s). Use the equivalent -n or -c\n" "option instead." msgstr "" #: src/tail.c:1410 #, c-format msgid "warning: `tail %s' is obsolete; use -n or -c instead" msgstr "" #: src/tail.c:1467 #, c-format msgid "%s: is so large that it is not representable" msgstr "" #: src/tail.c:1471 #, c-format msgid "%s is larger than the maximum file size on this system" msgstr "" #: src/tail.c:1497 #, c-format msgid "%s: invalid maximum number of unchanged stats between opens" msgstr "" #: src/tail.c:1509 #, c-format msgid "%s: invalid maximum number of consecutive size changes" msgstr "" #: src/tail.c:1521 #, c-format msgid "%s: invalid PID" msgstr "" #: src/tail.c:1539 #, c-format msgid "%s: invalid number of seconds" msgstr "" #: src/tail.c:1559 msgid "warning: --retry is useful only when following by name" msgstr "" #: src/tail.c:1563 msgid "warning: PID ignored; --pid=PID is useful only when following" msgstr "" #: src/tail.c:1566 msgid "warning: --pid=PID is not supported on this system" msgstr "" #: src/tr.c:327 #, c-format msgid "Usage: %s [OPTION]... SET1 [SET2]\n" msgstr "" #: src/tr.c:331 msgid "" "Translate, squeeze, and/or delete characters from standard input,\n" "writing to standard output.\n" "\n" " -c, --complement first complement SET1\n" " -d, --delete delete characters in SET1, do not translate\n" " -s, --squeeze-repeats replace sequence of characters with one\n" " -t, --truncate-set1 first truncate SET1 to length of SET2\n" msgstr "" #: src/tr.c:342 msgid "" "\n" "SETs are specified as strings of characters. Most represent themselves.\n" "Interpreted sequences are:\n" "\n" " \\NNN character with octal value NNN (1 to 3 octal digits)\n" " \\\\ backslash\n" " \\a audible BEL\n" " \\b backspace\n" " \\f form feed\n" " \\n new line\n" " \\r return\n" " \\t horizontal tab\n" msgstr "" #: src/tr.c:356 msgid "" " \\v vertical tab\n" " CHAR1-CHAR2 all characters from CHAR1 to CHAR2 in ascending order\n" " [CHAR*] in SET2, copies of CHAR until length of SET1\n" " [CHAR*REPEAT] REPEAT copies of CHAR, REPEAT octal if starting with 0\n" " [:alnum:] all letters and digits\n" " [:alpha:] all letters\n" " [:blank:] all horizontal whitespace\n" " [:cntrl:] all control characters\n" " [:digit:] all digits\n" msgstr "" #: src/tr.c:367 msgid "" " [:graph:] all printable characters, not including space\n" " [:lower:] all lower case letters\n" " [:print:] all printable characters, including space\n" " [:punct:] all punctuation characters\n" " [:space:] all horizontal or vertical whitespace\n" " [:upper:] all upper case letters\n" " [:xdigit:] all hexadecimal digits\n" " [=CHAR=] all characters which are equivalent to CHAR\n" msgstr "" #: src/tr.c:377 msgid "" "\n" "Translation occurs if -d is not given and both SET1 and SET2 appear.\n" "-t may be used only when translating. SET2 is extended to length of\n" "SET1 by repeating its last character as necessary. " msgstr "" #: src/tr.c:383 msgid "" "Excess characters\n" "of SET2 are ignored. Only [:lower:] and [:upper:] are guaranteed to\n" "expand in ascending order; used in SET2 while translating, they may\n" "only be used in pairs to specify case conversion. " msgstr "" #: src/tr.c:389 msgid "" "-s uses SET1 if not\n" "translating nor deleting; else squeezing uses SET2 and occurs after\n" "translation or deletion.\n" msgstr "" #. Any octal number larger than 0377 won't #. fit in 8 bits. So we stop when adding the #. next digit would put us over the limit and #. give a warning about the ambiguity. POSIX #. isn't clear on this, but one person has said #. that in his interpretation, POSIX says tr #. can't even give a warning. #: src/tr.c:555 #, c-format msgid "" "warning: the ambiguous octal escape \\%c%c%c is being\n" "\tinterpreted as the 2-byte sequence \\0%c%c, `%c'" msgstr "" #: src/tr.c:564 msgid "invalid backslash escape at end of string" msgstr "" #: src/tr.c:570 #, c-format msgid "invalid backslash escape `\\%c'" msgstr "" #: src/tr.c:723 #, c-format msgid "range-endpoints of `%s-%s' are in reverse collating sequence order" msgstr "" #: src/tr.c:904 #, c-format msgid "invalid repeat count `%s' in [c*n] construct" msgstr "" #: src/tr.c:997 msgid "missing character class name `[::]'" msgstr "" #: src/tr.c:1000 msgid "missing equivalence class character `[==]'" msgstr "" #: src/tr.c:1023 #, c-format msgid "invalid character class `%s'" msgstr "" #: src/tr.c:1048 #, c-format msgid "%s: equivalence class operand must be a single character" msgstr "" #: src/tr.c:1520 msgid "the [c*] repeat construct may not appear in string1" msgstr "" #: src/tr.c:1530 msgid "only one [c*] repeat construct may appear in string2" msgstr "" #: src/tr.c:1538 msgid "[=c=] expressions may not appear in string2 when translating" msgstr "" #: src/tr.c:1551 msgid "when not truncating set1, string2 must be non-empty" msgstr "" #: src/tr.c:1560 msgid "" "when translating with complemented character classes,\n" "string2 must map all characters in the domain to one" msgstr "" #: src/tr.c:1567 msgid "" "when translating, the only character classes that may appear in\n" "string2 are `upper' and `lower'" msgstr "" #: src/tr.c:1576 msgid "the [c*] construct may appear in string2 only when translating" msgstr "" #: src/tr.c:1852 msgid "two strings must be given when translating" msgstr "" #: src/tr.c:1855 msgid "two strings must be given when both deleting and squeezing repeats" msgstr "" #: src/tr.c:1869 msgid "only one string may be given when deleting without squeezing repeats" msgstr "" #: src/tr.c:1875 msgid "at least one string must be given when squeezing repeats" msgstr "" #: src/tr.c:1966 msgid "misaligned [:upper:] and/or [:lower:] construct" msgstr "" #: src/tr.c:1989 msgid "" "invalid identity mapping; when translating, any [:lower:] or [:upper:]\n" "construct in string1 must be aligned with a corresponding construct\n" "([:upper:] or [:lower:], respectively) in string2" msgstr "" #: src/tsort.c:97 #, c-format msgid "" "Usage: %s [OPTION] [FILE]\n" "Write totally ordered list consistent with the partial ordering in FILE.\n" "With no FILE, or when FILE is -, read standard input.\n" "\n" msgstr "" #. The input contains a loop. #: src/tsort.c:533 #, c-format msgid "%s: input contains a loop:" msgstr "" #: src/tsort.c:575 msgid "only one argument may be specified" msgstr "" #: src/unexpand.c:379 msgid "" "Convert spaces in each FILE to tabs, writing to standard output.\n" "With no FILE, or when FILE is -, read standard input.\n" "\n" msgstr "" #: src/unexpand.c:387 msgid "" " -a, --all convert all whitespace, instead of initial whitespace\n" " -t, --tabs=NUMBER have tabs NUMBER characters apart instead of 8\n" " -t, --tabs=LIST use comma separated list of explicit tab positions\n" msgstr "" #: src/uniq.c:133 #, c-format msgid "Usage: %s [OPTION]... [INPUT [OUTPUT]]\n" msgstr "" #: src/uniq.c:137 msgid "" "Discard all but one of successive identical lines from INPUT (or\n" "standard input), writing to OUTPUT (or standard output).\n" "\n" msgstr "" #: src/uniq.c:145 msgid "" " -c, --count prefix lines by the number of occurrences\n" " -d, --repeated only print duplicate lines\n" msgstr "" #: src/uniq.c:149 msgid "" " -D, --all-repeated[=delimit-method] print all duplicate lines\n" " delimit-method={none(default),prepend,separate}\n" " Delimiting is done with blank lines.\n" " -f, --skip-fields=N avoid comparing the first N fields\n" " -i, --ignore-case ignore differences in case when comparing\n" " -s, --skip-chars=N avoid comparing the first N characters\n" " -u, --unique only print unique lines\n" msgstr "" #: src/uniq.c:158 msgid "" " -w, --check-chars=N compare no more than N characters in lines\n" " -N same as -f N\n" msgstr "" #: src/uniq.c:163 msgid " +N same as -s N (obsolete; will be withdrawn)\n" msgstr "" #: src/uniq.c:168 msgid "" "\n" "A field is a run of whitespace, then non-whitespace characters.\n" "Fields are skipped before chars.\n" msgstr "" #: src/uniq.c:381 #, c-format msgid "error reading %s" msgstr "" #: src/uniq.c:386 #, c-format msgid "error writing %s" msgstr "" #: src/uniq.c:432 src/uniq.c:455 #, c-format msgid "extra operand `%s'" msgstr "" #: src/uniq.c:449 #, c-format msgid "warning: `uniq %s' is obsolete; use `uniq -s %s' instead" msgstr "" #: src/uniq.c:478 src/uniq.c:502 msgid "invalid number of fields to skip" msgstr "" #: src/uniq.c:511 msgid "invalid number of bytes to skip" msgstr "" #: src/uniq.c:520 msgid "invalid number of bytes to compare" msgstr "" #: src/uniq.c:535 msgid "printing all duplicated lines and repeat counts is meaningless" msgstr "" #. The official name of this program (e.g., no `g' prefix). #: src/wc.c:78 msgid "Paul Rubin and David MacKenzie" msgstr "" #: src/wc.c:132 msgid "" "Print newline, word, and byte counts for each FILE, and a total line if\n" "more than one FILE is specified. With no FILE, or when FILE is -,\n" "read standard input.\n" " -c, --bytes print the byte counts\n" " -m, --chars print the character counts\n" " -l, --lines print the newline counts\n" msgstr "" #: src/wc.c:140 msgid "" " -L, --max-line-length print the length of the longest line\n" " -w, --words print the word counts\n" msgstr "" #: src/wc.c:589 msgid "total" msgstr ""